LEMBAR

HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW

Judul Artikel llmiah Penulis Artikel llmiah ldentitas Jurnal llmiah

I.Hasil Penilaian Peer Review:

Komponen

Yang Dinilai

Kelengkapan dan Kesesuaian unsur

isi jurnal (10%)

Ruang lingkup dan kedalaman

pembahasan (30%)

Kecukupan dan kemutahiran data/

informasi dan metodologi {30%)

Kelengkapan unsur dan kualitas

penerbit {30%)

Total = (100%)

KARYA ILMIAH : JURNAL ILMIAH

A method for characterizing running-in of sliding contacts Ismail, R., Tauviqirrahman, M., Jamari, J .• Schipper, D.J. a. Nama Jurnal : Key Engineering Materials b. Nomor/Volume/Hal : -/681/228.c. Edisi (bulan/tahun) : -/2016 d. Penerbite. Jumlah halaman

: Trans Tech Publication LTD :6

f. Ala mat web jurnalhttps://www.scientific.net/KEM .681.228✓ Jurnal llmiah lnternasional Bereputasi

Jurnal llmiah lnternasionalJurnal llmiah Nasional TerakreditasiJurnal llmiah Nasional tidak TerakreditasiJurnal llmiah Nasional Terindeks DOAJ dll.

Nilai Maksimal Jurnal llmiah (isikan di kolom yang sesuai)

lnternasional

Bereputasi

4

12

12

12

40

lnternasional Nasional

Terakredltasi

Nasional

Tidak

Terakreditasi

•Kelengkapan dan Kesetpaian U�n

� ��k-1 /?vi' J

.

0 •R

._uang Lingkup dan Kedalam

�n Pembaha an

t2JD-:;:: � µ� •Kecukupan & Kemutakhiran Data & Metodologi (Turnitin similarity index= 6%)

l�__,l51

c--<1� � �- /vu- t.�•Kelengkapan Unsur & Kualitas Penerbit

J-�

Nasional

Terindeks

DOAJ dll.

Nilai

Akhir

Yang

Diperoleh

3<

r.nat. r. A.P. Bayuseno, M.ScP. 196205201989021001

U it Kerja: Universitas Diponegoro Bidang llmu: Teknik Mesin Jabatan/Pangkat: Guru Besar

Kategori Publikasi Jurnal llmiah

(beri ✓ pad a kategori yang tepat)

(40% x 38)/3 = 5.1

Judul Artikel llmiah

Penulis Artikel llmiah

ldentitas Jurnal llmiah

LEMBAR

HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW

KARYA ILMIAH : JURNAL ILMIAH

A method for characterizing running-in of sliding contacts

Ismail, R., Tauviqirrahman, M., Jamari. J., Schipper, D.J.

a. Nama Jurnal : Key Engineering Materials

b. Nomor/Volume/Hal : -/681/228-233

c. Edisi (bulan/tahun) : ........ ./2016

d. Penerbit

e. Jumlah halaman

: Taiwan Assosiation of Engineering and Technology Innovation

:5

f. Alamat web jurnal

Kategori Publikasi Jurnal llmiah

(beri ✓ pad a kategori yang tepat)

I.Hasil Penilaian Peer Review:

Komponen

Yang Dinilai

Kelengkapan dan Kesesuaian unsur isi jurnal (10%)

Ruang lingkup dan kedalaman pembahasan (30%)

Kecukupan dan kemutahiran data/ informasi dan metodologi (30%)

Kelengkapan unsur dan kualitas penerbit (30%)

Total = (100%)

https ://www.scientific.net/KE M.681.228

✓ Jurnal llmiah lnternasional Bereputasi

Jurnal llmiah lnternasional

Jurnal llmiah Nasional Terakreditasi

Jurnal llmiah Nasional tidak Terakreditasi

Jurnal llmiah Nasional Terindeks DOAJ dll.

Nilai Maksimal Jurnal llmiah (isikan di kolom yang sesuai)

lnternasional

Bereputasi

4

12

12

12

40

lntemasional Nasional

Terakreditasi

Nasional Tidak

Terakreditasi

Nilai Pengusul (kontribusi pengusul penulis ketiga) = (40% x 30)/3

•Kelengkapan dan Kesesuaian Unsur

Nasional Terindeks DOAJdll.

Nilai Akhir Yang

Diperoleh

4

8

8

10

30

4,0

Tulisan sudah lengkap sesuai template jurnal Key Engineering Materials pada saat itu yaitu terdiri dari judul, abstrak,

pendahuluan, metode, pembahasan, kesimpulan, ucapan terima kasih, dan referensi. Artikel telah sesuai bidang ilmu

pengusul/anggota penulis.

•Ruang Lingkup dan Kedalaman Pembahasan lsi artikel berkaitan dengan metode untuk mengkarakterisasi masuknya kontak geser. Artikel sangat singkat dan data-data yang ditampilkan kurang komprehensif. Model pembahasan sudah baik karena melibatkan referensi lainnya yang relevans, namun

skop pembahasan perlu diperluas dan diperdalam pada aspek lainnya, sehingga tidak terlalu parsial.

•Kecukupan & Kemutakhiran Data & Metodologi

Artikel ini memiliki nilai kebaharuan yang kurang karena hanya melibatkan 8 referensi. Oleh karena itu, nilai kemutakhiran

informasi juga menjadi kurang. Turnitin similarity index= 5%

•Kelengkapan Unsur & Kualitas Penerbit

Jurnal ini tergolong jurnal lnternasional terindeks scopus dan bereputasi dengan IF: 0.18 pad a saat penerbitan tulisan ini.Semarang, 31 Agustus 2018

Unit Kerja : Universi s Diponegoro

Bidang llmu: Tekn· Kimia

Jabatan/Pangkat : Guru Besar

Scopus

Document details

References (8)

105 of 139

A method for characterizing running-in of sliding contacts (Article)

, , ,

Laboratory for Engineering Design and Tribology, Department of Mechanical Engineering, University of Diponegoro,Jl. Prof. Soedharto, Tembalang, Semarang, 50275, IndonesiaLaboratory for Surface Technology and Tribology, Faculty of Engineering Technology, University of Twente,

Drienerloolaan 5, Postbox 217, Enschede, 7500 AE, Netherlands

AbstractAlthough in terms of conservation wear is undesirable, however, running-in wear is encouraged rather than avoided.Running-in is rather complex and most of the studies related to the change in micro-geometry have been conductedstatistically. The purpose of this study was to characterize the running-in of sliding contacts using finite elementanalysis based on measured micro-geometries. The developed model combines the finite element simulation ,Archard's wear equation and updated geometry to calculate the contact pressure distribution and wear depth. Resultsshow that the proposed model is able to predict the running-in phase of sliding contact system. © 2016 Trans TechPublications, Switzerland.

SciVal Topic Prominence

Topic:

Prominence percentile: 67.554

Author keywordsFinite element analysis Running-in Sliding contact Wear

Indexed keywords

Engineeringcontrolled terms:

Geometry Pressure distribution Wear of materials

Engineeringuncontrolled terms

Contact pressure distribution Developed model Finite element simulations Micro geometry

Running-in Sliding contacts Updated geometries Wear equations

Engineering mainheading:

Finite element method

◅ Back to results ◅ Previous ▻Next

Export Download Print E-mail Save to PDF ⋆ Add to List ▻More...

View at Publisher

Key Engineering MaterialsVolume 681, 2016, Pages 228-233

Ismail, R.a Tauviqirrahman, M.a Jamari, J.a Schipper, D.J.b

a

b

View references (8)

Wear of materials | Foundations | Contact pressure

ISSN: 10139826CODEN: KEMAESource Type: Book seriesOriginal language: English

DOI: 10.4028/www.scientific.net/KEM.681.228Document Type: ArticlePublisher: Trans Tech Publications Ltd

▻View in search results format

All Export Print E-mail Save to PDF Create bibliography

PlumX MetricsUsage, Captures, Mentions,Social Media and Citationsbeyond Scopus.

Metrics

Cited by 0 documents

Inform me when this documentis cited in Scopus:

Related documents

, (2017) Journal of Tribology

, (2012) Wear

, (2015) Applied Surface Science

Find more related documents inScopus based on:

Set citation alert ▻

▻Set citation feed

Wear Modeling Revisited UsingElectrical Analogy

Hanief, M. Wani, M.F.

Applying a population growthmodel to simulate wear of roughsurfaces during running-in

Wang, Z. Zhou, Q.

Modeling and prediction ofsurface roughness for running-inwear using Gauss-Newtonalgorithm and ANN

Hanief, M. Wani, M.F.

View all related documents basedon references

▻Authors ▻Keywords

105 of 139

Kraghelsky, V., Dobychun, M.N., Kombalov, V.S.(1982) Friction and Wear Calculation MethodsPergamon Press, Oxford

 

Archard, J.F.

(1953) Journal of Applied Physics, 24 (8), pp. 981-988.  .doi: 10.1063/1.1721448

Hu, Y.Z., Li, N., TØnder, K.

(1991) Journal of Tribology, 113 (3), pp. 499-505.  .doi: 10.1115/1.2920651

Jeng, Y.-R., Lin, Z.-W., Shyu, S.-H.

(2004) Journal of Tribology, 126 (3), pp. 620-625.  .doi: 10.1115/1.1759344

Jamari, J., Schipper, D.J.

(2008) Wear, 264 (3-4), pp. 349-358.  .doi: 10.1016/j.wear.2007.03.024

Hegadekatte, V., Huber, N., Kraft, O.

(2006) Tribology Letters, 24 (1), pp. 51-60.  .doi: 10.1007/s11249-006-9144-2

Johnson, K.L.(1985) Contact MechanicsCambridge University Press, Cambridge

 

Jamari, J., Schipper, D.J.

(2007) Tribology International, 40 (8), pp. 1311-1318.  .doi: 10.1016/j.triboint.2007.02.015

Jamari, J.; Laboratory for Engineering Design and Tribology, Department of Mechanical Engineering, University ofDiponegoro, Jl. Prof. Soedharto, Tembalang, Semarang, Indonesia; email: © Copyright 2017 Elsevier B.V., All rights reserved.

1

2

Contact and rubbing of flat surfaces

Cited 3668 times

View at Publisher

3

A dynamic system model for lubricated sliding wear and running-in

Cited 38 times

View at Publisher

4

Changes of surface topography during running-in process

Cited 49 times

View at Publisher

5

Deterministic repeated contact of rough surfaces

Cited 13 times

View at Publisher

6

Modeling and simulation of wear in a pin on disc tribometer

Cited 57 times

View at Publisher

7

8

Plastic deformation and contact area of an elastic-plastic contact of ellipsoid bodiesafter unloading

Cited 16 times

View at Publisher

j.jamari@gmail.com

◅ Back to results ◅ Previous ▻Next Top of page

About Scopus

What is Scopus

Content coverage

Scopus blog

Scopus API

Privacy matters

Language

⽇本語に切り替える切换到简体中文

切換到繁體中文

Русский язык

Customer Service

Help

Contact us

Copyright © . All rights reserved. Scopus® is a registered trademark of Elsevier B.V.

We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the.

↗Terms and conditions ↗Privacy policy

↗Elsevier B.V

use of cookies

Scopus

Source details

Key Engineering MaterialsFormerly known as:

Scopus coverage years: 1982, from 1986 to 1989, 1991, from 1994 to PresentPublisher: Trans Tech Publications LtdISSN: 1013-9826Subject area: Materials Science: General Materials Science Engineering: Mechanical Engineering

Engineering: Mechanics of Materials

Mechanical and corrosion properties. Series A, Key engineering materials

View all documents ▻ Set document alert Journal Homepage

CiteScore 2018

0.33

SJR 2018

0.180

SNIP 2018

0.290

CiteScore CiteScore rank & trend CiteScore presets Scopus content coverage

Calculated using data from 30 April, 2019CiteScore

*CiteScore includes all available document types

0.33 =

 Citation Count 2018

 Documents 2015 -2017*

=

Metrics displaying this icon are compiled according to , a collaboration betweenindustry and academia.

2018

▻2,618 Citations

▻7,893 Documents

▻View CiteScore methodology ▻CiteScore FAQ

Last updated on 08 July, 2019CiteScoreTracker 2019

0.16 =  Citation Count 2019

 Documents 2016 - 2018 =

Updated monthly

▻1,095 Citations to date

▻6,972 Documents to date

↗ Snowball Metrics

CiteScore rank

Category Rank Percentile

MaterialsScience

 #345/439 20th

 

Engineering  #462/579 20th

 

GeneralMaterialsScience

MechanicalEngineering

▻View CiteScore trends

🔗Add CiteScore to your site

About Scopus

What is Scopus

Content coverage

Scopus blog

Scopus API

Privacy matters

Language

⽇本語に切り替える切换到简体中文

切換到繁體中文

Русский язык

Customer Service

Help

Contact us

Copyright © . All rights reserved. Scopus® is a registered trademark of Elsevier B.V.

We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the.

↗Terms and conditions ↗Privacy policy

↗Elsevier B.V

use of cookies

8/5/2019 3 (200×282)

https://www.scientific.net/Image/JournalCover/3 1/1

8/5/2019 Editorial Board | Key Engineering Materials

https://www.scientific.net/KEM/Editors 1/2

ISSN: 1662-9795

Periodicals

Founding Editor

Editor(s) in Chief

Editorial Board

Search

(/KE

Key Engineering Materials

Volumes (/KEM)

My eBooks (/KEM/ebooks)

Details (/KEM/Details)

Editorial Board (/KEM/Editors)

Fred H. Wohlbier

Prof. Erian A. Armanios

University of Texas at Arlington, Mechanical and Aerospace Engineering; 500 W. First Street, Woolf Hall 211, Box 19018, Arlington,USA, 76019-0018;

Prof. Aldo Roberto Boccaccini

University of Erlangen-Nürnberg, Institute of Biomaterials, Department of Materials Science and Engineering; Cauerstrasse 6,Erlangen, 91058, Germany;

Dr. Li Chang

University of Sydney, School of Aerospace, Mechanical and Mechatronic Engineering; Sydney, Australia, 2006;

Prof. Yi Bing Cheng

Monash University, Department of Materials Science and Engineering; PO Box 197, Caul�eld East, Australia, 3145;

Prof. Robert Danzer

Montanuniversität Leoben, Institut für Struktur- und Funktionskeramik; Peter-Tunner-Strasse 5, Leoben, A-8700, Austria;

Prof. Suong Van Hoa

(/) 中文 (https://zh.scienti�c.net/KEM/Editors)

   

(/Payment/Cart) LOG IN(/ACCOUNT/LOGRETURNURL=%2F

8/5/2019 Editorial Board | Key Engineering Materials

https://www.scientific.net/KEM/Editors 2/2

Concordia University, Department of Mechanical and Industrial Engineering; 1455 Demaisonneuve West # EV 4-145, Montreal,Canada, H3G1M8;

Prof. Xiao Zhi Hu

University of Western Australia, School of Mechanical and Chemical Engineering; Perth, Australia, WA 6009;

Prof. Shankar Mall

Air Force Institute of Technology, Department of Aeronautics and Astronautics; 2950, Hobson Way, AFIT/ENY, Wright-Patterson AFB,USA, 45433-7765;

Prof. Mohamed A. Taha

Ain-Shms University, Department of Design and Production Engineering, Faculty of Engineering; Khalifa El-Maamon st, Abbasiya sq.,Cairo, Egypt, 11566;

Prof. Alejandro Ureña Fernandez

Universidad Rey Juan Carlos (URJC), Department of Materials Science and Engineering; Tulipan s/n 28933, Mostoles, Madrid, Spain;

Prof. Dragan P. Uskokovic

Institute of Technical Sciences of the Serbian Academy of Sciences and Arts; Knez Mihailova 35/IV, Belgrade, Serbia;

Prof. Zhi Rui Wang

University of Toronto, Department of Materials Science and Engineering; 184 College Street, Toronto, Canada, M5S 3E4;

Prof. Ming Xing Zhang

University of Queensland, School of Mechanical and Mining Engineering; St. Lucia, Queensland, Australia, QLD 4072;

DISTRIBUTION & ACCESS (/DISTRIBUTOR)

FOR PUBLICATION (/FORPUBLICATION/CONFERENCE)

SUPPLEMENTS (/SUPPLEMENTS)

ABOUT US (/HOME/ABOUTUS)

POLICY & ETHICS (/POLICYANDETHICS/PUBLISHINGPOLICIES)

CONTACT US (/HOME/CONTACTS)

IMPRINT & PRIVACY POLICY (/HOME/IMPRINTANDPRIVACYPOLICY)

SITEMAP (/HOME/SITEMAP)

(https://www.facebook.com/Scienti�c.Net.Ltd/) (https://twitter.com/Scienti�c_Net/)

(https://www.linkedin.com/company/scienti�cnet/)

Scienti�c.Net is a registered brand of Trans Tech Publications Ltd © 2019 by Trans Tech Publications Ltd. All Rights Reserved

8/5/2019 Wear and Contact Mechanics II | p.2

https://www.scientific.net/KEM.681/2 1/2

Page

Main Themes

Volume 681doi: https://doi.org/10.4028/www.scienti�c.net/KEM.681 (https://doi.org/10.4028/www.scienti�c.net/KEM.681)

Search

Paper Title

Search

Wear and Contact Mechanics II

Papers (/KEM.681)

Book (/KEM.681/book)

< (/KEM.681) 1 (/KEM.681)

Quasistatic Electro-Elastic Contact Modeling Using the Boundary ElementMethod (/KEM.681.185)Authors: Luis Rodríguez-Tembleque, Andrés Sáez, Federico C. Buroni, Ferri M.H.AliabadiAbstract: A three-dimensional boundary element methodology to study frictionlessindentation response of piezoelectric (PE) materials is presented. The boundary...more

185

Contact Modeling of the Duct-Concrete Interface in the Evaluation ofMultistrand E�ect in High Curvature Post-Tensioned Tanks (/KEM.681.197)Authors: Fernando Medina-Reguera, Héctor Cifuentes-Bulté, Fernando Medina-EncinaAbstract: Post-tensioned tanks for nuclear and energy storage applications are smallradius cylindrical concrete structures in most cases. A large pre-compression force...more

197

In�uence of the Main Contact Parameters in Finite Element Analysis ofElastic Bodies in Contact (/KEM.681.214)Authors: Gabriel Hattori, Alberto Luiz SerpaAbstract: One of the key issues in solving contact problems is the correct choice of thecontact parameters. The contact sti�ness, the penetration limit and the contact

214

2

(/) 中文 (https://zh.scienti�c.net/KEM.681/2)

   

(/Payment/Cart) LOG IN(/ACCOUNT/LOGRETURNURL=%2F

8/5/2019 Wear and Contact Mechanics II | p.2

https://www.scientific.net/KEM.681/2 2/2

Showing 11 to 14 of 14 Paper Titles

...more

A Method for Characterizing Running-In of Sliding Contacts (/KEM.681.228)Authors: R. Ismail, M. Tauviqirrahman, J. Jamari, D.J. SchipperAbstract: Although in terms of conservation wear is undesirable, however, running-inwear is encouraged rather than avoided. Running-in is rather complex and most of the...more

228

< (/KEM.681) 1 (/KEM.681)

DISTRIBUTION & ACCESS (/DISTRIBUTOR)

FOR PUBLICATION (/FORPUBLICATION/CONFERENCE)

SUPPLEMENTS (/SUPPLEMENTS)

ABOUT US (/HOME/ABOUTUS)

POLICY & ETHICS (/POLICYANDETHICS/PUBLISHINGPOLICIES)

CONTACT US (/HOME/CONTACTS)

IMPRINT & PRIVACY POLICY (/HOME/IMPRINTANDPRIVACYPOLICY)

SITEMAP (/HOME/SITEMAP)

(https://www.facebook.com/Scienti�c.Net.Ltd/) (https://twitter.com/Scienti�c_Net/)

(https://www.linkedin.com/company/scienti�cnet/)

Scienti�c.Net is a registered brand of Trans Tech Publications Ltd © 2019 by Trans Tech Publications Ltd. All Rights Reserved

2