2011 Catalogue Environmental Hygiene & Site Safety Solutions

Spill Containment& Storage

Spill Control

Bins & Waste Recycling Systems

Skin Care & Industrial Hygiene

Plant Safety & Maintenance

Site Facilities

2011 Catalogue

Environmental Hygiene & Site Safety Solutions

Spill Control Spill Control

Spill Control Introduction 4Maintenance Absorbents & Pads 5Maintenance Rolls 6All-in-One Absorbent 7Maintenance Socks 8Maintenance Drum Toppers 9 & Cushions Oil Only Absorbents 10Oil Only Rolls & Cushions 11Oil Only Marine Booms 12Chemical Absorbents 13Absorbent Dispenser Stands 14 & Stations Rapid Response Spill Trolley 15UniSorb™ Loose & Granular 16 Absorbents Drain Protection 17Drain Covers 18Drain Protection Products 19Spill Barriers & Demarcation Paint 20Spill Response Training 21 & Site Surveys Special Value Spill Kits 22Portable Rapid Response Spill Kits 23Vehicle Spill Kits 24Premium Range Spill Kits 25Spill Kit Accessories 27Salt/Grit Bins & Spreaders 28

P.4Spill Absorbents

P.17Drain Protection

P.22Spill Kits

Product IndexPage 176–178

Spill Containment & StoragePages 29–68

Bins & Waste Recycling SystemsPages 113–126

Skin Care & Industrial HygienePages 137–175

Plant Safety & MaintenancePages 69–112

Site FacilitiesPages 127–136

Spill ControlPages 3-28

WELCOME TO OUR 2011 CATALOGUE

Contact our customer support & sales team

0845 0700 624F: 0845 0700 623 E: [email protected] www.unisanuk.com

Contents

Unisan are one of the most unique environmental hygiene and site safety specialists in the UK!

Our full understanding of the needs and requirements of your industry has enabled us to offer you a proven and tailor-made approach with problem solving solutions that you can trust.

We help to take the weight off your shoulders and give you peace of mind, by providing high quality products and services at excellent value for money!

We provide a consultancy service to carry out full risk assessments and site surveys, to help keep your workforce safe and productive and help you comply with ever-changing regulations.

Terms & Conditions Page 179

10 Good reasons to deal with Unisan:

1 Expert industry knowledge2 Free technical support and advice 3 Product trials, site surveys and samples4 Large innovative range of industry

specific products 5 Excellent quality products, yet still good

value for money6 Efficient and reliable service—next day

delivery on most stock items7 Easy to order— call us, fax us, email us or

visit our website 8 ISO 9001 approved company9 Price match promise10 Spill control and skin care training

Our Mission is:

– To protect the environment– To provide excellent quality and innovation– To always give superb customer service– To ensure total customer satisfaction

Certificate No. GB2003237 Registration No. 0044/1

ISO 9001Registered Firm

InternationalAccreditation Board

PR

ICE MATCH

£PROMISE

E&OE – All prices subject to VAT

2 3

Spill Control

Spill Control

T 0845 0700 624 F 0845 0700 623 E [email protected] W www.unisanuk.com T 0845 0700 624 F 0845 0700 623 E [email protected] W www.unisanuk.com

Spill Control Introduction

Are you still struggling with mess and hassle caused by Primary Absorbents (Granules) when dealing with spills on your site?

Maintenance A

bsorbents & Pads

Spill Control Introduction

Maintenance AbsorbentsThese absorbent products are very versatile and are designed to absorb and contain all non-aggressive fluids, both oil and water based

features: – Soak up and retain spilt liquids quickly– High absorbent capacity– Cost effective, clean and simple to use– Strong and highly durable– Absorb liquids such as oils, fuels, water, coolants, solvents, mild acids and alkalis

Maintenance Pads

features: – An excellent solution for dealing with everyday spillages and leaking machines

around the workplace– The main use of pads in spill kits is to absorb the majority of the spilt liquid once

the spill has been contained– Excellent for general wiping and for placing dirty/oily components and tools on– Dimpled for extra strength– Made of high quality, bonded, melt-blown polypropylene – Just one Heavyweight Pad will absorb up to 1L of liquid!!

MAINTENANCE ABSORBENTS & PADS

code description packing size (mm) pack qty absorb cap

MT8002 Heavyweight Bonded Pads Dispenser Box 400 x 500 100 100L

MT8003 Heavyweight Bonded Pads Bag 400 x 500 100 100L

MT8006 Lightweight Bonded Pads Dispenser Box 400 x 500 200 100L

MT8007 Lightweight Bonded Pads Bag 400 x 500 200 100L

FOR OIL ONLY PADS SEE PAGE 10FOR CHEMICAL PADS SEE PAGE 13

Here are 6 good reasons why you should stop using granules and convert to secondary absorbents:

1. Health and SafetyGranules are a slip hazard. An accident in the workplace could Iead to serious cost consequences to the company's time, image and wastes money

2. Save Time and LabourGranules are very messy and take longer to clean up and dispose off. Secondary absorbents are strong, fast absorbing and quick and easy to clean up

3. EffectivenessClay granules do not really absorb the spill. The granules just become coated with the liquid, which eventually starts to seep through. Secondary absorbent pads and socks are far more absorbent and far less wasteful. For example, our 1.2m absorbent socks will absorb up to 5.4L and the 3m socks will absorb up to a massive 14L!!

4. Potential Damage to Machinery and the EnvironmentGranules can be very abrasive and could potentially cause hundreds of thousands of pounds worth of damage if they accidentally enter expensive machinery. Contaminated granules often get trodden around buildings and get spread around yards. They then get washed into drains, leading to contamination of waterways

5. WeightBags of granules are heavy and awkward and are difficult to deploy quickly and easily in the event of a spill. The average weight of a bag of granules is 18–20kg. One box of 100 pads only weighs 8kg and will absorb more than 11 times the amount!

6. Lower Disposal CostsUsed granules have to be treated as hazardous waste and are very heavy and bulky. They take up a lot of space in hazardous waste bins which means the bins have to be emptied more often, resulting in higher disposal costs. Secondary absorbents take up less space in waste bins and they can also be incinerated, which helps to reduce disposal costs

You can now improve your housekeeping and clean up spills more effectively with Secondary Absorbents (Pads, Rolls, Socks, Cushions)

Three Different Types of Absorbents:

Maintenance (Grey Products)Multi-purpose absorbents for Oils, Fuels, Water, Coolants, Solvents and Mild Acids/Alkalis. The most cost effective absorbents for indoor applications (see pages 5 – 9)

Oil Only (White Products)Absorbents for Oil, Fuel, Solvents and Petrochemicals – Not Water or Coolants (Hydrophobic – Will repel water). Use outside, ideal for absorbing oil off water (see pages 10 – 12)

Chemical (Yellow Products)Special absorbents for most Acids, Solvents and Caustics. Safe to use with most chemicals.(see page 13)

AfterBefore

Perforated

Problem Solution

4 5

Spill Control

Spill Control


Maintenance Rolls

code description packing size mm pack qty absorb cap

MT8021 Traffic Mat Roll – Unbacked Bag 910 x 91m 1 150L

MT8022 Traffic Mat Roll – Backed Bag 910 x 45m 1 50L

Maintenance Traffic/Pit Mat Rolls

features: – Very durable and wear resistant, absorbent mat to absorb leaks, drips, spills and overspray– Use in walkways, corridors and areas where there is a lot of foot and forklift traffic– Help to prevent slips and trips, when fixed down with suitable double sided tape– Dark grey colour helps to hide the grime so that mat can be used for longer– Preserve floors from oil, grease and grime – save on dilapidation charges– Anti-slip backing option available – helps to ensure mat doesn’t move– Limit the amount of water coming into your warehouse from forklift

wheels during wet weather

Maintenance Rolls

features: These are a very versatile absorbent. The rolls can be used:– To roll out on walkways and large areas to catch leaks and overspray– To line toolboxes and maintain clean work stations, surfaces and equipment– To lay beneath anti-slip/anti-fatigue matting, helps prevent slips– As tear-off pads for general wiping and absorbing spills– To help improve your housekeeping and keep your facility looking clean

and professional

The rolls are perforated and easy to dispense. They are an efficient and cost effective method for absorbing spills

Our absorbents can be dispensed in a number of different ways. We have flexible dispensing options to fit every need and application. Please see page 14 for options

MAINTENANCE ROLLS


MT8010 Heavyweight, Perforated Roll Dispenser Box 380 x 45m 1 86L

MT8011 Heavyweight, Perforated Roll Bag 380 x 45m 1 86L

Half Width Rolls

MT8015 Lightweight, Perforated Roll Dispenser Box 500 x 88m 1 100L

MT8016 Lightweight, Perforated Roll Bag 500 x 88m 1 100L

MT8013 Heavyweight, Perforated Roll Dispenser Box 500 x 45m 1 100L


3/4 Width Rolls



Full Width Rolls



Narrow Width Rolls


MT8090 Heavyweight All-in-One Roll Dispenser Box 380 x 45m 1 86L

Maintenance All-in-One AbsorbentMulti-purpose absorbent roll – it’s a roll, it’s a sock, it’s a pad, it’s a wipe

features: – Excellent solution where storage space is limited– All-in-One product means you can carry less stock– Comes on a roll packaged in a handy dispenser box– Heavyweight – super absorbent capacity of 86L– Perforated so it's easy to tear off the correct amount to wipe down equipment

or clean up spills. Helps reduce wastage because you only take as much as you need– Super fast wicking clean up spills quickly and easily– Perforated scores allow easy folding; forms a thick ‘sock’ to catch leaks and drips– Use as a durable roll to absorb dirt and grime and help prevent slips and trips

It's a Roll

It's a Sock

It's a Pad

It's a Wipe

Maintenance A

ll-in-One A

bsorbent & Traffi

c/Pitmat Rolls

FOR ROLL

DISPENSERS

SEE PAGE 14

MAINTENANCE ALL-IN-ONE ABSORBENT

6 7

Spill Control

Spill Control


Maintenance D

rum Toppers &

Cushions

Maintenance Socks

Maintenance Drum ToppersAn innovative product to help keep your 210L drums clean and drip free

features: – Do away with drum drips, puddles and dirty rags– Allows you to work quicker, cleaner and safer, no more oil on the floor– With pre-cut holes to fit on your drums and around bung openings– Highly absorbent with great retention ability to hold spilt liquids– Maintenance and Oil Only versions available

Please see pages 62–63 for our range of Drum Taps/Pumps to help you dispense liquids with ease

MAINTENANCEDRUM TOPPERS

MAINTENANCE SOCKS


MT8020 Maintenance Drum Toppers Bag 560 Dia. 25 25L

OL8530 Oil Only Drum Toppers Bag 560 Dia. 25 25L


MT8031 Large Cushions Dispenser Box 300 x 350 20 90L

MT8032 Extra Large Cushions Dispenser Box 400 x 500 16 160L

Drum Toppers

Cushions – Maintenance

Maintenance SocksA fast and easy way of keeping your workplace clean and safe

features: – Our absorbent socks are made with a knitted outer skin which allows liquids to be

absorbed much quicker. It also allows the ability to expand freely as the inner expands– Massive absorbent capacity

Our 1.2m socks will absorb up to 5.4L Our 3m socks will absorb up to a massive 14L

– Excellent retention of liquids, once they have been absorbed– Fit tightly around the base of leaking machines, containers and storage tanks.

Good for lining around drips trays and ledges– Socks hug the floor tightly, following the contours of the floor surface to ensure

100% containment– Clean and simple to use – do away with messy granules


MT8024 Maintenance Socks Dispenser Box 80 x 1.2m 20 108L

MT8027 Maintenance Socks Dispenser Box 80 x 3m 8 110L

Maintenance CushionsOnce a spill has been contained, it is important to absorb the liquids off the floor as quickly as possible

features: – For high-volume leaks and spills, when there’s a need for more capacity than

pads will absorb– Excellent solution for catching machine and drum leaks and for repair jobs– Can be used to seal drain gratings in the event of a spill, when there’s no drain

cover available– Ideal for soaking up oil in potholes on roads or unmade ground– Just 1 Extra Large Cushion will absorb up to 10L of liquid!!

Absorbtion rate after 5 minutes – The proof is in the absorbing!!

Don't risk socks that 'gooseneck'...

Competitor's Sock

Competitor's Sock

Unisan Sock

Unisan Sock

Spill & Slip Hazard

5L 2L

8 9

Spill Control

Spill Control


Oil O

nly Rolls & Cushions

Oil O

nly Absorbents

Oil Only AbsorbentsHydrophobic absorbents, which means that they do not absorb water and will float on water even when saturated, ideal for outside use

features: – Absorb oils, fuels, solvents and petrochemicals from water– Most cost effective absorbents for use in bunds and separation pits, on outfalls,

rivers, lakes, harbours and lagoons– White in colour – alerts you to any leaks/spills from machinery, drums or barrels– Help to prevent damage to the environment and wildlife

Oil Only Pads

features: – Soak up and retain spilt liquids quickly– Convenient, versatile solution to enable quick spill clean up– Help to remove potential slip hazards– Bonded – for extra strength and durability– Just one heavyweight pad will absorb up to 1L of liquid!!

OIL ONLY ROLLSOIL ONLY ABSORBENTS


OL8524 Oil Only Socks Dispenser Box 80 x 1.2m 20 90L

OL8527 Oil Only Socks Dispenser Box 80 x 3m 8 90L

Socks – Fast Absorption


OL8502 Oil Only Pads Dispenser Box 400 x 500 100 120L

OL8503 Oil Only Pads Bag 400 x 500 100 120L

Bonded Lightweight Pads

OL8506 Oil Only Pads Dispenser Box 400 x 500 200 100L

OL8507 Oil Only Pads Bag 400 x 500 200 100L

Bonded Heavyweight Pads

Ideal for outside use – Absorbs oil, not waterAlso suitable for inside use – bright white colour shows up potentially dangerous machine leaks

Oil Only Socks

features: – Ideal for outdoor spill applications and drum storage areas– Totally repel rainwater and absorb oil-based liquids only– Huge absorbent capacity – 1.2m sock absorbs up to 5.4ltrs

Oil Only Rolls

features: – For use between railway lines, under garage car ramps, walkways, corridors etc– Collects oil, fuel drips and leaks from machinery and vehicles– An effective and safe method of preventing contamination of track ballast on

railway lines and unmade ground in quarries etc– Oil Only makes it ideal for outdoor use (Repels water)


OL8509 Bonded, Perforated Roll Dispenser Box 380 x 45m 1 86L

OL8510 Bonded, Perforated Roll Bag 380 x 45m 1 86L

Heavyweight Rolls – Half Width

OL8514 Bonded, Perforated Roll Dispenser Box 500 x 45m 1 100L


Heavyweight Rolls – Full Width


Heavyweight Rolls – Narrow Width

Oil Only Cushions

features: – Rapidly absorb oily spills to help minimise environmental damage – Cushions will float on water, even when fully saturated– Large surface area and absorbent capacity– Very strong outer– Just one extra large cushion will absorb up to 10L of liquid!!


OL8531 Large Cushions Dispenser Box 300 x 350 20 90L

OL8532 Extra Large Cushions Dispenser Box 400 x 500 16 160L

Before

10 11

Spill Control

Spill Control


Chemical A

bsorbents

Oil O

nly Marine Boom

s

Oil Only Marine BoomsHelp to minimise environmental damage on land or water. If oil or fuel is spilt and runs into water it needs to be contained – Oil Only booms are the solution!

– Highly effective absorbent for spills in water applications due to their ability to float even when saturated

– For use on waste water troughs, outfalls, streams, rivers, lakes, harbours and lagoons

– Can be used to contain spills in the outdoors, even in the rain– Made with strong external net fabric, complete with hooks and rings – Booms can be clipped together to encircle and contain very large spills


OL8562 Standard Booms Bag 120 x 3m 4 195L

OL8563 Extra Large Booms Bag 200 x 3m 4 300L

OL8564 Super Size Booms Bag 200 x 6m 2 300L

Chemical AbsorbentsSpecial absorbents for aggressive and non-aggressive liquids such as acids, solvents, oils and caustics

features: – Designated yellow in colour for instant visual recognition that hazardous

substances are being absorbed and to avoid improper use– Suitable for applications from large chemical spills to cleaning up small,

everyday, benchtop spills– Ideal for laboratories, chemical storage plants, pharmaceutical manufacturing

and other industries– Specially treated to ensure that they do not degrade upon contact with

aggressive, corrosive and concentrated liquids


CH9002 Bonded Pads Dispenser Box 400 x 500 100 100L

CH9003 Bonded Pads Bag 400 x 500 100 100L

Lightweight Pads

CH9006 Bonded Pads Dispenser Box 400 x 500 200 100L

CH9007 Bonded Pads Bag 400 x 500 200 100L

Socks – Fast Absorption

CH9024 Chemical Socks Dispenser Box 80 x 1.2m 20 80L

CH9027 Chemical Socks Dispenser Box 80 x 3m 8 80L

Heavyweight Pads

CHEMICAL ABSORBENTS

OIL ONLY MARINE BOOMS

Oil Only Mini Marine BoomsRemove oil and fuel from the water in your sump, bilge tank or pit

– A simple, safe, convenient and effective solution– Includes strong rope for easy retrieval– Made with strong external net fabric, complete with retaining ring– Help your company preserve the environment and meet ISO 14001

standards– Don’t risk fines and consequences of having oil wash down your drains

into the nearby watercourses


OL8565 Mini Marine Booms Bag 500 x 200 10 120L


CH9009 Heavyweight, Perforated Roll Dispenser Box 380 x 46m 1 75L

CH9010 Heavyweight, Perforated Roll Bag 380 x 46m 1 75L

Heavyweight Rolls – Half Width

CH9012 Heavyweight, Perforated Roll Dispenser Box 500 x 45m 1 100L


Heavyweight Rolls – Full Width


Cushions

CH9031 Large Cushions Dispenser Box 300 x 350 20 90L

CH9032 Extra Large Cushions Dispenser Box 400 x 500 16 160L

Heavyweight Rolls – Narrow Width

Leave in drains to collect oil drips from vehicles

12 13

Spill Control

Spill Control


Rapid Response Spill Trolley

Absorbent D

ispenser Stands & Stations

code description absorb cap

AS9420 All-in-One Absorbent Station (Maintenance) 308L

AS9421 All-in-One Absorbent Station (Oil Only) 308L

AS9422 All-in-One Absorbent Station (Chemical) 308L

code description

AS9430 Wall Mounted 500mm Roll Dispenser Only

AS9431 Wall Mounted 1000mm Roll Dispenser Only


AS9450 Twin Station (Maintenance)

208L

AS9451 Twin Station (Oil Only)

208L

AS9452 Twin Station (Chemical)

208L

code description

AS9440 Floor Standing 500mm Roll Dispenser Only

AS9441 Floor Standing 1000mm Roll Dispenser Only

Absorbent Dispenser Stands & Stations

All-in-One Absorbent Station

Don’t let your maintenance department and engineers 'rob' the site spill kits to deal with minor leaks and spills!!! Use a Day-to-Day Absorbent Station…

It is absolutely essential that spill kits on site are kept full, in case of a large spill occurring. Very often absorbents are ‘robbed’ from spill kits to deal with minor leaks and spills on a day-to-day basis. This could put the company at serious risk if a major spill occurred, as the spill kit would be depleted and unfit for purpose– Centralise absorbents to a single location in the workplace– Can be installed near your work station– Ensure that absorbents are readily available and accessible– Helps to encourage improved housekeeping measures– Strong and robust to stand up to continuous daily use

features: – 1 x Painted Steel Absorbent Stand– 1 x 500mm Absorbent Roll– 1 x Box of Hvy Weight Pads– 1 x Box of 1.2m Absorbent Socks– Available with Maintenance, Oil Only and Chemical Absorbents

Twin Absorbent Station

features: – 1 x Floor Standing 500mm Roll

Dispenser– 1 x 500mm Absorbent Roll– 1 x Box of 1.2m Absorbent Socks– Available with Maintenance, Oil Only

and Chemical Absorbents

Floor Standing Roll Dispenser

features: – Floor standing 500mm or 1000mm

roll dispenser– Easy to move around– Strong welded, steel construction

Wall Mounted Roll Dispenser

features: – Heavy duty painted steel– Quick and easy to change roll– Absorbents always ready to use


AS9402 Rapid Response Spill Trolley (Maintenance) 210L

AS9403 Rapid Response Spill Trolley (Oil Only) 210L

AS9404 Rapid Response Spill Trolley (Chemical) 210L

Rapid Response Spill TrolleyThe engineering and maintenance manager’s dream…! Fast and effective – wherever you are, the Rapid Response Trolley can go with you! Always at hand and ready for action!!

features: – Ideal for rapid deployment when a spill kit is not at hand and an effective, quick fix is needed– Includes everything you might need to clean up minor leaks and spills while working

on a job– Made of strong tubular steel– Complete with Hanzl® Ultra Hand Scrubber Towels – no need to waste time, clean up on

the job– Includes hazardous waste bag and holder – save time and collect used absorbents

straight away– Total absorbent capacity of trolley: 210L

RAPID RESPONSE SPILL TROLLEY

code description size (w x l x h) mm capacity

PB7681 Mobile Spill Cart 710 x 1360 x 960 60L

Mobile Spill Cart – For Absorbent Granules/SaltA simple, effective and quick solution for cleaning up spills anywhere in the workplace or clearing ice and snow

features: – Strong and durable polyethylene construction– With a waste-bag holder at the back– Brush and shovel included

FOR DRUM

HANDLING

EQUIPMENT

SEE PAGES 95,

96, 101 &102

14 15

Spill Control

Spill Control


Drain Protection Introduction

Loose/Granular A

bsorbents

Loose/Granular Absorbents

UniSorb™ Loose/Granular Absorbents

The traditional use of granules is still appropriate in certain applications where inaccessibility makes secondary absorbents (Pads, socks, cushions) difficult to use

Granules are often favoured for use when a spill has occurred on rough ground outdoors. Compatible to use with typical workshop liquids such as oils, coolants, solvents, acid, caustics and flammables

UniSorb™ Super

features: – Universal liquid absorbent powder which absorbs liquid

spills instantly– By weight this product absorbs up to 15 times more than

clay granules. 7L container (approx 1.6kg) will absorb as much as a 25kg sack of standard clay absorbent granules

– Effective for oil, paint, food, solvents, alcohol, blood, water and other liquids

– Ensures floors are left clean and dry with no film or marks. Non-abrasive

– Reduces cleaning time and costs in labour, materials and disposal costs

– 7L container with handle for easy carrying and dispensing– Warning – Do not use to absorb hydrofluoric acid

Premium UniSorb™ Clay

features: – High performance granules for exceptional liquid absorption– Fast acting on all liquids, including aggressive acids and alkalis– Non-mudding and remains granular even when saturated– Packed in strong 20L bags

code description size absorb cap

GS8105 UniSorb™ Super Absorbent Powder 1.6kg /7L 4L

code description size pack qty absorb cap

GS8103 Premium UniSorb™ Clay Granules

12kg /20L 70 bags 9L/Bag

Drain Protection Introduction

Case Study – Pollution of Waterways

In January 2009, a large water treatment company was fined £125,000 for causing pollution to a popular fishing river. This was caused by the release of chlorine from a sewage works into the river and resulted in wiping out decades of careful restoration in one day. The chlorine spread 3 miles downstream and it took three days to clear two tonnes of dead fish from the river. This fine was criticised by the Environment Agency as ‘not sufficient’ and shows how seriously the pollution of waterways is taken

The company was also ordered to pay £21,335 towards the clean-up and investigation. Their ongoing restoration costs are estimated to be £500,000 over the following 5 years

In 2008, the Environment Agency prosecuted 176 companies and 209 individuals, who were fined a total of £2 million. If a case goes to Crown Court, the fines are unlimited and can include a prison sentence

Protect your environment…

– How important is a good market-place reputation to your company?– Can you afford for your corporate image to be damaged by embarrassing fines and press headlines?– Are you taking your environmental responsibilities seriously?

Are your drains protected?

– Help to protect the environment, wildlife and the world we live in

– Help to protect your company from possible prosecution and large fines

– Large fines and bad media coverage could have long-lasting, damaging consequences to the image and brand of your company

– Shows that your company is concerned about the protection of the environment and is taking up its duty of care responsibilities

– Helps your company to gain accreditation if they are working towards ISO 14001 standards

– A cost effective solution – especially when compared to the possible consequences of not having these products available on site

– Drain protection is like having a fire extinguisher. If you have drains in the yard, there is a possibly that a spill will occur and one day you could be glad that you invested in drain protection products

7 Good reasons why Drain Protection is so important:

Can you afford not to take the correct and adequate preventative measures? Don't put money down the drain...!

UniSorb™ Natural

features: – Fire retardant wood-fibre granules– Lightweight – makes carrying granules a lot easier and allows

you to carry twice as much at once, to the area of the spill– Excellent Performance – UniSorb™ Natural absorbs up to 16L

per bag. Kilo for kilo that is three times more than clay!– Save labour and disposal costs – as this product is more

absorbent, less granules have to be cleaned up and disposed of

code description size pack qty absorb cap

GS8104 UniSorb™ Natural Granules

8kg /30L 70 bags 16L/Bag

16 17

Spill Control

Spill Control


Drain Protection Products

Drain Covers

Polyurethane Drain CoversKeep harmful and unwanted liquids out of your drains and away from waterways

features: – Made from 2-layers of thick polyurethane– Bottom layer made of soft and flexible urethane, which

moulds easily to uneven surfaces and creates a secure and tight drain seal

– Super strong top laminated layer, strengthens the drain cover and helps to prevent it stretching and ripping

– Resists oils, fuels, solvents and many chemicals– Very durable and designed for continual outdoor use– Re-usable, simple and easy to wipe clean– Yellow in colour, makes it clearly identifiable. Makes other

workers aware that a spill has occurred– Drain opening must be overlapped by at least 6cm on all

sides – please check your drain size before ordering– Easy to roll up and store securely out of the way– Holdalls and wall bracket keep drain cover secure and at hand– Drain protection sign also available (Rigid Plastic)

Drain Covers

code description size (w x l x h) mm pack qty

DP9910 Heavyweight, Reusable Cover 460 x 460 x 15 1




DP9914 Yellow Holdall 150 Dia x 1070 1

DP9915 Yellow Holdall 150 Dia x 650 1

DP9916 Yellow Holdall Wall Bracket 550 x 120 1

AC9404 Drain Protection Sign 160 x 200 1

UniPlug™ Metal Storage Box

features: – Wall mountable with hinged lid– Holds up to 2 of the largest sized UniPlug™ clay drain covers– Easy to check contents– Very quick and easy to deploy

UniPlug™ Clay Drain Covers

features: – Made of a putty like layer of clay based composition– Useful and effective solution for where the ground around the

drains is rough or irregular (tarmac or concrete)– Resistant to oils, fuels, solvents and many chemicals– For emergency, once-only use to temporarily seal a drain– Very simple to apply – just peel off protective backing and

press firmly in and around the drain cover– As well as drains, these covers can be used for temporarily

sealing holes or rips in leaking drums or tankers


DP9920 UniPlug™ Clay Drain Cover 650 x 450 x 20 4




DP9925 Metal Wall Mounted Storage Box 760 x 75 x 560 1

Mechanical Drain CoverFor frequent use and routine operations (e.g tanker deliveries)

features: – Use in applications where drain protection is required for an

extended period of time– Simple single-hand lever operation locks the cover onto the drain– Very quick and easy to deploy in emergencies– Strong polycarbonate and steel construction with effective

neoprene seal– Wall mounted holder keeps the cover near the drain – where

it’s needed most

Drain Protection Products

code description size (w x l ) mm pack qty

DP9930 Yellow Mechanical Drain Cover 670 x 610 1



DP9933 Yellow Wall Mounted Holder n/a 1

Conical Drain Plugs

features: – A quick and effective solution that offers ultimate protection

in high risk drainage areas– Made of very flexible polyurethane– Durable and robust, with long operating life– Removable which allows your drain to function normally

when not in place– Can either be used permanently or as an emergency measure– Range of sizes available to suit different drains

code description size mm pack qty

DP9950 Yellow Drain Plug 120 x 50 Dia 1




code description size (w x l ) mm pack qty

DP9980 Yellow Barrel Patch 130 x 180 1

Barrel Patch

features: – Large polyurethane temporary repair patch– The soft polyurethane patch conforms to any shape and

tightly seals the leak– Resists oils, fuels, solvents and many other chemicals– Reusable – easy to clean– With heavy duty ratchet strap, allows you to tighten patch

onto barrel– Quick and effective solution in the event of an accident– Works with steel or plastic drums

Pre Mixed Plug & Seal Putty

features: – For emergency sealing of leaks from holes, tears and ruptures– Product comes pre-mixed and ready for immediate

application– Stop leaks at their source very quickly and effectively– Short term problem solver until contents of drum have been

removed– Stays in place for up to 24hrs– Available in 0.5kg and 1kg tubs

code description size pack qty

DP9960 Pre Mixed Plug & Seal Putty 0.5kg 1

DP9961 Pre Mixed Plug & Seal Putty 1kg 1

Disaster... Quick Fix...

18 19

Spill Control

Spill Control


Spill Response Training & Site Surveys

Spill Barrier & D

rain Dem

arcation Paint

Spill Barrier & Drain Demarcation Paint

Drain Demarcation Paint

features: – Highly durable, chlorinated rubber paint– Available in Red, Blue and Yellow (other colours are available)– Fast drying time and easy to apply– Can also be used for marking out walkways, roads and posts etc

The Environment Agency says: Drains should be identified clearly by colour coding all manhole covers, drainage grills and gullies. Foul water drains should be painted red and surface water drains blue

code description size pack qty

DP9941 Red Drain Paint 5L 1

DP9942 Blue Drain Paint 5L 1

DP9943 Yellow Drain Paint 5L 1

Spill Barrier

features: – Use spill barriers to prevent spills from reaching drains and

spreading throughout the workplace– Forms a tight seal to divert liquids away from drains,

equipment, stock, doorways and offices– Helps to minimise environmental impact– Very flexible non-absorbent polyurethane– Washable and re-usable– Resists water, oil and most chemicals– Bright yellow colour for high visibility– Join spill barriers together with corner and connection pieces– Confine leaks around machines to help with quick and easy

clean up

code description size (h x l ) mm pack qty

DP9901 Reusable Spill Barrier 60 x 3m 1

DP9903 Reusable Connection Joint 60 x 100 1

DP9904 Reusable Corner Piece 60 1

Multi-purpose safety yellow available

Spill Response Training

PPG21 (Pollution Prevention Guidelines) for ‘Pollution Incident Response Planning’ state that: The effectiveness of any site incident response plan will depend on staff training. Training should include:– Awareness of the sensitivity of the environment and the

potential harm to the environment from materials held on-site– Clean up, safe handling and legal disposal of contaminated

materials and waste resulting from an incident

Our Spill Response Training courses help companies to implement their Environmental Management System (EMS) or when working towards ISO14001 accreditation. The training meets the requirements outlined by the Environment Agency

Each spill training course is designed to give operators a fundamental awareness of:– Legislation– Protection of waterways– Health, Safety and Containment– The different types of absorbents– How each type is used– Emergency spill kits– Spill response procedures– Disposal of contaminated absorbents

Training sessions can be adapted to suit your specific requirements.Certificates and handouts are available upon the completion of each training session

Duration of each session: 1 hour (5 sessions per day)Course capacity: Up to 15 delegates per session

Spill Risk Site Surveys

Unisan offer expert consultancy and site surveys to help keep your workforce safe, productive and help you comply with ever-changing safety and environmental regulations

The full Spill Risk Site Survey is conducted by a member of our Technical Sales Team who will arrange a site visit to report and advise you on any latest regulations and outstanding issues you may have. Due to our expert knowledge and full understanding of the needs and requirements of your industry, we will be able to suggest applicable products, which will assist you in conforming to the latest requirements of ISO 14001

Spill Response Training & Site Surveys

Choosing your Spill Kit Correctly

Site Survey and Risk Assessment We would strongly recommend that you contact us to arrange a full Site Survey and Risk Assessment to ensure that all potential spill hazards are identified and that the correct type and number of spill kits are selected

Identify the Spill Kit Type neededIdentify the type of liquid you may require to clear up and choose a spill kit, with the appropriate absorbent type. We would recommend you choose a Maintenance or Chemical spill kit if you are unsure which type to choose or you are faced with the possibility of many different types of spill. These kits are the safest option to go for as they will absorb most types of spilt liquids

Is it fit for purpose?It is very important to ensure when purchasing your spill kit that it is fit for purpose and that it has enough absorbent capacity to cope with the largest possible spill in the area of the site it is covering. For example, in an IBC storage area you would need a 1100L spill kit, to be fully covered

Spill Kit Absorbent TypeWhat liquids are you most likely to have spillages from…?

Maintenance: Absorbs oils, fuels, water, coolants, solvents, mild acids and alkalisOil Only: Absorbs oils and fuels, NOT water or water-based liquids such as water-based coolants (hydrophobic)Chemical: Absorbs most acids, solvents, and caustics

Spill Kits for Every Situation and Need on Your Site

Are you prepared for spills on your site?

20 21

Spill Control

Spill Control


Portable, Rapid Response Spill Kits

Special Value Spill Kits

Special Value Spill Kits

Premium Shoulder Bag Spill Kit

Portable, Rapid Response Spill Kits

90 Litre Special Value Spill Kits – Wheeled Bin

features: – 1 Yellow 2-wheeled Bin– 4 Socks (80mm x 3m)– 60 Pads (Heavyweight)– 3 Waste Disposal bags– 1 Instruction & Contents Card

50 Litre Special Value Spill Kits – Shoulder Bag

features: – 1 Yellow Shoulder Bag– 2 Socks (80mm x 3m)– 25 Pads (Heavyweight)– 2 Waste Disposal Bags– 1 Instruction & Contents Card

20 Litre Spill Kits – Plastic Carry BagVery compact; ideal for areas where storage space is limited, such as vehicles or storage cabinets. For quick and easy deployment to a spill

features: – 1 Clear Plastic Carry Bag– 2 socks (80mm x 1.2m)– 10 Pads (Heavyweight)– 1 Waste Disposal Bags– 1 Instruction & Contents Card

40 Litre Spill Kits – Secure BinVery strong and sturdy bin with shut-lock lid and carry handle. Ideal for labs, on or under work benches, delivery vehicles, fuel dispensing areas or where space is limited

features: – 1 Black Bin with Shut-Lock Lid– 4 Socks (80mm x 1.2m)– 20 Pads (Heavyweight)– 1 Waste Disposal bags– 1 Instruction & Contents Card

code description type absorb cap

SK9505 Spill Kit – Clear Plastic Bag Maintenance 20L

SK9605 Spill Kit – Clear Plastic Bag Oil Only 20L

SK9705 Spill Kit – Clear Plastic Bag Chemical 20L


SK9506 Spill Kit – Black Secure Bin Maintenance 40L

SK9606 Spill Kit – Black Secure Bin Oil Only 40L

SK9706 Spill Kit – Black Secure Bin Chemical 40L


SK9501 Spill Kit – Shoulder Bag Maintenance 50L

SK9601 Spill Kit – Shoulder Bag Oil Only 50L

SK9701 Spill Kit – Shoulder Bag Chemical 50L

Special Value Spill Kits – Economy Range

These kits contain the essential elements that you need to contain and clear up in the event of a spill occurring


SK9502 Spill Kit – 2-Wheeled Bin Maintenance 90L

SK9602 Spill Kit – 2-Wheeled Bin Oil Only 90L

SK9702 Spill Kit – 2-Wheeled Bin Chemical 90L

210 Litre Special Value Spill Kits – Wheeled Bin

features: – 1 Yellow 2-wheeled Bin– 8 socks (80mm x 3m)– 150 Pads (Heavyweight)– 8 Waste Disposal Bags– 1 Instruction & Contents Card





50 Litre Premium Spill Kits – Shoulder BagStrong poly-vinyl carry bag with shoulder strap. Easy to carry and store. Zip-top makes it very quick to open and access absorbents. Ideal for workstations, lorry cabs, laboratories, delivery/loading bays, fuel dispensing areas

features: – 1 Yellow Shoulder Bag– 1 Drain Plug (650mm x 450mm)– 2 Socks (80mm x 3m)– 25 Pads (Heavyweight)– 1 Waste Disposal Bags– 1 Instruction & Contents Card


SK9507 Spill Kit – Shoulder Bag Maintenance 50L

SK9607 Spill Kit – Shoulder Bag Oil Only 50L

SK9707 Spill Kit – Shoulder Bag Chemical 50L

22 23

Spill Control

Spill Control


Premium

Range Spill Kits

Vehicle Spill Kits

Vehicle Spill Kits

50 Litre Vehicle Spill Kit

features: – 1 Plastic Storage Cabinet with Hinged Lid (300 x 435 x 660mm)– 1 Drain Plug (650mm x450mm)– 4 Socks (80mm x 1.2m)– 25 Pads (Heavyweight)– 2 Waste Disposal Bags– 1 Cushion (Large)– 1 Instruction & Contents Card

65 Litre Vehicle Spill Kit

features: – 1 Plastic Storage Cabinet with Hinged Lid

(580mm x 450mm x 400mm)– 1 Drain Plug (650mm x450mm)– 4 Socks (80mm x 1.2m)– 35 pads (Heavyweight)– 2 Cushions (Large)– 2 Waste Disposal Bags– 1 Instruction & Contents Card


SK9510 Vehicle Spill Kit Maintenance 50L

SK9511 Spill Kit Refill Maintenance 50L

SK9610 Vehicle Spill Kit Oil Only 50L

SK9611 Spill Kit Refill Oil Only 50L

SK9710 Vehicle Spill Kit Chemical 50L

SK9711 Spill Kit Refill Chemical 50L


SK9512 Vehicle Spill Kit Maintenance 65L


SK9612 Vehicle Spill Kit Oil Only 65L


SK9712 Vehicle Spill Kit Chemical 65L


Premium Wheeled Bin Spill Kits

– Great solution for when a super fast reaction is needed in the event of a large spill

– Super large bin capacities, including UniSorb™ Super– Durable polyethylene bin keeps absorbents clean and dry– Bins have large capacity allowing you to take more absorbents to

the spill at once– With hinged lids for quick and easy access– Ideal for large sites where potential spill risks could be some

distance apart– Use in workshops, warehouses, liquid storage areas, factory

production areas and loading bays

250 Litre Wheeled Spill Kit

features: – 1 Yellow 2-Wheeled Bin– 1 Drain Plug (650mm x 450mm)– 6 Socks (80mm x 3m)– 140 Pads (Heavyweight)– 1 UniSorb™ Super 7L

– 5 Cushions (Large)– 1 Free-Standing Spill Sign– 1 Plug and Seal Putty (0.5kg)– 5 Waste Disposal Bags– 1 Caution Tape Roll– 1 Instruction & Contents Card


features: – 1 Yellow 2-Wheeled Bin– 1 Drain Plug (650mm x 450mm)– 10 Socks (80mm x 3m)– 170 Pads (Heavyweight)– 1 UniSorb™ Super 7L

– 10 Cushions (Large)– 1 Free-Standing Spill Sign– 1 Plug and Seal Putty (0.5kg)– 6 Waste Disposal Bags– 1 Caution Tape Roll– 1 Instruction & Contents Card


features: – 1 Yellow 2-Wheeled Bin– 5 Socks (80mm x 3m)– 50 Pads (Heavyweight)– 2 Cushions (Large)– 1 UniSorb™ Super 7L

– 1 Free-Standing Spill Sign– 1 Plug and Seal Putty (0.5kg)– 3 Waste Disposal Bags– 1 Caution Tape Roll– 1 Instruction & Contents Card






















Premium Range Spill Kits

Helps your vehicle drivers to be prepared if a spill occurs when delivering or transporting liquids, or when re-fuelling etc. Helps you to comply with ADR regulations. Ideal for fixing to lorry cabs and trailers, delivery and maintenance vans, plant machinery. Strong and durable storage cabinets resist chemicals and keep absorbents dry and safe

UniSorb™ Super

features: – Universal liquid absorbent powder which absorbs liquid spills instantly– By weight this product absorbs up to 15 times as much as clay

granules. 7L container (approx 1.6kg) will absorb more than a 25kg sack of standard clay absorbent granules

– Effective for oil, paint, food, solvents, alcohol, blood, water and many other liquids

– Ensures floors are left clean and dry with no film or marks. Non-abrasive– Reduces cleaning time and costs in labour, materials and disposal costs– 7L container with handle for easy carrying and dispensing– Warning – Do not use to absorb hydrofluoric acid

FREE IN EVERY PREMIUM SPILL KIT!!!!SEE PAGE 16

FOR MORE

ABOUT

UNISORB™

24 25

Spill Control

Spill Control

Spill Caution Tape

features: – Helps to warn others on site that a spill

has occurred and keep the area clear until it has been cleaned up

– Bright yellow with large, clear writing makes this tape very easy-to-read


Spill Kit Accessories

Premium

Range Spill Kits

Premium Spill Kits

Is your current spill kit fit for purpose? If you have an IBC stored on site, you need an 1100L spill kit

1100 Litre IBC Wheeled Spill Kit

features: – 1 Yellow 4-Wheeled Bin (optional drop front)– 2 Drain Plugs (650mm x 450mm)– 30 Socks (80mm x 3m)– 300 Pads (Heavyweight)– 20 Cushions (Large)– 2 Rolls (500mm x 44m)– 1 Roll (1000mm x 44m)– 1 UniSorb™ Super 7L– 1 Free Standing Spill Sign– 1 Plug and Seal putty (1kg)– 12 Waste Disposal Bags– 1 Caution Tape Roll– 1 Non-spark safety shovel– 1 Instruction & Contents Card

Drop Front Version for easy accessA simple extra that makes all the difference and your life a lot easier. Instead of trying to reach to the bottom of a large bin to get to the last pad – just drop the front!

Non-spark Safety Shovel

features: – When clearing up a fuel or chemical

spill, the only safe option is to use a plastic shovel. This helps to eliminate the chances of sparks flying off the shovel as it makes contact with the floor

– Single-piece moulding made from polypropylene

– Strong and durable shovel

Free Standing Warning Spill Sign

features: – Don't risk large compensation claims!– High visibility folding safety warning sign – Help prevent slips and falls– Lightweight, highly durable and easy

to carry

Spill Kit Security Tags

features: – It is essential that your spills kits are kept

full with the correct amount of absorbents, at all times. If the contents are used to deal with minor leaks and spills, it will leave the spill kit depleted

– A depleted spill kit will result in it being unfit for purpose and could put you at massive risk if a large spill occurred.

– Make the auditing and sealing of your spill kits easy with our tamperproof tags

– Tags clearly show if spill kits have been opened or tampered with


features: – 1 Yellow 4-Wheeled Bin– 1 Drain Plug (650mm x 450mm)– 25 Socks (80mm x 3m)– 250 Pads (Heavyweight)– 10 Cushions (Large)– 2 Rolls (500mm x 44m)– 1 UniSorb™ Super 7L– 1 Free Standing Spill Sign– 1 Plug and Seal putty (1kg)– 10 Waste Disposal Bags– 1 Caution Tape Roll– 1 Non-spark safety shovel– 1 Instruction & Contents Card








code description size (w x h) mm

AC9401 Maintenance Spill Kit Sign 160 x 200

AC9402 Oil Only Spill Kit Sign 160 x 200

AC9403 Chemical Spill Kit Sign 160 x 200

code size (w x h) mm

AC9412 280 x 1100

code size (w x l) mm

AC9411 75 x 50m

code size mm Pack qty

AC9409 500 x 900 50

AC9410 500 x 900 100

code size (w x h) mm

AC9405 305 x 630

code description Pack qty

AC9413 Spill Kit Security Tags 100

code description size

WP3561 Light Cotton Wipes 10kg

WP3562 Premium White Cotton Wipes

10kg



SK9531 Spill Kit– 4-Wheeled Bin (Drop Front)

Maintenance 1100L




Oil Only 1100L




Chemical 1100L


Spill Kit AccessoriesPremium Range Spill Kits

10kg Polywrapped Wipes

features: – 10kg bags of cleaned and compression

packed wipes– Suitable for most industrial applications

Emergency Spill Kit Station Signs

features: – Printed on high visibility yellow, rigid plastic – easy to identify

and locate specific location points

Hazardous Waste Disposal Bags

features: – Dispose of your contaminated waste

correctly and safely – Strong, heavy-duty polypropylene bags– With clean pre-printed writing, so

that bags can clearly be identified as hazardous waste

FOR METAL

BINS SEE

PAGE 126

26 27

Spill Control

Grit Bins, Rock Salt & Spreaders

Heavy Duty 270L Towable Salt Spreader

– Super strong and robust salt spreader with steel hopper– Fitted with stainless steel spreading disc– Regulating rod to ensure an even, consistent spread (up to 12m)– Suitable for forklifts or normal vehicle towing hitches– Hopper cover is also available

White De-Icing Rock Salt

features: – Top quality white rock salt, which

doesn't clog and spreads evenly– Clears ice and snow fast– Leaves virtually no residue or brown mess– Packed in strong tear resistant 25kg bags– Rock Salt Winter Kit c/w 200L Bin, Red

shovel and 8 x 25kg Bags

Top Opening Grit Bin

features: – For outdoor storage of grit and salt– Easy to move with forklift access points– Strong and robust design – resistant to

cold weather

Push Along Salt Spreader

features: – Helps ensure a safe, even spread and

reduce labour time– Sturdy build with 20cm pneumatic tyres – Reinforced gear box and rod control for

grit release shutter

code description pack qty

GS8120 White Rock Salt 1 Bag

GS8120 White Rock Salt 40 Bags

GB8101 Rock Salt Winter Kit 1

code size (w x d x h) mm capacity

GS8104 850 x 500 x 750 130L

GS8105 1005 x 590 x 855 200L

GS8106 1200 x 600 x 790 400L

code size (wxlxh) mm capacity

GS5005 520 x 690 x 960 25kg

code size (wxlxh) mm capacity

GS5000 1050 x 1500 x 1440 335kg / 270L

Grit your teeth and order now – don't be caught cold!

Don't slip up this winter... help avoid litigation and compensation claims!!!

Did you realise…?– On average there are 11,000 ‘slip and trip’ accidents in the UK per year, costing employers an estimated £512 million!!!– 80% of slip and trip accidents are caused by ice– Most of the UK has over 100 nights of ground frost per year– There are about 13,000 lawyers in the UK who are keen to help persons sue for slippages– It is a lot cheaper to have ice control equipment in place than to be sued because you didn’t!!!

Does this look familiar…?!

Problem

Solution

Are you ready for the next snowfall…?!

Grit Bins, Rock Salt &

Spreaders

T 0845 0700 624 F 0845 0700 623 E [email protected] W www.unisanuk.com

SpillContainment & Storage

Spill Containment & Storage 30Bunded Drum Storage Workfloors 31Poly Drum Spill Pallets 32Drum Bunding 33Portable Spill Pallets 34Poly Containment Products 35General Drip Trays 37Drum Bund Trolleys 38Overpack Drums & Funnels 39Steel Drum Containment Products 40IBC Spill Pallets 42IBC Containment Products 43Steel Storage Cabinets for IBC's 44Steel Storage Cabinets for Drums 45Bund & Tank Lining Systems 46Hazardous Storage Cabinets 47Diesel Fuel Transport & Storage 49 Tank Solutions Pumps & Accessories 55Oil Storage Banks 56Plastic Fuel Storage Tank Solutions 57Commercial Rainwater Storage 58Poly Power Washers 59Fluid Transfer Management System 60Drum Taps & Vents 62Drum Pumps 63Electric Pumps, Drums & Accessories 64Storage Boxes 65Storage Bins & Tool Boxes 66Pallet Storage Boxes 67Storage Containers 68

Spill Containment &

Storage

P.32Drum Spill Pallets

P.49

P.63Drum Pumps

Fuel Transport and Storage Tank Solutions

28 29

Spill Containment &

Storage

Spill Containment &

Storage

Spill Containment &

Storage


Spill Containment & Storage Introduction Bunded Drum Storage Workfloors

Containment and Storage Solutions

Benefits to you…– Improves your working environment and helps to

keep your workplace clean, tidy and efficient– Fulfil your environmental responsibility and comply

with Pollution Prevention Guidelines– Safe storage of drums and IBCs– Protect the environment

A spill on site could lead to huge costs for your company, if the correct measures are not taken

Can you afford for your corporate image to be damaged by embarrassing fines and press headlines if a spill caused environmental damage?

Is your site fully covered and protected from the risk of spills?

Poor storage of oils, chemicals and other materials represents a major risk to the environment

A wide variety of potentially polluting liquids are routinely distributed, stored or collected in 210L drums and 1,000L IBC'sAccidental leakage or spillages can lead to the pollution of the ground (soil) and the waterways (streams, rivers, lakes, canals, docks etc). In most cases, such incidents can be prevented if appropriate measures are taken at an early stage

More and more companies throughout the UK are increasingly concerned with minimising their impact on the environment and demonstrating legal and regulatory compliance

Pollution Facts from The Environment Agency– Oil is a particularly harmful pollutant. A small amount of oil

causes a large problem. 5L of oil can cover an area of water the size of two football pitches

– Just 1L of solvent is enough to contaminate 100,000,000L of drinking water

Important Regulations & Pollution Prevention Guidelines‘The Control of Pollution (Oil Storage) Regulations 2001’ and ‘The Water Environment (Oil Storage) Regulations 2006’, require that secondary containment, such as a bund or drip tray must be provided to catch any leaks and spillages from drums, IBCs and storage tanks. These apply to all premises storing more than 200L on site

As set out by the Environment Agency for England and Wales, the Pollution Prevention Guidelines (PPG 26) for storing and handling of drums and IBCs, defines the requirements that secondary containment must achieve:

The secondary containment must be sufficient to contain at least 110% of the maximum contents of an oil tank, mobile bowser, IBC or drum greater than 200L. Drip trays must be able to hold at least 25% of the drum volume

Where more than one container is stored, the secondary containment should have the capacity of storing 110% of the largest container or 25% of the total volume of the containers being stored, whichever is greater

The Environment Agency is responsible for enforcing these regulations. Refer to the PPG regulations for full details

Bunded Poly Workfloors

features:– Moulded polyethylene workfloors for internal storage of 210L drums– Ideal for use as a static spill containment area or as an internal liquid dispensing area– Use as a quarantine area for leaking containers or a machine part cleaning area– Units can be joined together using joining strips and connectors to provide

workfloors as large as required– Strong and durable platform, which is removable for easy cleaning– Slip resistant surface on ramp and platforms for safe use– Heavy duty access ramp locks onto workfloor with integrated locating pins and user

friendly gradient for easy loading

Simple and easy to connect and join together to create a large workfloor

code description size (w x d x h) mm capacity

PB7630 2 x 205L Drum Workfloor 1600 x 800 x 150 120L

PB7631 4 x 205L Drum Workfloor 1600 x 1600 x 150 240L

PB7632 4 x 205L Drum (In-Line) Workfloor 2490 x 860 x 150 300L

PB7633 Ramp for Poly Workfloor 810 x 1290 x 180 n/a

PB7634 Workfloor Connector Strip Long 1557 (Length) n/a

PB7635 Workfloor Connector Strip Short 757 (Length) n/a

PB7636 Workfloor Connector Cross Piece 80mm Dia n/a

Bunded Drum

Storage Workfloors

Spill Containment &

Storage Introduction

Protect our Environment

Is this your current method of drum storage...?

PB76324-Drum In-Line

PB76302-Drum

FOR IBC SPILL

PALLETS SEE

PAGE 42

PB76314-Drum

PB7633Ramp

30 31

Spill Containment &

Storage

Spill Containment &

Storage


All Weather Cover

features:– Keep your drums dry and protected outdoors– Helps prevent bunds from filling with water– Strong steel frame and waterproof polythene cover– Quick and simple to erect– Easy to keep clean

210L Drum Spill Pallets

features:– Approved for storage of 210L drums to help your company comply with current storage regulations– Help to improve your housekeeping on site– Wide range available; spill pallets for 1 to 8 drum capacity– Very tough and durable products made of polyethylene– Corrosion free, suitable for use with most liquids– Compatible with most forklifts and pallet trucks; easy to move around site– Removable grating for easy cleaning and inspection of sumps

Bunded Hardcover Drum Storage Unit

features:– Rigid, double walled, chemical resistant and weather-tight

polyethylene hardcover– Ideal for outdoor storage of 210L chemical and oil drums– Tall headspace easily accommodates rotary pump equipment

and conical funnels– Roll-top door design allows for use in limited space or next to

buildings where swing doors would be a problem– Can be padlocked shut to secure goods – Forkliftable from both sides, whilst empty– Large internal record/data storage pockets– 2-drum and 4-drum options


PB7626 4 x 210L Drum Spill Pallet c/w All Weather Cover & Frame

1415 x 1310 x 2070 410L


PB7660 2 Drum Hardcover Unit 1565 x 995 x 2110 250L

PB7661 4 Drum Hardcover Unit 1565 x 1620 x 2110 250L


PB7620 1 x 210L Drum Spill Pallet 900 x 700 x 525 225L





FOR STEEL BUNDED SPILL PALLETS, PLEASE SEE PAGE 40

Poly Drum Spill Pallets Drum Bunding

Drum Dispensing Bund and Stacking Rack

features:– Ideal for easy and safe storage of 210L drums– Maximise floor space by stacking 4 steel drums horizontally– Dispense from all four drums at any time – simple and

convenient– Any leak or drips will be fully contained in the large integral sump– Made from strong and durable polyethylene– Easy to position with forklift truck


PB7650 Poly Dispensing Bund 1375 x 1350 x 635 450L

PB7651 Poly Cradle Stacker 1375 x 940 x 390 n/a

Spill Prevention Pallet Convertor

features:– Quickly transforms a standard wooden pallet into a safely bunded pallet– Simply place the pallet convertor over an existing pallet and it is ready to use– With a unique, compressible front which allows drums on a pallet to be lowered

in by a forklift– Lightweight and easy to clean and handle. Resistant to most chemicals– Made from strong and durable polyethylene– 2 and 4 drum versions available


PB7640 2 x 210L Drum Pallet Convertor 1500 x 1100 x 440 270L

PB7641 4 x 210L Drum Pallet Convertor 1500 x 1300 x 440 330L

Simple & Safe – Three Stage Operation

1.

2.

3.

Drum

Bunding

Poly Drum

Spill Pallets

FOR DRUM

FUNNEL

SEE PAGE 39

32 33

Spill Containment &

Storage

Spill Containment &

Storage

Spill Containment &

Storage


Portable Snap-up Spill Pallet

features:– Lightweight, portable spill pallet to help prevent spills in

temporary or remote locations– Unique snap-up support stays, create a sturdy sidewall

when opened– Made of yellow vinyl-coated polyester – high durability

and visibility– Resistant to fuels, chemicals and corrosive liquids– Folds up for compact storage and easy transport– Snap-up foam version also available. Snap-up, end sidewalls

made of foam, allow for continual drive-in and drive-out of vehicles quickly and easily. Ideal for maintenance of vehicles, machinery and tankers. POA

Canister Dispensing Stand and Drip Tray

features:– Use to safely dispense from small canisters of up to 30L– Helps to eliminate the risk of a spill– Canister is securely mounted in the stainless steel cage– Simple to operate – suitable for use with acids and lyes– Drip tray is also ideal for the storage of small drums,

cans and bottles– Tray base is made of durable polyethylene and is

complete with steel grating

Pallet Racking Bund

features:– Turn standard pallet racking into bunded racking– A simple solution – very easy to install and keep clean– Use with your existing racking. Bund sits across the beams

and the pallet sits inside the bund– Ideal for selective isolation – allows the segregation of

water pollutants and hazardous materials– Made of durable and robust polyethylene.


PB7710 Portable Spill Pallet (Chemicals) 1220 x 1220 x 200 302L



PB7715 Portable Spill Pallet (Fuels) 1830 x 1220 x 300 678L

PB7716 Portable Spill Pallet (Fuels) 1830 x 1830 x 300 1,018L




PB5050 Canister Dispensing Stand 290 x 310 x 480 n/a

PB7731 Poly Drip Tray c/w Steel Grating 600 x 980 x 85 30L


PB7671 Pallet Rack Bund 1310 x 1310 x 210 220L


PB7601 Laboratory Spill Tray 630 x 560 x 70 9.5L


PB7700 Portable Spill Decking – 2 Drum 1220 x 610 x 80 57L


PB7702 Portable Spill Decking – 4 Drum In-line

2400 x 610 x 80 114L



PB7709 Black Internal Grate – 2 Drum 580 x 1220 x 50 n/a


PB7735 Poly Sump Pallet c/w Steel Grating

1205 x 805 x 330 240L

PB7736 Canister Rack System – Single Shelf

1205 x 805 x 810 n/a

PB7737 Canister Rack System – Double Shelf

1205 x 805 x 1290 n/a

Portable Spill Pallets Poly Containment Products

Portable Spill Decking

features:– A very cost effective solution for temporary storage of

hazardous materials– Provides protection during temporary storage of drums,

machine parts, tanks and generators– Can also be used as a wash-down area or pumping station– All sizes have the 80mm folding, foam sidewalls that easily

spring back into place– Folds up for compact storage and easy transport– The 4-drum unit holds one IBC; the 8-drum unit holds two IBCs– Black internal grates are purchased separately – one grate for

every two drums

Bunded Canister Rack System

features:– Ideal for storage of 25L drums and small containers– Very versatile, lightweight and compact system– Racking fits onto polyethylene sump pallet with steel grating– Sump pallet can either be positioned directly on the floor or

on a Euro-pallet– Single or double shelf rack systems available

Laboratory Spill Tray

features:– Helps reduce the risk of spills from liquids and chemicals– Ideal for mixing small containers on lab workstations– Large surface area holds 4 x 5L bottles, with large sump

capacity of 9.5L– Made from durable polyethylene– Removable grate for easy cleaning– Use chemical absorbent underneath

3.

Poly Containment Products

Portable Spill Pallets

34 35

Spill Containment &

Storage

Spill Containment &

Storage



PB7690 Small Drum Spill Pallet 800 x 400 x 155 30L

PB7691 Small Drum Spill Pallet (without platform)

800 x 400 x 155 30L



800 x 600 x 155 40L



1000 x 600 x 175 60L


PB7675 Small Poly Cabinet c/w 2 shelves

545 x 440 x 990 30L

PB7676 Medium Poly Cabinet c/w 3 shelves

650 x 570 x 1650 70L

PB7677 Large Poly Cabinet for 1 x 205L Drum

720 x 920 x 1840 250L

PB7678 Large Poly Cabinet c/w 1 shelf 720 x 920 x 1840 250L


Small Drum Spill Pallets

features: – Ideal solution for storing smaller drums and containers (25L

drums), especially where space is limited– Can be used as a work area for safe liquid dispensing– Stackable for easy transportation and storage– Lightweight and easy to clean with non-slip platform surface– Can be used without platform as large volume, versatile drip trays– Made from strong and durable polyethylene

Poly Storage Cabinets

features: – Polyethylene cabinets, all with lockable doors and built-in sumps– Suitable for a wide variety of storage applications from aerosols,

5L to 210L drums and batteries– Low maintenance and easy to clean– Some cabinets come complete with storage shelves– Very strong and robust construction

WE RECOMMEND THE USE OF OUR ABSORBENT PADS AND CUSHIONS WITH THESE DRIP TRAYS. PLEASE SEE OUR MAINTENANCE AND OIL ONLY ABSORBENTS ON PAGES 5 – 11

General D

rip Trays


code description size mm capacity

DT7608 Poly Drain Bowl 440 Dia x 150 14L

Poly Drain Bowl

features:– For safe and easy draining of oil from vehicles and machinery– Complete with handles and pourer– Made from strong and durable polyethylene


DT7601 Pk of 5 Drip Trays 410 x 310 x 45 5L

DT7607 Pk of 5 Large Drip Trays (Pouring Lip) 530 x 400 x 95 16L

DT7609 Extra Long Drip Tray 1200 x 550 x 40 28L

DT7611 Large Octagonal Drip Tray 900 x 900 x 80 40L

General Drip Trays

features: – Help keep your housekeeping in order and reduce risks of slips and trips– Ideal for catching minor leaks and drips from drum taps, machinery, pipes etc– Compact to fit in small areas where space is limited– Lightweight and stackable – easy to transport and store– Made from strong and durable polyethylene

GENERAL DRIP TRAYS

Wheeled Spill Tray

features:– Unique design means it can be easily slid under plant machinery

and vehicles when being refuelled to contain any spillages– Any spillage during use, flows down the channels into the

catchment area in the hollow base– Very durable polyethylene, lightweight and easy to use


PB7730 Wheeled Spill Tray 915 x 660 x 240 50L

Pouring Lip

DT7607

DT7611

DT7609

DT7608

30L

40L

60L

30L

40L

60L

DT7601

36 37

Spill Containment &

StorageO

verpack Drum

s & Funnels

Spill Containment &

Storage


Overpack Salvage Drums

features:– Excellent solution for safely containing hazardous materials,

including acids, corrosives from damaged drums and parts– Twist lid to secure. Providing you with a leak-free container– Double walled lid and ribbed body design gives extra strength– Version available for damaged and distorted or bowed drums– Made of durable, UV-protected polyethylene– UN Approved for transportation

Drum Funnel

features:– Covers entire drum top and ensures safe pouring and draining– Helps keep drum top clean and reduce the risk of spillages– Made of durable polyethylene with high chemical resistance– Complete with lid to prevent dirt, dust and other foreign

objects entering the funnel and drum opening– Helps to reduce chances of dangerous slip and trip accidents


PB7646 Salvage Drum (210L Drum) 570 Dia. x 760 114L

PB7647 Salvage Drum (210L Drum) 800 Dia. x 1050 360L

PB7648 Salvage Drum (Damaged 210L Drum)

800 Dia. x 1140 398L

code description size mm

PB7625 Drum Funnel 640 Dia. x 150 (h)


PB7655 Oil Saver Drum Topper 610 Dia. x 510

Overpack Drums & Funnels


SB8250 Single Steel Bund (210L Drum) 750 x 750 x 1150 250L

Single Steel Bund – 210L Drums

features:– Unique way of ensuring your 210L drums comply with drum

storage regulations– Innovative design provides easy handling in a secure and

lockable bund– Handle with a forklift, pallet truck or a crane– Heavy duty steel construction

Oil Saver Drum Topper

features:– Pays for itself with first drum of liquids dispensed! – Saves over 18L of liquid per drum that is lost during routine

dispensing – Equipped with a stainless steel mesh strainer to catch debris

and re-direct liquids to the drum – Easy to install and use. Works with all types of drum pumps– Made of durable polyethylene

Drum

Bund Trolleys

Bunded Single Drum Trolley

features:– Move drums with ease and without the risk of spills occurring– Ideal as a mobile dispensing unit and sump– Made of durable, double-walled polyethylene – With ribs in dispensing area to keep containers above minor spills– Easy to handle due to well balanced design, with barrel tightly

secured with a ratchet strap– Safety support lock for easy vertical loading and storage

Multi-purpose Sump Trolley

features:– Suitable for 2 x 210L drums– Made of durable polyethylene– With steering bar and castor wheels– Available with or without steel grating– Can be transported easily on a pallet after removing

wheels (same size as a Euro pallet)


PB7680 Bunded Single Drum Trolley 1740 x 815 x 680 250L


PB7683 Multi-purpose Sump Trolley c/w steel grating

1290 x 805 x 1040 224L

PB7684 Multi-purpose Sump Trolley without steel grating

1290 x 805 x 1040 250L


PB7685 Premium Mobile Bunded Spill Cart

1690 x 740 x 1120 216L

Drum Bund Trolleys


PB7682 Mobile Drum Dispensing Scooter

725 x 725 x 990 30L

Mobile Drum Dispensing Scooter

features:– Dispense from your drums safely whilst transporting them

around the factory or workshop– Contain incidental spills and drips that often occur during

vertical dispensing– Lightweight and easy to handle, with 4 castor wheels– Base part made of non-corrosive polyethylene

Premium Mobile Bunded Spill Cart

features:– Makes the moving of drums and cans, safe and hassle free– Helps to eliminate the risk of spills, with large sump– With easy-roll, wheels and ergonomic handle, for easy

manoeuvring– Includes tool storage tray to keep tools clean and near to hand – Removable grating for easy cleaning – Made of durable polyethylene

FOR IBC DRUM

FUNNEL

SEE PAGE 43

38 39

Spill Containment &

Storage

Spill Containment &

Storage


Steel Drum Containment Products

Stackable Galvanised Drum Spill Pallets

features: – Durable construction to withstand heavy usage– Safety guards fitted on 3 sides – Side guard options of either steel bars, sheet metal or mesh infill– Removable grate allows easy cleaning and inspection of sump– Stackable system enabling storage of large quantities on a small

footprint area (max. 2 units high)– Can be forklifted from either side for ease of handling

Steel Drum Cabinets

features: – Durable construction to withstand heavy usage– Removable grate allows easy cleaning and inspection of sump– Fitted with vents to allow air circulation– Lockable, weatherproof cover operated by gas struts for easy

opening and closing – Can be forklifted from either side for ease of handling – Flammable version also available, with fully ventilated panels

on all sides, including doors

Stacking Drum Rack SystemFlexible, expandable storage system for 210L steel drums

Drum Rack Unit– Strong, welded steel construction– Racks are stackable (max. 3 units high)– Each rack holds 2 drums– With fork pockets for easy transportation of rack by forklift– Red epoxy paint finish

Sump Unit– Provides bunding for steel racks– Manufactured from steel sheets with fully welded seams– Grey epoxy paint finish

Drum Rotating Set – Optional Extra– A simple but very useful addition to the racking system– Fitted with 4 x 65mm dia. nylon rollers– 1 set of drum rotators per drum position– Zinc plated finish


SB8285 4 Drum Stacking Spill Pallet – Metal Bar Sides

1350 x 1260 x 1460 450L

SB8287 4 Drum Stacking Spill Pallet – Metal Sheet Sides

1350 x 1260 x 1460 450L

SB8286 4 Drum Stacking Spill Pallet – Metal Mesh Sides

1350 x 1260 x 1460 450L


SB8288 4 Drum Cabinet 1350 x 1260 x 1540 450L

SB8289 4 Drum Cabinet (Flammables) 1350 x 1260 x 1540 450L


SB8213 Drum Rack Unit – for 2x210L Drums

1490 x 515 x 390 n/a

SB8214 Sump Unit for Drum Rack 1250 x 1000 x 300 250L

SB8215 Drum Rotating Set n/a n/a

Steel Drum

Containment Products

Steel Drum

Containment Products

Steel Drum Containment Products

Galvanised Drum Spill Pallets

features: – Durable construction to withstand heavy usage– Removable grate allows easy cleaning and inspection of sump– Can be forklifted from either side for ease of handling– Stackable design saves space when pallets not in use– Galvanised to help withstand rust and heavy handling– Option of 1, 2 or 4 drum spill pallets– Additional extra: 2 drum galvanised steel dispensing frame, to be

used with 4 drum spill pallet. Order separately to the spill pallet

Benchtop Small Container Sumps

features: – For storage and decanting of fuels and hazardous

materials from small containers– Ideal for workshops, garages and laboratories– Can also be used as a drip tray– Easy to clean and very durable– Galvanised steel

Steel Bunded Flooring

features: – For the storage of potential water pollutants and flammable

liquids where stringent regulations apply– Helps you meet requirements of environmental regulations

when storing containers, dispensing, refilling or transferring potential water pollutants

– A modular system that can be placed together, which allows you to have a flexible and specific system to suit your requirements

– Strong enough to accommodate forklift trucks and vehicles– All steel decking is painted and the ramps are galvanised– 55mm or 110mm flooring heights available

THE STEEL BUNDED FLOORING IS MANUFACTURED TO ORDER AND IS AVAILABLE IN MANY DIFFERENT MODULAR OPTIONS – PLEASE CONTACT US TO DISCUSS YOUR REQUIREMENTS OR TO REQUEST A PROPOSAL

FOR POLYETHYLENE BUNDED WORK FLOORS AND SPILL PALLETS, PLEASE SEE PAGE 31 – 32


SB8280 Single Drum Galvanised Spill Pallet

900 x 800 x 385 150L

SB8281 Double Drum Galvanised Spill Pallet

1300 x 800 x 385 240L

SB8282 Four Drum Galvanised Spill Pallet

1300 x 1300 x 385 400L

SB8283 Four Drum Galvanised Spill Pallet (In-line)

2550 x 800 x 385 480L

SB8284 Two Drum Galvanised Dispensing Frame

1300 x 750 x 600 n/a


SB8296 Small Container Sump 1000 x 400 x 65 24L




Drum Rotating Set

MADE TO

MEASURE

POLY BUND

– POA

40 41

Spill Containment &

Storage

Spill Containment &

Storage

Spill Containment &

Storage


IBC Containment Products


PB7614 Single IBC Pallet – All Weather Cover

1760 x 1350 x 2410 1100L

PB7615 Double IBC Pallet – All Weather Cover

2560 x 1350 x 2210 1140L

Covered Poly IBC Bunded Spill Pallets

features: – A cost effective outdoor storage shelter for your drums and IBCs– Protects the bund from filling with rainwater– Strong steel frame and polyethylene cover


SB8290 Single IBC Steel Spill Pallet 1340 x 1650 x 620 1100L

SB8291 Double IBC Steel Spill Pallet 2720 x 1650 x 350 1100L

SB8292 Single IBC Steel Spill Pallet – Dispensing Stand

1340 x 1650 x 1080 1100L

SB8293 Double IBC Steel Spill Pallet – Dispensing Stand

2720 x 1650 x 1080 1100L

SB8294 Single IBC Steel Spill Pallet – Disp. Stand/Splash Guard

1340 x 1650 x 1780 1100L

SB8295 Double IBC Steel Spill Pallet – Disp. Stand/Splash Guard

2720 x 1650 x 1780 1100L

Steel IBC Spill Pallets

features: – Durable construction to withstand heavy usage– Removable grate allows easy cleaning and inspection of sump– Can be forklifted for ease of handling, use fork extensions

when needed (See pg 100)– Dispenser captures any spillages and channels liquid back

into spill pallet– Optional splash guard helps protect surrounding work areas

IBC Containment Products

IBC Spill Pallets

IBC Spill Pallets

Poly IBC Bunded Spill Pallets

features: – If a spill occurs from an IBC there is a huge risk of contamination and damage to the environment,

resulting in massive clean-up costs and fines.– Due to the large volumes being stored it is very important that IBCs are adequately and safely bunded– Easy to keep clean, with removable grates– Made of durable polyethylene with high chemical resistance– With forklift points, to allow transportation around the workplace– Built-in and add-on dispensing area options to catch any drips or minor spills– Single or double IBC options available


PB7610 Single IBC Spill Pallet 1450 x 1450 x 1000 1100L

PB7611 Single IBC Spill Pallet with Built-in Dispensing Area 2000 x 1490 x 765 1100L

PB7612 Double IBC Spill Pallet 2450 x 1450 x 575 1100L

PB7613 Add on Dispenser for Double IBC Pallet 640 x 590 x 665 100L

PB7617 Add on Dispenser for Single IBC Pallet 640 x 590 x 1065 100L

Add-on dispensing area Built-in dispensing area


PB7616 IBC Funnel 640 Dia. x 150

IBC Funnel

features: – For safer and easier pouring into IBC's – helps to reduce the

risk of spillages– Made of durable polyethylene with high chemical resistance– Complete with lid, to prevent dirt, dust and other foreign

objects entering the funnel and the IBC opening

FOR DRUM

SPILL PALLETS

SEE PAGE 32

FOR DAY TO

DAY ABSORBENTS

FOR MINOR

SPILLS SEE

PAGES 6 & 14

42 43

Spill Containment &

Storage

Spill Containment &

Storage


Steel Storage Cabinets for Drums

Multiple Steel Storage Cabinets for Drums

features: – With same features and benefits as our Multiple IBC Steel Storage Cabinets – The standard paint colour finish for our Multiple Drum Steel Storage

Cabinets is Blue – other colours available upon request– Roller shutter door option available upon request

The Multiple Drum Steel Storage Cabinets listed below are some of our most popular sizes – other sizes and combinations are available upon request

Demountable Steel Storage Container with Bunded Floor

features: – Affordable, mobile and very versatile storage container– Fully bunded unit – ideal for the construction industry, local authorities,

plant hire, private sector etc. Ideal for use at remote work sites– Designed to help protect the environment by eliminating accidental spillages– Ideal for storing oils, fuels, paints and inks etc– Fully galvanised with double wing doors– Made from zinc coated steel sheeting– Only a socket set required to erect– No crane necessary for loading and offloading

AccessoriesAnti Theft Security Bar offers additional security

Shelving System for inside container– 3 storage shelves– Useful for storing small drums, bottles and cans etc– Very strong, made of galvanised steel– Adjustable height

code description No. of Levels

size (w x d x h) mm capacity

DS7801 8 x 205L Drum Cabinet – Sliding Doors

1 3000 x 1650 x 1690 880L

DS7802 8 x 205L Drum Cabinet – Hinged Doors

2 1500 x 1500 x 3100 420L


2 3000 x 1650 x 3100 880L


2 5900 x 1650 x 3100 1730L


2 8800 x 1650 x 3100 2500L


2 6400 x 3100 x 3100 3300L


DS7830 Bunded Steel Storage Container 2250 x 2200 x 2200 202L

DS7835 Bunded Steel Storage Container 3000 x 2200 x 2200 275L

DS7840 Shelving system including 3 shelves 2000 x 500 n/a

DS7841 Anti-theft Security bar for Double Door n/a n/a

Steel Storage Cabinets for Drum

s

Steel Storage Cabinets for IBC's


IS7820 Single IBC Steel Cabinet – Lid & 2 hinged doors

1350 x 1660 x 1900 1100L

IS7821 Single IBC Steel Cabinet – Dispenser & 2 hinged doors

1350 x 1660 x 2580 1100L

Single Steel Storage Cabinets for IBC's

features: – Durable construction to withstand heavy usage– Removable grill allows easy cleaning and inspection of sump– Fitted with vents to allow air circulation– Weatherproof cabinet to protect contents from contamination– Lockable cabinet for security, which can also be moved easily by forklift– Easy loading and unloading of IBCs

code description No. of Levels

size (w x d x h) mm capacity

IS7801 4 x IBC Cabinet – Sliding Doors 2 3000 x 1650 x 3350 1125L





Multiple Steel Storage Cabinets for IBC's

features: – Keeps all your chemicals and liquids in one central location for easy

stock-taking, security and housekeeping– Helps prevent environmental pollution by containing accidental spills

or any leaking containers– With removable galvanised grid flooring and shelving– With high and low level flame arrested vents– Fully welded, leak proof sump over the entire base area– Epoxy coated sump for corrosive resistance (acids and alkalis)– Constructed from profiled mild steel sheets– Sliding, hinged or roller shutter doors available– The standard paint colour finish for our Multiple Drum Steel Storage

Cabinets is Blue – other colours available upon request

Additional Extras Available – Temperature Control– Lighting– Extraction– Insulated sides– Lock options available

The Multiple IBC Steel Storage Cabinets listed below are some of our most popular sizes – other sizes and combinations are available upon request

ASSEMBLE

IN UNDER 30

MINUTES!!!

Steel Storage Cabinets for IBC's

44 45

Spill Containment &

Storage

Spill Containment &

Storage


Hazardous Storage Cabinets

code description size (w x d x h) mm doors shelves

HS7711 Hazardous Cabinet 350 x 300 x 700 1 1


HS7713 Stand for HS7712 460 x 460 n/a n/a


HS7715 Stand for HS7714, 16, 17 900 x 460 x 500 n/a n/a





HS7720 Hazardous Wall Cabinet 850 x 255 x 570 2 1


HS7730 Mobile Hazardous Cabinet

900 x 460 x 840 2 1

HS7731 Mobile Hazardous Cabinet

900 x 460 x 1040 2 1

code description size (w x d x h) mm

HS7701 Hazardous Floor Storage Chest 1170 x 460 x 610

HS7702 Hazardous Floor Storage Chest 610 x 340 x 510

Hazardous Storage CabinetsIt is vital that employers and employees comply with the control of hazardous substances in all working environments. Our range of cabinets are designed to help provide safe and secure storage of hazardous substances as demanded by COSHH regulations

features: – 2-Point locking handles are set into the cabinet door, to help ensure no ‘snags’ occur as people and equipment move past– Adjustable spill-retaining, galvanised shelves for superior spill management– Integral liquid-tight sump encourages the correct handling of spills through the use of absorbents– Bright yellow coating ensures the cabinets are clearly identifiable in the workplace– Stands raise cabinets by 500mm with adjustable feet for uneven surfaces– Wall cabinet version is also available

Hazardous Storage Floor Chests

features: – Floor cabinets have a welded integrated sump– With angled lid to discourage article placement– Hasp and staple lock included

Mobile Hazardous Storage Cabinet

features: – Easy to manoeuvre around the workplace– Ideal for individual workstations– Lockable castor wheels


Bund & Tank Lining System

s

Bund & Tank Lining Systems

GRP Bund Lining SystemBunds can soon lose their resistance to contain constant drips and spillages through chemical erosion, accidental wall damage and deficient floor joints etc. Poor or incorrect construction of the bund can also allow spillages to easily penetrate the secondary containment area which is most commonly the wall to floor joint. This has Health & Safety implications, and the potential to contaminate the surrounding area and damage the environment which both in turn will affect profits and reputation

Government legislation was implemented in 2005 for all bunds which contain oil storage vessels. Regulations state that the secondary containment area should be impervious to oil and water, should the contents of the primary vessels be breached

In our experience and with its proven track record, GRP (Glass Reinforced Plastic) is the most superior system for its effectiveness to contain liquids

Our system will reinstate the integrity of the bund; it will cope with normal structural movement, is impact resistant and will provide a seamless long lasting maintenance free finish. Our lining system will breach any holes or cracks within the bund that paint or coatings simply cannot do

Whilst our system is suitable for oils; it will also provide effective containment for the most aggressive chemicals

Tank Lining SystemExtensive savings can be made by refurbishment of your tanks; not only will the outlay be less but the life of the tanks will be significantly extended

Leaking and corroded tanks can cause damage to the environment and to the health and safety of personnel, and in turn will cause product loss and wastage which will affect company profitability. Our tank repair and refurbishment service offers on site solutions for leaking, corroded and damaged tanks. Our preferred form of preparation is grit blasting carried out by our trained staff to ensure that preparation is always to the required standard

We utilise a wide range of materials to suit your storage specifications including GRP, epoxies, urethanes and sheet plastics to name but a few

Our lining systems are completely seamless, tough and durable and will be designed to meet your containment needs, from specifications for the most aggressive chemicals through to potable liquids

We understand that down time costs money. We are always prepared to work with our customers to ensure that down time is kept to a minimum

Whatever your containment needs, we can provide a lining solution to meet your requirements

Please contact us, with your requirements, for a quote or to arrange a site visit

Before

Before BeforeAfter After

After

30 OR 90

MINUTES FIRE

RATED VERSIONS

ALSO AVAILABLE

– POA

46 47

Spill Containment &

Storage

Spill Containment &

Storage


code description size (w x d x h) mm pump capacity

FS6000 UniMaster™ Poly Diesel Tank 770 x 540 x 500 12v Pump 100L

FS6002 UniMaster™ Poly Diesel Tank 1000 x 750 x 605 Manual 200L


FS6005 UniMaster™ Poly Diesel Tank 1620 x 750 x 665 Manual 400L


UniMaster™ Poly Diesel TanksHelps increase productivity by reducing many 20L can refill trips, while keeping your diesel engines running on site!!!

features: – Robust polyethylene diesel tank– Hinged lockable cover designed to protect pump, filler nozzle and fittings– Lightweight and easy to manoeuvre by hand when empty– Quality 12v 40Lpm fuel pump fitted – c/w 4m hose, auto nozzle and 4m cable– Manual fuel pump option also available for 200L and 400L tank sizes– 200L and 400L models are UN approved for legal transport of fuel – Compact, simple and easy to use

Diesel Fuel Transport & Storage Tank Solutions

Diesel Fuel Transport and Storage Tank SolutionsPreserving the environment for the future is a priority for us Our wide range of high quality, environmental compliant fuel transport and storage tanks help your company to protect the environment and fully comply with the latest legislation, we have tank solutions for a wide range of industrial and agricultural applications

Helping to keep you safe and legal whilst transporting fuel.Bulk purchasing of fuel will save you time and money. Also keep on the move when fuel strikes are on!!!

Important Diesel Transport RegulationsPlease refer to the following regulations and guidelines for more information regarding Diesel Transport – The Carriage of Dangerous Goods and Use of Transportable

Pressure Equipment Regulations 2009 These regulations enforce the European-wide agreement on the carriage goods by road set out in the document known as the ADR regulations. This document is revised every 2 years and the current edition was issued in 2009. ADR regulations are highly prescriptive in all matters connected with diesel transport on the road

Important Diesel/Oil Storage RegulationsPlease refer to the following regulations and guidelines for more information regarding Diesel and Oil Storage – The Control of Pollution (Oil Storage) (England) Regulations 2001– The Water Environment (Oil Storage) (Scotland)

Regulations 2006– PPG2 – Pollution Prevention Guidelines – Above Ground Oil

Storage Tanks– The Pollution Prevention Guidelines are produced by

the Environment Agency for England and Wales. PPG2 emphasises the requirements of the regulations, but in addition, gives many helpful recommendations on good practice, so much so that PPG2 is often quoted as the standard that has to be met. PPG2 is the most relevant guideline but other relevant guidelines are:

– PPG1 – General Guide to the Prevention of Pollution– PPG 26 Storage and Handling of Drums and Intermediate

Bulk Containers

=

Diesel Fuel Transport &

Storage Tank Solutions




HS7740 Acid & Alkali Cabinet 900 x 460 x 700 2 1


HS7742 Stand for HS7740/41 900 x 460 n/a n/a


HS7744 Acid & Alkali Wall Cabinet

850 x 255 x 570 2 1

HS7750 Mobile Acid & Alkali Cabinet

900 x 460 840 2 1

HS7751 Mobile Acid & Alkali Cabinet

900 x 460 x 1040 2 1


HS7760 Flammables Cabinet – With Stand Built In

900 x 610 x 1200 2 2

HS7763 Flammables Floor Storage Chest

1170 x 460 x 610 n/a n/a

Acid and Alkali Substance Storage CabinetUse of caustic materials in the workplace can present many hazards, particularly if acids and alkalis are stored incorrectly or with other chemicals. Our range of acid and alkali substance storage cabinets enable safe and identifiable storage in the workplace

features: – Same features and benefits apply as the hazardous

substance storage cabinets, shown on page 47– Stands and other size cabinets available upon request

Petroleum and Flammable Liquids Storage Cabinets and Floor Chests

features: – If stored incorrectly, petroleum and flammable liquids can

leak or spill causing damage and pollution.– These cupboards promote safe storage, handling and disposal

practices– Powder coated red – clearly identifiable– Same features and benefits apply as the hazardous substance

storage cabinets, shown on page 47

Wall Cabinet

48 49

Spill Containment &

Storage

Spill Containment &

Storage



FS6020 Bunded IBC – Skid Mounted 1525 x 1080 x 1225 950L

FS6021 Bunded IBC c/w Manhole – Skid Mounted

1680 x 1100 x 1360 950L

FS6022 Bunded IBC c/w Manhole – Skid Mounted

1310 x 2400 x 1470 2000L

Bunded IBC – Skid MountedUse to transport fuel on the public highway according to the ADR regulations

features: – Simple and effective UN Approved 110% bunded tank– Cabinet easily accessed from ground level– Skid mounted – Ideal for transporting on a flat bed truck– Side access pump cabinet – easy access for operation– Forklift pockets – for easy handling


Access manholeMaintenance and inspection of inner tank (Optional extra)

Internal baffles for safe towing Prevent fuel surge during transport and handling

Full loading lift eyeEase of handling even to awkward locations

Lockable weatherproof cabinet Enclosing pump, connections, hoses – all drips contained

Bund dipstickChecking for liquid in bund

Feed and return hose letterbox Enables generator / heater to be run whilst cabinet is locked

Forklift pocketsEase of handling

Tie down pointsSecuring tank during transit

Sump plugDraining liquid from cabinet

Bund emptying pipeRemoval of liquid from bund

Padlock facilitySecurity of fuel and equipment






FS6010 Easi-Fuel™ Fuel Tank c/w Manual fuel pump kit 1160 x 815 x 900 390L

FS6011 Easi-Fuel™ Fuel Tank c/w 12V fuel pump kit 1160 x 815 x 900 390L

FS6015 Easi-Fuel™ Wheeled Fuel Tank 600 x 510 x 1000 105L


UN Approved Tanks – Stay legal whilst transporting fuel

LockableKey lock in lid for security of fuel

Poly inner tank Keeps fuel clean and reduces weight of tank

Integrated hand pump (option) Easy dispensing. Can be kept in place during transport

Fast fill pointFeed and return mounts

Weatherproof bund Inner tank fully enclosed in 110% weatherproof bund

Forklift pockets on all sides Ease of handling-wheeled version available

Hose letterboxesLid locked whilst supplying back-up fuel

Unique dimensions Pallet sized for ease of transportation

Easi-Fuel™ Diesel Fuel Tank

features: – Poly in steel UN 1202 Approved IBC for transporting fuel on the highway– Weatherproof 110% bund to ensure compliance with PPG2 Regulations– Pallet sized for optimum logistics and can be used in the back of most pickups– Capacity under 1,000L – no ADR Driver Training required– Manual or 12V fuel pump options, (both with 2m hose and trigger nozzle)

Easi-Fuel™ Wheeled Diesel Fuel Tank

features: – Easy to handle, wheelie-bin style design– Allows you to move your fuel supply easily around the site and take the

fuel to machinery/vehicles if needed– Ideal for access where space is limited – fits in lifts and through doorways– Manual fuel pump with 2m hose and trigger nozzle– c/w lockable lid and forklift pockets

FOR ALL FUEL PUMP OPTIONS – SEE PAGE 55

50 51

Spill Containment &

Storage

Spill Containment &

Storage


Diesel/Oil Storage Tanks

Benefits to you…– Bulk storage of waste or new oil – save collection/distribution costs– Independent fuel stations for your remote depots– Bulk purchasing of fuel will save you time and money– Keep on the move when fuel strikes are on– Increased operational efficiencies– 110% bund to comply with PPG2 Regulations for oil storage– Manufactured to BS 799 Part 5 Standard – Construction of Above Ground Oil Storage– Steel tank enclosed in steel, weatherproof outer bund – providing secure storage– Lifting eyes fitted for crane handling (empty only) and can be forklifted easily from either side

Oil Storage TanksAdditional benefits to those listed above are:

features:– In addition to the benefits listed above– Standard fitting includes tank contents gauge, 2” filler cap

and 2” vent cap– Fittings enclosed under lockable lid for additional security– With bottom outlet point – Larger size tanks also available (up to 60,000L)– For waste oil storage banks please see pages 56–57

Bulk Fuel Storage TanksAdditional benefits to those listed above are:

features:– Secure lockable bund compartment houses pump, nozzle,

hoses, feed and return connections– Feed and return hoses can be fed through letterbox enabling

generator to be run whilst compartment is locked – helps to prevent theft and vandalism

– Anti-siphon valve fitted to help prevent fuel theft and vandalism– Access manhole allows for maintenance and inspection of

inner tank– UN approved to be transported full of fuel (not part full)


FS6040 Oil Storage Tank 1800 x 750 x 1300 1,200L

FS6041 Oil Storage Tank 2300 x 1150 x 1300 2,200L


FS6050 Bulk Fuel Storage Tank 1200 x 1200 x 1490 975L

FS6051 Bulk Fuel Storage Tank 2120 x 1200 x 1490 2,160L

FS6052 Bulk Fuel Storage Tank 2400 x 1460 x 1490 3,000L

Bunded IBC Highway Tow

features: – 110% bunded, UN approved fuel tank– Pump cabinet easily accessed from ground level– Mounted on a ‘T’ bar style trailer for highway transportation– Hot dip galvanised chassis for protection against corrosion– Rubber torsion suspension for soft ride– Height adjustable jockey wheel and ball or eye coupling– Drum type auto-reverse braking c/w hand parking brake– Tank mechanically removable from trailer for multiple uses– Optional extra – Rear Safety Light Board (c/w light board,

cable and plug)


FS6030 Bunded IBC – Highway Tow

2895 x 1550 x 1700 950L

FS6039 Rear Safety Light Board Kit

1400 n/a

ALL HAND-OPERATED AND ELECTRIC PUMP OPTIONS FOR THESE FUEL TANKS ARE SHOWN ON PAGE 55



Diesel Fuel Transport & Storage Tank Solutions Diesel Fuel Transport & Storage Tank Solutions



Bunded IBC Manhole Highway TowAdditional benefits to those listed above are:

features: – With Access Manhole for easier cleaning/maintenance and

inspection of inner tank– Front chassis extension enables fitting of cabinets, large hose

reels, fire extinguishers etc– With rear support leg for greater stability when refuelling and

unit is uncoupled– Highway lighting, 7 pin plug and mudguards (EU specifications)– Lighting and number plate holder housed in protective channel

Smelly hands...? See page 155 for Power Wipes



2760 x 1550 x 1900 950L


1657 x 3520 x 1882 2000L

2" Mechanical Overfill Device – for hard fill

– Allows the filling of tank with confidence that it won’t over-spill


FS6045 Mechanical Overfill Device 2"

FOR BULK

WATER

STORAGE SEE

PAGE 58

52 53

Spill Containment &

Storage

Spill Containment &

Storage


Pumps & Accessories

Pumps and accessories for Diesel Fuel Transport and Storage Tanks

code description feed size power flow rate litres/min

FS5000 Semi rotary hand fuel pump c/w mounting plate, strainer, 2m suction hose, 4m dispensing hose and manual trigger nozzle

1" Hand 20 – 40

FS5005 Electric 12 volt self-priming pump, c/w mounting plate, nozzle holder, strainer, 2m suction hose, 4m dispensing hose and auto shut-off nozzle with holder

1" 12v 38

FS5010 Electric 240 volt self-priming pump, c/w mounting plate, nozzle holder, strainer, 2m suction hose, 4m dispensing hose and auto shut-off nozzle with holder

1" 240v 56

FS5015 Cube 56 240V fuel pump, c/w in-built nozzle holder and auto pump switch off, flow meter, 4m delivery hose and auto-shut off nozzle

1" 240v 56

FS5020 Cube 70 240V fuel pump, c/w digital flow meter and fuel management system, 4m delivery hose, 50 user codes auto pump switch and auto nozzle

1" 240v 70

FS5025 Mechanical, 4-digit flow meter c/w totaliser and reset dial 1" n/a 20 – 120

FS5026 10 micron filter and housing for the removal of water and particulate 1" n/a 70

FS5027 10 micron water and particulate filter refill cartridge for above 1" n/a 70

FS5030 Manual trigger nozzle, c/w swivel 1” BSP n/a 120

FS5031 Automatic shut-off nozzle c/w swivel 1” BSP n/a 60

FS5032 4m Delivery Hose with crimped male ends 1” BSP n/a n/a

Pumps &

Accessories




Deluxe Bulk Fuel Storage TanksIn addition to the standard Bulk Fuel Storage Tank benefits, the Deluxe Bulk Fuel Storage Tank range features:

– Large secure cabinet with full height access door– Lockable cabinet houses pump reels, hoses, connections with extra storage space for drums, cans and spill kits– Spill sump in base of cabinet to contain any spillage or drips – smaller equipment can be placed on this for refuelling– 3-way locking system with unique “anti-levering” design on cabinet door for extra security– Door stay, holds door wide open to give greater access and prevent door slamming– Bund sensor to detect fluid in the bund– Extra feed and return ports for running auxiliary equipment like generators and heaters etc– Offset fuel fill pipe for rapid refuelling of tank (9,000L and 18,000L options only) – Larger tank sizes available (up to 60,000L)

Specialised Storage Tanks

– Our range of steel tanks can be supplied as suitable for storage of other liquids other than diesel and with different pump requirements

– Epoxy lined tanks are suitable for storing corrosive liquids, i.e. anti-freeze, coolants and glycol, etc

– Can be fitted with a range of fuel temperature control devices– Contact our specialist division to discuss how we can help fulfil your needs

Hanzl® Ultra Hand Scrubber Wipes

Stay clean whilst refuelling with our high quality Hanzl Ultra Hand Scrubber Wipes

Fit inside the tank cabinet using our stainless steel wall bracket – see page 155 for more details


FS6060 Deluxe Bulk Fuel Storage Tank 2250 x 1200 x 1620 2,200L







54 55

Spill Containment &

Storage

Spill Containment &

Storage


Plastic Fuel Storage Tank Solutions

Poly Bunded Fuel Storage Tanks

– Fully enclosed bunded tank complete with built-in 240V pump, 4m delivery hose and auto shut-off nozzle

– Complete with digital flowmeter and 10 micron filter– Robust and durable design – high quality polyethylene– Tanks with 3500L capacity and greater, a remote contents gauge and

low level fill point cabinet are fitted as standard. Smaller capacity tanks are equipped with a clock gauge, and an optional gauge is available

– Below are listed the most common capacity stations – larger capacities are available upon request

Poly Bunded Oil Storage Tanks

– Fully bunded tanks suitable for industrial and domestic use. – Manufactured from durable and UV-resistant polyethylene– Optional bottom or top outlet including filter– Features a Watchman pro-active fuel monitoring system

Poly Bunded Waste Oil Storage Tanks

– Fully bunded tanks which provide safe storage of waste oil on site– Tanks are manufactured from durable polyethylene– Integrally bunded with 110% overspill capacity, with no outlets through bund– Helps to meet requirements set out by the Environment Agency


FS6080 Poly Bunded Fuel Tank (Slimline) 2700 x 900 x 1700 1,350L

FS6081 Poly Bunded Fuel Tank (Vertical) 1570 dia x 1800 1,400L

FS6082 Poly Bunded Fuel Tank (Horizontal) 2820 x 1500 x 1650 2,500L






FS6090 Poly Bunded Oil Storage Tank (Slimline)

900 x 2700 x 1700 1,350L

FS6091 Poly Bunded Oil Storage Tank (Vertical)

1570 dia x 1800 1,400L

FS6092 Poly Bunded Oil Storage Tank (Horizontal)

1500 x 2800 x 1600 2,500L


2000 dia x 2500 3,500L


2550 dia x 2450 6,000L


FS6097 Poly Bunded Waste Oil Tank 900 x 2700 x 1700 1,350L

FS6098 Poly Bunded Waste Oil Tank 1576 dia x 1800 1,400L

FS6099 Poly Bunded Waste Oil Tank 1500 x 2800 x 1600 2,500L

ADBLUE

STORAGE

TANKS ALSO

AVAILABLE –

PLEASE

CONTACT US

– POA

Plastic Fuel Storage Tank Solutions

Oil Storage Banks

Oil Storage Banks

Oil Dispensing BankIn addition to the standard Bulk Fuel Storage Tank benefits, this Oil Dispensing range features:

– Fitted with lifting eyes and forkliftable base for ease of handling and relocation of tank (empty only)

– Galvanised mesh floor above the drip collection sump, for easy and safe filling of smaller equipment

– Top mounted outlets to prevent seepage– Large, secure storage cabinet with full height access door– 3-way locking system with unique ‘anti levering’ design on

cabinet door for extra security– Door stay, holds door wide open to give greater access

and helps prevent door slamming– High quality lubricant pump options available

Low Level Waste Oil BankIn addition to the standard Bulk Fuel Storage Tanks features and benefits, this Waste Oil Bank range features:

– 110% bunded waste oil and hydro-carbon storage tank to comply with PPG2 Regulations

– Low level oil collection sump to provide a safer, more comfortable working height and help prevent backache

– Oil filters and other smaller equipment can be easily drained by placing on the mesh floor above the collection sump

– Waste oil is pumped from the sump into the inner tank

Pump options for transfer of waste oil from sump to tank– K2 semi rotary hand pump– Push-button transfer pump, with auto switch-off after

5 minute run time


FS6070 Oil Dispensing Bank 2250 x 1200 x 1620 2200L


FS6080 Waste Oil Bank 2250 x 1200 x 1620 2,200L



code description feed size

power flow rate

FS5040 Electric 240V viscomat oil pump c/w pressure switch, 4m hose & trigger nozzle

1/2" 240v 9L /min

FS5041 Electric 240V viscomat oil pump c/w pressure switch, 15m hose & trigger nozzle, auto rewind hose reel

1/2" 240v 9L /min

code description feed size

power flow rate

FS5045 K2 Semi Rotary Hand Pump for transfer of waste oil

1" Hand 20 – 40

FS5046 Push-button Electric Pump for transfer of waste oil

1" 240v 50

Pumps

Pumps

Clean oil… Waste oil…

FS5045

MANUAL WASTE PUMP OPTIONAUTOMATIC WASTE PUMP OPTION

FS5046

56 57

Spill Containment &

Storage

Spill Containment &

Storage


Poly Power Washers

Poly Power W

ashers

Comm

ercial Rainwater Storage

Poly Water Transport Tanks and Pressure WashersSaves you time as the tank removes the need to locate a water supply out on location – Fill your tank at base and take your water with you!

Poly Highway Tow Water Tank– Tamperproof, heavy duty lockable hatch protects contents– Access manhole and drain for easy cleaning and maintenance– Internal baffles, shaped ends and aerodynamic design for safe towing– Extended chassis – allows fitting of pumps, engines and other equipment– Durable and robust – galvanised chassis prevents rust and rubber strips prevent wear– Adjustable jockey wheel and option of either ball or eye coupling– Fitted with highway lighting, 7 pin plug and mudguards– Lighting and number plate housed in protective channel– Fitted with rubber suspension, auto reverse braking, hand parking brake and 13” wheels and tyres– Twin 28L chemical/anti-freeze tanks also available

Pressure Washers– To be fitted on extended chassis at the front of the Poly Highway Tow Water Tank– High performance pressure washers with 200 bar petrol or diesel engine options– Many uses including cleaning of plant machinery and equipment on site, street cleaning, graffiti removal etc– Diesel pressure washer comes with electric start– Both pressure washers have a flow rate of 15L/minute– Standard spec includes 8m hose, adjustable trigger lance and a transport holder for safe storage of lance


WS6230 Poly Trolley Pressure Washer 1350 x 760 x 1150 105L


WS6220 Poly Water Tank – No Pressure Washer 3500 x 1700 x 1340 1100L

WS6221 Poly Water Tank – No Pressure Washer 4200 x 1900 x 1340 2000L

WS6222 Poly Water Tank – Highway Tow c/w 200 bar (3000 psi) Yanmar Diesel Engine Pressure Washer, 8m hose, lance & electric start

3500 x 1700 x 1340 1100L

WS6223 Poly Water Tank – Highway Tow c/w 200 bar (3000 psi) Honda Petrol Engine Pressure Washer, 8m hose & lance

3500 x 1700 x 1340 1100L

WS6229 High pressure hose reel kit 30m (200 bar / 200psi) n/a

Commercial Rainwater Storage

Above Ground Commercial Rainwater StorageWe offer a high quality, market-leading range of retrofitable, large scale rainwater storage solutions

The range features capacities from 1,300 to 10,000 litres; sizes that will really make a difference to metered properties and areas prone to water restrictions in summer months. Our rainwater storage range of rotationally moulded storage tanks are tough, durable and built to last

How it works…Our range of rainwater storage tanks can easily be fitted to existing guttering of a building or incorporated in new builds

They collect rainwater from the roof via the downpipe. The rainwater flows through a filter to remove unwanted debris and then flows straight into the tank. The tank can be used in conjunction with an inline or submersible pump for the extraction of water. A full range of pumps is available

Commercial Rainwater Storage1. Rainwater inlet from roof2. Filter unit to remove dirt and debris from water before it flows

into tank (optional extra)3. Dirty water removed by filter washes back into the drain4. Calmed inlet at bottom of tank so incoming water does not

disturb any settled sediment5. Siphon overflow located at the tank fill level skims off excess

water and floating debris and returns to drain6. 2” bsp outlet for connecting to inline pump or for linking to

additional tank7. Tank fittings for a submersible or inline pump are standard

on all tanks, pumps are advised separately8. 16” lid for inspection and maintenance purposes

uses– WC and urinal flushing– Irrigation and landscape watering– Vehicle washing– Plate cooling– Plant washing– Washdowns

features and benefits– Capacities from 1,300 to 10,000L– GRP storage tanks available up to 20,000L– Immediate connection on site– Facility to link additional tanks as required– Tough and durable rotomoulded

construction– UV protected

WS6200capacityoutletdiameterheight





WS6208Rainwater filter suitable for roof sizes up to 800m2

WS6209Rainwater filter suitable for roof sizes up to 450m2

1,300L2” BSP Male1210mm1415mm





WS6208

WS6209

Below Ground Rainwater Storage TanksAnother very common water storage option is to locate the harvested rain below ground. We offer a comprehensive range of Polyethylene or GRP storage tanks, which provide an unobtrusive and secure solution for any size of building. Tank sizes from 1,800L up to 80,000L are available, providing an economical solution for the storage of large volumes of water

When you order a tank from our range of rainwater storage tanks the following will be included:– Calmed inlet – Overflow siphon – 16” lid – Water inlet

Commercial Rainwater Storage Tank Range

1

3

28

9

64

5

7

Poly Trolley Pressure Washer– Compact and lightweight, mobile pressure washer– Ideal for general site maintenance or washing down

of small equipment, machinery and walkways– Easy to move around site – ideal for getting to areas

where access is limited– Robust and durable design. Strong steel frame and

polyethylene water tank– c/w 100 bar (1500psi) Honda petrol pressure washer

with 8m hose, hose reel and lance

58 59

Spill Containment &

Storage

Spill Containment &

Storage


Fluid Transfer Management System

Fluid Transfer Managem

ent System

Fluid Transfer Managem

ent System

Easier, Faster, Safer, Cleaner – All products are made of industrial grade HDPE, ensuring durability and reliability– All drums have standard neck sizes so they are interchangeable with any of the lids – all lids fit every drum size– Robust design ensures easy handling– All three spout lids have quick-twist spouts, that are easy to open and close. This controls the flow and keeps any dirt out

code description

OS6101 1.5L Drum

OS6102 2L Drum

OS6103 3L Drum

OS6104 5L Drum

OS6105 10L Drum

OS6121 Storage Lid

OS6122 Utility Lid

OS6123 Stretch Lid

OS6124 Stumpy Lid

OS6125 Mini Spout Lid

OS6141 Pump Assembly Kit

OS6142 Stretch Hose Extension

OS6143 Stumpy Hose Extension

OS6155 ID Tag Labeling System

Storage LidWith this lid, drums can be pre-filled for storage or easier transport. This is a convenient alternative to handling bulky 20L drums

Stretch Hose ExtensionsFlexible spout hose attachments for awkward or hard to reach areas. Use as attachments to the Stretch or Stumpy Spout Lids

Four Lid ColoursRed, Blue, Green and Yellow (Other colours available upon request)

Please add the corresponding letters to code when ordering:

Stretch SpoutDesigned for use where precise pouring of lubricants is required including hard to reach areas. Ideal for lower viscosity oils

Utility LidMulti-purpose lid with large outlet hole ensures controlled fast pouring of lubricants. Use this lid with the Pump

ID Labelling Tag SystemHighly visual, simple and reliable identification system for all drums. Helps to ensure the right lubricant is used every time and improves productivity and efficiency

Mini SpoutWith an outlet diameter of approx 7mm, this mini spout is ideal for lubrication jobs where equipment filler holes are small

PumpThis down-stroke discharge pump delivers 1L for approx 14 strokes. Match with a Utility Lid and a drum. Supplied with an outlet hose and anti-drip nozzle

Stumpy SpoutThis wide spout model is especially designed for applications where higher lubricant flow is required

Five Drum Sizes Fully interchangeable with all lids; these drums have an extra wide neck opening for rapid pouring and easy cleaning

Blue

Red

Green

Yellow

B

R

G

Y

Fluid Transfer Management System

Fluid Transfer Management SystemAn innovative and practical solution to deliver clean oil from bulk storage to the point of use.

– Prevent damaging lubricant contamination – could save your company thousands of pounds!

– Eliminate costly and dangerous oil spills– Make lubrication tasks easier, safer and faster

Before After

Not just an oil can – but a Complete Fluid and Lubrication Management System

Can you afford any damage and downtime on your machinery and equipment as a result of contaminated oil?

How would it affect you if your machinery seized up as a result of dispensing the wrong type of oil?

Can you afford to waste or even spill your expensive oils and lubricants?

Did you realise dirt and dust in lubricants are a major cause of bearing failure?

Can you afford to risk this with your machines and equipment?

The World’s only fully integrated lubrication and dispensing system, that effectively:

– Colour codes storage of lubricant grades– Dispenses easily to awkward points– Prevents contamination of oils– Speeds up identification of oils and lubrication jobs – Reduces spills and slips resulting in accidents– Expedites filling and re-filling– Eliminates waste – saves money– Saves time and improves efficiency– Reduces machinery downtime– Leads to an organised workplace– Drastically improves housekeeping– Helps meet your environmental responsibility

Help to protect the Environment, your Workforce, your Machinery & Equipment

60 61

Spill Containment &

Storage

Spill Containment &

Storage


Drum Pumps

Drum

Pumps

Drum

Taps & Vents

Rotary Pump for 210L Drum

features– A cast iron rotary pump for

oils and fuels (not petrol)– Complete with 2” BSP

adaptor

Nylon Piston Pumps

features– Suitable for lubricants, oils,

thinners, industrial solvents, chemical cleaners and detergents

– With nylon suction tube, steel nylon coated rod and viton seals

– Available for 25L and 210L drums

Lever Drum Pump for 210L Drum

features– High output lever action

pump for oil, diesel and anti-freeze.

– Very strong construction– With anti-drip filter cap

210L Drum Vacuum Pump

features– This pump will collect waste oil, liquid borne sludge,

metal chips and other debris– The pump will not lose its prime as the liquid level

drops, eliminating the need to manually bail out the bottom of the sump

– Precision-made from stainless steel– Fast powerful action – fast fill (210L in 90 seconds) –

Powered by compressed air– Automatic shut-off valve when barrel full– Supplied complete with barrel fittings, 2.5m hose and

suction nozzle (38mm dia)– Do not use with volatile fluids, petrol and kerosene etc

210L Drum not included (see page 64 for empty drums)

Heavy Duty Lever Oil Drum Pumps for 25/210L Drum

features– Very robust and durable

pump, suitable for heavier oils– With 1.5m flexi-hose, valve

and nozzle– Supplied with 2” adaptor– Available for 25L and

210L drums

Plunger Cans

features– Use to deliver measured amounts

of flammable liquid to wiping cloths or swabs

– Spring mounted dasher cup with perforated flash arrestor

– Helps reduce noxious vapours and prevent costly evaporation losses

– Made of galvanised steel– Shock resistant, polyethylene

versions also available

Manual Pump for 25L Drums

features– Designed to fit filler points

that are difficult to access– With 1.7m outlet hose and

anti-drip 13mm spout – 2” BSP male threads– Pumps on down stroke

code description

FH8360 Rotary Pump

code description

FH8365 25L Drum

FH8366 210L Drum

code description

FH8361 Lever Pump

code description

FH8370 210L Drum Vacuum Pump

code description capacity

FH8380 Steel Plunger Cans 2.5L

FH8381 Steel Plunger Cans 5L

FH8385 Poly Plunger Cans 0.92L



code description

FH8364 Manual Pump

code description

FH8362 25L Drum

FH8363 210L Drum

Drum Taps & Vents

¾” BSP Poly Drum Tap

features– Suitable for most oils, acids

and caustics– Made from durable

polyethylene

20/25L Drum Tap

features– Suitable for male threaded

25L drums– Self venting for splash

free floor– Made from durable

polyethylene– 61mm Thread

2” BSP Drum Vent

features– Brass valve opens at 0.35

bars– Facilitates pressure balance

when dispensing– Vent aperture can be closed

if required– With nitrile seal

2” BSP Poly Drum Tap

features– Suitable for most oils, acids

and caustics– Ensures high rates of flow– Made from durable

polyethylene

Drum Level Indicator

features– Visual drum level indicator

for horizontal drums– Includes ¾” Self-closing

Drum Tap

code description

FH8340 ¾” BSP Poly Drum Tap

code description

FH8341 20/25L Drum Tap

code description

FH8346 2" BSP Drum Vent

code description

FH8342 2" BSP Poly Drum Tap

code description

FH8350 Drum Level Indicator

¾” BSP Alloy Self Closing Drum Taps

features– Heavy duty tap with self

closing safety feature– Suitable for most oils and fuel– Complete with integral flame

arrestor and nylon seal – Stainless steel version

available with teflon seal

code description

FH8344 Alloy

FH8345 Stainless Steel

2” BSP Brass Tap

features– Heavy duty, self-closing tap

for use on high viscosity fluids, including heavy oils

– With teflon seal

code description

FH8343 2" BSP Brass Tap

Drum Opening Wrench

features– Bronze alloy drum opening

key – double ended wrench– Versatile with multipurpose

wrench heads– Suits virtually all drums– Non-sparking

code description

FH8321 Drum Opening Wrench

FOR EMPTY

DRUMS SEE

PAGE 64 FOR DRUMS

TOPPERS

SEE PAGE 9

62 63

Spill Containment &

Storage

Spill Containment &

Storage


Storage Boxes

Storage Boxes

Electric Pumps, D

rums &

Accessories

Machinery Document Storage Box

features:– Ideal for storing records and documents next to machinery– Can be used on commercial vehicles and forklifts– Made from durable and recyclable polyethylene– Resistant to most chemicals, detergents and oils– Large enough to hold an A4 ring binder

Multi-Purpose Poly Storage Boxes

features:– Heavy duty storage boxes that can be used to store

tools, equipment, PPE and absorbents etc– Fit under workbenches or on lorries and trailers– Made from durable and robust polyethylene– Single handle 3-point locking mechanism

Wall Safety Storage Boxes

features:– Ideal for storage of spill absorbents, fire extinguishers

and emergency breathing apparatus etc– Can either be fixed to the wall or situated on the floor– With rubber seal and polycarbonate windows– Plastic toggles and locking lynch pins– Made from durable and recyclable polyethylene– Green versions available for first aid kits and eye wash stations

Vehicle Storage Box

features:– Excellent storage solution for commercial vehicles – Large capacity – 60L– Use to hold spill absorbents or tools and equipment– Essential for ADR required vehicles– Made from durable and recyclable polyethylene


PSB4010 Machinery Document Storage Box 280 x 85 x 330


PSB4030 Vehicle Storage Box 300 x 430 x 660


PSB4015 Multi-Purpose Poly Storage Box 520 x 360 x 360



PSB4018 Multi-Purpose Poly Storage Box 800 x 480 x480



PSB4020 Wall Safety Storage Box 320 x 255 x 700



Electric Pumps, Drums & Accessories

Plastic Funnel

features– Help prevent spillages and avoid slippery

floors when pouring fluids– Made of tough, durable HDPE– Complete with filter

Plastic Flexispout Funnel

features– Ideal for dispensing in areas that are difficult

to access easily– Made of tough, durable HDPE– Complete with removable filter

code size mm

FH8322 250 x 180

code size mm

FH8323 235

Electric Utility Pumps

features– Excellent quality, multi-use utility pumps with single phase motors– Quick and simple to maintain. Lightweight and compact to transport, with carry handle– Nitrile oil resistant impellers and bronze pump body with stainless steel shaft– With thermal overload trip and ‘run dry’ protection– Max viscosity 150 cp (Not suitable for gasoline, diesel, solvents, thinners or other flammables)– Available in either 230 or 400V 3 phase 50Hz (3 phase pump has no handle)

IBC AdBlue Pump Kits

features– Kit designed to be easy to transfer from one IBC to another– Self priming membrane pump with dynamic seal to minimise the need for maintenance– All kits come with 6m delivery hose, 1m suction hose and IBC Adaptor– Pro kit also comes with a digital flow meter and auto shut-off nozzle

UN Approved Steel and Plastic Open Top Drums

features– Ideal for multiple storage uses including flammables, oily waste and used absorbents– Features an easy-close fastening ring, for secure storage and easy access to contents– Plastic drums are constructed of heavy-duty, chemical resistant polyethylene– Reconditioned tighthead (Twin bung) steel drums also available

code power port size flow rate L/min vertical lift size mm weight

UP8400 230V (1 Phase) ¾” 20 2m 260x160x160 7kg

UP8401 230V (1 Phase) 1” 40 2m 288x199x212 10.5kg

UP8402 230V (1 Phase) 1½” 80 3m 325x242x225 17kg

UP8403 400V (3 Phase) 1½” 80 3m 325x242x225 17kg

code description power flow rate L/min

AP8400 Standard IBC AdBlue Pump Kit 240v 35

AP8401 Pro IBC AdBlue Pump Kit 240v 35


FH8310 Open Top Steel Drum – UN Approved 570 Dia. x 880 210L

FH8319 Tighthead Steel Drum – UN Approved 570 Dia. x 880 210L

FH8315 Open Top Plastic Drum – UN Approved 310 Dia. x 515 30L




1,000L

IBCS ALSO

AVAILABLE –

PLEASE

CONTACT US

FOR ADR

SPILL KITS

SEE PAGE 24

64 65

Spill Containment &

Storage

Spill Containment &

Storage


Pallet Storage Boxes

Storage Bins & Tool Boxes

code description internal base size mm

volumecapacity

weight max loadingcapacity

stackingweight

SC4055 Collapsible Pallet Box 920 x 1120 x 767 790L 51kg 500kg 2750kg

code description internal base size mm

volumecapacity

weight max loadingcapacity

stackingweight

SC4040 Standard Duty Pallet Box 950 x 1145 x 620 700L 38.5kg 500kg 3000kg

SC4041 Standard Duty Box Lid n/a n/a 5kg n/a n/a

SC4042 Heavy Duty Pallet Box 920 x 1120 x 600 600L 40.5kg 500kg 3000kg

SC4043 Heavy Duty Pallet Box c/w 4 Castors, 1 Brake

920 x 1120 x 600 600L 36kg 500kg n/a

SC4044 Heavy Duty Box Lid n/a n/a 6kg n/a n/a

SC4045 Super Heavy Duty Pallet Box 920 x 1120 x 600 600L 48kg 600kg 4000kg

SC4046 Super Heavy Duty Box Lid n/a n/a 6kg n/a n/a

Collapsible Pallet Box

features: – Save up to 70% when transporting these empty boxes, as all side walls can be folded over– Each side can be collapsed completely using an easy-to-operate mechanism– With flap openings on two sides – facilitates easier loading and unloading– Very strong and durable polyethylene with 2 base runners

High Quality Pallet Boxes

features: – Help to make your logistical processes work more smoothly, safely and efficiently– Ideal for bulk handling and storage of goods, especially in the warehouse distribution

and food manufacturing industries– The solid sides and base with smooth profiles provide an excellent environment for loose,

un-packaged products– Stackable – lowest container in a stack can bear a load of up to 4 tonnes– Very strong and durable polyethylene with 3 base runners– Simple to clean and easy to maintain– Suitable for use as a battery storage box– Optional loading castor wheels are available

PALLET STORAGE BOXESStorage Bins & Tool Boxes

Tool Transport and Storage Box

features:– Use to transport and store tools and equipment– Stackable with locking pins, to optimise use of space– With forklift pockets and integrated handles – With lid toggle closures to keep lid secure and integral seal to

keep contents dry– Made of dark grey, durable polyethylene – Trolley version with wheels and handle, also available– Optional side door to allow easy access for long items

(Dim: 500x450mm)– Can also be used as a storage and transport box for

fluorescent light tubes (up to 1550mm long)

Storage Bin with Hinged Lids

features:– Ideal for indoor or outdoor storage of spill absorbents and

granules, salt, sand and grit– Stackable for easy storage and with forklift access pockets for

easy transportation– Easy access with angled lid to allow water build-up to run off– Durable and robust polyethylene– 400L storage box is fitted with plastic toggles and lynch pins

as standard


TB4000 Tool Transport & Storage Box 600 x 800 x 530 150L

TB4001 Tool Transport & Storage Box with wheels and folding handle

600 x 800 x 530 150L



TB4004 Tool Transport & Storage Box with side door

840 x 1700 x 800 750L


GB8104 Storage Bin c/w Hinged lid 850 x 500 x 750 130L



GB8105

GB8106

FOR WHITE

ROCK SALT

SEE PAGE 28

66 67

Spill Containment &

Storage


Entrance Matting 70Anti-Fatigue Matting 72GripTape™ , LadderGrip™ 78 & FootGrip™ FootSafe™ 79FootSafe™ Grating 80Floor Paint 81Floor Repair Products 82Ladders & Access Equipment 83Access Platforms 90Barriers 92Linemarkers 93Manual Handling 94UniSweep™ Super Brooms 103Safety Signs 105Good-to-Go Systems 106Ratchet Straps & Applicator 108Industrial Lubricants 109Food Grade Lubricants 111Packaging Products 112


Storage Containers

Stacking Storage Containers

features:– Unique frame design gives these containers super strength– Hinged lids available for all sizes (apart from largest sized

containers – 600x800mm)

Optional Extras – POA– Hinged Lids – Snap lock clips – Hinge Protectors

Stack and Nest Containers

features:– High performance containers designed for use within

automation and conveyor systems– Nest inside each other for cost and space saving in storage

and transit– Containers with fold-out attached lids also available

code external dimensions

internal capacity

weight

SC4060 200 x 300 x 120 5L 0.4kg

SC4061 300 x 400 x 120 10L 0.9kg

SC4062 300 x 400 x 170 15L 1.0kg

SC4063 300 x 400 x 220 20L 1.4kg

SC4064 300 x 400 x 325 30L 1.7kg

SC4065 400 x 600 x 75 14L 1.2kg

SC4066 400 x 600 x 120 20L 1.5kg

SC4067 400 x 600 x 170 30L 2.0kg

SC4068 400 x 600 x 220 40L 2.2kg

SC4069 400 x 600 x 325 60L 2.7kg

SC4070 400 x 600 x 425 90L 3.4kg

SC4071 600 x 800 x 220 90L 4.2kg

SC4072 600 x 800 x 325 134L 5.3kg

SC4073 600x 800 x 425 175L 7.2kg


capacity weight

SC4098 386 x 582 x 135 Up to 150kg 3.2kg

SC4099 600 x 800 x 200 Up to 500kg 7.8kg

code external dimensions internal capacity weight

SC4090 400 x 600 x 300 50L 2.4kg

SC4091 400 x 600 x 265 50L 2.8kg

SC4092 400 x 600 x 310 56L 3.1kg

SC4093 400 x 600 x 370 67L 3.5kg

Wheeled Container Dolly

features:– Small dolly for 400x600mm containers – c/w 4 steering

castors (1 with brake)– Large dolly for 600x800 containers – c/w 2 steering and 2

fixed castors


internal capacity

weight

SC4080 300 x 400 x 235 20L 1.5kg

SC4081 400 x 600 x 325 45L 2.4kg

Stacking Storage Containers – Automotive

features:– Designed especially for use in the automotive industry; also

unlimited uses in many other industries– Hinged lids available for both sizes

Optional Extras – POA– Hinged Lids – Snap lock clips – Hinge Protectors

Storage Containers

P.72Anti-FatigueMatting

P.83Access Equipment

P.94ManualHandling

SC4073

SC4068SC4065

SC4064

SC4071

SC4090

SC4092

SC4091

SC4093

68 69




EcoMat™

features– Manufactured using 100% recycled materials– Heavy recycled rubber backing minimises movement

on carpet and hard floor surfaces– Raised pattern removes dirt and debris whilst trapping

it in the mat, preventing dirt migration– Mat height: 10mm

colour options Please add the corresponding letters to code when ordering:

Exterior Mat

features– Raised circular surface for superior slip resistance– Moulded bevelled edge helps to reduce tripping– Made from very hard wearing rubber– Mat height: 14mmm


EM4012 EcoMat™ 600 x 900

EM4013 EcoMat™ 900 x 1500

EM4014 EcoMat™ 1200 x 1800


EM4030 Exterior Mat – Black 900 x 1500


EM4006 UniWash Mat™ 600 x 850





EM4024 Rubber-Tip Mat™ – Black 600 x 800




EM4016 DuroMat™ 600 x 900

EM4017 DuroMat™ 850 x 1500

EM4018 DuroMat™ 1150 x 1750


EM4031 Grab-a-Mat™ – White (Pk of 4 mats) 460 x 1170

Entrance Matting Entrance Matting

UniWash Mat™

features– Washable entrance mat which holds up to 3.5L /m2

– Traps up to 90% of tracked-in dirt, moisture and grit– Bleach and fade resistant with non-skid nitrile rubber backing– Mat height: 9mm


Rubber-Tip Mat™

features– Natural rubber flexible ‘fingers’ scrape and trap dirt on shoes– Safety bevelled edging for trip prevention– Slip resistant base holds mat in position– Easy to clean – simply shake out or hose down– Ideal for all weather conditions– Mat height: 16mm

DuroMat™

features– Extremely hard wearing polypropylene loop pile surface– Rugged nitrile rubber backing for longer life span– Effectively retains moisture from shoes – raised edges

contain dirt and moisture, protecting floors– Reinforced raised moulded pattern surface scrapes dirt– Mat height: 7mm


Grab-a-Mat™

features– An economical solution for contamination control– Manufactured from an anti-microbial agent– Adhesive coated surface captures dirt and dust particles– Traps dirt from wheels and pedestrian foot traffic– Disposable layers – peel off soiled sheets to reveal

a clean layer. Each mat contains 30 layers– Adhesive backed mats, stick directly to the floor surface– Mat height 1.5mm

Make a SAFE and IMPRESSIVE entrance to your reception with our range of stylish & functional mats

VynaMat™

features– Economical, yet effective scraper mat– Slip and stain resistant PVC backing– Pile material made of 100% polypropylene– Mat height: 4mm


Ultimate Track Tiles

features– Creates a smart and stylish entrance to your workplace– Flexible, fire retardant, PVC tile with high quality

carpet insert designed to scrape dirt and absorb moisture– Suitable for both indoor use and external covered areas– Easy to fit and clean – simply roll up and vacuum– Tile height: 15mm


EM4000 VynaMat™ 600 x 900

EM4001 VynaMat™ 900 x 1200

EM4002 VynaMat™ 900 x 1500

EM4003 VynaMat™ 1200 x 1800


EM4020 Ultimate Track Tiles – Blue 300 x 450

EM4021 Ultimate Track Tiles – Anthracite 300 x 450

Brown

Blue

Red

Steel

BR

B

R

S B

Brown

Blue

Red

Steel

BR R

S

Brown

Blue

Black

Red

Light Grey

BR

B

BL

R

L

Brown

Blue

Black

Steel

BR

B

BL

S

Entrance Matting

Entrance Matting

Made entirely from recycled plastic bottles and tyres

70 71


Anti-Fatigue Matting

A scientific study has emphatically confirmed that anti-fatigue mats can significantly increase comfort to workers who stand for prolonged periods of time and also help to reduce fatigue

– Prolonged standing on hard surfaces can lead to serious conditions such as Varicose Veins and other circulatory problems. These conditions can be irreversible and cause distress for sufferers

– Standing for lengthy periods can cause discomfort to the feet, legs and back. It can cause stiffness to the neck and shoulders. Standing for long periods is one of the most common causes of physical fatigue

– Anti-fatigue matting helps to promote regular movement as the feet naturally adapt to the cushioned surface of the mat. The movement of muscles contracting and expanding is very subtle but is enough to reduce, or even prevent, the health risks associated with standing. It helps increase blood flow and helps oxygen reach the heart

– Increasing comfort by installing anti-fatigue matting helps to improve concentration, reducing the potential for accidents, and also helps to increase productivity

– Back pain is a huge concern for employers and more so for sufferers. The scientific study confirms that the use of mats has a beneficial effect on the postural comfort to those who stand for long periods of time compared to standing on concrete

Icon Key

The key below illustrates the special product features that each icon indicates. These icons are used throughout the following Anti-Fatigue Matting pages to help you make the right product choice quickly for your particular application or environment



Anti-fatigue Fire retardant Slip retardant Oil retardant Wet conditions


AF4050 Premier Anti-Fatigue Mat – Black 600 x 900

AF4051 Premier Anti-Fatigue Mat – Black 900 x 1500

AF4052 Premier Anti-Fatigue Mat – Black 900 x 18.3m

AF4055 Premier Anti-Fatigue Mat – Grey 600 x 900

AF4056 Premier Anti-Fatigue Mat – Grey 900 x 1500

AF4057 Premier Anti-Fatigue Mat – Grey 900 x 18.3m

AF4060 Premier Anti-Fatigue Safety Mat – Black/Yellow

600 x 900


900 x 1500


900 x 18.3m


AF4075 Knee Protector Mat – Black 530 x 360


AF4065 Premier Diamond Mat – Black 600 x 900

AF4066 Premier Diamond Mat – Black 900 x 1500

AF4067 Premier Diamond Mat – Black 900 x 18.3m

AF4070 Premier Diamond Safety Mat – Black/Yellow

600 x 900


900 x 1500


900 x 18.3m


Premier Anti-Fatigue Mats

features: – Extremely comfortable standing surface– Offers excellent fatigue relief– Pebble surface gives some slip-resistance in dry environments– Manufactured from 100% closed cell vinyl foam– Premier Anti-Fatigue Safety Mats are also available with

bright yellow borders to increase safety awareness– Bespoke lengths can be cut to size – POA– Mat height: 9mm

Premier Diamond Anti-Fatigue Mats

features: – Diamond pattern provides additional underfoot grip– Designed to offer comfortable underfoot cushioning– Offers excellent fatigue relief– Ideal for assembly areas and packing stations– Premier Diamond Safety Mats are also available with

bright yellow borders to increase safety awareness– Bespoke lengths can be cut to size – POA– Mat height: 9mm

Knee Protector Mat

features: – Reduces knee pain and lower back stress caused by

regular kneeling– Very lightweight and easy to carry with built-in handle– Resistant to oils and chemicals– Manufactured from a closed cell PVC/nitrile blend– Mat height: 25mm

Anti-Fatigue M

atting

Anti-Fatigue M

atting

Proof that we can help increase comfort and productivity!

72 73


Anti-Fatigue Matting Plant Safety & Maintenance



AF4076 Fatigue Relief Mat – Black 600 x 900

AF4077 Fatigue Relief Mat – Black 600 x 18.3m



AF4080 Fatigue Relief Mat – Black 900 x 18.3m

AF4081 Fatigue Relief Mat – Black 1200 x18.3m


AF4100 Comfort Mat Duro (Edged all round) – Black 700 x 800

AF4101 Comfort Mat Duro (End Piece) – Black 700 x 800

AF4102 Comfort Mat Duro (Middle Piece) – Black 700 x 800


AF4095 Comfort Mat (Edged all round) – Black 600 x 900

AF4096 Comfort Mat (Edged all round) – Black 900 x 1200

AF4097 Comfort Mat (End Piece) – Black 600 x 900

AF4098 Comfort Mat (Middle Piece) – Black 600 x 900


AF4110 Pro Anti-Fatigue (Tile) – Black 900 x 900

AF4111 Pro Anti-Fatigue (Tile) – Blue 900 x 900


AF4085 GripPlate™ Mat – Black 600 x 900




AF4090 GripPlate™ Safety Mat – Black/Yellow 600 x 900

AF4091 GripPlate™ Safety Mat– Black/Yellow 900 x 1500




Fatigue Relief Mat

features: – A fused, unique dual layered mat providing superior comfort– Tough PVC foam top surface – extremely resilient to wear and tear– Excellent fatigue relief performance– Low-density bottom layer gives underfoot cushioning– Reduces pressure on the back, legs and feet– Stimulates circulation – insulates feet from cold, concrete floors– Bespoke lengths can be cut to size – POA (Widths of 900mm

or 1200mm)– Mat height: 12.5mm

Comfort Mat Duro

features: – Good resistance to oils and grease and withstands high

temperature environments– Diamond surface provides excellent slip resistance– Interlocking modules to create any length of matting

in widths of 700mm– Provides fatigue relief and comfort during prolonged standing– Mat height: 12.5mm

Comfort Mat

features: – Manufactured from a hard wearing rubber compound– Comfortable standing surface – reduces fatigue– Bubble surface stimulates blood circulation to feet– Ideal for use where operatives stand in static positions– Interlocking modules to create any length of matting in

widths of 600mm– With safety bevelled edges– Mat height: 14mm

Pro Solid Anti-Fatigue Tiles

features: – Interlocking tiles made from natural rubber– Good resistance to oils and grease and is fire retardant– Provides underfoot cushioning for effective fatigue relief– Can withstand temperatures of up to 160

oC and spillages of

molten glass– Flexible solution – individual tiles can be replaced

or repositioned with ease– 100% nitrile version is also available – for heavy,

oily industrial applications – POA – Mat height: 17mm

GripPlate™ Mats

features: – Soil Resistant PVC diamond surface that is very tough and

durable. Gives greater traction and extended wear– Comfortable foam cushion backing relieves fatigue from

prolonged standing on cold, hard concrete floors– Withstands heavy and demanding industrial conditions– Self-extinguishing top surface resistant to many industrial chemicals– Supplied with ramped edges (Widths of 900mm or 1200mm)– Grip-Plate Safety Mats are also available with bright yellow

borders to increase safety awareness– Bespoke lengths can be cut to size – POA – Mat height: 14mm

Pro Anti-Fatigue Tiles

features: – Interlocking tiles made from hard-wearing rubber– Soft, yet resilient material offers fatigue relief benefits– Spilt liquids drain through the open holes for safety underfoot– Modules interlock to fit any size area– Blue tile is grease and oil proof – ideal for food

manufacturing environments– Mat height: 19mm

Anti-Fatigue M

atting

Anti-Fatigue M

atting


AF4105 Pro Solid Anti-Fatigue (Tile) – Black 900 x 900

AF4106 Pro Anti-Fatigue (Bevelled Edge/Corner Male)

n/a

AF4107 Pro Anti-Fatigue (Bevelled Edge/Corner Female)

n/a

74 75

Blue

Red


Anti-Fatigue Matting Plant Safety & Maintenance



Enduro™ Mat

features: – Very comfortable – reduces fatigue from standing– Interlocking modular sections– Provides coverage of any length in 900mm or 1500mm widths– Raised circular surface for superior slip resistance– Spilt liquids drain through open holes– Made from a combination of natural SBR rubber and nitrile– Mat height: 12.5mm

Multi-Deck™ Tiles

features: – Flexible PVC tile suitable for many industrial environments– Textured top surface for excellent slip resistance– Holes and studs underneath provide excellent drainage– Insulates the user from cold, hard concrete floors– Bevelled edges and corner pieces available– Resistant to most oils and chemicals– Mat height: 13mm


ProZone™ Mats

features: – Interwoven PVC mat with safety bevelled edging– Standard duty hole size 22mm x 22mm– Open weave allows very easy cleaning of mat– Reduces operator fatigue caused by standing– Cross-ribbed – helps reduce slipping in wet or oily environments– Fire retardant and resistant to most oils and chemicals– Conforms to Slip Resistance Test EN 13552 Category R10– Elite heavy duty version also available, for use where fork and

pallet trucks pass over. Hole size – 22mm x 10mm– Mat height 12mm

Super Safe Mat

features: – Heavy duty, very hard wearing mat with moulded bevelled edge– Relieves operator fatigue from standing– Helps to reduce slips in wet environments– Unique underside design holds mat firmly in position– Open holes capture dirt and debris– Grease-proof option supplied in blue – ideal for grease and

aggressive machine oils– Manufactured from a combination of SBR rubber and nitrile– Mat height: 15mm

UniRib™ Matting

features: – Slip-resistant, made from hard-wearing rubber– Helps to insulate from cold concrete floors– Prevent damage to parts etc– Use on shelves, tool boxes, vehicles etc– Wide rib and anti-static also available– Electrical switchboard version also available– Bespoke cut lengths up to 10m– Mat height: 3mm (6mm also available)


AF4120 Enduro™ Mat (Edged all sides) – Black 900 x 1500

AF4121 Enduro™ Mat (2 long, 1 short edged sides) – Black 900 x 1500

AF4122 Enduro™ Mat (2 long edged sides) – Black 900 x 1500

AF4123 Enduro™ Mat (2 short, 1 long edged sides) – Black 900 x 1500

AF4124 Enduro™ Mat (2 short edged sides) – Black 900 x 1500code description size mm

AF4135 Multi-Deck™ Tile (Pk of 9) 300 x 300

AF4136 Multi-Deck™ Female Edge (Pk of 6) n/a

AF4137 Multi-Deck™ Male Edge (Pk of 6) n/a

AF4138 Multi-Deck™ Corner (Pk of 4) n/a


AF4140 UniRib™ Matting Roll – Black 900 x 10m

AF4141 UniRib™ Matting Roll – Black 900 x per linear metre

AF4142 UniRib™ Matting Roll – Black 1200 x 10m

AF4143 UniRib™ Matting Roll – Black 1200 x per linear metre


AF4127 ProZone™ Mat 600 x 1200



AF4130 ProZone™ Elite Mat 600 x 1200




AF4125 Super-Safe Mat – Black 900 x 1500

AF4126 Super-Safe Mat – Blue (grease-proof) 900 x 1500

B

R

UniMat™

features: – Hygienic anti-microbial properties inhibit growth of bacteria – Manufactured from 100% nitrile – very durable surface– Excellent resistance to grease, oils, fats and detergents– Raised textured ‘cross-grip’ surface for slip-resistance– Open holes allow spilt liquids to drain through the mat– Ideal for food processing areas– With safety bevelled edges all round– Mat height: 9mm


AF4150 UniMat™ – Black 850 x 1400

Anti-Fatigue M

atting

Anti-Fatigue M

atting

For Absorbent Rolls - See page 6

AF4120 AF4123

AF4121AF4122

AF4124

76 77

FootSafe™ Stair Treads

features: – The majority of external staircases are constructed from steel

and they are notoriously slippery in wet and icy conditions – This is where FootSafe™ comes into its own

– A special hard wearing grit is applied to the top surface that not only provides an extremely slip resistant surface but also withstands very heavy foot traffic

– Manufactured using multiple layers of fibreglass and specially formulated resins

– The nosing is 55mm in size and is clearly visible in bright yellow, which means that the step edge is easily identified when ascending and descending

– Using a combination of adhesive and mechanical fixings, FootSafe™ can be fitted over the existing treads quickly and provides an immediate and long lasting solution to slip problems

key benefits:– High Durability– Slip Resistant– Corrosion Resistant– Simple to install– Complies with UK Building Regulations – Complies with obligations under the Disability Discrimination Act– Ideal for walkways, fire escapes, landings, steps and footbridges etc


GripTape™, LadderGrip™ & FootGrip™ Plant Safety & Maintenance


FootSafe™

GripTape™

features: – Abrasive grit tape with self-adhesive backing– Helps to reduce the risk of slipping on smooth surfaces– Hard wearing and easy to install– Ideal for stair treads, ramps, walkways, entrances, loading docks,

machinery and plant equipment, vehicles and boats– Conforms to Slip Resistance Test EN13552 Category R13

FootGrip™

features: – FootGrip™ is a slip resistant, step-edge coloured nosing – Fits almost any internal or external stair. Rear of nosing has

a feathered edge– High visibility colour, yellow (Luminescent version also available)– Quick and easy to fit – minimises disruptions to work place– Constructed by combining polyester resins with fibre reinforcements– Can be supplied to the required size or in full lengths for cutting

to suit on site

are you complying?– FootGrip™ has been developed as a cost effective, long-term

solution to the obligations of the Disability Discrimination Act Part III. This states that, all stairs accessible by members of the public, should have a contrasting coloured nosing fitted to the step edges and should provide a slip resistant surface

two types of grit surface are available: – Type ‘G1’, with its smaller grit size, offers good slip resistance

whilst allowing a surface that is reasonably easy to clean– Type ‘G2’, with a much heavier grit profile is ideal for the rigours

of the external environment

LadderGrip™

features: – Designed specifically to fit over traditional round, steel ladder rungs– Enhances your ladder safety, by enlarging the rung surface area– Grit surface helps to make the rungs slip resistant– Constructed from durable and hard-wearing fibreglass – Ladder-Grip can be cut to the required length, free of charge

FootSafe™ Landing Covers

features: – The landing covers serve the same purpose as the FootSafe™

stair treads but their additional depth allows most landing areas and top steps to be covered without the need for joints

FootSafe™ Flat Sheets

features: – The flat sheets have the same characteristics as the

FootSafe™ stair treads and landing covers– Ideal for landings, fire escapes, walkways, ramps,

gangways, factory floors and footbridges etc– A free cutting service is available to provide

panel sizes as required


SG1000 Grip Tape™ Abrasive Grit Tape – Black 50 x 18.3m

SG1001 Grip Tape™ Abrasive Grit Tape – Yellow 50 x 18.3m

SG1002 Grip Tape™ Abrasive Grit Tape – Red 50 x 18.3m



SG1005 Grip Tape™ Abrasive Grit Tape – Black/Yellow 50 x 18.3m


SG1010 FootGrip™ Anti-Slip Stair Nose – Yellow (G1) 750 x 70 x 30









LG1010 LadderGrip™ 400 x 25 x 25







MA4024 FootSafe™ Landing Covers – Yellow / Black 800 x 1200



code description size mm max depth mm

MA4020 FootSafe™ Stair Tread – Yellow/Black

750 x 250 345


1000 x 250 345


1500 x 250 345


3000 x 250 345


MA4027 FootSafe™ Flat Sheet – Black 800 x 1200




MA4035 Adhesive 310ml Cartridge (Box of 12) 310ml

Before After FootSafe™

GripTape™

, LadderGrip™

& FootG

rip™

78 79


Floor Paint Plant Safety & Maintenance

Polyurethane Floor Paint features: – Dustproofs, seals and transforms

drab concrete floors– Easy to apply and dries quickly to

a tough, mid-gloss finish Two coats applied by roller will seal and protect concrete from spillages No primer required – saves time

– Usage rate: Up to 40m2 per 5L per coat (two coats normally required)

Epoxy Floor Paint

features: – Highly decorative and extremely tough,

non-flammable resin floor coating – Combines hardness and bonding

power to provide a long lasting heavy duty finish

– Ideal for concrete floors in workshops, factories and warehouses etc

– Usage rate: up to 28m2 per 4L per coat (two coats normally required)

Clear Multi Purpose Seal

features: – Penetrates deeply and hardens to

provide a tough dustproofed surface – Solvent free, virtually odourless and

non-flammable– Ideal for use on new or old concrete,

screeds, block paving, brick, blockwork and plaster walls

– Usage rate: Up to 30m2 per 5L per coat (one coat normally sufficient)

Floor Paint Slip Resistant Grade

features: – Ideal for slippery concrete floors (Suitable for large areas)– The anti-slip aggregate is pre-blended with the paint to

produce an evenly textured, slip resistant finish– No primer required – easy to apply, dries quickly and very hard– Usage rate: Up to 40m2 per 5L per coat (two coats normally

required)

Treadsafe

features: – Hard wearing, epoxy resin anti-slip coating for concrete, stone,

metal and wood– Three pack system, easily applied in a thick coat and finished by

rolling in wearing particles which will withstand very heavy traffic such as forklifts and other vehicles

– Ideal for use on floors, stairs, ramps, loading bays etc – Usage rate: 5m2 per pack (only one coat is required)


FP7100 Safety Yellow 5L

FP7101 Tile Red 5L

FP7102 Mid Green 5L

FP7103 Mid Blue 5L

FP7104 White 5L

FP7105 Mid Grey 5L



FP7111 Tile Red 4L

FP7112 Mid Green 4L

FP7113 Mid Blue 4L

FP7114 White 4L

FP7115 Mid Grey 4L



FP7131 Safety Red 5L

FP7132 Tile Red 5L

FP7133 Safety Green 5L

FP7134 Mid Blue 5L

FP7136 Mid Grey 5L



FP7126 Tile Red 5L

FP7127 White 5L

FP7128 Mid Grey 5L


FP7120 Clear 5L

FP7121 Clear 25L

Floor Paint


FootSafe™Plant Safety & Maintenance

FootSafe™ Grating

features: – Ultimate and reliable performance even in the most

demanding conditions– Incorporates an embedded grit top surface– Suitable for heavy industrial traffic areas– The grating is very flexible and may be repeatedly

deflected without causing permanent deformation– Easy to install with no heavy lifting or specialist equipment– For use in harsh environments such as oil rigs, coastal

applications, chemical plants and walkways

key benefits: – Slip Resistant FootSafe™ grating incorporates an embedded grit top surface.

This surface exceeds the minimum requirements for slip rating as set out in the UK Slip Resistant Group Guide 2002

– Impact Resistant Impact resistant due to strength and flexibilty– Lightweight Very easy to install and requires no heavy lifting or specialist equipment– Fire Retardent Tested in accord with BS 476: Part 7 Class 1– Corrosion Resistant Suitable for use even in the harshest of environments, such

as oil rigs, coastal applications, chemical plants and walkways etc

– A free cutting service is available to provide panel sizes as required


FootSafe™ Grating Ramp

features: – This ramp is ideal for use where the grating panel is raised slightly

above the substrate. The ramp is attached to the grating and allows easy access on to the grating areas


MA4045 FootSafe™ Grating Panel – Grit Top 1985 x 996 x 25 (Thick)







MA4057 FootSafe™ Grating Ramp 120 x 996 x 25 (Thick)

MA4058 FootSafe™ Grating Ramp 120 x 996 x 38 (Thick)

Yellow GreenY G

FootSafe™

OTHER GRID COLOURS AND HOLE SIZES ARE AVAILABLE ON REQUEST

80 81

code description height extended length weight

LA3000 4-Rung Pro Ladder Step 1.22m – 2.01m Trestle 1.22mStored 1.28m

2.48 – 4.16m 16kg

LA3001 5-Rung Pro Ladder Step 1.48m – 2.46mTrestle 1.48mStored 1.56m

3.05 – 5.21m 19kg

LA3002 6-Rung Pro Ladder Step 1.75m – 3.06m Trestle 1.75mStored 1.83m

3.59 – 6.38m 25kg

code description height open footprint weight

LA3007 2-Tread Safety Step Top Tread 0.45m Closed 0.80m

0.52 x 0.58m 7kg


0.54 x 0.86m 9kg


0.58 x 1.16m 11.5kg

code description height weight

LA3005 5-Tread SuperStep™ Step 0.76 – 1.52m Stored 1.54m

12kg

LA3006 Air Deck Attachment n/a n/a


Ladders Plant Safety & Maintenance


Pro Ladder

features: – Designed specifically for the rigorous demands of professionals – 24 ladders in one – Heavy-wall 6005-T5 aerospace grade aluminium– Tip and Glide wheels fitted for ease of movement around site– Super strong reinforced triple locking hinge – can be used on stairs– Reinforced double welds for extra strength– Can be positioned on slopes with optional leg leveler– 150kg work load capacity

Safety Step

features: – A unique combination of strength and simplicity– Open and close steps with one hand– Tough compact construction for industrial use– Large 360mm deep ‘platform’ treads– Tip and Glide wheels and slip-resistant steps– 150kg work load capacity

SuperStep™

features: – The world’s only multi-position stepladder that can safely be used on stairs and sloping ground– 5, 6, 7, and 8-tread stepladder in one– Deep 100mm anti-slip treads– Extra wide base with flared legs for stability and safety– Features large comfortable standing platform– Integrated moulded tool tray– Tip and Glide wheels for easy transport– Air Deck - magnetic, multi-use tray for tools and materials. Also use as an extra safety handrail– 150kg work load capacity

Lifetime

Warranty

5-year

Warranty

5-year

Warranty

PLEASE SEE PAGE 88 FOR OUR PRO AND GENERAL LADDER ACCESSORIES

ENSURE YOUR LADDERS AND EQUIPMENT ARE KEPT IN SAFE WORKING ORDER WITH OUR GOOD-TO -GO SAFETY CHECKLIST SYSTEM ON PAGE 106

Ladders

Floor Repair Products

Floor Repair Products

Epoxy Repair Mortar

features: – Multi-use epoxy resin repair mortar

for concrete or stone– Sets very hard on most surfaces– Ideal for repairs to factory floors,

driveways, worn and broken steps– No primer needed – apply in layers of up

to 50mm deep for maximum strength– Pre-blended for immediate and easy use– Usage rate: 5kg covers 0.6m2 at

5mm thickness

Cement Cleaner / Etchant

features: – A mild acid based cleaner for the preparation of concrete

floors prior to painting– Etches a key prior to painting – essential on smooth surfaces– Removes light dirt and loosens cement deposits– Also suitable for external brickwork, paving, stonework etc– Usage rate: Up to 15m2 per 5L

Speed Patch Pourable Grade

features: – Quick setting and pourable for heavily

used concrete floors inside and outside– No primer is required – just mix the

powder with water and pour into the hole– Bonds to wet or dry surfaces and can be

applied to thicknesses of up to 100mm– Rapid setting – ready for foot traffic after

30 minutes and heavy traffic after 2 hours– Usage rate: 25kg covers 2.5m2 at 5mm

thickness

Asphalt Repair Mortar

features: – Quick repair for pot-holed asphalt and concrete– Simple to use – no mixing required– Repairs can be driven over immediately after application– Withstands heavy traffic– Ideal for repairs 10 – 70mm thick– 4.5kg square tamper with a 1.3m steel shaft is also available

Speed Screed

features: – A self-smoothing, hard wearing material

which rapidly transforms uneven floors– Industrial use for indoors and outdoors– Provides a finished mid grey, non-dusting,

slip-resistant surface – Pre-blended for immediate and easy use

– apply from 3mm to 15mm thick– Usage rate: 25kg covers 3.7m2 at

3mm thickness

code size

FP7140 2.5kg

FP7141 5kg

FP7142 25kg

code size

FP7145 5L

FP7146 25L

code size

FP7143 25kg

code size

FP7147 25kg

FP7148 4.5kg (1.3m Steel Shaft)

code size

FP7144 25kg

Asphalt Repair1. Clean 2. Prime 3. Infill 4. Compact 5. Ready for Traffic

82 83

code description rungs extended length closed height weight

LA3025 2.5m Double 2 x 9 4.25m 2.50m 11kg

LA3026 3.0m Double 2 x 11 5.25m 3.00m 13kg

LA3027 3.5m Double 2 x 13 6.25m 3.50m 17kg

LA3028 4.0m Double 2 x 15 7.25m 4.00m 20kg

LA3029 4.5m Double 2 x 17 8.25m 4.50m 27kg

LA3030 5.0m Double 2 x 19 9.25m 5.00m 30kg

LA3031 5.5m Double 2 x 21 10.00m 5.50m 32kg

LA3032 2.5m Triple 3 x 9 6.00m 2.50m 19kg

LA3033 3.0m Triple 3 x 11 7.50m 3.00m 27kg

LA3034 3.5m Triple 3 x 13 9.00m 3.50m 32kg

LA3035 4.0m Triple 3 x 15 10.00m 4.00m 37kg

code description height extended length

LA3040 4-6 Tread Platform 1.08 – 1.60m 2.46m

LA3041 5-7 Tread Platform 1.60 – 2.15m 3.02m


Ladders Plant Safety & Maintenance


Industrial Extension Ladder

features: – Tough, extra heavy duty aluminium construction– Double and triple extension ladders can be split for

use as single sections– Comfortable, slip resistant, ‘D’ shaped twist-proof rungs – Non-slip rubber feet– 175kg work load capacity – BS 2037 Class 1

Professional Platform Stepladders

features: – Lightweight and durable, with extra large platform for

comfortable working space– Twin safety handrails fitted with hand grips– Strong, deep treads for comfort and security– High support rail and handy work tray for small tools– 150kg work load capacity

Adjustable Maxi Work Platform

features: – Very safe and stable access platform – Meets requirements of 2005 Working At Height Regulations– Adjustable working height up to 3.6m, assembled in seconds– Large platform area and full guardrail (360o working)– Wheels for easy transportation and integral locking stabilisers– 150kg work load capacity

5-year

Warranty

5-year

Warranty

5-year

Warranty


LA3045 3 Tread Stepladder

Platform 0.58mClosed 1.42m

0.45m x 0.90m 5kg



0.47m x 0.94m 6kg



0.49m x 0.98m 6.5kg



0.52m x 1.04m 7.5kg



0.54m x 1.08m 9kg

Ladders

Ladders


LA3010 PAL 4 x 3-Treads

Step 1.75m Work Bench 0.98m Stored 1.00m

3.70m 12.5kg

LA3011 PAL 4 x 4-Treads

Step 2.30m Work Bench 1.28m Stored 1.30m

4.80m 15.5kg

LA3012 Work Bench Plank for PAL 4 x 3-Tread

n/a n/a n/a

LA3013 Work Bench Plank for PAL 4 x 4-Tread

n/a n/a n/a


LA3015 Combination 2.0m Ladder

Step 1.94m Stored 2.04m

4.20m 15kg



5.65m 19kg



6.25m 21kg



8.10m 31kg


LA3020 Extend Pro Ladder 13 Rungs

Stored 0.81m 3.80m 15.0kg

LA3021 Extend Pro Ladder Carry Case

n/a n/a n/a

Ladders

Pro Adjustable Ladder (PAL)

features: – Robust engineering and construction ensures proven

performance within intensive use environments– Reinforced locking hinge - enables user to configure the PAL

as a workbench, A-frame step and extension ladder– Durable black anodised finish– Splayed legs for additional stability– 150kg work load capacity

Extend Pro Ladder

features: – Specifically for the professional contractor or surveyor– New lock tabs are very responsive for smooth adjustment – up and down– Extends and locks rung by rung– Compacts down to a remarkable 0.81m – Optional extra carry

case available– Store in your car boot, under your desk or in a cupboard– 150kg work load capacity

Combination Ladder

features: – Multi-use ladder: Triple ladder, an A-frame stepladder,

a stairwell ladder together with a telescopic safety base– Unique telescopic splayed base stabiliser for uneven ground– Shaped rungs for comfortable climbing– Strong nylon coated steel guides for ease of adjustment– Integrated wall wheels as standard to assist placement– Aluminium locking stays for additional rigidity– 150kg work load capacity

Lifetime

Warranty

5-year

Warranty

5-year

Warranty

Model shown with optional ladder stand off and protector

84 85

Truck Dock

features: – Ideal for safe access to truck-beds and shipping containers– Locking device secures the Truck Dock for climbing at a

comfortable 48 degree slope– Chain access is provided at the top of the step to all sides for ease of use– Swivel castors retract when lever-lock is used– Platform size 750mm x 1200mm– Strong welded tubular steel – 150kg work load capacity


Steps Plant Safety & Maintenance


Mobile Steps

features: – Steel narrow aisle steps, widely used in office, library and

archiving environments– Strong sprung castors lock and hold in place when weight is applied– Easy to manoeuvre in tight spaces– Made from robust tubular steel with anti-slip treads– 150kg work load capacity

Mobile Safety Steps

features: – Strong traditional steel warehousing step for commercial applications– Double handrail, toe-boarded platform with enclosed guardrail– With anti-slip treads to prevent slips when climbing and descending– Simple lift and lock mechanism with safety bar to restrict access

when step not in use– Strong tubular steel construction – also available in stainless steel– 150kg work load capacity

5-year

Warranty5-year

Warranty

5-year

Warranty

code description height overall footprint weight

LA3080 4-Tread Mobile Safety Steps

Top Tread 1.00m Overall 1.92m

1.03 x 0.75m 32kg


Top Tread 1.25mOverall 2.17m

1.21 x 0.85m 55kg



1.40 x 0.85m 62kg



1.44 x 0.85m 70kg



1.59 x 0.85m 78kg



1.86 x 0.90m 98kg



2.17 x 1.00m 116kg



2.44 x 1.20m 130kg



2.79 x 1.20m 138kg


LA3075 2-Tread Mobile Steps


0.49 x 0.59m 10kg



0.49 x 0.70m 13kg



0.56 x 0.86m 14kg



0.56 x 1.03m 16kg


LA3090 4-Tread Truck Dock


1.90 x 0.96m 55kg

LA3091 5-Tread Truck Dock


2.14 x 0.96m 60kg

Steps

Steps

Podium

features: – Single user, low-level tower with fully enclosed work zone– Constructed from tough yet lightweight aluminium components– Anti-slip platform and treads, with lockable castors– Folds for transport and fits through standard doors– Conforms to Working at Height Regulations– 150kg work load capacity

code description platform height weight

LA3065 2-Tread Stable Steps 0.40m 5.7kg


LA3067 4-Tread Stable Steps 0.80m 12kg


Steps

code description height overall depth weight

LA3055 3-Tread Machine Steps – Single Sided

Platform 0.74mOverall 1.54m

0.72m 4kg



0.76m 5kg



0.90m 6kg

LA3058 3-Tread Machine Steps – Double Sided


1.00m 5kg



1.21m 6kg



1.42m 7.5kg

code description platform height overall height weight

LA3072 Podium 1 0.96m 1.83m 32kg

LA3073 Podium 2 1.20m 2.21m 37.5kg

LA3074 Podium 3 1.40m 2.43m 38.5kg

Machine Steps

features: – Aluminium platform steps - single or double-sided– Complete with handrail for additional security– Ideal access to machines or for maintenance etc– Heavy duty section with serrated non-slip treads– Constructed from heavy duty channel section aluminium– Additional option of 6 and 7 tread steps available upon request– 150kg work load capacity

Stable Steps

features: – Single sided fixed steps that provide stable and comfortable

access to a range of apparatus in industrial environments– Deep serrated non-slip treads– 500 x 250mm platform size– 150kg work load capacity

5-year

Warranty 5-year

Warranty

Lifetime

Warranty

Cargo Step

features: – Enables easy access to the bed of any goods vehicle – Single folding handrail for safe access on and off trailer– Complete with brackets and lock for secure vehicle storage– Step height adjusts to accommodate ground and load heights– Integral tie for securing to underside of vehicle– 150kg work load capacity

code description height overall height weight

LA3070 Cargo Step 1 Min 0.95mMax 1.17m

2.13m 7kg

LA3071 Cargo Step 2 Min 1.17m Max 1.40m

2.53m 8kg

5-year

WarrantyNote: No. of treads includes top platform

FOR

LADDER

CONDITION

CHECKING

SYSTEM

SEE PAGE 106

86 87

Ladder & Tower TrainingWe can provide accredited courses for ladder and tower training, endorsed by the Ladder Association and PASMA respectively

These practical courses are designed to provide candidates with a suitable insight into safe use and inspection of commercial ladders and associated low-level access products and scaffold towers

We offer two separate full day courses that can be carried out at our new training facility or on your own premises. For more details on our Ladder Training and Tower Training Courses, please contact us

As well as the access products listed on the previous pages, we offer a service where we can design and manufacture tailored bespoke access systems to specific customer requirements

These images represent some of our most recent projects. Contact our sales team with your requirements today


Specialist Access Solutions Plant Safety & Maintenance


Industrial – TankMate™ Access Platform Aerospace – Flip Top Maintenance Steps

Ministry of Defence – Typhoon Fighter Access Industrial – Stainless Steel Special Fabrications

code description

LA3150 LA Ladder Training Course (Up to 12 delegates)

LA3151 Registration, Certificate and ID (Per delegate)

LA3152 PASMA Tower Training Course (Up to 12 delegates)

LA3153 Registration, Certificate and ID (Per Delegate)

Specialist Access Solutions

Ladder Accessories &

Tower

Industrial Tower

features: – Our towers have a unique ladder frame construction

that combines increased strength and durability with the simplicity of a ladder

– The ladder, positioned within the frame, provides afoolproof, safe and quick access to the working platform

– Large trap door within working platform for easy access– Very heavy duty spigot and abuse resistant joints for

maximum strength and durability– Cross-bars have simple and safe brace hook assembly – Toe-board and guardrails for additional security– 5-Year Warranty– 750kg work load capacity– Other sizes and single width towers are also available

Ladders Accessories & Tower

code description height size w x l weight

LA3100 4.2m Double Industrial Tower


1.35m x 2.00m

175kg



1.35m x 2.00m

201kg



1.35m x 2.00m

250kg



1.35m x 2.00m

276kg

LA3104 12m Double Industrial Tower


1.35m x x2.00m

349kg

Ladder Protector

features: – Constructed from reinforced rubber– Provides superior grip on a range of

surfaces by increasing surface area– Helps compliance with safety legislation

Work Platform and Wingspan

features: – Use Wingspan for lateral stability and easier access– Comfortable standing platform or tool tray– Use with the Pro ladder

Ladder Guard

features: – Restricts unauthorised ladder access – Helps compliance with latest

Health and Safety legislation– Quick and easy to use, padlock included

Adjustable Leg Leveller

features: – Increased stability on uneven

surfaces or sloping ground– 280mm of adjustment– Use with the Pro ladder

code description

LA3095 Ladder Protector

code description

LA3098 Work Platform

LA3099 Wingspan

code description

LA3096 Ladder Guard

code description

LA3097 Adjustable Leg Leveller

88 89


Access Platforms

Optional Accessories for Access Platforms



Premium Access Platform

features: – Extra heavy duty access platform with very robust

construction and extra large working area– Conforms to HSE guidance note PM28-working

platforms on forklift trucks– Security system locks platform behind heel of forks– Rear wire mesh provides protection from crushing and

shearing points on the forklift truck– Anchorage points for attaching a safety harness– Fitted with self-closing access gate– Optional overhead guard available– Includes 5 x storage bins and tool tray with multiple

accessory fixing points– Max. capacity 300kg on a 1000kg truck or 800kg on 2000kg

truck (2 person)

code description size mm weight

AP3205 2 Person Premium Access Platform

1250 x 1250 x 2200 200kg

AP3206 Removable Overhead Guard

n/a n/a

Safety Harness

features: – Full body safety harness complete

with lanyard and karabiners– Use with Economy and Premium Access

Platforms

Tool Tray

features: – Ideal solution for keeping tools safe,

secure and ready for use whilst working– Use with Economy Platform only

Castors

features: – Two fixed and two swivel castor

wheel set (Supplied as set of 4)– Suitable for the Premium Access

Platform only

Tube Cradle

features: – Welded steel cradle for safe storage of

fluorescent tubes, when working at height– Use with Economy Platform only

Storage Bins

features: – Set of 3 plastic storage bins– Use with Economy Platform only– Included as standard on Premium

Access Platform

code description

AP3210 Safety Harness

code description

AP3213 Tool Tray

code description

AP3211 Castors

code description

AP3214 Tube Cradle

code description

AP3212 Storage Bins

Access Platform

s

Access Platform

s

Folding Access Platform3 - easy steps to erect features: – Special space saving access platform with fast and simple

folding mechanism– Unique folding design assembles in less than 30 seconds– Security system locks platform behind heel of forks– Available with two different base sizes for 1 or 2 operators– Castor wheels incorporated for easy transport– Rear wire mesh provides protection from crushing and

shearing points on the forklift truck– Max. capacity 400kg

Economy Access Platform features: – Cost effective, entry level solution for easy access to height

in the workplace– Ideal for non-routine maintenance– Security system locks platform behind heel of forks– Rear wire mesh provides protection from crushing and

shearing points on the forklift truck– Anchorage points for attaching a safety harness– Optional overhead guard, self-closing gate, storage bins,

tool tray and light tube cradle available– Max. capacity 400kg (2 person plus tools)

Access Platforms

code description size mm (folded) size mm (in use) weight

AP3200 1 Person Folding Access Platform

800 x 800 x 450

800 x 800 x 2100

78kg

AP3201 2 Person Folding Access Platform

1000 x 1000 x 270

1000 x 1000 x 1880

78kg

code description size mm weight

AP3202 2 Person Economy Access Platform

1000 x 1000 x2100 95kg

AP3203 2 Person Economy Access Platform c/w self-closing gate

1000 x 1000 x 2100 95kg

AP3204 Removable Overhead Guard n/a n/a

ALL MOBILE PLATFORMS CONFORM TO HSE GUIDANCE NOTE PM28-WORKING PLATFORMS ON FORKLIFT TRUCKS

Hanzl Ultra Hand Scrubber Wipes

Stay clean whilst working with our high quality Hanzl Ultra Hand Scrubber Wipes see page 155

1. 2.

3.

90 91


Barriers & Spray Paint Line Markers Plant Safety & Maintenance


Low Level BarriersHighly visible safety barriers, designed for creating protective barriers around racking, machinery and equipment and for defining walkways through industrial, manufacturing and warehouse sites

features: – Designed to protect racking and machinery etc from damage by

forklift or pallet trucks– Very strong fully welded construction from 80mm box section– Powder coated yellow– Supplied with floor fixings

Protective Posts

features: – Designed to protect building doorways from accidental damage– Fully welded construction for floor mounting – fixings included– Powder coated in yellow or black yellow


BA9027 Low Level Barrier – Yellow 400 x 300



BA9030 Low Level Barrier – Corner Protector – Yellow 300 x 300 x 300


BA9040 Protective Post – Yellow 115 x 915

BA9041 Protective Post – Black & Yellow 115 x 915

BA9042 Protective Post – Yellow 170 x 1100

BA9043 Protective Post – Black & Yellow 170 x 1100

Barriers & Spray Paint Line M

arkers

Barriers

code description size ml

LM9801 Black Line Marker Paint Tin 750

LM9802 White Line Marker Paint Tin 750

LM9803 Yellow Line Marker Paint Tin 750

LM9804 Red Line Marker Paint Tin 750

LM9805 Green Line Marker Paint Tin 750

LM9806 Blue Line Marker Paint Tin 750

code description

LM5002 2-Wheel Line Marker Applicator

LM5004 4-Wheel Line Marker Applicator

LM5006 Hand Held Line Marker ApplicatorYellow (Caution/Hazard)

White (General/Marking)

Red (Danger/Prohibited)

Green (Information/ Direction)

Blue (Mandatory/Protection)

Black (Deletes existing lines)

Y

W

R BL

B

G

Spray Paint Line Markers

features: – Excellent solution for marking out car parks, defining walkways

in warehouses and factories and many other applications– Helps you to comply with health and safety requirements and

streamline operations– Each can gives approximately 75 – 100m of 50mm line coverage paint colours available and recommended application

Line Marking Applicators

features: – Help to ensure accuracy and clear line definition when spraying– Sturdy yet lightweight construction, 2 or 4-wheeled option– Easy trigger activation with a range of line width settings

Barriers

Fully Welded BarriersHighly visible safety barriers, designed for creating permanent protective barriers around machinery and equipment and for defining walkways at industrial, manufacturing and warehouse sites

features: – Modular design at either 900 or 1100mm tall – Choice of open or steel mesh infill panels– Fully welded steel box section construction– Powder coated with high visibility yellow coating– Easy to assemble and supplied with floor fixings

Lift Out Rail BarriersHighly visible safety barriers, designed for creating moveable protective barriers around machinery and equipment and for defining walkways at industrial, manufacturing and warehouse sites

features: – Modular design at either 900 or 1100mm tall with easily

removable rails to allow access if required– Constructed from tough mild steel box section– Easy to assemble and supplied with floor fixings– Powder coated with high visibility yellow coating– Single rail barrier (500mm high) also available

how to choose your Barrier Rail– Decide what barrier height you want (900 or 1100mm) – Select the correct number of barrier posts you need (End,

Corner, Standard) – Finally select the barrier lengths that you require


BA9001 Straight Barrier Unit – Open Panel 1200 x 900




BA9008 Corner Barrier Unit – Open Panel 1200 x 900

BA9009 Corner Barrier Unit – Open Panel 1200 x 1100

BA9010 Gate Barrier Unit – Open Panel 900 x 900




BA9040 Straight Barrier Unit – Mesh Panel 1200 x 900




BA9044 Corner Barrier Unit – Mesh Panel 1200 x 900

BA9045 Corner Barrier Unit – Mesh Panel 1200 x 1100

BA9046 Gate Barrier Unit – Mesh Panel 900 x 900





BA9015 Lift Out Twin Rail Barrier – End Post 800 x 800 x 900

BA9016 Lift Out Twin Rail Barrier – End Post 800 x 800 x 1100

BA9017 Lift Out Twin Rail Barrier – Standard Post 800 x 800 x 900

BA9018 Lift Out Twin Rail Barrier – Standard Post 800 x 800 x 1100

BA9019 Lift Out Twin Rail Barrier – Corner Post 800 x 800 x 900

BA9020 Lift Out Twin Rail Barrier – Corner Post 800 x 800 x 1100

BA9021 Lift Out Barrier Rail 300





FOR

BOLLARDS

SEE PAGE 134

FOR

FLOOR PAINT

SEE PAGE 88

92 93


Manual Handling Plant Safety & Maintenance


Drum Handling

General Purpose Trolleys

features: – Heavy duty trolley is ideal for the transfer of boxes, tools

and equipment around the workplace– Welded tubular and flat steel chassis frame– Plywood shelves are polyurethane coated with

20mm raised hardwood edge– All steelwork is finished in blue epoxy– Standard design 125mm dia. rubber wheels (2 swivel and 2 fixed)– Version available with lockable steel cabinet (c/w shelf)

Three–in–One Drum Carrier

features: – For transport and dispensing from 210L steel or plastic drums– Simple lever action lifts drum for transportation– Further movement of lever allows drum to be rotated through 360o

– Drum is held securely in 200mm wide steel girdle harness with two ratchet clamps, with height adjustment

– Fitted with solid rubber wheels and braked castor– Maximum capacity 360kg

Drum Trucks

features: – For easy transport of 210L steel drums– Standard 2-wheel, with rear bar support– 4-wheel option, with rear swivel castors also available.

Helps user to move and manoeuvre loaded truck– Tubular steel section with sliding drum retention clamp– Red plastic standard hand grips on handles– With solid tyres – 400mm dia– Maximum capacity 300kg

Drum Transporter and Dispensing Stand

features: – For transporting and dispensing from 210L steel drums– Welded steel construction– Removable 2-position handle– 4 nylon drum rollers – to help rotate drums easily and safely– Wheels: 2 x 400mm dia and 2 x 160mm dia castors– Strap to secure drum is supplied– Maximum capacity 350kg

Pallet Loading Drum Truck

features: – Designed to assist loading and unloading of

210L drums onto pallets or platforms– With sliding drum retention clamp– Optional extra clamp for plastic drums available– Twin loop handles for easy and safe movement of drums– Wheels: 2 x 250mm dia and 2 x 200mm dia, with roller

bearings and solid rubber tyres– Maximum capacity 300kg

Maintenance TrolleysIn addition to the features listed for the General Purpose Trolleys:

features: – Steel shelves with 25mm raised edge– With two lockable drawers (supplied with two keys)– Ideal for maintenance and facilities workers that need to take valuable tools or equipment around the site

Multi-Purpose Platform Trucks

features: – Substantial plywood deck– Blue epoxy finished steel frame with zinc plated

mesh infill end and side panels– All sides and panels are removable– Standard design 125mm dia. rubber wheels (2 swivel and 2 fixed)

code description size mm tiers

TR8701 Trolley – 2 Shelves 620 x 1160 x 1045 2

TR8702 Trolley – 3 Shelves 620 x 1160 x 1045 3

TR8703 Trolley – Steel cabinet, 3 Shelves 620 x 1160 x 1045 3


TR8710 Platform Truck – single ended 700 x 1000 x 985 1

TR8711 Platform Truck – double ended 700 x 1000 x 985 1

TR8712 Platform Truck – 3 sided 700 x 1000 x 985 1

TR8713 Platform Truck – 4 sided 700 x 1000 x 985 1 code description size mm tiers

TR8717 Super HD Truck – MDF Deck 750 x 1500 x 500 1

TR8718 Super HD Truck – Steel Deck 750 x 1500 x 500 1

TR8719 End and Side Panel Kit 200 (high) n/a

TR8729 Parking Break n/a n/a


TR8707 Maintenance Trolley – 2 Steel Shelves

620 x 1160 x 1045 2

Super HD Truck

features: – Super strong and robust trolley for heavy duty usage– Option of MDF or steel deck– Fully welded construction from rectangular and round

section steel tube– Metalwork finished in red epoxy paint– Highly durable, solid rubber 400mm dia. tyres – Loop handle for easy manoeuvring– Optional light grey sides and parking brake also available– Weight capacity: 750kg


TR8720 Three-in-One Drum Carrier 895 x 1280 x 1030


TR8722 Drum Trucks – 2-wheel 660 x 600 x 1500

TR8723 Drum Trucks – 4-wheel 660 x 600 x 1500


TR8721 Drum Transporter 780 x 1250


TR8724 Pallet Loading Drum Truck 610 x 1660 x 1100

Drum

Handling

Manual H

andling

94 95


Drum Handling Plant Safety & Maintenance


Manual Handling

Drum Up-Down Ender

features: – For up-ending and down-ending 210L

steel drums– Wide twin tubular handle with plastic

plastic handle grips– With cross member and rim hook

Tall Cylinder Support Truck

features: – 3-wheel base for easy movement– Helps to minimise operator fatigue and risk– Adjustable back rake and easy-load plate– Rear swivel caster wheel (125mm dia)– Front 200mm dia wheels with roller

bearings– For cylinders with dia of 230mm or 275mm

Three Position Convertible Sack Truck

features: – Super heavy duty construction– Multi-purpose – use as a sack truck or

4-wheel transporter or a platform truck– Rectangular section and round tube– Wheels: 200mm dia solid rubber tyre wheels– Rear castors: 125mm dia swivel castors

with rubber tyres and roller bearings– Capacity: 400kg

Mobile Steel Drum Stand

features: – Welded steel construction– With tilt lever and drum rotation rollers– 2 fixed outrigger wheels and 2 swivel

castor wheels– Optional hook-on steel drip tray available – Version for plastic drums also available– Capacity: 250kg

Gas Cylinder Truck

features: – Designed for transport of cylinders

380 Dia. x 1250mm– Twin rear handles– Solid footplate and vertical side tubes

with cylinder retention chain– Solid tyre wheels: 200mm dia

Heavy Duty Pallet Trucks

features: – Designed for heavy duty industrial use– 3 position control lever with comfortable grip, plastic handle– Tapered forks, lift height 85 – 200mm– Nylon steer and load wheels – Capacity: 2500kg (3000, 4000, 5000kg capacities also available)

Pallet Truck Wheel and Brake Options – POA

– Foot brake for locking whist parked (includes rubber steer wheels)– Hand brake for braking whilst on the move (includes rubber

steer wheels)– Polyurethane steer wheels and tandem polyurethane load rollers

Super Drum Dolly

features: – Immensely strong steel fabricated

construction– 4 nylon 80mm wheels in ball bearing

swivel castors – Capacity: 500kg

Sack Trucks

features: – Heavy duty, original splay-back design

meets the toughest demands in industry– Manufactured from tough welded angle

and tube, with a one piece toe iron– 200mm dia solid rubber wheels with

roller bearings– Capacity: 200kg

Rough Terrain Pallet Truck

features: – Heavy duty pallet truck especially designed for use

on rough and uneven ground– Ultra strong streel construction– Easy handling and great manoeuvrability– Hydraulic fork lift with inbuilt hand pump and

adjustable width over forks– With sealed bearings and pneumatic tyres– Ideal for recycling centres, construction sites and general industry– Use on sites where ordinary pallet trucks or forklifts cannot be

used due to rough ground conditions– Capacity: 1500kg

Manual Drum Tongs

features: – For lifting 210L open top and tight head

steel drums with L or XL rings– Welded grip hooks– Fitted with 20mm dia steel pin for

attaching to overhead lifting gear or forklift adaptor beam

– Capacity: 360kg


MH8800 Drum Up-Down Ender

250 x 1725


MH8801 Manual Drum Tongs

360kg


MH8802 Horizontal Drum Tongs

500kg


TR8732 Super Drum Dolly

61 dia

Horizontal Drum Tongs

features: – For lifting 210L tight head steel drums, – Use with overhead lifting gear or fork

mounted swivel hook– Tongs automatically engage as drum is

lifted, and automatically released when drum is set down

– Capacity: 500kg


TR8730 Mobile Drum Stand

725 x 880 x 580

TR8731 Hook-on Steel Drip Tray

n/a


TR8735 Gas Cylinder Truck

580 x 400 x 1250

code cylinder size mm size mm

TR8733 230 430 x 1140

TR8734 275 475 x 1140

code size mm

TR8738 480 x 585 x 1250

code size mm foot plate size mm

TR8736 635 x 1170 355 x 230

TR8737 635 x 1170 355 x 305

Manual H

andling

Drum

Handling

code description fork length mm fork width mm

TR8745 HD Pallet Truck 1000 540




code description fork length mm fork width

TR8740 RT Pallet Truck 820 320-660

FOR FORK

MOUNTED DRUM

HANDLERS

SEE PAGE 101

96 97




Manual Handling

Roll Forward Skips

features: – Ideal for strategically placing in production or storage areas– Help to keep working areas clear and floors free of any trip hazards– Safe and speedy removal of scrap or recycling waste– Unique twin locks and a simple-to-operate release mechanism– Safety chain to ensure skips stay on the truck forks– Skip bodies are made from 3mm steel plate– Heavy duty version also available – 5mm steel plate– Colour – standard colour is yellow. Red, green or blue are

also available

Additional Options – contact us for prices– Auto release – a special ‘nudge’ bar at the front of the skip,

activates the standard release handle to empty the contents– Lid – fully fitted lid to help prevent waste blowing about and

reduce odours. Front of lid folds back over the fixed rear portion– Standard castors – 100mm dia nylon, 2 fixed, 2 swivel– Braked castors – 100mm dia nylon, 2 fixed, 2 braked swivel– Heavy duty castors – 100mm dia cast iron, 2 fixed, 2 swivel– Heavy duty braked castors – 100mm dia cast iron, 2 fixed, 2

braked swivel– Lifting lugs – set of 4 allowing skip to be lifted by crane– Fork clamps – clamp skips onto forks– Auto retention – Locks and unlocks skip to fork automatically– Drain tap – Protected drain tap in base for draining liquids

When ordering skips please specify: – Product to be handled and capacity of truck– Fork width, thickness and spread– Type of working environment– Ensure you check the dimensions of the skip prior to ordering

Packaging Skip

features: – Same benefits as the roll forward skips above– Additional 500mm mesh height extension on three sides– Allows for the collection of higher volumes and adds rigidity– Ideal for high volume, light material (paper and cardboard etc.)

Please see below for a comparison between our skips and standard 240L household wheelie bins

Bottom-Emptying Skip

features: – Automatic bottom-emptying release mechanism, means fork

truck driver can empty skip without leaving their seat– Simple and effective disposal of light to medium weight waste– Fitted with castors. Ensures the skip is simple and easy to move– Fork guides to simplify unloading and with zinc plated heel pins

for safe attachment to truck. Open top for fast loading

Small Wheeled Bin Handler

features: – A unique attachment which allows wheeled bins to be picked

up and emptied into a skip or container– The bin is picked up via the rear handles. A pull cord is attached

to the bin wheel and is used to rotate and empty the bin– The winch mechanism can be mounted to the left or right

depending on the offset of the fork truck seat– Suitable for use with 90 – 240L wheeled bins and light waste

1100L Wheeled Bin Handler and Rotator

features: – Simple lifting and emptying of 1100L or 600L wheeled bins– Ensures loaded bins can be moved around site quickly and safely– Fork-heel pins to ensure the handler is retained to the forks– Only suitable for use with large wheeled bins with side trunnions– Rotator version also available for 1100L flat lid bins. Allows bins

to be lifted and rotated forwards at any height

Fork Mounted Hooks

features: – Use your forklift as a mini mobile crane – Fitted with forged steel shackle with a swivel hook– Suitable for use with drum handling attachments – Zinc heal pins for safe attachment to truck– With two fixed lifting points along the fork blade on HD model– Slimline (SL) adjustable version available, enables lifting

anywhere along the length of the forks

code description size mm volume capacity

MH8810 Roll Forward Skip 794 x 1148 x 678 0.25m3 1000kg

MH8811 Heavy Duty Roll Forward Skip

794 x1148 x 678 0.25m3 1000kg



794 x 1410 x 781 0.40m3 1000kg



1300 x 1480 x 834 0.80m3 1000kg



1300 x 1710 x 985 1.20m3 1250kg



1700 x 1710 x 985 1.60m3 1500kg



2125 x 1710 x 985 2.00m3 1500kg


MH8880 Bottom–Emptying Skip

1050 x 850 x 900 0.80m3 550kg


1200 x 1050 x 900 1.20m3 750kg


1500 x 1050 x 900 1.45m3 950kg

code description capacity bin type

MH8883 Wheeled Bin Handler 500kg 1100L Flat Lid

MH8884 Wheeled Bin Handler 500kg 1100L Sprung Lid

MH8885 Wheeled Bin Rotator (Crank Handle)

500kg 1100L Flat Lid

MH8886 Wheeled Bin Rotator (Loop Chain)

500kg 1100L Flat Lid

code description capacity fork pockets mm

MH8888 HD Fork Mounted Hook 1000kg 150x50




MH8892 SL Adjustable Fork Mounted Hook

500kg 125x40


1000kg 135x50


2000kg 150x75


MH8860 Roll Forward Packaging Skip

1300 x 1480 x 834 1.40m3 1000kg


1300 x 1710 x 985 1.90m3 1250kg


1700 x 1710 x 985 2.50m3 1500kg


MH8887 Small Wheeled Bin Handler 200kg

Manual H

andling

Material H

andling

0.25m3 =

0.40m3 =

0.80m3 =

1.20m3 =

1.60m3 =

2.00m3 =

(1 x 240L)

(1.7 x 240L)

(3.3 x 240L)

(5 x 240L)

(6.7 x 240L)

(8.3 x 240L)

Bin Handler Bin Rotator

HD Hook SL Adjustable HookAuto release

Auto retention

Drain Tap

98 99

code description capacity at load centre500mm 1750mm 3000mm

MH8905 Fork Mounted Jib 1000kg 300kg n/a



MH8911 Extending Jib 1000kg 300kg 200kg



code description max fork size capacity type operation

MH8940 HD Drum Rotator

165 x 50mm 360kg 1 Crank Handle

MH8942 SW Sideways Drum Rotator

140 x 50mm 360kg 1 Crank Handle

MH8943 SW Sideways Drum Rotator

140 x 50mm 360kg 1 Loop Chain

code description max fork size capacity no. drums type

MH8945 Drum Grab ST 140 x 50mm 500kg 1 1

MH8946 Double Drum Grab ST

140 x 50mm 1000kg 2 1

MH8947 Drum Grab SP 140 x 50mm 500kg 1 1, 2

MH8948 Double Drum Grab SP

140 x 50mm 1000kg 2 1, 2


MH8950 Drum Tines 170x50mm 500kg 1 1


Manual Handling



Manual Handling

Low Profile Jib

features: – Ideal for areas where height is limited– Move long and awkward loads from inaccessible locations– Five different lifting centres – for multi-hook positioning– Supplied with swivel hook and shackle– Four way pocket entry for ease of storage– Extending version available – with 10 different lifting

positions and two hooks to 'cradle' your load– Capacities up to 4000kg are available

Fork Mounted Load-lifter

features: – Specifically designed for the safe loading and unloading of roll

cages and pallets etc onto and from articulated vehicles– With lowerable ladder for safe access for personnel– Rubber buffered wings to limit entry and damage to rear of vehicle– Supplied with retention rope to minimise cage movement

Fork Extensions

features: – Simple and effective method of handling long and awkward

loads that extend past the tips of the parent forks– Fully pressed profile with rounded corners– Zinc plated heel pins for safe attachment to truck– Please specify parent fork arm width, thickness and length– Many other size options available

Fork Mounted Jib

features: – For applications where maximum capacity is critical– Move long and awkward loads from inaccessible locations– Five different lifting centres – for multi-hook positioning– Supplied with swivel hook and shackle– Extending version available – with 9 different lifting

positions and two hooks to 'cradle' your load– Capacities up to 4000kg are available

code description capacity at load centre

500mm 1750mm 3000mm

MH8895 Low Profile Jib 1000kg 250kg n/a

MH8897 Low Profile Jib 2000kg 600kg n/a

MH8900 Extending Low Profile Jib 1000kg 250kg 100kg

MH8902 Extending Low Profile Jib 2000kg 600kg 200kg

code description capacity base size mm

MH8916 Fork Mounted Load-lifter 1000kg 1900 x 1500

code description max fork size mm length mm

MH8920 Fork Extensions 100 x 50 1525






Different Drum Types

which drum handler fork attachment do I use? – On the right is a guide to the different drum types, which are

numbered – look out for the numbers next to each drum handler fork attachment, so that you can choose the correct handler for the drums you store on your site

Fork Mounted Drum Rotators

features: – Fully rotates drums through 360o

– Ideal attachment for narrow-aisle operation– Drum held securely in 200mm wide steel girdle harness

with ratchet strap clamps– Sideways (SW) rotation version also available (for steel drums

only – type 1) – Rotation is carried out by means of a crank handle (option

of continuous loop chain also available for sideways rotation version)

Fork Mounted Drum Tines

features: – For transporting 210L drums horizontally– Stacks and un-stacks drums stored horizontally– Fits onto forks and is secured by clamping screws

Fork Mounted Drum Grabs

features: – Ideal for low to medium volume movement of drums – Fully automatic operation and very simple to use– Fits onto forks and is secured by clamping screws– Two different drum grabs available; – Version for use with steel 210L drums only (ST) – Version for use with both steel and plastic 210L drums (SP)

Steel 'L' Ring Plastic

DIFFERENT DRUM TYPES SHOWN RELATE TO THE FOLLOWING PRODUCTS ON PAGES 101 AND 102

Manual H

andling

Manual H

andling

1 2

HD Model

SW Model

SP Model

ST Model

100 101

The unique modular brush system that is extremely efficient and economical for all commercial sweeping!

Turn over for more...


MH8952 Drum Positioner – 3 Tines

140 x 50mm 400kg 1 1, 2

MH8953 Drum Positioner – 4 Tines

140 x 50mm 400kg 1 1, 2


MH8955 Rim Grip Drum Handler

140 x 50mm 750kg 1 1, 2

MH8956 Rim Grip Drum Handler

140 x 50mm 1500kg 2 1, 2




Fork Mounted Drum Positioner

features: – A unique means of manipulating drums from horizontal to

vertical and vice-versa, without leaving the seat of the fork truck– Completely mechanical in operation– Can be used to transport drums and for loading and unloading

vehicles, drum storage racks etc– Suitable for use with 210L drums of steel and ‘L’ ring or ‘XL’ ring

plastic types– Available with 3 or 4 tines – 4 tine version allows drums to be stacked in racking where

clearance above drums is minimal. It also allows 4 drums to be placed on or removed from a pallet easily.

Fork Mounted Fixed Snow Plough

features: – An invaluable asset for clearing fresh or compacted snow – Helps to keep your workplace and staff safe and helps to

ease access for vehicles and pedestrians– Great as a yard scraper during the Autumn/Winter months– With steel wear-strip along the bottom of the blade– Optional rubber blade insert available for bottom of blade

Fork Mounted Sprung Loaded Snow Plough

features: – Ideal for clearing areas where hidden objects are likely to be

encountered.– Spring loaded blade minimises damage to the plough and to

objects such as manhole or drain covers etc– Simple adjustment allows the plough to sweep left, right or

straight ahead– Castor wheels and rubber blade inserts are fitted as standard

Fork Mounted Rim Grip Drum Handler

features: – Ideal for handling drums that are packed tightly together– Steel jaws grip the rim of the drum, allowing the drums to

be picked up or set down without spaces between them– Made with a mild steel frame and a zinc plated head– Suitable for use with 210L drums of steel and ‘L’ ring or ‘XL’ ring

plastic types– Rubber cushioned support base available, which helps to reduce

damage to drums – POA– Please specify drum diameter and type, fork width and thickness

when ordering

code description max fork size blade width

MH8960 Fixed Snow Plough 150 x 45mm 1220mm

MH8961 Fixed Snow Plough 150 x 45mm 1500mm

code description max fork size blade width

MH8965 Sprung Loaded Snow Plough

150 x 45mm 1525mm

MH8966 Sprung Loaded Snow Plough

150 x 45mm 2130mm

UniSweep™ Super Brooms

Why UniSweep™….?– Do you want to keep your premises clean and tidy?– Are you concerned about Health and Safety – especially slips and trips?– Do you have limited free time?

UniSweep™ is the solution for you…!

benefits– Simple and effective – an efficient sweeping solution– Tackles bulky materials with ease– Generates minimal dust and will ‘squeegee’ wet surfaces– Highly durable with impressive track record of quality– Safe and maintenance-free– Attaches quickly and simply to your fork truck– Sweep up to 450 miles before changing bristles!– Uni-Sweep™ has been proven to reduce labour costs by 98%!!– No moving parts, no belts or chains, no motors, no downtime – no problem!!

features– Unique easy change brush system that can be completed in just 5 minutes!– All UniSweep™ brooms feature a high-tensile steel broom head and mounting hardware– Heavy-duty, powder coated white finish

Application Areas Waste recycling centres Warehouse and freight distribution terminals Docks, rail yards and airports Car parks Street cleaning Concrete plants Saw mills Vehicle breakers Snow clearance Construction sites

Types of Soiling Soil/clayLeavesDebrisLight snowMaterial spillsSludge/mud/slurryStanding waterWood chips /pallet scrapsAbsorbent granulesSteel swarf, nails and screws

UniSw

eep™ Super Broom

s

Manual H

andling

Mega Broom

Pro Broom

UNISWEEP™ SUPER BROOMS

102 103


UniSweep™ Super Brooms Plant Safety & Maintenance


Two Models Available

Pro BroomDesigned for medium to heavy sweeping, the Pro range brooms have eight bristle rows, suitable for industrial sweeping indoors and outdoors, with integral fork mount hitch. Two broom size options available

Mega BroomSuper heavy duty sweeper with eleven bristle rows for maximum sweeping power – suitable for the toughest sweeping environments. Three broom size and three hitch options available

Three Hitch Options for Mega Broom

1. Fork HitchFits most standard fork tines utilising chain securing system (Dimensions: 900 x 600mm)

2. Fork Sleeve HitchAccepts most standard fork tines using simple pin latch system (Dimensions: 1070 x 600mm)

3. Oversize Fork Sleeve HitchFor 6” x 2” / 150 x 50mm forks (Dimensions: 1070 x 900mm)

Heavy Duty Magnetic Bar – Suitable for Mega and Pro BroomsFor the removal of nails and dangerous debris – Helps prevent punctures and saves down time

BigSweep™The low cost, lightweight yet high performance broom – ideally suited to light duty applications. Safe, reliable and versatile – the warehouse essential!

features:– Durable and effective in a wide range of environments– Simple and easy to fit into fork pockets– Quick and easy replacement of individual brush strips

reduces running costs– Optional magnetic bar also available

code description brush (w x h) mm rows weight

US9700 UniSweep™ Pro Broom 1.52m x 280 8 67kg

US9701 UniSweep™ Pro Broom 1.83m x 280 8 79kg

US9705 UniSweep™ Mega Broom 1.52m x 280 11 94kg



US9710 Fork Hitch – Mega Broom n/a n/a 24kg

US9711 Fork Sleeve Hitch – Mega Broom

n/a n/a 64kg

US9712 Oversize Fork Sleeve Hitch – Mega Broom

n/a n/a 68kg

US9713 Heavy Duty Magnetic Bar 1.20m n/a 24kg



code description brush (w x h) mm rows weight

US9720 BigSweep™ Broom 1.22m x 200 5 20kg

US9721 BigSweep™ Broom 1.52m x 200 5 23kg

US9722 Magnetic Bar 1.20m n/a 14kg

US9723 Magnetic Bar 1.52m n/a 17kg

Fork hitch

Heavy duty magnetic bar

Big Sweep

Easy brush replacement

Quick – Tite fork pockets

Fork sleeve hitch

Oversize fork sleeve hitch

Safety Signs

Uni-Sw

eep™ Super Broom

s

Safety Signs

Our NEW 2011 Safety Signs Catalogue is available nowWe offer a vast range of safety signs to help you comply with latest standards and legislation and maintain your premises as a safe place to work

Some areas we cover are:– Fire Signs– Emergency Escape Signs– Photoluminescent Signs– First Aid Signs– Environmental Signs– Prohibition Signs– Security Signs– Warning Signs– Mandatory Signs– Office Signs– Multi-Lingual Signs– Custom Made Signs– Posters and Displays– Warehouse and Factory Signs

Are the safety signs in your workplace compliant with new ISO 7010 standards?

All workplaces will be required to implement and display the new graphical symbols for safety communication signs, under the latest European standard (ISO 7010)

PLEASE CONTACT US TO REQUEST A FREE COPY OF OUR SIGNS CATALOGUE

104 105




Good-to-G

o System

Good-to-G

o System

Safe Equipment Management System

Good-to-Go Safety tag system offers a simple, effective and affordable solution to equipment safety. Allows competent inspectors to carry out regular checks and clearly communicate the findings to all employees. It is flexible to meet your needs; buy as individual components or in kit format dependent on the frequency of your inspections

can help companies to:– Comply with legislation and industry best practice– Prevent accidents and maximise safety– Educate staff and improve morale– Improve business performance– Reduce operating costs– Provide an indexed audit trail– Quarantine faulty equipment

Simply fix the status tag to the appropriate equipment to visually inform employees of its current status. Use a check book to carry out a comprehensive inspection and insert the completed checklist into the tag (a duplicate copy is retained in the check book for management records). Attach a tamper evident seal to deter and identify unauthorised access

code description

51301 Status Tag

code description

51308 Check Book Wallet & Pen

code description

51307 Tamper Evident Seals

Good-to-Go System

Status Tag

features: – Manufactured from tough, weatherproof

and highly visible polypropylene– Channeled base allows the tag to sit

flush to poles – easily secured with cable-ties, screws or adhesive

– Warning label is clearly displayed if the checklist insert is missing

Weekly Inspection KitsProvides everything you need to carry out an entire year of weekly inspections

features: – 1 x Status tag– 100 x Tamper evident seals– 2 x Check books (50 inspections)– 1 x Check book wallet and pen

Daily Inspection KitsProvides everything you need to carry out an entire year of daily inspections (based on a 5 day working week)

features: – 2 x Status tags– 300 x Tamper evident seals– 11 x Check books (275 inspections)– 1 x Check book wallet and pen

Check Books

features: – 25 individual inspections with unique

sequential numbering– A carbon copy is automatically retained

upon completion of checklist– A useful check book wallet and pen is

also available for storage– See page 107 for different check books

Tamper Evident Seals

features: – Manufactured from high visibility red

polypropylene.– If the seal is missing then a new

checklist should be completed and a new seal inserted to validate the inspection

– Supplied in a box of 100

Good-to-Go System

Scaffold TowerProvides essential safety checks prior to using the tower whilst ensuring the current results of the inspection are recorded anddisplayed

ForkliftsPUWER, LOLER and the FTA (Forklift Truck Association) all demand that any businessoperating forklift trucks must carry out frequent inspections

RackingFrequent racking checks can help identify any damaged bays resulting from unreported forklift collisions. Also helps to identify any unstable loads or damaged pallets before an incident occurs

LaddersWith over 14 deaths and 1200 major injuries to workers each year, resulting from accidents on ladders, the need forregular inspections is essential. Designed for use on industrial ladders and stepladders

HarnessAllows the quick and easy inspection and tagging of harnesses as specified inWAHR, BSEN365:2004 and BS8437. Checks should be carried out before eachharness use - it should be a visual and tactile examination

Fixed ScaffoldingAllows scaffold status to be instantly updated following any structural alterations and bad weather. The tag sits flush to the tube, preventing risk of snagging or breakage. Designed to BSEN12811-1 and TG20:08 guidance

BespokeFor equipment not covered by the standard Good to Go Safety range. Allows you to design your own checklist. A low cost and effective solution for more specialist equipment. PUWER stipulates the need for ALL work equipment to be suitable and safely maintained

MEWP'sUnder Work at Height Regulations (WAHR) the use of MEWPs is more widespread than ever. This system works with most versions of cherry pickers, telescopic booms and scissor lifts

Helps to meet your duties under PUWER, LOLER, SEMA, WAHR and HSE guidance: simply choose from the list of applications below:

The easy way to ensure your workplace equipment is always Good-to-Go

code description

51317 Check Book

code description

51303 Check Book

51310 Weekly Kit

51314 Daily Kit

code description

51322 Check Book

51323 Weekly Kit

51324 Daily Kit

code description

51319 Check Book

51320 Weekly Kit

51321 Daily Kit

code description

51304 Check Book

51311 Weekly Kit

51315 Daily Kit

code description

51302 Check Book

51309 Weekly Kit

51313 Daily Kit

code description

51305 Check Book

51312 Weekly Kit

51316 Daily Kit

code description

51325 Check Book

51326 Weekly Kit

51327 Daily Kit

Tag it Record itCheck it Secure it You're Good to Go

106 107


Ratchet Straps & Applicator Plant Safety & Maintenance


Industrial Lubricants

Heavy Duty Ratchet Strap Assemblies

features: – High quality double locking, wide handle ratchet and claw hook

end fittings– Extra long handle ensures easy operation and more leverage– Soft rubber hand-grip with finger indents for positive grasp– High tenacity polyester webbing– Load capacity: 2,000kg– Break strain: 4,000kg– Dimensions: 50mm wide x 8m or 10m long– Lashings meet the requirements of and conform

to BS EN12195-2

Heavy Duty Wheel Chock

features: – Keep your stationary lorries and vehicles safe– Help to comply with ADR regulations (see 8.1.5 of current ADR)– Strong and durable. High visibility yellow– Suitable for wheel sizes up to dia of 920mm and above– Plastic holder for chock also available

Ratchet Strap Applicator

features: – Helps to save your company time and money. Reduces a

two man, 40 min loading job to a one man job that can be completed in just 7.5 mins!

– Eliminates the need to work at height whilst securing load, using a telescopic pole

– Helps to save lives, avoid injury and costly insurance claims– Can be used to untwist straps and retrieve straps that have fallen

between loads– Applies and removes edge protectors (great for multiple drops)– Use with any type of edge protector and strap from any country– Store easily in a drivers cab for multiple drops, loading and

unloading can be carried out by one operative


RS2000 Heavy Duty Lashing 50mm x 8m

RS5000 Heavy Duty Lashing 50mm x 10m

code description

WC2010 Plastic Wheel Chock

WC2011 Plastic Chock Holder

code description

RS5080 Ratchet Strap Applicator

Chain and Wire LubricantHelps to prevent corrosion, wear and chain elongation, this heavy-duty chain lubricant extends the life of your chains and wire ropes. It gives outstanding performance under extreme conditions of load and does not fling off

Drive and Bearing LubricantMaintain your drive chains and bearings with the targeted action of this specialist lubricant. Containing extreme-pressure and anti-fling additives, this lubricant enhances chain life and can be used at a wide range of temperatures

code size

LU9905 400ml

code size

LU9906 400ml

White Grease – with PTFEA premium-quality, water-resistant grease that provides highly effective lubrication in areas of high moisture. Ideal for use in anti-friction and plain bearing pumping equipment, and for the lubrication of most moving or stationary parts

code size

LU9907 400ml

WD Anti-Rust AgentThis WD spray actively drives out moisture even in difficult-to-reach areas, leaving a fine protective film which also lubricates. Making light work of maintenance and future dismantling of equipment, you can also use it for both cleaning and degreasing

Silicone LubricantThis lubricant provides you with a clean, low odour and non-staining lubricant for most applications around the workplace, especially on plastic parts and seals. Its non-toxic characteristics make it suitable for use where incidental food contact is possible

code size

LU9901 400ml

code size

LU9902 400ml

Super Lube XPSpecially formulated for lubrication of glide rollers in both steel and aluminium tracking, this excellent lubricant can also be used to give lasting lubrication and protection against moisture and corrosion in all manner of applications around the workplace

Graphite Penetrating OilThis performance-enhanced graphite oil is exceptionally penetrating and is very effective on items that have seized through corrosion. The graphite leaves a lasting lubricant which withstands more arduous conditions than other oils

code size

LU9904 400ml

code size

LU9903 400ml

High Quality Industrial LubricantsOur range of appropriate lubricants provide targeted lubrication that is highly effective and help ensure maximum performance. All products are in 400ml spray tins and are supplied in packs of 12.

Industrial Lubricants

Ratchet Straps & A

pplicator

108 109


Lubricants & Cleaners Plant Safety & Maintenance


Food & Drink Processing Lubricants

Belt Dressing – Anti-SlipBoost transmitted power by up to 50% and significantly reduce slippage on all ‘V’, flat, and round belts with this high-performance tacky spray. Increasing belt life and reducing energy costs, helps to improve your efficiency and reduce your manufacturing costs

Clear GreaseUse this high-performance lubricant on chains and other moving metal parts. It penetrates rapidly before thickening to tenacious grease, which is highly resistant to throw-off, and the addition of extreme-pressure additives makes it particularly effective under high loads

Industrial Cleaner – Fast-DryingUse this specially formulated solvent cleaner to break down all types of workshop contamination quickly and easily. It removes grease, dirt and oil from most surfaces without the need for subsequent rinsing, saving valuable time and maintaining a clean environment

Premier Precision LubricantsThese special lubricants provide targeted action to specific applications and have been developed with professionals in mind. These Precision lubricants ensure smooth-flowing processes and uninterrupted output. If you need the very best then here it is!

Highly Effective Industrial Cleaners

Looz-N-It PenetrantThe powerful targeted action of this penetrating oil will release and lubricate any metal components that have seized through corrosion; and remains effective even under water

WD PowerThis professional WD spray provides superior moisture displacement, and is so effective that it will actually displace other leading brands of WD spray. It is an excellent lubricant and leaves a fine film that protects against rust and corrosion for up to 2 years for indoor storage

Sticky Label RemoverNeatly remove the stickiest paper labels from most plastic, painted, metal and other hard surfaces with this particularly effective spray. Leaves no residue or marking. Makes labelling and re-labelling of areas around the workplace a simple task

Graffiti RemoverWipe out the marks left by vandals quickly and easily with this specially formulated solvent cleaner. It is highly effective in removing graffiti from plastics, laminates, wood, metal, glass, vinyl, and plastic seating, as well as most painted surfaces

code size

LU9909 400ml

code size

LU9908 400ml

code size

LU9933 400ml

code size

LU9961 400ml

code size

LU9962 400ml

code size

LU9931 400ml

code size

LU9932 400ml

Eez-It Penetrating & Release FluidPenetrating and release fluid with anti-corrosion additives which actively penetrates seized components. A residual lubricating film adheres to the released part, facilitating re-assembly and helping to prevent further corrosion

Water Displacement SprayA water displacement fluid with added PTFE which effectively displaces moisture and water based fluids from most surfaces whilst leaving a residual film of lubrication. With CO2 propellant for reduced flammability

Stainless Steel CleanerIndustrial grade cleaner and polish for use on metal surfaces which leaves a durable protective coating resisting marks and dirt. Cleans and polishes in one action without leaving scratches. Suitable for use on highly polished surfaces

code size

LU9945 400ml

code size

LU9946 400ml

code size

LU9948 400ml

Silicone Release LubricantSilicone agent used for the protection and lubrication of parts and equipment. Also effective for the release of plastic injection moulded parts. Colourless, odourless and non-staining lubricant

code size

LU9947 400ml

Dissolv-It Solvent Cleaner – Fast-DryingFast drying solvent cleaner designed for use on metal, machinery parts and most plastic surfaces to dissolve away contaminants, leaving no residue, eliminating the need for rinsing

White Spray Grease H1A highly tenacious water resistant white spray grease which is effective to high temperatures (-18oC to 200oC) and contains anti-wear additives for maximum component life. Water, chemical and corrosion resistant. Applications for use: Bearings, slides, bushes, pins and shafts

code size

LU9941 400ml

code size

LU9942 400ml

Link Lube Chain SprayTenacious anti-fling water resistant chain spray. Ideal for use on food conveyor systems where frequent wash down is required. Suitable for all types of chain drives

Multi-Lube Food Grade LubricantMulti purpose non toxic lubricant for use in and around food processing areas, on machinery, components and other parts requiring light lubrication. This product has good water displacement and penetrating properties, and effective corrosion resistance

code size

LU9944 400ml

code size

LU9943 400ml

Food and Drink Processing Lubricants– Specialist products for production and machinery maintenance – Clearly marked for food and drink processing areas– Effective and long lasting even under heavy usage– Registered and conform to NSF and INS food processing standards

Food & D

rink Processing Lubricants

Lubricants & Cleaners

FOR

EYEWASH

SYSTEMS

SEE PAGE 157

110 111

P.126Metal Waste Containers

P.120Longostand®

P.116

Unisort 100Recycling Systems

Bins & Waste Recycling Systems

Bins & Waste Recycling Systems Introduction 114UniSort™ 60 & 73 Recycling Systems 115UniSort™ 100 Recycling Systems 116UniSort™ 140 Recycling Systems 116Battery & Street Recycling Units 117Modulo™ Storage & 118 Recycling Systems Longostand® Waste Bin System 120General Waste Bins 122Wheeled Waste & Storage Bins 125Metal Waste Containers 126

Bins & Waste Recycling System

s


Packaging ProductsPlant Safety & Maintenance

e-tape High Performance Packing Tape

Benefits of e-tape:– Unique 150m length roll reduces down time and wastage– 127% more tape on the same size roll– 56% reduction in waste– Premium quality tape with high tack solvent adhesive ensures

an extra strong grip– e-tape Plus also available, which is solvent free

Benefits of e-tape Silent Dispenser– Heavy duty robust tape dispenser– Ergonomic design, well balanced and lightweight– Consistent smooth action eases application– Carefully designed to provide user benefits and exceptional value– Retractable blade for user safety; helps prevent damage– Innovative silencer bar keeps noise to a minimum

Megastretch Palletwrap Film

features: – High quality stretch film– Ensures low noise application and better presentation– Unique non-tack film quality to prevent pallets sticking together

in transit– Extra strength, black security film securely holds and conceals

pallet contents

Palletwrap Dispensers – Two Options– Light and economical dispenser; makes pallet wrapping easier

and reduces operator fatigue– Premium quality dispenser with ergonomic cranked handle;

makes dispenser easy to use and reduces operator fatigue. This dispenser adapts to take 400mm or 500mm palletwrap with a core diameter of 38mm or 50mm

Document Enclosed Envelopes

features: – Keeps shipping documents clean, legible and accessible– Strong self adhesive back ensures documents don’t go missing– Plain envelopes also available


PP5000 e-tape Silent Dispenser n/a

PP4800 e-tape Roll – Buff 48 x 150m

PP4801 e-tape Roll – Clear 48 x 150m

PP4802 e-tape Plus Roll – Buff 48 x 150m

PP4803 e-tape Plus Roll – Clear 48 x 150m

PP4804 e-tape Roll – Fragile 48 x 150m

PP4805 e-tape Roll – Security Seal 48 x 150m

code description size (internal) mm

PP4840 A7 Printed Affix Document Envelopes – Pk 1000

110 x 95


160 x 110

PP4842 A5 Plain Affix Document Envelopes – Pk 1000

215 x 160


215 x 160


PP4820 Megastretch Palletwrap Roll

Size 400 x 300mCore 38

PP4821 Megastretch Palletwrap Roll


PP4830 Megastretch Black Palletwrap Roll


PP5010 Economy Palletwrap Dispenser

Core 38

PP5011 Economy Palletwrap Dispenser

Core 50

PP5012 Premium Palletwrap Dispenser

Core 38 and 50PLAIN COLOURS ARE ALSO AVAILABLE, PLEASE CONTACT US FOR MORE INFORMATION

Packaging Products

112 113


Bins & Waste Recycling Systems Introduction

How environmentally responsible is your company..?

Why recycle in the workplace?Companies all over the UK are setting up recycling schemes that play a very important role in the way that companies operate, on a daily basis. An increasing amount of companies are realizing the significant impact that recycling can have and are concerned to minimize their waste output to help reduce their carbon footprint and preserve the environment

This is a result of:– Greater public awareness and understanding of the increasing

need to recycle – Recycling is a cost-effective method of dealing with your waste,

simply because it is often cheaper or a comparable price to general waste disposal. Increased cost of sending waste to landfill makes recycling an attractive financial proposition

– Most companies have managed to make significant savings from their cleaning contracts as less bins need to be emptied each day, by removing the many under desk bins and replacing with a larger centralized recycling unit

– EU objectives, which state that, by 2015, landfill will be banned for at least paper, glass, plastic, metal and textiles

– An increasing amount of companies are working towards ISO14001 accreditation and incorporating an approved Environmental Management System (EMS), which involves recycling

– Individuals and companies feel it is their responsibility to protect the environment and recycling is a simple and easy way of doing this!

– The UK is running out of space to keep burying rubbish at landfill sites

What should be recycled?When considering what you could recycle you need to consider:

– Which types of waste you generate in sufficient volumes to recycle effectively – analyze the material and volume trends in your company?

– You could start by recycling the most common waste in your workplace, such as paper, cardboard, aluminium cans, plastic bottles and cups, which most companies find relatively easy to organize. Most companies have vending machines and water coolers – this is a good place to start…

Implementing RecyclingPoints to consider when setting up your recycling:

– Ensure that you have someone responsible for ensuring that the scheme is fully implemented

– It is also important to gain the full support of management for the recycling scheme and consider space available

– Decide which types of waste you are going to recycle and analyze the volume of waste

– Choose appropriate recycling bins. A typical scheme includes bins for the collection of paper, cans, plastic bottles and general waste

– Identify key areas in your workplace and ensure bins are placed in locations that all employees can easily access

– Arrange the frequency of collections for your waste – Create awareness of the scheme and communicate

with all the employees and provide clear signage

Recycling Applications:– Offices, reception areas and canteens – Vending machines and water coolers– Warehouses and manufacturing environments

Is it worth recycling….Yes!Many companies who recycle at work save space by having designated areas and clearly labelled containers or bins for specific materials – join the millions that are already recycling!


s

UniSort™ 60 and 73 Recycling Systems

features:– Designed to offer a smart, unique and flexible solution

for the source separation of waste materials– Contemporary and sleek design helps bins fit into any office– Narrow footprint makes efficient use of limited space– Ergonomic lifting handles – enables easy lifting and emptying – Lids and bases are clearly labelled for easy identification – Two different base sizes in standard colour grey – 60L or 73L– Also available in lime green for mixed waste recycling – Base sizes:

60L – 275 x 590 x 705mm 73L – 275 x 590 x 830mm

code description colour capacity

RB 8100 Base Grey 60L

RB 8110 Base Grey 73L

RB 8105 Base Lime Green 60L

RB 8115 Base Lime Green 73L

code description colour

RB 8120 Paper Aperture Lid Blue

RB 8121 Paper Aperture Lid – Lock Blue

RB 8122 Plastic Bottle Aperture Lid Warm Red

RB 8123 Mixed Glass Aperture Lid Dark Aqua

RB 8124 Metal Can Aperture Lid Grey

RB 8125 General Waste Grab Lid Black

RB 8126 Mixed Waste Swing Lid Lime Green

code description

RB 8130 Desktop TidyCycler™

UniSort™ 60 & 73 Recycling Systems

Lid Colour Options (WRAP)1. Blue – Paper Aperture Lid2. Blue – Confidential Paper Aperture Lid with Lock3. Red – Plastic Bottle Aperture Lid4. Dark Aqua – Mixed Glass Aperture Lid5. Grey – Metal Can Aperture Lid6. Black – General Waste Grab Lid7. Green – Mixed Waste Recycling Swing Lid

Desktop TidyCycler™

A quick desktop solution to collect recycling refuse, before taking it to a central recycling station

1.2.

3. 4.

5.

7.

6.

UniSort™

60 & 73 Recycling System

s

Bins & W

aste Recycling Systems Introduction


s

This is where your recycling startsEasy fill, hands free..

WHAT DOES WRAP MEAN...? WASTE AND RESOURCES ACTION PROGRAMME

114 115

Battery & Street Recycling Units

UniSort™ Battery Collection Tubes

features:– Ideal for the collection and storage of used batteries– Innovative and unique design ensures that these eye catching

tubes stand out to encourage responsible battery disposal– Small footprint enables the containers to be used in areas

where space is limited– Clear polycarbonate tube with restricted aperture lid and firm

base. Easy to lift with moulded carry handles– Available in two sizes: 5L desk top model and 10L floor

standing model

ProStreet™ Double and Single-sided Recycling Units

features:– Domed top fitted with colour coded hinge flaps with handles– Single or double-sided version available– Complete all-round stainless steel grab rail on double unit– With concealed slam lock (key supplied)– Can be personalised with your logo– Black polished finish

ProStreet™ Single-sided fitted with:– 4 waste stream hinged lids – With 1 x Plastic Lid, 1 x Paper Lid, 1 x Cans Lid,

1 x General Waste Lid– 4 x 100L galvanised steel liners with handles

ProStreet™ Double-sided fitted with:– 8 waste stream hinged lids– With 2 x Plastic Lid, 2 x Paper Lid, 2 x Cans Lid,

2 x General Waste Lid– 4 x 100L galvanised steel liners with handles

MegaStreet™ Recycling Unit

features:– A compact and economically viable solution that

creates a focal point for recycling– This range of products is perfect for recycling on the go

and raising public awareness for the need to recycle– With bold colours and a unique design, the unit stands out

without dominating the environment in which it's located– Ideal for high footfall areas, which often suffer from the

problem of over flowing bins, which cannot offer the capacity to handle the waste or recycling generated

– Available with a self standing steel base plate which means that the units can be located without the need for costly groundwork

– Suitable for housing 1100L and 1280L wheeled bin containers– Wide range of colours and aperture options are available

code description capacity size mm

RB 8170 UniSort™ Battery Collection Tube 5L 230 dia x 444

RB 8171 UniSort™ Battery Collection Tube 10L 230 dia x 744

code description capacity size (w x d x h) mm

RB 9195 ProStreet™ Single-sided 200L 651x669x1398

RB 9196 ProStreet™ Double-sided 400L 651x669x1398


UniSort™ 100 Recycling System

features:– Ideal for internal waste recycling situations with larger volumes– Sack retaining feature for discreet fitting of refuse bags– WRAP compliant, colour coded, apertures and graphics

work well as a group or individually– Made from durable and recyclable medium density polyethylene– Any colour base or lid variations are available (standard

colour is white)– For food waste use black fliptop– Large 100L capacity – dimensions: 445 x 445 x 803mm

lid colour options1. Blue – Paper Aperture Lid2. Blue – Confidential Paper Aperture Lid with Lock 3. Grey – Metal Can Aperture Lid4. Red – Plastic Bottle Aperture Lid5. White – Plastic Cup Stacker Lid6. Green – Mixed Waste Recycling Aperture Lid7. Green – Mixed Waste Recycling Swing Lid8. Black – General Waste Swing Lid

UniSort™ 140 Recycling System

features:– Provides a large capacity system for higher footfall

areas, both indoors and outside– Ideal for large canteens, busy vending machine areas,

manufacturing and warehouse environments– Compact and space saving design with slam shut door– Double skin moulding gives exceptional strength– Easy to use sack retention hoop system– Optional key lock for secure outdoor use– Huge 140L Capacity – Dimensions: 550x615x1220mm– Even larger 240L version also available with space inside

for large wheelie bin – POA


RB 8140 UniSort™ 100L Base c/w Paper Slot Aperture Lid

White/Blue

RB 8141 UniSort™ 100L Base c/w Paper Slot Confidential Lid with Lock

White/Blue

RB 8142 UniSort™ 100L Base c/w Plastic Bottle Aperture Lid

White/Red

RB 8143 UniSort™ 100L Base c/w Metal Can Aperture Lid

White/Grey

RB 8144 UniSort™ 100L Base c/w General Waste Swing Lid

White/Black

RB 8145 UniSort™ 100L Base c/w Mixed Waste Aperture Lid

White/Green

RB 8146 UniSort™ 100L Base c/w Mixed Recycling Swing Lid

White/Green

RB 8147 UniSort™ 100L Base c/w Plastic Cup Stacker Lid

White/White


RB 8160 UniSort™ 140L c/w Paper Slot White/Blue

RB 8161 UniSort™ 140L c/w Plastic Bottle Hole White/Red

RB 8162 UniSort™ 140L c/w Gen Waste Hole White/Black

RB 8163 UniSort™ 140L c/w Mixed Waste Propeller

White/Green

UniSort™ 100 & 140 Recycling Systems

Battery & Street Recycling U

nits

UniSort™

100 & 140 Recycling System


s


s

FOR LARGE VEHICLE BATTERY STORAGE CONTAINERS SEE PAGE 67

PLEASE CONTACT US TO DISCUSS YOUR REQUIREMENTS AND PRICES FOR THIS RANGE

1.

4.

2.

5.

3.

6.

7. 8.

SMELLY BINS?

SEE PAGE 168

116 117


Modulo™

Storage & Recycling System

s

Modulo™

Storage & Recycling System

sBins & W

aste Recycling Systems


s

Modulo™ Storage & Recycling Systems

Modulo™ Storage and Recycling Systems

features:– Space saving, innovative storage and waste

collection module for areas where space is limited– Compact, vertical unit with very small footprint that is

simple to empty and easy to clean. Easy to use and empty – Enables easy colour coded source separation of collected waste– Single, 2 or 3 drawer units available with removable 25L

drawers fitted with easy carry handle – Variety of colours are available for colour coding drawers– Strong laminated wood structure fitted with four anti-slip

plastic feet offers stability and durability

Areas of Application– Central, communal recycling point in offices– Under each desk within offices– Reception areas and corridors– Vending machines/cupboards– Canteen/cafeteria and kitchens

Modulo™ Storage & Recycling Systems

Modulo™ Triple Cabinet

features:– Holds 3 x 25L drawers (included)– Strong laminated wood structure – With four anti-slip plastic feet– Supplied flat-packed– Size: 400x250x1000mm

Modulo™ Double Cabinet

features:– Holds 2 x 25L drawers (included)– Strong laminated wood structure – With four anti-slip plastic feet– Supplied flat-packed– Size: 400x250x680mm

Modulo™ Single

features:– Very versatile built-in storage and waste bin system

Can be stacked on top of each other and screwed together– With modern and quality design, especially useful for kitchens

and canteens. Great for cleaning or office supplies– Fit to either the base or below the top of the kitchen cabinet – Very hygienic and easy to keep clean– 1 x 25L drawer with easy carry handles– Available with painted grey steel or stainless steel cabinet – Size: 380x250x345mm

drawer colour options Please add the corresponding letters to code when ordering:

code description

RB 8182 Modulo™ Double - White

RB 8183 Modulo™ Double - Beech

code description

RB 8185 Modulo™ Triple - White

RB 8186 Modulo™ Triple - Beech

code description cabinet material

RB 8180 Modulo™ Single Grey Steel

RB 8181 Modulo™ Single Stainless Steel


RB 8190 Modulo™ Single Drawer 25L

Modulo™ Single Drawer – With Carry Handle

features:– 25L drawers are available separately to allow you to

modulate the drawers specifically to your needs, within your office or kitchen cabinets

– Creates a simple, organised and hygienic storage and waste system

– Build into kitchen, office, laboratory and cleaning cupboards etc

drawer colour options Please add the corresponding letters to code when ordering:

White

Green

Yellow

Red

Grey

Blue

W

G

Y

BR

GR

White

Green

Yellow

Red

Grey

Blue

W

G

Y

BR

GR

How to order your Double or Triple Cabinet...

1. Double or Triple? Decide on how many drawers you require. Also consider the height you have available

2. Choose the cabinet finish that suits your environment best (White or Beech) Select the relevant product code

3. Choose from the range of single 25L drawer colours. You can have any colour combination - mixed colours or all the same

4. When placing your order, quote the relevant drawer colours from the table above

Happy storage and waste disposal...!

118 119


Longostand® Waste Bin System



s


s

Practical– If the bag starts to fill up rapidly, simply pull more

bag through the stand – Very simple and easy to use – new bag is always ready to go!– Loaded with a bag cassette up to 100m in length– Wide choice of bag colours, with two material strength options

Economical– Retain more profit – use far less bags!– Quick bag replacement – save up to 50% in time instead of

changing bags– Variable bag size for flexible replacement intervals– Variable size bags are always 100% full, ensuring maximum use – No wastage of material as optimum utilisation of continuous

cassette

Hygienic– Bags are replaced and sealed from the outside – no user contact

with the waste. No more bad odours overnight to attract flies– Spillages around the opening are collected by the next bag– Bag is always securely sealed, simple to keep clean– No over-spill – simply extend the bag!

Environmentally Friendly– Ultra strong 3-ply polyethylene ensures low usage– Variable bag size always ensures bags are 100% full– Compact packages – refill is smaller than a shoe box,

means lower transport costs!– The bag material is much stronger and thinner than

traditional waste bags.– Independent lifecycle analysis shows that only 1/10

carbon is released compared to an ordinary bag– 100% biodegradable bags also available

Applications– Manufacturing assembly lines, especially large

volumes of ‘bulky’ packaging waste – Food factories, kitchens and canteens– Hospitals and operating theatres– Warehouses and offices

Quicker, easier and more hygienic…simply betterOnly 30 seconds to seal and re-load bag. New bag always at hand – no need to waste time getting new bags

LONGOSTAND® BIN SYSTEM for smarter and more efficient waste management


Longostand® Mini & Maxi Mini refill up to 55m, Maxi refill up to 100m long

features: – Floor standing bin that can be easily wheeled around– Base plate and cassette made of ABS plastic. Aluminium legs and galvanised steel wheels – Version with stainless steel legs and wheels also available– Adjustable tilting head on Mini, enables rapid loading– Wall Bracket available in aluminium with plastic cassette holder

code description size mm opening diameter mm

LS8005 Mini Bin – Floor Standing 850 x 350 290

LS8006 Mini Wall – Bracket n/a n/a

LS8000 Maxi Bin – Floor Standing 1055 x 570 420

LS8002 Maxi Wall – Bracket n/a n/a

code description strength

LS8020 Maxi Cassette Refill – 100m Standard

LS8025 Maxi Cassette Refill – 80m Strong

LS8030 Mini Cassette Refill – 55m Standard

LS8035 Mini Cassette Refill – 45m Strong

Longostand® Cassette Refills

Colour options Please add the corresponding letters to code when ordering:

Blue

Green

Yellow

Red

Black

Transparent

B

G

BL

TR

Y

R

LONGOSTAND® WASTE BIN SYSTEMThe Professionals Choice

No more over-flowing bins...

3. Apply Second Clip Tie 4. Pull Both Tight2. Apply First Clip Tie1. Gather Bag

5. Cut Bag 6. Remove Bag 7. Pull Down Bag 8. Ready To Use

2 secs

26secs

15 secs

28secs

Longostand® Accessories

– Adaptor Disc – Reduces the size of bin opening and ensures greater compaction in the bag, ideal for soft plastics

– Connector Kit – Joins two floor standing bins together, can be used to join a Maxi and a Mini or two of the same bin


LS8055 Mini Lid 330 Dia

LS8050 Maxi Lid 513 Dia.

LS8004 Maxi Adapator Disc n/a

LS8060 Connector Kit n/a

LS8062 Clip Ties - Maxi (Pk 130) n/a

LS8063 Clip Ties - Mini (Pk 65) n/a

Blue detectable Clip ties for use in food industry also available POA

Time taken to change bag in seconds

21secs

30secs

23secs

Adaptor Disc

120 121


General Waste Bins General Waste Bins

Round Hatch Bins

features:– Use in receptions, toilets, offices, kitchens, canteens etc– Stainless steel hatch with automatic return– Lid is linked securely to steel body with a strap– Bags held by clamps; easy fitting and removal of bags

Stainless Steel Pedal Bins

features:– Premium quality, stainless steel bin for optimum hygiene – 3L size with inner black plastic bucket with metal handle– 20L size with inner galv. Steel bucket with metal handle– Silent lid closure – fitted with shock absorber

Cupboard Bin

features:– Simple and hygienic solution for collection of kitchen waste– Lid automatically opens and closes as cupboard door is pulled

open, to prevent any bad odours from arising– Fit to the inside of a cupboard door (min height of door

400mm)

Mobile Plastic Pedal Bins

features:– Strong polyethylene wheeled plastic bin– Easy to manoeuvre with handle and smooth-glide wheels– Foot pedal for hygienic operation

Plastic Swing Lid Bins

features:– Smart and practical polypropylene bins with colour coded

swing lid tops for segregation of waste– Lift-off lid for easy access – easy to clean

Plastic Pedal Bins

features:– Robust and easy to clean, polypropylene plastic bin– With inner plastic bucket with handle

Round Foot Pedal Bins

features:– High quality, indoor bin with foot pedal for ultimate hygiene– Stainless steel hatch with automatic return– Complete with 52L inner galvanised steel bucket with handle– Powder coated black or stainless steel

Oval Swing Lid Bins

features:– Classy indoor oval shaped bin for receptions, toilets,

kitchens, canteens and offices– Stainless steel body and top with black plastic swing lid– Vandal proof – top linked to the body by a strap– With black plastic inner bucket with steel handle

Fireproof Bins

features:– Fireproof bin with self-extinguishing system– Special lid design helps to stop fire from spreading– Hole opening 125mm diameter– 30L capacity (Other sizes available)

Cup Collector Indoor Bin

features:– Excellent solution for large volumes of waste disposable cups – Save space and empty the bin less often, as cups slot into each other– Dual purpose: cup collector (800 cups) and 25L bin– Applications: vending machines, water coolers, canteens– Side handles integrated in design of the bin – for easy handling– Made of durable polyethylene plastic


WB 8230 Round Hatch Bin – Stainless Steel 45L 310 dia x 775

WB 8231 Round Hatch Bin – Silver Grey 45L 310 dia x 775

WB 8232 Round Hatch Bin – Black 45L 310 dia x 775


WB 8255 White Plastic Pedal Bin 3L 180 dia x 210




WB 8275 Cupboard Bin – White 16L 280x170x390


WB 8265 Plastic Swing Lid Bin – White 25L 320x240x500

WB 8266 Plastic Swing Lid Bin – White/Red 25L 320x240x500

WB 8267 Plastic Swing Lid Bin – White/Blue 25L 320x240x500

WB 8268 Plastic Swing Lid Bin – White/Green 25L 320x240x500

WB 8269 Plastic Swing Lid Bin – White/Yellow 25L 320x240x500

WB 8270 Plastic Swing Lid Bin – White 50L 385x320x620

WB 8271 Plastic Swing Lid Bin – White/Red 50L 385x320x620

WB 8272 Plastic Swing Lid Bin – White/Blue 50L 385x320x620

WB 8273 Plastic Swing Lid Bin – White/Green 50L 385x320x620

WB 8274 Plastic Swing Lid Bin – White/Yellow 50L 385x320x620


WB 8250 Stainless Steel Pedal Bin 3L 170 dia x 253

WB 8251 Stainless Steel Pedal Bin 20L 253 dia x 640


WB 8260 Mobile Plastic Pedal Bin – White 90L 510x510x895

WB 8261 Mobile Plastic Pedal Bin – White/Red

90L 510x510x895

WB 8262 Mobile Plastic Pedal Bin – White/Blue

90L 510x510x895

WB 8263 Mobile Plastic Pedal Bin – White/Green

90L 510x510x895

WB 8264 Mobile Plastic Pedal Bin – White/Yellow

90L 510x510x895


WB 8246 Fireproof Bin (Blue) 30L 125 dia x 390

WB 8247 Fireproof Bin (Silver Grey) 30L 125 dia x 390

WB 8248 Fireproof Bin (Black) 30L 125 dia x 390


WB 8235 Round Foot Pedal Bin – Stainless Steel & Chrome

52L 440 dia x 930

WB 8236 Round Foot Pedal Bin – Black 52L 440 dia x 930


WB 8240 Oval Swing Lid Bin – Stainless Steel 40L 420 x 310 x 675

WB 8241 Oval Swing Lid Bin – Stainless Steel 59L 500 x 390 x 710


WB 8245 Cup Collector Bin (Black) 800 cups & 25L bin

390 dia x 700

General W

aste Bins

General W

aste BinsBins & W



s

122 123


Wheeled Waste & Storage Bins

Wheeled Bins

features:– Use for general waste and storage of materials– With hinged lids and handles– Robust construction – high density polyethylene– Available in 120L, 240L, 360L and 1100L sizes– 1100L bin is available with drop front option– 1100L bin fitted with 4 castor wheels (2 with lock)– Standard stock colour is yellow. Also available in black, blue,

green, red and grey as special orders

Large Round Storage or Waste Container

features:– Use for general storage, waste collection, food

preparation and bio–hazard waste– Seamless construction offers maximum

strength and easy cleaning– Stackable for easy storage– Secure push fit lid and 5-wheel dolly also available

Large Square Storage or Waste Container

features:– Use for general storage or for waste collection and storage

of materials or ingredients– With non-slip handles and rounded corners for easy cleaning– Secure push fit lid and 4-wheel dolly also available

Small Round Waste Container

features:– Ideal for collection of general waste or storage of materials

and spill absorbents– With carry handle, strong hinged lid and secure metal

lid-lock bar– Durable and robust black polypropylene


WB 8300 Wheeled Bin 120L




WB 8304 Wheeled Bin c/w drop front 1100L


WB 8320 Large Round Waste Container – Blue 75L

WB 8321 Large Round Waste Container – White 75L

WB 8322 Secure push fit lid – seals tight – White n/a

WB 8323 5-wheel dolly chassis – Black n/a


WB 8325 Large Square Waste Container – Red 140L

WB 8326 Large Square Waste Container – White 140L

WB 8327 Secure push fit lid – Red n/a

WB 8328 Secure push fit lid – White n/a

WB 8329 4-wheel dolly chassis – Black n/a


WB 8310 Small Round Waste Container – Black 35L

Wheeled W

aste & Storage Bins

General W

aste BinsBins & W



s

General Waste Bins

Elegance Bins

features:– High quality and stylish, metallic silver bin made from

powder coated steel– Easy fitting and removal of bag – with sack holder clamps– Discreet opening and closing mechanism – no key required– Perforated bottom to allow the drainage of any rainwater– Available as wall mounted or on stand – both with fitting points – Use an inner steel bucket with these bins

Natura™ Outdoor Bins

features:– Round waste bins with dark grey steel lid and natural wood

slat surround– Top and structure of bin in dark grey powder coated steel– With simple locking system and ground fixing points– Supplied with inner steel bucket with handles

Legend™ Outdoor Litter Bin

features:– Sleek and modern bin with compact 470mm footprint – With round, double-skin hood and polished finish– Integral 18” sack retaining rim with tapered 100L steel liner – Colours: black, grey, light blue, navy blue, yellow, green,

dark green (other colours available on request)– Easy-empty ashtray or stubber also available

Grande™ Litter Bins

features:– Practical solution for general waste and litter– Simple front opening system – discreet locking system – Easy fitting and removal of bag – with sack holder clamps– Powder coated steel – Available as wall mounted or floor standing in

dark grey or metallic silver– Use an inner steel bucket with these bins


WB 8200 Elegance Bin – Wall Mounted 40L 580 x 120 x 600

WB 8201 Elegance Bin – Floor Standing 40L 580 x 250 x 910

WB 8202 Elegance Bin – Floor Standing 60L 580 x 250 x 1010

WB 8203 Elegance Inner Bucket 40L 410 x 240 x 450

WB 8204 Elegance Inner Bucket 60L 410 x 240 x 720


WB 8225 Legend™ Bin 100L 547 dia x 1082

WB 8226 Fixing Bolt Kit n/a n/a

WB 8227 Stubber Plate n/a n/a

WB 8228 Ashtray n/a n/a


WB 8220 Natura™ Bin – Dark Grey/Wood 40L 350 dia x 780

WB 8221 Natura™ Bin – Dark Grey/Wood 60L 450 dia x 1050


WB 8210 Grande™ Litter Bin – Wall Mounted – Dark Grey

30L 410 x 240 x 610

WB 8211 Grande™ Litter Bin – Wall Mounted – Metallic Silver

30L 410 x 240 x 610

WB 8212 Grande™ Litter Bin – Floor Stand – Dark Grey

60L 470 x 260 x 910

WB 8213 Grande™ Litter Bin – Floor Stand – Metallic Silver

60L 470 x 260 x 910

WB 8214 Grande™ Litter Bin Inner Bucket 30L 350 x 230 x 430

WB 8215 Grande™ Litter Bin Inner Bucket 60L 410 x 240 x 680

124 125

METAL WASTE CONTAINERS


Metal Waste Containers

features:– Rigid hot dip galvanised steel construction with internally

welded seams – Built to last, providing a long and valuable service– Good fire containment and resilience to vandalism– Available in capacities of 660L, 1100L and 1280L– Available in a wide varity of colours with logos – Recycling lids and signs available

…probably the world’s most durable waste containers

Additional Options

Hands Free– Adapted for situations

where bulky items limit the use of both hands

– Easy to operate foot pedal for excellent hand hygiene

Mesh Cage– Mesh side panels allow

staff to instantly see any contaminated waste

Drop Front & Drop Back – Helps avoid health and

safety risks associated with handballing heavy bags or waste

– Easy access to bin contents

POA – PLEASE CALL US TO DISCUSS YOUR REQUIREMENTS

Metal W

aste Containers

Site Facilities

Lockers 128Changing Room Benches 131Bike Compounds & Shelters 132Bollards 134Smoking Shelters & Ashtrays 135Infrared Heaters, Picnic Tables 136 & Benches

P.128Lockers

P.132 Bike Compounds and Shelters

P.135Smoking Shelters

Site Facilities


s

Forklift Slots– Move around site easily

with forklift– Great for heavier waste

Clinical Waste – UN approved clinical waste

container

Locks and Lids – Full range of lids and wheels– Super strong metal lids

available for 1100L size bin

Towing – Bins can be towed in a 'train', ideal for large sites using

recycling systems

126 127

Site Facilities

Site Facilities

Locker Size – W 300 x D 450 x H 1800mm

code size nest tiers size (w x d x h) mm

LC1021 Standard Locker 1 1 300 x 450 x 1800



































LC1041 Perforated Door Locker 1 1 300 x 300 x 1800
































Lockers Lockers

Standard Lockers and Locker Nests

features: – Quality compartment lockers suitable for a multitude of storage

applications. Standard lockers provide flexibility with a number of options available, from 1 to 6 tier options.

– 2, 3, 4 and 6 door lockers are fitted with security shelf to prevent unauthorised access to the compartment below

– Nests save up to 10% over the price of individual lockers and take less time to install

– Single tier lockers fitted with top shelf and coat hook– Two tier lockers fitted with coat hook in each compartment– Strengthened and ventilated doors with rubber buffers– Powder coated with Germ Guard Active Technology

anti-bacterial paint– Choose from 2 compartment depths: 300mm or 450mm

Door Colour Options Please add the corresponding letters to code when ordering:

Perforated Door Lockers and Locker Nests

features: – Designed for situations where efficient ventilation and

maximum visibility combined with security are essential– 2, 3, 4 and 6 door lockers are fitted with security shelf to

prevent unauthorised access to the compartment below– Nests save up to 10% over the price of individual

lockers and take less time to install– Single tier lockers fitted with top shelf and coat hook– Two tier lockers fitted with coat hook in each compartment– Strengthened and ventilated doors with rubber buffers– Powder coated with Germ Guard Active Technology



Light Grey

Dark Blue

Light Blue

Green

Red

Yellow

L

B

LB

G

R

Y

2 Tier Nest of 1 2 Tier Nest of 2 2 Tier Nest of 3 2 Tier Nest of 1 2 Tier Nest of 2 2 Tier Nest of 3

Lockers

Lockers

Light Grey

Dark Blue

Light Blue

Green

Red

Yellow

L

B

LB

G

R

Y

128 129

Site Facilities

Site Facilities

code size size mm

BE2010 Wall Mounted Bench 1500 x 300

code size size (w x d x h) mm

BE2000 Island Bench – Single sided 1500 x 300 x 1630

BE2001 Island Bench – Single sided & Basket 1500 x 300 x 1630

BE2005 Island Bench – Double sided 1500 x 600 x 1630

BE2006 Island Bench – Double sided & Basket 1500 x 600 x 1630

code size tiers size (w x d x h) mm

LC1080 Express Lockers 1 300 x 300 x 1800









LC1090 Heavy Duty Locker 1 300 x 300 x 1800











LC1100 Personal Effects Lockers 20 900 x 380 x 940




Lockers Lockers & Benches

Express Lockers

features: – A high quality, low cost solution for storage in the workplace– 2, 4 and 6 door lockers are fitted with security shelf to prevent

unauthorised access to the compartment below– Pre-drilled for nesting lockers together, if required– Single tier lockers fitted with top shelf and coat hook– Two tier lockers fitted with coat hook in each compartment– Strengthened and ventilated doors with rubber buffers– Powder coated with Germ Guard Active Technology


Heavy Duty Lockers

features: – Very heavy duty, all-steel locker made to withstand even

the toughest environments– Carcass is made from 70% thicker steel than a standard

carcass for added stability and rigidity– Door is made from thick steel (nearly three times thicker

than a standard door) to prevent forced entry– Fitted with 5 knuckle hinges and a heavy duty cam lock for

added security– Choose from 2 compartment depths: 300mm or 450mm


Personal Effects Lockers

features: – These lockers are an ideal way of providing secure storage

for smaller items, offering increased security in the workplace– Fitted with standard mastered cam locks– Through frame shelf for extra security– Compartment entry aperture W 163 x D 360 x H 150– Powder coated with Germ Guard Active Technology

anti-bacterial paint– Pre-drilled for nesting– Choose from 20, 28 and 40 Tier options


Island Benches

features: – Available as single or double sided– Single sided: 5 Hooks– Double sided: 10 Hooks– Optional under seat basket, for extra storage– Durable timber finish slatted seat– Supplied with coat hooks

Wall Mounted Bench

features: – Durable bench with timber finish slatted seat– Provides a practical solution where floor space

is at a premium– Wall fixings not supplied

Lockers & Benches

Lockers


Light Grey

Dark Blue

Light Blue

Green

Red

Yellow

L

B

LB

G

R

Y

Light Grey

Dark Blue

Light Blue

Green

Red

Yellow

L

B

LB

G

R

Y

900

900

900450

940

1800 1800

1285

DIRTY SHOES

OR BOOTS

SEE PAGE 169

SMELLY

CHANGING

ROOMS

SEE PAGE

168

130 131

Site Facilities

Site Facilities

code description stores size (w x d x h) mm

BS9000 Lockable Gate & Canopy 16 Bikes 5500 x 3000 x 2625



Bike Shelters

Bike Shelter Compounds

features: – A stylish compound with facilities to house up to 48 bikes. – Fitted with a curved roof, made from UV resistant opaque polycarbonate

panels and central canopy for extra security and weather protection– Options for storage of 16, 32 and 48 bikes– Attractive gate with hasp to take padlock– Side panels made from tough, clear perspex– Comes complete with twin level bike racks– All metal parts powder coated for improved weather resistance– Must be bolted to 250mm thick concrete (fixings included)– Delivered in knock-down form

Colour Options Please add the corresponding letters to code when ordering:

If sited within 5 miles of the coast, we strongly recommend an additional weather treatment for the steel work. This is available for a modest additional charge.


BS9020 Traditional Bike Rack 6 Bikes 1750 x 600 x 935

BS9021 Traditional Bike Rack 8 Bikes 2350 x 600 x 935


BS9022 Bike Loop 2 Bikes 470 x 805


BS9010 Perforated Steel Sides 8 Bikes 3000 x 2100 x 2320

BS9011 Clear Perspex Sides 8 Bikes 3000 x 2100 x 2320

Premier Bike Shelters

features: – The Premier Bike Shelters have a curved, contemporary

design, intended to blend into both traditional and modern environments

– Provides tidy and secure storage of bikes on any site– Choice of clear perspex or powder coated steel sides

and back panels– Adjustable feet for on-site positioning– Parabolts for surface mounting included. Must be

bolted to 250mm thick concrete for stability– Comes complete with twin-level integrated bike rack for

8 bikes


Traditional Bike Racks

features: – A sturdy twin-level bike rack, for storage of up to 8 bikes– Made from tubular steel– Simply bolts to floor– Fully welded no assembly required– Powder coated grey

Bike Loops

features: – Straightforward and simple, rider-friendly design– Easy to use and encourages controlled and

efficient cycle storage– Made from 50mm diameter tubular steel– Simply bolts to the floor– Fully welded – no assembly required– Powder coated light grey

Bike Shelters

Bike Compounds


BIKE COMPOUNDS

16 32 48

Compound without central canopy POA

Compound with central canopy

Cycle to work to reduce your carbon footprint.

Light Grey

Dark Blue

Green

L

B

G

Light Grey

Dark Blue

Green

L

B

G

132 133

Site Facilities

Site Facilities

Smoking Shelters & Ashtrays


SS9015 Frame Mounted Seat – Front 1260

SS9016 Frame Mounted Seat – Rear 1400


SA4000 Floor Standing Ashtray – Grey 5L 150 x 350 x 910

SA4009 Base Weight – Bag of Sand n/a 10kg


SA4010 Wall Mounted Ashtray 1L 150 x 60 x 282

SA4015 Wall Mounted Ashtray 2L 230 x 60 x 282


SS9000 Perforated Steel Sides 9 People 3000 x 2100 x 2320

SS9001 Clear Perspex Sides 9 People 3000 x 2100 x 2320

Premier Smoking Shelters

features: – The Premier Smoking Shelters have a curved roof made from

translucent polycarbonate panels, giving up to 97% UV protection– Contemporary design enables employers to provide a modern

and aesthetically pleasing smoking area away from main entrances and exits

– Robust all-weather construction– More than 50% open area to allow rapid dispersal of cigarette fumes– Choice of clear perspex or powder coated steel side and back panels– Adjustable feet for on-site positioning– Parabolts for surface mounting included. Must be

bolted to 250mm thick concrete for stability


code description size w x d x h (mm)

SS9010 Stainless Steel Perch Seat 1150 x 300 x 900

SS9011 Light Grey Perch Seat 1150 x 300 x 900

Perch Seats

features: – Stainless steel or powder coated light grey

Frame Mounted Seats

features: – Stainless steel– Suitable for fitting at the front and back of the

shelters listed above

Floor Standing Ashtray

features: – High quality and versatile ashtray– Quick and easy emptying – ash bucket

is very simple to remove– Polyester powder coated grey steel – Lock with triangular key– Can either be fixed to the floor or

weighted with sand– 5L bin capacity

Wall Mounted Ashtrays

features: – Quick and easy to empty – simply

unhook the front– Weather protection design– Lock with triangular key– Sturdy and vandal proof, with

4 wall-fixing points– Dark grey (other colours are available)– 1L or 2L bin capacity

Smoking Shelters &

Ashtrays

Bollards


Light Grey

Dark Blue

Green

L

B

G

Ground Fixing Options

1. surface fixing – A fixing system for use in industrial

factories, warehouses, multi-storey car parks and bridges etc. The bollard base is fixed directly to a shallow concrete substrate using 95mm expanding bolts.

2. permanent fixing– For permanent fixing, the bollard base is

concreted in below ground. The moulded return at the base ensures that the bollard cannot be removed.

3. socketed fixing– This form of fixing is ideal for use in

applications where the occasional replacement or removal of a bollard may be required.

4. anti-ram fixing– A robust steel core, permanently

concreted into the ground, provides a rigid and effective deterrent to ram-raiding. Can also be used to enhance pedestrian safety in high risk areas.

Bollards

Sentinel BollardsA contemporary, versatile and multi-functional bollard that is suitable for a wide range of urban and industrial locations

features: – Ideal for areas that require effective traffic calming schemes,

demarcation of parking and pedestrian areas and hazard marking– Suitable for use in industrial factory and warehouse environments– Fully compliant with DDA regulations (Disability Discrimination

Act 1995)– Manufactured from black, medium density moulded polyethylene– With single class 1 reflective band around the top of the bollard

(red or yellow options)– Optional 4-band bollard is available for high visibility, on highways

Sentinel Sign BollardsIn addition to the Sentinel Bollard benefits listed above, the Sign Bollards help to create a versatile traffic management system

features: – Variety of signs available for many applications– Single or double face options (Sign face size: Dia. 300mm)

Reflex Sentinel BollardsIn addition to the Sentinel Bollard benefits listed, the Reflex Bollards have the following features:

features: – Incorporate a patented self-righting mechanism to withstand

impact from any direction– Designed to adapt to a wide range of environments and is ideal

for vulnerable sites where conventional bollards require frequent replacement

– Help minimise the need to replace bollards and reduce costs– It is not recommended that the Reflex Bollard is fitted with the

Socketed or Anti-Ram fixings

code fixing option bands band colour size mm

BA9050 Surface 1 Red 166 dia x 1030

BA9051 Surface 1 Yellow 166 dia x 1030



BA9054 Permanent 1 Red 166 dia x 1030

BA9055 Permanent 1 Yellow 166 dia x 1030



code fixing option bands band colour size mm









POA - THERE ARE MANY DIFFERENT SIGN OPTIONS – PLEASE CONTACT US TO DISCUSS YOUR REQUIREMENTS

1.

2.

3.

4.

Other fixing options price on application – Please contact us. Other fixing options price on application – Please contact us.

134 135

Skin Care & Industrial Hygiene

Skin Care Introduction 138Hanzl® Zone Wallboards 139Stop It® Hand Protection 140FT5000™ Dispensers 142 FT5000™ Products 143Duroline® Dispensers 144Duroline® Skin Protection Creams 145Duroline® Skin Cleansers 146Multiline® Dispensers 148Multiline® Products 149Multiline® Skin Cleansers 150Multiline® Starter Packs 151Slimline® Dispensers 152Slimline® Skin Care System 153Hanzl® Hand Cleaning Wipes 154Big Wash® Value Products 156iWash® Introduction 157iWash® Products 158eyeVolution® Products 159Double iWash® System 160QuickFix Plasters 161First Aid Products 163First Aid Kits 165 Odel® Odour Control Products 168Pump Sprayers & Foggers 169greenO clean® Cleaner & Degreaser 170Fly Bones® Fly Catchers 172Rodent Repeller 174

Skin Care & Industrial H

ygiene

Infrared Heaters, Picnic Tables & Benches


IH2310 Elite Heater – 1.5kw

455 x 115 x 95

IH2311 Elite Heater – 2.0kw

605 x 130 x 100


IH2300 Royal Heater – 1.3kw

415 x 210 x 200

IH2302 Royal Heater – 2.0kw

515 x 230 x 200


IH2320 Portable Heater – 2 x 1.5kw

630 x 790 x 600

Electric Infrared HeatersHeat is transferred by shortwave infrared radiation generated by the heater tube and reflector, with a temperature that is higher than the surrounding air. Objects and people in the environment absorb the radiation and they heat up

benefits: – Efficient; 92% of energy used is turned into infrared heat, just

like the sun. Instant on/off heat

– The lamps are not affected by wind, there are no energy losses and targeted areas can be heated very efficiently

– Versatile; Can be installed in a number of applications from smoking shelters, food processing areas, garages, workshops, warehouses, factories, receptions and offices

– No noise, no dust and no combustion fumes– Cost effective; Easy to install, no central heating unit or major

building work required


Portable Heater

features: – Portable, heavy duty floor standing heater– Swivel head allows heat to be applied

at a number of different angles– Suitable for many commercial and

industrial applications– Constructed from heavy duty steel

and aluminium– Includes 2 x 1.5kw ruby lamps, with

quality reflector and safety guards– Easy to manoeuvre around the site – with

push handle and roller wheels

Elite Heater

features: – High quality, elegant, water and dust

protected heater– Provides superior levels of heat distribution

from a compact and slimline chassis– Utilises a glass screen-free combined

reflector and body– Constructed entirely from aluminium –

will provide many years of effective and reliable service

– Wall mountable and can be used as a single or modular unit

– IP65 rated for outdoor use– 2kw version heats area up to 14m2

Royal Heater

features: – High performance heater, incorporating

a 1.3kw or 2kw gold lamp– IP23 rated – suitable for

permanent outdoor use– Wall mountable – supplied with

mounting bracket (fully adjustable)– Cast aluminium construction with highly

polished reflector and safety guard– 2kw version heats area up to 14m2


OF3000 Rectangle Table 6 People 1600 x 1000 x 700

OF3001 Round Table 6 People 1600 x 1000 x 700

OF3002 Round Table 8 People 900 x 1800 x 700

OF3009 Bolt Down Kit n/a n/a

Outdoor Picnic Tables

features: – Treated softwood– Rectangle table available as a 6-seater option– Round table available as a 6 or 8-seater option – Bolt down kit also available for all picnic tables

Outdoor Seating Bench

features: – Solid hardwood– High quality, durable seating bench– Shaped and manufactured for extra comfort and style


OF3010 Outdoor Seating Bench 3 People 1530 x 420 x 860

Site FacilitiesInfrared H

eaters, Picnic Tables & Benches

P.139HANZL® ZONEWallboards

P.140STOP IT!®Products

P.160Double iWash® Solutions

136 137


ygiene

Particular risks and causes– Frequent or long contact with substances such as

water-based cooling lubricants, acids and lyes, cleaning solutions and damp food

– Intensive cleaning after contact with oil, grease and adhesive soils such as paints, glues etc

– Sweating and contact with the moisture build-upinside gloves, causing skin softening

Do you realise the serious effects skin problems can have on your company?– Reduced workforce due to sickness absence from work– Recruiting and re-training costs– Lose the full productivity of your workforce– Large compensation claims– Lengthy and costly court procedures– Fines and embarrassing press headlines– De-motivated staff and low morale

It pays to take the correct, preventative measuresOur full understanding of the needs and requirements of your industry has enabled us to offer you a proven and tailor-made approach with problem solving solutions that you can trust

Our Hanzl® skin care products & systems will help:– Keep your workforce safe, healthy and productive– Motivate your staff, because they feel good about coming

to work– Your staff to gain understanding as to the importance of

skin care. Encourage them to comply with hygiene and skin protection protocols

– Reduce the risk of skin problems occurring, such as industrial dermatitis

– Minimise the risk of compensation claims from employees– Increase productivity and save costs by reducing the number

of employees on sick leave– Ensure dispensers are placed correctly around the workplace, to

encourage your employees to actually use the skin care creams

HANZL® ZONE Skin Safety Centres

Any combination of Hanzl® Zone Wallboards can be specially made to suit your needs!

features: – Sturdy wall mounted boards holding a variety of products and dispensers,

creating the ultimate 1 to 6 step skin care programme– All dispensers are very durable and will give many years of hassle free

operation and are lifetime guaranteed!– Wallboards include important employee guidelines which help employers

meet their duty of care obligations– Select appropriate creams and hand cleaners to customise the wallboard

to your employee’s needs– We will advise you as to the correct placement of dispensers and

wallboards, to help ensure that your employees actually use the skin care creams. We strongly recommend that skin care creams are kept away from wash room areas and are situated at strategic locations around the workplace. An ideal location for skin care creams is near the clocking in/out machine

Three Different Hanzl® Zone SizesCompact Wallboard W 500 x H 500 mmPro Wallboard W 800 x H 600 mmMega Wallboard W 1050 x 600 mm

Please note: Combination of boards shown here are all examples – please specify what you require on your wallboard when ordering

Your hands are the best tools you'll ever own – so look after them!

Our tailor made approach includes the following three steps:

Skin ProtectionSkin protection products help to prevent contact between the effective substance and the skin. It is vitally important to choose the correct product to ensure suitability for the substances being handled

Skin CleansingSelection of the correct cleanser is very important. They should be selected according to their suitability for the type of dirt or soiling. To avoid stressing the skin, cleansing should be as gentle as possible. Inadequate cleansing can cause skin disease

Skin CareYour hands should be cared for regularly, especially after work. Skin care products protect against rough, dry and chapped skin and also help to ensure the skin’s natural protection function is upheld. Cared for skin not only looks better, it is also more resistant to day-to-day stress

As part of our excellent, 'hands-on' service we also offer:

Site SurveysWe can offer a full site survey that is specific for your work environment and requirements. Identifies the most applicable products required and the most suitable locations

Free Product TrialsWe can send you a free trial of the products we recommend for your work environment. This is to ensure that your staff are fully satisfied and that the correct and most effective products have been specified.

Skin Care TrainingOnce the correct products and skin care systems are installed, we can train your staff to use them properly and increase their awareness as to the importance of skin care

If only hands could talk...®

Within many different working environments, including engineering, manufacturing, construction, transport and warehousing, there are many potential risks to the skin. If the skin is subject to high levels of stress or loss of moisture, the natural barrier function can be damaged.

Everyday hazards to the skin

healthy skin

Dehydration of the skin through the loss of water

damaged skin

Dry skin may be an indication of serious skin damage which could lead to skin disease. Protection and care measures should be taken immediately!

Hanzl® Zone W

allboards


ygiene


Risks and Hazards to the Skin

HANZL® ZONE Wallboards

SKIN CARE Keeping hard working hands healthy & productive

Skin Care Introduction

138 139


ygiene


ygiene

Stop It All-in-One® Aerosol before work

features: – Aerosol for wet or dry work – Unique invisible skin

protection cream with 5 moisturising agents

– Forms a highly resistant barrier between the skin and many different types of soiling

– Helps reduce skin disease by washing quicker and easier

– Suitable for all skin types

STOP IT ® Hand Protection Cream

features: – Wash off hand protection system for dry work– Works like an invisible glove– Helps to protect against oil, grease, solvents, paints, glues,

resins, alkalis, tar, varnishes, adhesives, fats, lacquers, graphite, silicones and many types of workshop grime and almost any substance that is not water based

– Contains no silicones, therefore can be used in paint shops– Forms a dry elastic and strong protective film– Proven for over 40 years and dermatologically tested– Helps prevent rough, dry chapped skin– Simply wash off with water after working, very little or

no hand cleaner is necessary– Helps to reduce skin disease by washing easier and

quicker, saving water and using less soap– Simple application with no sticky feeling and short drying time– Dexterity and other skin functions are maintained– Contains no preservatives– Excellent skin compatibility, suitable for all skin types

code size

ST1005 115ml Pocket Pack

ST1010 1L Tub

ST1016 1.6L Dispenser Cartridge

ST5016 1.6L Stainless Steel Dispenser

code size

ST1020 510g Tin

STOP IT ® H

and Protection Cream For Before W

ork

STOP IT® H

and Protection Cream


...wash off hand protection

Apply Work Wash off easily Clean healthy hands

STOP IT ®

Hand Protection Cream


USED BY 6 LEADING EUROPEAN

CAR MANUFACTURERS

Try BEFORE YOU BUY!

Call For a free sample

STOP IT ® Hand Protection Cream For Before Work

140 141


ygiene


ygiene

FT5000™ Flexible Dispenser System

features: – Cartridge Empties 100%. Zero Wastage – other systems waste

up to 30%– Large 5L Capacity. Gives up to 1500 washes from 4L refill

plus 1 Litre back-up– Easy to Load. No key needed – Excellent auto-security system– Very Durable Pump. Virtually bullet proof! No quibble lifetime guarantee– 1L Reservoir. Helps ensure you never run out of hand cleaner!

code size

FT5000 4L Tank Dispenser

FT5001 Hand Pump for 4L Tank – For free standing use

FT5002 Wall Bracket for 4L Tank – To mount tanks in neck up position

code size

FT2505 650ml Tube (Pumicized)

FT2515 4L Tank (Pumicized)

Hanzl® Top Wash®Light duty cleanser soap for hands and body, for light soiling

features: – For washing in general washrooms, offices and showers etc.– Six premium skin conditioners– Fresh Floral fragrance– Suitable for normal skin

Hanzl® Citrus (With coarse feel scrubbers) Rich lotion hand cleanser for very heavy soiling

features: – Removes oil, grease and general grime– Can be used without water– Contains 100% natural volcanic pumice

scrubbers for deep cleaning – Six premium skin conditioners– Fresh Lemon fragrance– Suitable for normal skin

code size

FT1505 4L Tank

Hanzl® Zipper (With coarse feel scrubbers)Rich lotion, special paint hand cleanser for very heavy soiling

features: – Removes paints, sealants, adhesives and

especially urethane based soils– Contains 100% natural volcanic pumice

scrubbers for deep cleaning – Five premium skin conditioners– Fresh Tropical Fruit fragrance– Suitable for normal skin

Hanzl® Advanced Soy™ (With coarse feel scrubbers)Environmentally friendly hand cleanser for very heavy soiling

features: – Removes oil, grease, inks and general grime– New innovative Soy-Based “Green” formula– Can be used without water– Contains 100% natural volcanic pumice scrubbers

for deep cleaning – Ten premium skin conditioners– Fresh Rain Forest fragrance– Suitable for normal skin

code size


code size


...powerful, economical

FT5000™ The Man-Sized Hand Cleaner System

FT5000™ H

and Cleaner Products

FT5000™ D

ispensers

T 0845 0700 624 F 0845 0700 623 E [email protected] W www.unisanuk.comT 0845 0700 624 F 0845 0700 623 E [email protected] W www.unisanuk.com

FT5000™ The Man-Sized Hand Cleaner System

FT5000™ Hand Cleaner Products

FOR WIPES

SEE PAGES

155 & 156

142 143


ygiene


ygiene

. ..if only hands could talk®

code size

DL5020 2L Plastic Dispenser

GOOD MANUFACTURINGPRACTICES COSMETICS

GMP All DUROL!NE® products are manufactured to GMP standards.This ensures very stringent pharmaceutical standards of production and documentation are adhered to.

code size

DL1015 100ml Tube

DL1020 1L Soft Bottle

code size


code size

DL1005 100ml Tube


Hanoprotect®All purpose skin protection cream

features: – Protects skin against both water and non water

based substances– Suitable for use on hands and body– Leaves no greasy after-feel– Light perfume, silicone free– Spreads easily, rapidly absorbed, based on a dual

protective mechanism– Suitable for normal and sensitive skin

Hanodual®Fingerprint free – With special new film forming agent

features: – Protects skin against both water and non water based substances– Ideal for precision engineering, plastics, electronics and

computer industries– Suitable for use on hands and body– Leaves no greasy after-feel– Light perfume, silicone free (perfume free also available)– Spreads easily, rapidly absorbed, based on a dual

protective mechanism– Suitable for normal and sensitive skin

Hano UV® Sun protection ointment for UV-A, UV-B and UV-C radiation

features: – Protects against exposure to sunlight and artificial

UV light from arc welding etc– Slightly greasy and lightly perfumed emulsion cream– Silicone free and offers highly effective sun

protection through its ray-filter– Sun protection factor 30– Suitable for normal and sensitive skin

Hanoglove® For under gloves and mechanical stress on the skin

features: – Reduces the formation of sweat and helps prevent

skin softening caused by airtight gloves or shoes– Improves the comfort of wearing protective clothing– Strengthens the outer layer of hard skin– Fingerprint free– Non perfumed and silicone free– Suitable for normal and sensitive skin

code size

DL1025 250ml Bottle


DU

ROL!N

E® Skin Care Protection Creams

DU

ROL!N

E® Dispensers


DUROL!NE® Dispenser System

features: – Dispenser for all skin protection, skin cleansing and skin care products

in the 1L and 2L soft bottle refills– Housing and back plate made from robust and high impact ABS and

polycarbonate plastic – With stainless steel lever and dosage control

DUROL!NE® Affordable Quality Skin Care

DUROL!NE® Skin Protection CreamsDUROL!NE®

Affordable Quality Skin Care

144 145


ygiene


ygiene

code size


code size


code size

DL1510 2L Soft Bottlecode size

DL2515 500ml Tub

code size

DL1505 2L Soft Bottlecode size


Hanolux® Hand cleansing paste for the removal of extra heavy industrial soiling

features: – A creamy paste that works superbly well against heavy oil and grease, metallic dust, graphite and carbon black found in garage workshops, foundries and general heavy engineering and industry– Contains natural rapeseed oil and biodegradable natural

cornmeal scrubbing agents– Particularly effective, yet gentle to the skin, thanks to its mild

surfactant system, soft scrubbing agents and reconditioning components

– pH-value supporting the natural acidic protective mantle of the skin– Solvent free with natural fragrance– Suitable for normal and sensitive skin

Kleen-it® Light duty all purpose gentle cleanser

features: – Mild cleansing lotion for the removal of light soiling.

For WC’s, general washrooms and showers– Gentle but very efficient cleansing– Can be used as a shower gel and shampoo– Light wood fragrance– Suitable for normal and sensitive skin

Hanolac® Special hand cleanser for removing paints and varnishes, resins, adhesives, tar and pitch

features: – Preservative-free and unperfumed hand cleansing, creamy

paste for very stubborn soils– With plastic scrubbing agents and dicarboxylic acid

esters as skin friendly solvents– Enriched with special surfactants and moisturising agents– Suitable for normal skin

Super Hanzl® Hand cleansing paste for the removal of medium to heavy industrial soiling

features: – Removes oily, greasy soiling and general dirt– For use in mechanical engineering, garages, workshops, metalworking, mining etc– Contains biodegradable natural cornmeal scrubbing agents

ensuring a thorough cleansing without damaging the skin– Contains a high level of moisturising agents to keep the skin conditioned– Solvent free with natural fragrance– Suitable for normal and sensitive skin

Hanoplus® Skin reconditioning cream with natural oils and beeswax

features: – Apply after each washing, during breaks and after work– Absorbs rapidly, leaves a pleasant after-feel– For hands and face– Helps natural skin regeneration– Lightly perfumed and silicone-free– Apply to clean and dry hands– Suitable for normal and sensitive skin

Hanosan® Mild anti-bacterial cleansing lotion

features: – For effective hand washing in food industries,

kitchens, clinics and hospitals etc– Without fragrance– Suitable for normal skin

Inko® Special hand cleanser for removing soiling with reactive and ionic dyes and inks

features: – Used to remove dyes and inks in printing works and

in the chemical, textile and leather industries– Slightly perfumed with micronized plastic scrubbing agents– Contains reducing agents and skin-friendly surfactants.

Enriched with moisturising agents to avoid the degreasing and drying of the skin

– Suitable for normal skin

code size

DL3005 100ml Tube


DUROL!NE® Skin Care After Work

DU

ROL!N

E® Skin Cleansers

DU

ROL!N

E® Skin Cleansers


Clocking in...

Always protect your hands beforework!

DUROL!NE® Skin Cleansers

Clocking out...

Always reward your hands after work!

DUROL!NE® Skin Cleansers

146 147


ygiene


ygiene

code size

ML1030 700ml Bag-in-Box

code size

ML5025 Module 1 Part Metal



b4 Work Cream®All purpose skin protection cream

features: – Cream for skin care for both before and after work– Helps protect against workshop and general industrial grime– Can be used to protect against both water and

non water based soiling– Helps to keep hands moist and supple when working – Suitable for use in the food industry– Without perfume– Suitable for normal and sensitive skin

All MULT!L!NE® products are fitted with non return vacuum valves to prevent bacteria from entering the product.

Hanofresh®Luxury, light duty, perfumed cleanser

features: – Luxury cream soap for normal light duty daily hand washing – Use after visiting the toilet, in offices and production facilities – Slightly perfumed– Suitable for normal skin

code size

ML1505 1.4L Bag-in-Box

Hanogel®Luxury hand disinfector gel

features: – 70% disinfection gel with reconditioner– For the effective removal of bacteria from the hands– Ideal for workshops working with recycling and waste

vehicles and other situations where high standards of hygiene are required


code size

ML1550 1L Bag-in-Box

MULT!L!NE®Luxury Heavy Duty Skin Care


GMP All MULT!L!NE® products are manufactured to GMP standards.This ensures very stringent pharmaceutical standards of production and documentation are adhered to.

MULT!L!NE® Dispenser System

features: – A flexible, hygienic and reliable dispensing system– Very strong smoked polycarbonate cover with ultra strong

aluminium back plate– Modules 1 to 3 suit all MULT!L!NE® products– Pumps can be removed in seconds for cleaning or replacement

MULT!L!NE® Luxury Heavy Duty Skin Care

MU

LT!L!NE® Products

MU

LT!L!NE® D

ispensers


...high performance for healthy skin

WHEN ONLY THE

BEST WILL DO

SCANDINAVIAN

MARKET LEADER

MULT!L!NE® Skin Protection Cream

MULT!L!NE® Light Duty Cleansing

148 149


ygiene


ygiene

code size

ML20VA 700ml & 1.4L

code size

ML20VB 700ml & 1.4L

Hanopro® Special Starter Pack

features: Module 3 Dispenser containing:– 1 x b4 Work Cream® – Before Work,– 1 x Hanopro® – Luxury Super Heavy Duty Hand Cleanser,– 1 x Hanocura® – After Work Cream

Hanosol® Special Starter Pack

features: Module 3 Dispenser containing:– 1 x b4 Work Cream® – Before Work,– 1 x Hanosol® – Medium to Heavy Duty Hand Cleanser,– 1 x Hanocura® – After Work Cream

Hanozip® Special Starter Pack

features: Module 3 Dispenser containing:– 1 x b4 Work Cream® – Before Work,– 1 x Hanozip® – Special Paint Hand Cleanser,– 1 x Hanocura® – After Work Cream

Hanopol® Special Starter Pack

features: Module 3 Dispenser containing:– 1 x b4 Work Cream® – Before Work,– 1 x Hanopol® – Super Heavy Duty Hand Cleanser,– 1 x Hanocura® – After Work Cream

code size

ML20VC 700ml & 1.4L

code size

ML25VD 700ml & 1.4L

Compact System Starter Packs

features: – All starter packs come complete with 3 different product refills,

wall fixings and instructions– All packs include b4 Work Cream® and Hanocura® – before and

after work refills and a hand cleaner refill of your choice– Dispensers are very durable and robust. Ultra strong

polycarbonate fronts and metal back plates. All parts are lifetime guaranteed

– Pumps can be removed in seconds for cleaning or replacement– Very neat compact system. Ideal for any washroom, where space

is limited or in vehicles– Fitted with non return vacuum valves to prevent bacteria from

entering the product– Starter packs can be returned for a full refund if you are not

completely satisfied

concentrated formula: – Add your own water instead of paying for it in your hand cleaner

– very low cost per wash– Tested in extremes of cold weather in Scandinavia and comes top

every time!

code size


code size


code size


code size


Hanosol® Medium to heavy duty hand cleansing paste

features: – Naturally powerful cleansing paste

based on vegetable oils, solvent free– Effectively and gently removes oil,

oily dirt and general dirt– Contains rubber scrubbing agents

for safe and deep cleaning action– Suitable for normal and sensitive skin

Hanopro®Luxury super heavy duty hand cleansing paste

features: – Removes very heavy workshop and

industrial grime– Removes even the toughest dirt (such

as diesel and hydraulic oil, oil mixed with soot or metal dust)

– Contains rubber scrubbing agents for safe and deep cleaning action

– Contains extra conditioners to help moisturise the skin


Hanopol®Super heavy duty hand cleansing paste

features: – Very effective for heavy workshop

and industrial grime– Removes even the toughest dirt (such as diesel and hydraulic oil,

oil mixed with soot or metal dust)– Contains rubber scrubbing agents

for safe and deep cleaning action– Suitable for normal skin

Hanozip® Special paint hand cleansing paste

features: – Removes paints, sealers and adhesives –

ideal for paint shops– Contains rubber scrubbing agents for safe

and deep cleaning action– Contains extra conditioners to help

moisturise the skin– Suitable for normal skin

MU

LT!LINE® Com

pact System Starter Packs

MU

LT!L!NE® Skin Cleansers


MULT!L!NE® Skin Care Cream For After Work

code size

ML3015 700ml Bag-in-Box

Hanocura® Skin reconditioning cream

features: – Skin care cream for after work, gives superb feeling to skin– Lightly perfumed regenerating skin care cream for hands and face– Helps prevent dry and cracked skin – Absorbs quickly and has good soothing and caring effect– Suitable for use on normal and dry skin

MONEY BACK

GUARANTEED!

MULT!L!NE® Compact System Starter PacksMULT!L!NE®

Skin Cleansers

150 151


ygiene


ygiene

code size

SL1525 500ml Bag

SL1530 1L Bag

code size

SL1570 1L Bag

code size

SL1515 1L Bag

code size

SL5000 Electric Dispenser for 1L Bag

SL5001 Aluminium Stand c/w Electric Dispenser

code size

SL1010 500ml Bag

Hanofresh® Luxury, light duty, perfumed cleanser

features: – Luxury, creamy liquid cleanser for

general hand washing – Slightly perfumed– Suitable for normal skin

b4 Work Cream®All purpose skin protection cream

features: – Skin care cream for before and after work– Helps protect against general dirt and

grime– Helps to keep hands moist and

supple when working– Without perfume– Suitable for normal and dry skin

Hanogel®Luxury hand disinfector gel

features: – 70% disinfection gel with reconditioner.

For the effective removal of bacteria from the hands

– Helps reduce cross infection of germs from the hands to other people and surfaces


Hanowash® Light duty, fragrance free gentle cleanser

features: – Creamy, natural liquid cleanser for

general hand washing– Colourless and perfume-free– Awards won for natural ingredients

and skin compatibility – Suitable for normal and dry skin

SL!ML!NE® Touch-less Electric DispenserAutomatic dosing and touch free operation

Now it’s easy to improve hand hygiene! Create new habits at work….

features: – Reduce absence due to sickness by improving hand hygiene – Hands are the most common source of infection, you can now

break the chain of infections with the right tools– Use soap or disinfector or preferably both in the new electric

dispenser. Quick and easy to use for busy people– Elegant and easy to clean, dispenser comes apart very easily

for quick servicing and cleaning– AA batteries will last approx 1 year of frequent hand washing– Stand can be personalised with your own message or

company logo – POA– Stylish aluminium floor stand complete with Touch-less

Electric Dispenser also available

SL!ML!NE® Luxury Light Duty Skin Care

SL!ML!N

E® Skin Care System

SL!ML!N

E® Dispensers


SL!ML!NE® Dispenser System

features: – Available in tough plastic with capacity for either

1L or 500ml products – Very hygienic and beautifully designed– Level of refill is clearly visable through side panel– Bag empties completely – no waste– Environmentally friendly with reduced packaging– Easy to dismantle for cleaning and are dishwasher safe– Refills fitted with non return vacuum valves to prevent

bacteria from entering the product – Offers an optimum hygiene solution for professional users – Use in the food industry, hospitals, nursing homes, offices,

kitchens and toilets

code size

SL5005 Dispenser for 500ml Bag

SL5010 Dispenser for 500ml Bag, with Elbow Lever

SL5025 Dispenser for 1L Bag

SL5030 Dispenser for 1L Bag, with Elbow Lever

SL5045 Wire Dispenser for 500ml Bag

SL5050 Wire Dispenser for 1L Bag


GMP All SL!ML!NE® products are manufactured to GMP standards.This ensures very stringent pharmaceutical standards of production and documentation are adhered to

SL!ML!NE®Luxury Light Duty Skin Care

Moveable floor stand that can be placed to maximise infection control where it’s most needed!

...elegance and innovation hand in hand

SL!ML!NE® Skin Care System

152 153


ygiene


ygiene

Hanzl® Ultra Hand Cleaner WipesHigh quality rough scrubber textured wet wipes

features: – Removes very heavy soils of tar, grease, wet paint, ink etc.– Great for vehicles in case of emergencies like tyre changes,

diesel or petrol splashes and oil checks etc.– Help keep offices clean – no more dirty finger marks!

Hanzl® Wipes Wall Bracket Allows wipes to be mounted inside vehicles, on workshop or office walls. Ideal for welfare facilities, service and transport vehicles

features: – Very heavy duty stainless steel– Use with Power, Ultra and Max Wipes

code size

WP3510 90 Per Tub

code size

WP5011 Wall Bracket

Save time & money, clean up on the job

features: – Versatile enough to clean hands, tools and equipment– High quality waterless system, acts like a mobile sink– Specially patented surface ensures dirt stays on wipe– Unique lid design ensures towels stay moist– Power and Ultra Wipes – low VOC, solvent free, environmentally safe formulation– Strong towels loaded with premium skin conditioners. Fresh citrus fragrance

Hanzl ® H

and Cleaning Wipes

Hanzl ® H

and Cleaning Wipes


HANZL®Hand Cleaning Wipes

the professionals choice, keep clean on the move

On the road In the office Quick & easy!

Hanzl® Power Hand Cleaner Wipes High quality silky textured wet wipes

features: – Removes heavy soils of tar, grease, wet paint, ink etc.– Great for vehicles in case of emergencies like tyre changes,

diesel or petrol splashes and oil checks etc.– Helps keep offices clean – no more dirty finger marks!

Hanzl® Max Hand Cleaner WipesHigh quality rough scrubber textured wet wipes

features: – Removes very stubborn soils of paint, adhesives,

urethane sealers, mastics, oil, ink and grease etc.– Great for paint shops, printers, builders, window and

car windscreen fitters– Don’t let paints and sealers stay on your skin – they

can cause serious diseases!

code size

WP3505 90 Per Tub

code size

WP2505 90 Per Tub

HANZL® Hand Cleaning Wipes

154 155


ygiene


ygiene

code size

BW1505 5L Bottle

BW5003 Pump Dispenser for 5L Bottle

code size

BW3540 200 per Tub

BW3530 500 per Bucket

BW5001 Wall Bracket – BW3540

BW5002 Wall Bracket – BW3530

code size

BW2010 10L Bucket

Big Wash® SoapLight duty, liquid hand soap

features: – A very mild, creamy skin cleanser– Intended primarily for cleansing, freshening and sanitary

washing applications, such as office buildings, educational institutions and the hotel and catering sector

– Skin-friendly tensides content yields a fine-pore, creamy foam with a gentle cleansing action

– Contains lipid enhancing and care substances which keep the skin soft and supple

– Big Wash Soap is pink in colour, with a light, discreet fragrance

Big Wash® Hand Cleanser BucketHeavy duty, value hand cleanser

features: – 10L bucket gives Big Value for money– Removes heavy soils such as oil, grease and general grime– Contains scrubbing agents for a deep clean– Contains conditioning agents and is pH Neutral– No Petroleum Solvents – Dermatologically tested

Big Wash® Big Value Heavy Duty Wet Wipes

features: – Big budget wipes – 175 per bucket– Removes heavy soils of tar, grease, paint, ink etc.– Versatile enough to clean hands, tools and equipment– Strong towel with clean citrus fragrance– Low VOC, solvent free environmentally friendly formulation– Graffiti wipes also available – POA

Big Wash® Disinfector Wipes

features: – Hands, surface and equipment disinfector wipes– Great for sanitizing keyboards, desks, door handles– For use in all critical areas such as food preparation, healthcare,

schools/colleges, offices, receptions etc– Kills bacteria and viruses, such as E Coli, Salmonella, Swine Flu

and MRSA

Sight is one of our most important senses

If an accident occurs, a few seconds may determine whether you lose your sight or not. Rapid access to iWash® is therefore decisive at all workplaces where there is a risk of eye injury

This applies more importantly to injuries caused by acid or alkaline substances, as caustic burning begins as soon as the substance comes into contact with the eye

But time is also important in connection with injuries caused by metal and wood particles, dust and dirt, for example. In these situations using iWash® immediately can prevent foreign bodies from sticking to the eye and causing serious injury

The iWash® system provides rapid, hygienic help in any working situation

The system was developed to make it easy for you to rinse your eye. Two simple movements and the bottle is ready for use. The ergonomic eye cup ensures easy direct rinsing and leads the fluid away from the eye after rinsing. Clear instructions on the bottles help you to use iWash® correctly and safely

iWash® contains a sterile sodium chloride solution (0.9%), corresponding to the eye's natural fluid. This rinses the eye gently and prevents further eye contamination. For injury caused by chemicals we recommend our eyeVolution®, which is a sterile phosphate buffer solution that rapidly and gently neutralises the fluid in the eye to its normal pH-level of 7.4

A wide range of products ensures you have an optimum solution to suit your needs – and includes stations of different sizes for wall-mounting in workplaces, as well as small units to put into vehicles, toolboxes and first-aid kits, or in a special belt bag

iWash® Introduction

BIG W

ASH

® Big Value Products


Big Value Products

code size

BW3500 175 Per Bucket

...a few seconds may be decisive

PULL TWIST WASH OR SQUEEZE

New Double iWash®

Now you don't have to decide which eye to save first!

see page 160

156 157


ygiene


ygiene

Saline iWash® For general eye soiling

features: – 5 minute rinse time on 500ml size compared with just

20 seconds on most competitors bottles giving you ample time to remove foreign bodies

– Very cost effective because less bottles are used to properly wash the eye – 0.9% sterile sodium chloride solution – Suitable and recommended for accidents to the eye involving foreign bodies (not chemicals). Complete with an ergonomic eye cap, a dust cap and clear instructions – Durability and shelf life of 3 years from date of manufacture – Bottles are CE marked. Complies with Medical Directive EEC 93/42/EEC (Class 1 sterile) – For refilling eyewash stations or for use alone – Handy compact 200ml bottle can easily be kept in a vehicle, toolbox, first aid kit or belt bag

Washing/rinsing time: – 200ml bottle gives 2 minutes washing/rinsing time– 500ml bottle gives 5 minutes washing/rinsing time

Emergency iWash® StationsWall mounted

features: – Easily installed close to the workstation – Equipped with mirrors and pictograms to ensure rapid, correct

rinsing in the event of an accident – Only three quick and simple actions required to enable use

of the product in an emergency – Open or dustproof stations are available– Dustproof station is very strongly constructed, made from the

same material used in crash helmets– Stations with 2 x 500ml saline iWash® give approximately

10 minutes rinsing time– Dustproof station is fully mobile – take with you anywhere!

code size

IW4510 Saline 200ml Bottle

IW4515 Saline 500ml Bottle

IW5061 Belt Bag for 200ml Saline & eyeVolution®

code size

IW4605 eyeVolution® 200ml Bottle

IW4610 eyeVolution® 1L Shower Station

IW4615 eyeVolution® 1L Shower Station Refill

code size

IW4525 Open station with 2 x 500ml Bottles Saline (Do not install in dusty areas)

IW4530 Dust Proof Station with 2 x 500ml Bottle Saline

IW5062 Wall bracket – for all types and sizes

eyeVolution®Emergency eyewash and body shower with neutralising effect of up to 50 times more effective than ordinary water.

features: – Rapid and effective neutralising agent for acids and alkalis in

the eye or on the skin – 1 litre bottle has the same effect as 50L of normal tap water

– Immediate application could prevent permanent damage to the eyes, acids and alkalis can penetrate the cornea in just45 seconds!

– Powerful 4.9% phosphate neutralising buffer which is not harmful, as these phosphate salts are already found in the body

– Could make the difference between losing or saving your eyesight!– Could reduce time at hospital and time off work, thus saving money– Tested and approved by doctors and eye specialists– Long rinse time of 2 minutes (200ml) gives user plenty of time

to treat both eyes and skin. 1L gives 2 minutes wash time

Don’t risk this!!!This is the result of an over-charged battery! Most competitor eyewash bottles will only rinse for 20 seconds, as the graph shows. You could use two of their bottles on one eye and still not neutralise your eye completely! What about your other eye and your skin...?

Does this graph make you feel safe using your current eyewash?

Effective rinsing time of the eye (seconds)

pH le

vel o

f the

eye

Neutralisation of Strong Acid and Alkali in the Eye

Rinsing Acid with standard SalineRinsing Acid with eyeVolution®

Rinsing Alkaline with standard SalineRinsing Alkaline with eyeVolution®

Key

Normal pH level of the eye

eyeVolution® & First A

id Plan

Saline iWash® Products

...simplicity, safety, flexibility


Alkaline pH

Acid pH

14

12

10

8

6

4

2

0

1 5 9 13 17 21 25 29 33 37 41

First Aid Plan for Eye and Skin Injuries

substance eye wash type continuous rinsing rinsing time

Foreign bodies such as dust, dirt, metal and wood chips etc.

iWash® iWash® Rinse until the foreign body has been rinsed out.

Acids eyeVolution® iWash® Rinse for approximately 2 minutes with eyeVolution® and continue rinsing with iWash® until you reach a doctor.

Alkalis eyeVolution® iWash® Rinse for approximately 2 minutes with eyeVolution® and continue rinsing with iWash® until you reach a doctor.

Other Chemicals iWash® or eyeVolution® iWash® Rinse until the inconvenience disappears or until you reach a doctor.

Chemicals on your skin eyeVolution® iWash® Rinse until the inconvenience disappears or until you reach a doctor.

Saline iWash® Products

FOR NEW

WOUND

CARE BRUSH

SEE PAGE 164

158 159


ygiene


ygiene

Double iWash® Solutions

Many eye accidents involve both eyes. Dust, dirt, chemicals and other harmful substances can enter the eye tissue within seconds and in the worse case lead to serious eye injuries

The new Double iWash® sets new standards for first aid eye wash bottles by offering the ability to rinse both eyes at the same time – without losing valuable time! Double iWash® is therefore a necessary complement to your current eye wash system, and helps to create an even higher standard of safety in your workplace. Double iWash® rinses with a gentle even flow, washing away the damaging substances away from the eyes. The registered design of the eye device on the bottle helps to keep the eyes open during rinsing

Washing/rinsing time: – 500ml bottle gives 2 minutes washing/rinsing time– 1L bottle gives 5 minutes washing/rinsing time

code size

IW4535 1 x 500ml Double eyeVolution® & 1 x 1L Double iWash®

Double iWash® Dustproof Station

features: – Dust-proof wall station – Contains 2 x 1L Saline Double iWash®,

pictogram on the front side and a mirror inside the lid

– Especially suitable for dirty and dusty production areas

– Fully mobile – take with you anywhere!

Double iWash® Mixed Dustproof Station

features: – Dust-proof wall station – Contains 1 x 500 ml Double eyeVolution®

and 1 x 1L Double iWash®, pictogram on the front side and a mirror inside the lid

– Especially suitable for dusty production areas where there is a risk of eye injuries involving acids and alkali

code size

IW4532 1L Double iWash®

QuickFIX Plasters

Double iW

ash® System

Double iWash® System

code size

IW4520 1Lcode size

IW4616 500ml

Saline Double iWash®

features: – Sterile 0.9 % Sodium chloride solution– For injuries with foreign bodies like dust,

dirt etc– Complete with an eye device for rinsing

both eyes at the same time– Also for refilling of the Double iWash®

stations

Double eyeVolution®

features: – Sterile 4.9 % Phosphate buffer solution – For neutralising of most acids and

alkalis– Complete with an eye device for

washing both eyes at the same time– Also for refilling of the Double iWash®

station

QuickFIXImmediate Access – Rapid Application

The unique dispenser is the backbone of the system

First-aid boxes are fine when a serious accident occurs, but there are hundreds of minor accidents at workplaces every day. Most of them only involve putting a plaster on a small cut – so you can go back to work straight away. The system is hygienic, simple, and always at hand. Apply a plaster and back to work

features: – Provides a remedy for most accidents rapidly, easily, and

hygienically– Can be operated with one hand– Can be filled with different types of plasters as required– Easy to see when the dispenser is empty– Easy to stop bleeding – without soiling the other plasters – Small dimensions make it easy to fit into virtually any space – Contains a shelf for storing first-aid items– Plasters are individually packed– Can be locked so it can only be opened with a key

Made the right way up!

Do you take a plaster from the top of your current dispenser? What happens when blood spills onto other plasters? With QuickFIX you can stop bleeding without soiling the other plasters, because plasters are dispensed from the bottom of the dispenser

PULL

READY TO APPLY

BACK TO WORK


QuickFIX Plasters

NEW

...ultimate eye safety!

160 161


ygiene


ygiene

QuickFix Mini Dispenser

Searching for a plaster can be difficult and time consuming, especially when working in situations where there is no first aid kit. The small and practical dispenser easily fits into tool boxes, glove compartments and other small areas. Ideal for a jacket or bag when on the move

Mixed Plaster DispenserThe Mixed Plaster Dispenser combines both the water resistant and elastic plasters

Water-resistant plasters are especially suitable for damp workplaces. The plasters are made of a protective, skin-friendly PE material that allows the skin to breathe

Elastic textile plasters that conform to the movements of the skin so they are comfortable in use. The plasters are extremely skin-friendly and allow the skin to breathe

Detectable Plaster Dispenser

Sterile, highly visible blue plasters with built-in metal surface that can be traced by a metal detector. The plasters are made of a PE material that allows the skin to breath and is also waterproof and skin-friendly. For use in food industry environments, or other areas where a detectable plaster is desirable

code size

FA5092 QuickFix Plaster Dispenser, including two Detectable Plaster Refills

FA7015 QuickFix Detectable Plaster Refill – 45 Plasters

code size

FA5093 QuickFix Plaster Dispenser, including 1 x Water Resistant and 1 x Elastic Refills

FA7005 QuickFix Water Resistant Plaster Refill – 45 Plasters

FA7010 QuickFix Elastic Plaster Refill – 45 Plasters

code size

FA7020 QuickFix Mini Plaster Dispenser, including one Elastic Plaster Refill

First Aid Plasters

QuickFIX Plasters

Plasters

code size

FA7040 100 per Pack – 75mm x 25mm

FA7041 100 per Pack – Assorted

code size



code size



code size



Premium Fabric Plasters

features: – A premium hard-wearing dressing with extra strong adhesive – Recommended where a maximum long wearing durable plaster

is required. – Hypo-allergenic– The open weave fabric allow skin to breathe as it heals– Assorted Dressing pack contains 6 different sizes or a pack

containing 100 – 75mm x 25mm plasters

Washproof Plasters

features: – Flesh coloured range of washproof, breathable dressings– With a strong latex free adhesive– Hypo-allergenic– Assorted Dressings pack contains 6 different sizes or a pack


Latex Free Plasters

features: – Recommended for sensitive and delicate skin types– Super comfort plasters which are elastic and conform easily

to the skin surface, stretching with it to give increased security and comfort

– This range of plasters includes soft cushioned non-stick pads for comfort, cleanliness and easy removal

– The open weave fabric allows skin and wound to breathe as it heals– Assorted Dressing pack contains 6 different sizes or a pack


Transparent Dressings

features: – A transparent, aesthetic film blending with every skin colour – Provides a waterproof barrier for your wound, making it an ideal

choice for all general applications– Dressings contain specifically selected unique materials that

bend, stretch and conform to different shapes and forms Helps freedom of movement

– Hypo-allergenic– Assorted Dressings pack contains 6 different sizes or a pack


First Aid Plasters

T 0845 0700 624 F 0845 0700 623 E [email protected] W www.unisanuk.comT 0845 0700 624 F 0845 0700 623 E [email protected] W www.unisanuk.com162 163


ygiene


ygiene

First Aid Kits

First Aid Products

First Aid KitsFirst Aid Products


code size qty/pack

FA7065 30g Tube 6

Economy Detectable Blue Plasters

features: – Economy plaster for use within the food

industry– These plasters are waterproof, latex-free,

conformable and have a strong hypo-allergenic adhesive

– Metal detectable– Assorted Dressing pack contains 6

different sizes– Boxed in quantities of 100 plasters

Premium Detectable Blue Plasters

features: – A premium latex free, hypo-allergenic plaster– Made with the ultimate in film technology,

providing a bacterial barrier which resists the ingress of water, oil and grease

– Have the ability to be detected where metal detection equipment is operational

– Recommended for food industry – Assorted Dressings pack contains 6

different sizes

Savlon Antiseptic Cream

features: – Gently soothes and helps to prevent

infection– Aids the natural healing of minor skin

disorders

code size



code size



Alcohol-free Cleansing Wipes

features: – Alcohol free cleansing wipes for

removal of dirt and debris from minor skin abrasions and cuts, prior to the application of dressings

– Wipes are individually wrapped and packaged in a dispenser pack

code size

FA7060 Dispenser Box – 100 wipes

Standard HSE First Aid Kit

features: – Supplied in a robust green case– Compliant with HSE recommendations – 1, 10, 20 and 50 person kits available– HSE First Aid Kit Refills are available – see below, listed under

Deluxe HSE kits

Standard Catering HSE First Aid Kit

features: – Supplied in a robust green case– With HSE compliant range of dressings and include blue plasters

and gloves to comply with food hygiene regulations– 10, 20 and 50 persons kits available– Catering HSE First Aid Kit Refills are available

code description person

FA8010 Standard HSE First Aid Kit (Green Case) 10




FA8002 Standard HSE First Aid Kit (Zip Pouch) 1

FA8003 Standard HSE First Aid Kit (Bum Bag) 1

FA5020 Wall Bracket n/a


FA8015 Deluxe HSE First Aid Kit (Green Case) 10



FA8100 HSE First Aid Kit Refill Kit 10





FA8020 Catering HSE First Aid Kit (Green Case) 10



FA8103 Catering HSE First Aid Refill Kit 10




Deluxe HSE First Aid Kit

features: – Manufactured from shatterproof plastic with water

and dustproof seals– Kits are divided into two compartments with plastic

covers and dividers– Supplied with standard HSE filling – 10, 20 and 50 person kits available– HSE First Aid Kit Refills are available

code size qty/pack

FA8080 200ml Bottle 6

Quick Wash’n’Brush Wound Cleanser

features: – For rinsing and cleaning of superficial wounds, scratches and abrasions– With integrated brush top for removing any fixed debris in the wound– Helps to facilitate the healing process and prevent infections– Sterile 0.9% Sodium Chloride solution– Small handy 200ml bottle – ideal for first aid kits, cupboards,

car glove-boxes and tool boxes etc

164 165


ygiene


ygiene

First Aid Products

First Aid Kits

First Aid Products


First Aid Kits

Deluxe Catering HSE First Aid Kit

features: – Supplied in a high quality, shatterproof case with a bulkhead

wall bracket– With HSE compliant range of dressings and include blue plasters

and gloves to comply with food hygiene regulations– 10, 20 and 50 persons kits available– HSE first aid kit refills are available

Aeroburn Products

features: – Aeroburn products are for first aid use on injuries including burns,

cuts, scrapes and abrasions– Using a unique formulation providing a stable gel system, Aeroburn

gel relieves pain by cooling the burn injury, stopping the burning process and minimising the burn depth.

– Water soluble, these products are easily removed for debridement– These products are also available as a small first aid kit

code size person

FA8025 Deluxe Catering HSE First Aid Kit 10






code size person

FA8030 Premium Catering & Burns HSE First Aid Kit (Blue Case)

10

FA8031 Premium Catering & Burns HSE First Aid Kit (Blue Case)

20


code size

FA8050 Aeroburn Sterile Gel Dressing 50 x 150mm




FA8054 Aeroburn Single Dose Sachet 3.58g – Box of 20

FA8055 Aeroburn Squeeze Bottle 59ml

FA8056 Aeroburn Small Burn First Aid kit

Premium Catering and Burns First Aid Kit

features: – Catering and burns kit content is food hygiene compliant– Supplied in aesthetically attractive robust case with wall bracket– Includes catering and burns kit content to provide a more

comprehensive first aid kit provision for your employees– 10 and 20 person kits available

First Aid Cupboard

features: – Manufactured from high quality steel– With instantly recognisable identification symbols– Powder coated with white Germ Guard anti-bacterial paint– ‘No-snag’ handles, with 2-point locking– Designed to meet a wide range of first aid requirements – c/w 3 shelves code size (w x d x h) mm

FA8200 350 x 300 x 700

FA8201 900 x 460 x 1800

Roll Door First Aid and Medicine Cabinet

features: – A compact and practical solution thanks to the roll down door –

ideal for where space is limited– Epoxy powder coated body – PVC roll down door with reinforced galvanised steel handles– Lockable with a key-type lock– Includes 4 green transparent, height adjustable plastic shelves

code size (w x d x h) mm

FA8203 495 x 150 x 600

Two Door First Aid and Medicine Cabinet

features: – Ideal for site and occupational health nurses/first aid rooms– Designed with the help of doctors and nurses– 2 door with magnetic catch and lock– With 5 green transparent shelves in door and 6 adjustable

shelves in main compartment


FA8202 520 x 200 x 540

166 167


ygiene


ygiene

code size

EN6585 40 Blocks

code size

OD5505 240ml Finger Spray

OD5511 500ml Trigger Spray (empty)

Urinal Bio Blocks

features: – Powerful 3-in-1 action, deodorises, cleans

and helps prevent blockages in urinals– Rapid cleaning action degrades organic

deposits of urine salts– Awesome fresh citrus fragrance– Helps reduce ongoing maintenance costs– Eliminates the source of bad smells

Odel® 240ml & 500ml

code size

OD5540 1L Flip-Top Bottle

code size

OD5525 240ml Finger Spray


code size


OD5515 5L Bottle

OD5520 20L Bottle

Odel Zyme®Get to the source naturally

features: – Ideal for areas where you cannot easily clean– Suitable for under carpets, floors, behind radiators, cracks around toilets, urinals and showers, drains and septic tanks– Special enzyme formulation digests decaying organic matter– Helps eliminate bacteria that cause

offensive odours, contains pleasant floral fragrance

Odel® Special Starter Pack

features: – 5 x Odel® 1L– 5 x OdelZyme® 1L– 1 x Prodel® 1L– 1 x Odel® 500ml Trigger Spray (empty)– 1 x Prodel® 240ml Finger Spray

Prodel®For when all else fails

features: – Eliminates extreme odours arising from

malodorous wounds, decaying matter, sanitary bins etc

– Extremely powerful odour control for hospitals, hospices, post mortem departments, A&E areas, disaster areas

– Ultimate odour control in hot climate conditions

Odel® Odour EliminatorEnriched with natural essential oils

features: – Ideal for areas where you have easy

access for cleaning– Eliminates pungent odours from flatulence,

urine, faeces, sweat, vomit, rotting food, mildew, smoke, soiled laundry and replaces them with a superb aroma

– Used in hospitals, nursing homes, schools, clinics, hotels, vets, offices, vehicles, boats, bedpans and portable toilets etc

– Stops wet floor odours from smelly mops– Use in carpet cleaning machines, mop

buckets and on general surfaces to create a fragrant and fresh ambience

– Easy to use, safe, biodegradable and environmentally friendly

Pump Sprayers &

Foggers

OD

EL® Odour Control/U

rinal Blocks

Pump Sprayers & Foggers


Odour Control

Odel eliminates virtually any offensive odour... anywhere!code size

SP5235 8L Sprayer

Deluxe Industrial Sprayer

features: – Heavy duty blow moulded tank – One hand operation convenience – Strong stainless steel pump rod– Brass adjustable nozzle adjusts from

pin stream to 60 degrees cone

uses: Pest control, general industrial applications

General Liquid Sprayer

features: – Strong high density polyethylene tank– Unique funnel neck allows easy filling

with no splashing of liquid– Adjustable nozzle from a fine mist to

a coarse jet– Strong metal pump rod– Acid sprayer version available

uses: Most industrial cleaning and degreasing chemicals, etc

code size

SP5230 2L Sprayer

code size

SP5225 1L Sprayer

Industrial Sprayer features: – Adjustable for spraying or foaming– 2 Litre bottle capacity – Made of heavy-duty polyethylene – Viton seals ensure wide chemical

resistance

uses: Car cleaners, food processing plants, care homes, dairies (fly repellent), slaughter houses, showers, toilets, industrial, agricultural etc

2600 Flexi Fogger 18 & 48

features: – A versatile and mobile, mist fogger for

indoor and outdoor use – Made from rustproof and rugged

copolymer resin– 18” or 48” hand held hose for spraying

large areas– 6 Litre capacity with output of 0–270ml

per minute– Suitable for water and oil based materials uses: Disinfectants, pest control, flying insects, odour control, sanitizers and humidity control

Stainless Steel Boot and Shoe Cleaner

features: – Enables practical, effort-saving, quick and

thorough cleaning of your boots– Ideal for waste and recycling sites,

sewage works, food factories, mines etc– Equipped with 3 fixed and one moveable

brush with water connection (½”)– Made from heavy duty stainless steel.

Model shown has optional collection tray

code size

SP5245 Mini Fogger

code size

SP5255 2600 Fogger (18" Hose)

SP5260 2600 Fogger (48" Hose)

code size

BC6400 Boot & Shoe Cleaner

BC6401 Boot & Shoe Cleaner – with collection tray

Mini Fogger

features: – Easy to fill translucent tank– Corrosion resistant – Nozzle can atomize both oil-based and

water-based fluids– 1 Litre capacity with output of 0-120ml

per minute

uses: Odour control, pest control, humidifying, disinfecting, smoke odours, care home odour control, pesticides and sanitizers

code size

OD55VA Starter Pack

IDEAL FOR

SMELLY BINS...

168 169


ygiene


ygiene

All Purpose Cleaner And Degreaser

greenO clean® differs from other cleaning materials by having a very high amount of active ingredients. Even with a relatively low dose a very effective result is achieved. The fact that greenO clean® is so concentrated makes it very economical

greenO clean® is biodegradable and because of that it is very environmentally desirable. The product has been tested and approved to be discharged into drains, purifying plants and into the sea or lakes (please check with your local water authority). For the same reason greenO clean® can be used for all kinds of cleaning situations with a clear conscience. Also the low dosage helps take care of our environment

greenO clean® is an effective multi-purpose product. It helps to save you money as you do not need multiple cleaning products for different purposes

Applications:– Machines, motors and parts– Workshops and factory floors and walls– Steam cleaning and metal degreasing plants– Manual cleaning, dipping and soaking– Cars, trucks, buses, trains and ships– Off-shore drilling rigs– Equipment in food and graphic industries– Windows and glass

R

code size

GR6510 5L Can

GR6520 200L Drum

greenO clean® Products

greenO clean®


greenO clean® Environmentally Friendly Cleaner & Degreaser

greenO clean® Intensive Jet-wash CleanerAn extremely environmentally friendly, economic and efficient cleaner for high pressure steam-cleaning and jet washing. With special phosphate-free cleaning additive for washing car/van paintwork, steel, non-ferrous metals, painted surfaces and some light alloys

features: – Quickly and effectively removes oil, fat and mineral-based

impurities and is extremely material-friendly– For heavy industrial use, manufacturing, engine cleaning,

degreasing and textile cleaning up to 100oC– The product is very environmentally friendly and contains

tensides that are biologically degradable– Suitable for use in food industry– Has rapid separating characteristics and does not

influence oil separation systems

Heavy Duty Standard Floor CleanerLow foaming environmentally friendly floor cleaner for removal of heavy soiling of fat, grease etc. Use manually in mop buckets or with floor cleaning machines in large areas

features: – Use on cement floors, concrete, uncoated epoxy resin and

polyurethane flooring. Ideal for large warehouse floors or general production areas

– Moderate alkaline and can be used also on alkaline sensitive surfaces like linoleum

– Excellent for removing tyre marks from vehicles and forklifts and removes old wax and polymer coatings

– Extremely economical – 1L at 1% will clean a soiled floor area of 1000m2 when using a floor cleaning machine

greenO clean® PlusAn extremely environmentally friendly, economic and efficient cleaner with natural soap for use in floor cleaning machines and high pressure parts washers/cleaning machines. Low foaming additive for removing stubborn stains of oil, grease, soot and lubricants in industrial and workshop areas

features: – Multiple uses. Expertly cleans workshop floors, engines,

wheels, chassis and all alkaline-resistant surfaces– Suitable for automated floor cleaning. Also for surface and

parts cleaning with high pressure cleaners. Ideal for soaking oily or dirty parts. Can be used in mop buckets for floor cleaning

– High level of active ingredients promotes rapid streak-free drying of the cleaned surfaces. Can be used up to 80oC

– Has rapid separating characteristics and does not influence oil separation systems

Train and Truck WashHeavy duty acidic pre-treatment agent with corrosion protection for use in automated commercial vehicle and train washing systems and in high pressure jet washers. Foaming additive for the cleaning of trucks, construction vehicles, plant machinery and trains

features: – Removes contaminates like plaster, cement, lime and concrete– Ideal for use on aluminium and stainless steel, quickly restores

their shine– Effectively removes soiling of rust, grease, oil, insects, heavy

grime and bird droppings etc.– Has rapid separating characteristics that does not influence oil

separation systems– Biodegradable and free from Hydrochloric and Hydrofluoric acid


GR6511 greenO clean® Plus 10L


CP6502 Heavy Duty Standard Floor Cleaner 10L

CP6503 Heavy Duty Standard Floor Cleaner 200kg


CP6501 Train & Truck Wash 10L

greenO clean® Products


GR6512 greenO clean® Intensive Cleaner 10L

GR6513 greenO clean® Intensive Cleaner 200kg

170 171


ygiene


ygiene

The HURRICANE is a powerful and versatile electric flying insect killer. It is of particular value in rural areas, breeding farms and stables. In these environments, the use of chemical insecticides or pesticide equipment that release gaseous substances could damage crops or the health of the animals and workers

The HURRICANE on the other hand, uses the attractive action of its UV lamps on the flying insects. As they are drawn nearer to the light source of the machine, they get sucked into the front window by the super powerful electric motor. They are then deposited into the lower part of the appliance, where they cannot escape. They then suffocate and dehydrate Protect your investment by looking after your livestock

features: – The HURRICANE has been proven to catch an incredible

16kg of flying insects per week– The HURRICANE is equipped with two 80W UV-A Lamps:

its huge light emission has an excellent attraction power– The speed of the HURRICANE’S suction is 3 m/s, which

means that no insects can escape as they cannot fly faster!– The HURRICANE is IPX4 rated, which makes it fully

compliant with the regulations for outdoor use

– The collection system is simple and hygienic to empty making the machine easy to run and keep clean. The net collection bag has a volume of 25kg

– The Hurricane is a very safe appliance. It does not emit chemical insecticides or emit gases that could possibly harm animals or workers health

– The external structure and fan are made from aluminium for strength and durability

– Very low operating costs – approx running costs from June to October is only £50.00!

– Effective range: 15 – 18m radius

simple, safe, hygenic, and very effective

The Ultimate Fly Catching Machine

FLYBON

ES® Fly Catchers

FLYBON

ES® Fly Catchers


FLYBONES® HURRICANEThe Ultimate Fly Catching Machine

Flybones® MegaLarge, powerful fly catcher unit – Glue-board system

features: – The Flybones® Mega uses high-power, shatterproof UV-A

lamps to provide a strong attraction power to flying insects When captured on the adhesive board the insect is unable to escape and dies of dehydration

– Stylish design makes it a decorative and discreet machine that hides the captured insects from view

– Ideal for large food production factories and distribution centres where a high level of hygiene is required

– Extremely easy to clean and maintain. Simple to reloadthe adhesive paper refill

– The product is made entirely from stainless steel, welded and treated for use in food preparation areas

– Can either be wall-mounted or suspended by chains– Effective range: 15 – 18m radius

Flybones® ZapElectric shock grid fly catcher unit

features: – Very sturdy construction and durable design, helps to ensure

long life in even the worst working conditions– Very easy to keep clean. Collection tray is easy to remove and clean– As flying insects are drawn near to the unit by the powerful

UV-A light, they are electrocuted by powerful 5000V electric grids (insects die before touching the grids)

– Ideal for waste recycling centres and agricultural applications, where livestock are present

– Can either be wall-mounted or suspended by chains– IPX 4 rated for outdoor use– Effective range: 15 – 18m radius


PC7500 310 x 350 x 973

Flybones® ProDecorative fly catcher unit – Glue-board system

features: – An effective fly catcher which offers optimum hygiene

with an aesthetically pleasing design– Suitable for use in food production environments, retail shops,

supermarkets, restaurants and hospitality suites– Uses new technology UV-A lamps in a screw-in housing.

Provides large attraction area and easy bulb replacement– Designed for indoor, wall-mounted applications only.– Casing surround made from stainless steel– The adhesive board refills have a large capture area and are

easy to change– Effective range: 10 – 12m radius

Flybones® CompactAir extraction fly catcher unit

features: – Flying insects are attracted to the light attraction of the UV-C

lamps. They are then drawn in by the suction of the fan and are held in the trap, where they die of dehydration because of the continual airflow

– Supplied with an internal UV-C lamp with germicidal action, which sterilizes the captured insects from microbes and bacteria

– Simple and hygienic to empty. When full the capture tray is simply removed, emptied and re-inserted into the unit

– Suitable for food preparation areas, small kitchens, dining areas, hospitals, offices, reception areas and shops

– Totally safe and very quiet, with soft plastic fan– Effective range 10 – 12m radius

Fly Catchers

No. turbine used

total mosquitoes captured

No. of collections carried out

average capture per collection

average capture per trap per collection

Farm No. 11 8 115,142,000 11 10,558,364 1,319,795

Farm No. 12 20 29,968,400 6 4,281,200 214,060

Farm No. 13 22 59,282,800 7 8,468,971 384,953

Table showing number of mosquitos caught by the hurricane at 3 different farms


PC7510 Flybones Mega 655 x 385 x 235

PC7511 Glue-board Refill Sheets Pk 10

PC7512 Flybones Mega Replacement 40w Lamp

n/a


PC7525 Flybones Zap 685 x 200 x 380

PC7526 Flybones Zap Replacement 40w Lamp

n/a


PC7520 Flybones Pro 400 x 170 x 265

PC7521 Glue-board Refill Sheets Pk 10

PC7522 Flybones Pro Replacement 20w Lamp

n/a


PC7530 Flybones Compact 245 x 220 x 340

PC7531 Flybones Compact Replacement 32w Lamp

n/a

Used AND tested by

uk goverNment

agricultural agencies

Incredible capturing capabilities, the HURRICANE can catch up to 16kg of flies per week!!!

172 173

how much inconvenience would it cause you if your network got chewed ?

RODENT REPELLER™

Controlling Rats, Mice & Grey Squirrels

Direct Signal

Cable

Reflected signal

Example of RODENT REPELLER™ installed inside electrical chambers and orientated towards the cables entrance

1. The Rodent Repeller™ generates a cone of acoustic pressure having a vertex angle of 60 degrees

2. This signal propagates in a straight line controlling rodents up to a distance of about 8 metres from the Rodent Repeller™

3. Since the walls of the electrical chambers reflect the signal a diffuser must be installed inside each chamber

4. The reflected signal completely saturates the internal area of the electrical chamber. This gives excellent protection from rodents

5. Installation tip – Ensure you plan enough direct or indirect coverage from the units you install. Often more than one unit is required to ensure 100% area protection

Ø 8m

9m

60°

code description

PC6005 RODENT REPELLER™


RODENT REPELLER™

features: – Helps protect your property and wiring– Helps reduce the risk of disease and infections– Can be used in very harsh weather conditions (IP66 rated)– Very simple to install in small confined areas– Low cost usage due to low voltage requirements– Constant efficiency – guaranteed for 3 years– Very durable brass emitter for long life service– Less expensive and more humane than a cat!– Could help save your reputation and less chance of litigation –

no manufacturer wants a dead mouse in their product!

3 YEAR

GUARANTEE!

Do bait boxes actually stoprodents entering your facility...?

An ideal entrance for a rodent!

Controlling Rats, Mice & Grey Squirrels

Help prevent an infestation...! Every year rodents cause thousands of pounds worth of damage by gnawing through cables and other sensitive electrical apparatus. This can cause dangerous and inconvenient short circuits which can kill the animal. This can cause major interruptions in power and media supplies or even cause fires

How much inconvenience would it cause if your machinery or I.T network got chewed? How would an infestation affect your company reputation as a quality supplier?

Traditional poisons can create rodent ‘cemeteries’ and health risks within roof spaces, cavities or drains by the rodent dying in areas that are not easy to access. The dead rodents then cause extremely foul odours as they take weeks or months to slowly decay! Rodents can carry and cause diseases which can be passed on to humans with possible terrible and life threatening effects!

The answer to your problems is to try to stop the rodent from entering the property or sensitive area, or if they are already in the property to make the area very undesirable for them to stay. This is where the Rodent Repeller™

comes into its’ own! It is specially designed to prevent and disperse rodent infestation in confined spaces such as suspended ceilings/attics, floating floors, cellars, ducting, electrical cupboards/panels and food areas etc

Using patented technology the transducer emits vibrations at a uniform level of acoustic pressure. These signals propagate through the air shaping an acoustic pressure cone which has a vertex angle of 60°, and are reflected by non-sound absorbing solid bodies found in their path. The signals are able to give a protection of up to 8 metres from the emission point

The acoustic pressure cone across the effective area affects the rodents by altering their sense of orientation through their hypersensitive sense of hearing. This makes the device a superb weapon against unwanted pests and is a clean and humane way of dealing with what is sometimes a huge problem, if the animals are left to multiply!

Did you know? Rodents are becoming immune to rodenticides (poisons)!

Controlling Rats, Mice & Grey Squirrels Skin Care & Industrial H

ygiene


ygiene

ROD

ENT REPELLER™

ROD

ENT REPELLER™

174 175

Product Index

Kits 165-166 Plasters 162-164Flammable Liquid Storage 48Floor Cleaning Products 170-171Floor Paint 81Floor Repair 82Floor Screed 82Floor Seal 81Floor Standing Ashtray 135Floor Standing Roll Dispenser 14Flooring, Steel Bunded 40Fluid Transfer System 60-61Fly Catchers, FlyBones® 172-173Foggers 169Folding Steps 83, 85Folding Work Platform 85Food Industry Lubricants 111FootGrip™ 78Foot Pedal Bins 122-123FootSafe™ Grating 80FootSafe™ Products 79Fork Attachments Drum Grab 101 Drum Positioner 102 Drum Rotator 101 Extension 100 Hook 99 Jib 100 Load-lifter 100 Rim Grip Handler 102 Snow Plough 102 Push Brooms 103-104Frame Mounted Seats 135Free Standing Spill Sign 27FT5000™ Skin Cleansers 142-143Fuel Storage Tanks 53-54, 57Fuel Transport Tanks 49-52Fully Welded Barrier 92Funnel, Drum 39 Funnel, IBC 43Funnel, Flexispout 64Furniture, Changing Room 131Furniture, Outdoor 136 GGas Cylinder Truck 97Good-to-Go Checklists 106-107Grab, Drum 101Graffiti Remover 110Granules, Absorbent 16Graphite Penetrating Oil 109Grating, Anti-Slip Floor 80Grease, Aerosol 109greenO clean® 170greenO clean® Plus 171greenO clean® Intensive 171GripTape™ 78Grit/Salt Bins 28Guard, Ladder 88 HHand Drum Pumps 63Hand Wipes 154-156Hand Disinfectant Wipes 156Handler, Bin 99Hanzl® Skin Care Products b4 Work Cream 149, 153 Hanocura® 150 Hanodual® 145 Hanoglove® 145 Hanoplus® 147 Hanoprotect® 145 Hano UV® 145 Stop It® 140-141Hanzl® Skin Cleansers Advanced Soy 143 Citrus 143 Hanofresh® 149, 153 Hanogel® 149, 153 Hanolac® 147 Hanolux® 146 Hanopol® 150 Hanopro® 150 Hanosan® 146

Hanosol® 150 Hanowash® 153 Hanozip® 150 Inko® 147 Kleen It® 146 Super Hanzl® 146 Top Wash 143 Zipper® 143Hanzl® Hand Cleaning Wipes 155Hanzl® Zone Wallboards 139Hardcover Drum Storage Unit 33Harness, Safety 91Hazardous Storage 47-48Hazardous Waste Bags 27Heaters, Infrared 136Heavy Duty Lockers 130Heavy Duty Pallet Truck 97Heavy Duty Standard Floor Cleaner 171Heavy Duty Truck 94Hook, Fork Mounted 99Horizontal Drum Rack 41Horizontal Drum Tongs 96 IIBC Funnel 43IBC Storage 42-44IBC Pallets, Poly 42IBC Pallets, Steel 43IBC Pump Kit 64Industrial Cleaner, Aerosol 110Industrial Extension Ladder 85Industrial Tower 88Island Bench 131iWash® Belt Bag 158 Double iWash® 160 Saline Bottles & Stations 158, 160 Wall Bracket 158 JJet Wash Machines 59Jib, Fork Mounted 100 KKits, Spill 22-26 LLabel Remover 110Laboratory Spill Tray 35Ladder Accessories 88Ladder Grip 78Ladders Accessories 88 Adjustable 83-85 Combination 84 Extend 84 Guard 88 Protector 88 Steps 86-87 Step-ladders 83, 85 Work Platform 85, 88, 89Latex Free Plasters 163Level Indicator, Drum 62Lifting Equipment 99-100Line Marking Paints 93Lining Services, Bund & Tank 46Litterbins, Indoor 115-120, 122-123Litterbins, Outdoor 121, 124Load-lifter 100Locker Room Furniture 131Lockers Express 130 Heavy Duty 130 Perforated 129 Personal Effects 131 Standard 128Longostand Bin System 120-121Loops, Bike 133Loose Granular Absorbents 16Low Level Barriers 93Lubricants, Food Industry 111Lubricants, Industrial 109-110 MMachine Steps 86

Maintenance Absorbents All-in-One Roll 7 Cushions 9 Drum Toppers 9 Pads 5 Rolls 6 Socks 8 Traffic Mat Roll 7Maintenance Trolley 94Manual Drum Tongs 96Manual Handling 94-97, 99-102Marine Booms, Oil Only 12Matting Anti-fatigue 72-77 Anti-slip 73-77 Entrance 70-71 Knee-saver 73Mechanical Overfill Device 53MegaStreet™ Recycling Units 117Mini Marine Booms 12Mobile Drum Scooter 38Mobile Drum Trolley 38Mobile Heater 136Mobile Safety Steps 87Mobile Spill Cart 15Mobile Storage Cabinets 47Mobile Waste Bins 123, 125-126Modular Flooring, Poly 31Modular Flooring, Steel 40Modulo Recycling System 118-119Multi-Purpose Truck 94MULT!L!NE® Dispensers 148 Skin Care 149, 150 Skin Cleansers 150 Starter Packs 151 NNested Lockers 128-129Non-slip Stair Treads 78-79Nozzles, Fuel Pump 55 OOdour Control Odel® 168 Odelzyme® 168Oil Saver Drum Topper 39Oil Storage Bank 53, 56Oil Only Absorbents Cushions 11 Drum Toppers 9 Marine Booms 12 Pads 10 Rolls 11 Socks 10Oil Dispensing System 60-61Oil, Graphite Penetrating 109Outdoor Bins 124Outdoor Furniture 136Overfill Device 53Overpack Drums 39 PPackaging Products 112Packaging Skip 98Packing Tapes 112Pads, Absorbent Chemical 13 Maintenance 5 Oil Only 10Paint Drain Demarcation 20 Floor 81 Line Marking 93 Slip Resistant 81Pallet Box 67 Pallet Convertor 33Pallet Loading Drum Truck 95Pallet Racking Bund 35Pallet Trucks 97Pallet Wrap 112Pallets, Spill Containment Poly Drum Pallets 32 Poly IBC Pallets 42 Steel Drum Pallets 40

A Absorbents, Chemical Cushions 13 Pads 13 Rolls 13 Socks 13Absorbent Dispensers Floor Standing 14 Wall Mounted 14Absorbent Granules 16Absorbents, Maintenance All-in-One Roll 7 Cushions 9 Drum Toppers 9 Pads 5 Rolls 6 Socks 8 Traffic Mat Roll 7Absorbents, Oil Only Cushions 11 Drum Toppers 9 Marine Booms 12 Mini Marine Booms 12 Pads 10 Rolls 11 Socks 10Absorbent Spill Kits 22-26Absorbent Stations All-in-One Station 14 Twin Station 14Access Ladders 83-85 Platforms 90-91 Podium 86 Steps 86-87 Towers 88Acid & Alkali Cabinets 48AdBlue IBC Pump Kit 64Adjustable Maxi Work Platform 85ADR Vehicle Spill Kit 24Advanced Soy Hand Cleaner 143Aerosol Industrial Cleaner 110 Line Marking Paint 93 Lubricants 109-111Air Fresheners 168All-in-One Absorbent Roll 7All-in-One Absorbent Station 14Anti-Fatigue Matting 72-77Anti-Rust Agent 109Anti-Septic Cream, Savlon 164Anti-Slip Floor Grating 80Anti-Slip Matting 73-77Anti-Slip Paint 81Anti-Slip Stair Nosings 78Anti-Slip Stair Treads 79Anti-Slip Tape, SafeGrip™ 78Ashtrays Floor Standing 135 Wall Mounted 135Asphalt Repair 82Automatic Soap Dispensers 153 BBags, Hazardous Waste 27Barrel Patch 19Barrier Creams 140, 145, 149,153Barriers, Safety Fully Welded 92 Lift Out 92 Low Level Barrier 93 Protective Posts 93Barrier, Spill 20Basic Floor Cleaner 171Battery Collection Tubes 117Bench Island 131 Outdoor Seating 136 Wall Mounted 131Benchtop Container Sump 40Big Sweep Push Broom 104Big Wash® Products 156Bike Compounds 132Bike Loops 133

Bike Racks 133Bike Shelters 133Bin Handler 99Bins Cupboard 123 Cup Collector 122 Elegance 124 Fireproof 122 Foot Pedal 122-123 Outdoor 124 Recycling 114-119 Salt/Grit Bins 28 Stainless Steel 122-123 Swing Lid 122-123 Wheeled 123, 125-126Blocks, Urinal 168Bollards, Sentinel 134Booms, Oil Only Absorbent 12Boot and Shoe Cleaner 169Bottom Emptying Skip 99Brooms, UniSweep™ 103-104Bund Lining Services 46Bunded Spill Pallets 32-36, 40-43Bunded Work Floor, Poly 31Burns First Aid Kit 166Burns Dressings 166 CCabinets & Cupboards Acid & Alkali 48 Drum Storage 41, 45 First Aid 167 Flammables 48 Hazardous 47 IBC Storage 44 Mobile 47Canister Dispensing Stand 35Canister Rack System 35Cargo Steps 86Catering First Aid Kit 165-166Cement Cleaner 82Chain & Wire Lubricant 109Changing Room Furniture 131Chemical Absorbents 13Chemical Storage 44-45, 47-48Chocks 108 Clay Drain Covers 18Clay Granules 16Cleaner, Boot and Shoe 169Cleaner, Cement 82Cleaner, Industrial 110Cleaning Wipes 154-156Clear Grease Lubricant 110Combination Ladder 84Compounds, Bike 132Confidential Waste Bins 115-116Conical Drain Plugs 19Container, Steel Storage 41, 44-45Container Sumps 40Containers, Waste Large Round 125 Large Square 125 Metal 126Containment, IBC 42-44Containment Pallets, Poly 32, 42Containment Pallets, Steel 40-41Convertor, Pallet 33Cotton Wipes 27Cream, Anti-Septic 164Cream, Skin Protection 140, 145, 149, 153Cupboard Bin 123 Cup Collector Bin 122Cushions, Absorbent Chemical 13 Maintenance 9 Oil Only 11Cylinder Support Truck 96 DDegreaser, All Purpose 170Demountable Container 45Detectable Plasters 162, 164Deterrent Device, Rodent 174-175Diesel Fuel Storage 53-54, 57Diesel Fuel Transport 49-52

Disinfectant Hand Gel 149, 153 Wipes 156Dispenser Absorbent 14 Automatic, Electric 153 Duroline® 144 FT5000® 142 MULT!L!NE® 148 Skin Care 141-142, 144, 148, 152-153 SL!ML!NE® 152-153 Stop It® 141 Tape 112 Wall Mounted 14Dispensing Bund 33Dispensing Stand, Canister 35Dock, Truck 87Document Envelopes 112Drain Bowl, Poly 37Drain Covers Clay 18 Mechanical 19 Polyurethane 18Drain Demarcation Paint 20Drain Plugs, Conical 19Drip Trays 37Drive & Bearing Lubricant 109Drum Accessories 62-64Drum Bunding, Poly 32-33Drum Bunding, Steel 40-41Drum Dispensing Bund 33Drum Dolly 96Drum Funnel 39Drum Grab 101Drum Level Indicator 62Drum Handler, Rim Grip 102Drum Level Indicator 62Drum Opening Wrench 62Drum Spill Pallets 32Drum Positioner 102Drum Pumps 63Drum Rack System 41Drum Rotator 101Drum Scooter 38Drum Rack System 41Drum Storage 41, 45Drum Taps 62Drum Tines 101Drum Topper, Absorbent 9Drum Topper, Oil Saver 39Drum Transporter 95Drum Trolleys 38Drum Trucks 95Drum Up-down Ender 96Drum Vacuum Pump 63Drum Vents 62Drums, Poly 64Drums, Steel 64Duroline® Dispenser 144 Skin Care 147 Skin Cleansers 146-147 Skin Protection 145 EEasi-Fuel Tanks 50Electric Infrared Heaters 136Electric Utility Pumps 64Emergency Spill Sign 26Entrance Matting 70Envelopes, Document 112Epoxy Floor Paint 81Epoxy Repair Mortar 82Extend Pro Ladder 84Extensions, Fork 100eyeVolution® 159Eyewash Products 157-160 FFilter Funnel 64Filter, Water & Particulate 55Fireproof Bins 122First Aid Burns Kit 166 Cabinets 167

Product Index Product Index


Product Index

177176


In the unlikely event that goods are delivered wrong or damaged, it is the responsibility of the customer to ensure sufficient time is allowed for a replacement to be sent.

1. DEFINITIONS In these terms and conditions, the following words shall have the

following meanings: “Buyer” shall mean any person, firm or company, to whom the

Firm supplies Goods or Services or with whom the Firm enters into negotiations for the supply of Goods or Services.

“Firm” shall mean Jonathan Dormer and Mandy Jane Dormer trading as Unisan Products.

“Goods” shall mean products, articles or things which are supplied by or which are the subject of negotiations for supply by the Firm to the Buyer.

“Services” shall mean services are supplied by or which are the subject of negotiations/or supply by the Firm to the Buyer.

2. MAKING THE CONTRACT2.1 The Firm’s salesmen or agents are not authorised representatives

and are not authorised to accept confirm or vary any order nor to make any representation or promise on the Firm’s behalf.

2.2 Any estimate/quotation which comprises an invitation to treat is open for a period of 30 days only from the date thereof, provided that the Firm has not previously withdrawn it. Any order issued by the Buyer is subject to acceptance by the Firm and a contract will only be formed when the Firm has accepted the Buyer’s offer to buy in writing. Any offer made by the Buyer must be confirmed in writing by the Buyer.

2.3 All orders are placed under these terms and conditions alone.2.4 These terms and conditions exclude any other terms and

conditions inconsistent therewith which a Buyer might seek to impose even though such other terms and conditions may be submitted in a later document and/or purport to exclude or supersede any terms or conditions with them or may be contained in any offer acceptance or counter-offer made by the Buyer.

2.5 All dispensers supplied by the Firm must be fitted by a competent person and must be fitted according to the instructions provided.

2.6 No variation of these terms and conditions is permitted unless expressly accepted by a Partner of the Firm in writing.

3. CANCELLATION3.1 No cancellation by the Buyer is permitted except where expressly

agreed by a Partner of the Firm in writing.3.2 The Buyer will in the event of agreed cancellation by the Buyer

indemnify the Firm fully against all expenses incurred up to the time of such cancellation together with by way of liquidated damages a sum of 33 1/3% of the contract price which shall be paid by the Buyer to the Firm Forthwith,

4. PRICE4.1 All prices quoted are those ruling at the date of dispatch or supply.4.2 Unless otherwise stated all prices quoted are Nett, exclusive of

VAT, and in the case of Goods ex works.4.3 The Firm reserves the right at any time prior to delivery of the Goods or

supply of Services to adjust the price to take account of any increase in the cost of raw materials, labour or services or any currency fluctuations affecting the cost of imported materials or services.

5. TERMS OF PAYMENT5.1 All sums become due and payable under these terms and

conditions not later than 30 days from date of invoice.5.2 Time for payment shall be of the essence.5.3 The Firm reserves the right to charge interest at 2.5 per centum

per month on all overdue accounts, such interest being deemed to accrue on a day to day basis from the due date for payment under clause 5.1.

5.4 The Buyer shall have no right to set off, statutory or otherwise.5.5 If the Buyer (being a Company) has a petition for its winding-up or

passes a resolution for voluntary winding-up otherwise than for the purpose of a bona fide amalgamation or reconstruction or compounds with its creditors or has a receiver appointed or all or any part of its assets or (being an individual) becomes bankrupt or insolvent or enters into any arrangement with its creditors or commits a material or serious breach of this Agreement (and in the case of such a breach being remediable fails to remedy it within 7 days of receiving notice to do so)’ he will be deemed to have repudiated the Contract.

5.6 The Firm reserves the right at any time at its discretion to demand security for payment before continuing with or delivering any Order, supplying any Goods or Services.

6. DELIVERY6.1 Delivery will be deemed to have been effected when the Goods

are ready for collection at the premises of the Firm or as the case may be the premises of the suppliers to the Firm in circumstances where the Goods are delivered direct from such suppliers.

6.2 Time of delivery is not of the essence.6.3 The Firm shall not be liable for any loss whatsoever or howsoever

arising caused by its non-delivery or by the failure to make Goods ready for collection on the due date.

6.4 The Firm reserves the right to make delivery by instalments and to tender a separate invoice in respect of each instalment.

6.5 When delivery is to be by instalments or the Firm exercises its right to deliver by instalments under clause 6.4 hereof or if there be delay in the delivery of any one or more instalments for whatever reason this will not entitle the Buyer to treat the contract as repudiated and/or to damages.

6.6 Deviations in quantity between the Goods delivered and Goods ordered representing not more than 10 per cent by value shall not give the Buyer any right to reject the Goods or to claim damages and the Buyer shall be obliged to accept and pay at the contract rate for the quantity of the Goods delivered.

7. SUPPLY OF SERVICES7.1 Time for the supply of Services is not of the essence.7.2 The Firm shall not be liable for any loss whatsoever or howsoever

arising caused by its failure to supply Services or any part thereof on the due date.

7.3 The Firm reserves the right to supply Services by instalments and to tender a separate invoice in respect of each instalment.

7.4 When the supply of Services is to be by instalments or the Firm exercises its right to supply Services by instalments under clause 7.3 hereof or if there be a delay in the supply of any one or more instalments of Services for whatever reason this will not entitle the Buyer to treat the contract as repudiated or to damages.

7.5 Deviation in the quantity between Services supplied and the Services ordered representing not more than 10 per cent by value shall not give the Buyer any right to reject the Services or to claim damages and the Buyer shall be obliged to accept and pay at the contract rate for the quantity of the Services supplied.

8. RISK AND THE PASSING OF PROPERTY IN GOODS8.1 Risk in the Goods shall pass to the Buyer when the Goods are delivered.

8.2 Notwithstanding risk in the Goods passing in accordance with clause 8.1 hereof title in the Goods shall not pass to the Buyer until whichever shall be the first to occur of the following:-

8.2.1 payment being received by the Firm for the Goods and Services and no other amounts then being outstanding from the Buyer to the Firm in respect of other Goods or Services supplied by the Firm

8.2.2 the Buyer selling the Goods in accordance with the provisions of these terms and conditions in which case title to the Goods shall be deemed to have passed to the Buyer immediately prior to delivery of the Goods to the Buyer’s customers; and

8.2.3 the Firm waiving its rights under this clause 8.2 in respect of specified Goods or Services whereupon title to the said Goods shall forthwith vest in the Buyer.

8.3 The Buyer is licensed by the Firm to use or to agree to sell the Goods delivered to the Buyer subject to the express condition that the entire proceeds of any sale are held in trust for the Firm and are not mixed with other moneys or paid into an overdrawn bank account and shall at all times be identifiable as the Firm’s moneys.

8.4 Until title to the Goods passes:8.4.1 The Buyer will hold the Goods as fiduciary agent and bailee for the Firm;8.4.2 the Goods shall, subject to clause 8.3, be kept separate and

distinct from all other property of the Buyer and of third parties and in good and substantial repair and condition and be stored in such a way as to be clearly identifiable as belonging to the Firm;

8.4.3 the Firm may at any time revoke the power of sale and use contained in clause 8.3 by notice to the Buyer if the Buyer is in default for longer than 14 days in the payment of any sum whatsoever due to the Firm (whether in respect of the Goods or any other Goods or Services supplied at any time by it to the Buyer) or if the Firm has bona fide doubts as to the solvency of the Buyer;

8.4.4 The Buyer’s power of sale and use contained in clause 8.3 shall automatically cease if the Buyer has a petition presented for its winding-up or passes a resolution for voluntary winding-up otherwise than for the purpose of a bona fide amalgamation or reconstruction or compounds with its creditors or has a receiver appointed of all or any part of its assets or becomes bankrupts or insolvent or enters into any arrangements with creditors or takes or suffers any similar action in consequence of debts or carries out or undergoes any analogues act or proceeding under foreign law;

8.4.5 upon determination of the Buyer’s power of sale and use pursuant to clause 8.4.3 or clause 8.4.4. the Buyer shall place any of the Goods in its possession or under its control and unsold at the disposal of the Firm and the Firm shall be entitled to enter upon any premises of the Buyer for the purpose of removing such Goods.

8.5 The Firm shall at any time be entitled to appropriate any payments made by the Buyer in respect of any Goods or Services in settlement of such invoices or accounts in respect of such Goods or Services as the Firm may in its absolute discretion think fit notwithstanding any purported appropriation to the contrary by the Buyer.

9. LIEN AND STOPPAGE9.1 Until such time as the title in the Goods has passed to the Buyer

the Firm has the right to withhold delivery if the Buyer (being a Company) has a petition presented for its winding-up or passes a resolution for voluntary winding-up otherwise than for the purpose of a bona fide amalgamation or reconstruction or compounds with its creditors or has a receiver appointed of all or any part of its assets or (being an individual) becomes bankrupt or insolvent or enters into any arrangements with creditors or takes or suffers any similar action in consequence of debts or carries out or undergoes any analogous act or proceedings under foreign law.

9.2 When the title in the Goods has passed to the Buyer and the time for payment has fallen due but payment has not been made or if the Buyer (being a Company) has a petition presented for its winding-up or passes a resolution for voluntary winding-up otherwise than for the purposes of a bona fide amalgamation or reconstruction or compounds with its creditors or has a receiver appointed of all or any part of its assets or (being an individual) becomes bankrupt or insolvent or enters into any arrangements with creditors or takes or suffers any similar action in consequence of debts or carries out or undergoes any analogous act or proceedings under foreign law the Firm has

9.2.1 a lien on the Goods so long as the Firm is in possession of them9.2.2 a right of stoppage in transit9.2.3 a right of resale9.3 For the avoidance of doubt it is hereby declared that nothing in

this clause shall affect the rights given to the Firm by ss.38–48 of the Sale of Goods Act 1979.

10. INSPECTION/SHORTAGES10.1 The Buyer is under a duty to inspect the Goods forthwith on

delivery and satisfy himself as to the due performance of Services forthwith after supply.

10.2 The Firm shall be under no liability for any defects or shortages that would be apparent on careful inspection if the terms of this clause are not complied with, and, in any event will be under no liability if a written complaint is not delivered to the Firm within 7 days of delivery or supply detailing the alleged defect or shortage.

10.3 In all cases where defects or shortages in respect of Goods are complained of the Firm shall be under no liability in respect thereof unless an opportunity to inspect the Goods is given to the Firm before any use is made thereof or any alteration or modification is made thereto by the Buyer.

10.4 Subject to clauses 10.2 and 10.3 the Firm shall make good any defect or shortage in the Goods and where appropriate replace any Goods damaged in transit as soon as it is reasonably able to do so, but otherwise shall be under no liability whatsoever or howsoever arising from such defect, shortage or damage.

10.5 Subject to clause 10.4 the Firm shall remedy any defect in the supply of Services as soon as it is reasonably able to do so but otherwise shall be under no liability whatsoever or howsoever arising from such defect

11. WARRANTY11.1 No representation or warranty is given as to the suitability or

fitness of the Goods or Services for any particular purpose and the Buyer shall satisfy himself in this respect and shall be totally responsible therefore

11.2 If the Goods are in such a state or the Services so defectively supplied as would but for this condition entitle the Buyer to repudiate the contract and/or claim damages from the Firm the Firm reserves the right to repair or replace the Goods or perform the Services (or the relevant part thereof) again.

12. LIABILITY12.1 Introduction12.1.1 Nothing in clause 12 shall be deemed to exclude or restrict the

Firm’s liability for death or personal injury resulting from negligence.12.1.2 Each of the sub-clauses in clause 12 is to be treated as separate

and independent12.1.3 The Firm is willing to undertake liability additional to that provided

by this clause in exchange for a higher price

12.2 Exclusion12.2.1 Clause 12.2 only covers defects caused by faulty design,

manufacture, materials or workmanship. It does not cover defects caused by abnormal use, misuse or neglect.

12.2.2 The Firm agrees that if any defect covered by clause 12.2 is discovered during the period of three months commencing with the date of delivery or supply, the Firm will remedy any defect at its own expense or, in the case of Goods if it chooses to do so, replace them.

12.2.3 The Buyer cannot claim the benefit of this clause unless – he informs the Firm of the relevant defect in writing within 7

working days of discovering it; and – in the case of Goods he returns the Goods to the Firm at his own

expense 12.2.4 The risk of accidental loss whilst the Goods are being returned will

be borne by the Buyer12.2.5 In consideration for receiving the benefit of this clause, the Buyer

agrees that, apart from those terms set out in clause 10 and 11, all other terms, whether conditions, warranties or innominate terms, express or implied, statutory or otherwise, are excluded from the contract between the Firm and the Buyer to the extent permitted by law (except where the Buyer deals as consumer within section 12 of the Unfair Contract Terms Act 1977 when the terms implied by sections 13, 14 and 15 of the Sale of Goods Act 1979 shall be implied into the contract).

12.3 Exclusion of Consequential Loss The Firm shall not be liable for any consequential or indirect loss

suffered by the Buyer whether this loss arises from breach of a duty in contract or tort or in any other way (including loss arising from the Firm’s negligence). Non-exhaustive illustrations of consequential or indirect loss would be:

– loss of profits – loss of contracts – damage to property of the Buyer or anyone else, and – personal injury to the Buyer or anyone else (except so far as

such injury is attributable to the Firm’s negligence)12.4 Limitation The Firm’s total liability for any one claim or for the total of all

claims arising from any one act or default of the Firm (whether arising from the Firm’s negligence or otherwise) shall not exceed £1000 or the contract price whichever is the greater.

13. FORCE MAJEURE13.1 The Firm shall not be liable for any failure to deliver the Goods or

perform the Services arising from circumstances outside the Firm’s control.

13.2 Non-exhaustive illustrations of such circumstances would be act of God, war, riot, explosion, abnormal weather conditions, fire, flood, strikes, lockouts, Government action or regulations (UK or otherwise), delay by suppliers, accidents and shortage of materials, labour or manufacturing facilities.

13.3 Should the Firm be prevented from delivering the Goods or performing the Services in the above circumstances, it shall give the Buyer written notice of this fact as soon as reasonably practicable after discovering it.

13.4 If the circumstances preventing delivery of the Goods or performing the Services are still continuing three months after the Buyer receives the Firm’s notice, then either party may give written notice to the other cancelling the contract.

13.5 If the contract is cancelled in this way, the Firm will refund any payment which the Buyer has already made on account of the price (subject to deduction of any amount the Firm is entitled to claim from the Buyer) but the Firm will not be liable to compensate the Buyer for any further loss or damage caused by the failure to deliver the Goods or perform the Services.

14. SALES PROMOTION DOCUMENTATION Whilst the Firm takes every precaution in the preparation of its

catalogue, technical circulars, price lists and its other literature, these documents are for the Buyer’s general guidance only and the particulars contained therein shall not constitute representations by the Firm and the Firm shall not be bound thereby.

15. NOTICES Any notice to be given hereunder shall be in writing and shall be

deemed to have been duly given if sent or delivered to the party concerned at its address specified overleaf or such other address as that party may from time to time notify in writing and shall be deemed to have been served, if sent by post, 48 hours after posting.

16. CANCELLATION The Firm is prepared to accept the cancellation of a contract

provided that it is in writing and is received by the Firm: (a) in the case of special orders before the manufacture of the goods has commenced:

(b) in the case of goods ordered from stock before the goods have been despatched.

(c) but subject to liability for any losses incurred by the Firm in disposing of the goods.

17. ADVICE AND WARNINGS (a) Without prejudice to any of the Firm’s rights under these

terms or common law or statute the Firm shall not be liable for any loss or damage suffered by the Buyer or any third party as a result of failure to follow any of the Firm’s recommendations with regard to the goods.

18. SUITABILITY OF GOODS If requested in writing to do so, we will use our utmost endeavours

to give sound and honest advice as to the suitability of goods sold by us, for a particular use or purpose, but we do not represent or warrant (and nobody has authority to represent or warrant) the fitness of any goods for any particular purpose or use, whether such use or purpose is known to us or not or any advice requested regarding installation.

19. ASSIGNMENT Neither the Firm nor the Buyer shall assign or purport to assign or

transfer the contract or the benefits thereof to any other person without prior written consent of the other.

20. PROPER LAW AND JURISDICTION The Contract shall be governed by and construed in accordance

with English law and all disputes arising in connection with the contract shall be submitted to the jurisdiction of the English Courts.

21. HEADINGS The headings of these conditions are for convenience only and

shall have no effect on the interpretation thereof.

UNISAN PRODUCTS PO Box 100, Aberdare, RCT, CF44 8YX T: 0845 0700 624 F: 0845 0700 623 E: [email protected]

Terms & Conditions

Steel IBC Pallets 43Pedal Bins 122-123Perch Seat 135Perforated Lockers 129Personal Effects Lockers 131Pest Control Fly Bones® 172-173 Rodent Repeller™ 174Picnic Table 136Piston Pump 63Plasters, First Aid 161-164Plastic Shovel 27Platforms, Access 90-91Platforms, Work 85Plough, Snow 102Plug & Seal Putty 19Plunger Cans 63Podium, Access 86Poly Drain Bowl 37Polyurethane Drain Covers 18Portable Heater 136Portable Spill Kits 23Portable Snap-up Spill Pallet 34Positioner, Drum 102Posts, Protective 93Precision Lubricants 110Premium Spill Kits 25-26Pressure Washers 59Pro Adjustable Ladder 84Prodel®, Odour Eliminator 168Pro Ladder 83ProStreet™ Recycling Units 117ProZone™ Mats 76Protection, Drain 17-20Pumps Drum 63 Electric Utility 64 Fuel 55 Hand 63 Piston 63 Rotary 63Pump Sprayers 169Putty, Plug & Seal 19 QQuickFIX Plasters 161-162Quick Wash’n’Brush Cleanser 164 RRack, Drum Dispensing 33Racking Bund, Pallet 35Rainwater Storage Tanks 58Ramp, Poly Workfloor 31Rapid Response Spill Trolley 15Ratchet Strap Applicator 108Ratchet Straps 108Recycling Bins 114-119Recycling, TidyCycler™ 114Reflex Bollards 134Remover, Graffiti 110Remover, Label 110Repair, Asphalt 82Repair Mortar 82Rim Grip Drum Handler 102Rock Salt, White 28Rodent Repeller™ 174-175Rolls, Absorbent Chemical 13 Maintenance 6 Oil Only 11Rotator, Drum 101Rotary Drum Pump 63 SSack Trucks 97Safety Barriers 92-93Safety Checks, Good-to-Go 106-107Safety Signs 105Safety Step 83Salt/Grit Bins 28Salt Spreaders 28Salt, White Rock 28Salvage Drums/Overpack 39Savlon Anti-Septic Cream 164Scooter, Drum 38

Screed, Floor 82Sealer, Floor 81Seat, Perch 135Seat, Frame Mounted 135Sentinel Bollards 134Shelters, Bike 133Shelters, Smoking 135Shovel, Plastic 27Sign, Free Standing 27Signs 105Silicone Lubricant 109, 111Skin Care Starter Packs 151Skin Cleansers 143, 146, 150, 153 Skin Cleansing Wipes 155-156Skin Disinfector Gel 149, 153Skin Protection 140, 145, 149, 153Skips, Fork Mounted Auto Roll Forward 98 Bottom-emptying 99 Packaging 98SL!ML!NE® Skin Care 152-153Smoking Shelters 135Snap-up Spill Pallet 34Snow Plough 102Socks, Absorbent Chemical 13 Maintenance 8 Oil Only 10Speed Patch 82Speed Screed 82Spill Barrier 20Spill Cart, Mobile 15Spill Caution Tape 27Spill Decking, Portable 34Spill Kit Accessories 27Spill Kit Security Tags 27Spill Kits ADR, Vehicle 24 Portable 23 Premium 23, 25-26 Shoulder Bag 22-23 Special Value 22Spill Pallets 31-34, 36, 40-43Spill Response Training 21Spill Stations 14Spill Tray, Laboratory 35Spill Tray, Wheeled 36Sprayers, Pump 169Stable Steps 86Stack and Nest Containers 68Stacking Storage Containers 68Stainless Steel Bins 122-123Stair Nosings 78Stair Treads 79Steel Bund 39Steel Bunded Flooring 40Steel Drum Bund 40-41Steel IBC Pallets 43Step and Stair Cover Treads 77-78Stepladders 83, 85Steps 83, 86Steps, Cargo 86Steps, Machine 86Steps, Mobile Safety 87Steps, Stable 86Stop It® Skin Protection 140-141Stop It® All-in-One 140-141Storage Boxes 67-68Storage Cabinets, Poly 36Storage Cabinets, Steel 41, 44-45Storage Container, Steel 45Storage Containers, Stacking 67Storage, Hazardous 47-48Storage Tanks, Fuel 49-57Storage Tanks, Rainwater 58Street Recycling Units 117Sumps, Container 40Super Brooms 103-104SuperStep™ 83Surface Disinfectant Wipes 156Swing Lid Bins 122-123 TTables, Outdoor 136Tags, Spill Kit Security 27

Tank Lining Services 46Tanks, Fuel Storage 53-54, 57Tanks, Fuel Transport 49, 52Tanks, Waste Oil 56Tape, Anti-slip 78Tape, Packing 112Tape, Spill Caution 27Taps, Drum 62TidyCycler™ 114Tool & Storage Box 66Towers, Access 88Traffic Mat Absorbent Roll 7Train & Truck Wash 171Training Ladder 89 Spill Response 21 Tower 89Transparent Dressings 163Transporter, Drum 95Treads, Stair 78-79TreadSafe 81Trolley, Maintenance 94Trolley, Rapid Response Spill 15Trolley, Single Drum 38Trolley, Workshop 94Truck Dock 87Truck, Heavy Duty 94Truck, Multi-Purpose 94Truck, Sack 97Trucks, Drum 95Trucks, Pallet 97Twin Absorbent Station 14 UUnder Glove Skin Cream 145UniMaster™ Fuel Tanks 49UniMat™ 77UniSorb™ Loose & Granular Absorbents 16UniSort™ Recycling Bins 115-117UniSweep™ Super Brooms 103-104Urinal Blocks 168Utility Pumps, Electric 64UV Skin Protection Cream 145 VVacuum Pump, Drum 63Vehicle Spill Kits 24Vehicle Storage Boxes 65Vent, Drum 62 WWallboards, Hanzl® Zone 139Wall Mounted Ashtrays 135Wall Mounted Bench 131Wall Mounted Roll Dispenser 14Warning Spill Sign 27Washproof Plasters 163Waste Bags 27Waste Bins 115-126Waste Containers 125, 126Waste Recycling Bins 115-117Waste Skips 98Water & Particulate Filter 55Water Storage Tanks 58Water Transport Tanks 59WD Anti-Rust Agent 109Wheel Chocks 108Wheeled Bins 123, 125-126Wheeled Container Dolly 68Wheeled Spill Kits 25-26Wheeled Spill Tray 36White Rock Salt 28Wingspan 88Wipes, Disinfectant 156Wipes, Hand Cleaning 155-156Wipes, Polywrapped Cotton 27Woodfibre Granules 16Work Platform 85Workfloors, Bunded 31Workshop Trolley 94Wound Cleanser 164

Product Index

Terms &

Conditions

Product Index

Issue 4 179178

PO Box 100, Aberdare, RCT, CF44 8YX T 0845 0700 624 F 0845 0700 623 E [email protected] W www.unisanuk.com

Please don't bin me – pass me on to a friend or recycle me!

Environmental Hygiene & Site Safety Solutions

2011 Catalogue Environmental Hygiene & Site Safety Solutions

Documents

Transcript of 2011 Catalogue Environmental Hygiene & Site Safety Solutions