Dr.R.RAJAVEL BE., ME., Ph.D Mobile - AMET

Dr.R.RAJAVEL BE., ME., Ph.D Mobile: 98656 68650 E-Mail:[email protected]

Career Precise

1. Teaching

Sl. No Name of the College Designation Period Experience

From To Years Months

1. AMET Deemed to be University ,Kanathur,Chennai

Professor& Director

Dec 2020 Till date

0 6

2. AMET Deemed to be University ,Kanathur,Chennai

Professor & HoD June

2014 Dec 2020 6 6

3. Velammal Engineering

college, Chennai Professor &HoD 25/07/12 May 2014 2 0

4. Manipal university

Dubai Assistant

Professor 28/08/10 20/07/2012 2 0

5. SRM University

Chennai Assistant Professor(SG)

25/12/09 25/08/10 0 9

6. Kongu Engineering College, Erode

Tamilnadu

Senior Lecturer 25/05/04 04/12/09 5 6

7. Mahendra Engineering College ,Salem

Tamilnadu

Senior Lecturer 05/08/98 24/05/04 5 9

2. Industry

Sl. No

Name of the employer and

Address

Designation and Nature of works

Period

Experience

From To Years Months

1 Shantam precise parts

Coimbatore Project Development

05/07/97

25/07/98

1 ---

3. Membership in Professional bodies: Heat and Mass Transfer

• solar energy society of India • Indian Society for Technical Education

Research and Development Contribution

1. Research Articles

International journals

1. R. Rajavel and K. Saravanan , Heat Transfer Studies on Spiral Plate Heat Exchanger, Thermal

Science International Scientific Journal , Volume 12, Issue 3, Year 2008 Pages [85 - 90] Scopus

&UGC

2. R.Rajavel and K.Saravanan .,Analysis of Heat Transfer Enhancement in Spiral Heat

Exchanger International journal of Modern Applied Science Vol.2, No.4 pp.68-75, 2008

3. R.Rajavel and K.Saravanan., An Experimental Investigation of Heat Transfer Coefficients for Spiral Heat Exchanger International journal of Modern Applied Science Vol.2, No.5 pp.68- 75,

2008

4. R.Rajavel and K.Saravanan.,An experimental Study of Spiral Plate Heat Exchanger for

Electrolytes Journal of the University of Chemical Technology and Metallurgy Vol.43, No.2

pp.255-260, 2008

5. R.Rajavel and K.Saravanan.,Studies on Spiral Heat Exchanger National journal of Process

and Plant Engineering Vol.24,No.30 pp.65-70, 2007

6. R.Rajavel and Ram.Subbiah.(2010), “Dry sliding wear behaviour analysis of nitrided 316LN

Grade Austenitic stainless steels using gas nitriding process”, International Journal of

Theoretical and Applied Information Technology, Vol.19, No.2, pp 98-101.

http://thermalscience.vinca.rs/authors/524




7. R.Rajavel.and Ram.Subbiah.(2011), “Effect of salt bath nitriding on 316LN Austenitic stainless

steel material”, International Journal of Material Science, Vol.06, No.4, pp 465-471. 8. R.Rajavel and A.John Presin Kumar (2011), „‟Wear loss behaviour of sol-gel treated

aluminium alloys for bearing application”, International Journal of Applied Engineering

Research, Vol.6, No.20, pp 2405 to 2412.

9. R.Rajavel and A.John Presin Kumar,(2011), „‟Specific wear rate behaviour of sol-gel treated

aluminium alloys for bearing application”, International Journal of Applied Engineering


10. R.Rajavel and Ram.Subbiah.(2012), “Microstructure and Wear characteristics of 316LN

Austenitic stainless steel material by plasma nitriding process”, International Review of Applied

Engineering Research, Vol.02, pp 31-35.

11. R.Rajavel and Ram.Subbiah.(2012), “Improving the hardness of AISI 316LN Austenitic

stainless steel material by gas and plasma nitriding process”, International Journal of

Engineering Research and Technology, Vol.05, pp 73-79

12. R.Rajavel and Ram.Subbiah.(2012), “Investigation of 316LN Austenitic stainless steel by gas

and salt bath nitriding process”, International Review of Applied Engineering Research, Vol.2,

pp 23-30.

13. R.Rajavel and Ram.Subbiah.(2012), “Assessment of properties on 316LN Austenitic stainless

steel by salt bath and plasma nitriding process”,International Journal of Applied Engineering

Research, Vol.7, pp 79-84.

14. R.Rajavel and A.John Presin Kumar, (2012), „‟Different hardness sol-gel surface treatment of

A390 aluminium alloy and its tribological effects”,International Journal of Applied Engineering


15. R.Rajavel Ram.Subbiah, S.Satheesh, Shoan C.Sunny, G.Kishor, K.Fahad,(2014), ‘Assessment of Properties on AISI 316LN Austenitic Stainless Steel Material under Low

Temperature Liquid Nitriding Processes ,’ International Journal of Innovative Technology and

Exploring Engineering , Volume-3, Issue-9 pp 69-71

16. R. Rajavel ,Ram Subbiah, Prof R. Ravikumar, and K. Harikrishnan, (2014),” Salt Bath Nitriding

on 316LN Austenitic Stainless Steel Material” Australian Journal of Basic and Applied

Sciences, volume 8 ,No:2, Pages: 188-192.

17. R.Rajavel, Ram.Subbiah, P.Karthick, R.Ilavarasan, T.Prasanth, R.Manjunath(2014). “Effect of

Nitrogen on Low Temperature Nitrided Stainless Steels for Steam Turbine Blades”

International Journal of Recent Technology and Engineering, Volume-3, Issue-1, pp 139-141

18. R.Rajavel ,Ram.Subbiah, S.Satheesh, Shoan C.Sunny, G.Kishor, K.Fahad, (2014) “Effect of

Nitrogen on Stainless Steel Material at Low Temperature Salt Bath Solution Applicable to

Ship Propeller Blades” International Journal of Recent Technology and Engineering Volume-

3, Issue-1 pp:142-144. 19. R.Rajavel ,Ram.Subbiah, P.Karthick, R.Manjunath, T.Prasanth, R.Ilavarasan, “Experimental

Investigation on Hardness of Gas Implanted AISI 316LN Austenitic Stainless Steel,

International Journal of Inventive Engineering and Sciences, Volume-2, Issue-3,pp:7-9

S.No Title Authors Journal, Volume,

Issue, Page no.

Year Index

1. Design And Analysis Of

Gating System For Pump Casing

R. Rajavel

N.Jayakumar, ,

S.Mohanamuru

gan

International

Journal of

Engineering and

Technology, 6(5),

2421-2425

2014 Scopus

2. Experimental And Numerical

Studies Of A Spiral Plate Heat

Exchanger

R.Rajavel Thermal Science,

18(4), 1355-1360

2014 Scopus

& UGC

3. Experimental Investigation Of

Creep Behaviour Of

Aluminium Alloy (LM25)

And Zirconium Di-Oxide

(ZRO2) Particulate MMC

R.Rajavel

A.R.Sivaram,

K.Krishnakuma

r, , R.Sabarish

International

Journal of

Mechanical

Engineering and

Technology, 6(8),

126-138

2015 Scopus

4. Investigation Of Glass Fiber

Reinforced Epoxy Composites

For Buckling Strength

R. Rajavel

N.Jayakumar, ,

S.Mohanamuru

gan

International

Journal of Applied

Engineering

Research, 10(33),

2592-2599

2015 Scopus

5. Morphological

Characterisation Of Poly

Methyl Methacrylate For

Surface Coating Of Metals

Rajavel,

Jayakumar, M. N.,

Mohanamuruga

n, D. S., D. R.,

& Srinivasan

International

Journal of

Mechanical

Engineering and

Technology, 6(8),

139-143

2015 Scopus

6. Performance Analysis Of A

Inverted Downdraft Biomass

Wood Stove

R.Rajavel

A.R.Sivaram,

K.Karuppasamy

, , C.Jagadesh

Vikram

International

Journal of

Mechanical

Engineering and

Technology, 6(8),

144-155.

2015 Scopus

7. Performance Investigation Of

A Closed Cycle Magneto

Hydrodynamics Power Plant

With Liquid Metal As Heat

R.Rajavel

A.R.Sivaram,

G.Kanimomozh

ivendhan, ,

Indian Journal of

Science and

Technology,

8(21),1-6.

2015 Scopus

Source V.P.Durai Raj

8. Residual Stress Analysis In

Austenitic Stainless Steel

Weldment By Finite Element

Method

., Rajavel, R

Jayakumar, N.,

Mohanamuruga

n, S., & Kumar, J. A

Indian Journal of

Science and

Technology,

8(36), 1-4.

2015 Scopus

9. Thermodynamic Analysis Of

A Cascade Refrigeration

System With R744/R290

Mixtures

R.Rajavel

S.Sathish

Kumar,

A.R.Sivaram, ,

Indian Journal of

Science and

Technology, 8(36)

2015 Scopus

10. Experimental Investigations On

The Performance Of A Water Heater Using Waste

Heat From An Air

Conditioning System

R.Rajavel

A.R.Sivaram,

K.Karuppasamy

, , B.Arun

Prasad

Indian Journal of

Science and

Technology, 8(36)

2016 Scopus

11. A Review On Distillate

Productivity Enhancement

Techniques In The Single

Basin Solar Still

R.Rajavel

S.M.Abeetha ,

T.Karthikeyan,

A.R.Sivaram, ,

K.Umanath

Journal of

Advanced Research in

Dynamical and

Control Systems,

S2, 898-924

2017 Scopus

& UGC

12. Comparative Assessment Of

Wiper And Conventional Tool

Inserts In Dry Turning Of Aisi 310 Stainless Steel

R. Rajavel P.

Ramachandran,

K. Umanath,

A.R. Sivaram,

K. Srividhya,

Journal of


Dynamical and

Control Systems,

S2, 860-876

2017 Scopus

& UGC

13. Effects Of Fuel Injection

Timing, Injection Angle,

Ignition Position On Emission

And Spraycharacteristics - An

Overview

R. Rajavel,K.

Srividhya, K.

Umanath, A.R.

Sivaram, V.

Srinivas, N.

Jayakumar.

Journal of

Advanced

Research in

Dynamical and

Control Systems,

S2, 818-825

2017 Scopus

& UGC

14. Experimental Investigation

On Hot Machining Of 17-4 Ph

Stainless Steel

R.Rajavel R.

Praveen Kumar,

,

P.Ramachandra

n, K.Umanath,

P.Sarathkumar

Journal of Advanced

Research in

Dynamical and

Control Systems,

S2, 682-693

2017 Scopus

& UGC

15. Experimental Investigation On

Laser Based Turning Of

R. Rajavel,R.

Praveen Kumar,

Journal of

Advanced

2017 Scopus

17-4 PH Stainless Steel K. Umanath, P.

Ramachandran,

N. Jayakumar

Research in

Dynamical and

Control Systems,

S2, 805-817

& UGC

16. Experimental Study Of Cold

Formed Steel Z-Sections With

Stiffened Holes

R.Rajavel

G.Vijayaganth,

A.R.Sivaram,

K.Umanath, ,

K.Srividhya

Journal of


Dynamical and

Control Systems,

S2, 799-804

2017 Scopus

& UGC

17. Comparative assessment of

wiper and conventional

Tool inserts in dry turning of

AISI 310 stainless steel

R.Rajavel

P.Ramachandra

n, K. Umanath,

A.R.Sivaram,

K.Srividhya,

Journal of

Advanced

Research in

Dynamical and

Control Systems

Vol. 9. Sp– 2 /

2017

2017 Scopus

& UGC

18. Experimental Study On

Hardness Of Aluminium

Alloy (Lm25) And Zro2

Metal Matrix Composite

R.Rajavel

A.R.Sivaram,

S.K.Krishnaku

mar, K.Umanath, ,

N.Jayakumar

Journal of

Advanced

Research in

Dynamical and

Control Systems,

S2, 877-882

2017 Scopus

& UGC

19. Experimental Study On Surface

Quality Of Mig

Welded Joints

R.Rajavel

A.R.Sivaram,

M.Jaya Kumar,

K.Umanath, ,

T.Karthikeyan

Journal of

Advanced

Research in

Dynamical and

Control Systems,

S2, 925-929

2017 Scopus

& UGC

20. Optimising The Machining

Parameters To Reduce The

Cycle Time In The Turning Of Stainless Steel 316

R.Rajavel R.

Praveen Kumar,

, K.Umanath,

D.S.Balaji,

G.Vijayaganth

Journal of


Dynamical and

Control Systems,

S2, 694-707

2017 Scopus

& UGC

21. Optimization Of Machining

Parameters In Wire Cut Edm

Using Taguchi Techniques

R.Rajavel

A.R.Sivaram,

V.Vinoth

Kumar,

K.Umanath,

P.Sarathkumar,

Journal of

Advanced

Research in

Dynamical and

Control Systems,

S2, 883-897

2017 Scopus

& UGC

22. Hydro Treated Vegetable Oil

Derived Renewable Diesel: A

R.Rajavel P.

Ramanathan, V.

Srinivas,

International

Journal of

Mechanical

2017 Scopus

& UGC

Technological Review A.R.Sivaram, Engineering &

Technology, 7(8)

23. Experimental Investigations

On The Performance Of A

Water Heater Using

Encapsulated PCM With

Nanoparticle

R.Rajavel

P.Sarathkumar,

A.R.Sivaram, ,

R.Praveen

Kumar,

S.K.Krishnaku

mar

Materials Today

Proceedings, 4(2)

2017 Scopus

& UGC

24. Study Of Wear In Chrome

Plated Cylinder Liner In Two

Stroke Marine Diesel Engine

Lubricated By Hans Jensen

Swirl Injection Principle

R. Rajavel

N.Jayakumar,

S.Mohanamuru gan,

Materials Today

Proceedings, 4(2)

2017 Scopus

& UGC

25. Exhaust back pressure effect on

the performance features of a

diesel engine

R. Rajavel A.

R. Sivaram, , N.

Jayakumar and

M. Vinothkumar

ARPN Journal of

Engineering and

Applied Sciences,

12(19), 5353-5356

2017 Scopus

& UGC

26. Investigation of process

parameters on electrochemical

micro machining of cu-zn-sn

alloy

R. Rajavel N.

Jayakumar, , A.

R.Sivaram, P.

Ramanathan

and K.

Srividhya

ARPN Journal of

Engineering and

Applied Sciences

VOL. 12, NO. 21,

NOVEMBER

2017

2017 Scopus

& UGC

27. A Review On Effect of Nano-

Sized Particle As Fuel Additive In CI Engine

R. Rajavel ,P.

Ramanathan

International

Journal of

Mechanical and

Production

Engineering

Research and

Development

ISSN (P): 2249-

8001 Vol. 8,

Special Issue 7

(IJMPERD)

2018 Scopus

& UGC

29. Risk assessment of hazards

using fuzzy inference logic in

construction industry

r. Rajavel V.

Kurinji1 , pavan

aditya , , s.

Prabakaran & k.

Umanath

International

Journal of

Mechanical and

Production

Engineering

Research and

2018 Scopus

Development

(IJMPERD)

ISSN(P): 2249-

6890; ISSN(E): 2249-8001 Vol. 8,

Special Issue 7,

Oct 2018, 910-921

30. A review on joining of

dissimilar metals by friction

welding

Rajavel. R

Vijayaganth. G,

umanath. K &

International

Journal of

Mechanical and

Production

Engineering

Research and

Development

(IJMPERD)

ISSN(P): 2249-

6890; ISSN(E): 2249-8001 Vol. 8,

Special Issue 7,

Oct 2018, 927-933

2018 Scopus

31. An impact of Nano additives on

emissions of biodiesel fuelled

diesel engine

R. Rajavel A.

R. Sivaram, , m.

Vinothkumar, s.

Ruban kumar &

s. B. Narayana

swamy

International

Journal of

Mechanical and

Production

Engineering

Research and

Development

(IJMPERD)

ISSN(P): 2249-

6890; ISSN(E): 2249-8001 Vol. 8,

Special Issue 7,

Oct 2018, 1189-

1195

2018 Scopus

32. An effect of Nano sized cerium

oxide particle in the used

edible oil ethanol blend and

diesel on the performance and

emission characteritistics of CI

engine

R. Rajavel P.

Ramanathan

International

Journal of

Mechanical and

Production

Engineering

Research and

Development

(IJMPERD) ISSN

(P): 2249-6890;

ISSN (E): 2249-

8001 Vol. 8,

Special Issue 7,

Oct 2018, 1181-

2018 Scopus

1188

33. A technical review on emulsion

fuel with Nano additives

R. Rajavel

A. R. Sivaram, ,

k. Umanath, s.

Ruban kumar &

S. B. Narayana

swamy

International

Journal of

Mechanical and

Production

Engineering

Research and

Development

(IJMPERD)

ISSN(P): 2249-

6890; ISSN(E): 2249-8001 Vol. 8,

Special Issue 7,

Oct 2018, 1196-

1200

2018 Scopus

34. Thermal Energy analysis using

TRNSYS in PCM Storage Tank

R. Rajavel A. Ponshanmuga

ku mar

International Journal on Future Revolution in Computer Science & Communication Engineering ISSN: 2454-4248 Volume: 3 Issue: 11 120 –

124

2017 UGC

35. Simulation and Performance Analysis of a Grid Connected Photovoltaic System in

Cold Climate Region of

India.

R Rajavel

Madhuchandrik

a

International Journal of Applied Engineering Research ISSN 0973- 4562 Volume 13,

Number 8 (2018)

pp. 5904-5908

2018 UGC

36. An experimental study of wear

behaviour of aluminium

alloy(lm6) and zirconium

carbide(zrc)

R. Rajavel A.

R. Sivaram , s.

K.

Krishnakumar ,

s.

Krishnamohan ,

k. Umanath

International

Journal of

Mechanical and

Production

Engineering

Research and

Development

(IJMPERD)

ISSN(P): 2249-

6890; ISSN(E): 2249-8001 Vol. 8,

Special Issue 7,

Oct 2018, 1230-

1235

2018 Scopus

37. Enhancement of Heat Transfer

in Double Pipe Heat Exchanger

R.Rajavel

Ponshanmugak

umar A,

Materials Today:

Proceedings,

Vol.16. pp.706-

713 ISSN number

2214-7853

2019 Scopus

38. Experimental Analysis of

Vapour Absorption Generator

integrated with Thermal

Energy Storage system

R.Rajavel

Ponshanmugak

umar A,

Materials Today:

Proceedings, Vol.16. pp.1158-

1167 ISSN

number 2214-

7853

2019 Scopus

39. Investigation of emission

control in CI engine using

Aqua Silencer

R.Rajavel

P.Ramanathan

, , A.R.Sivaram,

S.Kaliappan

Test Engineering

and Management.

Vol 82, PP:

15588-15597

ISSN number

0193-4120

2020 Scopus

40. Experimental Investigation of

Mechanical Behaviour of Al7075AlloyReinforced with

B4C MMC

R.Rajavel

S.K.Krishnaku

mar,S.Krishna

mohan,R.Sunda

r,A.R.Sivaram,

International

Journal of

Mechanical and

Production

Engineering

Research and

Development,

Vol.10(2), pp.773-

778 ISSN number

2249-8001

2020 Scopus

41. Experimental study of

mechanical properties of 410

stainless steel welded joints

R. Rajavel

M. Bala kumaran,

&

A. Parthiban

International

Journal of

Mechanical and

Production

Engineering

Research and

Development,

Vol.10(1), pp.771-

776 ISSN number

2249-8001

2020 Scopus

42. Experimental study of mini

thermoelectric refrigerator

R. Rajavel,

M. Bala kumaran, V. Leela vinodhan, A. R.

Sivaram & P.

Prakash

International

Journal of

Mechanical and

Production

Engineering

Research and

Development,

Vol.10(2), pp.829-

2020 Scopus

836 ISSN number

2249-8001

43. Study of Vapour Compression

Refrigeration System with

Nanoparticles – A Technical

Review

R. Rajavel

A. R. Sivaram,

& N. Prabhu

International

Journal of

Mechanical and

Production

Engineering

Research and

Development,

Vol.10(1), pp.763-

770 ISSN number 2249-8001

2020 Scopus

44. Impact of Butanol on

Performance and Emission

Characteristics of a Diesel

Engine

R. Rajavel

A. R. Sivaram,

N. Prabhu, A.

Parthiban, & M.

Vinothkumar

International

Journal of

Mechanical and

Production

Engineering

Research and

Development,

Vol.10(2), pp.811–

820 ISSN number

2249-8001

2020 Scopus

45. Investigation of Pongamia

Pinnata with Nano Additives

on Performance

Characteristics of Diesel

Engine

R.Rajavel

A.R.Sivaram,

N.Prabhu,

P.Ramanathan, ,

P.Prakash

Test Engineering

and Management.

Vol 83, PP:

14332-14338

ISSN number

0193-4120

2020 Scopus

46. Experimental Investigation of

Friction Welding on

Aluminium Alloy

R.Rajavel

R. Praveen Kumar ,

,G.Navaneethak

rishnan,R.Suma

nth Raj ,

E.Vinoth

Test Engineering

and Management.

Vol 83, PP: 13477

- 13483 ISSN

number 0193-

4120

2020 Scopus

47. Morphological

Characterization of Friction

Welded Aluminium Alloy

R.Rajavel

R. Praveen Kumar,

,

G.Navaneethakr

ishnan

International

Journal of

Mechanical and

Production

Engineering

Research and

Development,

Vol.10(2), pp.1013-

1020

2020 Scopus

ISSN number

2249-8001

48. Experimental study on

aluminium based sandwich

composite with polypropylene

foam sheet

R.Rajavel

A.R.Sivaram,

N.Manikandan,

S.K.Krishnaku

mar, , S.Krishnamoha

n,

G.Vijayaganth

Materials Today:

Proceedings,

Vol.24. Part 2,

pp.746-753 ISSN

number 2214-

7853

2020 Scopus

2. Books / Notes published

Sl. No

Title of the Book

Author (s)

Name & Address of

the Publisher

Year of Publishing

ISBN Number

1. Thermal Engineering

Dr.R.Rajavel

A.R.Sivaram

AMET University

2016

978-93-85434-61-7

2.

A Hand book on Refrigeration

and Air

Conditioning

Dr.R.Rajavel A.R.Sivaram

AMET University

2017

978-93-85434-62-4

3.

Fundamentals

on Hydraulics

and

Pneumatics

Dr.R.Rajavel P.Senthilkumar N.Jayakumar

AMET University

2017

978-93-85434-98-

4. FDP and Seminar organized

S.No Name of the

program Name &

Address of the

institution

Sanctioned by Dura

tion Amount

in RS

(Lakh

1. Faculty Development program on Thermal Engineering

Letter No:

16/CFD/summer/FDTP/2013-

40

Dated: 15.5.2013

Velammal Enginnering College

Anna University One

Week Rs 80,000

2. DRDO sponsored workshop on Engine Emissions and its Control Technologies

ERIP/ER/13-14/33

DRDO Bhawan New Delhi -

110 011

Velammal Enginnering

College

DRDO Govt

of India One day Rs 30,000

1. Research Project

S.No Title of the

project Principal

Investigator

(PI)

Funding Agency Duration Amount

(Lakhs)

1. Recycling of Hostel Sewage Sludge to Land Using Spiral Plate Heat Exchanger

Dr.Rajavel R

DST –India

Ref.No: DST/SSTP/DP/2013

DST/TDD/ 2K13/223

Dated:3/6/2013

Completed the Presentation.

Revision suggested

by the expert

committee

Two years 39 .0

2. Experimental

Investigation of Laser

Induced ignition in an

Internal Combustion

engine

Dr.Rajavel R AICTE-RPS Two years 14.0

3. Experimental

Investigation of Solar

Desiccant Air

Conditioning System

using Spiral Plate

Heat Exchanger

Dr.Rajavel R

SERI

Proposal

submitted on 09.10.2014

34.0

4. Performance

Enhancement of solar

PV Integrated Chip

Connected System –

Challenges and Solution

Dr.Rajavel R

Ministry of New and

Renewable Energy

Proposal

submitted on

13.10.2014

19.0

5. Experimental

investigation of laser

ignition for internal

combustion engines

Dr.Rajavel R

DST

Proposal submitted

Ref.No. DST/TSG/A

F/2015/24

18.0

6. Establishment of

Effective process on

Energy Management

on-board ships to

control the net CO2

Emission to the

environment by

studying various

types of vessel

Emission levels and

the conventional Energy Management

plans

Dr.Rajavel R

IMAU

Proposal submitted on

30.06.2015

45.0

6. Conference organized

S.No Name of the

program Name &

Address of the

institution

Date Number of

papers

received

Keynote speakers

1. International Conference on Technological Advances in Mechanical Engg. (ICTAME-2017)

AMET University 22nd sep 2017 112 Mr.Dirk Wohltmann WABCO India Dr.S.Rajadurai Shardha Motors Mr.Krishnan Sadagopan Ashok Leyland

2. International Conference on Technological Advances in Mechanical Engg. (ICTAME-2018)

AMET University 19th & 20 th of

sep 2018 161 Mr.Thomas

Krusenbaum Ashok Leyland

2. Seminar organized

S.No Name of the Seminar Organiser Date

1 Advances in Composite

Materials and welding

technology

Department of

Mechanical Engineering

AMET University

2nd September 2016

2 Recent Developments in

Under Water Welding

(RDUWW’17)

Department of

Mechanical Engineering

AMET University

16 th March 2017

3. Workshop organized

Sl No Year Event

Category Event Name Name of the expert

1. 2015 Workshop Entrepreneur Orientation

Program

NSIC - TSC

(A Govt. India Enterprise )

2.

2015

Workshop AUTOSPARK – Engine

Design and Assembly

Robosejugous in association

with IIT Kharagpur

4. No. of scholars awarded Ph.D : 2

No .of scholars pursuing Ph.D :8

Participation in Corporate Life

a. The Institution 1. Head of the Department for the past 9 years 2. Chairmen for board of studies 3. Chief superintend in COE office 4. Academic audit coordinator 5. Research supervisor in ANNA university and AMET

University 6. Convener for international conference , seminar and

workshop 7. Preparation of CBCS Curriculum, NBA SAR.

b. Reviewer in journal Reviewer in international journal of thermal science Institute of Nuclear Sciences Vinca, P.O. Box 522, 11001 Belgrade, Serbia

Scholastics

Sl. No

Degree

Name of the Institution

Name of the University

Month & Year of Passing

Class

1.

Ph.D

Kongu Engineering College

Anna University,Chennai

2009

Awarded

2.

ME

Govt .College of Engineering,

Salem

Anna University

2004

I

3. BE Angala Amman College ,Trichy Bharathidasan 1997 I

PERSONAL INFORMATION

S.No Name : Dr.R.RAJAVEL

1. Present Designation : Professor & Director

2. Department : Mechanical

3. Area of specialization : Thermal Engineering

4. DOB & Age : 25/07/1974 & 47

5. Address: I-13, Prakrti Apartment 100 feet by pass road, Velachery, Chennai -42

6. Mobile : 91- 98656 68650

7. Email : [email protected], [email protected]

8. Marital Status : Married

.

CENTRE FOR FACULTY DEVELOPMENT

Anna University, Chennai - 600 025 ”

Letter Plc. 16/CFD/Summer/ FDTP/2013-40 Dated:15.5.2013

Dr.D.Mohan Director

Phone : 044- 22358217, Dir: 044- 22301692 E-

mail : [email protected]

Sir Sub: Centre for Faculty Development - Faculty Development Training Programme

for Summer Vacation 2013 - Intimation for Selection — Reg.

I am to inform th at the fa homing programme is selected for your Department / Institution

8rancb Semester

Name of the Programme

Name and Designation

of the Co-ordinatogs)

B.E V sem

Mech

ME 2301 Thermal Engineering

Dr.R.Rajavel Professor & HOD M.Karthick Assistant Professor

Kindly refer the enclosed guidelines and to conduct the above said programme as per

your schedule

Yours faithfully,

I,

Director

RAJADURAI INNOVATIONS

I..rt’s IJ ririd Deserve

To

The Registrar

Academy of Maritime Education and Training ( AMET).

135, East Coast Road (ECR), Karlath air,

Chennai 6031. 1. 2.

mind Attn: Dr. R.Rajavel, Professor & Head, Dept. of Mechanical Engg.

Dear Sir,

Subject : Project completion paymen—t Reg.

We are confirming that project entitled “C atalytic Reduction ot’ fiOz in Diesel Engine” is

completed. An amount of Rs. 1,30,000 - ( Rupees One Lakh Thirty Thousand Only) is paid

tor the project. We thank you for your continuous support for the successful completion of

the project. Congratulations to the team.

Executive Director

D-202, Sylvan County, Mahindra City, Kancheepuram, Tamil Nadu, India - 603002, Phone No: 044-47490164

Email: raiadurai innovations, hotmail.com Website:www raiaduraiin com

Rangasamy Rajavel

https://orcid.org/0000-0002-0381-5905

• Other IDs • Scopus Author ID: 35111657100

o academy of maritime education and training: Chennai, tamilnadu, IN 2014-06-30 to present | Professor and Head (Mechanical) Employment

Source:Rangasamy Rajavel

http://www.scopus.com/inward/authorDetails.url?authorID=35111657100&partnerID=MN8TOARS

http://www.scopus.com/inward/authorDetails.url?authorID=35111657100&partnerID=MN8TOARS

o Anna University Chennai: Chennai, Tamil Nadu, IN 2005-06-08 to 2009-09-16 | Ph.D (Mechanical) Education

Source:Rangasamy Rajavel

o Experimental investigation of mechanical behaviour of al7075 alloy reinforced with b<inf>4</inf>c

mmcInternational Journal of Mechanical and Production Engineering Research and Development 2020 |

journal-article

EID: 2-s2.0-85084359703

Part of ISSN: 22498001

22496890

Source:Rangasamy RajavelviaScopus - Elsevier

o Experimental study of mini thermoelectric refrigeratorInternational Journal of Mechanical and

Production Engineering Research and Development

2020 | journal-article

DOI: 10.24247/ijmperdapr202083

EID: 2-s2.0-85083563292 Part of ISSN: 22498001 22496890


o Experimental study on aluminium based sandwich composite with polypropylene foam sheetMaterials

Today: Proceedings

https://portal.issn.org/resource/ISSN/2249-8001






https://doi.org/10.24247/ijmperdapr202083









2020 | conference-paper

DOI: 10.1016/j.matpr.2020.04.331

EID: 2-s2.0-85090552781

Part of ISSN: 22147853 Source:Rangasamy RajavelviaScopus - Elsevier

o Impact of butanol on performance and emission characteristics of a diesel engineInternational

Journal of Mechanical and Production Engineering Research and Development 2020 | journal-article


EID: 2-s2.0-85083547057 Part of ISSN: 22498001 22496890


o Morphological characterization of friction welded aluminium alloyInternational Journal of Mechanical

and Production Engineering Research and Development 2020 | journal-article


EID: 2-s2.0-85083843693 Part of ISSN: 22498001 22496890


o Study of vapour compression refrigeration system with nanoparticles – a technical

reviewInternational Journal of Mechanical and Production Engineering Research and Development


EID: 2-s2.0-85084360769

Part of ISSN: 22498001 22496890


o Theoretical Investigation of Friction Welding on Magnesium and Aluminium AlloyIOP Conference

Series: Materials Science and Engineering


DOI: 10.1088/1757-899X/923/1/012023

EID: 2-s2.0-85094605842

https://doi.org/10.1016/j.matpr.2020.04.331



























https://doi.org/10.1088/1757-899x/923/1/012023

https://doi.org/10.1088/1757-899x/923/1/012023

https://doi.org/10.1088/1757-899x/923/1/012023

https://doi.org/10.1088/1757-899x/923/1/012023

https://doi.org/10.1088/1757-899x/923/1/012023

o


Part of ISSN: 1757899X 17578981

An experimental investigation on compression strength and durability of geopolymer

mortarInternational Journal of Mechanical and Production Engineering Research and Development


EID: 2-s2.0-85063448549 Part of

ISSN: 22498001 22496890


o An experimental investigation on effective usage of waste glass in concreteInternational Journal of

Mechanical and Production Engineering Research and Development 2019 | journal-article

EID: 2-s2.0-85063486906

Part of ISSN: 22498001 22496890


o Enhancement of heat transfer in double pipe heat exchangerMaterials Today: Proceedings


DOI: 10.1016/j.matpr.2019.05.149

EID: 2-s2.0-85070913384


o Experimental analysis of vapour absorption generator integrated with thermal energy storage

systemMaterials Today: Proceedings


DOI: 10.1016/j.matpr.2019.05.209

EID: 2-s2.0-85070856357

https://portal.issn.org/resource/ISSN/1757-899X
























o



o Experimental investigation of grinding characteristics using garnet with water as

nanofluidInternational Journal of Mechanical and Production Engineering Research and Development



EID: 2-s2.0-85063550624

Part of ISSN: 22498001 22496890

Friction welding on magnesium and aluminium alloy-a reviewInternational Journal of Mechanical

Engineering and Technology


EID: 2-s2.0-85063558501 Part of

ISSN: 09766359 09766340


o Investigation on spark electrical discharge machining of Si<inf>3</inf>N<inf>4</inf> based

advanced conductive ceramic compositesMaterials Today: Proceedings 2019 | conference-

paper

DOI: 10.1016/j.matpr.2019.09.090

EID: 2-s2.0-85090138459


o Solar PV technology for smart cities of IndiaInternational Journal of Recent Technology and

Engineering

























o


EID: 2-s2.0-85061065981


o The effects of oxygen enriched combustion on fuel economy and engine performance of a diesel

engineInternational Journal of Mechanical and Production Engineering Research and Development 2019

| journal-article

EID: 2-s2.0-85063431026

Part of ISSN: 22498001 22496890


o A comparative study on performance of a grid connected solar PV system installed in the urban,

rural and coastal region of IndiaProceedings of the 2nd International Conference on Inventive Systems

and Control, ICISC 2018


DOI: 10.1109/ICISC.2018.8399046

EID: 2-s2.0-85050106712

A review on joining of dissimilar metals by friction weldingInternational Journal of Mechanical and



DOI: 10.24247/ijmperddec201893

EID: 2-s2.0-85066747627 Part of

ISSN: 22498001 22496890


o A technical review on emulsion fuel with NANO additivesInternational Journal of Mechanical and











https://doi.org/10.1109/icisc.2018.8399046



https://doi.org/10.24247/ijmperddec201893








o


EID: 2-s2.0-85062219793

Part of ISSN: 22498001 22496890


o An effect of performance and emission characteristics of propanol–Diesel blend with cerium oxide

additive in CI engineInternational Journal of Mechanical and Production Engineering Research and

Development


EID: 2-s2.0-85062213190

Part of ISSN: 22498001 22496890


o An experimental study of wear behaviour of aluminium alloy(LM6) and zirconium

carbide(ZrC)International Journal of Mechanical and Production Engineering Research and Development


EID: 2-s2.0-85062212435

Part of ISSN: 22498001 22496890


o An impact of nano additives on emissions of biodiesel fuelled diesel engineInternational Journal of

Mechanical and Production Engineering Research and Development 2018 | journal-article

EID: 2-s2.0-85062221280

Part of ISSN: 22498001 22496890





















o

Experimental Analysis of en 19 Alloy Material on EDM for Improving Geometrical Errors Using

Copper Pentagon Shaped ElectrodeMaterials Today: Proceedings


DOI: 10.1016/j.matpr.2017.12.020

EID: 2-s2.0-85045149766


o Experimental analysis of MIG welded jointsInternational Journal of Mechanical and Production

Engineering Research and Development


EID: 2-s2.0-85062224220

Part of ISSN: 22498001 22496890


o Experimental investigation of enriched oxygen in CI engineInternational Journal of Mechanical and



EID: 2-s2.0-85062210249

Part of ISSN: 22498001 22496890


o Risk assessment of hazards using fuzzy inference logic in construction industryInternational Journal

of Mechanical and Production Engineering Research and Development 2018 | journal-article

EID: 2-s2.0-85066739236

Part of ISSN: 22498001 22496890


o A review on distillate productivity enhancement techniques in the single basin solar stillJournal of

Advanced Research in Dynamical and Control Systems 2017 | journal-article























EID: 2-s2.0-85050347830

Part of ISSN: 1943023X Source:Rangasamy RajavelviaScopus - Elsevier

o Comparative assessment of wiper and conventional tool inserts in dry turning of AISI 310 stainless

steelJournal of Advanced Research in Dynamical and Control Systems


EID: 2-s2.0-85033782887


o Effects of fuel injection timing, injection angle, ignition position on emission and

spraycharacteristics - An overviewJournal of Advanced Research in Dynamical and Control Systems


EID: 2-s2.0-85050336263


o Exhaust back pressure effect on the performance features of a diesel engineARPN Journal of

Engineering and Applied Sciences


EID: 2-s2.0-85031763171


o Experimental investigation on hot machining of 17-4 PH stainless steelJournal of Advanced Research

in Dynamical and Control Systems


EID: 2-s2.0-85053080011


o Experimental Investigations on the Performance of A Solar Pond by using Encapsulated Pcm with

NanoparticlesMaterials Today: Proceedings

















DOI: 10.1016/j.matpr.2017.02.080

EID: 2-s2.0-85018428627


o Experimental study of cold formed steel Z-sections with stiffened holesJournal of Advanced Research

in Dynamical and Control Systems


EID: 2-s2.0-85053075951


o Experimental study on hardness of aluminium alloy (LM25) and ZrO<inf>2</inf> metal matrix

compositeJournal of Advanced Research in Dynamical and Control Systems 2017 | journal-article

EID: 2-s2.0-85050340513


o Experimental study on surface quality ofmig welded jointsJournal of Advanced Research in

Dynamical and Control Systems


EID: 2-s2.0-85050349119


o Hydro treated vegetable oil derived renewable diesel: A technical reviewInternational Journal of

Mechanical Engineering and Technology


EID: 2-s2.0-85026476816

Part of ISSN: 09766359 09766340


o Investigation of process parameters on electrochemical micro machining of Cu-Zn-Sn alloyARPN

Journal of Engineering and Applied Sciences






















EID: 2-s2.0-85034433135


o Investigation on laser based turning of 17-4 PH stainless steelJournal of Advanced Research in

Dynamical and Control Systems


EID: 2-s2.0-85053078926


o Optimising the machining parameters to reduce the cycle time in the turning of stainless steel

316Journal of Advanced Research in Dynamical and Control Systems 2017 | journal-article

EID: 2-s2.0-85053081976


o Optimization of machining parameters in wire cut edm usingtaguchi techniquesJournal of Advanced

Research in Dynamical and Control Systems


EID: 2-s2.0-85050369587


o Study of Wear in Chrome Plated Cylinder Liner in Two Stroke Marine Diesel Engine Lubricated by

Hans Jensen Swirl Injection PrincipleMaterials Today: Proceedings 2017 | conference-paper

DOI: 10.1016/j.matpr.2017.01.176

EID: 2-s2.0-85018386849


o Experimental investigations on the performance of a water heater using waste heat from an air

conditioning systemIndian Journal of Science and Technology 2015 | journal-article

DOI: 10.17485/ijst/2015/v8i36/88473

EID: 2-s2.0-84961904736 Part of ISSN: 09745645 09746846




















https://doi.org/10.17485/ijst/2015/v8i36/88473









o Performance investigation of a closed cycle magneto hydrodynamics powerplant with liquid metal

as heat sourceIndian Journal of Science and Technology 2015 | journal-article

DOI: 10.17485/ijst/2015/v8i21/78473

EID: 2-s2.0-84944452729 Part of ISSN: 09745645 09746846


o Residual stress analysis in austenitic stainless steel weldment by finite element methodIndian

Journal of Science and Technology


DOI: 10.17485/ijst/2015/v8i36/87558

EID: 2-s2.0-84961923909 Part of ISSN: 09745645 09746846


o Thermodynamic analysis of a cascade refrigeration system with R744/R290 mixturesIndian Journal

of Science and Technology


DOI: 10.17485/ijst/2015/v8i36/87559

EID: 2-s2.0-84961875673 Part of ISSN: 09745645 09746846


o Design and analysis of gating system for pump casingInternational Journal of Engineering and

Technology


EID: 2-s2.0-84920678572

Part of ISSN: 09754024 23198613


o Experimental and numerical studies of a spiral plate heat exchangerThermal Science


DOI: 10.2298/TSCI130317131R

EID: 2-s2.0-84916931689

Part of ISSN: 03549836































https://doi.org/10.2298/tsci130317131r







o Assessment of properties on 316LN austenitic stainless steel material by plasma and salt bath

nitriding processesInternational Journal of Applied Engineering Research 2012 | journal-article

EID: 2-s2.0-84867267269

Part of ISSN: 09734562 09739769


o Dry sliding wear behaviour analysis of nitrided 316LN grade austenitic stainless steels using

gas nitriding processJournal of Theoretical and Applied Information Technology 2010 | journal-article

EID: 2-s2.0-78650292506

Part of ISSN: 18173195 19928645


o Heat transfer studies on spiral plate heat exchangerThermal Science


DOI: 10.2298/TSCI0803085R

EID: 2-s2.0-70350580953

Part of ISSN: 03549836 Source:Rangasamy RajavelviaScopus - Elsevier Record last modified Jan 23, 2021 7:18:25 AM

















Dr.R.RAJAVEL BE., ME., Ph.D Mobile - AMET

Documents

Transcript of Dr.R.RAJAVEL BE., ME., Ph.D Mobile - AMET