USER'S MANUAL Mobile Scouting Camera Ltl-5210M Series
27
USER’S MANUAL Mobile Scouting Camera Ltl‐5210M Series
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of USER'S MANUAL Mobile Scouting Camera Ltl-5210M Series
USER’S MANUAL
Mobile Scouting Camera
Ltl‐5210M Series
GENERAL INFORMATION
1.1 Introduction
The Ltl Acorn M Series (Model Ltl‐5210MC and Ltl‐5210MM) is the second generation of our Ltl‐5210
scouting camera. Bundled with the MMS‐module (Multimedia Messaging Service) battery box (Part #
LTL‐MM), the standard scouting camera (Part # Ltl‐5210M) can be upgraded to work as a remote cellular
camera. With its highly sensitive Passive Infra‐Red (PIR) sensor, the camera detects the sudden change
of ambient temperature caused by moving game in a region of interest (ROI), triggers to take
pictures/videos, and sends the images via GSM network to the user’s cell phone or email account.
Features:
• Programmable 5 or 12‐Megapixel high‐quality resolution.
• Infrared night vision LEDs for flash range as far as 65 feet
• In “Cam + Video” mode, camera takes both pictures and video at every trigger event
• Ultra low standby power consumption. Extremely long in‐field life (in standby mode, up to 6 months
with 8 x AA batteries)
• Unique side Prep Sensor design provides wider sensing angle and enhances camera’s response speed
• Perform in the most extreme temperatures from ‐22°F to 158°F
• Compact size (5 ½ x 3 ½ x 2 ½ inches). Well designed to deploy covertly
• Impressively quick trigger time (1.2 second)
• In Time Lapse setting, the camera automatically and constantly takes pictures/videos at specified
interval. This is very useful when observing plants flowering, birds building nest, or when monitoring
unattended properties such as parking lots
• With Timer setting on, the camera can be programmed to only work in specified period every day. This
feature can work together with Time Lapse feature
• Backpack‐looking tree grabber makes mounting and aiming a snap
• Serial Number setting enables you to code locations in the photos. This helps multi‐camera users
identify the location when reviewing the photos
• Built‐in 2 ¼” TFT color display to review images and videos
• Date, time, temperature and moon phase can be stamped in the pictures
• Lockable and password protected
• Two MMS image sizes to choose: 640 x 480 or 320 x 240
• Users can configure the Camera and MMS function either by running the enclosed CD on the
computer, or directly on the built‐in TFT display.
• Separation of the Camera and the MMS module provides users flexibility: starting with the value
model as a standard scouting camera, and upgrading to the premium model with MMS function.
• If local area mobile signal is bad , Could not send MMS, Also can choose to send a text message(SMS).
Message content is taking pictures time and Camera serial number.
• Our Advanced Remote Cellular Technology transmits images to your cell phone and email account
constantly at lower battery consumption and shorter transmission time, compared to products of its
kind on the market.
• Automatically send text alert when battery power level goes low
• Check cellular signal information on the built‐in TFT display in the field
• All MMS pictures saved in SD card as well as the original ones
• Internal antenna design makes the camera portable while still emitting strong signal
• Operates globally via GSM/GPRS network. Supports four bands: 850 / 900 / 1800 / 1900MHz.
1.2 Application
• Trail camera for hunting
• Animal or event observation
• Motion‐triggered security camera, for home, office and community
• All other indoor/outdoor surveillance where invasion evidence needed
1.3 Illustration
• Figure 1.1 shows the front view of the camera (Part # Ltl‐5210M)
• Figure 1.2 shows the bottom view of the camera (Part # Ltl‐5210M)
• Figure 1.3 shows the back view of the camera (Part # Ltl‐5210M) and front view of the battery box
(Part # LTL‐BM1 or LTL‐MM1)
F
F
Figure 1.1
Figure 1.2
The came
jack, and
modes: O
To power
camera. F
achieve lo
batteries.
CAUTION:
you remo
which wo
era provides t
external DC p
FF, ON and T
up the came
FOR BETTER P
onger in‐field
(Please refer
Fig
: If you are no
ve the batter
uld void the w
he following
power in jack
EST.
era, install fou
PERFORMANC
life, always in
rence Append
gure 1.3: Back
ot using the c
ries from the c
warranty.
connections f
. The 3‐way P
ur NEW high‐p
CE, WE RECOM
nstall the add
dix III: Instruc
k View of Ltl‐5
amera for an
camera to avo
for external d
Power/Mode
performance
MMEND USIN
ditional batte
ction on Insta
5210M and Fr
n extended pe
oid possible a
devices: USB
Switch is use
alkaline or lit
NG ENERGIZE
ry box which
lling Battery
ront View of
eriod of time,
acid leak that
2.0 port, SD c
ed to select th
thium AA bat
R LITHIUM AA
contains fou
Box)
Battery Box
it is highly re
t may damage
card slot, TV o
he main opera
tteries in the
A BATTERIES.
r more AA
ecommended
e the camera
out
ation
. To
that
a
2.1 Insert
You need
your local
(MPNO), m
Multimed
them for t
configure
(Please re
on PC in t
Open the
the SIM c
2.2 Load B
To install
•
•
•
•
t SIM Card (O
to purchase
l Mobile Phon
making sure t
dia Messaging
the relevant i
the MMS set
eference 3.4 S
he Advanced
battery comp
ard in the slo
Batteries
batteries on t
Open the bo
Push the cov
Install 4 AA b
Replace the c
Only for Mode
the SIM card
ne Network O
they provide
g Service (MM
information t
ttings on you
Set up MMS F
Operation se
partment cov
t and lock it.
the camera (P
ttom cover b
ver of the batt
batteries. Ma
cover.
QU
el Ltl‐5210MM
from
Operators
MS). Ask
to
r camera.
Function
ection.)
ver, slide
Part # Ltl‐521
y pulling dow
tery compart
ke sure the p
UICK START
M)
Figure 2‐1
10M), please f
wn the lock ho
tment and rel
olarity match
MMS‐modul
follow the ins
ole.
lease. It will p
hes the sign o
le Battery Box
structions be
pop out.
on the cover.
x
low.
To install
III: Instruc
Alternativ
both exte
preferent
can work
When bat
Ltl‐5210M
email acco
2.2 Insert
The came
memory c
sure the w
supported
it before p
CAUTION:
BATTERIE
the additiona
ctions on Inst
vely the came
rnal power a
ially. Bundled
in the field ov
ttery level get
MM, a “Batter
ount.
t SD Card
era does not c
card or SDHC
write‐protect
d memory cap
putting the ca
: ALWAYS SW
ES OR THE SD
al battery box
alling Battery
era can run on
nd batteries a
d with our ext
ver one year
ts low, the M
ry Low” text a
come with int
(High Capaci
switch on the
pacity is up to
amera in use.
WITCH THE CA
CARD.
x (Part # LTL‐B
y Box)
n an external
are connecte
ternal solar p
without chan
otion Indicat
alert will be se
ternal memor
ty) card. Befo
e side of the
o 16GB. If you
.
MERA TO OF
BM1 or LTL‐M
6V~12V DC p
d, the camera
power supply
nging batterie
or in the LED
ent automati
ry. So it will n
ore inserting t
SD card is “of
u use a card c
FF MODE BEFO
MM1), please
power source
a will be pow
(purchased s
es.
array will fla
cally to the u
not work with
the SD card in
ff” (NOT in th
capable of ab
ORE YOU INST
reference Ap
e (optional). W
wered by the e
separately), th
sh blue. On M
user’s cell pho
hout a SD (Sec
nto the card s
he “Lock” pos
ove 16GB, m
TALL OR REM
ppendix
When
external one
he camera
Model
one or
cure Digital)
slot, please m
ition). The
ake sure you
MOVE THE
make
test
2.4 Enter
Switch to
a regular
“shortcut
• Press th
• Press th
• Press th
setting) w
the SHOT
• Press th
monitor.
you to pro
in the Adv
Under the
Infrared)
• First stra
• Walk slo
angles fro
Test Mode
the TEST pos
digital camer
” functional k
he key to
he key to
he SHOT key t
will be taken a
key, switch t
he REPLAY key
Use UP and D
ogram the ca
vanced Opera
e test mode, o
sensor, speci
ap the camer
owly from on
om the camer
sition to ente
ra, or enter th
keys (see Figu
set the came
set the came
to manually t
and saved to t
the power OF
y to review/p
DOWN key to
mera to work
ation section.
one useful fu
fically the sen
ra on a tree a
e side of the
ra.
r the Test mo
he Menu to se
ure 2‐3) worki
F
era to shoot v
era to take sti
trigger the sh
the SD card. I
FF, remove th
playback phot
navigate. Th
k the way you
nction you w
nsing angle an
iming the reg
ROI to the ot
ode. In this m
et up parame
ing as below:
Figure 2.3
video clips.
ill pictures.
utter. A phot
f the display
e SD card and
tos/videos on
ere is anothe
u want. Please
ould like is te
nd distance. T
gion of interes
her parallel t
ode you can t
eters. On the
to or video (d
shows “CARD
d slide its wri
n the LCD scre
er key, MENU
e make refere
esting the wo
To perform th
st (ROI).
o the camera
take pictures
keypad there
epending on
D PROTECTED
te‐protect sw
een, or a conn
U, on the keyp
ence to 3.1 P
rk area of the
he test:
a. Try differen
s or video clip
e are four
the camera
D” when you p
witch to off.
nected TV
pad that allow
arameter Set
e PIR (Passive
nt distances a
ps like
press
ws
ttings
e
and
• If the Motion Indicator flashes blue, it indicates the position from where you are detected by one of
the side Prep PIR sensors. If the Motion Indicator flashes red, it indicates the position from where you
are captured by the main PIR sensor. By doing this test, you can find the best placement when mounting
and aiming the camera. In general, you are recommended to place the camera 3 to 6 feet (1 to 2
meters) above the ground.
To avoid potential false triggers due to temperature and motion disturbances, please do not aim the
camera at a heat source (i.e. the sun) or nearby tree branches and limbs. The ideal direction to aim at is
North or South. Also, remove any limbs close to the front of the camera.
2.5 Enter Live Mode
Switch to the ON position to enter the live mode. The Motion Indicator will flash red for about 10
seconds and the camera starts working by itself without any manual handling. It will at once shoot
pictures or record videos when game or other objects enter the PIR area of the main sensor directly. If
the game enters the PIR area of the prep sensors from the side, the prep sensors detect the movement
and activate the camera. While the game keeps moving into the PIR area of the main sensor, the camera
takes photos/videos immediately. If the game roams away after entering the PIR area of the prep
sensors, the camera will power off and enter standby mode.
2.6 Advantages of Prep Sensors
In general, to save battery power, an Infer‐Red camera is in “sleep” mode, with only the PIR sensor
working. When game is detected by the PIR sensor, the camera is powered on and starts shooting
pictures. The time period from being activated to starting firing is called trigger time. The trigger time
varies among different scouting camera brands in the market, generally from 1 to 5 plus seconds. Our Ltl
Acorn scouting camera has an impressive 1.2 second trigger time. However, when game passes across
very quickly, the picture may only capture the rear part of the body, and possibly nothing at all.
With the unique side prep PIR sensors design, our Ltl Acorn solves this issue. The combination of the two
side prep sensors and the main sensor comes up with a 100 to 120° angle of induction, a very wide cope
far outweighing the 50 ° angle of the camera lens. When game first crosses the PIR area of the prep
sensor, the camera is activated and ready to shoot after 1 second. If the game continually enters into
the PIR area of the main sensor, the camera takes pictures immediately, therefore catching the whole
body of the game. This split‐second process could be as short as 0.2 second.
In the case the game browses only in the PIR area of the prep sensors, to avoid the camera being
powered on constantly, the system is designed to work in the following way: If the game does not enter
the PIR area of the main sensor and therefore not trigger the main sensor, the camera will power off
after 3 seconds. If the trigger events consecutively happened twice only in the PIR area of the prep
sensors, the camera will not be activated by the side prep sensors, but only by the main sensor. So later
on when the game enters the PIR area of the main sensor eventually, since it is not in fast movement,
the picture will by all means capture the whole body of the game based on our standard 1.2 second
response time.
ADVANCED SETTINGS
The Ltl Acorn trail camera comes with preset manufacturer settings. You can change the settings to
meet your requirements. Please make sure the camera is in the test mode.
3.1 Parameter Settings
Press “MENU” key to enter/exit the menu. Press Up , Down to move the marker, LEFT , RIGHT to change
the setting, and OK to confirm the change. Always remember to press OK to save the change. Otherwise
you will lose your new setting.
Parameter Settings (Bold = default)
Description
Mode Camera, Video,
Cam+Video
Select whether still photos or video clips are taken. In Camera+Video mode, camera first takes photos and then shoots videos immediately.
Format Enter All files will be deleted after formatting the SD card. Highly recommend you format the SD card if it has been used previously on other devices. Caution: make sure wanted files on the SD card have been backed up first!
Photo Size (affects still photos only)
5MP, 12MP, 1.3MP Select desired resolution for still photos from 1.3 to 12 megapixels. Higher resolution produces better quality photos, but creates larger files that take more of the SD card capacity. Besides, larger files require longer time to write to the SD card, which will slightly slow the shutter speed. 5MP is recommended.
Video Size (affects video clips only)
640×480, 320×240
Select video resolution (pixels per frame). Higher resolution produces better quality videos, but creates larger files that take more of the SD card capacity. 640×480 is VGA mode in standard 4:3 format.
Set Clock Enter Press Enter to set up date and time. Internal
capacitor will retain the clock time for up to 7 minutes when changing batteries.
Picture No. (affects still photos only)
01 Photo, 02 Photos, 03 Photos
Select the number of photos taken in sequence per burst in Camera mode. Please also refer to the Interval parameter.
Video Length (affects video clips only)
Avi 10s, optional from 1s to 60s
Videos are in AVI format that can be played back on most media players.
Interval 1 Min, optional from 1S to 60M
Select the length of time that the camera will wait from when the last picture was taken and written in the SD card, until it responds to any new triggers from the PIR sensor. During the selected interval, the camera will not take pictures/videos. This prevents the SD card from filling up with too many redundant images.
Sense Level Normal, High, Low Select the sensitivity of the PIR sensor. The High setting suits indoors and environments with little interference, while the Normal/Low suits outdoors and environments with more interference. Temperature also affects the sensitivity. The High setting is suitable when the ambient temperature is warm, and the Low setting is helpful in cold weather.
Time Stamp (affects still photos only)
On, Off Select On if you want the date & time imprinted in every photo.
Timer Off, On Select On if you only want the camera to work within a specified time period every day. For instance, if the starting time is set at 18:35 and the ending time at 8:25, the camera will function from 18:35 the current day to 8:25 the next day. utside the time period the camera will not be triggered or take photos/videos. This feature can be used together with Time Lapse feature.
Password Set Off, On Set up a password to protect your camera from unauthorized users.
Serial No. Off, On Select On to assign a serial number to each camera you have. You can use the combination of 4 digits and/or alphabets to record the location in the photos (e.g. YSP1 for Yellow Stone Park). This helps multi‐camera users identify the location when reviewing the photos.
Time Lapse Off, On If set On, the camera will automatically take photos/videos at the set interval (Note: in this mode, the PIR sensor is disabled). This is helpful when observing cold‐blooded animals like snakes, or the process of flowering, etc.
This feature can work together with Timer feature.
Side PIR On, Off The default setting is On. The two side prep PIR sensors provide wider sensing angle and enhance response time. (Reference 2.5 Advantages of Prep Sensors.) However, in some situations you have difficulty removing the interfering branches, or avoiding the sunlight. If so, you have the option to turn off the side sensors.
MMS Phone No. Enter Press Enter to input the phone number you want to send MMS to. To input more phone numbers, or to set up email accounts, reference 3.4 Set up MMS Function on PC. In the submenu, you can set the daily number of pictures sent via MMS. 0 stands for Unlimited. 1‐99/Day gives you flexibility sending up to 99 pictures per day.
MMS Status Off, VGA, QVGA The default setting is Off, which turns the MMS function off. To turn it on, choose either VGA=640x480 or QVGA=320x240, which defines the resolution size of the MMS picture. If the original picture’s size too large, its MMS picture will be converted to QVGA format to save transmission time and power consumption.
Default Set Press OK Enter to return all your camera settings back to the manufacturer default. However, all the MMS function settings will remain except for MMS Phone No. and MMS Status.
3.2 File Format
The SD card stores all original pictures and videos in the folder \DCIM\100IMAGE, and all MMS pictures
in the folder \DCIM\MMS\100IMAGE with the same filename. Pictures are saved with filenames like
IMAG0001.JPG and videos like IMAG0001.AVI.
In the OFF mode, you can use the provided USB cable to download the files to a computer. Or you can
put the SD card to a SD card reader, plug in a computer, and browse the files on the computer without
downloading.
The AVI video files can be played back on most popular media players, such as Windows Media Player,
QuickTime, etc.
3.3 Set up
You can s
enclosed
from http
The follow
Click on C
Set up the
p Camera on
et up your ca
CD. You can a
p://www.send
wing window
Camera Setup
e camera bas
PC
mera and/or
also visit the
dspace.com/f
prompts:
, and you wil
ed on your ne
MMS functio
national distr
folder/7zd6ic
l see the follo
eed. Click on
on on your ho
ributor’s web
owing interfac
ome PC. Run t
site to downl
ce:
to retrieve th
the Setup.exe
load the prog
he computer
e file on the
gram, or dow
time.
nload
Click on
the SD ca
click on
selected.
root direc
If you like
At this po
camera, M
LTL‐MM1
Model Ltl
exit the in
Retrieve t
the TEST m
set up. Yo
ATTENTIO
3.4 Set up
After you
to
rd (You need
If you selecte
ctory of the S
e, you can use
int, if your ca
Model Ltl‐521
), skip the fol
‐5210MC, the
nterface.
the SD card fr
mode. A mes
ou are set wit
ON: THE PASS
p MMS Funct
click on Exit
o choose the
to insert the
. A file nam
ed a directory
D card before
e the manufac
amera is Mod
10MC, to Mod
lowing step a
e standard sc
rom the comp
sage will show
h the camera
SWORD CAN
tion on PC
on the Came
directory to s
SD card in th
ed menu.dat
y other than t
e inserting the
cturer default
el Ltl‐5210M
del Ltl‐5210M
and go directl
outing camer
puter and inse
w up on the T
a.
ONLY BE SET
ra Setup inte
save your set
he SD card rea
t will be creat
the SD card, y
e card in the
t settings by c
M, or you’ve
MM by purcha
ly to 3.4 Set u
ra, you’re don
ert it in the ca
TFT display, in
T UP ON THE C
rface, the fol
ttings, usually
ader and plug
ted and saved
you need to m
camera later
clicking on
just upgrade
asing the MM
up MMS Func
ne with the ca
amera. Switc
ndicating the
CAMERA, NO
lowing windo
y under the ro
g it in your co
d in the direct
move the men
on.
ed your stand
MS‐module ba
ction on PC. I
amera setting
h to the TEST
Camera has
OT ON THE PC
ow prompts a
oot directory
omputer.) The
tory you just
nu.dat file to
ard scouting
ttery box (Pa
f your camer
g. Click on Ex
T position to e
been success
C.
again:
of
en,
the
rt #
ra is
it to
enter
sfully
Click on M
MMS Setup, and you will se
‐‐Auto
ee the follow
o
ing interface::
First, you
you need
below sec
Gateway
pictures t
If you cho
Network O
Note: Bec
change ov
let the sys
program o
provided
notify us s
Click on
SD card (Y
on
you select
directory
Click on E
the TEST p
MMS func
to send co
3.5 Came
When you
the MMS‐
need to choo
to choose th
ction will pop
and Port. The
o be sent to.
oose Manual t
Operator (MP
cause each loc
ver time, we r
stem to confi
on the enclos
by your MPN
so we can up
to
You need to in
. A f
ted a director
of the SD car
xit to exit the
position to en
ction has bee
olor pictures t
ra Working w
u have the M
‐module batt
ose how you l
e country and
ulate with pa
en you can inp
You can ente
to manually i
PNO) to have
cal MPNO ha
recommend y
gure the sett
sed CD. If you
NO, or you hav
date our prog
o choose the
nsert the SD c
file named me
ry other than
rd before inse
e MMS Setup
nter the TEST
en successfully
to your cell p
with MMS
odel Ltl‐5210
ery box (Part
like to set up
d the Mobile
arameters per
put the phon
er up to three
nput all the p
them provid
s their own s
you verify all
ings. We pre‐
u find out thos
ve settings fro
gram.
directory to s
card in the SD
enu.dat will b
the SD card,
erting the SD
interface. Re
T mode. A me
y set up. Con
phone and/or
0MM, or you h
# LTL‐MM1),
the MMS Mo
Phone Netwo
rtaining to th
e number an
e different ph
parameters, y
e you all the
ettings for th
the settings w
‐store those s
se settings ha
om your MPN
save the setti
D card reader
be created an
you need to
card in the ca
etrieve the SD
ssage will sho
gratulations!
email accoun
have upgrade
, not only wil
ode or Manua
ork Operator
e selected M
d email addre
one numbers
you need to c
required info
eir MMS serv
with your MP
settings for e
ave changed a
NO that is not
ings, usually u
r and plug it in
nd saved in th
move the me
amera later o
D card and ins
ow up on the
You camera
nt every time
ed your Mode
l your camera
al. If you cho
r (MPNO). Aft
PNO, such as
ess you’d like
s or email add
contact your M
ormation.
vice, and thos
PNO, even yo
ach major MP
according to
t on our Oper
under the roo
n your compu
he directory y
enu.dat file to
on.
sert it in the c
TFT display,
(Model Ltl‐52
e it is triggere
el Ltl‐5210MC
a work as a st
ose Auto, the
ter doing that
s URL, APN,
e the MMS
dress.
Mobile Phone
se settings ca
u choose Aut
PNO in the
the informat
rators list, ple
ot directory o
uter.) Then, c
you just select
o the root
camera.Switc
indicating the
210MM) is al
d.
C by purchasi
tandard trail
en
t, the
e
n
to to
ion
ease
of the
click
ted. If
ch to
e
l set
ng
camera, b
requireme
• The cam
capacity. T
• SIM card
account.)
• Only wh
• The sign
take the r
• MMS pa
• The Tim
when exp
•
•
limit has n
computer
• The cam
3.6 View
You can fi
display on
Install the
MMS‐mo
camera to
MPNO na
and detac
but also send
ents.
mera is ON an
The camera i
d is installed.
The SIM card
hen the switc
nal is strong in
receiving pho
arameters are
mer function is
pecting incom
not been reac
r or on the TF
mera is station
Local MNPO
ind your local
n the camera,
e SIM card an
dule battery
o a TV using p
me and the s
ch the battery
pictures to yo
d functions. T
s in Cam mod
The MMS se
d is not passw
h is in OFF po
n the field. Th
ne with you a
e set correct.
s OFF. If you h
ming MMS pict
Make s
ched. If the d
FT display. The
nary while se
name and Sig
l Mobile Phon
, just like you
d 8 AA batter
box to the ca
provided TV A
signal strengt
y box. Then y
our cell phon
The SD card h
de or Cam+Vi
rvice is active
word‐protecte
osition, you in
he recipient’s
and do the se
have the Time
tures.
sure MMS Sta
aily limit has
en the daily li
nding MMS p
gnal Strength
ne Network O
can see the i
ries. Make su
mera. Switch
AV IN cable. W
h on the TV. I
ou can view t
e and/or ema
has enough sp
deo mode, no
e (some MMS
ed.
nstall the MM
phone numb
end‐and‐recei
er ON, make
atus is not set
been reached
imit starts to
pictures.
h on TFT Disp
Operator’s na
information o
re the camer
h to the TEST
Wait for 1 min
If you don’t h
the informati
ail account, w
pace. 8 AA ba
ot Video mod
S services nee
MS‐module ba
ber is entered
ive test on sit
sure you are
t OFF or SMS
Th
d, you can res
count from O
play .
me and the s
on a regular c
ra is switched
position. If yo
nute and then
have an acces
on on the TFT
when it meets
atteries with e
de.
ed pre‐paid b
attery box.
d correct. You
te.
in the specifi
S.
he setting is “
set that num
One.
signal strengt
cell phone.
in OFF positi
ou like, you ca
n you will be a
ss to a TV, wa
T display.
s the followin
enough powe
alance in the
u are suggeste
ied time perio
“0”, or the da
ber on your
h on the TFT
ion. Attach th
an connect th
able to view t
it for 1 minut
ng
er
ed to
od
ily
he
he
the
te
When app
indicating
If a code,
missing, o
•S
•C
•C
n
•C
•C
si
If No MM
buzzer wi
Make sure
pear Mobile o
g the signal st
instead of th
or going on. S
SIM: No SIM
CSQ: No signa
CREG: SIM ca
ot able to reg
CGREG: Not a
COPS: Search
gnal strength
M1 shows on t
ll be issued sh
e the battery
operators trad
rength. To al
e MPNO info
pecifically,
card or instal
als.
ard is passwor
gister with the
able to registe
hing for the M
h will show on
he screen, it
hortness thre
box has the
demark buzze
low the MMS
rmation, sho
led incorrect
rd‐protected,
e GSM system
er with GPRS
MNPO of the S
n the screen.
means the M
ee sound "di d
MMS‐module
er will be issu
S function to p
ws on the scr
ly.
, or deactivat
m.
network.
SIM card. Onc
MMS‐module i
di di".
e, not a stand
ued two soun
perform, at le
reen, it indica
ed due to zer
ce it is found,
is not found (
dard one.
nd "di, di". The
east one bar
ates somethin
ro balance in
the operator
(installed). M
ere are three
is required.
ng is wrong,
the account,
r’s name and
eanwhile the
bars
or
the
e
Attention
Secure th
normally.
minute be
aforemen
for one m
n:The camera
e battery box
When trying
efore detachi
ntioned. You n
minute, and th
MUST be set
x by locking u
to view the o
ng the batter
need to switc
hen try it agai
t in OFF posit
p the buckle.
operator’s na
ry box, you w
ch the camera
n.
ion when atta
Otherwise, t
ame and the s
ill more than
a to OFF posit
aching the M
the MMS func
signal strengt
likely see on
tion, install th
MMS‐module b
ction may no
th, if you wait
e of the code
he battery bo
battery box to
t perform
t less than on
es
x securely, w
o it.
e
wait
4.1 Ltl‐52
1
2
3
4.2 Mode
•Ltl‐5210
• Ltl‐5210
• LTL‐MM
Ltl‐5210M
10M Series C
. Ltl‐5210M C
. LTL‐BM1 Sta
. LTL‐MM1 M
els for Purcha
MM = Ltl‐521
0MC = Ltl‐521
M1 ‐‐‐‐‐ MMS‐
M Camera
Consists of Th
Camera
andard batter
MMS‐module b
ase:
10M Camera
10M Camera +
module batte
MM
LTL‐5210M
hree Parts:
ry box (witho
battery box
+ LTL‐MM1 M
+ LTL‐BM1 Ba
ery box
LTL‐MM1
MS‐module b
box
M SERIES PRO
ut MMS‐mod
MMS‐module
attery box
1
attery
DUCTS
dule)
battery box
LTL‐
b
BM1 Standar
battery box
rd
5.1 Preve
There are
compartm
materials
5.2 Powe
Lt
AA batter
path is iso
extend its
5.3 SD Ca
There are
we can. H
nt From Shor
e five electric
ment of the ba
. Otherwise it
r Supply and
tl‐5210M Seri
ries in the bat
olated from o
s life in the fie
rd
e plenty of dif
However, we c
rt‐Circuits
contacts abo
attery box, re
t would cause
Battery Box
ies camera ca
ttery box, and
thers and do
eld by being p
ferent brand
cannot guara
IMPORTA
ve the TFT di
espectively. N
e a short circu
an work on up
d the externa
es not charge
powered by a
SD cards on t
ntee every br
ANT INFORMA
splay on the c
NEVER contact
uit and theref
p to 12 voltag
l power supp
e nor discharg
n external so
the market. W
rand SD card
ATION
camera and a
t these electr
fore irreversi
ges. The 4 AA
ply form a thre
ge others. As
olar panel.
We tested on
will work com
above the bat
ric contacts w
ble damage t
A batteries in t
ee‐path para
a result, the
our camera a
mpatibly with
ttery
with any meta
to the camera
the camera, t
llel circuit. Ea
camera can
as many bran
h our camera.
allic
a.
the 4
ach
nds as
.
Please for
card.
5.4 Auto A
To extend
camera ru
our came
our came
the total n
with more
Note: Our
power cap
5.5 850nm
There are
up to 65‐f
however,
5.6 Moun
The came
position t
rmat the SD c
Adjustment o
d the battery
unning in Vide
ra takes thirt
ra automatic
number of vid
e useful infor
r camera perf
pacity deterio
m and 940nm
e two selects o
foot flash ran
is it emits ve
nt on Tripod
era can be mo
o secure the
card on the ca
on Video Len
life, you are s
eo mode or C
y percent mo
ally shortens
deo clips dou
mation.
forms at extre
orates drastic
m IR LED
of IR LED on t
ge whereas t
ry low‐glow f
ounted on a 1
bottom cove
amera before
gth
strongly sugg
Cam+Video m
ore full‐length
the video len
bles, even tri
eme cold env
cally. Therefo
the Ltl‐5210M
the latter up t
flash that is a
1/4" tripod. CA
r.
e use. If it doe
ested to use
ode. Compar
h video clips.
ngth so as to t
ples that of p
vironment as
re, the numb
M series came
to 30‐foot fla
lmost invisibl
AUTION: To a
esn’t work, pl
8 AA alkaline
red to produc
Besides that,
take more cli
products of its
low as ‐30°C
ber of video cl
era, 850nm an
sh range. The
le from 5 feet
avoid breakag
ease try anot
e batteries wh
cts of its kind
when batter
ps of more ga
s kind, which
(‐22°F), in wh
lips decrease
nd 940nm. Th
e benefit of 9
t away.
ge, always tur
ther brand SD
hen having th
on the marke
ry power gets
ame. As a res
provides use
hich the batte
s accordingly
he former pro
40nm IR LED,
rn the knob in
D
e
et,
s low,
sult,
ers
ery
y.
ovides
,
n
5.7 FAQs
• I set up
What sho
the came
• Why did
signal was
• I progra
How? The
phone. Ho
• Why did
when sen
• I was pr
“assumes
texts you
in a point
on MMS Fun
a new receiv
uld I do? Swit
ra OFF. Take
d it take so lo
s too weak. O
mmed the ca
e Ltl‐5210M s
owever, if the
d I receive som
ding pictures
retty sure the
s” you install n
when the po
before receiv
nction
ing phone nu
tch the came
one battery o
ng to receive
Or the batterie
amera to cons
eries camera
e signal is too
me pictures w
s. Or the signa
battery was
new batteries
wer is low. H
ving a text ale
umber. But th
era OFF. Wait
out of the MM
the MMS pic
es ran out.
stantly take p
is designed t
o weak, it may
with partial im
al was unstab
quite low. Bu
s when you st
owever, if yo
ert, the came
e MMS pictu
for at least tw
MS‐module ba
ctures / why d
pictures. But s
to constantly
y not work sta
mage, and som
ble.
ut I didn’t get
tart the came
ou replace the
era will get “co
res are still b
wo minutes. T
attery box, an
didn’t I receiv
some picture
send MMS p
ably.
me with “red
any text aler
era. It tracks t
e present batt
onfused” and
eing sent to t
Then switch i
nd then reins
ve any MMS p
s were not se
pictures to the
X”? The cam
rt. Why? The
the usage of t
teries with so
d not send a t
the old numb
it ON. Or, swi
stall it.
pictures? The
ent to my pho
e recipient’s
era was in m
camera
the batteries
ome “used” o
text alert late
ber.
itch
e
one.
otion
and
ones
er on.
FIRMWARE UPGRADES
6.1 Firmware Upgrades
The manufacturer reserves the right to upgrade the camera and the firmware. Follow the steps below to
implement the upgrades:
• Install batteries and the SD card.
• Back up SD card the contents to other area. Format the SD card on the camera.
• Retrieve the SD card and plug it in your computer (SD card reader may needed). Copy and paste the
FW5210A.bin file in the root directory of the SD card. (Inquire the national distributor if there is an
upgrade available and where to download it.)
• Retrieve the SD card and insert it back in the camera. Press “OK” key and put Switch to TEST position.
Look LCD appear boot LOGO and then loosen the “OK” key.
• Enter MENU, navigate the marker to DEFAULT SET, and press OK. The upgrade has been installed
successfully.
• Re‐format the SD card on the camera.
Attention: Ltl‐5210 / Ltl‐5210A/Ltl‐5210M firmware upgrade program not be compatible with each
other. In other word, an upgrade for Model Ltl‐5210M only applies to that model. If a camera is falsely
upgraded by running a non‐compatible program, it will quit working and needs to be sent back for
repair. This issue is not covered under warranty.
program not be compatible with each other
Appendix I: TECHNICAL SPECIFICATION
Model Parameters Ltl‐5210MC Ltl‐5210MM
Image Sensor 5 Mega Pixels Color CMOS Yes Yes
Max. Pixel Size 2560x1920 Yes Yes
Lens F=3.1; FOV=52°; Auto IR‐Cut Yes Yes
IR Flash 65 Feet/20 Meters Yes Yes
LCD Screen 48x35.69mm(2.36"); 480(RGB)*234DOT; 16.7M Color
Yes Yes
Operation Keypad 6 Keys Yes Yes
Memory SD Card (8MB ~16GB) Yes Yes
Picture Size 5MP/12MP/1.3MP = 2560X1920/4000X3000/1280X960;
Yes Yes
Video Size 640x480: 20fps; 320x240: 20fps Yes Yes
PIR Sensitivity High/Normal/Low Yes Yes
PIR Sensing Distance 65ft/20m(Below 77°F/25°C at the Normal Level)
Yes Yes
Prep PIR Sensing Angle Left and right light beams form an angle of 100°; Each lens covers 10°
Yes Yes
Main PIR Sensing Angle
35° Yes Yes
Operation Mode Day/Night Yes Yes
Trigger Time 1.1 Second (When using the 2G SD card) Yes Yes
Trigger Interval 0sec. ‐ 60min; Programmable Yes Yes
Shooting Numbers 1~3 Yes Yes
Video Length 1‐60sec.; Programmable Yes Yes
Camera + Video First take Picture then Video Yes Yes
Playback Zoom In 1~16 Times Yes Yes
Time Stamp On/Off; Include serial No., temperature and moon phase
Yes Yes
Timer On/Off; Programmable Yes Yes
Password 4‐Digit Numbers Yes Yes
Device Serial No. 4 digits and 26 alphabets set by yourself Yes Yes
Time Lapse On/Off; 1 Second ~ 24 Hours Programmable Yes Yes
MMS Status VGA = 640x480; QVGA = 320x240; OFF Programmable
Upgradable Yes
MMS Numbers “0” = Unlimited; 0 ~ 99/Day Upgradable Yes
MMS Phone No. 1 ~ 3 Phone Numbers Upgradable Yes
MMS E‐mail 0 ~ 3 E‐mail address Upgradable Yes
SMS 1~3 Upgradable Yes
Low‐Battery SMS Alert
“Battery Low” text alert sent Upgradable Yes
Power Supply 4xAA; Expandable to 8xAA Yes Yes
External DC Power Supply
Plug Size: 4.0x1.7 6 ~ 12V (1 ~ 2A)
Yes Yes
Stand‐by Current 0.4mA Yes Yes
Stand‐by Time 3~6 Months(4xAA~8xAA) Yes Yes
Auto Power Off Auto power off in 2 minutes if no keypad input
Yes Yes
Power Consumption 150mA (+350mA when IR LED lights up) Yes Yes
Low Battery Alert 4.2~4.3V Yes Yes
Interface TV out (NTSC); USB; SD Card Slot; 6V DC External
Yes Yes
Mounting Strap; Tripod Yes Yes
Waterproof IP54 Yes Yes
Operation Temperature
‐22~+158°F/‐30 ~+70°C Yes Yes
Operation Humidity
5% ~ 95% Yes Yes
Certificate FCC & CE & ROHS Yes Yes
Appendix II: PACKAGE CONTENTS
Part Name Quantity (Ltl‐5210MC)
Quantity (Ltl‐5210MM)
LTL‐MM1 MMS‐module battery box
Digital Camera 1 1 0
Additional Battery Box
1 (Standard) 1 (With MMS module)
1 (With MMS module)
TV AV IN Cable 1 1 0
USB Cable 1 1 0
Strap 1 1 0
External DC Cable (optional)
1 1 0
Installation CD 1 1 1
Warranty Card 1 1 1
Appeendix III: INST
BA
TRUCTION ON
ATTERY BOX
N INSTALLINGG
