标准号英文标题标准名称国际标准分类EN 欧洲标准

标准号英文标题标准名称国际标准分类

BS EN 806-1:2000Specification for installations inside

buildings conveying water for humanconsumption -Part 1: General

人类饮用水用建筑物内部输水装置规

范—第1部分：总则 ICS 91.140.60

BS EN 806-2:2005Specification for installations inside

buildings conveying water for humanconsumption —Part 2: Design


范—第2部分：设计

ICS 91.140.60

BS EN 10020: 2000Definition and classification of grades of

steel钢的等级定义和分类

ICS 01.040.77 ；

77.080.20

BS EN 10048:1997Hot rolled narrow steel strip. Tolerances on

dimensions and shape2 - 热轧窄钢带

BS EN 10056-1:2017Structural steel equal and unequal leg angles.

Dimensions2 - 等边及不等边角钢

BS EN 10067:1997Hot rolled bulb flats. Dimensions and

tolerances on shape, dimensions and mass2 - 热轧球扁钢

BS EN 10080: 2005Steel for the reinforcement of concrete -

Weldable reinforcing steel - General混凝土增强用钢—可焊接钢筋—总则

ICS 77.140.15;

77.140.60; 77.140.65

BS EN 10083-1:2006Steels for quenching and tempering. General

technical delivery conditions2 - 调质钢

BS EN 10084:2008Case hardening steels. Technical delivery

conditions2 - 表面硬化刚

BS EN 10085:2001 Nitriding steel. Technical delivery conditions 2 - 氮化钢

BS EN 10087:1999Free cutting steels. Technical delivery

conditions for semi-finished products, hotrolled bars and rods

2 - 易切削钢

BS EN 10095:1999 Heat resisting steels and nickel alloys 2 - 耐热钢及合金

BS EN 1011-1:2009Welding. Recommendations for welding of

metallic materials. General guidance for arc2 - 金属焊料

EN 欧洲标准

国际工程数据中心

EN 欧洲标准

BS EN 10143:2006Continuously hot-dip coated steel sheet and

strip. Tolerances on dimensions and shape2 - 连续热镀钢片和钢条

BS EN 10210-1:2006Hot finished structural hollow sections of

non-alloy and fine grain steels. Technicaldelivery requirements

2 - 非合金细晶粒结构钢热成型空心

型材

BS EN 10210-2:2006

Hot finished structural hollow sections of

non-alloy and fine grain structural steels.Tolerances, dimensions and sectionalproperties

2 - 非合金细晶粒结构钢热成型空心

型材

BS EN 10216-1:2013

Seamless steel tubes for pressure purposes.

Technical delivery conditions. Non-alloy steeltubes with specified room temperatureproperties

2 - 承压无缝钢管

BS EN 10216-2:2013

Seamless steel tubes for pressure purposes.

Technical delivery conditions. Non-alloy andalloy steel tubes with specified elevatedtemperature properties


BS EN 10216-5:2013Seamless steel tubes for pressure purposes.

Technical delivery conditions. Stainless steeltubes


BS EN 10217-1:2002

Welded steel tubes for pressure purposes.

Technical delivery conditions. Non-alloy steeltubes with specified room temperatureproperties

2 - 承压焊接钢管

BS EN 10217-

2:2002+A1:2005


Technical delivery conditions. Electric weldednon-alloy and alloy steel tubes with specifiedelevated temperature properties



EN 欧洲标准

BS EN 10217-3:2002Welded steel tubes for pressure purposes.

Technical delivery conditions. Alloy finegrain steel tubes


BS EN 10217-5:2002


Technical delivery conditions. Submerged arcwelded non-alloy and alloy steel tubes withspecified elevated temperature properties


BS EN 10220:2002Seamless and welded steel tubes. Dimensions

and masses per unit length2 - 无缝焊接钢管

BS EN 10224:2002Non-alloy steel tubes and fittings for the

conveyance of water and other aqueous liquids.Technical delivery conditions

2 - 水和液体输送用金属管道及管配件

BS EN 10250-4:2000Open steel die forgings for general

engineering purposes. Stainless steels2 - 工程通用开式模锻件

BS EN 10253-1:1999Butt-welding pipe fittings. Wrought carbon

steel for general use and without specificinspection requirements

2 - 管配件

BS EN 10255:2004Non-alloy steel tubes suitable for welding and

threading. Technical delivery conditions2 - 焊接及螺纹连接用非合金钢管

BS EN 10296-1:2003

Welded circular steel tubes for mechanical and

general engineering purposes. Technicaldelivery conditions. Non-alloy and alloy steeltubes

2 - 机械和一般工程用焊接圆钢管

BS EN 10297-1:2003

Seamless circular steel tubes for mechanical

and general engineering purposes. Technicaldelivery conditions. Non-alloy and alloy steeltubes

2 - 机械和一般工程用焊接圆钢管

BS EN 10300:2005Steel tubes and fittings for onshore and

offshore pipelines. Bitumen hot appliedmaterials for external coating

2 - 岸上及近海管道用钢管和管配件

BS EN 10305-1:2016Steel tubes for precision applications.

Technical delivery conditions. Seamless colddrawn tubes

2 - 精密仪器用钢管


EN 欧洲标准


Technical delivery conditions. Welded colddrawn tubes



Technical delivery conditions. Welded coldsized tubes


BS EN 10305-4:2016

Steel tubes for precision applications.

Technical delivery conditions. Seamless colddrawn tubes for hydraulic and pneumatic powersystems



Technical delivery. Welded cold sized squareand rectangular tubes



Technical delivery conditions. Welded colddrawn tubes for hydraulic and pneumatic power


BS EN 10311:2005Joints for the connection of steel tubes and

fittings for the conveyance of water and otheraqueous liquids

2 - 水和液体输送用金属管道及管配件

BS EN 10312:2002Welded stainless steel tubes for the

conveyance of aqueous liquids inclu ding waterfor human consumption. Technical delivery

2 - 液体输送用焊接不锈钢管

BS EN 1057:2006+A1:2010Copper and copper alloys. Seamless, round

copper tubes for water and gas in sanitary andheating applications

2 - 铜及铜合金

BS EN 1090-1

Execution of steel structures and aluminium

structures –Part 1: Requirements for conformity assessmentof structuralcomponents

钢—表观晶粒度的显微金相测定法 ICS 91.080.10

BS EN 1090-2:2008+A1:2011Execution of steel structures and aluminium

structures. Technical requirements for steelstructures

2 - 钢结构和铝结构实施


EN 欧洲标准

BS EN 1092-1:2007+A1:2013Flanges and their joints. Circular flanges for

pipes, valves, fittings and accessories, PNdesignated. Steel flanges

2 - 法兰

BS EN 1092-2:1997Flanges and their joints. Circular flanges for

pipes, valves, fittings and accessories, PNdesignated. Cast iron flanges

2 - 法兰


pipes, valves, fittings and accessories, PNdesignated. Copper alloy flanges

2 - 法兰

BS EN 1097-3:1998

Tests for mechanical and

physical properties ofaggregates ÐPart 3: Determination of loose bulkdensity and voids

骨料的机械与物理性能试验—

第3部分：松散密度和孔隙率测定 ICS 91.100.20

BS EN 12255-1:2002Wastewater treatment

plants —Part 1: General construction principles

废水处理装置—第1部分：通用建造原

则ICS13.030.40; 13.060


plants ÐPart 10: Safety principles

废水处理装置—第10部分：安全原则 ICS 13.060.30


plants —Part 11: General data required

废水处理装置—第11部分：需要的通

用数据ICS 13.060.30


plants —Part 12: Control and automation

废水处理装置—

第12部分：控制和自动化ICS 13.060.30

BS EN 12255-13:2002

Wastewater treatment

plants —Part 13: Chemical treatment —Treatment of wastewater byprecipitation/flocculation


第13部分：化学处理—废水沉淀/絮凝处理

ICS 13.060.30


plants —Part 14: Disinfection

废水处理装置—第14部分：消毒 ICS 13.060.30


EN 欧洲标准


plants —Part 3: Preliminary treatment

废水处理装置—第3部分：预处理 ICS 13.060.30


plants —Part 4: Primary settlement

废水处理装置—第4部分：初步沉降 ICS 13.060.30


plants —Part 5: Lagooning processes

废水处理装置—第5部分：污泥池处理

工艺ICS 13.060.30


plants —Part 6: Activated sludge process

废水处理装置—第6部分：活性污泥工

艺ICS 13.060.30


plants —Part 7: Biological fixed-film reactors

废水处理装置—第7部分：生物固定膜

反应器ICS 13.060.30


plants —Part 8: Sludge treatment and storage

废水处理装置—第8部分：污泥处理和

储存ICS 13.060.30


plants —Part 9: Odour control and ventilation


第9部分：气味控制和通风ICS 13.060.30

BS EN 12259-1:1999

Fixed firefighting

systems — Componentsfor sprinkler and waterspray systems —Part 1: Sprinklers

固定消防系统—自动喷水灭火系统和

水雾系统用部件—第1部分：洒水喷头ICS 13.220.20

BS EN 12259-2:1999

Fixed firefighting

systems — Componentsfor sprinkler and waterspray systems —Part 2: Wet alarm valve assemblies


水雾系统用部件—第2部分：湿式报警阀组件

ICS 13.220.20


EN 欧洲标准

BS EN 12259-3:2000

Fixed firefighting

systems — Componentsfor sprinkler and waterspray systems —Part 3: Dry alarm valve assemblies


水雾系统用部件—第3部分：干式报警阀组件

ICS 13.220.20

BS EN 12259-4:2000

Fixed firefighting

systems — Componentsfor sprinkler and waterspray systems —Part 4: Water motor alarms


水雾系统用部件—第4部分：水力警铃ICS 13.220.20

BS EN 12259-5:2002Fixed firefighting

systems — Componentsfor sprinkler and waterspray systems —Part 5:Water flow detectors


水雾系统用部件—第5部分：水流探测器

ICS 13.220.20

BS EN 12350-6:2009 Testing fresh concrete. Density 1 - 新拌混凝土测试

BS EN 12390-1:2012Testing hardened concrete. Shape, dimensions

and other requirements for specimens and1 - 硬化混凝土测试

BS EN 12504-1:2009Testing concrete in

structuresPart 1: Cored specimens — Taking,examining and testing in compression

结构上使用的混凝土试验

第1 部分：芯样 — 取样，检查和压缩试验；

ICS 91.100.30

BS EN 12504-2:2012Testing concrete in structures

Part 2: Non-destructive testing —Determination of rebound number

结构用混凝土试验

第2部分：无损检验——回弹数的测定 ICS 91.100.30

BS EN 12845:2004

+A2：2009

Fixed firefighting

systems — Automaticsprinkler systems —Design, installation andmaintenance

固定消防系统——

自动喷水灭火系统——设计、安装及维护

ICS 13.220.20

BS EN 13251:2014+A1:2015Geotextiles and geotextile-related products.

Characteristics required for use inearthworks, foundations and retaining

土工织物和土工织物相关产品。土方

工程，基础和挡土构筑物需使用的特性。

ICS 93.020


EN 欧洲标准

BS EN 1329-1:2014

Plastics piping systems for soil and waste

discharge (low and high temperature) withinthe building structure. Unplasticizedpoly(vinyl chloride) (PVC-U). Specificationsfor pipes, fittings and the system

3 - 建筑机构内塑料排污管

BS EN 13369: 2013 Common rules for precast concrete products 预制混凝土产品的通用规则 ICS 91.100.30

BS EN 13791: 2007Assessment of in-situ compressive strength in

structures and precast concrete components

建筑物和预制混凝土构件的现场耐压

强度评定ICS 91.080.40

BS EN 14188-1:2004Joint fillers and

sealants —Part 1: Specifications for hot appliedsealants

填缝料和密封胶

第1部分：热敷式密封胶规范ICS 93.080.20

BS EN 14188-4:2004

Joint fillers and

sealantsPart 4: Specifications for primers to beused with joint sealants

填缝料和密封胶

第4部分：与接合密封胶使用的处理剂规格

ICS 93.080.20

BS EN 14199：2015Execution of special geotechnical works.

Micropiles.特殊岩土工程施工-微型桩 ICS 93.020

BS EN 14399-1:2015High-strength structural bolting assemblies

for preloading. General requirements

2 - 预加荷载高强度结构用螺栓连接


for preloading. System HRC. Bolt and nutassemblies with calibrated preload



for preloading. Suitability for preloading



for preloading. System HR. Hexagon bolt andnut assemblies



for preloading. System HV. Hexagon bolt andnut assemblies



for preloading. Plain washers



for preloading. Plain chamfered washers



EN 欧洲标准


for preloading. System HR. Countersunk headbolt and nut assemblies



for preloading. System HV. Hexagon fit boltand nut assemblies


BS EN 14490:2010Execution of special geotechnical works —Soil

nailing特殊岩土工程的实施——土钉 ICS 93.020

BS EN 14503:2003Inland navigation vessels. Harbours for inland

navigation.内河航行船舶。内河航行港口。 ICS 47.020.99

BS EN 14504:2016

Inland navigation vessels. Floating landing

stages and floating equipment on inlandwaters. Requirements, tests

内河航行船舶—内河水域浮动码

头与浮动设备—要求、试验ICS 47.020.99

BS EN 14647:2005Calcium aluminate cement. Composition,

specifications and conformity criteria1 - 铝酸钙水泥

BS EN 1537：2013Execution of special geotechnical works.

Ground anchors.特殊土工工程实施。地锚 ICS 93.020

BS EN 1562:2012 Founding. Malleable cast irons 2 - 铸造可锻铸铁

BS EN 15869-1:2010Inland navigation vessels. Electrical shore

connection, three phase current 400 V, up to63 A, 50 Hz. General requirements

内河航行船舶。三相电流400V、63A、

50Hz的电气岸电连接器。总则。ICS 47.020.99

BS EN 15869-2:2010Inland navigation vessels. Electrical shore

connection, three phase current 400 V, up to63 A, 50 Hz. Onshore unit, safety requirements

内河航行船舶。三相电流400V、63A、

50Hz的电气岸电连接器。在岸设备，安全要求。

ICS 47.020.99

BS EN 16767:2016Industrial valves. Steel and cast iron check

valves2 - 工业级钢制和铸铁止回阀


pipes, valves, fittings and accessories,class-designated. Steel flanges, NPS 1/2 to 24

2 - 法兰


pipes, valves, fittings and accessories, classdesignated. Copper alloy flanges

2 - 法兰

BS EN 1947:2014Fire-fighting hoses. Semi-rigid delivery hoses

and hose assemblies for pumps and vehicles4 - 安全


EN 欧洲标准

BS EN 196-2:2013Method of testing cement

Part 2: Chemical analysis of cement

水泥实验法

第2部分：水泥的化学分析 ICS 91.100.10

BS EN 1992-1-

1:2004+A1:2014

Eurocode 2: Design of

concrete structures —Part 1-1: General rules and rules forbuildings

欧洲规范2：混凝土结构设计

第1-1部分：建筑物总则与细则ICS 91.010.30; 91.080.40

BS EN 1997-2:2007+2010修

订

Eurocode 7 —

Geotechnical design —Part 2: Ground investigation andtesting

欧洲规范7—岩土工程设计—

第2部分：场地勘察和试验 ICS 91.010.30; 93.020

BS EN 206:2013+A1:2016Concrete. Specification, performance,

production and conformity

1 - 混凝土规格、性能、生产及一致性

BS EN 450-1:2012Fly ash for concrete. Definition,

specifications and conformity criteria1 - 混凝土粉煤灰

BS EN 480-1:2014Admixtures for concrete, mortar and grout.

Test methods. Reference concrete and referencemortar for testing

1 - 混凝土、灰浆及浆液外加剂试验方法


Test methods. Determination of water solublechloride content



Test methods. Determination of air voidcharacteristics in hardened concrete



Test methods. Determination of the alkalicontent of admixtures



Test methods. Determination of setting time



Test methods. Determination of bleeding ofconcrete



Test methods. Determination of capillaryabsorption



EN 欧洲标准


Test methods. Infrared analysis



Test methods. Determination of theconventional dry material content


BS EN 523: 2003Steel strip sheaths for prestressing tendons -

Terminology, requirements, quality control

预应力钢筋用钢带材制钢筋鞘管——

术语、要求和质量控制

ICS 01.040.77;

77.140.75; 91.080.40

BS EN 545:2010Ductile iron pipes, fittings, accessories and

their joints for water pipelines. Requirementsand test methods

2 - 韧性铁（球墨铸铁）管配件

BS EN 573-3:2013Aluminium and aluminium alloys. Chemical

composition and form of wrought products.Chemical composition and form of products

2 - 铝及铝合金

BS EN 60034-3:2008Rotating electrical machines. Specific

requirements for synchronous generators drivenby steam turbines or combustion gas turbines

3 - 旋转电机

BS EN 60061-

1:1993+A53:2015

Lamp caps and holders together with gauges for

the control of interchangeability and safety.Lamp caps

4 - 安全

BS EN 60335-1:2012Household and similar electrical appliances -

Safety -Part 1: General requirements

家用和类似用途电器—安全

第1部分：通用要求 ICS 97.030

BS EN 60825-1:2014Safety of laser products. Equipment

classification and requirements4 - 安全

BS EN 62471:2008Photobiological safety of lamps and lamp

systems4 - 安全

BS EN 694:2014Fire-fighting hoses. Semi-rigid hoses for

fixed systems4 - 安全

BS EN 754-1:2016Aluminium and aluminium alloys. Cold drawn

rod/bar and tube. Technical conditions forinspection and delivery

2 - 铝及铝合金


rod/bar and tube. Mechanical properties2 - 铝及铝合金


rod/bar and tube. Seamless tubes, toleranceson dimensions and form

2 - 铝及铝合金


EN 欧洲标准

BS EN 805:2000Water supply -Requirements for systems and

components outside buildings

供水系统—建筑物外部系统和构件要

求

ICS 23.040..01；

91.140.60

BS EN 806-3:2006

Specifications for

installations insidebuildings conveyingwater for humanconsumption —Part 3: Pipe sizing —Simplified method


范—第3部分：管道尺寸确定—简化法

ICS 91.140.60

BS EN 806-4:2010Specifications for installations inside

buildings conveying waterfor human consumption - Part 4: Installation


范—第4部分：安装

ICS 91.140.60

BS EN 81-70：2003

Safety rules for the construction and

installations of liftsParticular applications for passenger and goodpassengers lifts -Part 70: Accessibility to lifts for personsincluding persons withdisability

电梯建造和安装的安全规则—

客用电梯和货客用电梯的特殊应用—第70部分—包括残障人员使用的电梯的可接近性

ICS 91.140.90

BS EN 932-1:1997Tests for general properties of aggregates.

Methods for sampling1 - 骨料测试

BS EN 934-2:2009+A1:2012Admixtures for concrete, mortar and grout.

Concrete admixtures. Definitions,requirements, conformity, marking and

1- 混凝土外加剂

BS EN 969:2009Ductile iron pipes, fittings, accessories and

their joints for gas pipelines. Requirementsand test methods

2 - 韧性铁（球墨铸铁）管配件

BS EN ISO

14688-1:2002+A1:2013

Geotechnical

investigation andtesting —Identification andclassification of soil —Part 1: Identification and description

土工勘查与试验—土的标识和分类—

第1部分：标识和说明ICS 93.020


EN 欧洲标准

BS EN ISO

14688-2:2004+A1:2013

Geotechnical

investigation andtesting —Identification andclassification of soil —Part 2: Principles for a classification

土工勘查与试验—土的标识和分类—

第2部分：分类原则 ICS 93.020

BS EN ISO

22476-3:2005+A1:2011

Geotechnical

investigation andtesting —Field testing —Part 3: Standard penetration test

土工勘查与试验—

现场试验—第3部分：标准贯入试验

ICS 93.020

BS EN ISO 11058:2010

Geotextiles and

geotextile-relatedproducts —Determination ofwater permeabilitycharacteristics normalto the plane, withoutload

土工织物和土工织物相关产品—垂直

于平面且无载荷透水性的测定ICS 59.080.70

BS EN ISO 13174:2012 Cathodic protection of harbour installations 海港装置的阴极保护 ICS 47.020.99

BS EN ISO 14171:2016

Welding consumables. Solid wire electrodes,

tubular cored electrodes and electrode/fluxcombinations for submerged arc welding of nonalloy and fine grain steels. Classification

2 - 焊接耗材

BS EN ISO 14174:2012Welding consumables. Fluxes for submerged arc

welding and electroslag welding.2 - 焊接耗材

BS EN ISO 1452-1:2009

Plastics piping systems for water supply and

for buried and above-ground drainage andsewerage under pressure. Unplasticizedpoly(vinyl chloride) (PVC U). General

3 - 供水及地上埋管式压力排水用塑料管道（PVC-U）

BS EN ISO 1452-2:2009


for buried and above-ground drainage andsewerage under pressure. Unplasticizedpoly(vinyl chloride) (PVC U). Pipes



EN 欧洲标准

BS EN ISO 1452-5:2009


for buried and above-ground drainage andsewerage under pressure. Unplasticizedpoly(vinyl chloride) (PVC U). Fitness forpurpose of the system


BS EN ISO 14732:2013

Welding personnel. Qualification testing of

welding operators and weld setters formechanized and automatic welding of metallicmaterials

2 - 焊接人员

BS EN ISO 15614-1:2017

Specification and qualification of welding

procedures for metallic materials. Weldingprocedure test. Arc and gas welding of steelsand arc welding of nickel and nickel alloys

2 - 焊接工艺

BS EN ISO 15614-2:2005


procedures for metallic materials. Weldingprocedure test. Arc welding of aluminium andits alloys

2 - 焊接工艺

BS EN ISO 15614-8:2016


procedures for metallic materials. Weldingprocedure test. Welding of tubes to tube-platejoints

2 - 焊接工艺

BS EN ISO 17636-1:2013Non-destructive testing of welds. Radiographic

testing. X- and gamma-ray techniques with film2 - 焊接检测

BS EN ISO 17636-2:2013Non-destructive testing of welds. Radiographic

testing. X- and gamma-ray techniques withdigital detectors

2 - 焊接检测

BS EN ISO 17892-1:2014

Geotechnical investigation and

testing — Laboratory testing ofsoilPart 1: Determination of water content

岩土工程勘察和试验—土壤的实验室

试验第1部分：水含量的测定

ICS 13.080.20; 93.020

BS EN ISO 18286:2010Hot-rolled stainless steel plates. Tolerances

on dimensions and shape2 - 热轧不锈钢板

BS EN ISO 2081:2008Metallic and other inorganic coatings.

Electroplated coatings of zinc withsupplementary treatments on iron or steel

2 - 金属及其他无机涂料


EN 欧洲标准

BS EN ISO 2082:2017Metallic coatings. Electroplated coatings of

cadmium with supplementary treatments on ironor steel

2 - 金属涂料

BS EN ISO 22476-12 2009Geotechnical investigation and testing. Field

testing. Mechanical cone penetration test

岩土勘察与试验。场地试验。机械锥

入度试验（CPTM）。ICS 93.020

BS EN ISO 2560:2009Welding consumables. Covered electrodes for

manual metal arc welding of non-alloy and finegrain steels. Classification

2 - 焊接耗材

BS EN ISO 3766: 2003Construction drawings - Simplified

representation of concrete reinforcement

建筑制图——混凝土钢筋的简化表示

法ICS 01.100.30

BS EN ISO

7010:2012+A6:2016

Graphical symbols. Safety colours and safety

signs. Registered safety signs4 - 安全

BS EN ISO 8434-1:2007Metallic tube connections for fluid power and

general use. 24 degree cone connectors2 - 液体传动及通用金属管道连接

BS EN ISO 9445-1:2010Continuously cold-rolled stainless steel.

Tolerances on dimensions and form. Narrowstrip and cut lengths

2 - 连续冷轧不锈钢

BS EN ISO 9445-2:2010Continuously cold-rolled stainless steel.

Tolerances on dimensions and form. Wide stripand plate/sheet

2 - 连续冷轧不锈钢

BS EN ISO

17660-1:2006

Welding — Welding of

reinforcing steel —Part 1: Load-bearing welded jointsICS 25.160.10

焊接 —— 钢筋焊接——

第1部分：承载焊接接头ICS 25.160.10

BS EN ISO

17660-2:2006

Welding — Welding of

reinforcing steel —Part 2: Non load-bearing welded joints

焊接 —— 钢筋焊接——

第2部分：非承载焊接接头ICS 25.160.10

BS EN

12255-15:2003


plants —Part 15: Measurement of the oxygentransfer in clean water in aerationtanks of activated sludge plants


第15部分：活性污泥处理装置的曝气池内的清水氧转移的测量

ICS 13.060.30

BS EN

12255-16:2005


plants —Part 16: Physical (mechanical) filtration

废水处理装置—第16部分：物理（机

械）过滤ICS 13.060.30


EN 欧洲标准

BS EN

12504-3:2005

Testing concrete in

structures —Part 3: Determination of pull-out force

结构用混凝土试验 ——第3部分：拉

出力的测定ICS 91.100.30

BS EN

12504-4:2004

Testing concrete —

Part 4: Determination of ultrasonicpulse velocity

混凝土试验——

第4部分：超声波脉冲速率的测定ICS 91.100.30

BS EN

13391:2004

Mechanical tests for

post-tensioning systems后张系统用机械试验 ICS 91.080.40

BS EN

14188-2:2004

Joint fillers and

sealants —Part 2: Specifications for cold appliedsealantsThe

填缝料和密封剂——第2部分：冷用密

封剂的规范ICS 93.080.20

BS EN

14188-3:2006

Joint fillers and

sealants —Part 3: Specifications for preformedjoint seals

填缝料和密封剂——第3部分：预制接

缝密封件的规范ICS 91.100.50

BS EN

196-1:2005

Methods of testing

cement —Part 1: Determination of strength

水泥检验方法－

第1部分：强度的测定 ICS 93.100.10

BS EN

1991-1-3:2003+A1: 2015

Eurocode 1 – Actions

on structures –Part 1-3: General actions – Snow loads

欧洲规范 1——结构上的作用

第 1－3 部分：一般作用——雪荷载ICS 91.010.30

BS EN

1997-1:2004+A1:2013

Eurocode 7:

Geotechnical design —Part 1: General rules

欧洲规范7：岩土设计—

第1部分：总则 ICS 91.010.30；93.020

BS EN

1998-1:2004+A1:2013

Eurocode 8: Design of

structures forearthquakeresistance —Part 1: General rules, seismic actionsand rules for buildings

欧洲规范 8 ：抗震结构设计－

第1部分：一般规定、地震作用和建筑规定

ICS 91.120.25


EN 欧洲标准

BS EN 1536:2010+A1:2015Execution of special geotechnical work. Bored

piles.特殊土工工程实施。钻孔灌注桩。 ICS 93.020

BS EN 12699:2015Execution of special geotechnical works.

Displacement piles特殊岩土工程的执行。排土桩。 ICS 93.020

BS EN ISO 22476-

2:2005+A1:2011

Geotechnical investigation and testing. Field

testing. Dynamic probing

土工勘察和试验-现场试验-第2部分：

动力探测ICS 93.020

BS EN 1990:2002 Eurocode — Basis of structural design 结构设计基础 91.010.30

BS EN 1990/A2:2005 ANNEX A2 : Application for bridges (Normative)结构设计基础：附件 A2：桥梁上的应

用（标准化的）91.010.30

BS EN 1991-1-1:2002Eurocode 1: Actions on structures —

Part 1-1: General actions — Densities, self-weight, imposed loads for buildings

欧洲规范1——结构上的作用第1－1

部分：一般作用——建筑物的密度、自重和外加荷载

91.010.30


Part 1-2: General actions — Actions onstructures exposed to fire

结构上的作用：一般作用 — 对受火

结构的作用13.220.50; 91.010.30

BS EN 1991-1-3:2003Eurocode 1 — Actions on structures —

Part 1-3: General actions — Snow loads结构上的作用：一般作用——雪荷载 91.010.30


Part 1-4: General actions — Wind actions

结构上的作用：一般作用——风力作

用91.010.30


Part 1-5: General actions — Thermal actions结构作用：一般作用——热力作用 91.010.30


Part 1-6: General actions — Actions duringexecution

结构上的作用：一般作用 — 施工荷

载91.010.30


Part 1-7: General actions — Accidental

结构上的作用：一般作用 — 偶然作

用91.010.30

BS EN 1991-2:2003Eurocode 1: Actions on structures —

Part 2: Traffic loads on bridges结构上的作用：桥梁上的交通荷载 91.010.30; 93.040

BS EN 1991-3:2006Eurocode 1 — Actions on structures —

Part 3: Actions induced by cranes and

结构上的作用：由吊车和机器产生的

作用91.010.30

BS EN 1991-4:2006Eurocode 1 — Actions on structures —

Part 4: Silos and tanks结构上的作用：筒仓和储罐 91.010.30

BS EN 1991-4:2006Eurocode 2: Design of concrete structures —

Part 1-1: General rules and rules for

混凝土结构设计：一般规程与建筑设

计规程 91.010.30; 91.080.40


EN 欧洲标准

BS EN 1992-1-2:2004Eurocode 2: Design of concrete structures —

Part 1-2: General rules — Structural firedesign

混凝土结构设计：一般规则—结构防

火设计

13.220.50; 91.010.30;

91.080.40

BS EN 1992-2:2005Eurocode 2 — Design of concrete structures —

Part 2: Concrete bridges — Design anddetailing rules

混凝土结构设计：混凝土桥梁——结

构设计与细则

93.040; 91.010.30;

91.080.40

BS EN 1992-3:2006Eurocode 2 — Design of concrete structures —

Part 3: Liquid retaining and containmentstructures

混凝土结构设计：储水和挡水结构 91.010.30; 91.080.40

BS EN 1993-1-1:2005 原文文件无法打开钢结构设计：一般规定和建筑规定

BS EN 1993-1-2:2005Eurocode 3: Design of steel structures —

Part 1-2: General rules — Structural firedesign

钢结构设计：总则——结构防火设计

13.220.50; 91.010.30;

91.080.10

BS EN 1993-1-3:2006Eurocode 3 — Design of steel structures —

Part 1-3: General rules — Supplementary rulesfor cold-formed members and sheeting

钢结构设计：一般规则——冷成型构

件和薄板的补充规则91.010.30


Part 1-4: General rules — Supplementary rulesfor stainless steels

钢结构设计：一般规则——关于不锈

钢的补充规则91.040.01; 91.080.10


Part 1-5: Plated structural elements钢结构设计：板式结构件 91.010.30; 91.080.10


Part 1-6: Strength and Stability of ShellStructures

钢结构设计：壳体结构强度和稳定性

91.010.30; 91.080.10


Part 1-7: Plated structures subject to out ofplane loading

钢结构设计：承受面外荷载的板式结

构91.010.30; 91.080.10

BS EN 1993-1-8:2005Eurocode 3: Design of steel structures —Part

1-8: Design of joints钢结构设计：节点设计 91.010.30


Part 1-9: Fatigue钢结构设计：抗疲劳设计 91.010.30


Part 1-10: Material toughness and through-thickness properties

钢结构设计：材料韧性和全厚度特性 91.010.30


EN 欧洲标准


Part 1-11: Design of structures with tensioncomponents

钢结构设计：受拉构件设计91.010.30; 91.080.10;

93.040


Part 1-12: Additional rules for the extensionof EN 1993 up to steel grades S 700

钢结构设计：适用于S700及以下等级

钢材的 EN 1993 扩展部分附加规则91.010.30; 91.080.10

BS EN 1993-2:2006Eurocode 3 — Design of steel structures —

Part 2: Steel bridges钢结构设计：钢桥

91.010.30; 91.080.10;

93.040


Part 3-1: Towers, masts and chimneys — Towersand masts

钢结构设计：塔、桅杆和烟囱——塔

和桅杆91.010.30; 91.080.10


Part 3-2: Towers, masts and chimneys —Chimneys

钢结构设计：塔，桅杆和烟囱——烟

囱

91.010.30; 91.060.40;

91.080.10

BS EN 1993-4-1:2007Eurocode 3-Design of steel structures — Part

4-1: Silos钢结构设计：筒仓 91.080.10


Part 4-2: Tanks钢结构设计：罐体

23.020.01; 91.010.30;

91.080.10


Part 4-3: Pipelines钢结构设计：管线

23.040.01; 91.010.30;

91.080.10

BS EN 1993-5:2007Eurocode 3 - Design of steel structures - Part

5: Piling钢结构设计：桩基 91.010.30; 91.080.10

BS EN 1993-6:2007Eurocode 3 — Design of steel structures —

Part 6: Crane supporting structures钢结构设计：吊车支撑结构

53.020.20; 91.010.30;

91.080.10

BS EN 1994-1-1:2004Eurocode 4: Design of composite steel and

concrete structures —Part 1-1: General rulesand rules for buildings

钢与混凝土组合结构设计：一般规则

和建筑规则

91.010.30; 91.080.10;

91.080.40

BS EN 1994-1-2:2005Eurocode 4 — Design of composite steel and

concrete structures —Part 1-2: General rules— Structural fire design

钢与混凝土组合结构设计：一般规则

——结构防火设计

13.220.50; 91.010.30;

91.080.10; 91.080.40

BS EN 1994-2:2005Eurocode 4 — Design of composite steel and

concrete structures —Part 2: General rulesand rules for bridges

钢与混凝土组合结构设计：总则与桥

梁规则

91.010.30; 91.080.10;

91.080.40; 93.040


EN 欧洲标准

BS EN 1995-1-1:2004Eurocode 5: Design of timber structures —

Part 1-1: General — Common rules and rulesfor buildings

木结构设计：概述——通用规则和建

筑规则91.010.30; 91.080.20

BS EN 1995-1-2:2004 原文无法打开木结构设计：概述——结构防火设计

BS EN 1995-2:2004Eurocode 5: Design of timber structures —

Part 2: Bridges木结构设计：桥

91.010.30; 91.080.20;

93.040

BS EN 1996-1-1:2005 原文无法打开砌体结构设计：有筋和无筋砌体结构

的一般规则

BS EN 1996-1-2:2005 原文无法打开砌体结构设计：一般规则——结构防

火设计

BS EN 1996-2:2006Eurocode 6 — Design of masonry structures —

Part 2: Design considerations, selection ofmaterials and execution of masonry

砌体结构设计：砌体的设计考虑、材

料选择和施工91.010.30; 91.080.30

BS EN 1996-3:2006Eurocode 6 — Design of masonry structures —

Part 3: Simplified calculation methods forunreinforced masonry structures

砌体结构设计：无筋砌体结构的简化

计算方法91.010.30; 91.080.30

BS EN 1997-1:2004Eurocode 7: Geotechnical design —Part 1:

General rules岩土工程设计：总则 91.120.20

BS EN 1997-2:2007Eurocode 7 — Geotechnical design —Part 2:

Ground investigation and testing岩土工程设计：场地勘察和试验 91.060.01; 91.120.20

BS EN 1998-1:2004Eurocode 8 — Design of structures for

earthquake resistance—Part 1: Generalrules,seismic actions and rules for buildings

抗震结构设计：一般规定、地震作用

和建筑规定91.120.25


earthquake resistance —Part 2: Bridges结构抗震设计：桥梁 91.120.25; 93.040


earthquake resistance —Part 3: Assessment andretrofitting of buildings

结构抗震设计：建筑物评估和加固改

造91.120.25

BS EN 1998-4:2006Eurocode 8:Design of structures for earthquake

resistance —Part 4: Silos, tanks and抗震结构设计：筒仓、储罐和管道 91.120.25

BS EN 1998-5:2004Eurocode 8: Design of structures for

earthquake resistance —Part 5: Foundations,retaining structures and geotechnical aspects

抗震结构设计：基础、挡土结构和岩

土工程

91.120.25


EN 欧洲标准


earthquake resistance —Part 6: Towers, mastsand chimneys

抗震结构设计：塔架、桅杆与烟囱 91.120.25

NF EN 1999-1-1:2007Eurocode 9: Design of aluminium structures —

Part 1-1: General structural rules铝结构设计：总规则

77.150.10; 91.010.30;

91.080.10

BS EN 1999-1-2:2007Eurocode 9 — Design of aluminium structures

—Part 1-2: Structural fire design铝结构设计：结构抗火设计 91.010.30; 91.080.10

BS EN 1999-1-3:2007Eurocode 9: Design of aluminium structures —

Part 1-3: Structures susceptible to fatigue铝结构设计：疲劳敏感结构

77.150.10; 91.010.30;

91.080.10


—Part 1-4: Cold-formed structural sheeting铝结构设计：冷成型结构板材 91.010.30; 91.080.10


—Part 1-5: Shell structures铝结构设计：壳体结构

13.220.50; 91.010.30;

91.080.10

NF EN 1990 Eurocode — Basis of structural design有关第 NF EN1990 号法国/欧洲标准

的国家附件91.010.30 ; 91.080.01

NF EN 1991-1-1Eurocode 1 — Actions on structures — Part 1-

1: General actions —Densities, self weight,imposed loads for buildings

第NF EN 1991-1-1 号法国/欧洲标准

的国家附件密度、自重、建筑物的施工荷载

91.080.01

NF EN 1997-1-2005Eurocode 7:Geotechnical design-Part 1:General

rules

第NF EN1997-1：2005 号法国/欧洲标

准的国家附件93.020

NF EN 1992-1-1NA

Eurocode 2: Design of concrete structures —

Part 1-1 : General rules and rules forbuildings — National annex to NF EN 1992-1-1:2005 — General rules

第 NF EN 1992-1-1 :2005 号法国/欧

洲标准的国家附件：一般规则与建筑规则

91.010.30 ; 91.080.40

FA151261

Eurocode 1 — Actions on structures — Part 1-

3: General actions — Snow loads — National

annex to NF EN 1991-1-3:2004 — General

actions — Snow loads

第NF EN1991-1-3:2004 号法国/欧洲

标准的国家附件第1-3 部分: 一般作用力—雪荷载

91.010.30 ; 91.080.01


EN 欧洲标准

NF EN 1992-2 NA


Part 2 :Concrete bridges —Design and detailing

rules — National annex to NF EN 1992-2 —

Concrete bridges — Design and detailing rules

第NF EN 1992-2 号法国/欧洲标准的

国家附件

91.010.30 ; 91.080.40 ;

93.040

FA151418


Part 1-2 : General rules —Structural fire design

— National annex to NF EN 1992-1-2:2005 —

Structural fire design

第NF EN 1992‐1‐2:2005 号法国/欧

洲标准的国家附件耐火性能的计算

13.220.50 ; 91.010.30 ;

91.080.40

FA151617

Eurocode 8 — Design of structures for

earthquake resistance —Part 2: Bridges —

National Annex to NF EN 1998-2:2006 —

第NF EN 1998-2:2006 号法国/欧洲标

准的国家附件桥梁91.120.25 ; 93.040

FA151618


earthquake resistance —Part 5: Foundations,

retaining structures and geotechnical aspects

— National Annex to NF EN 1998-5:2005 —

Foundations, retaining structures and


准的国家附件基础、支挡构造物和土工技术概况

91.080.01 ; 91.120.25

FA151735


earthquake resistance —Part 6: Towers, masts

and chimneys — National Annex to NF EN

1998-6:2005 Towers, masts and chimneys


准的国家附件塔、支柱和烟囱91.080.01 ; 91.120.25

FA151736


earthquake resistance — Part 1: General

rules,seismic actions and rules for buildings —

National annex to NF EN 1998-1:2005 —

General rules, seismic actions and rules for


准的国家附件一般规则,地震作用力和建筑规则

91.080.01 ; 91.120.25

FA155316

Eurocode 1 : Actions on structures – Part 1-4

: General actions – Wind actions – Nationalannex to NF EN 1991-1-4 :2005 – Generalactions – Wind actions

第NF EN1991‐1‐4:2007 号法国/欧

洲标准的国家附件筒仓和储罐


EN 欧洲标准

FA154683

Eurocode 3 — Design of steel structures — Part

1-5 : Plated structural elements— National

Annex to NF EN 1993-1-5:2007 — Plated

第NF EN1993-1-5：2007 号法国/欧洲

标准的国家附件平板91.010.30 ; 91.080.10

FA154684

Eurocode 3 – Design of steel structures –

National Annex to NF EN 1993-1-4 : Generalrules – Supplementary rules for stainlesssteels General rules – Supplementary rulesfor stainless steels

第Pr NF EN 1993‐1‐4/NA 号法国/

欧洲标准国家附件的草案

FA144274

Eurocode 1 — Actions on structures — Part 1-2

: General actions —Actions on structures

exposed to fire — National annex to NF EN

1991-1-2 —Actions on structures exposed to

第NF EN 1991-1-2 号法国/欧洲标准

的国家附件暴露于火灾的结构上的作用力

13.220.50 ; 91.080.01

FA149357


1-2 : General rules — Structural firedesign —

National Annex to NF EN 1993-1-2-:2005 —

General rules — Structural firedesign

第 NF EN1993-1-2：2005 号法国/欧

洲标准的国家附件一般规则—耐火性能的计算

13.220.50 ; 91.010.30 ;

91.080.10

FA149358


1-9: Fatigue —National Annex to NF EN 1993-

1-9:2005 — Fatigue

第 NF EN1993-1-9：2005 号法国/欧

洲标准的国家附件疲劳91.010.30 ; 91.080.10

FA149359


1-10: Material toughness and through-

thickness properties — National Annex to NF

EN 1993-1-10:2005 — Material toughness and

through-thickness properties

第 NF EN 1993-1-10:2005 号法国/欧

洲标准的国家附件钢材质量选择91.010.30 ; 91.080.10

NF EN 1994-2

Eurocode 4 — Design of composite steel and

concrete structures —Part 2: General rules and

rules for bridges


准的国家附件一般规则和桥梁规则

91.010.30 ; 91.080.10 ;

91.080.40 ; 93.040


EN 欧洲标准

FA149361


concrete structures —Part 1-2 : General rules

— Structural fire design — National Annex to

NF EN 1994-1-2:2006 — General rules —


第NF EN1994-1-2:2006 号法国/欧洲

标准的国家附件一般规则—耐火性能的计算

13.220.50 ; 91.010.10 ;

91.080.10 ; 91.080.40

FA149362


concrete structures — Part 1-1: General rules

and rules for buildings — National Annex to NF

EN 1994-1-1:2005 — General rules and Rules

for buildings

第NF EN1994-1-1：2005 号标准的国

家附件一般规则和建筑规则

91.010.30 ; 91.080.10 ;

91.080.40

FA149363


1-8:Design of joints —National Annex to NF EN

1993-1-8:2005 — Design of joints

标准NF EN1993-1-8：2005 的国家附

件组装计算91.010.30 ; 91.080.10

FA149364


1-1 : General rules and rules for buildings —

National annex to NF EN 1993-1-1:2005 —

General rules and rules for buildings

第NF EN1993-1-1：2005 标准的国家

附件一般规则及建筑规则91.010.30 ; 91.080.10

0FA149365

Eurocode 5 : Design of timber structures —

Part 1-1: General — Common rules and rules

for buildings — National annex to NF EN 1995-

1-1:2005 — General —Common rules and rules

第 NF EN 1995-1-1:2005号法国/欧洲

标准的国家附件91.010.30 ; 91.080.20

NF_EN_1995-1-2 Eurocode 5 — Design of timber structures —

Part 1-2: General —Structural fire design

第 NF EN 1995-1-2:2005 号法国/欧

洲标准的国家附件概述-耐火结构计算

13.220.50 ; 91.010.30 ;

91.080.20

231-FA149367

Eurocode 5: Design of timber structures —

Part 2: Bridges —National annex to NF EN

1995-2:2005 — Bridges


准的国家附件桥梁

91.010.30 ; 91.080.20 ;

93.040

FA154685

Eurocode 3 : Design of steel structures –

Part 3-1 : Towers, masts and chimneys –Chimneys – National annex of NF EN 1993-3-2 -Towers, masts and chimneys – Towers and masts


欧洲标准的国家附件


EN 欧洲标准

FA154686


1-11 : Design of structures with tension

components — National Annex to NF EN 1993-

1-11:2007 —Design of structures with tension

第NF EN1993-1-11 ：2007 号法国/欧

洲标准的国家附件钢缆结构或受拉构件的计算

91.010.30 ; 91.080.10 ;

93.040

FA154687Eurocode 3 : Design of steel structures —

Part 2 : Steel bridges —National Annex to NFEN 1993-2:2007 — Steel bridges

第NF EN 1993-2 ：2007 号法国/欧洲

标准的国家附件钢桥

91.010.30 ; 91.080.10 ;

93.040

FA154688

: Eurocode 3 — Design of steel structures —

Part 1-3: General rules — Supplementary rules

for cold-formed members and sheeting —

National Annex to NF EN 1993-1-3:2007 —

General rules — Supplementary rules for cold-

formed members and sheeting

第NF EN1993-1-3 ：2007 法国/欧洲

标准的国家附件91.010.30 ; 91.080.10

FA154689

Eurocode 3 : Design of steel structures –

Part 3-2 : Towers, masts and chimneys –Chimneys – National annex of NF EN 1993-3-2 -Towers, masts and chimneys – Chimneys

第Pr NF EN 1993‐3‐2NA 号法国/欧

洲标准国家附件草案

NF en 1991-2NAEurocode 1 – Actions on structures –

National Annex to EN 1991-2 :2004 – Trafficloads on bridges

第Pr NF EN 1991-2/NA 号法国/欧洲

标准草案

FA155316

Eurocode 1 : Actions on structures – Part 1-4

: General actions – Wind actions – Nationalannex to NF EN 1991-1-4 :2005 – Generalactions – Wind actions

第Pr NF EN 1991-1-4/NA 号法国/欧

洲标准草案

FA155320Eurocode — Basis for design — National annex

to NF EN 1990/A1:2006

结构计算的基础第 NF EN

1990/A1:2006 号法国/欧洲标准的国91.010.30 ; 91.080.01

NA to BS EN 1996-2：2006

UK National Annex to Eurocode 6: Design of

masonry structures –Part 2: Design

considerations, selection of materials and

第NF EN1996-2：2006 号法国/欧洲标

准的国家附件圬工的设计、施工和材料选择

ISBN978 0 580 49783 6


EN 欧洲标准

FA155618

Eurocode 6 - Design of manso叩 structur，es -

Pa们 -2: General rules - Structural fire design -

National annex to NF EN 1996-1-2:2006 -



欧洲标准的草案

FA155747

Eurocode 1 : Actions on structures — Part 1-5

: General actions —Thermal actions — National

annex to NF EN 1991-1-5:2004 — General

actions —Thermal actions

第NF EN 1991-1-:2004 号法国/欧洲

标准的国家附件一般作用力—热力作用

91.010.30 ; 91.080.01

NF EN 1991-1-7NA

Eurocode 1 - Actions on structures – Part 1-7

: General actions – Accidental actions –National Annex to NF EN 1991-1-7:2007 –General actions – Accidental actions

第Pr NF EN 1991-1-7/NA 号法国/欧

洲标准草案

FA155999


earthquake resistance — Part 3 : Assessment

and retrofitting of buildings — National annex

to NF EN 1998-3:2005 — Assessment and


准的国家附件建筑物的计算和加固91.080.01 ; 91.120.25

FA156000


earthquake resistance — Part 4 : Silos, tanks

and pipelines — National annex to NF EN 1998-

4:2007 — Silos, tanks and pipelines


准的国家附件筒仓、储罐和管道系统 91.080.01 ; 91.120.25

FA157505

Eurocode 2 : Design of concrete structures –

Part 3 : Liquid retaining and containmentstructures – National annex to NF EN 1992-3– Rules for liquid retaining and containmentconcrete structures

第 Pr NF EN 1992-3/NA 号法国/欧洲

标准国家附件的草案

91.010.30 ; 91.080.40 ;

23.020.10

NA to BS EN 1990:2002UK National Annex for Eurocode 0 — Basis of

structural design

欧洲标准 0 — 结构设计基础之英国

国家附件91.010.30; 91.080.01

NA to BS EN 1991-1-1:2002

UK National Annex to Eurocode 1: Actions on

structures —Part 1-1: General actions —

Densities, self-weight, imposed loads for

欧洲标准 1 — 结构上的作用之英国

国家附件第一部分第一节：一般作用——建筑物的容重、自重和作用荷载

91.010.30

NA to BS EN 1991-1-2:2007Background paper to the UK National Annex to

BS EN 1991-1-2

欧洲规范英国标准1991-1-2之英国国

家附件之背景文件

13.220.50, 91.010.30,

91.080.01


EN 欧洲标准

NA to BS EN 1991-1-3:2003


structures —Part 1-3: General actions — Snow

loads

欧洲规范1: 对结构的作用-第1-3部

分: 一般作用-雪荷载之英国国家附件91.010.30; 91.080.01

NA to BS EN 1991-1-4:2005UK National Annex to Eurocode 1 – Actions on

structures Part 1-4: General actions – Windactions

欧洲标准1：结构的作用之英国国家附

件第1-4部分: 一般作用 – 风作用91.010.30

NA to BS EN 1991-1-5:2003


structures –Part 1-5: General actions – Thermal

actions

欧洲规范1：结构的作用 - 第1-5 部

分：一般作用 - 热作用之英国国家附件

91.010.30

NA to BS EN 1991-1-6:2005


structures –Part 1-6: General actions – Actions

during execution

欧洲规范1: 对结构的作用‐第1‐6部

分: 一般作用‐施工作用之英国国家附件

91.010.30

NA to BS EN 1991-1-7:2006National Annex to Eurocode 1: Actions on

structures –Part 1-7: Accidental actions

英国标准协会欧洲规范1 之国家附

件：结构作用第1-7 部分:偶然作用

91.010.30, 91.080.10,

93.040

NA to BS EN 1991-2:2003UK National Annex to Eurocode 1: Actions on

structures –Part 2: Traffic loads on bridges

欧洲规范1: 对结构的作用-第二部分:

桥上交通荷载之英国国家附件91.010.30; 93.040

NA to BS EN 1992-1-1:2004


concrete structures —Part 1-1: General rules

and rules for buildings

欧洲标准2：混凝土结构的设计英国

国家附件第1‐1 部分：一般规则和建筑规则

91.010.30; 91.080.40

NA to BS EN 1992-1-2:2004


concrete structures —Part 1-2: General rules —


欧洲标准2 — 混凝土结构设计之英国

国家附件第1‐2部分：一般规定——结构防火设计

13.220.50; 91.010.30;

91.080.40

NA to BS EN 1992-2:2005


concrete structure Part 2: Concrete bridges –

Design and detailing rules

欧洲规范2：混凝土结构设计第二部

分：混凝土桥-设计和细则之英国国家附件

93.040; 91.010.30;

91.080.40

NA to BS EN 1992-3:2006


concrete structures –Part 3: Liquid retaining

and containment structures

欧洲规范2：混凝土结构的设计 ‐ 第

3 部分：液体容纳和储存结构之英国国家附件

91.010.30; 91.080.40

NA to BS EN 1993-1-1:2005UK National Annex to Eurocode 3: Design of

steel structuresPart 1-1: General rules and rules for

欧洲规范3：钢结构设计第1-1 部

分：基本规则和房屋建筑的规则之英国国家附件

91.080.10


EN 欧洲标准

NA to BS EN 1993-1-

10:2005

National Annex (informative) to Eurocode 3 –

Design of steel structures –Part 1-10: Material toughness and throughthickness properties

国家附件（资料性）

欧洲规范3--钢结构设计—第1-10 部分:材料韧性和全厚度特性

91.080.10

NA to BS EN 1993-1-

11:2006


steel structuresPart 1-11: Design of structures with tensioncomponents

欧洲规范3 之英国国家附件：钢结构

设计第1-11 部分:带有受拉组件的结构设计

91.010.30, 91.080.10,

93.040

NA to BS EN 1993-1-

12:2007


steel structures –Part 1-12: Additional rules for

the extension of EN 1993 up to steel grades S

欧洲规范3 之英国国家附件：钢结构

设计第1-12部分: 对于EN 1993到钢等级S 700的范围的附加法规

91.010.30; 91.080.10

NA to BS EN 1993-1-2:2005


steel structures Part 1-2: General rules –



分：一般规定-结构防火设计之英国国家附件

13.220.50, 91.010.30,

91.080.10

NA to BS EN 1993-1-3:2006


steel structuresPart 1-3: General rules – Supplementary rulesfor cold-formed members and sheeting


分：一般规定-冷铸薄壁构件和板栅的补充规则之英国国家附件

91.010.30

NA to BS EN 1993-1-4:2006


steel structuresPart 1-4: General rules – Supplementary rulesfor stainless steels


分：一般规定-不锈钢的补充规则之英国国家附件

91.040.01, 91.080.10


steel structures –Part 1-5: Plated structural


分：平板结构之英国国家附件91.010.30; 91.080.10


steel structuresPart 1-8: Design of joints


分：接缝设计之英国国家附件77.140.30


steel structures –Part 1-9: Fatigue


分：疲劳之英国国家附件91.010.30

NA to BS EN 1993-2:2006UK National Annex to Eurocode 3: Design of

structures –Part 2: Steel bridges

欧洲规范3 之英国国家附件：结构设

计—第2部分:钢桥

91.010.30; 81.080.10;

93.040


EN 欧洲标准

NA to BS EN 1994-1-1:2004


composite steel and concrete structures –Part

1-1: General rules and rules for buildings

欧洲规范4 之英国国家附件：复合钢

和混凝土结构设计第1-1部分:一般规则以及建筑物规则

91.010.30; 91.080.10;

91.080.40

NA to BS EN 1994-1-2:2005



1-2: General rules – Structural fire design


和混凝土结构设计第1-2部分:一般规则 — 结构防火设计

13.220.50; 91.010.30;

91.080.10; 91.080.40

NA to BS EN 1994-2:2005



2: General rules and rules for bridges


和混凝土结构的设计—第2部分:一般规则和桥梁规则

91.010.30; 91.080.10;

91.080.40; 93.040

NA to BS EN 1995-1-1:2004


timber structures –Part 1-1: General – Common

rules and rules for buildings

欧洲规范5：木结构的设计 ‐ 第1‐1

部分：一般规定 – 通则和建筑规则之英国国家附件

91.010.30; 91.080.20

NA to BS EN 1995-1-2:2004


timber structures –Part 1-2: General –


欧洲规范5: 木结构设计-第1-2部分:

总则 – 结构防火设计之英国国家附件

13.220.50; 91.010.30;

91.080.20


timber structures –Part 2: Bridges

欧洲规范5：木结构的设计 - 第2 部

分：桥梁之英国国家附件

91.010.30; 91.080.20;

93.040

NA to BS EN 1996-1-1:2005


masonry structures –Part 1-1: General rules for

reinforced and unreinforced masonry structures

欧洲规范6：砌体结构的设计 ‐ 第1

‐1 部分：配筋和无筋砌体结构的通则之英国国家附件

91.010.30; 91.080.30

NA to BS EN 1996-1-2:2005


masonry structures –Part 1-2: General rules –


欧洲规范6：砌体结构的设计 - 第1-2

部分：一般规则 – 结构防火设计之英国国家附件

13.220.50; 91.010.30;

91.080.30

NA to BS EN 1996-2:2006


masonry structures –Part 2: Design

considerations, selection of materials and

欧洲规范6 之英国国家附件：砖石工

程结构的设计—第2部分:设计依据，材料的选择以及砖石工程的执行

91.010.30; 91.080.30

NA to BS EN 1996-3:2006


masonry structures – Part 3: Simplified

calculation methods for unreinforced masonry

欧洲规范6：砌体结构的设计 ‐ 第3

部分：无筋砌体结构的简化计算方法之英国国家附件

91.010.30; 91.080.30


EN 欧洲标准

NA to BS EN 1997-1:2004UK National Annex to Eurocode 7: Geotechnical

design –Part 1: General rules

欧洲规范7: 土工学设计-第一部分:

一般规定之英国国家附件91.010.30

NA to BS EN 1998-1:2004


structures for earthquake resistance –Part 1:

General rules, seismic actions and rules for

欧洲规范8：结构抗震设计第一部

分：总则——地震作用和房屋建筑规则之英国国家附件

91.120.25

NA to BS EN 1998-4:2006



Silos, tanks and pipelines

欧洲规范8：结构抗震设计第四部

分：筒仓、容器和管道之英国国家附件

91.120.25

NA to BS EN 1998-5:2004



Foundations, retaining structures and

geotechnical aspects

欧洲规范：结构抗震设计第五部分：

地基、支护结构和土工技术之英国国家附件

91.120.25

NA to BS EN 1998-6:2005



Towers, masts and chimneys

欧洲规范8：结构抗震设计第六部

分：塔，杆和烟囱之英国国家附件91.120.25


aluminium structures – Part 1-1: Generalstructural rules

欧洲规范9：铝结构设计——第1-1 部

分：结构一般规则之英国国家附件

77.150.10, 91.010.30,

91.080.10


aluminium structures – Part 1-3: Structuressusceptible to fatigue


分：疲劳敏感性结构之英国国家附件77.150.10, 91.080.10


aluminium structures –Part 1-4: Cold-formed structural sheeting


分：冷铸结构片材之英国国家附件91.010.30; 91.080.10


aluminium structures Part 1-5: Shell


分：壳体结构之英国国家附件91.010.30; 91.080.10


aluminium structures –Part 1-2: Structuralfire design


分：结构性防火设计之英国国家附件除

13.220.50; 91.010.30;

91.080.10

BS EN 10025-1Hot rolled products of structural steels —

Part 1: General technical delivery conditions热轧结构钢产品：一般技术交货条件 77.140.10; 77.140.50


EN 欧洲标准

BS EN 10025-2 Hot rolled products of structural steels —

Part 2: Technical delivery conditions for non-alloy structural steels

热轧结构钢产品：非合金结构钢的交

货技术条件

77.140.10; 77.140.45;

77.140.50

BS EN 10025-3

Hot rolled products of structural steels —

Part 3: Technical delivery conditions fornormalized/normalized rolled weldable finegrain structural steels

热轧结构钢产品：标准及适于焊接的

细晶粒结构标准卷轧钢制品交货技术条件

77.140.10; 77.140.50

BS EN 10025-4


Part 4: Technical delivery conditions forthermomechanical rolled weldable fine grainstructural steels

热轧结构钢产品：热机轧制可焊接细

晶粒结构钢的交货技术条件 77.140.10; 77.140.50

BS EN 10025-5


Part 5: Technical delivery conditions forstructural steels with improved atmosphericcorrosion resistance

热轧结构钢产品：增强型耐大气腐蚀

结构钢交货技术条件77.140.10; 77.140.50

BS EN 12495 Cathodic protection for fixed steel offshore

structures近海工程固定钢结构的阴极保护 47.020.01; 77.060

BS EN 10021 General technical delivery conditions for

steel products通用钢材技术交货条件 77.140.01

BS EN 1008

Mixing water for concrete — Specification for

sampling, testing and assessing thesuitability of water, including waterrecovered from processes in the concreteindustry, as mixing water for concrete

混凝土混合用水 —取样、测试、评估

用水适宜性91.100.30

BS EN 1011-2Welding — Recommendations for welding of

metallic materials —Part 2: Arc welding offerritic steels

焊接——焊接金属材料的推荐第 2部

分：铁素体钢的弧焊25.160.10

BS EN 1011-3 Welding — Recommendations for welding of

metallic materials —Part 3: Arc welding ofstainless steels

焊接——焊接金属材料的推荐第 3部

分：不锈钢的弧焊 25.160.10

BS EN 10113-2Hot-rolled products in weldable fine grain

structural steels Part 2. Delivery conditionsfor normalizedlnormalized rolled steels

可焊接细粒结构钢的热轧制品：正火/

正火轧制钢的交货条件 77.140.10

BS EN 12620 Aggregates for concrete 混凝土集料 91.100.15; 91.100.30


EN 欧洲标准BS EN 13139 Aggregates for mortar 砂浆用集料 91.100.15

BS EN 13509 Cathodic protection measurement techniques 阴极防护的测量技术 25.220.40; 77.060

BS EN 15085-4-2007 中文Railway applications — Welding of railway

vehicles and components —Part 4:Productionrequirements

铁路应用.铁路车辆和组件的焊接.第4

部分生产要求25.160.10; 45.060.01

BS EN 15085-5-2007 中文Railway applications — Welding of railway

vehicles and components —Part 5 Inspection,testing and documentation

铁路设施.铁路车辆和组件的焊接.第5

部分检验、测试和文件编制25.160.10; 45.060.01

BS EN 50261-1999 中文Railway applications Ð Mounting of electronic

equipment铁路设施.电子设备的安装 29.280; 45.060.10

BS EN 12299-2009_ 中文Railway applications— Ride comfort

for passengers —Measurement and evaluation

铁路应用-乘客的乘坐舒适度-测量和

评估13.160; 45.060.20

BS EN 13145-2001 中文Railway applications — Track — Wood sleepers

and bearers铁路设施.轨道.枕木和承木 79.040; 93.100

BS EN 13146-1：2002 中文Railway applications — Track — Test methods

for fastening systems —Part 1: Determinationof longitudinal rail restraint

铁路设施.轨道.紧固系统的试验方法.

第1-1部分：纵向钢轨约束的测定93.100

BS EN 13146-2：2002 中文Railway applications — Track — Test methods

for fastening systems —Part 2: Determinationof torsional resistance

铁路设施.轨道.紧固系统的测试方法.

第2部分：抗扭强度的测定93.100

BS EN 13146-3-2002 中文Railway applications — Track — Test methods

for fastening systems —Part 3: Determinationof attenuation of impact loads

铁路设施.轨道.紧固系统的检测方法.

第3部分：冲击荷载衰减量的测定93.100

BS EN 13146-5-2002_中文Railway applications — Track — Test methods

for fastening systems —Part 5: Determinationof electrical resistance

铁路应用--轨道--紧固系统的试验方

法--第五部分：电阻的测定 93.100


for fastening systems —Part 6: Effect ofsevere environmental conditions

铁路设施.轨道.紧固系统的测试方

法.第6部分：恶劣环境条件的影响19.040; 93.100


for fastening systems —Part 7: Determinationof clamping force

铁路设施.轨道.紧固系统的检测方法.

紧固力的测定93.100

BS EN 13230-1-2009_中文Railway applications— Track — Concrete

sleepers and bearers Part 1: Generalrequirements

铁路应用-轨道--混凝土轨枕和支承

第一部分：总体要求45.080; 91.100.30; 93.100


EN 欧洲标准

BS EN 13230-2-2009_中文Railway applications— Track — Concrete

sleepers and bearers Part 2: Prestressedmonoblock sleepers

铁路应用--轨道--混凝土轨枕和支承

第二部分：预应力单块式轨枕45.080; 91.100.30; 93.100

BS EN 1418

Welding personnel Ð Approval testing of

welding operators for fusion welding andresistance weld setters for fully mechanizedand automatic welding of metallic materials

焊接人员：金属材料的全机械化和自

动化焊接的熔焊操作工及电阻焊安装工的资质认证

25.160.10

BS EN 15257Cathodic protection — Competence levels and

certification of cathodic protection personnel

阴极保护:阴极保护工作人员的能力水

平和认证77.060

BS EN 444-1994Non-destructive testing—General principles

for radiographic examination of metallicmaterials by X- and gamma-rays

无损检测：用X和γ射线对金属材料进

行射线检查的一般原则UDC 620.179.152:669.1

BS EN 462-2-1994

Non-destructive testing — Image quality of

radiographs —Part 2: Image quality indicators(step/hole type) — Determination of imagequality value

无损检测：射线照相的成像质量 - 成

像质量指示仪（齿型/缺口型）-成像质量的确定

UDC

620.179.152:771.537:001.

4


Part 1: General technical delivery conditions热轧结构钢产品：一般技术交货条件 77.140.10; 77.140.50


Part 2: Technical delivery conditions for non-alloy structural steels

热轧结构钢产品：非合金结构钢的交

货技术条件

77.140.10; 77.140.45;

77.140.50

BS EN 12390-5:2009Testing hardened concrete Part 5: Flexural

strength of test specimens

硬质混凝土的测定第五部分：试样的

绕曲强度 91.100.30

BS EN 12390-6:2009Testing hardened concrete Part 6: Tensile

splitting strength of test specimens

硬化混凝土试验—第6部分：试样的劈

裂抗拉强度91.100.30

BS EN 12390-7:2009Testing hardened concrete Part 7: Density of

hardened concrete

硬化混凝土试验第7部分:硬化混凝土

密度 91.100.30

BS EN 12504-1:2009Testing concrete in structures Part 1: Cored

specimens — Taking, examining and testing incompression

结构上使用的混凝土试验第1部分：

芯样— 取样，检查和压缩试验；91.100.30

BS EN 1377‐2:1990

Methods of test for Soils for civil

englneerlng purposes Part 2: Classificationtests

土木工程用土壤测试方法—第2 部

分：分类测试?


EN 欧洲标准

BS EN 772-1:2011Methods of test for masonry units Part 1:

Determination of compressive strength

砌体砌筑单元的试验方法第1部分：

抗压强度的测定91.100.25

BS EN 10002-1: 2001Metallic materials-Tensile testing- Part 1:

Method of test at ambient temperature

金属材料—拉伸试验第一部分：室温

下的测试方法77.040.10

BS EN 10021: 2006General technical delivery conditions for

steel products钢产品一般交货技术条件 77.140.01

BS EN 10045-1: 1990Charpy impact test on metallic materials —

Part 1: Test method (V-and U-notches)

金属材料夏比冲击试验第一部分：测

试方法（V 和U 型缺口）UDC 669:620.178.746.22

BS EN 10088-2: 2005Stainless steels —Part 2: Technical delivery

conditions for sheet/plate and strip ofcorrosion resisting steels for general

不锈钢—第 2 部分：通用耐腐蚀钢的

薄钢板/钢板和带钢的技术交货条件77.140.20; 77.140.50

BS EN 10088-3: 2005

Stainless steels —Part 3: Technical delivery

conditions for semi-finished products, bars,rods, wire, sections and bright products ofcorrosion resisting steels for general

不锈钢—第3 部分：用耐蚀钢制成的

一般用途的半成品,棒钢,轧制线材，拉制线材，型钢和冷拨钢制品的供应技术条件

77.140.50; 77.140.65;

77.140.20

BS EN 10202: 2001Cold reduced tinmill products — Electrolytic

tinplate and electrolytic chromium/ chromiumoxide coated steel

冷轧镀锡产品—电解锡板和电解铬/氧

化铬镀层钢77.140.50

BS EN 10228-1: 1999Non-destructive testing of steel forgings --

Part 1: Magnetic particle inspection

钢锻件的无损检测第 1 部分：磁粉

检查77.140.85

BS EN 10228-3: 1999Non-destructive testing of steel forgings -

Part 3: Ultrasonic testing of ferritic ormartensitic steel forgings

钢锻件的无损检测第 3 部分：铁素

体、马氏体钢锻件超声检测77.040.20; 77.140.85

BS EN 10253-2: 2007Butt-welding pipe fittings —Part 2: Non alloy

and ferritic alloy steels with specificinspection requirements

对焊管件 — 第2 部分：具有特殊检

验要求的非合金钢和铁素体合金钢23.040.40

BS EN 10253-3: 2008

Butt-welding pipe fittings Part 3: Wrought

austenitic and austenitic-ferritic (duplex)stainless steels without specific inspectionrequirements

对焊管件 — 第3 部分：无特殊检验

要求的锻制奥氏体和铁素体-奥氏体（双相）不锈钢

23.040.40; 77.140.20

BS EN 10253-4: 2008

Butt-welding pipe fittings —Part 4: Wrought

austenitic and austenitic-ferritic (duplex)stainless steels with specific inspectionrequirements

对焊管件 — 第4 部分：具有特殊检

验要求的锻制奥氏体和铁素体-奥氏体（双相）不锈钢

23.040.40; 77.140.20

BS EN 10293:2005 Steel castings for general engineering uses 一般工程用钢铸件 77.140.80


EN 欧洲标准

BS EN 1043-1: 1996Destructive tests on welds in metallic

materials. Hardness testing —Part 1: Hardnesstest on arc welded joints

金属材料焊缝破坏性试验 — 硬度试

验 — 第一部分：弧焊接头的硬度试验

25.160.40

BS EN 1097-2:2010Tests for mechanical and physical properties

of aggregates Part 2: Methods for thedetermination of resistance to fragmentation

集料力学和物理特性试验第二部分：

测定破碎阻力的方法91.100.15


of aggregates Part 5: Determination of thewater content by drying in a ventilated oven

集料力学和物理特性试验第五部分：

通过风箱干燥法确定含水量 91.100.15


of aggregates —Part 6: Determination ofparticle density and water absorption

集料的力学性能和物理

性能试验—第 6 部分：确定颗粒物的密度和吸水率

91.100.15


of aggregates Part 8: Determination of thepolished stone value

集料的机械特性和物理特性的试验第

八部分：抛光石料值的测定91.100.15

BS EN 12350-11:2010Testing fresh concrete Part 11: Self-

compacting concrete — Sieve segregation test

新拌混凝土试验第11部分：自压实混

凝土— 筛分离试验 91.100.30

BS EN 12350-1:2009 Testing fresh concrete Part 1: Sampling 新拌混凝土试验第1部分：取样 91.100.30

BS EN 12350-2:2009 Testing fresh concrete Part 2:Slump-test新拌混凝土测试第二部分：坍落度测

试91.100.30

BS EN 12350-3:2009 Testing fresh concrete Part 3: Vebe test新拌混凝土试验第3部分：维氏（稠

度）试验91.100.30,

BS EN 12350-4:2009Testing fresh concrete Part 4: Degree of

compactability新拌混凝土试验第 4 部分：压实度 91.100.30,

BS EN 12350-7:2009Testing fresh concrete Part 7: Air content —

Pressure methods

新拌混凝土试验第7部分：空气含量

——压力法91.100.30

BS EN 12390-1:2000

Testing hardened concrete - Part 1: Shape，

dimensions and other requirements for test

specimens and moulds

测试硬化混凝土第1部分：样品和模

具的形状，尺寸和其他要求91.100.30

BS EN 12390-2:2009Testing hardened concrete Part 2: Making and

curing specimens for strength tests

硬化混凝土试验第二部分：制作和养

护强度试验用试样91.100.30

BS EN 12390-3:2009Testing hardened concrete Part 3: Compressive

strength of test specimens

硬化混凝土试验第3部分：试样的抗

压强度91.100.30

BS EN 12390-4:2000Testing hardened concrete -Part 4: Compressive

strength - Specification for testing machines硬化混凝土的测试第四部分：抗压强

度—试验器的规格91.100.30


EN 欧洲标准

BS EN 12591:2009Bitumen and bituminous binders—

Specifications for paving grade bitumens沥青和沥青粘合剂—铺路级沥青规范 91.100.50; 93.080.20

BS EN 13036-1:2010

Road and airfield surface characteristics—

Test methods Part 1: Measurement of pavementsurface macrotexture depth using a volumetricpatch technique

道路和机场表面特征-试验方法第一

部分：利用体积补片技术测量路面表面宏观结构深度

17.040.20; 93.080.10;

93.120

BS EN 13036-4:2003

Road and airfield surface characteristics —

Test methods —Part 4: Method for measurementof slip/skid resistance of a surface — Thependulum test

道路和机场表面特征—试验方法—第

四部分：表面耐滑性的测量方法 —摆动法

17.040.20; 93.080.20

BS EN 13043:2002Aggregates for bituminous mixtures and surface

treatments for roads, airfields and othertrafficked areas

道路、机场和其他交通区域用沥青混

合料和路面处理的集料91.100.15;93.080.20

BS EN 13108-1:2006Bituminous mixtures —Material specifications

—Part 1: Asphalt Concrete

沥青混合料—材料规范—第1 部分：

沥青混凝土 93.080.20

BS EN 1317-1：2010Road restraint systems Part 1: Terminology and

general criteria for test methods

道路防护系统第1部分：试验方法术

语和通用标准

01.040.13; 01.040.93;

13.200; 93.080.30

BS EN 1317-2:2010Road restraint systems —Part 2: Performance

classes, impact test acceptance criteria andtest methods for safety barriers

道路防护体系 — 第2部分：安全栅栏

的性能等级、碰撞试验、验收标准和试验方法

13.200; 93.080.30

BS EN 1317-3:2010Road restraint systems Part 3: Performance

classes, impact test acceptance criteria andtest methods for crash cushions

道路防护系统第3部分：防撞垫的性

能等级、撞击试验验收标准和试验方法

13.200; 93.080.30

BS EN 13242:2002+A1:2007Aggregates for unbound and hydraulically bound

materials for use in civil engineering workand road construction

土木工程施工和道路建筑用非粘合的

和液压结合材料用集料91.100.15

BS EN 13285:2010 Unbound mixtures —Specifications 松散混合料—规范 93.080.20

BS EN 13877-3：2004Concrete pavements —Part 3: Specifications

for dowels to be used in concrete pavements

混凝土路面—第3部分：混凝土路面用

传力杆规范 93.080.20

BS EN 14188-1:2004Joint fillers and sealants — Part 1:

Specifications for hot applied sealants

填缝料和密封胶第1部分：热敷式密

封胶规范 93.080.20

BS EN 14419: 2009District heating pipes— Preinsulated bonded

pipe systems for directly buried hot waternetworks —Surveillance systems

区域供暖管道—直埋式热水供应网用

预绝热连接管道系统—监视系统 23.040.01

BS EN 1824:2011 Road marking materials - Road trials 路标材料—道路试验 93.080.30


EN 欧洲标准BS EN 1871:2000 Road marking materials Ð Physical properties 道路标记材料—物理性能 93.080.20

BS EN 197-1:2011Cement Part 1: Composition, specifications and

conformity criteria for common cements

水泥第1部分：普通水泥的组成、规

格和一致性标准91.100.10

BS EN 253: 2009

District heating pipes — Preinsulated bonded

pipe systems for directly buried hot waternetworks— Pipe assembly of steel servicepipe, polyurethane thermal insulation andouter casing of polyethylene

区域供暖管道——直埋热水管道网络

预保温粘合管道系统——供水钢管、聚氨酯保温层以及聚乙烯套管组成的管道装配

23.040.10

BS EN 12007-2:2012

Gas infrastructure — Pipelines for maximum

operating pressure up to and including 16 barPart 2: Specific functional requirements forpolyethylene (MOP up to and including 10 bar)

燃气基础设施—最大工作压力≤16巴

的管路—第2部分：聚乙烯管的专门功能要求(MOP≤10巴)

23.040.20

BS EN 12007-3:2000

Gas supply systems Ð Pipelines for maximum

operating pressure up to and including 16 bar-Part 3: Specific functional recommendationsfor steel

气体供应系统—最大工作压力≤16巴

的管路—第3部分：钢管的专用功能推荐

75.200; 77.140.75

BS EN 12007-4:2012

Gas infrastructure — Pipelines for maximum

operating pressure up to and including 16 barPart 4: Specific functional requirements forrenovation


的管路—第4部分：修复管的专门功能要求

75.200

BS EN 12056-1:2000Gravity drainage systems inside buildings -

Part 1: General and performance requirements

建筑物内部的重力排水系统—第1部

分：一般和性能要求01.040.91; 91.140.80


Part 4: Wastewater lifting plants- Layout andcalculation


分：废水提升设备—设计和计算 91.140.80


Part 5: Installation and testing, instructionsfor operation, maintenance and use


分：安装、检验、使用说明、维修和使用

91.140.80

BS EN 12201-1:2011Plastics piping systems for water supply, and

for drainage and sewerage under pressure —Polyethylene (PE) Part 1: General

供水、压力排水和排污用塑料管道系

统—聚乙烯（PE）第1 部分：总则

23.040.01,91.140.60,93.0

30

BS EN 12201-4:2012Plastics piping systems for water supply, and

for drainage and sewerage under pressure—Polyethylene (PE)Part 4: Valves

供水用和压力排水管和下水道用塑料

管道系统—聚乙烯(PE) 第4部分:阀门23.060.01; 91.140.60


EN 欧洲标准

BS EN 12201-5:2011

Plastics piping systems for water suppli,and

for drainage and sewerage under pressure —Polyethylene (PE) Part 5: Fitness for purposeof the system

供水、压力排水和排污用塑料管道系

统—聚乙烯（PE）第5 部分：系统的适用性

23.040.01;91.140.60,93.0

30

BS EN 12327:2012Gas infrastructure — Pressure testing,

commissioning and decommissioning procedures—Functional requirements

燃气供应系统—压力试验、交付使用

和停止使用过程—功能要求91.140.40

BS EN 12665:2011Light and lighting —Basic terms and criteria

for specifying lighting requirements

光和照明—规定照明要求的基本术语

和指标01.040.91; 91.160.01

BS EN 13032-3:2007Measurement and presentation of photometric

data of lamps and luminaires —Part 3:Presentation of data for emergency lighting of

灯和灯具光度数据的测量和表示—第3

部分：工作区域应急照明数据表示

17.180.20; 29.140.40;

91.160.10

BS EN 13508-2:2003Conditions of drain and sewer systems outside

buildings-Part 2:Visual inspection coding

建筑物外部排水和排污系统调查和评

估-第2 部分：目视检查编码系统93.030

BS EN 14240:2004Ventilation for buildings — Chilled ceilings

— Testing and rating

建筑物通风—冷凝天花板—试验和评

级 91.140.30

BS EN 50085-2-3:2010

Cable trunking systems and cable ducting

systems for electrical installations Part 2-3:Particular requirements for slotted cabletrunking systems intended for installation incabinets

电气装置用电缆干线系统和电缆管道

系统第2-3部分：配电室设备用有槽电缆干线系统的特殊要求

29.120.10

BS EN 50086-2-1:1996Specification for Conduit systems for cable

management —Part 2: Particular requirements—Section 2.1: Rigid conduit systems

电缆管理用管道系统规范—第2部分：

特殊要求—第2.1部分：刚性管道系统29.120.10


management —Part 2: Particular requirements—Section 2.2: Pliable conduit systems


特殊要求—第2.2部分：挠性管道系统29.120.10


management —Part 2: Particular requirements—Section 2.3: Flexible conduit systems


特殊要求—第2.3部分：柔性管道系统29.120.10

BS EN 50086-2-4:1994Specification for conduit systems for cable

management —Part 2: Particular requirements—Section 2.4: Conduit systems buried


特殊要求—第2.4部分：埋入地下管道系统

UDC 621.315.2:696.6


EN 欧洲标准

BS EN 50133-2-1:2000Alarm systems Ð Access control systems for

use in security applications -Part 2-1:General requirements for components

警报系统—安全应用场合用访问控制

系统—第2-1部分：元件一般要求13.320

BS EN 50164-1:2008Lightning Protection Components (LPC) —Part

1: Requirements for connection components

防雷元件（LPC）—第1部分：连接元

件要求91.120.40

BS EN 50164-2:2008Lightning Protection Components (LPC) —Part

2: Requirements for conductors and earth

防雷元件（LPC）—第2部分：导体和

接地电极要求91.120.40

BS EN 50171:2001 Central power supply systems 中央供电系统 29.200; 91.160.10

BS EN 50172:2004 Emergency escape lighting systems 应急逃逸照明系统 91.160.00

BS EN 60598-2-2:2012Luminaires Part 2-2: Particular requirements

— Recessed luminaires

灯具第2-2部分：特殊要求—嵌入式

灯具29.140.40

BS EN 60598-2-3:2003Luminaires —Part 2-3: Particular requirements

— Luminaires for road and street lighting

灯具—第2-3部分：道路与街路照明灯

具的安全要求 29.140.40; 93.080.30

BS EN 60598-2-12:2013Luminaires Part 2-12: Particular requirements

— Mains socket-outlet mounted nightlights

灯具第2-12部分：特殊要求—电源插

座安装的夜灯29.140.40

BS EN 60598-2-13:2006Luminaires —Part 2-13: Particular

requirements — Ground recessed luminaires

灯具第2-13部分：特殊要求—地面嵌

入式灯具29.140.40

BS EN 61557-2:2007

Electrical safety in low voltage distribution

systems up to 1 000 V a.c. and 1 500 V d.c.— Equipment for testing, measuring ormonitoring of protective measures —Part 2:Insulation resistance

交流1 000 V和直流1 500 V以下低压

配电系统电气安全防护措施的试验测量或监控设备、第2部分:绝缘电阻

17.220.20; 29.080.01;

29.240.01

BS EN 61557-4:2007


systems up to 1 000 V a.c. and 1 500 V d.c.— Equipment for testing, measuring ormonitoring of protective measures —Part 4:Resistance of earth connection and


配电系统电气安全防护措施的试验测量或监控设备、第4部分:接地电阻和等电位接地电阻

17.220.20; 29.080.01;

29.240.01

BS EN 61557-5:2007


systems up to 1 000 V a.c. and 1 500 V d.c.— Equipment for testing, measuring ormonitoring of protective measures — Part 5:Resistance to earth


配电系统电气安全防护措施的试验测量或监控设备、第5部分: 对地阻抗

17.220.20; 29.080.01;

29.240.01


EN 欧洲标准

BS EN 61557-6:2007


systems up to 1 000 V a.c. and 1 500 V d.c.— Equipment for testing, measuring ormonitoring of protective measures —Part 6:Effectiveness of residual current devices(RCD) in TT, TN and IT systems


配电系统电气安全防护措施的试验测量或监控设备、第6部分：在TT，TN及IT系统中的残留电流装置（RCD）效能

17.220.20; 29.080.01;

29.240.01

DIN EN 1112:2008

Sanitary tapware –Shower outlets for sanitary

tapware for water supply systems of type 1 andtype 2 –General technical specificationEnglish version of DIN EN 1112:2008-06

卫生龙头 – 用于第一、二类供水系

统的卫生龙头花洒排水装置 – 通用技术规格

91.140.70

BS EN 12464-1:2011Light and lighting — Lighting of work places

Part 1: Indoor work places

光和照明—工作场所照明第1部分：

室内工作场所13.180; 91.160.10

BS EN 12665:2011Light and lighting —Basic terms and criteria

for specifying lighting requirements

光和照明—规定照明要求的基本术语

和指标01.040.91; 91.160.01

BS EN 50172:2004 Emergency escape lighting systems 应急逃逸照明系统 91.160.00

BS EN 50395:2005Electrical test methods for low voltage energy

cables低压电缆电气测试方法 29.060.20

BS EN 60598-2-22:1998Luminaires —Part 2-22: Particular

requirements — Luminaires for emergency

灯具第2-12部分：特殊要求—应急照

明灯具29.140.40; 91.160.10

BS EN 50173-2-2007+A1-

2010

Information technology — Generic cabling

systems —Part 2: Office premises

信息技术-通用布线系统-第二部分：

第三产业楼宇 33.040.50

BS EN 50173-3-2007+A1-

2010


systems Part 3: Industrial premises

信息技术-通用布线系统-第3部分：工

业领域建筑35.11

BS EN 50173-4-2007+A1-

2010


systems —Part 4: Homes

信息技术-通用布线系统-第4部分：住

宅楼宇33.040.50

BS EN 50173-5-2007+A1-

2010


systems —Part 5: Data centres

信息技术-通用布线系统-第5部分：数

据中心33.040.50

BS EN 448: 2009

District heating pipes— Preinsulated bonded

pipe systems for directly buried hot waternetworks —Fitting assemblies of steel servicepipes, polyurethane thermal insulation andouter casing of polyethylene


预保温粘合管道系统——聚氨酯绝热和聚乙烯外壳钢制给水管的成套配件

23.040.40


EN 欧洲标准

BS EN 488: 2011

District heating pipes —Preinsulated bonded

pipe systems for directly buried hot waternetworks — Steel valve assembly for steelservice pipes, polyurethane thermal insulationand outer casing of polyethylene


预保温粘合管道系统——用于供水钢管、聚氨酯保温层以及聚乙烯套管的钢阀装配

23.060.01; 91.140.60

BS EN 489: 2009

District heating pipes— Preinsulated bonded

pipe systems for directly buried hot waternetworks —Joint assembly for steel servicepipes, polyurethane thermal insulation andouter casing of polyethylene


预保温粘合管道系统——用于供水钢管、聚氨酯保温层以及聚乙烯套管的管接头装配

23.040.01; 91.140.60

BS EN 772-2:1998Methods of test for masonry units — Part 2:

Determination of percentage area of voids inmasonry units (by paper indentation)

砌体砌筑单元的试验方法—第2 部

分：集料混凝土砌体砌筑单元的孔隙面积百分比的测定（通过纸压痕法）

91.100.20

BS EN 772-5:2001Methods of test for masonry units —Part 5:

Determination of the active soluble saltscontent of clay masonry units

砌体砌筑单元的试验方法第五部分：

确定砌体砌筑单元活性可溶解盐的含量

91.080.30

BS EN 772-7:1998

Methods of test for masonry units -Part 7:

Determination of water absorption of claymasonry damp proof course units by boiling inwater

砌体砌筑单元的试验方法第七部分：

通过水煮法测定粘土砌体防潮层的吸水性

91.100.20

BS EN 933-1:2012Tests for geometrical properties of aggregates

Part 1: Determination of particle sizedistribution — Sieving method

集料几何特性试验第1部分：确定粒

径分布—筛分方法 91.100.15

BS EN 933-2：1996

Tests for geometrical properties of aggregates

—Part 2: Determination of particle sizedistribution — Test sieves, nominal size ofapertures

集料几何特性试验—第二部分：确定

粒径分布— 试验筛，筛眼公称尺寸91.100.20


Part 3: Determination of particle shape —Flakiness index

集料几何性质的试验第3部分：颗粒

形状的测定 — 片化指数91.100.15


Part 4: Determination of particle shape—Shape index

混凝土、砂浆和水泥浆的外加剂第4

部分：预应力钢筋束用水泥浆的外加剂—定义、要求、合格性、标志及标

91.100.15


EN 欧洲标准

BS EN ISO 10893-10: 2011

Non-destructive testing of steel tubes Part

10: Automated full peripheral ultrasonictesting of seamless and welded (exceptsubmerged arc-welded) steel tubes for thedetection of longitudinal and/or transverseimperfections (ISO 10893-10:2011)

钢管无损检测—第 10 部分: 纵向和/

或横向缺陷检测用无缝和焊接(埋弧焊除外)钢管的自动全外围超声波探伤法

23.040.10; 77.040.20;

77.140.75

BS EN ISO 11666: 2010Non-destructive testing of welds — Ultrasonic

testing— Acceptance levels (ISO 11666:2010)

焊接无损检测—超声波检测—验收等

级25.160.40

BS EN ISO 1461:2009Hot dip galvanized coatings on fabricated iron

and steel articles— Specifications and testmethods (ISO 1461:2009)

装配式钢铁制品的热浸镀锌层——规

范和试验方法25.220.40

BS EN ISO 14713-1:2009

Zinc coatings —Guidelines and recommendations

for the protection against corrosion of ironand steel in structures Part 1: Generalprinciples of design and corrosion resistance(ISO 14713-1:2009)

锌镀层—防止钢铁结构腐蚀的保护指

导和建议第1部分：设计和抗腐蚀性的一般原理

25.220.40; 91.080.10

BS EN ISO 14723:2002Petroleum and natural gas industries —

Pipeline transportation systems — Subsea

石油天然气工业——管线传输系统—

—海底管线阀75.180.99

BS EN ISO 148-1: 2010Metallic materials — Charpy pendulum impact

test Part 1: Test method

金属材料—夏比摆式冲击试验—第1部

分: 试验方法77.040.10

BS EN ISO 148-2: 2008Metallic materials -Charpy pendulum impact

test Part 2: Verification of test machines(ISO 148-2:2008)

金属材料—夏比摆式冲击试验—第2

部分: 试验机的验证77.040.10

BS EN ISO 148-3: 2008

Metallic materials —Charpy pendulum impact

test Part 3: Preparation and characterizationof Charpy V-notch test pieces for indirectverification of pendulum impact machines (ISO148-3:2008)

金属材料—夏比摆式冲击试验—第3部

分：试验机验证用夏比V缺口标准试样77.040.10

BS EN ISO 15607:2003Specification and qualification of welding

procedures for metallic materials — Generalrules

金属材料焊接工艺的规范和评定—通

用准则25.160.10

BS EN ISO 17638: 2009Non-destructive testing of welds — Magnetic

particle testing (ISO 17638:2003)焊接无损检测—磁粉检测 25.160.40


EN 欧洲标准

BS EN ISO 17640: 2010Non-destructive testing of welds — Ultrasonic

testing —Techniques, testing levels, andassessment (ISO 17640:2010)

焊接—超声波检验—技术, 测试电平

的非破坏性试验以及评定25.160.40

BS EN ISO 23277: 2009Non-destructive testing of welds — Penetrant

testing of welds —Acceptance levels (ISO23277:2006)

焊缝无损检测—焊缝渗透检测—验收

等级25.160.40

BS EN ISO 23278: 2009Non-destructive testing of welds — Magnetic

particle testing of welds — Acceptance levels(ISO 23278:2006)

焊缝无损检测—焊缝磁粉检测—验收

等级25.160.40

BS EN ISO 6507-1: 2005Metallic materials — Vickers hardness test

Part 1: Test method

金属材料—维氏硬度试验—第1部分：

试验方法 77.040.10

BS EN ISO 6508-1: 2005Metallic materials — Rockwell hardness test

—Part 1: Test method (scales A, B, C, D, E,F, G, H, K, N, T)

金属材料－洛氏硬度试验第一部

分：试验方法（A、B、C、D、E、F、G、H、K、N、T标尺）

77.040.10

BS EN ISO 6892-1: 2009Metallic materials —Tensile testing Part 1:

Method of test at ambient temperature

金属材料－拉伸试验第1部分：室温

测试方法 77.040.10

BS EN ISO 6892-2: 2011Metallic materials — ensile testin Part 2:

Method of test at elevated temperature (ISO6892-2:2011)

金属材料－拉伸试验第2部分：高温

试验方法77.040.10

BS EN ISO 8492: 2004 Metallic materials — Tube — Flattening test 金属管压扁试验方法 77.040.10

BS 524-1：1997Steel strip sheaths for prestressing tendons

Ð Test methods Part 1. Determination of shapeand dimensions

预应力钢筋用钢带护套—试验方法第1

部分：形状及尺寸的测定77.140.75; 91.080.40

BS EN 10029-2010Hot-rolled steel plates 3 mm thick or above —

Tolerances on dimensions and shape

厚度大于等于3mm 的热轧钢板的尺寸

、外形及允许偏差77.140.50

BS EN 10051-2010Continuously hot-rolled strip and plate/sheet

cut from wide strip of non-alloy and alloysteels — Tolerances on dimensions and shape

连续热轧无涂层非合金和合金钢带

材，厚板和薄板－尺寸和形状公差77.140.50

BS EN 10160:1999Ultrasonic testing of steel flat product of

thickness equal or greater than 6 mm(reflexion method)

厚度≥6mm 钢板的超声波探伤（反射

法）77.040.20 ; 77.140.50

EN 10163-1：2004

Delivery requirements for surface condition of

hot-rolled steel plates, wide flats and

sections —Part 1: General requirements

热轧钢板、宽扁钢和型钢表面状态交

货要求第一部分：一般要求77.140.50


EN 欧洲标准

EN 10163-2：1991Delivery requirements for surface condition of

hot rolled steel plates, wide flats and

sections—Part 2: Plates and wide flats

热轧钢板、宽扁钢和型钢表面状态的

交货要求第2 部分：钢板和宽扁钢?

BS EN 12223: 2000Non-destructive testing - Ultrasonic

examination -Specification for calibration无损检验超声检验 1 号校准块规范 19.100

EN 12390-1:2000

Testing hardened ∞ncrete - Part 1: Shape，

dimensions

and other requirements for test specimens and

moulds

测试硬化混凝土- 第1部分：样品和模

具的形状，尺寸和其他要求91.100.30

EN 6507-1:1997Metallic materials-Vickers hardness test - Part

1:Test method9ISO 6507-1:1997)

金属材料之维氏硬度检测第一部分:

测试工艺77.040.11

EN ISO 148-1: 2010Metallic materials - Charpy pendulum impact

test - Part 1: Test method (ISO 148-1:2009)

金属材料—夏比摆式冲击试验—第1

部分: 试验方法77.040.10

EN ISO 15253: 2000Ophthalmic optics and instruments - Optical

devices for enhancing low vision (ISO15253:2000)

眼科光学和仪器光学助视器 01.004.70

EN ISO 6892-1: 2009Metallic materials - Tensile testing - Part 1:

Method of test at room temperature (ISO 6892-1:2009)

金属材料－拉伸试验第1 部分：室温

测试方法77.040.10

DIN EN 10327

Continuously hot-dip coated strip and sheet of

low carbon steels for cold forming Technical

delivery conditions English version of DIN EN

10327

冷成形用连续热浸镀低碳钢钢板和钢

带——交货技术条件77.140.50

BS EN 779-2012Particulate air filters for general

ventilation —Determination of the filtration

一般通风用气过滤器——过滤性能的

测定91.140.30

EN 1714:2002Non-destructive testing of welds

Ultrasonic testing of welded joints (includesAmendment A1)

焊缝无损检测——焊接接头的超声检

测25.160.40

EN 10060:1999Hot rolled round steel bars

Dimensions and tolerances on shape anddimensions

厚度大于等于6mm钢制扁平材的超声波

检测（反射方法）77.140.60


EN 欧洲标准

EN 14511-1

Air conditioners, liquid chilling packages and

heat pumps with electrically drivencompressors for space heating and cooling -Part 1: Terms and definitions

空调器、液体冷却式整装机及带电动

压缩机用于冷暖空气调节的热泵装置——第一章：术语和定义

01.040.91; 91.140.30

DIN EN 1991-1-2:2002欧洲规范1:结构上的作用—第1—2 部

分：一般作用—对受火结构的作用

DIN EN 1991-1-3:2003Eurocode 1 — Actions on structures — Part 1-

3 : General actions — Snow loads

欧洲规范 1——结构上的作用第 1－

3 部分：一般作用——雪荷载91.010.30 ; 91.080.01

DIN EN 1991-1-4:2005Eurocode 1: Actions on structures — Part 1-4:

General actions — Wind actions

欧洲规范1：结构上的作用—第1-4 部

分：一般作用——风力作用91.080.01

DIN EN 1991-1-5:2003Eurocode 1 : Actions on structures — Part 1-5

: General actions —

欧洲规范1：结构作用—第1-5 部分：

一般作用—热力作用91.010.30 ; 91.080.01

DIN EN 12828:2003Heating systems in buildings Design for water-

based heating systems English version of DINEN 12828

建筑采暖系统专为水暖系统设计 91.140.10

DIN EN 12831:2003Heating systems in buildings Method for

calculation of the design heat load Englishversion of DIN EN 12831

建筑供暖系统设计热负荷的计算方法 91.140.10

DIN EN 12831B1:2008Heating systems in buildings –

Method for calculation of the design heat load–National Annex NA

建筑物供暖系统——基本热负荷计算

方法——国家附录91.140.10

DIN EN 13779:2007

Ventilation for non-residential buildings –

Performance requirements for ventilation androom-conditioning systemsEnglish version of DIN EN 13779:2007-09

非居民楼通风 – 通风和房间空调系

统性能要求91.140.30

DIN EN 14092:2002Space engineering - Space environment; German

version EN 14092:2002空间工程-空间环境 49.14

DIN EN 14336:2005

Heating systems in buildings Installation and

commissioning of water-based heating systems

English version of DIN EN 14336楼内供暖系统水暖系统的安装和调试 91.140.10


EN 欧洲标准

DIN EN 15241:2007

Ventilation for buildings –

Calculation methods for energy losses due toventilation and infiltration in commercialbuildingsEnglish version of DIN EN 15241:2007-09

建筑物的通风设备—由于商业大厦的

通风和渗透性能而导致的能量损失的计算方法

91.140.30

DIN EN 15242:2007


Calculation methods for the determination ofair flow rates in buildings includinginfiltration

建筑通风——确定建筑中包括渗透在

内的空气流速的计算方法91.140.30

DIN EN 15243:2007


Calculation of room temperatures and of loadand energy for buildings with roomconditioning systemsEnglish version of DIN EN 15243:2007-10

建筑物的通风设备—装有室内调节系

统建筑物的室温、负荷和能量计算91.140.30

DIN EN 15255:2007

Energy performance of buildings –Sensible

room cooling load calculation –Generalcriteria and validation procedures Englishversion of DIN EN 15255:2007-11

建筑物的能源绩效—房间显冷负荷计

算—通用标准和确认程序91.140.30

DIN EN 15265:2007

Energy performance of buildings –

Calculation of energy needs for space heatingand cooling using dynamic methods –General criteria and validation proceduresEnglish version of DIN EN 15265:2007-11

建筑物的能量特性-利用动态方法计算

建筑物空间采暖和制冷的能量需求一般标准和确认程序

91.140.99

DIN EN 15450:2007Heating systems in buildings –

Design of heat pump heating systems Englishversion of DIN EN 15450:2007-12

建筑采暖系统专为热泵供暖系统设计 27.080; 91.140.10

DIN EN ISO 13789:2008

Thermal performance of buildings –

Transmission and ventilation heat transfercoefficients –Calculation method (ISO13789:2007)English version of DIN EN ISO 13789:2008-04

建筑物的热力性能——传输和通风热

传递系数——计算方法91.120.10

DIN EN ISO 13790:2008

Energy performance of buildings –

Calculation of energy use for space heatingand cooling (ISO 13790:2008)English version of DIN EN ISO 13790:2008-09

建筑物能源性能—空间加热和空间冷

却的能源使用计算 91.140.10


EN 欧洲标准

DIN EN ISO 13792:2005

Thermal performance of buildings

Calculation of internal temperatures of a roomin summer without mechanical coolingSimplified methods (ISO 13792:2005)English version of DIN EN ISO 13792

建筑物的热特性夏季无机械冷却时房

间内部温度的计算简化计算法91.120.10

DIN EN ISO 15927-1:2004

Hygrothermal performance of buildings –

Calculation and presentation of climatic dataPart 1: Monthly and annual means of singlemeteorological elements (ISO 15927-1 : 2003)English version of DIN EN ISO 15927-1

建筑物的湿热性能 — 气候数据的计

算与描述第一部分：单个气象要素的月平均值和年平均值

91.120.10; 91.120.30

DIN EN ISO 15927-2:2009


Calculation and presentation of climatic data–Part 2: Hourly data for design cooling load(ISO 15927-2:2009) English version of DIN EN

建筑物的湿热性能—气候数据的计算

与描述 —第二部分：设计冷负荷的每小时数据

91.120.01

DIN EN ISO 15927-4:2005

Hygrothermal performance of buildings

Calculation and presentation of climatic dataPart 4: Hourly data for assessing the annualenergy use for heating and cooling (ISO 15927-4:2005)English version of DIN EN ISO 15927-4

建筑物的湿热性能气候数据的计算与

描述第四部分：用于评价加热和制冷过程中能量使用情况的每小时数据

91.120.10; 91.120.30;

91.140.10

DIN EN ISO 15927-5:2005


Calculation and presentation of climatic data

Part 5: Data for design heat load for space

heating (ISO 15927-5:2004)

English version of DIN EN ISO 15927-5

建筑物的温湿性能—气象数据的计算

和表示第五部分：空间供暖热负荷设计数据

07.060; 91.120.10;

91.120.30


EN 欧洲标准

DIN EN ISO 15927-6:2007


Calculation and presentation of climatic data–Part 6: Accumulated temperature differences(degree-days)(ISO 15927-6:2007)English version

建筑物的温湿性能—气象数据的计算

和表示第六部分：累积温差（户外每日平均温度单位）

91.120.10; 91.120.30

DIN EN 1505-1998-eng

Ventilation for buildings I

Sheet metal air ducts and fittings withrectangular Icross section - Dimensions IEnglish version of DIN EN 1505

建筑物的通风长方形截面薄板制通风

管道和异形件——尺寸91.140.30

DIN EN 1506-1998-eng

Ventilation for buildings

Sheet metal air ducts and fittings withcircularcross section - DimensionsEnglish version of DIN EN 1506

建筑物通风圆形截面薄板制通风管道

和配件—尺寸 91.140.30


Part 1: General and performance requirements


分：一般和性能要求01.040.91; 91.140.80

BS EN 12056-4:2000

Gravity drainage systems inside buildings -

Part 4: Wastewater lifting plants Ð Layout and

calculation


分：废水提升设备—设计和计算 91.140.80

BS EN 12056-5:2000

Gravity drainage systems inside buildings -

Part 5: Installation and testing, instructions for

operation, maintenance and use


分：安装、检验、使用说明、维修和使用

91.140.80

DIN EN 12792:2003Ventilation for buildings –Symbols,

terminology and graphical symbols; Germanversion EN 12792:2003

建筑物通风-符号，术语以及图形符号01.040.91; 01.075;

91.140.30


Part 2: Sanitary pipework, layout and

建筑物内部的重力排放系统—第 2 部

分：卫生管道工程—布局和计算91.140.70; 91.140.80


Part 3: Roof drainage, layout and calculation

建筑物内部的重力排放系统—第 3 部

分：屋顶排放—布局和计算91.060.20; 91.140.80


EN 欧洲标准

BS EN 54-1:1996Fire detection and fire alarm systems

Part 1. Introduction

火灾探测和火灾报警系统第1部分：

前言13.220.20

BS EN 54-1:2011Fire detection and fire alarm systems Part 1:

Introduction

火灾探测和火灾报警系统第1部分：

前言13.220.20

BS EN 81-28:2003

Safety rules for the construction and

installation of lifts —Lifts for thetransport of persons and goods —Part 28:Remote alarm on passenger and goods passenger

电梯建造和安装的安全规则—客用电

梯和货用电梯第28部分—客用电梯和货用电梯上的远程警报器

13.320; 91.140.90

BS EN 752:2008 Drain and sewer systems outside buildings 建筑物外部排水和排污系统 93.03

BS EN 1401-1:2009 未找到相应的外文地下无压废水和污水处理的塑料管道

系统—聚氯乙烯(PVC-U)复合管第1部分：管道、管件和系统的规范

BS EN 1443:2003 Chimneys — General requirements 烟囱 — 一般要求 91.060.40

BS EN 1507:2006Ventilation for buildings — Sheet metal air

ducts with rectangular section — Requirementsfor strength and leakage

建筑物通风—矩形截面薄板金属空气

管道—强度和泄漏要求91.140.30

BS EN 1838:2013 Lighting applications —Emergency lighting 照明应用—应急照明 91.160.10

BS EN 12007-1:2012Gas infrastructure — Pipelines for maximum

operating pressure up to and including 16 barPart 1: General functional requirements


的管路—第1部分：一般功能要求75.2

NF EN ISO 14689-1Geotechnical investigation and testing -

Identification and classification of rock -Part 1: Identification and description

地质工学勘测和试验岩石命名及分

类93.020

BS EN 14227-11-2006-中文

版

Hydraulically bound mixtures — Specifications

Part 11: Soil treated by lime

液力粘结混合料.规范.第11部分:石灰

处理的土壤93.080.20

BS EN 14227-5-2013-版）Hydraulically bound mixtures — Specifications

Part 5: Hydraulic road binder bound granularmixtures

液力粘结混合料—规范第5部分：液

力道路粘结粒状混合料（中文 93.080.20

BS EN 12271-2006- Surface dressing —Requirements 表面敷料—要求 93.080.20

BS EN 13863-3-2004-Concrete pavements — Part 3: Test methods for

the determination of the thickness of aconcrete pavement from cores

混凝土路面第3部分：通过岩芯测定混

凝土路面厚度的试验方法93.080.20

BS EN 13924-2006-Bitumen and bituminous binders. Specifications

for hard paving grade bitumens

沥青和沥青粘合剂—硬质路面等级沥

青规范（中文版）93.080.20


EN 欧洲标准

BS EN 14227-1-2013-Hydraulically bound mixtures — Specifications

Part 1: Cement bound granular mixtures

液力粘结混合料—规范第1部分：水

泥粘结粒状混合料（中文版） 93.080.20

BS EN 14227-10-2006-Hydraulically bound mixtures — Specifications

Part 10: Soil treated by cement

液力粘结混合料—规范第10部分：水

泥改性土（中文版）93.080.20

BS EN 12063-1999Execution of special geotechnical work- Sheet-

pile walls特殊土建工程工作的实施.薄板桩墙 93.080.20

BS EN12699-2001Execution of special geotechnical work -

Displacement piles特殊岩土工程施工-挤土桩 93.020

BS EN 12715-2000Execution of special geotechnical work -

Grouting特殊土工工程的处理灰浆 93.020

BS EN 12716-2001Execution of special geotechnical works — Jet

grouting 特殊土工工程的施工-高压喷射注浆 93.02

BS EN 12794-2005 Precast concrete products - Foundation piles 预浇铸混凝土产品.基桩 91.100.30; 93.020

BS EN 13251 - 2012

Geotextiles and geotextile-related products -

Characteristics required for use in earthworks,

foundations and retaining structures

土工织物及其相关产品-用于土方施工

、地基和挡土结构的特性要求 59.080.70

BS EN 14199 2005 中文Execution of special geotechnical works —

Micropiles特殊土工工程的实施小型桩 93.020

BS EN 14475-2006（中文

版）

Execution of special geotechnical works —

Reinforced fill特种土工作业的施工.加固灌浆 93.020

BS EN 14653-1-2005-中文版Manually operated hydraulic shoring systems

for groundwork support —Part 1: Productspecifications

地面工程支撑用人工操纵液压支撑系

统— 第 1 部分：产品规范93.020

BS EN 14653-2-2005-中文版Manually operated hydraulic shoring systems

for groundwork support — Part 2: Assessmentby calculation or test

土方工程支撑用手动液压支撑系统.第

2部分:通过计算或试验评定93.020

BS EN14679：2005（中文

版）

Execution of special geotechnical works —

Deep mixing特殊土工工程的执行.深度混合 93.020

BS EN14731：2005（中文

版）

Execution of special geotechnical works

Ground treatlllent by deep vibration

特殊土工工程的施工.深层振动地面处

理93.020

BS EN 15237-2007中文Execution of special geotechnical works —

Vertical drainage特殊土方工程的执行.垂直排水 93.020

BS EN 1536-2000中文Execution of special geotechnical work - Bored

piles特殊土工工作的执行.螺旋钻孔桩 93.020


EN 欧洲标准

BS EN 1537-2000中文Execution of special geotechnical work -

Ground anchors特殊土工工程的执行.地锚 93.020

BS EN 1538-2000-中文版Execution of special geotechnical works -

Diaphragm walls 特殊土工工程的执行.隔离墙壁 93.020

BS EN ISO 14688-1-2002中

文

Geotechnical investigation and testing 一

Identification and classification of soil 一- Part

1: Identification and description

土工工程土壤的识别与分类第1部分：

识别与描述93.020

BS EN ISO 14689-1-2003中

文

Geotechnical investigation and testing —

Identification and classification of rock —Part 1: Identification and description

土工技术研究和试验.岩石鉴定和分

类.第1部分:鉴定和表现93.020

BS EN ISO 22475-1-2007 中

文


Sampling methods and groundwater measurements—

土工勘察与试验-取样方法和地下水测

量--第1部分：执行技术原理93.020

BS EN ISO 22476-2：

2005(R2006)（中文版）


Field testing——Part 2:Dynamic probing

土工勘察和试验-现场试验—第2 部

分：动力探测93.020

BS EN ISO 22476-3：

2005(R2006)


Field testing——Part 3:Standard penetration

岩土勘察和试验-场地试验-第3部分：

标准贯入试验（中文版）93.020

BS EN ISO 11298-1-2011-中

文版

Plastics piping systems for renovation of

underground water supply networks Part 1:General (ISO 11298-1:2010)

地下供水网络修复用塑料管道系统第

1 部分：总则

23.040.20; 23.040.45;

93.025

BS EN ISO 11298-3-2011-中

文版


underground water supply networks Part 3:Lining with close-fit pipes (ISO 11298-3:2010)

地下供水网络修复用塑料管道系统第

3部分：带紧配合管道的衬里（中文版）

23.040.20; 23.040.45;

93.025

BS EN 14801-2006-中文版Conditions for pressure classification of

products for water and wastewater pipelines

水和废水管路用产品的压力分类条件

（中文版）93.025; 93.030

BS EN 14802-2006-中文版

Plastics piping systems — Thermoplastics

shafts or risers for inspection chambers andmanholes — Determination of resistanceagainst surface and traffic loading

塑料管道系统—检验井和检修孔用热

塑性塑料井筒或竖管—耐路表面和交通载荷的测定（中文版）

93.025; 93.030

BS EN 14830-2006-中文版Thermoplastics inspection chamber and manhole

bases — Test methods for buckling resistance

热塑性检查井和人孔底座.压曲抗力试

验方法93.025; 93.030

BS-EN-1091-1997（中文版）无原文建筑物外真空排水系统


EN 欧洲标准

BS EN 1123-1-1999-中文版

Pipes and fittings of longitudinally welded hot-

dip galvanized steel pipes with spigot and

socket for waste water systems —Part 1:

Requirements, testing, quality control

污水系统用插接管的纵向焊接热浸镀

锌钢管及配件.要求、试验和质量控制

77.140.75; 91.140.80;

93.030

BS-EN-12666-1-2005（中文

版）

Plastics piping systems for non-pressure

underground drainage and sewerage —

Polyethylene (PE) — Part 1: Specifications for

pipes, fittings and the system

无压力地下排水和排污塑料管道系统.

聚乙烯(PE).第1部分:管、管件和系统用规范

23.040.01; 91.140.80;

93.030

BS-EN-12889-2000-中文版Trenchless construction and testing of drains

and sewers排水管和污水管的非挖沟构建和试验 93.030;

BS EN 1293-1999 中文General requirements for components used in

pneumatically pressurized discharge pipes,drains and sewers

用于气动加压排放管、排水沟和污水

管组成件的一般要求

23.040.01; 91.140.80;

93.030

BS-EN-13380-2001 中文General requirements for components used for

renovation and repair of drain and sewersystems outside buildings

建筑物外排水和排污系统改善和修理

用组件的一般要求93.03

BS EN 13101-2002 中文Steps for underground man entry chambers —

Requirements, marking, testing and evaluationof conformity

供人员通行的地下检查井用踏步-合

格性的要求、标记、试验和评定97.145

BS EN13244-2-2002

Plastics piping systems for buried and

above-ground pressure systems for water forgeneral purposes, drainage and sewerage —Polyethylene (PE) —Part 2: Pipes

一般用途、排水和排污水的地下或地

面压力系统用塑料管道系统-聚乙烯（PE）。第二部分：管道（中文版）

23.040.20; 93.030

BS EN13244-3-2002


above-ground pressure systems for water for

general purposes, drainage and sewerage —

Polyethylene (PE) —Part 3: Fittings

一般用水、排水排污的地下及地面压

力系统用塑料管道系统-聚乙烯（PE）。第3部分：配件（中文版）

23.040.45; 93.030

BS EN 13244-4-2002（中文

版）


above-ground pressure systems for water for

general purposes, drainage and sewerage —

Polyethylene (PE) —Part 4: Valves

一般用途、排水和排污水的地下或地

面压力系统用塑料管道系统聚乙烯第4部分阀门

23.060.01; 93.030


EN 欧洲标准

BS EN 13508-1-2012-中文版nvestigation and assessment of drain and sewer

systems outside buildings Part 1: GeneralRequirements

建筑物外的排水和污水处理系统的调

查和评估一般要求93.030

BS EN 13508-1-2003 中文Condition of drain and sewer systems outside

buildings — Part 1: General requirements

建筑物外部排水和污水管道系统条件-

第1部分：一般要求93.030

BS EN 13508-2-2003+A1-

2011-中文版

Condition of drain and sewer systems outside

buildings — Part 2: Visual inspection codingsystem

建筑物外部排水和排污系统调查和评

估-第2 部分：目视检查编码系统93.030

BS EN 13566-1-2003 中文


undergroundnon-pressure drainage and sewerage networks—Part 1: General

地下无压排污网改善用塑料管道系统-

第1部分：总则 93.030

BS EN13566-2-2005 中文


undergroundnon-pressure drainage and sewerage networks —Part 2: Lining with continuous pipes

对地下无压排水系统和污水网进行改

造的塑料管道系统--第2部分：连续管道的衬垫

93.030

BS EN ISO 11296-3-2011-中

文版


undergroundnon-pressure drainage and sewerage networksPart 3: Lining with close-fit pipes(ISO 11296-3:2009/Cor 1:2011)

地下无压力排水管和下水道网络修23.040.20; 23.040.45;

91.140.80; 93.030

BS EN ISO 11296-4-2011-中

文版


underground

non-pressure drainage and sewerage networks

Part 4: Lining with cured-in-place pipes (ISO

11296-4:2009, corrected version 2010-06-01)

地下无压力排水管和下水道网络修23.040.20; 23.040.45;

91.140.80; 93.030

BS EN ISO 11296-7-2013-中

文版


underground

non-pressure drainage and sewerage networks

Part 7: Lining with spirally-wound pipes (ISO

11296-7:2011)

地下无压力排水管和下水道网络修复

用塑料管道系统第7部分：带螺旋缠绕管道的内衬（中文版）

23.040.20; 23.040.45;

23.040.99


EN 欧洲标准

BS EN 13598-1-2003


underground drainage and sewerage —Unplasticized poly(vinyl chloride) (PVC-U),polypropylene (PP) and polyethylene (PE) —Part 1: Specifications for ancillary fittingsincluding shallow inspection chambers

无压力地下排水和排污用塑料管道系

统-未增塑聚氯乙烯(PVC-U)，聚丙烯（PP）和聚乙烯（PE）。第1部分：包括浅层检查井在内的辅助配件规范（中文版）

ISBN 0 580 42861 3

BS EN 13598-2-2009

Plastics piping systems for non- pressure

underground drainage and sewerageUnplasticized poly(vinyl chloride) (PVC-U),polypropylene (PP) and polyethylene (PE)Part 2: Specifications for manholes andinspection chambers in traffic areas and deepunderground installations

用于无压地下排水和排污的塑料管道

系统-未增塑聚氯乙烯（氯化乙烯）（硬聚氯乙烯）、聚丙烯（PP）和聚乙烯（PE）。第2部分：交通区域内的检查孔和检查井以及地下深处设施的规范。（中文版）

93.030

BS EN 1401-1-2009（中文

版）

Plastic piping systems for non-pressure

underground drainage and sewerage—

Unplasticized poly(vinyl chloride) (PVC-U)

Part 1: Specifications for pipes, fittings and the

地下无压力排水和排污用塑料管道系

统.未增塑聚乙烯(氯乙烯)(PVC-U).管道,配件和系统规范

23.040.20; 93.030

BS EN 14364-2013-中文版

Plastics piping systems for drainage and

sewerage with or without pressure — Glass-reinforced thermosetting plastics (GRP) basedon unsaturated polyester resin(UP) — Specifications for pipes, fittings andjoints

有压或无压排水和排污用塑料管道系

统—基于不饱和聚酯树脂(UP)的玻璃增强热固性塑料(GRP)—管道、管配件和接头规范（中文版）

93.030

BS EN 14396-2004（中文

版）Fixed ladders for manholes 人孔用固定梯子 97.145

BS EN 14457-2004-中文版General requirements for components

specifically designed for use in trenchlessconstruction of drains and sewers

专门为无槽排水和排污结构所设计的

构件的一般要求?

BS EN 14636-1-2009-中文版

Plastics piping systen1s

for non-pressuredrainage and sewerage — Polyester resinconcrete (PRC)Part 1: Pipes and fittings with flexible

非压力型排水和排污塑料管系统.聚酯

树脂混凝土(PRC).带挠性接头的管道和配件

23.o4o.5o; 93_030


EN 欧洲标准

BS EN 14636-2-2009-中文版


drainage and sewerage— Polyester resinconcrete (PRC)Part 2: Manholes and inspection chambers

无压排水和排污塑料管道系统.聚酯树

脂混凝土 (PRC).检修孔和检查室 23.040.20; 93.030

BS EN 14654-1-2005-中文版Management and control of cleaning

operations in drains and sewers —Part 1:

排水沟和下水道清洁工作的管理和控

制.第1部分:下水道清洁.93.030

BS EN 14758-1-2005+A1-

2009-中文版


underground drainage and sewerage —Polypropylene with mineral modifiers (PP-MD)— Part 1: Specifications for pipes, fittingsand the system

无压力地下排水和排污用塑料管道系统 - 含矿物调节剂的聚丙烯

（PP-MD） - 第1部分：管道配件

及系统规范

93.030

BS EN 14982-2006+A1-2010-

中文版

Plastics piping and ducting systems —

Thermoplastics shafts or risers for inspectionchambers and manholes — Determination of ringstiffness

塑料管和管道系统—检查井和检修孔

用热塑性塑料井筒或提升器—环刚度测定

93.030

BS EN 1610-1998 中文 Construction and testing of drains and sewers 排水管和下水道的铺设与测试 13.060.30 ; 91.140.80

BS EN 1671-1997 中文 Pressure sewerage systems outside buildings 建筑物外部带压排污系统 13.060.30

BS EN 1852-1-2009中文


underground drainage and sewerage—Polypropylene (PP)Part 1: Specifications for pipes, fittings andthe system

地下非承压排水和排污用塑料管道系

统 —聚丙烯（PP）第1部分：管道、配件及该系统的规范（PP）

23.040.01; 23.040.20;

93.030

BS EN 1916-2002-中文版Concrete pipes and fittings, unreinforced,

steel fibre and reinforced无钢筋和钢筋混凝土管和管配件 23.040.50; 93.030

BS EN 1917-2002-中文版Concrete manholes and inspection chambers,

unreinforced, steel fibre and reinforced

无钢筋和带钢筋的混凝土检修孔和检

查井 93.030

BS EN 295-1-1991 中文Vitrified clay pipes and fittings and pipe

joints for drains and sewers —Part 1:Requirements

排水和排污用陶管、管配件及管接头-

第1部分：要求91.140.80

BS EN 295-2-1991（中文

版）

Vitrified clay pipes and fittings and pipe

joints for drains and sewers —Part 2: Qualitycontrol and sampling

排水管和下水道用陶管和管配件及管

接头.质量控制和抽样ISBN 0 580 20270 4

BS EN 295-3-2012-中文版Vitrified clay pipe systems for drains and

sewersPart 3: Test methods

用于污水排放的陶土管系统.试验方法 23.040.50; 91.140.80;

93.030


EN 欧洲标准

BS EN 295-4 2013-中文版

Vitrified clay pipe systems for drains and

sewersPart 4: Requirements for adaptors, connectorsand flexible couplings

排水管和污水管用的陶土管和配件及

管接头--第4部分:专用配件、转换接头和可互换附件的要求

23.040.50; 91.140.80;

93.030

BS EN 295-5-2013-中文版

Vitrified clay pipe systems for drains and

sewersPart 5: Requirements for perforated pipes andfittings

污水管道用陶土管.异型件及管连接

件.第5部分:多孔陶土管和管配件的要求

23.040.50; 91.140.80;

93.030

BS EN 295-6-1996 中文Vitrified clay pipes and fittings and pipe

joints for drains and sewers —Part 6:Requirements for vitrified clay manholes

排水和排污用陶制管、配件和管接头-

-第6部分：陶土人孔的要求

23.040.50; 91.140.80;

93.030

BS EN 295-7-2013（中文

版）

Vitrified clay pipes and fittings and pipe

joints for drains and sewers —Part 7:Requirements for vitrified clay pipes andjoints for pipe jacking

排水及污水用陶土管道、配件和管接

头.第7部分:管接头的要求23.040.30; 23.040.50

BS EN 476-2011-中文版General requirements for components used in

discharge pipes, drains and sewers for gravitysystems

排水管和下水道用零部件的一般要求 91.140.80

BS EN 588-1-1997-中文版Fibre-cement pipes for sewers and drains

Part 1. Pipes, joints and fittings for gravitysystems

下水管和排水道用纤维水泥管.第1部

分:重力管路系统用管道、管连接件和管配件

91.040.80

BS EN 588-2-2001-中文版Fibre cement pipes for drains and sewers —

Part 2: Manholes and inspection chambers

排水管和下水道用纤维水泥管— 第2

部分：检修孔和检查井（中文版）13.060.30; 93.030

BS EN 598：2007+A12009

（中文版）

Ductile iron pipes, fittings, accessories and

their joints for sewerage applications -Requirements and test methods

排污用球墨铸铁管道、管件、附件及

其接头 — 要求和试验方法23.040.1 O; 23.040.40

BS EN 752-2008（中文版） Drain and sewer systems outside buildings 建筑物外部排水和污水系统 93.030

BS EN 773-1999-中文版General requirements for components used in

hydraulically pressurized discharge pipes,drains and sewers

在液压排气管,水管和下水道中使用部

件的一般要求

23.040.01; 91.140.80;

93.030

BS EN 1090-2-2008+A1-

2011-中文版

Executionofsteel structures and aluminium

structuresPart2:Technical requirements for steelstructures

钢结构和铝结构的施工第二部分：钢

结构的技术要求 91.040.01, 91.080.10


EN 欧洲标准9.NF EN 10204-2005(NF A

00-001-2005)

Metallic products — Types of inspection

documents金属产品检验文件的类型 77.140.01

BS EN 15050-2007 Precast concrete products — Bridge elements 预制混凝土产品--桥梁元件 91.100.30; 93.040

BS EN 13036-6-2008-中文版

Road and airfield

surface characteristics — Test methods —Part 6: Measurement of transverse andlongitudinal profiles in the evenness andmegatexture wavelength ranges

道路和机场表面特性.试验方法.第6部

分:在平坦和巨大表面(megatexture)波长范围内测量横向和纵向轮廓

93.080.10; 93.120

BS EN 13036-8-2008-中文版Road and airfield surface characteristics —

Test methods —Part 8: Determination oftransverse unevenness indices

道路和机场表面特性.试验方法.横向

不匀指数的测定93.080.10; 93.120

EN 500-1-中文Mobile road construction machinery — Safety

— Part 1 : Common requirements

公路建造用移动机械安全性第一部

分：通用要求91.220

EN 500-2-中文Mobile road construction machinery — Safety

— Part 2 : Specific requirements for road-milling machines

用于公路建设的可移动机械安全性第

2 部分：路面铣削机械的特殊要求91.220

BS EN 500-6-2006 中文Mobile road construction machinery — Safety

—Part 6: Specific requirements for paver-

移动式道路施工机械--安全--第六部

分：摊铺机的特殊要求91.220

BS EN 12274-1-2002 中文Slurry surfacing — Test methods —

Part 1: Sampling for binder extraction

泥浆封层-试验方法-第1部分：粘合

剂萃取抽样法93.080.20

EN 12274-3-2003(NF P98-

857-3-2003)

Slurry surfacing — Test methods — Part 3:

Consistency

冷铺沥青材料试验方法第三部分：

坚固性。

75.140 ; 93.080.20

EN 12274-4-2003(NF P98-

857-4-2003)

Slurry surfacing — Test methods — Part 4:

Determination of cohesion of the mix

冷铺沥青材料试验方法第四部分：

测定混合物粘结力。

75.140 ; 93.080.20

BS EN 12591-2009Bitumen and bituminous binders—

Specifications for paving grade bitumens

沥青和沥青粘合剂--铺路级沥青规范

（中文版）91.100.50; 93.080.20

BS-EN-12697-11-2005 中文Bituminous mixtures Test methods for hot mix

asphalt -Part 11: Determination of theaffinity between aggregate and bitumen

沥青混合料--热拌沥青的试验方法。

第11部分：骨料和沥青间亲合力的测定。

93.080.20

BS EN 12697-12-2008 中文

Bituminous mixtures —Test methods for hot mix

asphalt Part 12: Determination of the water

sensitivity of bituminous specimens

沥青混合物--热拌沥青混合料的试验

方法。第12部分：沥青样品水敏性的测定

93.080.20


EN 欧洲标准

BS EN 12697-13-2000 中文Bituminous mixtures Test methods for hot mix

asphaltPart 13: Temperature m.easurement

沥青混合料--热拌沥青混合料的试验

方法。第1部分：温度测量91.100.50; 93.080.20


asphalt —Part 14: Water content


方法。第14部分：含水量。OJ.I00.50; 93.080.20

BS EN 12697-15-2003 中文

Bituminous mixtures

Test methods for hot mix asphalt —Part 15: Determination of the segregationsensitivity


方法。第15部分：离析敏感性的测定93.080.20


asphalt —Part 16: Abrasion by studded tyres

沥青混合料。热拌沥青混合料的试验

方法。第16部分：防滑钉胎造成的磨93.080.20


asphalt -Part 17: Particle loss of porousasphalt specimen


方法。第17部分：多孔沥青试样的粒料损失

93.080.20


asphaltPart 18: Binder drainage


方法。第18部分：铺路沥青排水93.080.20


asphaltPart 19: Permeability of specimen


方法。第19部分：试样的渗透率93.080.20

BS EN 12697-2-2002 中文

Bituminous mixtures Test methods for hot

mix asphalt —Part 2: Determination of particle sizedistribution


方法。第2部分：粒度分布的测定93.080.20

BS EN 12697-21-2003 中文Bituminous mixtures

Test methods for hot mix asphaltPart 21: Indentation using plate specimens

沥青混合物。热拌沥青混合料的测试

方法。第21部分：板试件的压痕93.080.20

BS EN 12697-22-2004 中文Bituminous mixtures — Test methods for hot

mix asphalt —Part 22: Wheel tracking

沥青混合料。热拌沥青试验方法--第

22部分：车辙93.080.20


mix asphalt —Part 24: Resistance to fatigue

沥青混合料。热拌沥青的试验方法--

第24部分：抗疲劳性

75.140 ; 93.080.20


mix asphalt —Part 25: Cyclic compression test

沥青混合料。热拌沥青的试验方法--

第25部分：循环压力试验93.080.20


mix asphalt —Part 26: Stiffness

沥青混合料。热拌沥青试验方法。第

26部分：劲度93.080.20


EN 欧洲标准

BS EN 12697-27-2001 中文Bituminous mixtures - Test methods for hot mix

asphalt -Part 27: Sampling

沥青混合料。热拌沥青试验方法。第

27部分：取样93.080.20

BS-EN-12697-28 中文

Bituminous mixtures -

Test methods for hotmix asphalt -Part 28: Preparation of samples fordetermining binder content, water content and


方法--第15部分：测定粘合剂含量、含水量和级配用样品的制备

93.080.20


mix asphalt —Part 29: Determination of thedimensions of a bituminous specime


方法。第29部分：沥青样品尺寸的测定

93.080; 93.080.20

BS EN 12697-3 中文Bituminous mixtures Test methods for hot

mix asphalt —Part 3: Bitumen recovery: Rotaryevaporator


方法。第3部分：沥青回收：旋转蒸发仪

93.080.20

BS EN 12697-30 中文

Bituminous mixtures Test methods for hot mix

asphaltPart 30: Specimen preparation by impactcompactor


方法。第30部分：用冲击压实机制备样品

93.080.20


mix asphalt — Part 31: Specimen preparationby gyratory compactor

沥青混合料-热拌沥青试验方法-第31

部分：旋转式压实机的试样制备3.080.20

BS EN 13043-2002 中文Aggregates for bituminous mixtures and surface

treatments for roads, airfields and othertrafficked areas

道路、机场和其他交通区域用沥青混

合料和路面处理的集料。91.100.15;93.080.20

BS-EN-13108-1-2006（中文

版）

Bituminous mixtures —Material specifications

—沥青混合物.材料规范.沥青混凝土 93.080.20

BS EN 13108-20-2006 中文Bituminous mixtures — Material

specifications —Part 20: Type Testing

沥青混合料-材料规范-第20部分：型

式试验93.080.20

BS EN 13108-21 中文Bituminous mixtures Material specifications —

Part 21: Factory Production Control

沥青混合料-材料规范。第21部分：工

厂生产控制93.080.20


specifications —Part 3: Soft Asphalt

沥青混合料-材料规格。第3部分：软

沥青 93.080.20

BS-EN-13108-4 中文Bituminous mixtures -Material specifications

一 Part 4:Hot Rolled Asph alt沥青混合料-材料规格。第4部分：热

轧沥青 93.080.20


EN 欧洲标准

BS-EN-13108-5 中文Bituminous mixtures -Material specifications

一 Part 5: Stone Mastic Asphalt沥青混合料-材料规格。第5部分：沥

青玛蹄脂碎石混合料 93.080.20


specifications —Part 7: Porous Asphalt

沥青混合物。材料规范第7部分：多

孔沥青。 93.080.20

BS EN 13285-2010（中文

版）Unbound mixtures —Specifications 松散混合料—规范 93.080.20

BS-EN-13286-1 中文

Unbound and hydraulically bound mixtures

Part 1: Test methods for laboratoryreference density and water content -

Introduction，general requirements and

松散混合料和液压粘结混合料。第1部

分：实验室基准密度和含水量的试验方式-介绍、一般要求和取样

93.080.20

BS EN 13286-2 中文


Part 2: Test methods for the determination ofthe laboratory reference density and watercontent - Proctor compaction

松散的和液力粘结的混合料。第二部

分：测定实验室参考密度与含水量的试验方法-普氏压实试验

93.080.20

BS-EN-13286-3-2003 中文

Unbound and hydraulically bound mixtures 一Part 3: Test methods for laboratory reference

density and water content - Vibrocompression

with controlled parameters

松散的和液压粘合的混合料。第3部

分：实验室参考密度和含水量测试方法-有控制参数的振动压缩

93.080.20

BS EN 13286-4 中文Unbound and hydraulically bound mixtures

Part 4: Test methods for laboratory referencedensity and water content - Vibrating hammer

松散混合料与液力粘结混合料。第4部

分：实验室参考密度和含水量的试验方法-振动锤

93.080.20

BS EN 13286-40 中文

Unbound and hydraulically bound mixtures 一Part 40: Test method for determination of the

direct tensile strength of hydraulically bound

mixtures

松散混合料与液力粘结混合料。第40

部分：测定液力粘结混合料直接抗拉强度的测试方法

93.080.20

BS EN 13286-41 中文


Part 41: Test method for determination of thecompressive strength of hydraulically boundmixtures


部分：测定液力粘结混合料抗压强度的测试方法

93.080.20

BS EN 13286-42-2003 中文

Unbound and hydraulically bound mixtures 一Part 42: Test method for the determination of

the indirect tensile strength of hydraulically

bound mixtures


部分：测定液力粘结混合料劈裂抗拉强度的测试方法

93.080.20


EN 欧洲标准

BS EN 13286-43-2003 中文

Unbound and hydraulically bound mixtures 一Part 43: Test method for the determÎnation of

the modulus of elasticity of hydraulically bound


部分：测定液力粘结混合料弹性模数的测试方法

93.080.20

BS-EN-13286-44 中文


Part 44: Test method for the determÎnation ofthe alpha coefficient of vitrified blastfurnace slag


部分：测定玻化高炉矿渣a系数的试验方法

93.080.20

BS EN 13286-45 中文

Unbound and hydraulically bound mixtures 一Part 45: Test method for the determination

ofthe workability period of hydraulically bound


部分：测定液力粘结混合料施工性能周期的试验方法

93.080.20


Part 46: Test method for the determination ofthe moisture condition value


部分：测定含水量值的试验方法93.080.20

BS EN 13286-47-2004 中文


Part 47: Test method for the determination of

California bearing ratio，immediate bearing

index and

linear swelling


部分：测定加州承载比、瞬时承载力指数和线性膨胀的试验方法

93.080.20


Part 48: Test method for the determination ofdegree of pulverization


部分：测定粉碎程度的测试方法 93.080.20

BS EN 13286-49-2004 中文


Part 49: Accelerated swelling test for soiltreated by lime and/or hydraulic binder


部分：在经过石灰和或水硬性粘结料处理的土壤上进行加速膨胀试验

93.080.20

BS-EN-13286-50 中文

Unbound and hydraulically bound mixtures 一Part 50: Method for the manufacture of test

specimens of hydraulically bound mixtures

using Proctor equipment or vibrating table


部分：利用普氏设备或振动台压实制作液力粘结混合料试样的方法

93.080.20

BS EN 13286-51-2004 中文


Part 51: Method for the manufacture of testspecimens of hydraulically bound mixturesusing vibrating hammer compaction


部分：利用振动锤压实制造液力粘结混合料试样的方法

93.080.20


EN 欧洲标准

BS-EN-13286-52 中文


Part 52: Method for the manufacture of testspecimens of hydraulically bound mixturesusing vibrocompression


部分：利用振动压缩制作液力粘结混合料试样的方法

93.080.20

BS EN 13286-53 中文

Unbound and hydraulically bound mixtures 一Part 53: Methods for the manufacture of test

specimens of hydraulically bound mixtures

using axial compression


部分：利用轴向挤压制造液力粘结混合料试样的方法

93.080.20


Part 7: Cyclic load triaxial test for unboundmixtures

松散混合料与液力粘结混合料。第7部

分：松散混合料的循环荷载三轴试验 93.080.20

BS EN 1338-2003 中文Concrete paving blocks — Requirements and

test methods混凝土铺面砖.要求和试验方法 93.080.20

BS EN 1339 中文

Concrete pavlng flags -Requirements and test

methods 混凝土铺路石板。要求和试验方法 93.080.20

BS-EN-1340-2003 中文Concrete kerb units - Requirements and test

methods混凝土路缘石块--要求和试验方法 93.080.20

BS EN 1341-2001 中文Slabs of natural stone for external paving -

Requirements and test methods室外铺设用天然石板-要求与测试方法 90.080.20

BS EN 1343-2001 中文Kerbs of natural stone for external paving -

Requirements and test methods

室外铺路设用天然路缘石-要求和测试

方法 93.080.20

BS EN 1344-2002（中文版） Clay pavers Requirements and test methods 粘土铺设要求和试验方法 93.080.20

BS-EN-13588-2008 中文Bitumen and bituminous binders - Determination

of cohesion of bituminous binders withpendulum test

沥青和沥青粘结剂--用摆锤试验测定

沥青粘合剂的黏聚力

75.140; 91.100.60;

93.080.20

BS EN 13596-2004 中文

Flexible sheets for waterproofing —

Waterproofing of concrete bridge decks andother concrete surfaces trafficable byvehicles — Determination of bond strength

防水柔性板-混凝土桥面与其它可通车

混凝土表面的防水-粘结强度的测定91.100.50; 93.080.20

BS EN 13863-1 中文

Concrete pavements

Part 1: Test method for the determination ofthe thickness of a concrete pavement by surveymethod

混凝土路面。第1部分：用测量法测定

混凝土路面厚度的试验方法 93.080.20


EN 欧洲标准

BS-EN-13863-2-2003 中文Concrete pavements

Part 2: Test method for the determination ofthe bond between two layers

混凝土路面。第2部分：测定两层间粘

结性的试验方法93.080.20

BS EN 13877-1-2013（中文

版）Concrete pavements Part 1: Materials 混凝土铺面.第1部分:材料. 93.080.20

BS EN 13877-2-2004-中文Concrete pavements —Part 2: Functional

requirements for concrete pavements

混凝土路面。第2部分：混凝土路面的

功能要求。93.080.20

BS EN 13877-3-2004（中

文）

Concrete pavements —Part 3: Specifications

for dowels to be used in concrete pavements

混凝土路面—第3部分：混凝土路面

用传力杆规范 93.080.20

BS EN 14023-2010 中文Bitumen and bituminous binders— Specification

framework for polymer modified bitumens

沥青和沥青粘合剂--聚合改性沥青的

规范框架93.080.20

BS EN 14188-1-2004 中文Joint fillers and sealants — Part 1:

Specifications for hot applied sealants

填缝料和密封胶。第1部分：热敷式用

密封胶规范 93.080.20

BS EN 14188-4-2009 中文Joint fillers and sealants Part 4:

Specifications for primers to be used withjoint sealants

接缝填料和密封胶。第4部分：与接

合密封使用的处理剂规格93.080.20

BS EN 1423 中文

Road marking materials Drop on materials -

Glass beads，antiskid aggregates and mixtures

of the two

道路标记材料。标记滴落剂--玻璃珠

、防滑骨料以及两者混合物93.080.20

BS EN 1424-1998 中文 Road marking materials-Premix glass beads 道路标记用材--预混玻璃珠 93.080.20

332：EN 1463-1-中文

Road marking materials - Retroreflecting road

studs 一Part 1 : Initial performance requirements

路面标志产品后向反射反光路钮第1

部分：初始性能规定

93.080.30

BS EN 1463-2-2000 中文Road marking materials - Retroreflecting road

studs -Part 2: Road test performance specifications

道路标记材料-反光道路钉-第2部分：

道路试验性能规范93.080.20

BS EN 15381-2008 中文Geotextiles and geotextile-related products —

Characteristics required for use in pavementsand asphalt overlays

土工织物和土工织物相关产品-路面和

沥青铺设层要求的使用特性59.080.70; 93.080.20

BS EN 15466-1-2009 中文Primers for cold and hot applied joint

sealants Part 1: Determination of homogeneity冷和热对接密封剂底漆。第1部分：同

质性的测定93.080.20

BS EN 15466-2-2009 中文

Primers for cold and hot applied joint

sealants Part 2: Determination of resistance

against alkali

冷和热对接密封剂。底漆第2部分：

耐碱性测定93.080.20


EN 欧洲标准

BS EN 15466-3-2009 中文Primers for cold and hot applied joint

sealants Part 3: Determination of solidscontent and evaporation behaviour of volatiles

冷和热应用的对接密封剂底漆。第3部

分：固体含量和挥发物挥发性能的测定

93.080.20

BS EN 15626-2009 中文

Bitumen and bituminous binders— Determination

of adhesivity of cut-back and fluxedbituminous binders by water immersion test —Aggregate method

沥青和沥青粘合剂--用水浸试验测定

稀释和助溶沥青粘合剂的粘合性--集料法

93.080.20

EN 1790-中文Road marking materials — Preformed road

markings路面标线产品——预制路面标线 93.080.30

BS EN 1871-2000 中文 Road marking materials- Physical properties 道路标记材料--物理性能 93.080.20BS EN 50556-2011（中文

版）Road traffic signal systems 道路交通信号系统 93.080.30

BS EN 12368-2006 中文 Traffic control equipment — Signal heads 交通控制设备--信号器 93.080.30

BS EN 124-1994（中文版）

Gully tops and manhole tops for vehicular and

pedestrian areas 一Design requireInents，type

testing，Inarking，quality control

车辆和行人通过区域的排水沟盖和人

孔盖.设计要求、型号试验、标志

UDC 628.253.1:00

1.4:620.1

BS EN 12414-1999-中文版Vehicle parking control equipment - Pay and

display ticket machine - Technical andfunctional requirements

车辆停泊控制设备.付款和出票机器.

技术和功能要求39.040.99; 93.080.30

BS EN 12676-1-2000 中文Anti-glare systems for roads —Part 1:

Performance and characteristics

道路用防眩系统。第1部分：性能和特

性93.080.30

BS EN 12676-2-2000 中文Anti-glare systems for roads - Part 2: Test

methods道路防眩系统--第2部分：试验方法 93.080.30

BS EN 12767-2007-中文版Passive safety of support structures for road

equipment — Requirements, classification andtest methods

公路设备支承结构的被动安全性要

求、分类和试验方法93.080.30

BS EN 12899-1-2007 中文Fixed, vertical road traffic signs —Part 1:

Fixed signs

固定、立式道路交通标志--第一部

分：固定标志93.080.30

BS EN 12899-4-2007 中文Fixed, vertical road traffic signs — Part 4:

Factory production control

固定、立式道路交通标志--第4部分：

工厂生产控制 93.080.30

BS EN 12899-5-2007 中文Fixed, vertical road traffic signs —Part 5:

Initial type testing

固定的立式道路交通标志--第5部

分：初始型式试验93.080.30


EN 欧洲标准

BS EN 12966-1-2005 中文

Road vertical signs - Variable message traffic

signs 一Part l:Product standard

道路垂直标志--可变信息交通标志--

第1部分：产品标准93.080.30

BS EN 12966-2-2005 中文

Road vertical signs - Variable message traffic

signs 一Part 2: Initial type testing

道路垂直标志-- 可变信息交通标志-

第2部分：初始型式验证93.080.30

BS EN 12966-3-2005-中文版Road vertical signs — Variable message

traffic signs —Part 3: Factory production control

道路垂直标志—可变信息交通标志—

第3 部分：工厂生产控制 93.080.30

BS EN 1317-1-1998 中文Road restraint systems Part 1: Terminology and

general criteria for test methods

道路防护系统.试验方法术语和通用标

准

01.040.13; 01.040.93;

13.200; 93.080.30

BS EN 1317-2-2010 中文

Road restraint systems —Part 2: Performance

classes, impact test acceptance criteria and test

methods for safety barriers

道路防护体系-第2部分：安全栅栏的

性能等级、碰撞试验、验收标准和试验方法

13.200; 93.080.30

BS EN 1317-3-2010 中文

Road restraint systems Part 3: Performance

classes, impact test acceptance criteria and test

methods for crash cushions

道路防护系统。第3部分：防撞垫的性

能等级，冲击试验的验收标准和测试方法

13.200; 93.080.30

BS EN 1317-5-2007+A12008

中文

Road restraint systems —Part 5: Product

requirements and evaluation of conformity for

vehicle restraint systems

道路防护系统-第5部分：车辆防护系

统的生产要求和合格评估13.200; 93.080.30

BS EN 1433-2002-中文版

Drainage channels for vehicular and pedestrian

areas — Classification, design and testingrequirements, marking and evaluation ofconformity

马路篦子及盖板的负荷压力试验方法 93.080.30

BS EN 14339-2005 中文 Underground fire hydrants 地下消防栓 13.220.10; 93.080.30

BS EN 1436-2007+A1-2008-

中文版

Road marking materials — Road marking

performance for road users

道路标记材料—道路用户用道路标记

性能93.080.30

BS EN 14388-2005-中文版Road traffic noise reducing devices —

Specifications道路交通减噪装置，规范 93.080.30

BS EN 14389-1-2007 中文Road traffic noise reducing devices —

Procedures for assessing long term performance— Part 1: Acoustical characteristics

道路交通减噪装置--长期效能评估程

序--第1部分：声学特性93.080.30


EN 欧洲标准

BS EN 1793-2-1998 中文

Road traffic noise reducing devices -Test

method for determining the acoustic

performance Part 2. Intrinsic characteristics of

airborne sound insulation

道路交通噪音减弱装置-测定声学性能

的试验方法。第2部分：隔离空气传播的声音的固有特性

17.140.30; 93.080.30

BS EN 1793-3-1998 中文Road traffic noise reducing devices -Test

method for determining the acousticperformance Part 3. Normalized traffic noise

道路交通噪音降低装置--测定声学性

能的试验方法。第3部分：标准化交通噪音频谱

17.140.30; 93.080.30

BS EN 1794-2-2003 中文

Road traffic noise reducing devices — Non-

acoustic performance —Part 2: General safety

and environmental requirements

道路交通噪声降低装置-非声学性能。

第2部分：安全和环境的一般要求93.080.30

BS EN 1824-2011（中文版） Road marking materials - Road trials 道路标线材料道路试验 93.080.30

BS EN 13201-2：2003 中文Road lighting —Part 2: Performance

requirements道路照明。第2部分：性能要求 93.080.40

BS_EN_13201-3 中文Road lighting —Part 3: Calculation of

performance道路照明。第3部分：性能计算

93.080.40

BS EN 13201-4：2003 中文Road lighting —Part 4: Methods of measuring

lighting performance

道路照明。第4部分：照明性能的测量

方法 93.080.40

BS EN 40-1-1992 中文Lighting columns —Part 1: Definitions and

terms灯柱.第1部分定义和术语 01.040.93; 93.080.40

BS EN 40-2-2004 中文Lighting coluInns 一Part 2: General

requirements and dimensions灯柱。第2部分：基本要求与尺寸 93.080.40

BS EN 40-3-2-2000 中文Lighting columns -Part 3-2: Design and

verification Ð Verification by testing

灯柱。第3-2部分：设计和验证-验证

测试93.080.40

BS EN 40-3-3-2003 中文Lighting columns —Part 3-3: Design and

verification — Verification by calculation

灯柱。第3-3部分：设计和验证-通过

计算来验证 91.160.20

BS EN 40-4-2005 中文

Lighting columns —Part 4: Requirements for

reinforced and prestressed concrete lighting

columns

灯柱--第4部分：钢筋混凝土和预应力

混凝土灯柱的要求93.080.40

BS EN 40-5-2002 中文Lighting columns —Part 5: Requirements for

steel lighting columns灯柱。第5部分：钢灯柱的要求 77.140.01; 93.080.40

BS EN 40-6-2002 中文Lighting columns —Part 6: Requirements for

aluminium lighting columns灯柱。第6部分：铝灯柱的要求 77.150.10; 93.080.40


EN 欧洲标准

BS EN40-7-2002 中文Lighting columns —Part 7: Requirements for

fibre reinforced polymer composite lighting

灯柱。第7部分：纤维增强复合材料灯

柱的要求93.080.40

BS EN 13524-2003+A1-2009

中文

Highway maintenance machines — Safety

requirements公路养护设备--安全要求 43.160; 93.080.99

BS ISO 8349-2002 中文Road vehicles — Measurement of road surface

friction道路车辆--路面摩擦力的测量

BS 6100-4-2008 中文Building and civil engineering – Vocabulary

–Part 4: Transport建筑物和土木工程--词汇--第4部分：

运输

01.040.93; 93.080.01;

93.100; 93.120

BS 64-1992 中文Specification for Normal and high strength

steel bolts and nuts for railway rail

钢轨鱼尾板用一般强度及高强度钢螺

栓和螺母的规范

BS EN 50490-2008-中文版

Electrical installations for lighting and

beaconing of aerodromes — Technicalrequirements for aeronautical ground lightingcontrol and monitoring systems — Units forselective switching and monitoring ofindividual lamps

机场照明和航路信标指示用电气设备.

地面导航照明控制和监测系统用技术要求.个别灯的选择性开关和监控装置

93.120

BS EN 61821-2011-中文版

Electrical installations for lighting and

beaconing of aerodromes — Maintenance ofaeronautical ground lighting constant currentseries circuits

机场照明和航路信标电气设备—— 航

空用地面照明恒流串联电路的维修（中文版）

29.140.50; 93.120

BS EN 61822-2009 中文无英文机场照明和新标用电气安装--恒流调

节器29.140.50; 93.120

BS EN 61823-2003-中文版Electrical installations for lighting and

beaconing of aerodromes — AGL seriestransformers

机场照明和信标用电气设备——AGL系

列变压器（中文版）29.140.50; 93.120

BS EN 14504-2009 中文Inland navigation vessels — Floating landing

stages —Requirements, tests

内河航行船舶--浮动码头--要求、试

验47.060; 93.140

DIN EN 45510-6-2-1998-中

文版

Guide for procurement of power station

equipmentl

Part 6-2: Turbine auxiliaries - Feedwater

heaters

发电厂设备购置说明.第6-2部分:涡轮

机辅助设备.给水加热器27.040; 27.100


EN 欧洲标准

DIN EN 45510-6-3-1998-中

文版 (1)

Guide for procurement of power station

equipmentl

Part 6-3: Turbine auxiliaries

发电站设备的采购导则.第6-3部分:透

平附件.冷凝器工厂27_040; 27_100

BS EN 13036-6-2008-中文版


Test methods —Part 6: Measurement of

transverse and longitudinal profiles in the

evenness and megatexture wavelength ranges

道路和机场表面特性.试验方法.第6部

分:在平坦和巨大表面93.080.10; 93.120

BS EN 13036-8-2008-中文版


Test methods —Part 8: Determination of

transverse unevenness indices

道路和机场表面特性.试验方法.横向

不匀指数的测定 93.080.10; 93.120

BS EN 500-6-2006 中文

Mobile road construction machinery — Safety

—Part 6: Specific requirements for paver-

finishers

移动式道路施工机械--安全--第六部

分：摊铺机的特殊要求91.220


标准号英文标题标准名称国际标准分类EN 欧洲标准

Documents

Transcript of 标准号英文标题标准名称国际标准分类EN 欧洲标准