Smart ZigbeeWall Switch(EU)User Manual

Alexa TUTORIAL Google Home TUTORIAL

Installation Guide1. Installation

Separate the upper and lower parts from the switch by screwdriver.

See The Picture Blow

Dimension:3.4x3.4x1.7in

(Noted:Distinguish between each corresponding slot)

Attention: There are two types of wiring below, Without neutral wire is requiredand neutral wire is required.

2a. Prepare to install wiringAttention: Without neutral wire is required.

2a.1 LiveWire connects “L” terminal.2a.2Bulb Wire connects “L1, L2,L3” terminal.

1 gang connects “L1”Terminal.2 gang connects “L1, L2” terminal.3 gang connects “L1, L2, L3”terminal .

2b. Prepare to install wiringAttention: Neutral wire is required.

2b.1 Live Wire connects “L” terminal.2b.2 Bulb Wire connects “L1, L2,L3” terminal.2b.3 Neutral Wire connects “N” terminal (Attention: Neutral wire is required).

1 gang connects “L1”Terminal.2 gang connects “L1, L2” terminal.3 gang connects “L1, L2, L3”terminal.

N L L1 L2 L3

wiring Schematic

N

L

BulbNeutral wire is required

3. Fix the switch onto wall

3.1 Put the switch lower parts into switch box in the wall3.2 Mount the two side screws.3.3 Install the upper top case (install from up above)3.4 Cover the upper top case into switch.3.5 Turn on electricity, and then LED light will be flashed quickly for

pairing.

WIFI Indicator Light

ON/OFFButton

Indicator Light Status:1. The red light continuous brightness .-The switch is connected succeed with mobile phone APP.2. The red light blinking slowly.- The switch is not connected to the network.3. The red light flash continuously and quickly.- The switch is currently on the status of matching with mobile phone APP.4. The red light flash 1 time every 3 seconds .-The switch is into AP pairing Mode.

How to download App?Scan the QR code below or search Smart Life in IOS APP store or Google play

IOS & Android System

Setting Smart Life APPHow to Register and Login:1. Download or Scan the QR Code and install Smart Life App.2. Once Download or Scan the QR Code, the App will ask you to register yourdevice.

3. Enter your phone number or email which you prefer and select the countryyou live in.4. If phone numbers selected you will receive a text with a registration code, ifyou choose email you should create a password then.

5.Create family .6.Enter the family name and select the room.7.Family create sucessfully.

How does APP connect with smart gateway device fast?

1 . Open the application, click add device, click “on the wired gateway”, connectthe gateway device to the power supply, and connect to the home router.

2. Please reset gateway device,press the reset button for a long time until theindicator light (green light) is on continuously .3. First click “confirm indicator light is on”, Then Click on the smart gateway link,make sure the cellphone and gateway in the same network,so APP could connectwith the gateway device.4. Device added successfully,click completed.

Smart gateway and APP connection complete, how to connect to the switch?

1. Make sure the switch is electrified,Press any switch button for 5-8 second untilthe Wi-Fi red light flashes rapidly.2. After the smart Gateway is connected to the APP, click on the added subdevicefirst, and then click "The indicator light is flashing."

3. Device connecting automatically,then click device added successfully, Renamethe device and select the room then tap Completed(Attention: The name should use numeric and letters, don’t use special symbols)

4. Long press switch to edit switch name, (Attention: The name should usenumeric and letters, don’t use special symbols)