B1 Car Seats

2017 Tillett Racing Seats Price List

All prices in UK pounds (Excluding VAT on UK sales)

Description

Approximate Additional information

The B1 is an ultra lightweight seat with a standard saloon seating angle weight +/- 10% This seat can be used with road seat belts Price Part Number

B1 carbon epoxy car seat 3 kg Side mount £1,172 B1-44.5CARDouble skin carbon shell 44.5 cm wide at critical point between the gearbox tunnel and door sill. Uncovered (includes headrest pad)

Two panel set for the B1 seat in Black Dinamica suede .9 kg Includes padded cushion and back panel £202 TP2B1

Replacement headrest panel for B1 seat in black Dinamica suede .1 kg Padded head panel with Tillett logo £70 TP1B1

B2 Car Seats

The B2 is a lightweight reclined race seat suited to low prototype racers This seat can be used with road seat belts

B2 carbon epoxy car seat 3 kg Side mount £1,172 B2-44.5CARDouble skin shell 44.5 cm wide at critical point between the gearbox tunnel and door sill. Uncovered (includes headrest pad)

Two panel set for the B2 seat covered in black Dinamica suede .9 kg Includes padded cushion and back panel £202 TP2B2


B4 Car Seats

The B4 has a reclined driving position suited to very low roof prototype racers Similar to the B6 in size

B4-43 carbon GRP car seat 4.9 kg Side mount £628 B4-43C/GRPDouble skin shell 43 cm wide at critical point between the gearbox tunnel and door sill. Uncovered (includes headrest pad)

B4-43 black GRP car seat 4.9 kg Floor mount £533 B4-43GRPDouble skin shell 43 cm wide at critical point between the gearbox tunnel and door sill. Uncovered (includes headrest pad)

The B4-40 is the same seat as above but with the rolled edge cut to fit between a narrow gearbox centre consol and door sill

B4-40 carbon GRP car seat 4.9 kg Side mount "rolled edges cut off" £628 B4-40C/GRPDouble skin shell 40 cm wide at critical point between the gearbox tunnel and door sill. Uncovered (includes headrest pad)

B4-40 black GRP car seat 4.9 kg Side mount "rolled edges cut off" £533 B4-40GRPDouble skin shell 40 cm wide at critical point between the gearbox tunnel and door sill. Uncovered (includes headrest pad)



B5 Car Seats

The B5 is a saloon car seat that was designed originally for the Elise market This seat can be used with road seat belts

B5 carbon GRP car seat 4.2 Kg Side mount £651 B5-41C/GRPCarbon model only has carbon fibre on the front surface with a GRP back surface Uncovered (includes headrest pad)

B5 black GRP car seat 4.3 kg Side mount £577 B5-41GRPDouble skin shell 41 cm wide at critical point between the gearbox tunnel and door sill. Uncovered (includes headrest pad)



B1 Car Seats



DescriptionApproximate Additional information Part Number

The standard B6 is a narrow lightweight race seat (This seat is not FIA approved) weight +/- 10% The B6 is made for use with a full race harness Price

B6-44 carbon GRP car seat 4.5kg Bottom mount as standard £543 B6-44C/GRP

Double skin shell 44 cm wide at critical point between the gearbox tunnel and door sill. Uncovered (includes headrest pad)

B6-44 black GRP car seat 4.5kg Bottom mount as standard £478 B6-44GRP


The B6-40 is the same seat as above with the rolled edge cut to fit between a narrow gearbox centre consol and door sill

B6-40 carbon GRP car seat 4.2kg Bottom mount "rolled edges cut off" £543 B6-40C/GRP


B6-40 black GRP car seat 4.2kg Bottom mount "rolled edges cut off" £478 B6-40GRP




The standard B6 XL is a lightweight race seat for non FIA use weight +/- 10% The B6 XL is made for use with a full race harness

B6-47 XL carbon GRP car seat 4.5kg Bottom mount as standard £543 B6XL-47C/GRP


B6-47 XL black GRP car seat 4.5kg Bottom mount as standard £478 B6XL-47GRP


The B6-43 XL is the same seat as above with the rolled edge cut to fit between a narrow gearbox centre consol and door sill

B6-43 XL carbon GRP car seat 4.2kg Bottom mount "rolled edges cut off" £543 B6XL-43C/GRP


B6-43 XL black GRP car seat 4.2kg Bottom mount "rolled edges cut off" £478 B6XL-43GRP


Two panel set for the B6 XL seat covered in black Dinamica suede .9 kg Includes padded cushion and back panel £202 TP2B6XL

Replacement headrest panel for B6 XL seat in black Dinamica suede .1 kg Padded head panel with Tillett logo £70 TP1B6XL

NEW 2017 model B6 Car Seats



Description Approximate Additional information Part Number

The B6 Screamer is is a new lighter weight version of the B6F which is FIA approved to 8855-1999 The B6 Screamer is made for use with a full race harness Price

B6 Screamer carbon GRP car seat (FIA homologated) 6.1 kg Side mount £716 B6S-44C/GRP


B6 Screamer black GRP car seat (FIA homologated) 6 1kg Side mount £623 B6S-44GRP


The B6-40 Screamer is the same seat as above with the rolled edge cut to fit between a narrow gearbox centre consol and door sill

B6-40 Screamer carbon GRP car seat (FIA homologated) 5.8 kg Side mount "rolled edges cut off" £716 B6S-40C/GRP


B6-40 Screamer black GRP car seat (FIA homologated) 5.8 kg Side mount "rolled edges cut off" £623 B6S-40GRP


Two panel set for the B6 Screamer seat covered in black Dinamica suede .9 kg Includes padded cushion and back panel £202 TP2B6S

Replacement headrest panel for B6 Screamer seat in black Dinamica suede .1 kg Padded head panel with Tillett logo £70 TP1B6S

NEW B6 XL Screamer

The new FIA approved B6 XL Screamer is a lighter weight version of the B6F XL The B6 XL Screamer is made for use with a full race harness

B6 XL Screamer carbon GRP car seat (FIA homologated) 6.1 kg Side mount £716 B6SXL-47C/GRP


B6 XL Screamer black GRP car seat (FIA homologated) 6 1kg Side mount £623 B6SXL-47GRP


The B6 XL 43 Screamer is the same seat as above with the rolled edge cut to fit between a narrow gearbox centre consol and door sill

B6 XL 43 Screamer carbon GRP car seat (FIA homologated) 5.8 kg Side mount "rolled edges cut off" £716 B6SXL-43C/GRP


B6 XL 43 Screamer black GRP car seat (FIA homologated) 5.8 kg Side mount "rolled edges cut off" £623 B6SXL-43GRP


Two panel set for the B6 XL Screamer seat covered in black Dinamica suede .9 kg Includes padded cushion and back panel £202 TP2B6SXL

Replacement headrest panel for B6 XL Screamer seat in black Dinamica suede .1 kg Padded head panel with Tillett logo £70 TP1B6SXL

NEW B6 Screamer Car Seats




The B7 is an FIA approved ultra lightweight carbon fibre version of the B6 shape weight +/- 10% The B7 is made for use with a full race harness Price

B7-44-17 carbon epoxy race car seat (FIA homologated) 3.7 Kg Floor mount £1,913 B7-44CAR


The B7-40-17 is the same seat as above with the rolled edge cut to fit between a narrow gearbox centre consol and door sill

B7-40-17 carbon epoxy race car seat (FIA homologated) 3.7 kg Floor mount "rolled edges cut off" £1,913 B7-40CAR




B3.5 Car Seats

The B3.5 is a cut back inner skin of the B4 with a reclined driving position The B3.5 is for ultra narrow cars

B3.5 Carbon GRP car seat 2.1 Kg This seat needs special brackets made to fit each vehicle £395 B3.5-40C/GRP

Single skin shell 40 cm wide but will flex in. Critical point at the front is 30 cm. Uncovered (includes headrest pad)

B3.5 black GRP car seat 2.1 Kg This seat needs special brackets made to fit each vehicle £331 B3.5-40GRP


Two panel set for the B3.5 seat covered in black Dinamica suede .9 kg Includes padded cushion and back panel £202 TP2B3.5

Replacement headrest panel for B3.5 seat in black Dinamica suede .1 kg Padded head panel with Tillett logo £70 TP1B3.5

B6.5 Car Seats

The B6.5 is a cut back inner skin of the B6 Screamer with a standard saloon car driving position The B6.5 is for ultra narrow cars

B6.5 Carbon GRP car seat 2.1 Kg This seat needs special brackets made to fit each vehicle £395 B6.5-40C/GRP


B6.5 black GRP car seat 2.1 Kg This seat needs special brackets made to fit each vehicle £331 B6.5-40GRP


Two panel set for the B6.5 seat covered in black Dinamica suede .9 kg Includes padded cushion and back panel £202 TP2B6.5

Replacement headrest panel for B6.5 seat in black Dinamica suede .1 kg Padded head panel with Tillett logo £70 TP1B6.5

B7 Car Seats




The W1i is a low back version of the B6 weight +/- 10% No headrest on W1i seats Price

W1i-44 seat in carbon/GRP 1.88 kg This seat needs special brackets made to fit each vehicle £261 W1I-44C/GRP

Single skin shell 44 cm wide at critical point between the gearbox tunnel and door sill Uncovered

W1i-44 seat in GRP 1.98 kg This seat needs special brackets made to fit each vehicle £215 W1I-44GRP


W1i-44 seat in carbon/GRP with back frame 3.5 kg Direct floor mount, self supporting rigid structure £416 W1I-44C/GRPBF

Double skin shell 44 cm wide at critical point between the gearbox tunnel and door sill Uncovered

W1i-44 seat in GRP with back frame 3.6 kg Direct floor mount, self supporting rigid structure £369 W1I-44GRPBF


The W1i-40 is the same seat as above with the rolled edge cut to fit between a narrow gearbox centre consol and door sill

W1i-40 seat in carbon/GRP 1.88 kg This seat needs special brackets made to fit each vehicle £261 W1I-40C/GRP

Single skin shell 40 cm wide at critical point between the gearbox tunnel and door sill. Uncovered

W1i-40 seat in GRP 1.98 kg This seat needs special brackets made to fit each vehicle £215 W1I-40/GRP


W1i-40 seat in carbon/GRP with back frame 3.5 kg Direct floor mount, self supporting rigid structure £416 W1I-40C/GRPBF


W1i-40 seat in GRP with back frame 3.6 kg Direct floor mount, self supporting rigid structure £369 W1I-40/GRPBF


Two panel set for the W1i seat covered in black Dinamica suede .9 kg Includes padded cushion and back panel £202 TP2W1I

Half covered In Tillett kart seat fabric (No cover in the base for open top cars) Add .3 kg Red, Black, Blue, Charcoal Grey £106 TP5W1I

Fully covered in Tillett Kart seat fabric Add .4 kg Red, Black, Blue, Charcoal Grey £106 TP4W1I

Add one of the following onto the end of the product code for cover colour choice RED, BLK, BLU, GRE Add text to product code

W1K Car seats

The W1K is a carbon Kevlar ultra lightweight low back version of the B6 No headrest on W1K seats

W1K-44 carbon KEVLAR car seat 1.2 Kg This seat needs special brackets made to fit each vehicle £414 W1K-44KEV


W1K-44 carbon KEVLAR car seat with back frame 2.4 kg Direct floor mount, self supporting rigid structure £566 W1K-44KEVBF


W1K-40 carbon KEVLAR car seat 1.2 Kg This seat needs special brackets made to fit each vehicle £414 W1K-40KEV


W1K-40 carbon KEVLAR car seat with back frame 2.4 kg Direct floor mount, self supporting rigid structure £566 W1K-40KEVBF


Two panel set for the W1K seat covered in black Dinamica suede .9 kg Includes padded cushion and back panel £202 TP2W1i

Half covered In Tillett kart seat fabric (No cover in the base for open top cars) Add .3 kg Red, Black, Blue, Charcoal Grey £106 TP5W1i

Fully covered in Tillett Kart seat fabric Add .4 kg Red, Black, Blue, Charcoal Grey £106 TP4W1i


W2 Car seats All prices in UK pounds (Excluding VAT on UK sales)

The W2 is a wider hand made version of the W1i for drivers over 100kg No headrest on W2 seats

W2K carbon KEVLAR car seat 1.2 Kg This seat needs special brackets made to fit each vehicle £414 W2K-44.5KEV

Single skin shell 44.5 cm wide at critical point between the gearbox tunnel and door sill Uncovered

W2K carbon KEVLAR car seat with back frame 2.4 kg Direct floor mount, self supporting rigid structure £566 W2K-44.5KEVBF

Double skin shell 44.5 cm wide at critical point between the gearbox tunnel and door sill Uncovered

W2 GRP car seat 2 kg This seat needs special brackets made to fit each vehicle £212 W2-44.5GRP

Single skin shell 44.5 cm wide at critical point between the gearbox tunnel and door sill Uncovered

W2 GRP car seat with back frame 3.6 kg Direct floor mount, self supporting rigid structure £368 W2-44.5GRPBF

Double skin shell 44.5 cm wide at critical point between the gearbox tunnel and door sill Uncovered

Additional cost covering options. Please add to seat costTwo panel set for the W2 seat covered in black Dinamica suede .9 kg Includes padded cushion and back panel £202 TP2W2

Half covered In Tillett kart seat fabric (No cover in the base for open top cars) Add .3 kg Red, Black, Blue, Charcoal Grey £106 TP5W2

Fully covered in Tillett Kart seat fabric Add .4 kg Red, Black, Blue, Charcoal Grey £106 TP4W2


W1i Car Seats




The W3 is a seat with a driving angle for a Formula single seater weight +/- 10% No headrest on W3 seats Price

W3K-44 carbon KEVLAR epoxy car seat 1.2 Kg This seat needs special brackets made to fit each vehicle £427 W3K-44KEV

Single skin shell 44 cm wide at critical point around the top of the leg area Uncovered

W3K-44 carbon KEVLAR epoxy car seat with back frame 2.4 kg Direct floor mount, self supporting rigid structure £583 W3K-44KEVBF

Self supporting rigid structure 44 cm wide at critical point around the top of the leg area Uncovered

W3-44 GRP car seat 2 kg This seat needs special brackets made to fit each vehicle £225 W3-44GRP


W3-44 GRP car seat with back frame 3.6 kg Direct floor mount, self supporting rigid structure £392 W3-44GRPBF


The W3-40 is the same seat as above with the rolled edge cut to fit between a narrow gearbox centre consol and door sill

W3K-40 carbon KEVLAR epoxy car seat 1.2 Kg This seat needs special brackets made to fit each vehicle £427 W3K-40KEV


W3K-40 carbon KEVLAR epoxy car seat with back frame 2.4 kg Direct floor mount, self supporting rigid structure £583 W3K-40KEVBF


W3-40 GRP car seat 2 kg This seat needs special brackets made to fit each vehicle £225 W3-40GRP


W3-40 GRP car seat with back frame 3.6 kg Direct floor mount, self supporting rigid structure £392 W3-40GRPBF


Two panel set for the W3 seat covered in black Dinamica suede .9 kg Includes padded cushion and back panel £202 TP2W3




W4 Car SeatsThe W4 is a wider version of the W3 for drivers over 100 kg No headrest on W4 seats

W4K carbon KEVLAR car seat 1.2 Kg This seat needs special brackets made to fit each vehicle £427 W4K-44.5KEV

Single skin shell 44.5 cm wide at critical point between the gearbox tunnel and door sill. Uncovered

W4K carbon KEVLAR car seat with back frame 2.4 kg Direct floor mount, self supporting rigid structure £583 W4K-44.5KEVBF

Double skin shell 44.5 cm wide at critical point between the gearbox tunnel and door sill. Uncovered

W4 GRP car seat 2 kg This seat needs special brackets made to fit each vehicle £225 W4-44.5GRP

Single skin shell 44.5 cm wide at critical point between the gearbox tunnel and door sill. Uncovered

W4 GRP car seat with back frame 3.6 kg Direct floor mount, self supporting rigid structure £392 W4-44.5GRPBF

Double skin shell 44.5 cm wide at critical point between the gearbox tunnel and door sill. Uncovered





New W5 Car SeatsThe W5 is a single skin handmade seat with a driving angle between the W1 and the W3 No headrest on W5 seats

W5K carbon KEVLAR car seat 1.2 Kg This seat needs special brackets made to fit each vehicle £427 W5K-44KEV


W5 GRP car seat 2 kg This seat needs special brackets made to fit each vehicle £225 W5-44GRP






New W6 Car SeatsThe W6 is a wider version of the W5 for drivers over 100 kg No headrest on W6 seats

W6 carbon KEVLAR car seat 1.2 Kg This seat needs special brackets made to fit each vehicle £427 W6K-47KEV

Single skin shell 47cm wide at critical point between the gearbox tunnel and door sill. Uncovered

W6 GRP car seat 2 kg This seat needs special brackets made to fit each vehicle £225 W6-47GRP

Single skin shell 47cm wide at critical point between the gearbox tunnel and door sill. Uncovered

Additional cost covering options. Please add to seat cost





W3 Car Seats



Approximate Description weight +/- 10% Hole centres Finish Price Part Number

TR1 : Seat adjustment runners, double locking 1.38 kg 31.5 Chemi Black £94 TR1

Side mount brackets also needed to connect to B1, B2, B4, B5, B6 F, B6F XL and B7

TK5 : Enables a TR1 runner set to be fitted to a bottom mounted B6 seat, or the W1i, W3 or W4 with backframe 215g £16 TK5

TR2 : Seat adjustment runners, double locking with a wider handle than the TR1 1.38 kg 31.5 Chemi Black £94 TR2

Side mount brackets also needed to connect to B1, B2, B4, B5, B6 F, B6F XL and B7

Warning: It is not recommended to use any type of adjustment seat runners in a race car Weight

M8 Aluminium countersunk washer Anodised Black and specially made for fitting a composite seat 3 g £0.92 TW1

Anodised Black and low profile for single skin seat fitting (Should be used with a minimum strength 10.9 countersunk socket set screw)

40 mm diameter aluminium seat spacer Aluminium seat spacer for a solid mounting between seat and bracket 1 g £0.92 TW10

40 mm diameter aluminium seat spacer with slot support peg Strengthens the bracket where angle adjustment slots are used on a car seat bracket 3 g £0.36 TW3

Nylon Ø40mm x 2mm thick seat spacer Nylon washer that stops seat stay penetration and provides spacing adjustment to brackets 3 g £0.36 TW3







M8 four bolt seat fitting kit Contains 4 bolt sets to fit a single skin composite seat to mounting points. 125 g £8.48 TK1

Contains 4 bolt sets to fit a single skin W1i, W2, W3, W5 and W6 shell, B3.5 or B6.5 car seat

M8 four bolt seat fitting kit with plates 4 bolt sets plus 2 x aluminium reinforcing plates and rivets 176 g £14.58 TK2

4 bolt sets plus 2 x aluminium reinforcing plates and rivets

Seat spacer kit Ø40mm 20 Nylon washers Contains 10 x 2mm and 10 x 4 mm x Ø40mm diameter washers 92 g £9.36 TK3

Seat spacer kit Ø51mm 20 Nylon washers Contains 10 x 2mm and 10 x 5 mm x Ø51mm diameter washers 178 g £9.36 TK4

Aluminium seat reinforcing plates 75 x 75mm Natural Aluminium seat plate used for support when drilling multiple holes in light seats 21 g £3.66 TK7

Low profile stainless steel washer and bolts Contents

Comprehensive 8 bolt Ultra low profile stainless steel seat fitting kit Includes 4 x M8 x 25mm, 2 x 30mm and 2 x 70 mm low profile bolt / washer sets 340 g £52.36 TLPK1

Use to fit a single skin shell without leaving uncomfortable bolt heads inside the seating surface Plus ten 40mm diameter x 2 mm thick and ten 40mm x 4 mm thick nylon spacers

Ultra low profile washer 1 x special low profile washer 9g £3.66 TLPW1

Needs modified bolt to be totally effective as standard countersink bolts bottom out

Ultra low profile bolt 25 mm 1 x special M8 x 25mm countersunk bolt 10 g £2.48 TLPB25

Ultra low profile bolt 30 mm 1 x special M8 x 30mm countersunk bolt 12 g £2.51 TLPB30

Ultra low profile bolt 40 mm 1 x special M8 x 40mm countersunk bolt 15g £2.70 TLPB40




Runners and Fittings



Approximate

Description weight +/- 10% Compatible with Price Part Number

TB F1 : Aluminium bracket set for the B6F, B6 F XL, B6XL and B7 1.2 kg B6 F, B6FXL, B6XL, B7 Anodised Black £136 TBF1Inward pointing high quality brackets, designed to mount a seat as low as possible. 6 mm thick B6 with side mount option

TB F5 : Aluminium bracket set for the B6F, B6 F XL, B6XL and B7 1.2 kg B6 F, B6FXL, B6XL, B7 Anodised Black £136 TBF5Outward pointing high quality brackets, designed to mount a seat as low as possible. 6 mm thick B6 with side mount option

TB1 : Aluminium bracket set for the B1, B2 or B4 seats 1.11 kg B1, B2, B4 Powder Black £91 TB1Inward pointing and designed to mount base of seat as low as possible. 5 mm thick

TB2 : Aluminium bracket set for the B5 seat 1.16 kg B5 Powder Black £91 TB2Designed to fit the B5 seat as low as possible whilst at the same time mounting it on top of runners. 5 mm thick

TB3 : Aluminium bracket set to fit the B5 1.36 kg B5 Powder Black £91 TB3Designed to mount base of a B5 seat as low as possible to a flat floor. 5 mm thick

TB4 : Extra tall aluminium bracket set for the B1, B2 or B4 seats 1.5 kg B1, B2, B4 Powder Black £91 TB4Inward pointing. Designed to be used to lift the seats to a regular saloon car driving height. 5 mm thick

TB5 : Aluminium bracket set for the B6F, B6 F XL, B6XL and B7 seats 1.11 kg B6 F, B6FXL, B6XL, B7 Powder Black £91 TB5Outward pointing designed to mount the seat as low as possible. 5 mm thick B6 with side mount option

TB FIA : Machined from solid aluminium bracket made to fit the B6F, B6 F XL, B6XL and B7 1.3 kg B6 F, B6FXL, B6XL, B7 Lacquered Aluminium £415 TB FIAO2A2 degree from vertical, super strong bracket which has been tested during 8855-1999 FIA tests B6 with side mount option Anodised Black £415 TB FIAO2B

TB FIA8 : Machined from solid aluminium bracket made to fit the B1, B2 and B4 1.3 kg B1, B2, B4 Lacquered Aluminium £415 TBFIAO8A8 degree version of the TB FIA £415 TBFIAO8B

TB FIA Lifting Spacer : Machined to nest into TB FIA bracket. 1.3 kg TBFIA Lacquered Aluminium £143 TBFIASSuper strong spacer set that lifts TB FIA 24 mm and can be stacked to lift 48 mm.

Elise/Exige specific bracketsNEW 2017 model EB1 : Lotus Elise/Exige B5 steel fixed race/track brackets for the drivers side 2.2 kg B5 Powder Black £92 EB1Solid fixing but with leg length adjustment and angle adjustment. (New model includes belt mount points)

EB F1 : Lotus Elise/Exige High quality aluminium solid fix brackets originally made for the Elise drivers seat 1.2 kg B6 F, B6 Screamer, B7 Anodised Black £141 EBF1Solid fixing but with multi hole length and angle adjustment. 6 mm thick (B6F XL will not fit the Elsie/Exige) B6 with side mount option

EB2 : Lotus Elise/Exige B5 Driver side Elise brackets to fit on existing runners 1.25 kg B5 Powder Black £86 EB2Has two seat belt mounting points for the original belts. 3 mm thick steel

EB3 : Lotus Elise/Exige B5 Passenger side Elise brackets fixed position 2.6 kg B5 Powder Black £117 EB3RHDRight hand drive cars only. 3 mm thick steel

EB3 : Lotus Elise/Exige B5 Passenger side Elise brackets fixed position 2.6 kg B5 Powder Black £117 EB3LHDLeft hand drive cars only. 3 mm thick steel

Car Seat Brackets



All panels sets Include double sided tape fitting. Velcro fitting is also available to special order. Colours are an extra cost optionApproximate

Description weight +/- 10% Panel specification Colour Price Part Number

B1 Replacement Dinamica suede seat panel set 3 parts 1 kg Cushion, back and headrest Black £253 TP3B1

B1 Dinamica suede seat panel 2 parts 900 g Cushion and back panel Black £202 TP2B1

B1 Headrest panel 85g Headrest only Black £70 TP1B1




B3.5 Replacement Dinamica suede seat panel set 3 parts 1 kg Cushion, back and headrest Black £253 TP3B3.5

B3.5 Dinamica suede seat panels 2 parts 900 g Cushion and back panel Black £202 TP2B3.5

B3.5 Headrest panel 85g Headrest only Black £70 TP1B3.5


B4 Dinamica suede seat panels 2 parts 900 g Cushion and back panel Black £202 TP2B4








B6 XL Replacement Dinamica suede seat panel set 3 parts 1 kg Cushion, back and headrest Black £253 TP3B6XL

B6 XL Dinamica suede seat panel 2 parts 900 g Cushion and back panel Black £202 TP2B6XL

B6 XL Headrest panel 85g Headrest only Black £70 TP1B6XL

B6.5 Replacement Dinamica suede seat panel set 3 parts 1 kg Cushion, back and headrest Black £253 TP3B6.5

B6.5 Dinamica suede seat panel 2 parts 900 g Cushion and back panel Black £202 TP2B6.5

B6.5 Headrest panel 85g Headrest only Black £70 TP1B6.5

B6 Screamer Replacement Dinamica suede seat panel set 3 parts 1 kg Cushion, back and headrest Black £253 TP3B6S

B6 Screamer Dinamica suede seat panel 2 parts 900 g Cushion and back panel Black £202 TP2B6S

B6 Screamer Headrest panel 85g Headrest only Black £70 TP1B6S

B6 XL Screamer Replacement Dinamica suede seat panel set 3 parts 1 kg Cushion, back and headrest Black £253 TP3B6SXL

B6 XL Screamer Dinamica suede seat panels 2 parts 900 g Cushion and back panel Black £202 TP2B6SXL

B6 XL Screamer Headrest panel 85g Headrest only Black £70 TP1B6SXL


B7 Dinamica suede seat panels 2 parts 900 g Cushion and back panel Black £202 TP2B7


W1i Dinamica suede seat panel 2 parts 900 g Cushion and back panel Black £202 TP2W1I

W2 Dinamica suede seat panel 2 parts 900 g Cushion and back panel Black £202 TP2W2




W6 Dinamica suede seat panel 2 parts 900 g Cushion and back panel Black £202 TP2W6A3A2:J67A1:J67AA14:J67

Seat Panel Sets



Please note that any special panel costs quoted will be for an additional charge added to the regular panel price

Description Style Fabric type Part Number

Customer designed embroidered logo in the headrest Maximum size 120 x 60 mm Dinamica Customer choice SP

Please note that to set up an embroidered logo design there is a £60.00 one off setup charge * Please supply a suitable logo file Add instructions

Extra charge for coloured stitching and piping on Dinamica suede Straight horizontal stitching Dinamica Suede cover in black, red or blue SP

Includes stitching on back and cushion panels with matching embroidery colour Vertical piping and embroidery to match Stitching and piping in red, blue, white, yellow, green Add instructions

Extra charge for coloured diamond stitching on Dinamica suede Diamond pattern across the Dinamica Suede cover in black, red or blue SP

Includes stitching on headrest cushion panels with matching embroidery colour cushion and back panels Stitching in red, blue, white, yellow, green Add instructions

Extra charge for coloured stitching and piping on leather Straight horizontal stitching Leather Leather cover in colour of choice SP

Includes stitching on back and cushion panels. No logo on headrest Vertical piping and embroidery to match Stitching and piping in red, blue, white, yellow, green Add instructions

Extra cost for coloured diamond stitching on leather Diamond pattern across the Leather Leather cover in colour of choice SP

Includes stitching on headrest cushion panels. No logo on headrest cushion and back panels Stitching in red, blue, white, yellow, green Add instructions

Extra charge for leather sides and suede centre section Leather and Dinamica suede mix Leather / Dinamica Leather cover in colour of choice SP

Includes Leather headrest panel / without logo Leather headrest pad Dinamica suede in Red, blue or black Add instructions

Coloured gel coat

Possible on seat types Colour

Extra cost for coloured gel coat on one surface of the seat B4, B5, B6, B6XL, B6F, B6 F XL. Red, blue, white SP

Special colour pigment charge £55.00 one off fee, please supply a RAL or Pantone number Other colours on request, possibly at extra cost Add instructions

Price is affected by leather choice

P.O.A

£85.00

Price

Price

Free of Charge*

£65.00

£60.00


P.O.A


P.O.A

Car seat custom options



Description Sizes Colours Price Part Number

Tillett baseball cap embroidered with logo One size Black £18 TC01

Tillett fleece embroidered with logo front and rear XS, S, M, L, XL, XXL Black £59 TC02

Tillett hoodie printed with logo on front and rear XS, S, M, L, XL, XXL Black £51 TC03

Tillett Polo shirt printed with logo on front and rear XS, S, M, L, XL, XXL Black £18 TC04

Tillett Retro T shirt in black printed with fluorescent logo on front and rear XS, S, M, L, XL, XXL Black £26 TC05

Tillett Retro T shirt in white printed with fluorescent logo on front and rear XS, S, M, L, XL, XXL White £26 TC06

Tillett T shirt in black printed with yellow logo on front and rear XS, S, M, L, XL, XXL Black £13 TC07

Tillett T shirt in white printed with yellow logo on front and rear XS, S, M, L, XL, XXL White £13 TC08

Tillett woolly hat embroidered with logo One size Black £14 TC09

Clothing

B1 Car Seats

Documents

Transcript of B1 Car Seats