Oracle Database Client Installation Guide 11g Release 1 ...

Oracle® DatabaseClient Installation Guide

11g Release 1 (11.1) for HP-UX

B32073-06

July 2010

Oracle Database Client Installation Guide, 11g Release 1 (11.1) for HP-UX

B32073-06

Copyright © 2009, 2010, Oracle and/or its affiliates. All rights reserved.

Primary Author: Namrata Bhakthavatsalam

Contributing Authors: Kevin Flood, Clara Jaeckel, Emily Murphy, Terri Winters

Contributors: David Austin, Subhranshu Banerjee, Mark Bauer, Robert Chang, Jonathan Creighton, Sudip Datta, Thirumaleshwara Hasandka, Joel Kallman, George Kotsovolos, Simon Law, Richard Long, Rolly Lv, Padmanabhan Manavazhi, Sreejith Minnanghat, Krishna Mohan, Rajendra Pingte, Hanlin Qian, Janelle Simmons, Roy Swonger, Lyju Vadassery, Douglas Williams

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.

This software is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure the safe use of this software. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous applications.

Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

This software and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

iii

Contents

Preface ................................................................................................................................................................ vii

Audience...................................................................................................................................................... viiDocumentation Accessibility .................................................................................................................... viiCommand Syntax ...................................................................................................................................... viiiAccessing Documentation........................................................................................................................ viiiRelated Documentation.............................................................................................................................. ixTypographic Conventions.......................................................................................................................... x

1 Overview of Oracle Client Installation

Planning Your Installation ..................................................................................................................... 1-1Installation Considerations .................................................................................................................... 1-2

Hardware and Software Certification............................................................................................. 1-2Multiple Oracle Homes Support...................................................................................................... 1-2

Installing the Software on a System with an Existing Oracle Installation.......................... 1-2Oracle Client Installation Methods ...................................................................................................... 1-3

Interactive Installation Methods ...................................................................................................... 1-3Automated Installation Methods Using Response Files .............................................................. 1-3

Oracle Client Installation Types ........................................................................................................... 1-3Upgrade Considerations ......................................................................................................................... 1-4

AL24UTFFSS Character Set .............................................................................................................. 1-5

2 Preinstallation Tasks

Logging In to the System as root ........................................................................................................... 2-1Checking the Hardware Requirements................................................................................................ 2-2

Memory Requirements...................................................................................................................... 2-2System Architecture........................................................................................................................... 2-3Disk Space Requirements.................................................................................................................. 2-3

Checking the Software Requirements ................................................................................................. 2-4Operating System Requirements ..................................................................................................... 2-4Compiler Requirements .................................................................................................................... 2-5Patch Requirement............................................................................................................................. 2-5Additional Software Requirements ................................................................................................. 2-7

Oracle ODBC Drivers ................................................................................................................. 2-7Oracle JDBC/OCI Drivers ......................................................................................................... 2-7Programming languages............................................................................................................ 2-7

iv

Browser Requirements ............................................................................................................... 2-7Creating Required Operating System Group and User.................................................................... 2-8

Creating the Oracle Inventory Group ............................................................................................. 2-9Creating the Oracle Software Owner User..................................................................................... 2-9

Determining Whether an Oracle Software Owner User Exists ............................................ 2-9Creating an Oracle Software Owner User............................................................................ 2-10Modifying an Oracle Software Owner User ........................................................................ 2-10

Identifying Required Software Directories ..................................................................................... 2-10Oracle Base Directory ..................................................................................................................... 2-10Oracle Inventory Directory............................................................................................................ 2-11Oracle Home Directory .................................................................................................................. 2-12

Identifying or Creating an Oracle Base Directory .......................................................................... 2-12Identifying an Existing Oracle Base Directory............................................................................ 2-12Creating an Oracle Base Directory................................................................................................ 2-13

Configuring the oracle User’s Environment .................................................................................... 2-14

3 Installing Oracle Database Client

Reviewing Installation Guidelines....................................................................................................... 3-1Accessing the Installation Software ..................................................................................................... 3-1

Downloading Oracle Software from the Oracle Technology Network Web Site..................... 3-2Downloading the Installation Archive Files ........................................................................... 3-2Extracting the Installation Files................................................................................................. 3-2

Copying the Software to the Hard Disk ......................................................................................... 3-3Mounting Disks........................................................................................................................... 3-3Copying the Oracle Client Software to a Hard Disk ............................................................. 3-4

Installing the Oracle Client Software................................................................................................... 3-4Running Oracle Universal Installer ................................................................................................. 3-4

4 Oracle Database Postinstallation Tasks

Required Postinstallation Tasks ........................................................................................................... 4-1Downloading and Installing Patches .............................................................................................. 4-1Updating Instant Client..................................................................................................................... 4-2Connecting with Instant Client ........................................................................................................ 4-2

Recommended Postinstallation Tasks ................................................................................................. 4-3Configuring Instant Client Light ..................................................................................................... 4-3Creating a Backup of the root.sh Script...................................................................................... 4-4Connecting Instant Client or Instant Client Light to an Oracle Database ................................. 4-4

Specifying a Connection by Using the Easy Connect Naming Method ............................. 4-4Specifying a Connection by Configuring a tnsnames.ora File ........................................ 4-5Specifying a Connection by Using an Empty Connect String and the TWO_TASK Environment Variable ................................................................................................................ 4-5

Setting Up User Accounts ................................................................................................................. 4-6Setting the NLS_LANG Environment Variable............................................................................. 4-6Generating the Client Static Library................................................................................................ 4-6

Required Product-Specific Postinstallation Tasks ............................................................................ 4-6Configuring Oracle Net Services ..................................................................................................... 4-7Configuring Oracle Precompilers .................................................................................................... 4-7

v

Configuring Pro*C/C++ ............................................................................................................ 4-7Configuring Pro*FORTRAN ..................................................................................................... 4-7

5 Removing Oracle Software

Removing Oracle Software..................................................................................................................... 5-1

A Installing and Configuring Oracle Database Using Response Files

How Response Files Work? ................................................................................................................... A-1Reasons for Using Silent Mode or Noninteractive Mode............................................................ A-2General Procedure for Using Response Files ................................................................................ A-2

Preparing a Response File ..................................................................................................................... A-3Editing a Response File Template................................................................................................... A-3Recording a Response File ............................................................................................................... A-4

Running Oracle Universal Installer Using a Response File ........................................................... A-5

B Configuring Oracle Database Globalization Support

Installing and Using Oracle Components in Different Languages............................................... B-1Configuring Oracle Components to Run in Different Languages ............................................. B-1

Determining the Operating System Locale by Using the LANG Environment Variable B-1Configuring Locale and Character Sets by Using the NLS_LANG Environment Variable .... ... ........................................................................................................................................B-2

Installing Translation Resources ..................................................................................................... B-3Running Oracle Universal Installer in Different Languages ......................................................... B-4

C Troubleshooting

Verify Requirements .............................................................................................................................. C-1X Window Display Errors ...................................................................................................................... C-1What to Do If an Installation Error Occurs?....................................................................................... C-2Reviewing the Log of an Installation Session ................................................................................... C-2Troubleshooting Configuration Assistants........................................................................................ C-3

Configuration Assistant Failure...................................................................................................... C-3Irrecoverable Errors .......................................................................................................................... C-4

Silent-Mode Response File Error Handling....................................................................................... C-4Cleaning Up After a Failed Installation.............................................................................................. C-4

D Frequently Asked Questions About Installation

Installing Oracle Database or Oracle Client ...................................................................................... D-1Installing Oracle Database Tools ......................................................................................................... D-3Installing Oracle Database with Oracle Applications ..................................................................... D-7Installing Oracle Database Heterogeneous Connectivity Tools (Gateways) .............................. D-8

Index

vii

Preface

This guide provides instructions about installing and configuring Oracle Database for HP-UX. This guide also talks about installing and configuring database using response files, globalization support, ports, and troubleshooting.

The preface contains the following topics:

■ Audience

■ Documentation Accessibility

■ Command Syntax

■ Accessing Documentation

■ Related Documentation

■ Typographic Conventions

Audience Oracle Database Client Installation Guide for HP-UX guide is intended for anyone responsible for installing Oracle Client 11g Release 1 (11.1) on a single HP-UX system. Additional installation guides for Oracle Database, Oracle Real Application Clusters, Oracle Clusterware, Oracle Database Examples, and Oracle Enterprise Manager Grid Control are available on the relevant installation media.

Documentation AccessibilityOur goal is to make Oracle products, services, and supporting documentation accessible to all users, including users that are disabled. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For more information, visit the Oracle Accessibility Program Web site at http://www.oracle.com/accessibility/.

Accessibility of Code Examples in DocumentationScreen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an

See Also: Oracle Database Installation Guide for HP-UX to install Oracle Database using the default settings

viii

otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.

Accessibility of Links to External Web Sites in DocumentationThis documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.

Access to Oracle SupportOracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/support/contact.html or visit http://www.oracle.com/accessibility/support.html if you are hearing impaired.

Command SyntaxUNIX command syntax appears in monospace font. The dollar character ($), number sign (#), or percent character (%) are UNIX command prompts. Do not enter them as part of the command. The following command syntax conventions are used in this guide:

Accessing DocumentationThe documentation for this release includes platform-specific documentation and generic product documentation.

Platform-Specific DocumentationPlatform-specific documentation includes information about installing and using Oracle products on particular platforms.

Convention Description

backslash \ A backslash is the UNIX command continuation character. It is used in command examples that are too long to fit on a single line. Enter the command as displayed (with a backslash) or enter it on a single line without a backslash:

dd if=/dev/rdsk/c0t1d0s6 of=/dev/rst0 bs=10b \ count=10000

braces { } Braces indicate required items:

.DEFINE {macro1}

brackets [ ] Brackets indicate optional items:

cvtcrt termname [outfile]

ellipses ... Ellipses indicate an arbitrary number of similar items:

CHKVAL fieldname value1 value2 ... valueN

italics Italic type indicates a variable. Substitute a value for the variable:

library_name

vertical line | A vertical line indicates a choice within braces or brackets:

FILE filesize [K|M]

ix

This guide contains information required to install Oracle Database 11g Release 1 (11.1) on various platforms of Hp-UX. Ensure that you review information related to the platform on which you intend to install Oracle Database 11g.

The platform-specific documentation for this product is available in both Adobe portable document format (PDF) and HTML format on the product media. To access the platform-specific documentation on media:

1. Use a Web browser to open the welcome.htm file in the top-level directory of the media.

2. For DVD only, select the appropriate product link.

3. Select the Documentation tab.

If you prefer paper documentation, then open and print the PDF files.

Product DocumentationProduct documentation includes information about configuring, using, or administering Oracle products on any platform. The product documentation for Oracle Database 11g products is available in both HTML and PDF formats in the Oracle Database 11g Release 1 (11.1) Online Documentation Library. To check for updates to this document and to view other Oracle documentation, select the Documentation link or the Software & Patches link on the Oracle Database 11g Release 1 Beta Program Web site.

Related DocumentationThe platform-specific documentation for Oracle Database 11g products includes the following manuals:

■ Oracle Database Release Notes for HP-UX

■ Oracle Database Installation Guide for HP-UX

■ Oracle Database Examples Installation Guide

■ Oracle Real Application Clusters Installation Guide for HP-UX

■ Oracle Database Quick Installation Guide for HP-UX Itanium

■ Oracle Database Client Quick Installation Guide for HP-UX Itanium

■ Oracle Enterprise Manager Grid Control Installation and Basic Configuration

■ Oracle Database Administrator's Reference for Linux and UNIX

■ Oracle Database Storage Administrator's Guide

■ Oracle Clusterware Installation Guide for HP-UX

■ Oracle Database Upgrade Guide

■ Oracle Database 2 Day DBA

For information about Oracle error messages, see Oracle Database Error Messages. Oracle error message documentation is available only in HTML. If you only have access to the Oracle Database 10g Release 2 (10.2) Online Documentation Library, then you can browse the error messages by range. Once you find the specific range, use your browser's "find in page" feature to locate the specific message. When connected to the Internet, you can search for a specific error message using the error message search feature of the Oracle online documentation.

x

Many books in the documentation set use the sample schemas of the seed database, which is installed by default when you install Oracle. Refer to Oracle Database Sample Schemas for information on how these schemas were created and how you can use them yourself.

Printed documentation is available for sale in the Oracle Store at:

http://shop.oracle.com/

To download free release notes, installation documentation, white papers, or other collateral, please visit the Oracle Technology Network. You must register online before using OTN; registration is free and can be done at:

http://www.oracle.com/technology/membership/

If you already have a user name and password for Oracle Technology Network, then you can go directly to the documentation section of the Oracle Technology Network Web site at:

http://www.oracle.com/technology/documentation/

Refer to Oracle Database Release Notes for HP-UX or important information that was not available when this book was released. The release notes for Oracle Database 11g are updated regularly. The most recent version is available on Oracle Technology Network at:

http://www.oracle.com/technology/documentation/index.html

Typographic ConventionsThe following text conventions are used in this document:

Convention Meaning

boldface Boldface type indicates graphical user interface elements associated with an action, or terms defined in text or the glossary.

italic Italic type indicates book titles, emphasis, or placeholder variables for which you supply particular values.

monospace Monospace type indicates commands within a paragraph, URLs, code in examples, text that appears on the screen, or text that you enter.

1

Overview of Oracle Client Installation 1-1

1 Overview of Oracle Client Installation

This chapter describes the different installation types of Oracle Client for HP-UX and issues to consider before you install Oracle Database:

■ Planning Your Installation

■ Installation Considerations

■ Oracle Client Installation Methods

■ Oracle Client Installation Types

Planning Your InstallationThe Oracle Database installation process consists of the following phases:

1. Read the release notes: Read Oracle Database Release Notes for HP-UX before you begin the installation. The release notes are available with the platform-specific documentation. The latest version of the release notes is available on Oracle Technology Network at:

http://www.oracle.com/technology/documentation

2. Review the licensing information: Although the installation media in your media pack contain many Oracle components, you are permitted to use only those components for which you have purchased licenses.

Oracle Support Services does not provide support for components for which licenses have not been purchased.

3. Plan the installation: This chapter describes the Oracle products that you can install and issues that you must consider before starting the installation.

You can also refer to Appendix D, which covers frequently asked questions about installing Oracle Database components, such as how to install Oracle client if the site uses Oracle applications or if you need multiple Oracle client connections.

4. Complete preinstallation tasks: Chapter 2 describes preinstallation tasks that you must complete before installing the product.

5. Install the software: Use the following sections to install Oracle Database:

■ Chapter 3 describes how to use Oracle Universal Installer to install Oracle Client.

See Also: Oracle Database Licensing Information

Installation Considerations

1-2 Oracle Database Client Installation Guide

■ Appendix A provides information on performing noninteractive (silent) installations, which you may want to use if you must perform multiple installations of Oracle Client.

■ Appendix B describes globalization support information.

■ Appendix C provides troubleshooting advice in case you encounter problems with the installation.

■ Chapter 5 describes how to remove Oracle Client.

6. Complete postinstallation tasks: Chapter 4 describes recommended and required postinstallation tasks.

Installation ConsiderationsThis section contains information that you should consider before deciding how to install this product. It contains the following sections:

■ Hardware and Software Certification

■ Multiple Oracle Homes Support

Hardware and Software CertificationThe platform-specific hardware and software requirements included in this installation guide were current at the time this guide was published. However, because new platforms and operating system software versions might be certified after this guide is published, review the certification matrix on the My Oracle Support (formerly OracleMetalink) Web site for the most up-to-date list of certified hardware platforms and operating system versions. The My Oracle Support (formerly OracleMetalink) Web site is available at the following URL:

https://support.oracle.com

You must register online before using My Oracle Support (formerly OracleMetalink). After logging in, click Certify from the top right-hand side of the screen. The Certifications page appears. Other options include Product Availability, Desupport Notices, and Alerts.

Multiple Oracle Homes SupportThis product supports multiple Oracle homes. This means that you can install this release or earlier releases of the software more than once on the same system, in different Oracle home directories.

Installing the Software on a System with an Existing Oracle InstallationYou must install this product into a new Oracle home directory. You cannot install products from one release of Oracle Database into an Oracle home directory of a different release. For example, you cannot install release 11.1 software into an existing Oracle9i Oracle home directory. If you attempt to install this release into an Oracle home directory that contains software from an earlier Oracle release, then the installation fails.

Oracle Database Client can be installed in the same Oracle Database home if both products are at the same release level. For example, you can install Oracle Database Client 10g Release 2 (10.2) into an existing Oracle Database 10g Release 2 (10.2) home. If you apply a patch set before installing the client, then you must apply the patch set again.

Oracle Client Installation Types


You can install this release more than once on the same system if each installation is installed in a separate Oracle home directory.

Oracle Client Installation MethodsYou can choose different installation methods to install Oracle Client, as follows:

■ Interactive Installation Methods

■ Automated Installation Methods Using Response Files

Interactive Installation MethodsWhen you use the interactive method to install Oracle Client, Oracle Universal Installer displays a series of screens that enable you to specify all of the required information to install the Oracle Client software.

Automated Installation Methods Using Response FilesBy creating a response file and specifying this file when you start Oracle Universal Installer, you can automate some or all of the Oracle Database installation. These automated installation methods are useful if you must perform multiple installations on similarly configured systems or if the system where you want to install the software does not have X Window system software installed.

When you use a response file, you can run Oracle Universal Installer in the following modes, depending on whether you specify all of the required information or not:

■ Silent Mode: Oracle Universal Installer runs in silent mode if you use a response file that specifies all required information. None of the Oracle Universal Installer screens are displayed.

■ Suppressed Mode: Oracle Universal Installer runs in suppressed mode if you do not specify all required information in the response file. Oracle Universal Installer displays only the screens that prompt for the information that you did not specify.

For more information about these modes and about how to complete an installation using response files, refer to Appendix A.

Oracle Client Installation TypesYou can choose one of the following installation types when installing Oracle Client:

■ Instant Client: Enables you to install only the shared libraries required by Oracle Call Interface (OCI), Oracle C++ Call Interface (OCCI), Pro*C, or Java database connectivity (JDBC) OCI applications. This installation type requires much less disk space than the other Oracle Client installation types.

Included in the Instant Client installation is Instant Client Light. You may want to use this version of Instant Client if the applications generate error messages in American English only. Instant Client Light is beneficial to application that use one of the supported character sets and can accept error messages in American English. The following are the supported character sets:

– US7ASCII

See Also: Oracle Call Interface Programmer's Guide or Oracle Database JDBC Developer's Guide and Reference for more information about Instant Client

Upgrade Considerations


– WE8DEC

– WE8ISO8859P1

– WE8EBCDIC37C for EBCDIC platform only

– WE8EBCDIC1047 for EBCDIC platform only

– WE8MSWIN1252

– UTF8

– AL32UTF8

– AL16UTF16

The advantage of using Instant Client Light is that it has a smaller footprint than the regular Instant Client. The shared libraries, which an application must load, are only 34 MB as opposed to the 110 MB that regular Instant Client uses. Therefore, the applications use less memory.

■ Administrator: Enables applications to connect to an Oracle Database instance on the local system or on a remote system. It also provides tools that enable you to administer Oracle Database.

■ Runtime: Enables applications to connect to an Oracle Database instance on the local system or on a remote system.

■ Custom: Enables you to select individual components from the list of Administrator and Runtime components.

Upgrade ConsiderationsFor information about upgrading a earlier release of Oracle Database to Oracle Database 11g Release 1 (11.1), refer to Oracle Database Upgrade Guide. The following sections provide additional platform-specific upgrade information that you should review before upgrading an existing database:

Caution: AL32UTF8 is the Oracle Database character set that is appropriate for XMLType data. It is equivalent to the IANA registered standard UTF-8 encoding, which supports all valid XML characters.

Do not confuse Oracle Database database character set UTF8 (no hyphen) with database character set AL32UTF8 or with character encoding UTF-8. Database character set UTF8 has been superseded by AL32UTF8. Do not use UTF8 for XML data. UTF8 supports only Unicode version 3.0 and earlier; it does not support all valid XML characters. AL32UTF8 has no such limitation.

Using database character set UTF8 for XML data could potentially cause a irrecoverable error or affect security negatively. If a character that is not supported by the database character set appears in an input-document element name, then a replacement character (usually "?") is substituted for it. This terminates parsing and raises an exception.



AL24UTFFSS Character Set

Before you upgrade an existing database that uses the AL24UTFFSS character set, you must upgrade the database character set to UTF8. Oracle recommends that you use the Character Set Scanner (csscan) utility for data analysis before attempting to upgrade the existing database character set.

The Character Set Scanner utility checks all character data in the database and tests for the effects of, and problems with, changing the character set encoding. Before running the Character Set Scanner utility, set the shared library path environment variable for the platform to include the $ORACLE_HOME/lib directory. The shared library path environment path that you must set is LD_LIBRARY_PATH.

Note: The information in this section does not apply to an upgrade of a eelease 1 (9.0.1) or later release of Oracle Database.

Note: AL32UTF8 is the Oracle Database character set that is appropriate for XMLType data. It is equivalent to the IANA registered standard UTF-8 encoding, which supports all valid XML characters.

Do not confuse Oracle Database database character set UTF8 (no hyphen) with database character set AL32UTF8 or with character encoding UTF-8. Database character set UTF8 has been superseded by AL32UTF8. Do not use UTF8 for XML data. UTF8 supports only Unicode version 3.0 and earlier; it does not support all valid XML characters. AL32UTF8 has no such limitation.

Using database character set UTF8 for XML data could potentially cause a irrecoverable error or affect security negatively. If a character that is not supported by the database character set appears in an input-document element name, then a replacement character (usually "?") is substituted for it. This will terminate parsing and raise an exception.

See Also: Oracle Database Globalization Support Guide for more information about Character Set Support

2

Preinstallation Tasks 2-1

2 Preinstallation Tasks

This chapter describes the tasks that you must complete before you start Oracle Universal Installer. It includes information about the following tasks:

■ Logging In to the System as root

■ Checking the Hardware Requirements

■ Checking the Software Requirements

■ Creating Required Operating System Group and User

■ Identifying Required Software Directories

■ Identifying or Creating an Oracle Base Directory

■ Configuring the oracle User’s Environment

Logging In to the System as rootBefore you install the Oracle software, you must complete several tasks as the root user. To log in as the root user, complete one of the following procedures:

■ If you are installing the software from an X Window System workstation or X terminal, then:

1. Start a local terminal session, for example, an X terminal (xterm).

2. If you are not installing the software on the local system, then enter the following command to enable the remote host to display X applications on the local X server:

$ xhost fully_qualified_remote_host_name

For example:

$ xhost somehost.us.example.com

Note: Unless you intend to complete a silent-mode installation, you must install the software from an X Window System workstation, an X terminal, or a PC or other system with X server software installed.

For more information about silent-mode installations, refer to Appendix A.

Checking the Hardware Requirements


3. If you are not installing the software on the local system, then use the ssh, rlogin, or telnet command to connect to the system where you want to install the software:

$ telnet fully_qualified_remote_host_name

4. If you are not logged in as the root user, then enter the following command to switch user to root:

$ su -password:#

■ If you are installing the software from a PC or other system with X server software installed, then:

1. Start the X server software.

2. Configure the security settings of the X server software to permit remote hosts to display X applications on the local system.

3. Connect to the remote system where you want to install the software and start a terminal session on that system, for example, an X terminal (xterm).

4. If you are not logged in as the root user on the remote system, then enter the following command to switch user to root:

$ su -password:#

Checking the Hardware RequirementsThe system must meet the following minimum hardware requirements:

■ Memory Requirements

■ System Architecture

■ Disk Space Requirements

Memory RequirementsThe following are the memory requirements for installing Oracle Database 11g Release 1:

■ At least 256 MB of RAM

To determine the RAM size, enter the following command:

– On HP-UX PA-RISC

# grep "Physical:" /var/adm/syslog/syslog.log

– On HP-UX Itanium

# /usr/contrib/bin/machinfo | grep -i Memory

Note: If necessary, refer to your X server documentation for more information about completing this procedure. Depending on the X server software that you are using, you must complete the tasks in a different order.

Checking the Hardware Requirements


If the size of the RAM is less than the required size, then you must install more memory before continuing.

■ The following table describes the relationship between installed RAM and the configured swap space requirement.

To determine the size of the configured swap space, enter the following command:

# /usr/sbin/swapinfo -a

If necessary, refer to the operating system documentation for information about how to configure additional swap space.

System ArchitectureTo determine whether the system architecture can run the software, enter the following command:

# /bin/getconf KERNEL_BITS

Disk Space RequirementsThe following are the disk space requirements for installing Oracle Database 11g Release 1:

■ Between 150 and 400 MB of disk space in the /tmp directory

To determine the amount of free disk space in the /tmp directory enter the following command:

# bdf /tmp

If there is less than 400 MB of free disk space available in the /tmp directory, then complete one of the following steps:

■ Delete unnecessary files from the /tmp directory to meet the disk space requirement.

■ Set the TMP and TMPDIR environment variables when setting the oracle user’s environment (described later).

■ Extend the file system that contains the /tmp directory. If necessary, contact the system administrator for information about extending file systems.

■ Between 1.5 GB and 3.5 GB of disk space for the Oracle software, depending on the installation type

Available RAM Swap Space Required

Up to 256 MB 3 times the size of RAM

Between 257 MB and 512 MB 2 times the size of RAM

More than 726 MB 0.75 times the size of RAM

Note: The expected output of this command is 64. If you do not see the expected output, then you cannot install the software on this system.

Checking the Software Requirements


To determine the amount of free disk space on the system, enter the following command:

# bdf

The following table shows the approximate disk space requirements for software files for each installation type:

Checking the Software RequirementsDepending on the products that you intend to install, verify that the following software is installed on the system.

■ Operating System Requirements

■ Compiler Requirements

■ Patch Requirement

■ Additional Software Requirements

Operating System RequirementsThe following are the operating system requirements for Oracle Database 11g Release 1:

■ HP-UX 11i v2 (11.23)

■ HP-UX 11i v3 (11.31)

To determine the distribution and version of HP-UX installed, enter the following command:

# uname -a

HP-UX hostname B.11.23 ia64 109444686 unlimited-user license

In this example, the version of HP-UX 11i is 11.23.

To determine whether a bundle, product, or fileset is installed, enter a command similar to the following, where level is bundle, product, or fileset:

# /usr/sbin/swlist -l level | more

Installation Type Requirement for Software Files (MB)

Instant Client 206

Administrator 1.76 (GB)

Runtime 1.34 (GB)

Custom (maximum) 1.67 (GB)

Note: Oracle Universal Installer performs checks on your system to verify that it meets the listed requirements. To ensure that these checks pass, verify the requirements before you start Oracle Universal Installer.



If a required bundle, product, or fileset is not installed, then you must install it. Refer to your operating system or software documentation for information about installing products.

In addition, you must verify that the following patches are installed on the system. The procedure following the table describes how to check these requirements.

Compiler RequirementsThe following are the compiler requirements for HP-UX Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, and Oracle XML Developer’s Kit (XDK) with Oracle Database 11g release 1:

For HP-PA RISC:

■ HP C/ANSI C Compiler (B11.11.16)

HP ANSI C compiler (B.11.11.16) - June (AR0606) release

■ HP aC++ Compiler (A.03.73)

C++ (aCC) compiler (A.03.70) - June 2006 (AR0606) release

For HP-UX Itanium:

■ HP C/ANSI C Compiler (A.06.14)

HP ANSI C compiler (C.06.10) - June 2006 (AR0606) release

■ HP aC++ Compiler (A.06.14)

C++ (aCC) compiler (C.06.10) - June 2006 (AR0606) release

Patch RequirementIn addition, you must verify that the following patches are installed on the system.

Refer to the following Web site for information about additional java patches:

http://www.hp.com/products1/unix/java/patches/index.html

Note: There may be more recent versions of the patches listed installed on the system. If a listed patch is not installed, then determine whether a more recent version is installed before installing the version listed.

Note: There may be more recent versions of the patches listed installed on the system. If a listed patch is not installed, then determine whether a more recent version is installed before installing the version listed.



To ensure that the system meets these requirements:

1. To determine whether a patch is installed, enter a command similar to the following:

# /usr/sbin/swlist -l patch | grep PHSS_35979

Alternatively, to list all installed patches, enter the following command:

# /usr/sbin/swlist -l patch | more

Installation Type or Product Requirement

All installations For HP-UX 11i V2 (11.23):

■ Mar '07 Patch bundle for HP-UX 11iV2 (B.11.23.0703)

■ PHKL_35478: s700_800 11.23 shmget(2) cumulative patch

■ PHCO_36673: s700_800 11.23 libc cumulative patch

■ PHKL_36853: s700_800 11.23 pstat patch

■ PHSS_37958: 11.23 Libcl patch

All installations For HP-UX 11i V3 (11.31):

■ PHKL_35900: 11.31 evacd performance, kvaddr leak panic

■ PHKL_36248: 11.31 esctl cumulative patch

■ PHKL_36249: 11.31 esdisk cumulative patch

■ PHKL_35936: 11.31 call to read(2) or write(2) may incorrectly return -1

■ PHKL_38038: ABORT CORRUPTION HANG OTHER PANIC

■ PHSS_37959: 11.31 Libcl patch

Pro*C/C++,Oracle Call Interface,Oracle C++ Call Interface,Oracle XML Developer’s Kit (XDK)

Patches for HP-UX 11i V2 (11.23) on HP-UX PA-RISC:

■ PHSS_35176 - For HP C/ANSI C Compiler

■ PHSS_35101 - For HP C/ANSI C Compiler

■ PHSS_35103 - For HP C/ANSI C and HP aC++ compilers

■ PHSS_35102 - For HP aC++ Compiler. It changes the compiler version to A.03.73

Patches for HP-UX 11i V2 (11.23) on HP-UX Itanium:

■ PHSS_35974 - For HP C/ANSI C Compiler. It changes the compiler version to A.06.14

■ PHSS_35975 - For HP aC++ Compiler. It changes the compiler version to A.06.14

■ PHSS_35977 - For HP C/ANSI C and HP aC++ compilers

Pro*C/C++,Oracle Call Interface,Oracle C++ Call Interface,Oracle XML Developer’s Kit (XDK)

The following patch is required for HP C/ANSI C Compiler for HP-UX 11i V3 (11.31) on HP-UX PA-RISC:

HP C/aC++ B.11.31.01 (Swlist Bundle - C.11.31.01) February 2007

The following patch is required for HP aC++ Compiler for HP-UX 11i V3 (11.31) on HP-UX PA-RISC:

HP C/aC++ A.03.74 (Swlist Bundle - C.11.31.01) February 2007

The following patch is required for HP C/ANSI C and HP aC++ compilers for HP-UX 11i V3 (11.31) on HP-UX Itanium:

HP C/aC++ A.06.12 (Swlist Bundle - C.11.31.01) February 2007



2. If a required patch is not installed, then download it from the following Web site and install it:

http://itresourcecenter.hp.com

If the Web site displays a recent version of the patch, then download and install that version.

Additional Software RequirementsDepending on the components you want to use, you must ensure that the following software are installed:

■ Oracle ODBC Drivers

■ Oracle JDBC/OCI Drivers

■ Programming languages

■ Browser Requirements

Oracle ODBC DriversIf you intend to use ODBC, then you should build and install the most recent ODBC Driver Manager. You can download and install the Driver Manager from the following link:

http://www.unixodbc.org

You do not require ODBC Driver Manager to install Oracle Database.

To use ODBC, you must also install gcc 3.4.5 or later

Oracle JDBC/OCI DriversYou can use Java SDK 5.0 as an optional software with the Oracle JDBC/OCI drivers. However, this is not required for the installation.

Programming languagesThe following products are certified for use with:

■ Pro*COBOL

Micro Focus Cobol 5.0

■ Pro*FORTRAN

HP FORTRAN 90 (B11.23.20)

Browser RequirementsWeb browsers must support Java Script and the HTML 4.0 and CSS 1.0 standards. The following browsers meet these requirements:

■ Netscape Navigator 7.2

■ Netscape Navigator 8.1

■ Mozilla version 1.7

■ Microsoft Internet Explorer 6.0 SP2

■ Microsoft Internet Explorer 7.0

■ Firefox 1.0.4

Creating Required Operating System Group and User


■ Firefox 1.5

■ Firefox 2.0

Creating Required Operating System Group and UserDepending on whether this is the first time Oracle software is being installed on this system and on the products that you are installing, you must create the following operating system group and user:

■ The Oracle Inventory group (oinstall)

You must create this group the first time you install Oracle software on the system. The usual name chosen for this group is oinstall. This group owns the Oracle inventory, which is a catalog of all Oracle software installed on the system.

■ The Oracle software owner user (typically, oracle)

You must create this user the first time you install Oracle software on the system. This user owns all of the software installed during the installation. This user must have the Oracle Inventory group as its primary group. It must also have the OSDBA and OSOPER groups as secondary groups.

A single Oracle Inventory group is required for all installations of Oracle software on the system. After the first installation of Oracle software, you must use the same Oracle Inventory group for all subsequent Oracle software installations on that system. However, you can choose to create different Oracle software owner users for separate installations.

The following sections describe how to create the required operating system users and groups:

■ Creating the Oracle Inventory Group

■ Creating the Oracle Software Owner User

Note: If Oracle software is already installed on the system, then the existing Oracle Inventory group must be the primary group of the operating system user that you use to install new Oracle software.

Note: In Oracle documentation, this user is referred to as the oracle user.

Note: The following sections describe how to create local users and groups. As an alternative to creating local users and groups, you could create the appropriate users and groups in a directory service, for example, Network Information Services (NIS). For information about using directory services, contact your system administrator or refer to your operating system documentation.

Creating Required Operating System Group and User


Creating the Oracle Inventory GroupYou must create the Oracle Inventory group if it does not already exist. The following subsections describe how to determine the Oracle Inventory group name, if it exists, and how to create it if necessary.

Determining Whether the Oracle Inventory Group ExistsWhen you install Oracle software on the system for the first time, Oracle Universal Installer creates the oraInst.loc file. This file identifies the name of the Oracle Inventory group and the path of the Oracle Inventory directory.

To determine whether the Oracle Inventory group exists, enter the following command:

# more /var/opt/oracle/oraInst.loc

If the oraInst.loc file exists, then the output from this command is similar to the following:

inventory_loc=/u01/app/oracle/oraInventoryinst_group=oinstall

The inst_group parameter shows the name of the Oracle Inventory group, oinstall.

Creating the Oracle Inventory Group If the oraInst.loc file does not exist, then create the Oracle Inventory group by entering the following command:

# /usr/sbin/groupadd oinstall

Creating the Oracle Software Owner UserYou must create an Oracle software owner user in the following circumstances:

■ If an Oracle software owner user does not exist, for example, if this is the first installation of Oracle software on the system

■ If an Oracle software owner user exists, but you want to use a different operating system user

Determining Whether an Oracle Software Owner User ExistsTo determine whether an Oracle software owner user named oracle exists, enter the following command:

# id oracle

If the oracle user exists, then the output from this command is similar to the following:

uid=440(oracle) gid=200(oinstall) groups=201(dba),202(oper)If the user exists, then determine whether you want to use the existing user or create another oracle user. If you want to use the existing user, then ensure that the user’s primary group is the Oracle Inventory group. Refer to one of the following sections for more information:

Identifying Required Software Directories


■ If you want to use the existing Oracle software owner user, and the user’s primary group is the Oracle Inventory group, then refer to the "Identifying Required Software Directories" section on page 2-10.

■ To modify an existing user, refer to the "Modifying an Oracle Software Owner User" section on page 2-10.

■ To create a user, refer to the following section.

Creating an Oracle Software Owner UserIf the Oracle software owner user does not exist or if you require a new Oracle software owner user, then create it as follows. In the following procedure, use the user name oracle unless a user with that name already exists.

1. To create the oracle user, enter a command similar to the following:

# /usr/sbin/useradd -g oinstall[ -G dba] oracle

In this command:

■ The -g option specifies the primary group, which must be the Oracle Inventory group, for example oinstall

■ The -G option specifies optional secondary groups, the OSOPER group. For example, dba

2. Set the password of the oracle user:

# passwd oracle

Refer to the "Identifying Required Software Directories" section on page 2-10 to continue.

Modifying an Oracle Software Owner UserIf the oracle user exists, but its primary group is not oinstall, then enter a command similar to the following to modify it. Specify the primary group using the -g option and any required secondary group using the -G option:

# /usr/sbin/usermod -g oinstall -G dba[,oper] oracle

Identifying Required Software DirectoriesYou must identify or create the following directories for the Oracle software:

■ Oracle Base Directory

■ Oracle Inventory Directory

■ Oracle Home Directory

Oracle Base DirectoryThe Oracle base directory is a top-level directory for Oracle software installations. It is analogous to the C:\Oracle directory used for Oracle software installations on Microsoft Windows systems. On HP-UX systems, the Optimal Flexible Architecture

Note: If necessary, contact your system administrator before using or modifying an existing user.

Identifying Required Software Directories


(OFA) guidelines recommend that you use a path similar to the following for the Oracle base directory:

/mount_point/app/oracle_sw_owner

In this example:

■ mount_point is the mount point directory for the file system that will contain the Oracle software.

The examples in this guide use /u01 for the mount point directory. However, you could choose another mount point directory, such as /oracle or /opt/oracle.

■ oracle_sw_owner is the operating system user name of the Oracle software owner, for example oracle.

You must specify the ORACLE_BASE folder that contains all Oracle products.

You can use the same Oracle base directory for more than one installation or you can create separate Oracle base directories for different installations. If different operating system users install Oracle software on the same system, then each user must create a separate Oracle base directory. The following example Oracle base directories could all exist on the same system:

/u01/app/oracle/u01/app/orauser/opt/oracle/app/oracle

The following sections describe how to identify existing Oracle base directories that may be suitable for your installation and how to create an Oracle base directory if necessary.

Regardless of whether you create an Oracle base directory or decide to use an existing one, you must set the ORACLE_BASE environment variable to specify the full path to this directory.

Oracle Inventory DirectoryThe Oracle Inventory directory (oraInventory) stores an inventory of all software installed on the system. It is required by, and shared by, all Oracle software installations on a single system. The first time you install Oracle software on a system, Oracle Universal Installer prompts you to specify the path to this directory. then Oracle recommends that you choose the following path:

oracle_base/oraInventory

Oracle Universal Installer creates the directory that you specify and sets the correct owner, group, and permissions for it. You do not need to create it.

Note: If you have an existing ORACLE_BASE ,then you can select it from the Use existing drop down box .By default ,the drop down box contains the existing value for ORACLE_BASE already selected. Refer to "Installing the Oracle Client Software" on page 3-4 for further information.

If you do not have an OARCLE_BASE,then you can create a new one by editing the text in the list box.

Identifying or Creating an Oracle Base Directory


Oracle Home DirectoryThe Oracle home directory is the directory where you choose to install the software for a particular Oracle product. You must install different Oracle products, or different releases of the same Oracle product, in separate Oracle home directories. When you run Oracle Universal Installer, it prompts you to specify the path to this directory, and a name that identifies it. The directory that you specify must be a subdirectory of the Oracle base directory. Oracle recommends that you specify a path similar to the following for the Oracle home directory:

oracle_base/product/11.1.0/client_1

Oracle Universal Installer creates the directory path that you specify under the Oracle base directory. It also sets the correct owner, group, and permissions on it. You do not need to create this directory.

Identifying or Creating an Oracle Base DirectoryBefore starting the installation, you must either identify an existing Oracle base directory or if required, create one. This section contains information about the following:

■ Identifying an Existing Oracle Base Directory

■ Creating an Oracle Base Directory

Identifying an Existing Oracle Base DirectoryExisting Oracle base directories may not have paths that obey OFA guidelines. However, if you identify an existing Oracle Inventory directory or existing Oracle home directories, then you can usually identify the Oracle base directories, as follows:

■ Identifying an existing Oracle Inventory directory

Enter the following command to view the contents of the oraInst.loc file:

# more /var/opt/oracle/oraInst.loc

If the oraInst.loc file exists, then the output from this command is similar to the following:

inventory_loc=/u01/app/oraInventoryinst_group=oinstall

Note: All Oracle software installations rely on this directory. Ensure that you back it up regularly.

Do not delete this directory unless you have completely removed all Oracle software from the system.

Caution: During installation, you must not specify an existing directory that has predefined permissions applied to it as the Oracle home directory. If you do, then you may experience installation failure due to file and group ownership permission errors.

Note: You can choose to create an Oracle base directory, even if other Oracle base directories exist on the system.

Identifying or Creating an Oracle Base Directory


The inventory_loc parameter identifies the Oracle Inventory directory (oraInventory). The parent directory of the oraInventory directory is typically an Oracle base directory. In the previous example, /u01/app/oracle is an Oracle base directory.

■ Identifying existing Oracle home directories

Enter the following command to view the contents of the oratab file:

# more /etc/oratab

If the oratab file exists, then it contains lines similar to the following:

*:/u03/app/oracle/product/11.1.0/db_1:N*:/opt/orauser/infra_904:N*:/oracle/9.2.0:N

The directory paths specified on each line identify Oracle home directories. Directory paths that end with the user name of the Oracle software owner that you want to use are valid choices for an Oracle base directory. If you intend to use the oracle user to install the software, then you could choose one of the following directories from the previous example:

/u03/app/oracle/oracle

To continue:

■ If an Oracle base directory exists and you want to use it, then refer to the "Configuring the oracle User’s Environment" section on page 2-14.

When you configure the oracle user’s environment later in this chapter, set the ORACLE_BASE environment variable to specify the directory you chose.

■ If an Oracle base directory does not exist on the system or if you want to create an Oracle base directory, then refer to the following section.

Creating an Oracle Base DirectoryBefore you create an Oracle base directory, you must identify an appropriate file system with disk space.

To identify an appropriate file system:

1. Use the bdf command to determine the free disk space on each mounted file system.

2. From the display, identify a file system that has appropriate free space.

3. Note the name of the mount point directory for the file system that you identified.

To create the Oracle base directory and specify the correct owner, group, and permissions for it:

1. Enter commands similar to the following to create the recommended subdirectories in the mount point directory that you identified and set the appropriate owner, group, and permissions on them:

Note: If possible, choose a directory path similar to the first (/u03/app/oracle). This path complies with the OFA guidelines.

Configuring the oracle User’s Environment


# mkdir -p /mount_point/app/oracle_sw_owner# chown -R oracle:oinstall /mount_point/app/oracle_sw_owner# chmod -R 775 /mount_point/app/oracle_sw_owner

For example, if the mount point you identify is /u01 and oracle is the user name of the Oracle software owner, then the recommended Oracle base directory path is as follows:

/u01/app/oracle

2. When you configure the oracle user’s environment later in this chapter, set the ORACLE_BASE environment variable to specify the Oracle base directory that you have created.

Configuring the oracle User’s EnvironmentYou run Oracle Universal Installer from the oracle account. However, before you start Oracle Universal Installer you must configure the environment of the oracle user. To configure the environment, you must:

■ Set the default file mode creation mask (umask) to 022 in the shell startup file.

■ Set the DISPLAY environment variable.

To set the oracle user’s environment:

1. Start a new terminal session, for example, an X terminal (xterm).

2. Enter the following command to ensure that X Window applications can display on this system:


For example:


3. If you are not already logged in to the system where you want to install the software, then log in to that system as the oracle user.

4. If you are not logged in as the oracle user, then switch user to oracle:

$ su - oracle

5. To determine the default shell for the oracle user, enter the following command:

$ echo $SHELL

6. Open the oracle user’s shell startup file in any text editor:

■ C shell (csh or tcsh):

% vi .login

7. Enter or edit the following line, specifying a value of 022 for the default file mode creation mask:

umask 022

Caution: Use shell programs supported by your operating system vendor. If you use a shell program that is not supported by your operating system, then you can encounter errors during installation.



8. If the ORACLE_SID, ORACLE_HOME, or ORACLE_BASE environment variable is set in the file, then remove the appropriate lines from the file.

9. Save the file, and exit from the editor.

10. To run the shell startup script, enter one of the following commands:

■ Bash shell:

$ . ./.bash_profile

■ Bourne or Korn shell:

$ . ./.profile

■ C shell:

% source ./.login

11. If you are not installing the software on the local computer, then run the following command on the remote computer to set the DISPLAY variable:

■ Bourne, Bash or Korn shell:

$ export DISPLAY=local_host:0.0

■ C shell:

% setenv DISPLAY local_host:0.0

In this example, local_host is the host name or IP address of the local computer that you want to use to display Oracle Universal Installer.

Run the following command on the remote computer to check if the shell and the DISPLAY environmental variable are set correctly:

echo $SHELLecho $DISPLAY

Now to enable X applications, run the following commands on the local computer:

$ xhost + fully_qualified_remote_host_name

To verify that X applications display is set properly, run a X11 based program that comes with the operating system such as xclock:

$ xclock_path

In this example, xclock_path is the directory path. For example, you can find xclock at /usr/X11R6/bin/xclocks. If the DISPLAY variable is set properly, then you can see xclock on your computer screen.

12. If you determined that the /tmp directory has less than 400 MB of free disk space, then identify a file system with at least 400 MB of free space and set the TMP and TMPDIR environment variables to specify a temporary directory on this file system:

a. Use the bdf command to identify a suitable file system with sufficient free space.

See Also: PC-X Server or Operating System vendor documents for further assistance.



b. If you are not logged in as the root user, then enter the following command to switch user to root:

$ su -password:#

If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory:

# mkdir /mount_point/tmp# chmod a+wr /mount_point/tmp# exit

c. Enter commands similar to the following to set the TMP and TMPDIR environment variables:

* Bourne, Bash, or Korn shell:

$ TMP=/mount_point/tmp$ TMPDIR=/mount_point/tmp$ export TMP TMPDIR

* C shell:

% setenv TMP /mount_point/tmp% setenv TMPDIR /mount_point/tmp

13. Enter commands similar to the following to set the ORACLE_BASE environment variable:

■ Bourne, Bash, or Korn shell:

$ ORACLE_BASE=/u01/app/oracle$ export ORACLE_BASE

■ C shell:

% setenv ORACLE_BASE /u01/app/oracle

In these examples, /u01/app/oracle is the Oracle base directory that you created or identified earlier.

14. Enter the following commands to ensure that the ORACLE_HOME and TNS_ADMIN environment variables are not set:


$ unset ORACLE_HOME$ unset TNS_ADMIN

■ C shell:

% unsetenv ORACLE_HOME% unsetenv TNS_ADMIN



15. To verify that the environment has been set correctly, enter the following commands:

$ umask$ env | more

Verify that the umask command displays a value of 22, 022, or 0022 and the environment variables that you set in this section have the correct values.

Note: If the ORACLE_HOME environment variable is set, then Oracle Universal Installer uses the value that it specifies as the default path for the Oracle home directory. However, if you set the ORACLE_BASE environment variable, then Oracle recommends that you unset the ORACLE_HOME environment variable and choose the default path suggested by Oracle Universal Installer.

3

Installing Oracle Database Client 3-1

3 Installing Oracle Database Client

The Oracle Client software is available on installation media or you can download it from the Oracle Technology Network Web site. In most cases, you use the graphical user interface (GUI) provided by Oracle Universal Installer to install the software. However, you can also use Oracle Universal Installer to complete silent-mode installations, without using the GUI.

■ Reviewing Installation Guidelines

■ Accessing the Installation Software

■ Installing the Oracle Client Software

Reviewing Installation GuidelinesReview the following guidelines before starting Oracle Universal Installer:

■ Oracle Universal Installer

Do not use Oracle Universal Installer from an earlier Oracle release to install components from this release.

■ Reinstalling Oracle Software

If you reinstall Oracle software into an Oracle home directory where Oracle Database is already installed, you must also reinstall any components, such as Oracle Partitioning, that were installed before you begin the reinstallation.

Accessing the Installation SoftwareThe Oracle Client software is available on installation media or you can download it from the Oracle Technology Network Web site. To install the software from the hard disk, you must either download it from Oracle Technology Network and unpack it, or copy it from the installation media, if you have it.

You can access and install Oracle Database by using one of the following methods:

■ To install the software from a installation media or from an existing hard disk location, refer to "Installing the Oracle Client Software" on page 3-4

■ To copy the software to a hard disk, refer to "Copying the Software to the Hard Disk" on page 3-3

See Also: Appendix A for information about silent-mode installations

Accessing the Installation Software


■ To download the software from Oracle Technology Network, refer to "Downloading Oracle Software from the Oracle Technology Network Web Site" on page 3-2

Downloading Oracle Software from the Oracle Technology Network Web SiteThis section describes how to download the installation archive files and extract them on to the hard disk. It contains the following topics:

■ Downloading the Installation Archive Files

■ Extracting the Installation Files

Downloading the Installation Archive FilesTo download the installation archive files from Oracle Technology Network:

1. Use any browser to access the software download page from Oracle Technology Network:

http://www.oracle.com/technology/software/

2. Navigate to the download page for the product that you want to install.

3. On the download page, identify the required disk space by adding the file sizes for each required file.

The file sizes are listed next to the file names.

4. Select a file system with enough free space to store and expand the archive files.

In most cases, the available disk space must be at least twice the size of all of the archive files.

5. On the file system that you selected in step 4, create a parent directory for each product, for example OraDB11g, to hold the installation directories.

6. Download all of the installation archive files to the directory that you created in step 5.

7. Verify that the files you downloaded are the same size as the corresponding files on Oracle Technology Network.

Extracting the Installation FilesTo extract the installation archive files, perform the following steps:

1. If necessary, change directory to the directory that contains the downloaded installation archive files.

2. If the downloaded file has the zip extension, use the following command to extract the content:

unzip file_name.zip

If the downloaded file has the cpio.gz extension, use the following command:

$ gunzip filename.cpio.gz

This command creates files with names similar to the following:

filename.cpio

To extract the installation files, enter a command similar to the following:

Accessing the Installation Software


$ cpio -idcmv < filename.cpio

For each file, this command creates a subdirectory named Diskn, where n is the disk number identified in the file name.

When you have extracted all of the required installation files, refer to "Installing the Oracle Client Software" on page 3-4.

Copying the Software to the Hard DiskBefore installing Oracle Database, you might want to copy the software to the hard disk. This enables the installation process to run a bit faster. Before copying the installation media content to the hard disk, you must mount the disk. The following sections describe to mount disk and copy its content to the hard disk.

Mounting DisksOn most HP-UX systems, the disk mounts automatically when you insert it into the installation media. If the disk does not mount automatically, then follow these steps to mount it:

1. Switch user to root:

$ su -

2. If necessary, enter the following command to unmount the currently mounted disc, then remove it from the drive:

# /usr/sbin/umount /SD_DVD

In this example, /SD_DVD is the mount point directory for the disc drive.

3. Insert the appropriate disc into the disc drive, then enter a command similar to the following to mount it:

# /usr/sbin/mount -F cdfs -o rr /dev/dsk/cxtydz /SD_DVD

In this example, /SD_DVD is the disc mount point directory and /dev/dsk/cxtydz is the device name for the disc device, for example /dev/dsk/c0t2d0.

4. If Oracle Universal Installer is displaying the Disk Location dialog box, enter the disc mount point directory path, for example:

/SD_DVD

To continue, go to one of the following sections:

■ If you want to copy software to a hard disk, refer to "Copying the Oracle Client Software to a Hard Disk" on page 3-4.

■ If you want to install the software from the installation media, refer to "Installing the Oracle Client Software" on page 3-4.

Note: Refer to the download page for information about the correct options to use with the cpio command.

Some browsers uncompress files while downloading them, but leave the .gz file extension.

Installing the Oracle Client Software


Copying the Oracle Client Software to a Hard DiskIf the system does not have a installation media, you can copy the software from the installation media to a file system on another system, then either mount that file system using NFS, or use FTP to copy the files to the system where you want to install the software.

To copy the contents of the installation media to a hard disk:

1. Create a directory on the hard disk to hold the Oracle software:

$ mkdir OraCl11g

2. Change directory to the directory you created in step 1:

$ cd OraCl11g

3. Mount the disk, if it is not already mounted.

Some platforms automatically mount the disk when you insert it into the drive. If the disk does not mount automatically, refer to the "Mounting Disks" section on page 3-3 for platform-specific information about mounting it.

4. Copy the contents of the mounted disk to the corresponding new subdirectory as follows:

$ cp -R /directory_path OraCl11g

In this example, /directory_path is the disk mount point directory, for example /mnt/dvd on Red Hat Enterprise Linux systems, or the path of the client directory on the installation media. The mount point directory is /dvd.

5. If necessary, mount the next disk and repeat step 5.

Installing the Oracle Client SoftwareUse Oracle Universal Installer to install the Oracle Client software. The following section describes how to install the Oracle software.

Running Oracle Universal InstallerThis section describes the Basic Installation as a default setting. For any type of installation process, start Oracle Universal Installer and install the software, as follows:

1. Log on as a member of the Administrators group to the computer on which to install Oracle components.

2. If you are installing the software from installation media, mount the disk if it is not already mounted.

If the disk does not mount automatically, refer to the "Mounting Disks" section on page 3-3 for platform-specific information about mounting it.

Some platforms automatically mount the disk when you insert the installation media into the drive.

Note: If you have an existing HP-UX 11.23 installation with patch PHSS_34824 installed, then you must deinstall this patch before installing or upgrading to Oracle Database 11g Release 1. If you do not remove this patch, then Oracle Database installation fails.



3. To start Oracle Universal Installer, complete one of the following steps depending on the location of the installation files:

■ If the installation files are on disk, enter a command similar to the following, where directory_path is the path of the client directory on the installation media:

$ /directory_path/runInstaller

■ If the installation files are on the hard disk, change directory to the client directory and enter the following command:

$ ./runInstaller

If Oracle Universal Installer is not displayed, refer to the "X Window Display Errors" on page C-1 for information about troubleshooting.

4. In the Select a Product to Install screen, select Oracle Client and click Next.

5. In the Select Installation Type screen, select the type of installation that you want: Instant Client, Administrator, Runtime, or Custom and click Next.

6. In the Install Location screen, enter the following details:

■ Oracle base path: Enter the directory location for Oracle base. Do not include spaces in the path name.

■ Name: Enter the name of the Oracle home.

Do not install Oracle Client 11g release 1 (11.1) software into an existing Oracle home that contains Oracle Database 11g or earlier software. You can install Oracle Client into an existing Oracle home that contains Oracle Database Client 11g release 1 (11.1) or later software, so long as Oracle Database is not installed in the same home.

■ Oracle home path: This field is populated by default in concurrence with Oracle base location.

7. Click Next.

8. If you selected Custom in Step 5, in the Available Product Components screen, select the components you want to install and click Next or Install.

9. In the Product-specific Prerequisite Checks screen, correct any errors that Oracle Universal Installer may have found, and then click Next.

10. In the Summary screen, check the installed components listing and click Install.

11. If you have selected Custom installation types, follow steps 12 to 20 to complete the Oracle Net Configuration Assistant procedure.

If you have selected the Administrator or Runtime installation type, then Net Configuration Assistant is invoked as a part of the installation. Click Next to

Note: Start Oracle Universal Installer from the terminal session where you logged in as the oracle user and set the user’s environment (described in Chapter 2).

See Also: "Oracle Client Installation Types" for more information on these installation types.



complete the installation You should then start the Net Configuration Assistant and follow steps 12 to 20 to complete configuration process.

If you selected the Instant Client installation type, go to Step 21. After you complete the installation, you can follow the steps under "Connecting Instant Client or Instant Client Light to an Oracle Database" on page 4-4 to configure the database connection.

12. In the Oracle Net Configuration Assistant: Welcome screen, either select Perform typical configuration to use a default configuration, or select the Naming Methods configuration option. Then click Next. (The remaining steps in this procedure assume you are using Naming Methods.)

13. In the Naming Methods Configuration, Select Naming Methods screen, select the naming method you want and then click Next.

In most cases, Local Naming is sufficient.

14. In the Net Service Name Configuration, Service Name screen, enter the name of the database service to which you want to connect. Click Next.

For example, to connect to a database named sales, enter sales.

15. In the Net Service Name Configuration, Select Protocol screen, depending on the protocol you selected, enter the appropriate information and click Next.

16. In the Net Service Name Configuration, TCP/IP Protocol screen, enter the host name of the computer where the Oracle database is installed. Specify the port number, then click Next.

For example, to connect to the computer shobeen, you would enter shobeen.

17. In the Net Service Name Configuration, Test screen, click Yes to perform a test of the connection. Then click Next.

In most cases, the test fails only because the default user name and password Oracle Universal Installer supplies in the dialog box do not match the user name and password for the target database. Click Change Login, reenter the user name and password, and then click OK.

18. In the Connecting screen, click Next.

19. In the Net Service Name screen, enter the name of the net service name to use.

20. Answer the remaining prompts to complete the configuration.

21. In the End of Installation screen, click Exit, then click Yes to exit from Oracle Universal Installer.

22. Go to Chapter 4, "Oracle Database Postinstallation Tasks" to complete the postinstallation tasks.

4

Oracle Database Postinstallation Tasks 4-1

4 Oracle Database Postinstallation Tasks

This chapter describes how to complete postinstallation tasks after you have installed the software. It includes information about the following topics:

■ Required Postinstallation Tasks

■ Recommended Postinstallation Tasks

■ Required Product-Specific Postinstallation Tasks

You must perform the tasks listed in the "Required Postinstallation Tasks" section. Oracle recommends that you perform the tasks listed in the "Recommended Postinstallation Tasks" section after all installations.

If you install and intend to use any of the products listed in the "Required Product-Specific Postinstallation Tasks" section, then you must perform the tasks listed in the product-specific subsections.

Required Postinstallation TasksYou must perform the tasks described in the following sections after completing an installation:

■ Downloading and Installing Patches

■ Updating Instant Client

■ Connecting with Instant Client

Downloading and Installing PatchesCheck the My Oracle Support (formerly OracleMetaLink) Web site for required patches for the installation.

Note: This chapter describes basic configuration only. Refer to Oracle Database Administrator's Reference for Linux and UNIX, Oracle Database Administrator's Guide and product-specific administration and tuning guides for more detailed configuration and tuning information.

Note: You cannot update Instant Client by downloading a patch. Use the procedure under "Updating Instant Client" on page 4-2 to update Instant Client.

Required Postinstallation Tasks


To download required patches:

1. Use a Web browser to view the My Oracle Support (formerly OracleMetaLink) Web site:

https://support.oracle.com

2. Log in to My Oracle Support (formerly OracleMetaLink).

3. On the main My Oracle Support (formerly OracleMetaLink) page, click Patches and Updates.

4. Select Simple Search.

5. Specify the following information, then click Go:

■ In the Search By field, choose Product or Family, then specify RDBMS Server.

■ In the Release field, specify the current release number.

■ In the Patch Type field, specify Patchset/Minipack.

■ In the Platform or Language field, select your platform.

Updating Instant ClientTo update Instant Client:

1. Download Instant Client from Oracle Technology Network http://www.oracle.com/technology/index.html.

2. If you want to place the files in the existing directory, then ensure that the directory is empty.

If you want to place the files into a different directory (and remove the previous files), ensure that you update the PATH environment variable setting to reflect the new location.

Connecting with Instant ClientIf you installed the Instant Client installation type, you can configure users’ environments to enable dynamically linked client applications to connect to a database as follows:

1. Set the appropriate shared library path environment variable for the platform to specify the directory that contains the Instant Client libraries. For the Instant

Note: If you are not an My Oracle Support (formerly OracleMetaLink) registered user, click Register Here and follow the registration instructions.

Note: A restriction on using Instant Client or Instant Client Light is that you cannot perform patch upgrades on it using the opatch utility. The reason is that the Instant Client installation does not create an inventory, which the patch upgrade process must perform. The absence of an inventory also means that installed intern patch reporting and conflict detection before a patch attempt are not possible.

Recommended Postinstallation Tasks


Client installation type, this directory is the Oracle home directory that you specified during the installation, for example:

/u01/app/oracle/product/11.1.0/client_1

2. Use one of the following methods to specify database connection information for the client application:

■ Specify a SQL connect URL string using the following format:

//host:port/service_name

■ Set the TNS_ADMIN environment variable to specify the location of the tnsnames.ora file and specify a service name from that file.

■ Set the TNS_ADMIN environment variable and set the TWO_TASK environment variable to specify a service name from the tnsnames.ora file.

Recommended Postinstallation TasksOracle recommends that you perform the tasks described in the following section after completing an installation:

■ Configuring Instant Client Light

■ Creating a Backup of the root.sh Script

■ Connecting Instant Client or Instant Client Light to an Oracle Database

■ Setting Up User Accounts

■ Setting the NLS_LANG Environment Variable

■ Generating the Client Static Library

Configuring Instant Client LightWhen you install Instant Client, the Instant Client libraries are installed under the ORACLE_HOME directory and the Instant Client Light specific library is installed under the ORACLE_HOME/light directory. To configure Instant Client Light, you must replace the following files:

■ On HP-UX PA-RISC:

$ORACLE_HOME/libociei.sl with $ORACLE_HOME/light/libociicus.sl

■ On HP-UX Itanium:

$ORACLE_HOME/libociei.so with $ORACLE_HOME/light/libociicus.so

After replacing the library file, you must set the following environment variable to point to the location of the Instant Client shared library files:

■ On HP-UX PA-RISC:

SHLIB_PATH

■ On HP-UX Itanium:

LD_LIBRARY_PATH

Note: You do not have to specify the ORACLE_HOME environment variable.



Creating a Backup of the root.sh ScriptOracle recommends that you back up the root.sh script after you complete an installation. If you install other products in the same Oracle home directory, then Oracle Universal Installer updates the contents of the existing root.sh script during the installation. If you require information contained in the original root.sh script, then you can recover it from the backed up root.sh file.

Connecting Instant Client or Instant Client Light to an Oracle DatabaseBefore you can connect Instant Client (including Instant Client Light) to an Oracle database, ensure that the LD_LIBRARY_PATH environment variable specifies the directory that contains the Instant Client libraries. This directory is the ORACLE_HOME directory that you specified during installation.

For example, the shared libraries for Instant Client or Instant Client Light (if you have configured Instant Client Light), are in:

/u01/app/oracle/product/11.1.0/client_1

After you have checked the LD_LIBRARY_PATH environment variable, you can use any of the following methods to specify Oracle Database connection information for client applications:

■ Specifying a Connection by Using the Easy Connect Naming Method

■ Specifying a Connection by Configuring a tnsnames.ora File

■ Specifying a Connection by Using an Empty Connect String and the TWO_TASK Environment Variable

Specifying a Connection by Using the Easy Connect Naming MethodYou can specify a connection address to an Oracle Database directly from a client application, without having to configure a tnsnames setting for the Instant Client. This method is convenient in that you do not have to create and manage a tnsnames.ora file. However, the application users must specify the host name and port number when they want to log in to the application.

For example, you run SQL*Plus on the client computer and want to connect to the sales_us database, which is located on a server whose host name is shobeen and port number is 1521, then you can log in as follows:

Enter user-name: system@admin@//shobeen:1521/sales_us

Similarly, in the application code, you can use Oracle Call Interface net naming methods to create the Instant Client-to-Oracle Database connection. For example, the following formats in the OCIServerAttach() call specify the connection information:

■ Specify a SQL connect URL string using the following format:

//host[:port][/service_name]

For example:

//shobeen:1521/sales_us

■ Alternatively, you can specify the SQL connect information as an Oracle Net keyword-value pair. For example:

"(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp) (HOST=shobeen) (PORT=1521))



(CONNECT_DATA=(SERVICE_NAME=sales_us)))"

Specifying a Connection by Configuring a tnsnames.ora FileBy default, when you install Instant Client, Oracle Universal Installer does not include a sample tnsnames.ora file nor the Oracle Net Configuration Assistant utility normally used to create it. However, if you want to shield users from having to specify actual host names and port numbers, you may want to consider using a tnsnames.ora file to set the Client-to-Oracle Database connection.

You can create the tnsnames.ora file manually by copying and modifying a version of this file from another Oracle installation, or you can use Oracle Net Configuration Assistant to create and manage it for you.

To install Oracle Net Configuration Assistant:

1. Run Oracle Universal Installer.

2. Select the Custom installation type.

3. In the Summary screen, click Install, then click Exit and Yes to exit Oracle Universal Installer.

On each client computer, configure either of the following settings:

■ Set the TNS_ADMIN environment variable to specify the location of the tnsnames.ora file and specify a service name from that file.

■ Place the tnsnames.ora file in the $ORACLE_HOME/network/admin directory, and ensure that the ORACLE_HOME environment has been set to this Oracle home.

Specifying a Connection by Using an Empty Connect String and the TWO_TASK Environment VariableYou can set the connect string to an empty connect string (""), and then set the TWO_TASK environment variable to one of the following values:

■ A direct address, as described under "Specifying a Connection by Using the Easy Connect Naming Method" on page 4-4

■ Oracle Net keyword-value pair

■ A tnsnames.ora entry and TNS_ADMIN is set to the location of tnsnames.ora

■ A tnsnames.ora entry and the following:

– tnsnames.ora file located in $ORACLE_HOME/network/admin

– The ORACLE_HOME environment variable set to this Oracle home

This method allows the applications to specify internally a connection string if the application code itself uses an empty connection string. The benefit of an empty connect string is that the application itself does not need to specify the tnsnames.ora entry. Instead, when a user invokes the application, the location of the database is determined by a script or the environment, depending on where you have set the TWO_TASK environment variable. The disadvantage of using empty strings is that you must configure this additional information in order for the application to connect to the database.

See Also: Oracle Call Interface Programmer's Guide for more information on using Oracle Call Interface Instant Client

See Also: Oracle Call Interface Programmer's Guide for more information on Oracle Call Interface Instant Client connection strings

Required Product-Specific Postinstallation Tasks


Setting Up User AccountsFor information about setting up additional user accounts, refer to Oracle Database Administrator's Reference for Linux and UNIX.

Setting the NLS_LANG Environment VariableNLS_LANG is an environment variable that specifies the locale behavior for Oracle software. This variable sets the language and territory used by the client application and the database server. It also declares the character set of the client, which is the character set of data entered or displayed by an Oracle client program, such as SQL*Plus.

Generating the Client Static LibraryThe client static library (libclntst11.a) is not generated during installation. If you want to link the applications to the client static library, you must first generate it as follows:

1. Switch user to oracle.

2. Set the ORACLE_HOME environment variable to specify the Oracle home directory used by the Oracle Database installation. For example:


$ ORACLE_HOME=/u01/app/oracle/product/11.1.0/db_1 $ export ORACLE_HOME

■ C shell:

% setenv ORACLE_HOME /u01/app/oracle/product/11.1.0/db_1

3. Enter the following command:

$ $ORACLE_HOME/bin/genclntst

Required Product-Specific Postinstallation TasksThe following sections describe platform-specific postinstallation tasks that you must perform if you install and intend to use the products mentioned:

■ Configuring Oracle Net Services

■ Configuring Oracle Precompilers

See Also: Appendix B, "Configuring Oracle Database Globalization Support" for more information about the NLS_LANG environment variable

Note: The character set of the data displayed is determined by the environment of the operating system, such as keyboard driver and fonts in use. The NLS_LANG character set should match the operating system.

Note: You need only perform postinstallation tasks for products that you intend to use.



Configuring Oracle Net ServicesIf you have an earlier release of Oracle software installed on this system, you might want to copy information from the Oracle Net tnsnames.ora and listener.ora configuration files from the earlier release to the corresponding files for the new release.

If necessary, you can also add connection information for additional database instances to the new file.

Configuring Oracle PrecompilersThis section describes postinstallation tasks for Oracle precompilers:

■ Configuring Pro*C/C++

■ Configuring Pro*FORTRAN

Configuring Pro*C/C++Verify that the PATH environment variable setting includes the directory that contains the C compiler executable.

Table 4–1 shows the default directories and the appropriate command to verify the path setting of the compiler.

Configuring Pro*FORTRANVerify that the PATH environment variable setting includes the directory that contains the FORTRAN compiler executable. You can verify the path setting by using the whichf90 command.

Note: The default location for the tnsnames.ora and listener.ora files is the $ORACLE_HOME/network/admin/ directory. However, you can also use a central location for these files.

Note: All precompiler configuration files are located in the $ORACLE_HOME/precomp/admin directory.

Table 4–1 C/C++ Compiler Directory

Path Command

/usr/bin $ which gcc

/opt/ansic/bin $ which cc

5

Removing Oracle Software 5-1

5 Removing Oracle Software

This chapter describes how to completely remove all Oracle software from an Oracle home directory.

Removing Oracle SoftwareThe following steps describe how to use Oracle Universal Installer to remove Oracle software from an Oracle home:

1. If necessary, log in as the oracle user:

$ su - oracle

2. Set the ORACLE_HOME environment variable to specify the path of the Oracle home directory that you want to remove:


$ ORACLE_HOME=/u01/app/oracle/product/11.1.0/db_1 $ export ORACLE_HOME

■ C shell:

% setenv ORACLE_HOME /u01/app/oracle/product/11.1.0/db_1

3. Start Oracle Universal Installer as follows:

$ $ORACLE_HOME/oui/bin/runInstaller

4. In the Welcome window, click Deinstall Products.

The Inventory screen appears, listing all of the Oracle homes on the system.

5. In the Inventory screen, select the Oracle home and the products that you want to remove, then click Remove.

Note: Always use Oracle Universal Installer to remove Oracle software. Do not delete any Oracle home directories without first using Oracle Universal Installer to remove the software.

Note: If you choose to remove Oracle JVM, Oracle Universal Installer removes all installed products that depend on Oracle JVM, including Oracle Database 11g.

Removing Oracle Software


Oracle Universal Installer displays a confirmation window asking you to confirm that you want to deinstall the products and their dependent components.

6. Click Yes.

Oracle Universal Installer displays a progress indicator as it removes the software.

7. Click Close on the Inventory screen.

8. When the products have been deleted, click Cancel to exit from Oracle Universal Installer, and then click Yes.

A

Installing and Configuring Oracle Database Using Response Files A-1

A Installing and Configuring Oracle DatabaseUsing Response Files

This appendix describes how to install and configure Oracle products using response files. It includes information about the following topics:

■ How Response Files Work?

■ Preparing a Response File

■ Running Oracle Universal Installer Using a Response File

How Response Files Work?You can automate the installation and configuration of Oracle software, either fully or partially, by specifying a response file when you start Oracle Universal Installer. Oracle Universal Installer uses the values contained in the response file to provide answers to some or all of Oracle Universal Installer prompt. It includes information about the following topics:

■ Reasons for Using Silent Mode or Noninteractive Mode

■ General Procedure for Using Response Files

Typically, Oracle Universal Installer runs in interactive mode, which means that it prompts you to provide information in graphical user interface (GUI) screens. When you use response files to provide this information, you run Oracle Universal Installer at a command prompt using either of the following modes:

■ Silent mode

If you include responses for all of the prompts in the response file and specify the -silent option when starting Oracle Universal Installer, then Oracle Universal Installer runs in silent mode. During a silent-mode installation, Oracle Universal Installer does not display any screens. Instead, it displays progress information in the terminal that you used to start it.

■ Noninteractive (or suppressed) mode

If you include responses for some or all of the prompts in the response file and omit the -silent option, then Oracle Universal Installer runs in suppressed mode. During a suppressed-mode installation, Oracle Universal Installer displays only the screens for which you did not specify all required information. You can also use variables in the response file or command-line options to suppress other installer screens, such as the Welcome screen or Summary screen, that do not prompt for information.

How Response Files Work?

A-2 Oracle Database Client Installation Guide

You define the settings for a silent or noninteractive installation by entering values for the variables listed in the response file. For instance, to specify the Oracle home name, you would supply the appropriate value for the ORACLE_HOME_NAME variable, as in the following example:

ORACLE_HOME_NAME="OraCLHome1"

Another way of specifying the response file’s variable settings is to pass them as command line arguments when you run Oracle Universal Installer. For example:

-silent "ORACLE_HOME_NAME=OraDBHome1" ...

In this command, directory_path is the path of the database directory on the DVD or the path of the Disk1 directory on the hard drive.

This method is particularly useful if you do not want to embed sensitive information, such as passwords, in the response file. For example:

-silent "s_dlgRBOPassword=binks342" ...

Ensure that you enclose the variable and its setting in quotes.

Reasons for Using Silent Mode or Noninteractive ModeThe following table describes several reasons why you might want to run Oracle Universal Installer in silent mode or suppressed mode.

General Procedure for Using Response FilesThe following are the general steps to install and configure Oracle products using Oracle Universal Installer in silent or suppressed mode:

See Also: Oracle Universal Installer and OPatch User's Guide for more information about response file formats.

Mode Uses

Silent Use silent mode if you want to:

■ Complete an unattended installation, which you might schedule using operating system utilities such as at

■ Complete several similar installations on multiple systems without user interaction

■ Install the software on a system that does not have X Window System software installed on it

Oracle Universal Installer displays progress information in the terminal that you used to start it, but it does not display any of Oracle Universal Installer screens.

Suppressed (noninteractive)

Use suppressed mode if you want to complete similar Oracle software installations on more than one system, providing default answers to some, but not all of Oracle Universal Installer prompts.

If you do not specify information required for a particular Installer screen in the response file, then Oracle Universal Installer displays that screen. It suppresses screens for which you have provided all of the required information.

Preparing a Response File


1. Create the oraInst.loc file.

2. Prepare a response file.

3. Run Oracle Universal Installer in silent or suppressed mode.

4. If you completed a software-only installation, then run Net Configuration Assistant and Database Configuration Assistant in silent or noninteractive mode if required.

These steps are described in the following sections.

Preparing a Response FileThis section describes the following methods to prepare a response file for use during silent-mode or suppressed-mode installations:

■ Editing a Response File Template

■ Recording a Response File

Editing a Response File TemplateThis method is most useful for the Enterprise Edition or Standard Edition installation types.

Oracle provides response file templates for each product and installation type, and for each configuration tool. These files are located at database/response directory on the installation media.

Table A–1 lists the response files provided with Oracle Database.

To copy and modify a response file:

1. Copy the response file from the response file directory to a directory on your system:

$ cp /directory_path/response/response_file.rsp local_directory

Note: You must complete all required preinstallation tasks on a system before running Oracle Universal Installer in silent or suppressed mode.

Note: If you copied the software to a hard disk, the response files are located in the database/response directory.

Table A–1 Response Files

Response File Description

instantClient.rsp Instant Client installation of Oracle Client

clientadmin.rsp Administrator installation of Oracle Client

clientruntime.rsp Runtime installation of Oracle Client

clientcustom.rsp Custom installation of Oracle Client

Preparing a Response File


In this example, directory_path is the path to the database directory on the installation media. If you have copied the software to a hard drive, then you can edit the file in the response directory if you prefer.

2. Open the response file in a text editor:

$ vi /local_dir/response_file.rsp

In addition to editing settings specific to the Oracle Database installation, check that the FROM_LOCATION path is correct and points to the products.xml file in the stage directory in the installation media. You may want to set this variable to point to an absolute path, for example:

FROM_LOCATION="/directory_path/stage/products.xml"

Remember that you can specify sensitive information, such as passwords, at the command line rather than within the response file. "How Response Files Work?" on page A-1 explains this method.

3. Follow the instructions in the file to edit it.

Recording a Response FileYou can use Oracle Universal Installer in interactive mode to record a response file, which you can edit and then use to complete silent-mode or suppressed-mode installations. This method is useful for custom or software-only installations.

When you record the response file, you can either complete the installation, or you can exit from Oracle Universal Installer on the Summary page, before it starts to copy the software to the system.

If you use record mode during a noninteractive mode installation, then Oracle Universal Installer records the variable values that were specified in the original source response file into the new response file.

To record a response file:

1. Complete the preinstallation tasks listed in Chapter 2.

When you run Oracle Universal Installer to record a response file, it checks the system to verify that it meets the requirements to install the software. For this reason, Oracle recommends that you complete all of the required preinstallation tasks and record the response file while completing an installation.

2. If you have not installed Oracle software on this system previously, create the oraInst.loc file, as described in the previous section.

See Also: Oracle Universal Installer and OPatch User's Guide for detailed information on creating response files

Note: Oracle Universal Installer or configuration assistant fails if you do not correctly configure the response file. Refer to "Silent-Mode Response File Error Handling" section on page C-4 for more information about troubleshooting a failed silent-mode installation.

Note: You cannot use record mode to create a response file during an installation that uses the Basic installation method.

Running Oracle Universal Installer Using a Response File


3. Ensure that the Oracle software owner user (typically oracle) has permissions to create or write to the Oracle home path that you will specify when you run Oracle Universal Installer.

4. To record a response file, enter a command similar to the following to start Oracle Universal Installer:

$ /directory_path/runInstaller -record -destinationFile response_filename

In this command:

■ directory_path is the path of the database directory on the DVD or the path of the Disk1 directory on the hard drive

■ The -record parameter specifies that you want to record the responses that you enter in a response file

■ response_filename is the full path and file name of the response file that you want to record

5. On each Oracle Universal Installer screen, specify the required information.

6. When Oracle Universal Installer displays the Summary screen, perform one of the following actions:

■ Click Install to create the response file, then continue with the installation.

■ Click Cancel and then Yes to create the response file but exit from Oracle Universal Installer without installing the software.

The response file is saved in the location that you specified using the -destinationFile option.

7. If you do not complete the installation, then delete the Oracle home directory that Oracle Universal Installer created using the path you specified on the Specify File Locations screen.

8. Before using the recorded response file on another system, edit the file and make any required changes.

Use the instructions in the file as a guide when editing it.

Running Oracle Universal Installer Using a Response FileNow, you are ready to run Oracle Universal Installer at the command line, specifying the response file you created, to perform the installation. The Oracle Universal Installer executable, runInstaller, provides several options. For help information on the full set of these options, run the runInstaller command with the -help option, for example:

$ directory_path/runInstaller -help

The help information appears in a window after some time.

To run Oracle Universal Installer using a response file:

1. Complete the preinstallation tasks listed in Chapter 2.

2. Log in as the Oracle software owner user (typically oracle).

Note: Do not specify a relative path to the response file. If you specify a relative path, then Oracle Universal Installer fails.

Running Oracle Universal Installer Using a Response File


3. If you are completing a suppressed-mode installation, set the DISPLAY environment variable.

4. To start Oracle Universal Installer in silent or suppressed mode, enter a command similar to the following:

$ /directory_path/runInstaller [-silent] [-noconfig] \ -responseFile responsefilename

In this example:

■ directory_path is the path of the database directory on the DVD or the path of the Disk1 directory on the hard drive.

■ -silent indicates that you want to run Oracle Universal Installer in silent mode.

■ -noconfig suppresses running the configuration assistants during installation, and a software-only installation is performed instead.

■ responsefilename is the full path and file name of the installation response file that you configured.

5. When the installation completes, log in as the root user and run the root.sh script:

$ su -password:# /oracle_home_path/root.sh

Note: You do not have to set the DISPLAY environment variable if you are completing a silent-mode installation.

Note: Do not specify a relative path to the response file. If you specify a relative path, then Oracle Universal Installer fails.

Note: For more information about other options for the runInstaller command, enter the following command:

$ /directory_path/runInstaller -help

B

Configuring Oracle Database Globalization Support B-1

B Configuring Oracle Database GlobalizationSupport

This appendix describes the following Globalization Support topics:

■ Installing and Using Oracle Components in Different Languages

■ Running Oracle Universal Installer in Different Languages

Installing and Using Oracle Components in Different LanguagesThis section describes the following procedures:

■ Configuring Oracle Components to Run in Different Languages

■ Installing Translation Resources

Configuring Oracle Components to Run in Different LanguagesYou can specify the language and the territory, or locale, in which you want to use Oracle components. The locale setting of a component determines the language of the user interface of the component and the globalization behavior, such as date and number formatting. Depending on the Oracle component, the locale of the component is either inherited from the operating system session that started the component, or is defined by the NLS_LANG environment variable.

The operating system locale usually influences Oracle components that are based on Java technology. The NLS_LANG environment variable usually influences Oracle components that use Oracle Client libraries such as OCI.

Determining the Operating System Locale by Using the LANG Environment VariableThe locale setting of your operating system session determines the language of the user interface and the globalization behavior for components such as Oracle Universal Installer, Oracle Net Configuration Assistant, and Oracle Database Configuration Assistant. It also determines the globalization behavior of Oracle Database sessions created by a user application through Oracle JDBC driver, unless overridden by the application.

Note: The user interface of an Oracle component will be displayed in a selected language only if the appropriate translation is available and has been installed. Otherwise, the user interface will be displayed in English.

Installing and Using Oracle Components in Different Languages

B-2 Oracle Database Client Installation Guide

The operating system locale on HP-UX is determined by the value of the LANG environment variable. Depending on your desktop environment, such as CDE, GNOME, or telnet, you can select a default session locale on a login screen, in a configuration panel, or in a configuration file.

You can modify the LANG variable in the environment of your shell to start an Oracle component in a selected language.

For example, to start Oracle Database Configuration Assistant in German, enter one of the following commands:

■ C shell (csh):

$ (setenv LANG de_DE.iso88591; dbca)

■ Bourne shell (sh) or Korn shell (ksh):

$ LANG=de_DE.iso88591 dbca

To modify the operating system locale for all Oracle components started from now on by the given shell, modify the LANG variable using one of the following commands:

■ C shell (csh):

$ setenv LANG de_DE.iso88591$ ...

■ Bourne shell (sh) or Korn shell (ksh):

$ LANG=de_DE.iso88591; export LANG$ ...

The value of the LANG environment variable must be a valid operating system locale. To see the list of valid locales, enter the following command:

$ locale -a

Configuring Locale and Character Sets by Using the NLS_LANG Environment VariableThe NLS_LANG environment variable determines the language of the user interface and the globalization behavior for components such as SQL*Plus, exp, and imp. It sets

Note: Refer to the operating system documentation on how to select a locale for the operating system session in your desktop environment.

Note: The LC_ALL environment variable overrides the value of the LANG environment variable. For the commands listed in this section to work, either ensure that the LC_ALL environment variable is not set in the environment, or substitute LC_ALL for LANG.

Note: Refer to the operating system documentation for a mapping between values of the LANG environment variable and the languages and territories that they represent.

Installing and Using Oracle Components in Different Languages

Configuring Oracle Database Globalization Support B-3

the language and territory used by the client application and the database. It also declares the character set for entering and displaying data by the client application.

The NLS_LANG environment variable uses the following format:

NLS_LANG=language_territory.characterset

In this format:

■ language specifies the language used for displaying user interface, error messages, sorting, day names, and month names

■ territory specifies the conventions for default date, monetary and numeric formats

■ characterset specifies the encoding used by the client application

In most cases, this is the Oracle character set that corresponds to the character set of the user terminal or the operating system.

The NLS_LANG environment variable is set as a local environment variable for the shell on all UNIX-based platforms. For example, if the operating system locale setting is en_US.utf8, then the corresponding value of NLS_LANG environment variable is AMERICAN_AMERICA.AL32UTF8.

The following examples illustrate some of the valid values for the NLS_LANG environment variable.

Installing Translation ResourcesTo view the user interface of Oracle components in different languages, you must install the appropriate language translations along with the component. To select the translation resources that you want to install:

1. Start Oracle Universal Installer.

2. On the Select Installation Type screen, click Product Languages.

3. On the Language Selection screen, select the language in which you want to use Oracle components from the Available Languages field.

See Also: Oracle Database Globalization Support Guide for information about the NLS_LANG and other Globalization Support parameters

Note: Refer to the operating system documentation for information on how to determine the operating system locale environment setting.

Operating System Locale NLS_LANG Values

French (France) FRENCH_FRANCE.WE8ISO8859P15FRENCH_FRANCE.WE8ISO8859P1FRENCH_FRANCE.WE8MSWIN1252FRENCH_FRANCE.AL32UTF8

Japanese (Japan) JAPANESE_JAPAN.JA16EUCJAPANESE_JAPAN.JA16SJISJAPANESE_JAPAN.AL32UTF8

Running Oracle Universal Installer in Different Languages

B-4 Oracle Database Client Installation Guide

4. Use the > arrow to move the selected language to the Selected Languages field, and then click OK.

5. Select the products you want, and then click Next.

Running Oracle Universal Installer in Different LanguagesYour operating system locale determines the language in which Oracle Universal Installer runs. Oracle Universal Installer may run in one of the following languages:

■ Brazilian Portuguese (pt_BR)

■ French (fr)

■ German (de)

■ Italian (it)

■ Japanese (ja)

■ Korean (ko)

■ Simplified Chinese (zh_CN)

■ Spanish (es)

■ Traditional Chinese (zh_TW)

To run Oracle Universal Installer in one of the available languages, change the locale in which your operating system session is running before you start Oracle Universal Installer with the ./runInstaller command. If the selected language is not one of the listed previoulsly, Oracle Universal Installer runs in English.

You must ensure that the selected value for the LANG environment variable starts with the appropriate language abbreviation. In the aforementioned list of languages, in which Oracle Universal Installer can run, the required abbreviation appears in parentheses beside the language name. For example, fr_FR and fr_CA are valid values to run the Oracle Universal Installer in French.

Note: The Available Languages field lists all languages supported by Oracle globalization libraries. The set of languages for which a translation is actually available is usually smaller and depends on a particular component. The scope of translation for a given component may differ between languages. For example, some translations may include all user interface text, while others may include only error messages and no help files.

Note: Oracle Universal Installer will ignore languages in the Selected Languages field for which no translation is available.

C

Troubleshooting C-1

C Troubleshooting

This appendix contains information about troubleshooting. It includes information about the following topics:

■ Verify Requirements

■ X Window Display Errors

■ What to Do If an Installation Error Occurs?

■ Reviewing the Log of an Installation Session

■ Troubleshooting Configuration Assistants

■ Silent-Mode Response File Error Handling

■ Cleaning Up After a Failed Installation

Verify RequirementsBefore performing any of the troubleshooting steps in this appendix, ensure that the system meets the requirements and that you have completed all of the preinstallation tasks specified in Chapter 2.

Read the Release NotesRead the release notes for the product before installing it. The release notes are available on the Oracle Database 11g DVD. The latest version of the release notes is also available on the Oracle Technology Network Web site:

http://www.oracle.com/technology/documentation/

X Window Display ErrorsIf you run Oracle Universal Installer on a remote system and you want to display Oracle Universal Installer’s user interface on your local system, you might see error messages similar to the following:

"Failed to connect to server""Connection refused by server""Can’t open display"

If you see one of these error messages, follow these steps:

What to Do If an Installation Error Occurs?

C-2 Oracle Database Client Installation Guide

1. In a local terminal window, log in as the user that started the X Window session.

2. Enter the following command:


For example:


3. Enter the following commands, where workstation_name is the host name or IP address of your workstation:


$ DISPLAY=workstation_name:0.0$ export DISPLAY

■ C shell:

% setenv DISPLAY workstation_name:0.0

4. To determine whether X Window applications display correctly on the local system, enter the following command:

$ xclock

The X clock should appear on your monitor.

5. If the X clock appears, close the X clock and start Oracle Universal Installer again.

What to Do If an Installation Error Occurs?If you encounter an error during installation:

■ Do not exit Oracle Universal Installer.

■ If you clicked Next after you entered incorrect information on one of the installation screens, click Back to return to the screen and correct the information.

■ If you encounter an error while Oracle Universal Installer is copying or linking files, refer to "Reviewing the Log of an Installation Session" section on page C-2.

■ If you encounter an error while a configuration assistant is running, refer to "Troubleshooting Configuration Assistants" section on page C-3.

■ If you cannot resolve the problem, remove the failed installation by following the steps listed in the "Cleaning Up After a Failed Installation" section on page C-4.

Reviewing the Log of an Installation SessionDuring an installation, Oracle Universal Installer records all of the actions that it performs in a log file. If you encounter problems during the installation, review the log file for information about possible causes of the problem.

Note: This procedure applies only to users of UNIX workstations. If you are using a PC or other system with X server software installed, refer to the X server documentation for information about how to permit remote systems to display X applications on the local system.

Troubleshooting Configuration Assistants

Troubleshooting C-3

To view the log file, follow these steps:

1. If necessary, enter the following command to determine the location of the oraInventory directory:

$ cat /var/opt/oracle/oraInst.loc

The inventory_loc parameter in this file specifies the location of the oraInventory directory.

2. Enter the following command to change directory to Oracle Universal Installer log file directory, where orainventory_location is the location of the oraInventory directory:

$ cd /orainventory_location/logs

3. Enter the following command to determine the name of the log file:

$ ls -ltr

This command lists the files in the order of creation, with the most recent file shown last. Installer log files have names similar to the following, where date_time indicates the date and time that the installation started:

installActionsdate_time.log

4. To view the most recent entries in the log file, where information about a problem is most likely to appear, enter a command similar to the following:

$ tail -50 installActionsdate_time.log | more

This command displays the last 50 lines in the log file.

5. If the error displayed by Oracle Universal Installer or listed in the log file indicates a relinking problem, refer to the following file for more information:

$ORACLE_HOME/install/make.log

Troubleshooting Configuration AssistantsTo troubleshoot an installation error that occurs when a configuration assistant is running:

■ Review the installation log files listed in the "Reviewing the Log of an Installation Session" section on page C-2.

■ Review the specific configuration assistant log file located in the $ORACLE_HOME/cfgtoollogs directory. Try to fix the issue that caused the error.

■ If you see the "Irrecoverable Error. Reinstall" message, look for the cause of the problem by reviewing the log files. Refer to "Irrecoverable Errors" on page C-4 for further instructions.

Configuration Assistant FailureOracle configuration assistant failures are noted at the bottom of the installation screen. The configuration assistant interface displays additional information, if available. The configuration assistant execution status is stored in the following file:

oraInventory_location/logs/installActionsdate_time.log

The execution status codes are listed in the following table:

Silent-Mode Response File Error Handling


Irrecoverable ErrorsIf you receive a irrecoverable error while a configuration assistant is running, you must remove the current installation and reinstall the Oracle software, as follows:

1. Remove the failed installation as described in the "Cleaning Up After a Failed Installation" section on page C-4.

2. Correct the cause of the irrecoverable error.

3. Reinstall the Oracle software.

Silent-Mode Response File Error HandlingTo determine whether a silent-mode installation succeeds or fails, refer to the following log file:

/oraInventory_location/logs/silentInstalldate_time.log

If necessary, refer to the previous section for information about determining the location of the oraInventory directory.

A silent installation fails if:

■ You do not specify a response file

■ You specify an incorrect or incomplete response file

For example, a common problem is that while all the product-specific data is filled out correctly, the staging area location may be incorrect. If this is the case, check the FROM_LOCATION variable and ensure that it points to the products.xml file in the installation media. In the installation media, this products.xml is in response/stage.

■ Oracle Universal Installer encounters an error, such as insufficient disk space

Oracle Universal Installer or configuration assistant validates the response file at run time. If the validation fails, the silent-mode installation or configuration process ends. Oracle Universal Installer treats values for parameters that are of the wrong context, format, or type as if no value was specified in the file.

Cleaning Up After a Failed InstallationIf an installation fails, you must remove files that Oracle Universal Installer created during the attempted installation and remove the Oracle home directory. Perform the following steps to remove the files:

1. Start Oracle Universal Installer as described in "Installing the Oracle Client Software" on page 3-4.

2. Click Deinstall Products on the Welcome window or click Installed Products on any Installer window.

The Inventory window appears, listing installed products.

Status Result Code

Configuration assistant succeeded 0

Configuration assistant failed 1

Configuration assistant cancelled -1

Cleaning Up After a Failed Installation

Troubleshooting C-5

3. Select the Oracle home that contains the products that you want to remove, then click Remove.

4. Manually remove the Oracle home directory created during the failed installation.

5. Reinstall the Oracle software.

To reinstall, you must drop either one or two database schemas, depending upon the installation type.

Cleaning Up After a Failed Installation


D

Frequently Asked Questions About Installation D-1

D Frequently Asked Questions AboutInstallation

Use the following guidelines to decide how to install Oracle Database components:

■ Installing Oracle Database or Oracle Client

■ Installing Oracle Database Tools

■ Installing Oracle Database with Oracle Applications

■ Installing Oracle Database Heterogeneous Connectivity Tools (Gateways)

Installing Oracle Database or Oracle ClientThe following are frequently asked questions about installing Oracle database:

■ I only need one instance of Oracle Database or I just want to install a test database to get familiar with the product. How do I install Oracle Database for these situations?

■ How can I create an Oracle database that can handle transaction-heavy or data warehousing applications?

■ What’s the best way to install multiple Oracle databases?

■ How do I configure client connections to an Oracle database?

■ What is the best way to install Oracle Client if my client nodes have limited disk space?

■ How do I upgrade Oracle Database?

■ The computers at my site have been configured to run as a cluster. How should I install Oracle Database?

■ How do I migrate my non-Oracle databases to Oracle Database?

I only need one instance of Oracle Database or I just want to install a test database to get familiar with the product. How do I install Oracle Database for these situations?■ If you want a quick installation using the default installation settings, then refer to

the platform-specific Oracle Database Quick Installation Guide.

Note: Some Oracle Database components may not be available on all platforms. Consult your platform-specific installation guide or release notes.

Installing Oracle Database or Oracle Client

D-2 Oracle Database Client Installation Guide

■ If your site has special requirements, then refer to platform-specific Oracle Database Installation Guide for more information.

How can I create an Oracle database that can handle transaction-heavy or data warehousing applications?If you want to create a starter database designed for transaction-heavy or data warehousing applications, then refer to platform-specific Oracle Database Installation Guide for more details. Select the Advanced Installation method, and then select the database type you want on the Select Database Configuration screen.

Alternatively, you can install Oracle OLAP during the Oracle Database installation. Oracle OLAP provides optimal support for database environments that must meet OLAP requirements. To do so, select Advanced Installation, then Custom, and on the Available Product Components screen, select Oracle OLAP.

What’s the best way to install multiple Oracle databases?Use platform-specific Oracle Database Installation Guide to install Oracle Database using either of the following methods:

■ Installing with response files: This method lets you run Oracle Universal Installer at a command line using a response file that contains settings specific to each computer.

■ Cloning an existing Oracle home: Install Oracle Database in one computer using interactive mode. Afterwards, you can clone its existing Oracle home in each location and then create a new database from there. You can also clone databases, which is described in Oracle Database Administrator's Guide.

How do I configure client connections to an Oracle database?1. Install Oracle Database on a server by using platform-specific Oracle Database

Installation Guide for more information.

2. Use this guide to install Oracle Client on each client node, and select the Instant Client installation type.

If you have many client nodes, consider staging the software centrally, mapping the drive, and running Oracle Universal Installer in the noninteractive mode.

If the client nodes only require a default installation into a new Oracle home directory, consider using platform-specific Oracle Database Installation Guide for more information.

What is the best way to install Oracle Client if my client nodes have limited disk space?1. Install Oracle Database onto a server by using platform-specific Oracle Database

Installation Guide for more details.

2. Use this guide to install Oracle Client on each client node, and select the Instant Client installation type.

See Also: Oracle Database Data Warehousing Guide after installation

See Also:

■ Oracle OLAP User's Guide

■ Oracle OLAP DML Reference

■ Oracle OLAP Java API Reference

Installing Oracle Database Tools


If you have many client nodes, then consider running Oracle Universal Installer in noninteractive mode.

How do I upgrade Oracle Database?Refer to Oracle Database Upgrade Guide.

The computers at my site have been configured to run as a cluster. How should I install Oracle Database?Use any of the following installation scenarios:

■ If you want to run a single-instance Oracle Database in a clustered environment, then install Oracle Clusterware either before or after you install Oracle Database.

■ If you want a consolidated pool of storage for all databases in a cluster, then install Oracle Clusterware first and use Automatic Storage Management to manage this storage. Afterwards, install Oracle Database (which can be either single instance or Real Application Clusters).

■ If you plan to use Oracle Real Application Clusters, first install Oracle Clusterware, and then install Oracle Real Application Clusters.

Refer to platform-specific Oracle Clusterware Installation Guide andOracle Real Application Clusters Installation Guide for HP-UX for the platform to install Oracle Clusterware or Oracle Real Application Clusters. Oracle Clusterware is available on the Oracle Clusterware installation media. Refer to platform-specific Oracle Database Installation Guide which explains how to install Automatic Storage Management and Oracle Database.

Oracle Clusterware is a key component required by Oracle Real Application Clusters installations. Oracle Clusterware is an integrated cluster management solution that can bind multiple servers together to act as a single system. This is referred to as a cluster. It performs workload management and component restart. For example, when an instance supporting a particular service fails, Oracle Clusterware restarts the service on the next available instance that you have configured for that service. Oracle Clusterware can monitor non-Oracle programs, as long as they are defined within the Oracle Clusterware environment using the High Availability API.

How do I migrate my non-Oracle databases to Oracle Database?Use Oracle Migration Workbench to migrate your non-Oracle databases and applications to Oracle. Oracle Migration Workbench software and documentation are available at:

http://www.oracle.com/technology/tech/migration/index.html

Installing Oracle Database ToolsThe following are frequently asked questions about installing Oracle database tools:

■ How do I install Oracle Application Server?

■ How can I administer and monitor my Oracle Database products?

■ How do I manage security for my Oracle Database products?

■ How do I use Oracle Database to manage my XML data?

See Also: Oracle Database Administrator's Guide if you want to use software cloning to upgrade Oracle Database



■ Does Oracle Database provide OLAP tools so that I can analyze data such as trends and time series in my database?

■ Does Oracle Database provide data mining tools that I can use to discover hidden meaning in my data and predict likely outcomes based on my data?

■ How do I perform backup and recovery operations for Oracle Database?

■ Is Oracle Workflow included with Oracle Database 11g?

■ Is there a migration plan for customers that have built solutions using Oracle Workflow?

How do I install Oracle Application Server?Refer to Oracle Application Server Installation Guide. How you install Application Server depends on whether you already have Oracle Database installed:

■ If you do not have Oracle Database installed or you do not want Oracle Application Server to use any of your existing Oracle Databases, then Oracle Universal Installer lets you install a separate Oracle Application Server instance. This database is populated with the metadata that Oracle Application Server must run.

■ If you want Oracle Application Server to use an existing Oracle Database, then do the following:

1. From the Oracle Application Server installation media, run Oracle Application Server Repository Creation Assistant to populate your database with the metadata that Application Server needs.

2. Install the remaining Oracle Application Server components by following the instructions in the Oracle Application Server Installation Guide.

How can I administer and monitor my Oracle Database products?To perform regular administrative functions such as creating, configuring, or deleting databases, or managing database templates, use one of the following methods:

To manage only the single database and listener that you are installing:

1. Use platform-specific Oracle Database Installation Guide to install Oracle Database.

2. From Oracle Database, use Database Configuration Assistant to manage your databases.

You can also administer and monitor the database with Oracle Enterprise Manager Grid Control, which is installed by default with Oracle Database. Oracle Enterprise Manager Grid Control includes the Oracle Management Agent, Oracle Management Service, and Oracle Management Repository, and Grid Control, a browser-based central console through which administrators can perform all monitoring, administration, and configuration tasks for the enterprise.

To perform advanced administration tasks, such as monitoring Oracle Database and managing multiple hosts, application servers, and databases including the one that you are installing, install Oracle Enterprise Manager as follows:

1. Use platform-specific Oracle Database Installation Guide to install Oracle Database.

See Also: Oracle Enterprise Manager Grid Control Installation and Basic Configuration available on the Enterprise Manager Grid Control installation media



If you plan to use Oracle Real Application Clusters, then install Oracle Database by using platform-specific Oracle Clusterware Installation Guide and Oracle Real Application Clusters Installation Guide for HP-UX.

2. Use Oracle Enterprise Manager Grid Control Installation and Basic Configuration to install and configure Oracle Enterprise Manager. For postconfiguration tasks, use Oracle Enterprise Manager Advanced Configuration.

How do I manage security for my Oracle Database products?Oracle provides a wide range of security solutions for your enterprise environment, including centralized administration and security features integrated with Oracle Internet Directory. The set of Oracle security services called Oracle Platform Security integrates the security features built into Oracle Database, Oracle Application Server, and the Oracle Identity Management infrastructure. Combined, these features enable the development and deployment of secure e-business applications.

Oracle Identity Management includes Oracle Internet Directory, a centralized repository that simplifies administration of users and applications in the Oracle environment by the following components:

■ Oracle Internet Directory client tools, including LDAP command-line tools, the Oracle Internet Directory SDK, and Oracle Directory Manager.

■ Oracle Internet Directory server components, including the directory server, the directory replication server, the directory integration server, and various tools for starting and stopping them.

Oracle Database includes the Oracle Internet Directory client tools, but not the Oracle Internet Directory server components. To install the Oracle Internet Directory server components, run Oracle Universal Installer from an Oracle 10g Application Server installation.

How do I use Oracle Database to manage my XML data?Use Oracle XML DB, which is installed as part of Oracle Database. Oracle XML DB enables you to efficiently store, generate, retrieve, query, and manage XML data on your site. Oracle XML DB provides all the advantages of a relational database, for example, allowing you to control the referential integrity of XML data with constraints and triggers. It works well with large amounts of XML data by storing it in a parsed, relational form, which improves access performance.

Oracle XML DB supports XML Type, which is a native data type for XML data, for which you can choose various storage options depending on your needs. In addition,

See Also:

■ Oracle Application Server Installation Guide (to install Oracle Identity Management)

■ Oracle Database Security Guide

■ Oracle Database Advanced Security Administrator's Guide

■ Oracle Database Enterprise User Security Administrator's Guide

■ Oracle Label Security Administrator's Guide

■ Oracle Application Server Security Guide

■ Oracle Technology Network topics on database security (http://www.oracle.com/technology/deploy/security/index.html)



Oracle XML DB supports XML Schema processing, structured and unstructured storage, a content repository that you can access by using common protocols (FTP, HTTP(S), and WebDAV), and SQL/XML, which is a standard for SQL with XML. For Oracle Database 11g Release 1 (11.1), Oracle XML DB introduced support for the XQuery language for querying, transforming, and constructing XML; the ability for users to define their own metadata for schema-based XML; a set of new SQL functions for DML operations on XML data; and more.

You can use Oracle XML DB in conjunction with Oracle XML Developer’s Kit (XDK) to build applications that run on either Oracle Database or Oracle Application Server.

Does Oracle Database provide OLAP tools so that I can analyze data such as trends and time series in my database?Yes, install Oracle OLAP, which is provided in the Oracle Database installation. Oracle OLAP provides optimal support for database environments that must meet OLAP requirements.

Use either of the following methods in Oracle Database Installation Guide to install Oracle OLAP:

■ When you run Oracle Universal Installer, select the Custom installation type, and in the Available Product Components screen, select Oracle OLAP.

■ Select the Enterprise Edition installation type, and then on the Select Database Configuration screen, select the Data Warehouse configuration.

Does Oracle Database provide data mining tools that I can use to discover hidden meaning in my data and predict likely outcomes based on my data?Yes. Install Oracle Data Mining, which is provided in the Oracle Database installation. With the Oracle Data Mining option, you can create and execute predictive and descriptive data mining models that use a variety of algorithms.

Use the following method in platform-specific Oracle Database Installation Guide to install Oracle Data Mining:

1. When you run Oracle Universal Installer, select the Enterprise Edition installation type.

2. In the Select Database Configuration screen, select the General Purpose/Transaction Processing configuration.

See Also:

■ Oracle XML DB Developer's Guide

■ Oracle XML Developer's Kit Programmer's Guide

See Also:

■ Oracle OLAP User's Guide

■ Oracle OLAP DML Reference

■ Oracle OLAP Java API Reference

See Also: Oracle Database Data Warehousing Guide after installation

Installing Oracle Database with Oracle Applications


How do I perform backup and recovery operations for Oracle Database?Use Oracle Database Recovery Manager (RMAN), which is a backup and recovery tool integrated into Oracle Database. This tool satisfies the pressing demands of high-performance, manageable backup, and recovery. Recovery Manager is native to the database server, automatically tracks database structure changes, and optimizes operations accordingly. In addition, Recovery Manager is integrated with leading tape media management products, so that Oracle database backups can be integrated with your existing networked data protection infrastructure.

Is Oracle Workflow included with Oracle Database 11g?Starting with Oracle Database 11g, Oracle Workflow is no longer released with the database. Oracle Workflow will be available with the Oracle E-Business Suite releases.

Is there a migration plan for customers that have built solutions using Oracle Workflow? Starting January 2006, customers are encouraged to re-create and implement workflows using Oracle BPEL Process Manager. Oracle is in the process of creating a technical migration guide that will provide detailed recommendations for migrating Oracle Workflow processes to Oracle BPEL Process Manager.

Installing Oracle Database with Oracle ApplicationsThe following are frequently asked questions about installing Oracle database with Oracle applications:

■ How do I install my Oracle applications with Oracle Database?

■ How can I create Web applications that communicate with Oracle Database?

■ Which Web server can my Oracle applications use?

■ How can I migrate my non-Oracle applications to Oracle?

See Also: The following manuals after you have installed Oracle Data Mining:

■ Oracle Data Mining Concepts

■ Oracle Data Mining Administrator's Guide

■ Oracle Data Mining Application Developer's Guide

■ Oracle Data Mining Java API Reference

■ Oracle Database PL/SQL Packages and Types Reference (search for Data Mining)

See Also:

■ Oracle Database Backup and Recovery User's Guide

■ Oracle Database Backup and Recovery Reference

See Also: Oracle Workflow statement of direction (http://www.oracle.com/technology/products/ias/workflow/workflow_sod.html)

See Also: Oracle Workflow statement of direction (http://www.oracle.com/technology/products/ias/workflow/workflow_sod.html)

Installing Oracle Database Heterogeneous Connectivity Tools (Gateways)


How do I install my Oracle applications with Oracle Database?In most cases, install Oracle Database itself, then install the Oracle application. The Oracle Universal Installer for that application prompts you for the connection information. Check the application documentation requirements.

If you must implement your applications with Oracle Real Applications Clusters databases, refer to Oracle Real Application Clusters Installation Guide for HP-UX and platform-specific Oracle Clusterware Installation Guide.

How can I create Web applications that communicate with Oracle Database?Install Oracle Application Express and a web server:

Use platform-specific Oracle Database Installation Guide to install Oracle Database. Oracle Application Express is automatically installed, when you install Oracle database.

Which Web server can my Oracle applications use?Install Oracle HTTP Server, which ships on the Oracle Fusion Middleware Web Tier Utilities 11g (11.1.1.2.0) media in your media pack, or use the XML DB HTTP Protocol Server and the embedded PL/SQL Gateway that installs with Oracle Database 11g Release 1.

Use Oracle Database Installation Guide to install Oracle Database.

How can I migrate my non-Oracle applications to Oracle? Use Oracle Migration Workbench to migrate your non-Oracle applications to Oracle. Oracle Migration Workbench software and documentation are available at:

http://www.oracle.com/technology/tech/migration/index.html

Installing Oracle Database Heterogeneous Connectivity Tools (Gateways)The following section discusses about Gateway products:

How can my Oracle applications access data in a non-Oracle database system?

How can my Oracle applications access data in a non-Oracle database system?You can use Oracle Database Gateway as the connectivity tool to enable Oracle applications to access data in non-Oracle databases. The following are the functions of Oracle Database Gateway:

■ Integrates a non-Oracle database into your Oracle Database environment.

■ Enables Oracle PL/SQL applications to integrate with APPC-enabled transactions, or access messages in IBM Websphere MQ.

You can install the Gateway product on a computer independent of the Oracle application, Oracle database, and non-Oracle database.

For example, suppose you have the following scenario:

■ Oracle Database is installed on an UNIX computer.

■ The Oracle application is installed on a Microsoft Windows computer and accesses data from the Oracle database on the UNIX computer.

■ The Oracle application must join data in a DB2 database on Solaris Operating System and an Oracle Database on UNIX.



You have the option of installing the Database Gateway for DRDA on the Solaris computer where DB2 is running, on UNIX where Oracle is running, or on a third computer.

Table D–1 lists the non-Oracle database systems that you can access from Oracle applications, and the Gateways products that are available for those systems.

Table D–1 Oracle Gateway Products

Non-Oracle Database Oracle Gateway Products and Documentation

IBM DB2 Universal Database (UDB)

Oracle Database Gateway for DRDA.

Use Oracle Database Gateway Installation and Configuration Guide for AIX 5L Based Systems (64-Bit), HP-UX PA-RISC (64-Bit), HP-UX Itanium, Solaris Operating System (SPARC 64-Bit), Linux x86, and Linux x86-64 and Oracle Database Gateway for DRDA User's Guide.

IBM DB2 z/OS Oracle Database Gateway for DRDA.


IBM DB2/400 Oracle Database Gateway for DRDA.


WebSphere MQ Oracle Database Gateway for WebSphere MQ.

Oracle Database Gateway for WebSphere MQ Installation and User's Guide.

CICS/TS

IMSTM

Oracle Database Gateway for APPC.

Use Oracle Database Gateway for APPC Installation and Configuration Guide for AIX 5L Based Systems (64-Bit), HP-UX PA-RISC (64-Bit), Solaris Operating System (SPARC 64-Bit), and Linux x86.

SQL Server Oracle Database Gateway for SQL Server.

Use Oracle Database Gateway Installation and Configuration Guide for AIX 5L Based Systems (64-Bit), HP-UX PA-RISC (64-Bit), HP-UX Itanium, Solaris Operating System (SPARC 64-Bit), Linux x86, and Linux x86-64 and Oracle Database Gateway for SQL Server User's Guide.

Sybase Adaptive Server Oracle Database Gateway for Sybase.

Use Oracle Database Gateway Installation and Configuration Guide for AIX 5L Based Systems (64-Bit), HP-UX PA-RISC (64-Bit), HP-UX Itanium, Solaris Operating System (SPARC 64-Bit), Linux x86, and Linux x86-64 and Oracle Database Gateway for Sybase User's Guide.

Teradata Oracle Database Gateway for Teradata.

Use Oracle Database Gateway Installation and Configuration Guide for AIX 5L Based Systems (64-Bit), HP-UX PA-RISC (64-Bit), HP-UX Itanium, Solaris Operating System (SPARC 64-Bit), Linux x86, and Linux x86-64 and Oracle Database Gateway for Teradata User's Guide.

Informix Server Oracle Database Gateway for Informix.

Use Oracle Database Gateway Installation and Configuration Guide for AIX 5L Based Systems (64-Bit), HP-UX PA-RISC (64-Bit), HP-UX Itanium, Solaris Operating System (SPARC 64-Bit), Linux x86, and Linux x86-64 and Oracle Database Gateway for Informix User's Guide.



IMS Oracle Database Gateway for IMS.

Use Oracle Database Gateway for IMS, VSAM, and Adabas Installation and Configuration Guide for AIX 5L Based Systems (64-Bit), HP-UX PA-RISC (64-Bit), Solaris Operating System (SPARC 64-Bit), Linux x86, and Linux x86-64, Oracle Database Gateway for IMS User's Guide and Oracle Connect for IMS, VSAM, and Adabas Gateways Installation and Configuration Guide for IBM z/OS

VSAM Oracle Database Gateway for VSAM.

Use Oracle Database Gateway for IMS, VSAM, and Adabas Installation and Configuration Guide for AIX 5L Based Systems (64-Bit), HP-UX PA-RISC (64-Bit), Solaris Operating System (SPARC 64-Bit), Linux x86, and Linux x86-64, Oracle Database Gateway for VSAM User's Guide and Oracle Connect for IMS, VSAM, and Adabas Gateways Installation and Configuration Guide for IBM z/OS.

Adabas Oracle Database Gateway for Adabas.

Use Oracle Database Gateway for IMS, VSAM, and Adabas Installation and Configuration Guide for AIX 5L Based Systems (64-Bit), HP-UX PA-RISC (64-Bit), Solaris Operating System (SPARC 64-Bit), Linux x86, and Linux x86-64, Oracle Database Gateway for Adabas User's Guide and Oracle Connect for IMS, VSAM, and Adabas Gateways Installation and Configuration Guide for IBM z/OS.

Table D–1 (Cont.) Oracle Gateway Products

Non-Oracle Database Oracle Gateway Products and Documentation

Index-1

Index

Symbols/, C-3

AAcucorp ACUCOBOL-GT

requirement on Linux, 2-7Administrator

disk space requirements, 2-4Administrator installation type, 1-4administrator.rsp file, A-3APPC-enabled databases, D-9applications, empty connection strings, 4-5applications, migrating non-Oracle applications to

Oracle, D-8authorized problem analysis report

See APAR

Bbackups of database

Oracle Database Recovery Manager, D-7base directory

See Oracle base directoryBash shell

default user startup file, 2-14.bash_profile file, 2-14Basic installation type

noninteractive installations, A-4Bourne shell

default user startup file, 2-14bundle

checking, 2-4

CC compiler

requirement, 2-5See also Pro*C/C++

C shelldefault user startup file, 2-14

certification, hardware and software, 1-2Character Set Scanner, 1-5checking distribution of the operating system, 2-4checking version of the operating system, 2-4chmod command, 2-13

chown command, 2-13client static library, generating, 4-6Cluster Ready Services (CSS). See Oracle Clusterwareclusters

See also Oracle Clusterware, Oracle Real Application Clusters

configuration assistantsfailure, C-3troubleshooting, C-3

Customdisk space requirements, 2-4

Custom installation type, 1-4custom.rsp file, A-3

Ddata mining tools

Oracle Data Mining, D-6data warehousing tool

Oracle OLAP, D-6Database Configuration Assistant

troubleshooting, C-3databases

non-OracleAPPC-enabled, D-9

non-Oracle, listed, D-9OLAP support (Oracle OLAP), D-6recovery with Oracle Backup and Recovery, D-7security management, D-5

DB2 database, D-9DB2 z/OS database, D-9DB2/400 database, D-9default file mode creation mask

setting, 2-14directory

Oracle base directory, 2-10Oracle home directory, 2-12Oracle Inventory directory, 2-11oraInventory, 2-11

discmounting, 3-3

disk spacechecking, 2-3, 2-4

disk space requirementsAdministrator, 2-4Custom, 2-4

Index-2

Instant Client, 2-4Runtime, 2-4

DISPLAY environment variablesetting, 2-14

Eeasy connect naming method for Instant

Client-to-database connection, 4-4empty connect strings, 4-5env command, 2-17environment

checking settings, 2-17configuring for oracle user, 2-14

environment variablesDISPLAY, 2-14NLS_LANG, B-2ORACLE_BASE, 2-11, 2-14ORACLE_HOME, 2-14, 2-16PATH, 2-14removing from shell startup file, 2-15SHELL, 2-14TMP and TMPDIR, 2-3, 2-15TNS_ADMIN, 2-16, 4-5TWO_TAKS, 4-5

errorsconfiguration assistants, C-3installation, C-2, C-4noninteractive installation, C-4silent mode, C-4X Window, C-1X Window display errors, C-1

examplesOracle base directories, 2-11

Ffatal errors, C-4file mode creation mask

setting, 2-14file sets, 2-4file system

appropriate for Oracle base directory, 2-13files

administrator.rsp, A-3.bash_profile, 2-14custom.rsp, A-3editing shell startup file, 2-14instantclient.rsp, A-3.login, 2-14oraInst.loc, 2-9, 2-12oratab, 2-13.profile, 2-14response files, A-3runtime.rsp, A-3tnsnames.ora, 4-7

filesetschecking, 2-4

GGateways products FAQ, D-8globalization support, B-1Grid Control. See Oracle Enterprise Manager Grid

Controlgroups

checking for existing oinstall group, 2-9creating the oinstall group, 2-9

Hhardware certification, 1-2hardware requirements, 2-2home directory

See Oracle home directory

IIBM DB2 database, D-9IBM DB2 z/OS database, D-9IBM DB2/400 database, D-9IBM WebSphere MQ Series databases, D-9Informix Server database, D-9installation

accessing installation software, 3-1available products, 1-3cleaning up after a failed installation, C-4component-specific guidelines, 3-1considerations, 1-2errors, C-2, C-4

silent mode, C-4log files, C-2noninteractive

error handling, C-4overview, 1-1 to ??procedure, 3-6reinstalling Oracle software, 3-1response files, A-1, A-3

preparing, A-3, A-4silent mode, C-4templates, A-3

silent mode, A-5, A-6upgrading, D-3

installation errorssteps to resolve, C-2

installation overview, 1-1installation software

copying to a hard disk, 3-4extracting, 3-2

installation software, accessing, 3-1installation types

Administrator, 1-4Custom, 1-4Instant Client, 1-3Runtime, 1-4

Instant Clientconnecting to database with Oracle Call

Interface, 4-4connecting to Oracle Database, 4-4disk space requirements, 2-4

Index-3

easy connect naming method, 4-4empty connect strings, 4-5Instant Client Light

about, 1-3connecting to database, 4-4restrictions, 4-2updates, 4-2

patch upgrades, 4-2restrictions, 4-2TNS_ADMIN environment variable, connecting to

database, 4-5tnsnames.ora file connection method, 4-5TWO_TASK environment variable, connecting to

database, 4-5updates, 4-2

Instant Client installation type, 1-3Instant Client Light

about, 1-3connecting to database, 4-4restrictions, 4-2updates, 4-2

Instant Client Light, configuring, 4-3Instant Client, connecting with, 4-2instantclient.rsp file, A-3

JJDK requirements, 2-4

KKorn shell

default user startup file, 2-14

Llanguages

installing Oracle components in different languages, B-4

using Oracle components in different languages, B-3

log files, C-2troubleshooting, C-2

.login file, 2-14

Mmask

setting default file mode creation mask, 2-14memory requirements, 2-2Microsoft SQL Server database, D-9migrating

See upgradingmigrating applications to Oracle, D-8migrating non-Oracle databases to Oracle, D-3mkdir command, 2-13mode

setting default file mode creation mask, 2-14mount point

for Oracle base directory, 2-11mount point directories, 3-4

multiple Oracle homes, 1-2

NNet Configuration Assistant

troubleshooting, C-3NLS_LANG environment variable, B-2noninteractive installation

response filespreparing, A-3, A-4templates, A-3

silent mode, A-5, A-6errors, C-4

noninteractive modeabout, A-1reasons for using, A-2See also response files, silent mode, A-1

non-Oracle databases, listed, D-9

Ooinstall group

checking for existing, 2-9creating, 2-9description, 2-8

OLAP toolsabout, D-6Oracle OLAP, D-6

opatch utility, 4-2operating system

checking distribution and version, 2-4operating system groups

creating the oinstall group, 2-9oinstall, 2-8requirements, 2-8

operating system requirements, 2-4operating system users

creating the oracle user, 2-9oracle, 2-8requirements, 2-8

Optimal Flexible Architecturerecommendations for Oracle base directory, 2-10recommended path for Oracle base

directory, 2-10recommended path for Oracle home

directory, 2-12recommended path for Oracle Inventory

directory, 2-11Oracle Application Server, D-4Oracle applications

installing with Oracle Database, D-8Oracle base directory

and ORACLE_BASE environment variable, 2-11creating, 2-13creating new, 2-13description, 2-10equivalent directory on Microsoft Windows, 2-11examples, 2-11identifying appropriate file system, 2-13identifying existing, 2-12

Index-4

mount point for, 2-11recommended path, 2-10relationship with Oracle software owner

user, 2-11requirement for, 2-10

Oracle Call InterfaceInstant Client connection method, 4-4See also Instant Client

Oracle Clusterwareabout, D-3used with Oracle Real Application Clusters, D-3

Oracle componentsusing in different languages, B-3

Oracle Data Miningabout, D-6installing, D-6

Oracle Databaseadministering and monitoring, D-4connecting to Instant Client, 4-4installing with Oracle applications, D-8security management, D-5upgrading, D-3Web servers, D-8

Oracle Database Clientconfiguring connections, D-2installation procedure, 3-6

Oracle Database componentsadministering and monitoring, D-4connectivity FAQ, D-8FAQ on installing, D-1 to D-3installing with Oracle applications, D-8installing with Oracle Database tools, D-4

Oracle Database Recovery Manager (RMAN)about, D-7

Oracle home directorydescription, 2-12recommended path, 2-12requirement for, 2-12requirements, 2-12using to identify Oracle base directory, 2-13

Oracle home name, 2-12Oracle Internet Directory, D-5Oracle Inventory

description, 2-11pointer file, 2-9

Oracle Inventory directorydescription, 2-11recommended path, 2-11

Oracle Inventory groupchecking for existing, 2-9creating, 2-9description, 2-8

Oracle Migration Workbenchmigrating non-Oracle applications to Oracle, D-8migrating non-Oracle databases to Oracle, D-3

Oracle Netconfiguration file directory, 4-7

Oracle Net Configuration Assistantinstalling, 4-5

Oracle Net Services

post-installation tasks, 4-7Oracle OLAP

about, D-6Oracle Precompilers

postinstallation tasks, 4-7Oracle Procedural Gateway

listed products, D-9Oracle Real Application Clusters (RAC)

installing with Oracle Enterprise Manager, D-5Oracle Clusterware

about, D-3Oracle Schemas, xOracle software

removing, 5-1Oracle Software Owner user

creating, 2-9Oracle software owner user

configuring environment for, 2-14creating, 2-9description, 2-8determining default shell, 2-14relationship with Oracle base directory, 2-11

Oracle Technology Network (OTN)downloading documentation from, x

Oracle Transparent Gatewaylisted products, D-9

Oracle Universal Installerguidelines for using, 3-1installation guidelines, 3-1response files, A-1

list of, A-3running, 3-4running in different languages, B-4

oracle userconfiguring environment for, 2-14creating, 2-9, 2-10description, 2-8determining default shell, 2-14relationship with Oracle base directory, 2-11

Oracle XML DBabout, D-5

ORACLE_BASE environment variable, 2-11, 2-14removing from shell startup file, 2-15setting, 2-14

ORACLE_HOME environment variableremoving from shell startup file, 2-15unsetting, 2-16

ORACLE_SID environment variableremoving from shell startup file, 2-15

oraInst.loc file, 2-12location, 2-9location of, 2-9

oraInventory directorySee Oracle Inventory directory

oratab file, 2-13formats, 2-13location of, 2-13

OTN Web sitedownloading installation software from, 3-2

Index-5

Ppasswd command, 2-10passwords

specifying for response files, A-2See alsosecurity

patch download location, 2-7patches

download location, 2-7Instant Client/Instant Client Light

restrictions, 4-2opatch utility, 4-2

PATH environment variablesetting, 2-14

permissionsfor Oracle base directory, 2-13

post-installationrecommended tasks

user accounts, setting up, 4-6required tasks, 4-1

Oracle Net Services, configuring, 4-7patches, installing and downloading, 4-1

postinstallationrecommended tasks

client static library, generating, 4-6Instant Client Light, configuring, 4-3root.sh script, backing up, 4-4

required tasksInstant Client, connecting with, 4-2Oracle Precompilers, 4-7

postinstallation tasksInstant Client-to-database connection, 4-4

Precompilersrequirements, 2-5

Pro*C/C++configuring, 4-7requirements, 2-5See also C compiler

productchecking, 2-4

.profile file, 2-14program technical fix

See PTF

RRAM requirements, 2-2recovery of databases

Oracle Backup and Recovery, D-7reinstalling Oracle software, 3-1requirements

hardware, 2-2response files

about, A-1administrator.rsp, A-3creating with template, A-3custom.rsp, A-3general procedure, A-2instantclient.rsp, A-3passing values at command line, A-2passwords, A-2

runtime.rsp, A-3security, A-2specifying with Oracle Universal Installer, A-5See also silent mode, noninteractive mode, A-1

response files installationabout, A-1

root userlogging in as, 2-1

root.sh scriptbacking up, 4-4

Runtimedisk space requirements, 2-4

Runtime installation type, 1-4runtime.rsp file, A-3

Sschemas

Oracle Schemas, about, xsecurity

management tools, D-5See alsopasswords

shelldetermining default shell for oracle user, 2-14

SHELL environment variablechecking value of, 2-14

shell startup fileediting, 2-14removing environment variables, 2-15

silent modeabout, A-1reasons for using, A-2See also noninteractive mode, response files, A-1

silent mode installation, A-5, A-6software certification, 1-2software requirements, 2-4SQL Server database, D-9startup file

for shell, 2-14suppressed mode

reasons for using, A-2suppressed mode. See noninteractive modeswap space

checking, 2-3requirements, 2-2

swlist command, 2-4, 2-6Sybase Adapter Server database, D-9

Ttemporary disk space

requirements, 2-2Teradata database, D-9TMP environment variable, 2-3

setting, 2-15TMPDIR environment variable, 2-3

setting, 2-15TNS_ADMIN environment variable, 4-5

unsetting, 2-16tnsnames.ora file, 4-7

Index-6

Instant Client-to-database connection, 4-5troubleshooting, C-1

fatal errors, C-4TWO_TASK environment variable, 4-5

Uumask, 2-17umask command, 2-14, 2-17UNIX commands, 2-17

chmod, 2-13chown, 2-13env, 2-17mkdir, 2-13passwd, 2-10swlist, 2-4, 2-6umask, 2-14unset, 2-16unsetenv, 2-16useradd, 2-10xhost, 2-1xterm, 2-2

UNIX groupschecking for existing oinstall group, 2-9

UNIX userscreating the oracle user, 2-9

UNIX workstationinstalling from, 2-1

unset command, 2-16unsetenv command, 2-16updating Instant Client, 4-2upgrading, 1-4useradd command, 2-10users

creating the oracle user, 2-9Oracle software owner user, 2-8

WWeb servers (Oracle HTTP Server), D-8WebSphere MQ Series database, D-9Windows

analogy for Oracle base directory, 2-11

XX Window

display errors, C-1X Window system

enabling remote hosts, 2-1, 2-2xhost command, 2-1XML data, D-5xterm command, 2-2

Oracle Database Client Installation Guide 11g Release 1 ...

Documents

Transcript of Oracle Database Client Installation Guide 11g Release 1 ...