2012 YAMAHA ACCESSORIES UPDATE CATALOG

2012 YAMAHA ACCESSORIES UPDATE CATALOG

FALL 2011 EDITION

2012CONTENTS

Update for 2012 models

YZF-R1® . . . . . . . . . . . . . . . Section 1

WR®450F . . . . . . . . . . . . . . . Section 2

Zuma® 50F . . . . . . . . . . . . . . Section 3

YFZ®450 . . . . . . . . . . . . . . . Section 4

Grizzly® 700/500 . . . . . . . . . . . Section 5

Raider® SCL . . . . . . . . . . . . . Section 6

New For 2012 . . . . . . . . . . . . Section 7

Engine 1-2

Exhaust 1-3

Intake 1-6

Chassis Protection 1-6

Controls 1-8

Brakes/ Sprockets/ Chains/ Wheels 1-13

Body 1-21

Cargo 1-25

Stands/ Covers/ Security 1-25

YZF-R1

1-2

2012YZF-R1

EnginE

1. Yamaha Clutch KitThis complete Yamaha Clutch Kit includes the plates, springs, and gaskets, ready to install. Refer to service manual for installation instructions.Fits ’09~’12 R114B-W001G-00-00 $189.99

2. Right Engine CoverGraves Motorsports™ CNC-machined billet aluminum engine cover. Lasered Graves Motorsports™ “G” logo. Adds protection and style to your bike. Requires stock gasket 14B-15456-00-00, sold separately.Fits ’09~’12 R1 BlackABA-0SS56-20-53 $134.95

3. Left Engine CoverGraves Motorsports™ CNC-machined billet aluminum engine cover. Lasered Graves Motorsports™ “G” logo. Adds protection and style to your bike. Requires stock gasket 14B-15451-00-00, sold separately.Fits ’09~’12 R1BlackABA-0SS56-20-52 $249.95

4. Smog Block-Off PlatesDesigned to seal off the ports on the valve cover used by the air injection system. Once these are capped off, the air injection system can be safely removed. These Smog Block-Off Plates are made from CNC-machined billet alu-minum and feature the Graves Motorsports™ “G” logo. For closed-course competition only (see Notice below).Fits ’04~’12 R1ABA-0SS56-20-70 $36.95

1

2 3

4

1-3

EXHAUST

FuLL SYStEmS

5. Full “Low mount” Exhaust SystemFor the rider that is looking for something a little differ-ent, the stainless steel Low Mount Exhaust. This system features mandrel-bent stainless tubing, billet aluminum flanges, and our full carbon fiber side exit silencer. It is extremely light yet offers the amazing horsepower increases Graves Motorsports™ is known for. An O2 bung (with plug) is provided for use with the stock Yamaha O2 Sensor or the Dynojet® AutoTune module which allows for live, closed-loop EFI tuning. Graves-spec packing produces an exhaust note like no other and holds up longer to the extreme conditions of a high-revving motorcycle. This full exhaust system delivers exactly what this revolutionary R1 deserves: big power, lasting durability, style, and sound. System gives an overall weight savings of 15 lb. compared to stock exhaust system.For closed-course competition only (see Notice below).Fits ’09~’12 R1a Stainless Steel/ Carbon Fiber ABA-0SS56-20-88 $1,549.99b “Show Stopper” Stainless Steel/ Carbon Fiber* ABA-0SS56-22-33 $1,649.95

6. Full Exhaust SystemsThe Graves Motorsports™ Full Exhaust Systems offer class-leading performance. All systems offer significant weight savings compared to stock. Systems reduce engine operating temperature. These systems have a race-bike type appearance and are designed for serious racers and track day enthusiasts.NOTE: If the EXUP™ System is being eliminated, it is recommended that the Graves Motorsports™ EXUP Eliminator (ABA-0SS56-21-65), sold separately, be installed to prevent activation of the check engine light.For closed-course competition only (see Notice below).Fits ’09~’12 R1Stainless Steel/ Carbon FiberABA-0SS56-20-86 $1,994.95

NOTICE:Graves Motorsports™ products are intended for racing motorcycles only and are not applicable for use on pollution-controlled street/ highway vehicles. Graves Motorsports™ products are sold for show or closed-course competition only.

* This exhaust is a special order item. Expected delivery takes approximately 1~2 weeks.

5a 5b

6

1-4

2012YZF-R1

1

NOTICE:Graves Motorsports™ products are intended for racing motorcycles only and are not applicable for use on pollution-controlled street/ highway vehicles. Graves Motorsports™ products are sold for show or closed-course competition only. * This exhaust is a special order item. Expected delivery takes approximately 1~2 weeks.

2

1. Complete Evolution Exhaust SystemsThis is the flagship of the Akrapovic® “Evolution” Exhaust System line-up, used and tested by top factory teams in Motorsports racing. It is simply the finest exhaust system available. Each model is unique and dedicated to maximiz-ing the performance of an engine, while reducing overall weight for optimized handling of the whole motorcycle. Systems feature the Akrapovic®/Yamaha Racing badge on muffler can.NOTE: If the EXUP System is being eliminated, it is recommended that the Graves Motorsports™ EXUP Eliminator (ABA-0SS56-21-65), sold separately, be installed to prevent activation of the check engine light.For closed-course competition only (see Important Note below).Fits ’09~’12 R1 Carbon Fiber Can/Carbon Fiber End Cap/ Titanium Headers with Crossover TubesABA-0SS56-21-63 $3,449.95Titanium Can/End Cap/ Headers with Crossover TubesABA-0SS56-21-64 $3,449.95Carbon Fiber Can/ Carbon Fiber End Cap/ Titanium Headers(shown) ABA-0SS56-21-61 $3,299.95Titanium Can/End Cap/ HeadersABA-0SS56-21-62 $3,299.95

Cat. ELiminatOR SYStEmS

2. Cat. Eliminator Exhaust SystemThe Graves Motorsports™ Cat. Eliminator Exhaust System is a perfect mix of form and function. Eliminating the catalytic converter from the stock exhaust removes significant weight, reduces stored up exhaust heat, and increases the flow of exhaust gases. When all of these factors are combined it equals POWER. It features mandrel-bent tubing and silencers with tapered conical outlets. An O2 bung (with plug) is provided for use with the stock Yamaha O2 sensor. Graves-spec packing produces an exhaust note like no other and holds up longer to the extreme conditions of a high-revving motorcycle.NOTE: If the EXUP System is being eliminated, it is recommended that the Graves Motorsports™ EXUP Eliminator (ABA-0SS56-21-65), sold separately, be installed to prevent activation of the check engine light.For closed-course competition only (see Notice below).Fits ’09~’12 R1Stainless Steel/Carbon Fiber (shown)ABA-0SS56-20-92 $1,649.99Titanium/Carbon FiberABA-0SS56-20-97 $1,899.99“Show Stopper” Stainless Steel/Carbon Fiber*ABA-0SS56-22-32 $1,699.95

1-5

3

Important Note:All street-legal motorcycle models are regulated by the EPA and state law. This accessory affects emissions and is for closed-course competition only. Use on public roads constitutes illegal tampering and punishable by law.

4

5

SLiP-On SYStEmS

3. GYtR® Carbon Fiber Dual Slip-On mufflers Provides a significant increase in power throughout the rpm range with a 4-hp maximum gain while providing up to a 2 ft-lb increase in torque. Carbon fiber muffler shell with brushed stainless steel inlet pipe and end cap. Billet alumi-num muffler mounts. Completely rebuildable. 2.4 pounds lighter than stock. Meets 2011 AMA® sound requirements.For closed-course competition only (see Important Note below).Fits ’09~’12 R1 14B-E47A0-V0-00 $999.95

4. “Cat. Back” Slip-On Exhaust SystemThe Graves Motorsports™ “Cat. Back” Slip-On Exhaust System is handcrafted here in the U.S.A. The exhaust system features mandrel-bent tubing and silencers with tapered conical end caps. Systems offer a weight reduction compared to stock exhaust systems.For closed-course competition only (see Notice below).Fits ’09~’12 R1Stainless Steel/Carbon Fiber ABA-0SS56-20-90 $1,399.99

5. GYtR Carbon Fiber Heat ShieldsThese carbon fiber shields simply replace stock. Makes a stylish addition when installed with slip-on mufflers. Fits ’09~’12 R1 14B-F74D0-V0-00 $599.95

1-6

2012YZF-R1

1

2

4

INTAKE

1. GYtR R1 High Flow air FilterOffers increased air flow and excellent filtration for perfor-mance applications. Washable and reusable. Service with Genuine Yamaha Gauze Filter Cleaner and Filter Oil, both available from your Yamaha dealer.Fits ’09~’12 R114B-E41D0-V0-00 $79.95

CHASSIS PROTECTION

2. GYtR R1 Frame Slider ProtectorsHelps protect the frame and bodywork on a low-side fall. (Set of 2.)Fits ’09~’12 R1 14B-F11D0-V0-00 $104.95

3. Frame SlidersFrame sliders are designed to help protect frame and bodywork in the event of a low-side fall. Do not require any bodywork modification to install. Includes all mounting hardware. (Set of 2.)WhiteFits ’09~’12 R1DBY-ACC56-23-41 $144.95

4. Long Puck Frame Sliders Frame sliders are designed to help protect frame and bodywork on a low-side fall. Do not require any bodywork modification to install. Includes all mounting hardware. (Set of 2.)Fits ’09~’12 R1BlackABA-0SS56-21-76 $144.95White (shown)ABA-0SS56-21-78 $144.95

3

1-7

5. Spindle ProtectorDeveloped by Harris Performance Products Ltd., this front spindle protector greatly aids in reducing the risk of expen-sive front end damage in the event of a fall or tip over.Fits ’07~’12 R1GYT-14B55-50-25 $84.95

6. Yamaha R1 tank PadsHelp protect your gas tank from nicks and abrasions caused by belt buckles, snaps, or zippers.Fits ’09~’12 R1a Brushed Metal Look14B-F41D0-T0-00 $32.95b Carbon Fiber Look14B-F41D0-V0-00 $32.95c Red Carbon Fiber Look14B-F41D0-U0-00 $34.95d White14B-F41D0-S0-00 $32.95

7. Yamaha Fuel Cap accentsAdd this to your fuel cap for a custom look.Fits ’98~’12 R1Carbon Fiber LookGYT-5SL49-28-CF $24.95

5

6b

6a

6d

6c

7

1-8

2012YZF-R1

Controls

1. Steering StabilizerGPR® steering stabilizers are all billet machined from the finest alloys. The patented “pin-less” mounting brackets eliminate any slop that might normally exist with the traditional aftermarket pin-and-slot mounting systems. All stabilizers come with a limited lifetime warranty from GPR®.Fits ’09~’12 R1ABA-0SS56-22-73 $495.95

2. unbreakable Pivoting Levers C/5 Sport Series Levers by ASV Inventions®. Unbreakable, with a 5-year guarantee to the original owner from the manufacturer. Provides tool-less micro-adjustable reach (about 180 clicks for 4 inches of adjustability), stainless steel bushing at pivot, and a chrome-silicon high-tension spring. CNC-machined from 6061 billet aluminum. Made in U.S.A.Fits ’04~’12 R1 Stealth Blacka Brake LeverABA-0SS56-20-23 $139.95b Clutch LeverABA-0SS56-20-24 $139.95Yamaha Blue – Yamaha Exclusive!c Brake LeverABA-13S55-50-26 $129.95d Clutch LeverABA-13S55-50-28 $129.95

1

2a

2c

2b

2d

1-9

3. unbreakable Pivoting “Shorty” Levers C/5 Sport Series “Shorty” Levers by ASV Inventions®. Unbreakable, with a 5-year guarantee to the original owner from the manufacturer. Provides tool-less micro-adjustable reach (about 180 clicks for 4 inches of adjustability), stainless steel bushing at pivot, and a chrome-silicon high-tension spring. CNC-machined from 6061 billet aluminum. Made in U.S.A.Fits ’04~’12 R1 Stealth Blacka Clutch LeverABA-0SS56-22-40 $139.95b Brake LeverABA-0SS56-22-39 $139.95Yamaha Blue – Yamaha Exclusive!c Clutch LeverABA-13S55-50-29 $129.95d Brake LeverABA-13S55-50-27 $129.95

4. Road Race Pivoting LeversDeveloped by Harris Performance Products Ltd., from their direct involvement in racing, these levers are designed to flip up in the event of a fall, thus reducing the chance of a lever breaking. Brake lever is equipped with an adjuster knob to facilitate span adjustment to enhance rider comfort and lever performance. Manufactured from the highest quality materials. Direct replacement for the standard equipment.Black a Pivoting Brake Lever* Fits ’04~’12 R1GYT-0SS55-50-72 $174.95b Pivoting Clutch LeverFits ’98~’12 R1GYT-0SS55-50-73 $174.95*NOTE: Master cylinder activator pin must be replaced with shorter pin for use on ’09~’12 R1. Shorter pin is included with lever assembly. Simply pull out the long pin and replace with the shorter pin.

3a

3c

3d

3b

4b

4a

1-10

2012YZF-R1

1. Replacement Levers for Clutch & Brake CNC-machined from billet aluminum, these levers replace the stock brake and clutch levers and are fully adjustable including a unique design that allows the levers to be closer or further from your handlebars to suit you and your riding style. The hinged points allow the levers to break away to prevent damage in the event of a tip over. Fits ’04~’12 R1 Replacement Brake LeverABA-0SS56-23-34 $99.99Replacement Clutch LeverABA-0SS56-23-33 $99.99

2. RCS Folding Clutch LeverMechanical clutch lever assembly machined entirely from billet. Lever boss has special geometry. Plug-and-play design ensures the lever can mount directly to the original arm lever assembly. Similar in all respects to the 19 RCS Master Cylinder with laser-imprinted Brembo® Racing logo and the famous tri-color flag on the lever boss.Fits ’02~’12 R1ABA-0SS56-23-31 $164.95

3. Clip-On HandlebarsCNC-machined, 7075-T6, billet aluminum, 50mm clamps have superior strength and rigidity. These clip-on bars are the choice of many AMA® factory race teams as well as privateers. The clip-on tubes are angled 7° down for excel-lent rider control without a sacrifice in comfort. BlackFits ’99~’12 R1DBY-ACC56-23-46 $214.95

R

4. Clip-On BarsVortex® Clip-Ons are strong, light, and adjustable. They are machined from solid billet aluminum with removable handlebar tubes, so in the event of a crash you simply replace the handlebar tube instead of the entire handle-bar. Clip-Ons sit at a 7° angle, giving racers and street riders the ultimate position for rider comfort and leverage. Stainless steel fasteners and Delrin® plastic ends add the finishing touch.Fits ’98~’12 R1BlackABA-0SS56-21-97 $164.95GoldABA-0SS56-21-98 $164.95SilverABA-0SS56-21-99 $164.95

3

1

2

4

1-11

5. R1 Grips These duo-density rubber grips feature the R1 logo and reduce rider fatigue for increased comfort.Fits ’98~’12 R1Black14B-F62B0-V0-00 $19.95Blue 14B-F62B0-U0-00 $19.95White14B-F62B0-T0-00 $19.95

6. Yamaha Bar EndsThese handlebar ends are CNC-machined, aluminum anodized, and feature a carbon fiber inlay. These bar ends incorporate weights to mimic the stock weight so that vibration is kept at a minimum. Helps protect handlebars in the event of a fall.Fits ’98~’12 R1 Black14B-F62C0-V0-00 $49.95Blue14B-F62C0-U0-00 $49.95Red14B-F62C0-T0-00 $49.95

7. Bar EndsThese billet aluminum bar ends are designed to fit the stock handlebars for the Yamaha Sportbike models listed below. Sold in pairs. Fits ’04~’12 R1a AluminumABA-0SS56-20-54 $39.95b BlackABA-0SS56-20-55 $39.95

8. adjustable Rear Sets These “factory style” footrest kits were developed on the race track by Harris Performance Products Ltd. These are the racer’s choice and are fitted to many of the world’s leading race bikes. Kits are CNC-machined from solid 6082 T6 billet aluminum. Standard shift pattern is the same as the road version. Levers run on self-lubricating bearings and the lever position is adjustable on rod-end spherical bearings. Foot peg position is variable back and/or up from standard by means of a matrix.AluminumFits ’09~’12 R1 ABA-0SS56-20-94 $699.95

5

6 7a

7b

Replacement Harris Components(Not shown)Replacement Foot PegReplacement foot peg for Harris Adjustable Rear Set (ABA-0SS56-20-94). Replacement foot peg for brake side only on ’09~’12 R1. ABA-0SS56-22-75 $79.95Replacement foot peg for Harris Adjustable Rear Set (ABA-0SS56-20-94). Replacement foot peg for shifter side only on ’09~’12 R1.ABA-0SS56-22-76 $79.95Replacement Folding Toe SpigotReplacement toe spigot for Harris Adjustable Rear Set (ABA-0SS56-20-94). Replacement toe spigot for both shifter and brake sides on ’09~’12 R1.ABA-0SS56-22-78 $24.95

8

1-12

2012YZF-R1

1. adjustable Rear Set for R1These rear sets feature billet aluminum construction, M1 foot pegs, double roller bearings in the brake and shifter pivots, and left-side carbon fiber heel guard. Includes shift rod and shift knuckle. Our unique adjustable M1 foot pegs offer excellent grip via the large CNC-machined “teeth” and comfort due to their large contact patch and ability to be rotated to any desired angle. The lever tips are collapsible and feature a high-grip rubber cover for positive grip and feel when shifting and braking. The carbon fiber heel guard is designed to be functional as well as look great. The right side is an optional upgrade (purchased separately). Their sturdy, lightweight construction makes them last, even when digging your heels into them. Rider can select from either reverse or standard shift pattern by rotating the stock shift knuckle on the shift shaft. In order to use a Dynojet® Speed Shifter you will need to use the Dynojet® Ignition Module along with the Power Commander® (PC) III USB. If you are using reverse shift, you will need to order the Shift Rod Tension Sensor (Pull Type) and 246mm Shift Rod. If you are using standard shift, you will need to order the Shift Rod Tension Sensor (Push Type) and 246mm Shift Rod. See your Yamaha dealer or go to gravesport.com for optional equipment.Fits ’09~12 R1ABA-0SS56-20-59 $749.95

R

2. Rear SetsVortex® rear sets are CNC-machined from solid, lightweight billet aluminum and finished with a black anodize for looks and durability. Built with professional racing in mind, these rear sets are designed to provide top-notch clearance, trac-tion, positioning, and control. They are fully adjustable for clearance and comfort and the dual bearings in each lever of-fer precision shifting and braking. Tested and used by AMA® Superbike teams. Race grip foot pegs offer excellent traction.Fits ’09~’12 R1 BlackABA-0SS56-22-06 $418.95

Rear Set Brake Switch (Not shown) For street use with rear sets that do not accommodate stock brake switch. Fits ’04~’12 R1ABA-0SS56-23-27 $22.95

3. Rear Brake Return SpringThis billet aluminum spring plate and spring install easily onto the rear brake master cylinder rod and keep the brake pedal pushed up. Fits all R1 models with stock or aftermarket rear setsDBY-ACC56-23-52 $19.95

1

2

3

1-13

BRAKES/ SPROCKETS/ CHAINS/ WHEELS

4. HPK Full Floating Discs KitThese full-floating, 310mm diameter front discs are manufactured from 5.5mm-thick, high-strength stain-less steel. The braking surface has a drill pattern that has been optimized for maximum performance; the discs are then mounted on billet anticorodal carrier using a racing floating-mount design. Direct replacement for stock discs.Fits ’07~’12 R1ABA-0SS56-22-42 $660.00

5. Radial CnC Caliper Kit Calipers are CNC-machined from aerospace-grade billet aluminum with 2 x 30mm and 2 x 34mm pistons. 108mm radial fixing centers. Surfaces are hard-anodized to achieve close working tolerances for unsurpassed performance and accuracy. This two-caliper kit comes complete with sintered pads for street or race use and is a direct replace-ment for the stock radial calipers. Includes thermo-tape caliper stickers, spacers, screws, and complete installa-tion instructions. Requires installation of 19 RCS Master Cylinder (ABA-0SS56-22-41), sold separately.Fits ’07~’12 R1ABA-0SS56-22-45 $1,645.00

6. Radial CnC Caliper Kit Calipers are nickel-coated and CNC-machined from aerospace-grade billet aluminum with 2 x 30mm and 2 x 34mm pistons. To be used with 310mm discs. This two-caliper kit comes complete with sintered pads for street or race use and is interchangeable with the stock radial calipers. Includes thermo-tape caliper stickers, spacers, screws, and complete installation instructions. Requires installation of 19 RCS Master Cylinder (ABA-0SS56-22-41), sold separately.Fits ’07~’12 R1 (130mm radial fixing centers)ABA-0SS56-23-28 $1,945.00

7. Rear CnC Caliper Kit This caliper is CNC-machined from aerospace-grade billet aluminum. Surfaces are hard-anodized to achieve close working tolerances for unsurpassed performance and accuracy. The billet caliper support relocates the caliper be-low the axle to lower the center of mass and allow for easy wheel removal. The kit, which is compatible with the stock disc, replaces the stock caliper and comes complete with sintered pads for street or racing use. Includes thermotape caliper stickers and complete installation instructions. Fits ’07~’12 R1ABA-0SS56-22-46 $759.00

4

5

6

7

1-14

2012YZF-R1

1. 19 RCS master Cylinder This master cylinder has a hard-anodized forged aluminum alloy body with a MotoGP®-inspired piston assembly. The patented RCS device allows the brake lever ratio to be ad-justed for either race or street applications. A micro-switch is included for brake light operation along with complete installation instructions. Fits ’07~’12 R1ABA-0SS56-22-41 $365.00

2. 19 RCS Remote adjuster KitTo be used with 19 RCS Master Cylinder (ABA-0SS56-22- 41), sold separately. Patented C.B.W. (Click by Wire) sys-tem. Special twist cable in PVC tube. Lever span adjuster incorporated into the torque transmission flange; includes a machined, billet aluminum clevis mount on the clutch side of the handlebar. Special knob shape helps provide a secure grip.Fits ’07~’12 R1ABA-0SS56-23-30 $223.00

3. Radial master Cylinder Cam ControlThe radial design means less lever force and greater power and feel, for outstanding overall brake feeling and stopping power, reducing lap times. Forged aluminum construction provides excellent strength and durability. Now features a folding lever with cam control technology. The master cylinder uses the stock reservoir.Fits ’07~’12 R1ABA-0SS56-23-32 $349.99

4. Sintered Brake Pads – Street CompoundAn advanced formulation and sintering process has yielded brake pads designed for sport riding that offer fade-resistant performance and quick cool down under severe braking. These pads are rotor friendly, providing stable performance under wet or dry conditions with no break-in time required. Available for both front and rear applications.FrontFits ’07~’12 R1ABA-0SS56-23-37 $59.99RearFits ’04~’12 R1ABA-0SS56-23-40 $43.99

1

2

3

4

1-15

6a

6b

5a 5b5. “Superbike Pro” Brake Line KitsThese high-performance kits were developed working alongside AMA® Factory Race Teams on the track and in the race shop. These brake lines provide the same benefits top AMA® riders achieve through traditional Superbike line routing. Benefits include tighter tolerances, which increase clearance at the master cylinder, fork leg, and gauge cluster areas, and a more precise fit by routing the lines directly to the calipers. In addition to the powerful braking perfor-mance characteristic in all Goodridge® products, these premium kits simplify installation, providing the unique and unmistakable look of “Superbike” routed brake lines. Not DOT approved. For closed-course competition only.NOTE: Goodridge® “Superbike Pro” brake lines were specifically developed for use with the Brembo® calipers available through Yamaha Parts & Acces-sories (see page 1-13). Not compatible with stock calipers unless all three stock banjo bolts are used.

Fits ’09~’12 R1 a Front Brake Line KitABA-0SS56-22-55 $134.95b Rear Brake Line KitABA-0SS56-22-56 $54.95

6. Race-Routed Brake Line KitsBlack PVC-coated, PTFE-lined, stainless braided hose and black zinc-plated mild steel fittings and bolts. The clear PVC cover provides abrasion protection and simplifies cleaning. The PTFE inner liner is an inert material, which is compatible with all brake and clutch fluids. Kits bypass the brake tee, routing both lines directly to the calipers from the master cylinder, fastening at the master cylinder with the provided double banjo bolt. Benefits are reduced weight and simplified installation. Not DOT approved. For closed-course competition only.NOTE: Goodridge® “Race-Routed” brake lines are designed to be used with stock Yamaha calipers.

Fits ’09~’12 R1 a Front Brake Line Kit ABA-0SS56-22-53 $99.95b Rear Brake Line KitABA-0SS56-22-54 $59.95

1-16

2012YZF-R1

Sprocket sizes other than stock are for closed-course competition only. Changing the final drive ratio affects exhaust emissions and also affects speedometer readings.

a Front SprocketsFits ’98~’12 R1Yellow Zinc Finish520 Series15TABA-0SS56-23-19 $29.9516TABA-0SS56-23-20 $29.9517TABA-0SS56-23-21 $29.95530 Series16TABA-0SS56-20-10 $33.4917TABA-0SS56-20-05 $33.49

b Rear SprocketsFits ’99~’12 R1Black Anodized 520 Series44TABA-0SS56-23-15 $54.9545TABA-0SS56-23-16 $54.9546TABA-0SS56-23-17 $54.9547TABA-0SS56-23-18 $54.95530 Series43TGYT-0SS56-20-06 $69.9544TGYT-0SS56-20-07 $69.9545TGYT-0SS56-20-08 $69.9546TGYT-0SS56-20-09 $69.9547TABA-0SS56-23-10 $69.9548TABA-0SS56-23-11 $69.95

1a

1b

1. GYtR Sprockets by talonFront sprockets are manufactured from heat-treated chromoly steel, are CNC-machined to extremely high tolerances, and have a yellow zinc finish to avoid cor-rosion. Rear sprockets are black anodized and made from 7075-T6 billet aluminum (1/3 the weight of steel). CNC-machined for maximum fit accuracy and long-lasting durability.

Track/Race application: aluminum sprockets and 520 Series conversions are best suited for track or racing applications but can also be used for street use if the stock number of sprocket teeth is used. For a 520 Series conversion on an R1, gearing selection will vary from one track to another, but a good starting point would be a 15T front and 45T rear. To change gearing based on your particular track, a 16T front with 44T and 46T rears would provide a wide range of gearing selection. See the Stock Gearing Reference Chart on facing page to determine the sprockets that best fit your needs. Also, see pg. 1-18 for full GYTR Performance Chain details.

1-17

2. GYtR Sprockets by talon for marchesini WheelsYamaha has developed a line of performance sprockets made specifically for the Marchesini H-Spoke and T-Spoke Wheels (shown on pg. 1-20). Sprockets are made from 7075-T6 billet aluminum and CNC-machined for maximum fit accuracy.

Sprocket sizes other than stock are for closed-course competition only. Changing the final drive ratio affects exhaust emissions and also affects speedometer readings.

Fits ’98~’12 R1Black520 Series44TABA-0SS56-22-65 $64.9545TABA-0SS56-22-66 $64.9546TABA-0SS56-23-04 $64.9547TABA-0SS56-23-05 $64.9548T ABA-0SS56-23-06 $64.95525 Series44TABA-0SS56-22-70 $69.9545TABA-0SS56-22-69 $69.95530 Series44TABA-0SS56-22-67 $69.9545TABA-0SS56-22-68 $69.9546TABA-0SS56-23-07 $69.9547T ABA-0SS56-23-08 $69.9548TABA-0SS56-23-09 $69.95

R1 STOCK GEARING REFERENCE CHART

R1 Model Year Front Sprocket Rear Sprocket Chain Size/No of Links

1998~2003 16T 43T 530/ 114L

2004~2008 17T 45T 530/ 116L

2009~2012 17T 47T 530/ 120L

2

1-18

2012YZF-R1

GYtR by EK® ultra-High Performance Sportbike Racing Chains520GDX (Chain Type B = Quadra-Ring) – The GDX model is a premiere GYTR Quadra-Ring (X-shaped O-ring) chain. This chain offers the ultimate balance of performance and durability. It has up to 50% longer life and less friction than a traditional O-ring-type chain. The GDX chain comes with one clip-type and one rivet-type master link. Individual master links also available separately. Tensile strength = 8500 lb.

525GDX (Chain type B = Quadra-Ring) – The GDX model is a premiere GYTR Quadra-Ring (X-shaped O-ring) chain. This chain offers the ultimate balance of performance and durability. It has up to 50% longer life and less friction than a traditional O-ring-type chain. Available in both 120 and 130 links. Individual master links also available separately. Tensile strength = 8800 lb.

530GDX (Chain type B = Quadra-Ring) – The GDX model is a premiere GYTR Quadra-Ring (X-shaped O-ring) chain. This chain offers the ultimate balance of performance and durability. It has up to 50% longer life and less friction than a traditional O-ring-type chain. Individual master links also available separately. Tensile strength = 9400 lb.

520GDXL (Chain type C = Quadra-Ring Lite) – The GDXL model is a premiere GYTR Quadra-Ring (X-shaped O-ring) chain. It has all the ex-ceptional features of the GDX model but with significant weight savings. Like the GDX, this chain offers the ultimate balance of performance and durability. It has up to 50% longer life and less friction than a traditional O-Ring-type chain. The GDXL chain comes with one clip-type and one rivet-type master link. Individual master links also available separately. Tensile strength = 8000 lb.

520GPX (Chain type B = Quadra-Ring) – The GPX Pro Race model is a premiere GYTR Quadra-Ring (X-shaped O-ring) chain. It’s a great replacement for race applications and also offers significant weight savings. Individual master links also available separately. Tensile strength = 8630 lb.

520/ 525/ 530GtS (Chain type B = Quadra-Ring) – The GTS model is a premiere GYTR Quadra-Ring (X-shaped O-ring) chain. It has all the same exceptional “Quadra-Ring” features of the GDX model. These chains are a great replacement for race applications. 525GTS and 530GTS models are available in both 120 and 150 links. Individual master links also available separately. 520GTS Tensile strength = 9400 lb.525GTS Tensile strength = 10,300 lb.530GTS Tensile strength = 11,100 lb.

520GDO (Chain type a = O-Ring) – The GDO model is one of the finest O-ring chains on the market. The GDO chain is extremely durable. Chain comes with one clip-type and one rivet-type master link. Individual master links also available separately. Tensile strength = 8000 lb.

1-19

RECOMMENDED GYTR PERFORMANCE CHAINS

Chain Model

Chain NameChain Type

Displacement Limit

Links Finish Chain Part Number M S R P

530GTSGYTR Quadra-Ring Chain B Up to 1400cc 150 Gold ABA-0SS56-22-86 $269.95

Replacement GYTR Rivet Type Master Link ABA-0SS56-22-87 $7.25

530GTSGYTR Quadra-Ring Chain B Up to 1400cc 150 Chrome ABA-0SS56-23-00 $299.95






530GDXGYTR Quadra-Ring Chain B Up to 1100cc 120 Gold ABA-0SS56-22-92 $143.95










525GDXGYTR Quadra-Ring Chain B Up to 900cc 120 Chrome ABA-0SS56-22-97 $234.95


525GDXGYTR Quadra-Ring Chain B Up to 900cc 120 Gold ABA-0SS56-22-84 $129.99




520GPXGYTR Pro Race Quadra-Ring Chain B Up to 1000cc 120 Natural ABA-0SS56-22-82 $195.95


520GDXL

GYTR Quadra-Ring Lite Chain C Up to 650cc 120 Gold GYT-0SS55-60-42 $99.95

Replacement GYTR Clip Type Master Link GYT-0SS56-30-88 $4.50

Replacement GYTR Rivet Type Master Link GYT-0SS56-30-90 $3.99

520GDXL

GYTR Quadra-Ring Lite Chain C Up to 650cc 120 Natural GYT-0SS55-60-43 $95.95



520GDX

GYTR Quadra-Ring Chain B Up to 750cc 120 Gold GYT-0SS55-60-44 $114.95



520GDX

GYTR Quadra-Ring Chain B Up to 750cc 120 Natural GYT-0SS55-60-45 $99.95



520GDO

GYTR O-Ring Chain A Up to 650cc 120 Gold GYT-0SS55-60-40 $74.95



520GDO

GYTR O-Ring Chain A Up to 650cc 120 Natural GYT-0SS55-60-41 $69.95



1-20

2012YZF-R1

1. Yamaha axle BlocksAdd some personalization to your R1 with these anodized billet aluminum axle blocks. Replaces stock. Fits ’04~’12 R1Blue14B-F53R0-V0-00 $59.95Red14B-F53R0-T0-00 $59.95

2. WheelsThese Marchesini wheels are manufactured by plastic deformation aluminum alloy forging. They provide a high lateral and torsional resistance plus a good weight reduc-tion compared to stock wheels. Come complete with wheel bearings and spacers. Sprocket required for rear wheel (see sprockets made specifically for these Marchesini wheels on Pg. 1-17). Suitable for track and street use.

H-Spoke WheelRace Team Replica – A Yamaha Exclusive!Fits ’98~’12 R1 Black a FrontABA-0SS56-21-47 $969.95b RearABA-0SS56-21-51 $1,574.99

t-Spoke WheelFits ’98~’12 R1 Frontc Silver ABA-0SS56-21-48 $969.95d GoldABA-0SS56-21-55 $969.95Reare Silver ABA-0SS56-21-52 $1,574.99f GoldABA-0SS56-21-53 $1,574.99

1

2a 2b

2c

2e 2f

2d

1-21

3. tire WarmersGraves Motorsports™ CTC tire warmer offers incredible performance at an affordable price. The tire warmer has a wear-resistant outer shell for improved durability. This tire warmer was designed with performance in mind; with the warmer cycling at 70° C (160° F) to ensure tires don’t get overheated and are ready to go at race time. This two-stage tire warmer features a LED light to show when tires have achieved optimum cycling temperature; when green light is on tires are ready to go! FrontSuperbike/Supermoto®

Fits 120 size front tires (4-1/4" rim)DBY-ACC56-23-53 $199.95RearSuperbikeFits 180/195 size tires (5-1/2"~ 6-1/4" rim)DBY-ACC56-23-54 $199.95Supermoto®

Fits 160 Supermoto® and 250 GP size tires (4-1/2" rim)DBY-ACC56-23-55 $199.95

Body

4. GYtR Carbon Fiber Heel Guard trimThese lightweight carbon fiber trim pieces are adhesive-backed for quick and easy installation. Two-piece set (one side shown here).Fits ’09~’12 R114B-F74C0-V0-00 $24.95

5. GYtR Carbon Fiber Rear FenderThis lightweight, highly stylized carbon fiber rear fender simply replaces stock.Fits ’09~’12 R114B-F16F0-V0-00 $299.95

6. GYtR Carbon Fiber Chain GuardThis lightweight, highly stylized carbon fiber chain guard replaces stock and adds a touch of style to your bike.Fits ’09~’12 R1 14B-F21E0-V0-00 $239.95

7. GYtR Carbon Fiber airbox CoverThis strong but lightweight airbox cover features a great-looking carbon fiber weave. Lighter than stock. Mounts using stock hardware.Fits ’09~’12 R114B-F41G0-V0-00 $369.95

3

Graves Motorsports™ Tire Warmers shown powered by Yamaha EF2000iS generator (not included).

4 5

6 7

1-22

2012YZF-R1

1. GYtR Carbon Fiber tank trimEasy to install for a stylish appearance that also offers weight savings. (Set of 2.)Fits ’09~’12 R114B-F41F0-V0-00 $324.95

2. traction PadsThese tank and side cover traction pads are made of a clear, pliable elastomer material molded to shape with “traction knobbies” that provide functional, non-abrasive grip. These kits come pre-molded for the tank and side cover of your R1. These traction pads make gripping your bike incredibly easy.Fits ’09~’12 R1ABA-0SS56-21-80 $48.95

R

3. Fuel Bases & Lid CapsVortex® fuel bases and keyless lid caps are machined from lightweight billet aluminum and available in either anodized black or blue finishes. Bases and lid caps are sold separately. For closed-course competition only.Fits ’98~’12 R1Fuel BasesBlackABA-0SS56-22-11 $66.95Blue (shown)ABA-0SS56-22-12 $66.95Fuel Lid CapsBlackABA-0SS56-22-13 $39.95Blue (shown)ABA-0SS56-22-14 $39.95

4. Yamaha Raised Bubble WindscreenMade from high-quality polycarbonate. The shape chan-nels the flow of air over the rider, reducing the amount of air directed at the rider’s torso. Uses the stock mounting hardware.Fits ’09~’12 R1a Clear14B-F83J0-V0-00 $84.95b Tinted14B-F83J0-U0-00 $109.95

1

2

4a 4b

3

Fuel Base Fuel Lid Cap

1-23

Ht moto™ Seat CoversThese quality seat covers are made from marine-grade vinyl. Double-stitched seams add strength. Seat covers are precision-cut to fit your Yamaha R1 sportbike. Covers are easy to install and maintain. Includes both rider and passenger seat covers.

a Black Carbon Fiber-Look Top/Blue InlayVinyl seat cover top is black with a carbon fiber-looking weave pattern with blue inlay.Fits ’09~’12 R1ABA-0SS56-21-07 $69.95

b Blue Top/Black Carbon Fiber-Look InlayVinyl seat cover top is blue with black carbon fiber-looking weave pattern inlay.Fits ’09~’12 R1ABA-0SS56-21-08 $69.95

c Black Carbon Fiber-Look Top/White Inlay with Red Contrast StitchingVinyl seat cover top is black with a carbon fiber-looking weave pattern with white inlay and red contrast stitching.Fits ’09~’12 R1ABA-0SS56-21-09 $69.95

d Black Carbon Fiber-Look Top/Red InlayVinyl seat cover top is black with a carbon fiber-looking weave pattern with red inlay. Fits ’09~’12 R1ABA-0SS56-21-10 $69.95

e Black Top/Black Carbon Fiber-Look Inlay with Red Contrast StitchingVinyl seat cover top is black with black carbon fiber-looking weave pattern inlay and red contrast stitching.Fits ’09~’12 R1ABA-0SS56-21-11 $69.95

f Red Carbon Fiber-Look Top/Black InlayVinyl seat cover top is red with a carbon fiber-looking weave pattern with black inlay.Fits ’09~’12 R1ABA-0SS56-21-12 $69.95

g Yellow Top/Black InlayVinyl seat cover top is yellow with black inlay.Fits ’09~’12 R1ABA-0SS56-21-13 $69.95

a

b

c

d

e

f

g

1-24

2012YZF-R1

h. Black Carbon Fiber-Look Top/Yellow Inlay

weave pattern with yellow inlay. Fits ’09~’12 R1ABA-0SS56-21-14 $69.95

i. Black Carbon Fiber-Look Top/Black Inlay with Yellow Contrast Stitching

weave pattern with black inlay and yellow contrast stitch-ing.Fits ’09~’12 R1ABA-0SS56-21-15 $69.95

j. Black Top/Silver Carbon Fiber-Look Inlay

weave pattern inlay.Fits ’09~’12 R1ABA-0SS56-21-16 $69.95

k. Black Top/Black Carbon Fiber-Look Inlay with Blue Contrast Stitching

weave pattern inlay and blue contrast stitching.Fits ’09~’12 R1ABA-0SS56-21-17 $69.95

1. Yamaha R1 Comfort Seat Newly engineered comfort seat for the ultimate riding ex-perience. Made from dual-density multi-layered foam that incorporates the newest technology in seat development, making a gel layer unnecessary.Fits ’09~’12 R114B-F47C0-V0-00 $239.95

2. Yamaha R1 Seat CowlsQuickly change the styling of your bike by adding a color-matched seat cowl. Exchanges with the stock passenger seat. Simply turn the seat lock to change back and forth, if desired.Fits ’09~’12 R1a. Team Yamaha Blue14B-F47F0-V0-00 $199.95b. Raven14B-F47F0-T0-00 $199.95

3. Yamaha R1 Tag Eliminator Allows for the removal of the stock license tag holder. In-cludes all necessary components to maintain legal require-ments in most areas. Check your state’s DMV regulations before using.Fits ’09~’12 R114B-F16E0-V0-00 $129.95

h

i

j

k

1 2a

2b 3

HT Moto™ Seat Covers Continued

1-25

CARGO

Pantone 130

Black

White

4. tank BagPolycarbonate, hardshell tank bag by Axio®. Tank bag at-taches to head bolt on tank as well as with strong magnets that wrap underneath the tank.NOTICE: Do not put goods into tank bag that may be sensitive to magnetic fields (magnetic media, electronic equipment, etc.)

Fits ’07~’12 R1Carbon Fiber LookGYT-14B55-50-44 $189.95

5. tail BagPolycarbonate, hardshell tail bag by Axio®. Tail bag attaches directly to passenger seat or rear cowl using a clear plastic strap in the rear and two hook-and-loop straps in the front. Includes a reflective panel in the rear and doubles as a rider backrest.Fits ’07~’12 R1Carbon Fiber Look (shown)GYT-14B55-50-45 $149.95BlueGYT-14B55-50-43 $149.95

6. GYtR Front Wheel StandFactory race team-inspired design. Durable and easy to use. Super lightweight construction using 6061-T6 aircraft-quality aluminum. Black bright dip finish. (Must be used in combination with Rear Wheel Stand.)Fits all R1 modelsGYR-RACES-FR-BK $174.95

7. GYtR Rear Wheel StandFactory race team-inspired design. Durable and easy to use. Super lightweight construction using 6061-T6 aircraft-quality aluminum. Black bright dip finish. (Requires Swingarm Spools, sold separately.)Fits all R1 modelsGYR-RACES-RR-BK $174.95

8. Front Wheel Stand (with Headstock)Developed by Harris Performance Products Ltd., this is the ultimate stand for maintenance, especially when you need to remove the front wheel or forks. Features a CNC-machined knuckle for greater rigidity plus an under-yoke adaptor kit. Made from high-quality stainless steel tubing, the stand provides a secure platform for your motorcycle. The supplied yoke pin locates in the yoke stem of your bike when the stand is in use. Must be used in conjunction with rear stand.Fits ’03~’12 R1GYT-0SS55-50-67 $349.95

4

5

6 7

8

STANDS/ COVERS/ SECURITY

1-26

2012YZF-R1

1 1. Front Wheel StandDeveloped by Harris Performance Products Ltd., this front paddock stand locates under each fork leg and facilitates all front-end work including wheel cleaning and removal. Main tubes are satin-finished stainless steel with mild steel zinc-plated swing plates with PVC anti-scuff sleeves. Two high-load wheels are incorporated into the design. A universal stand, the under fork leg probes swing into the correct posi-tion for any fork application. This one-piece welded structure comes with all necessary fixtures, fasteners, and fitting for immediate use. Must be used in conjunction with rear stand.Fits all R1 modelsGYT-0SS55-50-65 $159.95

2. Rear Wheel StandDeveloped by Harris Performance Products Ltd., this “roll-on” rear stand is fabricated as a one-piece unit using stain-less steel tubing and high-load nylon wheels. The mild steel fabricated cups are coated to help protect the swingarm from friction damage when the stand is used, and are adjustable to accommodate different widths. (Requires Swingarm Spools, sold separately.)Fits all R1GYT-0SS55-50-66 $189.95

3. GYtR Swingarm SpoolsOne-piece construction with machined Tuning Fork accent.Fits all R1 Black AnodizedGYT-SPOOL-AL-BK $27.95Blue AnodizedGYT-SPOOL-AL-BL $27.95 Clear AnodizedGYT-SPOOL-AL-CL $27.95Red AnodizedGYT-SPOOL-AL-RD $27.95

4. Swingarm Spools6mm spools fit Yamaha motorcycles equipped with 6mm threaded spool bosses. (Sold in pairs.) ClearDBY-ACC56-23-48 $24.95BlackDBY-ACC56-23-50 $24.95BlueDBY-ACC56-23-49 $24.95

5. Yamaha R1 Bike CoversMade from premium, ultra-durable Sur Last® solution-dyed polyester fabric. Resists fading and protects your bike from the elements. Custom tailored for a precise fit.Fits ’98~’12 R1a BlackABA-4C828-00-00 $119.95b BlueABA-4C828-00-01 $119.95

2

3

4

5b

5a

1-27

R

6. RoadLoK® anti-theft SystemsThe RoadLoK® anti-theft locking system is specifically engineered for your specific make and model motorcycle. It completely immobilizes the front wheel, unlike disc locks, padlocks, or cables. The RoadLoK® is permanently mounted to the caliper, which eliminates the need for in-transit storage, and the pin removes completely so it cannot accidentally engage while riding. Each RoadLoK® system is 100% American-made. Additionally, vehicles equipped with the RoadLoK® anti-theft system are eligible for an insurance discount* from most major insurance providers (the amount varies by insurer and state).Fits ’07~’12 R1Stealth BlackABA-0SS58-40-23 $299.99Victory RedABA-0SS58-41-02 $299.99

*Insurance discount not guaranteed; contact your insurance rep for confirmation. The RoadLoK® insurance discount (when applicable) varies by state. Commonly, the Road-LoK® discount is 5%~20% depending upon the insurance company, policy type, and state of residence. RoadLoK® Security has partnered with GEICO® to provide anti-theft discounts to their policyholders protected by the RoadLoK® system.

Stealth Black

Victory Red©2010 ROADLOK®

6

1-28

2012YZF-R1

SECURE HELMET

TM

1. Helmet LocksThe HelmetSecure™ lock attaches permanently to a round handlebar, or other bar (cruisers and standards) or triple clamp stem nut (sportbikes), so you only need to fit it once. After that, the lock is always available for use, without hav-ing to carry or store it. The lock incorporates an integral, pre-coiled, steel cable to go through the face of the helmet or D-ring and back into the lock. If you have the key, you can unbolt the lock from the handlebar. The design makes the bolts that secure the lock to the handlebar/ triple clamp inaccessible when the cable is locked, so the locking mechanism not only locks the cable, but also prevents the lock itself from being removed from the bike. Locking your helmet to the center of your handlebar or triple clamp means that the helmet rests high on the bike, away from dirty/hot exhausts, and usually upright so that rain will not fall into it. Two models available; the Classic (for cruiser, standard, and touring bikes) and the Sportbike Lock (for sportbikes).a Sportbike LockThe Sportbike lock comes with a replacement stem nut – simply replace the stock stem nut and, using the included Allen/hex key, bolt the lock around the stem nut. You will also need a wrench to fit the 36mm stem nut. Matte BlackDBY-ACC58-41-22 $79.99b Classic LockThe Classic HelmetSecure™ lock has two rubber inserts so that it can be fitted, as standard, to the commonly-sized handlebars or other bars (7/8", 1", and 1-1/4" diameter). Allen/hex key included – no other tools are needed.ChromeDBY-ACC58-41-20 $59.99Matte BlackDBY-ACC58-41-21 $59.99

2. Garage Door Remote SystemThe Flash2Pass™ is the ultimate garage door opener for your motorcycle, ATV, scooter, Rhino, snowmobile, car, or any other vehicle with High/ Low beam headlights. A simple double flash of your headlight high beams opens or closes your garage door. No remote transmitter to get stolen or lost. Digital encrypted signal and rolling code technology for ultimate security. Up to six transmitters may operate a single receiver, and additional transmitters can be purchased separately (ABA-0SS58-40-15). Additional receivers (ABA-0SS58-40-16) may be installed elsewhere and programmed to your Flash2Pass™-equipped vehicle. Works with virtually any garage door opener manufactured since 1982. This complete set consists of the patented transmitter, corresponding receiver, and all installation hardware. Easy do-it-yourself installation instructions.Garage Door Remote System (shown)ABA-0SS58-40-14 $79.95Individual ReceiverABA-0SS58-40-16 $54.95Individual TransmitterABA-0SS58-40-15 $34.95

2

1a 1b

Chrome

Engine/ Performance . . . . . . . . . 2-2

Exhaust . . . . . . . . . . . . . . . . 2-5

Electronic Management/

Fuel/ Intake . . . . . . . . . . . . . 2-5

Chassis Protection . . . . . . . . . . 2-7

Controls . . . . . . . . . . . . . . . 2-11

Suspension/ Brakes/

Sprockets/ Chains . . . . . . . . 2-15

Wheels . . . . . . . . . . . . . . . 2-19

Clear Guard/ Gas Stop Valves/

Covers . . . . . . . . . . . . . . 2-19

Stands/ Mats/ Gas Cans . . . . . . 2-20

Yamaha Genuine

Replacement Parts . . . . . . . . 2-23

WR450F

2-2

2012WR450F

1 EnginE/ PErformancE

1. NEW! GYTR® Ported Cylinder Head AssemblyHead comes fully assembled and ready to install – no costly core charges or deposits, or exchange programs that can add to downtime. CNC milling ensures that every head is ported to the maximized design eliminating variances that hand porting can produce. Developed on the flow bench in conjunction with dyno and track testing to ensure the ultimate in performance and durability. Includes GYTR Performance Camshaft Kit. Also includes stock valve train and cam gears for durability and easy maintenance. GYTR Head Assemblies are used by Yamaha SX/ MX/ GNCC®, and ATV Race Teams.NOTE: For maximum performance and protection, always use Yamalube® 15W-30 Full Synthetic Oil after installation – two quarts are included with each GYTR Ported Cylinder Head Assembly.This accessory is restricted to closed-course use (see note 1 below) Fits ’12 WR450F1DX-E11B0-V0-00 $2,195.95

2. NEW! GYTR Performance Camshaft KitMaximize your top-end horsepower with this Performance Cam Kit. Ground to exact specifications using special CNC cam-grinding machines. Special billet alloy construction provides consistent machined surfaces for increased durability. Cams come with durable stock cam gears and de-comp installed, degreed-in, and ready to install. No costly core charges or deposits, or exchange programs that can add to downtime. Designed for use in modified engines equipped with a high compression piston.This accessory is restricted to closed-course use (see note 1 below)Fits ’12 WR450F1DX-E21F0-V0-00 $545.95

1 This accessory affects emissions; installation of EPA-regulated 2006 or later WR models constitutes unlawful tampering except when used solely for closed-course compe-tition. YZ models are for closed-course use regardless of modification.

2

2-3

3

4

GYTR Clutch ComponentsGYTR clutch components are precision-machined from aerospace-quality aluminum alloys with a unique hard coating. This provides superior performance and clutch feel, as well as excellent component durability. The “auto oiling system” forces oil through specially cut holes in the pressure plate, into the inner hub, and then to the clutch plates. This results in improved clutch performance, with lower clutch temperatures, less clutch expansion, and extended clutch life.

3. GYTR Billet Clutch BasketUsed by Yamaha Racing Teams.Fits ’04~’12 WR450FGYT-5XD56-10-00 $ 209.95

4. GYTR Billet Inner Clutch HubFits ’05~’12 WR450FGYT-5XD56-40-00 $ 279.95

5. GYTR Billet Clutch Pressure PlateFits ’03~’12 WR450FGYT-5XD56-20-00 $ 157.95

6. GYTR Billet Clutch CoverFits ’03~’12 WR450FGYT-5XD35-10-AL $110.95

65

2-4

2012WR450F

1a1. GYTR Engine Cover Plugs These anodized 6061 billet aluminum plugs replace the stock plastic plugs.14mmFits all 4-stroke YZ and WR models a . Black5XC-E51B0-V0-00 $26.95b . BlueGYT-2S235-14-AL $24.95c . Red18P-E51B0-V0-00 $26.95

27mmFits ’03~’12 WR450Fd . BlueGYT-2S235-27-AL $25.95

2. GYTR Oil Fill Cap Anodized 6061 billet aluminum plug replaces stock plastic cap.Fits all YZ and WR modelsa . Black5XC-E53A0-V0-00 $26.95b . BlueGYT-2S235-01-00 $26.95

3. GYTR Oil Drain Plug Replace the stock steel drain plug with this billet aluminum plug. 60% lighter than stock. Includes a magnet that col-lects metal particles to prevent them from circulating in the motor oil. Used by Yamaha Racing Teams.10mm x 16mmFits ’03~’12 WR450FBlue (shown)18P-E51C0-V0-00 $27.95Red18P-E51C0-U0-00 $27.95

1b

1c

2a

3

2b

1d

2-5

4

1 This accessory affects emissions; installation of EPA-regulated 2006 or later WR models constitutes unlawful tampering except when used solely for closed-course competition. 2 This performance accessory does not meet California standard for off-road recreational vehicle usage regardless of model year.

65

7 8

EXHAUST

4. NEW! GYTR by FMF® PowerCore®4

The PowerCore®4 is designed to increase the horsepower and torque throughout the entire power curve and give you

-cial no matter what your riding style or ability is. Features include space-age internal packing for maximum packing

spark arrestor. 97.5 dBA sound level. 95.5 dBA with QuietCore™ Spark Arrestor Insert (33D-E46C0-T0-00), sold separately.This accessory is restricted to closed-course use (see note 1 below)Fits ’12 WR450F1DX-E47A0-V0-00 $299.99

5. Replacement Spark Arrestor InsertFits GYTR by FMF® PowerCore®

33D-E46C0-V0-00 $29.99

6. QuietCore™ Spark Arrestor InsertNoise-reducing insert with spark arrestor for the GYTR by FMF® PowerCore®

the ’12 WR450F.

33D-E46C0-T0-00 $39.99

InsertDesigned to be used with the stock exhaust system to offer

96 dBA 20" stationary test.This accessory may be restricted to closed-course use (see notes 1, 2 below)Fit ’05~’12 WR450F

GYT-5TJ93-75-01

$46.95

8. NEW! GYTR Competition Kit/ ECUAllows the use of the GYTR Power Tuner (33D-H59C0-V1-00), sold separately. Gives you race-tuning capabilities.This accessory is restricted to closed-course use (see note 1 below) Fits ’12 WR450F1DX-H59B0-V0-00 TBA

ELECTRONIC MGMT./ FUEL/ INTAKE

2-6

2012WR450F

11. GYTR Power TunerThis easy plug-in fuel-injection and ignition tuning tool allows riders to quickly adjust the fuel and ignition maps to suit riding conditions and rider preference. Allows nine easy-to-program adjustment points for both the fuel and ignition maps. Monitor function allows user to monitor the data from various sensors on the bike as well as adjust idle timing, see engine running time, and self-diagnosis func-tion. Powered by two AA batteries, thus no laptop or time-consuming downloads necessary. Unit does not have to be plugged into bike to create maps. Compact design can fit in the palm of your hand, pocket, etc. Memory function can save up to nine custom maps. Requires GYTR Competition Kit/ECU (1DX-H59B0-V0-00) sold separately.Fits ’12 WR450F with GYTR Competition Kit/ECU33D-H59C0-V1-00 $279.95

2. Yamaha Deluxe 4-Stroke Hour Meter and TachometerYamaha’s Deluxe Engine Meter helps you keep track of your engine’s operating hours. Includes hour meter and ta-chometer functions. Also includes pre-programmed service intervals at 10 hours (initial) and every 50 hours thereafter. A flash alert displays for a 2-hour period upon reaching the specified interval.Fits all 4-stroke Yamaha modelsNOTE: Tachometer function does not work properly on 2-stroke models.

ENG-METER-4C-01 $49.95

3. Yamaha Deluxe Hour MeterIncludes pre-programmed service alert intervals at 10 hours (initial) and every 50 hours thereafter. A flash alert displays for a 2-hour period upon reaching the specified interval.Fits all 2-stroke and 4-stroke Yamaha modelsENG-METER-2C-01 $46.95

Yamaha Universal Hour Meter(Same appearance as #3.)Hour metering function only (i.e., no service alerting func-tion).Fits all 2-stroke and 4-stroke Yamaha modelsENG-HOURS-00-00 $39.95

32

2-7

6

4. GYTR Two-Stage Foam Air Filter Simply the best in foam air filters. Race proven to provide the greatest protection for your engine. Two separate layers of foam provide excellent filtration of dirt and allow maximum air flow. Durable and easy to clean. Service with Genuine Yamaha Foam Filter Oil.Fits ’03~’12 WR450FGYT-5TJ95-00-00 $28.95

chassis protection

5. NEW! GYTR Radiator BracesConstructed of 3.2mm thick aluminum for optimized strength-to-weight ratio. Braces do not restrict airflow to radiator so there is no increase in the probability of overheating. Full cage design has rolled flange edges for added strength and protection. Easy-to-install design. No trimming of the plastics is required to install.Fits ’12 WR450F1DX-E24C0-V0-00 $99.95

6. GYTR Woods Style Brush Deflector MountsRequired for Brush Deflector installation.Fits all YZ/ WR models (except WR250R/ WR250X)GYT-5UM26-30-00 $119.95

ULTIMATE PROTECTION

HANDGUARDS

7. VPS HandguardsVPS (Variable Protection System) Handguards are ergo-nomically designed with a reinforced aluminum backbone. Replaceable dual-stage, injection-molded high durability plastic shields. Variable height wind deflector. Choice of mounting hardware to suit all popular models as well as an optional skid plate to protect aluminum outer edge. Ideal for motorcycles with standard or long levers.Fits ’06~’12 WR450FFor 1-1/8" barsGYT-0SS56-31-96 $79.95

8. Optional VPS Skid Plate SetOptional skid plates protect outer edges of handguards and aluminum bars. Universal fit for 7/8" and 1-1/8" bars using VPS handguards.GYT-0SS56-31-97 $12.95

9. Replacement VPS HandguardGYT-0SS56-32-00 $29.95

54

8

7

9

2-8

2012WR450F

2

1. EGO™ HandguardsCompact and stylish design. Incorporates a high-strength aluminum backbone. Integrated replaceable ultra tough plastic shield. Suitable for Enduro/trail bikes with short levers. Ideal for extreme woods riding.Fits ’06~’12 WR450FFor 1-1/8" barsGYT-0SS56-31-99 $74.95

2. Replacement EGO™ HandguardGYT-0SS56-32-01 $27.95

3. Replacement 14mm Bar End Mounting KitFor VPS and EGO Handguards.GYT-0SS56-32-02 $9.99

4. Center Reach Mount Complete Racer Pack These Center Reach Mount (CRM) Complete Racer Packs include CRM Probend® bars, CRM mount clamps, classic Enduro shields, Powergrip bar ends, and Probend® abrasion guards. Revolutionary patent-pending design. Trademark Probend® shape. Replaceable integrated plastic abrasion guard. Center-reach clamps provide maximum bite to secure hand guards and allow for superior clearance on a wide range of bars. Powergrip alloy bar ends fit standard 7/8" and oversized bars.Fits all 2-stroke and 4-stroke YZ & WR modelsa . Blue GYT-0SS56-30-49 $124.95b . WhiteGYT-0SS56-30-48 $124.95

4b

3

4a

1

2-9

5c

5. Alloy Stealth Complete Racer PackComplete Racer Pack includes shields, brackets, and hard-ware. Aircraft quality 6061 T-6 aluminum brackets. Slim, low-profile handshield design. Simple and easy to install. Rotating bolt plate allows brackets to be mounted above or below levers.Fits all 2-stroke and 4-stroke YZ & WR models (except WR250R/ WR250X)a . BlackGYT-0SS56-30-59 $44.95b . Blue GYT-0SS56-30-61 $44.95c . WhiteGYT-0SS56-30-60 $44.95

6. Alloy Stealth Brackets Replacement bracket set for the very popular Stealth Hand-guards. Includes “C” clamp and clamp hardware.Fits all 2-stroke and 4-stroke YZ & WR models (except WR250R/ WR250X)GYT-0SS56-30-62 $24.95

7. Enduro Hand Shields High-quality injection-molded fit and finish. Includes all mounting hardware. Fits Cycra® Probend® Center Reach Mount (CRM) bars.Fits all 2-stroke and 4-stroke YZ & WR modelsa . BlackGYT-0SS56-30-74 $19.95b . BlueGYT-0SS56-30-76 $19.95c . WhiteGYT-0SS56-30-75 $19.95

5b5a

6

7c

7b7a

2-10

2012WR450F

2 1. Series One Probend® Hand GuardsCycra® blended the best features of a straight bar and the classic Probend®, to result in the Series One Probend®. Many riders prefer the straight bar end with more of a closed-in area but still want ample room for levers, hands, and controls. Cycra® was able to accommodate both by adding a subtle drop in the bar end. Requires “U” Clamp Set (sold separately) for specific type of handlebar.Fits all 2-stroke and 4-stroke YZ & WR models (except YZ85)Hand Guardsa . BlackDBY-ACC56-34-01 $59.95b . BlueDBY-ACC56-34-03 $59.95c . WhiteDBY-ACC56-34-02 $59.95“U” Clamp Setsd . Fits standard handlebarsDBY-ACC56-34-05 $34.95Fits TAG Metals® 1/ProTaper® handlebars up to ’07DBY-ACC56-34-04 $34.95Fits TAG Metals® T-2/ Renthal® Taper/ Neken®/ ’08~’11 ProTaper®/ ’03~’09 stock KTM® handlebarsDBY-ACC56-34-06 $34.95

2. NEW! Enduro Skid PlateThis 4.06mm aluminum plate is designed with side skirts to help protect the lower frame rails, critical engine compo-nents, water pump, ignition cover, and clutch components even on the gnarliest enduro course. Used by the AmPro™ Yamaha Racing Team.Fits ’12 WR450F1DX-F14B0-V0-00 $114.95

2

1b

1c

1a

1d

2-11

3. GYTR Plastic Chain GuideThis ultra-durable UHMWPE plastic guide is designed to flex, not bend, in the event of impact.Fits ’07~’12 WR450F17D-F21E0-V0-00 $79.95

Controls

4. NEW! GYTR Billet Digital Meter CoverThis T-6061 billet machined aluminum cage provides added protection. Designed to allow the meter to “float” so meter movement is not restricted. This does not affect vibration transfer to the meter or the durability of the meter. Fits ’12 WR450F1DX-H35B0-V0-00 $89.95

5. GYTR Digital Meter Thumb Control Relocates the controls for the computer to the left thumb for easy operation.Fits ’06~’12 WR450FGYT-5TJ98-30-00 $39.95

5

4

3

2-12

2012WR450F

1

7b7a

2c

2b2a

1. GYTR Pivoting Front Brake Leverby ARC™

These levers are designed with a folding-pivot blade that will fold in the event of a tip-over. Pivot ratio mimics stock for excellent performance.AluminumFits ’01~’12 WR models (except WR250R/ WR250X)GYT-5SF37-30-00 $73.95

2. V-1 MDX Brake LeversExclusive multi-directional design sets the standard in piv-oting levers. These V-1 MDX levers not only swing forward in the event of a fall, but can swing up or down, depending on the angle of impact, helping eliminate a broken lever. Covered by an unprecedented 5-year limited warranty from Sunline®.Fits ’03~’12 WR450Fa . SilverGYT-0SS56-30-01 $79.95b . BlackGYT-0SS56-30-02 $79.95c . BlueGYT-0SS56-30-03 $79.95

2-13

2

3. Yamaha Handlebar Mounts These mounts offer a reversible offset to optimize ride position and can be set at stock height or 5mm taller. Use with the top half of the stock mounts.Fits ’10~’12 WR450F17D-F34D0-V0-00 $79.95

4. HandlebarsTapered outer wall 1-1/8" to 7/8" for use with standard size grips and controls. Cold-forged from aircraft quality 7075-T6 aluminum for greater strength and optimal flex. Shot-peened and anodized for durability. Knurled grip and clamp area to resist slippage. Vinyl covered bar pad included. Proprietary blue handlebar color option available only through Yamaha Parts & Accessories!T2 966 Bend Oversized HandlebarsFits ’06~’12 WR450FBlue (shown)GYT-0SS55-60-30 $89.95 BlackGYT-0SS56-30-72 $89.95T2 971 “RC” Bend Oversized HandlebarsFits ’06~’12 WR450FBlueGYT-0SS55-60-31 $89.95 BlackGYT-0SS56-30-73 $89.957771 Bend HandlebarsExclusive James Stewart bend!Fits ’06~’12 WR450FBlueGYT-0SS56-30-70 $89.95 BlackGYT-0SS56-30-71 $89.95

5. GYTR Yamaha Factory Racing Clamp Cover for 1-1/8" HandlebarsPrinted on scratch-resistant 15-mil vinyl, featuring theFactory Racing logo. 10" long.BlueGYT-5XC25-18-BL $19.95

4

3

5

2-14

2012WR450F

2

1. Throttle Cam System Exclusive cam system alters the ratio between hand-throttle rotation and opening of the carburetor, providing adjustable rider control. Comes with three different cams; one mimics the stock cam, another allows the rider’s hand more movement to open the carburetor (excellent for slick surfaces), and the last one ensures full throttle within a quarter turn.Features include:• Self-lubricating Delrin® bushings that eliminate aluminum-to-aluminum contact, providing a smooth “ball bearing” feel• Cam change is easily achieved in seconds• Removable throttle tube end cap allows for the installation of hand guards• Made from 6061 billet aluminum• CNC-machined for precision fit• Knurled throttle tube surface• Used by Yamaha Road Race, MX, and SX teamsFits all ’98~’12 YZ & WR 4-stroke models (except WR250R/ WR250X models)GYT-0SS56-31-82 $109.95

2. Quick-Turn Throttle TubeFeatures a larger diameter throttle cam that requires less throttle turn to reach full throttle. Less throttle turn also means less “elbow drop,” which keeps the rider in optimum riding position. Self-lubricating Delrin® bushings in each end of the throttle tubes eliminate aluminum-to-aluminum contact and provide a smooth “ball bearing” feel. Fits in your stock throttle housing, no need to cut, trim, or file. Knurled throttle tube. CNC-machined for a precision fit. Used by Yamaha Road Race, MX, and SX teams.Fits all ’98~’12 YZ & WR 4-stroke models (except WR250R/ WR250X models)GYT-0SS56-31-83 $69.95

1

2-15

3. Scott® MX2 GripsDesigned for superior grip and comfort. Features underside waffle and soft-ridged upper patterns. Grooved for safety wire.BlackABA-YZRMX-GP-BK $8.95BlueABA-YZRMX-GP-BL $8.95

SuSpenSion/ brakeS/ SprocketS/chainS

4. Pre-LoaderThe Talon Pre-Loader is a practical accessory that makes changing the pre-load on the rear shock easier, quicker, and more precise. A threaded and lockable top ring is used to set the basic pre-load and the bottom ring is used to set plus and minus from this setting. One notch is equivalent to one complete turn of a normal standard shock lower ring. The Talon Pre-Loader is manufactured from the highest-quality, aircraft-specification billet aluminum with a hard anodized finish. Fits ’98~’12 YZ (except YZ85/ YZ80) and WR models GYT-0SS56-31-44 $184.95

3

4

2-16

2012WR450F

11. GYTR Brake Line ClampReplace the stock steel (through ’08) clamp with this blue anodized billet aluminum piece.Fits ’03~’12 WR450FGYT-1P818-15-00 $34.95

2. GYTR Rear Brake ClevisThis billet rear brake clevis is machined to extremely tight tolerances which minimizes lateral movement or vibration of the rear brake pedal. This clevis allows for more height adjustment and features a titanium clevis pin that is half the weight of stock.Fits ’03~’12 WR450F5XC-F72A0-V0-00 $44.95

3. NEW! GYTR Rear Brake Disc GuardMade of ultra-durable UHMWPE (Ultra High Molecular Weight Polyethylene), this disc guard is designed to flex and not bend upon impact. Improved durability in gnarly off-road conditions. Machined collars and OE style hard-ware allows for easy, same tool installation.Fits ’07~’12 WR450F1DX-F58F0-V0-00 $99.95

4. GYTR Billet Offset Axle Blocks These billet aluminum soft anodized axle blocks are revers-ible and offset and keep the adjustment bolts from extend-ing too far back when running the rear wheel toward the back of the swingarm for maximum wheelbase.BlueFits ’09~’12 WR450F GYT-2S299-10-00 $41.954

2

3

2-17

5

5. GYTR Sprockets by Talon

FrontManufactured from heat-treated chromoly steel, CNC-machined to extremely high tolerances, has a zinc finish to avoid corrosion. Features self-cleaning grooves to shed off mud and grit, as well as reduce weight while maintaining strength. Used by Yamaha/ Valli Motorsports riders Austin Stroupe and Nick Wey, and the AmPro™ Yamaha Racing Team.

Sprocket sizes other than stock are for closed-course competition only on ’06 and later off-road models and all street legal models. Changing the final drive ratio affects exhaust emissions and also affects speedometer readings.

a . SteelFits all WR450F13TGYT-75439-13-00 $24.9514TGYT-75439-14-00 $24.95

RearMade from 7075-T6 billet aluminum CNC-machined for maximum fit accuracy. Features a radial mud groove etched just inside the sprocket teeth to shed mud and grit which saves weight and increases chain life. Also, see chart on pg. 2-18 for full GYTR Performance Chain details.

Sprocket sizes other than stock are for closed-course competition only on ’06 and later off-road models and all street legal models. Changing the final drive ratio affects exhaust emissions and also affects speedometer readings.

Fits ’03~’12 WR450F

b. Anodized Blue Color 47TGYT-75339-47-BL $59.9548TGYT-75339-48-BL $59.9549TGYT-75339-49-BL $59.9550TGYT-75339-50-BL $59.9551TGYT-75339-51-BL $59.9552TGYT-75339-52-BL $59.9553TGYT-75339-53-BL $59.95

6

5a 6

c . Anodized Magnesium Color48TGYT-75339-48-MG $59.9549TGYT-75339-49-MG $59.9550TGYT-75339-50-MG $59.9551TGYT-75339-51-MG $59.9552TGYT-75339-52-MG $59.95

d . Anodized Black Color47TGYT-75339-47-BK $59.9548TGYT-75339-48-BK $59.9549TGYT-75339-49-BK $59.9550TGYT-75339-50-BK $59.9551TGYT-75339-51-BK $59.9552TGYT-75339-52-BK $59.9553TGYT-75339-53-BK $59.95

5b

5c 5d

2-18

2012WR450F

GYTR Ultra-High PerformanceRacing Chains

428GMX (Chain Type D = Non-Sealed Chain) – This chain is intended for smaller displacement off-road appli-cations. High-quality replacement for racing or trail usage. High-spec rollers and bushings. Adds durability and style. Available in gold, blue, and natural. Individual master links also available separately. Tensile strength = 5000 lb.

520GMX (Chain Type D = Non-Sealed Chain) – Spe-cifically designed for Motocross and Supercross. Race-tested by Factory Riders to meet the demands of today’s high-performance machines, the 520GMX can be used for up to 250cc two-stroke and 500cc four-stroke machines. This non-sealed chain features high-tech CrH-coated pins for extremely hard outside surface and softer inside to increase the impact strength. Chains are available in gold or natural finishes. Individual master links also available separately. Tensile strength = 8400 lb.

520GMXL (Chain Type E = Non-Sealed Chain Lite) – Specifically designed for Motocross and Supercross. Race-tested by Factory Riders to meet the demands of today’s high-performance machines, the 520GMXL is a lighter version of the 520GMX that can be used for up to 125cc two-stroke and 250cc four-stroke machines. Chain saves weight with less rotating mass. This non-sealed chain fea-tures high-tech CrH-coated pins for extremely hard outside surface and softer inside to increase the impact strength. Chain comes in gold finish. Individual master links also available separately. Tensile strength = 6600 lb.

520GDO (Chain Type A = O-Ring) – The GYTR O-ring chain is manufactured by the inventor of the world’s first O-ring chain. The finest O-ring chain on the market is ideal for small and mid-sized off road motorcycles and ATVs. Chains are available in gold or natural finishes. Chain comes with one clip-type and one rivet-type master link. Individual master links also available separately. Tensile strength = 8000 lb.

520GDX (Chain Type B = Quadra-Ring) – Designed to reduce friction up to 40%, GYTR Quadra-Ring (X-shaped O-ring) chains last 50% longer than the conventional O-ring chains. The 520GDX can be used for all machines up to 750cc. Both chains are ideal for off-road motorcycles and ATVs. Chains are available in standard natural or gold finishes. Chain comes with one clip-type and one rivet-type master link. Individual master links also available sepa-rately. Tensile strength = 8500 lb.

520GDXL (Chain Type C = Quadra-Ring Lite) – Designed to reduce friction up to 40%, GYTR Quadra-Ring (X-shaped O-ring) chains last 50% longer than the conventional O-ring chains. The 520GDXL is a lighter version of the 520GDX for small and mid-sized machines up to 650cc. Both chains are ideal for off-road motorcycles and ATVs. Chains are available in standard natural or gold finishes. Chain comes with one clip-type and one rivet-type master link. Individual master links also available separately. Tensile strength = 8000 lb.

CHAINMODEL

CHAIN NAME/REPLACEMENT MASTER LINK

CHAIN TYPE

DISPLACEMENT LIMIT

LINKS FINISH PART NUMBER M .S .R .P .

520GDXL

GYTR Quadra-Ring Lite Chain

C Up to 650cc 120 Gold GYT-0SS55-60-42 $99.95

Repl. Clip Type Master Link

GYT-0SS56-30-88 $4.50

Repl. Rivet Type Master Link

GYT-0SS56-30-90 $3.99

520GDXL

GYTR Quadra-Ring Lite Chain

C Up to 650cc 120 Natural GYT-0SS55-60-43 $95.95


GYT-0SS56-30-89 $3.99


GYT-0SS56-30-91 $3.99

520GDX

GYTR Quadra-Ring Chain

B Up to 750cc 120 Gold GYT-0SS55-60-44 $114.95


GYT-0SS56-30-92 $3.99


GYT-0SS56-30-94 $3.99

520GDX

GYTR Quadra-Ring Chain

B Up to 750cc 120 Natural GYT-0SS55-60-45 $99.95


GYT-0SS56-30-93 $3.99


GYT-0SS56-30-95 $3.99

520GMXGYTR Non O-Ring Chain D Up to 500cc 120 Gold GYT-0SS55-60-46 $89.95


GYT-0SS56-30-96 $2.50

520GMXGYTR Non O-Ring Chain D Up to 500cc Natural GYT-0SS55-60-47 $79.95


GYT-0SS56-30-97 $2.50

520GMXLGYTR Non O-Ring Chain E Up to 250cc 120 Gold GYT-0SS55-60-48 $89.95


GYT-0SS56-30-98 $2.50

520GDO

GYTR O-Ring Chain A Up to 650cc 120 Gold GYT-0SS55-60-40 $79.95


GYT-0SS56-30-84 $2.99


GYT-0SS56-30-86 $3.50

520GDO

GYTR O-Ring Chain A Up to 650cc 120 Natural GYT-0SS55-60-41 $69.95


GYT-0SS56-30-85 $3.50


GYT-0SS56-30-87 $3.50

428GMXGYTR Non O-Ring Chain D Under 200cc 120 Natural GYT-0SS56-31-69 $42.95


GYT-0SS56-31-72 $1.95

428GMXGYTR Non O-Ring Chain D Under 200cc 120 Gold GYT-0SS56-31-70 $49.95


GYT-0SS56-31-73 $1.95

428GMXGYTR Non O-Ring Chain D Under 200cc 120 Blue GYT-0SS56-31-71 $57.95


GYT-0SS56-31-74 $1.95

428GMXGYTR Non O-Ring Chain D Under 200cc 136 Natural GYT-0SS56-31-92 $47.95


(Big Wheel)

GYT-0SS56-31-72 $1.95

428GMX

GYTR Non O-Ring Chain D Under 200cc 136 Gold GYT-0SS56-31-93 $56.95


(Big Wheel)

GYT-0SS56-31-73 $1.95

2-19

Wheels

1. YZ/ WR Off-Road Wheel Kits These complete original-equipment wheel assemblies are available for Yamaha YZ and WR models. Wheels are fac-tory assembled, ready for installation, and come complete with hub assemblies, spoke sets, rim locks, wave-style brake rotors, and oil seals. Front and rear assemblies sold separately. (See chart to the right.)

2. Rim Lock Tower NutsMachined from aircraft grade 6061-T6 aluminum. Closed nut design seals out mud and water, helping to prevent corrosion. Bevel washer design seats on the rim for a secure fit. Brilliant anodized finish.Fits all WR modelsBlackGYT-0SS55-60-24 $19.95BlueGYT-0SS55-60-23 $19.95Titanium color (not shown)GYT-0SS55-60-22 $19.95

3. Yamaha Clear GuardProtect high-wear areas on your bike using this thick 12-mil vinyl. Cut to fit from a generous 12" x 44" sheet.ABA-CLEAR-GA-RD $13.95

MODEL APPLICATION FRONT OR REAR RIM WIDTH/ DIAMETER PART NUMBER M .S .R .P

’02~’12 WR models(except WR250R/ WR250X) Front 1.60 x 21 5TJ-W2519-F0-00 $324.95

’00~’12 WR450F/ WR426F Rear 2.15 x 18 5TJ-W2539-F0-00 $499.95

1

2

3

clear guard/ gas stop valves/covers

2-20

2012WR450F

1. Gas Stop Valve“Shorty” design works on any hose-vented gas cap, alumi-num or plastic, eliminating the stock vent hose. One-way valve keeps the fuel in while allowing air to pass.Fits all YZ/ WR models (except WR250R/ WR250X)BlackGYT-0SS55-60-21 $16.95BlueGYT-0SS55-60-20 $16.95Titanium ColorGYT-0SS55-60-19 $16.95

2. Bike CoverHelps protect your bike from the elements.Fits ’90~’12 YZs & WRs (except WR250R/ WR250X)YZR-5DH93-RD-20 $89.95

3. GYTR Panel StandStrong aluminum stand with rubber top pad, tool tray, and logo display panels. 16" tall.Fits all off-road modelsGYT-YZRWK-ST-00 $94.95

4. GYTR StandStrong aluminum stand with rubber top pad and tool tray. 16" tall.Fits all off-road modelsABA-YZRWK-ST-00 $74.95

1

22

3 4

STANDS/ MATS/ GAS CANS

2-21

5. Moto Lift StandThis stand from G2 Ergonomics® features double-stem tubular construction and is far stronger than aluminum lift stands. This stand is designed to be carried by the handle unlike other stands on the market. The large handle makes it easy to lift and lower the motorcycle.For use with YZ & WR modelsGYT-0SS56-31-84 $59.95

6. M2 WORX StandRectangular access slot on top for easy oil draining. Comes complete with removable lower plastic work tray with easy to grip handles. Tray can be removed to use as an oil drain pan (easy to clean) or to hold parts and tools, keeping them out of the dirt. 100% “I Beam” ABS glass-filled plastic construction. At only 6 lb. it’s very light weight, strong, and rated at 500+ lb. Two-year limited warranty against bend-ing or breaking.For use with YZ & WR modelsa . BlueGYT-0SS56-32-15 $109.95b . Black GYT-0SS56-32-16 $109.95c . White GYT-0SS56-32-17 $109.95

7. M2 WORX Stand TrayTray works with the M2 WORX Stand or can be used by itself on the floor or on the work bench to hold parts and tools. Also works great as an oil tub/ bath for soaking your clutch plates. Side handles make it easy to put in place and remove from the M2 WORX Stand. 100% ABS plastic construction makes it light weight and very strong. Can be easily cleaned with household cleaning products. Two-year limited warranty against breaking.a . BlackGYT-0SS56-32-18 $19.95b . SilverGYT-0SS56-32-19 $19.95

5 6a

6b

7a 7b

6c

2-22

2012WR450F

PuddleBlocker

Garage Floor Protection

TM

1. Fluid Retention MatsPlace mat on garage floor, shiny side down under your motorcycle or ATV. The poly fibers will soak up fluid spills, while the poly film backing keeps it off the floor. This material withstands oil, hydraulic fluid, battery acid, and anti-freeze.3' x 10'Will fit under all Yamaha motorcycles and scootersACC-0SS58-40-33 $24.99

12-Pack Dealer Display Special(Not shown)Available for Yamaha dealers only, this 12-pack P.O.P. display box includes (12) 3' x 10' Fluid Retention Mats.ACC-0SS58-40-34 $249.99

2. ECO® Gas Cans with Spill-Proof SpoutThese rustproof, unbreakable, non-corroding fuel cans were developed by the Scepter® Corporation using patented DuPont™ laminar technology. These cans meet or exceed California’s stringent permeation-level require-ments. In addition, these cans are UL-certified to ASTM® standard PS91.00. Scepter also developed the patented “Spill-Proof Spout,” a self-venting spout that automatically shuts off when the gas tank reaches capacity.2.5 GallonMAR-CARBC-FC-25 $23.955 Gallon MAR-CARBC-FC-05 $29.955 Gallon “Jerry Can”MAR-CARBC-FC-JC $26.95Replacement “Spill Proof” Fuel SpoutMAR-CARBC-FC-SP $10.95

1

2

2-23

Yamaha genuine ReplacementpaRts

DON’T COMPROMISE THE PERFORMANCE OF YOUR YAMAHA!

Ride harder, go farther, and last longer with Yamaha Genuine PartsYamaha Genuine parts are specifically designed, manu-factured, and tested for use in Yamaha motorcycles. The specifications, materials, and compatibility are made for the exact requirements of each and every Yamaha. In fact, they are Yamaha. They are the same Genuine Yamaha parts that came on your machine when you purchased it new. So why risk using “generic” parts that cut corners so they can be used on any bike? Yamaha parts are exact fits for the Yamaha you own.

OIL FILTER

Model Part Number

’03~’12 WR450F 5D3-13440-00-00

DRIVE CHAINS

Model Part Number

’03~’12 WR450F 94581-76114-00

2-24

2012WR450F

SPROCKETS

Model Teeth Front Teeth Rear

’07~’12 WR450F 13T 5TJ-17460-00-00 50T 5TJ-25450-80-00

BRAKE PADS

Model Front Rear

’06~’12 WR450F 5MV-W0045-01-00 1C3-W0046-B0-00

AIR FILTERS

Model Part Number

’07~’12 WR450F 5UM-14451-E0-00

Custom Graphics Kits . . . . . . . . . 3-2

Custom Seat Cover . . . . . . . . . . 3-2

Zuma Full Cover . . . . . . . . . . . 3-2

Under-Seat Storage Organizer . . . . 3-3

Security Lock . . . . . . . . . . . . . 3-3

Tall Windscreen . . . . . . . . . . . . 3-3

Sporty Low Windscreens . . . . . . . 3-4

Hand Deflectors . . . . . . . . . . . . 3-4

Carbon Fiber Look Dash

Panel Accents . . . . . . . . . . . 3-4

ZUMA50F

3-2

2012ZUMA50F

1

2

3

The all-new 2012 Zuma® 50F, with its fuel-injected 4-stroke engine, is styled after the popular original Zuma 50. To go along with this great new scooter, we have been busy developing a full line of Genuine Yamaha Accessories to customize it. Looking for a sporty play bike? We have custom graphics, a two-tone seat cover, tinted short windscreen, and carbon fiber-looking dashboard panel trim. If you’re a gas-saving commuter, then check out the tall windscreen, protective hand deflectors, and handy storage-compartment carrying case. To protect your investment, there is a nice water-repellent cover to help keep it looking like new. All of these great accessories are available now. And the best part is that they’re all priced with you in mind! With fuel prices hovering near record highs, the new Zuma 50F is the ideal model; fuel-efficient, loaded with features, a full lineup of stylish and functional accessories, and all at a price that won’t break the bank!

1. NEW! Custom Graphics KitsHere’s an easy way to customize your scooter and set it apart from the pack. These kits include 11 pieces to easily customize your Zuma 50F. Peel-and-stick applica-tion allows for easy installation. Decals are 4-mil thick for durability. Available in three different color schemes to suit your individual style.Fits ’12 Zuma 50FBlue 1CD-F17C0-S0-00 $39.95Gold1CD-F17C0-T0-00 $39.95Red1CD-F17C0-V0-00 $39.95

2. NEW! Custom Seat CoverThis custom seat cover was designed specifically for the Zuma 50F. Made of marine-grade vinyl, it is both water and UV fade-resistant. Installs easily over the stock cover with a precision fit. Sleek two-tone color design gives your scooter that added custom touch.Fits ’12 Zuma 50F Black/Silver1CD-F47B0-V0-00 $69.95

3. NEW! Zuma Full CoverProtect your investment with this tailor-fit cover. Made of 300D Sur Last® solution-dyed polyester material for durability. Features a zip-out pouch that allows room for the accessory Tall Windscreen and a strong elastic cord throughout the bottom to give the cover a snug fit. Includes a heat-resistant exhaust pipe patch inside the cover. Water-repellent. Cover folds up into a convenient integrated storage bag. Features bold Yamaha and Zuma graphics.Fits ’12 Zuma 50F, ’09~’12 Zuma 125Black1CD-F81A0-V0-00 $69.95

3-3

4. NEW! Under-Seat Storage OrganizerKeep everything in its place with this textile 15-liter capacity organizer that fits conveniently in the under-seat storage compartment. Zippered lid for easy access with three zippered compartments to keep things separate and organized. Other features include a clip-type key holder and convenient carrying handle. Fits ’12 Zuma 50F, ’09~’12 Zuma 125 1CD-F847U-V0-00 $79.95

5. Security LockThis heavy-duty lock features both a key and combination lock to secure your scooter when unattended.Fits Zuma 50F and other scootersABA-3B390-00-00 $89.95

6. NEW! Tall WindscreenThis easy-to-install windshield is made of tough 4mm-thick hard-coated polycarbonate for great optical clarity. A special hard-coating process offers long lasting durability, and the nicely sized screen provides ample upper body wind protection. Fits ’12 Zuma 50F ClearABA-3B390-00-00 $89.95

4

5

6

3-4

2012ZUMA50F

1a

1b

1. NEW! Sporty Low WindscreensThese sporty looking low windscreens offer some moder-ate wind deflection. Windscreens are made of a 3mm thick acrylic material. Easy double-sided tape makes installation a snap. Two color options available.Fits ’12 Zuma 50F a . Dark Tinted1CD-F83H0-V0-00 $69.95b . Blue Chrome1CD-F83H0-T0-00 $69.95

2. NEW! Hand DeflectorsThese molded polypropylene hand deflectors are styled after those on the Zuma 125 and offer great protection from the elements. Easy bolt-on installation. Fits ’12 Zuma 50F Black1CD-F85F0-V0-00 $24.95

3. NEW! Carbon Fiber-Look Dash Panel AccentsThese adhesive dash panel pieces have the look of carbon fiber and give the dash panel on the Zuma 50F a real cosmetic upgrade. The 3M™ adhesive backing allows for an easy peel-and-stick installation. Fits ’12 Zuma 50F Carbon Fiber Look1CD-H35B0-V0-00 $39.95

32

Engine/ Performance 4-2

Exhaust 4-6

Electronic Management/ Fuel/ Intake 4-7

Chassis Protection/ Grab Bars/

Nerf Bars 4-9

Controls 4-12

Suspension/ Sprockets/ Chains 4-14

Graphics/ Seat Covers 4-17

Covers 4-18

2012YFZ450

4-2

2012YFZ450

4-2

ENGINE/ PERFORMANCE

1. GYTR® High Compression Piston KitIncrease engine compression ratio to 13.0:1 (stock is 11.2:1). Offers 1.5 to 3 hp increase throughout most of the power band. No crank rebalancing necessary. Piston is forged aluminum with machined valve pockets for addi-tional valve clearance when higher lift camshafts are used. Includes piston rings, piston pin, and clips (uses stock re-placements). GYTR Top End Gasket Kit (GYT-5TG04-10-00) required for installation. This accessory is restricted to closed-course use only [see note 1].Fits ’06~’09 & ’12 YFZ450GYT-5D305-00-00 $199.95

2. GYTR Top End Gasket KitRequired for installation of the GYTR High Compression Piston Kit (GYT-5D305-00-00).Fits ’04~’09 & ’12 YFZ450GYT-5TG04-10-00 $32.95

3. Yamaha Gasket KitsThese original-equipment Top End and Bottom End Gasket Kits were designed for more convenience and savings. They include the necessary gaskets, seals, and O-rings needed to reassemble your engine. They also include a complete part number list of ALL gaskets, seals, and O-rings for in-depth engine overhauls.Fits ’04~’09 & ’12 YFZ450Top End Gasket Kit5TA-W0001-00-00 $96.62Bottom End Gasket Kit5TG-W0002-00-00 $89.00

1. All ’06 and later Sport ATV models are regulated by the EPA. Because this accessory affects emissions using it constitutes tampering punishable by law unless the vehicle is only used in closed-course competition.

1

2

3

4-34-3

GYTR Clutch ComponentsGYTR clutch components are precision-machined from aerospace-quality aluminum alloys with a unique hard coating. This provides superior performance and clutch feel, as well as excellent component durability. The “auto oiling system” forces oil through specially cut holes in the pressure plate, into the inner hub, and then to the clutch plates. This results in improved clutch performance, with lower clutch temperatures, less clutch expansion, and extended clutch life.

4. GYTR Billet Clutch BasketPrecision machined from the highest grade of aluminum and then hard anodized to achieve an exceptionally hard, wear-resistant surface. This clutch basket provides amaz-ing race-proven durability.Fits ’07~’09 & ’12 YFZ450GYT-1S356-10-00 $209.95

5 GYTR Billet Pressure PlatePrecision machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard, wear-resistant surface for amazing race-proven durability. Additional oil passages help improve clutch performance and also contribute to a 30% weight reduction and less rotational mass for improved acceleration. Fits ’04~’09 & ’12 YFZ450GYT-5TG56-20-00 $78.95

6 GYTR Billet Clutch Inner HubPrecision machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard, wear-resistant surface for amazing race-proven durability. Additional oil passages help improve clutch performance and also contribute to a 20% weight reduction and less rotational mass for improved acceleration. Fits ’06~’09 & ’12 YFZ450GYT-5XD56-40-00 $279.95

4

5 6

YFZ450 is recommended for use only by riders age 16 years and older.

4-4

2012YFZ450

1

2

1. GYTR Billet Clutch CoverMade from 6061-T6 Billet aluminum. Gray Hard AnodizedFits ’04~’09 & ’12 YFZ450GYT-5XD35-10-AL $110.95

2. Yamaha Clutch KitsClutch kit includes OE plates, springs, and gasket.Fits ’07~’09 & ’12 YFZ4505D3-W001G-00-00 $158.99

4-5

3 Carbon Fiber Sprocket CoverDurable, lightweight carbon fiber front sprocket cover.Fits ’04~’09 & ’12 YFZ450 GYT-0SS55-90-11 $49.95

4. GYTR Billet Aluminum Front Sprocket CoverStrong 6061-T6 aluminum construction.Fits ’04~’09 & ’12 YFZ450GYT-5TA09-40-AL $61.95

5 GYTR Billet Aluminum Starter Gear CoverMade from 6061 billet aluminum. Pocketed for light weight. CNC-machined finish with GYTR logo. Fits ’04~’09 & ’12 YFZ450GYT-5TG35-40-AL $19.95

6 GYTR Magnetic Drain PlugReplace the stock steel drain plug with this 6061 billet aluminum plug. 60% lighter than stock. Includes a magnet that collects metal shavings, preventing them from circu-lating in the motor oil. Fits ’04~’09 & ’12 YFZ450a Blue18P-E51C0-V0-00 $27.95b Red18P-E51C0-U0-00 $27.95

7 GYTR Billet Aluminum Starter Block-Off PlugRequired if the starter motor is removed. Uses stock starter O-ring. Fits ’04~’09 & ’12 YFZ450GYT-5TG07-50-00 $31.95

43

5

7

6a

6b

4-6

2012YFZ450

EXHAUST

1 NEW! GYTR by FMF® PowerCore®4 Slip-On MufflerThe PowerCore®4 is designed to increase the horsepower and torque throughout the entire power curve and give you a noticeable power increase that is very usable no matter what your riding style or ability is. Features include space-age internal packing for maximum packing life. High-flow modular end cap. Internal core shape uses high-flow tech-nology. Enhanced sonic evacuation provides for higher flow and increased power. Includes removable spark arrestor. This accessory may be restricted to closed-course compe-tition only [see notes 1, 2].Fits ’04~’09 & ’12 YFZ4501PD-E47A0-V0-00 $299.95

2 NEW! GYTR by FMF® PowerBomb™ Head PipeThe Stainless Steel PowerBomb™ header incorporates a patented chamber that serves as a “pre-muffler” of sorts, which helps to lower the ATV’s sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). The PowerBomb™ module is at a precise location in the initial stage of the header, resulting in in-creased performance and flow through the expansion and contraction of exhaust sonics through the system. The re-sult is a flow increase of nearly 10%! The outer chamber in the PowerBomb™ allows the air to expand, cool, and ramp back up at a higher velocity. The PowerBomb™ provides power focused in the mid to upper rpm range.This accessory may be restricted to closed-course compe-tition only [see notes 1, 2].Fits ’04~’09 & ’12 YFZ4501PD-E46A0-V0-00 $199.95

3. GYTR 4-Stroke Exhaust PlugRubber conical plug for keeping water out of the exhaust during washing. GYTR logo flag provided as a reminder to remove. Fits 4-stroke mufflers ABA-5BE87-PL-UG $14.95

3

1

2

1. All ’06 and later Sport ATV models are regulated by the EPA. Because this accessory affects emissions using it constitutes tampering punishable by law unless the vehicle is only used in closed-course competition.2. This performance accessory does not meet California standards for off-road recreational vehicle usage regardless of model year.

4-7

ELECTRONIC MGMT/ FUEL/ INTAKE

GYTR Capacitor Kit(Not shown) If the battery is removed on ’06~’09 or ’12 models to reduce weight, this capacitor kit must be installed to avoid electrical-system damage.Fits ’06~’09 & ’12 YFZ450 GYT-5TG97-50-00 $61.95

4. Yamaha Deluxe 4-Stroke Hour Meterand TachometerYamaha’s Deluxe Engine Meter helps you keep track of your engine’s operating hours. Includes hour meter and ta-chometer functions. Also includes pre-programmed service intervals at 10 hours (initial) and every 50 hours thereafter. A flash alert displays for a 2-hour period upon reaching the specified interval.Fits all 4-stroke Yamaha modelsNOTE: Tachometer function does not work properly on 2-stroke models.

ENG-METER-4C-01 $49.95

5. Yamaha Deluxe Hour MeterIncludes pre-programmed service alert intervals at 10 hours (initial) and every 50 hours thereafter. A flash alert displays for a 2-hour period upon reaching the specified interval.Fits all 2-stroke and 4-stroke Yamaha modelsENG-METER-2C-01 $46.95

Yamaha Universal Hour Meter(Same appearance as #5 above.)Hour metering function only (i.e., no service alerting func-tion).Fits all 2-stroke and 4-stroke Yamaha modelsENG-HOURS-00-00 $39.95

4

5

4-8

2012YFZ450

1 2

3 4

1. GYTR Billet Air Filter Adaptor PlateMade from 6061-T6 billet aluminum. Allows the use of our GYTR High Flow Air Filter (sold separately) with the stock airbox.Fits ’04~’09 & ’12 YFZ450GYT-5TG95-10-00 $89.95

2. GYTR High Flow Air FilterHigh-flow gauze filter offers superior engine protection and better airflow for more power. Reusable. Service with Genuine Yamaha Gauze Filter Cleaner and Filter Oil, both available from your Yamaha dealer. Must use GYTR Billet Aluminum Air Filter Adaptor Plate. Requires Billet Air Filter Adaptor Plate (GYT-5TG95-10-00, sold separately).Fits ’04~’09 & ’12 YFZ450GYT-5TG95-01-10 $54.95NOTE: For closed-course competition. On ’04~’09 models, use the GYTR Carburetor Jet Kit (GYT-5TG98-10-00) for maximum performance.

3. GYTR Pre-FilterLess maintenance in dusty conditions. Pre-filters dirt with no critical airflow or power loss.Fits ’04~’09 & ’12 YFZ450GYT-5TG95-11-BL $19.95

4. GYTR Multi-Stage Foam FilterSpecial two-stage design for maximum airflow and superior filtration for greater engine protection. Service with Genuine Yamaha Foam Filter Oil available from your Yamaha dealer. (Not for use with Billet Adaptor Plate.)Fits ’04~’09 & ’12 YFZ450GYT-5TG95-00-00 $29.95

5. Air FilterIncreased filter area increases airflow and horsepower. Unsurpassed in airflow, dirt stopping, and overall perfor-mance. Can be easily washed and re-oiled. Designed to work with the Billet Air Filter Adaptor Plate.Fits ’04~’09 & ’12 YFZ450GYT-0SS55-90-43 $49.95

5

4-9

Chassis ProteCtion/ Grab bars/ nerF bars

6. GYTR Aluminum Engine/Frame Skid PlateHelps protect the frame, steering stem sleeve, engine, and chassis components. Strong, lightweight 0.16"-thick 5052 aluminum alloy sheet metal construction. Features drain holes for mud and water.NOTE: Cannot be installed in conjunction with Plastic Frame Glide Plate.

Fits ’04~’09 & ’12 YFZ450GYT-5TG34-00-00 $119.95

7. GYTR Aluminum Frame GuardsProtect against boot wear on your frame. Ball-burnished finish.Fits ’04~’09 & ’12 YFZ450GYT-5TG33-30-AL $81.95

8. Carbon Fiber Frame Guard Set Durable, lightweight carbon fiber cover.Fits ’04~’09 & ’12 YFZ450 GYT-0SS55-90-10 $129.95

9. GYTR Aluminum Front A-Arm Skid PlatesSpecial ball-burnished, surface-hardened finish. Helps protect the lower A-arms. Features drain holes for mud and water. Includes aircraft-quality hardware.Fits ’04~’09 & ’12 YFZ450 (with stock A-arms) GYT-5TG34-10-00 $119.95

10. GYTR Aluminum Swingarm Skid Plate High-tech, one-piece design with a brushed-aluminum fin-ish. Helps protect and complement the look of the factory aluminum swingarm. Includes aircraft-quality hardware. Fits ’06~’09 & ’12 YFZ450GYT-5TG33-00-AL $155.95

6

7 8

9 10

4-10

2012YFZ450

1. Carbon Fiber Rear Master Cylinder CoverDurable, lightweight carbon fiber cover.Fits ’04~’09 & ’12 YFZ450 GYT-0SS55-90-13 $54.95

2. Carbon Fiber Coolant Bottle CoverDurable, lightweight carbon fiber cover.Fits ’04~’09 & ’12 YFZ450 GYT-0SS55-90-12 $64.95

3. GYTR Front Grab Bar This front grab bar is constructed of a 1.5" aluminum tube “bull horn.” It incorporates a front aluminum plate that is louvered for airflow and mud resistance. Features a punch-through GYTR logo. Fits ’04~’09 & ’12 YFZ450GYT-5TG14-20-AL $150.95

4. GYTR MX Front Grab Bar This front grab bar is constructed of aluminum tubing. It incorporates a front number plate (not shown), which is attached with supplied bolts. This keeps it permanently mounted and is easy to change. Additional number plates can be purchased (GYT-5TG25-70-WH).Fits ’04~’09 & ’12 YFZ450GYT-5TG14-30-AL $94.95

5. GYTR Sport Front Grab Bar Special ball-burnished aluminum tube construction. Func-tional and sporty design.Fits ’04~’09 & ’12 YFZ450GYT-5TG14-10-00 $99.95

1 2

3 4

5

4-11

6. Yamaha Front Grab BarSpecial ball-burnished aluminum tube construction. Func-tional and stylish design. Fits ’04~’09 & ’12 YFZ450Aluminum (shown)GYT-5TG14-00-00 $152.95BlackGYT-5TG14-00-BK $159.95

7. GYTR Front/ Rear Number Plate Designed to bolt to the stock front or rear grab bar on the YFZ450. Also easy to mount to the MX Front Grab Bar (GYT-5TG14-30-AL) for the YFZ450. Requires removal of taillight.Fits ’06~’09 & ’12 YFZ450GYT-5TG25-70-WH $7.95

8. GYTR Number Plate Backgrounds for YFZ450Contains one front and two rear backgrounds. Fits ’04~’09 & ’12 YFZ450Black (shown)GYT-5TG25-BG-BK $29.95BlueGYT-5TG25-BG-BL $18.95

9. GYTR Nerf Bars Aluminum frame construction with 1.5" nylon webbing. Meets AMA®/ ATVA® regulations.For closed-course competition only. Fits ’04~’09, ‘12 YFZ450Aluminum Nerf Bars/ Black Webbing (shown)GYT-5TG31-00-00 $236.95Aluminum Nerf Bars/ Blue WebbingGYT-5TG31-KT-02 $236.95Aluminum Nerf Bars/ Red WebbingGYT-5TG31-KT-03 $236.95

GYTR Nerf Bar Replacement WebbingReplacement webbing for the accessory GYTR Nerf Bars (sold separately) for YFZ450 (same type as webbing shown in #9).BlueGYT-5TG31-00-W1 $31.95RedGYT-5TG31-00-W2 $31.95

6 7

8

9

4-12

2012YFZ450

1. GYTR Aluminum Footwells Special ball-burnished, surface-hardened aluminum is used in this tube-and plate construction. Replaces standard footwell assembly. Requires the use of the Plastic Footwell Extensions (GYT-5TG57-50-BK [Black] or GYT-5TG57-50-RD [Red]).Fits ’04~’09 & ’12 YFZ450Aluminum GYT-5TG57-00-00 $202.95

2. GYTR Plastic Footwell ExtensionsMade from high-impact plastic. Designed to attach to the Aluminum Footwells (GYT-5TG57-00-00).Fits ’04~’09 & ’12 YFZ450 with GYTR Aluminum FootwellsBlack (shown)GYT-5TG57-50-BK $29.95Translucent RedGYT-5TG57-50-RD $29.95

Controls

3. ATV Alloy Stealth Complete Racer PackThis Racer Pack includes hand guards, brackets, and hard-ware. Slim, low profile hand guard design. Aircraft quality 6061 T-6 aluminum brackets. Simple and easy to install with rotating bolt plate that allows brackets to be mounted above or below levers. Fits most Yamaha Sport ATVsBlackGYT-0SS55-90-57 $49.95BlueGYT-0SS55-90-59 $49.95White GYT-0SS55-90-58 $49.95

Replacement Brackets(Not shown)Replacement brackets for the Alloy Stealth hand guards.GYT-0SS55-90-60 $26.95

1 2

3

4-13

4. X-5 7/8" ATV Handlebar 5mm wall thickness is optimized for strength and weight. Shot peened and anodized for durability. Knurling on left grip area. Vinyl-covered bar pad gives it a “factory” look.Fits ATVs with 7/8" handlebar mountYFZ450 BendBlack (shown)GYT-0SS55-90-73 $64.99

5. Steering StabilizerGPR Stabilizers® are precision-machined for proven reliability and superior quality. Kit comes with the GPRV1 stabilizer and billet-machined mounting brackets. Easy installation provides bolt-on performance. No drilling, tap-ping, or welding required. Black Anodized Fits ’04~’09 & ’12 YFZ450 GYT-0SS55-90-70 $495.00

6. GYTR Billet Aluminum Rear Brake Pedal for YFZ450Strong, yet lightweight billet aluminum construction. Ball-burnished finish with GYTR logo.Fits ’04~’09 & ’12 YFZ450GYT-5TG37-23-00 $74.95

4

5

6

4-14

2012YFZ450

SUSPENSION/ SPROCKETS/ CHAINS

1. Yamaha Shock CoversHelps protect against rocks and debris. Heat-venting holes included for maximum performance. Easy to install and remove.Fits ’04~’09 & ’12 YFZ450Front (Sold in pairs.)a Blue FlameGYT-FSCFL-BL-05 $47.95b Silver FlameGYT-FSCFL-SL-05 $47.95Rear (Sold individually.)a Blue FlameGYT-RSCFL-BL-05 $24.95b Silver FlameGYT-RSCFL-SL-05 $24.95

2. GYTR Front Sprockets by TalonMade from heat-treated chromoly steel and CNC-machined to extremely high tolerances. Zinc finish to help combat corrosion. Sprockets feature self-cleaning grooves to shed mud and grit which saves weight.Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only because regulated exhaust emissions are affected.

Fits ’04~’09 & ’12 YFZ45013TGYT-0SS58-60-13 $22.9514TGYT-0SS58-60-14 $22.95

1b1a

2

YFZ450 is recommended for use only by riders age 16 years and older.

4-15

3. GYTR Rear Sprockets by TalonMade from 7075-T6 billet aluminum and CNC-machined for maximum fit accuracy. Features a radial mud groove etched just inside the sprocket teeth to shed mud and grit which saves weight and increases chain life. (Also see GYTR Performance Chains on page 4-16.)Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only because regulated exhaust emissions are affected.

Fits ’04~’09 & ’12 YFZ450

Anodized Blue Color36TGYT-0SS58-60-03 $59.9537TGYT-0SS58-60-04 $59.9538TGYT-0SS58-60-05 $59.9539TGYT-0SS58-60-06 $59.9540TGYT-0SS58-60-07 $59.95

Anodized Magnesium Color36TGYT-0SS58-60-08 $59.9537TGYT-0SS58-60-09 $59.9538TGYT-0SS58-60-10 $59.9539TGYT-0SS58-60-11 $59.9540TGYT-0SS58-60-12 $59.95

3

4-16

2012YFZ450

GYTR Ultra-High Performance ATV Racing Chains by EK®

520GDO (Chain Type A = O-Ring) – The GDO model is one of the finest O-ring chains on the market. The GDO chain is extremely durable with low maintenance. Chain comes with one clip-type and one rivet-type master link. Individual master links also available separately. Tensile strength = 8000 lb.

520GDX (Chain Type B = Quadra-Ring) – The GDX model is a premiere GYTR Quadra-Ring (X-shaped O-ring) chain. This chain offers the ultimate balance of performance and durability. It has up to 50% longer life with less friction than a traditional O-Ring-type chain. The GDX chain comes with one clip-type and one rivet-type master link. Individual master links also available separately. Tensile strength = 8500 lb.

520GDXL (Chain Type C = Quadra-Ring Lite) – The GDXL model is another premiere GYTR Quadra-Ring (X-shaped O-ring) chain. It has all the exceptional features of the GDX model but with significant weight savings. Like the GDX, this chain offers the ultimate balance of performance and durability. It has up to 50% longer life with less friction than a traditional O-ring-type chain. The GDXL chain comes with one clip-type and one rivet-type master link. Individual master links also available separately. Tensile strength = 8000 lb.

CHAIN MODEL CHAIN NAME CHAIN TYPE DISPLACEMENT LIMIT LINKS FINISH CHAIN PART NUMBER M S R P

520GTS GYTR Quadra-Ring Chain B Up to 1000cc 120 Gold ABA-0SS56-22-80 $194.95


520GPX GYTR Pro Race Quadra-Ring Chain B Up to 1000cc 120 Natural ABA-0SS56-22-82 $175.95


520GDXL GYTR Quadra-Ring Lite Chain C Up to 650cc 120 Gold GYT-0SS55-60-42 $84.95



520GDXL GYTR Quadra-Ring Lite Chain C Up to 650cc 120 Natural GYT-0SS55-60-43 $79.95



520GDX GYTR Quadra-Ring Chain B Up to 750cc 120 Gold GYT-0SS55-60-44 $84.95



520GDX GYTR Quadra-Ring Chain B Up to 750cc 120 Natural GYT-0SS55-60-45 $79.95



520GDO GYTR O-Ring Chain A Up to 650cc 120 Gold GYT-0SS55-60-40 $64.95



520GDO GYTR O-Ring Chain A Up to 650cc 120 Natural GYT-0SS55-60-41 $59.95



GYTR Ultra-High Performance ATV Racing Chains by EK®

4-17

Graphics/ seat covers

1. Yamaha Clear GuardProtect high-wear areas on your ATV using this thick, 12-mil vinyl. Cut to fit from a generous 12" x 44" sheet.ABA-CLEAR-GA-RD $13.95

2. NEW! ONE Industries®/GYTR Graphic KitsExclusive Yamaha design. Features durable 15-mil vinyl material with 3M™ adhesive. Allows riders to easily personalize their YFZ450. Provides protection to the tank and shroud area. Graphic kit includes decals for the tank, shroud, front cowl, front fenders, and rear fenders.Fits ’04~’09 & ’12 YFZ450 a Silver FlameDBY-ACC55-90-90 $69.95b ContourDBY-ACC55-90-91 $69.95

3. GYTR YFZ450 Graphic KitsKits designed to enhance the look of the YFZ450.Fits ’04~’09 & ’12 YFZ450 a Silver FlameKit contains gripper seat cover with sponsor section at rear.GYT-5TGK1-WH-FL $113.95b Blue StrobeThis factory style graphic kit was inspired by the Yamaha SX/ MX race team graphics. Kit includes a gripper seat cover with a rear sponsor patch.GYT-5TGK1-BL-ST $113.95

1

3b

3a

2b

2a

4-18

2012YFZ450

1. Seat CoverThis seat cover was developed with the assistance of Yamaha ATV racers Dustin Nelson and Bill Ballance; the feedback from these racers based off their extensive testing on the national circuits has yielded a superior product. The seat cover is handmade and constructed with high-quality materials for the best performance available. Panels are cut to match high-wear and rider-comfort areas, with extra padding sewn in key areas that improves the durability of the cover.BlackFits ’04~’09 & ’12 YFZ450 GYT-0SS55-90-69 $125.00

COVERS

2. Yamaha ATV CoverHelps protect your ATV while in storage. Storage bag included.Fits ’04~’09 & ’12 YFZ450Black18P-F81A0-V0-00 $89.95

2

1

GRIZZLY

Engine 5-2

Plow & Winch 5-2

Chassis Protection 5-9

Controls 5-12

Comfort 5-13

Cargo 5-13

Spraying 5-16

Hunting 5-17

Electrical 5-18

5-2

2012GRIZZLY

These accessories fit all Grizzly 700/ Grizzly 550 models unless otherwise noted 5-2

EnginE

1. Yamaha High Elevation Clutch KitRecommended for improved acceleration and pulling-power feeling above 5000 ft. elevation. Kit includes a clutch spring and weights. Will not affect stock clutch engage-ment rpm. (Dealer installation recommended.)Fits all Grizzly 700 ABA-3B456-30-00 $99.95

PLOW & WINCH

2. Yamaha Plow Kit Plows snow, dirt, gravel, and more. High-strength steel alloy blade has five angle adjustments. Kit includes heavy-duty plow mount, mounting arm, and blade assembly. Additional purchase of winch required (sold separately). See page 5-3 for replacement parts.43P-F840A-V0-00 $562.95NOTICE: If you have the Heavy-Duty Brush Guard (ABA-3B402-00-01) mounted when you install the plow, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

1

2

5-3

Quick-Detach Plow Replacement Components

3. Replacement Plow Blade AssemblyPlows snow, dirt, gravel, and more. High-strength steel alloy blade has five angle adjustments. Can be lifted with winch (sold separately). 43P-F85B0-V0-00 $250.00

Under-Chassis Mount Plow Replacement Components

4. Replacement 54" Blade Assembly Plows snow, dirt, gravel, and more. High-strength steel al-loy blade has five angle adjustments. Can be lifted using a winch, plow actuator, and/or manual lift mechanism. Lifting device and options sold separately. ABA-3B437-30-08 $220.95

5. Replacement Mounting Arm AssemblyMounting tube assembly, blade mount, blade pivot hard-ware, and spring set.ABA-3B437-20-08 $225.95

6. Replacement Wear BarFits 48" Blade (shown)ABA-4WU37-11-00 $34.95Fits 54" BladeABA-3B437-30-02 $38.95

7. Replacement J-Bolt KitABA-36682-00-00 $9.95

3

UndEr-CHASSiS MoUnT PloW KiTS & MoUnTS

Model(s) Plow Kit Kit Components M S r P

Grizzly 700 (’07~’12)Grizzly 550 (’09~’12)

ABA-3B437-00-08Plow Mount ABA-3B437-40-01

$512.85$65.95

6

4 5

5-3

7

QUiCK-dETACH PloW KiTS & MoUnTS

Model(s) Plow Kit Kit Components M S r P

Grizzly 700(’07~’12)

43P-F840A-V0-00Plow Mount 43P-F84Y0-V0-00

$562.95$132.95

5-4

2012GRIZZLY


1. Replacement Gravel Skids(Sold in pairs.)Fits 48" Blade (shown)ABA-38330-00-00 $17.95Fits 54" Blade (Heavy-Duty Skids)ABA-3B437-30-03 $27.95

2. Replacement PulleyABA-35124-00-00 $12.95

3. Plow ActuatorThe ultimate motorized plow lifting system for your plow. Provides a convenient mode of plow operation.Under-Chassis Mount – Yellow PlowABA-UXX37-50-08 $299.95Under-Chassis Mount – Black PlowABA-UXX37-50-10 $219.95

4. Plow Markers-2'These 2' high antennae are constructed of flexible material to withstand impact. Markers have red rubber tips for increased visibility; these clearly mark the edges of your plow blade even in deep snow. (Sold in pairs.)GYT-0SS56-00-01 $29.95

5. Synthetic 8' Plow Lift RopeThis 8' section of durable synthetic rope can temporarily replace your wire winch rope for the plow season; saving wear and tear on the wire winch rope. It stands up to repeated sharp angle pulls used to lift heavy plows and works on all aluminum drum WARN® ATV winches.GYT-0SS56-00-02 $43.95

6. Plastic Wear Bar-54"Constructed of 3/4"-thick ultra high molecular weight (UHMW) plastic for increased durability and wear. Excellent for use on concrete and brick surfaces, and it’s reversible, so it can simply be flipped over once it becomes worn on one side. GYT-0SS56-00-03 $49.95

7. Snow Control FlapFlap controls snow kick back; aiding in the plowing process. Constructed of flexible rubber material that stays pliable in cold weather. One size fits all plows (cut to size) and requires drilling of the plow blade to install.GYT-0SS56-00-04 $49.95

3

6

4

7

5

1 2

5-5

8. 48" Bear Force™ ATV PlowThe 48" straight plow has been the industry standard for the majority of ATVs for over two decades. This plow is manageable by smaller 4WD machines and will clear a path wide enough for them. The 48" straight plow is also well suited to larger ATVs, depending on the application. Requires ATV Push Tube Kit, ATV Plow Mount specific for your model (see chart below), and either the ATV Manual Plow Lift Kit or a winch, all sold separately. Black powder-coated finish. Dimensions: 48" length, 15-1/2" height. Weighs 47 lb.dBY-ACC56-00-12 $163.99

9. ATV Push Tube KitThe push tubes are built of heavy duty 1-1/2" steel tubing and are designed with maximum strength by triangulating the tubes. They also feature three plow swivel positions and four-way adjustment at the cutting edge. These push tubes attach to Plow Mount at the middle of the ATV with two quick pins. Bear Force™ Plow and Plow Mount sold separately.dBY-ACC56-00-13 $189.99

10. ATV Plow Mount KitThese sturdy brackets can be mounted to the middle of the ATV frame in minutes and are the only component left on the ATV when the plow is detached. The mount kits are designed not to interfere with routine maintenance, such as oil changes. (See chart below for model applications.)dBY-ACC56-00-14 $68.99dBY-ACC56-00-17 $68.99

ATV PloW MoUnT KiT APPliCATionS

dBY-ACC56-00-14 dBY-ACC56-00-17

’07 Grizzly 700 FI Auto 4x4 ’08~’12 Grizzly 700 FI Auto 4x4

’08~’12 Grizzly 700 FI Auto 4x4 EPS

’08~’12 Grizzly 700 FI Auto 4x4 EPSSpecial Edition

’09 Grizzly 700 FI Auto 4x4 EPSDucks Unlimited®

’09~’12 Grizzly 550 FI Auto 4x4

’09~’12 Grizzly 550 FI Auto 4x4 EPS

’09 Grizzly 550 FI Auto 4x4 EPS Special Edition

5-5

8

9 10

5-6

2012GRIZZLY


1. ATV Manual Lift KitRequires a low lift effort, while achieving serious lift. You’ll get at least 5-1/2" of lift with as little as 25 lb. (13 kg) of effort. The Manual Lift works for most ATVs with the Bear Force™ Plow. To help ensure safe operation, the blade locks securely in the upright position. When you’re done plowing, the whole lift removes with the push tubes, so when you’re trail riding, the equipment is not in your way. dBY-ACC56-00-18 $149.99

2. Yamaha Utility ATV Tire ChainsHeavy-duty steel chains help to provide better traction on snow and ice covered surfaces. Zinc-plated for added cor-rosion resistance.8-inchFits 22 x 10-9, 23 x 8-10, 23 x 8-12 tiresABA-29U47-00-00 $54.959-inchFits 23 x 10-10, 23 x 10-12, 25 x 8-12 tiresABA-52G47-00-00 $61.9510-inchFits 25 x 10-10, 25 x 10-12 tiresABA-59V47-00-00 $68.95

3. Yamaha 2500 lb. Winch Kit Powerful 2500 lb. load limit. Features include a sliding pin and ring gear clutch, 3-stage planetary gear train, a 154:1 gear ratio, roller disc brake, a handlebar-mounted mini-rocker switch, heavy-duty electrical contactor, color-coded 8-gauge wiring, 50 feet of aircraft-quality galvanized steel cable, hook and strap, and roller fairlead. Also includes an ignition-activated wiring system, and a mount with mount-ing hardware (when ordered as a kit). CE approved. Kit shown here; see pages 5-7~5-8 for individual replacement parts.ABA-43P69-20-08 $423.90

2

1

3

5-7

4. Yamaha 2500 lb. Winch Powerful 2500 lb. load limit. Features include a sliding pin and ring gear clutch, 3-stage planetary gear train, a 154:1 gear ratio, roller disc brake, a handlebar-mounted mini-rocker switch, heavy-duty electrical contactor, color-coded 8-gauge wiring, 50 feet of aircraft-quality galvanized steel cable, hook and strap, roller fairlead, an ignition-activated wiring system, and a mount with mounting hardware (when ordered as a kit). CE approved. Black WARN® Winch (See Chart A for Kit/Mount information)ABA-43P69-00-08 $323.95

Individual Winch Components

5. Roller Fairleads Helps guide the cable into and out of the winch drum. Replaces the hawse fairlead (included with winch on older WARN® winches). Includes four heavy-duty zinc-plated rollers to reduce cable wear, especially on pulls at severe angles. A roller fairlead is required if the winch is used for plow operation. Gold RollersABC-4SH69-50-02 $32.95Silver Rollers ABB-4SH69-50-02 $30.95

6. Aluminum Drum Winch CableOnly use with aluminum-drum (newer) winches. 50-foot cable.ABA-60076-00-00 $60.95

CHArT A (BlACK WArn® WinCH)

Model(s) Winch Kit Kit Components M S r P

Grizzly 700 (’07~’12) Grizzly 550 (’09~’12)

ABA-43P69-20-08Winch Assy.Winch Mount

ABA-43P69-00-08ABA-43P69-40-08

$423.90$323.95 $99.95

Universal Winch Kit ABA-5FU69-20-08Winch Assy.Wiring Kit

ABA-43P69-00-08ABA-5FU69-30-08

$373.90$323.95 $49.95

5-7

WINCH

CONTACTOR

ROLLER FAIRLEAD

4

5 6

5-8

2012GRIZZLY


1. Mini Rocker SwitchOnly applicable to ABA-3B469-20-00 and ABA-UXX69-10-25 (older) winch models.ABA-64851-00-00 $49.95

2. ContactorOnly applicable to ABA-3B469-20-00 and ABA-UXX69-10-25 (older) winch models.ABA-63070-00-00 $94.95

3. Wireless Winch Remote ControlA quick and easy-to-install upgrade to your WARN® winch that allows you to operate your winch from anywhere within a 50' radius. Antenna is integrated into the wire harness. Remote has large, easy-to-use power-in and power-out buttons. System automatically shuts off after 3 minutes. Handlebar holster is included.GYT-0SS56-00-05 $174.95

4. Synthetic Winch RopeThis synthetic winch rope is as strong as steel cable, easy to handle, reduces weight, and will not stretch. For use with all WARN® ATV winch kits with aluminum drums. Includes a 3' rock guard sleeve. GYT-0SS56-00-06 $119.95

5. Neoprene Winch CoverThis cover fits all 2500 lb.~3000 lb. WARN® winches. Made of durable, tight-fitting neoprene that resists wear and cracking. Provides tremendous protection for the winch.GYT-0SS56-00-07 $39.95

6. Winching Accessory KitKit includes two tree trunk protectors that provide secure anchor points and help you to secure the load you’re pull-ing, two shackles designed for ATV and Side x Side rigging while using the winch, and a snatch block that assists in double-line and angled pulls. Kit allows you to change your pulling direction and double your pulling power.GYT-0SS56-00-08 $109.95

1 2

3 4

5 6

5-95-9

CHASSIS proteCtIon

7. Yamaha OverfendersProvides a tough look and the custom-formed design helps to protect you from water, mud, and trail debris. Set of front and rear.ABA-3B466-00-00 $167.95

8. Yamaha Heavy-Duty Front Brush GuardGive your Grizzly an aggressive look and additional protec-tion while on the trail. Tough, full coverage design and ex-tended approach angle protection, front fender protection, and integrated light mount points. Black wrinkle finish.ABA-3B402-00-01 $249.95NOTICE: If you install the Yamaha Plow Kit (43P-F840A-V0-00) with the Heavy-Duty Front Brush Guard mounted, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

7

8

5-105-10

2012GRIZZLY

These accessories fit all Grizzly 700/ Grizzly 550 models unless otherwise noted

1. Yamaha Frame Skid PlateDurable yet lightweight aluminum skid plate provides protection against rocks and other objects. Strategically placed holes allow for easy maintenance and efficient mud drainage. Brushed aluminum finish. ABA-3B434-00-10 $114.95

2. Yamaha Front Bash PlateProvides lightweight, durable protection for tight approach-es, high stumps, or rocks on the trail. Brushed aluminum finish unless noted otherwise.ABA-3B431-00-00 $115.95

3. Yamaha Rear Bash PlateProvides lightweight, durable protection for the rear of the unit. Brushed aluminum finish unless noted otherwise.ABA-3B436-00-00 $125.95

4. NEW! Yamaha “Plastic Glide” PlateThis durable plastic glide plate provides a smooth, slick surface so the ATV can “glide” over trail obstacles. Con-structed of heavy-duty, 1/4"-thick ultra-high molecular weight polyethylene (UHMWPE) that provides protection to frame rails and engine chassis components. Plastic mate-rial is much lighter than traditional aluminum skid plates. Strategically placed holes allow for easy maintenance and efficient mud drainage. 3B4-F84n0-T0-00 $229.95

1 2

3

4

5-115-11

5. Yamaha Front A-Arm Skid PlatesProvides lightweight, durable protection to lower A-arms. Integrated drain holes guard against mud packing and make for easier cleanup. Brushed aluminum finish unless noted otherwise.ABA-3B432-00-00 $136.95

6. Yamaha Rear A-Arm Skid PlatesProvide lightweight, durable protection to lower A-arms. Integrated drain holes guard against mud packing and make for easier cleanup. Brushed aluminum finish.ABA-3B433-00-00 $107.95

7. CV Boot GuardsProtect your expensive CV joints, rubber boots, and drive shafts with these solid 12-gauge steel guards. Powder-coated for longevity. Guards install quickly and easily.a Front GYT-0SS56-00-10 $74.95b Rear GYT-0SS56-00-11 $74.95

5

6

7a 7b

5-125-12

2012GRIZZLY


CONTROLS

1. Yamaha Brush DeflectorsSleek, aerodynamic design features air vents to keep hands cool and comfortable while protecting them from brush and other trail debris. Made of durable polypropyl-ene. Brush Deflector Extensions (sold separately) can be installed for more deflector surface area. Brush Deflector Mounts required for installation (ATV-3B426-20-B1), sold separately. (Sold in pairs.)BlackABA-3B426-10-B1 $15.95Hunter GreenABA-3B426-10-G1 $15.95Steel BlueABA-3B426-10-l1 $15.95

2. Yamaha Brush Deflector ExtensionsThese extensions can be attached to the Brush Deflectors to increase the surface area, providing even more protec-tion. (Sold in pairs.)BlackABA-3B426-13-B1 $4.95Hunter GreenABA-3B426-13-G1 $4.95Steel BlueABA-3B426-13-l1 $12.95

3. Yamaha Brush Deflector MountsRequired for Brush Deflector installation.ATV-3B426-20-B1 $32.95

1 2

3

5-135-13

COMFORT

4. Yamaha ATV Bear Logo WindshieldConstructed of durable, clear polycarbonate. Dimensions: 20" (height), 22" (top width), 37" (bottom width)ABA-UXX03-03-00 $107.95

Cargo

5. Yamaha 2" Receiver HitchAn easy bolt-on that allows you to use a standard ball mount to haul a trailer or other implement with ease. Do not exceed recommended tongue or towing weight.ABA-3B486-00-00 $83.95

SecureMount™ SystemThe right fit the first time and every time. With Yamaha’s innovative SecureMount system, stock cargo racks can be replaced with a wide variety of other functional, hard-working accessories with an integrated design to bolt right on. These special accessories can dramatically increase your Yamaha’s usefulness, helping you get your job done sooner and more easily, and they have the quality fit and finish you expect from Yamaha, adding to your ATV’s clean appearance.

6. Cargo BoxThis molded design cargo box is loaded with features. Lid has a tongue-and-groove, rubber gasket seal that makes it water and dust-resistant. Box is designed to mount to all the SecureMount locations and has optimized cargo carry-ing capacity. Box conveniently fits on the front or rear of the unit. Includes whip mount and meets trail system require-ments. Box has a padlock provision for cargo security and peace of mind. Black matte color matches OE styling of the ATV and also does not reflect sunlight like shiny surfaces that could be a problem in hunting situations. Box has two cup holders integrated into the design for convenient use while on a break out on the trail. Box lid has two dished areas that provide a flat area or location to hold small items while at a job or hunting site. (37"L x 16"W x 11"H)3B4-F83P0-V0-00 $199.95

4

5

6

5-145-14

2012GRIZZLY


1. Front Rack ExtensionRugged design adds additional function to the standard rack. Vertical extension on three sides can help secure bags, coolers, etc. Not compatible with the SecureMount Front Large Rack. ABA-3B413-00-00 $149.95

2. Rear Rack ExtensionRugged design adds additional function to the standard rack. 6" vertical extension on three sides can help secure bags, coolers, etc. Not compatible with the SecureMount Rear Large Rack.ABA-3B473-00-00 $149.95

3. Cargo BasketSecureMount system basket allows you to carry additional items with ease. Rugged design and secure fit. Can be mounted on front or rear.ABA-3B412-00-00 $178.95

4. Utility TableSecureMount table opens to 6 feet wide. Durable rubber straps and dampers hold the table wings securely closed and reduce rattle when you ride. Table can be used as a standard rack when closed, or a multi-function work sur-face when open. Wings have a 15-pound weight capacity and should only be used when the vehicle is not in motion. Front mount only.ABA-3B476-00-00 $94.95

1 2

3

4

5-155-15

5. Large RacksSecureMount system. Large tube, lightweight design provides a rugged but sporty look. Front ABA-3B411-00-00 $159.95Rear (shown) ABA-3B471-00-00 $183.95

6. Yamaha Pop-It AntennaThe most popular whip antenna on the market. Snaps together without tools for easy transportation and storage. Includes mounting bolt. 7' x 1/4" pole, flag with Yamaha logo, and leash. ABA-PoPiT-WP-00 $32.95

7. Yamaha Deluxe Bear Logo Rack BagSoft-sided design includes a full-length zipper for easy access, and outside straps for additional attachments. Universal fit ABA-3oW53-30-BK $109.95

8. Yamaha Soft Front Rack Bag Soft-sided design includes a full-length zipper for easy access, and outside straps for additional attachments. Universal fit ABB-4SH53-30-00 $56.95

9. Yamaha Soft Fender BagSoft-sided design includes full-length zipper for easy access, and outside straps. Universal fit ABA-FEndB-AG-BK $54.95

10. Yamaha ATV Storage Cover Helps protect your ATV during storage.BlackATV-CoVEr-02-00 $99.95

6

7

10

8 9

5

5-165-16

2012GRIZZLY


SPRAYING

1. 15-Gallon Spot Sprayera PremiumFarmers, ranchers, and commercial applicators will ap-preciate the features of this boom-compatible premium sprayer. Features include a SHURflo® 2.1 gpm/ 100 psi pump, recirculation valve, TriggerJet® hand wand, 15-gallon polyethylene tank, sump with strainer, switched harness, and fused battery connector. Comes with nylon tie-down straps. Comes with MSDS (Material Safety Data Sheet) caution label that specifies what liquids you can and cannot put in the tank.Fits all Grizzly models (except Grizzly 125) and Big BearSSV-0SS56-51-13 $275.99b StandardFeatures of this sprayer include a SHURflo® 1 gpm/ 45 psi pump, economy hand wand, 15-gallon polyethylene tank, sump with strainer, On/Off switched harness, and fused battery connector. Sprayer mounts to any rack on four rubber feet. Comes with MSDS (Material Safety Data Sheet) caution label that specifies what liquids you can and can-not put in the tank.Fits all Grizzly models (except Grizzly 125) and Big BearSSV-0SS56-51-12 $165.99

2. 43" Sprayer BoomThis 43" standard boom has an 80" spray swath, three spray nozzles, and check ball valves for drip-free usage. This boom is designed to work with the 15-gallon sprayer. Boom attaches to the rear rack. Boom is made of black, powder-coated steel for long product life.Fits all Grizzly models (except Grizzly 125) and Big BearSSV-0SS56-51-16 $99.99

3. Boomless Sprayer BoomThis boomless sprayer boom has a 24" spray swath, one center spray nozzle, and check ball valves for drip-free usage. Boom attaches to the rear rack. Boom is made of black, powder-coated steel for long product life.Fits all Grizzly models (except Grizzly 125) and Big BearSSV-0SS56-51-14 $149.99

4. 96" Folding Sprayer BoomThis 96" folding boom has a 120" spray swath, four spray nozzles, and check ball valves for drip-free usage. This boom is designed to work with the 15-gallon sprayer. Boom attaches to the rear rack. Boom is made of black, powder-coated steel for long product life.Fits all Grizzly models (except Grizzly 125) and Big BearSSV-0SS56-51-15 $249.99

3 4

1a

1b 2

5-175-17

HUNTING

5. Yamaha Deluxe Gun Boot MountThis powder-coated steel mount is the convenient way to secure your gun boot to your Grizzly. This durable mount has a pivoting feature and a reinforcement strap that tightly secures the boot in place when riding in rugged terrain.Fits all Yamaha ATV Racks 1CT-K750B-V0-00 $84.95

6. Yamaha Deluxe Gun Boot with Removable Gun CaseIncludes a heavy-duty, impact-resistant Yamaha Gun Boot shell, and a convenient transport bag for your rifle.Universal fit ABA-UXX67-10-00 $99.95

7. Yamaha Gun BootIncludes a heavy-duty, impact-resistant Yamaha Gun Boot with thick pile lining. Special powder-coat paint adds cor-rosion resistance and durability, and is finish matched to the rear rack of the ATV.Universal fit ABB-4SH67-10-00 $70.95

8. Yamaha Camouflage Front Rack BagThe ultimate adventure bag. Features include a detachable map pocket, heavy-duty rubber handle, easy snap shoulder strap, lined interior, interior mesh pockets, and more. (30"L x 11"W x 8"H)Universal fit for all racksRealtree Hardwoods HD® Camo ABA-UXX53-30-Hd $119.95

5

6 7

8

5-185-18

2012GRIZZLY


1. Gripper/Gun Holder – With BracketKeep your gun, shovel, fishing pole, ice auger, and other items secure for the ride and easily within reach. Grips are textured with exclusive Rhino Teeth™ rubberized jaws for superior friction and cushioning support while clamping your gear firmly with a ratcheting action. Release their hold with a push of a button! The innovative ratchet grip design provides a custom fit for many of your tools and toys up to 2-1/2" in diameter. Includes mount plate that can accept a second pair of grippers. Can be mounted on front or rear.ABA-3B463-00-00 $78.95

2. Gripper/Gun HolderAn extra set of grippers allows you to carry a second gun or additional tools. Mounts to Gun Holder mount plate (ABA-3B463-00-00). Can be mounted on front or rear.ABA-3B463-10-00 $58.95

ELECTRICAL

3. Yamaha Deluxe 4-Stroke Hour Meterand TachometerYamaha’s Deluxe Engine Meter helps you keep track of your engine’s operating hours. Includes hour meter and ta-chometer functions. Also includes pre-programmed service intervals at 10 hours (initial) and every 50 hours thereafter. A flash alert displays for a 2-hour period upon reaching the specified interval.Fits all 4-stroke Yamaha modelsNOTE: Tachometer function does not work properly on 2-stroke models.

EnG-METEr-4C-01 $49.95

4. Yamaha Deluxe Hour MeterIncludes pre-programmed service alert intervals at 10 hours (initial) and every 50 hours thereafter. A flash alert displays for a 2-hour period upon reaching the specified interval.Fits all 2-stroke and 4-stroke Yamaha modelsEnG-METEr-2C-01 $46.95

Yamaha Universal Hour Meter(Same appearance as #4 above.)Hour metering function only (i.e., no service alerting func-tion).Fits all 2-stroke and 4-stroke Yamaha modelsEnG-HoUrS-00-00 $39.95

1 2

rhino Teeth is a trademark of Kolpin Powersports, inc rhino Teeth is not associated with the Yamaha rhino®

3

4

5-195-19

5. Yamaha 12V Accessory Plug and Receptacle KitCorrosion-resistant, marine-grade construction. The plug features an LED indicator light, patented moisture-resistant sealing ring, strain relief, and an internal 10A fuse. The receptacle includes a water-resistant sealing cap, and can be mounted from the front using the included mounting plate, or from the rear using the locking ring. The plug and receptacle feature a special locking system that holds the two together tight.12V Accessory Plug and Receptacle KitATV-12VPK-00-KT $29.95Replacement 12V Accessory ReceptacleATV-12VPC-00-rC $17.95Replacement 12V Accessory PlugATV-12VPG-00-Pl $11.95

6. HS1 35W=60W Super Plasma GT-XUpgrade BulbFor the look of H.I.D., replace stock headlight bulbs with these powerful, anti-vibration PIAA® bulbs. This bulb shines at 5000K and projects a bluish purple light. (Sold individu-ally.)Fits ’07~’12 Grizzly 700, ’09~’12 Grizzly 550 43P-H43A0-V0-00 $42.95

7. ATV Plow LightsThese lights provide additional light to the front of the ATV and are great when plowing. Plugs directly into any ATV power plug, has easy plug-in switch, and On/Off switch on the plug. Lights are adjustable (up/down and side to side). Lights fit any ATV rack. Made of black, powder-coated steel for long product life.Fits all Yamaha Utility ATV models with front rack GYT-0SS56-00-09 $99.99

5

6

7

These accessories fit all Grizzly 700/ Grizzly 550 models unless otherwise noted 5-205-20

2012GRIZZLY

1. Rubber SpotlightFeatures 70,000 candlepower sealed-beam bulb, durable and weather-resistant rubber housing, a deluxe RAM® mounting system, 10-inch coiled cable, and a 12V plug/ receptacle system.ABA-2Hr35-10-00 $77.95

1

The limited production Raider SCL comes

with genuine two-tone leather seats, Blazing

Orange paint, custom five-spoke wheels

co-developed by Star® and Performance

Machine, and plenty of chrome. You can

take your Raider SCL to the next level with

additional detailing from Star Custom Acces-

sories, including a matching genuine leather

backrest pad designed to mount on our

show-worthy chrome backrest components.

The Genuine Star Accessories and quality

accessories from some of the finest compa-

nies in the world presented here fit all Raider

models, including Raider SCL.

RAIDERSCL

6-2

2012RAIDERSCL

6-2

1

3 4

1. NEW! Raider SCL Backrest PadThis backrest pad complements the two-tone seat that comes stock on the limited edition Raider SCL. Genuine brown leather seating surface and orange stitching are the same materials used on the seat. Designed to fit all Star Custom Accessories Quick-Release and Fixed-Mount Backrests (sold separately, see page 6-4).Fits ’12 Raider SCL1US-F84B0-V0-00 $99.95

Comfort Cruise™ SeatsComfort Cruise seats offer a new dimension of riding comfort. Whether you’re going across town or across the country, Star Custom Accessories has a seat that is just right for your riding style.Features include:• Traditional styling and quality that you have come to expect from all Star Custom Accessories• Luxurious real leather seating panels• Hand-laid fiberglass seat pan for consistent fit• Soft foam edges for added comfort and protection for painted surfaces• Soft foam nose for a close fit to the tank• Foam formulation for a “soft to-touch” feel along with firmness and support for an all-day ride

2. Comfort Cruise Stiletto SeatAggressive, low-slung design with comfort to go the miles, this seat features faux rhino leather seating panel inserts. Not suitable for use as a passenger seat.STR-5C722-30-00 $374.95

3. Comfort Cruise Solo SeatThis latest generation of our Comfort Cruise seats include all the same features you have come to expect from Star Custom Accessories plus a receptacle for our adjustable rider backrest system (backrest sold separately). Looks great by itself or with our Comfort Cruise Pillion Pad (sold separately).STR-5C724-10-00 $389.95

4. Comfort Cruise Pillion PadThis Comfort Cruise pillion pad offers a new dimension of passenger comfort. Designed to coordinate with the Com-fort Cruise Solo Seat. Faux rhino leather seating inserts. Not compatible with the stock seat.STR-5C725-00-00 $249.95

2

6-36-3These accessories fit all Raider models unless otherwise noted.

6

5. Comfort Cruise Dual Touring SeatThis seat combines the comfort of a touring bike with the styling of a custom. With sculpted seating positions and leather seating panels, this seat delivers maximum com-fort. Includes a receptacle for removable rider backrest. Seat is fully compatible with our Quick-Release Backrest. Faux rhino leather seating inserts. Our removable Comfort Cruise Rider backrest (sold separately) is angle-adjustable for added comfort.STR-5C721-10-00 $499.95

6. Comfort Cruise Rider Backrest PadFits both Comfort Cruise Solo and Dual Touring Seats. Requires Comfort Cruise Rider Backrest Plug-In Bracket shown here (STR-3D821-12-00 sold separately) for instal-lation. Not compatible with stock rider seat. STR-5C721-15-00 $79.95

Comfort Cruise Rider Backrest Plug-In Bracket(Shown with Comfort Cruise Rider Backrest Pad in #6)Required for installation of Comfort Cruise Rider Backrest Pad on either the Comfort Cruise Solo or Dual Touring Seat.STR-3D821-12-00 $89.95

Mustang® SeatsAfter 30 years in the motorcycle seat business, Mus-tang® knows what it takes to make a seat comfort-able over the long haul. They start out by building their own baseplate which helps align the spine and place the driver at the proper riding angle, thereby relieving back stress. Next, each Mustang® seat is designed using special controlled-density foam, which provides the basis for its comfort. Finally, it is covered using only the highest quality expanded vinyl available with all seams double-stitched for strength and durability.

7. DayTripper™ SeatsMustang’s® advanced comfort technology has been incor-porated into this new style of custom seat. Ride low, look cool and still be comfortable at the end of the day’s ride. The detailed stitch work in the highly durable, synthetic glove-leather cover makes the DayTripper™ seat a real show winner. Never before has such a low and lean seat been available that feels this good for both the rider and the passenger.STR-0SS56-10-47 $359.95

7

5

6-4

2012RAIDERSCL

6-4

2a

3a

3c

3b

3d

2b

1

Quick-Release Passenger Backrest This uniquely styled, quick-release die-cast backrest is there when it’s needed and gone when it’s not. The lock-able base and uprights are die-cast then polished and chrome plated to a show-worthy appearance. Backrest base, uprights, and backrest pads are all sold separately.

1. Backrest BaseDie-cast and then polished and plated. STR-5C743-10-00 $389.95

2. Backrest UprightsThese backrest uprights are die-cast then polished and chrome plated to a show-worthy appearance. Uprights are available in two heights, Tall (10-1/4") and Short (7-1/8"). Designed to be used with the Quick-Release Backrest Base (STR-5C743-10-00), sold separately. Two backrest pad options available. a. Tall (10-1/4")STR-5C743-30-00 $109.95b. Short (7-1/8")STR-5C743-20-00 $99.95

3. Fixed-Mount Passenger BackrestsRaider owners can now choose between the current Quick-Release Backrest and these new laser-cut, steel, sculpted backrests. These backrests give the Raider the same fresh, edgy styling cues as the Stryker®. In addition, these back-rests offer substantial savings for owners who do not need the quick-release feature. Backrests are available in short or tall passenger heights and come finished with either brilliant chrome plating or rich, powder-coated Midnight black. (Backrest pads sold separately.)Chromea. Short (8-7/8")5C7-F84A0-V0-00 $239.95b. Tall (12") 5C7-F84A0-T0-00 $244.95Midnightc. Short (8-7/8")5C7-F84A0-S0-00 $214.95d. Tall (12")5C7-F84A0-R0-00 $219.95

6-56-5These accessories fit all Raider models unless otherwise noted.

4. Backrest PadsUniquely styled backrest pads designed for use with the Quick-Release or Fixed-Mount Backrests (sold separately).a. Custom Quick-Release PadSTR-5C740-10-00 $89.95b. Custom Fixed-Mount Pad27D-F84B0-T0-00 $89.95c. Standard Quick-Release PadSTR-5C740-00-00 $84.95d. Standard Fixed-Mount Pad27D-F84B0-V0-00 $84.95

5. Quick-Release Rear Luggage RackThis billet luggage rack is designed to be used with the Quick-Release Passenger Backrest components.ChromeSTR-5C751-30-00 $144.95

6. Fixed-Mount Rear Luggage RacksThese luggage racks are designed to fit the Raider Fixed-Mount Backrests. Separate racks are used for the tall and short accessory backrests, ensuring a perfect fit. Choose from either a brilliant chrome plated or rich, powder-coated Midnight black finish.a. ChromeFits Tall Backrest (shown)27D-F48B0-T0-00 $129.95Fits Short Backrest27D-F48B0-V0-00 $129.95b. MidnightFits Tall Backrest (shown)27D-F48B0-R0-00 $109.95Fits Short Backrest27D-F48B0-S0-00 $109.95

4a 4b

4c 4d

5

6a 6b

6-6

2012RAIDERSCL

6-6

1. Cruiselite® Custom Soft SaddlebagsCompression-molded detachable bags feature a synthetic leather finish with textured inserts, expandable from 1845 to 2711 cu. in. Maximum carrying weight limit is 7 lb. each. Requires installation of Saddlebag Support Bars (STR-5C773-40-00) sold separately.STR-5C773-70-10 $197.95

2. Cruiselite Custom Soft Tank BagCompression-molded construction allows for bold styling designed specifically for the Raider. Features include weatherproof non-glare map pocket, synthetic leather fin-ish with textured inserts, and chrome accents. A special in-ternal pocket for an iPod® or MP3 player is provided along with a water-resistant external port for the headphone wire. For carry-away convenience, the tank bag attaches with special high-strength magnets shielded to help protect electronic devices you may be carrying. Maximum carrying weight limit is 3 lb. The expandable feature increases its capacity from 346 cu. in. to over 500 cu. in.STR-5C764-21-00 $110.95

3. Saddlebag Support BarsDesigned to help keep saddlebags off the fender and allow clearance for swingarm movement. For use with or without Quick-Release Backrest. (Sold in pairs.)STR-5C773-40-00 $119.95

iPod is a registered trademark of Apple Inc.

1

2

3

6-76-7

4b

4c

4a

These accessories fit all Raider models unless otherwise noted.

4. Hard SlimbagsEnjoy spacious compartments that allow you to securely stow away your goods and keep them locked and out of the elements. Each saddlebag has over 1400 cubic inches of volume, providing you with plenty of space to store jack-ets, half helmets, and your CD changer. Hardstreet® Hard Slimbags are loaded with tons of features:• Distinct American styling• Contour back shape fits around shocks and swing arms• 1/3 more capacity than a regular leather bag• Durable Cycra® ABS Plastic -quality injection-molded fit and finish• No more fiberglass or resin smell to ruin your jacket or clothes! • Top-quality OE-grade paints and specifications• Polished base coat and clear coat provides you with the best finish available• Hardware and optional reflectors included• Secure, key lockable, and weather resistant• American designed and manufactured• Dimensions: 22" L x 10" T x 8" W• Maximum weight capacity: 11 lb. each sideHardstreet® Slimbag Mount Brackets (DBY-ACC56-12-82) are required for installation (sold separately).a. Primer (Non-painted)DBY-ACC56-12-81 $429.95b. RavenDBY-ACC56-12-78 $719.95c. Slimbag Mount BracketsDBY-ACC56-12-82 $139.95

6-8

2012RAIDERSCL

1

2

4

3

Billet MirrorsDesigned for an aggressive personality, while maintaining excellent visibility. Available in two different head shapes, and a smooth chrome finish that coordinates with Star accessories and original equipment components. Left and right hand mirrors sold separately.

1. OvalSmooth, LeftSTR-1D713-41-00 $129.95Smooth, RightSTR-1D713-42-00 $129.95

2. Tear DropSmooth, LeftSTR-1D713-21-00 $129.95NOTE: Right side mirror not available.

3. Magnum™ MirrorsKüryakyn® calls it the Magnum™ because of its rugged design. Every component has been beefed up. Unlike other flimsy mirrors, these are made super-tough. Head size is: 5-1/2" x 3". Magnum™ Mirrors have beautiful chrome plat-ing and a style all their own. (Mirrors sold in pairs.)NOTE: Mirror adaptors are required for installation and sold separately (see #6 on facing page).

Large HeadSTR-0SS56-10-97 $99.99

4. Magnum™ Plus MirrorsMagnum™ Plus Mirrors feature a stem that moves the mirror head outward 2" farther than the Magnum™ Mirror. In addition to the standard flat glass, which allows a larger image but a narrower field of view, a convex version is also available. The advantages of convex, reduced image mir-rors are two-fold: first, one has a wider field of view with this style mirror, although the image you see does appear smaller, or farther away. Second, vibration has less of a distorting effect with a convex mirror. All Magnum™ Plus Mirrors are beautifully chrome-plated. (Mirrors sold individually.) NOTE: Mirror adaptors are required for installation and sold separately (see #6 on facing page).

Magnum™ Plus Mirror – Small Head (Convex Glass) STR-0SS56-10-94 $54.99Magnum™ Plus Mirror – Large Head (Convex) STR-0SS56-10-95 $54.99Magnum™ Plus Mirror – Large Head (Flat) STR-0SS56-10-96 $54.99

6-9

6

5. Ellipse™ MirrorsThese state-of-the-art custom mirrors have a sculpted mir-ror head in a ball-and-socket mechanism that moves like silk. The oversized swivel ball offers superior locking ability. Convex glass in mirrors. (Mirrors sold in pairs.)NOTE: Mirror adaptors are required for installation and sold separately (see #6 on this page).

STR-0SS56-10-98 $109.99

6. Mirror AdaptorsThese adaptors are required for installation of Küryakyn® Magnum™ and Ellipse™ mirrors.(Sold in pairs.)STR-0SS56-10-99 $10.99

7. RAD III Teardrop Die-Cast Stem Mirrors Larger version of the popular Arlen Ness® RAD II Die-Cast Mirror but with increased reflective mirror area providing excellent visibility. DOT approved.a. ChromeLeftSTR-0SS56-11-35 $69.95RightSTR-0SS56-11-36 $69.95b. BlackLeftSTR-0SS56-11-37 $69.95RightSTR-0SS56-11-38 $69.95

5


7a

7b

6-10

2012RAIDERSCL

6-10

1. Chrome Passenger Foot Pegs with Rubber InsertsChrome-plated foot pegs designed to replace stock pas-senger pegs. All necessary hardware included for easy installation and proper fit. (Sold in pairs.)STR-5BN36-20-03 $65.95

2. Foot Pegs The ultimate in comfort and style. Billet grips are machined from 6061-T6 aluminum and chrome plated. Available matching hand grips.a. RetroFrontSTR-0SS56-11-51 $125.95RearSTR-0SS56-11-56 $125.95b. FlamedFrontSTR-0SS56-11-50 $125.95RearSTR-0SS56-11-55 $125.95c. Diamond FlatbandFrontSTR-0SS56-11-49 $125.95RearSTR-0SS56-11-54 $125.95d. Battistini Round Hole-BlackFrontSTR-0SS56-11-53 $149.95RearSTR-0SS56-11-58 $149.95e. Battistini Round Hole-ChromeFrontSTR-0SS56-11-52 $149.95RearSTR-0SS56-11-57 $149.95

3. ISO® Pegs ISO® Pegs dampen vibration while giving your motorcycle that custom look – all at the same time. The industry’s most comfortable foot pegs. Model-specific Peg Adaptors are required and sold separately.a. LargeSTR-0SS56-10-72 $39.99b. SmallSTR-0SS56-10-71 $39.99

1

2a 2b

2c 2d

2e 3

a.

b.

6-116-11

4. Flamin’ PegsFlames add class and timeless design to your bike. Coor-dinate these pegs with Küryakyn® ISO® Flame Grips for a torchin’ hot look! Model-specific Peg Adaptors are required and sold separately.STR-0SS56-10-73 $99.99

5. Pilot PegsPilot Pegs offer the same versatility as the ISO® Pegs. Model-specific Peg Adaptors are required and sold sepa-rately.STR-0SS56-10-74 $59.99

6. Peg AdaptorsKüryakyn® pegs are a 2-part system for convenience and easy installation. Simply select the foot pegs you desire and the appropriate motorcycle-specific adaptor for your bike. The serrated adaptors bite right into your foot pegs for a secure attachment, so make sure they are at the desired angle before tightening them down. This convenient 2-part system also allows you to change your pegs without purchasing new adaptors. Have a new bike? Simply switch your pegs by purchasing new adaptors. All foot pegs feature stiff rubber pads that add extra comfort while the brilliant chrome shines bright.

Front Peg AdaptorsSTR-0SS56-10-78 $24.99

Rear Peg AdaptorsSTR-0SS56-10-79 $24.99

7. ISO® Stirrup Heel RestsThe unbelievable comfort of stirrup heel rests is now avail-able for Star Motorcycles. This adjustable-height heel rest allows footboard-like support to reduce fatigue on longer rides. Sold in pairs. Pegs and model-specific Peg Adaptors are required and sold separately.STR-0SS56-10-76 $83.99

8. Round Shift Peg CoverA slick little chrome and rubber cover that replaces the stock rubber pad on shift peg.Fits Raider (Toe Shift & Brake Pad) STR-0SS56-10-91 $19.99


4 5

6

7

8

6-12

2012RAIDERSCL

6-12

1. Master Cylinder CoverBrake master cylinder installation is quick and neat; fits right over the stock lid. It’s easy and it’s cool!STR-0SS56-11-12 $79.99

2. Swingarm Axle Adjuster CoverJust big enough to add style without looking gaudy. Smart two-piece design gives you access for adjusting your belt. Sold individually just in case you’re OK with your stock muffler covering the right-side adjuster.STR-0SS56-11-08 $89.99

3. Top Belt CoverThis fully chromed replacement guard uses the stock mounting bolt locations and it’s turned down end matches the downward-sloping lines of the Raider’s rear end. Get all the function of the stock belt guard while adding style.STR-0SS56-11-09 $79.99

4. Boomerang Frame CoverThis natural transition covers the black frame rail with a flash of chrome that really catches the eye and provides a flowing appearance. This is no doubt one of the most aes-thetically pleasing additions one can make to this already beautiful motorcycle. (Fits left side only.)

STR-0SS56-11-10 $59.99

5. Chrome Fork Protector CoversThe stock black fork protectors help shield against nicks and scratches, and these peel-and-stick chrome covers provide a classy custom appearance while keeping the protection in place. (Sold in pairs.)STR-0SS56-11-11 $39.99

6. Front Caliper CoverAdd lightweight accents with the look of 6-piston styling to your front brakes and give your caliper a smooth chrome look. Covers include a solid black backer to fill in the cutout accents or leave open to match your style. STR-0SS56-11-13 $69.99

7. Tappet Block CoversAdd some sparkle to the right side of your motorcycle with these stylized chrome Tappet Block Covers. Bolt them directly over the bottom of your pushrod tubes and then stand back to admire the chrome flowing from your push-rod tubes all the way down your bike. STR-0SS56-11-14 $69.99

5

7

1

4

6

3

2

6-136-13

8. Billet Oil Filter CoverSimple design covers stock oil filter. Polished and chrome-plated for detailed appearance. Requires removal of oil filter for installation.STR-4WM27-49-02 $76.95

9. Chrome Allen Bolt PlugsNickel-chrome-plated plugs are available in three sizes to fit most of the Allen bolts found on all Star models. 5mm (Box of 20)STR-4NK26-01-20 $11.956mm (Box of 10)STR-4NK26-02-10 $7.958mm (Box of 10)STR-4NK26-03-10 $7.95

10. Custom License FramesThese custom frames are available in two finishes. Smooth style features a 1/2" round molded edge with a clear license cover and chrome backing plate. Ball milled style features chrome-plated billet-aluminum construction with Star logo and chrome backing plate. Chrome mounting hardware is included with both styles.SmoothSTR-4NK26-25-00 $59.95 Ball milledSTR-4NK27-01-03 $96.95

11. Billet License Plate FrameCompact billet license frame kit includes all hardware and backing plate. SmoothSTR-5PX27-01-01 $84.95

12. License FramesChrome-plated billet aluminum construction. Fits all Star Motorcyclesa. Radius GroovedSTR-0SS56-11-33 $59.95b. RetroSTR-0SS56-11-34 $79.95

9

11

12a 12b


8

10

6-14

2012RAIDERSCL

6-14

1. Custom “Bomber” ComponentsJeff Palhegyi has designed these custom Bomber-series components exclusively for Star Motorcycles. Bomber covers are available either polished and plated to a show-quality chrome finish or in the “Midnight” collection for a blacked-out look detailed with brushed fin edges. Bomber components have a coordinated look to give your bike a true custom look.

a. Drive Pulley Cover InsertA simple bolt on application with a radical change to the look of the motor. Replaces stock drive pulley cover insert and coordinates with other “Bomber” accessories.ChromeSTR-1D727-81-02 $65.25MidnightSTR-1D727-81-03 $65.25

b. Clutch Cover InsertA simple bolt on application with a radical change to the look of the motor. Replaces stock clutch cover insert and coordinates with other “Bomber” accessories.ChromeSTR-1D727-43-02 $64.56MidnightSTR-1D727-43-03 $65.40

c. Starter CoverSimple bolt on design covers the existing starter end cap for a clean finish. Coordinates with other “Bomber” acces-sories.ChromeSTR-1D727-46-02 $53.91MidnightSTR-1D727-46-03 $53.91

d. Ignition CoverReplace your plain stock ignition cover with this totally redesigned cover to complete the “Bomber” package.ChromeSTR-1D727-27-00 $76.86MidnightSTR-1D727-27-01 $76.86

e. Generator Cover InsertA simple bolt on application with a radical change to the look of the motor. Replaces stock generator cover insert and coordinates with other “Bomber” accessories.ChromeSTR-1D727-47-02 $37.49MidnightSTR-1D727-47-03 $37.49

JEFF PALHEGYI SIGNATURE SERIES -Custom accessories from one of today’s top bike buildersBike builder Jeff Palhegyi is the architect of many of the most ad-mired customized Star motorcycles ever crafted. His creative work has appeared in top motorcycle shows and has been frequently featured in Custom Star calendars. Those lucky enough to own a motorcycle from Palhegyi Designs can count on attracting plenty

of attention. Palhegyi’s talent and creative vision have earned him recognition as one of the world’s top custom bike designers. His artistry has been acknowledged in over 40 articles in national magazines, and he has made many TV appearances, including documentaries on the SPEED Channel® (“V-Twin TV” and “Epic Rides”). Palhegyi customs have also been showcased in the International Motorcycle Shows® (IMS) Tour in the United States, the Tokyo Motor Show in Japan, and INTERMOT® and Milan shows in Europe.

1

1

Chrome Bomber Components

Midnight Bomber Components

a. b.

c. d. e.

f. g.

h.

a. b.

c. d. e.

f. g.

h.

6-156-15

f. Cam Cover InsertA simple bolt on application with a radical change to the look of the motor. Replaces stock cam cover insert and coordinates with other “Bomber” accessories.ChromeSTR-1D727-41-02 $23.82MidnightSTR-1D727-41-03 $23.82

g. Master Cylinder Cover SetAttach these to the clutch and front brake master cylinders for a personalized, highly polished, chrome-plated look.ChromeSTR-1D718-10-01 $55.66MidnightSTR-1D718-10-02 $55.66

h. Primary Drive Cover InsertA simple bolt on application with a radical change to the look of the motor. Replaces stock primary drive cover insert hiding the fill level plug and coordinates with other “Bomber” accessories.ChromeSTR-1D727-82-02 $59.58MidnightSTR-1D727-82-03 $59.58

Complete “Bomber” KitsComplete kit includes all components listed above.Chrome1D7-BOMBR-CH-00 $437.13Midnight1D7-BOMBR-MD-00 $437.97

2. Custom “Hot Rod” ComponentsThe newest line of custom accessories from designer and master builder Jeff Palhegyi – the “Hot Rod” Collection. This line-up was designed exclusively for Star Custom Accessories and combines classic design with an innovative flair that really sets your Raider apart from the crowd. Seven different covers are available and each sold separately. This full collection delivers the high level of quality, fit and appearance that you have come to expect from Star Custom Accessories.

a. Drive Pulley Cover Insert1D7-E54D0-V0-00 $119.95

b. Clutch Cover Insert1D7-E54E0-V0-00 $99.95

c. Starter Cover1D7-E54F0-V0-00 $99.95

d. Ignition Cover1D7-E54H0-V0-00 $129.95

e. Generator Cover Insert1D7-E54A0-V0-00 $64.95

f. Cam Cover Insert1D7-E54B0-V0-00 $49.95

g. Master Cylinder Cover Set1D7-F58D0-V0-00 $99.95

2

Custom Chrome “Hot Rod” Components(as shown above)

Custom Chrome “Bomber” Components(as shown on facing page)

3

3. Clutch Bleeder CoversWith its simple single bolt installation, the clutch cover adds a finished, custom look to the engine. The covers are available in either a Midnight black or show chrome finish and coordinate nicely with the “Bomber” and “Hot Rod” collection of Star Accessories.Chrome1D7-E63D0-S0-00 $59.95Midnight1D7-E63D0-R0-00 $52.95

Clutch Bleeder Covers


a. b.

c. d.

e.

f. g.

6-16

2012RAIDERSCL

6-16 ** Height measured from the top of the headlight cutout to the top of the windshield.

1. Quick-Release WindshieldMade of tough 4.5mm polycarbonate treated with the new-generation Quantum™ coating to provide a long lasting, durable, protective finish. This makes the windscreen three times more scratch-resistant than typical acrylic products, and also much more resistant to damage from bugs, stone chips, road grime, or even everyday cleaning. This extra at-tention to detail will help keep your windshield looking new longer, and that’s a clear benefit you’ll enjoy on every ride.

Available in two heights**. The unique quick-release feature allows you to quickly change your windshield before riding due to a change in weather or attitude. A lock is included for added security. Available in chrome-plated or powder-coated Midnight black trim. Replacement windscreens are also available. Quick-Release Windshield Mounts (STR-5C703-41-00) are required for installation, sold separately.

a. ChromeTall Windshield (19"**)5C7-F83J0-T0-00 $425.95Short Windshield (14"**)5C7-F83J0-S0-00 $415.95

b. NEW! MidnightTall Windshield (19"**)5C7-F83J0-R0-00 $425.95Short Windshield (14"**)5C7-F83J0-P0-00 $415.95

Tall Replacement Windshield STR-5C703-11-00 $133.95Short Replacement WindshieldSTR-5C706-11-00 $123.95

2. Quick-Release Windshield MountsThese quick-release mounts allow you to easily change out your accessory windshield. Required for installation of Quick-Release Windshield (Tall or Short), sold separately.STR-5C703-41-00 $149.95

3. Boulevard™ WindscreenThis 10-3/4" high** windscreen is made of tough 4.5mm polycarbonate with new generation Quantum™ Coating. Smoked shield trim provides unique styling and deflects wind from your chest area. Includes polished stainless steel mounting hardware. Choose from either a brilliant chrome-plated or a rich, powder-coated Midnight black. a. Chrome STR-5C705-30-00 $179.95b. NEW! Midnight 5C7-F83J0-N0-00 $179.95

1a 1b

3a 3b

2

6-176-17

4

4. SwitchBlade® 2-Up® WindshieldsThe largest of the SwitchBlade® windshields, this generous screen offers maximum protection from wind and weather for both you and your riding partner. Many riders purchase windshields primarily for wind protection, and the 2-Up®, like all SwitchBlade® windshields, features high-quality chromed steel and stainless steel hardware. Best of all, its sturdy 4.0mm thick polycarbonate has National Cycle’s® exclusive Quantum™ hard coating for the ultimate in scratch resistance. All National Cycle® polycarbonate wind-shields are covered by a 3-year limited warranty against breakage.NOTE: SwitchBlade® Quick-Release Mounts are required for installation and sold separately (see page 6-18).

ClearSTR-0SS56-12-07 $244.95

5. SwitchBlade® Chopped™ WindshieldIs the 2-Up® too tall? Shorty™ too short? The new Switch-Blade® Chopped™ is a cut-down version of the popular SwitchBlade® 2-Up®. The recontoured top is 4" to 5" shorter (depending on model) and the trimmed bottom pro-file is narrower. Get all the protection you need and the look you want. All National Cycle® polycarbonate windshields are covered by a 3-year limited warranty against breakage.NOTE: SwitchBlade® Quick-Release Mounts are required for installation and sold separately (see facing page 6-18).

a. ClearSTR-0SS56-12-11 $229.95b. TintedSTR-0SS56-12-15 $234.95

5a

5b

These accessories fit all Raider models unless otherwise noted.SwitchBlade® windshields shown on V Star 1300.

6-18

2012RAIDERSCL

6-18

1. SwitchBlade® Shorty™ Windshield The smaller screen of the Shorty™ windshield is an ideal choice for a rider who generally does not put long hours in the saddle. Short in size but long on looks and quality features. The Shorty™ keeps the windblast at bay while preserving the “wind in your face” motorcycling experi-ence. All National Cycle® polycarbonate windshields are covered by a 3-year limited warranty against breakage.NOTE: SwitchBlade® Quick-Release Mounts are required for installation and sold separately (see below).

a. ClearSTR-0SS56-12-19 $199.95b. TintedSTR-0SS56-12-23 $204.95

2. SwitchBlade® Quick-Release Mount System Strong, sleek, elegant, and functional! This system secures your SwitchBlade® windshield with bulldog tenacity, but is attractive and refined when the shield is off. Our innovative Cushion Wheel spools turn and flex, allowing the shield to lock into place with a reassuring “pop.” Want to remove or change the shield? A gentle tug is all that’s needed. Each SwitchBlade® windshield and Mount Kit is model-specific. These are not universal fitments that work fine on some models and work poorly on others. When you order the SwitchBlade® Mount Kit and any SwitchBlade® windshield for your motorcycle, you can be sure it will fit like it was custom made for your bike – because it was!STR-0SS56-12-28 $124.95

1a

1b

2

SwitchBlade® windshields shown on V Star 1300 and Road Star models.

6-196-19

3. Cruise Series Windshields The Cruise Series Windshields from Sportech™ offer good wind protection without compromising your bike’s appear-ance. Sportech™ has streamlined the necessary mounting brackets and excess hardware, eliminating the typical crossbars to minimize the visual impact the windshield makes on your bike. The result is a lighter weight wind-shield with less cumbersome hardware. Keep the focus on your bike where it belongs, not on the windshield. A line of premium windshields packed with features never before available to the cruising rider:• Custom-molded from premium Lexan® polycarbonate with FMR hard coating• 20X the impact-resistance and abrasion resistance of acrylic (Lucite®)• Patented toolless quick-release mounting hardware allows installation and removal instantaneously• Premium stainless steel hardware has a brilliant, highly polished finish• All that remains on the bike when the windscreen is removed are two small polished stainless steel handl bar mounting clamps• Available as a Low height (15" x 14") in clear and smoked tinted, a Medium height (20" x 19.5") in clear and tinted, and a Tall height (22" x 23") in clear • Profiles engineered to offer excellent head and chest protection from wind and debris, while maintaining a sleek, unobtrusive look• Exclusive limited lifetime warranty against cracking and breakageTall-ClearSTR-0SS56-12-05 $415.95Medium-ClearSTR-0SS56-12-03 $394.95Medium-TintSTR-0SS56-12-04 $405.95Low-Clear (not shown)STR-0SS56-12-01 $299.95Low-TintSTR-0SS56-12-02 $299.95

4. Passing LampsTotally unique design. These passing lamps have 35-watt halogen bulbs and incorporate DOT-approved LED turn signals/marker lights, eliminating the stock turn signals. A new mounting system allows for easy adjustment and wiring into an integrated wire harness. Passing Lamp Mounts (STR-5C735-40-00) required for installation, sold separately.Passing LampsSTR-5C735-10-00 $261.95 Passing Lamp MountsSTR-5C735-40-00 $104.95

3

4


6-20

2012RAIDERSCL

6-20

1a

2

1b 1. Engine Guards1" diameter polished and chrome-plated tubing designed to match the Raider’s wild style. Choose from either a brilliant chrome-plated or a rich, powder-coated Midnight black. a. ChromeSTR-5C731-10-00 $236.95b. NEW! Midnight5C7-F43B0-T0-00 $209.95

2. Billet Rear Fender RackThis billet rear fender rack is made of 6061 machined billet-aluminum. Available in polished chrome-plated or powder-coated Midnight black finish. Works with either the stock solo or Comfort Cruise seats. Requires removal of passenger seat.Chrome (shown)STR-5C751-40-00 $177.95 NEW! Midnight5C7-F48C0-V0-00 $172.95

3. Wide Style LeversThese chrome levers are wider than stock for great comfort. STR-0SS56-11-06 $49.99

4. Contour Renthal® Wrapped GripsThe Contour Grips will complete any 1" handlebar set up. Each grip is forged from billet aluminum, machined to perfection, then wrapped with Renthal® rubber for the comfort and function. The Renthal® rubber helps keep the rider’s hands from slipping and actually reduces fatigue while riding. a. ChromeSTR-0SS56-12-61 $119.99b. Black AnodizedSTR-0SS56-12-62 $119.99

3 4a

4b

6-216-21

Avon®

Avon® proudly introduces its line of premium grips for the metric cruiser market. Handcrafted in the U.S.A., Avon® grips are made of Kraton® rubber and feature a soft, serrated texture that makes it easy to hold on. The end caps and collars are machined from billet 6061 aluminum, polished then finished in either chrome or black anodize. All of Avon’s® new metric grips also feature a very unique, patent-pending throttle sleeve that comes complete with interchangeable throttle cams allowing a single set of grips to have multiple fitments, eliminating the need for excessive dealer inventory.

5. Air Cushioned Touring Grips “Air ride for your hands!” These grips feel great and are very functional too. Manufactured in the U.S.A. with a special core bar that creates air pockets inside the grip body. These air pockets dampen vibrations, help eliminate the tingle in your hands, and soften the overall feel of the ride. The soft, serrated texture on the grip surface helps you hold on to your bike with confidence. The grips are finished off with only the best 6061 billet aluminum end caps and collars.a. ChromeSTR-0SS56-12-54 $59.95b. Black AnodizedSTR-0SS56-12-55 $59.95

6. Custom Contour Touring Grips“Contoured for your hands, custom for your bike!” The Avon® Custom Contour grips just feel right in your hands. Manufactured in the U.S.A. with Kraton® rubber. Features a very soft, serrated texture to help hang on to your bike. Finished off with only the best-6061 billet aluminum end caps and collars. Available in either chrome or black anod-ized finishes. a. ChromeSTR-0SS56-12-52 $59.95b. Black AnodizedSTR-0SS56-12-53 $59.95

5a

5b

6a 6b


6-22

2012RAIDERSCL

6-22

1. ISO® Grips Combining style and comfort, these grips provide a soft, non-slip surface that dampens operating vibration. Re-cessed areas between the ISO® Pads permit air movement for added comfort in hot weather. The knurled accent rings add a touch of class.a. ChromeSTR-0SS56-11-00 $74.99b. NEW! BlackDBY-ACC56-12-84 $74.99

2. ISO® Flame Grips ISO® Flame Grips have a unique flamed pattern in the soft and cushy rubber pads. Finished off with a Maltese Cross-emblazoned end cap and trim ring for that additional bad attitude look. This grip accepts the wildly popular Küryakyn® ISO® Throttle Boss (available from Küryakyn®), which aids your hands on long rides.STR-0SS56-11-01 $74.99

3. Grip End WeightsGrip End Weights quickly install on the end of each grip, adding mass and length to further reduce high amplitude handlebar vibration. Their sculpted appearance and bright chrome finish also add a high-tech look to your already hot looking grips. STR-0SS56-11-07 $39.99

1a 1b

2

3

6-236-23

4. Hand Grips The ultimate in comfort and style. Billet grips are machined from 6061-T6 aluminum and are chrome plated. Available matching foot pegs.a. GroovedSTR-0SS56-11-39 $125.95b. Knurled Flare TipSTR-0SS56-11-48 $119.95c. Diamond FlatbandSTR-0SS56-11-40 $125.95d. Multi-BandSTR-0SS56-11-41 $125.95e. RetroSTR-0SS56-11-45 $125.95f. FlamedSTR-0SS56-11-43 $125.95g. TwisterSTR-0SS56-11-42 $125.95h. Battistini Round Hole-BlackSTR-0SS56-11-44 $149.95i. Battistini Round Hole-ChromeSTR-0SS56-11-47 $149.95

4a

4b 4c

4d 4e

4f 4g

4h 4i


6-24

2012RAIDERSCL

1. Custom CoverThis unique and versatile cover accommodates a fully ac-cessorized Raider while maintaining a custom-fit look. The top half uses premium Evolution® 4 fabric that is breath-able, water repellent, and UV-resistant. Incorporates an ex-pandable backrest pocket. The bottom half is constructed of duck canvas for heat protection against exhaust pipes. Both materials provide excellent outdoor protection.(Not recommended for trailering.)STR-5C728-00-00 $144.95

Progressive Suspension® was founded in 1982 by two industry icons with decades of experience between them and the sin-gular goal of creating high performance motorcycle suspension. Within a few years the company and the team of devoted employees would meet this goal and soon began besting even their own work. Progressive Suspension® is now the largest aftermarket motor-cycle suspension manufacturer in the United States as well as a supplier of suspension components to a number of domestic original-equipment customers. By combining the use of the latest in design, rapid prototyping, and testing equipment with a dedicated team of professionals, Progressive Suspension® continues to stay at the forefront of innovation.

2. 465 Series ShocksTime to lower your Raider or change the suspension? The completely new Progressive 465 Series shock has a high pressure gas monotube shock design. These shocks are designed and tuned specifically for the Raider utilizing a 46mm bore with a deflective disc piston for precise damping, and the beefy 16mm hard chrome shaft rides on custom Viton® seals for low friction and leak-free life. The shock’s CNC-machined aluminum body is threaded and an easy-to-use 5-position rebound adjuster allows for fine tuning to match your riding style and load. Standard HeightDBY-ACC56-12-65 $495.951" Lower HeightDBY-ACC56-12-66 $495.95

1

2


Off-Road Accessories 7-2

Sport ATV Accessories 7-7

Star Accessories 7-8

Yamaha Maintenance Series Tools 7-9

NEWFOR2012

7-2

2012NEWFOR2012

OFF-ROAD MOTORCYCLE

1. NEW! GYTR® by FMF® Factory 4.1™ Special Edition MufflerThis all-new Special Edition Muffler provides the very highest levels of technology, performance, and of course, “cool.” The custom carbon fiber end cap and blue anodized shell give this muffler a cutting-edge factory appearance along with state-of-the-art performance. It’s the complete package! The Factory 4.1™ Muffler incorporates the latest FMF® Resonance Chamber Technology®. The patented chamber design enhances and refines exhaust pressure. Its patented core shape lowers sound level while maintaining maximum power output, and the patented canister shape increases internal volume for more sound-absorbing mate-rial. Factory Forward Engineering centralizes mass and is less prone to impact damage. Maintenance is made easy with the removal of four screws on the front end cap, and the innovative rear end cap simplifies installation of the spark arrestor (sold separately, 33D-E46C0-R0-00) or tun-ing tip inserts. Includes QuietCore™ 94 dBA insert. Meets AMA® and FIM sound requirements. Compatible with stock or FMF® header. Built 100% in the U.S.A.YZ models are for closed-course use regardless of modification.Fits ’10~’12 YZ450FDBY-ACC56-34-37 $499.95Fits ’10~’12 YZ250FDBY-ACC56-34-38 $549.95

2. NEW! GYTR by FMF® Mini PowerCore®4 MufflerThis “Mini” PowerCore®4 is the best “bang for your buck” bolt-on muffler for your mini. You’ll swear the motor has been bored and stroked with the first twist of the throttle. Has an aircraft-grade aluminum can, durable stainless steel header, high-flow stainless steel core and formed end cap. Comes with USFS-approved spark arrestor for sanctioned off-road competition events that require one. Lighter than the stock muffler.For closed-course competition use only (see footnote below).Fits ’08~’12 TT-R1105B6-E46D0-V0-00 $199.99

2

1

This accessory affects emissions; installation on EPA-regulated 2006 or later TT-R models constitutes unlawful tampering except when used solely for closed-course competition.

7-3

3. NEW! Super Mini 105cc Cylinder KitThis complete cylinder kit includes a new nickel-carbide plated cylinder with enlarged water passages and revised porting designed specifically for this kit. The cylinder head is also newly designed with increased water passages. Kit has everything needed for a complete installation except required crankcase machining. Includes cylinder, cylinder head, precision-made piston with rings, clips, wrist pin, studs, nuts, O-rings, and gaskets (different thickness base gaskets to adjust squish). YZ models are for closed-course use regardless of modification.Fits ’02~’12 YZ85KitDBY-ACC56-34-16 $699.99

4. NEW! Super Mini 112cc Cylinder KitThis complete kit includes a new precision-made, stroked crankshaft and nickel-carbide plated cylinder with enlarged water passages and revised porting designed specifically for this kit. The cylinder head is also newly designed with increased water passages. Kit has everything needed for a complete installation except required crankcase machin-ing. Includes crankshaft, connecting rod, cylinder, cylinder head, precision-made piston with rings, clips, wrist pin, studs, nuts, O-rings, and gaskets (different thickness base gaskets to adjust squish).YZ models are for closed-course use regardless of modification.Fits ’02~’12 YZ85KitDBY-ACC56-34-17 $919.95

Individual Athena® Replacement Components(Not shown)105cc/112cc Piston Kit (A) DBY-ACC56-34-18 $199.95105cc/112cc Piston Kit (B) DBY-ACC56-34-19 $199.95105cc/112cc Top End Gasket Set DBY-ACC56-34-20 $29.95105cc CylinderDBY-ACC56-34-21 $399.99105cc Cylinder Head DBY-ACC56-34-22 $204.95112cc Cylinder DBY-ACC56-34-23 $412.95112cc Cylinder Head DBY-ACC56-34-24 $204.95112cc Crankshaft DBY-ACC56-34-25 $229.95

3

4

7-4

2012NEWFOR2012

1. NEW! Super Mini 105cc/112cc Exhaust Pipe & SilencerThis exhaust system was designed and built in conjunction with 105cc/112cc Super Mini engine kits. The thin wall cone and stamp construction optimizes strong mid and top-end power and gives a pure raw factory look while improving performance over stock and other aftermarket YZ85 exhaust systems. The rebuildable silencer is con-structed from lightweight carbon fiber and stainless steel and uses a unique adjustable O-ring bracket for a perfect fit. Exhaust Pipe and Silencer sold separately.YZ models are for closed-course use regardless of modification.Fits ’02~’12 YZ85 with 105cc or 112cc Super Mini Cylin-der KitExhaust PipeDBY-ACC56-34-26 $279.95SilencerDBY-ACC56-34-36 $129.95

2. VForce®3• Snaptogetherdesignforreedpetalchange• Ultraefficientforincreasedthrottleresponse,and acceleration• Symmetricalreedpetals,eliminatinginnerandouter

petals• Twicethereedtipsurfaceforgreaterefficiency,airflow,

increased power, plus less petal wear• Utilizesadvancedcompositetechnologywithanallnew

carbon fiber lay-up and resin system on the petals• Customairguidesformaximumairflowforincreased

horsepowerFits ’05~’12 YZ125DBY-ACC56-34-31 $159.95Fits ’05~’12 YZ250DBY-ACC56-34-33 $159.95

1

2

NEW! VForce®3 High Performance Reed Valve SystemThe simple premise of the VForce®3 Reed Valve System is to increase engine power and throttle response by increasing the efficiency over a con-ventional reed valve design. The unique design of the VForce®3 Reed Valve System features double the reed tip surface over a conventional reed valve design. This has two major benefits: • Thereedpetalsonlytravelhalfthedistanceofa

conventional reed valve design to get the same airflow

• Withlessdistancetotravel,thereisagreaterchance that the petals will be fully opened as well as a better chance of sealing when they are “closed”

YZ85 shown here with Athena® Super Mini Exhaust Pipe and Silencer (shown in #1 above)

7-5

4

5

3. VForce®3i• Sharesmanyofthesamefeaturesasitsbigbrother• Newlydesignedintakebootwithcentralizedopening offers straight shot directly into the engine case• Newlydesignedreedstopstoincreasepetalstabilityfor

controlled petal opening• Shorterreedcageallowsuseoflighterpetalsto increase overall performance• Customdesignedintakeboottoensuremaximum

performanceFits ’02~’12 YZ85DBY-ACC56-34-29 $169.95

Replacement Petals(Not shown)Fits ’02~’12 YZ85 DBY-ACC56-34-30 $69.95Fits ’02~’12 YZ125 DBY-ACC56-34-32 $69.95Fits ’02~’12 YZ250DBY-ACC56-34-34 $69.95

4. NEW! AIR4ORCE™ High Performance Tunable Intake SystemReplaces stock air intake boot. Custom designed to allow maximum air volume. Includes interchangeable velocity stacks to fine-tune power delivery. Long velocity stack increases bottom-to-mid power with excellent accelera-tion. Short velocity stack gives stronger mid-to-top power with awesome acceleration.Fits ’10~’12 YZ250FDBY-ACC56-34-35 $299.95

5. NEW! AmPro™ Graphic Kit for YZ450FYamaha Parts & Accessories introduces a new exclusive AmPro™ Graphic Kit from ONE Industries®. Made from du-rable 15-mil vinyl material with 3M™ adhesive. Kit includes tank shroud, swingarm, and fender decals. Decals feature the Yamaha, GYTR, Yamalube, ONE Industries®, and FMF® brand logos.Fits ’10~’12 YZ450FDBY-ACC56-34-15 $59.95

3

7-6

2012NEWFOR2012

1. NEW! MotoStand & MotoPad TracksideThe MotoStand is an affordable, injection-molded bike stand that won’t scratch your bike. Great styling with a tough non-slip rubber top. Many 5-gallon gas cans fit securely inside the stand when upside down for efficient transport. Yamaha graphics on both sides. The MotoStand is designed to be used with the MotoPad Trackside (sold separately). Utilize the part trays on the MotoPad Trackside and keep the parts that keep your machine running clean and free of debris while adding a nice, clean touch to your pit area. Also folds in half when you’re done to save space in your truck or garage.ForusewithallYamahaYZandWRmodelsa MotoStandDBY-ACC56-34-28 $69.95b MotoPad TracksideDBY-ACC56-34-27 $159.95

1a 1b

Image shows both items a & b

7-7

SPORT ATV

2. NEW! GYTR by FMF® PowerCore®4 MufflerThe PowerCore®4 is designed to increase the horsepower and torque throughout the entire power curve and give you a noticeable power increase that is very usable and beneficial no matter what your riding style or ability is. The mufflers are constructed from aircraft grade aluminum and stainless steel for durability under the harshest conditions. Features include space age internal packing for maximum packing life, high-flow modular end cap, and an internal core shape that uses high-flow technology. Enhanced sonic evacuation provides for higher flow and increased power. Includes removable spark arrestor.For closed-course competition use only (see note 1 below).Fits all Raptor 700R models (shown)1S3-E47A0-V0-00 $299.99Fits all Raptor 250 models1BT-E47A0-V0-00 $299.99Fits all Raptor 125 models2PA-E47A0-V0-00 $249.99

3. NEW! GYTR by FMF® PowerBomb™ Head PipeThe Stainless Steel PowerBomb™ is a four-stroke header that incorporates the patented PowerBomb™ module at a precise location in the initial stage of the header. By posi-tioning this “Bomb” at a key point in the system, increased performance and flow are achieved through the expansion and contraction of exhaust sonics through the system. The result is a flow increase of nearly 10%. The outer chamber in the PowerBomb™ allows the air to expand, cool, and ramp back up at a higher velocity. Additionally, the Pow-erBomb™ is a “pre-muffler” of sorts, which helps to lower the bike’s sound output by providing more sound absorbing surface area for the sound medium (exhaust gases). The PowerBomb™ provides power focused in the mid to upper rpm range.For closed-course competition use only (see note 1).a Fits all Raptor 700R models1S3-E46A0-V0-00 $279.99b Fits all Raptor 250 models1BT-E46A0-V0-00 $199.99Fits all Raptor 125 models2PA-E46A0-V0-00 $199.99

1 All ’06 and later Sport ATV models are regulated by the EPA. Because this accessory affects emissions using it constitutes tampering punishable by law unless the vehicle is only used in closed-course competition.

2

3a

3b

7-8

2012NEWFOR2012

STAR MOTORCYCLES

1. ISO® Grips Combining style and comfort, these grips provide a soft, non-slip surface that dampens operating vibration. Re-cessed areas between the ISO® pads permit air movement for added comfort in hot weather. The knurled accent rings add a touch of class. Also now available in a powder-coat-ed black version for a sinister appearance.Fits all Star models except V Star 250a ChromeSTR-0SS56-11-00 $74.99b NEW! BlackDBY-ACC56-12-84 $74.99

2. NEW! iSimple® GateWay™ iPod® AdaptorThe iSimple® is a plug-and-play device that allows an iPod to be controlled using factory audio controls on the Star Royal Star Venture model. Allows the use of an iPod for hours of personalized tunes. Compatible with iPod mobile devices that use a 30-pin connector, including an iPhone® (not compatible with iPod shuffle®). iPod charges when connected to the iSimple® system. Cannot be used in conjunction with Clarion® 6-disc CD changer.Fits ’98~’11 Royal Star Venture models* 1BM-H81C0-T0-00 $224.95 *NOTE: An additional cable is required for fitment on ’99~’08 models (STR-CDCHG-11-00) unless CD changer (STR-CDCHG-10-01) was previously installed.

iPod, iPhone, and iPod shuffle are registered trademarks of Apple Inc.

iPod not included

1a

1b

2

7-9

TOOLS

YAMAHA MAINTENANCE SERIES TOOlS

3. NEW! Yamaha Screwdriver SetAll of the screwdrivers in this five-piece set are made of heat-treated alloy steel to prevent chipping and rounding of the tips. The bi-mold rubberized grips are comfortable and allow you to maximize torque. Set includes two flathead and three Phillips tip screwdrivers. Set carries the Yamaha lifetime limited warranty.DBY-ACC58-41-51 $39.95

4. NEW! Yamaha Wrench SetThis high-quality wrench set is precision-crafted from special alloy steel for strength and finished in a polished nickel-chrome for corrosion resistance and a distinctive look. Five-piece set includes 8, 10, 12, 14, and 17mm com-bination wrenches and a convenient tool bag. Set carries the Yamaha lifetime limited warranty.DBY-ACC58-41-52 $49.95

5. NEW! Yamaha Pliers SetThis three-piece set includes side cutters, needle nose, and standard pliers. Each tool is built with control, comfort, power, and durability in mind. Cold forged from special alloy steel for increased strength from top to bottom. Features include contoured handles with comfortable grips that give you the leverage you need, joints that are positioned close to the cutting edge, making it easier to cut heavy wire with less fatigue, and tapered blades that give you more power around the joint and more control at the tip. Set carries the Yamaha lifetime limited warranty.DBY-ACC58-41-50 $33.95

6. NEW! Grip Nose PliersThese pliers are a great addition to every toolbox. The unique monster-like teeth on the end of the jaws are shaped to grip damaged screw heads for easy removal. It is also ideal for gripping the back side of the rivets to prevent spinning when drilling them out. The rubberized grips are comfortable and cold forged jaws means these pliers are built to last.MTS-TLSKT-01-07 $43.18

7. NEW! Safety Wire PliersSafety wire pliers are a must for every serious racer’s toolbox. These are manufactured from high-quality tool steel and allow you to grip, cut, and twist the safety wire in one quick motion. The safety wire (sold separately) is high-quality, 0.032"-diameter stainless steel and conforms to AMA® tech specifications.

SafetyWirePliersMTS-TLSKT-01-05 $34.95SafetyWire(1/4-lb.package)MTS-TLSKT-01-06 $6.95

7

5

3 4

6

7-10

2012NEWFOR2012

1. NEW! 5/8" Spark Plug Socket SetThe thin wall design of the socket fits in tight spaces and can be turned using either a 14mm wrench or standard 3/8" ratchet. The set also includes a unique two-step ex-tension that can be used in either a swivel or fixed position and can be turned with a bar, 14mm wrench, or standard 3/8" ratchet.MTS-TLSKT-02-02 $20.99

2. NEW! Timing Plug DriverThis handy tool fits the straight-slot timing plugs on most motorcycles and ATVs, preventing damage caused from using a standard screwdriver blade. The blade sizes are 16, 22, and 38mm.MTS-TLSKT-02-03 $17.95

3. NEW! Clutch Boss HolderManufactured from medium carbon steel with hardened jaws, this specialty tool holds clutch hubs, flywheels, gears, and sprockets. The adjustable jaws open up to 5".MTS-TLSKT-03-01 $32.95

1

3

2

Dealers:To help display the tools on your showroom floor, a “Yamaha Maintenance Series” point-of-purchase display is available; contact your FSM or ISR for more details.

7-11

4. NEW! Flywheel PullerThese high-quality flywheel pullers are manufactured to meet exacting standards set by the Yamaha service techni-cians and are designed for specific applications.

a For’04~’12WR450F,’04~’12YFZ450/R/XMTS-TLSKT-02-04 $39.95b For ’06~’12 YZ450F MTS-TLSKT-02-05 $36.99c For ’01~’12 YZ250F/ YZ250/ YZ125/ YZ85MTS-TLSKT-02-06 $19.95d For’03~’12WR250F,’03WR450FMTS-TLSKT-02-07 $49.95

5. NEW! Oil Filter WrenchThis stamped steel, chrome plated filter wrench makes removing oil filters a breeze. Simply place the wrench over the end of the filter and turn it using either a 3/8" ratchet or 17mm wrench. Two sizes will cover all Yamaha spin-on style filters.For 3FV and 5GH Yamaha Oil FiltersMTS-TLSKT-02-09 $10.95For 5DM Yamaha Oil FiltersMTS-TLSKT-02-10 $10.99

4a 4b

4d4c

5

7-12

2012NEWFOR2012

1. NEW! Carburetor Tool SetDesigned specifically for Keihin® FCR carburetors on YZs, this tool set contains longer bits for reaching into recessed cavities to make quick adjustments. Set is ideal for race tuning. Includes a 6mm hex for main jets, long-reach straight slot for pilot jets, 3mm Allen for removing the float bowl, and a convenient thumb ratchet with a cap compart-ment that will hold a few spare main jets. MTS-TLSKT-04-02 $15.95

2. NEW! Jet Cleaning ToolThese precisely machined rods are sized to allow you to clean out carburetor jets without causing damage. A very handy tool for regular carburetor maintenance. MTS-TLSKT-04-03 $9.95

3. NEW! Spring Hook PullerThis handy tool is great for removing exhaust pipe springs, seat or tank holding springs, cotter pins, side stand springs, and other parts.MTS-TLSKT-05-01 $16.95

4. NEW! Shock Preload AdjusterAllows adjustment to the shock spring preload without damaging the shock or spring collars. Its hardened steel construction is designed to last, and with its hinged design, you can use it on a wide variety of collars ranging from 2"~4-3/4". Perfect for every rider’s toolbox.MTS-TLSKT-06-07 $22.95

5. NEW! Adjustable Steering Stem WrenchNo need for a hammer and screwdriver to adjust your steering stem nut, this handy wrench can be used for loosening and tightening notched steering stem nuts and adjusting shock preload. It’s adjustable, fitting stem nuts from 22~70mm, so it works on most bikes. It also has a 3/8" torque wrench opening for precise adjustments.MTS-TLSKT-06-08 $24.95

1

3

5

2

4

7-13

6. NEW! Suspension Sag ToolThis handy tool can be used to check front or rear suspen-sion sag on both mini and full-size motorcycles. The scale reads in both inches and metric and has an adjustable zero set point for direct scale reading (no subtracting required). It also has an adjustable pin that fits hollow axles. Durable 6061-T6 aluminum construction. Unique folding design allows it to fit into most toolboxes.MTS-TLSKT-06-06 $36.99

7. NEW! Fork Cap Ring Nut WrenchThis 49mm, 8-point box wrench is designed for removing the fork cap (cartridge) on dual-chamber, closed-cartridge forks. Includes a 12mm slot to hold the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg. Manufactured from 6061-T6 billet aluminum with a blue anodized finish. Fits ’08~’12 YZ450F/ YZ250F/ YZ250/ YZ125 MTS-TLSKT-06-04 $19.95

8. NEW! Fork Cap WrenchDesignedtoworkwiththeForkCapRingNutWrenchtoremove the base valve from the fork cartridge. Fits ’08~’12 YZ450F/ YZ250F/ YZ250/ YZ125 MTS-TLSKT-06-05 $14.95

9. NEW! Fork Oil level GaugeThis gauge is ideal for accurately checking and adjusting the oil level on all conventional and single-chamber car-tridge forks. The adjustable ring will measure oil levels from 0~300mm in 0.5cm increments and the included syringe has a fluid capacity of 60ml.MTS-TLSKT-06-01 $21.99

10. NEW! Fork Seal DriversInnovative ringer design makes these easier to use than pin-aligned drivers. Perfectly weighted to drive seals. The secure, no-slip grip locks body halves together during use so there is no more worrying about part of the tool falling off and damaging fork legs. The body halves are machined from durable carbon steel, finished with a high-quality, protective, black e-coat for durability. The anodized alumi-num ring has a knurled finish that makes it easy to handle. Available for 36 and 48mm fork tubes.36mm Fork TubeMTS-TLSKT-07-08 $44.9948mm Fork TubeMTS-TLSKT-06-02 $44.95

11. NEW! Fork Damper Cartridge HolderThis tool is required to hold the fork damper cartridge in place while separating the upper fork tube from the lower fork leg. Fits’08~’11WR450F/WR250FMTS-TLSKT-06-03 $69.99

6

7 8

9

10 11

7-14

2012NEWFOR2012

1. NEW! 16" Curved Tire IronThis 16" tire iron is manufactured from cold forged steel and has a double-compound-curve for added leverage.MTS-TLSKT-07-06 $15.50

2. NEW! Tire Iron AssortmentThis three-piece set includes an 8.5", 11", and 16" curved tire iron. All are made from cold forged steel for strength and durability.MTS-TLSKT-07-07 $28.95

3. NEW! Spoon Tire IronsThe curved ends of these 10" tire spoons fit securely in the hand and are finished in hard nickel pewter. The width at the spoon is 25mm and they weigh only 4.2 oz. (Sold in a package of two.)MTS-TLSKT-07-09 $29.95

4. NEW! PBR Chain ToolThis chain tool does everything. The innovative design allows you to press, break, and rivet 520, 525, and 530 O-ring and non O-ring chains. The function can be changed by simply moving the anvil block. All components store on tool when not in use. All steel construction with heat-treat-ed components for strength and durability.MTS-TLSKT-07-10 $95.95

5. NEW! Spoke Wrench Assortment KitProbably the last spoke wrenches you will need to buy. The 10 interchangeable tips are made of heat-treated steel for strength. The main shaft is CNC precision machined from 7075A aluminum and designed for optimum grip. Heads included are 5.0, 5.4, 5.6, 5.8, 6.0, 6.2, 6.4, 6.6, 6.8, and 7.0.MTS-TLSKT-07-03 $29.99

6. NEW! Universal Spoke Wrench This is the original 6-in-1 spoke wrench. Fits most common spokes and is small enough to carry in your tool pack.MTS-TLSKT-07-04 $6.99

1 2

3

4

5 6

Yamaha Motor Corporation, U.S.A.6555 Katella AvenueCypress, CA 90630

yamaha-motor.com

©2011 Yamaha Motor Corporation, U.S.A. All rights reserved. Printed in U.S.A.

Manufacturer’s suggested retail prices are shown. Prices may vary due to supply, freight, etc. Actual prices set by the dealer. Product and specifications subject to change without notice. Availability subject to production, stocking, and demand.

This document contains many of the valuable trademarks and marks owned by Yamaha throughout the world. The document may also contain references to other company, brand, and product names that may be trademarks/service marks of their respective owners. Except where noted, these company, brand, and product names are used herein for identification purposes only, and references to any names, marks, products, or services of third parties do not constitute or imply endorsement, sponsorship, or recommendation of third party or the product or services. iPod, iPhone, and iPod shuffle are registered trademarks of Apple Inc.

Professional riders depicted on a closed course. Off-road action photos shot on private land.

ATVs with engines of 70cc to 90cc are recommended for use only by riders age 12 years and older, and always with adult supervision. ATVs over 90cc are recommended for use only by riders age 16 years and older. Yamaha recommends that all ATV riders take an approved training course. For safety and training information, see your dealer or call the ATV Safety Institute at 1-800-887-2887. ATVs can be hazardous to operate. For your safety: Always avoid paved surfaces. Never ride on public roads. Always wear a helmet, eye protection and protective clothing. Never carry passengers. Never engage in stunt riding. Riding and alcohol/drugs don’t mix. Avoid excessive speed. And be particularly careful on difficult terrain.

LIT-10080-FL-12

2012 YAMAHA ACCESSORIES UPDATE CATALOG

Documents

Transcript of 2012 YAMAHA ACCESSORIES UPDATE CATALOG