Private circulation only 2015 Volume 02 Issue 02 May| | | A House Journal of Plastic Piping Division - The Supreme Industries Ltd.
Striving for matchless efforts
Company has introduced many new products in existing range
Dear friends,Greetings to all of you !
After an encouraging response to our maiden issue of pipe world, we are happy to present our second issue with lot of updates on products and various events. This new issue however promises you lots of i n f o r m a t i o n o n t h e l a t e s t developments and an array of exceptionally superb products that have been launched during this period. Also we cover the various events and happenings that has taken place during these past few months.
At Supreme we are excited and happy to share the latest updates on new products in various piping systems viz. Skyrise, Nu-drain, Silbond solvent cement, Aquakraft bath fittings, Siltank water tanks etc.. These new products have many unique features and have been well received in the market. With your constant support we will continue to add new products and achieve desired objective of better plastic piping products for better life through innovations.
Your comments and feedback is extremely valuable for us and we promise to incorporate all your suggestions so that our forthcoming i s s u e s a r e p r e s e n t e d m o r e interestingly. We are confident that we will achieve our goals through your patronage and encouragement.
With a warm regards,
Editorial New Products
Based on feedback and suggestions received from our valuable customers, Supreme continues to add new products to serve the market needs. Recently many new products have been added to the range which include extension of existing range as well as many new unique products. Some of the products will be introduced for the first time in the country. This additional range of products will make the job easier, faster and economical. Details on various upcoming and recently introduced products along with some important systems that need special attention are given here.
G. S. DikondawarGM (Innovation and Technology)[email protected]
Aquagold uPVC high pressure plumbing system is now well accepted for water distribution in buildings for uptake lines, terrace looping and down take lines. This system is also used for water mains or any pressure application for transportation of water up to 50°C. Besides cost effectiveness, it offers various benefits, as a result it has successfully replaced GI for various applications. Supreme offers complete solution as per ASTM standard from ½" to 4" and most running products up to 8". We recently introduced many new products in this category which includes SCH 40 fittings in ½"to 2", Tank Air Vents, Unions in 2½", 3" & 4", Y-strainers up to 2", flange adapters, tank connectors etc. Just for quick update the new products introduced recently are given below for ready reference. These products are very useful and will help to augment the system.
uPVC High Pressure Plumbing System
Item Pressure Class
Size Application
½", ¾", 1", 1¼", 1½", 2"
SCH 40
½", ¾", 1", 1¼", 1½", 2"
SCH 40
½", ¾", 1", 1¼", 1½", 2"
SCH 40
½", ¾", 1", 1¼", 1½", 2"
SCH 40
½", ¾" SCH 40
6", 8" SCH 80
Elbow 90°
Equal Tee
MTA (Plastic)
Union
Tank Air Vent
Coupler
To remove the air from uptake watersupply lines and to provide ventilationto the water tank.
Elbow, Equal tee, MTA and Unions are the commonly used fittings in any piping system. These products are available in SCH 80 pressure class but in most of the applications SCH 40 pressure class fittings suffice the application requirements. Thus availability of these SCH 40 class fittings will reduce the project cost.
Coupler in 6" and 8" were supplied in fabricated form but to provide preciseand cost effective product we recently made available this in injection moulded version.
2
C-PVC Hot and Cold Water System
C-PVC piping system is well accepted for hot and cold application. This system can be used for concealed pipework and for water distribution in a building or for water mains in a temperature range between10° - 82° C. Many new products have been recently introduced in the range and some important products include-Hole repairing coupler, Concealed valve, Tank connectors etc. Just for quick update the new products introduced recently are given below for ready reference. These products are very useful and will help to complete the system.
Y-Strainer : Y-Strainers take their name from their configuration. Y-Strainers are typically used in applications where the amount of solids to be
removed is small, and where frequent clean-out is not required. Y- strainers are required to protect pumps, water meters, various fixtures in distribution network and for tank venting sizes at valve regulators. A Y-strainer has the advantage of being able to be installed in either a horizontal or vertical position. However, in both cases, the
Union
Water Meter Y- StrainerBall valve
Y- Strainer
Flush valve
Item Pressure Class
Size Application
1¼" SCH 80
2½ x ¾", 2½ x 1", 3 x ¾",3 x 1", 3 x 1½", 3 x 2½",4 x ¾", 4 x 1¼", 4 x 1½", 4 x 3"
SCH 80
SCH 80
SCH 80
SCH 801", 1½", 6"
Union
2 ½", 3", 4"
Y-Strainer
1", 1¼", 1½", 2"
Flange Adapter
Reducing Tee
Cross Tee
Tank Air Vent
Tank Air Vent : Normally tank vents are required for tank venting and to remove the air in the uptake line. Presently there is no readymade fitting available for this use as a result people have to combine two 90° elbow with pipe. We have introduced ready to use well designed Tank Air Vent to simplify the venting arrangement. This vent is additionally featured with provision of metal mesh which is removable for cleaning.
screening element or leg must be on the downside of the strainer body so the entrapped solids can be properly collected and held for disposal. They are most commonly used in pressurized lines, ex. before water meter in house connection, in suction or delivery lines of pumping mains, outlet of overhead tanks in terrace loops or downtake lines. If solids will flush easily from the screen, and fluid can be exhausted to atmosphere, a blow-down valve on the drain port will allow clean-out without removal of the screen, and without interrupting the process flow.
To trap and remove the solid contents in the flowing liquid.
Reducing Tees in different sizes are essentially required in any water supply and distribution system. These were supplied in fabricated form but to provide precise, functionally superior and cost effective product we recently made available these fittings in injection moulded version.
Cross tee is used to distributeflow of main/downtake line in two directions. 1¼" is recently introduced to the range in addition to the available ½, ¾ & 1" sizes
Unions are normally usedto dismantle pipe work forrepair purpose. Recently2½, 3 & 4" size unions are added to extend the range.
Flange adapters are used toconnect flanged fittings andspecials l ike different valves, flow meters, pumps, metal pipes with flanged ends etc.
Item Pressure Class
Size Application
1 x ½" SDR 9
Female Threaded Elbow
(Brass)
Female Threaded Tee
(Brass)
1 x ½" SDR 9
FTA (Brass)
1 x ½" SDR 9
Female threaded elbow (brass), Female threaded tee (brass), Female threaded adapter (brass) are the commonly used fittings in any piping system. These fittings are available in SDR 11 class but where strong and sturdy fittings are required for concealed / open plumbing we have SDR 9 class heavier fittings in our range. This SDR 9 range is now further enhanced with addition of many fittings enlisted herewith.
TankAirVent
3
Hole Repairing Coupler : Small hole formed on outer surface due to nailing or drilling in concealed PP-R pipe work can be easily repaired with hole repairing plug. Unlike PP-R, in case of PVC or C-PVC it is very difficult to repair as material properties does not allow welding. Looking at this difficulties and consistent demand for some solution for such difficult task, we are very happy to offer an innovative product called Hole Repairing Coupler for C-PVC. This small but useful product can save lot of time and cost to repair the concealed pipe line. Photographs are self explanatory to understand the repair procedure.
Item Pressure Class
Size Application
1½ x ¾", 1½ x 1¼", 2 x ¾", 2 x 1½"
SDR 11
Reducing Tee
Cross Tee
1", 1¼" SDR 11
Reducing Bush (IPSxCTS)
3 x 2" SDR 11
Female Threaded Tee (Brass)
1¼", 1¼ x ½"
SDR 11
Single Y
1¼" SDR 11
Concealed Valve
¾" SDR 11
Item Pressure Class
Size Application
2 ½", 3", 4"
SCH 40
Elbow 90°
Equal Tee
2 ½", 3", 4"
SCH 40
Whenever the connection of CTS series product (up to 2" sizes)is required to connect with IPS series product (2"& above sizes) we need this IPSxCTS reducing bush for conversion.
Single Y is used for branchconnection at 45°.
In absence of these reducing tees we have to use combination of equal tee and reducing bush for reduced size branch connection. Now due to availability of the reducing tee's mentioned herewith one can save reducing bush and saves the cost.
Cross tee is used to d i s t r i b u t e f l o w o f m a i n / d o w n t a k e l i n e in two directions.1" & 1¼" is recently introduced to the range in addition to the available ½" & ¾" sizes
Female threaded tee with threaded branch connectionis used for direct branch connection in threaded form. 1¼" & 1¼ x ½" s i z e s a r e r e c e n t l y introduced in addition to the available sizes.
Concealed valve is used forregulating flow in concealedpipe work in bath room.
Coupler, Elbow 90° and Equal tee are commonlyused fittings in any piping system. These productswere available in SCH 80pressure class but in mosto f t h e a p p l i c a t i o n s ,SCH 40 pressure class f i t t i n g s s u f f i c e t h e application requirements. Thus availability of these SCH 40 class fittings will reduce the project cost.
Hole Repairing Coupler
½"x7mm,¾"x7mm
SDR 11 Thi s innova t ive ho le repairing coupler is used to repair holes formed on concealed pipe work due to nailing or drilling.
Reducer
4 x 3" SCH 80 Reducers are normally used to reduce running pipe size in any pipe work. Recently 4x3" size reducer is added to extend the range.
Coupler
2½", 3", 4"
SCH 40
Union
2 ½", 3", 4"
SCH 80 Unions are normally usedto dismantle pipe work for repair purpose. Recently 2½", 3" & 4" size unions are added to extend the range.
4
SWR drainage system remains the preferred choice of leading architects and builders. Supreme offers, widest range of products in this product category. We continue to upgrade and add new products in this product segment. Recently we added many different products like Swept tee's, Balcony drain, Nahani trap premium and Wash basin P -Trap. Following is the list of new products which are added to the range for quick ready reference.
PP-R is an ideal product for hot and cold water distribution having many good properties. It can be used for any hot and cold water application in the range of -5° to 85° C. Besides water supply, PP-R can also be used for industrial application compressed air distribution, chilled water and air conditioning. Supreme Indo green PP-R is enhanced with following different products.
PP-R Hot and Cold Water System
In the era of plastic revolution, Supreme has introduced new range of Aquakraft bath fitting series which consist of taps, faucet, showers and accessories. These products are affordable, adorable and durable. We have introduced wonder tap which can be mass product due to its pricing. These taps are corrosion free, leakage free and drip free. Along with the regular range we have already introduced a new range of quarter turn and 'O' black series.
Bath Fittings
Supreme SILTANK's made out of virgin raw material in four layers h a s m a n y u n i q u e features like thermal insulation using foam layer, Strength and sturdiness and extra net s t o r a g e c a p a c i t y. L o o k i n g a t t h e overwhelming market response we have been encouraged to add many new sizes of tanks in our SILTANK range. Recently 750, 1500, 2000, 3000 and 5000 ltr. capacity tanks have been added to the range. Tanks up to 1500 capacity are supplied in two varieties of covers i.e. locking type and threaded type where as 2000 and above sizes are offered in threaded type covers. SILTANK is much superior to any other water tanks available in the market in terms of strength and performance.
Overhead Water Tanks
S.W.R. Drainage System
Item Size(mm)
Application
75
75
110 x 75
110 x 75, 160 x 110
Swept Tee (RxRxSpg)
Swept Door Tee (RxRxSpg)
Reducing Swept Tee (RxRxSpg)
Reducing Swept Tee with Door
(RxRxSpg)
Swept tee's ensure smooth entry of branch flow in the main stack. This minimizes the turbulence and keeps the inside core of stack free for air circulation. As per UPC any tee should have swept design only. Swept tee's are functionally much superior than normal 87.5° tee's.
Item Size(mm)
Application
20, 25, 32
Union (SxS)
Union Male Threaded
(SxMT)
20 x 15, 25 x 20, 32 x 25
Union Female Threaded
(SxFT)
20 x 15, 25 x 20, 32 x 25
Bypass Bend
20, 25, 32 Bypass bends are used to crossthe pipeline, earlier we used to supply these bends in fabricated form but to provide better and functionally superior and cost effective product we recently made available these bends in injection moulding.
Unions are normally usedto dismantle pipe work for repair purpose. Recently we have made available different varieties viz. Regular design and with male and female threaded form. As these are provided with brass threaded connections they can be used for direct joining of CP fittings or metal pipes.
5
Wash Basin P-Trap: Trap is fitted to provide the water seal. In addition to water seal, assembling or installation, cleaning provision in case of blockages is equally important. We have
designed this trap considering all these aspects and is much superior to normally used bottle traps, or P-traps. Bottle traps are prohibited by UPC. In unorganized sector people do not use any trap and directly discharge it to floor trap or drain which is quite risky. Thus this economical
trap is much superior and can address most of the prevailing problems. Recently we have made long neck to match varying depths .
In addition to the above mentioned fittings, following new SWR fittings are recently introduced to the range. These new fittings can help to simplify and executive the work speedily and efficiently.
110 x 75, 160 x 110
75, 200
110 x 75, 160 x 110
50
Item Size(mm)
Item Size(mm)
Application
32
Nahani Trap Premium
Nahani Trap (One piece)
Wash Basin P Trap
Kitchen Line Trap (SxS)
63
75, 90, 110
63, 90, 110
Application
Reducing Double Y (RxRxRxSpg)
Cleanout
Floor Drain (B)
Reducing Double Y with door (RxRxRxSpg)
These fittings were supplied in fabricated form, but to improve the functionality and to reduce the cost we recently made available these wye's in injection moulding.
This is used to drain out the rain water in balcony area.
This heavier premium nahani trap is strong enough and safe against mechanical damages. Besides strength it provides increased water seal.
This single piece design is free from any joint and hence free from leakage possibility.
This is used to provide water seal to wash basin discharge.
Kitchen line trap is a trap which provides water seal and also useful for removing solid food particles in the kitchen waste discharge line. This can be used with or without sink trap and can be placed adjacent to the kitchen.
Clean outs are simply pipe fittings essentially required for rodding, these can be opened and resealed, allowing an entrance point into the drainage system for drain cleaning, clearing blockages or inspections.
Reducing Tee(RxRxSpg),
Reducing Teewith door (RxRxSpg),
Reducing Y (RxRxSpg),
Reducing Y (SxSxSpg),
Double Y (RxRxRxSpg),
Branch Saddle (S),
Bend 45° (SxSpg),
160mm 90x75mm 90x75mm 160 x 75mm 160 x110mm 90mm 110 x 63mm
6
Hi-Tech Low Noise S.W.R. Drainage System
This indigenously manufacture product with all its superiority along with noise insulation properties is gaining good acceptance. This system is available in 50 to 200 mm with complete range of products and is further enhanced with many new products including pasted type system in 75 and 110 mm sizes. Entire list of new products added in the range is given below.
Coupler (CRxCR),
75mm
Swept Tee with Door (CRxCRxSpg)
75mm
75,110mm
Coupler (SxS)
Bend 87.5° (CRxSpg),
75mm
Fraunhofer Germany for Acoustic performance
Bend 87.5° with Door (CRxSpg)
75mm
110 x 75,160 x 75,160 x 110mm
Reducing Y (CRxCRxSpg)
75,110mm
Bend 87.5° (SxSpg)
Bend 45° (CRxSpg)
75mm
75mm
Single Y (CRxCRxSpg)
75,110mm
Bend 87.5° with Door (SxSpg)
Item Size Application
Multi floor trap is a trap which facilitate collection of waste from different appliances. This trap provide minimum 50 mm water seal.
Item Size Application
U-Trap is useful to discharge soil or wastes, this design has many good features like compact design with minimum height and length. It provides maximum water seal (51mm) and wider uniform cross section.
110 x 75 x 50/40mm
110 mm
Single Y (SxSxSpg)
75,110mm 75,110mm
Swept Tee (SxSxSpg)
75,110mm
Swept Tee with Door (SxSxSpg)
110x75mm
Reducing Swept Tee (SxSxSpg)
Reducing Y (SxSxSpg)
110x75mm
Sunken Multi floor Trap (SxSpgxSpgxS)
U-Trap
50mm
Bend 45° (RxSpg)
Bend 45° (SxSpg)
75,110mm
Swept Tee (CRxCRxSpg)
75mm
“Sanitation is more important than political independence.” - Mahatma Gandhi, 1925
7
Supreme offers exhaustive range of pipes and fittings in this application segment. Many products have been recently introduced in the pressure piping system which are given below. In addition to these new injection moulded fittings following handmade fittings are also added to the range.- 63 to 160 mm Repair Coupler Short (with elastomeric rubber seal) in 4 and 6 kgf/cm².- 20 to 50 mm Bypass bends in 15 kgf/cm².- 75 and 90 mm Threaded End Cap in 10kgf/cm².
uPVC Pressure Piping System
6 kgf/cm²
40, 50, 160
10 kgf/cm²
50, 160 10 kgf/cm²
160 4 kgf/cm²
90, 160,200, 250
6 kgf/cm²
90 x 63,110 x 75,110 x 90
6 kgf/cm²
110 x 2½"110 x 3"
6 kgf/cm²
Item Pressure Class
Size (mm)
Item Pressure Class
Size (mm)
Equal Tee
40, 50 10 kgf/cm²
Reducing Tee
90 x 63,140 x 110
6 kgf/cm²
Reducer
110 x 50,180 x 110,200 x 180,250 x 200
6 kgf/cm²
Union
32, 40, 50, 63
10 kgf/cm²
Reducing Y
110 x 63,160 x 110
6 kgf/cm²
200 x 160 4 kgf/cm²
ReducingBush
Tail Piece
63, 75,90
16 kgf/cm²
180
End Cap
4 kgf/cm²
250, 315 6 kgf/cm²
Single Y
140, 160,200
6 kgf/cm²
32, 40,50
16 kgf/cm²
Item Pressure Class
Size Application
25mm(¾")
16 kgf/cm²
Ball ValveThreadedBall Valve(Union Type)
If You Win, You Can Lead! If You Loose, You Can Guide!
-Swami Vivekananda
“ Take Risks In Your Life”
Recently Introduced Injection Moulded Pressure Fittings
Ball valve with provision of union on one side is very useful for potable water and irrigation system. This can be used i n a n y p r e s s u r e application.In addition to the 63 mm valve, we recently introduced these three sizes.
Ball valve with threaded ends having provision of union on each side is one more variety recently introduced. This is very useful for potable water and irrigation system. This can be used in any pressure application.
Item Pressure Class
Size (mm)
250
Coupler
Elbow 90°
Elbow 45°
ReducingElbow
One Side Threaded Tee
Item Pressure Class
Size(mm)
Application
8
First time in India we successfully manufactured co-extruded tracer HDPE pipes for drinking water purpose. These speciality pipes are offered in 200 to 450 mm PE 100 (6kgf/cm² pressure class) for L & T. This co-extruded tracers are specifically useful in locating the pipes under buried condition.
Casing Pipes
Supreme offers varieties of casing pipes for different application requirements. Recently we introduced casing pipes as per ASTM D - 1785 specification. These heavy duty pipes are made available in 40 to 300 mm in SCH 40 and SCH 80 varieties. These pipes are strong and durable with higher stiffness as compared to IS 12818 pipes prevailing in the market.
Polyethylene Piping System
These pipes have been specially designed and manufactured under stringent quality standards. Pipes are supplied with separate couplers and are integrally locked with the pipes using cord lock provision for perfect locking. These pipes are available in light duty, medium duty, standard duty, heavy duty and premium class for varying needs based on installation depths up to 350 mtrs.
Column Pipes forSubmersible Pumps
Underground Drainage and Sewer System
After so much of hard work put in promoting this innovative products, we now foresee a good acceptance of Nu-Drian U n d e rg r o u n d D r a i n a g e System.
of this versatile product having multiple advantages. It is now f u r t h e r e n h a n c e d w i t h additional new products given in the table.
People are extremely happy with the performance
Ultra 315 multiple inlets chamberUltra 355 multiple inlets chamberUltra 355 riser Ultra 600 chamberEccentric reducer (CRxSpg)Bottle Gully trapCover LWRodding Eye (CR)Grease trap with coverYard Gully
315 x 110 x 110 x 110mm355 x 160 x 110 x 110mm
600 x 200mm200 x 160mm200 x 160mm450mm110mm50 ltr.160 / 110mm
Item Size
Ultra 315 and 355 Multiple Inlets Chambers: Our endeavor is to offer more and more new innovative cost effective products. In this endeavor we recently introduced two inspection chamber configurations to enhance the existing range. This includes Ultra 315 multiple inlet inspection chamber with two 110 mm inlets at 45° and two 110 mm inlets at 90° in addition to main inlet / outlet in 110 mm and Ultra 355 mm multiple inlet inspection chamber with two 110 mm inlets at 45° and two 160 mm inlets at 90° in addition to the main inlet / outlet in 160 mm . For Ultra 355, riser and FRP cover is also planned to complete the assembly. These two configurations are quite useful to complete the range and to save lot of time and energy to execute the installations in time.
Ultra 600 x 200 mm Inspection Chambers: In addition to the various existing configurations in 600 x 250 mm size inspection chambers we recently introduced a very unique and cost effective inspection chambers in 600 x 200 mm size. This is available in four different configurations and are offered with and without integral shaft. This avoids the use of eccentric reducers while using 200 mm size and further cost saving is possible. This strong and sturdy design product is superior and helpful in many ways.
9
Master trap with integral chamber: Master trap is installed prior to connection of building drain to public sewer. This deep seal trap provides protection and prevents the entry of foul gases in the sewer system to enter in building drainage. Master trap is normally constructed with inspection chamber for necessary inspection and cleaning. Availability of master trap with integral inspection chamber, the product becomes complete and customer need not to construct separate masonry chamber.
10D
D
Bottle GullyTrap 8x6” Bottle Gully
Trap 6x4” 10D
D
Be a part of solution...
...Be a part of clean and green India
Let's join hands with clean India movement
355 Frame and Cover: 355 mm size frame and cover will be very soon made available in composite plastic. This cover has adequate strength to withstand light to medium traffic movements. With the availability of this frame and cover, the customer need not use anyfabricated cover or any other cover.
450 mm Light Weight Cover: This light weight cover is now made available in PE material. This is suitable for pedestrian areas where traffic load is not expected. Availability of this economical cover version can save the cost of total installation.
Rodding Eye : Access for inspection, cleaning and maintenance of underground drainage system is very important and normally achieved through inspection chambers and manholes. But most of the time we come across the situation where use of inspection chamber is either difficult or impossible due to site constraints, proximity of other adjacent chambers. Under such circumstances we can eliminate the use of chamber by replacing it with rodding eye. Thus rodding eye is an access fitting which allow rodding in case of blockage. Thus rodding eye helps to eliminate some chambers to reduce the project cost of underground drainage system. Application of the product is made clear through the picture.
Bottle Gully Trap 200x160mm:Waste lines are connected to inspection chambers through bottle gully traps. We already offer 6 x 4” size gully traps which have been well accepted in the market. For multistoried/hi-rise buildings this size of trap is not adequate. In case of multistorey buildings the hydraulic jump phenomenon takes place due to transition of flow from vertical to horizontal at relatively high velocity.
200 x 160 mm trap which is more useful as this provides additional space to accommodate liquid waste momentarily and minimizes the turbulence and overflow. We introduced this gully trap in two variants i.e. 200 x 160 and 200 x 160 x 160. These traps can also be used as collection pit for surface water collection.
The slope of the building drain is not adequate to maintain the velocity. The critical distance at which the hydraulic jump may occur varies from immediately at the stack fitting to 10 times the diameter of the stack downstream. Intensity of this hydraulic jump and effect can be minimized by using higher size of drain and the gully trap. Looking at this requirement we recently introduced
10
Grease trap: A grease trap is a device designed and installed to separate, retain and treat deleterious, hazardous and undesirable matter before they enter the sewer system. If large amounts of grease, soaps and oils enter a sewer system, the materials will coagulate, solidify and adhere to the inside wall of the pipe, eventually blocking or partially blocking the pipe. We recently introduced 50 ltrs grease trap in moulded form in addition to fabricated trap in 450 ltrs size .This new product is gaining good acceptance in the market.
Application - Restaurants, hotels, cafeterias, schools, hospitals and institutional or commercial buildings where food is served in great quantity may produce grease in sufficient amounts to warrant the installation of grease traps.
Dairies, slaughterhouses and commercial food-processing plants have grease and fats as byproducts and require grease trap.
Gasoline service stations, automobile repair shops, laundries, dry-cleaning plants, machine shops and industries using chemical processing are sources of flammable and volatile wastes that must be removed and treated; machine shops, garages, service stations, hospitals, medical clinics, dental laboratories and fish preparation areas also need grease traps.
Basket for separationof food/heavy particles
Recently we introduced solvent cement in different varieties both for uPVC and C-PVC piping system. It is gaining good market acceptance. This best quality product manufactured in ultra modern plant offers multiple advantages. With the recently added different varieties and packings complete range is now available. Features and benefits along with available range is given herewith for ready reference.
Salient Features : 1) High Quality performance : Excellent installation properties2) Meets and exceeds ASTM / BIS standard requirements3) Available through nationwide network of customer focused
distributors and dealers4) Laboratory equipped with latest technology and a set up
having capability to perform BIS and ASTM tests for quality assurance and product development
5) A fully automated modern plant built to manufacture solvent cements, primers and lubricants.
6) The containers (Tin) have unique design with the neck and cap with integral brush in plastic material. This ensures air tight closure to eliminate any contaminations.
Solvent cements and primers
Yard gully :Yard gully is a part of storm water collection system, it is used to collect rain water / surface water from the open area and discharge it by separation of sand, silt and solid wastes in the runoff. Thus Yard gully is used to separate out solids in the surface water before discharging it to storm water main, which can then be cleaned periodically. This design has unique features like partition separating collection pit and discharge section. It is provided with 160 and 110 mm outlet which can be used as per site requirements. As this Yard gully is provided with adequate water seal it can also be used for waste water collection especially when waste water contains large quantity of solid particles.
All the varieties uPVC & C-PVC solvent cements and primers under the brand name SILBOND have been certified by NSF International, USA. NSF is most prestigious certification which endorse the quality of Silbond solvent cement and primers. These products are further certified for lead free plumbing application.
11
Product range and details of Solvent Cements, Primer, Rubber Lubricant
VIOLATION : Unvented trapsWithout proper venting, water in the trap can be siphoned out, leaving the trap dry and useless without any seal. Without a trap to seal off plumbing fixtures, nasty things such as explosive methane gas and vermin can creep into the house. Hence proper stack venting is essentially required to maintain the water seal.
COMMON PLUMBING MISTAKES
Lubricant is normally used for joining any pressure or non pressure pipes having rubber seal type joints. Recently we have made a very good quality lubricant which is offered in different packing. Unique features of this quality product are given here with.
Rubber Lubricant
Salient Features :• Nonflammable, Nontoxic, Non-corrosive• Will not harm rubber gasket or plastic pipe• Safe for drinking /potable water application• Doesn't promote bacterial growth• Non greasy hence easy clean up• No odor• Water dispersible• Easy spreading
In addition to the solvent cements, primers and lubricants we are very happy to introduce one more useful and value added product called thread sealant. Thread sealant is used on threaded joints to make it water tight. This specially designed sealant made available under the brand name 'BLUESIL' is non toxic, lead and silicon free and hence absolutely safe for potable water application. Thread sealants are much superior to Teflon tapes and holdtight normally used for threaded joints in terms of performance like sealing properties potability and even stresses that come on threaded fittings. Thread sealant has lubrication properties and hence joining and rejoining of threaded components becomes easier.
100 ml250 ml500 ml
1000 ml
uPVC Regular Duty
Meets IS - 14182 and ASTM D-2564, Suitable up to 50 mm (2") diameter for SCH 40
Item Size Remark
uPVC Medium Duty
Meets IS-14182 and ASTM D-2564, Suitable upto 150 mm (6") diameter for SCH 40 and 32 mm (1¼") diameter for SCH 80
15 ml (tube)30 ml (tube)60 ml (tube)
100 ml250 ml500 ml
1000 ml
Meets IS-14182 and ASTM D-2564, Suitable upto 300 mm (12") diameter for SCH 40 and 150mm (6") diameter for SCH 80
100 ml250 ml500 ml
1000 ml
uPVCHeavy Duty
Item Size Remark
Meets ASTM F-493 and D-2846, Suitable up to -150 mm (6") SCH 40 -32mm (1¼") SCH 80 -50mm (2") SDR 11 and SDR 13.5
15 ml (tube)30 ml (tube)60 ml (tube)
100 ml250 ml500 ml
1000 ml
C-PVCMedium Duty
100 ml250 ml500 ml
1000 ml
Primer It is manufactured as p e r c o m p a n y standard. Most useful for making rubber seal type of joints.
100 gm250 gm500 gm
Rubber Lubricant
Meets ASTM F-493 and D-2846,Suitable up to-300 mm (12") SCH 40-150mm (6") SCH 80
15 ml (tube)30 ml (tube)60 ml (tube)
100 ml250 ml500 ml
1000 ml
C-PVCHeavy Duty
Meets ASTM F- 656, Use of primer prior to solvent cement joint is essential for 65mm (2 ½") and above size pipes. Use of primer will increase the joint strength.
Fixture tailpiece
S-trapDrain
Wrong
vent
Right
Trap arm
Fixture tailpiece
P-trapDrain
Depth of water seal 2 in. min., 4 in. max.
12
- He is not dependent on us. - We are dependent on him. - He is not an interruption in our work. - He is the purpose of it. - He is not an outsider in our business. - He is part of it.
- We are not doing him a favor by serving him. - He is doing us a favor by giving us an opportunity
to do so.
A customer is the most important visitor on our premises
- Mahatma Gandhi
Supreme is pleased to tie-up with CREDAI as their preferred partner. CREDAI - Confederation of Real Estate Developers' Associations of India, is national institute and a prestigious organization in the country. Preferred partner is an initiative by CREDAI to associate with leaders of Industry and services with linkage to housing and habitat. Preferred Partner Program offers year long visibility to the associating organization among its 9000 real estate developers spread across 23 states and 153 city chapters, with all the attendant benefits for sales, marketing and brand promotion. The deliverables from CREDAI like logo presence in the home page of their website, Inclusion of content in E-mailers to CREDAI members periodically through their fortnightly e-newsletter with all its members, Advertisements in CREDAI Times a quarterly journal in B2B format with circulation of 10000 copies to Members and decision makers from allied industries across India, Branding and presentation opportunities in their different events like CREDAI National Convention and Conclave etc. will certainly give big leverage to the company. Supreme has more than 6500 pipes and fittings products for different application segment. Most of the products in this widest range are most appropriate and useful for housing or reality sector. Thus this association will help to promote these products especially recently introduced new innovative products like Skyrise silent pipe system (building drainage system) for hi-rise buildings and premium projects, Nu-drain Underground drainage and sewerage system with readymade inspection chambers and manholes, Aquakraft bath fittings etc.
Supreme becomes CREDAI preferred partner
PlastIndia, Life Time Achievement AwardTo Shri. M. P. Taparia
Our managing director Shri. M. P. Taparia was awarded the lifetime achievement award during plastIndia exhibition
th2015 held at Gandhinagar on 5 Feb. He was felicitated for his extraordinary services provided for the growth of plastic industry as a whole. He has worked on various associations connected with plastic industries. He has been always on the forefront to represent industry problems to the government from time to time. The award was conferred on him for his tireless efforts of last five decades to promote excellence and innovations in the field of plastics.
Visitors at Knowledge Centre
13
Consultants thfrom Pune (MS) on17 January, 2015 Dealer and Builders from Surat (GJ)thon 20 April, 2015
Distributor from, Coimbtore (TN)Mr. Sandeep and Mr. Pradeep Agrawal
thon16 January, 2015
Plumbers from on 3 February, 2015
Guwhati (Assam)rd
Engineers from Salem (TN)thon 27 February, 2015
Plumbers from, on 3 January, 2015
Sagamner (MS)rd
Architects and Engineers stfrom Mehsana (GJ) on 1 February , 2015
Plumbers from Ankaleshwar (GJ)on 8 January, 2015
Dealers and Builders form Hoshangabad (MP)
thon 10 March, 2015
Builders and Developers from Bangalore (KAthon 30 January, 2015
)
Dealers from on 23 February, 2015
Uttarpradesh and Uttarakhandrd
Plumbers from Davangire (KA)thon 17 March, 2015
Chattisgarh Dealers ston 1 September, 2014
Feedbacks
14
Innovative, May be first in India,
saving a lot of things by
educating plumbers, builders
and contractors. Not only
manufacturing but responsible
towards nation by doing such
activities.
A. Sreenivas Prasad,
Dealer,Vijaywada
Highly impressed technology
seen at Knowledge Centre
for Plumbing, Drainage and
Water Saving Technology. All
good wishes for multifold
progress for Supreme.
Together we grow with you.
Mr. Purushottam Rathi
M/s. Rathi Brothers,
Indore (M.P.)
I am inspecting the HDPE pipes to CPWS
scheme to Y. V. Palem of ONGLE(A.P) , for
which visited the Knowledge Centre, this
is very important to all the Plumbers, and
Civil Engineers to lay the pipes etc.
Mr. Veeraprathap
Project Manager. DPSW (APRWSSP)A.P.
The Knowledge Centre developed by The
Supreme Industries Ltd. gave me a new insight to
the modern plumbing methods adopted the world
over. Also this endeavor by The Supreme
Industries Ltd. is the need of the hour in our
country. Thanks and best wishes for continued
development and innovation in this field...
J.R. Suchdev,
Central Excise Officer, MumbaiThanks to all “Supreme Team” having lot of
co-operation regarding
demonstration/quality regarding site
design on actual basis. Lot of unknown
things we have seen.
Mr. V. S. More. Sr. Project Manager
Rudranee info Ltd, Aurangabad.
It was good to see the entire product
available with the company. Nice to
see new products which make
changes in the lifestyle.
Mr. Bhagyesh Dinesh Mutha.
Suvarna Electricals,
Shirur.
I would like to thank you all for the attention given during the
factory visit and handling our queries and clearing them,
giving us a more clearer knowledge about the product as well
as the Brand Supreme.
I will not forget to mention how clean and organized the
factory was. The fully automated factory had given my team
much higher selling confidence as now they know how
superior we as a brand are as compared to any other
manufacturer in India. The training, for sure, is going to be
very fruitful for me as well as my team as all the technical
queries as well as differentiation of the material has been
cleared perfectly.
Rohit Nangia
Head Business Co-ordination
NANGIA Group of Companies, Jaipur
Had a very nice experience, this knowledge
centre is designed such a way that even a
common man can understand the importance of
plumbing and saving water. Keep up this good
work.
M
r. Jesu Prakash.A.
UL India Pvt. Ltd., Bangalore
Excellent production units and products are
good. There is high scope of these products
in Nepal as the development is increasing.
This visit was very useful for me as it was
highly informative.Ajay Kumar KC, NepalSanitary Engineer, Civil Group of Companies
The product range available &
developed by The Supreme Industries Ltd. is of wide range, very
innovatively developed, keeping
user perspective in mind. The
Knowledge Centre created at the
factory is one of its kind in the
country.As well the entire team is
extremely Knowledgeable. The
interest areas for our project are
Skyrise pipes etc.Enjoyed the visit
and the Knowledge shared.M.P. GodboleG:Corp Developers, Pune
15
Participation of the company at various seminars and exhibitions...
Events
Acetech, Kolkatta, th16 to18 January, 2015
World Plumbing Conference, New th26 to 28 February, 2015
Delhi,
Plast India, Gandhi Nagar, th5 to 10 February, 2015
Credai, Ahmedabad, st19 to 21 December 2014
Vinyl India, Mumbai th9 to 10 April, 2015
Municipalika, Ahmedabad,
th13 to 15 November 2014
19th Indian Plumbing Conference, Hyderabadth17 to 18 April, 2015
Other Events : Industrial Engineering Expo. at Indore (MP) between 9 to 12 Jan., 2015
thSupreme Technical Meet at Indore (MP) on 8 Jan., 2015thPlumber meet at Indore (MP) on 18 Jan., 2015
thSupreme Technical Meet at Harda (MP) on 20 Jan., 2015stPlumber meet at Bilaspur (CG) on 31 Jan., 2015
ndPlumber meet at Khatu Shyamji (Rajasthan) on 22 Feb., 2015
th
Of diarrhoea casesworldwide are attributed to... - Unsafe water
- Inadequate sanitation- Insufficient hygiene
16
Corporate Office :(East) Mumbai - 400 093. India. Tel: 91-22-67710000, 40430000 Regd. Office : 612 Raheja Chambers, Nariman Point, Mumbai 400 021. India Tel.: (022 ) 22851656, 22820072 Fax : (91-22) 22851657E-mail: [email protected] Website : www.supreme.co.in Overseas Office : Sharjah, U.A.E. Tel # + 971 6 557 4484; Fax # + 971 6 557 4485
1161/1162, Solitair Corporate Park, Building No. 11,167, Guru Hargovindji Marg, Chakala, Andheri Ghatkopar Link Road, Andheri Fax: 67710099 /40430099.
The Supreme Industries Ltd. (Plastic Piping Division)
CIN: L35920MH1942PLC003554
Projects
Some of the prestigious projectsexecuted using Supreme piping products
City Palace, Jaipur
Tirumala Tirupathi Devasthanam,Tirupathi
Tirupati Balaji Hospital and College, Udaipur
Apollo DB, Indore, M.P. Sri Guru Gobind Singhji Sikh Temple Yatri Nivas, Karnataka
AIIMS, Jodhpur
Grand Ridge Hotel,Tirupathi (A.P.)
Green View - Raigarh (C.G.)
Lake Garden, Udaipur
Amaraja Plant, A.P.