Post on 30-Apr-2023
Contents
General ............................................................................................ 1
How to install plugin ...................................................................... 1
Installation ................................................................................................................... 1
Starting the program ..................................................................... 2
How to use the plugin .................................................................... 5
Insert ProUnit AHU ..................................................................................................... 5 View ProUnit AHU data ............................................................................................. 8 Insert ProSelect Waterborne Climate Systems and Air Diffusers ............................... 9 Insert CASA AHU ..................................................................................................... 12 View CASA AHU data ............................................................................................. 14
Swegon MagiCAD Plugin 1
General The purpose of Swegon MagiCAD Plugin is to use ProUnit, ProSelect or Casa
software directly from MagiCAD as a product configurator when adding Swegon
products into MagiCAD for AutoCAD project / drawing.
How to install plugin
Required third-party software
Swegon MagiCAD Plugin works with the following MagiCAD versions
MagiCAD 2012.11 and AutoCAD 2010-2013 or MagiCAD 2013.4 or newer
and AutoCAD 2010-2014
Note! Inserting unit from ProUnit doesn’t require MagiCAD.
Installation
1. Download setup file from
https://delivery.progman.fi/db_and_plugins.aspx?search=Swegon&hideDB
=1&hideMisc=1
2. Ensure that you have required MagiCAD version installed on your
computer (not needed if you only want to export ahu from ProUnit to
AutoCAD drawing)
3. If you have used old ProUnit plugin, remove it manually via Control Panel.
4. Install the plugin by running
The 32-bit version
Swegon MagiCAD Plugin 2013.11.1 32-bit.msi
or
The 64-bit version of the program
Swegon MagiCAD Plugin 2013.11.1 64-bit.msi
Administrator privileges are recommended for installation. Note if you have
several AutoCAD versions on your workstation: Before you run the installation program, start MagiCAD to make sure that
Swegon MagiCAD Plugin installs on the same AutoCAD platform as MagiCAD
Starting the program
Before you start using Swegon MagiCAD Plugin, start MagiCAD and open
MagiCAD project.
Run CUILOAD or MENULOAD in AutoCAD, and browse the customization
file from the installation directory (under Program Files folder) or from
window’s ProgramData directory:
C:\Users\All Users\ Swegon\Swegon MagiCAD plugin for windows 7,
C:\ProgramData\ Swegon\Swegon MagiCAD plugin for windows 8,
C:\Documents and Settings\All Users\Application Data\Swegon\Swegon
MagiCAD plugin for windows XP.
If you have limited user rights to write to your C:\Program Files -folder, it is
recommended to load the plugin from the programData folder as AutoCAD
needs rights to write to the cui files.
When you first time start using Swegon MagiCAD Plugin, you need to load the
customization file manually.
Swegon MagiCAD Plugin 3
When you click Load, Swegon MagiCAD Plugin toolbar appears on the
AutoCAD.
and ribbon
Swegon MagiCAD plugin 2013.11.1 version .arx-files are automatically loaded
so you can use plugin without toolbar or ribbon. Just use commands SWEGON,
SWEGON_DATA, SWPROSELECTBEAM, SWCASA or SWCASADATA to
start to use plugin.
Information for network administrators:
Plugin requires connection to Swegon web site. Internet Explorer control is used
to browse web pages from proselect.swegon.se / prounit.swegon.se
Standard HTTP GET (TCP, default port 80 should be used) method is used to
retrieve files from the server. GET response includes file (mime
application/octet-stream). Your network firewall should allow such connections.
Possible error situations:
1) Toolbar is not updated properly in AutoCAD after installation,
Solution:
Close AutoCAD and delete SwegonMagi.mnr file from C:\Program
Files\Swegon\Swegon MagiCAD plugin or where you have installed plugin.
Start AutoCAD again, now toolbar should be updated properly.
2) Running old ProUnit Plugin
If you try to use old ProUnit plugin, you will get the following message
after you have logged in.
Solution:
Click button to download new version from MagiCAD Downloads-page.
Follow instructions and download new plugin from MagiCAD Download-
page.
Swegon MagiCAD Plugin 5
How to use the plugin
Insert ProUnit AHU
1. Press the plugin icon to get air handling unit to drawing.
2. Give username and password in login dialog.
3. Design unit and calculate it before you press Export Current Unit-button in
down left corner. Unit can also include external duct compenents e.g. coils.
4. Give installation height and select system for unit and duct connections.
System for duct connection is selected automatically if only one appropriate
type of connection is available.
Swegon MagiCAD Plugin 7
5. If you have exported also duct component(s), select also installation height
and duct system for each of the components.
6. Continue working with MagiCAD by e.g. drawing ducts to
unit/components.
Swegon MagiCAD Plugin 9
Insert ProSelect Waterborne Climate Systems and Air Diffusers
Press the plugin icon to add unit from ProSelect. Create products to be
exported.
By pressing button Export in lower left corner, all products in selected room will
be exported.
If you don’t want to export all the products, click Select products to export -
button.
Uncheck products which you don’t want to export and click Export-button.
Waterborne Climate Beams will be exported to MagiCAD project as Cooling
Beams (in previous versions beams where exported as Supply and Other Pipe
Device).
Other devices like Air Diffusers and Transfer Units are exported to MagiCAD as
Air Devices.
If you have already exported same device to MagiCAD, it will be highlighted in
yellow colour. Change usercode if you don’t want to replace previous device.
Click ok.
If you have multiple devices to insert MagiCAD drawing, then press Esc-button
after one device type is inserted.
Swegon MagiCAD Plugin 11
"Cooling Beam” objects have all systems in the same product.
Note! If you need to have Waterborne Climate Systems as Supply or as Other
Pipe Device in MagiCAD, export it as .QPD-file in ProSelect program, use the
file as local database and select products into MagiCAD project.
Insert CASA AHU
1. Press the plugin icon to open air handling unit selection dialog.
2. Units are sorted in the list by the unit’s maximum airflow. Select one of the
unit. You may choose left or right-handed unit and see its image, rendered
or wireframe picture.
In rendered picture duct plugins are following:
red - supply plugin
yellow - extract plugin
blue - outdoor plugin
brown - exhaust plugin
green – circulation plugin(not shown in MagiCAD drawing)
white – kitchen hood plugin(in MagiCAD drawing same as extract
plugin)
Swegon MagiCAD Plugin 13
3. After selections, press Export Current Unit -button in down left corner in
order to export the unit into MagiCAD drawing. When unit is added to
drawing, this dialog will be opened.
4. Give installation height and select system for unit and duct connections.
System for duct connection is selected automatically if only one appropriate
type of connection is available.