INDUSTRIAL . COMMERCIAL . OUTDOOR - Nikkon Lighting
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of INDUSTRIAL . COMMERCIAL . OUTDOOR - Nikkon Lighting
A fl agship brand from Success Electronics & Transformer Manufacturer (Success) lighting division specializing in design, integrate and manufacture professional industrial and commercial lighting for both indoor and outdoor applications.
LIGHTING
Success is established since 1980 and we have been the foremost provider of lighting technologies in Malaysia, enabling new and more effi cient uses of light in industrial areas that can transform our world both visually and practically.
Building on this expertise, NIKKON lighting has pioneered many innovations in industrial lighting and ballast/lamp systems that designed to save both energy and maintenance cost over the life of operation.
PRODUCTS
NIKKON family of products delivers complete lighting solutions—from components, to lamps, luminaries, and integrated systems—bringing you the utmost in quality.
We strive towards the ideal of meeting the needs for now and future. Our luminaries are ready to withstand extreme weather and dusty environment from general indoor lighting applications to outdoor industrial lighting applications, where variety of lighting requirements exist.
COMPANY
Success has been ISO 9001 certifi ed since 1998. It is this philosophy that pushes us to continuously improve our products; to upgrade and innovate.
Our ability to meet the customer’s requirements is constantly being evaluated and improved to deliver more effi ciency, eff ectiveness and fl exibility to assure their benefi t.
Considerable investments have been made to upgrade equipment, quality certifi cation and laboratory testing facilities, in particular for our low voltage transformer and lighting sectors.
FACILITIES
Success is pleased to be the fi rst in Malaysia to own the precision Spectroradiometer - a devices designed to measure the spectral power distribution of a light source.
From the spectral power distribution, the radiometric, photometric, and colorimetric, quantities of light can be determined in order to measure, characterize, and calibrate light sources for various lighting applications.
Our testing facilities including tester for vibration durability, UV radiation exposure, heat fatigue, temperature/humidity cyclic, LED luminaire lumen depreciation, dust ingress protection, salt fog corrosion and water ingress protection to ensure the reliability and consistency of our luminaire and maximize your expected yield through services provided by our Lighting Engineer and Designer.
SERVICES
Our Complete Solutions Workfl ow begin from conception all the way to fi nal installation on site. We have amassed the necessary software, hardware & expertise.
We can manufacture, as an OEM (Original Equipment Manufacturer), complete systems strictly in accordance with customer specifi cations, under the customer’s brand.
We can generate original designs through specialized 3D systems such as DIALUX to visualize your ideas & manufacture from the ground up applying our ODM (Original Design Manufacturer) capabilities to match - as close to perfection as possible - your compliance, performance & output, sustainability & consumption specifi cations.
ORIGIN
With the support from our parent company, Success Transformer Corporation Berhad (STC), the fi rst transformer and lighting manufacturing public listed company in Malaysia, NIKKON Industrial products are proudly manufactured in Malaysia to contribute our “Made in Malaysia” approach in top quality manufacturing.
Pg ii-v_NIKKON 2016-industrial.indd iiPg ii-v_NIKKON 2016-industrial.indd ii 4/25/17 11:45 AM4/25/17 11:45 AM
ROADWAY LIGHTING APPLICATIONS:
FLOODLIGHTING APPLICATIONS:
HIGHBAY /LOWBAY LIGHTING APPLICATIONS:
COMMERCIAL LIGHTING APPLICATIONS:
ARCHITECTURAL LIGHTING APPLICATIONS:
Pg ii-v_NIKKON 2016-industrial.indd iiiPg ii-v_NIKKON 2016-industrial.indd iii 4/25/17 11:45 AM4/25/17 11:45 AM
INDUSTRIAL LIGHTING
FLOODLIGHT SERIES 2
S1500 4S1501 5S2000 6 S2019 7S2030 8S3000 9S1598 10S2098 11S3319 12 S4030 13 S7019 14S8019 15
HIGHBAY & LOWBAY SERIES 16
S6128 SERIES HIGHBAY 17 AL SERIES HIGHBAY 18 AL 01000 SERIES HIGHBAY 20 SATURN SERIES HIGHBAY 21 DS SERIES HIGHBAY 22NL SERIES LOWBAY 24SMS IP RATED LOWBAY 25
STREET LIGHTING SERIES 26
S419 27S412 28S438-N 29S159 30
ARCHITECTURAL LIGHTING SERIES 32
SURIA WALL LIGHT S1070 33T8 IP65 WEATHER PROOF FITTING 34T5 IP65 WEATHER PROOF FITTING 35T8 IP66 SS FLUORESCENT FITTING 36
LIGHTING ACCESSORIES SERIES 38
HID LAMP BALLAST 39IGNITOR (NYLON CASING) 40SUPERIMPOSED IGNITOR 41(ALUMINIUM CASING)IP43 REMOTE CONTROL GEAR 42 IP65 REMOTE CONTROL GEAR 43INDOOR REMOTE CONTROL GEAR 44EMERGENCY LIGHTING MODULE 45(POWER PACK)
Pg ii-v_NIKKON 2016-industrial_ok.indd ivPg ii-v_NIKKON 2016-industrial_ok.indd iv 5/3/17 12:00 PM5/3/17 12:00 PM
OUTDOOR ARCHITECTURE LIGHTING
GALILEO 66
GALILEO L130701 67GALILEO L130702 68GALILEO L130703 69GALILEO L130704 70
BRENTANO & ANGLO 72
BRENTANO B140804 73BRENTANO B140805 74ANGLO P110402 & P110403 75
HORECA, CAVALRY & FAGON 76
HORECA W100101 77 CAVALRY W100302 78CAVALRY W100301 79 FAGON W100501 80FAGON W100502 81FAGON W100503 82
TECHNICAL DATA 84
ACCREDITATIONS & CERTIFICATIONS 90
INDOOR COMMERCIAL LIGHTING
DIE-CAST RECESSED LUMINAIRE 46
ET SERIES - CFL 47 ME SERIES - HID 48SO SERIES - HID 49PA SERIES - CFL 50TE SERIES - CFL 52 MA SPOT HEAD SERIES 54
PENDANT & CEILING MOUNTED LUMINAIRE
CO SERIES 57IR SERIES 58TA SERIES 59IS SERIES 60
TRACK LIGHT & ACCESSORIES 62
XE SERIES 63MO SERIES 64
ALL REASONABLE CARE HAS BEEN TAKEN BY SUCCESS TO ENSURE THATTHE INFORMATION PROVIDED IN THIS CATALOGUE IS CORRECT AT TIMEOF PUBLICATION. THE INFORMATION PROVIDED MAY CONTAIN TECHNICALINACCURACIES OR TYPOGRAPHICAL ERRORS AND MAY NOT NECESSARILYBE COMPREHENSIVE, COMPLETE, ACCURATE OR UP TO DATE.
SUCCESS IS CONSTANTLY DEVELOPING AND IMPROVING ITS PRODUCTS AND WE MAY CHANGE SPECIFICATIONS FROM TIME TO TIME IN THE INTEREST OF PRODUCT DEVELOPMENT, WITHOUT PRIOR NOTIFICATION OR PUBLICANNOUNCEMENT.
SUCCESS SHALL HAVE NOT BE LIABLE IN WHATSOEVER MANNER FOR ANYLOSS AND/OR INJURY CAUSED, IN WHOLE OR IN PART, BY ITS ACTIONS,OMISSIONS OR NEGLIGENCE, OR FOR ANY CONTINGENCIES BEYOND ITSCONTROL IN PROCURING, COMPILING OR DELIVERING ANY INFORMATION.
ANY AND ALL INFORMATION IN THIS CATALOGUE IS SUPPLIED UPON THECONDITION THAT THE PERSON RECEIVING IT WILL MAKE THEIR OWNDETERMINATION AS TO ITS ACCURACY AND ITS SUITABILITY FOR THEIRPURPOSES PRIOR TO ITS USE. YOU AS USER AGREE TO THISDISCLAIMER AND USER AGREEMENT WITH THE USE OF THE PROVIDEDMATERIALS, INFORMATION AND DATA.
Please contact our authorized sales representative, distributors or visit our website to obtain the latest details of the products and company information.
Pg ii-v_NIKKON 2016-industrial.indd vPg ii-v_NIKKON 2016-industrial.indd v 4/25/17 2:02 PM4/25/17 2:02 PM
2
Pg02-45_NIKKON 2016-industrial.indd 2Pg02-45_NIKKON 2016-industrial.indd 2 4/25/17 2:07 PM4/25/17 2:07 PM
3
INDUSTRIALLIGHTING
FLOODLIGHT
Pg02-45_NIKKON 2016-industrial.indd 3Pg02-45_NIKKON 2016-industrial.indd 3 4/25/17 2:25 PM4/25/17 2:25 PM
4
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
order code
model lamp type lamp holder carton dimension (L x W x H) mm order codeS1500 SY MH 70W tubular / bulb / double ended E27 / RX7s 300 x 270 x 215 S1500-M0070S1500 SY MH 150W tubular / bulb / double ended E27 / RX7s 300 x 270 x 215 S1500-M0150S1500 SY HPS 70W tubular / bulb E27 300 x 270 x 215 S1500-S0070S1500 SY HPS 150W tubular / bulb E40 300 x 270 x 215 S1500-S0150
dimension
photometric curve
S1500
features
electrical system• built-in control gear suitable for HID lamps from 70W - 150W housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon outdoor epoxy powder coating refl ector• high purity anodized hammered fi nish aluminium refl ector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder
technical data
ingress protection • IP65voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 150Wholder type • E27, E40 and RX7smaximum weight • 5.5 kgcolour of housing • black
key for standard order coding
S1500 - M 0150 capacity code : example = 150W
lamp type : S = high pressure sodium
: M = metal halide
casing model
200 292
80
364
242
ø14
ø11
200
400
300
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
note : photometric result tested based on 14000lm MH 150W coated bulb
C90
C180
C270
C0
Pg02-45_NIKKON 2016-industrial.indd 4Pg02-45_NIKKON 2016-industrial.indd 4 4/25/17 2:07 PM4/25/17 2:07 PM
5
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
features
electrical system• built-in control gear suitable for HID lamps from 70W - 150W
housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon
outdoor epoxy powder coatingrefl ector
• high purity anodized hammered fi nish aluminium refl ectorglass
• thermal resistant tempered glassmounting bracket
• steel mounting bracket coated with epoxy powder
technical data
ingress protection • IP65voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 150Wholder type • RX7smaximum weight • 5 kgcolour of housing • white & black
key for standard order coding
order code
model lamp type lamp holder carton dimension (L x W x H) mm order codeS1501 MH 70W double ended RX7s 441 x 265 x 100 S1501-M0070S1501 MH 150W double ended RX7s 441 x 265 x 100 S1501-M0150S1501 HPS 70W double ended RX7s 441 x 265 x 100 S1501-S0070S1501 HPS 150W double ended RX7s 441 x 265 x 100 S1501-S0150* casing available in black and white colour.
dimension
photometric curve
S1501
S1501 - S 0150 capacity code : example = 150W
lamp type : S = high pressure sodium
: M = metal halide
casing model
85230
430
ø10
110
300
200
400
600
500
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
note : photometric result tested based on11000lm MH 150W double ended tube
C90
C180
C270
C0
Pg02-45_NIKKON 2016-industrial.indd 5Pg02-45_NIKKON 2016-industrial.indd 5 4/25/17 2:25 PM4/25/17 2:25 PM
6
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
key for standard order coding
order code
model lamp type lamp holder carton dimension (L x W x H) mm order codeS2000 SY MH 250W (2.1A) tubular E40 475 x 430 x 165 S2000-M0250S2000 SY MH 400W tubular E40 475 x 430 x 165 S2000-M0400S2000 SY HPS 250W tubular E40 475 x 430 x 165 S2000-S0250S2000 SY HPS 400W tubular E40 475 x 430 x 165 S2000-S0400* S2000 asymmetrical type fl oodlight is available upon request.
dimension
photometric curve
technical data
ingress protection • IP65voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 250W - 400Wholder type • E40maximum weight • 9 kgcolour of housing • black
S2000 SY - M 0400 capacity code : example = 400W
lamp type : S = high pressure sodium
: M = metal halide
refl ector model : SY = symmetrical
: ASY = asymmetrical
casing model
features
electrical system• built-in control gear suitable for HID lamps from 250W - 400W housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon
outdoor epoxy powder coating refl ector• high purity anodized hammered fi nish aluminium refl ector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder
S2000
145 420
200
500
295
ø10
150
250
100
200
300
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
note : photometric result tested based on 32000lm MH 400W clear tube
C90
C180
C270
C0
Pg02-45_NIKKON 2016-industrial.indd 6Pg02-45_NIKKON 2016-industrial.indd 6 4/25/17 2:08 PM4/25/17 2:08 PM
7
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
order code
model lamp type lamp holder carton dimension (L x W x H) mm order codeS2019 SY MH 250W (2.1A) tubular E40 470 x 430 x 157 S2019-M0250S2019 SY MH 400W tubular E40 470 x 430 x 157 S2019-M0400S2019 SY HPS 250W tubular E40 470 x 430 x 157 S2019-S0250S2019 SY HPS 400W tubular E40 470 x 430 x 157 S2019-S0400* S2019 asymmetrical type fl oodlight is available upon request.
S2019 Sy - M 0400 capacity code : example = 400W
lamp type : S = high pressure sodium
: M = metal halide
refl ector model : Sy = symmetrical
: Asy = asymmetrical
casing model
key for standard order coding
dimension
photometric curve
S2019
technical data
ingress protection • IP65voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 250W - 400Wholder type • E40maximum weight • 9.5 kgcolour of housing • black
features
electrical system• built-in control gear suitable for HID lamps from 250W - 400W housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon outdoor epoxy powder coating refl ector• high purity anodized hammered fi nish aluminium refl ector glass• frameless thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder
145 420
200
500
295
ø10
150
250
100
200
300
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
note : photometric result tested based on 32000lm MH 400W clear tube
C90
C180
C270
C0
Pg02-45_NIKKON 2016-industrial.indd 7Pg02-45_NIKKON 2016-industrial.indd 7 4/25/17 2:25 PM4/25/17 2:25 PM
8
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
features
housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon outdoor epoxy powder coating refl ector• high purity anodized hammered aluminium refl ector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder colour of housing• black
technical data
ingress protection • IP65voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 250W - 400Wlamp holder • E40maximum weight • 10.0 kg
key for standard order coding
order code
model lamp type lamp holder carton dimension (L x W x H) mm order codeS2030 MH 250W (2.1A) tubular E40 410 x 340 x 300 S2030 - M0250S2030 MH 400W tubular E40 410 x 340 x 300 S2030 - M0400S2030 HPS 250W tubular E40 410 x 340 x 300 S2030 - S0250S2030 HPS 400W tubular E40 410 x 340 x 300 S2030 - S0400S2030 HPMV 250W bulb E40 410 x 340 x 300 S2030 - H0250S2030 HPMV 400W bulb E40 410 x 340 x 300 S2030 - H0400
dimension
photometric curve
S2030
S2030 - S 0250 capacity code lamp type
casing model
: example = 250W
: S = high pressure sodium: M = metal halide: H = mecury vapor
452
306
405 267
150
2 x Ø10.5
Ø13
150
250
100
200
300
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
note : photometric result tested based on 32000lm MH 400W clear tube
S2030 - Wide beam
C90
C180
C270
C0
Pg02-45_NIKKON 2016-industrial.indd 8Pg02-45_NIKKON 2016-industrial.indd 8 4/25/17 2:08 PM4/25/17 2:08 PM
9
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
order code
model lamp type lamp holder carton dimension (L x W x H) mm order codeS3000 MH 1000W tubular E40 600 x 510 x 230 S3000-M1000S3000 HPS 1000W tubular E40 600 x 510 x 230 S3000-S1000accessories housing material IP rated order coderemote control gear (MH 1000W) steel c/w epoxy powder IP43 S5100 UC-M1000remote control gear (HPS 1000W) steel c/w epoxy powder IP43 S5100 UC-S1000remote control gear (MH 1000W) die-cast aluminium IP65 S5100 UA-M1000remote control gear (HPS 1000W) die-cast aluminium IP65 S5100 UA-S1000
features
housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon outdoor epoxy powder coating refl ector• high purity anodized hammered fi nish aluminium refl ector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder lamp holder• E40 lamp holder conforming to EN / VDE standard
technical data
ingress protection • IP65 (lamp fi tting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 1000W & HPS 1000Wholder type • E40fl oodlight maximum weight • 11.6 kgcontrol gear maximum weight • S5100-M1000 : 14 kg / S5100-S1000 : 15.5 kgcolour of housing • black
S3000 - S 1000 capacity code lamp type
casing model
: example = 1000W
: S = high pressure sodium: M = metal halide
key for standard order coding
dimension
photometric curve
S3000
accessories
200 585
380
540 ø16 M8 x 20
180
360
200
400
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
C90
C180
C270
C0
Pg02-45_NIKKON 2016-industrial.indd 9Pg02-45_NIKKON 2016-industrial.indd 9 4/25/17 2:25 PM4/25/17 2:25 PM
10
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
features
housing• high pressure aluminium die-cast body coated with epoxy powder refl ector• high purity anodized hammered aluminium reflector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder colour of housing• MAT RAL 9006 (Akzo Nobel)
technical data
ingress protection • IP66voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 150Wlamp holder • E27 / RX7smaximum weight • 4.2 kg
key for standard order coding
photometric curve
dimension
S1598
order code
model lamp type lamp holder carton dimension (L x W x H) mm order codeS1598 N MH 70W Tubular / double ended E27 / RX7s 470 x 325 x 150 S1598 N – M0070S1598 N MH 150W Tubular / double ended E27 / RX7s 470 x 325 x 150 S1598 N – M0150S1598 N HPS 70W Tubular / double ended E27 / RX7s 470 x 325 x 150 S1598 N – S0070S1598 N HPS 150W Double ended RX7s 470 x 325 x 150 S1598 N – S0150S1598 SY MH 70W Tubular / double ended E27 / RX7s 470 x 325 x 150 S1598 SY – M0070S1598 SY MH 150W Tubular / double ended E27 / RX7s 470 x 325 x 150 S1598 SY – M0150S1598 SY HPS 70W Tubular / double ended E27 / RX7s 470 x 325 x 150 S1598 SY – S0070S1598 SY HPS 150W Double ended RX7s 470 x 325 x 150 S1598 SY – S0150S1598 ASY MH 70W Tubular / double ended E27 / RX7s 470 x 325 x 150 S1598 ASY – M0070S1598 ASY MH 150W Tubular / double ended E27 / RX7s 470 x 325 x 150 S1598 ASY – M0150S1598 ASY HPS 70W Tubular / double ended E27 / RX7s 470 x 325 x 150 S1598 ASY – S0070S1598 ASY HPS 150W Double ended RX7s 470 x 325 x 150 S1598 ASY – S0150• N - Narrow Beam • SY - symmetrical • ASY - asymmetrical refl ector
S1598 Asy - RX7s - M 0150
Pg02-45_NIKKON 2016-industrial.indd 10Pg02-45_NIKKON 2016-industrial.indd 10 4/25/17 2:08 PM4/25/17 2:08 PM
11
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
order code
model lamp type lamp holder carton dimension (L x W x H) mm order codeS2098 SY MH 250W Tubular E40 600 x 455 x 200 S2098 SY – M0250S2098 SY MH 400W Tubular E40 600 x 455 x 200 S2098 SY – M0400S2098 SY HPS 250W Tubular E40 600 x 455 x 200 S2098 SY – S0250S2098 SY HPS 400W Tubular E40 600 x 455 x 200 S2098 SY – S0400S2098 ASY MH 250W Tubular E40 600 x 455 x 200 S2098 ASY – M0250S2098 ASY MH 400W Tubular E40 600 x 455 x 200 S2098 ASY – M0400S2098 ASY HPS 250W Tubular E40 600 x 455 x 200 S2098 ASY – S0250S2098 ASY HPS 400W Tubular E40 600 x 455 x 200 S2098 ASY – S0400• ASY - asymmetrical refl ector • SY - symmetrical
features
housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon outdoor epoxy powder coating refl ector• high purity anodized polished hammered fi nish aluminium refl ector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder colour of housing• MAT RAL 9006 (Akzo Nobel)
technical data
ingress protection • IP66voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 250W - 400Wlamp holder • E40maximum weight • 12.5 kg
S2098 SY - M 0250 capacity code : example = 250W
lamp type : S = high pressure sodium
: M = metal halide
refl ector model : Sy = symmetrical
: Asy = asymmetrical
casing model
key for standard order coding
dimension
S2098
photometric curve
A
435
483
234
542469
60°
90180
3 x Ø12
58
300
200
400
500
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
Pg02-45_NIKKON 2016-industrial.indd 11Pg02-45_NIKKON 2016-industrial.indd 11 4/25/17 2:25 PM4/25/17 2:25 PM
12
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
photometric curve
features
body frame / colour• deep draw with high purity aluminium sheet• dark grey colour refl ector• high purity anodized aluminium deep draw refl ector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder
attached with angle adjuster and indicator lamp holder• E40 lamp holder conforming to EN / VDE standard
technical data
ingress protection • IP66 (lamp fi tting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 1000W & HPS 1000Wholder type • E40fl oodlight maximum weight • 11 kgcontrol gear maximum weight • S5100 UA-M : 14kg / S5100 UA-S : 15.5kg
key for standard order coding
S3319 - M 1000 capacity code lamp type
casing model
: example = 1000W
: S = high pressure sodium: M = metal halide
order code
model lamp type lamp holder carton dimension (L x W x H) mm order codeS3319 MH 1000W tubular E40 700 x 680 x 500 S3319-M1000S3319 HPS 1000W tubular E40 700 x 680 x 500 S3319-S1000accessories housing material IP rated order coderemote control gear (MH 1000W) die-cast aluminium IP65 S5100 UA-M1000remote control gear (HPS 1000W) die-cast aluminium IP65 S5100 UA-S1000
dimension
S3319
accessories
589
520
623
576
595
45º
188180
Ø20
1563
R70 R55
C0 C180
C90
C270
note : photometric result tested based on 85000lm MH 1000W - BH / 67 clear tube
300
200
500
400
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
Pg02-45_NIKKON 2016-industrial.indd 12Pg02-45_NIKKON 2016-industrial.indd 12 4/25/17 2:16 PM4/25/17 2:16 PM
13
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
features
housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon outdoor epoxy powder coating refl ector• high purity anodized hammered fi nish aluminium refl ector glass• frameless thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder rear cover• easy access to the lamp from rear without removing the front glass lamp holder• E40 lamp holder conforming to EN / VDE standard
technical data
ingress protection • IP65 (lamp fi tting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 2000Wholder type • E40fl oodlight maximum weight • 12 kgcontrol gear weight • 19.5 kgcolour of housing • black
order code
model lamp type lamp holder carton dimension (L x W x H) mm order codeS4030 MH 2000W tubular E40 620 x 540 x 310 S4030-M2000accessories housing material IP rated order coderemote control gear die-cast aluminium IP65 S5200 UA-M2000* S4030 ASY 1000W is available upon request.
dimension
S4030
accessories
290 510
540
490 495 ø16
300
S5200-UA
232 250
180
ø10
200
363
key for standard order coding
S4030 - M 2000 capacity code lamp type
casing model
: example = 2000W
: M = metal halide
photometric curveC90
C180
C270
C0
note : photometric result tested based on 180000lm MH 2000W E40 clear tube
200
300
400
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
Pg02-45_NIKKON 2016-industrial.indd 13Pg02-45_NIKKON 2016-industrial.indd 13 4/25/17 2:24 PM4/25/17 2:24 PM
14
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
order code
model lamp type lamp holder carton dimension (L x W x H) mm order codeS7019 MH 1000W tubular E40 640 x 650 x 520 S7019-M1000S7019 HPS 1000W tubular E40 640 x 650 x 520 S7019-S1000accessories housing material IP rated order coderemote control gear (MH 1000W) die-cast aluminium IP65 S5100 UA-M1000remote control gear (HPS 1000W) die-cast aluminium IP65 S5100 UA-S1000
features
body / lamp holder compartment• body lamp holder compartment is made from die-cast aluminium
and powder coated with Akzo Nobel Interpon for protection high performance refl ector• single piece high purity deep draw aluminium refl ector is sealed
with silicon gasket over heat resistant tempered glass provide a watertight seal
glass• fi xed thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder attached with angle adjuster & indicator rear cover• easy access to the lamp from the rear cover of the fi tting lamp holder• E40 lamp holder conforming to EN / VDE standard
technical data
ingress protection • IP66 (lamp fi tting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 1000W & HPS 1000Wholder type • E40fl oodlight maximum weight • 11 kgcontrol gear weight • S5100-UA-M : 14 kg / S5100-UA-S : 15.5 kg
dimension
S7019
S7019 - S 1000 capacity code lamp type
casing model
: example = 1000W
: S = high pressure sodium: M = metal halide
key for standard order coding
photometric curve
accessories458
330
45º
ø587
623
R64
18
ø17
155163
54
R46
1600
2400
3200
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
note : photometric result tested based on 85000lm MT 1000A - BH / 67 clear tube
C0 C180
C90
C270
Pg02-45_NIKKON 2016-industrial.indd 14Pg02-45_NIKKON 2016-industrial.indd 14 4/25/17 2:16 PM4/25/17 2:16 PM
15
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
technical data
ingress protection • IP66 (lamp fi tting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 2000Wholder type • E40fl oodlight maximum weight • 12 kgcontrol gear weight • 19.5 kg
S8019 - M 2000 capacity code lamp type
casing model
: example = 2000W
: S = high pressure sodium: M = metal halide
key for standard order coding
dimension
photometric curve
S8019
order code
model lamp type lamp holder carton dimension (L x W x H) mm order codeS8019 MH 2000W tubular E40 640 x 650 x 575 S8019-M2000accessories housing material IP rated order coderemote control gear (MH 2000W) die-cast aluminium IP65 S5200 UA-M2000
accessories
features
body / lamp holder compartment• body lamp holder compartment is made from die-cast aluminium
and powder coated with Akzo Nobel Interpon for protection high performance refl ector• single piece high purity deep draw aluminium refl ector is sealed
with silicon gasket over heat resistant tempered glass provide a watertight seal
glass• fi xed thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder attached with angle adjuster & indicator rear cover• easy access to the lamp from the rear cover of the fi tting lamp holder• E40 lamp holder conforming to EN / VDE standard
R64
18
ø17
155163
54
R46
S5200-UA
232 250
180
ø10
200
363
3200
4800
6400
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270: note : photometric result tested based on
180000lm MH 2000W clear tube
C0 C180
C90
C270
Pg02-45_NIKKON 2016-industrial.indd 15Pg02-45_NIKKON 2016-industrial.indd 15 4/25/17 2:24 PM4/25/17 2:24 PM
16
HIGHBAY & LOWBAY
Pg02-45_NIKKON 2016-industrial.indd 16Pg02-45_NIKKON 2016-industrial.indd 16 4/25/17 2:16 PM4/25/17 2:16 PM
17
S6128 - STM25 - M 0250 - RPC16 + DPC16attachment
refl ector model
capacity code : example = 250W
lamp type : S = high pressure sodium : M = metal halide : H = mercury vaporcasing model
key for standard order coding
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
order code
description weight (kg) carton dimension (L x W x H) mm order codehousing S6128 - ST 1 x MH 250W 5.1 540 x 290 x 280 S6128-STM25 S6128 - ST 1 x MH 400W 6.1 540 x 290 x 280 S6128-STM40 S6128 - ST 1 x HPS 250W 6.1 540 x 290 x 280 S6128-STS25 S6128 - ST 1 x HPS 400W 7.2 540 x 290 x 280 S6128-STS40 S6128 - ST 1 x HPMV 250W 5.1 540 x 290 x 280 S6128-STH25 S6128 - ST 1 x HPMV 400W 5.6 540 x 290 x 280 S6128-STH40refl ectors 16” PC prismatic refl ector 1.1 RPC16 22” PC prismatic refl ector 2.0 RPC22 15” AL multi facet wide beam refl ector 0.5 RAL15MFW 18” AL multi facet wide beam refl ector 0.8 RAL18MFWattachments 16” PC prismatic diff user 0.5 DPC16 22” PC prismatic diff user 1.2 DPC22 15” AL multi facet wide beam refl ector glass cover 1.7 VGAL15MFW 18” AL multi facet wide beam refl ector glass cover 2.4 VGAL18MFW* additional safety guard is available upon request • PC : Polycarbonate • AL : Aluminium
accessories
features gear box• high pressure aluminium die-cast housing with AKzo
Nobel Interpon outdoor epoxy powder coating refl ector
• high purity aluminium refl ector or polycarbonate refl ector diff user / visor / safety guard• optional PC diff user, tempered glass visor and guard
can be mounted onto the refl ector for safety purpose installation / mounting
• suitable for single point suspension on wire and chain
technical dataingress protection(IP) • IP23 matching with PC refractor • IP65 matching with AL refl ector & visorvoltage • 220 - 240 Vac 50 / 60 Hzlamp wattage • 250W - 400Wholder type • E27 & E40colour of housing • dark grey
dimension
photometric curve
key for standard order coding
copa - ST highbay housing
note : copa - MB highbay is available upon request ST : standard
168230204
160
320
240
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
S6128 series highbay
eaturesgear boxhigh pressure aluminium die-cast h
Pg02-45_NIKKON 2016-industrial.indd 17Pg02-45_NIKKON 2016-industrial.indd 17 4/25/17 2:24 PM4/25/17 2:24 PM
18
Refl ector & visor type:
AL 25400 - M 0250 - 8718+VGAL 8718
features control gear housing• high quality cold rolled steel with epoxy powder coating power factor correction capacitor• 100˚C aluminium casing self healing capacitor with overpressure break action mechanism refl ector• high purity anodized polished aluminium refl ector tempered glass / safety guard• optional glass visor and wire guard can be mounted onto the
refl ector for safety purposes others
• lamp holder and thermal resistant fi bre glass wire
AL series highbay
technical data
voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 400Wholder type • E27 & E40colour of housing • light grey
photometric curve
key for standard order coding
300
500
200
600
400
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
Pg02-45_NIKKON 2016-industrial.indd 18Pg02-45_NIKKON 2016-industrial.indd 18 4/25/17 2:16 PM4/25/17 2:16 PM
19
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
matching table
casing model refl ector type lamp type visor guard metal halide high pressure sodium mercury vapor 70W 150W 250W 400W 70W 150W 250W 400W 80W 125W 250W 400W N412G √ √ √ √ √ √ √ √ √ √ √ N712G √ √ √ √ √ √ √ √ 6407 √ √ √ √ √ √ √ √ √ x √ RAL8718 √ √ √ √ √ √ √ √ RAL15MFWR √ √ √ √ √ √ √ √ √ √ √ RAL18MFWR √ √ √ √ √ √ √ √ x : not matching √ : matching
dimension & attachment
refl ector visormodel dimension (mm) weight model dimension weight thickness carton dimension a b (kg) (mm) (kg) (mm) (L x W x H) mmN412G 315 ø390 0.4 N412G glass visor ø380 0.45 5 667 x 388 x 388N712G 405 ø465 0.7 N712G glass visor ø465 2.20 5 267 x 473 x 473 6407 245 ø400 0.4 - - - - 509 x 409 x 409 RAL8718 335 ø470 0.6 RAL8718 glass visor ø465 2.20 5 510 x 475 x 475RAL15MFWR 286 ø401 0.5 RAL15MFWR glass visor ø401 1.70 5 645 x 425 x 425 RAL18MFWR 335 ø476 0.8 RAL18MFWR glass visor ø476 2.40 5 530 x 500 x 500
AL70150 /AL25400
Pg02-45_NIKKON 2016-industrial.indd 19Pg02-45_NIKKON 2016-industrial.indd 19 4/25/17 2:23 PM4/25/17 2:23 PM
20
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
dimension
technical data
voltage • 220 - 240 Vac 50 Hz / 60Hzlamp wattage • 700W - 1000Wholder type • E40colour of housing • light grey
features
control gear housing• high quality cold rolled steel with epoxy powder coating refl ector• high purity anodized polished aluminium refl ector tempered glass• optional visor can be mounted onto the refl ector for safety purposes others• lamp holder and thermal resistant fi bre glass wire
order code
casing model lamp wattage lamp type weight (kg) carton dimension (L x W x H) mm order codeAL 01000 highbay MH 1000W bulb 14.0 560 x 200 x 200 AL 01000 - M1000AL 01000 highbay HPMV 1000W bulb 13.5 560 x 200 x 200 AL 01000 - H1000refl ector model weight (kg) order codeAL refl ector RAL22MFWR 1.5 RAL22MFWRattachment dimension (mm) thickness (mm) weight (kg) order codeTempered glass visor ø570 5 3.2 VGAL22MFW
AL 01000 series highbay
photometric curve
key for standard order coding
AL01000 - M 1000 - RAL22MFWR + VGAL22MFWattachment (visor model)
refl ector model
capacity code : example = 1000W
lamp type : S = high pressure sodium
: M = metal halide
: H = mercury vapor
casing model
steel with epoxy powder coating
428
ø579
ø71
ø89
ø6 ø12
27
180 180 180
460 460
180
RAL 22MFWR 22” AL reflecor
reflector mounting hole
AL 01000 casing
150
100
300
250
200
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
Pg02-45_NIKKON 2016-industrial.indd 20Pg02-45_NIKKON 2016-industrial.indd 20 4/25/17 2:17 PM4/25/17 2:17 PM
21
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
order code
model lamp type lamp holder carton dimension (L x W x H) mm order code
saturn 1 HID / CFL E27 670 x 895 x 670 saturn 1saturn 3 HID / CFL E27 saturn 3remote control gear lamp wattage lamp type order codeS5007-IC 70W MH / HPS S5007-ICS5008-IC 80W HPMV S5008-ICS5010-IC 100W HPS S5010-ICS5012-IC 125W HPMV S5012-ICS5015-IC 150W MH / HPS S5015-IC
features
control gear housing• high quality cold rolled steel with epoxy powder coating refl ector• polycarbonate refl ector for uniform light distribution
dimension
Saturn series highbay
technical data
voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 150Wholder type • E27 control gear • MH 70W - 150W • HPS 70 - 150W • HPMV 80 - 125Wcolour of housing • light grey (control gear)
photometric curve
key for standard order coding
Saturn 1 - M 0070 - S5007 - IC remote control gear
capacity code : example = 70W
lamp type : S = high pressure sodium
: M = metal halide
casing model
accessoriessaturn 1 with 12” PC Reflector saturn 3 with 16” PC Reflector
ø317 ø406
±770
194
66
±901
325
66
40
60
80
100
120
0º15º30º 30º45º 45º
60º
75º
90º
105º
120º
135º
60º
75º
90º
105º
120º
135º150º 165º 180º 165º 150º
15º
cd/klmC0/C180: C90/C270:
remote control gear
260
105
8810
219
57
12
ø5 ø8
note : photometric result tested based on 13500lm MH 150W coated bulb complete with 12” PC reflector
Pg02-45_NIKKON 2016-industrial.indd 21Pg02-45_NIKKON 2016-industrial.indd 21 4/25/17 2:23 PM4/25/17 2:23 PM
22
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
Refl ector & visor typeDS25400 - M 0250 - 22d
dimension
features
control gear housing• high quality cold rolled steel with epoxy powder coating power factor correction capacitor• 100˚C aluminium case self healing capacitor with
overpressure break action mechanism refl ector• polycarbonate refl ector for uniform light distribution polycarbonate diff user• optional diff user can be mounted onto the refl ector to
give better luminance control others• lamp holder and thermal resistant fi bre glass wire
technical data
voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 400Wholder type • E27 & E40colour of housing • light grey
refl ector & diff user matching table
casing model refl ector type lamp type diff user order code metal halide high pressure sodium mercury vapor 70W 150W 250W 400W 70W 150W 250W 400W 80W 125W 250W 400W DS70150 12” PC √ √ √ √ √ DS70150 16” PC √ √ √ √ X 19” PC √ √ √ √ √DS25400 22” PC √ √ √ √ DS25400 22” PC √ √ √ X* others matching are available upon request • PC : polycarbonate X : not matching √ : matching
DS series highbay
photometric curve
key for standard order coding
accessories
80
120
160
200
0º15º30º 30º45º 45º
60º
75º
90º
105º
120º
135º
60º
75º
90º
105º
120º
135º150º 165º 180º 165º 150º
15º
cd/klmC0/C180: C90/C270:
ø80
ø110
ø5 ø9
26
16”, 19” & 22” refractor mounting hole
Pg02-45_NIKKON 2016-industrial.indd 22Pg02-45_NIKKON 2016-industrial.indd 22 4/25/17 2:17 PM4/25/17 2:17 PM
Pg02-45_NIKKON 2016-industrial.indd 23Pg02-45_NIKKON 2016-industrial.indd 23 5/3/17 1:03 PM5/3/17 1:03 PM
24
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
dimension
model width depth height opening holeNL 150-RMS 400 mm 150 mm 400 mm 345 x 345 mmNL 400-RMS 500 mm 230 mm 500 mm 420 x 420 mmNL 150-SMS 345 mm 150 mm 345 mm -NL 400-SMS 420 mm 230 mm 420 mm -NL 150-SMR 250 mm 150 mm 430 mm -NL 400-SMR 320 mm 195 mm 600 mm -
features electrical system• built-in control gear suitable for HID lamp from 70W - 400W with
well ventilated control gear compartment refl ector• high purity aluminium refl ector with hammered/clear polished surface glass• thermal resistant tempered glass others• lamp holder and thermal resistant fi bre glass wire
technical data
voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 400Wholder type • E27 / E40colour of housing • white
NL series lowbay
key for standard order coding
features
matching table
model lamp type metal halide high pressure sodium mercury vapor carton dimension 70W 150W 250W 400W 70W 150W 250W 400W 80W 125W 250W 400W (L x W x H) mmNL 150-RMS √ √ √ √ √ √ 420 x 420 x 210NL 400-RMS √ √ √ √ √ √ 520 x 520 x 290NL 150-SMS √ √ √ √ √ √ 356 x 351 x 220NL 400-SMS √ √ √ √ √ √ 431 x 431 x 296NL 150-SMR √ √ √ √ √ √ 450 x 270 x 230NL 400-SMR √ √ √ √ √ √ 610 x 340 x 270RMS : recessed mount square • SMS : surface mount square • SMR : surface mount rectangular x : not matching √ : matching
photometric curve
w
NL SERIES SMS NL SERIES RMS NL SERIES SMR
w w d d d
h h h
note : photometric result tested based on 19000lm MH 250W coated bulb
150
100
300
250
200
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
NL400 RMS - M 0250capacity code : example = 250W
lamp type : M = metal halide S = high pressure sodium H = mercury vapor
model
Pg02-45_NIKKON 2016-industrial.indd 24Pg02-45_NIKKON 2016-industrial.indd 24 4/25/17 2:17 PM4/25/17 2:17 PM
25
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
features:
material• high quality cold rolled steel with epoxy powder coating electrical system• built – in control gear suitable for HID lamp from 250W – 400W refl ector• high purity aluminium refl ector with hammered surface glass• thermal resistant tempered glass gasket• high durability silicon gasket other• lamp holder and thermal resistant fi bre glass wire
technical data
Ingress protection (IP) • IP 65voltage • 220 ~ 240 Vac 50 / 60Hzlamp wattage • 250 ~ 400Wholder type • E40colour of housing • white
dimension
SMS IP rated Lowbay
key for standard order coding
photometric curve
order code
casing model lamp type lamp holder carton dimension (L x W x H) mm order codeSMS IP Lowbay MH 250W Tubular E40 430 x 426 x 195 SMS IP Lowbay – M0250SMS IP Lowbay MH 400W Tubular E40 430 x 426 x 195 SMS IP Lowbay – M0400SMS IP Lowbay HPS 250W Tubular E40 430 x 426 x 195 SMS IP Lowbay – S0250SMS IP Lowbay HPS 400W Tubular E40 430 x 426 x 195 SMS IP Lowbay – S0400SMS IP Lowbay HPMV 250W Bulb E40 430 x 426 x 195 SMS IP Lowbay – H0250SMS IP Lowbay HPMV 400W Bulb E40 430 x 426 x 195 SMS IP Lowbay – H0400
420
420
271
236
300
200
600
500
400
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
note : photometric result tested based on 36000lm MH 400W tubular
SMS IP LOWBAY - M 0400
lamp type : M = metal halide S = high pressure sodium H = mecury vapor
casing model
capacity code : example = 400W
Pg02-45_NIKKON 2016-industrial.indd 25Pg02-45_NIKKON 2016-industrial.indd 25 4/25/17 2:23 PM4/25/17 2:23 PM
26
STREET LIGHTING
Pg02-45_NIKKON 2016-industrial.indd 26Pg02-45_NIKKON 2016-industrial.indd 26 4/25/17 2:17 PM4/25/17 2:17 PM
27
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
matching table
housing model lamp type lamp holder casing dimension (mm) weight (kg) carton dimension order code high pressure sodium a b c d (L x W x H) mm 70W 150W 250W 400WS419-70 √ E27 500 200 136 50 5.0 455 x 230 x 140 S419-70-S0070S419-150 √ √ E27 & E40 639 269 170 50 7.5 580 x 290 x 195 S419-150-S0150S419-250 √ √ E40 764 302 189 65 10.5 690 x 330 x 210 S419-250-S0250S419-400 √ √ E40 880 354 260 65 15.5 820 x 375 x 230 S419-400-S0400* metal halide & mercury vapor street lantern are available upon request.
features
electrical system• built-in control gear suitable for HID lamps from 70W - 400W housing• high pressure die-cast aluminium with AKzo Nobel Interpon
outdoor epoxy powder coating glass bowl• thermal resistant tempered glass bowl refl ector• deep draw high purity anodized aluminium refl ector spigot• standard spigot: 7° suitable for side entry mounting & post-top mounting (upon request)• customized spigot: 0° (Upon Request) only suitable for side entry mounting compliance and approvals• sirim general requirement & test IEC60598-1:2003• sirim particular requirement (street lantern) IEC60598-2-3• TUV photometry CIE 121:1996 CIE 70 :1987• CE marking• TUV type test EN55015:2006 + A1 2007 EN61547:1995 + A1:2000 EN61000-3-2:2006 (class c) EN61000-3-3:1995 + A1, :2001 + A2, :2005 IEC60598-2-3:2002 EN60598-2-3:2003
technical data
ingress protection • IP66 (lamp compartment) & IP66 (gear compartment)insulation class • class I (note : class II is available upon request) voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 400Wholder type • E27 & E40maximum weight • 15.5kgdesigned standards • IEC 60598-2-3spigot size • ø50 mm - S419-70 & S419-150 • ø65 mm - S419-250 & S419-400
photometric curve
dimension
key for standard order coding
a
d
b c
400
300
200
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
C0 C180
C90
C270
note : photometric result tested based on 48000lm HPS 400W clear tube
S419
Pg02-45_NIKKON 2016-industrial.indd 27Pg02-45_NIKKON 2016-industrial.indd 27 4/25/17 2:23 PM4/25/17 2:23 PM
28
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
technical data
ingress protection • IP66 (lamp compartment) & IP54 (gear compartment)insulation class • class Ivoltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 250Wholder type • E27 & E40 lamp holdermax. weight • S412-150 (6.5kg) • S412-250 (8.80kg)designed standard • IEC 60598-2-3spigot size • S412-150 (ø42-ø50 mm) • S412-250 (ø48-ø60 mm)
matching table
casing model lamp type lamp holder carton dimension (L x W x H) mm order codeS412-150 HPS 70W tubular E27 580 x 280 x 190 S412-150-S0070S412-150 HPS 100W tubular E40 580 x 280 x 190 S412-150-S0100S412-150 HPS 150W tubular E40 580 x 280 x 190 S412-150-S0150S412-150 MH 70W tubular E27 580 x 280 x 190 S412-150-M0070S412-150 MH 150W tubular E27 580 x 280 x 190 S412-150-M0150S412-250 HPS 250W tubular E40 725 x 340 x 225 S412-250-S0250S412-250 MH 250W tubular E40 725 x 340 x 225 S412-250-M0250
dimension
key for standard order coding
features
electrical system• built-in control gear suitable for HID lamp from 70W - 250W body frame• high pressure die-cast aluminium with AKzo Nobel Interpon outdoor epoxy powder coating glass bowl• thermal resistant tempered glass bowl refl ector• deep draw high purity anodized aluminium refl ector spigot• suitable for side entry mounting epoxy paint• light grey compliance• IEC 60598-2-3:1997• IEC 60598-1:2003
S412
photometric curve
S412 - 150 - S 0150
M = metal halide
640
480
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
600
500
400
300
200
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
Pg02-45_NIKKON 2016-industrial.indd 28Pg02-45_NIKKON 2016-industrial.indd 28 4/25/17 2:17 PM4/25/17 2:17 PM
29
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
S438-N
dimension
key for standard order coding
matching table
housing model lamp type lamp holder carton dimension (L x W x H) mm order codeS438-N HPS 150W tubular E40 675 x 315 x 190 S438-N-S0150S438-N HPS 250W tubular E40 675 x 315 x 190 S438-N-S0250S438-N MH 250W tubular E40 675 x 315 x 190 S438-N-M0250
technical data
ingress protection • IP66 (lamp compartment) & IP54 (gear compartment)insulation class • class 1voltage • 220 - 240 Vac 50 /60Hzlamp wattage • 150W - 250Wholder type • E27 & E40maximum weight • 8.8 kg designed standards • IEC 60598-2-3spigot size • ø42 mm - ø48 mm
features electrical system• built-in control gear suitable for HID lamps from 150W - 250W body frame• high pressure die-cast aluminium with AKzo Nobel Interpon outdoor epoxy powder coating glass bowl• thermal resistant tempered glass bowl refl ector• deep draw high purity anodized aluminium refl ector spigot• suitable for side entry mounting compliance and approvals• sirim general requirement & test IEC60598-1• sirim particular requirement (street lantern) IEC60598-2-3
photometric curve
S438-N M 0150capacity code : example = 150W
lamp type : M = metal halide
S = high pressure sodium
housing model
ø52
660
300 180
1000
800
600
400
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
C0 C180
C90
C270
note : photometric result tested based on 27000lm HPS 250W clear tube
Pg02-45_NIKKON 2016-industrial.indd 29Pg02-45_NIKKON 2016-industrial.indd 29 4/25/17 2:23 PM4/25/17 2:23 PM
30
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
features electrical system• built-in control gear suitable for HID lamps from 70W - 150W housing• high pressure die-cast aluminium with AKzo Nobel Interpon outdoor epoxy powder coating glass bowl• thermal resistant glass bowl refl ector• anodized aluminium refl ector spigot• suitable for side entry mounting
S159
photometric curve
technical data
ingress protection • IP66 (lamp compartment) & IP54 (gear compartment)insulation class • class Ivoltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 150Wholder type • E27 & E40maximum weight • 5.5 kg spigot size • ø50 mm
order code
casing model lamp type lamp holder carton dimension (L x W x H) mm order codeS159 MH 70W tubular / bulb E27 540 x 255 x 155 S159-M0070S159 MH 150W tubular / bulb E27 540 x 255 x 155 S159-M0150S159 HPS 70W tubular / bulb E27 540 x 255 x 155 S159-S0070S159 HPS 150W tubular E40 540 x 255 x 155 S159-S0150S159 HPMV 125W bulb E27 540 x 255 x 155 S159-H0125
key for standard order coding
capacity code
lamp type : M = metal halide
: example = 70W
S = high pr essur e sodium H = mer cury vapor
casing mode l
dimension
529245
242
3 4
1 Ø50
300
200
400
600
500
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
C0 C180
C90
C270
note : photometric result tested based on 14500lm HPS 150W clear tube
Pg02-45_NIKKON 2016-industrial.indd 30Pg02-45_NIKKON 2016-industrial.indd 30 4/25/17 2:17 PM4/25/17 2:17 PM
Pg02-45_NIKKON 2016-industrial.indd 31Pg02-45_NIKKON 2016-industrial.indd 31 4/25/17 2:21 PM4/25/17 2:21 PM
32
ARCHITECTURAL LIGHTING
Pg02-45_NIKKON 2016-industrial.indd 32Pg02-45_NIKKON 2016-industrial.indd 32 4/25/17 4:00 PM4/25/17 4:00 PM
33
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
S1070
order code
model lamp type lamp holder carton dimension (L x W x H) mm ordering codeS1070 empty body E27 310 x 270 x 190 S1070-EB S1070 MH70W tubular/bulb E27 310 x 270 x 190 S1070-M-0070 S1070 HPS 70W tubular/bulb E27 310 x 270 x 190 S1070-S-0070 S1070 HPMV 80W bulb E27 310 x 270 x 190 S1070-H-0080 S1070 HPMV 125W bulb E27 310 x 270 x 190 S1070-H-0125S1070 CFL 2 x 26W tubular G24d-3 310 x 270 x 190 S1070-C-0226S1070 CFL 2 x 18W tubular G24d-2 310 x 270 x 190 S1070-C-0218 • EB = empty body
features
body• die - cast aluminium diff user• clear injection moulded polycarbonate with computer designed internal prism to provide a uniform light distribution in all directions. Via stainless steel screws system, the diff user can be opened, but remains hinged on the body refl ector • high purity clear polished aluminium in order to maximize light output and effi ciency
technical data
ingress protection • IP65voltage • 220 - 240 Vac 50/60Hzlamp type • CFL lamp & HID lamp
application • parking lot• shopping center• parks• exterior wall of buildings• any commercial of architectural walls
dimension
key for standard order coding
photometric curve
265 200185
310 239
0º30º 15º45º
75º
60º
90º
105º
120º
135º
75º
60º
90º
105º
120º
135º
45º30º15º
180º
100120
140
80
60
40
150º 165º 150º165º
cd/klmC0/C180: C90/C270:
note : photometric result tested based on 5800lm HPS 70w coated bulb
Pg02-45_NIKKON 2016-industrial.indd 33Pg02-45_NIKKON 2016-industrial.indd 33 4/25/17 2:21 PM4/25/17 2:21 PM
34
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
order code
model no. of lamp fi tting dimension carton dimension weight (kg) qty/carton l lf w h (L x W x H) mmN118 1 x 18W 660 445 100 107 690 x 230 x 450 12.4 10N218 2 x 18W 660 445 150 107 390 x 340 x 360 13.5 8 N136 1 x 36W 1265 835 100 107 1290 x 230 x 275 13.5 6N236 2 x 36W 1265 835 150 107 1300 x 190 x 350 12.6 4* IP65 weather proof fi tting with fl uorescent lamp 58W is available upon request • lf : mounting hole pitch
dimension
features housing• manufactured with durable polycarbonate body diff user• injected transparent polycarbonate diff user refl ector• steel plate coated with white epoxy powder for better refl ection fastening latch• stainless steel clip gasket• high quality insulation rubber gasket for watertight seal purpose IP rating• gear compartment • lamp compartment compliance and approvals• sirim general requirement & test IEC60598-2-1:1997• sirim particular requirement IEC60598-1:2006 optional• Electronic Ballast • T8 LED Tube
application • parking lot• shopping center• parks• exterior wall of buildings• any commercial of architectural walls
photometric curve
T8 IP65 weather proof fi tting
l
lf
w
h
note : photometric result tested based on 2 x 36w fluorescent tube
0º30º 15º45º
75º
60º
90º
105º
120º
135º
75º
60º
90º
105º
120º
135º
45º30º15º
180º
100
120140
60
150º 165º 150º165º
cd/klmC0/C180: C90/C270:
40
80
ng
housing• manufactured with durable polycarbonate body
diff user• injected transparent polycarbonate diff user
refl ector• steel plate coated with white epoxy powder for better reflection
features
h i
Pg02-45_NIKKON 2016-industrial.indd 34Pg02-45_NIKKON 2016-industrial.indd 34 4/25/17 2:18 PM4/25/17 2:18 PM
35
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
T5 IP65 weather proof fi tting
features
housing• manufactured with durable polycarbonate body diff user• injected transparent polycarbonate diff user refl ector• steel plate coated with white epoxy powder for better refl ection fastening latch• stainless steel clip
applications
• distillation plants• boiler rooms• cold storage rooms• residential areas• garages
dimension
order codes
model no. of lamp fi tting dimension (mm) carton dimension weight l w h (L x W x H) mm N114 1 x 14W 608 100 80 623 x 105 x 87 0.9N214 2 x 14W 608 100 80 623 x 105 x 87 1.0N128 1 x 28W 1208 57 80 1223 x 64 x 85 1.2N228 2 x 28W 1208 100 80 1223 x 105 x 87 1.8
photometric curve
h
l
l
N114 / N214
h
l
l
N128 / N228
h
w
h
w
0º30º 15º45º
75º
60º
90º
105º
120º
135º
75º
60º
90º
105º
120º
135º
45º30º15º
180º
120
160
80
150º 165º 150º165º
cd/klmC0/C180: C90/C270:
note : photometric result tested based on 1200lm 14W T5 flourescent lamp
th durable polycarbonate body
rent polycarbonate diffuse
Pg02-45_NIKKON 2016-industrial.indd 35Pg02-45_NIKKON 2016-industrial.indd 35 4/25/17 2:21 PM4/25/17 2:21 PM
36
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
features housing• 304 stainless steel* 316 stainless steel available upon request diff user• thermal resistant tempered glass fastening latch• stainless steel clip optional• Electronic Ballast • T8 LED Tube
application • parking lot, shopping center, parks, exterior wall of buildings• any commercial of architectural walls
model no. of lamp fi tting dimension carton dimension weight (kg) l lf w h (L x W x H) mmS8118 1 x 18W 705 495 135 75 770 x 160 x 140 2.5S8218 2 x 18W 705 495 195 75 770 x 220 x 140 5.0S8136 1 x 36W 1305 1095 135 75 1365 x 160 x 140 3.5S8236 2 x 36W 1305 1095 195 75 1365 x 220 x 140 6.5*IP66 stainless steel fl uorescent fi tting with fl uorescent lamp 58W is available upon request • lf : mounting hole pitch
order code
T8 IP66 stainless steel fl uorescent fi tting
dimension
photometric curve
l
lf
top view
S8118 / S8218
front view
h
w w
front view
h
top view
S8236 / S8136
l
lf
60
40
80
120
100
140
0º15º30º
45º
60º
75º
90º
105º
45º
60º
75º
90º
105º
30º15º
cd/klmC0/C180: C90/C270:
note : photometric result tested based on 2 x 36w fluorescent tube
Pg02-45_NIKKON 2016-industrial.indd 36Pg02-45_NIKKON 2016-industrial.indd 36 4/25/17 2:18 PM4/25/17 2:18 PM
Pg02-45_NIKKON 2016-industrial.indd 37Pg02-45_NIKKON 2016-industrial.indd 37 4/25/17 2:21 PM4/25/17 2:21 PM
38
LIGHTING ACCESSORIES
Pg02-45_NIKKON 2016-industrial.indd 38Pg02-45_NIKKON 2016-industrial.indd 38 4/25/17 2:18 PM4/25/17 2:18 PM
39
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
features rate supply voltage• 220V, 230V, 240V, 380V, 400V & 415V• 50Hz / 60Hz max. permissible temperature rise (∆t)• 70 - 85ºC rated max. operation temperature (tw)• 130ºC insulation class• class F manufacturing standard• IEC61347-2-9:2003, IEC 61347-1:2003 & IEC 60923:2008 accreditations and certifi cations• international : CE marking• domestic : SIRIM, TNB, JKR, SESCO
technical data
model capacity load power tw t capacitor watt dimension type weight carton dimension (W) current factor (ºC) (ºC) (µF) loss (mm) (kg) (L x W x H) mm (A) (pf.) (W) a b c d esodium/ 70 0.98 0.38 130 70 10 12 96 87 56 70 70 A 1.40 310 x 220 x 85 metal halide 100 1.20 0.43 130 70 15/16 15 96 87 56 70 70 A 1.45 310 x 220 x 85 150(LT) 1.80 0.40 130 70 20 18 120 106 56 70 70 A 2.39 250 x 210 x 85 250 3.00 0.42 130 70 30 25 110 102 82 99 85 A 3.88 290 x 250 x 130sodium 400 4.40 0.44 130 70 50 30 142 132 82 99 93 A 4.30 290 x 250 x 130 1000 10.30 0.42 130 70 100 74 218 158 95 133 114 B 12.0 240 x 170 x 150metal halide 250 2.13 0.52 130 70 20 22 120 106 56 70 70 A 2.45 290 x 250 x 130 400 3.50 0.51 130 70 30 30 110 102 82 99 85 A 3.72 290 x 250 x 130 1000 9.00 0.52 130 70 70 53 185 177 82 100 93 A 10.80 290 x 250 x 130 2000 15.60 0.52 130 85 115 122 190 160 112 152 130 C 14.72 240 x 170 x 150 2000 (415V) 9.50 0.49 130 75 50 130 190 160 112 152 130 C 15.2 240 x 170 x 150mercury 80 0.80 0.48 130 70 10 10 96 87 56 70 70 A 1.32 310 x 220 x 85 125 1.15 0.54 130 70 10 15 96 87 56 70 70 A 1.40 310 x 220 x 85 250 2.15 0.54 130 70 15/16 22 110 102 82 99 85 A 2.72 250 x 210 x 85 400 3.25 0.54 130 70 25/30 24 110 102 82 99 85 A 3.28 290 x 250 x 130 700 5.60 0.50 130 70 50 35 185 177 82 100 93 A 6.40 300 x 250 x 120 1000 7.00 0.60 130 75 50 37 185 177 82 100 93 A 7.52 290 x 250 x 130
dimension
wiring diagram
L
REDIGNITOR YEL
BLK
3 terminal ballast (MH & SON)pulse ignitor
PM
AL
N
C
BALLASTL
REDIGNITOR YEL
BLK
2 & 3 Terminal Ballast (MH & SON)superimposed ignitor
PM
AL
N
C
BALLASTL
2 terminal ballast (HPMV Only)
PM
AL
N
C
BALLAST
a b
side view
type A
top view
e c d
a
type B
side view top view
b
d
HID lamp ballast
Pg02-45_NIKKON 2016-industrial.indd 39Pg02-45_NIKKON 2016-industrial.indd 39 4/25/17 2:20 PM4/25/17 2:20 PM
40
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
technical data
model input voltage (V) frequency ignition voltage max housing weight (kg) min operating temperature temperature9000 PI 220 - 240 50/60Hz 4.0 - 5.0 KV 90ºC 0.076 -30ºCSP 9003 220 - 240 50/60Hz 3.5 - 4.5 KV 85ºC 0.130 -30ºCSP 9006 220 - 240 50/60Hz 3.5 - 3.8 KV 90ºC 0.060 -30ºC
for domestic marketmodel input voltage (V) frequency ignition voltage max housing weight (kg) min operating temperature temperatureSQ 9003 220 - 240 50/60Hz 3.5 - 4.5 KV 85ºC 0.130 -30ºC
order code
model ignitor type lamp type carton dimension (L x W x H) mm order code9000PI pulse MH 250 - 2000W / HPS 150 - 1000W 300 x 220 x 115 9000PISP 9003 superimposed MH / HPS 70W - 400W 260 x 190 x 200 SP 9003SP 9006 superimposed MH / HPS 70W - 150W 260 x 190 x 200 SP9006
for domestic marketorder code
model ignitor type lamp type carton dimension (L x W x H) mm order codeSQ 9003 superimposed MH / HPS 70W - 400W 260 x 190 x 200 SQ 9003
features main voltage• 220V - 240V 50Hz / 60Hz single point fi xing• nylon casing with M8 fastening maintenance free• fully electronic control manufacturing standard• MS IEC 61347-1: 2003, MS IEC 61347-2-1: 2003 & MS IEC 60927: 2003 accreditations and certifi cations• international : CE marking• domestic : SIRIM
Ignitor (nylon casing)
dimension
wiring diagram
32 36 46
30
64 74 92
33 39
SP9006 SP9003 / SQ9003 9000PI
BALLAST
L
CB
N
LpSUPER IMPOSED IGNITOR
Superimposed ignitor
SP9003 / SP9006 / SQ9003 9000PI
LAM
P
LAM
P
N
Pulse ignitor
BALLAST
L
CB
N
N
PULSEIGNITOR
Pg02-45_NIKKON 2016-industrial.indd 40Pg02-45_NIKKON 2016-industrial.indd 40 4/25/17 2:18 PM4/25/17 2:18 PM
41
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
features main voltage• 220V - 240V 50Hz / 60Hz single point fi xing• aluminium casing with M8 fastening maintenance free• fully electronic control timer cut-off (for SP 9008T)• able to detect lamp failure or end of lamp life and cut-off strinking voltage manufacturing standard• IEC 60926 & IEC 60927 accreditations and certifi cations• international : CE marking• domestic : SIRIM, TNB, JKR, SESCO
dimension
Superimposed ignitor (aluminium casing)
wiring diagram
order code
model ignitor type timer protection suitable lamp type IP rated carton dimension (L x W x H) mm order codeSP 9008 superimposed - MH & HPS 100W - 400W IP65 270 x 230 x 200 SP 9008SP 9008T superimposed cut off MH & HPS 100W - 400W IP65 260 x 185 x 200 SP 9008TSP 9009 superimposed - HPS 1000W & MH 1000W - 2000W IP65 300 x 200 x 260 SP 9009SP 9011 superimposed - HPS 1000W & MH 1000W - 2000W IP65 300 x 190 x 150 SP 9011
technical data
ignitor model input frequency ignition voltage max housing min operating weight (kg) diameter length voltage (V) temperature temperature b aSP 9008 220 - 240 50/60Hz 2.8 - 5.0 KV 105ºC -30ºC 0.14 36 mm 95 mmSP 9008T 220 - 240 50/60Hz 2.8 - 5.0 KV 105ºC -30ºC 0.14 36 mm 120 mmSP 9009 220 - 240 50/60Hz 3.0 - 4.0 KV 105ºC -30ºC 0.45 55 mm 120 mmSP 9011 380 - 415 50/60Hz 4.0 - 5.0 KV 105ºC -30ºC 0.32 55 mm 92 mm
b
M8 x 10
top view
bottom viewfront view
a
Superimposed ignitor
240V
BALLAST
LL
CB
N
LpIGNITOR
PM
AL
N
Pg02-45_NIKKON 2016-industrial.indd 41Pg02-45_NIKKON 2016-industrial.indd 41 4/25/17 2:20 PM4/25/17 2:20 PM
42
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
IP43 remote control gear
features housing• high quality cold rolled steel complete with epoxy coating
technical data
ingress protection • IP43voltage • 220 - 240 Vac 50 Hz / 60Hzlamp wattage • 250W - 1000Wcolour of housing • S5100 - UC - black S5025 / S5040 - light greyweight • 14.75 kg
order code
model lamp watt lamp type IP rated carton dimension (L x W x H) mm order codeS5100 - UC 1000W MH / HPS / HPMV IP43 360 x 290 x 230 S5100 - UCS5025 - OC 250W MH / HPS / HPMV IP43 365 x 154 x 145 S5025 - OCS5040 - OC 400W MH / HPS / HPMV IP43 365 x 154 x 145 S5040 - OC
key for standard order coding
capacity code : example = 1000W
lamp type : M = metal halide : S = high pressure sodium : H = mercury vapor
housing material : A = high pressure die-cast aluminium : C = cold rolled steel
usage : O = outdoor : U = universalcasing model
S5100 U C -M 1000
dimension
S5100-UC
260 180
300
147 265
ø8 x 15 (mm) slot
315
350
140 140
S5025 - S5040 -OC
Pg02-45_NIKKON 2016-industrial.indd 42Pg02-45_NIKKON 2016-industrial.indd 42 4/25/17 2:19 PM4/25/17 2:19 PM
43
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
IP65 remote control gear
features housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon outdoor epoxy powder coating
technical data
ingress protection • IP65voltage • 220 - 240 Vac 50 Hz / 60Hzlamp wattage • 1000W - 2000Wcolour of housing • blackweight • MH 1000W - 14 kg • MH 2000W - 19.5 kg • HPS 1000W - 15.5 kg
order code
model lamp watt lamp type IP rated carton dimension (L x W x H) mm order codeS5100 - UA 1000W MH / HPS / HPMV IP65 410 x 285 x 205 S5100 - UAS5150 - UA 1500W MH IP65 410 x 285 x 205 S5150 - UAS5200 - UA 2000W MH IP65 410 x 285 x 205 S5200 - UA
dimension
key for standard order coding
S5100-UA - S5200-UA
232 250
180
ø10
200
363
Pg02-45_NIKKON 2016-industrial.indd 43Pg02-45_NIKKON 2016-industrial.indd 43 4/25/17 2:20 PM4/25/17 2:20 PM
44
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
order code
model lamp watt lamp type carton dimension (L x W x H) mm order codeS5035 - IC 35W MH / HPS / HPMV 290 x 96 x 113 S5035 - ICS5007 - IC 70W MH / HPS / HPMV 290 x 96 x 113 S5007 - ICS5015 - IC 150W MH / HPS / HPMV 290 x 96 x 113 S5015 - IC
applicable lamp type
brand lamp typePhilips CDM Master Color E27 par bulb, G12 single ended, RX7s double endedGE Constant Color E27 par bulb, G12 single ended, RX7s double endedOsram POWERBALL E27 par bulb, G12 single ended, RX7s double endedEYE CERA ARC / COLOR ARC E27 par bulb, G12 single ended, RX7s double ended
Indoor remote control gear
features electrical system• remote control gear suitable for ceramic HID lamps from 35W - 150W with ventilated design compartment
housing• epoxy powder coated body to increase the reliability of the enclosure
technical data
voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • HID 35W - 150Wcolour of housing • light greyweight • 35W - 1.8 kg • 70W - 2.0 kg • 150W - 2.9 kg
dimension
key for standard order coding
remote control gear
10
105
270 88
57
12
219
ø5
ø8
Pg02-45_NIKKON 2016-industrial.indd 44Pg02-45_NIKKON 2016-industrial.indd 44 4/25/17 2:19 PM4/25/17 2:19 PM
45
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
order code
model lamp type emergency duration battery rating weight (kg)ELM 726 NC (PLC) PLC 26W & below 1 - 3 hours 6V 4.0AH nickel cadmium 1.5(nickel - cadmium)
Emergency lighting module (power pack)
features installation• install in minutes. no special hardware or tools is required battery unit• overcharge protection provided by circuit
charger for extended battery life• long life sealed lead acid battery / nickel - cadmium battery housing• cold rolled steel complete with epoxy powder coated paint manufacturing standard• MS 619 : Part : 102 : SECT 102.22 1985 (P)
technical data
voltage • 220 - 240 Vac 50Hzbattery life • 500 cycles on standbycharging time : 24 hours after installation or emergency used
dimension
model dimension (mm) carton dimension (mm) a b c d e L W H ELM726NC (PLC) 74 285 39 248 10 230 85 65(nickel-cadmium)
wiring diagram
ELM 726NC (PLC)(nickel - cadmium)
LN
Model : ELM726NCRated Voltage : 220V ~ 240VacFrequency : 50Hz ~ 60HzEmer Duration : 1 ~ 3hrsCharging : 24hrsLamp : PLC 7W ~ 26W
From switch live
Ballast
UNSWITCHED SUPPLY
BW
TS
ALLA
B
PLC Lamp
Switch
b
d
e
ac
Pg02-45_NIKKON 2016-industrial.indd 45Pg02-45_NIKKON 2016-industrial.indd 45 4/25/17 2:20 PM4/25/17 2:20 PM
46
INDOOR COMMERCIALLIGHTING
DIE-CAST RECESSED LUMINAIRE
Pg46-65_NIKKON 2016-indoor commercial.indd 46Pg46-65_NIKKON 2016-indoor commercial.indd 46 4/25/17 2:45 PM4/25/17 2:45 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
47
dimensionME S15118
features
housing• cold roll steel trim material• cold roll steel & die-cast aluminium refl ector• high purity anodized aluminium lamp type• 1x PLC lamp wattage• max 26W fi nishing• epoxy powder coating lamp holder• G24d-3 / 2 pin
ET S10184ET S10181 ET S10187 ET S10190
technical data
model colour lamp holder description carton dimension (L x W x H) mm weight (kg)ET S10181 white G24d-3 beehive refl ector 200 x 235 x 200 0.80ET S10184 white G24d-3 matt anodised refl ector 200 x 235 x 200 0.80ET S10187 white G24d-3 sand blasted + clear anodised refl ector 200 x 235 x 200 0.80ET S10190 white G24d-3 beehive refl ector + semi-frosted glass 200 x 235 x 200 0.80
photometric curveET S10181 ET S10184
ET S10187 ET S10190
190
228
ET series [ Die-cast recessed luminaire-CFL ]
Pg46-65_NIKKON 2016-indoor commercial.indd 47Pg46-65_NIKKON 2016-indoor commercial.indd 47 4/25/17 2:50 PM4/25/17 2:50 PM
48
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
dimensionME S15118 ME S15121 ME S15124 & ME S15127
technical data
model colour lamp type lamp holder carton dimension (L x W x H) mm weight (kg) ME S15118 white adjustable projector G12 200 x 295 x 200 1.05 ME S15121 white adjustable projector E27 200 x 295 x 200 1.05ME S15124 & ME S15127 white fi xed projector (10 ⁄ 45 degree) G12 200 x 295 x 200 1.05
ME series [ Die-cast recessed luminaire-HID ]
features
housing• die-cast aluminium trim material• die-cast aluminium refl ector• high purity anodized aluminium lamp type• CDM-T / CDM- R PAR 30 wattage• 35W & 70W fi nishing• epoxy powder coating lamp holder• G12 & E27 lamp holder conforming to EN/VDE standard
ME S15118 ME S15121
photometric curveME S15118 ME S15121 ME S15124 & ME S15127
ME S15124 & ME S15127
CDM-7-70W/842 G12
Pg46-65_NIKKON 2016-indoor commercial.indd 48Pg46-65_NIKKON 2016-indoor commercial.indd 48 4/25/17 2:45 PM4/25/17 2:45 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
49
SO series [ Die-cast recessed luminaire-HID ]
dimensionSO S10109 SO S10112
technical data
model colour lamp holder carton dimension (L x W x H) mm weight (kg) SO S10109 white G12 180 x 155 x 180 0.63 SO S10112 white E27 180 x 155 x 180 0.53
features
housing• cold roll steel trim material• die-cast aluminium refl ector• high purity anodized aluminium lamp type• CDM-T / CDM- R PAR 30 wattage• 35W, 70W, & 150W fi nishing• epoxy powder coating lamp holder• G12 & E27 lamp holder conforming to EN/VDE standard
SO S10109 SO S10112
photometric curveSO S10109 SO S10112
Pg46-65_NIKKON 2016-indoor commercial.indd 49Pg46-65_NIKKON 2016-indoor commercial.indd 49 4/25/17 2:50 PM4/25/17 2:50 PM
50
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
PA series [ Die-cast recessed luminaire-CFL ]
PA S10124
technical data
model colour lamp holder carton dimension (L x W x H) mm weight (kg) PA S10115 (max 2 x 18W) white G24d-2 / G24q-2 200 x 125 x 345 0.8 C/W beehive refl ector match with PA S10118, PA S10121 & PA S10124PA S10175 (max 2 x 18W) white G24d-2 / G24q-2 200 x 125 x 345 0.71 C/W clear anodized refl ector match with PA S10127 & PA S10130* 1 x 18W model is available upon request
features
housing• cold roll steel trim material• die-cast aluminium refl ector• high purity anodized aluminium lamp type• 2 x PLC lamps wattage• Max 18W x 2 fi nishing• epoxy powder coating lamp holder• G24d-2 / 2 pin for magnetic ballast• G24q-2 / 4 pin for electronic ballast
dimensionPA S10115 & PA S10175
PA S10115 & PA S10175
example :
PA S10115 + PA S10124
housing code
housing model
trim type code
order code
For open trim, semi frosted glass trim and frosted glass trim (PA S10115) is the housing code. You need to complete the ordering code withthe type of trims.
For turbo trim and cross trim (PA S10175)is the housing code. You need to complete the ordering code with the type of trims.
accesories
model colour description weight (kg)PA S10118 (trim type) white 6” open trim 0.12PA S10121 (trim type) white 6” trim with frosted glass 0.27PA S10124 (trim type) white 6” trim with semi-frosted glass 0.27PA S10127 (trim + refl ector type) white 6” trim with turbo 0.28PA S10130 (trim + refl ector type) white 6” trim with cross 0.25
photometric curvePA S10118 PA S10121 PA S10130PA S10127
108
189
2 x 13W PLC LAMP 2 x 13W PLC LAMP 2 x 13W PLC LAMP 2 x 13W PLC LAMP
45º 45º
30º 15º 0º 15º 30º
90º 90º
105º 105º
75º 75º
200
250
300
15060º 60º 100
cd/klm C0-C180 C90-C270
2 x 13W PLC LAMP
Pg46-65_NIKKON 2016-indoor commercial.indd 50Pg46-65_NIKKON 2016-indoor commercial.indd 50 4/25/17 2:46 PM4/25/17 2:46 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
51
accesories
model colour description weight (kg)PA S10136 (trim type) white 8 ” open trim 0.14PA S10139 (trim type) white 8 ” trim with frosted glass 0.36PA S10142 (trim type) white 8 ” trim with semi-frosted glass 0.36PA S10145 (trim type) white 8 ” trim with turbo 0.33PA S10148 (trim type) white 8 ” trim with cross 0.29
PA S10142
technical data
model colour lamp holder carton dimension (L x W x H) mm weight (kg)PA S10133 (max 2 x 26W) white G24d-3 / G24q-3 235 x 140 x 365 0.92C/W beehive refl ector match with PA S10136, PA S10139 & PA S10142PA S10178 (max 2 x 26W) white G24d-3 / G24q-3 235 x 140 x 365 0.76C/W clear anodized refl ector match with PA S10145 & PA S10148
features
housing• cold roll steel trim material• die-cast aluminium refl ector• high purity anodized aluminium lamp type• 2 x PLC lamps wattage• Max 26W fi nishing• epoxy powder coating lamp holder• G24d-3 / 2 pin for magnetic ballast• G24q-3 / 4 pin for electronic ballast
dimensionPA S10133 & PA S10178
PA S10133 & PA S10178
example :
PA S10133 + PA S10136
housing code
housing model
trim type code
order code
For open trim, semi frosted glass trim and frosted glass trim (PA S10133) is the housing code. You need to complete the ordering code withthe type of trims.
For turbo trim and cross trim (PA S10178)is the housing code. You need to complete the ordering code with the type of trims.
photometric curvePA S10136 PA S10139 PA S10148PA S10145
133
Pg46-65_NIKKON 2016-indoor commercial.indd 51Pg46-65_NIKKON 2016-indoor commercial.indd 51 4/25/17 2:50 PM4/25/17 2:50 PM
52
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
TE series [ Die-cast recessed luminaire-CFL ]
TE S10157
technical data
model colour lamp holder carton dimension (L x W x H) mm weight (kg)
TE S10151 (max 2 x 18W) white G24d-2 / G24q-2 200 x 125 x 345 0.73* G24d-2 for magnet ballast G24q-2 for electronics ballast* 1 x 18W model is available upon request
features
housing• cold roll steel trim material• cold roll steel refl ector• high purity anodized aluminium lamp type• 2 x PLC lamps wattage• Max 18W x 2 fi nishing• epoxy powder coating lamp holder• G24d-2 / 2 pin • G24q-2 / 4 pin
dimensionTE S10151
example :
TE S10151 + TE S10157
housing code
housing model
refl ector code
order code
TE S10151 is the housing code. You need to complete the ordering code with the type of reflectors.
accesories
model description weight (kg)TE S10154 clear anodized aluminium refl ector 0.08TE S10157 matt fi nished aluminium refl ector 0.08TE S10160 beehive aluminium refl ector 0.08
photometric curveTE S10154 TE S10160
190
Pg46-65_NIKKON 2016-indoor commercial.indd 52Pg46-65_NIKKON 2016-indoor commercial.indd 52 4/25/17 2:46 PM4/25/17 2:46 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
53
TE S10169
technical data
model colour lamp holder carton dimension (L x W x H) mm weight (kg)
TE S10163 (max 2 x 26W) white G24d-3 / G24q-3 235 x 140 x 365 0.85* G24d-3 for magnet ballast G24q-3 for electronics ballast* 1 x 26W model is available upon request
features
housing• cold roll steel trim material• cold roll steel refl ector• high purity anodized aluminium lamp type• 2 x PLC lamps wattage• Max 26W x 2 fi nishing• epoxy powder coating lamp holder• G24d-3 / 2 pin • G24q-3 / 4 pin
dimensionTE S10163
example :
TE S10163 + TE S10169
housing code
housing model
refl ector code
order code
TE S10163 is the housing code. You need to complete the ordering code with the type of reflectors.
accesories
model description weight (kg)TE S10166 clear anodized aluminium refl ector 0.13TE S10169 matt fi nished aluminium refl ector 0.13TE S10172 beehive aluminium refl ector 0.13
photometric curveTE S10166 TE S10172
190
Pg46-65_NIKKON 2016-indoor commercial.indd 53Pg46-65_NIKKON 2016-indoor commercial.indd 53 4/25/17 2:49 PM4/25/17 2:49 PM
54
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
order code
MA S17106 is the housing code. You need to complete the ordering code with the housing and spot heads.
MA spot head series [ modular recessed luminaire ]
MA S17109
features
housing• cold roll steel trim material• cold roll steel refl ector• high purity anodized aluminium lamp type• CDM-T & CDM-R PAR 30 wattage• Max 35W – 150W fi nishing• epoxy powder coating lamp holder• G12 & E27 lamp holder
conforming to EN/VDE standard
example :
MA S17109 + MA S17118 + S17121
housing code
housing model another spot
head code
spot head code
dimensionMA S17106 MA S17112
MA S17106 MA S17109 MA S17112
technical data
model colour carton dimension (L x W x H) mm weight (kg) MA S17106 white 200 x 235 x 200 1.15 MA S17109 white 200 x 235 x 355 1.9 MA S17112 white 200 x 235 x 355 2.6
Pg46-65_NIKKON 2016-indoor commercial.indd 54Pg46-65_NIKKON 2016-indoor commercial.indd 54 4/25/17 2:47 PM4/25/17 2:47 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
55
MA spot head series description
MA Spot Head Series – S17118 trim material• die – cast aluminium refl ector• high purity anodized aluminium lamp type• CDM-T wattage• max 35W – 150W fi nishing• epoxy powder coating lamp holder• G12 lamp holder conforming to EN/VDE standard
MA Spot Head Series – S17121 trim material• die – cast aluminium lamp type• CDM-R PAR30 wattage• max 35W – 150W fi nishing• epoxy powder coating lamp holder• E27a lamp holder conforming to EN/VDE standard
spot head
model colour lamp holder carton dimension (L x W x H) mm weight (kg) MA S17118 CDM-T (35W / 70W / 150W max 1 x G12) white G12 120 x 160 x 120 0.36 MA S17121 PAR30 / CDM-R (35W / 70W max 1 x E27) white E27 120 x 160 x 120 0.24
MA S17121 PAR30 / CDM-R (35W / 70W max 1 x E27)
photometric curveMA S17118 CDM-T (35W / 70W / 150W 1 x G12)
Pg46-65_NIKKON 2016-indoor commercial.indd 55Pg46-65_NIKKON 2016-indoor commercial.indd 55 4/25/17 2:49 PM4/25/17 2:49 PM
56
PENDANT & CEILING MOUNTEDLUMINAIRE
Pg46-65_NIKKON 2016-indoor commercial.indd 56Pg46-65_NIKKON 2016-indoor commercial.indd 56 4/25/17 2:47 PM4/25/17 2:47 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
57
dimensionCO S14103CO S14100
technical data
model lamp holder carton dimension (L x W x H) mm weight (kg)
CO S14100 16” PC refractor & AL pendant head 180 x 150 x 180 1.50 * PC diff user is available upon request
CO S14103 14” AL refl ector & AL pendant head 180 x 150 x 180 1.70 * Complete with sand blasted tempered glass
features
CO Series – S14100 head material• extruded aluminium refl ector• polycarbonate diff user• polycarbonate lamp type• HID & PLCE lamp wattage• max 150W fi nishing• epoxy powder coating lamp holder• E27
CO Series – S14103 head material• extruded aluminium refl ector• 2mm thick 99.9% super purity aluminium glass visor• sand blasted tempered glass clip• technopolymer latch lamp type• PLCE lamp wattage• max 150W fi nishing• epoxy powder coating lamp holder• E27
CO S14100 CO S14103
photometric curveCO S14100 CO S14103
CO series [ pendant luminaire ]
CO S14103
Pg46-65_NIKKON 2016-indoor commercial.indd 57Pg46-65_NIKKON 2016-indoor commercial.indd 57 4/25/17 2:48 PM4/25/17 2:48 PM
58
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
photometric curveIR S12106 IR S12109
dimensionIR S12109IR S12106
IR series [ ceiling mounted luminaire ]
technical data
model colour lamp holder carton dimension (L x W xH) mm weight (kg)IR S12106 (PLCE 26W max 1 x E27) white E27 205 x 210 x 205 0.9 IR S12109 (PLC 18W max 2 x G24d-2) white G24d-2 235 x 190 x 235 1.15* Black and silver available upon request
features
IR Series – S12106 housing• cold roll steel refl ector• high purity anodized aluminium lamp type• PLCE lamp wattage• max 26W fi nishing• epoxy powder coating lamp holder• E27 lamp holder conforming to EN/VDE standard
IR Series – S12109 housing• cold roll steel refl ector• high purity anodized aluminium lamp type• 2 x PLC lamps wattage• max 18W fi nishing• epoxy powder coating lamp holder• G24d-2 / 2 pin
IR S12106 IR S12109
Pg46-65_NIKKON 2016-indoor commercial.indd 58Pg46-65_NIKKON 2016-indoor commercial.indd 58 4/25/17 2:47 PM4/25/17 2:47 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
59
technical data
model colour lamp holder carton dimension (L x W xH) mm weight (kg)TA S12100 (PLCE 26W max 1 x E27) white E27 305 x 190 x 305 1.4
dimension
TA series [ ceiling mounted luminaire ]
features
housing• cold roll steel refl ector• high purity anodized aluminium lamp type• PLCE lamp wattage• max 26W fi nishing• epoxy powder coating lamp holder• E27 lamp holder conforming to EN/VDE standard
photometric curve
298
195
Pg46-65_NIKKON 2016-indoor commercial.indd 59Pg46-65_NIKKON 2016-indoor commercial.indd 59 4/25/17 2:48 PM4/25/17 2:48 PM
60
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
technical data
model description colour lamp holder carton dimension (L x W xH) mm weight (kg)IS S12103 (PLCE 20W max 1 x E27) beehive and frosted facet projector white E27 180 x 240 x 180 0.95
dimension
IS series [ ceiling mounted luminaire ]
features
housing• cold roll steel refl ector• high purity anodized aluminium lamp type• PLCE lamp wattage• max 20W fi nishing• epoxy powder coating lamp holder• E27 lamp holder conforming to EN/VDE standard
photometric curve
Pg46-65_NIKKON 2016-indoor commercial.indd 60Pg46-65_NIKKON 2016-indoor commercial.indd 60 4/25/17 2:47 PM4/25/17 2:47 PM
Pg46-65_NIKKON 2016-indoor commercial.indd 61Pg46-65_NIKKON 2016-indoor commercial.indd 61 4/25/17 2:48 PM4/25/17 2:48 PM
62
TRACK LIGHT & ACCESSORIES
Pg46-65_NIKKON 2016-indoor commercial.indd 62Pg46-65_NIKKON 2016-indoor commercial.indd 62 4/25/17 2:47 PM4/25/17 2:47 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
63
XE Series – S12115 & S13109
housing• die – cast aluminium refl ector• high purity anodized aluminium mounting method• surface & 3 phase track lamp type• CDM-T wattage• 35W & 70W fi nishing• epoxy powder coating lamp holder• G12 lamp holder conforming to EN/VDE standard
XE S13109XE S12115XE S13106XE S12112
technical data
model colour lamp holder carton dimension (L x W xH) mm weight (kg)XE S12112 (surface mounted) white E27 140 x 295 x 195 1.25XE S13106 (3-phase track mounted) white E27 140 x 295 x 195 1.25XE S12115 (surface mounted) white G12 140 x 270 x 195 1.25XE S13109 (3-phase track mounted) white G12 140 x 270 x 195 1.25
photometric curveXE S12112 XE S13109XE S13106 XE S12115
dimensionXE S12112 XE S13109XE S13106 XE S12115
features
XE Series – S12112 & S13106
housing• die – cast aluminium refl ector• high purity anodized aluminium mounting method• surface & 3 phase track lamp type• CDM-R PAR30 wattage• 35W & 70W fi nishing• epoxy powder coating lamp holder• E27 lamp holder conforming to EN/VDE standard
193
115217
115187
207
XE series [ track light and accessories ]
Pg46-65_NIKKON 2016-indoor commercial.indd 63Pg46-65_NIKKON 2016-indoor commercial.indd 63 4/25/17 2:48 PM4/25/17 2:48 PM
64
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
description
MO three-circuit system lets you select the style of lighting that’s right for the being lit.
Thanks to the system’s three built-in independently controlled circuits, a twist of the dial lets you switch circuits, makes it easy to control lightings to match changes in time of day, furnishing and decorations, and other characteristics of the area being lit.
This multiple-circuit system makes a convenient addition to spaces ranging from department stores to art museums.
Its refined design ensures that even long duct runs will have a beautiful, finished appearance.
MO series [ track light and accessories ]
accesories
model colour description MO S18100 white 3 circuit trunking rail 1000 mm without power connector and end cap MO S18103 white 3 circuit trunking rail 2000 mm without power connector and end cap MO S18106 white 3 circuit trunking rail 3000 mm without power connector and end capMO S19100 white 3 circuit trunking rail power connector MO S20100 white 3 circuit trunking rail end cap MO S19103 white 3 circuit trunking rail series T type connector (right) MO S19106 white 3 circuit trunking rail series T type connector (left)MO S19109 white 3 circuit trunking rail series L type connector (right)MO S19112 white 3 circuit trunking rail series L type connector (left)
MO S18103
MO S20100
MO S19109
MO S18106
MO S19103
MO S19112
dimension
MO S18100
MO S19100
MO S19106
Pg46-65_NIKKON 2016-indoor commercial.indd 64Pg46-65_NIKKON 2016-indoor commercial.indd 64 4/25/17 2:47 PM4/25/17 2:47 PM
Pg46-65_NIKKON 2016-indoor commercial.indd 65Pg46-65_NIKKON 2016-indoor commercial.indd 65 4/25/17 2:48 PM4/25/17 2:48 PM
66
OUTDOOR ARCHITECTURALLIGHTING
GALILEO
Pg66-90_NIKKON 2016-outdoor architecture.indd 66Pg66-90_NIKKON 2016-outdoor architecture.indd 66 4/25/17 3:03 PM4/25/17 3:03 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
67
application
• residential areas• commercial areas• parks• city centers• car parks• public & private areas• pedestrian precincts
technical data
input voltage• 220 - 240Vac lamp type• HID lamp wattage• 35W - 70W lamp holder• E27 spigot size• ø76mm insulation class• class 1 ingress protection• IP54 maximum weight• 6.0 kg (without pole and gear)
order code
model lamp type lamp holder carton dimension (L x W x H) mm order code
GALILEO L130701 MH35W w/o pole tubular / bulb E27 740 x 740 x 445 GALILEO L130701-M0035GALILEO L130701 MH70W w/o pole tubular / bulb E27 740 x 740 x 445 GALILEO L130701-M0070GALILEO L130701 MH35W c/w pole tubular / bulb E27 740 x 740 x 445 GALILEO L130701-M0035-PGALILEO L130701 MH70W c/w pole tubular / bulb E27 740 x 740 x 445 GALILEO L130701-M0070-PGALILEO L130701 HPS70W w/o pole tubular / bulb E27 740 x 740 x 445 GALILEO L130701-S0070GALILEO L130701 HPS70W c/w pole tubular / bulb E27 740 x 740 x 445 GALILEO L130701-S0070-P*M: Metal halide S: Sodium P: Pole
dimension
features
• elegance lighting system designed for discharge lamps. The system is designed for efficiently illuminating the desired areas.
• corrosion resistant die-cast aluminium optical housing with weather resistant epoxy powder coating and stainless steel screws to provide the superior quality fi nish for all weather conditions.
• closed by opal UV stabilized PMMA diff user, provide soft light with a large illumination
area suitable for external applications.• poles are available in galvanised steel with
primary powder coating for high corrosion resistance on request.
photometric curve
base dimension
Ø738
note: standard 3m pole comes with the luminaire. Other pole height is available upon request.
3400
3000 note : photometric result tested based on 6000lm
HPS70w tube
Galileo L130701
or discharge r efficiently
ium optical oxy powder provide the r conditions.MA diff user,illuminationons. steel with corrosion
Pg66-90_NIKKON 2016-outdoor architecture.indd 67Pg66-90_NIKKON 2016-outdoor architecture.indd 67 4/25/17 4:16 PM4/25/17 4:16 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
68
order code
model lamp type lamp holder carton dimension (L x W x H) mm order code
GALILEO L130702 MH35W w/o pole tubular / bulb E27 740 x 740 x 445 GALILEO L130702-M0035GALILEO L130702 MH70W w/o pole tubular / bulb E27 740 x 740 x 445 GALILEO L130702-M0070GALILEO L130702 MH35W c/w pole tubular / bulb E27 740 x 740 x 445 GALILEO L130702-M0035-PGALILEO L130702 MH70W c/w pole tubular / bulb E27 740 x 740 x 445 GALILEO L130702-M0070-PGALILEO L130702 HPS70W w/o pole tubular / bulb E27 740 x 740 x 445 GALILEO L130702-S0070GALILEO L130702 HPS70W c/w pole tubular / bulb E27 740 x 740 x 445 GALILEO L130702-S0070-P*M: Metal halide S: Sodium P: Pole
application
• residential areas• commercial areas• parks• city centers• car parks• garden• pedestrian precincts
technical data
input voltage• 220 - 240Vac lamp type• HID lamp wattage• 35W - 70W lamp holder• E27 spigot size• ø76mm insulation class• class 1 ingress protection• IP54 maximum weight• 6.0 kg (without pole and gear)
dimension
Galileo L130702
features
• elegance lighting system designed for discharge lamps. The system is designed for efficiently illuminating the desired areas.
• corrosion resistant die-cast aluminium optical housing with weather resistant epoxy powder coating and stainless steel screws to provide the superior quality fi nish for all weather conditions.
• the optical system used in conjunction with the UV-stabilized transparent PMMA diff user version consists of an aluminium louver system providing glare control.
• poles are available in galvanised steel with primary powder coating for high corrosion resistance on request.
photometric curve
base dimension
W H) d d
gear)
esigned for discharge igned for efficiently
areas.st aluminium optical istant epoxy powder screws to provide the ll weather conditions.in conjunction with
arent PMMA diff user minium louver system
lvanised steel with for high corrosion
Ø738
3400
3000
note: standard 3m pole comes with the luminaire. Other pole height is available upon request.
note : photometric result tested based on 6000lm HPS70w tube
Pg66-90_NIKKON 2016-outdoor architecture.indd 68Pg66-90_NIKKON 2016-outdoor architecture.indd 68 4/25/17 3:03 PM4/25/17 3:03 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
69
application
• residential areas• commercial areas• parks• city centers• car parks• hotels• pedestrian precincts
technical data
input voltage• 220 - 240Vac lamp type• HID lamp wattage• 35W - 70W lamp holder• E27 spigot size• ø76mm insulation class• class 1 ingress protection• IP54 maximum weight• 6.0 kg (without pole and gear)
order code
model lamp type lamp holder order code
GALILEO L130703 MH35W w/o pole tubular / bulb E27 GALILEO L130703-M0035GALILEO L130703 MH70W w/o pole tubular / bulb E27 GALILEO L130703-M0070GALILEO L130703 MH35W c/w pole tubular / bulb E27 GALILEO L130703-M0035-PGALILEO L130703 MH70W c/w pole tubular / bulb E27 GALILEO L130703-M0070-PGALILEO L130703 HPS70W w/o pole tubular / bulb E27 GALILEO L130703-S0070GALILEO L130703 HPS70W c/w pole tubular / bulb E27 GALILEO L130703-S0070-P*M: Metal halide S: Sodium P: Pole
dimension
Galileo L130703
features
• elegance lighting system designed for discharge lamps. The system is designed for effi ciently illuminating the desired areas.
• corrosion resistant die-cast aluminium optical Canopy surface and mast mounting element coated in high-grade, weather resistant epoxy powder provide the superior quality fi nish for all weather conditions.
• the optical system used in conjunction with the transparent PMMA diff user version consists of an aluminium louver system providing glare control.
• poles are available in galvanised steel with primary powder coating for high corrosion resistance on request.
photometric curve
gned forsigned for
red areas.um opticalg elementtant epoxyy fi nish for
on with theconsists of ding glare
with primary resistance
base dimension
note : photometric result tested based on 6000lm HPS70w tube
Pg66-90_NIKKON 2016-outdoor architecture.indd 69Pg66-90_NIKKON 2016-outdoor architecture.indd 69 4/25/17 3:07 PM4/25/17 3:07 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
70
application
• residential areas• commercial areas• parks• city centers• car parks• garden• pedestrian precincts
technical data
input voltage• 220 - 240Vac lamp type• HID lamp wattage• 70W - 150W (250W is available upon request) lamp holder• E27 / E40 spigot size• ø76mm insulation class• class 1 ingress protection• IP54 maximum weight• 10.5 kg (complete with gear but without pole)
model lamp type lamp holder order code
GALILEO L130704 MH70W w/o pole tubular / bulb E27 GALILEO L130704-M0070GALILEO L130704 MH150W w/o pole tubular / bulb E27 GALILEO L130704-M0150GALILEO L130704 MH70W c/w pole tubular / bulb E27 GALILEO L130704-M0070-PGALILEO L130704 MH150W c/w pole tubular / bulb E27 GALILEO L130704-M0150-PGALILEO L130704 HPS70W w/o pole tubular / bulb E27 GALILEO L130704-S0070GALILEO L130704 HPS150W w/o pole tubular / bulb E27 / E40 GALILEO L130704-S0150GALILEO L130704 HPS70W c/w pole tubular / bulb E27 GALILEO L130704-S0070-PGALILEO L130704 HPS150W c/w pole tubular / bulb E27 / E40 GALILEO L130704-S0150-P*M: Metal halide S: Sodium P: Pole
dimension
order code
Galileo L130704
features
• elegance lighting system designed for discharge lamps. The system is designed for efficiently illuminating the desired areas.
• corrosion resistant die-cast aluminium optical housing with weather resistant epoxy powder coating and stainless steel screws to provide the superior quality fi nish for all weather conditions.
• poles are available in galvanised steel with primary powder coating for high corrosion resistance on request.
)
t without pole)
d for discharge for efficiently
minium optical epoxy powder to provide the her conditions.ed steel with gh corrosion
photometric curve
base dimensionnote : photometric result tested based on 6000lm HPS70w tube
Pg66-90_NIKKON 2016-outdoor architecture.indd 70Pg66-90_NIKKON 2016-outdoor architecture.indd 70 4/25/17 3:03 PM4/25/17 3:03 PM
Pg66-90_NIKKON 2016-outdoor architecture.indd 71Pg66-90_NIKKON 2016-outdoor architecture.indd 71 4/25/17 3:06 PM4/25/17 3:06 PM
72
BRENTANO & ANGLO
Pg66-90_NIKKON 2016-outdoor architecture.indd 72Pg66-90_NIKKON 2016-outdoor architecture.indd 72 4/25/17 3:03 PM4/25/17 3:03 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
73
order code
model lamp type lamp holder order code BRENTANO B140804 energy saving E27 BRENTANO B140804 lamp PLCE 18-26W
dimension photometric curve
application
• gardens• residential areas• driveways• hotel premises• parks• cycle tracks
technical data
input voltage• 220 - 240Vac lamp type• energy saving lamp wattage• PLCE 18-26W lamp holder• E27 insulation class• class 1 ingress protection• IP55 maximum weight• 7.2 kg
features
• elegance lighting system designed for energy saving lamps. These architecturally designed bollards are providing a pleasant light distribution.
• corrosion resistant die-cast aluminium optical housing with weather resistant epoxy powder coating and stainless steel screws to provide the superior quality fi nish for all weather conditions.
550
230
160
4-Ø12
160
note : photometric result tested based on PLCE 24w lamp
Brentano B140804
Pg66-90_NIKKON 2016-outdoor architecture.indd 73Pg66-90_NIKKON 2016-outdoor architecture.indd 73 4/25/17 3:06 PM4/25/17 3:06 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
74
order code
model lamp type lamp holder order code
BRENTANO B140805 MH 70W tubular / bulb E27 BRENTANO B140805-M0070BRENTANO B140805 HPS 70W tubular / bulb E27 BRENTANO B140805-S0070
*M: Metal halide S: Sodium
dimension photometric curve
Brentano B140805
application
• gardens• residential areas• walkways• hotel premises• parks• cycle tracks
technical data
input voltage• 220 - 240Vac lamp type• HID lamp wattage• 70W lamp holder• E27 insulation class• class 1 ingress protection• IP55 maximum weight• 13.8 kg (complete with gear)
features
• elegance lighting system designed for discharge lamps. The system is designed for effi ciently illuminating the desired areas.
• corrosion resistant die-cast aluminium optical housing with weather resistant epoxy powder coating and stainless steel screws to provide the superior quality fi nish for all weather conditions.
• closed by milk-white UV-stabilized PMMA diff user polycarbonate providing rotationally symmetrical light distribution with glare free lighting.
note : photometric result tested based on 6000lm MH70w bulb
Pg66-90_NIKKON 2016-outdoor architecture.indd 74Pg66-90_NIKKON 2016-outdoor architecture.indd 74 4/25/17 3:04 PM4/25/17 3:04 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
75
order code
model lamp type lamp holder carton dimension (L x W x H) mm order code
ANGLO P110402 Halogen MR16 max. 50W GU10 110 x 135 x 185 ANGLO P110402 Halogen / LED LED MR16 3W-6WANGLO P110403 Halogen MR16 max. 50W GU10 110 x 135 x 185 ANGLO P110403 Halogen / LED LED MR16 3W-6W
Anglo P110402 & P110403 [ with glare shield ]
application
• gardens• residential areas• resorts• hotel premises• parks• bushes
technical data
input voltage• 220 - 240Vac lamp type• MR16 Halogen lamp & MR16 LED lamp
(available upon request) wattage• max. 50W lamp holder• GU10 insulation class• class 1 ingress protection• IP65 maximum weight• 0.65 kg (P110402)• 1.2 kg (P110403)
dimension photometric curve
P110403
P110402features
• a portable garden light ground spike symmetrical light distribution with full shielded light source providing glare free.
• extruded aluminium column. Die- cast aluminium housing with high corrosion resistance. Stainless steel screws. Durable silicone rubber gasket. Clear tempered glass visor. Epoxy Powder paint with high corrosion resistance and protection.
• this popular garden spike spotlight offers a comprehensive range of lighting options. The small unobtrusive exterior fi tting off ers complete vertical & horizontal adjustment and has been designed to operate with GU10 Halogen lamps or GU10 LED lamps.
100
100 136
525
100 136
P110402 P110403
note : photometric result tested based on 50w MR16 Halogen lamp
Pg66-90_NIKKON 2016-outdoor architecture.indd 75Pg66-90_NIKKON 2016-outdoor architecture.indd 75 4/25/17 3:06 PM4/25/17 3:06 PM
76
HORECA, CAVALRY & FAGON
Pg66-90_NIKKON 2016-outdoor architecture.indd 76Pg66-90_NIKKON 2016-outdoor architecture.indd 76 4/25/17 3:04 PM4/25/17 3:04 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
77
order code
model lamp type lamp holder carton dimension (L x W x H) mm order code
HORECA W100101 MH70W double ended Rx7S 190 x 190 x 375 HORECA W100101-M0070HORECA W100101 MH150W double ended Rx7S 190 x 190 x 375 HORECA W100101-M0150HORECA W100101 HPS70W double ended Rx7S 190 x 190 x 375 HORECA W100101-S0070HORECA W100101 HPS150W double ended Rx7S 190 x 190 x 375 HORECA W100101-S0150
*M: Metal halide S: Sodium
application
• historical buildings• churches• theatres• museums• passageways• corridors areas• exhibitions halls
technical data
input voltage• 220 - 240Vac lamp type• double ended HID lamp wattage• 70W - 150W lamp holder• 1 x Rx7S insulation class• class 1 ingress protection• IP65 maximum weight• 5.5 kg (complete with gear)
dimension
features
• surface washers with effi cient up down light distribution for discharge lamps providing direct illumination which suitable for the in-depth illumination of surfaces for the purposes of visual continuity & highlighting
the areas.• these new designed wall recessed luminaires are technically & decoratively
developed with a high ingress protection IP65 particularly in corrosive environmental conditions.
• body component are constructed from corrosion resistant die-cast aluminium and coating with weather-resistant epoxy powder. Heat resistant toughened tempered glass cover.
photometric curve
365
177
180
note : photometric result tested based on 12500lm MH150w Rx7S
Horeca W100101
Pg66-90_NIKKON 2016-outdoor architecture.indd 77Pg66-90_NIKKON 2016-outdoor architecture.indd 77 4/25/17 3:06 PM4/25/17 3:06 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
78
application
• architectural structures• condominiums• theatres• museums• corridors areas• exhibitions halls
technical data
input voltage• 220 - 240Vac lamp type• 2 x HID lamp wattage• 35W lamp holder• 2 x G12 insulation class• class 1 ingress protection• IP65 maximum weight• 7.5 kg (complete with gear)
order code
model lamp type lamp holder carton dimension (L x W x H) mm order code
CAVALRY W100302 MH35W tubular G12 155 x 465 x 225 CAVALRY W100302-M0035
*M: Metal halide
dimension
features
• ideally designed to illuminate the wall and column on vertical surfaces with beam distribution upward and downward light source.
• high corrosion resistance die-cast and extrusion aluminium housing with clear heat resistant tempered glass.
• stainless steel screws and durable silicone rubber gasket to enhance the ingress protection of the luminaire against all weather conditions.
• two pieces anodised high purity aluminium reflector design for two directional’s up and down light distribution use two lamps.
photometric curve
Cavalry W100302
148
510 221
note : photometric result tested based on 2x 3500lm MH35w tube
Pg66-90_NIKKON 2016-outdoor architecture.indd 78Pg66-90_NIKKON 2016-outdoor architecture.indd 78 4/25/17 3:04 PM4/25/17 3:04 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
79
order code
model lamp type lamp holder carton dimension (L x W x H) mm order code
CAVALRY W100301 PLCE E27 155 x 350 x 225 CAVALRY W100301
Cavalry W100301
application
• architectural structures• condominiums• theatres• museums• corridors areas• exhibitions halls
technical data
input voltage• 220 - 240Vac lamp type• 2 x PLCE lamp wattage• max 100W lamp holder• 2 x E27 insulation class• class 1 ingress protection• IP65 maximum weight• 6.5 kg
dimension
features
• ideally designed to illuminate the wall and column on vertical surfaces with beam distribution upward and downward light source.
• high corrosion resistance die-cast and extrusion aluminium housing with clear heat resistant tempered glass.
• stainless steel screws and durable silicone rubber gasket to enhance the ingress protection of the luminaire against all weather conditions.
• anodised high purity aluminium refl ector design for two directional’s up and down light distribution use two lamps.
photometric curve
148
341 221
note : photometric result tested based on 2x 100w PAR30 Halogen E27
Pg66-90_NIKKON 2016-outdoor architecture.indd 79Pg66-90_NIKKON 2016-outdoor architecture.indd 79 4/25/17 3:06 PM4/25/17 3:06 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
80
order code
model lamp type lamp holder carton dimension (L x W x H) mm order code
FAGON W100501 PLC18W PLC18W G24d-3 135 x 130 x 280 FAGON W100501-PLC0018FAGON W100501 PLC26W PLC26W G24d-3 135 x 130 x 280 FAGON W100501-PLC0026
Fagon W100501 [ Recessed mounted ]
application
• historical buildings• churches• theatres• museums• passageways• corridors areas• exhibitions halls
technical data
input voltage• 220 - 240Vac lamp type• PLC lamp wattage• max. 26W lamp holder• G24D-3 insulation class• class 1 ingress protection• IP44 maximum weight• 1.5 kg (complete with gear)
dimension
features
• this wall recessed unit provides the most pleasing and even light distribution which facilitates safe pedestrian traffi c amongst walkways and stairways by creating visual continuity and highlighting the walkways.• the energy saving bulb have signifi cantly reduced the power consumption
of the luminaires thus reducing the heat generated and the associated running costs.
• corrosion resistant die-cast aluminium body and frosted glass lens.
photometric curve
265
120
107
note : photometric result tested based on 1800lm PLC26w
Pg66-90_NIKKON 2016-outdoor architecture.indd 80Pg66-90_NIKKON 2016-outdoor architecture.indd 80 4/25/17 3:04 PM4/25/17 3:04 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
81
application
• historical buildings• churches• theatres• museums• passageways• corridors areas• exhibitions halls
technical data
input voltage• 220 - 240Vac lamp type• PLC lamp wattage• max. 26W lamp holder• G24D-3 insulation class• class 1 ingress protection• IP44 maximum weight• 1.7 kg (complete with gear)
order code
model lamp type lamp holder carton dimension (L x W x H) mm order code
FAGON W100502 PLC 18W PLC18W G24d-2 130 x 110 x 275 FAGON W100502-PLC0018FAGON W100502 PLC 26W PLC26W G24d-3 130 x 110 x 275 FAGON W100502-PLC0026
dimension
features
• this wall surface unit provides the most pleasing and even light distribution which facilitates safe pedestrian traffi c amongst walkways and stairways by creating visual continuity and highlighting the walkways.• the energy saving bulb have signifi cantly reduced the power consumption
of the luminaires thus reducing the heat generated and the associated running costs.
• corrosion resistant die-cast aluminium body and frosted glass lens.
photometric curve
Fagon W100502 [ Surface mounted ]
265
120
99
note : photometric result tested based on 1800lm PLC26w
Pg66-90_NIKKON 2016-outdoor architecture.indd 81Pg66-90_NIKKON 2016-outdoor architecture.indd 81 4/25/17 3:05 PM4/25/17 3:05 PM
note : Due to rapid change and continuous improvement in technology, all specifi cations are subject to change without prior notice to improve reliability, function or design in order to supply the best product possible.
82
order code
model lamp type lamp holder carton dimension (L x W x H) mm order code
FAGON W100503 PLC18W PLC18W G24d-2 120 x 275 x 260 FAGON W100503-PLC0018FAGON W100503 PLC26W PLC26W G24d-3 120 x 275 x 260 FAGON W100503-PLC0026
Fagon W100503 [ Recessed mounted ]
application
• historical buildings• churches• theatres• museums• passageways• corridors areas• exhibitions halls
technical data
input voltage• 220 - 240Vac lamp type• PLC lamp wattage• max. 26W lamp holder• G24D-3 insulation class• class 1 ingress protection• IP44 maximum weight• 3.2 kg (complete with gear)
dimension
features
• this wall washer unit provides the most pleasing and even light distribution which facilitates safe pedestrian traffi c amongst walkways and stairways by creating visual continuity and highlighting the walkways.• the energy saving bulb have signifi cantly reduced the power consumption
of the luminaires thus reducing the heat generated and the associated running costs.
• corrosion resistant die-cast aluminium body and frosted glass lens.
photometric curve
245 106
260
note : photometric result tested based on 1800lm PLC26w
Pg66-90_NIKKON 2016-outdoor architecture.indd 82Pg66-90_NIKKON 2016-outdoor architecture.indd 82 4/25/17 3:04 PM4/25/17 3:04 PM
Pg66-90_NIKKON 2016-outdoor architecture.indd 83Pg66-90_NIKKON 2016-outdoor architecture.indd 83 4/25/17 3:05 PM4/25/17 3:05 PM
84
TECHNICAL DATA
Pg66-90_NIKKON 2016-outdoor architecture.indd 84Pg66-90_NIKKON 2016-outdoor architecture.indd 84 4/25/17 3:04 PM4/25/17 3:04 PM
85
Lamp Selection
Pg66-90_NIKKON 2016-outdoor architecture.indd 85Pg66-90_NIKKON 2016-outdoor architecture.indd 85 4/25/17 3:05 PM4/25/17 3:05 PM
86
description
Lamps are subject to constant technical development and improvement. Therefore we expressly advise you to consult the latest technical data sheets
issued by the lamp manufacturers. This applies in particular to data relating to the burning position, operating current and starting characteristics of
the lamp manufacturers. We assume no liability for its completeness and validity. ]
Lamp Table
Halogen-lamps
Wattage (W) Socket Voltage (V) Half Peak Correlated colour Colour rendering Luminous Diameter Lenght Av.life
Value ( ˚ ) temperature (k) index (ra) fl ux (lm)
(mm)
(mm)
(h)
25 GY6.35 12 — 3000 100 500 12 44 4000
35 GY6.35 12 — 3000 100 900 12 44 4000
50 GY6.35 12 — 3000 100 1250 12 44 4000
10 G4 12 — 3000 100 130 9 33 4000
20 G4 12 — 3000 100 320 9 33 4000
35 GY6.35 12 — 3000 100 600 12 44 4000
50 GY6.35 12 — 3000 100 910 12 44 4000
75 GY6.35 12 — 3000 100 1450 12 44 4000
90 GY6.35 12 — 3000 100 1800 12 44 4000
150 B15d 240 — 2900 100 2500 18 86 2000
250 B15d 240 — 2900 100 4350 18 98 2000
300 R7s 240 — 3000 100 5300 12 114 2000
500 R7s 240 — 3000 100 9500 12 114 2000
1000 R7s 240 — 3000 100 22000 12 186 2000
Halogen-lamps
Wattage (W) Socket Voltage (V) Half Peak Correlated colour Colour rendering Luminous Diameter Lenght Av.life
Value ( ˚ ) temperature (k) index (ra) fl ux (lm)
(mm)
(mm)
(h)
20 GU4 12 10 3200 100 4800 35 37 4000
20 GU4 12 30 3200 100 800 35 37 4000
35 GU5.3 12 10 3000 100 12500 51 45 4000
35 GU5.3 12 24 3000 100 4400 51 45 4000
35 GU5.3 12 38 3000 100 2200 51 45 4000
35 GU5.3 12 60 3000 100 1100 51 45 4000
50 GU5.3 12 10 3000 100 15000 51 45 4000
50 GU5.3 12 24 3000 100 5700 51 45 4000
50 GU5.3 12 38 3000 100 2850 51 45 4000
50 GU5.3 12 60 3000 100 1430 51 45 4000
20 BA15d 12 8 3000 100 7700 70 50 3000
20 BA15d 12 24 3000 100 900 70 50 3000
50 BA15d 12 8 3000 100 12500 70 50 3000
50 BA15d 12 24 3000 100 2600 70 50 3000
Pg66-90_NIKKON 2016-outdoor architecture.indd 86Pg66-90_NIKKON 2016-outdoor architecture.indd 86 4/25/17 3:04 PM4/25/17 3:04 PM
87
Fluorescent - lamps
Wattage (W) Socket Voltage (V) Half Peak Correlated colour Colour rendering Luminous Diameter Lenght Av.life
Value ( ˚ ) temperature (k) index (ra) fl ux (lm)
(mm)
(mm)
(h)
24 G5 — — 3000 80...90 1750 — 549 20000
24 G5 — — 4000 80...90 1750 — 549 20000
54 G5 — — 3000 80...90 4450 — 1149 20000
54 G5 — — 4000 80...90 4450 — 1149 20000
Metal-halide-lamps / High pressure sodium lamps
Wattage (W) Socket Voltage (V) Half Peak Correlated colour Colour rendering Luminous Diameter Lenght Av.life
Value ( ˚ ) temperature (k) index (ra) fl ux (lm)
(mm)
(mm)
(h)
20 PGJ5 — — 3000 85 1615 17.3 52 4000
35 G8.5 — — 3000 81 3300 14 85 9000
35 G8.5 — — 4200 85 3200 14.5 85 6000
70 G8.5 — — 3000 83 6600 14 85 6000
70 G8.5 — — 4200 90 6000 14.5 85 6000
35 G12 — — 3000 81 3300 20 100 12000
70 G12 — — 3000 81 6600 20 100 12000
70 G12 — — 4200 92 6600 20 100 12000
150 G12 — — 3000 85 14000 20 110 12000
150 G12 — — 4200 96 12700 20 110 9000
250 G12 — — 3000 89 23000 20 135 11000
250 E40 — — 4500 65 19000 47 257 —
400 E40 — — 4200 65 35000 47 286 —
150 RX7s-24 — — 3000 88 13250 24 135.4 16000
150 RX7s-24 — — 4200 96 14200 24 135.4 16000
250 Fc2 — — 3000 80 20000 25 63 6000
250 Fc2 — — 4200 85 20000 25 63 6000
400 Fc2 — — 5600 85 28000 31 206 6000
250 E40 — — 2000 — 33000 46 257 —
400 E40 — — 2000 — 55000 46 285 —
Compact fl uorescent-lamps
Wattage (W) Socket Voltage (V) Half Peak Correlated colour Colour rendering Luminous Diameter Lenght Av.life
Value ( ˚ ) temperature (k) index (ra) fl ux (lm)
(mm)
(mm)
(h)
18 GX24d-2 — — 2700 85 1200 — 116 10000
18 GX24d-2 — — 3000 85 1200 — 116 10000
18 GX24d-2 — — 4000 85 1200 — 116 10000
26 GX24d-3 — — 2700 85 1800 — 131 10000
26 GX24d-3 — — 3000 85 1800 — 131 10000
26 GX24d-3 — — 4000 85 1800 — 131 10000
32 GX24d-3 — — 2700 85 2400 — 147 10000
32 GX24d-3 — — 3000 85 2400 — 147 10000
32 GX24d-3 — — 4000 85 2400 — 147 10000
42 GX24d-4 — — 2700 85 3200 — 168 10000
42 GX24d-4 — — 3000 85 3200 — 168 10000
42 GX24d-4 — — 4000 85 3200 — 168 10000
Pg66-90_NIKKON 2016-outdoor architecture.indd 87Pg66-90_NIKKON 2016-outdoor architecture.indd 87 4/25/17 3:05 PM4/25/17 3:05 PM
88
Floodlight Applications
Pg66-90_NIKKON 2016-outdoor architecture.indd 88Pg66-90_NIKKON 2016-outdoor architecture.indd 88 4/25/17 3:05 PM4/25/17 3:05 PM
89
Floodlight Calculations
Pg66-90_NIKKON 2016-outdoor architecture.indd 89Pg66-90_NIKKON 2016-outdoor architecture.indd 89 4/25/17 3:05 PM4/25/17 3:05 PM
90
International
ISO 9001:2008 Quality Management System Standards certifi ed by Bureau Veritas Certifi cation (BVC) for design, development and manufacture of HID ballast, ignitor, industrial lightings and LED lightings, low voltage transformer and current transformer since 2004.Certifi cate of Type Test by ASTA Certifi cate Services (2002) CE Marking on products for street lantern, ballast, ignitor, isolating transformer andcurrent transformers (2005)
Domestic
ISO 9001:2008 Quality Management System since 1998SIRIM Product Type Test Certification for ballast, ignitor, street lighting and floodlights (1998) JKR approval of products for ballast and ignitor (2005), street lighting (2006) TNB approval on products for ballast and ignitor (2006) Superbrands status (2006)
Accreditations & Certifi cations
CE marking for ignitor
JKR Approval
CE marking for ballast
TNB Approval
ISO9001 : 2008 BV
ISO9001 : 2008 Standard Malaysia
CE marking foe street lantern
Sirim Certifi cate
For LED products & Transformer products information, kindly refer to www.success.com.my or email to [email protected]
Pg66-90_NIKKON 2016-outdoor architecture.indd 90Pg66-90_NIKKON 2016-outdoor architecture.indd 90 4/25/17 3:05 PM4/25/17 3:05 PM