Safe Locks Price Book - Dormakaba
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of Safe Locks Price Book - Dormakaba
Table of Contents
Limited Warranty 3Terms & Conditions of Sales 4Auditcon 2® Series 7
52/T52 Odering Information 8
252/552 Ordering Information 10
Accessories 12
Parts 13
Cencon® 15Cencon Cash-in-Transit ATM Locking System Ordering Information 16
Software/Accessories/Keys 18
Parts 19
Professional Services & Training 21Product Weights & Measures 22
NOTE: Please refer to dormakaba web site for the current pricebook version.
2 Safe Locks Price List 2022
Limited Warrantydormakaba USA, Inc. warrants to the original purchaser that the product(s) shall be free of defects in material and workmanship for a period of one (1) year from the date of manufacture by dormakaba (complete locks), and sixty (60) days (parts). This warranty applies provided there is compliance with all installation/operating instructions supplied by dormakaba and, provided further, that the product has been subject to normal use without any misuse, negligence, modification, or the occurrence of any accidental damage.
In the event of a defect in materials or workmanship covered by this warranty, the purchaser shall return, at purchaser’s expense, the product to dormakaba for repair or replacement. Repair or replacement shall be at the election of dormakaba. The purchaser’s sole remedy shall be the repair or replacement of the product. UNDER NO CIRCUMSTANCES SHALL dormakaba BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY CONSEQUENTIAL, INCIDENTAL, ECONOMIC, INDIRECT, GENERAL OR SPECIAL DAMAGES. In no event shall dormakaba’s liability exceed the original cost of the product.
This warranty and remedies set forth above are exclusive and in lieu of all others, oral or written, expressed or implied. EXCEPT AS OTHERWISE SPECIFICALLY SET FORTH HEREIN dormakaba DOES NOT MAKE, AND HEREBY DISCLAIMS, ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE OR PURPOSE, AND NON-INFRINGEMENT. No dealer, distributor, agent or employee is authorized to make any modification or addition to this warranty.
Some states do not allow the exclusion or limitation of implied warranties or limitation of liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you.
NOTICE Installation of the product with any unapproved accessory item or product may in validate the dormakaba USA, Inc. Limited Product Warranty.
3Safe Locks Price List 2022
Terms & Conditions of Sale
1. Acceptance. The following Terms and Conditions of sale are applicable to all Quotations, Contract, Purchase Orders, Order Acknowledgement Forms, and sales of Seller’s services and
products, and are the only applicable terms and conditions thereto, except for terms establishing prices, quantities, delivery schedules, terms of payment, invoicing, shipping instructions,
and the identification of the products associated with each transaction. If any conflict exists between the Terms and Conditions and a Quotation, Purchase Order, Order Acknowledgment
form, or sale, these Terms and Conditions shall prevail BY REQUESTING A QUOTATION OF ORDERING ANY PRODUCTS OR SERVICES FROM SELLER, BUYER AGREES TO ALL THE
FOLLOWING TERMS AND CONDITIONS. If a written contract signed by both parties is in existence covering the sale of the goods and services, the terms and conditions of the contract
shall control to the extent they are inconsistent with these Terms and Conditions.
2. Order Procedure. Buyer may or may not request the preparation of a Quotation prior to ordering any products or services from Seller. Buyer then shall place a Purchase Order with Seller.
By placing a Purchase Order, Buyer makes an offer to purchase products or services from Seller pursuant to these Terms and Conditions. Seller, in its discretion, may accept or reject the
Purchase Order. If Seller accepts the Purchase Order, Seller shall issue an Order Acknowledgement Form confirming Buyer’s order. No Purchase Order is binding on Seller unless accepted by
Seller as provided in these Terms and Conditions.
3. Quotations. All Quotations by Seller are subject to change or withdrawal without prior notice to Buyer unless otherwise specifically stated in the Quotation. All resulting Purchase Orders
become effective only if and when approved and accepted in writing by Seller by the issuance of its Order Acknowledgement Form. Seller reserves the right to discontinue manufacture of
any products or change products materials, design, or specifications without notice.
4. Site Requirements.
a. The Quotation is contingent upon all work being performed during normal business hours unless otherwise negotiated and a mutually agreeable schedule. The Quotation is calculated on
one continuous installation engagement based on acceptable site conditions where other dependent scopes have completed preparation for proposed materials (i.e. electrical work, floor
work, adjacent construction). When Buyer has given authorization for work to begin, no other scopes may impede Seller’s ability to complete installation in agreed upon area. Seller
reserves the right to invoice for costs that are incurred due to unacceptable site conditions or delays by others resulting in additional installation visits.
b. Signed acceptance by Buyer of shop drawings and/or submittals shall be interpreted as acceptance that proposed scope is the correct interpretation of construction documents. Any
field verification and/or work required by others as detailed in the submittal will be provided and coordinated by Buyer. Work shall not begin nor shall orders be placed for any projects until
all shop drawings and submittals have been approved in writing by Buyer.
5. Warranty. For a period of twelve (12) months from the date of delivery, Seller warrants only that all products sold pursuant to a Quotation or Purchase Order will conform to the
description in this Price Book and will be free from defects in workmanship and materials. Extended warranties are available for an additional cost. Seller is not responsible for defects or
damages caused by wear and tear, consumable materials, vandalism, fires, storms, floods, acts of God, misuse, abuse or alteration by any company other than Seller. Seller further
warrants that Buyer will receive good and valid title to the products. Any claim on account of nonconforming or defective products or for any other cause whatsoever shall conclusively be
deemed waived by Buyer unless written notice thereof is given to Seller promptly after discovery but no later than sixty (60) days from date of shipment. Seller shall have the right either to
replace or repair any nonconforming or defective products, to refund the purchase price upon return of the products, or to grant a reasonable allowance on account of such nonconformance
or defect Seller’s liability and Buyer’s exclusive remedy for nonconforming or defective products shall be limited solely to replacement, repair, refund, or allowance as Seller may elect. Seller
shall be given reasonable opportunity to investigate all claims and no materials shall be returned to Seller until after inspection and approval by Seller and receipt by Buyer of written
shipping instructions from Seller. Buyer acknowledges and agrees that the remedies set forth in this paragraph are Buyer’s exclusive remedies for the delivery of nonconforming or defective
products.
Additional Warranties
a. No credit will be provided for any work completed by others during warranty term.
b. Warranty work will be performed during normal business hours with our standard response times. Any warranty work taking place beyond normal business hours or with expedited
response time may be billable.
c. Products repaired or replaced under the warranty are warranted only through the remainder of the original warranty period.
DISCLAIMER OF FURTHER WARRANTIES. EXCEPT AS SET FORTH ABOVE, THERE IS NO WARRANTY, REPRESENTATION, OR CONDITION OF ANY KIND, EXPRESS OR IMPLIED
(INCLUDING NO WARRANTY OF MERCHANTABILITY OR FITNESS OF THE PRODUCTS FOR ANY USE CONTEMPLATED BY BUYER) CONCERNING SELLER’S PRODUCTS OR SERVICES
AND NONE SHALL BE IMPLIED BY LAW.
6. LIMITATION OF LIABILITY AND REMEDIES. SELLER SHALL NOT BE LIABLE, AND BUYER WAIVES ALL CLAIMS AGAINST SELLER FOR ANY INCIDENTAL, CONSEQUENTIAL, OR
SPECIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES AND PROFITS EVEN IF SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BUYER’S
EXCLUSIVE REMEDY FOR ANY CAUSE OF ACTION UNDER THESE TERMS AND CONDITIONS IS A CLAIM FOR DAMAGES AND IN NO EVENT WILL DAMAGES OR ANY OTHER RECOVERY
OF ANY KIND AGAINST SELLER EXCEED THE PURCHASE PRICE OF THE SPECIFIC PRODUCTS OR SERVICES AS TO WHICH THE CLAIM IS MADE. SELLER WILL NOT BE LIABLE TO
BUYER FOR ANY LOSS, DAMAGE, OR INJURY TO PERSONS OR PROPERTY RESULTING FROM THE HANDLING, STORAGE, TRANSPORTATION, RESALE, OR USE OF THE PRODUCTS IN
MANUFACTURING PROCESSES, OR IN COMBINATION WITH OTHER SUBSTANCES, OR OTHERWISE.
4 Safe Locks Price List 2022
Terms & Conditions of Sale Continued
7. Intellectual Property Indemnification. (a) Seller agrees to defend, indemnify and hold Buyer harmless against any claims, costs, damages, liability and expenses resulting from actual or
alleged patent, trademark, or copyright infringement, misappropriation of confidential information, or violation of any other intellectual property right, domestic or foreign, in the selling
or use of any part or product that is owned by Seller and that pertains to the subject matter of a Quotation, Purchase Order, or sale of products or services (provided that the product is
not modified in anyway by Buyer or any other party, and that the product is used in the manner intended by Seller). If a suit or claim results in any injunction or any other order that would
prevent Seller from supplying any product falling under a Quotation, Purchase Order, or sale, or if the result of such a suit or claim would, in the reasonable opinion of Seller, otherwise
cause Seller to be unable to supply such products, Seller shall have the right, at its option, if it so chooses, to do one or more of the following: (i) secure an appropriate license to permit
Seller to continue supplying the products to Buyer; (ii) modify the relevant product so that it becomes non-infringing, provided that any modification does not cause any material change
to the operation or performance of the product; or (iii) replace the relevant product with a non-infringing but practically equivalent product. (b) Buyer agrees to defend, indemnify, and
hold Seller harmless against any claims, costs, damages, liability and expenses resulting from actual or alleged patent, trademark, or copyright infringement, misappropriation of
confidential information, or violation of any other intellectual property right, domestic or foreign, in the making, using or selling of any product or using any process that is owned by Buyer
or is designed or specified by Buyer and that pertains to the subject matter of a Quotation, Purchase Order, or sale.
8. Ownership of Inventions. All drawings, know-how, designs, confidential information, and the like disclosed to Buyer by Seller and all rights therein will remain the property of Seller.
Buyer shall have no claim to, ownership interest in, no license to, or no rights to any information provided or communicated by Seller.
9. Lead Times. If applicable, lead times are based on standard requirements by factory to provide materials proposed. Ship dates will be provided as estimate only once order is placed
with the factory. Adequate packaging will be provided for any normal shipping circumstance such that materials will be protected and labeled as required. Special packaging may be
provided for an additional expense. Shipping will be cost effective unless expedited fees are accepted by Buyer. If materials are to be provided to job site or Buyer location, Seller will make
an informed decision as to the best instruction to provide the shipping company. If materials are not required to have direct delivery, materials will be brought to branch for pickup by
Buyer. All freight terms shall be FOB. Any claims for damage in transit or lost freight, receiving, and inspection of materials is the responsibility of Buyer. It is a requirement of Buyer to
inspect and review all materials prior to accepting shipment.
10. Title/Risk of Loss. All products shall be shipped FOB Seller’s manufacturing facility to Buyer’s designated delivery location. Unless otherwise agreed by the parties, Seller shall select
the method of and carrier for the products. Seller reserves the right to ship items in a single or in multiple shipments. Title and risk of loss to products ordered passes to Buyer upon
delivery of the products to the freight carrier. Unless mutually agreed upon in writing, shipping dates are approximate and are based upon prompt receipt of all necessary information.
11. Prices. Quoted price is valid for 90 days. Seller reserve the right to revise quotations after the 90 days. All accepted Purchase Orders are subject to Seller’s price in effect at time of
shipment. Buyer shall be responsible for any increase in freight rates or transportation charges occurring after Seller prepared the Order Acknowledgment Form. on the Order
Acknowledgment Form. Buyer shall pay to Seller in addition to the purchase price the amount of all fees, duties, licenses, and all sales, use, privilege, occupation, excise, or other taxes,
federal, state, local, or foreign which Seller is required to pay or collect in connection with products or services sold to Buyer.
12. Payments. Unless otherwise agreed in writing between the parties, all Seller’s invoices are payable within thirty (30) days of their date. Time is of the essence. Interest on past due
amounts will be assessed at the rate of 1.5% per month (18% per annum), or the maximum allowable by law.
Seller reserves the right to full payment upon completion of work unless credit is pre-established. For any work requiring materials purchase or scheduling, a 50% deposit is due at time of
proposal acceptance. Twenty percent (20%) of the Quotation, Purchase Order value may be billed after job award. Joint check agreements may be requested at the discretion of Seller.
If payment is outstanding for any one account, work may be stopped and outstanding orders cancelled until account is restored. Should Seller require the use of collection, attorney's
fees, or fees for insufficient funds, Buyer agrees that these funds will be repaid to Seller. Seller retains the right to file a lien against all or part of the property being improved. Seller
reserves the right to add a 2.5% charge if invoice becomes delinquent beyond terms.
13. Cancellation. In the event a Buyer’s Purchase Order and the issuance of an Order Acceptance Form is cancelled, it will be subject to standard 20% restocking fees, cancellation fees,
engineering fees, materials & freight costs incurred, and administrative fees. Standard cancellation is 20% of order as long as no materials have been ordered. Should Buyer release
material orders, Buyer will be liable for that portion of the job and 20% of the remaining amount of work unperformed/unordered.
14. Storage. If applicable, Seller reserves the right to implement a storage fee if delivery is delayed after agreed upon date. Should project timeline require storage of materials, Seller
reserves the right to bill for those materials at the time they have been received at a Seller location, Buyer location, or at job site. Certificate of insurance for stored materials can be
provided to Buyer upon request. Signed acceptance by Buyer of shop drawings and/or submittals shall be interpreted as acceptance that proposed scope is the correct interpretation of
construction documents. Any field verification and/or work required by others as detailed in the submittal will be provided and coordinated by Buyer.
15. Insolvency. Seller may, at any time or times, suspend performance of any order or require payment in cash, security, or other adequate assurance satisfactory to Seller when, in Seller’s
opinion, the financial condition of Buyer or other grounds for insecurity, including the filing of a petition for bankruptcy, warrant such action.
5Safe Locks Price List 2022
Terms & Conditions of Sale Continued
16. Force Majeure. Seller shall not be liable for any delay in fulfilling any order due to (a) fires, floods, strikes, or other labor disputes, accidents to machinery, acts of sabotage, riots,
precedence or priorities granted at the request or for the benefit, directly or indirectly, of the federal or any state government or any subdivision or agency thereof, delays in
transportation or lack of transportation facilities, restrictions imposed by federal or state legislation or rules of regulations thereunder; or (b) any cause beyond the control of Seller.
17. Ownership of Equipment. Unless otherwise agreed in a writing, all material, equipment, facilities, and special tooling, which term includes but is not limited to jigs, dies, fixtures, molds,
patterns, special taps, special gauges, special test equipment, and manufacturing aids and replacements thereof, used in the manufacture of the products covered by any order shall
remain the property of Seller. Any material, tooling, and equipment furnished to Seller by Buyer shall be and remain the personal property of Buyer with the title to and right of possession
remaining in Buyer.
18. Confidential Information. All information furnished or made available by Seller to Buyer in connection with a transaction shall be held in confidence by Buyer. Buyer agrees not to use
such information or disclose such information to others without Seller’s prior written consent. The obligations of this paragraph does not apply to any information which (a) at the time of
disclosure was, or thereafter becomes, generally available to the public by publication or otherwise through no breach by Buyer of any obligation herein, (b) Buyer can show by written
records was in Buyer’s possession prior to disclosure by the disclosing party, (c) is legally made available to Buyer by or through a third party having no direct or indirect confidentiality
obligation to Seller with respect to such information, (d) was independently developed by Buyer without use of any of Seller’s confidential information, or (e) is required to be disclosed
pursuant to applicable law.
19. Waiver. No waiver by Seller of any of these Terms and Conditions shall be effective unless explicitly set forth in writing and signed by Seller. No failure to exercise, or delay in exercising,
any rights, remedy, power, or privilege arising from these Terms and Conditions shall operate or be construed as a waiver thereof, nor shall any single or partial exercise of any right,
remedy, power, or privilege hereunder preclude any other or further exercise thereof or the exercise of any other right, remedy, power or privilege.
20. Assignment. No assignment of any right or interest or delegation of any obligation or performance of Buyer under this order may be made without the prior written consent of Seller.
Any attempted assignment or delegation will be wholly void and totally ineffective for all purposes.
21. Choice of Law. All sales, agreements for sale, offers to sell, proposals, acknowledgments and contracts of sale, including, but not limited to, Purchase Orders accepted by Seller, shall
be considered a contract under the laws of the State of Delaware, and the rights and duties of all persons, and the construction and effect of all provisions hereof, shall be governed by
and construed according to the laws of the State of Delaware.
22. Integration Clause. These Terms and Conditions constitute the entirety of terms and conditions, except as set forth in paragraph one, governing the sale and purchase of products and
services sold by Seller. No modification of these Terms and Conditions shall be of any force or effect unless in writing and signed Seller and Buyer. Buyer may desire to utilize its own form
of acknowledgment or acceptance of these Terms and Conditions. However, the use of any such form shall be for convenience only. No modification of these Terms and Conditions shall be
affected by the acknowledgment or acceptance of purchase orders, shipping instruction forms, bills of lading or any other document containing terms or conditions at variance with or in
addition to those set forth herein, all such varying or additional terms being hereby objected to and rejected by Seller and deemed to be waived by Buyer.
6 Safe Locks Price List 2022
Commercial Safe Locks
Auditcon® 2 SeriesCommercial Safe Locks 52 t52 252 552 Features and Options
7Safe Locks Price List 2022
Example
Model Description LIN (Lock Identification Number) Price052S* 52 Self-Powered 052Sxxxxxxxxxxx $ 335.2905WS* 52 Self-Powered Swing Bolt 05WSxxxxxxxxxxx $335.29T52S T52 Self-Powered T52Sxxxxxxxxxxx $376.73T5WS T52 Self-Powered Swing Bolt T5WSxxxxxxxxxxx $376.73T52A T52 Battery Assist T52Axxxxxxxxxxx $389.79T5WA T52 Battery Assist Swing Bolt T5WAxxxxxxxxxxx $389.79
Housing/Display Description LIN (Lock Identification Number) PriceRN Round xxxxRNxxxxxxxxx standardRY Round, Time Delay Display Compatible xxxxRYxxxxxxxxx add $19.03VN Vertical xxxxVNxxxxxxxxx standardVY Vertical, Time Delay Display Compatible xxxxVYxxxxxxxxx add $19.03
Remote Time Delay Display Unit Sold Separately
Bolt
10N Dead Bolt, Non-Sensor xxxxxx10Nxxxxxx standard dead bolt
10Y Dead Bolt, Sensor xxxxxx10Yxxxxxx add $32.38
20N Dead Bolt, Non-Sensor, 10-32.5 (2X) Tapped Holes xxxxxx20Nxxxxxx add $8.25
23N Dead Bolt, Non-Sensor, M4-7 x 15mm (2X) Tapped Holes xxxxxx23Nxxxxxx add $8.25
75N Swing Bolt, Non-Sensor xxxxxx75Nxxxxxx standard swing bolt
Relocker/Case Cover4 Dead Bolt, No Relocker Plate xxxxxxxxx4xxxxx no add5 Dead Bolt, Universal Relocker Plate xxxxxxxxx5xxxxx no add8 Swing Bolt, No Relocker Plate xxxxxxxxx8xxxxx no add9 Swing Bolt, Universal Relocker Plate xxxxxxxxx9xxxxx no add
Auditcon 2 SeriesModels 52/T52
0 5 2 S V N 1 0 N 4
MODELPOWER SOURCE
BOLTHOUSING DISPLAY
RELOCKERCASE COVER
COUNTRYCODE
DOOR CABLE MEASUREMENT
DIALLABEL
INSTALL PACKAGING
Vertical 52/T52
Round 52/T52
* available with “Housing/Display” RN or VN only
8 Safe Locks Price List 2022
Auditcon® 2 Series locks packed (10) per master carton. Example
Door Measurement Description LIN (Lock Identification Number) PriceDead Bolt (spindled) - door thicknessA Up to 1" (25.4 mm) Door xxxxxxxxxxAxxxx no addB Up to 3.5" (88.9 mm) Door xxxxxxxxxxBxxxx standardC Up to 9" (228.6 mm) Door xxxxxxxxxxCxxxx no addD Up to 5" (127 mm) Door xxxxxxxxxxDxxxx no addE Up to 15" (381 mm) Door xxxxxxxxxxExxxx no addF Up to 7" (177.8 mm) Door xxxxxxxxxxFxxxx no add
Swing Bolt (Non-Spindled) Cable Length
Description LIN (Lock Identification Number) Price
L 12" (304.8 mm) xxxxxxxxxxLxxxx no addM 18" (457.2 mm) xxxxxxxxxxMxxxx standardN 30" (762 mm) xxxxxxxxxxNxxxx add $15.35P 48" (1219.2 mm) xxxxxxxxxxPxxxx add $17.61Q 24" (609.6 mm) xxxxxxxxxxQxxxx no addR 36" (914.4 mm) xxxxxxxxxxRxxxx add $17.61Country CodeE †United States (UL/VdS/DNV/EN 1300) xxxxxxxxxxxExxx standardS* †Spanish (UL/VdS/DNV/EN 1300) xxxxxxxxxxxSxxx no addI* †Italian (UL/VdS/DNV/EN 1300) xxxxxxxxxxxIxxx no addG* †German (UL/VdS/DNV/EN 1300) xxxxxxxxxxxGxxx no addF* †France (UL/VdS/DNV/EN 1300) xxxxxxxxxxxFxxx no addU* †United Kingdom (UL/VdS/DNV/EN
1300) xxxxxxxxxxxUxxx no addD* †Sweden (UL/VdS/DNV/EN 1300) xxxxxxxxxxxDxxx no add
* Must select “Dial Label” D
Dial LabelA Black xxxxxxxxxxxxAxx standardB Black, No Logo xxxxxxxxxxxxBxx no addC No Label xxxxxxxxxxxxCxx no addD †Tamper Evident xxxxxxxxxxxxDxx add $8.25
† shipped on all Country Codes, except “E” at no additional cost
Install1 Standard Screws xxxxxxxxxxxxx1x standard2 Metric Screws xxxxxxxxxxxxx2x no add
PackagingA Distributor (Individual) xxxxxxxxxxxxxxA standardB OEM (Bulk) xxxxxxxxxxxxxxB no add
Auditcon 2 SeriesModels 52/T52
MODELPOWER SOURCE
BOLTHOUSING DISPLAY
RELOCKERCASE COVER
COUNTRYCODE
DOOR CABLEMEASUREMENT
DIALLABEL
INSTALL PACKAGING
9Safe Locks Price List 2022
Example
Model Description LIN (Lock Identification Number) Price252S 252 Self-Powered 252Sxxxxxxxxxxx $ 396.8625WS 252 Self-Powered Swing Bolt 25WSxxxxxxxxxxx $ 396.86252A 252 Battery Assist 252Axxxxxxxxxxx $ 396.8625WA 252 Battery Assist Swing Bolt 25WAxxxxxxxxxxx $ 396.86552A 552 Battery Assist 552Axxxxxxxxxxx $ 834.9455WA 552 Battery Assist Swing Bolt 55WAxxxxxxxxxxx $ 834.94
Housing/Display Description LIN (Lock Identification Number) PriceRN Round xxxxRNxxxxxxxxx standardRY Round, Time Delay Display Compatible xxxxRYxxxxxxxxx add $19.03VN Vertical xxxxVNxxxxxxxxx standardVY Vertical, Time Delay Display Compatible xxxxVYxxxxxxxxx add $19.03
Remote Time Delay Display Unit
Bolt
10N Dead Bolt, Non-Sensor xxxxxx10Nxxxxxx standard dead bolt
10Y Dead Bolt, Sensor xxxxxx10Yxxxxxx10Z Dead Bolt, Sensor 36 Inch xxxxxx10Zxxxxxx
20N Dead Bolt, Non-Sensor, 10-32.5 (2X) Tapped Holes xxxxxx20Nxxxxxx
23N Dead Bolt, Non-Sensor, M4-7 x 15mm (2X) Tapped Holes xxxxxx23Nxxxxxx
75N Swing Bolt, Non-Sensor xxxxxx75Nxxxxxx standard swing bolt
75Y Swing Bolt, Sensor xxxxxx75Yxxxxxx $32.40Relocker/Case Cover4 Dead Bolt, No Relocker Plate xxxxxxxxx4xxxxx no add5 Dead Bolt, Universal Relocker Plate xxxxxxxxx5xxxxx no add8 Swing Bolt, No Relocker Plate xxxxxxxxx8xxxxx no add9 Swing Bolt, Universal Relocker Plate xxxxxxxxx9xxxxx no add
Auditcon 2 SeriesModels 252/552
Vertical 252/552
Round 252/552
2 5 2 S V N 1 0 N 4
MODELPOWER SOURCE
BOLTHOUSING DISPLAY
RELOCKERCASE COVER
COUNTRYCODE
DOOR CABLEMEASUREMENT
DIALLABEL
INSTALL PACKAGING
10 Safe Locks Price List 2022
add $32.38add $8.25
add $8.25
add $8.25
Auditcon® 2 Series locks packed (10) per master carton. Example
Door Measurement Description LIN (Lock Identification Number) PriceDead Bolt (spindled) - door thicknessA Up to 1" (25.4 mm) Door xxxxxxxxxxAxxxx no addB Up to 3.5" (88.9 mm) Door xxxxxxxxxxBxxxx standardC Up to 9" (228.6 mm) Door xxxxxxxxxxCxxxx no addD Up to 5" (127 mm) Door xxxxxxxxxxDxxxx no addE Up to 15" (381 mm) Door xxxxxxxxxxExxxx no addF Up to 7" (177.8 mm) Door xxxxxxxxxxFxxxx no add
Swing Bolt (Non-Spindled) Cable Length
Description LIN (Lock Identification Number) Price
L 12" (304.8 mm) xxxxxxxxxxLxxxx no addM 18" (457.2 mm) xxxxxxxxxxMxxxx standardN 30" (762 mm) xxxxxxxxxxNxxxx add $15.35P 48" (1219.2 mm) xxxxxxxxxxPxxxx add $17.61Q 24" (609.6 mm) xxxxxxxxxxQxxxx no addR 36" (914.4 mm) xxxxxxxxxxRxxxx add $17.61Country CodeE †United States (UL/VdS/DNV/EN 1300) xxxxxxxxxxxExxx standardS* †Spanish (UL/VdS/DNV/EN 1300) xxxxxxxxxxxSxxx no addI* †Italian (UL/VdS/DNV/EN 1300) xxxxxxxxxxxIxxx no addG* †German (UL/VdS/DNV/EN 1300) xxxxxxxxxxxGxxx no addF* †France (UL/VdS/DNV/EN 1300) xxxxxxxxxxxFxxx no addU* †United Kingdom (UL/VdS/DNV/EN
1300) xxxxxxxxxxxUxxx no addD* †Sweden (UL/VdS/DNV/EN 1300) xxxxxxxxxxxDxxx no add
* Must select “Dial Label” D
Dial LabelA Black xxxxxxxxxxxxAxx standardB Black, No Logo xxxxxxxxxxxxBxx no addC No Label xxxxxxxxxxxxCxx no addD †Tamper Evident xxxxxxxxxxxxDxx add $8.25
† shipped on all Country Codes, except “E” at no additional cost
Install1 Standard Screws xxxxxxxxxxxxx1x standard2 Metric Screws xxxxxxxxxxxxx2x no add
PackagingA Distributor (Individual) xxxxxxxxxxxxxxA standardB OEM (Bulk) xxxxxxxxxxxxxxB no add
Auditcon 2 SeriesModels 252/552
2 5 2 S V N 1 0 N 4 A E A 1 A
MODELPOWER SOURCE
BOLTHOUSING DISPLAY
RELOCKERCASE COVER
COUNTRYCODE
DOOR CABLEMEASUREMENT
DIALLABEL
INSTALL
11Safe Locks Price List 2022
Part # Package Qt. Description Price307025 1 Remote Time Delay Display Unit $246.15301040 1 Duress Alarm Interface Kit $116.96301101 1 Auditcon 2 Series Software Implementation Package* $301.23
301102 1Auditcon 2 Series Software Upgrade Package** (for previous Audit Only software users or operating system† upgrade)
$157.85
202021 1 SA Key (red) for data upload/download $53.26202270 1 B Key (green/teal) for uploading date/time into Model 552 $50.72202124 1 Serial Adapter for 2-port Key Reader $66.29212009 1 Key Reader, 2-port $90.30203286 1 USB Adapter for 2-port Key Reader $66.28305301 20 Universal Relocker Plate $88.58104035 1 Auditcon Series Display Stand (Round) $101.00314006 1 Auditcon Series Display Stand (Vertical) $101.00
* Includes Software, SA key, key reader, and USB key reader adapter.**Includes Software and USB key reader adapter.†Consult Technical Support for currently supported operating systems.
NOTE: Minimum order amount per shipment is $100.00 net.
Auditcon 2 SeriesAccessories
12 Safe Locks Price List 2022
Part # Package Qt. Description PriceDial Labels311200 20 Dial Label, Vertical, Kaba Logo $54.22311201 20 Dial Label, Vertical, Tamper-Evident $81.48301200 20 Dial Label, Round, Kaba Logo $54.22301201 20 Dial Label, Round, Tamper-Evident $81.48
Front housing, vertical311202 1 Mounting Plate/Keypad/Generator Assembly, TDD
Compatible $273.39311207 5 Front Cover, 52/T52 $76.67311203 5 Front Cover, 252/552 $76.67311204 10 Dial and Label $96.83311101 50 Retainer Clip $42.59
Front housing, round
301202 1 Mounting Plate/Dial/Generator Assembly, Label, TDD Compatible $260.34
301203 1 Keypad and Label $96.83
Installation kits, dead bolt
311205 10 Install Kit, Vertical (10 Standard Screws, Tape, Lube, Cable Shields, Clip) $88.58
311206 10 Install Kit, Vertical (10 Metric Screws, Tape, Lube, Cable Shields, Clip) $108.29
301216 10 Install Kit, Round (7 Standard Screws, Tape, Cable Shields) $79.22301217 10 Install Kit, Round (7 Metric Screws, Tape, Cable Shields) $99.09
Installation kits or swing bolt
361206 10 Install Kit, Vertical (9 Standard Screws, Lube, Spacers, Cable Shields, Spindle) $75.52
361207 10 Install Kit, Vertical (9 Metric Screws, Lube, Spacers, Cable Shields, Spindle) $93.76
361204 10 Install Kit, Round (5 Standard Screws, Cable Shields) $61.44361205 10 Install Kit, Round (5 Metric Screws, Cable Shields) $84.32
Lock case, dead bolt, standard (10N)301204* 1 52 $191.36301205* 1 T52 $233.37301206* 1 252 $438.05301207** 1 552 $546.79
*Non-battery assist**Battery assist
Auditcon 2 SeriesParts
13Safe Locks Price List 2022
Part # Package Qt. Description PriceLock case, dead bolt, metric tapped holes (23N) 301208* 1 52 $198.44301209* 1 T52 $239.61301210* 1 252 $444.02301211** 1 552 $552.75*Non-battery assist**Battery assist
Lock case, swing bolt, standard (75N)351100* 1 52 $191.36351101* 1 T52 $227.41351102* 1 252 $438.05351103** 1 552 $546.79
*Non-battery assist**Battery assist
Cable361208 10 Pack Swing Bolt Cable 18" (457.2mm) $109.30361209 10 Pack Swing Bolt Cable 30" (726mm) $143.37301214 10 Dead Bolt Cable, 3.5" (88.9 mm) Door $96.83301215 10 Dead Bolt Cable, 9.0" (228.6 mm) Door $109.30301218 10 Dead Bolt Cable, 15.0" (381 mm) Door $124.07
Spindle/Tube, dead bolt 301212 10 Dead Bolt Spindle, 9.0" (228.6 mm) Door $124.07301213 10 Dead Bolt Tube, 9.0" (228.6 mm) Door $27.26301219 10 Dead Bolt Spindle, 15.0" (381 mm) Door $164.10301220 10 Dead Bolt Tube, 15.0" (381 mm) Door $42.59
Auditcon 2 SeriesParts
14 Safe Locks Price List 2022
Example
Model/Power Description LIN (Lock Identification Number) PriceCSD2 Non-Shunt, Gen2 Self-Powered CSD2xxxxxxxxxxx $1,030.84CSS2 Alarm Shunt, Gen2 Self-Powered CSS2xxxxxxxxxxx $1,141.09Swing Bolt*CSLW Cencon Standard Lock, Swing Bolt CSLWxxxxxxxxxxx $920.59
Housing/Display Description LIN (Lock Identification Number) PriceKU Keypad Up xxxxKUxxxxxxxxx standardKI Keypad Inverted xxxxKIxxxxxxxxx add $54.02KD Keypad Down xxxxKDxxxxxxxxx no addSwing BoltVY Vertical Display xxxxVYxxxxxxxxx no add
Bolt005 M4-.7 x 15mm (2X) Tapped Dead Bolt xxxxxx005xxxxxx no add006 10/32 x .563 (2X) Tapped Dead Bolt xxxxxx006xxxxxx standard007 10/32 x .500 (2X) Tapped Dead Bolt xxxxxx007xxxxxx add $31.97Swing Bolt75Y Swing Bolt, Standard xxxxxx75Yxxxxxx no add
Relocker/Case Cover7 No Relocker Plate (Gen2) xxxxxxxxx7xxxxx standard9 Relocker Plate xxxxxxxxx9xxxxx $12.14Swing Bolt2 No Relocker Plate (SWB) xxxxxxxxx2xxxxx standard
Door MeasurementC 1.04" (26.3 mm) Door xxxxxxxxxxCxxxx $5.51D 1.13" (28.6 mm) Door xxxxxxxxxxDxxxx $5.51E 1.276” (32.4 mm) Door xxxxxxxxxxExxxx $5.51G 1.74" (44.3 mm) Door xxxxxxxxxxGxxxx standardH 2.17" (55 mm) Door xxxxxxxxxxHxxxx standardJ 3.70" (94 mm) Door xxxxxxxxxxJxxxx $5.51L 4.45" (113 mm) Door xxxxxxxxxxLxxxx $33.08M 5.12" (130 mm) Door xxxxxxxxxxMxxxx $55.13N 9.84" (250 mm) Door xxxxxxxxxxNxxxx add $110.25P 15.75" (400 mm) Door xxxxxxxxxxPxxxx add $297.68Y 0.449" (11.4mm) Door xxxxxxxxxxYxxxxSwing BoltA Up to 5.88" (149 mm) Door xxxxxxxxxxAxxxx no add
Cencon Cash-in-Transit/ATM
Locking System
C S D 2 K U 0 0 6 7 G
MODELPOWER SOURCE
BOLTHOUSING DISPLAY
RELOCKERCASE COVER
COUNTRYCODE
DOOR CABLE MEASUREMENT
DIALLABEL
INSTALL PACKAGING
Keypad Up KU
Swing BoltKeypad Inverted KI
Keypad Down KD
*Interconnect Box Required.
16 Safe Locks Price List 2022
Country Code DescriptionLIN (Lock Identification Number)
Price
E United States (UL/ULC) xxxxxxxxxxxExxx standardU Universal (UL/ULC/VdS/DNV/EN 1300/CE) xxxxxxxxxxxUxxx add $13.23Swing BoltU Universal (UL/ULC/VdS/DNV/EN1300/CE xxxxxxxxxxxUxxx standard
Dial LabelB Silver (Gen2) xxxxxxxxxxxxBxx standardSwing BoltA Tamper Evident xxxxxxxxxxxxAxx standard
Install1 Standard & Metric Screws xxxxxxxxxxxxx1x add $7.442 Standard Screws xxxxxxxxxxxxx2x standard3 Metric Screws xxxxxxxxxxxxx3x no add4 Standard, KI for Factory xxxxxxxxxxxxx4x no add5 Standard, KI for Field, Saw xxxxxxxxxxxxx5x add $14.89Swing Bolt1 Metric Screws xxxxxxxxxxxxx1x no add2 Standard Screws xxxxxxxxxxxxx2x no add
PackagingA Distributor (Individual) xxxxxxxxxxxxxxA standardSwing BoltA Distributor xxxxxxxxxxxxxxA standard
Cencon locks packed (10) per master carton.
CenconCash-in-Transit/ATM Locking SystemExample
C S D 2 K U 0 0 6 7 G E B 1 A
MODELPOWER SOURCE
BOLTHOUSING DISPLAY
RELOCKERCASE COVER
COUNTRYCODE
DOOR CABLE MEASUREMENT
DIALLABEL
INSTALL PACKAGING
17Safe Locks Price List 2022
Software Components Part # Description NET Price201190 Cencon Single Server Software and License (Choose one or more of the modes below) $655.99201191 Bank Mode License with Two Green/Teal B Keys $325.24201192 FLM Mode License with Two Blue F Keys $1,096.99201193 Route Mode License with Two Yellow R Keys $1,758.49202202 Install Key, Orange Hourglass (Flat) Shape, Customer-Coded (ships separately) $49.62201181 Dispatch Pack (USB Key Box & USB Cable), Customer-Coded $655.99201184 Dispatch Pack for Servers (USB Card with Bracket & USB Cable), Customer-Coded $655.99201196 CenTran 5, Single Server Software License $4,404.49207455 Cencon Key Box Agent Software $325.24
KeysPart # Description Category Color Shape List Price202020 F Key First Line Maintenance Personnel Lock User (blue) Teardrop (Bent) $50.72202022 R Key Route Mode Personnel Lock User (yellow) Teardrop (Bent) $50.72202270 B Key Bank Mode Personnel Lock User (green/teal) Teardrop (Bent) $50.72202227 L Key Logon to Cencon (D, S, SS) Software User (black) Hourglass (Flat) $50.72212030 A Key Additional Logon to KMU Software User (orange) Teardrop (Bent) $53.26202021 SA Key Supervisor Audit Data Transfer (red) Teardrop (Bent) $53.26202226 CS Key Clock Set (Gen2 Lock + Cencon 4) Data Transfer (white) Hourglass (Flat) $82.69202224 RS Key Re-Sync (Gen2 Lock + Cencon 4) Data Transfer (dark grey) Hourglass (Flat) $50.72
Software AccessoriesPart # Description List Price205475 Cable Lock for Physically Securing USB Key Box $64.22203325 Replacement USB Cable, 2 Meter Length $52.00
CenconSoftware/Accessories/Keys Software
18 Safe Locks Price List 2022
Cencon Gen2Part # Package Qty. Description Price201183 1 Installed Gen2 Lock (CSD2KU0067QEB2A) on Light Grey Display Stand $1,069.43205518 1 Thin Plastic Stand with Light Grey Sticker for Displaying Lock $46.31104035 1 Heavy Black Plastic Stand for Displaying Lock $101.00105061 1 Dial Nameplate Decal for Gen1 (Black) $3.04205498 1 Dial Nameplate Decal for Gen2 (Silver) $3.04201180 1 Gen2 Cables, 4-wire, for Door Contact & Remote Disable Signals $13.23201175 1 Back Cover, w/ Electronics Card, Non-Shunted, Screws $619.61201176 1 Back Cover, w/ Electronics Card, Shunt Alarm, Screws $728.75201197 1 Back Cover, w/ Electronics Card, Relocker Non-Shunted $641.66201198 1 Back Cover, W Electronics Card, Relocker, Shunt $750.81201189 1 Interconnect Box Deadbolt $165.38
237014 1 Interconnect Box, Swing Bolt, No USB Connection, Duress, Alarm Shunt, Bolt Switch Door Contact, 12" Cables $220.50
237012 1 Interconnect Box, Swing Bolt, USB Connection, Duress, Alarm Shunt, Bolt Switch Door Contact, 12" Cables $479.59
Items Used for Both Gen1 and Gen2 Cencon Lock204210 1 Dial Replacement Kit with Spindle for 130mm (5.12") Door Thickness $43.00201290 1 Dial Replacement Kit with No Spindle $27.57201160 10 Spindle w/Screw, 44.3 mm (1.74") Door Thickness $82.69201161 10 Spindle w/Screw, 55 mm (2.17") Door Thickness $93.72201162 10 Spindle w/Screw, 113 mm (4.45") Door Thickness $115.77201163 10 Spindle w/Screw, 130 mm (5.12") Door Thickness $137.82201164 10 Spindle w/Screw, 250 mm (9.84") Door Thickness $170.89201139 1 Front Housing Assembly, with Keypad Up (KU) Standard $355.01201140 1 Front Housing Assembly, with Keypad Inverted (KI) $409.03201136 1 Front Housing Assembly, with Keypad Down (KD) $355.01201152 1 Cable Replacement Kit, 55 mm (2.17") Door Thickness $49.62201153 1 Cable Replacement Kit, 130 mm (5.12") Door Thickness $66.15201154 1 Cable Replacement Kit, 250 mm (9.84") Door Thickness $121.28201155 1 Mounting Plate $48.51
NOTE: Minimum order amount per shipment is $100.00 net.
CenconParts
19Safe Locks Price List 2022
Items Used for Both Gen1 and Gen2 Cencon Lock (continued) Part # Package Qty. Description Price201165 10 Cable-Protecting Tube, 55 mm (2.17") Door $18.75201166 10 Cable-Protecting Tube, 130 mm (5.12") Door $30.87201167 10 Cable-Protecting Tube, 250 mm (9.84") Door $74.97201173 1 Cable, Spindle & Tube Kit for up to 400mm (15.75") Door Thickness $396.90201174 1 Tube & Spindle for up to 55 mm (2.17") Door Thickness $19.85201143 1 Lock Case w/ Cable, 55 mm Door (No Back Cover) 006 Bolt $356.11201144 1 Lock Case w/ Cable, 55 mm Door (No Back Cover) 005 Bolt (Metric) $356.11201145 1 Lock Case w/ Cable, 130 mm Door (No Back Cover) 007 Bolt $405.72201146 1 Lock Case w/ Cable, 130 mm Door (No Back Cover) 006 Bolt $405.72201147 1 Lock Case w/ Cable, 130 mm Door (No Back Cover) 005 Bolt (Metric) $405.72201148 1 Lock Case w/ Cable, 250 mm Door (No Back Cover) 006 Bolt $493.92201149 1 Lock Case w/ Cable, 250 mm Door (No Back Cover) 005 Bolt (Metric) $493.92201150 1 Lock Case, (No Back Cover and No Cable) 006 Bolt $317.52201151 1 Lock Case, (No Back Cover and No Cable) 005 bolt (Metric) $317.52201156 10 Drive Cam $126.79204004 1 Install Kit (24 Standard/Metric Screws, etc., Dial Clip/Washer) $16.54204247 1 Install Kit (16 Standard Screws, etc., Dial Clip/Washer) $13.23204248 1 Install Kit (12 Metric Screws, etc., Dial Clip/Washer) $13.23201158 50 Dial Clip, Triangular $80.49201159 50 Dial Spacer/Washer $120.18201157 50 Zebra Connector + Housing $358.32204016 1 Spare Parts Kit w/Keypad Up (55 mm Spindle, Cam, Dial Parts) $400.21107061 1 Change Key $14.34201168 1 Alarm Cable, Rainbow-colored, w/ 9-pin Connector, 48.5" long $19.85
NOTE: Minimum order amount per shipment is $100.00 net.
CenconParts
20 Safe Locks Price List 2022
Part # Package Qty. Duration Class Fee Minimum Class SizeCEN-0500 Cencon (at dormakaba) 2 day $1,653.75/
day 4
CEN-0501 Cencon (Off-site)* 2 day $1,653.75/day 4
* Course fee plus expenses. Expenses may include instructor's travel, lodging, meals, shipping and any other cost relatedto off site instruction.
Professional Services Training
Repair Price US$Hardware Repair Kaba Auditcon 252 $174.20Kaba Auditcon 552 $300.98Kaba Cencon $404.62
Reset Services Cencon Card Reset $185.22Cencon PCIO Card Reset - Key Box $363.82LA GARD Electronic Reset $92.61
Technical Support FeesStandard Support Hours 8:00 a.m.- 5:00 p.m. Monday - Friday
Non-Standard Technical Support Request a Quote for Support Activities. $75 per 1/4 Hour
* Support and Repair Service for End of Life Products are available for a limited time.
NOTE: Dormakaba will not reset Time Locks. Lock Owner is responsible for removing Time Lock before the Logic Module is sent in for reset.
21Safe Locks Price List 2022
AUDITCON 2 Series Single box 2.6 lbs. (Round) 10" x 7" x 2 1/2"
2.2 lbs. (Vertical) 10" x 7" x 2 1/2"10-pack box 26 lbs. (Round) 20" x 13" x 8"
2.2 lbs. (Vertical) 20" x 13" x 8"
CENCONSingle box 3 lbs. 10" x 7 1/4" x 4 1/4"10-Pack box 25-27 lbs. 22" x 15" x 11"
Product Weights & Measures
22 Safe Locks Price List 2022