Interface Mating Dimensions - Spectrum Elektrotechnik GmbH
23
208 interfac.pm6 Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49) Complete interface dimensions of the connectors are shown in this chapter. The important measurements are marked clearly for every connector series: Dimensions, highlighted in an oval shape, are recommended for verifica- tion as a minimum. The connector gauges measuring these dimensions are included in the Expanded Calibration Kit and the Professional Kit as well. Dimensions, highlighted in a rectangular shape are recommended for verification in addition to the dimensions highlighted in an oval shape. Checking all these dimensions will guarantee optimum performance of the connectors. The necessary connector gauges to measure all those dimen- sions are included in the Professional Calibration Kit only. Testing the interfaces of connectors and adapters upon incoming inspection is not only highly recommended, it is definitely a necessity. Interfaces not meeting specification will lead to degraded specification of the components. In addition: These out of specification interfaces may damage the connectors of mating components or ruin the connectors of the test equipment. Spectrum Elektrotechnik GmbH manufactures a comprehensive line of connector gauges for measuring the critical interface dimensions of coaxial connectors. These connector gauges consist of an especially adapted dial indicator with appropriate bushings and pins that are designed to mate with the specific connector under test. The indicator is zero set by a calibration block (master).When engaged to a connector, it measures the specific interface dimension from a reference plane. For every dimension of interest, a special gauge is offered. This gives the most accurate results, allows easy calibration, fast testing and helps to avoid mistakes. A number of gauges are available. The main difference between the gauges is in the resolution, and the units of measurement, inches, or metric. Only the digital gauges can be switched from metric to inch and vice versa. Normally the Connector Gauges are supplied in an instrument case that protects them from getting damaged. In the box, there is also space for the appropriate torque wrench, which can be supplied on a separate order. Interface Mating Dimensions
-
Upload
khangminh22 -
Category
Documents
-
view
5 -
download
0
Transcript of Interface Mating Dimensions - Spectrum Elektrotechnik GmbH
208
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)
Complete interface dimensions of the connectors are shown in this chapter. The importantmeasurements are marked clearly for every connector series:
Dimensions, highlighted in an oval shape, are recommended for verifica-tion as a minimum. The connector gauges measuring these dimensions areincluded in the Expanded Calibration Kit and the Professional Kit as well.
Dimensions, highlighted in a rectangular shape are recommended forverification in addition to the dimensions highlighted in an oval shape.Checking all these dimensions will guarantee optimum performance of theconnectors. The necessary connector gauges to measure all those dimen-sions are included in the Professional Calibration Kit only.
Testing the interfaces of connectors and adapters upon incoming inspection is not only highlyrecommended, it is definitely a necessity. Interfaces not meeting specification will lead todegraded specification of the components. In addition: These out of specification interfacesmay damage the connectors of mating components or ruin the connectors of the test equipment.
Spectrum Elektrotechnik GmbH manufactures a comprehensive line of connector gauges formeasuring the critical interface dimensions of coaxial connectors. These connector gaugesconsist of an especially adapted dial indicator with appropriate bushings and pins that aredesigned to mate with the specific connector under test. The indicator is zero set by acalibration block (master).When engaged to a connector, it measures the specific interfacedimension from a reference plane.For every dimension of interest, a special gauge is offered. This gives the most accurateresults, allows easy calibration, fast testing and helps to avoid mistakes.
A number of gauges are available. The main difference between the gauges is in theresolution, and the units of measurement, inches, or metric. Only the digital gauges can beswitched from metric to inch and vice versa. Normally the Connector Gauges are supplied inan instrument case that protects them from getting damaged. In the box, there is also spacefor the appropriate torque wrench, which can be supplied on a separate order.
Interface Mating Dimensions
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49) 209
Interface Mating Dimensions 2.4mm
2.4mm Female
2.4mm Male
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)210
3.5mm Interface Mating Dimensions
3.5mm Female
3.5mm Male
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49) 211
209
Interface Mating Dimensions (Per IEC- 457-2) 7mm
212
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)
7/16 Interface Mating Dimensions (Per DIN 47223)
7 / 16 Female7 / 16 Female
7 / 16 Male
213
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)
Interface Mating Dimensions BMA
BMA Female
BMA Male
Frequency: DC - 22.0 GHz min.
Frequency: DC - 22.0 GHz min.
.128” min.3.25 min.
.127” max.3.23 max.
Dimensions showns are inches over millimeters.
Dimensions showns are inches over millimeters.
214
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)
BNC Interface Mating Dimensions (Per MIL-STD-348)
BNC Male
BNC Female
215
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)
Interface Mating Dimensions (Per MIL-STD-348) C
C Female
C Male
216
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)
HN Female
HN Interface Mating Dimensions (Per MIL-STD-348)
HN Male
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49) 217
2.92 mm Female
2.92 mm Male
Interface Mating Dimensions 2.92mm
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)218
N Interface Mating Dimensions (Per MIL-C-39012)
N Female
N Male
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49) 219
N 75 OhmsFemale
N 75 OhmsMale
Interface Mating Dimensions N 75 Ohms
220
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)
SBX Interface Mating Dimensions
SBX Female
SBX Male
Frequency: DC - 8.0 GHz min.
Frequency: DC - 8.0 GHz min.
.244” ± .0026.2 ± 0.05
.362” ± .0049.2 ± 0.1
Dimensions shown areinches over millimeters.
Dimensions shown are inches over millimeters.
.248” + .0066.3 + 0.15
.228” ± .003”5.8 ± 0.07
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49) 221
SBY Female
SBY Male
Interface Mating Dimensions SBY
222
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)
SC Interface Mating Dimensions (Per MIL-C-39012)
SC Female
SC Male
Frequency: DC - 10.0 GHz minDimension shown are inches over millimeters
Frequency: DC - 10.0 GHz minDimension shown are inches over millimeters
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49) 223
SMA Female
SMA Male
Interface Mating Dimensions (Per Mil-C-39012) SMA
224
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)
SSMA Female
SSMA Male
SSMA Interface Mating Dimensions
.01”(.25mm) max.
.00” (.00mm) min.
.01”(.25mm) max.
.00” (.00mm) min.
.005” ± .005”0.127 ± 0.127
.005” ± .005”0.127 ± 0.127
Dimensions shown are inches over millimeters.
Dimensions shown are inches over millimeters. Frequency: DC - 35.0 GHz min.
Frequency: DC - 35.0 GHz min.
225
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)
Interface Mating Dimensions (Per DESC 94007 and DESC 94008) SMP
SMP Female
SMP Male limited detent
SMP Male
SMP Male full detent
SMP Male smooth bore
.000” ± .005
0.000 ± 0.127
.000” ± .005
0.000 ± 0.127
.0525” ± .0175
1.33 ± 0.445.0525” ± .0175
1.33 ± 0.445
.0525” ± .0175
1.33 ± 0.445.0525” ± .0175
1.33 ± 0.445
Dimensions shown are inches over millimeters. Frequency: DC - 40.0 GHz min.
226
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)
SMP Test Connector Specification
SMP FemaleInterface
SMP MaleInterface Precision
.0016”/(0.04mm)max..0000”/(0.00mm)min.
.0016”/(0.04mm)max..0000”/(0.00mm)min.
.0016”/(0.04mm)max. 1)
.0000”/(0.00mm)min.
.0016”/(0.04mm)max. 1)
.0000”/(0.00mm)min.
Special Dimensions forSMP Male Commercial1) .0071”/(0.180mm)max.
.0051”/(0.130mm)min.
Dimensions shown are inches over millimeters.
Dimensions shown areinches over millimeters. Frequency: DC - 40.0 GHz min.
Frequency: DC - 40.0 GHz min.
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49) 227
SPM Female
SPM Male
Interface Mating Dimensions SPM
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)228
TNC Interface Mating Dimensions (Per MIL-C-39012)
TNC Female
TNC Male
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49) 229
TNC Female
TNC Male
Interface Mating Dimensions (Per Mil-C-87104/2) TNC
inte
rfac
.pm
6
Spectrum Elektrotechnik GmbH P.O. Box 45 05 33, 80905 Munich, Germany Tel. (89) 354 804-0, Fax (89) 354 804-90 (Country Code: 49)230
TNX Interface Mating Dimensions
TNX Female
TNX Male
