SAVE $5O ON ROCKLER'S ALL TERRAIN MOBILE BASE

Peel Here

SAVE $5O ON ROCKLER’S ALL TERRAIN MOBILE BASESteamroll over cords and rough surfaces with huge 5" urethane casters!

Since 1954 March 2018 Catalog 8P-A

Everyday with a $35+ Order

Email Subscribers E

njoy

001a_8P_SH.indd 1001a_8P_SH.indd 1 2/7/18 12:43 PM2/7/18 12:43 PM

02072018124450 Approved with warnings

FU

Forp

Powethree-box toCPI. Aremovscale stop f1/8" chip eRigid super

50797

DeW2-SwitPlu$17

SAVE $50 — Support up to 800 lbs. Transform almost any stationary tool into a portable workstation! Rockler® All-Terrain Mobile Base Huge 5" urethane casters steamroll over cracks, cords and uneven terrain, while a rugged 800-pound load capacity, kick-action wheel locks, and an expandable steel frame provide superior strength and versatility. The base adjusts from 18" x 18" to 28" x 28".

22672 . . . . . . . . . . . . . . . . .$ 219.99 $16999

Extension SetsExtension Set A replaces two original stretchers with a longer pair, extending the base-length to between 26" and 36". Extension Set B adds four stretchers to the original frame, pushing the overall base-length to between 36" and 50". 28774 Extension Set A . . . . . . . . . . . . . . . . . . . $ 22.99 28834 Extension Set B . . . . . . . . . . . . . . . . . . . $ 32.99

More product details on page 66

5" Casters roll over hoses and cords

Move over rough terrain

Huge 5" urethane casters steamroll over cracks, cords and more!

Sturdy steel base adjusts from 18” x 18”

to 28” x 28”

Front casters swivel freely for responsive steering capability

5 STAR PRODUCT!

DESIGNER'S NOTEBOOKThe thinking behind some of our innovations

Email subscribers enjoy FREE shipping every day on $35+ orders. Sign up at: rockler.com/emailAdditional shipping charges will apply for select oversized items, express orders, international orders and orders to Alaska, Hawaii, Guam, Puerto Rico and the Virgin Islands. This offer cannot be combined with other offers, applied to previous orders or used in conjunction with Rockler Professional pricing. Some offers available only online. Rockler Woodworking and Hardware reserves the right to limit quantities, correct errors or omissions and modify or end this promotion at any time. Not all items available at retail stores. Offer not valid at Rockler’s independent resellers. To shop now and get Free Shipping, use the 5 digit code that begins with 8P when checking out online, or when calling us with an order. This code is located in the mailing area, near your address on the back cover of the catalog. Offer valid through May 5, 2018.

See it in action online at rockler.com

Buy a March

A

AN

2 800-279-4441

Sale prices valid March 2 through March 29 , 2018

002-003 8P SH.indd 2002-003 8P SH.indd 2 1/31/18 1:44 PM1/31/18 1:44 PM


INTEGRATED MOBILE BASEIN

FREEUpgrade

On any new ProfessionalCabinet Saw

OVERARM DUST COLLECTION

OR

ONLY FOR ALIMITED TIME!

A $199 Value!USDBuy a new 3.0HP or 1.75HP Professional Cabinet Saw

March 1 – April 30, 2018, and we’ll offer you:

A FREE Overarm Dust Collection*

ORA FREE Integrated Mobile BaseNot compatible with the In-Line Router Table.

For mail-in rebate and more product information see:

rockler.com/sawstop*Overarm Dust Collection requires a DC Blade Guard,

which is included with the 3.0HP Professional Cabinet Saw but must be purchased for the 1.75HP model

Powerful 15 amp, 20,000 RPM motor, three-knife cutter head, and two-speed gear box to optimize cuts per inch at 96 or 179 CPI. Automatic carriage lock. Material removal gauge and extra-large thickness scale allow great control. Turret depth stop for frequently used thickness settings. 1/8" maximum depth of cut. Fan-assisted chip ejection vacuum. 6" depth capacity. Rigid 193/4" cast aluminum base offers superior stability.

50797 . . . . . . . . . . . . . . . . $ 829.98 $64999

Laguna C|Flux 1.5HP 1-Micron Cyclone Dust Collector Pleated filter traps 99.97% of particles from 0.2 to 2 microns. Includes high-frequency remote control 1.5HP 110v motor. Delivers up to 1,314 CFM .

58832 $ 1,199.00 $107910

Laguna P|Flux HEPA Cyclone Dust Collectors HEPA filter removes 99.2% of particles down to .4 microns. Includes high-frequency remote control. 3HP, 220v motor delivers up to 2,817 CFM

55924 $ 2,499.00 $224910

Shop ALL monthly deals at rockler.com/promotions

p ALL monththly deal

DeWalt® DW735x 13" 2-Speed Planer with Knives & Table, Plus FREE Stand — $179 Value!

up

ords ad ble ty.

999

ith en to

h to

22.99 32.99

66

rs

d

Rico onal and

order.

SuperMax 19-38 Drum Sander SuperMax 19-38 churns out flat, smooth surfaces with unwavering consistency, giving you the benefits of a wide-belt sander at a price that won't break the bank. Offers 19" width sanding in a single pass and 38" in a double pass. Includes open stand. Min. workpiece length: 21/4". Max. workpiece thickness: 4". Min. workpiece thickness: 1/32". 40"L x 24"W x 24"H. 13/4 HP. 110V, 20A. 44188 . . . . . . . . . . .$ 1,399.00

$125910

Folding Infeed/Outfeed Tables for SuperMax 19-38 Additional support for reduced tipping on long material.

56020 . . . .$ 129.00 $11610

3" Diameter Casters Foot-brake locks both wheel and swivel for stable stationary setups. 240 lb. capacity per caster. Sold in pairs. Stem mount.

25985 . . . . . $ 29.99 $2499

pr.

Buy a new 3.0HP or 1.75HP Professional Cabinet Saw March 1 – April 30, 2018, and we’ll offer you:

A FREE Overarm Dust Collection*

ORA FREE Integrated Mobile BaseNot compatible with the In-Line Router Table.

SuperMax 16-32 Drum Sander 58666 16-32 Drum Sander . . . . . . . . . . . . . . . . . .$ 1,199.00

$107910

55450 Folding Infeed/Outfeed Tables . . . . . . . . . . . . .$ 119.00 $10710

3rockler.com


Smaller Size



COMING SOON!

PREORDER ONLINE AT: rockler.com/prolift

New Rockler Pro Lift router lift features innovative technology that solves two common router lift problems: Slow, tedious bit-height adjustments and hard-to-swap insert rings that require screws and hex wrenchesStock #52429

Rikon 80-805 8'' Slow-Speed Bench Grinder Low speed of 1,750 RPM helps prevent tools from overheating as you sharpen. 60-grit and 120-grit wheels let you go quickly from rough grinding and shaping to final sharpening. Cast iron base and rubber feet for reduced vibration. Dual tool rests, spark arrestors and adjustable eye shields. Left-hand tool rest has a V-groove for sharpening drill bits. Includes diamond wheel dresser.

58541 Grinder . . . . . . . . . . . . .$ 139.99 $9999

55356 Stand . . . . . . . . . . . . . . . .$ 79.99 $6999

ONLINE VIDEO!

Many more power tools at rockler.com/power-tools

Triton TCMPL 23/8" Compact Palm Planer Lightweight, compact planer is ideal for light tasks like chamfers or dressing the edge of a board. 23/8" planing width. Removes up to 1/16" in one pass. 3 beveling grooves in front shoe. Rubber over-molded grip increases control and safety. With dust port.

55305 . . . . . . . . . . . . . . . . . . . . . . .$ 79.99 $7199

Makita PJ7000 Plate Joiner Easy set-up and a powerful 5.6-amp motor for producing strong, accurate biscuit joints. 11,000 RPM for quick cutting in a variety of woods. Rack-and-pinion vertical fence adjustments with pivot stops at 0°, 45°, and 90°. Six depth settings with stops for biscuit sizes #0, #10 and #20. Non-marring rubber inserts on the shoe help prevent slipping. Large top-mounted handle for control. 55001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 179.00

Porter-Cable® 382 5" Random Orbit Sander Flawless finish with less effort. 1.9 amp motor delivers 12,000 orbits per minute. Controlled Finishing System regulates pad speed while minimizing gouging at startup. Includes a dust collection bag and accepts 1" and 11/2" vacuum hoses. Carrying case.

42272 . . . . . . . . . . . . . . . . . . . . . .$ 49.99 $4299

LasePira Easy-or Shof crephotoMade 59803

It

BuyEng

Ext

FreuFineRout Two T1/32"detailpurpoSpiralfor dework.55315

FreuCNC 51594

58541

55356 Arbortech Mini Turbo Kit with FREE Porter-Cable 41/2" Angle Grinder Freehand carve, shape and sand a huge variety of projects—includes 41/2" PCE810 angle grinder! Compact 2" blade reaches into tight spaces. Cut with face of blade to plane flat; cut with edge to sculpt. Perimeter acts as a rub bushing for template work. Includes 21/2" extension for deep hollowing, plus sanding discs for final shaping and smoothing. Teeth are rotatable and replaceable. 8mm (5/16") tooth diameter.

56011 . . . . . . . . . . . . . . . . . $ 179.98 $12900

Bosch® 21/4 HP VS Router 90945 . . . . . . . . . . . . . . . . . $ 169.00

$14900

Bosch Router Combo Package 21/4 HP, 12 amp 1617EVS motor with plunge and fixed bases. Variable speed motor (8,000-25,000 RPM) offers microfine depth adjustment, soft-start and overload protection. Includes 1/4”and 1/2” collets and carrying case.

62716 . . . . . . . . . . . . . . . . . $ 219.00 $19900

Porter Cable Restorer with Paint and Rust Remover Drum Accepts a range of optional accessories to sand, grind and polish—includes 6-pack of sanding sleeves and a Paint and Rust Remover Drum. Lighter and more compact than a belt sander; smoother finish than an angle grinder. Pistol grip for one-handed use; front palm grip for working vertically or overhead. Accepts wide range of quick-change roller sleeves and wheels. Integral dust port. 3.5A variable-speed motor.

55507 . . . . . . . . . . . . . . . . . . . . .$ 119.96 $9997

CNCII wiFREEEngr A CNpackagantrInterlDesktbit andraw

5423

4 800-279-4441


004-005 8P JK.indd 4004-005 8P JK.indd 4 2/1/18 9:39 AM2/1/18 9:39 AM

02012018094143

RPM pinion 45°, sizes he ndle

79.00

Laser Engraving Module for CNC Piranha and Shark HD3 Easy-to-attach module converts your CNC Piranha or Shark HD3 into a Laser Engraver capable of creating intricate drawings, lettering and photographic images. Includes safety glasses. Made in USA. 59803 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 499.99

Items with a star ★ are oversize packages and special charges apply. Please ask for specific shipping charges when placing your order.

Buy any CNC Shark and get a FREE Laser Engraving Module ... $499 value!

Get the Carvewright CX_3D CNC System with FREE Dust Hood ... $49 value!

Router not included

With the Rockler Protection Plan, you'll get accidental damage coverage immediately upon purchase of your tool. Plus, we will extend the manufacturer's warranty for your choice of an additional 1 or 2 years. We'll take care of all parts and labor for any repairs, with no deductibles and no hassles. If your tool can not be repaired, we'll gladly replace it. Learn more at: rockler.com/rockler-protection-plan

dPcphi

Extra protection for your tools from day one!Buy Now, Pay Later with BlispayLEARN MORE AND APPLY NOW ATBLISPAY.COM/ROCKLER

Freud 87-408 3-Piece Lettering/Signmaking CNC Router Bit Set Round Nose Bit for fluting and decorative veining in signs, moldings and millwork. Dish Carving Bit is ideal for trays, coasters, and raised lettering. V-Groove Bit for engraving and lettering. 50659 1/4" Shank . . . . . . .NEW $ 54.97

Freud 87-308 3-Piece Fine Detail CNC Router Bit Set Two Tapered Ball Tip bits—1/32" and 1/16"—for ultra-detailed cuts and general-purpose carving. 1/4" Up Cut Spiral Ball Nose Bit is ideal for deep grooving and edge work. All bits are solid carbide. 55315 1/4" Shank . . . . . . .NEW $99.97

Freud 8-Piece General-Purpose CNC Router Bit Set 51594 87-208, 1/4" Shank . . . $ 149.97

Freud 8-Piece Signmaking CNC Router Bit Set

57926 87-108, 1/4" Shank . . . $ 199.97

900

fixed offers

ad ying

900

ter nish use;

and otor.

997

CNC Shark HD4 with FREE Laser Engraving Module Package includes a Laser Module capable of creating intricate drawings, lettering and photographic images! Upgraded electronics controller with color touch-screen pendant controller and additional expansion ports. Features larger linear guides, auto edge sensing, auto center locating, rotational sensing and XY homing capability. Includes Virtual Zero software, which maps the surface of your workpiece for maximum accuracy. Built with a reinforced gantry to handle larger-sized routers such as the PC 890 series. Adjustable bearings. XYZ travel: 25" x 25" x 7".

★ 53316 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4,499.98 $3,99999

CNC Shark II with FREE Laser Engraving Module A CNC router and laser engraver in one package! Heavy-duty router mount and gantry can handle up to 21/4 HP routers. Interlocking table for fast, flexible clamping. Increased Z-travel of 7". Includes Vcarve Desktop software, CNC Shark control software with Virtual Zero, V-groove router bit and two hold-downs. XYZ travel: 13" x 25" x 7". Laser is capable of intricate drawings, lettering and photographic images. Includes safety glasses.

54235 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3,499.98 $2,99999

CarveWright CX - 3D CNC System with Dust Hood Unique conveyor drive lets you carve workpieces up to 12' in length on a very compact machine. Onboard computer eliminates need for a separate computer in your shop, while the integral spindle means no need to buy a router. Revolutionary drag and drop software makes designing simple. Includes dust hood, 1/16" bit, software package, spindle system, memory card, programmer and instructional DVD. Capacity: 141/2"W x 12'L x 51/2" thick.

58494 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 1,949.98 $1,82999

CNC Shark HD4 Extended Bed with FREE Laser Engraving Module Same functionality and components as the CNC Shark HD4, but with an extended bed featuring a whopping 50" of Y-axis capacity—the largest of any Shark to date.

★ 54980 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 5,499.98 $4,99999

5rockler.com


Router not included

004-005 8P JK.indd 5004-005 8P JK.indd 5 2/7/18 4:10 PM2/7/18 4:10 PM

02072018161114

Rockler® Vacuum Clamp Pod Kit Secures workpiece from bottom side, eliminating need for traditional clamps that obstruct sanding, routing and planing. Works on nearly any workpiece with one flat face at least 4" square. Ideal for CNC projects, routed signs, carvings and more. Includes two pods, 8' of hose, fold-down knobs with T-bolts that slide into your T-tracks, and brackets for screwing pods to a workbench. Securing pods requires pump that creates suction of at least 25" Hg such as the Rockler Vacuum Pump (57519) sold separately. 53418 Vacuum Clamp Pods, 2-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 59.99 51231 4-Pack Replacement Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 4.99 58991 8' of Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 4.99

Powerful clamping – connect up to four pods!

Rockler® Vacuum Pump Portable pump works with Rockler Vacuum Clamp Pods (53418, sold separately) helps to secure your workpiece from the bottom side, with no clamp arms to get in the way. Pump generates suction of 25.5 in-Hg, enough to connect up to four Rockler Vacuum Clamp Pods. Includes vacuum pump, 8' of hose and seven various brass fittings for connection to your vacuum clamping system. 57519 . . . . . . . . . . . . . . . . . . . . . $ 399.99

57519

53418

Rockler® Auto-Adjust Jig Clamps Just squeeze the clamp and it auto-adjusts for stock thickness—large, no-mar clamp pads are ideal for aligning face frame parts. Turn the thumbscrew to set clamping pressure; once set, it stays the same for all material thicknesses. Use as face clamps for assembling pocket hole face frames or for general workholding and assembly. Heavy-duty all-metal construction with comfortable rubberized grips. 4" Throat Depth; 3" Jaw Opening 57749 . . . . . . . . . . . . . . . . . . . . . . $ 27.99 6" Throat Depth; 41/2" Jaw Opening 57987 . . . . . . . . . . . . . . . . . . . . . . $ 34.99

Rock Turn aa top/The joseamCreatand skeepsLong joint hplywoprofileAlso nwith f 54799

Zeru Proterust fovapor45"W

55324

Wix Read secursetup

57097

Pro

Rockler® Bandy ClampsOne easy squeeze is all it takes to clamp a wide variety of profiles, hold cords and hoses out of your way! Sold in pairs.

54141 Large . . . . $ 24.99 $1499

6" Wooden Handscrew Clamps Classic design lets you offset and/or angle jaws to keep parts from shifting. Solid steel clamping elements with hardwood jaws and handles. Maximum jaw opening: 31/8".

53782 6" . . . . . . . $ 12.99 $649

ea.

50" All-in-One Clamp Guide Wide handles and a click-lock sliding jaw make it simple to set these clamps for use as an edge guide for circular saws and routers.

32777 . .$ 45.99 $2999

ea.

Product details on page 50


Sure-Foot® Aluminum Bar Clamps Extra wide 21/2" foot for exceptional stability and a higher base for handle clearance.

41816 48" . . .$ 44.99 $2999

ea.

Irwin Parallel Clamps Ideal for clamping casework and drawers, the clamps have handles that double as a clutch - just pull up to disengage. The bars are serration-free, so jaws slide smoothly and dried glue flakes off easily. Non-marring, 2" wide jaws. Removable foot for use as a spreader. 33/4" throat depth. Up to 1150 lbs. clamping pressure.

35171 24" . . . . . $ 39.99 $2999

39922 48" . . . . . .$ 47.99 $3799


6 800-279-4441


006-007 8P SH.indd 6006-007 8P SH.indd 6 1/29/18 11:43 AM1/29/18 11:43 AM

01292018114604

kpiece

ates nect

ods. nd ection

99.99

519

ning ew to ays .

al uty ble

g 27.99 ng

34.99

Rockler® Miter Fold Dado Set Turn a flat sheet of wood into a four sided box including a top/bottom with just four cuts on the table saw. The joints are folded closed, hinging on the veneer for seamless corners and beautiful flow-through grain. Create casework, boxes and drawers with minimal tools and setup. Doubles as an 8" dado set. Locking profile keeps miters from sliding under clamping pressure. Long joint line for greater strength. Rabbet at inside of joint helps reduce risk of glue squeeze-out. Works with plywood or hardwood from 1/4" to 3/4" thick. Specially profiled blade compatible with included dado set only. Also not compatible with SawStop or any other saws with flesh-detection technology. 54799 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 349.99

The Miter Fold Dado Set also serves as a complete 8" dado set and includes a variety of chipper blades up to 1/4" thick

Make continuous grain boxes with seamless joints!


Fold

Fold the sides upright to create seamless joints and preserve the grain pattern

Clamp to complete the box. Simply glue and clamp.

ClampCut

Cut with dado set, remove corners and score the edges.

Rockler 4-Piece Safety Kit S Shop safety essentials. Each piece is designed with ergonomics and convenience in mind.

51369 . . . . . . . . . .$ 29.99 $2499


Rockler® Table Saw Small Parts Sled Cut small parts to length on your table saw—great for dowels, tenon stock and small moldings.

55916 . . . . . . . . . .$ 74.99 $6499


Mini Digital Height Gauge Measure accurately and instantly to within a thousandth of an inch! Magnetic feet allow it to self stand.

43937 . . . . . . . . . . $ 24.99 $1999

Zerust® No Rust Table Saw Cover Protects large stationary power tools from rust for up to five years! Emits non-toxic vapor corrosion inhibitors. 45"W x 63"L x 19"H.

55324 . . . . . . . . . $ 59.99 $3999

Wixey Digital Angle Gauge Read precise angles in seconds! Magnets secure the gauge to saw blades for angle setups with 0.1º resolution.

57097 . . . . . . . . . .$ 29.99 $1999


Cove Cutting Table Saw Jig Custom coves have never been easier! This jig accepts stock up to 7” wide and 11/2” thick, so you can cut huge crown moldings that would otherwise cost a fortune.

22395 $ 89.99 $6999


GlideCote Table and tool surface sealant. Regular maintenance of saw and receiving tables. Reduces sliding friction. 10 3/4 oz. 97594 . . . . . .$ 22.99

$1999

7rockler.com



01292018163529

Tu

Pro

RockDuty Flips fball bdirect283/4" 43399

Tilt up and roll through doorwaysMove sheet stockMobile work station h doorways

Industrial strength! Rockler® Material Mate hauls large panels and doubles as a sturdy shop stand!

Rockler® Material Mate Panel Cart and Shop Stand Smoothly roll sheet stock from your truck or storage rack to your saw, or add a solid top to convert it into a mobile workstation! Tilting action allows convenient loading if you store your sheet stock on edge, and allows passage through a service door as narrow as 30". In the upright position, you can unload sheets directly off the bed of your truck. Smooth rolling 4" casters (two have locks). Rigid steel frame. Bottom frame is 251/4" W x 36"L. Top frame adjusts from 22" to 301/4" x 36". Height adjusts from 32" to 37" with top horizontal. 56889 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 249.99

ONLINE VIDEO!

GVS Elipse P100 Half Mask Respirators Compact, comfortable, breathable mask protects against dust particles, metal fumes, mists, and vapors. Low-profile filters permit a wide field of view, and won't interfere with safety glasses, shields or hoods. Lightweight TPR facepiece adapts to the contours of your face. Central valve for low breathing resistance and less moisture build-up. NIOSH approved. Replacement filters available at rockler.com, or upgrade to the odor filters, which have an added carbon element. 59101 Small/Medium Mask . . . $ 24.99 58759 Medium/Large Mask . . . $ 24.99

Rock Don'ta cleaa 5/1cente 5712

12-G 12-gafor hereel mattachlength

20323

Pro

Rockler® Cross-Back Shop Apron Generous cut with spacious pockets. Comfortable straps shift weight from your neck to your shoulders.

53853 . . . . . . . . $ 29.99 $2499


Rockler® Shop Block Tool and Parts Tray Includes two half-hexagons that can be wall-mounted separately or joined with the dovetail tracks to make a fully hexagonal unit. Four compartments with densely packed bristles hold pencils, screwdrivers, drill bits and jigsaw blades neatly upright. Six open trays keep hardware easily accessible.

51619 2-Pack . . .$ 24.99 $1998

High Carbon Steel Forstner BitsCut clean, precise flat-bottom holes without tear-out. 3/8" Shank. 16-Pc. Set

69069 . . . . . $ 99.99 $6999

set


3" Swivel Casters Two casters swivel and brake, while the other two are fixed for straight tracking. 35/8" H. Load Rating: 150 lbs. Set of 4.

59504 . . . . . . . . . . $ 19.99 $999

set

Rockler® Workbench Caster Set Maneuver your heavy work bench with ease! Easy-spin 23/8" urethane casters feature a foot-activated lift mechanism that engages or disengages with the touch of your toe. Rated at 100 lbs each caster. Set of four.

43501 . . .$ 79.99 $5999

set


Two shown joined

FREE downloadable plan – Material Mate

Storage Cabinet at:rockler.com/free-plans

8 800-279-4441



01302018144835

Remove roller stand top

Replace with outfeed table

Roller Stand Base not

included with 57559

Turn your Roller Stand into a heavy-duty Outfeed Table

Outfeed Table Attachment Kit for Rockler® Heavy-Duty Stand Provides exceptional support for cutting large materials—doubles as a work table. Pull the pin and it folds flat for compact storage or transport. Attachment requires the base of our Heavy-Duty Roller Stands (#43399 and #69201, sold separately), which also folds up. Aluminum ramp helps your stock transition from the saw to the outfeed table. Wedge-shaped steel post for controlled height adjustments without slamming down. Height range: 291/4" - 411/2" (with 3/4" top; top not included). Recommended top size: 24"W x 48"L. 57559 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 59.99 Product details on page 57

Rockler® Heavy-Duty Flip-Top Roller Stand Flips from a 23/8" bearing roller to eight ball bearings for movement in any direction. Height adjusts easily from 283/4" to 47". 43399 . . . . . . . . . . . . . . . . . . . . . . $ 99.99

Aluminum Ramp

Aluminum Ramp

ask e d hields

tance

ble at filters, t.

24.99 24.99

Rockler® T-Track Corner Stop Cradles the corner of your workpiece for stability and a 90° reference. Ideal for pocket joint assembly. Can be configured for right- or left-handed corner. Recess at inside corner provides bit clearance when zeroing your CNC, and prevents sawdust from accumulating. 5/8" fence height and fold-down knobs allow clearance for belt sanding, hand planing, scraping dried glue and CNC routing. Fits any track that accepts 5/16" T-bolts and can accommodate the 3/8" keyway, including our T-Track Table (#46654, sold separately). 58673 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 27.99

Rockler® T-Track Accessory Storage Rack Don't dig through a dusty drawer for your T-track accessories—hang them up for a clear view and easy access. 18" rail has 17 slots to accept any accessory with a 5/16" T-bolt. Pre-drilled to mount to your workbench or to studs at 16" on center. Galvanized steel to prevent corrosion. 57122 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 15.99

Rockler® Router Bit Storage Inserts Holds shanks snugly enough that they won't fall out when stored on the wall. Each insert is stepped to hold both 1/4" and 1/2" shanks, providing flexibility when you need to rearrange. Neat, clean and easily customized—just drill as many 5/8" holes as you need and push in the inserts. 57223 10-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.99

Saw Blade/Router Bit Cleaning Kit Jumbo-sized blade bath features raised inner ring, preventing blades suctioning to the bottom. 14" inside diameter accepts 12" blade. Tight-fitting lid lets you store for re-use.

34895 . . . . . . . . . .$ 27.99 $1999

12-Gauge 30' Electric Cable Reel 12-gauge cord gives you plenty of power for heavy tools and motors! Spring-loaded reel mounts to a wall or ceiling with attached bracket. 30' cord locks at any length. Cord includes three receptacles.

20323 . . . . . . . . . .$ 99.99 $7999

Product details on page 67 Product details on page 54

the ng. 4.

9set

able Matet at:comlans

T-Track Table and more accessories on page 40

9rockler.com



01292018134437

LS Pos

5

P

BUILD:

BUILD IT WITH END TABLEROCKLER

Turning Blanks, 2" x 2" x 36" Blanks are rough sawn and may contain some sapwood. Dimensions are nominal. 57045 Poplar . . . . . . . . . . . . $ 10.99 48706 Cherry . . . . . . . . . . . . $ 14.99

PLAN Download a FREE PLAN $9.99 VALUE rockler.com/build

VIDEOSee FREE Skill Builder Videos online at rockler.com/build

Joining Wood with BeadlockHow to cut Straight Edges and Tapers with the Tapering Jig

SAVE 10%%

Table Top FastenersSturdy connection between tabletop and apron. Allows room for wood movement. 34215 . . . . . . . . . . . . . . . . . . . . . . . . . $ 2.99

See General Finishes Chalk Paint and Stains online at

rockler.com/finishing

58053 Pint . . . .$ 17.99 $1619

53869 Quart . . .$ 27.99 $2519

56497 Gallon . .$ 74.99 $6749

General Finishes Flat-Out Flat Water-Based Topcoat Flat-sheened top coat with an understated look and velvety feel. Use over paint, stains or varnish, and well-suited over milk and chalk paints. Interior use only.

r Vidm/buidlock

nek Pns o.com

eeeellvlaaaa

d

bletoeeeemoooovv

....

e

ideos ild

ooop aand dvemvemvemeementente . .. . . $$$$$$2.92.92.92.999999

eral FinisheeessPaint and online at m/finishinngg

ededed ToToToT pcopcopcooatatatlvelveveety ty tyt feefeefeef l. l. l. UseUseUse andandanda chchchc alkalkalklkk papapapaintintntntnts. s. s.

T x W x L

3/4" x 18"x 18"

3/4" x 3" x 12"

11 ⁄1 2⁄⁄ " x 11 ⁄1 2⁄⁄ " x 221 ⁄1 4⁄⁄ "

4) Steel

1

2

2

3

4

22

5/16"

7/16"

3/8// " 5/8// "

11/2// "

1251/2// "

18"

n

3

Tabletop(Top View)

L LIST

rons (4)

3 Legs (4)

4 Table Top Fasteners (4

Apron(End and Inside Views)

3

Rockler® Taper/Straight Line Jig Provides consistency for

tricky tapered cuts

21597 . .$ 89.99 $6999


UE

ss

g

Gra

in

Beadlock®

Basic Kit, 3/8" Perfect for smaller projects

like face frames and doors.

34802 . . $ 29.99 $2799


10 800-279-4441




HAVE YOU

seen this?

Rockler® 3-Pc. Silicone Glue Application Kit Our silicone kit sheds glue for quick, easy cleanup and excellent durability. Includes Silicone Glue Brush with flexible Silicone Tray avnd 4" Silicone Spreader.

43662 . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 $999


Rockler® Angled Contour Sanding Grips Perfect for inside corners, V-grooves, reeded table legs, turnings and roundovers. Set of five pads 30°, 45°, 60°, 75°, 90° angles, 1/8" & 1/4" roundovers. 57874 . . . . . . . . . . . . . . . . . . . . . . $ 14.99

CUSTOMIZE:

All Titebond Glue Quarts

ONLINE VIDEO!



Earlex HV6003PUS HVLP SprayPort with FREE Cleaning Kit Spray showroom-quality finishes in record time—package includes a cleaning kit to keep your system running smoothly.

55298 . . . . . . . . . . . . . $ 515.98 $44999

Rockler® Contour Sanding Grips Ideal for sanding both inside and outside curves on moldings, dowels, edging adn fluting. Set of six inside/outside diameters: 1/4", 3/8", 1/2", 5/8", 3/4" and 7/8". 54412 . . . . . . . . . . . . . . . . . . . . . $ 14.99

Large HomeRight Spray Shelter Protects surrounding items from overspray and helps keep dust from settling on wet finishes.

59258 . . . . . . . . $ 59.99 $4999


Rockler Glue Applicator Set All your gluing needs met in one versatile, easy-to-clean kit. Attachments also fit 16 and 32 oz Titebond bottles.

57361 $ 19.99 $1499

Sale prices and items available at rockler.com/promotions

Watco Danish Oil Finishes, QuartsSale prices and items

available at rockler.com/promotions

E. . . . .

Prod

luluueeg ng nkkkitittbbbboooo

$

ee

Ea Ea Earlerlerler x x x xxwitwitwitw h h h FR Sp Sp Sprayrayrayr shshshowowowopacpacpacckagkagkage ie ie innnrunrunrunninninninng sg sg sg mmm

55255255252989898 . . .. . . . . . . . .

Roc Our sexcelflexibl

4366243662

P

PrP oduct deon page

RoRoRoRoRoocklcklcklcklcklc er er ere GlG Al Al AlAll yl yl yl yl yourourouour glg uinuingggeaseaseaseasasy-ty-ty-ty- o-co-co-o-clealeaeae n kn kkandandandand 32323232 ozozoz TiTTitebtet b

5735735735737 61616166 $$$$19.19.9.999999$

x W x L

x 18"x 18"

x 3" x 12"

" x 11 ⁄1 2⁄⁄ " x 221 ⁄1 4⁄⁄ "

eel

1

2

2

22

2

3

3

3

4

© 2017 Rockler Companies Inc.

Choose from 7 colors!

SALE $14.99Regular $17.99

11rockler.com




Full-Size Ergonomic Carbide Turning Tool, Hollowing Swan neck reaches through narrow openings to hollow out vessels and vases. Rotate cutter for a fresh, sharp edge and replace when all edges are dull. Ash handle encased in thick, molded rubber for enhanced grip and reduced fatigue. Great for beginning to advanced woodturners, ensuring quick success without the frustration of dull tools, and without the investment of sharpening equipment. Uses R1 cutter. 211/2" long overall. 53326 . . . . . . . . . . . . . . . . . . . . . $ 109.99

Rockler S-Curve Tool Rest Features two different curves to mirror the concave interior or convex exterior of turned bowls. The more angular end can tuck neatly into the opening of a narrow vessel, and round the corner for hollowing. Made of solid stainless steel with a silky smooth bearing surface for your chisel and fingers. 5/8" diameter post fits most mini and midi lathes. 9" wide x 41/2" tall. 50301 . . . . . . . . . . . . . . . . . . . . . . $ 44.99

22134

55374

Multi-Roll Sanding Pack Five rolls of J-weight, clothbacked sandpaper in 150, 240, 320, 400 and 600 grits. Impregnated with aluminum oxide for long life. 1"W x 20'L.

22134 . . . . . . . . . $ 19.99 $1499

Rockler® Multi-Roll Sandpaper Dispenser Easy way to dispense rolls from the 22134. 55374 . . . . . . . . . . . . . . . . . . . . . . $ 19.99


Bottle Opener Hardware Kits Turn your own blank to give it a custom theme like no other! Includes opener and a 5/16" threaded insert that lets you remove the handle for easy washing. Minimum blank size for the handle: 11/2" x 11/2" x 6" (not included).

42387 Chrome-plated $ 9.99 $699

44185 Pewter-plated $ 9.99 $699

Wood sold separately

Nova SuperNova 2 Insert Chuck A solid, powerful chuck, perfect for use on lathes with up to a 20" swing. Patented gearing system delivers incredible gripping power for longer, more delicate stems, and larger, rougher work. Requires a dedicated Insert/Adapter for mounting on your lathe. Includes a set of 2" (50mm) jaws.

48906 . . . . . $ 234.99 $11999

SAVE $70 when you buy a 3-Piece Set

Mini Ergonomic Carbide Turning Tools Shave costs with this Carbide Turning Tool Set. Round, square and diamond profiles. Solid carbide cutters can be rotated to expose fresh edge, then replaced when fully used.

45142 3-Piece Set . . . . . . . $ 199.99 $12999


Turning Assortment, 4 Pack Blanks for tool handles, pens and otherspindle turnings. One each of Maple, Cherry, African Padauk and African Mahogany blanks. 2" x 2" x 12" (nominal).

50774 . . . . . . . . . .$ 29.99 $1999

Rout Makemovea buil

28636

JIG I Easilyconce Conc

56778 Delux

53420

P

Rockand Includa drivcountscrew

69045

Robert Sorby ProEdge Plus Sharpening System The Sorby ProEdge Plus does just what its name implies – puts a consistent, professional-quality edge on almost any hand tool. And don't be fooled by its compact size – weighing in at over 30 lbs. 26342 . . . . . . . . $ 524.99

$41999Sale prices and items available at rockler.com/promotions

Turning Tools and ProEdge Sharpening System

Lathe Stand for Nova Comet II

52713 . . . $ 179.99 $14999

Nova Comet II 12" x 161/2" Midi Lathe with Chuck and 5-Piece Turning Set Compact lathe with reversing function, 12" swing, 3/4HP and 250-4000 RPM variable speed. Reversible four-jaw, self-centering scroll chuck. Set of 2" (50mm) jaws. Also includes 10" long HSS turning set with 1/8" and 1/4" spindle gouges, 1/8" parting tool, 1/4" round-nose scraper and 1/4" skew chisel. 52998 . . . . . . . . . . . . . . . $704.97

$59999

12 800-279-4441



02012018131609

stom er s you

g. 11/2"

699

699

tely

huck use on nted

cate quires ting

999

nd,

when

999

k there,

minal).

999

Router Fluting Jig Make repetitive flutes fast! A sliding centerpiece lets you move quickly from flute to flute, while integral scales and a built-in marking pad ensure perfect spacing every time.

28636 . . . . . . . . . . . . . . . . . . . . . $ 69.99 $5999


JIG IT® Concealed Hinge Drilling Guides Easily and accurately drill cup holes for European-style concealed hinges – without a drill press! Concealed Hinge Drilling Guide

56778 . . . . . . . . . . . . . . . . . . . . . $ 69.99 $5999

Deluxe Concealed Hinge Drilling System

53420 . . . . . . . . . . . . . . . . . . . $ 119.99 $9999


Rockler® Universal Drawer Slide Jig Install drawer slides quickly, accurately and more easily than ever. Work with most side-mount ball-bearing, epoxy and center-mount slides.

57302 . . . . . . . . . . . . . $ 29.99 $2499


56778

53420

Rockler/Insty-Drive 18-Pc. Self-Centering and Countersink Set Includes tapered countersinks, self-centering bits and a driver bit set so you can convert from drilling and countersinking to installing perfectly centered hinge screws in seconds.

69045 . . . . . . . . . . . . . . . . . . . . . $ 79.99 $4999


Select Centerline® Drawer Slides

Sale prices and items available at rockler.com/promotions

FREE Shutter Design Wizard and How-to Video at rockler.com/shutter

Create your own custom shutters!


Shutter Jig Kits Building your own custom shutter is easy. Use our FREE wizard to create your custom details.

31⁄2" Movable Shutter Jig Kit

47674 . . . . . . . . . . . . . . . . . . . . $ 134.99 $9999

21⁄2" Movable Shutter Jig Kit

44342 . . . . . . . . . . . . . . . . . . . . $ 134.99 $9999

Traditional 11⁄4" Fixed Shutter Jig Kit

49470 . . . . . . . . . . . . . . . . . . . . . $ 59.99 $4999

• 1" Overtravel allows full drawer access• Slides stay engaged to keep your drawers closed

• 100 pound weight rating ideal for most applications• Works with Rockler Universal Drawer Slide Jig

Sale prices start at

$11.49 pr.

44317

FREE $25 Gift Card with purchase of select Freud Rail & Stile Sets! Freud® Premier

Adjustable Rail and Stile Sets Mill tenons of any length! Simply removethe top portion of the cutter to producethe front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 11/4" thick. 1/2" shanks. 44317 99-762 Shaker Rail . . . . . . . . . . . . . . . $ 127.47 35392 99-760 Round Over Rail . . . . . . . . . . $ 127.47 37161 99-761 Ogee Rail . . . . . . . . . . . . . . . . $ 127.47 32427 99-763 Round Over Bead Rail . . . . . $ 127.47 35314 99-764 Bevel Rail . . . . . . . . . . . . . . . . $ 127.47 Choose from 5 profiles

13rockler.com



02072018124650

Dust Lets ytools.rubbeholderubbe 51387

S

tCh

Dust Right® Vacuum Harness Straps your shop vacuum and separator together so you can roll them around without tipping, tangling or dislodging hoses. Straps are length- and height-adjustable to fit most shop vacuums. No-mar feet adjust to fit the contours of your vacuum. Quick-release buckles let you easily detach separator and vacuum for chip disposal. For use with the Dust Right Dust Separator (#45556, sold separately). 53212 Dust Right Vacuum Harness . . . . . . . . . . . . . . . . $ 29.99 45556 Dust Right Dust Separator . . . . . . . . . . . . . . . . . $ 89.99

No loss of suction caused by clogged vacuum filters!

53212 Harness Kit


Rockler Dust Right® Shop Vacuum Hose Reel Just pull out the hose to clean up—no need to drag along a shop vacuum. Holds up to 40' of 11/2" hose.

52542 . . . . . . . . . . . . . . . . . $ 159.99 $13999

Dust Right® Heavy-Duty Shop Vacuum Hose Superior flexibility makes these hoses easy to coil, uncoil and maneuver around obstacles. Durable polymer resists kinking and crushing. Ideal for our Hose Reel (above).

50669 40' Hose . . . . . . . . . . . . .$ 99.99 $7999

Dust Right® Shop Vacuum Hose Kit Hose extends from about 2' to 12' and retracts to take up excess slack. Includes two swivel fittings that easily connect to your shop vacuum and dust ports.

58342 21⁄2" x 2' – Stretches to 12' . . . . . . . . . . . . . . . . . . . . . .$ 39.99 $2999


Dust collection to fit nearly any small tool port!


Dust Right® Auxiliary Hose Ports Additional sizes to complement your Universal Small Port Hose Kit #48212. Three useful diameters to fit numerous additional tool brands. 56613 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99

$999

Dust Right® Universal Small Port Hose Kit Award-winning flexible port connects to almost any handheld power tool! Amazingly flexible stretch hose won't fight you as you move about, and it expands from 3' to 15' long. Threads securely into the hose. 48212 . . . . . . . . . . . . . . . . . . . . . . .$ 39.99

$2999

Industrial Shop Vacuum Floor Sweep with Swiveling Head Quality, comfort and ease-of-use. Designed for extra reach under work areas and to reduce strain. Aluminum with ABS head and fittings.

52873 . . . . . . . . . $ 79.99 $6999

Fein Turbo II Compact and quiet. Auto-start triggers vacuums by turning on power tool. 58694 . . . . . . . . . . . . . . . . . . . . . $ 349.00

FREE $50 Gift Card with purchase of Fein Turbo II

Hose Coupler for Dust Right® Heavy-Duty Shop Vacuum Hoses Connects our Heavy-Duty Shop Vacuum Hoses (#58904 and #58350, sold separately) to create longer lengths. Durable, flexible PVC construction. Threaded connections for a tight seal. 57530 . . . . . . . . . . . . . . . . . . . . . . . $ 5.99

45556

53212

RockQuic AttacconveTool PFloor whee

53733

Larg Contrand s101/2” 26412

Product details

on page 36

14 800-279-4441

Sale prices valid March 2 through March 29 , 2018 Sa


02012018125552

Dust Right® Dust Hose Mounting Bracket Lets you attach a dust hose to workbenches, roller stands and stationary tools. Ideal for sanders, chop saws, lathes and drill presses. Quick-release rubber strap adjusts for hoses from 21/2" to 4". Steel C-clamp bracket mounts to the holder at various angles to fit your application. Ergonomic knob with comfortable rubber surround and no-mar swiveling clamp pad. 51387 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99

Dust Right® 4'' Hose & Handle Docking Port Kit Need a parking spot for your Dust Right handle and hose? Just mount the two rubber straps and docking port in this kit to the wall. 53568 . . . . . . . . . . . . . . . . . . . . . . $ 24.99

Rockler Dust Right® 4" Quick Change Multi-Port Tool Set Quick-Fit Handle attaches to your dust hose. Two 4" Tool Ports. Two 21/2"-4" Tool Ports for smaller tools. Five 4" Keyed Bridge Hose Clamps.

56783 . . . . . . . . . $ 54.99 $4999

SAVE — four sets with

the 4" Quick Change Handle!

Rockler Dust Right® 4" Quick Change Tool Set Quick-Fit Handle, which attaches to your dust hose. Two 4" Tool Ports attach to larger tools like table saws, jointers and planers.

52594 . . . . . . . . . $ 29.99 $2499


n ny

!

or

igned d to ead

999

49.00

d

uum

al. $ 5.99

Rockler Dust Right® 4" Quick Change Shop and Tool Set Attach to Quick Change Handle for fast, convenient cleanup. Handle slips onto Tool Port for power tool dust collection. Floor sweep rides smoothly on rubber wheels.

53733 . . . . . . . . . .$ 89.99 $7999

Dust Right® 4" Expandable Hose Amazingly stretchy hose reaches to the far corners of your shop. 51906 2' to 14' $ 39.99

$3599

58957 3' to 21' . . . . . . . . . . . . $ 49.99 $4499

57111 4' to 28' . . . . . . . . . . . . . . . . . . . . . . . . $ 69.99 $6299


Rockler Schedule 40 PVC to 4" Fitting & Hose Adapters Connects a 4" hose or dust collection fitting to schedule 40 PVC plumbing pipe. Durable rubber and polymer. 52680 Schedule 40 PVC to 4" Fitting . . . . . . . . . . . . . . . . . .$ 14.99 56472 Schedule 40 PVC to 4" Hose . . . . . . . . . . . . . . . . . . .$ 14.99

52680, PVC to 4" Fitting

PVC

56472, PVC to 4" Hose

PVC



Rockler Dust Right® 4" Quick Change Floor Sweep Set Clean up shop messes without stooping or using a broom and dust pan. 4" Quick-Fit Handle.

59524 . . . . . . . . . $ 54.99 $4999


Large Dust Hood (for 4" systems) Controls dust from miter saws, lathes, radial arm saws, carving and sanding 121/2” x 161/2” hood opening; 101/2” depth. 26412 . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 25.99

$1599

Rockler Dust Right® 4" Quick Change Handle Move a single 4" dust hose from machine to machine (required Tool Ports sold separately).

55027 . . . . . $ 14.99 $999

15rockler.com

kl i h ® 4"



01292018163243

Shop ALL monthly deals at

rockler.com/promotions

Titebond III GluePint, Quart and Gallon

See page 71 for details and prices before discount

Choose the right Router Table Package for you — to maximize your SAVINGS!

Product descriptions, packages and more accessories on the next 4 pages!

Our lineup includes three different router table tops loaded with features and priced to fit the needs of the full spectrum of woodworkers.

Whichever table top you choose, you have four options for ordering. Each provides a significant savings over purchasing the components separately.

• Table Top + Fence + Router Plate • Table Top + Fence + Router Plate + Stand• Table Top + Fence + Router Lift• Table Top + Fence + Router Lift + Stand

All router plates are predrilled in patterns to fit the most common routers – or in blank form to be drilled to fit

Package details on the next page

Any Table Top, Fence and Plate Package

SAVE up to

$59

Any Table Top, Fence, Plate and Stand Package

SAVE up to

$79

Any Table Top, Fence and Router Lift Package

SAVE up to

$49

Any Table Top, Fence, Router Lift and Stand Package

SAVE up to

$119

At 24high 100 lthick flat aversiolockinmiterDog F ★ 556★ 566 ★ 468★ 545

Durab32" xpress81⁄4" xstabilfour vversiofeathwith guard 55220 51717 56529 59870

Roc(High

Ben

Star

Star

Roc

Star

Mach24" xhighlyis prewear particacces10-poprecisadjus 55534 58538 47047 47843

SAVE $150 HPL Router Table Package + Triton Router + Accessory Kit!

Rock Two f 56764

Rockler High Pressure Laminate Router Table Package with Triton Plunge Router, Steel Stand and 4-Piece Accessory Kit An all-inclusive router table package jam-packed with features, including the acclaimed 31/4HP Triton TRA001 Plunge Router, steel stand, dust port and featherboard kit. Router features easy above-table adjustments, making it function essentially like a router lift. 3/8" thick phenolic plate for excellent stability and low-friction. Table is 11/8" thick MDF, surfaced with high pressure laminate and a microdot treatment for smoothness and scratch-resistance. Combination miter track and universal accessory T-track lets you mount featherboards, stops and jigs. Fence has right-angle solid aluminum backer with two white melamine MDF faces for zero-clearance adjustability, plus accessory T-tracks and an adjustable bit guard. 10-point plate leveling/locking system ensures a level work surface.

50122 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 729.94 $57994

16 800-279-4441


016-017 8P SH.indd 16016-017 8P SH.indd 16 2/5/18 9:46 AM2/5/18 9:46 AM

02052018094802

y

GS!

At 24" x 32"x 11⁄2" thick, the cast-iron ProMaxRT is built for generations of high productivity. Precision-ground flat and weighing in at around 100 lbs., it practically eliminates vibration. 81⁄4" x 113⁄4" x 1/4" thick solid aluminum Bench Dog ProPlate is precision-machined flat and hardcoat anodized for durability and is available in four versions predrilled to fit particular routers or in two undrilled versions. 12-point locking/leveling system ensures plate is flush with top. Table features both standard miter track and T-track slots for mounting featherboards, stops and jigs. 32" Bench Dog Fence features adjustable MDF faces, dust port and bit guard. Everyday Package Price★ 55656 ss Cast Iron Top, Bench Dog Fence and Aluminum Plate . . . . . . . . . $ 599.99 ★ 56656 ss Cast Iron Top, Bench Dog Fence, Aluminum Plate and Steel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 699.99 ★ 46855 Cast Iron Top, Bench Dog Fence & Bench Dog Pro Lift . . . . . . . . .$ 899.99 ★ 54586 Cast Iron Top, Bench Dog Fence, Bench Dog Pro Lift and Steel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 949.99

Table features dual-track machined into surface (above) and a simple 12-point plate leveling/locking system.

Fence’s top-mounted T-Track accepts accessories with 5/16" and 1/4" T-Bolts or 1/4" hex bolts

Micro-dot surface reduces friction, leading to a smoother feed rate and cleaner cuts


Durability and great performance at an affordable price. Table measures 24" x 32" x 11⁄8" thick, with a solid MDF core between two layers of durable high-pressure laminate and a micro-dot pattern on top for reduced friction. 81⁄4" x 113⁄4"x 3/8" thick phenolic router plate provides excellent stability and a naturally low-friction surface and is available in four versions predrilled to fit particular routers or in two undrilled versions. Combination miter track/universal T-track allows use of featherboards, stops and jigs. Fence features right-angle solid aluminum frame with two melamine MDF faces for zero-clearance adjustability, plus an adjustable bit guard. 10-point plate leveling/locking system ensures a level work surface. Everyday Package Price 55220 ss HPL Table Top, Rockler Fence and Phenolic Router Plate . . . . . . . . .$ 249.99 51717 ss HPL Table Top, Rockler Fence, Phenolic Router Plate and Steel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 349.99 56529 HPL Table Top, Rockler Fence and Router Lift FX. . . . . . . . . . . . . . $ 399.99 59870 HPL Table Top, Rockler Fence, Router Lift FX and Steel Stand . . . .$ 499.99

Rockler® HPL Table Packages (High-Pressure Laminate)

Bench Dog® Cast-Iron Table Packages

Starting at $24999

Starting at $59999

See the Router Plate Selection Guideon the next page to determine which plate best fits your router

Rockler ProFenceincludes dual T-Tracks, MDF sub-fences, and a 21⁄2" dust port

Rockler® Pro Phenolic Table Packages

Starting at $39999

Machined from a single piece of 3/4" thick solid phenolic material, the 24" x 32" Pro Phenolic table top is ultra-flat, ultra-smooth and highly durable. 81⁄4" x 113⁄4" x 1/4" thick solid aluminum ProPlate is precision-machined flat and hardcoat anodized for extreme wear resistance and is available in four versions predrilled to fit particular routers or in two undrilled versions. Dual miter track/T-track accepts accessories with a standard miter bar, 1/4" or 5/16" T-Bolts, or 1/4" hex bolts. 10-point locking/leveling system keeps plate flush and secure. Includes heavy-duty, precision-machined ProFence with adjustable melamine MDF faces, dust port and adjustable bit guard. Everyday Package Price 55534 ss Phenolic Table Top, ProFence and Aluminum Plate . . . . . . . . . . . . . .$ 399.99 58538 ss Phenolic Table Top, ProFence, Aluminum Plate and Steel Stand. . $ 499.99 47047 Phenolic Table Top, ProFence and Router Lift FX . . . . . . . . . . . . . . $ 549.99 47843 Phenolic Table Top, ProFence, Router Lift FX and Steel Stand. . . . $ 649.99

For a special offer on an HPL Router Table Package see page 16

Rockler® 4-Piece Router Accessory Kit Two fence featherboards, one table featherboard and dust port — 21/2" OD (21/4" ID). 56764 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 49.99

iton

imed

or ry

ility,

994

17rockler.com



02022018125541

Interchangeable inserts accommodate regular bits, oversized bits, template guides, and zero-clearance routing. Plates for Group A and Group B routers have a 31/4" (Standard) insert opening. Plates for Group C and D routers have a 311/16" (Large) opening. All plates include an insert with a 11/2" bit opening. Standard Opening Plates 4" OD 22595 11/2" Insert . . . . . . . . . . . . . $ 8.99 26854 21/2" Insert . . . . . . . . . . . . . $ 8.99 29142 Guide Bushing Insert . . . . $ 8.99 28552 Blank Insert . . . . . . . . . . . . $ 6.99 Large Opening Plates 43/8" OD 23644 11/2" Insert . . . . . . . . . . . . . $ 6.99 36377 21/2" Insert . . . . . . . . . . . . . $ 8.99 61594 Guide Bushing Insert . . . . $ 8.99 61472 Blank Insert . . . . . . . . . . . . $ 7.99 Fulcrum Pins 20692 2-Pack . . . . . . . . . . . . . . . . $ 4.49

Router Plate Template Create perfectly-sized openings for any 81/4" x 113/4" plate. Template is 1/2" thick MDF. 20956 Router Plate Template . $ 10.99 22994 Router Plate Leveling and Locking Hardware Kit . . . . . . . . . $ 6.49 33536 1/2" Pattern Routing Bit $ 18.99

Router Plate Selection GuideGroup A Routers • DeWalt 616, 618 • Makita 1100 • Milwaukee 5615-5624 • Bosch 1617-1618 and MRC23EVSK • Ridgid 2930 Combo Kit • Porter-Cable 690, 890, 7529, 97529 and 8529 • Hitachi M12VC (Fixed & Kit)

Group B Routers • DeWalt DW621 and DW621K • Craftsman Standard • Freud FT1700E and 1702 VCEK

Group C Routers • Porter-Cable 7518, 7519, 7538, and 7539 • Milwaukee 5625-20 • Triton TRA001 and MOF001

Group D Routers • Bosch 1619-1619EVS • Freud FT2000 • DeWalt 625

Aluminum Plate

Plastic Plate

Table

Table

CNC machined for precise flatness— won't sag like plastic plates

Rockler Aluminum Pro Plates CNC-machined from solid aluminum for the utmost in flatness, precision and durability. Insert ring ID: 11/2". 81/4" x 113/4" x 1/4" overall. 58316 Group A . . . . . . . . . . . . . .$ 59.99 57241 Group B . . . . . . . . . . . . . . .$ 59.99 59466 Group C . . . . . . . . . . . . . . .$ 59.99

52857 Group D . . . . . . . . . . . . . .$ 59.99 56935 Non-Drilled, 4" Insert . . .$ 59.99 50850 Non-Drilled, 43/8" Insert .$ 59.99

Bench Dog® ProLift Capable of adjustments as precise as .001", the Bench Dog ProLift puts absolute accuracy within reach – from above the table! Heavy-duty bronze bushings and direct-drive mechanism are designed to withstand demanding daily use. Fits Rockler and Bench Dog router tables. For fixed-base routers only. Accepts 4.2" diameter motor housings. Smaller motors require adapter (sold separately). Accepts Porter-Cable 690/890 series, Bosch 1617-1618, DeWalt 610, 616, 618 and similar routers. 28827 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 349.99

Bench Dog® ProLift Adapter Fits PC 690/890 Series, Bosch 1617/1618, DeWalt 610, 616/618 28842 . . . . . . . . . . . . . . . . . . . . . . $ 32.99

ONLINE VIDEO! Rockler® Aluminum

Router Lift FX An affordable lift with premium features — perfect for small to medium routers. Precision-machined aluminum

components, including heavy-duty 81/4" x 113/4"x 3/8" thick

insert plate sized to fit Rockler router tables. 311/16"

diameter center opening accepts larger raised panel bits and includes an insert ring with a 11/2" bit opening. Compatible with Rockler insert rings with larger openings. Router not included. Accepts Porter-Cable 690/890 series, Bosch 1617-1618, DeWalt 610, 616, 618 and similar routers. 23194 . . . . . . . . . . . . . . . . . . . . . $ 199.99

ONLINE VIDEO!

Incra Mast-R-Lift II Router Adjustment System Raise and lower your router without removing it from your table. Make precise 0.001" height adjustments using the included lift crank. Five sealed ball bearings on the lift screw and cam lockgive you super-smooth operation. Compatible Routers: Bosch 1617EVS, 1618,DeWalt DW610 and DW618, Porter Cable7518, 690-699 series, and 890 series, Craftsman 17543, 17540, 28190, Hitachi M12VC, KM12VC, Milwaukee 5625, 5626,5615, 5616, 5619 and Rigid R29302. 47737 . . . . . . . . . . . . . . . . . . . . . $ 349.99

Router Table Micro Adjuster Micro adjust your router fence. Onboard clamp attaches to table and houses micro adjuster screw. Included rare earth magnet attaches to reversible screw and attracts metal fence tab. This allows push and pull adjustment from either side of the fence. 38122 . . . . . . . . . . . . . . . . . . . . . . $ 19.99

ONLINE VIDEO!

BencContTabl A forwpositiwhiledimenroutetop, Bintegmitercabinand ato accroute★ 202

★ Sp

RockCabi Heavyconstinternand rport, positi1 Buito 3 sand/ocastethe caAccepBenchIncludonly.M28"WPaten★ 414 42724 42703

Rout Get manywclampPerfecto debase 7310,specifRoute 43550

JIG IT® for Router Bit Setups Set your router bit to the precise height every time! All jigs are manufactured for 3/4" stock. Made of durable HDPE and measure 2" x 37/8" x 3/4". 53810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22637 Lock Corner Bit 53779 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91947 Bead Bits 53787 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91969 Traditional Bits 53795 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91991 Classical Stile and Rail Bits 53803 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92013 Round Rail and Stile Bits 53817 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22627 45º Lock Miter Bits 53825 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92112 and 92123 Drawer Lock Bits Above JIG ITs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.99 ea.

18

Router Table Lifts and Plates

800-279-4441

018-019 8P SQ.indd 18018-019 8P SQ.indd 18 1/16/18 3:09 PM1/16/18 3:09 PM

01162018151043

e

ters ng. ve a clude

8.99 8.99 8.99 6.99

6.99 8.99 8.99 7.99

4.49

og the anism ler

quire eries, ers. 49.99

618,

32.99

ONLINE VIDEO!

t

using ball ock

1618,Cables, tachi 5626,

2. 49.99

Bench Dog® ProTop Contractor Router Table, Fence and Plate A forward-offset design and dual position fence provide ample workspace, while its 22” high cabinet (15" inside dimension) can house virtually any router. Includes a non-marring laminate top, Bench Dog’s 22” ProFence with integral 21/2" dust port, an aluminum miter track, an enclosed birch plywood cabinet that minimizes dust and noise, and a phenolic insert plate that is pre-drilled to accept virtually every popular router. For obscure routers, the plate can be custom-drilled. ★ 20253 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 299.99

★ Special shipping charges apply. Ask for specific charges when ordering.

Shown with optional accessories

Rockler® Steel Router Cabinet with Dust Bucket Heavy-duty galvanized steel construction with internal dust bucket and recessed 4" dust port, allowing snug positioning to a wall. 1 Built-in shelf. Add up to 3 shop-made drawers and/or shelves. Two casters allow you to tip the cabinet for mobility. Accepts any Rockler or Bench Dog router table. Includes steel cabinet only.Measures 351/2" H x 28"W x 18"D. Assembly required. Patent pending. Made in USA. ★ 41427 Steel Router Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 459.99 42724 Steel Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 26.99 42703 Safety Switch Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 39.99

Router Table for Trim Routers Get more out of your compact router with a rugged, adjustable table that goes anywhere! A Rockler Exclusive, it has pre-drilled holes on the back to attach a clamping strip for use on the edge of a bench, a table or the tailgate on your truck. Perfect for small applications. Sets up quickly, yet the tool-less design makes it easy to detach your router from the table and use it with the included 1/4" thick acrylic base to do freehand work. Pre-drilled to fit the Bosch Colt, Porter Cable 450 and 7310, DeWalt DW 611, and other popular trim routers, or drill the base to fit your specific router. Also includes an adjustable fence that's compatible with the Rockler Router Table Dust Port (21528, sold separately). 43550 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 59.99

Dust collection hose shroud, hose, clamps and router sold separately

i-socket 110m Tool and Vacuum Switch Dust collection will turn on automatically with tool, and stay on for 7 sec. after tool turns off to clear the hose. Use with any standard 15 amp/125 volt wet/dry vacuum or dust collector system (max 1.0 HP) or power feed unit. For indoor use only. 20890 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99

ONLINE VIDEO!

Caster Set for Rockler® Steel Shop Stands Locking lever secures the wheel and swivel at the same time. Perfect for our shop stands. 23/8" diameter ball bearing wheels. 110 lb. capacity per caster. 1/2"–13 TPI stems. 4-Pack. 47034 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 39.99

E

Safety Power Tool Switch Large, bright paddle is easy to find. Heavy-duty 15 amp switch. Includes 7' grounded cord to outlet and 2' female cord to power tool for quick plug-in and use. 20915 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99

C

Rockler® Router Table Steel Stand Our stands have a size upgrade — 26" wide for greater stability. 32" tall x 18" deep with 1/8" thick steel supports. Pre-drilled for adding cabinets. Includes leveling feet. 48426 Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 119.99

D

Table Featherboard Hold wood snug against the fence for safer, cleaner ripping, routing, drilling and more! Expandable miter track bars provide maximum holding power. Works on any tool with a standard miter slot! 53677 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99

B

Fence Featherboard An absolute must for precision and safety, this tough polymer fence featherboard can be used in both infeed and outfeed applications. The featherboard mounts with the included heavy duty T-bolts and large, easy-to-grip threaded knobs. Fits all Rockler T-slot fences and can be used with material up to 11⁄8" thick. 53685 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 16.99

AShowing: High Pressure Laminate (HPL) Router Table Package plus Steel Stand and accessories

F Router Table Dust Bucket Easy to assemble with keyhole slotted flanges to attach under most router table tops, the Dust Bucket will contain a vast majority of routing debris when you use both bucket and fence attachments with the Router Table Dual Port (20225) and your 4" dust collection system. 4" port is mountable on the back or either side. Features an easy-access door with magnetic catch for quick height adjustments and an adjustable vent for suction control to prevent boards from sticking. Galvanized steel. 13"W x 13"H x 10"D. Fits most routers and router lifts. Use with a 4" dust collection system (a shop vacuum is not powerful enough). Dust Bucket Kit 42355 Includes all 3 items listed below . . . . . . . . . . . . . . . . . . . . . $116.97 $104.99 32321 Router Table Dust Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 89.99 20225 Router Table Dual Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 15.99 34203 Router Table Dust Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 10.99

3420320225

19

Router Tables

rockler.com

C

F

A

B

D

E


01162018151043

Router Speed Control Get the appropriate speed to match the router bit and application. Set rate from 0 RPM to full speed. Use on brush-type motor routers up to 3 HP, 20 amp. Not for use with soft-start routers. 25278 . . . . . . . . . . . . . . . . . . . . . . $ 52.99

Inlay Bushing and Bit with Removable Collar Lets you cut both the inlay and recess with just one template. Maximum 3/16" depth of cut. Use this set with Porter- Cable, Black & Decker and similar bases. 27593 Inlay Bushing and Bit . . . $ 39.99 84228 Replacement Bit . . . . . . . $ 17.99

Rout Storefoamcasesour Sseparbits ax 12" 42287

11-Pc. Router Guide Bushing Kit Includes 1/4" and 1/2" shank custom centering bits, two lock nuts and seven of the most commonly used template guides. Guides fit perfectly in any base with a 11/4" diameter center hole. 59031 . . . . . . . . . . . . . . . . . . . . . . $ 41.99

Guide Bushing Router Base Affordably priced and designed with utility in mind, this router plate features a 11/4" center opening to accept guide bushings and a ring of external mounting holes to allow attachment to most popular routers. Six additional holes are dispersed evenly around the center to provide an escape for routing debris. Mounting hardware included. Guide Bushings (59031) sold separately. 35062 . . . . . . . . . . . . . . . . . . . . . . $ 11.99

Tight and Wide Router Bases For Porter-Cable 690 Series Clear polycarbonate router bases allow minimum space between cutter and material which gives increased stability and control. 88923 is the Porter-Cable replacement part for your 690 router and accepts guide bushings. 88923 11/8" opening, black . . . . $ 11.99 59069 21/2" opening . . . . . . . . . $ 11.99 59061 2" opening . . . . . . . . . . . $ 12.99 59053 15/8" opening . . . . . . . . . $ 12.99

Universal Router Base/Edge Guide Add precision to routing applications including straight and rounded edges, inlays and more with this 3/8" thick clear acrylic base with reversible edge guide. Base is 12"L overall, fits most popular routers and can easily be drilled to fit others. Different attachment points allow you to rout 0-5" from the edge. Accepts all Rockler Inter-Loc Inserts (sold separately). Includes 13/8" guide bushing Inter-Loc insert.

31186 Universal Router Base . . $ 44.99 22595 11/2" Insert . . . . . . . . . . . . . $ 8.99 26854 21/2" Insert . . . . . . . . . . . . . $ 8.99 28552 Blank Insert . . . . . . . . . . . . $ 6.99 29142 Guide Bushing Insert . . . . $ 8.99

Rout Makeexten1/2" athicknin anyreduccutterraise 20188 Rock 52909 53895

Spac Perfecpanelrubbe 12386

Rock Largesmall holdinadjus 57896

Mortise Centering Router Base Straddle the board between the pins and cut perfectly centered mortises! Multiple pin holes accommodate several wood thicknesses. Pre-drilled for Porter Cable 690/890 series, Makita 1100-1101 series, Bosch 1617-1618 and Dewalt DW616/DW618 routers. 34553 . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Rockler® Compact Router Mortise Centering Base Attaches to your compact plunge router to rout perfectly centered mortises in stock up to 4" thick! Just rotate your router until the guide pins contact both faces of your workpiece, then plunge and rout. Position the pins in threaded inserts to adapt to a range of stock thicknesses. Rotating nylon guides spin on the central brass pins to reduce friction. For offset mortises, clamp a board equal to the thickness of the offset to one side of your workpiece. Base is pre-drilled for Bosch, Dewalt and Porter-Cable compact plunge routers. 57523 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99

Rockler® Compact Router Sub-Base with Handles Large 6" diameter with integrated handles to enhance control and reduce rocking. Clear acrylic for visibility. Pre-drilled for Porter Cable, Bosch and DeWalt fixed-base compact routers. Accepts standard guide bushings. 59811 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 29.99

Rockler Offset Router Collet Wrenches for Porter-Cable Offset ends reach below the table surface for easy bit changes without skinning your knuckles. Top wrench has integral aluminum catches to keep the wrench centered on the collet nut. Soft rubber grips are easy on your palms. Fits most Porter-Cable style 11/8" collet nuts. 59408 . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99 set

ONLINE VIDEO!

20

Router Accessories

800-279-4441


01162018152644

the from ype Not

52.99

Non-Slip Router Mat 24" x 36" pad holds projects in place. Rolls up for easy storage. Black. 58960 . . . . . . . . . . . . . . . . . . . . . . . $ 9.99

Router Bit Tray Store up to 50 router bits in this hard foam tray for drawers and shop-made cases or use as a replacement tray for our Small Router Bit Case (60588, sold separately). Twenty holes for 1/4" shank bits and 30 holes for 1/2" shank bits. 6" x 12" x 11/2". . 42287 . . . . . . . . . . . . . . . . . . . . . . $ 10.99

g Kit m ven te ase

41.99

Precision Brass Setup Bars Machined solid brass setup bars allow you to accurately set depth of cut, fence to cutter distance, material thickness and more without calipers or tape measure. Includes six 21/2" L bars measuring 1/8", 3/16", 1/4", 5/16", 3/8" and 1/2" square. Can be combined for additional heights. Accurate to +/-.005". Slightly oiled for protection. Plastic storage case. 36918 . . . . . . . . . . . . . . . . . . . . . . $ 24.99

Router Bit Depth Gauge Easy and accurate depth adjustments from 1/16” to 11/2”. Now you can determine settings in precise 1/16” increments. Heavy-duty construction. 16346 . . . . . . . . . . . . . . . . . . . . . . . $ 9.99

FastCap® Mag Shims Stack up these magnetic shims to create handy setup blocks from 1/16" to 11/8" thick, in 1/16" increments. Use to set dado depths, router bit and drill bit heights, and distances from your router table fence to the bit. Use as a solid block, or fan open the stack to create a staggered block when setting blade and bit heights. Includes (8) 1/8" spacers and (2) 1/16" steel spacers. 57446 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 24.99

Router Xtreme Xtension Makes changing router bits easier and extends reach. Locking screw secures 1/2" and 1/4" shank bits used with any thickness table or insert plate. Works in any 1/2" collet. Includes 1/4" x 1/2" reduction sleeve to safely support 1/4" cutters. Requires minimum 13/4" hole to raise above the tabletop. 20188 Router Xtreme Xtension $ 76.99 Rockler® Router Collet Extensions 52909 1/4" Shank . . . . . . . . . . . $ 29.99 53895 1/2" Shank . . . . . . . . . . . $ 34.99

Space Balls Perfectly center and tightly secure panels in the frame. Synthetic rubber. .26" dia. Pack of 100. 12386 . . . . . . . . . . . . . . . . . . .$ 6.49

Rockler® Small Piece Holder Large, comfortable handles ensure precision and control while routing small parts. Scrap blocks can be mounted to faces for thicker stock, for special holding requirements or to control blowout. Quick-release clamp screw for fast adjustments. Capacity: 81/2". 57896 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 54.99

ONLINE VIDEO!

k ur a

set ble

19.99

29.99

Rockler® Deluxe Brass Setup Bars An accurate, foolproof way to set your depth of cut, fence-to-cutter distance and check thicknesses, rabbets and dadoes. Includes an expanded range of 11 sizes from 1/8" to 3/4" in 1/16" increments. Bars can be stacked to achieve sizes larger than 3/4". Dimension of each gauge is laser-etched into the brass and screen-printed onto the molded case. Accurate to +/- 0.005". Bars are 21/2" long. 51936 . . . . . . . . . . . . . . . . . . . . . . $ 59.99

Rockler® Corner Radius Routing Templates Use with a flush-trim bit and router table to create smooth corner curves with radiuses ranging from 1/8" to 2". Use alone to draw a pencil line, or click templates onto the included handle and rout on your router table. Rubber strips provide a solid grip. Twelve radiuses included: 1/8" through 1", in 1/8" increments; 11/4" through 2", in 1/4" increments. Sturdy ABS plastic. Radius is printed on each corner for easy selection. Flush trim bit with tip-mounted bearing sold separately. 57510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 49.99

21

Router Accessories

rockler.com


01162018152644

Straight Bits 1/4" shank, 2-fluted A B C 36348 . . . 1/16" . . 1/4" . . 1/4" . . $ 13.99 34780 . . . 1/8" . . . 1/2" . . 1/4" . . $ 20.99 90000 . . . 3/16" . . 1/2" . . 1/4" . . $ 13.99 81407 . . . 1/4" . . 3/4" . . . 1/4" . . $ 14.49 90022 . . . 1/4" . . . 1" . . . 1/4" . . $ 14.49 90033 . . . 5/16" . . 1" . . . 1/4" . . $ 14.99 90088 . . . 3/8" . . . 1" . . . 1/4" . . $ 14.99 90099 . . . 7/16" . . 1" . . . 1/4" . . $ 15.49 90154 . . . 1/2" . . . 3/4" . . 1/4" . . $ 15.99 90165 . . . 1/2" . . 11/4" . . 1/4" . . $ 17.49 90253 . . . 5/8" . . . 1" . . . 1/4" . . $ 17.99 90297 . . . 3/4" . . . 1" . . . 1/4" . . $ 19.99

C

B

A

Straight Bits 1/2" shank, 2-fluted A B C 90352 . . . 1/4" . . 3/4" . . . 1/2" . . $ 13.99 90385 . . . 1/4" . . . 1" . . . 1/2" . . $ 14.49 90440 . . 5/16" . . . 1" . . . 1/2" . . $ 14.99 90462 . . . 3/8" . . . 1" . . . 1/2" . . $ 15.49 90495 . . 7/16" . . . 1" . . . 1/2" . . $ 15.99 90550 . . . 1/2" . . . 1" . . . 1/2" . . $ 16.49 40343 . . . 1/2" . . 11/4" . . . 1/2" . . $ 16.99 90561 . . . 1/2" . . 11/2" . . . 1/2" . . $ 17.99 90583 . . . 1/2" . . . 2" . . . 1/2" . . $ 19.99 34928 . . . 1/2" . . 21/2" . . . 1/2" . . $ 24.99 90594 . . 9/16" . . . 1" . . . 1/2" . . $ 16.99

Straight 4-Bit Sets The four most commonly used straight bits. Carbide-tipped, 2-fluted bits: 1/4" x 1", 3/8" x 1", 1/2" x 1", and 3/4" x 1". All have 1" depth of cut. 60579 1/4" Shank . . . . . . . . $ 54.99 set 20064 1/2" Shank . . . . . . . . $ 59.99 set

Undersized Straight Bits Exact joinery for nominal plywood sizes. A B CFor 1/4" Plywood 90011 . . 15/64" . 3/4" . . . 1/4" . . $ 13.99 90330 . . 15/64" . 3/4" . . . 1/2" . . $ 14.99 For 1/2" Plywood 90110 . . 31/64" . . 1" . . . 1/4" . . $ 16.99 90528 . . 31/64" . . 1" . . . 1/2" . . $ 16.99 For 3/4" Plywood 90264 . . 23/32" . . 1" . . . 1/4" . . $ 19.99 90627 . . 23/32" . . 1" . . . 1/2" . . $ 20.99

Plywood 3-Bit Set Straight bits for undersized plywood: 23/32" for 3/4" plywood, 31/64" for 1/2" plywood and 15/64" for 1/4" plywood. 1/4" shanks. 60788 . . . . . . . . . . . . . . . . . . . $ 44.99 set

Core Box Bits Core box bits cut half-round grooves for millwork, fluted moldings, columns and signs. Cut coves using an edge guide. A B C 90891 . . 1/4" . . . 1/4" . . 1/4" . . . $ 17.99 90913 . . 3/8" . . . 3/8" . . 1/4" . . . $ 18.99 90924 . . 1/2" . . . 3/8" . . 1/4" . . . $ 19.99 90935 . . 5/8" . . . 1/2" . . 1/4" . . . $ 21.99 90946 . . 3/4" . . . 5/8" . . 1/4" . . . $ 23.99 90990 . . 5/8" . . . 1/2" . . 1/2" . . . $ 23.99 91001 . . 3/4" . . . 5/8" . . 1/2" . . . $ 29.99 23822 . . . 1" . . . . 3/4" . . 1/2" . . . $ 37.99 91057 . . 7/8" . . . 3/4" . . 1/2" . . . $ 31.99 23848 . . 11/2" . . . 7/8" . . 1/2" . . . $ 39.99 69978 . . 11/2" . . . 11/4" . . 1/2" . . . $ 42.99

B

A

C

A B C 90616 . . . 5/8" . . . 1" . . . 1/2" . . $ 17.99 90638 . . . 3/4" . . . 1" . . . 1/2" . . $ 19.99 40359 . . . 3/4" . . 11/4" . . . 1/2" . . $ 20.99 90649 . . . 3/4" . . 11/2" . . . 1/2" . . $ 23.99 90660 . . . 3/4" . . . 2" . . . 1/2" . . $ 27.99 90682 . . . 7/8" . . . 1" . . . 1/2" . . $ 20.99 90693 . . . . 1" . . . . 1" . . . 1/2" . . $ 22.99 90715 . . . . 1" . . . 11/2" . . . 1/2" . . $ 25.99 90726 . . . 11/4" . . 11/4" . . . 1/2" . . $ 28.99 90748 . . . 11/2" . . 11/4" . . . 1/2" . . $ 33.99

Not finding your router bit?

Fantastic value on high quality router bits. Competitively priced while offering high performance and long life.

K10 and K20 grade carbide for clean cutting action

RocklerSetup Jigs available for many profiles

Final sharpening with 600 - 800 grit diamond wheels

Precision balanced for smooth operation

Baked-on anti-stick coating to reduce pitch and resin buildup

Up-C The uclear HSS 62984 38238 63008 57813Carbi 82652 82660 82678

UpCut

Hing 90759 90792 90814

Trim Includsheareitherremov 23105 26841

GUARANTEEUnconditional

If you are not 100% satisfied with these bits, send them back for a refund.

VALUE PRICED

This that

KKKKKKKKccccffffcccccccaaaa

opeopeopeop ttttiiii

K10K10K10K10 anananand d d d K20K20K20K20 grgrgrgradeadeadeade carcarcarcarbidbidbidbide e e e eeforforforfor clclclcleaneaneaneann cutcutcutcutuu tintintintinnnggggactactactacttionionionion

opeopeopeopeeeratratratrationionionionoo

C

B

A

60788

Hundreds more online: rockler.com/router-bits

22

Rockler® Router Bits

800-279-4441


01162018153130

ht 4" x 1".

9 set 9 set

7.99 8.99 9.99

21.99 23.99 23.99 29.99 37.99 31.99 39.99 42.99

B

Shear Cutting Flush Trim Bits A smoother cut. Eliminates tear-out problems from routing end or cross grain on hard woods. 2-fluted, carbide-tipped with totally-enclosed bottom ball bearing guide. 27867 has bearing guides on top and bottom. A B C 24740 . . . 3/4" . . 11/2" . . . 1/2" . . $ 34.99 27867 . . . 3/4" . . 11/2" . . . 1/2" . . $ 42.99

24740

B

A

C

27867 Piloted Flush Trim Bits A B C 34592 . . . 1/4" . . 3/4" . . . 1/4" . . $ 15.99 33158 . . . 1/4" . . . 1" . . . 1/4" . . $ 16.99 90825 . . . 3/8" . . . 1" . . . 1/4" . . $ 16.99 90836 . . . 1/2" . . . 1" . . . 1/4" . . $ 17.99 90847 . . . 1/2" . . . 1" . . . 1/2" . . $ 17.99 40341 . . . 1/2" . . 11/2" . . . 1/2" . . $ 19.99 90858 . . . 1/2" . . . 2" . . . 1/2" . . $ 24.99

33536

Pattern Flush Trim Bits Top bearing allows easy cutting for templates, patterns and signs. Not for Interlock System. A B C 33536 . . . 1/2" . . 1/4" . . . 1/4" . . $ 18.99 80021 . . . 1/2" . . . 1" . . . 1/4" . . $ 21.99 35612 . . . 3/4" . . . 1" . . . 1/2" . . $ 27.99 21046 . . . 3/4" . . 11/4" . . . 1/2" . . $ 26.99 21060 . . . 11/8" . . 11/2" . . . 1/2" . . $ 34.99 33466 . . . 3/4" . . 13/4" . . . 1/2" . . $ 29.99 37348 . . . . 1" . . . 13/4" . . . 1/2" . . $ 31.99 25556 . . . 3/4" . . . 2" . . . 1/2" . . $ 44.99

21046

3-Piece Router Bit Set Three popular router bits for edge profiling, template routing and joinery: 1"D x 1/2"H Roundover/Beading Bit, 1/2"D x 1"H Piloted Flush Trim Bit and 1/4"D x 1"H Straight 2-Flute Bit. 1/4" shanks. 56265 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 49.99 set

Roundover/Beading Bit Set 1/4" shanks. Includes bearings to switch between round over and beading. 60683 1/8", 1/4", 3/8" Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 79.99 set

Up-Cut Spiral Bits The up-cut design helps keep the mortise clear of chips and shavings while you cut.HSS A B C 62984 . . . 1/4" . . . 1" . . . 1/4" . . $ 14.99 38238 . . . 3/8" . . . 1" . . . 1/2" . . $ 29.99 63008 . . . 1/2" . . 11/4" . . . 1/2" . . $ 29.99 57813 . . . 3/4" . . 11/4" . . . 1/2" . . $ 59.99 Carbide A B C 82652 . . . 1/4" . . . 1" . . . 1/4" . . $ 39.99 82660 . . . 3/8" . . . 1" . . . 3/8" . . $ 69.99 82678 . . . 1/2" . . 15/8" . . . 1/2" . . $ 99.99

Down-Cut

Up-Cut

C

A

B

Combination Round Over/Beading Bit Kits Two functions in one convenient bit! Each includes two sizes of bearings and a wrench to easily switch between round over and beading.

Hinge Mortise Bits A B C 90759 . . . 1/2" . . 3/4" . . . 1/4" . . $ 16.99 90792 . . . 1/2" . . 3/4" . . . 1/2" . . $ 16.99 90814 . . . 3/4" . . 3/4" . . . 1/2" . . $ 18.99

B

A

C

Piloted Flush Trim 3-Flute Bits 37060 . . . 1/2" . . . 1" . . . 1/2" . . $ 27.99 33516 . . . 1/2" . . 11/2" . . . 1/2" . . $ 34.99

Miniature Roundover Bit Scaled for use with 1/2" stock, are the finest available for use in creating jewelry boxes, humidors, and other small boxes and crafts! 1/4" Shank. A B R 20969 . . 9/16" . . 7/16" . . 1/8" . . $ 19.99

Spiral Up-Cut 3-Bit SetIncludes 1/4", 3/8" and 1/2" HSS Spiral Mortising Bits. 30166 . . . . . . . . . . . . . . . . . . . . . . $ 71.97

Down-Cut Spiral BitsDown-cut bits direct chip flow downward to protect finished materials.HSS A B C 28741 . . . 1/4" . . . 1" . . . 1/4" . . $ 19.99 24959 . . . 3/8" . . . 1" . . . 1/2" . . $ 29.99

37060

B

A

C

90825 Trim Router Bit Kits Includes a two-flute, carbide-tipped, shear-cutting bit and five bearings for either flush trimming or specific-width removal (1/16", 1/8", or 3/16". Patented. A B C 23105 . . . 3/4" . . . 1" . . . 1/2" . . $ 49.99 26841 . . . . 1" . . . . 2" . . . 1/2" . . $ 89.99

B

C

A

B

A

R

B

A

R

This symbol ● designates larger bits that should be used in router tables

at reduced RPM.

B

A

C

25556

Hundreds more online: rockler.com/router-bits

A B R 24632 . . . 11/2" . . 3/4" . . . 1/2" . . $ 36.99 ● 29083 . 13/4" . . 7/8" . . . 5/8" . . $ 44.99 ● 23233 . . 2" . . . . 1" . . . 3/4" . . $ 51.99

A B R1/4" Shank 24929 . . . 5/8" . . 3/8" . . 1/16" . . $ 22.99 28429 . . . 3/4" . . 3/8" . . . 1/8" . . $ 23.99 21862 . . 13/16" . 3/8" . . 5/32" . . $ 24.99 27241 . . . 7/8" . . 3/8" . . 3/16" . . $ 25.99 22804 . . . . 1" . . . 1/2" . . . 1/4" . . $ 27.99 26628 . . . 11/8" . . 1/2" . . 5/16" . . $ 29.99 28999 . . . 11/4" . . 1/2" . . . 3/8" . . $ 32.99 1/2" Shank 27713 . . . 5/8" . . 3/8" . . 1/16" . . $ 22.99 22238 . . . 3/4" . . 3/8" . . . 1/8" . . $ 23.99 27402 . . 13/16" . 3/8" . 5/32" . . $ 24.99 21026 . . . 7/8" . . 3/8" . . 3/16" . . $ 25.99 26078 . . . . 1" . . . 1/2" . . . 1/4" . . $ 27.99 21936 . . . 11/8" . . 1/2" . . 5/16" . . $ 29.99 29340 . . . 11/4" . . 5/8" . . . 3/8" . . $ 31.99

23


rockler.com


01162018153130

TOP SELLERGUARANTEE

Unconditional If you are not 100% satisfied with Rockler Router Bits, send them back for a refund

A

C

D B

Porter-Cable Dovetail Jig Bits Replacement router bits for Porter-Cable 4210-4212 dovetail jigs. 1/2" shanks. A B7º Dovetail Bit 20918 . . . . . 17/32" . . . . . 3/4" . . . . $ 19.99 Straight Cut Box Joint Bit 26857 . . . . . 13/32" . . . . . . 1" . . . . . $ 17.99

Dovetail Bits A B Degree1/4" Shank 91012 . . . 3/8" . . . 3/8" . . . 9° . . . $ 13.99 91023 . . . 1/2" . . . 1/2" . . . 14° . . . $ 14.99 91034 . . . 5/8" . . . 5/8" . . . . 14° . . . $ 15.99 91045 . . . 3/4" . . . 7/8" . . . . 7° . . . $ 16.99 1/2" Shank 91056 . . . 3/8" . . . 3/8" . . . 9° . . . $ 14.99 91078 . . . 1/2" . . . 1/2" . . . . 14° . . . $ 15.99 91089 . . . 5/8" . . . 5/8" . . . . 14° . . . $ 16.99 91111 . . . 3/4" . . . 7/8" . . . . 7° . . . $ 17.99 91122 . . . . 1" . . . . 7/8" . . . . 14° . . . $ 19.99

C

B

A

Finger Joint Bit Create maximum surface strength for edge or end-board gluing. Includes 3/4" bearing. A B C● 22617 . 13/8" . . . 11/2" . . . 1/2" . . $ 89.99

B

A

C

3-Wing Slot Cutters 1/2" depth of cut. A B C ● 38767 . 17/8" . . 5/64" . . 1/2" . . $ 36.99 ● 35166 . 17/8" . . 1/16" . . 1/2" . . $ 36.99 ● 91100 . 17/8" . . 3/32" . . 1/4" . . $ 35.99 ● 91743 . 17/8" . . 3/32" . . 1/2" . . $ 36.99 ● 92178 . 17/8" . . 5/32" . . 1/4" . . $ 35.99 ● 91757 . 17/8" . . 5/32" . . 1/2" . . $ 36.99 ● 92189 . 17/8" . . 3/16" . . 1/4" . . $ 35.99 ● 91764 . 17/8" . . 3/16" . . 1/2" . . $ 36.99 ● 92167 . 17/8" . . . 1/8" . . . 1/4" . . $ 35.99 ● 91750 . 17/8" . . . 1/8" . . . 1/2" . . $ 36.99 ● 92200 . 17/8" . . . 1/4" . . . 1/4" . . $ 35.99 ● 91785 . 17/8" . . . 1/4" . . . 1/2" . . $ 36.99

B

B

A

C

Tongue and Groove Bits A B C 92134 . . . 3/8" . . . 1/4" . . . 1/4" . . $ 57.99 92145 . . . 3/8" . . . 1/4" . . . 1/2" . . $ 59.99

B

A

C

T-Slatwall Cutter Cuts 5/16” x 11/16” slot with 3/8” groove. Overall cutting height 13/16”. Works best with MDF and soft woods. A B C 22602 . . . 11/16" . . 13/16" . . 1/2" . . $ 37.99

B

A

C

Keyhole Slot Bits Makes a blind 3/16" high slot for positive hanging on a headed fastener. A B C 92024 . . . 3/8" . . . 3/8" . . . 1/4" . . $ 14.99 92035 . . . 1/2" . . . 1/2" . . . 1/4" . . $ 15.99

Wedge Tongue and Groove Bit Stronger than dowels and biscuits, the tongue and groove joints you'll cut with this bit are perfect for edge-joining panels, table tops, or any other glue-up project. A B C 21681 . . . 11/2" . . 13/16" . . 1/2" . . $ 54.99

C

B

A

B

A

C

45° Lock Miter Bits A B C ● 22627 . 13/4" . . . 3/4" . . . 1/2" . . $ 59.99 ● 91722 . 23/4" . . 11/16" . . 1/2" . . $ 79.99 JIG IT® Installation Solutions 53817 Setup Guide for 22627. . . .$ 7.99

40362 40368

A A

C C

B

45º

This symbol ● designates larger bits that should be used in router tables

at reduced RPM.

B

A

C

Drawer Lock Corner Bit A B C ● 22637 . . 1" . . . . 1/2" . . . 1/2" . . $ 39.99 JIG IT® Installation Solutions 53810 Setup Guide. . . . . . . . . . . . . .$ 7.99

Edge V-Groove Bits Cut your pieces by centering the female and male bits on your router table. Increases glue surface for strong and economical edge-to-edge joinery. A B C 40362 . . . 13/8" . . . 3/4" . . . 1/2" . . $ 39.99 40368 . . . 13/8" . . . 3/4" . . . 1/2" . . $ 42.99

T-Slot Bit First cut a 3/8" groove with a straight router bit or dado blade. Then repeat the cut with our T-slot bit to make a track. 1/2" shanks. A B C 26099 . . . 5/8" . . 3/16" . . 1/2" . . $ 29.99

A

C

B

Biscuit Cutter Router Bit Set Cutter with arbor and three bearings makes slots for #0, #10 and #20 size biscuits. 127/32" dia. x 5/32"H x 1/4" shank. 50090 . . . . . . . . . . . . . . . . . . . $ 42.99 set

Right angle joinery applications

Drop Rule J3/4” radiusshank● 263

ClasOgee 3/8" 1/4" 91705 917161/2" 91727 91738

TablEdge 3/8" ● 919

Hundreds moreat rockler.com/router-bits

ONLINE VIDEO!

24


800-279-4441

RabbBit S Rabbwith fallowcut 5/7/16"horizoInclud 28940


01172018133425

d

d

B

ts Cable ks.

9.99

7.99

3.99 4.99 5.99 6.99

4.99 5.99 6.99 7.99 9.99

B

4.99 5.99

r bits ables

Drop Leaf Table 2-Bit Set Rule Joint Bit Set includes 1/2” radius x 3/4” H roundover bit (#24632) and 1/2” radius x 5/8” H cove bit (#91518). 1/2” shanks. ● 26318 . . . . . . . . . . . . . . . . .$ 64.99 set

B

A

C

Rabbeting Bits Each bit includes 4 bearings to vary cutting depth. Cuts

1/2", 7/16", 3/8" and 5/16" rabbets. A B C 91584 . . . 13/8" . . 1/2" . . . 1/4" . . $ 44.99 91595 . . . 13/8" . . 1/2" . . . 1/2" . . $ 37.99

B

A

R Classic Roman Ogee Bits 3/8" bearing. A B R1/4" Shank 91705 . . . . 1" . . . 1/2" . . 1/8" . . $ 39.99 91716 . . . 11/2" . . 3/4" . . . 1/4" . . $ 44.99 1/2" Shank 91727 . . . . 1" . . . 1/2" . . . 1/8" . . $ 34.99 91738 . . . 11/2" . . 3/4" . . . 1/4" . . $ 39.99

B

A

R Roman Ogee Bits 3/8" bearing. A B R1/4" Shank 91606 . . 11/16" . 15/32" 5/32" . . $ 31.99 91617 . . . 13/8" . 21/32" . . 1/4" . . $ 34.99 1/2" Shank 91628 . . 11/16" . 15/32" . 5/32" . . $ 31.99 91639 . . . 13/8" . 21/32" . . 1/4" . . $ 34.99 34206 . . . 13/8" . . 7/8" . . . 1/4" . . $ 44.99

Chamfer Bits 1/2" bearing. A B C 45° Degree 25573 . . . . 1" . . . 1/4" . . . 1/4" . . $ 24.99 21102 . . 13/16" . 11/32" . . 1/4" . . $ 26.99 22958 . . 17/16" . 15/32" . . 1/4" . . $ 32.99 21695 . . . . 1" . . . 1/4" . . . 1/2" . . $ 25.99 91551 . . 13/16" . 11/32" . . 1/2" . . $ 27.99 25162 . . 17/16" . 15/32" . . 1/2" . . $ 32.99 27444 . . . 15/8" . . 9/16" . . 1/2" . . $ 35.99 27080 . . . 17/8" . 11/16" . . 1/2" . . $ 43.99 91573 . . . 21/4" . . 7/8" . . . 1/2" . . $ 55.99

Chamfer Router Bits Each bit has just the right “degree” of angle to create the number of segments desired. Plus, the segments will align perfectly for a professional-looking project.

A B C30° 6 sides● 24805 . 13/8" . . 7/8" . . . 1/2" . . $ 39.99 22.5° 8 sides● 24798 . 11/8" . . 7/8" . . . 1/2" . . $ 34.99 15° 12 sides● 24791 15/16" . 7/8" . . . 1/2" . . $ 34.99 11.25° 16 sides● 24784 . 7/8" . . 7/8" . . . 1/2" . . $ 34.99

A

C

B

C

A

B

B

AR Cove Bits

3/8" bearing. A B R 1/4" Shank 91430 . . . 3/4" . . 3/8" . . 3/16" . . $ 24.99 91441 . . . 7/8" . . 3/8" . . . 1/4" . . $ 25.99 91452 . . . 11/8" . . 1/2" . . . 3/8" . . $ 29.99 91474 . . . 13/8" . . 5/8" . . . 1/2" . . $ 32.99 1/2" Shank 91485 . . . 3/4" . . 1/2" . 3/16" . . $ 25.99 91496 . . . 7/8" . . 1/2" . . . 1/4" . . $ 26.99 91507 . . . 11/8" . . 1/2" . . . 3/8" . . $ 27.99 91518 . . . 13/8" . . 5/8" . . . 1/2" . . $ 32.99 ● 91529 . 15/8" . . 3/4" . . 5/8" . . $ 42.99 ● 91540 . 17/8" . . 7/8" . . . 3/4" . . $ 52.99

B

A

R

Edge Beading Bits 1/2" bearing. A B R1/4" Shank 91804 . . . 7/8" . . 9/16" . . 1/8" . . $ 29.99 91815 . . . . 1" . . 11/16" . 3/16" . . $ 34.99 1/2" Shank 91826 . . . 7/8" . . 9/16" . . 1/8" . . $ 29.99 91837 . . . . 1" . . 11/16" . 3/16" . . $ 34.99 91848 . . . 11/8" . . 3/4" . . . 1/4" . . $ 39.99

BRA

Bull Nose Radius Bits A B R1/4" Shank 25683 . . . . 3/8" . . 11/16" . . 3/16" . . $ 29.99 1/2" Shank ● 30476 . . 3/8" . . 11/16" . . 3/16" . $ 29.99 ● 32545 . . 1/2" . . . 7/8" . . . 1/4" . . $ 34.99 ● 38672 . . 5/8" . . . . 1" . . . . 5/16" . $ 39.99 ● 32260 . . 3/4" . . 13/32" . . 3/8" . . $ 41.99 ● 39254 . . 3/4" . . 15/16" . . 3/8" . . $ 49.99

6-Piece Router Bit Set Six of the most popular router bits for edge profiling, template routing and joinery: 13/8"D x 5/8"H x 1/2"R Cove Bit, 11/2"D x 3/4"H x 1/2"R Roundover/Beading Bit, 13/16"D x 1/2"H Chamfer Bit, 13/8"D x 1/2"H Rabbeting Bit, 1/2"D x 1"H Piloted Flush Trim Bit and 1/2"D x 1"H Straight 2-Flute Bit. 1/2" shanks reduce chatter. Includes case. 51355 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 149.99 set 3-Piece Router Bit Set 13/8"D x 5/8"H x 1/2"R Cove Bit, 11/2"D x 3/4"H x 1/2"R Roundover/Beading Bit and 1/2"D x 1"H Straight 2-Flute Bit; 1/2" shanks. Includes case. 59538 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 79.99 set

A

BR

Triple Bead Molding Bit 5/8" bearing. A B R● 21116 . 7/8" . . . 1" . . . 1/8" . . $ 46.99

B

A

C

Table Top Edge Bit 3/8" bearing. A B C ● 91903 13/16" . . 3/8" . . . 1/4" . . $ 49.99

e/

25


rockler.com

B

A

C

Rabbeting Bit Set Rabbeting bit with four bearings allows you to cut 5/16", 3/8", 7/16" and 1/2" horizontally and up to 1" vertically. Includes Allen wrench. A B C 28940 . . . 13/8" . . . 1" . . . 1/2" . . $ 49.99


01302018133144

Freud® Quadra-Cut Rounding Over Router Bits

B

C

R(Radius)

Can't find it here? Many more Freud bits at rockler.com/router-bits

B C R 47891 . . . . 1/2" . . . . . . 1/4" . . . . 1/8" . . . . . .$ 29.97 48526 . . . . 1/2" . . . . . . 1/4" . . . . 1/4" . . . . . .$ 35.47 36528 . . . . 1/2" . . . . . . 1/2" . . . . 1/4" . . . . . .$ 35.97 37431 . . . . 5/8" . . . . . . 1/2" . . . . 3/8" . . . . . .$ 39.97 32104 . . . . 3/4" . . . . . . 1/2" . . . . 1/2" . . . . . .$ 51.97 ● 32693 . . . . 7/8" . . . . . . 1/2" . . . . 5/8" . . . . . .$ 55.97 ● 37039 . . . . . 1" . . . . . . . 1/2" . . . . 3/4" . . . . . .$ 71.47 ● 39650 . . . . 11/4" . . . . . . 1/2" . . . . . 1" . . . . . $ 118.97

Specifications for Freud and Quadra-Cut Bits available online at rockler.com/router-bits

Freud® Undersized Plywood Bit Sets Undersized bits are sized to match the actual thickness of plywood for perfect, gap-free dadoes. 37588 includes 7/32", 11/32", 15/32" and 23/32" bits to match 1/4", 3/8", 1/2" and 3/4" plywood. 45083 does not include the 11/32" bit.

37588 89-650, 4-Piece, 1/2" Shank . . . . . . . . . $ 79.97 45083 89-670, 3-Piece, 1/2" Shank . . . . . . . . . $ 58.47

Freud® 5-Piece Spiral Router Bit Sets 47782 90-150 , Upcut. . . . . . . . . . . . . . . . . . . . $ 159.97 48295 90-160 , Downcut . . . . . . . . . . . . . . . . . $ 159.97

Freud® Up-Spiral Router Bits Upward spiral is perfect for ejecting chips from mortises. It’s also the ideal bit for pattern routing because the best face goes down while cutting, with templates attached to the top. A B C 37265 75-106 . . . . 3/8" . . . . 11/4" . . . . 1/2" . . . . $ 51.47 36813 75-108 . . . . 1/2" . . . . 11/4" . . . . 1/2" . . . . $ 67.47 47669 75-100 . . . . 1/8" . . . . 1/2" . . . . 1/4" . . . . $ 21.97 46857 76-102 . . . . 1/4" . . . . . 1" . . . . 1/4" . . . . $ 24.47

Chip-free finish on the face closest to the router

A

B

C

Freud® Adjustable Tongue and Groove Bits Exclusive Freud design features a tongue cutter with opposing shear angles to ensure a flawless finish. Adjustable at .002" increments for stock 1/2" to 11/4" thick and groove widths of 7/32" to 3/8". 1/2" shanks. Dia. Height Shank 38193 . . . . . . 13/4" . . . . . . 3/8" . . . . . 1/2" . . . . . $ 79.97

37161 Ogee

32427 Roundover Bead

35314 Bevel

44317 Shaker

35392 Roundover

Create tenons of any length!Bits are adjustable to accommodate doors from 5/8" to 11⁄4" thick.

Freud® Premier Adjustable Rail and Stile Sets Mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profi le for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 11/4" thick. 1/2" shanks. ● 44317 99-762 Shaker Rail . . . . . . . . . . . . . . $ 127.47 ● 35392 99-760 Round Over Rail . . . . . . . . . $ 127.47 ● 37161 99-761 Ogee Rail . . . . . . . . . . . . . . . $ 127.47 ● 32427 99-763 Round Over Bead Rail . . . . $ 127.47 ● 35314 99-764 Bevel Rail . . . . . . . . . . . . . . . $ 127.47

Freud® Quadra-Cut 3-Piece Door Sets Sets contain Premier Adjustable Rail and Stile Bits as well as a Quadra-Cut Raised Panel Bit (profiles listed). ● 37743 97-150 . . . $ 183.47 ● 38136 97-152 . . . $ 183.47 ● 34175 97-154 . . . $ 183.47 ● 37914 97-156 . . . $ 195.97 ● 39036 97-158 . . . $ 195.97 ● 31513 97-254 . . . $ 183.47 ● 30334 97-258 . . . $ 201.97 ● 37744 97-260 . . . $ 201.97 ● 31479 97-276 . . . $ 183.47

31513 Ogee Rail, Ogee Door (31⁄2" Dia.)

30334 Ogee Rail, Cove Door, Back Cut

37744 Ogee Rail, Ogee Door, Back Cut

31479 Ogee Rail, Ogee Door (23⁄4" Dia.)

39036 Round Over, Cove Door, Back Cut

37743 Round Over, Bevel Door

34175 Round Over, Ogee Door (31⁄2" Dia.)

38136 Round Over, Cove Door

3-Piece Door Sets — Bit Profiles

37914 Roundover, Bevel Door, Back Cut

A B C 48019 32-504 . . 13/8" . . . . 1/2" . . . . 1/4" . . . .$ 57.47 32364 32-102 . . . 11/4" . . . . 1/2" . . . . 1/2" . . . .$ 31.97 37081 32-522 . . . 13/8" . . . . 1/2" . . . . 1/2" . . . . $ 42.47 31421 35-524 . . . . 13/8" . . . 1/2" . . . . 1/2" . . . . $ 57.47 33592 35-526 . . . . 13/8" . . . 3/4" . . . . 1/2" . . . . $ 62.47

B

A

C

Freud® Rabbeting Bits Produces super smooth cuts on both surfaces of the rabbet. Steel pilots can be removed from bits and used with edge guides for wider rabbets.

Freud® 2-Pc. Entry and Interior Door Bit Set Build custom doors with perfect 13/4" thick rail-and-stile joints that will last a lifetime. Bits have 1/2" shanks. Set includes storage case and free DVD. Requires minimum 2 HP variable speed router. 20218 99-267 . . . . . . . . . . . . . . . . . . . . . . . . . . $ 199.97

This symbol ● designates larger bits that should beused in router tables at reduced RPM.

Freud® Double-Flute Straight Bits Solid carbide. A B C 44564 . . 1/16" . . 1/4" . . . 1/4" . . $ 14.97 45376 . . 3/32" . . 3/8" . . . 1/4" . . $ 14.97 48003 . . . 1/8" . . 3/8" . . . 1/4" . . $ 14.97 45836 . . 3/16" . . 1/2" . . . 1/4" . . $ 15.97 46203 . . 3/16" . . 5/8" . . . 1/4" . . $ 15.97 44258 . . . 1/4" . . 3/4" . . . 1/4" . . $ 16.47 46202 . . . 1/4" . . . 1" . . . 1/4" . . $ 16.97 * 48539 . . 3/4" . . 3/4" . . . 1/4" . . $ 20.47 *Carbide flutes only

A

B

C

ONLINE VIDEO!

WhRoc• Ou• Ea• Co

thr

Dove 20439 29961 29706 24635 28920 27386

Rock Rockloffsetguidethick thick Accomphenobits (11/2" (fits rClamwith 22818

Box Unifoto givjoint penni(1/4"Paten 34974 32993

26

Freud® Router Bits

800-279-4441



See them in action online at rockler.com

Box Joint Cauls Uniformly spaced pressure points clamp individual box joint fingers at the corners to give you the tightest joints possible. Simply align the pressure points with box joint fingers and tighten in place. Slots on the outside of the Cauls are made to hold pennies firmly in place to support band clamps at varying heights. Cauls stand 61/4" (1/4" Cauls), 63/8" (3/8" Cauls), 61/2" (1/2" Cauls) and 81/4" (3/4" Cauls) tall. 4-pack. Patent pending. 34974 1/2" Cauls (Blue) . . . $ 10.99 pk. 32993 3/8" Cauls (Gray) . . . $ 10.99 pk. 33792 1/4" Cauls (Black) . . . $ 10.99 pk.

29.97 35.47 35.97 39.97 51.97 55.97 71.47 18.97

Dia.)

k Cut

ck Cut

Dia.)

99.97

B

NEO!

What to expect from the Rockler Complete Dovetail Jig:• Outstanding results at an affordable price • Easy to use for woodworkers of all skill levels• Complete jig does half-blind and full

through dovetails

Full through

Dovetail Jig Accessories 20439 4-Pc. Router Bit Upgrade Kit . . . . . . . . . . . . $ 54.99 29961 1/2" x 14º x 8mm Dovetail Bit . . . . . . . . . . $ 19.99 29706 1/2" x 8º x 8mm Dovetail Bit . . . . . . . . . . . $ 19.99 24635 1/2" to 8mm Collet Adapter . . . . . . . . . . . . $ 8.99 28920 Replacement Pin Template . . . . . . . . . . . . $ 29.99 27386 Replacement Tail Template . . . . . . . . . . . . $ 29.99

Half-blind

Rockler® Complete Dovetail Jig Rockler's exclusive one-piece stop gives you the perfect offset every time for dead-on accuracy. Preset template guide allows for quick initial setup for 1/2" to 3/4" thick stock. Cut half-blind dovetails from 1/2" to 11/8" thick and full through dovetails from 3/8" to 3/4" thick. Accommodates stock up to 11" wide. Includes two phenolic templates, three 8mm shank carbide-tipped router bits (1/2" x 14º dovetail, 1/2" x 8º dovetail, 5/16" straight), 1/2" to 8mm collet adapter and 7/16" guide bushing (fits routers using standard 7/16" x 13/8" guide bushing). Clamping bars feature abrasive surface. Requires router with 1/2" collet. Patent: rockler.com/patents 22818 Dovetail Jig . . . . . . . . . . . . . . . . . . . . . . . . .$ 164.99

Easy to adjust knobs

Preset guide for positioning templates and fence

One-piece side stop simplifies setup and ensures accuracy

22818 Includes 3 bits, adapter &

Guide Bushing

Dovetail Jig Dust Collector Eliminates virtually all dust from cutting dovetails. Connects easily to Rockler's Dovetail Jig. Includes a sliding baffle, adjustable sweep brush for stock from 1/2" to 11/8" thick, built-in 21/4" dust port and two 4" knob posts. Patent pending. 22224 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 49.99

Rockler® Router Table Spline Jig Add a wide variety of strong, beautiful splines to the corners of your projects! Jig locks into a standard router table miter slot. The sled holds your workpiece at a 45° angle while you guide it across the bit. Adjustable/removable fences position your workpiece—one setting cuts all four slots for a frame or eight slots for a box. Tool-free adjustments. Safely accepts a frame with standard 11" x 14" opening or a box up to 12" x 12" x 12". MDF base with durable ABS sled. Instructions included. 59288 . . . . . . . . . . . . . . . . . . . . . . .$ 79.99

59288

62984 38238 63008

Spiral Up-Cut Bit Optimum bit for box joints. Up-spiral design directs chips up and out of mortises and grooves, resulting in a cooler cutter, less burning and a long cutting life. HSS. 30166 HSS Bit Set (1/4", 3/8", 1/2") . . $ 71.97 62984 1/4" x 1" x 1/4", HSS . . . . . . . . $ 14.99 38238 3/8" x 1" x 1/2" HSS . . . . . . . . . $ 29.99 63008 1/2" x 11/4" x 1/2" HSS . . . . . . . $ 29.99 57813 3/4" x 11/4" x 1/2" HSS . . . . . . . $ 59.99

ONLINE VIDEO!

1/4" thick phenolic templateAbrasive clamp

bar surface prevents any slippage Cam

clamping action

Rockler® Router Table Box Joint Jig Make precise 1/4", 3/8" and 1/2" box joints on your router table with smooth-sliding backer sled and precision-machined aluminum indexing keys. Works on nearly any router table with a standard 3/4" miter slot (near edge of slot must be between 41/2"- 61/4" from the center of the bit). 29502 . . . . . . . . . . . . . . . . . . . . . . $ 84.99

Rockler® XL Router Table Box Joint Jig Machine box joints for large-scale projects on your router table. Sturdy knobs secure the base of this jig into miter slot of router table. Steel sled guides your workpiece past the bit. Includes: Aluminum indexing keys for 1/2" or 3/4" fingers; Two vertical sacrificial MDF boards for optimal support of your workpiece; Instructions. 50322 . . . . . . . . . . . . . . . . . . . . . $ 109.99

57813

27

Router Jigs

rockler.com



Large Base for Ellipse Guide Essential for narrow ellipses, bumping the maximum difference between the ellipse's major and minor axes from 8" to 14". Includes two extra dovetail keys with pivot pins. Phenolic. 38410 . . . . . . . . . . . . . . . . . . . . . $ 39.99

Rockler® Ellipse/Circle Plunge Router Guide The perfect system for picture frames, mirrors, signs, tabletops and more - all you need is your router and this jig! Compares to similar jigs that cost $100 more. Makes circles or ellipses 91/4"-52" across. Pre-drilled for Porter-Cable 690/890 routers or routers with 6" bases. Durable 1/4" thick phenolic. 27712 . . . . . . . . . . . . . . . . . . . . . . $ 89.99

ONLINE VIDEO!

Rockler® Trim Router Circle Jig Use your plunge-style trim router to cut circles from 6'' to 36'' in diameter! The jig is compact, lightweight, sets up in minutes, and is predrilled for trim routers from Porter Cable, DeWalt, and Bosch. Made of 1/4" phenolic, you can easily drill holes to fit any router. Includes two center pivot pins: one sharp, for soft woods, and one blunt one, which is used if your design allows for drilling a center hole. Slide to the desired diameter, tighten the knob and you're ready to rout! 48871 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 39.99

Rockler® Circle Cutting Jig Cut flawless circles up to 52" in diameter! Mounts quickly to many popular routers made by Porter Cable, Makita, Hitachi, DeWalt, and Bosch; or easily drill holes to fit other routers. Includes two center pivot pins and a T-bolt to tighten the center pivot pin to the jig. Durable phenolic core. Includes hardware to mount the jig to a variety of routers. 40982 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 39.99

ONLINE VIDEO!

Rockler® Rail Coping Sled Smooth-running sled ensures perfectly square coped rail ends with virtually zero tear-out and increased safety. Clear guide rail is elevated 2" above the table, so there is no risk of cutting into the sled. Toggle clamp features tool-free adjustments and holds stock securely on the rigid 3/8" thick phenolic base. Max capacity: 5" wide x 11/4" thick. 52149 . . . . . . . . . . . . . . . . . . . . . ..$ 74.99

Signmaking 3-Bit Set Carbide tipped. 1/4” shanks. Contains 1 each of the bits listed below. Not for use with the Interlock Signmaking System. 26694 3-Bit Set . . . . . . . . . . . . . $ 59.99

Individual Bits 1/4" shank 23823 1/2" Dia. 60° V-Groove . $ 21.99 90869 1/2" Dia. 90 ° V-Groove . $ 19.99 90913 3/8" x 3/8" Core Box . . $ 18.99

Router Fluting Jig Make repetitive flutes fast! A sliding centerpiece lets you move quickly from flute to flute, while integral scales and a built-in marking pad ensure perfect spacing every time. Adjusts for stock up to 8" wide. Pre-drilled to fit most routers. Durable MDF, aluminum and phenolic construction. 28636 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 69.99

Circle/Oval Router Templates Handy for making signs. Fifteen common hole sizes in just two templates! Finished circle sizes: 33/8", 31/8", 3", 27/8", 25/8", 23/8", 21/4", 21/8", 17/8", 113/16", 15/8", 17/16" and 11/4". Finished oval sizes: 23/8" x 6" and 21/4" x 41/2". Use with 1/2" Spiral Upcut Bit and the Short Shank Guide Bushing. 34499 Circle/Grommet Temp. . . $ 37.99 38756 Short-Shank Bushing . . . $ 10.99 63008 1/2" x 11/4" x 1/2" HSS . . $ 29.99 25801 1" x 36 Yd. Turner's Tape $ 19.99

Rockler® Compact Router Ellipse and Circle Jig Use your compact plunge router to create fast, accurate ellipses and circles—no math or advanced drafting skills required! Ideal for signs, tabletops and frames. Cut ellipses from as small as 6" x 11" to as large as 19" x 24", and circles from 6" to 24" in diameter. Fits Porter-Cable, Dewalt and Bosch compact plunge routers. Durable solid phenolic. 55819 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 69.99

DustCaniWalColl Premfilter small framestyle filter handlconveheavy 53522

DustGrou ImproIncludmultigroundrill band f 18003

JET DDust2-MiFilte ExclutechnseparcloggultimFeatuvelocthat ddust-1100 pleatecaptuparticdust bring fremooffer 72". ★ 428★ 428

Itemsspecishipp

DustWalDust Eliminwith It moand fcapacVolt, has a20"D★ 424 45611 21537

Dust Replapartic 20431

28

Router Jigs

800-279-4441


01172018134226

36'' utes, , and fit oft ows hten

39.99

INEEO!

tly y Clear table, e e ly on

Max

4.99

ns 1 r use m. 59.99

21.99 9.99 8.99

Dust Right® Canister Filter for Wall Mount Dust Collector Premium fabric pleats will filter dust as incredibly small as 1 micron. Steel frame with large crank-style agitator for easy filter cleaning. Agitator handle folds flat. Dust falls into the plastic bag for convenient emptying. Mounting bracket, strap clamp and heavy duty plastic collection bag included. 53522 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 199.99

53522

Dust Collection Grounding Kit Improve safety with this kit. Includes 50' bare copper multi-strand wire, two grounding screws, a 3/32" drill bit, two right terminals, and five wire connectors. 18003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99

JET DC-1100VX-CK Dust Collector with 2-Micron Canister Filter Kit Exclusive Vortex Cone technology improves chip separation and prevents clogged filters for the ultimate in dust collection! Features a 11/2 HP high air velocity fan-cooled motor that delivers a powerful dust-sucking air flow of 1100 CFM, a 2-micron pleated canister filter that captures 98% of 2-micron particles, a 5.3 cubic foot dust bag with a snap ring for easy-on/off dust removal, dual dust ports, and four casters that offer maneuverability within the shop. 37" x 221/2" x 72". Weighs 159 lbs. 5-year limited warranty. ★ 42830 With 2-Micron Canister Filter Kit . . $ 719.99 ★ 42831 With 30-Micron Bag Filter Kit . . . . . $ 529.99


Dust Right® Wall Mount Dust Collector Eliminate dust, not floor space, with this powerful portable unit. It mounts easily to any wall and features a 650 CFM suction capacity and a 3/4 HP, 60 Hz, 110 Volt, 12 amp motor. 30-micron bag has a 15 gallon capacity. 14"W x 20"D x 48" overall height. ★ 42400 . . . . . . . . . . . . . . $ 249.99 45611 30-Micron Bag . . . $ 18.99 21537 Mount. Clips (2-Pk) .$ 9.99

Dust Collector 5-Micron Bag Replaces 30-micron bag, capturing particles as small as 5 microns. 15 gallon capacity. 20431 5-Micron Bag . . . . . . . . . . . . . . . . . . . . . $ 32.99

ONLINE VIDEO!

JET® AFS-1000B Air Filtration System Cleans and circulates the air in a 20’ x 20’ x 8’ shop in under 5 minutes! Removes 98% of particles 5-microns or larger. Remote control. Electrostatic outer filter. ★ 24770 AFS-1000B . . . . . . . . . . . . . . . . . . . $ 399.99 61789 Charcoal Outer Filter . . . . . . . . . . . . . .$ 49.99 61780 3 Pocket Inner Filter . . . . . . . . . . . . . .$ 59.99 61772 Washable Outer Filter . . . . . . . . . . . . . $ 49.99 61763 Standard Outer Filter . . . . . . . . . . . . .$ 19.99 21031 Extra Remote Control . . . . . . . . . . . . .$ 29.99

Wireless Controls

Remote Switch Turn your dust collector on and off from anywhere in the shop! Signal travels up to 50 feet and easily passes through walls. Easy installation. Includes a 6' grounded cord. 110 volts. Works with dust collectors up to 11/2 HP. 43959 Remote Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 89.99 44546 Replacement Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 20.99

55782

42893

iVac Pro Tool Plus Wireless Dust Collection Controller System Plug your power tool into an iVac Pro Tool and your dust collection system into an iVac Pro Switch; powers your dust collector the moment you turn on your tool. One Pro Switch accommodates up to eight Pro Tools set to different radio frequencies. Switch is 20 Amp in your choice of 115V or 240V. 55782 iVac Pro Tool, 115V or 240V . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 59.99 42893 iVac Pro Switch, 115V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 79.99 42897 iVac Pro Switch, 240V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 79.99

SuperMax 3-Speed Air Filtration Unit Quietly filters the air in a 20' x 20' x 8' space 10, 14, or 22 times/hour, depending on the setting. Captures 91% of dust particles down to one micron. Remote lets you turn the unit on/off, adjust speed and set timer. 56894 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 359.00

NEED HELP FINDING A DUST COLLECTION SOLUTION?

rockler.com/dust-collection

nnssssss

999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999

43959

29

Dust Collection Solutions Start Here

rockler.com


01172018134227

RockQuic Floor Handlonto Tsweepa remvalve benchports to ma 53733

RockAtta Poweas youparts collec#5952 50870

4" Spring Clamps 24385 4" . . . . .$ 1.49 ea. 64544 5-Pack . .$ 4.49 pk.

4" Metal Dust Hose Hanger Clamps 10 per pack. Screws not included. 68902 4" . . . .$ 15.99 pk.

Rockler Dust Right® Anti-Static Hose Anti-static material dissipates static, helping to prevent painful shocks. Rugged, yet flexible—a pleasure to use. Each hose includes two hose clamps. Made in USA. 59123 4" inside diameter x 10'L . . . . . . . . . . . $ 44.99

Floor Sweep 35/8"H x 63/4"W x 24"L. Use Rubber Union (46301, sold separately) to connect to Dust Right components. 88452 4" Floor Sweep . . . . . . . . . . . . . . . . . . . $ 14.99 46301 4" Rubber Union . . . . . . . . . . . . . . . . . . $ 11.99

Clear Flexible Hose 26660 4" dia. x 1' . . . . . . . . . . . . . . . . . . . . . . . . $ 5.99 22791 4" dia. x 10' . . . . . . . . . . . . . . . . . . . . . . $ 30.99

Keyed Hose Clamps Thumb screw for tool-free adjustment. 5 per pack. 64512 4" . . . . .$ 9.99 pk.

Keyed Bridge Hose Clamps Applies holding power directly to your connection. Tool-free setup! 5 per pack. 26177 4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99 pk.

4" FlexForm Hose Kit 4" hose expands from 12" to 36" long, contracts and holds contorted positions for a wide variety of dust collection options. Fittings allow for tool-specific setups. Kit includes an expandable hose, nozzle and bell fitting. 42116 4" FlexForm Hose Kit . . . . . . . . . . . . . .$ 29.99 29812 4" Dia. FlexForm Hose only . . . . . . . . . $ 21.99

4" Stainless Steel Hose Clamps 58193 1-Pack . . . . .$ 2.49 53349 5-Pack . . . . $ 6.99

Dust Right® 4" Expandable Hose This amazingly stretchy 4" diameter hose reaches to the far corners of your work space for convenient cleanup and dust collection, then collapses into a compact stack for storage. Blue translucent color, weighing 30% less than previous models. Compressed/extended lengths listed below. 51906 Extends from 2' to 14' . . . . . . . . . . . . . $ 39.99 58957 Extends from 3' to 21' . . . . . . . . . . . . . $ 49.99 57111 Extends from 4' to 28' . . . . . . . . . . . . . $ 69.99

29812

42116

Dust Right® Dust Hose Mounting Bracket Lets you attach a dust hose to workbenches, roller stands and stationary tools. Ideal for sanders, chop saws, lathes and drill presses. Quick-release rubber strap adjusts for hoses from 21/2" to 4". Steel C-clamp bracket mounts to the holder at various angles to fit your application. Ergonomic knob with comfortable rubber surround and no-mar swiveling clamp pad. 51387 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99

Dust Right® 4'' Hose & Handle Docking Port Kit Need a parking spot for your Dust Right handle and hose? Just mount the two rubber straps and docking port in this kit to the wall. With the dust collector on, dock the handle and the hose compresses. Strap the hose to the wall and turn off the dust collector for neat, out-of-the-way storage. Fits 4" Expandable Hose and 4" Quick Change Handle (e.g. #57111 and #55027, sold separately). 53568 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.99

30

4" Dust Collection

800-279-4441


01302018135831

Rockler Dust Right® 4" Quick Change Tool Set Lets you quickly transfer a single 4" dust hose from tool to tool—ports fit tools with 4" dust ports. Includes Quick Change Handle, which attaches to your dust hose. 4" Tool Ports attach to larger tools like table saws, jointers and planers. Airflow valve lets you reduce suction. 52594 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99

Rockler Dust Right® 4" Quick Change Shop and Tool Set Floor Sweep and Bench Nozzle attach to Quick Change Handle for fast, convenient cleanup. Handle slips onto Tool Port for power tool dust collection. Floor sweep rides smoothly on rubber wheels, and features a removable grate to filter out large chunks. Airflow valve lets you adjust suction. Bench Nozzle cleans your benchtop without dust clouds. Purchase additional tool ports and move the Quick Change Handle from machine to machine to serve your entire shop. 53733 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 89.99

Rockler Dust Right® 4" Quick Change Multi-Port Tool Set Lets you quickly transfer a single 4" dust hose from tool to tool—ports fit tools with 21/2" or 4" dust ports. Quick Change Handle attaches to your dust hose. Two 4" Tool Ports attach to larger tools like table saws, jointers and planers. Two 21/2" to 4" Tool Ports attach to smaller tools like router tables, small band saws and benchtop tools. Airflow valve lets you reduce suction. Includes (5) 4" Keyed Bridge Hose Clamps. 56783 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 54.99

Rockler Dust Right® 4" Quick Change Floor Sweep Lets you clean up shop messes without stooping or having to use a broom and dust pan. Dust goes directly into your dust collector, rather than being stirred into the air. Rides smoothly on rubber wheels, and features a removable grate. Includes our 4'' Quick Change Handle, which lets you move a single hose from tool to tool (required Tool Ports sold separately). 59524 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 54.99

Rockler Dust Right® Magnetic Floor Sweep Attachment Powerful ceramic magnets collect ferrous metal objects as you vacuum. Reduces the chance of ferrous metal parts hitting the impeller and damaging your dust collector. Use with the Dust Right Floor Sweep (e.g. #59524 or #53733, sold separately). 50870 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 Dust Right® Quick-Release

Tool Port s Flexible rubber boot compensates for any variation in tool port size. Includes two ports and two metal hose clamps. 25516 4" . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99 pk. 28872 21/2" . . . . . . . . . . . . . . . . . . . . . . . . . .$ 14.99 pk.

Rockler Dust Right® 4" Quick Change Handle Lets you quickly move a single 4" dust hose from machine to machine (required Tool Ports sold separately). Also accepts a variety of optional cleaning attachments. Connects easily without tools. Ergonomic grip with dual connection points for strength. Angled design reduces strain on hose and user's arm. Airflow valve lets you reduce suction. Fits standard 4" hose. Quick Change opening is 41/4" ID. 55027 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99

Bring dust collection to every tool in your shop with one 4" hose!

Dust Right® 4" Handle Docking Port This mount-anywhere port secures the Dust Right Handle for instant, quick-release storage — no clamps required. Also helps keep connected hose neat and organized. Durable ABS plastic. 21323 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.99

ps 49 ea.49 pk.

event o use. A. 44.99

, sold

14.99 11.99

31

4" Dust Collection System

rockler.com


01172018160830

Dust Right® 4" Swivel Release twists and other hose tension with this free-spinning dust collection fitting — a must for Dust Right users and anyone looking for greater hose mobility! Includes fitting with rubber boot and two metal hose clamps. 21476 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 15.99

Elbow and Y-fitting not included.

27651

4" Dust Coupling Allows you to connect two 4" fittings together without additional hose or hose clamps. Plastic. 27651 4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99

4" Dust Separator Components Separate large wood chips out of your system before they reach your dust collector. Two pair of elbows and couplers serve as infeed and outfeed points when installed in the top of any barrel lid or on either end of a box (as shown in the free plan) to catch wood chips. The two coupler components fit 4" dust hose as well as the Dust Right Handle (55027, sold separately). 34367 Dust Separator Components . . . . . . . . $ 24.99

4" Dust Collection Starter Kit Add to your shop vacuum or dust collection system for a custom three-machine system. Two elbows, two Y-fittings, three Stable Gate blast gates, and twenty hose clamps included. Hose and 4" pipe sold separately. 35321 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 59.99

5" to 4" Adapter 5" O.D. - 45/8" I.D. to 4" O.D. - 35/8" I.D. 42257 . . . . . . . . . . $ 6.99

6" to 4" Adapter 6"O.D. - 53/4" I.D. to 4" O.D. - 33/4" I.D. 42258 . . . . . . . . . . $ 9.99 Reducer

88494 4" to 3" $ 6.99

Reducer 4" O.D. - 311/16" I.D. to 21/2" O.D. - 21/4" I.D. 89195 . . . . . . . . . . . . . . $ 7.99

90° Elbow 88527 4" . . . . . . $ 9.99

45/8" Flange Mount Elbow 45/8" flange end to 37/8" O.D. (35/8" I.D.). 42250 . . . . . . . . . $ 9.99

45° Dust Collection Fitting 32945 4" . . . . . .$ 7.99

21/4" to 4" Shop Vacuum Hose Enlarger 42256 . . . . . . . . . . . . . . $ 5.99

T-Connector 88501 4" . . . . . . . $ 9.99

Offset Hose Adapter Easily hook up a 4" hose directly to tools with a standard 21/4" port. Works with most benchtop tools. 20871 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.99

Hose Adapter Multi-Step Reducer can be cut down to suit your needs. Outside diameter steps are 1", 2", 21/2", 3" and 4". Made of durable 1/8" thick polymer. 23486 4" to 21/4" (OD) . . . . . . . . . . . . . . . . . . . .$ 6.99 20387 4" to 2" (OD) . . . . . . . . . . . . . . . . . . . . . . $ 6.99 28830 Multi-Step . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99

28830

23486

20387

3-Way Dust Collection Junction Add more tools to your dust collection system by branching off your main line with this 3-way junction. All ends have a 4" O.D. and a 33/4" I.D. Hose clamps not included. 42289 . . . . . . . . . . . . . . $ 17.99

Hose Splice Connector 88535 4" . . . . . . . . . . . . . . .$ 7.99

4" Adapters and ConvertersAttach two hoses of different diameters. A step down in size from 6" to 4" increases air velocity near the machine where its needed most.

Universal Dust Adapter 7-steps, 1", 2", 21/2", 3", 4", 5" and 6", all O.D. 63570 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99

4" to 21/2" “Y" Fitting 4" O.D. - 33/4" I.D. to 21/2" O.D. 21/4" I.D. “Y" fitting. 42253 . . . . . . . . . . $ 9.99

Dust Right® 4" Rubber Union Solve irregular dust collection problems with flexible rubber unions! 4" long with 4" ID. Includes two clamps. 46301 4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..$ 11.99

Uni

Dust With standoptiontable conve— yo 28666

Dustsol

Thro Here'keepia pairx 12"from 42401

Y-Connector 88519 4" . . . . . . . $ 9.99

RockFitti Connfittinginclud 52680 56472

32

4" Dust Collection

800-279-4441


01182018090100

Metal Blast Gate 20864 Fits 4" hose . . . . . . . . . . . . . . . . . . . . . . $ 14.99

Tool Blast Gate Attaches directly to 4" ports for superior on/off dust collection control. Opposite end connects to standard 4" hose. Rubber boot makes fitting to your machine air tight! Hose clamp sold separately. Patent pending. 37825 . . . . . . . . . . . . . . . . . . . . . . $ 10.99

Mounting Bracket Retro-fit standard metal or plastic gates for easy anchoring. Great for securing hose to any surface. Includes mounting screws. Patent #8,074,962. 41/2"W x 23/8"H x 11/2"D. 26813 Single Bracket . . . . . . . . . . . . . . . . . . $ 3.99 ea. 27066 4-Pack . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 pk.

"

99

unt

37/8"

.99

rger $ 5.99

ols. $ 5.99

on

ust ching is

have Hose

17.99

r $ 7.99

$ 6.99

ID.

11.99

Dust Right® Quick Connect 4" Hose Port This handy port is designed with one short end to accept 4" dust hose (hose and clamps sold separately) and a longer end to attach to the Dust Right Handle (55027, sold separately) to add additional versatility to your dust collection system. 31512 4" Hose Port . . . . . . . . . . . . . . . . . . . . . . . $ 5.99 26813 Mounting Bracket , Patent #8,074,962 . $ 3.99

31512 Dust Right® Quick Connect 4" Elbow Port Included metal hose clamps tightly secure the end with the rubber fitting to any 4" tool dust port. The 90° bend redirects dust out the other end, which fits the quick-connect Dust Right Handle (55027, sold separately) or a 4" dust hose secured with a hose clamp. 34432 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99

Universal Dust Port Attach any shop machine to your 4" dust collection system. 35/8" I.D. 55/8" flange. 42136 4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.99

4" StableGate Anchors directly to the wall for clean operation with hose fittings for standard dust hose. Made from durable ABS plastic. Patent pending. 32020 4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.99

Quick Disconnect Fittings All feature flared quick disconnects on one end for quick hose to tool port connection and removal. 63577 and 37789 are threaded for use with clear hose. 39620 is for use with any 4" hose, clamps required. Clamps and hose not included. 63577 Threaded for 21/2" to 4" Clear Hose . . . $ 5.99 37789 Threaded for 4" Clear Hose . . . . . . . . . . $ 7.99 39620 Clamped Coupler for 4" Hose . . . . . . . . $ 9.99

63577

37789

39620

Universal Dust Ports

Dust Right® Combo Port With fittings for either the Dust Right Handle or standard 4" hose, this port really expands your options. It mounts to router table cabinets, downdraft table cabinets and other boxed-in dust reservoirs for convenient quick-release or permanent suction power — your choice! 28666 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99

28666

Dust Right® Quick-Release Tool Port This innovative port mounts to your tools' 4" dust ports for quick-release suction with the Dust Right Quick Change Handle (55027, sold separately). A flexible rubber boot compensates for variations in tool port size. Pack includes two ports and two metal hose clamps. 25516 4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Dust Right Handle sold separately

Through-The-Wall Dust Right® Port Kit Here's a great way to access your dust collector while keeping it in a sound insulated storage area! Includes a pair of Dust Right Combo ports and a trim-to-size 4" x 12" pipe that lets you connect a dust collection line from one room to another. 42401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99

34432

Rockler Schedule 40 PVC to 4" Fitting and Hose Adapters Connects a 4" hose or dust collection fitting to schedule 40 PVC plumbing pipe. Hose clamp included for PVC end. Durable rubber and polymer. 52680 Schedule 40 PVC to 4" Fitting . . . . . . . $ 14.99 56472 Schedule 40 PVC to 4" Hose . . . . . . . . . $ 14.99

52680, PVC to 4" Fitting

PVC

PVC

33

4" Dust Collection

rockler.com


02072018124936

DustSma Awarport cany hAmazwon'texpanrubbeall smthe hoor sep 48212 53193

“ ThislotsPor

Dusm

Contractor Table Saw Dust Bag Lets gravity contain the bulk of your dust. Ideal for smaller shops that lack dust collection, and for contractors who routinely work on the jobsite. Fits most contractor saws. Included buttons make installation and removal a snap. Approximately 161/2" x 131/2" x 19". 48649 . . . . . . . . . . . . . . $19.99

Universal Dust Collection Port Mount this heavy-duty port almost anywhere! Three 11/4" modular arm segments and one dust hood. Locking and pivoting mechanisms allow arms to lock in position at any angle and rotation. Total extended length is 98". 4" hose not included. 63508 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 79.99

4" Mini Dust Hood Ideal for tight spaces where other hoods won't work. 131/3” x 71/4” hood accepts a standard 4” dust hose. Hose clamp required (not included). 42254 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99

Chopshop Saw Hood Heavy-duty water resistant nylon hood controls sawdust and debris. Creates a shell to contain debris to a small area and is a protective cover when working outdoors. Collapsible frame makes setup and take-down easy. Hood dimensions: 42"W x 30"D x 31"H. 36610 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 139.99

26412

Large Dust Hood (for 4" systems) Controls dust from miter saws, lathes, radial arm saws, carving, sanding, and more! Lightweight, portable and easy to position. 4” connection. 121/2” x 161/2” hood opening; 101/2” depth. Plastic. 26412 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 25.99

Rock Hold at anyholdsour rothat a 50581

DustHose Two rID anwith tSmallseparany h 53193

Downdraft Table Panels A good downdraft table is a great way to control dust while sanding, and these specialty panels make it easy to build your own! Solid steel to withstand sanding pressure, they measure 63/4" x 161/2" each. Non-slip rubber grommets create a stable surface, while removable stops (2 per panel) let you secure pieces of different sizes. Includes two panels. 25077 Downdraft Panels (2) . . . . . . . . . . . . . . $ 27.99 28666 Dust Right Combo Port . . . . . . . . . . . . . $ 6.99 58957 4" Hose Extends from 3' to 21' . . . . . . $ 49.99

Table Saw Hoods for 4" Hose 88460 121/4" x 121/4" x 21/2"H . . . . . . . . . . . . . . $ 12.99 88478 14" x 14" x 21/2"H . . . . . . . . . . . . . . . . . $ 14.99

ONLINE VIDEO!

FREE PLANONLINE

34 800-279-4441

4" Dust Collection Tool Solutions


01172018135057

Dust Right® Cord and Hose Holder Adjustable steel post suspends your power cord and dust hose neatly and safely out of the way. Cord holder and hose holder are independently height-adjustable to eliminate tangling and tripping. Clamps without tools onto any work surface up to 31/2" thick. Hose holder accepts standard 21/2" dust port on both ends. 47321 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 34.99

Dust Right® Universal Small Port Hose Kit Award-winning flexible port connects to almost any handheld power tool! Amazingly flexible stretch hose won't fight you as you move about, and it expands from 3' to 15' long. Two flexible rubber ports, 1" and 11/2'', conform to nearly all small tool port shapes. These ports swivel to avoid twisting and have an elbow to lift the hose from your work. The 21/4'' O.D. swiveling port connects to most shop vacuums or separators and threads securely into the hose. Patent Pending. 48212 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99 ea. 53193 Replacement Hose Ports (1" and 11/2") . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99

“ This hose is a great for allowing me to connect all kinds of tools without lots of different adapters. Love the fact that I can hook up DeWalt, Porter-Cable, Harbor Freight and Festool now with one hose. ”

Dust collection to fit nearly any small tool port!

See it in action at rockler.com!

w

or ust ctors e tor ake

a 2" x

9.99

ee

ock ded

79.99

ork. se.

.99

Rockler® T-Track Flex-Hold Arm Hold dust hoses, pneumatic blowers and shop lights in any orientation and at any point along a standard T-track. 18" gooseneck. Rubber hose strap holds objects with 1" to 23/4" OD. Use with our T-track table (46654) or our router tables and router table fences. Compatible with any T-track that accepts 5/16" T-bolts. 50581 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99

Dust Right® Auxiliary Hose Ports Additional sizes to complement your Universal Small Port Hose Kit #48212. Two flexible port adapters with three useful diameters—3/4" ID, 11/4" OD and 11/4" ID—to fit numerous additional brands and tools. 56613 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99

y and y tools

d 21/2"

34.99

. . . . . . . . . $14.44444444444444 99

Fit even more tools!

Dust Right® Replacement Hose Ports Two replacement hose ports, 1" ID and 11/2" ID, for those included with the Dust Right® Universal Small Port Hose Kit (#48212, sold separately). Ports flex to fit almost any handheld power tool. 53193 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Auxiliary Small Port Hose Kit Made for our Dust Right Universal Small Port Hose Kit (#48212, sold separately) to connect multiple tools at once. Reduces the need to change ports for various tools. Flexible 11/2" ID hose expands from 3' to 15'. Includes 21/4" OD Swiveling Port. Works well with our 4" to 21/2" Y-Connector (#57072, sold separately). 57114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.99

35rockler.com

21⁄2" Dust Collection

034-035 8P SQ.indd 35034-035 8P SQ.indd 35 1/29/18 8:53 AM1/29/18 8:53 AM

01292018085427

NEED HELP FINDING A DUST COLLECTION SOLUTION?

rockler.com/dust-collection

21⁄2" Anchohose durab 20129

Meta 26560

Heav Add t(5890Includuphoand c 52125

Rockler Dust Right® Bench Sweep Keep your work surfaces tidy by sweeping dust and chips into our convenient "catch-all" Bench Sweep. Use gravity and sweep into a can or bag or connect to a shop vacuum. Pivoting lid acts as a backstop when open or a blast gate when closed. Internal grid filters out larger chunks and collects screws, dowels and other hardware. Mounts quickly with keyhole slots. 3" x 18" overall. 21/2" dust port. 50608 . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Benchtop Brush Soft bristles won't mar finishes. 13" long for quick cleanup. Wooden handle. 57213 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99

Industrial Shop Vacuum Floor Sweep with Swiveling Head Quality, comfort and ease-of-use. Specially-designed for extra reach under work areas and to reduce strain on the hose for more comfort. Head swivels allowing the wand to lay almost flat. Ideal for use with our Heavy-Duty Shop Vacuum Hose Kit (#58904, sold separately). Aluminum with ABS head and fittings. 52873 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 79.99

Floor sweep head swivels almost flat

Fein Turbo II HEPA HEPA filtration captures 99.97% of particles down to 0.3 microns in size. Compact and extremely quiet. Auto-start triggers vacuums by turning on power tool. Flat tops for storage. 1100-watt motors with 151 CFM. 8.4 gal. capacity. 59298 Fein Turbo II HEPA . . . . $ 449.00 58526 Filter Bags, 5-Pack . . . . . $ 39.99 58694 Fein Turbo II . . . . . . . . . $ 349.00 52876 Fein Turbo I (5.8 gal.) . $ 269.00

52542

50669

58342

Shop-Vac® 5.0 Peak Horsepower Wall Mount 5-Gallon Wet/Dry Vac Hang on any wall for industrial suction power where floor space is limited. 5 HP unit includes an easy on/off wall mounting bracket, a cartridge type filter with foam sleeve, 18' x 11/2" diameter Lock-On hose to get around your shop, two extension wands, crevice tool, round brush, claw utility nozzle and 12" floor nozzle with brush. Made in USA. 44179 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 129.99

Rockler Dust Right® Shop Vacuum Hose Reel Just pull out the hose to clean up—no need to drag along a clunky shop vacuum. Holds up to 40' of 11/2" hose (see #50669, sold separately). Sturdy steel frame mounts to two studs. Easily rewind the hose with the integral crank. Shop vacuum should have at least 4HP. Hose 58342 (sold separately) may be used to connect to your shop vacuum. 52542 Hose Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 159.99 58342 21⁄2" x 12' Expandable Shop Vacuum Hose Kit . . . . . . . . . . . . . . . . . . .$ 39.99

Dust Right® Heavy-Duty Shop Vacuum Hoses Superior flexibility makes these hoses easy to coil, uncoil and maneuver around obstacles. Durable polymer resists kinking and crushing. Ideal for use with our Shop Vacuum Hose Reel (#52542, sold separately). Each includes 11/2" I.D. hose port and 21/4" O.D. hose port. 50669 40' Hose . . . . . . . . . . . . . $ 99.99 58350 20' Hose . . . . . . . . . . . . . $ 49.99

Get the most out of your shop vacuum system!

59298

DustShop Duraband mlengton yoI.D. h 58904

3636

21⁄2" Shop Vac Dust Collection

800-279-4441


01172018135659

?

21/2" Dust Collection Starter Kit Add this kit to your shop vac or dust collection system for a custom three-machine system. Two elbows, two Y-fittings, three Stable Gate blast gates, and twenty hose clamps included. Use a 21/2" dust hose or a 21/2" coupling (36973, sold separately) to join lengths of clear pipe, or to connect clear pipe to other 21/2" fittings. 38123 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 44.99

21⁄2" StableGate Anchors directly to the wall for clean operation with hose fittings for standard dust hose. Made from durable ABS plastic. Patent pending. 20129 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99

Metal Blast Gate 26560 Fits 21/2" hose . . . . . . . . . . . . . . . . . . . .$ 11.99

Dust Right® Separator Turn any shop vacuum with a 21/4" ID outlet into a 2-stage dust and chip separator! Collect dust longer, without losing suction caused by prematurely clogged filters. 10-gallon translucent bucket is easy to empty, holds twice the capacity of similar products, and makes it easy to see when it's full. The five-caster base gives the Dust Right Separator exceptional stability and it's easy to move around the shop. Hoses connect inside the in/out ports preventing unintentional disconnections. Includes 36" flexform connect hose to connect your shop vacuum. Patent pending. 45556 . . . . . . . . . . . . . . . . . . . $ 89.99 Hose HolderEasily store 32989 Shop Vacuum Hose. 47412 . . . . . . . . . . . . . . . . . . . $ 27.99

Heavy-Duty Shop Vacuum Accessory Kit Add this kit to the Heavy-Duty Shop Vacuum Hose Kit (58904, sold separately) for the ultimate in versatility. Includes 14" floor sweep, crevice tool, dust brush, upholstery tool, slotted nozzle, two extension wands and curved handle. Made in USA. 52125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99

Dust Right® 4" to 21/4" Shop Vacuum Tool Port Adapter Connects your shop vacuum hose to larger 4" dust ports common on power tools. One end has 4" rubber boot and hose clamp, while opposite end is made of rigid ABS that accepts standard shop vacuum hose (21/4" I.D.). 52906 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99

52906

47412 45556

ONLINE VIDEO!

Many more shop vacuum accessories at rockler.com/dust-collection

Dust Right® Shop Vacuum Handle Nozzle allows quick connection to most 21/2" fittings (hose end 21/4" ID). Air release valve controls suction power and is operable with a single finger. Connection requires 21/2" Swivel Fitting #31660, sold separately. 55083 Shop Vacuum Handle. . . . . . . . . . . . . . . $ 14.99 31660 21⁄2" Swivel Fitting. . . . . . . . . . . . . . . . . . . $ 5.99

Air release valve

Dust Right® Screened Shop Vacuum Nozzle Built-in 3/8" grid screen filters out large chips and helps prevent small parts such as dowels, splines and biscuits from being vacuumed up. Glides on tip prevent vacuum seal. 21/4" ID; 21/2" OD. 50409 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.99

areas and 904,

79.99

59.99 39.99

8

Dust Right® 12' Heavy-Duty Shop Vacuum Hose Kit Durable, flexible polymer resists kinking and crushing, and makes it easy to maneuver around your shop. 12' length allows plenty of freedom with minimal tugging on your vacuum. Includes crevice tool, claw tool, 11/2" I.D. hose port and 21/4" O.D. hose port. Made in USA. 58904 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99

37

21⁄2" Shop Vac Dust Collection

rockler.com


01172018135700

21/2" Swiveling Hose Adapter for Shop Vacuums Swivel fitting rotates 360° to help you avoid kinked and coiled hoses. Lets you attach 21/2” hose to your shop vacuum or dust collector. Use Bridge Hose Clamps (sold separately) to secure the hose. 31660 21/2" Swivel Fitting . . . . . . . . . . . . . . . . . . $ 5.99 21/2" Non-Key Bridge Hose Clamps, 5-Pack 39482 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99

Dust Right® Shop Vacuum Hose Kit Hose extends from about 2' to 12' as needed and retracts to take up excess slack. Includes two swivel fittings that easily connect to your shop vacuum and dust ports. The fittings rotate smoothly to reduce kinks and coiling, while the clamps secure the fittings to the hose. Not recommended for liquid cleanup. 58342 21⁄2" x 2' to 12' Stretch . . . . . . . . . . . . . $ 39.99 Clear Flexible Hose Wire reinforced. . 22784 21/2" diameter x 10' . . . . . . . . . . . . . . . . $ 25.99 34203 21⁄2" diameter x 36". . . . . . . . . . . . . . . . . $ 10.99

58342, Shop Vacuum Hose KitStretches from 2 to 12 ft.

21/2" FlexForm Hose Kit Hose expands, contracts (12"-36") and holds contorted positions. Fittings allow for tool-specific setups. 5-piece kit includes 1 hose, 1 wide and 1 narrow nozzle, 2 hose end adapters (21/2" OD to 21/4"OD). 33646 21⁄2" FlexForm 5-Pc. Hose Kit . . . . . . . . $ 24.99 29996 21⁄2" FlexForm Hose Only . . . . . . . . . . . $ 17.99 42255 21/2"- 21/4" Screw End Hose Adapter . . . $ 5.99

Which hose is right for your needs?

21/2" Clear Pipe Piping is more efficient than hose for dust collection over long distances. Comes in 36" lengths to bring dust from point A to point B. Use 21/2" dust hose or #36973 Coupling to join lengths of pipe, or to connect pipe to other 21/2" fittings. 36249 21/2" Clear Pipe (36" length) . . . . . . . $ 9.99 ea. 34035 21/2" Hanger Clamps, 10-Pack . . . . . $ 7.99 pk. 36973 21/2" Coupling . . . . . . . . . . . . . . . . . . . $ 4.99 ea.

3624934035 36973 30906

Fittings

Dust Coupling Connect two 21/2" fittings. 36973 . . . . . . . . . .$ 4.99

90° Elbow 63593 21/2" . . . . $ 5.99

4" to 21/2" “Y" Fitting 4" O.D. - 33/4" I.D. to 21/2" O.D. 21/4" I.D. “Y" fitting. 42253 . . . . . . . . . . .$ 9.99 T-Connector

21/2" O.D. - 21/4" I.D. 63563 . . . . . . . . . . $ 4.99

Universal Dust Port 21/2" O.D. 21/4" I.D. 92031 . . . . . . . . . . $ 7.99

21⁄2" Adapters and Converters

Flexible Rubber Adapter Fits a 21/2" hose. OD sizes: 21/2", 2", 11/2", 11/4", 1". ID 1/4" less. 42251 . . . . . . . . . . .$ 6.99

21/2" Screw End Hose Adapter Fits 21/2" FlexForm Hose (29996, sold separately). Plugs into most wet/dry vacuums. 42255 . . . . . . . . . . $ 5.99

21/4" to 4" Shop Vacuum Hose Enlarger 4" O.D. - 33/4" I.D. to 21/4" O.D. - 2" I.D. 42256 . . . . . . . . . . $ 5.99

21/2" I.D. to 21/4" I.D. Conversion Port 21/2" I.D. fitting with rubber boot and included hose clamp seals tight on 21/2" ports like T- or Y-fittings. 49887 . . . . . . . . . . $ 7.99

21/2" to 11/2" Adapter 21/2" O.D. - 21/4" I.D. to 11/2" O.D. - 11/4" I.D. 42248 . . . . . . . . . . $ 5.99

Shop Vacuum Adapter 11/4" I.D. to 21/4" O.D.

26967 . . . . . . . . . . $ 4.99

Reducer 4" O.D. - 311/16" I.D. to 21/2" O.D. - 21/4" I.D. 89195 . . . . . . . . . . $ 7.99

21/2" to 11/4" Adapter 21/2" O.D. - 21/4" I.D. to 11/4" O.D. - 1" I.D. 42252 . . . . . . . . . . $ 5.99

Keyed Bridge Hose Clamps Applies holding power directly to your connection. Tool-free setup! 5 per pack. 29509 21/2" $ 9.99 pk.

Keyed Hose Clamps Thumb screw for tool-free adjustment. 5 per pack. 64520 21/2" . . .$ 8.99 pk.

Hose Splice Connector 63555 21/2" . . . .$ 3.99 45° Elbow

30906 21/2" . . . . . $ 3.99

Y-Connector 63585 21/2" . . . . $ 4.99

Dust Right® 21/2" Rubber Union 45384 . . . . . . . . $ 9.99

Rockler Dust Right® Anti-Static Hose Anti-static material dissipates static, helping to prevent painful shocks. Rugged, yet flexible—a pleasure to use. Each hose includes two hose clamps. Made in USA. 56647 21/2" inside diameter x 10'L . . . . . . . . . $ 34.99

22784, 21⁄2" Clear Flexible Hose

56647, Rockler Dust Right Anti-Static Hose

ANTI-

STATIC

HOSE

29996Hose Only

33646

Hose Adapter

DustDust Semi-closelprojecdust cyou tuSolid systemalongdust wadjusin andfor anIncludO.D. fsystemmost 52981

21/2" Shop Vacuum Hose Adapter 58607 . . . . . . . . . $ 5.99

21/2" Stainless Steel Hose Clamps I 54030 1-Pack . . $ 1.99 51537 5-Pack . . $ 6.99

DustLathDefl Attacthe LaCollec(#529from resistarticu 52151

RockColle Splitsfor cotools—and ppackaUniveDurab 57072$ 9.99

39482

X-Tr Stretcfor plmore11/2" Conta 32316

Hose Coupler for Dust Right® Heavy-Duty Shop Vacuum Hoses Connects our Heavy-Duty Shop Vacuum Hoses (#58904 and #58350, sold separately) to create longer lengths. Durable, flexible PVC construction. Threaded connections for a tight seal. 57530 Hose Coupler . . . . . . . . . . . . . . . . . . . . . . $ 5.99

38


800-279-4441


01302018140331

ed and op (sold

$ 5.99

$ 9.99

vel nd kinks o the

39.99

25.99 10.99

to “Y"

$ 9.99

Port

7.99

$ 3.99

/2"

$ 9.99

event o use. A. 34.99

Dust Right® Lathe Dust Collection System Semi-cylindrical dust scoop closely cups your small turning projects to capture the dust created while you turn and sand. Solid steel support system slides easily along the lathe bed to collect dust wherever you are cutting. Height adjustable within a 15" range. Adjusts in and out and pivots at three points for an incredible variety of positions. Included 191/2" flex form hose fits standard 21/2" O.D. fittings to connect to your dust collection system. Dust scoop is 3" x 9". Compatible with most lathes. 52981 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 54.99

Dust Right® Cord and Hose Hook Keeps cords and hoses neatly organized and off the floor. Large hook at bottom supports 4" dust hose; medium hook in the middle accepts several air hoses; two smaller hooks accept up to two power cords each. Hook at top lets you quickly hang cords or dust hoses at a temporary workstation. Glass-filled nylon. Mounting screws not included. 58303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99 ea.

Dust Right® Quick-Release Tool Port This innovative port mounts to your tools' 4" dust ports for quick-release suction with the Dust Right Quick Change Handle (55027, sold separately). A flexible rubber boot compensates for variations in tool port size. Pack includes two ports and two metal hose clamps. 28872 21/2" . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 pk.

Universal Dust Port Attach any shop machine to your 4" dust collection system. 35/8" I.D. 55/8" flange. The 21⁄2" fitting provides an easy connection between your shop vacuum and most any machine for custom dust collection. 21⁄4" I.D. 33⁄4" flange. 42137 21/2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.99

Dust Right® Lathe Chip Deflector Attaches to the Lathe Dust Collection System (#52981, sold separately) to help deflect chips away from the turner and into the dust scoop. Shatter-resistant 4" x 9" polycarbonate deflector with 8" steel articulating arm. Not for use as a safety device. 52151 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99

See it in action at rockler.com

52151

52981

Rockler 4" to 21/2" Dust Collection Y-Connector Splits 4'' hose into two 21/2'' hoses for connection to your power tools—combines multiple hoses and ports into one affordable package. 21/2'' ports also fit our Universal Small Port Hose Kit. Durable ABS plastic. 57072 . . . . . . . . . . . . . . . . . . . . . . . $ 9.99

ooked and off thee 4" dust hose; ; everal air hoseseseeses;;ower cords eachachachaccccacachacchcchachhccchhhhacachhhaccacccaaac . ds or dust hoses at atttttnylon. Mountiing ngggng ggnggngggnn

. . . . . . . $9.99 eaeaaaeaaaaaaaaaaaaeaaaaaaaaaa..........

ockler.coccccococ mmmmmmmmmmmmm

9482

Dust Right® Shop Vacuum Accessory Organizer Convenient wall-mounted rack stores your shop vacuum attachments. Features 8 hooks and a large flat grate for hanging tools, while the upper corral cradles your extension wands. Powder-coated 3/16" steel rod. 57867 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99

Shown with optional accessories

X-Treme Tape For Dust Joints Stretches and bonds to itself to make an air-tight seal for plastic and metal dust joints, ducts, tool grips and more. Seal dust joints and accessories without clamps. 11/2" W x 20' L roll seals approximately 15 dust joints. Contains no adhesive and won't leave a sticky residue. 32316 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99

39rockler.com



01112018143341

Short StopAuto-Lock

T-Track Clamp

Rockler® T-Track Table Top A new breed of work table! Spacious top with integrated T-Track allows you to secure workpieces of all shapes and sizes for cutting, sanding, finishing or assembly. T-track accepts 5/16" and 1/4" T-bolts, as well as 1/4" hex bolts. It's easy to add T-Track Table Stops, Hold Down Clamps or Bench Cookie Plus Work Grippers and Risers. Can be mounted to a shop-built stand or Rockler's Steel Shop Stand. Top measures 28" x 40".

LongStop

46654 T-Track Table Top . . . . $ 249.99 48089 Steel Shop Stand ,

24" x 36" x 32"H . . . . . $ 139.99 47034 Caster Set for Rockler® Steel Shop Stands . . . . . . $ 39.99

35283 Hold Down Clamp

35283 Hold Down Clamp,51/2"L x 11/8"W . . . . . . . . . $ 10.99

Auto-Lock T-Track Clamp Consistent clamping pressure regardless of workpiece size—just slide the clamp face up to your work and close the lever! Pressure can be adjusted from 10-500 lbs with set screw. Bottom-mounted alignment pins can be shifted for 45° angle clamping. Clamp arm adjusts in and out a full 31/2". No-mar clamp face with notch for angled work. Fits any T-track that accepts 5/16" T-bolts, including our T-Track Table (46654, sold separately) and many of the CNC Shark tables. Use Mounting Bracket to secure clamp to shop-made jigs and fixtures. 58616 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99 ea. 2 + $ 24.99 ea.

Inline Stop Short Stop Long Stop

Low-Profile Stops for Rockler® T-Track System Combine these stops with our T-Track Table Top for a fast, accurate work-holding solution. Three styles with low-profile knobs that fold flat for tool clearance. Integrated bottom keys maintain the stops' orientation in the track. The 11/2" Short Stops hold one end of your work while belt sanding, planing or scraping. Two Inline Stops can sandwich the board so you can work in either direction, while two 5" Long Stops create a square corner for pocket hole face frame assembly. Approximately 5/8" tall. Includes 5/16"-18 T-bolts. 54161 Inline Stop . . . . . . . . . . . . .$ 7.99 50603 Short Stop . . . . . . . . . . . . . $ 7.99 53845 Long Stop . . . . . . . . . . . . $ 14.99

Buy the Set and Save! 56600 Stop Kit (2 Inline, 2 Short) $ 27.99

Auto-Lock T-Track Hold Down Clamp Automatically adjusts for anything from veneer sheets to lumber up to 23/4'' thick! Swivels 360° for flexible, versatile clamping. Once set, clamping pressure is always the same, and is adjusted only if needed with the set screw. Toggle foot is adjusted with the aluminum knob for best placement—no wrenches required. Knurled wheel locks clamp securely to any T-track that accept 5/16" T-bolts. Ideal for use with our T-Track Table (46654). 54280 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 29.99 ea. 2 + $ 24.99 ea.

Automatically adjusts on stock up to 23⁄4" thick

ONLINE VIDEO!

ONLINE VIDEO!

Bench Cookie® Plus T-Track Risers Slide into T-track and screw into Bench Cookies for an elevated work surface. 46311 2" Risers, 4-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 10.99

Bench Cookie® Plus Work Grippers Sturdy, durable discs with high-friction rubber pads lift your workpiece to provide clearance for cutters and hold it rock-steady for sawing, routing, sanding and more. 46902 4-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.99

Rockler® T-Track Inline Cam Clamp Just slide this mini cam clamp into your T-track and pull the lever to secure your work. Use with one or more of our optional T-Track Stops (e.g. #50603) and any T-track that accepts 5/16" T-bolts. Clamp face is only 5/8" high for unobstructed sanding. Rubber strips on clamp face and base reduce chance of marring or slippage. Inline keyed slot locks into T-track for further stability. 52145 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99

46902

ONLINE VIDEO!

Bench Cookie Plus Work Grippers with T-Track Risers grip your stock and provide clearance for blades

ONLINE VIDEO!

BencT-Tr Risersscrewan elefor us 46311

Benc ThreaPlus tclearaRiserswhenand t 35142 34671

40

Rockler® T-Track System

800-279-4441

Use

o


01152018152730

us you and

x

rs. nd

49.99

39.99

39.99

0.99

face with g. ed 654,

cure

9 ea.

the th ks ack

9 ea.

NEO!

Bench Cookie® Plus Work Grippers Sturdy, durable bodies sandwiched between high-friction rubber pads lift your workpiece to provide clearance for cutters and hold it rock-steady for sawing, routing, sanding and more. Threaded insert accepts optional Risers and Risers XL (sold separately) to add stability in bench dog holes and increased height. 46902 4-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 11.99

Use with or without risers!

Bench Cookie® Finishing Bridges Long ridges hold narrow rails, stiles, dowels and louver stock for finishing. Minimal surface contact means virtually no marring of the finish. Bridges snap onto any Bench Cookie. 46554 4-Pack . . . . . . . . . . . . . . . . $ 5.99

Bench Cookie® Plus T-Track Risers Risers slide conveniently into T-track and screw into Bench Cookies Plus to provide an elevated no-slip work surface. Great for use with shop-made jigs. 46311 2" Risers, 4-Pack . . . . . . . $ 10.99

Bench Cookie® Plus Sawhorse Clips Keep workpieces steady and damage-free on your sawhorses! Just screw these clips to your Bench Cookie Plus, then clip over the sawhorse for a no-mar, no-slip work surface. Fits over 2x material (11/2" thick). 43624 4-Pack . . . . . . . . . . . . . . . $ 10.99

Bench Cookie® Finishing Cones Cones lift your project off your bench with minimal surface contact, keeping it stable. Tips minimize surface contact with your workpiece while painting or finishing. Snaps onto any Bench Cookie. Patent Pending. 40607 4-Pack . . . . . . . . . . . . . . . . $ 5.99

Bench Cookie® Plus Master Kit Realize the full potential of the system. 28-piece kit has all the core functions of the Bench Cookie lineup: gripping, lifting and finishing. Includes: • 8 Work Grippers • 4 Standard Risers • 8 XL risers • 8 Cones 56071 . . . . . . . . . . . . . . . . . . . . . . $ 59.99

Rockler® Bench Cookie Storage Center Keep your Bench Cookie Work Grippers and accessories neatly organized. Stores Bench Cookie Master Set (56071), but is also useful for any Bench Cookie user. 54134 . . . . . . . . . . . . . . . . . . . . . . $ 24.99

Bench Cookie® Plus Risers Threaded ends screw into Bench Cookie Plus to elevate your work and provide clearance on the underside. Standard Risers can hold a single cookie stable in a dog hole or achieve a three cookie height when one cookie is attached to each end. Risers XL are reversible to achieve both two and three cookie heights. All Risers fit 3/4" dog holes. Patent pending. 35142 Risers, 1 or 3 Cookie Height, 2-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 4.49 34671 Risers XL, 2 or 3 Cookie Height, 4-Pack . . . . . . . . . . . . . . . . . . . . . . . . . .$ 8.99

35142

34671

C

41rockler.com

B

B

C

D

ELift your finishing project off the bench for easy access to all sides

Balance narrow stock for finishing

Raises workpiece up to three times the height of a bench cookie

Fits 3/4" bench dog holes or 3/4" holes drilled into sawhorses and other fixtures

Use Bench cookies with or without risers

A

A

40607

46554

Bench Cookies

DE



02072018125106

All Rockler T-Tracks are “universal!"Every T-Track we sell has a multi-profile design that allows you to attach a wide variety of accessories. This allows countless setups for jigs, fixtures, fences and stops so you can do more!

Accepts:• Flip Stops• Hold Downs• Stop Blocks

Attach:

2" x 2" L-Bracket connects tall 3" vertical Multi Track to shorter 21⁄4" horizontal Multi Track.

11⁄4" x 2" L-Bracket reaches lower T-Track on Multi Track.

26991

31214

33338

35605

35605 34262

MDF fence not included

MDF fence not included

35961

Multi Track35605 is two tracks highsee photo at far right

34262 is shown

Universal T-Track3/4" x 3/8" 22104, 26420, 20054

Miter Bar3/4" x 3/8"22987, 2623242733

Multi Track Brackets Connect Multi Tracks to each other (or to work surfaces) for precise custom fences. Includes two brackets, 1/4"-20 bolts (8), washers (8) and T-Track nuts (8). 35961 2" x 2" . . . . . . . . . . . . $ 19.99 pr. 33338 11/4" x 2" . . . . . . . . . $ 19.99 pr.

26991 Fence Flip Stop, 3" . . $ 16.99 ea. 31214 Fence Flip Stop, 21/4" $ 16.99 ea.

Bench Dog® Dual Track Two tracks in one! This aluminum insert includes a standard 3/4” x 3/8” miter track plus a Universal T-Track for accessories. Great for workbenches and tables. Mounting hardware not included. Solid aluminum. 23880 . . . . . . . . . . . . . . . . . . . . . .$ 31.49

17-Piece Universal T-Track Kit Ramp-up your benches, jigs, and machine tables with this hardware kit. It includes a 4' Universal T-Track, eight 5/16" T-bolts (various lengths), four 5-star knobs, and four T-knobs. T-Track measures 3/4" wide x 3/8" deep x 48" long. 24063 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 34.99

T-Track Intersection Slide your jigs and fixtures in almost any direction! Used with our 3/4" wide aluminum T-track, this 4-piece kit allows you to make the T-track intersection you need. 22209 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.99

Multi Track Full of potential, with Universal T-Tracks all around. Tracks are spaced 3/4" apart, on center. Two heights available. Made from precision extruded aluminum. 35605 3/4" x 21/4" x 36" . . . . . . . $ 29.99 34262 3/4" x 3" x 36" . . . . . . . . . $ 44.99

Hold Down Clamps Superb power and grip. Clamp includes a washer and 5/16" T-bolt. 35283 51/2"L x 11/8"W . . . . . . . . $ 10.99 45692 31/2"L x 3/4"W . . . . . . . . . . $ 5.99

45692

Universal T-Track A great addition to tables, workbenches, fences and more. 22104 2' T-Track . . . . . . . . . . . . . $ 14.99 26420 3' T-Track . . . . . . . . . . . . $ 21.99 20054 4' T-Track . . . . . . . . . . . $ 27.99

Aluminum Miter Bars Solid aluminum construction. Fits 3/4" x 3/8" slot. Adjustable for a no-slop fit. Great for cross-cut sleds, taper jigs, and more. 22987 18" . . . . . . . . . . . . . . . . . . . . $ 19.99 26232 24" . . . . . . . . . . . . . . . . . . . . $ 24.99 42733 36" . . . . . . . . . . . . . . . . . . . . $ 29.99

Mite Great3/4” L-slotmiter as yoslot b 26993

Quic5-St New quickeasy accomAvaila5/16" 63391 63399 63407

6' x 1 69116 69124

Rockler® T-Track Table Top A new breed of work table! Spacious top with integrated T-Track allows you to secure workpieces of all shapes and sizes for cutting, sanding, finishing or assembly. T-track accepts 5/16" and 1/4" T-bolts, as well as 1/4" hex bolts. It's easy to add T-Track Table Stops, Hold Down Clamps or Bench Cookie Plus Work Grippers and Risers. Can be mounted to a shop-built stand or Rockler's Steel Shop Stand. Top measures 28" x 40". 46654 T-Track Table Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 249.99 48089 24" x 36" x 32"H Steel Shop Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 139.99

Rockler® 36" Miter Track Durable aluminum track accepts standard 3/4"W x 3/8"D miter bars. Requires 1" x 1/2" deep dado. 48037 . . . . . . . . . . . . . . . . . . . . . . $ 17.99

36" Miter Track48037

48" Universal T-Track and Hold Down Clamp Kit Kit includes 48" aluminum Universal T-Track (can be cut), plus two deluxe hold-down clamps (35283), 3" T-bolts, and 5-star knob. For material up to 21/2" thick. 25736 . . . . . . . . . . . . . . . . . . . . . . $ 37.99

Dual Track1/2" x 113⁄16" x 36"

35283

ONLINE VIDEO!

ONLINE VIDEO!

51597

Rock4-StMale11/2" 51597 54545

Fema11/2" 59277 54589

Rock5-StThreeeitherhole), 58085 53767 51036

42

Jig Parts

800-279-4441

1/4" Hex bolts5/16" T-Bolts1/4" T-Bolts


01172018135930

214

ence ded

es.

9 ea.9 ea.

8” for and uded.

1.49

des a

0.99 $ 5.99

Miter Slot Hardware Kit Great for attaching jigs to any standard 3/4” W x 3/8” D miter gauge slot. 43/4” L-slot bars fit both square and T-shaped miter gauge slots and expand in the slot as you tighten the knob. Includes two slot bars, knobs, screws, and washers. 26993 . . . . . . . . . . . . . . . . . . . . . . . $ 8.99

Flush Mount Miter Slot Hardware Kit Fix jigs to any 3/4" x 3/8" standard miter slot - no protruding knob to get in the way! Includes two expandable miter slot adapters to fit any standard 3/4" wide x 3/8" deep miter slot, as well as 2 each of two different length screws for use with either 1/2" or 3/4" material. 24575 . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 6.99

Deluxe Jig Handle Perfect for push blocks and other jigs. Base has two 1/4"-20 threaded inserts for easy attachment to any design. Requires two 1/4"-20 screws. Measures 1"W x 41/2"L x 55/8"H. Molded plastic. 30876 . . . . . . . . . . . . . . . . . . . . . . . $ 4.99

32-Piece Jig Hardware Kit Contains (4) 5/16"-18 tpi thru 5-star knobs, (4) 5/16"-18 tpi stud 5-star knobs, (4) 5/16"-18 tpi thru 2" T-knobs, (8) 5-16"-18 tpi tee-nuts, (8) 5/16"-18 tpi threaded inserts, (6) 5/16"x 1" T-bolts, (6) 5/16" x 11/2" T-bolts, and (6) 5/16" x 21/2" T-bolts. 26424 . . . . . . . . . . . . . . . . . . . . . . $ 31.99

Rockler® Cam Clamps Choose from 1/4"-20 or 5/16"-18; for use with any respective 1/4"-20 or 5/16"-18 threaded/hex bolt or T-bolt. Each pack contains two cam levers, two threaded cross dowels and washers. 58244 1/4"-20 Cam Clamp . . . . . . $ 9.99 58252 5/16"-18 Cam Clamp . . . . . $ 9.99

T-Slot Bolts The T-heads fit inside T-slot track or a groove routed with T-slot bit #26099. Zinc-plated steel. 5/16"-18 Thread One each. 33965 1" $ 1.49 83311 11/2" $ 1.49

33939 21/2" $ 1.49 34771 31/2" .$ 2.49

5/16"-18 Thread Pack of five. 38791 1" $ 4.99 36677 11/2" $ 5.49

39532 21/2" $ 6.99 35087 31⁄2" $ 7.99

1/4"-20 Thread Pack of five. 31969 1" $ 3.99 38002 11/2" $ 4.99

37295 21/2" $ 5.99 35856 31/2" $ 6.99

Quick- Release 5-Star Knobs New threading and quick-release action allows for fast, easy adjustments. Through hole design accommodates bolts of various lengths. Available in three thread sizes: 1/4"-20, 5/16"-18 and 3/8"-16. 63391 1/4"-20 Knob . . . . . . . $ 3.99 ea. 63399 5/16"-18 Knob . . . . . . $ 3.99 ea. 63407 3/8"-16 Knob . . . . . . . $ 3.99 ea.

129-Piece Jig Hardware Kits A jig maker’s dream, featuring significant savings over purchasing these parts individually. Get all the essentials for building and repair! T-bolts fit all Rockler Universal T-Track. 38160 5/16"-18 tpi . . . . . . . . . . . $ 74.99

T-nuts and Brass Knobs available in Screws and

Fasteners Section 6' x 1/2" Self-Adhesive Rules 69116 Left to Right Rule . . . . . . $ 9.99 69124 Right to Left Rule . . . . . . $ 9.99

Left to Right

Right to Left

9.99 9.99

ONLINE VIDEO!

52360 50918

59277 5808851597

Each 58261 1/4"-20 bolt . . . . . . . . . . . $ 3.49 50813 3/8"-16 bolt . . . . . . . . . . . $ 3.49 59096 5/16"-18 bolt . . . . . . . . . . $ 3.49

52325

Rockler® Easy-to-Grip 4-Star Knobs Male Threading 11/2" wide. 1" projection. 1" stud. Each 51597 1/4"-20 bolt . . . . . . . . . . . $ 2.99 54545 5/16"-18 bolt . . . . . . . . . . $ 2.99

Female Threading 11/2" wide. 1" projection. 59277 1/4"-20 insert . . . . . . . . . . $ 2.99 54589 5/16"-18 insert . . . . . . . . . $ 2.99

Rockler® Easy-to-Grip 1'' Round Knobs 3/4"projection. Each 58088 1/4"-20 insert . . . . . . . . . . $ 2.99 52227 5/16"-18 insert . . . . . . . . . $ 2.99

Rockler® Easy-to-Grip T-Knobs 17/8" wide. 11/8" projection. 52325 1/4"-20 insert . . . . . . . . . . $ 2.99 57540 5/16"-18 insert . . . . . . . . . $ 2.99

Rockler® Easy-to-Grip Tall Jig Handles Use as knobs that double as handles for pulling and pushing jigs and fixtures. 41/2" handle. 5/16-18 threading. Stud on bolt version is 5/8" long. Each 52360 5/16"-18 insert . . . . . . . . . $ 4.99 50918 5/16"-18 bolt . . . . . . . . . . $ 4.99

Rockler® Easy-to-Grip 5-Star Knobs Three different threadings, each with either a threaded insert (and through-hole), or a 1" threaded stud. Each 58085 1/4"-20 insert . . . . . . . . . . $ 3.49 53767 3/8"-16 insert . . . . . . . . . . $ 3.49 51036 5/16"-18 insert . . . . . . . . . $ 3.49

Rockler® Easy-to-Grip 5-Star Fence Knobs Save your knuckles with these ultra-tall fence knobs, featuring the same comfortable shape and construction as our other Easy-to-Grip knobs. 5/16"-18 insert . 50035 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 8.99

Rockler® Easy-to-Grip Knobs and Handles Smooth, rounded contours with rubber overmolds that eliminate sharp edges and seams—the most comfortable jig knobs you'll ever use!

Soft on your hands, firm on your jigs!

43

Jig Parts

rockler.com

Insert Bolt


01172018135931

39944

31214, on facing page

Incra® Miter Slider Bar Extruded aluminum bar has an adjustable aluminum runner for perfect sliding action. Easy to lock in place for stationary table saw and router table jigs. Compatible with any standard 3/4" slot. Universal threaded mounting holes. Includes FREE plans for a variety of jigs. 27648 24" . . . . . . . . . . . . . . . . . . $ 24.99

Magswitch® Mag Jigs Turn powerful magnetic force on and off by simply turning knobs. Fast, easy setup and adjustment anywhere on a metal table! Easier to use than a C-Clamp and provides a super strong hold-down without getting in the way. Switches in and out of fixtures with ease. 20mm Magnet. 120 lb. breakaway. 28844 Magnet, 40mm Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 37.99 39194 Pro Table Featherboard, 40mm Base . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 66.99 21284 High-Carbon Steel Forstner Bit, 40mm . . . . . . . . . . . . . . . . . . . . . . . . . .$ 14.99

Plastic Jig Stock Self-lubricating for friction-free sliding of wood. UHMW plastic is easy to cut and manipulate for jigs. 67934 4" x 24" x 3/8" . . . . . . . . $ 26.99 34030 4" x 24" x 3/4" . . . . . . . . $ 30.99 68007 4" x 48" x 3/8" . . . . . . . . $ 39.99

T-Track Hold Downs Secure any T-track device to your work surface to create fences, jigs and more. Large ergonomic handle makes adjustment easy. Slotted T-track head works great with the new Multi-Track (35605 and 34262). 36767 . . . . . . . . . . . . . . . . . . . $ 24.99 pr.

Double T-Track Fence Cap 36" aluminum fixture mounts to any 3/4" fence to give you two universal T-Tracks parallel to your table. Made for use with Flip Stops (26991 and 31214) and T-Track Tape Measures (31193 and 32893). Pre-drilled holes make installation to any subfence easy. 39944 . . . . . . . . . . . . . . . . . . . . . . $ 34.99

39944

Universal Fence Clamps Innovative clamps hold shopmade fences to table saws, band saws, cutoff saws, router fences and more. Use individually as stop blocks, or in pairs for sacrificial fences, half-fences, resaw fences, and a variety of other fixtures. Range of travel: 1/2"- 53/4" (1/2" minimum assumes a 3/4" auxiliary fence; you can clamp to an even thinner primary fence if you use a thicker auxiliary fence). 31373 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99 pr.

ZeroPlay Guide Bar System Each guide bar is composed of two interlocking plastic bars that adjust laterally to the exact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. Guide Bar System includes two guide bars, two ZeroPlay™ stops, hardware and plans for various jigs. Only fits 3/4" x 3/8" T-type miter slot. 30614 Guide Bar System . . . . . $ 34.99 35828 Guide Bar only . . . . . . . . $ 15.99

Magswitch® Workholding System Starter Kit Make your shop safer and more efficient with patented Magswitch technology. Powerful MagJig 150 magnets turn on or off in an instant, letting you position the Universal Base and other Magswitch accessories anywhere on a metal work surface. 38007 . . . . . . . . . . . . . . . . $ 76.99

QuickChanwith Movesimp

Kreg Anodto anallowaccesadhesTrack 26358 21938 69116 69124

28844 39194

T-Track Tape Measures 48" tape measure inserts fit any universal T-Track to give you accurate measurements to 1/16". Included acrylic hairline indicator can be attached to Rockler Flip Stops (26991 and 31214) or homemade stops. Works well with the Double T-Track Fence Cap (39944) and Multi Track (35605 and 34262). 31193 Right-To-Left Tape . . . . . $ 10.99 32893 Left-To-Right Tape . . . . . $ 10.99

Autoand Each clampslide PressBottoangleclampfits anBrackmade 58616 . . . .

ONLINE VIDEO!

18" Measuring Kit for Jigs Add pinpoint accuracy to your jigs, drill press fences and router table fences. Includes 2 left-to-right and 2 right-to-left 18" peel-and-stick tapes and 2 transparent cursors for shop-made stop blocks. 58357 . . . . . . . . . . . . . . . . . . . . . . $ 15.99

44

Jig Parts

800-279-4441


01172018140416

fect for e 3/4" oles. jigs.

24.99

up

out of

37.99 66.99 4.99

9 pr.

QuickSet Push Down Lever Clamp 27973 Arm: 17/8"L x 19/16"H . . . $ 20.99 25277 Arm: 21/8"L x 1"H . . . . . . $ 16.99

QuickSet Post Handle Clamp 29179 Arm: 25/8"L x 11/4"H . . . . $ 19.99 29015 Arm: 25/8"L x 21/4"H . . . . $ 21.99

1/4" and 5/16" QuickSet Pressure Adapters Enjoy simpler depth-adjustments than ever before! 28153 has a 1/4" bolt and fits on clamp arms 9/16" x 9/16" or smaller. 26655 has a 5/16" bolt and fits 11/16" x 5/8" or smaller arms. Included with all QuickSet Toggle Clamps. Patented. 28153 1/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 3.99 26655 5/16" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 3.99

QuickSetChange depth-of-pressure in seconds with the adjustable rubber foot. Move in-and-out along the arm by simply loosening the set screw.

Easy-grip locking knob

Clamp not included with adapters

Kreg 48" Top Trak and Flip Stop Anodized aluminum Top Trak mounts to any 3/4" thick shop-made fence, allowing you to use 1/4" hex bolt accessories like the Flip Stop. Self-adhesive measuring tape for the Top Track is sold separately. 26358 48" Long Top Trak . . . . $ 34.99 21938 Flip Stop . . . . . . . . . . . . . $ 29.99 69116 L to R Self-stick 6' Rule . . $ 9.99 69124 R to L Self-stick 6' Rule . . $ 9.99

Fence Flip Stops Get set-up for fast, repeatable drilling and cutting! The aluminum arm flips down when you need it and stays out of the way when you don't! 5/16" T-bolt fits both standard and Universal T-tracks. 31214 21/4" . . . . . . . . . . . . . . . . . $ 16.99 26991 3" . . . . . . . . . . . . . . . . . . . $ 16.99

QuickSet Heavy-Duty Lever Clamp 29485 Arm: 25/8"L x 17/16"H . . . $ 18.99 26891 Arm: 25/8"L x 21/8"H . . . . $ 24.99

Mag-Dro® Mitre Slot Base Bring the accuracy of your best 6" caliper to the 3/4" slot on your table saw, band saw, router table, and more. Connects and disconnects to most 6" calipers in seconds and locks tight for accurate measurements. Can also be clamped or screwed to a flat surface and is perfect for jigs. Also use it to align the fence. 41818 . . . . . . . . . . . . . . . . . . . . . . . $ 8.99

Mag-Dro® Magnetic Base This magnetic base adheres to any ferrous surface, and clamps to the shaft of your caliper, allowing you to use it as a simple setup gauge on table saws, band saws, drill presses and more. Great for checking runout on blades or bits. 41424 . . . . . . . . . . . . . . . . . . . . . . $ 10.99

Auto-Lock T-Track Clamps and Mounting Brackets Each Auto-Lock T-Track Clamp provides consistent clamping pressure regardless of workpiece size—just slide the clamp face up to your work and close the lever! Pressure can be adjusted from 10-500 lbs with set screw. Bottom-mounted alignment pins can be shifted for 45° angle clamping. Clamp arm adjusts a full 31/2". No-mar clamp face with notch for angled work. Clamp base also fits any T-track that accepts 5/16" T-bolts. Use a Mounting Bracket to secure each clamp to any work surface or shop-made jigs and fixtures. 58616 Auto-Lock T-Track Clamp . . . . . . . . . . . $ 29.99 ea. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Buy 2 at $ 24.99 ea.

26991

31214

No more tedious fiddling with adjustment nuts!

ONLINE VIDEO!

ONLINE VIDEO!

and pes made

5.99

45

Jig Parts

rockler.com


01172018140416

Clamp-It® Assembly Square Use as a third hand to assemble any two pieces at 90º, or even to put a cabinet together one corner at a time. High-impact, rigid polycarbonate ensures strength and accuracy. 8" x 8" x 11/2". 29190 . . . . . . . . . . . . .$ 12.99 ea. . . . . . . $ 11.69 4 +

Mini Clamp-It® Assembly Square The same great features as our original Clamp-It but half the size. Measures 4" x 4" x 11/4" square. 27767 . . . . . . . . . . . . . . $ 9.99 ea. . . . . . . . . $ 8.99 4 + 4" Mini Bar Clamp 20201 . . . . . . . . . . . . . . $ 4.99 ea. . . . . . . . . . $ 4.49 4 + Mini Clamp-It® Kit Includes two Mini Clamp-It Assembly Squares and four 4" Mini Bar Clamps. 69962 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 37.99

Clamp-It® Kit Two Clamp-It Assembly Squares and four 5" Clamp-It Bar Clamps. 69954 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 52.99 Deluxe Clamp-It® Kit Four full sets, including two Clamp-It Assembly Squares, four 5" Clamp-It Bar Clamps, two Mini Clamp-It Assembly Squares, and four 4" Mini Bar Clamps 69970 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 74.99

Adjustable Clamp-It® Assembly Tool Now you can align it, clamp it and fasten it at 90º and multiple angles. Easily adjusts to set any angle in 5º increments from 45º to 315º. 36 teeth lock in your angle. Works with any joinery technique. 8" x 8" x 11/2" high-impact, rigid polycarbonate. Patent pending. Bar clamps sold separately. 33586 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 ea.

45°

60°

90°

120°

135°

180°

225°

240°

270°

315°

Rockler Clamp-It® Corner Clamping Jig Firmly holds panels at a precise right angle, freeing up your hands so you can drive fasteners. Requires the Clamp-It (29190, sold separately), which is screwed to the jig. Dual clamps with soft pads to prevent marring. Mounting holes in the jig allow attachment to work surface. Durable glass-filled polycarbonate construction. Maximum panel thickness is 1". Drilling of 3/8” holes may be required in older Clamp-Its for use with this product. 58918 . . . . . . . . .$ 29.99 ea. 4 or more $ 26.99 ea.

Need an extra hand? How about four! Firmly hold panels at a precise right angle!

Clamp-It® Assembly Square 8" x 8" x 11/2". 29190 . . . . . . . .$ 12.99 ea. 4 or more $ 11.69 ea.

3-W Excepface fthese very dNon-measy tclear (pane 39062

Bar Clamps sold separately below

ClamAsseSquaUnivClam Ideal assemand bSquarseriesto accthe UClampClampClamp 44117

Mini Clamp-It Assembly Square with Mini Bar Clamp

ONLINE VIDEO!

Align it, clamp it and fasten it!

Clamp-It Assembly Square

BessInsta Holdsperfecand sdrill gthen sscrewwide felt pa 56018 Mini Sure-Foot® Conversion Kit

Provides a stable base for your Clamp-It Bar Clamps—screw the brackets down to create jigs and fixtures. Added height provides more knuckle clearance when tightening the clamp. Two sliding spacer attachments slip onto the bar to center thin stock between the jaws. Storage hook lets you hang the clamp. Compatible with Clamp-It Bar Clamps only (#61003, #35335 and #36153). 55952 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.99

Clamp-It® Bar Clamps 61003 5" Bar Clamp . . . . . . . . . . . . . . . . . . . . . . .$ 7.99 ea. 35335 8" Bar Clamp . . . . . . . . . . . . . . . . . . . $ 9.99 ea. 36153 12" Bar Clamp . . . . . . . . . . . . . . . . . $ 10.99 ea.

29190

58918

46

Clamp-It® Assembly Squares

800-279-4441

Clamp-It Adjustable Assembly Tool with Bar Clamp

Clamp-It Assembly Square with Universal Fence Clamp


01312018161941

mp-It

52.99

ares,

74.99

ock " nt

9 ea.

45°

60°

90°

120°

135°

Rockler® 3-in-1 Bar Gauge Check diagonals for square, transfer dimensions, or draw perfect circles with a single tool! Three sets of interchangeable tips—at a fraction of the price of similar bar gauges. Use 3/8" dowel stock (not included) in whatever length you need. Beam compass/trammel points work with standard pencils or pens. Durable aluminum body. Large knurled knobs for easy adjustment.

53052 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99 3/8" x 36" Dowels Each 10 + 20743 Birch . . . . . . . . . . . . . . . . .$ .99 . . . . . . . . .$ .89 20933 Oak . . . . . . . . . . . . . . . . . .$ 2.49 . . . . . . .$ 2.24 21006 Walnut . . . . . . . . . . . . . . .$ 3.99 . . . . . . .$ 3.59

Removable jaw caps

★Special shipping charges apply. Ask for specific charges when ordering. Bessey K Body REVO Jr. Parallel Clamp Slightly smaller throat depth (31/4") than the full-size Revo but still delivers 900 lbs. of high-pressure clamping, even at 90°. 45370 12" . . . . . . . . . . . . . . . . . . $ 29.99 47808 18" . . . . . . . . . . . . . . . . . . $ 32.99 45988 24" . . . . . . . . . . . . . . . . . . $ 34.99

Bessey K Body REVO Parallel Clamps For high pressure clamping (1500 lbs), 90º clamping, and powerful spreading. Improves on the original K Body with a more comfortable Power Grip handle and a convenient quick-release mechanism — just lift the handle. Workpiece supports provide a stable base and protect your work. Compatible with K-P blocks. 33/4" throat depth. 24169 12" Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99 53536 18" Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 41.99 21860 24" Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 44.99 25629 31" Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 45.99

21764 40" Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 49.99 20133 50" Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 54.99 ★ 20747 60" Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 64.99

3-Way Face Clamp Exceptionally adjustable clamps for clamping face frames to carcasses, and for edging shelves. Since these clamp to the front edge of panels, they work with very deep cabinets, even if the back is already attached. Non-marring pads. Light weight and compact, they're easy to move around and store. Clamp opens enough to clear a 5" wide frame (panel centered) or 3" wide frame (panel flush with edge). Patent Pending. 39062 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 37.99

ONLINE VIDEO!

Clamp-It® Assembly Square with Universal Fence Clamp Kit Ideal for drawer assembly, deck rails and bench jigs. Square features a series of 3/8" holes to accommodate the Universal Fence Clamp. Includes one Clamp-It Assembly Square and two Universal Fence Clamps. 44117 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99 pk.

Universal Fence Clamps Innovative clamps hold shopmade fences to table saws, band saws, cutoff saws, router fences and more. Use individually as stop blocks, or in pairs for sacrificial fences, half-fences, resaw fences, and a variety of other fixtures. Range of travel: 1/2"- 53/4" (1/2" minimum assumes a 3/4" auxiliary fence; you can clamp to an even thinner primary fence if you use a thicker auxiliary fence). 31373 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99 pr.

ONLINE VIDEO!

Parallel Clamp Blocks Form accurate, easy-to-assemble clamping fixtures. Four blocks per pack. 38399 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.99 pk.

47109 36" . . . . . . . . . . . . . . . . . . $ 39.99 47765 50" . . . . . . . . . . . . . . . . . . $ 45.99

Bessey K Body REVO Jr. Parallel Clamps Bessey K Body

REVO Parallel Clamps

Parallel Clamp Blocks

ONLINE VIDEO!

Bessey BES5811 Cabinet Installation Face Frame Clamp Holds face frames of two cabinets perfectly flush while you drill pilot holes and screw the cabinets together. Integral drill guide lets you drill the pilot hole, then swings away so you can drive the screw. Accepts stiles from 11/2" to 2" wide and up to 11/4" thick. Non-marring felt pads included. 56018 . . . . . . . . . . . . . . . . . . . . . . $ 24.99

B Slde454745

FospPolifyo24532125

PFo38

47

Clamps – Cabinet Building

rockler.com


01172018112736

Piher ZMM F-Style Piston Clamps Screw threads are enclosed for protection against glue, dust and impacts—generates up to 900 lbs of clamping force. Beech handle. 23/4" throat depth. Lifetime Guarantee. Made in Spain. 58360 6" Clamp . . . . . . . . . . . . . $ 21.99 59377 8" Clamp . . . . . . . . . . . . . $ 23.99 55207 Clamp Pads . . . . . . . . . . . . $ 2.99

Rockler F-Style Piston Clamps by Piher Ingenious double-threaded piston system produces faster clamping speed and more pressure with the same degree of rotation. Upper threads are encased in a metal cylinder, shielded from glue and dust. Piston head does not spin as it advances, so twisting forces that could cause misalignment or marring are virtually eliminated. Generates over 2000 pounds of pressure. Cold rolled steel bar. Handle pivots to generate more torque. Lifetime guarantee. 51552 16" Clamp . . . . . . . . . . . . $ 39.99 57297 24" Clamp . . . . . . . . . . . . $ 44.99

58076 32" Clamp . . . . . . . . . . . . $ 54.99 51519 Clamp Pads, Pair . . . . . . . $ 2.99

Enclosed, double-threaded piston head speeds clamping and prevents glue clogs

Piher Maxipress F-Style Piston Clamps Dual-threaded screw generates 40% more power and closes the clamp 50% faster than an ordinary F-clamp. Totally enclosed threads keep out dust and glue. Clamp foot advances without rotating, minimizing twisting torque that could cause misalignment or marring. Handle locks into place at 90° in both directions for increased torque. Grooved jaw heads for clamping round items. Spring-assisted brake prevents jaw from sliding around inadvertantly. Produces 2,250 pounds of pressure. Cold rolled steel bar. Lifetime guarantee. 56732 16" Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 47.99 52578 24" Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 54.99 53037 32" Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 59.99 53317 40" Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 69.99 51519 Clamp Pads, Pair . . . . . . . . . . . . . . . . . . . . . . .$ 2.99

SurePipeConv Conve3/4" the saRocklSure- 69092

BencClam Innovsecurstandclampdoors 35359

ON VI

IrwiSL30 Swivepad csurfacchangjaw tclampthe pBar wpress

Bessey Professional Series F-Style Clamps TG Professional Series clamps have two-part composite handles and protective caps on both jaws. Throat Clamping Force Depth Capacity (lbs.) 25458 . . . . . . . . . . . . 21⁄2" . . . . . . . . . . . 24" . . . . . . . . . . . 600 . . . . . . . . . . . $ 16.99 43957 . . . . . . . . . . . . . 4" . . . . . . . . . . . . . 8". . . . . . . . . . . . 880 . . . . . . . . . . . $ 22.99 22065 . . . . . . . . . . . . 51⁄2" . . . . . . . . . . . 12" . . . . . . . . . . 1320 . . . . . . . . . . $ 36.99 24807 . . . . . . . . . . . . 51⁄2" . . . . . . . . . . . 24" . . . . . . . . . . 1320 . . . . . . . . . . $ 39.99 21887 . . . . . . . . . . . . . 7" . . . . . . . . . . . . 16" . . . . . . . . . . 1320 . . . . . . . . . . $ 39.99

Sure-Foot® F-Style Clamps Premium features and value make this Sure-Foot clamp from Rockler your main squeeze for F-Style clamps. The no-tip stability of the Sure-Foot base leaves two hands free for easy positioning and clamping. Castings feature larger clamping faces, which are machined smooth for less risk of marring. Thick, comfortable handle provides enough leverage for the most rigorous of clamping tasks. 21/2" throat depth. 40333 6" . . . . . . . . . . . . . . . . . . . $ 16.99 40334 12" . . . . . . . . . . . . . . . . . . $ 18.99

40335 18" . . . . . . . . . . . . . . . . . . $ 19.99 40339 24" . . . . . . . . . . . . . . . . . . $ 20.99

ONLINE VIDEO!

Clamp Pads for Piher Maxipress and Rockler F-Style Piston Clamps Fits Piher Maxipress and Rockler F-Style Piston Clamps. Helps to eliminate denting and marring. Tight friction-fit. 51519 . . . . . . . . . . . . . . . . . . . . $ 2.99 pr.

Dam Sandwwhilepresstable panel41/2" a powthrea 51792

48

Clamps – F-Style

800-279-4441

Enclosed, double-threaded piston head speeds clamping and won't clog

Flip-uplever-style

handle

Piston head doesn't spin, reducing slipping and marring

Cold-rolled steel bar adds strength


01172018141202

. tee.

21.99 23.99 $ 2.99

ore l so

d.

54.99 $ 2.99

Rockler® Pipe Clamp Mounting Brackets Attach to a standard 3/4" I.D. pipe clamp, then slip over a 2x4 sawhorse to create a stable workholding vise. Clamping assembly swings out of the way when not needed. Screws are included for more secure installation if desired. Steel construction. 54725 . . . . . . . . . . . . . . . . . . . . . . $ 37.99

Built-in clamp hook allowsconvenient wall hanging.

Mounting holes allow the addition of cauls, pads, etc.

The Sure-Foot base prevents tippingover during glue-ups.

OursTheirs

Broad base prevents "domino-effect" tipping!

Taller jaws work great with our Pipe Clamp Bench Blocks

ONLINE VIDEO!

You won't rap your knuckles with this clamp's higher base.

Sure-Foot® Plus 3/4" I.D. Pipe Clamp With 21/4" high jaws - a half inch higher than standard pipe clamps - this clamp features a four clutch-plate design to ensure a secure, no-slip lock for the tail stock on standard 3/4" pipe. Patent pending. Pipe not included. Sure-Foot Plus Clamp Pads (sold separately) slip on to protect against damage to wood and projects. 30921 Sure-Foot Plus 3/4" I.D. Pipe Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 18.99 ea. 39897 Sure-Foot Plus Clamp Pads, 4-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.99 pk.

Sure-Foot® Pipe Clamp Conversion Pads Convert your old 3/4" pipe clamps to the same height as Rockler's wide-base Sure-Foot design. Two per package. 69092 . . . . . . . . . . . . . . . . . . . . $ 4.99 pk.

Bench Block® Pipe Clamp Stabilizers Innovative stabilizers securely hold four standard 3/4" pipe clamps at 90º for assembly of doors or frames. Set of four. 35359 . . . . . . . . . . . . . . . . . . . $ 37.99 pk.

ONLINE VIDEO!

Sure-Foot® Aluminum Bar Clamps Features an extra wide 21/2" foot for exceptional stability and a higher base that raises bar 11/2" above the table for excellent handle clearance. A built-in clamp hook locks onto a 3/4" board, eliminating need to "clamp the clamp" when hanging on a wall. 41812 24" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99 ea. 41815 36" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99 ea. 41816 48" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 44.99 ea. 41817 60" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 54.99 ea.

ONLINE VIDEO!

Irwin® Quick-Grip® SL300 Clamps Swiveling clamp pad conforms to angled surfaces. Quick-change reversible jaw transitions from clamping to spreading with the push of a button. Heavy-duty I-Beam Bar withstands up to 300 lbs. of clamping pressure without bending or flexing.

27853 12" . . . . . . . . . . . . . . . . . . $ 27.99 27876 24" . . . . . . . . . . . . . . . . . . $ 31.99

“ These clamps are great! They tighten as tight as I want without slipping and are excellent for cases where I only have one free hand to apply the clamp.”

Adam, from Fremont, NE

ps on

16.99 22.99 36.99 39.99 39.99

Damstom 38" Panel Clamp Sandwiches panels to hold them flat while drying—no more bowing when pressure is applied. Ideal for clamping table tops and thick bench tops. Clamps panels from 3/4" thick to a massive 41/2" thick. Constructed from steel with a powder-coated blue finish and Acme thread. Sold singly. 51792 . . . . . . . . . . . . . . . . . . . $ 59.99 ea.

Bessey I-Beam Bar Clamps Sturdy I-beam minimizes deflection and panel bowing—perfect for gluing up large panels and table tops. Nickel-plated steel bar for exceptional strength and resistance to corrosion. Cast iron sliding head uses four clutch plates that firmly grip the bar stock. Threaded screw with large, sturdy handle. Castings are powder-coated. 50303 36" . . . . . . . . . . . . . . . . . . $ 44.99 51810 48" . . . . . . . . . . . . . . . . . . $ 49.99 53263 60" . . . . . . . . . . . . . . . . . . $ 54.99

49

Clamps – Bar/Pipe

rockler.com

ad

and g

teel ngth


01172018141202

Pack Not justoraganyweight 21834

He

Rockler® Bandy Clamps One easy squeeze is all it takes to clamp a wide variety of profiles, hold cords and hoses out of your way, and so much more! Just open the clamp and stretch the durable rubber tension band over your material—the deeper you set it, the tighter the pressure. The flexing of the band allows clamping of unique profiles and irregular shapes. Jumbo anti-slip pads hold the clamp in place without marring, even on finished surfaces or delicate materials like white pine. Patent pending. Large, 25/8" Max. Opening Wide capacity for thick moldings and 2x4 construction. 54141 . . . $ 24.99 pair $ 19.99 3 + pair s Medium, 2" Max. Opening Ideal for most projects using 3/4" stock. 54258 . . $ 19.99 pair $ 16.65 3 + pairs Small, 11/4" Max. Opening For thin stock, delicate moldings and crafts. 57823 . . . $ 14.99 pair $ 13.33 3 + pairs

Buy 3 pairs of any size and SAVE!

SmallMediumLarge

See Bandy Clamps in action at rockler.com

Wooden Handscrew Clamps Classic design lets you offset and/or angle jaws to keep parts from shifting. Solid steel clamping elements with hardwood jaws and handles. Maximum jaw openings: 45/8" for 8" clamps; 61/8" for 10" clamps, 81/4" for 12" clamps. 30400 8" . . . . . . . . . . . . . . . . . . . $ 14.99 30075 10" . . . . . . . . . . . . . . . . . . $ 16.99 30800 12" . . . . . . . . . . . . . . . . . . $ 19.99 Clamp Handle Grips Add comfort and better grip to your hand clamps. One size fits most K-body, F-style and Rockler hand screw clamps. Easy to install. Contains four grips. 39105 . . . . . . . . . . . . . . . . . . . . $ 5.99 pk.

3080039105

Rockler® Perfect Fit Dado Jig Works perfectly with the All-in-One Clamp Guide. Cut tight dados to fit stock from 1/2" to 1" thick with only a 1/2" straight bit and this smooth-sliding jig. Infinitely adjustable within that range, it's perfect for thin plywood—no need to buy undersized bits. Set your thickness, run the first shoulder with one edge of the jig riding in the channel of the guide then flip the jig around and run the other shoulder. 59443 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 44.99

Items with a star ★ are oversize and special charges apply.

All-in-One Clamp Guides Wide handles and a click-lock sliding jaw make it simple to set these clamps for use as an edge guide for circular saws and routers and as a fence. Low 9/16" profile body and flat top allow many applications without obstructing tools. Easy-to-read color measuring scales. Onboard T-Tracks fit select clamp accessories, sold separately. 217/32" wide. 32439 24" Opening . . . . . . . . . $ 41.99 39745 36" Opening . . . . . . . . . $ 44.99

32777 50" Opening . . . . . . . . . $ 45.99 ★ 34209 99" Opening . . . . . . . $ 114.99

ONLINE VIDEO!

Bessey Variable Angle Strap Clamp Fast, precise clamping of round or irregularly shaped objects with angles from 60º - 180º. Pulls from both ends of strap to eliminate distortion. Integral reel keeps 1" x 23' strap neatly stored. 50470 . . . . . . . . . . . . . . . . . . . . . . $ 44.99

Rockler® Band Clamp Provides uniform pressure on chairs, boxes, frames and a wide variety of oddly shaped, hard-to-clamp objects. Durable nylon band with herringbone weave won't stretch under tension. Ratcheting handle and band is stitched to the ratchet post to further reduce slippage. 1"W x 15'L. For clamping only. Not suitable for securing loads. Use the Band Clamp Kit for tidy storage of the band and for alignment and protection of corners during clamp use. 58432 Band Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99 56025 Band Clamp Kit (No-Mar Pad Retainer and 4 Corner Cauls) . . . . . . . . .$ 7.99

56025

58432

58432

Shown with Band Clamp Kit 56025 10-Piece Woodworker's

Spring Clamp Set Tired of spring clamp sets loaded with sizes you're unlikely to use? This 10-piece spring clamp set has woodworkers' needs in mind. It's an assortment of sizes – four 3" capacity clamps, four 2" capacity clamps and two 1" capacity clamps. Clamps are made from high-strength nylon with glass fiber for durability. Pivoting jaw pads accommodate a variety of angles. 47817 . . . . . . . . . . . . . . . . . . . . . . $ 17.99

BLOKKZ Universal Clamping Blocks These clever aluminum blocks feature a circular clamping surface that allows force to be applied at any angle, and with pinpoint precision. They'll handle virtually any miter, and difficult joints like scarf joints and long bevels. They're also perfect for large assemblies where your longest clamp is too short. Includes two neoprene pads for extra grip and scratch protection. 43805 . . . . . . . . . . . . . . . . . . . $ 24.99 pr.

35430 Squaring Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 26.99

All-in-One Clamp Guide

Perfect Fit Dado Jig

Quic NeatlclampClamp 48605

Fu

Four

Pac

50

Clamps – Specialty

800-279-4441


01172018141703

Pack Rack® Tool Storage System Not just a clamp rack - this is a full service mobile work station and storage solution. Load it down with clamps and supplies and roll it easily anywhere in the shop. Solid steel construction. Holds clamps up to 48" long. Includes eight 241/2" rods. Optional 381/2" rods supply 14" of additional tool-hanging space. 21834 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 169.99

ONLINE VIDEO!

Rockler® HD Clamp Rack for Wall Mounting Turn stacks of clamps into an organized arsenal! This heavy-duty rack holds up to 12 pipe or parallel clamps, each up to 60" long. Its compact footprint saves both wall space and floor space. 12 gauge galvanized steel construction. Mounting hardware not included. Made in USA. 57164 . . . . . . . . . . . . . . . . . . . $ 39.99 ea.

Heavy-duty clamps need a heavy-duty rack!

ng.

mum 61/8" s. 4.99 6.99 9.99

hand F-style sy to

9 pk.

n ity d two de

ds

7.99

ure ws d dle ts ey're ere udes

nd

9 pr.

More HD Clamp Rack details at rockler.com/hdrack

Rockler Clamp Racks for Pack Rack or Wall Mounting Galvanized steel racks organize and store a variety of clamps. All racks come pre-drilled 16" on center for quick and easy mounting to wall studs. The four below have slotted holes for attachment to the Pack Rack (21834, sold separately). Made in USA.

F-Style Clamp Rack Store up to 15 F-clamps neatly at a central location. 243/8" overall length. 34302 . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Quick-Release Bar Clamp Rack Neatly packs up to 15 quick-release bar clamps into a space only 243/8" long! Clamp pads hook securely over the back. 48605 . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Parallel Clamp Rack Holds all brands of parallel clamps – up to 12 in all – for easy and convenient storage. 24" overall length. 38498 . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Pipe Clamp Rack With nine slots, it has plenty of space for pipe clamps and aluminum bar clamps. 245/8" overall length. 33547 . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Full-service mobile work station and storage solution!

Hang clamps on both sides!

Wood shelves not included

Add shelves,sold

separately (20873)

58" high

Powder coated with sand finish

Polyurethane casters

Four options (available below) for Clamp Racks fitting the Pack Rack

Additional Clamp Rods for Pack RackCreate additional clamp-holding capacity. 22130 241/2" Rods (2-Pack) . . . . $ 12.99 20303 381/2" Rods (2-Pack) . . . . $ 15.99 Shelf Hooks for Pack RackAllow for more catchall interior storage. 20873 Shelf Hooks (4-Pack) . . . . $ 7.99 Top Cap Frame for Pack RackMounts to the top of your Pack Rack to create more storage space. Wood bottom not included. 25020 . . . . . . . . . . . . . . . . . . . . . . $ 15.99

2213020303

20873

Pack Rack Accessories

Parallel Clamp Rack 38498 (full)Parallel

Clamp Rack 38498

Top Cap Frame 25020

51

Clamps – Storage

rockler.com


01172018141703

SI = S

BlaCate

PremFus

GenPurp

Com

Stacchipb

Cros

R

Plywmela

Trasa

Lamimela

ComCombGenecrosscplywo

PremThe bmarketeeth finish

LaseFreudnoise desig

PermA statotherstandThe nwarp reducsaw's

Urethane Band Saw Tires Won't dry rot and stays flexible longer for better blade performance! Easy installation, simply stretch to fit - no gluing necessary. Sized to fit 12" or 14" saws. Pair. 46008 12" x 3/4" . . . . . . . . . $ 44.99 pr. 49047 12" x 7/8" . . . . . . . . . $ 44.99 pr. 23860 14" x 1" . . . . . . . . . . . $ 44.99 pr.

Olson® Thick Wood 5" Scroll Saw Blade The first scroll saw blade specially designed to cut through thick wood cleanly. Excellent for hard or soft wood — even multiple layers — from 3/4" to 2" thick. Hardened and tempered teeth guarantee a long-lasting blade. Unpinned ends. 12 per package. 23951 . . . . . . . . . . . . . . . . . . . . . . . $ 5.99

Band Saw Blades

80" Blades 99649 1/8" x .025 x 14 regular . $ 16.99 99665 3/16" x .025 x 4 skip . . . $ 16.99 99681 1/4" x .025 x 6 skip . . . . $ 16.99 99706 3/8" x .025 x 4 skip . . . . $ 16.99 99722 1/2" x .025 x 3 hook . . . $ 16.99 931⁄2" Blades 99657 1/8" x .025 x 14 regular . $ 19.99 99673 3/16" x .025 x 4 skip . . . $ 17.99 99699 1/4" x .025 x 6 skip . . . . $ 19.99 99714 3/8" x .025 x 4 skip . . . . $ 19.99 99730 1/2" x .025 x 3 hook . . . $ 17.99

Kreg® Precision Band Saw Fence Features precision magnified lens cursor and solid, extruded aluminum fence with dovetail bracket design. Fits most band saws. Optional resaw guides provide control when adjusting for band saw blade drift. Micro-Adjuster sold separately. 26186 Kreg Band Saw Fence . $ 107.00 28208 41/2" Resaw Guide . . . . . $ 17.99 28279 7" Resaw Guide . . . . . . . $ 19.99 21639 Micro-Adjuster . . . . . . . . $ 14.99

21639

28208

26186

Olson® All Pro Band Saw Blades Superior blades, affordably priced! Unlike flex-back bands, these low-tensioned, milled blades feature a hard back that travels up to 6,000 SFM. Exclusive material offers strength and durability. 123" fits JET 16" band saws

931⁄2" fits most 14" Delta, Jet, etc. 22382 1/8" x 14 regular . . . . . . $ 19.99 22394 3/16" x 10 regular . . . . . $ 19.99 22403 1/4" x 6 hook . . . . . . . . . $ 19.99 22412 1/2" x 3 hook . . . . . . . . $ 22.99 22553 5/8" x 3 hook . . . . . . . . $ 24.99

105" fits most 14" band saws (Delta, Jet, Sears, etc.) with risers 22420 1/8" x 14 regular . . . . . . $ 24.99 22429 3/16" x 10 reg. .025 . . . . $ 24.99 22440 1/4" x 6 hook .025 . . . . $ 24.99 22451 1/2" x 3 hook .025 . . . . . $ 24.99 22563 5/8" x 3 hook .025 . . . . . $ 24.99

Olson® All Pro Band Saw Blade Assortment, 931/2" Resaw your lumber into thin boards or veneers with the sturdy 5/8" blade. Cut thin stock and intricate scrollwork with the 3/16" blade. The 1/4" blade is a great workhorse blade for general purpose work. Fits 14" saws. Three blade set. 21019 . . . . . . . . . . . . . . . . . . . $ 49.99 pk.

123" fits JET 16" band saws 21405 3/16" x 10 regular 025 . . $ 29.99 28221 5/8" x 3 hook .025 . . . . . $ 29.99

Carter Band Saw Guides The ultimate in precision and durability, these bearings last indefinitely and require very little maintenance. Adjustable from 1/8" to 1" blade width. Fully sealed and lubricated. Kit includes all mounting hardware plus complete installation instructions. 39360 For Jet Saws . . . . . . . . . $ 179.99 39373 For Delta Saws . . . . . . . $ 179.99

Ceramic Guide Blocks Outlasts any other guide block! Made of Aluminum- Oxide, the same material used to make ceramic products for NASA, these blocks reduce friction to provide a cooler running blade and truer tracking. Tolerance of +/- .005. Fits 14" band saws. 26696 For Jet Saws . . . . . . . . . . $ 27.99 26687 For Delta Saws . . . . . . . . $ 27.99

Olson® Cool Blocks® for Band Saws Replace your standard upper and lower blade guides for cooler, quieter and longer lasting blades. Made in USA from non-metallic composite material. Four blocks per set. 25997 For 14" Jet, Grizzly, General, Reliant, Craftsman . . . . . . . . . . . $ 17.99 29699 For 14" Delta . . . . . . . . . $ 17.99

72" Blades 22331 1/8" x .025 x 14 regular . $ 14.99 22342 3/16" x .025 x 4 skip . . . $ 14.99 22354 1/4" x .025 x 6 skip . . . . $ 14.99 22802 3/8" x .025 x 4 skip . . . . $ 14.99 22372 1/2" x .025 x 3 hook . . . $ 14.99

Regular Skip Hook

Premium Band Saw Blades Unmatched versatility, with a hard edge flex-back design. Use 72" blades for Shopsmith-style saws, 80" blades for 12" Craftsman saws and 931/2" blades for Delta, Rockwell, Jet, Grizzly and similar 14" saws.

Starrett Dual Cut Jig Saw Blades Bi-metal technology and an exclusive pattern of teeth in both directions give you a burr-free cut on both sides of the stock. Compatible with most major jig saw brands. 2 blades per pack. 47151 2" x 3/16" x .050" . . . $ 9.99 pk.

Olson PGT Scroll Saw Blade Assortment Olson's Precision Ground Teeth (PGT) scroll saw blades are the finest on the market - they outperform and outlast all other blades! Assortment pack includes six each of #5, #7 and #9 blades. 20846 . . . . . . . . . . . . . . . . . . . . . . $ 14.99

Zero Clearance Band Saw Inserts Reduce tear-out with these snap-in, semi-rigid plastic inserts. Delta inserts are 21/2" overall x 23/16" to the lip. Jet inserts are 21/2" overall x 13/4" to the lip. Sold in sets of 5. 21958 Jet (5) . . . . . . . . . . . . . . . $ 10.99 25655 Delta (5) . . . . . . . . . . . . . $ 10.99

AccuRight Circle Band Saw Jig Cut perfect circles every time! Jig installs quickly with included bracket to almost any saw for repeatable accurate circle cuts for clocks, coasters, toy wheels, and more. Circles up to 48" in diameter are possible when you provide proper external support. 33981 . . . . . . . . . . . . . . . . . . . . . . $ 69.99

52

Band Saw Accessories

800-279-4441


01172018141819

SI = Silver I.C.E. PS = Perma-Shield TCG = Triple Chip Grind Flat = Flat Tooth ATB = Alternating Top Bevel Hi-ATB = High Alternating Top Bevel Comb. = Combination

Blade Category Freud Model Size Kerf

Tooth count, type, hook Coat

Expected cut quality by operation:Saw type/special use

StockNumber PriceRip cut Crosscut Chipbd. Plywood Laminate

PremierFusion

General Purpose

P410T 10" Thin 40, Hi-ATB, 18° PS Excellent Excellent NR Excellent Excellent Table saw <3hp. Great results in all cuts. 30948 $ 79.97

P410 10" Full 40, Hi-ATB, 18° PS Excellent Excellent NR Excellent Excellent Table saw 3hp+. Great results in all cuts. 20141 $ 99.97

ComboLU83R010 10" Thin 50, Comb., 10° PS Good Good Good Good Fair Table saw <3hp. Crosscutting and ripping. 28800 $ 59.97

LU84R012 12" Full 60, Comb., 10° PS Good Good Good Good Fair Table saw 3hp+. Crosscutting and ripping. 21613 $ 109.97

Stacked chipboard LU82M010 10" Full 60, TCG, 10° SI Good Good Good Fair Fair Table saw 3hp+.

Heavy-duty sheet-good cutting. 62799 $ 69.99

Crosscut

LU74R010 10" Thin 80, ATB, 10° PS Fair Excellent Good Good Fair Table saw <3hp and non-sliding miter saw. Extra-fine crosscutting. 26983 $ 71.47

LU91R010 10" Thin 60, ATB, -5° PS Fair Excellent Fair Fair Good Sliding miter and radial arm saws. 26972 $ 71.47

LU91R012 12" Thin 72, ATB, -5° PS Fair Excellent Fair Fair Good Sliding miter and radial arm saws. 29024 $ 87.97

LU85R012 12" Full 96, ATB, 10° PS Fair Excellent Good Good Fair Table saw 3hp+ and non-sliding miter saw. Extra-fine crosscutting. 21627 $ 129.97

LU85R010 10" Full 80, ATB, 10° PS Fair Excellent Good Good Fair Table saw 3hp+ and non-sliding miter saw. Extra-fine crosscutting. 64600 $ 89.97

LU88R010 10" Thin 60, ATB, 15° PS Good Excellent Good Good Fair Table saw <3hp. Fine crosscutting. 25535 $ 59.97

LU73R010 10" Full 60, Hi-ATB, 10° PS Fair Good Fair Good Fair Table saw 3hp+ and non-sliding miter saw. Production cabinetmaking. 56831 $ 77.97

LU91R008 81⁄2" Thin 48, ATB, -5° PS Fair Excellent Fair Fair Good Sliding miter and radial arm saws. 22205 $ 63.97

Rip

LU87R010 10" Thin 24, Flat, 20° PS Excellent Good Fair Good Fair Table saw <3hp. General ripping. 64618 $ 43.47

LM74R010 10" Full 30, TCG, 12° PS Excellent Fair Fair Fair Fair Table saw 3hp+. Ultrasmooth glue-line ripping. 64078 $ 69.97

LM75R010 10" Thin 30, TCG, 12° PS Excellent Fair Fair Fair Fair Table saw <3hp. Ultrasmooth glue-line ripping. 28768 $ 59.97

LM72R010 10" Full 24, Flat, 20° PS Excellent Fair Fair Fair Fair Table saw 3hp+. Heavy-duty ripping. 13120 $ 64.47

Plywood/ melamine

LU79R007 71⁄4" Thin 60, Hi-ATB, 2° PS Fair Excellent Good Excellent Excellent Circular saw. 42000 $ 54.97

LU79R010 10" Thin 80, Hi-ATB, 2° PS Fair Excellent Good Excellent Excellent Table saw <3hp. 64085 $ 79.97

LU80R010 10" Full 80, Hi-ATB, 2° PS Fair Excellent Good Excellent Excellent Table saw 3hp+. 25419 $ 94.47

Track saw

LU87R006M20 160mm Thin 14, ATB, 20° PS Excellent Good Fair Good Fair Track saw. Ripping. 41993 $ 32.97

LU79R006M20 160mm Thin 48, Hi-ATB, 5° PS Fair Excellent Good Excellent Excellent Track saw. Cutting sheet goods. 41995 $ 52.47

LU86R006M20 160mm Thin 28, ATB, 12° PS Good Good Fair Fair Fair Track saw. General-purpose cutting. 41994 $ 41.97

Laminate/ melamine

LU97M010 10" Full 80, TCG, -3° SI Fair Good Good Good Excellent Table saw 3hp+ and non-sliding miter saw. Clean edges on both laminate faces. 49195 $ 94.97

LU96R010 10" Thin 80, TCG, -3° PS Fair Good Good Good Excellent Table saw <3hp. Clean edges on both faces. 23278 $ 76.97

LU97R010 10" Full 80, TCG, -3° PS Fair Good Good Good Excellent Table saw 3hp+. Clean edges on both faces. 24197 $ 104.47

Combination/General-Purpose Blade?Combination blades are designed to crosscut and rip. General-purpose blades deliver exceptional results in crosscuts and rips, as well as in most cuts involving plywood, laminated wood and melamine.

Premier Fusion General Purpose BladesThe best-performing general-purpose blades on the market. These flagship blades have unique 30° Hi-ATB teeth with double-side-grind geometry for a mirror-smooth finish and chip-free top and bottom edges in all cut types.

Laser cut anti-vibration ventsFreud’s anti-vibration design stabilizes the blade to reduce noise and chatter for a flawless finish and longer life. The design eliminates the need for any additional stabilizers.

Perma-SHIELD® CoatingA state-of-the-art coating formulation superior to any other. Perma-SHIELD® coated blades run cooler than standard polished blades, resulting in longer run time. The nonstick coating reduces blade drag, binding, blade warp and pitch and resin buildup, leading to longer life, reduced down time for cleaning and less stress on your saw's motor.

Freud® Saw Blade Guide

Tri-metal brazingUsed for all blades, Freud's innovative process bonds the carbide tips to the Premium Hard-Core™ Steel blade body. This method involves sandwiching a layer of copper alloy between layers of silver alloy to provide extra flexibility and impact resistance.

TiCoTM Hi-Density Carbide Provides a sharper edge and flawless finish with a dramatically longer cutting life on all Freud blades. A proprietary combination of titanium, tungsten and cobalt, it features sub-micro grains that are smaller and more consistent than those of standard carbide.

Anti-Vibration Vents

Full or Thin Kerf Blade DesignThe most technologically advanced

blade on the market!

Perma-SHIELD® Coating

ence ursor

ost

band

07.00 7.99 9.99 4.99

39

al

ade

de. rk e ral

9 pk.

9.99 9.99

Kit s

79.99 79.99

53

Saw Blades

rockler.com


01172018141819

Tape Avoidcuts. indexdown3/8" xlegs, 21597

Heav Desigx 3/8your sback The wfine-tand s 29840

Rock Leverscale,hold dsaw bPlatfo 33113

Rock Providwith s 37541

Freud Box Joint Cutter Set Fast setup for precise 1/4" and 3/8" joints without shims or adjustments! Unique tooth design delivers clean cuts through end grain. Cuts perfectly square pins and flat-bottomed slots. 8" dia., 5/8" arbor. Carbide teeth. For use with table saw only. Max. RPM 9,000. Includes storage case and instructions. 27371 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 94.97

Freud Super Dado Sets Especially good for laminates and veneered plywoods! Cut chip-free dadoes, slots, grooves and rabbets using table saws or radial arm saws. 3/32" chipper included for undersized plywood. Both 6" and 8" sets include (4) 1/8", (1) 3/32" and (1) 1/16" chippers. 5/8" arbor. 21669 6", SD506 . . . . . . . . . . . . . . . . . . . . . . . $ 183.47 21697 8", SD508 . . . . . . . . . . . . . . . . . . . . . . . $ 199.97

Saw Blade/Router Bit Cleaning Kit Jumbo-sized blade bath features raised inner ring, preventing blades suctioning to the bottom. 14" inside diameter accepts 12" blade. Tight-fitting lid lets you store solution for re-use. Includes blade bath/lid, 1 quart Pitch and Resin Remover (makes 1 gallon), brass scrub brush and a 6 oz. plastic jar/lid for router bits. 34895 Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 27.99 64956 Pitch and Resin Remover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 15.99 47316 Brass Brush only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.99

Oshlun 6" and 8" Stack Dado Sets Make perfect flat-bottom cuts! Choose from 6" x 30 tooth set and 8" x 42 tooth set. 5/8" arbors. Each includes two 1/8" thick kerf outside saws, six 5-tooth full-body chippers (four 1/8", one 1/16" and one 3/32") and eight shims. Dado range is 1/4" to 29/32". 21947 6" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 84.99 21975 8" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 104.99

Forrest Woodworker II Blade Get a smooth-as-sanded surface! Rips and crosscuts hardwoods up to 2" thick and veneer plywoods without splinters. For table saws. ATB, 20º hook. 69906 10" x 40T, .093 Thin Kerf . . . . . . . . . . $ 139.99 67402 10" x 40T, .125 kerf . . . . . . . . . . . . . . . $ 149.99

Freud 8" Dial-A-Width Dado Set The Dial-A-Width dado performs like a stack ed dado except without shims. The exclusive Dial hub ensures accurate adjustments. Adjusts in .004" increments. Maximum 29/32" cut width. Works easily with right, or left-operating machines. Set includes 2 outside blades, 5 chippers, wrench, carrying case, instructional poster and DVD. 29081 SD608 . . . . . . . . . . . . . . . . . . . . . . . . . . $ 274.97

Rockler Plastic Magnetic Push Stick Inset magnet for convenient storage on the side of your tablesaw. Ergonomic handle with lightweight plastic blade. Angled bird's mouth tip for a comfortable working angle. 12" long. 53015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99

Freud SD208S 8" Dado Set Compatible with most table saws, including SawStop and SawStop Jobsite saws. Cuts clean, flat-bottomed dados in plywood, melamine and solid wood. Includes blades, chippers, spacers and a shim set for microadjustability. Groove width adjustable from 1/4" to 13/16". 58894 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 99.97

Freud Professional Dado Sets Use on all table saws and radial arm saws for cutting slots, grooves, dadoes and rabbets in softwood or hardwood. Each carbide-tipped set includes two outside blades, three 1/8" chippers, and five shims set for micro-adjustability. 5/8" arbor. Produces grooves from 1/4" to 13/16" in 1/16" increments. 21662 6", SD206 . . . . . . . . . . . . . . . . . . . . . . . . $ 86.47

54

Table Saw Accessories

800-279-4441


01172018142235

Cove Cutting Table Saw Jig Custom coves have never been easier! This jig accepts stock up to 7” wide and 11/2” thick, so you can cut huge crown moldings that would otherwise cost a fortune. An ingenious clamping system secures the fences using the table’s 3/4” miter slots, while a featherboard kit provides extra safety, precision and repeatability. 22395 . . . . . . . . . . . . . . . . . . . $ 89.99

Taper/Straight Line Jig Avoid dangerous cutting setups with this perfect system for tricky tapered cuts. Simply set the angle, secure your workpiece and slide it through. A unique indexing system makes setting the angle fast and easy, while two powerful hold-downs add safety and stability. Whether sliding in your miter slot (fits any standard 3/8" x 3/4" miter slot) or up against a fence, it’s great for tapered chair legs, table legs, straight line rips and more. 21597 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 89.99

Heavy-Duty Tenoning Jig Designed to fit any table saw with a 3/4" x 3/8" miter groove, this jig will hold your stock in precise position. Adjustable back stop supports stock from 0º to 45º. The width of the cut is controlled with a fine-threaded adjustment knob. Cast iron and steel. 29840 . . . . . . . . . . . . . . . . . . . . . $ 129.99

45° Miter Sled Perfect miters - no adjustments! Simply cut one piece on the leading face, one on the trailing face, and voilà! Since both pieces reference off a 90° angle, they're sure to fit perfectly. Through-slots in the base let you clamp moldings at table level. Easy to drill to add extended fences and stops. High-impact polycarbonate - durable and low-friction. 3/8" x 3/4" miter bar adjusts for no-slop fit. 71/2" long clamping faces. 31593 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 24.99

37541

33113

Rockler® Table Saw Crosscut Sled Leverage your table saw for perfect crosscuts! Features a huge, arcing protractor scale, nylon set screws in the miter bar, aluminum fence with flip stop and built-in hold down. Sled comes slightly oversized so you can set it to run flush against your saw blade. 233/4" x 233/4" platform for cabinet style saws. Crosscut Sled Drop-Off Platform is sold separately. 33113 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 149.99

Rockler® Crosscut Sled Drop-Off Platform Provides zero-clearance support for safe, splinter-free cuts. 1/2" thick MDF platform with smooth-sliding melamine coating and locking aluminum miter bar. 37541 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 37.99

udes

4.97

30

oth

32". 4.99 4.99

39.99 49.99

ONLINE VIDEO!

ONLINE VIDEO!

E-Z Joint-R Clamp Kit Use a table saw to straighten crooked boards, true-up rough-sawn edges and make shallow taper cuts in one pass. Includes two clamps. Can handle thicknesses up to 11/2". 25725 . . . . . . . . . . $ 24.99

r a

2.99

Rockler® Table Saw Small Parts Sled Cut small parts to length on your table saw—great for dowels, tenon stock and small moldings. Zero-clearance base reduces chance of small parts binding in the throat plate—ramp guides the off-cut away from the blade after cutting. Cuts a precise 90° angle, with little to no tear-out. Includes a miter track stop to limit forward travel. T-track on top edge of sled lets you add stops for repeatable cuts. Short T-track parallel to blade accepts optional hold-down. 55916 Small Parts Sled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 74.99 45692 Rockler Mini Deluxe Hold Down Clamp . . . . . . . . . . . . . . . . . . . . . . . . . .$ 5.99

Hold Down(45692) sold separately

55


rockler.com


01172018142235

Thin Rip Jig Rip thin strips safely to the left of the blade without pushing narrow strips between the saw and fence. A single knob secures the jig and your setting at the same time. Ball bearing guide keeps your workpiece firmly against the fence for perfect repeatability. Solid phenolic. Fits 3/4"W x 3/8" D miter track. Note: ripping thin strips requires the use of a zero-clearance insert. 36833 . . . . . . . . . . . . . . . . . . . . . . $ 29.99

Saw Fence Digital Readout Get easy digital readouts of saw fence positions between 0" and 60" in decimal and fractional inches or millimeters. Two joinable metal tracks mount to round and rectangular fence rails and can be set up to measure on the right or left of the fence. Sensor strips stick to the tracks and supply the sliding readout unit with positional data. 39323 . . . . . . . . . . . . . . . . . . . . . $ 119.99

Table Featherboard Hold wood snug against the fence for safer, cleaner ripping, routing, drilling and more! Expandable miter track bars provide maximum holding power. Works on any tool with a standard miter slot! 53677 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99

Incra® Miter GaugesGauge 1000HD: Uncompromising range and accuracy with 180 positive stops (including stops at +/-22.5º), and a micro-adjustable vernier scale for fine-tuning to 1/10º. Features adjustable miter bar, telescoping fence (18” to 31”) and dual-arm flip stop, and exceptional duplicating ability. Gauge 1000 : Unbeatable accuracy! Solid steel laser-cut protractor head, 18" track fence and sliding stop positioner. 25464 Incra Miter Gauge 1000HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 199.99 20350 Incra Miter Gauge 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 119.99

25464

Incra® Miter Gauges Gauge V120 : The V120 lets you make precise cuts at almost any angle, featuring laser-cut stops every degree from +/- 60º and special stops at +/- 22.5º. Patented GlideLOCK miter bar adjusts for a no-slop fit in any standard miter slot. Gauge V27 : Similar to the V120, positive angle stops in 5º increments. 26537 Incra Miter Gauge V120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 89.99 29008 Incra® Miter Gauge V27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 74.99

2653729008

Zero Clearance Inserts Laminated plates resist wear and offer frictionless sliding. Improved control minimizes tearout, reduces wood damage and increases safety. 1/2" thick. 69147 Delta, 33/4"W x 133/8"L . . $ 31.99 69155 JET/Powermatic 64 31/2"W x 123/8" L . . . . . . . . . . $ 31.99 69163 Craftsman, 33/4"W x 14"L $ 31.99

Kreg® Precision Miter Gauge System Micro-adjusts to 1/100th of a degree (.003" over 6") 24"L, 3/4" aluminum miter bar contains five adjusters to eliminate play in the miter slot. Fits standard and T-track slots. Includes miter gauge, 24" aluminum fence, bar, right-to-left tape, flipstop, hardware and instructions. 25647 . . . . . . . . . . . . . . . . . . . . . . . . . . $ 139.00

“ I had always used homemade wooden featherboards, but I purchased this on a whim (53677). It is way better. I use it constantly, because it is so easy to set up and to remove. Very well designed. Two quick twists and it is right where I want it, and it is removed just as easily. Not only does it make my cuts straighter and more consistent, it provides a bit of a guard between the blade and my hands.”

Ted, from Ephraim, UT

Vega Table Saw Fence Systems Cut materials safely and precisely on your table saw! Designed for contractor-quality saws, smaller cabinet saws, and 10" saws. Locks parallel to your saw blade, features accurate measuring scales, and installs quickly to upgrade your saw to a precise cutting machine. Available with 26" or 50" rip capacity to the right of the blade and 8" to the left. 87678 26" . . . . . . . . . . . . . . . . $ 289.00 ★ 87686 50" . . . . . . . . . . . . . . . $ 319.00 Items with a star ★ are oversize packages and special charges apply.

Digital Angle Gauge w/Flip-Out Display Ultra-precise magnetic gauge sets the angle of saw blades, jointer fences, bandsaw tables and drill press tables! Measures both absolute level and relative bevel with readings that are always visible. Flip-out display. V-groove in base for round items like pipe and drill bits. Range: +/- 180 degrees. Resolution: 0.1 degrees. Uses two AAA batteries (not included). 55960 . . . . . . . . . . . . . . . . . . . . . . $ 44.99

Wixey Digital Angle Gauge Read precise angles in seconds! Features a green back-lit screen for easy readability. Built-in magnets secure the gauge to saw blades for rapid angle setups with 0.1º resolution. Great for miter saws, table saws, jointer fences and band saw tables. Zero button calibrates to any reference surface. Range: +/- 150º. Includes AAA battery. 57097 . . . . . . . . . . . . . . . . . . . . . . $ 29.99

ONLINE VIDEO!

Ball Our pavailaMultiown e 20815 20822

Mag Settingot eknivetable is muwith d 34099

RollUniv Our eall theon thesawhoor ver3" lowto be with cbe adsuppoFeaturoller Heigh 64194

GRR SafelyHigh-systemSuppoPlate repea 30737 62689 20753

GR20

BalanSupp

StabiPla

56


800-279-4441


01172018142636

ce cimal Two d be t of tracks with

9.99

ffer l

thick. 31.99

31.99 31.99

ms n ctor-and

w

de ne. ity to left. 9.00 9.00

e pply.

Bench Dog® Feather-Loc Table Saw Featherboard Use it on the table saw to keep long stock tight against the rip fence. Body shape allows setup to the right or left of the blade. Setup feather makes setting the tension fast, easy and repeatable. Includes a Miter Slot Adapter for tables with standard 3/8" x 3/4" slots. 29799 . . . . . . . . . . . . . . . . . . . . . . $ 16.79

You'll be able to handle almost any load with our heavy-duty stands!Choose from our Heavy-Duty 3-Row Ball Bearing Stand or Flip-Top Roller Stand both with 440 lb. weight capacity.

43399

Rockler® Heavy-Duty Flip-Top Roller Stand Flips from a 23/8" bearing roller to eight ball bearings for movement in any direction. 143/4" long bearing roller has spring-loaded axle. Leveling pad compensates for uneven floors. Height adjusts easily from 283/4" to 47" with locking knobs. Wedge design prevents stand from slamming downward during adjustment. Legs fold flat for easy storage. 440 lb. capacity. 43399 . . . . . . . . . . . . . . . . . . . . . . . $ 99.99

Turn the leveling pad to adjust for uneven floors.

Ball Bearing Rollers Our popular ball-bearing rollers are now available in economical quantity packs! Multi-directional. Lets you build your own extension tables. 20815 6-Pack 5/8" . . . . . . . . . . . $ 22.99 20822 6-Pack 1" . . . . . . . . . . . . . $ 31.99

Magnetic Jointer Jig Setting knives on jointer cutter heads just got easier! Magnetic bars hold jointer knives in place flush with the outfeed table on any 6" to 8" jointer bed. This jig is much quicker and easier than working with dial indicators. Solid steel. 34099 . . . . . . . . . . . . . . . . . . . . . . $ 34.99

Roller Support with Universal Clamp Our exclusive roller support gives you all the support you need in the shop or on the job site! Easily attaches to any sawhorse built with either horizontal or vertical 2x's (2x4, 2x6, etc.). Unique 3" low profile allows the roller support to be clamped on a workbench for use with chop saws and planers. Roller can be adjusted side to side for a full 11" support over the bench from the edge. Features 11/2" x 17" steel ball bearing roller with spring-loaded axle and side-to-side adjustability for workbench applications. Height adjustment from 3" to 155/16". 90 lb. weight capacity. Patented. 64194 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 49.99

69201

Heavy-Duty 3-Row Ball Bearing Stand Features three rows of eight 5/8" dia. steel balls that allow movement of stock in any direction. Top measures 22" x 14" for maximum support for outfeed tables on tablesaws, planers, sanders and drill presses! Adjustable height from 283/4" to 44". Folds to 18" x 48" x 7" for storage. 440 lb. weight capacity. 69201 . . . . . . . . . . . . . . . . . . . . . $ 159.99

GRR-Ripper® 3D Pushblock Systems Safely rip strips as thin as 1/4", resaw, rip small or angled pieces, short offcuts, etc. High-friction pads cling firmly to the stock to easily grip oddly-shaped pieces. Each system includes: Handle, Main Body, 1/4" and 1/2" Side Legs, Center Leg, Balance Support. GR200 System also includes: 1" Fence Spacer for wider stock, Stabilizing Plate for narrow stock. Add Microdial Taper Jig to cut clean tapers with precise repeatability. Made in U.S.A. More items and details are available on our website. 30737 GR200 System . . . . . . . . . $ 79.99 62689 GR100 System . . . . . . . . . $ 59.99 20753 1/8" Side Leg . . . . . . . . . $ 15.99

23183 Handle Bridge . . . . . . . . $ 15.99 55925 Gravity Heel Kit . . . . . . . $ 15.99 49979 Microdial Tapering Jig $ 129.95

GR100 62689

49979

GR200 30737 Handle

Main Body

Center Leg

Side Leg

Balance Support

Stabilizing Plate

Adjustable Spacer

Rockler 4-Piece Safety Kit Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Angled push blocks feature ultra-grippy Bench Cookie pad material. Table featherboard fits standard 3/4" x 3/8" miter slots and features expandable miter track bars for maximum holding power. 51369 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 29.99

57


rockler.com


01172018142636

JIG I 90º hwith aour exour Loincludand 3 91981 85953

Fors Get aholesrusticExtenflats fdrill b2 hexotherthan wides 32937

High 21158 29337 21165 22508 21172 24816 21179 20512 21186 20102 21193

Long Thesewith level 20563 1011 9184 68748 6875 68763 6877 85953

Rockler/Insty-Drive 18-Pc. Self-Centering and Countersink Set Includes tapered countersinks, self-centering bits and a driver bit set so you can convert from drilling and countersinking to installing perfectly centered hinge screws in seconds. Includes #6, #8 and #10 HSS 2-flute tapered pilot bits with 4-flute hex-shank countersinks, #6, #8 and #10 hex-shank self-centering bits, Rockler Insty- Driver, 10 driver bits, and a nylon pouch with belt loop. All bits are tapered for a tight fit and more driving power. 69045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 79.99

Rockler®/Insty-Drive Self-Centering Bits Make professional quality hinge installation a breeze – drill perfectly centered pilot holes every time! These self-centering bits feature hex shanks to prevent slipping. 69053 3-Pc. Set: #4, #6, #8 . . . . . . . . . . . . . . . . $ 29.99 68984 #4 Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99 68991 #6 Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99 68998 #8 Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99 69007 #10 Bit . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99 25415 #4 Drills (2-Pack) . . . . . . . . . . . . . . . . . . . $ 4.99 23514 #6 Drills (2-Pack) . . . . . . . . . . . . . . . . . . . $ 4.99 22851 #8 Drills (2-Pack) . . . . . . . . . . . . . . . . . . . $ 4.99 21115 #10 Drills (2-Pack) . . . . . . . . . . . . . . . . . . $ 4.99

Insty-Bit® Quick Change Extensions Allows easy access to hard-to-reach areas. Positive action chuck doesn't let go until you want it to. Each extension includes a 1" #1 Plain Hex Phillips Bit and a 2" #2 Power Groove Phillips Bit. 35424 3" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.99 38289 6" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.99 36070 12" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99

Taper drill/countersink

Rockler exclusive Insty-Driver (cutaway view)

DrillDrill your pilot hole with the countersink bits or the self-centering bits. Both feature hex-shanks to prevent slippage.

DriveDrive home the screws. Then slip off the Insty-Driver and do it again. You'll get fast and accurate hardware installation every time!

1 3Attach SleeveSlip on the Rockler exclusive Insty-Driver, which fits over Rockler countersink and self-centering bits. Magnetic tip holds all 1/4" hex-shank bits.

Magnetized tip fits all 1" and 2" driver bits.Insty-Driver fits over countersink

and self-centering bits

Screw

2

Self-centering drill bit

1/4" shank

69053 3-piece self-centering bit set

Fits Insty-Driver

High speed steel bit

Insty-Drive 7-Pc. Drill Bit Adapter Set Convert standard round shank drill bits and rotary tools into quick-change tools. With 1/4" hex power bit shanks. Works with Rockler/Insty-Drive Quick-Change Chuck (#69015). Includes 1/16", 3/32", 1/8", 5/32", 3/16", 7/32" and 1/4" drill bit adapters, plus 1/8" hex wrench. 2,500 RPM maximum. Comes with handy storage case. Made in USA. 30899 Insty-Drive 7-Pc. Drill Bit Adapter Set . $ 18.99 69015 Quick-Change Chuck . . . . . . . . . . . . . . $ 16.99

Tapered Bits with Countersinks 59933 #5 . . . . . . . $ 19.99 59940 #6 . . . . . . . $ 19.99 59947 #8 . . . . . . . $ 19.99 59955 #10 . . . . . . $ 19.99 59963 #12 . . . . . . $ 19.99

Replacement Tapered Pilot Bits 68909 1/8" . . . . . . $ 7.99 68916 9/64" . . . . . $ 7.99 68923 11/64" . . . . $ 7.99 68931 3/16" . . . . . $ 7.99 68938 7/32" . . . . . $ 7.99

1" Power Bits 84799 #1 Square Drive . . . . . . . . . . . . . . . . . . . . $ 1.99 31237 #2 Square Drive . . . . . . . . . . . . . . . . . . . . $ 1.99

Magnetic Bit Holder - Hex Shank 43448 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99 pk.

1/4" shank High speed steel bitFits Insty-Driver

High Speed Steel Countersink Make quick, accurate chamfers in wood, metal and other materials. 1/4" shank, single flute, and 82º included angle. 1/2" Dia. Countersink. Fits quick-change chuck #69015. 59986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99

Rockler/Insty-Drive Tapered Countersink Set Our 9-pc. value-packed set is fully compatible with the Insty-Driver system. Includes 3 HSS countersinks with tapered drill bits perfectly matched for #6, #8 and #10 screws, a 3/8" stop collar for setting depth, #1 and #2 Phillips bits, #1 and #2 Square Drive bits and a sturdy nylon case plus an allen wrench for all adjustments. All bits and countersinks are removable and adjustable. Bits and stop collar also available. 69030 9-Pc. Countersink Set . . . . . . . . . . . . . . $ 39.99 59993 3/8" Stop Collar . . . . . . . . . . . . . . . . . . . . $ 4.99

Rockler/Insty-Drive 5-Pc. #8 Countersink Set A great introduction to the Rockler/Insty-Drive system! Set contains our exclusive Insty-Driver, #8 high speed steel (HSS) tapered hex shank bit with 4-flute countersink, #2 square drive bit, #2 Phillips power bit and 1/8" hex wrench. 59971 5-Pc. Set . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99 4" Insty-Driver 59979 4" 1-2-3 Drill and Drive Sleeve . . . . . . . $ 9.99

59979

Rockler/Insty-Drive Quick-Change Chuck The 3/8" shank chuck includes a quick-release sleeve and accepts all 1/4" hex shank bits and drivers. 69015 . . . . . . . . . . . . . . . . . . . . . . . . .$ 16.99

ONLINE VIDEO!

69030 9-Piece Countersink Set

58

Drilling

800-279-4441


01172018143106

Forstner Bit Sharpening Kit Renew the edges on worn down bits with this simple 3-piece kit. Perfect for almost any carbide-tipped forstner bit (including multi-spur bits), it includes a 600 grit diamond honing stone, 600 grit triangular diamond file, a CeramCut honing stone and complete sharpening instructions. Also works to sharpen saw blades and other bits. 32355 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99

JIG IT® Drill Guide 90º holes are now easy with a hand-held drill and our exclusive guide. Use our Long Shank (37/8") Forstner Bits (not included) with a 3/8" diameter shank and 3/8" stop collar. 91981 JIG IT Drill Guide . . . . . . $ 16.99 85953 3/8" Stop Collar . . . . . . . . $ 3.99

Forstner Hinge Cup Bits Use with a drill press to drill hinge cup holes. 3/8" shank.

24912 30mm Carbide Bit . . . . . $ 21.99 46524 35mm HSS Bit . . . . . . . . . $ 19.99 46532 35mm Carbide Bit . . . . . $ 27.99

46532 Forstner Bit Extender Get an extra 21/2" of reach into deep holes with handy extender. Great for rustic furniture and joining large timbers. Extender has 3/8" shank with triangular flats for positive grip. Accepts 3/8" shank drill bit, which is securely gripped with 2 hex-head screws. Also works with any other style of 3/8" shank drill bit greater than 1" in dia. 4" long. 3/4" wide at widest section. 32937 . . . . . . . . . . . . . . . . . . . . . . . $ 7.99

High Carbon Steel Forstner BitsCut clean, precise flat-bottom holes without tear-out. Perfect for doweling, mortising, pocket holes and hardware installation. 3/8" Shank.

High-Carbon Steel Forstner Bits 21158 1/4" . . . . . . $ 5.99 29337 5/16" . . . . . $ 5.99 21165 3/8" . . . . . . $ 6.99 22508 7/16" . . . . . $ 6.99 21172 1/2" . . . . . . $ 6.99 24816 9/16" . . . . . $ 6.99 21179 5/8" . . . . . . $ 7.99 20512 11/16" . . . . $ 7.99 21186 3/4" . . . . . . $ 8.99 20102 13/16" . . . . $ 8.99 21193 7/8" . . . . . . $ 8.99

22721 15/16" . . . . $ 9.99 21200 1" . . . . . . . . $ 9.99 49707 11/16" . . . . . $ 9.99 21207 11/4" . . . . . $ 10.99 21214 13/8" . . . . . $ 11.99 21221 11/2" . . . . . $ 11.99 27883 19/16" . . . . $ 12.99 21228 13/4" . . . . . $ 13.99 21242 2" . . . . . . . $ 14.99 28278 21/2" . . . . . $ 24.99 29045 23/8" . . . . . $ 23.99

21967 23/4" . . . . . $ 27.99 27493 27/8" . . . . . $ 28.99 27254 3" . . . . . . $ 29.99 29804 31/8" . . . . . $ 32.99 26249 31/4" . . . . . $ 34.99 21249 15mm . . . . . $ 9.99 21256 20mm . . . $ 10.99 21263 25mm . . . $ 12.99 21277 26mm . . . $ 13.99 21214 35mm . . . $ 11.99 21284 40mm . . . $ 14.99

91855 3/4" . . . . . $ 35.99 68779 7/8" . . . . . $ 36.99 91862 1" . . . . . . . $ 37.99 68787 11/8" . . . . . $ 39.99 91876 11/4" . . . . . $ 42.99 68795 13/8" . . . . . $ 44.99

91883 11/2" . . . . .$ 45.99 68802 15/8" . . . . . $ 46.99 91897 13/4" . . . . . $ 47.99 68810 17/8" . . . . . $ 48.99 91904 2" . . . . . . . $ 52.99 68818 21/8" . . . . . $ 54.99

Long Shank Carbide Forstner Bits These carbide-tipped bits have extra-long shanks for deep holes. Designed for use with the our exclusive JIG IT drill guide, allowing you to bore perfectly level holes without a drill press. 41/2" L overall. Bits sold individually. 20563 26mm . . . $ 36.99 10117 35mm . . . $ 39.99 91841 40mm . . . $ 49.99 68748 1/4" . . . . . $ 22.99 68755 3/8" . . . . . $ 24.99 68763 1/2" . . . . . $ 32.99 68771 5/8" . . . . . $ 34.99 85953 3/8" Stop Collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3.99

6-Pc. Fractional Forstner Bit Set5/16", 7/16", 9/16", 11/16", 13/16" and 15/16" bits. 35262 . . . . . . . . . . . . . . . . . . . . . . .$ 34.99 7-Pc. Forstner Bit Set1/4", 3/8", 1/2", 5/8", 3/4", 7/8" and 1" bits. 69061 7-Pc. Set . . . . . . . . . . . . . $ 34.99 16-Pc. Forstner Bit Set1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 11/8", 11/4", 13/8", 11/2", 15/8", 13/4", 17/8", 2" and 21/8" bits. 69069 16-Pc. Set . . . . . . . . . . . . .$ 99.99 22-Pc. Forstner Bit Set1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 11/8", 11/4", 13/8", 11/2", 15/8", 13/4", 17/8", 2" and 21/8" bits. Shank lengths vary from 23/4" to 3". 36191 . . . . . . . . . . . . . . . . . . . . . .$ 169.99

ONLINE VIDEO!

Rockler® Drill Press Fence Get easy adjustability and precise repeatability for your drill press, plus free instructions for building your own drill press table! Adjustable MDF faces that let you straddle forstner bits and sanding spindles, and a flip-down stop allows precise placement. The included low-profile dust port is designed for minimal obstruction with drill press column, and angles up and away to prevent hose from catching on the table edge. 24" long. Includes mounting hardware. 53648 Drill Press Fence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 79.99 56312 Dust Port for Drill Press Fence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 9.99

56312

Rockler® 25-Piece Brad Point Drill Bit Set with 4 Bonus Bits Great for pilot holes, miniature work and many tasks. Precision-ground high speed steel bits in an indexed case. Sizes from 1/8" to 1/2" sizes in 1/64" increments. Bonus 4 small diameter split point bits of 1/16", 5/64", 3/32", and 7/64". 68895 . . . . . . . . . . . . ..$ 49.99

ed

$ 7.99 $ 7.99 $ 7.99 $ 7.99 $ 7.99

el bit

d

14.99

h the with

#10 d #2 urdy ts. All le.

39.99 $ 4.99

k-x

16.99

59

Drilling

rockler.com


01172018143107

Flex Extension Bends, twists and turns to let you drill and drive in tight spaces, yet still allows you to keep a firm grip while the bit end rotates. 12" long. Designed for multi-bit drivers. 69170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.99

High-Speed Steel Brad Point Bits High speed steel for long life. Ideal for precision boring in softwood, hardwood and plywood. You'll get a clean cut without tear-out! Angled cutting spurs produce a clean, precise hole.

53780 2.5mm . . . .$ 3.99 25427 3mm . . . . .$ 3.99 20296 4mm . . . . .$ 4.99 28533 5mm . . . . .$ 4.99 29164 6mm . . . . .$ 5.49 20765 7mm . . . . .$ 5.99 28516 8mm . . . . .$ 6.49

Metric Brad Point Bits

24081 1/8" . . . . . .$ 3.99 24038 3/16" . . . . .$ 4.49 25618 7/32" . . . . .$ 4.49 25994 1/4" . . . . . .$ 4.49 20281 19/64" . . . .$ 4.99 26659 5/16" . . . . .$ 4.99 22584 11/32" . . . .$ 5.49 26664 23/64" . . . .$ 5.49 24660 3/8" . . . . . .$ 6.99 22185 25/64" . . . .$ 6.49

21380 7/16" . . . . .$ 6.99 27735 29/64" . . . .$ 8.99 25291 15/32" . . . .$ 8.99 20812 1/2" . . . . . .$ 9.99 29914 19/32" . . .$ 11.99 25538 5/8" . . . . .$ 13.99 25782 3/4" . . . . .$ 19.99 29423 7/8" . . . . .$ 25.99 27612 1" . . . . . . .$ 29.99

23508 9mm . . . . .$ 6.99 22686 10mm . . . .$ 7.99 29069 11mm . . . .$ 8.99 20531 12mm . . . .$ 9.99 23866 13mm . . . .$ 9.99 28952 14mm . . . .$ 9.99 29257 15mm . . .$ 10.99

Hex Shank Tapered Plug Cutters Special flute design cuts precise edges that require no sanding. Plug diameter is tapered so the wide end is .025" oversized, creating a perfectly snug fit. Suitable for both soft and hard woods. 1/4" hex shank on all cutters fits quick-change chuck (sold below). 68960 1/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 68968 3/8" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 16.99 68976 1/2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 17.99 69015 Quick-Change Chuck . . . . . . . . . . . . . . . $ 16.99

Countersink Bits 37691 #5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 22.99 33141 #6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 22.99 38068 #8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 22.99 Replacement Pilot Bits 31017 #5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99 34487 #6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99 30012 #8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99 35367 #10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.99 35103 #12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.99

7-Piece Split Collar Set These split-ring stop collars securely clamp around bits for drilling a precise depth. When tightened, they clamp over the complete diameter of the drill bit shaft without marring. 68946 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99

3-Pc. Self-Centering Plug Cutter Set Spring-loaded self-centering tip guides the cutter for a smooth, tapered plug every time. 1/4" hex shank prevents tool from slipping, and is quick-change compatible. Includes 5/16", 3/8" and 1/2" cutters. Works with all 3/8" and 1/2" drill presses and handheld drills. Hardened steel. 39817 3-Pc. Set . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99 34632 5/16" . . . . .$ 9.99 31115 3/8" . . . . .$ 12.99

Drill Guide Kit Just pop a steel bushing into the plastic guide to drill perfectly perpendicular holes, even on spheres and cylinders. Also centers your drill bit on edges. Includes 6 bushings to guide 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2" bits. 61503 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Big Gator V-Drill Guide The next best thing to having a drill press in your pocket, this clever steel guide ensures perfectly straight, perpendicular drill holes in round stock, flat stock, even directly into corners—all with just a hand drill. V-groove in the bottom centers the holes on pipes and dowels, while flats allow 90° drilling into flat surfaces. 17 hole sizes (1/8" to 3/8" for imperial, 3 to 9.5mm for metric). Heat treated for durability. 49531 Standard . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.99 45597 Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.99

Mega-Magnetic® Bit Holder 40 times magnetically more powerful than ordinary bit holders, one powerful magnet magnetizes and holds the bit while another ring-shaped magnet puts a super grip on your fastener. Made of rugged stainless steel, have a 1/4" hex power shank, and work on all 1” hex/power drive bits. 6" holder has a flexible neck that bends up to 45° around corners. Ground ship only. 41886 3" Bit Holder . . . . . . . . . . . . . . . . . . . . . . $ 9.99 41887 6" Flexible Bit Holder . . . . . . . . . . . . . .$ 12.99

7-Piece High-Speed Steel Brad Point Set Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2" size bits. 24905 . . . . . . . . . $ 22.99

Rockler® 3-Piece Tapered Countersink Bit Set with Case Deep flutes and tapered pilots clear chips quickly and leave neat, clean rims, even in delicate veneers. Includes three bits perfectly matched for #6, #8 and #10 screws, (3) stop collars, (2) hex wrenches and molded case with space for two more countersinks. 3/8" shanks. 50034 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 59.99

50-Pc. Mini Drill Bit Set Ideal for drilling small holes like pilot holes! Includes a plastic storage case and 10 each of the five most popular smaller diameter drill bits: 1/16", 5/64", 3/32", 7/64" and 1/8". High-speed steel for durability. 20575 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99

38614 7/16" . . . .$ 14.99 46140 1/2" . . . . .$ 14.99

41886

41887

HPSpnisecrfiaq6666

3SapcoWh333

• S• I• C

Kreg BoastJig, abig, wHD mframielse tExtreused separGuideStop Screw 4679 4691 4918 4798 4804

Bead Get inyour beadlmorticapacguideconne1/4" 37801 39882 36546

60

Drilling

800-279-4441


01182018103235

14.99 16.99 17.99 16.99

for k

.

29.99 14.99 14.99

1887

• Stronger than traditional mortise and tenon joinery• Increased glue surface area• Create joints with just a drill

Kreg Jig® HD Jumbo Pocket Hole System Boasting all of the famed speed of the original Kreg Jig, along with joints that are 50% stronger, and big, weather coated 21/2" #14 screws, the Kreg Jig HD makes a simple, strong joinery system for wall framing, deck railing, outdoor furniture, and anything else that must stand the test of time and the elements. Extremely portable for job-site use, and can also be used with the benchtop base of the Kreg K4 (sold separately, #27204) for upright drilling. Includes Drill Guide, Stop Block, 1/2" Diameter HD Stepped Drill Bit, Stop Collar, Allen Wrench, 6" Driver Bit and Starter Screw Set. 46791 HD Pocket Hole System . . . . . . . . . . . . . $ 59.00 46910 21/2" #14 HD Screws, 30-Pack . . . . . . . . . $ 4.99 49180 21/2" #14 HD Screws, 125-Pack . . . . . . . $ 19.99 47983 HD Replacement Driver . . . . . . . . . . . . . $ 6.99 48049 HD Replacement Drill Bit . . . . . . . . . . . $ 19.99

Grex Pneumatic Fastening Guns Fasten faster with these air-powered guns, even in the hardest woods! The 23-gauge P650 and P635 shoot inconspicuous headless pins to make the smallest possible entry hole and adapt automatically for different length pins (P650 pin range: 3/8"-2"; P635 range: 3/8"-13/8"). Operate between 60 and 100 psi. Your work with molding, light paneling, picture frames, trim and more will take a fraction of the time! 30918 P650 2" Pinner . . . . . . . . . . . . . . . . . . . $ 269.99 26881 P635 13/8" Pinner . . . . . . . . . . . . . . . . . $ 189.99 34060 Pins Multipack, 23 Gauge (3000/pk.) . . . $ 9.99 20168 3/8" L Pins . .$ 6.99 26001 5/8" L Pins . .$ 6.99 31711 7/8" L Pins . .$ 7.99 27964 1" L Pins . . .$ 8.99

29994 13/8"L Pins $ 10.99 34109 11/2"L Pins $ 10.99 37999 13/4"L Pins $ 12.99 32297 2"L Pins . . $ 16.99

Beadlock® Tenon Stock Specially designed to increase the amount of precious glue space and prevent joints from racking. 30043 1/4" Stock, (25) 11/2" Pieces . . . . . . . . . . $ 9.99 34955 3/8" Stock, (20) 2" Pieces . . . . . . . . . . . . $ 9.99 34320 1/2" Stock, (15) 21/2" Pieces . . . . . . . . . . $ 9.99 31793 1/4" Stock, (3) 12" Pieces . $ 8.99 20796 3/8" Stock, (3) 12" Pieces . $ 8.99 20783 1/2" Stock, (3) 12" Pieces . $ 8.99

Beadlock® Router Bit Make your own Beadlock stock and save! 31318 3/8" Bit . . . . . . . . . . $ 51.99

Beadlock® Pro Kit, 3/8" Get incredibly strong, fully concealed joints with just your hand drill and this kit. The Pro Kit lets you create beadlock joints as well as traditional smooth-sided mortises with a chisel-guiding paring block. 31/2" capacity. Includes components (jig, HSS bit, stop collar, guide block, paring block) for 3/8" wide Beadlock connections. Accessory kits include the same to create 1/4" and 1/2" connections. 37801 Beadlock Pro Kit (3/8") . . . . . . . . . . . . $ 139.99 39882 1/4" Beadlock Pro Accessory Kit . . . . . $ 59.99 36546 1/2" Accessories for Beadlock Pro Kit . $ 47.99

Beadlock® Basic Kit, 3/8" Perfect for smaller projects like face frames and doors. Included shim set lets you mortise a variety of stock thicknesses and offset your mortises. Includes (4) .060" shims, (2) .030" shims, 3/8" HSS Drill Bit and molded plastic case. Accessory Kit (34088, 34985) include corresponding guide block, drill bit and shim set. 34802 Beadlock Basic Kit, 3/8" . . . . . . . . . . . . $ 29.99 38088 1/4" Accessory Kit . . . . . . . . . . . . . . . . . $ 17.99 34985 1/2" Accessory Kit . . . . . . . . . . . . . . . . . $ 26.99

Kreg® Deck Jig System No more exposed nails or screws! Drill and drive deck screws at the optimal angle for concealed fastening of 3/4"-11/8" thick deck boards. An easy grip handle and 90° alignment tab make setup easy. Onboard drilling jig is preset at the optimal angles for straight-on as well as left and right corner fastening. Includes the Deck Jig, 6" drill bit, 6" square driver bit, three 5/16" spacers, three 1/4" spacers, stop collars, DVD and case. 36613 Deck Jig System . . . . . . . . . . . . . . . . . . . $ 79.00 31736 Deck Bit Collar . . . . . . . . . . . . . . . . . . . . $ 16.99 49022 25⁄8" #8 Protec-Kote Screws, 100-pk . . $ 11.99 48815 25⁄8" #8 Protec-Kote Screws, 525-pk . . $ 59.99 31688 2" #8 Screws, 700-Pack . . . . . . . . . . . . . $ 49.99

30918


Arrow PT23G 23-Gauge Pin Nailer Fires thin, headless pins that reduce the need to fill holes—ideal for small projects, moldings and trim. Features adjustable exhaust cover, quick-load magazine, and dual trigger safety. Constructed from die-cast aluminum for durabilility and light weight. Drives 23-gauge pin nails from 3/8" to 1" in length. 53415 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 49.99

61

Beadlock® and Joinery

rockler.com


01182018103235

Dowel Centers 42341 1/4", (8) . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99 42358 5/16", (8) . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99 42366 3/8", (8) . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99 42374 1/2", (8) . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99 Variety Pack includes eight nickel-plated dowel centers. Two of each size: 1/4", 5/16", 3/8" and 1/2". 27179 Variety Pack (8) . . . . . . . . . . . . . . . . . . . $ 7.99

Plate Joinery Biscuits Three standard sizes of biscuits. 21491 #20, 250-Pack . . . . . . . . . . . . . . . . . . . .$ 15.99 21479 #10, 250-Pack . . . . . . . . . . . . . . . . . . . .$ 15.99 53583 #0, 75-Pack . . . . . . . . . . . . . . . . . . . . . . .$ 9.99 1000 Biscuit Mix Includes 500 #20 (23/8" x 1"), 250 #10 (21/8" x 3/4") and 250 #0 (13/4" x 5/8") biscuits. 64535 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 35.99

Complete Doweling Kit Includes Self-Centering Doweling Jig 49221, a pint of Titebond glue, 1/4" x 11/2" dowels (100), 3/8" x 11/2" dowels (100), 3/8" x 2" dowels (50), 5/16" x 2" dowels (50) and two each of the following nickel-plated dowel centers: 1/4", 5/16", 3/8" and 1/2". 10488 . . . . . . . . . . . . . . . . . . . . . $ 74.99

Self-Centering Doweling Jig Keeps the guide block dead center between the jaws, allowing you to change stock thicknesses without resetting the jig. Precision machined and plated to prevent rust. Maximum 2" capacity with boring sizes 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2". 49221 . . . . . . . . . . . . . . . . . . . . . $ 62.99

10488

49221

Biscuit Cutter Gauge This gauge shows the exact width and depth of sizes 0, 10 and 20 biscuits slots, allowing you to determine which biscuit size will fit before cutting (and potentially blowing out an edge). Once correctly positioned, the pencil slots allow you to perfectly center your marks. Gauge shows actual cut, which accommodate the swelling of the biscuit once glue is applied. 31447 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99

Dow'l Simp'l Kit Swing-arm doweling jig allows you to easily make three types of joints: right angle, edge to edge and edge to surface. Center and align dowels on stock that is nominally 5/8", 3/4" and 1" thick. No adjustments needed for different stock thicknesses. Includes aluminum clamp-on jig with steel inserts, three carbon steel brad point drill bits in 1/4", 5/16" and 3/8" sizes, three drill stops and wrench, three steel drill bushings, six dowel center points, and wood dowels. 30345 . . . . . . . . . . . . . . . . . . . . . $ 34.99

Dowel Pro Jig Delivers the precision demanded by professional woodworkers! Precisely aligned guides for 1/4", 5/16" and 3/8" holes. Handles stock ranging from 1/2" to 11/4". Includes precise depth stops for 1/4", 5/16" and 3/8" drill bits. An assortment of dowel pins is included with the jig. Aluminum. 65730 . . . . . . . . . . . . . . . . . . . . . $ 39.99

“ In putting together panels, supporting members or shelves, I find biscuits an invaluable part of construction. ”

Bill, from Hondo, NM

Dowel Pin Assortment Kit 500 hardwood spiral dowel pins from 1/4" through 1/2" diameter, in a plastic storage box. 19661 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99

Spiral Dowel Pins Greater distribution of glue results in stronger joints. Hard maple. 50 per pack. 21113 1/4" x 11/2" . $ 2.99 36204 5/16" x 11/2" $ 3.49 21139 3/8" x 11/2" .$ 3.49 35158 7/16" x 11/2" $ 3.49 21238 5/16" x 2" . $ 3.99

21154 3/8" x 2" . . $ 3.99 21212 7/16" x 2" . $ 3.99 21188 1/2" x 2" . . $ 3.99 21170 3/8" x 21/2" . $ 3.99 21196 1/2" x 21/2" . $ 4.49

Self-Centering Doweling Jig For Thick Timbers Great for large jobs such as swing sets and outdoor structures! Opens to a full six inches. Precisely aligned guides for five permanent holes including 1/4", 5/16", 3/8", 7/16" and 1/2". 20262 . . . . . . . . . . . . . . . . . . . . . $ 84.99

44287

48169

Rockler Doweling Jig Kits Each of our doweling jigs now includes a drill bit and stop collar! Set the two parts together, clamp the jig and strike a line across the face of the joint, then drill for a perfect fit every time. Hardened steel drill guides. 1/4" and 3/8" guides have holes spaced 3/4"-on-center, 1/2" guide has holes spaced 1"-on-center. Complete Doweling Jig Kit includes all three jigs, bits, stop collars and storage case. 56195 Complete Jig Kit . . . . . . $ 71.99 48169 1/4" Jig Kit . . . . . . . . . . . $ 17.99 47516 3/8" Jig Kit . . . . . . . . . . . $ 19.99 45367 1/2" Jig Kit . . . . . . . . . . . $ 24.99 46456 Storage Case, only . . . . . . $ 9.99

Porter-Cable Deluxe Biscuit Joiner 7.5 amp motor! Seven-position depth stop for a wide range of applications. Fence with micro height adjustment places biscuits perfectly. 135˚ tilt fence with positive adjustable stop at 90º. Includes 4" diameter blade. 90224 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 219.99

ONLINE VIDEO!

KregPock A proat a cprecisdepthPull tand sraise easy positispringaccurmakemate3/8" 56604 53705 57613

Kreg Creatwith 3 34883 23026 23038 37288

Poc

Mini IncludFeatureinfoJig bosetter 60370 24817 59832

Kreg ConcematerKreg Jthe p 57647 59095 58186 50477

62

Joinery

800-279-4441


01172018143623

6.99 6.99 6.99 6.99 ers.

7.99

5.99 5.99

$ 9.99

4")

35.99

des dles cludes and

wel um.

39.99

bers of

, NM

g

ets full for ,

84.99

Kreg Foreman Semi-Automatic Pocket Hole Machine (DB210) A professional-grade pocket hole machine at a consumer-friendly price! Drills a precisely-placed pocket hole at the perfect depth in materials from 1/2" to 11/2" thick. Pull the handle to clamp your workpiece and start the powerful 110-volt motor and raise the drill bit through the table in one easy motion. Tool-free adjustable fence positions your workpiece. Adjustable, spring-loaded stops provide repeatable accuracy. Clear markings in the table make it easy to position the fence for your material thickness. Includes a standard 3/8" Kreg stepped drill bit. Tabletop dimensions: 14" x 231/2". 56604 Kreg Foreman Semi-Automatic Pocket Hole Machine . . . . . . . . . . . .$ 399.00 53705 Micro Drill Bit and Guide for Kreg Foreman Pocket Machine . . . . . . .$ 26.99 57613 HD Drill Bit and Guide for Kreg Foreman Machine . . . . . . . . . . . . . . .$ 31.99

Kreg® Jig K4 Pocket Hole System Includes the main bench-mounting unit with toggle clamp, a removable 3-hole drill guide, a 3/8" step bit for drilling the pocket hole and pilot hole in one step, a #2 driver bit, dust shroud, carrying case and instructional DVD. 27204 Kreg Jig K4 . . . . . . . . . . . . . . . . . . . . . . . $ 99.00

Kreg® Jig K4 Master System A front-mounted clamp and integral dust collection. Precise adjustment pins let you center a screw in material 1/2" to 11/2" thick. Side stop ensures perfect repeatability. Includes K4 three-hole drill guide block, benchtop base, portable base, dust collection shroud, stop, face clamp, 3/8" step drill bit, 6" #2 driver bit, 3" #2 driver bit, depth collar, hex wrench, screws and quick-start guide. 41410 Kreg Jig K4 Master System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 139.00 51754 Kreg KTC55 System Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99 56169 Kreg Pocket Hole Project Plans CD-ROM . . . . . . . . . . . . . . . . . . . . . . . .$ 14.99 27138 Kreg Spacer Blocks, 3-Pk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 9.99

Kreg® Pocket-Hole Plugs Create a seamless look to pocket holes with 3/8” plugs. 50 per package. 34883 Paint Grade . . . . . . . . . . . $ 5.49 23026 Oak . . . . . . . . . . . . . . . . . . $ 7.99 23038 Maple . . . . . . . . . . . . . . . . $ 7.99 37288 Pine . . . . . . . . . . . . . . . . . . $ 7.99 Kreg® Micro Pocket Plugs

44635 Oak, 65-Pk. . . . . . . . . . . . . $ 7.99 48627 Paint Grade, 65-Pk. . . . . . $ 5.49

Kreg® Micro Pocket Drill Guide Perfect when standard pocket holes are too big. 25% smaller hole dia. Works with standard Kreg Jigs. Includes Drill Bit, Depth Collar, and Starter Screw Set. 33984 Drill Guide . . . . . . . . . . . $ 44.00 32982 Micro Depth Collar . . . . . $ 2.49 36953 Micro Pocket Drill Bit . . $ 16.99 32679 #6 x 3/4", 100-Pack . . . . . $ 3.99

Quick-Release Pock-It Hole Clamp® Clamp and align pocket hole joints easily. Quick-release slide button snugs and loosens in an instant, the ratcheting handle does final tightening. All the clearance needed to clamp and fasten double joints in one step. Works with 3/8" pocket holes on 3/4" thick face frames and casework, and stock up to 3" wide. Patent pending. 41425 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 24.99

Kreg® Jig R3 Pocket Hole System The R3 System includes a pocket hole jig, clamp pad adapter, step drill bit, driver bit, depth collar, hex wrench and sample screws and plugs. The jig itself features wood chip relief holes and hardened steel drill guides with a lifetime warranty. Multiple position settings let you work with stock ranging from 1/2"-11/2" thick. Carrying case. Clamp not included. 22708 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.00

Kreg® Face Clamps Perfectly flush joint lines every time. 26613 31/4" throat depth . . . . . $ 21.99

26613

Pocket hole screws in the Screws and Fasteners Section

Mini Kreg® Pocket Hole Kit Includes jig, pocket hole bit and stop collar. Features hardened steel drill guide and glass-reinforced nylon body with chip extraction hole. Jig body is non-tapered for easy clamping. Plug setter is incorporated into base of jig. 60370 Kit . . . . . . . . . . . . . . . . . . $ 19.00 24817 Pocket Hole Jig only . . . . $ 9.00 59832 1-Pc. Step Drill Bit . . . . . $ 17.99

33630 Stop Collar/Hex Wrench . $ 4.49 85953 3/8" Stop Collar . . . . . . . . $ 3.99

27138

Kreg Jig® K5 Pocket Hole Master System Includes a 3'' Automaxx Clamp that self-adjusts for any thickness of material up to 27/8" thick. K5 Jig has convenient front-mounted clamp that also adjusts automatically to match workpiece thickness. Large support wings hold your workpiece steady, and have storage compartments inside. Also includes swiveling dust port, stepped drill bit, 6" driver bit, stop collar, starter screw and plug pack and user guide. 50424 K5 Master System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 159.00 49989 K5 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 129.00

ONLINE VIDEO!

Kreg® Custom Pocket Hole Plug Cutter System Conceal your pocket holes with face-grain wooden plugs cut from the same material—even the same boards—as your project. Just slip the guide block into a Kreg Jig K3, K4 or K5, install the included Plug Cutting Bit in your drill and bore out the plugs. Optional bits available below for Micro and HD pocket holes. 57647 Plug Cutter System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 69.99 59095 Standard Bit (Replacement) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 39.99 58186 HD Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 39.99 50477 Micro Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 39.99

57647 50477

59095

58186

63

Joinery

rockler.com


01172018143623

Heavy duty 1/8" steel is 50% thicker than the competitor's

Square holes for carriage

bolts

Pre-drilled flange makes tops or shelves easy to mount

Total Lock Stem Casters Locking lever secures both wheel and swivel. Casters fit a variety of shop stands. 21/2" diameter ball bearing wheels. 110 lbs. capacity per caster. 1"L x 3/8"-16 threaded stems. Set of four. 34000 Casters, 3/8"-16 TPI stem $ 34.99 26050 Caster Brackets . . . . . . . . .$ 25.99

Shop Stand RisersRaise your stand 6"and work at a more comfortable height . 55601 6" Risers, 4-Pk. . . . . . . . . $ 24.99

Shop Stand Drawer Kits Add drawers to Rockler Shop Stand Components. Pre-drilled to fit 32"H. Includes 4 vertical corner brackets, 2 horizontal slide brackets and mounting hardware for one drawer. Pre-tapped for ball-bearing or epoxy slides, sold separately. Drawers and pulls not included. Not compatible with 18" x 26" x 32" Shop Stand (48426). 47716 18" Drawer Hardware Kit (for 16" slides) . . . . . . . . $ 31.99 49556 24" Drawer Hardware Kit (for 22" slides) . . . . . . . . $ 31.99

Caster Set for Rockler® Steel Shop Stands Locking lever secures the wheel and swivel at the same time. Perfect for our shop stands. 23/8" diameter ball bearing wheels. 110 lb. capacity per caster. 1/2"–13 TPI stems. 4-Pack. 47034 1/2"-13 TPI stem . . . . . . . $ 39.99

Adjustable Multi-Function Shop Stand Components A universal design lets you build up to 15 different sizes of shop stands. Perfect as a work station, router table cabinet, workbench, assembly table, tool stand and more! Legs come in three heights; stretchers available in five sizes. Maximum stand size is 60" x 60". Shop Stand Legs, 4-Pack 54537 16" . . . . . . . . . . . . . . . . . . $ 64.99 68618 28" . . . . . . . . . . . . . . . . . $ 69.99 60749 32" . . . . . . . . . . . . . . . . . $ 74.99

Shop Stand Stretchers, 4-Pack 60757 18" . . . . . . . . . . . . . . . . . . $ 29.99 60764 24" . . . . . . . . . . . . . . . . . . $ 32.99 60772 36" . . . . . . . . . . . . . . . . . . $ 36.99

Rockler® 18" x 36" x 32" Shop Stand The ideal base for a narrow workbench or assembly station. Works great in shops with limited space. 47502 . . . . . . . . . . . . . . . . . . . . . $ 129.99

Rockler® 24" x 36" x 32" Shop Stand The perfect stand for your CNC Shark or the 28" x 40"Rockler T-Track Table Top (46654, sold separately). Also works well as a base for a workstation. 48089 . . . . . . . . . . . . . . . . . . . . . $ 139.99

Rockler® Steel Shop Stands – 2 easy ways to buy!Legs and stretchers have square holes for easy assembly with carriage bolts and are pre-drilled to easily add your own sides, bottom and hinged doors to make a built-in cabinet. Legs are heavy-duty 1/8" steel, with adjustable leveling feet. The upper stretchers can be mounted flush with top or 4" down to allow room to add a drawer or vise. All parts are coated with durable black sand paint. Assembly hardware is included. For additional height, add 3" Shop Stand Risers (44836, sold separately).

Rockler® 18" x 26" x 32" Router Table Stand Fits all Rockler and Bench Dog router tables. Also works as a chop saw stand, sharpening station or small workbench. 48426 . . . . . . . . . . . . . . . . . . . . . $ 119.99

24" x 48"

24" x 60"

36" x 36"

18" x 18"

18" x 24"

18" x 48"

18" x 60"

18" x 36"

24" x 36"

36" x 48"

36" x 60"

48" x 48"

24"x 24"

18" Deep 24" Deep 36" Deep 48" Deep 60" Deep

48" x 60"

60" x 60"

60780 48" . . . . . . . . . . . . . . . . . . $ 39.99 53727 60" . . . . . . . . . . . . . . . . . . .$ 44.99

1 Our Most Popular Packages

2 Your Custom Configuration – 15 possible combinations plus 3 heights!

Benc Roundtraditi 29817

Legs in three sizes

Stretchers in 5 sizes

RockCast Lets yCasteaccesobstruit alsoJust reIncludPowd 53004

O V

Rock A newtop wto secsizes assem1/4" MounStand 46654 48089

Mo

Find many more Shop Setup items onlineat rockler.com/workshop-accessories

Wor With mateof plyneed 48509

64

Shop Setup

800-279-4441


01172018144124

. 2 ing d

d

x 26"

31.99

31.99

.

rk or Top

s well

39.99

e

39.99 44.99

Hold-Down Clamp A simple hammer tap wedges the workpiece against your bench. 41/4" reach. 81/4" L. 11/16" dia. 90407 . . . . . . . . .$ 14.99

Bench Accessory Kit Round out your workbench with this handy kit. Includes two traditional holdfasts, four bench dogs and a non-slip router mat. 29817 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 27.99

Bench Dogs Lightweight and non-marring! Low profile (7/16") for working with 1/2"+ thick material. For 3/4" dia. holes. 64256 4-Pack . . . $ 9.99

9" and 7" Quick Release Workbench Vises For benches up to 21/4" thick. 9" vise has 9" wide jaws with 13" opening capacity. 7" vise has 7" jaws with a 9" opening capacity. Great for clamping panels with bench dogs. Vise faces are 27/8" H. 7/8" screw diameter. Easy to install. Close-grained cast iron. 33487 9" . . . . . . . . . . . . . . . . . . $ 169.99 37375 7" . . . . . . . . . . . . . . . . . . $ 129.99

1/4 turn quick-release

mechanism

Pop-up dog

37180 Heavy-Duty Quick-Release Vises A 1/4-turn releases these heavy-steel vises. Superior stability and rack prevention. End Vise features 1" diameter guide rods (12" spacing, on center), a 171/2" handle plate and 13" overall travel. Front Vise offers 3/4" guide rods (6" O.C. spacing), a 9" plate and 83/4" overall travel. Wooden jaw plate and 1/4" lag bolts not included. 27838 Front Vise . . . . . . . . . . . $ 124.99 ★ 37180 End Vise . . . . . . . . . . $ 219.99

Rockler® Workbench Caster Set Maneuver your heavy work bench with ease! These easy-spin 23/8" urethane casters feature a foot-activated lift mechanism that engages or disengages with the touch of your toe. Engage them to lift your bench 3/4" off the floor for mobility, disengage them for stability. Each caster is constructed of durable steel and rated for 100 lbs (400 lbs. total kit capacity). Includes all mounting screws. Set of four. 43501 . . . . . . . . . . .$ 79.99

ONLINE VIDEO!

Rockler® Quick-Release Workbench Caster Plates Lets you quickly remove your Workbench Casters (43501, sold separately) so you can access all sides of your workstation without obstructions. If you have an overhang, it also maximizes storage space beneath it. Just remove the pins, and the casters slide out. Includes hardware for mounting to 3/4" panel. Powder-coated steel. 4-pack. 53004 . . . . . . . . . . . . . . . . . . . . . . . . .$ 24.99 pk.

ONLINE VIDEO! Easier

storage in tight spaces. No protruding caster arms

★ Special shipping charges apply. Ask for specific charges when ordering.

European Beech Workbenches These robust European beech benches have solid bolted-and-doweled stretcher-to-leg joinery for stability. Two cast iron wood vises offer a complete undermounted assembly. 331/2" tall and 195/8" wide. 11/8" solid top is laminated and banded by a 31/2" thick apron. Bench dog holes for multiple clamping options. Includes four 4" x 3/4" steel bench dogs and all assembly components. ★ 37545 Medium (605/8" L, 112 lbs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 549.99 ★ 31719 Large (721/2" L, 124 lbs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 599.99

31719

Centipede Collapsible Work Table Expands in seconds from a compact, lightweight package to a spacious work station that can support up to 1,500 lbs! 6" x 9" x 38" collapsed, 2' x 4' x 303/4" expanded. Multiple points of contactv support a flat sheet to create a table, or slip a couple of 2x4s into the included X-Cups to create two sawhorses. Includes rugged storage bag. 54554 . . . . . . . . . . . . . . . . . . . . . . $ 69.99

Rockler® T-Track Table Top A new breed of work table! Spacious top with integrated T-Track allows you to secure workpieces of all shapes and sizes for cutting, sanding, finishing or assembly. T-track accepts 5/16" and 1/4" T-bolts, as well as 1/4" hex bolts. Mounts easily Rockler's Steel Shop Stand. Top measures 28" x 40". 46654 T-Track Table Top . . . . $ 249.99 48089 Steel Shop Stand ,

24" x 36" x 32"H . . . . . $ 139.99

More details on page 51

ONLINE VIDEO!

Workbench Leg Kit With 2x4s and plywood you can create a workbench—in less than an hour. Resin material is stronger than steel and can handle up to 1000 lbs. per shelf. Use full sheets of plywood for a work bench or make a power tool stand as small as 2'x2'. All you need is a drill and a saw. 36" tall. Set of four complete with assembly hardware. 48509 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 69.99

65

Shop Setup

rockler.com


01172018144124

ONLINE VIDEO!

MagKeep No mon orcordsa tooin or rare ethicknpencisee thper p 42388

Rockler Anti-Fatigue Mat Nothing makes a better welcome mat for your workbench and stationary tools than Rockler's soft, inviting anti-fatigue mat. Made of 3/8" thick vinyl foam, it relieves soreness and fatigue in your legs and back, and provides a barrier against cold shop floors. Pebbled texture for grip. Beveled on all four sides. 24" x 60". 45488 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 29.99

Rockler® All-Terrain Mobile Base Huge urethane casters steamroll over cracks, cords and uneven terrain, while a rugged 800-pound load capacity, kick-action wheel locks, and an expandable steel frame provide superior strength and versatility. The base adjusts from 18" x 18" to 28" x 28". Extension Set A replaces two original stretchers with a longer pair, extending the base-length to between 26" and 36". Extension Set B adds four stretchers to the original frame, pushing the overall base-length to between 36" and 50". For even more range, use two extension sets! Two Set A's will extend the frame up to 36" x 36". Two Set B's will reach up to 50" x 50". Patent pending.

22672 All-Terrain Mobile Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 219.99 28774 Extension Set A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 22.99 28834 Extension Set B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 32.99

Bench Cookie® Plus Sawhorse Clips Keep workpieces steady and damage-free on your sawhorses! Just screw these clips to your Bench Cookie Plus, then clip over the sawhorse for a no-mar, no-slip work surface. Fits over 2x material (11/2" thick). 43624 Sawhorse Clips, 4-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 10.99 Bench Cookie® Plus and Sawhorse Clips Kit 45571 4-pack of Work Grippers and Sawhorse Clips . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Power Tool Mobile Base System Cam-action "master caster" lift attaches and detaches without tools using just two threaded pins. 600 lb. rating makes it ideal for work benches and otherwise stationary power tools. Raises tools approx. 3/4" off the floor. Requires 11/2" square hardwood stock of any length to assemble a mobile base of any size. 92051 . . . . . . . . . . . . . . . . . . . . . . . . . $ 69.99

HTC Universal Mobile Bases Features four heavy-duty 3" wheels and "parks" on rubber feet when stationary. Adjust in 1" increments. Adjusts to a maximum square of 38" or rectangle of 22" x 54". 28907 HTC3000, 700 lb. . . . . . $ 114.99 PM2500 Power Tool Mobile Base Adjusts in 1" increments to fit anything from 12" x 12" to 36" x 36". 54480 PM2500, 650 lb. . . . . . . . $ 89.99

28907

92051

ONLINE VIDEO!

ONLINE VIDEO!

BroaApro Wide with Ystrap comfothe styour pockein sizhardwto peTwo hpolyewaist 48974

Benc Combearpluplugs 52821 54801

Sawhorse Supports Cure the saddleback on your "sawhorse workbenches". Just slip onto the horses and add two 2 x 4s in any length you desire to create a strong, stable base. Use the base alone for sawing sheets of plywood without the risk of bowing or binding, and to keep drop-off pieces from falling. Add a sheet of plywood as a top for a sturdy, portable work table. Includes screws to secure brackets to 2 x 4s. Sized for use with 2 x 4 sawhorses. Steel. Pack of 4. Patent pending. 48830 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 pk.

ONLINE VIDEO!

Rock Straddlines fstoragpenci 56094

Kreg KWS1000 Mobile Project Center Clamping station and sawhorse in one—folds up for easy portability! Automaxx Bench Clamp slides into T-track for horizontal clamping, or into side slots for vertical clamping. Connect two of these end-to-end for an even larger surface. Top has built-in screw trays and drill holsters. Includes four swiveling bench dogs and bushings for a sacrificial 2x4. 51585 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 159.00

Supports up to 800 pounds!

Bench Cookie® Plus Work Grippers These handy discs use two high-friction rubber pads to keep projects from slipping while sanding, routing, carving and more. Plus, they protect your work and raise it up for easy access to edges. Use with Bench Cookie Risers (sold separately) to add clearance beneath the workpiece for sawing and other tasks. 46902 4-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 11.99

66

Shop Setup

800-279-4441


01172018144510

12-Gauge 30' Electric Cable Reel 12-gauge cord gives you plenty of power for heavy tools and motors! Spring-loaded reel mounts to a wall or ceiling with attached bracket. 30' cord locks at any length. Cord includes three receptacles. 20323 . . . . . . . . . . . . . . . . . . . . . . $ 99.99

Magnetic Cord Keeper No more stepping on or tripping over cords, checking if a tool is plugged in or not! Features a rare earth magnet that holds a standard-thickness power cord and keeps cords, pencils, even bits, right where you can see them. 11/2" diameter x 7/8" thick. 2 per pack. 42388 . . . . . . . . . . . . . . . . . . . . $ 7.99 pk.

29.99

Kaizen Tool Storage Foam Sheets Imagine a workshop so clean and organized that you can find your tools with a blindfold on. Unlike ordinary foam, Kaizen foam is layered so you can peel out layers until you reach the required depth. Cut to size in seconds with a table saw. Also works great for vertical storage. 2' x 4' Sheet. 43845 11/8" Thick . . . . . . . . . . . . $ 14.99 46430 21/4" Thick . . . . . . . . . . . . $ 22.99

Safety Power Tool Switch No need to panic with our hands-free panic button. Just bump the “Stop Paddle" to quickly shut off power. Large, bright paddle is easy to find when you're in a tight spot. Locate it near your hip or knee and you'll never have to take your hands off the workpiece. Great for use with router tables or any workbench where you use a stationary power tool. Heavy-duty 15 amp switch. Includes 7' grounded cord to outlet and 2' female cord to power tool for quick plug-in and use. 20915 . . . . . . . . . . . . . . . . . . . . . . $ 39.99

ONLINE VIDEO!

and nary. a e of

4.99

ing

89.99

28907

Broad Shoulder Apron Wide shoulder straps with Y-shaped back strap distribute weight comfortably, taking the strain off of your neck. 17 pockets ranging in size from large hardware pouches to pencil pockets. Two heavy-duty polyester hammer loops. Quick-release buckle on waist strap. Made from 14 oz. duck cotton. 48974 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Rockler® Cross-Back Shop Apron A generous cut with spacious pockets and comfortable straps that shift the weight from your neck to your shoulders. Long length for good leg coverage. Highly adjustable straps with quick-clip closure. Durable 14 oz. cotton duck construction. Apron minus straps: 35"W x 31"H. Maximum waist size: 57". 53853 . . . . . . . . . . . . . . . . . . . . . . $ 29.99

Our popular apron is back and better than ever!

Bench Dog® Soundshield Safety Glasses Combines a pair of safety glasses with retractable earplugs that store inside the frame! Just open the hinged doors and pull out the plugs, which are attached to tethers—no more lost earplugs! 52821 Fit Over Glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99 54801 Standard Fit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99

StandardStyle

Fit Over Glasses Style

Rockler® Center/Offset Marking Tool Straddles your board to mark a perfectly centered line, or use the notches to mark offset lines from 1/16" to 1/2" from the edge in 1/16" increments. Embedded magnet allows storage on ferrous metal objects. Onboard pencil storage slot. Accepts standard wooden pencil (not included). 56094 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 9.99 tical

built-s for

59.00

ng it

dd

1.99

Rockler® Story Stick Kit Slide the indicators onto a 1/2" dowel, 1/2" square tubing, Rockler T-Track or a strip of 3/8" x 3/4" scrap wood and set to indicate drawer, shelf or dado spacing. Then use the hook as you would a tape measure to transfer the positions to your cabinet components. With fixed indicators, you get consistent spacing and less risk of mismeasurement. With a long enough stick, you can use it to mark window and door locations when measuring a room for cabinets. Includes (4) indicators and (1) hook stop. Stick/dowel not included. 58376 . . . . . . . . . . . . . . . . . . . . . . $ 29.99

The easiest way to mark accurate spacing for cabinet projects

Check out more styles of shop aprons at rockler.com

67

Shop Setup

rockler.com


01172018144510

Oak, Red

Ash, White

Chakta Viga

Mahogany, African

Maple, Hard

Walnut,Black

Cherry

Oak, White(Quartersawn)

Katalox

Cedar, Spanish

Wenge

Redheart

Hardwood Assortments Mixed species or basswood: Sizes range from 2" to 10" wide and 6" to 15" long. Thicknesses may include 1/2", 3/4" and 13/4" pieces. Exotics: Lengths range from 2" to 12"; widths and thicknesses vary widely.19554 Mixed Species , Aprox. 20 lbs. $ 29.99

Why buy dimensional lumber? • Lumber is surfaced top and bottom with straight edges and is guaranteed

to be clear and free of defects on three sides. • Pieces are the perfect size for small projects. • Rockler has a great selection of a variety of species. • Pre-cut pieces eliminate guessing and minimize project waste.

Species Name (Alphbetical Order)3"-5"Width

24"-48"Length

1/8"Thick

Price Each

1/4"Thick

Price Each

1/2"Thick

PriceEach

3/4"Thick

PriceEach

Ash, White

3" 24" 39557 $ 4.49 30887 $ 4.99 32802 $ 4.99 34328 $ 4.99

3" 48" 30689 $ 8.99 38024 $ 9.99 33187 $ 9.99 33912 $ 9.99

5" 24" 32766 $ 6.99 38213 $ 7.39 37868 $ 7.99 39501 $ 7.99

5" 48" 39732 $ 13.99 34482 $ 14.99 34118 $ 15.69 39492 $ 15.99

Bocote 3" 24" 32885 $ 12.99 37363 $ 16.99 33515 $ 19.99 34490 $ 24.99

Bubinga3" 24" 24008 $ 7.99 20568 $ 10.99 36062 $ 10.99 33546 $ 11.99

5" 24" 20555 $ 14.99 22043 $ 15.99 38263 $ 18.99 32845 $ 20.99

Cedar, Spanish

3" 24" 65016 $ 7.99 65108 $ 8.99 — — — —

5" 24" 65202 $ 11.99 65295 $ 12.99 — — — —

5" 48" — — 65341 $ 25.99 — — — —

Chakta Viga3" 24" 43823 $ 11.99 46308 $ 15.99 48940 $ 18.99 46704 $ 21.99

3" 48" — — — — — — 48495 $ 59.99

Cherry

3" 24" 65000 $ 7.99 65092 $ 8.99 32849 $ 9.99 31806 $ 9.99

3" 48" 65047 $ 13.99 65139 $ 15.99 31216 $ 19.99 31726 $ 21.99

5" 24" 65186 $ 11.99 65279 $ 12.99 36109 $ 15.99 34467 $ 11.99

5" 48" 65232 $ 24.99 65325 $ 25.99 32419 $ 29.99 38391 $ 24.99

Cherry, Curly3" 24" — — — — 33727 $ 12.99 33512 $ 15.99

5" 24" — — — — 38488 $ 22.99 33752 $ 26.99

Granadillo 3" 24" 49381 $ 11.99 48664 $ 16.99 — — 47840 $ 21.99

Katalox 3" 24" 47995 $ 11.99 46776 $ 16.99 49240 $ 19.99 48002 $ 21.99

Leopardwood3" 24" 51678 $ 10.99 54371 $ 11.99 50404 $ 12.99 52144 $ 14.99

5" 24" 57154 $ 15.99 59283 $ 18.99 56063 $ 22.99 53221 $ 24.99

Mahogany, African

3" 24" 64992 $ 7.99 65084 $ 8.99 31838 $ 6.99 37166 $ 6.99

3" 48" 65039 $ 14.99 65131 $ 16.99 32980 $ 9.99 37427 $ 13.99

5" 24" 65178 $ 14.99 65271 $ 15.99 36064 $ 12.99 35847 $ 12.99

5" 48" 65224 $ 21.99 65317 $ 26.99 34517 $ 24.99 36355 $ 24.99

Maple, Hard

3" 24" 64977 $ 7.99 65069 $ 8.99 37482 $ 8.99 38742 $ 8.99

3" 48" 65023 $ 14.99 65116 $ 15.99 31687 $ 17.99 38334 $ 9.99

5" 24" 65162 $ 11.99 65256 $ 13.99 33695 $ 13.99 35623 $ 8.99

5" 48" 65209 $ 24.99 65303 $ 26.99 38143 $ 27.99 35385 $ 27.99

Sustainable Forestry Award!For years Rockler has worked with the Hardwood Forestry Fund to keep America’s forests growing strong. Rockler CEO Ann Jackson was honored to receive the Fund’s 2014 Gifford Pinchot Award, presented for “significant corporate achievements in promoting sustainable forestry.” Details at: www.hardwoodforestryfund.org

Many more species and sizes at rockler.com/wood

Spe

Map

Mor

Oak

Oak

Pad

Pur

Red

Ros

Ros

Wa

We

Yel

Zeb

Bass Pre-mto 11/an ad 52737 50242

29137 Basswood , Aprox. 20 lbs. . . . .$ 31.9928047 Exotic, Aprox. 10 lbs.. . . . . . . .$ 29.99

Live Edge Wood Slabs• Every slab is one of a kind!

• New slabs added regularly

• Also available at your local Rockler store (see page 130 for locations)

Check them out at rockler.com/slabs

68

Dimensional Lumber (Lumber by the Piece) Note: Inventory for some species is based on availability Note

800-279-4441


01172018144756

Rosewood,Bolivian

Bubinga

Maple, Curly Soft

Cherry, Curly

Padauk

Purpleheart

Yellowheart

Leopardwood

Bocote

Rosewood, Yucatan

Mora

Granadillo

Zebrawood

cech99

99

99

.99

.99

.99

.99

—

—

—

.99

.99

99

.99

.99

.99

.99

.99

.99

.99

.99

.99

99

.99

.99

.99

99

99

99

.99

2014 or in

etails g

Species Name (Alphbetical Order)3"-5"Width

24"-48"Length

1/8"Thick

Price Each

1/4"Thick

Price Each

1/2"Thick

PriceEach

3/4"Thick

PriceEach

Maple, Soft Curly

3" 24" 31101 $ 8.99 35257 $ 9.99 36016 $ 11.99 36839 $ 13.99 3" 48" 36703 $ 16.99 38338 $ 18.99 35025 $ 15.99 37966 $ 26.99 5" 24" 34278 $ 15.99 32892 $ 17.99 35553 $ 15.99 33607 $ 18.99 5" 48" 39385 $ 29.99 31549 $ 31.99 38734 $ 37.99 36564 $ 36.99

Mora 3" 24" — — 33565 $ 15.99 34798 $ 15.99 31624 $ 19.99

Oak, Red

3" 24" 64985 $ 7.99 65076 $ 9.99 — — — —3" 48" 65031 $ 12.99 65123 $ 13.99 — — — —5" 24" 65170 $ 10.99 — — — — — —5" 48" 65216 $ 19.99 65310 $ 22.99

Oak, White (Quartersawn)

3" 24" 52402 $5.99 31789 $ 8.99 39053 $ 9.99 37503 $ 7.99 3" 48" — — 38602 $ 14.99 38942 $ 13.99 35282 $ 14.99 5" 24" 34669 $12.99 33968 $ 14.99 37271 $ 9.99 30670 $ 10.99 5" 48" — — 32282 $ 31.99 32258 $ 21.99 36479 $ 24.99

Padauk

3" 24" 21993 $ 8.99 — — 30688 $ 9.99 32816 $ 10.99 3" 48" — — — — 33683 $ 18.99 35640 $ 19.99 5" 24" 27785 $ 16.99 29349 $ 18.99 32612 $ 13.99 39769 $ 19.99 5" 48" — — — — 36745 $ 26.99 30327 $ 31.99

Purpleheart

3" 24" 23360 $ 8.99 26339 $ 9.99 34551 $ 10.99 35897 $ 10.49 3" 48" 27416 $ 15.99 23476 $ 17.99 33320 $ 19.99 38020 $ 24.99 5" 24" 28005 $ 13.99 27746 $ 14.99 36340 $ 19.99 38959 $ 19.99 5" 48" 26956 $ 26.99 22725 $ 29.99 31418 $ 31.99 35425 $ 39.99

Redheart 3" 24" 44194 $ 12.99 46674 $ 16.99 48598 $ 19.99 46053 $ 24.99

Rosewood, Bolivian

3" 24" 28579 $ 12.99 24884 $ 13.99 — — — —3" 48" 28750 $ 26.99 23749 $ 27.99 — — — —5" 24" 21036 $ 22.99 26852 $ 24.99 — — — —5" 48" 22025 $ 44.99 26524 $ 47.99 — — — —

Rosewood, Yucatan 3" 24" 33851 $ 17.99 — — — — — —

Walnut, Black

3" 24" 65008 $ 7.99 65100 $ 8.99 38211 $ 8.99 38915 $ 8.99 3" 48" 65055 $ 14.99 65147 $ 15.99 39288 $ 19.99 39311 $ 19.99 5" 24" 65194 $ 11.99 65287 $ 14.99 33815 $ 19.99 38991 $ 19.99 5" 48" 65240 $ 24.99 65333 $ 29.99 31022 $ 29.99 30922 $ 29.99

Wenge3" 24" 29043 $ 12.99 27291 $ 13.99 30306 $ 17.99 30463 $ 24.99 5" 24" 26403 $ 19.99 26123 $ 21.99 34583 $ 29.99 33256 $ 39.99

Yellowheart 3" 24 36239 $ 7.99 30113 $ 8.99 33528 $ 9.99 32385 $ 11.99

Zebrawood3" 24" 28966 $ 11.99 21916 $ 13.99 35052 $ 14.99 31201 $ 19.99 5" 24" 29889 $ 19.99 26670 $ 21.99 38783 $ 24.99 30907 $ 32.99

Precut Plywood High quality A2 grade veneer core plywood. The front and back are the same species. Nominal size. Additional shipping charge of $10 per order. Each price. 24" x 48" EachMaple 46428 1/4" $ 24.99 45301 3/4" $ 39.99 Red Oak 43838 1/4" $ 24.99 45883 3/4" $ 39.99

24" x 48" EachCherry 44133 1/4" $ 29.99 49690 3/4" $ 44.99 Walnut 49897 1/4" $ 29.99 49934 3/4" $ 49.99

Basswood Shutter Stock Pre-milled frame stock. Solid basswood. Planed to 11/16" thick. Lengths longer than 60" require an additional $10.00 shipping charge per order. $/Linear Inch 52737 5"W x 11/16" Thick . . . . . . . . . . . . $ .39 50242 21/4"W x 11/16" Thick . . . . . . . . . . . $ .18

Baltic Birch Plywood Thicker face veneers, greater screw-holding power and void-free cores make this ideal for jigs, drawer boxes and more. Greater number of inner plies made from equal thicknesses of birch (not secondary softwood) create attractive edge. Nominal size. BB/BB grade.12" x 30" Each 23482 1/8" . . .$ 6.99 63388 1/4" . . .$ 6.99 63404 1/2" . . .$ 9.99 63412 3/4" . .$ 14.99

24" x 30" Each 23490 1/8" . . .$ 9.99 63420 1/4" . .$ 10.99 63446 1/2" . .$ 15.99 63453 3/4" . .$ 21.49

13 Ply9 Ply

5 Ply 3 Ply

69

bility Note: Inventory for some species is based on availability (Lumber by the Piece) Dimensional Lumber

rockler.com


01172018144811

Scre 50 pe 20479 20495 62224 20503 20529 20537 20545 20552 20560 3/4" 10 pe 20651 20669 20677

36" B 20701 62216 20719 20735 20743 20750 20768 20776 20784 20792 20800

36" C 21055 21063 21071 21089 21097 21105

Pock Madethoseprote 41819

Cabinet Refacing Banding Easy-to-apply pressure sensitive banding is perfect for covering face frames. 23/8" x 25 ft. 90034 Red Oak . . . . . . . . . . . . . $ 49.99 26620 Maple . . . . . . . . . . . . . . . $ 49.99 26371 Cherry . . . . . . . . . . . . . . . $ 49.99

Pressure Sensitive Veneer Our “peel-and-stick" veneers are available in convenient sheet sizes. Cut the veneer to size with scissors, peel off the backing, apply and smooth with a tool like a high-pressure roller. Permanently bonds to wood, glass, plastic and metal. Not recommended for use on fir plywood. Grain runs lengthwise. Unfinished.

10 Mil Paper Backed Veneer With Pressure-Sensitive AdhesiveSpecies 24" X 32" Ash . . . . . . . . . . . . . . . . 33344 . . $ 34.99 Birch. . . . . . . . . . . . . . . 37791 . . $ 34.99 Cherry . . . . . . . . . . . . . 37594 . . $ 34.99 Hickory. . . . . . . . . . . . . 36867 . . $ 34.99 Mahogany, African Plain Sliced. . . . . . . . . . . . . . . . . . . . . . . . . . . 37328 . . $ 34.99 Maple. . . . . . . . . . . . . . 33095 . . $ 34.99 Red Oak. . . . . . . . . . . . 35650 . . $ 34.99 Walnut. . . . . . . . . . . . . 37103 . . $ 34.99 White Oak. . . . . . . . . . 37369 . . $ 34.99 White Oak, Qtr. Sliced 38601 . . $ 34.99

Species 24" X 96" Ash . . . . . . . . . . . . . . . . . 73507 . . $ 84.99 Cherry . . . . . . . . . . . . . . 14274 . . $ 84.99 Hickory. . . . . . . . . . . . . . 23400 . . $ 84.99 Mahogany, Pln. Sliced 84682 . . $ 84.99 Maple. . . . . . . . . . . . . . . 61323 . . $ 84.99 Red Oak, Plain Sliced . . 14241 . . $ 84.99 Walnut, Plain Sliced . . . 14266 . . $ 84.99 White Birch . . . . . . . . . . 14233 . . $ 84.99 White Oak, Pln. Sliced 14258 . . $ 84.99 White Oak, Qtr. Sliced 61332 . . $ 84.99

FastCap Quad Edge Banding Trimmer Trims both edges at once with a push or pull motion. Easily pulls apart to trim one edge only for following difficult grain. Pneumatic spring action means no metal springs to lose or break. For material 1/2" to 11/4" thick. Two carbon steel blades included. Made in USA. 45318 Trimmer . . . . . . . . . . . . . $ 19.99 44653 Repl. Blades, 2-Pk. . . . . . $ 10.99

50014

High Pressure J-Roller Ergonomically contoured handle and robust grips let you apply maximum pressure with minimal effort. 143/4" handle. 3" roller with one flush end for easy access to corners. 50014 . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Veneer Saw Sturdy double edged blade is great for flush cuts. 43901 Saw . . . . . . . . . . . . . . . . . $ 17.99 44024 Replacement Blade . . . . . $ 7.99

SpeedTape Double-Sided Edging Tape Apply veneer, edging and even small moldings. Peel off one liner, apply tape, peel off the other liner, and roll on your edging. Adhesive increases in strength as it cures for a long-lasting permanent bond. Waterproof. 1" x 50' Roll. 45846 . . . . . . . . . . . . . . . . . . . . . . $ 11.99

Species 24" x 32" Red Oak. . . . . . . . . . . 39040 . . . . $ 24.99 Maple. . . . . . . . . . . . . 39858 . . . . $ 24.99 Cherry . . . . . . . . . . . . 34964 . . . . $ 24.99 Birch. . . . . . . . . . . . . . 35846 . . . . $ 24.99 Walnut. . . . . . . . . . . . 36502 . . . . $ 24.99 White Oak . . . . . . . 34475 . . . . $ 24.99 Mahogany . . . . . . . . . 38335 . . . . $ 24.99 White Ash . . . . . . . . . 32846 . . . . $ 24.99

Allwood Two Ply Veneer Premium. Two sizes. A-grade face veneer with a second ply of a similar species for superior flexibility and for the rich look of solid wood without the "black line." No telegraphing and checking, very easy to work with. Grain runs lengthwise. Unfinished.

Species 24" x 96" Red Oak. . . . . . . . . . . 21354 . . . . $ 54.99 Maple. . . . . . . . . . . . . 21375 . . . . $ 54.99 Cherry . . . . . . . . . . . . 21389 . . . . $ 54.99 Birch. . . . . . . . . . . . . . 21403 . . . . $ 54.99 Walnut. . . . . . . . . . . . 21466 . . . . $ 54.99 White Oak . . . . . . . 21480 . . . . $ 54.99 Mahogany . . . . . . . . . 21431 . . . . $ 54.99

4-Way Match Veneers Offered in some of the most stunning and exotic grain patterns. Create beautiful, symmetrical patterns with the grain converging at the middle of a four-way juncture, often in a striking diamond pattern. Straight, parallel edges, and defect-free for minimal waste. Sheet sizes are 8" x 18". Packs of 4 square feet. 4 sheets per pack. 49704 Ash Burl . . . . . . . . . . . . . . $ 36.99 43776 Myrtle Burl . . . . . . . . . . . $ 40.99 45306 Maple, Birdseye . . . . . . . $ 37.99 45779 Mahogany Crotch . . . . . $ 46.99 46487 Maple Burl . . . . . . . . . . . $ 45.99 43953 Walnut Burl . . . . . . . . . . $ 45.99

45779 Mahogany Crotch

Find a widevariety of beautiful veneers and tools at rockler.com/veneer

Dow Fine qsandedowe

70

Veneer

800-279-4441

070-071 8P SR.indd 70070-071 8P SR.indd 70 1/18/18 3:08 PM1/18/18 3:08 PM

01182018150929

20479 20578 20818 23515

Sizes and species may be mixed to earn the quantity discount.

Screw Hole Buttons 50 per Pack Pack 10 + Pks. 20479 Birch 3/8" . . . . . $ 3.99 $ 3.59 20495 Birch 1/2" . . . . . $ 3.99 $ 3.59 62224 Oak 1/4" . . . . . $ 3.99 $ 3.59 20503 Oak 3/8" . . . . . $ 3.99 $ 3.59 20529 Oak 1/2" . . . . . $ 4.49 $ 4.04 20537 Walnut 3/8" . . . $ 4.99 $ 4.49 20545 Walnut 1/2" . . . $ 5.49 $ 4.94 20552 Cherry 3/8" . . . $ 4.99 $ 4.49 20560 Cherry 1/2" . . . $ 4.99 $ 4.49 3/4" Screw Hole Buttons 10 per Pack Pack 10 + Pks. 20651 Birch 3/4" . . . . . $ 4.49 . . . $ 4.04 20669 Oak 3/4" . . . . . $ 4.49 . . . $ 4.04 20677 Walnut 3/4" . . . $ 5.49 . . . $ 4.94

Wood Plugs 50 per Pack Pack 10 + Pks. 20578 Birch 3/8" . . . . . $ 4.49 . . . $ 4.04 20594 Birch 1/2" . . . . . $ 4.49 . . . $ 4.04 20602 Oak 3/8" . . . . . $ 4.49 . . . $ 4.04 20628 Oak 1/2" . . . . . $ 4.49 . . . $ 4.04 20636 Walnut 3/8" . . . $ 4.99 . . . $ 4.49 20644 Walnut 1/2" . . . $ 4.99 . . . $ 4.49 20685 Cherry 3/8" . . . $ 4.49 . . . $ 4.04

Flat Top Plugs 50 per Pack Pack 10 + Pks. 20818 Birch 3/8" . . . . . $ 4.49 . . . $ 4.04 20834 Birch 1/2" . . . . . $ 4.49 . . . $ 4.04 20842 Oak 3/8" . . . . . $ 4.49 . . . $ 4.04 20867 Oak 1/2" . . . . . $ 4.49 . . . $ 4.04 20875 Walnut 3/8" . . . $ 4.49 . . . $ 4.04 20883 Walnut 1/2" . . . $ 4.49 . . . $ 4.04 20891 Cherry 3/8" . . . $ 4.49 . . . $ 4.04 20909 Cherry 1/2" . . . $ 4.49 . . . $ 4.04

Face Grain Plugs Blends naturally with woodwork by absorbing stain more consistently. Plugs are 1/4" high with tapered sides for easy insertion.

50 per Pack Pack 10 + Pks. 23515 Oak 3/8" . . . . . $ 6.99 . . . $ 6.29 23523 Oak 1/2" . . . . . $ 6.99 . . . $ 6.29 23499 Birch 3/8" . . . . . $ 6.99 . . . $ 6.29 23507 Birch 1/2" . . . . . $ 6.99 . . . $ 6.29

36" Oak Each 10 + 20917 1/4" . . . . . . . . . $ 1.49 $ 1.34 20933 3/8" . . . . . . . . . $ 2.49 $ 2.24 20941 1/2" . . . . . . . . . $ 3.49 $ 3.14 20958 5/8" . . . . . . . . . $ 3.99 $ 3.59 20966 3/4" . . . . . . . . . $ 5.49 $ 4.94 20974 1" . . . . . . . . . . . $ 6.49 $ 5.84 62232 11/4" . . . . . . . . $ 10.99 $ 9.89

36" Birch Each 10 + 20701 1/8" . . . . . . . . . . $ .60 . . . . $ .54 62216 3/16" . . . . . . . . . $ .75 . . . . $ .68 20719 1/4" . . . . . . . . . . $ .85 . . . . $ .77 20735 5/16" . . . . . . . . . $ .95 . . . . $ .86 20743 3/8" . . . . . . . . . . $ .99 . . . . $ .89 20750 7/16" . . . . . . . . $ 1.49 . . . $ 1.34 20768 1/2" . . . . . . . . . $ 1.49 . . . $ 1.34 20776 5/8" . . . . . . . . . $ 2.49 . . . $ 2.24 20784 3/4" . . . . . . . . . $ 2.99 . . . $ 2.69 20792 1" . . . . . . . . . . . $ 5.49 . . . $ 4.94 20800 11/4" . . . . . . . . . $ 7.99 . . . $ 7.19

36" Cherry Each 10 + 21055 1/4" . . . . . . . . . $ 3.49 . . . $ 3.14 21063 3/8" . . . . . . . . . $ 3.99 . . . $ 3.59 21071 1/2" . . . . . . . . . $ 4.99 . . . $ 4.49 21089 5/8" . . . . . . . . . $ 6.49 . . . $ 5.84 21097 3/4" . . . . . . . . . $ 6.99 . . . $ 6.29 21105 1" . . . . . . . . . . . $ 8.99 . . . $ 8.09

48" Walnut Each 10 + 23457 1/2" . . . . . . . . . $ 7.99 . . . $ 7.19 23465 3/4" . . . . . . . . .$ 14.99 . . $ 13.49 23473 1" . . . . . . . . . $ 18.99 . . $ 17.09 23481 11/4" . . . . . . . . $ 26.99 . . $ 24.29

Large Diameter Dowel Rods Laminated then smoothly machined and sanded. Use for table legs, spindles and more! Each rod is 30" long. 10924 21/2" Maple . . . . . . . . . . $ 42.99 10952 3" Maple . . . . . . . . . . . . $ 62.99 10966 3" Oak . . . . . . . . . . . . . $ 62.99 10938 21/2" Cherry . . . . . . . . . . $ 59.99 10973 3" Cherry . . . . . . . . . . . . $ 79.99

48" Oak Each 10 + 23416 1/2" . . . . . . . . . $ 4.49 . . . $ 4.04 23424 3/4" . . . . . . . . . $ 8.99 . . . $ 8.09 23432 1" . . . . . . . . . .$ 10.99 . . . $ 9.89 23440 11/4" . . . . . . . . $ 17.99 . . $ 16.19

36" Walnut Each 10 + 20982 1/4" . . . . . . . . . $ 3.49 . . . $ 3.14 21006 3/8" . . . . . . . . . $ 3.99 . . . $ 3.59 21014 1/2" . . . . . . . . . $ 4.99 . . . $ 4.49 21022 5/8" . . . . . . . . . $ 6.99 . . . $ 6.29 21030 3/4" . . . . . . . . . $ 7.99 . . . $ 7.19 21048 1" . . . . . . . . . .$ 10.99 . . . $ 9.89

Pocket Flush Trim Pull Saw Made from paper-thin flexible spring steel. 18 TPI blade lets you get up close for those difficult trim cuts. Stays locked when open and folds for easy storage and blade protection. The .015" thin blade flexes to handle any job. 41819 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 9.99

1X Miller Dowel System 62872 Quick-Drill Kit . . . . . . . . . $ 34.99 20300 Tru-Fit Drill Bit . . . . . . . . $ 19.99 1X Dowels, 40-Pack 28358 Birch . . . . . . . . . . . . . . . . . . . . .$ 9.99 25364 Oak . . . . . . . . . . . . . . . . . . . . $ 11.99 26053 Cherry . . . . . . . . . . . . . . . $ 14.99 21366 Walnut . . . . . . . . . . . . . . $ 14.99

Mini-X Miller Dowel System 21747 Quick-Drill Kit . . . . . . . . . $ 25.99 21463 Tru-Fit Drill Bit . . . . . . . . $ 10.99 Mini-X Dowels, 100-Pack 23696 Birch . . . . . . . . . . . . . . . . . . . $ 14.99 21805 Oak . . . . . . . . . . . . . . . . . . . . $ 16.99 27462 Cherry . . . . . . . . . . . . . . . . . $ 24.99 20464 Walnut . . . . . . . . . . . . . . . . . $ 24.99

Miller Dowel System Use for a wide variety of joinery and fastening. Creates a self-centering, self-aligning pilot hole for the unique stepped dowels. The 1X system works for boards up to 1" thick, the Mini-X for 1/2" stock. Both Quick-Drill Kits include a stepped drill bit and 50 birch dowels.

See the Joinery Section for additional doweling items

ike

84.99 84.99 84.99 84.99 84.99 84.99 84.99 84.99 84.99 84.99

d

for

9.99

7.99 $ 7.99

Dowel Rods Fine quality and smooth sanded. Minimum order for dowel rods is $5.00.

Sizes and species may be mixed to earn the quantity discount.

71rockler.com

Dowels and Plugs


01182018150929

Mixing Mate® Lids for Paint and Finish Makes stirring and pouring paint and finish as easy and mess-free as pouring syrup from a restaurant-style dispenser. Crank the handle, press the thumb lever and pour. No drips, no mess, no wasted paint or finish. Auger-style paddle lifts pigments from the bottom of the can for an even mix. When you're done, just set the can back on the shelf for storage. Attaches easily with tool-free cam clamps. 44360 Quart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 17.99 44170 Gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 24.99

Mix

Pour

Store

General Finishes Satin Gel Topcoat This easy wipe-on gel won't drip or run and creates a uniform professional quality finish. No sanding between coats and no unpleasant smell! 34379 1/2 Pint . . . . . . . $ 10.99 38154 Pint . . . . . . . . . . $ 14.99 32313 Quart . . . . . . . . $ 23.99

37421 34865 35216 35361 36163

General Finishes Gel Stain The foolproof finishing system! Just wipe on with a clean cloth and you're ensured of professional quality results without brush marks. Dry to the touch in minutes. If you want a darker color, apply another coat of stain in only 6 hours. No sanding needed between coats and no unpleasant smell.

53866 Black, Quart . . . . . . . . . . . . .$ 23.99 37421 Java, Quart . . . . . . . . . . . . . $ 23.99 56418 Java, Gallon . . . . . . . . . . . . $ 69.99 34865 Antique Walnut, Quart . . $ 23.99 35216 Georgian Cherry, Quart . . $ 23.99 35361 Candlelite, Quart . . . . . . . $ 23.99 36163 Brown Mahogany, Quart . $ 23.99

ONLINE VIDEO!

General Finishes Arm-R-Seal Urethane Topcoat Made with the highest quality urethane resin. Wipe-on/brush-on finish is easy to apply and durable. Ships via UPS Ground within the continental U.S.

The Furniture of Sam Maloof (Book) 32546 . . . . . . . . . . . . . . . . . . . . . . . $ 35.00

Maloof's Poly/Oil Finish This custom blend of polyurethane varnish and natural oils was developed by the legendary Sam Maloof to finish his finest pieces. It enlivens grain, adds warmth, and emulates a hand-rubbed satin finish in half the time as pumice and rottenstone. 58636 Pint . . . . . . . . . . . . . . . . . $ 18.99 58644 Quart . . . . . . . . . . . . . . . . $ 34.99 Maloof's Oil/Wax Finish Finish your finish with this combination of oil and beeswax. It creates a look that begs to be touched. For best results, use this topcoat on pieces that won't be exposed to heat or moisture. 58669 Pint . . . . . . . . . . . . . . . . . $ 20.99 58677 Quart . . . . . . . . . . . . . . . . $ 26.99

Finishing Strainer Stand Eliminate unwanted solids and particles from finishes for the best possible finish on your project. Metal stand assembles in seconds, includes 12 paper strainers. Approx. 12" tall and fits over containers as large as a gallon. 40321 Stand . . . . . . . . . . . . . . . $ 24.99 49815 Replacement Cones, 10-Pk $ 3.99

Satin 56598 Pint . . . . . . $ 12.99 56606 Quart . . . . . $ 18.99 Semi-Gloss 20675 Pint . . . . . . $ 12.99 20682 Quart . . . . . $ 18.99 Gloss 56564 Pint . . . . . . $ 12.99 56572 Quart . . . . . $ 18.99 58644 58677

More Gel stain colors and sizes at rockler.com/finishing

We now offer Milk and Chalk-style Paints!

Product details at rockler.com/finishing

Bulls Eye® Clear Shellac A quick-drying finish that is ideal for antiques and fine furniture. All-natural and non-toxic, Shellac is safe for use with children's toys. Blocks all odors. Contains wax. Not to be used as a sealer under polyurethane.15992 Half Pint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.89 16015 Quart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.39

Cedar, before and after Pioneer Wood Patina Mix this powdered concentrate with water and apply to wood to achieve a "barn wood" appearance. Turns brownish gray over a few weeks. Leave unfinished, finish with any topcoat, or seal with a UV blocking finish to halt the aging process. Use for interior or exterior projects. Note: Pine will require exposure to sun and rain to aid the aging process. 56033 Makes 1 Quart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 5.99 57115 Makes 1 Gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 18.99

Earl Use tsynth1.5mmpaint,the 2zinc rpavin 48214 46112 47932

HVL Includfast, estatiopacki 46869

Earl1.5m Spraywith Use fexterisprayfan w13' hshella2.0mm 56736

Earl Spraythe hocoatinair cacap le 56153

72

Finishing and Accessories

800-279-4441


01182018151329

n

drip m

o no

0.99 4.99 3.99

f

35.00

ped sh dds ed ce

18.99 34.99

tion k that , 't be

20.99 26.99

cles nish bles ers. ners

24.99 $ 3.99

h for the

5.99 8.99

K-Grip Siphon Gun Dead-on accurate, easy to clean up, and simple to use – just set the air pressure and adjust the nozzle. Circular spray pattern adjusts from 1/2" to 31/2" in diameter. Durable, lightweight 16 oz. plastic jar doubles as a storage container. Solid metal construction. Requires 3/4 hp compressor or larger (not included). 31715 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 54.99

Earlex Fluid Tip Needles Use the 1.0 mm for cellulose, acrylics, synthetics, polyurethane, and thinner; the 1.5mm for oil base, enamel, varnish, marine paint, water-based stains, lacquers, and shellac; the 2.5mm is for chlorinated rubber, oxide, zinc rich primer, epoxy, plastic additives, floor paving paint, and latex. 48214 1.0mm Fluid Tip Needle . . . . . . . $ 39.99 46112 1.5mm Fluid Tip Needle . . . . . . . $ 39.99 47932 2.5mm Fluid Tip Needle . . . . . . . $ 39.99

HVLP Spray Gun Cleaning Kit Includes five brushes and two nozzle cleaners for fast, efficient clean-up of your HVLP series spray station gun. Grease lets you lubricate the needle packing and other moving parts. 46869 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 15.99

46869

More finishing solutions at rockler.com/finishing

Earlex Spray Station 5500 with 1.5mm and 2.0mm Tips Sprays water- and oil-based coatings with comfort, convenience and ease! Use for cabinets, furniture, interior and exterior doors, shutters, even cars. Three spray patterns with adjustable 1" to 12" fan width. Includes 1-quart container, 13' hose, 1.5mm needle for varnish, shellac etc., and a general-purpose 2.0mm needle. 56736 . . . . . . . . . . . . . . . . . . . . . $ 339.99

22540

35mm Paint Plugs When finishing cabinet doors, a buildup of finish in hinge cup holes can affect hinge fit or cause drips on adjacent surfaces. Reusable plugs are made from heat-resistant acetal polymer and insert easily with a half twist. Sold 6 per set. 25068 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.99 set

For everything else (22540 and 25612)For 35mm cup holes (37749 and 25068)

25068

37749

22540

25068

37749

Sure-Hook 360 and Sure-Hook Universal Mount Hang, spray and rotate almost any work piece for easier finishing and drying! Both Sure-Hooks feature 360º swivel action so you can spray whole pieces touch-free from one angle – just rotate the black part of the arm. The Sure-Hook 360 has a cam-action plug that expands to fit 35mm cup holes in cabinet doors. The Sure-Hook Universal Mount has a versatile 1" screw-mount for spindles, panels and more. Recommended screws for Universal Mount: #8 self-tapping (sold separately). Sure-Hook 360 37749 1-Pack . . . . . . . . . . . . . . . . $ 5.49 33631 12-Pack . . . . . . . . . . . . . . $ 54.99

ONLINE VIDEO!

Sure-Hook Universal Mount 22540 1-Pack . . . . . . . . . . . . . . . . $ 5.49 25612 12-Pack . . . . . . . . . . . . . . $ 54.99

Spare Paint Cup and Lid for Rockler Finishing Sprayer Allows you to store finish in the same container you sprayed it from. Graduated container has metric and imperial scales up to 1 quart/1 liter. Made of durable, translucent plastic, with lid. 56083 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 14.99

Rockler® Finishing Sprayer Sprays anything from lacquer to unthinned latex, with minimal overspray. Powered by Earlex HVLP technology. Spray pattern is adjustable from 1" to 12" wide. Includes 13' flexible hose, 1 qt. paint cup, 1.5mm and 2.5mm needles and complete instructions. 56405 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 149.99

Rockler and Earlex team up to design a HVLP Spray System for a professional quality finish ... at an affordable price!

Earlex 6003 HVLP SprayPort Sprayer Spray showroom-quality finishes in record time! Quality parts from the turbine, to the hose to the gun. 1200W 3-stage turbine is capable of atomizing thin and thicker coatings. Includes lightweight aluminum, pressure-fed Pro-8 Gun with standard 1.3mm air cap and 2.5mm Wide Spray air cap for a pattern up to 30% larger. 360° rotating air cap lets you spray horizontally or vertically. 56153 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 499.99

73rockler.com



01182018151330

Tack Cloth Gently wipe away dust and fine particles. Chemically treated to remain soft and prevent drying out. 18" x 36". 55905 . . . . . . . . . . . . . . . . . . . . . . . $ 1.99

Disposable Glue Brushes Versatile, affordable horsehair brushes. 1/2" W x 7/8" L. 51/4" handle. Also ideal for small paint or stain jobs. 22304 6-pk. . . . . . . . . . . . . . . . . . $ 2.99 22312 48-pk. . . . . . . . . . . . . . . . $ 14.99

36-Piece Chip Brush Set Great for spreading, this affordable set comes with 1", 11/2" and 2" wide brushes (12 each). Washable and reusable. Unfinished wood handles. 60641 . . . . . . . . . . . . . . . . . . . . . . .$ 19.99

Overnight Brush Storage Container You don't have to clean your brush every time you use it, store it overnight! Durable plastic container holds water or mineral spirits for easy cleaning. Suspends your brush off its bristles, eliminating permanent bends or curves during storage. 40570 . . . . . . . . . . . . . . . . . . . . . . . $ 9.99

Wunderfil TM

Match wood perfectly when filling holes or open-grained species. Colors can be mixed for exact matches! 82347 Natural Oak, Quart . . . . $ 19.99 38572 Maple, 8 oz. . . . . . . . . . . $ 9.99 38548 Light Oak, 8 oz. . . . . . . . $ 9.99 38530 Golden Brown, 8 oz. . . . $ 9.99 38499 Cherry, 8 oz. . . . . . . . . . . $ 9.99 38506 Walnut, 8 oz. . . . . . . . . . . $ 9.99

4690240607

Bench Cookie® Finishing Cones and Bridges These handy accessories snap onto all Bench Cookie Work Grippers! Cones and Bridges lift your project off the bench while maintaining stability. Minimal surface contact with the workpiece means virtually no marring of the finish. The Cones feature pointed tips to lift projects and allow easy access to all edges, and the Bridges feature long ridges with a center notch to support and hold narrow workpieces. Patent pending. 40607 Bench Cookie Finishing Cones, 4-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 5.99 46554 Bench Cookie Finishing Bridges, 4-Pack . . . . . . . . . . . . . . . . . . . . . . . . . .$ 5.99 46902 Bench Cookie Plus Work Grippers, 4-Pack . . . . . . . . . . . . . . . . . . . . . . .$ 11.99

100s of finishing products at rockler.com/finishing

ONLINE VIDEO!

46902 Bench Cookie PlusWork Grippers

46554

46902

40607Cones

46554Bridges

Rockler Mini Finishing Points, 12-Pack Finish the back side, then flip it and finish the face—no need to wait for the back side to dry! Points friction-fit into any T-track that accepts 5/16" T-bolts, or tack them to benches and sawhorses with the included brad nails. Compact and lightweight, a dozen easily fits in an apron pocket, ready for finishing multiple doors at once. 58020 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 7.99

Tack onto your bench Use in a T-track

Blue Bear® Paint and Urethane Stripper Easily strip paint, urethane, acrylic, enamel and some epoxies with no sanding or chiseling and virtually no odor! One quart provides up to 50 square feet of coverage. Previously known as SOY-gel. 54244 Quart . . . . . . . . . . . . . . . . $ 22.99 54439 Gallon . . . . . . . . . . . . . . . $ 79.99

Blue Bear® Cleaner & Degreaser Quickly cleans grime, oil and grease. 100% biodegradable. Formerly known as Emerge. 50136 Quart . . . . . . . $ 9.99 50519 Gallon . . . . . $ 14.99

Blue Bear — the NEW name for SOY-gel

Blue Bear® Paint and Urethane Stripper for Airless Sprayers Specially formulated for use with HVLP and airless sprayers. 52679 Quart $ 22.99 57282 Gallon $ 79.99

HomeRight Spray Shelters Protect surrounding items from overspray and help keep dust from settling on wet finishes. Lightweight and collapses for storage. Large model is bottomless and has fiberglass poles and a mesh entrance screen to keep out insects and debris. Recommended drop cloth size is 12' by 15'. Small model has no separate poles and pops open on its own. It has a bottom, but no entrance screen. 50535 Small, 36"W x 30"D x 39"H . . . . . . . . $ 39.99 59258 Large, 108"W x 72"D x 661⁄2"H . . . . . $ 59.99

59258

H Ri ht S Sh lt

59258

50535

Stea Bendwith to twattaca pla 4282 Woo 4102

CustSelectthe hfrom addredesireassocto you 54404

Two-(Botto

Leaf

Largon dechara

Lar

Cust Torchto selone oallowStand 48893 44660 48719Large 45797 48166 47702

74


800-279-4441


01182018151745

ticles. nd

$ 1.99

de

19.99

oles be

9.99 $ 9.99 $ 9.99 $ 9.99 $ 9.99 $ 9.99

side o dozen

$ 7.99

el

Steam Bending Kit with Steam Box Plan Bend wood to make uniquely-shaped objects. 5.3 quart reservoir with built-in heating element provides continuous steam for up to two hours. Kit includes 10' long steam hose, a brass fitting to attach the hose to your steam box, two hinges, a latch/clasp and a plan with instructions on how to build a steam box. 42826 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 79.99 Wood Bending Made Simple 112 page Book and DVD 41028 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95

ONLINE VIDEO!

Customized Electric Branding Iron Set Select your own customized electric branding head! We ship the handle, along with a voucher to order the branding head from our 15 standard-size designs from the provided Web address. Enter the voucher number and information for the desired branding head or call a Rockler customer-service associate for assistance. Customized branding head ships directly to your address. Please allow 2-3 weeks for delivery. 54404 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 119.99

Make your mark on all of your projects!

Vine (Actual size of large-size design)

Two-line Arc with Tools (Bottom two lines)

Two-line Basic Arc(Bottom two lines)

Leaf

Three-line Oval (18 characters max. per line)

Two-line Arc with Flags (Bottom two lines)

Three-line handsaw(18 characters max. per line)

Large-size designs: Branding iron heads are 1" high; width depends on design. Maximum of 20 characters per line unless noted (width of characters is taken into account). Characters are 1/8" high.

Large-size designsCane

Center Line(18 characters max. per line)

Two-line Custom

Arc with Flags (Actual size of standard-size design)

Scroll

Double Curl (“BY” optional)

Two-line Oval (18 characters max. per line)

Arc with Tools (Bottom line)

Two-line Handsaw(18 characters max. per line)

Double Arc (“BY” optional, 12 char. max. per line)

Initial (12 characters max. Characters are 3/8" high)

Starry Night (right) Starry Night (left)

Basic Arc (Bottom line)

Three-line Custom

Standard-size designs: Branding iron heads are 3/4" high; width depends on design. Maximum of 20 characters per line unless noted (width of characters is taken into account). Characters are 1/8" high.

Standard-size designs

Customized Branding Irons Torch or 120-volt electric heating. You'll receive a voucher number by e-mail to use to select your branding head from a special Web address. If you prefer, call us and one of Rockler's customer-service associates will assist you with the process. Please allow 2-3 weeks for delivery. Standard-size designs 48893 Electric with heat unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 119.99 44660 Electric, custom head only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 79.99 48719 Torch iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 79.99 Large-size designs 45797 Electric with heat unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 129.99 48166 Electric, custom head only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 89.99 47702 Torch iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 89.99

75

Steam Bending and Branding Irons

rockler.com



Rockler® Contour Sanding Grips Ideal for sanding both inside and outside curves on moldings, dowels, edging, fluting etc. Set of six with the following inside/outside diameters: 1/4", 3/8", 1/2", 5/8", 3/4" and 7/8". Flexible rubber adapts to minor variations in diameter. Surface texture helps hold abrasive in place and reduce hand fatigue. 54412 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 set

Rockler® Sandpaper Cutter Cuts standard 9" x 11" sheets of sandpaper down to size with ease and accuracy. Slide a sheet into the slot, align it with the fence and on-board reference lines, then tear it off. Create sheet sizes to fit 1/4-, 1/3- and 1/2-sheet sanders. Use free-hand or mount to wall. 18 gauge galvanized steel. Made in USA. 51415 . . . . . . . . . . . . . . . . . $ 12.99

3M Pro Grade No-Slip Grip Sandpaper Lasts up to 7 times longer than regular sandpaper. Backing texture prevents the folded paper from sliding against itself. Minimizes prematurely wrinkling or tearing. Sand with your entire hand in an open, relaxed position. 9" x 11" sheets. 3-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.99 57626 . . . . . . . 60-Grit 58160 . . . . . . . 80-Grit 52106 . . . . . . 100-Grit 58847 . . . . . . 120-Grit

50635 . . . . . . 150-Grit 51681 . . . . . . 180-Grit 56734 . . . . . . 220-Grit 58683 . . . . . . 320-Grit

20-Pack 29526 60-Grit . . $ 24.99 29517 80-Grit . . $ 24.99 29508 100-Grit $ 19.99 29499 120-Grit $ 19.99 29490 150-Grit $ 19.99

29482 180-Grit $ 14.99 29474 220-Grit $ 14.99 29465 320-Grit $ 14.99 29533 400-Grit $ 14.99

Norton ProSand Sandpaper Faster working, more durable and longer lasting than conventional sandpaper! These premium P-graded aluminum oxide abrasives give you a quick cut with less pressure. 9" x 11" sheets. 3-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.99 49641 60-Grit 45259 80-Grit 46837 100-Grit

49812 120-Grit 43915 150-Grit 46472 180-Grit

48475 220-Grit 46331 320-Grit 44611 400-Grit

Find many more sanding products at rockler.com/abrasives

Rockler® Multi-Roll Sandpaper Dispenser Dispenses sanding strips from the Multi-Roll Sanding Pack (#22134, sold separately). Use integral straight edge to tear off required length. Grits are engraved on dispenser. Mount to wall or bench. Galvanized steel. Made in USA. 55374 . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Multi-Roll Sanding Pack Perfect for lathe work! Five rolls of J-weight, clothbacked sandpaper in 150, 240, 320, 400 and 600 grits. Impregnated with aluminum oxide for long life. Each roll is 1" wide x 20' long. 22134 . . . . . . . . . . . . . . . . . . . . . . $ 19.99

55374

22134

Rockler® Disc Sander Angle Jig Fine-tune miter angles, square pen blank ends, adjust board lengths and edge sand perfect circles. Pivoting fence and large, easy-to-read protractor scale to dial in angles of up to 46° left or right. Miter slot with steel pivoting point and stop to sand circles. Attach any disc sander with a standard 3/8" x 3/4" miter slot and at least 3" between the front edge of the miter slot and the disc. Platform can be cut to fit your sander. 54963 . . . . . . . . . . . . . . . . . . . . . $ 129.99

5" Five-Hole Stick and Sand Designed for five-hole pattern sanders. Pressure-sensitive adhesive, premium aluminum oxide sandpaper. Packs of 50. 22229 80 Grit . . . . . . . . . . . . $ 19.99 pk. 22243 100 Grit . . . . . . . . . . . $ 19.99 pk. 22250 120 Grit . . . . . . . . . . . $ 19.99 pk. 22257 150 Grit . . . . . . . . . . . $ 19.99 pk. 22264 180 Grit . . . . . . . . . . . $ 19.99 pk. 22271 220 Grit . . . . . . . . . . . $ 19.99 pk.

Aluminum Oxide Belts Resin-on-resin bond, X weight 100% cotton backing. 180 and 220 grit are closed coat. All others are open coat. Grit Size Each 93873 . . . . 60X . . . . .4 x 24 . . . . . .$ 4.49 93881 . . . . 80X . . . . .4 x 24 . . . . . .$ 4.49 93899 . . . . 100X . . . .4 x 24 . . . . . .$ 4.49 93906 . . . . 120X . . . .4 x 24 . . . . . .$ 4.49 94144 . . . . .80X . . . . 6 x 48. . . . .$ 11.99

94152 . . . .100X . . . . 6 x 48. . . . .$ 11.99 94160 . . . .150X . . . . 6 x 48. . . . .$ 11.99 94178 . . . .180X . . . . 6 x 48. . . . .$ 11.99

Sm

Stick Fast, glass settinadhesor FleActivaand rDebo 67673 6768 67689 67697 30788 3128 32660 53007 67713 54118

RockApp All yoeasy-StandGlue it easit. Gluglue bpanelcut dofit 16 5736 Sold 5923 4918 4434 4664

76

Sanding

800-279-4441


01182018152046

150, nated ach

19.99

11.99 11.99 11.99

Shop our full line of glues at rockler.com/adhesives

Smart design and non-stick materials make gluing and cleanup easier than ever!

High Pressure Glue Injector The perfect fix for for loose joints, peeling veneer and more. Maintains pressure up to 600 psi for incredible dispensing power. Works with water based glues. Includes one solid brass nozzle with 1/32" opening. 62835 . . . . . . . . . . . . . . . . . . . . . . $ 27.99 24773 Replacement Nozzle, 1/32" Opening . . . . . . . . . . . . . . . . . . . . $ 8.99 27786 Accessory Nozzle, 1/16" Opening . . . . . . . . . . . . . . . . . . . . $ 8.99

Needle Point Glue Injector Applies glue with pinpoint precision. The 11/4" long needle reaches where other glue applicators will never go. 63297 . . . . . . . . . . . . . . . . . . . . . . . $ 4.99

Stick Fast Quick-Set Glue Fast, strong bonds on wood, metal, glass and more. Choose from Thin (fast setting), Medium (general-purpose adhesive), Thick (for filling larger cracks) or Flexible (retains pliability). The Aerosol Activator speeds up the curing process and reduces potential foaming. The Debonder simplifies cleanup. 67673 Thin, 2.5 oz. . . . . . . . . . . $ 9.99 67681 Medium, 2.5 oz. . . . . . . . $ 9.99 67689 Thick, 2.5 oz. . . . . . . . . . . $ 9.99 67697 Flexible, 2.5 oz. . . . . . . . $ 12.99 30788 Thin, 4.5 oz. . . . . . . . . . $ 14.99 31281 Medium, 4.5 oz. . . . . . . $ 14.99 32660 Thick, 4.5 oz. . . . . . . . . . $ 14.99 53007 Aerosol Activator, 3 oz. . $ 5.99 67713 Aerosol Activator, 7 oz. $ 12.99 54118 Debonder, 2 oz. . . . . . . . . $ 7.99

Titebond® III Ultimate Wood Glue Waterproof wood glue is stronger, safer, easier to clean and less expensive than polyurethane glues. Allows eight minutes of open time and application temperature as low as 47º F. One hour clamp time! Cleans up with water. Does not foam. Use interior or exterior. 29332 4 oz. . . . . . . . . . . . . . . . . . . $ 4.99 28835 8 oz. . . . . . . . . . . . . . . . . . . $ 5.99 23921 Pint . . . . . . . . . . . . . . . . . . $ 7.99 28724 Quart . . . . . . . . . . . . . . . . $ 13.99 26875 Gallon . . . . . . . . . . . . . . . $ 32.99 Titebond® Extend Wood Glues Slower setting gives you time to complete complex assemblies. Allows 15 minutes of open time. 24623 Pint . . . . . . . . . . . . . . . . . . $ 8.99 38449 Gallon . . . . . . . . . . . . . . . $ 29.99

Titebond® II Extend – Water Resistant 24630 Pint . . . . . . . . . . . . . . . . . . $ 8.99 38465 Gallon . . . . . . . . . . . . . . . $ 31.99

Quick-Set CA Dry Box Glue Kit Includes 2.5 oz. bottles of Thin, Medium and Thick glue plus Activator, Change-A-Tip accessories, drying agent and "dry box" storage container, which keeps your glue safely sealed for extended shelf life. 34184 Dry Box Glue Kit . . . . . . $ 39.99 67727 Change-A-Tip Pack . . . . . $ 5.49

Rockler® Glue Bottle Applicator Kit All your gluing needs met in one versatile, easy-to-clean kit. Four applicators–Standard Glue Spout, Silicone Glue Brush, Glue Roller, and Mortising Spout–make it easy to put the glue where you want it. Glue Line Centering attachment keeps glue bead centered when edge gluing panels. Glue Funnel and Cleaning Brush cut down on the mess. Attachments also fit 16 and 32 oz Titebond bottles. 57361 8-pc. Kit. . . . . . . . . . . . . . .$ 19.99 Sold Separately: 59232 8 oz. Bottle/Glue Roller . . $ 8.99 49187 8 oz Bottle/Standard Spout $ 3.99 44346 16 oz Bottle/Standard Spout $ 3.99 46647 2-Pack/Standard Spouts . . $ 1.99

Rockler® 3-Pc. Silicone Glue Application Kit Our silicone kit sheds glue for quick, easy cleanup and excellent durability. Includes Silicone Glue Brush with flexible Silicone Tray and 4" Silicone Spreader. Brush (71/2" x 1" x 1/2") spreads glue evenly and features paddle applicator for box joints and other small spaces. Spreader is ideal for distributing glue over broad surfaces. Tray features notch to hold your brush so stray drops fall into pan. Patent pending. 43662 3-pc. Kit . . . . . . . . . . . . . $ 14.99 Sold Separately: Rockler® Silicone Glue Brush Glue peels off the silicone bristles. 45624 . . . . . . . . . . . . . . . . . . . $ 4.99 ea.

Rockler® Glue Paddles Thin paddles reach into tight spaces to spread glue on all surfaces. They have no bristles to shed, and hold just enough glue for a thin coating. Use for any detail gluing application. Four tip widths: 1/8", 1/4", 3/8" and 1/2"; plus two more 1/2" tips: one offset, and one angled. 48844 3-pc. Kit . . . . . . . . . . . . . . $ 5.99

Rockler® Silicone Project Mat Heat-resistant, easy-to-clean silicone—wet glue rinses off and dried glue peels off. Use in the home or shop. Textured surface on one side traps debris. Rolls up for easy storage but has no memory so it lies flat. 15" x 30" x 1/8" thick. 56209 . . . . . . . . . . . . . . . . . . . . . . $ 29.99

Non-stick Silicone products are easy to clean — even after glue dries! Most glues, including polyurethane peel right off.

Rockler® Mini Silicone Glue Brushes Get pinpoint precision and effortless cleanup with our Mini Silicone Glue Brushes! 3/8" angled brush tip is ideal for crafts and smaller detail work. Use the 1/8" dropper tip for minimal squeeze-out with dowel holes. 53/4" x 3/8". 45495 2-pc. Kit . . . . . . . . . . . $ 7.99 pk.

ONLINE VIDEO!

57361 Glue Bottle Applicator Kit

45624, Brush

48844 Glue Paddles

56209 Silicone Project Mat

45495Mini Silicone Glue Brushes

43662, Kit

77

Glue and Applicators

Rockler.com


01182018152101

T-Nuts Perfect for jobs requiring quick and simple disassembly. To install, drill a clearance hole for the threaded barrel; insert prong and hammer into place. It's that easy! Hanger bolt not included. 8 per pack. 26054 1/4"-20 . . . . . . . . . . . . . . . . $ 2.99 pk. 26062 5/16"-18 . . . . . . . . . . . . . . . $ 2.99 pk. 26070 3/8"-16 . . . . . . . . . . . . . . . . $ 3.49 pk.

Threaded Brass Inserts When projects call for superior quality, use threaded brass inserts. Guaranteed not to rust. 8 per pack. 33183 1/4"-20 . . . . . . . . . . . . . . . . . . . . . . . $ 6.99 pk. 33191 5/16"-18 . . . . . . . . . . . . . . . . . . . . . . $ 6.99 pk. 71589 3/8"-16 . . . . . . . . . . . . . . . . . . . . . . . $ 6.99 pk.

Threaded Inserts Easily installed with a screwdriver. 8 per pack. 33209 #8-32 . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99 pk. 28803 1/4-20 . . . . . . . . . . . . . . . . . . . . . . . . $ 7.99 pk. 28811 5/16"-18 . . . . . . . . . . . . . . . . . . . . . . $ 7.99 pk. 71571 3/8"-16 . . . . . . . . . . . . . . . . . . . . . . . $ 6.99 pk.

Hex Drive Threaded Inserts Large teeth give increased holding strength for a tighter grip. Ideal for end-grain applications. 8 per pack. 31872 1/4"-20 . . . . . . . . . . . . . . . . . . . . . . . $ 6.99 pk. 31880 5/16"-18 . . . . . . . . . . . . . . . . . . . . . . $ 6.99 pk.

Low-Profile Threaded Inserts These low-profile threaded inserts work especially well on thin materials such as exposed veneer seating. Thread depth is 3/16". Overall depth is 9/32". Use 1/2" mounting hole for hardwoods, 7/16" for softer material. 8 per pack. 39631 1/4"- 20 . . . . . . . . . . . . . . . . . . . . . . . . $ 4.49 pk.

24406 31872

26054

33209 33183

39631

PowInse For dslotteWork 30174 3018 46002

Many more Screws and Fastenersat rockler.com

Screw-On T-Nuts Screw-on flange assures positive resistance against rotation that far exceeds a standard T-nut. Ideal for use with glides. Easy to install. Internal threads listed. 11/4"

outside diameter. 8 per pack.

68379 5/16"-18 . . . . . $ 9.99 pk. . . . . .$ 8.99 10 + pks 68387 3/8"-16 . . . . . . $ 9.99 pk. . . . . .$ 8.99 10 + pks

Recex® Square-Phillips Combination Recess Screw This thread cutting screw is perfect for using in any wood. Special long sharp point is fluted to capture chips, allowing it to predrill itself. Self-countersinking nibs under the head. Recex prelube makes driving smoother and faster. 100 per pack. Pack 10+ Packs 42311 #8 x 1", Black . . . . . . . . . . . $ 4.99 . . . . . $ 4.49 42312 #8 x 1", Zinc . . . . . . . . . . . . $ 4.99 . . . . . $ 4.49 42313 #8 x 11/4", Black . . . . . . . . .$ 4.99 . . . . . $ 4.49 42315 #8 x 11/4", Zinc . . . . . . . . . . $ 5.99 . . . . . $ 5.39 42316 #8 x 11/2", Black . . . . . . . . .$ 6.99 . . . . . $ 6.29 42318 #8 x 11/2", Zinc . . . . . . . . . . $ 6.99 . . . . . $ 6.29 42319 #8 x 13/4", Black . . . . . . . . .$ 7.99 . . . . . $ 7.19 42320 #8 x 13/4", Zinc . . . . . . . . . . $ 6.99 . . . . . $ 6.29 42321 #8 x 2", Black . . . . . . . . . . . $ 8.99 . . . . . $ 8.09 42322 #8 x 2", Zinc . . . . . . . . . . . . $ 7.99 . . . . . $ 7.19 42323 #8 x 21/2", Black . . . . . . . .$ 10.99 . . . . . $ 9.89 42324 #8 x 21/2", Zinc . . . . . . . . . $ 10.99 . . . . . $ 9.89 42326 #8 x 3", Black . . . . . . . . . . $ 12.99 . . . . $ 11.69 42328 #8 x 3", Zinc . . . . . . . . . . . $ 12.99 . . . . $ 11.69

Combination head resists cam out

Coarse tapping screw predrills itself

Six cutting nibs will self-countersink

Saw-like threads drive without tearing

GRK R4 Multipurpose Star/Torx Screws Torx-head design eliminates cam-out slippage. Innovative self-countersinking nibs beneath the head and sharp, saw-like lower threads drive through a variety of materials smoothly, without tearing. Made of case-hardened steel for high tensile, torque and shear strength. 100 screws per pack. Size Pack 21082 #8 - 1" . . . . .$ 9.99 25703 #8 - 11/4" . . . .$ 9.99 20216 #8 - 11/2" . . . .$ 9.99 25357 #8 - 13/4" . . . .$ 9.99

Size Pack 24732 #9 - 2" . . . $ 13.99 27097 #9 - 21/2" . . $ 14.99 26271 #9 - 31/8" . . .$ 19.99

Square Square-X Size Drive Drive Pack 10 + Packs 6 x 5/8" . . . . . . . . . . . . 50168 . . . . . .$ 3.49 . . . . . $ 3.14 6 x 3/4" . . . . . . . . . . . . 52556 . . . . . .$ 3.99 . . . . . $ 3.59 6 x 1" . . . . . . . . . . . . . . 28605 . . . . . .$ 3.99 . . . . . $ 3.59 6 x 11/4" . . . . . . . . . . . . 28647 . . . . . .$ 4.49 . . . . . $ 4.04 6 x 11/2" . . . . . . . . . . . . 28654 . . . . . .$ 4.99 . . . . . $ 4.49 8 x 3/4" . . . . . . . . . . . . 28753 . . . . . .$ 3.99 . . . . . $ 3.59 8 x 1 . . . 30197 . . . . . . 28795 . . . . . .$ 4.49 . . . . . $ 4.04 8 x 11/4" . 30254 . . . . . . 29165 . . . . . .$ 4.99 . . . . . $ 4.49 8 x 11/2" . 30262 . . . . . . 29173 . . . . . .$ 4.99 . . . . . $ 4.49 8 x 13/4" . 30288 . . . . . . 29181 . . . . . .$ 5.99 . . . . . $ 5.39 8 x 2" . . . 30353 . . . . . . 29306 . . . . . .$ 5.99 . . . . . $ 5.39 8 x 21/2" . 30403 . . . . . . 29322 . . . . . .$ 7.99 . . . . . $ 7.19

Screws below are sold in packs of 50. 8 x 3" . . . 30445 . . . . . 29348 . . . . . .$ 6.99 . . . . . $ 6.29

Lube Finished Screws Completely dry to the touch, lube finish reduces friction for easier installation and protects the screws from surface rust. Rated at five hours of salt spray protection. 100 screws per pack unless noted.

Sharp point digs in with pinpoint accuracy

Screw resists pullout with threads that cut nearly perpendicular Slight but strong

body minimizes distortion of

material

Sharp thread angle cuts into wood to prevent splitting

Round Washer Recex Screws General woodworking screw is perfect for soft woods. Lube finish and type 17 self-drilling point for easier driving and less splitting, and a deep thread to prevent pull-through in softwoods. The maximum bearing surface helps resist pullout. Uses a #2 square drive bit. 100 per pack. Pack 10+ Packs 42191 #8 x 1" . . . . . . . . . $ 6.99 . . . . . . . . . . . . $ 6.29 42193 #8 x 11/4" . . . . . . . . $ 7.99 . . . . . . . . . . . . $ 7.19 42194 #8 x 11/2" . . . . . . . . $ 6.99 . . . . . . . . . . . . $ 6.29 42195 #8 x 13/4" . . . . . . . . $ 7.99 . . . . . . . . . . . . $ 7.19 42196 #8 x 2" . . . . . . . . . $ 9.99 . . . . . . . . . . . . $ 8.99 42198 #8 x 21/2" . . . . . . . $ 10.99 . . . . . . . . . . . . $ 9.89 42199 #8 x 3" . . . . . . . . $ 10.99 . . . . . . . . . . . . $ 9.89

Trim Head Square Drive Screws Maximum gripping power with a small head, perfect for keeping molding tight to a wall or ceiling or connecting cabinets together through the face frame. The low profile 3/16" head leaves a small footprint, making it easy to fill for an almost invisible install. Uses a #1 driver. Black finish. 100 per pack. . 61226 6 x 15/8" . . . . . . $ 6.99 pk. . . . . $ 6.29 10 + pks. 61234 6 x 21/4" . . . . . . $ 8.99 pk. . . . . $ 8.09 10 + pks.

Get the right screws and fasteners for the best woodworking results!If you don't see it here, we have many more at rockler.com, or call our knowledgeable staff at 800-279-4441

Scre Now damaby th 2079 2080 2080

Thre Neverthese identiWire lImper 57942 58475 53816 50751 51486 56301Threa

Hanger Bolts 8 per pack. 24406 1/4"-20 x11/2" $ 2.49 24463 1/4"-20 x 3" . .$ 3.49 24414 5/16"-18 x 2" $ 2.99

24448 3/8"-16 x 3" . .$ 3.99 24430 5/16"-18 x 3" $ 3.49

78

Screws and Fasteners

800-279-4441

078-079 8P SR.indd 78078-079 8P SR.indd 78 1/19/18 7:39 AM1/19/18 7:39 AM

01192018074046

Kreg® Coarse/Fine Pocket Hole Screws Perfect for pocket hole projects. Use fine thread in hardwoods, coarse thread in softwoods and particleboard. Easy drive zinc finish. #2 square drive. 38502 #7 x 11/4" Fine, 100-Pack . . . . . . . . . . . . . $ 4.49 62220 #7 x 11/4" Fine, 500-Pack . . . . . . . . . . . . $ 17.99 38515 #7 x 11/2" Fine, 100-Pack . . . . . . . . . . . . . $ 4.99 42841 #7 x 11/2" Fine, 500-Pack . . . . . . . . . . . . $ 19.99 35387 #8 x 1" Coarse, 100-Pack . . . . . . . . . . . . $ 4.49 42839 #8 x 1" Coarse, 500-Pack . . . . . . . . . . . $ 16.99 38528 #8 x 11/4" Coarse, 100-Pack . . . . . . . . . . . $ 4.49 30060 #8 x 11/4" Coarse, 500-Pack . . . . . . . . . . $ 18.99 38541 #8 x 11/2" Coarse, 100-Pack . . . . . . . . . . . $ 5.49 31558 #8 x 11/2" Coarse, 500-Pack . . . . . . . . . . $ 19.99 35922 #8 x 2" Coarse, 50-Pack . . . . . . . . . . . . . . $ 3.99 42840 #8 x 2" Coarse, 250-Pack . . . . . . . . . . . $ 13.99

Kreg® Stainless Steel Washer Head Screws 100% stainless steel makes these the ultimate exterior pocket hole screws. Resistant to corrosion, stainless steel screws hold garden and patio furniture together indefinitely and look great. They boast all the features of Kreg’s pocket hole screws. Self-tapping screw tips make for easy driving. Wide heads boast incredible holding power. Deep-seated #2 square drive heads eliminate “cam out,” ensuring a tight, solid joint. Use fine thread for hardwoods; coarse thread for soft woods and plywood. 39755 #7 x 11/4" Fine, 100-Pack . . . . . . . . . . . . $ 18.99 37015 #8 x 11/4" Coarse, 100-Pack . . . . . . . . . . $ 18.99 36661 #10 x 21/2" Coarse, 50-Pack . . . . . . . . . . $ 27.99

ghter

9 pk.9 pk.

erials /16".

or

9 pk.

Power Drive Threaded Insert Tools For driving threaded inserts with slotted heads accurately and quickly. Works with most variable speed drills. 30174 Power Drive 1/4"-20 . . . . . . . . . . . . . . .$ 11.99 30181 Power Drive 5/16"-18 . . . . . . . . . . . . . .$ 11.99 46002 Power Drive 3/8"-16 . . . . . . . . . . . . . . . $ 10.99

Packs$ 4.49 $ 4.49 $ 4.49 $ 5.39 $ 6.29 $ 6.29 $ 7.19 $ 6.29 $ 8.09 $ 7.19 $ 9.89 $ 9.89 11.69 11.69

rew

ur 1

Screw Extractors Now it's simple to remove broken screws without damaging the surrounding area. Repairing the hole left by the extractor is easy with a dowel. 20794 1/4" dia. . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99 20801 5/16" dia. . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99 20808 3/8" dia. . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99

Thread Detective® Thread Gauges Never be frustrated by confusing thread sizes again—these clearly marked solid steel gauges allow quick identification of size and thread pitch of nuts and bolts. Wire lanyards keep gauges together for easy storage. Imperial or metric. 57942 Mini, Imperial, 9 gauges, 1-64 to 5-40 58475 Mini, Metric, 12 gauges, M1.2x0.25 to M3.5x0.6 53816 Original, Imperial,14 gauges, 6-32 to 1/2-20 50751 Original, Metric, 11 gauges, M4x0.7 to M12x1.75 51486 Jumbo, Imperial, 6 gauges, 5/8-11 to 1-12 56301 Jumbo, Metric, 8 gauges, M14 x 1.5-M24 x 3.0 Thread Gauges, all sizes. . . . . . . . . . . . . . . $ 19.99 ea.

50751 51486 57942

Cabinet Hardware Installation

Flat Head Pozi Drive Euro Screws The only screw that works with the European 32mm system of cabinet components! 7.2 mm head diameter for 5 mm holes. Blum compatible. 100 per pack. Pack 10 + Packs 42345 #5 x 11.5 mm . . . $ 6.99 . . . . . . . . . . . . . . $ 6.29 42346 #5 x 13 mm . . . . . $ 6.99 . . . . . . . . . . . . . . $ 6.29

Drawer Front Adjustment Screws Perfect for aligning drawer fronts. Attach the drawer front to drawer, tighten enough to keep in place. Close drawer, align accordingly. Oversized 1/2" diameter head allows movement around 5/16" adjusting hole. Square-x heads. Zinc finish. 100 per pack. 34734 8 x 1" Zinc . . . . . . . . . . . . . . . . . . . . . . $ 6.99 pk. 38694 8 x 11/8" Zinc . . . . . . . . . . . . . . . . . . . . $ 7.99 pk. 34907 8 x 11/4" Zinc . . . . . . . . . . . . . . . . . . . . $ 8.99 pk.

Check out our Pocket Hole Clamp in the Joinery section of this

catalog or at rockler.com

Kreg® Blue-Kote Pocket Hole Screws Ideal choice for garden and patio furniture, as well as for general exterior construction. Three chemically-combined anti-corrosion layers give Kreg’s Blue-Kote screws up to 400% more weather resistance than zinc-plated screws. Self-tapping screw tips make for easy driving. Case hardened steel won’t bend or break, and the deep-seated #2 square drive heads eliminate “cam out,” ensuring a tight, solid joint. 35844 #8 x 11/4" Coarse, 100-Pack . . . . . . . . . . . $ 5.99 34594 #8 x 11/2" Coarse, 100-Pack . . . . . . . . . . . $ 6.99 38480 #8 x 2" Coarse, 50-Pack . . . . . . . . . . . . . . $ 4.99 42858 #8 x 2" Coarse, 250-Pack . . . . . . . . . . . $ 15.99 36503 #8 x 21/2" Coarse, 50-Pack . . . . . . . . . . . . $ 5.49 31908 #8 x 21/2" Coarse, 250-Pack . . . . . . . . . . $ 19.99

Kreg® Pan Head Fine Thread Pocket Hole Screws Ideal for use with hardwoods, these screws feature a #2 square-drive head with a flat bearing surface that prevents run-through. Self-tapping tips reduce splitting. 32679 #6 x 3/4", 100-Pack . . . . . . . . . . . . . . . . . . . . $ 3.99 42845 #6 x 3/4", 500-Pack . . . . . . . . . . . . . . . . $ 15.99 38124 #6 x 1", 100-Pack . . . . . . . . . . . . . . . . . . . $ 4.49 39829 #6 x 1", 500-Pack . . . . . . . . . . . . . . . . . . $ 15.99 42849 #6 x 11/4", 500-Pack . . . . . . . . . . . . . . . . $ 17.99 54343 #6 x 11/4", 100-Pack . . . . . . . . . . . . . . . . . $ 4.99 58270 #6 x 11/2", 100-Pack . . . . . . . . . . . . . . . . . $ 5.49 42850 #6 x 11/2", 500-Pack . . . . . . . . . . . . . . . . $ 19.99

Ch k t P k t H l Cl

Kreg® Blue-Kote Pocket-Hole Screw Kit Contains 450 of Kreg's most popular weather-resistant screws (in four sizes) and a durable easy-to-carry case. All feature deep #2

square drives and a needle-point self-tapping tip for

clean countersinks. Includes 100 each: 11/4", 11/2", 2", and 150 21/2" screws. 42833 . . . . . . $ 39.99

Kreg® 675-Piece Self-Tapping Pocket Hole Screw Kit Five types of screws! Case includes #6 x 1" pan-head fine (150), #7 x

11/4" washer-head fine (150), #7 x 1" panhead coarse (150), #8

x 21/2" washer-head coarse (75), and #8 x 11/4" washer-head coarse (150).

27231 . . . . . . . . . . . . . .$ 29.99

79

Screws and Fasteners

rockler.com


01192018074046

Step

SatinVinta

Bench Dog® Ultra Push-Bloc Feel confident, safe, and secure as you rip, rout, or joint stock on your most powerful tools. Non-slip grip outperforms every other push block on the market. 31/2" x 8". 42790 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99 ea.

Rockler® Double Featherboard Kit Apply pressure at table-level AND the top of your fence - ideal when routing workpieces on edge. Super stable, with unique expandable miter track bars. For use with table saws, router tables, drill presses or any tool with a standard miter slot. 21752 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99

Rockler® Retrofit Double Featherboard Kit Pairs with the Rockler table featherboard (#53677) for a double featherboard! Holds wood snug against fence for a safer, cleaner cut when ripping, routing and drilling. 23591 . . . . . . . . . $ 9.99

23591

21752

Bench Dog® Pocket Push Stick This pocket-sized push stick slips into your tool pouch or pocket so you can go from jointing, to sawing, to routing without ever having to search for a push stick. It's also a great portable model for the jobsite. Durable polymer material with over-molded rubber handle. 93/4" long. Blade is 5/8"W x 3/16" thick. 48305 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 5.99

ONLINE VIDEO!

Bench Dog® Feather-Loc Router Table Featherboards Featherboards can be used with the fence or on the router table and can be flipped for operations in either direction. The durable polymer retains its flex memory and will not mar your workpiece. Built-in setup feather makes setting the tension fast, easy, and repeatable. Slides quickly into 1/4" T-tracks. Sold as a pair. Optional Miter Slot Adapter allows you to secure Feather-Loc to any 3/8" x 3/4" miter slot. 27285 Featherboards (Pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.39 27603 Miter Slot Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.99

Lumber Wizard 4 Save expensive saw blades while protecting yourself from nails and screws hidden inside lumber! Unit detects the presence of metal with a laser light and audible alarm. 6" wide scanning area gives you faster scans and circuitry eliminates false alarms. Up to 40 hours of use on one 9-volt battery (not included). 11/8"H x 21/2"W x 18"L. 13 oz. One-year warranty. For smaller jobs, try the handheld Little Wizard II (#27869). 45767 Lumber Wizard 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 149.99 27869 Little Wizard II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 24.99

Bench Dog® 3-Pc. Safety Kit Kit includes a magnetic push stick with ergonomic handle for table saw and router table use, an angled push block for pushing your board on any flat surface, plus a featherboard that expands to fit standard 3/4" x 3/8" miter slots for maximum holding power. 48937 . . . . . . . . .$ 29.99

Fence Featherboard An absolute must for precision and safety, this tough polymer fence featherboard can be used in both infeed and outfeed applications. The featherboard mounts with the included heavy duty T-bolts and large, easy-to-grip threaded knobs. Fits all Rockler T-slot fences and can be used with material up to 11⁄8" thick. 53685 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 16.99

80

Shop Safety

800-279-4441

3

U

W ro

C

satosyo

VS

(S


01192018075847

Library Ladder — Satin BlackLibrary Ladder Starter Kit 50987 Satin Black. . . . . . . . . . .$ 499.99

Rolling Ladder Starter KitsBuilding a rolling ladder just got easier. Order one of the Starter Kits to get all the right hardware for an 8' ladder. Add wood, or order one of our pre-cut Wood Kits in oak, cherry or maple.

Library Kit includes(2) 6' Tracks(1) Track Union(6) Vertical Track Brackets(2) End Caps(2) Wheels(7) Step Rods* • Assembly Hardware *Steps not included

Utility Kit includes(2) 6' Tracks(1) Track Union(6) Vertical Track Brackets(2) End Caps(2) Rubber Feet(7) Steel Steps • Assembly Hardware

Build a fully custom rolling ladder using the options below

49545, 8' Classic Oak

Zinc Utility Step

Steps Build 8', 9' and 10' Ladders

Satin Black, Vintage Step

Track Length Options: 6', 12', 18', 24', 30'

Decorative Spindle for Satin Black, Classic and Vintage Ladders

Step Bracket Kits Add wood steps for 8', 9' and 10' ladders

Vertical or Horizontal Mounting Brackets

Flat Track Horseshoe Style Round Track Top Mount Style

Do you want custom rolling doors? Our NEW selection of hardware kits features

more styles at lower prices! – See Page 127

More Rolling Door Hardware at rockler.com/rollingdoor

9 ea.

use t. 29.99

rom s also ed

$ 5.99

LINEEO!

81

Rolling Ladder and Rolling Door Hardware

rockler.com

3 easy ways to order!

Use our online Ladder Design

Wizard Buying Assistant at rollingladder.rockler.com

Call our knowledgeable

sales staff at 800-279-4441 to review our ladder systems, obtain a quote or place an order

Visit one of our Retail Stores for assistance

(Store locations on page 130)


01192018075847

Whatever your project, Rockler’s Ergonomic Carbide Turning Tools are designed for you!

Carbide Mini Tool

Pen Turning Tool

Round Square Diamond Square Radius

Rotatable Carbide Cutters

Ergonomic molded-rubber grip Replaceable carbide cutter Flat-back stainless steel shank

Carbide Turning Tool Advantage (pre-sharpened)

Mini Ergonomic Carbide Turning Tools These tools are 131/2" long, perfect for small to medium-sized projects. Circle cutter diameter is 1/2". Square cutter is 3/8" square. Angle of diamond cutter is 35°. 48162 Round Turning Tool . . . . . . . . . . . . . . . $ 74.99 44622 Square Turning Tool . . . . . . . . . . . . . . . $ 74.99 47459 Diamond Turning Tool . . . . . . . . . . . . . $ 74.99 49804 Square Radius Turning Tool . . . . . . . . . $ 74.99 45142 3-Piece Boxed Set . . . . . . . . . . . . . . . . $ 199.99

Replacement Cutters — Full Size 44013 R2 Round Replacement Cutter . . . . . . $ 19.99 47536 S2 Square Replacement Cutter . . . . . . $ 24.99 47529 D2 Diamond Replacement Cutter . . . . $ 24.99 48770 Sr2 Square Radius Replacement Cutter $ 19.99

Full-Size Ergonomic Carbide Turning Tools Replaceable, rotatable cutter to eliminate hassle and downtime of sharpening. Use included wrench to rotate carbide for a fresh, sharp edge, and replace once all edges are dull. Ash handle encased in thick, molded rubber for enhanced grip and reduced fatigue. Great for beginning to advanced woodturners, ensuring quick success without the frustration of dull tools, and without the large investment of sharpening equipment. 191/2" long overall. Turning Tools 48723 Round Turning Tool . . . . . . . . . . . . . . $ 109.99 49318 Square Turning Tool . . . . . . . . . . . . . . $ 109.99 49632 Diamond Turning Tool . . . . . . . . . . . . $ 109.99 48535 Square Radius Turning Tool . . . . . . . . $ 109.99

Pen-Turning Ergonomic Carbide Tools At 91/2" long, these tools are perfect for turning pens and other small items. Set includes a high-speed steel 1/8" parting tool that can be resharpened, and two tools with replaceable carbide cutters: a 1/2" round cutter for general turning and a 1/2" square cutter with a 2" radius that produces a smooth finish cut. Torx driver included for cutter removal and repositioning. 47600 3-Piece Set . . . . . . . . . . . . . . . . . . . . . . $ 129.99

47907 R1 Round Replacement Cutter . . . . . . $ 24.99 42282 S1 Square Replacement Cutter . . . . . . $ 24.99

47661 D1 Diamond Replacement Cutter . . . $ 24.99 47377 Sr1 Square Radius Replacement Cutter $ 24.99

Replacement Cutters — Mini and Pen For both Carbide Mini Turning Tools and Carbide Pen Turning Tools.

Ergonomic Carbide Mini Tools3-Pc. Set

45142 47600

Parting Tool

Full-Size Tool

Ergonomic Carbide Turning ToolsWhether you're a beginner or an experienced turner, you'll get great results from these tools. The carbide cutter heads are sharp right out of the box, and when one dulls, simply rotate it to expose a new, sharp edge. When all edges are dull, just replace the cutter head. No sharpening required! Handles are solid ash encased at the end in thick, molded rubber for excellent ergonomics and a sure grip. Stainless steel shanks. Includes a hex key for securing cutter heads.

ONLINE VIDEO!

Buy these 3-Piece Sets and SAVE!Ergonomic Carbide Pen Tools3-Pc. Set

InteRoutUniquapplicto pre 52950 36676 32443

1

2

3

Scre 3" lonx 1/2 17972 . . . .

Sho

See our new Ergonomic Bowl Turning Tool on page 12

82 800-279-4441

Turning Tools


02012018124850

!

ens teel

wo nd r with x

ng. 29.99

24.99 24.99

Tools.

rting ool

nced

right y

hen ead. ash er

or

Interlock Signmaker's Router BitsUniquely designed and perfect for sign applications. They have a flatter bottom to prevent peaks in routed letters. 52950 3/16" . . . . . . . . . . . . . . . . $ 17.99 36676 3/8" . . . . . . . . . . . . . . . . . $ 19.99 32443 5/8" . . . . . . . . . . . . . . . . . $ 21.99 52950 3244336676

2 TemplateRoutingSystem

Kerning Spacer

Go to Signmaking.rockler.com and State Park Signmaking

Type your sign characters into our Wizard

The Wizard will generate a pdf file (example above) illustrating the sequence of templates used to incorporate kerning and the 2 template routing system

1

2

3 ONLINE VIDEO!

FREE online wizard shows how to use both template styles – visit signmaking.rockler.com for details

Interlock Signmaker's Templates—State Park Font Produce countless classic signs with our easily read "State Park" font system. These templates feature adjustable kerning (spacing)—for the most natural-looking layout of your text. Our system eliminates "split" letters. Includes 99 template pieces, a brass guide bushing and detailed instructions. Interlock Signmaker's Router Bits (sold separately) are uniquely designed and perfect for sign applications. 56091 11/2"H Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 49.99 52950 Interlock Signmaker's 3/16" Router Bit for 11⁄2" Characters . . . . . . . . .$ 17.99 57773 Rockler Signmaking Brass Bushing, 1/4" I.D. x 5/16" O.D. NEW! . . . . .$ 7.99 48356 21/4"H Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 49.99 36676 Interlock Signmaker's 3/8" Router Bit for 21/4"H Letters . . . . . . . . . . $ 19.99 43820 33/8"H Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 79.99 32443 Interlock Signmaker's 5/8" Router Bit for 33/8"H Letters . . . . . . . . . . .$ 21.99

33⁄8" Characters

21⁄4" Characters

11⁄2" Characters

Interlock Signmaker’s Templates —Comic Sans Create custom signs quickly and easily with your router in Comic Sans font. Templates interlock to form a stable pattern as you rout signs with appropriate router bits and bushings (3/8" for 21/4" kits and 5/8" for 4" kits). Secure patterns to your work surface with tape. Letters Kits include a total of 40 letters with duplicates of common letters and three spacers. Numbers and Symbols Kits include two each of 0-9 and 9 common symbols including @ and &. We recommend a plunge router that accepts 13/16" template guides. Bits and brass bushings sold separately. Interlock bits create a flat-bottomed cut. 30610 21/4" Letters Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 22.99 30599 21/4" Numbers and Symbols Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 22.99 36676 Interlock Signmaker 3/8" Router Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99 33967 3/8" Sign Bushing, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 7.99 31085 4" Letters Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 34.99 31093 4" Numbers and Symbols Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 34.99 32443 Interlock Signmaker 5/8" Router Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 21.99 30933 5/8" Sign Bushing, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 7.99

2-template system eliminates split letters and provides natural spacing for pro-quality results!

Screw-On Shaker Pegs 3" long pegs come with a #10 x 1/2" screw. 8 per pack. Oak. 17972 . . . . . . . . . . $ 11.99 pk. . . . . . . . . . . $ 10.79 10+ pks.


e 17

83rockler.com

SignmakingSee it in action online at rockler.com



Locking Bed Rail Brackets Set includes necessary brackets (8 parts) for one bed. Mounting plate: 13/16" x 41/2". Hook plate: 21/8" x 43/4". Screws not included. 53724 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 26.99 set

Heavy-Duty Bed Rail Fasteners These hard-to-find fasteners make a solid bed frame that easily knocks down. Mortise both pieces for an invisible joint. Sets include 4 two-piece, wrought steel fasteners. No screws included. 28589 4" x 5/8" . . . . . . . . . . . . . . . . . . . . $ 14.99 set 28597 6" x 5/8" . . . . . . . . . . . . . . . . . . . . $ 15.99 set

Bed Rail Fasteners Set includes four pairs of brackets. Screws not included. 38892 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.99 set

No-Mortise Bed Rail Brackets Top and bottom interlocking tabs and heavy corner gussets provide incredible rigidity. Captive M8 (5/16") connecting bolt will never get lost. 0.072 gauge zinc-plated cold-rolled steel. 13/8"W x 39/16"H. Includes 4 brackets (each a matched pair). Screws not included; #10 screws required for assembly. 46069 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 16.99 set

Replacement Bed Rail Hooks Set comes with four hook plates and 16 pins for holding them in place. Use two plates on each end to make a sturdy bed frame. For replacements, not for new construction. 38606 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 14.99 set

Bed Rail Fasteners Build a bed quickly and accurately with these surface mounted galvanized steel fasteners. Set includes four pairs of brackets. Screws not included. 30247 5" long . . . . . . . . . . . . . . . . . . . . . $ 16.99 set

Surface Mounted Keyhole Bed Rail Brackets 90º bracket with safety lock feature. Includes four bracket sets, enough for one bed. Screws not included. 32077 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99

Bed Rail Fasteners

Bed Rail Connection System Incorporates threaded rod, threaded inserts and unique slotted washers to produce a strong, secure, and non-visible metal-to-metal connections for beds. Includes connectors for 4 joints - enough for 1 bed. 37928 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99 set

Center Rail Fasteners Prevents sagging by attaching to a support rod along the middle of the bed. Set for 1 rail. Screws included. 10025 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 pr.

68429

Center Leg Prevents sagging by supporting the midsection of the bed. Hardware adjusts from 71/2" to 101/2". 68429 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 34.99 ea.

Steel Bed Rails Stable support for box springs. Bolt-on headboard brackets are double riveted for superior strength. Rails are 11/2" x 11/2". Overall length 76". Brown finish. Use for twin or full-size bed. 68486 11/2" x 11/2" rails . . . . . . . . . . . . . . . . $ 79.99 pr.

Bed Bolt Wrench Fits the bolt above. Tightens without rounding corners. 18615 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 18.99

Bed Bolt Strong steel bolts provide exceptional structural support for your bed frame. Bed bolt is 6"L overall, 3/8" dia. 99277 3/8" dia . . . . . . . . . . . . . . . . . . . . . . . . $ 7.99 ea.

Box Spring Fastener Mount these robust brackets to the inside of bed rails and end boards for a sturdy box spring platform. Use 2-3 per side and 1-2 per end. Screws not included. 38593 . . . . . . . . . . . . . . . . . . . $ 5.99

Queen-Size Adapter Conversion Plates Use a queen- size mattress with a full-size head and footboards. Great for use with antiques. Use with bolt-on frames. Set of 4. 41/8" H x 43/8" W. 32236 . . . . . . . . . . . . . . . . . . $ 14.99 set

68486

32236

Find more Bed Building and Repair solutions at rockler.com/bed-hardware

I-SemMur One qpet ba cabmatchcushilowerfold ofor bu263/4" 52000

DeluHardLegs whenrequito be bed cVerti 43707 4602 47002Horiz 46362 43932 4531

MurVerti896328962489616Horiz896088959189583

84

Bed Building and Repair

800-279-4441


02012018125121

9 set

d. 9 set

99 pr.

ers. 18.99

pport a. 9 ea.

I-Semble® Pet Murphy Bed Hardware One quick lift is all it takes to hide your pet bed. Folds neatly out of sight behind a cabinet enclosure that you build to match your decor. Sturdy, comfortable cushion included. Piston mechanism lowers bed quietly and gently. Metal legs fold out for support. Instructions included for building a basic enclosure measuring 263/4"W x 337/8"H x 14"D (closed). 52000 . . . . . . . . . . . . . . . . . . . . . $ 129.99

I-Semble® Platform Bed Lift Mechanisms Effortlessly lift your platform bed to reveal stored items, easily accessible and shielded from dust. Gas pistons provide lift for easy opening from the end of the bed and also dampen the closing. 53972 231-lb. Bed Lift . . . . . . . . $ 89.99 51526 210-lb. Bed Lift . . . . . . . . $ 84.99 54179 165-lb. Bed Lift . . . . . . . . $ 79.99

I-Semble® Platform Bed Frames with Wooden Slats Sturdy steel frames with comfortably cambered wooden slats. No box spring needed, so you get a full 12" of under-bed storage. Reverse camber of slats plus center leg minimize possibility of sagging. Complete assembly instructions included. 59872 Queen-Size . . . . . . . . . . $ 119.99 54787 Full-Size . . . . . . . . . . . . . $ 109.99 53548 Twin-Size . . . . . . . . . . . . . $ 79.99

53972

57656

I-Semble® Platform Bed Lift Mechanisms with Mattress Platforms and Wooden Slats ★ 57656 231-lb. Lift with Queen-Size Platform $ 199.99 ★ 52169 210-lb. Lift with Full-Size Platform . . . $ 179.99 ★ 59319 165-lb. Lift with Twin-Size Platform . . $ 159.99

Items with a star ★ are oversize packages, and special charges apply. Please ask for specific shipping charges when placing your order.

FREE Queen and Full Vertical Mount Deluxe Murphy Bed Plans online! Visit rockler.com/murphy-bed

Murphy Bed TechnologyDependable, counter-balanced hardware in every Murphy Bed Hardware Kit uses a smooth piston-lift system that gently opens and securely closes the bed. Options range from a basic twin bed size to a deluxe queen with legs that completely fold away. Each kit comes with step-by-step instructions for basic cabinet construction. Illustrated booklets include cut sheets, bills of materials and templates to help you get it done right, even with only basic woodworking skills and tools. The mechanism is backed by a 10-year guarantee. Our free online plan outlines everything you need to complete the project.

Deluxe Murphy Bed Hardware Kits Legs fold away completely out of sight when closed. Plywood enclosure is required for the mattress (not included) to be built during the construction of the bed cabinet. Vertical Mount 43707 Queen . . . . . . . . . . . . . . $ 299.99 46025 Full . . . . . . . . . . . . . . . . $ 299.99 47002 Twin . . . . . . . . . . . . . . . $ 299.99 Horizontal Mount 46362 Queen . . . . . . . . . . . . . . $ 299.99 43932 Full . . . . . . . . . . . . . . . . . $ 299.99 45315 Twin . . . . . . . . . . . . . . . $ 299.99

Murphy Bed Hardware Kits Vertical Mount 89632 Queen . . . . . . . . . . . . . . $249.9989624 Full . . . . . . . . . . . . . . . . . $249.9989616 Twin. . . . . . . . . . . . . . . . $249.99Horizontal Mount 89608 Queen . . . . . . . . . . . . . . $249.9989591 Full . . . . . . . . . . . . . . . . . $249.9989583 Twin. . . . . . . . . . . . . . . . $249.99

Vertical Mount Deluxe Murphy Bed, wood and fasteners not included

Vertical Mount Ideal for limited space. Height of the enclosure gives it the look of built-in furniture!

Horizontal Mount Works well in rooms where available floor or overhead space is limited.

Features fold-away legs

59872

ONLINE VIDEO!

85

Bed Building and Repair

rockler.com


01302018143803

Chain Support An ideal way to support and dress up a box or chest lid. Brass plated and polished. 73/4" long with 5/16" x 1" mounting plates. Screws and mounting plates included. 30663 . . . . . . . . . . . . . . . . . . . $ 15.99 ea.

Cedar Chest Hinge and Lid Supports Built to last from brass-plated steel. Mounts to side of case and under flat lid. 28217 . . . . . . . . . . . . . . . . . . . $ 27.99 pr.

31/4"

31/4"

2"

Soft Down Lid Support Lowers lids gently as a falling feather. Maximum opening angle: 105°. 87/8" long overall. Use one support per 43 inch/lbs. Use inch/lbs. formula above. 69732 . . . . . . . . . . . . . . . . . . . $ 27.99 ea.

Lift-O-Mat® Gas Springs For upward swinging doors and lids, these gas springs make opening easy. They work for frameless and face frame cabinets and open doors to 90º. Maximum door height 24", minimum door height 101/2". Includes two springs and four mounting brackets. Easy installation. Screws not included. Black. 32924 22.5 lbs . . . . . . . . . . . . . . $ 49.99 set 34373 33.7 lbs . . . . . . . . . . . . . . $ 49.99 set

Com Workovera 32110 32128

Overhead Bin Hinges Lifts and locks doors open at 75°. Dropdown doors stay securely upright until you raise the door slightly to release the lock. Surface mounted 1/2" overlay hinge. Pair 10 + Pair 66621 . . . . . . . . . . . . .$ 8.99 . . . . . $ 8.09

Lid-S Similaallowclose Finishto stoto 25combamoumany

Satin 44474 47545 43998 46252 46733 46591 44283

Rusti 48519 31891 34899 34353 37327 31396 36275

StopAdjusdrop fhelp kor rigpositiNickescrewminim 30741

Heavy-Duty Soft Down Lid Supports Each support offers 60-86 inch/pounds of support. Opens to 70º. Mounting requires 51/8" x 7/8" x 103/4". Measures 51/2" L x 15/8" H x 3/4" thick; arm is 10" L when fully extended. Use inch/lbs. formula above. 30280 Left-Hand . . . . . . . . . $ 25.99 ea. 30290 Right-Hand . . . . . . . . . $ 25.99 ea.

Inch/lbs. Formula = (Lid Weight x Front-to-Back Size) ÷ 2

Chest and Bin Lid Supports Continuous tension prevents accidental slamming. For boxes with 3/4” thick backs. Use inch/lbs. formula shown. Inch Back Left side Right sidelbs. mount mount mount35-40 . . . 26153 . . . . 26187 . . . . 26211 45-55 . . . 26161 . . . . 26195 . . . . 26229 95-125 . . 26179 . . . . 26203 . . . . 26237 Price: . . . . . . . . . . . . . . . . . . . $ 10.99 ea.

▲

deduct924924373924373373

Cedar Chest Surface Mounted Lock and Latch Button must be depressed for latch to close. Stamped steel, antique brass finish. Measures 23/8” x 2”. Requires 9/16” diameter boring. Keyed alike. 28233 . . . . . . . . . . . . . . . . . . . . . $ 29.99

Side View

7⁄8"

9⁄16"

Chest Half Mortise Heavy-Duty Lock This strong brass lock will keep your chest securely closed. Two hooks ensure extra protection against opening. Zinc-plated key. Requires a 13/8" L x 11/8" D x 5/16" mortise. Two keys provided. Keyed alike. . 14861 . . . . . . . . . . . . . . . . . . . . . . $ 79.99

Gas Spring Selection Guide

Door Wt. Door Ht. Product

5 - 7 lbs. 10"-24" 32924

8 - 10 lbs. 10"-18" 32924

8 - 10 lbs. 19"-24" 34373

11 - 13 lbs. 10"-12" 32924

11 - 13 lbs. 13"-18" 34373

14 - 20 lbs. 10"-12" 34373

86

Project Hardware

800-279-4441


01192018085121

up

" ting

9 ea.

r. "

. 9 ea.

Combo Supports Works as lid support or drop front. 93/4"L overall. Each arm is 47/8"L. Solid brass. 32110 Right . . . . . . . . . . . . . $ 39.99 ea. 32128 Left . . . . . . . . . . . . . . $ 39.99 ea.

Lid-Stay Torsion Hinges Similar to hinges on laptop computers, these cast-zinc hinges allow virtually any size lid to open smoothly, stay open and close easily - all with little effort and no additional hardware! Finishes will complement any project - from chests and boxes to storage units and more! Torsion mechanism is tested to 25,000 cycles. Fits 3/4” stock. Choose a symmetrical combination of hinges that provides approximately that amount of support. Use the formula shown to determine how many hinges you need. Patented. Satin Nickel: 44474 15 Inch-Pound . . . . . $ 34.99 ea. 47545 30 Inch-Pound . . . . $ 34.99 ea. 43998 40 Inch-Pound . . . . . $ 34.99 ea. 46252 60 Inch-Pound . . . . . $ 34.99 ea. 46733 30 Inch-Pound . . . . . $ 59.99 pr. 46591 40 Inch-Pound . . . . . $ 59.99 pr. 44283 60 Inch-Pound . . . . . $ 59.99 pr.

Rustic Bronze: 48519 15 Inch-Pound . . . . . $ 34.99 ea. 31891 30 Inch-Pound . . . . . $ 34.99 ea. 34899 40 Inch-Pound . . . . . $ 34.99 ea. 34353 60 Inch-Pound . . . . .$ 34.99 ea. 37327 30 Inch-Pound . . . . . $ 59.99 pr. 31396 40 Inch-Pound . . . . . $ 59.99 pr. 36275 60 Inch-Pound . . . . . $ 59.99 pr.

31⁄8"

21⁄16"

JIG IT® Lid-Stay Torsion Hinge Template Drill perfectly-spaced pilot holes in seconds. 23625 Lid-Stay JIG IT . . . . . . . . $ 11.99 68991 #6 Self-centering Bit . . . $ 12.99 Inch/lbs. Formula = (Lid Weight x Front-to-Back Size) ÷ 2

Basic Economy Drop Front Support This proven hardware lowers the drop front to a comfortable writing position, making it an excellent choice for slant or straight front secretaries. Simple elbow jointed arm is easy to install. Short arm is 5" and long arm is 6". Made of brass-plated steel. 31996 Left . . . . . . . . . . . . . . $ 11.99 ea. 37310 Right . . . . . . . . . . . . . $ 10.99 ea.

Adjustable Lid Support Control tension and opening angle with these versatile supports for lids or drop fronts up to 20 lbs. Mount horizontally or vertically on the left or right-hand side, with or without the support arm attached. The support arm can be removed! Lid or drop front requires separate hinges. 39419 . . . . . . . . . . . . . . . . . . . $ 24.99 ea.

Friction Lid Supports Straight Friction - Reversible lid support uses a durable nylon bearing to create friction for a controlled lid descent. Brass finished steel. Adaptable for left or right hand operation. 6" nominal length. Curved Friction - Use in cabinets where depth is limited. Works in boxes as shallow as 21/2". Brass finished steel. Screws included. 51/2" overall. 25635 Straight, right hand . . $ 6.99 ea. 25643 Straight, left hand . . . $ 6.99 ea. 25627 Curved, left hand . . . . $ 6.99 ea. 25619 Curved, right hand . . $ 6.99 ea.

Large Lid Support Great for many uses, such as large boxes and display cases. Special mounting plates allow for smooth movement. Measures 95/8” overall. 33601 . . . . . . . . . . . . . . . . . . . . $ 5.99 ea.

Reversible Lid Support Ideal for attache cases, luggage, display cases or game boxes. Brass plated steel. 5" center-to-center in the open position. 53/8" overall. 34090 . . . . . . . . . . . . . . . . . . . . $ 7.99 ea.

Trunk Lid Supports Designed for box style lids. Holds lid secure in open position. Plated steel. Measures 67/16" center to center and 67/8" long overall. 7/16" wide. Screws included. 23713 Brass . . . . . . . . . . . . . . $ 9.99 pr. 23739 Nickel . . . . . . . . . . . . . $ 11.99 pr.

Stopmatic Support with CatchAdjustable brake controls lowering of the drop front. Comes with magnetic catch to help keep door closed. Can be used in left or right hand installations by reversing position of foot and catch as needed. Nickel plated die-cast steel. Includes screws. Recommended for lids of 14" minimum height to 18" maximum height. 30741 . . . . . . . . . . . . . . . . . . . . . . $ 15.99

nds

ures 10"

9 ea.9 ea.

FREE PLANONLINE

87

Project Hardware

rockler.com


01302018145721

Clas Qualitused x 31/2

89921 74326 89913

SpriCoordopens 90168 74340

LockCatc Whensecurchoosfor itsfeatusuppl17/8"H 90051

Corn 13/8" per p 26419 26427 Bras 11/4" pack. 27508

haat

32284

29157

81258

29447

38197

3089726765

Butler Tray/Sewing Machine Hinges Solid brass with a steel spring hinge stops at a 90° angle. 11/2" wide x 21/2" long. 81258 Bright Brass . . . . . . . . $ 19.99 pr.

Twin Pin Hinges Solid extruded brass with a polished finish. Twin pin joints with steel pins and recessed knuckles allow for a perfectly flat surface. 30897 Narrow Twin . . . . . . $ 12.99 pr. 26765 Standard Twin . . . . . $ 18.99 pr.

Single Pin Hinges These simple yet elegant hinges are great for dropfront desks as well as sewing machine cabinets. 11/4"W x 31/8"L. 29157 Antique English . . . . . $ 9.99 pr. 32284 Solid Brass . . . . . . . . . $ 19.99 pr.

30mm Easy Mortise Hinge A good value and easy to install. Ideal for folding doors. Bronze finish. 38197 Bronze 115⁄16"L x 13⁄16"W $ 3.99 pr. 24912 30mm Forstner Bit . . . . . $ 21.99

Fully Adjustable Concealed Fall Flap Hinges Permits drop front to travel 90º to produce a flat surface flush with the cabinet bottom. Requires 35mm x 12mm deep holes. Plated steel. 29447 Nickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 15.99 pr.

10% OFF 10 Pair of the same Hinge

Sewing Machine Lift Mechanism Raises your sewing machine out of its cabinet to two additional working heights. Securely locks to create a steady working platform. Total height 191/4" with a travel distance of 143/4". Arm span is 121/2". Depth of the entire unit is 111/16". Rated for 30 to 35 lbs. 33100 . . . . . . . . . . . . . $ 179.99

29066

29082

29058

29074

Ice Box Handles Solid cast brass. For 3/8" offset doors. 29066 Left Hand Latch . . . . . . . $ 17.99 29058 Right Hand Latch . . . . . . $ 17.99

Solid Brass Ice Box Hardware 29074 Offset Overlay Hinge . . $ 22.99 29082 31/2" x 11/2" . . . . . . . . . . . . $ 9.99

Classic Icebox Hardware Kit Includes name plate, right and left handle latches, hinges, glides, shelf standards, bottle opener and supports. 98625 . . . . . . . . . . . . . . . . . . . . . $ 119.99

Solid Brass Bottle Opener Solid cast brass. Polished finish will acquire a beautiful patina over time. 21/2"W x 3"H x 11/8" projection. Includes brass screws. 46510 . . . . . . $ 9.99

Card Holders 2 per pack with pins. Brass plated. 27946 11/8" x 21/4" , Overall . . $ 6.99 pk. 27953 11/2" x 31/2" , Overall . . $ 6.99 pk.

Label Holders 2 per pack with pins. Brass plated. Card Size 28001 1/2" x 21/2" . . . . . . . . . $ 2.99 pk. 28019 3/4" x 21/2" . . . . . . . . . $ 2.99 pk. 28027 3/4" x 31/2" . . . . . . . . . $ 2.99 pk.

28019

28001

28027 27946

27953

70763

I-Semble Heavy-Duty Blind Shelf Supports Gain practical storage space and a clean, modern look. Supports are completely hidden from view, creating the illusion of a floating shelf. Securely screwed to wall studs for impressive strength. Shelves should be a minimum of 18" long to span two studs. One pair supports shelf up to 48" L and 125 lbs. For longer shelves add additional supports. Mounting screws included. 59434 . . . . . . . . . . . . . . . . . . .$ 19.99 pr.

Classic Icebox Plan Build your reproduction of a true American legend! Many contemporary uses (liquor, kitchen, linen cabinets, etc.) and a design perfect for almost any room. 33998 471⁄4"H x 431⁄2"W x 22"D $ 10.49

Solid Cast Brass Holder Authentically styled reproduction of British antique. Solid die-cast brass is polished to a high luster. Imported from England. Card size listed. 70763 17/8" x 1" with Pull . . $ 14.99 ea. 70755 .

. . . . . . . . . $$$$1919.19.99999999 prprpp ..

Free Butler Tray Template rockler.com/free-plans

Flat Card Holders Flat design is ideal when a separate pull will be used. 31/2"W x 11/2"H overall. Includes screws. Plated finish. Made in USA. 45672 Antique Brass . . . . . . . . . . $ 1.99 45681 Brass . . . . . . . . . . . . . . . . . $ 1.99 47608 Nickel . . . . . . . . . . . . . . . . . $ 1.99

Surface-Mounted Bottle Opener, Black Thick powder-coating provides excellent corrosion resistance. 25/8"W x 31/4"H x 13/16" projection. Includes matching screws. 54967 Black Powder-Coated Zinc . . . . . . . . .$ 9.99

45672

2 pairs in use

88 800-279-4441

Project Hardware


01192018085607

Classic Oblong Catches Quality catches with the traditional shape used on many trunks and chests. 115/16"W x 31/2"H. 2 per pack. 89921 Brass Plated . . . . . . . .$ 11.99 pk. 74326 Antique Brass Plated $ 11.99 pk. 89913 Nickel Plated . . . . . . .$ 12.99 pk.

Spring Trunk Locks Coordinate with matching corners. Hasp opens to 135°. 33/4"W x 413/16"H. 90168 Brass Plated . . . . . . . . . . $ 14.99 74340 Antique Brass Plated . . . $ 14.99

Locking Case Catches When added security is needed, choose this catch for its locking feature. Key supplied. 11/4"W x 17/8"H. 90051 Brass Plated . . . . . . . . $ 6.49 pr.

Vinyl Covered Handles Leather look-alikes at a fraction of the cost. Handles measure 61/8" x 25/8". Black has nickel finish and brown has brass finish. Screws not included. 25569 Black . . . . . . . . . . . . . . $ 5.99 ea. 25577 Brown . . . . . . . . . . . . . $ 5.99 ea.

Steamer Trunk Plan Retro-style trunk features camelback top, walnut “strap" design and brass hardware. Includes instructions and full-size patterns for curved pieces. Measures 36"W x 17"H x 20"D. 52304 . . . . . . . . . . . . . . . . . . . .$ 10.49

Steamer Trunk Hardware Kit Kit includes two lid stays, hinges, lock, corners, catch and handle. 94441 Brass Plated . . . . . . . . $ 81.99 74354 Antique Brass Plated $ 76.99

89921

Corners 13/8" x 13/8" x 13/8". Screws included. 4 per pack. Plated steel. 26419 Brass Plated . . . . . . . . $ 7.99 pk. 26427 Nickel Plated . . . . . . . $ 7.99 pk. Brass Plated Corners 11/4" x 11/4" x 1/2". Pins included. 4 per pack. Plated steel. 27508 Brass Plated . . . . . . . . $ 7.99 pk.

2750826427

Find more trunk and case hardware. Shop today at rockler.com

90° Stop Hinges Brass plated 90069 21/16" x 11/8", Brass . . . $ 5.49 pr. 90134 219/32" x 117/32" . . . . . . . $ 8.99 pr.Antique brass plated 74347 219/32" x 117/32" . . . . . . . $ 7.99 pr.Nickel plated 90077 21/16" x 11/8", Nickel . . $ 5.49 pr.

90241

Pinned Loops Use with handles 90209, 90192, 90184, and 90176. Loops come with a brad to secure handles. 20839 Nickel . . . . . . . . . . . . . . $ 6.99 pr. 90233 Brass Plated . . . . . . . . $ 6.99 pr. 74305 Antique Brass . . . . . . . $ 6.99 pr. Unpinned Loops Use with handles 48244 and 47087. 22188 Nickel Plated . . . . . . . $ 7.99 pr. 90241 Brass Plated . . . . . . . . $ 6.99 pr. 74312 Antique Brass . . . . . . . $ 6.99 pr.

20839

Leather Handles High quality, durable, attractive handles. All are 5/16" thick. Due to natural variations in genuine leather, color may vary from that shown. Color Length Each 90209 Tan/Light . . . . . 81/2" . . . $ 16.99 90192 Black . . . . . . . . 81/2" . . . $ 16.99 48244 Natural/Light . 10" . . . . $ 14.99 47087 Black . . . . . . . 10" . . . . $ 15.99 90184 Tan/Light . . . . . 11" . . . . $ 15.99 90176 Black . . . . . . . . 11" . . . . $ 17.99

90209 Tan/Light90192 Black,11⁄8" W x 81⁄2" nominal length

48244 Natural/Light47087 Black, 17⁄8" W x 10"

nominal length

90184 Tan/Light90176 Black, 11⁄4" W x 11" nominal length

90168

Chest Handle Medium gauge ornamental steel chest handle. Handle stops at 90° to the backplate. 21/4" boring. Brass plated. 25841 . . . . . . . . . . . . . . . . . . . . $ 6.99 ea.

Heavy-Duty Trunk Handles Solidly built to handle heavy loads. 5" wide x 311/16" high. 5/8" projection. Spring-loaded handle. Heavy-duty screws with T-nuts included. 58964 Chrome-Plated . . . $ 12.99 56111 Brass-Plated . . . . . $ 12.99

great ng

99 pr.99 pr.

58

9 pk.9 pk.

9 pk.9 pk.9 pk.

99999999 prprpp ..

89rockler.com

Project Hardware


01302018150021

Solid Brass Handle Economical and easy to affix, ideal for small boxes. 31/2"W x 7/8"H. 27742 . . . . . . . . . . . . . . . . . . . $ 11.99 ea.

49027 4631343960

45523 4949147405

Solid Brass Jewelry Box Hardware This sturdy, elegant hardware is the perfect touch for your next jewelry box. And the knobs can also be used as box feet! The necklace hangers are just the right length and shape for easy storage and retrieval. Sizes are diameters.

Knob/Feet 45523 Brass, 1/2" . . . . . . . . . . . . . $ 3.49 49491 Brass, 3/4" . . . . . . . . . . . . . $ 6.49 49027 Nickel, 1/2" . . . . . . . . . . . $ 5.99 46313 Nickel, 3/4" . . . . . . . . . . . . $ 8.99 Hangers 47405 Brass Hanger, 3/8" . . . . . . $ 4.99 43960 Nickel Hanger, 3/8" . . . . . $ 7.99

Solid Brass Necklace Hanger 11/8" overall length. 3/8" diameter. Tenon is 3/16" L x 3/16" dia. 93633 . . . . . . . . . . . . . . . . . . . . $ 5.99 ea.

Solid Brass Chain Carousel This carousel rotates for easy access to jewelry. Overall height 19/32". Requires minimum wood thickness of 1/4". Tenon diameter is 3/8". 13/8" diameter wheel. 40865 . . . . . . . . . $ 44.99

Solid Brass Lid Support Hinge Holds lid open at just over 90°, eliminating need for a lid support or chain. Mortising is easy with 35mm forstner bit—just clamp lid and box together and drill to appropriate depth. Includes brass screws. 49162 . . . . . . . . . . . . . . . . . . . $ 22.99 pr.

Solid Brass Cylinder Hinges Small, low-profile hinges are ideal for small projects like jewelry boxes. 15mm (9/16") long overall x 5mm (3/16") diameter. 10 per pack. 39578 Cylinder Hinges . . . . . $ 7.99 pk. 28533 5mm Bit . . . . . . . . . . . $ 4.99 ea.

Solid Brass Box Stop Hinges Working like a support these hinges can hold lids open beyond a vertical position, up to 95°. Listed width is for closed position. Screws included. Pair 62133 3/4"L x 1/2"W . . . . . . . . . $ 29.99 70391 11/4"L x 1/2"W . . . . . . . . . $ 31.99 62125 11/4"L x 5/8"W . . . . . . . . . $ 34.99 41781 2"L x 7/8"W . . . . . . . . . . $ 59.99

Solid Brass Box Feet Perfect finishing touch for a jewelry chest or small box project. Glue the mounting dowel into a 5/16" hole. 5/8"overall height. 1/2" dia. Set of four. 71795 . . . . . . . $ 14.99 set Sued

3471 73163 35880 7315 73080 34410 40270 73148

Jewe Thesetouchand pVelve 70602 70609 7059

73

34

MusDesigDesig 36698

Air-and Sprayflockisurfacquartfibersoz. ba 32222 2803

Wide assortment of Narrow Solid Brass Hinges at rockler.comoH


Solid Brass Extruded 90° Stop Hinge High-quality solid brass extruded stop hinges deliver strength and performance for all your box lid needs! Screws included. Pair 47028 11/2" x 11/8", Polished Brass $ 25.99 49773 11/2" x 11/8", Satin Nickel $ 31.99 49443 2" x 11/2", Polished Brass $ 37.99 46392 2" x 11/2", Satin Nickel . . $ 44.99

Solid Brass Knobs Elegant door and drawer pulls for small box projects. Polished finish. Screw is 5/16"L. Pair 27748 5/16" Dia. x 5/16" Proj. . . $ 4.49 27755 7/16" Dia. x 5/16" Proj. . . $ 5.99

Solid brass: the function of your custom box hinges on it

Solid brass accents make boxes elegant

35451 37663 36459

Polished Solid Brass Knobs Eye-catching beauty and quality shine through in the rich, golden luster of brass. A beautiful accent to wood furniture. 37663 1/2" Dia. x 1/2" Proj. . . . . . $ 2.99 35451 5/8" Dia. x 5/8" Proj. . . . . $ 2.99 36459 3/4" Dia. x 3/4" Proj. . . . . $ 3.49

Shop for many more Small Box Supplies at rockler.com

800-279-444190

Keepsake Box Supplies

800-279-4441


01192018090153

or mm

9 pk.9 ea.

32222

28035

22814

Suede-Tex Fibers 34711 Hunter Green . . . . . . . . . . . . . . . . . . . . . $ 13.99 73163 Kelly Green . . . . . . . . . . . . . . . . . . . . . . $ 13.99 35880 Navy Blue . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99 73155 Medium Blue . . . . . . . . . . . . . . . . . . . . . $ 13.99 73080 Cardinal . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99 34410 Wine . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99 40270 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99 73148 Brown . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99

Suede-Tex Adhesives 37688 Hunter Green . . . . . . . . . . . . . . . . . . . . . $ 13.99 73114 Kelly Green . . . . . . . . . . . . . . . . . . . . . . $ 13.99 33238 Navy Blue . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99 73122 Medium Blue . . . . . . . . . . . . . . . . . . . . . $ 13.99 73130 Cardinal . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99 36256 Wine . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99 40288 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99 73106 Brown . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.99

Deluxe Self-Adhesive Velvet High-quality velvet makes a luxurious box liner. Strong and durable adhesive. Sheets measure 12" x 24". 10471 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 10497 Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 10489 Green . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 34656 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 27123 Beige . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 26722 Rose . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99

10497

34656

1048910471

2672227123

Pressure Sensitive Felt Sheets Use this self-adhesive felt to protect wood, marble, tile, terrazzo, glass, etc. or protect one surface from another. Use as a decorative interior lining in keepsake boxes. Acrylic felt. 12" x 24". Pressure sensitive adhesive backing. 1/16" thick. 22822 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99 22814 Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99

Jewelry Box Insert Trays These velvet lined jewelry trays will add an elegant touch to any jewelry box. Trays have storage areas and padded ring bars. Colors match our Self-Adhesive Velvet. All trays measure 15" W x 12" Deep x 13/8" H. 70602 Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 49.99 70609 Green . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 49.99 70595 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 49.99

73148

73155

73080

35880

34410

34711

40270

73163

Buy a 72-note movement receive a FREE 2-design plan! (36698)

Music Box Two Plan Set Design A measures 33/4" H x 101/2" W x 61/2" deep. Design B measures 43/8" H x 101/2" W x 61/2" deep. 36698 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.39

72-Note

30-Note

18-Note

72-Note Musical Movements Enjoy full tonal richness. Movement plays 5 minutes or more when fully wound. 30032 Pachelbel's Canon in D (3 parts) . . . . $ 474.99 39496 Mozart's Eine Kleine Nachtmusik . . . $ 474.99

30-Note Musical Movement Tune plays for 30 seconds. Movement plays up to 8 minutes when fully wound. 32856 Waltz of the Flowers . . . . . . . . . . . . . $ 129.99

18-Note Musical Movements Tune plays for 13 to 20 seconds. Movement plays up to three minutes when fully wound. 34338 Blue Danube . . . . . . . . . . . . . . . . . . . . . $ 13.99 36223 Greensleeves . . . . . . . . . . . . . . . . . . . . . $ 13.99

Air-Assisted Flocking Gun and Suede-Tex Fibers Spray on a rich, velvety finish in just minutes! The flocking gun operates at 10-15 psi for use on vertical surfaces, corners and other tricky areas. Includes one-quart metal canister. Choose from eight Suede-Tex fibers and color-matched adhesives. Fibers come in 3 oz. bags. Each 8 oz. can of adhesive covers roughly 10-12 square feet. 32222 Air-Assisted Flocking Gun with Canister . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 72.99 28035 Hand-Operated Mini-Flocker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 6.99

Padded Ring Bars Can be cut to size! (24" L) Matches self-adhesive velvet. 32675 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99 32975 Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99 39840 Green . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99 35248 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.99

mall s

Pair$ 4.49 $ 5.99

e brass.

$ 2.99 $ 2.99 $ 3.49

36698 Plan

36698 Plan

rockler.com 91


rockler.com


01192018090154

JIG IT® Hinge Mortising System An accurate, efficient and versatile jig for routing a variety of hinge mortises—including challenging quadrant hinges! Take the stress out of the high-stakes final stage of box making. Requires the specific Mortise Template (sold separately) for your chosen hinge. Use your plunge router with a straight bit and guide bushing (sold separately) to rout the mortises. Detailed instructions are included. Mortises for lid and box are routed at the same time, assuring precise alignment. Transparent acrylic with laser etchings and low-friction for easy visibility, setup and routing. 58822 Hinge Mortising System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 49.99 90000 3/16" Straight Router Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 13.99 43877 3/8" O.D. Guide Bushing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 7.99 63107 Locking Nut for Guide Bushing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 4.99

JIG IT® Installation Solutions 54698 Q4 Template for 48068 and 21962 Small Quadrant Hinges . . . . . . .$ 8.99 51331 Q3 Template for 46807 and 24300 Large Quadrant Hinges . . . . . . .$ 8.99

JIG IT® Installation Solutions 56612 Q5 Template for 11040 Side Rail Hinge . . . . . . . . . . . . . . . . . . . . . . . .$ 8.99 50174 Q2 Template for 11027 Side Rail Hinge with Lid Stay . . . . . . . . . . . .$ 8.99 50079 Q1 Template for 11099 Premier Quadrant Hinge . . . . . . . . . . . . . . . .$ 8.99

11040

11027

Solid Brass Quadrant Hinges Integral stop arm holds lid open at 95°. Mounting hardware included. Requires an additional deep mortise for the support arm. 1/16" thick. Small Antique Brass 48068 11/4"L x 11/4"W, 3⁄16" . . . . . $ 9.99 Large Antique Brass 46807 15/8"L x 15/8"W, 9⁄32" . . . . . $ 9.99

Small Brass 21962 11/4"W x 11/4"H x 7⁄32" . . . . . . $ 7.99 Large Brass 24300 15/8"W x 15/8"H x 9⁄32" . . . . . . $ 9.99

Solid Brass Side Rail Hinges 11027 has integral lid supports and a 95° stop. 11040 has a 90° stop. Both are 1/8" thick. Non-tarnishing finish. Side Rail Hinge 11040 11/2" x 11/2" x 5/16" . . . . $ 44.99 Side Rail Hinge with Lid Support Arm 11027 2" x 2" x 5/16" . . . . . . . . $ 54.99

Brusso Solid Brass Quadrant Hinge Combines hinging action and lid support. Measures 1" x 1" x 11/4" overall. .08" thick. Requires an additional 11/4" deep mortise for the support arm. Use with a minimum of 3/8" thick stock. 11099 . . . . . . . . . . . . . . . . . . . . . . $ 49.99

Simplify the tricky process of routing precise mortises

JIG IT® Quadrant Hinge Mortise TemplatesChoose your quadrant hinges, then select the corresponding acrylic template to complete the mortises to fit your hinges. (See listings below)

Select the template to match your hinge

3/16" Straight Bit

3/8" Guide Bushing

Locking Nut

ONLINE VIDEO!


Mus Readywalnuand vSized 50104

Woo— simAppro

45663

44968

44912

49081

46194

45890

45628

45094

Mini 3/8" tis incl 30804 30811

92


800-279-4441



on for

49.99 13.99 $ 7.99 $ 4.99

.99

.99

.99

port. 8" eep h a

49.99

ng

t

s,

our ngs

Rockler Decorative Tandem Door Hinge Set Double up doors so you can hang items for neat, tangle-free storage. Ideal for small, narrow items such as necklaces in a jewelry box, darts in a dartboard cabinet, or small kitchen tools such as measuring spoons, peelers and cheese planes. Leaves 11/4" space between doors (assuming the recommended 1/2" door thickness). Includes catch plates with round magnets and mounting screws. 19/16" hinge barrel length. Zinc with polished brass finish. 55198 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 29.99

Musical Jewelry Box Kit Ready to assemble and finish with pre-cut unfinished walnut for the case, glass music movement cover, hardware and velvet jewelry compartment liner. 33/8" H x 95/8" W x 6" D. Sized for an 18-note movement. 50104 Walnut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 69.99

Decorative Swing Latches Thicker, rounded look adds style to your jewelry boxes, and is comfortable to the touch. Friction-fit catch stays put, whether closed or open. 11/8"W x 13/8"H. Includes screws. Plated finish. 44075 Antique Brass . . . . . . . $ 7.99 ea. 46818 Polished Brass . . . . . . . $ 7.99 ea.

Jewelry Box 105° Stop Hinges Finish your project with a hinge that is durable and distinctive. Sturdy 105° hinge comes with all mounting hardware. Leaf is 7.6mm wide x .9mm thick. Designed for stock 1/2" or thicker. Screws included.

59864 2", Antique Brass . . . . . . . $ 3.99 48633 2", Brass Plated . . . . . . . . $ 3.99 48870 2", Nickel Plated . . . . . . . $ 3.99 48106 2", Oil Rubbed Bronze . . $ 3.99 50663 8", Antique Brass . . . . . . . $ 4.99 49819 8", Brass Plated . . . . . . . . $ 4.99 45655 8", Nickel Plated . . . . . . . $ 4.99 48160 8", Oil Rubbed Bronze . . $ 4.99

Wooden Inlay Bandings Intricate solid wood patterns. Easy to apply — simply rout a groove, glue in place, sand lightly and seal. 36" lengths. Approximately 1/28" thick. Packs of 2. Width listed with stock number and image.

45663 1/8" $ 4.99 46432 1/8" $ 6.49 46295 1/8" $ 6.49 44319 1/8" $ 12.99

44968 3/16" $ 7.99 48922 3/16" $ 7.99 45127 3/16" $ 10.99 44146 3/16" $ 13.99

44912 1/4" $ 14.99 45264 1/4" $ 14.99 46142 1/4" $ 14.99 48697 1/4" $ 14.99

49081 1/4" $ 14.99 48956 1/4" $ 17.99 47223 1/4" $ 19.99 44530 1/4" $ 20.99

46194 5/16"$ 17.99 47285 5/16" $ 17.99 49009 5/16" . . . . . . . . . . . . . . . . . . $ 18.99

45890 3/8" $ 16.99 48070 3/8" $ 16.99 45695 3/8" $ 18.99 49481 3/8" $ 21.99

45628 1/2" $ 17.99 48644 1/2" . . . . . . . . . . . . . . . . . . $ 17.99 47242 1/2" $ 21.99

45094 3/16"$ 14.99 48466 3/16"$ 15.99 47262 3/16" . . . . . . . . . . . . . . . . . . . . $ 15.99

Mini Ball-Bearing Drawer Slides 3/8" thick. Requires a 1/4" mortise in the drawer side. Optional snap for positive close is included! 30804 71/4" to 111/4" Drawer Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 10.99 30811 97/8" to 151/8" Drawer Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 9.99

Mini Ball-Bearing Drawer Slides

VIDEOSEE THE VIDEO AND

GET A FREE PLANrockler.com/free-plans

93


rockler.com



Glider Bracket Hardware Turn virtually any bench into a glider! Measures 71/2" between centers with 11/4" offset. With rust-resistant plating and ball bearing pivot points. Mounts with common 1/4" dia. bolts (not included). Set of four. 58330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 31.99

Wonderlok 'Em Loose Joint Repair Eliminates loose and noisy joints found in most types of wood furniture. Specially formulated instant glue is super strong, fast acting and long lasting! Unlike many products that swell the wood, WonderLok ‘Em contains an adhesive that penetrates deep into loose joints and sets up in seconds. 28461 5 Grams . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.49 29051 20 Grams . . . . . . . . . . . . . . . . . . . . . . . . $ 11.99

Tin Nail Strip Recreate a classic look. Decorative nail strips to attach leather and fiber chair seats. Nail holes are located on every fifth head. Antique English finish. 6 foot strips with nails. 41319 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.99

Wrought Head Nails Ideal for antique restoration. Designed to look like the hand-forged nails of the late 1700s. 50 per pack. 32379 11/2" long . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.99 32366 1" long . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99 32353 5/8" long . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.99

Upholstery Nails Decorate couches and chairs! Antique brass finish. 7/16" diameter head x 1/2" long stem (5/8" overall length). Pack of 100. 46644 Plain . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 10.99 46590 Hammered . . . . . . . . . . . . . . . . . . . . . . . $ 10.99

Oak Chair Brace Replicates hip rests used on chairs for many years. Quality crafted braces add charm and extra strength. Made of smoothly sanded oak and pre-drilled for easy installation. 41517 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.99 pr.

51⁄2"

6"

Rocker Springs New life for your platform rocker! These durable standard size springs ensure years of rocking pleasure. Measures 31/2" x 51/8". 41210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 pr.

3237932366 32353

41319

46644 46590

Heavy-Duty Swivel Perfect for bar stools and small TV sets. Smooth rotation and holds its position well. 188 lb. center load rating. 63/4" square and 3/4" high. 41202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 20.99

Tilt Swivels 3° tilt makes sitting more comfortable. Use on chairs or stools with a back. Ball bearings for smooth movement. Standard Swivel has a 63/8" square top plate. Deluxe Swivel returns seat to original position when chair is not in use and has a 67/8" square top plate. 78147 Standard . . . . . . . . .$ 12.99 ea . . $ 11.69 10 + 17691 Deluxe . . . . . . . . . . .$ 31.99 ea . . $ 28.79 10 +

Extra Heavy-Duty Swivel Built with extra strength for swivel chairs, large televisions and heavy items. Center load rating is 1000 lbs. 10" square and 7/8" high. 28894 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 50.99

28894 41202 78147

“ I built some 18th century field chests. These nails look authentic (32353) and the black iron looks like real forged nails from a blacksmith. Everyone was quite impressed. Only Rockler offers anything like these and the price is right. I highly recommend.”

John Bortniak, Germantown, MD

Pivot Hinges Combines the pivoting feature of a roto hinge with the strength of a hex head bolt. An industrial coating offers rust resistance approaching stainless steel. Excellent for use in porch gliders, swings, gliding rockers and foot rests. 51243 . . . . . . . . . . . . . . $ 12.99 pr. . . . $ 11.69 10 + pr.

Adirondack Chair or Bench Templates with Plans Pre-cut full-size cardboard templates make building these projects as easy as trace, cut and assemble! We've added a modern touch to the classic Adirondack design, contoured the seats for comfort, and added support in key areas for even better durability. Plans include easy step-by-step instructions. Made in USA. 48773 Bench . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.99 49259 Chair . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.99

Adirondack Foot Stool and Side Table Plans Make your Adirondack seating even more comfortable. Complete plans include step-by-step instructions. Finished footstool is 24"W x 24"D x 15"H. Finished side table is 24"W x 20"D x 241/2"H. 52483 . . . . . . . . . . . . . . . . . . . NEW $ 4.99 ONLINE

VIDEO!Hosted by April Wilkerson Outdoor Oil

64980 Quart . . . . . . . . . . . . . . . . . .$ 19.99 64998 Gallon . . . . . . . . . . . . . . . . .$ 54.99

The Han OtheCanemakecane,rawhfurnitpagewell-by-stphoto 87587 25224

1/2" Replafurnitback uses appro 74116

Wid Greatfurnitfurnit 4118 8460 7409 7410

Cani Use w 4133 Cani Indisp 4142

Cani A flutwith 61/2" 42838

Cani Positiwhilefrom tool a 1528

Cani Savesneedl 41434

Chair and Bench plans include full-size templates

94

Chair Building and Repair

800-279-4441



pes ue is many ntains

and

$ 6.49 11.99

. th. easy

99 pr.

sure.

99 pr.

able.

ed

41160 - 1⁄8"

41152 - 7⁄64"

41145 - 5⁄64"

Unwoven Natural Cane Natural cane is unaffected by damp, humid conditions. Use on chairs or furniture with holes around the perimeter of the caned area. Each hank contains approximately 1,000 linear feet, enough to cane two to three chair seats. Binder is included with each hank. Space Hole Price per Between Holes Size Hank 41160 Medium . . . . . . . 3/4" . . . . . . . 1/4" . . . . $ 59.99 41152 Fine . . . . . . . . . . 5/8" . . . . . . . 3/16" . . . $ 49.99 41145 Extra-Fine . . . . 1/2" . . . . . . . 3/16" . . . $ 44.99

Woven Rattan Cane Minimum order is 12 lineal inchesRattan Cane is exceptionally durable, making it the best choice for heavy-duty uses like chair seats.

The Caner's Handbook/DVDs Otherwise known as The Caner's Bible, this book makes it easy to restore cane, splint, Danish cord, rawhide and wicker furniture. Includes 143 pages of precise and well-illustrated step-by-step directions and photographs. 87587 Softcover Book . . . . . . . . . . . . . . . . . . . . $ 18.95 25224 7-Step Caning DVD . . . . . . . . . . . . . . . . $ 25.19

1/2" Wide Flat Reed Replace seats for indoor furniture such as ladder back chairs. Average seat uses one coil, which is approximately 135 feet. 74116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 16.99

74095

41186

Wide Binding Cane Great for wrapping around legs, backs and sides of furniture, as well as for replacing the seats of rattan furniture. 41186 3/16" wide, 500' approx. length . . . . . $ 34.99 84608 3/16" wide 20' . . . . . . . . . . . . . . . . . . . . . $ 4.99 74095 1/4" wide, 500' approx. length . . . . . . $ 49.99 74102 1/4" wide 20' . . . . . . . . . . . . . . . . . . . . . . $ 4.99

Caning Pegs Use with unwoven cane while weaving. 10 pack. 41335 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99 pk. Caning Wedges Indispensable when installing woven cane. 10 pack. 41426 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 6.99 pk.

Reed Spline Use to fasten woven natural cane and paper cane into chair or panel grooves. Determine size you need by carefully measuring the width of the groove. 10 ft. lengths. Groove Groove Price Width Depth Each 41095 . . . . . . . . 3/16" . . . . . . . . 7/32" . . . . . . . $ 3.99 41103 . . . . . . . . . 1/4" . . . . . . . . . 1/4" . . . . . . . . $ 4.99 41111 . . . . . . . . 9/32" . . . . . . . . 7/32" . . . . . . . $ 5.99 41129 . . . . . . . . . 5/16" . . . . . . . . 5/16" . . . . . . . $ 6.99

Caning Awl A fluted hardwood handle equipped with a full length steel alloy blade. Measures 61/2" overall. Blade is 33/4" L. 42838 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99

Chair Webbing Made to last many years, the comfortable stretch of this 2" wide, rubber-coated woven strapping is excellent for chair backs and seats, providing support beneath cushions and upholstery. Allow 2" between straps. 40998 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3.99 ft. Metal Ends For Chair Webbing 41004 10 per pack. . . . . . . . . . . . . . . . . . . . . . . . $ 3.99

Install chair webbing with or without a groove in the seat frame

Fiber Seat Ideal for restoring and reproducing antique chairs. Extremely durable fiber and polymer blend that looks like leather when finished. Easy to stain or top coat. Seats come unfinished. 143/8" sq. Swirled Shield. Seat area is 113/8" x 111/4". 50900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 34.99

Conventional Weave Linear 50 ft. roll Inch per inch 41012 12" wide . . .$ .69 . . . . .$ .62 41020 14" wide . . .$ .69 . . . . .$ .62 41038 18" wide . . .$ .79 . . . . .$ .71 41046 24" wide . . .$ .99 . . . . .$ .89

Modern Open Weave Linear 50 ft. roll Inch per inch 41053 18" wide . . $ .89 . . . . $ .80 41061 24" wide . .$ 1.29 . . . $ 1.16

Modern Closed Weave Linear 50 ft. roll Inch per inch 41079 18" wide .$ .69 . . . . . .$ .62 41087 24" wide .$ .99 . . . . . .$ .89

Caning Tool Positions and tightens while saving fingers from stress! The pins on this tool also straighten the cane. 15281 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99

Fiber Rush Outlasts natural rush. The average chair seat requires approximately 400' of fiber rush. Diameter is 5/32". Brown (to resemble antique seats). 41228 Approx. 400 feet . . . . . . . . . . . . . . . . . . $ 17.99 15926 Approx. 800 feet . . . . . . . . . . . . . . . . . . $ 25.99

Pre-Twisted Seagrass Rush Similar in appearance and quality to traditional cattail rush, which is increasingly difficult to find. A varied mixture of tans and greens, which brown with age. Each coil measures approximately 350', or 2.2 lbs—enough to weave two average chair seats. 48401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Caning Needle Saves wear and tear on fingers. This 21" long steel needle is perfect for weaving unwoven cane. 41434 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99

41335

41426

41095 41103

41111 41129Shown actual size

es

95

Chair Building and Repair

rockler.com



Ball Wheel, Non Locking Ball Wheel, Locking

WooN

ComEqu Adjusswive17/8" threais 13/Set o 2431

36852 30628 31968 33648 35842 34532

37675 39815 32700 36874 35039

Skate Wheel, Locking Skate Wheel, Non-Locking

U-Bracket Twin Wheel Casters Now you can put casters on items made from 5/8" thick particleboard or any other material. 11/2" diameter twin wheel casters are easy to install. Load rating is 40 lb. each. 31007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99 pr.

Translucent Skate Wheel Casters ✱ Authentic inline skate wheels roll furniture and more with speed, smoothness and style! 110 lb. load rating. 360º swivel. 2.5" wheels. Priced each.

Non-Locking 9.99 33648 . . . . . . . . Dark Blue 35842 . . . . . . . Neon Blue 34532 . . . . . Neon Green 31108 . . . . . . Clear White 34102 . . . . . . . . . . . . Gray 34556 . . . . . . . . . . . . Blue

Locking $ 10.99 39692 . . . . . . . . Dark Blue 38773 . . . . . . . . Neon Blue 31618 . . . . . . Neon Green 36852 . . . . . . Clear White 30628 . . . . . . . . . . . . Gray 31968 . . . . . . . . . . . . . Blue

Ball Wheel Casters ✱ Not exactly your grandmother's casters. Eye-catching 2" spherical wheels roll smoothly over a wide range of surfaces. 88 lb. load rating. 360º swivel. Priced each. Locking $ 9.99 32047 . . . . . . . . . . Yellow 31134 . . . . . . . . . . . . Gray 37204 . . . . . . . . . . . . Black 37675 . . . . . . . . . . . . Blue 39815 . . . . . . . . . . . . . Teal

Non-Locking $ 8.99 32700 . . . . . . . . . . . Yellow 36874 . . . . . . . . . . . . Gray 35039 . . . . . . . . . . . . Black 37173 . . . . . . . . . . . . . Blue 35475 . . . . . . . . . . . . . Teal

✱These items require 1-2 weeks for delivery.

Heavy-Duty Polyurethane Casters These high-quality casters feature slightly soft, resilient tires and solid steel bodies for a remarkable combination of smooth performance and incredible strength. Great for furniture, shop stands and more. Durable nylon. Large (over 2" dia.) casters have a 250 lb. load rating. Small (19/16" dia.) casters have a 110 lb. rating per unit.

34387 2414124125

Soft Twin Wheel Casters, Non-Locking Protect your hardwood and ceramic floors from scuff marks with gentle urethane wheels. 90 lbs load rating. 24141 Plate Mounted, 2" Dia. . . . . . . . . .$ 24.99 /four 24125 Stem Type, 2" Dia. . . . . . . . . . . . . $ 25.99 /four

Plate Mounted 34387 Locking, 215/16" Dia. . . . . . . . . . . . . . . $ 8.99 ea. 40262 Locking, 19/16" Dia. . . . . . . . . . . . . $ 12.99 /four 40197 Non-Locking, 19/16" Dia. . . . . . . . . . $ 9.99 /four

Desi 3” difriendswive 37882 30705 33775 35377✱The

Plate or Socket Mount Ball Casters These easy-rolling casters are good for wood, tile or linoleum floors. The 19/16" hard rubber ball casters have ball-bearing raceways and are covered by an attractive polished brass hood. 21/8" high. Load rating is 300 lbs. per set. Sold 4 per set. 31028 Plate Mount . . . . . . . . . . . . . . . . . . . $ 11.99 pk. 31259 Stem Mount . . . . . . . . . . . . . . . . . . . $ 11.99 pk.

Porcelain Casters Non-marking porcelain wheels are good for all types of floors. 11/8" dia. x 1/2" wide. 24513 . . . . . . . . . . . $ 11.99 ea.

Hardwood Casters Ideal for older restorations or reproductions where a rubber or plastic caster would look out of place. Durable 11/4" dia. hardwood wheels. Stem mount design allows casters to swivel. Includes sleeves. 43616 Pack of 4 . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99

Corner Caster Support heavy furniture while providing superior stability with brackets that easily secure to the corners of a frame. Black phenolic thermoset plastic wheels. Weight capacity 290 lb. per set. 4 casters per set. 30910 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 16.99 set

SlipStick Rubber Casters 2" wheels feature a soft, specially formulated rubber tire that reduces noise when rolling on hard surfaces. 7/16" dia. universal stems. Use them to replace old casters on your favorite chair (sockets not included). Sold in sets of five for the new "no-tip" office chairs. 5-year replacement warranty. Weight load limit: up to 330 lbs. 48115 5-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 20.99

Self- Brown 26401 26385

3" Diameter Casters Load rating per caster: 240 lb. 4" overall height. Stem casters have 1" long stems with 1/2"-13 threads. Pair 35340 Rigid, Plate Mount $ 19.99 33868 Swivel, Plate Mount $ 24.99 25985 Lock Swivel, Stem . .$ 29.99 38865 Lock Swivel, Plate . . $ 29.99

4" Diameter Casters Load rating per caster: 265 lb. 5" overall height. Pair 23802 Rigid, Plate Mount . $ 19.99 22410 Swivel, Plate Mount $ 24.99 23030 Lock Swivel, Plate . . $ 29.99

5" Diameter Casters Load rating per caster: 285 lb. 6" overall height. Pair 39507 Swivel, Plate Mount $ 24.99 37138 Lock Swivel, Plate . . $ 29.99

Heavy-Duty Polyurethane Casters Featuring slightly soft, fully resilient wheels and solid steel bodies, All prices are per two casters.

35340 25985 23802 23030 39507 37138

Self-Felt 3/64"packa 26351 26336 26310

Scre Soft, d1/2"H1" sc 58411 54885

Swiv PerfecWhitediamethreasepar 88741 28803

96

Casters, Glides and Levelers

800-279-4441


01192018091110

Designer Wooden Casters

Non-Locking

Colored Profile

Casters, Non-Locking

Combination Leg Equalizers Adjusts vertically and swivels for uneven floors. 17/8" long bolt with 3/8"-16 threading. Base diameter is 13/4". Zinc-plated steel. Set of 4. 24315 . . . .$ 19.99 pk.

Tap-in Glides Keep your wooden chairs from marring the floors. 16-Pack. 88931 7/8" Dia. White . . . . $ 6.99 88569 7/8" Dia. Brown . . . . $ 6.99 88577 1" Dia. Brown . . . . . $ 9.99 88949 1" Dia. White . . . . . . $ 9.99

Adjustable Leveler Legs These leveler legs adjust up to 19/16" to give you a range from 37/16" to 5". Toe kicks are removable, giving you easy access to plumbing and electrical fixtures! Load rated at 400 lbs. per leg. Includes four plinth clips for attaching up to two toe kicks. Black. Set of four. 32183 . . . . . $ 17.99 pk.

Heavy-Duty Lifting Levelers Lipped mounting bracket works to lift and creates greater stability. Each leveler has load-bearing capacity of 600 pounds. Adjust to within 21/4". Minimum installation height is 3". Requires 5mm hex wrench to adjust. Set of 4. 81239 Lifting Levelers . . . . . . . . . . . . . . . . . . . . . . . . . . $ 25.99 pk. 81253 5mm Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 1.99 ea.

36308 39850 301273510437882

35377 31544 34779 3684133331

Colored ProfileCasters, Locking

Designer Wooden Casters Locking

" meter is 40

9 pr.

Colored Profile Casters Smooth performance, sensational style! These 3" flat-wheeled casters are perfect for shop stands, furniture, and more. 360º swivel, 110 lb. load rating per caster. Priced individually.

Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99 33331 . . . . . . . . . . . . Gray 31544 . . . . . . . . . . . Amber 34779 . . . . . . . . . . . . . Red 36841 . . . . . . . . . . . . Aqua

37000 . . . . . . . . . . . . Clear 35050 . . . . . . Apple Green 34720 . . . . . . Ocean Blue 34574 . . . . . . . . . . . Yellow

Non-Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.99 35104 . . . . . . . . . . . . Clear 36308 . . . . . . Apple Green 39850 . . . . . . . Ocean Blue 30127 . . . . . . . . . . . Yellow

35468 . . . . . . . . . . . . Gray 31205 . . . . . . . . . . . Amber 37766 . . . . . . . . . . . . . Red 37403 . . . . . . . . . . . . Aqua

Designer Wooden Casters ✱ 3” diameter casters with natural wood wheels and floor-friendly PVC tread rings. Great for wood furniture. 360º swivel, 110 lb. load rating per caster. Priced individually. 37882 Non-Locking, Maple . . . . . . . . . . . . . . . $ 14.99 30705 Locking, Maple . . . . . . . . . . . . . . . . . . . $ 15.99 33775 Non-Locking, Beech . . . . . . . . . . . . . . . . $ 14.99 35377 Locking, Beech . . . . . . . . . . . . . . . . . . . . $ 19.99 ✱These items require 1-2 weeks for delivery.

9 pk.9 pk.

a Weight

9 set

88577

88931

Nylon Glides Long lasting tap-in glides protect floors from scratches and indentations while they protect wooden furniture legs from spills and moisture. Self-lubricating slide easily on any surface. Sets of 4. 24216 1/2" . . . $ 2.99 set 24224 5/8" . . . $ 2.99 set

24240

24232 3/4" . . . $ 2.99 set 24240 7/8" . . . $ 3.49 set

ers in

ear 0 lbs.

20.99

Self-Adhesive Felt Tape Brown, 1/16" thick. Ft. 10-89 ft. 90 + ft. 26401 3/4" Wide . . . . . . $ .99 . . . . . $ .89 . . . . . . .$ .80 26385 1/2" Wide . . . . . . $ .99 . . . . . $ .89 . . . . . . .$ .80

26401

26351

Self-Adhesive Felt Dots 3/64" thick. 40 per package. 26351 3/4" . .$ 4.49 pk. 26336 1/2" . .$ 3.99 pk. 26310 1/4" . .$ 3.49 pk.

Slipstick® Glides Protect all your floors, but when you're ready to move, these discs make it easy. The specially formulated disc resists sliding until furniture is tilted, allowing you to Tilt n Slide® without damaging the floor. Stick or screw them to furniture legs. Includes mounting screws and a quick-stick pad on each disc. 26438 3/4", Black, 16-Pack . . . . . . . . . . . . . . . .$ 9.99 26594 1", Caramel, 8-Pack . . . . . . . . . . . . . . . .$ 8.99 49275 1", Chocolate, 8-Pack . . . . .$ 8.99 22829 11/4", Caramel, 8-Pack . . . . . . . . . . . . . . .$ 8.99 44219 11/4", Chocolate, 8-Pack . . . . . . . . . . . . .$ 8.99

26594 4421926438

Screw-On Case Feet Soft, durable rubber. 3/4" Dia. x 1/2"H. 4 feet per pack. Includes 1" screws. 58411 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.99 54885 Gray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.99

Swivel Levelers Perfect for angled legs. White nylon base. 11/4” diameter. Use with 1/4”-20 threaded inserts (28803, sold separately). Nickel plated. 88741 Swivel Levelers , 4-Pack . . . . . . . . . . . $ 5.99 pk. 28803 Threaded Inserts , 8-Pack . . . . . . . . . . $ 7.99 pk.

Self-Leveling Glides The only glide on the market that automatically adjusts for angled or uneven legs! Allows chairs to glide smoothly and conforms to level the difference between furniture legs and the floor. Easy, screw-in installation. 1" diameter x 5/8" high. 30847 4-Pack . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.99 pk.

97

Casters, Glides and Levelers

rockler.com


01192018091111

Meta Adds Use twsuppo 30006

Tabl Securallowunderslot o 34215

Drop For tacorrecdistanthen matchlengt 29520 29538 29546 29652

CardTablBrac Solidlfor duBracklock copen and afold uwith right 63198

Power Venting Fan Kit Easy to install and prewired 110/120V. Fan is 119mm (411/16") dia. x 1" thick, finger guard 1/8", media filter 1/4". Air movement is 64/80 cubic feet per minute (CFM). 38379 . . . . . . . . . . . . . . . . . . . . . . $ 39.99

32057

Desk Storage Drawers Stay organized with versatile trays featuring ball-bearing slides. 68264 191/4" L x 22" W x 2" H . . . . . . . . . . . . . $ 44.99

Speaker Panel Connectors Just snap the front panel into place for a secure fit. 4 per pack. 12500 . . . . . . . . . . . . . . . . . . . . $ 4.99 pk.

Speaker Cloth Get clear, unruffled sound (95% to 100% sound transcendence) from the speaker. Polyester. 17899 Black 36" x 68" . . . . . . . $ 39.99 17906 Sand 36" x 58" . . . . . . . . $ 39.99

17906 Sand17899 Black

Dually Plastic Grommets For a grommet that looks good on both sides, turn to the Dually. Simply trim to length and press together. Works with material from 3/4" to 21/2" thick. Use with 21/2" hole saw. 45090 Almond . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3.49 48028 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3.49 49136 White . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3.49

Metal Grommet Die cast steel with an attractive finish. 13/4" in diameter at the top with a 3/4" notch. Requires a 19/16" diameter hole. 30312 Antique Brass . . . . . . . . . . $ 4.99 30320 Bright Brass . . . . . . . . . . . . $ 4.99 91299 Chrome . . . . . . . . . . . . . . . $ 4.99 42740 Matte Nickel . . . . . . . . . . . $ 4.99 42741 Matte Black . . . . . . . . . . . $ 4.99

Antique Brass

Bright Brass Chrome Matte Nickel Matte Black

More grommets and office

products at rockler.com

Wooden Vent Covers 21/4" x 10" opening (overall size, including overlap, is 33/4" x 113/16" x 3/4"). Unfinished. 38317 Red Oak . . . . . . . . . . . . . $ 31.99 38327 Maple . . . . . . . . . . . . . . . $ 31.99 38309 Cherry . . . . . . . . . . . . . . . $ 31.99

Lipped Vent Grommets Easy-to-install grommets are made of molded plastic. 32064 25/8 x 101/8" . . . . . . . . . . . . .$ 6.99 32071 33/4 x 121/8" . . . . . . . . . . . . .$ 8.99 32057 15/8 x 67/8" . . . . . . . . . . . . . .$ 4.49

Standard Plastic Grommets Keep your cables neatly arranged and protected from sharp edges. Size listed indicates the required hole size, not the overall diameter. Each 10+ 50+Prices (all colors/sizes). . . $ 3.99 . . . . $ 3.59 . . . . $ 3.23

White Grommets 53886 . . . . . 11/2" 57464 . . . . . 13/4" 57269 . . . . . . . 2" 53806 . . . . . 21/2"

Brown Grommets 57696 . . . . . . . 1" 57855 . . . . . 11/2" 51100 . . . . . 21/2" 51109 . . . . . . . 3"

Black Grommets 50241 . . . . . . . 1" 53445 . . . . . 11/8" 57058 . . . . 11/2" 50125 . . . . . 13/4" 55092 . . . . . . . 2" 50031 . . . . . 21/2" 54268 . . . . . . . 3"

Gray Grommets 55998 . . . . . 13/4" 59644 . . . . . . . 2" 55182 . . . . . 21/2"

11⁄8"–53445 11⁄2"–5788513⁄4"–59464

21⁄2"–53806

3"–51109

1"–50241

2"–59644

Heavy-Duty Lazy Susan Solidly built aluminum swivel provides stable support for large stationary platforms. Great for use as a tabletop Lazy Susan, but works for much larger applications as well. Ball bearings ensures smooth, quiet movement. 12451 171/2" dia. . . . . . . . . . . . . $ 79.99 56875 235/8" dia. . . . . . . . . . . . $ 199.99

Ideal for TVs too large to pull out.

Slimline Lazy Susan Here's the lowest profile lazy susan available — it's only 1/16" thick and boasts a 220 lb. load rating! Black plastic with metal rollers. 78683 125/8" (320 mm) dia. . . . $ 13.99

Low Profile Lazy Susan Hundreds of applications! Precision ball-bearing system delivers years of quiet operation and extremely smooth rotation at the touch of a finger. Recessing drops this 5/16" thick hardware to a barely visible 1/8" profile. Rust-resistant zinc plating. 28951 3" square, Rated 200 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 2.99 28969 4" square, Rated 300 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 3.99 28977 6" square, Rated 500 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 4.99 18531 9" round, Rated 750 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 6.99 28985 12" round, Rated 1000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 9.99

98

Media, Office and Furniture Hardware

800-279-4441

Drop SurfaSteel Appli 29249Appli 29256

A



Metal Drop Leaf Supports Adds strength and stability to your table. Use two per leaf. For smaller leaves, one support is acceptable. 143/4" long. Metal. 30006 . . . . . . . . . . . . . . . . . . . $ 12.99 pr.

Desk Top Fasteners, 8-Pack Two countersunk holes in opposing directions. Holes 5/8" on center. 13/16" x 11/16". Heavy-duty 7/64" thick steel. Includes 5/8"-#6 FH screws. 21650 . . . . . . . . . . . . . . . . . . . . $ 5.49 pk.

Table Top Fasteners Secure table tops to aprons and still allow for expansion. Fasteners screw to underside of table and slip into a 3/32" slot on the apron. 8 per pack. Steel. 34215 . . . . . . . . . . . . . . . . . . . . $ 2.99 pk.

Align-N-Lock Performs both functions simultaneously. Great for leaves and table halves. Yellow zinc-plated. 23/8" x 25/16". 21585 . . . . . . . . . . . . . . . . . . . . $ 4.49 ea.

Brass-Plated Table Lock Perfect for locking leaves and table halves. Base plate measures 21/4" x 29/16" when installed. 15/16" height. . 31674 . . . . . . . . . . . . . . . . . . . . $ 6.99 ea.

Solid Brass Table Keeper Holds heavier table leaves together. 31/2"W x 17/8"D. 35139 . . . . . . . . . . . . . . . . . . . $ 14.99 ea.

Solid Brass Table Lock Secures leaves and adjoining table halves to prevent gaps. 2" diameter. 69047 . . . . . . . . . . . . . . . . . . . $ 19.99 ea.

20" slides for 26" maximum opening. 29470 Wood, 2" H . . . . . . . . $ 29.99 set 29678 Steel, 2" H . . . . . . . . . $ 79.99 set20" slides for 50" maximum opening. 29488 Wood 23/8" H . . . . . . . $ 49.99 set 29686 Steel 2" H . . . . . . . . . $ 124.99 set

Single split base WoodMetal

Trestle Table Slides Increase your seating area! Slides extend from 26" (closed position) to 40" (open position). Set includes four slides, two for each end. 29660 . . . . . . . . . . . . . . . . . . . $ 79.99 set

Four-legged split base

Corner Brackets for Table Aprons Reinforce rail connections with these solid steel brackets. Each style comes in sets of 4, and can be assembled easily without glue or clamping. Hanger bolts and wing nuts not included. 24279 Surface, 23/8" x 33/8" $ 5.49 set 34303 Kerf, 3" x 43/4" . . . . . . $ 5.99 set 24299 Kerf, 2" x 41/2" . . . . . . $ 4.49 set 24281 Kerf, 11/2" x 3" . . . . . . $ 3.49 set

Surface mount Kerf mount

Drop Leaf Supports For tables with aprons. To determine correct support for your table, measure distance “A" (apron to hinge pin center), then determine “B" on the graph by matching “A" with the drop leaf support length. Brass finish. Screws included. . 29520 6" . . . . . . . . . . . . . . . . $ 14.99 pr. 29538 8" . . . . . . . . . . . . . . . . $ 16.99 pr. 29546 12" . . . . . . . . . . . . . . . $ 19.99 pr. 29652 12" (For No Apron) . $ 21.99 pr.

Table top

29520

The best built extension slides! Smooth operation with zero sagging or binding. Two slides per set:

Folding Leg Brackets Able to support even large and heavy tables, this bracket can fit any size leg to its folding flange! For added security, each bracket features “positive lock” in open and closed positions. Mounting screw included. Statuary bronze finish. Measures 21/4” x 21/4” x 23/4”. 39505 . . . . . . . . . . . . . . . . . . . $ 15.99 pr.

36" slide for large rectangular tables. Gives maximum opening of 38". 29496 Wood 23/8" H . . . . . . $ 79.99 set 29694 Steel 21/2" H . . . . . . $ 134.99 set36" wood slide with a 621⁄4" maximum opening. 36" steel slide with a 64" maximum opening. 29504 Wood 23/8" H . . . . . $ 109.99 set 29702 Steel 21/2" H . . . . . . $ 224.99 set

Table Leaf Aligners The plates interlock tightly to align table leaves and provide flat, flush table tops. A slight bend at the mouth makes an easy fit even when sliding misaligned leaves together. Zinc-plated steel. Screws included. Six pairs per pack. 48840 . . . . . . . . . . . . . . . . . . . . $ 4.99 pk.

Wood Equalizer Slides

Super easy one-handed extension! As you pull on

one half, the other side moves away. The 28” slide can handle

two 12” leaves, and the 38” model can handle three 12” leaves or two 18” leaves. Slides are 3” wide by 23/8” high and have built-in rack-and-pinion assemblies. Pairs. 29611 28" Wood . . . . . . . . . $ 69.99 set 70334 38" Wood . . . . . . . . . $ 99.99 set

Table Pins Hold table leaves or halves in perfect alignment. Brass pins are 5/16” dia. Wood and plastic pins measure 3/8” in dia. x 11/4” L. 8 per pack. 32334 Brass . . . . . . . . . . . . . $ 14.99 pk. 21253 Wood . . . . . . . . . . . . . . $ 3.99 pk. 28548 Plastic . . . . . . . . . . . . . $ 2.99 pk.

21253

28548

32334

Card Table Leg Brackets Solidly built for durability. Brackets firmly lock card table legs open for stability and allow them to fold up easily. Use with 11/4" to 13/4" square legs. Reversible right or left. Nickel plated. 63198 . . . . . . . . . . . . . . . . . . . $ 22.99 pr.

9 pk.

he

39.99 39.99

Black

ts

om

50+3.23

9

oo ut.

$ 2.99 $ 3.99 $ 4.99 $ 6.99 $ 9.99

99

Table Hardware

rockler.com

Folding Leaf Hinges Add narrow leaves to your table to create a round or oval top. 51/4" x 73/4" mechanism doubles as a hinge and support, and locks leaves in closed or open position. Stiff brass-plated steel prevents sagging. No other supports are required. For leaves up to 9" wide. Requires routing. 28928 . . . . $ 17.99 pr.. . . $ 16.19 4 + pr.

Drop Leaf Hinges Surface mount to underside of table top. Steel hinges are 11/2" wide x 33/16" long. Application A 29249 Butt Joints . . . . . . . . . $ 11.99 pr.Application B 29256 Rule Joint . . . . . . . . . $ 11.99 pr.

A B


01192018091342

Pro and Keep organblow cente(sold 47416

1/4" Cushioned Shelf Pins Made of brass-plated steel with a plastic-wrapped support that is gentle on shelves. Packs of 16. 81844 . . . . . . . . . . . . . . . . . . . . $ 8.99 pk.

1/4" Shelf Supports Packs of 16. 33860 Nickel . . . . . . . . . . . . . . $ 5.99 pk. 33902 Ant. Brass . . . . . . . . . . $ 5.99 pk. 33894 Brass . . . . . . . . . . . . . . $ 5.99 pk. 33928 Rubber Cushions . . . . $ 5.99 pk.

5mm Pin Supports Packs of 16. 30692 Brass 22880 Antique Brass Price. . . . . . . . . . . . . . . . . . . . . $ 3.99 pk. 5mm Optional SleevesUse with 5mm shelf supports. Packs of 16. Perfect for use with the JIG IT system. Require a 7/32" hole. 22963 Brass 22971 Antique Brass Price. . . . . . . . . . . . . . . . . . . . . $ 3.99 pk.

22989 Nickel 22997 Black

22898 Nickel 22955 Black

5mm Shelf Supports Projects 5/8". Packs of 16. Requires a 5mm hole. 22252 Brass . . . . . . . . . . . . . . $ 4.49 pk. 22278 Nickel . . . . . . . . . . . . . . $ 4.49 pk.

Installation Kit Contains six #12 21/2" flathead Phillips screws with black and white head covers. 68346 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.99

Items with a star ★ are oversize packages, and special charges apply. Please ask for specific shipping charges when placing your order.

freedomRail Standards Each 10 + 68122 48" . . . . . . . . . . . $ 13.99 $ 12.59 68130 63" . . . . . . . . . . . $ 15.99 $ 14.39 ★ 68163 78" . . . . . . . . . $ 19.99 $ 17.99

freedomRail Brackets Each 10 + 68171 81/2" . . . . . . . . . . . $ 5.99 . . $ 5.39 68197 101/2" . . . . . . . . . . $ 5.99 . . $ 5.39 68213 121/2" . . . . . . . . . . $ 7.99 . . $ 7.19 68239 141/2" . . . . . . . . .$ 10.99 . . $ 9.89

Epoxy-Coated freedomRail Shelf Standards and Brackets Look great and handle heavy loads. Steel brackets secure to the 14-gauge 1" W x 5/8" deep steel standards on the freedomRail system. Chip-resistant epoxy finish.

LOAD RATINGS 81⁄2" bracket 187 lbs. 101⁄2" bracket 165 lbs. 121⁄2" bracket 132 lbs. 141⁄2" bracket 198 lbs.

1/4" Shelf Glass Supports Clear plastic. Packs of 16. 34082 . . . . . . . $ 4.99 pk.

2287222765

22856

22781

818362286422773 30437

1/4" Pin Supports and Optional Sleeves These supports (with or without sleeves) are perfect for use with the JIG IT Shelf Drilling System. The Optional Sleeves require a 9/32" hole. Packs of 16.

1/4" Pin Supports 22773 . Nickel 30437 . . Brass Price. . . . . . . . . . . . . . . . . . . . . $ 4.99 pk.

22765 Antique Brass 22781 . . . . . . . . Black

1/4" Optional Sleeves 22864 . Nickel 81836 . . Brass

22856 Antique Brass 22872 . . . . . . . . Black

Price. . . . . . . . . . . . . . . . . . . . . $ 4.49 pk.

1/4" Locking Shelf Supports Secures 3/4" shelves. Use a 1/4" pin hole. Packs of 16. 24398 . . . . . . . . . . . $ 5.99 pk.

22963

30692

WalnutAluminum

Brass finishSteel Zinc-plated

Steel

White epoxy Steel

Brass finish flush –or surface-mounted standards.

Length Each 10 + 33779 24" . . . $ 2.99 . . . . . . $ 2.69 33787 36" . . . $ 3.99 . . . . . . $ 3.59 33795 48" . . . $ 5.49 . . . . . . $ 4.94 33803 60" . . . $ 6.49 . . . . . . $ 5.84 ★ 33811 72" . $ 7.99 . . . . . . $ 7.19

Supports for Brass Standards 33910 . . . . $ 8.99 pk. . . . $ 8.09 5 + pks.

Zinc-plated flush –or surface-mounted standards

Length Each 10 + 33944 24" . . . . $ 1.49 . . . . . . $ 1.34 33951 30" . . . . $ 1.99 . . . . . . $ 1.79 33969 36" . . . . $ 2.49 . . . . . . $ 2.24 33977 48" . . . . $ 3.49 . . . . . . $ 3.14 33985 60" . . . . $ 3.99 . . . . . . $ 3.59 ★ 33993 72" . . $ 4.99 . . . . . . $ 4.49

Supports for Zinc Standards 33837 . . . . $ 5.99 pk. . . $ 5.39 5 + pks.

White epoxy coated flush – or surface-mounted standards.

Length Each 10 + 21999 24" . . . . $ 2.99 . . . . . . $ 2.69 22054 30" . . . . $ 3.49 . . . . . . $ 3.14 22062 36" . . . $ 3.99 . . . . . . $ 3.59 22070 48" . . . . $ 5.49 . . . . . . $ 4.94 22088 60" . . . . $ 6.49 . . . . . . $ 5.84 ★ 22096 72" . . $ 7.99 . . . . . . $ 7.19

Supports for White Standards 22153 . . . . $ 8.99 pk. . . $ 8.09 5 + pks.

Supports for Walnut Standards 33852 . . . . $ 9.99 pk. . . $ 8.99 5 + pks.

Walnut flush – or surface-mounted standards. Aluminum.

Length Each 10 + 34009 24" . . . $ 2.99 . . . . . . $ 2.69 34017 30" . . . $ 3.49 . . . . . . $ 3.14 34025 36" . . . $ 4.49 . . . . . . $ 4.04 34033 48" . . . $ 5.99 . . . . . . $ 5.39 34041 60" . . . $ 6.99 . . . . . . $ 6.29 ★ 34058 72" . $ 7.99 . . . . . . $ 7.19

5/8" Shelf Standards and Supports Sturdy, attractive standards can be surface or flush mounted (as shown). Cold-rolled steel (walnut standards are aluminum). Nails furnished. 5/8" W x 3/16" thick. Shelves may be adjusted for 1/2" spacing. Supports are 9/16" W x 3/4" L, 16 per pack.

Benc Compin a wincluddrill bwhatebuilt alongcabinbutteframeand d32mm 46350

68171

68122

Brackets have no upturns, allowing shelves to extend beyond the end.

5mm Low Profile Hidden Supports Totally concealed once shelf is installed. Cut a 1/8” mortise in shelf edges. Packs of 16. Brown plastic. Inserts in 5mm hole. 22286 . . . . . . . . . . . . . . . . . . . . $ 4.99 pk.

1/4" Plastic Shelf Supports Fluted peg for grip and easy press-fit insertion. Durable polymer. Packs of 16.

57575 54026

57575 Tan . . . . . . . . . . . . . . . . $ 3.99 pk. 54026 Clear . . . . . . . . . . . . . . $ 3.99 pk.

Heav RuggbrackAllowshelvand tBlack 44162 49586 44026White 45300 49052 46269

Fold Flexibsturdypair! lever.70º. Z 65806 65798

sold es. When helf pin

100

Shelf Building

800-279-4441



Pro Shelf Drilling Jig Drill both front and rear shelf holes without having to reset the jig! Twin template tracks joined by rigid rails eliminate the possibility of misalignment. Inside surface is lined with soft gripping material that ensures jig won't shift. Included indexing pins (two 1/4", two 5mm) eliminate the need for clamps. 32mm spacing and 37mm setback. 24"L. Works with panels 81/4"W to 251/4"W. Patent pending. 31571 Pro Shelf Drilling Jig . . . . $ 99.99 ea. 42172 7/32" Index Pins (2) . . . . . . $ 4.99 pk. 42174 9/32" Index Pins (2) . . . . . . $ 4.99 pk. 40604 1/4" Pro Shelf Bit . . . . . . . $ 16.99 ea. 40608 5mm Pro Shelf Bit . . . . . . $ 16.99 ea. 41981 7/32" Pro Shelf Bit . . . . . . $ 16.99 ea. 41983 9/32" Pro Shelf Bit . . . . . . $ 16.99 ea. NEW Index Pins 51677 1/4" Pro Shelf Index Pins (2) . . . $ 4.99 51999 5mm Pro Shelf Index Pins (2) . . $ 4.99

Pro Shelf Drilling Bit and Index Pin Case Keep your shelf drilling bits and pins organized and in one place! Heavy-duty blow molded case holds four self-centering bits and four sets of index pins (sold separately). 47416 . . . . . . . . . . . . . . . . . . . . . . . $ 9.99

9 pk.

16. 9 pk. 9 pk. 9 pk. 9 pk.

f 16. 9 pk. Blind Shelf

Supports Easily create shelves that appear to float on the wall! Sturdy metal hardware supports slide inside the shelf so its completely invisible. Includes two supports and mounting brackets for one shelf up to 34" long, 8" deep and at least 1" thick. Detailed instructions. 20103 . . . . . . . . . . . . . . . . . . . $ 19.99 set Extra Long Drill Bit 28855 7/16" . . . . . . . . . . . . . . . . $ 19.99

10 +$ 1.34 $ 1.79 $ 2.24 $ 3.14 $ 3.59 $ 4.49

pks.

pks.

ed

10 +$ 2.69 $ 3.14 $ 4.04 $ 5.39 $ 6.29 $ 7.19

led elves

JIG IT® Shelf Drilling JigWorks with both face frame and frameless construction. Precisely spaces shelf pin holes 32mm (11⁄4") apart and 37mm or 64mm from the edge. In addition, simply index the 20" long template with a shelf pin and extend the jig's range for any length run of holes. Use with 1/4" or 5mm self-centering bits or with 7/32" or 9/32" bits for pin sleeves.

Replacement Bits Drill bit only, without the self-centering device. 22583 1/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 7.99 22591 5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 7.99 34316 7/32" (for use with 5mm shelf pin sleeves) . . . . . . . . . . . . . . . . . . . . . . .$ 8.99 34329 9/32" (for use with 1/4" shelf pin sleeves) . . . . . . . . . . . . . . . . . . . . . . . .$ 7.99

JIG IT® Shelf Drilling Sets Set includes the JIG IT template and the self-centering bit. 32991 Shelf Jig and 1/4" bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 34.99 35151 Shelf Jig and 5mm bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 34.99 Self-Centering Bits Designed specifically for Rockler, these bits offer dead-on centering accuracy. 22567 1/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 16.99 22575 5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 16.99 34342 7/32" (for use with 5mm shelf pin sleeves) . . . . . . . . . . . . . . . . . . . . . .$ 16.99 34368 9/32" (for use with 1/4" shelf pin sleeves) . . . . . . . . . . . . . . . . . . . . . . .$ 16.99

Bench Dog® Shelf Pin Jig Compact and portable, this jig works in a wide variety of situations. Just use included index pin and self-centering drill bit to daisy-chain shelf pin holes to whatever length desired. Ideal for pre-built or site-built cabinets. Non-slip fence along one edge for use on frameless cabinets, while opposite edge can be butted against cabinet back or face frame lip. Onboard storage for index pin and drill bit. Drills 1/4" shelf pin holes. 32mm hole spacing and 37mm setback. 46350 . . . . . . . . . . . . . . . . . . . . . . $ 19.99

Unique designallows 1/4", 5mm,

7/32" and 9/32" holes with the same jig!

Self-centering bit

Handle includes two storage compartments forself-centering bits!

ONLINE VIDEO!

ONLINE VIDEO!

Two sets shown

lled. acks

m hole. 9 pk.

Heavy-Duty Steel Shelf Brackets Rugged 1/8" thick steel, these shelf brackets can hold up to 1000 lbs. each. Allows for easy access underneath. For shelves, countertops, desks, lumber racks and tool storage. Black Pair 44162 8" x 12" . . . . . . . . . . . . . . $ 22.99 49586 12" x 18" . . . . . . . . . . . . $ 26.99 44026 15" x 21" . . . . . . . . . . . . $ 32.99 White Pair 45300 8" x 12" . . . . . . . . . . . . . . $ 22.99 49052 12" x 18" . . . . . . . . . . . . . $ 27.99 46269 15" x 21" . . . . . . . . . . . . $ 32.99

Folding Shelf Bracket Flexible enough to work in tight spaces, sturdy enough to hold up to 750 lbs. per pair! Spring-loaded, one-handed release lever. Brackets adjust to 90º, 80º and 70º. Zinc-coated steel construction. 65806 16" . . . . . . . . . . . . . . . $ 37.99 ea. 65798 12" . . . . . . . . . . . . . . . $ 26.99 ea.

101

Shelf Building

rockler.com


01292018104201

Please check measurements carefully, accuracy is essential!Select hinge style:

This will determine what size overlay is needed.

Determine order sizes: For 1/2" overlay add 1" to the width and 1" to the height of each opening size. If your application requires a different overlay, adjust the measurements accordingly. For inset applications, subtract no less than 1/4" on both width and height of cabinet opening measurements. Doors and drawer fronts will be custom-made to the sizes you specify, so measure carefully. Standard drawer front panel wood grain runs horizontally.

• Order two doors to cover any opening more than 22" wide Doors over 26" in width and/or 48" to 50" in height may have double panels.

• Minimum Size Information: If you use a minimum size you must add 4" to the other dimension.

• We guarantee no warping or cracking on doors sized up to 23" wide and/or 46" high; drawer fronts up to 30" wide and/or 12" high.

• When ordering doors of differing sizes or styles, mullions may not line up.

25% restocking charge

Doors over 60" incur an additional $75 charge per order.

Minimum charge per drawer front is 216 square inches.

Tolerances: Sizes received may be 1/16" larger or smaller than sizes ordered.

How to measure your doors and drawer fronts:

Save time and money with quality made-to-order doors and drawer fronts!Price is based on style, size and species, calculated per sq. ft.

Approximate price of 16" x 27" (3 sq. ft.) Door:Flat panel door (see Adobe), in oak is $54. Raised panel door (see Revere) in oak is $77.

Approximate price of 16" x 9" (1 sq. ft.) Drawer Front:Flat drawer front in oak is $23. 5-pc. drawer front in oak is $50.

Actual prices quoted by phone or at rockler.com/customdoors. Please allow 3-4 weeks for delivery.

Door

Heig

ht (G

rain

)

Width

PanelProfile

FrameOutsideEdge

Frame InsideEdge

Frame Inside Edge

Panel ProfileFrame Outside Edge

Door anatomy

Wood species choices — Unfinished wood sanded smooth

Red Oak Maple Ash Cherry Hickory

Pre-finished RTF choices — More colors online

949 White Honey Apple Chocolate Pear Summer Flame

Call 800-279-4441to speak with our knowledgeable sales staff to discuss options, obtain a quote or place an order

See many more styles and options by visiting rockler.com/customdoors or calling 800-279-4441.

Get a quote on the wide range of options.

Panel grain runs horizontally

Drawer Front

Heig

ht

Width

3/4

FlaMin.Max

3/4

3/4Plyw

4028Min. Max.Centestand

3/4"

3029Min. Max.CenteArche

30593529Min.Max.Cent

3066Min.Max.Cent

3/4

PLEASE ALLOW 3-4 WEEKS FOR DELIVERY102 800-279-4441

Custom Doors and Drawer Fronts


01292018102630

tial!

s nts. y,

t

ger

3/4" Wood Drawer Fronts36235ss

Flat Drawer FrontMin. size: 51⁄2" x 31⁄2"Max. size: 33" x 10"

36007ss5-Pc. Drawer FrontMin. size: 71⁄2" x 6"

11⁄2" railsMax. size: 33" x 10"

3/4" Economical Pre-finished RTF Doors and Drawer Fronts (RTF is not paintable)

40271ss – JR7 Square Corner21⁄8" Rail/Style

Min. size: 71⁄2" x 71⁄2"Max. size: 36" x 72"

Style 727

40285ss – JR7 Square Corner

Min. size 61⁄2" x 51⁄2"Max. size: 33" x 10"

Save production time. Save money.

You order it, we build it!

40744ss – AP758 Round Corner

21⁄16" Rail/StyleMin. size: 91⁄2" x 10"Max. size: 36" x 72"

Style 758

40697ss – AP758Flat


40713ss – AR756Round Corner

21⁄16" Rail/StyleMin. size: 8" x 8"

Max. size: 36" x 72"Style 756

40730ss – AR756Round Corner


3/4" Wood Frame Flat Panel Doors – Plywood panel, wood frame. 21⁄4" rail/stile.

38795ss – Auburn Min. size: 10 3⁄4" x 71⁄2"Max. size: 34" x 72"Center railstandard is 50"

35484ss – AdobeMin. size: 71⁄2" x 71⁄2"Max. size: 30" x 72"

Center rail standard is 50"

40289ss – CamdenMin. size: 71⁄2" x 71⁄2"Max. size: 30" x 72"Center railstandard is 48"

3/4" Wood Frame Raised Panel Doors — 21⁄4" rail/stile

30295ss – PatriotMin. size: 91⁄2" x 91⁄2"Max. size: 263⁄4" x 72"Center rail standard is 48"Arched height 41⁄4"(side)

31585ss – LibertyMin. size: 91⁄2" x 91⁄2"Max. size: 263⁄4" x 72"Center rail standard is 48"Arched height 41⁄4"(side)

Profile for Auburn and Adobe

30596ss – Patriot Lites and 35298ss – Liberty LitesMin. size: 111⁄2" x 14"Max. size: 261⁄4" x 72"Center rail standard is 66"

30661ss – Revere Lites Min. size: 111⁄2" x 111⁄2"Max. size: 30" x 72"Center rail standard is 66"

Recommended numberof lites per door:

To 25" H – 4 lites. To 42" H – 6 lites. To 50" H – 8 lites. Over 50" – 10 lites.

Glass not included.

3/4" Wood Frame Doors with Lites — 21⁄4"rail/stile

35298ssLiberty Lites

30661ssRevere Lites

30596ssPatriot Lites

RY

35778ss – Revere Min. size: 71⁄2" x 71⁄2"Max. size: 30" x 72"Center rail standard is 48"

103rockler.com

Custom Doors and Drawer Fronts


01192018091613

11⁄4" Use tjig to self-cto-fol 45983

11⁄4" Creatcut wguidelouve 49470 62984

Stile

Fron For 1 40802

Fro Fron Used hand 47678

47678

Saveas

FRhow

FREpla

Groove Type requires 1/8" kerf. 25' length. 32851 Walnut . . . . . . . . . . . . . . $ 19.99 32189 Fruitwood . . . . . . . . . . . $ 19.99 38896 Clear . . . . . . . . . . . . . . . . $ 14.99

Staple Type approximate size 1/4" x 1/4". 25' length. 34739 Walnut . . . . . . . . . . . . . . $ 19.99 34748 Fruitwood . . . . . . . . . . . $ 19.99

3474832851 38896

Plastic Panel Retainer Easily cut or miter our flexible retainer with a knife or scissors.

Glass Door Pivot Hinges No drilling required. For inset applications. Pressure screws will hold 1/4" thick glass securely in the hinge. Requires a 9mm hole for pivot bushing. 28 lb. load rating. Magnetic catch required. 30015 Polished Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.99 pr. 30023 Satin Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.99 pr. 30031 Polished Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.99 pr.

Rubber Glass Retainer Clips Each pack includes 8 metal clips, 8 short tips, 8 long tips, and 8 screws. Both clips AND tips can be flipped for varying offsets. Clips measure 3/8" x 1". 26884 Antique Bronze . . . . . . . . $ 5.49 22359 Zinc . . . . . . . . . . . . . . . . . . $ 4.99

Glass Door Locks Slips on edge of glass door at any location - no boring required! Available for one or two-door locking. Strike plate, screws and two keys included. Keyed alike. Nickel finish. 33568 Single Door . . . . . . . . . . $ 24.99 32389 Double Door . . . . . . . . . $ 19.99

32389

33568

Quarter Round Moldings 48" L x 1/4" H. Minimum order is $5.00. Per Pc. 20 + 22939 Walnut . . . .$ 8.99 . . . . . . $ 8.09 22954 Oak . . . . . .$ 5.99 . . . . . . $ 5.39 92536 Birch . . . . . .$ 5.99 . . . . . . $ 5.39

22939

Tapered Retainers Use 28530 for recessed applications when dado is 1/8" deeper than glass thickness. Use 92289 when glass is flush. Brown plastic. 8 per pack. 28530 . . . $ 4.99 pk. . . .$ 4.49 5 + pks. 92289 . . . $ 4.99 pk. . . .$ 4.49 5 + pks.

28530 92289

Extruded Aluminum Pull Use on 1/4" glass and panel doors. Spring tensioned for a firm, secure hold. 23/4" long. 26575 Aluminum . . . . . . . . . $ 4.99 ea. 66704 Bronze Finish . . . . . . $ 12.99 ea.

Plastic Sliding Door Track Made especially for small, lightweight bypassing doors. Includes durable upper glide and track. 4' length easily cuts to size. 10007 Walnut Tone $ 17.99 10014 Black . . . . . . .$ 18.99

E-Z Glide Tracks For 1/4" glass doors. Includes aluminum upper glide, shoe, track and nylon rollers. Track can be cut to length with a hacksaw. Aluminum 26609 3 ft. . . . . . $ 37.99 set 26617 4 ft. . . . . . . $ 51.99 setBronze Finished 66688 3 ft. . . . . . . $ 51.99 set 66696 4 ft. . . . . . . $ 64.99 set

No-Bore Magnastrike Easy clip-on strikes for 1/4" glass doors with magnetic touch latches, not included. Self-adhesive foam rubber pad holds strike in place. 30049 Polished Brass . . . . . . . . . $ 2.99 30056 Satin Black . . . . . . . . . . . . $ 2.99 30064 Polished Chrome . . . . . . . $ 3.49

Glass Retainers Adjusts to fit various recess depths. Simple surface mounting allows fast installation and quick removal for cleaning. Statuary bronze finish with a black plastic tip. 4 per pack. 28902 . . . . . . . . . . . . . . . . . . . $ 3.99 pk.

Recessed Panel Retainer For panels recessed 1/4". Use 1/2"-#5 screws. 8 per pack. 28514 . . . .$ 3.99 pk.. . . $ 3.59 5 + pks.

Swivel Mirror Screws A 31/2" long steel bolt with a styled brass head. Includes 3/8" threaded insert. Allows easy mirror movement. 31623 Antique Brass . . . . . $ 15.99 pr. 31630 Polished Brass . . . . . $ 12.99 pr.

Rear-Mounted Swivel Mirror Hinge Mirrors swivel with ease. Made of heavy gauge brass-plated steel. Screws furnished. For low profile applications. 32136 . . . . . . . . . . . . . . . . . . . $ 7.99 pr.

Glass Door Retainer Clips Kit Includes removable plastic inserts for three different rabbet depths and glass thicknesses. Includes eight clear plastic retainer clips; eight inserts each for 1/8", 3/16" and 1/4" glass; and eight #6 x 5/8" screws. 32887 . . . . . . . . $ 5.99

3003130023

Find glass and grille at rockler.com

104

Glass Door Hardware

800-279-4441



21⁄2" Louvers Shutter Jig Kit — Movable and Fixed 31⁄2" Louvers Shutter Jig Kit — Movable and Fixed Stile and louver jigs show exactly where to drill holes for shutter pins and control arm fasteners, and are designed for either fixed or movable louver configurations. Kits include stile jig, louver jig, three self-centering bits that provide precise drill depths, index pins and easy to follow instructions. Patent Pending. 44342 21/2" Movable and Fixed Shutter Jig Kit . . . . . . . . . . . . . . . . . . . . . . . .$ 134.99 47674 31/2" Movable and Fixed Shutter Jig Kit . . . . . . . . . . . . . . . . . . . . . . . .$ 134.99 45193 Irwin 6" Mini Bar Clamps, 2-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 29.99

11⁄4" Louvers Shutter Jig Kit — Movable Use the stile jig to drill holes on both stiles at the same time, then use the louver jig to drill accurately-placed holes for shutter pins and control arm fasteners. Three self-centering bits keep you at precise drill depths. Also includes index pins, and easy-to-follow jig instructions. 45983 11/4" Movable Shutter Jig Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 84.99

11⁄4" Louvers Shutter Jig Kit — Fixed Create a fixed 11/4" x 1/4" thick louvered shutter with fully mortised louver tenons cut with a router and our template guide. Kit includes stile jig/template, and router guide bushing. Use with a 1/4" up cut spiral router bit (#62984, sold separately). No louver jig required. Patent Pending. 49470 11/4" Fixed Shutter Jig Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 59.99 62984 1/4" x 1" x 1/4", HSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 14.99

Stile JigIndex Pins Self-centering Bits

Louver Jig

21⁄2" Louvers 31⁄2" Louvers11⁄4" Louvers

Movable Louverwith Front Control Arm

Movable Louver with Hidden Control Arm

47678

45400

40810

Check out rockler.com/shutter for additional hardware and jigs that make installation a breeze!

49991

45400

Hidden Control Arm Jig Kit Rear-mounted control arms lend a clean, modern look to your wooden shutters. For 21/2" and 31/2" louvers only. Includes jig, self-centering bit for perfect hole location and replacement 1.2mm drill bit. Use with our Shutter Jig Kits for 21/2" or 31/2" Louvers (44342 and 47674, sold separately). 45143 Drilling Jig and Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 25.99 49991 Hidden Control Arm for 21/2" Louvers . . . . . . . . . . . . . . . . . . . . . . . . . .$ 19.99 45400 7/8" Stainless Steel Nails, 50-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 2.99

Front Control Arms for Movable Louver For 11/4" louvers: use small arm. For 21/2" and 31/2" louvers: use large arm. 40802 Small, 5/16" x 1/2" x 36" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 2.49

Front control arm Hidden control arm

Front Control Arm Fasteners Used with our Movable Shutter Jig Templates, these fasteners are easy to install by hand or using a pliers. Once embedded, they won't come loose! Patent pending. 47678 50 per Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99

47678

Mouse Hole

40810

(Rear View)

(Front View)

Save hundreds of dollars with our easy-to-use shutter jigs!

FREE Shutter Design Wizard and how-to video at rockler.com/shutter

FREE plans!

ONLINE VIDEO!

not pad

2.99 2.99 3.49

a

9 pk.

#5

pks.

brass

9 pr.9 pr.

ews ns. 9 pr.

105

Rockler® Shutter System

rockler.com


01192018091843

Patterned from the original Stickley designs, this authentic cast copper hardware has been re-issued exclusively for Rockler

26740, 38510, 26757

26823

33929

1087734312

Knob

Knob and Pull Information: C2C = Center to Center, L = Total Length, Dia. = Diameter, Proj. or P. = Projection

62919

62935

10871 10910

10988, 10962

5259850373

56313

10308

10315

Arts and Crafts 62919 11⁄2"C2C, 33⁄4"L, 19⁄32"Proj.. $ 14.99 62935 23⁄8"C2C, 33⁄4"L, 19⁄32"Proj. . .$ 9.99 10301 3/33⁄4"C2C, 5"L, 7/8"Proj. . .$ 4.99 10308 75/95mmC2C, 51⁄8"L, 13⁄16"P. .$ 4.99 10315 25⁄8"L, 1"Proj. . . . . . . . . . . . . .$ 4.99 10988 96mmC2C, 41⁄2"L, 1"Proj. $ 10.99 10962 3"C2C, 37⁄8"L, 1"Proj. . . . . . .$ 9.99 10871 11⁄4"Dia., 11⁄4"Proj. . . . . . . . . .$ 8.99 10910 11⁄4"Dia., 11⁄4"Proj. . . . . . . . . .$ 6.99 Wood 52598 11⁄4"L, 7/8"Proj.. . . . . . . . . . . .$ 2.99 50373 13⁄4"L, 11⁄4"Proj. . . . . . . . . . . . .$ 2.99 56313 3"C2C, 43⁄8"L, 11⁄16"Proj. . . .$ 4.99

10301

3546626815

Sati 46666 45271 46534 54107 49558 51204 54344 56571 50796

Oil R 47144 58269 59677 53815 47040 44011 59753 57643

Brus 53604 59323 58889 50208 54851 58908 59064

Arts and Crafts — StickleyDark Copper 34312 15⁄8"C2C, 415⁄16"L, 9⁄16" Proj. $ 44.99 26740 15⁄8"C2C, 33⁄4"L, 9⁄16" Proj.. $ 27.99 26757 17⁄16"C2C, 33⁄16"L, 9⁄16"Proj. $ 25.99 10877 115⁄32"L, 9/16"Proj. . . . . . . . $ 20.99 26823 37⁄8"L, 9/16"Proj. . . . . . . . . $ 23.99 33929 11⁄2"Dia., 11⁄4"Proj. . . . . . . . $ 13.99 26815 23⁄8"L, 3/4"Proj.. . . . . . . . . . $ 15.99 35466 55⁄16"L, 3/32"Proj. . . . . . . . . $ 15.99 62943 11⁄2"C2C, 31⁄4"L, 5/8"Proj. $ 29.99 62950 15⁄8"C2C, 33⁄4"L, 5/8"Proj. $ 33.99 Light Copper 35649 11⁄2"C2C, 31⁄4"L, 5/8"Proj. $ 33.99 31556 15⁄8"C2C, 33⁄4"L, 5/8"Proj. $ 43.99 38510 15⁄8"C2C, 33⁄4"L, 9/16"Proj. $ 32.99

Campaign HardwareSolid Brass 48875 21⁄2"W x 11⁄2"H . . . . . . . . $ 19.99 47261 11⁄4"W x 11⁄2"H. . . . . . . . . $ 14.99 48069 13⁄4" Round . . . . . . . . . . $ 14.99 43912 11⁄2"W x 2"H . . . . . . . . . . $ 19.99 44138 35⁄8"W x 2"H . . . . . . . . . . $ 24.99 47471 39⁄16"W x 13⁄4"H . . . . . . . . $ 19.99 Antique Solid Brass 47945 21⁄2"W x 11⁄2"H . . . . . . . . $ 19.99 45343 11⁄4"W x 11⁄2"H. . . . . . . . . $ 14.99 47359 13⁄4" Round . . . . . . . . . . . $ 14.99 45811 11⁄2"W x 2"H . . . . . . . . . . $ 19.99 46775 35⁄8"W x 2"H . . . . . . . . . . $ 24.99 43759 39⁄16"W x 13⁄4"H . . . . . . . . $ 19.99

35649, 31556, 62943, 62950

Polis 10076 35394 35402 10106 37663 36459 36467 36475 35451 10110 29351 10079

48875, 47945

Straps and Corners 46107 Solid Brass, 2" x 3/4" . . . . $ 4.99 47920 Antique Brass, 2" x 3/4" . $ 4.99 45921 Antique Brass 2" x 3/4". . $ 7.99 48362 Solid Brass 2" x 3/4" . . . . $ 7.99

* Finish Abbreviations: AB = Antique Brass, ABD = Antique Brass Distressed, ABDK = Antique Brass Dark, FRAG = French Antique Gold, OIR = Old Iron, ORB = Oil Rubbed Bronze

58708 59118

596721013048

1013065

53102

58179

5396358617

58293

59657

1013054

59612

58737

Period Reproductions*Louis XVI Period Hardware 59118 OIR , 1" Dia., 3⁄4"Proj.. . . . . $ 9.49 58708 ABDK, 13⁄16" Dia., 7⁄8" Proj. $ 9.49 59672 ABDK, 113⁄16" Dia. , 7⁄16 Proj. $ 13.99 1013048 ABDK, 11⁄4" Dia.,13⁄16 Proj. $ 6.49 52259 OIR, 15⁄16" Dia., 5⁄8" P.. . . . $ 11.99 52953 ABDK, 15⁄8" Dia., 5⁄8" Proj. . $ 9.99 59612 ORB, 37⁄16"W x 11⁄2" H . . . $ 14.99 1013072 ABDK, 5"W x 113⁄16"H $ 18.99 1013065 AB, 11⁄4"W x 21⁄4"H . . $ 9.49 58737 FRAG, 11⁄8"W x 61⁄4"H. . . $ 26.99 1600 Circa Hardware 53963 ABD, 1" Dia.,13⁄16" Proj. . . $ 5.49 58617 ABD, 13⁄16" Dia., 15⁄16" Proj. $ 6.49 1700 Circa Provenzale Brass 1013069 ABD, 47⁄8"W x 17⁄8"H . $ 15.99 59657 ABD, 7"W x 21⁄8"H . . . . . $ 23.99 58293 ABD, 15⁄8" Dia., 15⁄16" Proj. $ 9.99 58179 ABD, 3⁄4"W x 23⁄8"H. . . . . . $ 9.49 1800 Circa Bosetti Marella Drop Pull 1013054 AB, 7⁄8"W x 55⁄8"H. . . . $ 21.99 Classic Bin and Ring Pulls 55332 ABD, 21⁄8"W x 13⁄4" H. . . . . $ 8.99 57690 ABD, 25⁄8"W x 21⁄8"H. . . . $ 11.99 53102 ABD, 215⁄16"W x 11⁄2" H . . . $ 5.49

57690

55332

52259

52953

1013072

1013069

267267222672677267262677726726726777267267626767267267267667626726726726767267267267267267674040400440404040404040004040404040040440,0404404040,4040,40,40,4040,4040,40,4 ,4 3338383838383838838383838338383833838833838383838383838851051051051000105105100051051010510110510510051510510000051010510510510510051510510510 2222222222222, 222222, 2, 22, 2, 22, 222676756756676756675555675675675675675675667556756756767567567567567567567567566756756757 77777777777777777777777

2682682682682688822626 23232323233356356356356565556563565655 49494949494494994 31313131311313315565565565565565655665566666666555 66666666666666629429292942294294294494994442 443333333 629629629629626 5050505050505050055050

33933339339339339339393939999993933939339339333933933939399333333 29292292929292929292929292292929292929292929292992999

10810810808008888810810808080888108108080 77777777777777777777777777777773433433433433433434433334312121212122212112

268268226826826826268268826826868222 1515151555555555515155

47471, 4375946775, 44138

45811, 43912

45343, 4726148069, 47359

46107, 47920

45921 48362

106

Knobs and Pulls — Furniture

800-279-4441


01192018094330

Knob and Pull Information: C2C = Center to Center, L = Total Length, Dia. = Diameter, Proj. or P. = Projection

14.99 $ 9.99 $ 4.99 $ 4.99 $ 4.99 10.99 $ 9.99 $ 8.99 $ 6.99

$ 2.99 $ 2.99 $ 4.99

Satin Nickel 46666 13⁄16" Dia., 11⁄8"Proj.. . . . . . . . $ 3.19 45271 1" Dia., 15/16" Proj. . . . . . . . $ 3.79 46534 1" Dia., 15/16" Proj. . . . . . . . $ 4.19 54107 11⁄2" Dia., 11⁄8"Proj. . . . . . . . . $ 3.29 49558 3"C2C, 311⁄16"L, 11⁄8"Proj. . . . $ 6.19 51204 3"C2C, 33⁄8"L, 11⁄8"Proj. . . . . $ 5.49 54344 96mmC2C, 6"L, 11⁄4"P. . . . .$ 11.49 56571 3"C2C, 4"L, 11⁄4"Proj. . . . . . . $ 6.09 50796 96mmC2C, 43⁄4"L, 13⁄8"P.. . .$ 12.49

Oil Rubbed Bronze 47144 13⁄16" Dia., 11⁄8"Proj. . . . . . . .$ 3.19 58269 11⁄8" Dia., 1"Proj. . . . . . . . . . .$ 3.49 59677 11⁄2" Dia., 11⁄8"Proj. . . . . . . . .$ 3.29 53815 3"C2C, 31⁄4"L, 11⁄8"Proj.. . . .$ 5.79 47040 3"C2C, 311⁄16"L, 11⁄8"Proj. . . .$ 6.19 44011 96mmC2C, 43⁄4"L, 11⁄16"P. . . .$ 9.49 59753 96mmC2C, 47⁄16"L, 11⁄16"P. . .$ 6.29 57643 3"C2C, 33⁄4"L, 13⁄16"Proj. . . .$ 3.79

46666 4653445271 54107

58269 59677

57643

53815

59753

51204

44011

5657154344

49558

47040

Brushed Brass 53604 11⁄4"L, 11⁄4"Dia., 11⁄4"Proj.. $ 10.49 59323 11⁄4"Dia., 11⁄4"Proj. . . . . . . . $ 10.49 58889 17⁄8"L, 11⁄16"Dia., 11⁄8"Proj. . .$ 6.99 50208 3"C2C, 41⁄2"L, 11⁄4"Proj. . . $ 14.49 54851 32mmC2C, 17⁄8"L, 1"Proj. . .$ 7.49 58908 3"C2C, 37⁄8"L, 1"Proj. . . . . $ 13.99 59064 33⁄4"C2C, 51⁄2"L, 1"Proj. . . . .$ 9.99

5932353604

54851

58908

58889

59064

50208

50796

47144

44.99 27.99 25.99 20.99 23.99 13.99 15.99 15.99 29.99 33.99

33.99 43.99 32.99

9.99 4.99 4.99 9.99

24.99 9.99

9.99 4.99 4.99 9.99

24.99 9.99

Polished Brass 1007622 21⁄2"C2C, 31⁄3"L, 11⁄8"Proj. . .$ 3.09 35394 3"C2C, 4"L, 1/2"Proj. . . . . . .$ 8.99 35402 31⁄2"C2C, 43⁄4"L, 1/2"Proj.. . .$ 9.99 1010626 11⁄4"Dia., 1"Proj. . . . . . . . .$ 8.99 37663 1/2"Dia., 9/16"Proj. . . . . . . .$ 2.99 36459 3/4"Dia., 3/4"Proj.. . . . . . . . .$ 3.49 36467 1"Dia., 1"Proj. . . . . . . . . . . . .$ 3.99 36475 11⁄4"Dia., 11⁄8"Proj. . . . . . . . . .$ 6.99 35451 5/8"Dia., 5/8"Proj.. . . . . . . . .$ 2.99 1011008 33⁄4"C2C, 51⁄8"L, 11⁄4"P. . $ 11.99 29351 3"C2C, 33⁄8"L, 11⁄4"Proj. . . . .$ 7.49 1007974 3"C2C, 51⁄2"L, 7/8"Proj. . .$ 1.59

1007974 1011008

376633645936467364753545135394, 354021007622

1010626

29351

Thousands more online at rockler.com/knobs-and-pulls

$ 9.49 $ 9.49 3.99

$ 6.49 1.99

$ 9.99 4.99 8.99

$ 9.49 26.99

$ 5.49 $ 6.49

5.99 23.99 $ 9.99 $ 9.49 Pull21.99

$ 8.99 1.99

$ 5.49

5825825582582582555555582696969699 5965965965965969969996596996777777777777777

57657657657657657657657657757657657675767 43434343434343443444

53853853853838538538538385353355 1515151515151515

440440440440440440444444444444444404440444 111111111111111

4704704704704704704704704747074704 4040404044040047047047047004044040400

4714714471717171144717714714 44444444444444444

55975975975975975975975597597597599 53535353535335353535353

10010010010010010000001001000010 79779779779779797997979797 4444444 293293293293993293293299293351515151555515 101101101101101101010010111110010010010010010010010001001000100000 8888888888

37637637673766376767 63636363364364364366464464595955995364364364364364364646466466 67676766676766763643643646463643643643643664443 7575757757575575573533533533533533533535335353353353353555394,9494,94,94,94,94,94,94,4,4,,94,, 353535355353 4024024024024024024022402402040 101101101101011011010620620620620620620 20620 666666666

107

Knobs and Pulls — Kitchen & Bath


01192018094345

Reveal

Gap

Cabi

net

Door

RevealCa

bine

t

Inset DoorDoor

Tab

Cup Diameter

Cup Depth

The Rockler Advantage:

• Limited lifetime warranty

• Expert guidance and tech support at 1-800-260-9663

• Step-by-step instructions

• A large selection of JIG IT® templates make installation a breeze

• Mounting plates are included

• Mounting screws are included

• Hinges are sold by the pair

Door mounting style: Overlay or Inset

Cup drilling

Door angle in open position

Full door clearance for

pullout shelves

Degree of opening

Number of hinges for door size, weight

3/16" Gap

Things to know when selecting European-style Concealed Hinges

Compact• Less expensive• Face frame only• 5mm minimum

gap between closed door and cabinet

Cabinet style: Face Frame or Frameless

Face Frame: Hinges mount to the frame

Frameless: Hinges mount to the cabinet

interior

Hinge type: Compact or Long-arm

Gap and reveal Reveal, inset doorz

40-48lbs.29-33

lbs.

13-20lbs.

9-11lbs.

2 3 4 5

Hinges per door

100"

80"

60"

40"

20"

Doo

r he

ight

Soft-close hinges have a damping mechanism that engages in the last few inches to produce a gentle close – no more slamming!

Soft close

Snap-close or Soft-close?

2-piece clip-on mounting

3-way adjustment

Overlay Inset3/8" Inset

InsetHalf Overlay

Full Overlay

Long-arm• Face frame and frameless• 2-piece clip-on mounting

allows easy door removal• 1mm minimum gap between

closed door and cabinet

More hinges and information at rockler.com/hardware/hinges

Zero-protrusion hinges

Up-Down

Left-Right

Front-Back

Face frame

Frameless

Cup depth varies by hinge, but most diameters are 35mm

Wh

Sel

1 I•••

2 F•

3 D• •

4 H•

5 I

JIG IT Easilydrill pa RochandhbasesSysteheighpositiand o(6899

JIG IT Set uperfealign JIG IT

108

Guide to Euro-style Cabinet Hinges

800-279-4441


01192018094931

eal

r

doorz

-48bs.

5

on

Why choose Euro-style Hinges? Fully concealed • 3-way adjustment • Limited lifetime warranty

Selecting the right Euro-style Hinge

1 Identify your door application• Standard cabinet door• Specialty door (such as lipped, mitered or thick door) • Specialty cabinet application (such as pie-cut corner cabinets)

2 For standard doors, what style are the cabinets?• Face frame • Frameless

3 Do you want compact or long-arm hinges?• Compact hinges are less expensive but work only on face frame cabinets• Long-arm hinges are available for either face frame or frameless cabinets and allow easy door removal

4 How far do you want the door to swing open?• Most standard hinges open 105°-120° so the door won't hit the wall or other doors. Special application hinges are available if a larger degree of opening is needed

5 Inset or overlay doors?

JIG IT® Concealed Hinge Drilling Guides Easily and accurately drill cup holes for European-style concealed hinges – without a drill press! Steel templates line up quickly with your marks on the door. Just install a Rockler Long-Shank Drill Bit (sold separately) in the bit guide, chuck it in your handheld drill, position the bit guide on the steel template and drill the hole. Clamp bases provide firm support directly under the drill bit. Deluxe Concealed Hinge Drilling System (53420) allows precise, repeatable hinge cup holes on doors of the same height. Includes a 36" rail, two cup templates, one bit guide and a stop block for positioning. Concealed Hinge Drilling Guide (56778) comes with one cup template and one bit guide for individual use. Euro-style hinges require a #6 Self-centering bit (68991) unless noted in the offer. Detailed instructions included.

The clamp bases lift the door for stability directly under the drill bit

53420

Make installation easy and accurate!

JIG IT® Mounting Plate Templates Drill perfectly positioned holes. Applicable JIG IT's are listed in individual hinge offers. Euro-style hinges use #6 self-centering bits unless noted in the offer.

JIG IT® Hinge Cup Jig Setup Guide Set up your drill press in seconds to bore perfect European hinge cup holes — just align your fence with the jig! Applicable JIG IT's are listed in hinge offers.

Rockler®/Insty-Drive Self-Centering Bits Make professional quality hinge installation a breeze – drill perfectly centered pilot holes every time! These self-centering bits feature hex shanks to prevent slipping. 69053 3-Pc. Set: #4, #6, #8 . . . . $ 29.99 68984 #4 Bit . . . . . . . . . . . . . . . . $ 12.99 68991 #6 Bit . . . . . . . . . . . . . . . . $ 12.99 68998 #8 Bit . . . . . . . . . . . . . . . . $ 12.99 69007 #10 Bit . . . . . . . . . . . . . . $ 12.99

25415 #4 Drills (2-Pack) . . . . . . . $ 4.99 23514 #6 Drills (2-Pack) . . . . . . . $ 4.99 22851 #8 Drills (2-Pack) . . . . . . . $ 4.99 21115 #10 Drills (2-Pack) . . . . . . $ 4.99

53420 JIG IT® Deluxe Concealed Hinge Drilling System . . . . . . . . . . . . . . . . .$ 119.99 56778 JIG IT® Concealed Hinge Drilling Guide . . . . . . . . . . . . . . . . . . . . . . . . . .$ 69.99 10117 Long Shank Carbide Forstner Bit , 35mm . . . . . . . . . . . . . . . . . . . . . . . .$ 39.99

1/4" shank Fits Insty-Driver

High speed steel bit

Euro-style Hinges

Standard Face Frame . . . . . . . . . . . . . . . . . . . 110-111

Standard Frameless . . . . . . . . . . . . . . . . . . . . . . . .112

Special Door Applications . . . . . . . . . . . . . . . . . . .113

Special Cabinet Applications. . . . . . . . . . . . . . . . .114

Semi-Concealed and Piano Hinges . . . . . . . . .115

No-Mortise Hinges . . . . . . . . . . . . . . . . . . . . . . . . .116

Special Application Hinges. . . . . . . . . . . . . . . . .117

Butt Hinges . . . . . . . . . . . . . . . . . . . . . . . . .rockler.com

56778

53420

109

Guide to Euro-style Cabinet Hinges

Rockler.com


01192018094932

Soft CloseSofSofSofSofoffS tttt t t t CCCCCCCCCloseSSSSooooSoft CloseSofSofSofSofoffS tttt t t CCCCCCCClosl eSSSSoooo

JIG IT 57706

• S• 3• F• T• F

General Hinge Information* Finish Tab Cup

Diameter Cup

DepthMinimum

Door ThicknessMaximum

Door Thickness Adjustments Gap Clip-on Minimum Reveal

Blum 110º Compact Nickel 3mm 35mm 11mm 16mm (.63") 19mm (.75") 2-Cam, 1-Slot 5mm No 7mm

Blum 105º Compact Nickel 3mm 35mm 11mm 16mm (.63") 19mm (.75") 2-Cam, 1-Slot 5mm No 7mm

Blum 110º Long Arm Nickel 5mm 35mm 13mm 16mm (.63") 26mm (1") 2-Cam, 1-Slot 1mm Clip .5mm

Blum 120º Long Arm Nickel 5mm 35mm 12.7mm 16mm (.63") 22mm (.86") 2-Cam, 1-Slot 1mm Clip 1.1mm

*Always check Rockler.com for detailed specifications by item number

S

S

S

S

Hinges 55902 3/8" Overlay . . . . . . . . $ 6.99 pr. 55910 1/2" Overlay . . . . . . . . $ 6.99 pr. 55918 3/4" Overlay . . . . . . . . $ 6.99 pr. 31329 11/4" Overlay . . . . . . . . $ 6.99 pr. 90788 Variable Overlay . . . . $ 7.99 pr.

Blum 120° Long Arm Hinges • Snap close• 3-way adjustability• Clip-on mounting• Hinge covers included• Face frame cabinets

Hinges 55926 3/8"-5/8" Overlay . . . $ 11.99 pr. 55933 1/2"-3/4" Overlay . . . $ 11.99 pr. 55941 Inset . . . . . . . . . . . . . . $ 14.99 pr.

Blum 110° Long Arm Hinges • Blumotion soft close• 3-way adjustability• Clip-on mounting• Hinge covers included• Face frame cabinets

Hinges 33600 3/8"-5/8" Overlay . . . $ 18.99 pr. 36778 1/2"-3/4" Overlay . . . $ 18.99 pr. 35676 Inset . . . . . . . . . . . . . . $ 19.99 pr.

Blum 110° Compact Hinges • Blumotion soft close• 3-way adjustability (43870 is 2-way)• Use #6 or #8 Self-Centering Bits• Caps included (except for 43870)• Face frame cabinets

Hinges 46526 3/8" Overlay . . . . . . . $ 11.99 pr. 46572 1/2" Overlay . . . . . . . $ 11.99 pr. 44308 3/4" Overlay . . . . . . . $ 11.99 pr. 46762 11/4" Overlay . . . . . . . $ 11.99 pr. 43870 Variable Overlay . . . $ 12.99 pr.

JIG IT® Installation Solutions 58009 Mounting Plate Jig C . . . . $ 8.99 53438 Cup Jig for Drill Press . . .$ 10.99

48224 Hinge Cup Spacers . . . . . . $ 6.99 47937 86° Restrictor Clips . . . . . . $ 5.99

Polyurethane Cushions Small cushions are 5/16" dia. x 1/16" thick and work with all snap closing hinges. The large, 1/2" dia. x 1/8" cushions are recommended for Blum’s face frame hinges. Pack of 25. 37931 Large . . . . . . . . .$ 3.99 31848 Small . . . . . . . . .$ 3.99

• S• 3• F• N• F

JIG IT 57706 53438

Blum 105° Compact Hinges • Snap close• 3-way adjustability (90788 is 2-way)• Use #6 or #8 Self-Centering Bits• Caps included (except for 90788)• Face frame cabinets

JIG IT® Installation Solutions 58009 Mounting Plate Jig C . . . . $ 8.99

JIG IT® Installation Solutions 57345 Mounting Plate Jig D . . . $ 8.99 58488 Cup Jig for Drill Press . . .$ 10.99

35245 Hinge Cup Spacer . . . . . . $ 2.99 57706 Inset Mounting Plate Jig B $ 8.99 31075 Restrictor Clips . . . . . . . . . $ 1.99

Zer

Zer

Salic

Salic

1/2” Overlay

1/2” Overlay 1/2” Overlay

1/2” Overlay

110ºOpening

Soft Close

105ºOpening 120º

Opening

110ºOpening

Soft Close

Easy, accurate installation – 3 ways! (See previous page)

Hinge Cup Drilling Jig with a handheld drill

Hinge Cup Setup Guide with a drill press

Mounting Plate Jig with a Rockler Self-Centering Bit

53438 Cup Jig for Drill Press . . .$ 10.99 JIG IT® Installation Solutions 57345 Mounting Plate Jig D . . . $ 8.99

58488 Cup Jig for Drill Press . . .$ 10.99 57706 Inset Mounting Plate Jig B $ 8.99 28631 973A , Soft Close Adapter $ 4.99

35mDrillDrill f 46524 46532

110 800-279-4441

Face Frame Hinges — 10% OFF 10+ Pair of the same European Hinge 10%


01192018095147

JIG IT® Installation Solutions 57706 Mounting Plate Jig B . . . . $ 8.99

Hinges 57582 3/8" Overlay . . . . . . . $ 15.99 pr. 59449 1/2" Overlay . . . . . . . $ 15.99 pr. 50975 3/4" Overlay . . . . . . . $ 15.99 pr. 55422 Inset . . . . . . . . . . . . . . $ 17.99 pr. JIG IT® Installation Solutions 54095 Mounting Plate Jig G for Overlay Hinges. . . . . . $ 8.99 58223 Cup Jig for Drill Press . . . $ 10.99

Salice 105° Long Arm Hinges • Silentia soft close• 3-way cam adjustability• Clip-on mounting• Nickel finish• Hinge covers included• Face frame cabinets

Hinges 58402 1/2" Overlay . . . . . . . . $ 7.99 pr. 51950 5/8" Overlay . . . . . . . . $ 7.99 pr. 55674 3/4" Overlay . . . . . . . . $ 7.99 pr. 55750 1" Overlay . . . . . . . . . . $ 7.99 pr. 57750 11/4" Overlay . . . . . . . . $ 7.99 pr.

• Snap close• 3-way cam adjustability• Full clearance for pullouts when open• Titanium finish• Face frame cabinets

um al

m

m


Diameter Cup

DepthMinimum



Salice 106º Compact Nickel 3mm 35mm 11mm 15mm (.59") 19mm (.75") 3-Way Cam 4.6mm No 8.3mm**

Salice 106º Compact Titanium 3mm 35mm 11mm 15mm (.59") 19mm (.75") 3-Way Cam 4.6mm No 8.3mm**

Salice 105º Long Arm Nickel 4mm 35mm 12mm 15mm (.59") 19mm (.75") 3-Way Cam 4.6mm Clip 1.5mm

Salice 105º Long Arm Titanium 4mm 35mm 12mm 15mm (.59") 19mm (.75") 3-Way Cam 4.6mm Clip 1.5mm

*Always check Rockler.com for detailed specifications by item number **5.2mm for 1" and larger overlays

9 pr. 9 pr. 9 pr.

9 pr. 9 pr. 9 pr.

FastCap Euro Door Stops for Inset Doors These clever stops keep self-closing hinges from pulling your inset doors inside the cabinet. Each is a compact plastic button with one screw. Simply rotate the stop until the door sits flush, then tighten. Screws included. 10-pack. 44544 Brown . . . . . . . . . . . . . $ 2.99 pk. 45201 White . . . . . . . . . . . . . . $ 2.99 pk.

ons dia. x h all arge, are face

$ 3.99 $ 3.99

Salice 105° Long Arm Hinges • Silentia soft close• 3-way cam adjustability• Clip-on mounting• Titanium finish• Hinge covers included• Face frame cabinets

Hinges 53171 3/8" Overlay . . . . . . . $ 16.99 pr. 56763 1/2" Overlay . . . . . . . $ 16.99 pr. 54219 3/4" Overlay . . . . . . . $ 16.99 pr. JIG IT® Installation Solutions 54095 Mounting Plate Jig G . . . $ 8.99 58223 Cup Jig for Drill Press . . $ 10.99

Hinges 33370 1/2" Overlay . . . . . . . . $ 6.99 pr. 35137 5/8" Overlay . . . . . . . . $ 6.99 pr. 36647 3/4" Overlay . . . . . . . . $ 6.99 pr. 38012 1" Overlay . . . . . . . . . . $ 6.99 pr. 32932 11/4" Overlay . . . . . . . . $ 6.99 pr. 33216 13/8" Overlay . . . . . . . . $ 6.99 pr. 33957 17/16" Overlay . . . . . . . $ 6.99 pr.

• Snap close• 3-way cam adjustability• Full clearance for pullouts when open• Nickel finish• Face frame cabinets

JIG IT® Installation Solutions 57706 Mounting Plate Jig B . . . . $ 8.99 53438 Cup Jig for Drill Press . . .$ 10.99

$ 2.99 $ 8.99 $ 1.99

Zero-protrusion Silentia Soft Close

Silentia Soft CloseZero-protrusion

Salice 106° Zero-Protrusion Compact Hinges

Salice 106° Zero-Protrusion Compact Hinges

53438 Cup Jig for Drill Press . . .$ 10.99

” ay

” ay

ºng

ºing

1/2” Overlay

1/2” Overlay

106ºOpening

106ºOpening

1/2” Overlay

105ºOpening

Soft close

1/2” Overlay

Soft Close

105ºOpening

0.99 $ 8.99 $ 4.99

35mm Hinge Cup Drill Press Forstner Bits Drill flat-bottomed holes. 3/8" shank. 46524 35mm HSS Bit . . . . . . . . . $ 19.99 46532 35mm Carbide Bit . . . . . $ 27.99

46532

35mm Hinge Hole Repair Kit Includes material to repair two hinge sets. 38119 Cherry Kit . . . . . . . . . . . . . $ 6.49 37977 Maple Kit . . . . . . . . . . . . . $ 6.49 34339 Oak Kit . . . . . . . . . . . . . . . $ 6.49

Hinge Dowel Repair Kit Firm up worn hinge screw holes, fix mistakes, or replace missing screws in a jiffy! Includes eight #6 x 1/2" dowel screws and eight 8mm plastic dowels. 46577 . . . . . . . . . . . . . . . . . . . . . . . $ 2.49

111

Face Frame Hinges —

Rockler.com

inge 10% OFF 10+ Pair of the same European Hinge


01192018095148


Diameter Cup

DepthMinimum



Blum 110º Long Arm Nickel 5mm 35mm 13mm 16mm (.63") 26mm (1") 3-Way Cam 1.5mm Clip 1.1mm

Blum 120º Long Arm Nickel 5mm 35mm 12.7mm 16mm (.63") 22mm (.86") 3-Way Cam 1.5mm Clip .5mm

Salice 105º Long Arm Nickel 4mm 35mm 12mm 15mm (.59") 19mm (.75") 3-Way Cam .7mm Clip 1.5mm

Salice 105º Long Arm Titanium 4mm 35mm 12mm 15mm (.59") 19mm (.75") 3-Way Cam .7mm Clip 1.5mm


Blum 120° Long Arm Hinges • Snap close• 3-way adjustability• Clip-on mounting• Nickel finish• Hinge covers included• Frameless cabinets

Hinges 55793 Full Overlay . . . . . . . . $ 10.99 pr. 55801 Half Overlay . . . . . . . $ 10.99 pr. 55809 Inset . . . . . . . . . . . . . . $ 14.99 pr.JIG IT® Installation Solutions 50375 Mounting Plate Jig A . . . $ 7.99 56585 Mounting Plate, Inset . . . $ 8.99 58488 Cup Jig for Drill Press . . $ 10.99

Salice 105° Long Arm Hinges • Silentia soft close• 3-way cam adjustability• Clip-on mounting• Nickel finish• Hinge covers included• Frameless cabinets


Salice 105° Long Arm Hinges • Silentia soft close• 3-way cam adjustability• Clip-on mounting• Titanium finish• Hinge covers included• Frameless cabinets


Blum 110° Long Arm Hinges • Blumotion soft close• 3-way adjustability• Clip-on mounting• Nickel finish• Hinge covers included• Frameless cabinets

Hinges 32894 Full Overlay . . . . . . . . $ 17.99 pr. 33603 Half Overlay . . . . . . . $ 17.99 pr. 34807 Inset . . . . . . . . . . . . . . $ 18.99 pr.JIG IT® Installation Solutions 50375 Mounting Plate Jig A . . . $ 7.99 56585 Mounting Plate, Inset . . . $ 8.99 58488 Cup Jig for Drill Press . . $ 10.99 35245 Hinge Cup Spacer . . . . . . $ 2.99

FullOverlay

FullOverlay

FullOverlay

FullOverlay

110ºOpeningSoft

Close

120ºOpening

105ºOpening

Soft Close

105ºOpening

Soft CloseSoft CloseSofSofSofSofoffSS tttt t t t CCCCCCCCCloseSSSSoooo Silentia Soft Close

Silentia Soft Close

Blumotion Soft-Close Adapter Ingenious functionality so doors can close gently and silently. Works with both full and partial overlay doors and doesn't require any change to the hinge assembly. 25756 $ 4.99 ea. $ 4.49 10 +

Blum Tip-On Push-to-Open Touch Latches for Self-Closing Hinges Just press gently on the door to open—no pulls or knobs required. To close, press door until plunger engages with barrel. Recommended for doors 10" wide and wider. 52491 Touch Latch (10mm Press-Fit), Gray . . . . . . . . . . . . . . $ 8.99 ea. $ 8.09 10 + 55452 Screw-Mount Adapter, Gray . . . . . . . . . . . . . . .$ 3.49 ea. $ 3.14 10 +

Touch Latch (52491)shown with optional Screw-Mount Adapter (55452)

Blum

Salic

90° SFace

• S• S• F• A

(• N

31952

95° F 57387 56118 51394

• S• 3• C

Blum

Sur

JIG IT Moun 58932 57706

112

Frameless Cabinet Hinges

800-279-4441

10% OFF 10+ Pair of the same European Hinge 10%


01192018095433

um al

m

m

m

m

9 pr.9 pr.9 pr.

$ 7.99 $ 8.99 0.99

9 pr.9 pr.9 pr.

$ 7.99 $ 8.99 0.99

ose

o nd h full s and ge to

9 10 +


Diameter Cup

DepthMinimum



Blum 95º Thick Door Hinge Nickel 5mm 35mm 12.7mm 19mm (.75") 30mm (1.18") 3-Way Cam 2.5mm Clip .4mm

Salice 110º 3/8"Rabbet Nickel 11mm 35mm 9mm 12.7mm (.5") 25mm (.98") 3-Way Cam .7mm Clip 1.5mm


270° Aximat Hinge • 2-way adjustment• 1/4" inside clearance• Overlay hinge surface mounts on the

cabinet and uses a 35mm mounting cup on doors

• Zinc die cast construction 20786 Black . . . . . . . . . . . . . $ 29.99 pr. 25931 Nickel . . . . . . . . . . . . . $ 29.99 pr.

175° Surface-Mount Frameless Hinge

• Self close• 3-way adjustability• Use for inset, full and half overlay

applications• Nickel finish

66613 . . . .$ 16.99 pr. . .$ 15.29 10 + pr.JIG IT® Installation Solutions 59459 Template for 66613 . . . . $ 10.99

90° Surface-Mount Frameless Hinge

• Snap close• Automatic spring action keeps door

either open or closed• For use on inset or overlay doors up

to 3/4" thick• Nickel finish

28845 . . . . . .$ 8.99 pr. . .$ 8.09 10 + pr.

90° Surface-Mount Face Frame Hinge

• Snap close• Side-to-side adjustability• For use on doors, 5/8" to 3/4" thick• Allows overlays from 1/2" to 5/8"

(depending on door thickness)• Nickel finish

31952 . . . . . .$ 8.99 pr. . .$ 8.09 10 + pr.

Salice 110° 3/8" Rabbeted Door Hinges • Easily add Euro hinges to your lipped

kitchen doors• Silentia soft close• 3-way cam adjustability• Clip-on mounting• Nickel finish

Hinges 52638 Face Frame Cabinets $ 44.99 pr. 56534 Frameless Cabinets . . $ 39.99 pr.JIG IT® Installation Solutions 50908 Mounting Plate Jig . . . . . $ 8.99 59029 Cup Jig for Drill Press . . . $ 9.99

95° Face Frame Thick Door Hinges 57387 1/2" Overlay . . . . . . . $ 16.99 pr. 56118 5/8" Overlay . . . . . . . $ 16.99 pr. 51394 Inset . . . . . . . . . . . . . . $ 18.99 pr.

95° Frameless Thick Door Hinges 55872 Half Overlay . . . . . . . $ 14.99 pr. 55864 Full Overlay . . . . . . . . $ 14.99 pr. 55879 Inset . . . . . . . . . . . . . . $ 16.99 pr.

• Snap close• 3-way cam adjustability• Clip-on mounting

Blum 95° Thick Door Hinges• For doors up to 13/16" thick• Nickel finish• Hinge covers included

Surface-Mount Hinge Applications 270° Zero-Protrusion Hinge

Door Closed

DoorCabinet

3/8” Overlay

DoorClosed

270ºOpening

110ºOpening

Soft Close

JIG IT® Installation Solutions Mounting Plate Jigs 58932 J for 57387 and 56118. . . $ 8.99 57706 B (Inset) for 51394 . . . . . . $ 8.99

NEW! Silentia Soft Close

50375 A for 55872 and 55864 . . $ 7.99 56585 (Inset) for 55879 . . . . . . . . $ 8.99 Hinge Cup Jig for Drill Press 58488 . . . . . . . . . . . . . . . . . . . . . . $ 10.99

113

Special Door Application Hinges

Rockler.com

inge 10% OFF 10+ Pair of the same European Hinge



SnapDeco Decor

• 1• S• P• O

32153 32163 32172 32181 26873 26631

DemRepl Instalthese

• 1• U• Id• S• R

For S 23347 26233

Snap • 1• S• 1

1/4" 32191 32202 32209 32217 29698 229801/2" 32226 32234 32244 32254 24823 28261


Diameter Cup

DepthMinimum



Blum Pie Corner Hinge Kit** Nickel 5mm 35mm 11mm 16mm (.63") 24mm (.94") 3-Way Cam 1mm Clip 0mm

Salice Pie Corner Hinge Kit Nickel 4mm 35mm 11mm 15mm (.59") 19mm (.75") 3-Way Cam .7mm Clip 1.5mm

Blum 155º Zero-Protrusion Nickel 5mm 35mm 11.7mm 16mm (.63") 24mm (.94") 3-Way Cam 1.5mm Clip 0mm

Blum 110º Cross Corner Nickel 5mm 35mm 13mm 16mm (.63") 19mm (.75") 3-Way Cam 1.5mm Clip 4mm

Blum 95º Blind Corner Nickel 5mm 35mm 13mm 16mm (.63") 24mm (.94") 3-Way Cam 1.5mm Clip .1mm

*Always check Rockler.com for detailed specifications by item number **For frameless cabinets

Salice 165° Pie Corner Hinge Kits • Snap close• 3-way cam adjustability

Hinges, Nickel 26845 Face Frame, 1/2" Overlay $ 35.99 27320 Face Frame, 3/4" Overlay $ 35.99 23140 Face Frame, 11/4" Overlay $ 35.99 28817 Frameless, Full Overlay . . $ 35.99

• Snap close• 3-way adjustability• Clip-on mounting• Nickel finish

Hinges 56399 Frameless, Full Overlay . . $ 42.99 59432 Frameless, Half Overlay . $ 42.99 50249 Frameless, Inset . . . . . . . . $ 44.99 54102 Face Frame, 1/2" Overlay $ 44.99 50487 Face Frame, 5/8" Overlay $ 44.99

JIG IT® Installation Solutions 50375 Mounting Plate Jig A

for Frameless . . . . . . . . . . . $ 7.99 58932 Mounting Plate Jig J

for Face Frame. . . . . . . . . . $ 8.99 57345 Mounting Plate Jig D . . . $ 8.99

Hinge 27325 Frameless, Full Overlay . . . . . . . . . . $ 21.99 pr. 56186 Face Frame, 5/8" Overlay . . . . . . . . $ 24.99 pr.JIG IT® Installation Solutions 58932 Mounting Plate Jig J , for Face Frame . $ 8.99 50375 Mounting Plate Jig A , for Frameless . . . $ 7.99 58488 Cup Jig for Drill Press . . . . . . . . . . . . . . $ 10.99

Hinge 55886 Frameless, Cross-Corner . . . . . . . . . $ 19.99 pr.JIG IT® Installation Solutions 50375 Mounting Plate Jig A . . . . . . . . . . . . . . . $ 7.99 58488 Cup Jig for Drill Press . . . . . . . . . . . . . . $ 10.99

Hinge 55894 Blind-Corner Hinges . . . . . . . . . . . . $ 19.99 pr.JIG IT® Installation Solutions 50375 Mounting Plate Jig A . . . . . . . . . . . . . . . $ 7.99 58488 Cup Jig for Drill Press . . . . . . . . . . . . . . $ 10.99

Blum 155° Zero Protrusion Hinges

• Full door clearance for pullouts

• Snap close• 3-way cam adjustability• Clip-on mounting

Blum 110° Cross Corner Hinges

• Snap close• 3-way cam adjustability• For 45° cabinets• Clip-on mounting• Hinge covers included• Frameless

Blum 95° Blind Corner Hinges

• Snap close• 3-way cam

adjustability• Clip-on mounting• Hinge covers included• Nickel finish

Zero-protrusion

Blum 170° Pie Corner Hinge Kits

JIG IT® Installation Solutions 50375 Mounting Plate Jig A . . . $ 7.99 55909 Mounting Plate Jig E . . . $ 8.99 58223 Cup Jig for Drill Press . . $ 10.99

Full Overlay

Closed

Open

155ºOpening

Full Door Clearance

for Pullouts

45º Cross Corner

110ºOpening

Inset

95ºOpening

All kits use 50375 for bi-fold hinge. Face Frame Kits also use 57345; Inset Kit also uses 56585

56585 Mounting Plate, Inset . . . . .$ 8.99 58488 Cup Jig for Drill Press . . . $ 10.99 Note: Face-Frame hinges (1/2" Overlay,

3/4" Overlay and 11⁄4" Overlay) use Mounting Plate Jig E. Frameless Full Overlay hinges use Mounting Plate Jig A for the cabinet and Jig E for the door.

• Clip-on mounting• Nickel or Titanium finish

Hinges, Titanium 56511 Face Frame, 1/2" Overlay $ 39.99 57776 Face Frame, 3/4" Overlay $ 39.99 59313 Frameless, Full Overlay . . $ 39.99

114

Special Cabinet Applications

800-279-4441

10% OFF 10+ Pair of the same European Hinge



A

Snap-Closing Variable Overlay Decorative Hinges Replace old, worn-out hinges with affordable, easy-to-install hinges!

• 180° opening• Automatically snap closes at 45°• Plated steel for durability• Overall height is 23/4"

Pair 10 + Pair 32261 Polished Brass . . $ 3.99 . . .$ 3.59 32271 Antique Brass . . $ 4.49 . . .$ 4.04 32281 White . . . . . . . . . $ 4.49 . . .$ 4.04 32291 Chrome . . . . . . . $ 4.49 . . .$ 4.04 29593 Oil Rub. Bronze $ 4.49 . . .$ 4.04 27022 Satin Nickel . . . . $ 4.49 . . .$ 4.04

cabinet

door

Snap-Closing 3/8" Inset Hinges A perfect low-profile hinge to replace worn-out kitchen or bath cabinet hinges!

• 180° opening• Snap-close• Only the 2" long barrel shows• Use on doors with a 3/8" lip• No catch required

Pair 10 + Pair 32112 Polished Brass . . $ 2.99 . . $ 2.69 32122 Antique Brass . . $ 2.99 . . $ 2.69 32131 White . . . . . . . . . $ 3.49 . . $ 3.14 32142 Chrome . . . . . . . $ 2.99 . . $ 2.69 27407 Oil Rub. Bronze $ 3.99 . . $ 3.59 25827 Satin Nickel . . . . $ 3.99 . . $ 3.59

cabinet

door

Snap Closing 3/8" Inset Decorative Hinges Decorative hinge comes in multiple finishes!

• 180° opening• Snap close• Plated steel for durability• Overall height is 23/4"

Pair 10 + Pair 32153 Polished Brass . . $ 3.49 . . $ 3.14 32163 Antique Brass . . $ 3.49 . . $ 3.14 32172 White . . . . . . . . . $ 3.49 . . $ 3.14 32181 Chrome . . . . . . . $ 3.49 . . $ 3.14 26873 Oil Rub. Bronze $ 3.99 . . $ 3.59 26631 Satin Nickel . . . . $ 3.99 . . $ 3.59

door

cabinet

Slotted holes

Hinge styles for supporting large doorsContinuous hinges, also known as piano hinges, offer load bearing points from end to end, making them ideal for heavier doors. Choose from a variety of finishes, and enjoy the exclusive Rockler Advantage: easy, accurate installation thanks to slotted holes on each end!

E. Partial Wrap-Around Slotted Piano Hinges

• Screws directly into face for strength• Includes slots for simple final fitting• Use on 3/4" material• 48" L Each 10 +

19423 Brass Plated . . . . .$ 29.99 $ 26.99

For Lids

Lid

For Doors

Door

A. Nickel-Plated Width Length Each 10 + 37750 . . 11⁄16" . 36" . .$ 15.99 . . .$ 14.39 ★ 33305 11⁄16" . 72" .$ 22.99 . . .$ 20.69 30085 . . .11⁄2". . 36" . .$ 16.99 . . .$ 15.29 ★ 39170 .11⁄2". . 72" . .$ 24.99 . . .$ 22.49

B. Charcoal Gray – Powder Coated Width Length Each 10 + 34938 . . .11⁄2". . 36" . .$ 19.99 . . .$ 17.99 ★ 32592 .11⁄2". . 72" . .$ 49.99 . . . . . . NA

C. Brass-Plated Width Length Each 10 + 19241 . . 11⁄16" . 36" . .$ 15.99 . . .$ 14.39 19259 . . 11⁄16" . 48" . .$ 16.99 . . .$ 15.29 19283 . . .11⁄2". . 36" . .$ 15.99 . . .$ 14.39 19291 . . .11⁄2". . 48" . .$ 19.99 . . .$ 17.99 19308 . . .11⁄2". . 60" . .$ 22.99 . . .$ 20.69 ★ 19316 .11⁄2". . 72" . .$ 24.99 . . .$ 22.49

Slotted Piano Hinges - Unique Finishes Slotted piano hinges provide accurate alignment. Plated steel except where noted. Includes screws.

• 180° opening• Slotted holes allow for easy and

precise adjustments• Screws included

For Double 1/4" Overlay Doors: 21544 Oil Rubbed Bronze . . $ 9.99 pr. 24697 Burnished Brass . . . . . $ 7.99 pr.For Double 1/2" Overlay Doors: 23084 Burnished Brass . . . . . $ 7.99 pr.

Demountable Double and Single Replacement Hinges Installation is easy and accurate with these two-way adjustable hinges!

• 180° opening• Up/down screw adjustment• Ideal for face frame cabinets • Self-closing• Replaces hard-to-find broken hinges

For Single 1/2" Overlay Doors: 23347 Satin Nickel . . . . . . . . . $ 8.99 pr. 26233 Oil Rubbed Bronze . . $ 8.99 pr.

Items with a star ★ are oversize packages and special charges apply.

Semi-Concealed Hinges Continuous Hinges

Rockler®/Insty-Drive Self-Centering Bits Make professional quality hinge installation a breeze – drill perfectly centered pilot holes every time! These self-centering bits feature hex shanks to prevent slipping. 69053 3-Pc. Set: #4, #6, #8 . . . . .$ 29.99 68984 #4 Bit . . . . . . . . . . . . . . . . .$ 12.99 68991 #6 Bit . . . . . . . . . . . . . . . . .$ 12.99

3/8" Inset Urn-Tipped Hinges Slotted screws make for accurate adjustments in an easy-to-install hinge!

• Free swinging• Plated steel for durability• Fixed pin• 31/8" barrel

Snap-Closing Overlay Hinges • 180° opening• Snap close• 1/4" or 1/2" overlays

1/4" Overlay Pair 10 + Pair 32191 Polished Brass . . $ 2.99 . . .$ 2.69 32202 Antique Brass . . $ 2.99 . . .$ 2.69 32209 White . . . . . . . . . $ 3.49 . . .$ 3.14 32217 Chrome . . . . . . . $ 3.49 . . .$ 3.14 29698 Oil Rub. Bronze . $ 3.99 . . .$ 3.59 22980 Satin Nickel . . . . $ 3.99 . . .$ 3.59 1/2" Overlay Pair 10 + Pair 32226 Polished Brass . . $ 2.99 . . .$ 2.69 32234 Antique Brass . . $ 2.99 . . .$ 2.69 32244 White . . . . . . . . . $ 2.99 . . .$ 2.69 32254 Chrome . . . . . . . $ 3.49 . . .$ 3.14 24823 Oil Rub. Bronze . $ 3.49 . . .$ 3.14 28261 Satin Nickel . . . . $ 3.49 . . .$ 3.14

door

cabinet

um al

m

m

m

m

m

99 pr.

$ 7.99 10.99

rlay,

l Jig

door.

35473 Urn TipDark Antique Brass

39.99 39.99 39.99

26233

Pair 10 + Pair 35525 Antique Brass $ 9.99 . . .$ 8.99 35473 Dark Antique Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 9.99 . . .$ 8.99

D. Stainless Steel Width Length Each 10 + 32611 . . 11⁄16" . 36" . .$ 19.99 . . .$ 17.99 ★ 34943 11⁄16" . 72" . .$ 29.99 . . .$ 26.99 36843 . . .11⁄2". . 36" . .$ 24.99 . . .$ 22.49 ★ 33958 .11⁄2". . 72" . .$ 34.99 . . .$ 31.49

B

C

D

E

115

Semi-Concealed/Continuous Hinges

Rockler.com

inge


01192018095719

Oil Rubbed Flat Wrought Satin Sterling Dark Ant. Antique Polished Bronze Black Iron Nickel Nickel Brass Brass Brass

A face frame hinge with exceptional strength that requires no mortising.

• 180° opening• Free swinging• For 3/4" thick doors• Brass plated steel

Urn Tip 23⁄4" barrel. Pair 31183 Polished Brass . . . . . . . . . . $ 9.99 31209 Antique Brass . . . . . . . . . . $ 9.99 31222 Dark Ant. Brass . . . . . . . . $ 9.99 31235 Sterling Nickel . . . . . . . . . $ 9.99 31248 Wrought Iron . . . . . . . . . . $ 9.99 20392 Flat Black . . . . . . . . . . . . . $ 9.99

No-Mortise Full Back-to-Back Wrap-Around Inset Hinges

31183 Urn Tip Polished Brass

23981 Ball TipOil Rub Bronze

Ball Tip 27⁄16" barrel. Pair 31300 Antique Brass . . . . . . . . . . $ 9.99 31313 Dark Ant. Brass . . . . . . . . $ 9.99 31326 Sterling Nickel . . . . . . . . . $ 8.99 31339 Wrought Iron . . . . . . . . . . $ 9.99 29295 Flat Black . . . . . . . . . . . . $ 10.99 23981 Oil Rub Bronze . . . . . . . . . $ 9.99 27505 Satin Nickel . . . . . . . . . . . . $ 9.99

No-Mortise Partial Wrap-Around Inset Hinges

49393 Flat Tip Satin Nickel

31456 Ball Tip Polished Brass

Urn Tip 23⁄4" barrel. Pair 31365 Polished Brass . . . . . . . . . . $ 9.99 31391 Antique Brass . . . . . . . . . . $ 9.99 31417 Sterling Nickel . . . . . . . . . $ 9.99 31430 Wrought Iron . . . . . . . . . . $ 9.99 28751 Flat Black . . . . . . . . . . . . $ 10.99 25770 Oil Rub Bronze . . . . . . . . $ 10.99 20657 Satin Nickel . . . . . . . . . . . . $ 9.99

Ball Tip 27⁄16" barrel. Pair 31495 Dark Ant. Brass . . . . . . . . $ 8.99 31521 Wrought Iron . . . . . . . . . . $ 8.99 27290 Flat Black . . . . . . . . . . . . . $ 9.99 24720 Oil Rub Bronze . . . . . . . . . $ 9.99 27863 Satin Nickel . . . . . . . . . . . . $ 9.99 Flat Tip 13⁄4" barrel. 49393 Satin Nickel . . . . . . . . . . . . $ 9.99

For inset doors on frameless or face frame cabinets. • 180° opening• Provides solid support for heavy doors• Large mounting surface area improves

stability

• Use on flush 3/4" thick inset doors• 23/4" barrel with urn tip

28751 Urn Tip Flat Black

Need help? Show us a picture!Use your cellphone or digital camera to send us a picture of a specific problem you want to solve. Email the picture to

our Tech Services Department: [email protected], along with any questions or bring your images along to any of our retail stores. We'll try to answer your questions as soon as possible.

25741

270° No-Mortise Overlay Hinges Perfect for entertainment centers, cabinets with pullout shelves, or any application requiring open doors to stay out of the way!

• 270° opening• Easy installation; no mortising

necessary• 2" tall hinges are made of heavy-

duty steel for use on 3/4" stock

Pair 31031 Antique English . . . . . . . $ 8.99 27944 Oil Rubbed Bronze . . . . . $ 8.99 38303 Satin Nickel . . . . . . . . . . . $ 8.99 15455 Statuary Bronze . . . . . . . . $ 8.99 25741 Polished Brass . . . . . . . . . . $ 8.99

45509 4714847658

3" No-Mortise Hinges for Shutters With beefy hinge leaves designed to accept 11/8" stock and larger, these are the ideal hinges to swing your custom window shutters. Removable pin makes it easy to remove your shutters or doors for cleaning. Includes matching screws. Butt Pair 44960 Satin Nickel . . . . . . . . . . . $ 6.49 47658 Oil Rubbed Bronze . . . . . $ 6.49 43988 White . . . . . . . . . . . . . . . . $ 6.49

Wrap-Around Pair 45509 Satin Nickel . . . . . . . . . . . $ 6.49 43694 Oil Rubbed Bronze . . . . . $ 6.49 47148 White . . . . . . . . . . . . . . . . $ 6.49

Statuary Bronze – Flat Tip A B C Pair 28670 . . 11/16" . . 7/8". . . . 11⁄2" . .$ 2.99 28688 . . 11/16" . . 7/8". . . . 2" . . .$ 3.99 28696 . . . 3/4" . . 15/16". . . 21⁄2" . .$ 3.99 28704 . . 13/16" . . 11⁄8". . . . 3" . . .$ 4.99 Statuary Bronze – Urn Tip 90432 . .11/16" . . 7/8" . . . 21⁄2" . . .$ 5.49 90437 . .11/16" . . 7/8" . . . . 3". . . .$ 5.99 90442 . . .3/4" . . 15/16" . . 31⁄2" . . .$ 6.99 90447 . .13/16" . . 11⁄8" . . . 41⁄4" . . .$ 7.99

Polished Brass Plated – Flat Tip A B C Pair 28712 . . 11/16" . . 7/8" . . . .11⁄2". . .$ 3.99 28720 . . 11/16" . . 7/8" . . . . 2" . . .$ 2.99 28738 . . . 3/4" . . 15/16" . . .21⁄2". . .$ 3.99 Polished Brass Plated – Urn Tip 90434 . . 11/16" . . 7/8" . . . 21⁄2" . . .$ 4.99 90439 . . 11/16" . . 7/8" . . . . 3". . . .$ 5.99 90444 . . . 3/4" . . 15/16" . . 31⁄2" . . .$ 5.49 90450 . . 13/16" . . 11⁄8" . . . 41⁄4" . . .$ 6.49

Beautiful, affordable plated steel

90434 Polished Brass, Urn Tip

Polished Brass

StatuaryBronze

No-Mortise Hinges Affordable plated steel hinges are beautiful and easy to install!

• 180° opening• Free swinging• Plated steel for durability

• Mount one leaf to the cabinet, the other to the door or lid

• Fixed pins

31031

Roto Ideal pivotis needrill tMadea mapcente 36244 36251 36269

Lid-S Similahingestay ono adprojecmoreFits 3of hinof supmanyformulbs. FSatin 44474 47545 43998 46252 46733 46591 44283Rusti 48519 31891 34899 34353 37327 31396 36275

Reve Can binset

• 1• O

i• S

29710

FHHBro

116

No-Mortise Hinges

800-279-4441

10% OFF 10 Pair of the same Hinge 10%



Pair$ 9.99 $ 9.99 $ 8.99 $ 9.99 10.99 $ 9.99 $ 9.99

f

l

Pair$ 3.99 $ 2.99 $ 3.99

$ 4.99 $ 5.99 $ 5.49 $ 6.49

the

Invisible Link 180° Hinges Ideal for inset doors. Fully concealed! For 3/4" thick material. Satin brass finish. 28852 . . . . $ 22.99 pr. $ 20.69 10 + pr.

• 180° opening • Hinges are 3/8" wide x 1" long • Requires a mortise (Jigs available) • For use in material at least 1/2" thick • Includes instructions and paper

installation template

Concealed Soss Hinges Ideal for jewelry boxes or other projects that call for a flush door and a small concealed hinge. Wing measurements are stated followed by the minimum stock thickness recommended.

Soss Routing Jig Makes installation of Soss hinges easy and accurate, eliminating all guesswork! 83600 For 26518, 30664 and 35294 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 37.99 83593 For 26526, 30671 and 36991 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 37.99 83585 For 26287 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 37.99

Satin Brass Finish Width Length For 37428 . .3/8". . 1" . . 1/2" . . $ 24.99 pr. 26518 . .3/8". 111⁄16" . 1/2" . . $ 29.99 pr. 26526 . . 1/2". .23⁄8". . 3/4" . . $ 36.99 pr. 26287 . . 1" . .45⁄8". . 13⁄8" . .$ 45.99 ea.Black Finish 30664 . .3/8". 111⁄16" . 1/2" . $ 37.99 pr. 30671 . . 1/2". .23⁄8". . 3/4" . .$ 40.99 pr.Satin Nickel Finish Width Length For 35294 . .3/8" 111⁄16" . 1/2" . .$ 40.99 pr. 36991 . .1/2". 23⁄8" . . 3/4" . .$ 45.99 pr.

3529430671

37428

No-Mortise Flange Hinge • 195° opening• Surface mount leaves 1/16" gap• Wrap-around flanges for solid support• Brass-plated steel• Use on 3/4" material

28746 . . . . . . . $ 7.99 pr. $ 7.19 10 + pr.

28100

2814224640

Snap Closing Semi-Concealed Hinges Easy-to-cut groove installation for a wide variety of cabinetry, boxes and furniture.

• Solid steel hinges mount easily to frameless or face-frame cabinetry• Semi-concealed hinge• Spring-action, snap close mechanism opens and closes smoothly and quietly• For use on 3/4" to 1" thick doors

For 1/4" Overlay Doors (#5) Pair 10 + 28100 Nickel . . . . . . . . . . . .$ 4.99 $ 4.49 28142 Antique Brass . . . .$ 4.99 $ 4.49

For 3/8" Inset Doors (#4) Pair 10 + 28126 Nickel . . . . . . . . . . . .$ 4.99 $ 4.49 28159 Antique Brass . . . .$ 4.99 $ 4.49 24640 Oil-Rubbed Bronze $ 4.99 $ 4.49

“ Perfect replacement. Did not know these hinges were available. Cabinet doors work like new. Excellent turnaround on shipping. ”

Roto Hinges Ideal where pivoting action is needed for indoor applications. Simply drill two holes to install Roto hinges. Made with zinc plated steel rivets and a maple cylinder for durability. Self-centering and self-spacing. Pair 10 + Pair 36244 3/8" . . . . . .$ 6.49 . . . . . . $ 5.84 36251 1/2" . . . . . .$ 6.99 . . . . . . $ 6.29 36269 3/4" . . . . . .$ 7.99 . . . . . . $ 7.19

Double Action Hinges Swings doors two ways. Great for shutters, screens, bar doors or any area with a lot of in and out traffic. Brass plated steel. Use on 3/4" or 11/8" stock. 29033 3/4" stock; 13/4"L . . . . $ 5.99 pr. 29041 11/8" stock; 2"L . . . . $ 10.99 pr.

Lid-Stay Torsion Hinges Similar to hinges on laptop computers, these cast-zinc hinges allow virtually any size lid to open smoothly, stay open and close easily - all with little effort and no additional hardware! Finishes will complement any project - from chests and boxes to storage units and more! Torsion mechanism is tested to 25,000 cycles. Fits 3/4” stock. Choose a symmetrical combination of hinges that provides approximately that amount of support. Use the formula shown to determine how many hinges you need. Patented. Use the following formula to determine how many hinges you need: Inch/lbs. Formula = (Lid Weight x Front-to-Back Size) ÷ 2 Satin Nickel: 44474 15 Inch-Pound . . . . $ 34.99 ea. 47545 30 Inch-Pound . . . . $ 34.99 ea. 43998 40 Inch-Pound . . . . . $ 34.99 ea. 46252 60 Inch-Pound . . . . . $ 34.99 ea. 46733 30 Inch-Pound . . . . . $ 59.99 pr. 46591 40 Inch-Pound . . . . . $ 59.99 pr. 44283 60 Inch-Pound . . . . . $ 59.99 pr.Rustic Bronze: 48519 15 Inch-Pound . . . . . $ 34.99 ea. 31891 30 Inch-Pound . . . . . $ 34.99 ea. 34899 40 Inch-Pound . . . . . $ 34.99 ea. 34353 60 Inch-Pound . . . . .$ 34.99 ea. 37327 30 Inch-Pound . . . . . $ 59.99 pr. 31396 40 Inch-Pound . . . . . $ 59.99 pr. 36275 60 Inch-Pound . . . . . $ 59.99 pr.

31⁄8"

21⁄16"

JIG IT® Lid-Stay Torsion Hinge Template Drill perfectly-spaced pilot holes in seconds. 23625 Lid-Stay JIG IT . . . . . . . . $ 11.99 68991 #6 Self-centering Bit . . . $ 12.99

Reversible Knife Hinges Can be used for full inset or side overlay inset doors.

• 180° opening• Only the pivot points show when

installed• Steel with a statuary bronze finish

29710 27/8" . . . $ 9.99 pr. .$ 8.99 10 + pr.

Find more in Project Hardware, Table Hardware, Chair Building and at rockler.com

117

Special Application Hinges

Hinge 10% OFF 10 Pair of the same Hinge


01192018123040

Dra

Sid

•••••

Bu1

2

3

47271Horizontal

47279Vertical 47287

Universal47295

DoubleDoor

47302 Double Door/offset

Lock Styles 47271 Cam Lock - Horizontal . . . . . . . . . . $ 8.99 47279 Cam Lock - Vertical . . . . . . . . . . . . $ 9.99 47287 Universal Cam Body . . . . . . . . . . . . $ 9.99 47295 Double - Standard Cam . . . . . . . $ 14.99 47302 Double - Offset Cam . . . . . . . . . . $ 14.99 Snap-In Locks with Keys (includes bezel) 48989 ss Snap-in lock plug, Key #1 . . . . . $ 7.99 48997 ss Snap-in lock plug, Key #2 . . . . . $ 7.99

Old English

Polished Brass

BlackStatuary Bronze

Five different lock style applications to choose from!

47302 Dbl/offset

Choose from five lock styles and six finishes — 30 combinations! — all of which workwith a single key.

Step 1 — Pick your lock styleChoose the proper style for your application: the Horizontal Cam Lock for drawers; the Vertical Cam Lock for cabinet door applications; the Universal Cam Lock (adjustable) for varying wood thicknesses; the Double Door Lock with or without offset cam.

Step 2 — Pick your key #Keyed alike or keyed different, the choice is yours! To have your locks keyed alike, choose the same key number for all your locks. If you want your locks keyed differently, choose a mix of keys.

Step 3 — Pick your finishPick your lock finish (at left).

Use the same key for multiple locks, or mix and match lock styles!

Bezel (included)

Lock Style

Snap-in lock and

key

One key can open five different lock styles!

Lock finishes

Satin Nickel

Polished Nickel

CompX Self-Locking SlamCam Conversion Kit for Cam Locks Adds spring-loaded latch and self-locking feature to any of our 13/16" and 13/4" Long Cylinder Locks (e.g. #99003 and #99079, sold separately). With SlamCam installed, putting the key into the lock makes it behave much like an entry door. Open the door by turning the "knob" (the key). Close the door, and the spring-loaded latch automatically engages. To secure the lock, just remove the key. Easy operation makes it more likely that sensitive cabinets will stay safely locked, and you don't have to worry about the cam crashing into the cabinet face. Made in USA. 54743 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 9.99

1/4 Turn Back Mount Cam Lock Perfect for narrow vertical rails. The fixed mounting plate won't rotate or shift. Mounts for either right or left applications. Offers three setbacks (1/32", 9/32" and 15/32"). For use on 3/4" stock. Keyed alike. 35974 . . . . . . . . . . . . . . . . . . . . . . $ 16.99

13/16" Long Cylinder Lock For 3/4" stock. Keyed Alike Different Brass . . . . . . . . . 99011 . . . . . . . . . 99029 Antique Brass . 99037 . . . . . . . . . 99045 Nickel . . . . . . . . 98998 . . . . . . . . . 99003 Price . . . . . . . . . . . . . . . . . . . . $ 18.99 ea. 13/4" Long Cylinder Lock For 11/2" stock. Keyed Alike Different Brass . . . . . . . . . . 99079 . . . . . . . . . . 99087 Antique Brass . . 99095 . . . . . . . . . . 99102 Nickel . . . . . . . . . 99053 . . . . . . . . . . 99061 Price . . . . . . . . . . . . . . . . . . . . $ 18.99 ea.

Cam Locks Two cams are provided — one straight for lipped applications and one formed for flush or overlay applications. Plated finishes.

Universal Cam Lock Adjusts for varying thicknesses. Mounting bracket adjusts for 3/4" to 13/8" thick panels. Offers three setbacks (1/32", 9/32" and 15/32"). Back mounting design. Keyed alike. 35982 . . . . . . . . . . . . . . . . . . . . . .$ 17.99

Cupboard Surface Mounted Lock Ideal for china cabinets, wardrobes and other inset doors. Brass-plated steel. 15/8" H x 1" W x 3/8" thick overall. Keyed alike. 26120 Cupboard Lock . . . . . . . . . $ 9.99

Rolltop Desk Surface Mounted Lock Features a mortised strike plate. Also works great for sliding cupboard doors. Measures 15/8" x 15/8". 3/4" boring required for cylinder. Screws not included. Strike plate requires a 1" L x 5/8" D x 3/8" W mortise. For use on 3/4"to 7/8" thick stock. Two keys provided. Keyed alike. 15017 Lock . . . . . . . . . . . . . $ 19.99 ea. 27048 Replacement Key . . . . $ 4.99 ea.

Surface Mounted Pin Tumbler Locks Using pins instead of discs makes it more difficult to break into drawers. Requires 7/8" diameter boring. Use on 3/4" to 15/16" stock. Bolt has 3/4" throw. Two keys and a strike plate are provided. Keyed alike. Each 17790 Drawer Lock . . . . . . . . . . $ 34.99 17782 Door Lock (right or left) $ 34.99

Surface Mounted Brass-Plated Lock 19/16" x 19/16" overall. Requires 3/4"boring. Screws not included. Two keys provided. For use on 3/4" stock. Keyed alike. 14879 Lock . . . . . . . . . . . . . . $ 15.99 ea. 27048 Replacement Key . . . $ 4.99 ea.

ONLINE VIDEO!

Tot-Lok Magnetic Key and Lock Without the magnetic key, no one can open the door lock – especially good for keeping children out of cabinets. Completely hidden from the outside of the cabinet. Comes with a template for easy installation. For doors 1/2" to 11/8" thick. Locking mechanism includes latch and catch. Magnetic Key sold separately. 63164 Locking Mechanism . . $ 8.99 pk. 63172 Magnetic Key . . . . . . . . . . .$ 8.99

118

Locks and Keys

800-279-4441



Drawers

Side Mount

Files

Under Mount (Concealed)

PantriesShelves

Center Mount

• Unconditional limited lifetime warranty*• Rockler's best slide for your best results• Rockler exclusive• Durable, premium steel• ISO certified at 50,000 cycles

• Smooth, quiet operation• Includes screws and instructions• Technical assistance for selection

advice and installation support * www.rockler.com/warranty

Buyer’s Guide for Slides:1 Select your application:

2 Select your mounting method

3 Select the extension 4 Select the motion options 5 Select from three options

3/4 EXTENSION

FULL EXTENSION

OVER TRAVEL

3/4 EXTENSION

75 lb.

• Standard• Soft-close • Push-to-open

• Weight — load rating• Length • Finish

Look for these symbols: easy-to-read weight and extension information

Dynamic weight rating: This is the load a set of slides can be expected to carry without failing over the course of a given number of open-and-close cycles, often 50,000.

Push-to-open

Slide SelectionNext 6 pages

Drawer Slides

es —

t

the cam.

is ose you a

on

are Each

34.99 34.99

ring. d. For

9 ea.9 ea.

net.

thick. nd . 9 pk.$ 8.99

119

Drawer Slides

rockler.com



3/4 Extension Full Extension Over Travel

Side Mount

Blum Epoxy-coated

Quiet, smooth and low-profile (only 7/8"). Heavy-gauge steel coated with easy-to-clean epoxy. Drawers extend 4" less than their overall length.

Centerline Lifetime Low Profile Series 766

Drawer and Cabinet Guidelines

Centerline Lifetime 766

Blum Epoxy-coated


Centerline Lifetime 757-SC

Centerline Lifetime 757-P


Centerline757-CCC

Maximum drawer side thickness No limit No limit No limit No limit No limit No limit No limitRequired side clearance (each side) 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"Required drawer bottom recess None None None None None None NoneFor face-frame or frameless cabinets? Both Both Both Both Frameless Both BothMinimum face-frame cabinet depth with rear brackets Length of slide Slide + 1" Length of slide Length of slide Length of slide Length of slide Length of slide

3/4 EXTENSION

75 lb.

3/4 EXTENSION

100 lb.

White finish Length Pair 5 + Pair 34827 12" $ 5.49 . . . $ 4.94 34835 14" $ 6.49 . . . $ 5.84 34843 16" $ 6.99 . . . $ 6.29 34850 18" $ 7.99 . . . $ 7.19 34868 20" $ 7.99 . . . $ 7.19 34876 22" $ 7.99 . . . $ 7.19

White finish, bulk (25 pair per case, screws not included) Length Case 40478 16" . . . . .$ 124.99 40486 18" . . . . .$ 129.99 40494 20" . . . . .$ 134.99 40551 22" . . . . .$ 144.99

• Standard motion • Side mount• Lever disconnect• Non-handed

• Self-closing motion• Side mount• Manual disconnect• Handed

Brown finish Length Pair 5 + Pair 34959 . . . . . . . . . . 20" . . . . . . . . $ 7.99 . . . . . . . . $ 7.19 71647 Rear brackets, 1"-27⁄16" Depth . . . . . . . . . $ 4.99

71647 Rear brackets (add 1"-27⁄16" depth) . . . . $ 4.99

Bulk Screw Pack 400 screws — enough to install a case of slides. 52532 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.99

Centerline Lifetime Series 757

Ideal for heavy everyday use, these slides feature 1" of travel past full extension, easy drawer removal and closed-position hold-in.

Zinc finish Length Pair 5 + Pair 45859 12" $ 9.99 . . $ 8.99 44506 14" $ 11.99 $ 10.79 48469 16" $ 12.99 $ 11.69 48022 18" $ 13.99 $ 12.59

Length Pair 5 + Pair 47758 20" $ 14.99 $ 13.49 47467 22" $ 15.99 $ 14.39 48260 24" $ 16.99 $ 15.29 49552 26" $ 17.99 $ 16.19

Centerline Lifetime Low Profile Series 3612

Quiet action and a low-profile design make this a classic for kitchen drawers. Features closed-position hold-in.

45680 Rear brackets (add 0"-13⁄8" depth) . . . . .$ 5.49



75 lb.

FULL EXTENSION

Centerline Lifetime Series 757-SC

Spring-action mechanism automatically guides drawers closed and prevents unwanted opening. Similar features as Series 757. Zinc finish Length Pair 5 + Pair 45908 16" $ 16.99 $ 15.29 49226 18" $ 17.99 $ 16.19 47585 Rear brackets (add 0"-13⁄8" depth) . . . . . $ 5.49

100 lb.

FULL EXTENSION

• Self-closing motion • Side mount• Lever disconnect• Non-handed

Length Pair 5 + Pair 44437 20" $ 18.99 $ 17.09 48607 22" $ 19.99 $ 17.99

Centerline Liftetime Series 757-P

A slight push to the front opens the drawer enough for you fully extend it – with no need for pulls or knobs. Great for the sleek, modern kitchen or in tight spots. Zinc finish Length Pair 5 + Pair 47849 16" $ 16.99 $ 15.29 45196 18" $ 17.99 $ 16.19

100 lb.

FULL EXTENSION

• Push-to-open motion • Side mount• Lever disconnect• Non-handed

Length Pair 5 + Pair 48204 20" $ 18.99 $ 17.09 47143 22" $ 19.99 $ 17.99

100 lb.

OVER TRAVEL

Zinc finish Length Pair 5 + Pair 48386 10" $ 13.99 $ 12.59 49778 12" $ 13.99 $ 12.59 43788 14" $ 14.99 $ 13.49 44169 16" $ 15.99 $ 14.39 46981 18" $ 16.99 $ 15.29

Length Pair 5 + Pair 45953 20" $ 16.99 $ 15.29 44311 22" $ 17.99 $ 16.19 49779 24" $ 18.99 $ 17.09 49422 26" $ 19.99 $ 17.99 43879 28" $ 20.99 $ 18.89



Black finish Length Pair 5 + Pair 47057 10" $ 13.99 $ 12.59 44664 12" $ 13.99 $ 12.59 44375 14" $ 14.99 $ 13.49 47396 16" $ 15.99 $ 14.39

Length Pair 5 + Pair 49414 18" $ 16.99 $ 15.29 48506 20" $ 16.99 $ 15.29 45738 22" $ 17.99 $ 16.19 48662 24" $ 18.99 $ 17.09

DraGu

Max

ReqReqFor Minwith

3/4 E

5

Special two-piece design creates smooth, "no-clicking" action when opening and closing. Perfect for small to medium-sized drawers. Not for use with inset drawers. Zinc finish Length Pair 5 + Pair 44306 10" $ 8.99 . . $ 8.09 49792 12" $ 8.99 . . $ 8.09 48610 14" $ 9.99 . . $ 8.99 48885 16" $ 11.99 $ 10.79 46063 18" $ 12.99 $ 11.69

Length Pair 5 + Pair 46864 20" $ 13.99 $ 12.59 44141 22" $ 14.99 $ 13.49 46712 24" $ 15.99 $ 14.39 47805 26" $ 17.99 $ 16.19 48027 28" $ 19.99 $ 17.99

47025 Rear brackets (add 0"-13⁄8" depth) . . . . $ 5.49

Susp

Drawand 1lengt 30636


Centerline Lifetime Series 757-CC

Super-smooth closing action! A spring-loaded, pressure-controlled mechanism automatically engages to ease the drawer quietly shut during the final 11/2" of travel.

• Soft-closing motion • Side mount• Lever disconnect• Non-handed

Zinc finish Length Pair 5 + Pair 45873 14" $ 17.99 $ 16.19 47366 16" $ 18.99 $ 17.09 48084 18" $ 19.99 $ 17.99

Length Pair 5 + Pair 44624 20" $ 19.99 $ 17.99 47150 22" $ 21.99 $ 19.79

75 lb.

OVER TRAVEL

GO-E Replacabintrim wset. Rside a 51997

Ba

The Rockler AdvantageMounting screws are included with most of our slides and installation instructions are available online.

“Handed” vs. “non-handed” slides“Handed” slides have a specific component for the left side and one for the right. “Non-handed” slides can be installed on either side.

Soft-Close Adapter for Epoxy Slides 58004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.99 (See details in the Slide Installation Accessories Section)

120

Drawer Slides

800-279-4441


01192018123926

The Rockler AdvantageMounting screws are included with most of our slides and installation instructions are available online.

Under Mount/Concealed Center Mount

3/4 Extension Full Extension 3/4 Extension

e

ide

+ Pair 15.29 16.19 17.09 17.99 18.89 $ 5.49

$ 5.49

+ Pair 15.29 15.29 16.19 17.09

King 1A88F

A light push opens the drawer a few inches. Soft close mechanism retracts it slowly and silently back into the cabinet. Drawer height must be 5/16" less than cabinet opening. No pulls or knobs needed. Includes face frame brackets: add 7/8"-29/16" to depth. Length Pair 5+Pair 45900 . . . . . . 18" . . . . . . . . . .$ 74.99 . . . . . . . . $ 67.49 47500 . . . . . . 21" . . . . . . . . . .$ 76.99 . . . . . . . . $ 69.29

Drawer and Cabinet Guidelines Suspension GO-EZ

ReplacementBlum Tandem w/Blumotion

Salice Futura

King 1A88F


Delta Glide

Centerline Concealed

Maximum drawer side thickness No limit No Limit 5/8" Max.1/2" Min.

5/8" Max.1/2" Min. 5/8" No limit No limit No limit

Required side clearance (each side) 1/8" 1/8" 7/32"-5/16" 7/32"-5/16" 7/32"-5/16" NA NA 1/8"Required drawer bottom recess None 3/8" 1/2" 9/16" 1/2" 1/4" None NoneFor face-frame or frameless cabinets? Face frame Face frame Both Both Both Both Both Face frameMinimum face-frame cabinet depth with rear brackets 235⁄8" Max. Length 24"

cut to fitLength plus

13⁄16"Length of slide

plus 7/8"Length of slide

plus 7/8"Length of slide 235⁄8" Max. 22 " Max.

3/4 EXTENSION

50 lb.

75 lb.

FULL EXTENSION

3/4 EXTENSION

50 lb.

• Standard motion• Under mount/concealed• Manual disconnect• Handed

• Push-to-open, soft-close motion• Under mount /concealed• Lever disconnect• Handed

• Standard motion• Center mount• Manual disconnect

Centerline Lifetime Center Mount Series 714

No side clearance? No problem. Low-profile (3/8" thick) slide mounts under your face-frame drawers. Included tack pads add stability. One slide per pack. Zinc finish Length Pack 5 + Packs 47510 14" $ 7.99 . . . $ 7.19 47772 16" $ 7.99 . . . $ 7.19 45885 18" $ 8.99 . . . $ 8.09

Length Pack 5 + Packs 48114 20" $ 8.99 . . . $ 8.09 49796 22" $ 9.99 . . .$ 8.99 44087 24" $ 9.99 . . . $ 8.99

3/4 EXTENSION

35 lb.

Suspension Drawer Slide

Drawer height must be 5/8" less than cabinet opening and 1/8" side clearance. 225/8" slide can be cut to length. Drawer extends 41/2" less than overall length. 30636 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 16.99

Delta Glide

Adjusts to your drawer specifications. Complete with a positive out-stop, two friction-free disc rollers and quick-release bracket. All but 7” of the drawer extends beyond cabinet front. 221/2" metal track, cut to length. 33373 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.99

$ 5.49

lly final

+ Pair 17.99 19.79

• Standard motion • Center mount• Friction fit disconnect

Blum Tandem Plus Blumotion

Slide engages 2" before the drawer is closed and gently eases it back into the cabinet. Easy four-directional adjustments. Optional Locking Devices add lateral adjustment. Rear bracket included and adds 1/4"-17/8" in length. Length Pair 5+Pair 51675 9" $ 35.99 $ 32.39 43841 12" $ 35.99 $ 32.39 46974 15" $ 35.99 $ 32.39

90 lb.

FULL EXTENSION

Length Pair 5+Pair 47648 18" $ 39.99 $ 35.99 44034 21" $ 39.99 $ 35.99

57268 Tandem Undermount Drawer Slide Jig $ 39.99 46209 Optional locking device . . . . . . . . . . . . . . $ 6.49

• Soft-closing motion• Under mount/ concealed• Lever/locking device disconnect• Handed

Salice Futura

Just give the drawer a nudge and it gently springs out. Ideal for cabinets without knobs or pulls for style or space considerations. Includes face frame brackets: add 7/8"-21/2" to dept. Length Pair 5+Pair 49616 12" $ 29.99 $ 26.99 43999 15" $ 31.99 $ 28.79

75 lb.

FULL EXTENSION

Length Pair 5+Pair 48263 18" $ 35.99 $ 32.39 46679 21" $ 39.99 $ 35.99

• Push-to-open motion• Under mount/concealed• Manual locking disconnect• Handed

GO-EZ Replacement Slide Set Replacement for worn GO-EZ slide used in millions of cabinets since the 1940's. Slide length is cut-to-fit; simply trim with a tin snips. Two Slides and two brackets per set. Rear bracket up/down adjustable. Front bracket side/side adjustable. Mounting screws not included. 51997 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.99 set

Front bracket adjustable

Back bracket adjustable

des

3/4 EXTENSION

50 lb. • Standard motion• Center mount• Manual disconnect

Centerline® 22'' Center-Mount Concealed Drawer Slide

Drawer rides smoothly on concealed nylon rollers, and lifts out easily for cleaning. Requires only 1/8" of clearance at each side of drawer. Drawer height must be 3/8" less than cabinet opening. 22" track can be cut down for shallower cabinets. Drawer extends 4" less than length. 50-pound rating. 58012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99

ONLINE VIDEO!

121

Drawer Slides

rockler.com


01192018123926

The Rockler AdvantageMounting screws and installation instructions are included with most slides!

Drawer and Cabinet Guidelines



Centerline Lifetime 757A

Floor Mounted Rollout

Heavy-Duty Pantry System

Maximum drawer side thickness No limit No limit No limit No limit NARequired side clearance (each side) 3/4" 1/2" 1/2" 1/2" NARequired drawer bottom recess None None None None NAFor face-frame or frameless cabinets? Both Both Both Both BothMinimum face-frame cabinet depth Slide length Slide length Slide length Slide length Slide length

Files — Side Mount Side Mount Shelves Bottom Mount

Over Travel

150 lb.

OVER TRAVEL


Great for deeper drawers and files. 11/2” over travel provides complete drawer access. Simply lift drawer off rails to remove and reinstall. Replaces Accuride 4034. Length Pair 5+ Pairs 44751 14" . . . . . . . . . $ 26.99 . . . . . . . . . . . . . $ 24.29 49078 16" . . . . . . . . . $ 27.99 . . . . . . . . . . . . . $ 25.19 46553 18" . . . . . . . . . $ 29.99 . . . . . . . . . . . . . $ 26.99 47045 20" . . . . . . . . . $ 32.99 . . . . . . . . . . . . . $ 29.69 45554 22" . . . . . . . . . $ 34.99 . . . . . . . . . . . . . $ 31.49 43907 24" . . . . . . . . . $ 36.99 . . . . . . . . . . . . . $ 33.29 45741 26" . . . . . . . . . $ 39.99 . . . . . . . . . . . . . $ 35.99 44978 28" . . . . . . . . . $ 39.99 . . . . . . . . . . . . . $ 35.99

• Standard motion • Side mount • Lift off rail disconnect • Handed

220 lb.

FULL EXTENSION


Strong enough for pantry pullouts, file drawers, and other large-scale applications. Features a simple trigger disconnect, a closed-position hold-in and 32 mm system compatibility. Length Pair 5+ Pair 46899 16" . . . . . . . . . $ 34.99 . . . . . . . . . . . . . $ 31.49 46277 18" . . . . . . . . . $ 37.99 . . . . . . . . . . . . . $ 34.19 48425 20" . . . . . . . . . $ 39.99 . . . . . . . . . . . . . $ 35.99 45108 22" . . . . . . . . . $ 42.99 . . . . . . . . . . . . . $ 38.69 45861 24" . . . . . . . . . $ 46.99 . . . . . . . . . . . . . $ 42.29 46146 26" . . . . . . . . . $ 49.99 . . . . . . . . . . . . . $ 44.99 44070 28" . . . . . . . . . $ 54.99 . . . . . . . . . . . . . $ 49.49

• Standard motion • Side mount • Lever disconnect • Non-handed

100 lb.

FULL EXTENSION

Centerline Lifetime Series 757A

Ideal for kitchen pullouts, shelves, shallow drawers and entertainment center shelving. Easy-reference shelf tabs simplify installation. Hold-in mechanism prevents rollout. Replaces Accuride 3864. Length Pair 5+ Pairs 49204 16" . . . . . . . . . $ 19.99 . . . . . . . . . . . . . $ 17.99 43888 18" . . . . . . . . . $ 19.99 . . . . . . . . . . . . . $ 17.99 45493 20" . . . . . . . . . $ 21.99 . . . . . . . . . . . . . $ 19.79 44583 22" . . . . . . . . . $ 22.99 . . . . . . . . . . . . . $ 20.69 48656 24" . . . . . . . . . $ 24.99 . . . . . . . . . . . . . $ 22.49

• Standard motion • Side mount • Lever disconnect • Handed

Heavy-Duty Pantry Slide Systems

These three slide sets include robust over-travel slides (two bottom mount and one top mount) and all mounting hardware. All slides feature smooth ball-bearing action, hold-in detents and a zinc finish. Height clearance for slides is 21/16". Overall travel is plus 7/8". 24821 20" System . . . . . . . . . . . . . . . . . . . . . . . $ 99.99 24241 26" System . . . . . . . . . . . . . . . . . . . . . . $ 109.99

130 lb.

OVER TRAVEL

• Standard motion • Two under-mount slides plus one top-mount slide

Full Extension Over TravelFull Extension

47585 Rear brackets (add 0"-13⁄8"depth) . . . . . $ 5.49

75 lb.

OVER TRAVEL

Floor Mounted Rollout

• Standard motion • Cabinet bottom mount• Manual disconnect • Handed

Perfect for pull-out waste containers, trays, and other space maximizing storage! A white epoxy finish looks great in kitchens. The 75-pound load rating offers plenty of support for most roll-out applications. Mounts directly to base of cabinet for easy installation. Includes mounting hardware. Full extension plus 11/2” over travel. Length Pair 29970 18" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 34.99 22800 22" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99

Over Travel

“ Ordered 12 sets (757A) to make a pantry in 4 foot wide storage cabinet that had a divider half way across. The slides were a snap to install and the shelf (3/4 in plywood) connected just as easy. Added a 1" lip around the shelf. Would suggest that anyone could install these slides.”

Grayson

Pantry — Under Mount

Floo Perfecwhitesupposlides 29970 22800

Heav For ovsteel pair. FOverlaoverlahardw 23270 25046 29222 22149 24023 24942 28075 21087

Corn Safegand gUse oInclud 57772

122

Specialty Slides — Files, Shelves and Pantries

800-279-4441


01192018125613

lides!

y em

h

t

xy rating ons. ation.

1/2”

Pair 34.99 39.99

Floor Mounted Rollout Perfect for pull-out waste containers, trays, and other space maximizing storage! A white epoxy finish looks great in kitchens. The 75-pound load rating offers plenty of support for most roll-out applications. Mounts directly to base of cabinet. Includes slides and mounting hardware. Full extension plus 11/2" overtravel. 29970 18" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 34.99 pr. 22800 22" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 39.99 pr.

Birch Pullout Shelf Kit Installs quickly for ultimate cabinet access. Includes 100 lb. rated Blum slides, material for one shelf and instructions. Size is variable to fit openings from 6" to 32" wide. Sides and back are 1/2", 9-ply Baltic birch. Front is 3/4", 13-ply Baltic birch. 1/4" melamine bottom is easy to clean. 27099 is for cabinets 20" to 22" in depth. 29847 is for cabinets 22" to 24" in depth. 27099 20"-22" depth . . $ 79.99 29847 22"-24" depth . . $ 79.99

Pullout Hardware Kit Each kit will make two rolling shelves (if both are cut to 15" wide or less) when standard guides, two side panels, a bag of screws and two spacers. 32814 22", use with 29847 Kit . . . . . . . . . . . . . . . . . . . . . $ 46.99

Heavy Duty Slide Systems and Hinges for Tall Pocket Doors For over-sized doors (3/4"- 11/4" thick, 30-75 lbs. and up to 26" W X 72" H). Precision steel ball bearings. Each door requires one slide set, one pinion shaft and two hinge pair. For Full Overlay Applications: order one slide set, one pinion shaft and one Full Overlay Hinge Kit per door. The kit includes two full-overlay brackets, four 40mm overlay hinges, four hinge bases, cover caps, instructions, felt pads, and mounting hardware. For doors up to 3/4 thick. 23270 18" System . . $ 109.99 pr. 25046 20" System . . $ 109.99 pr. 29222 22" System . . $ 114.99 pr. 22149 24" System . . $ 114.99 pr. 24023 26" System . . $ 114.99 pr. 24942 28" System . . $ 114.99 pr. 28075 30" System . . $ 114.99 pr. 21087 72" Pinion Shaft .$ 15.99

Hinge Sets (Cup Size, Max. Door Thickness)Two pair required per door. 27906 Inset/Face Frame (35mm, 3/4") $ 19.99 pr. 25929 Partial Overlay (40 mm, 3/4") .$ 23.99 pr. 26446 Thick Door Inset (40mm, 11/4") $ 24.99 pr.Full Overlay Hinge KitOne kit required per door. 20072 Full Overlay Hinge Kit . . . . . . . . . . $ 69.99

Pocket Door Rollers Put an end to pocket doors that turn too soon. 22865 4-Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.99

EZ Pocket Door System Our easiest option for stowaway doors! Each set includes two slides to support one door (30 lb. maximum). Precision steel ball bearings ensure smooth-sliding operation. Maximum door dimension: 24" wide x 42" tall. One hinge pair (sold separately) is required per door. For 12-16" slides, door travel is slide length less 3". For 18-24" slides, travel is length less 4".

29655 12" Slides . . . $ 44.99 pr. 22692 14" Slides . . . $ 44.99 pr. 23212 16" Slides . . . $ 44.99 pr. 29207 18" Slides . . . $ 45.99 pr. 20048 20" Slides . . . $ 46.99 pr. 20428 22" Slides . . . $ 47.99 pr. 22074 24" Slides . . . $ 48.99 pr.

Hinge Sets (Cup Size, Max. Door Thickness)One pair required per door. 27906 Inset/Face Frame (35mm, 3/4") $ 19.99 pr. 25929 Partial Overlay (40 mm, 3/4") ..$ 23.99 pr. 26446 Thick Door Inset (40mm, 11/4") $ 24.99 pr.

European-Style Sliding Door Hardware Use one set per sliding door. Offers silent operation and a nearly invisible profile. Supports doors up to 44 pounds. Includes two 58" long tracks, two upper guides and two lower rollers. Requires 35mm holes. 88155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 30.99

Corner Guards for Pullout Shelf Safeguard cabinet doors from dents and gouges caused by sharp corners. Use on 3/4" material. Durable plastic. Includes screws. 57772 . . . . . . . . . . . . . . . . . . . . .$ 4.99 pr.

123

Specialty Slides — Pullout Shelves and Doors

rockler.com


01192018125613

Classic Wood Center Mount Drawer Slide Durable, long-lasting. A high-tech kiln drying method eliminates warp. Slide comes undrilled, allowing customization. 22” long. Each 10 + 24877 . . . . . . . . . . . . . . $ 9.99 . . . . . . . . . . . . . . . $ 8.99

Mini Ball-Bearing Drawer Slides 3/8" thick. Requires a 1/4" mortise in the drawer side. Optional snap for positive close is included! Drawer Depth Pair 30804 73⁄16" . . . . . . . . .7 1⁄4"-111⁄4" . . . . . . . . . . $ 10.99 30811 911⁄16" . . . . . . . . 9 7⁄8"-151⁄8" . . . . . . . . . . . $ 9.99

Slide Glides Self-lubricating plastic glides keep drawers aligned on a wood track. Set consists of one slide glide and two L-shaped side saddles. Use with Deluxe Center Track (29892). 28357 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.99 set

Accuride 9301 Heavy-Duty Full-Extension SlidesGet the ultimate performance, including full-extension, a drawer-silencing feature and the ability to side- or flat-mount for a number of applications. Heaviest rated slide available.• Tool storage pullouts• Wide lateral file drawers • Vehicular strorage drawers• Use for large pantry pulloutsIn general, slides installed in drawers that are wider than they are deep, are subject to lateral (side) stresses that reduce their load carrying capacity. Likewise, slides in applications that are cycled frequently also carry a lower weight rating.Load Rating: Moderate use: 500 lbs. Frequent use: 400 lbs. Mobile (Vehicular): 300 lbs. Flat Mount: 150 lbs. Length Pair 30748 . . . . . . . . . . . . . . . . 34" . . . . . . . . . . . . . $ 274.99 31437 . . . . . . . . . . . . . . . . 36" . . . . . . . . . . . . . $ 289.99 30755 . . . . . . . . . . . . . . . . 48" . . . . . . . . . . . . . $ 399.99

Hafele Metal Drawer Sides with Self-Closing Slides Epoxy-coated metal drawer sides eliminate the need to build a wooden drawer box and speed installation with integrated slide mechanism. 3/4 extension. Self-closing. 16" Slides — White Set 45951 31/4" Sides . . . . . . . . . . . . . . . . . . . . . . . . $ 10.99 45844 6" Sides . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 22" Slides — White 44807 31/4" Sides . . . . . . . . . . . . . . . . . . . . . . . . $ 14.99 48936 41/2" Sides . . . . . . . . . . . . . . . . . . . . . . . . $ 16.99 47018 6" Sides . . . . . . . . . . . . . . . . . . . . . . . . . . $ 18.99

Heavy-Duty Mounting BracketsSide Mount Brackets Slide Length Pair 56775 34" . . . . . . $ 99.99 56782 36" . . . . . . $ 99.99 56790 48" . . . . . $ 109.99 56798 60" . . . . . $ 119.99

Bottom Mount Brackets Slide Length Pair 56836 34" . . . . . $ 199.99 56844 36" . . . . . $ 199.99 56852 48" . . . . . $ 219.99 56860 60" . . . . . $ 239.99

Drawer Sides Solid birch veneer drawer material is 1/2" thick and has a 1/4" dado for the drawer bottom. Cut to length and assemble with your drawer front. 4 foot lengths. Height Each 10 + 12229 21/2" . . . . . . . . . $ 6.99 . . . . . . . . . . . . . . . $ 6.29 12237 33/8" . . . . . . . . . $ 9.99 . . . . . . . . . . . . . . . $ 8.99 12245 53/8" . . . . . . . . . $ 12.99 . . . . . . . . . . . . . $ 11.69 12252 7" . . . . . . . . . . . $ 16.99 . . . . . . . . . . . . . $ 15.29 12260 10" . . . . . . . . . . $ 22.99 . . . . . . . . . . . . . $ 20.69

28357

29892

Deluxe Center Track Deluxe hardwood tracks fit the Slide Guides (28357 and 39778). Measures 11/8"W x 3/4"H x 231/4" long. May be cut to size. Each 5 +29892 Center Track only . . . . $ 4.99 . . . . . . . . $ 4.49

AccurideSeries 9301

Side Mount Bottom Mount

Rear Mounting Bracket for Wood Center Mount Drawer Slide Simplifies the installation of our wooden Center-Mount Drawer Slide (24877, sold separately). Bracket fits over back end of slide and a single screw secures it to the back of the drawer. 56554 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 1.49

Fast Align and f 45128

InseBracUndSlide Maketo insBrackyou tThreawide GrassMade 54200

Nylo Get fradhesgreat are id 56620 59739 56781

Custom-Fit Slide Glide Adjustable version of item #28357. Backplate adjusts to any wooden center-mount drawer slide from 1” to 17/16” wide in 1/16” increments. Includes L-shaped corner glides and screws. Self-lubricating plastic. 59130 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3.99

124

Specialty Slides and Drawer Parts

800-279-4441


01192018130144

sion, or rated

er esses slides y a

Pair74.99 89.99 99.99

ckets Pair

99.99 99.99 19.99 39.99

unt

Blum® Mounting Sockets 3" sockets and elongated mounting slots permit up to 2" of slide adjustment. One left and one right hand. 71647 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.99 pr. Blum® Universal Mounting Brackets

Mount Blum slides to the underside of a counter or to cabinet bottoms. 21577 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99 set

FastBlock Drawer Slide Mounting Blocks Align slides parallel, perpendicular to the cabinet face and for height. Adjusts up/down 3/16", in/out 5/8"-1". 45128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 1.99 pr.

Slip-It Specially formulated, silicone-free lubricant for wooden windows, doors, drawers and any other wood-on-wood application. Easy to apply with a brush. One pint. 10140 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 16.99

Nail-On Drawer Glides 3/32" thick. 8 per pack. 10869 3/8"H x 3/4"W x 1/2"D . . . . . . . . . . . $ 3.99 pk. 69609 11/16"D x 1/2"W . . . . . . . . . . . . . . . $ 2.99 pk. No-Tip Drawer Stops Prevents drawer from pulling out. 4 per pack. 10851 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.99 pk.

10851

10869

Inset Mounting Brackets for Undermount Slides Makes it easy to install undermount slides in an inset application. Brackets screw directly to back of face frame, saving you the time and expense of blocking out the interior. Threaded hole slides in an adjustable slot to accept a wide variety of slides, including Blum, Salice, Futaba, Grass, KV and Accuride concealed undermount slides. Made in USA. 54200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.99

ONLINE VIDEO!

Attach to cabinet

Attach to drawer

Rear Brackets for Centerline® Lifetime Slides Mount slides to face-frame cabinets. 47025 For 766 Series . . . . . . . . . . . . . . . . . . . . . . $ 5.49 47585 Rear Brackets for 757 Series . . . . . . . . . . $ 5.49 45680 For 3612 Series . . . . . . . . . . . . . . . . . . . . . $ 5.49

Soft-Close Adapter for Epoxy Slides Upgrades nearly any standard epoxy-coated slide so the drawer eases shut with barely a whisper. Whether retrofitting or using on a new installation, you'll get smooth, quiet, cutting-edge performance. Installation is easy, involving only four screws. Designed for roller slides mounted on wooden drawers. Will not work on metal drawer boxes. One Soft-Close Adapter required for drawers up to 23" wide; for drawers larger than that, two are recommended, one on either side. 58004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.99

Nylo-Tape Friction-Free Tape Get friction-free glide almost instantly with this self-adhesive, self-lubricating nylon tape. Wide tape works great on stationary machine fences, while narrower tapes are ideal for drawers. 10' rolls. 56620 1/2"W x 10 mils thick . . . . . . . . . . . . . . $ 14.99 59739 3/4"W x 10 mils thick . . . . . . . . . . . . . . $ 14.99 56781 3"W x 20 mils thick . . . . . . . . . . . . . . . . $ 44.99

Soft-Stem Bumpers Insert into a 3/16" dia. hole. 8 per pack. 32479 . . . . . . . . . . . . . . . . . . . . $ 2.99 pk.

125

Slide Installation Accessories

rockler.com



Indexing Rod ensures exact spacing on both sides of the cabinet

Locking Wedge holds slide in place

Clear access to screw

holes during installation

Works with ball-bearing slides,

either side or center mount!

See it in action at rockler.com

Rockler® Universal Drawer Slide Jig Install drawer slides quickly, accurately and more easily than ever with this innovative jig! It has a Locking Wedge that holds the slide securely – perfectly level, with the proper setback – so you can position it precisely. Onboard Indexing Rod makes repeat installations a snap. Flat faces allow for easy clamping. Designed to work with most side-mount ball-bearing, epoxy and center-mount slides. Made of durable foam-filled nylon with a steel Indexing Rod. 57302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 29.99

Slide jig can be clamped to cabinet side or face frame

Works with epoxy slides!

Rockler JIG IT® Undermount Drawer Slide Jig Quickly and accurately install Blum Tandem drawer slides in your custom cabinets. Powerful rare earth magnets securely hold the slide as you drive the screws. Slide is positioned perfectly level, with the required 2mm setback. Jig can be clamped in place and features access holes for drill and driver bits. 57268 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 39.99

Rockler JIG IT® Undermount Drilling Guide Precisely locate and drill all holes required to install Blum Tandem undermount drawer slides onto your drawer boxes. Lay the guide on its side to drill the front holes for the locking devices. Stand it up to drill the rear holes that accept the tabs on the slides. Includes Drilling Guide, (2) 2.5mm bits, 6mm bit, (2) stop collars and instructions. 50713 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 29.99

Rockler® Drawer Front Installation Clamps Holds drawer fronts in position while you drive the screws. Thin profile lets you close the drawer with the clamp still on, making it easy to check for alignment. Side micro-adjusters let you dial in the position and use the same setting for a whole stack of drawers. Requires 3/16" clearance between drawer box and cabinet frame and 3/4" between top of drawer box and top of slide. Sold in left/right pairs. 54804 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 39.99 pr.

Thin profile makes it easy to check alignment

Rockler® Drawer Installation Brackets Install drawer slides onto drawer boxes with perfect positioning, every time! Just clamp the brackets in place, set the drawer onto the brackets, pull out the slides and drive your screws. Since you can visually see the location of your drawer, mistakes are greatly reduced. Shoulder provides a positive stop against cabinet rail, or butt bracket upwards against the cabinet member of the slide. For frameless cabinets, point the bracket into the cabinet and clamp against the sidewall. Works with any side-mounted, ball-bearing style slide: Centerline, KV, Accuride etc. Made in USA. 51613 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 14.99 pr.

Step

SatinVinta

126

Drawer Installation Jigs

800-279-4441

3

U

W ro

C

satosyo

VS

(S


01192018130730

tive

eat st ed

29.99

wer the .

29.99

lamp e reatly

wards into aring

99 pr.

52109

Flat Track Bent Strap Style56667

Flat Track Top Mount Style53700

Flat Track Horseshoe Style59088

Weathered Faux Barnwood

Doors not included

Round Track Top Mount Style53051

I-Semble Rolling Door Complete Hardware Kits Ready-to-mount complete hardware kits will complement your custom-crafted rolling door. Roller straps are made of solid steel with sealed ball bearings for glassy-smooth rolling action. All tracks are made of solid 1/4" thick steel. Flat tracks are designed for beam strength and low projection from the wall, with a dovetail joint in the middle to provide a strong mechanical interlock. The soft-close adapter kit (#51786) engages during last section of track to pull the door quietly closed and is compatible with the flat track styles only. Complete kits include the following: (2) Roller Assemblies, (6) Wall Mount Brackets, (2) 393⁄8" Track Lengths, (2) Door Stops, (1) Floor Guide, (2) Anti-jump Discs, (1) Installation Hardware Pack.Rolling Door Complete Hardware Kits — Flat Track 56667 Bent Strap Style, Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 119.99 52109 Bent Strap Style, Stainless Steel (Inset Image) . . . . . . . . . . . . . . . . . . .$ 179.99 59088 Horseshoe Style, Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 119.99 53700 Top Mount Style, Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 119.99 51786 Soft-Close Adapter Mechanism, for Flat Track Styles Only . . . . . . . . .$ 14.99 Rolling Door Complete Hardware Kit — Round TrackRound track, no dovetail joint. 1/4" Solid steel. 53051 Top Mount Style, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 179.99

Build your own rolling door!Expanded assortment and lower prices

54680 51397 55480 50632

Accessories 54680 1113/16"L Handle, Black . . .$ 29.99 51397 1113/16"L Handle, Stainless $ 39.99

55480 2" Dia. Knob, Black . . . . .$ 14.99 50632 2" Dia. Knob, Stainless . .$ 19.99

I-Semble Bypass Rolling Door Complete Hardware KitDual tracks let you hang two doors that roll past one another—ideal for replacing sliding track doors. Roller straps are solid steel with sealed bearings for glassy-smooth action. Tracks are solid 11⁄2"H x 1/4" thick flat steel for beam strength and minimal projection. A soft-close adapter option (#51786) is available. Complete kits include the following: (4) Roller Assemblies, (5) Wall Mount Brackets, (2) 66" Track Lengths, (4) Door Stops, (2) Floor Guides, (4) Anti-jump Discs, (1) Installation Hardware Pack. 56591 Bypass Rolling Door Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 299.99

Bypass Double Door56591

Replace frustrating bi-fold doors

More Rolling Door details at rockler.com/rollingdoor

Soft-Close Adapter MechanismCombines a self-close mechanism with a soft-close damper that pulls the door closed slowly and quietly. Use with I-Semble Rolling Door Hardware Kits (sold separately). Includes mounting screws and instructions. Order two mechanisms for each Bypass Rolling Door Kit (56591). 51786 . . . . . . . . . . . . . . . . . . . . . $ 14.99

I-Semble Rolling Door Hardware Kits All necessary hardware to hang and guide your doors. Handles sold separately.

59088

Recessed Rolling Door Handles Low-profile, ideal for bypass sliding doors. Totally concealed mounting hardware (screws included). 3/16" projection once installed. 13/4"W x 55/8"L x 9/16"D overall. 59695 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99 54093 Stainless Steel . . . . . . . . . . . . . . . . . . . . $ 24.99 59695

Handle sold separately

127

Rolling Door Hardware

rockler.com


01252018155320

Online: rockler.com Call: 1-800-279-44416:00 a.m. – 11:00 p.m Central Time

Product Information: 1-800-260-9663 8:00 a.m. – 6:00 p.m. M-F Central Time

FAX: 1-800-865-1229 Local FAX: 763-478-83954365 Willow Drive • Medina MN 55340

Up to $15.00. . . . . . . . . . . . . . . . . . . $3.99$15.01-$25.00. . . . . . . . . . . . . . . . . . $5.99$25.01-$50.00. . . . . . . . . . . . . . . . . . $7.99$50.01-$75.00. . . . . . . . . . . . . . . . . . $9.99$75.01-$100.00. . . . . . . . . . . . . . . . $11.99$100.01-$125.00. . . . . . . . . . . . . . . $13.99$125.01-$150.00. . . . . . . . . . . . . . . $14.99$150.01-$175.00. . . . . . . . . . . . . . . $15.99$175.01-$200.00. . . . . . . . . . . . . . . $17.99$200.01+. . . . . . . . . . . . . . . . . . . . . $19.99

8P

Ship To: (If different from sold to) Sold To:

Name

Address

City State Zip

Name

Address

City State Zip

Date Daytime Phone # ( ) E-mail Address

Key Code (See Back Cover) Customer # (See Back Cover)

Customers shipping to: AZ, CA, CO, FL, GA, IL, IN, MA,

ME, MI, MN, MO, NY, OH, PA, TX, WA, and WI should submit tax on the subtotal (Line A) at the applicable

rate. County and city taxes also apply.

We use earth-friendly air pillows for packing.

Provides a better cushion and are made entirely from recycled plastic!

Order 24 hours a day, 7 days a weekBy Internet: rockler.comBy Phone: Toll-free – 1-800-279-4441Telephone orders accepted for credit card holders.By Mail: Personal checks and money orders are welcome. Include applicable tax.Mail to: Rockler Woodworking and Hardware4365 Willow Drive, Medina MN 55340 Please do not send cash or C.O.D. orders.By FAX: Toll-free – 1-800-865-1229 Local – 763-478-8395 Please write your credit card numbers clearly and legibly.

Customer service, exchanges and returnsIf you have questions, call Monday throughFriday between 7 a.m. to 8:30 p.m. andSaturday 8 a.m. to 4:30 p.m. Central Timeat 1-800-376-7856. To return or exchangean order, complete the form on the backsideof the enclosed form. Please send returns byUPS within 90 days. Returns after 90 days aresubject to a 25% restocking fee.

Mailing list privacyIf you do not wish to be included in our database, please let us know and we will honor your request. We occasionally make aportion of our mailing list available toorganizations that may interest our customers. If you do not wish to receive these mailings, please send us a note stating this, along with a copy of your mailing label, to: Rockler Companies, Inc., Customer Service, 4365 Willow Drive, Medina, MN 55340. Or visit rockler.com and click on Privacy Statement.

Whoops!Pictorial and typographical errors are subject to correction when orders are placed. Rockler Woodworking and Hardware reserves the right to limit quantities.

Proposition 65 WarningSome products sold in this catalog contain one or more chemicals, including lead, that are known to the State of California to cause cancer and birth defects or other reproductive harm.

ShippingYour order will be shipped within 24 to 48 hours (except for Saturday and Sunday). Express shipping services are available; charges are in addition to regular handling charges and will be billed to your credit card. Please call before 12:00 noon Central Time for express service.

UPS-Next Day: Minimum charge $45.00 up to 1 lb. Approximately $2.50 for each additional lb.

UPS-2nd Day: Minimum charge $15.25 up to 1 lb. Approximately $2.00 for each additional lb.

PricingPrices are valid through 5/5/2018. Sale prices in this catalog are valid 3/2/2018 through 3/29/2018. Prices are subject to change. Prices on the internet and at retail stores may vary from catalog prices. $15 minimum order.

Product InformationCall 1-800-260-9663 8:00 a.m. – 6:00 p.m. Monday-Friday Central Time

ResellersTax exempt orders must be accompanied by a signed copy of your tax certificate.

Alaska and Hawaii, Puerto Rico, Guam, Virgin Islands customersExtra shipping costs are incurred for orders sent to Alaska, Hawaii, Puerto Rico, Guam and Virgin Islands. Please call catalog sales at 1-800-279-4441 for estimated charges.

International/Canadian orders by mailExtra shipping charges may apply and will be billed directly to your credit card. Customer pays customs upon delivery of merchandise. Canadian customers pay in U.S. funds at current exchange rates.

See Order Information for Alaska, Hawaii, Puerto Rico, Guam and the Virgin Islands.

Find

AbrasAdhe

Band Barn BeadBed HBenchBiscuBolts/ . . BookcBoschBox HBox JBrackBrandBunk Butle

Cabin . . Cane CarviCasteCatchChairCircleClamClam . .CNC CompCorneCounCrafts . .

Desk Door DoorsDovetDoweDraw . . DrawDrawDrill PDrillin . . Dust Dust

128

Order Form

800-279-4441


01222018092346

395

s

h

debyare

ll ke a

omers. ngs,

ockler 5 it ent.

bject er e right

Find it fast! The page numbers in BOLD contain the largest selection of the category listed.

Locks. . . . . . . . . . . . . . . 86, 89, 104, 118Lumber . . . . . . . . . . . . . . . . . . . . . 68-69

M-N

Magnets/Magnetic Accessories. . . . . . 60Makita Power Tools. . . . . . . . . . . . . . . . 4Marking/Measuring/Guides. . . . 7, 12, 18 . . . . . 21, 43-44, 47, 50, 56, 62, 67, 79Media Cabinet Supplies . . . 98, 123, 130Miter Gauges/Tools/Parts . . . . . . . . . . 56Mobile Bases . . . . . . . . . . . . . . . 2, 8, 66Music Boxes/Movements/Kits . . . . 90-93Nail Guns/Nails/Nail Removers. . . . 61, 94

O-P

Office Furniture. . . . . . . . . . . . . . . 88, 98Panel Retainers . . . . . . . . . . . . . . . . . 104Pegs . . . . . . . . . . . . . . . . . . . . . . . . . . 83Pen Turning . . . . . . . . . . . . . . . 10, 12, 82Pencil Drawers . . . . . . . . . . . . . . . . . . 98Picture Framing. . . . . . . . . . . . . . . . . . 77Planers . . . . . . . . . . . . . . . . . . . . . . . . . 3Plugs & Plug Cutters . . . . . . . . . . . 60, 71Plywood . . . . . . . . . . . . . . . . . . . . . . . 69Pocket Door Slides . . . . . . . . . . . . . . 123Pocket Hole Jigs . . . . . . . 61, 63, 79, 132Porter-Cable Power Tools . . . . . . . . . . . 4Power Tools & Accessories . . . . . . . 3, 34Pulls & Knobs . . . . . . . 90, 104, 106-107Push Sticks . . . . . . . . . . . . . . . . . . 57, 80

Q-R

Rikon Power Tools . . . . . . . . . . . . . . . . . 4Router Accessories .5, 7-8, 13-23, 27-28 . . . . 35, 40-41, 44, 55-56, 64-67, 83, 92, 101Router Bits 4-5, 9, 13, 18, 21-28, 61, 83, 105Router Tables & Lifts. . . . . . . 5, 8, 14-21 . . . . . . . . . . . . . . . . . 35, 40, 56, 64-65Routers . . . . . . . . . . . . . . . . . . . . . . . . . 4

S

Safety Equipment. . . . . . . . .7-8, 19, 21, 28 . . . . . 44-45, 55-57, 66-67, 80, 131-132Sanding . . . . . . . . . . . . . . . . . .4, 11-12, 76Saw Blades . . . . . . . . . . . . . . 7, 9, 52-54Saws & Accessories . . . . . 3, 7-10, 21, 28 . . . . . . . . . . . . . 34, 43, 52-57, 71, 80SawStop Power Tools . . . . . . . . . . . . . . 3Screw Plugs & Buttons . . . . . . . . . 63, 71Screws , Drivers & Accessories .58, 61-63 . . . . . . . . . . . . . . 78-79, 84, 105, 132 Scroll Saws & Accessories . . . . . . . . . . 52Self-Centering Bits . . . . . . . . . 13, 58-60Sewing Plans & Hardware . . . . . . . . . 88Sharpening . . . . . . . . . . . . . . . . . . . . . 12Shelf Hardware . . . . . . 88, 100-101, 130Shop Lighting . . . . . . . . . . . . 8, 131-132

Fasteners/Bolts/Screws . . . . . . . . . 58, 63 . . . . . . . . . . . . . . . . . . 78-79, 84, 105Featherboards. . . . .19, 44-45, 56-57, 80Fein Power Tools . . . . . . . . . . . . . . 14, 36Felt Dots/Tape . . . . . . . . . . . . . . . . . . . 97File Cabinet Parts . . . . . . . . . . . . . . . . 88Finishing Supplies. . . . . . . . . . . 4, 10-12, 41 . . . . . . . . . . . . . . . . . . . . . . .66, 72-76, 94Fold Down Bed Hardware . . . . . . . . . . 85Forstner Bits . . . . . . . . . . . . . . 8, 59, 109Freud. . . . . . . . . . . . . . . . . . 5, 26, 53-54

G

Gift Building. . . . . . 4, 10, 12, 28, 68, 75, 77 . . . . . . 82-83, 86-94, 101, 109, 113, 125Glass Door Hardware/Molding . . . . . 104Glides/Levelers/Casters . .3, 8, 19, 64, 96-97Glue & Glue Applicators . . . . . . . . 11, 77Grommets & Installation. . . . . . . . 28, 98

H

Hand Tools/Planes/Saws . . . . . . . . . . . 71Hanger Bolts . . . . . . . . . . . . . . . . . . . . 78Hanging/Mounting Hardware . . . . . . 127Hardwood . . . . . . . . . . . . . . . . . . . 68-70Hinge Installation . . . . . 13, 92, 109-114Hinges, Cabinet. . . . . . . 13, 86, 109-117Hinges, Project & Specialty . . 87-94, 104 . . . . . . . . . . . . . . . 110, 116-117, 123Home Office . . . . . . . . . . 28, 88, 98, 101Hose, Dust Collection . . . . .14-15, 30-39

I-J

Icebox Hardware. . . . . . . . . . . . . . . . . 88Installation & Moving . . . . . . . . . . . . . . . . . 8Insty-Drive Bits & Systems . . . . . . . . .13, 58JET Power Tools. . . . . . . . . . . . . . . . . . 29Jewelry Box Hardware & Kits . .90-93, 125Jig Knobs/Parts . . . . . . . . . . 6-9, 40-45, 78Jig It System . 13, 23, 27-28, 42, 92, 101Jigs . . . . . . . 6, 13, 18, 23, 27-28, 42-43 . . . .61, 66, 87, 92, 101, 105, 126, 132 Joinery. . . . . . . . . . . . . . . . . . . 61-63, 79

K

Kitchen Organization/Hardware . . . . 123Knobs & Pulls . . . . . . . . . . . 90, 104-107Kreg . . . . . . . . . . 45, 61-63, 66, 79, 132

L

Ladders, Library/Rolling. . . . . . . . . . . . 81Laguna Power Tools . . . . . . . . . . . . . . . 3Lathes . . . . . . . . . . . . . . . . . . . . . . 12, 39Levelers/Glides/Casters . .3, 8, 19, 64, 96-97Lid Supports . . . . . . . . . . . . . . . . . 86-87Lighting, Shop. . . . . . . . . . . . 8, 131-132

A

Abrasives . . . . . . . . . . . . . . 4, 11-12, 76Adhesives/Applicators . . . . . . . 11, 77, 94

B

Band Saw Accessories. . . . . . . . 9, 52, 57Barn Door Hardware . . . . . . . . . . . . . 127BeadLOCK. . . . . . . . . . . . . . . . . . . 10, 61Bed Hardware, Plans, Parts. . . . . . . . 83-85Bench Cookie Plus . . . . . . . . . . . . 41, 66Bolts/Fasteners/Screws . . . . . . . . . 58, 63 . . . . . . . . . . . . . . . . . . 78-79, 84, 105Bookcases/Plans & Hardware . . . . . . 101Bosch Power Tools . . . . . . . . . . . . . . . . 4Box Hardware . . . . . 86-93, 109, 113, 125Box Joint Aids . . . . . . . . . . . . . 23, 27, 92Brackets . . . . . . . . . . . . . . . 64, 100-101Branding Irons . . . . . . . . . . . . . . . . . . 75Butler Tray Hinges . . . . . . . . . . . . . . . . 88

C

Cabinet Building & Repair . . . . . . . . 28, 47 . . . . . . . . . . . . . . . . .102-103, 123-126Cane & Rush Supplies. . . . . . . . . . . . . 95Carving Tools & Blanks . . . . . . . . . . 4, 68Casters/Glides/Levelers . .3, 8, 19, 64, 96-97Catches . . . . . . . . . . . . . . . . . . . . 89, 118Chair Building & Repair . . . . . . . . 94-95Clamp-It . . . . . . . . . . . . . . . . . . . . . . . 46Clamps & Clamp Rack . . . . . 6-9, 40-51 . . . . . . . . . . . . . . . . . . . . . . .63, 132CNC Machines & Accessories . . . . . . . . 5Computer Accessories. . . . . . . . . . 28, 98Corners/Braces . . . . . . . . . . . . . . . . . . 89Countersinks . . . . . . . . . . . . . . . . . 58-60Crafts & Supplies . . 4, 10, 12, 28, 60, 68, 75 . . . . . 77, 82-83, 88, 90, 93-94, 101, 125

D

Desk Hardware . . . . . . . . . . .28, 88, 98, 101Door Making. . . . . . . . . . 13, 22-26, 103Doors, Custom Order. . . 13, 26, 102-103Dovetail Jigs/Accessories . . . . . . . . . . 27Dowels, Pins & Jigs. . . . . . . . . . . . 62, 71Drawer Building & Repair . . . . 13, 19, 70 . . . . . 88, 102-103, 106-107, 119-126Drawer Slides . . . . . 13, 70, 102, 119-126Drawers, Custom Order . . . . . . . . 102-103Drill Press Accessories . . . . . . . . . . . . . . 59Drilling . . . . . . . . . . . . . 8, 13, 22, 58-63 . . . . . . . . . . . 101, 109, 114, 130, 132Dust Collection. . . .3, 14-15, 19, 27-39, 59Dust Right . . . . . . . . . . .14-15, 19, 29-39

E-F

Earlex . . . . . . . . . . . . . . . . . . . . . . . . 11, 73Edging/Edge Banding. . . . . . . . . . . . 70, 93Entertainment Hardware/Plans . 101, 123

Our Gift Card is the perfect gift for every woodworkerBest of all, it can be used at any of our retail locations or for catalog and online purchases! 48580 . . . . . . . .$10 Min. (No Max.)

Our Gift Card is the perfect

rockler.com

Shop Stands . . . . . . . . . 8, 19, 40, 64-65Shop Vacuum . . . . . . . . . . . . . . . . 14, 36Shutter Making . . . . . 6, 13, 69, 105, 116Sign Making . . . . . . . . . . . . . . . . . 28, 83Slides, Drawer. . . . . . 13, 70, 102, 119-126Sliding Door Hardware. . . . . . . . . . . . . 127Speaker Cloth & Related . . . . . . . . 98, 130Sprayers, Paint & Finish. . . . . . 11, 73-74Storage, Kitchen/Bath/Closet . . . . . . . 123Storage, Shop . . . . . . . 7-9, 12, 14, 19, 21 . . . . . . . 36, 39, 51, 55, 63, 66-67, 76Suede Tex . . . . . . . . . . . . . . . . . . . . . . 91SuperMax . . . . . . . . . . . . . . . . . . . . 3, 29Supports . . . . . . . . . . 8, 66, 88, 100-101Swivels . . . . . . . . . . . . . . . . . . . . . 94, 98

T

Table Building & Repair . . . . . 10, 97, 99Table Saws & Accessories. . . . . 3, 7, 53, 56Tables – Shop/Power Tool. . .8, 19, 40, 64-65Tenoning. . . . . . . . . . . . . . . . . 10, 22, 61Threaded Inserts . . . . . . . . . . . . . . 78-79Tool Maintenance/Cleaning . . . . . 7-9, 14, 36 . . . . . . . . . . . . . . . . . .39, 57, 63, 67, 72-74Triton Power Tools. . . . . . . . . . . . . . 4, 16Trunk Hardware . . . . . . . 86-93, 109, 113T-Slot Bolts, Track, Nuts, Tools, Molding . . . . . . . . . . . . 6, 9, 24, 35, 40-44, 78Turning Accessories 10, 12, 39, 76, 82, 88TV Swivels, Pullouts & Lifts. . . . . . . . . 98

U-V

Vacuums . . . . . . . . . . . . . . . . . 14, 29, 36Velvet . . . . . . . . . . . . . . . . . . . . . . . . . 91Veneer & Supplies. . . . . . . . . . . . . 70, 93Vent Fans & Vents . . . . . . . . . . . . . . . . 98Vises . . . . . . . . . . . . . . . . . . . . . . . . . . 65

W-Z

Wheels . . . . . . . . . . . . 3, 8, 64-65, 96-97Woodburning . . . . . . . . . . . . . . . . . . . 75Workbenches/Parts. . . . . . . . . . 7-8, 19-21 . . . . . . . . . . . . . . . . . . . . .40, 55, 64-65Workshop Organizers. . 7-9, 12-14, 19, 21 . . . . . . . . .36, 39, 51, 55, 63, 66-67, 76

129

Index


01242018142120

Visit rockler.com/retail or call 1-877-Rockler for a street address and a demonstration schedule!Arizona Phoenix . . . . . . 602-996-3488California Concord . . . . . 925-521-1800 Pasadena . . . . 626-356-9663 Ontario . . . . . . 909-481-9896 Orange . . . . . . 714-282-1157 Rocklin . . . . . . 916-259-7403 San Diego . . . . 858-268-1005 Torrance . . . . . 310-542-1466Colorado Denver . . . . . . 303-782-0588Florida Altamonte Springs . . . . . . . . . . . . . . . . . . . . . 407-775-2355Georgia Kennesaw. . . . 678-383-0087 Sandy Springs . .404-460-1000

Illinois Bolingbrook . . .331-253-0117 Orland Park . . .708-778-3021 Schaumburg . . .847-310-0447Indiana Indianapolis . . . 317-578-9750Maine S. Portland . . . 207-761-4402Massachusetts Boston . . . . . . 617-497-1136Michigan Novi . . . . . . . . 248-543-5110Minnesota Burnsville . . . . 952-892-7999 Maplewood . . 651-773-5285 Minnetonka . . 952-542-0111Missouri St. Louis . . . . . 314-209-1116New Hampshire Salem . . . . . . . 603-898-5941

New York Buffalo . . . . . 716-631-8922Ohio Cincinnati . . . . 513-671-7711Oregon Portland . . . . . 503-672-7266Pennsylvania Pittsburgh. . . . 412-364-7751Texas Arlington. . . . . 817-417-0070 Frisco . . . . . . . 214-308-6425 Garland. . . . . . 469-329-0971 Houston . . . . . 713-622-6567 Richardson . . . 972-613-8848 Spring . . . . . . . 346-331-4081Washington Seattle . . . . . . 206-634-3222 Tukwila . . . . . . 206-244-9161Wisconsin Milwaukee . . . 414-774-1882

FREEDEMOSSaturdays at 11 AM

New store locationsGeorgia: Kennesaw NOW OPEN!

Illinois: Bolingbrook & Orland Park NOW OPEN!

Minnesota: Minnetonka is NEWLY REMODELED!

Missouri: St. Louis is bigger and better – NOW OPEN!

Texas: Our second Houston location: Spring, TX NOW OPEN!

LED ReplafinishdesireLong is equwattsincan 597294"W 51069Lume

LED Incredbare equivrespe-4°F).direct2500

513724400

56618


p ALL monththly deal

Rockler® 2" Diameter Wireless Speaker Kit Make a mini wireless speaker that connects to any Bluetooth® device—you build the cabinet in the shape and material of your choice. Use a simple block of wood with a hole drilled in it, or build a hollow cabinet with fancy joinery, or integrate speakers into furniture and other commonplace items. Connects wirelessly to any Bluetooth enabled device. Includes USB cable for charging internal battery. Use a 17/8" hole saw or Forstner bit for the holes, or cut them with a jig saw. No soldering required. 57081 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 29.99 17/8'' Forstner Bit, 3/8'' Shank Drills a precise hole with a flat bottom and clean perimeter. High carbon steel. Perfect diameter for our Wireless Speaker Kit (#57081, sold separately). 51761 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 13.99

VIDEOSEE THE VIDEO AND

GET A FREE PLANrockler.com/speaker

Rockler Shelf Pin Routing Jig Use your router to create clean, precisely spaced shelf pin holes. Creates an exceptionally clean hole. Router base keeps bit perpendicular to the workpiece—important when making holes on both sides of a cabinet partition. 32mm hole spacing and 37mm setback are compatible with Euro cabinet system. Includes guide bushing, which stores onboard. Router bits (sold separately) store in the end of the jig. For 1/4'' shelf pin holes, use our 15/64" router bit (#90011). For 5mm shelf pin holes, use our 3/16" router bit (#90000). 50323 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 34.99

Fence incorporates storage for router bits

Put a shelf pin in the 1/4" or 5mm indexing hole to extend the run for longer cabinets

Included guide bushing stores conveniently on jig

2000 Brighside lstandEnergLED l

59962

130 800-279-4441

New Products


02072018125221

t

8922

7711

7266

7751

007064250971656788484081

32229161

1882

Magnifying LED Work Light

Reduces eye strain and fatigue when performing detailed tasks. Bright, 60-LED 5W light with 3

diopter magnifying glass (0.75X). 18'' gooseneck adjusts with one hand. Clamps easily to tables up to 21/2" thick with included mounting clamp. 71/4"W x 345/8"L overall.

57312 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 59.99

2000-Lumen Universal 4' LED Replacement Tube Bulb Upgrade your old 4' fluorescents to the more reliable, energy-efficient LEDs! No need to replace the fixtures—just swap out the tubes for up to 50,000 hours of bright, white light. No hum and no mercury. Instant-on, even in cold weather. Plastic tube is less prone to breakage. Non-dimmable.

51473 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.99 $799

LED Big Bulbs Replaces any standard bare light bulb. Perfect for finished ceilings where broad light distribution is desired. Shatter-resistant polycarbonate lenses. Long LED life of 25,000 hours. The 4275 lumen bulb is equivalent to a 250W incandescant, uses only 50 watts. The 2570-lumen bulb is equivalent to a 150W incandescant, uses only 30 watts. CCT: 4000K. 59729 2570 Lumens, 4"W x 7"L . . . . . . . . . . . . . . . .$ 24.99

$1999

51069 4275 Lumens, 5"W x 93/4"L . . . . . . . . $ 39.99

$3199

LED Shop Lights with Reflector Shrouds Incredibly bright, efficient lamps replace any standard bare light bulb. Choose from 2500 or 4400 lumens, equivalent to two or three 100W incandescent bulbs, respectively. Instant-on in cold weather (as low as -4°F). Great for obstructed ceilings, like rafters, where direct, focused lighting is desired. 2500 Lumens

51372 9 3/4" Dia. x 53/4"H) . . . . $ 34.99 $2799

4400 Lumens

56618 10 3/4" Dia. x 61/8"H . . .$ 49.99 $3999

Upgrade your old 4' fluorescents with LED!

LED Shop Light Ultra-bright, long-lasting and incredibly energy efficient. Instant on even in cold weather. Ideal solution where task lighting is crucial. LED life of 50,000 hours. Includes two 12' hanging chains, 61/2" pull chain.

53571 5000 Lumens, 4'L . . . . . .$ 49.99 $3999

Linkable LED Shop Lights Onboard outlet and link cord let you link up to five lights of the same series to illuminate large work areas. Diffuser creates soft, pleasing light. Instant on, even in cold weather. Quiet no-hum operation. Replace fluorescent fixtures and you won't have to worry about breakage, mercury leakage or tube disposal. Rated for 40,000 hours or more. 5' main power cord, pull chain switches, hanging chains and 14" link cords included.

Series 1

SerSerSerSerSerSereeriesiesiesies 22222

ssly y.

29.99

3.99

2000-Lumen LED Work Light Bright, efficient lighting wherever you need it—a great side lighting source for sanding and finishing. Scissor stand folds out for support, and doubles as a handle. Energy efficient and extremely durable, thanks to an LED life of 50,000 hours.

59962 . . . . . . . . . . . . . . . . . . . . . . $ 24.99 $1999

5000-Lumen LED Work Lightwith USB Charging Port High-output 5000-lumen LED light illuminates even the dimmest spaces—USB charging port lets you charge and operate your phone or tablet while you work. Rugged stand for stable support. Shatter-resistant polycarbonate lens. Handle and light can be angled up or down as needed.

56715 . . . . . . . . . . . . . . . . . . . . . .$ 79.99 $6399

Series 1 – Linkable LED Lights

56388 4,000 Lumens, 4'L . . . . .$ 49.99 $3999

58486 2,000 Lumens, 2'L . . . . . $ 29.99 $2399

53781 48" Link Cord . . . . . . . . . . . . . .$ 5.99 $479

58374 Two 4'L LED Lights plus 48" Cord . . . . $ 99.99

Series 2 – Linkable LED Lights

56582 7500 Lumens, 4'L . . . . . .$ 79.99 $6399

50867 10,000 Lumens, 4'L . . $ 99.99 $7999

1200-Lumen Cordless LED Work Light with USB Charging Port Cordless light goes wherever you go—USB charging port lets you charge and operate your digital devices as you work. Kickstand folds out for support, and folds flat for transport. Rugged housing with rubber corners. Light can also run off the cord while the battery recharges.

52366 . . . . . . . . . . . . . . . . . . . . . . $ 44.99 $3599

SAVE 20% on LED Shop Lights

131rockler.com



01312018103759

Shop all monthly deals at rockler.com/promotions

Or scan with your smartphone to see them now

Connect with us!Email subscribers enjoy FREE shipping every day on $35+ orders.Sign up at: rockler.com/email

Sale prices valid March 2 through March 29, 2018

l i lid h

Damstom 38" Panel Clamp Sandwiches panels to hold them flat while drying—no more bowing when pressure is applied. Clamps panels from 3/4" thick to a massive 41/2" thick.

51792 Sold Singly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 59.99 $4999 ea

LED Shop Light Ultra-bright, long-lasting and incredibly energy efficient. Instant on even in cold weather. Ideal solution where task lighting is crucial. 4 feet long.

53571 5000 Lumens, 4'L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 49.99 $3999


Kreg Jig HD Pocket Hole System with FREE 125-Pack HD Screws ($19.99 Value!)Supersized, industrial-strength Kreg Jig optimized for working with 2x4 stock and larger. Robust joints are 50% stronger. Portable for job-site use. Big 21⁄2" weather coated #14 screws.

52461 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 78.99 $5999



x 125

Three clamps shown in use

4365 Willow Drive Medina, MN 55340

PRESORTEDSTANDARD

U.S. POSTAGEPAID

ROCKLER

Order 24 hours a day• Online: www.rockler.com • Phone: 1-800-279-4441 6:00 a.m. – 11:00 p.m. Central Time

• Product Information: 1-800-260-9663 8:00 a.m. – 6:00 p.m. M-F Central Time

• FAX: 1-800-865-1229© Copyright 2018 Rockler Woodworking and Hardware

132 8P JK.indd 132132 8P JK.indd 132 2/1/18 1:00 PM2/1/18 1:00 PM


SAVE $5O ON ROCKLER'S ALL TERRAIN MOBILE BASE

Documents

Transcript of SAVE $5O ON ROCKLER'S ALL TERRAIN MOBILE BASE