reliable & caring since 1976
3 h r -Axis ighly eliable Soldering Robot Model ET9383E
Features
Scope of Supply:• 3 300x300 mm -Axis Soldering Robot
Teaching Pendant Hand-held •
Controller Soldering & Wire Feeding •
Soldering & Wire Feeding Head•
911G Soldering Tip Series •
Soldering Tip Cleaning System •
increase production with hand soldering s less s ensures quality for each joint •
Few user references (many with repeat orders) for Robotic solutions Quick in India by
• Minda Stoneridge Pune (more than 10 in repeat....repeat orders in the last 3 years), • Amphenol Chennai (repeat orders) , • Mag Power Pune , • Mindarika Gurgaon , • Interface Gurgaon, • Nidec Neemrana (Japanese MNC) more than 5 ,
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 98156007451
shown trademarks are property of their respective owners.
• The ET9383E Desktop Soldering Robot features a 300x300mm movement plateform, a robust high power soldering system with a superior closed loop temperature sensor capable of delivering and maintaining a stable and accurate tip temperature
• This Robot is complete with a 200W Power Supply, a Solder Feeder, 3-Axis movement and a auto Tip Cleaning System
• Built-in intelligent temperature compensation system with accurate and stable temperature
• Built-in alarm when solder wire is blocked or no solder wire
• Digital temperature calibration, password lock function
• Process can be controlled online by connecting to MES system due to availability of control signal O/P & I/P
• Hand-held Teaching Pendent for easy programming
• Nokia Chennai (repeat orders),Precision Electronics Hyderabad •
• Flash Pune ,• BG LI-IN Aurangabad ,• Tymtix Bangalore,
Start/Pause K ey
Soldering & FeedingController
Y-Axis Platform
Solder Feeder
LCD Screen
Emergency SwitchStopSoldering Tip
Cleaning System
Soldering Head (200W)
TeachingPendant
Specifications
Input Supply
Power Consumption
Temperature Range
Number of Axis
X & Y
100-240V AC, 50 Hz
W200
50 ~ 500°C (as per working mode)
3
00mm3
100mm
0.1 00mm/sec ~ 8
0.1 00mm/sec ~ 3
±0.0 mm1
≤999, Max 60000 points in total
≤255 Files
500 x 530 x 670mm
Movement Range
Speed Range
Repeat Accuracy
Process File Number
Z
X & Y
Z
X, Y & Z
Teaching File Numbers
Dimensions (WxDxH)
Feeding Tube
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges etc., and any sort of mechanically damaged parts./Desoldering
reliable & caring since 1976
4-Axis ighly eliableh r Soldering Robot Model ET9494F
Features
Scope of Supply:• 400x400 mm 4-Axis Soldering Robot
Teaching Pendant Hand-held •
Controller Soldering & Wire Feeding •
Soldering & Wire Feeding Head•
911G Soldering Tip Series •
Soldering Tip Cleaning System •
Specifications
increase production with hand soldering s less s ensures quality for each joint •
Few user references (many with repeat orders) for Robotic solutions Quick in India by
• Minda Stoneridge Pune (more than 10 in repeat....repeat orders in the last 3 years), • Amphenol Chennai (repeat orders) , • Mag Power Pune , • Mindarika Gurgaon , • Interface Gurgaon, • Nidec Neemrana (Japanese MNC) more than 5 ,
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 98156007452
shown trademarks are property of their respective owners.
Input Supply
Power Consumption
Temperature Range
Number of Axis
X & Y
100-240V AC, 50 Hz
W200
50 ~ 500°C (as per working mode)
4
00mm4
100mm
00°3
0.1 00mm/sec ~ 8
0.1 00mm/sec ~ 3
0.1 600°/sec ~
±0.0 mm1
±0.2°
0.01mm
0. °2
≤999, Max 60000 points in total
≤255 Files
Movement Range
Speed Range
Repeat Accuracy
Resolution
Speed Control
Process File Number
Z
R
X & Y
Z
R
X, Y & Z
R
X, Y & Z
R
• The ET9494F Desktop Soldering Robot features a 400x400mm movement plateform, a robust high power soldering system with a superior closed loop temperature sensor capable of delivering and maintaining a stable and accurate tip temperature
• This Robot is complete with a 200W Power Supply, a Solder Feeder, 4-Axis movement and a auto Tip Cleaning System
• Built-in intelligent temperature compensation system with accurate and stable temperature
• Built-in alarm when solder wire is blocked or no solder wire
• Digital temperature calibration, password lock function
• Process can be controlled online by connecting to MES system due to availability of control signal O/P & I/P
• Hand-held Teaching Pendent for easy programming
• Nokia Chennai (repeat orders),Precision Electronics Hyderabad •
• Flash Pune ,• BG LI-IN Aurangabad ,• Tymtix Bangalore,
Start/Pause K ey
Soldering & FeedingController
Y-Axis Platform
Solder Feeder
Feeding Tube
LCD Screen
Emergency SwitchStopSoldering Tip
Cleaning System
Soldering Head (200W)
ON/OFF Switch
TeachingPendant
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges etc., and any sort of mechanically damaged parts./Desoldering
reliable & caring since 1976
4-Axis ighly eliableh r Dual Plateform ET9584EYASoldering Robot Model
Features
Scope of Supply:• 500x400 mm 4-Axis Soldering Robot
Teaching Pendant Hand-held •
Controller Soldering & Wire Feeding •
Soldering & Wire Feeding Head•
911G Soldering Tip Series •
Soldering Tip Cleaning System •
Specifications
Soldering & FeedingController
Emergency SwitchStop
Start/Pause K Platform 2ey
Y-Axis Platform 1
Soldering Head (200W)
Solder Feeder
Feeding Tube
Soldering TipCleaning
System
LCD Screen
increase production with hand soldering s less s ensures quality for each joint •
Few user references (many with repeat orders) for Robotic solutions Quick in India by
• Minda Stoneridge Pune (more than 10 in repeat....repeat orders in the last 3 years), • Amphenol Chennai (repeat orders) , • Mag Power Pune , • Mindarika Gurgaon , • Interface Gurgaon, • Nidec Neemrana (Japanese MNC) more than 5 ,
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 98156007453
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as
Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges etc., and any sort of mechanically damaged parts./Desoldering
Start/Pause eyKPlatform 1
Y-Axis Platform 2
Input Supply
Power Consumption
Temperature Range
Number of Axis
Movement Range
Speed Range
Repeat Accuracy
Resolution
Speed Control
Process File Number
X
Y
Z
R
X & Y
Z
R
X, Y & Z
R
X, Y & Z
R
100-240V AC, 50 Hz
W200
50 ~ 500°C (as per working mode)
4
00mm5
400mm
100mm
00°3
0.1 00mm/sec ~ 8
0.1 00mm/sec ~ 3
0.1 600°/sec ~
±0.0 mm1
±0.2°
0.01mm
0. °2
≤999, Max 60000 points in total
≤255 Files
TeachingPendant
• The ET9584EYA Desktop Soldering Robot features a robust high power soldering system with a superior closed loop temperature sensor capable of delivering & maintaining a stable and accurate tip temperature
• This Robot is complete with a 200W Power Supply, a Solder Feeder, 4-Axis movement, Adjustable End Effector, a Tip Cleaning System, and Dual Sliding Y-Axis Plateforms
• This system is ideal for fast paced production lines due to dual plateform as one Y-Axis Plateform can be unloaded and subsequently loaded while the other Plateform is under soldering process.
• Robot has a 500mm x 400mm movement range
• Line Soldering & Point Soldering functions
• Control signal O/P & I/P available
• Auto cleaning of Soldering Tip
• Hand-held Teaching Pendent for easy programming
• Nokia Chennai (repeat orders),Precision Electronics Hyderabad •
• Flash Pune ,• BG LI-IN Aurangabad ,• Tymtix Bangalore,
incredibly highly reliable for continuous use on production line
reliable & caring since 1976
3 h r -Axis ighly eliable Soldering Robot Model ET9383E
increase production with hand soldering s less s ensures quality for each joint •
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 98156007454
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as
Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges etc., and any sort of mechanically damaged parts./Desoldering
SolderFlux
0
3
6
9
12
15
18
Flux Solder Flux Solder
Selection of Solder Wire Feeder is also critical and important to avoid Solder Balls solder and formation and splashing of flux during Soldering
Various examples of solder ball formation during soldering with normal type Feeding Unit
Latest Technology Punching/Perforated Type We recommend latest technology Punching type Soldering Wire Feeder for Robotic Soldering which punches holes in soldering wires at regular interval and allows better Flux flow and out-gassing during the soldering process which avoids SOLDER FLUX SPLASHES and avoids formation of Soldering Balls during soldering
Perforated Solder Wireafter using QUICK371HI
Cross Section Views of perforated Solder Wire
Graphical representation of micro Solder Balls and Flux Scattering
with normal Typeflux and solder
is scattering
with punching typethere is little scattering
of flux and solder
Normal Type SolderWire Feeder
Punching Type SolderWire Feeder
SolderFlux
H r & Precise older Wire Feeder with hole Punching Model 371HIighly eliable S
reliable & caring since 1976
3 h r -Axis ighly eliable Soldering Robot Model ET9383E
increase production with hand soldering s less s ensures quality for each joint •
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 98156007455
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as
Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges etc., and any sort of mechanically damaged parts./Desoldering
PC type of Soldering Tip is recommended for large pads
DV1 type of Soldering Tip is recommended for thru hole leads & connector/LCD pins
DV2 type of Soldering Tip is recommended for wire harnessing
N type of Soldering Tip is recommended for drag soldering of row of connectors
D type of Soldering Tip is recommended for line and point soldering on PCBs
Why selection of correct Soldering Tip is critical and important to ensure quality of eachSoldering Joint and also to achieve practically zero rejection for Solder Joints
Soldering Tip selection plays an important role to optimize soldering quality. That is why it is necessary to select the most suitable Soldering Tip. Below are few illustrations for selection of Soldering Tips for different applications.
We will be able to help you to select correct Soldering Tip, for that we need following from you:
a) Photo/s of your Jobs on which you want to solderb) Photo/s of your components which you want to solder
Please either email these at [email protected] or Whatsapp on Cell: 9316134502
reliable & caring since 1976
Wide range of Soldering Tips for Soldering Robots Very Long-Life
Customized Soldering Robot Tips are possible to meet specific requirements
1.0mm
1.3mm
1.6mm
2.0mm
2.4mm
3.0mm
4.0mm
*** -16D
*** -20D
*** -24D
*** -30D
*** -40D
1.6mm
2.0mm
2.4mm
3.0mm
4.0mm
*** -16DV1
*** -20DV1
*** -24DV1
*** -30DV1
*** -40DV1
1.6mm
2.0mm
2.4mm
3.0mm
4.0mm
0.5mm
0.65mm
0.8mm
1.0mm
1.2mm
1.5mm
2.0mm
0.6mm
0.8mm
0.8mm
1.0mm
1.2mm
1.0mm
1.2mm
1.4mm
1.6mm
2.0mm
1.5mm
1.5mm
1.5mm
2.0mm
2.5mm
0.6mm
0.8mm
0.8mm
1.0mm
1.2mm
1.5mm
1.5mm
1.5mm
2.0mm
2.5mm
Part Number Size (A) Size (B) Size (C) Size (D)Types
Chisel Type
Sloped Type
*** -16DV2
*** -20DV2
*** -24DV2
*** -30DV2
*** -40DV2
1.6mm
2.0mm
2.4mm
3.0mm
4.0mm
1.0mm
1.4mm
1.6mm
2.2mm
3.0mm
0.6mm
0.8mm
0.8mm
1.0mm
1.2mm
1.8mm
1.5mm
2.0mm
2.3mm
2.8mm
V-Notch Type
V-Notch Type
911B, 911G, 912 and 913-Series Soldering Tips for various Soldering Robots
*** -10PC
*** 3-1 PC
*** 6-1 PC
*** 2- 0PC
*** 24- PC
*** 3- 0PC
*** 4- 0PC
*** -22N08H18
*** -28N08H15
*** -30N10H20
*** -32N12H23
*** -32N12H28
2.2mm
2. mm8
3.0mm
3. mm2
3.2mm
0.8mm
0.8mm
1. mm0
1.2mm
1.2mm
3.2mm
3.6mm
4.0mm
4.0mm
4 0. mm
1.8mm
1.5mm
2.0mm
2.3mm
2.8mm
N Type
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 98156007456
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as
Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges etc., and any sort of mechanically damaged parts./Desoldering
to automate dispensing materials with higher productivity and consistent repeatability
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Nozzles, Barrel etc. and any physically damaged parts. shown trademarks are property of their respective owners.
reliable & caring since 1976
Demo unit available in Chandigarh Office, customers are welcome to
visit us with their samples for trial
Sealant Dispensing Conformal Coating Dispensing Glue & Adhesive Dispensing Solder Paste Dispensing
Click here to view video links for various Dispensing Applications
B ENEFITS
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 98156007457
Scope of Supply:• 3-Axis 300x300 mm Dispensing Robot
Teaching Pendant with Interface Cord• Dispensing Controller with Cord• Nozzles (12 Pcs) Adaptor Allen Key Box • • •
• PU tube (8mm dia x 2.5 meter length)
• • Dispensing Barrel & Piston Instruction Manual
• Precision Electronic Components Mfg. Co., Hyderabad• Kostal India Private Limited, Vellore (Tamil Nadu)• Mag Power, Pune • Sahyadri Udyog, Pune• Vishal Engineering, Pune (repeat order)
Few user references (many with repeat orders) for Robotic solutions Quick supply in India by
• Intelux Electronics Private LimitedReanu Micro Electronics Pvt. Ltd., Pune•
• Mindarika Private Limited, ManesarNidec India Private Limited, Neemrana• muP Electronics, Nashik •
Specifications
Input Supply 100 240V AC, 50 Hz~
3
00mm3
100mm
0.1 00mm/sec ~ 8
0.1 00mm/sec ~ 3
±0.0 mm1
≤999, Max 60000 points in total
≤255 Files
610 x 650 x 630mm
Number of Axis
X & YMovement Range
Z
Speed Range X & Y
Z
Repeat Accuracy X, Y & Z
File Capacity
Process File Number
Dimensions (WxDxH)
This desktop Robot is designed for the automation of dispensing operation to minimize working hands. Besides increasing productity, it also lowers production cost because there is no wastage of dispensing materials. It is a fully-automatic & high resolution control system with 3 axis movement. This unit also provides easier programming instructions, more parameters, a larger memory space and a higher speed. It increases production rate.
Start/Pause K ey
Dispensing Controller
Y-Axis Platform
LCD ScreenEmergency
SwitchStop
TeachingPendant
Dispensing Syringe
Highly reliable Dispensing Robot for Adhesives, Sealing & Greasing Model ET8383
High Production with minimum workforceVirtually zero wastage of dispensing materialSame consistent accurate dispensing quality&
Th esktop Screw Robot designed for automation of screw locking process to minimize ese D Fastening s are, thesework force on production line. Besides increasing productivity without adding working hands, also
same provide reliable type consistent screw fastening with torque.
Scope of Supply:
Main Unit Robotic •
Teaching Pendant•
Auto Screw Feeder•
Electric Screwdriver•
Instruction Manual•
Single ead fast working, greatly improves product/Double H for ivity•
Automatically pick and tighten screwss s•
Continuous feeding counting prevent missing screwScrew with , also s s•
Constant torque with screw slip teeth and floating lock detection•
The device has an external job status indicator prompting•
Hand-held programming endantP•
Features
Affordably Priced, & Precise Screw Fastening Robots Highly eliableR
Screws feeding with counting at high production rate & also prevents missing of screws reliable & caring since 1976
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 98156007458
Warranty is 12 months from the date of invoice. It excludes all and any physically damaged parts.wear & tear type parts
Torque Controlled Screw Driver
Auto Screw Feeder
Y-Axis Plateform
Start/Pause K ey
LCD Screen
Emergency SwitchStop
Electric Screwdriver Controller
HandheldTeaching Pendant
ET7483K ET7483KYAET7483KXZ
100 ~ 240V AC, 50 Hz
3
Model
Input Supply
Number of Axis 3 3
Specifications:
Movement Range
Movement Speed Range
Repeatability
400mm 500mm 400mm
400mm 400mm 400mm
100mm 100mm 1 0mm 5
0.1 ~ 00 mm/sec 10
0.1 ~ 00 mm/sec 10
0.1 ~ 300 mm/sec
±0.0 mm 1
X
Y
Z
X
Y
Z
X /Y/Z
Y-Axis Load 8 Kg
Screw Feeding
Screwing Range (X/Y) 170x370mm340x370mm
Air Suction
360x370mm
PassF a i l
Will show pass if screw is fastened correctly otherwise will show as fail
Model ET7483KSingle Head design
Model ET7483KXZDual Head design
Model ET7483KYASingle Head Dual Plateform
Affordably Priced, & Precise Screw Fastening Robots Highly eliableR
Screws feeding with counting at high production rate & also prevents missing of screws reliable & caring since 1976
Suitable for M1 M5 ~ Screws
Air Pressure
Demo File Number
0.4MPa ~ 0.6MPa
Max. 255 Files, Max 60000 Points
Dimensions (approx) 8 0Wx Dx8 0H mm2 690 18 Wx Dx8 H mm10 690 60750Wx Dx81 H mm690 0
Process File Number Max. 128 Files
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 98156007459
Warranty is 12 months from the date of invoice. It excludes all and any physically damaged parts.wear & tear type parts
• 5 .4 Kgf.cm0. ~2 1.0 4.8 Kgf.cm~• 2.0 9.6 Kgf.cm~• 4.0 19 Kgf.cm~•
Torque Ranges
Specifications of Screwdrivers used in Screw Fastening Robots
Affordably Priced, & Precise Screw Fastening Robots Highly eliableR
Screws feeding with counting at high production rate & also prevents missing of screws reliable & caring since 1976
Electric Screwdriver Controller
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074510
Warranty is 12 months from the date of invoice. It excludes all and any physically damaged parts.wear & tear type parts
Smart Control: 3 ways and 16 lock parameters
Process Monitoring: Real-time lock data like torque profile, real torque value, angle, time and lock result etc. displayed on screen
Smart Detection: Missing lock, Floating lock and thread loose etc. defects can be detected
Data Collection: Real-time data cab ne controlled in the controller, standard 4G memory can store 4 milliuons on screw data, torque profile can be saved in USB or PC.
History Tracing: Locking data can be viewed and exported for analysis.It is recommended to use with code scanner
Communication: RS232, RS485, USB and Ethernet available
Electric Screwdriver Nozzle Assembly
ModelRotating Speed
5(r.p.m)± % Bit Specifications
ECS80T-50A
1500ECS80T-100A
ECS80T-200A
ECS80T-400A
N.m
0.0 ~0.25 4
0. ~0.1 48
0. ~0.2 96
0. ~1.4 9
Output Torque Range
0.44~2.12
0.89~4.25
1.77~8.5
3.54~16.82
lbf.in
0. ~25 .4
1.0~4.8
2.0~9.6
4.0~19
kgf.cm
Nozzle Head
Nozzle Assembly
Nozzle
Assembly
Model
ECS21DA-Z4
ECS21DA-Z5
Bit
Diameter
(mm)
Ø4mm
Ø5mm
Note: Nozzle Assembly, Nozzle head and bit depend on application
Features:
ECS65A Screw Feeder for Screw length upto 15mm
Features:
Fixing Assembly ECS15C
Affordably Priced, & Precise Screw Fastening Robots Highly eliableR
Screws feeding with counting at high production rate & also prevents missing of screws reliable & caring since 1976
ON/OFF Switch
Menu Setting
Platen Adjustment
Empty Alarm Sensor
Rotary Feeding Table
• Lead rail and rotary feeding table can be adjusted and replacedfor screws M1.0 ~ M5.0 with length upto 15mm
• Volume 0.15L, maximum 600 pcs of M3x8 pan-head screws can be put inside
• Reliable screw feeding, feeding speed 50-80 pcs/min
• Precise feeding, repeatability ±0.02mm
• Signal output available when screws are ready for auto machines
• Record screw feeding quantity
• Feeding speed and feeding delay are adjustable
• Dimensions (WxDxH): 125 x 202 x 150mm
• Weight: 3.5 kg (approximately)
Model
EC65A
Input Voltage
AC100~240V, 50Hz
Output Voltage
DC15V/1.5A
Applicable Screws
M1.0 ~ M5.0
Applicable Length
≤15mm
Volume
0.15L
Specifications:
ECS66A Screw Feeder for Screw length upto 18mm
• Lead rail and rotary feeding table can be adjusted and replacedfor screws M2.0 ~ M6.0 with length upto 18mm
• Volume 0.45L, maximum 1800 pcs of M3x8 pan-head screws can be put inside
• Reliable screw feeding, feeding speed 50-80 pcs/min
• Precise feeding, repeatability ±0.02mm
• Signal output available when screws are ready for auto machines
• Record screw feeding quantity
• Feeding speed and feeding delay are adjustable
• Dimensions (WxDxH): 165 x 265 x 180mm
• Weight: 4.8 kg (approximately)
Fixing Assembly ECS15D
Model
EC66A
Input Voltage
AC100~240V, 50Hz
Output Voltage
DC15V/1.5A
Applicable Screws
M2.0 ~ M6.0
Applicable Length
≤18mm
Volume
0.45L
Specifications:
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Warranty is 12 months from the date of invoice. It excludes all and any physically damaged parts.wear & tear type parts shown trademarks are property of their respective owners.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074511
ON/OFF Switch
Menu Setting
Platen Adjustment
Empty Alarm Sensor
Rotary Feeding Table
reliable & caring since 1976
Dehumidifying Dry Storage Cabinet IDSC- 80 2 1050 Model 1 - D-
Powerful sDesiccator ensurefaster set humidity recovery
Rugged Handles lock by
pressing & with Key
Wrist Strap Terminal ESD Safe for ty
Digital Display with USB PC Interface & Door Alarm
in-built USB Port for DataLogging (with customer'scomputer)
Grounding Line is provided at back side
Capacity: 80 litres 1 (approx.)•
Tampered Toughened Glass Windows •
Digital Display for Temperature and Humidity•
Humidity Controller maintains stable RH Level•
Accuracy: ±3%RH (It is not ±3%)*• i* If the set hum dity is 10%RH. Then the actual value will be within 7%RH &
it is set at 13%RH. If 25%RH then actual value will be within 22%RH & 28%RH.
Features: Specifications:
Humidity Range Humidity Technique Internal Dimensions External DimensionsMaterial N of o. Doors/ShelvesInput Supply
: 0% ~ 50%RH1: Semi-permanet dry esic antd c: 398W x 370D x 225H mm approx.1: 400W x 400D x 395H mm approx.1: Cold Roll Steel with Black Paint: 2 5 Doors/ Shelves: 220V ~ 240V, 50Hz
ESD Safe Powerful • • Desiccators for recovery normally immediate deliveryfast
Moisture Sensitive IC Packages, PCBs, Silicon Wafers, Ceramic Substrates, assembled & bare Solar Cells, Surgical samples Instruments, Pharmaceuticals , Video Tapes, Micro Films, Camera Lenses and Cameras, Tea Samples,
sCoffee Samples, Night Vision Equipments, Seed amples etc.
Wide applications of Dry ESD Safe Dehumidifying Storage Cabinets for safe storage of:
Miniaturization in electronics field require use of expensive large size SMD ICs which are not only static charge sensitive but are also moisture sensitive. They need higher level of moisture control as otherwise they will have internal cracking during reflow process because of moisture expansion. Prevention lies in storing the same in ESD Safe and humidity controlled Dry Storage Cabinets.
ESD Safe Dehumidifying Storage Cabinets must areB Ato maintain high reliability of are/ ssembled PCBs,
expensive SMD ICs & other components to avoid Micro Cracks, depanelling and delamination
Reflow Heating
Internal Peeling
Internal peeling is caused by watervapour pressure during heating
Reflow Heating
Package Cracking
Package micro-cracking is caused bythe vapour pressure from delamination
Normal Storagemoisture
During normal storage, ambientmoisture is absorbed into ICs
Micro Crack
Micro-cracking of IC Packages
Normally these defects occurs during reflow process. incase of lead free soldering process, risk of defects increases almost 3 times as the soldering temperature requirement is higher. To avoid these soldering process defects, all such moisture sensitive devices needs to be stored in humidity controlled cabinets.
Heavy Duty 3’’ dia Castor WheelsFront 2 Castor wheels are lockable type
Tampered Toughened Glass windows
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
12
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes any mechanically damaged part.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Distance between 2 Shelves is adjustable as per requirement
reliable & caring since 1976
The distance between shelves of this Dehumidifying Dry Storage Cabinet is adjustable as per requirement of stored articles. The Cabinet uses track design with detachable clamps to adjust the distance in steps of 2.54 mm. To adjust the distance, just lift the shelf to detach all the clamps. Fix the clamps again at required positions and place the shelf back on the clamps.
This is a dehumidifying cabinet and not humidity generator. inside humidity %RH level can never be achieved beyondambient humidity level for this reason. incase higher humidity is to be set, customer need to buy Humidity Chamber..
This is not a temperature cycling chamber, does not have forced heating and also refrigeration type cooling. For this reason, temperature can not be set and can not be controlled; displays ambient temperature as is inside the Cabinet.
inside Humidity level can not be more than ambient humidity levelTemperature will be ambient only and can not be controlled
Dehumidifying Dry Storage Cabinet IDSC- 80 2 1050 Model 1 - D-
Toughened Glass
Control andDisplay Panel
3'' Heavy Duty Castor Wheels
Adjustable Shelf
USB Interface Port
Dimensional Drawing of Dehumidifying Dry Storage Cabinet
400mm400mm
ESD Safe Powerful • • Desiccators for recovery normally immediate deliveryfast
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
13
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes any mechanically damaged part.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
D based technology used in this is esiccant Dehumidifying Dry Storage Cabinet virtually .maintenance-free material of d virtually any Zeolite esiccators does not need replacement
CabinetHumidity
Inner Shutter
Desiccant with heater
Outer Shutter
Spring mechanismto control shutters Exhaust
Electroniccircuitary
Valveopenedinward
Super DryZeolite Material
Super DryZeolite Material
Desiccator Desiccator
ValveOpenedOutward
Absorption Stage: Valves are opened inward and closed outward in order to absorb moisture from the
articles to Cabinet and stored maintains the sethumidity with repeated process
Exhaustion Stage: Valves are closed inward andopened outward in order to exhaust moisture fromsaturated desiccators to atmosphere outside thedehumidifying dry cabinet
Desiccant technology uses highly porous crystalline material belonging toalumino silicates class, called Zeolite. Zeolite desiccant is refreshed bycontrolled heating and allows the trapped moisture in it to escape thru thevents located at the back side of the Cabinet. Once Zeolite desiccantmaterial is refreshed thru heating, it seals off the back side vents andopens to the interior side for dehumidification to set level as programmed.The dehumidification level inside is continuously compared to the presetlevel till it achieves the desired RH level. Zeolite material
Re-heating of the Zeolite desiccant material starts only when the humidity inside the cabinet exceeds the absorption capacity of Zeolite drying material. Normally the re-generation of the Zeolite desiccant material thru just 8 minutes
heating, suffices for many weeks of dehumudification process.
reliable & caring since 1976
Why user does not need any installation and operation training ?
This Dehumidifying Dry Storage Cabinet merely needs Mains AC Power Supply switching ON. User need to set%RH level as he wants from the front panel. The Cabinet will start working. Few points worth practicing are:.
1) Dehumidifying Cabinet should not kept near an air outlet such as air conditioning slot, exhaust fan slot, under the fan, near the door etc. also these should not be kept under direct sunlight in the room. These will affect the stability of Humidity Control..
2) Ensure at least 20 cm gap between Dehumidifying Cabinet and any nearby wall.
No Spare Parts and No AMC is required for this Dehumidifying Dry Storage Cabinet
As explained above, this desiccant based technology works for years together reliabily, without replacement of Zeolite material at all. For this reason, user neither needs any spare parts nor any annual maintenance contract.
For achieving higher humidity switch only one (main) desiccator. level, user should ON For achieving lower humidity level, user must ON . As an e hswitch all 4 desiccators together xample for achieving umidity range
%RH, user should ON only; h %RH, userbetween 45 ~60 switch 1 desiccator for umidity range between 30~45should ON only; %RH, user should ONswitch 2 desiccators for humidity range between 15~30 switch 3
; %RH, user should ON a .desiccators for humidity range between 1~15 switch ll 4 desiccators
How to achieve low humidity level and higher humidity level inside the Cabinet
Accuracy of humidity level is ±3%RH (and not ±3%). If set hum dity is 10%RH, then actual value will be within i7%RH and 13%RH. If 25%RH, then actual value will be within 22%RH & 28%RH. If 50%RH, it is set at it is set at then actual value will be within 47%RH & 53%RH. For this reason user never needs lower than 1%RH step settings.
User never needs lower than 1%RH step settings
Dehumidifying Dry Storage Cabinet IDSC- 80 2 1050 Model 1 - D-
ESD Safe Powerful • • Desiccators for recovery normally immediate deliveryfast
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
14
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes any mechanically damaged part.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Partial User References (not complete list) of our Dehumidifying Dry Cabinetsreliable & caring since 1976
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
15
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes any mechanically damaged part.
Customer’s Name & CitySNo. QtyCustomer’s Name & CitySNo. Qty
509 Army Base Workshop, Agra
Aamstech Solution Coimbatore,
ACD Communications Pvt.Ltd. Hyderabad
Aforeserve Comm Ltd.,Bangalore
Air Force Station, Pune
Alligator Designs Pvt. Ltd. Bangalore
Alan Electronic Systems Pvt. Ltd., Ambernath
Amar Raja Batteries Ltd., Karakambadi
Ananth Technologies Ltd., Hyderabad
Apex Electronics Secunderabad,
Applied Electro-Magnetics Pvt. Ltd., Noida
Autotech Systems Pvt. Ltd., Bangalore
Axiom Research Labs Pvt. Ltd. Bangalore
Bharat Electronics Ltd.-Jalahalli, Bangalore
Bharat Electronics Ltd., Chennai
Bharat Electronics Ltd., Ghaziabad
KotdwaraBharat Electronics Ltd.-
Bharat Electronics Ltd., Panchkula
Bharat Electronics Ltd., Machilipatnam
Bharat Dynamics Ltd., Visakhapatnam
Blue Chip Electronics, Secunderabad
Bluechip Infotech West Bengal,
BEL-Thales Systems Ltd., Bangalore
Centum Electronics Ltd. Bangalore
Computronic Sales Corporation Allahabad
Centre for Development of Telematics, New Delhi
Centre for High Energy System and Sciences (CHESS)
Cinehive Web Technologies Pvt. Ltd. Chennai
China Steel Corporation India Pvt. Ltd.
Continental Automotive Brake Systems, Gurgaon
, D-Link ( India) Ltd. Karnataka
Delta Electric Corporation, Channai
Electro-Scientific Solutions, Agra
Electronics & Radar Development Estt., Bangalore
3
1
1
2
1
1
4
1
5
6
1
1
7
61
11
2
6
3
2
3
1
1
2
1
1
1
1
4
1
3
1
1
2
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
Encardio-Rite Electronics(P) Ltd. Lucknow
F. J.Tech Pvt. Ltd. Bangalore,
.Gallium Arsenide Eanabling Tech Centre, Hyderabad
Goodrich Aerospace Services Pvt. Ltd., Bangalore
GVK Metal Form (P) Ltd., Jalandhar
Hindustan Aeronautics Ltd., Hyderabad
Hindustan Aeronautics Ltd., Korwa
Hi-Rel Tech Private Limited, Hosur
Indian Institute of Science Education & Research Mohali,
Indian Institute of Technology, Chennai
Indian Institute of Technology. Hyderabad
Indian Institute of Technology. Mumbai
Indian Institute of Technology, Roorkee
Infineon Technologies India Pvt. Ltd., Bangalore
Institute of Plasma Research, Gandhinagar
Ind Sphnix Precision Ltd., Parwanoo
Innove3D Private Ltd., Pune
Iqor Global Services Pvt. Ltd., Gurgaon
Instruments Research & Development Est , Dehradunt.
ISRO Inertial System Unit Trivandrum,
KELTRON, Trivandrum
KMV Vacuum Technologies, Bangalore
Kokuku Intech India Pvt. Ltd., Alwar
Liquid Propulsion Systems Centre, Trivandrum
Locolines, Vijaywada
Logic Solutions, Ernakulam
Lucas-TVS Limited, Pondicherry
Maestros Electronics & Telecom System Ltd., Mumbain
Mar Baselios College of Engineering, Trivandrum
Maytech Systems, Hyderabad
Meenakshi Metal Forms, Pune
., HyderabadMerritronix Pvt. Ltd
Micropack Pvt. Ltd., Bangalore
Motherson Sumi Systems Ltd., Noida
2
1
5
5
5
38
57
1
3
1
5
2
2
1
1
1
1
2
6
13
4
1
1
10
4
3
1
1
1
1
1
1
1
1
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Partial User References (not complete list) of our Dehumidifying Dry Cabinetsreliable & caring since 1976
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
16
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes any mechanically damaged part.
Customer’s Name & CitySNo. QtyCustomer’s Name & CitySNo. Qty
MRM Procom Pvt. Ltd., Faridabad
O/E/N Connectors Limited, Ernakulam
Olympus Medical Systems India Pvt. Ltd. Gurgaon,
, PCP Electronics (P) Ltd. Mysore
Physical Research Laboratory, Ahmedabad
Prama Hikvision India Pvt. Ltd., Palghar
Quantum SMT Technologies Pvt. Ltd., Gurgaon
Raja Ramana Centre for Advanced Tech Indorenology,
Rajshree Electro-Systems Thane,
Raman Research Institute, Bangalore
BARC thru , Rajshree Electro-Systems Thane
Rashi Peripherals Pvt. Ltd. Chandigarh,
Refurb Tech, Chennai
Research Centre Imarat, Hyderabad
Saalfo Tech Pvt. Ltd., Mysore
Sahajanand Laser Technology Ltd. Gandhinagar,
Salzer Electronics Ltd., Unit-II, Coimbatore
Secure Meters Ltd., Udaipur
Sai Techno Vision, Panvel
Sentec India Co. Pvt. Ltd., Manesar
Shakti Pumps (India) Limited, Pithampur
S. H. Enterprises, Mumbai
Shiv Nanadar University UP,
Sidhi Vinayak Enterprises, Chennai
Sivavasu Industries Trivandrum,
SLN Technologies Pvt. Ltd. Bangalore,
Solid State Physics Lab Delhioratory,
Space Application Centre, Ahmadabad
Spectrum Infotech Pvt. Ltd., Bangalore
SS Technology, Mysore
Sumitron Expor ts Pvt. Ltd. Delhi,
TAK Technologies Pvt. Ltd. Noida,
The Controller of Stores & Purchase Thiruvanantha, puram
Thermosystems, Trivandrum
1
1
6
1
3
4
1
10
2
1
2
3
1
2
1
1
1
1
1
1
1
1
27
1
1
1
2
4
2
1
1
2
1
1
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
, Toshiba Transmission & Distribution Medak Distt. (TG)
Trident Infosol Pvt. Ltd., Bangalore
Tymtix Technologies Pvt. Ltd., Bangalore
Vanimadhav Moolchand Suppliers, Kanpur
, Vikram Sarabhai Space Centre Trivandrum
Young India Power Pvt. Ltd. Kolkata,
1
1
1
1
53
1
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
• Power & Control Unit• Soldering Pencil Soldering Tip fitted with • Iron Holder with Cleaning Sponge
Scope of Supply
Rugged 3-digit 7-segment E dL D isplay for SET and
ACTUAL temperatures Displays actual temperature
L Digital DisplayED
The Soldering Station has in-built digital temperature offset provision during calibration to meet ISO9000 requirements. Customer does not need to open the unit and adjust the trim pots.
Temperature Offset for Calibration
Password Protection
The Soldering Station has provision of password locking. After password locking,
operator cannot change the programming parameters
Error Messages
The Soldering Station has self diagnostic feature. It displays the fault of the Soldering Pencil. If the display shows H-E, it means Heating Element is faulty.And if it shows S-E, it meansTemperature Sensor is faulty.
Optional SMD Thermal Tweezer ITW50 can be connected with Controller for reworking
S , Oof MD Chip Capacitors Chip Resistors, SOD Diodes, SOT Transistors and S ICs
How it works:1. Switch ON Power and
set desired temperature.2. Grip the chip component
and hold for few seconds till solder melts
3. Pick up chip component.
Variety of SMD Tip inserts to suit different components
Mini SOT SOT 23 DPAK SO 20
• Power Input Supply • Temperature Range•
: 50 Watt: 220VAC, 50Hz: upto 480°C
Specifications
• Twin-tube Tip Inserts heat SMD Chip components directly without disturbing adjacent components.
Features
SMD Chips
RoHSCompliant
L E A D
F R E E
• Power Input Supply• Temperature Range• Temperature Stability• Tip to Ground Potential• Tip to Ground Resistance •
: 90 Watts: 230 VAC, 50 Hz: 80°C ~ 480°C: ±2% of final value : < 2mV: < 2 Ohm
Specifications
Low Cost High Production Workhorse Soldering Station Model DSS36
Low capital investment + low running cost, uses lower priced Soldering Tips
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
reliable & caring since 1976
immediate Deliveryfor high quantity
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074517
Click here to view Video
Few 1000's working reliably all over India in repeat...repeat orders with high quantity users. See partial user list enclosed here. Main Control/Display PCB does not fail which customers frequently face with light weight competitors' Soldering Stations.
Much lower priced high quality Soldering Tips available with immediate delivery as we keep high quantity in stock.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable
/Desolderingparts as Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges etc.
Low capital investment + low running cost, uses lower priced Soldering Tips
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
reliable & caring since 1976
Low Cost High Production Workhorse Soldering Station Model DSS36
18
Useful Tip Inserts for SMD Thermal Tweezer ITW50 for reworking of SMD Chips and SOICs
P/N Size (A) Shape Applicable for
A1388
A1380
A1384
A
A
1.5mm
8mm
20mm
Diagram
SMD Chips
8 Pin SO ICs
20 Pin SO ICs
Wide range of Soldering Tips for different soldering applications
Part Number
960-T-0.8D0.8
Chisel Tip for leadfree soldering
Width A (mm)Description Dimensional DiagramActual Picture
0.517mm
17mm0.5
17mm0.5
17mm0.5
960-T-1.6D1.6
Chisel Tip for leadfree soldering
Chisel Tip for leadfree soldering 960-T-2.4D2.4
Chisel Tip for leadfree soldering 960-T-3.2D3.2
25mm0.7
Long Chisel Tip for leadfree soldering 960-T-1.2LD1.2
Sloped Tip for Solar Panels 17mm
960-T-3CØ3
Sloped Tip for Solar Panels
Sloped Tip for Solar Panels
17mm960-T-4CØ4
17mm960-T-5CØ5
Round Tip for fine soldering 960-T-IR0.5
R0.5
17mm
215mm
Round Tip for fine soldering 960-T-BR2.0
R0.5
17mm
Knife Tip for SMD soldering 960-T-K5.0
Tip for SMDSoldering
960-T-3CMØ3
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable
/Desolderingparts as Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges etc.
Low capital investment + low running cost, uses lower priced Soldering Tips
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
reliable & caring since 1976
Assured availability, normally ex-stock, of Spare Parts for Soldering Pencil
Barrel & Nut Assembly
Heater Enclosure
Heating Element
Cord with Connector
Description Remarks
Whenever required
Whenever required
Replace if display shows H-E/S-E
Whenever required
Low Cost High Production Workhorse Soldering Station Model DSS36
19
Scope of Supply
Specifications
• Measures soldering tip temperature quickly• Auto shut-off function, MAX HOLD s Both Celsius and Fahrenheit types readings possible.•
and K-type & Star type thermocouples for surface tip temperature measurement •
Digital Calibration Meter• • K-type Thermocouple Star type Temperature Sensors set of 10 pcs•
• Resolution Measurement Range• Accuracy• Sensor• Battery Indication• Power Supply• Dimensions/Weight•
: 1°C (1°F): 0~800°C (32~1 °F)500: ± °C ± °5 ( 10 F): K-type Thermocouple: Alarm: 9 Volt DC Battery: 14 x35x8 mm 250 grams (approx.)7 5 /
K-type Thermocouple
Low Cost and popular Digital Calibration Meter for Soldering Stations P/N: I191-AD
Temperature Sensors (star type)
P/N: 192-212
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Actual Picture
DSP36 Soldering Pencil
Whenever required
Connector Assembly Whenever required
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable
/Desolderingparts as Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges etc.
Partial User References (not complete list) of our DSS36 Soldering Stationreliable & caring since 1976
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Warranty is 12 months from the date of invoice. It excludes all consumable /Desolderingparts as Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges etc.
20Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Customer’s Name & CitySNo. Qty
509 Army Base Workshop, Agra
Aadd Technologies Pvt. Ltd.
Accel Systems, Pune
Accelor Microsystem, Chandigarh
Ace Sales Corporation, Faridabad
Adarsha Workshop, Bangalore
ACD Communication Secunderabad
ADC India Communications Ltd., Bangalore
ADI Electronics Manufacturing Tech. Pvt. Ltd., Bangalore
Adroit Control Engineers Pvt. Ltd., Faridabad
Air Force Station, Kumbhigram, Assam
All India Radio and Television, Chennai
Allengers Medical Systems Ltd., Derabassi
Allengers Global Healthcare Pvt. Ltd., Baddi
Alpha Design Technologies Private Ltd., Bangalore
Alpha Electronics, Jaipur
Amarjit Singh, Jalandhar
Altoo Research Pvt. Ltd., Gurgaon
Ammini Energy Systems Pvt. Ltd., Kerala
Amanpreet Singh, Bareli
Amrita Research Lab.
Amatra Digital Gadgets Pvt. Ltd., Bangalore
Anand Industrial Enterprises, Bangalore
Anshul Entreprises
Andy Solar P Ltd., Panchkula
Anuvidyut Private Ltd., Roorkee
Apex Electronics, Secunderabad
Apex Electronics, Solan
Applied Technosystem, Gurgaon/Faridabad
Aparajita Electronics
Arcomm Tech Solutions Pvt. Ltd., Chennai
Aristocrat Technology India Pvt. Ltd., Noida
Army Base Workshop, Akhnoor
Army Field Workshop, Amritsar
Army Field Workshop, Manipur
Ascenion Electronics, New Delhi
Asquire Automation Systems, Faridabad
Avnet India Pvt. Ltd., Bangalore
Aya Singh, Chandigarh
Bagla Electricals and Electronics Pvt. Ltd., Aurangabad
Balaji Sales, Indore
Beas Hospital, Beas
BG-LI-IN, Aurangabad
BG Tronics, Hyderabad
Bharat Electronics Ltd., Bangalore
BioGenex Lift Sciences Pvt. Ltd., Hyderabad
Bits N Bytes Soft Private Limited, Gurgaon
1
4
2
1
5
1
1
2
8
6
2
1
20
6
4
2
1
2
3
3
3
3
46
1
11
6
2
9
4
5
2
2
4
1
1
1
1
1
1
1
13
2
2
1
1
1
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Customer’s Name & CitySNo. Qty
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
Blue Chip Electronics, Secunderabad
Raja Rammana Center for Advanced Technology, Indore
Bandesha Enterprises
Cenzer Industriers Ltd., Mumbai
Century LED Ltd., Howrah
Cetronics Technologies Pvt. Ltd., Trivandrum
Chara Technologies, Chennai
Champion Trading Co., Panchmahal (Gujarat)
Chloride Power Systems and Solutions Ltd., Kolkata
CLS Industries, New Delhi
Continental Automotive Comp (I) Pvt. Ltd., Bangalore.
Coramondal Electronics, Chennai
Crompton Trading Co., Bangalore
C&S Electric Ltd., Noida
Cyber Communication
Cygni Energy Pvt. Ltd., Hyderabad
Cyient DLM Pvt. Ltd., Mandya
Cypress Semiconductor Technologies P. Ltd., Bangalore
Data Care Systems Pvt. Ltd., Bangalore
Data Care Networks, Bangalore
DCIO, Imphal
Deciblepro Pvt. Ltd., New Delhi
Deepak Enterprises, Ferozpur
Department of Atomic Energy, Chennai
Defence Electronics Applications Lab., Dehradun
Defence Electronics Research Laboratory, Hyderabad
Delta Systems
Dinesh Electronics, Coimbatore
thru Divine Techno EngineersRotex, Vadodara
Matrix Telecom, Vadodara thru Divine Techno Engineers
Divine Techno Engineers, Vadodara
Durga Communication
Dynalog India Ltd., Mumbai
Dynamic Trading Co., Pathankot
Ecotech Industris Pvt. Ltd., Pithampur
EECO Insta Power Pvt. Ltd., Alwar
E6 Energy, Mohali
Electrical Controls & Systems (Unit-II), Vadodara
Electronic Relays (India) Pvt. Ltd., Bangalore
Eltrac Technologies Pvt. Ltd., Bangalore
Embedded Controls, Mohali
EME Workshop, Delhi Cantt
EME Workshop, Meerut
EME Workshop Tamulpur Assam
Emmvee Photovoltaic Power Pvt.Ltd., Bangalore
EON Electric Ltd., Haridwar
Epcos India Private Limited, Nashik
281
1
1
2
61
1
1
4
1
12
2
4
2
21
3
2
20
5
5
2
1
1
3
5
1
1
2
1
2
10
36
1
2
1
1
91
3
26
31
2
16
1
3
1
4
10
104
Partial User References (not complete list) of our DSS36 Soldering Stationreliable & caring since 1976
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Warranty is 12 months from the date of invoice. It excludes all consumable /Desolderingparts as Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges etc.
21Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
SNo. Qty
E Power Technologies Pvt. Ltd.,Bangalore
Ess Dee Industries, Aurangabad
ESS ESS Enterprises, Fazilka
ETOE Interconnections Pvt. Ltd.,Bangalore
Excel Autocomp Industries Pvt. Ltd., Chakan
Excel-Par Electronics Pvt. Ltd., Mysore
Ever Electronics Pvt. Ltd., Pune
Evitha, Bangalore
Filatech Enterprises Pvt. Ltd., Gurgaon
Finlabs Audio (P) Ltd., Mohali
Flin Technology Pvt. Ltd., Mumbai
Garden Reach Shipbuilders & Engineers Ltd., Kolkata
Gautam Solar Pvt. Ltd.
Genus Innovation Limited, Haridwar
Genus Power Infrastructures Ltd., Haridwar
Genus Power Infrastructures Ltd.,Guwahati
Genus Power Infrastructures Ltd., Jaipur
Gilbarco Veeder Root India Pvt.Ltd., Coimbatore
Global Electronics Solution Pvt. Ltd., Bangalore
GM Solar Power, Bangalore
Girimaji Equipment, Bangalore
Gobind Electronic Controls, Ludhiana
Goodrich Aerospace Services Pvt. Ltd., Bangalore
Green Brilliance Energy Pvt. Ltd., Vadodara
GreenPole Power Solutions, Bangalore
Goyal Enterprises, Chandigarh
Gupta Mobile Shop, Ludhiana
Halonix Technologies Pvt. Ltd., Haridwar
Hanuman Electronic Components Pvt. Ltd., Mumbai
Harness Overseas Pvt. Ltd., Mohali
HCL Technologies Ltd., Chennai
HD Medical Services (India) Pvt. Ltd., Bangalore
Highline Engineers, Visakhapatnam
Himachal Energy Private Ltd., Solan
Himalyan Auto, Guwahati
Hind Rectifiers Ltd., Mumbai
Hindustan Aeronautics Ltd., Bangalore
Hindustan Aeronautics Ltd., Hyderabad
Hindustan Aeronautics Ltd., Korwa
Hi-Rel Tech Private Ltd.,Husur
Honeywell Technology Solutions Lab Pvt. Ltd., Bangalore
HPL Electric & Power Pvt. Ltd., Sonepat
H Ratilal & Co., Mumbai
Icomm Tele Ltd., Hyderabad
IE Power Technologies Pvt. Ltd., Bangalore
Imagin Technology, Bangalore
Incredible Advance Technologies Pvt. Ltd., Hyderabad
1
3
3
6
1
2
10
2
3
2
1
6
61
6
139
19
30
1
2
25
1
1
5
5
1
1
1
2
1
1
4
1
4
44
2
7
3
2
56
1
2
55
4
2
2
4
2
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
SNo. Qty
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
Indian Institute of Science, Bangalore
Indian Institute of Science Education Research, Mohali&
Indian Institute of Technology, Chennai
Indian Institute of Technology, Kanpur
RoorkeeIndian Institute of Technology,
Icomm Tele Ltd., Hyderabad
IND Micro Devices, Kolkata
India Metalman Software Pvt. Ltd., Chennai
Indian Institute of Technology, Varanasi
Innovative Solution, Chennai
Instruments Research Associates Pvt. Ltd., Bangalore
JSN Solutions, Gandhinagar
Jassi Electronics
JST Enterprises, Chennai
JV Enterprises, Bangalore
Jyoti Electrocom, Kolkata
KC Electro Lab
Kaizan Switchgear Products, Vadodara
Kalika Electricals & Electronics, Delhi
( )Kaynes Interconnection Systems I Pvt. Ltd., Bangalore
Kaynes Technologies India Pvt. Ltd., Mumbai
Koti Systems, Bangalore
Konark Industria Pvt. Ltd., Bangalore
Krishna Traders, Amritsar
Army Workshop Patiala thru Lalit Gases, Patiala
Lalit Kumar Jain, Agra
Landis Gyr Ltd., Kolkata
Larsen & Toubro Ltd., Mysore
Lifetex Medical Systems (P) Ltd., Mysore
Lineage Power (I) Pvt. Ltd., Bangalore
Lansar Business Solutions, Surat
Lapp India Pvt. Ltd., Bangalore
Luminous Power Technologies Pvt. Ltd., Baddi
Luminous Power Technologies Pvt. Ltd., Gagret
Lapp India Pvt. Ltd., Bangalore
Mag Power, Pune
Margen Impex Ltd., Gujarat
Mascot Marketing, Ahmedabad
Melange Systems Private Ltd.-Bangalore
Master Control Facility, Hasan
Methode Electronics India Pvt. Ltd., Bangalore
Mettwa Electricals & Appliances Pvt. Ltd., Delhi
Micronics, Hyderabad
Micro Technologies, Mysore
Mikado Electronics, Kolkata
Mikronix Gauges Pvt. Ltd., Aurangabad
Mitsuba Sical India Ltd., Chennai
1
1
29
1
2
1
4
1
1
1
6
1
1
5
2
1
1
2
1
50
11
2
1
1
1
1
9
78
1
39
1
1
75
30
1
2
1+3
1
1
7
3
2
5
1
8
1
1
Customer’s Name & City Customer’s Name & City
Partial User References (not complete list) of our DSS36 Soldering Stationreliable & caring since 1976
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Warranty is 12 months from the date of invoice. It excludes all consumable /Desolderingparts as Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges etc.
22Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
SNo. Qty
Maxeye Technologies Private Limited, Bangalore
Melange Systems Pvt. Ltd., Bangalore
Modern Hi-Tech Systems, Chandigarh
Modi International, Guwahati
Molex India Pvt. Ltd., Bangalore
Monolithic Power Systems, Bangalore
Moser Baer India Limited, Noida
Motherson Sumi Systems Ltd., Faridabad
, NoidaMotherson Sumi Systems Ltd.
Mr. Karan Sekhri, Jammu
MRM Procom Pvt. Ltd., Faridabad
Multilink, Mysore
Multitech, Pathankot
Army Workshop Jammu
Mr. Prasanth Nair, Nellore
Mr. Venkat, Bangalore
Mr. Vikas, Chandigarh
MRO-TEK Limited, Bangalore
Multilink, Mysore
Nahar Industrial Enterprises Ltd., Lalru
Northsun Solar Corporation, Mohali
Next Generation Systems
NTEX Marketing
Nucon Aerospace Pvt. Ltd., Hyderabad
Nutronix Corporation, Ahmedabad
O/E/N India Ltd., Ernakulam
Om Agencies, Kanpur
Orange Sorting Machines India Pvt. Ltd., Coimbatore
Orbit Tele Systems, Amritsar
Panecea Medical Technologies Pvt. Ltd., Karnatka
Paras Wires Private Ltd., Bangalore
Pavan Supply Corporation, Assam
Pearl Electronics and Power System, Roorkee
Peninsula Electronics, Bangalore
Perto India Pvt. Ltd., Jaipur
Phoenix Contact India Pvt. Ltd., Palwal
Powermate Devices, Pune
Power & Controls, Kolkata
Prasad Sales & Marketinig, Rajathan
PRADEEP KUMAR, Ludhiana
Premier Electronics
Prince Switchgear, Ankleshwar
P. S. Computers, Pathankot
Pulse Engineering, Mohali
Pushwinder Singh
Probus Smart Things Pvt. Ltd., New Delhi
Proteck Machinery Pvt. Ltd., Chennai
1
2
1
1
12
1
7
1
2
2
5
5
2
7
1
2
2
3
7
2
1
2
1
1
11
1
1
1
1
1
2
24
1
14
10
2
4
2
1
3
1
1
1
1
1
4
2
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
SNo. Qty
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
PT Communications Systems Pvt. Ltd., Delhi
PVR Controls, Mumbai
Quntum Power Systems
Rahul Vijayaraghavan, Bangalore
Rainbow Denim Limited, Lalru
Mazagaon Dock Ltd., Mumbai
Bhabha Atomic Research Center, Mumbai
Raja Ramanna Centre for Advance Technology, Indore
Rajshree Electro-Systems, Thane
R K Enterprises, Bangalore
Ramtel Solution, New Delhi
Rangsons Electronics Pvt. Ltd., Mysore
ReNew Services Pvt. Ltd., Bhopal
RenewSys India Pvt. Ltd., Hyderabad
Rensyn Green Energy Private Limited, Udaipur
Revon Computer, Chandigarh
RK Fabricators, Bangalore
Rise Appliances Pvt. Ltd. Noida
Rishab Industries, Goa
Rishi Spinning Pvt. Ltd., Chennai
RIZZIN Technology Pvt. Ltd., Bangalore
Rober t Bosch Engg. & Business Solutions, Bangalore
R.R. Engineering & Consultants, Bilaspur
Rudra Microwave Products, Hyderabad
Saalfo Tech. Pvt. Ltd., Mysore
Salzer Electronics Ltd., Coimbatore
Sambe Electronics Pvt. Ltd., Nashik
Saatvik Green Energy Pvt. Ltd., Ambala
Sangeeta Electronics, Chandigarh
Saugata Ghosh, Kolkata
Sankalpa Lighting Solution LP, Secunderabad
Sanghwal Sales Corp., Pathankot
Saurer Textile Solutions Pvt. Ltd., Ahmedabad
Saurer Textile Solutions Private Limited, Mohali
Saurer Textile Solutions Pvt. Ltd., Coimbatore
SBOA School & Junior College, Tamil Nadu
Schneider Electric India Pvt. Ltd., Bangalore
Secure Meters Ltd., Udaipur
Sedemec Machatronics Pvt. Ltd., Pune
SGS Tekniks Manufacturing Pvt. Ltd., Manesar
Shapetronics Services Pvt. Ltd., Mysore
Shalin Anand SLD, Chandigarh
Shree Pooja Industries, Mumbai
Shree Raghavendra Technical Services Ltd., Ahmedabad
Shreesai Enterprises, Palghar Maharastra
Shree Pactronix Ltd., Pathampur
Shri Balaji Enterprises, Ferozpur
3
8
2
1
1
10
9
2
15
1
5
24
2
1
1
1
1
5
1
1
3
1
1
4
13
5
42
62
1
3
5
3
13
8
10
1
1
1
13
1
2
1
1
1
15
1
1
Customer’s Name & City Customer’s Name & City
Partial User References (not complete list) of our DSS36 Soldering Stationreliable & caring since 1976
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Warranty is 12 months from the date of invoice. It excludes all consumable /Desolderingparts as Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges etc.
23Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
SNo. Qty
Shriganesh Textile & Infra India Pvt.Ltd.,
Shiv Nadar University, Noida
Shiv Sales, Zirakpur
Shree Pacetronic Ltd., Pithampur
Silk Fabric and Fashions, Salem
Shylendra Electronics, Bangalore
SIET Transformers Pvt.Ltd.,
Siricom Techonologies Pvt. Ltd., Bangalore
Skanray Technologies Pvt. Ltd., Bangalore
SNA Power Engg. Pvt. Ltd., Chandigarh
SNS Industries, Bangalore
Society for Integrated Circuit Technology, Bangalore
Solana Solar Power, Bangalore
Sonodyne International Pvt. Ltd., Mumbai
Air Force Station Chandigarh
Solid State Physics Lab, Delhi
SFO Technologies Pvt. Ltd., Cochin
Solphin India Pvt. Ltd., Faridabad
SPM Systems, Gandhinagar
S.S Global Solutions
SS Technologies, Mysore
Standard Loadcells, Vadodara
Suman Electronics, Thane
Sumukha Solutions, Bangalore
Surinder Kumar, Chandigarh
Swiss Elmech Private Limited, New Delhi
Synergy Enterprises, Chandigarh
Syscon Insturments Pvt. Ltd., Bangalore
Tata Consultancy Limited, Bangalore
Tata Elxi Ltd., Bangalore
Technilab Instruments, Bangalore
Teknix Electronics, Calicut
Tescom, Bangalore
Tessolve Semiconductor Pvt. Ltd., Bangalore
The Motwane Manufacturing Co. Pvt. Ltd., Nashik
Titan Company Ltd., Bangalore
Transducers & Allied Products, Bangalore
Triphase Technologies Pvt. Ltd., Parwanoo
Trylo Industries, Surendranagar
TSI Elecpower Pvt. Ltd., Vadodara
TVS Training and Services Ltd., Chennai
Tycon Innovations Technology, Mysore
Tymtix Technologies Pvt. Ltd., Bangalore
Unique Communication & Traders, Arunachal Pradesh
Universal Traders, Zirakpur
&University Institute of Advanced Research Gandhinagar
U R Rao Satellite Centre, Bangalore
1
5
1
2
1
1
2
1
3
1
4
1
10
13
6
1
3
1
1
5
1
2
21
1
1
7
2
1
1
1
5
1
68
2
3
1
2
14
1
2
6
4
1
5
1
10
1
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
SNo. Qty
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
Veeyes Electronics Pvt. Ltd., Bangalore
Versabyte Data Systems Pvt. Ltd., Bangalore
V-Guard Industries Limited, Cochin
CoimbatoreV-Guard Industries Limited,
Vidya Academy of Sci & Tech , Thiruvananthapuram. .
Vikas Instruments, Kolkata
Victor Services Media Shop, Jalandhar
Vinyas Innovative Technologies Pvt. Ltd., Mysore
Volvo India Pvt. Ltd., Bangalore
Vyoda Pvt. Ltd., Mysore
Walnut Medical Pvt. Ltd., Ambala
Wylie Indicators Limited, Ghaziabad
Yokogawa India Ltd., Bangalore
Zonje Solar LLP, Bangalore
Zreyas Technology Private Limited, Kolkata
1
8
4
1
6
15
1
45
1
2
6
2
2
15
4
Customer’s Name & City Customer’s Name & City
reliable & caring since 1976
Model DSSLF is a alue- or- oney (VFM) Soldering Station with intelligent features as supervisor can program 120 V F Mtwo most commonly used production process temperatures for instant recalling during operation. He can also lock limits of temperature range (i.e if he sets mode 01 or 11 for upper temperature limit of 400°C, operator cannot solder beyond that temperature). It displays both SET temperature and ACTUAL temperatures simultaneously. It also has in-built digital temperature offset calibration feature to meet ISO 9000 requirements. Unique integrated design of Soldering Tip, Barrel and complete encasing of Metallic Heating Element, provides reliable soldering joints with higher production rate.
Main Power Control Unit also has EMI & & Surge Suppression Filter to suppress transients of mains power line.
Scope of Supply
• ESD Safe Main Power & Control Unit
ESD Safe light weight Soldering Pencil •
fitted with 200G-2.4D Chisel 2.4mm Soldering Tip
Combined Dry & Wet Tip Cleaner Support Rack•
Salient Features
Power/Control unit has in-built following features: - Password protection - In-built temperature calibration - Sleep Timer for longer life - Error message indication - One touch temperature recalling
Similar European Soldering Stations are 3 times costlier
Reliable heating element does not require frequent changing
Low running cost due to low priced/long life soldering tips
Every spare part is available ex-stock to minimize down time.
Integrated single piece Tip & Barrel fully encase Metallic Heating Element. This uniqueness results in high heat energy storage for faster heat transfer
Very lightweight Soldering Pencil & easy-to-replace Plug-in type Heating Element
Ultra-fast Thermal Recovery 120 Watt S 120ESDoldering Station Model DSSLF
Specifications
• Power Temperature Range• Temperature Stability• Tip to Ground Potential• Tip to Ground Resistance•
: 0 Watts 12: 100°C ~ 500°C: ± 2% of final value: < 2 mV: < 2 ohm
RoHSCompliant
L E A D
F R E E
• It has a password locking function Push-button control with an auto-sleep function• Various types of long life Soldering Tips available•
Features• Lightweight and comfortable for fatigue-free working
Real and fully electrostatic safe ESD design• in-built calibration feature to meet ISO requirements•
Hi-end Leadfree SolderingAerospace high reliabilty soldering on Ceramic substrates Monocrystalline PV Solar Panel soldering
Multiple soldering applications with 120 Watt Soldering Station is suitable for SINGLEhighly reliable Aerospace soldering, SMD ICs, Solar Cells and High Mass soldering jobs
Socket to connect the grounding wire to meet the ESD requirements
is provided at the back side
Click here to view Video
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,Temperature Sensors, Soldering Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
24Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
124 3
Assured availability (normally ex-stock) of Spare Parts for Soldering Pencil
Heating Element
Temperature Sensor
Heater Enclosure
Cord with Connector
Description Remarks
Whenever required
Replace if display shows H-E
Whenever required
Whenever required
Actual Picture
DSPLF04A Soldering Pencil
Replace if display shows S-E
2
3
4
reliable & caring since 1976
Solder Feeder and attachment for Soldering Pencil
Standard type is for 0.8mm dia Solder Wire.Also available for 1.0/1.2/1.6/1.8/2.0 mm
Add to raise production rate to avoid solder wire wastage&optional Auto Solder Wire Feeder
Today’s highly competitive environment, always demand high possible productivity of each operators as well saving every paisa.
For such demanding requirements, the optionally available Auto Solder Feeder Model SFS81 with Digital Soldering Station DSSLF120 is the right choice. Besides it also increasing productivity of operator,
provides consistent quality for each solder joint as same amount of solder wire with pre-programmed feeding is applied.
Very lightweight Soldering Pencil & easy-to-replace Plug-in type Heating Element
Ultra-fast Thermal Recovery 120 Watt S 120ESDoldering Station Model DSSLF
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,Temperature Sensors, Soldering Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
25Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
Unbreakable, far longer life & lower pricedeating lement of Soldering PencilH E
Unique Soldering Tip for solderingultra-fine pitch large size SMD ICs
Specially designed 200G-CM SMD Soldering Tip has concave cavity to hold molten solder. It helps to solder one side of large size IC SMD completely in a single run by dragging Soldering Tip on all PCB pads smoothly to ensure bridge-less soldering
Unbreakable eating lementH E
in coiled form encased in metal tube
Sensor for precise control of temperature
Easy and faster change of Soldering Tip due to push fit design
Though rarely required to change, the Heating Elementhas its unique Push-fit designto ensure quick replacement.
reliable & caring since 1976
Part Number
200G- D0.80.8Chisel Tip for leadfree soldering B
C16
Width A (mm)Description Dimensional Diagram
200G-B
Tip for SMD Soldering
200G-3C
16
17
Round Tip for Fine Soldering
200G-2CM23
Ø0.5
Long Chisel Tipfor heavy masssoldering B
C 200G-5LD5.0
Ø3
Actual Picture
200G- D1.21.2B
C16
Chisel Tipfor leadfree soldering
B
C16
200G- D1.61.6Chisel Tipfor leadfree soldering
200G- D2.42.4B
C16
Chisel Tipfor leadfree soldering
Sloped Tip for Solar Panels
B
C16
Chisel Tipfor leadfree soldering
200G- D3.23.2
200G-4.2D4.2B
C16
Chisel Tip for heavy masssoldering
16
200G- C4Ø4
200G- C5Ø516
Sloped Tip for Solar Panels
Sloped Tip for Solar Panels
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,Temperature Sensors, Soldering Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
26
Wide range of Soldering Tips are available for different applicationssoldering
Very lightweight Soldering Pencil & easy-to-replace Plug-in type Heating Element
Ultra-fast Thermal Recovery 120 Watt S 120ESDoldering Station Model DSSLF
Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
Customer’s Name & CitySl. No. Qty
ADI Electronics Manufacturing Tech Pvt. Ltd., Bangalore
Astra Microwave Products Ltd., RR Distt.
Blue Chip Electronics, Secunderabad
Greenfuel Energy Solutions Pvt. Ltd., Gurgaon
Hero Motocorp Ltd.,Jaipur
Hi-Rel Tech Pvt. Ltd., Hosur
Icon Power Solutions (P) Ltd., Gurgaon
Mersen India Pvt. Ltd., Bangalore
Nutec Urethane,Bangalore
Salzer Electronics Ltd. ,Coimbtour
Sark Telecom,New Delhi
Sasmos HET Technologies Pvt. Ltd., Bangalore
Saurer Textile Solutions Private Limited, Mohali
Saurer Textile Solutions Pvt. Ltd, Ahmedabad
Sealed Energy Systems, Ambala Cantt
Secure Meters Limited, Udaipur
Skanray Technologies Pvt. Ltd.,Mysore
Syrma Technology Pvt. Ltd., Barpur, Krishnagiri
Syrma Technology Pvt. Ltd., Bawal
Syrma Technology Pvt. Ltd.,Chennai
Tessolve Semiconductor Pvt. Ltd., Bangalore
United Telecom Limited., Bangalore
Wings Automobile Products Pvt. Ltd.,Faridabad
6
10
7
7
3
1
1
1
1
2
1
11
1
1
4
10
1
40
5
282
5
6
22
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,Temperature Sensors, Soldering Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
reliable & caring since 1976
Partial User References (not complete list) of our 120 Watt Soldering Station
27Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
High Mass Automotive Components soldering Power Capacitors soldering Solar Panels & Cells reliable soldering
Hi-Power 150 Watt Digital Soldering Station Model DSSHP03G
Custom designed Soldering Tips can be also made on special request with MOQ.
Model DSSHP03G Soldering Station is best value-for-money in place of investing in 3~4 Soldering Stations as this one single Soldering Station is adequate to achieve similar production rate because of its faster thermal recovery and higher heat power. Additionally it has higher temperature range upto 500°C to do heavy mass type soldering jobs. Other features are: In-built Temperature Off-Set for Digital Calibration to meet ISO requirements, in-built function of Auto-Sleep and Auto Shut-Off which get activated automatically. Upto 16 mm wide Chisel type Soldering Tips are available. Supervisor can lock the optimum process temperature so operator cannot change.
• DSSHP03G Power & Control Unit
DSP03G Soldering Pencil •
Soldering Tip •
• Heavy Duty Support Rack
Cleaning Sponge•
• Power Consumption
Temperature Range •
• Temperature Stability
Tip to Ground Resistance•
Tip to Ground Potential•
Dimensions(LxWxH)•
: 150 Watt, 220V/50Hz
: 50°C ~ 600°C
: ±2% of final value
: <2Ω
: <2mV
: 200 x 130 x 100mm
Specifications Scope of Supply
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,Temperature Sensors, Soldering Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
28
Our 150 Watt Soldering Station DSSHP03G is far ....... far reliable (Heating Element life and Circuit Board) than available in market at lower price but of low quality. Many customers later replaced low cost, low quality types with our Model DSSHP03G Soldering Station
reliable & caring since 1976
Heavy Duty Wobble-free Holder for Soldering Pencil
Digital display of temperatures
Pushbuttons for precise temperature control
Plug-in type Heating Element for easy change-over
Light Weight 150 Watt
Soldering Pencil
RoHSCompliant
L E A D
F R E E
Micro-controller based Control Unit with close loop precise PID temperature control
Metal Wool Dry Cleaner
Click here to view Video
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Barrel & Nut Assembly
Heater Enclosure
Heating Element
Description Remarks
Whenever required
Whenever required
Replace if display shows H-E
Actual Picture
DSP03G Soldering Pencil
Whenever required
Whenever required
Wide range of Soldering Tips for heavy mass soldering are available.normal to
Description Actual Photo ModelWidth (mm) Thick (mm) Dimensional Diagram
500-3.5DChisel Tip forLeadfree soldering 2.03.5
500- D52.55.02.5
5
4
Chisel Tip forFilm Capacitors
500- D4 -032.04.0Chisel Tip forFilm Capacitors 2
4
4
500-8D2.582.5
8
6
Chisel Tip forFilm Capacitors
3.542
- 500-7P-1Round Tipfor Solar
Ø7Ø7
Ø5Ø5
500-5CSloped Tip -
Ø4Ø4 500-4CSloped Tipfor Solar
-
Ø3Ø3 500-3CSloped Tipfor Solar
-
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,Temperature Sensors, Soldering Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
29
Hi-Power 150 Watt Digital Soldering Station Model DSSHP03G
Custom designed Soldering Tips can be also made on special request with MOQ.reliable & caring since 1976
Assured availability, normally ex-stock, of Spare Parts for Soldering Pencil
Cord with Connector
Temperature Sensor Replace if display shows S-E
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Customer’s Name & CitySNo. QtyCustomer’s Name & CitySNo. Qty
ABB Limited, Bangalore
ACE Antenna India Pvt. Ltd., Kanchipuram
ADI ELectronics Manufacturing
Aimtron Electronics Pvt. Ltd, Vadodara
Akal Industion, Phagwara
Alligator Designs Pvtd. Ltd., Bangalore
Amphenol Interconnet India Pvt. Ltd., Bangalore
Avant Computer Technologies Systems, Mumbai
Bagla Electricals and Electronics Pvt. Ltd., Aurangabad
Bharat Electronics Ltd., Pune
Bharat Electronics Ltd., Hyderabad
Bharat Dynamics Ltd., Hyderabad
Bharati Electricals (Unit-II) Vadodara
Balaji sales
BG-L -IN Electricals Limited, AurangabadI
Bharat Products, New Delhi
Blue Chip Electronics, Secunderabad
Century LED Limited, Hawrah
Chef Solutions, New Delhi
Chinar Enterprises, New Delhi
Continental Automotive Components (I) Pvt. Ltd., Pune
Cygni Energy Private Limited, Hyderabad
Defence Electronics Applications Lab., Dehradun
Denso India Pvt. Ltd., Noida
Department of Automic Energy
EFD Induction Private Limited, Bangalore
Electrical Controls & Systems (Unit-II, Vadodara
Electronics Corp. Of India Ltd., Hyderabad
Emitec Emission Control Technology )I) Ltd., Pune
EOS Power India Pvt. Ltd., Mumbai
Epcos India Private Limited, Bawal
Epcos India Private Limited, Nashik
Excel-Par Electronics Private Limited, Mysore
Fiber Optic Telecom Solutions, Secunderabad
Finlabs Audio (P) Ltd., Mohali
3
5
4
2
1
1
1
1
2
6
2
6
2
3
10
1
8
14
5
1
3
1
1
7
1
1
3
4
2
2
27
65
1
6
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
Genus Power Infrastructures Ltd., Guwahati
Genus Power Infrastructures Ltd., Jaipur
Genus Power Infrastructure Ltd., Haridwar
Gilard Electronics Private Limited, Mohali
Govindsons Intelligent Equipment Co., Ltd., Nashik
Green Brilliance Renewable Energy LLP, Vadodara
Harness Overseas Private Limited, Mohali
HPL Electric & Power Limited, Sonepat
HTL Limited, Chennai
Icon Power Solutions (P) Ltd., Gurgaon
–Workz Automotive Pvt. Ltd., BangaloreI
India Nippon Electricals Ltd., Hosure
Inductotherm (India) Pvt. Ltd., Ahmedabad
Institute of Plasma Research, Gandhinagar
Jaicom, Delhi
Jaivic Electromech Engg. Pvt. Ltd., Nashik
Jay Switches India Pvt. Ltd., Gurgaon
Johnson Lifts Private Limited, Chennai
Jyotitech Solar LLP, Mumbai
K-Three Appliance, Baddi
Kaizan Switchgear Products, Vadodara
Koti Systems, Bangalore
Landis + Gyr Ltd., Solan
Landis + Gyr. Ltd., Kolkata
Larsen & Toubro Ltd., Mysore
Larsen & Turbro Ltd., Mumbai
Live Braille Wearable Solutions Pvt. Ltd., Chandigarh
Lovely Electronics, Sahnewal, Ludhiana
Lucas TVS Ltd., Chennai
Lucas TVS Ltd., Pantnagar
Lucas TVS Ltd., Pondicherry
Marathon Electric India (P) Ltd., Faridabad
Mersen India Pvt. Ltd., Bangalore
Methode Electronics India Pvt. Ltd., Bangalore
Multitech, Pathankot
2
3
22
1
2
6
2
4
3
1
2
26
7
2
1
1
4
2
9
1
2
13
7
1
1
1
1
1
7
2
8
3
3
1
2
Partial User References (not complete list) of our 150 Watt Soldering Station reliable & caring since 1976
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,Temperature Sensors, Soldering Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
30Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Customer’s Name & CitySNo. Qty Customer’s Name & CitySNo. Qty
reliable & caring since 1976
Partial User References (not complete list) of our 150 Watt Soldering Station
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,Temperature Sensors, Soldering Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
31
Mundra Solar Pvt. Ltd., Mundra (Kutch)
National Aluminium Company Ltd., Angul (Odisha)
New Jonaki Electronics ,Tripura
Novateur Electrical & Digital Systems Pvt. Ltd., Nashik
Orange Sorting Machines (P) Ltd., Coimbatore
Parkinson-San Systems Pvt. Ltd., Bangalore
Powermate Devices, Pune
Picanol India Pvt. Ltd., Delhi
Pulse E Technologies Pvt. Ltd. Gurgaon
P.V. Power Technologies Pvt. Ltd., Thane
Rajshree Electro Systems, Thane
Rangsons Electronics Pvt. Ltd., Mysore
Research Centre IMARAT, Hyderabad
Rewnewsys Indian Pvt. Ltd., Hyderabad
Saint Gobain Glass India Ltd., Kanchipuram
Sasmos HET Technologies Pvt. Ltd., Bangalore
SATTVAeTECH India Pvt. Ltd., Bangalore
Saatvik Green Energy Pvt. Ltd., Ambala
Sasmos HET Technologies Pvt. Ltd., Bangalore
Schneider Electric India Pvt. Ltd., Bangalore
Secure Meters Ltd., Udaipur
Secure Meters Ltd., Sanand Ahmedabad
SGS Tekniks Manufacturing Pvt. Ltd., Manesar
Sieko-Maraica Electrical Mfg. India Pvt. Ltd., Chennai
Sigma Pi Power Pvt. Ltd., Chennai
Sona Electricals, Bhopal
Sona Koyo Steering Systems Ltd., Gurgaon
Southern Sensors, Chennai
Spot Trading Co., Delhi
Sumitron Expor ts Pvt. Ltd., Delhi
Sun Electromec Industries, Bangalore
Swelect Energy Systems Ltd., Bangalore
Synergy Enterprises, Chandigarh
Synthetic Moulders Ltd., Baddi
T.B.R.L.,Chandigarh
95
2
1
2
1
4
3
1
1
4
10
14
1
32
1
2
1
10
2
3
12
18
2
2
1
4
5
1
1
10
1
6
26
1
1
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
Tata Motors Ltd., Ahmedabad
Tata Power Solar Systems Ltd., Bangalore
TDK India Private Limited, Nashik
Techno Electromech Pvt. Ltd., Vadodara
Telmar Network Technology, Gurgaon
Transcon Interconnections Systems Pvt. Ltd., Bangalore
Usha Enterprises, Panchkula (for Essel Propack, Nalagarh)
Versabyte Data Systems Pvt. Ltd., Bangalore
Vikram Sarabhai Space Centre, Thiruvanthapuram
Viz Technologies Pvt. Lt., Hyderabad
Wings Automobile Products Pvt. Ltd., Faridabad
Yash Capacitors Pvt. Ltd., Nashik
Yash Enterprises, Pune
1
25
91
2
1
5
5
1
1
7
12
18
3
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Specifications
• Power
Input Supply•
Temperature Range •
• Temperature Stability
Tip to Ground Resistance•
Tip to Ground Potential•
: 320 Watts
: 220VAC, 50Hz
: 50°C ~ 600°C
: ±2% of final value
: < 2 Ohm
: <2mV
• Precise temperature settings by pressing push buttons
In-built temperature offset provision for digital calibration•
In-built programing functions of auto sleep and shut-off•
Supervisor can lock optimized process temperature•
• 6~12 mm wide Soldering Tips for different applications
Features
Few examples of Automotive omponents, Power Capacitors and Large Coils soldering applicationsC
ApplicationspecficSoldering Tips
Heavy Duty Soldering
PencilHolder
SET & ACTUALTemperatures
are digitallydisplayed
Digitized Pushbuttons
for precise temperature
control
Main Power & Control Unit
New Barrel & Nut design for
easy replacement of Soldering Tips
• Power & Control Unit
• Soldering Pencil
Soldering Tip 8 mm Chisel•
• Heavy Duty Support Rack
• Cleaning Sponge
Scope of Supply
for Auto Components, Power Capacitors & Coils soldering applications
320 Watt Soldering Station Model DSSHP300Very High Power
RoHSCompliant
L E A D
F R E E
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,Temperature Sensors, Soldering Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
32
reliable & caring since 1976
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Wide range of Soldering Tips for very high mass soldering applications are available.
502-8D8A
2.5
502-12D12A
2.5
Part NumberWidth A (mm)Description Dimensional DiagramActual Picture
Chisel Tip for leadfree soldering
Chisel Tip for leadfree soldering
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,Temperature Sensors, Soldering Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
33
for Auto Components, Power Capacitors & Coils soldering applications
320 Watt Soldering Station Model DSSHP300Very High Powerreliable & caring since 1976
Barrel & Nut Assembly
Heating Element
Description Remarks
Whenever required
Whenever required
Replace if display shows H-E
Actual Picture
DSP03G Soldering Pencil
Whenever requiredCord with Connector
Temperature Sensor Replace if display shows S-E
Assured availability, normally ex-stock, of Spare Parts for Soldering Pencil
Partial User References (not complete list) of our DSSHP300 Soldering Station
Customer’s Name & CitySNo. Qty
Balaji Sales, Indore
BG LI-IN Electricals Ltd., Aurangabad
Bharat Electronics Limited, Mumbai
Blue Chip Electronics, Secunderabad
GRD Induction, Jalandhar
Hindustan Aeronautics Ltd., Koraput Odisha
Koti Systems, Bangalore
Lead Enterprises, Bangalore
Nitin Jain, Nashirabad
Rangsons Electronics Pvt. Ltd., Mysore
1
1
5
8
1
3
3
1
1
1
1
2
3
4
5
6
7
8
9
10
Customer’s Name & CitySNo. Qty
11
12
13
14
15
16
17
18
19
RenewSys India Pvt. Ltd., Andhra Pradesh
Rishab Instruments Pvt. Ltd., Nashik
Schneider Electric India Pvt. Ltd., Bangalore
Secure Meters Limited, Ahmedabad
Secure Meters Limited, Udaipur
Synergy Enterprises, Chandigarh
TDK India Private Limited, Nashik
Terminal Ballastics Research Laboratory, Chandigarh
Voxelgrids Innovations Pvt. Ltd., Bangalore
2
5
5
6
8
1
44
4
2
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Digital Calibration Meter Model I191AD for Soldering Stationss reliable & caring since 1976
How to use
- Fit the star type Temperature Sensor
- Switch on the Calibration Meter
- Put a drop of solder on the soldering tip
- Put the hot soldering tip on the center of the sensor
- Display will show the tip temperature
- If you press the MAX HOLD button, it will hold the value of maximum
tip temperature
- To measure temperature of any surface/PCB, use the K-type Thermocouple
Spare Thermocouples (normally available ex-stock)
K-type Thermocouple
P/N: 191-211 tomeasure surface
temperature of PCBs
Star type Temperature
Sensors P/N: 192-212,
as replacement/spare
Scope of Supply
Specifications
Features
• Measures soldering tip temperature quickly Auto shut-off function prolongs the life of Battery.• Holds max temperature on pressing [MAX HOLD] Button.• Both Celsius and Fahrenheit types readings possible.• K-type & Star type thermocouples for surface and •
tip temperature measurement
Digital Calibration Meter• K-type Thermocouple for surface •
temperature measurement Star type Temperature Sensors set of 10 pcs•
for Soldering Tips temperature measurement
• Resolution Measurement Range• Accuracy• Sensor• Display• Battery Indication• Power Supply• Dimensions• Weight•
: 1°C (1°F): 0~800°C (32~1472°F): ±5°C: K-type Thermocouple: 3.5 digit LCD: Alarm: 9 Volt DC Battery: 146 x 35 x 83mm (approx.) : 250 grams (approx.)
K-type Thermocouple
Temperature Sensors
(star type)
K-type & Star type thermocouples for surface and tip temperature measurement
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
34
Warranty is 12 months from the date of invoice. It excludes consumable items as thermocuoples and any mechanical damaged part.
Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements, Temperature Sensors etc., Solder Cups
Specifications
Assured availability, normally ex-stock, of Spare Parts for Solder Pot Digital Model I100-15S
• Solder Bath internal dimensions: approx.95x135x60 mm (LxWxH) Temprature Range: 100°C ~ 450°C• Input Supply: 220V/50Hz•Power consumption: 600 Watt• Solder Pot Capacity: 5.5 kg (approx.)• LCD type Digital Display•
Spare Heating Element Spare Temperature Sensor
• Micro-controller based controls Closed loop temperature control•
• Anti-Corrosion high temperature resistant nanometric eramic oating c inside of Solder Bath
In-built digital temperature calibration •Rapid heating with stable temperature •
Features
RoHSCompliant
L E A D
F R E E
Spare Solder
Cup
Highly eliable Solder Pots r type unique Anti-Corrosion Lead Free
Expensive n c c solder baths anometric eramic oating prevents from corrosion
Digital Display, Closed Loop Temperature Control Solder Bath: 95x135 mm size, 600 Watt heatingModel I100-15S
reliable & caring since 1976
Model I100-15S is an excellent, portable and easy-to-use rectangular Solder Pot for leadfree and leaded soldering. It is ideal for wire tinning and for small PCB soldering and desoldering of components. This model is ideal for manufacturers seeking a cost-effective solution for pre-tinning components or wires.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
35
Temperature Sensor for precise temperature control
.
Digitized Push Buttonsfor temperature control
Digital Display for SET & ACTUAL Temperatures
Titanium Alloy Solder Pot with Anti- orrosion c
nanometriceramic oatingc c
Solder Dross Remover
Solder Bath size:95x135 mm
OFF Time: Solder Pot can be programmed for SWITCH-OFF
time. The Power of Solder Pot will automatically switched-off
after this set time. This time is adjustable from 000~999 hours.
Work Time: This shows the accumulative working time
of the Solder Pot
36 mm dia, 200 Watt Solder Pot with Anti-Corrosion Ceramic Coating Lead FreeModel SP-200
Solder Pot Size(approx.)Temperature rangeSolder CapacityInput SupplyPower Consumption
: 36mm dia x 30mm depth: 150° ~ 500°C: 650 gms (approx.): 220 VAC/50 Hz: 200 Watt
Specifications:
N availabilityormally ex-stock of Spare Parts
Temperature Sensor Heating Element
Anti- orrosion cnanometric eramic coatingc
RoHSCompliant
L E A D
F R E E
Spare Solder Cup
A large rectangular solder bath makes this
I100-15S a very versatile Solder Pot for leadfree
and leaded solders
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements, Temperature Sensors etc., Solder Cups While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
36
reliable & caring since 1976
Customer’s Name & CitySNo. Qty
ADI Electronics Mfg. Tech. Pvt. Ltd., Bangalore
ADS Sensortechnik Pvt. Ltd., Bangalore
Ananth Technologies Ltd., Trivandrum
Astra Microwave Products Ltd., Hyderabad
Avery India Limited, Ballabhgarh
BG LI-IN Electricals Ltd., Aurangabad
Blue Chip Electronic, Secunderabad
CG Cables & Wires India Pvt. Ltd., Bangalore
Control Print Limited, Nalagarh
DCX Cable Assemblies Pvt. Ltd., Bangalore
Divine Techno Engineers, Vadodara
Eaton Power Quality Pvt. Ltd., Pondicherry
Elin Electronics Ltd.,Ghaziabad
Ess Dee Industries, Aurangabad
Excel-Par Electronics Pvt.Ltd., Mysore
FCI OEN Connectors Ltd., Cochin
Flextronics Tech (I) Pvt. Ltd., Sriperumbudur
Fokkar Elmo Sasmos Interconnection Sys. Ltd., Bangalore
Goodrich Aerospace Services Pvt. Ltd., Bangalore
HTL Limited, Chennai
Hi-Rel Tech Pvt. Ltd., Hosur
Indelox Technologies Pvt. Ltd., Bangalore
Keltron Electro Ceramics Ltd., Kuttipuram, Kerala
Kent RO System Ltd., Noida
Lineage Power (I) Pvt. Ltd., Bangalore
Mag Power, Pune
Magnatech, Mysore
Magsol Technologies (P) Ltd., Bangalore
Mersen India Pvt. Ltd., Bangalore
Micropack Pvt. Ltd., Bangalore
Microtek International Pvt. Ltd., Parwanoo
MIL Power Converter Tech. India Pvt. Ltd., Gurgaon
Molex India Pvt. Ltd., Bangalore
1
1
1
2
1
1
2
2
1
3
2
1
20
3
25
1
2
1
2
2
1
1
1
6
1
3
4
1
1
1
1
1
45
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Customer’s Name & CitySNo. Qty
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
Moser Baer India Limited, Noida
Motherson Sumi Systems Ltd., Faridabad
Motherson Sumi Systems Ltd., Noida
Novateur Electrical & Digital Systems Pvt. Ltd., Jalgaon
Nuflex Electromagnetics Pvt. Ltd.,
Om Nano Tech Pvt.Ltd., Noida
Perto India Pvt. Ltd., Jaipur
Phoenix Control India Limited, New Delhi
Qualifour Auto Products (P) Ltd., Hosur
Rangsons Defence Solutions (P) Ltd., Bangalore
Russell Systems, Bangalore
Salzer Electronics Ltd. Unit-II, Coimbatore
Secure Meters Limited, Sanand, Ahmedabad
Shivalik Industries,Parwanoo
Sinicon Controls Pvt. Ltd., Palakkad
Sirio India Inductive Components Pvt. Ltd., New Delhi
SNS Industries, Bangalore
Southern Electronics (Bangalore) Pvt. Ltd., Bangalore
Spark Controls, Bangalore
The Aluminium Industries Ltd., Trivandrum
Toyota Techno Park India Pvt. Ltd., Badadi (Karnataka)
Transqull Power System Pvt. Ltd., Bangalore
Transpace Technologies Pvt. Ltd.,Bangalore
Triphase Technologies Pvt. Ltd., Parwanoo
Vidya Academy of Science & Technologies, Trivandrum
Voxelgrides Innovations Pvt. Ltd., Bangalore
1
2
3
1
1
1
2
1
3
1
2
1
7
1
1
3
1
2
1
1
1
5
1
1
1
1
Partial User References (not complete list) of our Leadfree Solder Pots
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Highly reliable typeDouble urrentC
an, soft airF
CPU/PID emperatureTontrol with C
LCD display
Adjustableair volume
Patented long life
HeatingElement
High recision ensor P S
Spare Heating Element readily availableis
Power consumptionTemperature ControlInput SupplyWeight
- Heat Gun- Shrinking Nozzle - Operating Manual
Scope of supply:
reliable & caring since 1976
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements, Temperature Sensors etc., Solder Cups While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
37
Hi-reliability Hot Air Gun with Digital Display Model I885
Features:
Digital LCD display of temperature• Cool air prolongs life of heating element•
• Closed loop of sensor, temperature controlled by micro-controller zero voltage triggering, stable - not affected by air volume• High power with rapid heating
Specifications:
: 2100 Watt: 50°C to 650°C : 230VAC, 50Hz: 1.25 kg (approx.)
Customer’s Name & CitySNo. Qty
AIL Dixon Technologies Pvt. Ltd., Chittoor
Apex Electronics, Hyderabad
Bharat Dynamics Ltd., Hyderabnad
Bharat Electronics Ltd., Ghaziabad
Blue Chip Electronics, Secunderabad
BrahMos Aerospace Pvt. Ltd., Secunderabad
Centre for Development of Advanced Computing,
Centum Electronics Ltd., Bangalore
Dynalog India Ltd., Mumbai
Essen Electronics Systems Pvt. Ltd., Visakhapatnam
Ever Eectronics Pvt. Ltd., Pune
HCL Technologies Ltd., Chennai
Hindustan Electronics Ltd., Korwa
Khurana Commercial Corporation, Delhi
1
1
1
20
3
1
1
7
2
1
3
3
15
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Customer’s Name & CitySNo. Qty
15
16
17
18
19
20
21
22
23
24
25
26
27
Koyo SMS (India) Pvt. Ltd., Chennai
Multitech Engineers, Mumbai
Osram Continental India Pvt. Ltd., Bangalore
Radmax Communication Pvt. Ltd., New Delhi
Rajshree Electro-Systems, Panvel
Ruda Micro Products, Hyderabad
Sealed Energy Systems, Amabala Cantt
Shiv Nadar University, Gautam Budh Nagar (UP)
Sytem Controls Technology Solutions Pvt. Ltd., Bangalore
Titam Company Limited, Bangalore
Vikram Sarabhai Space Centre, Trivandrum
Wingtech Mobile Communications (I) Pvt. Ltd., Chittoor
Zobele India Pvt. Ltd., Daman
5
2
1
1
5
1
1
1
2
1
3
5
1
Step I, cold air180 litre/minute
Step III, hot air400 litre/minute
Step II, hot air200 litre/minute
Partial User References (not complete list) of our Hot Air Gun
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
reliable & caring since 1976
2-Operators Solder Fumes Extraction System FumePRO201-50LCpowerful
Couple of 100's (in repeat orders) working reliably all over India for the last many years
FumePRO201Main Extraction
Control Unit
No Plumbing required ust jposition on or under the Table as needed
Burn-proof Silicon Rubber Round Hoods 105mm dia
• 1xFumePro201 Main Extraction nitU
Extraction Arms ( mm dia, meter long) 50 1 • 2x
HoodsSilicon Rubber Round (105mm dia.)• 2x
low Controllers• 2xAir F
Speed Control Regulator• 1x
pare Pre-FiltersS• 2x
Scope of Supply
• Input Power SupplyNo of Workplaces • Stationary Pressure •
• Maximum Airflow RateFiltering Efficiency (0.3um)• Noise Level• Dimension (LxWxH) (approx)•
: 230V/50Hz, W250: 2: 00 Pa30: m /h240 3
: 99.97%: <55dB*: 470x230x500mm
Specifications
Ready-to-useCompletePackage
Speed Control Regulator
On/Off switch
Speed Control
Increase speed
Decrease speed
AirflowSettingSwitches
Digital Display Indicator
Speed ControlRegulator Connector
Solder fumes extraction during hand soldering on PCB & Solder Pot tinning
System Choke Alarm:When display shows
circular movement clockwise plus OFF
and system beeps,it means Filtersany of
needs replacement.
* at distance of 1 meter & also at typical speed of turbine
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
38Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Air Flow Controller at ‘ON’ position
Air Flow Controller at ‘OFF’ position
Air Flow Controllers
Click here to view Video
Rigid Gooseneck Arms canbe positioned anywhere on
table and will stay in same
place
reliable & caring since 1976
2- perators ready-to-use Solder oFumes Extraction System Model FumePRO201-50 is fitted with LC3-stage Filters: Pre-Filter, Middle Filter and HEPA Filter. /CharcoalCombination of these Filters cleans polluted air by separating 99.9% contaminated solder fumes. This System is designed for use both in industrial and laboratory environment. All it needs is
ains nput Power Supply only.m i
1. Normally Pre-Filter only needs periodic replacement when there is less suction of fumes.
2. hese 3 Filters should never be washed nor should be cleaned with compressed air at all.T
2-Operators Solder Fumes Extraction System FumePRO201-50LCpowerful
Couple of 100's (in repeat orders) working reliably all over India for the last many years
Features
• Hassle free easy-to-start operation with all inclusive kit- supplied
• Easy-to-manoeuver Extraction Armspositioning of Fumes
• Reliable & virtually maintenance-free Brushless DC Turbine
• Has low noise (< dBA) in operation continuous running55
• Filters design removes hazardous gaseous/adhesive substances from fumes.
• Low running cost as normally low cost Pre-Filter mainlyneed replacement periodically as and when there is choking of fumes extraction.
• Readily availability of all spare parts from stock
FumePRO201-50 is a volume extraction type 2- perators ready-to-use Solder LC reliable and really effective oFume Extraction System. It is designed for continuous and reliable working on production line. Its powerful and maintenance-free brushless turbine combined with electronic speed control, provides clean working environment at low maintenance cost. The electronic Speed Controller regulates air-flow volume continuously.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
39Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Length of the Extraction Arm is easily adjustable,as this is made from press-fit type small sections which easily adjustable in length by selectionare
per length.of these sections as required
Stage III HEPA Filter
Stage I Pre-Filter
Unique Pre-CutMetal Plate
Stage IIMiddle Filter
Details of 3-Stage Filters used in this Fume Extraction System
Pre-FilterP/N:PF-PRO201
Metal Plate
Middle FilterP/N:MF-PRO201
Main Filter HEPA/CharcoalP/N:HF-PRO201
Pre-Filter (F7): The Pre-Filter filters the bigger size Stage I particles for prolonging the life of both Middle and Main Filters.
Metal Plate: Metal Plate on top to increase the life of Filters
Middle Filter: It filters coarse size fume particles Stage II to prolong life of expensive HEPA/Charcoal Filter
Main HEPA Filter (H13):/Charcoal This Filter is a Stage III combination of HEPA (filters fine size fume particles) and A C ( )ctivated harcoal absorbs harmful gas substances Filters to provide clean air finally.
reliable & caring since 1976
2-Operators Solder Fumes Extraction System FES2-75ESDLCpowerful
Couple of 100's (in repeat orders) working reliably all over India for the last many years
Main Extraction Control Unit
• 1xESD Safe Black Colour Main unit
ESD Safe Extraction Arms• 2x
( mm dia, meter long)75 1.2
Hoods• 2xBurn proof Round Silicon Rubber
Speed Control Regulator• 1x
pare Pre-FiltersS• 2x
Scope of Supply• Input Power Supply
No of Workplaces • Stationary Pressure •
• Maximum Airflow RateFiltering Efficiency (0.3um)• Noise Level• Dimension (LxWxH) (approx)•
: 230V/50Hz, W250: 2: 00 Pa30: m /h240
3
: 99.97%: <60dB*: 470x230x500mm
Specifications
Speed Control Regulator
On/Off switch
Speed Control
Increase speed
Decrease speed
AirflowSettingSwitches
Digital Display Indicator
Speed ControlRegulator Connector
Solder fumes extraction during hand soldering on PCB & Solder Pot tinning
System Choke Alarm:When display shows
circular movement clockwise plus OFF
and system beeps,it means Filtersany of
needs replacement.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
)
* at distance of 1 meter & also at typical speed of turbine
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
40
No Plumbing requiredust position onj or under the Table as needed
Burn-proofSilicon Round Hoods
Ready-to-useCompletePackage
Click here to view Video Caster wheels for easy mobility & effortless
Lockable Castor Wheel Fixed Castor Wheel
Rigid Gooseneck Arms canbe positioned anywhere on
table and will stay in same
place
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
reliable & caring since 1976
1. Normally Pre-Filter only needs periodic replacement when there is less suction of fumes.
2. hese 3 Filters should never be washed nor should be cleaned with compressed air at all.T
Couple of 100's (in repeat orders) working reliably all over India for the last many years
Features
Length of the Extraction Arm is easily adjustable,as this is made from press-fit type small sections which easily adjustable in length by selectionare
per length.of these sections as required
• Hassle free easy-to-start operation with all inclusive kit- supplied
• Easy-to-manoeuver Extraction Armspositioning of Fumes
• Reliable & virtually maintenance-free Brushless DC Turbine
• Has low noise (< dBA) in operation continuous running60
• Filters design removes hazardous gaseous/adhesive substances from fumes.
• Low running cost as normally low cost Pre-Filter mainlyneed replacement periodically as and when there is choking of fumes extraction.
• Readily availability of all spare parts from stock
FES2-75ESD reliable and really effective oLC is a volume extraction type 2- perators ready-to-use Solder Fume Extraction System. It is designed for continuous and reliable working on production line. Its powerful and maintenance-free brushless turbine combined with electronic speed control, provides clean working environment at low maintenance cost. The electronic Speed Controller regulates air-flow volume continuously.
2-Operators Solder Fumes Extraction System FES2-75ESDLCpowerful
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
41
Stage III HEPA Filter
Stage I Pre-Filter
Unique Pre-CutMetal Plate
2- perators ready-to-use Solder oFumes Extraction System Model
LC is fitted with FES2-75ESD3-stage Filters: Pre-Filter, Middle Filter and HEPA Filter. /CharcoalCombination of these Filters cleans polluted air by separating 99.9% contaminated solder fumes. This System is designed for use both in industrial and laboratory environment. All it needs is
ains nput Power Supply only.m i
Stage IIMiddle Filter
Details of 3-Stage Filters used in this Fume Extraction System
Pre-FilterP/N:PF-PRO201
Metal Plate
Middle FilterP/N:MF-PRO201
Main Filter HEPA/CharcoalP/N:HF-PRO201
Pre-Filter (F7): The Pre-Filter filters the bigger size Stage I particles for prolonging the life of both Middle and Main Filters.
Metal Plate: Metal Plate on top to increase the life of Filters
Middle Filter: It filters coarse size fume particles Stage II to prolong life of expensive HEPA/Charcoal Filter
Main HEPA Filter (H13):/Charcoal This Filter is a Stage III combination of HEPA (filters fine size fume particles) and A C ( )ctivated harcoal absorbs harmful gas substances Filters to provide clean air finally.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
HEPA (High-efficient Filter Paper: Material - Fiberglass) Filter
Middle ilter (Middle Filter Paper: Material - Fiberglass)F
Pre-Filter (Filter Material - Polypropylene)
Item
1
2
3
4
5
6
7
Refers to Q/320000BXS16-2006Efficiency and resistance tested by sodium flame
Test results
White and even
0.33
75.8
1.33
0.724
99.97 (0.3um)
196
1.55
Test
Appearance
Thickness: mm
Gram weight: g/m 2
Strength: KN/m
Efficiency:0.321/min.c m 2
Resistance:0.321/min.c m 2
Stiffness: Mn.m
Specification
White and even
0.32-0.34
/
≥1.2 (Portrait)
≥0.5 (Lateral)
≥98 (0.3um)
≤220
≥1.2
Item
1
2
3
4
5
6
7
Refers to Q/320000BXS16-2006Efficiency and resistance tested by sodium flame
Test results
White and even
0.34
69.7
1.44
0.733
66.67
36
1.75
Test
Appearance
Thickness: mm
Gram weight: g/m 2
Strength: KN/m
Efficiency:0.321/min.c m 2
Resistance:0.321/min.c m
2
Stiffness: Mn.m
Specification
White and even
0.32-0.34
/
≥1.2 (Portrait)
≥0.5 (Lateral)
≥60
30-40
≥1.2
Item
1 350 5-6 1 323 78 110
Gram persquare meter:
g/m2
Dustcapacity:
g/m2
Free statethickness:
mm
Filterspeed:
m/s
Initialresistance:
Pa
Artificialdust
efficiency:%
Specifications/Test Report of Filters used in FES2 and FumePRO201 Series-
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
reliable & caring since 1976
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
42Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
reliable & caring since 1976
Partial User References (not complete list) of our sFume Extraction System
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
43
Customer’s Name & CitySNo. Qty
ABB Ltd., Bangalore
ABB Global Industries & Services Pvt. Ltd., Bangalore
ACE Manufacturing Systems Ltd., Bangalore
ADS Sensortechnik Pvt. Ltd., Bangalore
Airtech Enterprises, New Delhi
Alstrut India Private Limited, Chennai
Amphenol Omniconnect India Pvt. Ltd., Tamilnadu
Anicad Systems, Bangalore
Apex Electronics, Hyderabad
Army Base Workshop, Agra
Arya Electronics, Trivandrum
Astra Microwave Products Ltd., Telangana
Atlantic Maritime Services Pvt. Ltd., Mumbai
Aviohelitronics Systems Pvt. Ltd., Bangalore
Balaji Sales, Indore
Bharat Electronics Ltd., Jalahalli, Bangalore
Bharat Electronics Ltd., CRL, Bangalore
Bharat Electronics Ltd., Ghaziabad
Bharat Electronics Ltd., Machilipatam
Bharat Electronics Ltd,. Taloja, Navi Mumbai
Bharat Electronics Ltd., Pune
Bharatiya Reserve Bank Note Mudran Ltd., Mysore
Bhavyabhanu Electronics (P) Ltd., Hyderabad
Bloom Energy India Pvt. Ltd., Bangalore
Blue Chip Electronics, Secunderabad
BPL Medical Technologies Ltd., Palakkad
BTL India Pvt. Ltd., Bangalore
Buffalo Grid Private Ltd., New Delhi
CET Power Solutions India Pvt. Ltd., Chennai
Centum Electronics Ltd., Bangalore
Chara Technologies, Chennai
Continental Automotive Comp. (I) Pvt. Ltd., Bangalore
Cyient DLM Private Ltd., Mandya
Danfoss Industries Pvt. Ltd., Chennai
Danlaw Electronics Assembly Ltd., Goa
Deptt. of Atomic Energy, Chennai
Dhiman Associated, Chandigarh
Divine Techno Engineers, Vadodara
EFD Induction Pvt. Ltd., Bangalore
Effee Induction Pvt. Ltd., Bangalore
Efftronics Systems Pvt. LTd., Vijayawada
Epcos India Pvt. Ltd., Nashik
9
1
5
1
2
1
3
5
5
28
1
4
1
1
1
226
3
6
2
2
18
2
4
2
37
1
1
1
3
5
1
1
7
1
2
1
1
13
2
1
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
Customer’s Name & CitySNo. Qty
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
Ericsson India Pvt. Ltd., Jaipur
EL GI Rubber Co. Ltd., Coimbatore
F.J.Tech. Pvt. Ltd., Bangalore
Flextronics Tech (I) Pvt. Ltd., Kanchipuram
Fokkar Elmo Sasmos Interconnection Sys. Ltd., Bangalore
Gallium Arsenide Enabling Technology Centre, Hyderabad
Gamesa Renewable Pvt. Ltd.-Chennai
Genus Power Infrastructures Ltd., Jaipur
Genus Power Infrastructures Ltd., Haridwar
Genus Power Infrastructures Ltd., Guwahati
Goodrich Aerospace Services Pvt. Ltd., Bangalore
Hanning Motors Pvt.Ltd., Vadodara
HCL Technologies Ltd., Chennai
Hella India Automotive Pvt. Ltd., Gurgaon
Hindustan Aeronautics Ltd., Hyderabad
Hindustan Aeronautics Ltd., Korwa
Honeywell Technology Solutions Lab. Pvt. Ltd., Bangalore
Honeywell Technology Solutions Lab. Pvt. Ltd., Madurai
Honoch Automotive Pvt. Ltd., Cochin
IJPN Technologies (I) Pvt. Ltd., Pinjore
Inductotherm (India ) Pvt. Ltd., Ahemdabad
Intellic Systems, Bengaluru
ISRO Inertial Systems Unit, Trivandrum
ISRO Satellite Centre, Bangalore
ITI Ltd., Palakkad
Jay Cee & Company, New Delhi
JNS Instruments Limited, Gurgaon
Kaynes Technology India Pvt. Ltd., Manesar
Kent RO System Ltd., Roorkee
Kent RO System Ltd., Noida
Keltron Electro Ceramics Ltd., Kuttipuram (Kerala)
KELTRON, Thiruvananthapuram
Landis Gyr Ltd., Kolkata
Larsen & Turbo Ltd., Mysore
Larsen & Turbo Ltd., Mumbai
Larsen & Turbo Ltd., Bangalore
L&T Technology Services Ltd., Bangalore
Liquid Propulsion Systems Centre, Trivandrum
Lupin Ltd., Pune
Luwa India Pvt. Ltd., Bangalore
Marathon Electric India Pvt. Ltd., Faridabad
Marquardt India Pvt. Ltd., Pune
2
1
3
37
1
3
1
32
10
3
90
1
2
1
46
6
11
2
2
10
1
1
15
3
6
1
3
1
3
4
2
43
1
7
2
3
1
6
1
1
2
1
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
reliable & caring since 1976
Partial User References (not complete list) of our sFume Extraction System
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
44Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Customer’s Name & CitySNo. Qty
Mediatek India Technologies Pvt. Ltd., Noida
Mersen India Private Limited, Bangalore
Motherson Sumi System Limited., Noida
Microchip Technology India Pvt. Ltd., Chennai
Molex India Pvt. Ltd., Bangalore
Molex India Business Services Pvt. Ltd., Bangalore
Mr. Bhatia, Mumbai
NR Oils, Halol, Gujarat
Muffalddal Tool & Hardware, Bangalore
Multilink, Mysore
Narayana Hrudayalaya Ltd., Bangalore
National Atmospheric Research Laboratory, Godanki
Nuclear Power Corporation of India Ltd.
Nucon Aerospace Pvt. Ltd., Telangana
Ordnance Cable Factory, Chandigarh
Panasonic India Private Ltd., Gurgaon
Payal Mechanical & Engineering Works, Chandigarh
PICL (India) Pvt. Ltd., Faridabad
PVR Control, Mumbai
Raja Ramanna Centre for Advanced Technology, Indore
Rajshree Electro Systems, Thane
Rama Exports, Mumbai
Rangsons Electronics Pvt. Ltd., Mysore
Raphe MPhibr Pvt. Ltd., Noida
Rcube Technologies, Noida
Refurb Tech. Chennai
Research Centre Imarat (RCI), Hyderabad
Rieter India Pvt. Ltd., Coimbatore
Rober t Boss Engg. Business Solutions P. Ltd., Bangalore
RP Network System, Bangalore
R. R. Rao Satellite Centre, Bangalore
Rudrapur Repair Centre Schneider Electric, Rudrapur
Russel TechSys (Division of Russel (I) Ltd.), Bangalore
Salzer Electronics Ltd., Coimbatore
SAMEER, Chennai
Sasmos HET Technologies Pvt. Ltd., Bangalore
Schneider Electronic India Pvt. Ltd., Bangalore
Schneider Electronic India Pvt. Ltd., Hyderabad
Semi-Conductor Laboratory, Mohali
Semikron Electronics Pvt. Ltd., Navi Mumbai
Shivalik Bimetal Controls Limited, Solan
Shree Annapurna Enterprises, Bangalore
1
14
1
1
21
2
1
1
2
4
3
1
2
1
14
1
26
5
3
1
12
1
27
1
1
1
10
1
2
1
2
2
4
1
3
10
1
4
8
2
5
1
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
Customer’s Name & CitySNo. Qty
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
Sieko-Maracia Electricals Mfg. (I) Pvt. Ltd. Chennai
Siemens ltd., Aurangabad
Sigma Microsystems Pvt. Ltd.
Sigma Freudenberg NOK Pvt. Ltd., Basma/Mohali
SLN Technologies Pvt. Ltd., Bangalore
Smash Electronics, Pune
Songrow Developers India Pvt. Ltd., Bangalore
SMC Pneumetic (India) Pvt. Ltd., Bangalore
Space Application Centre, Ahemdabad
Spectrum Infotech Private Limited, Bangalore
Stead Fast Engineers Pvt. Ltd., Faridabad
Stellar Information Technology Pvt. Ltd., Gurgaon
Success Solutions, Nashik
Suprajit Engineering Limited, Bangalore
Synergy Enterprises, Chandigarh
Syrma Technology Pvt. Ltd., Chennai
System Control Technology Solution (P) Ltd., Bangalore
SVS Industries
Tata Power Company Limited, Bangalore
TE Connectivity India Pvt. Ltd., Bangalore
Texas Instrumets (I) Pvt. Ltd., Bangalore
Terminal Ballstics Research Laboratory, Chandigarh
The Aluminium industries Ltd., Trivandrum
Titan Industries Ltd., Hosur
Titan Company Ltd., Bangalore
Titan Tyrecare Products Ltd., Coimbatore
Toyota Techno Park India Pvt. Ltd., Ramnagar
Tractors & Form Equipment Ltd., Chennao
Trasccon Interconnections Systems Pvt. Ltd., Bangalore
Urban Engineering Association Pvt. Ltd., Kolkata
Varroc Engg. Pvt. Ltd., Aurangabad
Venimadhav Moolchand Suppliers, Kanpur
V-Guard Industries Ltd., Cochin
Vikram Sarabhai Space Centre, Thiruvanthapuram
Zones Corporate Solution Pvt. Ltd.
1
1
1
2
1
1
1
1
3
2
6
1
1
1
24
14
1
1
1
2
1
1
11
3
1
1
1
2
1
1
2
6
1
63
1
reliable & caring since 1976
Warranty is 12 months from the date of invoice. It excludes any mechanically damaged part.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Best Quality QC Inspection MagnifierExtra Wide View Optical Grade
Flip Over Dust Cover
iInternal Cantilever design allows feather-touch arm
adjustment & automatically holds set position
Swivel design for easy manoeuver to any
convenient positions
Why LED types are preferred over CFL types ?
Rigid & Flexible Fixture for easy UP and DOWN movements
• Optical white glass lens does not strain user's eyes Real ESD Safe design for static-free working • Optimum Magnification 5X diopter avoids strain on eyes•
(higher magnification always make user uncomfortable) Very wide view of Lens size 180mm (7 inch) diameter• LED Light Source is longer lasting (not like CFL Tube•
type which need replacement periodically)Flip Over Cover protects Lens from dust when not in use • Operates on Mains input supply of 220~240V, 50 Hz•Nett Weight: 3750 gms (approx.) •Gross Weight: 4450 gms (approx.) •Average Power: 12 Watt •Arm Length: 85 cm •ESD Safety: 10 ~ 10 (Surface Resistivity) 6 7•
Features:
Large wide view 7 inch White Glass LensOptical grade
Non-reflecting LED light cover for inspection of shiny surfaces
ON/OFFSwitch
Heavy Duty Aluminium
Table Clamp
360°
270°
Optical White Glass Lens does not stress user's eyes for longer period working
Model IML7WLSA-ESD
normally immediate
delivery
Lifetime (hours) approx.
>30000
8000
PowerConsumed
6-8 Watt
22 Watt
LightQuality
Stable and Flicker-free
UnstableFlickering
HeatGeneration
Virtually zero
High
Toxic Mercury
Nil
Yes
ON/OFF Switching Cycles
Has No Effect
Yes, it can reduce lifespan drastically
Virtually zero
Maintenance Running Cost
Need periodic replacement,
also very fragile
Type
LED
CFL
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074545
reliable & caring since 1976
Warranty is 12 months from the date of invoice. It excludes any mechanically damaged part.shown trademarks are property of their respective owners.
• Magnification: 3 diopter + 12 diopter
Lens Material: Glass•
100mm (4 inch) Lens dia.•
Body Colour: ESD Safe Black•
Light Source: SMD LEDs•
Input Supply: 230V, 50 Hz•
• Nett Weight: 1480 gms (approx.)
Gross Weight: 1820 gms (approx.) •
Average Power: 4 Watt •
ESD Safety: 10 (Surface Resistivity) 7•
ESD Safe Portable & Light Weight LED Illuminated QC Magnifier
3 diopter 12 diopter
High Quality LED Illuminated Magnifiers for Visual QC inspection
ESD Safe design Table Clamp type LED Illuminated QC Magnifier
3X MagnificationLong life cool LED light
Non-reflective TranslucentCover on LEDs to avoid
reflection of LEDs on object/surface to be magnified
Real ESD Safe design for inspection of static sensitive PCBs
Magnification: diopter5•
Lens size: 125mm (5 inch) dia.•
Light Source: SMD LEDs56 pcs •
Lens material: GlassOptical grade •
• Input Supply: 220~240 V, 50 Hz
Average Power: 9 Watt•
Black Body Colour: •
Mounting: Table clamp•
Arm Length: 80 cm •
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074546
Model ITMESD-1706
Model ICNESDO-5
reliable & caring since 1976
100X
50X
Leadfree & SMD Soldering QC Inspection
IDM-5MPDigital Microscope
Laptop shown is not a part of supply
Digital USB Video Microscope Model IDM-5MP for QC Inspection
5 Megapixel USB type Supplied with Measurement Software Adjustable Stand• •
Rotary Switch
for controlling LED Light intensity
No need to change lenses for different magnifications
For highermagnification
For lowermagnification
The IDM-5MP Handheld Digital Microscope is a cost-effective digital microscope designed for electronicsindustries. This USB-powered microscope is capable of capturing still photos and videos with 5 megapixel resolution. The portable computer-powered design makes this unit at home anywhere a laptop can go. The Micro Capture P software allows users to analyze, annotate, manipulate, and save the transmitted images lusfrom the digital microscope. An included USB cable also allows real-time images to be displayed. The Handheld Digital Microscope includes a height-adjustable stand that adds functionality magnification zoom range to . The is suited for almost any specimen, including slides and three-dimensional objects. LED illuminators near the
and adjustable brightness rotary in themicroscope objective provide incident lighting using a switch integrated Microscope. The built-in 5MP camera, height-adjustable stand and feature-rich software make the Handheld Digital Microscope a well-equipped instrument for QC inspection in field, laboratories etc.
Image sensor
Magnification
Focus range
Frame Rate
Snap shot
Still image resolution
Video capture resolution
Flicker control
Light source
Magnification ratio
Power source
Dimensions
- Microscope
- Stand
Specifications:
: 5 Megapixels
: 0 ~ 2 x 300x
: Manual focus 0 to 50mm (1 )
: 30f/s under 600 lux brightness
S : oftware
: 2592x1944, 2048x1536,
1280x pixels1920x1080, 1024
: 1280x1920x1080, 1024
: 50Hz/60Hz
: 8 x LEDs with adjustable brightness
: 0x 300x (at 5MP res)2 ~ 200x and
: USB
: 110(L) x 33(Dia)mm,
: 165(H) x 165(L) x118(W)mm
Scope of Supply:
Description
Digital Microscope
Adjustable Stand
Software CD
Calibration Scale
Laptop**
IDM-5MP IDM-5MP-Lap**
** Laptop Computer supplied will be of any reputed make as DELL, with minimum or higher 1configuration: Dual Core Processor,250 GB HDD, GB RAM, Window 7 Home Basic
Operating System. We will not be responsible for any after-sales-services or support both for hardware and software. Customer will have to contact the respective Computer Vendor’s Service Centre directly.
UP/DOWN Movement Knob
UP/DOWN Movement Locking/unlocking Knob
Warranty is 12 months from the date of invoice. It excludes any mechanically damaged part.shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074547
reliable & caring since 1976
Line: provides measurement from one point to other point
Radius: provides measurement of radius, circumference & area of circle
Continuous Line: provides measurement of multiple lines
Diameter Circle: measures diameter, circumference and area of circle
Angle: measures angle. Clickand extend to desired angle
Component PCB Chip Diameter Distance Hole Metal
Measurement sample images taken with IDM-5MP Digital USB Video Microscope
Main menu of preview software screen
5 Megapixel USB type Supplied with Measurement Software Adjustable Stand• •
Main menu of Measurement software screen
Salient Features:• The USB connection eliminates the need for interface cards.The easy & convenient to use software for the collection and processing and measurement is included.• Manual brightness control LED • • Calibration feature for accurate measurement
5 Mega Pixels
2592x1944, 2048x1536, x1 , 1280x1920 080 1024
1280x1920x1080, 1024
Manual focus from mm to 50mm10
0x~ 00x2 2 and 300x
AVI
JPEG or BMP
8 LED s with adjustable brightness
USB2.0
5V DC from USB port
Windows XP/Vista/Win7/ Win8/Mac 10.6~10.8
MicroCapture with measurement
110mm (L) x 33mm (R)
165mm(L) x118mm(W)x12mm (H)
Image sensor
Still capture resolution
Video capture resolution
Focus Range
Magnification Ratio
Video format
Photo format
Light source
PC interface
Power source
Operation system
Bundle software
Size Microscope
Professional Stand
Specifications
Digital USB Video Microscope Model IDM-5MP for QC Inspection
Warranty is 12 months from the date of invoice. It excludes any mechanically damaged part.shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074548
• DDS01 Power & Control Unit
DDG01 Desoldering Gun•
Desoldering Bit •
• Heavy Duty Support Rack
Cleaning Sponge•
Operating Manual•
• Input SupplyHeating Power• Temperature Range •
• Vacuum Pressure Tip to Ground Potential• Tip to Ground Resistance •
in-built powerful JapaneseVacuum Pump
Lightweight Desoldering
Gun
Burn Proof Cord
Digital displayof temperature
and other menu settings
Heavy Duty Stable Stand
Cleaning Sponge
DesolderingGun Holder
Push Buttons for precise temperature
control
Desoldering Nozzles for DDS01 Desoldering Station
P/N
A1005
A1006
1.0 2.5
1.3 3.0
: 230 VAC, 50Hz: 90 Watt: 200 C ~ 480 C° °: 600mm Hg: <2mV: <2 Ohm
Specifications Scope of Supply
Low Cost Thru Hole digital Desoldering Station Model DDS01
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,
Temperature Sensors, Soldering Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074549
A1007 1.6 3.0
reliable & caring since 1976
Ceramic Filters Cleaning Pins
Assured availability, normally ex-stock, of Spare Parts of Desoldering Gun
1 Desoldering Nozzle
Heating Element2
Front Holder3
SN Description Remarks
Spring Filter4
Replace if worn out
Replace when display shows H-E/S-E
Replace if damaged
Replace if damaged
Filter Pipe
Ceramic Paper Filter
Filter pipe Assembly
5
6
7
SN Description Remarks
External Filter8
Replace if damaged
Replace look yellow in colour
Replace if damaged
Replace if suction is less
12456
8 7
3
Salient Features
Power/Control unit has in-built following features: - Password protection - In-built temperature calibration - Sleep Timer for longer life - Error message indication
Reliable heating element does not require frequent changing
Low running cost due to low priced/long life Desoldering Nozzles
Every spare part is available ex-stock to minimize down time.
Thru-hole desoldering
DesolderingNozzle
Click here to view Video
Customer’s Name & City Date of SaleSl. No. Qty
Adroit Control Engineers Pvt. Ltd., Faridabad
Air Force Station, Gautambudh Nagar (U.P)
Air Force Station, Betul (MP)
Asquare Automation Systems, Faridabad
Bharat Electronics Ltd., Pune
Blue Chip Electronics, Secunderabad
Blue Chip Electronics, Secunderabad
Champion Trading Co., Panchmahal
EFD Induction Private Limited, Bangalore
Finlabs Audio (P) Ltd., Mohali
Harness Overseas Pvt. Ltd., Mohali
Himanshu Lohani, Noida
Hi-Rel Tech Private Limited., Hosur
Honeywell Technology Solutions Lab. Pvt. Ltd., Bangalore
Ind Micro Devices, Kolkata
Ind Micro Devices, Kolkata
Landis Gyr Ltd., Kolkata
Landis Gyr Ltd., Kolkata
Larsen & Toubro Limited., Mysore
Laser Experts India LLP, Hosur
Northern Coalfields Ltd., Nigahi (MP)
Nucon Aerospace Pvt. Ltd., Hyderabad
Panasonic India Pvt. Ltd., Gurgaon
Premkumar Krishna, Chennai
Punjab Trading Co., Amritsar
Punjab Trading Co., Amritsar
Rajshree Electro-Systems, Panvel
S.P & Sons, New Delhi
Schneider Electric India Pvt. Ltd., Bangalore
Schneider Electric India Pvt. Ltd., Bangalore
Schneider Electric IT Business Pvt. Ltd., Bangalore
Shri Balaji Ji Enterprises, Ferozepur
Sumuka Solutions, Bangalore
Syrma Technology Pvt. Ltd., Bawal
Tescom, Bangalore
Trylo Industries, Surendranagar
Versabyte Data Systems Pvt. Ltd., Bangalore
Vivesvaraya Industrial and Technological Museum, Bangalore
10.05.2017
11.09.2018
31.08.2019
26.08.2020
13.03.2018
11.09.2018
30.10.2018
03.03.2020
03.10.2019
30.11.2019
26.03.2019
28.02.2019
27.07.2019
12.07.2019
03.06.2017
07.03.2018
19.12.2018
21.06.2019
05.03.2019
16.10.2018
12.04.2019
01.04.2019
17.10.2019
05.02.2019
05.11.2017
13.03.2018
09.11.2019
03.05.2017
26.12.2017
13.07.2020
13.03.2020
07.09.2018
22.04.2019
19.07.2018
05.12.2018
21.08.2020
05.10.2018
16.11.2017
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Partial User References (not complete list) of our oldering StationDDS01 Desreliable & caring since 1976
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,
Temperature Sensors, Soldering Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074550
1 00 Watt0 High Power Hot Air Rework Station Model HAS6DW
One Station suffices 0402 miniature Chips to large size (42.5x42.5 mm) SMD ICs
SpecificationsFeatures
• H 6D Main Power & Control UnitAS W
Hot Air Pencil •
Support Rack•
• Pick-up Tool
One Round Hot Air Nozzle•
Wide range of Hot Air Nozzles are available to solder and desolder Fine-Pitch QFPs, PLCCs and SMD ICs up to 42.5x42.5mm size
RoHSCompliant
L E A D
F R E E
SMD IC Pick-up
Tool to pick-up SMDs once the
solder on all the SMD IC leads is molten
• High heat power and high air flow volume provides easy and fast desoldering of large QFPs & PLCCs
• Variety of Hot Air Nozzles available for different sizes of SMD ICs like QFPs, PLCCs, SOPs.
• Push Buttons for precise temperature adjustment
• Precise temperature control, not affected by airflow
• BrushlessHas a powerful maintenance-free Motor
• Airflow is adjustable with Push Buttons
• Suitable for desoldering leadfree components
• In-built feature to store 3 ‘favourite’ Temperature & Air Flow settings in Channels “CH1, CH2 & Ch3”.
• In-built password protection and key-lock functions
• Auto-sleep feature allows system to go into stand-by mode to prolong the life of heater.
• Auto cooling also prolong the life of heater and sprotect the handle from heating
: 1 00 Watt0
: 230VAC, 50Hz
: 100°C ~500°C
: 1 ~ litre/min120
: 188x245x135mm
: 3.65 Kg
• Power
Input Supply •
Temperature Range •
Airflow Range •
• Dimension (approx.)
Weight (approx.)•
Holder forHot Air Pencil
Hot Air Pencil
Push Buttonsfor controlling
air volume
Push Buttons for temperaturecontrol
Scope of Supply
3 Channels for storing most common temperature and airflow settings
Large PLCCslike PLCC 84
LCC leadlessChip Carrier
Flat Packs Large QFPs as208 & 304 Pins
Ceramic QuadFlat Packs
Thin SOP ICs
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements, Temperature
Sensors, Soldering/Dsoldering Tips, Hot Air Nozzles, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074551
reliable & caring since 1976
Click here to view Video
NK1130 4.4mm dia
NK212712.7mm dia
NK11242.5mm dia
Suitable for SMD Chips Suitable for SOTs Suitable for SOTs
Suitable for C-QFP64 Suitable for PLCC 52 Suitable for PLCC 20
Suitable for PLCC100 Suitable for TSOP44 Suitable for TQFP44 Suitable for BQFP84
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements, Temperature
Sensors, Soldering/Dsoldering Tips, Hot Air Nozzles, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074552
1 00 Watt0 High Power Hot Air Rework Station Model HAS6DW
One Station suffices 0402 miniature Chips to large size (42.5x42.5 mm) SMD ICsreliable & caring since 1976
NK312 7BSize: 1 x mm9 19
Suitable for P-QFP128
NK3128B Size: 15x21mm
NK3129B Size: 29x29mm
NK3136B Size: 19x19mm
NK31 88BSize: x mm10 10
NK3189B Size: 33.5x33.5mm
NK3 259BSize: mm13.5x29
NK3 261BSize: x mm21 21
NK3 262BSize: x mm12 12
Suitable for QFP100
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements, Temperature
Sensors, Soldering/Dsoldering Tips, Hot Air Nozzles, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074553
reliable & caring since 1976
Customer’s Name & CitySNo. Qty
AB Industies, Bangalore
Accelor Microsystem, Panchkula
ADI EMT Pvt. Ltd., Bangalore
Adlex System Manufacturing, Solan
Anand Electronics, Chandigarh
Astra Microwave Products Ltd., Andhra Pradesh
BEL Optronic Devices Ltd., Pune
Blue Chip Electronics, Secunderabad
BPL Medical Technologies Ltd., Palakkad
BSF FTR HQ, Srinagar
Cem Solutions Pvt. Ltd., Bangalore
Cyient DLM Pvt. Ltd., Bangalore
Cyient DLM Pvt. Ltd., Mysore
Component Master, Mumbai
Continental Automotive Comps (I) Pvt. Ltd., Bangalore
Deciblepro Pvt. Ltd., New Delhi
Denso India Pvt. Ltd., Haridwar
Distronix, Kolkata
Doordarshan Kendra, Trivandrum
Dr. DeepakTalreja, Kolhapur
EFD Induction Pvt. Ltd., Bangalore
ESS ESS Enterprises, Fazilka
Flextronics Tech (I) Pvt. Ltd., Sriperumbudur
GVM Rail Pvt. Ltd., Mohali
Global Tecnologies, Bangalore
Electro Circuits Systems, Bangalore
Hella India Automotive Pvt. Ltd., Pune
Himanshu Lohani, Noida
Honeywell Technology Solutions Pvt. Ltd., Bangalore
Frog Cellset Ltd., Noida
Icon Power Solution (P) Ltd., Gurgaon
Indian Institute of Technologies, Roorkee
Ind Micro Devices, Kolkata
1
1
1
1
1
2
2
2
1
2
1
1
4
1
2
1
3
1
1
1
1
1
64
1
1
1
2
1
1
1
1
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Customer’s Name & CitySNo. Qty
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
IPC Solutions, Gurgaon
Jabil Circuits India Pvt. Ltd., Pune
Livington India Pvt. Ltd., Gurgaon
Lovely Electronics, Sahnewal, Ludhian
Multi Sphere Power Solutions Pvt. Ltd., Gurgaon
Nastroj India Pvt. Ltd., Ghaziabad
National Atmospgheric Research Lab., Gadanki
Panasonic India Pvt Ltd., Gurgaon
Perfect Team Engineering Pvt. Ltd., Navi Mumbai
Prama Hikvision India Pvt. Ltd., Palghar
Punjab Trading Co., Amritsar
Qualcomm India Pvt. Ltd., Hyderabad
Rajshree Electro-Systems, Panvel
Sasmos HET Technologies Ltd., Bangalore
Schneider Electric India Pvt. Ltd., Bangalore
Sealed Energy System, Ambala Cantt
Sangam (India) Limited., Bhilwara
Saurer Textile Solutions Pvt. Ltd., Ahmedabad
Saurer Textile Solutions Pvt. Ltd., Mohali
Saurer Textile Solutions Pvt. Ltd., Coimbatore
Sehaj Synergy Technologies Pvt. Ltd., Jaipur
SGD Pharma India Ltd., Mahabadnagar
Shri Balaji Enterprises, Ferozepur Cantt
Syrma Technology Pvt. Ltd., Chennai
Syrma Technology Pvt. Ltd., Bawal
System Controls Tech. Solutions Pvt. Ltd., Bangalore
TDK India Private Ltd., Nashik
Technomac, New Delhi
Tescom, Bangalore
Uniphos Environtronics Pvt. Ltd., Valsad
Zobele India Pvt. Ltd., Daman
Vortex Engineering Pvt. Ltd., Chennai
V5 Semiconductors, Bangalore
2
4
1
2
1
1
1
1
1
17
2
9
4
1
1
1
1
1
1
4
1
1
1
2
3
1
1
1
2
1
1
1
1
Partial User References (not complete list) of our StationHot Air s
reliable & caring since 1976
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
2-in-1 Hot Air and Soldering Rework Station Model IRS2C
in-built provisionPassword Lock Function Digital Temperature Calibration &
Power Consumption
Temperature Range
Sleep Temperature Range
Sleeping Time Range
Temperature Stability
Tip to Ground Resistance
: 90W
50°C ~ 500°C:
50°C ~ 200°C:
0 ~ 250min:
2°C(stationary air, no load): ±
2: < Ω
Specifications Soldering Section
Features
Rework Section
• High heat power and high air flow volume provides easy and fast desoldering of large QFPs & PLCCs
• Variety of Hot Air Nozzles available for different sizes of SMD ICs like QFPs, PLCCs, SOPs.
• Push Buttons for precise temperature adjustment
• Precise temperature control, not affected by airflow
• Has a powerful maintenance-free Motor Brushless
• Airflow is adjustable with Push Buttons
• In-built password protection and key-lock functions
• Auto-sleep feature allows system to go into stand- by mode to prolong the life of heater.
• Auto cooling also prolong the life of heater and protect the handle from heating
Soldering Section• Push Buttons for precise temperature adjustment • Precise temperature control • Suitable for soldering leadfree components& SMD • In-built password protection and key-lock functions• Auto-sleep feature allows system to go into stand-by
mode to prolong the life of heater and Soldering Tips• in-built digital temperature calibration facility to meet
ISO requirements• Various error message indication enables the user
to rectify the fault immediately. • Lightweight and comfortable for fatigue-free working
Power Consumption
Temperature Range
Air Volume
Temperature Stability
: 1000W
: 100 500°C ~ °C
: ~ itre1 120 L /min
: ±2°C
Specifications Rework Section
Wide range of Hot Air Nozzles are available to solder and desolder Fine-Pitch QFPs,
PLCCs and SMD ICs up to 42.5x42.5mm size
Fine pitch SMD Solderingand Thru-hole
Large PLCCslike PLCC 84
LCC leadlessChip Carrier
Flat Packs
Large QFPs as208 & 304 Pins
Ceramic QuadFlat Packs
Thin SOP ICs
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,Temperature Sensors, Soldering/Desoldering/Hot Air Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
SMD IC Pick-up Tool
to pick-up SMDs once the solder on all
the SMD IC leads is molten
RoHSCompliant
L E A D
F R E E
54Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Scope of Supply:• Main Power & Control Unit Hot Air Pencil with StandHAP2C & Hot Air Nozzle• Soldering Pencil SP2CESD fitted with Soldering Tip•
with for Soldering Pencil Stand Cleaning Sponge•SMD IC Pick-up Tool •
SMD Reworking
Hot Air Nozzles for IRS2C Hot Air Rework Stationand Soldering
reliable & caring since 1976
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,
Temperature Sensors, Soldering/Desoldering/Hot Air Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
in-built provisionPassword Lock Function Digital Temperature Calibration &
2-in-1 Hot Air and Soldering Rework Station Model IRS2C
55Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Suitable for C-QFP64 Suitable for PLCC 52 Suitable for PLCC 20Suitable for P-QFP128
NK3128B Size: 15x21mm
NK3129B Size: 29x29mm
NK3136B Size: 19x19mm
NK31 88BSize: x mm10 10
Suitable for PLCC100 Suitable for TSOP44 Suitable for TQFP44 Suitable for BQFP84
NK3189B Size: 33.5x33.5mm
NK3 259BSize: mm13.5x29
NK3 261BSize: x mm21 21
NK3 262BSize: x mm12 12
NK1130 4.4mm dia
NK212712.7mm dia
NK11242.5mm dia
Suitable for SMD Chips Suitable for SOTs Suitable for SOTs
NK312 7BSize: 1 x mm9 19
Suitable for QFP100
Wide range of Soldering Tips are available for different soldering applications
21
4
5
3
1 Barrel & Nut Assembly
Soldering Tip2
Heater Enclosure (Nipple)3
SN Description Remarks
Temperature Sensor4
Whenever required
Replace if worn out
Whenever required
Replace when display shows S-E
5 Heating Element Replace when display shows H-E
Assured availability, normally ex-stock, of spare parts for Soldering Pencil
Part Number
200- D2.42.4
Width A (mm)Description Dimensional DiagramActual Picture
Chisel Tip for leadfree soldering 0.5
312
Chisel Tip for leadfree soldering 200- D3.2L3.2
0.53
17
Chisel Tip for leadfree soldering 200- D5L5.0
Sloped Tip for leadfree soldering
0.5 3 16
200-2CØ2
Sloped Tip for Solar Panels 12
200-3CØ3
Sloped Tip for Solar Panels
200-4CØ412
Sloped Tip forSolar Panels 200-5CØ5
Round Tip for leadfree soldering 200-BR0.5
0.5 312
R0.5
Soldering Tip for SMD Soldering
200-3CM3.0
12
12
12
reliable & caring since 1976
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.Warranty is 12 months from the date of invoice. It excludes all consumable parts as Heating Elements,
Temperature Sensors, Soldering/Desoldering/Hot Air Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
in-built provisionPassword Lock Function Digital Temperature Calibration &
2-in-1 Hot Air and Soldering Rework Station Model IRS2C
56Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Additional Features in latest ST5S
Technical Speci ications f
Measurement Ranges
Other Specifications
Swiss made Gold Plated Tips
Shielded 4-Wire Handles
C,L,R,ESR,Diode Modes
Battery Indicator
4-Directional Navigation Control
Multi-Parameter Secondary Display
Automatic Test Mode
LED Display
Resistance RCapacitance CInductance LQuality factor QDissipation factor D
: 0.05 to 9.9 MΩ Ω: 0.5 pF to 9999 uF : 0.5 uH to 999 mH: 0.001 to 1000: 0.001 to 1000
SizeWeightBattery TypeBattery Life (continuous)
AC Test Mode frequencyTest Signal LevelTest frequency accuracySource Impedance
: 1kHz, 10kHz, 120Hz, 100Hz: 0.5/1.0 +/- 5% V Sine waverms
: 50PPM (0.005%): 100Ω +/- 1%
: 15.0 x 1.8 x 1.5 cm approx.: 29 grams approx.: 3.7V LiPO rechargeable 180mAH: 20 hours, 3 hours changing cycle
• Smart Tweezers™ LCR meter allows you to test various component types, including secondary components of Dissipation Factor (D), Quality Factor (Q). This handheld model also includes other functions that result in a more detailed component analysis.
.
• The in-built ESR mode (Equivalent Series Resistance) helps you better understand the inherent resistance - behavior typically found in capacitors across selected frequencies.
.
• in its DIODE mode Smart Tweezers ™ ,tests diode polarity and indicates if it is short.
.
• This Smart Tweezers™ has a continuity detector ariable beeper sounds for for vresistance reading below set thresholds. Additionally, this function helps to locate shorted conductors (e.g. on a PCB)
.
• In manual mode, the Smart Tweezers™ measures a specific circuit parameter like L, C, R, Z or ESR. Manual modes also improves overall component type identification for in-circuit tests.
.
• Variable test signal output from 0.5 to 1.0 Vrms, allows to improve test precision ingin different situation e.g. for in-circuit measurement and loose leaded ceramic capacitors.
.
• Visible and audible tolerance mode allows to perform component sorting.
.
• Math null function allows to store a pre-measured of f set and improve smeasurement precision.
Advance Devices, Inc. Canada is the ORIGINAL ONLY and Single
manufacturer of Smart Tweezers . Inde Enterprises is in the world
Indian and . their distributor after-sales-service partner We keep
parts to provide our proven after-sales-service.all spare
Latest Handy LCR Chips Measuring Smart Tweezer Model ST-5S version 1.5
Siborg is also a re-seller like Inde, they are not manufacturer of Smart Tweezers
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Warranty is 12 months from the date of invoice. It excludes any mechanically damaged part.batteries and
reliable & caring since 1976
To avoid damage to SMART TWEEZER and to avoid electrical shock
- Disconnect circuit power supply & discharge all high-voltage capacitors before testing R, L & C
- Don’t attempt to measure any in-circuit components when your circuit is alive or active
- Don’t apply external voltage of more than 1.6V
- To charge the battery use only DC5V charger
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074557
Smart Tweezers greatly simplifiesTM
testing and troubleshooting process.
Resistance, capacitance and inductance can be measured with automatic selection of the testparameters and range.
• Built-in high-precision LCR probeConvenient one-hand operation• Ideal for Surface Mount Devices• Automated component identiication•Automated test range selection• Manual C, R, L, Z and ESR Modes• Adjustable test signal levels• Swiss-made precise test leads • Diode Polarity/Short Testing• Secondary D, Q and ESR parameters• Extensive in-circuit test capabilities• Built-in Li-PO battery•
Smart Tweezers™ is a handheld LCR meter of a new concept. It provides perfect solution r test and identifto y SMD Chip parts
helps in as well troubleshooting of complex electronic systems. Its unique mechanical and electronic design combines a pair of
ionprecis gold-plated tweezers and a digital LCR meter in It scompact, lightweight, battery powered instrument. measure
, also resistance, capacitance, inductance with high accuracyindentifies s automaticallycomponent identification .
Automated MeasurementsThe Smart Tweezers™ measures quickly and accurately using the automatic component identification feature, thus eliminating unnecessary trial and error time. Smart Tweezers™ automatically specifies L, C, or R with parallel and series mode and selects a proper measurement range and test frequency for high accuracy measurements. The unit displays component type and more detailed component analysis such as Z and ESR.
Lightweight and ErgonomicThe integrated measurement allow the operator to use one Tipshand and focus attention on the tested component and on the job at hand. Sorting, testing and troubleshooting become more efficient and cost effective. 4-wire shielded Smart Tweezers™ assure low capacitance measurement and resistance offsets
Testing Surface Mount DevicesSMDs ( )Surface mount devices are usually tiny and without wire leads, making them more difficult to test and identify than conventional leaded components. Smart Tweezers™ gives users an easy way to sort and evaluate loose components and to perform on-board measurements and debugging.
Precise ips reliably contact even the smallest SMD components Tand take measurements from already soldered devices. The
robe can also be used to test conventional components with Pwire leads too short to insert into the test terminals.
An Efficient and Convenient Way to Test SMD Chip Components
High Precision Test Lead TipsGold PlatedSpare High Precision Straight Tips
Siborg is also a re-seller like Inde, they are not manufacturer of Smart Tweezers
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Warranty is 12 months from the date of invoice. It excludes any mechanically damaged part.batteries and
reliable & caring since 1976
Latest Handy LCR Chips Measuring Smart Tweezer Model ST-5S version 1.5
Optional High Precision Bent
Tips
swiss made
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074558
Siborg is also a re-seller like Inde, they are not manufacturer of Smart Tweezers
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Warranty is 12 months from the date of invoice. It excludes any mechanically damaged part.batteries and
reliable & caring since 1976
Accuracy Specifications
Accuracy for the ranges of 10 pF~1000 pF is specified after subtract of stray capacitances for test leads.
10 kHz
NA
NA
0.5% + 5
0.2% + 3
0.5% + 3
0.5% + 3
0.5% + 3
0.8% + 20
1.0% + 50
1 kHz
NA
0.5% + 5
0.2% + 3
0.2% + 3
0.2% + 3
0.2% + 3
0.5% + 5
0.5% + 10
NA
120 Hz
0.5% + 5
0.3% + 3
0.2% + 3
0.2% + 3
0.2% + 3
0.5% + 5
NA
NA
NA
100 Hz
0.5% + 5
NA
NA
NA
NA
NA
NA
NA
NA
Resolution
0.1 µF
0.01 µF
0.001 µF
0.1 nF
0.01 nF
0.001 nF
0.1 pF
0.01 pF
0.001 pF
Range
1000 µF
100 µF
10 µF
1 µF
100 nF
10 nF
1000 pF
100 pF
10 pF
Capacitance
Range
10 µH
100 µH
1 mH
10 mH
100 mH
1 H
Resolution
0.001 µH
0.01µH
0.1 µH
0.001 mH
0.01 mH
0.1 mH
100 Hz
NA
NA
0.7% + 10
0.5% + 3
0.5% + 3
0.2% + 3
1 kHz
NA
1.0% + 5
0.5% + 3
0.2% + 3
0.2% + 3
NA
10 kHz
1.0% + 5
0.7% + 3
0.5% + 3
0.5% + 3
NA
NA NA
Inductance
10kHz
0.7% + 50
0.7% + 8
0.2% + 3
0.2% + 3
0.2% + 3
0.5% + 5
0.5% + 5
5.0% + 8
1 kHz
0.7% + 50
0.7% + 8
0.2% + 3
0.2% + 3
0.2% + 3
0.5% + 5
0.5% + 5
2.0% + 8
100 Hz
0.7% + 50
0.7% + 8
0.2% + 3
0.2% + 3
0.2% + 3
0.5% + 5
0.5% + 5
2.0% + 8
Resolution
0.001 Ω
0.01 Ω
0.01 Ω
0.1 Ω
0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ
Accuracy for the ranges 1 R ~ 100 R is specified after subtract of the offset resistance.
Resistance (Impedance)
Range
1 Ω
10 Ω
100 Ω
1000 Ω
10 kΩ
100 kΩ
1000 kΩ
10 MΩ
Latest Handy LCR Chips Measuring Smart Tweezer Model ST-5S version 1.5
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074559
Siborg is also a re-seller like Inde, they are not manufacturer of Smart Tweezersreliable & caring since 1976
Latest Handy LCR Chips Measuring Smart Tweezer Model ST-5S version 1.5
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
Warranty is 12 months from the date of invoice. It excludes any mechanically damaged part.batteries and
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 981560074560
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes all consumable parts as etcsuctions cups and all mechanically damaged parts as Needles.
IVS-381 Electrically-operated very powerful Vacuum Pick-up Pen is designed for pick and place large SMD Acomponents as LED chips, large chip capacitors, large chip resistors and large size SMD ICs. Additionally this ensures no damage to all such expensive SMD components during picking and placing
in-builtVacuum Pump
Knob forAdjusting
Vacuum suction
Variety of SuctionNozzles and Pads
• ESD safe design avoids damage to static sensitive expensive componentsErgonomically designed and light weight Pick-up Pen for operator’s comfortable working• Adjustable and powerful vacuum suction force up to 120g•
Suction ozzles and ads Different N Rubber P for different sizes of SMD components•
Features
Specifications Scope of Supply
• Main UnitStraight Suction Nozzle 1.45 mm outer dia( )• Bent Suction Nozzle 1.45 mm outer dia( )• Operating Manual•
PowerPump typeMax SuctionDimensions
: 7 Watt: Diaphragm: mmHg ( Pa)600 0.06 M: 130x160x110mm (approx.)
Electrically-operated SMD ICs & Chips Vacuum Pick-up Pen Model IVS-381A
Easy and safe pick and plac SMD LEDsing of
Easy and safe pick and place large size SMD components as QFPs, PLCCs, TSOPs, SOICs
high vacuum pick-up is effective from as small as 0204 Chip to large LED Chips
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
61
reliable & caring since 1976
Conductive Silicon Rubber Suction Pad
Customer’s Name & CitySNo. Qty
Anuvidyut Private Limited, Roorkee
Balaji Sales, Indore
Bionic Hope Private Limited, Patna
Blue Chip Electronics, Secunderabad
Cooper Connections Pvt. Ltd., New Delhi
Dixon Technologies India Ltd., Chittoor
DRI India Relays Pvt. Ltd., Bangalore
EME Automation, Goa
Hindustan Platinum Pvt. Ltd., Navi Mumbai
Hi-Rel Tech Private Ltd., Hosur
Hitach Hi-Rel Power Electronics Pvt. Ltd., Sanand
Indian Institute of Technolgy, Roorkee
1
1
1
1
1
2
2
1
1
1
4
2
1
2
3
4
5
6
7
8
9
10
11
12
Partial User References (not complete list) of our Vacuum Pick-ip Pen
widely for used LED Chips assembly
Customer’s Name & CitySNo. Qty
Integrated Electronics Technologies Pvt. Ltd., Thane
Jabil Circuits India Pvt. Ltd., Pune
Micro Separations, Ghaziabad
O/E/N India Limited, Ernakulam
Prima Automation (India) Pvt. Ltd.,Gandhinagar
Predictive & Proactive Technologies Pvt.Ltd., Vadaodara
SMC Pneumatic (India) Pvt.Ltd., Noida
TDK India Pvt. Ltd., Bawal
The Tata Power Co Ltd., Bangalore
Vikram Sarabhai Space Centre, Thiruvananthapuram
Vortex Engineering Pvt. Ltd., Chennai
2
5
1
1
2
1
1
1
8
6
1
13
14
15
16
17
18
19
20
21
22
23
Website: www.indeonline.in Email: @indeonline.in & [email protected]: 9316134502 & 9815600745
Part Number Size (Feet)
ESDTM-0204
ESDTM-0205
ESDTM-0206
ESDTM-0207
2 x 4
2 x 5
2 x 6
2 x 7
Part Number Size (Feet)
ESDTM-0304
ESDTM-0305
ESDTM-0306
ESDTM-0307
3 x 4
3 x 5
3 x 6
3 x 7
Part Number Size (Feet)
ESDTM-02505
ESDTM-02506
ESDTM-02507
ESDTM-02508
2.5 x 5
2.5 x 6
2.5 x 7
2.5 x 8
Part Number Size (Feet)
ESDTM-0405
ESDTM-0406
ESDTM-0407
ESDTM-0408
4 x 5
4 x 6
4 x 7
4 x 8
reliable & caring since 1976
Our Hi-end Top most quality long lasting ESD Safe Rubber Mats
Our ESD Safe Rubber Mats do not break
when twisted or bent even if youbend forcefully.
Ready-to-use Rubber s as per your sizeESD Safe Table MatHi-Quality
• Resistivity of surface layerResistivity of bottom layer •Wear rate •Electrostatic dissipation time •Impact Brittleness •Temperature (no incision)
: 10 Ω ~ 10 Ω6 9
: 10 Ω ~ 10 Ω3 5
: 0.02g/cm2
: < 0.1s: -250°C without destruction
Specifications:
• Colour /FinishThickness •Tensile strength •Elongation at break •Tear Strength •Temperature resistan t•
: Blue/Green/Grey, Matte: 2 mm : 4 ~ 6Mpa: 250%: 20.6KN/m (Right Angle Type): 120°C
Low cost & Low quality ESD Rubber Mats others supply
Low quality type ESD Safe
Rubber Mats normally breaks when twisted or
bent accidentally.
Static DissipativeLayer: Green0.5mm thick
Creates ESD Safe environment against damaging static charges
10mm Snap Button to connect Wrist Strap and Grounding Cord
Top MostQuality
No Warranty is applicable for these consumable items.
We specialize in supplying ready-to-use ESD Safe Table Mats as per sizes of customers
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
You are welcome to contact us for custom sizes as per your required sizes.
Following sizes are what we are supplying commonly to many customers at present
ConductiveLayer: Black1.5mm thick
Matte Finish(non-shiny)
Static DissipativeLayer: Light Blue0.5mm thick
Static DissipativeLayer: Grey0.5mm thick
2-Layer ESD Rubber Mats have a top layer of static dissipative rubber layer laminated to a black conductive rubber bottom layer. Surface resistivity of the top layer is 10 ~10 ohm and the bottom layer is 10 ~10 ohm. 6 9 3 5
Our 2-layer ESD Rubber Mats are resistant to commonly used solvents in electronics assembly/repair work.
These Table Mats are strongly recommended as first basic requirement when - ESD Safe Wsetting up orkstation electronic assembly repair field servicfor / / ing. ESD Safe working environment is necessary to protect expensive
electronic devicesmicro- .
Website: www.indeonline.in Email: @indeonline.in & [email protected] infoPhones: 9316134502 & 9815600745162
reliable & caring since 1976
ESD Grounding Cords, Wrist Strap, Warning Tape, ESD Safe Bags
Common Grounding Point P/N: ESD-CGP-4H Grounding Cord P/N: IGC-1601
• Designed to ground ESD Table Mat• Provides two grounding points, one for Wrist Strap other for and connection to ground
One end has Snap • Button and 2 Banana Jacks other end has , Grounding Thimble
Length: 2 meters (approx.)•
• Designed for use at workstations Provides grounding points •
for two Wrist Straps as well for Table Mat and Runners One end has 2 Snap Buttons •
and 2 Banana Jacks & other end has Ring Terminal• Length: 6 feet (approx.)
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
There is no warranty for these consumable type items.
63Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
• Elastic Polyester fabric with conductive plated threads• In-built 1 MOhm resistor
Length of Cord: • 6 feetSnap Button at one end •
and Banana Plug with Alligator clip at other end
P/N: IWSESD-1602ESD Safe Wrist StrapGrounding Cord P/N: IGC-1619
• P rotect static sensitive devises from static charge• Both ends has snap button
8 feets Length: (approx.)• • Cord diameter 2.4mm : (approx.)
Copper wire with PU layer• in-built 1MOhm resistance•
ESD Warning Tape P/N: IWTESD-1614
High quality ESD Warning Tape is self-adhesive, highly visibility floor marking tape for marking the boundaries of ESD protected areas. It is highly visible and adheres very well to synthetic floors such as PVC floor tiles, the tape will also adhere to concrete floors and can be expected to remain intact for
several months depending on traffic.
Excellent ESD Performance • High temperature resistance• Antistatic warning signs• Size: 48mm width and 27.5 meters length• Black legend colour with yellow background•
AttentionObserve precautionsfor handlingElectrostatic SensitiveDevices
ESD Safe Grid BagsShielding ESD Safe Conductive Bags (Pink Colour)
P/N: I BESD-C 0051 P/N: I BESD-S 0054
• Material: Polyester/polyethylene +static dissipative coating
Surface resistance of 10 -10 Ω6 10• (approx.)Size: 250 x 305mm •
Colour: Silver Grey• Thickness: 2-4 mil• Static Decay: • <0.03 s
• Material: Low density polyethylene
Surface resistance • of 10 -10 Ω8 10
Size: 250 x mm 297• Colour: Pink • Static Decay: <2 s•
Protects stored PCBs and components from the static charges inside as well from outside
static dissipative coating through the on erthe out surface.
Protects stored PCBs and components from the static charges inside as well from outside through
static dissipative coating the eron the out surface.
Durable Hi-Quality ESD Safe PCB Rack
P/N: IPMR-805
• Surface Resistance: 10 ~104 6Ω Heat Resistance: 80°C• Approximate Size: •
355x320x563 mm PCB Capacity: 50 pieces• PCB Size: 355 x 50~250 mm • Guide Slot: 3.5Dx5Wx10P mm• Top & Bottom Plates: Plastic• Easy-to-adjust Lever Mechanism•
Specifications
Hi-quality heavy duty Screws for channels
High strength thick wall
metallic channel
Hi-Quality, easy-to- adjust
Lever m echanism
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
reliable & caring since 1976
There in no warranty for these consumable type items.
• Surface resistance: 10 ~10 Ω4 6
ize: 56x32x21 mm (approx.)External s• ize: x x mm (approx.)Internal s 40 26 16• Spring loaded top cover • Useful to store miniature SMD Chip Components•
ESD Chip Component Box P/N: ESD-BOX-M
• Economical carrier for handling soldered or bare PCBs of any size
Ω Surface resistance: 10 ~10 4 6•Size: 435x160x30 mm (approx.)•25 slots to carry 25 PCBs •
ESD Safe PCB Tray P/N: IPCBT-3134
Hi-Quality ESD Safe Component Boxes, PCB Trays & Racks
• Surface resistance: 10 ~10 Ω4 6
9 sections each of 100x100x10 mm size• Inter size: 300x300x10 mm (approx.) nal• Exter size: 315x315x15 mm (approx.)nal•
ESD Safe Conductive Tray P/N: ESD- -TR 9
64Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
ESD Safe Conductive Tray
• Surface resistance: 10 ~ 10 Ω4 6
External : 320X230X42mm (approx.) size• Internal : 300X215X37mm (approx.) size•Heat resistant upto 180°C •
heat resistant upto 180 C°
Many customers use in oven for pre-baking of electronics components
P/N: IESDT-3203
ESD Safe Component Box
• Surface resistance: 10 ~10 4 6 ΩExternal size: 138 x 96 x 48mm (approx.)•Internal size 120 x 82 x 36mm : (approx.)•
• Easy-to-use slide-in drawar types Very useful to store SMD Chip Components •Horizontally and vertically stackable design •
P/N: IESDCB-3105
P/N: ESDT-3204I
• Surface resistance: 10 ~10 4 6 ΩExternal size: 435x335x67mm (approx.)•Internal s 420x320x60mm ize: (approx.)•Very useful to store and clean static •
sensitive devices
ESD Safe Conductive Tray
ESD Safe Curved Tweezer P/N: ESD-15
116
10.333
for SMD IC removal with hot air application and foreasy handling in confined areas
• With ESD Safe coatingSuper fine curved tip type• Material: Stainless Steel • Non-Magnetic• Length: 116mm (approx.)•
ESD Safe Soft Tip Straight Tweezer P/N: GCP-147
26
44
Non-Magnetic •• Resistance: < 10 Ohm 8
Tip Material : PPS, ESD Safe•• Length: 130 mm (approx.)
for handling fragile SMDs. Does not scratch surface of fragile parts and sensitive SMD ICs
reliable & caring since 1976
Hi Quality- ESD Safe Tweezers for SMD handling
ESD Safe Soft Tip Reverse Action Straight Tweezer P/N: ESD-259AX
• Anti MagneticESD Safe Precision Tweezers• Non-Corrosive & Non-Glare type• Stainless Steel• Length: 140 mm•
ESD Safe Straight Tweezer P/N: ESD-14
31110
9.7
for handling small parts and SMD components and fine wires
• With ESD Safe coatingSuper fine straight tip type• Material: Stainless Steel • Non-Magnetic• Length: 110mm (approx.)•
ESD Safe Longer Length Straight Tweezer P/N: ESD-11
for handling small parts and SMD components and fine wires
53140
7.7
• With ESD Safe coatingSuper fine straight tip type• Material: Stainless Steel • Non-Magnetic• Length: 140mm (approx.)•
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
There is no warranty for these consumable type items.
65Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
Heavy Duty ESD Safe Cleaning Brush P/N: ICBESD-1607
Removes dirt on PCBs & on other static sensitive components and also discharge static chargeBrushes minimize static charge generation and dissipate static charge.• Conductive plastic brush
Surface resistivity: 10 ~10 Ω6 9• Bristle matrix: 3x12• Bristle length: 19 mm (approx.)• Length: 170mm (approx.)•
reliable & caring since 1976
ESD Safe Cleaning Brushes, Flux Bottles and PCB Holder
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
There is no warranty for these consumable type items.
66Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
ESD Safe Dispensing Bottle P/N: ESD-DB-180
• Made up of Polyethylene Stainless steel one touch •
pump top Capacity: 180ml • Surface resistivity: Ω• 10 ~ 10
9 10
ESD Safe Flux Bottle P/N: EFABN-60
• Made up of Polyurethylene Stainless Steel Hypodermic •
Needle Capacity: 80ml • Surface resistivity: 10 ~ 10
9 10• Ω
vertical type with BristlesLong
Conductive plastic brush • Surface resistivity: 10 ~10 Ω6 9• Bristle matrix: 1x3• Bristle length: 42mm (approx.)• Length: 125mm (approx.)•
Conductive plastic brush • Surface resistivity: 10 ~10 Ω6 9• Bristle matrix: 2x6• Bristle length: 18mm (approx.)• Length: 150mm (approx.)•
ESD Safe Cleaning Brush P/N: ICBESD-1608 ESD Safe Cleaning Brush P/N: ICBESD-1616
• Unscrew Length Adjusting Knob for clamping as per PCB requirement and screw the knobs. Put the PCB into the clamping teeth• Unscrew Angle Adjusting Knob to get the •
desired angle and then screw the knobs.
360 degree adjustable
• The PCB can be turned and rotated thru-out 360° to set the PCB to comfortable positioning to have every access like front, back viewing) of the PCB. ( Holds circuit boards up to 200 x 130mm size.• Spring Clamp for holding PCBs• The metal stand has 4 rubber feet to ensure stability•
Features: Operation:
PCB Clamps
Angle adjusting knob
Length Adjusting
Knob
This adjustable Circuit Board Holder is very useful for clamping PCB for comfortable working of operator during soldering, desoldering and reworking.
Adjustable PCB Holder P/N: IPCBH200ESD
ESD Safe Gloves with PU Coated Finger Tips P/N: IPUG-Series
• Surface resistivity: 10 ~ 106 9
ΩMade from soft nylon for operator’s comfort• PU coated Finger ips T• Elastic, absorbent and non-slip type• Integrated with arbon iberC F•
izes: Medium (M) & Large (L)S• Ordering codes:•
- IPUGMESD-1611 for Medium size - IPUGLESD-1612 for Large size
Static Dissipative
reliable & caring since 1976
• 10 ~ 10 ΩSurface resistivity: 8 9
ESD Safe, powder free •Made from 100% latex material •Meets MIL-STD-105E for holes, tear, stains •
and electrostatic propertiesSpecially in rolled form so that these can easily •
put on the fingersSoft, comfortable and good wear resistance •
ESD Safe Pink Finger Cots (1440 Pcs/Bag) P/N: ESD -I PFC 086
These Finger Cots avoid skin allergy, prevent perspiration pollutants of the components to the fingertips. These are widely used in electronic assembly, photonics, medical and pharmaceutical manufacturing.
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
There is no warranty for these consumable type items.
67Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
ESD Safe Aprons, Gloves, Slippers and Finger Cots
• Material: 98% polyester, 2% conductive yarn and 5mm grid Surface •
Ωresistance: 10 ~10 6 9
Colour: Blue •Size: Standard •
• Reusable and washable
ESD Safe Fabric Shoe Covers (Reusable type)
P/N: IESDFSC-26108
ESD Safe Slippers P/N: ISESD-1606
• ESD Safe and skidproof
Tenacious sole and upper •
Comfortable & convenient •
Washable & wear-resistant •
Resistivity: 10 ~10 6 9
• Ω
Colour: Blue •
Size: 42 and 44•
ESD Safe Apron in Blue Colours P/N: IA-Series
ESD S fe Aprons are made of lint-free polyester filament, which provides good astatic dissipation and superior air permeability and particle filtration. This helps the operators to be comfortable. These Aprons have a conductive yarn that provides low surface resistivity of between 10 Ω ~ 10 Ω and quick static 6 7
dissipation for effective control of ESD.
5mm Strip Fabric
• Durable anti static propertyHigh color fastness and tear strength.• Breathable to wear.• Available colour: Blue and White• Available sizes: Medium (M) & Large (L)• Ordering codes:•
- IAMESD-1604 for Medium size - IALESD-1605 for Large size
reliable & caring since 1976
• Use anywhere to check personnel ESD grounding quickly Checks contact resistance between Wrist Strap and skin•
Simply touch circular surface on Tester with your hand and connect ground wire. In case of a safe ground, LED will be 'Green'. Opposite Table summarizes test indications.
Grounding Wire of Wrist Strap Tester
Grounding Wire of Wrist Strap
Wrist Strap
Wrist Strap Tester
LED Indication Resistance Buzzer
Power Low ( )Red
Good (Green)
High (Red)
<750KΩ
750K ~ 10MΩ Ω
>10MΩ
OFF
ON
OFF
Operation
Higher Quality low cost Wrist Strap Tester & Continuous Monitor
Wrist straps are the primary method to minimize the static charge on the human body. They must be able to drain this charge as rapidly as it is generated. For this reason it is important to test wrist straps on a regular basis to ensure they are working properly. To ensure theproper working of Wrist Straps, this model 498 is used to check thegrounding quickly.
Scope of Supply:
• R ance Test Resist angePower upplyS• Changeover ointP• Dimensions (approx.)• (approx.)Weight• • Wrist Strap Tester Model 498
Power Supply: 9V Battery • • Grounding Wire
Specifications:
: 750K ~ 10MΩ Ω: 9-volt battery
10%: ±117mm 0mm 40mm: (L) x 8 (W) x (H)
: rams110 g
Continuous Wrist Strap Monitor
Model Continuous Wrist Strap Monitor continuously s the 495 monitorESD integrity of wrist strap and its ground. It provides instant notification of the wrist strap or ground failure. When the production process is of very high value, reliable ESD safety and ground is must for continuous monitoring at operator level.
Input Voltage•
Working Current •
Weight (approx.)•
Dimensions (approx.)•LED
OK ( )Green
Fail ( )Red
Fail ( )Red
Value
825K ~ 9MΩ Ω
11M and aboveΩ
765K and belowΩ
Specifications:
Sound and light alarm• Portable and compact, easy to use•Real time monitoring of Wrist Straps• Real time monotoring of groudning•
: 12 VDC6 ~
: <50mA (12VDC)
: 50 g rams
: 75Lx46Wx27H mm
Scope of Supply:
Wrist Strap Monitor•Grounding Cord •Power Supply Adaptor (DC 6-12V) •
Ground
Wrist Strap
PowerSwitch
Power SupplyFeatures:
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes any mechanically damaged and electrically misused part.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
P/N: 495
P/N: ISM-498
68Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
ESD Static Charge Meter & Digital Surface Resistivity Tester
Interpretation of Digital Display
bL --- It needs Battery replacement. It means Calibration Error, needs re-calibration.CE ---
Lr --- Test resistance is less than 300Ω (3*10 Ω).2
Test resistance is more than 3TΩ (3*10 Ω). Hr --- 12
X.X E XX display means X.X raise to the power 10 (10 )xx)
Example: If display shows 9.5E10, it means 9.5*10 Ω = 95GΩ 10
Test Results reading
Test rangePowerResolution ratioPrecisionConditionSizeWeight
Specifications:
: 10 ~10 Ω 3 12
: 9V battery: 0.1 order of magnitude: ±10% : 0°C ~ 49°C, RH 0%–80% : 130(L)×72(W)×35(H)mm (approx.): about 170 g (battery included)
Surface Impedance Tester is used for measuring the surface coefficient and grounding resistance of objects, as well as the antistatic and insulating material.
Electrods on the back side
Digital displayreadout
P/N: 193
Checks static charge on human beings and also discharge the same
This Static Charge Checking Instrument checks and discharges electrostatic charge on human body. It displays electrostatic charge on human body digitally; and also has provision to discharge the same before personnel enter ESD protected area. It is also effective in detecting the electrostatic potential difference between two persons. This Instrument also checks the effectiveness of grounding straps, coil cords, ground pin, antistatic floors, antistatic clothes etc.
: 0 ~ 19990 Volts : ±8%, ±1digit (0±10000V): Digital display: 9VDC Battery or AC Adaptor: 160 x 100 x 40mm (approx.): 230 grams (approx.)
• Easy-to-use reliable and portable design Has provision for wall mounting outside •
the ESD protected area It can check voltages of +ve and -ve polarites•
Features:
Test rangeAccuracyOutputPower SupplyDimensionsWeight
Specifications:
How to read the Display values:
The voltage range of the meter is from 0V to19990V
“0” on the display means “1” digit, so the final Voltage value is value displayed on LCD X 10.
reliable & caring since 1976
P/N: 499D
Digital Static Charge Meter to check ESD Safety
Routine ESD Surface Resistivity Tester with Digital Display
(not mere LEDs indication as in low priced models)
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes any mechanically damaged and electrically misused part.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
69Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
reliable & caring since 1976
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes any mechanically damaged and electrically misused part.
Top-of-the-line Combo Wrist Strap & Footwear ESD Tester Model 492E
Connectors for Foot Plate
Connector for Door Access Control System
Connector for Power Supply
Connector for RS232 PC Interface
Test Switch for Footwear
Test Switch for Wrist Strap
Test Result indicators
used by many MNCs in repeat orders ANSI ESD S20.20 Compliant •
Low Battery Indicator
Test Result Indications
PASS PASS FAIL HI FAIL LO FAIL HI FAIL LO
Wrist Strap PASSResistance in range
Foot Wear PASSResistance in range
Foot Wear FAILResistance High
Foot Wear FAILResistance Low
Wrist Strap FAILResistance High
Wrist Strap FAILResistance Low
Nine Test Lights for Wrist Strap and Foot Weartesting (3 Pass Green, 3 Fail Low & 3 Fail high)
• Has 2 Test Modes: Single Test Mode: Checks the ESD status of - Wrist Strap or Footwear.
Comprehensive Test Mode: Checks the ESD - status of both Wrist Strap and Footwear. Customer can connect it to Door Control System •
thru Access System Control Signal from this Tester.uses micro-current testing for stable and This Model •
accurate results.Low Voltage Alarm Function: when the battery goes •
low in this Tester, there will be alarm indication.
Power supplyTouch-Point Switching Output
Accuracy
Access ControlSignal Output
.Dimensions (approx )Weight (approx ) .
Specifications
: 9V Battery: Voltage ≤ 400V (peak, DC or AC) Switch Current ≤ 130 mA Touch-Point Resistance of < 30Ω Touch-Point CloseTest PASS: Touch-point Test FAIL: open: Wrist Strap testing: ± 10% Footwear testing: ± 10% ( KΩ), 100 ± 20% (100 MΩ), ± 30% (1 GΩ): ±400V (Peak DC/AC); 100mA (Recommended Relay KAQW214): 160 mm x 100 mm x 40 mm: 0.6 kg (Test Unit only)
Features
This Combo Tester be edcan connect to Door Control Control System thru Access System Signal from this
. It gives signal of ±400V (Peak DC/AC); 100mATesterto operate relay (KAQW214) of Access Control System
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
70Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
Interfacing with Door Access System will have to be done by the customers only
shown trademarks are property of their respective owners. Warranty is 12 months from the date of invoice. It excludes any mechanically damaged and electrically misused part.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
P/N: 445D+446
• Compact design for easy operation Rapidly neutralizes static charges• Built-in regulator of remnant voltage for effective ion balancing • Two ionizing Air Guns can be connected with Power Supply model 446 •
The 445D Ionizing Air Gun is used for removing static charge and dust of the inaccessible charged object. It will easily clean the parts from static charge and also will keep the same static free after that.
Features
Specifications
Input VoltageSecondary Output VoltagePower ConsumptionExternal Air requirementEffective DistanceDischarge TimeStandard length of Cable
: 220VAC/50Hz: 4.0 KVAC (0 ~ -40%): 20 Watt: 0.1 ~ 0.7MPa (Dry & Clean): within 1000mm: 0.4S (Test Distance: 15cm): 3 meter (approx.)
Model 445DIonizing Air Gun
Model 446High Voltage Power Supply
Pressure
0.2MPa
0.4MPa
0.6MPa
0.7MPa
Air Flow
0.06m /min3
0.12m /min3
0.18m /min3
0.20m /min3
Decay Time
1.2s
0.6s
0.4s
0.3s
Noise
≤71dB
≤88dB
≤95dB
≤98dB
Note: Testing distance 15 cm from the outlet of the air gun
Time for Static Neutralizing
Stainless Steel Body Static Charge Eliminator
• Compact size, light weight, portable design with adjustable angle
Rapidly neutralizes static charges•
Adjustable fan speed can generate large range of ion stream•
Stable ion balancing•
Long lifetime magnetic transformer protect the unit from short circuit•
Built-in emitter cleaner for easy cleaning•
Stainless steel housing, ideally suitable for clean room applications•
Power consumption
Output Voltage
Ion Balance
Air Volume
Effective range
Ozone production
Noise
Dimensions
Weight
: 30 Watt
: 5.6 KVAC
: ±10V
: ≤2.4m /min3
: 400 x 1500mm
: ≤0.03ppm (150mm from centre of air outlet)
: 45dB
: 140x84x220mm (approx.)
: 2.4 Kg (approx.)
Specifications
Stainless Steel body for Cleanroom applications
reliable & caring since 1976
High Quality ESD Safe Static Charge Eliminators
P/N: ESDSET28
Ionizing Air Gun + High Voltage Power Supply
71Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
ESD Safe Screwdriver Set (6pcs SL/PH )of types P/N: T4741SESDCK Tools Germany
- Slotted Screwdriver 3 x 75mm- Slotted Screwdriver 3 x 100mm- Slotted Screwdriver 5 x 135mm
- Philips Screwdriver #0 x 60mm- Philips Screwdriver #1 x 80mm- Philips Screwdriver #2 x 100mm
• Ergonomic tri-lobe handle design for comfort and effective delivery of torqueFully ESD compliant for safe use on sensitive electronic components• Toughened alloy steel blade for exceptional strength & durability • Black anti-peel finish eliminates the risk of damage from flaking chrome• Handle injection moulded directly to blade giving the ultimate •
bond for increased reliability and durability
The Set contains:
C.K ToolsGermany
R
ESD Safe SMD Side Cutter (Slim - Relieved Head) CK Tools Germany P/N: T3886
• Sharp, precision cutting edges with extra full flush cut Special tool steel blade, hardened for long term cutting performance•ESD handles - dissipative 10 Ohm8 •
ual component handle design for comfortable workingD• Smooth-action return spring for convenience during •
repetitive workCutting Capacity: 1.3mm dia wire• Length: 140mm (approx.)• C.K Tools
Germany
R
reliable & caring since 1976
CK Tools Germany ESD Safe High Quality Electronics Assembly Tools
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
There is no warranty for these consumable type items.
72Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
ESD Safe Side Cutter (Reverse action cutting blades) CK Tools Germany P/N: T3884
• Special reverse action cutting blades ~ for accurate cutting of DIP pins Micro, tapered head for greater access in confined spaces •
• Special tool steel, blade hardened for long term cutting performance• Black oxidized finish for corrosion resistant and anti-glare • Dual component handle for comfortable working
Smooth-action return spring for convenience during • repetitive work
Cutting Capacity: 1.3mm dia copper wire• • ESD handles - dissipative 10 Ohm8
Length: 132mm (approx.)• • Cutting angle: 48°
C.K ToolsGermany
R
ESD Safe Precision Wire Stripper CK Tools Germany
For safe and damage-free stripping of fine insulated solid wires where it is critical to prevent damage from electro-static charge and also to avoid any cutting nick on conductor
• ESD handles - dissipative 10 Ohm8
• Dual component handle design for comfortable working• Black oxidized finish for corrosion resistance
C.K ToolsGermany
R
precise holes fornick-free stripping
• Stripping capacity: 0.2 0.8mm 5, 0.32, 0.4, 0.5, 0.6 & , 28, 26, 24, 22 & 20(30 AWG)
• Smooth-action return spring for repetitive workAlso has Cutting Capacity: 3.0mm dia wire• Precise stripping notches for nick-free stripping•
• Stripping capacity: , 0.8, 1.0 & 1.3mm 0.4, 0.5, 0.6 26, 24, 22 20( , , 18 & 16 AWG)
CK Tools Germany P/N: T3893 CK Tools Germany P/N: T3894
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
There is no warranty for these consumable type items.
73Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
CK Tools Germany Classic 8 inch Combination Plier CK Tools Germany P/N: T3621B8
C.K ToolsGermany
R
• Induction hardened jaws for outstanding long term performanceHigh quality steel, drop forged, hardened and tempered for •
exceptional strength and durabilityHeads polished and lacquered for corrosion protection• Wipe clean PVC handles for added convenience • Length 200mm (8 inch)• Precision engineered jaws for exceptional grip• Cutting capacity:•
- Hard wire upto 2.0mm dia - Medium wire upto 2.8mm dia - Soft wire upto 4.0mm dia
• Cutting capacity: 1.3mm dia copper wire Comfortable TPR coated grip •
for fatigue-free working Light weight, easy to handle• Length: 132mm (approx.) • Equipped with a •
return spring. Return spring increases ease of cutting with an automatic opening of jaws
Precision Cutting Plier P/N: CHP-170 Precision Cutter P/N: GPL-133
• Cutting capacity: 1. mm dia copper wire0 Comfortable TPR coated grip •
for fatigue-free working Light weight, easy to handle• Length: 13 mm (approx.) 0• Equipped with a •
.return spring Return spring increases ease of cutting with an automatic opening of jaws
CK Tools P/N: T3775
CK Tools Germany Classic Precision Side Cutters
CK Tools P/N: T3774 C.K ToolsGermany
R
• Special alloy steel, drop forged, hardened & tempered for exceptional strength & durabilityPrecision box joint construction for permanent adjustment free jaw alignment• Induction hardened jaws for outstanding long term performance• Mirror polished surface eliminates the risk of damage from flaking chrome• Spot welded double leaf springs for consistent, repetitive action PVC handles for comfort & grip• •
• Cutting Capacity: 1.5mm dia wireLength: 120mm (approx.)•
• Cutting Capacity: 2.0mm dia wireLength: 135mm (approx.)•
Precision Tweezer with Serrated Tips and Serrated Grips P/N: OOD-SA
• For applications requiring strong grip tips Fine straight tip with serrations• Material: Stainless Steel• Length: 120mm (approx.)•
120
10.5
High Quality Electronics Assembly Tools, Aids and Accessoriesreliable & caring since 1976
Solder Wire Reel Stand with guide is used to hold the Solder Wire Reel. This stand has Collection Plate also for drop-out solder wire to avoid mess on the working table.
• Holds upto 1 kg roll of older ireS W Maximum Solder Spool width: 80mm• Shaft Diameter: 15mm • Keeps Work Bench neat and clean • Provides smooth draw out of Solder Wire • Size: 145(L) x 113(W) x 120(H)mm (approx.)•
MetallicCollection Plate forsolderdrop-outs
Solder Wire Reel Stand P/N: IRWRH500
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
reliable & caring since 1976
There is no warranty for these consumable type items.
• Magnification: 4XLens diameter: 60mm• Lens material: Acrylic• Material: ABS• LED illumination• Uses three AAA batteries•
Handheld LED Illuminated Magnifier P/N: GS-378Super Fine Mesh Desoldering Wick1.5 mm width
• High quality Desoldering Wick with no clean flux Pure oxygen-free copper wire• Width: mm1.5• Length: 1.5 meter•
Universal 360 Degree Swivel Table Clamp Vise
P/N: GV-190
This handy vise can be placed anywhere on workbench. The ball cup allows the vise to be adjusted to any angle for extreme versatility. Padded rubber jaws open upto 78mm • Mounts to bench top up to 50mm thick• Rotates 360 degree• 0 to 90 degree swivel position•
Pre-Cut Cleaning Sponge P/N: ICS-XXXX
• S c S Tponge leans surface oxidation from oldering ipsMade from natural cellulose •
• Does not stick on oldering ipsS TSize : Available s•
- P/N: ICS-5570 (55x70mm) - P/N: ICS-3055 (30x55mm)
How to use these Cleaning Sponge:- Dip the Sponge in water and squeeze it maximum.- Only moist sponge cleans soldering tips throughly.- Excess water in sponge damages the oldering ipsS T
High Quality Electronics Assembly Tools, Aids and Accessories
Spring Loaded No-Clean Flux Pen
P/N: 8100 for prolonging the life of Soldering Tips
• Regular use will prolong the life of Soldering Tips. It is compatible with leadfree and •
non-leadfree solders Rotate the hot soldering tip on •
solid paste surface for regeneration. Note: There is no shelf life for this.
Weller Tip Activator
For precision flux application in a convenient micro tip Pen format. Gently press the chiseled tip against work surface to start the flow. The dispensing mechanism eliminates dripping, pooling and wastage.
Dry Metal Wool type Tip Cleaner Soldering
• Made from brass wire and comes with a convenient holder for easy use. It features low abrasive brass wire which •
clean the Soldering Tips thorougly.helps to
Tip Cleaner is perfect tool for cleaning S Tthe hot oldering ips without
decreasing the temperature of soldering tip while cleaning, as happens in normally while cleaning with wet sponges
P/N: ISTCW-1618Spare Dry Wool
P/N: ISTC-1615
• 1000 Pcs assortment Kit10 Colours Cable Ties• Length: 4 inch• Packed in transparent •
round barrel with handle
P/N: CVK-10001000 Pcs Assorted Cable Ties
74Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
Flux Application Bottle with Brush P/N: IFABB-60
• Dispenses flux smoothly
Integrated dispensing brush for smooth application of flux.•
Cap to cover the brush when not in use to avoid •
evaporation of flux.
Capacity: 60 ml•
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
There is no warranty for these consumable type items.
75
• For cable ties of 2.2 to 4.8mm width Professional quality •
Cable Tie Gun Tension adjustment mechanism•For tie thickness: <1.6mm •Automatic cut-off•
- Just pull the trigger and the tie will automatically tightened and cut
Professional Cable Tie Gun P/N: GTA-312
• Blades are made from surgical steel and honed for fine cutting
4 Jaws Chuck holds the blade securely• High impact plastic safety cap• Spare pcs set available optionally10 blades•
Knife with Aluminium handle P/N: GKN-014
High Quality Electronics Assembly Tools, Aids and Accessories
• Ideal for general purpose soldering Cushion grip for comfort gripping•Input supply: 230VAC •Power: 0 Watt 5•Fitted with long life Soldering Tip •Ceramic heating element consistent heating for •
P/N: ZD-30CN
Mains-operated Soldering 50 WattIronDesoldering Pump
• Durable construction, fully Aluminium bodyLong lasting rust-free spring• High efficiency in a very compact design• Suction Capacity: 30cm-Hg• Light weight, easy to operate•
P/N: ZD-192A
Flux Application Bottles with Needle
P/N: IFABN-100 & IFABN-60
Easy to re-fill•• Stainless Steel Fine Tip Needle Made up of Transparent Polyethylene•
Ideal for dispensing flux or any other liquids Squeeze bottle for precise liquid dispensing- IFABN-100: Capacity 100ml - IFABN-60: Capacity 60ml
Flux Application Bottles with Needle
P/N: WTS-001
• Stainless Steel Fine Tip Needle • Made from Transparent
Polyethylene Easy to re-fill•
Capacity: 60ml•
Ideal for dispensing flux or any other liquids Squeeze bottle for
precise liquid dispensing
Alignment Tool for Trimming applications P/N: IAT-200
• Ideal for trimming applications
Stainless Steel Tip•
Length: 200mm•
Tip Width: 2mm•
reliable & caring since 1976
Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745
shown trademarks are property of their respective owners.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
There is no warranty for these consumable type items.
76
Various Accessories and Consumables for Dispensing Systems
100CC Dispensing Barrel with Piston Transparent colour P/N: IDB-T100CC
- Suitable for commonly used liquid materials
- Straight design in conjunction with high
precision piston
- Excellent flow properties
- Achieve preci dispensingse
reliable & caring since 1976
55CC Dispensing Barrels with Piston
- Suitable for optical light sensitive adhesives- Straight design in conjunction with high precision piston
P/N: IDB-XXX
P/N: IDB-A55CCTE Amber UV Resistant Barrel
- Excellent flow properties - Achieve preci dispensingse
P/N: IDB-B55CCTE Black UV Resistant Barrel
P/N: IDB-T55CCTE Transparent Barrel
Adaptor for 55CC Barrels P/N: IDA-55CC
- Suitable for 55CC barrels - Designed with a safety locking action to prevent accidental disengagement- Precision molded for easy to install and remove with minimal effort- Molded Adaptor with flexible polyurethane air hose
The Adapter connects the Dispensing Barrel to the air output of the Liquid Dispensing System
Each needle using precision machining, precision polishing needle tube wall, no edges, to ensure is made continuous dispensing accuracy.
Dispensing Needles
P Syringe Needle P/N: I DN -2lastic base F P 0G
Specifications
G 20
Inner Dia
mm0.60
Colour
Grey
P Syringe Needle P/N: IFDN - lastic base G 18G
Specifications
1 G 8
Inner Dia
mm0.84
Colour
Green
All-Plastic clined Needle F G 16GDe P/N: I DN -
Specifications
16G
Inner Dia
1.2 mm0
Colour
Grey
P Syringe Needle P/N: IFDN - lastic base B 19G
Specifications
1 G 9
Inner Dia
1.2 mm7
Colour
Black
Website: www.indeonline.in Email: [email protected] & [email protected] Phones: 9316134502 & 9815600745