Trailer-Catalogue.pdf - Aerial Access

TRAILER RANGE

Established since 1992 Aerial Access Australia is committed to supply and manufacture durable quality products, backed by the dedication of experienced technical support staff and leading edge manufacturing processes.

As a major, well grounded, equipment supplier for the power utilities and telecom-munication industry Aerial Access Australia have unrivalled experience and expertise.

Our trailers have specifically been designed for the utility & construction industry, the robust construction of every trailer has been designed for hard use, long life and easy maintenance.

maintenance.”

All units come with a 12 month warranty with an extended warranty option of up to 2 years. Aerial Access provide a dedicated 1300 phone line for national back-up service enquiries with site repairs being carried out in most locations.

Aerial Access offer product assembly lead times well in advance of other suppliers, allowing clients to put machines to work sooner. With a 12-16 week turn-around time from order, their comprehensive assembly plan allows continuous machinery supply throughout the life of the project.

Committed to meeting time frames and exceeding expectations Aerial Access will ensure you have the right equipment, at the right price, at the right time - fully, backed by comprehensive service and support

Aerial Access... you’ve made the right choice.

“A” FRAME SKID UNIT

Capacity: 3 tonne capacity reel Reel Size: 2450(D) x 1450(W) x 75(B)mm

Frame: RHS Steel Frame, 2 pack epoxy coat complete with forklift tyne and chain fitting lugs. Hydraulic Drive Unit: Take up/pay out assembly 950kg of line pull on 600mm drum at 124 bar 155 bar continuous & 200 bar intermittent 11kW Kohler petrol engine with electric start & re-coil back up. 78 litre oil tank c/w breather, sight

glass & filter

Reel Rack: Heavy duty bronze bush bearings (non-lube) Includes 72mm reel bar with Cross Arm and Lock Collar Quick release clasps mounted on each arm with safety pins Side disengage gearbox drive unit

Available Options: 305mm tensioning brake assembly, complete with line tensioner 400mm tensioning brake assembly, complete with line tensioner

A-Frame Skid

Reel Carrying Trailer/Skid

SRT SERIES

Overall Length: 3580mm Overrall Width: 2450mm

SRT6110 2700kg Axle Load GVM: 3180kg Payload: 2500kg

SRT7110 3180kg Axle Load GVM: 3630kg Payload: 2950kg

SRT 8110 3630kg Axle Load GVM: 4090kg Payload: 3860kg

SRT with brake tensioning assembly

STANDARD FEATURES

Dexter Axles with electric brakes Suits Reel capacity 2400mm x 1500mm wide 72mm reel bar with 2 lock collars Individual latching at each reel bar location, eliminating excessive play Adjustable height hitch with 75mm lunette eye @ 4.5 T Binkley drop leg jack Wiring run inside the steel frame work Exposed pump assemblies are protected by shroud and skid plate 150x100x6mm steel tube main rails 150x75x5mm tongue and A-Frame

125x100x5mm Vertical Bars AVAILABLE OPTIONS

75x75x5mm Bracing Safety break a way kit trickle charger Soldered & sealed wiring loom Sealed beam lights 300mm Tensioning brake assembly Paintwork two pack epoxy polyamide 400mm tensioning brake assembly

Hydraulic retriever/light duty puller 7.5kW petrol driven hydraulic power pack

Spare Wheel 2kg fire extinguisher

Wheel Chock Holders with Rubber Chocks Solar charged break-away kit

Soldered and sealed wiring loom Galvanising available on request

Self Loading Reel Trailers

SLR SERIES

Overall Length: 3580mm Overrall Width: 2450mm

SLR710 3180kg Axle Load GVM: 3700kg Payload: 2280kg



SLR710 & SLR810

STANDARD FEATURES

Dexter Axles with electric brakes Suits Reel capacity 2400mm x 1500mm wide 72mm reel bar with 2 lock collars Individual latching at each reel bar location, eliminating excessive play Separate pumps & release valves operate hydraulic cylinders independently to aid loading and unload-

ing on uneven ground Holding pins latch automatically when cylinders reach full height Adjustable height hitch with 75mm lunette eye @ 4.5 T Binskey drop leg Wiring & hydraulic hoses run inside the steel frame work UHMW-PE wear pads inside riser tubes eliminates steel on steel friction, no lubrication required 150x100x6mm steel tube main rails 150x75x5mm tongue and A-Frame 125x100x5mm Vertical Bars 75x75x5mm Bracing

Paintwork two pack epoxy polyamide AVAILABLE OPTIONS

2kg fire extinguisher Safety brake-a-way kit with trickle charger

Soldered and sealed wiring loom Sealed beam lights

Galvanising available on request Spare Wheel

Wheel Chock holders with rubber chocks

SLRT SERIES

Overall Length: 3988mm Overrall Width: 2450mm Reel Size:2438(D) x 1450(W) x 75mm(B)

SLRT7208 Axle Load: 3180Kg GVM: 4490kg Payload: 2900kg

Line Pull: 955kg@610mm drum/124 bar 1022kg continuous 1340kg intermittent

With Manual Hydraulic Levers: GVM: 4490kg Payload: 3000kg

SLRT7208

STANDARD FEATURES

Torflex dexter axles with electric brakes Twin 100mm lift cylinders operated off lever activated control valve Heavy duty bronze brush bearings (non lube) 72mm reel bar with cross arm and lock collar Fenders, 3mm fabricated steel checker plate Individual latching at each reel bar location, eliminating excessive play Separate pumps & release valves operate hydraulic cylinders independently to aid loading and unload-

ing on uneven ground 6 position adjustable height hitch plate with 75mm lunette eye @ 10 T capacity Wiring & hydraulic hoses run inside the steel frame work 150 x 100 x 6mm steel tube main rails

150 x 75 x 75mm lift arms frame AVAILABLE OPTIONS 1 x4500kg rated front manual drop leg jack 2 x4500kg rated rear manual drop leg jacks 2kg fire extinguisher Grit blast preparation with rust prohibitive Spare Wheel 2-pack epoxy primer, 2 part acrylic polyurethane top coat Solar charged breakaway kit

Hydraulic retriever/tensioner Direct drive reel bar

300/400mm tensioning brake assembly 11kW Kohler petrol engine power pack 14kW Kohler diesel engine power pack

Wheel chocks holders and rubber wheel chocks



SLRT SERIES

Overall Length: 4165mm Overrall Width: 2450mm Reel Size:2440(D) x 1370(W) x 75mm(B)

SLRT8208 Axle Load: 6590Kg GVM: 8545kg Payload: 6500kg

Line Pull: 952kg@600mm drum/124 bar 155 bar continuous 200 bar intermittent

STANDARD FEATURES SLRT8208

Tandem Spring Axles Air/ABS brakes axles Automatic Slack adjusters Twin 100mm Lift Cylinders Heavy Duty Bronze Bushings Includes 90mm Reel Bar with Cross Arm and Locking Collar Heavy Duty bearings Direct drive to reel bar, eliminates problems associated with rim drive systems 150 x 75 x 5mm steel tubing 6 position pinnable adjustable hitch plate 75mm lunette eye 10mm x 1m Galvanised safety chains 44kN drop leg jack 150 x 75 x 6mm steel tube head board 150 x 50 x 6mm steel tube extensions

100 x 75 x 6mm dual stack tubes AVAILABLE OPTIONS 150 x 75 x 6mm steel tube lifting arms Breakaway Kit with battery and trickle charger 2kg fire extinguisher Grit blast preparation with rust prohibitive Spare wheel 2 part epoxy primer, 2 part acrylic polyurethane top coat 400mm tensioning brake assembly

Heavy duty hydraulic take up/pay out assembly Kohler 11kW petrol engine with electric start and recoil back up

78 litres reservoir Double cross over relief valve to cushion motor on sudden stops and prevent overload

Wheel chock holders and rubber wheel chocks Solar charged break away kit

TRT SERIES

Overall Length: 5185mm Cargo Bed: 3658(L)x1830(W)x381(H)mm AVAILABLE in single, double or triple turret configuration

GVM: 6360kg - 8360kg Payload: 4770kg - 6720kg

2 Reel: 1830(D)x1524(W)x75(W)mm Centre hole

Turret Trailers

STANDARD FEATURES Double turret configuration shown with optional tensioner

Reel racks with heavy duty bronze bearings 72mm reel bars with cross arm and one locking collar Turret assemblies rotate on heavy duty cam followers Positive latching every 15 degrees Brake assembly & retrievers are interchangeable Dexter Torflex Axles ST235/80R16 LR-E radial tyres Adjustable height hitch with 75mm lunette eye 5450kg Binkley drop leg jack 12 Gauge smooth steel floor Fabricated 3mm steel diamond tread mud guards Optional hydraulic retriever/light duty puller Soldered & sealed wiring loom Sealed beam lights Trailer is completely sand blasted Rust prohibitivie 2 part epoxy polyamide primer 2 part polyurethane paint AVAILABLE OPTIONS

Hydraulic retriever/light duty puller 305mm or 405mm tensioning brake assemblies

Self contained 9.5kW hydraulic power pack 2 kg fire extinguisher

Spare wheel Safety break away kit with trickle charger

PULLER

Single Axle Pole Trailer GVM: 5300kg Payload: 3950kg

Length Adjustments: PTB81 ~ (6m, 7.6m & 9.1m) PTB111-9K(7.3m, 9.4m & 11.5M)

Rated line pull: 1020kg Full Drum Line Speed: 3.2-4.8 km/hr 4 DRUMS Diameter: 610mm Inside Width: 1220mm Core Diameter: 274mm Reel Capacity: 1829m x 2540mm Samson tenex rope

STANDARD FEATURES Levelwind: Hydraulically actuated Power Train/Hydraulics: 25kW Kohler Gas Engine Tandem Hydraulic Pump 2/16 GPM 2900psi Hydraulic pressure released safety brake All unit operator controls are located at the opera-

tor’s station Off ground operator’s seat Safety screen 406mm Overspin brakes, hydraulically actuated One Grounding lug mounted passenger back

4.5 tonne single Dexter each axle Hardened hubs Adjustable spring pads for wheel alignment ST235/80R16 LR-E Radial tyres Dual wheels Rubber mud flaps Fabricated 3mm steel diamond tread plate mud

-guards Fabricated 3mm steel diamond tread plate mud

-guards Removable front bolster extendable tongue Two double C-Channel bolster 530mm level

lock stanchions Four winch binders with 5.4 tonne nylon tie

down straps Adjustable height hitch with 62mm lunette eye 5.4 tonne Binkley drop leg jack Cargo bed optional Tool boxes optional Safety break-away kit with trickle charger Soldered & sealed wiring loom Sealed Beam lights

Puller & Extendable Pole Trailer

Cable Puller-Tensioner

GVM: 5000kg Payload: 1590kg Overall Length: 4115mm Width: 2440mm Height: 2490mm

Axle Rating: 4440kg Torque Rating: 5875 NM Line speed: 4.8km/hr

Engine: 21kW water cooled diesel Brake: Spring applied hydraulic release Gearbox: Planetary 25:1 ratio

Final Drive: Hydraulic/Planetary Reel Capacity: 1675x965mm Reel Weight Capacity: 2730kg


STANDARD FEATURES

Trailer mounted reel puller or tensioned for new and re-conductor stringing Water cooled 21kW diesel engine Self contained hydraulic drive system Accommodates variable size take-up drums/reels Air actuated ABS brakes Front and rear jack legs optional hydraulic controlled Adjustable tow hitch pintle eye minimum adjustment 558 ~ 864mm Dual 12mm safety chains with safety hooks (16mm available on request) LED Stop/Turn each side 16mm copper clad grounding loops (4) in total 3mm anti slip chequer plate floor complete with tilt up step Paint finish in 2 part polyurethane paint Heavy duty steel frame

OTHER AVAILABLE TRAILERS

Bull-wheel Puller-tensioner combination Bull-wheel tensioner

Bull-wheel puller Aerial and Underground Puller and tensioner trailers

Skid Mount Units also available


Bullwheel Tensioner GVM: 8346kg Payload: 5625kg Overall Length: 7320mm Width: 2450mm Height: 2690mm

Reel Capacity: 2140mm(D)x1525mm(W)x75mm (centre hole) 3629kg Tandem Axles 312mm x 85mm Air Brakes on all wheels

17.8kN Tension Rating 1.61km/hr (2) 970mm Dual Bull Wheels Bull wheels equipped (2) 510mm Brass brakes (2) Enclosed roller guide assemblies mounted at the base of of the bull wheels for aiding con-ductor onto bull wheel grooves Hydraulically actuated from control panel via hydraulic hand pump Operators Seat Safety screen Number of Grooves: 5 Groove Diameter: 40mm

Bullwheel Tensioner

TOUNGE, HITCH & JACK 150mm x 75mm Tubular Steel A-Frame 6-Position Adjustable Hitch Plate (357mm through to 686mm) 76mm lunette eye 10mm x 914mm Galvanized safety chains with safety hooks and anchor shackles Hydraulic drop jack mounted in A-frame Dual Hydraulic Stabiliser jacks at rear corners

MAIN FRAME

153mmx75mm Tubular Steel Main Frame 75mm Channel Steel Crossmembers at front of cargo bed 75mm Channel Steel Crossmembers at rear of cargo bed

OPTIONS:

Hydraulic Take Up/Pay Out Assembly Direct Drive to Reel bar

9.3kN of Line Pull on a 610mm Drum @ 124 Bar 155 Bar Continuous

203 Bar Intermittent Double Cross over relief valve to cushion motor on sudden stops and to prevent overload

Bull Wheel Tensioner

Trailer-Catalogue.pdf - Aerial Access

Documents

Transcript of Trailer-Catalogue.pdf - Aerial Access