track tools - Steltools
-
Upload
khangminh22 -
Category
Documents
-
view
2 -
download
0
Transcript of track tools - Steltools
CONTENTS
TRACK TOOLSTools For Use On Pandrol Fastening SystemsTrack ToolsRail Turning Bars & SHC and SCHWIHAG Bars & Points HandleSpannersJack HandlesPad Scrappers & Pot DollysDigging Bars, Chair Screws & Ferrulle ExtractorsCrowbarsInsulated Ground ToolsNon Insulated Ground ToolsHammers
1,2,3
4556789
10111213
CUTTERS, AUGERS, BREAKERSSTEL Rail CuttersRotabroach Rail Cutters AugersBreakers
14151617
SOCKETS1” Inch Drive Sockets1/2” Inch Drive SocketsO - Rings Retaining PinsSocket Adaptors
18181818
18,19
FUEL MANAGEMENT20 Litre Fuel Cans10 Litre Fuel Cans5 Litre Fuel CansSafety CansPlastic Jerry Cans Rigid SpoutsFlexible SpoutsNo Spill SpoutsPlastic Containers
21,2321,2322,23
222224242525
SPILL MANAGEMENTAbsorbantsPlant Nappies
26,2727
SIGNAGESpeed BoardsIndicator BoardsTildawn, Warning LightsWarning Boards
282930
31,32
OILSOils 33
SPARESSpark PlugsDrive Belts
3435
Cutting Disc’sGrinding Stone’s
3636
ABRASIVES
BATTERIESBatteries 37
LIGHTING
PPE
CLAMPING & FASSETTAS
CONTENTS
GlovesTrack Workers PPE
3839,40
Lucia Link LightPlugs & Sockets40 Watt Magnetic Work Light27 Watt Magnetic Work Light
41424344
Emergency G - ClampFishplatesFassetta ClampsFassetta Bolts
45454646
Digital ThermometerAnalogue ThermometerSingle Track Measuring WheelDual Track Measuring Wheel
TRACK MEASURING47474848
WHEEL BARROWInsulated Wheel Barrow 49
SMALL PLANTRail HandlerB - Type TrolleyLink Trolley Trolley RampsSkate BasketImpact WrenchRail SawChainsaw Chainsaw SparesBernard EngineBernard Engine SparesGeneratorsDust Suppression Water BottlePump BottleSTEL’s Battery Powered Rail DrillMagic Wand Track MagnetsLever Hoist & Clamps
50-5758-6263-69
7071-7374-75
7677,7879,80
8182
83-858686
87,888990
91-98
TOOLS FOR USE ON PANDROL FASTENING SYSTEMS
Insulated Pandrol E Clip & PR Clip
Pan Puller
Part No; FIBTPCPL
Insulated PandrolE Clip Pan Setter
Part No; FIBTPCST
Insulated PandrolE Plus Pan Puller
Part No; FIBTEPPP
Part No; FIBTESEX
Insulated PandrolFastclip Extractor
Part No; FIBTFCEXT
Insulated PandrolFastclip Installer
Part No; FIBTFCINT
Insulated PandrolFastclip Sleeper Lifter
Part No; FIBTFCSL
Insulated PandrolPan Lock Pan Puller
Part No; FIBT65
Insulated PandrolRear Arch Extractor
Part No; FIBTLP15177
Insulated PandrolElastic Spike Extractor
TRAC
K TO
OLS
1
Pandrol E Plus Pan Puller
Part No; EPPP
Pandrol E Plus Pan Puller
Part No; LP12717
Pandrol Fastclip & Vipa-Sp Installer
Part No; FCINTVIPA
Part No; FCEXT
Pandrol Fastclip FE/FC & Vipa-Sp
Extractor
Part No; LP18679
Pandrol Fastclip Installer
Part No; FCINT
Pandrol FastclipSleeper Lifter
Part No; FCSL
Pandrol FE/FC & Vipa-SP Installer
Part No; LP18681
Pandrol Pan Lock Puller
Part No; PLPL
Pandrol Fastclip Extractor
TOOLS FOR USE ON PANDROL FASTENING SYSTEMS
TRAC
K TO
OLS
2
Pandrol PR, E, E-Plus & RE Clips
Pan Setter
Part No; PCST
Pandrol Rear ArchExtension Tool
Part No; FCREARARCH
Pandrol RT60 Check Rail Installer
Part No; LP15561
Part No; PCPL
Pandrol Wear Gauge For Pan Puller Hook
Part No; PPHG
Pandrol Spare Hook For E Plus Pan Puller
Part No; EPSHK
PandrolSpare Bolt For Pan Puller
Part No; PPSHKB
PandrolSpare Hook For C & D
Pan Puller
Part No; PPSHK
PandrolType C For PR & E-Clip
Pan Puller
TOOLS FOR USE ON PANDROL FASTENING SYSTEMS
TRAC
K TO
OLS
3
TRAC
K TO
OLS
4
TRACK TOOLS
Insulated Concrete SleeperTongs
Part No; FIBT104
Insulated Steel SleeperTongs
Part No; FIBTSLSTNG
Insulated Timber Nips
Part No; FIBT103
Part No; FIBTSHT002
Concrete Sleeper Tongs
Part No; CT
Rail Tongs
Part No; RTG
Steel Sleeper Tongs
Part No; SLSTNG
Timber Nips
Part No; TNP
Timber Sleeper Tongs Specifically Designed For
NWR
Part No; SHT002
Insulated Timber Sleeper Tongs Specifically Designed
For NWR
TRAC
K TO
OLS
5
RAIL TURNING BARS & SHC & SCHWIHAG BARS & POINTS HANDLES
Rail Turning Bar Bull Head Rail
Part No; RTBBH
Insulated Rail Turning BarBull Head Rail & Flat
Bottom
Part No; FIBT54 (BH) ; FIBT 55 (FB)
Rail Turning Bar Flat Bottom
Part No; RTBFB
Part No; RW19372
SHC De-Clipping Bar
Part No; SHCBAR
InsulatedSHC De-Clipping Bar
Part No; FIBTSHC
SCHWIHAG Bar
Part No; SWGB
Points Machine Winding Handle Cranked Suits Style
63 Points MachineSTEL’s Point Machine
Winding Handle Cranked
Part No; RW19370
STEL’s Point Machine Pump Handle Straight
Part No; RW19371
TRAC
K TO
OLS
6
SPANNERS
15” Fishplate Nut Running Spanner
Part No; FPSS
30” Fishplate Nut Locking Spanner
Part No; FPSL
Insulated Bi-Square Fishplate Nut Spanner
Part No; FIBT78A
Part No; FIBTTBAR1
Insulated Check Rail Spanner - 1-11/16” AF X 30”
Part No; FIBT63
Insulated Fishplate Spanner
Part No; FIBT64
Insulated Hook Switch Pole
Part No; FIBT56
Insulated 1” T Drive Bar
Any Spanner Can Be Made To Order Just Contact The Sales Team!
Insulated 1-1/4”Jack Handle
Part No; FIBT52
Insulated Hydraclaw Jack Handle
Part No; FIBT57
InsulatedHydramite Jack Handle
Part No; FIBT58
Part No; FIBT51
InsulatedSimplex 85A & Duff 516T
Jack Handle
Part No; FIBT53
Insulated Simplex A17 Jack Handle
Part No; FIBT59
Jack HandlePan Jack, Toe Jack,
Zwicky / Kenhi Handle
Part No; JACK1
Simplex A17Jack Handle
Part No; SIMPJH
Slewing Jack Handle OnlyCH65 Model
Part No; JACK2 TRAC
K TO
OLS
7
JACK HANDLES
Insulated Pan JackJack Handle
TRAC
K TO
OLS
8
PAD SCRAPERS & POT DOLLY’S
Insulated Pad Scraper
Part No; FIBT35
Large Pad Scraper
Part No; PSCL
Small Pad Scraper
Part No; PSCS
All Steel Square Pot Dolly 22MM For Wood
Part No; POTDOLL22MMSQ
All Steel Pot Dolly Hexagon 17MM
Part No; POTDOLL17MM
Insulated Pot Dolly Hexagon17MM For Concrete
Part No; FIBT47
Insulated Pot Dolly Square22MM For Wood
Part No; FIBT46
All Steel Pot Dolly Hexagon 19MM
Part No; POTDOLL19MM
Pad Scraper Thin Blade 300MM x 3MM Thick
Part No; FIBT35
TRAC
K TO
OLS
9
DIGGING BARS, CHAIR SCREWS & FERRULE EXTRACTORS
T - Handled Chair Screw1-1/8”
Part No; PDCONC
InsulatedT - Handled Chair Screw
1-1/8”
Part No; FIBT77
Heavy Duty 1.7m Digging Bar
Part No; DIGBAR
Part No; FIBT70
All Steel Extractor Ferrule
Part No; FEX
Insulated Extractor Ferrule
Part No; FIBTFEX
Insulated Digging Bar
Chisel & Point Crowbar
Part No; CBCPR
Heel & Point Crowbar1-1/8” Hex
Part No; CBHP
Heel & Point Crowbar(Round Shaft)
Part No; CBHPR
Part No; FIBT23
Insulated Chisel End Crowbar
Part No; FIBT25
Insulated Heel & Point Crowbar
Part No; FIBT26
Insulated Heel End Crowbar
Part No; FIBT79
Insulated Point End Crowbar
Part No; FIBT24TRAC
K TO
OLS
10
CROWBARS
Insulated Chisel & Point Crowbar
TRAC
K TO
OLS
11
INSULATED SHOVELS TO BS 8020:2011
Square Mouth ShovelOne Piece Handle
Part No; FIBT01R
Taper Mouth ShovelOne Piece Handle
Part No; FIBT02R
Trenching ShovelOne Piece Handle
Part No; FIBT03R
Part No; FIBT05R
Newcastle Draining ShovelOne Piece Handle
Part No; FIBT07R
Cable Laying ShovelOne Piece Handle
Part No; FIBT08R
Clay Grafter ShovelOne Piece Handle
Part No; FIBT09R
Round Mouth ShovelOne Piece Handle
Part No; FIBT10R
Chipping Shovel Insulated
Part No; FIBT31
Rabbit ShovelOne Piece Handle
TRAC
K TO
OLS
12
NON - INSULATED SHOVELS
Steel Taper Mouth Shovel
Part No; SSTM
Steel Round Mouth Shovel
Part No; SSRM
Steel Clay Grafter Shovel
Part No; SSGT
Part No; SSCL
Steel Newcastle Draining Shovel
Part No; SSND
Steel Rabbit Shovel
Part No; SSRS
Steel Trenching Shovel
Part No; SSTS
Steel Square Mouth Shovel
Part No; SSSM
Steel Cable Laying Shovel
TRAC
K TO
OLS
13
HAMMERS
Hickory Handle Keying
Hammer - 10LB
Part No; 10KH
Hickory Handle Keying Hammer - 7LB
Part No; 7KH
Hickory Handle Sledge Hammer - 10LB
Part No; 10SH
Part No; 14SH
Hickory Handle Sledge Hammer - 7LB
Part No; 7SH
Insulated Sledge Hammer - 10LB
Part No; FIBT61
Insulated Sledge Hammer -
14LB
Part No; FIBT62
Insulated Sledge Hammer - 7LB
Part No; FIBT60
Insulated Keying Hammer - 7LB OR 10LB
Part No; FIBT48 (10LB) FIBT49 (7LB)
Hickory Handle Sledge Hammer - 14LB
CUTT
ERS
14
STEL RAIL CUTTERS
STEL M42 Rail Cutter
Short Series
Size; Part No; 12MM CRC12S13MM CRC13S14MM CRC14S15MM CRC15S16MM CRC16S17MM CRC17S18MM CRC18S19MM CRC19S20MM CRC20S21MM CRC21S22MM CRC22S23MM CRC23S24MM CRC24S
Size; Part No; 12MM CRC12L13MM CRC13L14MM CRC14L15MM CRC15L16MM CRC16L17MM CRC17L18MM CRC18L19MM CRC19L20MM CRC20L21MM CRC21L22MM CRC22L23MM CRC23L24MM CRC24L
Size; Part No; 25MM CRC25S26MM CRC26S27MM CRC27S28MM CRC28S29MM CRC29S30MM CRC30S31MM CRC31S32MM CRC32S33MM CRC33S34MM CRC34S35MM CRC35S36MM CRC36S37MM CRC37S
Size; Part No; 25MM CRC25L26MM CRC26L27MM CRC27L28MM CRC28L29MM CRC29L30MM CRC30L31MM CRC31L32MM CRC32L33MM CRC33L34MM CRC34L35MM CRC35L36MM CRC36L37MM CRC37L
STELM42 Rail Cutter
Long Series
Short SeriesSize; Part No; 19MM TCTR19S22MM TCTR22S23MM TCTR23S25MM TCTR25S26MM TCTR26S28MM TCTR28S30MM TCTR30S32MM TCTR32S33MM TCTR33S
Pilot Pins Size; Part No;Short Pilot Pin PPSLong Pilot Pin PPL
Upon Enquiry Different Size Cutters May Be Available.
STELTCT
Rail Cutter Series
CUTT
ERS
15
ROTABROACH RAIL CUTTERS
Upon Enquiry Different Size Cutters May Be Available.
RotabroachM42 Rail Cutters
Short Series
RotabroachM42 Rail Cutters
Long Series
RotabroachTCT Rail Cutters
Short & Long Series
Size; Part No; 13MM SRCV13013.5MM SRCV13514MM SRCV14015MM SRCV15017MM SRCV17018MM SRCV18019MM SRCV19020MM SRCV20021MM SRCV21022MM SRCV22024MM SRCV240
Size; Part No; 25MM SRCV25026MM SRCV26027MM SRCV27028MM SRCV28029MM SRCV29030MM SRCV30031MM SRCV31032MM SRCV32033MM SRCV33034MM SRCV34036MM SRCV360
Size; Part No; 13MM SRCVL13015MM SRCVL15019MM SRCVL1920MM SRCVL20021MM SRCVL21022MM SRCVL22024MM SRCVL24025MM SRCVL25026MM SRCVL26028MM SRCVL28030MM SRCVL300
Size; Part No; 32MM SRCVL32034MM SRCVL340
Long SeriesSize; Part No; 19MM SCRWC190L22MM SCRWC220L26MM SCRWC260L26MMXL SCRWC260XL28MM SCRWC280L28MMXL SCRWC280XL30MM SCRWC300L32MM SCRWC320L
Short SeriesSize; Part No; 13.5MM SCRWC13517MM SCRWC17019MM SCRWC19020MM SCRWC20021MM SCRWC21022MM SCRWC22024MM SCRWC24026MM SCRWC26027MM SCRWC27028MM SCRWC28030MM SCRWC30032MM SCRWC32034MM SCRWC340
Pilot Pins Size; Part No;Short Pilot Pin PPSLong Pilot Pin PPL
AUG
ERS
16
AUGERS
Cembre
Maxim
Geismar
Sleeper Drill AugerSize; Part No;10mm x 320mm to suit Cembre Sleeper Drill CEM1012mm x 320mm to suit Cembre Sleeper Drill CEM1213mm x 320mm to suit Cembre Sleeper Drill CEM1316mm x 320mm to suit Cembre Sleeper Drill CEM1617mm x 320mm to suit Cembre Sleeper Drill CEM1718mm x 320mm to suit Cembre Sleeper Drill CEM1819mm x 320mm to suit Cembre Sleeper Drill CEM1921mm x 320mm to suit Cembre Sleeper Drill CEM2122mm x 320mm to suit Cembre Sleeper Drill CEM22
Sleeper Drill AugerSize; Part No;10mm x 240mm to suit Maxim Auger Attachment MAX1011mm x 240mm to suit Maxim Auger Attachment MAX1112mm x 240mm to suit Maxim Auger Attachment MAX1213mm x 240mm to suit Maxim Auger Attachment MAX1316mm x 240mm to suit Maxim Auger Attachment MAX1617mm x 240mm to suit Maxim Auger Attachment MAX1718mm x 240mm to suit Maxim Auger Attachment MAX1819mm x 240mm to suit Maxim Auger Attachment MAX1921mm x 240mm to suit Maxim Auger Attachment MAX2122mm x 240mm to suit Maxim Auger Attachment MAX22
Sleeper Drill AugerSize; Part No;10mm x 290mm Geismar Type GEIS1016mm x 290mm Geismar Type GEIS1619mm x 290mm Geismar Type GEIS19
BREA
KER
STEE
LS17
BREAKER STEELS
Picture Part No Description; Fitment;
GTL3039Bosch 11304
Chisel450mm/ 18”
GTL3036
Bosch 11304 Flat Point
450mm/ 18”
GTL3041Bosch 11304
Chisel3” Wide
Bosch 11304
Picture Cat Ref; Description; Fitment;
GTL2001GTL2002
Point 380mm/ 15”450mm/ 18”
GTL2008GTL2009GTL2010
Chisel 300mm/12”380mm/ 15”450mm/ 18”
GTL2017 Tarmac Cutter
GTL2019 Asphalt Cutter
GTL2020 18” Long Chisel (3”)
GTL2022 Clay Spade
GTL2030 Tie Tamper
GTL2031 Tamping Shank
GTL2033 Tamping Pad
1 1/4” Hexagon
On Request We Are Able To Source Different Makes And Models Of Breaker Steels
SOCK
ETS
18
IMPACT SOCKETS
1” Drive Impact SocketsHexagon
1/2” Drive Impact SocketsHexagon
1” Drive Bi-Square
Size; Part Code;16MM SOC16MMX117MM SOC17MMX118MM SOC18MMX119MM SOC19MMX120MM SOC20MMX121MM SOC21MMX122MM SOC22MMX123MM SOC23MMX124MM SOC24MMX125MM SOC25MMX126MM SOC26MMX1
Size; Part Code;27MM SOC27MMX128MM SOC28MMX129MM SOC29MMX130MM SOC30MMX131MM SOC31MMX132MM SOC32MMX133MM SOC33MMX134MM SOC34MMX135MM SOC35MMX136MM SOC36MMX137MM SOC37MMX1
Size; Part Code;38MM SOC38MMX139MM SOC39MMX140MM SOC40MMX141MM SOC41MMX142MM SOC42MMX143MM SOC43MMX144MM SOC44MMX145MM SOC45MMX146MM SOC46MMX150MM SOC50MMX155MM SOC55MMX1
Size; Part Code;8MM SOC8MMX1210MM SOC10MMX1212MM SOC12MMX1213MM SOC13MMX1214MM SOC14MMX1215MM SOC15MMX1216MM SOC16MMX1217MM SOC17MMX1218MM SOC18MMX1219MM SOC19MMX1220MM SOC20MMX12
Size; Part Code;21MM SOC21MMX1222MM SOC22MMX1223MM SOC23MMX1224MM SOC24MMX1225MM SOC25MMX1226MM SOC26MMX1227MM SOC27MMX1228MM SOC28MMX1229MM SOC29MMX1230MM SOC30MMX1232MM SOC32MMX12
Size; Part Code;33MM SOC33MMX1236MM SOC36MMX1238MM SOC38MMX1239MM SOC39MMX1241MM SOC41MMX1242MM SOC42MMX1246MM SOC46MMX12
Size; Part Code;1-1/8” X 1” SOC118SQ1-3/16” X 1” SOC1316SQ1-3/8” X 1” SOC138SQ1-5/16” X 1” SOC1516SQ1-11/16” X 1” SOC11116SQ
For Any Sockets That Aren’t Listed Above Please Enquire With The Sales Team!
Size; Part Code;45MM 45MMOR50MM 50MMOR55MM 55MMOR60MM 60MMOR
O - Rings
Size; Part Code;45MM 45MMPIN50MM 50MMPIN55MM 55MMPIN60MM 60MMPIN
RetainingPins
28 x 21 mm Part Code;1” SOCVOS1/2” SOCVOS123/4” SOCOVS341” 120MM SOCVOSL1/2” 90MM SOCVOSL123/4” 90MM SOCVOSL34
SOCK
ETS
19
SOCKETS ADAPTORS
Socket Vossloh28MM X 21MM X 1” Drive
Part No; SOCVOS
Socket Vossloh28MM X 21MM X 1/2” Drive
Part No; SOCVOS12
1/2” Drive X T50 Torx
Part No; SOCT50X12
Part No; SOCT70X1
3/4” Drive X T70 Torx
Part No; SOCT70X34
Socket Adaptor 3/4” Female X 1” Male
Part No; ADAP34FX1M
Socket Adaptor 1/2” Female X 1” Male
Part No; ADAP12FX1M
Socket Adaptor 1” Female X 1/2” Male
Part No; ADAP1FX12M
Socket Adaptor 1” Female X 3/4” Male
Part No; ADAP1FX34M
1” Drive X T70 Torx
SOCK
ETS
20
SOCKET ADAPTORS
Socket Adaptor3/4” Female X 1/2” Male
Part No; ADAP34FX12M
Socket Adaptor1” Male X 1” Male
Part No; ADAP1MX1M
Socket Connector3/4” Male X 3/4” Male
Part No; ADAP34MX34M
Part No; ADAP12MX12M
Socket Adaptor - Square1” Male X 3/4” Male
Part No; SOCADMEF
Universal Joint 1” Male X 1” Female
Part No; UNIVADAP
Extension Bar1” Drive X 300MM
Part No; EB300MM
Extension Bar1/2” Drive X 300MM
Part No; EB12X300
Extension Bar1” Drive X 250MM
Part No; EB250MM
Socket Adaptor1/2” Male X 1/2” Male
20 Litre Jerry Can Black
Part No; JC20LB
20 Litre Jerry Can Green
Part No; JC20LG
20 Litre Jerry Can Red
Part No; JC20LR
Part No; JC20LY
10 Litre Jerry Can Black
Part No; JC10LB
10 Litre Jerry Can Green
Part No; JC10LG
10 Litre Jerry Can Red
Part No; JC10LR
10 Litre Jerry Can Yellow
Part No; JC10LY
5 Litre Jerry Can Black
Part No; JC5LB
20 Litre Jerry Can Yellow
FUEL
MAN
AGEM
ENT
21
JERRY CANS & SPOUTS
JERRY CANS & SPOUTS
5 Litre Jerry Can Green
Part No; JC5LG
5 Litre Jerry Can Red
Part No; JC5LB
5 Litre Jerry Can Yellow
Part No; JC5LY
Part No; JC10LRSCREW
10 Litre Screw Top Jerry Can Green
Part No; JC10LRSCREWG
10 Litre Screw Top Jerry Can Yellow
Part No; JC10LRSCREWY
10 Litre Jerry Can, Explosion Proof
Part No; JC10LEXY
5 Litre Jerry Can,Explosion Proof
Part No; JC5LEXY
5 Litre Plastic Jerry CanBlack
Part No; PJC5LB
10 Litre Screw Top Jerry Can Red
FUEL
MAN
AGEM
ENT
22
JERRY CANS & SPOUTS
JERRY CANS & SPOUTS
FUEL
MAN
AGEM
ENT
23
20 Litre Jerry Can Blue
Part No; 300047
20 Litre Jerry Can Green Screw Top
Part No; 300033
20 Litre Jerry Can Black Screw Top
Part No; 300034
Part No; 300035
20 Litre Jerry Can Yellow Screw Top
Part No; 300036
10 Litre Jerry Can Black Screw Top
Part No; 300037
10 Litre Jerry Can Green Screw Top
Part No; 300038
10 Litre Jerry Can Red Screw Top
Part No; 300039
10 Litre Jerry Can Yellow Screw Top
Part No; 300040
20 Litre Jerry Can Red Screw Top
FUEL
MAN
AGEM
ENT
24
JERRY CANS & SPOUTS
5 Litre Plastic Jerry CanGreen
Part No; PJC5LG
5 Litre Plastic Jerry CanRed
Part No; PJC5LR
Jerry Can Rigid Spout
Green
Part No; JCFSRG
Part No; JCFSRB
Jerry Can Rigid Spout
Red
Part No; JCFSRR
Jerry Can Rigid SpoutYellow
Part No; JCFSRY
Jerry Can Flexible SpoutBlack
Part No; JCPSFB
Jerry Can Flexible SpoutGreen
Part No; JCPSFG
Jerry Can Flexible SpoutYellow
Part No; JCPSFY
Jerry Can Rigid SpoutBlack
FUEL
MAN
AGEM
ENT
25
JERRY CANS & SPOUTS
Jerry Can Flexible SpoutRed
Part No; JCSFR
No Spill Fuel SpoutGreen
Part No; 300008
No Spill Fuel SpoutYellow
Part No; 300007
Part No; 300009
5 Ltr Plastic ContainerC/W Cap
Part No; BOT5L
10 Ltr Plastic ContainerC/W Cap
Part No; BOT10L
20 Ltr Plastic ContainerC/W Cap
Part No; BOT20L
No Spill Fuel SpoutBlack
Flexible Black Spout
Part No; 300046
SPIL
L M
ANAG
EMEN
T26
ABSORBENTS
Absorbent Pads Lightweight500MM X 400MM Qty 200
Part No; G65940
Absorbent Pads Heayweight500MM X 400MM Qty 100
Part No; G65935
Absorbent Rolls Heavy Weight
Part No; G65945
Part No; G65982
Isol8 Organic Absorbent Bag 1.3Kg
Part No; G65975
Multi-Zorb Absorbent Granules 20Ltr
Part No; G65980
Spill Kit, Emergency Oil, Vinyl Bag, 50 Ltr
Part No; SK50O
Spill Kit, Mini,Oil Only, 10 Ltr
Part No; VC683
Spill Kit, Emergency, Maintainance, Vinyl Bag,
50 Ltr
Part No; SK50U
Absodan Absorbent Granules 20Ltr
SPIL
L M
ANAG
EMEN
T27
Plant Nappy Small685MM X 500MM
Part No; PNS
Plant Nappy Medium1000MM X 685MM
Part No; PNM
Plant Nappy Large2000MM X 1370MM
Part No; PNL
Part No; PNSL
Plant Nappy Liner Medium
Part No; PNML
Plant Nappy Liner Large
Part No; PNLL
Oil Spill Sheets Qty 200500MM x 400MM
Part No; H0425040
Absorbent Socks Universal75MM x 1.2M Qty 2
Part No; G65950
Spill Control Kit 30 LitreUniversal
Part No; G65955
Plant Nappy Liner Small
ABSORBENTS
SIG
NAG
E28
SPEED BOARDS
Speed; Part No; Description;5 Mph TSR0105 Speed Board, 5 Mph, 390mm X 390mm10 Mph TSR0110 Speed Board, 10 Mph, 390mm X 390mm15 Mph TSR0115 Speed Board, 15 Mph, 390mm X 390mm20 Mph TSR0120 Speed Board, 20 Mph, 390mm X 390mm25 Mph TSR0125 Speed Board, 25 Mph, 390mm X 390mm30 Mph TSR0130 Speed Board, 30 Mph, 390mm X 390mm35 Mph TSR0135 Speed Board, 35 Mph, 390mm X 390mm40 Mph TSR0140 Speed Board, 40 Mph, 390mm X 390mm45 Mph TSR0145 Speed Board, 45 Mph, 390mm X 390mm50 Mph TSR0150 Speed Board, 50 Mph, 390mm X 390mm55 Mph TSR0155 Speed Board, 55 Mph, 390mm X 390mm60 Mph TSR0160 Speed Board, 60 Mph, 390mm X 390mm65 Mph TSR0165 Speed Board, 65 Mph, 390mm X 390mm70 Mph TSR0170 Speed Board, 70 Mph, 390mm X 390mm75 Mph TSR0175 Speed Board, 75 Mph, 390mm X 390mm80 Mph TSR0180 Speed Board, 80 Mph, 390mm X 390mm85 Mph TSR0185 Speed Board, 85 Mph, 390mm X 390mm90 Mph TSR0190 Speed Board, 90 Mph, 390mm X 390mm95 Mph TSR0195 Speed Board, 95 Mph, 390mm X 390mm100 Mph TSR0100 Speed Board, 100 Mph, 390mm X 390mm125 Mph TSR01125 Speed Board, 125 Mph, 390mm X 390mm
TSR / ESR Signboard Board Supports System Track Mounted Signs / Emergency Indicator Suitable For Line Speeds Up To 125 MPHPart No; FTESR001
SIG
NAG
E29
INDICATOR BOARDS
Cancelling Indicator Board
390mm x 390mm
Part No; TSR06
Directional Indicator Board
390mm x 390mm
Part No; TSR04
Spate Indicator Board
390mm x 390mm
Part No; TSR05
Part No; TSR21A
Termination Indicator Board
390mm x 390mm
Part No; TSR07
Bullseye Temporary Speed Restriction Board800mm x 300mm
Part No; TSR02
Bullseye Temporary Speed Restriction Board560mm x 300mm
Part No; TSR02C
Repeater Warning Temporary Speed Board
560mm x 660mm
Part No; TSR08A
Non Conductor Board Post
50mm x 50mm x 1800mm
Part No; TSR1418
Temporary Speed Restriction Board390mm x 390mm
SIG
NAG
E30
WARNING BOARDS & LIGHTS
Tildawn Light, Red Lens,
Solid And Flashing
Part No; TILDAWN
Tildawn Light, Blue Lens,
Solid And Flashing
Part No; TILDAWNB
Tildawn Light,Red Solid Comes Fitted With
A Rail Clamp
Part No; TILDAWNRC
Part No; REDLED
Blue Led Warning Light
Part No; BLUELED
Amber Led Warning Light
Part No; AMBERLED
Lantern Battery
Part No; LANTBAT
Red Led Warning Light
Batteries Are Not Included With The Till Dawn Lights.The Till Dawns Require 2 x LANTBAT For Use.
SIG
NAG
E31
WARNING BOARDS & LIGHTS
Early Warning Mini Eros Board
Part No; EROS
Early Warning Mini Eros Board Free Standing
Part No; EROSMC
Mce Eros Battery Pack
Part No; MCE1632
Part No; MCE1656
Led Mk11 Marker Board
Part No; 20039505
Mce Compact WorksiteMarker Board
Part No; MCE1402
Mk11 Marker BoardPossession Limit Board
Switch Assembly
Part No; 54000089
Mk11 Marker BoardPcb Assembly Bottom
Part No; 54000091
Mk11 Marker BoardThief Proof Bolt
M6 x 91mm
Part No; 54003082
Battery Pack Plastic Case Only For Mini Eros
Board
SIG
NAG
E32
WARNING BOARDS & LIGHTS
Amber Lense Kit For Mk11 Marker Board
( C/W Fasteners)
Part No; 54037131
Red Lense Kit For Mk11 Marker Board
( C/W Fasteners)
Part No; 54037130
Mk11 Marker Board Label - Engineers Supervisors
Area Red
Part No; 54038002
Part No; 54038003
Led Stop Possession Limit Board
Part No; MCE306
Led Stop Possession Limit Board With Rail Clamp
Part No; MCEPLB205STk
Led Possession Limit Board
Part No; 5707990
Mk11 Marker Board Label - PICOP Amber
OIL
33
OILS
Part No; Description; Size;
OIL1SYN Two Stroke Fully Synthetic Oil 100MLOIL1 Two Stroke Semi-Synthetic Oil 100MLOIL18 3 In 1 Oil Drip Applicator 100MLOIL14 WD-40 Spray 100MLOIL19 3 In 1 Oil Drip Applicator 200MLOIL23 3 In 1 Spray 200MLOIL15 WD-40 Spray 200MLOIL31 3 In 1 Ptfe Aerosol Spray 250MLOIL22 3 In 1 High Performance Lubricant 400MLOIL20 3 In 1 Penetrant Spray 400MLOIL25 3 In 1 Silicone Lubricant 400ML
X61740 Force Chain Lube Spray [6 Pk] 400MLX61775 Force Penetrating Fluid [6 Pk] 400ML
OIL2 WD-40 Smart Straw Spray 450MLOIL16 WD-40 Spray 450MLOIL29 WD-40 Spray 600ML
Part No; Description; Size;
OIL6 Anti-Fling Chainsaw Oil 1L502 51 19-01 Husqvarna Chainsaw Oil [Genuine] 1L
OIL5 Sae 30 Engine Oil 1LOIL4C Semi-Synthetic Cutting Oil 1LOIL35 Transformer Non Conductive Oil 1LOIL1C Two Stroke SuperWW Oil 1L
Part No; Description; Size;
OIL28 Anti-Fling Chainsaw Oil 5LOIL43 Gear Oil 80W90 5LOIL48 Heavy Duty De-Greaser 5L502 51 19-05 Husqvarna Chainsaw Oil [Genuine] 5L
OIL37 Hydraulic Grade T15 Oil 5LOIL33A Hydraulic Grade T46b Oil 5LOIL38 Indigear 60/80 Ep68 Oil 5LOIL21 Sae 30 Engine Oil 5LOIL4 Soluble Semi-Synthetic Cutting Oil 5LOIL7 Two Stroke Oil 5L
OIL12 WD-40 Value Pack With Spray Bottle 5L
Part No; Description; Size;
OIL32C Fully Synthetic Engine Oil 10W40 20LOIL34 Hydraulic Grade T10 Oil 20L
OIL37A Hydraulic Grade T15 Oil 20LOIL42 Hydraulic Grade T32 Oil 20LOIL47 Hydraulic Grade T37 Oil 20LOIL33 Hydraulic Grade T46b Oil 20L
OIL32B Motor Oil 10W30 20LOIL24 Sae 30 Engine Oil 20LOIL32 Semi-Synthetic Engine Oil 10W40 20L
OIL32A Semi-Synthetic Engine Oil 15W40 20LOIL4B Soluble Semi-Synthetic Cutting Oil 20L
SPAR
ES34
SPARK PLUGS
Part Code Description
B2LM NGK SPARK PLUG B6HS NGK SPARK PLUG
B6S NGK SPARK PLUGBCPR5ES NGK SPARK PLUGBCPR6ES NGK SPARK PLUGBCPR7ES NGK SPARK PLUGBCR8ES NGK SPARK PLUGBKR5E NGK SPARK PLUG
BKR5EK NGK SPARK PLUGBM6A NGK SPARK PLUGBM7A NGK SPARK PLUG
BMR4A NGK SPARK PLUGBMR6A NGK SPARK PLUGBP5ES NGK SPARK PLUGBP6ES NGK SPARK PLUGBPM6A NGK SPARK PLUGBPM6F NGK SPARK PLUG
BPMR4A NGK SPARK PLUG
Part Code Name
BPMR6A NGK SPARK PLUGBPMR7A NGK SPARK PLUGBPMR8Y NGK SPARK PLUGBPR4ES NGK SPARK PLUGBPR5ES NGK SPARK PLUGBPR5HS NGK SPARK PLUGBPR6ES NGK SPARK PLUGBPR6HS NGK SPARK PLUGBR6HS NGK SPARK PLUGCMR4A NGK SPARK PLUGCMR5H NGK SPARK PLUGCMR6A NGK SPARK PLUGCMR6H NGK SPARK PLUGCMR7H NGK SPARK PLUGCR5HS NGK SPARK PLUG
CR5HSB NGK SPARK PLUGCR9EH9 NGK SPARK PLUG
Part Code Name
RCJ6Y CHAMPION SPARK PLUG
RCJ7Y CHAMPION SPARK PLUG
RCJ8 CHAMPION SPARK PLUG
RL86C CHAMPION SPARK PLUG
DRIVE BELTS
Truemeter Rail Measure Drive Belt
Part No; 102167-01
Kubota Rtv900 Wedge Drive Belt
Part No; 17594-97010
Husqvarna Drive Belt
Part No; 506 07 05-07
Part No; BELT02
Husqvarna K750, K760 Drive Belt [Non Oem]
Part No; BELT03
Stihl Ts410 Drive Belt[Non Oem]
Part No; BELT05
Timberwolf Drive Belt [Non Oem]
Part No; BELT06
Geismar Mp12 Drive Belt [Non Oem]
Part No; UKG00923
Geismar Mp12 Toothed Drive Belt [Non Oem]
Part No; UKG00923A
Husqvarna K650 Drive Belt [Non Oem]
SPAR
ES35
DRIVE BELTS
CUTTING DISCS AND GRINDING STONES
14” Inch Klingspor Rail Cutting Disc
Part No; KDISC14
16” Inch Klingspor Rail Cutting Disc
Part No; KDISC16
Rail Disc Carrying Bag
Part No; KDISCBAG
Part No; ADISCFROG
Replacement Geismar Mp12
Grinding Stone
Part No; MP12STONE
Cup Stone To Suit Geismar Mv3 Grinder
Part No; ADISCMV3
14” Inch Tyrolit Rail Cutting Disc
Part No; TDISC14
16” Inch Tyrolit
Rail Cutting Disc
Part No; TDISC16
Diamond Blade, Vacuum Brazed
400mm x 20mm Bore
Part No; DPVB
Replacement Geismar Mc3 Frog Stone
Upon Enquiry Other Disc / Cutting Stones May Be Sourced!
ABRA
SIVE
S36
CUTTING DISCS & GRINDING STONES
BATT
ERIE
S37
BATTERIES
Part No; Part Descritpion;400010 Varta Gel Filled Battery To Suit Wacker Plate D52508901 Varta 12V 8.6Ah Motorcycle BatteryBATT663 Energy 663 Greenmech Chipper 12V 110 Ah 680 CCA BatteryBATTI5 Varta Battery 15 Greenmech Chipper 12V 110Ah 680 CCAG2 Varta Battery G2 12V 20AhVARTA Varta Anti-Vibration, Anti-Spill 815 Cranking Amps, 50AhVARTA049 Tower Light Battery 45Ah 12V (MOSA 6000SX/GS)VARTA1 Varta Battery D24, 60Ah, 12VVARTA10 Varta D59 Battery 12V, 60Ah 540CCA Suits TL90 Light TowerVARTA3 Varta Battery Blue Dynamics E24, 70Ah, 12V Suits Mk4, TL90VARTA6 Varta Battery 12V, 44Ah (VTI Tower Light / Timberwolf Chippers) Tw4210VARTA8 Varta 508901 Battery 12V 8Ah 150AVARTA9 Varta Battery Heavy Duty Marine 140Ah 12VLANTBAT Lantern Battery NX Zinc 7Ah, 6VARCBAT Arcgen Battery Welder Gen 8Ah, 12V YTX9-BSEROSMC Mini Eros Board Early Warning Battery Only 700013 20 Watt Battery LightMCE1632 Battery Pack For Mini Eros Board4932451245 Milwaukee M18 9.0Ah Red Lithium-Ion Battery
Upon enquiry other batteries may be able to be sourced
PPE
38
GLOVES
Cut Level 5 Safety GlovesM, L, XL, XXL
Part No; CUT5GLOVES
Dipped Nitrile Grip GlovesL, XL
Part No; GLOVE41
Disposable Black Nitrile
Gloves M, L, XL
Part No; Disposable Black Nitrile Gloves
Part No; Disposable Blue Nitrile Gloves
Disposable Orange Nitrile
Grip Gloves M, L, XL
Part No; Disposable Orange Nitrile Grip Gloves
Disposable Powder Free Nitrile Gloves - Box Of 100
Part No; Disposable Powder Free Nitrile Gloves
Grey Pu Palm Coated Gloves. S, M, L, XL
Part No; GLOVE40
Palm Coated Orange Gloves
L, XL
Part No; Palm Coated Orange Gloves
Thermo Star GlovesM, L, XL
Part No; GLOVE39
Disposable Blue Nitrile Gloves S, M, L, XL
PPE
39
TRACK WORKERS PPE
Chainsaw Forestry Helmet
Part No; 562413
Chainsaw Safety Gaiters
Part No; RWCH005
Chainsaw Safety Gloves
(Large)
Part No; GLOVE8
Part No; NR011
Hi-Vis Quick Release
Rucksack
Part No; RSACKHIVISQR
Hi-Vis Orange Thinsulate Balaclava With Ear Mesh
Part No; THBOR
Cut Resistant Sleeves
Part No; SLEEVE
Pura-Fit Disposable
Earplugs 36Db - 20 Pairs
Part No; C23530
Red Ear Defenders
Part No; EARDEFEND
Hi-Vis Chainsaw Trousers (XL)
PPE
40
TRACK WORKERS PPE
Pura - Band Banded Ear Plugs 22DB (2PC)
Part No; C23520
16” Leather Gaiters / Spats
Part No; SPAT
60 Litre Heavy Duty Orange Nylon Kit Bag
Part No; KITBAG
Part No; 400095
Elasticated Safety Goggles
Part No; GOG1
Boston Safety Spectacles
Part No; BBBS
Florida Safety Spectacles With Grey Lens
Part No; BBFSS2GY
Pan View Clear Safety Spectacles
Part No; SAFESPEC
Uvex Silv-Air Valved Dust Mask Ffp3 (15 Pack)
Part No; MASK3
Blue Canvas Tool Bag
LIG
HTIN
G &
PO
WER
41
30W LUCIA LED LINK LIGHT
LUCIA LINK LIGHT
30W LUCIA LED LINK LIGHT
Part Code: 410000
Input Voltage:Input Frequency:Safety Level:Rated Power:Lamp Lumens:Colour:Angle:Working Temperature:Light IP Rating:Plug IP Rating:LED Lifetime:Size:Weight:
AC 100 - 240V50 - 60 HzClass 130W3600 Lumens6400K180 DegreesTemperature - 22°C / + 55°CIP67IP4430000 Hours64cm x 11cm x 6.5cm1.3kgAdditional ExtrasMast : 410024Basket : 410027
LIG
HTIN
G42
PLUGS & SOCKETS
110V 16Amp Plug
Part No; PLUG1
110V 16Amp Socket
Part No; PLUG2
110V 32Amp Plug
Part No; PLUG3
Part No; PLUG4
14M Extension Lead110V 16 AMP 1.5MM
Part No; EXTL14M15
14M Extension Lead110V 32 AMP 2.5MM
Part No; EXTL14M32AMP
1.5 Kva, 240V TO 110VDual Outlet Transformer
Part No; TRAN1
3.3 Kva, 240V TO 110VDual Outlet Transformer
Part No; TRAN2
4 Way Splitter Box 110V
Part No; SB1
110V 32Amp Socket
LIG
HTIN
G &
PO
WER
43
40W LED MAGNETIC WORK LIGHT
40W WORK LIGHTPower:Bulb Type:LED Life:
40W - 4000 Lumens16 x 3W Bridgelux LED50000H
Battery Type:Runtime:Charging Time:Input Voltage:Interface:Magnetic:Dimensions:Material:
7.4V / 13200mAh Rechargable Li-Ion Battery4 Hours [High Output Mode], 8 Hours [Low Output Mode]4 - 5 HoursAC: 100 - 240V / DC: 12 - 24VUSB Interface for Charging Devices4 PCS Strong N40 Magnetic Base160 x 139 x 311 mmAluminium, ABS, PC
4 Modes: 100% - 50% - SOS - Flashing
4 Power Indicator Lights: Battery Status:All Four Lights On:Red, Yellow and Green Lights On:Red and Yellow Lights On:Red Light On:Red Light Flashing:
100 - 75%75 - 50%50 - 25%25 - 5%< 5%
Supplied with Mains and Car Charger
40W LED RECHARGABLE AND MAGNETIC WORK LIGHT
Part Code: 260152
LIG
HTIN
G &
PO
WER
44
27W LED MAGNETIC WORK LIGHT
27W WORK LIGHTPower:Bulb Type:LED Life:
27W - 1800 Lumens9 x 3W Epistar LED50000H
Battery Type:Runtime:Charging Time:Input Voltage:Interface:Magnetic:Dimensions:Material:
7.4V / 8800mAh Li-Ion Rechargable Battery3 Hours [High Output Mode], 6 Hours [Low Output Mode]5 - 6 HoursAC: 100 - 240V / DC: 12 - 24VUSB Interface for Charging Devices4 PCS Strong N40 Magnetic Base130 x 110 x 210 mmAluminium, ABS, PC
4 Modes: 100% - 50% - SOS - Flashing
4 Power Indicator Lights: Battery Status:All Four Lights On:Red, Yellow and Green Lights On:Red and Yellow Lights On:Red Light On:Red Light Flashing:
100 - 75%75 - 50%50 - 25%25 - 5%< 5%
Supplied with Mains and Car Charger
27W LED RECHARGABLE AND MAGNETIC WORK LIGHT
Part Code: 260150
Price: £49.00
CLAM
PIN
G &
FASS
ETTA
S45
Emergency Serviceable G Clamp Are Only Available When In Stock
Suitable for Common Rail Profiles;95RBS BH/97.1/2 BH, 109/BS110A/BS113A FB, CEN60 E1/E2
New G Clamps Also Availble, Please Contact Us with Your Requirements
Part No; EGCSERV
We Supply A Wide Range Of New And Serviceable Fish Plates
Please Contact Us With Your Requirements
Emergency G - Clamp
Fishplates
CLAM
PIN
G &
FASS
ETTA
S46
FASSETTA CLAMPS AND BOLTS
Designed For Clamping Rail Joints, Broken And Defective Rails In Accordance With The Requirements Of Network Rail Specification.
For Use With Flat Bottom Profiles BR109, BS110A, BS113A Or 60EI (UIC60)
Maxim Torque; 350LB (460NM) - Do Not Overtighten(80LB & Underground Clamps Also Availble)
Used / Serviceable Fassetta Clamps Also Availble, Please Contact Us with Your Requirements
Part No; FASSCLAMP1
Fassetta Clamp
Fassetta Bolt
Part No; FASSETTA
Fassetta Bolt Complete With Nut And WasherMUST ONLY BE USED ONCE IN ACCORDANCE TO NETWORK RAIL STANDARDS
TRAC
K M
EASU
RIN
G
47
THERMOMETERS
Features;• Magnetic• Digital Readout• Displays Celsius or Fahrenheit • Range -50C to +70C (-58F to +158F)• Measures ambient and rail temperature• 3m lead allows reading to be taken
away from rail• Large, robust, rubber rail sensor (mag-
netic)• Clock function• Back light display
Part No; LTRT01
Features; • Magnetic mounting dial thermometer• Range -30C to +60C• Measures ambient and rail temperature
Part No; 0039066333
Digital Rail Thermometer
Analogue Rail Thermometer
TRAC
K M
EASU
RIN
G48
TRACK TRUMETERS
The Definitive tool for accurate meas-uring of rail track. This robust, quality product was designed with input from international railroad companies and is in daily use worldwide. The heavy duty measuring wheel incorporates metal side plates keeping the wheel stable on the rail
• Large Display Mechanical Counter• Adds and Subtracts in Reverse• Range 0 - 99999.9M or Yards• Range 0 - 99999’ 11”• Accuracy ± 1%
The Definitive tool for accurate meas-uring of rail track. This robust, quality product was designed with input from international railroad companies and is in daily use worldwide. The heavy duty measuring wheel incorporates metal side plates keeping the wheel stable on the rail
• Large Display Mechanical Counter• Adds and Subtracts in Reverse• Range 0 - 99999.9M or Yards• Range 0 - 99999’ 11”• Accuracy ± 1%
Single Track Trumeter Rail Measuring Wheel
Dual Track Trumeter Rail Measuring Wheel
Part No; 5063
Part No; 5061
WHE
EL B
ARRO
W49
INSULATED WHEEL BARROW
STEL’s INSULATED WHEEL BARROW
• Insulated Polyethylene wheelbarrow is rugged and non conductive making it ideal for Network Rail Railway use or for Utilities.
• Double skin oversized heavy duty bucket is extremely strong and holds upto six builders blocks.
• Insulated non conductive and non corrosive barrow.• Heavy Duty Double 6mm walls for durability.• Non metallic- one piece extra strong LLDPE moulding.• Reinforced long handles with grips (see pic 2) for manoeuvrability.• Extra strong tipping bar (pic 3).• 90 Litre/ 20 Gallon approx. capacity.• One pice construction. No bolt/ rivet stress points like traditional
barrows.• 400mm 4-ply pneumatic wheel.• 20 mm nylon rod axle for strength.• Weight (empty) 12 kg.• L 1540 x W 615 x H 620mm
Features;
Part No; STELBARROWPP
SMAL
L PL
ANT
50
LIFTING
LONDON UNDERGROUND SPECIFICFitted With Insulated Wheels With Nylon Platform Protectors
Width 1935mmLength 1085mmHeight 1410mmMass 148kg (with lifting equiment)Carriage Assembly 31kgBottom Beam 12kgBraked Frame 32kgUn-Braked Frame 30kgRail Storage Bracket 7kgYale Pul - Lift 15kgCamlok Rail Clamp 13kgLUL Rail Clamp 8kgPul - Lift to Rail Clamp Adaptor
1kg
Operation Limits Of Rail HandlerMaximum SWL 1500kgMaximum Track Cant 150 mmMaximum ground cross level when transporting
150 mm
Maximum unsupported rail overhang
3m
Maximum length of rail that can be handled
100m
Maximum gradient 1:27
Operation Limits Of Lifting EquipmentYale Pul - Lift 1500kgCamlok Rail Clamp 1000kgLUL Rail Clamp 1500kgPul - Lift Rail Clamp Adaptor 1500kg
Compliance:Machinery Directive 98/37/ECA certificate of Conformity is supplied with each Rail Handler.RIS-1701 and BSEN13977 (Where applicable). LUL Certificate No: PE007/1727
The measured Hand Arm Vibration (HAV) operator’s exposure is less than the 2.5ms-2 and therefore no related occupational health measures need to be undertaken. There is an uncertainty to the values stated if 50% Whole Body Vibration (WBV) is not applicable.
Part No ; IM1500LU(London Underground)
SMAL
L PL
ANT
51
LIFTING
Pos; Part No; Description; Qty;1 IMTBA Rail Handler Top Beam Assy 12 IMBLLU Braked Leg Assembly (LUL) 13 IMUBLLU Un-Braked Leg Assembly (LUL) 14 IMLBF Bottom Beam Fabrication 15 IMRCB Rail Carrier Assembly 1
SMAL
L PL
ANT
52
LIFTING
Top Beam Assembly
Pos; Part No; Description; Qty;1 IMTBFAB Top Beam Fabrication 12 IM026 Cross Drive Sprocket 13 IM027 Drive Shaft 14 FWR-M20 M20 Flat Washer Thick 35 IM028 Cross Drive Hand Wheel 16 IM029 Hand Wheel Spring 17 IM030 Guard Plate 18 FWR-M5 M5 Flat Washer 39 SC512BUT M5 x 12 Lg Button Skt Screw 3
10 IM031 Idler Shaft Assembly 111 IM032 Idler Shaft Spacer 112 IM033 Idler Sprocket Bush 113 IM034 Idler Sprocket 114 FWR-M16 M16 Flat Washer 115 NUT-M16 M16 Full Nut 216 IM035 Carriage Fabrication 117 IM036 Adjustment Screw 218 NUT-M10 M10 Full Nut 419 NYLOC_NUT-M12 M12 Nyloc Nut 420 FB1290 M12 x 90 Lg Bolt 421 FWR-M12 M12 Flat Washer 4
Pos; Part No; Description; Qty;22 IM037 Roller 223 6301_2Z Bearings 424 FB20100 M20 x 100 Lg Bolt 125 NYLOC-M20 M20 Nyloc Nut 126 IM038 1/2” Pitch Chain 3448mm Long 127 IM039 Sprocket Stop Screw 128 SELPIN655 ᴓ6 x 55 Lg Seloc Pin 129 SELPIN645 ᴓ6 x 45 Lg Seloc Pin 130 IM040 Nylon Washer 431 IM042 Bush 232 LLBNEW LED Light Bracket 233 FWR-M6 M6 Flat Washer 434 SC616BUT M6 x 16 Button Head Screw 435 REDLED LED Warning Light 236 IMLABEL01 Rail Handler Decal 800x50 237 IMLABEL02 Rail Handler Decal 330x35 238 IMLABEL03 Rail Handler Decal 100x100 SWL 1500KGs 239 IMLABEL04 Rail Handler Decal 125x30 31KGs 140 IMLABEL09 Rail Handler Serial Decal 85x50 141 SPLITL1_2 1/2” Pitch Split Link 242 IMLABEL12 Rail Handler Warning Decal 85x45 1
SMAL
L PL
ANT
53
LIFTING
24
1
23
9
87
8 10
15 14
425
5
6
21
20
12
18
1613
11
86
3 22 56
8
26
17
4
192
Pos; Part No; Description; Qty;1 IMBLFAB Braked Leg Fab’n 12 IM001 Axel Fab’n 23 FB1065 M10 x 65 Lg Bolt 24 FB1045 M10 x 45 Lg Bolt 45 FWR-M10 M10 Flat Washer 66 NYLOC_NUT-M10 M10 Nyloc Nut 87 IMBHFAB Brake Actuator Arm Assembly 18 FWR-M12 M12 Flat Washer 69 NUT-M12LOCK M12 Lock Nut 1
10 LOCNUT-M12 M12 Nyloc Nut 111 IMCAB01 Horizontal Brake Cable 112 FB1055 M10 x 55 Lg Bolt 213 IM053 Cable Pulley 114 LTB Turnbuckle Assembly 115 LTUB D Shackle Type B130 116 IMCAB02 Vertical Brake Cable 117 SELPIN538 ᴓ5 x 38 Lg Seloc Pin 218 IMLABEL05 Rail Handler Decal 125x30 33KGs 119 HRHW Hybrid Ironman Wheel 220 IMBSAN Brake Shoe Assembly Rail Handler 221 IMLABEL09 Rail Handler Serial Decal 80x45 122 IMBAFAB2 Brake Arm w/a LU 223 KR7052F Securing Ring 124 CD388 Plastic End Cap 225 IMLH Lifting Handle Fab’n 226 IMBSPR3 Ironman Brake Spring 64mm 2
7
11 10
89
6
4
5
21
3
Pos; Part No; Description; Qty;1 IMBLFAB Un Braked Leg Fab’n 12 IM001 Axel Fab’n 23 SELPIN538 5 x 38 Lg Seloc Pin 24 IMLABEL06 Rail Handler Decal 15 HRHW Hybrid Ironman Wheel 26 IMLABEL09 Rail Handler Serial Decal 17 KR7052F Securing Ring 18 IMLH Lifting Handle Fab’n 29 FB1045 M10 x 45 Lg Bolt 210 FWR-M10 M10 Flat Washer 211 NYLOC_NUT-M10 M10 Nyloc Nut 2
Braked Leg Assembly
Traverse Leg Assembly
SMAL
L PL
ANT
54
LIFTING
NETWORK RAIL SPECIFICFitted With Aluminium Wheels
Width 1935mmLength 1085mmHeight 1410mmMass 148kg (with lifting equiment)Carriage Assembly 31kgBottom Beam 12kgBraked Frame 32kgUn-Braked Frame 30kgRail Storage Bracket 7kgYale Pul - Lift 15kgCamlok Rail Clamp 13kgLUL Rail Clamp 8kgPul - Lift to Rail Clamp Adaptor
1kg
Operation Limits Of Rail HandlerMaximum SWL 1500kgMaximum Track Cant 150 mmMaximum ground cross level when transporting
150 mm
Maximum unsupported rail overhang 3mMaximum length of rail that can be handled
100m
Maximum gradient 1:27
Operation Limits Of Lifting EquipmentYale Pul - Lift 1500kgCamlok Rail Clamp 1000kgLUL Rail Clamp 1500kgPul - Lift Rail Clamp Adaptor 1500kg
Compliance:Machinery Directive 98/37/ECA certificate of Conformity is supplied with each Rail Handler.RIS-1701 and BSEN13977 (Where applicable). LUL Certificate No: PE007/1727
The measured Hand Arm Vibration (HAV) operator’s exposure is less than the 2.5ms-2 and therefore no related occupational health measures need to be undertaken. There is an uncertainty to the values stated if 50% Whole Body Vibration (WBV) is not applicable.
Part No ; IM1500NWR(Network Rail)
SMAL
L PL
ANT
55
LIFTING
3
1
5
4
2
Pos; Part No; Description; Qty;
1 IMTBA Rail Handler Top Beam Assy 12 IMBLLU Braked Leg Assembly (NWR) 13 IMUBLLU Un-Braked Leg Assembly (NWR) 14 IMLBF Bottom Beam Fabrication 15 IMRCB Rail Carrier Assembly 1
SMAL
L PL
ANT
56
LIFTING
Pos; Part No; Description; Qty;1 IMTBFAB Top Beam Fabrication 12 IM026 Cross Drive Sprocket 13 IM027 Drive Shaft 14 FWR-M20 M20 Flat Washer Thick 35 IM028 Cross Drive Hand Wheel 16 IM029 Hand Wheel Spring 17 IM030 Guard Plate 18 FWR-M5 M5 Flat Washer 39 SC512BUT M5 x 12 Lg Button Skt Screw 3
10 IM031 Idler Shaft Assembly 111 IM032 Idler Shaft Spacer 112 IM033 Idler Sprocket Bush 113 IM034 Idler Sprocket 114 FWR-M16 M16 Flat Washer 115 NUT-M16 M16 Full Nut 216 IM035 Carriage Fabrication 117 IM036 Adjustment Screw 218 NUT-M10 M10 Full Nut 419 NYLOC_NUT-M12 M12 Nyloc Nut 420 FB1290 M12 x 90 Lg Bolt 421 FWR-M12 M12 Flat Washer 4
Pos; Part No; Description; Qty;22 IM037 Roller 223 6301_2Z Bearings 424 FB20100 M20 x 100 Lg Bolt 125 NYLOC-M20 M20 Nyloc Nut 126 IM038 1/2” Pitch Chain 3448mm Long 127 IM039 Sprocket Stop Screw 128 SELPIN655 ᴓ6 x 55 Lg Seloc Pin 129 SELPIN645 ᴓ6 x 45 Lg Seloc Pin 130 IM040 Nylon Washer 431 IM042 Bush 232 LLBNEW LED Light Bracket 233 FWR-M6 M6 Flat Washer 434 SC616BUT M6 x 16 Button Head Screw 435 REDLED LED Warning Light 236 IMLABEL01 Rail Handler Decal 800x50 237 IMLABEL02 Rail Handler Decal 330x35 238 IMLABEL03 Rail Handler Decal 100x100 SWL 1500KGs 239 IMLABEL04 Rail Handler Decal 125x30 31KGs 140 IMLABEL09 Rail Handler Serial Decal 85x50 141 SPLITL1_2 1/2” Pitch Split Link 242 IMLABEL12 Rail Handler Warning Decal 85x45 1
Top Beam Assembly
SMAL
L PL
ANT
57
LIFTING
320 18
1
7
626
5
109
827
11
16
15
9
19
4
28
26
7521
1714 13
12911
2322
24
25
63
54
2
1 8
7
9
Pos; Part No; Description; Qty;1 IMBLFAB Braked Leg Fab’n 12 IMBSAN Brake Shoe Assembly Rail Handler 23 IM001 Axle Fab’n 24 FB1065 M10 x 65 Lg Bolt 25 FB1045 M10 x 45 Lg Bolt 46 FWR-M10 M10 Flat Washer 67 NYLOC_NUT-M10 M10 Nyloc Nut 68 IMBHFAB Brake Actuator Arm Assembly 19 FWR-M12 M12 Flat Washer 410 NUT-M12LOCK M12 Lock Nut 111 LOCNUT-M12 M12 Nyloc Nut 312 IMCAB01 Horizontal Brake Cable 113 FB1055 M10 x 55 Lg Bolt 214 IM053 Cable Pulley 115 LTB Turnbuckle Assembly 116 LTUB D Shackle Type B130 117 IMCAB02 Vertical Brake Cable 118 SELPIN538 ᴓ5 x 38 Lg Seloc Pin 219 IMLABEL05 Rail Handler Decal 125x30 33KGs 120 IM003 Wheel Assembly 221 IM057 Brake Arm w/a NWR 222 LBSA Brake Spring Adjuster 223 IMBSPR3 Ironman Brake Spring 64mm 224 FWR-M12-BZP M12 Flat Washer 225 NYLOC_NUT-M12 M12 Nyloc Nut 226 IMLH Lifting Handle Fab’n 227 CD388 Plastic End Cap 228 IMLABEL09 Rail Handler Serial Decal 80x45 1
Pos; Part No; Description; Qty;1 IMTLFAB Un-Braked Leg Fab’n 12 IM001 Axle Fab’n 23 IMLH Lifting Handle Fab’n 24 NYLOC_NUT-M10 M10 Nyloc Nut 25 FWR-M10 M10 Flat Washer 26 FB1045 M10 x 45 Lg Bolt 27 IM003 Wheel Assembly 28 SELPIN538 ᴓ5 x 38 Lg Seloc Pin 29 IMLABEL06 Rail Handler Decal 125x30 27KGs 1
Traverse Leg Assembly
Braked Leg Assembly
SMAL
L PL
ANT
58
B - TYPE TROLLEY
Compliance;In accordance with the following directive(s):-
Machinery Directive 2006/41/EC.Directive 93/68/EEC CE Marking.
BS EN 13977:2011: Railway application - Track - Safety requirements for portable machines and trolleys for construction and mainte-nance.
RIS 1701 PLT: Rail Industry Standard for Port-able and Transportable Plant Used for Infra-structure Work.
Cop0018: Code of Practice for Rail Mounted Manually Propelled Equipment.
LUL Certificate No: PR007/1729.
Operation Limits
Maximum SWL outside UK - 2000kgMaximum SWL in UK - 1000kg
Width 1876mmLength 1689.5mmHeight 335mm (without
brake and push handles fitted
Mass 135kg
Part No ; BT1000LU(London Underground Rail)
LONDON UNDERGROUND SPECIFICFitted With Insulated Aluminium Wheels And Aluminum Deck
SMAL
L PL
ANT
59
LIFTING
33 67
3513
16
1031
22 19 2021
2324
31
26
25
18
6 34
58
1232
431
281514
3013
35910
3311
3
2 29 1330
117 30
27
B - Type Split Trolley Assembly
SMAL
L PL
ANT
60
B - TYPE TROLLEY
Pos; Part No; Description; Qty;1 800010 Chassis, Female 12 800011 Chassis, Male 13 WHEEL2 Insulated Wheel 4
4 & 28 BTTAP Aluminium Deck 25 BTBSSTEL Brake Shoe 26 FWR-M10 M10 Flat Washer 87 NYLOC_NUT-M10 M10 Nylock Nut 48 800008 Pivot Member 29 LBSY Brake Spring 210 LBSA Brake Spring Adjuster 211 800005 Wheel Axle 412 800006 Adjuster 213 NYLOC_NUT-M8 M8 Nylock Nut 2014 NYLOC_NUT-M12 M12 Nylock Nut 215 FWR-M12 M12 Flat Washer 216 NUT-M8LOCK M8 Lock Nut 217 BTPB Push Bar 418 BTBBDC Brake Bar 119 LLBNEW Light Bracket 220 REDLED Led Light 221 SC616BUT M6 X 16 Button Head Screw 422 SELPIN525 5Mm Ø X 25Mm Selloc Pin 223 STLABEL05 B Type Label, Split Trolley Decal, Lifting Point 424 STLABEL03 B Type Label, Split Trolley Decal, 175Mm X 30Mm 225 STLABEL02 B Type Label, Split Trolley Decal, 85Mm X 50 126 STLABEL04 B Type Label, Split Trolley Decal, 85Mm X 50Mm 227 STLABEL01 B Type Label, Split Trolley Decal, 350Mm X 30Mm 229 M8 X 30MM C/S M8 X 25Mm Counter Sunk Screw, Aluminium Top Only 1230 FWR-M8 M8 Flat Washer 1831 NUT-M12LOCK M12 Lock Nut 432 BTBCSTEL Brake Cable 233 FB1060 M10 X 60Mm Bolt 234 FB1075 M10 X 75Mm Bolt 235 800034 M8 X 50Mm Bolt 436 SELPIN540 5Mm Ø X 40Mm Selloc Pin 4
STEL518 Pin & Chain Connector63022RS Wheel Bearing
WHEEL2BUSH Wheel Insulating Bush
B - Type Split Trolley Parts List
SMAL
L PL
ANT
61
B - TYPE TROLLEY
Compliance;In accordance with the following directive(s):-
Machinery Directive 2006/41/EC.Directive 93/68/EEC CE Marking.
BS EN 13977:2011: Railway application - Track - Safety requirements for portable machines and trolleys for construction and mainte-nance.
RIS 1701 PLT: Rail Industry Standard for Port-able and Transportable Plant Used for Infra-structure Work.
Cop0018: Code of Practice for Rail Mounted Manually Propelled Equipment.
NWR Certificate No: PA05/05770.
Part No ; BT1000NWR(Network Rail)
Width 1876mmLength 1689.5mmHeight 335mm (without
brake and push handles fitted
Mass 135kg
Operation Limits
Maximum SWL outside UK - 2000kgMaximum SWL in UK - 1000kg
NETWORK RAIL SPECIFICFitted With Aluminium Wheels And Wooden Deck
SMAL
L PL
ANT
63
B - TYPE TROLLEY
Pos; Part Number; Description; Qty;1 800010 Chassis, Female 12 800011 Chassis, Male 13 BTBSSTEL Brake Shoe 24 FWR-M10 M10 Flat Washer 85 NYLOC_NUT-M10 M10 Nyloc Nut 46 800008 Pivot Member 27 LBSY Brake Spring 28 LBSA Brake Spring Adjuster 29 800005 Wheel Axle 4
10 800006 Adjuster 211 NYLOC_NUT-M8 M8 Nyloc Nut 2012 NYLOC_NUT-M12 M12 Nylock Nut 213 FWR-M12 M12 Flat Washer 214 NUT-M8 LOCK M8 Lock Nut 415 BTPB Push Bar 116 BTBBDC Brake Bar 117 SC616BUT M6 X 16 Button Head Screw 418 SELPIN525 5Mm Ø X 25Mm Selloc Pin 219 STLABEL05 B Type Label, Split Trolley Decal, Lifting Point 420 STLABEL03 B Type Label, Split Trolley Decal, 175Mm X 30Mm 221 STLABEL02 B Type Label, Split Trolley Decal, 85Mm X 50 122 STLABEL04 B Type Label, Split Trolley Decal, 85Mm X 50Mm 223 STLABEL01 B Type Label, Split Trolley Decal, 350Mm X 30Mm 224 FWR-M8 M8 Flat Washer 1825 NUT-M12LOCK M12 Lock Nut 426 BTBCSTEL Brake Cable 227 FB1060 M10 X 60Mm Bolt 228 FB1075 M10 X 75Mm Bolt 229 800034 M8 X 50Mm Bolt 430 WHEEL1 Un-Insulated Wheel (Nwr) 431 BTTWP Wooden Top (Nwr) 132 SELPIN540 5Mm Ø X 40Mm Selloc Pin 434 LLBNEW Light Bracket 235 REDLED Led Light 237 F21B Big Head Fasteners 16
B - Type Split Trolley Parts List
SMAL
L PL
ANT
64
LINK TROLLEY LONDON UNDERGROUND SPECIFICFitted With Insulated Aluminium Wheels And Aluminum Deck
Compliance;In accordance with the following directive(s):-
Machinery Directive 2006/41/EC.Directive 93/68/EEC CE Marking.
BS EN 13977:2011: Railway application - Track - Safety requirements for portable machines and trolleys for construction and maintenance.
RIS 1701 PLT: Rail Industry Standard for Porta-ble and Transportable Plant Used for Infrastruc-ture Work.
Cop0018: Code of Practice for Rail Mounted Manually Propelled Equipment.
LUL Certificate No: PR007/1728
Part No ; LT1000LU(London Underground)
Width 1675mmLength 750mmHeight 218mm (without
brake and push handles fitted)
Mass 48kg
Operation LimitsMaximum SWL outside UK - 1250kg
Maximum SWL in UK - 1000kgMaximum total SWL for two linked trolleys -
2000kgAll loads must be uniformly distributed and
positioned about the trolley centre line
SMAL
L PL
ANT
66
LINK TROLLEY
Pos; Part Number; Description; Qty;1 LINK-CHASMOD Link Trolley Chassis; Modified 12 LINK-BBCL Brake Actuator 23 LBSY Brake Spring Yellow 24 FWR-M10 M10 Flat Washer 25 NYLOC_NUT-M10 M10 Nyloc Nut 26 LBSSTELIRON Brake Shoe Link Trolley 27 LBSA Brake Spring Adjuster 28 NUT-M12LOCK M12 Lock Nut 29 FB845 M8 X 45 Lg Bolt 2
10 FWR-M8 M8 Flt Washer 811 NYLOC_NUT-M8 M8 Nyloc Nut 812 LTB Turn Buckle Assembly 113 LTUB D Shackle Type B130 214 LTTAS Aluminium 5 Bar Top 115 BTBP Trolley Push Bar 116 LBHLU Brake Bar 617 SC620CSK M6 X 20Lg C.sunk Screw 119 WHEEL3 Link Trolley, Insulated Wheel, Stel 420 LLBNEW Red Light Bracket 221 REDLED Led Warning Light 222 800028 Link Trolley Axle 423 SELPIN1_8X1 Seloc Pin 1/8X1” Lg 424 SC820CSK M8 X 20 Lg C.sunk Screw 625 CP620 6 X 20 Lg Clevis Pin 426 COT120 1 X 20 Lg Cotter Pin 427 LTLABEL01 Link Trolley Decal 330 X 35 228 STLABEL03 Split Trolley Decal 175X30 229 LTLABEL02 Link Trolley Decal 85 X 50 130 LTLABEL04 Link Trolley Serial Decal 85 X 50 131 LTBC Link Trollley Brake Cable 132 TAPEREFLECT Reflective White Tape 55Mm X 100Mm 4
Link Trolley Parts List
SMAL
L PL
ANT
67
LINK TROLLEY
Compliance;In accordance with the following directive(s):-
Machinery Directive 2006/41/EC.Directive 93/68/EEC CE Marking.
BS EN 13977:2011: Railway application - Track - Safety requirements for portable machines and trolleys for construction and mainte-nance.
RIS 1701 PLT: Rail Industry Standard for Port-able and Transportable Plant Used for Infra-structure Work.
Cop0018: Code of Practice for Rail Mounted Manually Propelled Equipment.
Network Rail Certificate No: PA05/05769
Part No ; LT1000NWR(Network Rail)
Width 1675mmLength 750mmHeight 218mm (without
brake and push handles fitted)
Mass 52kgOperation Limits
Maximum SWL outside UK - 1250kgMaximum SWL in UK - 1000kg
Maximum total SWL for two linked trolleys - 2000kg
All loads must be uniformly distributed and positioned about the trolley centre line
NETWORK RAIL SPECIFICFitted With Aluminium Wheels And Wooden Deck
Pos; Part No; Description; Qty;1 LINK-CHAS Link Trolley Chassis 12 LINK-BBCL Brake Actuator 23 LBSY Brake Spring Yellow 24 FWR-M10 M10 Flat Washer 25 NYLOC_NUT-M10 M10 Nyloc Nut 26 LBSSTELIRON Brake Shoe Link Trolley 27 LBSA Brake Spring Adjuster 28 NUT-M12LOCK M12 Lock Nut 29 FB845 M8 X 45 Lg Bolt 2
10 FWR-M8 M8 Flat Washer 1211 NYLOC_NUT-M8 M8 Nyloc Nut 212 LTB Turnbuckle Assembly 113 LTUB D Shackle Type B130 214 LTTWS Plywood Top 115 SC620CSK M6x20lg C.sunk Screw 417 WHEEL4 Link Trolley Wheel (Un-Ins) 418 LLBNEW Led Light Bracket 219 REDLED Led Warning Light 220 800028 Link Trolley Axle 421 SELPIN1_8x1 Seloc Pin 1/8X1” Lg 422 CP620 Ø6x20lg Clevis Pin 423 LTLABEL01 Link Trolley Decal 330X35 224 STLABEL03 Split Trolley Decal 175X30 225 LTLABEL02 Link Trolley Decal 85X50 126 LTLABEL04 Link Trolley Serial Decal 85X50 127 LTBC Link Trolley Brake Cable 128 BTPB Push Bar 129 LBHLU Brake Bar (Lul) 130 BW-061806 G Clip 431 FB812 M8x12lg Bolt Bzp 1032 F21B M8 Bighead Fastener 10
TAPEREFLECT Reflective White Tape 55Mm X 100Mm 4
SMAL
L PL
ANT
69
LINK TROLLEYLink Trolley Parts List
SMAL
L PL
ANT
70
TROLLEY RAMPS
The STEL Trolley Ramps are designed to be used to load and unload the “B” Type Trolley with heavy cargo unsuitable for lifting, or small vehicles with wheels/tracks.
Width 355mm
Length 2000mm
Height(unfolded legs)
545mm
Height(folded legs)
150mm
Mass 35kg
Operation Limits
Maximum SWL 1000kg (per ramp)All loads must be uniformly distributed and posi-
tioned about the ramp centre line.
Compliance:• In accordance with the following Directive(s):-• Machinery Directive 2006/41/EC• Directive 93/68/EEC CE Marking• RIS 1701 PLT Rail Industry Standard for Portable and Transportable
Plant Used for Infrastructure Work.• Network Rail Certificate of Acceptance - PA05/05889
Trolley RampsFitted With Aluminium Tread Plate
Part No; RAMP
SMAL
L PL
ANT
71
SKATE BASKET
NETWORK RAIL AND LONDON UNDERGROUND SPECIFICFitted With Nylon Wheels
• Minimum Space Required in Vehicle• Support Arm Works as Stabiliser during Loading and Unloading• Reduce potential injury and fatigue to operator• Safe and efficient method of transporting tools and smaller plant equipment to worksite• Doesn’t have any influence on axel counters, even when they are not correctly adjusted (set over height)
Network Rail Certificate Of Acceptance; PA05/05918Network Rail Cat no; 094/021170London Underground Certificate Of Acceptance; PE/007/1733
Part No; SBC
Width 360 mm Length 870 mmHeight 190mm (without push handles fitted)Height 820mm (with push handles fitted)Weight 13.6kg (without push handles fitted)Weight 17.8kg (with push handles fitted)Safe Working Load (NWR Spec) 250kgSafe Working Load (LU Spec) 75kg
Reference TitleBS EN 13977:2011 Railway application - Track -
Safety requirements for portable machines and Skate Baskets for construction and maintenance.
RIS 1701 PLT Rail Industry Standard for Porta-ble and Transportable Plant Used for Infrastructure Work.
SMAL
L PL
ANT
72
SKATE BASKET
LONDON UNDERGROUND SPECIFIC
10
6
6
11 128
91
7
4
5
2
3
Pos; Part No; Description; Qty;1 SBC-FR-LU Skate Basket Chassis (LU) 12 SBC-08 Skate Basket Roller 23 6302-2RS Bearing 44 SPIN2-20 2 x 20Lg Split Pin 25 FWR-M16 M16 Flat Washer 26 SBC-HAN-LU Skate Basket Handle 27 SBC-AXLE Skate Basket Axle 28 SBC-LABEL01 Skate Basket Decal
330x302
9 SBC-LABEL03 SWL 75kg Label 150x30 210 SBC-LABEL02 Owner Label 150x30 111 SBC-LABEL04 Skate Basket Serial Label
85x501
12 NTD-LABEL Next Test Due Label 150x30
1
SMAL
L PL
ANT
73
SKATE BASKET
NETWORK RAIL SPECIFIC
6
6
8
91
1011
7
4
5
2
3
Pos; Part No; Description; Qty;1 SBC-FR-LU Skate Basket Chassis
(LU)1
2 SBC-08 Skate Basket Roller 23 6302-2RS Bearing 44 SPIN2-20 2 x 20 Lg Split Pin 25 FWR-M16 M16 Flat Washer 26 SBC-HAN-LU Skate Basket Handle 27 SBC-AXLE Skate Basket Axle 28 SBC-LABEL01 Skate Basket Decal 29 SBC-LABEL03 SWL 250kg Label 210 SBC-LABEL04 Skate Basket Serial
Label 1
11 NTD-LABEL Next Test Due Label 1
SMAL
L PL
ANT
74
IMPACT WRENCHES
Overall DimensionWithout Damper
Length 680mm (28”)Height 338mm (13”)Width 390mm (15”)
With DamperLength 680mm (28”)Height 346mm (13”Width 390mm (15”)
VibrationUnloaded
Without Damper 8.9 m/S2With Damper 2.3m/S2
LoadedWithout Damper 19m/S2With Damper 11.6m/S2
Part No; GT350GES
Engine Type Two Stroke, Forced, Air
Cooled, Single CylinderDisplacement 46.5cc 43x32mm (inner bore
size x stroke)Fuel Tank Capacity 1 LitreFuel Mixture Ratio 25:1 (gasoline:2 cycle oil)Revolution (idling) 2700rpm +- 250Revolution (loaded, impact)
7120rpm
Revolution (non loaded, max)
9880rpm
Ignition ElectronicSpark Plug Type NGK BPMR6ACarburetor Diaphragm
Impact Square Driver Size 25.4mm (1″)Fastening Torque Range
1700 N.m (full throttle:1255 ft.lbf)950 N.m (half throttle:701 ft.lbf)
Free Speed 1200rpm
Vessel GT350 Low Vibration Model
SMAL
L PL
ANT
75
IMPACT WRENCHES
Vessel GT350 Standard Model
Overall DimensionWithout Damper
Length 680mm (28”)Height 338mm (13”)Width 390mm (15”)
With DamperLength 680mm (28”)Height 346mm (13”Width 390mm (15”)
Impact Square Driver Size 25.4mm (1″)Fastening Torque Range
1700 N.m (full throttle:1255 ft.lbf)950 N.m (half throttle:701 ft.lbf)
Free Speed 1200rpm
Engine Type Two Stroke, Forced, Air
Cooled, Single CylinderDisplacement 46.5cc 43x32mm (inner
bore size x stroke)Fuel Tank Capacity 1 LitreFuel Mixture Ratio 25:1 (gasoline:2 cycle oil)Revolution (idling) 2700rpm +- 250Revolution (loaded, impact)
7120rpm
Revolution (non load-ed, max)
9880rpm
Ignition ElectronicSpark Plug Type NGK BPMR6ACarburetor Diaphragm
VibrationUnloaded
Without Damper 8.9 m/S2With Damper 2.3m/S2
LoadedWithout Damper 19m/S2With Damper 11.6m/S2
Part No; GT350GE
SMAL
L PL
ANT
76
RAIL SAW
Husqvarna K1270R Rail Saw
EngineOutput Power 5.8 kWCylinder Displacement 118.8 cm³Electrode Gap 0.5 mmCylinders 1Number of Strokes 2-stroke engine
DimensionsProduct size length 730 mmProduct size width 243 mmProduct size height 434 mmWeight 13.3 kg
VibrationsVibrations left/front handle 6.9 m/s²Vibrations right/rear handle 6.3 m/s²
Cutting EquipmentCutting Depth, Max 118 mmBlade Diameter, Max 350 mmArbor Diameter 20/25,4 mmBlade Thickness, Max 5 mmPeripheral Speed, Max 90 m/s
Sound and NoiseSound power level, guaranteed (LWA)
117 dB(A)
Sound pressure level at operators ear
104 dB(A)
The K1270 16” saw package also includes the supply of a FOC 16” diameter genuine Husqvarna high perfor-mance diamond blade suitable for cutting concrete.
* Active Air Filtration increases life of filters by 3-5 times
* SmartCarb ensures high power is retained
* EasyStart provides 50% easier starts
* New magnesium blade guard - lighter in weight for an improved power-to-weight ratio
* Reduced wear thanks to the drive belt with fully sealed transmission, which keeps out the cutting dust
SMAL
L PL
ANT
77
CHAINSAW
Stihl MS261CM Chainsaw
The Stihl MS 261 C-M is a lightweight and powerful, professional chainsaw. It has an electric self-tuning engine management system which means that the fuel supply is electronically controlled so the machine automatically adapts to operating conditions, ensuring optimal performance at all times. It has a memory function which will remember previous operat-ing conditions and allows you to restart quickly after an extended break.
Standard features;
• STIHL M-Tronic• HD2 filter• Reduced-emission engine technology• Advanced combustion technology• Pre-separation air filtration system• Anti-vibration system• Carburettor heating• STIHL ElastoStart• Tool free filler caps• Compensator• Ematic chain lubrication system• Side chain tensioner
Technical DataDisplacement cm³ 50.2Weight kg 5.2Power-to-weight ratio kg/kW 1.79Power output kW/bhp 2.9/3.9Recomm. max. bar length cm 45Vibration levels left/right m/s² 2) 3.5/3.5Sound power level dB(A) 3) 116Sound pressure level dB(A) 4) 104.0
The 2-MIX technology ensures you can get up to 20% less fuel consumption and a 50% emissions reduction compared to other two-stroke engines that do not have 2-mix technology. This saw comes with an easy-clean HD2 filter, controlled delivery oil pump and other features such as a stainless steel muffer, captive nuts on the sprocket cover and monocoque cover with three quick release fasteners.
SMAL
L PL
ANT
78
CHAINSAW
The Husqvarna 560XP professional petrol chainsaw from Husqvarna has an amazing design and is packed with product enhancing features such as AutoTune X-Torq engine with Rev-Boost and magnesium crankcase.
It has been designed with the professional forester in mind and it delivers outstanding, effi-cient power, guaranteed! The unique X-Torq engine technology provides more power where it is needed, up to 20% less fuel consumption and 75% less exhaust emissions. RevBoost provides instant high chain speed for extra efficient de-limbing. AutoTune gives optimal en-gine performance throughout with automatic engine setting when engine conditions change during use. No more time spent adjusting carburettors, AutoTune compensates for different fuels, altitude, humidity, temperature and clogging air filters.
Standard features;
• X-Torq• AutoTune• RevBoost• Air Injection
Technical DataEngine Type 2-Stroke Air Cooled X-Torq – RevBoostWeight Kg 5.8Power Output Kw/Bhp 3.5kW / 4.7hpNoise Level In Db(A) / Lwa 118Fuel Tank Capacity 0.65 LitVibrations Front Handle: 2.7m/s² Rear Handle: 3.2m/s²Fuel Type Unleaded Petrol Oil Mix 50: 1Engine Displacement Cc 59.8
Husqvarna 560XP Chainsaw
SMAL
L PL
ANT
79
CHAINSAW CHAINS
Part Code Description21BPX064E Oregon Chainsaw Chain, 15”, 64 Links @ 0.32521LPX064E Oregon Chainsaw Chain, 15”, 64 Links @ 0.32522LPX067E Oregon Chainsaw Chain, 16” Suits Ms26122LPX62E Oregon Chainsaw Chain, 15”, Suits Ms261
95VPX064E Oregon Chainsaw Chain, 15”, @ 0.325M75LPX066E Oregon Chainsaw Chain, 3/8” X 1.6Mm, 66 Links
Part Code Description3616 000 0050 Stihl Chainsaw Chain, 14”, 50 Links, 1.3Mm X 3/8” Pitch3621 000 0056 Stihl Chainsaw Chain, 15”, 56 Links, 1.6Mm3621 000 0066 Stihl Chainsaw Chain, 16”, Suits Ms362c3621 003 0056 Stihl Chainsaw Chain, 15”, Suits Ms361, Ms290, Ms2913636 000 0055 Stihl Chainsaw Chain, 16”, 55 Links, Suits Ms210, Ms2303636 003 0050 Stihl Chainsaw Chain, 14”, Suits Ms1813639 003 0062 Stihl Chainsaw Chain, 15”, Suits Ms260, Ms2613639 003 0067 Stihl Chainsaw Chain, 16”, Suits Ms260, Ms2613652 003 0056 Stihl Chainsaw Chain, 15”, Suits Ms2903667 000 0067 Stihl Tungston Tipped Chainsaw Chain, 16”, 67 Links3670 000 0064 Stihl Chainsaw Chain, 12”, Suits Ht101, Ms150t3943 000 0060 Stihl Tungston Tipped Chainsaw Chain4242 710 6001 Stihl Chainsaw Chain, 22”, Suits Hs46
Part Code Description501 84 04-64 Husqvarna Chainsaw Chain, 15”, 64 Links, Suits 550Xp501 84 06-64 Husqvarna Chainsaw Chain, 15”, Suits H30, 445501 84 06-72 Husqvarna Chainsaw Chain, Suits H30505 51 34-53 Husqvarna Chainsaw Chain, 15”, 64 Links, Suits 353, 325505 51 34-55 Husqvarna Chainsaw Chain, Suits 2165
Part Code Description958492656 Makita Chainsaw Chain, 16”, 56 Links
MAK14CHAIN Makita Chainsaw Chain, 16”, 52 Links
Upon Enquiry Different Size Chains May Be Available / Able To Be Sourced
SMAL
L PL
ANT
80
CHAINSAW GUIDE BARS
Part Code Description3003 000 5306 Stihl Guide Bar, 13”, Suits Ms261
3003 000 6811 Stihl Guide Bar, 15”, Suits Ms261
3003 000 6813 Stihl Guide Bar, 16”, Suits Ms261
3003 008 6817 Stihl Guide Bar, 18”, Suits Ms261
3005 000 4809 Stihl Guide Bar, 14” Rollomatic
3005 000 4813 Stihl Guide Bar, 16”, Suits 023
Part Code Description508 92 61-64 Husqvarna Guide Bar, 15”, Suits 350, 445
585 94 33-64 Husqvarna Guide Bar, 15”, Suits 346Xp
585 95 08-56 Husqvarna Guide Bar, 15”, Suits 365
SMAL
L PL
ANT
81
BERNARD ENGINE
Bernard Engine Technical InformationRotation Anti Clockwise (Outlet Side)Compression Centrifugal Mechaninc TypeGovernor System Centrifugal Mechaninc TypeStarting System Recoil StarterAir Cleaner Dual Element (Moss and CartridegeDisplacement 213 cm3Compression Rate 8,0;1Cylinder Bore x Stroke 73 x 51 MMMax, Output Power 7 Hp - 4000RpmMax, Torque 1,4 Kgm - 3200 RpmFuel Consumption 312 G/KwhOil Capcity 0.7 LitresDimensions L x W x H 275 x 350 x 365MM
Bernard Engine Compatable With The Geismar MP12 Profile Grinder
The MP12 Frame Not Included!
Part No; 2115006
SMAL
L PL
ANT
82
BERNARD ENGINE SPARES
Bernard Engine 211-5006
Ignition Coil
Part No; 18111050
Bernard Engine 211-5006
Piston Ring Set 73Ø
Part No; 21102030
Bernard Engine 211-5006
Carburettor
Part No; 21504410
Part No; 21506360
Bernard Engine 211-5006
Complete Gasket Set
Part No; 21102030
Bernard Engine 211-5006
Runner Mounting
Part No; 21506360
Bernard Engine 211-5006
Inlet Gasket
Part No; 181050090
Bernard Engine 211-5006Kit Repair
Part No; 18109040
Bernard Engine 211-5006
Spark Plug Cap
Part No; 18111020
Bernard Engine 211-5006
Recoil Starter
SMAL
L PL
ANT
83
GENERATORS
Harrington Generators2.4kW (3 kVA) Network Rail Approved
Engine SpecificationModel Honda GX160Starting System RecoilSpeed 3000rpmFuel Tank Capacity 11ltrRun Time (75% Load) 9 HoursCooling System Forced Air Cooled
Sockets SpecificationStandard 2 x 16AmpOptional Configuration 1 x 16/1 x 32 AmpVoltages 110VoltsFrequency 50HzRated Output 2.4kW (3.0kVA)
Part No; HPR24-RAIL-S
Rail Specific Generator With Genuine Honda GX200 Engine And Sincro AlternatorOutput - 2 x 16 Amp 110v Sockets
SMAL
L PL
ANT
84
GENERATORS
Stephill Generators2.7 kVA / 2.2 kW Network Rail Approved
Engine SpecificationEngine Honda GX160
Emissions Certified N/ACylinders SingleDistrubution O.H.VAspiration Normally AspiratedCooling Air Displacement 163 cm³Rpm 3000Starting system RecoilFuel Unleaded
Generator SpecificationVoltage 110V (55V/55V) CTE
Phase 1Frequency 50Hz Prime Power (PRP) 2.7 kVA / 2.2 kWAspiration Normally AspiratedAlternator NSM K100CAlternator Type Brushless - Smooth
WaveformFuel tank capacity 11.0 LitresAutonomy 75% load 11.0 HoursLWA 95dBA @ 7M 70
Part No; GENNY1
SMAL
L PL
ANT
85
GENERATORS
Stephill Generators2.7kW / 3.4 kVA Network Rail Approved
Generator SpecificationVoltage 110V (55V/55V) CTE
Phase 1Frequency 50Hz Prime Power (PRP) 3.4 kVA / 2.7 kWAspiration Normally AspiratedAlternator NSM K1000DAlternator Type Brushless - Smooth
WaveformFuel tank capacity 11.0 LitresAutonomy 75% load 9.1 HoursLWA 96dBA @ 7M 71
Engine SpecificationEngine Honda GX160
Emissions Certified N/ACylinders SingleDistrubution O.H.VAspiration Normally AspiratedCooling Air Displacement 193 cm³Rpm 3000Starting system RecoilFuel Unleaded
Part No; GENNY
SMAL
L PL
ANT
86
DUST SUPPRESSION WATER BOTTLE & PUMP BOTTLE
Complete Water Bottle14 Ltr Capacity
Part No; 71800
Water Hose 3/8” PVC 4 Metres
Part No; 71806
Water Bottle Hose Nut Fitting
Part No; 71810
Part No; 71811
Hose Connector 1/2” Quick Release External Auto Stop
Part No; 71815
Hose Connector 1/2” Quick Release Internal Auto Stop
Part No; 71816
Water Bottle Pump (Black)
Part No; 71820
Water Bottle Pressure Valve (Black)
Part No; 71821
Water Bottle Hose Nipple Fitting
Pump Bottle To Fit STEL’s Rail Drill & Cembre
Rail Drill 5Ltr Complete
Part No; PUMPBC
SMAL
L PL
ANT
89
MAGIC WAND
MAGNETIC SWARF COLLECTOR
MAGNETIC SWARF COLLECTOR
Part No: MAGICWAND
Magnetic Retrieving Batons are Innovative and Powerful Tools to Remove Ferrous Materials in Wet or Dry Environments
Key Features:Magnetic Retrieving Baton with ReleaseNon-Corrosive Stainless SteelIdeal for Removing Hardware from Storage BinsClean Water or Degreasing Tanks of Metal ShavingsUnique Shape Allows for Easy Pick Up from Walls and CornersConstructed with Neodymium / Rare Earth Magnets to Maximise Holding PowerPull to Release Collected Materials to Dispose Of
Use of Safety Goggles and Gloves is Highly Recommended when Using This Item
Fabricating in Steel can be a Messy Business, We Have the Perfect Tool to Quickly Clean Up Your Metal Shavings and Scrap Pieces. Simply Wave the Magnetic Stick Over the Metal Shavings to Pick Them Up, Carry Them Over to Your Scrap Barrel, Pull The Plunger and The Shavings are Neatly Disposited. The Cyclones Magnet is Strong Enough to Quickly Clean Up Your Biggest Mess of Metal Shavings.
Easy to Pick up Components, Nuts, Bolts, Nails & PinsEasy Way of Picking Up Metals from Sawdust
Length: 400mmMax Pick-Up: 0.5 KG
SMAL
L PL
ANT
90
TRACK MAGNET
TRACK MAGNET KEY YARDENE
STANDARD STRENGTH TRACK MAGNET - YELLOW
Part No; YTMK
Part No; TRACMAGYEL
SMAL
L PL
ANT
91
YALE D85 PULL LIFT
Yale D85 Pull Lift
Features• Graphite cast iron load sheave• Hand lever made of malleable cast iron or
tubular steel model with rubber grip• Automatically acting load pressure brake• Free chaining device optional• Drop forged load and suspension hooks• Asbestos-free friction discs
Yale Hand Lever Hoists are versatile, portable units for pulling, tensioning, lashing and lifting loads. The opera-tion of the Hand Lever Hoists is easy and safe. Light weight, robust malleable cast iron model, free chaining, slip clutch, stamped steel - or aluminium housing, low operating effort - in the Yale product range you will always find an optimal hoist for every type of operation.
The brake system of all Yale hand lever hoists are based on the original Yale patent of the British Engineer Thom-as A Weston dating back to 1875. All parts of the load brake are made of high quality materials and are protect-ed against corrosion.
The graphite cast iron load sheave for the link chain has precision machined chain pockets for accurate fit and durability of the load chain. The roller chain sprocket is made from heat treated chromium-molybdenum steel with precision machine teeth to ensure smooth chain movement.
Every Yale ratchet lever hoist is factory tested with over-load. The units are supplied with a test certificate show-ing the serial-No. Operating instructions which contain an EC declaration of conformity are also attached to each unit.
Part No; D85
SMAL
L PL
ANT
93
YALE D85 PULL LIFT
Pos; Part No; Description; Qty;1-2+5-6 0106208 Housing Assy 12 0105930 Bushing 15 0105020 Brake pawl spring pin 16 9105005 Cyl. screw 27* 0108287 Brake pawl 18* 0105019 Brake pawl spring 19 0103205 Fitting piece 110-13 0106209 Housing cover assy 111 0102503 Bushing 112 0105930 Bushing 113 9105010 Cyl. screw 214 0107487 Name plate 115 9128008 Grooved nail 416 0103146 Drive pinion 117 0111017 Spacer 118 0106254 Bolt 120 0103806 Gear 121 9134028 Locking sleeve 222 9134003 Locking sleeve 223 0103895 Disc hub 124 0108500 Friction disc, asbestos-free 225 0105075 Ratchet disc 126 0101028 Ratchet 127 0106001 Load brake cover 128 9104116 Screw 529-35 0105969 Hand lever assy 129 0105939 Hand lever, 443 mm 130 0102135 Pawl rod lever 1
Pos; Part No; Description; Qty;31 0102136 Lever rod pin 132 0102131 Bushing 133 0102132 Lever pawl spring 134 0102134 Ratchet rod pin 135 0102133 Ratchet pawl 136 0102037 Hand wheel 137 0102038 Check washer 138 9123018 Tooth washer 139 9115059 Hex. nut 140-43 0100916 Hook assy 241-43 0106371 Safety latch kit 246 0106048 Swivel tube 165 0108251 Brake pawl spring 166 0107660 Lever head 167 0107666 Ratchet rod 168 0107730 Tube 169 9134094 Locking sleeve 170 0108351 Plug 171 0246418 Grip 172 0108787 Rubber grip lever, cpl 173-76 0108247 Hook, cpl. (from 1992) 274-76 0109081 Safety latch kit 2
D85 Parts List
SMAL
L PL
ANT
94
YALE D85 PULL LIFT
Pos; Part No; Description; Qty;40-43,46, 57 0100365 Bottom Block Assy 155 0105900 Sprocket Wheel 156 0105917 Stripper 157 0100382 Swivel Half 258-59 0106233 Chain Stop Assy 158 0105914 Chain StopWW 159 0105986 Chain Bolt 160 0105588 Chain Washer 261 0105986 Chain Bolt 163 1245700 Load Chain, (Specify Length)58-62 1205956 Load Chain, Length 1,73 M 164 0106079 Chain Lock 1
Parts For Model D85 With Roller Chain Only
Pos; Part No; Description; Qty;40-43 + 46-48 0100311 Bottom block assy 144 0103805 Load sheave 145 0105697 Stripper 148 0100173 Swivel half 249-52 0104640 Chain stop assy 149 0104631 Chain stop half 250 9102103 Cyl. screw 151 9122032 Lockwasher 152 9115014 Hex. nut 153 1607645 Load chain zinc coat.
(specify length)
Parts For Model D85 With Link Chain Only
SMAL
L PL
ANT
95
WILLIAM HACKETT L5 LEVER HOIST
William Hackett L5 Lever Hoist
The Hackett WH-L5 lever hoist meets and ex-ceeds the requirements of international standards BS EN13157:2004 + AI:2009, ASME B30.21-2014, AS1418.2-1997, SANS 1636:2-2007. Lever hoists can be used within an operating temperature range of -40°C to +55°C.
Features • Range: 800Kg To 10 Tonnes.• Light Load Capability: The Wh-L5 Is Tested
And Certified At 2% Of The Lever Hoist Rated Capacity.
• Safety Latches: Wh-L5 Lever Hoist Top And Bottom Hooks Are Fitted With Heavy Duty Cast Steel Latches Creating A Strong And Ro-bust Hook Closure.
• Overload Indicator Marks: Wh-L5 Lever Hoist Top And Bottom Hooks Have, As Part Of The Hook Forging, An Overload Indicator Mark Either Side Of The Hook Throat. By Measuring The Distance Between The Indicator Marks, The Hook Can Be Quickly And Easily Checked To See If Any Stretch Has Occurred Due To Misuse Or Overloading.
• Overload Limiter: Available As An Option Upon Request.
• Hook Housing: Wh-L4 Lever Hoist Top And Bottom Hook Housing Are Secured With Socket Head Cap Screws/Hex Head Bolts And Nyloc Insert Locking Nuts.
• Fleeting/Cross Hauling: Wh-L5 Lever Hoists Are Tested And Certified For Fleeting Or Cross Hauling Applications Up To 45° From The Vertical Without Deration.
LSM
ALL
PLAN
T97
WILLIAM HACKETT L5 LEVER HOIST
Pos; Part No; Description;1 L5.01 Gear cover2 L5.02 Pinion gear3 L5.03 Pinion shaft4 L5.04 Load gear5 L5.05 Gear side plate assembly6 L5.06 Bearing7 L5.07 Load sheave8 L5.08 Chain guide9 L5.09 Chain stripper10 L5.10 Lever Side plate assembly11 L5.11 Pawl spring12 L5.12 Pawl13 L5.13 Circlip14 L5.14 Disc Hub15 L5.15 Ratchet gear c/w discs16 L5.16 Brake cover assembly17 L5.17 Nyloc Nut19 L5.19 Nyloc Nut20 L5.20 Change gear20L L5.20L Load limiter21 L5.21 Change over pawl22 L5.22 Change over stand23 L5.23 Change over spring
Pos; Part No; Description;24 L5.24 Handle assembly24A L5.24A Rubber handle25 L5.25 Screw25A L5.25A Washer26 L5.26 Cam27 L5.27 Spring28 L5.28 Grip ring29 L5.29 Spring30 L5.30 Spring housing31 L5.31 Castle nut32 L5.32 Split pin34 L5.34 Label35 L5.35 Lock nut36 L5.36 Chain fixing pin37 L5.37 Latch kit38 L5.38 Bottom hook assembly39 L5.39 Top hook shaft40 L5.40 Top hook assembly41 L5.41 End stop (cast enlarged)42 L5.42 Washer47 L5.47 Chain fixing pin48 L5.48 Nut50 L5.50 Rubber handle nut50A L5.50A Rubber handle bolt
William Hackett L5 Lever Hoist Parts List
SMAL
L PL
ANT
98
LIFTINGING & CLAMPS
Bag Lifter - 1 Tonne
Part No; BAGLIFT
Part No; CR1000
150LB Conductor Rail Clamp
Part No; CRCL
U69 Check Rail Clamp
Part No; U69CRC
Universal Rail Clamp
Part No ; URC
Features• The Bag Lifter - 900mm to 970mm 1000kg SWL• The bag lifter is designed to lift and transport large bags
safely and securely.• Manufactured as a 4 point spreader beam in a fixed frame,
the construction incorporates 4 hooks with safety latches allowing fast and efficient loading and unloading.
• The bag lifter is suitable for bags 900mm to 970mm wide and can hold a maximum weight of 1 tonne.
Features• The CR Rail clamps are designed to lift single rails securely
and safely. The clamp is designed to fit most types of rail section sizes currently in use.
• The clamp has a narrow profile to enable attachment to an individual rail that is stacked side by side with other rails. The clamp is locked onto the rail-head via a lever operated spring mechanism.
• It is recommended to use clamps suspended from a lifting beam for long rail lengths.
Camlok Lifting Clamp
INDEX BY PRODUCTABRASIVES
14” Inch Klingspor Rail Cutting Disc...................................................14” Inch Tyrolit Rail Cutting Disc........................................................16” Inch Klingspor Rail Cutting Disc...................................................16” Inch Tyrolit Rail Cutting Disc........................................................Cup Stone To Suit Geismar Mv3 Grinder............................................Diamond Blade, Vacuum Brazed 400mm x 200mm Bore..................Rail Disc Carrying Bag.........................................................................Replacement Geismar Mc3 Frog Stone..............................................Replacement Geismar Mp12 Grinding Stone.....................................
363636363636363636
BREAKERS18” Long Chisel (3”)..........................................................................300mm/12”........................................................................................380mm/ 15”.......................................................................................380mm/ 15”.......................................................................................450mm/ 18”.......................................................................................450mm/ 18”.......................................................................................Asphalt Cutter.....................................................................................Clay Spade..........................................................................................Tamping Pad.......................................................................................Tamping Shank....................................................................................Tarmac Cutter......................................................................................Tie Tamper..........................................................................................
171717171717171717171717AUGERS
10mm x 240mm to suit Maxim Auger Attachment............................ 10mm x 290mm Geismar Type..........................................................10mm x 320mm to suit Cembre Sleeper Drill....................................11mm x 240mm to suit Maxim Auger Attachment............................12mm x 240mm to suit Maxim Auger Attachment............................12mm x 320mm to suit Cembre Sleeper Drill....................................13mm x 240mm to suit Maxim Auger Attachment............................13mm x 320mm to suit Cembre Sleeper Drill....................................16mm x 240mm to suit Maxim Auger Attachment............................16mm x 290mm Geismar Type..........................................................16mm x 320mm to suit Cembre Sleeper Drill....................................17mm x 240mm to suit Maxim Auger Attachment............................17mm x 320mm to suit Cembre Sleeper Drill....................................18mm x 240mm to suit Maxim Auger Attachment............................18mm x 320mm to suit Cembre Sleeper Drill....................................19mm x 240mm to suit Maxim Auger Attachment............................19mm x 290mm Geismar Type..........................................................19mm x 320mm to suit Cembre Sleeper Drill....................................21mm x 240mm to suit Maxim Auger Attachment............................21mm x 320mm to suit Cembre Sleeper Drill....................................22mm x 240mm to suit Maxim Auger Attachment............................22mm x 320mm to suit Cembre Sleeper Drill....................................
16161616161616161616161616161616161616161616
BATTERIESVarta Gel Filled Battery o Suit Wacker Plated52................................Varta 12V 8.6Ah Motorcycle Battery.................................................Energy 663 Greenmech Chipper 12V 110Ah 680 CCA Battery...........Varta Battery 15 Greenmech Chipper12V 110Ah 680 CCA................Varta Battery G2 12V 20Ah................................................................Varta Anti-Vibration Anti-Spill 815 Cranking Amps 50Ah...................Tower Light Battery 45Ah 12V (MOSA 6000SX/GS)............................Varta Battery D24, 60Ah, 12V.............................................................Varta D59 Battery 12V, 60Ah 540CCA Suits TL90 Light Tower............Varta Battery Blue Dynamics E24, 70Ah, 12V Suits Mk4, TL90..........Varta Battery 12V, 44Ah (VTI Tower Light / Timberwolf Chippers) ...Varta 508901 Battery 12V 8Ah 150A.................................................Varta Battery Heavy Duty Marine 140Ah 12V....................................Lantern Battery NX Zinc 7Ah, 6V........................................................Arcgen Battery Welder Gen 8Ah, 12V YTX9-BS..................................Mini Eros Board Early Warning Battery Only......................................20 Watt Battery Light..........................................................................Battery Pack For Mini Eros Board.......................................................M18 9.0Ah Red Lithium-Ion Battery...................................................Lantbat...............................................................................................
3737373737373737373737373737373737373730
CUTTERSPilot Pin Long.....................................................................................Pilot Pin Short.....................................................................................Rotabroach M42 Rail Cutter Long Series 13mm................................Rotabroach M42 Rail Cutter Long Series 15mm................................Rotabroach M42 Rail Cutter Long Series 19mm................................Rotabroach M42 Rail Cutter Long Series 20mm................................Rotabroach M42 Rail Cutter Long Series 21mm................................Rotabroach M42 Rail Cutter Long Series 22mm................................Rotabroach M42 Rail Cutter Long Series 24mm................................Rotabroach M42 Rail Cutter Long Series 25mm................................Rotabroach M42 Rail Cutter Long Series 26mm................................Rotabroach M42 Rail Cutter Long Series 28mm................................Rotabroach M42 Rail Cutter Long Series 30mm................................Rotabroach M42 Rail Cutter Long Series 32mm................................Rotabroach M42 Rail Cutter Long Series 34mm................................Rotabroach M42 Rail Cutter Short Series 13.5mm............................Rotabroach M42 Rail Cutter Short Series 13mm...............................Rotabroach M42 Rail Cutter Short Series 14mm...............................Rotabroach M42 Rail Cutter Short Series 15mm...............................Rotabroach M42 Rail Cutter Short Series 17mm...............................Rotabroach M42 Rail Cutter Short Series 18mm...............................Rotabroach M42 Rail Cutter Short Series 19mm...............................Rotabroach M42 Rail Cutter Short Series 20mm...............................Rotabroach M42 Rail Cutter Short Series 21mm...............................Rotabroach M42 Rail Cutter Short Series 22mm...............................Rotabroach M42 Rail Cutter Short Series 24mm...............................Rotabroach M42 Rail Cutter Short Series 25mm...............................Rotabroach M42 Rail Cutter Short Series 26mm...............................Rotabroach M42 Rail Cutter Short Series 27mm...............................Rotabroach M42 Rail Cutter Short Series 28mm...............................Rotabroach M42 Rail Cutter Short Series 29mm...............................Rotabroach M42 Rail Cutter Short Series 30mm...............................Rotabroach M42 Rail Cutter Short Series 31mm...............................Rotabroach M42 Rail Cutter Short Series 32mm...............................Rotabroach M42 Rail Cutter Short Series 33mm...............................Rotabroach M42 Rail Cutter Short Series 34mm...............................Rotabroach M42 Rail Cutter Short Series 36mm...............................Rotabroach TCT Rail Cutter Long Series 19mm..................................Rotabroach TCT Rail Cutter Long Series 22mm..................................Rotabroach TCT Rail Cutter Long Series 26mm..................................Rotabroach TCT Rail Cutter Extra Long Series 26mm.........................Rotabroach TCT Rail Cutter Long Series 27mm..................................Rotabroach TCT Rail Cutter Long Series 28mm..................................Rotabroach TCT Rail Cutter Extra Long Series 28mm.........................
1414141415151515151515151515151515151515151515151515151515151515151515151515151515151515
Rotabroach TCT Rail Cutter Long Series 30mm..................................Rotabroach TCT Rail Cutter Long Series 32mm..................................Rotabroach TCT Rail Cutter Short Series 13.5mm..............................Rotabroach TCT Rail Cutter Short Series 17mm.................................Rotabroach TCT Rail Cutter Short Series 19mm.................................Rotabroach TCT Rail Cutter Short Series 20mm.................................Rotabroach TCT Rail Cutter Short Series 21mm.................................Rotabroach TCT Rail Cutter Short Series 22mm.................................Rotabroach TCT Rail Cutter Short Series 24mm.................................Rotabroach TCT Rail Cutter Short Series 26mm.................................Rotabroach TCT Rail Cutter Short Series 28mm.................................Rotabroach TCT Rail Cutter Short Series 30mm.................................Rotabroach TCT Rail Cutter Short Series 32mm.................................Rotabroach TCT Rail Cutter Short Series 34mm.................................STEL M42 Rail Cutter Long Series 12mm.........................................STEL M42 Rail Cutter Long Series 13mm.........................................STEL M42 Rail Cutter Long Series 14mm.........................................STEL M42 Rail Cutter Long Series 15mm.........................................STEL M42 Rail Cutter Long Series 16mm.........................................STEL M42 Rail Cutter Long Series 17mm.........................................STEL M42 Rail Cutter Long Series 18mm.........................................STEL M42 Rail Cutter Long Series 19mm.........................................STEL M42 Rail Cutter Long Series 20mm.........................................STEL M42 Rail Cutter Long Series 21mm.........................................STEL M42 Rail Cutter Long Series 22mm.........................................STEL M42 Rail Cutter Long Series 23mm.........................................STEL M42 Rail Cutter Long Series 24mm.........................................STEL M42 Rail Cutter Long Series 25mm.........................................STEL M42 Rail Cutter Long Series 26mm.........................................STEL M42 Rail Cutter Long Series 27mm.........................................STEL M42 Rail Cutter Long Series 28mm.........................................STEL M42 Rail Cutter Long Series 29mm.........................................STEL M42 Rail Cutter Long Series 30mm.........................................STEL M42 Rail Cutter Long Series 31mm.........................................STEL M42 Rail Cutter Long Series 32mm.........................................STEL M42 Rail Cutter Long Series 33mm.........................................STEL M42 Rail Cutter Long Series 34mm.........................................STEL M42 Rail Cutter Long Series 35mm.........................................STEL M42 Rail Cutter Long Series 36mm.........................................STEL M42 Rail Cutter Long Series 37mm.........................................STEL M42 Rail Cutter Short Series 12mm........................................STEL M42 Rail Cutter Short Series 13mm........................................STEL M42 Rail Cutter Short Series 14mm........................................STEL M42 Rail Cutter Short Series 15mm........................................STEL M42 Rail Cutter Short Series 16mm........................................STEL M42 Rail Cutter Short Series 17mm........................................STEL M42 Rail Cutter Short Series 18mm........................................STEL M42 Rail Cutter Short Series 19mm........................................STEL M42 Rail Cutter Short Series 20mm........................................STEL M42 Rail Cutter Short Series 21mm........................................STEL M42 Rail Cutter Short Series 22mm........................................STEL M42 Rail Cutter Short Series 23mm........................................STEL M42 Rail Cutter Short Series 24mm........................................STEL M42 Rail Cutter Short Series 25mm........................................STEL M42 Rail Cutter Short Series 26mm........................................STEL M42 Rail Cutter Short Series 27mm........................................STEL M42 Rail Cutter Short Series 28mm........................................STEL M42 Rail Cutter Short Series 29mm........................................STEL M42 Rail Cutter Short Series 30mm........................................STEL M42 Rail Cutter Short Series 31mm........................................STEL M42 Rail Cutter Short Series 32mm........................................STEL M42 Rail Cutter Short Series 33mm........................................STEL M42 Rail Cutter Short Series 34mm........................................STEL M42 Rail Cutter Short Series 35mm........................................STEL M42 Rail Cutter Short Series 36mm........................................STEL M42 Rail Cutter Short Series 37mm........................................STEL TCT Rail Cutter Short Series 19mm..........................................STEL TCT Rail Cutter Short Series 22mm..........................................
1515151515151515151515151515141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414141414
CLAMPS & FISHPLATES Emergency G - Clamp.........................................................................Fassetta Bolt.......................................................................................Fassetta Clamp....................................................................................Fishplates............................................................................................
45464645
FUEL MANAGEMENT10 Litre Jerry Can Black.......................................................................10 Litre Jerry Can Green.....................................................................10 Litre Jerry Can Red........................................................................10 Litre Jerry Can Yellow.....................................................................10 Litre Jerry Can, Explosion Proof.....................................................10 Litre Screw Top Jerry Can Green....................................................10 Litre Screw Top Jerry Can Red.......................................................10 Litre Screw Top Jerry Can Yellow....................................................10 Ltr Plastic Container C/W Cap.......................................................20 Litre Jerry Can Black.......................................................................20 Litre Jerry Can Blue.......................................................................20 Litre Jerry Can Green.....................................................................20 Litre Jerry Can Red........................................................................20 Litre Jerry Can Yellow.....................................................................20 Ltr Plastic Container C/W Cap.......................................................5 Litre Jerry Can Black.........................................................................5 Litre Jerry Can Green.......................................................................5 Litre Jerry Can Red..........................................................................5 Litre Jerry Can Yellow.......................................................................5 Litre Jerry Can, Explosion Proof.......................................................5 Litre Plastic Jerry Can Black.............................................................5 Litre Plastic Jerry Can Green............................................................5 Litre Plastic Jerry Can Red...............................................................5 Ltr Plastic Container C/W Cap.........................................................Jerry Can Flexible Spout Black............................................................Jerry Can Flexible Spout Green...........................................................Jerry Can Flexible Spout Red..............................................................Jerry Can Flexible Spout Yellow..........................................................Jerry Can Rigid Spout Black................................................................Jerry Can Rigid Spout Green...............................................................Jerry Can Rigid Spout Red..................................................................Jerry Can Rigid Spout Yellow...............................................................No Spill Fuel Spout Black....................................................................No Spill Fuel Spout Green...................................................................No Spill Fuel Spout Yellow...................................................................
21,2321,2321,2321,23
2521,2321,2321,23
2521,23
2321,2321,2321,23
2522,23
22222222222424252424252424242424252525
LIGHTING1.5 Kva, 240V TO 110V Dual Outlet Transformer................................110V 16Amp Plug...............................................................................110V 16Amp Socket............................................................................110V 32Amp Plug...............................................................................110V 32Amp Socket............................................................................14M Extension Lead 110V 16 AMP 1.5MM.......................................14M Extension Lead 110V 32 AMP 2.5MM.......................................27W Led Rechargable And Magnetic Work Light...............................3.3 Kva, 240V TO 110V Dual Outlet Transformer................................4 Way Splitter Box 110V.....................................................................40W Led Rechargable And Magnetic Work Light...............................Lucia Link Light....................................................................................
424242424242424442424341
CUTTERS CUTTERSSTEL TCT Rail Cutter Short Series 22mm............................................STEL TCT Rail Cutter Short Series 23mm............................................STEL TCT Rail Cutter Short Series 25mm............................................STEL TCT Rail Cutter Short Series 26mm............................................STEL TCT Rail Cutter Short Series 28mm............................................STEL TCT Rail Cutter Short Series 33mm............................................
141414141414
OILS3 In 1 High Performance Lubricant.....................................................3 In 1 Oil Drip Applicator.....................................................................3 In 1 Penetrant Spray.........................................................................3 In 1 Ptfe Aerosol Spray.....................................................................3 In 1 Silicone Lubricant......................................................................3 In 1 Spray..........................................................................................Anti-Fling Chainsaw Oil......................................................................Force Chain Lube Spray [6 Pk]............................................................Force Penetrating Fluid [6 Pk]............................................................Fully Synthetic Engine Oil 10W40......................................................Gear Oil 80W90..................................................................................Heavy Duty De-Greaser.......................................................................Husqvarna Chainsaw Oil [Genuine]....................................................Hydraulic Grade T10 Oil.....................................................................Hydraulic Grade T15 Oil.....................................................................Hydraulic Grade T15 Oil.....................................................................Hydraulic Grade T32 Oil.....................................................................Hydraulic Grade T37 Oil.....................................................................Hydraulic Grade T46b Oil...................................................................Hydraulic Grade T46b Oil...................................................................Indigear 60/80 Ep68 Oil.....................................................................Motor Oil 10W30...............................................................................Sae 30 Engine Oil...............................................................................Semi-Synthetic Cutting Oil.................................................................Semi-Synthetic Engine Oil 10W40......................................................Semi-Synthetic Engine Oil 15W40......................................................Soluble Semi-Synthetic Cutting Oil.....................................................Transformer Non Conductive Oil........................................................Two Stroke Fully Synthetic Oil............................................................Two Stroke Oil....................................................................................Two Stroke Semi-Synthetic Oil...........................................................Two Stroke SuperWW Oil...................................................................WD- 40 Spray......................................................................................
PPE
333333333333333333333333333333333333333333333333333333333333333333
Chainsaw Forestry Helmet.................................................................16” Leather Gaiters / Spats................................................................60 Litre Heavy Duty Orange Nylon Kit Bag.........................................Blue Canvas Tool Bag.........................................................................Boston Safety Spectacles....................................................................Chainsaw Safety Gaiters.....................................................................Chainsaw Safety Gloves (Large)..........................................................Cut 5 Safety Gloves M, L, XL, XXL.......................................................Cut Resistant Sleeves..........................................................................Dipped Nitrile Grip Gloves L, XL.........................................................Disposable Black Nitrile Gloves M, L, XL............................................Disposable Blue Nitrile Gloves S, M, L, XL..........................................Disposable Orange Nitrile Grip Gloves M, L, XL.................................Disposable Powder Free Nitrile Gloves - Box Of 100..........................Elasticated Safety Goggles..................................................................Florida Safety Spectacles With Grey Lens..........................................Grey Pu Palm Coated Gloves. S, M, L, XL............................................Hi-Vis Chainsaw Trousers (XL)............................................................Pura Ear Buds.....................................................................................Uvex Sulv Air Dust Mask....................................................................
3940404040493938393838383838404038394040
39393840393938
Hi-Vis Orange Thinsulate Balaclava With Ear Mesh...........................Hi-Vis Quick Release Rucksack............................................................Palm Coated Orange Gloves L, XL......................................................Pan View Clear Safety Spectacles.......................................................Pura-Fit Disposable Earplugs 36Db - 20 Pairs.....................................Red Ear Defenders..............................................................................Thermo Star Gloves M, L, XL..............................................................
SIGNAGEAmber Led Warning Light...................................................................Amber Lense Kit For Mk11 Marker Board ( C/W Fasteners)..............Battery Pack Plastic Case Only For Mini Eros Board...........................Blue Led Warning Light.......................................................................Bullseye Temporary Speed Restriction Board 560mm x 300mm.......Bullseye Temporary Speed Restriction Board 800mm x 300mm.......Cancelling Indicator Board 390mm x 390mm....................................Directional Indicator Board 390mm x 390mm...................................Early Warning Mini Eros Board...........................................................Early Warning Mini Eros Board Free Standing....................................Lantern Battery...................................................................................Led Mk11 Marker Board.....................................................................Led Possession Limit Board................................................................Led Stop Possession Limit Board........................................................Led Stop Possession Limit Board With Rail Clamp.............................Mce Compact Worksite Marker Board...............................................MCE Eros Battery Pack.......................................................................Mk11 Marker Board Label - Engineers Supervisors Area Red...........Mk11 Marker Board Label - PICOP Amber..........................................Mk11 Marker Board Pcb Assembly Bottom.......................................Mk11 Marker Board Possession Limit Board Switch Assembly..........Mk11 Marker Board Thief Proof Bolt M6 x 91mm.............................Non Conductor Board Post 50mm x 50mm x 1800mm......................Red Led Warning Light........................................................................Red Lense Kit For Mk11 Marker Board ( C/W Fasteners)...................Repeater Warning Temporary Speed Board 560mm x 660mm..........Spate Indicator Board 390mm x 390mm...........................................Speed Board, 5 Mph, 390mm X 390mm..........................................Speed Board, 10 Mph, 390mm X 390mm........................................Speed Board, 15 Mph, 390mm X 390mm........................................Speed Board, 20 Mph, 390mm X 390mm..........................................Speed Board, 25 Mph, 390mm X 390mm..........................................Speed Board, 30 Mph, 390mm X 390mm..........................................Speed Board, 35 Mph, 390mm X 390mm..........................................Speed Board, 40 Mph, 390mm X 390mm..........................................Speed Board, 45 Mph, 390mm X 390mm..........................................Speed Board, 50 Mph, 390mm X 390mm..........................................Speed Board, 55 Mph, 390mm X 390mm..........................................Speed Board, 60 Mph, 390mm X 390mm..........................................Speed Board, 65 Mph, 390mm X 390mm..........................................Speed Board, 70 Mph, 390mm X 390mm..........................................Speed Board, 75 Mph, 390mm X 390mm..........................................Speed Board, 80 Mph, 390mm X 390mm..........................................Speed Board, 85 Mph, 390mm X 390mm..........................................Speed Board, 90 Mph, 390mm X 390mm..........................................Speed Board, 95 Mph, 390mm X 390mm..........................................Speed Board, 100 Mph, 390mm X 390mm........................................Speed Board, 125 Mph, 390mm X 390mm........................................Temporary Speed Restriction Board 390mm x 390mm......................Termination Indicator Board 390mm x 390mm.................................Tildawn Light, Blue Lens, Solid And Flashing......................................Tildawn Light, Red Lens, Solid And Flashing.......................................Tilldawn Light, Red Solid Comes Fitted With A Rail Clamp.................
3032313029292929313130313232323131323231313129303229292828282828282828282828282828282828282828282929303030
PPE
SMALL PLANTBERNARD ENGINE...............................................................................Bernard Engine 211-5006 Carburettor..............................................Bernard Engine 211-5006 Ignition Coil.............................................Bernard Engine 211-5006 Kit Repair..................................................Bernard Engine 211-5006 Piston Ring Set 73Ø.................................Bernard Engine 211-5006 Complete Gasket Set................................Bernard Engine 211-5006 Inlet Gasket...............................................Bernard Engine 211-5006 Recoil Starter.............................................Bernard Engine 211-5006 Runner Mounting.....................................Bernard Engine 211-5006 Spark Plug Cap..........................................Cembre Rail Drill Pump Bottle 5Ltr Complete....................................Complete Water Bottle.......................................................................Harrington Generators 2.4kW (3 kVA)...............................................Hose Connector 1/2” Quick Release External Auto Stop...................Hose Connector 1/2” Quick Release Internal Auto Stop....................Husqvarna 560 XP Chainsaw .............................................................Husqvarna Chainsaw Chain, 15”, 64 Links, Suits 353, 325.................Husqvarna Chainsaw Chain, 15”, 64 Links, Suits 550Xp.....................Husqvarna Chainsaw Chain, 15”, Suits H30, 445................................Husqvarna Chainsaw Chain, Suits 2165.............................................Husqvarna Chainsaw Chain, Suits H30...............................................Husqvarna Guide Bar, 15”, Suits 346Xp..............................................Husqvarna Guide Bar, 15”, Suits 350, 445..........................................Husqvarna Guide Bar, 15”, Suits 365..................................................Husqvarna K1270R Rail Saw ..............................................................Impact Wrench Vessel Low Vibration.................................................Impact Wrench Vessel Standard Model............................................Ironman London Undergound............................................................Ironman Network Rail........................................................................Link Trolley London Underground .....................................................Link Trolley Network Rail ...................................................................Makita Chainsaw Chain, 16”, 52 Links................................................Makita Chainsaw Chain, 16”, 56 Links................................................Oregon Chainsaw Chain, 15”, @ 0.325..............................................Oregon Chainsaw Chain, 15”, 64 Links @ 0.325.................................Oregon Chainsaw Chain, 15”, 64 Links @ 0.325.................................Oregon Chainsaw Chain, 15”, Suits Ms261........................................Oregon Chainsaw Chain, 16” Suits Ms261.........................................Oregon Chainsaw Chain, 3/8” X 1.6Mm, 66 Links..............................Skate Basket.......................................................................................Split Trolley London Underground.....................................................Split Trolley Network Rail...................................................................STEL New and Improved Rail Drill......................................................STEL Rail Drill Spare Parts...................................................................Stephill Generators 2.7 kVA / 2.2 kW.................................................Stephill Generators 2.7kW / 3.4 kVA.................................................Stihl Chainsaw Chain, 12”, Suits Ht101, Ms150t................................Stihl Chainsaw Chain, 14”, 50 Links, 1.3Mm X 3/8” Pitch...................Stihl Chainsaw Chain, 14”, Suits Ms181.............................................Stihl Chainsaw Chain, 15”, 56 Links, 1.6Mm......................................Stihl Chainsaw Chain, 15”, Suits Ms260, Ms261................................Stihl Chainsaw Chain, 15”, Suits Ms290.............................................Stihl Chainsaw Chain, 15”, Suits Ms361, Ms290, Ms291....................Stihl Chainsaw Chain, 16”, 55 Links, Suits Ms210, Ms230..................Stihl Chainsaw Chain, 16”, Suits Ms260, Ms261................................Stihl Chainsaw Chain, 16”, Suits Ms362c...........................................Stihl Chainsaw Chain, 22”, Suits Hs46................................................Stihl Guide Bar, 13”, Suits Ms261.......................................................Stihl Guide Bar, 14” Rollomatic...........................................................Stihl Guide Bar, 15”, Suits Ms261.......................................................Stihl Guide Bar, 16”, Suits 023............................................................Stihl Guide Bar, 16”, Suits Ms261.......................................................Stihl Guide Bar, 18”, Suits Ms261.......................................................Stihl Guide Bar, 22”, Suits 550Mm.....................................................Stihl MS261CM Chainsaw...................................................................Stihl Tungston Tipped Chainsaw Chain...............................................Stihl Tungston Tipped Chainsaw Chain, 16”, 67 Links.........................Trolley Ramps.....................................................................................Water Bottle Hose Nipple Fitting........................................................
818282828282828282828686838686787979797979808080767475505464677979797979797979715861878884857979797979797979797979808080808080807779797086
Water Bottle Hose Nut Fitting............................................................Water Bottle Pressure Valve (Black)...................................................Water Bottle Pump (Black).................................................................Water Hose 3/8” PVC 4 Metres..........................................................Yale D85 Pull Lift................................................................................William Hackett Lever Hoist.............................................................Bag Lifter - 1 Tonne...........................................................................Camlok Lifting Clamp........................................................................ 150LB Conductor Rail Clamp...........................................................U69 Check Rail Clamp.......................................................................Universal Rail Clamp.............................................................Track Magnets.........................................................................Magic Wand Swarf Collector....................................................
86868686919598989898989089
SOCKETS1/2” Drive Impact Sockets Hexagon 10mm.....................................................1/2” Drive Impact Sockets Hexagon 12mm.....................................................1/2” Drive Impact Sockets Hexagon 13mm.....................................................1/2” Drive Impact Sockets Hexagon 14mm.....................................................1/2” Drive Impact Sockets Hexagon 15mm.....................................................1/2” Drive Impact Sockets Hexagon 16mm.....................................................1/2” Drive Impact Sockets Hexagon 17mm.....................................................1/2” Drive Impact Sockets Hexagon 18mm.....................................................1/2” Drive Impact Sockets Hexagon 19mm.....................................................1/2” Drive Impact Sockets Hexagon 20mm.....................................................1/2” Drive Impact Sockets Hexagon 21mm.....................................................1/2” Drive Impact Sockets Hexagon 22mm.....................................................1/2” Drive Impact Sockets Hexagon 23mm.....................................................1/2” Drive Impact Sockets Hexagon 24mm.....................................................1/2” Drive Impact Sockets Hexagon 25mm.....................................................1/2” Drive Impact Sockets Hexagon 26mm.....................................................1/2” Drive Impact Sockets Hexagon 27mm.....................................................1/2” Drive Impact Sockets Hexagon 28mm.....................................................1/2” Drive Impact Sockets Hexagon 29mm.....................................................1/2” Drive Impact Sockets Hexagon 30mm.....................................................1/2” Drive Impact Sockets Hexagon 32mm....................................................1/2” Drive Impact Sockets Hexagon 33mm.....................................................1/2” Drive Impact Sockets Hexagon 36mm.....................................................1/2” Drive Impact Sockets Hexagon 38mm.....................................................1/2” Drive Impact Sockets Hexagon 39mm.....................................................1/2” Drive Impact Sockets Hexagon 41mm.....................................................1/2” Drive Impact Sockets Hexagon 42mm.....................................................1/2” Drive Impact Sockets Hexagon 46mm.....................................................1/2” Drive Impact Sockets Hexagon 8mm.......................................................1/2” Drive X T50 Torx......................................................................................1” Drive Bi-Square 1-11/16” X 1”.....................................................................1” Drive Bi-Square 1-3/16” X 1”.......................................................................1” Drive Bi-Square 1-3/8” X 1”.........................................................................1” Drive Bi-Square 1-5/16” X 1”.......................................................................1” Drive Impact Sockets Hexagon 16mm........................................................1” Drive Impact Sockets Hexagon 17mm........................................................1” Drive Impact Sockets Hexagon 18mm........................................................1” Drive Impact Sockets Hexagon 19mm........................................................1” Drive Impact Sockets Hexagon 20mm........................................................1” Drive Impact Sockets Hexagon 21mm........................................................1” Drive Impact Sockets Hexagon 22mm........................................................1” Drive Impact Sockets Hexagon 23mm........................................................1” Drive Impact Sockets Hexagon 24mm........................................................1” Drive Impact Sockets Hexagon 25mm........................................................1” Drive Impact Sockets Hexagon 26mm........................................................1” Drive Impact Sockets Hexagon 27mm........................................................1” Drive Impact Sockets Hexagon 28mm........................................................1” Drive Impact Sockets Hexagon 29mm........................................................1” Drive Impact Sockets Hexagon 30mm........................................................1” Drive Impact Sockets Hexagon 31mm........................................................1” Drive Impact Sockets Hexagon 32mm........................................................1” Drive Impact Sockets Hexagon 33mm........................................................1” Drive Impact Sockets Hexagon 34mm........................................................1” Drive Impact Sockets Hexagon 35mm........................................................
181818181818181818181818181818181818181818181818181818181819181818181818181818181818181818181818181818181818
SMALL PLANT
1” Drive Impact Sockets Hexagon 36mm........................................................1” Drive Impact Sockets Hexagon 37mm........................................................1” Drive Impact Sockets Hexagon 38mm........................................................1” Drive Impact Sockets Hexagon 39mm........................................................1” Drive Impact Sockets Hexagon 40mm........................................................1” Drive Impact Sockets Hexagon 41mm........................................................1” Drive Impact Sockets Hexagon 42mm........................................................1” Drive Impact Sockets Hexagon 43mm........................................................1” Drive Impact Sockets Hexagon 44mm........................................................1” Drive Impact Sockets Hexagon 45mm........................................................1” Drive Impact Sockets Hexagon 46mm...........................................1” Drive Impact Sockets Hexagon 50mm...........................................1” Drive Impact Sockets Hexagon 55mm...........................................1” Drive X T70 Torx.............................................................................3/4” Drive X T70 Torx.........................................................................Extension Bar 1” Drive Square X 300MM..........................................Extension Bar 1” Drive X 250MM.......................................................Extension Bar 1” Drive X 300MM.......................................................Retaining Pins 45mm.........................................................................Retaining Pins 50mm.........................................................................Retaining Pins 55mm.........................................................................Retaining Pins 60mm.........................................................................Socket Adaptor - Square 1” Male X 3/4” Male...................................Socket Adaptor 1/2” Female X 1” Male.............................................Socket Adaptor 1/2” Male X 1/2” Male.............................................Socket Adaptor 1” Female X 1/2” Male ............................................Socket Adaptor 1” Female X 3/4” Male.............................................Socket Adaptor 1” Male X 1” Male....................................................Socket Adaptor 3/4” Female X 1/2” Male..........................................Socket Adaptor 3/4” Female X 1” Male.............................................Socket Connector 3/4” Male X 3/4” Male..........................................Socket Vossloh 28MM X 21MM X 1” Drive........................................Socket Vossloh 28MM X 21MM X 1/2” Drive.....................................Socket Vossloh 28MM X 21MM X 3/4” Drive.....................................Socket Vossloh 28MM X 21MM X 1” Drive 120MM..........................Socket Vossloh 28MM X 21MM X 1/2” Drive 90MM.........................Socket Vossloh 28MM X 21MM X 3/4” Drive 90MM.........................Universal Joint 1” Male X 1” Female..................................................
18181818181818181818181819192020201818181819191919191919191918181818181820
SPARESCHAMPION SPARK PLUG RCJ6Y...........................................................CHAMPION SPARK PLUG RCJ7Y...........................................................CHAMPION SPARK PLUG RCJ8............................................................CHAMPION SPARK PLUG RL86C..........................................................Geismar Mp12 Drive Belt [Non Oem] UKG00923..............................Geismar Mp12 Toothed Drive Belt [Non Oem] UKG00923A..............Husqvarna Drive Belt 506 07 05-07...................................................Husqvarna K650 Drive Belt [Non Oem] BELT02.................................Husqvarna K750, K760 Drive Belt [Non Oem] BELT03........................Kubota Rtv900 Wedge Drive Belt 17594-97010.................................NGK SPARK PLUG B2LM.....................................................................NGK SPARK PLUG B6HS......................................................................NGK SPARK PLUG B6S.........................................................................NGK SPARK PLUG BCPR5ES.................................................................NGK SPARK PLUG BCPR6ES.................................................................NGK SPARK PLUG BCPR7ES.................................................................NGK SPARK PLUG BCR8ES...................................................................NGK SPARK PLUG BKR5E.....................................................................NGK SPARK PLUG BKR5EK...................................................................NGK SPARK PLUG BM6A.....................................................................NGK SPARK PLUG BM7A.....................................................................NGK SPARK PLUG BMR4A...................................................................NGK SPARK PLUG BMR6A...................................................................NGK SPARK PLUG BP5ES.....................................................................
343434343535353535353434343434343434343434343434
NGK SPARK PLUG BP6ES....................................................................NGK SPARK PLUG BPM6A...................................................................NGK SPARK PLUG BPM6F....................................................................NGK SPARK PLUG BPMR4A.................................................................NGK SPARK PLUG BPMR6A.................................................................NGK SPARK PLUG BPMR7A.................................................................NGK SPARK PLUG BPMR8Y..................................................................NGK SPARK PLUG BPR4ES...................................................................NGK SPARK PLUG BPR5ES...................................................................NGK SPARK PLUG BPR5HS..................................................................NGK SPARK PLUG BPR6ES...................................................................NGK SPARK PLUG BPR6HS..................................................................NGK SPARK PLUG BR6HS.....................................................................NGK SPARK PLUG CMR4A...................................................................NGK SPARK PLUG CMR5H...................................................................NGK SPARK PLUG CMR6A...................................................................NGK SPARK PLUG CMR6H...................................................................NGK SPARK PLUG CMR7H...................................................................NGK SPARK PLUG CR5HS....................................................................NGK SPARK PLUG CR5HSB..................................................................NGK SPARK PLUG CR9EH9..................................................................Stihl Ts410 Drive Belt [Non Oem] BELT05..........................................Timberwolf Drive Belt [Non Oem] BELT06.........................................Truemeter Rail Measure Drive Belt 102167-01..................................
343434343434343434343434343434343434343434353535
SPILL MANAGEMENTAbsodan Absorbent Granules 20Ltr...................................................Absorbent Pads Heayweight 500MM X 400MM Qty 100..................Absorbent Pads Lightweight 500MM X 400MM Qty 200..................Absorbent Rolls Heavy Weight...........................................................Absorbent Socks Universal 75MM x 1.2M Qty 2...............................Isol8 Organic Absorbent Bag 1.3Kg....................................................Multi-Zorb Absorbent Granules 20Ltr................................................Oil Spill Sheets Qty 200 500MM x 400MM........................................Plant Nappy Large 2000MM X 1370MM............................................Plant Nappy Liner Large.....................................................................Plant Nappy Liner Medium................................................................Plant Nappy Liner Small.....................................................................Plant Nappy Medium 1000MM X 685MM.........................................Plant Nappy Small 685MM X 500MM................................................Spill Control Kit 30 Litre Universal......................................................Spill Kit, Emergency Oil, Vinyl Bag, 50 Ltr...........................................Spill Kit, Emergency, Maintainance, Vinyl Bag, 50 Ltr........................Spill Kit, Mini,Oil Only, 10 Ltr..............................................................
262626262726262727272727272727262626
TRACK MEASURINGAnalogue Rail Thermometer...............................................................Digital Rail Thermometer....................................................................Dual Track Trumeter Rail Measuring Wheel.......................................Single Track Trumeter Rail Measuring Wheel.....................................
47474848
SPARESSOCKETS
Insulated Heel & Point Crowbar.........................................................Insulated Heel End Crowbar...............................................................Insulated Hook Switch Pole................................................................Insulated Hydraclaw Jack Handle.......................................................Insulated Hydramite Jack Handle.......................................................Insulated Keying Hammer - 7LB OR 10LB ..........................................Insulated Pad Scraper.........................................................................Insulated Pan Jack Jack Handle...........................................................Insulated Pandrol E Clip & PR Clip Pan Puller ....................................Insulated Pandrol E Clip Pan Setter.....................................................Insulated Pandrol E Plus Pan Puller....................................................Insulated Pandrol Elastic Spike Extractor............................................Insulated Pandrol Fastclip Extractor...................................................Insulated Pandrol Fastclip Installer ...................................................Insulated Pandrol Fastclip Sleeper Lifter.............................................Insulated Pandrol Pan Lock Pan Puller................................................Insulated Pandrol Rear Arch Extractor................................................Insulated Point End Crowbar..............................................................Insulated Pot Dolly Hexagon 17MM For Concrete.............................Insulated Pot Dolly Square 22MM For Wood.....................................Insulated Rail Turning Bar Bull Head Rail...........................................Insulated Rail Turning Bar Flat Bottom...............................................Insulated SHC De-Clipping Bar............................................................Insulated Simplex 85A & Duff 516T Jack Handle................................Insulated Simplex A17 Jack Handle....................................................Insulated Sledge Hammer - 10LB.......................................................Insulated Sledge Hammer - 14LB.......................................................Insulated Sledge Hammer - 7LB.........................................................Insulated Steel Sleeper Tongs.............................................................Insulated T - Handled Chair Screw 1-1/8”..........................................Insulated Timber Nips........................................................................Insulated Timber Sleeper Tongs.........................................................Jack Handle Pan Jack, Toe Jack, Zwicky / Kenhi Handle......................
1010
666
1387111111111
108855555
131313
49447
Large Pad Scraper................................................................................Newcastle Draining Shovel One Piece Handle....................................Pandrol E Plus Pan Puller....................................................................Pandrol E Plus Pan Puller....................................................................Pandrol Fastclip & Vipa-Sp Installer....................................................Pandrol Fastclip Extractor...................................................................Pandrol Fastclip FE/FC & Vipa-Sp Extractor .......................................Pandrol Fastclip Installer.....................................................................Pandrol Fastclip Sleeper Lifter.............................................................Pandrol FE/FC & Vipa-SP Installer .....................................................Pandrol Pan Lock Puller......................................................................Pandrol Rear Arch Extesnision Tool....................................................Pandrol RT60 Check Rail Installer.......................................................Pandrol Spare Bolt For Pan Puller.......................................................Pandrol Spare Hook For C & D Pan Puller...........................................Pandrol Spare Hook For E Plus Pan Puller..........................................Pandrol Type C For PR & E-Clip Pan Puller..........................................Pandrol Wear Gauge For Pan Puller Hook..........................................Points Machine Winding Handle Cranked Suits Style 63 Points Machine............................................................................................Rabbit Shovel One Piece Handle........................................................Rail Tongs............................................................................................Rail Turning Bar Bull Head Rail...........................................................Rail Turning Bar Flat Bottoom.............................................................Round Mouth Shovel One Piece Handle............................................SCHWIHAG Bar...................................................................................SHC De-Clipping Bar...........................................................................Simplex A17 Jack Handle....................................................................Slewing Jack Handle Only...................................................................Small Pad Scraper................................................................................Square Mouth Shovel One Piece Handle............................................Steel Cable Laying Shovel...................................................................Steel Clay Grafter Shovel....................................................................Steel Newcastle Draining Shovel........................................................Steel Rabbit Shovel.............................................................................Steel Round Mouth Shovel.................................................................Steel Sleeper Tongs.............................................................................Steel Square Mouth Shovel................................................................Steel Taper Mouth Shovel..................................................................Steel Trenching Shovel........................................................................Stel’s Point Machine Pump Handle Straight.......................................T - Handled Chair Screw 1-1/8”..........................................................Taper Mouth Shovel One Piece Handle..............................................Timber Nips........................................................................................Timber Sleeper Tongs.........................................................................Trenching Shovel One Piece Handle...................................................Thin Pad Scraper......................................................................
811
2222222222222222
211
455
1155778
121212121212
4121212
59
1244
128
WHEEL BARROWInuslated Wheel Barrow..................................................................... 49
TRACK TOOLS *TRACK TOOLS *Pandrol PR, E, E-Plus & RE Clips Pan Setter.........................................15” Fishplate Nut Running Spanner ..................................................30” Fishplate Nut Locking Spanner.....................................................All Steel Extractor Ferrule..................................................................All Steel Pot Dolly Hexagon 17MM....................................................All Steel Pot Dolly Hexagon 19MM....................................................All Steel Square Pot Dolly 22MM For Wood......................................Cable Laying Shovel One Piece Handle...............................................Chipping Shovel Insulated..................................................................Chisel & Point Crowbar.......................................................................Clay Grafter Shovel One Piece Handle................................................Concrete Sleeper Tongs......................................................................Heavy Duty 1.7m Digging Bar.............................................................Heel & Point Crowbar.........................................................................Heel & Point Crowbar (Round Shaft)..................................................Hickory Handle Keying Hammer - 10LB.............................................Hickory Handle Keying Hammer - 7LB...............................................Hickory Handle Sledge Hammer - 10LB.............................................Hickory Handle Sledge Hammer - 14LB.............................................Hickory Handle Sledge Hammer - 7LB...............................................Insulated 1” T Drive Bar.....................................................................Insulated 1-1/4”Jack Handle .............................................................Insulated Bi-Square Fishplate Nut Spanner .......................................Insulated Check Rail Spanner - 1-11/16” AF X 30” ............................Insulated Chisel & Point Crowbar.......................................................Insulated Chisel End Crowbar.............................................................Insulated Concrete Sleeper Tongs......................................................Insulated Digging Bar.........................................................................Insulated Extractor Ferrule.................................................................Insulated Fishplate Spanner................................................................
1669885
11111011
49
10101313131313
6766
1010
4996
* TOOLS FOR USE ON PANDROL FASTENING SYSTEMS
TERMS & CONDITIONS1. INTERPRETATION 1.1 In these conditions:BUYER means the person, firm or company entering into the Contract to purchase the Goods from the Seller;CONDITIONS means the standard terms and conditions of sale set out in this document and (unless the context otherwise requires) includes any special terms and conditions agreed in Writing between the Buyer and the Seller;CONTRACT means the contract for the purchase and sale of the Goods;DELIVERY DATE means the date the Goods are to be collected by the Buyer or if they are to be delivered the time of actual delivery and if the Buyer wrongfully fails to take delivery of the Goods, the date that the Seller notifies the Buyer that the Goods are ready for collection or, as the case may be, the Seller tenders delivery of the Goods;GOODS means the goods (including any installment of the Goods or any parts for them) which the Seller is to supply in accordance with these Conditions;SELLER means Specialised Tools And Equipment Ltd - T/A STEL;WRITING includes fax, electronic mail and comparable means of communication.1.2 Any reference in these conditions to any provision of a statute shall be con-strued as a reference to that provi-sion as amended, re-enacted or extended at the relevant time.1.3 The headings in these Conditions are for convenience only and shall not aect their interpretation.
2. BASIS OF THE CONTRACT2.1 Save where the Buyer shall place an order with the Seller verbally (in which case it is the Buyers responsibil-ity to ensure the accuracy of the order), the Seller shall sell and the Buyer shall purchase the Goods in accordance with any written quotation of the Seller which is accepted by the Buyer or any written order of the Buyer and which is accepted by the Seller, subject in either case to these Con-ditions, which shall govern the Contract to the exclusion of any other terms and conditions subject to which any quotation is accepted or purported to be accepted, or any such order is made or purported to be made by the Buyer.2.2 The Seller’s employees or agents are not authorised to make any representa-tions concerning the Goods unless confirmed by the Seller in Writing. In entering into the Contract the Buyer acknowledges that it does not rely on, and waives any claim for breach of any such representations which are not so confirmed.2.3 Any advice or recommendation(s) given by the Seller or its employees or agents to the Buyer or its employ-ees or agents as to the storage installation application or use of the Goods which is not confirmed in Writing by the Seller is followed or acted upon entirely at the Buyer’s own risk, and accordingly the Seller shall not be liable for any such advice or recommendation which is not so confirmed.2.4 Any typographical, clerical or other error or omission in any catalogue or other sales literature, quotation, price list, acceptance of oer, invoice or other document or information issued by the Seller shall be subject to correction without any liabili-ty on the part of the Seller.2.5 Where any manufacturers names or numbers are mentioned they are for refer-ence purposes only and do not necessarily indicate the source of manufacture nor any connection with the manufacturer.
3. ORDERS3.1 No order submitted by the Buyer shall be accepted or deemed to be accepted by the Seller unless and until confirmed in Writing by the Seller’s authorised repre-sentative (and the issuing of an invoice by the Seller to the Buyer shall constitute acceptance in Writing).3.2 The Buyer shall be responsible to the Seller for ensuring the accuracy of the terms of any order and for giv-ing the Seller any necessary information relating to the Contract within a sufficient time to enable the Seller to perform the Contract.3.3 If the Goods are to be manufactured or any process is to be applied to the Goods, the Seller reserves the right to subcontract any of the manufacturing or other processes to a third party and shall not be liable for any increase in the costs of labour materials or other costs of manufacture, any change of delivery dates quantities or specifications caused by such subcontracting.3.4 No Contract may be cancelled by the Buyer except with the agreement in Writing of the Seller and on terms that the Buyer shall indemnify the Seller in full against all loss (including loss of profit), costs, damages, charges and expenses.3.5 The Seller reserves the right to undertake credit references and may suspend performance of the Contract or any other contract with the Buyer if such referenc-es are unsatisfactory.3.6 Each order submitted by the Buyer shall constitute an order capable of acceptance by the Seller. If the Seller agrees that any such order shall constitute an order in circumstances where it is reasonable for the Seller to act in reliance upon such order, such order becomes an order accepted by the Seller and the Buyer shall indemnify and keep the Seller indemnified against all costs, damages, charges and expenses arising from such reliance by the Seller if such order does not become an order capable of acceptance by the Seller.
SPECIALISED TOOLS AND EQUIPMENT LTD - T/A STEL : TERMS AND CONDITIONS FOR SALE OF GOODS4. PRICE4.1 The price shall be the Seller’s quoted price in Writing, or where no price has been quoted or a quoted price is no longer valid, the price set out on the price list of the Seller prevailing at the date on which the Goods are dispatched. All prices quoted are valid for 30 days or until earlier acceptance by the Buyer, after which time they may be altered by the Seller without giving notice.4.2 The Seller reserves the right to increase the price to reflect any increase in the cost to the Seller which is due to any factor beyond the Seller’s control, any change in delivery or performance dates, quantities or specifications which is requested by the Buyer, or any delay caused by any instructions of the Buyer or failure of the Buyer to give the Seller adequate information or instructions.4.3 The Seller reserves the right to impose a handling charge of 15% of the net price of the Goods where the Buyer returns the Goods and such return is not due to any fault on the part of the Seller.4.4 The price is exclusive of any applicable value added tax, which the Buyer shall be additionally liable to pay to the Seller.4.5 Where Goods are to be delivered otherwise than at the Seller’s premises the price is inclusive of all trans-port, packaging and insurance provided that the order has the following net value; UK Mainland £200.00 N. Ireland £300.00 Channel Islands £300.00If the net value of the order is lower than that stated above or the Buyer requires delivery to Southern Ireland or outside of the UK and Channel Islands then the price of the Goods is stated to be exclusive of all transport, packag-ing and insurance costs and the Buyer shall be liable for the costs of the same.
5. TERMS OF PAYMENT5.1 The Seller shall be entitled to invoice the Buyer for the price including without limitation the VAT, transport, packaging and insurance costs referred to in clauses 4.4 and 4.5 on or at any time after the Delivery Date.5.2 The Buyer shall pay the price without any deduction or set-o on or before the last day of the month follow-ing the Delivery Date and the Seller shall be entitled to recover the price notwithstanding that delivery may not have taken place and the property in the Goods has not passed to the Buyer. The time of payment of the price shall be of the essence of the Contract.5.3 If the Buyer fails to make any payment on the due date then, without prejudice to any other right or remedy the Seller shall be entitled to:5.3.1 Suspend all or any further orders to the Buyer made under that or any other contract with the Buyer and in such event the Buyer shall not be released from its obligations to the Seller under that or any other contract or cancel the Contract or any other contract with the Buyer and to claim damages from the Buyer for breach of contract;5.3.2 Appropriate any payment made by the Buyer to such part of the Contract or the Goods (or the goods supplied under any other contract between the Buyer and the Seller) as the Seller may think fit (notwithstanding any purported appropriation by the Buyer); and5.3.3 Charge the Buyer interest (both before and after any judgment) on the amount unpaid, at the rate of 4 per cent per annum above Barclays Bank base rate from time to time accruing daily, until payment in full is made; and5.3.4 Failure to pay on time any part of the debt on or before the due date will render the entire debt as being due immediately from the buyer.5.4 The Seller may without notice set o any sums from time to time owed to the Buyer in or towards the satisfaction of all and any liabilities of the Buyer to the Seller whether or not under this Contract.5.5 The Seller shall have a general lien over all goods and property of the Buyer (whether worked on or not) in the possession of the Seller for all unpaid debts due from the Buyer and the Seller reserves the right upon the expiration of fourteen days written notice to dispose of such goods or property and to apply the proceeds of sale (net of costs of sale) towards the payment of such debts.5.6 Any costs (excluding interest which is covered in section 5.3.3) incurred by the Seller as a result of bounced cheques, or failure to pay on or before the due date will be recoverable from the Buyer.
6. DELIVERY6.1 Unless otherwise agreed in Writing by the Seller, the Goods shall be delivered on the following basis; UK Mainland To the Buyers place of business N. Ireland To the Buyers place of business Channel Islands To the Buyers place of business S. Ireland Ex-works Export Ex-works6.2 Where the Goods are delivered to the Buyer’s premises the Buyer shall be responsible for unloading the Goods and where the Seller or its employees or agents carry out or assist the Buyer, its employees or agents in such unloading the Buyer shall indemnify and keep indemnified the Seller against all liabilities including without limitation all loss, costs, charges and expenses arising from such unloading.6.3 Where the Goods are delivered on an ex-works basis the Buyer will take delivery of the Goods within 4 days of the Seller giving it notice that the Goods are ready for delivery.6.4 Where the Goods are to be delivered to N. Ireland or the Channel Islands, or the Seller has otherwise agreed to deliver the Goods outside the UK Mainland all Goods shall be delivered FOB the air or sea port of ship-ment and the Seller shall be under no obligation to give notice under s32(3) of the Sale of Goods Act 1979. The Buyer shall be responsible for complying with any legislation or regulations governing the importation of the Goods into the country of destination and for the payment of any duties thereon.6.5 Any dates quoted for delivery of the Goods are approximate only and the Sell-er shall not be liable for any delay howsoever caused. Time for delivery shall not be of the essence. If no dates are specified, delivery will be within a reasonable time.6.6 Where the Goods are to be delivered in installments, each delivery or perfor-mance shall constitute a separate contract and failure by the Seller to deliver or perform any one or more of the installments in accordance with these Conditions or any claim by the Buyer in respect of any one or more installments shall not entitle the Buyer to treat the Contract as a whole as repudiated.6.7 Where the Goods are to be delivered on an ex-works basis the Buyer will pro-vide at its own expense adequate and appropriate equipment and manual labour for loading the Goods.6.8 Where the Goods to be supplied are ex-stock, the Seller reserves the right to delay delivery of ex-stock items until supplies of such goods are received by the Seller, whereupon the Seller shall deliver such items.6.9 If the Goods (or any installment are not available on the Delivery Date) for any reason other than any cause beyond the Seller’s reasonable control or the Buyer’s fault, the Seller shall be liable to the Buyer and the Seller’s liability shall be limited to the excess, if any, of the reasonable cost to the Buyer (in the cheapest available market) of similar goods to replace those not delivered over the price of the Goods.6.10 If the Buyer fails to take delivery of the Goods or fails to give the Seller adequate delivery instructions at the time stated for delivery (otherwise than by reason of any cause beyond the Buyer’s reasonable control or by reason of the Seller’s fault) then, without prejudice to any other right or remedy available, the Seller may :-6.10.1 Store the Goods until actual delivery and charge the Buyer for the reasona-ble cost of storage, including insurance;6.10.2 After the expiration of 3 months from the Delivery Date dispose of the Goods in such manner as the Seller may determine; and6.10.3 Suspend any further performance of the services under the Contract or any other contract.6.11 Shall the Buyer require delivery of Goods at the weekend, the Buyer shall be responsible for and agrees to indemnify and keep indemnified the Seller against any additional delivery costs and expenses resulting from the delivery being at the weekend.
7. RISK AND PROPERTY7.1 Save where clause 6.4 applies risk of damage to or loss of the Goods shall pass to the Buyer on the Delivery Date.7.2 Not with standing the passing of the risk in the Goods or any other provision of these Conditions the property in the Goods shall not pass to the Buyer until the Seller has received in cash or cleared funds payment in full of the price of the Goods and all other goods sold or agreed to be sold by the Seller to the Buyer under any other contract.7.3 Until such time as the property in the Goods passes to the Buyer, the Buyer shall hold the Goods as the Seller’s agent or bailee, and shall keep the Goods separate from those of the Buyer and third parties and properly stored, protected and insured and identified as the Seller’s property. Until such time as the property in the Goods passes to the Buyer, the Buyer shall be entitled to resell or use the Goods in the ordinary course of its business, but shall have a fiduciary duty to the Seller to account for the proceeds of sale or otherwise of the Goods.7.4 Until such time as the property in the Goods passes to the Buyer, the Seller shall be entitled at any time to require the Buyer to deliver up the Goods to the Seller and, if the Buyer fails to do so forthwith, to enter upon any premises of the Buyer or any third party where the Goods are stored and repossess the Goods and for that purpose the Buyer hereby authorises and licences the Seller, its officers, employees and agents to enter upon any land or building upon which the Goods are situated to recover those Goods.7.5 The Buyer shall not be entitled to or in any way charge by way of security for any indebtedness, any of the Goods which remain the property of the Seller, but if the Buyer does so all moneys owing by the Buyer to the Seller shall without preju-dice to any other right or remedy of the Seller forthwith become due and payable.
8. WARRANTIES AND LIABILITIESTHE BUYER’S ATTENTION IS IN PARTICULAR DRAWN TO THE PROVISIONS OF THIS CLAUSE.8.1 Subject as expressly provided in these Conditions, all warranties, conditions or other terms implied by statute or common law are excluded to the fullest extent permitted by law.8.2 Any claim by the Buyer which is based on any defect in the quality, condition or under-delivery of the Goods by more than 5%, whether or not delivery is refused by the Buyer shall be notified to the Seller within 3 days from the Delivery Date or, where the defect or failure was not apparent on reasonable inspection, within a reasonable time after discovery of the defect or failure and in any event within 7 days of discovery. If delivery is not refused, and the Buyer does not so notify the Seller, the Seller shall have no liability for such defect or failure, and the Buyer shall be bound to pay the price as if the Contract had been performed in accord-ance with its terms.8.3 Where a valid claim is notified to the Seller in accordance with clause 8.3 and Goods are to be returned to the Seller they must be accompanied by a despatch note quoting the original invoice number within 2 months of the Delivery Date. Goods that are soiled or damaged will not be accepted and acceptance of return by a sales representative does not constitute acceptance by the Seller.8.4 Where any valid claim in respect of any of the Goods, which is based on any defect in the quality or condition is notified to the Seller and Goods are returned in accordance with these Conditions, the Seller shall be entitled to replace the Goods (or the part in question) free of charge or, at the Seller’s sole discretion, refund to the Buyer the price (or a proportionate part of the price) but the Seller shall have no further liability to the Buyer.8.5 The Seller shall not be liable to the Buyer by reason of any representation, or any implied warranty, condition or other term, or any duty at common law, or under the express terms of the Contract, for any consequential loss or damage (whether for loss of profit, product recall or otherwise), costs, expenses or other claims for compensation whatsoever (whether caused by the negligence of the Seller, its employees or agents or oth-erwise) which arise out of or in connection with the supply of the Goods and the entire liability of the Seller under or in connection with the Contract shall not exceed the price under the Contract, except as expressly provided in these Conditions.8.6 The Seller shall not be liable to the Buyer or be deemed to be in breach of the Contract by reason of any delay in performing, any of the Seller’s obligations if the delay or failure was due to any cause beyond the Seller’s reasonable control.8.7 Nothing in these Conditions shall exclude or limit the Seller’s liability for death or personal injury caused by the Seller’s negligence.
9. INSOLVENCY OF BUYER9.1 This clause applies if:9.1.1 The Buyer makes any voluntary arrangement with its creditors or becomes subject to an administration or-der (or being an individual or firm) becomes bank-rupt or (being a company) goes into liquidation, otherwise than for the purpose of amalgamation or reconstruction; or9.1.2 An encumbrancer takes possession, or a receiver is appointed, of the Buy-er’s undertaking or any of its property or assets; or9.1.3 The Buyer ceases, or threatens to cease, to carry on business; or9.1.4 the Seller reasonably apprehends that any of the events mentioned above are about to occur in relation to the Buyer and notifies the Buyer accordingly.9.2 If this clause applies then, without prejudice to any other right or remedy available to the Seller, the Seller shall be entitled to cancel the Contract and/or any further deliveries under the Contract without any liability to the Buyer, and if the Goods have been delivered, but not paid for, the price shall become immediately due and payable.
10. GENERAL10.1 Neither the Buyer nor the Seller shall be entitled to assign the whole or any part of the Contract without the prior written consent of the other provided that the Seller shall be entitled to subcontract the whole or any part of its obligations.10.2 No waiver by the Seller of any breach of the Contract by the Buyer shall be considered as a waiver of any subsequent breach of the same or any other provision.10.3 If any provision of these Conditions is held by any competent authority to be invalid or unenforceable in whole or in part the validity of the other provisions of these Conditions and the remainder of the provision in ques-tion shall not be aected thereby unless such provision goes to the root of the Contract.10.4 The Conditions shall constitute the entire agreement in relation to the subject matter and no modification or waiver thereof shall be valid unless made in Writing expressly for the purpose and signed by an authorised officer of the Seller and of the Buyer provided that nothing in these Conditions shall exclude or limit liability for fraud.10.5 Unless expressly provided in these Conditions, no term of the Contract is enforceable pursuant to the Contracts (Rights of Third Parties) Act 1999 by any person who is not a party to it.10.6 Unless expressly stated in these conditions time shall not be of the essence in this Contract.10.7 The Contract shall be governed by the laws of England and the Buyer agrees to submit to the exclusive jurisdiction of the English Courts.