EXHIBIT W

Case No. 1:14-cv-00857-TSC-DAR

AMERICAN EDUCATIONAL RESEARCH ASSOCIATION, INC. et al v. PUBLIC.RESOURCE.ORG, INC. Doc. 60 Att. 27

Dockets.Justia.com

g ,EffilBlr ,\g h\"^)¿ au,,-"-aXå..-@41^ -)^E-=ttHslrz-lt{

PffBã,fÇ.ffi.H$ffitrR#ffi .tR# - A Nonproíit Corporation

Open Source .ILrnerica's Operating System"lt's Not Just à Good ldea-It's The Law!"

July 14, 2009

Gary M. Stern, Ceneral CounselNational Archives and Records AdministrationNCC-Room 31108601 Adelphi RoadCollege Park, MD 20740

Dear Mr. Stern.

This is a request under the Freedom of lnformation Act (FOIA), jt U.5.C. 5 552 asfurther specified in the National Archives and Records Administration (NARA) FOIARegulations, 36 C.F.[1-. 5 1250. The purpose of this request is to obtain copies of alltechnical standards that have been lncorporated By Reference into the Code of tederalRegulations.

ln addition to the requirements of the FOIA, this request should be granted because itis for access to the text of the binding laws that govern the operations and activities ofgovernment as well as all citizens. This request should be granted based on thespecific requirements of 1C.F.R. 5 51 governing the lncorporation By Referencemechanism, the requirements of tJ[48 Circular A-130, the policies of our newPresident, and long-standing principles of due process and equal protection clearlystated by the courts.

Incorporation Bv Reference and the Gode of Federal Retfulations

The U.S. Code requires publication in the Federal Register of "rules of procedure,""substantive rules," and other information published by agencies of the executivebranch. However, the Act specifies "matter reasonably available to the class of personsaffected thereby is deemed published in the Federal Registerwhen incorporated byreference therein with the approval of the Director of the Federal Register-" 5 U.S.C. 5552(a).

According to the NARA lncorporation By Reference Manual: "Congress authorizedincorporation by reference in the Freedom of lnformation Act to reduce the vof ume ofmaterial published in the Federal Register and C.F,R.. (See 5 U.S.C. 5 552(a) and 1

C.F.R. 5 51). Congress gave complete authorityto the Director of the Federal Registerto determine whether a proposed incorporation by reference serves the publici nte rest."

ln I C.F.R. 5 51, NARA spells out several requirements bywhich the lncorporation ByReference mechanism is carried out, including a requirement that the publication be

PROAERA OOO1O{53

FOIA Request, Page 2

^l---.1 ^^ Êlã r¡,i+h Àl ^D^

ln -rl,li+inn +Lo ^o.Þ.-nic'm i< nttita nrarica tadt¡irinn tIJTaLLU ulr rrrL ¡, LrrL rrrllr

spec¡fic version of a specific standard, and substantial requirements of notice, need,and limitation of scope, as well as an affirmative determination for each standard bythe Dírector of the Office of ihe Federal Register.

Nowhere in the U.S. Code orthe C.F.R. is there an exemption of these technicalstandards from the requirements of the FOIA to make records available- However,NARA does appearto have an informal policy, not published in the C.F-R. or otherformal regulat¡ons, with prom¡nent notices that proclaim "OFR does not distribute IBRmaterials" and "This site does not link to or contain standards incorporated byreference into tf'¡e CFR." [emphasis in original at the CFR v¡eb site.]

What f lltn Specifically Ãskinq Foz

lwould like NARA to make available some or all of the standards that have beenInrnrnnreted Rrr Refer-cnrc f hrnunh ânv nnF nf the fn!lnr¡¡ino mechanÍsms:

. NARA can simply scan all IBR materials and make them available in the E-C.F.R,web site you ma¡ntain in conjunction with the Government Print¡ng Office.

" NARA can allow Public.Resource.Org to scan or photocopy the materials at theoffice of Federal Register's downtown Washington, DC location. While there is aprocedure for doing this listed on your web site it seems to indirate pricrapproval is required of each copy request and it also appears you may not allowmore than limited copying.

. NARA can furnish the materials to Pubiic.Resource.Org as photocopies orelectronically under the usual and customary procedures of the FOIA.

lam particularly interested in technical standards from Undenvriters Laboratories, theAmerican National Standards lnst¡tute, and other standards that are expensive andunavailable on the lnternet and in public libraries. Foryour convenience, a specific listof the standards lam interested in is attached as Appendix A. lt is important to stressthatthese materials we are seeking are not readily available through other means:

o For example, Underwriters Laboratories Standard 727, "Oil-Fired CentralFurnaces," is a key safety standard that has been incorporated by reference intonumerous parts of our Code of Federal Regulations including 10 C.F.R. 5434.4O3.7,10 5 C.F.R. +31.76(c)(1), and 24 S C.F.R. 200. To purclrase thisLZ4-page standard costs $708 and the WorlrJcal,.OrE system shows that theonly library in the United States with a copy is the Washington State DepartmentLabor & lndustries library.

" Li[<ewise, Underwriters Laboratories Standard 1191, "standard for Componentsfor Personal Flotation Devices," is mandated bythe U.S. Coast Guard in 46 C.F.R.

55 160.002 , t60.047, 160.048, 160,049, 160.050, 160.052, 160.053,160.055 , 160.060, 160.064, 160.076, 76A.A77,160.150, 160.155, 160.176,164.019, and 164.023. Yet, the only copy of this standard listeel inWorldcat.Org is in the University of Wisconsin-Madison Ceneral Library System(1,700 miles away from my location) and it is the wrong version of the standard.To purchase the document costs $1,120.

. The only reasonably complete collections of ANSI documents available to thepublic in the United States appear to be at the lllinois State Library inSpringfield, lllinois and the Linda Hall Library in Kansas Cìty, Missouri.

ñõ^^-ñ A ^^^A^AEArñ.Lr¡lEfa,,LT UUU tU lO.t

FOLA. Request, Page 3

Request for Ner¡r¡s Media Fee Status

Public.Resource.Org asks that we not be charged search or rev¡ew fees for this requestbecause we qualify as a "representative of the news media" pursuant to the FOIA and36 C.F.R. 5 12 50.2(q).

Public.Resource.Org, lnc. is a 501(c)(3) public charity chartered to make governmentinformation more broadly available w¡thout fee to any and all users. We have been(ert¡fied as a "news media" requester for the purposes of obtaining and publishinggovernment records under the FOIA and other acts by the Department of the Army, theDepartment of the Air Force, the Department of Veteran Affairs, and the Food and DrugAdministration. I would be happy to furnish copies of these determinations at yourrequest.

Public.Resource.Org is also engaged in aJoint Venture with the NationalTechnicallnformation Service ('NT|S") under Agreemerrt No^ l.lTES-1832 to more broadlydisseminate hundreds of hours of video materials from the government onto thelnternet. Documents from this current FOIA request wÍll be promptly published,joining over 90 million pages of U.S. çlovernment documents we have made availableon the lnternet.

Due to our extensive publication activities of both raw materials and edìtorial products,Public.Resource.Org is a "representative of the news media" under the FOIA and agencyregulations. As such, this request is subject onlyto duplication fees after the first 100pages. However, all duplication fees should be waived, as discussed below, becausedisclosure of the information requested above is in the public interest.

Request for a Public Interest FeeWaiver

Public.Resource.Org is entitled to a waiver of duplication fees because disclosure of therequested information is in the public interest within the meaning of 36 C.F.R. 551250.58 and 1250.60. This request clearly satisfies these criteria.

A fee waiver is appropriate here because Public.Resource.Org has no commercialinterest in the disclosure of the requested records. Public.Resource.Org is a 501(cX3)nonprofit organizations and will derive no commercial benefit from the information atissue here and will distribute all documents widely at no charge on the lnternet.

Under 36 C.F.R.5 1260, several criteria are listed to be used in evaluating our request.This request meets all 6 of those criteria:

. As mentioned above, the primary legal materials published and binding on allcitizens is the very essence of "operations and activities of the FederalGovernment" under 36 CFR 5 1260(a)(1).

. Becalrse these materials are out of the reach of most Americans and are onlyavailable in a small handful of libraries, this activity will release "meaningfulinformation about Federal Covernment activities that [are] not already publiclyknown" under 36 CFR 5 1260(a)(2).

" Technical standards are the very nuts and bolts of our public safety,environmental, and other codes will "advance the understanding of the generalpublic on the issue" under 36 CFR 5 1260(a)(3).

" Public.Resource.Org has published over 90 million pages of primary legalmaterials and we have substantial exper¡ence working with technical standards

PROAERA_0001 01 55

FOIA. Request, Page 4

E^.. - )^--)-- )^^^^--ç--si^^ -^tL^,.^^-+ì-^ i^ ^- - *L^-^.,^L,,^A^--+^^Ài^- ^Etuf J utLduc5, u(f t¡uf t5ttdt¡¡¡g d¡t tÃpttrtJc ilr ut d (iluruu9rr uilucr)rqr¡u¡t¡9 u¡

these records" under 36 CFR 5 1260(a)(a).

" Public.Resource.Org maintains one of the most popular and visible documentservers on the lnternet for legal information and have demonstrated significantexpertise to "disseminate this information to a [rroad spectrum of the public"under 36 CFR 5 1260(a)(s).

" Disclosure of this material, making available standards that govern our dailyactivities but have been inaccessible to those without significant wealth w¡ll"ieacj to a significantiy greater understanding of the Covernmeni by the pubiic"under 36 CFR g 1260(a)(6).

It ¡s part¡cularly important to note that our prior work in making available public safetycodes at the state level has demonstrated that the general public has a tremendous¡nterest in reading and consulting these technical standards. The building, electrical,-t-.---r^:---

t^-:l-- -l-- --L^-- t-- ^,-) ^LL^- -..L1:- -^t^+.. -^)^- ..,^ -.,L1;-L^l f^- -ll trnfJtuf f tutf tgr uuiltst , ertsvdLUf , ilre, df tu uLiltst PuuilL 5dlcr,y LrJutr5 vvtr purJil)rt<u tut dil JUstates have been extremely popular not oniywith specialists in the trades but with thegeneral public, journalists, homeowners, and many others.

Lirnitation of Fees

lf you decide thatwe qualify neither as News Media or for a Public lnterest Fee Waiver,we agree to pay fees up to a maximum of $5,000. lf $5,000 is not sufficient to fullysat¡sfythe request of all IBR documents, please provide a partial response with $5,û00.^'^¡th ^Í A^-,,äôhf.vYUt ttt vt uuLur¡l!rrtJ-

lfìEl¡trt- l-iA.liæ-+i^¡a fT¡¿lav fiI\¡TE ñivarrl-v I-l Aô anå rf i+la Å.A.

lrrespective of your determination under the FOIA, we respectfully submit that NARA isrequired to make this information available under the requirements of the E-Covernment Act and related statutes and regulations- ln particular,44 U.S.C. S

1510(a) requires that the Code of Federal Regulations contain the "completecodifications of the documents of each agency of the Covernment having generalapplicability and legal effect, issued or promulgated bythe agency by publication inthe Federal Register or by filing with the Administrative Committee." Nowhere arestandards incorporateci by Reierence exciuded from this requirement.

Publication of the C.F.R. is governed under the provisions of OMB Circular A-130 whichstates that "the free flow of information between the government and the public is

essential to a democratic society" and requires that agencies, to the maximurn extentpossible, "disseminate information dissemination products on equitable and timelyterms." Requiring purchase of a $L,l"Z0 document in order to read the iaw of the iandis not equitable and does not promote a democratic society.

The policies of the E-Government Act and OMB promoting dissemination ofgovernment information should be considered in light of the clear, unequivocall:nnrr:no nf tha Þracidonr'< !¡¡rr¡rrr ?1 ?009 Mgr.noratrdunr: "ln the face of doubt,.r J Jú ¡!'s¡r

openness prevails." The President's instructions are very clear: "All agencies shouldadoþt a presumption in favor of disclosure, ín order to renew their commitment to theprinciples embodied in FOIA, and 1o usher in a new era of open Government. Thepresumption of disclosure should be applied to all decisions involving FOIA-"

I'KL,¡{EK/{ UUU"ÍU'ICÞ

FOIÄ Request, Page 5

Given the lack of any specific regulations governing disclosure of materialslncorporated By Reference, qiven the importance of these core materials, and given theclear, unqualified language of the President, NARA should disclose this material.

Prirnary Legal Materials Must Be Ãvailable To fhe Public

ln Veeckv. Southern Building Code Congress,293 F.3d79I (5th Circuit,2002), ChiefJudge Edith H. Jones clearly stated that "a continuous understanding that 'the law,'whether articulated in judicial opinions or legislative acts or ordinances, is in the publicdomain and thus not amenable to copyright."

ChiefJudgeJones and the 5th Circuitwere ruling consistentlyw¡th a long line ofdecisions dating back to Wheaton v. Peters, 33 U.S. (il Fet.) 591 (1834) which statedthat "the law, which, binding everycitizen, is free for publication to all, whether it is adeclaration of unwritten law, or an interpretation of a constitut¡on or statute."

It ¡s important to note that the Veeck decision was specifically on point in addressingthe mechanism of lncorporation By Reference, the same mechanism used by NARAforthe documents we are requesting. lndeed, when the Veeck decision was appealed tothe Supreme Court, the Court specifically invited the views and then followed thestrong recommendation of the Solicitor Ceneral in denying certiorari and upholding thedecision. ln that Amicus Brief, Solicitor General Olson stressed that the standardsincorporated by reference are "indistinguishable from other laws of generalapplicability that the public has always had the right to copy freely." Brief for theUnited States as Amicus Curiae, Nlo" 02*355, May 2003.

The purpose of the Federal Register system is to notify citizens what laws they mustobey. Access to the materials that make up the regulations of the executive branch isa foundational issue of our system of government. There can l¡e no due process orequal protection underthe law if the texts that make it up are not avaifable for citizensto read. This FOIA request should be granted because it is the very purpose of theOffice of the Federal Register to broadly disseminate the law and this request w¡llfurther that purpose.

Timeline for Response

As the FOIA provides, lwill anticipate a determinat¡on on this requestfrom your officewithin 20 working days.

Thank you for your consideration of this request.

Respectfully yours,

Carl MalamudPresident & CEOPu b lic.Res ou rce. Org

PROAERA OOOIOI57

AA ÀIuminum Desiçn Manuål' Specifícatíons and Guidelines for ÀIuminu¡n Structures/ Part 1-¿\, síxth Editl-on, octobeï 1994, ancl part lÀ-A-ASM 35*80 Specifications for Àluninunr Sheet Metal llork in auilding CÕnstruction ÀLuminum Association, 900 19th Stïeet. NIf, r l{asiÃÀI-RMÄ Specifications for Anhydtous Àmrronia HoselAgriculture Ànrnonia lhstilute-Rubber Manufacturers (AÀI-RMA) Àssociatir:n, 1400 ¡AÀMA 605-98 Voluntary Specification Requirements and Test Priocedures for High Perforrnance organic Coatings on Aluminum Extrusions ¿

AÀMÀ 1503,1-1988 Volutrtary Test Method for Tìrermal- Transmittance and Condensatj-on Resistance of t^lindows, Doors, ancì Glazed I'lall- SecÀÀ¡lA 1504--88 Voluntary Standard6 fo¡ Ther¡nal Performance of WindotJs, DoorÞ^ and Glazed hrall SectionÊÀAMA 1701.2-95 Voluntary Standard PTlmary windohr and S:.Idlng GIass Doox for Ut!Iization in Manufactured HousingAAìrIA 1704-1985 Vofuntary Standard Egress window systems for Utilization in Manufactured HousingÃÀMA-800-92 Voiuntary Specifications andTesè Methods for Sealants ATnerican Àrchitectural Manufacturers ÀssociationÄÄMA-I503.1-BB VoLuntary Test Method for Thermal lransmittance and Condensation Resistance of Windor,¡s, Doors and Giazed WalI SecticÀÀSHTO Guj-de Lo Metríc Corversion, ÀÀSHTO, 1993AASIITO LRFD Bridge Design Specifications, First EdiÈion, AASHTO 1994 (U.S. Unit6),i\¡\SIlTo Marrual "Manual for Condition Evaluation of Bridges," second editionA-ASHTO St¿rnclard Specifications for Movable Highway Bridges, ÀÀSHTO 1.988AASHTo Standard Specifications for Structural Sùpports for Highr.ray Signs, LuminaÍres and Traffic Slgnals¿ AÀSIt,Io 1994AASHTO Tr¿Lffic ûngineering Metric Conversion Factors, 1993-Àddendurn to the Guide to Melric Conversion, AÀSHTo, Octobe¡ I993À-ASHTO, À Policy on Design Standards IntersLaLe System, ÀASHTO, January 2005AÀSHTO, A Policy on Geometric Design of Highways and SlreetÉ, ÀÀSHÎO 2001 A-llerican Àssqciatino of State Hj.ghway anil Traffic Offici.AASHTo¿ Tnterim Specifícations-Brldges/ ¡\ASHTo 1993ÀASHTO, fnterim Specifications-Bridges, AASHTO 1994AASHTOT Tnterím Specífications-Bridges, ÀÀSHTO 1995ÀBS cuide for High Speed craftr 1997ABS Rul-es for Building and Classitlg À].uninum Vessels (1975)ABS Ruies for Building and Classing Mobil-e Offshore lrilling UnitÈ- (1994)ÄBS Ruies for Building and Classing Mobil-e Offshore Drilting Units/ 1998ÀBS Rul-es for Building and Cl-assing Reinforced Plastic VesseIs, I9'18ÀBS Ruies for Building and Classíng steel Vessels (L995)ÀBS Ruies for Building and Classing Steel Vessels fot Service on Rivers and Intracoastal l.Jatet:ways. 1995ÀBS Rures for Building and Classing Steel" Vessels Unde¡ 61 MeLers (200 feel) in Length, 1983ÀBS Rules for Building and Classing Steel Vessels. 1981ÀBS Rui.es for Building and Classing Steel Vessels, 1986ÀBS RuLes for Building and cl-as6in9 Steel Vesselsr 1989ÀBS Rules for Building and Classing Steel Vesselsf 1995ÀBS Ruies for Buil-ding and Classing Steel- Vessel-s, 1996ÀBS Rules for Building and C1assing SteeL Vesselst L997ÀBS Ru:-eB for Building and Classing Stee1 Vesse1s, 1998.A,BS U.S. SiuÞplenent to ÀBS Rules for Mobile offshore lrilling Unit.s, l- Junê 1998ABS U,S, l;upplement to ABS Rul-es for Steel vessels for Vessels on rnÈernationat voyages, 1 Àugust 1997ÀBS U.s. Supplement to ÀBS Rules for Steel Vessels for Vessels on International Voyagesf 2l Qctobet:1995ÀBYc A-I-78-"l4arine LPG-Liquefied Pet¡oleum cas Systems"ÀBYC A-1-93-Marine Liquified Pet.roleum Gas (LPc) SysLemsABYC A-3-7O-"Recommended Practices and Standards Covering Galley Stoves',

Appendix A, Pãge 1

Appendix AStandards Incorporated by Reference and Requested Under FOIA

Office of the Federal Register, Code of Federal Regulations

For More lnl'ormation, Please Consult the Standards lncorporated By Reference DatabaseNational lnstiÌute of Standards and Technology, hrrp://srancìtrd5,qovi sibr/querVi index,cfm

-ano!,m7'!,

I ctC)C)Actorao

ABYC A-3-1993 Ga11ey StovesABYC A-7-1970 Recommended Practices and Ständards Covering Boat Heating System6ÀByc i\-16-89-Electric Navigation LightsÀtsyC A-16-9? American Boat and Yacht Councilr Inc., 3069 Solômons Island Road, Edgewäterr Mal:ylànd 21037-1416:r ÀtsyC A-16 EleÕtÏicAByC A-22.-78-"Marine CNHompressed NaturaL Gas Systems"ABYC A-22-93-Marine Comp::essed Natural Gas (cNG) SystemsABYC E-1-1972 Bonding of Direct-Current SystelnsABYC E-8-198S-Àlternating Current (AC) Electrical Systems on Boa!6AByC E-8-1994 Alternating-current (Ac) El-ectriõal Systems on BoatsÀ.tsyC E-9-198l-Recomnended P¡actices and Standards Covering Direct Current (DC) Electrical Systems on tsoatsABVC E-9-1990 Direct-ct1l:l:ent (DC) Electr.ícal Systems on BoatsÀBYC H-2-1989-Ventilation of Boats Using GasolineAByC H-2.S-"Ventilation of Boats using Gasoline-Design and construcùion" (1981)ABYC H-22-86-DC Electric Bilge Pumps operating Under 50 VoftsABYC H-24-93-{asoline Fuel SysLensÀtsvc H-24.9 (g) and (h)-"Fuel Strainers and Fuef Filters" (19?5)ABYC H-25-198l-portable Fuel Sysèems and Portable Containers for FLammable Liquids. May.I2' I981-¡,ByC H-25-1986 American Boat and Yacht Council (ÀBYC), 3069 Solomons Island Road, Edgewater, MD 21037-1416m H-25-1986-Po::tabIe FuelAByc Il-25-1994-Portable GasoÌine Fuel Systems for Flammable LiquidsABYC H-32-87-Ventilation of Boats Using nieoel FuelABYC H-33-1989-Diesel FueI SystensABYC p-1-19?3.American Boat and Yacht Council (,\BYC) P-1-?3r Safe Installation of Exhaust Systems for lropulsion and ÀuxiLrary l'1aõl

ÀByC p-1-1986-Installat-ion of Exhaust Systems for Propttlsion and Auxiliary Enginesã.ByC p-l-L993-Installation of Exhaust SysLems for Propulsion and AuxiJ-iary EnginesABYC F-4-8g-Marine Inboa¡d EnginesACGIH American Conference of Governmental Industrial llygienists (ACGIH)/ 1014 Bloadwayr Cincinnati, Ol1 45202r Threshold limit valueÀCGIH Chaptel- 3, '.LoÕal Exhaust Hoods', and Chapter 5, "Exhaust System Design Pr-.ocedul:e" ôf "Industrial Ventil-ation: À Manual of Re(

ÀCGIH's ,'Industrial- Ventifation: A l,lanual of Recommended Pr:actice" (22nd ed" 1995); orÀCI 211.1-89 Standard practice for Sefecting Proportions for Normai, Heavyweight and Mass Concl:ete Àmerican Concrete InstituteÀCI 211.2-91 Standard Practice for SeLecting Proportions for Structu::al lightweight ConcreteACI 213R-87 Guide for Structural Lightroeight Aggregate Conc¡eteACI 301-99 Specifications for Structural Concrete for BuildingsAcI 302.1R-80 Guide for Concrete Rloor and SLab constructionÀCI 304R-89 Guide for Measuring, Mixing, Transporting and PIacíng CôncreteACI 305R-77 Hot weather Concreting (Revised 1989)ÀCr 306R-78 coLd weather concreting (Revised 1988)AcI 311.4R-80 Guide for Concrete Inspection (Revised 1988)AcI 315-80 Guide for Detailing of concrete ReinforcementACI 31g-89 Building Code Requirements for Reinforced Structur:aI Plain Concrete (Revised 1992)AcI 322-72 Struclural Plain ConcreteACf 347-78 Recommended Pract-ice for Concl:ete Formwork (ReaPProved 1984)ÀCI 357R-84 Guide for the Design and Construction of Fixed Offshore Concl:ete Structures, L984¡ rêappl:oved 1997

ÀcI 504R-77 Guide to Joint Sealants for Concrete StructuresAcr 506-90 Recommended Practice for ShotcretingACI 515.1R-?9 À cuide to the Use of Water:proofing, Dampproofing, Protective and Decorative Barrier Systems for Concrete (Revised 1!ÀcI 533. LR-69 Qual"ity Standards and Tests for Precast concrete tlafi PanelsACf 531.2R-69 Sel,ection and Use of MateríaLs for Precast ConcTete WaIl PanelsÀCI 533.3R-70 Fabrication, Handling and Erection of Precast Concl:ete I^¡aLl PanelsACf Standard 318-95, euildÍng Code Reguirements for Reinforced Conc.rete (ACI 318-95) and Cor,nentary (ACI 318R-95)AFPA Design Values for Joists and Rafters 1992. AFPÀ'AFPA Span Tab]e6 for Joj.sts and Rafters-Ps-20-70r 1993, å'FPÀ'À.FllA Wood Structural Design Data, 1989, Revlsed 1992/ ÀFlA.ÀGÀ Àmerican cas Association (ÀGÀ) (1) "Purging Principles and Practicesr'¡ (3rd edition, 2001).ÀGÀ Àmerican cas Association Report No, 3: Orifice Metering of Natural- Gas and Other Related Hydrocarbon Fluidsr Part 1: Generai- Ec

AGÀ¡merican Gas Àssociation Transmission Measurement Committee Report No. 7¡ Measurement of Gas by Turbine Mete¡s (Second Revisio¡

Append¡x A, Page 2

!noÞm7rÞo<)C)

o('rID

ÀGÀ Manual- of Petroleum Measurenent Shandards, ChapLer 3-Tank Gauging. Secì:ion 1À, Standa.rd P¡actice fo¡ the Manual Gauging of petlÀGA Manual- of Petroleum MeaEurement Standards,Section 1B-standard Practice for Level Measurement of Liquíd llydrocarbons itr StationeÄGA Manual- of ?etroleum Meâsurement Standards,Section z-Standard Practice for Gaug:ng PetroLeum and Petroleun ?Toducts in Tank CarsÀGÀ Manual of Petroleum Meâsurement stàndä.rdsrSection 3-Standard t'ractice for Level- Measurement of Liquid Hydrôcarbons in StationarÀGÀ Manual of Petroleum Measurement StandardsrSectíon 4-Standard Practice for Level- Measu¡ement of Liquid Hydrocarbons on Marine VeAGA Manual, of Petroleum Measuremenl StandardsrSection 5-Standard Practice for Level- Measurement of Light Hydrocarbon Liquids OnboarAGÀ Fipelj-ne Resea¡ch Comnitlee, Project ÞR-3-805, "À t'Iodified Criterion for Evaluating the Remain:nq Strength of Corroded Þipe," {

AGA Pipeli,ne Research Comittee, rroject pR-3-805, "a Modifìed Criterion for EvaluaÈing the Remaining stl:ength of Corroded pipe,,, I

ÀGÀ Requi¡:ement6 for Ga6 connectors for connection of Fixed Àppliances for outdoor Install-ation, Park Trail-ers, ancì Manufactured (ÀAGÀ Requirements fÕr Gas cônnectôrs fÒr connection of !-ixed.Applíances for Outdoôr Install-ation, Þark Trailers, and Manufactured (tAjr Condj.tionjng contractor:s of Ame):i,ca :1.51.3 l.6th Street, Nt^I., trrlashì.ngton/ DC 20036, (202) 481-9370. Load Calcu]ation foi: Residentå.ISI Specl.fication for the Design of Cold-Formed Steel Structural Members-ÀIsT-1996.ÀrVCA 210-'l4 Air Movement and Cantrol Àssocj-a.Lion, 30 W. University Drive, Àrlington HeighLs, fL 60004:, À.\,tcA 2LO-14: Laboratory MelAMCA 210-74 Figure 12. Air l4oving and Ccnditioning Àssociation, 30 WeÊt Uníversity Drive, Arlington Heights, 1!,linois 60004.American f\ssocialion of Textile Chemists and Col-orists Test Method 79-2000. Absorbency of Bleached Textiles (reaffirmed 2000).Àmerican Àssociation of Textife chemists and colorists Test Method 118-1997, oil Repellency: Hydrocarbon Resistance Test (reaffirneAmerícan llerbal Products Àssocíatlon, Herbs of Commer:ce, 1992 ediÞionAnel:ican l:nstitute of Íinbe:: Constructicn (ÀITC) 200-83, InsÞection Manual, 1987 edition, available :tronr ATTC, 333 I\fèst H;l,mpclen Àv€ÀNSI C33,2-56 Safety SLandard for Transforner-fyFe Àrc lrlelding I"IashinesANSI C33,2-L956 Safety Standard for Transformer-Type Arc-I,lelding Vachines,ÀNSI C37,04 Rating Structure for AC High-Voltage Circuit Breakers Rated on a Syrùnetrícal Curr-ent Basis, 1979 - IEEEÀNSI c3?.12 for Àc High-Voltage circuit B¡eakers Rated on a Sl¡mmeÈ.ricai- current Basis-Specification cuide, I99lÀNSI C37.1-3 IEEE Standard for Low-Voltage ÀC Potr'er Circuit Breake.rs usecl in EnclosLrres¿ 1.990ÀNSI C37.L4 IEEE Slandard for Low-Voltage DC Powe¡ Circuit Breakers Used in Enclosures, 1992ÀNSf C63.1i-2003: "lfethods of Measurement of Rad-Lo-Noj-se Emissions fron Low-Voltage Electrical and Electronic Equipnert il Lhe RangeANSI C63.17-1998: "l4ethods of Measuremenl of the Electromagnetic and operational Compatibiiity of Unlicensed Pe¡sonal ConununicatiorÀNSI c72,1.-L972 section 4.3.1 of Household Àutomatic Electlic Sto.rage TyÞe tr^Iater Heaters, À-t¡SI c72,!-I972ÀNSI C78.1--L99t "for Fiuorescent lrânps-Rapid-Start Types-Dimensionaf and El-ectrical CharaÒteristics"ÀNSI C7B.?--1.991 "for Fluorescent Lamps-Preheat-Start Types-Dinensional and Dlectr:ical- Characteristics of Fiuorescent T,amÞrj,,ANSI C78.3-1991 "for Fl-uorescent Lamps-Instènt-Start and Cold-Cathocle Types-Dimensionai and ELectricål- Characteristics¡'ANSI C78.21-1989 "Incandescent Lamps-PÀR and R Shapes"ANSI C78,375-1991 "for Fluo¡escent Lamps-Guide for Eleclrical l.{easurementÊ"ANSI C79,L-L994 "NonencLatlrre for üIass Buibs-Intended for Use wiÈh Electric Lamps'ANSI C81.L0-1976 Specifications for Electric l,amp Bases and Hoiders-Screw-She1i TypesÀNSI C82,3-1983 "for Reference Ballasts for Ffuorescent Lamps"ÀNSf CSD-1-1982 with Adclenila CSD-]a-1984r Controls and Safety Devices for ÀutomaticalJ-y lired BoiLers/ November 15r 1984 ASÞ18ÀNSI D1.4-92 Structural Welding Code-Reinforcing Sì:eel. ÀNST/AWS D1.4-92, f992.ANSI D1.9-95 Bridge !üeiding Code, ANSI/AÀSHÎO/ÀI¡¡S Dl.5-95, AASHTO.ANSI H23,1-70 Seaml-ess copper ÍIater Tube Specificatj.onÀNSf H23.1-1970 (ASTM 888:69) Specification for Seamless Copper Water Tube¡ANSI H38.7-69 Specifícation for Aluminun Aìloy Seamless Pipe and Seamless Extruded TubeÀNSI IT9,2.-L99I Imaging Meclia-Photographic Processed Fi-Lms, PLates, and Papers-FiJ.ing EncLosures and Stol:age Containers.ANSI J6.6-7I Standard Specification for Rubber lnsulating GlovesANSI Xl3.1-67 rdentification of Gas Ma6k CanÍÊter6ÀNSI X13,).-L967. Identification of cas-Mask canj.sters,ÀNSI K6I.L American Nationaf StandaÌd for the Storage and Handiing of Ànhydrous À.Ìmonia,ÀNSI K6I.l Àmerican National- Standard Fundamentals Governing the Design and Operation of Locaf Exhaust Systens | 29.2-1960ÀNSI K61,J.-66 Safety Requirements for the Storage ancl Handling of Ànhydrous À¡mnoniaÀNSI N13.1-1969 "Guide to Satnpl-ìng Àirbcrne Radioactive Materials in Nuclea¡ Facilj-ties." IBR approved for 61.93(b)(2)(ii) and 6t,lANSI Nl4.L Uranium llexafl-uoride-Packaging for fr.anBporl, I97I, I982, 1987 | L990t 1995 and 2001 EditionsANSI 01.L-'54 (R 61) Safety Code for Woodh'orkinq MachineryÀNSI lerformance Requirements for Àir Àdmittance Valves for Plumbing Drainage Systems, FixtuÌe and ts¡anch Devices-ÀSsE St.andard #lIÀNSI PLunbing Fixtllre Setting Compound-TTF f5364-1975.ÀNSI PLunl¡ing Fixtures ( General Specif ications )-FS WW-P-S418/cEN-19 I 0,ÀNSI 51.4-71" (R 76¡ Specification for Sound Level llelers

Appendix A, Page 3

-(¡

7JoÞnln)r

I g)c)oc)o)c)

ÀNSI S1.4-19g3 Specification for Sound Level Meters, .\merican National Standa¡ds Institub.e, s1.4-1983, incorporation by relerence ¿

ANSI S1,4-7gg3 Specification for sound Level MeterE, American Natíonal standards InEtitute, s1'4-1983, incorporalion by refere¡ce ¿

ÀNSI S1.4-1983 Specification for Sound ],evel l,leters, includj.ng Amendment S1.44-1985.ÀNSI Sl,l1-71 (R 76) Specification fôr Octave, Hal-f-Octave and Third-Octave Band Filter SetsANSI Sl.6-69 Specifications for Audioñeter.sANSI S3 -6-196g Àmerican National Slandard Specification for Audiometers, ANST S3.6-L969ÀNSI 53.Zz-Lgg6 - NSI s3.22-1996 '.specificalion of Hearing Aid Characteristics," ANSI s3.22-1'996 IÀSA 70-1996¡ (Revision of ÀNsr 5

ANSI S12.13 Part I, Peïformance Requirement6/ combuÊtible Gas Detector6, 1986

t\NsI T1.506-19g0 l\merican National standard for Telecornmunj.cations-Netr,¡ork Performance-Trans¡nission specifications for switched Exc

ANSI Z-124.9 Plastic Urinai- Fixtures' 1994.ANs.t u4-1.-68 Requirements for Sanitatj.on in Pl.aces of EmpJoymentÀNSI 29.1-51 Safety Code fo:: ventilation and operation of open surface TanksANSI 29,1-71 practices for VenLilation and Operation of Open-Surface TanksANST 29.1-1971 Practices for ventilation and operation of open-surface Tanks,.âNSI 29.2-60 Fundamentals Governing the Design and Operation of Local Exhaust SystemsANSÌ 29.2-79 Fundamentals Governing the Design and Operation of Local Exhaust SystemsÀNSI Z9 -Z-Ig7g fundamentals Governing the Design and Oper:ation of Local Exhaust Systems;ANSI 212.2-Lg62 (Rl.96g) (Code for the prevention of Dust Explosion in woodworking and wood Fl-ou:: Manufacturing Pl-ants),ÀNSI 212 .72-68 Standa¡d for the Prevention of sulfur Fires and ExpìosionsANSI 212.12-1968' Prevention of Sulfur Firee and Explosions,ÀNSI u 12,20-62 (R 69) code for the prevention of Dust Explosions in hlood!.'orking and wood Fl-our Manufactuling PiantsANSI 22I.1-2000 Household Cooking Gas Appliances-ANSI 227'7-2000'ANsI 221.1-2000. Household Cooking Gas Ä.ppliances-.ã.NSI 221.5.1 Gas Clothes Dryers Vol-ume 1, Type 1 Clothes Dryers-ÀNsf ?'2L.5.7-/cSA' 7.1-M99-1999 with Àddendum 221.5.1a-1999.I\NSI 22I.10.1-199g Gas l^Iater Heaters-Volume 1, Storage Water Heaters rvith lnput Ratings of 75,000 BTU per hour or Less-ÀNSI zZI-lO.ANS] 221.10.1-199g r,¡ith Addendw 221.10,1a-2000. Ga6 l{ater Heaters-volume 1¡ Storage l'¡ater HeaterË r,¿ith Input Ralings of 75'000 BTl.

ANSI 221.10,3-1998 CSA 4.3-M98. and its Àddenda, ÀNSI 221'10'3a-2000/ csÀ 4.3a-M00,ÀNSI 221 15-1997 Manually Operated Gas Valves for Appliances, Àppliances Connector Valvesr and Hose End ValvesANSI 22L15-1997 Manually operated Gas va.lvesÀNSI 221,15-1997 Manually Operaled Gas Valves for Àppliances, Àppliances Connector VaLves, and Ilose End ValvesÀNSr z2l.IS/CGA, g,I-Mg7-lgg1. Manually operated Gas Valves for Àppliances, Àppliance Connector Valves and Hose End valves-ANST 221.15/CGA Manually Ope::ated Gas Valves for Appliances, AppJ-iance Connector valves and Hose End valves-ANSl 22L.15/CGÀ 9.1-M9;ANsr 221,19-1990 Refrigãrators using cas Fuel-ANSr z2!.19-1990. r,¡ith Addendurn ANsr 221'194-1992 a\d zzI.19b-1995'ANsr 221.19-1990 Refïi;erators using GaB Fuel--ÀNsI 221.I9-1990, etith Addendum ÀNsr 221'l9a-L992 and 221-19b-1995-ÀNSt 221.20 Automatic Gas tgnition sy6tem6 and components-ÀNsI 22I.20 with Àddendull z2)".204-2000-ÀNSI 221.20 Àutomatic Gas Ignition Systems and Components-ÀNsI Z2I'20 t/ith Addendum 221'20a-2000'ANsr 221'21 Autornatic valves for Gas 'Appriances-ÀÑsf zzL'2r/csA 6'5-2000'ANSI 221.21ICSA 6-5-2000, Automatic valves for GaÊ Àpptiances-AN9I 227.2I/CS¡- 6'5-2000.ANSI 221,22-79g6 Relief Valves and Autonatic Gas Shutoff Dévj-ces for Hot water Supply Systems-ÀNsl zzL'22-1986t ÍIith Addendum zzl.iÀNSI z2l.22-1986 Relief Valves and Àutomatic Gas Shutoff Devices for Hot water Supply Systems-ÀNsI zZI'22-1986, with Àddendum z2l'iANSI 221.22/CSA 4.4-Mgg Refief valves and Àutomatic Gas shutoff Devices for Hot wat-er: suÞply systems-ANsl 22I.22/cs¡' 4.4-M99t 1999.

ÀNSI 221.22/Cs'A.4.4-Mgg I :.9gg., ReJ-ief vafves and Àutomatic Gas shutoff Devices for Hot water suPPLy systems-ÀNSI 221.23-1989 Gas Appliance Thermostats-ANSr Z2I.Z3-L989, v¡ith Àddendum Z2I'23a-L99I'ANSI 22I.23-19g9 GaE Appliance Thermo6tat6-ANsI ZZl.23-L999, v¡ith Addendum 22I'23a-L99I'ANSI 221,24 Connectors for Gas Appliances-ÀNsI ZzL24/CGA 6,10-M97-1997'ANSI 221,24/cGA 6'10-M97-1997' Connectors for Gas Àppliances-'ANST 221.30-64 Requirements for Gas Àppliances and Gas Piping rnstallationsANSI zZl.30-1964 American Nationaf Standard Requirements for the InstaLlation of Gas AppJ.iances and Gas Pipinq zZI'30-f964ÀNSI 221.40.1 Gas Fired Àbsorption Summer: Àir Conditioning ApPliances-ANSI 221.40'1lCGÀ 2'9I-M961996.ANSI 221 .40.I/cG¡. 2,91-M951996. Gas Fired Absorption Sumner Air Conditioning Applíances-ANSI Z2t,41,-!g9O Ga6-fired Central Furnaces (Except Direct Vent System central Furnaces)-ANSI 221',47-7990 l¡ilh Àddendum 221 '47a-l9tÀNSI 221.47-1990 with Àddendum 221,47a-I990 and Z2I.47b-I992. Gas-FiÌed Central Furnaces (Except Direct vent sysLem centraL Furnac€

ÀNSI 221,47-lgg} "Gâs-Fired Central Furnaces/" IBR approved for S431'76'ÀNSI 221.56-1994 "Gas-Fired Pool Heaters," section 2'9'ÀNSI 224 .22-57 Method of Measurernent of ReaI-Ear Attenuation of Ea¡ Protectol:s at Threshold

Appendix A, Page 4

!nomnr>ooo(f

o)J

ANSI 226.t-Lg?7 (including 1980 Supplement), Safety Code fo¡ Safety Glazing Materials for Glazing l"totor Vehicles operarting on ¡andANSI 233.1-61- Installation of Blower and Exhaust Sys-LemE for Du6t¡ Stock, and Vapor Removai or ConveyingÀNSI 233.L-66 Install^ation of Blower ancl Exhaust Sy6bems for Dust, Stock, and Vapor Removal or conveyingÀNSI 233.1-1961. Installation ôf Hi-ower and Exhaust Systems fôr Dust, Stóckr and Vapor lì.emoval- or Conveying,ANSI 214.1*1991 Third-Party Cer:tification Programs for Productsr Processes, and SertftcesÀNSI 234,1-1987 À¡nerican National Standard for Certification, Third-Party Certification ProgramÀNSI 234.1-1993 Third-Part-y Certification Programs fo¡ P¡oducts, Processes, and Services"ANSI 235.1-68 Specification6 for Accident Prevention SigneÀñSI Z4l-91. Pe.rsonal Protection-Protective FootwearÀNSt 241-1983-Àmerican NatiÕnal- Standard fôr personal Prôtection-Þrotective Fôotsreår.ANST 241-199.1. "Ànericañ National- Standard f or Per:son¿rl Pr:otection-P::otect-j.ve Footweal:r,'ÀNSI 241.1-1967 Americàn Natiorral Stand¿rrd for Men's Safety-Toe lootwear,ANSf 249.1 "Safety in Welding' Cutting and À1lied Processes," sections 4,3 and E4.3 (1999) (incorporated by r-eference, see SgSl.ZZlANSI 253.1-67 Safety Color Code for Marking Physical Hazards and the Identification of Certaín EquipmentÀNSf 253.1-1953.American National standard Safety tolor Code fot Marking Physical Hazards and the ldentificalion of Certain EquipmeÀNSI 254.1-1963 Àmeridan National Standard Safety Standard for Non-Medical X-ray and Sealed Gamma-Ray Sôurces, ÀNSI 254.1-1963ANSI 287.1-1968 Practice of occupational ancì Educational Eye and Face ProtectionANSI 287.1-1979 P¡:actice for Occupational and Educational Eye and Face Protèction, 1979ÀNSI 287..1-1989 "American National Slanclard P¡actice for Occupational and Educational- Eye and Face proLecLion,,'ANSI 288'2 "American National Standard for Respiratory Protection," (1992) (incorporated by reference, 6ee SB5t,27).ÀNSI 288,2-69 Practices for Respiratory lrotectionÀNSI 288.2-1969 "Amel:ican National Stanrlards Practices for Respiratôry lrïotection ÀNSI 288,2-Ig69ANST 288.2-L99? Àmerican National, Standard for Respiratory ProtectionANSI U 88.:¿-1980-P¡:actices for Respiratory ProtectionÄNSI 289.1-69 SafeLy Requil:ements for l¡rdustrial Eead Protection, 1969ANSI 289.1-86 Protective lleadwear for lndustrial ttorkers RequirementsÀNSI 289.1-1969 Safety Requit'ement for IndustriaL Head pr-otectionANSI 289..i-I981-Safety Requirements for IndùstriaL Head protection.ANSI 289.1-f986 Personnef ?Totection-Prolective Headrvear for Industrial glor:kers-RequJ.rernents¿'NSI 289.1-1959 "American National- Stanclard Safety Requirements for Industrial Head Protection,,,ÀNSI 289':L-1986 "American National Slanrlard for Personnel Protection-Protective Headv¡e¿rr for Indus.Lrial krorkers-RequiremenÈs,,,ANSI 289.;¿-71 Safety Requirements fo¡ Industrial Protective HelmetÊ for Elect¡j-ca1 Workers, C1a6s BANSI 289'1-1986 "Personnel Protection-?rotective lleaclwear for fndustrial Workers-Requ.irements,'ÀNsI 297'1-1984 safety l'erformance specifications and Methôds of Test foï safety Giazing Materials Used in tsuil-dings, ÀNsI z9?.I-1!ANSI 297.1-I984 "Safety Peïformance Specifications and t4ethods of Test for safety Glazlng Materials Used in Buitdings.,'ANSI 297.1-1984. såfety Pe::formance Specifications and Methods of Test for Safety clàzìng Materi.al-s Use¿t in Building-ANSI 2124.1-1987. Plastic Bathtub Units wi-th Addenda Z124.Ia-1990 and 2L24.16-1991-ANSI 2124.1a-1990 Plastic Bathtub Units with Addenda ZI24.7a-r990 arld 2124.16-1991-ANsr 2L24.1-1987.ANSÏ 2124 '2-7987. Plastic Shower Receptors ancl Shower StaLi.s r¡ith Addendum 21.24.2a-1990- ANSI 2124,Z-7987.ÀNSI 2124.2a-1990 Plastic Shor+er ReceptÕrs and Shower StalLs with Àddenduîn zI24.2a-I990-À*\,5I z)-24.2-19S?.AN*SI 2124. 3-1986. Plastic l,avat-ories r,¡ith Addendum 2124. 3a-I990-ÀNSI 2124.3a-1990 Plastic Lavatories wlth Àddendum Z!24.3a-199o-ÀNSt 3,I24.3-1986.ÀNSI 2124.4-1986. Plastic q¡ater CloseEs, Bo\'/ls, and Tanks with Addenda 2724,4a-I990- AÌ)SI 2124.4-1986.ANSI 2124.4a-1990 PlaË¿ic water CLo6ets, Bowls, and Tanks \,¡ith Addenda ZL24.4a-199o-ANSI 2124.4-1985.ÀNSI 2124,5 Pl-astiõ Toilet (Water Closets) Seats, 1997,ÀNSI 2124.5-1989 American National Standard for Plastic Toifet Seats (tJater closet Seats)ÀNSI 2124.7 Prefabricated Plastic Spa Shellst 1997.ÀNSf 2124,9 Plastic UrinaL Fixtures, 1994.ÀNSI 2136,1 "Safe Use of.Lasets," (2000¡ (incorporated by reference, see S8SI.27),ANSI 2245,2-!992 ("Arnerican National Standard fot Refuse Collection, Processing, and DiÊposal Equipment-Stationàry Co:r,pactors-SafetÀNSI 2245'5-L990 ("Àmerlcan National Standard for Refuse collection, Froeessing, and DLsposal-Baling Equipment-Safety Requirements.llNsr/AÀMÀ 101-1988 Voluntar:y specificatj.ons for Àluminum lrime tr'ùindosrs and Sliding cl-ass Dool:sANSI/AÀì'1-A 1002.10-L983 Voluntary Specificat-ions for Àluminum Insulating Storn Products foï lrlindows and Slj.,ling class Doorså.À1SI/AÀMÀ IL02.7-I989 Voluntary Specifications for ÄIuminum Storm DoorsÃ.llsf/AÀMA 1402-1986 Standa¡d Specifications for Àluminum Siding, Soffit and Fascia (ÀNSI Appr-oved 1989)

Appendix A, Page 5

'u7Jc)ÞmnÞ

Ic)c)oc)o)h)

ÀNSï/AÄMÀ/NI.IWDA 101/I .S,Z-g7 Voluntary Specifications lo¡ ÀIuminun, Vinyl (PVC) and !,rood ltrindov¡s and Glass Doo¡s-ANSI/ÀÀMA/NVIT'¡DÀ lC

ANsr/Acr 214-17 Recommended practice for Evaluation of slrength Test Results of concrete (Reapproved 1983)

ÄNSï/ÄFpÀ NÐS-20001 National Design specifications for wood construction, 2001 EdiLion, with supplement, Ðe6ígn VaLues fof wood cor

ÀNSI/AGA zZL.22-86 Refief Valves and Àutomatic Shutoff Devices fôr Hôt Water SuPpty Systeinsr March 28t 198663-25-3

ANSI/AÍlA 4135.4-1982 Basíc Hatdboard (Reaffirmed 1988)ÀNSI/AHA 4135.6-1990 Hardboard SidinqANSr/AHA 4194.1-1985 CelluLosic Fiber BoardANSI/AIIAM DIl¡_lÀNsr/I\HAM HRF-L-2004 ',Energyt ?erfornance and capacity of Household Refrigerators, Refriqerator-Freezers and Freezers"'_ ÀNSI/AIIM MSI-1995 August 8t Lgg6t Standard Recomnrênded Practice fÕr Alphanumeric computer-outPut MicrÔforns-operational PråctiõÉ

- ÀNSï/AT.IM MS5-1 992 neóe;nber 21 , 1992, Standard fotr Tnfo]:matjon and Inage MaDôgeÌnent-Mjcrofi.che-ÀNSr/ArrM MSL4-1996 Àugust B, 19t6, stanclarcl Recommendecl Practice-specifications for 16mm and 3s¡Tur RorL Microfilm-

- AN5I/ÀIrM Ms19-1993 Ãugust 1g, 1993. SÈandard Recom¡nended P¡actice-IdenLification of Ì4icroforlns.

- ANSï/AIIM MS23-1998 Juie 2, 1998, Standard Recornmended Practice-Production' Inspection' and Quality A6surance of First-Generatío¡- ÀNSr/ArrM MS32-L996 February 16t Lgg6, Standard Recommended Practice-MicrorecordJ.ng of Engineering source Ðocuments on 35mrn Micrc

- ÀNSr/ÀrrM MS41-1996 Jury 161 1996, Dimensions of unitized Mic¡ofiIm carriers and Àpertures (ÀPertur-e, camera, copy and rmage carc

- ÀNSr/ArrM Ms43-199g ,¡unË z¡ 199g. standard Recommendecl Practice-operational Procedures-rnspection and Oualíty controi of Duplicaì

- ÀNSr/ArrM MS45-1gg0 January 22t rggo. Recommencìecì P::actice fol: rnsFection of stored silve):-Gelatin Mj-croforns for Evidence of Det

ÀNSI/AISC 360-05 Specification for Structural Steel- BuildingsANsï/American soci¿ty of Heatingr Refrigerat,j.ng and Air-conditioning Engíneers (ASHRÀE) standard 29-1988 (FÀ 2005)f "MethodË of leE

ANSI/APA L-1984 Mosaic-Parquet Hardboard SIat FlooringANSI/ARI ZI0/Z4O-B} Unitary Ait-Conditioning and Air-Sou¡ce Heat Pump Equipment-ÀNSI/ARI 2I0/240-89'ANSI/ARI 210/240-89. Unila;y Air-conditioníng and ¡'iÏ-source Heat PL¡mp Bquipnent-ÀNSI/AS¡IRÀE L5-94 Safety cocle for Mechanical RefrigeratiÕnANSI/ÀSIIRÀE 34-?8-Nunber Designat:ion of RefrìgeranLsr approved 1978'ANST/ASHRÄE 55-LggZ Therrnal Environmental CondÍtions for Human Occupancy'ÀNSI/ASHRAE 62-19gg Ventilation for Acceptable Indoor' ÀiÏ Quality'ÀNSr/ASHRÀE 103-r993 ,.Methods of Testing for Annual FueI utilization Efficiency of Residential- centraf Eurnaces and Boilers"' (witÌÀNSI/ASHRAD Standaïd 32.1-2004,,,Methodi of Testing for Rating Vending Machines for BottÌed, Canned, ancl Other Seaied Beverages."

ÀNSI/ÀSHRAE/IESNÀ Standard g0,1-2004, Energy Standa¡d for Buildings Excêpt Loç,¡-Rise Residential Buildings . January 2004, Ànerican

ÀNsï/ÀsME 05,2-r9gJ.âmerican National stanãard for wood Products-structural Glued La¡ninated Timber for utiiity structures, availabl

- ANsr/AsME A10,14-l-97s-Requirements for safety Belts, Harnes6eEr Lanyards. Lifelines, and Drop Lines for conFtruction and rnduÊtrjANSI/ASME À10,14-1g91 Requ.irements for safety Belts, Harnesses, Lanyards and LifeLines for construction and Demolition use, 1991

ANSI/ÀSME À11.1-1965 (R 70) Practice fo¡ Industrial LightingANSI/ASì4E ÀI1.1-1965 (R-1970). Practíce for IndustTiaf l'ighting¡ÀNSf/ÀSME À13.1-1956 Àrnerican National Standard Sêheme for the Identj.flcation of Piping Systemsr ÀNSI À13'1-l-956

ANSI/ASME À14.1-1968 Safety Code for Portable úlood Ladders, Supplemented by ÀNSI Al-4.Ia-17ÀNSI/ASME À,14.1-1975 safety RequirementE for Portable wood Ladders

- ANSI/ASME A14,1-1990 Safety Requirements for PortabLe hlood LaddersÀNSI/ÀSME A14.2-1956 Safety Code for Portab.Ie Metal- Ladders, Supplemented by ANsI À14.2a-?1ÀNSr/ASME AL4-2-Ig72 Safety Requirement-s for Portable Metal Ladders

-ÀNsr/ÀSMEA'14.2-IggoSãfetyRequirementsforPortableMetafLaddersÀNSI/ASME A14.3-1g56 emerican t¡ational standard safety code for lixed Ladders' ANsl Al-4.3-1956

ANSI/ASME A14,5-1992 Safety RequirementE for Portable Reinforced Flastic LaddersÀNSI/ÀSME A17.1-1965 Safety code for Elevators, Dumbwaíters and Moving waLks, Including Supplements, 417.14 (1967)¡ À17,1b (1968);

ÀN6r/ASME A17.1-1984 inctuãing supplements A 17,1a and ts-1985-safety code for Elevatórs and Escalators

- ANSI/ASME 417.1-1993 Safety code for Elevators and Escalators' 1993

ANSI/ASME À12.1--87 Safety Code for Elevatol:s and EscaLators Including the À17'lb-89 Àddenda

ANSr/ASI"IE À17.1-1965 Safåty code for Elevator:s, Dumbwaiters, and Moving gJalks' Ar?.1-1965, inciuding Supplements À17.1a-l967, Ar7'lANSI/ASME At7.1A-1994 eddeida to ANSr/ASME A17.1, safety code for ElevatorE and Escalators ¡including Erratar 1995), 1994

ÀNSr/ASME ALl,2_:'36D including suppelements AI7.2a-Lg65 and A17 '2b-I967. Fractice for the rnspection of El'evators (rnspector's Manl

ANSI/AS¡4E À90.1-1959 Amet:ican National Safety Standard for ManliftsÀNSI/ÄSME Ag2.?-7g69 "Vehicle Mounted Elevaling and Rotating I'¡oIk PIätforms,"ÀNSI/ÀSME.à10g,1À-92 specifications for InstaLlation of ceramic Tiie, in the t{et Set Method with Portland cement Mo¡tar

- ANST/AsttE A112.1.2-7ggI Air: Gaps in rlumbing syslems-AsME À112.1.2-1991.

Append¡x A, Page 6

TnomnrÞooo(f

o,(d

ÄÀ1SI/ASME À112.1.2-L99! - Àir Gaps in Plurnbing Systems-- ÀNST/AsME

^172,4.1-1993 l¡tater Heater Relief Valve Drain Tubes-ASME A112,4.1-1993,

ANSI/ASI{E À112.4.1-1993. water Heater Relief vaLve Drain Tubes-- ÀNSI/ÀS¡lE

^rr2.4.3-L999 Plastic Fittings for Connecting Waler Closets to the Sanitary Drainage sysLern-Àst'tE À112.4.1-L999.

ANST/Ã.SME À112.4.3-1999, Pl-astic Fíttings for Connecling l.late.r C.Icsets to the Sanit.at:y Dt:ainage SystelItsÃNST/ASME 4112. l4 .1-1975 Backflor.¡ Valves-.ÀNSI/ASME À'112. I I . 1M-19 89 Plurnbing Fixture Fittings-ÀSME/ANSI À1 12 . 1 8 . 1M-19 89 .

ANST/ASME 4112. 18 .1M-1989 . Plurnbing Fixture Fittíngs-- ANSI/ÀsME A112.18.1M-1996 "Plurnbing Fixrure Fittings. "ÀNSI/ASME À112.18.IM89 PLunìbing Fixture FittingsANSI/AS¡4Eì Al 12.18.114-1996 Performance Requirements for Backf].ow Protectjon Devices and Systems in plDmbing Fixtut:e Fittj-ngs-ÀSt'fE AlÀNSI/.àSME À112.18.314-1996. Performance Requirements for Backflow Protection Devices and Systeíns in PJ.umbing Fixture ¡ittings-- ANSI/ASI'IE 4112.18.6-1999. Front Fog Lanp, SAE J583, AugusL 2004, incorporation by reference approved for 5393.24(b\.- ANSI/ASI{E 4112.18,7-I999 Deck Mounted Bath/Sho!¡er Transfer valveE with Integral Backflov¡ P¡otectio¡-ASME 4112.18.7-1999.À.NSI/ASME À112.19.114-1987 Enameled Cast Iron Piumbing Fixtures-AIISI/ÀSME A112.19.lM-1987,ÀNSI/ASME À112.19.1M-1987. Enameled Cast Iron Plumbing ¡ixtures-ANSI/ÀSME Àr12.19.2(M)-1990 Vitreous Chjna Pfumbíng Fixtur:es-ANSI/ÄSME A1,12.19.2(M)-1990.ANSI/ÀSME À112. 19.2(M)-1990. Vitreous China Plumbing Fixtures-ÀNSI/ASME À112.19.314-1987 Stainless Steel Plumbj.ng FixLures (Designed for Residential Use)-ANSI/ÀSME 4112.19.3M-198?.ANSI/ASME 4r12.19,31,1-1987. Stain1es6 Steel Plumbing FixtureE (Designed for Residential Use)-ANSI/ASì4E À112.19.4(M)-l-984 Porcelain Enameled Formed Steel P1u¡nbing Fixtures-ÀNsI/ÀSME A112,1.9,4(M)-1984,ÀNSI/ASME ÀI12.19,4(M)-I984.. Porcelain Ename]ed FÒrmed Stee1 Plu¡bing Fixtures-ANSI/AS¡48 À112.I9 .5-1979. Trim for water Closet, Bor,,rJ-s, Tanks, and Urinal-s-ÀNSI/ASME À112.19,6-1995 Hydraulic Pe¡formance Requirements for Water Cl-osets and Urinals, ASIIE À112.19.6-1995.ANSI/ASME À112.19.6-1995 "HydrauLic RequiremenLs fo¡ trlate¡ Closets and Urinafs."ANSI/ASME À112.19.6-1995. ÊIydraulic Pe¡formance RequirementE for ì{ater Closets and Urinals,ÀNSr/ASME À112.19.7M-1987 ú/hirlpool Bathtub Àpp1ì.ances-ASME/ÀNSI A112,1-9,7M-1987.ÀNSI/ASME À112. 19 ,714-1987. Whirlpool tsathtub Àppliances-ÀNSI/ASIIE 4112.19.8M-1989 Suction Fíttings for Use in Swirnming Pocls, Wading Pools, Späs¿ Hot Tubs, and Whirtpool Bathtub ÀpÞliarcr:ÀNSI/ASME ÀI12.19,8M-1989. Suction Fittings for Use j-n Swimming ?ools, Wading Poo1s, Spas¡ Hot Tubs, and llhirJ,poot Bathtul¡ Àpp-iancANSI/ÀSME À112. 19 .9M-1991 Àlon-Vitreous Ceramic Plumbing Fixtures-AslqE 4112. I9 .9M-1991.ÀNST/ASME À112. 19. 914-1991. Non-vitreous Ceramic Plunbing Fixtures-ÀNSI/ASME À112,21,3M-1985 Hydrants for Utiiity and Maintenance Use-ANSI/ÀSME A112,21.3t"1-1985.ÀNSI/ÀSYIE ÀI12.2I.314-1985. Hydrants for Utility and Maj-ntenance Use-ÀNSI/À,SME À112.25.1-1969 i{ater Hammer ÀÛesters-À.\SÏ A112.26.1-1969 (R 1975).ÀNSI/ASME À119. 19 .10-1994 Duaf FIush Device6 for tr'later CLosets-ÀSyE À119. 19.10-1994.ÀNSI/ASME À119.19.10-1994. Dual Flush Devices for waLer Closets-ANSI/ASME 4120.1-70 Säfery Code for Powered Platforms for Exterior Buil-ding Maj-ntenanceANSI/ASME À135, 4-1995 Basic Hardboard-ANsÏ/AHA A135. 4-1995.ÀNSI/ASI4E ÀI35.5-1995 P¡efj,nished Hardboard Paneling-ANSI/ÀHÀ À135.5-1995.ÀNSr/ASME À135. 6-1998 Hardboard Siding-ANsr/AHÀ À135. 6-1998.ÀNSI/ASME À137.1-1988 Specifications for Ceramlc TiIeÀNSI/ASME Ä.f90.1-1992 For r¿¡ood producEs-Strucbural Glued LaminateC Timbe::-ÀNSI,/ÀITC À190.1-1992.ANSÏ/ASÌ4E A208, r-1999 Particleboard-ANsr A208. 1-1999.ÀNSr/ASME À208. 1-1989 Wood Particl-eboardÀNSI/ASÌ4E 81.1-82 Unified Inch Screw Thleads (UN and UNR ThIead ¡crTrL)ANSr/AS¡4E Bt.20.L-1983 Pipe Threads, General PurÞose (Inch)-ANSr/ASME 8I.20.1-1983.ANSI/ASME 81.20.1-1983. Pipe Th¡eads, General Purpose (Inch)-ANSI/ASI,IE 81,20,3-76 (reaffirmed 1982) Dry6eal Pipe Threads (rnch)ÀNsr/ASME 87.1-1964 Safety Code for lhe U6e, Care, and Protection of Àbrasive wheeLsÀNsI/ASME B7.L-l970 Ã"1lerj-cân NatiônaL Standaxd Safety L'ode for the Use, care, and Protection of Abrasive l¡¿heeLs, ^ANSI 87.1-1970ÀNSI/ASME 87.1-1970 Safety Code for the Use, Care, and Irrotection of Abtasive WheelsÀNSI/ASME 8I5.1-1953 (R 1958); Safety Code for Mechanical- Por.¡er Ttansmission ÀÞparatus,ÀNSI/ASì4E 816.1-1975 Cast Iron Flanges and Flanged Fj-ttings, Class 25 | L25t 250 and 000À.NSI/ASME 816,1-1998 "cast rron Pipe Fianges and Flanged Fittings,"

Appendix A, Page 7

1'71c)ÞmnÞ

I

c)ctc)c)olå¡

ANSI/ASMEANS T /ASMEÀNSI /ÀS¡'IEÀNS I /ASI'TEÀNS T /ÀSMEANST /ASMEANSI/ASMEANSI /ASMEITNSI /A5¡48å.NS I /ASMEANSI /ASMEÀNSI/ÀSMEÀNSI /ASMEANS T /ASMEANS I /ASMEÀNS I /ÀSMEANSI /ASMEå,NS T /ASMEANS I /ASMEANS I /ASMEÀNS r /AS¡4EÀNSI /AS¡,IEANST /ASI4EÀNSI /ÀSMEANS T /ASMEANS T /ASMEANS I /ASMEÀNSI/ÀS¡48ÀNSr/ASl'18àNS I /ASMEÀNSI/ASI4EANST/ASMEÀNSf/ASMEANS I /ASMEÀNSI/ASI"IEANS I /ASMEANS I /ASMEANS T /ASMEÀNSI /ASMEÀNS I /ASMEANS T /ASI4EANST/ÀSMEANSr/ÀS1'1EANSI/ASMEANST/ASMEÀNSI/ASMEÀNS I /ASMEANSf/ASMEANSI/ASMEANST/ÀSMEANSI /ASMEÀNSI/ÀSI4EANST/ASI'IEÀNSr/ÀSMEÀNSf/ÀsME

816.3-1985 Malleable Iron Threaded Fittings, Classes 150 and 300816. 3-1992 l4alleable rron Threaded Fittings-ANSI/ASME 816' 3-1992.816.3-1992. MalLeable Iron Threaded Fittinqs-816,4-1985 cast Iron Threaded Fittings, classes 125 and 250816 -4-7ggT Gray rr:on Th.readed Fittings-ANSI/ÀSME 816.4-1992 -

816.4-1992. Gray Iron Threaded Fittings-816.5-1981 Pipe Flanges and Flanged Fittings816.5-1988 pipe Flanges and Flanged FittingÊ 1988, including 1992 Addenda and Errata816.5-1977 steel Pipe llanges, Flanged Fittings816.5-2003 (Octôber 2004) "FiPe Ffanges and Flanged Fittings."BI6 - 5-200J P,i.pe Fl,anges and Flanged Fj ttj.ngs816.9-1985 Factory-Made Íürought Steel Buttweiding Fittings816.9-2003 (February 2004) "Factory-Made Wrought Steel Butt Welding Fittings"816.1-0-1986 Face-to-Face and End-to-End Dimensions of Ferrous Valves816.11-1980 Forged Steel Fittings' Socket-Welding and Threaded816.14-1983 Fe.rrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads816.15-1985 Cast Bronze Threaded Fíttings' Ciasses 125 and 250816.15-1985 cast Bronze Threaded Fittings, Classes 125 and 250-816.18-1984 ca6t coppeÌ Àl]oy Solde¡ Joint PreESure Filtings816,20-1g73 Ring-Joint caEket6 and Grooves for Steel Pipe Fl-anqeB VIII, Division I' PreËÊul:e VeEËe1Ë. 1986 vlith addenda8L6.22-7g|g Wrought Copper and Copper À1loy Solder-Joint Pr:essure Fj.tting-ASME/ANSI B16'22-L989'8L6.22-Ig8g. Wrought Copper and Copper Alloy soldelr-Joint Preasure Frtting-8t6.23-7992 Cast Copper Alloy Solder:-Joint Drainage Fittings-DhÌV-ÀSME 816.23-1992.816.23-1992 Cast Copper ÀIloy Soldel-Joint Drainage Fittings-DWV-.816.24-1979 Bronze Pipe Flanges and Flanged Fittings, Class 150 and 300

816.25-1986 Buttvreldíng Ends816.26-1988 cast Copper Àlloy Fittings for Fiared copper Tubes-ASME/ÀNSI 816'26-1988.816.26-198s cast copper ÀItoy Iittings for Fla¡ed copper Tubes-.8I.6.28-1986 Wrought Steel Buttweìding Short Radius Elboe¡s and Retur:ns816.29-1986 l{rought Coppeï and l^lrought Copper Àlloy Solder-Joint Ðrainage Fittings-DW-ASME/ÀNSI 816.29-1986.BL6.29-7986. I^Irought Copper and Wrought Copper Al-Ioy Solder-Joint Drainage Fitlings-DwV-816.31 Non-Ferrous Flanges, 1971B16.34-88 Valves-Flanged, Threaded and Welding End8L6.42-87 Ductil-e Iron Pipe Flanges and Flanged Fittings. Classes 150 and 300

818.2.1-81 Square and Hex Bol-ts and Screws¡ Inch Series818,2.2-87 Sguare and Hex NutsEzO.I-1957 Safety Code for Conveyors, Cableways, and Related EquipnenL'830.2-43 (R 52) safety code for Cranes, Derricks, and HoiEtE830,2.0_1967 Àmerican National Standard Safety Code fo.r- Overhead and Gantry Cranesr ANSI 830'2'0-1967830.5-1968 Ameliôan National Standard Safety Code for Crawler, Locomotive' and Truck Cl:anes' ÀNSI 830.5-1968830-6-1969 AmeTican Nationaf Standard Safety Code for Derricks, ANSI 830.6-L969831.1-1955 coÉ{e for Pressure Piping831.1-1986{ode fo¡ Pressure Piping' Pot¡e¡ Piping831.1-1967 Code for Pressure Piping, ANSI 831.7-I967 with addenda 831.1-1969831,1-200l-power pipinq, and B3L,l-a-2002-,\ddenda to ÀSME 831.1-2001 (incorporated by referencef see S851'27);83I.1,0-7967 and addenda ts31.10a-1969. Fuel Gas I'iping/ 831.2-1968 - Powel lllping,831.1a-61 Àddenda to ÀNSI 831 ' 1 ( 1955 )

831.2-68 Fuel Gas PiPing831.2-1968-Fuel- Gas Piping (incorporated by reference¡ see S85f.27);831.3 Chemical Plant and Petroleum Refinery Piping, 1987 (including 831.3a-1988' 831.3b-1988, and 831.3c-1989 addenda)831.3 chenical PIant and Petrofeum Refinery Piping, 1993B3Ì.3-66 Petrol-eum Refinery l',ipj-ng831.3-200z-Proõess PiÞing (incorporated by reference, see S85I.27) ;

8j7.4-2002 (October 2002\ "PLpeline Transportation Systems for Liguid Hydroëa.rbÒns and Othe¡ Liquids"831.4-2002-pipeline Transportation Syslems for Liquid Hydrocarbons and other f,iquids (incor-porated by r:eference, see S85:

Append¡x A, Page I

TnoÞm7Þ

Ioo()oo)Ol

ÀNSI/ASME 831.5-1966 Addenda 831,5a (1968) Refrigeration Pì.ping,ANSJ/ASME 831,5-1987 Refrigeration Pípíng, 1987ÀñSI/ÀSME 831.5-1966 Refriç¡eration Pipj-ng Code, Ainerican National Standards lnstitute, 831.5-1966 with addenda 831.1a-I968,ÀNSI/ÀSME 831.5-200l-Ref::igeration PipÍng and Heat Transfer cômpônents, and 831,5a-2004, Addenda to ÀSME 83f.5-200i (incorpo:--ated kÀNSI/AS¡4E 811.8-2003 (Febntary 2004) "Gas Transrnission and Distríbution Piping Systems',ÀNSI/ASME 831.8-2003 (February 2004) "Gars Transmission and Distribution Pipinq Systems."ÀNSI/ÀSME I}31.8-2003 Gas Transmission and Distribution Piping SysternsANSI/ASME 831.8-2003-€as Tlansmission and Distribution Piping Sysbems (incorporated by reference, Fee S851.2?);ÀNSI/ASME 831.8S-2004 "SuFFleinent to 831..8 on Managing System Integrity of Gas Pipelines.,'ÀNsI/ASME 831.8s-200l-Managing Systen Integrity of Gas Pipelines (incÕrÞorated by reference, see S851.27);ANSf/ASME BJ.l .9-1996-Btrildlng Services Pi-ping (-i.ncorpor:ated by reference, see S851..27);ÀNSI/ASME B-31"L1-2002-Slurry Transportation Þiping Systens (incorporated by reference/ see S851.27); ancìÀNSI/ASME B31G-1991 (Reaffirrned; 2004) "Manual for Determining the Retnaining Strength of Corroded Pipelines"ANSI/Asl4E 831G-1991 (Reaffirmed; 2004) "Manual for Deterrnining the Remaining Strength of Corloded pipelines.,,AllsI/ASME B3Lc-l991-Manual for Deternining Remaining StTength of Corrodecì Pipe!.ines (incorporated by reference. see S851.27).ÀNSI/ASÀ48 836.10-1979 l,ielded and Seamless Wrought SteeI PipeANSI/ASME 836.10-1979 welded and SeamÌess ç^lrought Steel PipeÀNSI/ÂSME 836.10-1979 trlel^ded and SearnLess I¡lr:ought Steel Pipe.ANSI/ÀSME 836.10-1979. Welding and Seaml.ess Wrought SteeL Pipe-ANSI/ASME 836.10M-85 weldecl and seamlese wrought steel PipeÀNSI/ASME 836.19M-85 Stain:-ess Steel FipeÀNSI/ASME 856.1 1959, Safety code for: Pc'wered Indust::iaL Trucks, pages I and 13ÀNST/ASME 856.1-69 Safety standat:d for Powered Indust-ria] TmcksÀNSI/ASME 856.1-1969 - "Àme::ican National Standard for Powered Industrial- Trucks, Part II,ÀNSÌ/ÀSME 856.1-1969 American National Slandard Safety Code for Pov¡ered Industrial Trucks, A:\SI 856.1-f969ÀNSl/.ASME 856.6-1992 (wilh addenda), Safety Stanciard for Rough Terrain Forklift TrucksÀNSI/ASME 856.6-1992 (with addenda)f "safety Standard for Rough Terrain rorklift Trucks"rÀNSI/AS¡,18 857,1-65 compressed Gas Cylincler Vãlve Outlet and Inlet ConnectionsÀNST/ÀSME 857.1-1965 Amer:ican National Standard Compr:essed Gas Cylinder VaÌve Outfet ancì Inlet Connections,ÀNSI/ASME 893.5 Recommended practice for the use of Fire Resistant I'luids fo¡ FLuid Pover Systems, L979ANSI/ÀSME 8I75.1-l^991 Safety Requirernents for Gasoìine-Por'¡ered Chain Sarvs 19I0.266 (e) (2) (i).ANSI/ASME 8175.1-1991 "safety Requiremenls for Gasoline-Powered Chain Sav¡s"ÀNSI/ÄSQc Q9001-1994 Quality Systems-Moclel for Quality Àssurance j.n Design, Developr,ent, Production, Installatron, and Servicing, iÀNSI/ASQC Q9001-1994 Quality Assurance in Design, DeveLopinent, Irr:oduction and ServicincJ, 1994ÀNSI/Associ,ation of Home ApFliance Manufacturers (ÀHÀ1V) Standard HRI-1-2004, "Energy, Performance and Capacity of Househol.d Refrig€ANSI/ASTM "Stândard Test Method for Length and Length Distribution ôf CÒtton Fibers (ArÌay Method), ÀNSI/ÀSrM D 1140-77 (1982)À¡lSI/ASTM D3536-76 "SLanda¡d Test Methocì fo¡ Volecular Weight Àverages and Molecul-ar t'Ieight DisLribubion of Poiystyrene by Liquid IANSI/BHìtrA 4f56.2-1989 Standard for Borecl and Preassembled Locks and LatchesÀNSI/BOMA 265.I-7996 Standard Method for Measuring Fioor Areas in Office BuiJ.dings (the BOI{A Standard), approved Junc 7, 1996t IBRÀNSI/EIÀ .-159-A-84 EIÀ Standard Colors for Color IdenLificatìon and Coding,ANSI/HPS Ì,113.1-1999 "Sampling and Monitoring Releases of Airborne Radioactíve Substances fron the St-acks ancì Ducts of NucÌear FacilANSI/HPVÀ HP-1-1994.Ajnerican NationaL Standard for Hardwood and Decorative PLyk'ood-ÀNsI/HPVA HP-l-1994 (Äpproveit 1995).ANSI/ICEÀ S-84-608-1988 Standatd For Tel.ecommunications Cable, FiIIed, Polyolefin fnÊulated, Copper Conduct.or Technicai RequirementANSI/ICEA S-84-608-f988 Standard For Tel.ecomnunications Cable, filleci, Polyolefin Insulated, copper Conductor Technicai RequirementANSI/ICEA S-89-648-1993 St.rndard For Tel-ecommunications Aerial Service WireÀNSI/IcEÀ S-89-648-1993 Standard For Telecommunications ÀeÌial- Service tiire, Techni-caJ" Requirements (appl:oved by ANSI July Il, L991ÀNSI/IEEE 743-1984 IEEE Standard Methode and Equipment for Measuring the Transmission Characteristics of Analcg Vo:ce Frequency CirÀNsI/IEEE Àmerican Nationai- Standard fnstitute/fnstitute of Electrical- and El-ectronics Engj.neersr Inc. (.äNSI/IEEE), 1993 National- IANSI/IEEE C2-I997 National Electrical Safety Code (NESC)ANSI/rso:;-3-1995 ÀNsI/NAP¡I rT2.18-1996, March 8, 1996, American National Standard for Photography-Density Measurements-part 3: Sp€ANSI/Iso 5,2-1991 ÀN6I/NÀP¡Í IT2,!9-1994, February 20¡ 1995, lLrìerican National Standal:d for PhotograÞhy-Density Measurements-lart 2tÀNsI/Iso 543-1990 (ÀNSI IT9.6-1991) PhotograÞhy-Þhotographic Films-Speôificaliôns fol: Safety I'ilrn; and,ANSI/rSO 3334-1991 ANSI/ÀTIM MS51-1991r Mây 10, I99L, Micrographics-ISO Resolution Test Chart No. 2-Descripticn and Use.ÀNSI/ñÀPM IT9.l--1.992 Imaging Media (FiJ-n)-Silver-Gelatin Type-Specifications for StabiJ-ity.ÀNSI/NÀPM IT9.1l-1993 lmaging tuledia-P¡ocessed Safety Pholographic Films-storage; and

Appendix A, Page I

1l71oÞnl1))r

I

c)c)c)-lc)o)oì

ANSI/NÀÞM 119,18-1996 Lnaging À{aterials-F¡ocessed Photog::aphic Plates-Storage }ractices.ANSI/NÀpM T.Tg.20-Igg6 Imagíng Haterials-Reflection Prints-Storage Practices.¡\NSI/NAPM IT9.23-1996 Imäging HaterLals-Polyestel Base Magnetj.c Tape-Storage.ÀNSI/NEMÀ WD-6-wiring Devices, Di¡nensional- Requirements, 1988ÀNSI/NKCÀ ÀLÉ;1.I-1985 Recommended Perfornance and ConstTuction Standatid6 for Xitchen and Vanity Cabinets (Àpploved t4arch 18/ 1986)ANSI/NSF 14-1990 Plastic Pipinq Componenls and Rel-ated Materials-ANSI/NSF 14-1990.ÀNSf/NSF 14-1990. Plastic Piping Components and Related MateriaÌs- ÀNSI/NSF 14-1990.ANSI/NSF 24-1988 plumbíng System Components for Manufactured Homes and Recreationai VehicleE-ANSI/NSF 24-7988.ANSI/NSF 24-1988.. plumbing System Components for Manufactured Homes and Recreational Vehicles-ÀNSI/NSF 61-2001 Drinking Water System Cômponents-Heafth Effects-ANSI/NSF 61-2001.ANST/NSF 61-2001 Dri.nkíng \,tater system comPonents-Hea.lth effects-.ANSI/NSF 61-2001. Dr:inking l,üàter: System Components-Health Effects-ÀNSI/NSPI-1-91 Standard for PubIic Swinuning PoolsANSI/NWI,üDA rs 1-87 rnduElry Standard for Ì'trood Flush Doo¡sÀNSI/NIÄIWDA ÍS 2-87 rndustry Standard for wood windowså,NSI/NWWDA Is 3-BB rnduslry Standard fo¡ Wood sliding Patio Doo¡sÀNSI/ñWI,üDA Is 6-86 InduslÏy Standard for wood Stile and Rail Doorså,NSI/pTMÀ IT9.2-1998 April 15¡ 1998, .A.merican Nationaf Stândar-d for Imaging Material"s-Photographic Processed Films, Pl-atesr and Pa[ÀNSI/pIMÀ IT9.11-1998 Imaging Materials-Processed Safety Fhotographic Films-Storage.ANSf/PIMÀ I19.25-1998 Imaging Material-s-optical Disc Media-Storage.ANSI/RESNA Standard wc/Vo1,1-1998 Section 13, "Determination of Coefficient of Friction of Test Surfaces" (ÀNSI/RESN¿' WC/VoI'1-199tÀNSI/SAn 226,7-Lgg6,,American National Slandard for Safety Glazing Ivlaterials for GJ-azing Motor Vehicl-es and Moto¡ Vehicle EquipnentÀNSI/SÃn 226.l-Lgg6 Àmerícan National Standard foT Safety GIazíng l4alerials for Glazing Motor Vehic.l.es and Mot-or Vehicle EquípmentÀNSI/SCTE 26 2OOI (forrnerly DVS 194): "Home Digital Netwoxk Interface Specification with Copy Protection"'2001ÀNSI/SCTE 54 2003 (formerly DVS 241): "Digita1 Video Service Multiplex and Transport System Standard fo¡ CabIe Te1evision," 2003ANSI/SCTE 65 ZOOZ (formerly DVS 234): "service Information Delivered out-of-Band for Digital Cab1e Televísíon," 2002ÀNSI/TIA project Z5 Data Ovel:view-New Technology Standards P!-oject-Digital- Radio Technical Standards, approved March 3¡ 2000. TeLec

ÀNSI/TIA project 25 DES Encryption Pïotôcol, approved January 23t 2DD]. t Tel-ecommunications Industry Àssociation, ANSI/TIÀ/EIÀ-102'¡ÀNSI/TIÀ project 25 FDMA Common Àil: Interface-New Technology Standards Pr:oject-DigitaÌ Radio Technicaf Standard6, approved April 1IÀNSI/TlÀ project 25 FDMÀ Corùnôn Àir Interface-New Technology Standards Project-Digital Radio Technj-cal Stanclards, approved ÃpriI 15

ÀNSI/TIÀ project 25 packeL Data Specification-Nevr Technology Sì:andards Project-Digital Radio Technical Standa¡ds, approved March 3,ÀNSI/TIA projec¿ 25 Radio Control ?rotocol (RC?)-New Technology Standards Project-Digital Radio lechnical Standards' approved Marc¡ANSI/TIA project 25 vocoder Descri-ption, approved May 5, 1998, lelecommunications Industry Àssociation. ÀNSI/TIA/EIA-102'BÀBA-1998.ÀOAC,,Official Methods of Ànal-ysis of the ÀOAC International-," (fôrmeriy the Àssociation of Official Ànalytiôal Chemists), 15th Ed.

ÀOAC¡ Official Methods of Ànalysís¡ lBth Ed. Revísion 2t 2007 ("Ìatest edition" is specified in some places - doubiecheck!)ÀpÀ 1999 edition of the standards for Educationaf and Psycholôgical- TestingÀpÀ construction and Industrial Plywood (r,Iith fypical APA lrademarks)-PS 1-95.ApÀ DeEign and Fabrication of All-Plywood Beams-APA H-8158 (PDS Supplement #5), 1995.ApA. Design and Fabrication of Glued Plywood-tumber Beams-APA-S 812Q, Suppl. 2-I992'ÀpA Design and Fabrication of Plywood Curved Fanels-ÀtsÀ-S 81lM, supPl. 1, 1990.APA Desígn and Fabrication of Plywood sandr,¡ich Panels-ÀPÀ-u 8148r Suppl. 4r 1990-¡,pÀ Design and Fabrication of Plywood Stressed-Skin Pânels-ÀPÀ-U 813L, Suppl. 3f 1990.ApA Design/Con6trucLion Guide, Residential and commercial-APA 830-P-1996.APA Panel- Design Specification-APA D410À' 2004'AET Zc American petroleum Institute Specification for Offshore Pedeslaf Mounted Cranes (API Spec 2C)

- ÀIlI 2C Specification for Offshole Pedestal Mounted Cranes, Sixth Edition' MaÏch 2004, Effective Date: Septembel 2004/ Àl'I Stôck l.

ÀpI ZD Recommended Practice for OFeration and Maintenance of Offshore Crane6 (ÀPI RP 2D)¿

- ÀpI 2D Recômnended Practiõê for Opêration and Maintenance ôf Offshore Cranes, Fifth Edition' June 2003' ÀPI Stóck Nô. G02005AFI 2FpS Rp for planning, Designing, and Constructing, Floating Production SystemsApI 2RD Recommended Practj-ce for Design of Risers for Floating Production Systens (FPSs) and Tension-Leg Piatforms (TLPB)' First Ec

AFI 2SK Reconmended practice for Design and å,nalys!6 of StatiÕnkeeping Systens for Floating Structures, Thi¡d Editlon/ OÕtober 200:À.pI 2SM Recommended practice for DeÉign, ¡4anufacture, Installation, and Maintenance of SynthetÍc Fiber Rôpes for Offshore MÕoring'Apf 2T Recommended Practice for Planning, Designing, and ConstTucting TensJ.on Leg Pl-atforms, Second Edition' August 1997, ÀPI Stoc}ÀPI 5! "specification for Line Piper" l43td edition and errata, 2004)ApI 5L1 ,,Recommended Practice for Railroad Transportation of Line Pipe," (6th edition,2002)

Append¡x A, Page 1o

Tnomn

Iooooql\¡

API 6A Specification for Wellhead and Christmas Tree Equipment, ÀNSI/APIfication 6À, ñineteenth Edition, JuIy 2004; al-so availableAPI 6AVt Specification for Verifícation TeBt of wel-lhead Surface Safety Valves and Underr¡ater Safety Valves for offshor:e Service, IAPI 6D "P:ipellne Valves," (22rLd edition, January 2002)- ÀPI 6D "Pipeline Val-ves" (22nd edition, Janua.ry 2002)APT ÉiD Spec.ificalion for F-ípe1i-ne Valves, T\uenty-second Edition, January 2002; also available as ISO 14311:I999, MODr Pet.roleum ancAPI 9À Specification for Wire Rope, Section 3, Proper:ties and Tests for Wire and I,Iire Rope, May 28, 1984AÞI 128 (t4ay 1958) Specification fo¡ Ðolted Production Tanks, 1lth Ed., With Supplernent No. 1, I4ar. 1962APr 128 SJrecífication for Bolted P¡oduction Tanks, Eleventh Edilion, May 1958, and Slrpplement 1, March 1962;API 12D (i\ug. 1957) Specifícation for L¿rrge Welded Production Tanks, 7th Ed.AÞI 12D SPecificatiôn fôr Large t/'Ielded Productiôn Tanks, Seventh Edition, Àugust 1957; orAPT 128 "Speci.f ì cation for Shop Wel-ded Tanks f or: Sto:l:age of Procluct.ion l,i,qui,ds, " (1f th editi-on, 1994 )ÀPI 12F {l,Iar. L96L ) Specif -i-catj-on f or S¡iall Wel-ded P¡oduction Tanks, 5th Ed.ÀPI 12F Specification for SmaLi Weided Production Tanks, Fifth Editj-on, Àlarch 1961,APT 144 Specífication for Subsurface Safety Vaive Equipment, Tenth Edition, llovember 2000; also available aE lso I04J2:1999, petrolAFT 148 Recommended Practice for Design, Instailation, Repair and oÞeration of Subsul:fäcè Safety valve Systems, fifth Editionf octcÀFI 148 Recomended Practice for Design, Instalfation, Repair:, and Operat-ion of Subsurface Safety Valve SystemsAPI 14C ÀnaIysis, Design. Installation and Testing of Basic surface Safety Systems for Offsho¡e Production Platfoïmsf t986API 14C Reconmended Pr-actice for Analysj-s, Design, Installation, ancì Testing of Basic Surface Safety Systems for offshore ProcluclicAÞI L4E Reco¡n¡nended Practice for Design and Instal-laLion of Offshore Production PÌatform Pj-ping Systems, Fifth EdiLion, October l,AFI 14F Recommended ?ractice for Desiqn and Instal-iation of Electrj-ca1 SyÊtemË for Fixed and Fioating Off6hore Pet¡ol-eum FaciL:tiesAPI 14F Reconunended Practice for Design and Instaliation of ELectrical Systems for Fixed ancl Fioatinq offshore petroleum FaciLj-tiesÀPI 14Fz Recommended Practice for Design and Installation of El-ectrical- systems for I'ixed and Floating offshore l,etrol-eum Facil-itieAPI 14ltz llecommended Practice for Design and lnstailation of Electricai Syslens for Fixed and Floating Offsbore Petroleum Fac.ilitirAPI 14G Recomended Practice for Fire Preventj-on and Conlrol on open TyÞe offshore Production PIåtforms, Thircl Edition., Decemì:er L,AFI 14H Recomended P¡actice for Instailation, l"laintenance, and Repair of Surface Safety VaIves and Underwater Safety Vafves OffshcAFI 14J Recommended PracLíce for Design and Hazards Analysis for offshore Production Facilities, Second Edttion, May 2001, ÀpI sto(API L7J Specificatíon for Unbonded Flexible Pipe/ Second Edition, November 1999; Er-rata dated May 25,2007¡ Àddendum 1, June 2003,ÀIrI 53 Recommended Practice for Bfowout Prevention Equipment Systems for Drill:ng Wells, 1984ÀPT 53 Recomrnended Practices for Bl,owout- Prevention nquipnenl Systems for: Drilling well-Ê (

ÃPI 53 Recom¡nencled Practices for Blowout Prevention EquiÞment Systems for Driliing We1ìs, Third Edition/ llarch 1997; reaffj.ïmed SeËAPI 65 Recomended Practice for Cementj-ng Shallow Water Flow Zones in Deep Water I,Ie11s, Fi¡st Edition, Sept-ember 2002, À!f Stock NcAPI 80 "GuideLines for the Deflnition ol On6hore Gas Gathering T,ineett' lIËl. ed:tion, April 2000)AFf 500 Reconmended Practice for Classificatj.on of Locations for ELectrical fnstaLlations at PetroieuÌn FacilLties, Cl,assj.fied as ClAPI 505 Recornmended Practj-ce for Classification of Lócations for ElectricaL Installations at Þett:oLeu¡n Facilities, Classified as ClÀPI 510 "llressure Vessel InsÞection Code: I"faintenance fnspection¿ Rating, Repair, and ÀIlerationr', (8th edition, 1997 including ÀdcAPf 510 Pl:essxre VesseI Inspection Code: In-Service Inspection, Rating, Repair, and Àl"terationr Do\,rnstream seqment, Ninth EctitJ-on,ÀÞI 550 Manual on InsLallation of Refinery Instruments and Conl-¡ol Systems, Pari: ff-Process SLrean Anaiyzers, SecÈìon i-Oxygen AnaiAPI 620 "De6ígn and Con8tructj-on of Lar:ge, We1ded, Low-Pres6ure Storage Tanks," (10th edition, 2002 including ÀddenduÌn l)API 620 Fourth Ed. (1970) including appendix R, RecoÍì,-nended Rul-es for Design and construction of Large Welded Low Pressute StorageÀIrI 620 Reconr"'nended Rules for the Design and Construction of Large, Welded, Lolr-Pressure StÕTage Tanks, thlrd Edit:on, 1966ÀPI 650 "Uelded Steel Tanks fo¡ Oíl Storage," (10th edition, 1998 íncluding.Addenda 1-3)ÀPI 650 (.t966) Welded Stee-r. Tanks for Oil- Sto¡agèr 3rd Ed.ApI 651 "Cathodic P¡otectj-on of Àboveground Þet¡oleurn sLorage Tanks," (2nd edit.ion, Ðecernber 1997)API 652 "ì.ining of Aboveground Petroleu¡ì Storage Tank Boltoms," (2nd edition, December 1997)API 653 ":fank Inspection, Repa-r, Àlteration, and Reconstruction," (3rd edj.tion, 2001 incLucling Addendunr 1, 2003)l\I'I 1104 "t{elding of Fipel-:nes and Related Facilities," (19th edition, 1999 including october 31, 2001 er.rata)API 1104-1968 Standard fot WeJ-ding Pípe Lines and Related FaciLities,API 1130 ''Computatiónal Pipeline Ffonitoring for Liquid PipeJ.ines," l2nd edition, 2002)API 1162 "Public AwareneBs Programs for Pì-peline Opel:ators," (1st edition, December 2003)API 2000 "Venting Atrnospheric and Lo&'-Pr.eBsure Stoxage Tanks," (5th edj-tion, April I998)API 2000 Venting Atmospher:c and Lor//-Pressure Storage Tanks (Nonl-efrigerated and Reffiger-ated), Third Editlon/ Janua¿-y 1982 (reaffjAPI 2003 "Protection Against Ignitions Àrislng Out of Static, Lj-ghtning, and Stray Currents,' (6th edition/ 1998)API 2003 llrotection Àgainst lgnitions Àr'ising Out of Static, Lightning ãnd Stray Currents, 199.1API 2026 "Safe Àccess/Eclress InvoJ.ving Floating Roofs of Storage Tanks in Petrol,eum Selvice," (2nd edì-tion, 1998)API 2201 (1963| Welding or llot Tapping on Equipment Containing llammables

Appendix A, Page 'l 1

1lNC)þm7J¡t

I

c)c)c)dc)o)o0

ÀpI 2201-1963, I,Ielding or Hot Tapping on Equipment Containing Flalnmables'ApI 2350 ,,Overfitl protection for Slorage lanks In Petïoleum Facilitieer" {2nd edition, 1996)

ÀpI 2509 B Shop Testing of Autonatic riquid Level Gages, Bulletin 2509 B, December 1961 (Reaffixned August 1987, october 1992). forAPI 2510 ,,Design and Construêtion of LPG Instal-l-ations," (8th editiÔnr 2001)

Àpr 2517 Evapoiative Loss from Externai Floating-Roof Tanks, Third Edition, Febluary 1989' rBR approved for SÉi3.11L and S63.2406'ApI 251? The Evaporation Loss From Externat lloating-Roof Tanks, Publication 25L7, second edition' February 1980' for S52.741(a)(3).Apr z51B Evaporalive Loss frorn Fixed-¡oof Tanks, second Edition, october 1991, rBR approved for 563.150(g)(3)(i)(c) of subpart G o1

Apr 2551 Measurement and calíbration of Horizontal Tanks, FirÊt Edition, 1965; reaffirmed March 2002, ÀPr stock No. H25510

ÀpI 2552 usÀ standard Method for Measuxement and calibration of Spheres and spherÕj.ds, lirst Edition, 1966; reaffirr'ed February 20[

AFr 2555 Method for Liquid calib::ation of Tanks, First Edition, septeìnber 1965; ::eaffirmed March 2002; Alr stock No. H25550

Apr 2556 Recornmended pr:actice for correcting Gaùge TabLes f or: f ncrtìstat:i.on, second Edj.lion, August I993; reaff -i'r:med November 2o03,

Àpr Bulletin 2INT-EX, rnlerim Guidance for: À.ssessment of Existing offshore slructures for Hu¡ricane conditions, May 2007

ÀpI Bulfetin 2INT-MET, Interin Guidance on Hurricane Conditions in the Gulf of l"lexico, May 2007

Àpr Manual of ?erroleum Mea6urement specífications (MPMS) (fo::neriy A?r Publicalions 2517 and 2519), Firsl Edition, Apríl 1997, rIApr e1 specification for euality progiams for the petroleumf Fetrochemical and Natural Gas rndustry/,\Nsr/ÀPrficatj-on Q1' seventh I

ÀpI Rp zÀ-vtsD, Recorìnended tsractice for planning, Designing and cônstructing Fj-xed offshore Pfatforns-t'lo::king Stress Design, Tv¡entl

Þß.T ztT/240-89 Unitaïy Aír-Conditioning and Air-SouTce Heat Pump Bquiprnentaft:- 2:ro/240-2003 publishecl in 2003, .u;itafy Air-conclitioning ancl Ai¡-source Heat Purnp Equipmentr" IBR approved for s131-96.AI{T zLO/Z4O-2006 means the tes.L standard,,Unitary Air-CondiLioning and Air-Source Heat Pump Equipment" pubiished in 2006 by ARI.

ARr 310/380-2004 (CSA{744-O4J published in 2004, "standard for Packaged Te¡minaI Àir-condítione::s and lteat Pumps

ARI 340/360-2004 ,,peÌforrnance Ráting of commerciaL and Industrial unitary Àir-Conditioning and Heat PumÞ Equipment."ÀllI 810-2003 "Performance Rating of Äutonatic commercial lce-Makers"'.ARI 1200-2006 ,,peïfoïmance Rati;g of Commercial Refrigerated nísp1ay Merchandisets and Slorage Cabinets'"ÀRI 1200-2006 section 5, "Rating Requirements for Renote commercial Refrigerated Display Mer-chandisers and storage cabinets."Às.x R313.1-1971 (,,soil cone penetrorneter"), as reconfirmed in t9?5, American society of Agricultural Engineers ("ASAE") recorunend¿

AS.E 7-Bg rhe design wind loads for Exposure c specified in ÀNsr/AscE 7-88, "l4ini¡num Design Loads for Buildings and othe¡ structur€ASCE 7-l9Bg Mini¡num Design Loads for Buildj.ngs aûd Other St!-uctures-AsCE 7-1988.ÀSCE 19-1996 Structurai applications of Stee1 Cables for Buildings-ASCEI9t L996.

ÀSHRAE 23-2oO5 "Melhods oi testing for Rating Positive Displacement Refrigerant complessors and condensing units'"ASHRÀE 23-2005 means the tè6t standard .,¡letháds of Testing for Rating Positive Displacement Refrigerant compressÔrs and condensing

ÀSHRAE 3i-20OS,,Methods of Testing for Rating Unitary Äir-Conditioning and Eeat Pump Equipment-"ASHRÂE 37-20Ð5 means the test standard ,,Methóds of rãeting for Rating unita.ry Air-conditioning and Heat Pump Equipment" published j

ÀSHRÀE 41,1-g6 (RA 01) means the test standard "standard Method for Temperature Measurenent" published in 1986 and reaffirned in 2(

ASHRÀE 41,L-1986 (Reaffirmed 2001)r "standard Method for Temperature MeasuÌement."A'HRÃB 4L-2-87 (RA 92) means the test standald "standard Methods for Laboratory -Airfl-ov¡ Measurement" pubtished -in 1987 and reaffirnASHRÀE 4I.2-r9g7 (Reaffirmed 1.g92lt "standard Methods for Laboratory AirffÔw Measurement-"ÀSHRÀE 4L.6-94 (RÀ 01) means the test standard "Method for Measurement of Moist Ài¡ Properties" published in 1994 and reaffi¡med i¡ÀsHR][E 4r.6-7994 (Reaffirmed 2001), "standard Method for Measurement of MoiÉt Air PropertieÉ,"ÀSHRÀE 41.9-00 means the test standard,,Calo¡i¡neter Test Methods for Mass FIow Measurements of Volatile Refrigerants" published inÀSltRÀE 41.9-2000 ,,Cal-oïineter Test Methods for Mass Flor.¡ Measu¡ements of Volatile Refrigerants."ASHR_AE 51-gg/AMCA Standard 210-19gg rneans the test standard "Laboratory Methods of lesting Fans for Aerodynarn.ic Performance Rating"ASH¡_LE l15-95 RÀ(05) means the test standarcl "Methods of Testing for Rating for Seasonal- Efficiencl' of unj-taxy Àir conditioners anc

À5HRÀE 116-1995 (RÀ 2005). ,,Methods of Tes.tinq for Rating for seasonal Efficiency of unitary Ai¡ conditioners and Heat Pump6"'

ASHRÀE 1997 ASHRÀE Handbook of Fundamentals, Inch-Pound Edition, chapters 22 through 27

ASHRAE chapter 22 of the 1989 ASHRÀE ltandbook of FundamentalsÀSHRÀE/Air Movement and control Àssocj-ation Intet:national, tnc. Standard 3I-I999/2L0-1999, "Laboratory Methods of Testing Fans folASHRÀE/TESNA 90.1-1989 entitled /,Bnergy Efficient Design of Nev¡ Buildings Except Low-Rise Residentiaf Buildings¡" r¡ith Àddenda 90.1

¡.SHRÀE,/IESNÄ Standard 90' 1-1989ASME Boiler and p¡essure vessel- code section I, Powel: Boilers, July 1989 l¡ith 1989 addenda

ASME Boiler and pressure Vessel Code Section Vr NondeÊtructive Examination (1986)38.25-3(a)(1)ASME BÕiler and pressure Vessel- Code Section V/ Nondestructive Exanination (1986)151'04-7(a)(1)À,S¡,IE tsoiler and Pïessure Vessel Code' Sec. VIIf, 1949' 1950, L952, 1956, 1959t and L962 Ed'

ÀSME Boiler and Pressure Vessel Code, Sec- VIII' 1968

ÀSME Boiler and ?ressure Vessel. Code. Sec. VIII, Unfired Pressure Vessels, Including Adctenda (1969)

ÀsI4E Boiler and pressure vessel- code, section r, "Rules for construction of Power Boile¡sf" {2004 edi!íon, including addenda throuç

Append¡x A, Page 1 2

!noÞmnÞ

Iooot)o)ao

.ASIIE Boiler and Pressure Vessel Code, Section I, For'Jer Boilers, JuJ-y J.989 vrith 1989 addendAS!{E Boiler and Preesure Vessel Code, Section I, RuIe6 for Construction of Pov¡er Boilers; including ÀppendiceÊ 2004 Edition; and JrÄSME BoiLer and Pre6sure Vessel Code, Section IV, Rules for constxuction of Heating Boj-Lers; inclucling AÞpendices I, 2, 3, 5, 6, arÀSME tsoiL{rl: and Þressure Vesse} Code, Section IX, "Welding and tsrazing Qualificationsr,' (2004 edit.ion, inciuding addenda through JrASME Boiler and Pressure VeÉsel, Code, section IX, ûIelding and Brazing Qual-ifications, July I9B9 vrith 1989 addenda.ASME Boiler and Pressure Vessef Code, section V, Nonclesti:uctive Examination (1986)À'SME BoilÊr and Pressure Vessel Code, Section VIII, Division 1, "Rules for Construction of Pressure Vessels,. (2004 eciiLion, incl-ucASME Boiler and Pressure vessel Code, Section VIII, Division 1, Pressure vessels/ 1989r v¡ith Addenda issued December 31, t9g9 (.AS¡ASt'fE Boiler and PreFsure VesseL code, section vrrr¡ Division 1. PreEsute vesseigr July 1989 with 1989 addendaÀSME tsoil:r ånd Þlessure Vessei côde, SeëÈion VIII, ¡ivisíon 2. "Rul-es for constructíôn of Pressure Vessefs-ÀIternative Rulesf,' (ZtASME Boil.er and PÌ:essure Vessel Code, Section VIIT, RuLes fo¡ Constrllction of Pressu::e Vessels; Di.visi,ons I and 2 | ZD04 E,Ci.tion; JuASlnlE BoiL:r and Pressure Vessel- Code, Section VIII/ Rules for Construction of Unfirecl Pressure Vessels, 1963ASME BoiÌer and lressure Vessel Code: Section I, Poler Boil-ers, 1986 wlt.h addendaASI'ÍE Code for Pressure Vessels. 1968 Ed.ASME Code for Unfired Pressure Vessels for Pètroleum Liquid6 and cases of the ÀpI ancl the ASME, 1951 Ed.ASM¡ fnter:im Supplemenl 19.5 on Instruments and Àpparatus: Àpplicatiôn, Part lI of FIuid Meters, 6th Edi*.ion (1971), IBR approved fAst'fE l'tFC-3M-2004 (Revision of ÀSME l4Fc-3M-1989 (R1995))r Measurement of Ffuid FIow in Pipes Using orifice, Nozzì,e, and venlirriÀSME M¡'C-4M-1986 (Reàffirmed 1997), MeaÉ;ut:ement of cas Flov, by Turbine MetersÀSME ¡'1Fc-5M-1985 (Reaffir¡ned 1994)' Measurement of Liquid FIow in CLosed Conduits Usinq Transit-Time Uj-trasonic Florùmet-ersASME MFC-6M-1998 MeaÉure¡nent of Fl-uid Flow in Pipes Using Vortex FlowmetersÀSME MFc-7M-1987 (Reaffirmed 1992)¿ Mea6urement of Gas Flow by Means of criticat Flow VenturÍ NozzìesÀSl,tE ¡,lFc-gM-1988 (Reaffirmed 200I), Measurement of Liquid Flow in Closed Condults by f{eighing MethodASt'f¡ NQÀ-?-a-l990 addenda, par:t 2.1, l-o ÀSME NQÀ-2-1989 edition "Quality Àssurance Requj.t:ements for Nucieaï Facitity Àpplications;r,ÀSÀ'fE NQÀ-3-I989 edition, "QuaL:ty Àssurance Pr:ogram Requirements for the Col-Iection of Scientific ancl Technical Infor:natio¡ for SitASME Nucl:ar Quality Assurance (NQÀ) standard, NQÀ-1-1989 ed-LLion, "QuaIj-Ly Àssurance Program Requirernents for Nuclea¡ FacrliLies;^ASME Performance Test Code 4.2 (1,99L), ?est Code for Coal PulverizersÀSl'lE PTc 'i.1-1964 (Reaffirmed:.991), For'¡er Test codes: Test code for Stean Generating Units (vrith 1968 and 1969 Àcldenda), IBR apprcÀSl4E PTC 19,10-1981, Flue and Exhâ.ust Gas Ànal-yses []art 10r Instruments and Àpparatusl, IBR approved for 560.106(e)(2] of subpartÀSMn QRO-I-I994 Standard for the Qualifì.cation and Certification of Resource Recove.ry I'acility operatot:s¿ IBR approved for SS60.56eÀSME SPPE-L-L994 and SPPE-i-d-l996 Àddencla, Quality Àssurance and Certification of Safety ancl PolLution Prevention Equipment Usecl j.¡ÀSNT "Reccrmended Practice No. sNT-Tc-1Þ. (1988), Personnel Quaiification and CerÈification in Nondestructive Testing,,ASNT "Recommended ?¡actice No' SNT-TC-14 (1988)' Personnel puaì-ification and Cerlification in Nondes¡ructive Testing,,A¡nerican SocjAS0c 09000-1*1994 0uality ¡fanagement ancl Qualj.ty À,ssurance Standards Guiclelines for selection and Use American Society for çuaiityÀSOc Q900.t-1994 Quality systems-Mode1 for Quality Àasurance in Design, Development, Production, rnstallariÕn, and Servicing;ÀSQc 89002-1994 Suality Systems-Mode1 for Quality Àssurance in Production, tnstallation, and Servicing;ÀSQC Q9003-1994 Quality Systems-ModeJ- for Quality Àssurance in FinaI Inspection and Test;ASQC Q900¡i-I-1994 Quality ¡lanagement ancl çuality System ¡lements-GuidelinesASSE 1001 ANSI Perforinance Requirements for Þipe Applied AtmoEpheric Type Vaculrm Breakers-ÀSsE 1001 (AsSE/ANSI-1990).ASSE 1001 AssE/ANSI-1990). Performance Requi::ements for Pipe Applied Atmospher.Lc Type Vacuum Breakers-ÀssE 1001 ( ÀssE,/ÀNsI-1990).ÀS.sE 1002-1986 perfonmance Requirements for Water Closet FÌush Tank Fiil Va1ves (tsallcocks)-ÀSSE 1002 tìevision 5-1986 (ÀNSI/ÀSSE-1S.A'SSE 1002" Performance Requirements for Water Cl-oset Flush Tank FiIl Valves (Ballcocks)-ASSE 1002 Rev-ision 5-1986 TANSI/ ASSE-f9791ÀSSE 1006 (ÀSSE/ANSI-I986). llumbing Recluirernents fo¡ ResidentiaL Use (Household) Dishwashers-ASSE 1006 Plumbing Requirenìents for Residential Use (Household) Dishwashers-ÀSsE 1006, (ASSE/AÌìSÌ-I995).ASSE 1007-1986 ANSI Petformance Requirements for Home Laundry Equipment-AsSE 1007-1986.ÀSSE 1007-1986, Performance Requj.rements for Home Laundry Equipment- ASSE 1007-1986,ÀSSE 1008-1995 ANSI lerformance Requirelrrents for Household Food Waste Disposer Units-ASSE 1008-I986,ÀSSE 1008--1986. Performance Reguirement6 for llousehold Food l,laste Disposer Units- ÀSSE 1008-1986.ÀSSE 10lL-1981 ANsI Performance Requirements fôr Eose Connection Vacuum Breakeïs-AsSE 1011-1981 (ANSI-1982).ÀSSE 1014-1989 ANSI Þerfo-rnìance Requirements for llancì-heId Showers-AsSE 1014-1989 (ANSI-1990).ASSE 10I4--1989 (ANSr*1990). Performance Requirements for Hand-hel-d showeÌÊ- ASSE 1014-I989 (ANSI-I990).ASsE L016--1988 ÂNsI Ferformance Requirements fór Individuaf rherncstatic Fressure Balancing and combination contt-ôi for Bathing FacÀSSE I017-1985 A¡lSI Þerformance Requirements foÌ Temperature A.ctivated Mixing Valves fôr Primary Domestic Use-ÀSSE 1017-1986.ÀSSE 1017--1986. Performance Requirements for TenFerature Activated Mixi.ng Valves for Prirnary Domestic Use- ÀSSE 10f7-1986.ÀSSE 1019 ÀSSE/ÀNSf 1019-1978' Performance Requi::ements for WalI Hyclrants, Frôst Proof Àutomatic Draining¡ Ànt:--Backflow Types- ÀSSASSE 10I9-1978 ANSI Performance Requirements fo¡ l^Iall Hydrants¡ FrosL Proof ÀuÈomatic Draining, Ànti-Backfiow Types-À-ì,tsI/ASSE 1019"

Appenclix A, Page 13

T'nc))rtÌl7'!r

I

c)c)c)-ac)\¡c)

ÀSSE 1023 ÀNSI pe¡fo¡rnance Requirenents fór Hot Wate:: Dispensers, Household Storage îype ElectrieaL-ÀSSE 1023' (å'NSI/ÀSSE-1979).ASSE 1023 ÃSSE-I929), terformánce RequirementÊ for Eot l,rater Dispensers, Household Storage Type Electrical-AsSE 1023, (ÀNSI/ ASSE-l

i\SSE l0Z5-197g performance Requirements for Diverters for Plurnbing Faucets with Hose Sprayf Ànti-Siphon Type, Residential ÀpplrcatjÀSSE 1037-1990 ÀNSI Performance Requirer,ents for Pressurieed Flush.ing Devices (Flushometers) for Irlumbing Fixtures-ÀSSE 1037-1990 I

ASSE 1037-199û (ÀNsI-1990). performance Requirements for Pressurized FlDshing Devices (F.lushomete.rs) for Plurnbíng Pixtules- ÀSSE 1t

ÀSSE-197g), Þerformãnce Reguirements for Diverters for Plumbing Faucets r,¡ith Hose Spray, Anti-Siphon Type, Residential ÀpplicationsÀSTM AZ0lA Z0M-97a, Standard SpecificaLion for General Requirements for Steel PIates for Pressure VesselsASTM A20/A Z¡M-.g3a Standard Specífication for General Requirements for Steel Pjates for P¡essure veESelF

ASTM A36/A 36M-g7at Standard specification for carbon Structural steelÀSTM A4?-68 Malleable Iron castingsÀSTM A47-90 (1.995), Stãndard Speci.fication for: Ferl:jtic MaLleab],e Iron CastjngsÀSTM À47-68ÀSTM Ã,47-68 MalleabIe Iron CastingsASÎM 453-69 Welded and Seamless Steel Pipe.ASÎM A53-93 standard specification for pipe, Stee1, Black and Hot-Dipped, zinc-coated, l^lelded and Seamiess-ÀsTM 453-93.ÀSfM A53-98 Standard Specification for Pipe, Steeff Bl-ack and Hot-DipPed' Zinc-CÕàtedr Welded and Seamiess

ASTM A53-69 Grade B nfectríc Resístance Welded and Electric Ffash vJelded Pipeå,STM A53-93. Stancla¡:cì Specification for pipe, Sleei¡ Black ancl llot-Dipped, Zinc-Coated, Weided and Seamless- ASTM À53-93.ASTM AS3/A53M-04a (20041 ,,standard specification for Pipe, steel, Black and Hot-Dipped, zinc-coated weLded and seamless"ASTM A74-92 Standard Specification for Cagt Iron Soil Pipe and Fittings-AsTf[ I\74-92.ASTtl A74-92. Standard Specification for Cast Iron Soit Pipe and Fittings- ÀSTM 474-92.ÀSTì4 A99-?6 g2 (neapproved 1987)¡ Standard Specification for Ferromanganese, incorpo::ation by reference (IBR) approved for S60.261.ASTM Al.00-6g lqt 93¡ Standard Specification for Ferrosilicon, IBR approved for S60-261.ASTM À101-73 93, Standalcl Specification for Ferrochromiumr IBR approved for S50.261'ÀSTM A106-95 Standard Specification for Searnless Carbon SteeL Pipe for High-TemPeralure ServiceASTM A106/A106M-04b (20õ4) .standard specification for seamless carbon sleel Pipe for: High-Temper:ature service"ASTM 4109-91 Standard Specification foI steelf stl:ip/ carbon, cold-Rolied;ASTM 4126-66 Gray Iron casting for Valves, Fl-anges and Pipe FittingÀSTM A1Z6-95 Standard Specifiiation for Gray Iïon Castínqs for Valves, Flanges, and Pipe FíttingsÀsrM A126-66¡,STM å,134-96 Standard Specification for Pipe, Stee1, Electric-Fusion (Àrc)-Welded lSizes NPS 16 and Over)ASTM À135-9?c Standard Specification for Electric-Resistance-I^felded Steel PipeASTM A139-96 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (ÑPS 4 and Over)ÀsrM À153-g2 (Reapproveã rsez)/ standard specification for zíne coating (Hot-Dip) on rrôn and steel Hardr+are;

ÀSTt4 A17B/l\ 17814-95r Standard specification fot: Electríc-Resistance-h'elcled carbon steel and carbon-¡4anganese steel Boiier and Super

ÀsT¡4 A17glÀ 17gM-g0a (1gg6), standa.rd specification for seamLess cold-Drawn Low-Car:bon steel Heat-Exchanger and condenser Tubes

ÀSTM.A1B2/A IBZM-IIc, Stanåard Specification for Forged or Rolled Ä1loy-Stee1 Pipe Flanges, Forged Fittings, and Valves and Parts I

ASTM A192lA L92M-91 (1996), stanãard specification for seamless carbon steel Boiler Tubes for High-Pressure serviceÀSTM A193/À 193M-9sa, Standard Specification for Aìloy-Steel ancl Stainiess Steel Bolting Materials for Hígh-TeÍiÞeratule ServiceÀsTM À194/A 194M-98b, Standard Specification for carbon and À11-oy steel Nuts for tsolts for High !ressure or High Temperature servicÀsTM A197-87 (7992), Standaïd specification for cupola Malleable IronASSM A203/À 203M-97, Standard Specification for P¡essure Vessel Plates, Àlloy SteeJ-, NickeÌÀSTM À210/A 210M-95, Standard Specification for Seamless Medium-Carbon Steel Boiler and SuperheaLer Tubes

ASTM A2l3/A 213M-95ar Standard Èpecification for Seamless Ferritic and Austenitic ÀIloy-SteeI Boiler, Superheater' and Heat-Exchanç

ASTM A214lÀ 274M-g6. Standard specification for El"ectric-Resistance-hfelded carbon steei Heat-Exchanger and condenser Tubes

ÀsTM À226lÀ 226M-g5, Standard specification for Electric-Re6istance-welded carbon steel Boile¡ and superheater Tubes fol H.j-gh-IressÀsTM A234lA 234y1. g7 r Standard speCificatíon for Piping Fittings of l¡Irought carbon steei and Àlloy steer for Moderate and High Tenp€

ÀSTM A240lA 240M-99b Standard Specification for Heåt-Resisting Chromium and Chromium-Nj-cl<eL Ståinless SteeI P1ate, Sheet and StripÀSTM À242-8I Standard Specification for High-Strength Lovt-Alloy Structu¡a1 SteelASTM A249lA 24g$-g6at Slandard Specification for Welded Austenitic Steel Boiler, SuPerheaterr Heat-Exchangerr and condenser Tubes

ASTM A262-93a standal:d practices for Detecting susceptibility to Intergranular Attack j-n Austenitiõ stainless steel6ASTM À26slA 26BM-96, Standa¡d Specification for Seamless and Welded Ferritic and ¡'làrtensitic Stainless Steel Tubing fol: General selÀsTt4 4276-98 Standard specification for stainless steel Bars and ShapesÀSTM A2B5-78 pressure Vessel PLates, Carbon SteeIr Low- and Intermecliate-Tensiie St.rengthÀsTM À300-5g steel plates for P¡essure Vessels for se¡Vice a! LoW Tempelatures

Appendix A, Page 14

!nomnÞ

Ioc)(f

o\¡

ASTM 4302/À 302M-93 Standard Specifica.Lion for Pressu¡e Vessel Plates. Àl1oy Steel, Manganese-lulolybclenurn and Manganese-Mo.lybdenum lASTI4 4307--97 Standard Specification for Carbon Steel Bol¿E and Studs, 60,000 PSI Tensile StrengthÀ'SfM 4312/A 312M-954' Stanclard Specification for Seamless and We1ded ¿\ustenitic Stainless Steel pipesÀS.Il4 4320/A 320M-97, Standard Specification for Àlloy/Steel- Bolting Materials for Low-Temperature ServiceASTM Al33-€i7 Seamless and I,IeIded Steel Pipe for Low-TemperatuÌe ServiceASfM 4333/A 333M-94, Standard Specification for SeamLess and tfelded SteeI Pipe fo¡ Low-Tenperature ServiceASTM 4333/À333M-05 "Standard Specification fo¡ Seamless and Welded Sleel Pipe for Lo!.¡-Temperature Se:vice',ASTM 4333/'4333M-05 (2005) "standard Specification for Seaniess and tJelded Sleel pipe for Lorv-Tempeïaiure service.',ÀSTM À334/À 334M-96/ Standard Specification for Seamless and Welded carbon and Àlloy-Steel Tubes for f,ow-Temperature ServiceASTM 4335/A 335¡4-95a/ stanclard Specification for Seamless Ferrltic À11oy-Steel Pipe for High-Tempera-rure Se¡viceASTM Al50/À 150¡4-97, Standard Speci.fication for Carbon and Low-À1.].oy Steel, For:gì.ngs, Requi.::ìng Notch Toughness Testjng for pipi.ng (ASTI4 À351/À 35lM-94a, Standard Specification for Castj-ngs, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-ContainincJ pal:tsASTM 4352/À 352¡4-93 (1998), Standa¡d Specification for Steel CasLings, FerriÈic and MarLensitic, fo¡ Þr:essure-containing t¡arts. sujASIM 4358/A 358M-954' Standard Specificat.íon for Electric-Fusion-!,le1ded Austenitic Chromium-Nickel Alloy Steel pipe for ttigh-TempetASTI'1 4366/'A 366M-91., Standard Specification for 5tee1, Sheet, Carbon, Cold-RoIl-ed, comnercial- eual:ty;ASTM À369/À 36914-92' Standard Specification for carbon ànd Ferritic À11oy Steel ?orged and tsored Pipe for High-Tenperatul:e ServiceÀSTM 4370--974 standal:d Test Methods and ¡efinitions for MechanicaÌ Testing of Steei productsÀSTM A370--94 Standard Test 179.102-1i 779.702-4; Methods and Definitions fo¡ Mechanical Testing of SieeI procluctsÀSTM A3?2/À372M-03 (2003) ''Sta¡idard Specificabion for Carbon and ALloy SÈeeL Forgings for Thin-I,talied pressure VesseLs.',ASTM 4376/A 376M-96, Standard Specification for seamlesË AuÊtenitic SteeI Pipe for High-Temperature centïaI-Station ServiceÀSTM 4381,--96 (Reapproved 2001) "Standard Specification for Metal-Arc l,lelded Steel Pipe for Use With Hj.gh-pressure Transnission SystÀS'IM ¡,391-65 (ANSI G61. 1-1968 ) Àl-Loy Sleel ChainÀST¡4 4395-68 Ductile Iron fcr Lr6e at Elevated TemperaturesÀSTM Ä,395/À 395M-98, Standard Specification for Ferritic Ductj.le lron Pressure-Retaining castings fo:: Use at El-evatecì TemperaturesASTM 4403/À 403M-98, Standard Specification for Wrcught Aust'enitjc Stainless SLeel Piping FittìngsASÎM 4420/A 420M-96a, Slandard Specifj-cation for Piping Fitlings of Wrought Car:bon Steel and Aiì.oy SteeI for Lov¡-Tempel:ature ServicÀSTM 4441--81 Standard Specification for High-Strength Low-Àlloy Structural Manganese Vanadium SteeLAST¡4 À482-76 93, Standard Specification fôr Ferrochromesilicon, ItsR apptoved for 560.261.ÀSTl4 Ä481--64 74 (Reapproved 1988), Standa::d Specification fo.r Sificomañganese, IBR approved for S60.261.ÀSTM 4495--76 94' Standard Specification for Calcium-Silicon and Calcium Manganese-Silicon, IBR approved for S60.261.ASTM 4505-87 Standard Specification for Stee1, Sheet and Strip, A11oy, Hot-Rolled and Cold-Ro1led, General Requirements for;ASTM 451.4'-81 Standard Specification for High-Yield Slrength Quenched and Tempered Al-loy Steel Plate, Suitabte for Weldingå.sTM ^4515/'A 515M-03 Standard Specification fox Pressute vessel Platesf carbon steel-r for Intermediate- and Higher-Temperature ServjÀS'IM A5I6/A 516M-90 Standard Specification for Pressu¡e Vessel Plates, Carbon Steèl-, for Moderate and Lov,'el:-Temperature Servic,:ÀS'Il4 À'520-'97 Standard Specification for SupF:Lementary Reqüirements for Seamless and Efectríc-Resistance-hrelded Carbon Steel TubularÀSTM A'522lA 522M-95br Standard specification for Forged or RoLled 8 and 9? Nickel- ÀIloy Steel F1anges, Fittings/ Val-ves, ancl pârtsÀSTM 4525-'9Lb Shandard Specification fo¡ General Requirements for Steel- Sheet, Zinc-Coated (Galvanized¡ by the HoL*Dip plocess;ÀSTM 4526/A 526M-90, Standard Specificatíon fo.r steel Sheet, zinc-coated (GaLvanízed) by the Hot-Dip procesË, cornnercial euali.Ly;ASTI1 ¡\536-.84 (1993), Standa.rd Specification for Ductile Iron CastingsÀS'1'¡4 À537/À 5.17ì4-91 Standard Specification fôr I'ressure Vessel Platesf Heat-T¡eated, Carbon-Manganese-Silicon SteelÀSTM 4539-90a SÞecification for Bfectric-Resístance-weìded Coiled Steel Tubing for cas and FieÌd Oj-l l,ines, ASTM, A539-90aÀSfM 4539-1999 standard SpecificatÍon for Electric-Resistance-lleldecl Coiled Steel Tubing for ca6 and FueI OiI Lines, ASTM À539-199SÀSTM À539--90a Specification for E.lect¡ic-Resistance-Weided Coiled Steel Tubing for Gas and Fieid Oil Lines,ASTM A569lA 569M-914r Standard Specificalion for Stee1, Carb,:n (0,15 Maximumr Percent), Hot-Rolled Sheet and Strip ConKnercj_al- {)uaLjÀSfM 4572--82 Standard Specification for Hj.gh-strength Low-ÀILoy côlumbian-Vanadium SteeLs of Structurai- eualityÀSTM A5?5-.96 Standard Specification for Steel- Bars, Carbon, Merchant Quality, M-GradesÀST¡4 4576-.90b (I995), Standard Specification for Sleel- Bars, CarbÒn, Hot-I.¡rought, SÞeciaI QualityÀSTM 4588-81 Standard Specification for High-Strength Low-ÀIl-oy StructuraL Steel $¡j-th 50 Ksi lliniinum Yield Point to 4 :-n. ThicrÀSTM 4606--75 Standard Specification for Stee1 Sheet and Strip Hot- Roll-ed and cold-Ro1l-ed, High-strength, Low-Alloy, with Impr(rvedASTM 4607--98 Standard Specificatíon fot Steel, Sheet and Strip, High-Strength, Low-Àl1oy, Columbíum o¡ Vanadium, or Both. Ho:-F.olleÀSTM 4612*72a High Strength Steel PlateE for Pressure Vessels for Moderate and Lower Tenperature ServiceÀ,ST¡.1 À621lA 62Iùl-92, Standard Specification fÒr steel, sheet ahd ritrip, catbón/ Hot-Rolled, Drawing gualitytÀSTM 4633--794 Standard Specification for Nornalized High-Strength Low-Alloy Sttuctura.L Steel, 1979 EclitionÀSTM 4640--91 Standa¡d Specification for Zinc-Coated SteeI Strand for Messenger Support of Figure I Cabl-e;ASTM A6?1-04 (2004) "Standard SpecificaÈion fot: Elect.ric-Fusion-Weided Steel- Plpe for Atmospheric and Lov,'er Temperatures,,

Append¡x A, Page 15

TInoÞrTl7l!'

I

Cr(feJ,cl:lNI

å,STM A6?1-04 (2004) .,Standard Specification for Electric-Fusion-lfelded SteeL Fipe for Àtmospheric and Lol¡e¡ Temperàtures"'ASTM A6Z2-96 (Reapproved 2001) iStandard Specification for Electric-Fusion-Welded SteeI Pipe for High-Pressure Service at ModerateAS¡M t\691-98 (Reapproved 2002) ,,standard Specificatlon for carbon and Àlloy Steel Pipe Electric-Fusion-WeLded for High-Pressure selÀsTM À715-81 Standa¡d specíficatiôn for steeL sheet and strip, Iìôt-Rol-led, High-strength¡ Low-ÀI1oy with Irnproved FÔrnabilj-ty' 198l

ASTM Al00g/À 1008M-03 Slanda¡d Specifícation for Steel, Sheet, Cold-Rofled, Carbon, Structuraff l.ligh-Strength Low-ÀIIoy and High St

ASTM A1011/À 1011M-03a Stancla¡cl Specification for steel, Sheet and Strip, Hot-RoIJ.ed, Carbon. Stl:uctural. High-Slrength Low AIIoy e

ÀS'IM Adjunct F 1626, Symbols for Use in Àccordance with Regulation U-2/20 of the 1974 SoLAS Convention as mended PcN: 12-616260-tÄSTM AdJunct F 1626, symbols for use in Accordance with Regulation fi-2/20 of the 1974 sor,As convention, PcN 12-616260-01' 'o 1995

ÄSTM B3-90 Standard Specification for Soft or Ànnealed Copper Wire;ÀSTM 816-92 Standatd Specification for ¡ree-Cutting Brass Rodr tsar¡ and Shapes fôr tlse in Scr:ev,¡ MachinesASTM BZI-96 Standard Specìfì,cation for Navðl Br.ass Rodr Bar:. ancl shapesÀsTì4 826/B 2614-97, Standard specification for Àluininum-Àlloy sand castingsAST¡4 833-91 Standard Specificalions for Tinned Soft o¡ Annealed CopPer Wire for Elect¡ical- Purposes.ASTM B4Z-93 Standard Specification for SeamleEs Copper Pípe, Standard Sizes-ASTM 842-93,.a.sTM 842-96 Standard Specification for seamless coppel Pipe, Standafd sizesASTM Ð42-93, Standard Specification for Seamless Côpper Pipe' Standard Sizes- ÀSTM ts42-93.

-ê.STM 843-91 Standard Specification for Seamless Red Brass Pipe, Standarcl Sizes-ÀSTM 843-91.ASTM 843-96 Stanclarcl Specification fo¡ Seamless Red Brass Pipe. Ståndard SizesASTM 843-91, Standard Specification for Seamless Red Brass Pipe, Standard Sizes- ASTM 843-9I'ASlM 868-95 Standard specification for seamleÊÊ copper Tube, Bright ÀnnealedÀSTM 875-97 Standard Specification for Seamless CopÞer Tube

ÀsTM 885-96 Standard specification for Aluminum-Àl]oy Die castingsÀSTM I}88-66À Seanless Copper I'laleL TubeASTM BBB-69 Seamless CoPPer Water TubeÀsTM 888-93 Standard specification fo¡ seamless copper water Tube, ASTI'{ 888-93ASfM 888-96 Standard Specification for SeamleÊ6 CoPPer Water TubeÀSTM Bg8-66a Standard Specificat.ion for Seamless Copper Water- Tube¿ ASTM 888-66aASTI4 E8B-93, Standard Specification for Seamless Copper Wate¡ Tube- ÀSTM 888-93.ÀSTM 896-93 Standard Spècification foï Coppet:-Silicon Àtloy ?1ate, Sheet, Strip, and RolÌed Bar for Genei:aL ?urposes ancl PressLlre \ÀSTM 8111-95 Standard Specification for Copper and Copper-ÀIloy Seamless Condense¡ Tubes and Ferl:ule StockÀSTM 8117-64 Salt SPraY (Fog) TestASTM BL17-97 Standard ?ractice for operating SaIt Spray (Fog) APparatÙsÀsTM 8117-90 Standard Test Method of SaLt Spxay (Fog) sestj'ng;ÀSTt4 Þ117-97 ,,standard practice for operating Salt spray (Fog) Àpparatus" (ÀsTM 8117-97) is hereby incorporated intô s7'3-2 by lefÉÀST¡t B1z2lB Iz2yI-gS¡ Standard Specifi-ation for copper-Nickel-Tin AIÌoy' coppei:-Nickel-zinc À1loy (Nickel Silver¡ | and coPÞel:-Nickt.ã,STM Bj.Z4-96 Standard SpecÍfication for Copper and Copper ÀILoy Forginq Rod, Barr and Shapes

ÀSTM 8127-98 Standard Specification for Nickel-Copper AIIoy (UNS NO4400) Flater SheeL, and StripASTM 8152-97a Standard Specification for Copper Sheet' Strip, ?Iate, and Roll-ed BarASTM 8161-93 Standard Specification for Nickel seamless Pipe and Tube

ÀsTM 81.62-93a Standard specification for Nickei Plate' sheet, and stripÀST¡4 Bt65-93 Standard Specification of Nicke.l-CoPPer Altoy (UNS NO4400) Seanl-ess Pipe and Tube

ÀSTM 8167-97â standaïd èpecification for Nickel-chromium-Iron ÀIloys (UNS No6500r No6601¡ No6603, No6690' No6025' and No6045) sea;n:

ASTM 8171-g5 S.Landard Specification for copper-Àlloy Pi-a!e and Sheet for Fressule VesseIs, condensers, and Heat Exchanger-s

ASTM BI93-87 Standard Test Method for Resistivity of EÌectricai Conductor [laterials;ÀSTM 8209-96 Standard Specification foI Àfuminum and Aluminun-ÀIl-oy Sheet and PLateÀSTM 8209-93 Standard Specífication for Àluminum and ÀIuminum-ÀIloy Sheet and ÌIãteÀSTM 82I0-68 A.LuTîinum-ÀIIoy Drawn Seamless Tube6ÀSTM 8210-95 Standard Specification for .ã.Luminum and Aluminun-ÀIl-oy Drawn Seamiess Tubes

ÀSTM 8221-76 Aluminurn ÄIloy Exlruded Ba¡s, Rods, Shapes, and TubesASÎM 8224-80 Standard Classification of Coppers;ASTM 8224-91 Standard Classification of Coppers¡ÀsTM 8234-95 Standatd Speêifícation for Àluminun and ÀIuminun-Àl.l-oy Dral.Jn seamless Tubes for condensers and Heat ExchangersASr¡4 B2 41-6 9

ÀsTM 8241/E 24IM-g6, Standard specification for Àl-uminum and Aluminum-ÀIloy seamless Pipe and sea¡niess Extruded lube.ASTI4 8251-93. Standa¡d Specification fo¡ General Requirements for i,Jrought Seamiess Copper- and Copper-ALloy lubes- ÀSTM 8251-93.

Append¡x A, Page 16

-g7omnÞ

Ioooo{

ASTM 8280 A-95. Standard SpecificaL,ion for Seaml-ess Copper Tube fo¡ Àir Condibioning and Refrigeration Fieid Se¡vice- ÀSTM 8280. A-AsTM B2B0-97 Standard Specification for SeamlesB Copper Tube for Air conditioning and Refrigeration Field Serv.ice?\STI'1 B2B0--1995 Slandard Specì-flcation for Sea¡rless copper Tube for Aír Conditioning ancl Refrigeratlon Service, ÀSTÌ4 B2g0-1995ÀST¡4 ts283--96 Standard SPecification for Côpper and Copper-Àlfoy Ðie Forgings (Hot-Pressed)ASTM Bl06--92 Standard Specífication for CoÞÞer Drainage Tube (DIüV)-ASTI'Í 8306-92.ÀSTM B315--93 Standard Specification for Sea¡nless Copper AIìoy Pipe and TubeÀSTM 8361-.95 Standard Specification for Facto¡y-Made Wrought Aluminurn and ÀIum:nurn-AlJ.oy l,Ietding FittingsASTM 8456-95 "Standard SpecificaÈion for Electrodeposited Coatings of Copper Pìus NickeI pius Chromium and Níckel ptus Chromiurn,, (lÀSlM 8539--90 Standard Test Methods for Measuring contact Resistance of Electrical connections (static contacts);ÀSTM 8557--84 Tension Testing wrought ancl câst ÀIuminuin and Magnesium-Àl1ôy productsASTM I}580--79 Standard Speci.fícatíon for Ànodi-c Oxj-de Coatings on Äluminun, (Re-aÞproved 2000)ASTM 8633--85 Standard Specification for ElecLrodeposj-ted Coatings of 2inc on Iron anci Steei;ÀSTM 8694-86 Standard Specification for Copper, Copper A11oy, and Copper-Clad SLainIess SLeeI Sheet and Strip for ElecLrical CableASTì'I 8736--92a Standard Specification for Aiu¡ninum, ÀIuminum A1ioy, and Aluminum-Clad Steel Cabie Shiel-ding Stock;¡.STl4 8858M-95 Standard Test Melhod for Deternination of Susceptibiì-ity to Stress Corrosion Cracking in Copper Àl-1oys Using an ÀmrnorÀSTl4 C12-91 Standard tJractice for Instãlling Vitrified Clay pipe LinesÀSTM C33-99a, Standard Specification for Concrete AgqregatesÀ.STM c36lc 36M-99 Standard Specification for: cypsum WalLboarcì-ÀSTM c36lc 36M-99, 1999.ASTM C94l(: 94M-99 Standard Specification for Ready-Mixed ConcreteASTM C150--99 Standard Specification for Portland CementÀSTM cL77-85 (1993), Standard Test Method for Steady-State Heat Flux Measurenents and T'hernal Transmission propertj-es by Means of tÀSTM cl77--04 "sÈandar:d Test Method fo¡ Steady-State Heat Fl-ux MeasureinenÈs and Thermal Transmission lroperties by Means of the GuatÀSTl4 C208-72 Insulating Board {Cellulosic Filret), Stïuctural and Decorative (Reapproved 1982)ÀSTM C209--84 Standard Methods of Testing InsuJ-ating Boar:d (cellulcsic Fiber¡, Structural and DecorativeASTM C216--9lc Sbandard Specifica.Lion for Facing nrick- (Solid Masonry Units Made from Clay or Shale)ASTM C220-91 Standard Specification fo¡ Flat Asbestos-Cement SheetsASTI4 C22L--91 Standard Specification fot Corrugated Àsbestos-Cement ShèetsÀSTM C223--91 Standard Specification for Àsbestos-cement SidingÀSTt4 C330--99, Standatd Specification for Lightweíght Aggr:egates for Structural ConcreteÀSTM C509--91 Standard Specification for Elasiomeric Cellul-ar Preformed casket and Sealing MateriaLÀSTM C5I6--80 Standard Specification for Ver¡niculite Loose Fill The¡mal fnsulatj-on (Reapproved l-985)ASTI4 C518--91 Standard lest l4ethod for Sleady-State Heat Flux Measure¡nents and thermal Transmission P::operties by Mean6 of the HeatASTPI C51.8-04 "standard Test Method for Sready-State Therma-! îransnj-ssion Properties by Means of the Heat F.l-ow Meter Apparatus.,,ÀST¡4 c549--8I Standard Specification for Þerlite Loose !'i11 Insulation (Reapproved 1986)ÀSTl4 C554-88 Standard Speci.fication for RubbeT Gaskets for Case l¡on Soj-l- Pipe and FittingsASTM c564-88. Standard Specification for Rubber caskets for Cast Iron Soil- Pipe and ¡ittings- ÀSTM c564-BB.ASTM C578-92 Standard Specj-fication for Rigid, Celfular Þolyshyrene Thermai InsulaLionASTM C595--98 Standard Specífication for Blended Hydraulic CenentsÀSfM C640-83 Standard Specification for Insulation Board, Therlnal- (Cork)ÀS'Ilt C726--88 Standard Specification for MineraL Fiber and Roof Insulation EoardASTI"I C739--03 "Standar:d sÞecificatíon for Cellulosic Fiber Loose-Fiil Thermal Insufatíon.,,ÀSTM C739-91 Standard Specification for CelluLosic Fibe¡ (Wood-Based) Loose-Fii-l- Thermal Insul-ationÀSTM C754-88 Standa¡d Specification for InstallaÈion of SteeL Franing Membe¡s to Receive Screw-ÀtLached GypsumÀSTM C834-91 Standard Specífication for Latex SealantsÀSTM C841.--90 Standard Specification for Tnstall"åtion of Interio.r Lathing and FurringÀS'I¡4 c842-85 Standard specffication for Àpplication of Interior GyÞsun tLaster (Reapproved 1990)ÀSTM C843-92 Standard Specification for Àpplicatíon of cypsum Veneer plasterÀSTM C844--85 Standard Specification for AppJ.ication of cypsum Base to Receive cypsum Veneer pLasterÀSTM C846--76 Standa¡d Pract.ice for Applicatìon of Sb¡uctu¡al Insulating Board (Fiberboard) Sheathing (Reapproved l982)ASTM C864--90 Standard SpeciÍication for Den6e El-astonreric Compression Seal caÊkets, Settj-ng BLocks and Spacer6,AsTl4 c926-90 Ståndard Specification for Alpl-ication of PÕrtland cement-Based piasterAs.IM c1016-91 Standard specj.fication fot Flat GIassASTM Cl045-01 "Standard Pra:tice for Calculating ThermaÌ Transmission PToperties fron Steady-State Contlitíons.,'ÀSTM e1048-9L Standard Specification for Heat-Treatecì FLat Glass-Kind HS, Kind FT Coatecl ancl UncÒated classAST¡4 c1114-00 "Standard Tesb ì4ethod for Steady-State The¡mal Transmissj-on Propert.j-es by Means of the Thin-Heater Apparatus.',

Appendix 4,, Page 17

ÏtnoÞrn7l

I

C)c)C)

c,\l'Þ.

ÀSTMASTMÀsTIlÀSTMÀsuMtr CTM

ASTMASlM¡\STMASTMASTMASTMASTMASTMÀSTMÀ.ST¡4

ÀSIT¡4

ASTMÀSTMASlMÀSTT4

ÀSTMÀSTMÀSTMÀSTMASTMASTMÀSTMÀSTMÀ CTM

ÀSTMASTI4ASTMÀSTMASTM¡,STMÀSTMÀSÎMASTT4ÀST}4ÀSTMå,STM

ASTMASlMAST¡4ASTMÀ.STMASTMÀSTMÀSTMASTMASTMÀSTMÀSTM

CIl4g-02 ',Standard Specification for- Self-Suppo::ted Spray Àpplied Cellufosic The¡mal Insulation. "CJ.Z24-03 ,,Standard Specífication for Reflective Insulation for Building Applications

"'c1315-95 Standard Specification for Liquid Membrane-Forming compounds Eaving Special Properties for curinq and Sealing Concretc1363-g7 ..Standard Test Method for the Thermal Perfôrmance ôf tsuil-ding Àssernbliês by Means Ôf a Hot Eox APParätus."c1171-04a "standard Test Method for Determination of Emittance of Materials Near: Roo;n Te¡npel:ature using Portable Emíssometel:s.c1374-03 ,,slanclarcl Test Methocl for Determination of Instailed Thickness of Pneumaticaily Applied Loose-Fiil Buildi.nq InsulaticCISpI-301-90 Standard SpecificaÈion for Hubless Casl I¡on SoiI Pipe and Fit.Lings for Sanitary ànd Storn Drain. hTaste' and Venl

D5-65 Test for Penetration by Bítuminous MaterialsD5-65 Test for Penetration for Bitu¡ninous ¡'laterials/ D-5-65D9-87 ( Igg2l I Standard Termínology Reiating to lfoodD56-70 Test for Flash Point by Tag C-]osed TesterD56-70) Stanclarcl Method of Test for Flashpoint by Tag CLosed Tester ( ÀSTM D-56-70)D86-62 Test for Distiflation of Petroleum ProductsD86-82 Standard ì'lethod for Diçtillation of Petroleum ProductsDB6-62 Standard Method of Test for Distillatíon of Petroleun Products' ASTM D-86-62DB6-78 BZt g0t 9.1, 95, 96, Distillation of Petroleun Products, rBR approved for S560.562-2(d)' 60.593(d)' 60.5914(d)' and 60.fD86-82 "standard Method for DistiLlatíon of PetroieuÌn Products,"D88-56 Test for Saybol-t ViscosityD88-81 "standard Test Method for Saybolt Viscosity,"Dg2-g7 standard Te6t Method for Flash and Fi¡e ÞointE by cleveland open cupD93-TL Test for FIash Point by Pensky MartensD93-97 Standard Test Methods for Flash Point by Fensky-Martens Closed Cup Testel:D93-71 Standard Method of Test for FlashpoinL by Pensky-¡4artens Closed Tester ( )

D1,27-60 (,,Standarcl Methocl of Test for Melting Point of Petl:olatum and Microcrystalline Wax" (Revised 1960)'D129-00 ine-pptor"d 2005), Standard Test Method for Sulfur in Petroleum Froducts (General Bomb Method), fBR approved for S60.1D1"zg-64 7g, 95, 00, Stanåard Test Method for Sulfur ín Petroleum ?roduct6 (Generai Bomb l4ethod)' IBR approved for 5560'106(j)lD150-87 Standard Test Methods for A-c Í.ôss clÌaracteristics and Permittivity (Dielectric constant) of solid Efectrical InsulatjD156-g2',Standaïd Test Method for Saybolt Col-or of Petroleum Products (SaybôIt Chromometer Method),"D156-82,,Standaïd Test Method fof Sayboft Co.lor of Petroleun Products (Saybolt ChTomometef Method),"D240-00 Standard Test Method for Heat of Combustion of Liguid Hydrocarbon Fuels by Bomb Calorineter, for appendices A¡ D and ID240-j6 92, Standard Test Method for Heat of Combustion of Liquid lTydrocarbon Fuels by Bomb Calorimeter, IBR approved for SS6(

DZ57-gl Standard lest Methods for D-C Resistance o¡ Conductance of Tnsulating MaterialsiD270-65 75, Standard Method of sampling petxoLeum and Petroleum Products, IBR aPproved for appendix A: Method 19, section 12.:D2g7-g2 (Reapproved 2000), standard Test Method for API Gravity of crude Petroleum and Pet¡o1eun Produets (Hydroineter Method)D3Z3-94 Stanààrd Test Method for Vapor Pressure of ?etroleum Products (Reíd Method)D323-68 ,,Standard Method of Test for Vapôr Pressure of Petroleun Products (Reid Method)r" Àmerican Society fÒr Testing and Mat

D323-82 94, Tes.L MeÈhod for Vapor pressure of petrol-eum Froducts (Reid Method), rBR approved for 5560.111(I)' 60.11la(9)' 60-lD3B1-80 "standard Test Method for Existent Gum in Fueis by Jet Evaporation,"D3BE-77 Standa¡d Specification for CLassification of Coal-s by Rank, ÀSTM D 388-17D388-92 Standard Classification of CoaIs by RankD3gB-99 Standard Classificatíon of Coals by Rank, incorporation by reference for appendix I of this part-D3gg-38 Class I, Group 2¡ "standard Specifications for Cl-assification of Coal by Rank"'

D3gB-77 90, 91r 95, 98a. 99 (Reapproved 2004)E1 / Standard Specification for CLassification of CoaLs by Rank, IBR approveci forD3Bg-72 90, 91, 95, 9Ba, Standa¡d Specification for Cl-assification of coals by Rank, rBR aPProved fo¡ 5560,251(b) and (c) of s

D388-99.1 Standard Ctassification of coals by Rank'1 IBR approved for s63.7575'D396-90a standatd specification for FueL oilsD396-02a Standard Specification fo¡ Fuel oils,l IBIì aPPIoved for s63'7575.D396-78 g9, 90, gZt 96, 9g, St-andard Specificat-ion for Fuel Oils, IBR approved for 5560.4Ib of subpârt- Db of t-hís part-' 60.41(D412-98À ,,standard Test Methods for Vulcanized Rubber and Thermoplastic El-astomers-Tensionr"D4lJ-g2 (1993), Standard Test l"lethods for Rubber Property-Àdhesion to F1exible Subst¡ateD445-65 lest for Viscosity of Transparent and Opaque LiquidsD445-65). Standard Method of Test for Viscosity of Transparent and Opaque Liquids ( ASTM D445-65).D445-74 ,,Test for Klnematlc Vlscosity ôf Transpalent and Opaque Lfquids,"D465-82 "standard Te6t Methods fol Acid Number of Ro6ín¿ "

Appendix A, Page 1 I

TnoÞmnÞ

Ioooo\¡ûr

ÀSTM D471 Standard D 47L. tunerican Society for Tesì:ing and Mate¡iaLs, 1,00 Barr HarboÌ Ðrive, West Co¡sholr.ocken, PA 19428-2959,ASTM D47l--96 Standard TeBt Method for Rubber Froperty-Effect of LiquídsASTM D509--70 (Reapproved 1981)¡ "Standard Methods of Sampì-ing and Grading Rosin,,'ASTM 0523--89 (Reapprôved 1999), Standarcl Test Methôd fór Specular cfôss,ÀSTl4 D523-89 Standard Test Method for Specular closs/ IBR apÞroved for S63.782.ASTI{ D566-76 (Reapproved 1982)¡ "Standard Test Method for Dropping Point of Lubricating Grease,"ASTtI D5?0-95 Standard Test Method for Water Àbsorption of PlasticsASfi4 D6l0.-85 (Reapproved 1989)r Standa¡cl Te6t Method for Evaluatíng Degree of Rusting on Painted Steel Surfaces;ASTM D611-82 "standard îest Methods for 1\niline Point and Mixed Ànil-ine Poínt of Petroleum Products and Hycìrocarbon Soi.vents/'.ÀS'I!I D635-97 Standard Test Method fôr Rate of Burning and/or Extent and lime ôf Burning of PLàstics in a Horizontar I'ositionASTM D638--01 "Standard Test- Method for Tensj.le Proper:ties of Plastjcs.,,å'STl4 D665--98 Standard Test Method for Rust-Preventing CharacterisLics of Inhibrted MineraL oil in lhe Pl:esence of tnlaterÀSTM D72l--56T "TentaÈj.ve Method of TesL for Oil Content of Petroleu:n $taxes" (Revised 1956)ASîM D729--8I "Standard Specification for Vinylidene Chl-oride Molding Compounds,"ASll4 D737--75 standard TesÈ Method for Àir Perlneability of Textile Fabrics, incorporation by reference {IBR) aÞproved January 2it ItASTI4 D751-95 Standard Test Methods for coated FabricsASTM D781-1968 SLandard Test Methods for Puncture and Stíffness of Paperboard, and Corrugated and Solid Fiberboard, ÀST]I4 D-781-196fÀSfM D822--89 ståndård Pl:actice for Conducting Tests on Paint ancl ReLated Coatings and llateriaLs using Fil-tet:ecl Open-FLalr,e Carbon-Ã,]ASTM D835-85 Standard Specification for Refined Benzene-A85, IBR approved SepLernber 14, 1989 for S61.2?0(a).ASTM D836-84 standard Specification for Industrial G¡ade Benzene, IBR approved Septentber 14, 1989 for S61,270(a).ÀSTI4 D882--97 Standard Test Method for Tensil-e ProÞertieo of Thin Plastic SheetingÀSTM D938--7I (Reapproved 19Bl), "Standard Test ¡4ethod for: Congealing Pclint of PetróIeum Waxes, Including lretr:o.atum,,,À.sTM D968--81 "Standard Test- Methods for Àì¡asion Resj-stance of Organic Coalings by the Falling Àbrasive TesteÍ/,,ÀSTI4 D975--91 Standard Specification for DieseL Fuel- OiIsASTM D975-98 Standard Specification for Diesel Fuej- Oil-sASÎM D975--78 96,98a, Stanclard Specification for Diesel FueI Oils, IBR approved for 5560,111(b) of Eubpart X of this parr and 60.11ÀSTl4 D1004-944 Standard Test Method for Initiai Tear Resistance of Plastic Fil"m and SheetingÀSTì,1 D10.17-89 standard Test Methods for Evaluating the l,roperties of !{Òod-Base Fibe¡ and Particle pa:re} Mate¡ialsÀSTM D1072-06 Standard Test Method for TotaI Sul-fur in fue1 cases by Combustion and Barium Chforide TitrationÀSTM D1072-80 90 (Reapproved 1994). Standard Test Method for TotaÌ Sulfur in FueL cases, IBR appr:oved for- 560.335(b)(10)(ii).ÀSTM D1072-90 (Reapproved 1999), Standard Test Method for Tot.al Sulfur ir: Fuel- Gases, IBR approved for 560.4415(a)(I)(_ii).ASTì4 D1137-53 75t Standard Method for Analysis of I'latural Gases and Reiated Types cf ca6eouÊ Mixtures by the Va6s Spectïo:neterr rBIÀSTl4 DLl93-77 9Lr Standard Specification for Reagent Water, IBR approved for appendix B: -\4ethod 101, Section 7.1.1i Melhod 101À, SeAS'r'M D12l'/-993 (Reapproved 1998), standard Test Method for nensity and Relative Density (Specific ctavity) of Liquids by tsj-ngham ÞlÀSTl4 D123tì-82 "Standard Test ¡4ethod for ¡loru Rates of ThermoÞlastics by Extrusion Plast.ometer,,'ÀSTM Dl.23B-90b Standard Test Method for Flor¡ Rates of ThermopLastj.cs for Extrusion PlastoneterASTM D1243-?9 "Standa¡d Tesh ¡,lethod for Dilute Solution Viscosity of Vinyl Chloride Pol-ymers,',ASTM D1248-84 (1989¡, Stanclard Specification for polyethylene Plastic MoLding and Extrueion Materials,ASTM D124tl-84(1989) Standard Specification fo! PoLyethylene Plastj.cs l,tolding and Extrusion t{aterialsiÀSTI.1 D1250-07 , Standard Gnj.de for Use of the Petroleum Measurement TablesASTM D1266-81 9Lt 98r Standard Test Method for Su.Ifur in Petrofeun Pr:oducts (Lamp Method), IBR approved Ío¡ 5560.f.06(j)(2) and 60.:ÀSfM Ð1.266-98 (Reapproved 2003)é1, Standard Test Method for sui.fur in Petroleum lroducts (Lamp Method), IBR approved for S60.14L51eASTM ÐL298-99 Standa¡d Test Method for Densily, Rel-ative Density (specific eravity) or ÀPI cr-avity of Crude pet-roleum and Liquid peASTM D1303-55 [ReapProved 1979], "Standard Test. Method for Total Chlorine 1n Vinyl ChLoride Po:-]¡mers and Copolymers,,,ÀSTM Ð1331-89 Standa¡d Test Methods for Surface and Interfacial- Tension of SoLutions ôf Surface Àctive Àqents, IBR åppïoved for ap¡ÀSTM D135-3-78 "Standard Test Method for Nonvolatife Hatter in Volatile Solvents for Use in I'aint, Varnish, Lacquer¡ and Reia-,ed prcÄSTM DL38{;-78 "Standard Test l,lethod fol Àcid Nurnber (EnpirícaJ-¡ of Synthetic ancl Natural I^¡axes" (Revised 1978)ASTM D1386-78 "Standard Test Method for SaponificatiÕn Number (Enpirical) of Synthetj.c and NaturaL Waxes" (Rev.j.sed l97g)ASTM Dl387-78 "Standard Test Method for Àcid Nu¡nber (Empirical) of Synthetic and Natu¡al l.Jaxes" (Rev.ised 1978),ASTM D1415-88 "Standa¡d Test Method for Rubber Property-International Hardnes6"ÀSTM Dl.4l-B-81 "Standard Practice for Rubber and Rubbe.r Latices-No:nenclaturer"ÀSTM D143¿:-82 (1988)' standatd Test Method for Detetnining Gas Permeabilíty characteristics of I,Lastic Film and sheetingÀSTM DL457-56T "Test for ThermaL fnstabl-illty index of TetrafluoroethyJ.ene llomopolymer,' (Revised 1956)ÀSTM 01475-85 Standa¡d Test Method for Density of Paint, Varnish, Lacquer, and Rel-ated ProductsA'ST¡'[ D1475*60 (Reapproved 1980), 90, Standa¡d lest Method for- Density of Faint, Varnish Lacquer, and Related Products, lB1ì. approvec

Appendix A, Page 19

'I)¡,c))rm7J)r

Ic)c)()Ic)\tql

ÀSTII D1475-90 Standard Test MeLhod for DensiLy of Paint, Varnish Lacquer, and Related Products, IBR approved for S63'788, appendixASTM D1475-98 [Reappïoved 2003), "standard TeÊt Method for DenEity of Liquid Coatings' Tnks, and Related Products," IBR approved fcASTM D14g0-93 (Reapproved 1997), Standard Test Method for Density and Relative Density iSpecific Gravity) of Vj.scous Materials by IÀSTM Dl4g1-93 (Reappt-ôved 199'1), Standard Test l.,lethod fol: Density and Rel-ative Density (Specific Gravity) of ViscÕus Materiafs by IÀST¡{ D1492-78 ,,Standard Test Method for Bro¡nine Index of Aromatic llydrocarbons by Coulometric Tittation,"AST¡4 D1492-70 (,'stanclard Test Method for Bromine Index of Aronatic Hydrocarbons by Coulonetric TitTation")ASTM D1500-82 ,,standard Test Method for ÀSTM Color of Petroleum Products (ÀSTM Col-or Sca.ì.e),"ASTM D1505-68 (Reapproved 1979), "standard Test Method for nensity of PIa6ticE by the Density-Gradient Technique'"ASTM D1505-85 (ReapFroved 1.990), "standard Test Method for Density of Plastics by the Density-Gradient Technique"'ÀsTM D1518-g5 (1990)/ Standard Test Method for Thermal Tr:ansmittance of Textile Matel:iälsASTM D:t525-87 ,,Standard Test Method for VTCAT Soften,íng Temperðture of Pl,asti.cs,"ASTM D1535-89 Standàr:rl lest Method for specifying color by thê Munsel-l system;ASTM D1552-01 Standard Test Method fo¡ Sul-fur j-n Petroieu¡n Products (tligh-Ternperature À{ethod}ASTM D1552-03 Standa::d Test Method for Sulfur in Petroleum Products (t1igh-Temperature t'{elhod}' IBR approved fo¡ S60.4115(a}(1)(i).ASTM D1552-83 95, 01, Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method). IBR approved for SS50.106(jlÀSTM D155?-91 Test Method fo¡ Laboratory compaction characteristics of SoiI Using the Modified Method (56r000 f1;-Ibf/1L3(2,700 kN-n

.A.STM D1601-78 ,,Standard Test Method for Dilute Solution Viscosíty of Dthylene Polymers"'ASTM D1613-96 Stanclard Test MethoÊl for Àcidity in Volatile So.l-vents and Chemical Intermediates Used in Paint. Varnish. Lacquerr ånÊ

ASTM D162L-94 Standard Test Method for Compressive Properties of Rigid CelIular PfasticsASTM D1622-93 Standard TeEt Method for Apparent DenEity of Rigid Cellular: Plasticså.sTM D1640-83 (Reapproved 1989), Standard Test Methods for Drying, curing, or FiIn tormation of organic coatings at Roor! TemperaturASTI.{ D1646-92 ,,standard Test Method for Rubber-Viscosity and Vulcanization Characteristiõs (Mooney Viscometel:)/"ÀSTM D1654-92 Standard Test Method foï Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments;ÀSf'M D1592-58 Test for F]ammability of PLastic Sheeting and Cellular PLasticsASTM D1693-70 (Reapproved 1988), Standard Test l"lethod for Environmentaf Stress-Cracking of Ethylene Plastics;ASTM D1709-01 Standard Text Methods for Impact Resistance of Piastic Filrn by the Free-Falling Dart MethodASTM D1747-62 (Reapproved 1978), "standard Test Method for Ref¡active Index of Viscous Materiafsf"ÀST¡t D17g5-96b Standard Specification for: Poly (Vinyl Chtoride)(lVC) I'lastic Pipe, Schedu.les 40, 80, and 12056'60-25ÀSTM D]g24-66 (ReapProved 1980), ,,Standat:d Test Method for Àpparent Viscosity of Plastisofs and Organosols at Lov¡ Shear Rates by B1

ÀSTM D1826-94 (Reapproved 1998), Standard fest Method for Cal-orific (Heating) Val-ue of Gåses in Natural Gas Range by continuous Rec

ÀSTM D1g26-?7 94, S:andard Test Method fo¡ Calo¡ific Value of Gases in Natural Gas Range by Continuous Recording Calorimete¡, IBR ¿

ASTM D1835-03a Standard Specification for Liquified Petroleurn (LP) GaÊes'L IBR approved for S63.7575.ASTM D1835-87 9Lt g7r 03a, Standard specification for Liquefied Petroleum (LP) Gases. IBR approved for ss60,41Da of subPart Da of tÀsTM D1835-97 Standard Specification for Liquefied Petroleum (LP) GasesÀSTM D1838-64 CoÞper Strip CoÛosion by Liquefied PetÏoleum (LP) GasesÀSEM D1922-00a SÈandard Test Method for propogation îear Resistance of PLastic Fil-m and Thin Sheeting by Pendulum MethodASTM D1945-96 (Reapproved 2001), Standard Test Method for Ànalysis of Natural Gas by Gas ChronatographyASTM D1945-64 76, gL, 96t Standard Method for Ànalysis of NaturaL Gas by GaE Chromätography, tBR approved for 560.45(f)(5)(i).AST'M D1946-77 Standard Method for Analysis of Reformed Gas by Gas ChromatograÞhyÀSTM D1946-90 (Reapproved 2006¡, Standard Practice for Analysis of Reforrned Gas by Gas ChromatographyASTM D1946-77 90 (Reapproved 1994)¡ Srandard ttethod for Ànalysis of Reformed cas by Gas chronatography, rBR approved for SS60.18(f)ÀSTM D1946-77 g0, 94t Standal:d Method for ÀnaLysis of Reformed Gas by Gas Chromatography, IBR aPProved for 563.11(b)(6),ÀSTM D1962-67 (Reapproved 7979), "standard Test Method for Saponification Value of Drying Oils, F

ASTM D2013-01 Standard Practice for Preparíng coat samples for AnalysisÀSBM D2013-01 Standard praëtice for preparing coal- samples for.\nalysis/L IBR aÞproved for tabLe 5 to subpart DDDDD of this part.ÀSTI.1 Ð2013-04 Standard I,râctíce for preparing CoaI Samples foï Ànaiysis, IBR apÞroved for table 6 to subpalt DDDDD of this part.ASTI,{ D20I3-72 g6t Standard t'lethod of preparing Coal Sarnples for Àna1ysis, IBR approved for Appendix A: }4ethod 19, Section 17'5,2.I'ÀSTM D2015-77 (Rêapproved 1978), 96/ Standard Test yiethôd for Gross Calorific vål-ue of Sofid FueL by thê Ädiabatic Bomb Calorimete¡ÀSTM D2016-7A 83, Standard Test Methods for Moisture Content of wood, IBR approved for Àppendix A: Method 28, Section 16.1.1.ASÎM D20gg-00 standard Test Method for Dynamic water Resístance of shoe upper Leather by the Maeser water Penetration îeÊter, IBR ¿

ÀSTt4 D2117-BZ ,,Standard Test Method for Melting !oint of SemicrystalLine Potymers by the Hot Stage Microscopy Methodr"ÀsTM D2133-56 "specifications for Acetal Re6in Injectíôn Molding and Extrusìon Materiais" (Revised l9éi6)'ÀST¡{ D2I61-56 Conversion Tabl-es ¡or SUS

ÀSTM D2197-86 (Reapproved 1991), Standard Test Method for À.dhesion of Organic Coatings by Scrape Adhesion;ÀsTM D2216-05 "standard Test Methods fo¡ Labo¡atory Dete::mination of I'tatet (Moistur:e) content of soil and Rock by Mass," IBR applro\

Appendix A, Page 20

TnomnÞ

Io(too-.t\¡

.ASTM D2234-00 Standa¡d PracLice fo¡ Col-lection of a Gross Sample cf CoaIASTM D2234-00,1 Standard Practice for Collection of a Gross Sample of Coal,1 IBR approved for: table 6 to subpart DDDDD of this partÀSlM D223¿l-76 96t 97b, 98' Standard Methods for Collection of a cross Sampfe of Coal, IBR àpÞroved for Àppendix À: l4eÈhod 19, SectjÀSTM D223¿I-D2234M-03 Standard P¡actice for collection of a GrÕss SmpLe of côal, IBR approved for table 6 tô subpaït DDDDD of thisÀSTl4 D2235-BB Standard SÞecifj-cation for So.Lvent cement for Acrylcnitrile-Butadiene-Styrene (À.BS) plastic piÞe and Fittings-ÀSTt4 D;ÀSTM D2235-88. Stanclard Specification far Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe ancl litti:rgs-.àSTMÄSTM D2236-70 ("Standard Method of Test for Dynanic Mechanj.cal Prcper-ties of Piastics by Means of To¡:sionai Pendulu:n,"ASTM D2241-96b Standard Specification for Poly (Vinyl- Chloride)(PvC) PresFure-Rated Pipe (SDR Series)I\STÙ4 D2247-92 Standard PracÈice for Testing f,[ater Resistance of ccatings in 100? Relative Hunidity;ÀSTM D226'i-68 78' 88r standard Test Method for Àromâtics in Light Naphthas and Àviation GasÕIÍne by Gas chromatôgraphy, IllR approveÄSTM D231.lt-75 Standard Recomrnended Practice:Eor Installing Bi.tumi-ni-zed Fiber Drai-n and Sewer Pl.pe (ReaÞpr:oved 1984)ÀSTl"1 D2321-89 Standard Practice for Underground Installation of Ther:moplastic Pipe for Sewers and Other Gravity-Flow ApplicaiionsASTM D2359-B5a 93, SLandard Specification for Refined Benzene-535, IBR approved September 14, 7989 fo¡ S61.270ta).ASTI4 D2369-87 Standard Test Method for Volatile Content of CoatingsASIM D2369-81 87, 90' 92t 93t 95r Standard Test Method for Volatile Content of Coatings/ IBR approved fot: Äppendix À: l'lethocl 24, ScÀS'I'M D2369-93 95, Standard Test Method for Vofatile content of Coatings, IBR apprôved for S63,78S, appendix À.ASIlM D2372-85 Standard Method of Separatíon of VehícLe fr:om Solvent-Reducible PaintsÀSTM D238?--76 Standard Test Method for Iieat of Combustion of Hydrocärbon Fuels by Bonrb Cal-o::imete¡ (High-Precision l'lethocl). IBR àFFÀSTM D2382,-76 88, Heat of Co¡nbustion of Hydrocarbon Fuels by Borrb Calori¡neter (High-Precision Þtethod), IBR approved June 6, 1984 fcASTI4 D2464-964 Standard Specification for Threaded Poly (Vinyl chloride)(PVc) PlaËtic P-ipe Fittings ScheduleÀST¡4 D2466-97 Standard Specification for PoIy (Vinyl Chloride)(PVC) Plastic Pipe Fittingsf ScheduleÀSTM D2467-964 Standard Specification f6r Poly (Viny1 chloride)(PVc) Pfastic Fj-pe Filtings, SchedureÀSTl4 D2502-92 (Reapproved 1.995), Standard fest Methocl for Es¿imation of Molecu.Lar Weight (Retative l4olecLr-Iar Mass) of petrol,eu:m OijÄSTM D2503-92 (Reapprovecì 1"997)r Standard Test Methocl for Rel-alive MoÌecular Mass (Molecular tr{eight) of Hydrocarbons by TìrermoelectÀSTM D2503-82 "Slandard TesL Melhod fo¡ Molecular Weight (ReJ-aì:ive Molecula¡ Mass) of Hyrirocarbons by ThennoeLectrj-c Measurement oJASTM D2501i-67 77t 88 (Reapproved 1993), Noncondensable Gases in C3 and Lighter Hydrocarbon Products by ca6 Chromatography, TBR applASTI4 D2501:-67 7"lt 88 (Reapproved 1993). Noncondensable Gases in C3and Lighter H1'drocarbon PToductË by Gas Chromatographl¡, IBR apprcÀS.IM 02513-87 "Standard Specification fcr ThermÒplðstic cas Pressure Pipe, Tubing, and Fittings,,,ASTI4 D2511-99 "Standard Specification fcr ThetmoÞ-lastic Gas PTessure Pipe, Tub.lng, and fíttings.,'ÀSTM D25L7-00 "Standard Specification for Reinforced Epoxy Resj.n Gas Pressur:e Pipe and Fittings."ASTì4 D2564-91a Standard SpecificaLion for SolvenÈ Cenents for PoIy (Vinyl Chloride) (FVC) Plast.ic ?iping Systems-ASTM D2564-91a.ASTM D2565-70 "Slandard Recommended Practice for operating Xenon-Arc Type (water-Cooled) Light- and t{atel:-Expo6ure Apparai:uE fcr E>ASTM D2565-92 Standard P¡actice for operating Xenon Arc-Type LighÈ.-Exposure Àpparat.us with and Without Water for ExÞosure of ptastjÀST¡4 D258{.-68 (Reapproved 1985), 94, Standard Test Method for lgnition Loss of Cured Reinforced Resins, IBR approved foï S60.685(cJAS'II4 D2597-94 (Reappr:oved 1999), Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixture6 contaíning NitrÕgenÀSEM Ð2622-98 Standa¡d Test Method for SuIfur in Petroi-eum Products by Wavelength Dispersive X-ray Íl-uorèscence SpectrometryASTM D2622-05 Standard Test Method for Sulfur j-n Pet¡oleun ProducLs by Wavelengt.h Dispersive x-Ray f'Iuo¡escence SpectromeLry, IBR.ASîM D2622-87 94t 98' Standard Test Method for Sulfur in Pet¡oleun ProductÊ by Wavelength Dispersive X-Ray FluoreEcence SÞectrometlÀSTM D2661.-91 Standard Specification Acryfonitrile-Butadiene-Styrene (ÀBS) Schedule 40 Pl-astic Dra:.n, waste, and vent pipe and fitÌASTM 02661-91. Standard Specification Àcrylonitrile-Butadiene-Styrene (ÀBS) Schedule 40 Plastic Draì.n, Waste, ànd Vent pipe anC FitASTM D2665-9lb Standard Specification for PoIy (Vinyl Chloride) (PVc) Plastic Drain, I^laste, and Vent Plpe and Fittings-AsTu D2655-SÀSlM D2665-97b Standard Specification for PoIy (vinyl Chloride)(PVC)Plastiê Drain, Waste/ and Vent Pipe and FittingsÀSTM D2655-91b. Standard Specification for Poly (Vinyl Chlo¡ide) (PvC) Plastic D¡ain, waste, and Veni: Pipe and Fit.bings- ÀSl'M Þ266:ASIM D2697-86 Standard TeÊt Method for Volume NonvolatiLe Malter in Clear or Pignnented CoatingsASIM D2697-86 (Reapproved 1"998), "Standard Test Method fÕr Vol-ume Nonvolatile Matter in Clear Õr F:-qmented Côatings/. IBR apprcvedÀSTM D277?-98 Standafd l,ractice for Dete.rmination of I'recision and tsias of Applicable Test Methods of Committee D-19 ôn Water-I62.CASTM D279r"-92 Standard lest Melhod for Re6istance of Organic Coatings to the Effects of Rapid DefoTmation (hpact);ÀSlM D2842-97 Standard Test Method for Water Absorption of Rigrd CelluLar PIasÈicsASTM D2846-92 Standard Specification fo¡ Chlorinated Þo1y (VinyL Chloride) (CPVC) Pl-astic Hot- and Cold-!¡ater Distribution SysEems-ASTM D2846-92. Standard Specification for Chlorinated Poly (VinyL Ch).oride) (CPVC) PlaËtic Hot- and Cold-r^Iater Distribution SystenrASTI4 D2857-70 (Reapproved I977 )f "Standard Test Method for Dilute Solution Viscosity of Pofymers,"ÀsTl4 D2B6:{-95 Standard Test Method for l4easuring the Minimum oxygen Côncentration to Support Candle-like Com.bustion ôf p1âstics (O}ÀSTM D2879-96 standard Test Method for Vapor Pressure-Temperature Relationship and fnitial- Decomposition TenÞerature of Liquids byASTM D2879-81 96, 97, Test Method for Vapor Pressure-Temperature i.el-ationship and Initial Dècompos:tion Temperature of Liquids by J

ÀSTM D2879-83 96r Test l4ethod for Vapor Pressure-Temperature RelaÞionship and InitJ-al Decomposition Temperature of r,iquids by Isote

Appendix A, Page 21

T¡ñoÞtTlNI!,

I ctctc)c¡\lq)

ASTM DZB?9-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initj-a] Decornposilion Tetnperatu¡e of Liquids byASTM D2880-90a Standard Specífication for Gas Turbine Fuel oilsÀSfM D2BB0-78 96t Standard SÞecification for Gas Turbine FueI oils' IBR approved for 5560'111(b)r 60.1114(b), and 60.335(d).ÀSTM D2908-74 gI, Standard Dractice for Measuring Volatile Organic J,latter in Wate¡ by Àqueôus-Injectiôn Gas Chromatographyf ItsR aptÀSTM DZ9B6-95A Slandard P¡actice for Evaluation of Àir Assay Medía by the Monodisperse DOP (Dioctyl Phthalate) Snoke TestASTl.l D2986-7! 78t 95a, Standard Method for Evaluation of Air, Àssay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test, ìASTM D2986-7! 78,95a, Standard Method for EvaluaLion of Ai¡, Assay Media by the l4onodisperse DO! (DiocLyl Phthalate) Srnoke Test, lÀSTM D3172-89 standard P¡actíce for P¡oximate Ànalysis of Coal and CokeASTM D3173-02 Standard Test Method for Moisture in the ì\naLysis Sample of Coal and Coke/1 IBR approved for tabie 6 to subpart DDDDI

À.STÀ.1 D3173-03 Standat:d Test MeLhôd for Moisture in the Ànal-ysis Sample of CoaI Ànd Côke' IBR apPr:Õved fo¡ table 6 to subpart DDDDD

ÀSTM Dll7J-73 87, Standar:d Test Method for Mojstur:e iñ the Anal.ysi.s SampLe of Coa-ì. and Coke, TBR aÞDl:oved fol: Appenclix A: Method l.!ÀSTM D3174-00 Stanclard Test Method for Ash in !he Ànalysis Sanple of Coal and Coke from CoaL

ASTM D3176-89 (Reapproved 2002), Standard Practice fo¡ Ultimabe Analysis of CoaI and Coke

ASTM D3176-89 Standard Practice fo¡ Ultinate Analysis of Coal and Coke¡.SfM D3176-74 89, Standard Method for Ultimate Analysis of Coai and Coke, IBR approved for 560.45(f)(5)(i) and Àppendix À: Method lASTM D3177-02 (Reappr:oved 2001), Standard Test Methods for Total Sul-fur in the Ànalysis Sample of Coal and Coke

ASTM D3177-75 89r Standard Test Method for Total Sulfur in the Analysis Sample of Coa-]" and Coke, IBR appr:oved for Ãppendíx À: MethcÀSTM D3178-73 (Reapprovecl 1979), 89, Stancla::d Test Methods for: Carbon and Hydrogen in the Ànalysis SamPle of CoaL and Coke, IBR ap¡ASTM D3Z3B-95 (Reapproved 2000), Sèandard Test Method for Calculation of Carbon Distribution and Structuraì G.roup Ànalysis of PetrcASTM D3245-96 Standa¡d Test Method for Sulfur in Petroieuin Gas by Oxìdative MicrocoulornelryÃ.STlt D3246-05 Standard Test Method for Su1fur j-n Petroleum Gas by Oxidative Microcoulometry, IBR apploved for 560'4415(a)(1)(ii)'ÀSTM D3246-81 92,96, Standard Test Method for Sul-fur in Petrofeum Gas by Oxidative Microcoulomet.ry, IBR approved fo¡ S60.335(b)(1(ÀSTM D3257-93 Standard Test Methods for Àromatics in Mineral Spirits by Gas Chromatography, IBR approved for S63.786(b)..à.STM D3270-73T 80 | 97t 95, Standard Test Methods for Änalysis for Fluoride Content of the Àtmosphere and Pi.ant Tissues (SemiautomalÀSTM D3275-89 ,,Standard Specification for E-CTFE-Fluoroplastic lvlolding, Extrusi-on, and CoaÌ:ing Materials,"ASTM D32g6-85 96, Standard Test Method for GrosE Calorific Value of CoaI and Coke by the Tsoperibol Bomb Calorimeter, IBR approvedA.STM D3309-92a Standard Specification for Polybutylene (PB) Plastic Hot- and CoLd-Water Distribution Systêms-ÀSTM D3309-924.ASTì4 D3J09-92a. Standard Specification for Polybutylene (fits) Plastic Hot- and Cold-Water Distribution Systems- ÀSTM D3309-924..ASTI4 D3311-92 Standatd Specification for Drain¡ Waste, and Vent (DWV) ?lastic Fittings Patt-erns-AsT¡4 03311-92.å.STM 03311-92. Standard Specification fol Drain, tr¡astef and Vent (DWV) Plastic Fittings Patterns- ÀSTM D3311-92.ASTM D3349-86 Standard Test Method for Absorption Coefficient of Carbon Black Pigmented Ethylene Piastj.c;ASTM D3370-76 95a, Slandard Practices for Sarnpiing ¡later' IBR approved for 560.564(j).ÀST'M D35gB-98 Standard practice for Calculating Heat Value, Compressibility Factor. and Re-l-ative Density of Gaseous Fue1s, for appcASTt.l D3656-8g StAndard SpeCifications fôt: InSect scrêening and Louver cloth woven From vinyl-coated Glass YarnsÀSTt4 D3679-92 Standard SÞecification for Rigid Poly (Vinyl Chloride¡ (PVC) Sid:ngå.STI,,I D36g3-94 (Reapproved 2000), Standard Test Method for Trace Efements in CoaI anci Coke Àsh Àbsorption,1. IBR approved for table É

ÀST'M D36B¿-01 S.handard Test Method for Total Mercury in CoaI by the Oxygen Bomb Cornbustion/Atomic Alsorption Method,l IBR approvedASTM D37g2-86 Standard TeÊt Method for Wateï Content of hlater-Reducible Þaínt6 by Ði::ect Injection into a Gas Chr:omatographÀsTM D3792-7g gL, Standal:d Test Method for water content óf water-Reducible Paints by Direct Injection into a Gas chl:omatograirh/ I!.ð.STM D3792-91 Standard t4ethod for vùater content of water-Reducibl-e Paints by Direct Injection intÒ a Gas Chromatograph, ItsR aPprov€ÀSÍ'M D39]2-80 (Reappr:oved 1989), Standard Test Method fo¡ Chemlcal Resístance of Coatings Used in L-ight-Water Nucleal: Power P]ants,ÀSTM D3912-80 Standa¡d Test Method for chemical Resistancê of coat:.ngs Used in Liqht-Water NucÌear Power Plantsr IBR approved for tASTM D3925-81(Reapproved 1985), Standard Practice for Sampling Liquid Paints and Related Fj-glnent CoatingsASÎM D3928-89 Standard Te6t Method for Evaluation of GIoss or Sheen Uniformity;ÀSTM D3953-91 Standard Specification D3953-91, Standard Specificatj.on for Stl'appingr' Flat Steei and SealsÀSTM D3953-1991 Standard Specification fo¡ StraÞping, FIat Steel and Seals-ÀSTM D3953, 1991.ÀSTM D3953-97 Febïuary 1998, Standard Specificatíon foÏ StTapping, Flat Steef and Seaisr Àmericañ Society for Îesting and Materiâ-lÀSTM D3953-97 Standard Spêëification for Strapping, FIat Steef and Seafsr Àmerican Society for Testing and llaterials (ÀSTM)/ D3953-

ÀSîM D3980-87 Standard Ptactice for Interl"aboratory Testing of Paint and Related MaterialsASTM D4012-81(Reapproved I9B7), Standard TeEt Method for i,later in Painte and Paint Materials by KarI Fische¡ MethodÀsrM D4017-g1 g0, 96a, Standard Test Methôd for water in Faints and Paint Material-s by the Kari- Fischer Titration ¡'¡ethodr IBR apprcÀSfM D4017-90 95a, Standard Test Þiethod for Water in Faints and Paint Materials by the XarI Fischer T.itratíon Melhod' ItsR approvedÀSrM D4052-96 (ReaÞÞroved 2002)¡ Standard Test Method for Density and Re.Iative Density of Liquids by Digital Density MeterÀSTM D4057-95 (Reapproved 2000)f Standard Practice for Manual Sarnpling of Petroleum and lel¡ol'eum ProductsASTM D4057-81 95, Standard Pt:actice for Manual Sampling of Petroleum and Petroieum Pl:oducts, IBR apploved fo¡ Àppendix À: l'{ethod 1!

Appendix A, Page 22

Tnomn

Ioooo-.t(.o

ÀSTM D4057-95 (Reapproved 2000), Standa¡d Practice fo¡ ManuaL Sarnpling of Petrol-eum and PeLroleum Producl.s, IBR approved for S60..i1ASÎM D4066-96a Standard Classification System for l.lylon Injection and Exlrusion Mater:ials (PA)ASTM D40B?.-89 Standard Test Method for Effects of Gan'na Radiation on coalings for Use in Light-Water Nuclear Fower Plants, IBR applÀS'IM D4082-89 Standard I'est Method for Effects of Garnma RadÌation on coalings for Use in Light-Wàter Nuclear Þôwer Plants, incorporÀSTl4 D4084-05 Standard Test Method for Ànaiysis of Hydrogen Sulfide in Gaseous Fueis (Lead Acetate ReactÍon Rate Method) / IBR apprcASTM D4084-82 94, Standar:d Test Method for Ana]-ysis oi Hydrogen SuLfide in Gaseous Fueis (Lead Acetate Reaction Rate Method)/ IBR ¿

ASTM D4l-01-82(1988) SLandard SpecificaLion for Pr:opylene PIasL:c InjecLion and ExLrusion MaL.erials;ASTM D4177-95 (Reapproved 2000), Standa¡d Practice fo¡ Automatic Samplj-ng of Petloleu¡n and Petroleum products, IBR approved for S6(¡\STM D4206-96 Standard Test Method for Sustained Burning of LiquiC Mixtures Using the Smal1 ScaIe open-cuÞ Apparatu6ASTì4 D4219-02 Standard Test Methods for Suifur ìn the Ànalysis Sarnple of coal and coke Using High-Temperature Tube l¡Drnace CôìnbustjÀSTM D4239-85 94, 97, Standard Test Methods for Su.l.fur in the Ànaì.ysi.s Sanpl.e of Coal ancì Coke Usj.ng High îemperature Tube FLrrnaceÀSTl4 D4256-89 94. Standard Test MethÕd for Dete;:mination of lhe Decontaminabil-ity of Coalings Used in Light-Water ¡luclear- Power Pl,¿ASTM D4268-93 SLandard TesL MeLhod for TesLj-ng liber RopesASTI4 D429r:-98 Standard Test Method for Sulfu¡ in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fì-uoreEcence Spectro:n€ÀSTM D429rt-O2 Standard Test- Method for Sulfur in Petr:oLeum and Petroleum Products by Energy-Dispersive X-Ray FLuorescence SpectroÌncÀSTM D4294-03 Standard Test Method for SuIfur in Fetroleum and Petroleum Frôdxcts by Energy-Dispersive X-Ray Fluorescence Spectroìn€ASTM D4359-90 Standard Test Method for Determining Whether a Material -is a l,j-qr.r.id cr a SolidÀSTM D4420-94 Standard Test Method for: Detelmination of Àromåtics in Finished GasoLine by Gas Chl:oma'hogt:àphyr IBR approved for S61.ASTM D4442-92 SLandard Tes.L Methods for Direct MoisLure Conì:ent Mea6ulement of Wood and Wood-BaEe t4aLerj-a1s-ÀSu'1 D 4442-92 (Re-apptASTI4 D4442-84 92r Slandard TeËt Methods for DiTect Moisture Content MeaBurement in l,lood and Wood-base Materialsr IBR appl:oved for,ËÀSTM D4444-1992 Standard Test Methods for Use and Calibrat!on of tland-HeId Moisture Meters-AsTM D4441, L992,ÀSTM D4444-92 Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters, ItsIì approved for Àppendix À: Method 28r fÄSTM D4457-85 Standard Test- Method for Determination of Dichloromelhane and 1,1,l-Trichloroethane ín Þaints and Coert-ings by DirectASTM D4468-85 (ReaÞproved 2000Ì, Standar-d Test Method for TotaI Sul-fur in Gaseous Fuel-s lry Hydrogenolysis and Rateometric ColorimetÀSTM D4565-90a Standa¡d Test Methods for Physical and Enviromentai Pe¡formance Properties of Insula.l-ions and Jackets for TelecomrÀS1ì4 D4566-90 Standard TeÊt MethodË for Eleclrical Perfornance Prcperties of InEulatj-ons and Jackets for Telecomunications Wire a¡ASTM D456tì-86 Standard Test Methods for Evaluating compatíbility Between cable Filling and Flooding compounds and Polyol-efin cabl-eÀSTM D460fi-O1 Standard Test Method for Determ-inatíon of Àrsenic and Seieniurn in CoaI by the Hydride Generation/Àtomic i\bsorption t!€ÀSTM D4629-02 Standard Test, Method for T'r'ace Nitr:ogen in Liquid Petroleurn Hydrocatbon.s hy Syringe/Inlet Oxidative Combust-ion ancl ClÀSTM 04734-87 96r Standard Specification fo¡ Refined Benzene-S45, IBR approved Septernber 14, 1989 for S61.270(a),ASTM D4809-00 Standard Test Method for Iieaì- of ComÌ:usLion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision MeLhod¡ASTM D4809-95 Standard Teet Method for líea¿ of Co¡nbustion of Liquid Hydrocarbon Fuels by Bonù Calorirneter- (PÌecision Method), IBR ¿

ÀSTM D4809-95 Standard Test Method for F:eat of Combustion of Lj-quid Hydrocarbon ¡uels by Bonò Calorirnetel: (Ft'ecision Method)/ lBR e

ÀSTM D4809-95 Standard Test Method for lìeat of Conbustion of f,iquid Hydrocarbon FueLs by tsonb Calorimeter (Precision Method), ftsR ¿

ÀSTM D48I0-88 [Reapproved ].999], Standard Test l4ethod for HydTogen Suffide in Natural Gas Using Length of Stain Detector llubes. IBIASTI4 D4840-99 (Reapproved 2004), "Standard Guide for Sample Chain-of-eustody Procedures,"ÀSTM D487?.-88 Standard TesL MeLhod fo¡ Dielectric testing of wire and CabLe Fiiling Compounds;ASTI4 D4891-89 (Reapproved 2006), Standard Test Method for Heating value of GaEeE in Naturaì Gas Range by Stoichionetric Combustion,ASÎM D4956-04 Standar:d Specification for Retrorefl-ective Sheeting for Traffic control, Àmerican Society Õf Testing and Materiais, .F

ÀSTl4 D4956-04t 2004 Standard Specification for Retrol:eflective Sheeting for Traffic Controi, Àmer:icail.Socì-ety of Testing and,YaterjÀSTt4 D4986-98 Standar:d Test- Method for Horizontal Bur:ning Characteristics of Cell-ular Polymeric MaterialsASTM D5066-91 (Reapproved 2001), "Standard Test Methocl for Dete¡mination of the Transfer EffÍciency Under Production conditions forÀSTM D5087-02 "Standa¡d Tesb Method for Determining Àmount of Volatile Organic Conpouncl (VoC) Released f::om Solventborne Àuto:notiv€ASTM D5198-92 [Reapproved 2003], Standald Practice for Nitric Acid Digestion of Solid Waste,l IBR approved for table 6 to subpart Iå.STu D522t)-92-"Standard Test Method for Determlnation of Butane Wcrking capacj-Èy ôf Àctivated car:bon," reapproved 2005, IBR approv€ÀSTM D528?-97 (ReapÞr:oved 2002), Standard p.ractice for Àutonatic Sampling of Gaseous Fuels, IBR approved for S60.441-5(a)(1),ASTI.{ D5291-02 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Product6 and LubrÀSEM D5291-02 Standard Test Methods for Instrumental- Determination of Carbon, Hyd.rogenr and Nitrogen in PetroLeum PToducts and LubrÀSTM D5373-02 (Reappl:oved ?007) Standard Tes! Methods fo.r fnstrumental Deterhination of Carbon, Hydroqenr and Nitragen in Labo¡atorASîÌ4 D5373-02 (Reapproved 2007)¡ "Standard Test Methods for Inst¡umental Determination of Carbon, tlydrogen, and Nitrogen in LaboratASIM D5403-93 SÈandard Test Methods for VolatiIe Content of Radiation curable Materials, IBR approved for Appendix À: Method 24t Se

ÀSTM D545-l-06 Standard Test Method for Deterrninalion of Total Sul-fur in Liqht Hydrocarbons, sÞark Igrition Engine FDel, Diesel- EngjÀSTM D5453-00 Standard Test Method for Determinalion of Total Sulfur in Light Hydrocarbons, Motor Fuel-s and 0iLs by ULtra./iolet ¡LLÀSTM D5453-05 Standa::d Test- Method for Dete¡mination ôf TôtaI Sulfur in Light ilydrocarbons, Motor Fuels and OiIs by ULtraviolet IhÀSTM D550/:-01 Standa¡d Tesù Method fo¡ Dete¡minaÈion of Suifu¡ Coinpounds in Natur:al Gas and caseous fuels by Gas ch¡oinatography anc

Append¡x A, Page 23

1'7lc)Þnt7')r

Ic)c)ctc,o:o

ÀSTM D5?62-02 Standa¡d Test Method for Nitrogen in Pet¡oleuln and Fetroleutn Products by Boat-Inlet ChemÍlu¡ninescence, IBR app::oved IASTM D5865-0La Standard Test Melhod for Gross Catorific Vaiue of CoaI and Coke, for appendices A, D, and F of thi.s part.i\STM D5865-03a Standard Test Method for Gross CaLorific Value of CoaI and Coke,1 lBR approved for table 6 to subpart DDDÐD of thisÀSTM D5865-04 Standa::d Test Methôd for Gross Calorific Value of Coal- ând Coke, IBR approved fôr table 6 tô subpart DDDDD ôf this p¿

ÀSltM D5865-98 Standar:d Test Method for cross Calorific Va.Iue of Coal and Coke' IBR approved for 560.45(f)(5)(ii)' 60.46{c)(2}' andASfì,l D5965-02 ,,standard Test Methods for Specific Gravity of Coating Powders," fBR approved for SS63.3151(b) and 63.395f(c).ÀSTl4 D6053-00 Standa¡d Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical fnsulati.ng Varnishes,AST¡4 D6093-97 (Reapproved 2003), "standard Test Method for Percent Volume Nonvolatil-e Matter in Clear or Pigrmented Coatings Using e

ÀSTM D6216-98 Standard practice for opacity Monitor Manufacturers to Certify Conformance r.¡ith Design and Performance SpecificationsÀ,STM D6ZZB-98 (Reappr:oved 2003), Standard Test Method for: Determination of SuLfur Cômpôunds in Natural Gas and Gaseous Fueis by Gas

ÀSTM D6266-00a ,,Test Method for: Dete::míning the Àmount of Vo.l.atile Organi.c Compoltnd (VOC) Released fr:om hratelrboïne Automotjve CoatjÀSÍ'M D6323-98 (Reapprovecl 2003)f Standàr:d Guide for Laborätor-y Subsampling of Media Related to Waste Management Àctivj-ties¿1 IBR aE

ASTI4 D6348-03 Standard Test MeLhod for Determination of Gaseous Compounds by Ext::active Direct fnte¡face Fou¡i-er Transfortn fnfrarecASTM D6348-03 Standa¡d Test Method for Determination of GaEeouF Compounds by Exlractive Direct Interface Fourier Transform Tnfral:ecÀsTM D635?-04 Standard lest Methods for Deternination of Trace El-ements in Coai, coke, and Combustion Residues from CoaI UtilizaticÀSTM D6366-99 Standa¡d Test Method for Total Trace Nitrogen and Its Derivatives in Liquid À.ronatic Hydlôcarbons by Oxidàtive Combus

ÀSTM D6420-99 (ReapÞt:oved 2004)r Standards Test Method for Deternination of Gaseous Organic Compounds by Dírect fntel:face Gas Chro¡ASTI{ D6522-00 (ReapÞrovecl 2005), Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentr-at.jASTM D6522-00 Standard Test Method for Dete¡mination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concent.rations in Ernissions frASTM D6667-01 Standard Test Method for Deternination of Tolal- Volatile Sulfu:: in Gaeeous Hydrocarbons and Liquefied Pet.roleun Gaser

AST¡{ D6667-04 Standaxd Test Method for Deter¡nination of Total VolatiIe Sulfur in Gaseous llydrocarbons and Liquefied }etroleum Gases

ÀSTlt D6?21-01 Standat:d Test Method for DeLer¡nination of Chlorine in Coal by Oxl-dative Hydrolysis Microcoulometry, IHR approved forASTIID6TZZ-0I Standard Test Method for Total Mercury in Coal and CoaI Combuslion Residues by the Direct Combustion Ànaiysis, IBR a¡ÀSTM D6784-02 Standard Test Method for ElementaI, Oxidized, Particl-e-Bound and TotaI Mel:cury in Flue Gas Generated from CoaI-FiredÀSTM D6911-03 ,,Guide for Packaging and Shipping Environnenta.I SarnpLes for Laboratory Analysis," for appendix K of this part, sect:icASTM D7036-04 Standa¡d Practice for Competence of Air Emission lesting Bodies, for appendices A, B, and E of this part.ÀsTM E8-g1 Standard Test Methods of Tension Testing of Metallic Matelials¡ andÀSTI4 E8-99 Standard Test Methods for Tension Tesling of Metallic MaterialsÀSTM E1l-95 Standaïd Specificatì-on for Wire CfoLh and Sieves for Testing PurposesASTM E23-96 Standard Test Methods for Notõhed Ba¡: I¡npåct Testing of Metallic Mate¡ialsÀSTM 823-98 Standard Test Methods for Notched Bar Inpact Testing of MeLallic Mate¡ialsASÎM 828-67 ,,Standard Test Method for Softening Poínt by Ring and Ball- APParatu6" (Reapp::oved 1977),ÀSTM E28-67 (Reapproved f9821, "standard Test Method for Softening Point by Ring-and-BaIl- Àpparatus,"AST¡4 829-90 Standard FractÍce for: Usíng Significant Digits in Test Data Èo Determine Conformance with SpecificationÀST¡4 EZ9-90 Standaïd practice for Using Significant Digits in Test Data to Determine Conformance vtith SpecífícationslÀSTM 850-82 86, 90 (Reapproved 1995), Standard Practices for Apparatus Reagents, and Såfety Precautions for Chemical Analysis of Me

å,STM 872-80 ,,Standard Methods of Conductíng Strength Tests of PaneIs for Buil-ding Construction"¡,SfM E72-80 Standard Methods of Conduct.ing Strength Tests of Pane.Ls for Building ConstructionÀS'IM Eg4-01-2001 Standald Test Method for Surface Burning Characteristics of nuilding l"laterials¡ ASTM Ð84-01t 2007ÀSTM EB4-98 Standard Test Methôd for Su¡face tsurning Characteristics of Building rYaterialsASTM 884-01 200I Standard Test llethod fol: Surface Bur:ning Characteristics of BuiJ-ding Materials,å,STM 896-95 Standaïd Test Methôds for VJaÈer Vapor Trànsmission ôf MaterialsÀSltM E96-95 Standard TesÈ Methods for Water Vapor: Transmission of MateriaLs¡ASTM E100-72-L978 Standard Specification for ASTM Hydrometerst" (E L00-72 (1978))AsrM 8112-88 Standard Test Methods for Determining Àverage Grain SizeÀSTM 8112-95 Standard Test Methods for Deternining Average Grain Síze' I996 EditionÀSTì.4 Dll4-95 Standaïd Pïactice foï Ul-trasonic PuLse-Echo StTaight-Beam Examination by the Contact MethodÀSTM 8119-88 ,,Standard Test Methods for Fire Tests of Building Construction and Mater-ials"ASTM E119-98 Standard Te6t Methods for ¡ire Tests of Building Construction and Materiais.ASTM E131-8la ,,Standard Definitions of Terms and SynrboiE Relatlng to Molecul-ar-SpectroscoÞy"'ASTM 8162-87 ,,Standard TeËt Method for Surface Flamrnability of Material-6 Using A Radiant Heat Energy Souxce."ÀsTM El62-94 Standard Test Method fol: surface Flammabiiity of Materia-ls using a Radiant Heat Energy source,AS'I¡4 E16B-67 77, g7r General Techniques of Infrared ouantitative Analysis, IBR aÞproved for 5560.4854(d)(1), 50.593(b)(2), 60.5934(¡,ST¡4 8169-63 77, 93, General Techniques of Ultraviolet ouantitative Àna].ysis' IBR approved for SS50.4BSa(d)(1), 60.593(b)(2)¿ 60'5!ASTM E1B0-g5 Standard practice for Deterrnining the Precision of ¿,SIM Methods for Analysis and Testing of fndustrial Chemicals' for

Append¡x A, Page 24

-onomnÞ

Iooooæ

ÀSTM E180-.93 Standa¡d P¡actice for ÐeLe¡mj.nJ.ng the P¡ecj-sion of ÀSTM Methods for Ãnalysis and Testing of Indusì:¡ial Chernicals, IBRå.STM 8208-95a Standard Test Method for Conducting Drop-ûIeigh'¿ Tesl to Deternine Nil-Ductil:.ty Transition Temperature of Ferrit.:"c SlASTM E2l3--98 Standard Practice for Ultrasonic Examination of Metal Pipe and TubingASTM 8220-86 Standard Method for calibration of Thermôcôup-Les by Cômpä.risôns Têchniques, incorporation by reference (ItsR) appr'rvedÀSTM 8260--7J 91, 96, General Gas Chromatography ?rocedllres, .tBR approved for 5560.485a(ct)(1)¡ 60.593(b)(2), 60.593a(b)(2), and 60.(ASTM 8260-.91 96, General Practice for Packed Column Gas Chrornatography, TBR approvecl for 5563.750(b)(2) and 63.785(b)(5).ÀSTM 8283--91 Standard lest Method for DeLernining the Rate of Air Leakage Through Exterior Windovrs, CurLain Wails, and Doors U::derASfÌ4 8300-86 Standard Practice for Sampling Industrial Chemìcals, for g52.741(a)(4)(i)(A)( 2 ).

^sfM 8324-79 "sb.andard Test Method for Relative Initial and:inaL MeltJ-ng Points and the Melting Range of organic chenicals/"

ÀSTM 8330--90 Standard Test Method for Struõtural Performance of Exterior I,lindows, Curtain tlalfs, ånd Doors by Unifôrn Ståiic A.;-r FtÀSTl,1 E33l-86 Standard Test Method for: lJater Pe¡etration of Exte::i.or: wi.nclows, Curtain t{aììs, and Doors by Unì-form Static Àiï Pr:¡lssutå.STt4 8380-82 Metric Þractice, IBR approved for 559.208(k).ASTM E380-91a SLandard Practices for Use of the International Systerns of Units (SI) (the Modernized l"leLric Sysl-en)ASTM E408-71 (Reapproved 20û2)r "Standard Test Methods for Total Normai nmittance of Surfaces Usíng Inspection-tr1eter Techniquer:."ASTì4 8515--95 (Reapproved 2000), Standard Test Method for Leaks Using Bubb1e E¡nission Techniques, IBR apÞr:oved for 563.425t:)(2I.ASTM 8648-97 StandaÌd Test Method for Criticaf Radiant Flux ôf F1Õor-Covering Systems Using a Radiant Heat Ener:gy Source.è.STM ]]662-97 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Material-sÀSTM E711-'87 (Reappr:oved L996)r Standard Test Methocì for cross Calorific Value of Refuse-Derivecl Fuei by the BorLb Cal"orimetel:,I IB¡ÀSTM 8773*97 Standard Test Methods for Àccelerated lleathering of Sealed fnsulating class UnitsASTM 8774-97 Slandard Specification for the Classification of the Du::ability of Sealed InÊulating Glass UnitsASTM 8776--87 (Reapproved 1996), Standard Te6t Method for Forr¡s of ChLorine in Refuse-Derj-ved Fuel,l, IBR approved for table 6 to sutÀ51'14 E87l--82 (Reapproved 1998), Standard Method of l"loisture Analysis of Particulate Wood Fuels,l IBR apprôved for table 6 to sllbpalÀSTM ]1885--88 (Reapproved 1996). Standard Test Methods for Ànafyses of I'fetals in Refuse-Deríved Fuel. by Àtomic Àòsorption SpectrosccÀSTM 81136-93 (1993), Standard Specification for a Radial Standard Refe¡ence Test TirerASTM E1333-96 SLandard Test Method for Determining Formaldehyde Levels from Wood Froducts Unde¡ Defined Test Conditìons Using ,a LarASTM 81337-90 (Reapproved 1996), Standa¡d Test Method for DeLermiuing Longj-tudlnal Peak Braking Coefllicient of Paved Surf¿rces UEinç.A.STM F34-76 (ReappÌoved 1980), "Standald Te6L Method for Liqul-d Extraction of Flexibl-e Barrier Materiais,ÀSTM F496--97 (Standald Specification for In-Service Care of Insulatìng Gloves and Sleeves, L997 ¡ÀSTM F628-9 1. Standard Specification for Acrylonitrile-Butad.iene-i3tyrene (ABS) Scheclu,Ie 40¿ ?lastic Drain, I\taste, and Vent- Pipe h¡j.lÀSTM F631-93 Ståndård Guide for CoIJ.ecting Skimmer Performan¡:e Data in Controlied EnvironmentsASTM F682-82a (1993). Standard Specification for I^lroughL Carbon SteeI Sleeve-Type Pipe CouplingsASTM F715-.95 Standard Test tlethods for Coated Fabrics Used fo¡ oil spiil ConÈro1 and StorageASYM 8722-82 (1993), Standard Specification for Weided Joints for Shipboard Pj.pì-ng SystemsÀST¡4 F1003-86 (f992), standard Specificatj.on for Sear:chlights on i4otor LifeboatsÀSTM F1007-86 [1996), standard Specification for Pipe-Line Expansion Joints of the Packed Slip rype for ¡,farine Àpp.icationÀSTM F1014-92 Standard Specifj.cation for Flashlights on Vesseis.ÀSTM F1020-86 (1996), Standard Specification for line-Blind Valves for Marine Àppl-icationsASll4 FI055-1998 "standard Specification fo¡ El-ectrofusion TyÞe Polyethylene Fittings for outside Diameter Controll-er Polyethyl':ne I¡,STI'I F1120-87 (1993)r standard specification for Circul-ar MeEal-Iic Bellows Type Expansion Joints for Pl-ping ÀpplicationsÀS'I'14 F1122-87 (I992)f Standard Speôification fo¡ Quick Disco¡nect CoupÌingsASTM F1123-87 (1993)r Standar:d Specification for Non-Metalli-,: Expansion Jointså.SfM F1139-88 (1993), Standård Specification for Steam Traps ancì Drains56.60-2ASTM F1155-98 SLandard Practice for Selectiorr and Application af Piping System MateriaisAppendix A; Appendix ts

ASTI4 F1I72-8S (I993), Standard Specification for FueI Oil MeLe¡s Þf the Volumetric Positive Displacernent TypeASTM F1173-95 Standard Specification for Thexmosetting Resin Fiberglass Pipe and Fittings tÕ be Used for llarine ApplicationsAsTI.,1 Fl.I95-94 Standard Specification fo¡ Sliding llatertìght .Dôor AsseinbliesASTl,l F1197-89 (f994)/ Standard Specification for SLiding l.¡atertight Door Control- SystemsÀSTM Fl199-88 (f993), Standard Specification for Ca6t (ÀIl- Temper:ature and Pressures) and Welded P.i-pe Line Strainers (150 psig andASTM F1200-88 {1993)r Standard Specification fo¡ Fab¡icated (l.Ielded) Fipe Line St¡ainers (Above 150 Þsig and 150 Degr:ees F)ASTM F1201-88 {1993), Standard Specification for Fiuid Condi'Lioner ¡ittinqs in Piping Applrcations above 0 DegreeÊ FASTM FJ.Z71-90 (1995). Standard Specification for Spill Valves for U6e in Marine Tank Liquid overpreËsure Protection6 ApplicationsÀS'IM Fl271-91 {I997), Standârd SÞecification for Tank Vent FLame Affeste¡sÀSTt4 F1321.-92 Standard Guide for Conducting a Stability Test (Lightweight Survey and fnclining ExÞeriment) to Determine the Light S

ASTM F1321-98 Standard Specification for Shipboard Incinerators6S,25-9ASTM FL38?-93 Standard Specification far Performance of Mechanj-cally Attached Fittings56.30-25

Append¡x A, Page 25

-U

nC)Þrftn.nlIcloc!C¡q)NT

ÀsTM F1476-95a Standa¡d Specifica.tion for Per:for¡nance of Gasketed Mechanical Couplings for Use in Piping Applicabionss6.30-35ASTM F1546 [or] F 1546 M-96, Standard specification for Firehose NozzlesASTM F1548-94 Standard Specification fox the PerfornLance of Fittings for Use w:-th Gasketed Mechanical coupiíngs, Used in PiÞing Àptr

ASTM F2324-03 "standard Test Method for Prerinse splay valvesr" octÔbeI, 200f.ASTM G2I-90 Standard Pïactice fot: Determining Resistance of Synthetic ?olymeric Materials !o Fungi; and

ÀSTM c23-90 Stanclard practice for operating LighL-Exposule Apparatus (Carbon-Arc TyFe) tr¡trith and l^Iithout Waler for ExPosul:e of Nonme

ASTM G26-?0 ,.Standard Reconunended Practice for Operati-ng Light-and Water-ExPosure ÀPparatus (Xenon-Al:c Type) for ExPosure of NometATSC A/52: "ATSC Standard Diqital Àudio Compressíon (AC-3)," 1995

ATsc A/53 parts 1-6t 2007 "ÀTSc Digital Television Standard"' (January 3t 2007) as listed below:ATSC,\/68Þ: .,ATSC Þïogram and System Infôrmation ProtocoÌ for- Ter:restrial Broadcast and cabler" (Revisiôn B) March 18f 2003f and I¡ATSC A/658: ,,ATSC sta;da::d: p:rogram and System Info¡:mati.on Pr:otocol, fot: Te.rl:estl:ial Rroadcast and Cabì.e (Revision B), " Mal:ch 18' 2t

ATSC A/65C: ,,ATSC program ancl System Information Protocol fol: Terrestrial Broadcast and Cable, Revision c DJith Ànendment No. 1 date

.è.WpA A1-91 Standard Uetnods for Ànalysis of C¡eosote and Oil-Type Preservatives. funerican I'Iood Preservers ÄssocationAI{PA AZ-91 Standard Methods for Analysis of Waterborne Preservatíves and Fire-Retardant Formulations.AWPA Ä3-91 Standard Methods for Determining Penetration of Pr:eservatives and Fi::e Retardants.AWPA À5-91 Standard Methods for Ànalysis of oil-BÔTne P¡ese¡vatives,AI.IPA A6-8g Method for the Determination of oil-Type ?reservatives and water in wood-

.è,f^IpA A7-75 Stanctard Wet Àshing Proceclure fol: PrePâring Wood for Chemical Analysis.Àt{pA A9-90 Standa¡d Melhod for Analysis of T¡eated Wood and Treating Solutions by X-Ray SpectroEcopy.At4pA All-g3 Standard Method for Analysis of îrealed wood and Treatíng solutionE by Àtomic Âbsorption spectroscopy.,AWPA C1-91 Àlf Timber Products-Preservative Treatment by Fressure Processes,ÀI"lPÀ c4-91 Poles-Freservative Treatment by Pressure Processes'ÀI.¡?À Cg-g1 western Red Cedar and AIaska Yellow Cedar Poles-Preservative Tt:eatinent- by the FuIl-Length Thcl:nä1 PTocess.

ÀWpÀ C10-91 Locìgepole Pine Pofes-Preservative Trealment by the Ful1-Length Thermal- Process.ÀI{pA C12-90 Western Larch Poles-Futl-Length P¡ese¡vat-ive Treatment by Thermal Process'AWPA 141-90 Standard for lhe Purchase of Trealed Wood Products'AwPÀ M2-91 Standard for InsPection of lreated Timber Products'ÀwpA M3-81 Standard Quality control Procedules for wood Preserving Plants.AWPA M4-91 Standard for the Care of PreSel:valive-Treated I'lood PToducts.å,1^lpÄ p1/pl3-91 Standard for CoaI Tar Creosote for Land and. Fresh lÍater and Ma::ine (Coastal Water Usê).Al.ilPA P5-91 SLandards for l'laterborne Preservatives'Al.lPA P8-91 Standards for oil-Borne Prese::vatíves'AWPA pg-g1 standards for solvents and Formulations for or:ganic Preservative systems.ÀWs 83.0-41 standard Qualification I'rodedureÀws 83,0*41 Standard Quafification Procedure' ÀI^iS

Àws D1-1-73 À¡rerican welding sôciety structural !.trelcling côde D1-1-73 is available frôn the A¡neriëan welding society, Inc./ 550 N.l'I.

ÀwS Dl .0-l-966 Code {or welding in Building ConstructionAl,ûS D1. 1:2000 Structural Helding code-steelAws D1,4-98 Structural Welding code-Reinforcing SteelÀ.Ws D2.0-69 SpecifícatiÕns for Welding Highway and Railway tsridgesAr.¡s D2.0-69 Specifj.cations for welding Highway and Railway Br:idges' Aws

At¡S D3.6M:1999 Specification for Underwater l¡{eldingÀI^fS D8.4-SL Recommended P¡actices for Àutomotive lrlelding DesignAWS D8,4-61 Recornmended PracÈj.ces for Àutomotive welding De6ign, Aws ,

ÀI,tS D10.9-69 Ståndard euaLificatiôn of welding P¡ocedures and Welde¡s for Piping and Tubing, AÍJS .

ÀWS Dl4.4*72 ,,Classification and Applicalion ôf Welded Joints for Machinery and Equipment"'AI.¡WÄ C207-55, Steel ?i.pe Flanges' 1955 American hrater works SocietyBOCA National Building Code, 1993 Edition'BoCÀ National- Mechanical- Code' 1993 EditionBoCA National Plumbing Code, 1993 Edition'cABo one and Two namiiy Dwelling code, !992 Editionf including the 1993 amendments council- of Àmerican uuilding offiéialsCEÀ-542-B: ,,CEA Standard: Cable Television Channel Identification Plan," JuIy 2003

cEÀ-766-À: "U.S. and Canadian Region Ratíng Tables (RRT) and Content Advisory Descriptors for Transport of content Àdvi60ry rnform¿

CEÀ-931-À, ,,Remote ContrôI Command Pass-thÏough Standard foÌ Home Networking," 2003

CcA 1957 Standa¡d Hose Connection Standard

Append¡x A, Page 26

!woÞmnÞ

Io()ooæOJ

CGÀ 1958,RegulerL,or Connectj.on StandardCGA and RMA (Rubber Manufacturer's AssociatÌon) Specification foì: Rubber lrlelding Hose (1958)CGÀ C-6 (1968) StandardÊ for Visual Ins¡:ection of Compressecl GaÉ Cyl-indersCGA C-8 (1962) Standard for RequaÌification of ICC-3HT CyfindersCGÀ C-3 Standards fot $Ield.ing on Thin-Walfed Steel Cyltnders I I994CGÀ C-5 Cylinder Service tife-Seamless Steel lligh Pressure Cyl-inders, 1991CGÀ C-6 SLandards for Visual Inspect:ion of Steel Compressed Gas Cyt_inders, 1993CGA C-6-1968 andcompressed Gas Assocíat:ion ParnphletscGA c-6.1 Stancìards for Visual Inspection of High Pressure Àluminum compressed Gas Cylindersí 2002. Fourth EditioncGÀ c-6.2 Guídelines for Visual Inspect:Lon and Requalification of Fiber lìeinfotced High p¡essure cylinders, 1996, ,fhird EditiônCGÀ C-6.3 Guj-delines for: Visual Inspect:Lon and Reqr-ral.ification of T,ow Pressur:e Aluminum Compressed Gas Cylinder:s, ,l99:1.

cGÀ c-7 À Guide for the Preparation of Precautionary Markings for Compressed Gas Containers, appencJix À, issuecl 1992 (6th Eclition)CGA C-8 SLandard for Requalification of DOT-3HT Cyiinder Design, 1.985cGÀ c-8-1962CGÀ C-l1:Recom¡ìended Practices for Inspection of compressed Gas cyiinders at Tir(e of Månufacturet 2OOL, Thircì editionCGÀ C-l2 Qualification Procedure for Acetylene Cy-Iinder Design, 1994CGÀ c-]3 Guidel,ines for Periodlc Vísual Inspection and Requalification of Acetylene Cyìinders, 2000, Four-th EclitioncGÀ c-14 :Proceclut:es for Fire Testing of DoT Cyi-inder Pressure ReLief Device SysteÌns I I919cGÀ G-l (1966) AcetyleneCGA G-1.3 (1959) Acetylene lransmission for Chemical SyntheoisCGÀ c-l.4 (1966) Standard for Àcetylene Cylinder Char.ging plantsCGÀ G-7.1 (1966) Corrrnodity SpecificationcGÀ G-8.1 (1964) Standard:tot the Installation of Ni'Lrous Oxide systems at consumer SitesccÀ c-1-19 6 5

cGÀ G-1 .3.-1959cGA G-1 . 4.-19 6 6

cG.A, G-2.2 lentative Standard Method fôr Determining l,linimum of 0.2t Water in Anhydrous Ammonia, 1985CGÀ G-4,1 Cleaning Equiprnent for oxygen Service, 1985cGA G-8 .1--7964CGÀ P-L (1965) Safe Handling ôf CompÌessed GasescGÀ P-3 (1963) Specificaticns, Properties, and Recom¡nendations for Packaging, Transportalion, Storage and Use of tunmonium Nit¡ateccA P-1-1965CGÀ P-20 Standaxd for the Classification of Toxic cas Mixtures, 1995cGÀ s-1,1 (1963) and 1965 Àddenda. Safety Release Device standards--cylínders for conpressed GasesCGA S-1.2 (1963) Safety Release Device Standards/ Cargo and Portable Tanks for Compressed GasesCGÀ S-1.2 Safety Relief Device Standards-cargo and Portabl-e Tanks for Compressed Gasesr 797954.15-25 Compressed cas Àssociation (c(CGA S-1.2.5.2 ¡'low Test of Safety Relief Valves, L979CGA S-1.3 (1959) Safety ReleaEe Device StandardË-compressed Gar Storage ContaínerscGA S-1 Safety Relief Ðevice StandardsCGÀ S-1'1 Pressure Relief Device Standards-Part l{ylinders for Compressed Gases, 2001 (}rith the exception of paragraph 9,1.,1.1)cGA S-1.1 Pressure Relief Device Standards-Parl l{yJ-inders for Compressed Gasesf 2003 (r\Ìith the except-ion of pal:agraph 9.1.1.})cGÀ 5-1.1"-1963 and 1965 addenda andCGÀ S-1.2 Safety Relief Device Standa¡ds Parl 2-Cargo and PcrLabÌe Tanks fo¡ Compressed Gases, I980cGÀ s-1.2-1963cGÀ S-7 uethod for Sel-ecting Pressure Relief Devices for conp.ressed cas Mixtures in Cy;inders / Lgg6CGÀ Technical Bulletín TB-2, Guidelines for InsÞectiôn and Repair of MC-330 and I4C-331 Cargo Tanks, t9B0CI C-1 Dor¡ble Braided Nylon RoÞe Specifications DBN, Januaty 1984.cf Cordage Institute' 350 Lincoln Street, Hingham¡ MÀ 02043, cIÀ-3, Standarcl Test MethoÉls for Fiber Rope Including Stanclard Termin¿cf CRS-I Polyester/Polypropylene Composite Rope Specificaticns, Three-St¡and and Eight-Strand Standard constructj-on, May l9?9;cI NRS-I llylon Rope Specifications, Three-Strand and Eight-Strand Standard Construction, Vay 1979; andcf PETRS-2 Pol-yester Fiber Rope, 3-Strand and 8-Strand constr-uctionE, Januàry 1993; cÕr..dage Instiute'lJ

73c)ÌtTTInÞ

I

c)c)c)-¡c)oo,{r

CI PPRS-2 Polyplopylene Fiber Rope/ 3-Str:and and 8-Strand Ccnstructions, August L992iCISPI-HSN-85, the Specifícatíon for Neoprene Rubber Gaskets for HUB ahd Spigot Cast IronCMÀÀ Specificatj.on 1861, Speci-ications fo¡ Electric Overhead TraveJ.ing CranesC¡ane Manufactulers Association of Àmerj-ca, Inc., Speòification No. 61

Soil Pipe and Fittingg

Appendix A, Page 27

CSÀ Internàtional Standa¡d C390-93, Energy Efficiency Test Methods for Three-Phase Induction Motors , Test I'lethod (1), Input-Outpu'tEI ,,Suggested practices foï Raptor Protection on PoruerLines: The State of the Àrt in 1996"'published by the Edison Electric IngtitEIÀ-608: "Recommended Practice for Line 2l Data Service," I994EIÀ-708-B: 'Digital Tefevision (DTV) Cl-ôsed Captioningr" 7999EIA-744 ,,Transport of Content Aclvisory Information Using Extended Dala Service (XDS)r" f997EIA-455-20 Measurement of Change in Optical Transmittance;EIÀ-455-254 Repeated Impact Testing of Fiber Optic CabIes and Cabl-e Àssemblies;EIÀ-455-308 Frequency Domain ¡4easureTnent of Multimode Optical Fiber Information T¡ansmission Capacity;EfA-455-31.8 Fiber Tensile Proof Test Method;EIÀ-A55-37À Lôw or High Temperature Bend Test fol: Fiber OPtic Cable;nTA-455-41 Co;npress j-ve T,oadì.ng Res,i.stance of F,i ber Optic Cab les;EI.A-455-458 Method for l4easuring Optical- Fiber Geomet::y Using a Laboratory Microscope;EIA-455-464 Spectral- Attenuation Measurement for Long-Length Graded-Index Optical Fibers;EtA-455-4BB MeaEurement of Optical Fiber Cladding Diameter Using Laser-Based InEtrumentÊ;EIÀ-455-51À pulse Distoïtion Measurement of Mul-tinode Glass Opticai Fiber Information Ρ:ansmission Capacity;EIÀ-455-53À Àttenuation by Substitution Measurement fôr l,lultinode G¡aded-fndex optical Fibers or Fiber Àssemb.Iies Used in Long l,enc

EtÀ-455-55Fl End-viev, Methods for rYeasuring Coati¡g and Buffer Gêometry of OÞtical Fibers;EIA-455-58À Core Dia¡neter Measul:ement of Graded-Index oFtical Fibers;EIA-455-59 Measurement of Fiber Þoint Defects Using an OTDR;

EIA-455-61 MeaÊurement of Fiber or Cable Attenuation Using an oTÐR;

EIÀ-455-78À Spectral-Attenuation Cutback Measurenent for Single-Mode Optical Fibers;EIÀ-455-814 compound Fl-ow (Dr:ip) Test for Filled Fiber optj-c cable;EIÀ-455-828 F.luid Penetration Test foT Fluid-Biocked Fiber optic cable;ETÀ-455-85à Fiber optic CabIe Twisl Test¡EIA-455-86 Fiber opLic Cabfe Jacket Shrinkage;ElA-455-89À Fiber Optic Cable Jacket Eiongation And Tensile strength; andEIÀ-455-1.044 Fiber optic cable cyciic Flexinq lest,EIA-455-164A Single-Mode Fiber Measurement óf Mode Fieid Diameter by Far-Fie1d Scanning;EIÀ-455-165Ä Mode Field Diameter Measurenent Near Fiefd Scanning Technique;EIÀ-455-1674 Mode FieId Diameter, Variable Aperture in the Far FieId;EIA-45S-16gÀ Chromatic Ðispersion tr{easurement o{ Multimode Graded-Index and SingIe-Mode optical Fibers by Spectral Group Delay Meas

EIÀ-455-159A Chromatic Dispersion Mea6urement of Single-Mode optícal- Fibers by the Phase-Shift l4ethod;EIÀ-455-170 CabLe Cutoff l¡{avelength of si.ngle-Mode Fiber by Transmitted Power;EIÀ-455-1?3 Coating Geometry Measurenent for Optical Fiber Side-View MethodiEIÀ-4S5-174 Mode Field Ðiameter of SingLe-Mode Opticat Fiber by Knife-Edge Scanning in the rar FieldEIÀ-AS5-175A Chroinatic Dj.spersion Measurement of SingÌe-Mode Optical Fibers by the Differential Phase Shift Method;EIA-45S-1?6 Method for Measuring Optical Fibe¡ Cross-Sectional Geometry by Àutonated Grey-Sca1e enalysis;EIÀ-455-1774 Numerical Apertuïe MeaEulement of Gr:aded-Index Qptical FiberËiEIA-455-17g Meaaurements of StriÞ Force Required for Mechanicaily Removing Coatings from OPticaf Fibers; andEIÀ-598 Color Coding of Fiber opric CablesEJMA llxpansion ¡oini Manufacturers Àssociation Tnc. (EJl,lÀ), Standards of the Expansion Joint l'lanufacturei:s Association. 1980

EMÀ MG1-1993 Motors and Generators , with Revisions It 2t 3 and 4 (El-ectrical Manufactulers Àssociation Standards Publication)¡CI 69-l preEsure RaÈing Standard for: Steam Traps56.60-1r Fl-uld Cont¡ois Institute fnc. (FCI)Fertilizer Institute Standards for the Storage and llandting of Agricultu¡al Anhydrous Anunonia' M-1'¡MER CLass Nu¡nber 31501 Àudibl-e Signal Devices, December, 1974 Factory Mutuaf Engineering and Research, ÀTTN: Libra¡ian, 1151 Bostc¡MER Cl-ass Numbel 3210t Thermôstats for Àutomatic fire Detection' .Tuly, 1978¡MER Clas6 Number 3230-3250: Srnoke Actuated Detectors for Àutomatic Fire AlarÌn Signa.l-íng. Februaryt I976FMER Cfass Numbel:3260: !']-ame Radiation Deteêtors for Àulomatic Fire AÌarm Signaling, Septemberr 1994

FMER Cfass Number 3820: Electrical U¿ilization Equiprneht, SePtenìber, 1979

cag Burning Heating Appliances for Manufactured Homes and Rec¡eational Vehicles, Fourth Edition, with 1998 revisions-epe Etandaid ZITz-g6t gal-culation of cross Heating Val-ue/ Relative Density and compressibility Factor fôr Natural Gas l'{Íxtures fl:ônGÞÀ Standard 226I-00, Analysis for Natural Gas and SimiÌar Gaseous Mixtures by Gas Chromatography, for append.ices D/ F, and G of tlGRI 02l0057 (2002) ,,Internãl Corrosion Direct Àssessment of Gas îransinission Pipelines l4ethodoiogy'"cfI cRI-89/0176 "LNGFIRE: À Thermal Radiation Mode.I for LNG Fires," (June 29r 1'990) Gas Technology Institute (GTI):cTI GRI-96/0396.5 ,,Evaluation of Mítigation Methods for Àccidental LNG Releases, Volume 5: Using FEM3A for LNG Accident ConsequencÉ

Appendix A, Page 28

!æoÞmnÞ

Ioooocoûr

GTI GTI-01:/0049 (April 2004) "L,NG Vapor Dispersion Prediction v¡ith the DEGÀDIS 2.1: Dense Gas Dispersion Model Íor l,NG Vapor DìsperHPVA Structural DeEiqn Guide far Hardwood Plywood Í1al1 PaneIs-HPVA Desi-gn Guide HP-Sc-96t 1996,IADc-Dccs-'l/1991, Guidelínes fcr lndustrial Systen Dc cabl-e for Mobile offshore Ðrilling Units, 1991 International Àssociation of tIAPMO 2003 edition of the Unifôrm Plumbing côdeIAPì.4O ?S 2-89 Maleriaf and Propel:ly Standard for Cast B¡ass and Tubing P-TraÞs- IÄPMO PS 2-89.ÎAPMO PS 4,-90 Material and Property Standard fo¡ Drains for Þrefabricated and Precast Showers- IAPMo PS 4-90.IAPMO PS 5-84 Maherial and Properhy Standard for Special CasL lron Fj.LLings- fAPMO PS 5-84.IAPMo PS 9-84 Material and Property Standard fo¡ Diversion Tees and Twin ltaEle Elborv- IAPMo !S 9-84.IAPMo Ps l4-89 Material and F.roperty Standard for FlexibIe MetaLlic water connectors- IAPMo PS 14-89,IAPMO PS 23-89 Material and lrc,perty Standard for Dishwasher Drain Àirgaps- lAl't4o PS 23-89.TAPl"lO PS ll-9 1. Materia.l- anC Proper:ty Standards for Backf.low Preventio¡ Àssemb.i ies-ÎAPMO PS l1-91 Material and Þroperty Standards fo¡ Backflov¡ Prevenlion Ässembl-les- TÀPMO PS 31-91.IAPMO TSC 9-1997. Standa¡d fo¡ Gas Supply Connectors for Manufactured Homes- ]ÀPMO TSC 9-1997.IAPMO lSC 22-85, Standard fc¡ Porcelain Enanneled Formed SteeI Plunbing Fixtures- IAPMO lSC 22-85.IAPMof Uni.form Mechanical Ccde (2003 Edition)ICC Inter:national Energy cÒnservation code (IECC), 2004 SuppLement Edition, January 2005, Internatiorlal code Council, ISBN 7801S04.ICC Interrnalional. Energy Conservation Code, 2004 Supp1ement Edition, January 2005IcS International Chamber of Shipping, 12 carthusian Stleet, London EclM 6EBr EngJ.and., Guide to Helicopter/Ship opelations, ThirdIEC 56 Hi<¡h-Voltage AlternaLing-Cur¡ent CircuiL-Breake¡s, 1987, (Including Ame¡rdrnent It 1992, Amendnren.L 2, L995, and Amendment 3, iIEC 68-2-52 Basic Environmental Testing ProcedureÊ, Part 2: Tests, TeEt KB: Sal-t Mist, Cyciic (Sodj-urn Chloride Solution), 1984x IEC 79-0 Electrical Àpparatus for Explosive Gas Àtmospheres, Part 0r General RequireTnents, 1983 (Incl-uding Amendment 2, i991\IEC 79-1 Electricai- Àpparat.us for Explosive Gas Àtmospheres, Part 1: Constructj-on and Test of Flainepl:oÕf Enclosures of Electr:ical J

IEC 19-2 El-ectrical Apparatus for Explosive Gas AtmosÞheres, ?ar:t 2: EiectTicaf Àpparatus-Type of Protection "p", 1983IEC 79-5 EÌectrical- Àpparatus for Explosive Gas Àtmospheres, Part 5: Sand-Fil-led Àpparatus. First Edit:-on (L967), lncorpor:ating th€TEC 79-6 EfecL¡ical Àpparatus for Explosive Gas ÀLmospheres, Part 6: Oil-fmers-ion'o', 1^995lEC 79-7 lllectrical Apparatus for Exploeive GaË Atmospheres, Þart 7: Increased Safety "e", L990 (lnc.Iuding Amendment 1, L991, and ffEc 79-11 Electrical Apparatus for Explosive Gas Atnospheres, Part 11: Intrinsic Safety "i", I99IIEC 79-15 El-ectrical- Apparatus for Expiosive Gas Àtmospheres, Parh 15: Efectl:ica.I Àpparatus with Type of tsrotection "n", 1987IEc 79-18 Electrical Apparatus for Explosive Gas Atmospheres, Part 18: Encapsrrialíon "m" I 1992IEC 92-3 llÌectrical InstaLl"ation in Ships, Pa¡t 3: Cables (constructi.on, testing and instal-Lations) Second Edition, 1965. as amendeIEC 92-101- El-ectrical InsLallations in Ships, Part 101: Definibions and Generai Requirements, 1994 (Including Amendnent 1, 1995)IEC 92-201. Electrical Installations in Ships, ?art 201: System Design-General 1991raBË,92-202. Electrical- InstaLlations in Ships. Part 202: system Design-ProtecÈion, 1994IEC 92-301. Elect¡ical Installations in Ships, Part 301: Equipnent-Generators and Motors, 1980 ltncl-uding Amendment Lt I99+, anC ÀneIEC 92-302 nlectrj"cal Installations in ShiÞs, Part 302: EquiprnenÈ-S\ritchgear and Contr:olgear Assenbl,íes, 1980 (Including l\mendmentIEC 92-30:Mectrical- Instal.l-ations in Ships, Part 303: Equipment.-Transformers for Power and I.lghting, 1980IEC 92-304, Xlectrical Inst,allations in Ships, ParL 304: Equipnen.t.-Semiconductor Converters, 1980 (fncluding "A".nendment l-, i-995)TEC 92-306 Electrical Instal.Iations in Shipe, ?art 306: Equipnent.-Luminai¡es and Accessories, 1980TEC 92-350 Efectrical Instal-lations in Ships, ?art 35ûr Low-Voltage Shipboard Power cables-General construction and Test llequj-renerIEC 92-352 lllectrical Instâl-lations in Ships, Fart 352: Choice and Installation of Cabies for Loer-Voltage lower Systens, 1979, (lnrIEc 92-353 Electrical Instaffations in Sh-ips, Part 353: Sing1e and Mufticore Non-radiaÌ FieId Pov¡er Cables with Extruded Solid Insr:IEC 92-401- El-ect¡ical Instaflations in Ships/ Part 401: InstaLlatÍon ancl Test of Completed InstaLl-ation, 1987IEC 92-501- Electrical InstallaLions in Ships, Part 501: Special leatures-Electric Propulsion Fl-ant, 1984IEc 92-5Ð2 Electrical Inst.allations in Ship6, Part 502: Tankers-Speciai Feature6, 1994IEc 92-503 El-ectrlcaL lnstaLlations in Ships, Part 503: Special Ieatures-A.c. Suppiy systems with Voltages in the Range Above LKV u

IEC 92-504 E1eôtrical Installations in Ships, I'art 504: Special Features{ontrol and InslrumentaÈión/ tg94IEC 179 errtit.Ied "Preci6ion Sound Level Meters," dated 1973.IEC 225 entitfed "Octave/ Hal-f-Octave, Thircl Octave Bànd Filters Intended for the ÀnaLysis of Sounds and Vib¡ations," dated 1966.IEC 309-L--Plugs Socket-Outlets and Coupl-ers for Industrial Purposes: Part 1, General Requirements, I979IEC 309-2--Plugs Socket-Outlets and CouplerB for Industrial Purposes; Par.L 2, DimensionaL lnterchangeabJ-Irty Requirements for Pj-n arIEc 331 Fire resisting characte¡istics of electric cables I L970IEC lf2-1 Tests on Electric Cables Under Fi.re Cohditíons, Part I: Test on a Single Vertieal- Insulated Wi¡e or Cable, 1993IEC 332-3 Tests on El-ectric Cables Under Fire Conditions¡ Part 3: Test on bunched wires or cabies, 1992IEC 363 Short-Circuit Current EvaLuation with Special Regard to Rated Sho¡t-Ci¡cuit Capacity of Circuj-t-Breakers in lnstalLations jIEC 529 DÉ:grees of protection Frqvided by enclosures (IP Code) 1989

Appendix A, Page 29

1tv,c)!rnl7'Þ

Ic)ac)ctcûgl

IEC 53J Electrornagnehic Compatibility of Electricai and Elect¡onic Installatj-ons in Ships, L977

IEC 561 enti¿led,,Elect¡o-acoustical Measuring Equipnent for Aircraft Noise Certification," firat edition, dated 1976.

IEc 651 entltled "Sound Level Meters," fltsf edition. dated 1979'rEc 705,'Methods foÌ Measuring the performance of Microwave ovens for Household and similar Purpôsesr" Section 4, Methôds of Measur

IEC 705 Àmendment 2, ,,Methods for: Measuïing lhe Peïformance of l{ícrot¡ave Ovens for I'lousehoÌd and Similar Fulposes," Section 4' }1et}

IEC 804 entitlecl "Integrating-averaginq Sound Level Meters¿" first edition, dated L985.IEC g47-Z Lovr-Voltage Switchgear and Controlgear. Part 2: circuit Breakers, 7989 (Includinq Anend¡nent 7, 7992 and tunendnent 2' 199:

IEC 1092-1 Ed 1,0, ,,G1oba1 Marítime Distress and Safety SyËtem (GI4DSS)-Part 1: Radar tranEponder-Ma¡ine Search and Rescue (SART)-{tIEC 13g18-1:2000(E)i ,.Information Technology Generic Coding of Moving Pictures and Àssociated ^Audio Information: Systems/" 2000

IEc 60034-1 (1996), Rotating efectrical machinesf Pål:t 1: Rating and performanõe r r.rith Amendment I (1997), Sectiôn 3: Duty , clausTEC Êi0014-12 (.1.980), Rotat-íng electrícal rnachínes, Paït :l 2: Star:tiñg per:formance of s:i ngle-speed thr:ee-phase cage i.nductjon ñotorsIEc 60050-411 (1996)r Intern;tionai Electrotechnical Vocabulary chapter 41.1: Rotating machines , sections 411-33-07 and 4LI-37-26,IEc 60022-1 (1991), Dimensj-ons and output Series for Rotating Electrical Machines-Part 1: Fraine numbers 56 to 400 and flange nurnber

- IEC 600?g-0 Fourth Êdition, 2004-01) , Electrical Apparatus for Explosíve Gas Atmospheres, Part 0, General Requirements (

- IEC 60079-1 rifth Edition, 2003-11) Electtical Apparatus for Expiosive Gas Atmospheres, Part l¡ FlaÌneproof Encl-osu::es "d" (

IEC 60092-101 Edition 4.It "E)-ectrical installations in ships-par-t l-01: Definitions and general" requirements"'Àugust 2002.

IEC 60533,,D.lectr:ical and electronic ínstaLlations in ships-Electromagnetic conpatíbilíty"'November:1999-].EC 60942 entitl-ecl "Electroacoustics-Sound Calibrators," edition 2.0' dated 1997.IEc 60945 ,,Maritime navigation and radiocommunication equipment and systems--Gene¡al- requiremen.bs-Methods of testing and required tÉ

- IEC 61094-3 entitled ,,Meaeurement Microphones-Part 3: Primary Method for Free-FieId Calibration of Laboratory Standard Mlc::ophone

- IEc 61094-4 entitled ,,Measurenent Microphones-Part 4t Specifications for Working Standard Microphones", edition 1.0, dated 1995.IEC 61094-3 entitled,,Measutement Microphones-Pat:t 3: Primary Method fo¡ Free-Field Calibration of Laboratory Standard MicrophonesIEC 61094-4 entitled,,MeasuïeÌnent Microphones-Pal:t 4: Specificalions for l,¡orking Slandard t"fj.cÍophones", edition 1-0, dated 1995.

IEC 61097-3 Ed l.0r ,,GlobaL naritime dist::ess ancÌ safety system (GMDSS)-part 3: Digital selectj-ve cal-1:ng (DSC) equipnent--OperatiorIEC 6L097-4 Ed 1,0, ,,Global mariti¡ne distress and safety system (GMDSS)-parl 4: INMÀRSÀÎ{ Ship Earth Station and fNMARSÀT enhancec

TEC 61097-5 First Edition,,Global maritime dist¡ess and safety EyEtem (GMDSS)-part 5: InmarEat-E Emergency position indicating radJrEc 61097-6 "GLobal maritime distress and safety system (GMDss)-part 6: Narrof'¡band direct-printj.ng teleglaph equipment for the recc

IEC 61097-7,,G1obal rnaritime distress and safety system (Gl'lDSS)-part 7: Shipborne VEF radiotelephone trãnsmitter and receíver-OPer¿IDC 610g7-g Ed 1.0¿ ,,Global Maritime Dislress and safety system (GMDSS)-Part 8; Shipbolne watchkeeping receivers for the receptionIEC 61097-9 Ed 1,0r ,,GLobal- Maritirne Distress and Safety System (GMDSS)-Part 9: Shipborne Transmittel:s and Receivers for Use in theIEC 61097-10 Ed 1.0, ,,GIobaI Maritime Distress and SafeLy System (Gl"lDSS)-Parl 10: INMARSÀT-B Ship Earth Station Eguipmenl-Operatior:jEC 6LOgl-j-Z Ed 1,0, ,,GlobaI marítime distress and safety system (GMDSS)-part 12: Survival craft portable two-way VHF radiotelephorrEc 61097-13 First editionf ,,Global- maritime distress and safety system (GMDSs)-part 13r INMÀRSÀT F77 ship earth statj.on equipment-IEC 61162-1 Secónd Edition, ,,Maritime navigation and radiocommunication equipment and systems-Digital interfaces-tia.rt l: Singl"e ta!IEC 6I162-100 Edition 1,0¡ "Mat:itime navigation and radiocomrnunication equípment and systems-Digital inteÏfaces-Parl 100: Singie te]-¡rC 6LZ6O entitled ,,Electroaéoustics-Octave-Band and Fraêtiona-t-Octave-Bå.nd fiLters", edition 1.0¡ clated 1995.

IEC 6LZ6S enti.Lted ,,Instt:uments for Measurement of Aircraft Noise-Performance Requirements for Systems to Measure one-Third-octave-ïEc 61993-2 Firet Edition, ,,Maritime navigation and radiocommunication equiprnent and systems-Autornatic identification systems (Àrs)IEEE 32-7972IEEE 45-1977 Recommended Practice for Eleclric Installations on Shípboard

- IEEE 45-1983 TEDE Recommended Practice for Electric Instal.Iations on Shipboal:cl/ 1983

- IEEE 100-1992 The New IEEI Standard Dictionary of El,ectrical. and ElectÌ-onics Terms, 1992

- IEEE ILZ-LI96 Tesl Frocedu¡e for polyphase Induction Motors and Ge¡rerators , lest MeLhod Br Inpu.L-output tvj-th Loss Segl:egation ,

IEEE 320 Applicatíon Guide for Àc High-voltage circuit Breakers Rated on a syiTùnetr:cal curtent Bas:.s (ANSr/IEEE C37.010-79\t L979

IEEE 331 A¡¡lication cuide for Lov¡-Vo1ta9e Àc NonintegraLl-y Fused Power ciTcuit Breaker6 (Using separately Mounted current-Linitinç- IEEE 455-IgB5, IEEE Standard Test procedure for Measuring Longltudinal tsalance of TeleÞhohe Equipnent operating in the voice tsan.

IEEI 730-1989 Standard for Software Quality Àssurance PlansIEEE 1202-1991 IEEE Standard fo¡ Flame Testing of cables fôr use in cable lray in Industrial and conmercj-aJ. occupancies, 1991

IHo Technical Resolution A3,11-"ENC/SENC Distribution OFtion", as published in the "Resolutions of the International ttydrographic (

IIT Il1inoís InEtitute of TechnoLogy Research Institute (IrT) Reportr "Development of MobiLe Home Fire Test Methods to Judge the FjIllurninating Engineering society LM-9-88/ "IES Approved Method fôr the Electricaf and PhÕtometriÕ Measurements of lluorescent Lanps

Illurninatinf nngineerin! society of North Àmerica Lighting Handbook, Reference and Appiicatiôn, 8th Editiônr 1993' chapter 6' LightïLLurninatint engineerin! society of North Àmerica LM-16-1993/ "TESNA PracticaL Guide to Colorimetry of Light sources"- Illuminating lngineering Society of North À¡ne¡ica LM-20-L991,'IESNÀ Approved Method fôr Photometri.c Testing of Reffector-Type L¿

Illuminating Èngineering Society of No¡th Ànerica LM-45-91, "IES Approved Melhod for Eiectrica.l and Photometric Measurements of Ge¡

Appendix A, Page 30

'ttnomÃ

I oo()J()æ\¡

- III-uminating Engineering Socj.ety of North Àlnerica LM-58-l-994, "IESNA Guide to Spec.t-roradioneì-ric l,leasuremenLs"I1!-unínat,ing Engineering Socíety of North Àme¡ica LM-66-1991, "IES Approved Melhod for the Electrical and Photometric Measurem,entsIME lamphLet No. 17, 1960, Safety in the HandLíng and Use of ExÞlosivesIMo À.264(VIII) Àmendment tô chapter VI of the InternatiÕnâl Convention for the Safety of Life at Sea, 1960, ResoJ"utic,n À.264(VIIIjrMo À.265 (vrTr)IMo å,.328(IX) Code for the Construction and Equipinent of Ships Carrying Liquefied Gases in Bul,kr 19?6fMO 4.414 (XI) Code for Co¡rstruction ancl Equipmenh of t"lobiÌe Offshore Drilling UniLs.IMO 4.467(XII) tnternational l4aritime OTganization (TMO) 4.467(xII), Guideìines for Àcceptance of Non-Dìrplicated nudder Àctuators IIMo À.520(13) Code of Practice for the Evai-uation, lesting and Àcceptance of Prototype Novel L:fe-Saving Appliances and ÀrrangementIMO À.520(13) code of Þractice fôr the Evaluatiônr Testing and Àcceptance of lJrotôtype Novel Life-saving Appliances ànd Àrïãngemen1lMO 4.515(1.1) Fecommendatjons on Emer:gency Towi,ng Requirement.s for Tankelrs, Novenrber 17, l98lIMo À.649116) Code for the Const¡uction and Equipinent of Mobiìe offshore Drilling UniLs (MoDU Code), 19 october 1989 with a¡r,enclrrenìIMO .A'.654. (16) Graphical Syrnbols for Fi::e ControL PlansTMO 4.657(76) Instruct,íons for Action in Survj.val Crafl, 19 Novenber 1989TMo À.658(16) "Use and Fitting of Retro-Reflective Material6 on Life-Saving Àppliances", dated Novembet L9B9IMO À.688(17) I'ire Test Procedures For l-gnitability of tsedding components, ResoÌuti-on Ä,688(l?), dated 06 November 1991TMo 4.689(17)-Recommendalion on Testíng of l,ife-saving Appliances, 27 November I991, including amerdments through ResoLution MSC.51fMO À.739(18) Guidelines fot: the Authotj-zation of Organizations Àcting on Behå.lf of the Acìministration, ìIovernber- 4/ 1993IMO À.741(18) International ManagemenL Code for the Safe operaL.ion of Ships and for ]¡o:Iution Prevention, November 4, 1993fMO 4,753(18) Guidelines for the Applicartion of Pl-as',ic Pipes on Ships56.60-25IMo 4.750(18) "Synbo1s Related to Life-f;avj-ng Àppliances and Arrangenents", dated 17 November 1993IMo À'788 (19), Guidelines ôn lmplementation of the lnternàtionaL Safety l,lanagenent (ISl4) code by Àdministrations, NoverJf,er ?3, IgtTMo À342(:IX) Recommendation on Performance Slandards for Ä.utomatic Pi]-ots, adopted November 12l 1975IMo Circular 443, Measures to Prevent Unlawful Àcts.Against Passengers and Crews on Board Ships September 26¿ 1986IMO Code For Exist,ì-ng Ships Carrying Liquefied Gases in Bul-k. 1976IMo Conference ¡esolution il, Adoption of amendments to the Ànnex to the TnteÌ:national- Convenlion for the Safety of Life at Sea/ t9;IMo Inter-Ìlational convenlion for the Safety of Life at Sear 1974 (soLAS 74) Consolidated Edition, (Inciuding 1992 ¡r,endments to solIMO Medical Fi.rst Àid Guide for Llse in ¡\ccidents Involving Dangetous GoodsIMO ì'IDPC.59(13) Revised Guidelines for the fnpìenentat.ion of Annex V of MARPOL 13/7563.25-9IMO MSC C:ircular 599, Revised Guidelines fÕr Passenger Safety Instructionsr 17 July I995IMO MSC,4(48) Inlernational- Code for the Construction and Equipmen.b. of Ships carryinc_¡ Dangerous Chemicals in Bul-k (IBC Code), 1994TMO MSC.5(48) International Code for the Construction and Eguipment of Ships carrying Liguefied Gases in BuIk, (IGC Code), 1993IMo MSc.35(63) Adoption of Guidel-ines for Emergency Towing Arranqement on Tankers, May 20, L994IMo MSc,74169) Annex 3, Recommendation on Pelfornance Standards for a Universa: Shipborne ÀutÒmaÈic Identification Systen (AISlr acIMO Publication No. 240-Et lnternatiohaÌ Code for the Safe carriage of Grain in BulkIMO Seafarer's Training, Certi:ication and Watchkeeping Code (STCW Code)IMo SN/Circ.227 Guidelines for the Instal.lation of a Shipborne Automai-ic Identificatìon System (ÀIS), daLed January 6, 200JfMo SoLAS International Convention for Safety of Life at sear L974, and 1988 Pr:otocol lelating thereto, 2000 Amendments, effectiveIMo STcw-The International- Convention on Standards of Training, ceÌtifrcation and tlatchkeeping for Seafarers, 1978, as amended, (51IMO Synbo-ls Related to l,ife-Saving Àppìiances and Àr¡angement.s, Resolution À.760(18), daÈed L? November 1993TMO Use and Fitting of Retr:o-Reflective Materials on Life-Saving Appliances, Resolution À.658(16), dated 20 November 1989INÀISBSIEQ nådvextent Interchanç¡e PayLrack (WEo-007, VersiÒn 000, January 15, 2005, q'ith minor cotrections appJ-iecl Ma¡ch 25¡ 2005, arInLe¡naLional- Code of BoÈanical Nomenclalure (Tokyo Code), 1994 edition, a pubiication of the International- Àssocìation for Þlant 1

fSA RP 12'6, Wiring Practices :or Hazarclous (Classified) LocationË Ingtrumentation Part- I: Intrinsic Safety, 1995, The Internation¿ISo 307-1984(E) "Pl-astics-Polyamides-Determination oi Viscosity Number,',ISO 535-1991(E) Paper and board-Deter:mj-nation of wateÌ absorptiveness-Cobb methodfSO 1496-1: L990 (E)-Series 1:reighÈ containers-Specification and testingf Part L: General- cargo containers. I¡ifth Editíon¡ (AugusISO 1496-3-Series 1 freighl containers-Specification an¿l testing-Part 3: Tank containers for liquiclsr gases and pressurized dry buJISo 243I-1984(E) Standard Cup MelhodISO 2592-"1973(E) Petroleun products-Determination of flash and fire points--Cleveland open cup methodISO 2919-1980 (E) Sealed radioactive sources--CLassificationISO 3036-1975 (E) Board-DeteÌ¡nination of Þuncture resistanceISO 3574-1986(E) Cold-reduced carbon steel sheet of commercial and drar,¡ing quaìitiesISO 3791 "Office Machines änd Data Processing Equipment-Keyboard Layouts for Numeric Applicatì-ons/" First Eclition 1976{E}.ISO 3807-2 Cylinders for acelyì.ene-Basic requirements-Part 2: Cyl-inders lrith fusibie piugs, ¡irst edition, March 2000, (E)

Appendix A, Page 31

1J7Ac)Ìtm7J

Ic)c)o-tc)ooo0

ISO 4126-1 Safety valves-Pa¡t 1: General Requirements, Dece¡nber 15, 1991, First EdiLionISO 6406 Gas cylinders-Seamless steel gas cylinders-Periodic inspection and !esting' Second edition' February 2005' (E)ISO 6892 Metallic materials-TensiLe lesting, JuIy 15. 1.984, FLrst EditionISO 7ZZ5 Gas cylindeïs-precautÍônary labels, First edition, Nôvember 1994' (Corrected and reprinted Àugust 1995)' (E)tso 7866 Gas cy1índers-Refillable seamless aluminum alloy gas cylinders-oesígn, construclion ancl testing, First editíon' June 1999,ISO 8115 Cotton bal-es-Dírnensions and density, 1986 EditionISO B1?B-4t 7996(E), ReciprocaLing Internal Combustion Eng.J-nes-Exhaust Emission MeasurelnenL-Part 4r Test Cycles fo¡ Diffe¡ent EngirISO 8316 t \987 (E) Mea6urement of Líquid Flov¡ in closed Conduits-Method by Collection of the Liquid in a Volumetric TankISo 9809-1: Gas cylinders-RefilIable seamLess steel gas cylinders-Design. construction and testing-Part 1: Quenched and tempered stISo 9809-Z: Gas cylinders-Refil-lable seamless steel gas cylinders-Design, construction and Èesting-I'ari- 2t ouenched and temPered s1

TSO 9g09-Jr Gas cylì-nders-Refj.1.l abl.e seamless steel gas cyl:inders-Desjgn, constl:uctj.on õnd testjng-Part 3: Normaljzed sfeel. cyì.i.ndeISO 9931 (December, 1991) "Coaì.-Sanpling of PuLverized Coai Conveyed by Gases in Direct Fired Coal Systems¡" fBR apFroved May 23, 1

ISO 9978:1992(E)-Radiation protection-Sealed ¡adioactive sources-Leakage test methods. First ndition' (February 15, 79921

ISo 10297 Gas cylinders-Refillable gas cylinder valves-Specification and type testing, First edition' I'fay 1999' (E)ISO 10461 Gas cylinders-Seamless alurninum-aIloy gas cyiinders-Periodic inspect.ion and testing' Second edition' February 2005' (E)ISo 10462 Gas cylinders-Transportable cylinders for dissolved acetylene-Periodic inspection and maintenance, Second editíon, Febru¿ISO 10602:1995(E) Februal:y 1r 1995, Second edition, Photogr:aphy-Processed silver-gelatin type black-and-¡r'hite fiJ-lrSpecifications iISo 11114-1 Tr:ansportable gas cyLindel:s-Cornpatibitity of cylinder and val-ve materiaLs with gas contents-Þart 1: Metallic mate::ia1s,ISO 11114-2 Transportable gas cylinders{ompatibility of cylinder and valve ¡nate¡ials vrilh gas contenLs-Þart 2: Non-metallic materjISo 11117 Gas cylinderÊ-vaÌve protection caps and valve guardF for induÊtria1 and medical gas cylinders-De6ign, con6truction and t€ISO 1111g Gas cylinders-Non-refillable metallic gas cyi-inders-Specifj.cation and test nethods/ First edition, October 1999' (E)ISo 11119-1 Gas cylinders-Gas cylinders of composite construction-Specification and test methôds-I'alt 1: Hoop-wrapped composite gas

ISo 11119-2 Gas cylinders-Gas cylinders of composite constructíon-Specificalion and test methods-ParL 2: FttIly wrapped fibre r:einfcISo 11119-3 cas cyl-inders of composite constluction-Specification and test methods-Par:t 3: Fully wrapped fitrre reinforced compositeISo 11120 Gas cylinders-Refil]-ab1e seamless steel tubes of water capacity between 150 L and 3000 L-Design' construction and testinçISo 11621 Gas cy1índers-ProcedureÉ for change of gas service' First edition, April L997, (E)ISO 11623 Transportable gas Õylindeïs-Periodic inspection and testing of cornposite gas cyfj-nder-'6/ Fir-st edition, March 2002, (E)ISO 13256-1 published in l9gg, ,,water-sotìrce heat pumps-Testing and lating for performance-Part 1: I¡¡ater-tô-air and brine-to-air h¿

ISO 13617 (1995)63.25-9 Shipbuilding-shipboard Incinerators-Requirements/ISO 1g911; 2000(E)r First edition, Novenber 1/ 2000, Imaging ¡nateriaLs-Processed safety photographj.c filrns-Storage Þl:åctices.ITU (?¡ Third Edition of the International Special Committee on Radio Interference (CISPR), P,¡b' 22, "Information Technology EquipnITU E.161, ,,Arrangement of Digits, Lettel:6 and Symbols on Telephone6 and Other DeviceE that Can Be Used for Gaining AccesE lo a TelITU E.164,1,,Se¡ies E: Overall Net!¡ork Operation¡ Telephone Service, Service Operation and Human Factors; Operationf Numbering/ Ror

ITU M,476-5 "Dlrect-printing relegraph Equipment in the Maritime Mobile service," vrith Annex' 1995, orITU M.492-6 ',eperational pïocedures for the use of ÐiTect-Printing Telegraph Equipment in the Maritime Mobile Service"'ITU M.493-1l,,Digital Selective-calling system for use in the Maritime Mobile Service," with Annexes I and 2r 2004¿ and

ITU M.493-11 ,,Digital Sel-ective-cal-1ing Systein for Use in -L.he Marilirne Mobile Ser:vice," v¡iLh Ànnexes 1 and 2, 2004'ITU M.540-2 ,,opeiational and Technical Characterístics for an Automated Direct-printing TelegraPh System for Prornuigation of NavigetTU M.541-9 ,,olerational procedu¡es for the use of DJ-gital selective-calling Equipment in the Maritine MobiIe service," with Annexe

ITU M.541-9 ,,oþerational procedu¡es for the Use of Digital selective-calling Equipment in Lhê Maritime Mobile Service," with Ànnex€

ITU M.541-9 ,,olerational pïocedures for the use of Dígíta1 Selective-Calling Equipnent in the Mal:itiTne Mobile Service"'r+íth À.nnext

ITU M.625-3 ,,Direct-printing Telegraph Equiprnent Employing Automatic Identification in the Maritime Mobil-e Service," with Ànnex' 1ç

ITU M.625-J ,,DirecL-printing Telegraph Equipment Empl-oying Àutomati-c Identification in the l4aritime Mobile Service," r.¿ith Annex, 1!ITU M.625-3t,,Direct-printing Telegraph Equipment Employing Automatic Identification in the Maritime Mobile Service," with Annexr iITU M.628-3 ,,Technical Characteristics for Search and Rescue Radar Tr-ansponders," l¿ith Ànnexes' I994'ITU M.633-f, "Transmission characteristics of a satellite emergency position-indicating radiobeacon (sâtellite EIIRts) system operatitTU M.g2l Optionaf Expansion of the Digital SeÌective-Cal-ling System for Use in the Maritime Mobile ServÍce, lg92ITU M.824-2 "Technicaf Parameters of Rådar Beaêons (R.ACONS)," vrith Annexesr 1995.fTU M.gZ5 CharacèeriÊtics of a Ttansponde¡ System Using Digital Selective-Cal-ling Techniques for Use with VesseI Traffic Se¡vices ¿

ITU M.IL71-3,,Techniques for measurement of unrvanted emis6ion8 of radar systemsr" including Annexes 1 and 2 and a1I apPendiceË' 20(ITU M. !37I-L Technical chaïacteristics for a universal Ehipborne autorìatic identification system using tine division multiple acêes

LR Lloyd,s Register of shipping (LRl-100 Leadenhal-i street, London EC3À 3tsP,/ Rules and ReguLations for the classification of ShipsLR Lloyd,s Register of shipping supplemental Requirements, I9 september 1998LR RuLes and Regulations for the Classification of Yachts and Smal,f Craft/ as amended through 1983

LR Type Àpproval System; TesL Specification Number f, 1990-161.002-4(b)' Lì-oyd's Register

Appendix A, Page 32

-onomn

IoooJ(f

corl,

l"lSS SP-6-85 Standard Finishes for ContacL Faces of Pipe llanges and Connecting-lnd Fl-anges of Val-ves and FiL.t'ings - VanufacturersMSS SP-9-R7 Spot Facing for: Bronze, Iron and Steel FlangesMSS SP-25-78 Standard Markíng System for Valves, Fitlings, Flanges and Unionst L978, Manufactu.rers StandardÍzation Socj-ety (MSS)I'lSS SP-25.-88 Standard Mar-kj-ng System for Valves, Fittings, Flanges and UnionsI'ISS SP-44-85 Stee-I Pipe Line F-ange6I'ISS SP-45.-87 ByÞãss and Drain Connection Standardl"lsS SP-51-86 Cl-ass 150LI,J Corrosion Resistant CasL Flanges and Flanged FiLtingst"lSS SP-s5.-85 Quality Standard for Steel- Castinge for valvesf FlangeË and Fitrings and other Piping ConponentsMSS SP-58-83 Fipe Hangers and Supports-l'lateriais. Ðesign and ManufaetureMSS SÞ-61-85 Pressure TesÈing of Steel I.¿a1vesI'lSS SP-67-8J Butterfly ValvesMSS SP-69.-83 Pipe Hangers and Suppo::ts-Se1eclion ancl Applicationl"lSS SP-72-87 Ball Valves with Flanged or Butt-Welding Ends for General ServiceMSS SP-73-86 Brazing Joints for Wrought and Cast Copper Alioy Solder Joint Pr:es6ure 3íttings- MSS SP-75-2004 "specification for Higir Test Wt:ought Butt WeLding Fittings"l.lSS SP-83'-87 Steel Pipe Un-ions, Socket-t/¡elding and Tl'LreadedI'ISS SP-44--1996 (Reaffirmedi 2001) "Steel- Pípe Line Fl.anges."NACE RP0l69-2002 "Control of External Corr-osion on Underground or Submerged Metal.J-ic Piping Systens"NACE RP0502-2002 "Pipeline External Corrosion Direct Assessment MeLhodology"NÀESBWEQ l'lEQ-00I Nort.h Àmerican Enerqy $tandards Boal:d t¡hoiesal-e Eiectric QuadTant , Business Praclices for OÞen Acce6s Same-Time lI.IAESBWEQ I'IEQ-002 Business lractices for open,\ccess Same-Ti.me Information systems (oASIS) Standards & corì¡îunication Protocols (wEe-NAESBWEQ l.lEQ-003 open Àccess Sa¡e-Tj.Tne l:nformation Systens (oÀSIS) Data Dictionary (WEQ-003, Version 000, January 15, 2005, with in-iNAESBÍ{EQ IIEQ-004 Coordinate Interchange (IIEQ-004| JDne 22, 20061¡NAESBÍ{EQ I'IEQ-005 Area Contr:ol Errot (ACE) Equation S¡:ecial Cases (WEQ-005, Version 000, January 15, 2005/ with minor corrections a¡NAESBfrIEQ I{EQ-006 Manual Time Error Co¡¡ection (WEQ-006, Version 000, JantLary 15, 2005, lv.iLh minor correcrions appl-Led luta¡ch 25, 20(.NAESBWEQ I{EQ-011 Ga6/Electïic Coordination Standards (tlJfQ-o11, Version 1, as adopted in Recommendation R04021 July 8/ 2005}.NE¡.ÍA 2,3 19837 InsLructions for the Hanclling¡ Installation¿ operationr and Maintenance ôf MÒtor control- centers, 1983NEMA 2.4' NEI4A and IEC Devj-ces for Motor Service-À Guide for Unde¡standing the Differences¡ -I989I'IEMA 250, Enclosures f or Electrical Equi-pment (1000 Volts t"Iaximum) r 1991NEMA EW-1 (1962) Reguirements for Electric Àrc [,IeJ-ding Â,ÞparatusNEMA ICS 2, Industrial Cont¡o1 and Systems Controllers, ConLr:actors, and Overload Relays Rated not rno¡e than 2000 t¡olts ÀC or ?50 \NEMA MG1-1993 Motor6 and Generators , wiÈh Revisione It 2, 3 and 4,Ì.IEMA t^¡c-3/ Rubber Insulated Wire and CabLe for the Transmission and Distrj.bution of Electrical Energy, 1980 (with revisj-ons througÌNEMÀ l{C-8, Ethylene-?ropyJ-ene-Rubber-Insulated Wire and Cable for the Transmission and Distribution of Electrical.[jnergy/ l9g8 ($ritNFPA 10-1994 Standard for l¡ortable Fire Extinguishers (1994 Edition).NFPA 10-2002 Standard for lortabl-e Fire ExtinguishersNFPA 11-2005 Standard for: Low-, Medium-, and High-Expansion FoamNFPA L2-2005 Standard on Cärbon Dioxide Extinguishing SystemsNFPA 124-2004 Standard on Halon 1301 fire Exti.nguishing SystemsNFI'A 13-1996 Standard for ì:he:nstallation of Sprinkler SystensNFPÀ 13-21)02 Sta[dard for the ]nstallatj-on of Sprinkler SystemsNFPA 14-2003 Standa¡d for the InstaLLation of Standpipe and Hose SystemsNFPA 15-2001 Standard for 9Jater Spray Fj.xed Systems for Fire prob.ectionNFPA 17-1985 Dry Chemical Extinguishing SystemsNFPA 17-1994 Dry ChenicaL Extinguishing SystemsNFIÀ 17-2t102 Standa¡d for D¡y Chemícal Extinguishing SystemsNFPA l7A-.t986 Wet Chemical ExtrnguiÉhinç¡ SystemsNFPA 174-1994 Wet Chemical Ext:nguishing SystemsNFPA 20-1996 Standard for the Instal-latj-on of Centrifugal Fire Pump6 (1996 Edition).NFPA 25-21102 tnspection, Testing, and À{¿rintenance of water-Based Fj-re Protection SystemsNFPA 30-1969 Flarn¡nabl-e and cômbustibl-e Liquids CodeNF?A 30-1993 Flammabl-e and Combustible Liquids Code, 1993NFPA 30-2003 "FlammabIe and Combustib]-e Liquids Code"NFPA 31-1997 Standard for the Instal-l-atj.on of OiI Burning Equipment, N¡'På. l1-1997NFPA 32-1970 Standa¡d for Dry Cleaning Plants

Appendix A, Page 33

'11

nc))rilNÞ

I

c)c)c)c)()c)

NFpÀ 33-1969 Standard for Spray Finishing Using flarr,rnabLe and Combustible MaterialNF?A 34-1966 Standard for Dip Tanks Containing FlammabIe or Combuslible LiquidsNFpl\ 34-1995 Standard for Dip Tanks containing F1ammabIe or combustible LiquidsNFPA 35-1970 Standard fór the Manufacture ôf organic coatingsNFPA 36-1967 Standard fol: Solvent ExtTaclion PlantsNFPA 37-19?0 Standarcl for the Installation and Use of Stationary Comì:ustion Engines and Gas TurbinesNFpÀ 40-1997 Standa¡d for the Storage and Handling of Cellulose Nitrate Motion Picì-u¡e I'ilm (1997 Edition).UFpA 40-1994 Standard for the Storage and Handling of CelLulose ¡litrate Motion Pícture FilrnNFPA 42-1997 code for the Storage of Pyroxylin Plastic (1997 Edition)'NFPA 51ts-1962 Standard for Fire Prevention in Use ôf Cutting and l{elding Proêesses¡ NFPA Standard 5LÐt 1962NF?A 5lB-:1.962 Stañdard for Fíre Pr:otectjon i.n Use of Cuttj.ñg and l^Ieldi-ng Pl:ocessesNFpÄ 518-L994 Standard fo:: Fire Prevention in Use of CutLing and i.Ielding Processes I I994NFPA 54-1969 Standa¡d foilLhe Tnstallation of Gas Appliances and Gas PípingNFPA 54-2002 National Fuel Gas code-NF?A 54-2002/ANSr 2223'I-2002'NFPA 54A-1969 Standard for the Install-ation of Gas Piping and Gas Equipment on Industl:ial Premises and Certain Other PremisesNFpÀ 5B-1969 Standard for the Storage and Handling of Liquefied letroleum Gases (ÀNSI 2106.f-1970)NFPA 58-2001 Standard for the Storage and Handling Líquefied Petroleum Gases.NFÞA 59-1968 Standard for the Stor:age and Handling of Liguefied PetToLeum Gases at Utility Gas FlantsNFPA 59-2004 "Utility LP-Gas Plant Code."NFPA 594-2001',Standard for the P¡oduction, Storage, and Handling of Líquefied Natural GaË [LNG)."NFPA 62-1967 Standard for the Prevenlion of Dust Explosions in the Production' Packaging' and HandLing of Pulverized Sugar and Cocc

NFPA 68-1954 National Fit:e Pïôtection Àssociation Explosion venting Guíde,NFPÀ 70-1990 National Electrical Code (also known as ANSI/NFPA 70-1990)NFPÀ 70-1993 National Electrical Code' 1993 EditionNFPÀ 70-1996 , National Elect¡ical Code (NEC) , 1996NFPA 70-2002 , National Electrical Code, 2002 edition {NEC 2002 Code).NFPÀ 70-2005 "National. Electrical cÕde"'NFPA 70-1999NFPÀ 70À Dlectrical Code for One a¡d Ttro Family DweIlings'NFPA 70E "standard for ELectrical- Safety in the Workplace," (2004)NFPA 72-1993 National Fire Àlarm Code, 1993NFPA 72-1996 National Fire Àlarm Code (1996 Edition).NFPA 72-2002 National FiIe Alarm codeNFPA 77-1993 Recommended Pradtíce on Static Electricity, 1993NFPA 78-1968 Lightning Protection CodeNFPÀ 80-1968 Standard for Firê Doors and l{indowsNFPA 80-1970 standard for the Installation of Fire Doors and l,Iindov¡sNFPA 864-L969 Standard for Oven and Furnaces Deaign, Location and EquipmentNFPA 908-1996 Warm Aj-r Heating and Ai¡ Conditj-oning Systems, NFPA 908¡ 1996 Edition.NFPÀ 91-1969 Standards for tslowe¡ and Exhaust SystemsNFPA 91-1961 American National Standard Installation of Blower: and Exhaust Systems for Dust, Stock¡ and VaPor Removal or ConveyingiNFPA 928-199s-Smoke Management Systems in Ma]ls, Àtria, and Large AxeasNFpÀ 96-1970 Standa¡d for the Installation of Equipment for the RemovaL of Smoke and Grease Laden Vapors f¡om Comme¡cia1 Cooking ac

NFPA 99-1996 standard for Health care Facilities' 1996NFPA 101-1970 Code for ],ife Safety From Fire in Buildings and StlucturesNFI'A 101-1994 , National File Protection Association's Life Safety Code (1994 editiÕn)NFPÀ 101-1997 , Life Safety Code (1997 Edition).NFPÃ 101-2000 , Life Safety Coder 2000 editionNFPA 101-2003 2003 edition of the NalionaL Fi.re Protection Àssociation I-ife Safety code, NFPÀ 101

NFPA 203M-1970 Manual on Roof Coverings,NFPÀ 221. standald for Fire waLls and Fire Barrier walls (1994 Edition).NFPA 231 Standard for- General Stórage [1998 EdLtion)'NFPA 23lc Standard for Rack Storage of l{aterial-s (1998 Edit-ion).NFPÄ 232 Standard for the ?rotection of Records (1995 Edition)'NFpÀ 232À Guide fo¡ FÍre P¡otection of Àrchives and Records Centels (1995 Editíon).

Append¡x A, Page 34

!norftFrÞoooo(oJ

NFPÄ 251-1969 SLandard MeLhods of Fire I'ests of Buildinq Construction ancl l"laterials¡IFPA 251-1990 Fire TeEtE of Buílding Construction and t'Iaterials, L990NFPA 255-1996 Standard Method of Test of Su¡face Burning Characteris¿ics of Buj.lding Materj.als NFFÀ, 255 , 7996ÀJPPÀ 261-.r-994 Test For Determining Resistance ôf Mock-up LJphofstèred Furniture Materiai Àssenìblies tÕ lgnition by Sr,ôldering clgar€NFPÀ 302-1968 Fire Pr:otection Standard for Motor-CÏaft (ÞÌeasure and Commercíal-)l.lFPÀ 302-1980 "Pleasure and Con'ünerciaJ. otor Craft, " Chapter 6 (1980 )NFPA 302--1989 Fire ProLecLion SLandard for Pleasure and Conunercial Crafi:. 1989IIFPA 302-:1994 Fire Protectj-on Standard for PleaEure and Connercial Mot.or Craft, 1994 EditionNFPÀ 302-1998 Fire Protectj.on standard for Pleasure, and commerciai Motorcraftl.lFPA 302-:1968 standard for Fire Protection for Motorcraft¡ NEPÀ No, 302-1968,NFPA 306-.1980 "Control of Gas Hazar:ds on Ve6sels" (1980)I'IFPA 306-1993 ControL of G¿rs Hazàrds on VesseIs, 1993 EditionNFPA 385-:1966 Reconunended Reguì.atory SLandard for Tank Vehicles for Flammable and Combusuible LiquidsI'IFPA 496-:t967 Standard for Purged Enclosures fo¡ Electricai Equipnent in Hazardous LocationsI.IFPA 496-:l.993 Standard for Purged and ?ressurized Enclosure6 for Electrical- Equipment, 1993NFPA 505-1969 Standard for Type Designations, ÀÌeas of Use, Maintenence, and Operation of Powered Industrial TrucksNFPA 566-1965 Standar:d for the Tnstallatíon of Blrlk Oxygen Systems at Consumer SítesNFPA 566-1965 Standard for Bufk Oxygen Systems at Consumel: Sites,NFPÀ 656-:1959 (Slandard for Dust Hazards in spì-ce Grrnding pl-ants)NFPA 70I-1996-Fire TeÊtÊ For Flane-ReEiElant Textiles and FilmsNFPA 750-2003-standard on 9tater Mist Fj-re Protection Systems, 2003 edj-tionNFPA 908-1996 vlarm Àir Eeating and Air Conditioning fìystems, NFPÀ 908, I996 EditiÒn,NFPÀ 1403--2002 Standard on Live Fire T::aining EvolutronsNFPÀ 1963--1989 Fire Hose ConnectionsNFPÀ 1963-1993 Fire Hose Connections, 1993 EditìonNFPÀ 1971-1975 Prolective Clothing for SlrucLural Fire Fightingl.lFPÀ 1971'-2000 Standard on Prolective EnseTnble for Structuraf Fire FightingNFPA 1971--1975 "Pl:otective Clothing for Structurai i¡ire Fighting,"NF?A 1971-2000 Standard on PTotectíve Ensemble for St-ruclural Fir:e FightingNFPÄ 1976-2000 Standard on Protective Ensemble for Proximity Fi::e FightingNFPA 1981.-2002 Standard on Open-Circuit Self-Contained Breathing Apparahus fo¡ Fire and Emergency Se.rvj-cesl.lFPA 1982--1998 Slandard on Personal Àlert Safety SyEt-ems (PÀ5S)NFPA 1983-2001 Standard on Fire Service Life Safety Rope and System components NFPÀ 10-2002 Standarcl for Portabl-e fire Extinguishe¡NtsPA 2001--2000-Standard on clean Agent I'ire Extinguishing systems, 2000 editionNFPA 2001-2004 Standard on Cl-ean Agent I'íre Extinguishing SystemsNFPÀ 5000-2003 Euilcling construction ancl Såfety code,NFPI National- Food Plant InsÈitute/ Definition and Tesl- procedures for Arrurnonium Nitrate FerLilize¡ (Nov. 1964)NWI¡]DA f.S.4-81 water Repelient PreEervative Non-Pre6sure Treatment for ¡,tiliwork.NWWÐÀ I.S,4-81 water RepeL:ent Preservative Non-?ressure Treatment for Mil-l-work.oCM.F International- Safety Gnide fo¡ oil. Tankers and Terminals/ Sections 9.1, 9.2t 9.3 and 9,5, Fourth Ed., 1995OCIMF OiI Cornpanies Inter¡¿ìtional- Marine Forum (OCTMF) 15th Floor, 96 Victoria Streetr London SI{18 5JtI Engiand., Ship to Ship TransOCIM¡'OiI Companies InternåtionåI Marine Fo.rum (OCIMF)/ InternationaL Safety Guide for OiI Tankers and Terminafs, Sectión 6.10/ ForÞÞI TR-3/:¿004 (2004¡ "Pol-icies and Procedures for Developing Hydrostatic Design Basis (EDB), PreEsure Design Basis (PÞB), StrengthRTCM Paper f2-78lDO-100 Radio lechnicai commiÊBion for MariÈime Servi.cee, 655 Fifteenth Street. NW., Suite 300r Washington, Dc 200(RgcM Pape:r 191-93/Sc112-X, RTclt RecÕilùnended Standards for Maritine Radar Equipment Install-ed ôn Ships of 300 Tons Gross Tonnage ancRTCM flaper I94-93lSCl04-STD, R?CM Recofiunended Standal:ds for Differential NÀVSTÀR GPS Servicer Vel:sion 2,I, L994SAE 581 Àuxiliary UÞper Beam Lamp6, Society of Àutomotive Engineers (SAn) J58f¡ July 2004, incorporation by reference approved forSAE 755 (1961) SAE Recommended Practice: Crane l,oading Stability Test CodeSAE ÀRP 8664, entitled "Standard Values at Atmospheric Àbsorption aE a Fì.hction of Temperature and Huinidity for Use in EvaLuatl-ng 3

SAE J100:revised June 1995r "C-ass'A'Vehicle GJ.azing Shade Bands" (SÀ-E Jl00, rev. June 95)SAE J168-:1970 ("Protective enciosures-test procedures and perfornance requirenents"),SAE Jl85,-Iune 1988, Recommended Practice for Access Systeins for off-Road MachinesSÀE J211 "Instrumentation for Impact Testsr" Parts I and 2, dated March 1995.SAE J211 :lnstrumentation fo¡ Impact Test, June 1988, is avai]-able from the Society of Àutomotive Engineers, Inc,, 400 Co¡monwealthSÀE J211 OCT 1988. "Instrum.entation for Impact Tests¡" Class 1000, is available froni The Society of -è,utomotive Engineers/ Inc., 40(

Append¡x A, Page 35

1lnc)Þn'l77

Ic)oc)c)(l¡l\)

sÄË J211/1 rev. Ma¡ 95, "Instrunentàtion for ImpacL Test-Fart 1-Ëlect¡onic Instrumentation,"SAE J21I/2 Rev. Mar 95 "Instrumentation for Impact TeEtE-Parl 2-Photographic In6lrumentation"SAE J231 Januaty i.981, "Minirnum Performance Crlteria for Falting Object Protective Struclures (FOPS)"SAE J378 Mårine Engine Wiring-l984SAE J386 June 1985, "Operatol: Restraint Systems for Off-Road [{ork ¡'lachines"SÄE J397 April 1988, "Deflect!.on timiting Volume-RoPS/FOPS Laboratory Evalualion"SAE J533b-1972 Fla¡es For Tubing, SÀE-JS33b-1972SAE J55? High tensíon Ignition CabIe-1968SAE J581 Auxiliary Upper Beam Lanps, Society of Automotive Engineers (SAE) J581, July 2004, incorporation by reference approved forSAE J5B3 Eïont Fôg Lamp, SÀ¡ J583, August 2004, incor:poratíôn by reference approved for 5393,24(b).SAE J5B5 Môt:ch 2000, TaiJ. Lamps (Rear Positi.on Lamps) fo:: Use on Motor Vehj.cl.es T.,ess Than 2012 min jn Overall Width, SÀ8,f585/ Mar

SAE J586 Stop Lamps for Use on l4otor Vehicles Less Than 2032 mm in OveralL l^Iidth, SÄE J586, March 2000, incorporation by xefer:enceSAE J5BB Turn Signal Lamps for Use on Motor VehicLes Less Than 2032 nun in Overall Width, SAE J588' March 2000'SAE J592 Sídemarker Lamps for Use on Road Vehicles Le6s Than 2032 mm in Overali Width' SAE J592, AuguËt 2000' inco.r:poration by refeSAE J594 Reflex Reflectors. SAE J594, December 2003, incorpolation by reference approved for S393.26(cI'SAE J595 Directional Flashing Optical Warning Devices for Àuthorized Emergency, Maintenance, and Service Vehicl"es, SÀ-8,1595, JanualSAE J673 revised April 1993, ,,Àutomotive Safety Glasses" (SAE J673r l:ev. April 93)SAE J765 Crane Loacl-Stability Eest Code, Society of Àutomotive Engineers (SÀE) J765SAE JB26 ,,DeviceÊ for Use in Defining and Measu¡j.ng Vehicle Seating ÀccoûL'nodation"'SAE J826 (rev. JUI 95)SAE JB45 optical Rarning Devices for Authorized Emergency, Maintenance, and Set:vice Vehicl-es' SÀE J845' May 1997, incorporation bySAE J1040 April 198B, ,,Performance Cr-iteria for'RoLlover Protective Structures (ROPS) fol Construction' Earthmoving' Forestry, andsAE J1127 Battery Cable-1980SAE J1128 Low Tension Primary Cable-l975SAE J1292 Automobiie, T::uck, Truck-Tractor, Trailer, and Motor Coach l,liring. SÀE J1292t October l9Sf incorporated by reference ap¡SAE J1318 Gaseous Discharge Warníng Lamp for Authorized Emergency, Maintenance, and Service Vehicles, SÄE J1318, May 1998, incorporSAE J1475-1984-Hydraulic llose Fitting for Marine ApplicationsSAE J1527DEc85 Marine Fuel Hoses-l'985SAE J1731 7994-12 "Sign convention for veh:-cl-e cr:ash Testing"SAE J1733 Information Report. titled "sign Convention for Vehicle Crash Testiñg," dated Decenber 1994.SAE J1817 Long Stroke Àir Brake Àctìrator Ma¡king, SÀE Jl817, July 2001, incorporation by reference approved for 5393.47|e\'SÀE J192g-Devices P¡oviding Backfire Fla¡ne Control for Gasoline Engines in Marine ApplicatJ.ons, ÀugusL 1989

sAE J1942-198g-HoEe and Hose Aseenilllíes for Marine ApplicationssAE J1942-1992 Hose and Hose Asse¡nblies for Marine Applications' 1992SAE J2040 Mar:ch 2002/ Tail Lamps (Rear Posilion LanLps) for Use on Vehicles 2032 ITìm or More in Overall Width, SÀ-E J2040/ ¡,141:ch 20(

SAE J2261 Januaïy 2002. Stop Lanps and Front- and Rear-Turn Signai Lamps for Use on Motor Vehíc-les 2032 ftrm or mo.re in Overall I^Iídt

SÈE JZ26L Stop Lamps and Front- and Rear-Turn SignåI Lamps for Use Õn Motol Vehicles 2032 m or more in OveraLl l'Iidth, SÀE J2261r iSAE Z26.l-fgg6 American National Standa¡d for Safety GiazJ-ng Materials for Glazing Motor Vehicl-es and Motor Vehicle Equipment Oper¿

SBCC Standard Plumbing Code, 1991 Edítion,SBCC Standard Building CÕde 1991 Edition, including 1992/L993 revisions Southern Building Code CongressStsCC Standard Gas Code, 1991 EditionSBCC standard Mechanical Code, 1991 Editíon, including 1992 revisions, andSCTE 28 2003 (formerLy DvS 295): "Host-POD Interfaêe Standald,' 2oo3

SCTE 40 2003 (formerly DVS 313): "DigitaL Cable Netr,Jork Inter:face Standa¡d," 2Q03

SCTE 41 2003 (formerty DvS 301): "POD Copy ProtectÍon System'' 2003SEI/ASCE 7-02 ,,Minimum Design Loads for Buildings and other Structures," (2002 edition) '6EI/.\SCE Specification for the Design of Cold-Fôrïned Stainless Steel Structurai Members-SEl/ÀSCE B-O2t 2002'Southern pine Inspection Bureau, Special Product Ru]-es for Structural. Industr.t-al' and Raiiroad-Freight Car Lumber, October 15. 19S

Southern pine Inspection Bureau, Standa¡d Grading RuLes for Southern Pine Lumbe¡r October 15' 1991rStandard Specificalion for Hubl-ess Cast Iron Soil Pipe and Fittings for Sanilary and Sto::m Drain, f{aste' and VenL Þiping APplicaticTpI DeEign Specifications for Metai Plate and 9lood Connected TruBses-TPf-85.TTP 1536.A-1975,. Plumbing Fixture Setting Compound-UL 19-1978 "v,Ioven Jacketed, Rubber Lined Fire Hose"llL L9-1992 Lined Fire Hose and llose Àssembl-iesUL 30 Standard for Metal Safety Cans, 7th Ed., March 11r L985, revised March 12, 1985 and March 3, L987'UL 3B Standard for Manually Àctuated Signal-ing Boxes for Use (\tith Fire-Pì:otective Signaling Systems, 1994

Appendix A, Page 3ó

TÃoÞmnÞ

Ioooo(oG)

UL 44 Sta¡rdard fo¡ Rubber-InsuLated Wire and Cable, 1991 (including revisions Lhrough February, 1996)UL 50 Standard fo.r Enclosures for Electrícal Equípment, 1995VL 57-I976 Electric Lighting FixturesUL 58-61 fiteeL Underground Tanks for Flammabl-e and combustible Liquids¿ 5th Ed,UI,62 Standard for Flexible Cord and Fíxtirre \{ire, 1991 (including revisions Èhrough February, 1996)UL 80 Standard for Steel Inside Tanks for Oil--Burne¡ Fuel, Seirlember 1963,UL 83 Sùa¡rdard for Thennoplastic-Insulated Wi¡es and Cables, 799I (including ¡evisions through March, 1996)UL 94 Test6 for Flammability of Pl"a6tic Materials for Par:ts in Devices and Appiiances, fourth edition, dated June 18, 199:t,UL 103 Factory-Built Chimneys for Residential Type a¡rd Building Heating Àppliances, Ninth Edition-Ul 103/ 1995¡ with 1999 revisionsUL 103 Sixth Edition revised as of Septenber 3f 1986, standard fôr chimneys, È-actôry-built, Residentiai Type and tsuilding Heat:ng ÌUL, 109-l 997 v¡j.th 2001 lievisi.ons. Tube Filtings for Fl ammable ancl Cornbustí.bL,e Fluids, Ref rì.ge:rati.on Service, and Marine Use/ S j.xtb Ê

UL I27-L996 Factory-Built Pireplaces. Seventh Editio¡r-UT. 12'1-1996, rrith 1999 revisions.IJL 142-68 Steel.A.bove Ground Tanks fo¡ Flanunable and Combustible LiquidsUL 174-1996 Household Electríc Storage Tank Water Heaters, Tenth Edition-Ul 174-1996, k'ith 1997 revisions.UL 181-1996 Factory-Made Air Ducts and Connectors, Ninth Edition-Ul 181, 1996 with 1998 revisions.UL 1814-1994 Standard for Safety ciosure System8 fo¡ use with Rigid Àir Ðucts and Àir Connectors, UL 18LÀ, 1994¡ wj-th I99B revisio¡UL 217-1993-Single and Multiple Station Smoke DetectorsUL 268 St¿\ndard for Smoke Detectors for Fire Protective Signaling Systems, 1989 (incJ-uding::evisions through June 1994)IJL 295 St¿rndard for oiL Burne.rsf Seventh Edi.Eion, Aìrgust 22, I98D (Revisions through Àugust 1985)UL 307À-1995 with 1997 Revj.sions Liquid FueI-burning Healing Appl-iances for Manufactured Homes and Recreationai Vehicles,UL 3078-1995 GaB Burning ueating Appl-iances fot Manufacturecl Homes and Rec.reational Vehicles, Fourth Edition, with 1998 revisions-tUL 311-I994 Roof Jacks for Manufaclured Hómes and ReÕreational- Vehicles, Ej-ghth Edition-Ul 3IIt I994t with 1998 revisions.UL 343 St¿Lndard for Pumps for oil Burning Appliances, Sixth Aditicn, July 17. 1986UL 441-1996 cås Vents, Ninth Edition-Ul 441t 1996 with 1999 revisions,UL 486À-1992 I¡lire Connectors and So.ldering Lugs for Use wiLh Copper ConducLorsUL 489 St¿rndard for Molded-Case Circuit Breakers and Ci¡cuit-Breaker Enclosures, 1991 (including revisj-ons lhrough June, 1995)UL 489-1995 Môlded-Case Circuit Breàkers and Circuit-Bteaker Encl-csur-esUL 514À stândar:d for l,letal-Iic outlet Êôxês, 1991- (including revisi-ons thr-ough Àprì1, 1995)UL 514B Standard for Fitlings for: Conduil and Outlet Boxes, 1989 (incÌuding revisions through Àprii, 1995)UL 514C Standard for NonmetalLic Outl-et Boxes, Flush-Device Boxes, and Covers, 1988 (including revisions through Àpri1. 1995)UL 52L Slandard for Heat Detectors for Fire ProtecLive Signaling Systems, 1993 {including revisions through OcLober 1994)UL 569 Piç¡tai1s and Flexibl.e HoBe Conneclors for f,P-cas, Seventh Edition-Ul 559, 1995 r^'ith 2001 revisions.UL 569-1995 figtails and Flexible Hose Connectors fol'LP-cas, Seventh Edition-Ul, 569. 1995 with 2001 revisions.UL 569-1995 Pigtails and !-l.exible Hose ConnectÒrs for: LP GasUL 595-1991 Marine-Type Electric f,ighting FixturesUt 6lL central-Station Burglar-Alarm Sy6tems (Februar:y 22t 19961,UL 710-1990 as arnended through September 16. 1993-Exhaust Hoods FÐr Comnìercial Cooking EsuipmentUL 723-1993 aE arlended through April 20, 1994-Surface Burning Characteristics of BuiLd:-ng l.tateriafsuL 727-1994uI" 127-L994 "Standard for Safety oil-Fired Cent¡aI Furnaces," ItsR approved for S431.76.uf,737 Fireplace Stoves, Eight Edition, with 2000 revisions*U], 737, 1996.UL 737-L996 FirepJ-ace Stoves, Eight Edition, with 2000 revisions-Ul 737, 1996.UL 783-79 SLandard for Safety, El-ect¡ic Flashlights for Use in Hazardous Locations, Clåss 1, crouls C and D, 1979.IJL 827 Centraf-Station Alarm Services (April 23, 1999).UL 864 Standard for ControÌ Units for FiIe-PÏotective SiqnåIing Systems, 1991 (including revisions thrÕugh May 1994)UI, 913 (as revised AÞriI 8, l9;5).UL 913 Standard for IntrinÉically Safe Apparatus and Associated Àpparatus for Use in Ciass It TIt and IfI Divísion l¡ Hazarclous (ClUL 1042-1994 ¡ Stancìard for Efectric Baseboard Heating Equipment, 1994 (incl-ud:ng revj,sions thrôugh Novernber/ 1995)UL 1056-198g-Fire Te6t of UphoJ.stered FurnitureUL f058-1989 as amended through April 19, 1994-Halogenated Agent Extinguishing System UnitsuL I072 Standard for Mediunì-vol.tage Power cabLeE¡ L995 lincluding revisions through Januaryf 1996)UL 1076 lroprietary BurgÌar Àlarn Units and systeins (February 1, 1999).UL 1096 EfectTic Central Air Heating Equipment-UL 1096-Fourth EdiÈion-1986 with revisions July 16/ 1986, änd January 30¡ 1988.UL 1102-199z-Non j.ntegraL lfarine FueI lanksUL 1l04 Standard for Ma¡ine Na,.¡igation r,ights, 1981 (including revisions through May, 1988)

Appendix A, Page 37

-t¡7'c)Þnt7tÞ

I

c)c)ct-lc,(t¡T

UL 1110-1988 as ainended through }4ay 16, 1994-Marine Combustible Gas Indicato::sUL 1111-1988-Maríne Carburetor Flame ArrestersUL 1114 Marine (USCG Type .¡\) flexible Fuel Line Hose-1987UL 1123 "Matine Buoyant Devices"r Februal:y 17t 1995

UL 1121-1987-Standard for Malíne Buoyant Devices'UL 1128 Marine Blowers-l977uL 1180 "Fully Inflatabl-e Recreational Personal Ffotation Devices"' May 15, 1995

UL ll8s-Standard for portable I'lar:ine Fuel Tanks, Second Edition, March 13, L978, revised JuIy 6, 1984'UL 1191 "components for Personal Flotation Devices"' May 16' 1995

uL 1191 First Editiôn (standard for components for Personal Flotation Devices)f as revised March 29' 1977.

uL l 1.96 standarcì f or: Fl.oating i.Iater:l.ights, second Editi on Mar:ch 23 | 7987 .

UL 1203 Stanclard for Explosiån-proof åncl Dust-Ignition-Proof Eiectricai Eguipnent for Use in Hazardous (cJ.assified) l,ocationsr 1991

uL 1309 Standard for Marine shipboard cab1e, First edition, July 14, 1995

UL l3l3-standard for Nonrnetalliõ Safety Cans fo¡ Petroleum Products, lst Ed., March 15, 1982r revised January 3, 1984 and March 22l

UL l3L4-standard for Special-FropoFe containers, 1st Ed,. JuLy 7, 1983, r'evised February 7t 1984 and September 23' 1986,

UL,1426 Cables fôr Boats-lg87UT, l45J-19g8 as amended through June 7, 1994-ELectr:ic Boostet: and Commercial Storage Tanl( water HeatersU! 1482-1995 SoLicl-Fuel Type Room Heate¡:s, Fifth Edition-Ul L482t L995, with 2000 revisions'UL I517 "Hybrid Personal Flotation Devices"'UL I569 Standard for Metal-Clad CableÊ, 1995 (including revisions thr:ough Ap::ii, 1996)

UL 15?0 Standard for Fluorescent Lighting Pixtures, 1988 (including revisions thl'ough Àprii, L996)

UL 15?0-1995 Fluorescent Lighting FixturesUL 1571 Standard for Incandásceni Lighting fixtures, 1995 (incìuding revisions thl:ough ÀÞril' 1996)

UL Ls72 stancìard for High rntensity Discharge Lighting Fixtures/ 1995 (including revisions through May. 1996)

UL 1573 Standard for Stáge and Studio Lighting Utits, 1994 (including revisions through February' 1995)

UL 1574 Standard for Track Lighting SyEtems, 1995 (inciuding revísions through JuIy' 1995)

uL 15a1 Refer.ence standar-d foi nlectrical- ç^1i1'es, cables, and Fiexible cor-ds, 1991 (inciuding revisiÕns through Janua::y, 1996)

UL 181g-1995 Standard for Safety cl-osure Systems for use with Flexible Air Ducts and Aj-r connectorsf Filst Edition-Ul 181ts, 1995, !UL 1995 Heating and Cooling Equipment, Second Editíon, with 1999 l:evisions-Ul 1995/ 1995.

uL 20zl-Lgg7 Fixed and ¡.ocåtián-oedicated ELectric Room Heaters, Second Edition, r*ith 1998 revisions-ul 202L-L991.

uniform commercial code, Revised e¡ticle g, rnvestment securities (with conforming and l"liscellaneous Amendments to Àrt:cles r, 3' ¿-

United States ?harmacopeia (USP)/National Forrnulary (NF) de8cribed in USP 30/NF 25, May I,2007United States pharnracopial Convention, Inc.f United States PharmacoPeia, 23d Revision¡ January 1/ 1995

uspc.The united st"t.è pharrnacopoeia (lventÍeth Revisíon, officiaì from JuIy/ 1980) united states Fharmacopoeia convention' rnc./uspc Natíona.I Formulary (Fífteenth Edition, off-icial fl.on JuIy 1' 1980)"Íùest coast Lumber Inspãction Bureau, Standard No. 17, Grading RuLes for West Coast Lumbêr, September 1, 1991' a

wj-re Rope users Manuai, zoa Edition, I,¡ire Rope Technical Board November 1985, incorporation by refe¡ence approved for S393.104(e).VüAÀ S-100 Household Commericial and Portable Exchange [^tater Softeners-l985WOn S-ZOO Household and Commercial water Filters-L988 water Quality AssociationWeÀ 5-300 Point-of-Use, Low Pressure Reverse Osmosis nrinkinq Vlater Systems-l984w8À S-400 Point-of-Use Distill-ation Drínking I'Iater Systens-l986wsrDÀ-T1, 1998 Reco¡Tûnended stanclard specifiãation fôr- Synthetic hreb Tiedowns, f¡Ieb sling and Tiedôwn Àssociation' l'¡sTDÀ-T1' 1998, it

TnomEÞ

Ioooo(o(ì

Append¡x A, Page 38