- CCS University

11
t A Project Report On <PROJECT TITLE> Submitted in partial fulfillment of the requirement for the award of the degree of BACHELOR OF TECHNOLOGY In BRANCH NAME By: STUDENT NAME ( Roll no.) STUDENT NAME ( Roll no.) STUDENT NAME ( Roll no.) UNDER THE GUIDANCE OF MR/MS. <GUIDE NAME> (<Designation, Name of the Department>) DEPARTMENT OF .•••.••• .............. ........ ••..•.• ....... .... SIR CHHOTU RAM INSTITUTE OF ENGINEERING & TECHNOLOGY CHAUDHARY CHARAN SINGH UNIVERSITY, MEERUT (Year)

Transcript of - CCS University

t

A Project Report

On

<PROJECT TITLE> Submitted in partial fulfillment of the requirement for the award of the degree of

BACHELOR OF TECHNOLOGY

In

BRANCH NAME

By:

STUDENT NAME ( Roll no.)

STUDENT NAME ( Roll no.)

STUDENT NAME ( Roll no.)

UNDER THE GUIDANCE OF

MR/MS. <GUIDE NAME>

(<Designation, Name of the Department>)

DEPARTMENT OF .•••.•••..............•........••..•.•.......•....

SIR CHHOTU RAM INSTITUTE OF ENGINEERING & TECHNOLOGY

CHAUDHARY CHARAN SINGH UNIVERSITY, MEERUT

(Year)

A Project Report

On

<PROJECT TITLE> Submitted in partial fulfillment of the requirement for the award of the degree of

MASTER OF COMPUTER APPLICATION

In

BRANCHNAME

By:

STUDENT NAME ( Roll no.)

STUDENT NAME ( Roll no.)

STUDENT NAME ( Roll no.)

UNDER THE GUIDANCE OF

MR/MS. <GUIDE NAME>

(<Designation, Name of the Department>)

DEPARTMENT OF .............................................. .

SIR CHHOTU RAM INSTITUTE OF ENGINEERING & TECHNOLOGY

CHAUDHARY CHARAN SINGH UNIVERSITY, MEERUT (Year)

A Project Report

On

<PROJECT TITLE> Submitted in partial fulfillment of the requirement for the award of the degree of

MASTER OF BUSINESS ADMINISTRATION

In

BRANCH NAME

By:

STUDENT NAME ( Roll no.)

STUDENT NAME ( Roll no.)

STUDENT NAME ( Roll no.)

UNDER THE GUIDANCE OF

MR/MS. <GUIDE NAME>

(<Designation, Name of the Department>)

DEPARTMENT OF .............................................. .

SIR CHHOTU RAM INSTITUTE OF ENGINEERING & TECHNOLOGY

CHAUDHARY CHARAN SINGH UNIVERSITY, MEERUT

(Year)

SIR CHHOTU RAM INSTITUTE OF ENGINEERING & TECHNOLOGY

CHAUDHARY CHARAN SINGH UNIVERSITY MEERUT Approved by A.I.C.T.E., New Delhi

Student Declaration/Certificate

I .................................... hereby declare that the work, which is being presented in the project entitled " .......................................... "in partial fulfillment of the requirement for the award of BACHELOR OF TECHNOLOGY (B.TECH.) degree, is an authentic record of my own work carried out under the supervision of .................................. .

The matter embodied in this project has not been submitted by us for the award of any other degree.

Date:

(Full Signature of the students)

This is to certify that the above statements made by the candidate are correct to the best of my knowledge.

( ... .......................... ) (Co-Ordinator, ........ Deptt)

( ......................... ) (Project Supervisor)

( ........................... ·) (Director, SCRIET)

SIR CHHOTU RAM INSTITUTE OF ENGINEERING & TECHNOLOGY

CHAUDHARY CHARAN SINGH UNIVERSITY MEERUT Approved by A.I.C.T.E., New Delhi

Student Declaration/Certificate

I . . . . . . . .. .. . . . . .. . . .. . . . .. . . . . . . . . .. hereby declare that the work, which is being presented in the project entitled " .......................................... "in partial fulfillment of the requirement for the award of MASTER OF COMPUTER APPLICATION (MCA) degree, is an authentic record of my own work carried out under the supervision of .................................. .

The matte·r embodied in this project has not been submitted by us for the award of any other degree.

Date:

------------------------------(Full Signature of the students)

This is to certify that the above statements made by the candidate are correct to the best of my knowledge.

( ............................. ) (Co-Ordinator, ........ Deptt)

( ......................... ) (Project Supervisor)

( ........................... ) (Director, SCRIET)

0 .

SIR CHHOTU RAM INSTITUTE OF ENGINEERING & TECHNOLOGY

CHAUDHARY CHARAN SINGH UNIVERSITY MEERUT Approved by A.I.C.T.E., New Delhi

Student Declaration/Certificate

I .................................... hereby declare that the work, which is being presented in the project entitled " .......................................... "in partial fulfillment of the requirement for the award of MASTER OF BUSINESS ADMINISTRATION degree, is an authentic record of my own work carried out under the supervision of .................................. .

The matter embodied in this project has not been submitted by us for the award of any other degree.

Date:

(Full Signature of the students)

This is to certify that the above statements made by the candidate are correct to the best of my knowledge.

( ............................. ) (Co-Ordinator, ........ Deptt)

( ......................... ) (Project Supervisor)

( ........................... ) (Director, SCRIET)

Q ACKNOWLEDGEMENT

We extend our thanks to ........................... Director and Co-ordinator

.......... . .................... , for giving us the motivation and guidance to complete this project.

We are deeply indebted to our project guide .................................. , for the initial idea

of the project and for all the guidance and encouragement he gave in the subsequent months.

His supervision and co-operation at every stage helped us in successfully completing the

project. Whatever intellectual effort may be reflected from this project is the direct result of

the informative and stimulating discussions and suggestions he has given during the course

of the project.

Lastly, we would like to thank the entire staff of the ............... Department and our college

for their support and co-operation in the completion of this project.

(Students Signature)

I

Student Name (Roll No.) (email.Id)

Imp. Points to Prepare Project Report

1. Cover of the Project Report.

• Colour- Dark /Blue (B.Tech).

• Colour -Brown/Red (MCA/MBA).

• Matter Written By Golden Colour.

• Hard Binding.

2. Each Project Report must be prepared in A4 size paper.

3. First Page of the Project Report same as Cover Matter.

4. Acknowledgement.

5. Company Certificate properly signed on letter head.

6. Candidate Declaration/ Certificate.

7. Table of contents with heading number and page number.

8. Soft copy of project report with Code and EXE. files in CD only.

9. Soft copy of project presentation on power point slides in CD only.

IO.Project report should not be more than 150 page in all respects.

1 l.On the date of Internal and External project presentation. the candidate should be in

formal Attire.

12.Two copies of project report are to be prepared for University, and College Library.

Note: Give Hardware Software Requirement for complete examination of project on

external project presentation day.

O ·

GUIDELINES*

I. Each page must have a page number at center of bottom with (Font size-12, bold, center of the Bottom,)

2. Margins, Fonts-Type etc. for pages 3. For Acknowledgement, all Certificates, Declaration, the following should be the margins: -Left-1.4" . Right-OJ" Top-1" · Bottom-JI" Main Heading (Bold, Times New Roman (TNR), Font size-14) Running ¥aterial (Times New Roman, (TNR) Font size -I 2) Line Margine -1.5 line gap. 4. For Table Content/Index. Top heading{TNR, Bold, Fontsize-14) S. No. Titles Page No First Heading (Bold, TNR, Font size -13) Sub heading {TNR, Font size -12) 5. For Prpject Details Chapter Name ( on single page, Middle, TNR, Font size -40) Inside of Chapter Main Heading (Bold, Font size -14, TNR) First Heading (Bold, Font size-13, TNR) Sub Headings (Bold, Font size-12, TNR) Running Material/ Paragraphs-(Non Bold, TNR, Font size -12) 1.5 line gap between lines. Important words can be bold in running material (if required). For Diagrams - Titles (Bold, Ariel Black, Font size -14) For Bibliqgraphy/Reference - Main heading (Bold, TNR, Font size -14) Remaining (TNR, Font size -12) 1.5 line gap,

TABLE OF CONTENTS

J. Introduction to project • •· • .... · · ·· · · · · · .. · · · · · · · · · ··· · · · · ·· · · ·· · · · · · · · · · · · •·· · · • ••·· • ••• · · ··

1.1 Company Profile 1.2 lntroductfon J .3 Existing system and its limitations

2 Proposed system (working/functioning/ methodology)

21 Modules and sub-modules 22 H/W & SIW requirements.

3. S~ Analysis

3.1 Feasibility Study 3. 1.1 Technical Feas:.ibility 3.1.2 Operational Peast"bility 3.1.3 Economical Feasibility 3. 1 .4 sdciaJ Feasibility

I

4. System Design

4.1 Dabi flow Diagram (DFD) 4.2 Flow Chart/ Process Flow Diagram 4.3 Entity relationship (ER) diagram (wherever necessary)

S.Coding

S.1 Function/Procedure coding S.2 GUI interface coding

6. Testing

6.1 Methodology of Testing used in the project 6.2 Steps of Testing of Module

I

7. Implementation/Maintenance

8. Snapshots

9.Condusion I

JO. Fw:qre Scope

I 1. APPENDICES

12. BffiLIOGRAPHY/ REFHRNCES I

i A Proje ct Report.docx - r L_ -·-

Nau- CD C.OOtaining Present.anon and oodiDR is mandatory to be enclosed at the last page.

o · .

Company Certificate on Company Letter Head

Ref. No .. ___ _

TO WHOM IT MAY CONCERN

This is to certify that ••.••••••••••••• (Name of student) bas carried out the project at our

Ol'ganization &om January 20_ to .June-20_.

Under tnining period. be/she has worked on the project en1itled " ..•..•••..•••..•••••••••..•.....• "

Wlder the guidance of ..••...•••.•••.••••••••••.•.•••. . (Name and designation of external

supervisor) During this project. he/.sbe has been an active member of the team.

The work camed by him/her is satisfiu:tory and wish bis Jher all the best for future

assignments.

Authorized Signatory

Nanie ..............•.......

Designation •..••••.•..........

.Date.·················