STREET LIGHTING

+44 (0)121 457 6340 // www.nvcuk.com NVC GENERAL LIGHTING ISSUE 03 // 185

STREET LIGHTING

RYDER LED street lights on the concourse outside Birmingham New Street station, UK. Installed by NG Bailey.

+44 (0)121 457 6340 // www.nvcuk.com186 // NVC GENERAL LIGHTING ISSUE 03

POST TOP LIGHTING

POST TOP LIGHTING

FRASERPAGE 189

JASPERPAGE 188

BIRKDALEPAGE 191

ROCKYPAGE 190

LYTHAMPAGE 192

EDMONTONPAGE 193

HID


POST TOP LIGHTING


POST TOP LIGHTING

APPLICATIONS

- Parks and gardens

- Urban amenity areas

- The light distribution of JASPER

casts a circular pool of light on

the ground suitable for general

amenity lighting

CONSTRUCTION

- Die-cast aluminium body and base

- Polycarbonate controller

- Aluminium internal reflector

- Weight: 7.0kg

- Windage: 0.34m2

TECHNICAL DETAILS

- 50W, 2,150 lm, 43 l.lm/c.W

- CRI >70

- CCT 4000K

- Cree COB LED

- Leading brand driver

OPTIONS

PHOTO-CELL A photo-cell is not available

on this product.

JASPERIP65 rated decorative LED post top fitting

ORDER CODE DESCRIPTION

NJS50/LED/740 JASPER 50W LED POST TOP

5 5 33 2


POST TOP LIGHTING

APPLICATIONS

- Parks and gardens


- The light distribution of FRASER

casts a circular pool of light on

the ground suitable for general

amenity lighting

CONSTRUCTION

- Die-cast aluminum cover and base

- Polycarbonate controller

- Driver and COB LED unmounted on

internal steel gear tray with

extruded aluminium heat sink

- Weight: 7.0kg

- Windage: 0.28m2

TECHNICAL DETAILS

- 50W, 3,200 lm, 64 l.lm/c.W

- CRI >70

- CCT 4000K

- Cree COB LED


OPTIONS

PHOTO-CELL Dusk/dawn photo-cell

available. Add suffix PEC.

FRASERIP65 rated decorative

LED post top fitting


NFA50/LED/740 FRASER 50W LED POST TOP

5 5 33 2


POST TOP LIGHTING

5 5 33 2

APPLICATIONS

- Parks and gardens


- The light distribution of ROCKY is

identical to our RYDER and PORTRUSH

road lantern ranges, distributing its light

suitably for paths and minor roads.

For example, ROCKY 40W provides an

S4 compliant installation as follows:

- 30m spacing, one side only

- 6m columns

- 9m roadway

- 0.85 maintenance factor

CONSTRUCTION

- Die-cast aluminium body, pre-treated for

corrosion resistance

- Powder coated finish to RAL9005

- Tool-free access to driver compartment

for easy maintenance

- Body supported on die-cast

aluminium arms

- Supplied complete with body and

die-cast aluminium support arms,

as shown

- Weight: 14.5kg

- Windage: 0.25m2

TECHNICAL DETAILS

- Available in three wattages:

• 30W nom., 33W act., 3,000 lm,

91 l.lm/c.W

• 40W nom., 43W act., 3,780 lm,

88 l.lm/c.W

• 60W nom., 63W act., 5,340 lm,

85 l.lm/c.W

- CRI >70

- CCT 4000K

- Cree LEDs with acrylic lenses


OPTIONS


on this product.

ROCKYIP65 rated decorative LED post top fitting


NRO30/LED/740 ROCKY 30W LED ROAD LANTERN




POST TOP LIGHTING

5 5 33 2

BIRKDALEIP65 rated decorative pendant

LED post top lantern


NBD30/LED/740 BIRKDALE 30W LED ROAD LANTERN



ACCESSORIES

NBD/PTB/60/1 BIRKDALE/LYTHAM POST TOP BRACKET 60MM 1 ARM




SINGLE BRACKET TWIN BRACKET

APPLICATIONS

- Amenity areas, parks and gardens

- Minor roads

- Paths

- Car parks

- For example, BIRKDALE 40W provides

an S4 compliant installation as follows:

- 30m spacing, one side only

- 6m columns

- 9m roadway

- 0.85 maintenance factor

CONSTRUCTION

- Die-cast aluminium body, pre-treated for



- Tool-free access to driver compartment

for easy maintenance

- Weight: 10.5kg (excluding arms)

- Windage: 0.25m2

TECHNICAL DETAILS

- Available in three wattages:

• 30W nom., 33W act., 3,000 lm,

91 l.lm/c.W

• 40W nom., 43W act., 3,780 lm,

88 l.lm/c.W

• 60W nom., 63W act., 5,340 lm,

85 l.lm/c.W

- CRI >70

- CCT 4000K

- Cree LEDs with acrylic lenses


OPTIONSPENDANT MOUNTING BRACKETS

Choice of 60mm or 76mm, single or twin, as

listed below. To be ordered as separate items.


on this product.


POST TOP LIGHTING

5 5 33 2

APPLICATIONS

- Amenity areas, parks and gardens

- Paths

- Car parks

CONSTRUCTION- Die-cast aluminium body, pre-treated for



- For pendant mounting on 60-76mm post

top. Special pendant mounting brackets

required, as listed below.

- Weight: 6.5kg (excluding arms)

- Windage: 0.25m2

TECHNICAL DETAILS

- 50W nom., 58W act., 3,910 lm,

67 l.lm/c.W

- CRI >70

- CCT 4000K

- Cree COB LED with acrylic lens

- Meanwell driver

OPTIONS

PENDANT MOUNTING BRACKETS Choice

of 60mm or 76mm, single or twin, as listed

below. To be ordered as separate items.


on this product.

LYTHAMIP65 rated decorative pendant COB LED post top lantern


NLY50/LED/740 LYTHAM 50W LED ROAD LANTERN

ACCESSORIES





SINGLE BRACKET TWIN BRACKET


POST TOP LIGHTING

APPLICATIONS

- Parks and gardens


CONSTRUCTION

- Ordered and supplied as two items:

• Gallery assembly, comprised of louvre,

lamp holder, gear compartment and - SON

& HQI versions only – magnetic gear and

lamp. Gear is supplied for remote mounting

on 150W versions.

• Polycarbonate globe. Clear with black

top, as pictured, in a choice of two sizes,

450mm and 500mm diameter.

- Also available with no gear and an E27

lamp holder, suitable for use with LED

lamps. Supplied excluding lamp.

- Weight:

• 70W, 4.5kg

• 150W & E27, 2.7kg (gear remote on

150W version)

- Windage:

• 450mm, 0.16m2

• 500mm, 0.20m2

TECHNICAL DETAILS

- SON & HQI versions supplied complete

with lamp and magnetic gear

- Also available with no gear and an E27

lamp holder, suitable for use with LED

lamps, as listed below.

Supplied excluding lamp.

OPTIONS

GLOBE DIAMETER Choice of 450 or

500mm, as listed. Globes are clear with

a black top, as pictured.

SPIGOT DIAMETER Choice of 76mm

(as listed) or 60mm.

GALLERY ASSEMBLIES

GLOBES

EDMONTONIP54 polycarbonate globe post top

fitting for SON and HQI metal halide lamps


NED70SON-EI/GAS/76/220 EDMONTON 70W SON-EI GALLERY 76MM +220 LAMP

NED70HQI-E/GAS/76/740 EDMONTON 70W HQI-E GALLERY 76MM +740 LAMP

NED150HQI-E/GAS/76/740 EDMONTON 150W HQI-E GALLERY 76MM +740 LAMP

NED/E27/GAS/76 EDMONTON E27 GALLERY 76MM NO LAMP


NED/HE/450/PC/CL/BL EDMONTON HEAD POLY-C 450MM CLEAR BLACK TOP GLOBE

NED/E27/GAS/60 EDMONTON HEAD POLY-C 500MM CLEAR BLACK TOP GLOBE

HID


FLOOD LIGHTING

RANGERPAGE 214

NEW YORKPAGE 209

ODESSAPAGE 202

TIGERPAGE 200

PANTHERPAGE 198

SABREPAGE 196

PREDATORPAGE 207

ARIZONA PAGE 208

ORLANDOPAGE 204

TAMPAPAGE 206

SENATORPAGE 210

MANITOBAPAGE 216

FLYERPAGE 212

DENVERPAGE 205

FLOOD LIGHTING

HID HID

HID HID

HID HID

HID HID


FLOOD LIGHTING

WHICH LED FLOODLIGHTshould I use to replace my old high-intensity discharge floods?

This is a frequently asked question, and the chart below will help to answer it.

It ranks our LED and conventional (HID) floodlights in order

of lumen outputs so you can see easily which LED flood is the

closest equivalent to an existing HID flood.

Note that because of the very high rates of lumen depreciation

that occur with HID lamps we are comparing the output of our

LED fittings (whose lumen outputs are very stable over many

years) with the mid-life lumen output of the HID lamps, adjusted

by the LOR. We believe that this is a much fairer comparison

than comparing LED with the initial output of an HID lamp.

LED SOURCE: LED HID

LUMINAIRE OUTPUT, x 1,000 LUMENS

<1 1 2 3 4 5 6 7 8 9 10 20 30 40 50 100+

ORLANDOPAGE 204

10W 30W 50W

ODESSAPAGE 202

20W 30W 50W 60W 100W

SABREPAGE 196

20W 27W 36W

TAMPAPAGE 206 70W 150W

NEW YORKPAGE 209

70W 150W 250W 400W

DENVERPAGE 205 70W 140W

PANTHERPAGE 198

78W 100W 192W

ARIZONAPAGE 208 250W 400W

SENATORPAGE 210

1kW

MANITOBAPAGE 216 1kW

FLYERPAGE 212

1kW 2kW

TIGERPAGE 200 413W

RANGERPAGE 214

2kW


FLOOD LIGHTING

APPLICATIONS

- Building facades

- Airport, railway and

shopping centre interiors

CONSTRUCTION

- Die-cast aluminium body, RAL9006

- Galvanised steel mounting bracket,

painted to RAL9006

- LEDs on metal core PCB

- Pressure equalisation valve fitted

TECHNICAL DETAILS

- Available in 6 variants:

• 12 LEDs, 20W, 1,880 lm, 94 l.lm/c.W

• 12 LEDs, 27W, 2,250 lm, 83 l.lm/c.W

• 16 LEDs, 27W, 2,420 lm, 90 l.lm/c.W

• 20 LEDs, 33W, 2,960 lm, 90 l.lm/c.W

• 16 LEDs, 36W, 3,020 lm, 84 l.lm/c.W

• 20 LEDs, 45W, 3,700 lm, 82 l.lm/c.W

- Asymmetric distribution

- CCT 4000K

- Philips or similar brand LEDs and driver

- Weight & Windage:

• 12 LED, 3.95kg, 0.06m2

• 16 & 20 LED, 4.75kg, 0.08m2

OPTIONS

OPTICS The variants listed are with

asymmetric optics. Symmetric optics are

also available. Enquire for details.

ACCESSORIES SABRE is supplied as

standard complete with a steel mounting

bracket, as shown here. For mounting

accessories see opposite page for details.

SABREIP67 rated asymmetric LED floodlights


NSB20/LED/12/740 SABRE 20W LED GREY ASYMMETRIC FLOODLIGHT 12 LED






5 5 33 2

COMPLETE FITTINGSSABRE 12 LED SABRE 16 & 20 LED

SABRE 20 LEDSABRE 16 LEDSABRE 12 LED


FLOOD LIGHTING

ASYMMETRIC

DISTRIBUTION.

With the fitting mounted

horizontally the maximum

intensity is at 30° from

the vertical, providing an

ideal solution for building

facades and large interiors

such as railway termini,

airports and shopping

centres.

ASYMMETRIC OPTIC

made of white self-colour

polymer reflectors, UV and

high-temperature resistant.

HIGH-PURITY ALUMINIUM

HOUSING, pre-treated

and coated in polyester

powder for maximum

durability in all conditions.

RAL9006.

HIGH TRANSPARENCY,

4mm tempered glass.

MOUNTING BRACKET

made of galvanised steel,

painted to match the body.

RAL9006.


NSB/PTB/60/1 SABRE POST TOP BRACKET 60MM X1 FIX

=ORDER CODE DESCRIPTION


=



=

Easy to installSABRE can be wall mounted (fixing details opposite) or column mounted. For galvanised steel column mounting

brackets (providing a single-point fix) see page 220. Alternatively, for a specially neat finish we offer a range of post top

brackets designed for the SABRE, shown below:


FLOOD LIGHTING

APPLICATIONS

- Building facades

- Sports facilities

CONSTRUCTION



painted to RAL9006


- Pressure equalization valve fitted

TECHNICAL DETAILS

- Available in 4 wattages:

• 78W, 8,600lm, 110 l.lm/c.W

• 100W, 10,500lm, 105 l.lm/c.W

• 127W, 12,800lm, 101 l.lm/c.W

• 192W, 22,100 lm, 115 l.lm/c.W

- Choice of 6 asymmetric optics,

- CCT 4000K

- Philips LEDs and driver

- Weight & Windage:

• 78W, 11.3kg, 0.17m2

• 100W & 127W, 14.4kg, 0.20m2

• 192W, 15.0kg, 0.20m2

OPTIONS

OPTICS PANTHER is available with a

choice of asymmetric optics as follows:

• 78W, 100W & 127W available with peak

intensity at 35°, 45°, 55° or 60° from

vertical. 35° is listed below, for other

angles, replace 35 with 45, 55 or 60

as required.

• 192W available with peak intensity at

52° and a choice of narrow or wide

beam. Suffix /52/N or 52/W as

listed below.

ACCESSORIES PANTHER is supplied as

standard complete with a steel mounting

bracket, as shown here. For mounting

accessories see opposite for details.

PANTHERIP66 rated asymmetric LED floodlights.


NPN78/LED/35/740 PANTHER 78W LED GREY ASYM FLOOD 35 DEG OPTIC



NPN192/LED/52/N/740 PANTHER 192W LED GREY ASYM FLOOD 52 DEG NARROW OPTIC

NPN192/LED/52/W/740 PANTHER 192W LED GREY ASYM FLOOD 52 DEG WIDE OPTIC

5 5 33 2

COMPLETE FITTINGSPANTHER 78W PANTHER 100W, 127W & 192W

PANTHER 127W/192W

PANTHER 100W

PANTHER 78W


FLOOD LIGHTING

Choice of 4 optics for 78W, 100W & 127W variants

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

200

400600

8001000

1200

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

max 35˚

max 45˚

max 55˚

max 60˚

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

200

400600

8001000

1200

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

max 35˚

max 45˚

max 55˚

max 60˚

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

200

400600

8001000

1200

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

max 35˚

max 45˚

max 55˚

max 60˚

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

200

400600

8001000

1200

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

max 35˚

max 45˚

max 55˚

max 60˚

HIGH-PURITY ALUMINIUM

HOUSING, chromate

pre-treated and coated

in polyester powder for

maximum durability in all

conditions. RAL9006.

AUTOMATIC ELECTRICAL

isolation when the front

cover is opened.

ASYMMETRIC

DISTRIBUTION.

With the PANTHER

mounted horizontally the

maximum intensity may

be at 35°, 45°, 52°, 55°

or 60° from the vertical,

depending on the variant

ordered.

HIGH TRANSPARENCY,

4mm tempered glass.

ASYMMETRIC OPTIC UV and

high-temperature resistant.


NPN/PTB/60/1 PANTHER/PREDATOR POST TOP BRACKET 60MM X1 FIX



PANTHER35˚ASYMMETRIC




PANTHER52˚ asymmetric narrrow beam

PANTHER52˚asymmetric wide beam

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

200

400600

8001000

1200

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

max 35˚

max 45˚

max 55˚

max 60˚

max 52o

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

200

400600

8001000

1200

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

350

7001050

14001750

2100

max 35˚

max 45˚

max 55˚

max 60˚

max 52o

Choice of 2 optics for the 192W variant

IP68 CABLE

gland supplied

MOUNTING BRACKET

made of galvanised

steel, painted to match

the body. RAL9006.

Easy to installPANTHER can be wall mounted (fixing details opposite) or

column mounted. For galvanised steel column mounting

brackets (providing a single-point fix) see page 220

Alternatively, for a specially neat finish we offer a range

of post top brackets designed for the PANTHER,

shown below:


FLOOD LIGHTING

APPLICATIONS

- Sports facilities, including those used for

HD televised events

- Large industrial sites

- Docks and container terminals

- Railway yards & airports

CONSTRUCTION

- Die-cast aluminium body painted to

RAL9006

- Heavy duty galvanised steel mounting

bracket

- Weight 25Kg, windage 0.22m2

TECHNICAL DETAILS

- 413W, 42 LEDs, up to 50,400 lm,

122 l.lm/c.W


- Choice of 4 optics: narrow, semi-narrow,

semi-wide and wide beam.

- CCT 5000K, CRI>70

- 35°C maximum rated ambient temperature

- Photobiological risk: Exempt according

to EN62471

- Up to 10kV surge protection in common

& differential modes

- Programmable driver

OPTIONS

OPTICS Choice of 4:

• Narrow beam, suffix N

• Semi-narrow beam, suffix SN

• Semi-wide beam, suffix SW

• Wide beam, suffix W

Anti-glare louvre available to be

ordered as a separate item.

TIGERHigh-output asymmetric LED floodlight to replace conventional 1,000W floods


NTG413/LED/N/750 TIGER 413W LED GREY ASYM FLDLIGHT NARROW OPTIC

NTG413/LED/SN/750 TIGER 413W LED GREY ASYM FLDLIGHT SEMI-NARROW OPTIC

NTG413/LED/SW/750 TIGER 413W LED GREY ASYM FLDLIGHT SEMI-WIDE BEAM OPTIC

NTG413/LED/W/750 TIGER 413W LED GREY ASYM FLDLIGHT WIDE BEAM OPTIC

ACCESSORIES

NTG/LOUVRE TIGER ANTI-GLARE LOUVRE SILVER

TIGER 413W

5 5 33 2

ANTI-GLARE LOUVRE AVAILABLE TO BE ORDERED AS A SEPARATE ITEM


FLOOD LIGHTING

DIE-CAST ALUMINIUM

BODY with low copper

content for maximum

corrosion resistance.

MOUNTING BRACKET

Mounting bracket resistance

made of galvanised steel,

painted to match the body.

RAL9006.

ANTI-AGING rubber

gasket for long-term

reliability.

FINS on the rear for

efficient heat dissipation.IP68 cable gland supplied.

POLYESTER POWDER

COATING RAL9006,

for all-weather performance.

HIGH TRANSPARENCY,

5mm tempered glass.

CHOICE OF 4 OPTICS

(reflectors) for precise control

of light distribution.

Mounting bracket Gear box Optics - Choice of 4 available

TIGER is available with a choice of 4 optics:


FLOOD LIGHTING

5 5 33 2

AVAILABLE IN WHITE

100W

PIR VERSIONS SUPPLIED WITH REMOTE CONTROL

APPLICATIONS

- Security lighting

- Building perimeters & approaches

CONSTRUCTION

- Die-cast aluminium body with fine

textured paint finish

- Front cover secured with stainless steel

socket-head screws

- 3mm toughened glass front cover

- Pre-wired with 1m of H05RN-F 3x1.0mm

flex

TECHNICAL DETAILS

- COB LED light source

- Available in 6 wattages:

• 10W nom., 10.3W act.,

950 lm, 92 l.lm/c.W

• 20W nom., 20.2W act.,

2,200 lm, 109 l.lm/c.W

• 30W nom., 31.4W act.,

3,080 lm, 98 l.lm/c.W

• 50W nom., 52.9W act.,

5,300 lm, 100 l.lm/c.W

• 60W nom., 57W act.,

6,910 lm, 121 l.lm/c.W

• 100W nom., 116W act.,

12,460 lm, 107 l.lm/c.W

- CRI >80

- CCT 4000K

- Weight & Windage:

• 10W, 0.5Kg, 0.02m2

• 20W, 0.9Kg, 0.03m2

• 30W, 1.2Kg, 0.04m2

• 50W, 2.8Kg, 0.07m2

• 100W, 5.0Kg, 0.15m2

OPTIONS

BLACK OR WHITE Available with black

painted body (as listed). For white painted

body, replace BK with WH when ordering.

PIR Available with PIR fitted on 10, 20,

30 & 50W versions only. Suffix /PIR to

order. PIR versions supplied complete with

remote control for manual override on/

off and to adjust time delay, sensitivity

(distance) and lux (light & dark operation).

ODESSAIP65 rated LED floodlights in a slim die-cast aluminium housing


NOD10/BK/840 ODESSA 10W LED FLOODLIGHT BLACK COL840






NOD10/BK/PIR/840 ODESSA 10W LED FLOODLIGHT BLACK +PIR COL840




SPARES

NOD/HS/PIR ODESSA REMOTE HANDSET FOR PIR P0PIRWG00000


FLOOD LIGHTING

CHOICE of black or white.

PIR CONTROL

- ON/Manual override. Turns the floodlight on without any PIR control.

Handy for illuminating the barbecue or for any other tasks where continuous light is required.

- ON/PIR sensor. Puts the fitting under PIR control. When motion is detected it will turn on.

When no further motion is detected it will switch off after the time-out period has elapsed.

This is the factory default mode.

OVERRIDE OFF Turns the fitting off.

LUX SENSING

- Day Mode - the light will always switch on when presence is detected.

- Dusk Mode - the light will only come on when presence is detected AND the ambient light

level is <60 lux.

SENSITIVITY There are two settings:

- Near distance - only switches on if movement is detected close to the fitting.

- Far distance - switches on in response to movement close or further from the fitting.

TIME-OUT PERIOD If the light is on because it has been triggered by the sensor it will stay on

for the time-out period and then switch off if no further movement is detected. There are 8

time-out periods to choose between.

With all the settings the fitting will acknowledge receipt of a command from the hand-held

remote control by flashing once.

OPTIONAL BUILT-IN PIR.

Neat, tidy and protected

from dirt and impact.

Available on 10, 20, 30,

& 50W versions.

Range up to 8m.

STAINLESS-STEEL

cable gland.

ADJUSTABLE MOUNTING

BRACKET with stainless-steel

fixings.

NOD100/BK/840

NOD30/WH/PIR/840

SLIM PROFILE


FLOOD LIGHTING

CLOSE-UP OF PIR

5 5 33 2

APPLICATIONS

- Security lighting

- Building perimeters

- Domestic drives and porches

CONSTRUCTION


- Toughened glass cover, lightly frosted

TECHNICAL DETAILS

- COB LED light source

- 3 sizes available. See table.

- CRI>70

- CCT 4000K

- Symmetric light distribution

- Weight and windage:

• 10W, 0.9kg, 0.03m2

• 30W, 2.3kg, 0.07m2

• 50W, 4.1kg, 0.11m2

OPTIONS

PIR 10W & 30W versions available with

PIR occupancy sensor fitted. Add suffix

PIR. Versions with PIR have adjustable

time delay and a night setting to prevent

switching during daylight.

ORLANDOIP65 rated LED floodlights in a slim die-cast aluminium housing


NOL/10/LED/740 ORLANDO 10W LED FLOODLIGHT

NOL/30/LED/740 ORLANDO 30W LED FLOODLIGHT

NOL/50/LED/740 ORLANDO 50W LED FLOODLIGHT50W FIXING


FLOOD LIGHTING

APPLICATIONS

- Industry and warehouses

- General purpose floodlighting

- Suitable for use to -40oC

CONSTRUCTION

- Aluminium extruded body with die-cast

end caps and breather valve

- Toughened glass cover removable

for maintenance

- Pre-wired with 10m of 3 x 1.5mm HO7 flex

TECHNICAL DETAILS

- Two versions available:

• 70W nom., 72W act., 6,822 lm,

95 l.lm/c.W

• 140W nom., 146W act., 13,570 lm,

93 l.lm/c.W

- Brideglux COB LED

- Driver includes dynamic thermal

control, reducing the forward current if

the temperature rises above a threshold

that would threaten the life of the driver

or LEDs.

- Symmetric light distribution


• 70W, 7.40kg, 0.11m2

• 140W, 11.2kg, 0.16m2

OPTIONS

VOLTAGE Versions of this product

running at 24V DC and 110-240V DC

(including a larger 200W version) are

available. Please ask for details.

EXTRAS. Large stirrup bracket for

post-top applications available, listed

below. For mounting accessories,

see page 220.

DENVERIP65 aluminium 70W and 140W

LED floodlight fittings

5 5 33 2

STIRRUP BRACKET FOR POST-TOP MOUNTING


NDN6300/LED/757 DENVER 6822 LUMEN 70W LED FLOODLIGHT IP65

NDN12600/LED/757 DENVER 13,570 LUMEN 140W LED FLOODLIGHT IP65

ATTACHMENTS

NDN6300/BRKT/POST-TOP DENVER 6822 LUMEN 70W POST TOP MOUNTING BRACKET

NDN12600/BRKT/POST-TOP DENVER 13,570 LUMEN 140W POST TOP MOUNTING BRACKET


FLOOD LIGHTING

AVAILABLE IN 3 COLOURSGREY, BLACK AND WHITE

APPLICATIONS

- Fascias

CONSTRUCTION

- Aluminium die-cast body and cover

- Available in a choice of 3 light

textured colours:

• Matt grey, as standard

• Matt white (WH)

• Matt black (BK)

- Hinged single-piece cover retained on

stainless steel screws

- Polished aluminium reflector with

dimpled finish

TECHNICAL DETAILS

- 70W and 150W Metal Halide double

ended lamp

- Supplied complete with leading

brand colour 740 lamp



• 70W, 3.35kg, 0.08m2

• 150W, 4.35kg, 0.08m2

OPTIONS

EXTRAS For mounting accessories,

see page 220.

TAMPAIP65 slim aluminium diecast asymmetric floodlights for 70W & 150W metal halide lamps


NTA70HQI-DE/740 TAMPA 70W MH GREY SLIM ALU FLOOD + LAMP

NTA150HQI-DE/740 TAMPA 150W MH GREY SLIM ALU FLOOD + LAMP

NTA70HQI-DE/WH/740 TAMPA 70W MH WHITE SLIM ALU FLOOD + LAMP

NTA150HQI-DE/WH/740 TAMPA 150W MH WHITE SLIM ALU FLOOD + LAMP

NTA70HQI-DE/BK/740 TAMPA 70W MH BLACK SLIM ALU FLOOD + LAMP

NTA150HQI-DE/BK/740 TAMPA 150W MH BLACK SLIM ALU FLOOD + LAMP

HID


FLOOD LIGHTING

SINGLE POST TOP BRACKET

TWIN POST TOP BRACKET

APPLICATIONS

- Building facades

- Sports grounds

CONSTRUCTION

- For 250W and 400W metal halide

and sodium tubular lamps.

Supplied complete with lamp.

- Magnetic gear


TECHNICAL DETAILS

- High-purity die-cast aluminium body,

chromate pre-treated and polyester

powder coated paint to RAL9006


paint finished to RAL9006.

- E40 porcelain lamp holder

- Pressure equalization valve fitted

- Supplied with IP68 cable gland

- Weight: 250W - 13.35kg 400W - 14.55kg

- Windage: 0.20m2

OPTIONS

OPTICS Variants listed are with

asymmetric wide-beam reflector.

Other reflectors are available.

Enquire for details.

ACCESSORIES PREDATOR is supplied

as standard complete with a steel

mounting bracket, as shown here.

For galvanised steel mounting accessories

see pages 220. Alternatively, for a superior

finish, we offer single and twin post top

brackets specifically designed for the

PANTHER & PREDATOR ranges,

listed below, for details see page 199.

PREDATORIP66 rated asymmetric

HID floodlight


NPD250SON-T/220 PREDATOR 250W SON-T GREY ASYMMETRIC FLOODLIGHT +220 LAMP

NPD400SON-T/220 PREDATOR 400W SON-T GREY ASYMMETRIC FLOODLIGHT +220 LAMP

NPD250HQI-T/740 PREDATOR 250W HQI-T GREY ASYMMETRIC FLOODLIGHT +740 LAMP

NPD400HQI-T/740 PREDATOR 400W HQI-T GREY ASYMMETRIC FLOODLIGHT +740 LAMP




COMPLETE FITTINGS

MOUNTING ACCESSORIES

HID


FLOOD LIGHTING

ARIZONAIP65 aluminium diecast symmetric flood for 150-400W HID lamps

420147

515

245

WITH PCCOVERFITTED

405

34 x 10OBR SLOTØ10

Ø20

100100

STIRRUP FIXING DETAILS

420147

515

245

WITH PCCOVERFITTED

405

34 x 10OBR SLOTØ10

Ø20

100100

STIRRUP FIXING DETAILS

AVAILABLE IN 2 COLOURS, BLACK AND WHITE

APPLICATIONS

- Area floodlighting

- Industrial premises

- Warehousing

CONSTRUCTION

- Aluminium die-cast body.

- Available in a choice of two light

textured colours.

• Matt black – as listed

• Matt white – add suffix WH

- Polished aluminium reflector

with dimpled finish

TECHNICAL DETAILS

- SON-T 150W, 250W and 400W

- HQI-T 250W and 400W

- Supplied complete with leading brand lamp.

SON col 220, HQI col 740

- Symmetric distribution

- Timed ignitor

- Windage: 0.16m2

- Weight: See table below

OPTIONS


available. Add suffix PEC

PC COVER Polycarbonate cover available

for food processing applications. To be

ordered as a separate item, as listed.

EXTRAS For mounting accessories,

see page 220.

ORDER CODE DESCRIPTION WEIGHT KG

NAZ150SON-T/220 ARIZONA 150W SON BK FLOOD + LAMP 6.45



NAZ250HQI-T/740 ARIZONA 250W HQI BK FLOOD + LAMP 6.5

NAZ400HQI-T/740 ARIZONA 400W HQI BK FLOOD + LAMP 7.3

ACCESSORIES

NAZ/COVER/PC ARIZONA PC COVER

HID


FLOOD LIGHTING

160

30

3-Ø11

240 115

370

290

325 127

500

400

215

50

3-Ø15.5

NEW YORK 70W160

30

3-Ø11

240 115

370

290

325 127

500

400

215

50

3-Ø15.5 NEW YORK 150W

420 170

530

450

285

50

3-Ø15.5 NEW YORK 250 - 400W

APPLICATIONS

- Salt-laden environments and coastal

areas, including:

- Building signage illumination

- Perimeter and security lighting

- General amenity use

CONSTRUCTION

- HQI 70W, 150W, 250W and 400W

- SON 250W and 400W

- Supplied with European brand lamp

- 70W/150W symmetric distribution

- 250W/400W asymmetric distribution

TECHNICAL DETAILS

- Polybutylene therephthalate (PBT) body

for salt and pollution resistance

- Black self-colour finish

- Stainless steel mounting bracket

- One-piece toughened glass cover on

PBT hinges

- 3 body sizes with weights as follows:

OPTIONS


available. Suffix PEC

WEIGHT & WINDAGE

Small body, 70W HQI

Weight 3.75kg, Windage 0.07m2

Medium body, 150W HQI

Weight 6.75kg, Windage 0.13m2

Large body,

Weight 250W SON & HQI 9.00kg

Weight 400W HQI 10.00kg

Weight 400W SON 11.20kg

Windage 0.19m2

NEW YORKIP65 PBT floods for 70W, 150W, 250W

and 400W HID lamps


NNY70HQI-DE/740 NEW YORK 70W MH PBT FLOOD + 740 LAMP

NNY150HQI-DE/740 NEW YORK 150W MH PBT FD.LIGHT + 740 LAMP

NNY250SON-T/220 NEW YORK 250W SON PBT FLOOD + 220 LAMP

NNY400SON-T/220 NEW YORK 400W SON PBT FLOOD + 220 LAMP

NNY250HQI-T/740 NEW YORK 250W MH PBT FLOOD + 740 LAMP

NNY400HQI-T/740 NEW YORK 400W MH PBT FLOOD + 740 LAMP

SPARES

NNY/BRKT/250-400/3.5MM NEW YORK MOUNTING BRACKET 250-400W

NEW YORK 250W - 400W ASYMMETRIC

NEW YORK 150W SYMMETRIC

NEW YORK 70W SYMMETRIC

HID


FLOOD LIGHTING

SENATORIP65 rated 1,000W HID asymmetric floodlight

APPLICATIONS

- Larger sports facilities

CONSTRUCTION

- Aluminium body chromate treated then

polyester powder coated to RAL9006

- Galvanised steel mounting bracket

- Teflon pressure equalisation valve fitted

- Connection box with ignitor attached to

main housing

- Separate die cast aluminium IP65 gear

enclosure

- Weight: 16.5kg.

- Windage: 0.275m2

TECHNICAL DETAILS

- For 1,000W HID E40 lamps

- Choice of 4 asymmetric optics, with peak

intensityat50˚fromvertical.

- Complete with E40 tubular lamp

and gear

- Available as a complete fitting with lamp

and IP65 rated gear enclosure (complete

with gear), or as separate items – body,

lamp and populated gear enclosure.

OPTIONS

OPTICS Choice of 4 optics:

• Wide beam

• Wide beam with deflector

• Semi-narrow beam

• Semi-narrow beam with deflector

LAMP Available with 1,000W E40 Osram

lamp as listed. Also available with SON

colour 220 lamp. To order, replace HQI-T

/-/634 with SON-T/-/220

LOUVRE Anti-glare louvre available to be

ordered as a separate item, as listed.

COLUMNS AND BRACKETS For a range of

galvanised steel columns and mounting

accessories see pages 220-223.

COMPLETE FITTINGS

HID


NSN1000HQI-T/W/634 SENATOR 1000W HQI-T ASYM FLOOD WIDE +GEAR +634 LAMP

NSN1000HQI-T/WD/634 SENATOR 1000W HQI-T ASYM FLOOD WIDE+DEFLECT +GEAR +634 LAMP

NSN1000HQI-T/SN/634 SENATOR 1000W HQI-T ASYM FLOOD SEMI-NARROW +GEAR +634 LAMP

NSN1000HQI-T/SND/634 SENATOR 1000W HQI-T ASYM FLOOD SEMI-NARR+DEF +GEAR +634 LAMP

ACCESSORIES

NSN/LOUVRE SENATOR ANTI-GLARE LOUVRE SILVER


FLOOD LIGHTING

BODY WITH IGNITOR


NSN1000/BODY/W SENATOR 1000W GREY ASYM FLOOD BODY C/W IGN WIDE

NSN1000/BODY/WD SENATOR 1000W GREY ASYM FLOOD BODY C/W IGN WIDE+DEFLECT

NSN1000/BODY/SN SENATOR 1000W GREY ASYM FLOOD BODY C/W IGN SEMI-NARROW

NSN1000/BODY/SND SENATOR 1000W GREY ASYM FLOOD BODY C/W IGN SEMI-NARROW+DEF

LAMP


NL/1000/HQI-T/W/N LAMP OSRAM 1000W HQI-T W/N E40 COL634 4008321528285

GEAR IN IP65 ENCLOSURE


NG/1000/ENCL/IP65/FL GEAR BOX 1000W HQI-T IP65 ENCLOSED 230V 50Hz FL60409

BODY made from

high purity aluminium

sheet, pre-treated

and polyester powder

coated to RAL9006 for

maximum durability in all

environments.

HEAVY DUTY

galvanised steel

mounting bracket.

GLASS retaining frame

made of die-cast

aluminium, pre-treated

and finished to RAL9006.

IGNITOR HOUSING

SILICON rubber

anti-ageing gaskets.

STAINLESS STEEL

spring clips for glass

cover retention.

ANTI-GLARE louvre

available (illustrated

below) attaches here.

SENATOR is available with a choice of 4 optics:

SENATOR can be ordered either as a complete item, as listed

opposite, or as 3 separate components, body, lamp and gear,

as follows:

max 30˚

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

150

300450

600750

900

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

100

200300

400500

600

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

150

300450

600750

900

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

75

150225

300375

450

max 50˚

max 50˚

max 50˚

max 30˚

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

150

300450

600750

900

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

100

200300

400500

600

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

150

300450

600750

900

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

75

150225

300375

450

max 50˚

max 50˚

max 50˚

max 30˚

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

150

300450

600750

900

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

100

200300

400500

600

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

150

300450

600750

900

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

75

150225

300375

450

max 50˚

max 50˚

max 50˚

max 30˚

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

150

300450

600750

900

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

100

200300

400500

600

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

150

300450

600750

900

0-50 -̊30˚10˚ 10˚0˚ 30˚50˚

75

150225

300375

450

max 50˚

max 50˚

max 50˚

Widebeam30˚ Wide beam with deflector

Semi-narrow beam Semi-narrow beam with deflector

ANTI-GLARE LOUVREDIE-CAST ALUMINIUM IP65 GEAR ENCLOSURE


FLOOD LIGHTING

CIRCULAR LOUVRE

IP65 GEAR ENCLOSURE

ATTACHMENTS

FLYERIP66 rated 1,000W and 2,000W circular symmetric floodlight

COMPLETE FITTINGS


NFL1000HQI-TS/R1/861 FLYER 1000W HQI-TS PROJECTOR FLOOD R1 +GEAR +861 LAMP

NFL2000HQI-TS/R1/862 FLYER 2000W HQI-TS PROJECTOR FLOOD R1 +GEAR +862 LAMP


NFL/LOUVRE FLYER CIRCULAR LOUVRE SILVER

APPLICATIONS

- Medium and large stadiums, especially

with TV cameras

- Large indoor sports arenas

CONSTRUCTION


pre-treated then polyester powder

coated to RAL9006


- Two Teflon pressure equalization valves

fitted


main housing

- Separate die cast aluminium IP65 gear

enclosure

TECHNICAL DETAILS

- For 1,000W & 2,000W metal halide

short-arc lamps

- Choice of 9 reflector designs for

precision lighting



with gear), or as separate items – body,


- Weight: 15.5kg.

- Windage: 0.2m2

OPTIONS


R1 is listed. Others available are numbered

R2-9. See photometric data opposite and

order accordingly.

LAMP Available with 1,000W & 2,000W

short-arc Osram metal halide lamp as listed.

Also available with 1,000W SON colour 220

lamp. To order, replace HQI-T with SON-T.

LOUVRE Circular louvre available to be

ordered as a separate item, as listed

below.

HID


FLOOD LIGHTING

BODY made from high purity

die-cast aluminium, pre-treated

and polyester powder coated to

RAL9006 for maximum durability

in all environments.

CHOICE of 9 reflector patterns. R4 is illustrated.

TWO TEFLON pressure

compensation valves fitted.

SILICON rubber

anti-ageing gaskets.

FLYER can be ordered either as a complete item, as listed opposite,

or as 3 separate components, body, lamp and gear, as follows:

R1 and R2 listed. For other reflectors, replace R1-R2 with R3-R9 as required.

FLYER is available with a

choice of 9 reflectors, suffix

R1 – R9. To order, insert

appropriate suffix in order

code when ordering.

BODY WITH IGNITOR


NFL1000/BODY/R1 FLYER 1000W GREY PROJECTOR FLOOD BODY R1 C/W IGN




LAMP


NL/1000/HQI-TS/W/D/S LAMP OSRAM 1000W HQI-TS W/D/S PRO K12S COL861 4008321525475

NL/2000/HQI-TS/W/D/S/HF LAMP OSRAM 2000W HQI-TS W/D/S/HF K12S COL862 4008321338310



NG/1000/ENCL/IP65/FL GEAR BOX 1000W HQI-T IP65 ENCLOSED 230V 50Hz FL60409

OPTIONAL anti-glare

louvre available (illustrated

opposite) attaches here.

HEAVY DUTY galvanised

steel mounting bracket.

COMBINED IGNITOR

and connection housing in

self-extinguishing plastic.


FLOOD LIGHTING

IP65 GEAR ENCLOSURE

ANTI-GLARE LOUVRE

ATTACHMENTS

RANGERIP66 rated 2,000W metal halide asymmetric floodlight

COMPLETE FITTINGS


NRR2000HQI-TS/N/862 RANGER 2000W HQI-TS ASYM FLOOD NARROW +GEAR +862 LAMP

NRR2000HQI-TS/ND/862 RANGER 2000W HQI-TS ASYM FLOOD NARROW+DEFL +GEAR +862 LAMP

NRR2000HQI-TS/W/862 RANGER 2000W HQI-TS ASYM FLOOD WIDE BEAM +GEAR +862 LAMP


NRR/LOUVRE RANGER ANTI-GLARE LOUVRE SILVER

APPLICATIONS

- Sports grounds

- Large public areas

CONSTRUCTION


pre-treated then polyester powder

coated to RAL9006


- Two pressure equalization valves fitted


main housing

- Knife-switch fitted to interrupt the power

supply as soon as the body is opened

TECHNICAL DETAILS

- For 2,000W metal halide lamps

- Choice of 3 asymmetric trapezoidal

reflectors

- Available complete with Osram

double-ended short-arc lamp, and gear



with gear), or as separate items - body,


- Weight: 23.5kg.

- Windage: 0.49m2

OPTIONS


• Narrow beam

• Narrow beam with deflector

• Wide beam

LOUVRE Aluminium anti-glare louvre

available as listed. To be ordered as a

separate item.

HID


FLOOD LIGHTING

BODY made from die-

cast aluminium with

low copper content

for best durability in all

environments. Polyester

powder coated to

RAL9006.

HEAVY DUTY galvanised

steel mounting bracket.

OPTIONAL ANTI-GLARE

louvre available

(illustrated opposite)

attaches here.

CONNECTION

HOUSING, with ignitor.

PROTRACTOR fitted

to assist in precise

vertical aiming.AUTOMATIC

ISOLATION of the

lamp holders as

soon as the cover is

opened.

RANGER IS AVAILABLE WITH A CHOICE OF 3 REFLECTORS:

RANGER can be ordered either as a complete item, as listed

opposite, or as 3 separate components, body, lamp and gear,

as follows:

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

300

600900

12001500

1800

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

300

600900

12001500

1800

max 62˚

max 60˚

max 58˚

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

375

7501125

15001875

2250

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

300

600900

12001500

1800

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

300

600900

12001500

1800

max 62˚

max 60˚

max 58˚

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

375

7501125

15001875

2250

NARROW BEAN WITH DEFLECTOR

WIDE BEAM

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

300

600900

12001500

1800

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

300

600900

12001500

1800

max 62˚

max 60˚

max 58˚

0-90˚-60 -̊30˚ 0˚ 30˚ 60˚ 90˚

375

7501125

15001875

2250

NARROW BEAM

BODY WITH IGNITOR


NRR2000/BODY/N RANGER 2000W GREY ASYM FLOOD BODY C/W IGN NARROW

NRR2000/BODY/ND RANGER 2000W GREY ASYM FLOOD BODY C/W IGN NARROW+DEFLECT

NRR2000/BODY/W RANGER 2000W GREY ASYM FLOOD BODY C/W IGN WIDE BEAM

OSRAM SHORT-ARC LAMP


NL/2000/HQI-TS/W/D/S/HF LAMP OSRAM 2000W HQI-TS W/D/S/HF K12S COL862 4008321338310



NG/2000/ENCL/IP65/FL GEAR BOX 2000W HQI-TS IP65 ENCLOSED 400V 50Hz FL60408


FLOOD LIGHTING

IGNITOR HOUSING

MANITOBAIP65 aluminium diecast flood for 1,000W SON and HQI lamps

APPLICATIONS

- Sports grounds

- Large public areas

CONSTRUCTION

- Aluminium die-cast body

- Matt black textured powder coated finish

- Timed ignitor integral to body

- Ballast and capacitors remote mounted

- Polished dimpled aluminium reflector

TECHNICAL DETAILS

- SON-T and HQI-T 1000W

- Supplied with premium brand lamp


- Timed ignitor

- Weight (enclosure with ignitor): 9.5kg

- Windage: 0.27m2

OPTIONS

GEAR Available complete with gear

mounted in enclosure or supplied loose

• Available as head with timed ignitor only,

no gear or lamp

• Gear available as separate items as listed


NMA1000SON-T/220 MANITOBA 1000W SON ALU FLOOD ENCL GEAR +220LAMP

NMA1000HQI-T/740 MANITOBA 1000W HQI ALU FLOOD ENCL GEAR +740LAMP

NMA1000SON-T/LG/220 MANITOBA 1000W SON ALU FLOOD LOOSE GEAR +220LAMP

NMA1000HQI-T/LG/740 MANITOBA 1000W HQI ALU FLOOD LOOSE GEAR +740LAMP

NMA1000/IO MANITOBA 1000W SON ALU FLOOD BODY & IGNITOR ONLY

NMA1000/NG MANITOBA 1000W SON ALU FLOOD BODY ONLY NO GEAR

COMPONENTS & SPARES

NMA/ENCL/1000W MANITOBA CONTROL GEAR 1000W SON/HQI STEEL ENCL

NCG/SON-HQI/1000/VE BALLAST 1000W SON/HQI HDP002232 VENTURE

NCG/IGN/1000/T/VE IGNITOR 1000W TIMED MCI1000 VENTURE

NCG/CAP/50MF/VE CAPACITOR 50MF R1008HP500P25 VENTURE

HID


FLOOD LIGHTING


ACCESSORIES

ACCESSORIES

COLUMNS TUBULAR RIGID

PAGE 221

STREEET LIGHT & POST TOP ACCESSORIES

PAGE 219

FLOOD LIGHT ACCESSORIES

PAGE 220

COLUMNS TUBULAR MID-HINGED

PAGE 222

COLUMNS TUBULAR BASE-HINGED

PAGE 223

PHOTO-ELECTRIC CELLSPAGE 224

LED TAPEPAGE 229

DRIVERSPAGE 230

HID LAMPSPAGE 226

OCCUPANCYSENSORSPAGE 225

LED TUBESPAGE 228

STREET LIGHT & POST TOP ACCESSORIES


ACCESSORIES

STREET LIGHT & POST TOP ACCESSORIES

A range of accessories for exterior lighting is available. They are all made of mild steel,galvanised to BS729. Where supplied, all fasteners are made of stainless steel.

NRLB/76/1/300/48

NRLB/CW/1/200/48

NRLB/76/2/300/48

NRLB/CW/1/200/60

300 300 300

200ø76 INT ø76 INT

ø48 5˚

ø48 5˚ ø48 15˚

300 300 300


ø48 5˚

ø48 5˚ ø48 15˚

200

ø60 15˚

300 300 300


ø48 5˚

ø48 5˚ ø48 15˚

ø60

600

ø76 INT

ø60 TYP

ø60ø60

150

150

ø76 INT ø80

NPTB/76/4/600/60NPTB/76/3/600/60NPTB/76/2/600/60

STREET LIGHT ACCESSORIES


NRLB/76/1/300/48 ROAD LIGHT BRACKET 76MM COL 1 OFF 300X48MM ARM






NPTB/76/2/600/60 POST TOP BRACKET 76 2 OFF 600X60MM ARMS




NRLB/CW/1/200/48 ROAD LIGHT BRACKET CORN/WALL 1 OFF 200X48MM ARM


NRLB/CW/1/200/60 ROAD LIGHT BRACKET CORN/WALL 1 OFF 200X60MM ARM

ø60

600

ø76 INT

ø60 TYP

ø60ø60

150

150

ø76 INT ø80

ø60

600

ø76 INT

ø60 TYP

ø60ø60

15015

0

ø76 INT ø80

ø60

600

ø76 INT

ø60 TYP

ø60ø60

15015

0

ø76 INT ø80

ø60

600

ø76 INT

ø60 TYP

ø60ø60

15015

0

ø76 INT ø80

POST TOP ACCESSORIES

ORDER CODE

DESCRIPTION

NSR/76-60/EXT SPIGOT REDUCER 76-60MM EXTERNAL

ORDER CODE

DESCRIPTION

NSR/76-60/INT SPIGOT REDUCER 76-60MM INTERNAL

ORDER CODE

DESCRIPTION

NPTB/WT/1/60 POST TOP BRACKET WALL TOP 1X60MM

The most popular items are listed here, but more are available. Please enquire for details.


ACCESSORIES

FLOOD LIGHTACCESSORIESAll floodlights up to and including 400W fit NFB/1/76, NFB/SMP and NFB/SMP/CLAMP except for NEW YORK.

Accessories with the suffix NY have additional drillings and are universal - suitable for all NVC floodlights including NEW YORK.

For 1000W and 2000W floodlights specialist accessories will be required. Please contact us for assistance.


NFB/1/76 FLOOD BRACKET 1X76MM COL

NFB/1/76/NY FLOOD BRACKET 1X76MM COL




ORDER CODE

DESCRIPTION

NFB/W/300 FLOOD BRACKET WALL

ORDER CODE

DESCRIPTION

NFB/SMP STIRRUP MOUNTING PLATE

NFB/SMP/NY STIRRUP MOUNTING PLATE

ORDER CODE

DESCRIPTION

NFB/SMP/CLAMP STIRRUP MOUNTING PLATE POLE CLAMP

NFB/SMP/CLAMP/NY STIRRUP MOUNTING PLATE POLE CLAMP

NFB/1/76

NFB/SMP NFB/SMP/CLAMP

NFB/1/76/NY

NFB/SMP/NY NFB/SMP/CLAMP/NY

146

300 125

240

240

ø76

100

150

200

240ø76 INT

ø76 INTø76 INT

626 1000

146

300 125

240

240

ø76

100

150

200

240ø76 INT

ø76 INTø76 INT

626 1000

146

300 125

240

240

ø76

100

150

200

240ø76 INT

ø76 INTø76 INT

626 1000

146

300 125

240

240

ø76

100

150

200

240ø76 INT

ø76 INTø76 INT

626 1000

146

300 125

240

240

ø76

100

150

200

240ø76 INT

ø76 INTø76 INT

626 1000

146

300 125

240

240

ø76

100

150

200

240ø76 INT

ø76 INTø76 INT

626 1000


ACCESSORIES

In each range we offer root mounted or flange plated. Here and on the next two pages we list the most popular types – all tubular steel, rigid, mid-hinged and base-hinged,

in 4m, 5m, 6m and 8m (nominal) sizes.

More specialist columns and masts (stainless steel, aluminium, conical, octagonal etc) are available. Please enquire for details.

COLUMNS TUBULAR RIGID


NCOL/3/76 COLUMN GALV STEEL ROOT 3M X 76MM





NCOL/8/114/HD COLUMN GALV STEEL ROOT 8M X 114MM H/DUTY





NCOL/FP/3/76 COLUMN GALV STEEL FLANGE PLATED 3M X 76MM





NCOL/FP/8/114/HD COLUMN GALV STEEL FLANGE PLATED 8M X 114MM H/DUTY




A

D

C

B

BASE COMPARTMENT3-6M = 100 x 5008M-12M = 115 x 600

75 x 150 CABLE FLANGEPLATE FIXINGENTRY SLOT

EXTRA 206 INSERTon 8-12M

BHEIGHT A DC

3M 3000 800 ø76 ø140

4M 4000 800 ø76 ø140

5M 5000 800 ø76 ø140

6M 6000 1000 ø76 ø140

8M 7700 1200 ø89 ø168

8M/HD 7700 1200 ø114 ø168

10M 9700 1200 ø114 ø168

10M/HD 9700 1200 ø114 ø192

12M 11700 1700 ø168 ø192

A

D

C

B

B



BHEIGHT A DC

3M 3000 200 ø76 ø140

4M 4000 200 ø76 ø140

5M 5000 200 ø76 ø140

6M 6000 200 ø76 ø140

8M 7700 300 ø89 ø168

8M/HD 7700 300 ø114 ø168

10M 9700 300 ø114 ø168

10M/HD 9700 300 ø114 ø192

12M 11700 300 ø168 ø192

A

D

C

B




BHEIGHT A DC

3M 3000 800 ø76 ø140

4M 4000 800 ø76 ø140

5M 5000 800 ø76 ø140

6M 6000 1000 ø76 ø140

8M 7700 1200 ø89 ø168

8M/HD 7700 1200 ø114 ø168

10M 9700 1200 ø114 ø168

10M/HD 9700 1200 ø114 ø192

12M 11700 1700 ø168 ø192

A

D

C

B

B



BHEIGHT A DC

3M 3000 200 ø76 ø140

4M 4000 200 ø76 ø140

5M 5000 200 ø76 ø140

6M 6000 200 ø76 ø140

8M 7700 300 ø89 ø168

8M/HD 7700 300 ø114 ø168

10M 9700 300 ø114 ø168

10M/HD 9700 300 ø114 ø192

12M 11700 300 ø168 ø192

We offer a range of galvanised steel columns, all designed to BS EN40, PD6547:2004+A1:2009.

OPTIONS

- Additional underground protection:

• For bitumen coated add suffix BC

• For glass flake coating add suffix GF

- Paint finishes, additional to galvanising:

• For a primed finish, add suffix P

• For other paint finishes, enquire for details


ACCESSORIESA

4-6M = ø1408M = ø168

ø76

B

BASECOMPARTMENT115 x 600


EXTRA 206 INSERTon 8M

ø89

BHEIGHT A

4M 4000 1000

5M 5000 1000

6M 6000 1000

8M 7700 1200

BHEIGHT A

4M 4000 200

5M 5000 200

6M 6000 200

8M 7700 300

A

4-6M = ø1408M = ø168

B

B



ø76

ø89

A

4-6M = ø1408M = ø168

ø76

B




ø89

BHEIGHT A

4M 4000 1000

5M 5000 1000

6M 6000 1000

8M 7700 1200

BHEIGHT A

4M 4000 200

5M 5000 200

6M 6000 200

8M 7700 300

A

4-6M = ø1408M = ø168

B

B



ø76

ø89

OPTIONS







Please check the suitability of a column

before ordering. Depending on where

the column is to be installed there are

different maximum allowed head weights

and windages. You will find the weight and

windage of each of our column mounted

fittings on their respective catalogue page.

The columns listed here are the most

popular, but a wide variety of other types

and styles is available. Please call us if you

need technical advice or would like to

discuss other column types.

ROOT MOUNTED FLANGE PLATED

COLUMNSTUBULAR MID-HINGED


NCOL/MH/4/76 COLUMN GALV STEEL MID-HINGE ROOT 4M X 76MM





NCOL/FP/MH/4/76 COLUMN GALV STEEL MID-HINGE FLANGE PLATED 4M X 76MM





ACCESSORIES


NCOL/FP/BH/4/76 COLUMN GALV STEEL BASE-HINGE FLANGE PLATED 4M X 76MM




A

4-6M = ø1408M = ø152

B




4-6M = ø768M = ø89

4-6M = ø768M = ø89

BHEIGHT A

4M 4000 1000

5M 5000 1000

6M 6000 1000

8M 7700 1200

BHEIGHT A

4M 4000 200

5M 5000 200

6M 6000 200

8M 7700 300

A

4-6M = ø1408M = ø152

B

B



A

4-6M = ø1408M = ø152

B




4-6M = ø768M = ø89

4-6M = ø768M = ø89

BHEIGHT A

4M 4000 1000

5M 5000 1000

6M 6000 1000

8M 7700 1200

BHEIGHT A

4M 4000 200

5M 5000 200

6M 6000 200

8M 7700 300

A

4-6M = ø1408M = ø152

B

B



OPTIONS







Please check the suitability of a column

before ordering. Depending on where

the column is to be installed there are

different maximum allowed head weights

and windages. You will find the weight and

windage of each of our column mounted

fittings on their respective catalogue page.

The columns listed here are the most

popular, but a wide variety of other types

and styles is available. Please call us if you

need technical advice or would like to

discuss other column types.

ROOT MOUNTED FLANGE PLATED

COLUMNSTUBULAR BASE-HINGED


NCOL/BH/4/76 COLUMN GALV STEEL BASE-HINGE ROOT 4M X 76MM




CUT-OUTS

A cut-out is typically required with every column.

These are to be ordered as separate items,

using the order code below.


NCUTOUT 2-POLE CUT-OUT 2X20MM NT06/TTG12 LESS LST FUSE


ACCESSORIES

PHOTO-ELECTRIC CELLS

NPECH PHOTO-ELECTRIC CELL HEAD

- 230-240V, 50/60hZ

- Conventional loads, 5A rated,

for LED loads 0.5A rated

- 20 lux on, 80 lux off

- IP65 when fitted

- NEMA male connector base

NPECK PHOTO-ELECTRIC CELL KIT

- 230-240V, 50/60hZ




- IP65

Where the catalogue page states that an integral PE cell is available to be ordered using the suffix “/PEC”, the PE cell supplied will be un-branded, switching on at 20 lux and off at 80 lux. The PE cell will be either an NPECR or an NPECI2P – as illustrated below.

An alternative approach is to order the fitting with a NEMA socket (suffix /NS) and purchase an NPECH (shown below) as a separate item to be fitted on-site. Where this approach is available it is stated on the catalogue page.

Where the catalogue states that a product is available with a miniature or part-night PE cell fitted, these below are the available options. They are all from Zodion or Royce Thompson.

NPECR PHOTO-ELECTRIC CELL REMOTE

- 230-240V, 50/60hZ




- IP65 when fitted

- Dimensions: 52 x 20.5 x 20.5.

17mm clearance hole for

installation

- Pre-wired with 300mm, 3 cores

NPECI2P PHOTO-ELECTRIC CELL 2-PART

- 230-240V, 50/60hZ




- IP65 when fitted

MINIATURE PE CELL, SUPPLIED FITTED TO LUMINAIRE:

MINIATURE PART NIGHT PE CELL, SUPPLIED FITTED TO LUMINAIRE: NEMA PART NIGHT PE CELL, SUPPLIED AS SEPARATE ITEMS:

NEMA BASE SOCKET, SUPPLIED FITTED TO LUMINAIRE:

NEMA PE CELLS, SUPPLIED AS SEPARATE ITEMS:

For other settings and timings, please enquire.





…/PE1 MINIATURE PE CELL 35 LUX ON / 18 LUX OFF





N/NEMA/PE1 NEMA PE CELL 35 LUX ON / 18 LUX OFF





…/PN1MINIATURE PART NIGHT PE CELL 35 LUX ON / 18 LUX OFF, 2400HRS OFF / 0530 HRS O


N/NEMA/PN1NEMA PART NIGHT PE CELL 35 LUX ON / 18 LUX OFF,2400HRS OFF / 0530 HRS ON


…/NS NEMA BASE SOCKET FITTED

Many of the flood lights, street lights, amenity and post-top fittings in this catalogue are available with a photo-electric (PE) cell fitted.

All 4 of these PE cells (above) can be ordered as separate items if required.


ACCESSORIES

PASSIVE INFRA-RED OCCUPANCY SENSORS FOR HIGH-BAY APPLICATIONS

These are the Ex-Or sensors that are available fitted integrally to the OREGON LED range of fittings (see pages 156 & 161). A detection area diagram is on page 161.

Switching capacity – 10ADimming capacity – 10 DALI drivers


N/PIR/LS3100RHBF SENSOR PIR ON/OFF EX-OR

N/PIRD/LS3000DHBF SENSOR PIR ON/OFF & DIMMING

OCCUPANCY SENSORSThe sensors listed here are all available to be ordered as separate items if required.

Where indicated, some of them are also available integrally fitted to some of our product ranges.

BATTEN-MOUNT SENSORS

These sensors all have a 20mm threaded entry and are suitable (subject to their IP rating) for fitting to battens and non-corrosive fittings. They are all to be ordered as separate items to be fitted to the luminaire during installation.

These are the CP Electronics sensors that are available fitted integrally to the OREGON fluorescent range of fittings (see pages 157, 158, 159 & 161). A detection area diagram is on page 161. Their distinguishing features are their long range and great versatility. They are also available to be ordered as separate items if required, as listed here.

Switching capacity – 10AXDimming capacity – 10 DALI drivers, or 20 if the relay is disabled, or 5 if the “DALI-ON” feature is enabled. Relay operation and DALI-ON are parameters that can be set during commissioning.

PASSIVE INFRA-RED OCCUPANCY SENSORS FOR MOUNTING HEIGHTS TO 2.8m

These sensors are widely used in offices and are suitable for use with many fittings in our recessed range fitted adjacently in the ceiling. If a maintained light level (daylight-dimming) is required be sure to order N/PIRD/EBDSPIR-DD, which has a DALI output, and order the fittings with DALI drivers by adding the suffix DA to the luminaire order code.

Switching capacity - 3ADimming capacity - 10 DALI drivers


N/PIR/EBDSPIR CEILING MOUNT PIR CP C/W LUX & TIME ADJUST

N/PIR/EBDSPIR-PRM CEILING MOUNT PIR CP C/W LUX & TIME ADJUST & IR OVERRIDE

N/PIRD/EBDSPIR-DD CEILING MOUNT PIR CP DIGITAL DIM C/W LUX & TIME ADJUST & IR OVERRIDE

N/PIR/EBDSPIR-IP CEILING MOUNT PIR CP IP55 C/W LUX & TIME ADJUST

N/EBDSPIR/BB SURFACE MOUNT BACK BOX FOR EBDSPIR


N/MW/SST-MS04/ENCL BATTEN MOUNT MICRO-WAVE SENSOR IP20

N/PIR/EBMPIR-MB-PRM BATTEN MOUNT PIR IP65

N/PIR/EBMPIR-MB-DD BATTEN MOUNT PIR DIGITAL DIMMING IP65

N/PIR/EBMPIR-MB-110V-B BATTEN MOUNT PIR 110V BASIC IP65


N/PIR/EBDHS-PRM SENSOR PIR ON/OFF

N/PIR/EBDHS-DD SENSOR PIR & MAINTAINED LIGHT LEVEL DIGITAL DIM


ACCESSORIES

NL/250/MH/E/740 LAMP 250W METAL U 250W CLOSED RATED CLEAR 21,000 84 20,000 2.15 4000 65 12 HALIDE ELLIPTICAL E40 COL740 NVC

NL/400/MH/E/740 LAMP 400W METAL U 400W CLOSED RATED CLEAR 38,000 90 20,000 3.25 4000 65 6 HALIDE ELLIPTICAL E40 COL740 NVC

NL/150/MH/T/E40/740 LAMP 150W METAL U 150W CLOSED RATED CLEAR 14,000 93 15,000 1.80 4000 65 12 HALIDE TUBULAR E40 COL740 NVC

NL/250/MH/T/740 LAMP 250W METAL H+/-45° 250W CLOSED RATED CLEAR 21,000 84 15,000 2.15 4000 65 12 HALIDE TUBULAR E40 COL740 NVC

NL/400/MH/T/740 LAMP 400W METAL H+/-45° 400W CLOSED RATED CLEAR 36,000 90 12,000 3.25 4000 65 12 HALIDE TUBULAR E40 COL740 NVC

NL/50/MH/E/UVS/ LAMP 50W METAL U 50W UV CLOSED CLEAR 3,200 64 10,000 0.76 4000 65 24E27/740 HALIDE ELLIPTICAL UV SHIELD RATED SHIELD E27 COL740 NVC

NLA/70/MH/E/UVS/ LAMP 70W METAL U 70W UV CLOSED CLEAR 5,300 76 15,000 0.98 4000 65 24E27/740 HALIDE ELLIPTICAL UV SHIELD RATED SHIELD E27 COL740 NVC

NL/150/MH/E/UVS/ LAMP 150W METAL U 150W UV CLOSED CLEAR 13,300 89 15,000 1.80 4000 65 24E27/740 HALIDE ELLIPTICAL UV SHIELD RATED SHIELD E27 COL740 NVC

NL/35/CMH/G12/942 LAMP 35W CERAMIC U V 35W UV CLOSED CLEAR 3,500 95 10,000 0.45 4200 90 48 METAL HALIDE SHIELD RATED G12 COL942 NVC

NL/70/CMH/G12/942 LAMP 70W CERAMIC U V +/-60° 70W UV CLOSED CLEAR 6,600 90 12,000 0.98 4200 90 48 METAL HALIDE SHIELD RATED G12 COL942 NVC

NL/150/CMH/G12/942 LAMP 150W CERAMIC U V 150W UV CLOSED CLEAR 13,500 94 12,000 1.80 4200 90 48 METAL HALIDE SHIELD RATED G12 COL942 NVC

NL/70/CMH/DE/942 LAMP 70W CERAMIC U H 70W UV CLOSED CLEAR 6,300 94 12,000 0.86 4200 90 48 METAL HALIDE DOUBLE SHIELD RATED ENDED COL942 NVC

NL/150/CMH/DE/942 LAMP 150W CERAMIC U H 150W UV CLOSED CLEAR 13,000 90 12,000 1.70 4200 90 48 METAL HALIDE DOUBLE SHIELD RATED ENDED COL942 NVC

NL/70/MH/DE/740 LAMP 70W METAL H+/-45° 70W - CLOSED CLEAR 6,500 73 15,000 0.98 4200 65 40 HALIDE DOUBLE END - RATED COL740 NVC

NL/150/MH/DE/740 LAMP 150W METAL H+/-45° 150W - CLOSED CLEAR 14,000 75 15,000 1.80 4200 65 40 HALIDE DOUBLE END - RATED COL740 NVC

ORDER CODE DESCRIPTION OPERATING POSITION POWER FEATURES INITIAL EFFICIENCY AV. LIFE CURRENT CCT CRI PACK Elec. Mag. W LUMENS lm lm/W hours A °K Ra QTY Ea

G12 RX7s E40 TUBULAR E40 ELLIPTICAL E40 TUBULAR E40 ELLPTICALE27 E27 INTEGRAL IGNITOR

E27 ELLIPTICAL



E40 TUBULAR



RX7S



E40 ELLIPTICAL

HID LAMPSMETAL HALIDE LAMPS



G12


ACCESSORIES

NL/150/SON/E/220 LAMP 150W SODIUM U 150W COATED 17,000 113 20,000 1.80 12 ELLIPTICAL E40 COL220 NVC



NL/150/SON/T/220 LAMP 150W SODIUM U 150W CLEAR 17,500 117 20,000 1.80 12 TUBULAR E40 COL220 NVC

NL/250/SON/T/220 LAMP 250W U 250W CLEAR 33,200 133 20,000 3.00 12 SODIUM TUBULAR E40 COL220 NVC

NL/400/SON/T/220 LAMP 400W U 400W CLEAR 56,500 141 20,000 4.60 12 SODIUM TUBULAR E40 COL220 NVC



HID LAMPSSODIUM LAMPS

E40 TUBULAR ORDER CODE DESCRIPTION OPERATING POSITION POWER FINISH INITIAL EFFICIENCY AV. LIFE CURRENT PACK Elec. Mag. W LUMENS lm lm/W hours A QTY Ea


E40 ELLIPTICAL ORDER CODE DESCRIPTION OPERATING POSITION POWER FINISH INITIAL EFFICIENCY AV. LIFE CURRENT PACK Elec. Mag. W LUMENS lm lm/W hours A QTY Ea

ORDER CODE DESCRIPTION OPERATING POSITION POWER FEATURES INITIAL EFFICIENCY AV. LIFE CURRENT CCT PACK Elec. Mag. W LUMENS lm lm/W hours A °K QTY Ea

NL/70/SON/EI/220 LAMP 70W SODIUM E27 U 70W INTEGRAL CLEAR 5,600 80 18,000 0.98 1900 24 ELLIPTICAL INTEG IGNITOR IGNITOR COL220 NVC

E27 INTEGRAL

IGNITOR


ACCESSORIES

APPLICATIONS

- Suitable for frequent switching,

e.g. with occupancy sensors

- For ambient temperatures not

exceeding 25°C

INSTALLATION

- To install in a former HF fitting the HF

gear must be removed from the circuit

for the LED tube to function.

- To install in a former switch-start fitting

the magnetic gear must be removed

from the circuit first if the maximum

energy savings are to be achieved.

- Supplied complete with a link to replace

the starter in a former switch-start fitting.

TECHNICAL DETAILS

- Four lengths are available, all delivering 100 lumens per watt, as follows::

• 2’, 9W, 900 lm

• 4’, 18W, 1,800 lm

• 5’, 22W, 2,200 lm

• 6’, 30W, 3,000 lm

- Rated life:

• >15,000 switching cycles

• 35,000 hours

- CCT, choice of 4000K or 6500K

- CRI >80

- Power factor >.9

- Input voltage, 180-264v

- Glass tube construction with

shatterproof plastic sleeve

LED TUBESA range of LED T8 tubes in 2’, 4’, 5’ & 6’ lengths for energy saving retro-fit projects


NL/9/LED/T8/840 LED LAMP T8 9W COOL WHITE 4000K 590MM 2FT

NL/9/LED/T8/865 LED LAMP T8 9W DAYLIGHT 6500K 590MM 2FT






NL/30/LED/T8/865 LED LAMP T8 30W DAYLIGHT 6500K 1764MM 6FTC0 C45 C90

45°45°

60°60°

75°75°

90°90°

105°105°

120°120°

135°135°

80

120

160

I (cd/klm)


ACCESSORIES

LED TAPEA range of LED tapes for decorative residential

and commercial use


NL/24/LED/TAPE/IP20/830 LED TAPE 5M 24W 12V IP20 WARM WHITE 3000K

NL/24/LED/TAPE/IP20/865 LED TAPE 5M 24W 12V IP20 DAYLIGHT 6500K



NL/24/LED/DRIVER/IP20 LED TAPE 24W DRIVER CONSTANT VOLTAGE IP20 12V 3A






NL/72/LED/DRIVER/IP20 LED TAPE 72W DRIVER CONSTANT VOLTAGE IP20 12V 6A

5 5 33 2

LED IP20 TAPE SUPPLIED IN 5M REELS

LED IP44 TAPE SUPPLIED IN 5M REELS

LED IP20 TAPE WITH DRIVER

24W LED TAPE 72W LED TAPE

APPLICATIONS

- Standard output suggested for

domestic/residential projects

- High output suggested for commercial

and retail projects

- All strips can be cut to length as required

at 50mm intervals. Minimum length 1m

- One driver per strip. Note that drivers

and strips are to be ordered separately

- Easy to fit – supplied with double-sided

adhesive tape fitted.

TECHNICAL DETAILS

- IP rating – choice of IP20 or IP44.

Note that the drivers are IP20

- CCT – choice of 3000K or 6500K

- Wattage – choice of:

• Standard output, 24W/5m length

• High output, 72W/5m length

- Input voltage – 100–240v

- Light output:

24W

• 3000K – 300 lm/m

• 6500K – 360 lm/m

72W

• 3000K – 600 lm/m

• 6500K – 700 lm/m


D000077 DRIVER LED DCC 15W 350MA/U S TCI

- Input: 220-240v, 50Hz

- Output: 43V DC, 350mA

- Power: 15W

- Ambienttemp: -25˚C-+45˚C

- Power factor: 0.54

- Approvals: ENEC, KEMA

- Class: II, SELV

- Protection: Thermal, overload,

short-circuit and

spike protection

D000078 DRIVER LED 6 DC 350MA IP67 97504 GE

- Input: 120-240v, 50Hz

- Output: 2-20V DC, 350mA

- Power: 6W

- Ambient temp: -25°C - +45°C

- Power factor: 0.5

- Approvals: ENEC, VDE

- Class: II, SELV


short-circuit and

spike protection

DRIVERSIn most cases our LED products are supplied complete with driver.However, in some cases it is more appropriate for the drivers to be supplied separately.

Below are listed suitable drivers for use with the HATFIELD, THORESBY, CAPITOL, CRATER, CANYON & CASCADE.

D000076 DRIVER LED DC 8W 350MA STU/C TCI

- Input: 220-240v, 50Hz

- Output: 24V DC, 350mA

- Power: 8W

- Ambienttemp: -20˚C-+50˚C

- Power factor: 0.6

- Approvals: KEMA

- Class: II, SELV


short-circuit and

spike protection

ACCESSORIES

STREET LIGHTING

Documents

Transcript of STREET LIGHTING