Standar material

Architectural Metal Fence Systems

Designation Title

F2408 - 11 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets

F2453 / F2453M - 14

Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshesof 6 in. 2 ? [3871 mm 2 ] or Less, in Panels or Rolls, with Uniform Meshes

F2548 - 12 Standard Specification for Expanded Metal Fence Systems for Security Purposes

F2589 - 11 Standard Specification for Ornamental Fences Employing Steel Tubular Pickets

F2919 / F2919M - 12

Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in. 2 [3871 mm 2 ] in Panels

F2957 - 13 Standard Specification for Ornamental Aluminum Fence Systems

Bars

Designation TitleA29 / A29M - 12e1

Standard Specification for General Requirements forSteel Bars, Carbon and Alloy, Hot-Wrought

A108 - 13 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished

A125 - 96(2013)e1

Standard Specification for Steel Springs, Helical, Heat-Treated

A255 - 10 Standard Test Methods for Determining Hardenabilityof Steel

A304 - 11Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements

A311 / A311M - 04(2010)

Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements

A322 - 13 Standard Specification for Steel Bars, Alloy,

Designation TitleStandard Grades

A355 - 89(2012)

Standard Specification for Steel Bars, Alloys, for Nitriding

A400 - 69(2012)

Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties

A434 - 06(2012)

Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered

A499 - 89(2008)

Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails

A575 - 96(2013)e1

Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades

A576 - 90b(2012)

Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality

A663 / A663M - 12

Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties

A675 / A675M - 14

Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

A689 - 97(2013)e1

Standard Specification for Carbon and Alloy Steel Bars for Springs

A696 - 90a(2012)

Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components

A702 - 13 Standard Specification for Steel Fence Posts, Hot Wrought

A739 - 90a(2012)

Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both

A914 / A914M - 92(2011)

Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements

A920 / A920M - 07

Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties

A921 / A921M - 93(2011)

Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging

A1040 - 10 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy,

Designation Titleand Alloy Steels

A1075 - 12 Standard Specification for Flanged Steel U-Channel Posts

E618 - 07(2013)

Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine

Bearing Steels

Designation TitleA295 / A295M- 09

Standard Specification for High-Carbon Anti-FrictionBearing Steel

A485 - 09 Standard Specification for High Hardenability Antifriction Bearing Steel

A534 - 09 Standard Specification for Carburizing Steels for Anti-Friction Bearings

A756 - 09 Standard Specification for Stainless Anti-Friction Bearing Steel

A866 - 09 Standard Specification for Medium Carbon Anti-Friction Bearing Steel

A892 - 09 Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels

E588 - 03(2009)

Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method

Carbon Steel Tubular Products

Designation TitleA53 / A53M - 12

Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

A106 / A106M - 14

Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

A134 - 96(2012)

Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

A135 / A135M - 09(2014)

Standard Specification for Electric-Resistance-Welded Steel Pipe

A139 / A139M Standard Specification for Electric-Fusion (Arc)-

Designation Title- 04(2010) Welded Steel Pipe (NPS 4 and Over)

A178 / A178M - 02(2012)

Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

A179 / A179M - 90a(2012)

Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

A192 / A192M - 02(2012)

Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

A210 / A210M - 02(2012)

Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

A214 / A214M - 96(2012)

Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

A252 - 10 Standard Specification for Welded and Seamless SteelPipe Piles

A254 / A254M - 12

Standard Specification for Copper-Brazed Steel Tubing

A381 - 96(2012)

Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems

A423 / A423M - 09(2014)

Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

A450 / A450M - 10

Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

A498 / A498M - 14

Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins

A500 / A500M - 13

Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

A501 - 07 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

A512 - 06(2012)

Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

A513 / A513M - 14

Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

A519 - 06(2012)

Standard Specification for Seamless Carbon and AlloySteel Mechanical Tubing

Designation Title

A523 - 96(2012)

Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

A524 - 96(2012)

Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

A530 / A530M - 12

Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

A556 / A556M - 96(2012)

Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes

A587 - 96(2012)

Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

A589 / A589M - 06(2012)

Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe

A595 / A595M - 14

Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

A618 / A618M - 04(2010)

Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

A671 / A671M - 14

Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

A672 / A672M - 14

Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

A691 / A691M - 09(2014)

Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

A733 - 13Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

A787 / A787M - 14

Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing

A795 / A795M - 13

Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

A822 / A822M Standard Specification for Seamless Cold-Drawn

Designation Title- 04(2010) Carbon Steel Tubing for Hydraulic System Service

A847 / A847M - 14

Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

A865 / A865M - 06(2012)

Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints

A972 / A972M - 00(2010)

Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles

A1005 / A1005M - 00(2010)

Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded

A1006 / A1006M - 00(2010)

Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded

A1020 / A1020M - 02(2012)

Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications

A1024 / A1024M - 02(2012)

Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless

A1037 / A1037M - 05(2012)

Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded

A1065 / A1065M - 09(2014)

Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point

A1076 / A1076M - 13

Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic PrecoatedSheet Steel

A1085 - 13 Standard Specification for Cold-Formed Welded CarbonSteel Hollow Structural Sections (HSS)

Castings


Standard Specification for Steel Castings, Carbon, for General Application

A99 - 03(2009) Standard Specification for Ferromanganese

A100 - 07(2012) Standard Specification for Ferrosilicon

A101 - 04(2009) Standard Specification for Ferrochromium

A102 - 04(2009) Standard Specification for Ferrovanadium

A128 / A128M - 93(2012)

Standard Specification for Steel Castings, Austenitic Manganese

A132 - 04(2009) Standard Specification for Ferromolybdenum

A144 - 04(2009) Specification for Ferrotungsten

A146 - 04(2009) Standard Specification for Molybdenum Oxide Products

A148 / A148M - 08

Standard Specification for Steel Castings, High Strength, for Structural Purposes

A216 / A216M - 14

Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

A217 / A217M - 12

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

A297 / A297M - 14

Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

A323 - 05(2010) Standard Specification for Ferroboron

A324 - 08(2013) Standard Specification for Ferrotitanium

A351 / A351M - 14

Standard Specification for Castings, Austenitic, forPressure-Containing Parts

Designation Title

A352 / A352M - 06(2012)

Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

A356 / A356M - 11

Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

A389 / A389M - 13

Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service

A426 / A426M - 13

Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

A447 / A447M - 11

Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

A451 / A451M - 06(2010)

Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

A481 - 05(2010) Standard Specification for Chromium Metal

A482 / A482M - 11 Standard Specification for Ferrochrome-Silicon

A483 / A483M - 10 Standard Specification for Silicomanganese

A487 / A487M - 14

Standard Specification for Steel Castings Suitable for Pressure Service

A488 / A488M - 12

Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

A494 / A494M - 14

Standard Specification for Castings, Nickel and Nickel Alloy

A495 - 06(2010) Standard Specification for Calcium-Silicon Alloys

A550 - 06(2010) Standard Specification for Ferrocolumbium

A560 / A560M - 12

Standard Specification for Castings, Chromium-NickelAlloy

A601 / A601M - 10

Standard Specification for Electrolytic Manganese Metal

Designation Title

A608 / A608M - 12

Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

A609 / A609M - 12

Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof

A610 - 79(2009)

Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size

A636 - 08(2013) Standard Specification for Nickel Oxide Sinter

A660 / A660M - 11

Standard Specification for Centrifugally Cast CarbonSteel Pipe for High-Temperature Service

A701 / A701M - 10 Standard Specification for Ferromanganese-Silicon

A703 / A703M - 13a

Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

A732 / A732M - 14

Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures

A743 / A743M - 13ae1

Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

A744 / A744M - 13

Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

A747 / A747M - 12

Standard Specification for Steel Castings, Stainless, Precipitation Hardening

A757 / A757M - 10

Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service

A781 / A781M - 14a

Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

A799 / A799M - 10

Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content

A800 / A800M Standard Practice for Steel Casting, Austenitic

Designation Title- 10 Alloy, Estimating Ferrite Content ThereofA802 / A802M - 95(2010)e1

Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination

A835 / A835M - 10

Standard Specification for Sizes of Ferroalloys and Alloy Additives

A872 / A872M - 07a(2012)

Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

A890 / A890M - 13

Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

A903 / A903M - 99(2012)

Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection

A915 / A915M - 08(2013)

Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to StandardWrought Grades

A922 - 05(2010) Standard Specification for Silicon Metal

A957 / A957M - 13

Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

A958 / A958M - 14

Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

A985 / A985M - 13

Standard Specification for Steel Investment CastingsGeneral Requirements, for Pressure-Containing Parts

A990 / A990M - 11e01

Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled forPressure Retaining Parts for Corrosive Service

A995 / A995M - 13

Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts

A997 - 08(2012)

Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination

A1001 - 01(2010)

Standard Specification for High Strength Steel Castings in Heavy Sections

Designation Title

A1002 - 10 Standard Specification for Castings, Nickel-AluminumOrdered Alloy

A1025 / A1025M - 10

Standard Specification for Ferroalloys, General Requirements

A1062 - 10 Standard Specification for Steel Castings SamplingA1067 / A1067M - 12a

Standard Specification for Test Coupons for Steel Castings

A1080 - 12 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings

Chain Link Fence and Wire Accessories

Designation Title

A392 - 11a Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

A491 - 11 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

A824 - 01(2012)

Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

F552 - 02(2013) Standard Terminology Relating to Chain Link Fencing

F567 - 14 Standard Practice for Installation of Chain-Link Fence

F626 - 14 Standard Specification for Fence FittingsF654 - 07(2012)

Standard Specification for Residential Chain Link Fence Gates

F668 - 11Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric

F900 - 11 Standard Specification for Industrial and Commercial Swing Gates

F934 - 96(2013)

Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials

F1043 - 13 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

F1083 - 13 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

Designation TitleF1183 - 96(2011)

Standard Specification for Aluminum Alloy Chain Link Fence Fabric

F1184 - 05(2010)

Standard Specification for Industrial and Commercial Horizontal Slide Gates

F1345 - 10a Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

F1379 - 95(2013) Standard Terminology Relating to Barbed Tape

F1553 - 11 Standard Guide for Specifying Chain Link Fence

F1664 - 08(2013)

Standard Specification for Poly(Vinyl Chloride) (PVC)and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

F1665 - 08(2013)

Standard Specification for Poly(Vinyl Chloride) (PVC)and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

F1910 - 98(2013) Standard Specification for Long Barbed Tape Obstacles

F1911 - 05(2010) Standard Practice for Installation of Barbed Tape

F3000 / F3000M - 13

Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats

Computer Applications

Designation Title

F1716 - 96(2008)

Standard Guide for Transition and Performance of Marine Software Systems Maintenance

F1756 - 97a(2008)

Standard Guide for Implementation of a Fleet Management System Network

F1757 - 96(2008)

Standard Guide for Digital Communication Protocols forComputerized Systems

F2001 - 01(2006)

Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record

Designation Title

F2017 - 00(2006)

Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration

F2218 - 02(2008)

Standard Guide for Hardware Implementation for Computerized Systems

F2446 - 04(2010)

Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange

Corrugated Steel Pipe Specifications

Designation Title

A742 / A742M - 13

Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe

A760 / A760M - 13

Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

A761 / A761M - 13b

Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

A762 / A762M - 08

Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains

A796 / A796M - 13a

Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications

A798 / A798M - 13

Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications

A807 / A807M - 13

Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications

A849 - 10Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe

Designation TitleA862 / A862M - 98(2014)

Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe

A926 - 03(2008)

Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated MetalPipe

A930 - 09Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

A964 / A964M - 03(2011)

Standard Specification for Corrugated Steel Box Culverts

A978 / A978M - 08(2013)

Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications

A979 / A979M - 03(2009)

Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field

A998 / A998M - 12

Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications

A1042 / A1042M - 04(2009)

Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains

Editorial

Designation Title

A994 - 13

Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

E527 - 12

Standard Practice for Numbering Metals and Alloys in theUnified Numbering System (UNS)

Editorial and Terminology

Designation Title

A902 - 13b

Standard Terminology Relating to Metallic Coated Steel Products

Electrical

Designation TitleF1003 - 02(2012)e1

Standard Specification for Searchlights on Motor Lifeboats

F1014 - 02(2012)e1 Standard Specification for Flashlights on Vessels

F1134 - 12Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators

F1198 - 92(2012)e1 Standard Guide for Shipboard Fire Detection Systems

F1207M - 12Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric]

F1507 - 99(2011)

Standard Specification for Surge Suppressors for Shipboard Use

F1669M - 12 Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]

F1755M - 96(2012)e1

Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric]

F1835 - 97(2012)e1 Standard Guide for Cable Splicing Installations

F1836M - 09(2013)

Standard Specification for Stuffing Tubes, Nylon, andPacking Assemblies (Metric)

F1837M - 97(2012)e1

Standard Specification for Heat-Shrink Cable Entry Seals (Metric)

F1883 - 03(2013)

Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units

F2044 - 09(2013)

Standard Specification for Liquid Level Indicating Equipment, Electrical

F2045 - 00(2011)

Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular

Designation TitleGlass/Plastic

F2046 - 00(2011) Standard Specification for Tachometers, Various

F2070 - 00(2011)

Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic

F2071 - 00(2011)

Standard Specification for Switch, Position Proximity(Noncontact) or Limit (Mechanical Contact), Fiber-Optic

F2361 - 03(2013)

Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower

F2362 - 03(2013)

Standard Specification for Temperature Monitoring Equipment

Flat-Rolled and Wrought Stainless Steel

Designation TitleA176 - 99(2009)

Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip

A240 / A240M - 14

Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

A276 - 13a Standard Specification for Stainless Steel Bars andShapes

A313 / A313M - 13

Standard Specification for Stainless Steel Spring Wire

A314 - 13a Standard Specification for Stainless Steel Billets and Bars for Forging

A368 - 95a(2013)

Standard Specification for Stainless Steel Wire Strand

A478 - 97(2013)

Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire

A479 / A479M - 14

Standard Specification for Stainless Steel Bars andShapes for Use in Boilers and Other Pressure Vessels

A480 / A480M Standard Specification for General Requirements for

Designation Title

- 14a Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

A484 / A484M - 14

Standard Specification for General Requirements forStainless Steel Bars, Billets, and Forgings

A492 - 95(2013)

Standard Specification for Stainless Steel Rope Wire

A493 - 09(2013)

Standard Specification for Stainless Steel Wire andWire Rods for Cold Heading and Cold Forging

A555 / A555M - 05(2014)

Standard Specification for General Requirements forStainless Steel Wire and Wire Rods

A564 / A564M - 13

Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

A565 / A565M - 10

Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

A580 / A580M - 13b Standard Specification for Stainless Steel Wire

A581 / A581M - 95b(2014)

Standard Specification for Free-Machining StainlessSteel Wire and Wire Rods

A582 / A582M - 12e1

Standard Specification for Free-Machining StainlessSteel Bars

A638 / A638M - 10

Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

A666 - 10Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, andFlat Bar

A693 - 13Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

A705 / A705M - 13

Standard Specification for Age-Hardening Stainless Steel Forgings

A793 - 96(2014)

Standard Specification for Rolled Floor Plate, Stainless Steel

A887 - 89(2014)

Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application


Standard Specification for Free-Machining StainlessSteel Plate, Sheet, and Strip

A947M - 13 Standard Specification for Textured Stainless SteelSheet [Metric]

A959 - 11 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

A968 / A968M - 96(2014)

Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes forCorrosion and Heat-Resisting Service

A1010 / A1010M - 13

Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

A1028 - 03(2009)

Standard Specification for Stainless Steel Bars forCompressor and Turbine Airfoils

A1069 / A1069M - 11

Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes

General Requirements


Standard Specification for Letters and Numerals forShips

F956 - 91(2012)

Standard Specification for Bell, Cast, Sound Signalling

F957 - 91(2012) Standard Specification for Gong, Sound Signaling

F1097 - 91(2012)

Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting)

F1099M - 98(2011)

Standard Specification for Rat Guards, Ship's (Metric)

F1138 - 98(2014)

Standard Specification for Spray Shields for Mechanical Joints

F1145 - 05(2011)

Standard Specification for Turnbuckles, Swaged, Welded, Forged

F1166 - 07(2013)

Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities

F1179 - 88(2014)

Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs


Standard Specification for Anodes, Sacrificial ZincAlloy

F1270 - 97(2013)

Standard Practice for Preparing and Locating Emergency Muster Lists

F1297 - 90(2012)

Standard Guide for Location and Instruction Symbolsfor Evacuation and Lifesaving Equipment

F1312 - 90(2013)

Standard Specification for Brick, Insulating, High Temperature, Fire Clay

F1332 - 99(2011)

Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/ASTM SI 10)

F1337 - 10Standard Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities

F1347 - 91(2012)

Standard Specification for Manually Operated Fueling Hose Reels

F1348 / F1348M - 91(2013)

Standard Specification for Pneumatic Rotary Descaling Machines

F1546M - 96(2012)e1 Standard Specification for Fire Hose Nozzles

F1546 - 96(2012)e1 Standard Specification for Fire Hose Nozzles

F1547 - 09 Standard Guide for Listing Relevant Standards and Publications for Commercial Shipbuilding

F1808 - 03(2013)

Standard Guide for Weight Control Technical Requirements for Surface Ships

F1878 - 98(2009)

Standard Guide for Escort Vessel Evaluation and Selection

F1994 - 99(2011)

Standard Test Method for Shipboard Fixed Foam Firefighting Systems

F2016 - 00(2012)

Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings

F2039 - 00(2012)

Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program


Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders

F2876 - 10

Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packagesfor use in Hazardous Locations in Marine Applications

High Security Fences and Perimeter Barriers

Designation Title

F1712 - 11 Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications

F2611 - 11 Standard Guide for Design and Construction of Chain Link Security Fencing

F2780 - 09(2014)

Standard Guide for Design and Construction of ExpandedMetal Security Fences and Barriers

F2781 - 10 Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems

F2814 - 09Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes

Insulation/Processes

Designation Title

F683 - 10 Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery

F2087 - 13 Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick

F2154 - 13 Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced

F2168 - 13Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring

F2191 / F2191M - 13

Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn

F2877 / Standard Test Method for Shock Testing of

Designation Title

F2877M - 13e1 Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum

Machinery and Piping Systems

Designation TitleF681 - 82(2008) Standard Practice for Use of Branch Connections

F682 - 82a(2008)

Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings

F704 - 81(2009)

Standard Practice for Selecting Bolting Lengths forPiping System Flanged Joints

F707 / F707M - 94(2011) Standard Specification for Modular Gage Boards

F708 - 92(2008)

Standard Practice for Design and Installation of Rigid Pipe Hangers

F721 - 81(2008) Standard Specification for Gage Piping Assemblies

F722 - 82(2008)

Standard Specification for Welded Joints for Shipboard Piping Systems

F841 - 84(2011)

Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels

F856 - 97(2008)

Standard Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and Air Conditioning (HVAC)

F885 - 84(2011)

Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS ¼ to 2

F986 - 86(2008) Standard Specification for Suction Strainer Boxes

F992 - 86(2011) Standard Specification for Valve Label Plates

F993 - 86(2011) Standard Specification for Valve Locking Devices

F994 - 86(2011)

Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections

F998 - 12 Standard Specification for Centrifugal Pump, Shipboard Use

F1000 - 13 Standard Practice for Piping System Drawing Symbols

Designation Title

F1005 - 91(2013)

Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration

F1006 - 86(2008)

Standard Specification for Entrainment Separators for Use in Marine Piping Applications

F1007 - 86(2014)

Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application

F1020 - 86(2011)

Standard Specification for Line-Blind Valves for Marine Applications

F1030 - 86(2008) Standard Practice for Selection of Valve Operators

F1075 - 97(2008)

Standard Specification for Dehumidifier, Shipboard,Mechanically Refrigerated, Self-Contained

F1076 - 87(2010)

Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube

F1098 - 87(2010)

Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24

F1120 - 87(2010)

Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications

F1121 - 87(2010)

Standard Specification for International Shore Connections for Marine Fire Applications

F1122 - 04(2010)

Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)

F1123 - 87(2010)

Standard Specification for Non-Metallic Expansion Joints

F1139 - 88(2010) Standard Specification for Steam Traps and Drains

F1155 - 10 Standard Practice for Selection and Application of Piping System Materials

F1172 - 88(2010)

Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type

F1173 - 01(2012)

Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications

Designation Title

F1199 - 88(2010)

Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)

F1200 - 88(2010)

Standard Specification for Fabricated (Welded) PipeLine Strainers (Above 150 psig and 150°F)

F1201 - 88(2010)

Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F

F1245 - 89(2012)

Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard

F1271 - 90(2012)

Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications

F1273 - 91(2013)

Standard Specification for Tank Vent Flame Arresters

F1298 - 90(2012)

Standard Specification for Flexible, Expansion-TypeBall Joints for Marine Applications

F1311 - 90(2012)

Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges

F1330 - 91(2012)

Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe

F1333 - 91(2013)

Standard Specification for Construction of Fire andFoam Station Cabinets

F1338 - 91(2013)

Standard Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly

F1370 - 92(2011)

Standard Specification for Pressure-Reducing Valvesfor Water Systems, Shipboard

F1386 - 92(2010)

Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding

F1387 - 99(2012)

Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings

F1431 - 92(2010)

Standard Specification for Water Trap for Diesel Exhaust

F1433 - 97(2010)

Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner


Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications

F1508 - 96(2010)

Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services

F1510 - 07(2013)

Standard Specification for Rotary Positive Displacement Pumps, Ships Use

F1511 - 13 Standard Specification for Mechanical Seals for Shipboard Pump Applications

F1548 - 01(2012)

Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications

F1565 - 00(2013)

Standard Specification for Pressure-Reducing Valvesfor Steam Service

F1567 - 94(2013)

Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers

F1685 - 00(2013)

Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems

F1718 - 01(2013)

Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps

F1791 - 00(2013)

Standard Specification for Filters Used in Air or Nitrogen Systems

F1792 - 97(2010)

Standard Specification for Special Requirements forValves Used in Gaseous Oxygen Service

F1793 - 97(2010)

Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service

F1794 - 97(2010)

Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems

F1795 - 00(2013)

Standard Specification for Pressure-Reducing Valvesfor Air or Nitrogen Systems

F1985 - 99(2011)

Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves

F2014 - 00(2013)

Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications


Standard Specification for Lap Joint Flange Pipe End Applications

F2798 - 09 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications

F2934 - 12Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications

Marine Environmental Protection


Standard Guide for Selection of Shipboard Incinerators

F1323 - 08 Standard Specification for Shipboard IncineratorsF1799 - 97(2009)

Standard Guide for Shipboard Generated Waste Management Audits

F2283 - 12 Standard Specification for Shipboard Oil Pollution Abatement System

F2363 / F2363M- 12

Standard Specification for Sewage and Graywater Flow Through Treatment Systems

Mechanical and Chemical Testing and Processing Methods of Steel Products and Processes

Designation Title

A370 - 13 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

A751 - 14 Standard Test Methods, Practices, and Terminology forChemical Analysis of Steel Products

A991 / A991M - 10

Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

A1033 - 10Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy SteelPhase Transformations

A1058 - 12b Standard Test Methods for Mechanical Testing of SteelProducts—Metric

Methods of Corrosion Testing

Designation Title

A262 - 13 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

A380 / A380M - 13

Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

A763 - 93(2009)

Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

A923 - 14Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

A967 / A967M - 13

Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

A1084 - 13 Standard Test Method for Detecting Detrimental Phasesin Lean Duplex Austenitic/Ferritic Stainless Steels

Methods of Testing

Designation Title

A90 / A90M -13

Standard Test Method for Weight [Mass] of Coating onIron and Steel Articles with Zinc or Zinc-Alloy Coatings

A239 - 14Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles ,

A309 - 01(2012)

Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test

A428 / A428M- 10

Standard Test Method for Weight [Mass] of Coating onAluminum-Coated Iron or Steel Articles

A754 / A754M- 11

Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence

A1030 / A1030M - 11

Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products

A1073 / A1073M - 14

Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet


Standard Practice for Using Hand Calipers to Measurethe Width of Steel Sheet

Other Fence Systems and Components

Designation Title

F537 - 01(2007)

Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and RelatedMaterials

F2630 - 07 Standard Guide for Self-Closing/Self-Latching General-Purpose Gates

Outfitting and Deck Machinery


Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing

F765 - 93(2012)e1

Standard Specification for Wildcats, Ship Anchor Chain

F782 - 01(2012) Standard Specification for Doors, Furniture, Marine

F783 - 88(2013)

Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung

F821 / F821M - 01(2012)

Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine

F822 - 93(2010)

Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine

F823 - 93(2010)

Standard Specification for Desk, Log, Marine, Steel, with Cabinet

F824 - 93(2010)

Standard Specification for Tables, Mess, Marine, Steel

F825 - 93(2010)

Standard Specification for Drawers, Furniture, Marine, Steel

F826 - 94(2010)

Standard Specification for Tops, Furniture, Marine,Steel

F985 - Standard Specification for Panama Canal Pilot

Designation Title00(2012) PlatformF987 - 04(2010)

Standard Specification for Portable Intermediate Flush Deck Stanchion

F1018 - 87a(2010)

Standard Specification for Steel Emergency Gear Stowage Locker

F1019M - 00(2012)

Standard Specification for Steel Deck Gear Stowage Box [Metric]

F1068 - 90(2012)

Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use

F1069 - 87(2012)

Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use

F1070 - 87(2012)

Standard Specification for Doors, Non-Tight, for Marine Use

F1071 - 94(2012)

Standard Specification for Expanded-Metal Bulkhead Panels

F1072 - 94(2012) Standard Specification for Expanded-Metal Doors

F1073 - 87(2012)

Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use

F1074 - 87(2012) Standard Specification for Cleats, Welded Horn Type

F1085 - 10 Standard Specification for Mattress and Box Springsfor Use in Berths in Marine Vessels

F1092 - 04(2010)

Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems

F1106 - 87(2012)

Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)

F1142 - 98(2012)

Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight

F1143 - 98(2012)

Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight

F1144 - Standard Specification for Manhole Cover Assembly,

Designation Title98(2012) Bolted, Semi-Flush, Oiltight and Watertight, HingedF1196 - 00(2013)

Standard Specification for Sliding Watertight Door Assemblies

F1197 - 00(2012)

Standard Specification for Sliding Watertight Door Control Systems

F1244 - 08(2013) Standard Specification for Berths, Marine

F1309 - 98(2012)

Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations

F1331 - 91(2012)

Standard Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces

F1385 - 07(2012) Standard Practice for Platforms in Cargo Tanks

F3040 / F3040M - 13

Standard Test Method for Mechanical Static Load Testing of Non-Structural Marine Joiner Bulkheads

Rigid Polymer Fence Systems

Designation Title

F964 - 13 Standard Specification for Rigid Poly (Vinyl Chloride)(PVC) Exterior Profiles Used for Fencing and Railing

F1999 - 00(2006)

Standard Practice for Installation of Rigid Poly(VinylChloride) (PVC) Fence Systems

Sheet Specifications


Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

A459 - 08(2013)

Standard Specification for Zinc-Coated Flat Steel Armoring Tape

A463 / A463M- 10

Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

A653 / A653M- 13

Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed)by the Hot-Dip Process

Designation Title

A755 / A755M- 11

Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

A792 / A792M- 10

Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

A875 / A875M- 13

Standard Specification for Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process

A879 / A879M- 12

Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

A917 - 08

Standard Specification for Steel Sheet, Coated by theElectrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)

A918 - 06(2011)

Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

A924 / A924M- 13

Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

A929 / A929M- 01(2013)

Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe

A1003 / A1003M - 13b

Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

A1004 / A1004M - 99(2014)

Standard Practice for Establishing Conformance to theMinimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members

A1046 / A1046M - 14

Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process

A1057 / Standard Specification for Steel, Structural Tubing,

Designation TitleA1057M - 08(2014)

Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized)by the Hot-Dip Process

A1063 / A1063M - 11a

Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process

A1079 - 13e2

Standard Specification for Steel Sheet, Complex Phase(CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

Specific Applications

Designation Title

F969 - 11 Standard Practice for Construction of Chain-Link Tennis Court Fence

F1908 - 08(2013)

Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas

F2000 - 10 Standard Guide for Fences for Baseball and Softball Fields

F2049 - 11Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas

F2200 - 13e1

Standard Specification for Automated Vehicular Gate Construction

F2409 - 10 Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas

F2631 - 07Standard Practice for Installation of Chain-Link Fencefor Outdoor Sports Fields, Sports Courts and Other Recreation Facilities

F2698 - 08(2013)

Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities

F2699 - 08(2013)

Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas

Stainless and Alloy Steel Tubular Products


Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

A213 / A213M - 14

Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

A249 / A249M - 14

Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

A250 / A250M - 05(2009)

Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes

A268 / A268M - 10

Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing forGeneral Service

A269 / A269M - 14e1

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

A270 / A270M - 14

Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing

A312 / A312M - 14

Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

A333 / A333M - 13

Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

A334 / A334M - 04a(2010)

Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

A335 / A335M - 11

Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

A358 / A358M - 14a

Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe forHigh-Temperature Service and General Applications

A369 / A369M - 11

Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service


Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service

A409 / A409M - 13

Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

A511 / A511M - 12

Standard Specification for Seamless Stainless SteelMechanical Tubing

A554 - 13 Standard Specification for Welded Stainless Steel Mechanical Tubing

A632 - 04(2009)

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

A688 / A688M - 12

Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes

A778 - 01(2009)e1

Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

A789 / A789M - 13ae1

Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

A790 / A790M - 14

Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

A803 / A803M - 12

Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes

A813 / A813M - 09

Standard Specification for Single- or Double-WeldedAustenitic Stainless Steel Pipe

A814 / A814M - 08

Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

A908 - 03(2013)

Standard Specification for Stainless Steel Needle Tubing

A928 / A928M - 13

Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal

A943 / A943M - 01(2014)

Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

A949 / A949M - 01(2014)

Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe


Standard Specification for General Requirements forAlloy and Stainless Steel Pipe

A1012 - 10

Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins

A1015 - 01(2014)

Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications

A1016 / A1016M - 14

Standard Specification for General Requirements forFerritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

A1047 / A1047M - 05(2014)

Standard Test Method for Pneumatic Leak Testing of Tubing

A1053 / A1053M - 12e1

Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe

Steel Chain

Designation TitleA391 / A391M -07(2012)

Standard Specification for Grade 80 Alloy Steel Chain

A413 / A413M -07(2012) Standard Specification for Carbon Steel Chain

A466 / A466M -07(2012) Standard Specification for Weldless Chain

A467 / A467M -07(2012) Standard Specification for Machine and Coil Chain

A906 / A906M -02(2010)

Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting

A952 / A952M -02(2010)

Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links

A973 / A973M -07(2012)

Standard Specification for Grade 100 Alloy Steel Chain

Steel Forgings and Billets


Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

A275 / A275M - 08(2013)

Standard Practice for Magnetic Particle Examinationof Steel Forgings

A288 - 91(2013)

Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

A289 / A289M - 97(2013)

Standard Specification for Alloy Steel Forgings forNonmagnetic Retaining Rings for Generators

A290 / A290M - 05(2010)

Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

A291 / A291M - 05(2010)

Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

A336 / A336M - 10a

Standard Specification for Alloy Steel Forgings forPressure and High-Temperature Parts

A372 / A372M - 13

Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

A388 / A388M - 11

Standard Practice for Ultrasonic Examination of Steel Forgings

A418 / A418M - 10

Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings

A427 / A427M - 10

Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction

A456 / A456M - 08(2013)

Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings

A469 / A469M - 07(2012)

Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

A470 / A470M - 05(2010)

Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

A471 / A471M - 09

Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

A472 / A472M - 07(2012)

Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings

A473 - 13 Standard Specification for Stainless Steel Forgings


Standard Specification for Ultrasonic Examination of Forged Crankshafts

A504 / A504M - 08(2013)

Standard Specification for Wrought Carbon Steel Wheels

A508 / A508M - 14

Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

A521 / A521M - 06(2011)

Standard Specification for Steel, Closed-ImpressionDie Forgings for General Industrial Use

A531 / A531M - 13

Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings

A541 / A541M - 05(2010)

Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure VesselComponents

A551 / A551M - 08(2013)

Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

A579 / A579M - 04a(2009)

Standard Specification for Superstrength Alloy Steel Forgings

A592 / A592M - 10

Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels

A604 / A604M - 07(2012)

Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

A646 / A646M - 06(2011)

Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and AerospaceForgings

A649 / A649M - 10

Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

A668 / A668M - 13e1

Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

A711 / A711M - 07(2012) Standard Specification for Steel Forging Stock

A723 / A723M - 10

Standard Specification for Alloy Steel Forgings forHigh-Strength Pressure Component Application

A729 / A729M - 09e1

Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway

Designation TitleService

A745 / A745M - 12

Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings

A765 / A765M - 07(2012)

Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings withMandatory Toughness Requirements

A768 / A768M - 05(2010)

Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts

A788 / A788M - 13

Standard Specification for Steel Forgings, General Requirements

A833 - 08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

A837 / A837M - 06(2011)

Standard Specification for Steel Forgings, Alloy, for Carburizing Applications

A859 / A859M - 04(2009)

Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

A891 / A891M - 10

Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

A909 / A909M - 06(2011)

Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

A939 / A939M - 12

Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings

A940 / A940M - 06(2011)

Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors

A956 - 12 Standard Test Method for Leeb Hardness Testing of Steel Products

A965 / A965M - 14

Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

A966 / A966M - 08(2012)

Standard Practice for Magnetic Particle Examinationof Steel Forgings Using Alternating Current

A982 / A982M - 10

Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils

A983 / A983M Standard Specification for Continuous Grain Flow

Designation Title

- 06(2011)e1 Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

A986 / A986M - 01(2011)

Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

A1021 / A1021M - 05(2010)

Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

A1038 - 13 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

A1048 / A1048M - 06(2011)

Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service

A1049 / A1049M - 10

Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

A1090 / A1090M - 14

Standard Specification for Forged Rings and HollowsProduced from Steels with Atmospheric Corrosion Resistance

Steel Forgings and Wrought Fittings for Piping Applications and Bolting Materials for Piping and Special Purpose Applications


Standard Specification for Carbon Steel Forgings for Piping Applications

A181 / A181M - 13

Standard Specification for Carbon Steel Forgings, forGeneral-Purpose Piping

A182 / A182M - 14a

Standard Specification for Forged or Rolled Alloy andStainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

A193 / A193M - 12b

Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

A194 / A194M - 14

Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature

Designation TitleService, or Both

A234 / A234M - 13e1

Standard Specification for Piping Fittings of WroughtCarbon Steel and Alloy Steel for Moderate and High Temperature Service

A320 / A320M - 14

Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

A350 / A350M - 13

Standard Specification for Carbon and Low-Alloy SteelForgings, Requiring Notch Toughness Testing for Piping Components

A403 / A403M - 13a

Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

A420 / A420M - 13

Standard Specification for Piping Fittings of WroughtCarbon Steel and Alloy Steel for Low-Temperature Service

A437 / A437M - 12

Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

A453 / A453M - 12

Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels

A522 / A522M - 13

Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service

A540 / A540M - 11

Standard Specification for Alloy-Steel Bolting for Special Applications

A694 / A694M - 13

Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

A707 / A707M - 13

Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service

A727 / A727M - 13

Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness

A758 / A758M - 13

Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

A774 / A774M - 13

Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

Designation Title

A815 / A815M - 13a

Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

A836 / A836M - 13

Standard Specification for Titanium-Stabilized CarbonSteel Forgings for Glass-Lined Piping and Pressure Vessel Service

A858 / A858M - 13

Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service

A860 / A860M - 13

Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings

A960 / A960M - 14

Standard Specification for Common Requirements for Wrought Steel Piping Fittings

A961 / A961M - 13

Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts forPiping Applications

A962 / A962M - 14

Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

A988 / A988M - 13

Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

A989 / A989M - 13

Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

A1014 / A1014M - 10

Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service

A1082 / A1082M - 12

Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications

Steel Plates for Boilers and Pressure Vessels

Designation TitleA20 / A20M -13

Standard Specification for General Requirements for Steel Plates for Pressure Vessels

A203 / A203M- 12

Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel


Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

A225 / A225M- 12

Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel

A263 - 12 Standard Specification for Stainless Chromium Steel-Clad Plate

A264 - 12 Standard Specification for Stainless Chromium-NickelSteel-Clad Plate

A265 - 12 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate

A285 / A285M- 12

Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

A299 / A299M- 09(2014)

Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon

A302 / A302M- 12

Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

A353 / A353M- 09(2014)

Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9% Nickel

A387 / A387M- 11

Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

A435 / A435M- 90(2012)

Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

A455 / A455M- 12a

Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese

A515 / A515M- 10

Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

A516 / A516M- 10

Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

A517 / A517M- 10

Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

A533 / A533M- 09(2014)

Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel


Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

A542 / A542M- 13

Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

A543 / A543M- 09(2014)

Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum

A553 / A553M- 10

Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel

A562 / A562M- 10

Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings

A577 / A577M- 90(2012)

Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates

A578 / A578M- 07(2012)

Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

A612 / A612M- 12

Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

A645 / A645M- 10

Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated

A662 / A662M- 12

Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

A724 / A724M- 09(2013)

Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels

A734 / A734M- 12

Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered

A735 / A735M- 12

Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service

Designation Title

A736 / A736M- 12

Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel

A737 / A737M- 09(2013)

Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel

A738 / A738M- 12a

Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

A770 / A770M- 03(2012)

Standard Specification for Through-Thickness TensionTesting of Steel Plates for Special Applications

A832 / A832M- 10

Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

A841 / A841M- 13

Standard Specification for Steel Plates for PressureVessels, Produced by Thermo-Mechanical Control Process (TMCP)

A844 / A844M- 09

Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process

A1017 / A1017M - 11

Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten

Steel Rails and Accessories

Designation Title

A1 - 00(2010) Standard Specification for Carbon Steel Tee Rails

A2 - 02(2014)

Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

A3 - 01(2012)

Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)

A49 - 12Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged CarbonSteel Compromise Joint Bars

A65 - 07(2013) Standard Specification for Steel Track Spikes

A66 - Standard Specification for Steel Screw Spikes

Designation Title

07(2013)A67 - 00(2010)

Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked

A183 - 03(2009)

Standard Specification for Carbon Steel Track Bolts and Nuts

A759 - 10 Standard Specification for Carbon Steel Crane Rails

Steel Reinforcement

Designation TitleA184 / A184M- 06(2011)

Standard Specification for Welded Deformed Steel BarMats for Concrete Reinforcement

A416 / A416M- 12a

Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

A421 / A421M- 10

Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

A615 / A615M- 14

Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

A648 - 12 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe

A704 / A704M- 06(2011)

Standard Specification for Welded Steel Plain Bar orRod Mats for Concrete Reinforcement

A706 / A706M- 14

Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

A722 / A722M- 12

Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete

A767 / A767M- 09

Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

A775 / A775M- 07b(2014)

Standard Specification for Epoxy-Coated Steel Reinforcing Bars

A779 / A779M- 12

Standard Specification for Steel Strand, Seven-Wire,Uncoated, Compacted for Prestressed Concrete

A820 / A820M- 11

Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

A821 / A821M- 10

Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

Designation Title

A881 / A881M- 10

Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties

A882 / A882M- 04a(2010)

Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand

A884 / A884M- 14

Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

A886 / A886M- 12

Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

A910 / A910M- 12

Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete

A911 / A911M- 11

Standard Specification for Uncoated, Stress-RelievedSteel Bars for Prestressed Concrete Ties

A933 / A933M- 14

Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement

A934 / A934M- 13

Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

A944 - 10Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

A951 / A951M- 11

Standard Specification for Steel Wire for Masonry Joint Reinforcement

A955 / A955M- 14

Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

A970 / A970M- 13a

Standard Specification for Headed Steel Bars for Concrete Reinforcement

A981 / A981M- 11

Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel PrestressingStrand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

A996 / A996M- 14

Standard Specification for Rail-Steel and Axle-SteelDeformed Bars for Concrete Reinforcement

A1022 / A1022M - 13

Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

A1032 - Standard Test Method for Hydrogen Embrittlement

Designation Title

04(2010) Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe

A1034 / A1034M - 10a

Standard Test Methods for Testing Mechanical Splicesfor Steel Reinforcing Bars

A1035 / A1035M - 14

Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

A1044 / A1044M - 05(2010)

Standard Specification for Steel Stud Assemblies forShear Reinforcement of Concrete

A1055 / A1055M - 10e1

Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

A1060 / A1060M - 14

Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed,for Concrete

A1061 / A1061M - 09

Standard Test Methods for Testing Multi-Wire Steel Strand

A1064 / A1064M - 13

Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

A1078 / A1078M - 12

Standard Specification for Epoxy-Coated Steel Dowelsfor Concrete Pavement

A1081 / A1081M - 12

Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand

Steel Rod and Wire


Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs

A228 / A228M -14

Standard Specification for Steel Wire, Music Spring Quality

A229 / A229M -12

Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs

A230 / A230M -05(2011)e1

Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality

Designation TitleA231 / A231M -10

Standard Specification for Chromium-Vanadium AlloySteel Spring Wire

A232 / A232M -05(2011)e1

Standard Specification for Chromium-Vanadium AlloySteel Valve Spring Quality Wire

A401 / A401M -10

Standard Specification for Steel Wire, Chromium-Silicon Alloy

A407 - 07(2013)

Standard Specification for Steel Wire, Cold-Drawn,for Coiled-Type Springs

A510 / A510M -13

Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel,and Alloy Steel

A679 / A679M -06(2012)

Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn

A713 - 04(2010)

Standard Specification for Steel Wire, High-CarbonSpring, for Heat-Treated Components

A853 - 04(2010)

Standard Specification for Steel Wire, Carbon, forGeneral Use

A877 / A877M -10e1

Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy ValveSpring Quality

A878 / A878M -05(2011)

Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

A899 - 91(2014)

Standard Specification for Steel Wire, Epoxy-Coated

A905 - 04(2010)

Standard Specification for Steel Wire, Pressure Vessel Winding

A931 - 08(2013)

Standard Test Method for Tension Testing of Wire Ropes and Strand

A938 - 07(2013) Standard Test Method for Torsion Testing of Wire

A1000 / A1000M- 11

Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

A1007 - 07 Standard Specification for Carbon Steel Wire for Wire Rope

A1023 / A1023M- 09e1

Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes

Steel Sheet and Strip

Designation Title

A109 / A109M - 14

Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

A414 / A414M - 14

Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels

A424 / A424M - 09a

Standard Specification for Steel, Sheet, for PorcelainEnameling

A505 - 12Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

A506 - 12 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

A507 - 12 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

A568 / A568M - 13ae1

Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

A606 / A606M - 09a

Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

A635 / A635M - 13

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-StrengthLow-Alloy with Improved Formability, General Requirements for

A659 / A659M - 12

Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

A684 / A684M - 12

Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

A749 / A749M - 08

Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

A794 / Standard Specification for Commercial Steel (CS),

Designation Title

A794M - 12 Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled

A805 / A805M - 09

Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled

A980 / A980M - 11

Standard Specification for Steel, Sheet, Carbon, UltraHigh Strength Cold Rolled

A1008 / A1008M - 13

Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, SolutionHardened, and Bake Hardenable

A1011 / A1011M - 14

Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

A1018 / A1018M - 10

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial,Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

A1031 / A1031M - 12

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled

A1039 / A1039M - 13

Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

A1083 / A1083M - 12

Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

A1088 - 13Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and TransformationInduced Plasticity (TRIP)

F1267 - 12 Standard Specification for Metal, Expanded, Steel

Structural Shapes and Hardware Specifications


Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

A143 / A143M - 07

Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement

A153 / A153M - 09

Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

A384 / A384M - 07(2013)

Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies

A385 / A385M - 11

Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)

A780 / A780M - 09

Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

A896 / A896M - 09(2014)

Standard Practice for Conducting Case Studies on Galvanized Structures

A1059 / A1059M - 08(2013)

Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products

A1068 - 10Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products

A1072 / A1072M - 11

Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products

A1074 - 11 Standard Specification for Hot Tin and Hot Tin/LeadDip on Ferrous and Non-Ferrous Metals

Structural Steel for Bridges, Buildings, Rolling Stock and Ships

Designation Title

A6 / A6M - 14

Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

A36 / A36M -12 Standard Specification for Carbon Structural Steel

A131 / A131M Standard Specification for Structural Steel for

Designation Title- 13 ShipsA242 / A242M- 13

Standard Specification for High-Strength Low-Alloy Structural Steel

A283 / A283M- 13

Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

A328 / A328M- 13a Standard Specification for Steel Sheet Piling

A514 / A514M- 14

Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

A529 / A529M- 05(2009)

Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

A572 / A572M- 13a

Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

A573 / A573M- 13

Standard Specification for Structural Carbon Steel Plates of Improved Toughness

A588 / A588M- 10

Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

A633 / A633M- 13

Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

A656 / A656M- 13

Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

A673 / A673M- 07(2012)

Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

A690 / A690M- 13a

Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Usein Marine Environments

A709 / A709M- 13a

Standard Specification for Structural Steel for Bridges

A710 / A710M- 02(2013)

Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates

A769 / A769M- 05(2010)

Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural

Designation TitleShapes

A786 / A786M- 05(2009)

Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

A827 / A827M- 14

Standard Specification for Plates, Carbon Steel, forForging and Similar Applications

A829 / A829M- 14

Standard Specification for Alloy Structural Steel Plates

A830 / A830M- 14

Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

A857 / A857M- 07(2013)

Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

A871 / A871M- 14

Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

A898 / A898M- 07(2012)

Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

A913 / A913M- 14a

Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)

A945 / A945M- 06(2011)

Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

A950 / A950M- 11

Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

A992 / A992M- 11 Standard Specification for Structural Steel Shapes

A1043 / A1043M - 05(2009)

Standard Specification for Structural Steel with LowYield to Tensile Ratio for Use in Buildings

A1066 / A1066M - 11

Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-MechanicalControlled Process (TMCP)

A1077 / A1077M - 12

Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use

Designation Titlein Buildings

Structures

Designation Title

F718 - 07(2011)e1

Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet

F940 - 99(2013)

Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint),Used in Marine Construction and Shipbuilding

F941 - 99(2013)

Standard Practice for Inspection of Marine Surface Preparation and Coating Application

F1130 - 99(2014)

Standard Practice for Inspecting the Coating System ofa Ship

F1178 - 11 Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture

F1321 - 14

Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel

F1455 - 92(2011)

Standard Guide for Selection of Structural Details forShip Construction

F2935 - 12 Standard Specification for Chocks, Panama, Mooring Cast Steel

F2936 - 12 Standard Specification for Chocks, Ship Mooring, Cast Steel

F2991 - 13 Standard Guide for Doubler Plate Repairs for Non-Classed Ship Structures

F3052 - 14

Standard Guide for Conducting Small Boat Stability Test (Deadweight Survey and Air Inclining Experiment) to Determine Lightcraft Weight and Centers of Gravity of a Small Craft

Terminology

Designation Title

A941 - 13b

Standard Terminology Relating to Steel, Stainless Steel,Related Alloys, and Ferroalloys

Tin Mill Products


Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet

A623 - 11 Standard Specification for Tin Mill Products, General Requirements

A623M - 11 Standard Specification for Tin Mill Products, General Requirements [Metric]

A624 / A624M -13

Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced

A625 / A625M -13

Standard Specification for Tin Mill Products, Black Plate, Single-Reduced

A626 / A626M -13

Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced

A630 - 03(2009)

Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate

A650 / A650M -13

Standard Specification for Tin Mill Products, Black Plate, Double Reduced

A657 / A657M -13

Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced

A987 / A987M -09

Standard Practice for Measuring Shape Characteristics of Tin Mill Products

Tool Steels


Standard Practice for Macroetch Testingof Tool Steel Bars

A597 - 87(2010)

Standard Specification for Cast Tool Steel

A600 - Standard Specification for Tool Steel

Designation Title92a(2010) High Speed

A681 - 08 Standard Specification for Tool Steels Alloy

A686 - 92(2010)

Standard Specification for Tool Steel, Carbon

Wire Specifications

Designation TitleA111 - 99a(2009)

Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire

A116 - 11 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric

A121 - 13 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

A363 - 03(2009)e1

Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand

A390 - 06(2011)

Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

A411 - 08(2013)

Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire

A460 - 11 Standard Specification for Copper-Clad Steel Wire Strand

A474 - 03(2013)

Standard Specification for Aluminum-Coated Steel WireStrand

A475 - 03(2009)e1

Standard Specification for Zinc-Coated Steel Wire Strand

A586 - 04a(2009)e1

Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

A603 - 98(2009)e1

Standard Specification for Zinc-Coated Steel Structural Wire Rope

A640 - 97(2009)e1

Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable

A641 / A641M- 09a

Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire

A740 - Standard Specification for Hardware Cloth (Woven or

Designation Title98(2014) Welded Galvanized Steel Wire Fabric)

A741 - 11e1 Standard Specification for Metallic-Coated Steel WireRope and Fittings for Highway Guardrail

A764 - 07(2012)

Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

A809 - 08(2013)

Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

A810 - 01(2009)e1

Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh

A817 - 12Standard Specification for Metallic-Coated Steel Wirefor Chain-Link Fence Fabric and Marcelled Tension Wire

A818 - 06(2010) Standard Specification for Coppered Carbon Steel Wire

A854 / A854M- 08(2013)

Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire

A855 / A855M- 03(2009)

Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand

A856 / A856M- 03(2009)

Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

A925 - 03(2009)e1

Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand

A974 - 97(2011)

Standard Specification for Welded Wire Fabric Gabionsand Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)

A975 - 11

Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

http://www.astm.org/Standards/steel-standards.html

Standar material

Documents

Transcript of Standar material