UniqueTek Product Catalog - rev 07/20/22

UniqueTek, Inc. Phone: 480-507-0866 540 W. Iron Avenue Toll Free: 855-507-0866 Suite 118 FAX: 480-507-0867 Mesa, AZ 85210 Products for Shooting, Reloading & Competitive Marksmen e-mail: [email protected] Web Sales: www.uniquetek.com

PRODUCT CATALOG

UniqueTek, Inc. Mesa, AZ Phone: 480-507-0866 e-mail: [email protected] Toll Free: 855-507-0866 Products for Shooting, Reloading & Competitive Marksmen Web Sales: www.uniquetek.com

1

DILLON PRESS ENHANCEMENTS

POWDER HANDLING

Micrometer Powder Bar Kit™ (T1231) ............................ $79.95 Replaces the Powder Bar Adjusting Bolt with a true 40 thread per inch Micrometer! • Return Instantly to Any Powder Weight • Adjustments as small as 1/1000 inch • Fits all powder bar sizes, plus SL900 Shot Bar. – Also available preinstalled in a new powder bar. = $129.95 Arredondo Powder Drop Slide™ (T1267-x) …….……... $129.95 With Micrometer Powder Bar Kit™ Preinstalled • Prevents powder leaking and “galling” with

ultra fine-grained powders (e.g. Vectan SP2) • 0.7gn to 15gn Powder Drop Range (with Win 231) 2X Powder Hopper Tube™ (T1277-14) ……………...…… $37.95 For the Dillon Auto Powder Measure Replaces the original 7” powder hopper with a 14” hopper tube.* • Doubles Powder Hopper Capacity • Strong, Stain Resistant Polycarbonate Tube • Includes Precision Powder Baffle™ * Super 1050 requires 11” Tube (T1277-11) = $35.95 Precision Powder Baffle™ (T1278) ………………………... $9.95 For the Dillon Auto Powder Measure • Provides Consistent Flow of Powder to Powder Bar • 20 Gage Aluminum / Precision Water-Jet Cut • Simple Drop-In Installation Powder Measure Quick Change QD Tab (T1720) …….. $29.95 For Dillon Powder Measures. • Allows Quick Removal of Powder Measure • Not Tools Required … Just Your Fingers • Anti-Rotate Pads Prevent Powder Measure From Rotating on Powder Die Powder Measure Drain-N-Change™ Tool (T1347) ….... $17.95 Drain powder measure without removing powder measure from toolhead or press. Bulk Powder Feed Kit (T1676) ………..……………......... $29.95 For Dillon (And Other) Powder Measures. • Keeps Powder Hopper Full Continuously • Powder is Gravity Fed through Clear Tubing • Feed from 8lb or 4lb Powder Containers • Fits Powder Hoppers from 2.65" to 2.3" OD. FailSafe Bracket Kit (T1677) ………..……………............ $54.95 For Dillon 650 Presses. • 1/4" Thick Stainless Steel Bracket will NOT Flex or Bend. • Ensures Powder Bar Returns to the Same Position Every Time. 750 FailSafe Bracket Kit (T1746) ……………………….. $84.95 For Dillon XL 750 Presses. • 1/4" Thick Bracket will NOT Flex • Slotted Holes Allow Powder Measure to be Rotated to Clear Tall Dies in Stations 3 & 4 • Ensures Powder Bar Returns to the Same Position Every Time.

DILLON PRESS ENHANCEMENTS

POWDER HANDLING (cont’d)

Custom Powder Funnels (Pistol) (T1582-xx) ……….…. $39.95 For Dillon Powder Measures. • 2-Step Case Neck Expander • Reduces Powder Bridging – 9mm/.38 cal. (T1582-01) – 10mm/.40 cal. (T1582-02) – .45 cal. (T1582-03)

Rifle Powder Funnels (T1632-xx) …………..………......... $49.95 For Dillon Powder Measures. • 2-Step Case Neck Expander • Reduces Powder Bridging • 3 Spacers to Adjust for Most Cartridge Lengths

Available Calibers: .30 cal and 6.5mm/.264 cal.

.32 Caliber Powder Funnels (T1672-xx) …..………......... $49.95 For Dillon Powder Measures. • 2-Step Case Neck Expander • Reduces Powder Bridging • 3 Spacers to Adjust for Most Cartridge Lengths

Available Sizes: .3145", .3155", .3165" & .3175"

38 Spl. Wadcutter Powder Funnels ………………………. $39.95 For Dillon Powder Measures. • Optimized for DESO or HBWC Bullets • 12L14 Steel Case Hardened to FC55+ • Replaces Original Dillon Powder Funnels

– DEWC (T1735-01) – HBWC (T1735-02)

9mm/.38 HTC Powder Funnels …………………..…...… $43.95 For Dillon Powder Measures. • For 9mm/.38 cal. Bullets up to .356" • Expander Tip is 3X Longer than OEM Funnel • Prevents Shaving Hi-Tek Coated Bullets

– For Bullets up to .357” (T1736-01) – For Bullets up to .358” (T1736-02)

.45 HTC Powder Funnel (T1740) …….…………..…...… $43.95 For Dillon Powder Measures. • For .45 cal. Bullets (.451" – .425") • Expander Tip is 3X Longer than OEM Funnel • Prevents Shaving Hi-Tek Coated Bullets

.32 Cal. Wad Cutter Powder Funnel (T1672-05) ………. $49.95 For Dillon Powder Measures. • Optimized for Seating HBWC Bullets In .32 S&W Long Cartridges • Full Length Expander Tip • Perfect for Bullseye Competition

Powder Bar Spacer Bolt Kit These Bolts replace the white plastic Powder Bar Spacer Plugs on Dillon Precision powder measures. • SS Bolts & Spacer Washers • #8-32 Thread Tap • /32" Hex Wrench – Small Kit (T1751-S): for 4 Powder Measures = $14.95 – Large Kit (T1751-L): for 8 Powder Measures = $24.95

Powder Funnel Cleaning Adapter (T1758) ……….……... $24.95 Holds Dillon Powder Funnels so they can be spun up in an electric drill for cleaning. • Brass Set Screw Won’t Scar Powder Funnel • Fits into any 3/8" or larger Drill Chuck • Durable Corrosion Resistant 303 SS

NEW!


2

DILLON PRESS ENHANCEMENTS (cont’d)

PRIMER HANDLING

Spent Primer Chutes ...………………………………….. $29.95 No More Spent Primers on the Floor! • Replaces Spent Primer Cup • Primers fall through 3ft Clear PVC Tubing

into Any Convenient Container! • Simple Installation — For Square Deal ‘B’: ... (T1346-SDB) — For RL 550: ................ (T1346-550) — For XL 650: ................ (T1346-650) — For Super 1050: ......... (T1346-1050)

550 Primer Track Bearing (T1571) ................................. $35.95 For RL 550 Presses • Extends Support for Primer Bar by 1.4" • Prevents Primer Bar Drooping & Binding • Nickel/Teflon Plated for Smooth Cycling 650 Primer Feed Stop Switch (T1703) ………………...... $27.95 Temporarily Deactivates Primer Feed Mechanism. • Detents for ON and OFF Positions • Takes Just Seconds to Switch w No Tools • Easy Bolt On Installation • Fits XL 650 Press ONLY Primer Rod & Holder (T1562) ………….… $24.95 This Aluminum Primer Rod weighs just enough to “push down” primers for positive feeding! The Holder gives you a handy place to hang the primer rod when filling the primer tube. • Ensures Positive Primer Feed • Primer Count Indicators at 100, 75, 50 & 25 Primers. • Primer Rod Holder Provides a Place to Hang the Rod. • Works with the Dillon Primer Alarm

650 Live Primer Chute - By UniqueTek (T1306) ……. $19.95 Eliminates the “Ski Jump” effect … So No Live Primers end up on the floor! • Higher Sidewalls Retains Primers • Easier to Remove Captured Primers • Direct Replacement for OEM Part Primer Tube Stand (T1567) ………………………………. $19.95 Holds your primer pickup tubes and keeps them ready at hand when you need them! • Holds 12 Primer Tubes — For Dillon, Hornady.

RCBS, Redding and Lyman presses. • Very Stable – Won’t Tip Over • Can Be Disassembled for Storage

Swage It …………..……………………………….............. $129.95 Primer Pocket Swagers for the Dillon 550, 650 and 750 presses. • Fully Resizes Primer Pocket and Adds Correct Fillet • CNC Machined from Aerospace Stainless Steel • Installs in Just Minutes Swage It S550 Swage It S650 Swage It S750 (T1568-5) (T1568-6) (T1568-7)


PRIMER HANDLING (cont’d)

Brass Primer Magazine Tube Ends (T1739) ….…………. $28.95 • Precision Machined Brass • Easy Press Fit Installation • Replaces Large and Small “Flexible Orifice” • No Need to Orient Tip when Installing in System 550/750 Primer Feed Stop (T1742) …………….….…...... $14.95 Temporarily Deactivates Primer Feed Mechanism. • Stops Primer Bar from moving • Takes Just Seconds to Install/Remove • Great for Loading Pre-Primed Brass

Primer System Tag (T1747) ……….…………………….... $16.95 Clips onto Primer Feed System housing and provides a convenient surface on which to note the primer type currently loaded it the primer feed system. • Size: 1" x 3" • Material: Anodized Aluminum • Includes 100 Paper Tags for

Labeling Primer Pick-up Tubes

CASE FEED 650/750 Bearing Camming Pin (T1706) ………..……..... $19.95 Smooths Operation of Case Insert Slide. • Ball Bearing Smooths Operation • Eliminates Wear of Case Insert Slide • Eliminates Need to Lubricate Case Insert Slide • Fits Both XL 650 and XL 750 Presses. 650/750 Case Feed Stop Switch (T1704) ………..……... $32.95 Deactivates Case Feed Mechanism. • Detents for ON and OFF Positions • Takes Just Seconds to Switch w No Tools • Easy Bolt On Installation • Fits Both XL 650 and XL 750 Presses.

1050 550

650

SDB


3


TOOLHEAD

Toolhead Clamp Kit™ For Dillon 550/650/750 Toolheads and RCBS Pro 2000® / Piggyback™ -2 & -4 Dieplates • Eliminates loose toolhead-to-frame fit • Reduces Variation of OAL and Crimp • Stabilizes Die-to-Shellplate Alignment $36.95 – Sm Kit for 6 toolheads and up to 2 presses (T1230-S) $41.95 – Sm Kit with Tap Handle (T1230-SK) $49.95 – Lg Kit for 13 toolheads and up to 5 presses (T1230-L) $54.95 – Lg Kit with Tap Handle (T1230-LK) $14.95 – Refill: 16 inserts, 8 screws, 8 washers (T1230-Refill) $22.95 – Optional HSS Tap (for CNC Aluminum toolheads): (T1230-Tap)

CNC Machined 550/650/750 Toolheads – by Whidden Gunworks • Precision Machined from 6061-T6 Aluminum • Flatter, Truer & Stronger than Original • More Precise Die Positioning & Alignment • Toolhead Clamp Kit™ preinstalled $47.95 – 550 - (T1333-5C) $52.95 – 650 - (T1333-6C)

Floating Die 550/650/750 Toolheads – by Whidden Gunworks • Floating Resize & Seat Dies for Reduced Bullet Runout • Precision CNC Machined from 6061-T6 Aluminum • Toolhead Clamp Kit™ preinstalled! $79.95 – 550 - (T1389-5C) $84.95 – 650 - (T1389-6C)

Toolhead Organizer™ – 550/650/750 (T1629-xx) Stores Dillon 550/650/750 toolheads and caliber conversion kit boxes. Mounts to wall - freeing up bench space. • Delrin Posts won’t Sieze on Tooleheads • Will work with Dillon Toolhead Stands • Heavy Duty 16 GA Aluminum — 3-post (T1629-63) = $109.95 — 5-post (T1629-65) = $171.95 Toolhead Organizer™ – 1050 (T1630-xx) Stores Dillon 1050 toolheads and caliber conversion kit boxes. Mounts to wall - freeing up bench space. • Delrin Posts won’t Sieze on Toolheads • Will work with Dillon Toolhead Stands • Heavy Duty 16 GA Aluminum — 3-post (T1630-103) = $117.95 — 5-post (T1630-105) = $166.95 Powder Measure Stand Adapter (T1573) ....................... $12.95 For the Dillon Powder Measure - NEW Model! • Stores Your Powder Measure on a Toolhead Stand • Fits Dillon RL550/XL650/750 Toolhead Stand (#22055) • Set Screw Locks Adapter onto Toolhead Stand • Durable 6061-T6 Aluminum Toolhead Stand Baseplate (T1754) ……….…………….. $19.95 Adds weight to Dillon Toolhead Stand … making it easier to remove toolhed when stand is not bolted to the bench. • Weight: 1.5 lb • Thickness: 1/4" • Material: 303 Stainless Steel • Fits: Dillon RL 550 / XL 650 / XL 750 Toolhead Stand (#22055)


SHELLPLATE

Shellplate Bearing Kit (T1601) …………..……………… $29.95 Fits BL 550, RL 550, XL 650, XL 750 & SL 900 Presses. • Reduces Shellplate Play & Wobble • Reduces “Snap” when Index Ball Engages,

thus Reducing Powder Loss • Drop-In Installation. No Spring Cutting. • Adjustable Spring Tension XL 750 Ultimate Bearing Kit (T1749) ………….………... $34.95 For Dillon Powder Measures. • Reduces Shellplate Play & Wobble • Reduces “Snap” when Index Ball Engages,

thus Reducing Powder Loss • Drop-In Installation. No Spring Cutting. • Includes Bearings for both the Shellplate and

the XL 750’s new Index Block Assembly Bearing Indexer Block (T1705) …………..……………… $16.95 Fits BL 550, RL 550, XL 650 and SL 900 Presses. • Smooths Operation of Indexer Ring and

Indexing of Shellplate • Eliminates Wear of Indexer Block and Ring Indexer,

Thus Reducing Powder Loss • Eliminated Need to Lubricate Indexer Block. Extended 550 Shellplate Bolt (T1737) ……………….….... $9.95 For Dillon 550 Presses. • 0.2" Longer Than Original Shellplate Bolt • Provides Full Contact for Brass Tip Set Screw • Enables Use of Shellplate Bearings on All 550s

LIGHTING

Light-Load™ II – Shellplate Illuminator (T1731) ……….. $24.95 Illuminates shellplate for easy inspection of reloading process. • Fits center hole of 550/650/750 toolhead • Also fits any 7/8” die hole. • LED: 22 Lumen • Rechargeable LiPo Battery Skylight LED Lighting Kits (T16xx) …………. $33.95 to $38.95 LED lighting system for Dillon reloading presses. • 550 & 650: Mounts in Center Hole of Toolhead • 1050: Mounts in Custom Bracket Attached to Die. • Super Bright but No Heat • AC Powered … So No Batteries to Change • Quick & Easy to Move During Caliber Change

— 550 (T1669) = $33.95 (shown in photo) — 650/750 (T1670) = $38.95 — 1050 (T1671) = $35.95


4


BULLET & CARTRIDGE HANDLING

Loaded Round Counter - By UniqueTek (T1555) …….. $109.95 • Fits Most Dillon Presses … and Many Other Popular Presses • Counts only Successfully Completed Rounds … Not Just Ram Cycles. • Sensor Mounts on Crimp Die • Display Mounts on Primer Tube • Sensor is Easily Moved from — NEW Totalizer (T1555-T) = $39.95 Note: Totalizer is an addon to the Loaded Round Counter and cannot be used separately. XL 650/750 Case Chute Extension (T1590) ………….… $29.95 Use a larger bin to capture loaded rounds! • Attaches to XL 650/750 Chute/Bin Mount • Extends Chute by 6.25" • Load More Ammo Before Emptying Bin • Use Any Convenient Bin to Collect Ammo Note: Press must be on a Strong Mount (not included) The Bin-Dam™ Utilize 100% of Cartridge Case Bin Capacity! • Fits Securely into Label Slot on AkroBins®. • Durable Aluminum • Easy Write-On/Easy Erase Surface – Fits 550/650/750/SDB (4-1/8” wide) Bins: (T1359) = $14.95 (3-pk) – Fits 1050 (5-1/2” wide) Bins: …....... (T1359-1050) = $11.95 (2-pk) The Bullet Bin™ (T1446) …………………………….….… $29.95 An economical alternative to the Dillon Bullet Tray! • Holds MORE Bullets than Dillon Bullet Tray • Attaches to Dillon Strong Mount * • Bullets are Contained in an AkroBin® • Bins are Easily Changed * Fits 550/650 and SDB Strong Mounts without modification. Fits 650 Only Strong Mount but requires drilling two ¼” holes. The Bin-Shelf™ (T1633) NEW! ……………………....…… $29.95 • Supports Weight of Full Cartridge Bin • Prevents Breaking Bin Hanger Lip • Mounts Between Press Frame &

Strong Mount on XL 650 & XL 750 • Heavy Gauge Stainless Steel

MISCELLANEOUS

Foam Grip [2-pk] (T1527) …………………………….…….. $10.95 Fits Dillon Roller Handles! • Cushions Your Hand • Provides Good “Feel” SOLO™ Single Stage Press Conversion Kit For Dillon RL 550B or XL 650/750 Presses • Converts Press for Single Stage Operation • Saves Bench Space & Cost • Conversion is Easy & Fast • No Permanent Press Modifications – For RL 550B Press (T1553-550) = $94.95 – For XL 650/750 Press (T1553-650)= $98.95


DIE WRENCHES

Box End Die Wrench for Dillon Presses (T1532) ……. $30.95 The BEST die wrench for Dillon presses! • CNC Machined 10-18 Steel • Zinc Dichromate Finish • Fits Both 1” & 1-1/8” Die Lock Rings • – Also Works on LEE Precision Progressive Presses

Open-End Die Wrench for Dillon Presses (T1733) ….. $34.95 The BEST die wrench for Dillon presses! • CNC Machined 10-18 Steel • Zinc Dichromate Finish • Fits Both 1” & 1-1/8” Die Lock Rings • – Also Works on LEE Precision Progressive Presses

Die Wrench for Dillon Square Deal B Press (T1604) ... $30.95 The BEST die wrench for Dillon SDB presses! • CNC Machined 10-18 Steel • Zinc Dichromate Finish • 3/4” X 9/16”

DIE ACCESSORIES

Extended Die Lock Nuts (T1745) ….…………………. $19.95/pair Perfect for when you run out of die threads and need to put the die lock nut on the bottom of the toolhead. • 0.155" Extended Shoulder • 12L14 Steel for Strength • Electroless Nickel Plated for SWC/FWC Bullet Seat Stem (T1561-xx) ......................... $14.95 For Dillon Seat Dies • Contacts SWC Bullets at Shoulder • Consistent Alignment & Seating Depth • Fits Dillon “New Dimension” Seat Dies

– .45 cal. (T1561-45) – .38 cal. (T1561-38) – .40 cal. (T1561-40) SWC/FWC Bullet Seat Stem (T1605-xx) ......................... $29.95 For Dillon Square Deal B Seat Dies • Contacts SWC Bullets at Shoulder • Consistent Alignment & Seating Depth • Fits Dillon “New Dimension” Seat Dies

– .45 cal. (T1605-45) – .38 cal. (T1605-38) – .40 cal. (T1605-40)

NEW!


5

ENHANCEMENTS FOR OTHER PRESSES

Loaded Round Counter - By UniqueTek (T1555) …….. $109.95 • Fits Most Dillon Presses … and Many Other Popular Presses • Counts only Successfully Completed Rounds … Not Just Ram Cycles. • Sensor Mounts on Crimp Die • Display Mounts on Primer Tube • Sensor is Easily Moved from

Powder Through Expanders [PTX™] (T1580-xx)…..…… $39.95 Works great on Hornady Lock-N-Load® AP™ press, even if you don't have a Mr. Bulletfeeder. – 9mm/.38 cal. (T1580-01) – 10mm/.40 cal. (T1580-02) – .45 cal. (T1580-03) – .45 HTC – for soft lead/ coated bullets (T1580-04) – NEW! Die Wrench for RCBS Presses (T1560) ……………….. $30.95 The BEST die wrench for RCBS presses! • CNC Machined 10-18 Steel • Zinc Dichromate Finish • Fits Both 1-3/16” & 1-1/8” Die Lock Rings The Bin-Dam™ Utilize 100% of Cartridge Case Bin Capacity! • Fits Securely into Label Slot on AkroBins®. • Durable Aluminum • Easy Write-On Surface – Fits (4-1/8” wide) Bins ………... (T1359) = $14.95 (3-pk) – Fits (5-1/2” wide) Bins: … (T1359-1050) = $11.95 (2-pk) Toolhead Clamp Kit™ For RCBS Pro 2000® / Piggyback™ -2 & -4 Dieplates • Eliminates loose toolhead-to-frame fit • Reduces Variation of OAL and Crimp • Stabilizes Die-to-Shellplate Alignment $36.95 – Small Kit for 6 toolheads and up to 2 presses (T1230-S) $41.95 – Small Kit with Tap Handle (T1230-SK) $49.95 – Large Kit for 13 toolheads and up to 5 presses (T1230-L) $54.95 – Large Kit with Tap Handle (T1230-LK) $14.95 – Refill Kit: 16 inserts, 8 screws, 8 washers (T1230-refill) $ 5.95 – Tap Handle Only: (T1230-K) $22.95 – Optional HSS Tap (for CNC Aluminum toolheads): (T1230-Tap) Single Stage Powder Die Kit (T1702) …..……………… $51.95 Use Dillon style powder funnels on any single stage press. • CNC Machined, Hardened & Nickel Plated • Threaded Cap with Integral Powder Funnel • For Any Press Using Standard 7/8-14 Dies • Also Accepts Dillon Powder Measure Foam Grip [2-pk] (T1527) …………………………….…….. $10.95 Fits Many Roller Handles! • Cushions Your Hand • Provides Good “Feel” • Fits MEC Handles Too!

BRASS RECOVERY

Shell Sorter™ 3-Pan Set (T1356) …………………………... $44.95 Saves time sorting recovered pistol and rifle brass. • 3-Pan Set - Made from strong ABS Plastic • Sorts brass into 3 categories

(.45 cal, .40 cal & 9mm) • Color Coded Pans for easy identification – Optional .380 Auto Sorter Plate (T1356-380) = $22.95 – Optional .38 Super Auto Sorter Plate (T1356-38SA) = $24.95 Mr. Shooter’s Brass Marker (T1515-A) …………………. $79.95 Quickly Stripe your Brass for Easy Identification. • A Stripe 20 Rounds per Minute • Applies 2 Stripes • Uses 2 Sharpie Permanent Markers • 9V Battery Lasts > 5000 Rounds Mr. Shooter’s Manual Brass Marker (T1515-M) …..…… $17.95 Quickly Stripe your Brass for Easy Identification. • Compact & Light Weight • Fits in Your Range Bag • Applies 1 Stripe • Uses 1 Sharpie Permanent Marker Component Recovery Cup (T1668) …………………...... $14.95 Separates gunpowder from bullet and case after using a bullet puller. • Fits on Top of Powder Measure • Holes in Bottom Drains Gunpowder Directly into Powder Measure Hopper for Immediate Reuse. • Separates Bullets as Small as .22 cal. • Tapered Shape Fits on Powder Hoppers of Many Sizes. • NEW! – Now with Laser Cut Holes!


6

SCALES & MEASURING TOOLS

Enhanced Electronic Powder Scale (T1391) …………... $99.95 • 308 grain Capacity / 0.05 grain Accuracy • 2 Interchangeable Clear Flip-Up Covers • Scale Size: 3” x 4.75” / Tray Size: 1.5” dia. • Powered by 3 AAA Batteries (included) • RCBS Powder Pan/Funnel Included FREE Digital Calipers (T1236) ………..……………………….... $34.95 • Large LCD Display • Stainless Steel • 6”/150mm Range • Four-Way Measurements • Auto OFF after 5 Minutes • Instant Inch/Metric Conversion CTS-30000 Precision Counting Scale (T1445) ………. $244.95 Advanced Counting Features and 30Kg (66Lb) capacity let you accurately count bins full of brass, bullets or loaded ammunition. • Capacity: 66.078 lb (30 Kg) • Resolution: 0.001 lb (0.5g) • Units: Kilogram, Gram, Pound, Ounce • Scale Size: 13" x 12.5" x 4.9" • 5/8” Tall LCD Displays with Green Backlight • 9V NiMH Rechargeable Battery (AC Charger/Power Adapter included)

CASE PREPARATION

Ammo-Burr Inside Debur/Chamfer Tool (T1722) .....…. $44.95 • Removes Burrs • Chamfers Case Mouth • 45 Degree Angle • Industrial Quality HSS Cutter • 8-32 Prep Station Adapter Included - FREE – Replacement Bit: (T1728) $25.95 Ammo-Burr Outside Deburr/Chamfer Tool (T1723) ….. $64.95 • Removes Burrs • Chamfers Case Mouth • 45 Degree Angle • Industrial Quality HSS Cutter • 8-32 Prep Station Adapter Included - FREE – Replacement Bit: (T1727) $48.95 Purple Metal Polish (T1757) ………….…………………... $14.95 Specially formulated for fast cleaning and high shine on most metals including cartridge brass. • Cleans 25% Faster * • Yields a Higher Shine * • Sealers Retard Tarnishing • Contains No Ammonia • Contains No Silicones (12 fl oz bottle) * Compared to Dillon Rapid Polish Quick-Release Case Cleaner Knob (T1750) …………... $12.95 For Dillon Powder Measures. • Quick-Release or Fast On / Fast Off Action • Durable Brass Threaded Insert • Works on most Vibratory Case Cleaners • Available Sizes: 1/4"-20, 5/16-18 and 3/8-16

CASE GAUGES

Pistol Caliber Case Gauges …………………………...… $29.95 • CNC Machined to SAAMI Min. Chamber Specs. • Patented Tri-Step Face Design • Stainless Steel – .32 ACP (T1557) – .357 Magnum (T1574-09) – .32 S&W Long (T1574-22) – .40 S&W (T1574-04) – 9x18 Makarov (T1574-07) – .44-40 Win. (T1574-08) – 9mm (T1574-01) – .45 ACP (T1574-05) – .38 Super Auto (T1574-02) – .45 Long Colt (T1574-06) – .38 Special (T1574-03) – .30 Carbine (T1574-16)

Rifle Caliber Case Gauges ………………………………. $34.95 • CNC Machined to SAAMI Min. Chamber Specs. • Red Anodized 6061-T6 Aluminum – .22-250 Rem. (T1574-20) – .300 Blackout (T1574-13) – .223 Rem. (T1574-10) – .308 Win. (T1574-12) – .224 Valkyrie (T1574-17) – 7.62X39mm (T1574-11) – 6.5 Creedmoor (T1574-21)

Shotshell Case Gauges …………………………………... $29.95 • CNC Machined to SAAMI Min. Chamber Specs. • 6061-T6 Aluminum – 12GA 2-3/4" (T1574-14) – 28GA 2-3/4" (T1574-15)

Reload Checker (T1554) ………….................................. $19.95 By UniqueTek • CNC Machined for Precision • SAAMI Min. Chamber Specs. • Stainless Steel for Durability & Stability • Checks both 45 ACP and .38 Spl/.357 Mag.

SWAGE GAUGE Primer Pocket Gauge ….……………. $14.95 Go/No-Go Gauge for Primer Pockets • Primer Pocket Depth • Primer Pocket Diameter • Available for: – Small Primers (T1521-S) – Large Primers (T1521-L)

Case Mouth & Neck Tension Gauge (T1522) ….………. $14.95 Will not distort the round shape of the mouth like calipers can. • For .224 dia. & .308/.310 dia. Case Mouths • Works on .223 Rem., 5.56 NATO, 7.62 NATO, .308, .30-06, 7.62x39 and many more.

SPECIALTY RELOADING DIES & ADAPTERS

ARIES Powder Ram™- Powder Compression Die …… $44.95 – By UniqueTek, Inc. Compress powder before bullet seating, thus preventing bullet distortion and accuracy loss. • Screw Adjustable Compression • Standard 7/8-14 Die Body – Rifle: .224, .243, .264, .284, .308, .38 & .45: (T1308-xxxR) – Pistol: 45 cal. (ACP, & Colt): (T1308-xxxP) Stuck Case Remover Kit (T1663) ….……………………. $27.95 By UniqueTek, Inc. • Installs on Press Ram … Just like a Shellholder • Uses the Power of Your Press to Remove Stuck Case • Works on Any Single-Stage Press LEE Universal Case Expanding Die (T1308-01) ….…….$16.95 By LEE Precision, Inc. • Flares Case Mouth • .22 Caliber through .45 Caliber • Case Lengths up to 3" • Threaded Cap allows Easy Fine Adjustment

NEW!


7

SHOOTING RANGE & TARGET ACCESSORIES

TARGET STANDS

Port-A-Stand™ 'V' Portable Target Stand (T1426-V) …. $69.95 By UniqueTek, Inc. Folds to easily fit in trunk or back seat. • Sets Up and Takes Down in just Seconds! • 18” Width for USPSA/IDPA/NRA D-1 Targets • 4.9 lb for Stability & Wind Resistance • Corrosion Resistant Finish • Uses 1”x2” Furring Strips • Target Pockets are Free Draining • 3 Tent Stake Holes Port-A-Stand™ 'H' Portable Target Stand (T1426-H) … $69.95 By UniqueTek, Inc. Folds to easily fit in trunk or back seat. • Sets Up and Takes Down in just Seconds! • 18” Width for USPSA/IDPA/NRA D-1 Targets • 8.2 lb for Stability & Wind Resistance • Corrosion Resistant Finish • Uses 1”x2” Furring Strips • Target Pockets are Free Draining • 4 Tent Stake Holes Port-A-Stand™ 'C' Portable Target Stand (T1426-C) … $69.95 By UniqueTek, Inc. Folds to easily fit in trunk or back seat. • Sets Up and Takes Down in just Seconds! • 18” Width: USPSA/IDPA/NRA D-1 Targets • 24” Width: NRA B-27 & B-34 Targets • 7.5 lb for Stability & Wind Resistance • Corrosion Resistant Finish • Uses 1”x2” Furring Strips • 4 Tent Stake Holes Port-A-Stand™ 'Bracket' (T1426-B) ……….………. $34.95 pair By UniqueTek, Inc. The ultimate portable target stand! • Light Weight: Just 1.85 lb per pair! • Super Compact: Fit Multiple Pairs in a Box. • Sets Up and Takes Down in just Seconds! • Uses 1”x2” Furring Strips • Corrosion Resistant Finish

SHOOTING RANGE & TARGET ACCESSORIES

TARGETS

Sure Site® Clay Target Hangers Attach to clay pigeons for easy hanging from 3/8” rope, tree branches, etc. • Fits Most Clay Pigeon Targets including; • American Trap & Skeet • International Targets • Plus Midi & Mini Targets

• Thin profile (1/16” thick) makes them less likely to be struck by a bullet. — 20 Count bag: (T1317-20) Black / (T1317-20Y) Yellow …………..…. $14.95 — 100 Count bag (T1317-100) Black / (T1317-100Y) Yellow ……….…. $59.95 — 1000 Count box (T1317-1000) Black / (T1317-1000Y) Yellow ……. $499.95


8

GUN STORAGE ACCESSORIES

Rifle Rods by Gun Storage Solutions Expand the capacity of your gun safe and reduce the risk of damage to your guns. – 10-Rod Kit (T1327-10) = $39.95 – 20-Rod Kit (T1327-20) = $74.95 – 40-Rod Kit (T1327-40) = $139.95 – Extra Rifle Rods (6-pk) (T1327-6) = $17.95 – .17cal. Rods (2-pk) (T1327-17)= $9.95 Handgun Hangers by Gun Storage Solutions (T1328-4) ..... $19.95 Hangs handguns under the shelf, freeing up more shelf space in your gun safe. (4-pack) • Fits Shelves 5/8” to 1” Thick • Fits Hanguns .22 cal. & Larger • Vinyl Finish Won’t Rust or Scratch Bore Carry Optics Handgun Hangers (T1328-2) .................... $10.95 Hangs handguns under the shelf, freeing up more shelf space in your gun safe. (2-pack) • NEW 1-3/4" Drop Accommodates Carry Optics • Fits Shelves 5/8” to 7/8” Thick • Fits Hanguns .22 cal. & Larger • Vinyl Finish Won’t Rust or Scratch Bore

Mag Mount by Gun Storage Solutions (T1468) …………….... $9.95 Magnetically holds magazines anywhere you have extra space in your gun safe … on the door, wall or under a shelf. • Large 3” x 10” Magnetic Surface • Holds Most Metal Magazines • Installs on ANY Surface, Not Just Metal MagMinder by Gun Storage Solutions (T1623) ……………... $16.95 Magnetically holds magazines anywhere you have extra space in your gun safe … on the door, wall or under a shelf. • Large 3” x 10” Magnetic Surface • Holds Most Metal Magazines • Installs on ANY Surface, Not Just Metal Modular 6 Gun Pistol Rack by HySkore (T1534-6) ……. $28.95 • Soft EVA Foam Will Not Scratch Gun Finishes • Guns are Separated and Protected • Will Not Absorb Moisture or React to Gun Oils • Can be Reconfigured to the Width of Each Gun • Multiple Racks can be Linked Together Click-Box Storage Case (T1755-1) ………………………... $9.95 By UniqueTek, Inc. The same handy box as used for our Blank/Starter Pistol Cleaning Kit (featured. It is roomy enough For some compact & subcompact pistols! • External: 7.8" x 5.1" x 1.5" • Internal: 7.3" x 4.4" x 1.4" • Secure “CLICK” Latch • Material: Polypropylene • Color: Natural – Individual (T1755-1) = $9.95 – 3-Pack (T1755-3) = $16.95

GUN STORAGE ACCESSORIES (cont’d.)

MAGnet Gun Caddy™ (T1467) ....................................... $10.95 Holds just about any long barrel gun upright against your vehicle, gun safe, or metal surface. • .410 Bore through 10 Gauge Shotguns • Double or Over/Under Barrels • Also Fits Most Rifles & Fishing Poles • Soft High-Energy Magnet Won’t Scratch Finishes • Soft Foam Will Not Scratch Barrel HygroSet™ Digital Hygrometer (T1324) ......................... $34.95 Monitors humidity in a gun safe, at a reloading bench, or in a storage area for powder, primers and loaded ammo. • RH Accuracy: ±2% / Range: 20% to 90% RH • Temp. Accuracy: ±1° (F or C) / Range: -4 to 122°F • LCD Display: 0.5” Tall Digits • Size: 2.4” W x 1.9” H x 0.6” Thick Eva-Dry™ Renewable Mini-Dehumidifier (T1330) .......... $24.95 Absorbs moisture from gun safes, storage cabinets, or any small enclosed area. • Absorbs 4-6 ounces of water • Services up to 333 cubic ft. area • Plug into any wall outlet to recondition Activated Carbon Gun Safe Bags by UniqueTek (T1759)..$14.95 Adsorbs VOCs emanating from the guns in your gun safe. • Activated Carbon from Coconut Shells, 150g/ bag • Tyvek® Bags are Dust Free & Spill-Proof • Each Bag Lasts 1 Year in Most Gun Safes – 2 Individually Sealed Bags per Pack Armor Shield CF33 VCI Emitter (2-pk) (T1685) ……..….. $14.95 Emits corrosion inhibiting vapors that attach to metal surfaces and form an invisible barrier to corrosion. • Just 3.5" x 4" x 1/4" • Covers 17-33 Cubic Feet (Enclosed Space) • Protects 12 to 24 Months • Clean, Safe and Easy!

SECURITY GUN LOCK BOXES

Travel Gun Vault - Small (T1699-S) ................................ $31.95 Secure your firearm when traveling or at home. • 9.5" X 6.5" x 1.75" (outside dimensions) • 16 Gauge Steel • High Security Lock with Laser Cut Key • Locking Tabs: 1 • 39" Security Cable Included • Weight: 2 lb 14 oz Travel Gun Vault - Medium (T1699-M) ............. .. $59.95 Secure your firearm when traveling or at home. • 10.5" X 7.5" x 2.18" (outside dimensions) • 14 Gauge Steel • High Security Lock with Laser Cut Key • Locking Tabs: 2 • 39" Security Cable Included • Weight: 5 lb 2 oz

Rifle Rods

Handgun Hangers

NEW!

NEW!


9

COWBOY ACTION SHOOTING PRODUCTS

Marlin Spring Kit (T1337) …………………………………. $21.95 By Palo Verde Gunworks Reduces spring tension of Marlin rifle action. Gives a lighter, smoother action & slightly lighter trigger pull. • Fits Marlin Lever Action Rifles • Models: 1984, 1985, 336, 444 and 39A. • Adjustable to 7 Levels of Spring Tension

Rossi ‘92 Spring Kit (T1434) ……………………………… $29.95 By Palo Verde Gunworks Reduces spring tension of Rossi rifle action. Gives a lighter, smoother action & slightly lighter trigger pull. • Fits Rossi ‘92s in .38/.357, .44-40, .44 Mag. & .45 Colt • Includes 2 Ejector Springs for Fine Tuning. • Adjustable to 5 Levels of Spring Tension

Stoeger Top Lever Spring Kit (T1552) ……………….… $17.95 By Palo Verde Gunworks Gives a lighter and smoother feeling top lever action and makes your shotgun easier and quicker to open. • Fits Stoeger Coach and Uplander Side-by-Side Shotguns • Adjustable to 7 Levels of Spring Tension Winchester Model ‘97 6-Round Conversion ................ $39.95 By Wild Bodie Tom Allows for a full 6 rounds in a Model ‘97 mag tube. – Kit contains: 1 Magazine Spring and 1 Follower – Solid Frame (T1413-S) – Take-Down Frame (T1413-T) Shotshell Case Gauges (T1574-xx) ................................ $29.95 By The Shooters Box • Gauges Full Length of Shotshell • Gauges Length Loaded and Unloaded Hulls • For 2-3/4” Shotshells. • CNC Machined to SAAMI Chamber Specs. – Available in: 12 GA ... (T1574-14) 28 GA ... (T1574-15) SliX Shotshell Checker/Sizer Combo (T1715-02) ……. $44.95 By SliX-Prings • CNC Machined for Precision • SAAMI Min. Chamber Specs. • Stainless Steel for Durability & Stability • Checks both 45 ACP and .38 Spl/.357 Mag.

Lever Lock (T1712) .......................................................... $89.95 Prevents unintentional opening of action before thigger is pulled. Prevents live round from being ejected and deminshes chances of out of battery discharge. • Fits both 1873 and 1866 Uberti Rifles • Easy Installation with Minor Fitting • Adjustable for Trigger or Hammer Activation • SASS Approved! QuikLoader (T1761) ……….……………………………...…… $79.95 Puts a 3° taper on the leading 1/2" of 12GA shotshells for easier feeding in Dbl-Barrel Side-by-Side and Over/Under Shotguns. Included: – QuikLoader Sizing/Taper Die (VerB) – Spacer & Spacer Washers – 1" and 1-1/4" Knurled Thumbscrews – Detailed Instructions – Fits MEC Jr, MEC Sizemaster and many other presses

COWBOY ACTION SHOOTING PRODUCTS (cont’d)

Dry-Fire Practice Snap Caps By Palo Verde Gunworks The best for meaningful dry fire practice. • Available in .38 Special, 45 Colt and 12 GA • .38 & .45 — Brass Case with Lead Bullet • 12 GA — Real Shothull / Simulates Empty Hull • Rubber “Primer” Protects Firing Mechanism – Complete Rim – Will Eject From Rifle …….. (T1451) $9.95/2-pk – Machined Rim – Will NOT Eject From Rifle.. (T1452) $19.95/2-pk – 12 GA Shotshell – Simulates Empty Hull …. (T1456) $22.95/4-pk 12 GA Shotgun Chamber Brush (T1286) .……………… $17.95 • Effectively Cleans Crud from Shotgun Chamber & Forcing Cone • Use Dry or With your favorite Gun Cleaning Solvent

66/73 Rifle Magazine Tube End Cap Wrench (T1380) ... $19.95 Securely engages slot on Winchester Model 1866 and 1873 rifle magazine tube end caps.

• 2 Blades at 90° Angle to each other • 1/4" Thich 303 Stainless Steel • Square profile blades won’t slip out of slot like conventional screwdrivers. 66/73 Magazine Tube Plug (T1700) ……………………... $19.95 • CNC Machined Aluminum • Black Anodized Finish • 3/16" Hex Socket • 3/16" Hex Wrench Included Custom Leather Lever Wrap (T1563-x) …………………. $39.95 By Palo Verde Gunworks Cushions your fingers making cocking the lever easier, smoother and less painful. • Special Four-Piece Leather Construction • Wide and Flat to Match and Cushion Fingers • Does not Slide, Twist or Turn. • Kit Includes: Leather Lever Wrap, Lacing,

2 Lacing Needles and Instructions on DVD. Available for the Following Lever-Action Rifles: – 1873 and 1866 Winchester & Uberti, 1860 Henry: (T1563-1) – 1894, 444 and 336 Marlin: T1563-2) – 1892 Winchester, Rossi, EMF, Braztech, Uberti, Puma & Chiapa 92: (T1563-3) – 94 Winchester and reproductions: (T1563-4) – Henry Big Boy and Henry .30-30 & .45-70: (T1563-5) – NEW! Front Sight Polish Kit (T1559) ……………………..……. $9.95 By Palo Verde Gunworks The Shines your front sight to make more visible in dim light. • Works on Bare Metal Front Sights Including:

Brass, Silver and all Polished or White Sights. • Kit lasts for Many Years • Kit Includes: – 1 Leather Faced Polishing Stick (Double Sided) – 0.3oz Polishing Compound SpringKeeper© - Loading Gate Spring Tool (T1664) …. $24.95 By Armorer’s Edge Secures Gate Spring of Vacquero & Blackhawk pistols, making for easy removal & replacement of bolt’s pin. • Compresses and Holds Gate Spring • Protects Firearm Finish • Large Brass Thumb Screw for Easy Turning • Makes Cleaning/Servicing Firearm Easy!

NEW!


10

RUGER® 10/22® ACCESSORIES

10/22 Extended Mag Release – By Ranch Products Makes changing magazines easier and faster! • Drop-in Fit requires No Gunsmithing. • Investment Casting yields Strength and Accurate Dimensions. – Available in: Black Steel ……… (T1402-B) = $12.95 Stainless Steel …. (T1402-S) = $15.95

LULA™ Loader/Unloader Set for 10/22® (T1684) …………. $35.95 Loads .22LR ammo into original Ruger® mags. • Never Jams • Will Not Dent .22LR Cases • Will Not Loosen Bullet Crimp • Never Marks the Bullet Tip • Painless & Quick Loading • Pocket Size

Double Kross – Double 10/22® Mag Body (T1687 2-pk) .. $19.95 Loads .22LR ammo into original Ruger® mags. • No Couplers Needed • Clear Body Lets Your Count Rounds • Lightweight & Compact • Retains the Reliability of Factory

BX-1 10 Round Magazine • Each Body Requires Internal Parts from 2 BX-1 Magazines

10/22® Mag Assembly Tool Kit (T1688) ……………….…. $19.95 Aids Disassembly/Assembly of Ruger® magazines • Makes Mag Maintenance Easy • Works on All BX-1 Mags • Durable Glass Filled Nylon and Metal Tools • Carry Case Included

Fireswitch Extended Mag Release (T1693-B) …………. $44.95 Stop struggling with Ruger® 10/22® mag changes! • Extended Lever for Fast Easy Mag Changes • Dual Action Release: Push or Pull to Release Mag. • Fits Ruger® 10/22®, Takedown® & 22 Charger™. – Available in: Black Only

“GUARDIAN” Bolt Release Plate for 10/22® (T1691) ….. $10.95 Loads .22LR ammo into original Ruger® mags. • Allows Simple & Automatic Release

Of Bolt Mechanism • More Ergonomic & Intuitive • Drop-in Part: Easy to Install • Black Oxide Finish for Durability

“KrossFire” CNC Macnined Bolt for 10/22® (T1692) ……... $119.95 Aids Disassembly/Assembly of Ruger® magazines • CNC Machined and Hardened Tool Steel • Polished Surfaces Ride Smoothly Over

Hammer for Improved Cycling • Firing Ping & Extractor are Included • Drop-In Part for Easy Installation • Fits Most Ruger® 10/22® Rifles.

“Advantage” Charging Handle & Picatinny Mount (T1689).. $69.95 Great for both competitors and sport shooters! • Allows Left and Right Handed Charging/Clearing • Clear Jams Without Breaking from Position • Picatinny Rail - Mounts Virtually Any Optic • No Gunsmithing Required (Screws Included) • Fits Any Standard Ruger® 10/22® or Charger™.

Performance V-Block for 10/22® (T1690) ……………….…. $24.95 Increased stiffnes and rigidity of 10/22® barrel. • Solid Stainless Steel • Eliminates “Barrel Droop” • More Durable than Aluminum V-Blocks

RUGER® MARK I/II/III/IV ACCESSORIES

Mk-II Extended Mag Release - By Ranch Products (T1401)..$9.95 Easier and faster magazine changes, even with oversized target grips on Mk-I & Mk-II pistols. • Drop-in Fit requires No Gunsmithing. • Investment Casting yields Strength & Accurate Dimensions. – Available in: Black Steel ……. (T1401-B) = $9.95 Stainless Steel ... (T1401-S) = $12.95

Thumb Saver™ – .22 LR Mag Loader (T1299-01) ………... $10.95 • Ruger MK I, MK II, MK III & 22/45 • Browning Buckmark & Challenger III • Colt Woodsman & Huntsman • AMT Lightning • S&W 22A & 22S • Beretta U22 Neos

RUGER® Mini-14® ACCESSORIES

THERMOLD™ Magazine Charger (T1313-K) ………………... $9.95 Load .223 cal. / 5.56mm ammo on stripper clips into AR15/M16 magazines. • Fits ALL AR15/M16 Metal or Plastic Mags • Durable Zytel® Nylon • Also Loads Loose Rounds • Works with THERMOLD™, GECO & GI Stripper Clips • Includes 10 THERMOLD™ Stripper Clips! THERMOLD .223 Stripper Clips For .223/5.56mm rifle cartridges. Zytel® Nylon — 25 clips per pack ……... (T1313-25) = $9.95 — 100 clips per pack ……. (T1313-100) = $34.95 — 1000 clips per pack …. (T1313-1000) = $289.95 Stripper Clip Loading Block (T1701) ................................. $29.95 Quickly load .223/5.56 ammo onto stripper clips. • Holds 10 rds in Perfect Alignment • Works with all .223/5.56 Stripper Clips

(e.g. USGI, Thermold, RUAG/GECO) • CNC Machined from Solid Aluminum. • Compact, Light Weight and Easy to Carry Threaded Barrel Adapter (T1732) ………………………….. $39.95 • Replaces Front Sight • Fits Ruger .562" Barrels III • CNC Machined Stainless Steel • Thread Protector Cap for Sleek Appearance with no Device is Attached


11

GLOCK ACCESSORIES

Extended Take Down – by Ranch Products Makes disassembly of Glock firearms easier. • Fits all GLOCK Models. – Available in: Black (T1400-B) = $9.95 Nickel (T1400-N) = $12.95

Optic Mount for Glock – by The Shooters Box (T1597) …. $69.95 • Simply Replaces Rear Sight. • Low Profile Keeps Red Dot Low • Black Cerakote Finish • Fits All Glock Pistols

Recoil Buffer – by Buffer Technologies (T1748-06) [2-pk]….. $24.95 Eliminates slide-to-frame impact for reduced felt recoil, enhanced muzzle control and longer service life. • Fits: 17, 17L, 18, 19, 20, 21, 22, 23, 24, 24C, 31, 32 & 37.

PARDINI ACCESSORIES

Target Compensator – for Pardini Pistols (T1514-xx) ……. $99.95 An effective Recoil Compensator for Pardini pistols. • 6061-T6 Aluminum w Black Cerakote Finish * • Works with Original Internal Weights & adds Only 0.5oz – .22 cal. - SP/SP Rapid Fire & SP1/SP1 Rapid Fire (T1514-1) – .32 cal. - HP/HPE (Electronic Trigger) .32 cal, (T1514-2) * Shown in bare aluminum finish for photographic clarity. .32 ACP Case Gauge (T1557) ........................................ $29.95 By The Shooter’s Box • CNC Machined for Precision • SAAMI Min. Chamber Specs. • Stainless Steel for Durability & Stability Pardini Thumb Saver™ – Mag Loader (T1299-02) ………. $19.95 By UniqueTek • Protects Your Thumb • Allows Quick & Easy Loading • Ambidextrous • Fits Pardini .22 LR Magazines for SP/ SP RF & SP1/SP1 RF

PISTOL MAGAZINE LOADER ACCESSORIES

UpLULA™ Magazine Loader/Unloader (T1292) ….……. $34.95 • Loads .45, .40, 10mm, .357 and 9mm mags. • Works with both Double and Single-Stack mags, • No Inserts, Spacers or Adjustments Needed • Fast, Safe, Comfortable and Painless.

22UpLULA™ Magazine Loader/Unloader (T1602) ……. $34.95 • Loads .22LR Wide Body mags. > 1/2" • 1911 and other .22LR Conversion Mags, • No Inserts, Spacers or Adjustments Needed • Fast, Safe, Comfortable and Painless.

1911AI Aligner Insert (T1603) ……………………………. $17.95 • An Optional Accessory for UpLULA or 22UpLULA • Stabilizes Single-Stack Mags during Loading • Attaches to Bottom of LULA. • Easily Removed for Double-Stack Mags

Thumb Saver™ – .22 LR Mag Loader (T1299-01) ….…….. $10.95 • Ruger MK I, MK II, MK III & 22/45 • Browning Buckmark & Challenger III • Colt Woodsman & Huntsman • AMT Lightning • S&W 22A & 22S • Beretta U22 Neos

Pardini Thumb Saver™ – Mag Loader (T1299-02) ………. $19.95 By UniqueTek • Protects Your Thumb • Allows Quick & Easy Loading • Light Weight: Only 6 g (0.22oz) • Fits Pardini .22 LR Magazines: – SP and SP RF – SP1 and SP1 RF

RECOIL BUFFERS

Recoil Buffers – by Buffer Technologies Eliminates slide-to-frame impact. Reduces felt recoil. – 1911 Autos (T1748-02): $8.95/4-pk – Glock (T1748-06): $24.95/2-pk – CZ-75, 85 (T1748-01): $24.95/2-pk – S&W (T1748-08): $25.95/2-pk – S&W Model 41 (T1748-10): $24.95/4-pk – Browning Hi-Power (T1478-09): $25.95/4-pk – Ruger 10/22 Bolt Buffer (T1748-07): $19.95/2-pk – SKS Buffer (T1748-05): $25.95/2-pk – Ruger Mini-14/30 Buffer (T1748-03): $14.95/ea


12

REVOLVER MOON CLIPS & TOOLS

Moon Clip Extractor Tool – by Ranch Products (T1403) ...... $4.95 • Works with All Calibers and All Moon Clips • Can Demoon a single 1 round • Demoons 1/2 moon, 1/3 moon and full moon clips that hold and odd number of rounds. Golf Club Demooner Tool - by Ultimate Accessories ……. $10.95 Hand made from recycled golf club shafts by Dan Furbee.

• Easy and Fast to Use • Demoons 1 Round at a Time. • Captures and Stores Demooned Rounds Inside Handle. – Available for: .45 … (T1420-.45) .40/10mm … (T1420-.40) .38 … (T1420-.38) 9mm ………. (T1420-9mm) Moon Clips – by Ranch Products (T1419-xx) † • Durable Spring Steel with Black Finish • Available for Many Popular Revolvers • Calibers: 9mm, .38 Cal., 40 cal. and .45 cal. † See our web site, or call, for available types, part numbers & prices.

Moon Clip Checkers (T1708-xx) ………………………….… $39.95 Checks Loaded Moon Clips! • Safer Than Using Your Revolver • Can be Used at Range Away from a Safety Table • Precision CNC Machined to Cylinder Dimensions and SAAMI Chamber Dimensions. – Available For: S&W 625, 610, 627, 929 & 986 ✔ The 929 checker also works with Ruger Super GP100 9mm 8-shot. Moon Clip Flatness Plate (T1711) …….….……….……….. $19.95 Checks Loaded Moon Clips! • Safer Than Using Your Revolver • Can be Used at Range Away from a Safety Table • Precision CNC Machined to Cylinder Dimensions . and SAAMI Chamber Dimensions – Available For: S&W 625, 610, 627, 929 & 986

CARTRIDGE & CALIBER ADAPTERS

12GA to 22LR Shotgun Adapter (T1698-01) …..…….…. $25.95 Fire 22LR Ammo from your 12Ga Shotgun! • Fits any Single, Barrel, Over/Under or Side-by-Side Break Action Shotgun • Uses 22 Short, Long and Long Rifle Ammo. • Fits Both 2-3/4" and 3" Chambers • Solid Stainless Steel with Smooth Bore – Sold Individually 12GA to .357 Magnum Shotgun Adapter (T1698-03) …. $25.95 Fire 22LR Ammo from your 12Ga Shotgun! • Fits any Single, Barrel, Over/Under or Side-by-Side Break Action Shotgun • Uses 22 Short, Long and Long Rifle Ammo. • Fits Both 2-3/4" and 3" Chambers • Solid Stainless Steel with Smooth Bore – Sold Individually 45LC to 22LR Cartridge Adapters (T1698-04x) Fire 22LR Ammo from your 12Ga Shotgun! • Fits Revolvers Chambered for .45 Colt, . 454 Casull and .460 S&W Magnum • Uses 22 LR, 22 L & 22 S Ammo. • Fits Single Action and Double Action Revolvers • Fits Break-Action & Single Shot Derringers – 6-Pack = $79.95 – 2-Pack = $34.95

NEW!


13

AR-15 ACCESSORIES

THERMOLD™ Magazine Charger (T1313-K) ………………... $9.95 Load .223 cal. / 5.56mm ammo on stripper clips into AR15/M16 magazines. • Fits ALL AR15/M16 Metal or Plastic Mags • Durable Zytel® Nylon • Also Loads Loose Rounds • Works with THERMOLD™, GECO & GI Stripper Clips • Includes 10 THERMOLD™ Stripper Clips! THERMOLD .223 Stripper Clips For .223/5.56mm rifle cartridges. Zytel® Nylon — 25 clips per pack ……... (T1313-25) = $9.95 — 100 clips per pack ……. (T1313-100) = $34.95 — 1000 clips per pack …. (T1313-1000) = $289.95 Stripper Clip Loading Block (T1701) ................................. $29.95 Quickly load .223/5.56 ammo onto stripper clips. • Holds 10 rds in Perfect Alignment • Works with all .223/5.56 Stripper Clips

(e.g. USGI, Thermold, RUAG/GECO) • CNC Machined from Solid Aluminum. • Compact, Light Weight and Easy to Carry √ Also works with .300 AAC Blackout! Original Bob Sled™- Single Shot Loading Accessory Allows loading of single rounds during competition, at the benchrest, or out varmint shooting. – 10rd “Match Rifle” (T1354-01) = $49.95 – 20rd “Service Rifle” (T1354-02) = $49.95 – 10rd 6mm-15 (T1354-03) = $49.95 – SR/LR 308 “Match Rifle” (T1354-04) = $59.95 – SR/LR 308 “Service Rifle” (T1354-05) = $64.95 – For Bolt Rifles using A.I. 308 Mags (T1354-06) = $49.95 – CZ-527 7.62x39 & 5.6 Grendel (T1354-07) = $39.95 – CZ-527 22 Hornet, 221 Fireball, 222 Rem. (T1354-08) = $39.95 – CZ-527 204 Ruger, 223 Rem, 17 Rem. (T1354-09) = $39.95 AR-15 Bolt Release Lever (T1355) ……………… $29.95 Release Bolt Catch without reaching over receiver. • Great for Match Rifle, Space Guns and Varmint Shooting • Great for Side Cocking Uppers! • Perfect companion for use with the Original Bob Sled. Automatic Casing Catcher (T1767) ……………...………... $49.95 Catches ejected brass from AR Rifles. Dumps Brass automatically when you change mags. • Attaches to Magwell • Leaves Picatinny Rails Free for Scopes, etc. • Holds up to 40 .223 Remington Cases • Injection Molded from Durable Plastic • Fits all Mil-Spec Lowers

MORE AR-15 PRODUCTS ON NEXT PAGE

AR-15 TOOLS

AR-15 Bolt Catch Pin Punch (T1368) ……………….….. $19.95 Specially designed for removing AR-15 bolt catch pin. • Flat Side Clears Mag. Well • Point Engages Center of Roll Pin AR-15 PUSHTOOL™ by Sporting Conversions, Inc. ………... $10.95 The best tool available for removing AR push pins. Bench Model ……. (T1289-BM) Key Ring Model … (T1289-KR)

MAGCATCH™ TOOL by Sporting Conversions, Inc. (T1290) $10.95 A tool designed specially to aid in removal and installation of the AR-15 magazine catch. GBA Gas Block Aligner - By HB Industries (T1511-xx) ………... $9.95 Ensures perfect alignment between gas port hole in AR barrel and gas block! Fast and Easy to Use! • Works with any 3/4" ID Gas Block • 6 Pin Diameters Fit Various Gas Port Diameters • For Low Profile, Adjustable, Railed, Flip-up Sight Blocs. – .22 Caliber (T1511-22) – .30 Caliber (T1511-30) OST Carbon Scraper (T1768) ……………...………………... $19.95 Scrapes carbon from AR Rifles BCG Surfaces. • Cleans Multiple BCG Surfaces • A Pick Aids Disassembly & Cleaning

Under Extractor • Precision Ground Stainless Steel • Black Nitride Finish • Weighs Just 0.78 Ounces (22g) • Stores Easily on a MOLLE Loop • .223/5.56mm/300 Blackout ARs

AR-15 PARTS

AR Emergency Repair Kit - By Specialized Dynamics (T1423) .. $19.95 The 6 most frequently lost or broken AR parts! – Enhanced Extractor Spring – Take Down Detent and Spring – Firing Pin Retaining Pin – Buffer Retaining Pin and Spring – Hammer/Trigger Pin – Set of 3 Gas Rings for Gas Impingement Rifles

ADIGS Gas System – by Sharps Rifle Company (T1600) ... $59.95 An Adjustable Gas Key for AR Rifles! • Fits Any AR15/AR10 Bolt Carrier • Adjust for Overgassed Rifles, • Finer Adjustment than Gas Blocks • Easy To Adjust – In the Field!!!

Deflector Brake Kit (T1686) …………………………...….. $15.95 Reduces unpredictable ricochet of brass off AR rifle brass deflector. • Deflects Brass Forward and Away

from Shooter and Range Officer • Reduces Speed and Distance Brass

Travels by 60% • Protects Receiver Finish from Wear • Minimizes Damage to Brass Cases

Threaded Barrel Adapter (T1717) .................................. $10.95 Great for Attaching 5/8"-24 threaded Flash Hiders, Muzzel Brakes, Supressors, etc to your AR Rifle Barrel. • Converts from 1/2"-14 Threads to 5/8"-24 Threads • Stainless Steel for Durability & Heat Resistance • CNC Machined for Perfect Concentricity & Alignment • 3/4" Hex Nut

NEW!


14

AR-15 GRIPS & RECOIL CONTROL

ACCU-Wedge – By Buffer Technologies (T1748-04) ………. $19.95 • Eliminates Play between AR Upper and Lower. • Prevents Play from Developing in ARs with No Play. • Simple Drop-In Installation — Sold in 2-packs Adjustable Tactical Grip™ (T1530) ..………… $24.95 to $29.95 – By XTECH Tactical Discontinued – Limited Inventory! Adjust grip angle to relieve stress on shooters wrist. Accommodates wide range of shooters and shooting styles. • Adjustable Angle: 17° 25° or 33° • Subtle Finger Grooves • Slight Palm Swell • Extended Rear Surface • Well Placed Textures • ETG™ Grip Tape Now Included with all Grips! • Colors: Black & Flat Dark Earth – AR-15 Black …….. (T1530-1) = SOLD OUT – AR-15 FDE ……… (T1530-2) = SOLD OUT – FN SCAR Black … (T1530-3) = $29.95 – FN SCAR FDE …. (T1530-4) = $29.95

AR-15 TRIGGERS

Drop-In AR Triggers by Elftmann Tactical The ONLY Trigger on Bearings! • Aerospace Grade Sealed Needle Bearings • Double-Wound Polished Piano Wire Spring • Easily Adjustable Trigger Pull Weight • Glass-Rod Crisp Break • Improves Accuracy • Drop-In Installation • Lifetime Manufacturer’s Guarantee – ELF-SE Trigger ………,.,,. (T1678) = $168.95 – ELF Service Trigger …,.,,. (T1679) = $258.95 – ELF Match Trigger …..,,,,. (T1680) = $258.95 – ELF 3-gun Trigger ……,,,. (T1681) = $278.95 – ELF AR-10/.308 Trigger ,, (T1682) = $258.95 – ELF AR-9 Trigger ………. (T1683) = $258.95

SNAP CAPS, CHAMBER FLAGS & TOOLS

A-Zoom® Snap Caps (T1473-xx) ………………. $8.95 to $19.95* Solid aluminum with a highly durable polymer “Dead Cap” that withstands over 3000 dry fires. • Solid Aluminum • CNC Machined to Precise SAAMI Dimensions • Anodized for Smooth Functioning & Long Life • Anodized Aluminum Side Plates • Laser Engraved Headstamp * NOTE: This product is being discontinued, See web site for available calibers, part numbers and prices.

TRAINING AIDS

Prohands® Tactical (with LASER Sight) ……………... $44.95 Increases strength, control, endurance and coordination. Red Laser Sight provides instant feedback. ! BLUE (Light Tension) - (T1589-01) – 5 lbs/finger for average hand ! RED (Med. Tension) - (T1589-02) – 7 lbs/finger for above average hands ! BLACK (Heavy Tension) - (T1589-03) – 9 lbs/finger for strong hands ! GRAY (Ex-Heavy Tension) - (T1589-04) – 11 lbs. for extra strong hands Prohands® ………………………………………………….. $22.95 Increases strength, control, endurance and coordination. Laser from Prohands® Tactical can be clipped on … so you don’t need to buy another laser when you transition to a higher tension. ! BLUE (Light Tension) - (T1592-01) – 5 lbs/finger for average hand ! RED (Med. Tension) - (T1592-02) – 7 lbs/finger for above average hands ! BLACK (Heavy Tension) - (T1592-03) – 9 lbs/finger for strong hands ! GRAY (X-Heavy Tension) - (T1592-04) – 11 lbs. for extra strong hands ! ORANGE (XX-Heavy Tension) - (T1592-05) – 13 lbs. for extra strong hands

HEARING PROTECTION

AXIL TRACKR™ Electronic Earmuffs (T1730) ………... $64.95 Amplifies sound while automatically blocking hazardous noise levels from gunfire. • Automatic Noise-Blocking • NRR 25 • Audio Compression – Analog • Sound Dampening Composite Ear Cups • Stereo Sound Amplification • Low Profile Design • Water Resistant • Aux Input Hearing Armor Ear Plugs (T1734) .…….……………...... $24.95 Reusable Silicone Earplugs • Medical Grade Silicone Rubber • NRR 25 • Triple-Flanged Stems Provide Secure Seal • Noise Filter Allows Safe Sound Levels to be Heard while Blocking Unsafe Sound Levels • Comfortable for All Day Wear • Packaged in Protective Storage Pod


15

RIFLE SCOPES

4X20 Rifle Scope with Rings (T1719-2) ….…………….. $49.95 • 4X Magnification. • Only -9/16” Length • Large 30mm Eyepiece Lens • Fully Multi-Coated Lenses • Nitrogen Filled & Fog Free • Designed for Heavy Recoil • 1" Scope Rings Included!

IRON SIGHTS

ASIG SAUER “Micro Sight (T1264-06) ……… Super Sale: $79.95 By Advantage Tactical • Quick Target Acquisition • Greater Target Visibility • 5 Sight Colors (Included) – Fits Sig Sauer P238 .380 Pistol.

OPTIC MOUNTS

Optic Mount for Glock – by The Shooters Box (T1597) …. $69.95 • Simply Replaces Rear Sight. • Low Profile Keeps Red Dot Low • Black Cerakote Finish • Fits All Glock Pistol Models

SKS SIGHT Mount – by Ranch Products (T1718) ………… $21.95 • Solid Investment Cast Metal. • Clean Low Profile Scope Mount • Channel Allows Use of Iron Sights • Simply Replacer SKS Rear Cover • Minor Fitting Required

OPTICS CLEANERS

Clarity® CLEAN It® Lens Towelettes ……….……….…. $12.95 — Safe for all Lenses & Lens Coatings Pre-moistened disposable lens wipes are Great for when you need to travel light! Works on the new Superhydrophobic & AR coatings where other cleaners just bead up and roll off! • Neutral pH • No Silicones • Ammonia Free • Individually foil-packed disposable wipes • Scratch-free – 51 count box of lens wipes.

RED DOT SIGHTS

Ultradot Red Dot Sights (T657 – T1561) …. $203.95 to $313.95 High Performance and Durability at Economical Cost. • Crisp Clear Red Dot • Long Eye Releif • Parallax Free • Low Glare Matt Finishes • Models Available for Every Shooting Sport (See Below)

Matchdot (T1655) ……………….…………….………..… $263.95 • Tube Diameter: 30mm • Length: 5.1" • Weight: 5.1 oz • Dot Sizes: 2 ,4, 6, & 8 MOA • Brightness Settings: 11 • Color: Black/Silver 2-Tone • Reticle Patterns: 1 (Circle Dot)

Matchdot II (T1656) …………………………….………… $283.95 • Tube Diameter: 30mm • Length: 5.1" • Weight: 4.8 oz • Dot Sizes: 2 ,4, 6, & 8 MOA • Brightness Settings: 11 • Color: Black • Reticle Patterns: 2 (Circle Dot & Circle Dot Crosshair)

30mm Red Dot (T1657) ………………….…………….… $203.95 • Tube Diameter: 30mm • Length: 5.1" • Weight: 4.8 oz • Dot Sizes: 2 ,4, 6, & 8 MOA • Brightness Settings: 11 • Colors: Black or Silver • Reticle Patterns: 1 (Circle Dot)

L/T (T1658) ………………….…………….……………….. $313.95 • Sight Window: 25.76mm x 22.01mm • Length: 51mm • Weight: 4.8 oz • Dot Sizes: 4 MOA • Brightness Settings: 10 • Color: Black • Reticle Patterns: 1 (Circle Dot)

Pan-A-V (T1659) ……………………….……….………… $274.95 • Sight Window: 33mm (diagonal) • Length: 5.1" • Weight: 112g (3.95 oz) • Dot Size: 4 MOA • Brightness Settings: 7 • Color: Black • Reticle Patterns: 4 (Circle Dot & Circle Crosshair, Dot Only, Dot Crosshair)

Ultradot 6 Advanced Tactical Aiming System (T1660) $293.95 • Tube Diameter: 30mm • Objective Diameter: 37mm • Length: 5.87" • Weight: 5.9 oz • Dot Sizes: 2 ,4, 6, & 8 MOA • Brightness Settings: 11 • Color: Black • Reticle Patterns: 1 (Circle Dot & Circle Dot Crosshair)

HD Micro (T1661) ………………….……………….…..… $273.95 • Tube Diameter: 28mm • Length: 3.5" • Weight: 4.9 oz • Dot Size: 2 MOA • Brightness Settings: 10 • Color: Black • Reticle Patterns: 1 (Dot Only)


16

FIREARMS CLEANERS & LUBES

UniqueTek Premium Firearms Cleaner™ (T1254-x) A Deep Cleans metal then evaporates completely • Virtually Odorless – Safe to Use Indoors • Contains No Oils or other Additives • Will NOT Swell Rubber • Ammonia Free 4oz (T1254-4) = $6.95 1qt (T1254-1Q) = $21.95 8oz (T1254-8) = $9.95 1gal (T1254-1G) = $49.95

Dri-Slide® Improved Weapons Lubricant (T1247) $14.95 A Super Fine Grade Moly with rust & corrosion inhibitors in a fast evaporating carrier solvent! (4 oz bottle) • Dry Film will Not Attract Dust, Sand or Grit • Temperature Range: –20°F to +1000°F • Needle Applicator gets into Hard to Reach Spots. • Effective as a Bore Treatment

Brian Enos’s SLIDE-GLIDE (T1336-x) … (1/2oz tube) ……. $9.95 A uniquely formulated lubricant that protects all firearms from corrosion and wear. Contains the highest- grade extreme pressure compounds. • Super Stringy so it Stays Put! • Softens Felt Recoil in Autos – Slide-Glide, Standard (T1336-S) – Slide-Glide, Lite (T1336-L)

Slip 2000™ Gun Lube (T1625) … (6-pack of 4ml tubes) ….. $9.95 A specially formulated synthetic lubricant • Will Not Attract Dust, Dirt or Grit • Will Not Harder or Become Tacky • Will Not Dry Out • No Teflon, Silicone or Petroleum Distillates

FIREARMS CLEANING MATTS & CLOTHS

Drymate® Gun Cleaning Pad ……………………………. $11.95 Protect your gun and your bench! • Won’t Soak Through • Emblazoned with UniqueTek Logo – Pistol [16”x20”] … (T1283-P)

Microfiber Gun Cleaning Cloths (T1377) ....................... $12.95 Special weave won't snag like terry cloth. • Lint Free / Non-Abrasive • Highly Absorbent • Reusable and Washable 300 to 500 Times – (3pk of 16”x16” cloths with hemmed edges)

FIREARMS CLEANING TOOLS

Squib Rod/Multi-Tool - By Arredondo Accessories (T1287) ... $13.95 • Squib Rod • Scope Battery Cap Remover • Magazine Base Pad Remover • Windage Screw Adjuster Multi-Function Gun Cleaning Brush (T1286) …………………. $17.95 • Double-Stack Pistol Mags • AR Rifle Mags • AR Upper Receiver • 12GA Shotgun Chambers AR-15 Upper Receiver Swab (T1697) ……………………………. $19.95 • Comfortable Teardrop Handle • 9" Nylon Rod • Washable/Reusable Swabs • Includes 3 Swabs AR-15 Bore Guide - (T1459) …………………………………………. $24.95

• Machined from Solid Delrin • No O-Ring Design • Side Solvent Port Bore-tips™ - By Swab-its® (T1507-xxx) ...................... $4.95 to $9.95 Tough, reusable foam tips engineered for a tight 360-degree contact with the bore. • Washable & Reusable Multiple Times • Fiber and Lint Free • Threads onto Standard Cleaning Rods • Use with Most Cleaning Solvents & Oils – .22 cal to .30 cal: 6-pk = $4.95 – .40 cal & .45 cal: 5-pk = $5.95 – 12 GA, 20 GA & 28 GA/.50 cal: 3-pk = $9.95 * See web site for sale prices. Most calibers already sold out.

Double-Ended Brushes – 6-Pack (T1628) ……………..… $9.95 By UniqueTek, Inc. Perfect for cleaning hard to reach areas. • No Scratch Nylon Bristles • Compatible with Most Gun Cleaning Solvents • Large Brush: 3 Rows / Small Bruss:1 Row • Convenient 6" Length

Bristle Pipe Cleaners – 90ct Bag (T1626) ………………. $9.95 By UniqueTek Perfect for cleaning hard small channels. • Highly Absorbent 100% Cotton Filler • Nylon Bristles for Extra Cleaning Action • Compatible with Most Gun Cleaning Solvents • Convenient 6" Length

SliX-Scrapers (T1713-xx) ................................................. $29.95 Removes carbon/lead ridge from chambers after using shorter carttidges (e.g. .38 Spl. in a .357 Mag. revolver). • Removes Lead/Carbon Ridge from Revolver and Rifle Chambers • Regular Use Reduces Throat Erosion • Absolutely NO Impact on Chamber Dimensions • Available: .357 Mag., 10mm, .44 Mag. & .45 Colt.

CLEARANCE SALE! *


17

GUN CLEANING KITS

Blank/Starter Pistol Cleaning Kit (T1624) …………….... $29.95 By UniqueTek, Inc. All the items needed to clean Starter/Blank Pistols. • UniqueTek Premium Firearms Cleaner • Slip 2000™ Gun Lube • UniqueTek Microfiber Gun Cleaning Cloth • Double-Ended Gun Cleaning Brush • Nylon Cylinder Cleaning Brush • Bristle Pipe Cleaners • Foam Swabs Click-Box Storage Case (T1755-1) ………………………... $9.95 By UniqueTek, Inc. The same handy box as used for our Blank/Starter Pistol Cleaning Kit (featured above). Roomy enough for some compact & subcompact pistols! • External: 7.8" x 5.1" x 1.5" • Internal: 7.3" x 4.4" x 1.4" • Secure “CLICK” Latch • Material: Polypropylene • Color: Natural – Individual (T1755-1) = $9.95 – 3-Pack (T1755-3) = $16.95

GUN CLEANING SYSTEMS

Heated Ultrasonic Gun Cleaner (T1357-6) …………… $477.95* Full-power, industrial-grade ultrasonic cleaners engineered and manufactured in the USA by SHARPERTEK®. • Capacity = 6 Liters (1.5 Gallon) • Tank Dimensions: 11.75" L x 6" W x 6" Deep • Ultrasonic Power: 180 Watts • 3 Ultrasonic Transducers • Dual Heating Elements • NEW! - All Digital Timer & Temperature Controls • “Sweep” & “Degass” Modes. * Plus $50 Flat Rate Shipping (to lower 48 states)

LEAD DECONTAMINATION

D-Lead® Hand Soaps Removes Lead, Moly, Cadmium, Antimony, Zinc, etc. • No harsh Solvents or Chemicals • Gentle on Skin ! Hand Soap (non-abrasive) – 3-Pack of 8oz Bottles: (T1262-8oz-3) = $15.95 – 1gal Bottle: (T1262-1gal) = $29.95 ! Abrasive Hand Soap – 3-Pack of 8oz Bottles: (T1232-8oz-3) = $18.95 – 1gal Bottle: (T1232-1gal) = $35.95 D-Wipe® Towels — No Water? No Problem! Quick, safe, effective cleaning of lead and shooting residues … without water. • Safe for tools and all washable surfaces - even firearms! • Gentle on your skin. – 40count containers (T1233-40) = $6.95 – 150count containers (T1233-150) = $16.95 D-Wipe® Singles D-Wipe® Towels in individual foil-sealed packs. • Light Weight and Compact to Carry • Don't Dry Out. – 22count Box (T1233-22) = $14.95

OPTICS CLEANERS

Clarity® CLEAN It® Lens Towelettes (T1268) …….…… $12.95 — Safe for all Lenses & Lens Coatings Pre-moistened disposable lens wipes are great for when you need to travel light! Works on the new Superhydrophobic & AR coatings where other cleaners just bead up and roll off! • Neutral pH • No Silicones • Ammonia Free • Individually foil-packed disposable wipes • Scratch-free – 51 count box.


18

LED LIGHTS

NEBO® SLIM Pocket LED Light (T1696) ………………. $29.95 A thin ergonomic pocket light for your pocket! • Dimmable from 500 to 50 Lumens. • Belt/Pocket Clip with Hanging Hook • Powerful Magnetic Base • Anodized Aluminum Case • Lithium Polymer Battery: 1500 mAh • Fully Rechargeable (via micro USB) DISCONTINUED — ONLY 1 REMAINING! Light-Load™ II (T1731) …………………………………….. $24.95 A GREAT keychain pocket light. • 2, 22, 230, 550 Lumen • 550 Lm Strobe • Compact: 2.16" L x 0.57" Dia. • Light Weight: 0.9oz • LiPo Battery Rechargeable via micro-USB NanoLITE Tiny LED Light (T1762) ………….……………... $19.95 A Stick-up, Go-anywhere Tiny LED Light. Just stick it in place and tap the button for instant task illumination. The uses are endless! • 4 TruWhite™ LEDs • 3 Settings:300lm, 150lm, 75lm • Rechargeable LiPo Battery • Easy Stick-up Using Nano Tape (included) or Velcro

GUNSMITHING TOOLS

Wyoming Sight Drifter (T1716) …………………………... $34.95 A sight drifting tool using kinetic energy, in a unique spring-loaded device, that gently, accurately and quickly adjusts your sights.

• Great for Field or Bench • No Hammer Needed • No Mar Brass Tip • Compact and Easy to Carry Wyoming Sight Drifter 2 (T1716-02) ……………………. $104.95 Uses kinetic energy, in a unique spring-loaded Device to adjust sights and install/remove pins. • Great for Field or Bench • No Hammer Needed • 4 Interchangeable No Mar Brass Tips • Nylon Roll-up Case Included (not shown) Tool & Die Makers Kit (T1724) ...................................... $124.95 Perfect for Gunsmithing! • Flat Diamond File • Triangular Scraper • Flat Scraper • Round Scraper • Hooked Corner Scraper • Miniature Rotational Deburring Tool Packaged in 5-1/2"x3-3/8"x1/2" Leather Case. 1911 End Mill Bit Set – (T1551) ......……………………… $99.95 • #22 Drill Bit • #35 Drill Bit • #52 Drill Bit • 17/64" Key Cutter • 1/2" End Mill Loctite® Threadlocker® Convenience Pack (T1744) ….. $19.95 0.5ml capsules of the three most popular and useful Loctite products. • Loctite® 222MS® (Purple) • Loctite® 242® (Blue) • Loctite® 609 (Green) • Plus 3, 20Ga Stainless Steel Dispense Needles Firearms Multimedia Guide For Dillon Powder Measures. • Optimized for DESO or HBWC Bullets • 12L14 Steel Case Hardened to FC55+ • Replaces Original Dillon Powder Funnels

– 11th Online Edition (1yr) & Flash Drive 9th Edition .… (T1752-01) = $79.95 – 11th Online Edition (6mo) ……………………………..… (T1752-02) = $19.95

NEW!

NEW!


19

OTHER UNIQUE PRODUCTS

Ultra-Hanger™ - By UniqueTek (T1433-4) …………. $34.95/4-pk A heavy-duty hanger for all your camping, hunting and tactical gear. Won’t break, dumping your expensive gear on the closet floor!. • Max Load Rating = 112 pounds! • Extra Wide: 18-1/2” • Large 1-1/2” Hanger Hook • Extra Wide 3-3/4” Strap Notches • Double “J” Hook for Back Packs • Polypropylene Won’t Absorb

Water Or Rust.

Haboob Dust™ Creative Seasonings ….. $6.95/4oz / $10.95/8oz Haboob Dust™ Dry Rub Blends were developed to blanket a variety of foods with unique flavors that are sure to change the landscape of your cooking! Item #: T1654-XX

Available Flavors • Pizza Blend • Red Rock Blend • Verde Blend • Coffee Rub NanoLITE Tiny LED Light (T1762) ………….……………... $19.95 A Stick-up, Go-anywhere Tiny LED Light. Just stick it in place and tap the button for instant task illumination. The uses are endless! • 4 TruWhite™ LEDs • 3 Settings:300lm, 150lm, 75lm • Rechargeable LiPo Battery • Easy Stick-up Using Nano Tape (included) or Velcro ☆ ☆ ☆ ☆ ☆ ☆ ☆ COMING SOON ☆ ☆ ☆ ☆ ☆ ☆ ☆ Aluminum Powder Hopper Tube (T1765) ………………... $29.95 Aluminum will not hold static charge. Drop-in Replacement for original powder hopper tube on Dillon powder measures. • 6061-T6 Aluminum • Compatible with Dillon Powder Measure Lid • Compatible with Dillon Low Powder Sensor • UniqueTek Precision Powder Baffle is Included – Expected: September 2022

This Icon indicates an animated GIF is on our web page for that product.

This Icon indicates a video demo is on our web page for that product.

Sign up to receive our NEWSLETTER. For Sales, New Products, “Tips” Files, Events and More! Simply scan QR code from your mobile and send email. Or text UNIQUETEKNEWS to 22828. Or email [email protected] and request the Newsletter.

☆ ☆ ☆ ☆ NEW PRODUCT SHOWCASE ☆ ☆ ☆ ☆ OST Carbon Scraper (T1768) ……………...………………... $19.95 Scrapes carbon from AR Rifles BCG Surfaces. Dumps • Cleans Multiple BCG Surfaces • A Pick Aids Disassembly & Cleaning

Under Extractor • Precision Ground Stainless Steel • Black Nitride Finish • Weighs Just 0.78 Ounces (22g) • Stores Easily on a MOLLE Loop • .223/5.56mm/300 Blackout ARs Automatic Casing Catcher (T1767) ……………...………... $49.95 Catches ejected brass from AR Rifles. Dumps Brass automatically when you change mags. • Attaches to Magwell • Leaves Picatinny Rails Free for Scopes, etc. • Holds up to 40 .223 Remington Cases • Injection Molded from Durable Plastic • Fits all Mil-Spec Lowers .45 HTCFB Powder Funnel (T1766) …….…………..…...…$43.95 For Dillon Powder Measures. • Optimized 180/185gr Flat Base SWC .45 cal. bullets sized to 0.452″ • Expander Tip is 3X Longer than OEM Funnel • Prevents Shaving Hi-Tek Coated Bullets Quick-Release FailSafe Rod Nut (T1753) ………………... $14.95 Replaces original wing nut on Dillon Failsafe Rod. Quick-Release feature lets you loosen it quickly when performing caliber changes. NEW! - Also Works on: - Primer follower Rod - Powder Measure Alarm • Only 1 Full Turn of Cap to Release • Large 3/4" Diameter with Knurling • Double-Ended Eight-Finger Collet Grips Securely • Made from Durable Delrin Ground Cord for Dillon Powder Measures (T1760) ….. $31.95 Grounds your powder measure to bleed off static charge and prevent ESD. Plugs into any grounded outlet.

• Plug: NEMA 5-15P • 100kΩ Safety Resistor • Length: 8.3ft, • #10 & #6 Terminal Connectors • Wire: 20 AWG Copper Wire ◊◊◊ We are continuously adding new products. ◊◊◊ ◊◊◊ Please visit our web site to see all the latest items. ◊◊◊

PART NUMBERS: The numbers in parentheses e.g. (T1234) are UniqueTek part numbers and have been added to this catalog for the convenience of our customers. These numbers do not reflect the manufacturer’s part numbers or UPC codes for the products. Some products (e.g., reloading dies) have too many variations to list all their part numbers and prices in this catalog. In those cases, please refer to our web site for a complete list of types and prices.

Prices as of 07/20/22. Prices subject to change without notice. Rev.: 07/20//22

FREE 6 Month Subscription Go to www.uniqutek.com/free-magazine

and use Coupon Code 18UTEK Share this with your Friends!

Back In Stock!

UniqueTek Product Catalog - rev 07/20/22

Documents

Transcript of UniqueTek Product Catalog - rev 07/20/22