power tools
-
Upload
khangminh22 -
Category
Documents
-
view
1 -
download
0
Transcript of power tools
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
1
BBalancer
MH = HeavyI = IntermediateL = LightM= MediumS = Super
DDuty
LL = Long cable (8.2' or 9.85')S = Short cable (6.5')
LLocking type
10Upper weight
capacity in kilograms
–
BalancersModel Number Key
Heavy-Duty • Capacity: 22 to 143 Lb. (10 to 65 kg) • Lift: 6.5 Ft. (2000 mm) • Std. Pkg. 1Safety device prevents load dropping due to spring breakage • Upper suspension with rotary safety hook • Precision guided cablewinding prevents jamming • Anti-friction cable guide • Manual locking device for instant clamping or release • Worm screw capacity adjustment • Spring drum assembly • Floor controlled locking device available as an option (BIL-7343).
No.Capacity Lb. (kg)Pkg. Wt. Lb. (kg)
BHD-1522-33 (10-15)
22.7 (10.3)
BHD-2033-44 (15-20)
23.4 (10.6)
BHD-2544-55 (20-25)
24.7 (11.2)
BHD-3055-66 (25-30)
25.4 (11.5)
No.Capacity Lb. (kg)Pkg. Wt. Lb. (kg)
BHD-3566-77 (30-35)
26.0 (11.8)
BHD-4577-99 (35-45)
27.3 (12.4)
BHD-5599-121 (45-55)
27.6 (12.5)
BHD-65121-143 (55-65)
30.0 (13.6)
IR
001
Light-Duty • Capacity: 0.9 to 6.6 Lb. (.4 to 3 kg) Lift: 5.2 Ft. (1600 mm) • Std. Pkg. 1Rotary hook • Self lubricating bushings • Adjustable capacity and stroke limiting device • Auxiliary safety suspension.
No.Capacity Lb. (kg)Pkg. Wt. Lb. (kg)
BLD1.9-2.2 (.4-1)
1.3 (.6)
BLD22.2-4.4 (1-2)
1.3 (.6)
BLD34.4-6.6 (2-3)
1.3 (.7)
IR
002
Locking Type Balancer • Lift: 8.2 Ft. (2500 mm) • Std. Pkg. 1
No.Capacity Lb. (kg)Pkg. Wt. Lb. (kg)
BMDLL-44.4-8.8 (2-4)
6.6 (3.0)
BMDLL-68.8-13.2 (4-6)
7.3 (3.3)
BMDLL-813.2-17.6 (6-8)
7.9 (3.6)
BMDLL-1017.6-22.0 (8-10)
8.4 (3.8)
IR
003
Medium-Duty • Capacity: 2.2 to 26.5 Lb. (1 to 12 kg) • Lift: 6.5 to 8.2 Ft. (2000 to 2500 mm) • Std. Pkg. 1 • Safety device prevents dropping of load due to spring breakage (except BMDS-2) • Anti-friction cable guide • Adjustable stroke limiting device.
BMDS-22.2-5.5 (1-2.5)
4.4 (2.0)
BMDS-44.4-8.8 (2-4)
4.4 (2.0)
BMDS-68.8-13.2 (4-6)
5.1 (2.3)
BMDS-813.2-17.6 (6-8)
5.5 (2.5)
No.Capacity Lb. (kg)Pkg. Wt. Lb. (kg)
BMDL-44.4-8.8 (2-4)
6.4 (2.9)
BMDL-68.8-13.2 (4-6)
7.1 (3.2)
BMDL-813.2-17.6 (6-8)
7.7 (3.5)
BMDL-1017.6-22.0 (8-10)
8.2 (3.7)
BMDL-1222-26.5 (10-12)
8.8 (4.0)
No.Capacity Lb. (kg)Pkg. Wt. Lb. (kg)
IR
004
IR
005
Super-Duty • Capacity: 33 to 363 Lb. (15 to 165 kg) • Std. Pkg. 1 • Safety device prevents load dropping due to spring breakage Manual locking device for instant clamping or release • Anti-friction cable guide • Cable replacement without balancer disassembly Floor controlled locking device available as an option (BIL-7343) • Precision guided cable winding prevents jamming • Alignable rotating upper hook • Worm screw capacity adjustment • Cable visible for inspection • Other sizes available on request.
BSD-2033-44 (15-20)
8.2 (2500)41.9 (19.0)
BSD-3044-66 (20-30)
8.2 (2500)43.7 (19.8)
BSD-4066-88 (30-40)
8.2 (2500)45.9 (20.8)
BSD-5088-110 (40-50)
8.2 (2500)52.7 (23.9)
BSD-60110-132 (50-60)
8.2 (2500)56.0 (25.4)
BSDL-2033-44 (15-20)9.85 (3000)42.1 (19.1)
BSDL-2544-55 (20-25)9.85 (3000)43.9 (19.9)
BSDL-3555-77 (25-35)9.85 (3000)46.1 (20.9)
BSD-70132-154 (60-70)
8.2 (2500)59.1 (26.8)
BSD-80154-176 (70-80)
8.2 (2500)61.3 (27.8)
BSD-90176-198 (80-90)
8.2 (2500)63.5 (28.8)
BSDL-4577-99 (35-45)9.85 (3000)52.5 (23.8)
BSDL-5088-110 (40-50)
9.85 (3000)52.7 (23.9)
No.Capacity Lb. (kg)
Lift Ft. (mm)Pkg. Wt. Lb. (kg)
BSDL-60110-132 (50-60)
9.85 (3000)55.8 (25.3)
BSDL-70132-154 (60-70)
9.85 (3000)58.9 (26.7)
BSDL-80154-176 (70-80)
9.85 (3000)61.7 (28.0)
BSDL-90176-198 (80-90)
9.85 (3000)64.0 (29.0)
No.Capacity Lb. (kg)
Lift Ft. (mm)Pkg. Wt. Lb. (kg)
No.Capacity Lb. (kg)
Lift Ft. (mm)Pkg. Wt. Lb. (kg)
No.Capacity Lb. (kg)
Lift Ft. (mm)Pkg. Wt. Lb. (kg)
IR
006
IR
007
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS2
BSDL-100198-220 (90-100)
9.85 (3000)81.1 (36.8)
BSDL-115220-254 (100-115)
9.85 (3000)85.3 (38.7)
BSDL-130 254-286 (115-130)
9.85 (3000)88.0 (39.9)
BSDL-140286-309 (130-140)
9.85 (3000)94.4 (42.8)
BSDL-150309-330 (140-150)
9.85 (3000)100.6 (45.6)
No.Capacity Lb. (kg.)
Lift Ft. (mm)Pkg. Wt. Lb. (kg)
No.Capacity Lb. (kg.)
Lift Ft. (mm)Pkg. Wt. Lb. (kg)
BSD-100198-220 (90-100)
8.2 (2500)78.5 (35.6)
BSD-120220-265 (100-120)
8.2 (2500)85.3 (38.7)
BSD-140265-309 (120-140)
8.2 (2500)92.2 (41.8)
BSD-150287-330 (130-150)
8.2 (2500)98.1 (44.5)
BSD-165330-363 (150-165)
8.2 (2500)106.3 (48.2)
IR
008
Balancers (continued)
51357176 PB35AS8
12501" x 41/4"
4843 (19.51)
52085586 PB50AS1
115011/8" x 6"
6255 (24.95)
51296358 PB35AS8
12501" x 41/4"
4840 (18.14)
52085560 PB50AL1
115011/8" x 6"
6252 (23.6)
No.Model
BPMChuck Size Hex w/ Collar In.
CFMPkg. Wt. Lb. (kg)
MX60A & B • Std. Pkg. 1 • 60 Lb. Class BreakerFixed Handle • Ideal for medium to heavy asphaltremoval, demolition, utility work, and industrialmaintenance. No costly side rods and springs.Composite valve eliminates rusting • Directionalexhaust eliminates blow back • Built in lubricator• 11/8" x 6" shank = MX60A• 11/4" x 6" shank = MX60B • Muffler sold separately, part no. 51953453.
MX60AF & BF • Std. Pkg. 1 • 60 Lb. Class BreakerFlex Handle™ • All the same features as theMX60A & B with the additional “Flex-Handle™”feature. IR Flex-Handles provide vibration dampening in a full 360 degree range of movement. Competitive mechanical springs onlywork in one direction and springs only work in onedirection and lose their ability to absorb vibrationwhen fully compressed, or when hammering whilepulling the breaker out of the work surface.
MX90A & B • Std. Pkg. 1 • 90 Lb. Class BreakerFixed Handle • The MX90 is the hardest hittingbreaker in its class, and is ideal for performingheavy demolition work on thick concrete, asphaltand rock. • No costly side rods and springs • Thisunit features a power-stroke piston which deliversmore power to the work surface and eliminates acostly wear item, the anvil block • Directionalexhaust eliminates blow back • Built in lubricator• 11/8" x 6" shank = MX90A• 11/4" x 6" shank = MX90B• Muffler sold separately, part no. 51953453.
MX90AF & BF • Std. Pkg. 1 • 90 Lb. Class BreakerFlex Handle™ • All the same features as theMX90A & B with the additional “Flex-Handle™”feature. IR Flex-Handles provide vibration dampening in a full 360 degree range of movement. Competitive mechanical springs onlywork in one direction and springs only work in onedirection and lose their ability to absorb vibrationwhen fully compressed, or when hammering whilepulling the breaker out of the work surface.
PB35AL8 • Std. Pkg. 1 • 35 Lb. Class Breaker Proven reliability and productivity make this unita favorite for bridge deck resurfacing and lightweight demolition of concrete and asphalt One piece housing eliminates costly side rodsand springs. • Power-stroke piston delivers moreenergy to the work surface and eliminates anothercostly wear item, the anvil block • Built in lubricator helps assure adequate lubrication 1" x 41/4" shank.
PB50AL1 • Std. Pkg. 1 • 50 Lb. Class Breaker These powerful units are perfect for general demolition, yet easy to handle. They serve aseconomical alternatives to heavier 60 Lb. and90Lb. breakers • One piece housing eliminatescostly side rods and springs • Power-stroke pistondelivers more energy to the work surface andeliminates another costly wear item, the anvilblock • 11/8" x 6" shank.
PB35AS8 • Std. Pkg. 1 • 35 Lb. Class BreakerAll the same features and specifications as thePB35AL8 with the addition of a muffler.
PB50AS1 • Std. Pkg. 1 • 50 Lb. Class BreakerAll the same features and specifications as thePB50AL1 with the addition of a muffler.
Pavement Breakers
IR
009
IR
010
51957207 MX60A
11/8" x 6"1250
5208029875
69.0 (31.4)
51957181 MX60B
11/4" x 6"1250
5208029875
69.0 (31.4)
51955136 MX90A
11/8" x 6"1250
5195345389
86.0 (39.0)
51955110MX90B
11/4" x 6"1250
51953453 89
86.0 (39.0)
51957215 MX60AF11/8" x 6"
125052080298
7569.0 (31.4)
51957199 MX60BF11/4" x 6"
1250 52080298
7569.0 (31.4)
51955136 MX90AF11/8" x 6"
125051953453
8986.0 (39.0)
51955110MX90BF11/4" x 6"
1250 51953453
89 86.0 (39.0)
No.Model
Chuck Size Hex w/ Collar In.BPM
Muffler Kit Part No.CFM
Pkg. Wt. Lb. (kg)
Standard Vibration Reduced Flex-Handle
Muffled Non-Muffled
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
3
DT9DL1Latch
7/8 x 31/4D GripInside156047
22.0 (10.0)
DT9DS1Screw
7/8 x 31/4D GripInside 1560 47
22.0 (10.0)
DT9DH1Hitch
7/8 x 31/4D GripInside 1560 47
22.0 (10.0)
No.Retainer Type
Shank Size Hex w/ Collar In.Handle TypeTrigger Type
Blows per MinuteCFM
Pkg. Wt. Lb. (kg)
DT9DL1, DS1, and DH1 • Std. Pkg. 16" Stroke Rivet Buster • Provides the hard-hitting performance of a small breaker, without the added weight. Enclosed “D” handle. Inside 3 finger trigger. Latch retainer:DT9TL1. Sleeve retainer: DT9DS1. Hitchretainer: DT9DH1. Takes 7/8" x 31/4" hex steel. Integral muffler. Solid steel cylinder.
IR
012
Demolition Tools
Paving Breaker
IR
01195LA1
DemolitionTools No.
RetainerType
Shank Size with Collar in.
Length withoutAccessoryIn. (mm)
Pkg. Wt. Lb. (kg)
93A193LA195A195LA195LA3
SleeveLatchSleeveLatchLatch
7/8 Hex x 31/47/8 Hex x 31/47/8 Hex x 31/47/8 Hex x 31/41 Hex x 41/4
187/8 (479)187/8 (479)217/8 (556)217/8 (556)217/8 (556)
22 (10.0)23 (10.4)27 (12.3)28 (12.7)30 (13.6)
Weight10 = 23 Lb. (10 kg)13 = 28 Lb. (13 kg)
ConfigurationD = Grip Inside TriggerD2 = Grip Outside TriggerT = "T" Handle Top Level
Retainer TypeS = ScrewH = HitchL = Latch
Chuck Size (Hex)1 = 7/8” x 31/4”2 = 1” x 41/4”
DT=DemolitionTool
DT 10 D2 S 1
No.Shank Size Hex w/ Collar In.
CFMLength w/o Accessory In. (mm)
Pkg. Wt. Lb. (kg)
DT10DS17/8 x 31/4
62263/8 (670)
23 (10)
DT10DH17/8 x 31/4
62263/8 (670)
23 (10)
DT10DL17/8 x 31/4
62263/8 (670)
23 (10)
DT10DL21 x 41/4
62263/8 (670)
23 (10)
DT10D2L17/8 x 31/4
62263/8 (670)
23 (10)No.
Shank Size Hex w/ Collar In.CFM
Length w/o Accessory In. (mm)Pkg. Wt. Lb. (kg)
DT10D2L21 x 41/4
62263/8 (670)
23 (10)
DT10D2S17/8 x 31/4
62263/8 (670)
23 (10)
DT10D2H17/8 x 31/4
62263/8 (670)
23 (10)
DT13TL17/8 x 31/4
62271/8 (690)
28 (13)
DT13TL21 x 41/4
62271/8 (690)
28 (13)
IRGO-PIC Demolition Tools • Std. Pkg. 1 • 3/4" NPT Inlet • Retainers • Screw: Thread-on sleeve (chisels up to 1") Hitch: Thread-on key way (multiple accessory options) • Latch: Traditional latch type (multiple accessory options).
IR
013
IR
014
Model Number Key
8001A • Std. Pkg. 1 • 8" Stroke RivetBuster • General duty eight inch rivetbuster is configured with a “D” grip,inside trigger, and grooved barrel springlock retainer as standard. Piston bridgeprevents accidental discharge forincreased safety. Rugged steel forged “D” handle. Three finger inside trigger.Steel throttle valve. Case hardened alloysteel cylinder. Heavy duty upper andlower sleeves. Takes industry standard jumbo steel.
9001 and 9001A • Std. Pkg. 19" Stroke Rivet Buster • For heavy dutyfoundry application, bridge deck work,rivet removal, tank cutting and ripping, or general brick or concrete demolition.Piston bridge prevents accidental discharge for increased safety. Swan neckhandle. Outside forged steel trigger. Steelthrottle valve. Case hardened alloy steelcylinder. Directional exhaust deflector.Takes industry standard jumbo steel.
11001 and 11001AStd. Pkg. 111" Stroke Rivet BusterFor production rivet removal and heavydemolition. Features all of the same features and benefits of the 9001, including the integral piston bridge foradded safety, a choice of retainers, andthe swan neck handle.
8001A221/2 (577)
8Grooved barrel with lock spring
114044
30.0 (13.61)
9001 221/2 (577)
9Grooved barrel with lock spring
90040
24.75 (11.23)
9001A221/2 (577)
9 Threaded barrel with lock clip
90040
24.75 (11.23)
11001241/2 (628)
11Grooved barrel with lock spring
80045
30.21 (13.71)
11001A241/2 (628)
11Threaded barrel with lock clip
80045
30.21 (13.71)
No.Length In. (mm)
Stroke In.Retainer Type
BPMCFM
Pkg. Wt. Lb. (kg)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS4
60 Lb. Spike Drivers • Std. Pkg. 1 • MX60-SD: Fixed Handle • MX60F-SD: Flex Handle Spike drivers transfer 20 percent more blow energy to the spike than traditional tools by incorporating thesame hard hitting power-stroke piston technology found in our pavement breakers. The units are availablewith optional flex handles for enhanced operator comfort and productivity. • Built in lubricator • No siderods or springs to wear • Composite valve eliminates valve rust • Power-stroke piston • Fronthead guidesand supports spike.
90 Lb. Spike Drivers • Std. Pkg. 1 • MX90-SD: Fixed Handle • MX90F-SD: Flex Handle For those crews requiring maximum production, IR offers the larger 90 Lb. tool with all the same rugged design and performance specifications as the 60 Lb. tool.
Equipment at Extra Price • Std. Pkg. 1 MX60 muffler (52080298) • MX90 muffler (51953453)
IR
015
Spike Drivers
51997922MX60-SD
125075
69.0 (31.4)
51997948 MX90-SD
1250 89
86.0 (39.0)
51997930 MX60F-SD
1250 75
69.0 (31.4)
51997955MX90F-SD
1250 89
86.0 (39.0)
No.Standard Model
Blows per MinuteCFM
Pkg. Wt. Lb. (kg)
Drills
Series 5 Production Drills • Std. Pkg. 1 900-5000 RPM • .40 HP • Chuck capacity: 1/4" to 1/2" • Double row ball bearingsassure maximum TIR (Total Inch Runout) of .005" for precise, concentric holes.Variable speed control allows slow speed starting and high speed for fast drilling.Skinsulate housing for operator comfort and productivity (pistol only). Excellentpower-to-weight ratio gets the job done with less fatigue.
• Standard Equipment: Drill chuck and key, vertical hanger • For No. 5LN3: Dead handle assembly and required adapters. • Skinsulate™ Comfort Coating.
Air Inlet = 1/4" NPT. Recommended hose = 1/4" (6 mm). Performance figures are at90 PSI (620 kPa). Spindle = 3/8" x 24. Sound level = Approx. 75 dBA. To orderwithout chuck delete last digit.
Reversible Pistol Grip
5AJST4
No. Free Speed RPMStall Torque In./Lb.
(Nm)Length w/ Chuck
In. (mm)Chuck Capacity
In. (mm)
Side to CenterDistance In. (mm)
Pkg. Wt.Lb. (kg)
5RANST6
5RANST8
900
900
70 (8.0)
70 (8.0)
8.25 (210)
8.25 (210)
3/8 (10)1/2 (13)
13/16 (21)13/16 (21)
3 (1.36)
3 (1.36)
5AHST4
5AJST4
5AKST4
5ALST4
5ANST6
5000
4500
3000
2200
1000
20 (2.3)
20 (2.3)
30 (3.4)
40 (4.5)
80 (9.0)
6.81 (173)
6.81 (173)
6.81 (173)
6.81 (173)
8.13 (206)
1/4 (6)1/4 (6)1/4 (6)1/4 (6)
3/8 (10)
13/16 (21)13/16 (21)13/16 (21)13/16 (21)13/16 (21)
2 (.91)
2 (.91)
2 (.91)
2 (.91)
2.75 (1.25)
5LJ1
5LK1
5LL1
5LN3
800
3100
2300
1000
20 (2.3)
30 (3.4)
40 (4.5)
80 (9.0)
8.06 (205)
8.06 (205)
8.06 (205)
9.38 (238)
1/4 (6)1/4 (6)1/4 (6)
3/8 (10)
13/16 (21)13/16 (21)13/16 (21)13/16 (21)
2.06 (.93)
2.06 (.93)
2.06 (.93)
3.25 (1.47)
Nonreversible Pistol Grip
Nonreversible Lever Throttle
IR
016
5LK1
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
5
Series 6 Production Drills • Std. Pkg. 1 350-20,000 RPM • .51 HP • Chuck capacity 1/4" to 3/8" • Double rowball bearing construction assures maximum TIR (Total Inch Runout) of.005" for precise, concentric holes. Variable speed control permits slowspeed starting and high speed for fast drilling. Skinsulate housing for operator comfort and productivity. Cantil ever-mounted planet gears areeasily accessible without need to press from gear frame; simplifies maintenance. • Standard Equipment: Drill chuck and Key, dead handleon No. 6LR3 • Skinsulate™ Comfort Coating.
Air Inlet = 1/4" NPT. Recommended hose = 3/8" (10 mm). Performance figures are at 90 PSI (620 kPa).Spindle = 3/8" x 24. Sound level = Approx. 74 dBA. To order without chuck delete last digit.
Pistol Grip
No. Free Speed RPMStall TorqueIn./Lb. (Nm)
Length w/ Chuck In. (mm)
Chuck Capacity In. (mm)
Side to CenterDistanceIn. (mm)
Pkg. Wt. Lb. (kg)
6ADST46AHST46AJST46AJJST46AKST46ALST46AMST66ARST66ASST6
20,000600051003950310021501500500350
7 (.8)23 (2.6)27 (3.1)35 (4.0)45 (5.1)64 (7.3)89 (10.1)220 (25.1)313 (35.7)
7 (178)7 (178)7 (178)7 (178)7 (178)7 (178)8 (203)
8.25 (210)8.25 (210)
1/4 (6)1/4 (6)1/4 (6)1/4 (6)1/4 (6)1/4 (6)
3/8 (10)3/8 (10)3/8 (10)
51/64 (21)51/64 (21)51/64 (21)51/64 (21)51/64 (21)51/64 (21)51/64 (21)51/64 (21)51/64 (21)
2.19 (1.0)2.19 (1.0)2.19 (1.0)2.19 (1.0)2.19 (1.0)2.19 (1.0)2.75 (1.25)
3 (1.36)3 (1.36)
6LH16LJ16LJJ16LK16LL16LR3
60005100395031002150500
23 (2.6)27 (3.1)35 (4.0)45 (5.1)64 (7.3)
220 (25.1)
7.91 (201)7.91 (201)7.91 (201)7.91 (201)7.91 (201)9.19 (233)
1/4 (6)1/4 (6)1/4 (6)1/4 (6)1/4 (6)
3/8 (10)
51/64 (21)51/64 (21)51/64 (21)51/64 (21)51/64 (21)51/64 (21)
2.13 (.95)2.13 (.95)2.13 (.95)2.13 (.95)2.13 (.95)2.94 (1.33)
6ALST4
6LH1
Lever Throttle
IR
017
Drills (continued)
Series 7 Production Drills • Std. Pkg. 1Pistol Grip • 600-20,000 RPM • .75 HP • Chuck capacity 1/4" to 1/2" • Double row ballbearing construction assures maximum TIR (Total Inch Runout) of .005" for precise, concentric holes. Variable speed control permits slow speed starting and high speed for fast drilling. Skinsulate housing for operator comfort and productivity. Cantilever-mounted planet gears are easily accessible without need to press from gear frame; simplifies maintenance • Standard Equipment: Drill chuck and key, vertical hanger, horizontal hanger, dead handle on N and Q ratio models. • Skinsulate™ Comfort Coating.Air Inlet = 1/4" NPT. Recommended hose = 3/8" (10 mm). Performance figures are at 90 PSI (620 kPa). Spindle = 3/8" x 24. Sound level = Approx. 82 dBA.
No.Free Speed
RPMStall Torque In./Lb. (Nm)
Length w/ Chuck In. (mm)
Chuck Capacity In. (mm)
Side to CenterDistance In. (mm)
Pkg. Wt. Lb. (kg)
7ADST47AHST47AJST47AJJST47AKST67ALST67AMST67ANST87AQST8
20,000600048004000320024001400900600
10 (1.13)33 (3.73)40 (4.52)47 (5.53)58 (6.55)78 (8.81)
130 (14.69)185 (20.91)270 (30.51)
7.44 (189)7.44 (189)7.44 (189)7.44 (189)7.63 (194)7.44 (198)8.50 (216)8.75 (222)8.75 (222)
1/4 (6)1/4 (6)1/4 (6)1/4 (6)
3/8 (10)3/8 (10)3/8 (10)1/2 (13)1/2 (13)
7/8 (22)7/8 (22)7/8 (22)7/8 (22)7/8 (22)7/8 (22)7/8 (22)7/8 (22)7/8 (22)
2.25 (1.02)2.31 (1.05)2.31 (1.05)2.31 (1.05)2.38 (1.08)2.69 (1.22)2.94 (1.33)3.19 (1.45)3.25 (1.47)
7AMST6
IR
018
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS6
IR
019
Series 5, 6, and 7 Production Angle Drills • Std. Pkg. 1 • Pistol Grip • 400-3250 RPM. Chuck capacity 1/4"-1/2" • Maximum TIR (Total Inch Runout) runout of .005" insures precisionholes for critical applications. Infinitely variable speed allows slow speed starting and high speeddrilling. Angle head may be rotated 360° to allow ideal orientation with the throttle.Ergonomically designed housing provides a secure surface for operator grip. Modular designallows maximum parts interchangeability and easy, low cost maintenance. Air Inlet = 1/4" NPT.Recommended hose = 1/4" (6 mm). Spindle = 3/8" x 24. Performance figures are at 90 PSI (620 kPa).
No.Free Speed
RPMSmall Torque In./Lb. (Nm)
Length w/Chuck
In. (mm)
Height of Headw/ ChuckIn. (mm)
Chuck CapacityIn. (mm)
Side to CenterDistance ofAngle Head
In. (mm)Pkg. Wt. Lb. (kg)
7LJ2A415LK2A416LK2A417LL3A425LL2A416LL2A427LM3A435LN2A436LP3A437LN3A446LR3A44
325020002000155015001400900700600600400
57 (6.4)45 (5.1)65 (7.3)
112 (12.7)60 (6.8)95 (10.7)192 (21.7)120 (13.6)190 (21.7)275 (31.1)320 (36.2)
10 (254)9.41 (240)9.47 (240)10.38 (263)9.41 (240)9.53 (242)11.06 (281)10.19 (258)10.63 (270)11.06 (281)10.69 (271)
2.97 (75)2.97 (75)2.97 (75)3.66 (93)2.97 (75)3.19 (81)3.91 (99)3.59 (91)3.91 (99)4.13 (105)4.13 (105)
1/4 (6)1/4 (6)1/4 (6)
3/8 (10)1/4 (6)
3/8 (10)3/8 (10)3/8 (10)3/8 (10)1/2 (12)1/2 (13)
17/32 (14)17/32 (14)17/32 (14)11/16 (18)17/32 (14)17/32 (14)11/16 (18)17/32 (14)11/16 (18)11/16 (18)11/16 (18)
3 (1.36)2.63 (1.20)2.75 (1.25)3.44 (1.56)2.63 (1.20)2.81 (1.27)
4 (1.79)3.44 (1.60)3.75 (1.70)4.19 (1.90)
4 (1.81)
Lever Throttle
6LL2A42
7LM3A43
Series 3, 5, 6, and 7 Production Angle Drills • Std. Pkg. 1 • 2150-6000 RPM • 1/4" x 28 Female threaded spindle • Maximum TIR (Total Inch Runout) runout of .005" insures precision holes for critical applications. Infinitely variable speed allows slow speedstarting and high speed drilling. Angle head may be rotated 360° to allow ideal orientation with the throttle. Ergonomically designedhousing provides a secure surface for operator grip. Modular design allows maximum parts interchangeability and easy, low costmaintenance. Repeated stalling of these Nos. is not recommended. Performance figures are at 90° PSI (620 kPa) air pressure.
6LH1A17LH1A16LJ1A15LH1A17LJ1A16LJJ1A17LK1A16LK1A15LK1A15LL1A16LL1A1
5LH1B15LK1B1
60006000510048004800395032003100300022002150
48003000
23 (2.6)31 (3.5)27 (3.1)20 (2.3)40 (4.5)35 (4.0)57 (6.4)45 (5.1)31 (3.5)40 (4.5)64 (7.3)
20 (2.2)31 (3.5)
9.69 (246)10.38 (263)9.69 (246)9.81 (249)10.38 (263)9.69 (246)10.38 (263)9.69 (246)9.81 (249)9.81 (249)9.69 (246)
9.75 (248)9.75 (248)
1.13 (28)1.13 (28)1.13 (28)1.13 (28)1.13 (28)1.13 (28)1.13 (28)1.13 (28)1.13 (28)1.13 (28)1.13 (28)
1.27 (32)1.27 (32)
21/64 (8)21/64 (8)21/64 (8)21/64 (8)21/64 (8)21/64 (8)21/64 (8)21/64 (8)21/64 (8)21/64 (8)21/64 (8)
21/64 (9)21/64 (9)
2.13 (.95)2.25 (1.02)2.13 (.95)2.19 (1.00)2.25 (1.02)2.13 (.95)2.25 (1.02)2.13 (.95)2.19 (1.00)2.19 (1.00)2.13 (.95)
2.13 (1.00)2.13 (1.00)
Lever Throttle Angle Drills (90° Angle Head)
5LH1B1
SeriesAir Inlet
NPT Hose Rec.Sound
Approx. dBA
3 5, 6, 7
1/8"1/4"
1/4"1/4" (6 mm)
695 = 756 = 747 = 81
Lever Throttle Angle Drills (45° Angle Head)
IR
020
No. Free Speed RPMStall Torque In./Lb. (Nm)
Length In. (mm)
Height of HeadIn. (mm)
Side to CenterDistance In. (mm)
Pkg. Wt. Lb. (kg)
6LL1A1
Drills (continued)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
7
IR
021No.
Chuck Size In. (mm)
Chuck Style
Free SpeedRPM
Stall Torque In./Lb. (Nm)
Length In. (mm)
Side to CenterDistanceIn. (mm)
Pkg. Wt. Lb. (kg)
728JA1728LA2728NA3728J6K728L6K728N8K
5/16 (8)3/8 (10)1/2 (13)3/8 (10)3/8 (10)1/2 (13)
KeyedKeyedKeyedKeylessKeylessKeyless
3800210095038002100950
30 (3.4)54 (6.1)
120 (14.0)30 (3.4)54 (6.1)
120 (14.0)
7.0 (177)7.3 (184)8.4 (212)7.0 (177)7.3 (184)8.4 (212)
29/32 (23)29/32 (23)29/32 (23)29/32 (23)29/32 (23)29/32 (23)
2.4 (1.1)2.5 (1.2)3.1 (1.4)2.4 (1.1)2.5 (1.2)3.1 (1.4)
Drills with Keyless Chucks • Std. Pkg. 1 • Maintenance Drills
Excellent for general purpose applications. 950-3800 RPM, 5 HP. Powerful and economical. Standard Equipment: Dead handle assembly on No. 728NA3.
Air Inlet = 1/4" NPT. Recommended hose = 1/4" (6 mm). Spindle = 3/8" x 24. Performance figures are at 90 PSI (620 kPa) air pressure.
IR
022
Air DrillsStd. Pkg. 1 1/2" Heavy-Duty Reversible 1/2" Heavy-Duty
No.Chuck Size In.Free Speed In.
CFMAir Inlet In.
Pkg. Wt. Lb. (kg)
7803R1/24004
1/44 (1.81)
78031/25004
1/43.75 (1.70)
Std. Pkg. 1 3/8" Heavy-Duty Reversible 3/8" Heavy-Duty 3/8" Super-Duty Reversible
No.Chuck Size In.Free Speed In.
CFMAir Inlet In.
Pkg. Wt. Lb. (kg)
IR
023
Maintenance Drills • Std. Pkg. 1 • Standard Equipment: Dead handle assembly on No. 728NA3. (No.728N-A48 dead handle) • Series 728 drills have 1/4" air inlet.
728JA13800
5/16 (8)19
2.43 (1.1)
728LA22100
3/8 (10)19
2.5 (1.1)
728NA3950
1/2 (13)19
3.06 (1.39)
No.Free Speed RPM
Chuck Capacity In. (mm)CFM
Pkg. Wt. Lb. (kg)
IR
024
3/8" x 243/8" x 243/8" x 243/8" x 243/8" x 243/8" x 24
R0H-99R00A-996A-997801-99-67806-99-8R0K-99
0-1/4 (6) / Medium 0-1/4 (6) / Heavy0-3/8 (10) / Heavy
0-3/8 (10) / Standard0-1/2 (13) / Standard5/64-1/2 (2-13) Heavy
Chuck Size In. (mm) / DutyNo. Thread Standard Equipment on Air Drills
Pkg. Wt.Lb. (kg.)
3A (J, L, M, N, Q), 3L (H, J, L), 5A, 5L (D, H, J, K, K2, L, L2), 7L (J2)6A (D, H, J, JJ, K, L), 6L (H, J, JJ, K, K2, L), 7A (D, H, J, JJ)
6A (M, P), 6L (L2, M, M2, P), 7A (K), 7L (L3)728LA2728NA3
7A (N, Q), 7L (N3)
.6 (.27)
.6 (.27)
.8 (.36)
.8 (.36).95 (.43).95 (.43)
Drill Accessories
IR
025
Drill Chucks • Std. Pkg. 1
ROH-P212-3/83/8
3/8"-24.35 (.16)
IR
026
No.Drive Size In.
Thread SizePkg. Wt. Lb. (kg)
Square Drive Adapter • Std. Pkg. 1No.
Hexagon Drive Size In.Thread Size
Pkg. Wt. Lb. (kg)
R0H-A925-41/4
3/8"-24.23 (.10)
Quick Change Screwdriver Bit Adapter • Std. Pkg. 1
Drills (continued)
7802R3/8
20004
1/43 (1.36)
78023/8
21004
1/43 (1.36)
7804R3/8
12004
1/42.6 (1.18)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS8
22JA110250-1/2" Chuck
5515 (6.8)
22KA1725
0-1/2" Chuck
5515.25 (6.92)
22MA2350
#2 Morse tapersocket
5514.25 (6.46)
22NA1280
5/8" Square drive55
16.5 (7.48)
22KWA1725
1/2" Shank woodbit chuck
5514.25 (6.46)
33SJA450
No. 385
25.75 (11.7)
33SKA300
No. 385
25.75 (11.7)
33SMA185
No. 385
31 (14.1)
44SMA155
No. 4102
43.75 (19.8)
551SMA120
No. 5160
69 (31.3)
No.Free Speed RPM
Morse Taper SocketCFM
Pkg. Wt. Lb. (kg)
Reversible Roll Throttle
Reversible Roll ThrottleNo.
Free Speed RPMSpindle Attachment
CFMPkg. Wt. Lb. (kg)
IR
028
IR
027
IR
029
IR
030
Large Drill AccessoriesSuspension
ringT05-365T05-365
Feed screw
T04-A3T04-A3
No.1 Morsetaper socketT05-323-1DE-323A-2
No. 2 Morsetaper socketT05-323-2DE-323A-2
3-Jaw key chuckT05-99A
DE-99C 5/64-1/2
Description
Series 2X No.Series 22 No.
1/2" SquareDr. Socket adapter
R2J-212BDE-215A
5/8" SquareDr. Socket adapter
–DE-215B
Chuck nut
–DE-347A
Wood bit chuck
–R22W-151
Wood bit chuck wrench
K-27K-27
Description
Series 2X No.Series 22 No.
Grip handleTC-A41
R33H-A41TA-A41
Suspension ringTC-365TC-365TC-365
Breast plateTC-A79TC-A79
–
Feed screw coverTC-461TC-461TA-461
DescriptionSeries 3S No.
Series 33S No.Series 551S No.
Feed screw
R3H-A291R3H-A291
–TA-A291
Wood bit chuck for 1/2"(13 mm) Dia. shank bits
R33SW-151-1/2
R33SW-151-1/2
––
Wood bit chuck for 5/8"(16 mm) Dia. shank bits
R33SW-151-5/8
R33SW-151-5/8
––
Chuck nut
T12-347T12-347T01-347
–
Description
Series 3S No.Series 33S No.
Model 44SMA No.Series 551S No.
Large Drills
Large Angle DrillsStd. Pkg. 1 • Standard Equipment: Self-closing throttle, feed screw and ratchet handle (No. R30-48)and built-in lubricator.
Series 20 drills have 3/8" NPT air inlet, Series 30A and Series R44 drills have 1/2" NPT air inlet.
20LB310
No. 2 Morse taper46
14.75 (6.69)
20SLB310
No. 3 Morse taper46
17.75 (8.05)
R44A165
No. 4 Morse taper102
48 (21.8)
R44SEB95
No. 5 Morse taper102
58.5 (26.5)
No.Free Speed RPM
Morse Taper SocketCFM
Pkg. Wt. Lb. (kg)
Nonreversible Lever Throttle
Reversible Roll Throttle
Reversible Lever Throttle
20S L B
Motor Size Gear Ratio(for 20 and 20S only)
ThrottleA = Self-closing rollB = Lever
20 20S 30
R44 R44SE
IR
031
IR
033
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
9
IR
032
Air ScrewdriversAdjustable Precision Shut-Off Clutch • Std. Pkg. 1Reversible Pistol Handle • Trigger Permit Torque Range (soft draw) 1.5 to 100 In./Lb. Recommended for assembling where precise torquecontrol is required. Standard Equipment: Clutch spring(s). Skinsulate™ Comfort Coating.Q4, S1 = 1/4" Quick Change chuck; S3 = Requires bit guide or finder.
No.
Torque Range(Soft Draw)In./Lb. (Nm)
Clutch Spring*
Free Speed RPM
Side to CenterDistance In. Length In.
Pkg. Wt.Lb. (kg)
41PA24TSQ441PA16TSQ441PA10TSQ4
41PA8TSQ4
15-40 (1.7-4.5)15-60 (1.7-6.8)15-80 (1.7-9.0)
15-100 (1.7-11.3)
LL, M
L, M, HL, M, H
240016001000800
.86
.86
.86
.86
9.49.89.89.8
2.8 (1.27)3 (1.36)3 (1.36)3 (1.36)
41PA24PSQ441PA16PSQ441PA10PSQ441PA8PSQ4
15-40 (1.7-4.5)15-60 (1.7-6.8)15-80 (1.7-9.0)
15-100 (1.7-11.3)
LL, M
L, M, HL, M, H
240016001000800
.86
.86
.86
.86
9.49.89.89.8
2.8 (1.27)3 (1.36)3 (1.36)3 (1.36)
41PA24TPQ441PA16TPQ441PA10TPQ4
15-40 (1.7-4.5)15-60 (1.7-6.8)15-80 (1.7-9.0)
LL, M
L, M, H
240016001000
.86
.86
.86
9.409.80 9.80
2.8 (1.27)3 (1.36)3 (1.36)
41PA8TPQ4
* Clutch Spring: L = Light, M = Medium, H = Heavy. Performance figures are at 90 PSI (620 kPa).
Reversible Pistol Handle (Trigger Permit)
Reversible Pistol Handle • Push to Start
Reversible Pistol Handle • Trigger Start
Tool Series Sound Approx. dBA Air Inlet NPT Hose Size In. Installed Spring
341
6978
1/81/4
1/45/16
L, H (Q Ratio)Heaviest
No.
Torque Range(Soft Draw)In./Lb. (Nm) Clutch Spring*
Free Speed RPM
Side to CenterDistance In. Length In.
Pkg. Wt. Lb. (kg)
41SA25PSQ441SA17PSQ441SA10PSQ441SA8PSQ4
15-40 (1.7-4.5)15-60 (1.7-6.8)15-80 (1.7-9.0)
15-100 (1.7-11.3)
LL, M
L, M, HL, M, H
250017001000800
.80
.80
.80
.80
10.4010.9010.9010.90
2.5 (1.13)2.7 (1.22)2.7 (1.22)2.7 (1.22)
41SA25LPQ441SA17LPQ441SA10LPQ441SA8LPQ4
15-40 (1.7-4.5)15-60 (1.7-6.8)15-80 (1.7-9.0)
15-100 (1.7-11.3)
LL, M
L, M, HL, M, H
250017001000800
.80
.80
.80
.80
10.4010.9010.9010.90
2.5 (1.13)2.7 (1.22)2.7 (1.22)2.7 (1.22)
Reversible Straight Handle • Push to Start
Reversible Straight Handle • Lever Permit
* Clutch spring: L = Light, M = Medium, H = Heavy. Performance figures are at 90 PSI (620 kPa).
Tool Series Sound Approx. dBA Air Inlet NPT Hose Size In. Installed Spring
341
6978
1/81/4
1/45/16
L, H (Q Ratio)Heaviest
Adjustable Precision Shut-Off Clutch • Std. Pkg. 1 Torque range (Soft Draw) 1.5 to 100 In./Lb. Recommended for assembling where precisetorque control is required. Standard Equipment: Suspension bail, clutch spring(s).Skinsulate™ Comfort Coating. Q4, S1 = 1/4" Quick Change chuck; S3 = Requires bit guide or finder.
41SA10PSQ4
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS10
No.
Torque Range(Soft Draw)In./Lb. (Nm) Clutch Spring*
Free Speed RPM
Side to CenterDistance In. Length In.
Pkg. Wt. Lb. (kg)
5RAKC15RALC15RALC3
41PC25TSQ441PC17TSQ4
5RANC15RANC37RALC1
41PC10TSQ441PC8TSQ4
7RAMC1
14-25 (1.6-2.8)13-35 (1.5-4.0)13-35 (1.5-4.0)10-40 (1.1-4.5)10-60 (1.1-6.0)13-70 (1.5-8.0)13-70 (1.5-8.0)15-75 (1.7-8.5)10-80 (1.1-9.0)
10-100 (1.1-11.3)20-110 (2.3-12.5)
L, HL, HL, H
LL, ML, HL, HL, M L, M
L, M, HM, H
26002000200025001700900900180010008001000
.81
.81
.81
.80
.80
.81
.81
.88
.80
.80
.88
8.758.759.008.909.409.509.7510.009.409.4010.56
2.56 (1.16)2.56 (1.16)2.56 (1.16)2.80 (1.27)
3 (1.36)2.81 (1.27)2.81 (1.27)3.13 (1.42)
3 (1.36)3 (1.36)
3.38 (1.53)
5RALC1 41PC8TSQ4
Adjustable Cushion Clutch • Std. Pkg. 1 • Reversible Pistol Handle (Trigger Start)Torque range (soft draw) 1.5 to 110 In./Lb. Recommended forassembling that requires a torque limiting clutch. StandardEquipment: Clutch spring(s). Skinsulate™ Comfort Coating. Q4, C1 = Quick Change chuck; C3 = Requires bit guide or finder.
* Clutch spring: L = Light, M = Medium, H = Heavy. Performance figures are at 90 PSI (620 kPa).
Tool Series Sound Approx. dBA Air Inlet NPT Hose Size In Installed Spring
5417
757879
1/41/41/4
1/45/165/16
LHeaviestLightest
41SC25PSQ441SC17PSQ441SC10PSQ441SC8PSQ4
5RLLC15RLLC3
41SC25LTQ441SC17LTQ4
5RLNC15RLNC37RLLC1
41SC10LTQ441SC8LTQ4
7RLMC1
10-40 (1.1-4.5)10-60 (1.1-6.8)10-80 (1.1-9.0)
10-100 (1.1-11.3)13-40 (1.5-4.6)13-40 (1.5-4.6)10-40 (1.1-4.5)10-60 (1.1-6.8)13-75 (1.5-8.5)13-75 (1.5-8.5)15-75 (1.7-8.5)10-80 (1.1-9.0)
10-100 (1.1-11.3)20-110 (2.3-12.5)
LL, ML, M
L, M, HL, HL, H
LL, ML, HL, HL, ML, M
L, M, HM, H
250017001000800210021002500170010001000210010008001200
.80
.80
.80
.80
.81
.81
.80
.80
.81
.81
.88
.80
.80
.88
10.4010.9010.9010.9010.0010.2510.4010.9010.7511.0011.3110.9010.9011.88
2.8 (1.27)3 (1.36)3 (1.36)3 (1.36)
2.56 (1.16)2.56 (1.16)2.8 (1.27)3 (1.36)
2.81 (1.27)2.81 (1.27)2.88 (1.31)
3 (1.36)3 (1.36)
3.06 (1.39)
Air Screwdrivers (continued)
* Clutch spring: L = Light, M = Medium, H = Heavy. Performance figures are at 90 PSI (620 kPa).
Tool Series Sound Approx. dBA Air Inlet NPT Hose Size In Installed Spring
5417
757879
1/41/41/4
1/45/165/16
LHeaviestLightest
IR
034
IR
035
Adjustable Cushion Clutch • Std. Pkg. 1Reversible Straight Handle (Push to Start)Torque range (soft draw) 1.5 to 110 In./Lb. Recommended for assembling that requires a torque limiting clutch. StandardEquipment: Suspension bail, clutch spring(s), dead handle (No. 7RLMC1 only). Skinsulate™ Comfort Coating.
7RLMC341SC10LTQ4
No.
Torque Range(Soft Draw)In./Lb. (Nm) Clutch Spring*
Free Speed RPM
Side to CenterDistance In. Length In.
Pkg. Wt. Lb. (kg)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
11Air Screwdrivers (continued)
Clutch Spring *Free Speed
RPM
Angle HeadSide to
Center In.Side to CenterDistance In. Length In.
Pkg. Wt. Lb. (kg)
Torque Range(Soft Draw)In./Lb. (Nm)No.
5RLK2C35RLL2C35RLN2C3
10-40 (1.1-4.5)15-55 (1.7-6.2)
15-110 (1.7-12.4)
L, HL, HL, H
18001300600
17/32
17/32
17/32
17/32
17/32
17/32
123/8123/8131/8
3.13 (1.42)3.13 (1.42)3.38 (1.53)
* Clutch spring: L = Light, M = Medium, H = Heavy. Performance figures are at 90 PSI (620 kPa).
Tool Series Sound Approx. dBA Air Inlet NPT Hose Size In. Installed Spring
3541
697578
1/81/41/4
1/41/45/16
LL
Heaviest
5RLK2C3
Adjustable Cushion Clutch • Std. Pkg. 1 • Reversible Angle • Lever Throttle • Torque range (softdraw) 2 to 110 In./Lb. Recommended for assembling that requires a torque limiting clutch.Standard Equipment: Suspension bail, clutch spring(s) • C3 = Requires standard 1/4" hex detentedshank bit.
IR
036
No.50 PSI
In./Lb. (Nm)90 PSI
In./Lb. (Nm)Free Speed
RPMSide to CenterDistance In. Length In.
Pkg. Wt. Lb. (kg)
5RAKP15RALP1
41PP25TSQ441PP17TSQ4
5RANP141PP10TSQ4
7RAMP141PP8TSQ4
7RANP1
14 (1.6)19 (2.2)25 (2.8)37 (4.1)39 (4.4)50 (5.7)63 (7.2)67 (7.6)91 (10.3)
25 (2.8)35 (4.0)45 (5.1)65 (7.3)70 (8.0)90 (10.2)115 (13.1)120 (13.6)165 (18.8)
260020002500170090010001000800700
.81
.81
.80
.80
.81
.80
.88
.80
.88
7.257.257.207.608.007.609.347.609.34
1.88 (.85)1.88 (.85)2.3 (1.04)2.5 (1.13)2.13 (.97)2.5 (1.13)3.13 (1.42)2.5 (1.13)3.13 (1.42)
41SP25LTQ441SP17LTQ441SP10LTQ441SP8LTQ4
25 (2.8)37 (4.1)50 (5.7)67 (7.6)
45 (5.1)65 (7.3)90 (10.2)120 (13.6)
250017001000800
.80
.80
.80
.80
8.609.109.109.10
2.3 (1.04)2.5 (1.13)2.5 (1.13)2.5 (1.13)
Reversible Pistol Handle (Trigger Start)
41SP10LTQ45RALP1
Reversible Straight Handle (Lever Throttle)
Torque range (soft draw) 14 to 165 In./Lb. Recommendedfor assembling that requires more driving torque thanfinal seating torque. Standard Equipment: Dead Handle(No. 7RANP1 only). Skinsulate™ Comfort Coating. Q4, P1 = 1/4" Quick Change chuck.
Positive Jaw Clutch • Std. Pkg. 1 • Reversible Pistol Handle
* Torque may be adjusted by varying the air pressure. Air Inlet: All models 1/4" NPT. • Size hose recommended: Series 41, 7, 5/16". All others 1/4".
IR
037
Torque Range (Soft Draw)
Industrial Air Tool is an authorized
Ingersoll Rand service and repair
center. We stock thousands of parts
to keep your tools in top condition.
IR
038
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS12
No.50 PSI
In./Lb. (Nm)90 PSI
In./Lb. (Nm)Free Speed
RPMSide to CenterDistance In. Length In.
Pkg. Wt. Lb. (kg)
5RAKD15RALD1
41PD25TSQ441PD17TSQ4
5RAND17RALD1
41PD10TSQ441PD8TSQ4
14 (1.6)19 (2.1)25 (2.8)37 (4.1)39 (4.4)39 (4.4)50 (5.7)67 (7.6)
25 (2.8)35 (4.0)45 (5.1)65 (7.3)70 (8.0)70 (8.0)90 (10.2)120 (13.6)
260020002500170090018001000800
.81
.81
.80
.80
.81
.88
.80
.80
7.257.256.907.408.008.637.407.40
1.88 (.85)1.88 (.85)2.1 (.95)2.3 (1.04)2.13 (.97)2.75 (1.25)2.3 (1.04)2.3 (1.04)
41SD25LTQ441SD17LTQ441SD10LTQ441SD8LTQ4
25 (2.8)37 (4.1)50 (5.7)67 (7.6)
45 (5.1)65 (7.3)90 (10.2)120 (13.6)
250017001000800
.80
.80
.80
.80
8.108.908.908.90
2.1 (.95)2.3 (1.04)2.3 (1.04)2.3 (1.04)
No.
Torque Range (Soft Draw)In./Lb. (Nm)
Clutch Spring *
Free SpeedRPM
Angle HeadSide to
Center In.Height to Base
of Bit In. Length In.Pkg. Wt. Lb. (kg)
41AA24LTH441AA16LTH441AA9LTH441AA6LTH4
20-40 (2.2-4.5)25-58 (2.8-6.5)25-90 (2.8-10.2)23-130 (2.6-14.7)
41PD10TSQ4 41SD10LTQ4
Reversible Straight Handle • Lever Throttle
Reversible Pistol Handle • Trigger Start
Torque Range (Soft Draw)
Torque may be adjusted by varying the air pressure. Air Inlet: Series 3: 1/8" NPT. All others 1/4" NPT. Size hose recommended: Series 41, 7, 5/16". All others 1/4".
Direct Drive • Std. Pkg. 1 • Torque range (soft draw) 8 to 120In./Lb. Recommended for soft pull applications not requiringcritical torque control. Standard Equipment: Suspension bail(for lever throttle models only). Skinsulate™ Comfort Coating.Q4, D1 = 1/4" Quick Change chuck.
Adjustable Precision Shut-Off Clutch • Std. Pkg. 1 Reversible Angle • Lever Throttle Torque range (soft draw) 2.0 to 130 In./Lb. Recommended for assembling where precisetorque control is required. Standard Equipment: Suspension bail, clutch spring(s).H4 = Requires standard 1/4" hex detented shank bit.
LL
L, ML, M, H
24001650950600
.58
.58
.58
.65
1.501.501.501.90
13.5013.5014.2014.20
3.6 (1.63)3.8 (1.72)3.9 (1.77)4 (1.81)
* Clutch spring: L = Light, M = Medium, H = Heavy. Performance figures are at 90 PSI (620 kPa).
IR
039
41AA9LTH4
No.Description
SEG3A-IRSeries 3
(1650 RPM or less)
SEG4-ARSeries 41
(1700 RPM or less)
SEG4H-ARSeries 41
(Over 1700 RPM)
Ergo Grip™ and Bio Brace ™ • Std. Pkg. 1Both of these accessories enhance operator comfort by allowing the operator to reduce grip pressure. Soft, resilient foam coating.More consistent torque output is achieved by encouraging completion of the tool shut-off cycle.
Ergo Grip™ • Rotating against a spring mechanism, the Ergo-Grip modifies start-up and shut-off reaction experiencedby the operator. Provides a flange which enables the operator to apply axial pressure through the heel of the hand.Easy to install – unscrew the clutch housing, slip on the Ergo-Grip, and reattach the clutch housing.
Bio Brace™ • The Bio Brace modifies start-up and shut-off reaction force experienced by the operator. Rotating against apadded lever, torque reaction is referred to the operator's arm.Eliminates need for a dead handle, freeing the operator's otherhand. Provides a flange which enables the operator to applyaxial pressure through the heel of the hand.
No.Description
Pkg. Wt. Lb. (kg)
SBB4-ARSeries 41
4 (1.8)
IR
040
Air Screwdrivers (continued)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
13
IR
043
Air & Electric Screwdriver AccessoriesShank Bits and Non-Rotating Finders for Air and Electric Screwdrivers • Std. Pkg. 1 • Standard 1/4"hex detented shank bits and non-rotating finders. For use with all screwdriver models ending with a "3".
For Slotted Head Screws
Bit and FinderLength Flat or Oval Round Fillister Pan Binding TrussScrew Size
2
3
4
5
6
115/16" BitFinder3" Bit Finder
115/16" BitFinder3" Bit Finder
115/16" BitFinder3" Bit Finder
115/16" BitFinder3" Bit Finder
115/16" BitFinder3" Bit Finder
XF164F164F1XF244F244FXF165F165F1XF245
–XF166F166F1XF246F246FXF167F167F1XF247F247FXF168F168F1XF248F248F
XF164F164F1XF244F244FXF165F165F1XF245
–XF165F165F1XF245
–XF166F166F1XF246F246FXF167F167F1XF247F247F
––––
XF164F164F1XF244F244FXF165F165F1XF245
–XF165F165F1XF245
–XF166F166F1XF246F246F
XF164F164F1XF244F244FXF165F165F1XF245
–XF166F166F1XF246F246FXF167F167F1XF247F247FXF168F168F1XF248F248F
XF164F164F1XF244F244FXF165F165F1XF245
–XF166F166F1XF246F246FXF166F166F1XF246F246FXF167F167F1XF247F247F
XF164F164F1XF244F244FXF165F165F1XF245
–XF166F166F1XF246F246FXF167F167F1XF247F247FXF168F168F1XF248F248F
Accessories continued on next page.
* Two Clutch Springs are furnished to cover torque range. Tool is shipped with heavier clutch spring installed. ** Control module ordered separately. Approx. sound level 65 dBA.
IR
041
Precision Shut-Off • Std. Pkg. 1 • Torque range (soft draw) 1.6 In./Oz. to 40 In./Lb. Recommended for assembling where precisetorque control is required. Delvo Features: Precise torque control for more efficient and accurate production. Ergonomic housing provides maximum operator comfort. Dynamic motor brake reduces torque reaction. Operates on standard 115 Volt AC current, nospecial power sources required. Soft starting for accurate positioning of fasteners (ES45T, ES50T, ES50TC). No. ES50TC meets Class
100 clean room specifications. UL listed – Nos. ES45T, ES50T,ES60P, ES60T, ES70P, ES70T, ES80P, ES90P, ES90T, ES100P, and
ES100T. Built-in vacuum pickup on ES50TC. (Purchase ofvacuum pump required). Standard Equipment:
Two bits, two brushes, suspension bail.
Electric Screwdrivers
IR
042
ES45T ES100TES70T
ControlModule
Required**Operation
Torque Range(Soft Draw)
In./Lb. Bit Size In.Free Speed
RPM
Side toCenter
Distance In. Length In.Pkg. Wt. Lb. (kg)No.
ESCB50ESCB50ESCB50NoneNoneNoneNoneNoneNoneNoneNoneNone
Trigger startTrigger startTrigger startTrigger startPush to startPush to startTrigger startPush to startTrigger startPush to startPush to startTrigger start
0.3-6.50.5-9.00.5-9.04.0-16.04.0-16.04.0-174.0-17
12.0-24.010-2610-26
10.0-40.010.0-40.0
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
600-900500-650500-650
20002000100010001200700700400400
.34
.50
.50
.81
.81
.81
.81
.81
.81
.81
.81
.81
8.888.8810.5010.0010.0010.0010.0010.0010.0010.0010.0010.00
.75 (.34)
.75 (.34)
.88 (.40)1.53 (.69)1.5 (.68)1.5 (.68)1.53 (.69)1.5 (.68)1.53 (.69)1.5 (.68)1.65 (.75)1.68 (.76)
ES45T*ES50T*
ES50TC*ES90TES90PES60PES60TES80PES70TES70P
ES100P (Pistol)ES100T (Pistol)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS14
For Slotted Head Screws
Bit and FinderLength Flat or Oval Round Fillister Pan Binding TrussScrew Size
115/16" BitFinder3" Bit Finder
115/16" BitFinder3" Bit Finder
115/16" BitFinder3" Bit Finder
115/16" BitFinder3" Bit Finder
XF168F168F1XF248F248F
XF1610F1610F1XF250F250F
XF1612F1612F1XF2512F2512F
––––
XF168F168F1XF248F248FXF169F169F1XF249
–XF1612F1612F1XF2512F2512FXF1612F1612F1XF2512F2512F
XF168F168F1XF248F248FXF169F169F1XF249
–XF1610F1610F1XF250F250F
XF1610F1610F1XF250F250F
XF168F168F1XF248F248F
XF1610F1610F1XF250F250F
XF1612F1612F1XF2512F2512F
––––
XF169F169F1XF249
–XF1610F1610F1XF250F250F
XF1612F1612F1XF2512F2512FXF2445
–XF1645F1645F1
XF1610F1610F1XF250F250F
XF1612F1612F1
––––––––––
8
10
12
1/4
Shank Bits and Non-Rotating Finders for Air and Electric Screwdrivers (continued) • Std. Pkg. 1 Standard 1/4" hex detented shank bits and non-rotating finders. For use with all screwdriver models ending with a "3".
IR
044
Air & Electric Screwdriver Accessories (continued)
IR
045
IR
046
Bits with Rotating Finders • Std. Pkg. 1 • For use with all screwdrivers • 1/4" hex shank bits.
Shank Bits and Non-Rotating Finders Std. Pkg. 1 Standard 1/4" hex detented shank bits and non-rotating finders. For use with all screwdriver modelsending with a "3".
No.Bit
Dia. In.Blade
Thickness In.Finder
Part No.Screw Head
Opening Pkg. Wt. Lb. (kg)
XF164XF165XF167XF1610XF1612XF249XF250
.122
.154
.215
.312
.360
.275
.312
.026
.032
.036
.046
.050
.042
.046
F164F1F165F1F167F1F1610F1F1612F1
–F250F
.22
.25
.31
.41
.47–
.41
.105 (.048)
.105 (.048).11 (.05).11 (.05).11 (.05).11 (.05).12 (.05)
XR306No. 6
.12 (.05)
XR308No. 8
.12 (.05)
XR3010No. 10
.12 (.05)
XR3012No. 12
.12 (.05)
M631-4Magnetic.12 (.05)
RX2-631-4Non-magnetic
.12 (.05)
No.Type of Bit Holder
Pkg. Wt. Lb. (kg)
No.Round Head Machine Screw Size
Pkg. Wt. Lb. (kg)
No. Length In. Point Size Round HeadFlat or
Oval Head
BindingMachine Head
& Pan HeadFillister
Machine Head Truss Head
1/4" Hex Shank Insert Bits Std. Pkg. 1Pkg. Wt. .11 Lb. (.05 kg)
For Phillips HeadXPB073
XPZB071XPZB073
1
11
No. 3
No. 1No. 3
12 to 1/4"
2,3,412 to 1/4"
12 to 1/4"
2, 3, 412 to 1/4"
12 to 1/4"
2,3,4,512 to 1/4"
12 to 1/4"
2, 3, 4,12 to 1/4"
12 to 1/4"
2,3,4,512 to 1/4"
For Pozidriv Head
IR
047
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
15Air & Electric Screwdriver Accessories (continued)
Hex SocketNo.
Magnetic Socket for
Self TappingScrew No.
Hex SocketNo.
Hex & SquareMachine
Screw Nuts
Hex HeadMachine & Cap Screws
DistanceAcrossFlats In.
6906H6908H6910H6911H6912H*6914H6916H
––
6906PKM6908PKM6910PKM6911PKM6912PKM6914PKM6916PKM
––
––
7210H7211H7212H7214H7216H7218H7220H
2, 34
5, 6810
12,1/4"–
5/16"3/8"
3, 4, 56, 8
10, 12–
1/4"–
5/16"3/8"7/16"
3/161/45/1611/323/87/161/29/165/8
Socket Drivers and Sockets1/4" hex detented shank socket drivers and sockets. For use with all screwdriver models.
1/4" Square Drive
Sockets • * Availability subject to prior sale.3/8" Square
DriveScrew and Nut Size Chart
Power Hex to Square Adapters Std. Pkg. 1 Used to furnish a square drive wheninserted into a hex quick change chuck.They are furnished to fill applicationswhere a driver extension is needed.
Socket Driver No.and Length
2" 4" 6"
1/43/8
7102–
–7106
–7107*
Size ofSquareDrive
In.Pkg. Wt. Lb. (kg)
.65 (.29)
.75 (.34)
IR
048
Square Drive to Hex Adapters • Sockets and Socket Drivers for Hex Head Self-Tapping Screws • Std Pkg. 1For driving hex head, self-tapping screws. The driver takes a long bearing in the socket, leaving only enoughdepth of opening on the opposite end to engage the full thickness of the screw head. The socket is pinned to thedriver and when worn, may be removed and turned end for end on the driver, thus doubling the normal life of the socket.
IR
049
1/4" Hex Shank Socket Driver Socket No. Hex Drive Size In. No. Hex Drive Size In. Socket Size In. (mm) Pkg. Wt. Lb. (kg)
HD168 1/4 HS8 1/4 7/16 (11.1) .01 (.005)
No. Cap ScrewsSafety Set ScrewsHex Across Flats (AF) In.
Pkg. Wt. Lb. (kg)
For Hex Socket Head
IR
050
HX1325HX134HX135HX138
2, 3–
105/16"
81/4"5/16"
–
5/641/85/321/4
.10 (.05)
.10 (.05)
.10 (.05)
.10 (.05)
1/4" Hex Shank Insert Bits • Std. Pkg. 1 • Pkg. Wt. .11 Lb. (.05 kg)
A. For Phillips Head
B. For Pozidriv Head
Round Head
Flat or Oval Head
BindingMachineHead &
Pan Head
FillisterMachine
HeadTruss Head
Point Size 115/16" 23/4" 31/2" 6"
Bit No. and Length
2, 3, 4
5, 6, 7, 8, 9, 10
12 to 5/16"
12 to 5/16"
2, 3, 4
2, 3, 4
5, 6, 7, 8, 9, 10
12 to 1/4"
12 to 1/4"
2, 3, 4
2, 3, 4
5, 6, 7, 8, 10
12 to 1/4"
12 to 1/4"
2, 3, 4
2, 3, 4
5, 6, 8, 10
12 to 5/16"
12 to 5/16"
2, 3, 4
2, 3, 4, 5
6, 8, 10
12 to 1/4"
12 to 1/4"
2, 3, 4, 5
No. 1
No. 2
No. 3
No. 3
No. 1
XP161
XP162
–
XPZ163
XRP161
–
–
–
–
–
XP281
XP282
XP283
–
–
XP481
–
XP483
–
–
A B C
C. For Reed & Prince Head
IR
051
Bit Guides • Std Pkg. 1 • For use with all pistol and lever screwdriver models ending with a "3". Advantages:Increased torque accuracy, decreased bit run out, decreased work piece damage, and decreased bit wobble.* Availability subject to prior sale.
No.Point Size
Pkg. Wt. Lb. (kg)
5RA-P730-1No. 1
.14 (.06)
5RA-P730-2No. 2
.14 (.06)
5RA-P730-3No. 3
.14 (.06)
IR
052
For Use with Bit Lengths 15/16" and 23/4"
Shank Dia. In. (mm)
Screw SizeRange
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS16
For Models ES10C • Std. Pkg. 1
Phillips Head
* Only Phillips bits are meant to be used with vacuum pickup systems. Slotted bits may sometimes be used by undersizing the bits for the vacuum sleeves.
Adapter must be used with slotted screwbits shown above. No. DLW4200.
Slotted Head
No.Point Size
Shank Dia. In. (mm)
Screw Size Range
Pkg. Wt. Lb. (kg)
DLB1220-10*
DLB1224-10*
DLB1227-10*
.005
.006
.007
.015 (.381)
.047 (1.193)
.059 (1.499)
00 to 0
00 to 0
0 to 1
.01 (.005)
.01 (.005)
.01 (.005)
Screwdriver Bits For Model ES40T • Std. Pkg. 10 • Pkg. Wt. .02 Lb. (.009 kg)Phillips Head
DLB2127-10
DLB2128-10
DLB2129-10
DLB2130-10
DLB2131-10
DLB2132-10
2.5
1.7
2.5
1.7
2.5
1.7
2 to 4
2 to 4
2 to 4
5 to 10
5 to 10
10 to 1/4
1
1
1
2
2
3
.118 (2.997)
.156 (3.962)
.157 (3.988)
.156 (3.962)
.157 (3.988)
.235 (5.969)
DLB2120-10
DLB2121-10
DLB2122-10
DLB2123-10
DLB2124-10
DLB2125-10
DLB2126-10
1.7
2.5
1.7
2.5
1.7
2.5
1.7
0 to 1
0 to 1
00 to 0
00 to 0
0 to 1
0 to 1
2 to 4
0
0
00
00
0
0
1
.069 (1.753)
.069 (1.753)
.074 (1.880)
.077 (1.956)
.096 (2.438)
.096 (2.438)
.117 (2.972)
No.Length
In.Screw Size Range In.
PointSize
Shank Dia. In. (mm) No.
LengthIn.
ScrewSize
Range In.PointSize
Shank Dia. In. (mm)
Slotted Head
* Only Phillips bits are meant to be used with vacuum pickup systems. Slotted bits may sometimes be used by undersizing the bits for the vacuum sleeves.
DLB2220-10*
DLB2221-10*
DLB2222-10*
.012
.012
.016
.078 (1.981)
.097 (2.464)
.116 (2.946)
00 to 0
00 to 0
0 to 2
DLB2223-10*
DLB2224-10*
.020
.026
.157 (3.988)
.196 (4.978)
2 to 4
3 to 5
No.PointSize No.
PointSize
Shank Dia. In. (mm)
Screw SizeRange
IR
053
IR
054
IR
055
IR
056
No.Dimension In. (mm)
Overall LengthIn. (mm)
Screw Size In. (mm)
Pkg. Wt. Lb. (kg) External View
DLB2321-10
DLB2322-10
DLB2323-10
DLB2324-10
DLB2420-10
DLB2421-10
DLB2422-10
DLB2423-10
DLB2424-10
DLB2425-10
DLB2426-10
0.06 (1.5)
0.08 (2)
0.12 (3)
0.16 (4)
0.09 (2.3)
0.10 (2.5)
0.12 (3)
0.16 (6)
0.18 (4.5)
0.20 (5)
0.22 (5.5)
1.7 (44)
1.7 (44)
1.7 (44)
1.7 (44)
1.7 (44)
1.7 (44)
1.7 (44)
1.7 (44)
1.7 (44)
1.7 (44)
1.7 (44)
0.12 (3)
0.16 (4)
0.24 (6)
0.31 (8)
–
–
–
0.08 (2)
0.09 (2.3)
0.01 (2.6)
0.12 (3)
.02 (.009)
.02 (.009)
.02 (.009)
.02 (.009)
.02 (.009)
.02 (.009)
.02 (.009)
.02 (.009)
.02 (.009)
.02 (.009)
.02 (.009)
Hexagon • Male & Female
Screwdriver Bits
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
17Workstations
IRBS3-N30 (Hose, FRL, & balancer not included) IRBS3-E0
Parallel Torque Arm Workstations • Std. Pkg. 1 Air Bias Support System: Air adjustment by mini-regulator with air cylinder,for proper positioning of different size tools. Eliminates the clumsy springadjustment of competitive models. Tool positioning is effortless.Parallel Arm Torque Absorber: Absorbs torque reaction. Increases torquerepeatability through shift changes by reducing operator influence on fastener. Keeps tools off the floor. Steel & Aluminum Construction: Anodized finish, lightweight, heavy-duty for high volume production, corrosion resistant.Auto Orientation System: Tool fixture is designedto allow constant perpendicular orientation of thetool, which ensures proper fastener alignment.
IRBP3-E3030
ElectricYes
18 (8.16)
IRBP3-N3030AirYes
18 (8.16)
IRBS2-N024AirNo
11 (4.99)
IRBS2-N2424AirYes
11 (4.99)
IRBS2-E024
ElectricNo
11 (4.99)
IRBS2-E2424
ElectricYes
11 (4.99)
IRBS3-N030AirNo
12 (5.44)
IRBS3-N3030AirYes
12 (5.44)
IRBS3-E030
ElectricNo
12 (5.44)
IRBS3-E3030
ElectricYes
12 (5.44)
No. Length In.Tool Use
Torque AbsorberPkg. Wt. Lb. (kg)
No.Length In.Tool Use
Torque AbsorberPkg. Wt. Lb. (kg)
IR
058
IR
057
Single Arm Workstations • Std. Pkg. 1 Steel Construction with E-Coat: Lightweight but durable for continuous-duty. Corrosion resistant. Flexible: Your choice of 30"or 24" lengths for electric or air tools.
Balancer Hanger: All arms are equipped with a roller mounted balancer hanger for smooth motion of the tool.Electric Cord Clamp Kit: Standard with appropriate models.Accessories: Balancers-choice of balancers7/8 to 21/4 Lb. = Bld 1; 2 to 4 Lb. = Bld 2; 4 to 6 Lb. = Bld 3.48732-1 Bench clamp for mounting arm in place.
Bench Clamp
Assembly Tool Accessories
Swivel Inlets • Std. Pkg. 1 • The Swivel-It™ is a bi-directional 360° air line universal. The Swivel-It™ relieves operatorfatigue by allowing the air hose to hang straight down to thefloor regardless of tool position. For use on drills, screwdrivers,impactools, angle wrenches, grinders, polishers, sanders, etc.Not recommended for use with percussive tools.
IR
059
No.Thread Size In.
Air Flow Range CFM
AS-3/83/8
0-45
AS-1/21/2
0-65
Check out the MRO & Contactor Suppliessection of this catalog to find a complete
selection of Knaack and Weather Guardjob site storage and truck boxes.
Also see the Material Handling section of
this catalog for an overview of the Equiptoline of multi-drawer storage and custom
modular cabinets.
Free SpeedRPM
Length In. (mm)
Side to CenterIn. (mm)
Angle HeadHeight
In. (mm)Spindle
In.Pkg. Wt. Lb. (kg)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS18
IR Precision Fastening Systems • New production processes.Tighter tolerances. Heightened demands for accuracy and efficiency in assembly and fastening operations. Ergonomics andthe human factors. With this dynamic environment in mind,Ingersoll-Rand has created Precision Fastening Systems backed
by torque management components that tailor operating characteristics to specific process requirements. IR TorqueManagement Systems provide a complete selection of electronicmonitoring and control packages for pinpoint accuracy in conjunction with air or DC electric tools.
IR Precision Fastening Systems
3.7-6.6 (5-9)
3.7-6.6 (5-9)
3.7-6.6 (5-9)
3.7-6.6 (5-9)
5.8-11.1 (8-15)
5.8-11.1 (8-15)
5.8-11.1 (8-15)
5.8-11.1 (8-15)
11-18.3 (15-25)
11-18.3 (15-25)
14.7-25.8 (20-35)
14.7-25.8 (20-35)
18.3-29.4 (25-40)
18.3-29.4 (25-40)
DAA9N2S6
DAA9N2Q4
DAA9N2H4
DAA9N2S4
DAA15N2S6
DAA15N2Q4
DAA15N2H4
DAA15N2S4
DAA25N3S8
DAA25N3S6
DAA35N3S8
DAA35N3S6
DAA40N3S8
DAA40N3S6
1275
1275
1275
1275
825
825
825
825
465
465
350
350
300
300
19 (482)
19 (482)
19 (482)
19 (482)
19 (482)
19 (482)
19 (482)
19 (482)
19.4 (493)
19.4 (493)
19.4 (493)
19.4 (493)
19.4 (493)
19.4 (493)
17/32 (13)17/32 (13)17/32 (13)17/32 (13)17/32 (13)17/32 (13)17/32 (13)17/32 (13)11/16 (17)11/16 (17)11/16 (17)11/16 (17)11/16 (17)11/16 (17)
15/16 (34)
15/16 (34)
15/16 (34)
15/16 (34)
15/16 (34)
15/16 (34)
15/16 (34)
15/16 (34)
11/2 (38)
11/2 (38)
11/2 (38)
11/2 (38)
11/2 (38)
11/2 (38)
3/8 Sq.1/4 QC
1/4 Hex insert1/4 Sq.3/8 Sq.1/4 QC
1/4 Hex insert1/4 Sq.1/2 Sq.3/8 Sq.3/8 Sq.3/8 Sq.1/2 Sq.3/8 Sq.
3.7 (1.6)
3.7 (1.6)
3.7 (1.6)
3.7 (1.6)
3.7 (1.6)
3.7 (1.6)
3.7 (1.6)
3.7 (1.6)
3.8 (1.7)
3.8 (1.7)
3.8 (1.7)
3.8 (1.7)
3.8 (1.7)
3.8 (1.7)
Torque Range (Soft Draw) Ft./Lb. (Nm)No.
Air Inlet: 1/4" NPT. Size hose recommended: 1/4" ID. Performance figures are at 90 PSI (620 kPa). Soft draw specifications per ISO 5393.
D Series / Air • Std. Pkg. 1 • Angle Wrenches • Lever Throttle Torque range (soft draw) 4 to 30 Ft./Lb. (5 to 40 Nm).
IR
060
IR
061
Torque Range(Soft Draw) Ft./Lb. (Nm)No.
Free SpeedRPM
Length In. (mm)
Side to CenterIn. (mm)
Angle Head Ht. In. (mm) Spindle In.
Pkg. Wt. Lb. (kg)
700250
19 (482)19.4 (492)
17/32 (13)11/16 (17)
15/16 (34)11/2 (38)
3/8 Sq.3/8 Sq.
4.23 (1.92)4.33 (1.96)
4.3-11 (6-15)12.5-29.4 (17-40)
DEA15N2S6DEA40N3S6
D Series / DC Series • Std. Pkg. 1 • Angle Wrenches • Lever Throttle • Torque range (soft draw) 3 to 30 Ft./Lb. (4 to 40 Nm). Soft draw specifications per ISO 5393.
TMAC / TMAD Measurement Accuracy: ±0.2% of monitor torque full scale. ±1 count of angle (both directions).Measurement Resolution: 0.05% of monitor torque full scale.Torque Transducer Bridge Excitation: 10 VDC standard (can beswitched to 5 V or 20 V).Torque Transducer Zero Offset / Drift Compensation: ±10%(Automatic alert for exceeding offset).Calibration: Values entered through front panel or remote
keyboard. Automatic digital correction.Frequency Response: 0-500 Hz.Analog Torque Output: 4 VDC fullscale.Angle Monitor Output: Two-phase atquadrature 5 V CMOS, and TTL com-patible. Selectable direction, singlephase, and selectable opto isolation.Keypad: User friendly menu-driveninterface for all readings and commands.
Display: LCD supertwist -0.5 Inch character height. 15 Feet visibility. Horizontal (floor) viewing angle >200°. Vertical viewing angle +25° to -50°. 4 lines of 40 characters each, splitinto menu window and parameter / variable display window.Parameter Sets: 8 for one spindle; 4 for two spindle; selectable.Statistics Data Memory: 10,000 parts of total population ondemand. 5000 parts for torque, angle, and 4 extra variables.Printer Output Port: Serial, RS-232-CB – bit word, 1-stop bit, noparity, programmable baud rates of 300 to 9600 baud.Indicators: 5 high-intensity LED indicators.Control Inputs: Run, stop, program select (dependent on user-programmable constants).Control Outputs: Five 24 V outputs for accept / reject, plus shutdown signals.Input Power / Consumption: 115 VAC, 50/60 Hz; 15A peak.Input Signal: .5-2.5 MV/V.Ambient Operating Conditions: 0-50°C temperature, 20-90% non-condensing humidity.Enclosure: NEMA – 12 type.
IR
062
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
19
Power Pulse SeriesThe Power-Pulse Series of pulse nutrunners and screwdrivers offers the best power-to-weight ratio of any pulse tool on the market,and further expands the Ingersoll-Rand line for assembly applications. In many cases, their smaller overall size and lower weight cancontribute to reduced user fatigue, while excellent balance and quiet operation further improve the workplace environment. AllPower-Pulse tools feature a two-speed trigger for precision starts and fast rundown. They also have their own unique cooling systemthat enhances mechanism life and the option of a protective boot for both tool and workpiece protection.
Note: All models beginning with A number designatesPower-Pulse Series.
IR
063
No.
FreeSpeed RPM
3-6
10-16
12-18
15-23
18-25
18-27
20-30
24-43
30-50
35-60
40-70
50-85
60-110
4-8
14-22
16-24
20-31
24-34
24-37
27-41
33-58
41-68
48-82
54-95
68-116
82-150
41-83
138-221
166-249
207-318
249-346
249-373
277-415
332-595
415-692
484-830
553-968
692-1176
830-1521
3-8
16-26
18-28
22-32
25-36
22-38
25-43
34-58
55-80
60-90
71-120
86-146
124-210
4-11
22-35
24-38
30-44
34-49
30-52
34-58
46-79
75-109
82-122
97-163
117-199
169-286
41-111
221-360
249-387
304-443
346-498
304-526
346-595
470-802
761-1106
830-1245
982-1660
1189-2019
1715-2904
5.6
7
7
7
7
6.5
6.5
6.5
7.9
8.2
8.5
8.9
9.7
0.7
0.9
0.9
1
1
1.2
1.2
1.2
1.3
1.4
1.4
1.5
1.7
1/4 Q.C.1/4 Q.C.3/8 SQ.
1/4 Q.C.3/8 SQ.
1/4 Q.C.3/8 SQ.3/8 SQ.1/2 SQ.1/2 SQ.1/2 SQ.1/2 SQ.3/4 SQ.
1.6 (.82)
2.5 (1.13)
2.5 (1.13)
2.9 (1.32)
2.9 (1.32)
3.2 (1.45)
3.2 (1.45)
3.6 (1.63)
4.6 (2.09)
4.9 (2.22)
6.2 (2.81)
7.9 (3.58)
10.8 (4.90)
LengthIn.
Side toCenter
In.Drive
In.Pkg. Wt. Lb. (kg)
100PQ1
280PQ1
280P
380PQ1
380P
500PQ1
500P
700P
900P
1100P
1410P
1900P
3000P
9300
9500
9500
8500
8500
8500
8500
8500
7500
5000
6000
5000
4500
Ft./Lb. Nm kgf/cm Ft./Lb. Nm kgf/cmSoft Draw Torque Range Guide Hard Slam Torque Range Guide
Pulse NutrunnersStd. Pkg. 1 Reversible Pistol HandleTrigger Start Torque range (pistol grip models) 3 to 210 Ft./Lb.Accessories: EQ106P-365 Suspension bail.
Performance figures are at 90 PSI (620 kPa) • All tools have 1/4" NPT and should use 3/8" hose. 3000P has 3/8" NPT and should use 1/2"hose • Torque ranges should be used as a guide only. For best performance, use tools at mid-torque range. Final torque can vary depending on air pressure and type of joint.Soft Draw is based on fastener being hand tight and then tightened with no less than 720° rotation of the fastener. Hard Slam is based on fastener being hand tight and then tightened to full torque with no more than 30° rotation of the fastener.
Equi-Pulse Series The Equi-Pulse Series of pulse nutrunners and screwdrivers is available in single-blade mechanism or twin-blade mechanism versions. The patented twin-blade mechanism delivers two instantaneous, balanced pulses, resulting in higher output torque andfaster rundown speed. An exclusive friction-reduction thrust bearing design dramatically reduces rotational friction, improving torquerepeatability and component durability. The two-speed trigger provides slow speed for gradual starting, as well as high speed for fastrundown. This feature reduces potential workpiece damage resulting form cross-threading. All Equi-Pulse tools incorporate Ingersoll-Rand's unique Channel- Flow™ cooling system, which directs air circulation to the mechanism, keeping the fluid cooler,and preventing the viscosity breakdown that can cause premature failure in competitive tools.
Note: All models beginning with the letter E designates Equi-Pulse Series.
Pulse Nutrunners / Screwdrivers
This section of the catalog also
contains a huge selection of
screwdriver bits and accessories.
100PQ1 280PQ1
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS20Pulse Nutrunners / Screwdrivers (continued)
No.Free Speed
RPM
3-66-117-1415-32
12-2419-30
(4-8)(8-15)(10-19)(20-44)
(16-33)(26-41)
(45-83)(83-152)(97-194)(207-443)
(166-332)(263-415)
4-912-2213-2622-32
22-3026-36
(5-12)(16-30)(18-35)(30-44)
(30-41)(35-49)
(60-120)(166-304)(180-360)(304-443)
(304-415)(360-498)
8.98.79
9.1
10.511.2
0.80.90.91
1.11.1
1/4 Q.C.1/4 Q.C.1/4 Q.C.1/4 Q.C.
3/8 SQ.3/8 SQ.
1.8 (.82)2 (.91)
2.1 (.95)2.6 (1.18)
3.3 (1.5)4.4 (2)
Length In.
Side toCenter In.
DriveIn.
Pkg. Wt. Lb. (kg)
100SQ1180SQ1280SQ1380SQ1
500A700A
10,000900080008500
70005500
Straight
Angle
Ft./Lb. (Nm) (kgf/cm) Ft./Lb. (Nm) (kgf/cm)Soft Draw Torque Range Guide Hard Slam Torque Range Guide
Performance figures are at 90 PSI (620 kPa) air pressure. Torque can be regulated by air pressure • All tools have 1/4" NPT andshould use 3/8" hose • Torque ranges should be used as a guide only. For best performance, use tools at mid-torque range. Finaltorque can vary depending on air pressure and type of joint.Soft Draw is based on fastener being hand tight and then tightened with no less than 720° rotation of the fastener. Hard Slam is based on fastener being hand tight and then tightened to full torque with no more than 30° rotation of the fastener.
100SQ1 380SQ1500A
Pulse NutrunnersStd. Pkg. 1 • Lever StartTorque range (straight models) 3 to 52 Ft./Lb. Torque range (angle models) 12 to 36 Ft./Lb.Accessories: EQ106S-365 Suspension bail.
IR
064
Tapper
IR
065
Tapper • Std. Pkg. 1 • 1/4" and 1/2" Capacity • Air-thrown reverse valve for instant reversal. Ergonomically designed for operatorcomfort and high production. Variable throttle for maximum control and minimum tap breakage. Modular design makes servicingeasy and economical. Standard Equipment: Dead-handle assembly for No. 7RAQT4.
7RAQT4
SeriesAir InletNPT In.
Size HoseIn.
Sound Approx. dBA
Horse Power
37
1/81/4
1/45/16
6979
.16
.50
IR
066
Angle Wrenches
SeriesAir Inlet
NPTHose Size
SoundApprox.
dBAInstalledSpring
341
1/8"1/4"
1/4"5/16"
6979
LHeaviest
In./Lb. NmFree Speed
RPM Length In. In. In.Square
Drive In.ClutchSpring**
Pkg. Wt.Lb. (kg)
(20-40)(25-58)(25-90)(23-130)
2.2-4.52.8-6.52.8-10.22.6-14.7
24001650950600
13.513.514.214.2
.58
.58
.58
.65
1.51.51.51.9
1/41/43/83/8
LL
L, ML, M, H
3.6 (1.63)3.8 (1.72)3.9 (1.77)4 (1.81)
Adjustable Precision Shut-Off Clutch • Std. Pkg. 1 • Reversible • Lever Throttle Torque range (soft draw) 2 to 130 In./Lb. (.2 to 14.7 Nm). Standard Equipment: Vertical hanger.Tool shuts off when preset torque is achieved, providing excellent repeatability with minimaltorque reaction. Automatic shut-off reduces air consumption. Recommended for assemblieswhere precise torque control is required. 41AA9LTS6
* Designed for use on close quarter applications. Not intended for continuous disassembly.
** Clutch spring: L = Light, M = Medium, H = Heavy. Performance figures are at 90 PSI (620 kPa).
41AA24LTS441AA16LTS441AA9LTS641AA6LTS6
No.
Torque Range (Soft Draw)
Performance figures are at 90 PSI (6.2 Bar) air pressure.
No.Free Speed
RPM
Tap ChuckCapacityIn. (mm)
Tapping CapacityIn. (mm)
Length In. (mm)
Side to CenterDistance In. (mm)
Pkg. Wt. Lb. (kg)
7RAQT4 475 1/2 (13) 1/2 (3) 11.81 (300) 7/8 (22) 3.38 (1.50)
IR
068
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
21Angle Wrenches (continued)
No.
Torque Range (Soft Draw)In./Lb. (Nm)
Free SpeedRPM Length In. In. In.
Square Drive In.
Pkg. Wt.Lb. (kg)
5RLK2D65RLL2D65LL2D6*7RLL3D65RLN2D67RLM3D67RLN3D6
40 (4.6)55 (6.3)60 (6.8)
100 (11.3)110 (12.5)175 (19.8)265 (29.9)
1800130015001400600800500
10.1310.139.3811.0010.8811.6311.63
.53
.53
.53
.69
.53
.69
.69
1.311.311.311.501.311.501.50
3/83/83/83/83/83/83/8
2.69 (1.22)2.69 (1.22)2.38 (1.08)3.25 (1.47)
3 (1.36)3.5 (1.59)3.5 (1.59)
Stall • Std. Pkg. 1ReversibleLever Throttle (except as noted) Torque range (soft draw) 20 to 265 In./Lb. (2.3 to 29.9 Nm). Standard Equipment: Vertical hanger (Series 3 only). 7RLM3D6
Performance figures are at 90 PSI (620 kPa). * Nonreversible model.
IR
067
Series
AirIntake
NPT In.Air Hose
In.
SoundApprox.
dBA357
1/81/41/4
1/41/45/16
697580
No.50 PSI Pressure
Ft./Lb. (Nm)90 PSI Pressure
Ft./Lb. (Nm)
Reversible 6WRSL36WRSM36WRSN36WRSP36WRSQ38RSL326WRSR38RSM328RSN329RSM538RSP539RSN538RSQ539RSP539RSQ83
8SM328SN328SP539SQ83
3.8 (5.2)5.3 (7.2)6.4 (8.7)8.1 (11.0)
10.6 (14.4)12.0 (16.3)13.4 (18.2)15.0 (20.3)19.0 (25.8)25.0 (33.9)26.0 (35.3)32.0 (43.4)32.0 (43.4)39.0 (52.9)45.0 (61.0)
16.0 (21.7)21.0 (28.5)28.0 (38.0)50.0 (67.8)
6.7 (9.1)9.5 (12.2)11.5 (14.9)14.5 (19.0)19.0 (25.8)20.0 (27.1)24.0 (32.5)25.0 (33.9)33.0 (44.7)41.0 (55.6)45.0 (61.0)52.0 (70.5)53.0 (71.9)60.0 (81.4)85 (115.3)
25.0 (33.9)33.0 (44.8)44.0 (59.7)92 (124.8)
Torque Range (Soft Draw)
Pkg. Wt.Lb. (kg)
3 (1.36)3.25 (1.47)3.25 (1.47)3.25 (1.47)3.25 (1.47)5.5 (2.49)3.25 (1.47)5.5 (2.49)5.81 (2.64)6.56 (2.98)6.06 (2.75)7.19 (3.26)6.06 (2.75)7.19 (3.26)7.63 (3.46)
4.75 (2.15)5.06 (2.3)5.31 (2.41)6.69 (3.03)
Free SpeedRPM Length In. In. In.
SquareDrive In.
High Capacity Stall • Std. Pkg. 1 • Lever Throttle • Lever throttle torque range (soft draw) 3.8 to 92 Ft./Lb. (5.2 to 124.8 Nm).
6WRSQ38SM32 9RSP53
SeriesAir InletNPT In.
Air HoseIn.
689
1/41/21/2
3/81/21/2
11758257005504001200325930700665510535430425300
1110840610355
10.5011.2511.2511.2511.2516.1311.2516.1317.0016.7517.1317.7517.1317.7517.88
14.3815.2515.3815.88
.69
.69
.69
.69
.69
.67
.69
.67
.67
.86
.86
.86
.86
.86
.97
.67
.67
.86
.97
1.501.501.501.501.501.501.501.501.501.631.631.631.631.631.81
1.501.501.631.81
3/83/83/83/83/83/83/83/83/81/21/21/21/21/21/2
3/83/81/21/2
Nonreversible
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS22
No.
50 PSIPressure
Ft./Lb. (Nm)
90 PSIPressure
Ft./Lb. (Nm)Free Speed
RPMLength
In. In. In.Square Drive
In. Pkg. Wt.Lb. (kg)
6WRTL3
9TN53
6WTL3
6WTM3
6WTN3
6WTP3
6WTQ3
6WTR3
8TM32
8TN32
9TM53
8TP53
8TQ53
9TN53
9TP53
9TQ83
4.2 (5.7)
5.9 (8.0)
7.0 (9.5)
9.2 (12.5)
12.0 (16.3)
15.4 (20.9)
16.0 (21.7)
21.0 (28.5)
27.0 (36.6)
28.0 (38.0)
35.0 (47.5)
35.0 (47.5)
42.0 (57.0)
50.0 (67.8)
7.5 (10.2)
10.5 (14.2)
12.5 (16.9)
16.5 (22.4)
21.5 (29.2)
27.5 (37.3)
25.0 (33.9)
33.0 (44.8)
44.0 (59.7)
44.0 (59.7)
55.0 (74.6)
55.0 (74.6)
68.0 (92.2)
92.0 (124.8)
1450
1000
850
650
500
400
1110
840
780
610
520
630
500
355
10.63
11.38
11.38
11.38
11.38
11.38
15.75
16.63
16.5
16.75
16.75
17.50
17.50
17.63
.69
.69
.69
.69
.69
.69
.67
.67
.86
.86
.86
.86
.86
.97
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.63
1.63
1.63
1.63
1.63
1.81
3/83/83/83/83/83/83/83/81/21/21/21/21/21/2
3 (1.36)
3.25 (1.47)
3.25 (1.47)
3.25 (1.47)
3.25 (1.47)
3.5 (1.59)
5.38 (2.44)
5.69 (2.58)
6.5 (2.95)
5.94 (2.70)
5.94 (2.70)
7.06 (3.20)
7.06 (3.20)
7.5 (3.40)
6WRTL3
6WRTM3
6WRTN3
6WRTP3
6WRTQ3
6WRTR3
3.8 (5.2)
5.3 (7.2)
6.4 (8.7)
8.1 (11.0)
10.6 (14.4)
13.4 (18.2)
6.7 (9.1)
9.5 (12.2)
11.5 (14.9)
14.5 (19.0)
19.0 (25.8)
24.0 (32.5)
1250
875
750
550
425
350
11.38
12.13
12.13
12.13
12.13
12.13
.69
.69
.69
.69
.69
.69
1.50
1.50
1.50
1.50
1.50
1.50
3/83/83/83/83/83/8
3.25 (1.47)
3.5 (1.59)
3.5 (1.59)
3.5 (1.59)
3.5 (1.59)
3.5 (1.59)
Reversible
Nonreversible
High Capacity Shut-Off Std. Pkg. 1Lever throttle torque range (soft draw) 3.8 to 92 Ft./Lb.(5.2 to 125 Nm).
SeriesAir Inlet NPT In.
Air HoseIn.
689
1/41/21/2
3/81/21/2
Torque Range (Soft Draw)
IR
069
IR
070
Free SpeedRPM Length In. In. In.
SquareDrive In.
ClutchSpring*
Pkg. Wt.Lb. (kg)No.
Torque Range(Soft Draw) In./Lb. (Nm)
5RLK2C5
5RLL2C5
7RLL2C6
5RLN2C6
7RLL3C6
7RLM3C6
10-40 (1.1-4.6)
15-55 (1.7-6.3)
15-100 (1.7-11.3)
15-110 (1.7-12.5)
25-110 (2.8-12.5)
25-130 (2.8-14.8)
1800
1300
1400
600
1400
800
12.38
12.38
13.19
13.13
14.31
14.31
.53
.53
.53
.53
.69
.69
1.31
1.31
1.31
1.31
1.50
1.50
1/41/43/83/83/83/8
L
L
H
H
M
M
3.13 (1.42)
3.13 (1.42)
3.38 (1.53)
3.38 (1.53)
4.75 (2.15)
5 (2.27)
Adjustable Cushion Clutch Std. Pkg. 1 ReversibleLever Throttle Torque range(soft draw) 2 to 130 In./Lb. (.2to 14.8 Nm).
* Clutch spring: L = Light, M = Medium, H = Heavy. Performance figures are at 90 PSI (620 kPa).
SeriesAir Inlet
NPT In.
Air Hose In.
SoundApprox.
dBA5
7
1/81/4
1/45/16
75
80
Angle Wrenches (continued)
IR
071
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
23Electric Angle Screwdrivers / Wrenches
No.
Torque Range(Soft Draw) In./Lb. (Nm) Free Speed RPM Length In.
Side to CenterDistance In. Height In.
Pkg. Wt. Lb. (kg)
ES90T2S5
ES60T2S5
ES70T2S5
ES100T2S5
ES90T1S5*
ES60T1S5*
ES70T1S5
6-19 (.68-2.2)
6-23 (.68-2.6)
11-36 (1.2-4.1)
14-56 (1.6-6.3)
4-14 (.45-1.6)
4-17 (.45-1.9)
8-26 (.90-2.9)
1300
650
450
250
1850
950
650
16.89
16.89
16.89
16.89
16.70
16.70
16.70
.52
.52
.52
.52
.33
.33
.33
1.73
1.73
1.73
1.73
1.47
1.47
1.47
2.1 (.95)
2.1 (.95)
2.1 (.95)
2.1 (.95)
1.9 (.86)
1.9 (.86)
1.9 (.86)
ES90T2S3
ES60T2S3
ES70T2S3
ES100T2S3
6-19 (.68-2.2)
6-23 (.68-2.6)
11-36 (1.2-4.1)
14-56 (1.6-6.3)
1300
650
450
250
16.89
16.89
16.89
16.89
.52
.52
.52
.52
1.99
1.99
1.99
1.99
2.1 (.95 )
2.1 (.95)
2.1 (.95)
2.1 (.95)
Angle Screwdrivers 1/4" Female Hex Drive
IR Light-Duty • DC Electric Angle Wrenches and ScrewdriversPrecision Shut-Off • Std. Pkg. 1 • Torque range (soft draw) 6 to 56 In./Lb.Recommended for assembling where precise torque control is required. Similar inoverall design to the ES Series screwdrivers. These new models have all of the sameergonomic benefits and precision performance features of the standard screwdriverline. The tools incorporate a trigger start with automatic shut-off for precise torquecontrol, as well as a dynamic motor brake for reduced torque reaction. StandardEquipment: Two bits, two brushes, vertical suspension bail.
* This small head is designed for close quarter applications. Not intended for extensive counterclockwise use. Angle heads can rotate 360° for application adjustment. Torque output will vary with application.
Tools operate on standard 115 V AC current.
Angle Wrenches 1/4" Square Drive
ES70T2S3
ES60T1S5
Engraving Pen
IR
072
No.Blows Per Minute
Side-to-Center Distance In. (mm)Length In. (mm)
Pkg. Wt. Lb. (kg)
EP5018,7505/16 (.8)
55/8 (137).31 (.14)
Std. Pkg. 1 •Air Inlet 1/8"
Equipment at Extra Price: Fine point styles No. EP50-515 (Black); Medium point stylus No. EP50-516 (steel color); Coarse point stylusNo. EP50-517 (green); Hose assembly (includes 1/8" NPT fittings) No. DG100-130; Stylus grinding collet No. EP50-514.
IR
073
Std. Pkg. 1 • 1/4" NPT Inlet • Standard Equipment: Plain Retainer No. K2L-1190.
K2L Series ConfigurationA = Outside
trigger
Nozzle Type1 = Hex .380
2 = Round .680
Retainer TypeSA = Arrow
K2LA1 K2LA2SA
K2L A 1 A
Scalers
K2LA1None
18107/8 (276)
6 (2.72)
K2LA1SAPlain arrow
1812 (305)8 (3.63)
K2LA2None
18107/8 (276)
6 (2.72)
K2LA2SAPlain arrow
1812 (305)8 (3.63)
No.Chisel Retainer
CFMLength In. (mm)
Pkg. Wt. Lb. (kg)
With .580" Hex NozzleFor Use with Hex Shank Oval Collar Chisels
With .680" Round NozzleFor Use with Round Shank Oval Collar Chisels
Air Engraving Pen Kit • Std. Pkg. 1EP50K Engraving Pen Kit includes: No. EP50Engraving Pen (medium stylus standard) • Flexiblehose (DG1000-130: 6' x 3/16") • Three assortedstyluses (fine, medium, coarse) • Molded plasticcarrying case (No. DG10-RF).
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS24
IR
074
Chipping Hammers
2DA1SAHex220028
21/411.75 (5.33)
3DA1SAHex1900313
13.0 (5.90)
4DA1SAHex 1600344
14.0 (6.35)
2DA2SARound220028
21/411.75 (5.33)
3DA2SARound1900313
13.0 (5.90)
4DA2SARound 1600344
14.0 (6.35)
No.Chisel Bushing
Blows per MinuteAir SCFMStroke In.
Pkg. Wt. Lb. (kg)
“D” Series • Construction Duty / 4 Bolt • Std. Pkg. 1 Time tested valve design • Die cast aluminum handle • Directional exhaust • Tease throttle Over-molded steel collar • Available in 2, 3, or 4 in. stroke • Choice of .580 hex or .680 round shank • Accepts oval collar accessories.
SeriesW = Heavy-
duty Series
Length of Stroke1" 3"2" 4"
ConfigurationA = Outside
trigger
Nozzle Type1 = Hex .580"
2 = Round .680"
Chipper Series Chipper Series
With .580" Hex NozzleUses Hex Shank Round Collared Accessories
With .680" Round Nozzle Uses Round Shank Round Collared Accessories
W2A2W1A1
No.Piston Stroke In. (mm)
CFMLength In. (mm)
Pkg. Wt. Lb. (kg)
W1A11 (25)
28157/8 (403)
15 (6.8)
W2A12 (51)
28163/8 (416)16 (7.26)
W3A13 (76)
29181/4 (464)17 (7.71)
W4A14 (102)
29191/4 (489)18 (8.16)
W1A21 (25)
28157/8 (403)
15 (6.8)
W2A22 (51)
28163/8 (416)16 (7.26)
W3A23 (76)
29181/4 (464)17 (7.71)
W4A24 (102)
29191/4 (489)18 (8.16)
Threaded Barrel, Heavy-Duty Chippers • Std. Pkg. 1 • 3/8" NPT InletStandard Equipment: Rubber Buffered Retainer No. HHW1-A300 • Equipment at extra price: Strap-On Muffler No. HHW1-A674
W1 1 Chipping of light gray iron castings; paper box stripping.W2 2 Chipping of heavy gray iron castings; chipping
aluminum and other non-ferrous metals; chipping of steel billets; chipping light steel weld seams; concreteroughing.
W3 3 Chipping of steel castings; chipping heavy steel weldseams; concrete roughing.
W4 4 Chipping of alloy steel; light concrete demolition.
W 1 A 1IR
075
No.Piston Stroke In. (mm)
CFMLength In. (mm)
Pkg. Wt. Lb. (kg)
1A1S1 (25)
28131/2 (343)12.75 (5.78)
1A1SA1 (25)
28151/2 (394)14.75 (6.69)
2A1S2 (51)
2814 (356)
13.13 (5.95)
2A1SA2 (51)
2816 (406)
15.13 (6.86)
3A1S3 (76)
29157/8 (403)14.63 (6.63)
3A1SA3 (76)
29177/8 (454)16.63 (7.54)
4A1S4 (102)
29167/8 (429)15.5 (7.03)
4A1SA4 (102)
29187/8 (480)17.5 (7.94)
Length of Stroke1" 3"2" 4"
ConfigurationA =
Outside trigger
Nozzle Type1 = Hex .380"
2 = Round .680"
Retainer TypeS = NoneSA = Plain
With .580" Hex Nozzle • Uses Hex Shank Oval Collar Chisels
1A2SA2A1S 1 A 1 S
Grooved Barrel, Standard Duty Chippers • Std. Pkg. 1 • 3/8" NPT InletStandard Equipment: Plain retainer with metal lock spring on all models ending in A.Equipment at extra price: Plain Retainer No. HH1-1190, Metal Lock Spring No. HH1-1194, Plastic Lock Ring No. ER-1194.
IR
076
1A2S1 (25)
28131/2 (343)13.75 (5.78)
1A2SA1 (25)
28151/2 (394)14.75 (6.69)
2A2S2 (51)
2814 (356)
13.13 (5.95)
2A2SA2 (51)
2816 (406)
15.13 (6.86)
3A2S3 (76)
29157/8 (403)14.63 (6.63)
3A2SA3 (76)
29177/8 (454)16.63 (7.54)
4A2S4 (102)
29167/8 (429)15.5 (7.03)
4A2SA4 (102)
29187/8 (480)17.5 (7.94)
No.Piston Stroke In. (mm)
CFMLength In. (mm)
Pkg. Wt. Lb. (kg)
HH1-1190Plain
.8 (.36)
HH1-1191Arrow quick change
.7 (.32)
HH1-3400-3Ajax quick change
2.25 (1.02)
No.Type
Pkg. Wt. Lb. (kg)
With .680" Round Nozzle • Uses Round Shank Oval Collar Chisels
Retainers • Std. Pkg. 1 • For use on Series 1, 2, 3, 4 grooved barrel chippers • Includes lock springs.IR
077
IR
082
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
25Chipping Hammers (continued)
HH1-A1653/8" x 1/2" Hose nipple
No.Description
Swivel Inlet • Std. Pkg. 1For use with chippers, diggers, saws, air hammers and demolition tools.Adaptable to 1/2" NPT by removing 3/8" fitting.
IR
078
IR
079
IR
080
Std. Pkg. 1Standard-Duty
No.Chisel Shank Dia. In.
Stroke Length In.Blows Per Min.
CFMAir Inlet In.
Pkg. Wt. Lb. (kg)
Air Hammers
Std. Pkg. 1 • Super-Duty
Chisel KitNo.Chisel Shank Dia. In.
Stroke Length In.Blows Per Min.
CFMAir Inlet In.
Pkg. Wt. Lb. (kg)
115.40115/85000
21/4
3 (1.36)
116.40125/83500
31/4
4 (1.81)
117.40131/22000
31/4
5.5 (2.49)
132.401
41725
31/4
3.5 (1.59)
IR
081
772For light-duty cutting & hammering
Offset12
3.63 (1.65)
No.PurposeHandle
CFMPkg. Wt. Lb. (kg)
Lightweight Hammer • Std. Pkg. 1 Standard Equipment: Quick ChangeRetainer (AVC1-83) and Beehive retainer (AVC10-183A) • .401 shank.
Lightweight Hammer
AVC10A1AVC10C1AVC12A1AVC13A1AVC26A1AVC26B1
772
1/8 (3)1/8 (3)3/16 (5)1/4 (6)
3/8 (10)3/8 (10)
1/8 (3)1/8 (3)3/16 (5)1/4 (6)5/16 (8)5/16 (8)
OffsetButtonOffsetOffsetOffsetPistol
6 (152)625/32 (172)73/4 (197)83/4 (222)
115/16 (287)1315/16 (354)
73/8 (187)
17/8 (48)17/8 (48)3 (76)4 (101)6 (152)6 (152)
21/4 (57)
3200 3200 21001725 1120 1120
3000
9/16 (14)9/16 (14)9/16 (14)9/16 (14)3/4 (19)3/4 (19)
3/4 (19)
.401
.401
.401
.401
.498
.498
.401
2.19 (.99)2.06 (.94)3.38 (1.53)3.69 (1.67)5.13 (2.32)
7 (3.18)
3.63 (1.64)
AVC12A1
For light-duty cutting & hammering offset
General Purpose
Industrial/Aerospace
Cold Rivet Cap. Dia.
Lightweight Riveters • Std. Pkg. 1 • For driving 1/8"-3/8" (3-10 mm) rivets. Accurateand easily controlled tease throttle. Standard beehive retainer – allows use of a widevariety of accessories. Built-in power regulators on A1 and B1 Models – the operatorcan change power on the job with no downtime. No. 772 – Unitized "easy-out"throttle valve assembly. No. 772 – Furnished with two retainers for use with a widevariety of accessories.
AVC10C1
Air Inlet = 1/4" NPT. Recommended hose = 5/16" (8 mm). AVC 26 use 1/2" (13 mm). Performance figures are at 90 PSI (620 kPa).
Riveters
No.Aluminum In. (mm)
Dural & SoftIron
In. (mm) Handle
Length LessAcces.
In. (mm)
PistonStroke
In. (mm)Blows per
MinuteBore
In. (mm)
For Use w/Rivet Shank
Dia. In.Pkg. Wt. Lb. (kg)
WARNING: Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting anyaccessory on this tool, or before performing any maintenance on this tool.
WARNING: Air powered tools can vibrate in use. Vibration, repetitive motions or uncomfortable positions may be harmfulto your hands and arms. Stop using any tool if discomfort, tingling feeling or pain occurs. Seek medical advice beforeresuming use.
116 – K5With .401" Shank Diameters.Kit includes: Edging tool, tailpipe cutter, straight chisel,
cutting chisel, punch.
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS26
AV1-22S-16Soft blanks
1/2 (13).12 (.05)
AV1-22S-20Soft blanks
5/8 (16).12 (.05)
AV1-22S-24Soft blanks
3/4 (19).12 (.05)
AV1-22S-28Soft blanks
7/8 (22).12 (.05)
No.Type
Size of Rivet In. (mm)Pkg. Wt. Lb. (kg)
Jackset Soft Blanks
AV24-222S-26Soft blank13/16 (21).36 (.16)
AV1-22S-20Soft blank13/16 (30).24(.16)
No.Type
Size of Rivet In. (mm)Pkg. Wt. Lb. (kg)
IR
083
IR
084
Lightweight Riveter Accessories • Std. Pkg. 1 • Jacksets with .498" Diameter shanks for Series AVC 26 riveters.
Jackset Soft Blanks
Lightweight Riveters
AV1-22H-3Universal head
3/32 (2).18 (.08)
AV1-22H-5Universal head
5/32 (4).18 (.08)
AV1-22H-6Universal head
3/16 (5).18 (.08)
AV1-22H-8Universal head
1/4 (6).18 (.08)
No.Type
Size of Rivet In. (mm)Pkg. Wt. Lb. (kg)
Lightweight Riveter Accessories • Std. Pkg. 1 • Jacksets with .401" Diameter shanks for Series AVC 10, AVC 12, AVC 13 riveters.
FinishedJacksets
AV1-126D FlushHead Jackset
IR
085
Driving 1/8"-3/8" (3-10 mm) Rivets • Std. Pkg. 1 • 1/4" NPT Inlet • Standard Equipment: All tools have Beehive type retainer No. AVC1-83 (for No. AVC10, 12, B); No. AVC24-283 (for No. AVC26). All tools have .401 shank except 26 Series has .498.
AVC10A11/8 (3)1/8 (3)
12 2.06 (1.28)
AVC10C11/8 (3)1/8 (3)
12 2.06 (.94)
AVC12A13/16 (5)3/16 (5)
13 3.38 (1.53)
AVC13A11/4 (6)1/4 (6)
133.69 (1.67)
AVC26A13/8 (10)5/16 (8)
14 5.13 (2.32)
AVC26B13/8 (10)5/16 (8)
14 7 (3.18)
No.Aluminum In. (mm)
Dural and Soft Iron In. (mm)CFM
Pkg. Wt. Lb. (kg)
SeriesAVC
Length ofStroke
10 1213 26
Handle TypeA1 = Offset B1 = Grip
C1 = StraightAVC10C1
AVC12A1AVC26B1
AVC 10 A1
IR
086
IR
087
Rammers
For Model 130A1M 1/2" Tapered rod
For Model 241A1M 5/8" Tapered rod
No.Butt Description
Pkg. Wt. Lb. (kg)
No.Butt Description
Pkg. Wt. Lb. (kg)
12SR-83Malleable
21/2" (64 mm) Dia.1.2 (.54)
14SR-83R-23/8Rubber tipped
23/8" (60 mm) Dia. .8 (.36)
14SR-83R-4Rubber topping-off
329/32" (99 mm) Dia.1.4 (.64)
14SR-93RRubber tipped
peen.65 (2.9)
Equipment at Extra Price:
22SR-83-3x3/4Malleable
3" (76 mm) Dia.1.4 (6.4)
24SR-83R-3Rubber tipped
3" (76 mm) Dia.1.4 (.64)
24SR-83R-5Rubber tipped
5" (127mm) Dia.1.85 (.84)
No.TypeCFM
Lgth. with Butt In. (mm)Pkg. Wt. Lb. (kg)
Rammers • Std. Pkg. 1 • Standard Equipment: Lever throttle Model 130A1M has 21/2" (64 mm) malleable butt; Model 241A1M has 3" (76 mm) malleable butt • Round piston rod. Built-in muffler • Model 241A1M has built-in lubricator • Model 130A1M has 1/4" NPT air inlet; Model 241A1M has 3/8" NPT air inlet.
130A1M241A1M
130A1MBench
14211/2 (546)11.56 (5.24)
241A1MFloor29
523/4 (1340)26.87 (12.2)
IR
088
Tie TampersNo.
CFMBlows per Minute In.
Length With Butt In. (mm)Pkg. Wt. Lb. (kg)
MT49
1400291/4 (743)
40.125 (18.3)
IR
089
Std. Pkg. 1 • 3/4" Air Inlet
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
27
No.Description
Length In. (mm)Face Width In. (mm)
Pkg. Wt. Lb. (kg)
MT2-12-3/8Plain face, for spot
tamping and low lifts24 (610)3 (76)
1.6 (0.73)
MT2-12-5/8Plain face, for rock
ballast of 29 mesh or larger24 (610)3 (76)
2.4 (1.09)
MT2-12-7/8Plain face, for small rock ballast,
gravel and slag24 (610)3 (76)
2.8 (1.27)
No.Description
Length In. (mm)Face Width In. (mm)
Pkg. Wt. Lb. (kg)
MT2-12-3/4Plain face, for dirt, cinder, gravel,
sand or chat ballast24 (610)3 (76)
2.7 (1.22)
MT2-S12-5/8Toothed face, for stone
ballast24 (610)3 (76)
2.4 (1.09)
MT2-12-11/8Plain face, for dirt, cinder, gravel,
sand or chat ballast 24 (610)3 (76)
3.3 (14.97)
Tie Tamper Steels
Tie Tampers (continued)
IR
090
Std. Pkg. 1 • Built-in lubricator • Model 341A2M: 7/8" Threaded tapered rod; No. 441A2: 1" Threaded tapered rod • Built-in muffler on Model 341A2M • Round piston rod • Malleable lock-type butt Model 34SR-M-183-53/4 for 341A2M • Standard malleable lock-type 53/4 butt for No. 44IA2 (No. 44SR-M183-53/4) • Both tampers have 3/8" NPT air inlet.
341A2M
441A2
Tampers
No.Butt Diameter In. (mm)
CFMLength With Butt In. (mm)
Pkg. Wt. Lb. (kg)
341A2M53/4 (146)
29523/4 (1340)35 (15.88)
441A253/4 (146)
36507/8 (1292)47.13 (21.4)
IR
091
Air Cutting Tools
Std. Pkg. 1
No.Free Speed RPM
Thread/Collect Size In.CFM
Air Inlet In.Pkg. Wt. Lb. (kg)
30216,000
1/43
1/41 (.45)
30825,000
1/43
1/41.13 (.51)
32618,000
–101/4
2.38 (1.08)
IR
092
Heavy - Duty Air Cut-Off ToolChrome-plated steel spark guard
which can rotate 360°.
Heavy-Duty Air Die Grinder
Heavy-Duty Air Angle Die Grinder
Heavy-Duty Air Shear • Shearsmost types of plastics and all typesof aluminum, tin, and steel up to20 gauge. Replacement parts: Leftblade 7802S-6022L; cutter blade7802S-6021; right blade 7802S-6022R.
Heavy-Duty Air ReciprocatingSaw • A versatile air saw for cutting intricate shapes and lightradius curves in all types of plastics, fiberglass, and compositematerials, as well as aluminumand sheet metal • Comes with sixhigh-speed steel cutting bladesand two hex wrenches.
Heavy-Duty Air Nibbler • Thetool actually "nibbles" cold rolledsteel, plastic, tin, aluminum, andother metals, up to 18 Gaugethicknesses. Replacement parts:cutter die IR325-354; cutterIR325-350.
Std. Pkg. 1
No.Strokes Per Min.
CFMAir Inlet In.
Pkg. Wt. Lb. (kg)
7802S4200
41/4
2.75 (1.25)
42910,000
81/4
1.32 (.060)
325–4
1/43 (1.36)
IR
093
Check the Abrasives & Cutting Toolssection of this catalog for a great
selection of saw blades.
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS28
No.Free Speed
RPMRated Power
HPLength
In.Pkg. Wt. Lb. (kg)
Standard Equipment: 1/4" Erickson collet DG110-700-G4 (C), G160HD-700-1/4 (T and H); collet body wrench125C-69 (C), DG10-69 (T and H); collet nut wrench DG20-69 (C), DG120-69 (T and H) • G4 = 1/4" Ericksoncollet • Air Inlet: All models 1/4" NPT. To order front exhaust, replace R with F in model number. To orderlocking lever, add L to end of model number. To order concentric / low profile flange, add C to end of modelnumber. Example: CD200FG4LC.
Straight ExtendedGrinders Carbide Bur andMounted WheelCyclone Std. Pkg. 1
CX200RG4
CX250RG4
CX300RG4
20,000
25,000
30,000
.35
.35
.35
93⁄16
93⁄16
93⁄16
1.19 (.54)
1.19 (.54)
1.19 (.54)
TX120RG4
TX180RG4
TX200RG4
TX250RG4
12,000
18,000
20,000
25,000
.70
.70
.70
.70
127⁄16
127⁄16
127⁄16
127⁄16
2.63 (1.19)
2.63 (1.19)
2.63 (1.19)
2.63 (1.19)
HX120RG4
HX150RG4
HX180RG4
12,000
15,000
18,000
1.00
1.00
1.00
135⁄16
135⁄16
135⁄16
2.88 (1.31)
2.88 (1.31)
2.88 (1.31)
CX250RG4
IR
094
HX180RG4
TX250RG4
Cyclone Straight GrindersProduct Identification Guide Typical Model
C D 3 5 0 R G 4 L
SeriesC = .35 CycloneT = .70 CycloneH = 1.0 Cyclone
AccessoriesL = Locking lever
C = Concentric range
TypeD = Die grinder
X = ExtendedA = Angle
XA = Extended angleXD = 2" Extended
Spindle TypeG4 = 1⁄4" Collet
S4 = 1⁄4" .20 THD (angle)H63 + P63 = 3" GuardedH64 + P64 = 4" Guarded
H66 = 6" GuardedP1045 = 41⁄2" Guarded
RPMX100 =
Rated RPM
ExhaustR = RearF = Front
No.Free Speed
RPMRated Power
HPLength
In.Pkg. Wt. Lb. (kg)
Carbide Bur and Mounted Wheel • Cyclone • Std. Pkg. 1 • Standard Equipment : 1/4" Erickson collet G160HD-700-1/4 (T and H),DG110-700-G4 (C); 7/16" collet body wrench 125C-69; 11/16" collet nut wrench DG20-69 • LGI Kit Includes: DG10-RF Case (41/4 x 93/4"); DG20-RF 20 (9" foam insert); 73/4" molded part; IRSD-1 bur (1/4" ball); IRSF-1 bur (1/4" tree radius); IRSA-1 bur (1/4" cylindrical); IRSL-1 Bur (1/4" cone); G4 =1/4" Erickson collet • Air Inlet: All models 1/4" NPT. To order front exhaust, replace Rwith F in model number. To order locking lever, add L to end of model number. To order concentric / low profile flange, add C toend of model number. Example: CD200FG4LC.
CD200RG4
CD250RG4
CD250RG4K
CD300RG4
CD350RG4
20,000
25,000
25,000
30,000
35,000
.35
.35
.35
.35
.35
63⁄16
63⁄16
63⁄16
63⁄16
63⁄16
.81 (.37)
.81 (.37)
.81 (.37)
.81 (.37)
.81 (.37))
TD120RG4
TD180RG4
TD200RG4
TD250RG4
TD250RG4K
12,000
18,000
20,000
25,000
25,000
.70
.70
.70
.70
.70
73⁄4
73⁄4
73⁄4
73⁄4
73⁄4
1.63 (.74)
1.63 (.74)
1.63 (.74)
1.63 (.74)
1.63 (.74)
HD120RG4
HD150RG4
HD180RG4
HD180RG4K
12,000
15,000
18,000
18,000
1.00
1.00
1.00
1.00
89⁄16
89⁄16
89⁄16
89⁄16
1.88 (.85)
1.88 (.85)
1.88 (.85)
1.88 (.85)
CD350RG4
TD180RG4
HD180RG4
IR
095
CA200RG4 TA180RG4
CA200RP63TA180RP63TA120RP64
HA120RP1045*HA120RP105HA120RP64
HARP64
20,00018,00012,00012,00012,00012,0009000
.35
.70
.701.001.001.001.00
61⁄16
711⁄16
711⁄16
813⁄16
813⁄16
813⁄16
813⁄16
1.57 (.71)2.57 (1.16)2.69 (1.22)
3 (1.36)3.13 (1.42)2.63 (1.19)2.63 (1.19)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
29Cyclone Angle Grinders
Angle Grinders • Type 27, 28, and Type 1 Wheel • CycloneStd. Pkg. 1 • Standard Equipment: Wheel guard, flanges and nut; spindleand wheel nut wrenches. P63 = 3/8"-24 spindle, 3" guard; P1045 = 5/8"-11spindle, 41/2" guard; P64 = 3/8"-24 spindle, 4" guard; P105 = 5/8"-11 spin-dle, 5" guard; H66 = 3/8"-24 spindle, 6" guard • Air Inlet: All models 1/4"NPT. To order front exhaust, replace R with F in model number. To orderlocking lever, add L to end of model number. To order concentric / lowprofile flange, add C to end of model number. Example: CD200FG4LC.HXA120RP64
TXA135RP64TX135RH64LEHXA120RP64
HXA120RP1045*HXAX125RH66
13,50013,50012,00012,00012,500
.70
.701.001.001.00
103⁄8103⁄8
1113⁄16
1113⁄16
11
2.57 (1.33)3.13 (1.42)3.81 (1.73)3.88 (1.76)4.25 (1.93)
No.Free Speed
RPMRated Power
HPLength Along Throttle In.
Pkg. Wt. Lb. (kg)
Extended Angle Grinders
AccessoriesStd. Pkg. 1
DG110-700-G2DG110-700-G4
–––
RO-130LG1-K284
–DG120-86DG120-16
–G160HD-700-1/4DG120-700-G6
DG10-69DG120-69R1A-130
LG2-K284–
DG120-86DG120-16
DG110-700-G2DG110-700-G4
–DG10-69DG120-69R1A-130
LG2-K284–––
Series CA, CD and CX
No.
Series TA, TD, HA, HD, HXand HXA
No.Series TXA
No.1/8" Erickson Collet1/4" Erickson Collet3/8" Erickson Collet
Collet Body WrenchCollet Nut Wrench
Inlet Hose AssemblyExhaust Hose Assembly
Side Handle Kit3" x 4" Type 1 Inner Wheel Flange3" x 4" Type 1 Outer Wheel Flange
* Available for angle tools only.
No.Free Speed
RPMRated Power
HPLength Along Throttle In.
Pkg. Wt. Lb. (kg)
Carbide Bur and Mounted Wheel • Cyclone • Std. Pkg. 1 Standard Equipment: 1/4" Erickson collet; collect body wrench; collectnut wrench • G4 = 1/4" Erickson collet • Air Inlet: All models 1/4"NPT. To order front exhaust, replace R with F in model number. Toorder locking lever, add L to end of model number. To order concentric / low profile flange, add C to end of model number.Example: CD200FG4LC.
CA120RG4CA200RG4TA120RG4TA180RG4HA90RG4HA120RG4
TXA135RG4
12,00020,00012,00018,0009000
12,000
13,500
.35
.35
.70
.701.001.00
.70
61⁄16
61⁄16
713⁄16
713⁄16
813⁄16
813⁄16
103⁄8
1.31 (.59)1.31 (.59)2.38 (1.08)2.38 (1.08)2.63 (1.19)2.63 (1.19)
2.63 (1.19)
Extended Angle Grinders
IR
096
IR
097
CA200RP63
TDS120RG4TDS90RG4TDS45RG4TDS30RG4TDS15RG4HDS90RG4HDS60RG4HDS45RG4HDS30RG4HDS10RG4
CA120RS4CA200RS4TAS90RG4TAS90RS10TAS60RG4TAS60RS10TAS32RS10HAS90RS10HAS60RG4HAS60RS10HAS60RS10HAS30RS10HAS18RS10
1⁄4" Collet1⁄4" Collet1⁄4" Collet1⁄4" Collet1⁄4" Collet1⁄4" Collet1⁄4" Collet1⁄4" Collet1⁄4" Collet1⁄4" Collet
1⁄4" - 201⁄4" - 20
1⁄4" Collet5⁄8" - 11
1⁄4" Collet5⁄8" - 115⁄8" - 115⁄8" - 11
1⁄4" Collet5⁄8" - 115⁄8" - 115⁄8" - 115⁄8" - 11
12,000900045003000150090006000450030001000
12,00020,00090009000600060003200900060006000450030001800
1031⁄16
131⁄16
123⁄16
123⁄16
131⁄16
133⁄4133⁄4127⁄8127⁄8133⁄4
61⁄16
61⁄16
1111
131⁄2131⁄2123⁄4112⁄3143⁄16
143⁄16
143⁄16
133⁄8133⁄8
3.81 (1.73)3.81 (1.73)3.56 (1.61)3.56 (1.61)3.81 (1.73)4.13 (1.87)4.13 (1.87)3.81 (1.73)3.81 (1.73)4.13 (1.87)
1.31 (.59)1.31 (.59)
3.31 (1.50)3.31 (1.50)4.75 (2.15)4.75 (2.15)4.38 (1.98)
4 (1.81)4.93 (2.24)4.93 (2.24)4.93 (2.24)4.56 (2.25)4.56 (2.25)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS30CycloFinish Sanders / Polishers / Buffers
Straight Tools
Std. Pkg. 1Standard Equipment:Collet Models: Erickson collet, collet wrenches • T & H models: Ergo handle• Air Inlet: 1/4" NPT. To orderyour CycloFinish tool presetfor front exhaust, refer to themodel number and substituteF for R.
No.Belt
Size In.Length with BeltAttachment In.
Max. Free Speed RPM
Pkg. Wt. Lb. (kg)
Std. Pkg. 1 • Air Inlet: All models 1/4" NPT. To order your CycloFinish tool preset for front exhaust, refer to the model number aboveand substitute F for R.
• LG1-SB418-60-10, 60 Grit 1/4" x 18" • LG1-SB418-80-10, 80 Grit 1/4" x 18" • LG1-B418-100-10, 100 Grit 1/4" x 18"
• LG1-SB818-60-10, 60 Grit 1/2" x 18" • LG1-SB818-80-10, 80 Grit 1/2" x 18" • LG1-SB818-100-10, 100 Grit 1/2" x 18"
• LG1-SB812-60-10, 60 Grit 1/2" x 12" • LG1-SB812-80-10, 80 Grit 1/2" x 12" • LG1-SB812-100-10, 100 Grit 1/2" X 12"
CA120RS812CA120RS418CA120RS818CA200RS812CA200RS418CA200RS818
1/2 x 121/4 x 181/2 x 181/2 x 121/4 x 181/2 x 18
103⁄41414
103⁄4
1414
12,00012,00012,00020,00020,00020,000
1.5 (.68)1.63 (.74)1.75 (.79)1.5 (.68)1.63 (.74)1.75 (.79)
CA120RS812
CycloFinish Belt Sanders
Accessories • Std. Pkg. 1No.
Description
Pkg. Wt. Lb. (kg)
Note: Attachments may be mounted on either a CA120RG4 or CA200RG4 Cyclone tool.
LG1-K284Rear exhaust
Kit.08 (.036)
DG110-700-G2Erickson
collet 1/8".01 (.005)
LG1-A350-8121/2" x 12" Belt
sander attachment.06 (.027)
LG1-A350-8181/2" x 18" Belt
sander attachment.08 (.036)
LG1-A350-4181/4" x 18" Belt
sander attachment.06 (.027)
IR
098
IR
099
No. Standard SpindleMax. Free Speed
RPMOverall
Length In.Pkg. Wt. Lb. (kg)
Angle Tools
Sanding Belts • Std. Pkg. 1
Note: Surface feet per minute at 12,000 RPM = 2700, Surface feet per minute at 20,000 RPM = 4500
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
31
18,000-25,000 RPM • Cyclone • Std. Pkg. 1 Standard Equipment: Erickson collet, collet bodywrench, collet nut wrench, coupling nut wrench. Air inlet: All models 1/4" NPT.
Cyclone Router Trimmers
No.Bit Shank
In.Free Speed
RPM
Length without BitGuide In.
Pkg. Wt. Lb. (kg)
TD200RT4TD200RT6TD250RT4TD250RT6HD180RT4HD180RT6
1/43/81/43/81/43/8
20,00020,00025,00025,00018,00018,000
83/883/883/883/893/1693/16
2.38 (1.08)2.38 (1.08)2.38 (1.08)2.38 (1.08)2.5 (1.13)2.5 (1.13)
R120-128-2R120-128-7LG2-129-1
1/41/43/8
11/221/221/2
3/81/21/2
3/81/25/8
1/83/161/8
No.For Bits with
Shank Size In.AIn.
BIn.
CIn.
DIn.
TD250RT4
Trimmer Guides Guides for 1/4" models have 1/2"-20 UNF thread • Guides for 3/8" Modelshave 5/8"-18 UNF thread.
HD 180 R T 6
SeriesTD = .7 HPHD = 1.0 HP
ProductDesignationT = Trimmer
Collet Size4 = 1⁄4" 6 = 3⁄8"
Free Speed, RPM180 = 18,000200 = 20,000250 = 25,000
ExhaustR = Rear
Product Identification GuideTypical Model
BA
DC
IR
100
Straight Grinders
No.Wheel
Size In.Free Speed
RPMRated
Power HP HandlePkg. Wt.† Lb. (kg)
61H120H6361H120H6461H150H6377H120H6377H90H8477H120H84
88HL60H106*88HG60H106*99HL60H106*99HG60H106*99HL45H108**99HG45H108**99HL60H108**
3 x 1/24 x 1/23 x 1/23 x 1/24 x 1/24 x 1/26 x 16 x 16 x 16 x 18 x 18 x 18 x 1
12,00012,00015,00012,0009000
12,0006000600060006000450045006000
1.251.251.331.501.501.502.002.003.003.002.352.353.00
LeverLeverLeverLeverLeverLeverLeverGripLeverGripLeverGripLever
4.75 (2.15)4.75 (2.15)4.75 (2.15)6.13 (2.78)6.13 (2.95)6.13 (2.95)11.31 (5.13)11.69 (5.30) 13.5 (6.12)14.93 (6.49)14.81 (6.44)15.63 (7.09)14.81 (6.72)
99L60H108
Type 1 Wheel • Pro Series • Std. Pkg. 1 • Standard Equipment:Wheel guard, flanges and nut. H64 = 3/8"-24 spindle, 4" guard;H84 = 1/2"-13 spindle, 4" guard; H106 = 5/8"-11 spindle, 6"guard; H108 = 5/8"-11 spindle, 8" guard • Air Inlet: Series 61Hand 77H, 3/8" NPT. Series 88H and 99H, 1/2" NPT.
* Net weight of guard and flanges is 3.2 Lb. (1.45 kg). ** Net weight of guard and flanges is 4.5 Lb. (2.04 kg). † With guards & flanges.
77H120H84
88HG60H106
No.Free Speed
RPMRated Power
HPLength
In.Pkg. Wt. Lb. (kg)
Carbide Bur and Mounted Wheel • Pro Series • Std. Pkg. 1 • Standard Equipment: G160HD-700-1/4, 1/4" Erickson collet.DG10-69, collet body wrench • DG120-69, collet nut wrench • G4 =1/4" Erickson collet • Air Inlet: Both models 3/8".
61H120G461H150G4
12,00015,000
1.251.33
151⁄2151⁄2
41⁄4 (1.93)41⁄4 (1.93)61H120G4
IR
101
IR
103
Cone and Plug Wheel • Pro Series • Std. Pkg. 1L6 = 3/8"-24" spindle; L10 = 5/8"-11" spindle.Air inlet: Series 88H, 1/2" NPT. All others 3/8" NPT.
61H120L6
88HL90L10
No.Free Speed
RPMRated
Power HPLength
In.Pkg. Wt. Lb. (kg)
61H120L661H150L677H90L1077H120L1088HL90L10
12,00015,0009000
12,0009000
1.251.331.501.502.20
143⁄4143⁄4167⁄16
167⁄16
181⁄4
41⁄4 (1.92)41⁄14 (1.92)
6 (.85)6 (.85)
83⁄8 (3.80)
IR
102
No.
For Type 6 & 11 Wheels
Size In.Free Speed
RPMRated Power
HPPkg. Wt.Lb. (kg)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS32
No.
For Type 27 & 28
Wheels Size In.Free
Speed RPMRated
Power HPPkg. Wt. Lb. (kg)
88V60P10788V60P10988V77P10799V60P10799V60P10999V77P107
797797
600060007700600060007700
2.12.12.23.03.03.0
83/4 (3.97)91/16 (4.11)83/4 (3.97)111/4 (5.10)
115/16. (5.13)111/4 (5.10)
77A60P10777A60P10977A75P107
797
600060007500
1.51.51.5
9 (4.08)93/16 (4.17)93/16 (4.17)
77A60P109
99V60P109
Vertical Grinders • Air inlet 1/2" NPT.
Angle Grinders • Air inlet 3/8" NPT
Vertical Grinders
IR
104
Depressed Center Wheel Type 27 and 28Wheel Pro Series • Std. Pkg. 1Standard Equipment: Wheel guard, flangesand nut for threaded depressed centerwheels. P107 = 5/8"-11 spindle, 7" guardP109 = 5/8"-11 spindle, 9" guard.
88V60S106 99V60S106
–88V60-A216
99V60-A216A
––
99V60-K184
88V-56288V-562
–
77H-95088V60-95099V60-950
88V60S10699V45S10699V60S106
5 or 65 or 65 or 6
600045006000
2.12.53.0
83⁄8 (3.80)103⁄4 (4.88)103⁄4 (4.88)
AccessoriesStd. Pkg. 1
Accessories • Depressed Center • Wheel Type 27 and 28 Wheel • Pro Series • Std. Pkg. 1
Cup Wheel Type 6 and 11 Wheel • Pro Series • Std. Pkg. 1Standard Equipment: Wheel guard, flanges and nut. S106 = 5/8" - 11 spindle, 6" guard. Air inlet: All models 1/2" NPT.
Series 77A No. Series 88V No. Series 99V No.
7" Type 27Wheel Guard
9" Type 27 WheelGuard
Piped-Away Exhaust Kit
Wheel RetainingScrew Wrench
Controller Wrench
88V60-106-799V77-106-7
88V60-106-999V60-106-9
88V60-K18499V60-K184
88V-56288V-562
88V60-95099V60-950
Series 88V No.Series 99V No.
IR
105
IR
106
6" Type 6 or 11 Cup Wheel Guard
Piped-Away Exhaust Kit
Wheel Retaining Screw Wrench
Controller Wrench
Series61778899
ThrottleL = Lever G = Grip
Pro Series Tool FeaturesTypical Model Number
IR
107
See next page for Pro Series.
Type of WheelG = Collet
H = Type 1 wheelL = Cone wheel
P = Type 27 wheelS=Typewheel
77A25F10777A45W10977A60W107
250045006000
1.51.51.5
179⁄16179⁄16179⁄16
8.38 (3.80)7.88 (3.54)7.88 (3.54)
Angle Sanders / Polishers / Buffers
IR
108
No. Free Speed RPM Rated Power HP Length In. Pkg. Wt. Lb. (kg)
Pro Series • Std. Pkg. 1 • Standard Equipment: Back-up pads, 77A-AM825-5", 77A-AM825-7" medium; 77A-BM825-1" firm; 77A-A825-9" P500-850, polishing bonnet (No. 77A25F107 only); F107= 5/8"-11 spindle, 7" polishing bonnet; W107 = 5/8"-11 spindle,
7" back-up pad; W109 = 5/8"-11 spindle, 9" back-up pad • Air Inlet: All models 3/8" NPT.
88 H L 60 H 10 6
TypeA = AngleH = HorizontalV = Vertical
Diameter of Wheel or Collet4C = 1⁄4" Collet 3 = 3" Wheel4 = 4" Wheel 6 = 6" Wheel7 = 7" Wheel 8 = 8" Wheel9 = 9" Wheel
45 = 4,50060 = 6,00077 = 7,700
90 = 9,000120 = 12,000150 = 15,000
Diameter andThread of Arbor
6 = 3⁄8" - 24 Thread8 = 1⁄2" - 13 Thread10 = 5⁄8" - 11 Thread
Product Identification Guide
Free Speed
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
33
77H30B106
Pro Series Accessories
No.Free Speed
RPMRated Power
HPHeight Over
End of Arbor In.Pkg. Wt. Lb. (kg)
Pro Series • Std. Pkg. 1 • Standard Equipment: Wheel flanges and nut B106 = 5/8"-11 x 2" spindle (for flap wheels, wire brushes, etc.).Spindle is 23/4" long • Threads are 2" long • Air inlet: Both models 3/8" NPT.
77H30B10677H50B106
30005000
1.51.5
1711⁄161711⁄16
7.31 (3.32)7.31 (3.32)
Pro Series • Std. Pkg. 1 • Standard Equipment • 77A-8M825-7, back-up pad • P500-850, polishing bonnet (No. 7P24L only)P = 5/8"-11 spindle, 7" polishing bonnet • S = 5/8"-11 spindle, 7" back-up pad • Air Inlet: All models 1/4" NPT.
Std. Pkg. 1
7P24L7S30L7S48L7S60L
2400300048006000
.80
.80
.80
.80
63⁄863⁄863⁄863⁄8
3.75 (1.47)3.75 (1.47)3.75 (1.47)3.75 (1.47)
7S60L
No.Free Speed
RPMRated Power
HP
Side to CenterDistance at Spindle In.
Height Over End of Arbor In.
Pkg. Wt. Lb. (kg)
88S45W10988S60W107
45006000
1.82.0
21⁄821⁄8
66
7.13 (3.23)7.13 (3.23)
Vertical Sanders / Polishers / Buffers
Straight Sanders / Polishers / Buffers
IR
109
IR
110
IR
111
IR
112
No.Free Speed
RPMRated Power
HpHeight Over
End of Arbor In.Pkg. Wt. Lb. (kg)
Pro Series • Std. Pkg. 1 • Standard Equipment : Back-up pads, 77A-AM825-7, 7" Pad, 77A-AM825-9, 9" PadW107 = 5/8"-11 spindle, 7" back-up pad • W109 = 5/8"-11 Spindle, 7" back-up pad • Air inlet: Both models 1/2" NPT.
5" Sanding Pad Assembly / Medium
7" Sanding Pad Assembly / Medium
7" Sanding Pad Assembly / Firm
9" Sanding Pad Assembly / Firm
7" Wool Polishing Bonnet
Pad Nut
Pad Nut Wrench
Spindle Wrench
Sanding Pad / Adhesive Retained
Sanding Pad / Screw Retained
2" Abrasive Kit
3" Abrasive Kit
Inlet Hose Assembly 5/16" x 8"
Piped-Away Exhaust Kit
Controller Wrench
Series C No.Pkg. Wt. Lb. (kg)
Series 7 No.Pkg. Wt. Lb. (kg)
Series T & H No.Pkg. Wt. Lb. (kg)
Series 77A No.Pkg. Wt. Lb. (kg)
Series 88S No.Pkg. Wt. Lb. (kg)
––––––––––––––––––––
LG1-K21.2 (54)LG1-K31.5 (.68)RO-130.4 (1.8)
––––
77A-AM825-5.5 (2.23)
77A-AM825-7.6 (.27)
77A-BM825-7.6 (.27)
77A-AM825-9.7 (.32)
P500-850.4 (1.8)
D94SK-266.2 (.09)
– –
7S60-24818.8 (.36)
––––––––
RO-130.4 (1.8)
LG2-K284.5 (2.23)
– –
––
77A-AM825-7.6 (.27)
77A-BM825-7.6 (.27)
––
P500-850.4 (1.8)
D94SK-2662 (.09)
D94SK-266.8 (.36)
––––––––––––––––
77A-AM825-5.5 (2.23)
77A-AM825-7.6 (.27)
77A-BM825-7.6 (.27)
77A-AM825-97 (.32)
P500-850.4 (1.8)
D94SK-2662 (.09)
D94SK-266.8 (.36)
DG120-69.8 (.36)
––––––––––––––
77A-AM825-5.5 (2.23)
77A-AM825-7.6 (.27)
77A-BM825-7.6 (.27)
77A-AM825-97 (.32)
––
D94SK-2662 (.09)
D94SK-266.8 (.36)
DG120-69.8 (.36)
––––––––––
88V60-K184.5 (2.23)
88V60-950.8 (.36)
3195000
75/8 -11
61/4
4.5 (2.04)
3182800
75/8 -11
61/4
4.5 (2.04)
31718,000
5–
121/4
2.25 (1.02)
Heavy-Duty Air Vertical Sander 7" Pad
Heavy-Duty Air Vertical Polisher / Buffer 7" Pad
Heavy-Duty Air High SpeedSander 5" Pad
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS34
Series 61H No.
Pkg. Wt. Lb. (kg)
Series 77H No.Pkg. Wt. Lb. (kg
Series 88H No.Pkg. Wt. Lb. (kg)
G160HD-700-1/4
DG220-A290-G4DG120-700-G6
DG220-A290-G6DG10-69DG120-69
DG220-104-L6
.21 (.10)
.35 (.15)
.34 (.15)
.41 (.19).4 (.18).4 (.18).55 (.25)
7RAQT4-254.6 (.27)
7RAQT4-254.6 (.27)
77H-950.8 (36)
88V60-950.8 (36)
1/4" Erickson Collet1/4" Erickson Collet Assembly
3/8" Erickson Collet3/8" Erickson Collet Assembly
Collet Body WrenchCollet Nut Wrench
3/8"-24 Cone Wheel Spindle
Cone Wheel Spindle Wrench
Controller Wrench
IR
113
Accessories • Std. Pkg. 1
Straight Grinders
IR
114
IR
115
Air Finishing Tools
Std. Pkg. 1Super-Duty Air Orbital
Sander 32/3" x 9" Heavy-Duty Air Random
Orbital Sander 32/3" x 63/4" Pad
Heavy-Duty Air Dual Action Sander 6" Pad
No.Free Speed RPMPad Diameter In.
Pad TypeCFM
Air Inlet In.Pkg. Wt. Lb. (kg)
No.Free Speed RPMPad Diameter In.
Pad TypeCFM
Air Inlet In.Pkg. Wt. Lb. (kg)
3153000
23/4 x 171/2–8
1/46.25 (2.84)
3142500
75/8 -11
81/4
6.5 (2.95)
3135000
75/8 -11
81/4
6.5 (2.95)
Std. Pkg. 1
Heavy-Duty Air Twin Piston StraightLine Sander 23/4" x 171/2" Pad
Heavy-Duty Air AnglePolisher/Buffer 7" Pad
Heavy-Duty Air Angle Sander 7" Pad
No.Free Speed RPMPad Diameter In.
Spindle In.CFM
Air Inlet In.Pkg. Wt. Lb. (kg)
IR
116
Std. Pkg. 1Rear exhaust withpiped-away option. • Composite grip for
improved comfort • Locking lever with
tease throttle • Lightweight design
No.Free Speed RPM
Thread / Collet Size In.CFM
Air Inlet In.Pkg. Wt. Lb. (kg)
32722,00024 - 3/8
151/4
1.56 (.71)
34413,50024 - 3/8
91/4
3.70 (1.70)
Heavy-Duty Air High SpeedTire Buffer
Super-Duty 4" Air AngleGrinder
Check the Abrasives & Cutting Toolssection of this catalog for a great
selection of sanding papers and discs.
3598000
32/3 x 9Sponge rubber
61/4
3.5 (1.59)
3128000
32/3 x 63/4–6
1/44.5 (2.04)
31010,000
6–4
3/84.75 (2.15)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
35
1/4" Erickson Collet 3/8" Erickson Collet
3/8"-24 Cone Wheel Adapter
(3/8-24 Fx 3/8-24 Male)Wire Brush Adapter
(3/8-24 Fx 5/8-11 Male)
G160HD-700-1/4RO-A390-1/4*
DG120-700-G6–
LE2-104-L6–
LS2-A4-B10–
Series TX and HX No.Series 61H No.
Finishing Tools General Accessories
Collet Assembly
Std. Pkg. 1 IR
117
IR
119
No.Free Speed RPM
Blade Diameter In. (mm)CFM
Pkg. Wt. Lb. (kg)
S804000
81/4 (210)67
14.5 (6.6)
S1202050
12 (305)93
27.125 (12.4)
Saws
Circular Saws • Std. Pkg. 1 Standard Equipment:Model S80 • Grip handle with lock-off throttle • 81/4" (210 mm)Diameter combination chisel tooth blade • 5/8" (16 mm) Diameterround hub • Depth gauge bracket for adjusting depth of cutfrom 3/16" to 3" (5 mm to 76 mm) with 81/4" (210 mm) Diameterblade • Built-in Lubricator.Model S120 • Grip handle with lock-off throttle • 12" (305 mm)Diameter crosscut wood sawing blade; No. B12-257R pin-typeblade flange. • Depth gauge bracket for adjusting depth of cutfrom 13/8" to 43/8" (35 mm to 111 mm) with 12" (305 mm) bladeBuilt-in lubricator.
Equipment at Extra Price:Model S80 • Rip fence, No. 30478 • Metal carrying case No. S80-4. Model S120 • Abrasive blade flange kit No. S12-A86 • Depthgauge bracket for adjusting depth of cut from 0 to 43/8" (0 to 111 mm) with 12" (305 mm) blade, No. S12-506 • Metalcarrying case No. S12-4 • Blades for Use With Model S120 •(12" Diameter with 1" Diameter arbor hole) • B12-257R cross-cut, ripping, planer blade • B12-257W plastic, soft metals, leadpipe • B12-257Z insulating board. Air inlet 1/2" NPT.
No.Length of Stroke In. (mm)
Strokes Per MinuteCFM
Length Over Front Of Saw Guide In. (mm)Pkg. Wt. Lb. (kg)
SRA010A15/8 (16)160021
171/4 (438)8.125 (3.7)
Reciprocating Saw • Std. Pkg.1 • Built-in lubricator • Muffled exhaust Self-locking trigger • Blade Assortment Kit No. 205885 • Air Inlet 1/4"NPT. Performance figures are at 90 PSI (620 kPa) air pressure. I
R
118
SRA010K2 Kit • Std. Pkg. 1 Pkg. Wt. 2.8 Lb. (1.27 kg)• Includes: • No. SRA010A1 saw • Blade assortment of seven blades
for cutting a variety of materials (No. 205885: 5 each 6" blades 2 each 4" blades)
• Metal carrying case No. SRA010A1-4.
Needle Scalers
IR
120
Needle Scaler Kit • Std. Pkg. 1
182K1 Scaler KitNo.182L Scaler
Complete NS11A needle attachment (with 5" long needles); One extra set of NS11-22-19needles (5" long); One set of NS11-22-19 needles (7" long); One WF-14A-61/8 angle chisel;One WF-14B-61/8 straight chisel; One WF-14F-7 flat chisel; PKB-1 or vinyl carrying case.
6.8 (3.08)
No.Description
Pkg. Wt. Lb. (kg)
Std. Pkg. 1 • 1/4" NPT Inlet Standard Equipment: Lever throttle. Nineteen 1/8" (3 mm) Diameter steel needles, 5" (127 mm) Length. No. NS11-22-19 Features: Adjustable bayonet-type needle housing lock allows adjustment without special tools. Choice of three needle materialspermits custom selection for various surfaces. Rubber-faced throttle valve means positive sealing. Tested and approved in accordancewith MIL-S-23492A (Ships). Precision heat-treated needles for maximum performance.
IR
121
Series172182
ConfigurationL = LeverG = Grip
Retainer TypeN = Needleattachment
Nozzle TypeA1= Round
needle housing
172 L N A1
172LNA1182LNA1
No. Needle Housing Shape CFM Length In. (mm) Pkg. Wt. Lb. (kg)
172LNA1182LNA1
RoundRound
1213
133/4 (349)15 (381)
5.25 (2.38)5.75 (2.61)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS36
No.Description
Pkg. Wt. Lb. (kg)
IR
122
IR
123
IR
124
IR
125
IR
126
Needle Scaler AccessoriesNeedle Scaler Attachments • Std. Pkg. 1 • Available for use on Series 172 or 182 scalers already in service.
RoundNeedleHousing
NS11A5" (127 mm) Steel needles
.8 (.36)
NS11AS 5" (127 mm) Stainless steel
needles .8 (.36)
NS11A7 7" (178 mm)
Extended steel needles .9 (.41)
Rectangular Needle Housing
NS11B5" (127 mm) Steel needles
.8 (.36)
NS11BB 5" (127 mm)
Beryllium copper needles .8 (.36)
NS11BS 5" (127 mm) Stainless steel
needles .8 (.36)
NS11B77" (178 mm)
Extended steel needles .9 (.41)
No.Description
Pkg. Wt. Lb. (kg)
NS11-22-19 5" (127 mm) Steel needles
.4 (.18)
NS11-B22-195" (127 mm)
Beryllium copper needles .4 (.18)
NS11-S22-195" (217 mm) Stainless steel
needles.4 (.18)
NS11-122-197" (178 mm)
Extended steel needles.5 (.23)
Replacement Needles • Std. Pkg. Set of 19
No.Description
Pkg. Wt. Lb. (kg)
Std. Pkg. 1 • Standard Equipment: 23/4" (70 mm) Short steel piston (one for No. 161C1, three for No. 3161C1).
161C1One short steel
941/8 (105)6.5 (2.94)
3161C1Three short steel
154 (102)
9.38 (4.25)
No.Piston Description
CFMOperating Hght. In. (mm)
Pkg. Wt. Lb. (kg)
N16-5AShort steel 23/4"
(70 mm) standard.35 (.16)
316-5Short steel 25/8"
(67 mm) standard.35 (.16)
316-C5Short carbide-
tipped 25/8" (67 mm).35 (.16)
316-L5Long steel
35/8" (92 mm).35 (.16)
316-CL5Long carbide-
tipped 35/8" (92 mm).35 (.16)
For No. 161C1 One Required
For No. 3161C1Three Required
No.Description
Pkg. Wt. Lb. (kg)
Piston Scalers
Pistons for Nos. 161C1 and3161C1 Scalers
1/4" Stubby Standard-Duty
3/8" Stubby Standard-Duty
3/8" Super-DutyReactionless
1/2" Super-DutyReactionless
IR
127
IR
128
1/4" to 1/2" Air Ratchets
No.Drive In.
Standard Bolt Cap In.Max Torque Ft./Lb.
CFMAir Inlet In.
Pkg. Wt. Lb. (kg)
Std. Pkg. 1
1031/43/8202.51/4
1.13 (.51)
10333/83/8202.51/4
1.13 (.51)
1113/83/8504
1/42.56 (1.16)
11111/23/8504
1/42.56 (1.16)
3/8" – XPHeavy-Duty
1/2" – XPHeavy-Duty
3/8" – XPSuper-Duty
1/2" – XPSuper-Duty
No.Drive In.
Standard Bolt Cap In.Max Torque Ft./Lb.
CFMAir Inlet In.
Pkg. Wt. Lb. (kg)
Std. Pkg. 1
107XP3/83/8504
1/42.49 (1.13)
1077XP1/23/8504
1/42.49 (1.13)
109XP3/83/8704
1/43.10 (1.40)
1099XP1/23/8704
1/43.10 (1.40)
The XP markidentifies tools upgraded withenhanced features to deliver ExtraPerformance.
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
37
IR
129
About Impactools
Super-Duty Tools: Intended for high vol-ume production or heavy maintenanceand construction, where ultimate per-formance and durability are required.
Heavy-Duty Tools: Well-suited to medium volume production or generalmaintenance and construction tasks.
Standard-Duty Tools: Are intended for less frequent use, involving lightermaterials.
Three Types of Impactool Mechanisms
Three Different Rankings Help to Define the Ingersoll Rand Line of Impactools.
Ball and CamPrecision mechanism converts motor torque into powerful rotary impacts. a planetary gear drive deliverssmooth, constant speed from the motor. The ball and cam mechanism is ideal for soft draw applications,and is utilized in larger Impactools, as well as in all torque control and electric impactools • Air or electric • Does not stall • A time-tested design.
Jumbo HammerSimilar in concept to the twin hammer mechanism but employing a single hammer. Simplified design • Reversible hammers • Direct Drive.
Twin HammerA simplified, yet highly effective design that holds each of the reversible hammers in full engagement ordisengagement with centrifugal force. The twin hammer mechanism delivers more power per pound, andis less sensitive to air pressure fluctuations than any other design • Smooth, balanced blow • Highpower-to-weight ratio • Suitable for hard or soft-draw applications.
Standard-Duty • Std. Pkg. 1• High output twin hammer mechanism on Model 2131.• Twin hammer impact mechanism with pressure feed lubrication on Models 2705A1 and 231.• Jumbo hammer impact mechanism with pressure feed lubrication on Series 1701.• Oil bath mechanism on Model 223.
21123/8" Square
Pistol260 (354)
1/4 (6.4)2.65 (1.20)
231C1/2" Square
Pistol400 (542)
1/4 (6.4)5.63 (2.55)
2705P11/2" Square
Pistol400 (542)
1/4 (6.4)5.63 (2.55)
2131P1/2" Square
Pistol450 (610)
1/4 (6.4)4.5 (2.04)
2141P3/4" Square
Pistol1000 (1492)
3/8 (10)7.0 (3.2)
1720P31" Square
Pistol1100 (1490)
3/8 (10)11.88 (5.39)
2801" SquareGrip IT
1600 (2176)1/2 (12.7)
11.88 (5.39)
IR
130
3/8" to 1" Drive Impactools
3/8", 1/2" & Quick Change Drive ImpactoolsHeavy-Duty • Std. Pkg. 1 • Features twin hammer impact mechanism on Series 2707. Jumbo hammer impact mechanism on Series1702. Pressure feed lubrication system.
1702SB13/8" Square
Straight105 (142)
1/4 (6.4)2.5 (1.12)
1702P13/8" Square
Pistol125 (170)
1/4 (6.4)2.75 (1.25)
1702P41/4" Hex QC
Pistol85 (115)1/4 (6.4)
2.75 (1.25)
No.Drive Description
HandleMax. Torque Ft./Lb. (Nm.)
Size NPT Inlet In. (mm)Pkg. Wt. Lb. (kg)
IR
131
No.Drive Description
HandleMax. Torque Ft./Lb. (Nm.)
Size NPT Inlet In. (mm)Pkg. Wt. Lb. (kg)
IR
132
1720P13/4" Square
Pistol1000 (1360)
3/8 (10)11.88 (5.39)
1720B13/4" Square
Grip1000 (1360)
3/8 (10)13.19 (6.27)
2161P3/4" Square
Pistol1250 (1700)
3/8 (10)11.25 (5.10)
1712B21" Square
Grip1350 (1836)
1/2 (13)18.25 (8.28)
1712P21" Square
Pistol1350 (1836)
1/2 (13)19.75 (8.96)
2171P1" Square
Pistol1250 (1700)
1/2 (13)8.50 (3.86)
3/4" to 1" Drive ImpactoolsHeavy-Duty • Std. Pkg. 1 • Features jumbo hammer impactmechanism for efficient operation. Pressure feed impact
mechanism lubrication. Excellent power-to-weight ratio.
No.Drive Description
HandleMax. Torque Ft./Lb. (Nm.)
Size NPT Inlet. In. (mm)Pkg. Wt. Lb. (kg)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS38
Super-Duty • Std. Pkg. 1 • Series 2908: Durable epoxy-coated motor housing and handle; chrome-plated steel hammer case; twin hammer impact mechanism; pressure feed impact mechanism lubrication. Series 2920: Muffled exhaust reduces operator fatigue; slip fit motor for easy maintenance; tilt throttle on pistol models for maximum control; two piece motor housing on pistol models; durable epoxy-coated motor housing and handle; chrome-plated steel hammer case; twin hammer impact mechanism; pressure feed impact mechanism lubrication • Performance figures are at 90 PSI (620 kPa) air pressure.
3/8", 1/2" and Quick Change Drive ImpactoolsSuper-Duty • Std. Pkg. 1 • Features jumbo hammer impact mechanism on Series 2902 and 2903. Rugged twin hammer impactmechanism on 2906 • Durable epoxy-coated motor housing and handle • Chrome plated steel hammer case • Pressure feed impactmechanism lubrication • All of the square drive Impactools are furnished with the pin-type retainer • Performance figures are at 90 PSI (620 kPa) air pressure.
No.Drive Description
HandleMax. Torque Ft./Lb. (Nm.)
Size NPT Inlet In. (mm)Pkg. Wt. Lb. (kg)
No.Drive Description In.
HandleMax. Torque Ft./Lb. (Nm.)
Size NPT Inlet In. (mm)Pkg. Wt. Lb. (kg)
2902P13/8"
SquarePistol
140 (190)1/4 (6.4)
2.5 (1.25)
2904P13/8"
SquarePistol
230 (313)1/4 (6.4)
2.65 (1.20)
2904P41/4" Hex
QCPistol
260 (354)1/4 (6.4)
2.75 (1.25)
2903P11/2
SquarePistol
220 (298)1/4 (6.4)
.81 (2.18)
2903P23/8
SquarePistol
205 (278)1/4 (6.4)
.81 (2.18)
2906P11/2
SquarePistol
500 (678)1/4 (6.4)6 (2.72)
2908P15/8" Square
Pistol750 (1017)
3/8 (10)8.5 (3.86)
2908P23/4" Square
Pistol750 (1017)
3/8 (10)8.69 (3.94)
2920B13/4" Square
Grip1100 (1495)
3/8 (10)13.19 (5.98)
2920B31" Square
Grip1100 (1495)
3/8 (10)13.19 (5.98)
2920B93/4" Sq. at 90°
Grip700 (949)
3/8 (10)23.69 (10.8)
2925P13/4" Square
Pistol1450 (1972)
3/8 (10)11.88 (5.39)
5/8" to 1" Drive Impactools
1734A1 Grip outside triggerNo. 5 spline 11/4 11/8 1 1/2 (19) 18.38 (8.34)
No. 5 Spline ImpactoolExtra Heavy-Duty • Std. Pkg. 1 • The Model 1734A1 "Rattler" Impactool is designed specifically forthe steel erection and construction markets. This extra heavy-duty Impactool is loaded with featuresthat will benefit every steel erector. Performance figures are at 90 PSI (620 kPa) air pressure.
No. Mild Steel A325 A490HandleDrive
Description
Rated Capacity,Bolt Diameter, In. Size NPT Inlet
In. (mm)
Pkg. Wt,Less Socket
Lb. (kg)
IR
133
IR
134
IR
135
IR
136
IR
137
1" Drive ImpactoolsSuper Duty • Std. Pkg. 1 • 1" square drive or No. 5 splinemodels. Chrome-plated steel hammer case and durable epoxy-coated motor housing and handle. Twin hammers meanmore power per pound. Pressure feed impact mechanism lubrication. Two piece motor housing • * No. 5 spline 15/8"OD 14 teeth • OT = Outside Trigger • IT = Inside Trigger.
2934A21" SquareGrip OT
1500 (2030)1/2 (13)
18.5 (8.39)
2934B21" SquareGrip IT
1500 (2030)1/2 (13)
18.5 (8.39)
2934B1*No. 5 Spline
Grip IT1500 (2030)
1/2 (13)18.5 (8.39)
2934B91" Sq. at 90°
Grip IT1200 (1624)
1/2 (13)35.75 (16.2)
2934P21" Square
Pistol1500 (2030)
1/2 (13)20 (9.07)
No.Drive Description
HandleMax. Torque Ft./Lb. (Nm)
Size NPT Inlet In. (mm)Pkg. Wt. Lb. (kg)
2925P31" Square
Pistol1450 (1972)
3/8 (10)11.88 (5.39)
*2925RBP13/4" Square
Pistol1600R / 1300F
(2176R / 1768F))3/8 (10)
11.88 (5.39)
2925B21" Square
Grip1600 (2170)
1/2 (19)13.19 (5.98)
*2925RB21" Square
Grip1700R / 1500F(2305R / 2034F)
1/2 (19)14.0 (6.35)
No.Drive Description
HandleMax. Torque Ft./Lb. (Nm.)
Size NPT Inlet In. (mm)Pkg. Wt. Lb. (kg)
*RB Models are reverse bias toprovide extra power whenremoving fasteners.
No.Drive Description
HandleMax. Torque Ft./Lb. (Nm.)
Size NPT Inlet In. (mm)Pkg. Wt. Lb. (kg)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
39
IR
138
IR
139
IR
140
2940A21" SquareGrip OT
2000 (2710)1/2 (13)
22 (9.98)
2940B21" SquareGrip IT
2000 (2710)1/2 (13)
22 (9.98)
2940A1No. 5 spline
Grip OT2000 (2710)
1/2 (13)22 (9.98)
2940B1*No. 5 spline
Grip IT2000 (2710)
1/2 (13)22 (9.98)
2940P21" Square
Pistol2000 (2710)
1/2 (13)22.88 (10.4)
No.Drive Description
HandleMax. Torque Ft./Lb. (Nm.)
Size NPT Inlet In. (mm)Pkg. Wt. Lb. (kg)
Super-Duty • Std. Pkg. 1 • 1" square drive or No. 5 spline. Chrome-plated cast iron hammer case and durable epoxy-coated motorhousing and handle. Twin hammers mean more power per pound • Twopiece motor housing • * No. 5 spline 15/8" OD 14 teeth OT = Outside Trigger • IT = Inside Trigger.
11/2" Drive ImpactoolsSuper-Duty • Series 2945 and 2950 • Std. Pkg. 111/2" square drive or No. 5 spline • Twin hammers mean more power per pound. Direct drive for fast rundown • Durable epoxy-coated motor housing • Chrome-plated steel hammer case • Pressure feed impact mechanism lubrication • Two piece motor housing Model 5980A1: Precision ball and cam impact mechanism.
2945A711/2" Square
Grip OT2400 (3265)
1/2 (13)30 (13.6)
2945B711/2" Square
Grip IT3400 (4626)
1/2 (13)30 (13.6)
2945B1*No. 5 spline
Grip IT2400 (3265)
1/2 (13)30 (13.6)
2950A711/2" Square
Grip OT3000 (4082)
1/2 (13)32.63 (14.8)
2950B1*No. 5 spline
Grip IT3000 (4082)
1/2 (13)32.63 (14.8)
2950B711/2" Square
Grip IT3000 (4082)
1/2 (13)32.63 (14.8)
5980A111/2" Square
Lever10,000 (13,605)
3/4 (19)88 (39.9)
No.Drive Description
HandleMax. Torque Ft./Lb. (Nm.)
Size NPT Inlet In. (mm)Pkg. Wt. Lb. (kg)
21/2" to 31/2" Drive ImpactoolsSuper-Duty • Std. Pkg. 1Faster removal and tightening of large – 4" (102 mm) and larger – fasteners. Precision ball and cam impact mechanism. Portable,easy to handle or suspend • Model 599A1 is the most powerful impact tool in the world.
5982A121/2" Square
Lever20,000 (27,120)
3/4 (19)120 (54.43)
588A121/2" Square
Lever50,000 (67,800)
1 (25)215 (97.52)
599A131/2" Square
Lever80,000 (108,500)
11/4 (31.75)599 (271.71)
No.Drive Description
HandleMax. Torque Ft./Lb. (Nm.)
Size NPT Inlet In. (mm)Pkg. Wt. Lb. (kg)
1" Drive Impactools (continued)
IR
141
Air Impactools
Std. Pkg. 1
3/8" Super-Duty
3/8" Super-Duty
3/4" Super-Duty
3" Extd. Anvil 3/4"
Super-Duty
3/4" Super-Duty
6" Extd. Anvil
No.Drive In.
Std. Bolt Cap In.Max Torque Ft./Lb.
CFMAir Inlet In.
Pkg. Wt. Lb. (kg)
2113/87/161502.51/4
2.5 (1.13)
2123/87/161802.51/4
2.75 (1.25)
261-33/41
11009.53/8
11.55 (5.24)
2613/41
11009.53/8
11.06 (5.02)
261-63/41
11009.53/8
12.25 (5.56)
2940P2
5980A1
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS40
IR
142
IR
143
Std. Pkg. 1
No.Drive In.
Standard Bolt Cap In.Max Torque Ft./Lb.
CFMAir Inlet In.
Pkg. Wt. Lb. (kg)
Std. Pkg. 1No.
Drive In.Standard Bolt Cap In.
Max Torque Ft./Lb.CFM
Air Inlet In.Pkg. Wt. Lb. (kg)
2801
11/41600101/2
18.25 (8.28)
280-61
11/41600101/2
21.5 (9.75)
2901
11/41600101/2
19.75 (8.96)
Air Impactools (continued)
1" Super-Duty1" Super-Duty
6" Extended Anvil 1" Super-Duty
#5 Spline Super-Duty 1" Super-Duty290-S
#5 Spline11/41600101/2
19.75 (8.96)
2931
13/82000121/2
22.88 (10.38)
Check the Abrasives & Cutting Toolssection of this catalog for agreat selection of drill bits.
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
41
IR
144
IR
145
No.Drive Description
HandleMax. Torque Ft./Lb. (Nm.)
VoltsPkg. Wt. Lb. (kg)
Super-Duty Electric Impactools
Heavy & Standard-Duty Electric Impactools
Std. Pkg. 1Model 8005 Standard - Duty ImpactoolSleeve bearing construction. Heat treated steel gears. Lightweight cast aluminum housing. Double insulated –no grounding required.
80053/8" Square
Pistol85 (115)120 AC
4.5 (2.04)
No.Drive Description
HandleMax. Torque Ft. / Lb. (Nm.)
VoltsWt. Less Socket Lb. (kg)
80531/2" Square
Pistol330 (448)
120 AC/DC7 (3.18)
80553/4" Square
Pistol450 (610)
120 AC/DC10 (4.54)
80625/8" Hex QC
Pistol400 (542)
120 AC/DC10 (4.54)
80561" Square
Grip750 (1017)120 AC/DC32.5 (14.74)
Std. Pkg. 1 • Full ball bearing construction throughout for maximum performance. High quality, heattreated steel gears for longer life. Full power in reverse for removing bolts, nuts, studs and lag screws.Lightweight cast aluminum housing and handle reduce operator fatigue. Heavy-duty 3-conductor cord –grounding required. Delivers high torque for maximum efficiency. Tools comply with OSHArequirements and are UL listed.
Comfort Grips
Comfort Grips • Std. Pkg. 1 • Pkg. Wt. .04 Lb. (.02 kg) • Made from energy-absorbing Sorbothane®, theIRAX Comfort Grip provides an isolation barrier between your operator and the tool. Sorbothane®, provedeffective in absorbing mechanical shocks and reducing vibrations transmitted to the operator, has beentested and recommended for years in medical and athletic applications. Sorbothane's® excellent energyabsorption and vibration dampening properties make the Comfort Grip ideal for use when the operator is subjected to repeated mechanical shocks or vibration.
IR
146
* Kit for tool only. Use CG-6x8 sheet stock to cover auxiliaryhandles and percussive barrels.CG-6X8 6" x 8" Sheet with tape
CG-88VCG-99V
88V-88S (Both handles)99V (Both handles)
CG-3RLCG-6WRTCG-6WTCG-7RLD
Series 3 reversible stallSeries 6 reversible shut-off
Series 6 nonreversible shut-offSeries 7 reversible
Vertical Grinders and Sanders Angle Wrenches
CG-AV10ACG-W1ACG-72
AVC10, 12, 13 and 26A1 (offset)1, 2, 3, 4, W1, W2, W3, W4
772
CG-6ACG-728CG-7A
Series 6 pistolSeries 728 pistolSeries 7 pistol
Percussive Tools* Drills*
CG-1702PCG-1720PCG-2705CG-2707CG-2906CG-2920P
CG-2934BA
1702P Pistol1720P Pistol
231, 2705A Pistol2707A Pistol2906P Pistol2920P Pistol
1712, 2934, 2940, 2945, 2950 Inside trigger handles
CG-3RLCG-3RPCG-3RTCG-4RLCG-4RTCG-5RACG-5RLCG-7RACG-7RL
Series 3 straight leverSeries 3 straight push-to-start
Series 3 pistol & tapperSeries 4 straight lever
Series 4 pistolSeries 5 pistol
Series 5 straight leverSeries 7 pistol & tapperSeries 7 straight lever
Impactools* Screwdrivers and Tappers*
For Other Applications
No. Tool Series No. Tool Series
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS42Air MotorsAir Motor Selection & CharacteristicsIngersoll-Rand Offers Two Basic Types of Air Motors:Vane MotorsAre smaller, lighter and less expensive than piston motors of similar power. Simple in design and construction, they can beoperated in most any position. Vane motors are available in abroad range of speeds, torques and power and are the mostwidely used type of air motor.
Radial Piston MotorsOperate at lower speeds than vane motors. Have excellent starting and speed control. Especially good for "lugging" heavyloads at slow speed. Standard operational position is horizontal.
Reversible / Non-Reversible Air MotorsNon-reversible air motors are rated at slightly higher speeds,torques, and horsepower than reversible motors of the same family.
Air PressureWhen selecting air motors, remember that the specification listings show only one set of performance figures, at a particularpressure – 90 PSIG. Air motors are designed to produce optimum performance at this pressure.
Maximum PowerUngoverned air motors develop maximum horsepower atapproximately 50% of free (unloaded) speed while governedmotors reach their peak horsepower at about 80% of free speed.
Desired Operating SpeedThe desired operating speed, not the free and unloaded speedshould be considered when selecting air motors. Ungoverned airmotors should not be run unloaded.
Required TorqueEqually important as the speed at which an air motor is to be runis the required torque. The combination of the two factors –speed and torque – determine the power of the desired motor.
Speed and TorqueStarting torques are approximately 75% of stall torques.Operating or running torques at any speed can be approximatedfrom motor performance curves – or calculated using the formula:
Horsepower x 5250Torque (Lb./Ft.) = ____________________________Speed (revolutions per minute)
Kilowatts x 9550Torque (MN) = ____________________________Speed (revolutions per minute)
Air System and SupplyOnce an air motor has been selected, it is important to insurethat the desired air pressure is available at the motor, while themotor is operating.
Air Motor • 9.4 HP Flange Mount Radial Piston • Std. Pkg. 1Used on the popular FA2 Air Winch and Hercu-Link Air ChainHoists. It has a female spline shaft end, and five bolt holes fordirect mounting.
The air motor has infinite variable speeds, develops maximumtorque at low RPM and can be stalled-started-stopped andreversed without damage. It's ideally suited for the petroleum,decoking, and material handling industries.
Features• 9.4 HP at 1200 RPM and 50 Ft./Lb. of torque.• 76 Ft./Lb. stall torque.• Efficient five cylinder radial design.• Sealed oil bath lubrication minimizes wear.• Motor mounted throttle or remote mounted controls.• Variable speed, with excellent low speed torque.• Easy installation.
Applications• Direct replacement
motor for the JOYAMP94 (PA8).
• Material processing and handling equipment.
• Crane, hoist, or winch motor.
• Conveyors.• Pump drives.• Decoking drill stem motor. Horizontal mount only.
Air SupplyApproximately 270 SCFM (7.7 Cu. m/min.) at 90 PSIG (6 Bar)will be required for continuous operation at maximum horsepower.
Accessories
No.Pkg. Wt. Lb. (kg)
5025948 (21.77)
No.Description
Size In.Pkg. Wt. Lb. (kg)
52465Muffler
11/41.8 (.82)
F42-0A-000Filter11/4
19.4 (8.80)
L40-0A-000Lubricator
11/419.6 (8.89)
IRM
001
IRM
002
IRM
003
Air Motor Selection and CharacteristicsMany other speeds, torques and power can be obtained from thesame motor by regulating the pressure, air supply or exhaust.While they will operate at pressures below 40 PSIG, their performance may not be consistent. They can also be operatedabove 100 PSIG, but often at the expense of increased maintenance.
A good rule to follow is to size an air motor based on approximately 70% of the lowest available air pressure. This willallow additional power for starting and possible overloading.
A pressure reading at the compressor does not mean that thesame pressure will be available to an operating air motor,because of possible restrictions and friction losses in the air system. Exhaust restrictions can also affect air motor operation,and are often the cause of performance problems.
Inlet Controls When installing reversible air motors, a four-way valve or twothree-way valves should be used to prevent blockage of the secondary exhaust port. This is the opposite rotation port to thatwhich is being pressurized.
Replacing Electric Motors with Air MotorsElectric motors, with the exception of series wound direct currentmotors, have entirely different performance characteristics thanair motors. Therefore, their torque and speed curves will notmatch. Many electric motors are oversized to allow for overload-ing and lower power air motors can be used as replacements.
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
43
Series M004 Multi-Vane Air Motors • Std. Pkg. 1Round keyed shaft • Square shaft (optional) • Threaded shaft (optional) .31 to .50 HP • Geared drive • Flange mounted • s All models mustbe operated with sufficient load to prevent speed from exceeding maximum allowable speedshown on performance curve.
* Applications with these models must be limited to 33 Lb./Ft. (44.7 Nm) torque. • Performance figures are at 90 PSIG (620 kPa) air pressure.
No.
M004RHR000AR3M004RHR004AR3M004RHR006AR3M004RHR011AR3M004RHR015AR3M004RHR023AR3M004RHR033AR3M004RHR050AR3M004RHR083AR3M004RHR167AR3
ReversibleM004RVR000AR3M004RVR004AR3M004RVR006AR3M004RVR011AR3M004RVR015AR3M004RVR023AR3M004RVR033AR3M004RVR050AR3M004RVR083AR3M004RVR167AR3
M 004 RV R 023 A R3
Motor HP Rotation Air inlet &exhaust
Gear ratio Flange Shaft
HP = Approximate HP range (.31 to .50)
Rotation = RV reversible, RH non-reversible, right hand fromrear of motor (CCW facing shaft), LH non-reversible, left handfrom rear of motor (CW facing shaft).
Air Inlet & Exhaust = R Rear, S Side (side inlet and exhaustavailable on reversible models only).
Gear Ratio = 023 is 1 to 23, 033 is 1 to 33, etc.
Flange = A 2 hole flange, B 4 hole face mounting.
Shaft = R3 3/8" round keyed • T3 3/8"-24 UNF-2A threaded.Threaded shaft extension is .512" (13 mm). Full thread length is.424" (10.75 mm) • S3 3/8" square drive. Square shaft extensionis 1.791" (45.5 mm).
Non-Reversible • Direction of rotation is counterclockwise when facing the shaft.
HP KW
Speed @Max.PowerRPM
FreeSpeed
sRPM Lb./Ft. NM Lb./Ft. NM SCFM m 3/m
Pkg. Wt.Lb. (kg)
0.500.470.470.440.440.440.440.410.410.41
0.370.350.350.330.330.330.330.310.310.31
10,0002470149082561039528017510653
18,000445026801490109571550531519095
0.401.462.423.925.328.1011.5*16.5*27.5*55.0
0.541.983.285.327.2111.015.6*22.4*37.3*74.5
0.531.943.225.227.1010.815.4*22.1*36.7*73.3
0.722.634.377.089.6314.620.8*30.0*49.7*99.4
20.019.519.519.019.019.019.018.518.518.5
0.570.550.550.540.540.540.540.520.520.52
2.06 (0.93)2.19 (1.00)2.19 (1.00)2.38 (1.08)2.38 (1.08)2.38 (1.08)2.38 (1.08)2.69 (1.22)2.69 (1.22)2.69 (1.22)
2.06 (0.93)2.19 (1.00)2.19 (1.00)2.38 (1.08)2.38 (1.08)2.38 (1.08)2.38 (1.08)2.69 (1.22)2.69 (1.22)2.69 (1.22)
0.400.370.370.340.340.340.340.310.310.31
0.300.280.280.250.250.250.250.230.230.23
8000197511906604853152251408442
16,00039552380132597563545028016985
0.321.131.883.004.076.238.85*12.3*20.6*41.3
0.431.532.554.075.528.4512.0*16.7*27.9*56.0
0.421.512.514.005.438.3011.8*16.5*27.5*55.0
0.572.053.405.427.3611.216.0*22.4*37.3*74.5
19.018.518.518.018.018.018.017.517.517.5
0.540.520.520.510.510.510.510.500.500.50
IRM
004
Air Motors (continued)
Max. PowerStarting Torque
StallTorque
Air Consumption@ Max. Power
Furnished with Cataloged Models
2 Hole flange mounting3/8" Round keyed shaft
Optional at No Extra Price
4 Hole face mounting3/8"-24 Threaded shaft
Side inlet and exhaust housing (for reversible models only)
Optional at Extra Price
R1440-212-1 3/8" Square drive adapter.1" long with 3/8"-24" female threads foruse with threaded shaft. Required for 3/8" adapter (2) R2J-561 set screws)
Equipment Options
Series M004 Model Number Symbolization
IRM
005
IRM
006
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS44
IRM
007
Series 1801 & 1841 Multi-Vane Air Motors •Std. Pkg. 1 • Round keyed shaft • Square shaft(optional) • 1.1 to 1.4 HP • Geared drive • Flange mounted • s All models must be operatedwith sufficient load to prevent speed from exceeding maximum allowable speed shown onperformance curve • Performance figures are at 90 PSIG (620 kPa) air pressure.
Non-Reversible • Direction of rotation is counterclockwise when facing the shaft.
1841N1841P1841Q1841U1841W
1.21.11.11.11.1
.89
.82
.82
.82
.82
800430260175150
1700900550380320
9.315273745
12.620.336.650.261
12.520365060
1727.148.867.881.4
4343434343
1.221.221.221.221.22
1801N1801P1801Q1801U1801W
1.41.351.351.351.35
1.041.011.011.011.01
918500300205175
19901050650435370
10.517.2304152
14.223.340.755.670.5
1423405570
1931.254.274.694.9
4646464646
1.31.31.31.31.3
Series 3800 & 3840 Multi-Vane Air Motors •Std. Pkg. 1 • Round keyed shaft • Square shaft (optional) • 1.35 to 1.55 HP • Geared drive • Flange mounted • s All models must be operated with sufficient load to prevent speed from exceeding maximum allowable speedshown on performance curve • Performance figures are at 90 PSIG (620 kPa) air pressure.
Series 4800 & 4840 Multi-Vane Air Motors •Std. Pkg. 1 • Round keyed shaft • Square shaft (optional) • .3 to 3.7 HP • Geared drive • Flange mounted • s All models must be operatedwith sufficient load to prevent speed from exceeding maximum allowable speed shown onperformance curve • Performance figures are at 90 PSIG (620 kPa) air pressure.
Non-Reversible • Direction of rotation is counterclockwise when facing the shaft.
3840M3840P3840Q3840S3840U
1.401.351.351.351.35
1.041.011.011.011.01
39021513010083
825440280190162
23406086100
31.254.281.4116135
31.553.580115134
42.772.6108156181
4444444444
1.251.251.251.251.25
Reversible
4800M4800P4800Q4800S4800U
3.73.53.5 3.5 3.5
1.761.611.611.611.61
56026019514597
1050510375275185
5198129178265
69.2133175241359
69131173238354
93.6178235323480
9595959595
2.692.69 2.69 2.69 2.69
4840M4840P4840Q4840S4840U
3.233 3 3
2.392.242.24 2.24 2.24
48522816712583
975475350255170
4893123161225
65126167218305
65125165215300
88.1170224292407
9595959595
2.692.69 2.69 2.69 2.69
Non-Reversible • Direction of rotation is counterclockwise when facing the shaft.
Reversible
3800M3800P3800Q3800S3800U
1.551.451.451.451.45
1.161.081.081.081.08
520285180120105
1100600375255220
24426288105
32.55784119142
3356.583.5118140
44.876.6113160189
4848484848
1.361.361.361.361.36
15.38 (6.97)20.13 (9.13) 20.13 (9.13)20.13 (9.13)20.13 (9.13)
15.25 (6.92)19.75 (8.96) 19.75 (8.96) 19.75 (8.96) 19.75 (8.96)
7.38 (3.35)8.75 (3.97)8.75 (3.97)8.75 (3.97)8.75 (3.97)
7.13 (3.23)8.50 (3.86)8.50 (0.25)8.50 (0.25)8.50 (0.25)
5.50 (2.5)5.88 (2.67)5.88 (2.67)5.88 (2.67)5.88 (2.67)
5.3 (2.4)5.75(2.61)5.75(2.61)5.75 (2.61) 5.75 (2.61)
Reversible
Air Motors (continued)
No. HP KW
Speed @Max.PowerRPM
FreeSpeed s
RPM Lb./Ft. NM Lb./Ft. NM SCFM m 3/mPkg. Wt.Lb. (kg)
Max. PowerStarting Torque
StallTorque
Air Consumption@ Max. Power
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
45
IRM
008
IRM
009
IRM
010
Series 17RA, 17RB, 34RA, and 34RB Multi-Vane Air Motors •Std. Pkg. 1 • Reversible Round keyed shaft • 2.2 to 4.1 HP • Geared drive • Flange or base mounted • s All models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 90 PSIG (620 kPa) air pressure.
Series 48RA, 48RB Multi-Vane Air Motors •Std. Pkg. 1 Round keyed shaft • 3 to 3.1 HP • Geared drive • Flange or base mounted • s All models must be operatedwith sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve.Performance figures are at 90 PSIG (620 kPa) air pressure.
Series 92RA, 92RB Multi-Vane Air Motors • Std. Pkg. 1 Round keyed shaft • 7.9 to 8.15 HP • Geared drive • Flange or base mounted • s All models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve • Performance figures are at 90 PSIG (620 kPa) air pressure.
17RA00517RA00817RA01117RA01417RA01717RA02217RA02917RA03617RA04517RA07834RA00534RA00834RA01134RA01434RA01734RA02234RA02934RA03634RA04534RA078
2.32.3 2.3 2.3 2.3 2.32.2 2.2 2.2 2.24.14.1 4.1 4.1 4.14.14 4 4 4
1.721.721.721.721.721.721.641.641.641.643.063.06 3.06 3.06 3.06 3.062.98 2.98 2.98 2.98
5623832542011691299779623656038525520116812899806336
111076050540033525518715212169
108074049039032524518715212169
2435526780105120148187327416598124148195224277348606
32.547.571.9911091421632012544436088133168201264304376472822
3754.582104124163201248312545691011521922293013744625811010
50.273.911114116822127333642373993.61372062603114085076277881370
103103103103103103100100100100183183183183183183180180180180
2.922.92 2.92 2.92 2.92 2.922.83 2.83 2.83 2.835.185.18 5.18 5.18 5.185.185.18 5.18 5.18 5.18
40 (18.1)40 (18.1)40 (18.1)40 (18.1)40 (18.1)40 (18.1)72 (32.7)72 (32.7)72 (32.7)72 (32.7)43 (19.5)43 (19.5)43 (19.5)43 (19.5)43 (19.5)43 (19.5)75 (34)75 (34)75 (34)75 (34)
48RA00548RA00848RA01148RA01448RA01748RA02248RA02948RA03648RA04548RA078
3.13.1 3.1 3.1 3.1 3.133 3 3
2.312.31 2.31 2.31 2.31 2.312.242.24 2.24 2.24
93063842333227821316213110560
16901160772612511390292236188108
2638577286113135167209364
35.351.577.397.6117153183227283494
3551.577.598117154189234295513
47.569.8105133159209256317400696
95959595959590909090
2.692.69 2.69 2.69 2.69 2.692.55 2.55 2.55 2.55
44 (20)44 (20)44 (20)44 (20)44 (20)44 (20)75 (34)75 (34)75 (34)75 (34)
92RA00592RA00892RA01192RA01492RA01792RA02292RA02992RA03692RA04592RA078
8.158.15 8.15 8.15 8.15 8.157.9 7.9 7.9 7.9
6.086.08 6.08 6.08 6.08 6.085.89 5.89 5.89 5.89
91062041532727420916013010359
13901296852682571435327264210120
5680120152180235280345440770
75.91091632062443193804685971044
75109
164.52082483264024976261090
1021482232823364425456744891478
230230 230 230 230 230225 225 225 225
6.516.51 6.51 6.51 6.51 6.516.37 6.37 6.37 6.37
46 (20.9)46 (20.9)46 (20.9)46 (20.9)46 (20.9)46 (20.9)78 (35.4)78 (35.4)78 (35.4)78 (35.4)
Air Motors (continued)
No. HP KW
Speed @Max.PowerRPM
FreeSpeed s
RPM Lb./Ft. NM Lb./Ft. NM SCFM m 3/mPkg. Wt.Lb. (kg)
Max. PowerStarting Torque
StallTorque
Air Consumption@ Max. Power
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS46
IRM
011
IRM
012
IRM
013
Series 22N51-W/RC Multi-Vane Air Motors •Std. Pkg. 1 • Reversible Round keyed shaft • 1.75 HP • Geared drive, governed • Base mounted • Performance figures are at 90 PSIG (620 kPa) air pressure.
Series 551 Multi-Vane Air Motors •Std. Pkg. 1 • ReversibleRound keyed shaft • 5.6 HP • Geared drive, governed base mounted • s All models must be operated withsufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve.Performance figures are at 90 PSIG (620 kPa) air pressure.
Series 92RM and 992RM Multi-Vane Air Motors • Std. Pkg. 1 Round keyed shaft • 8.15 to 9.9 HP • Geared drive • Face mounted • s All models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve • Performance figures are at 90 PSIG (620 kPa) air pressure • Direction of rotation of No. 92RM1 is clockwise No. 92 RM2 is counterclockwise when facing the shaft end of the motor.
22N51-W/RC 1.75 1.31 208 280 49 66.4 66 89.5 55 1.6
551SM51-W/RC551S051-W/RC
5.65.6
4.184.18
9559
12077
400650
542881
545885
7391200
160160
4.534.53
Non-Reversible
Reversible
9.99.9
7.387.38
20952095
39803980
3333
44.744.7
4545
6161
240240
6.796.79
992RM1 8.15 6.08 1730 3600 28.7 38.9 39 52.9 230 6.51
Series MVA and Movo Multi-Vane Air Motors • Std. Pkg. 1 • ReversibleRound keyed shaft • .75 to 10.5 HP • Direct drive flange or base mounted • s All models must be operatedwith sufficient load to prevent speed from exceeding maximum allowable speed shown on performancecurve. Performance figures are at 90 PSIG (620 kPa) air pressure.
MVA017AMVA017BMVA034AMVA034B
1.931.934.154.15
1.441.443.093.09
2800280030003000
5450545062506250
4.54.58.38.3
6.16.111.311.3
77
12.812.8
9.59.517.417.4
7676181181
2.152.155.125.12
92RM192RM2
12.5 (5.67)12.5 (5.67)16.5 (7.48)16.5 (7.48)
25.25 (11.3)
24.25 (11.3)24.25 (11.3)
93 (42.2)93 (42.2)
21 (9.5)
IRM
014
Series MVA and MVO Multi-Vane Piston Air Motors •Std. Pkg. 1 Round keyed shaft • 1.6 to 25 HP • Direct and geared drive • Typical direct drive • s All models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. • All of the above motors are furnished less valve and piping as standard. Performancefigures are at 90 PSIG (620 kPa) air pressure.
Direct Drive Reversible
IRM
015
KK6MEE3GEE53GEE9GEE59G
475 (216)200 (90.7)220 (99.8)210 (95.3)230 (104)
255
6.84.76.5
18.643.735.073.514.85
75527530592100
1500560600190200
260122154357450
353165209484610
325175205510600
441237278692814
680155220155220
19.34.46.24.46.2
CCMDD6MEEMEE5MHHMHH5M
135 (61.2)135 (61.2)200 (90.7)210 (95.3)235 (107)250 (113)
2.052.64.47.811.315.2
1.531.943.285.828.4311.33
1075750735950730730
214014901450187514501500
13.2244160106146
17.932.555.681.4144198
18.834.259
80.5152195
25.546.480
109.2206264
9779137220270400
2.72.23.96.27.611.3
Geared Drive Reversible
Air Motors (continued)
No. HP KW
Speed @Max.PowerRPM
FreeSpeed s
RPM Lb./Ft. NM Lb./Ft. NM SCFM m3/mPkg. Wt.Lb. (kg)
Max. PowerStarting Torque
StallTorque
Air Consumption@ Max. Power
IRM
016
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
47
Series M002 Multi-Vane Air Motors • Std. Pkg. 1Round keyed shaft • Square shaft (optional) • Threaded shaft (optional) .11 to .25 HP • Geared drive• Flange mounted • s All models must be operated with sufficient load to prevent speed fromexceeding maximum allowable speed shown on performance curve.
* Applications with these models must be limited to 12 Lb./Ft. (16.3 Nm) torque. • Performance figures are at 90 PSIG (620 kPa) air pressure.
Series M002 Model Number Symbolization
M002RHR000AR3M002RHR004AR3M002RHR006AR3M002RHR008AR3M002RHR013AR3M002RHR021AR3M002RHR028AR3M002RHR044AR3M002RHR101AR3M002RHR159AR3
ReversibleM002RVR000AR3M002RVR004AR3M002RVR006AR3M002RVR008AR3M002RVR013AR3M002RVR021AR3M002RVR028AR3M002RVR044AR3M002RVR101AR3M002RVR159AR3
M 002 RV R 028 A R3
Motor HP Rotation Air inlet &exhaust
Gear ratio Flange Shaft
Non-Reversible • Direction of rotation is counterclockwise when facing the shaft.
0.250.220.220.220.190.190.190.190.160.16
0.190.160.160.160.140.140.140.140.120.12
12,25032502060152088055541026211271
26,00069204385324018401165860545228145
0.150.450.720.980.362.162.924.61*8.32*13.1
0.200.610.981.332.502.933.966.25*11.2*17.7
0.200.610.961.311.822.883.906.15*11.1*17.5
0.270.831.301.782.473.905.298.34*15.0*23.7
12.011.911.911.911.811.811.811.811.711.7
0.340.340.340.340.330.330.330.330.330.33
0.200.170.170.170.140.140.140.140.110.11
0.150.130.130.130.100.100.100.100.080.08
11,50030451930142582052038524010466
23,00060903860285016451045770485209132
0.130.400.640.871.171.852.503.96*6.78*10.7
0.180.540.871.181.582.513.395.37*9.19*14.5
0.180.540.861.161.562.473.345.28*9.05*14.2
0.240.731.171.572.113.354.537.16*12.2*19.3
9.89.79.79.79.69.69.69.69.59.5
0.280.270.270.270.270.270.270.270.270.27
1.00 (.45)1.00 (.45)1.13 (.51)1.00 (.45)1.13 (.51)1.13 (.51)1.13 (.51)1.13 (.51)1.19 (.54)1.19 (.54)
1.00 (.45)1.00 (.45)1.13 (.51)1.00 (.45)1.13 (.51)1.13 (.51)1.13 (.51)1.13 (.51)1.19 (.54)1.19 (.54)
Note: On all Series M002, M004, and M007 Air Motors, performance is the same for both directions of rotation. On non-reversiblemodels, direction of rotation may be easily changed without the need of additional parts by inverting cylinder.
Ingersoll-Rand Air Motors
Flexible, efficient alternatives to electric sources – perfect for awide range of industrial applications. Consider these advantages:• Infinitely variable speeds and torques via pressure regulation
or air valves – no costly controls required.• Instant starting, stopping and reversing eliminates the delays of
motor speed-up or slow-down periods.
• Will not overheat or burn out, even when overloaded or runto stall.
• Safe operation in hazardous conditions with no electricalsparks or hydraulic fluids.
• Cool running characteristics.• Low maintenance, based on simplicity of design and strength
of construction.• Excellent design flexibility – a function of compact size, light
weight, and high power output.
HP = Approximate HP range (.11 to .25)
Rotation = RV reversible, RH non-reversible, right hand fromrear of motor (CCW facing shaft), LH Non-reversible, left handfrom rear of motor (CW facing shaft).
Air Inlet & Exhaust = R Rear, S Side (side inlet and exhaustavailable on reversible models only).
Gear Ratio = 028 is 1 to 28, 044 is 1 to 44, etc.
Flange = A 2 hole flange, B 4 hole face mounting.
Shaft = R3 3/8" Round keyed • T3 3/8"-24 UNF-2A threaded.Threaded shaft extension is 1" (25.4 mm) with threaded lengthfrom shaft end of .87" (22 mm). Threaded shaft pilot at end is.315" (8 mm) Dia. Max. by .374" (9.5 mm) Long • SS 3/8" squaredrive. Square shaft extension is 1.791" (45.5 mm).
Air Motors (continued)
No. HP KW
Speed @Max.PowerRPM
FreeSpeed
sRPM Lb./Ft. NM Lb./Ft. NM SCFM m 3/m
Pkg. Wt.Lb. (kg)
Max. PowerStarting Torque
StallTorque
Air Consumption@ Max. Power
0.700.670.670.670.640.640.640.640.640.640.640.640.610.610.610.610.61
0.520.500.500.500.480.480.480.480.480.480.480.480.460.460.460.460.46
10,0002225152011207906254253352452101461077458473223
20,00044503045224015801250855675495420292215148117946447
0.471.942.843.864.976.299.211.615.818.626.936.748.161.076.5*111*152
0.642.633.855.236.748.5312.515.721.425.236.549.865.382.7104*151*206
0.632.593.785.146.638.3812.215.521.124.835.948.964.181.3102*148*202
0.853.515.136.978.9911.416.520.128.633.648.766.387.0110138*201*274
3333333333333333333333333333333333
0.930.930.930.930.930.930.930.930.930.930.930.930.930.930.930.930.93
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS48
HP = approximate horse power range (.61 to .85).
Rotation = RV Reversible, RH Non-reversible, right hand from rear of motor (CCW facing shaft), LH Non-reversible, left handfrom rear of motor (CW facing shaft).
Air Inlet & Exhaust = R Rear, S Side (side inlet and exhaust available on reversible models only).
Gear Ration = 021 is 1 to 21, 027 is 1 to 27, etc.
Flange = A2 hole flange, B 4 hole face mounting (on 000, 004,006, 009, 012, 015, 021, 027, 037, 044 gear rations), B 6 holeface mounting (on 063, 086, 116, 151, 188, 275, 374 gear ratios).
Shaft = R4 1/2" Round keyed (on 000, 004, 006, 012, 015, 021,027, 037, 044 gear ratios). • R6 3/4" Round keyed (on 063, 086,119, 151, 188, 275, 374 gear ratios). • S4 1/2" Square drive (on000, 004, 006, 009, 012, 015, 021, 027, 037, 044 gear ratios.)Shaft extension 1.31" (33.27 mm) • S5 5/8" Square drive (on 063,086, 119, 151, 188, 275, 374 gear ratios). Shaft extension 1.25"(31.75 mm) • T3 3/8" 24 UNF-2A threaded (on 000, 004, 006,009, 012, 015, 021, 027, 037, 044 gear ratios). • T4 1/2" 20UNF-2A threaded (on 000, 004, 006, 009, 012, 015, 021, 037,044 gear ratios).
Series M007 Multi-Vane Air Motors • Std. Pkg. 1 • Round keyed shaft • Square shaft (optional) • .61 to .85 HP • Geared drive. Flange or face mounted • s All models must be operated with sufficient load to prevent speed fromexceeding maximum allowable speed shown on performance curve • Applications with these models must be limited to 224 Lb./Ft. (304 Nm) torque • Performance figures are at 90 PSIG(620 kPa) air pressure.
Series M007Model NumberSymbolization
MMotor
007HP
RVRotation
RAir Inlet &
Exhaust
021Gear Ration
AFlange
R4Shaft
Non-Reversible • Direction of rotation is counterclockwise when facing the shaft.
Reversible
IRM
017
M007RHR000AR4M007RHR004AR4M007RHR006AR4M007RHR009AR4M007RHR012AR4M007RHR015AR4M007RHR021AR4M007RHR027AR4M007RHR037AR4M007RHR044AR4M007RHR063BR6M007RHR086BR6M007RHR119BR6M007RHR151BR6M002RHR188BR6M007RHR275BR6M007RHR374BR6
0.850.820.820.820.790.790.790.790.790.790.790.760.760.760.760.760.76
0.630.610.610.610.590.590.590.590.590.590.590.570.570.570.570.570.57
11,0002445167512308706854703702702321611188265523526
22,000489033502460174013709407405404653212361631291037052
0.582.393.504.766.197.8011.514.519.723.233.545.760.576.596
*140*191
0.793.244.756.456.3910.615.619.726.731.545.46282104130*190*259
0.773.194.666.348.2510.415.319.326.330.944.760.980.7102128*187*254
1.044.336.328.6011.214.120.726.235.741.960.682.6109138174*254*344
3636363636363636363636363636363636
1.021.021.021.021.021.021.021.021.021.021.021.021.021.021.021.021.02
3.06 (1.4)3.06 (1.4)3.06 (1.4)3.06 (1.4)3.5 (1.6)3.5 (1.6)3.5 (1.6)3.5 (1.6)3.5 (1.6)3.5 (1.6)7.13 (3.2)7.38 (3.2)7.38 (3.4)7.38 (3.4)7.38 (3.4)7.38 (3.4)7.38 (3.4)
M007RHR000AR4M007RHR004AR4M007RHR006AR4M007RHR009AR4M007RHR012AR4M007RHR015AR4M007RHR021AR4M007RHR027AR4M007RHR037AR4M007RHR044AR4M007RHR063BR6M007RHR086BR6M007RHR119BR6M007RHR151BR6M007RHR188BR6M007RHR275BR6M007RHR374BR6
3.06 (1.4)3.06 (1.4)3.06 (1.4)3.06 (1.4)3.5 (1.6)3.5 (1.6)3.5 (1.6)3.5 (1.6)3.5 (1.6)3.5 (1.6)7.13 (3.2)7.38 (3.2)7.38 (3.4)7.38 (3.4)7.38 (3.4)7.38 (3.4)7.38 (3.4)
Air Motors (continued)
No. HP KW
Speed @Max.PowerRPM
FreeSpeed s
RPM Lb./Ft. NM Lb./Ft. NM SCFM m 3/mPkg. Wt.Lb. (kg)
Max. PowerStarting Torque
StallTorque
Air Consumption@ Max. Power
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
49Starters
3BMG Up to 300 CID
(5 L)
Up to 600CID (10 L)
October 1958
Inertia 125/16 9 18 (8.16)
150LFGNon-Lube
600 to 1200 CID (10-20 L)
1200 to 2400 CID (20-40 L)
January 1989
Inertia 181/32 1319/32 38 (17.24)
5BMG 200 to 500
CID (3-8 L)
400 to 1000
CID (6-16 L)
September 1954
Inertia 151/2 115/8 18 (8.16)
150LFPNon-Lube
500 to 1200 CID (8-20 L)
1000 to 2400 CID (1640 L)
January 1989
Pre-engaged 181/32 1319/32 38 (17.24)
150BMG 600 to 1200 CID (10-20 L)
1200 to 2400CID
(20-40 L)
April 1966
Inertia 181/32 1319/32 38 (17.24)
150BMP 500 to 1200CID
(8-20 L)
1000 to 2400CID
(20-40 L)
April 1966
Pre-engaged 181/32 1319/32 40 (18.14)
SS815G,SS825G
1000 to12,000 CID (16-200 L)
2000 to24,000 CID (32-400 L)
February 1979
Pre-engaged 1925/32 1725/32 93 (42.18)95 (43.09)
SS10G 1000 to 8000 CID (16-130 L)
2000 to16,000 CID (32-260 L)
September 1983
Inertia 21 1513/16 87 (39.46)
SS850G 10,000 to12,000 CID (160-320 L)
20,000to24,000 CID (320-640 L)
February 1979
Pre-engaged 2227/32 151/2 123 (55.79)
ST750G,ST799G
1000 to8000 CID (16-130 L)
2000 to16,000 CID (32-260 L)
August 1989
Inertia 2235/64 1713/32 68 (30.84)
ST750G,ST799G
1000 to8000 CID (16-130 L)
2000to16,000 CID (32-260 L)
August 1989
Pre-engaged 2233/64 197/32 69 (31.30)
ST750G,ST799G
5000 to12,000 CID (80-200 L)
10,000 to24,000 CID (32-260 L)
August 1989
Pre-engaged 2233/64 197/32 69 (31.30)
ST750G,ST799G
10,000 to20,000 CID (160-320 L)
20,000 to40,000 CID (32-260 L)
August 1989
Pre-engaged 2443/64 1631/32 98 (44.45)
IRS
002
IRS
003
IRS
004
IRS
005
IRS
006
IRS
007
IRS
008
IRS
009
IRS
010
IRS
011
IRS
012
Std. Pkg. 1Engine DisplacementSeries
No. Diesel Carburated
InProduction
Since DriveLength
In.
Length fromMount.
Flange In.Pkg. Wt.Lb. (kg) I
RS
001
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS50Starters (continued)
IRS
013
Vane Starters
* These figures are only a guide – for difficult to start engines orfor operation under adverse conditions, use the next more pow-erful Starter. For 2-stroke diesel engines, these figures may bemultiplied by 1.5. Example: a 3BMG could be used in a 450 CID
2-stroke diesel engine. For carburated (gas) engines, these figuresmay be doubled. Example: a 150LFGE could be used on a 2400CID gasoline engine. **Torque values shown are stall torque.Breakaway torque will be approximately 60% of values shown.
Speed Air*For Diesel System **Max. Max at Max. Consumption
Engine Tune–Up Air Pressure, Torque, Power, Power, at Max. HP,Displacement Series Kit Gear Ratio PSIG Ft./Lb. HP RPM SCFSUp to 300 CID 3BMG 3BM-TK2 Direct 150 39 8.4 2800 4
(5 Liters)200 to 500 CID 5BMG 5BM-TK2 Direct 150 48 9.3 2700 4
(3 to 8 Liters)500 to 800 CID 150LFP 150 LF-TK1 C 150 100 28 2600 12(8 to 13 Liters) 150BMP 150 BM-TK2 C 150 126 34 2800 11
150LFP 150 LF-TK1 E 150 145 28 1900 13600 to 1200 CID 150BMP 150 BM-TK2 E 150 160 34 2100 12(10 to 12 Liters) 150LFG 150 LFG-TK1 E 150 145 28 1900 13
150BMG 150 BM-TK2 E 150 160 34 2100 12900 to 2000 CID 150BMP 150 BM-TK2 D 150 185 34 1850 12(15 to 32 Liters)
1000 to 8000 CID SS810G SS810-TK2 B 150 260 80 3200 27(16 to 130 Liters) SS815G SS800-TK2 B 150 260 80 3200 27
5000 to 12000 CID SS825G SS800-TK2 C 225 420 130 3000 38(80 to 200 Liters)
10,000 to 12,000 CID SS850G SS850-TK2 D 225 600 130 2200 38(160 to 320 Liters)
Speed Air*For Diesel System **Max. Max at Max. Consumption
Engine Gear Air Pressure, Torque, Power, Power, at Max. HP,Displacement Series Ratio Arc PSIG Ft./Lb. HP RPM SCFS
ST750G B Half 150 275 60 2300 201000 to 8000 CID ST799G B Full 90 310 64 2175 22(16 to 130 Liters) ST750G B Half 150 275 60 2300 20
ST799G B Full 90 310 64 2175 225000 to 12,000 CID ST750G C Half 150 320 60 1970 20
(80 to 200 Liters) ST799G C Full 90 360 64 1867 2210,000 to 12,000 CID ST750G C Half 150 430 130 2200 38
(160 to 320 Liters) ST799G C Full 90 490 64 1372 22
Series SS Air Starter SymbolizationSS350 G E 03 R 85 XX 02HSize Gas Gear Ratio SAE No. Rotation Pinion SR = Spark Orientation
Sealed Mounting Flange LH or RH Coding ResistantSS175 SS175 & SS810 & 01 = 1 R =SS350 SS350 SS815 03 = 3 RemanufacturingSS810 B = 2.00 B = 2.18 09 = 9SS815 E = 3.00 SS 850 (SS850 only)SS825 SS825 D = 3.44SS850 C = 2.53
Series ST700 Air Starter Symbolization
ST7 50 G B D P 03 R3 1 0 GSize % Arc Gas Gear Gear Type of SAE No. Rotation Pinion Inlet Drive
Sealed Ratio Case Drive Mounting LH or RH Coding HousingB = 2.18 Housing FlangeC = 2.53D = 3.44
Turbine Starters
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
51Starters (continued)
Pre–Engaged Versus Inertia StartersThere are two basic types of air starters, pre-engaged and inertia. With apre-engaged starter, the drive pinion is completely engaged with theengine ring gear before the starter begins to crank the engine. With aninertia starter, the rotating drive pinion engages the engine ring gearsimultaneously with the initial cranking of the engine.
“Special” Air StartersIngersoll-Rand offers the most complete line of air starters in the world.Additional models can be furnished, even if not listed in this catalog.Other special air starters can also be built to your specifications. Pleasecontact sales for complete information.
Vane Starters (continued)Vane
Air StartersTurbine Air Starters
(continued)
Turbine Air Starters
Turbine Starters (continued)
Series 150 Air Starter Symbolization
Series3BMG
5BMG
150BM
150BMG
150BMP
150BMPIn Line
150LFGLube Free
150LFPLube Free
SS350
SS810
SS815
SS825
SS850
ModelA11RH-1FA11RH-34FA11RH-60FA53RH-1FA53RH-2FA53RH-3FE21LH-11E21RH-6E21RH-6E21RH-5E88R54-200E88L54-200D88L54-020D88R54-020E21RH6-020E22RH5-020E88L54-020E88R54-020GE03R29-02HGE03R31-02HGE03L32-02HGB03L32GB03R31GB03L32GB03R31GC03L26GC03R25GD09L52GD09R51
150LF
150LFG150LFP
150LFP
E21LH11-000RE21LH11-020RE21RH6-020RE22RH5-020R C83LH11-020RC83RH5-020R C83RH51-020R C83RH6-020R C83RH6-020RE83LH11-000RE83LH11-1735R E83RH5-020RE83RH51-020RE83RH6-000RE83RH6-020RE83RH6-1734RD83LH50-020RD83RH46-020RE83LH11-020RE83RH6-02ER
ST750 GBDIO3R31GBDIO3L32GBDPO3R31GBDPO3L32GCDPO3L26GCDPO3R25GDDPO9L52GDDPO9R51
SeriesST799
ModelGBDIO3R31GBDIO3L32GBDPO3R31GBDPO3L32GCDPO3L26GCDPO3R25GDDPO9L52GDDPO9R51
3BMG
5BMG
150BM
150BMG
150BMP
SS175SS350
SS810
SS815
SS825
SS850
A11RH-1FRA11RH-34FRA11RH-1R A11RH-2R A12RH-3FRA12RH-5FR C21LH11-1590RE21LH-11RE21RH-6RE21LH-11R E21RH-6RE21RH-5RD89LH-50RD89RH-46R E78RH-5RE78RH-6R E78RH- 6/BR110RE78RH-53R E78RH-54R E78LH-11R E78RH-51R E83LH-11R E83LH11-1335R ER/VRSM-903R ER/VRSM-1197R GE03R15-02JRGB01R77R GB01R85-00FR GB01R85-02HR GB03R15-01JR GE03R31RGE03R85-02HR GE03L32R GE3L32-011R GE03R29RFGB03R31-02NRGB03L32RGB03R31RFGB03R31-02ARGB03L32R GB03R31R GC03R25RGC03L26R GC03R25-11PRGD09L52RGD09R51R
Recom’d Recom’dGear Drive Pinion Tank Hose GasCase Type Type Size, Gal. Size Seated
In-Line Inertia Caged 35 #12 Yes
In-Line Inertia Caged 45 #12 Yes
Offset Pre-engaged Caged 60 #16 or #20 YesOffset Pre-engaged Caged 60 #16 or #20 YesOffset Pre-engaged Caged 60 #16 or #20 NoOffset Pre-engaged Caged 60 #16 or #20 NoOffset Inertia Caged 60 #16 or #20 YesOffset Inertia Caged 60 #16 or #20 Yes
In-Line Pre-engaged Caged 60 #20 No
Offset Inertia Caged 100 #24 YesOffset Pre-engaged Overhung 100 #24 Yes
Offset Pre-engaged Overhung 100 #24 Yes
Offset Pre-engaged Overhung 100 #24 Yes
Recom’d Recom’dGear Drive Pinion Tank Hose GasCase Type Type Size, Gal. Size SeatedOffset Inertia Caged 100 #20 or #24 YesOffset Inertia Caged 100 #20 or #24 YesOffset Pre-engaged Overhung 100 #20 or #24 YesOffset Pre-engaged Overhung 100 #20 or #24 YesOffset Pre-engaged Overhung 100 #20 or #24 YesOffset Pre-engaged Overhung 100 #20 or #24 YesOffset Pre-engaged Overhung 100 #20 or #24 YesOffset Pre-engaged Overhung 100 #20 or #24 Yes
150 LFP E 83 RH 6 020Size Type Gear Drive Rotation Pinion Orientation
Ratio Housing LH of RH CodingLFP C = 2.69 21LFG C = 3.94 78BMP C = 3.46 83BMG
Remanu. Non–LubeVane Starters
RemanufacturedVane Starters
IRS
014
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS52
IRS
015
IRS
016
IRS
017
IRS
018
IRS
019
Starter System Components
No.Thread Size, NPT In.
For Starter SeriesPkg. Wt. Lb. (kg)
No.Thread Size, NPT In.
For Starter SeriesPkg. Wt. Lb. (kg)
No.Thread Size, NPT In.
Pkg. Wt. Lb. (kg)
No.Thread Size, NPT In.
For Starter SeriesPkg. Wt. Lb. (kg)
No.Thread Size, NPT In.
VoltagePkg. Wt. Lb. (kg)
Relay Valves • Std. Pkg. 1• Provide immediate response to assure air starter disengagement and prevent damage to the pinion or flywheel ring gear.
Std. Pkg. 1• Designed specifically for compressors, offshoreand marine applications, or where natural gas is used.Features a heavy-duty stainless steel housing.
Solenoid Actuated Control Valves •Std. Pkg. 1• These DC electrically actuated valves are designed for pilot operation of the I-R relay valve and are approved for applications affected by the U.S. Department
Manually Actuated Control Valves • Std. Pkg. 1 • A manually actuated push button valve designed for pilot operation of the I-Rrelay valve. Simple and reliable, this brass bodied valve readily mounts in a 7/8" Diameter hole on dashboards or control panels.
Mufflers • Std. Pkg. 1• These self-cleaning, non-freezing mufflers efficiently reduce operating noise levels while providing minimalpower loss. Constructed of die cast aluminum for lighter weight, greater strength and vibration resistance, theycan be either directly of remotely mounted to the starter for all applications except gas.
SRV1001
3BMG, 5BMG, SS175G.6 (.27)
SRV12511/4
150BM, 15OLF, SS35OG.8 (.36)
SRV15011/2
SS800, ST700.10 (.05)
150BMP-1051B1/4
12 VDC.4 (.18)
150BMP-2451B1/4
24 VDC.4 (.18)
150BMP-64511/4
64 VDC.4 (.18)
SMB-6181/8
.2 (.09)
SMB-G6181/8
.2 (.09)
3BM-WM071
3BM, 5BM6.4 (2.90)
150BM-A67411/4
150BM, 150LF, SS1757.2 (3.27)
SS350-A67411/2
SS3507.9(3.58)
SRV150SS11/2
SS800, ST700.10 (.05)
IRS
020
No.Thread Size, NPT In.
Length In.Width In.
Pkg. Wt. Lb. (kg)
EU-A2673/4-1443/423/4
.08 (.04)
K4U-A267AT11/4-111/2
65/833/4
1.6 (.73)
ST900-267-27-2411/2-111/2
71/241/2
2.4 (1.09)
ST900-267-322-111/2
81/85
3.6 (1.63)
Air Strainers • Std. Pkg. 1 • Used on applications to assure long starter life where air or gas is contaminated.
IRS
021
No.Thread Size, NPT In.
For Starter SeriesPkg. Wt. Lb. (kg)
150BM-A73511/4
150BM, 15OLF, SS1751.6 (.73)
SS350-73511/2
SS3503.6 (1.63)
SS800-A73521/2
SS8004.8 (2.18)
Road Splash Deflectors • Std. Pkg. 1 • Constructed of all corrosion resistant materials, these road splash deflectors are designed to prevent contamination from entering the exhaust port of the starter.
IRS
022
No.Thread Size, NPT In.
DescriptionPkg. Wt. Lb. (kg)
Gladhand • Std. Pkg. 1 • Should system pressure ever be lost, the gladhand makes it simple to pump up yoursystem from any nearby truck.
150BMP-10581/2-14
Gladhand.8 (.36)
150BMP-1158C–
Gladhand bracket.6 (.27)
IRS
023
No.Thread Size, NPT In.
Lubricant Supplied per StartPkg. Wt. Lb. (kg)
Injector Lubricators • Std. Pkg. 1 • These small, rugged one-shot lubrication devices dispense a controlledamount of lubricant each time the air starter is engaged. Because the lubricators can withstand oil pressures of50 PSI, fuel oil is prevented from leaking through the starter, even if there is a blockage of the fuel return line.
HDL23/8
1.3cc.04 (.02)
HDL33/8
.4cc.04 (.02)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
53
Production Drills • Series 50 Drills .55 HP (.4kW) • Std. Pkg. 1
Capacity: 3/8" (9 mm) chuck. Ergonomically-correct handle styling and lightweight, compact size enhance operator comfort. Responsive two-stage trigger and variable-speedlever throttle provide optimum control when starting a hole.
Standard Equipment: 46328 Suspension bail on lever throttle models.
To Order: Add the appropriate dash letter to indicate the desired spindle option from thechart below.
No.Speed RPM
Stall Torque Ft.Lb. (Nm)CFM (L/s)
Pkg. Wt. Lb. (kg)
DG051B-180-( )18,000.7 (1)
26 (12)2.2 (1.0)
DG051B-52-( )5200
2.4 (3)26 (12)2.2 (1.0)
DG051B-33-( )3300
3.5 (5)26 (12)2.2 (1.0)
DG051B-27-( )2700
4.1 (5.5)26 (12)2.2 (1.0)
No.Speed RPM
Stall Torque Ft.Lb. (Nm)CFM (L/s)
Pkg. Wt. Lb. (kg)
DG051B-15-( )1500
8.0 (11)26 (12)2.5 (1.1)
DG051B-11-( )1100
9.5 (13)26 (12)2.5 (1.1)
DG051B-6-( )600
17.0 (23)26 (12)2.5 (1.1)
DG051B-4-( )400
29 (39)26 (12)2.5 (1.1)
No.Speed RPM
Stall Torque Ft.Lb. (Nm)CFM (L/s)
Pkg. Wt. Lb. (kg)
DL051B-52-( )5200
2.4 (3)26 (12)2.2 (1.0)
DL051B-33-( )3300
3.5 (5)26 (12)2.2 (1.0)
DL051B-27-( )2700
4.1 (5.5)26 (12)2.2 (1.0)
No.Speed RPM
Stall Torque Ft.Lb. (Nm)CFM (L/s)
Pkg. Wt. Lb. (kg)
DL051B-15-( )15,0008.0 (11)26 (12)2.5 (1.1)
DL051B-11-( )1100
9.5 (13)26 (12)2.5 (1.1)
DL051B-6-( )600
17.0 (23)26 (12)2.5 (1.1)
DL051B-4-( )400
29 (39)26 (12)2.5 (1.1)
Lever Models
Pistol Models
Lever Models
XXXX
NRXX
XXXX
NRXX
XXXXXXX
XXXXXXX
XXXXXXX
XXXXXXX
XXXXXXX
XNRNRNRNRX
NR
ABJKLPQ
Spindle Option
DashLetter
400Reversible
400
600Reversible
600
1100Reversible
1000
1500Reversible
1500
2700Reversible
2500
3300Reversible
3000
5200Reversible
5000
18000Reversible
17000
X indicates the speeds on which a particular spindle option is available.NR indicates that the spindle option is not recommended for a particular speed tool.
1/4" (6 mm) Cap. chuck3/8" (9 mm) Cap. chuck3/8" Square drive1/2" Square drive 3/8" (9 mm) Cap. keyless chuck3/8"-24 Thread only1/4" Hex quick-change chuck
No.Speed RPM
Stall Torque Lb. Ft. (Nm)CFM (L/s)
Pkg. Wt. Lb. (kg)
DL021B-220-( )22,000.2 (.3)20 (9)1.0 (.5)
DL021B-64-( )6400.7 (1)20 (9)1.0 (.5)
DL021B-33-( )3300
1.3 (2)20 (9)1.0 (.5)
DL021B-19-( )1900
2.3 (.3)20 (9)1.1 (.5)
DL021B-10-( )1000
4.5 (6)20 (9)1.1 (.5)
DL021B-5-( )500
8.9 (12)20 (9)1.1 (5)
Free Speed RPMSeries 20 Models Spindle Options
ARO
001
ARO
002
ARO
003
Drills
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS54
No.Speed RPMClutch Type
Stall Torque Lb. Ft. (Nm)CFM (L/s)
Pkg. Wt. Lb. (kg)
SA053B-25-Q2500
Adj. ball–
30 (14)2.6 (1.2)
SA053B-17-Q1700
Adj. ball–
30 (14)2.8 (1.3)
SA053B-10-Q1000
Adj. ball–
30 (14)2.8 (1.3)
SA053B-8-Q800
Adj. ball–
30 (14)2.8 (1.3)
Auto Start
Accessories at Extra Cost
No.For Models
Pkg. Wt. Lb. (kg)
46344-(10)All
.11 (.05)
46472All pistol.13 (.06)
46724Auto start & lever
.17 (.08)
46490All
.28 (.13)
47822Auto start & lever
.2 (.09)
Extension finder kit
Suspension bail
Rubber grip
24" (610 mm)exhaust hose
Bio-mechanicalflange
Screwdrivers & NutsettersProduction Screwdrivers Series 50 Screwdrivers • .5 HP (.4kW) • Std. Pkg. 1 • 10 to 120 Lb. in torque range. Wide speed rangeand complete clutch selection ensures the right tool for the job for maximum quality and efficiency. For critical torque control, automatic shut-off clutch provides accurate, repeatable torque output. Convenient reverse mechanisms enable fast, one-hand directional control. Available front-end options accommodate a wide range of bits to meet fastener requirements.Standard Equipment: Suspension bail on auto-start and lever throttle models. Quick-Change assembly.
No.Speed RPMClutch Type
Stall Torque Ft. Lb. (Nm)CFM (L/s)
Pkg. Wt. Lb. (kg)
SG051B-25-Q2500
Direct drive
45 (4.0)20 (9.4)2.2 (1.0)
SG051B-17-Q1700
Direct drive
65 (7.3)20 (9.4)2.4 (1.1)
SG051B-10-Q1000
Direct drive
90 (10.2)20 (9.4)2.4 (1.1)
SG051B-8-Q800
Direct drive
120 (13.6)20 (9.4)2.4 (1.1)
SG052B-25-Q2500
Positive, Angle jaws
45 (4.0)20 (9.4)2.4 (1.1)
SG052B-17-Q1700
Positive, Angle jaws
65 (7.3)20 (9.4)2.6 (1.2)
No.Speed RPMClutch Type
Stall Torque Ft. Lb. (Nm)CFM (L/s)
Pkg. Wt. Lb. (kg)
SG052B-10-Q1000
Positive, Angle jaws90 (102)20 (9.4)2.6 (1.2)
SG052B-8-Q800
Positive, Angle jaws120 (13.6)20 (9.4)2.6 (1.2)
SG053B-25-Q2500
Adj. ball
–20 (9.4)2.9 (1.4)
SG053B-17-Q1700
Adj. ball
–20 (9.4)3.1 (1.5)
SG053B-10-Q1000
Adj. ball
–20 (9.4)3.1 (1.5)
SG053B-8-Q800
Adj. ball
–20 (9.4)3.3 (1.5)
S X 05 X B XX X
ToolScrewdriver Power
.5 HP(Series 50)
Handle StyleA = Auto startG = Pistol grip
L = Lever throttle
Pistol Grip
ModelIdentification
Clutch1 = Direct drive
2 = Positive (angle jaws)3 = Adjustable ball4 = Auto shut-off
5=Positive (90° jaws)
Speed – RPM8 = 800
10 = 100017 = 170025 = 2500
ToolGeneration
No.Speed RPMClutch Type
Stall Torque Lb. Ft. (Nm)CFM (L/s)
Pkg. Wt. Lb. (kg)
SL051B-25-Q2500
Direct drive
45 (4.0)20 (9.4)2.2 (1.0)
SL051B-17-Q1700
Direct drive
65 (7.3)20 (9.4)2.4 (1.1)
SL051B-10-Q1000
Direct drive
90 (102)20 (9.4)2.4 (1.1)
SL051B-8-Q800
Direct drive
120 (13.6)20 (9.4)2.4 (1.1)
SL052B-25-Q2500
Positive, Angle jaws
45 (4.0)20 (9.4)2.4 (1.1)
SL052B-17-Q1700
Positive, Angle jaws
65 (7.3)20 (9.4)2.6 (1.2)
No.Speed RPMClutch Type
Stall Torque Lb. Ft. (Nm)CFM (L/s)
Pkg. Wt. Lb. (kg)
SL052B-10-Q1000
Positive, Angle jaws90 (102)20 (9.4)2.6 (1.2)
SL052B-8-Q800
Positive, Angle jaws120 (13.6)20 (9.4)2.6 (1.2)
SL053B-25-Q2500
Adj. ball
–20 (9.4)2.9 (1.4)
SL053B-17-Q1700
Adj. ball
–20 (9.4)3.1 (1.5)
SL053B-10-Q1000
Adj. ball
–20 (9.4)3.1 (1.5)
SL053B-8-Q800
Adj. ball
–20 (9.4)3.1 (1.5)
Lever Throttle
Drive OptionQ = Quick-Change
assemblyA = Guide for Apex magnetic bit holder
M = Guide for Magna magnetic bit holder
F = Standard length finder(also specify desired finder
No. from chart below
ARO
004
ARO
005
ARO
006
ARO
007
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
55
ARO
008
ARO
009
ARO
010
Right-Angle Grinders .5 HP (.4 kW)Lever Throttle • Capacity: 1/4" x 4" Type 27 and 28wheel •1" Mounted stone • 3" Sanding pad Designed for tough, hard-to-reach applications infoundries, shipyards, metal fab shops, power plantsand general plant maintenance.
No.Free Speed RPM
Spindle Thread MaleWheel Capacity Dia. In. (mm)
CFM (L/s)Pkg. Wt. Lb. (kg)
8317-L-114,0003/8-244 (102)
25 (11.8)2.7 (1.2)
No cost options (order "with" option) for Nos. 8317 & 8318: No. 45779 Lock-off lever.
Abrasive Tools
No.Free Speed RPM
Std. Collet Size In. (mm)Throttle Style
CFM (L/s)Pkg. Wt. Lb. (kg)
7980-285,0001/8 (3)Lever9 (4.3)
.88 (.40)
7980-A85,0001/8 (3)Twist
9 (4.3).88 (.40)
797860,0001/8 (3) Slide
6 (2.8).33 (.15)
GH011A-600-160,0001/8 (3) Twist
7 (3.3).15 (.07)
Turbine Grinders • Capacity: 1/8" Carbide bur • 3/8" Mounted stone • Ideal high-speed tools for final cleaning / polishing of dies.Pencil Grinders • .1 HP (.08 kW) • Capacity: 1/4" Carbide bur grinder • 1/4" Mounted stone • Excellent for intricate grinding applications, including mold finishing, deburring, cleaning and polishing.
Standard Equipment: Collet with insert • Collet wrenches • 6'-long x 7/32" ID (1.8 m x 6 mm) air hose and 18"-long exhaust overdose on Nos. GH011A-600-( ).
Right Angle Grinders and Sanders .3 HP (.2 kW) • Lever throttle • Capacity: A, B and W shapes 3" sanding pad. Ideal for finishing hard-to-reach areas, such as tight corners, irregular contours and small orifices. Can be used to finish metal, fiberglass and wood. Right-Angle Sander .3 HP (.2 kW) • Excellent tool for contour sanding and for finishing in limited accessareas. Standard Equipment: Collet on Nos. 7581-F and 8479-( ).
No.Free Speed RPM
Collet Size or Spindle Thread In.-Thread CFM (L/s)
Pkg. Wt. Lb. (kg)
7581-F14,000
1/417 (8)2.0 (.9)
8479-112,000
1/414 (6.6)1.2 (.7)
8479-220,000
1/417 (8)1.2 (.7)
8480-112,000
1/4-20 Male14 (6.6)1.2(.7)
8480-220,000
1/4-20 Male17 (8)1.2 (.7)
ARO
012
ARO
013
No.For ModelsDescription
Pkg. Wt. Lb. (kg)
41750 - ( )8479
Collect insert
.06 (.03)
45953All
Lock-off lever
.15 (.07)
44648All
2" Sanding back-up pad*
.45 (.20)
44647All
3" Sanding back-up pad*
.65 (.29)
No Cost Options Order "with" option. Extra Cost AccessoriesGrinder / Sander Options Std. Pkg. 1
* Back-up pads will adapt to either a 1/4" collet or 1/4-20 UNC-male spindle. Pads accept fast locking type sanding disc.
Orbital Sanders • .3 HP (.2 kW) • Std. Pkg. 1 • With Cushion Grip Sleeve • Capacity: 32/3" x 9" Papersize. Low vibration and palm grip provide comfortable operation and minimize operator fatigue.
Standard Equipment: Sanding back-up padExtra Cost Accessories: No. 37699-( ) Piped exhaustassembly for Nos. 8448.
Palm Grip No.Pad Thickness In. (mm)
Pad Material CFM (L/s)
Pkg. Wt. Lb. (kg)
8448-A1C5/16 (8)
Felt16.8 (7.9)3.5 (1.6)
8448-A3C1/2 (13)
Sponge rubber16.8 (7.9)3.5 (1.6)
8448-A3K1/2 (13)
Sponge rubber16.8 (7.9)3.8 (1.7)
Random Orbital Sanders • .3 HP (.2 kW) • Capacity: 5" and 6" Dia. sanding pad. Lube-freeoperation. Superior dust evacuation and non-marring shrouds. Smooth, "no-swirl" performance.Standard Equipment: 30131 Pad wrench – all 8446 models; 30131-2 Pad wrench – all 8447 and8457 models • 5/16" ID x 6' Whip hose – All 8447 and 8457 models; 44545-6 6' Vacuum hoseassembly and 48275-1 dust collection bag – all 8457 models; Sanding pad – all models; Spindle thread (female) 5/16"-24.
No.Pad Size In. (mm)
Pad FaceCFM (L/s)
Pkg. Wt. Lb. (kg)
8446-B5C-D5 (127)Duck 18.5
2.3 (1.0)
8446-B5C-V5 (127) Vinyl18.5
2.3 (1.0)
8446-B6C-D6 (152)Duck18.5
2.3 (1.0)
8446-B6C-V6 (152)Vinyl18.5
2.3 (1.0)
8446-B5K-D5 (127)Duck18.5
2.3 (1.0)
8446-B5K-V5 (127)Vinyl18.5
2.3 (1.0)
8446-B6K-V6 (152)Vinyl18.5
2.3 (1.0)
Palm Style with Cushion Grip Sleeve Long Handle with Cushion Grip Sleeve
ARO
011
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS56
ARO
014
ARO
015
Abrasive Tools (continued)
Mini Random Orbital Sanders • .2 HP (.15 kW) • Capacity: 5" and 6" Dia. sanding pad. Well suited for the smaller hands of femaleoperators. Lube-free operation. Superior dust evacuation and non-marring shrouds. Smooth, "no-swirl"performance. • Standard Equipment: 30131-2 Pad wrench – all models; 44546-6 6" Vacuum hoseassembly and 48275-1 dust collection bag – all 8418 models; Sanding pad – all models • Spindle thread(female) 5/16"-24.
No.Pad Size In. (mm)
Pad FaceCFM (L/s)
Pkg. Wt. Lb. (kg)
8416-B5T-D5 (127)Duck 12.5
2.3 (1.0)
8416-B5T-V5 (127)
Vinyl12.5
2.3 (1.0)
8416-B6T-V6 (152)
Vinyl12.5
2.3 (1.0)
No.Pad Size In. (mm)
Pad FaceCFM (L/s)
Pkg. Wt. Lb. (kg)
8418-B5T-V5 (127)Vinyl12.5
2.2 (1.0)
8418-B6T-V6 (152)
Vinyl12.5
2.2 (1.0)
8418-B5M-V5 (127)
Vinyl12.5
2.2 (1.0)
Non-Vacuum Models with Cushion Grip Sleeve
Long ShroudShort ShroudVenturi Vacuum System Models with Cushion Grip Sleeve
AJX
001
AJX
002
Zip Gun Tools.401 Shank No..498 Shank No.
Description
Pkg. Wt. Lb. (kg)
901965
Universal joint & tie rod tool
.5 (.23)
902–
Tail pipe cutter
.5 (.23)
903-3/4 903-1968
Fork chisel
.5 (.23)
904–
Brushingremover chisel
.5 (.23)
.401 Shank No.
.498 Shank No.Description
Pkg. Wt. Lb. (kg)
905955
Wide chisel & scraper11/4" blade.05 (.02)
906964
Bushing splitter
.05 (.02)
907–
Claw ripper edging tool
.5 (.23)
908–
Muffler cutter
.5 (.23)
.401 Shank No.
.498 Shank No.Description
Pkg. Wt. Lb. (kg)
909 909-BC959 –
Panel Panel cutter cutter,
non-spark material
.5 (.23)
910960-5/8
Flat chisel3/4" blade
.5 (.23)
910-11–
11" Flat chisel 3/4" blade
.65 (.29)
910-18960-18
18" Flat chisel 3/4" blade
.75 (.34)
AJX
003
.401 Shank No.
.498 Shank No.Description
Pkg. Wt. Lb. (kg)
910-1/2–
Flat chisel1/2" blade
.5 (.23)
910-11/2960-1-1/2Flat chisel11/2" blade
.65 (.29)
910-2-BC–
2" Flat chisel non-spark material.65 (.29)
911961
Tapered punch
.5 (.23)
.401 Shank No.
.498 Shank No.Description
Pkg. Wt. Lb. (kg)
912962
Rivet cutter
.5 (.23)
913963
Straight punch
.5 (.23)
914–
Vee chisel-spot weld breaker.5 (.23)
.401 Shank No.Description
Pkg. Wt. Lb. (kg)
925Pencil point
.5 (.23)
925-1818" Pencil point
.5 (.23)
930Muffler pipe cutter
.5 (.23)
932Kwik cutter
.5 (.23)
.401 Shank No.Description
Pkg. Wt. Lb. (kg)
916Piercing
punch #6.5 (.23)
918Piercing
punch #8.5 (.23)
920Piercing
punch #10.5 (.23)
922Angle chisel
.5 (.23)
923Single
blade cutter.5 (.23)
AJX
004
AJX
005
AJX
006
AJX
007
AJX
013
AJX
010
AJX
011
AJX
012
AJX
014
AJX
015
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
57Zip Gun Tools (continued)
.401 Shank No.
.498 Shank No.Description
Pkg. Wt. Lb. (kg)
933–
Inside muffler cutter
.5 (.23)
934–
Outside mufflercutter
.5 (.23)
940–
Moil point
.5 (.23)
945967
Hammer1" Diameter
.5 (.23)
.401 Shank No.Description
Pkg. Wt. Lb. (kg)
951Undercoat scraper
.5 (.23)
1100Nut splitter10" – 5/16"
.5 (.23)
1100-18Nut splitter18" – 5/16"1.0 (.45)
1101Nut splitter10" – 3/8".5 (.23)
1101-18Nut splitter18" – 3/8"1.0 (.45)
AJX
008
AJX
009
No.Description
Width In. (mm)Pkg. Wt. Lb. (kg)
396Chisel
3/4 (19).50 (.23)
397Wide chisel
13/8 (35).50 (.23)
398Angle chisel
13/8 (35).50 (.23)
399Scraper 2 (50)
.50 (.23)
399-3Scraper3 (75)
.50 (.23)No.
DescriptionWidth In. (mm)
Pkg. Wt. Lb. (kg)
3224Diamond point
1/4 (6).50 (.23)
3225Round nose
1/4 (6).50 (.23)
3226Cape chisel
1/4 (6).50 (.23)
3201Panel cutter
-.50 (.23)
3280 (9")Heavy blade flat
11/4 (32).50 (.23)
Std. Pkg. 1 • For Ingersoll-Rand 172 & 182 scalers, Chicago Pneumatic, Keller, Thor, Sioux, Aro, Ajax 1400, Rockwell.
7" (178 mm) Length
7" (178 mm) Length
7" (178 mm) LengthNo.
DescriptionWidth In. (mm)
Pkg. Wt. Lb. (kg)
392Chisel
3/4 (19).50 (.23)
393Wide chisel
13/8 (35).50 (.23)
394Angle chisel
3/8 (35).50 (.23)
390Scraper 2 (50)
.50 (.23)
390-3Scraper3 (75)
.50 (.23)
No.Description
Width In. (mm)Pkg. Wt. Lb. (kg)
No.Description
Width In. (mm)Pkg. Wt. Lb. (kg)
3230Diamond point
1/4 (6).50 (.23)
3231Round nose
1/4 (6).50 (.23)
3232Cape chisel
1/4 (6).50 (.23)
3241Panel cutter
–-.50 (.23)
392-12Chisel
3/4 (19).80 (.36)
393-12Wide chisel
13/8 (35).80 (.36)
394-12Angle chisel
13/8 (35).80 (.36)
392-18Chisel
3/4 (19)1.3 (.59)
393-18Wide chisel
13/8 (35)1.3 (.59)
394-18Angle Chisel
13/8 (35)1.3 (.59)
Std. Pkg. 1 • For Ingersoll-Rand 183 scalers, Cleco, Rotor, Aro, and CP 9356.
Weld Flux Chisels
No.Description
Width In. (mm)Pkg. Wt. Lb. (kg)
386Chisel
3/4 (19).50 (.23)
387Wide chisel
13/8 (35).50 (.23)
388Angle chisel
13/8 (35).50 (.23)
389Scraper 2 (50)
.50 (.23)
No.Description
Width In. (mm)Pkg. Wt. Lb. (kg)
386-12Chisel
3/4 (19).80 (.36)
387-12Wide chisel
13/8 (35).80 (.36)
388-12Angle chisel
13/8 (35).80 (.36)
386-18Chisel
3/4 (19)1.3 (.59)
387-18Wide chisel
13/8 (35)1.3 (.59)
388-18Angle chisel
13/8 (35)1.3 (.59)
Std. Pkg. 1 • For Master Power, Black & Decker, Rodac scalers.
No.Description
Width In. (mm)Pkg. Wt. Lb. (kg)
396-12Chisel
3/4 (19).85 (.39)
397-12Wide chisel
13/8 (35).85 (.39)
398-12Angle chisel
13/8 (35).85 (.39)
3280-12Heavy blade
flat11/4 (32).85 (.39)
396-18Chisel
3/4 (19)1.3 (.59)
397-18Wide chisel
13/8 (35)1.3 (.59)
398-18Angle chisel
13/8 (35)1.3 (.59)
18" (457 mm) Length12" (305 mm) Length
12" (305 mm) Length 18" (457 mm) Length
12" (305 mm) Length 18" (457 mm) Length
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS58
No.Description
Width In. (mm)Pkg. Wt. Lb. (kg)
382Chisel
3/4 (19).50 (.23)
383Wide chisel
13/8 (35).50 (.23)
384Angle chisel
13/8 (35).50 (.23)
380Scraper
2 (50).50 (.23)
390-3Scraper
3 (75).50 (.23)
3227Diamond
point1/4 (6)
.50 (.23)
3228Round nose
1/4 (6).50 (.23)
3229Cape chisel1/4 (6)
.50 (.23)
3221Panel cutter
–-.50 (.23)
3221-BCPanel cutter
–.50 (.23)
No.Description
Width In. (mm)Pkg. Wt. Lb. (kg)
382-12Chisel
3/4 (19).80 (.36)
383-12Wide chisel
13/8 (35).80 (.36)
384-12Angle chisel
13/8 (35).80 (.36)
382-18Chisel
3/4 (19)1.3 (.59)
383-18Wide chisel
13/8 (35)1.3 (.59)
384-18Angle chisel
13/8 (35)1.3 (.59)
380-BCScraper2 (50)
.50 (.23)
Std. Pkg. 1 • For Ingersoll-Rand 171 & 181 scalers, URYU, Jet Scalers, 380-BC and 3221-BC.
Non-SparkMaterial
AJX
016
AJX
017
No.Description
Inside Dia. In. (mm)Pkg. Wt. Lb. (kg)
205Chicago
PneumaticBoyer, 50, 60,80, 80X, 90
2.445 (62)2.8 (1.13)
209Chicago
PneumaticBoyer No 11
2.445 (62)2.8 (1.13)
207Chicago
PneumaticRivet Busters
81X, 11X
2.570 (65)3.2 (1.45)
205Ingersoll-Rand4A, 5A, 6A,
8A, 9A
2.445 (62)2.8 (1.13)
205Jet RB9,RB91
2.445 (62)2.8 (1.13)
205Thor 50, 53,
60, 63, 80, 83,90, 93
Jet RB-11
2.385 (61)2.8 (1.13)
205Cleco 50, 60,
80, 90
2.416 (61)2.8 (1.13)
Buster Retainers
Description
RetainerUpper sleeveLower sleeve
RubberBumper Tools
StandardStraightShank
205212214215
–
Oversize1-11/32"(34mm)Straight Shank
205211, 270214, 273215, 215
–
CP. No. 111-11/32"(34mm)StraightShank
209270274275
–
JetRB - 90
205212214215
–
ChicagoPneumaticNo. 81X
207272274275
Jumbo
ChicagoPneumaticNo. 11X
207272274275
Jumbo
ChicagoPneumaticNo. 80X
205213214215
Standard
ThorNo. 900
–211, 270214, 273215, 215Standard,
jumbo
Ingersoll-Rand
No. 9000 -9001
-272, 272-4274, 274-4275, 275Jumbo,
standard
For Riveting Hammers For Rivet Busters
No.Description
Pkg. Wt. Lb. (kg)
Jumbo Rivet Buster Retainers and Sleeves
No.Length In. (mm)
Pkg. Wt. Lb. (kg)
2219 (229)1.8 (.83)
221-1212 (305)2.4 (1.11)
221-1818 (457)3.7 (1.66)
2229 (229)1.8 (.83)
2419 (229)2.0 (.92)
2459 (229)1.8 (.83)
24612 (305)2.4 (1.11)
246-1818 (457)3.7 (1.66)
Standard Rivet Buster Four Side ToolsSide CutChisel Ripper Moil Point
Std. Pkg. 1 For 81X and 11X Busters
207Retainer
3.18 (1.44)
272Upper sleeve
.54 (.24)
206Lock spring
.06 (.03)
215Rubber bumper
.08 (.04)
274Lower sleeve
.80 (.30)
275Rubber bumper
.10 (.05)
No.Description
Pkg. Wt. Lb. (kg)
Standard Rivet Buster Retainers and Sleeves
205Retainer
2.60 (1.18)
212Upper sleeve
.32 (.15)
206Lock spring
.06 (.03)
214Lower sleeve
.56 (.25)
215Rubber bumper
.08 (.04)
Retainers • Std. Pkg. 1 • Furnished with following inside diameter for various hammers listed.
Std. Pkg. 1
Std. Pkg. 1Chisel
AJX
018
AJX
019
AJX
020
AJX
021
Weld Flux Chisels (continued)
12" (305 mm) Length 18" (457 mm) Length
7" (178 mm) Length
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
59
Exchanger Tube Back Out Punch • Std. Pkg. 1 • Furnished for 1/2" (13mm), 5/8"(16mm), 3/4" (19mm), 7/8" (22mm), 1" (25mm), 11/8" (29mm), and 11/4" (32mm)
dia. tubes • Furnished for various gauge tubes as may be specified • Furnished with 4" (102mm), 6"(152mm) or 8" (203mm) clearance. Please specify size and gauge of tube and length of clearance wanted.
No.Length In. (mm)
Pkg. Wt. Lb. (kg)
No.Rivet Size In. (mm)Clearance In. (mm)
Pkg. Wt. Lb. (kg)
No.Pkg. Wt. Lb. (kg)
2944.4 (2.0)
Jumbo Rivet Buster Four Side ToolsChisel • Std. Pkg. 1
Long Clearance Back Out Punch • Std. Pkg. 1
Side Cut ChiselStd. Pkg. 1
27691/2 (241)
2.29 (1.04)
276-1212 (305)
2.92 (1.32)
276-1818 (457)
4.36 (1.98)
2875/8 (16)8 (203)
2.59 (1.17)
2903/4 (19)8 (203)
2.90 (1.32)
2937/8 (22)8 (203)
3.22 (1.46)
27791/2 (241)2.29 (1.04)
No.Length In. (mm)
Pkg. Wt. Lb. (kg)
Moil Point • Std. Pkg. 1 Ripper • Std. Pkg. 1 29610 (254)
2.29 (1.04)
29712 (305)
2.92 (1.32)
297-1818 (457)
4.36 (1.98)
29591/2 (241)2.42 (1.10)
AJX
022
AJX
023
AJX
024
AJX
025
No. 1190R*For use with tool
furnished with round collar.
* Must be removedfrom hammer bar-rel to change tools.
No. 1190* For usewhere
frequent change oftools is not required.
ARR
001
For Use WithType 1190/1190R No.
Type 1191/1192 No.
CP-V21.819T1.819T
Baby Supr.1.6921.692
1-Boyer1.9421.942
2-Boyer1.9421.942
3-Boyer1.9421.942
4-Boyer1.9421.942
For Use WithType 1190/1190R No.
Type 1191/1192 No.
9362CPT-1CPT-3
9363CPT-1CPT-3
9364CPT-1CPT-3
81X 11X 4112.067
–
Baby Superior (CP4114 PUBA)Chipping Hammer
Rivet Busters (4181)CementChipperChipping Hammer (CP9362)
For Use WithType 1190/1190R No.
Type 1191/1192 No.
0-RVCPT-2CPT-4
1-RVCPT-2CPT-4
2-RVCPT-2CPT-4
3-RVCPT-2CPT-4
4-RVCPT-2CPT-4
0CPT-1CPT-3
1CPT-1CPT-3
2ACPT-1CPT-3
3CPT-1CPT-3
4CPT-1CPT-3
Ring Valve Chippers (CP 4234) Simplate Chippers (CP 4123)
Use 2190 RetainerUse 2190 Retainer
Retainers Chicago Pneumatic Std. Pkg. 1
ARR
002
ARR
003
ARR
004
No. 1192 For instantchange of
tools on productionwork. Not necessaryto remove retainerfrom hammer barrel,or to lift flat spring, tochange tools. Toolchanged by pushingupward into hammer.Tool is removedthrough bottom ofretainer.
No. 1191 Use wherefrequent tool
change is necessary.Not necessary toremove retainer fromhammer barrel tochange tools. Toolchanged quickly bylifting end of flatspring on outside ofretainer to release lockpin and rotating toolone-quarter turn.
Ingersoll RandFor Use With
Type 1190/1190R No.Type 1191/1192 No.
K2L (Old)1.7081.708
K2L (New)1.6551.655
N11.880T1.800T
000-10002.0052.005
1IRC-1IRC-2
2-200IRC-1IRC-2
For Use WithType 1190/1190R No.
Type 1191/1192 No.
2AIRC-1IRC-2
3-300IRC-1IRC-2
3AIRC-1IRC-2
4-400IRC-1IRC-2
C1IRC-3IRC-4
C2IRC-3IRC-4
C3IRC-3IRC-4
C22IRC-5IRC-6
W1–
1198
W2–
1198
W3–
1198
W4–
1198
JC-1FTC-1FTC-2
–
JC-2FTC-1FTC-2
–
JC-3FTC-1FTC-2
–
JC-4FTC-1FTC-2
–
Thor
Jet
For Use WithType 1190/1190R No.
Type 1191/1192 No.
NNL1.6551.655
0011.6551.655
001L1.6551.655
1CH1.9421.942
2CH1.9421.942
3CH, 4CH1.9421.942
For Use WithType 1190/1190R No.
Type 1191/1192 No.
1F1.942T1.942T
21.942T1.942T
2F1.942T1.942T
2TCH1.9421.942
3TCH1.9421.942
4TCH1.9421.942
For Use WithType 1190/1190R No.
Type 1191/1192 No.Type 190 No.
Chipping Hammers
Chipping Hammers
Chipping Hammers
Chipping Hammers
Chipping Hammers Rivet Hammers
Rivet Buster RB90–––
190-2.400 Standard steel2190-2.400 Jumbo steel
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS60
ARR
005
ARR
006
ARR
007
Atlas Copco - U.S.A.
RRC-22ATC-3ATC-4
RRC-33ATC-3ATC-4
RRC-63ATC-3ATC-4
RRC-73ATC-3ATC-4
2DAATC-5ATC-6
2DDATC-5ATC-6
3DAATC-5ATC-6
3DDATC-5ATC-6
4DAATC-5ATC-6
4DDATC-5ATC-6
Cleco
For Use WithType 1190/1190R No.
Type 1191/1192 No.
For Use WithType 1190/1190R No.
Type 1191/1192 No.
For Use WithType 1190/1190R No.
Type 1191/1192 No.
For Use WithType 1190/1190R No.
Type 1191/1192 No.
OW-BD1.5681.568
2-WAMCLE-1CLE-2
3-WAMCLE-1CLE-2
C-20CLE-3CLE-4
C-20B1.9421.492
C-30CLE-3CLE-4
C-30B1.9421.942
1-WM1.9421.942
2-WM1.9421.942
3-WM1.9421.942
Sullair Corp.
For Use WithType 1190/1190R No.
Type 1191/1192 No.
SCH-2FTC-1FTC-2
SCH-3FTC-1FTC-2
SCH-4FTC-1FTC-2
MCH-2SUL-1SUL-2
MCH-3SUL-1SUL-2
MCH-4SUL-1SUL-2
Chipping Hammers
Chipping Hammers
Chipping Hammers
Chipping Hammers
Chipping Hammers
For Use WithType 1190/1190R No.
Type 1191/1192 No.
Type 190 No.
A90–
190-2.400 Std. steel2190-2.400 Jumbo steel
B90––
2190-2.400
SRB-11––
2190
Rivet Busters
Other manufacturers types available, contact sales for more information.
* Must be removedfrom hammer barrel
to change tools.
No. 1195*
No. 1198* Specially for
chipping hammers with
threaded barrel.
No. 2190*Used with
No. 81X or No.11XRivet Buster.
Retainers (continued)
Die Grinders • Std. Pkg. 1Compact and lightweight • Lever throttle for feathering control. Rib textured handle provides firm grip.
AP
001
Grinders & Sander
No.Collet Size In.
Free Speed RPM Length In.
CFMPkg. Wt. Lb. (kg)
No.Disc Capacity In.Free Speed RPM
Length In.CFM
Pkg. Wt. Lb. (kg)
2201/4
22,00053/4
41.25 (.57)
200AH1/4
20,00047/8
31 (.45)
4" Angle Grinder • Std. Pkg. 1Safety throttle lever.• Guard.• Lightweight.• Side handle.
1/4" Heavy-Duty 1/4" Angle Head
250LG4
11,000910
4.5 (2.04)
Astro Pneumatic
Don’t forget to check the
MRO & Contractor Suppliessection of this catalog to find
just the right hoses and
fittings for your application.
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
61Deck Scalers
No.Cleaning Width In.
Power SupplyHorsepower
Pkg. Wt. Lb. (kg)
K7–1 5"
115 Volt1/8
9 (4.08)
K7–2 5"
230 Volt1/8
9 (4.08)
KP5 5"Air1/2
7 (3.18)
K7–1E8"
115 Volt1/8
11 (4.99)
K7–2E 8"
230 Volt1/8
11 (4.99)
KP5E 8"Air1/2
9 (4.08)
ElectricAvailable in 115 and 230 Volt models with AC/DC, 50/60 universal motors. 15 Feet of three-conductor cable included.
PneumaticRotary type air motors, free from toggles, pistons, or reciprocating parts to eliminate vibration. Operating range; 70-100 / 32-42.
Nos. ME5, 2ME5 and MPE6 • Furnished with a 48 Inch detachable aluminum handle allowing one man to operate thetool with speed and ease over large flat areas. This handle isavailable as an option on Nos. M5, 2M5 & MP6.
AUR • Models are available in gas and electric models (115/230 V)*. A vacuum / dust collector is available on the electric model No. W1EV.
No.Cleaning Width In.
Power SupplyHorsepower
Pkg. Wt. Lb. (kg)
WIG5"
Gas5
90 (40.82)
W1E5"
115/230 Volt2
97 (44)
W1EV*5"
115/230 Volt2
115 (52.16)
No.Cleaning Width In.
Power SupplyHorsepower
Pkg. Wt. Lb. (kg)
M5–18"
115 Volt1/2
21 (9.53)
M5–28"
230 Volt1/2
21 (9.53)
MP68"Air21/2
17 (7.71)
M5–1E12"
115 Volt1/2
27 (12.25)
M5–2E12"
230 Volt1/2
27 (12.25)
MP6E12"Air21/2
24 (10.89)
No.Set No.
Used with ModelsPkg. Wt. Lb. (kg)
6742
K7 & 2K73 (1.36)
674E4
KE7 & 2KE76 (2.72)
90M2
M5 & 2M551/2 (2.49)
90ME4
ME5 & 2ME511 (4.99)
No.Set of
Used with ModelsPkg. Wt. Lb. (kg)
Cutter Bundles • Std. Pkg. 1
Wire Brushes • Std. Pkg. 1
AU
001
AU
002
AU
003
BDR
001
Bench Grinders and Buffers
No.Description
HPVolt
Phase/Hz.Pkg. Wt. Lb. (kg)
612Grinder
1/31151/60
29 (13.15)
662Grinder Buffer
1/31151/60
28 (12.70)
6-Inch Multi-Purpose Grinders and Buffers • Std. Pkg. 1 • Two-piece tool rest permits vertical and horizontal adjustments – can betilted for angle grinding. UL Listed/CSA Certified. Designed to comply with OSHA standards under normal usage. Includes 36 and 60grit 6" x 3/4" x 1/2" wheels, guard on both sides. Grinder-buffers have wire wheel on right side. Supplied with 8-Foot, 3-conductorcord • 3600 RPM.
674WE8
KE & KPE4 (1.81)
23W10
M & MP11/2 (.68)
23WE20
ME & MPE3 (1.36)
674W4
K & KP21 (9.53)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS62
BDR
003
BDR
004
BDR
005
No.HP
RPMVolt
Phase/Hz.Pkg. Wt. Lb. (kg)
*8100W3/4
1800115/230
1/6099 (44.91)
*8107W3/4
3600115/230
1/60100 (45.36)
8102W3/4
1800208-230/460
3/6097 (44.00)
8123W3/4
3600208- 230/460
3/6098 (44.45)
8-Inch Heavy-Duty Industrial Grinders • Std. Pkg. 1 • Single-phase units feature Baldor permanent split capacitor motor – won’tburn out even if repeatedly overloaded. Designed for heavy-duty tool grinding and production work. Includes 36 and 60 grit 8" x 1"x 3/4" wheels. UL Listed/CSA Certified. (*Not CSA Certified). Designed to comply with OSHA standards under normal usage.
Exhaust guards accommodate 3" vent pipe.
No.HP
VoltPhase/Hz.
Pkg. Wt. Lb. (kg)
*1022W1
115/2301/60
134 (60.78)
1021W11/2
208-230/4603/60
132 (59.88)
105W11/25753/60
132 (59.88)
10-Inch Industrial Grinders • Std. Pkg. 1 • An ideal grinder for industrial plant or toolroom use. Exhaust guards accommodate 4" vent pipe. Includes 36 and 60 grit 10" x 1" x 7/8" wheels. UL Listed/CSA Certified. (*Not CSA Certified). Designed to comply withOSHA standards under normal usage. Single-phase units have 2-pole switch mounted in base, factory connected 115 Volts.
No switch, cord or plug on 3-phase units • 1800 RPM.
No.HP
VoltPhase/ Hz.
Pkg. Wt. Lb. (kg)
1215W2
208-230/4603/60
252 (114.31)
1216W3
208-230/4603/60
255 (115.67)
1217W2
115/2301/60
262 (118.84)
129W3
5753/60
254 (115.21)
12-Inch Heavy-Duty Pedestal Grinders • Std. Pkg. 1 • Ideal for jobs requiring powerful, all-purpose grinder. Manual starter, with overload protection, conveniently mounted on grinder. 11/4" diameter shaft. Pedestal, waterpot and tool trays optional. Wheels optional – will accommodate size 12" x 2" x 11/4". Designed to comply withOSHA standards under normal usage. Exhaust guards accommodate 5" vent pipe • 1800 RPM
Bench Grinders and Buffer Eye Shields
GA9 Big 51/2" x 33/4" viewing areamade of shatterproof DuPontLucite-AR®. Accommodates
standard 60-Watt bulb.6 (2.72)
Std. Pkg. 1
GA10 EyeshieldPlexiglass size
5" x 4" fits Baldor 6"
grinders.2 (.91)
GA11 EyeshieldPlexiglass size
6" x 4" fits Baldor
7"-14" grinders 2 (.91)
No.Description
Pkg. Wt. Lb. (kg)
Lighted Eyeshield Eyeshields
BDR
006
Bench Grinders and Buffers (continued)
No.Description
Pkg. Wt. Lb. (kg)
GA16 PedestalFor 6", 7", 8" & 10" grinders
61 (27.67)
GA20 PedestalFor 8", 10", 12" & 14" grinders
128 (58.06)
Bench Grinders and Buffer AccessoriesBDR
007
PedestalsStd. Pkg. 1
BDR
002
No.Description
HPRPMVolt
Phase/Hz. Pkg. Wt. Lb. (kg)
7306Grinder
1/2 1800
115/2301/60
71 (32.21)
*712Grinder
1/2 36001151/60
45 (20.41)
7307Grinder
1/23600
115/2301/60
70 (31.75)
7308Grinder
1/21800
208-230/4603/60
71 (31.75)
7309Grinder
1/23600
208-230/4603/60
71 (31.75)
*762Grinder Buffer
1/236001151/60
42 (19.05)
7351Grinder Buffer
1/23600
115/2301/60
66 (29.90)
7-Inch Industrial Bench Grinders and Buffers • Std. Pkg. 1 • Cast-iron, 2-piece tiltable tool rest forangle grinding. Exhaust guards accommodate 3" vent pipe. Wheels 7" x 1" x 5/8" – guard on both sides.Grinder buffers have wire wheel on right side. UL Listed/CSA Certified. (7306 not CSA Certified.)Designed to comply with OSHA standards under normal usage. Single-phase units supplied with 8-Foot,3-conductor cord with 3-prong plug. No switch, cord or plug on 3-phase units.
*Supplied with pressed steel tool rests and non-exhaust wheel guards. All other units supplied with cast-iron tool rests.
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
63Electric Hammer Tools
B&L
001
Moil Point Flat Chisel
Moil Point Flat Chisel
Scaling Chisel
No.Overall Lgth. In.
Blade Size In.Pkg. Wt. Lb. (kg)
D2202612
11/21.5 (0.68)
D22028122
1.8 (0.79)
D2203012
21/22 (0.91)
D22032123
2 (0.91)
D2110010–
2.5 (1.13)
D2101212–
1.5 (0.68)
D2101818–
2.5 (1.02)
D22012127/8
1.5 (0.68)
D22018187/8
2.5 (1.02)
Demolition Hammer
D1101212–
1.5 (0.68)
D1102020–
2.8 (1.25)
D12012127/8
1.5 (0.68)
D1202020–
2.8 (1.25)
D1020016
41/24 (1.81)
D1202612
11/21.5 (0.68)
D12028122
1.8 (0.79)
D1203012
21/22 (0.91)
D12032123
2 (0.91)
D1110010–
2.5 (1.13)
D10500165
3.5 (1.59)
Electric Breaker
No.Overall Lgth. In.
Blade Size In.Pkg. Wt. Lb. (kg)
No.Overall Lgth. In.
Blade Size In.Pkg. Wt. Lb. (kg)
No.Overall Lgth. In.
Blade Size In.Pkg. Wt. Lb. (kg)
No.Overall Lgth. In.
Blade Size In.Pkg. Wt. Lb. (kg)
Moil Point Flat Chisel Scaling Chisel Asphalt Cutter Clay Spade
D3102020–
6 (2.72)
D3202020–
6 (2.72)
D33020203
6.25 (2.84)
D30500165
8.25 (3.74)
D303001651/2
10 (4.54)
Rotary HammerC-P: PHD26, PH38, PHD38D • Black & Decker: Macho I, II, III • Bosch: 11202, 11203, 11205, 11209, 11306Metabo: 1129, RH99, RH99X • Milwaukee: 5343, 5347
Demolition HammerBosch: 11302, 11305, 11311• Hitachi: H55SC • Kango: 900S
Electric BreakerBlack & Decker: 5027 • Bosch: 11304, Brute • Hitachi: H85, H90SB, H65 • Kango: 2500The electric Breaker uses the standard 11/8" Hex x 6" Paving Breaker Shank. All electric breaker points, chisels, andscaling chisels, have a 201/2" overall length.
Std. Pkg. 1 • For the following Electric Hammer Tools:
Rotary Hammer
Moil Point Flat Chisel Scaling Chisel Bushing Tool Asphalt Tool Clay Spade
Scaling Chisel Bushing Tool
Clay Spade
Bushing Tool Asphalt Cutter
For a complete selection of electric
rotary hammers, see the Power Toolssection of this catalog or just give one
of our knowledgeable sales staff a call.
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS64Hydraulic Hammer Accessories
B&L
002
No.
Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
No.
Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)No.
Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
No.
Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
No.Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FA02( )24Rapid Ram
33 / 35023/424
653305653306
34 (15.43)
FA03( )30Hy-Ram
65 / 7531/430––
70 (31.76)
FA04( )32Hy-Ram
77
31/432
657705657706
67 (30.40)
FA04( )37Krupp 200
31/437
657708657709
80 (36.30)
FA06( )33Hy-Ram
88
433
658810658806
105 (47.64)
FA06( )39Krupp 600
439
658804658808
126 (57.17)
FA11( )18Hy-Ram
700
13/418
67701567701611 (4.99)
FA11( )18Krupp
50 / 5513/418––
11 (4.99)
Accessories for: Allied • Contech • Hughes • Impulse • Ingersoll Rand • IndecoStd. Pkg. 1 • Fill in ( ) in No. with: B = Blunt • P = Point • X = Chisel • C = In-Line ChiselAdditional models and lengths are available upon request.
FA13( )18Hy-Ram
710 / 710B/ 71123/1618
677108677017
19 (8.62)
FA13( )24Krupp
65 / 7023/1624––
25 (11.34)
FA18( )28Hy-Ram
715
21/228––
36 (16.33)
FA19( )28Krupp 130
/ 13521/228––
36 (16.33)
FA12( )24Hy-Ram
720
23/424
667205667206
33 (14.97)
FA12( )24Krupp 100/ 11023/424––
33 (14.97)
FA22( )32Hy-Ram
730
31/432
657315657316
61 (27.68)
FA22( )36Krupp 300
/ 13031/436
657310657518
70 (31.76)FA24( )33Hy-Ram
740
433
657415657416
96 (43.56)
FA24( )39Krupp 550 /560c
439
657420657418
120 (54.45)
FA14( )39Hy-Ram
750
41/239
667505667506
150 (68.06)
FA14( )45Krupp 700 /70141/245
667510667508
176 (79.85)
FA15( )39Hy-Ram 750B /750CS
41/239
657515657516
150 (68.06)
FA15( )45Krupp
711 / 712 /720CS
41/245
657520657513
176 (79.85)
FA16( )44Hy-Ram
770
51/444
659305659306
240 (108.89)
FA16( )49Krupp 900
51/449
659307659308
270 (122.5)
FA17( )44Hy-Ram
770B / 770CS
51/444
659905659906
235 (106.62)
FA17( )49Krupp 950
51/449
659907659908
265 (120.24)
FA28( )46Hy-Ram
780 / 780CS/ 785CS
57/846
677805677804
295 (133.85)
FA28( )46Krupp 1300
57/846––
295 (133.85)
FA08( )32Ho-Ram
250
31/232
634005634006
76 (34.48)
FA26( )31Ho-Ram
300
31/231
634305634306
75 (34.03)
FA20( )29Ho-Ram 7000B
429
617405617406
101 (45.83)
FA20( )36Ho-Ram7000B
436––
118 (53.54)
Allied
Contech
FF10( )27Mini-Ram
12521/227––
32 (14.52)
FF04( )36Large-Ram
200336
730-111730-331
72 (32.67)
FF06( )27HD-3
21/227
370-124370-125
35 (15.88)
FF06( )33HD-3
21/233
370-530370-531
42 (19.06)
FF08( )32HD-6
31/232
507-359507-360
85 (38.57)
FG02( )20Impactor
100017/820––
15 (6.81)
FR02( )23360V
/ Esco 3021/223
361-37361-38
28 (12.70)
Hughes Impulse
No.
Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
Ingersoll-Rand
FJ04( )26ABM 500326––
40 (18.15)
FJ06( )30ABM 100017/830––
95 (43.10)
FU62( )26MES621
3.11526––
53 (24.05)
FU15( )36MES 15004.336––
120 (54.45)
FU25( )42MES 25005.1142––
283 (128.40)
FU50( )52MES 50006.228
52––
444 (201.45)
Indeco
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
65Hydraulic Hammer Accessories (continued)
Accessories for: Izumi • Furukawa-Kent • NPKStd. Pkg. 1 • Fill in ( ) in No. with: B = Blunt • P = Point • X = Chisel • C = In-Line ChiselAdditional models and lengths are available upon request.
No.Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FY15( )20HH150
220––
17 (7.71)
FY30( )24HH300
2.424––
25 (11.34)
FY50( )24HH500
21/224
76197617
27 (12.25)
FY50( )24Izumy / Husky
21/224
67766778
27 (12.25)
Izumi
Furukawa – Kent
No.Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FM04( )23H1XA21/423
110223081102232425 (11.34)
FM06( )30H2XA
2.630
110191141101913032 (14.52)
FM08( )28H3XA
328
110219611102198740 (18.15)
FM10( )30H4XE3.530
110230411102306670 (31.76)
FM11( )36H6XA
3.836
1102031011020336
115 (52.18)
FM12( )36H7X4.236
1102371011023736
120 (54.45)
FM14( )38H8XA
4.638
1102403111024056
172 (78.04)
NPK
No.Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FM16( )43H10XB
543
1102445211024478
190 (86.21)
FM18( )47H12X5.3547
1102496511024981
260 (117.97)
FM22( )50H14X5.550
1101732411017340
275 (124.77)
FM20( )51H16X5.751
1101871011018736
320 (145.19)
FM28( )52H20X6.152
1102263911022654
440 (199.64)
FM30( )61H30X6.761––
565 (256.35)
No.Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FB02( )30KB 555
21/230
25372543
38 (17.24)
FB04( )30KB 555
330
71467383
60 (27.22)
FB06( )30KB 999
31/230
25457529
74 (33.57)
FB06( )36KB 999
31/236
75297533
90 (40.83)
FB06( )48KB 999
31/248
1016310161
122 (55.35)
FB08( )48KB 2000 / 2600
51/448
1026310261
280 (127.04)
No.Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FB10( )19KHB 100
219
1050410502
17 (7.71)
FB12( )24KHB 200
23/424––
40 (18.15)
FB14( )32KHB 400
33/432
1077610775
100 (45.37)
FB14( )32KHB 400
33/432
1112911128
100 (45.37)
FB16( )36KHB 700
41/436
1159111590
144 (65.34)
FB18( )42KHB 1000
51/442––
250 (113.43)
No.Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FB20( )48KHB 1500
51/248
1222312221
315 (142.92)
FB01( )16KHB 1G
1.416
1069410695
315 (142.92)
FB23( )18KHB 2G
21/418
1054710548
20 (9.07)
FB25( )23KHB 3G
21/223
1103611037
32 (14.52)
FB30( )25KHB 5G
325
1093610937
50 (22.69)
FB35( )29KHB 8G
31/229
1123611237
79 (35.84)
No.Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FB38( )40KHB 10G
4.13440
1173611737
200 (90.74)
FB40( )43KHB 15G
411/1643
1133611337
240 (108.89)
FB45( )48KHB 20G
51/448
1143611437
323 (146.55)
FB31( )51KHB 30G
53/451
1250112502
365 (165.61)
FB41( )52KHB 40G
61/452––
442 (200.54)
FB50( )60KHB 50G
760––
663 (300.82)
B&L
003
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS66Hydraulic Hammer Accessories (continued)
Accessories for: Teisaku / Okada • Rammer • Stanley / MelroeStd. Pkg. 1 • Fill in ( ) in No. with: B = Blunt • P = Point • X = Chisel • C = In-Line ChiselAdditional models and lengths are available upon request.
Teisaku / Okada
FS10( )51G 100
6.651103101
500 (226.86)
FS22( )21S 20 / S 22 /
ROX 10025/821––
18 (8.17)
FS21( )19S 21
13/419––
12 (5.44)
FS23( )26S 23
231/64
26233231
35 (15.88)
FS24( )29S 24
253/64
29243241
50 (22.69)
FS25( )29S 25
23/429253251
45 (20.42)
FS26( )33S 26
335/64
33263261
88 (39.93)
Rammer
FN01( )17MB-125 /
Melroe1250
13/417
1407014139
11 (4.99)
FL02( )22MB-250 /256 / 350(Melroe2500)21/222
502201502202
27 (12.25)
FL04( )28MB-550(Melroe5500)
23/428
1049709762
42 (19.1)
FN07( )28MB-675
328
1465214687
50 (22.69)
FN28( )30MB-800
/ 875
31/830
507200507201
115 (52.18)
FN08( )36MB-1200 / 1200c
436
1165511654
170 (77.13)
FN10( )41MB-1850
41/241
1165811657
213 (96.64)
FN12( )41MB-2850 /
2900
51/841
1261612615
337 (152.9)
FN18( )49MB-3900
/ 3950
51/249––
360 (163.4)
Stanley / Melroe
No.
Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FS86( )52S 41
/ S 86611/16
52863861
528 (239.56)
FS52( )36S 52
/ ROX 700421/64
36523521
156 (70.78)
FS54( )41S 54
417/32
41543541
184 (83.48)
FS56( )41S 56
57/64
41563561
240 (108.89)
FS82( )47S 82
51/247823821
313 (142.01)
FS84( )52S 84
619/64
52843841
459 (208.26)
FS68( )43S-68
51/443––
199 (90.29)
No.Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FP02( )21UB 21.621
2X500PRX550RX18 (8.17)
FP04( )28UB 42.628
4XA2710P4XA2710FX37 (16.79)
FP06( )31UB 5
331
5X790P5X790FX60 (27.22)
FP08( )35UB 8
435
8X900P8X900FX
112 (50.82)
FP10( )44UB 11
4.844
11X1100P11X1100FX175 (79.40)
FP12( )47UB 14
5.347
14X1200P14X1200FX225 (102.08)
FP14( )48UB 17
5.548
17X1300P17XZ1300FX275 (124.77)
No.Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FP21( )20UB 301
220
301X500P301X500FX
17 (7.71)
FP40( )22UB 301SC
2.1522––
24 (10.89)
FP22( )22UB 302
2.422
302X550P302X550FX28 (12.70)
FP41( )24UB 302A
2.3924––
32 (14.52)
FP23( )28UB 303
2.728
303X700P303X700FX46 (20.87)
FP24( )28UB 304
2.928
304X700P304X700FX56 (25.41)
FP34( )30UB 304B
2.930––
60 (27.22)
FP25( )36UB 305
31/236
305X900P305X900FX71 (32.21)
No.Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FP26( )32UB 306
3.3532
306X800P306X800FX80 (36.30)
FP28( )39UB 308
4.339
308X1000P308X1000FX
98 (44.47)
FP30( )43UB 310
4.843
310X1100P310X1100FX216 (98.00)
FP32( )45UB 312
5.145
312X1150P312X1100FX262 (118.87)
FP36( )51UB 316
5.551––
288 (130.67)
FP38( )52UB 318
6.2552
318X1400P318X1400FX509 (230.94)
FP44( )62UB 324
5.9062.2
––
482 (218.69)
No.
Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
No.
Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
B&L
004
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
67
Accessories for: Teledyne / Roxon / Toku • Tramac / MontabertStd. Pkg. 1 • Fill in ( ) in No. with: B = Blunt • P = Point • X = Chisel • C = In-Line ChiselAdditional models and lengths are available upon request.
No.
Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FE16( )22TR 100
21/16
22100K0P1100K0P416 (7.26)
FE02( )29TR 200
329
200K0P1200K0P450 (22.69)
FE04( )33TR 400
31/233
400K0P1400K0P477 (34.94)
FE06( )36TR 602M
/ 602X436
545.0136545.0137
115 (52.18)
FE08( )36TR 700 /
700X4.336
545.0166545.0167
121 (54.90)
FE10( )40TR 800 / 800X
51/240
800K0P1800K0P4
245 (111.16)
FQ10( )12TB 100
212––
10 (4.54)
No.
Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FQ12( )20TB 120 / 125
220
TB120M-525TB120C-525
17 (7.71)
FQ18( )24TB 180 / 22521/424
TB180M-590TB180C-62426 (11.80)
FQ22( )30TB 220 / 325
330
TB220M-760TB220C-76060 (27.22)
FQ40( )32TB 400 / 400X
/ 425 / 425X33/432
TB400M-800TB400C-85096 (43.56)
FQ72( )36TB 700 / 700X / 725 / 725X
41/236
TB700M-930TB700C-850162 (73.50)
FQ90( )52TB 900 / 95053/852
TB900M-1170TB900C-1263275 (124.77)
FQ130( )48TB 1300
53/448
TB1300M-1180TB1300C-1265352 (159.71)
FC04( )20BRH 40
13/420
4647246474
11 (4.99)
FC16( )23BRH 75 / 76 /
85 / 9 0 / 95 / 100
21/223
5548855490
25 (11.34)
FC16( )32BRH 75 / 76 /
85 / 90/ 95 / 100
21/232
55489–
40 (18.15)
FC06( )26BRH 125
31/826
3648136482
43 (19.51)
FC06( )32BRH 125
31/832
36554218027
60 (27.22)
FC06( )37BRH 125
31/837––
78 (35.39)
FC06( )48BRH 125
31/848––
102 (46.28)
No.
Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FC08( )35BRH 250/ 400 / 450
33/435
2398723990
82 (37.21)
FC08( )39BRH 250
/ 400 / 45033/439
2398823999
94 (42.65)
FC08( )47BRH 250
/ 400 / 45033/447––
113 (51.27)
FC10( )39BRH 501
41/239
2613226136
158 (71.69)
FC18( )39BRH 620
41/239
6229962301
158 (71.69)
FC11( )39BRH 625
4.6439
7850978511
175 (79.40)
FC12( )44BRH 750
43/444
5766457665
180 (81.67)
No.Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
No.Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
FC12( )59BRH 750
43/459
57669–
241 (109.35)
FC13( )48BRH 1000
5.8648––
370 (167.88)
FC14( )52BRH 1100
5.352
5183651837
300 (136.12)
FC15( )20BRP 60 / 70
21/420
8362783625
16 (7.26)
FC07( )24BRP 95 / 100
23/424
8758389080
27 (12.25)
FC09( )28BRP 130 / 150
31/428
8557885582
49 (22.23)
FC20( )43BRV 32 / 950
543
7385973861
220 (99.82)
FC20( )50BRV 32 / 950
550
7386073862
261 (118.42)
FC22( )52BRV 52
63/452
8427282140
464 (210.53)
FC02( )28Z-9623/828
17552–
32 (14.52)
FC02( )36Z-9623/836––
40 (18.15)
FC23( )49BRV 53
6.749––
475 (215.52)
FC43( )49BRV 42 / 43
5.949––
380 (172.41)
Tramac / Montabert
B&L
005
Hydraulic Hammer Accessories (continued)
No.
Hammer
Approx. Dia. In.Overall Lgth. In.
Mfg. No. PointMfg. No. Chisel
Pkg. Wt. Lb. (kg)
Teledyne / Roxon / Toku
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS68
B&L
006
Standard 80x Rivet Buster Tools • Std. Pkg. 1
L21A099
1.5 (0.68)
L21A1212
2 (.91)
L21A1818
3.25 (1.47)
L22A099
1.5 (.68)
L22A1212
2 (.91)
L22A1818
3.25 (1.47)
L23A099
1.5 (.68)
L23A1212
2 (.91)
L23A1818
3.25 (1.47)
No.Length In.
Pkg. Wt. Lb. (kg)
Point Chisel Side Cut Chisel
Back Out Punches • Std. Pkg. 1 • Length 9" • Standard clearance is 11/2" • Longer lengths available upon request.
No.Rivet Size In.
Pkg. Wt. Lb. (kg)
No.Rivet Size In.
Pkg. Wt. Lb. (kg)
L24A093/8
1.5 (0.68)
L25A091/2
1.5 (0.68)
L27A093/4
1.5 (0.68)
L28A097/8
1.5 (0.68)
L24B103/8
2 (.91)
L25B101/2
2 (.91)
L27B103/4
2 (.91)
L28B107/8
2 (.91)
Jumbo Heat Exchanger Back Out Punches • Std. Pkg. 1 • Other lengths and tube sizes available, 25 piece minimum order per size.
No.Clearance In.Tube Size In.Tube Gauge
Pkg. Wt. Lb. (kg)
LF046F4
3/412
1.75 (0.79)
LF046F4114
1.75 (0.79)
LF046F6
3/412
2 (0.91)
LF046F6
3/414
2 (0.91)
LF046F6112
2.25 (1.02)
LF046F8
3/412
2.25 (1.02)
LF046F8
3/414
2.25 (1.02)
Rivet Buster Tools
L21B1010
2 (.91)
L21B1212
2.5 (1.13)
L21B1818
3.75 (1.7)
L22B1010
2 (.91)
L22B1212
2.5 (1.13)
L22B1818
3.75 (1.7)
L23B1010
2 (.91)
L23B1212
2.5 (1.13)
L23B1818
3.75 (1.7)
No.Length In.
Pkg. Wt. Lb. (kg)
Point Chisel Side Cut Chisel
Jumbo 11x Rivet Buster Tools • Std. Pkg. 1
Back Out Punches • Std. Pkg. 1 • Length 9" • Standard clearance is 11/2" • Longer lengths available upon request.
Industrial Air Tool stocksIngersoll Rand andChicago Pneumatic rivetbusters. See their fineproducts in this section!
B&L
007
Hi-Duty Paving Breaker Tools • Std. Pkg. 1
14
A140144.5 (2.04)A15014
4.5 (2.04)A16014
4.5 (2.04)
18
A140185 (2.27)A150185 (2.27)A160185 (2.27)
14
A240144.75 (2.16)
A250144.75 (2.16)
A260145.5 (2.50)
18
A240186 (2.72)A250186 (2.72)A26018
6.5 (2.95)
24
A240248.25 (3.74)
A250248.25 (3.74)
A260248 (3.63)
14
A340146.5 (2.95)A35014
6.5 (2.95)A36014
7.25 (3.29)
18
A340187.75 (3.52)
A350187.75 (3.52)
A360188.5 (3.86)
24
A3402410 (4.54)A3502410 (4.54)A36024
10.75 (4.88)
14
A440148 (3.63)A450148 (3.63)A46014
8.5 (3.86)
18
A440189.25 (4.20)
A450189.25 (4.20)
A4601810 (4.54)
24
A4402412 (5.44)A4502412 (5.44)A4602413 (5.90)
Lgth. Under Collar In.
Moil Point No.Pkg. Wt. Lb. (kg)
Narrow Chisel No.Pkg. Wt. Lb. (kg)
3" Chisel No.Pkg. Wt. Lb. (kg)
Lgth. Under Collar In.
Moil Point No.Pkg. Wt. Lb. (kg)
Narrow Chisel No.Pkg. Wt. Lb. (kg)
3" Chisel No.Pkg. Wt. Lb. (kg)
Shank Size In. 11/8 x 6 11/4 x 6
Shank Size In. 7/8HX x 31/4 1 x 41/4
Moil Point
Narrow Chisel
3" Chisel
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
69
14
A110143.25 (1.47)
A120143.25 (1.47)
A130143.25 (1.47)
18
A110184 (1.81)A120184 (1.81)A13018
4.25 (1.93)
14
A010143.25 (1.47)
A020143.25 (1.47)
A030143.25 (1.59)
18
A010184 (1.81)A020184 (1.81)A03018
4.25 (1.93)
14
A210144.50 (2.04)
A220144.50 (2.04)
A230145 (2.27)
14
A210185.5 (2.50)A22018
5.5 (2.50)A230186 (2.72)
14
A210246.75 (3.06)
A220246.75 (3.06)
A230247.5 (3.40)
14
A210368.75 (3.97)
A220368.75 (3.97)
A2303610.5 (4.76)
14
A2104812.5 (5.67)
A2204812.5 (5.67)
A2304813.5 (6.13)
14
A2106014.5 (6.58)
A2206014.5 (6.58)
A2306016 (7.26)
14
A2107218.75 (8.51)
A2207218.75 (8.51)
A2307219.5 (8.85)
14
A310146 (2.72)A320146 (2.72)A33014
6.75 (3.06)
18
A310187.25 (3.29)
A320187.25 (3.29)
A330188 (3.63)
24
A310249 (4.08)A320249 (4.08)A33024
10.25 (4.65)
36
A3103612.5 (5.67)
A3203612.5 (5.67)
A3303614.75 (6.69)
48
A3104816 (7.26)A3204816 (7.26)A33048
17.5 (7.94)
60
A3106018.5 (8.39)
A3206018.5 (8.39)
A3306020 (9.07)
72
A3107223 (10.44)A32072
23 (10.44)A33072
20.75 (10.78)
14
A410147.25 (3.29)
A420147.25 (3.29)
A430148 (3.63)
18
A410189 (4.08)A420189 (4.08)A43018
9.5 (4.31)
24
A4102411 (4.99)A4202411 (4.99)A43024
12.5 (5.67)
36
A4103615.75 (7.15)
A4203615.75 (7.15)
A4303618 (8.17)
48
A4104820.25 (9.19)
A4204820.25 (9.19)
A4304820.5 (9.30)
60
A4106022.25 (10.10)
A4206022.25 (10.10)
A4306024.75 (11.23)
72
A4107223.75 (10.78)
A4207223.75 (10.78)
A4307229.75 (13.50)
Lgth. Under Collar In.
Moil Point No.Pkg. Wt. Lb. (kg)
Narrow Chisel No.Pkg. Wt. Lb. (kg)
3" Chisel No.Pkg. Wt. Lb. (kg)
Lgth. Under Collar In.
Moil Point No.Pkg. Wt. Lb. (kg)
Narrow Chisel No.Pkg. Wt. Lb. (kg)
3" Chisel No.Pkg. Wt. Lb. (kg)
Lgth. Under Collar In.
Moil Point No.Pkg. Wt. Lb. (kg)
Narrow Chisel No.Pkg. Wt. Lb. (kg)
3" Chisel No.Pkg. Wt. Lb. (kg)
Paving Breaker Tools
Shank Size In. 11/8 x 6
Shank Size In. 11/8 x 6 11/4 x 6
Shank Size In. 11/4 x 6
Shank Size In. 1 x 41/4
Standard Paver Breaker Tools • Std. Pkg. 1
Moil Point Narrow Chisel 3" Chisel
Lgth. Under Collar In.
Moil Point No.Pkg. Wt. Lb. (kg)
Narrow Chisel No.Pkg. Wt. Lb. (kg)
3" Chisel No.Pkg. Wt. Lb. (kg)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS70
No.Shank Size In.
Length Under Collar In.Blade In.
Pkg. Wt. Lb. (kg)
B106007/8 x 31/4
171/43 x 10
6.5 (2.95)
B206001 x 41/4171/43 x 10
7.5 (3.40)
B3060011/8 x 6161/23 x 12
8.75 (3.97)
B4060011/4 x 6161/23 x 12
10.5 (4.76)
No.Shank Size In.
Blade In.Pkg. Wt. Lb. (kg)
B209001 x 41/421/8 x 5
6.5 (2.95)
B3090011/8 x 621/8 x 57 (3.18)
B4090011/4 x 621/8 x 5
7.5 (3.40)
No.Shank Size In.
Blade In.Pkg. Wt. Lb. (kg)
B107007/8 x 31/417/8 x 128.5 (3.86)
B207001 x 41/417/8 x 129 (4.08)
B3070011/8 x 62 x 12
10.5 (4.76)
B4070011/4 x 62 x 12
10.75 (4.88)
No.Shank Size In.
Blade In.Pkg. Wt. Lb. (kg)
B210001 x 41/43 x 7
6 (2.72)
B3100011/8 x 63 x 7
7.25 (3.29)
B4100011/4 x 63 x 7
7.25 (3.40)
No.Shank Size In.
Blade In.Pkg. Wt. Lb. (kg)
B105007/8 x 31/4
5 x 65.5 (2.50)
B005007/8 x 41/4
5 x 65.75 (2.61)
B205001 x 41/4
5 x 66.5 (2.95)
B3050011/8 x 6
5 x 68.5 (3.86)
B4050011/4 x 6
5 x 69 (4.08)
No.Shank Size In.
Pkg. Wt. Lb. (kg)
B200351 x 41/4
7.25 (3.29)
B3003511/8 x 6
7.75 (3.52)
B4003511/4 x 6
8.75 (3.97)
No.Shank Size In.
Length U.C. In.Pkg. Wt. Lb. (kg)
B711007/8 x 23/4
126 (2.72)
B111007/8 x 31/4
126 (2.72)
B211001 x 41/4
95.25 (2.38)
B3110011/8 x 6
97 (3.18)
B4110011/4 x 6
97.5 (3.40)
No.Shank Size In.
Pkg. Wt. Lb. (kg)
No.Shank Size In.
Pkg. Wt. Lb. (kg)
A9000811/8 x 67 (3.18)
A9000911/4 x 6
8.5 (3.86)
B108007/8 x 31/4
8.75 (3.97)
B208001 x 41/410 (4.54)
B3080011/8 x 611 (4.99)
B4080011/4 x 6
11.75 (5.33)
No.Shank Size In.
Blade In.Pkg. Wt. Lb. (kg)
B502003/4 x 23/4
41/27 (3.18)
B702007/8 x 23/4
41/27 (3.18)
B102007/8 x 31/4
41/27.25 (3.29)
B202001 x 41/4
41/27.25 (3.29)
B3020011/8 x 6
41/210 (4.54)
B4020011/4 x 6
41/210.5 (4.76)
No.Shank Size In.
Blade In.Pkg. Wt. Lb. (kg)
B503003/4 x 23/4
51/27 (3.18)
B703007/8 x 23/4
51/27 (3.18)
B103007/8 x 31/4
51/27.25 (3.29)
B003007/8 x 41/4
51/27.25 (3.29)
B203001 x 41/4
51/27.25 (3.29)
B3030011/8 x 6
51/210 (4.54)
B4030011/4 x 6
51/210.5 (4.76)
B3040011/8 x 6
813.5 (6.13)
B4040011/4 x 6
814 (6.35)
No.Shank Size In.
Pkg. Wt. Lb. (kg)
B112007/8 x 31/44.5 (2.04)
B012007/8 x 41/44.5 (2.04)
B212001 x 41/4
5.25 (2.38)
B3120011/8 x 6
6.75 (3.1)
B4120011/4 x 6
7.25 (3.29)
No.Shank SIze In.
Pipe Size Pipe To Be Driven In.Pkg. Wt. Lb. (kg)
B218591 x 41/4
3/46 (2.72)
B218611 x 41/41 – 2
6 (2.72)
B3186111/8 x 6
1 – 214 (6.35)
B3186311/8 x 611/4 – 2 14 (6.35)
B4186311/4 x 611/4 – 2 15 (6.81)
B4186511/4 x 611/2 – 2
15 (6.81)
Pipe Driver • Std. Pkg. 1 • Larger drivers are twopiece set.
Clay Spade • Std. Pkg. 1 • 161/2" Under collar.
Asphalt Cutter Std. Pkg. 1 • 11" Under collar.
Brick Removing • Std. Pkg. 1 • 111/2" Under collar.
Frost Wedge • Std. Pkg. 1 • 171/2" Under collar.
Asphalt Wedge • Std. Pkg. 1 • 12" Under collar.
Keen Kuts • Std. Pkg. 1 • 16" Under collar.
Concrete Buster • Std. Pkg. 1 • 141/2" Under collar.
Detachable Shank • Std. Pkg. 1 • 9" Under collar.
Bushing Tool • Std. Pkg. 1 • Face Size 2" x 2"
Tarmac Cutter • Std. Pkg. 1 • 41/2" Blade • 101/2" Under collar.
Digging Chisel • Std. Pkg. 1
Bladed Breaker Tools
B&L
008
B&L
009
B&L
010
B&L
011
B&L
012
B&L
013
B&L
014
B&L
015
B&L016
B&L017
B&L018
B&L019
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
71
B&L025
Sheathing Driver Shoe • Std. Pkg. 1 Shoes for use with wood sheathing only.
No.Shank Size In.Hole Size In.
UnitPkg. Wt. Lb. (kg)
No.Shank Size In.Hole Size In.
UnitPkg. Wt. Lb. (kg)
No.Pin Size In.
Pkg. Wt. Lb. (kg)
B219835/8
5 (2.27)
B219853/4
5 (2.27)
B219877/8
5 (2.27)
B219891
5 (2.27)
B2199111/4
4.5 (2.04)
B2199311/2
7.75 (3.52)
B2199513/4
7.5 (3.40)
B219972
7 (3.18)
B21999( )21/2
7 (3.18)
No.Pin Size In.
Pkg. Wt. Lb. (kg)
No.Pin Size In.
Pkg. Wt. Lb. (kg)
Dirt Tampers Round and Square Std. Pkg. 1 • Pads only.
No.Inside Dia. In.
Pkg. Wt. Lb. (kg)
B915022
14.5 (6.58)
B915033
16.5 (7.49)
No.Outer Dia. In.
Pkg. Wt. Lb. (kg)
B916077 Round
14.5 (6.58)
B916066 Square
12.75 (5.79)
B916088 Square
19.5 (8.85)
B3400611/8 x 6
8.75 (3.97)
B4400611/4 x 6
8.5 (3.86)
Railroad Spike DriverStd. Pkg. 1
Ground Rod Driver • Std. Pkg. 1 • 3" Hold depth.
No.Shank SIze In.
Pkg. Wt. Lb. (kg)
B418507/8 x 31/44 (1.81)
B418511 x 41/4
4.5 (2.04)
B4185211/8 x 66 (2.72)
B4185311/4 x 6
6.75 (3.06)
No.Shank Size In.
Rod Size In.Socket Size In.
Pkg. Wt. Lb. (kg)No.
Shank Size In.Rod Size In.
Socket Size In.Pkg. Wt. Lb. (kg)
B127837/8 x 31/4
5/811/16
4.75 (2.16)
B127857/8 x 31/4
3/413/16
4.5 (2.04)
B227831 x 41/4
5/811/16
5 (2.27)
B227851 x 41/4
3/413/16
4.75 (2.16)
B227871 x 41/4
7/815/16
4.5 (2.04)
B227891 x 41/4
111/16
4.5 (2.04)
32278311/8 x 6
5/811/16
6.5 (2.95)
B3278511/8 x 6
3/413/16
6.5 (2.95)
B3278711/8 x 6
7/815/16
6.25 (2.84)
B3278911/8 x 6
111/16
6.25 (2.84)
B4278311/4 x 6
5/811/16
7.25 (3.29)
B4278511/4 x 6
3/413/16
7.25 (3.29)
B4278711/4 x 6
7/815/16
7 (3.18)
B4278911/4 x 6
111/16
7 (3.18)
Plug and Feathers Std. Pkg. 1 Specify for 11/2" or 2" hole.
Bladed Breaker Tools (continued)
B&L
020
B&L021
B&L022
B&L023
B&L024
B&L026
B9220011/8 x 6
11/2Feathers5 (2.27)
B3210011/8 x 6
2Shank
9.75 (4.42)
B9230011/8 x 6
2Feathers5 (2.27)
B4200011/4 x 6
11/2Shank
9.25 (4.20)
B9220011/4 x 6
11/2Feathers5 (2.27)
B4210011/4 x 6
2Shank
10.5 (4.76)
B9230011/4 x 6
2Feathers
5.5 (2.38)
B220001 x 41/4
11/2Shank
5.25 (2.38)
B922001 x 41/4
11/2Feathers5 (2.27)
B3200011/8 x 6
11/2Shank
9.25 (4.20)
Pin Driver • Std. Pkg. 1 • Specify size rod or pipe to be driven • ( ) = 2 Piece set.
B319835/8
6 (2.72)
B319853/4
6.75 (3.06)
B319877/8
6.5 (2.95)
B319891
6.5 (2.95)
B3199111/4
6 (2.72)
B3199311/2
8.5 (3.86)
B3199513/4
8.25 (3.74)
B319972
8 (3.63)
B31999*21/2
8 (3.63)
B419835/8
7.5 (3.40)
B419853/4
7.5 (3.40)
B419877/8
7.5 (3.40)
B419891
7.25 (3.29)
B4199111/4
7 (3.18)
B4199311/2
9 (4.08)
B4199513/4
8.75 (3.97)
B419972
8.25 (3.74)
B41999*21/2
8.25 (3.74)
Shank Size In. 1 x 41/4
Shank Size In. 11/4 x 6
Shank Size In. 11/8 x 6
Sign Post Driver • Std. Pkg. 1161/4" Under collar Two pieces sold as a set.
No.Shank SIze In.
Pkg. Wt. Lb. (kg)
B&L
027
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS72
Carbon Hollow Drill Steel AccessoriesStd. Pkg. 1
Carbon Hollow Drill Steel
E11012E1
3 (1.36)
E11018E11/2
4 (1.81)
E11024E2
5 (2.27)
E11030E21/2
6 (2.72)
E11036E3
7 (3.18)
E11048E4
9 (4.08)
E11060E5
11 (4.99)
E11072E6
13 (5.90)
Thread E 5/8"
Thread H 1"
No.Under Collar Lgth. In.
Pkg. Wt. Lb. (kg)
E11060H5
11 (4.99)
E11072H6
13 (5.90)
E11096H8
17 (7.71)
E11120H10
21 (9.53)
E11144H12
25 (11.34)
E11168H14
29 (13.16)
No.Under Collar Lgth. In.
Pkg. Wt. Lb. (kg)
E11012H1
3 (1.36)
E11018H11/2
4 (1.81)
E11024H2
5 (2.27)
E11030H21/2
6 (2.72)
E11036H3
7 (3.18)
E11048H4
9 (4.08)
No.Under Collar Lgth. In.
Pkg. Wt. Lb. (kg)
No.Under Collar Lgth. In.
Pkg. Wt. Lb. (kg)
No.Under Collar Lgth. In.
Pkg. Wt. Lb. (kg)
No.Under Collar Lgth. In.
Pkg. Wt. Lb. (kg)
E12012H1
3 (1.36)
E12018H11/2
4 (1.81)
E12024H2
5 (2.27)
E12030H21/2
6 (2.72)
E12036H3
7 (3.18)
E12048H4
9 (4.08)
E12060H5
11 (4.99)
E12072H6
13 (5.90)
E12096H8
17 (7.71)
E12120H10
21 (9.53)
E12144H12
25 (11.34)
E12168H14
29 (13.16)
E23012H1
4 (1.81)
E23018H11/2
5 (2.27)
E23024H2
7 (3.18)
E23030H21/2
8 (3.63)
E23036H3
9 (4.08)
E23048H4
12 (5.44)
E23060H5
14 (6.35)
E23072H6
18 (8.17)
E23096H8
22 (9.98)
E23120H10
27 (12.25)
E23144H12
32 (14.52)
E23168H14
37 (16.79)
E23012D1
5 (2.27)
E23018D11/2
6 (2.72)
E23024D2
8 (3.63)
E23030D21/2
9 (4.08)
E23036D3
10 (4.54)
E23048D4
13 (5.90)
E23060D5
15 (6.81)
E23072D6
19 (8.62)
No.Under Collar Lgth. In.
Pkg. Wt. Lb. (kg)
CCH0000H-Thread coupling
.5 (0.23)
CBH0000H to D adapter
1 (0.45)
Longer length and extension steels available.
Shank Size In. 7/8 x 31/4
No.Under Collar Lgth. In.
Pkg. Wt. Lb. (kg)
Thread H 1"
Thread H 1"
Thread D 13/16"
Shank Size In. 7/8 x 41/4
Shank Size In. 1 x 41/4
No.Under Collar Lgth. In.
Pkg. Wt. Lb. (kg)
Std. Pkg. 1
Std. Pkg. 1
Std. Pkg. 1
Still can’t find what you arelooking for? Contact one of our knowledgeable sales staff.They are available to help you!
B&L
028
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
73Rock Bits
No.Hole Size In.
Item Wt. Lb. (kg)Pkg. Wt. Lb. (kg)
LE2315/16
.13 (.06)7 (2.84)
LE261
.13 (.06)7 (2.84)
LE2811/8
.19 (.09)10 (4.25)
LE3211/8
.19 (.09)10 (4.25)
All Steel Rok-Bits
No.Hole Size In.
Item Wt. Lb. (kg)Pkg. Wt. Lb. (kg)
No.Hole Size In.
Item Wt. Lb. (kg)Pkg. Wt. Lb. (kg)
LH35SH13/8
.32 (.14)16 (7.09)
LH38SH11/2
.38 (.17)19 (8.51)
LH41SH15/8
.63 (.20)22 (9.93)
LH44SH13/4
.5 (.23)25 (11.34)
LH47SH17/8
.5 (.23)25 (11.34)
LH50SH2
.56 (.26)29 (12.76)
LH57SH21/4
.63 (3.06)32 (14.18)
LH63SH21/2
1.06 (.48)54 (24.10)
LH66SH25/8
1.13 (.51)57 (25.52)
No.Hole Size In.
Std. Pkg.Item Wt. Lb. (kg)Pkg. Wt. Lb. (kg)
No.Hole Size In.
Std. Pkg.Item Wt. Lb. (kg)Pkg. Wt. Lb. (kg)
No.Hole Size In.
Std. Pkg.Item Wt. Lb. (kg)Pkg. Wt. Lb. (kg)
No.Hole Size In.
Std. Pkg.Item Wt. Lb. (kg)Pkg. Wt. Lb. (kg)
LD452AH13/450
.5 (.23)25 (11.34)
LD482AH17/850
.81 (.37)41 (18.43)
LD512AH250
.32 (.43)47 (21.27)
LD572AH21/450
1.13 (.51)56 (25.52)
LD642AH21/250
1.81 (.54)59 (26.94)
LD702AH23/430
1.38 (.62)41 (18.72)
LD762AH330
1.5 (.68)45 (20.42)
LD832AH31/430
2 (.91)60 (27.22)
LD892AH31/220
2.56 (1.16)51 (23.3)
LD1012AH420
3.19 (1.5)64 (28.92)
Thread H • Std. Pkg. 50
Thread H
Thread H
Carbide Rok-Bit “Econ” 1/4" Insert
No.Hole Size In.
Item Wt. Lb. (kg)Pkg. Wt. Lb. (kg)
T1207LO13/8
.5 (.23)25 (11.34)
T1507LO11/2
.5 (.23)25 (11.34)
T1607LO15/8
.5 (.23)25 (11.34)
T1707LO13/4
.75 (.34)38 (17.01)
T2007LO2
1 (.45)50 (22.67)
Deep Carbide Rok-Bit 9/16" Carbide Insert
T2007MO250
1 (.45)50 (22.67)
T2207MO21/450
1.25 (.57)63 (28.36)
T2507MO21/250
1.5 (.68)75 (34.01)
T3007MO330
2 (.91)60 (27.22)
T3008MO330
2.75 (1.3)83 (37.4)
T1207MO13/850
.5 (.23)25 (11.34)
T1507MO11/250
.5 (.23)25 (11.34)
T1607MO15/850
.75 (.34)38 (17.01)
T1707MO13/450
.75 (.34)38 (17.01)
T1907MO17/850
.75 (.34)38 (17.01)
Thread E • Std. Pkg. 50
Thread D • Std. Pkg. See Below
Thread D • Std. Pkg. See Below
Thread H • Std. Pkg. 50
Thread D
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS74
Longer Lengths available on blanks, points, narrow chisels, and scaling chisels.
Std. Pkg 1
B&L
029
LengthIn. No.
Pkg. Wt.Lb. (kg) No.
Pkg. Wt.Lb. (kg) No.
Pkg. Wt.Lb. (kg) No.
Pkg. Wt.Lb. (kg)
81/2111/2
912182436486072
912182436486072
91218
91218
91218
9
10
10
L01J08L01J11
L02J09L02J12L02J18L02J24L02J36L02J48L02J60L02J72
L03J09L03J12L03J18L03J24L03J36L03J48L03J60L03J72
L09J09L09J12L09J18
L11J09L11J12L11J18
L12J09L12J12L12J18
L14J09
L07J00
L17J00
1.25 (.57)1.5 (.68)
1.25 (.57)1.5 (.68)2.5 (1.13)3.25 (1.47)
5 (2.27)6 (2.72)8 (3.63)10 (4.54)
1.25 (.57)1.5 (.68)2.5 (1.13)3.25 (1.47)
5 (2.27)6 (2.72)8 (3.63)10 (4.54)
1.25 (.57)1.5 (.68)2.5 (1.13)
1.25 (.57)1.75 (.79)2.75 (1.25)
1.5 (.68)2 (.91)
2.75 (1.25)
1.5 (.68)
2.5 (1.13)
3 (1.36)
L01G08L01G11
L02G09L02G12L02G18L02G24L02G36L02G48L02G60L02G72
L03G09L03G12L03G18L03G24L03G36L03G48L03G60L03G72
L09G09L09G12L09G18
L11G09L11G12L11G18
L12G09L12G12L12G18
L14G09
L07G00
L17G00
1.25 (.57)1.5 (.68)
1.25 (.57)1.5 (.68)2.5 (1.13)3.25 (1.47)
5 (2.27)6 (2.72)8 (3.63)10 (4.54)
1.25 (.57)1.5 (.68)2.5 (1.13)3.25 (1.47)
5 (2.27)6 (2.72)8 (3.63)10 (4.54)
1.25 (.57)1.5 (.68)2.5 (1.13)
1.25 (.57)1.75 (.79)2.75 (1.25)
1.5 (.68)2 (.91)
2.75 (1.25)
1.5 (.68)
2.5 (1.13)
3 (1.36)
L01H08L01H11
L02H09L02H12L02H18L02H24L02H36L02H48L02H60L02H72
L03H09L03H12L03H18L03H24L03H36L03H48L03H60L03H72
L09H09L09H12L09H18
L11H09L11H12L11H18
L12H09L12H12L12H18
L14H09
L07H00
L17H00
1.25 (0.57)1.5 (0.68)
1.25 (0.57)1.5 (0.68)2.5 (1.13)3.25 (1.47)
5 (2.27)6 (2.72)8 (3.63)10 (4.54)
1.25 (.57)1.5 (.68)2.5 (1.13)3.25 (1.47)
5 (2.27)6 (2.72)8 (3.63)10 (4.54)
1.25 (.57)1.5 (.68)2.5 (1.13)
1.25 (.57)1.75 (.79)2.75 (1.25)
1.5 (.68)2 (.91)
2.75 (1.25)
1.5 (.68)
2.5 (1.13)
3 (1.36)
L01F08L01F11
L02F09L02F12L02F18L02F24L02F36L02F48L02F60L02F72
L03F09L03F12L03F18L03F24L03F36L03F48L03F60L03F72
L09F09L09F12L09F18
L11F09L11F12L11F18
L12F09L12F12L12F18
L14F09
L07F00
L17F00
1.25 (0.57)1.5 (0.68)
1.25 (0.57)1.5 (0.68)2.5 (1.13)3.25 (1.47)
5 (2.27)6 (2.72)8 (3.63)10 (4.54)
1.25 (.57)1.5 (.68)2.5 (1.13)3.25 (1.47)
5 (2.27)6 (2.72)8 (3.63)10 (4.54)
1.25 (.57)1.5 (.68)2.5 (1.13)
1.25 (.57)1.75 (.79)2.75 (1.25)
1.5 (.68)2 (.91)
2.75 (1.25)
1.5 (.68)
2.5 (1.13)
3 (1.36)
Round ShankOval Collar
Hex ShankOval Collar
Round ShankRound Collar
Hex ShankRound Collar
Blank
Moil Point
Narrow Chisel
11/2" Chisel
2" Chisel
21/2" Chisel
3" Chisel
All Steel13/4" Sq. Head
Carbide Inserted
Chipping Hammer Tools
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
75
B&L
030
Hole SizeIn.
Hole DepthIn.
SizeC-9
Pkg. Wt.Lb. (kg)
Size 7/8" x 31/4"
Pkg. Wt.Lb. (kg)
Size7/8" x 41/4"
Pkg. Wt.Lb. (kg)
Size1" x 41/4"
Pkg. Wt.Lb. (kg)
1/21/25/85/85/85/85/85/85/83/43/43/43/43/43/43/43/47/87/87/87/87/87/87/87/8111111111
11/811/811/811/811/811/811/811/411/411/411/411/411/411/413/813/813/813/813/813/813/811/211/211/211/211/211/211/2
810.5
6891214182068912141820266891214182026689121418202426891214182026891214182026891214182026891214182026
X90212X90312
–X90116
–X90316
–X90416
––
X90122–
X90319–
X90419–––
X90122–
X90322–
X90422–––
X90125–
X90325–
X90425–
X90625–
X90128–
X90328–
X90428––
X90132–
X90332–
X90432––
X90135–
X90333–
X90435––
X90138–
X90338–
X90438––
.75 (.34)1.0 (.45)
–1.25 (.57)
–1.5 (.68)
–2.0 (.91)
––
1.25 (.57)–
1.75 (.79)–
2.25 (1.02)–––
1.5 (.68)–
2.0 (.91)–
2.75 (1.25)–––
2.0 (.91)–
2.75 (1.25)–
3.5 (1.59)–
4.5 (2.04)–
2.5 (1.13)–
3.25 (1.47)–
4.5 (2.04)––
2.75 (1.25)–
3.25 (1.47)–
4.5 (2.04)––
2.75 (1.25)–
3.25 (1.47)–
4.75 (2.2)––
2.75 (1.25)–
3.5 (1.59)–
4.75 (2.2)––
––
X30216–
X30316–
X30416–
X30616X30219
–X30319
–X30419
–X30619X30819X30222
–X30322
–X30422
–X30622X30822X30225
–X30325
–X30425
–X30625
–X30825
–X30328
–X30428
–X30628X30828
–X30332
–X30432
–X30632X30832
–X30335
–X30435
–X30635X30835
–X30338
–X30438
–X30638X30838
––
2.0 (.91)–
2.5 (1.13)–
3.5 (1.59)–
4.75 (2.2)2.0 (.91)
–2.5 (1.13)
–3.5 (1.59)
–4.5 (2.04)5.5 (2.5)2.0 (.91)
–2.5 (1.13)
–3.5 (1.59)
–4.5 (2.04)5.5 (2.5)2.0 (.91)
–2.5 (1.13)
–3.5 (1.59)
–4.5 (2.04)
–5.5 (2.5)
–2.75 (1.25)
–3.75 (1.7)
–4.75 (2.2)5.75 (2.61)
–2.75 (1.25)
–3.75 (1.7)
–4.75 (2.2)5.75 (2.61)
–3.0 (1.36)
–4.0 (1.81)
–5.0 (2.27)6.0 (2.72)
–2.75 (1.25)
–3.75 (1.7)
–4.75 (2.2)5.75 (2.61)
––
X31216–
X31316–
X31416–
X31616X31219
–X31319
–X31419
–X31619X31819X31222
–X31322
–X31422
–X31622X31822X31225
–X31325
–X31425
–X31425
–X31825
–X31328
–X31428
–X31628X31828
–X31332
–X31432
–X31632X31832
–X31335
–X31432
–X31635X31835
–X31338
–X31438
–X31638X31838
––
2.0 (.91)–
2.5 (1.13)–
3.5 (1.59)–
4.75 (2.2)2.0 (.91)
–2.5 (1.13)
–3.5 (1.59)
–4.5 (2.04)5.5 (2.5)2.0 (.91)
–2.5 (1.13)
–3.5 (1.59)
–4.5 (2.04)5.5 (2.5)2.0 (.91)
–2.5 (1.13)
–3.5 (1.59)
–4.5 (2.04)
–5.5 (2.5)
–2.75 (1.25)
–3.75 (1.7)
–4.75 (2.2)5.75 (2.61)
–2.75 (1.25)
–3.75 (1.7)
–4.75 (2.2)5.75 (2.61)
–3.0 (1.36)
–4.0 (1.81)
–5.0 (2.27)6.0 (2.72)
–2.75 (1.25)
–3.75 (1.7)
–4.75 (2.2)5.75 (2.61)
–––––––––
X32219–
X32319–
X32419–
X32619X32819X32222
–X32322
–X32422
–X32622X32822X32225
–X32325
–X32425
–X32625
–X32825
–X32328
–X32428
–X32628X32828
–X32332
–X32432
–X32632X32832
–X32335
–X32435
–X32635X32835
–X32338
–X32438
–X32638X32838
–––––––––
2.25 (1.02)–
2.25 (1.02)–
3.75 (1.7)–
4.75 (2.2)5.75 (2.61)2.25 (1.02)
–2.25 (1.02)
–3.75 (1.7)
–4.75 (2.2)5.75 (2.61)2.25 (1.02)
–2.25 (1.02)
–3.75 (1.7)
–4.75 (2.2)
–5.75 (2.61)
–3.0 (1.36)
–4.0 (1.81)
–5.0 (2.27)6.0 (2.72)
–3.0 (1.36)
–4.0 (1.81)
–5.0 (2.27)6.0 (2.72)
–3.25 (1.47)
–4.25 (1.93)
–5.25 (2.38)6.25 (2.84)
–3.25 (1.47)
–4.25 (1.93)
–5.25 (2.38)6.25 (2.84)
Whirl BitsC-9 Whirlbits Whirlbits
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS76
Heavy Duty 3/8" Drive • 6 – 150 Ft. Lb. • Std. Pkg. 1A
CP6031 HABADTO21887
3/8"Pin
2–JawPistol
7513025
5.631.00
3.25 (1.47)
ACP6031 HABAK
TO218841/2"Pin
2–JawPistol
7513025
5.631.00
3.25 (1.47)
ACP6031 HABAV
TO218857/16" hex
Quick Change2–JawPistol
7513025
5.751.00
3.25 (1.47)
BCP6300 RSR
TO252853/8"
Friction RingSingle Dog
Pistol40 –150
18014
6.001.25
3.50 (1.59)
B
Picture Ref.Model
Part No.Drive
Socket RetainerClutch Type
Handle StyleTorque Working Ft. / Lb.
Torque Max. Ft. / Lb.Air Consumption cfm†
Overall Length In.Side to Center In.
Pkg Wt. Lb. (kg)
3/8" Drive Impact Wrenches
A
CP
001
A 2" extension is available for the CP6500. 1/2" square drive with 2" extension, friction ring retainer – part no. CA148629.• † Free Speed• Torque ranges should be used as a guide only. Final torque will depend on the joint, operating pressure and drive accessories.• Air Inlet – 1/4" NPT. • CP6500 – reverse torque 625 Ft. Lb.
1/2" Drive • 40 – 360 Ft. Lb. • Std. Pkg. 1
ACP6041 HABAB
TO218881/2"Pin
2–JawPistol
40 – 25037540
6.831.25
6.0 (2.99)
ACP6041 HABAR
TO223311/2"
Friction Ring2–JawPistol
40 – 25037540
6.831.25
6.0 (1.72)
ACP6041 HABAS
TO218907/16" hex
Quick Change2–Jaw Pistol
40 – 25037540
8.131.256.0
BCP6500 RSTO25214
1/2"Pin
Double–DogPistol360525257
1.41 5.8 (4.36)
BCP6500 RSR
TO252161/2"
Friction RingDouble–Dog
Pistol360525257
1.41 5.8 (3.06)
BCP6500 RSS
TO252157/16" hex
Quick ChangeDouble–Dog
Pistol360525257
1.41 5.8 (3.06)
CCP6540 RSTO25312
1/2"Pin
Rocking–DogPistol
40 –120310227.41.38
6.2 (5.99)
CCP6540 RSR
TO253131/2"
Friction RingRocking–Dog
Pistol40 –120
310227.41.38
6.2 (5.99)
CCP6540 RSS
TO253147/16" hex
Quick ChangeRocking–Dog
Pistol40 –120
230227.41.38
6.2 (6.08)
DCP9541 RSTO22162
1/2"PinPin
Pistol20 –180
27516
6.631.32
5.5 (10.44)
DCP9541 RSR
TO221631/2"
Friction RingPin
Pistol 20 – 180
27516
6.63 1.32
5.5 (10.44)
DCP9541 RSS
TO221647/16" hex
Quick ChangePin
Pistol 20 – 180
27516
7.83 1.32
5.8 (10.44)
Picture Ref.Model
Part No.Drive
Socket RetainerClutch Type
Handle StyleTorque Working Ft. / Lb.
Torque Max. Ft. / Lb.Air Consumption cfm†
Overall Length In.Side to Center In.
Pkg Wt. Lb. (kg)
A B C D
Picture Ref.Model
Part No.Drive
Socket RetainerClutch Type
Handle StyleTorque Working Ft. / Lb.
Torque Max. Ft. / Lb.Air Consumption cfm†
Overall Length In.Side to Center In.
Pkg Wt. Lb. (kg)
Heavy Duty General Duty
Heavy Duty
CP
002
1/2" Drive Impact Wrenches
CP
003
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
77
Heavy Duty
3/4" Drives • 75 – 650 Ft. Lb. • Std. Pkg. 1 • † Free Speed • Torque ranges should be used as a guide only. Final torque will depend onthe joint, operating pressure and drive accessories. • Air Inlet – 3/8" NPT.
ACP6060 SASAB
TO240593/4"
Hole2–JawPistol650100059
7.631.78
11.6 (9.71)
ACP6060 SASAK
TO240601"
Hole2–JawPistol650100059
7.631.78
11.8 (5.35)
ACP6060 SASAR
TO240583/4"
Friction Ring2–JawPistol650100059
7.631.78
11.8 (5.35)
BCP6760 RSTO25309
3/4"Hole2–JawPistol60092541
9.051.8
11.2 (5.08)
BCP6760RS1TO25311
1"Hole2–JawPistol60092541
9.05 1.8
11.2 (5.08)
BCP6760 RSR
TO253103/4"
Friction Ring2–JawPistol60092541
9.05 1.8
11.2 (5.08)
Picture Ref.Model
Part No.Drive
Socket RetainerClutch Type
Handle StyleTorque Working Ft. / Lb.
Torque Max. Ft. / Lb.Air Consumption cfm†
Overall Length In.Side to Center In.
Pkg Wt. Lb. (kg)
A B C D
CCP6700 RSTO25306
3/4"Hole
Jumbo DogPistol600950398.91.8
12.6 (5.72)
CCP6700 RS1
TO253081"
HoleJumbo Dog
Pistol600950398.91.8
12.6 (5.72)
CCP700 RSRTO25307
3/4"Friction RingJumbo Dog
Pistol600950398.91.8
12.6 (5.72)
DCP9561 RSTO22235
3/4"HolePin
Pistol75 – 500
750358.51.75
10.5 (4.76)
Picture Ref.Model
Part No.Drive
Socket RetainerClutch Type
Handle StyleTorque Working Ft. / Lb.
Torque Max. Ft. / Lb.Air Consumption cfm†
Overall Length In.Side to Center In.
Pkg Wt. Lb. (kg)
General Duty
3/4" Drive Impact Wrenches
1" – 11/2" Drive Impact WrenchesHeavy Duty 1" Drive – 200 – 1250 Ft. Lb. • Std. Pkg. 1A
CP6110 GASEDTO24425
1"Hole
Twin LobeD Outside
125019005313
1.7521.4 (9.71)
ACP6110 GASEL
TO24426#5 SplineIntegral
Twin LobeD Outside
125019005313
1.7521.4 (9.71)
ACP6110 PASED
TO251001"
HoleTwin Lobe
D Inside Trigger125019005313
1.7521.4 (9.71)
ACP6110 PASEL
TO25101#5 SplineIntegral
Twin LobeD Inside Trigger
125019005313
1.7521.4 (9.71)
Picture Ref.Model
Part No.Drive
Socket RetainerClutch Type
Handle StyleTorque Working Ft. / Lb.
Torque Max. Ft. / Lb.Air Consumption cfm†
Overall Length In.Side to Center In.
Pkg Wt. Lb. (kg)
A CP
004
ACP0611GASED
TO225801"
Hole2–Jaw
D Outside900 – 1800
280085
12.52.25
22.4 (10.16)
ACP0611GASEL
TO22581#5 SplineIntegral2–Jaw
D Outside900 – 1800
280085
12.52.25
22.4 (10.16)
ACP0611PASED
TO225801"
Hole2–Jaw
D Inside Trigger900 – 1800
280085
12.52.25
22.4 (10.16)
ACP0611PASEL
TO22580#5 SplineIntegral2–Jaw
D Inside Trigger900 – 1800
280085
12.52.25
22.4 (10.16)
BCP6120 GASED
TO1823711/2"Hole2–Jaw
D Outside2000350095
14.752.31
33.8 (15.34)
BCP6120 GASEL
TO17755#5 SplineIntegral2–Jaw
D Outside2000 3500 95
14.752.31
33.8 (15.34)
BCP6120 PASED
TO1884111/2"Hole2–Jaw
D Inside Trigger2000 3500 95
14.752.31
33.8 (15.34)
BCP6120 PASEL
TO18235#5 SplineIntegral2–Jaw
D Inside Trigger2000 3500 95
14.752.31
33.8 (15.34)
Picture Ref.Model
Part No.Drive
Socket RetainerClutch Type
Handle StyleTorque Working Ft. / Lb.
Torque Max. Ft. / Lb.Air Consumption cfm†
Overall Length In.Side to Center In.
Pkg Wt. Lb. (kg)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS78
CP
005
CP
006
A
B
Picture Ref.Model
Part No.Drive
Socket RetainerClutch Type
Handle StyleTorque Working Ft. / Lb.
Torque Max. Ft. / Lb.Air Consumption cfm†
Overall Length In.Side to Center In.
Pkg Wt. Lb. (kg)
Torque Controlled • Std. Pkg. 1 A
CP6031 TEBAKTO21951
1/2"Pin
2–JawPistol
154025
6.251.375
6.6 (2.99)
ACP6031 TEBAV
TO219527/16" hex
Quick Change2–JawPistol
635257.5
1.375 3.8 (1.72)
BCP6041 TEBAB
TO219531/2"Pin
2–JawPistol
35115408.31.25
9.6 (4.36)
BCP6041 TEBAD
TO21954C Spline
Quick Change2–JawPistol
1590409.61.25
6.75 (3.06)
BCP6041 TEBAS
TO219557/16" hex
Quick Change2–JawPistol
1590409.6 1.25
6.75 (3.06)
Picture Ref.Model
No.Drive
Socket RetainerClutch Type
Handle StyleTorque Working Ft. / Lb.
Torque Max. Ft. / Lb.Air Consumption cfm†
Overall Length In.Side to Center In.
Pkg Wt. Lb. (kg)
† Free Speed • Torque ranges should be used as a guide only. Final torque will depend on the joint, operating pressure and drive accessories. • Air Inlet – CP6031 / CP6041 – 1/4" NPT, CP6060 – 3/8" NPT, CP0610 – 1/2" NPT. CP0610–T: Lock out feature to override theshut-off, for “turn of the nut” fastening.
Torque Controlled Tools
A B
1" – 11/2" Drive Impact Wrenches (continued)
Heavy Duty 1" –11/2" Drive – 280 – 2400 Ft. Lb. • Std. Pkg. 1
CP
008
CP
007
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
79
† Free Speed • Torque ranges should be used as a guide only. Final torque will depend on the joint, operating pressure and drive accessories. • Air Inlet – CP6031 / CP6041 – 1/4" NPT, CP6060 – 3/8" NPT, CP0610 – 1/2" NPT. CP0610–T: Lock out feature to override theshut-off, for “turn of the nut” fastening.
Torque Controlled Tools (continued)
CCP6060 TESAB
TO241763/4"
Hole2–JawPistol13040059
9.442
13.2 (5.99)
CCP6060 TESAK
TO216061"
Hole2–JawPistol13040059
9.442
13.2 (5.99)
CCP6060 TESAT
TO21604E Spline
Quick Change2–JawPistol10030059
10.942
13.4 (6.08)
DCP0610 TELUD
TO180561"
Hole3–Jaw
D Outside30060059
15.42.125
23.0 (10.44)
DCP0610 TELUL
TO18044#5 SplineIntegral3–Jaw
D Outside30060059
15.4 2.125
23.0 (10.44)
Picture Ref.Model
No.Drive
Socket RetainerClutch Type
Handle StyleTorque Working Ft. / Lb.
Torque Max. Ft. / Lb.Air Consumption cfm†
Overall Length In.Side to Center In.
Pkg Wt. Lb. (kg)
D
C
Torque Controlled • Std. Pkg. 1
Grinders for Cone Wheels and Type 1 Wheels • Std. Pkg. 1Features: • 3" (80 mm) – 6" (150 mm) – 8" (200 mm) Diameter• 1.61 – 3.62 hp; 3800 – 12,000 rpm• 5/8"–11 Threaded spindle• 1/2" Air inlet thread• 5/8" Hose intake diameter
PowerAir Consumption
PictureRef.
AABCDDDEE
6.6 (3.0)6.6 (3.0)9.9 (4.5)7.7 (3.5)11.2 (5.1)12.3 (5.6)12.3 (5.6)12.7 (5.8)13.9 (6.3)
Model Part No.
12,00090009000600060006000380045004500
In. mm hp W
615170171061517017206151701740615170173061517017506151701770615170208061517017606151701780
1.741.613.221.612.703.622.702.413.22
130012002400120020002700200018002400
333
6 x 1 x 5/8
6 x 1 x 5/8
6 x 1 x 5/8
6 x 1 x 5/8
8 x 1 x 5/8
8 x 1 x 5/8
808080
150 x 25 x 15.9150 x 25 x 15.9150 x 25 x 15.9150 x 25 x 15.9200 x 25 x 15.9200 x 25 x 15.9
Pkg. Wt.Lb. (kg)
341938122127171717
1691861013888
645797488086706770
302746233841333233
K1120B3CWYK190B3CWYK290B3CWY
K160B6YK260B6YK360B6YK338B6YK245B8YK345B8Y
E
D
C
B
A
Warning: Comply with the speeds recommended by component and abrasive manufacturers.
Type 1 Wheel
Wheel, type 16 – 18 – 18Rand 19
Grinders
Wheel Max Capacity D x E x d @ Free Speed @ Max Output
cfm l / s cfm l / s
E
D
d
FreeSpeedrpm
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS80Grinders (continued)
CP
010
Grinders for Carbide Burrs, Mounted Points and Sanding Discs • Std. Pkg. 1Supplied with: Series 200 resilient collet • 1/4" (5.55 – 6.35 mm) Diameter • 0.8 – 1.5 hp; 12,000 – 28,000 rpm • 3/8" Air inlet thread • 3/8" Maximum capacity collet.
PowerAir Consumption
PictureRef.
AAAAAAAABBBBBBBBCDE
2.9 (1.3)2.9 (1.3)3.1 (1.4)2.9 (1.3)3.1 (1.4)2.9 (1.3)3.1 (1.4)3.1 (1.4)2.0 (0.9)2.0 (0.9)2.2 (1.0)2.0 (0.9)2.2 (1.0)2.0 (0.9)2.2 (1.0)2.2 (1.0)4.6 (2.1)5.9 (2.7)3.1 (1.4)
3/83/83/83/83/83/83/83/83/83/83/83/83/83/83/83/83/83/81/2
Model Part No.Free Speed
rpm hp W
28,00024,00022,00019,00018,00015,00015,00012,00028,00024,00022,00019,00018,00015,00015,00012,00012,00012,00012,000
6151701500615170151061517015206151701530615170154061517015506151701560615170157061517015806151701590615170160061517016106151701620615170163061517016406151701650615170169061517017006151700600
K628–9K624–9K922–9K619–9K918–9K615–9K915–9K912–9
KC628–9KC624–9KC922–9KC619–9KC918–9KC615–9KC915–9KC912–9
KC912–300–9KC912–500–9
KA11120–9
0.800.801.210.801.210.801.211.210.800.801.210.801.210.801.211.211.211.211.50
6006009006009006009009006006009006009006009009009009001100
cfm l / s cfm l / sPkg. Wt.Lb. (kg)
Hose IntakeDia. In.
34212813211317133421281321131713131321
1610136106861610136106866610
32323832383236343232383238323634343440
15151815181517161515181518151716161619
@ Free Speed @ Max Output
B
C
CP
009
Vertical Grinders
Grinders for Depressed Center Wheels • Std. Pkg. 1 • Features: 9" (230 mm) Diameter • 1.34 – 3.62 hp; 4500 – 6000 rpm 5/8"– 11 Threaded spindle • Maximum wheel capacity (D x E x d): 9 x 1/4 x 7/8 In. / (230 x 6.4 x 22.2 mm) • 1/2" Air inlet thread5/8" Hose intake diameter.
Air ConsumptionPicture
Ref.
AAAA
9.2 (4.2)9.7 (4.4)9.2 (4.2)9.7 (4.4)
Model Part No.
6000600045004500
Free Speedrpm hp W
6151701860615170192061517018906151701950
3.003.622.282.68
2200270017002000
cfm l / s cfm l / sPkg. Wt.Lb. (kg)
21251519
101279
82916872
39433234
@ Free Speed @ Max Output
KL260B9YKL360B9YKL245B9YKL345B9Y
A
B
Warning: comply with the speeds recommended by component and abrasive manufacturers
Warning: comply with the speeds recommended by component and abrasive manufacturers.
Type 27 wheel with hub Type 27–42 wheel Type 41 wheel
Power
EA
Angle GrinderB 6.6 (3.0)60006151701800 1.34 1000 19 9 50 24KA160B9Y
D
K6..-9 / K9..-9 / KC6..-9 / KC9..-9 / KA11120-9Series 200 Collet
CP
011
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
81Grinders (continued)
E
Grinders for Carbide Burrs, Mounted Points and Sanding Discs • Std. Pkg. 1 • Supplied with: Series 300 resilient collet • 1/4" (5.55 – 6.35 mm) Diameter • 0.5 – 0.8 hp; 12,000 – 28,000 rpm • 1/4" Maximum capacity collet.
K3..-9 / KC3..-9 / KA3..(E)9 / KA613(E)9
Series 300 Collet
CA
B F
PowerAir Consumption
PictureRef.
AAAABBBBB
1.26 (.57)1.26 (.57)1.26 (.57)1.26 (.57).84 (.38).84 (.38).84 (.38).84 (.38).84 (.38)
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Model Part No.Free Speed
rpm hp W
K340–9K331–9K325–9K320–9
KC340–9KC331–9KC325–9KC320–9KC318–9
615170139061517014006151701410615170142061517014306151701440615170145061517002706151701960
40,00031,00025,00020,00040,00031,00025,00020,00018,000
0.50.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
375375375375375375375375375
cfm l / s cfm l / sPkg. Wt.Lb. (kg)
Hose IntakeDia. In.
Air InletThread In.
16.09.57.55.016.09.57.55.05.0
7.54.53.52.57.54.53.52.52.5
212020172120201717
10.09.59.58.010.09.59.58.08.0
CCDDEF
1.35 (.61)1.35 (.61)1.13 (.51)1.13 (.51)3.10 (1.4)2.4 (1.10)
5/16
5/16
5/16
5/16
3/8
3/8
1/4
1/4
1/4
1/4
3/8
3/8
KA320E9KA312E9KA320–9KA312–9KA613E9KA613–9
615170146061517014706151701480615170149061517013606151701350
20,00012,00020,00012,00013,00013,000
0.50.5 0.5 0.5 0.80.8
375375375375600600
13.56.513.56.521.021.0
6.53.06.53.010.010.0
211921193232
10.09.010.09.015.015.0
at Free Speed at Max Output
Warning: comply with the speeds recommended by component and abrasive manufacturers.
Straight Grinders
Angle Grinders
D
Scalers
PictureRef.
A
AABCDE
3.3 (1.5)4.4 (2.0)4.4 (2.0)6.6 (3.0)6.6 (3.0)8.8 (4.0)
Model Part No.
615174023061517402506151740270615174030061517403106151740400
Bore In. (mm)
StrokeIn. (mm)
.71 (18.0)
.93 (23.5)
.93 (23.5)1.13 (28.6)1.13 (28.6)1.30 (33.0)
1.18 (30.0)1.40 (35.6)1.40 (35.6)1.54 (39.0)1.54 (39.0)1.94 (49.2)
ISO 1/2 sq.ISO 1/2 sq.ISO 1/2 sq.ISO 1/2 sq.
Hex 5/8
ISO 1/2 sq.
ShankIn.
Blows perMinute
Air InletThread In.
HoseIntake
Dia. In.cfm l / sPkg. Wt.Lb. (kg)
380030003000220022002200
3.05.55.58.08.08.5
1.42.62.63.83.84.0
1/41/41/41/41/41/4
5/16
3/83/83/83/83/8
CP
012
Air Consumption @ Free Speed
B15BB16BB18BB19BB19B1B21B
B
C
Chippers – Chisel Scalers • Std. Pkg. 1All models: Supplied without chisel. D
E
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS82
A
Standard Needle Scalers and Vibration–Damped Needle Scalers • Std. Pkg. 1All models: Supplied with chisel tip and flatnosed sleeve except for B18MAV and B19MAV (round sleeve).
CP
013
B
Scalers (continued)
PictureRef.
AABBC
3.5 (1.6)5.7 (2.6)5.7 (2.6)8.2 (3.7)12.4 (5.6)
Model Part No.
Standard Needle Scalers
61517402406151740260615174028061517403206151740410
.71 (18.0)
.93 (23.5)
.93 (23.5)1.13 (28.6)1.30 (33.0)
1.18 (30.0)1.40 (35.6)1.40 (35.6)1.54 (39.0)1.94 (49.2)
12 x 1/8 (3)19 x 1/8 (3)19 x 1/8 (3)28 x 1/8 (3)35 x 5/32 (4)
Blows perMinute
Air InletThread In.
HoseIntake
Dia. In.cfm l / sPkg. Wt.Lb. (kg)
38003000300022002200
3.05.55.58.08.5
1.42.62.63.84.0
1/41/41/41/41/4
5/16
3/83/83/83/8
Air Consumption @ Free Speed
B15MB16MB18MB19MB21M
DE
7.7 (3.5)9.8 (4.4)
61517402906151740330
.93 (23.5)1.13 (28.6
1.40 (35.6)1.54 (39.0)
19 x 1/8 (3)28 x 1/8 (3)
30002200
5.58.0
2.63.8
1/41/4
3/83/8
B18MAVB19MAV
Vibration–Damped Needle Scalers
Bore In. (mm)
StrokeIn. (mm)
E
Qty. x Dia.In. (mm)
NeedleCapacity
C
D
Industrial Air Toolis an authorized
Chicago Pneumaticservice and repair center. We stock
thousands of partsto keep your tools in top condition.
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
83
• “S” = designates muffled “Hushed Power” models • “EX” = Extended Handle for trench work • “VR” = Vibration Reduced
CP–0111–THLAT022079
Latch30.0 (13.6)20 (508)1 x 41/4
36.0 (16.3)
CP–0111–THLA–EXT019354
Latch33.0 (15.0)303/8 (772)
1 x 41/4
39.0 (17.7)
CP–1210T022071
Latch42.0 (19.0)
211/8 (536.5)1 x 41/4
47.0 (21.3)
CP–1210–ST022156
Latch44.0 (19.9)
211/8 (536.5)1 x 41/4
49.0 (22.2)
Air Consumption Chart
• 25 Lb. Class: 45 cfm at 90 PSI• 35 Lb. Class: 48 cfm at 90 PSI• 60 Lb. Class: 63 cfm at 90 PSI
• 80 / 90 Lb. Class: 81 cfm at 90 PSI
Demolition Tools
CP–1210–VRT024338
Latch49.0 (22.3)
231/2 (569.9)1 x 41/4
55.0 (25.0)
CP–1210–VRST024534
Latch51.0 (23.2)
231/2 (569.9)1 x 41/4
47.0 (21.3)
CP–1230–1.12T022073
Latch65.0 (29.5)
261/2 (673.1)11/8 x 6
66.0 (31.7)
CP–1230–S–1.12T022158
Latch68.0 (30.9)
261/2 (673.1)11/8 x 6
68.0 (32.2)
CP–1230–1.25T022074
Latch65.0 (29.5)
261/2 (673.1)11/4 x 6
66.0 (31.7)
CP–1230–S–1.25T022159
Latch68.0 (30.9)
261/2 (673.1)11/4 x 6
68.0 (32.2)
CP–1230–VR–1.12T024335
Latch74.0 (33.6)
271/2 (698.5)11/8 x 6
76.0 (35.9)
CP–1230–VRS–1.12T024227
Latch76.0 (35.9)
271/2 (698.5)11/8 x 6
81.0 (36.8)
CP–1230–VR–1.25T024083
Latch74.0 (33.6)
271/2 (698.5)11/4 x 6
79.0 (35.9)
CP–1230–VRS–1.25T024239
Latch76.0 (34.5)
271/2 (698.5)11/4 x 6
81.0 (36.8)
Catalog No.Part No.Retainer
Net Wt. Lb. (kg)Overall Length In. (mm)
Std. Hex Chuck Sz. In.Pkg Wt. Lb. (kg)
CP
014
Breakers – Four Bolt • Std. Pkg. 1 CP Breakers can be ordered with mufflers, or mufflers can be purchased separately. CP Four-Bolt breakers require minimal servicing tomaintain peak operating efficiency over extended periods of rugged use.
CP–0111 and CP–1210 Applications:The CP-0111 (25 pound class) and CP–1210 (35 pound class) demolition tools are lightweight yet designed for light- to medium-construction and plant maintenance work such as light demolition offloors, pavement, bridge maintenance, macadam, frozen ground andmasonry walls. These tools are very popular for bridge deck jobs.CP–0111–THLA–EX has an extended handle for trench work.
Features:• Alloy steel forgings – provide excellent durability.• Four–bolt backhead design – withstands rugged use.• Integral oilers – provide continuous lubrication.• Heavy-duty front head springs on CP–1210–S equipped with a
“Hushed Power” muffler – to reduce sound level.• Vibration reduced handle (VR Series) available on CP–1210.
CP–1230 and CP–1240 Applications:The CP-1230 (60 pound class) and CP–1210 (80 / 90 pound class)demolition tools are designed to deliver the power and durabilitynecessary for a variety of construction and plant maintenance applications such as breaking heavy concrete, reinforced concrete,frozen ground, macadam, boulders and pavement.
Features:• Alloy steel forgings – provide excellent durability.• Four–bolt backhead design – withstands rugged use.• Integral oilers – provide continuous lubrication.• Heavy-duty front head springs – reduce reaction back to operator.• Reversible piston – reduces maintenance cost.• Air inlet swivel – for easy maneuverability• “Hushed Power” versions – CP–1230–S, CP–1240–S are equipped
with mufflers.• Vibration reduced handle (VR Series) available on CP–1230 and
CP–1240.
25 Lb. Class 35 Lb. Class
Catalog No.Part No.Retainer
Net Wt. Lb. (kg)Overall Length In. (mm)
Std. Hex Chuck Sz. In.Pkg Wt. Lb. (kg)
Catalog No.Part No.Retainer
Net Wt. Lb. (kg)Overall Length In. (mm)
Std. Hex Chuck Sz. In.Pkg Wt. Lb. (kg)
60 Lb. Class35 Lb. Class
60 Lb. Class
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS84
CP–1240–1.12T022075
Latch83.0 (37.6)
283/4 (730.3)11/8 x 6
89.0 (40.4)
CP–1240–S–1.12T022211
Latch86.0 (39.0)
283/4 (730.3)11/8 x 6
92.0 (42.6)
CP–1240–1.25T022076
Latch83.0 (37.6)
283/4 (730.3)11/4 x 6
89.0 (40.4)
CP–1240–S–1.25T022222
Latch86.0 (39.0)
283/4 (730.3)11/4 x 6
92.0 (42.6)
CP–1240–VR–1.12T024337
Latch92.0 (40.5)30 (762.0)11/8 x 6
95.0 (43.2)
CP–1240–VRS–1.12T024536
Latch95.0 (41.8)30 (762.0)11/8 x 6
98.0 (44.5)
CP–1240–VR–1.25T024336
Latch92.0 (40.5)30 (762.0)11/4 x 6
95.0 (43.2)
CP–1240–VRS–1.25T024535
Latch95.0 (41.8)30 (762.0)11/4 x 6
98.0 (44.5)
CP–4181–PUSERT0217317/8 (22.2)
13/16 x 8 (30.2 x 203)1080
Pistol / Outside23.0 (584.0)29.0 (13.2)
CP–4181–PULERT0216141 (25.4)
13/16 x 11 (30.2 x 279)720
Pistol / Outside26.0 (660.0)33.0 (15.0)
CP–4180–8T0239207/8 (22.2)
13/16 x 8 (30.2 x 203)1080
Closed / Outside23.0 (584.0)32.5 (14.8)
CP–4180–11T0239217/8 (22.2)
13/16 x 11 (30.2 x 279)720
Closed / Outside26.0 (660.0)33.0 (15.0)
Catalog No.Part No.
Cap. Rivet Cutting Dia. In. (mm)Bore and Stroke In. (mm)
Blows per MinuteHandle / Trigger
Overall Length In. (mm)Pkg Wt. Lb. (kg)
80 / 90 Lb. Class
Demolition Tools (continued)
Hammers
Busters • Std. Pkg. 1Applications: These tools are excellent for medium to heavy concrete demolition, cuttinglarge rivets and bolts, and other cutting and ripping operations.All Models: air consumption: CP–4181–PUSER 37 cfm at 90 PSI / CP–4181–PULER 38 cfm at90 psi; type RB Chisel Shank 3/8" (NPTF) air inlet thread.
CP–4181 • Boyer valve and long piston stroke – deliver the powerrequired to handle the toughest jobs. • Teasing throttle – precise control. • Forged steel handle – designed for long life under rugged conditions. • Hardened steel piston and cylinder – excellent wearresistance. Standard equipment: 2 Spare rubber bumpers (P–072334) • Lowersleeve (P072333) • Upper sleeve (P072332) • Wire retainer spring(P073942)
CP–4180 • Unique air “lockout” mechanism, patented by CP – automatically stops air flow to the tool if retainer is loosened orremoved; helps prevent chisel from being accidentally ejected; toolremains disarmed until retainer is correctly placed. • Screw-on-retainer – provides a positive lock of chisel to tool; has resilientbumper to absorb shock of chisel when driven forward; retainer acts as integral part of the “lockout” mechanism.
Catalog No.Part No.
Bore & Stroke In. Blows per Minute
Chisel Bushing In. (mm)Overall Length In. (mm)
Pkg Wt. Lb. (kg)
Chipping Hammers • Std. Pkg. 1 • Applications: This heavy-duty tool is designed forrugged use in foundries, shipyards, refineries, fabrication shops and construction applications. Available in 1" – 4" stroke versions to offer the power levels necessary for avariety of uses from light to medium chipping and trimming through heavy cutting.
Features:Ring valve – hard-hitting hammers which perform well in dirty environments. • Teasing throttle – provides precise control. • Splinelock – prevents loosening of handle / cylinder. • Forged steel handle– withstands rugged use. • Choice of bushing: Round – chisel freelyrotates; Hex – prevents chisel rotation • Heat treated cylinders withchrome plated bores – ensure excellent durability.
All Models:• 3/8" (NPTF) air inlet thread: air consumption at 90 PSI, 23–27 cfm.• Pistol grip handle with self-closing outside trigger. StandardEquipment: All Models• Economy retainer (P107243) – accepts oval collar chisels• Wire retainer spring (P070994)Optional Equipment: All Models• Hose swivels and chisel retainers.
CP–4125–PALAT02080711/8 x 22100
.68 (17.3) Round13.25 (337)13.0 (5.9)
CP–4125–PALET02129811/8 x 22100
.58 (14.7) Hex.13.25 (337)13.0 (5.9)
CP–4125–PAMAT02080811/8 x 31860
.68 (17.3) Round14.25 (362)14.25 (6.5)
CP–4125–PAMET02129911/8 x 31860
.58 (14.7) Hex.14.25 (362)14.25 (6.5)
CP–4125–PANAT02080911/8 x 41620
.68 (17.3) Round15.5 (394)15.25 (6.9)
CP–4125–PANET02130011/8 x 41620
.58 (14.7) Hex.15.5 (394)15.25 (6.9)
CP
015
CP
016
CP
017
Catalog No.Part No.Retainer
Net Wt. Lb. (kg)Overall Length In. (mm)
Std. Hex Chuck Sz. In.Pkg Wt. Lb. (kg)
Catalog No.Part No.Retainer
Net Wt. Lb. (kg)Overall Length In. (mm)
Std. Hex Chuck Sz. In.Pkg Wt. Lb. (kg)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
85Portable Band Saws
CSU
002
Saw Blades for Portable Band Saws – M42 Cobalt Steel • Std. Pkg. 1Unitec SuperBand™ saw blades are made of tougher M42 steel. 8% Cobalt gives them the highest heat resistance and wear resistancein portable band saw blades with a hardness of Rc 67–69. SuperBands easily cut most ferrous and non-ferrous metals includingstainless steels, inconel, chrome, hastelloy, tool steels, “super” alloys and other materials. Longer life, fewer blade changes and thefastest cutting rates result in the lowest cost per cut.
For Saw No.: 5–6003–0010 • 5–6043–0010 • 5–6046–0010
For Saw No.: 5–6031–0010 • 5–6041–0010 • 5–6047–0010
*Variable tooth pitch (10/14 and 8/12) saw blades cut faster and last longer than standard pitch blades. Varying tooth size and gulletdepth reduces harmonic vibration for quieter more efficient cutting.
No. TPIWall or Material
ThicknessBlade Size In.
L x W x T Blade TypePkg. Wt. Lb. (kg)
925060010925060020925060030925060040
1814
10 / 14*8 / 12*
1/8" – 1/4"3/16" – 1/2"3/16" – 1/2"1/2" & Up
447/8 x 1/2 x .025447/8 x 1/2 x .025447/8 x 1/2 x .025447/8 x 1/2 x .025
M42 Steel with 8%Cobalt
.10 (.045)
.10 (.045)
.10 (.045)
.10 (.045)
925060220925060230925060240925060200
1410 / 14*8 / 12*
8
3/16" – 1/2"3/16" – 1/2"1/2" & Up3/4" & Up
66 x 5/8 x .02566 x 5/8 x .02566 x 5/8 x .02566 x 5/8 x .025
M42 Steel with 8%Cobalt
.20 (.09)
.20 (.09)
.20 (.09)
.20 (.09)
CSU
001
Portable Band Saw Specifications
No.Power/ Motor
Specs.Blade Speed
(S.F.P.M.) RectangularBlade Size In. (mm) Housing
OverallLength
In. (mm)Pkg. Wt.Lb. (kg)Round
41/2 x 43/4(114 x 120) 41/2 x 43/4(114 x 120)41/2 x 43/4(114 x 120)
7 x 7(180 x 180)
7 x 7(180 x 180)
7 x 7(180 x 180)
447/8 x 1/2(1140 x 13)447/8 x 1/2(1140 x 13)447/8 x 1/2(1140 x 13)
66 x 5/8(1676 x 16)
66 x 5/8(1676 x 16)
66 x 5/8(1676 x 16)
Aluminum
Aluminum
StainlessSteel
StainlessSteel
StainlessSteel
Stainless Steel
211/2(546)211/2(546)22
(550)283/4(730)
283/4(730)
283/4(730)
14.0(6.35)14.0(6.35)23.0
(10.44)28.0
(12.70)
28.0(12.70)
28.0(12.70)
Airband5–6003-0010
Electric5-6046-0010
Hydraulic6-6043-0010Deep Throat
Airband5-6031-0010Deep Throat
Electric5-6047-0010Deep Throat
Hydraulic5-6041-0010
0.7 hp / 90 psi-20 CFM
5.8 Amp /120V AC
1.6 hp / 2000psi-4 GPM
1.3 hp / 90 psi-43 CFM
5.8 Amp / 120V AC
1.6 hp / 2000psi-4 GPM
Variable130 – 220Variable
100 – 245Variable
100 – 256Variable
240 – 295
Variable100 – 245
Variable100 – 256
43/4(120)43/4(120)43/4(120)
7(180)
7(180)
7(180)
Capacity In. (mm)
5–6003–0010 5–6046–0010 5-6043-0010 5–6031–0010 5–6047–0010 5–6041–0010
CSU
003
Vise Clamps for Portable Band SawsClamps securely to the material for accurate cuts. The following shapes may be cut up to the maximum sizes listed:
5–6003–9000 Clamp-On Vise for 43/4" Band Saw Models • 5–6003 • 5–6043 • 5–6046Rounds: 41/2" (115 mm) Squares: 3" (75 mm) Angles: 3" (75 mm)
5–6031–9400 Clamp-On Vise for 7" Band Saw Models • 5–6031 • 5–6041 • 5–6047Rounds: 7" (180 mm) Squares: 5" (125 mm) Angles: 5" (125 mm)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS86
CSU
004
Portable Power Hacksaws
Portable Power Hacksaws – Air and Electric • Std. Pkg. 1• Unitec portable hacksaws are ideal for cutting pipe, tanks structural steel and other
materials. The hacksaws have a stroke of 23/8" and will cut pipe up to 24" diameter inone pass. They are ideal for use on-site or in the shop.
• These saws are useful for working in confined spaces. The saw easily attaches to aclamp to insure accurate cutting of pipe and other material.
• Designed for the toughest service refineries, chemical plants, utilities, pipelines, con-struction and heavy industry. The saws are available in air or electric models.
TypeNo.
PowerAir Consumption
Air Connection
For Pipes Up ToFor Profiles Up To
Strokes Per MinuteBlade StrokeNet Weight
Included
Pkg. Wt. Lb. (kg)
ElectricASTX649
1.5 hp / 110V–––
24" Diameter2111/16" Height1127/64" Width
35023/8"
13 Lbs.2 Saw blades Z22-61 Set of wrenches
13.0 (5.90)
ElectricASTXE649
1.5 hp / 110V–––
24" Diameter2111/16" Height1127/64" Width
100 – 35023/8"
13 Lbs.2 Saw blades Z22-61 Set of wrenches
13.0 (5.90)
Pneumatic512120010
1.5 hp / 90 psi51 cfmR 3/4"
1/2" Hosepiece I.D.24" Diameter
2111/16" Height1127/64" Width
33023/8"
15.4 Lbs.2 Saw blades Z22-61 Set of wrenches
1 Coupling No. 411000400715.4 (6.99)
See accessory list for clamps,saw blades, etc.
CSU
005
Air Powered Concrete Saws
Air Powered Concrete Saws • Std. Pkg. 1 • Powerful, rugged saws are designed for tough cutting jobs.Ideal for joint sawing, floor sawing, trenching, road repair and plant maintenance.
Features and Benefits:Walk-behind up to 20"; Hand-held up to 18".Wet or dry cutting of concrete, asphalt and other materials. • 7" Cutting depth with 20" blade. 6" Cutting depth with 18" blade. • Air motor and gearbox provide 9.5 hp and high torque.
No gas or engine fumes. • Low maintenance; no belts, carburetors or fuel lines to maintain. Rugged Steel construction for long life and low vibration. • Dust collection vacuum port.Built-in oiler for motor lubrication.
TypeNo.
PowerMax. Depth of Cut In.
Max. Blade Capacity In.CFM @ 100 psi
DrivePkg. Wt. Lb. (kg)
Walk-BehindCSR1509.5 hp
72092
Gearbox107 (48.55)
Hand-HeldCSH1509.5 hp
71892
Gearbox28 (12.70)
Hand-HeldCSH1259.5 hp
51492
Gearbox26 (11.80)
Hand-HeldCSH1005.0 hp
41490
Direct22 (9.98)
CSU
006
Hand Held 14" Pneumatic Saw
CS–100 • Hand Held 14" Pneumatic Saw • Std. Pkg. 1The CS–100 hand held saw is the versatile answer to difficult sawing needs in masonry, block, brick, asphalt and concrete.
• Adjustable depth, 0" – 41/2"• Uses diamond saw blades up to 14" or abrasive saw
blades up to 12"• Adjustable blade guard• In-line oiler with safety relief cap and sight gauge• Compact and light• Dry or wet cutting• No gas or engine fumes• No belts, pistons, gas lines or carburetors to maintain
No.Cutting Depth In.
Blade Capacity In.Arbor Size In.
Blade Speed (RPM)Air Consumption
HorsepowerPkg. Wt. Lb. (kg)
CS–1000 – 41/2
141
5,20090 cfm @ 90 psi
422.0 (9.98)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
87
No.Cutting Capacity In. (mm)
Air MotorChain Speed
Air Consumption CFMOperating Pressure
Air Connection NPTFOverall Length In. (mm)
Min. ID of Hoses In. Pkg. Wt. Lb. (kg)
51005009010 (250)
1.2 hp (0.9 kW)3.8 Ft. per Second
3090 psi
1/4"201/4 (514)
3/84.4 (2.0)
CSU
008
Utility Air Chain Saw • Std. Pkg. 1 • Generalutility pneumatic chain saw cuts wood andplastics fast, yet it is lightweight. Ideal forapplications in chemical plants, utilities,mines and construction.
Carbide Tipped Chain Saw • Fits All Chain Saws
• Outlasts up to 10 regular chains.• Stays sharp up to 25 times longer.• Cuts tough materials efficiently. Ideal for
plastics, creosoted wood (R.R. Ties, poles,etc.) and hardwoods.
• Use where severe cutting conditions prevail,such as sand, mud, salvage work, etc.
• High impact – high hardness carbide.• Easily resharpened.• Guaranteed against defects in workmanship
on the silver solder for 30 days.
TypeModel No.
Cutting Capacity Hardwood In.
Plastic In.Air Consumption CFMMotor Output hp (kW)
Length In. (mm)Air Connection
ID of Hoses In. (mm)Pkg. Wt. Lb. (kg)
Wood and Plastic510070000
17" / 21" / 25"–
924 (3.0)
34 (865)R 3/4"i.5/8 (15)16 (7.5)
Underwater / Wood510080000
17" / 21" / 25"–
924 (3.0)
34 (865)R 3/4"i.5/8 (15)16 (7.5)
CSU
007
Chain Saws
Air Chain Saws • Std. Pkg. 1 • For cutting wood and plastic. Used successfully for many years in polyethylene plants, petrochemical industries, utilities, underground mines and marine.
Types and Applications:• 51007 (Wood / Plastic)• 51008 (Underwater / Wood)Benefits:• Safer than gas or electric chain saws in many hazardous
atmospheres and wet environments.
• Less maintenance and easy start up. The saw chain and motorare oiled automatically by two separate lubricating systems.
• Powerful air motor – 4 hp at 90 psi air pressure.• The chain is guarded to protect the operator.• For underwater use specify types 51008.
CSU
009
Pneumatic Rotary Hammer
No.Air Connector
Operating PressureAir Consumption
Water Connection Ball Cock Free Speed
Load SpeedHammering Under Load
Drill Bits for ConcretePerformance Optimum in Concrete
Percussion Core Bits for ConcreteTwist Drill for SteelDrill Bits for WoodMotor Oil Capacity
Pkg. Wt. Lb. (kg)
224040010R 1/2"
Max. 90 psi (6 bar)21 CFM (600 l / min.)
R 1/4"0 – 625 RPM0 – 440 RPM
0 – 300 blows / min.3/16" –1" dia.
15/32" – 13/16" dia.21/2" – 31/2" dia.3/16" – 1/2" dia.
3/16" – 13/16" dia.75 cm3
11.78 (5.3)
Pneumatic Rotary Hammer • Std. Pkg. 1Safety clutch for protection against overloading and accidents. • Adjustable side handle with depth gauge and water flushing. • Gears sealed dust tight with central and permanent lubrication (maintenance). Supplied Kit: (1) case, (1) dust guard, (1) 5-cc bottle of oil.
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS88
Pipe Clamp Saddles for Portable Magnetic Drills • Std. Pkg. 1 Unitec Pipe Clamp Saddles are ideal for drilling on-site or in the shop. The quick-clamping feature allows fast set up on pipes up to20" diameter (larger on request). Use on steel, stainless steel and other materials. The chain tensioner safely secures the saddle to thepipe in any desired position. Four independent steel feet automatically adjust to the contour of the pipe surface. A variety of portablemagnetic drilling machines, air or electric, can be used with the saddles.
Core Drills
CSU
010
CSU
011
Optional Accessories:• Centering Aid• Metal Carrying Case• Anchor Stand• Anchor Stand with vacuum• Motor mount• Vacuum pump, pneumatic• Portable water tank 3.5 Gal• Unicore Wet Diamond Core Bits
No.255.011258.522256.955256.970256.972253.542251.623
Standard Features:• Safety slip clutch• 3-Speed mechanical gear box• Built-in water swivel• 11/4" x 7 UNC spindle• 5/8" x 11 UNC adapter• 360˚ Rotatable side handleDrilling Capacity:• Hand held drilling: 1/2" – 3" dia.• Rig mounted drilling: 1/2" – 6" dia.
Choose PAK100 for Unitec Mag. Drills: ECO–32, ECO–32T and MDM–35Choose PAK200 for Unitec Mag. Drills: AB–4300 (AirBor), E–100 and ECO–100/3
3–Speed Pneumatic Core Drills • Hand Held or Rig Mounted • Std. Pkg. 1 • Industry’s first hand held pneumatic core drills. Ideal for drilling holes in walls, floors, ceilings and for all concrete anchoring systems. Two models, 2.3 or 3.6 hp.
No.Load Speeds
Air MotorAir Consumption CFM
Air PressureAir Connection
Pkg. Wt. Lb. (kg)
213330010300 – 750 – 1500 RPM
2.3 hp77
90 psi3/4" NPT
18.0 (8.17)
213350010200 – 600 – 1200 RPM
3.6 hp123
90 psi3/4" NPT
21.0 (9.53)
No.Dimensions (W x L)
For Pipe Dia. (O.D.) In.Pkg. Wt. Lb. (kg)
PAK10031/4 x 63/831/4 – 10
14.0 (6.35)
PAK20043/8 x 9
6 – 20 (larger on request)
23.0 (10.44)
Pipe Clamp Saddles
BDE
001
Capacity In.
3/8" Drills
Std. Pkg. 1 • 6 Amps – Best in class torque • Ratcheting chuck• Metal Chuck on D21009
• Durable and reliable• Best in class ergonomics• Performance to price ratio
No.
DW21002DW21008DW21009
Chuck Size In.3⁄83⁄83⁄8
No Load Speed RPM
0-25000-25000-2500
Chuck
10012149151-01149151-01
Key
45359KeylessKeyless
Mild Steel3⁄83⁄83⁄8
Oak
111
Pkg. Wt.Lb. (kg)
3.33 (1.51)3.33 (1.51)3.33 (1.51)
DW21002 DW21008 DW21009
3/8" Shorty Drill
Std. Pkg. 1 • Lightweight and compact – gets into the tightest places easily.
Capacity In.
DW160 3⁄8 3.2 1200 26299 45359 3⁄8 11⁄8 3.75 (1.7)
No.ChuckSize In.
Amps120 V
AC Only
No Load SpeedRPM Chuck Key
MildSteel Oak
Pkg. Wt.Lb. (kg)
BDE
002
BDE
003
DW1301/27.0450
10016/453601⁄211⁄24
8.7 (3.95)
DW1311/27.0450
10016/453601⁄2
29⁄16–
11.5 (5.22)
DW1383⁄4
10.0375
*448580-003⁄44–
21.65 (9.82)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
89Self-Feed Bits
DW16301
.3 (.14)
DW163111/8
.35 (.16)
DW163211/4
.4 (.18)
DW163313/8
.45 (.20)
DW163411/2
.5 (.23)
DW163513/4
.55 (.25)
DW16362
.6 (.27)
DW163721/8
.65 (.29)
DW163821/4
.7 (.32)
DW163929/16
.75 (.34)
DW16403
.8 (.36)
DW164135/8
.85 (.39)
DW164245/8
.9 (.41)
DW164651/2"
.6 (.27)
DW164712"
1.0 (.45)
DW16485 Piece
3.25 (1.47)
DW16498 Piece
3.25 (1.47)
No.Diameter In.
Pkg. Wt. Lb. (kg)
No.Diameter In.
Pkg. Wt. Lb. (kg)
No.Description
Pkg. Wt. Lb. (kg)
Self-Feed Bits • Shank Size 7/16"
Self-Feed Bits • Shank Size 7/16"
Replacement Kits • Std. Pkg. 5
DW1643DW1630-1633
.13 (.06)
DW1644DW1634-1638
.19 (.09)
DW1645DW1639-1642
.27 (.12)
No.For
Pkg. Wt. Lb. (kg)
Heavy Duty Self-Feed Bits • Std. Pkg. 1 • Rough Wood Drilling Shank Size 7/16 • 2-Cutter design for maximum drilling efficiency and hole completion • Aggressive self-feed spur for faster drilling • Shank flats for better retention. • Replacement kits include: Spur, set screw, and Hex key.
Bit Extension Self-Feed Bit Kit
Std. Pkg. 1 • Reversible • Uniquely designed for plumbers and electricians for drillinglarge holes in wood • Compact head design fits between tight joists.
Joist & Stud 1/2" Right Angle Drill
BDE
004
BDE
006
Spade-Handle Drills
1/2" Right Angle Drill
Std. Pkg. 1 • Reversible • The versatility of 3 speeds plus straight and right-angle drilling.
BDE
005
No.Chuck Size In.
Amps 120 V AC/DC No Load Speed RPM
Chuck/KeyCapacity In. Steel
Capacity In. Wood Capacity In. Hole Saw
Pkg. Wt. Lb. (kg)
Std. Pkg. 1 • Reversible.
*Chuck key included with chuck.
DW120K 7.0 400, 600, 900
450496 45360 1⁄2 11⁄2 45⁄8 14.95 (6.78)
No.
Amps120 V
AC OnlyNo Load
Speed RPM Chuck Key Steel Wood Self-FeedPkg. Wt.Lb. (kg)
Capacity In.
DW124DW124K
Kit
8.08.0
300 / 1200300 / 1200
1001610016
4536045360
1⁄21⁄2
11⁄211⁄2
45⁄845⁄8
13.5 (6.12)17.25 (7.82)
No.
Amps120 V
AC Only
No Load Speed RPMLow / High Chuck Key Mild Steel Wood Self-Feed
Pkg. Wt.Lb. (kg)
Capacity In.
DW540K9.431/2
55/32 – 11/4
11/238030004.317.5
22.7 (10.3)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS90Hammer Drill
BDE
007
Heavy Duty 1/2" VSR Dual Range HammerdrillStd. Pkg. 1Includes 360° side handle, depth rod and chuckkey with holder • 8.2 Amp motor provides highperformance and overload protection • High /low gear for high speed drilling, or high torqueapplications • Dual mode: hammerdrill / drill forwood, steel, or masonry applications • Rubbergrip and two-finger rubber trigger for increased
comfort • 360° side handle with depth rod offers greater control, versatilityand increased depth accuracy • DW515K includes same as DW515 plusheavy-duty kit box.
No.Amps
Max. Watts OutNo Load Speed Rpm
Blows / Min.Capacity Steel In.
Capacity Wood In.Concrete Optimum In.Concrete Maximum In.
Tool Length In.Tool weight Lb. (kg)
Pkg. Wt. Lb. (kg)
DW515 / DW515K8.2750
0-1050 / 0-24000-18000 / 0-41000
1/21 1/2
3/16-7/165/814
5.5 (2.50)6.5 (2.95) / 11.9 (5.4)
DW567K / DW565K • Std. Pkg. 1 • ReversibleHeavy Duty 1" VSR Three Mode SDS D-HandleRotary Hammer with Kit Box • 6.9 Amp motor provides high performance and overload protectionHard hitting hammer mechanism permits drilling withless noise, vibration and engagement force thanround shank hammerdrills • Chipping (Hammer -Only) mode for mortar removal • Fully sealed gear-box engineered for long life by keeping grease in anddust out • DW565K: Single mode designed specifically for concrete drilling only.
DW540K • Std. Pkg. 1 • Reversible • With Clutch • Heavy Duty 11/2" (38mm) SDS Max Drive Rotary Hammer with Kit Box • 9.4 Amp motor provides high
performance and overload protection • Built forcontinuous, large, deep hole drilling • Hard-hittinghammer mechanism for fast and efficient penetrationDual-wall housing construction with rubber mountsisolates vibration to inner housing • Multiple sealsprevent dust from entering tool for extended hammermechanism life • Switch and brushes designed forlong life in dusty, contaminated environmentsHighly efficient cooling system protects tool intough, continuous-use applications.
DW530K / DW531K • Std. Pkg. 1 • Reversible • With Clutch • Heavy Duty 11/2"(38mm) • With Clutch • Spline Rotary Hammer with Kit Box • 9.4 Amp motorprovides high performance and overload protection • Built for continuous, large,deep hole drilling • Hard-hitting hammer mechanism for fast and efficient penetra-
tion • Dual-wall housing construction with rubbermounts isolates vibration to inner housing • Multiple seals prevent dust from entering tool for extended hammer mechanism life • Highlyefficient cooling system protects tool in tough,continuous-use applications • DW531K: Stoprotation with Bit Lock™ feature allows user to“unwind” jammed bits.
DW566K / DW562K • Std. Pkg. 1• ReversibleWith Clutch • Heavy Duty 7/8" VSR Three Mode SDSRotary Hammer with Kit Box • 6.9 Amp motor provides high performance and overload protectionHard-hitting hammer mechanism for fast and efficientpenetration • Electro-pneumatic hammer mechanismpermits drilling with less noise, vibration and engagement force than round shank hammerdrillsChipping (Hammer-Only) mode for mortar removalDW562K: Single mode designed specifically for concrete drilling only.
BDE
008
BDE
009
BDE
010
BDE
011
3/4" SDS Drive Rotary HammersNo.
AmpsOptimum Concrete In.Maximum Concrete In.
Capacity Wood Drilling In.Capacity Steel Drilling In.
No Load Speed RPMLoaded Speed RPM
Blows / Min.Impact Energy Ft.-Lb.
Pkg. Wt. Lb. (kg)
DW566K6.9
5/32 – 5/87/811/21/2
0-11500-8200-5800
1.7711.9 (5.4)
No.Amps
Optimum Concrete In.Maximum Concrete In.
Capacity Wood Drilling In.Capacity Steel Drilling In.
No Load Speed RPMLoaded Speed RPM
Blows / Min.Impact Energy Ft.-Lb.
Pkg. Wt. Lb. (kg)
DW567K6.9
5/32 – 5/81
11/21/2
0-11500-8200-5800
1.7711.88 (5.39)
No.Amps
Capacity Std. Core Bit In.Capacity Thin Wall Core Bit In.
Optimum Concrete In.Maximum Concrete In.
No Load Speed RPMLoaded Speed BPM
Impact Energy Ft.-Lb.Length In.
Pkg. Wt. Lb. (kg)
DW530K9.431/2
55/32 – 11/4
11/238030004.317.9
25.45 (11.5)
No.Amps
Capacity Std. Core Bit In.Capacity Thin Wall Core Bit In.
Optimum Concrete In.Maximum Concrete In.
No Load Speed RPMLoaded Speed BPM
Impact Energy Ft.-Lb.Length In.
Pkg. Wt. Lb. (kg)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
91
No.
Amps 120 V
AC OnlySpeed Under
Load BPM CapacityPkg. Wt.Lb. (kg)
DW558K 10.0 1800 Heavy demolition 24.2 (10.98)
Demolition Hammer Kit • Std. Pkg. 1 • Accepts 3⁄4" hex steelBDE
012
Demolition Hammer
Heavy Duty VSR DrywallScrewdriver • Std. Pkg. 1Standard Clutch • Metal gear housing • Depth sensitive “setand forget” nosepiece for consistent fastenerdepth • Rubber grip and two-finger trigger • Helical-cut steel, heat treated steel gears • Lightweight.
Heavy Duty VSR Depth Sensitive Std. Pkg. 1 • Screwdriver StandardClutch • Metal gear housing • Idealfor use with Teks® screws • Depth sensitive “set and forget” nosepiece forconsistent fastener depth • Rubber gripand two-finger trigger • Helical-cutsteel, heat treated steel gears • Alsoavailable in 220V.
Scrugun® Screwdrivers
BDE
013
No.Amps
No Load Speed RPMTorque In.-Lb.
Max. Fastener SizePkg. Wt. Lb. (kg)
DW272 / DW272W / DW272WT6.3
0 – 400081#8
4.15 (1.88)
DW2666.5
0 – 2500132#14
4.15 (1.88)
Drills
No.Chuck Size In.
No Load Speed RpmAmp
Capacity in Steel (Twist Bit) In.Capacity in Steel (Annular Cutter) In.
WattsGear Reduction
Tapping Capacity (in steel) In.Reaming Capacity (in light gauge steel) In.
Reaming Capacity (in heavy gauge steel) In.Pkg. Wt. Lb. (kg)
DW151 • Heavy-Duty 1/2" Magnetic Drill Press • 450 RPMIncludes reversible side handle and 5' safety strap • Drills 5/54 "– 11/4" holes • Push button reversible feed handle offerstool-free handle set-up • Smooth rack and pinion drilling action • Triple gear reduction provides increased torque andreduces gear stress • Twin core magnet provides greater magnetic adhesion • Easy access controls.
DW159 • Heavy-Duty 2" Magnetic Drill / Cutter Press 375 RPM • Includes reversible side handle and 5' safety strap Drills 7/16" – 2" holes • Arbor system provides auto-lubricationand slug ejection • Push button reversible feed handle offerstool-free handle set-up • Triple gear reduction providesincreased torque and reduces gear stress • Magnet rotates 120° to get into tight spaces.
BDE
014
4271 • 5" Straight Grinder
No.
Amps120 VAC/DC
No LoadSpeedRPM
Don't UseWheel Rated Less
Than RPMMax. WheelDiameter In.
Max. WheelThickness In.
ArborDiameter In.
Pkg. Wt.Lb. (kg)
DW880 • 21⁄2" Straight Grinder
Std. Pkg. 1
Straight Grinders
BDE
015
19,0005700
19,0005700
21⁄26
1⁄21
3⁄85⁄8
6.88 (3.12)14.88 (6.75)
DW880DW882
513
DW1511/24506.01/211/4720
Triple1/211/41/2
29.7 (13.5)
DW1592
37510.011/4
21,100Triple
111/41/2
331.2 (14.2)
TM
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS92
DW887DW888
35
25,00019,000
30,00019,000
1/8, 1⁄41⁄4
11⁄22
31⁄4 (1.47)6 (2.72)
BDE
016
Std. Pkg. 1
Die Grinders
No.
Amps120 VAC/DC
No LoadSpeed RPM
Avoid WheelRated LessThan RPM
Collet Size In.
Maximum Wheel
Diameter In.Pkg. Wt. Lb. (kg)
DW888 • 2" Die GrinderDW887 • 11⁄2" Die Grinder
Sanders / Grinders
7" Right-Angle Sander
Small Angle Grinders
DW831 • Std. Pkg. 1 • 5" Angle Grinder: Powerful 10 Amp air-cooled motor for long life andgreater overload protection. Ball and roller bearing construction for long life, efficient operation.
DW402 • Std. Pkg. 1Features:• 7.5 Amp, 10,000 rpm motor provides high
power, overload protection and speed for 41/2" grinding applications
• AC/DC capacity works off welding machines and generators for increased productivity and versatility
• Metal gear case dissipates heat for longer bearing, gear and motor life
• Convenient paddle switch with lock-on button for easier gripping
• 3-position removable side handle for greater comfort and control
• Spindle lock for quick and easy wheel changes • Available in 220V.
Includes:• depressed center wheel • wrench
• backing flange • clamp nut
• guard • 3 position side handle
* 4074 Includes guard.
D28493ND28494SD28474N
15.015.015.0
500060006000
600070007000
977
5⁄8-115⁄8-115⁄8-11
14.5 (6.58)14.5 (6.58)13.5 6.12)
Depressed Center Wheel Guards • Std. Pkg. 1D284937
71.23 (.56)
D284939 9
1.99 (.90)
No.Size In.
Pkg. Wt. Lb. (kg)
BDE
017
BDE
018
Safety Guards for D28474N,D284945 &D28493N
DW402 6 10,000 12,000 41⁄2 5⁄8-11 4.5 (2.04)
DW831 12 10,000 10,850 5 5⁄8-11 7.6 (3.45)
No.
Amps120 VAC/DC
No LoadSpeedRPM
AvoidWheel Rated Less
Than RPMMaximumWheel In.
Spindle Thread
In. Pkg. Wt.Lb. (kg)
No.
Amps120 VAC/DC
No LoadSpeedRPM
AvoidWheel Rated Less
Than RPMMaximumWheel In.
Spindle Thread
In. Pkg. Wt.Lb. (kg)
No.
Amps120 VAC/DC
No LoadSpeedRPM
AvoidWheel Rated
Less ThanRPM
MaximumWheel
In.
Spindle Thread
In. Pkg. Wt.Lb. (kg)
BDE
019
No.Amps120 V
No LoadSpeedRPM
Pad SizeIn.
Spindle Thread
In. Pkg. Wt.Lb. (kg)
DW849DW845
8.0 AC/DC 7.0 AC Only
0-1500⁄30002300
7 or 97 or 9
5⁄8-115⁄8-11
8.25 (3.74)8.60 (3.90)
Polishers
Std. Pkg. 1
DW36415
580071⁄45⁄8
12.33 (5.60)
DW369CSK15
580071⁄45⁄8
9.8 (4.45)
DW368/DW368K15
580071⁄45⁄8
9.5 (4.31)
71⁄4" Heavy Duty 71⁄4" Heavy-Duty 71/4" Heavy-Duty
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
93Bench Grinders
No.
Amps120 V
AC Only
MaximumOutput
HP
No LoadSpeedRPM Dia. Thick Arbor Dia.
Pkg. Wt. Lb. (kg)
DW756DW758
4.24.5
Wheel Size In.BDE
020
Std. Pkg. 1
5⁄83⁄4
34503600
68
3⁄41
1⁄25⁄8
34 (15.42)41.5 (18.82)No. DW758
BDE
023
No. Amps120 V AC only Stroke Length In. High Range Low Range Pkg. Wt. Lb. (kg.)
DW309KDW307MKDW303MK
668
11⁄411⁄411⁄8
0-29000-28000-2400
0-29000-20000-2400
8.4 (3.81)6.9 (3.13)7.3 (2.95)
Std. Pkg. 1 • In Heavy Gauge Steel KIt boxDW309K • Variable Speed Cut-Saw™ Reciprocating Saw KitDW307K • Dual Range Variable Speed Cut-Saw™ Reciprocating Saw KitDW303K • Variable Speed Cut-Saw™ Reciprocating Saw Kit
Cut-Saw™ Reciprocating Saws
Strokes per Minute
BDE
021
BDE
022
Circular Saws
71⁄4" Heavy Duty Framing Saw 81⁄4" Heavy Duty
No.Amps 120 V AC⁄DCNo Load Speed RPM
Blade Diameter In.Arbor, In.
Pkg. Wt. Lb. (kg)
No.Amps 120 V AC⁄DCNo Load Speed RPM
Blade Diameter In.Arbor In.
Pkg. Wt. Lb. (kg)
Std. Pkg. 1
Std. Pkg. 1
DW378G15
460071⁄4
◊13 (5.90)
DW38415
580081⁄45/8
12.75 (5.78)
Variable Speed Orbital Action Jig Saw • Std. Pkg. 1
Jig Saws
BDE
024
DW318G DW318K 4.5 0-3100 1 4 23/8 1/4 3/4 61⁄4 (2.84) 9.0 (4.08)
No. No. Kit
Amps 120 V
AC ⁄DC
Strokes Per
Minute
Stroke Length
In.Orbit
Selections Hardwood Steel Alum Tool Wt.Lb. (kg)
Kit Wt.Lb. (kg)
Std. Pkg. 1 • 14" Chop Saw is a powerful tool with large cutting capacity – it will cut most standarddrywall stud bundles in a single pass. In addition, it features an exclusive quick-locking vise and pivoting fence for making miter cuts.
No.
Amps120 V
AC only
38003800
41004100
1414
11
HP
DW871DW870
1513
39 (17.70)36 (16.33)
5.33.2
Pipe Dia. Bar Dia.
5 29⁄164 21⁄2
Pkg. Wt.Lb. (kg)
BDE
025
Chop Saws
Cutting Capacity In.No Load
SpeedRPM
AvoidWheelRated
Less ThanRPM
Abrasive WheelDia.In. Arbor
Capacity In.
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS94
No.
Amps120 VAC/DC
No LoadSpeedRPM Arbor In.
SpindleThread In.
WheelDiameter In.
Depth ofCut In.
Pkg. Wt. Lb. (kg)
5000 1 5⁄8-11 12 4 26 (11.80)DW866 15
BDE
026
Std. Pkg. 1 • A rugged tool for cutting sheet metal, concrete, cinder block, reinforcing rods (3⁄4" and smaller), 1⁄8" wire mesh, corrugated flooring, ceiling forms, and similar materials.
BDE
027
14 Gauge Swivel Head ShearStd. Pkg. 1
Blades • Std. Pkg. 1
DW890014 Gauge center blade
DW8999Left shear blade
DW8900Right shear blade
No.Description
Std. Pkg. 1 • Professional Palm Grip Sander.
No.
Amps120 V
AC OnlyAbrasive
PaperOrbits Per
MinuteDust
CollectionPkg. Wt. Lb. (kg)
DW411 1.7 41⁄2 x 51⁄2 12,000 – 23⁄10 (1.04)
1/4 Sheet Sanders
BDE
028
BDE
029
Router
DW610 8.0 11⁄2 25000 65158-00 38659-00 6 7.25 (3.29)
Std. Pkg. 1 • 11⁄2 HP Router • 1/4" collet.
No.
Amps120 V
AC Only
MaximumOutput
HP
No LoadSpeedRPM Collet Wrench
BaseDia. In.
Pkg. Wt.Lb. (kg)
Std. Pkg. 1 DW290K • Includes heavy-duty kit box.Heavy Duty 1/2" (13mm) Impact WrenchAC/DC forward/reverse rocker switch Delivers full power; 240 Ft.-Lbs. of torque inforward and reverse • Detent pin for securesocket retention • Externally replaceablebrushes for easy serviceability • Ball-bearingconstruction for increased durabilityDW290 also available in 220V
Heavy-Duty 3/4" Impact WrenchEasy forward or reverse, can run on AC or DC currentBall bearing construction forincreased durability • Hightorque level for heavy duty fastening applications – 434Ft.-Lb. • Externally replaceablebrushes for easy serviceabilityIncludes 360° side handle.
BDE
030
No.Amps
No Load Speed RpmMaximum Torque Ft.-Lb.
Impacts / Min. BpmTool Length In.
Pkg. Wt. Lb. (kg)
Impact Wrenches
DW290 / DW290K / DW2917.5
21002402700107/8
8.8 (3.99)
DW29710.01600434180013
14.25 (6.47)
No.
Amps120 V
AC only No Load
Speed
Min. Cutting
Radius In.Mild Steel
Stainless Steel
Pkg. Wt.Lb. (kg)
DW891 5.0 0-2500 SPM 51⁄2 14 (.0747) 16 (.0598) 5 (2.27)
Capacity (Gauge)
Cut-Off Machine
Shears
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
95Moto-Tool Kits
No.Description
Voltage Pkg. Wt. Lb. (kg)
395Moto-tool
1202 (.91)
DRM
001
DRM
003
Carbide cutters outlast high speed cutters many times over. 1/8" shank with maximum cutting head of 1/8". Use on hardened steel, fired ceramics, and othervery hard materials. Do not run accessories in excess of 30,000 RPM.
99011/8
99031/8
1/8" Shank Tungsten Carbide Cutters • Std. Pkg. 1 • Pkg. Wt. .063 Lb. (.03) (kg)
290 Engraver • Std. Pkg. 1 • A stroke adjustment dial on the tool regulates the engraving depth, fromfine lines to deep grooves. Set the dial at 1 through 3 for soft materials such as wood, leather, glass orplastics. Set the dial at 5 or 6 for a stronger stroke for marking tools, machinery and other hard steel.This tool includes a replaceable carbide steel engraver point. 220 Volt Model No. 292.
Engraver
2901 (.45)
No.Pkg. Wt. Lb. (kg)
9924Carbide replacement point
.063 (.03)
No.Description
Pkg. Wt. Lb. (kg)
Accessories • Std. Pkg. 1
No.Size
Moto-Tool CuttersDRM
002
395 Variable Speed Moto-Tool • Std. Pkg. 1 • Adjustablehigh speed ball bearing motor 5000 - 30,000 RPM. Speedcan be adjusted for any application, any material. Includes1/8" collet, 90962 wrench, 2 each 409 cut-off wheels, 402mandrel, 407 drum sander and 932 aluminum oxide grinding stone.
Industrial Air Tooloffers a huge selection of
cutting tools. Check out theAbrasives & Cutting Tools
section of this catalog.
No.Cylinder
Cap. TonsStroke
In.Oil Cap.Cu. In.
Collapsed Ht. In.
ExtendedHt. In.
Pkg. Wt. Lb. (kg)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS96Hydraulic Cylinders
Single Acting Solid Plunger5 and 100 Ton capacities. These cylinders can be used inmany applications, includingmaintenance, production,fabrication and construction.
RCA-502RCA-506RCA-302RCA-304RCA-504
5050303050
2.006.002.004.004.00
22.0069.0012.9825.9744.18
6.9710.977.169.258.97
8.9716.979.1613.2512.97
21.5 (9.8)31.5 (14.3)
12 (5.4)15.5 (7.1)26.5 (12.1)
Single Acting Solid PlungerAluminum Cylinders50 Ton capacities. The RCA lineof cylinders are ideal for applications where portability is important.
RC-50RC-51RC-53RC-55RC-57RC-59RC-101RC-102RC-104RC-106RC-108RC-1010RC-1012RC-1014RC-151RC-152RC-154RC-156RC-158RC-1510RC-1512RC-1514RC-251RC-252RC-254RC-256RC-258RC-2510RC-2512RC-2514RC-308RC-502RC-504RC-506RC-5013RC-756RC-7513RC-1006RC-10010
55555510101010101010101515151515151515252525252525252530505050507575100100
.631.003.005.007.009.131.002.134.136.138.0010.1312.0014.001.002.004.006.008.0010.0012.0014.001.002.004.006.258.2510.2512.2514.258.252.004.006.2513.256.1313.136.6310.25
.62
.992.984.976.969.072.244.759.2313.717.8922.6526.8431.313.146.2812.5718.8525.1331.4237.7043.985.1610.3120.6332.2342.5552.8663.1873.4953.5622.0944.1869.03146.3497.41208.74136.67211.45
1.634.346.508.5010.7512.753.534.786.759.7511.7513.7515.7517.754.885.887.8810.6912.6914.6916.6918.695.506.508.5010.7512.7514.7516.7518.7515.256.948.9411.1318.1311.2519.3814.0617.69
2.255.349.5013.5017.7521.884.536.9110.8815.8819.7523.8827.7531.755.887.8811.8816.6920.6924.6928.6932.696.508.5012.5017.0021.0025.0029.0033.0023.508.9412.9417.3831.3817.3832.5020.6927.94
2.2 (.10)2.3 (1.04)3.3 (1.50)4.1 (1.86)5.3 (2.40)6.1 (2.77)4 (1.81)
5.1 (2.31)7.2 (3.27)9.8 (4.44)12 (5.44)14 (6.35)15 (6.80)18 (8.16)7.2 (3.27)9 (4.08)11 (4.99)15 (6.80)18 (8.16)21 (9.53)24 (10.89)26 (11.79)13 (5.90)14 (6.35)18 (8.16)22 (9.98)27 (12.25)31 (14.06)36 (16.33)39 (17.69)40 (18.14)33 (14.97)42 (19.05)51 (23.13)83 (37.65)65 (29.48)130 (58.97)130 (58.97)160 (72.57)
Single Acting Solid Plunger
Single Acting Solid Plunger Aluminum Cylinders
Std. Pkg. 1
ENI
001
Oil Cap.Cu. In.
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
97Hydraulic Cylinders (continued)
RCS-101RCS-201RCS-302RCS-502RCS-1002
10203050100
1.501.752.442.382.25
3.407.7015.8022.8044.20
3.473.884.634.815.56
4.975.637.067.197.81
9 (4.08)11 (4.99)15 (6.80)24 (10.89)50 (22.68)
Low Height, Single Acting 10-100 Ton capacities. TheRCS line of cylinders isdesigned for lifting andmaintenance applicationswhere low height, weightand portability are needed.
ENI
002
Low Height, Single Acting Hydraulic Cylinders
No.Cylinder
Cap. TonsStroke
In.Oil Cap.Cu. In.
Collapsed Ht. In.
ExtendedHt. In.
Pkg. Wt. Lb. (kg)
RCH-120RCH-121RCH-1211RCH-123RCH-202RCH-206RCH-302RCH-306RCH-603RCH-606RCH-1003
12121212202030306060100
.311.631.633.002.006.102.506.133.006.003.00
.904.504.508.309.4028.6718.0044.2038.2076.4061.80
2.194.754.757.256.3112.057.0313.009.7512.7510.00
2.506.386.3810.258.3118.119.5319.1312.7518.7513.00
.77
.77
.69
.751.061.061.311.312.102.103.12
3.2 (1.45)6.2 (2.81)6.2 (2.81)9.8 (4.44)17 (7.71)31 (14.0)24 (10.89)48 (21.77)62 (28.12)78 (35.38)203 (92.08)
Single Acting Hollow Plunger12-100 Ton capacities. TheEnerpac Holl-O-Cylinder ®
is extremely versatile foruse in tooling, maintenanceand tensioning applications.
Double Acting Hollow Plunger30-150 Ton capacities. The RRH cylinder lineoffers cylinders ideal forpost-tensioning and pre-stressing applications.
ENI
003
ENI
004
ENI
005
No.CylinderCap.Ton
Stroke In.
Oil Cap.Cu. In.
CollapsedHt. In.
Extended Ht. In.
Ctr. Hole Dia. In.
Pkg. Wt. Lb. (kg)
Flat-Jac®, Single-Acting 5-150 Ton capacities. TheEnerpac Flat-Jac® cylindersare our most compacthydraulic cylinders.
RSM-50RSM-100RSM-200RSM-300RSM-500RSM-750RSM-1000RSM-1500
51020305075100150
.25
.44
.44
.50
.63
.63
.63
.63
.25
.981.943.256.019.9412.2719.17
1.281.692.032.312.633.133.383.94
1.532.132.472.813.253.754.004.50
2.3 (1.04)3.1 (1.41)6.8 (3.08)10 (4.54)15 (6.80)25 (11.34)32 (14.52)58 (26.31)
No.Cylinder
Cap. TonsStroke
In.Oil Cap.Cu. In.
Collapsed Ht. In.
ExtendedHt. In.
Pkg. Wt. Lb. (kg)
Flat-Jac ®, Single-Acting Hydraulic Cylinders
Single Acting Hollow Plunger
Double Acting Hollow Plunger
Std. Pkg. 1
Collapsed Height In.
Extended Ht. In.
CenterHole
Dia. In.Pkg. Wt. Lb. (kg)No.
CylinderCap. Ton
Adv. Ret.Stroke
In.
7.0010.133.506.5010.121.503.006.0010.138.00
3636646464103103103103158
24244242426868686880
RRH-307RRH-3010RRH-603RRH-606RRH-6010RRH-1001RRH-1003RRH-1006RRH-10010RRH-1508
13.0017.009.7512.7517.256.5010.0013.5018.1213.75
20.0027.1313.2519.2527.378.0013.0019.5028.2521.75
1.311.312.122.122.123.123.123.123.123.13
48 (21.77)60 (27.22)62 (28.12)78 (35.38)101 (45.8)85 (38.6)118 (53.5)129 (58.5)203 (92.1)245 (111)
Adv. Ret.
50.5073.1044.5682.74128.8030.9261.85123.60208.50254.00
33.0047.7029.3054.4084.7020.3240.6481.24137.00127.00
ENI
006
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS98
Double Acting Solid Plunger4-25 Ton capacities. The RD series of cylinders are designed for production applications wherefast-cycle operations or long cylinder life is needed.
Double Acting Solid Plunger • Std. Pkg. 1
10-75, and 100-200 Ton capacities. The RR series of hydraulic cylinders are designed for lifting, construction and maintenance applications, as well as industrial production and pressing applications.
RR-1010RR-1012RR-308RR-3014RR-506RR-5013RR-5020RR-756RR-7513RR-1006RR-10013RR-10018RR-1502RR-1506RR-15013RR-15032RR-2006RR-20013
22275594681462229720913527137469188402965265574
8925432144682964631261743391194475135293
10.0012.008.2514.506.1313.1320.136.1313.136.6313.1318.132.256.1313.1332.136.0013.00
111132325555558080103103103153153153153221221
441515171717242448484830747474113113
Adv. Ret. Adv. Ret. No.
Cylinder Cap. Tons Stroke
In.
Oil Cap.Cu. In. Collapsed
Ht. In.Extended
Ht. In. Pkg. Wt. Lb. (kg)
16.1318.0015.2521.6313.0620.0628.8813.6920.6914.0620.6327.067.7215.1922.9443.9416.9423.94
26.1330.0023.5036.1319.1933.1949.0019.8133.8120.6933.7545.199.9621.3136.0676.0622.9436.94
28 (12.7)31 (14.06)40 (18.14)64 (29.03)67 (30.39)115 (52.16)150 (68.04)92 (41.73)150 (68.04)135 (61.24)205 (92.99)260 (117.9)110 (49.9)
205 (92.99)275 (124.7)525 (238.1)325 (127.4)440 (199.6)
Double Acting Solid Plunger
RD-41RD-43RD-46RD-91RD-93RD-96RD-910RD-166RD-1610RD-256RD-2510
.902.404.802.005.5010.8017.9019.6032.2030.7050.30
.401.102.101.103.006.009.9010.4017.0013.4022.00
1.133.136.131.133.136.1310.136.2510.256.2510.25
444999916162525
2225555881111
Adv. Ret. Adv. Ret. No.
Cylinder Cap. Tons Stroke
In.
Oil Cap.Cu. In. Collapsed
Ht. In.Extended
Ht. In. Pkg. Wt. Lb. (kg)
7.319.3112.318.7510.7813.7817.7815.3119.3116.6920.69
8.4412.4418.449.8813.9119.9127.9121.5629.5622.9430.94
4.8 (2.18)6.4 (2.90)9 (4.08)9 (4.08)11 (4.99)14 (6.35)19 (8.62)22 (9.98)29 (13.1536 (16.33)46 (20.87)
Double Acting Solid Plunger
Hydraulic Cylinders (continued)
ENI
007
ENI
008
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
99
Double Acting Solid PlungerStd. Pkg. 1
200-500 Ton capacities. These RR series cylinders are designed for high tonnage applications in lifting,production, construction and maintenance.
RR-20018RR-20024RR-20036RR-20048RR-3006RR-30012RR-30018RR-30024RR-30036RR-30048RR-4006RR-40012RR-40018RR-40024RR-40036RR-40048RR-5006RR-50012RR-50018RR-50024RR-50036RR-50048
79210561584211242685212781704255634085701140171022813420456067813562034271240685424
3965287921056228456684912136818243066129181224183624483787561134151222683024
18.0024.0036.0048.006.0012.0018.0024.0036.0048.006.0012.0018.0024.0036.0048.006.0012.0018.0024.0036.0048.00
221221221221354354354354354354475475475475475475565565565565565565
113113113113188188188188188188254254254254254254314314314314314314
Adv. Ret. Adv. Ret. No.
Cylinder Cap. Tons Stroke
In.
Oil Cap.Cu. In. Collapsed
Ht. In.Extended
Ht. In. Pkg. Wt. Lb. (kg)
30.1336.1348.1360.1319.1325.1331.1337.1349.1361.1321.1927.1933.1939.1951.1963.1922.7528.7534.7540.7552.7564.75
48.1360.1384.13108.1325.1337.1349.1361.1385.13109.1327.1939.1951.1963.1987.19111.1928.7540.7552.7564.7588.75112.75
450 (204)616 (279)845 (383)1065 (483)441 (200)688 (312)850 (386)1034 (469)1385 (628)1720 (780)670 (304)880 (399)1000 (454)1317 (597)1746 (792)2162 (981)953 (437)1300 (590)1500 (680)1800 (816)2210 (1002)2700 (1225)
Double Acting Solid Plunger
Hydraulic Cylinders (continued)
Industrial Air Tool is anauthorized Enerpac serviceand repair center. We also service most any brand ofhydraulic cylinders and pumps.
ENI
009
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS100
Double-Acting High Tonnage Cylinders
Std. Pkg. 1
50-1000 Ton capacities. The CLRG series high tonnage cylinders are ideal for lifting and maintenance applications.
CLRG-502CLRG-504CLRG-506CLRG-508CLRG-5010CLRG-5012CLRG-1002CLRG-1004CLRG-1006CLRG-1008CLRG-10010CLRG-10012CLRG-1502CLRG-1504CLRG-1506CLRG-1508CLRG-15010CLRG-15012CLRG-2002CLRG-2006CLRG-20012CLRG-2502CLRG-2506CLRG-25012CLRG-3002CLRG-3006CLRG-30012CLRG-4002CLRG-4006CLRG-40012CLRG-5002CLRG-5006CLRG-50012CLRG-6002CLRG-6006CLRG-60012CLRG-8002CLRG-8006CLRG-80012CLRG-10002CLRG-10006CLRG-100012
11.8111.8111.8111.8111.8111.8120.5720.5720.5720.5720.5720.5730.7830.7830.7830.7830.78
30.7841.2241.2241.2256.8056.8056.8070.7170.7170.7186.7986.7986.79113.25113.25113.25132.57132.57132.57182.32182.32182.32227.19227.19227.19
5.855.855.855.855.855.859.599.599.599.599.599.5914.96 14.9614.9614.9614.9614.9619.6819.6819.6823.6523.6523.6523.4623.4623.4629.9929.9929.9938.3738.3738.3745.7945.7945.7959.9959.9959.9983.9783.9783.97
23.2546.5069.7593.00116.25139.5040.5081.00121.50162.00202.50242.9960.58121.17181.75242.33302.92363.5081.13243.40486.79111.81335.42670.84139.19417.56835.11170.84512.511025.02222.92668.771337.55260.97782.901565.81358.911076.722153.44447.231341.682683.35
11.5123.0234.5246.0357.5469.0518.8737.7456.6175.4994.36113.2329.4458.8888.32117.76147.20176.6438.74116.23232.4646.56139.69279.3946.18138.55277.1059.03177.09354.1875.54226.61453.2290.13270.39540.79118.09354.28708.57165.29495.87991.75
1.973.945.917.879.8411.811.973.945.917.879.8411.811.973.945.917.879.8411.811.975.9111.811.975.9111.811.975.9111.811.975.9111.811.975.9111.811.975.9111.811.975.9111.811.975.9111.81
505050505050100100100100100100150150150150150150200200200250250250300300300400400400500500500600600600800800800100010001000
595959595959103103103103103103154154154154154154206206206284284284354354354434434434566566566663663663912912912113611361136
Nom. Max. Push Pull Push Pull
6.388.3510.3112.2814.2516.227.169.1311.0913.0615.0317.007.729.6911.6513.6215.5917.568.5012.4418.359.2513.1919.0912.2816.2222.1314.7418.6824.5916.5020.4326.3416.8920.8326.7318.6622.6028.5022.2026.1432.05
44 (19.96)55 (24.95)65 (29.49)76 (34.48)87 (39.47)98 (44.46)62 (28.13)79 (35.84)86 (39.02)99 (44.92) 112 (50.82)115 (52.18)104 (47.19)126 (57.17)148 (67.15)170 (77.13)192 (87.11)214 (97.10)160 (72.60)203 (92.11)
300 (136.12)232 (105.26)311 (141.11)431 (195.60)450 (204.17)556 (252.27)715 (324.41)620 (281.31)790 (358.44)960 (435.57)906 (411.10)
1087 (493.19)1360 (617.06)1089 (494.10)1292 (586.21)1598 (725.05)1675 (759.98)1952 (885.66)2368 (1074.41)2233 (1013.16)2577 (1169.24)3093 (1403.36)
Double Acting Solid Plunger
Hydraulic Cylinders (continued)
No.
Cylinder Cap. Tons Stroke
In.
Cyl. Effective Area Sq. In.
Oil Cap.Cu. In. Collapsed
Ht. In.Pkg. Wt. Lb. (kg)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
101
Std. Pkg. 1 • Flat design for use in confined areas where standard cylinders willnot fit • Lock-nut feature for positive and safe load holding over a long periodof time • ANSI B30.1 design qualification and testing approval ensuresincreased product life and user safety • Single-acting load return • Specialbearing design withstands sideload forces up to 3% of rated cylinder capacitywithout scoring • Overflow port functions as a stroke limiter • CR-400 couplerand dust cap included on all models.
CLP-Series, Pancake Lock Nut Cylinders
ENI
010
CLP-6026067
1.9713.4226.42
33 (14.97)
CLP-10021001141.9722.7544.78
57.2 (25.95)
CLP-16021601791.7735.8563.51
96.8 (43.92)
CLP-20022002211.7744.2778.43
125.4 (56.9)
CLP-25022502841.7756.85100.72
162.8 (73.9)
CLP-40024004341.7786.72153.64
294.8 (133.8)
CLP-50025005661.77
113.25200.63
415.8 (188.7)
No.Cylinder Capacity Tons
Nominal Max.Stroke In.
Cylinder Effective Area Sq. In.Oil Capacity Cu. In.
Pkg. Wt. Lb. (kg)
WR-15 • .75 Ton spread cylinder for long stroke spreadingapplication. Includes CR-400 coupler. Spring return.
A-92 • 1 Ton spreader attachment.Threads on RC series 10 Ton cylin-ders (except RC-101). Cylindersshould be used with A-13 or A-102G saddles. Spring return.
WR-5 • 1 Ton Wedgie®. Usedwhere a small, compact spreader isneeded. Includes CR-400 coupler. Spring return.
ENI
011
No.Cyl. Cap. Ton
Stroke In.Oil Cap. Cu. In.Pkg. Wt. Lb. (kg)
WR-15.75
11.503.91
25 (11.34)
A-921.006.00
–8 (3.63)
WR-5 1.003.50.61
5 (2.27)
Hydraulic Wedgie ® & Spread Cylinders
Std. Pkg. 1
Std. Pkg. 1 • 10,000 PSI • Where portable, hydraulic power is needed, these 10,000 PSI hand pumps getthe job done with the least effort.
Std. Pkg. 1 • 10,000 PSI • For fabrication, maintenance, construction, and industrial use, these 10,000 PSIhand pumps are proven performers.
ENI
012
ENI
013
No.Pump Speed
Res. Cap. Cu. In. Pkg. Wt. Lb. (kg)
P-142Two-speed
20.004.5 (2.04)
P-392Two-speed
55.009 (4.08)
P-202Two-speed
55.007.5 (3.40)
P-141Single20.00
4.5 (2.04)
P-391Single55.00
9 (4.08)
P-39Single40.00
13 (5.90)
P-80Two-speed
134.0028 (12.70)
P-84Two-speed
134.0033 (14.97)
P-462Two-speed
453.0061 (27.67)
P-464Two-speed
453.0061 (27.67)
Hydraulic Hand Pumps
No.Pump Speed
Usable Oil Cap. Cu. In. Pkg. Wt. Lb. (kg)
Need a special lengthhydraulic hose or fitting? Our sales staff can help youfind what you are looking for.
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS102
Std. Pkg. 1Enerpac pump and cylinder sets simplifyordering and ensure thatthe pump and cylinderyou select are properlysized and matched.
Five Basic Set Types
Holl-O-Cylinder®
For pushing and pullingapplications.
Solid Plunger CylinderIncludes the RC series cylinder for maximum versatility in use.
Low Height CylinderIdeal for lifting andmaintenance applica-tions where space isrestricted.
Anchor Bolt TestingSupplied with Holl-O-Cylinder and specialforce gauge for easy testing of anchor bolts.
Concrete Form RemovalWedgie® cylinder provides smooth, controlled hydraulic force for fast removal ofconcrete forms.
Solid Plunger Cylinder • RC Series
Low Height Cylinder • RCS Series
Anchor Belt Testing
S2-75S2-150
1.75
WR-5WR-15
P-142P-392
HC-882HC-913
––
––
13 (5.90)38 (17.24)
SH2-12ASH2-20A
1220
RCH-123RCH-202
P-142P-392
HC-913HC-913
GF-120GF-202
GA-4GA-2
21 (9.53)39 (17.69)
SL2-101SL2-201
*SL2-302SL2-502SL-100A
10203050100
RCS-101RCS-201RCS-302RCS-502RCS-1002
P-392P-392P-392P-392P-80
HC-913HC-913HC-913HC-913HC-913
–––––
–––––
22 (9.98)26 (11.79)31 (14.06)39 (17.69)82 (37.20)
*S2-55*S2-102*S2-106S2-1010S2-154
*S2-156S2-252S2-254
*S2-256S-179S-181S-282
510101015152525252550100
RC-55RC-102RC-106RC-1010RC-154RC-156RC-252RC-254RC-256RC-2514RC-506RC-1006
P-142P-392P-392P-392P-392P-392P-392P-392P-392P-80P-80P-462
HC-882HC-913HC-913HC-913HC-913HC-913HC-913HC-913HC-913HC-913HC-913HC-913
––––––––––––
––––––––––––
11 (4.99)18 (8.16)25 (11.34)26 (11.79)27 (12.25)33 (14.97)32 (14.52)36 (16.33)40 (18.14)72 (32.66)83 (37.65)176 (79.83)
SH2-121SH2-202SH2-202GSH2-302SH2-302GHP-60HP-60G
12202030306060
RCH-121RCH-202RCH-202RCH-302RCH-302RCH-603RCH-603
P-142P-392P-392P-392P-392P-80P-80
H-864HC-913HC-913HC-913HC-913HC-913HC-913
––
GF-813S–
GF-813S–
GF-813S
––
GA-3–
GA-3–
GA-3
14 (6.35)31 (14.06)36 (16.33)40 (18.14)40 (18.14)93 (42.18)96 (43.55)
No.Max. Cap.
Tons
Cylinder Model
No.
Pump Model
No.
Hose Model
No.
GaugeModel
No.
GaugeAdapter
Model No.Pkg. Wt.Lb. (kg)
ENI
014
Holl-O-Cylinder® • RCH Series
* These sets may be purchased with a metalbox at slight additionalcost. When ordering, add suffix B.
Hydraulic Pump and Cylinder Sets
Concrete Form Removal
Submerged PumpsStd. Pkg. 1 5000 & 10,000 PSI
.5 Horsepower Submerged Electrical Motor Rem. = Remote
No.Pressure
Range PSIMotor
Voltage115 /V 50/60 Cycle115 V 50/60 Cycle115 V 50/60 Cycle115 V 50/60 Cycle115 V 50/60 Cycle115 V 50/60 Cycle115 V 50/60 Cycle115 V 50/60 Cycle115 V 50/60 Cycle115 V 50/60 Cycle
Valve TypePump Type3-Way/2-pos. normally open3-Way/3-pos. tandem center4-Way/3-pos. tandem center3-Way/3-pos. tandem center4-Way/3-pos. tandem center3-Way/2-pos. normally open3-Way/3-pos. tandem center4-Way/3-pos. tandem center4-Way/3-pos. tandem center
Dump
PEM1201BPEM1301BPEM1401BPER1301BPER1401BPEJ1201BPEJ1301BPEJ1401BPES1401BPED1001B
10,00010,00010,00010,00010,00010,00010,00010,00010,00010,000
ManualManualManual
Rem. (Solenoid)Rem. (Solenoid)
JogJogJog
Pressure Switch Dump
53 (24.04)53 (24.04)53 (24.04)65 (29.48)65 (29.48)55 (24.95)55 (24.95)55 (24.95)62 (28.12)55 (24.95)
Pkg. Wt. Lb. (kg)
ENI
015
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
103
Hushh Electric PumpsStd. Pkg. 1 • Hushh-Pumps will power most Enerpac hydraulic tools and cylinders inproduction, maintenance, lifting and construction applications • Two stage modelsfor reduced cycle times and improved productivity • 70-79 dBA for quiet in-plantapplications. • Recommended Hushh pump model applications:
DumpDumpVM-2VM-2VM-3VM-3VM-4VM-4VSP-324VSP-324VSP-324VSP-424VSP-424VSP-424
DumpDumpVM-2VM-2VM-3VM-3VM-4VM-4VSP-324VSP-324VSP-324VSP-424VSP-424VSP-424
2.75.32.75.32.75.32.75.32.75.310.62.75.310.6
2.75.32.75.32.75.32.75.32.75.310.62.75.310.6
2.55.02.55.02.55.02.55.02.55.010.02.55.010.0
2.55.02.55.02.55.02.55.02.55.010.02.55.010.0
Valve**ModelNo.
– –– –– –– –
GPEM-3310BS 142 (138)GPEM-3320BS 173 (79)GPEM-3410BS 142 (138)GPEM-3420BS 173 (79)GPER-3310BS 171 (78)GPER-3320BS 202 (92)
– –GPER-3410BS 171 (78)GPER-3420BS –
– 202 (92)
– –– –– –– –– –
GPEM-5320GS 188 (85.3)– –
GPEM-5420GS 188 (85.3)– –
GPER-5320GS 217 (98.5)– –– –
GPER-5420GS 217 (98.5)– –
GPED-3110B 157 (71.2)GPED-3120B 188 (85.3)GPEM-3210B 145 (65.8)GPEM-3220B 176 (80)GPEM-3310B 145 (65.8)GPEM-3320B 176 (80)GPEM-3410B 145 (65.8)GPEM-3420B 176 (80)GPER-3310B 174 (79)GPER-3320B 205 (93)GPER-3340B 269 (122)GPER-3410B 174 (79)GPER-3420B 205 (93)GPER-3440B 269 (122)
– –GPED-5120G 191 (86.7)
– –GPEM-5220G 191 (86.7)
– –GPEM-5320G 191 (86.7)
– –GPEM-5420G 191 (86.7)
– –GPER-5320G 220 (99.8)GPER-5340G 284 (128.9)
– –GPER-5420G 220 (99.8)GPER-5440G 284 (128.9)
Total Useable
Reservoir CapacityGal.
GPED-Series with Dump Valve• Ideal for punching,crimping an cutting• For use when load holding is not required• Push-button control
pendant with 10 Ft. cord controls thevalve and motor.
GPEM-Series with Manual Valve, withoutElectric Box• Ideal choice for mostapplications• Manual valve control,for both single-acting or
double-acting applications• Manual motor control
GPER-Series withSolenoid Valve• Ideal for production andlifting applications• All valves are 3-positionfor Advance / Hold /Retract
• Push-button control pendant with 10 Ft. cord controls the valve.
No.Used with Cylinder
Valve Type
Usable Oil Cap. Cu. In.Pkg. Wt. Lb. (kg)
PUD-1100BSingle-acting
Dump valve for auto-retract of cylinder
12231 (14.06)
PUJ-1200BSingle-acting3-Way, 2-pos.
12227 (12.25)
PUJ-1400BDouble-acting4-Way, 3-pos.
12232 (14.52)
Std. Pkg. 1 • 10,000 PSI • .5 HP Portable Pump • There’s never been an electric pump this light. Yet it’s powerful enough to handle many maintenance, fabrication, construction, and lifting applications.
ENI
016
ENI
017
Electric Pumps
Single Stage Two StageNo. Pkg. Wt. Lb. (kg)
Single Stage Two StageNo. Pkg. Wt. Lb. (kg)
3-Series (1.5 hp)*** • Output Flow Rate at 10,000 PSI: 60 Cu. In3./Min.
Output Flow Rate at 10,000 PSI: 120 Cu. In.3/Min.
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS104
Std. Pkg. 1 • These air pumps are designed for use with single-acting cylinders and tools.
Std. Pkg. 1 • High efficiency cast aluminum air motor • Heavy duty for reservoir for applications in tough environments • Operatingair pressure: 25-125 PSI, enables pump to start at extremely low pressure.
No.Used withCylinder
Usable OilCap. Cu. In.
Pkg. Wt. Lb. (kg)
12 (5.44)18 (8.16)
3680
Valve Function
Advance / Hold / RetractAdvance / Hold / Retract
PA-133PA-1150
Single-actingSingle-acting
Air-Hydraulic Power Pumps
PATG-1102N*PATG-1105NPARG-1102NPARG-1105NPAMG-1402NPAMG-1405N
Single-ActingSingle-ActingSingle-ActingSingle-Acting
Double-ActingDouble-Acting
127230127230127230
18 (8.17)22 (9.98)22 (9.98)26 (11.80)24 (10.89)26 (11.80)
No. Used with CylinderUsable Oil
Capacity Cu. In.Pkg. Wt. Lb. (kg)
ENI
018
ENI
019
Turbo II Air Hydraulic Pump
For applications where highflow and large oil capacitiesare required, and air is theonly available power source.
Heavy-Duty Rubber (Steel Braided) • Std. Pkg. 1Enerpac 10,000 PSI hoses are designed for use with all Enerpac 10,000 PSI pumps and cylinders.Hose is reinforced with 2 layers of braided steel in lengths up to 50 Feet.
H92022
3⁄8" NPTF-M3⁄8" NPTF-M
1.6 (.73)
H92033
3⁄8" NPTF-M3⁄8" NPTF-M
1.9 (.86)
H92066
3⁄8" NPTF-M3⁄8" NPTF-M 2.6 (1.18)
H921010
3⁄8" NPTF-M3⁄8" NPTF-M 3.9 (1.77)
H922020
3⁄8" NPTF-M3⁄8" NPTF-M 8.0 (3.63)
H923030
3⁄8" NPTF-M3⁄8" NPTF-M
13 (5.90)
HC92033
3⁄8" NPTF-MCH-6042.2 (.10)
HC92066
3⁄8" NPTF-MCH-604
3.0 (1.36)
HC921010
3⁄8" NPTF-MCH-604
4.3 (1.95)
HC922020
3⁄8" NPTF-MCH-604
8.3 (3.76)
HC9250C50
CH-604CH-60420 (9.07)
ENI
020
High Pressure Hoses
ENI
021
ENI
022
No.Length Ft.
Hose End (1)Hose End (2)
Pkg. Wt. Lb. (kg)
No.Length Ft.
Hose End (1)Hose End (2)
Pkg. Wt. Lb. (kg)
Usable OilCap. Gals.No.
Used withCylinder
10 Series Air PumpStd. Pkg. 1 • Enerpac 10 Series air pumps provide power in many applications where compressed air is either a convenient powersource or required for safety reasons.
50 (22.68)60 (27.22)50 (22.68)60 (27.22)90 (40.82)136 (61.70)100 (45.36)140 (63.50)
Manual (VM-2)Manual (VM-2)Manual (VM-4)Manual (VM-4)Manual (VM-2)Manual (VM-2)Manual (VM-4)Manual (VM-4)
.72.722525
Advance / retractAdvance / retract
Advance / hold / retractAdvance / hold / retract
Advance / retractAdvance / hold / retractAdvance / hold / retractAdvance / hold / retract
PAM-1021PAM-1022PAM-1041PAM-1042PAM-9208NPAM-9220NPAM-9408NPAM-9420N
Single-actingSingle-acting
Double-actingDouble-actingSingle-actingSingle-acting
Double-actingDouble-acting
Valve Type Valve FunctionPkg. Wt.Lb. (kg)
Modular Air Pump
P = PumpA = Air Motor
M = Manual
9 = 10,000 PSI
N = NPT
08 = 8 Liters (2 Gallons)20 = 20 Liters (5 Gallons)
2 = 3-Way, 2-Pos. (VM-2)4 = 4-Way, 3-Pos. (VM-4)
P A M 9 2 08 N
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
105
No.Capacity
Pkg. Wt. Lb. (kg)
HF-1001 Qt.
2.2 (1.0)
HF-1011 Gal.
7.7 (3.49)
HF-1025 Gal.
40 (18.14)
HF-10455 Gal.
450 (204.12)
ENI
024
ENI
025
* C-604 includes 2 CD-411 Dust Caps.
Hydraulic Couplers
Coupler TypePkg. Wt. Lb. (kg)1 (.45)
.5 (.23)
.3 (.14)
Included with Complete Coupler – May be Ordered Separately
Male orHose Half
Model No.
Female orCyl. Half
Model No.
Male HalfDust Cap
Model No.
Female HalfDust Cap
Model No.CH-604
AH-604
AH-630
CR-400
AR-400
AR-630
CD-411*
–
–
CD-411*
Z-410
Z-640
3⁄8" High Flow
3⁄8" RegularSpee-D-Coupler ®
1⁄4" Regular
Std. Pkg. 1Maximum pump volumetric efficiency • Anti-rust, foaming and sludge additives • Stops oil oxidation.
No.Description
Pkg. Wt. Lb. (kg)
V-82Needle valve designed forcontrolling cylinder speed.
Can also be used for temporary load holding. 3⁄8" NPTF female ports.
2 (.91)
V-182Same as V-8 valve, but with1⁄4" NPTF ports. Can also be
used for manual gauge snubbing.
.8 (.36)
V-8FSimilar to V-8, but hasimproved fine metering capability for precise
flow control.
1.0 (.45)
Needle Valves
ENI
023
C-604
A-604
A-630
No.
Std. Pkg. 1
Enerpac 10,000 PSI couplers simplify hydraulic connectionsand consist of self-sealing male and female halves. Thescrew-type design permits connection or disconnection in seconds.
Hydraulic Oil
Manually Operated Check Valves
No.Description
Pkg. Wt. Lb. (kg)
V-66A manual check valve used for load
holding applications with single-acting and double-acting cylinders
.04 (.02)
V-66FSimilar to V-66F, but has improvedfine-metering capability for precise
flow control.05 (.02)
Std. Pkg. 1 • Enerpac gauges permit visual reading of the pressure generated by the load and minimize overloading of equipment toensure long, dependable service.
Std. Pkg. 1
No.Used with Cylinders,
Jacks and Presses
Type Gauge
Gauge Face Dia In.Thread SizeCalibration
Pkg. Wt. Lb. (kg)
GF-10PAll 10 Ton Cylinders
Pounds total load
41⁄2" NPT
0-20,000 Lb...2 (.09)
GF-20PAll 25 Ton Cylinders
Pounds total load
41⁄2" NPT
0-50,000 Lb...2 (.09)
GF-50PRC-502, 506, 5013,RR-5013 Cylinders
Pounds total load
41⁄2" NPT
0-100,000 Lb...2 (.09)
GP-10SAll
Cylinders
PSI Gauges
41⁄2" NPT
0-10,000 PSI.2 (.09)
No.Used with Cylinders,
Jacks and Presses
Type Gauge
Gauge Face Dia In.Thread SizeCalibration
Pkg. Wt. Lb. (kg)
GP-15SAll
Cylinders
PSI gauges
41⁄2" NPT
0-15,000 PSI
.2 (.09)
GF-200P150-200 Ton
H-Frame presses
PSI/Tons multi-purpose gauges
41⁄4" NPT
0-10,000 PSI0-150 Tons0-200 Tons
1.0 (.45)
GF-813PRCH-202 CylinderRCH-302 CylinderRCH-603 Cylinder
PSI/Tons multi-purpose gauges
41⁄4" NPT
0-10,000 PSI0-20 Tons0-30 Tons0-60 Tons1.0 (.45)
GF-835P25-50 Ton
H-Frame presses
PSI/Tons multi-purpose gauges
41⁄4" NPT
0-10,000 PSI0-25 Tons0-30 Tons0-50 Tons1.4 (.64)
GF-871P75-100 Ton
H-Frame presses
PSI/Tons multi-purpose gauges
41⁄4" NPT
0-10,000 PSI0-75 Tons0-100 Tons
1.4 (.64)
ENI
026
ENI
027
Hydraulic Gauges
Std. Pkg. 1The 35 TonPunch islightweight,easy to handle andmuch fasterthandrilling.Designedfor punch-ing round, square or oblong holesthrough mild steel up to .50" thick.
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS106Gauge Adapters
Std. Pkg. 1 • Enerpac gauge adaptersreceive the gauge and mount into thesystem. Male end threads into pumpand cylinder port; female end acceptshose connection.
No.Gauge Port NPTF
Male End NPTFFemale End NPTF
Length In.Pkg. Wt. Lb. (kg)
GA-11⁄2"3⁄8"3⁄8"
2.81.60 (.27)
GA-21⁄2"3⁄8"3⁄8"
5.50.60 (.27)
GA-31⁄4"3⁄8"3⁄8"
5.25.60 (.27)
GA-41⁄2"1⁄4"3⁄8"
4.38.60 (.27)
ENI
028
ENI
029 SPD-313
SPD-375SPD-438SPD-531SPD-563SPD-688SPD-781SPD-813SPD-458SPD-549SPD-639SPD-728SPD-106SPD-125SPD-188SPD-250
SBD-313SBD-375SBD-438SBD-531SBD-563SBD-688
––––––––––
OOOOOOOOnn
nn
nn
nn
OOOO
SP-313SP-375SP-438SP-531SP-563SP-688SP-781SP-813SP-458SP-549SP-639SP-728SP-106SP-125SP-188SP-250
SD-313SD-375SD-438SD-531SD-563SD-688SD-781SD-813SD-458SD-549SD-639SD-728SD-106SD-125SD-188SD-250
35 Ton Hydraulic Punch
Set Selection Chart
.31 (7.9)
.38 (9.5).44 (11.1).53 (13.5).56 (14.3).69 (17.5).78 (19.8).81 (20.6).31 (7.9).38 (9.5).44 (11.1).50 (12.7)
.31 x .75 (7.9x19)
.38 x .75 (9.5x19).44 x .75 (11.1x19).50 x .75 (12.7x19)
1⁄45⁄16 (8)3⁄8 (10)7⁄16 (12)
1⁄25⁄8 (16)– (18)
3⁄41⁄4
5⁄16 (8)3⁄8 (10)7⁄16 (12)
1⁄45⁄16 (8)3⁄8 (10)7⁄16 (12)
Standard Punch & Die Set
No.
9° Bevel Punch& Die for I
BeamsSet No.
Hole Shape
Standard Punch Model
No.
StandardDie
Model No.
No.Set Type
Capacity TonsPunch & Die Set
PumpHose
Pkg. Wt. Lb. (kg)
SP-35Punch only
––
––
35 (15.88)
SP-35SStandard
35SPD-438 SPD-563 SPD-688SPD-813
––
40 (18.14)
SP-35SPStandard
35SPD-438 SPD-563 SPD-688SPD-813
PUD-1100BHC-913
70 (31.75)
MSP-351Metric
35SPD-375SPD-438 SPD-531SPD-688
––
40 (18.14)
MSP-351PMetric
35SPD-375 SPD-438 SPD-531SPD-688
PUD-1000BHC-913
70 (31.75)
Punch & Die Selection Chart
Hole Size In. (mm)
Bolt Size In. (mm)
50 Ton Hydraulic PunchSet Selection Chart
No.Capacity Tons
Punch & Die Set
Electric PumpHose
Pkg. Wt. Lb. (kg)
SP-5010050
SP-150, SP-170, SP-190SP-121, SP-123
––
255 (115.67)
SP-500050
SP-150, SP-170, SP-190SP-121, SP-123GPER-3410BN
HCT206384 (174.18)
Punch & Die Selection Chart
No.Punch Model No.*
Die Model No.*8° Bevel Die Model No.
Hole Size In.Bolt Size In.
Pkg. Wt. Lb. (kg)
Std. Pkg. 1 The Enerpac 50 Ton Punchcuts the time spent formingholes in thick I-Beams,flanges or structural plates .56" thick mild steel capacity.E
NI
030
* Included inpunch and die set.
SP-150SP-530SD-530
SDB-530 .53.50
1.3 (.59)
SP-170SP-630SD-630
SDB-630 .66.63
1.3 (.59)
SP-190SP-730SD-730
SDB-730 .78.75
1.3 (.59)
SP-121SP-830SD-830
SDB-830 .91.88
1.3 (.59)
SP-123SP-930SD-930
SDB-930 1.031.00
1.3 (.59)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
107
ENI
031
NC-13195
.31-.50
.50-.751.8 (.82)
NCB-1319NC-1319.5 (.23)
NC-192410
.50-.63
.75-.944.4 (2.0)
NCB-1924NC-1924.5 (.23)
NC-243215
.63-.88.94-1.136.6 (2.99)NCB-2432NC-2432.7 (.32)
NC-324120
.88-1.131.25-1.569.7 (4.39)NCB-3241NC-3241.7 (.32)
NC-415035
1.13-1.381.56-2.0018 (8.16)
NCB-4150NC-4150.9 (.41)
NC-506050
1.38-1.502.00-2.2526 (11.79)NCB-5060NC-5060.9 (.41)
No.Capacity TonsBolt Range In.
Hex Nut Range In.Pkg. Wt. Lb. (kg)
Replacement Chisel No.Nut Splitter No.
Pkg. Wt. Lb. (kg)
Hydraulic Nut Splitters
Std. Pkg. 1 • Enerpac Nut Splitters are used to split all grades of nuts up to HRc-44 hardness.
Hydraulic Machine Lifts
ENI
032
SOH-10-68.5
.793.746.69
5.3959.2 (26.86)
SOH-23-620
1.184.337.48
6.1899.2 (45.01)
No.Capacity Tons
MinimumCentral
Maximum
Stroke In.Pkg. Wt. Lb. (kg)
Toe Clearance w/ Cylinder Retracted In.
Std. Pkg. 1 • For lofting heavy equipment with minimum available access • Remote operation of hydraulic pump enhances safety • Low-height lifting toe • Precision guided toreduce friction and isolate cylinder from side-loads • Two extendable support feet provideextra stability • Includes RC Series cylinder CR-400 coupler.
Std. Pkg. 1Lightweight ergonomic design for ease ofuse • Adjustable jaw widths from 2.75" to8.50" for a wide range of applications Single-acting, spring return RC Series cylinders for fast trouble-free operation.
Hydraulic Flange Spreaders
ENI
033
FS-562 x 2.25.75-1.13.13-1.13
51.501.50
26 (11.80)
FS-1092 x 3.63
1.25-1.63.13-1.13
102.134.80
40 (18.15)
No.Max. Flange Thickness In.
Stud Size In.Standard Wedge In.
Capacity TonsStroke In.
Oil Capacity Cu. In.Pkg. Wt. Lb. (kg)
ENI
034
ENI
035
Saf-T-Lite® • Solid Plunger Aluminum
Saf-T-Lite® • Toe Lift Aluminum
JHA-73JHA-156JHA-356JHA-756JHA-1506
7153575150
36.066.136.066.13
5.259.7510.1311.2512.88
–––––
11 (5.0)29 (13.15)40 (18.14)94 (42.64)210 (95.26)
JTA-76JTA-176JTA-356
71735
6.066.136.06
12.5614.1916.63
2.002.002.56
58 (26.31)86 (39)
210 (95.3)
Steel
JH-306JH-506JH-1006
3050100
6.136.096.06
10.0010.2511.31
16.1316.3417.38
59 (26.76)90 (40.82)184 (83.5)
Hydraulic Jacks
Saf-T-Lite® AluminumStd. Pkg. 17-150 Ton capacities Enerpac Saf-T-Lite®
aluminum jacks are ruggedand built for heavy-duty use.
Steel • Std. Pkg. 1 • 1.5-100 Ton capacities Enerpac hydraulic jacks supply high force for many rugged operations.
No.Jack Cap.
TonsStroke
In.Collapsed Height In.
Toe Height In.
Pkg. Wt. Lb. (kg)
No.Jack Cap.
TonsStroke
In.Collapsed Height In.
Toe Height In.
Pkg. Wt. Lb. (kg)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS108
ENI
036
† EBJL15GCEBJ2GC
† EBJL3GCEBJ4GCEBJ6GCEBJ8GCEBJ12GCEBJS12GCEBJ15GCEBJ20GCEBJS20GC
† EBJ30GC† EBJ50GC† EBJ100GC
1.5234681212*152020*3050100
183.7420
4.725.125.516.103.035.916.103.116.894.135.91
21.726.8926.317.688.278.669.456.109.459.846.5011.229.2512.28
39.7213.3946.3115.1616.5417.3218.7010.8318.5019.0911.2218.1113.7818.38
.88
.871.121.111.341.501.701.701.892.092.092.803.354.89
14.1 (6.4)6.6 (3.0)
29.0 (13.2)9.4 (4.3)12.5 (5.7)19.0 (8.6)18.8 (8.5)26.0 (11.8)22.0 (10.0)42.0 (19.1)42.7 (19.4)58.0 (26.3)89.3 (40.5)194.0 (88.0)
Industrial Bottle Jacks • Std. Pkg. 1 • 1.5-100 Ton capacities • 3.03 - 20 In. Stroke • Lower handle effort • Fully serviceable Cast beam and cast pump linkage • Handle included on all models • Safety relief valve to prevent overload • Automatic by-passport to prevent over-extension • Wiper seal for extended life • Chrome plating on pump and ram plungers.
No.
JackCapacity
TonsStroke
In.Minimum Height In.
Maximum Height In.
Plunger Diameter In.
Pkg. Wt. Lb. (kg)
* Short Bottle Jack † Without extension screw
Modular Presses
ENI
037
Features:
Bench Press• Cylinder mounting adapter allows movement to any
position on the rails.• 4 mounting holes in the base for easy mounting to a
fixed surface.
H-Frame Press• Quality welded frame for maximum strength.• Exclusive "Hydra-Lift" bed for effortless adjustment of the
vertical daylight (10 and 12 Ton models are manual).• Roller Head design is standard to allow movement and
locking of the cylinder from side to side (10, 12 and 25 Ton models are manual).
Roll Frame Press• Lateral movement of the cylinder up to 12" left or right of
center allows greater accuracy and flexibility without moving the part.
• Frame rolls easily on 4 steel roller bearings. Frame travel along the bed is: 50 Ton: 40.5 In.
100 Ton: 42.0 In.200 Ton: 57.0 In.
• Hydraulic locks prevent frame movement during pressing operation.
• Exclusive "Hydra-Lift" bed for effortless adjustment of the vertical daylight.
Hydraulic Jacks (continued)
Enerpac hydraulic cylinders are available
in hundreds of different configurations.
Whatever the industrial application…
lifting, pushing, pulling, bending, holding…
whatever the force capacity, stroke length,
or size restrictions…single or double
acting, solid or hollow plunger, you can
be sure Enerpac has the cylinder to suit
your high force application.
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
109
Power Source
H-Frame Presses
Std. Pkg. 1 • Welded frame for maximum strength • “Hydra-Lift” bed for effortless adjustment ofthe vertical daylight (10 ton models are manual) • Roller head design is standard to allow movement and locking of the cylinder from side to side (10 Ton, 25 Ton and 30 Ton are manual).
ENI
038
40.0040.0040.0040.0040.0054.5054.5054.5054.5054.5054.5054.5048.5648.5648.5648.5648.5648.5648.5648.5642.5042.5042.5042.5042.5048.5048.50
18.6318.6318.6318.6318.6329.0029.0029.0029.0029.0029.0029.0028.7528.7528.7528.7528.7528.7528.7528.7535.0035.0035.0035.0035.0048.0048.00
101010101061414141414141366661313131010101361313
0.902.20{4}{2}
2.201.501.105.20{5}
0.601.40{7}
1.001.00{2}{11}2.901.001.00{2}
1.901.90{3}
1.90{3}
2.853.80
6.7013.40{15}{15}
13.4015.407.0030.90{34}
43.009.00{34}
11.1074.00{38}{73}
28.9022.2011.10{38}
41.2020.60{70}
20.60{70}
15.4020.60
––••––––•––•––••–––•––•–•––
•––––••–––•–•–––•–•––•–•–••
–•––•––•–•–––•–––•––•––––––
••••••–•••–•–•••••–••–•–•––
––––––•–––•–•–––––•––•–•–••
•••––••••–––•••••–––•••––––
–––••––––•••–––––•••–––••••
Man. Elec. Air Man. Elec.
Type Valve StrokeIn.
RapidAdvance Pressing
1010101010252525253030305050505050505050100100100100100150200
IPE-1215IPA-1220IPH-1240IPH-1234IPA-1244IPE-2505IPE-2510IPA-2520IPH-2531IPA-3071IPE-3060IPH-3080IPE-5010IPA-5021IPH-5030IPH-5031IPE-5005IPA-5073IPE-5060IPH-5080IPA-10023IPE-10010IPH-10030IPE-10060IPH-10080IPE-15065IPE-20065
No.
Speed Sec./In.
Pkg. Wt. Lb. (kg)
298 (135)160 (73)158 (72)189 (86)163 (74)605 (275)690 (313)610 (277)620 (281)684 (310)717 (325)664 (301)1093 (496)965 (438)968 (439)926 (420)930 (422)1057 (480)1100 (499)1003 (455)1711 (776)1711 (776)1656 (751)1801 (817)1665 (755)3957 (1795)3957 (1795)
PressCap.Tons
Max.VerticalDaylight
In.
Max. Bed
WidthIn.
Cylinder**
ENI
039
Maintenance Sets
Std. Pkg. 1 • These sets are the ultimate in versatility. Maintenance sets become your extra pair of handswhen machinery or equipment breaks down.
No.Pump
Cylinder
No. of AttachmentsPkg. Wt. Lb. (kg)
MS2-4P-142RC-55
3259 (26.76)
MS2-10P-392
RC-106
35140 (63.50)
MS2-20P-392
RC-256
13210 (95.26)
MS2-1020P-392
RC-102, RC-106,RC-256
52350 (158.76)
EP1045
.5 to 54
5.044 (1.81)
EP10610
.5 to 76
6.988 (3.63)
EP10817
.75 to 128
9.2613 (5.90)
EP11020
1 to 159.6710.84
18 (8.16)
EP11330
2.5 to 1812
13.7240 (18.14)
EP11640
3 to 2514
16.2965 (29.48)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS110
Std. Pkg. 1 • Precise hydraulic control allows fast, efficient and safe pulling • High quality, forged steel components provide superiorreliability and service • Available with and without full hydraulic set • Wooden case supplied standard • Hydraulics Include: HandPump • Cylinder • Saddle • Hose • Gauge • Gauge adapter. • Note: BHP-152 includes FZ-1630 adapter.
Std. Pkg. 1 • Supplied with a full hydraulic set including pump, hose, cylinder, gauge andgauge adapter in a wooden case • All master puller sets include a grip puller, a cross bearingpuller, a bearing cup puller and a bearing puller which can be ordered separately • High quality, forged steel components provide superior reliability and service • Sets include speedcrank and adjusting screw for fast contact to work before hydraulics are applied.Hydraulics Include: Hand Pump • Cylinder • Saddle • Hose • Gauge • Gauge adapterPullers Include: Grip puller • Cross bearing puller • Bearing cup puller • Bearing puller Wooden case
Master Puller Sets
Posi Lock® Hydraulic Grip PullersStd. Pkg. 1 • Patented “Safety Cage” jaw retention system • High force hydraulic system for effortless pulling oflarge components • Slim tapered jaws for better gripping in tight spots • Available in 2 and 3 jaw design More efficient pulling, as one man can do the job where normal pullers often require two operators.
ENI
041
ENI
042
Grip Puller Sets
BHP-1752*8
82 (37.21)
BHP-2751G20
198 (89.84)
BHP-3751G30
380 (172.41)
BHP-5751G50
657 (298.09)
No.Capacity Tons
Pkg. Wt. Lb. (kg)
EPHR20810
.75 to 12.082
9.3424 (10.89)
EPHS20810
.75 to 12.082
9.3460 (27.22)
EPHR21015
1.0 to 15.0102
10.6449 (22.23)
EPHS21015
1.0 to 15.0102
10.6485 (38.57)
EPHR21325
2.5 to 18.0122
13.7298 (44.46)
EPHS21325
2.5 to 18.0122
13.72118 (260.1)
No.Capacity Tons
Spread Range In.Max. Reach In.
Number of JawsJaw Length In.
Pkg. Wt. Lb. (kg)
EPHR21650
3.0 to 25.0142
16.29192 (87.11)
EPHR10810
.75 to 12.083
9.3426 (11.8)
EPHS10810
.75 to 12.083
9.3462 (28.13)
EPHR11015
1.0 to 15.0103
10.6452 (23.59)
EPHS11015
1.0 to 15.02103
10.6488 (39.93)
EPHR11325
.5 to 18.0123
13.72106 (48.1)
EPHS11325
.5 to 18.0123
13.72126 (57.2)
EPHR11650
3.0 to 25.0143
16.29202 (91.65)
No.Capacity Tons
Spread Range In.Max. Reach In.
Number of JawsJaw Length In.
Pkg. Wt. Lb. (kg)
BHP-1528
BHP-17629.849.849.929.92
48 (21.78)
BHP-251G20
BHP-25215.7511.8111.819.92
123 (55.81)
BHP-351G30
BHP-35223.3831.5015.2515.25
200 (90.74)
BHP-551G50
BHP-55235.4343.3027.5627.56
353 (160.16)
No.Capacity Tons
Grip Puller No.2 Jaw Max. Spread In.3 Jaw Max. Spread In.2 Jaw Max. Reach In.3 Jaw Max. Reach In.
Set Pkg. Wt. Lb. (kg)
ENI
040
Posi Lock ® Manual PullersStd. Pkg. 1 • Enerpac Posi Lock ® Pullers provide an efficient means to remove gears, bearings, wheels, pulleys,sleeves, and other press fit parts.
No.Capacity Ton
Spread In.Reach In.
Jaw Length In.Pkg. Wt. Lb. (kg)
EP2042
.5 to 54
5.043 (1.36)
EP2066
.5 to 76
6.987 (3.18)
EP20812
.75 to 128
9.2611 (4.99)
EP21014
1 to 159.6710.84
14 (6.35)
EP21325
2.5 to 1812
13.7230 (13.61)
EP21635
3 to 2514
16.2950 (22.68)
No.Capacity Ton
Spread In.Reach In.
Jaw Length In.Pkg. Wt. Lb. (kg)
2 Jaw Puller
3 Jaw Puller
ENI
043
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
111
Hacksaw Accessories
No.Description
Pkg. Wt. Lb. (kg)
9–07–02–001–00–1For pipes up to 6"
4.9 (2.22)
9–07–02–004–00–6For pipes from
4" to 123/4"13.2 (5.99)
9–07–02–003–00–8For profile up to 215/8"
high and 113/8 wide8.0 (3.63)
9–06–06–002–009For saw blades 21"
with clamping device3.7 (1.68)
3–27–14-062–02-3For free
hand working4.4 (1.10)
AccessoriesStd. Pkg. 1
Clamping Devices Saw Blade Guide Support
FIN
002
FIN
001No.
DescriptionStrokes Min.
Pkg. Wt. Lb. (kg)
MOT6-18-2Pneumatic
33015.4 (107.58)
AStx 649Electric
35013 (5.90)
AStxe 649Electric100-35013 (5.90)
Portable HacksawsStd. Pkg. 1 • Have a stroke of 23/8" and will cut pipes up to 24" Diameter without moving the clamp. Larger pipe can be cut by moving the clamping devicearound the pipe. Mitre cuts up to 45° can be made by using the correct clamping device.These tools are ideal for working in restricted spaces and for field pipe maintenance
The AStx 649 and AStxe 649 are double insulated * Electric tools are 110 V/60 Hz 220 V/60 Hz are availableEquipped with: 2 saw blades Z22-6, 1 set of wrenches, 1 coupling 4 11 004 007 (No. MOt 6-18) only.
Electric Benders
Hydraulic Benders
Electric Bender for 1/2" to 2" • Std. Pkg. 1 • Fast, easy way to bend up to 2" conduit. Remote pendant control and bending datacharts for easy, accurate bends. Will make 180° one shot bends in 1/2" thru 2" rigid conduit.
No.
555®
555®R555®-22
DescriptionPowerSource
Pkg. Wt.Lb. (kg)
Power unit without bending accessoriesShoe groups for 1/2"-11/4" IMC conduit & 1/2"-2" Rigid conduit and pipe
50/60 Cycle electric bender power unit w/out bending accessories
120 VAC120 VAC220 VAC
393 (179)280 (127)313 (142)
23816238022633028007
11/2"-2" EMT shoe group for 5551/2"-2" EMT shoe group for 55511/2"-2" IMC shoe group for 5551/2"-2" Rigid shoe group for 555
82 (37.20)155 (70.31)135 (61.24)72 (32.66)
No. Description Pkg. Wt. Lb. (kg)
No.
880880H755880E975880E960
DescriptionPkg. Wt. Lb. (kg)
1", 11/4", 11/2" & 2" Rigid conduit bender w/out hydraulic pump1", 11/4", 11/2" & 2" Rigid conduit bender with 755 hand hydraulic pump
1", 11/4", 11/2" and 2" Rigid conduit bender with 975 electric hydraulic pump1", 11/4", 11/2" and 2" Rigid conduit bender with 960SAPS electric hydraulic pump
113 (52)129 (64)172 (79)205 (93)
No.Description
Pkg. Wt. Lb. (kg)
1802Bending table includes pipe support pins for 884 or 885 benders
180 (81.65)
GRL
001Accessories • Std. Pkg. 1
Rigid Conduit Bender for 1", 11/4", 11/2" & 2" • Std. Pkg. 1 • Portable pin-assembled aluminum components. The frame and ramweigh only 36 Lb. Easy to use ram travel scale and bending charts. Conduit supports index to suit all sizes. Power source: 755 –hand hydraulic pump. 960-120 VAC electric hydraulic pump. 975–120 VAC electric hydraulic pump. 976-22PS–220 VAC 50/60cycle electric hydraulic.
GRL
002
Accessory • Std. Pkg. 1
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS112
GRL
003
No.
777777HC755777E975
777EC960
Description Pkg. Wt. Lb. (kg)
11/4"-2" One shot and 21/2" thru 4" segment, rigid conduit bender w/out hydraulic pump11/4"-2" One shot and 21/2" thru 4" segment, rigid conduit bender w/ 755 hand hydraulic pump
11/4"-2" One shot and 21/2" thru 4" segment, rigid conduit bender w/ 975 electric hydraulic pump11/4"-2" One shot and 21/2" thru 4" segment, rigid conduit bender w/ 960SAPS electric hydraulic pump
164 (75)182 (83)508 (102)256 (117)
Rigid Conduit Bender for 11/4"-2" One Shot 90°s and 21/2"-4" Segment Bending • Std. Pkg. 1Capacity: 11/4"-4" rigid conduit. Portable pin-assembled aluminum components. The frame and ram weighonly 65 Lbs. Easy to use, ram travel scale and bending charts. Conduit supports index to suit all sizes. Power source: 755– Hand hydraulic pump. 960–120 VAC electric hydraulic pump. 975–120 VAC electrichydraulic pump. 976-22PS–220 VAC 50/60 cycle electric hydraulic pump.
No.Description
Pkg. Wt. Lb. (kg)
1802Bending table includes pipe support pins for 884 or 885 benders
180 (81.65)
Accessory • Std. Pkg. 1
Hydraulic Benders (continued)
Hydraulic Pumps
No.
Accessory • Std. Pkg. 1
High Pressure Hydraulic Hand Pump • Std. Pkg. 1
Electric Hydraulic Pump Std. Pkg. 1Usable oil volume 3 Quarts (2.8 Liters).
884884E960884E980
885885E960885E980
Description Pkg. Wt. Lb. (kg)
11/4" thru 4" rigid conduit bender w/out hydraulic pump11/4" thru 4", rigid conduit bender w/ 960SAPS electric hydraulic pump
11/4" thru 4" rigid conduit bender w/ 980 electric hydraulic pump11/4" thru 4" one shot and 5" segment, rigid conduit bender w/out hydraulic pump
11/4" thru 4" one shot and 5" segment, rigid conduit bender w/960SAPS electric hydraulic pump11/4" thru 4" one shot and 5" segment, rigid conduit bender w/980 electric hydraulic pump
416 (189)508 (231)494 (225)449 (204)541 (245)527 (240)
Rigid Conduit Benders for One Shot 90°s in 11/4"-4" and 5" with Segment Bending Shoe • Std. Pkg. 1 Capacity 884: 11/4"-4" rigid conduit. 11/4"-5" rigid conduit. Easy to use ram travel scale and charts for accurate bends. Make elbows, offsets and saddles. To make bending even easier and faster, use with an1802 bending table. power source: 960SAPS – 120 VAC electric powered hydraulic pump. 980 – 120 VACelectric powered hydraulic pump. 980-22PS – 220 VAC 50/60 Cycle electric powered hydraulic pump.
No.Description
Pkg. Wt. Lb. (kg)
No.Capacity
Power SourcePkg. Wt. Lb. (kg)
No.Capacity
Power SourcePkg. Wt. Lb. (kg)
75510,000 PSI (68,950 kPa) .161 In.3 (2.6 cm3) per stroke
Manual – hand20 (9.1)
97510,000 PSI (68,950 kPa); 250 In.3 (4 L) per min. rapid advance;
18 In.3 (.32 L) per min. at full pressure120 VAC 1/2 HP. (.375 kw)
51 (23)
1802Bending table includes pipe support pins for 884 or 885 benders
180 (81.65)
GRL
004
GRL
005
GRL
006
Electric Hydraulic Pump • Std. Pkg. 1 • Usable oil volume 6 Quarts (5.7 Liters).
No.Capacity
Power SourcePkg. Wt. Lb. (kg)
980Electric hydraulic pump
120 VAC 11/2 HP (1.12 kW)71 (32)
980-22PSElectric hydraulic pump w/ pendant switch
220 VAC 50 Hz 11/2 HP (1.12 kW)71 (32)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
113Hydraulic Pumps (continued)
GRL
007
GRL
008
Electric Hydraulic Pump • Usable oil volume 61/4 Quarts (5.9 Liters). Solid state controls. Pendant control for advance, valve onpump for release. Equipped with four swivel casters.
Pump Caster Cart For 975, 976 and 980 Series Pumps.
No.Capacity
Power SourcePkg. Wt. Lb. (kg)
960SAPS10,000 PSI (68,950 kPa); 300 In.3 (4.8 L) Per min. 54 In.3 (.9 L) per min.
120 VAC 11/2 HP (1.12 kW)92 (42)
No.Pkg. Wt. Lb. (kg)
3499110.5 (4.8)
No.Power Source
Pkg. Wt. Lb. (kg)
859-4PVC Plug set 2"-4"
8 (3.63)
309762" PVC Plug
.3 (.14)
3097721/2" PVC Plug
.4 (.18)
309783" PVC Plug
.4 (.18)
309794" PVC Plug
.6 (.27)
Accessories • Std. Pkg. 1
Electric PVC Heater / Bender • Std. Pkg. 1 • For 1/2"-4", all schedules. Easy to use: preheat for 10 minutes, open lid and position PVC, close lid, rotate until pliable, open lid, remove PVCand form bend. Rollers for smooth rotation. Length 52" (132 cm).
No.Power Source
Pkg. Wt. Lb. (kg)
851120 VAC 20 AMP
53 (24)
Electric PVC Heater / Bender
Accessory • Std. Pkg. 1
Driver and SetsQuick Draw™ Hydraulic Punch Driver and Sets (Inch and Metric) 1/2"-2" Conduit Size • Std. Pkg. 1 • Capacity: Standard – .598" (15.2 mm) thru 27/8" (2.914 mm). 1/2"-21/2" conduit. Punch up through 10 Gauge (3.5mm) stainless steel, depending upon individualpunch capacities. • Plastic carrying case • Special step-saver adapter converts standard Greenlee knockout punches through 11/4"
conduit sizes to use 7/16" (11.1 mm) draw stud for one-step punching.7804SB: Driver, 3 draw studs, 2 adapters, 1 spacer.7806SB: Driver, 1/2"-2" Slug-Buster® conduit size punches, dies, 2 draw studs, 1 adapter, 1 spacer.7804E: Metric – Driver, 2 draw studs, 1 adapter, 1 spacer.7804ESB: Metric – Driver, Slug-Buster® Pg punches and dies 15.2 mm-30.5 mm, 2 draw studs, 1 adapter,
1 spacer.
No.Ref. No.
Pkg. Wt. Lb. (kg)
7804SB34292
10 (4.6)
7806SB3384014 (7)
7804E34291
9.4 (4.3)
7804ESB35611
10.3 (4.7)
Quick Draw 90™ Hydraulic Punch Driver and Sets (Inch and Millimeter) 1/2"-2" Conduit Size • Std. Pkg. 1Capacity: Standard – .598" (15.2 mm) thru 27/8" (2.914 mm). 1/2"-21/2" conduit. Punch up through 10 Gauge (3.5mm) stainless steel,depending upon individual punch capacities • Plastic carrying case • Special step-saver adapter converts standard Greenlee knockoutpunches through 11/4" conduit sizes to use 7/16" (11.1 mm) draw stud for one-step punching.
7904SB: Driver, 2 draw studs, 1 adapter, 1 spacer.7906SB: Driver, 1/2"-2" Slug-Buster® conduit size punches, dies, and draw studs.7904E: Metric – Driver, 2 draw studs, 1 adapter, 1 spacer.7904ESB: Metric – Driver, Slug-Buster® Pg punches and dies 15.2 mm-30.5 mm, 2 draw studs,
1 adapter, 1 spacer.7904ISO: Metric – Driver, Slug-Buster® ISO punches 16.2 mm-40.5 mm, 2 draw studs, 1 adapter, 1 spacer.
No.Ref. No.
Pkg. Wt. Lb. (kg)
7904SB33794
10 (4.6)
7906SB3430014 (7)
7904E3429911 (5)
7904ESB3561511 (5)
7904ISO35616
12.2 (5.5)
GRL
009
GRL
010
GRL
011
Ram and Hand Pump Hydraulic Driver and Sets (Inch and Millimeter) • Std. Pkg. 1 • Capacity: Punch up through 10 Gauge (3.5 mm) stainless steel, depending upon individual punch capacities • Punches 10 times faster than wrench method.
7646: Driver with hand pump, plastic case.7306: Driver, hand pump, standard punches, dies and draw studs for 1/2"-2" conduit, plastic case.7310: Driver, hand pump, standard punches, dies and draw studs for 1/2"-4" conduit, metal case.
No.Ref. No.
Pkg. Wt. Lb. (kg)
76461590620 (10)
73061590924 (11)
73101591054 (25)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS114
GRL
012
GRL
013
GRL
014
Fishing Systems592 Mighty Mouser® Fishing System • Std. Pkg. 1 Blow gun kit for 1/2"-4" conduit in metal box. This compact,self-contained Lexan® thermoplastic blow gun holds a 2,150'(655 m) package of 85 Lb. (378 N) breaking strength fish line.
No.Ref. No.
Pkg. Wt. Lb. (kg)
5923256520 (9)
595 32433 7 (3.18)
Accessory
591 Blower Type Power Fishing System • Std. Pkg. 1 The blower, Mighty Mouser® portable blow gun, 1/2"-4" conduit size pistons, hoses, fish line, line packages and 4 adapters fit into a compact, sturdy,steel carrying case.
No.Ref. No.Capacity
Power SourcePkg. Wt. Lb. (kg)
59132432
1/2"-4" Conduit120VAC34 (15.4)
Vacuum / Blower Power Fishing System • Std. Pkg. 1Capacity: 1/2"-4" • Designed for the job site, 10' (305 cm) longhose, large heavy duty wheels and removable accessory box.Complete, includes Mighty Mouser® blow gun, 1/2"-4" conduitsize pistons, hoses, fish line, line packages and 5 adapters. Large11 Gallon (41.6 L) tank makes the 690 excellent for cleaningwater and debris.
No.Ref. No.
Power SourcePkg. Wt. Lb. (kg)
69031339
120 VAC63 (28.6)
595 Mighty Mouser® Fish LineStd. Pkg. 6
No. Ref. No. Pkg. Wt. Lb. (kg)
Conduit Pistons
No.Ref. No.
Conduit Size In.Conduit Type
ColorStd. Pkg.
Pkg. Wt. Lb. (kg)
No.Ref. No.
Conduit Size In.Conduit Type
ColorStd. Pkg.
Pkg. Wt. Lb. (kg)
08263608-5
1/2All
Green5
.1 (.05)
08264 609-5
3/4All
Green5
.3 (.14)
08265 610-5
1All
Green5
.3 (.14)
08266 611-311/4All
Green3
.3 (.14)
08267 612-211/2All
Green2
.3 (.14)
165116132
AllGreen
6.5 (.2)
1651261421/2
IMC, RigidGreen
3.4 (2)
1910762121/2EMT
Yellow1
.2 (.1)
165136153
IMC, RigidGreen
3.7 (.3)
191096223
EMTYellow
1.3 (.14)
1651461631/2
IMC, RigidGreen
3.7 (.3)
2432664631/2EMT
Yellow1
.3 (.14)
165156174
IMC, RigidGreen
3.1 (.05)
191106234
EMTYellow
1.5 (.2)
165176185
AllGreen
1.7 (.3)
169516196
AllGreen
1.8 (.4)
26777S2613
1/2", 3/4", 1", 11/4", 11/2" and 2" EMT, IMC, Rigid.2 (.1)
3431734317
21/2", 3", 31/2" and 4" EMT.9 (.41)
Piston Sets • Std. Pkg. 1
Conduit Pistons • Use with blower or vacuum power fishing system to pioneer the line through the conduit run.
GRL
015
No.Ref. No.
DescriptionPkg. Wt. Lb. (kg)
Cable Pullers2042 Easy Tugger™ Cable Puller • Std. Pkg. 1 • Capacity: Pulling force –2000 Lbs. (8.8 kN) max.; 1400 Lb. (6.2 kN) continuous pulling speed –11 fpm @ 2000 Lb. (3.4 mpm @ 8.8 kN); 22 fpm, @ 1400 Lb. (6.7 mpm@ 6.2 kN) and a one man set-up. Fast pulls up to 22 feet per minute (6.6m). Cable pulling system: Includes 2001 Easy Tugger™ cable puller powerunit, 2049 pipe adapter sheave, 483, 5/8" x 300' (15.9 mm x 91 m) multiplex rope, 644 rope stand and 2448 storage box.
Cable • Std. Pkg. 1
No.Length (m)
Max. Cable Capacity Lb. (kN)Pkg. Wt. Lb. (kg)
31532(91)
2000 (8.9)38.9 (17.69)
31533(182)
2000 (8.9)84 (38.1)
31534(365)
2000 (8.9)161 (73)
29910(91)
2000 (8.9)54 (24.54)
30031(182)
2000 (8.9)114 (51.71)
30039(365)
2000 (8.9)230 (104.3)
For the 2001 Puller Rope Diameter : 5/8" (15.9 mm) Rope Diameter : 3/4" (19.1 mm)
No.Ref. No.
Power SourcePkg. Wt. Lb. (kg)
204232440
120 VAC275 (125)G
RL
016
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
115Cable Pullers (continued)
Super Tugger® Cable Puller • Std. Pkg. 1 • Pull up to 6500 Lbs. (28.9 kN) with less than 27 Lb. (120 N) of operator effort. Forcegauge included to constantly monitor the pull. Right angle sheave allows the operator to stand out of thedirect line of force. Audio alarm high force warning and circuit breaker shut off at maximum force for addedsafety. Tapered capstan and patented rope guidance system for better operator control. Captivated mountingchains and serrated grippers for positive mounting.6001: Super Tugger® Cable Puller Power Unit. Includes force gauge and vise chains.6001-22: Same as 6001 except 220 VAC 50 cycle.6000: Super Tugger® Complete Puller Package. Includes 6001 Super Tugger® cable puller power unit, pipe
adapter sheave, flexible pipe adapter, 12" hook type cable sheave, mobile extension boom, 2",21/2", 3", 31/2", 4" extension bushings, 3/4" x 300' (19.1 mm x 91 m) double braided polyester rope,rope reel stand, floor mount, and steel storage box with casters.
6000-22: Same as 6000 except 220 VAC 50 cycle.6003: Super Tugger® Complete Puller Package. Includes 6001 Super Tugger® cable puller power unit, pipe
adapter sheave, flexible pipe adapter, mobile extension boom, 2", 21/2", 3", 31/2", 4" extensionbushings, floor mount and steel storage box with casters.
6006: Super Tugger® Complete Puller Package. Includes 6001 Super Tugger® cable puller power unit, pipeadapter sheave, flexible pipe adapter, 12" hook type cable sheave, mobile extension boom, 2",21/2", 3", 31/2", 4" extension bushings, 3/4" x 600' (19.1 mm x 182 m) double braided polyesterrope, rope reel stand, floor mount, and steel storage box with casters.
6006-22: Same as 6006 except 220 VAC 50 cycle.
6001119 (53.98)
6001-22119 (53.98)
6003495 (224.5)
6000585 (264.4)
6000-22585 (265.4)
6006673 (305.3)
6006-22673 (305.3)
No.Length (m)
Max. Cable Capacity Lb. (kN)Pkg. Wt. Lb. (kg)
35098(91)
6500 (28.9)82 (39.19)
35100(182)
6500 (28.9)116 (52.62)
35101(365)
6500 (28.9)244 (110.7)
Accessories • Std. Pkg. 1
For the 6001 Puller • Double BraidedComposite Rope for High Force CablePullers • Std. Pkg. 1 Rope Diameter In.3/4 19.1 (mm)
No.Pkg. Wt. Lb. (kg)
GRL
017
GRL
018
Feeding Sheaves • Std. Pkg. 1Capacity: Pulling force up to 6500 Lb. (28.9 kN) • Yokeframe slides into the end of conduit and holds sheaveallowing the cable being fed into the conduit to smoothlyroll over the sheave. 5" (127 mm) wide aluminum alloysheave with self-lubricating bearings.
Rope & Pay-Out ReelStd. Pkg. 1 • Capacity: 720 Lb. (3.2 kN) Averagebreaking strength. Use to hand pull wire or cable. Light enough to be vacuumed or blown into the conduit run with a power fishing system. Can bepulled into the run along with cable or wire and leftfor future additions to the run.
GRL
019
GRL
020
GRL
021
GRL
023
SheavesHook Type • Std. Pkg. 1 • Capacity: Pulling force – 4,000 Lb. (17.8 kN)Cast steel closure type hooks with 1" (25.4 mm) opening. 5" (127 mm) widealuminum alloy sheaves with self-lubricating bearings. • 651: 12" (304.8 mm) diameter hook sheave with 35/16" (84.1 mm) minimum radius. • 652: 18" (457.2 mm) diameter hook sheave with 7" (177.8 mm) minimum radius.
No.Ref. No.
Pkg. Wt. Lb. (kg)
65115325
15 (6.8)
65215326
25 (11.3)
No.Ref. No.
For Conduit Size In.Pkg. Wt. Lb. (kg)
441-230183
29.9 (4.5)
441-330188
314 (6.4)
441-430347
419 (8.6)
6072 12' (3.5 m) Manhole Sheaves • Std. Pkg. 1 • Adjustable, a full range of sheave pinpositions over the frame length to make it possible to configure tothe application. 18" (457.2 mm) diameter aluminum alloy sheaveswith 7" (177.8 mm) minimum radius and 5" (127 mm) width.
No.Ref. No.
Capacity Lb. (kn)Pkg. Wt. Lb. (kg)
607231395
6500 (28.9 kN)190 (86.2)
No.Ref. No.
Size In. (mm)Pkg. Wt. Lb. (kg)
65815332
12 (304.8) Long11 (5)
65919094
22 (558.8) Long17 (7.7)
Tray-Type Sheaves • Std. Pkg. 1 Capacity: Pulling force up to 6500 Lb.(28.9 kN) • Helps roll and guide traypulls. 5" (127 mm) wide aluminum alloysheaves with self-lubricating bearings.
No.Ref. No.
Description
Pkg. Wt. Lb. (kg)
GRL
022
40521546Reel stand
5.2 (2.4)
40921468
Polypro rope 3/16" (4.8 mm) x 600' (182 m)
5 (2.3)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS116
GRL
024
GRL
025
No.Ref. No.
For Tray Width In. (mm)Capacity In. (mm)Pkg. Wt. Lb. (kg)
2018S27383
12-18 (304-457)65/16 (160.3)
8 (3.6)
2024S27384
20-24 (508-609)121/2 (317.5)
10 (4.5)
2030S27386
24 -30 (609-762)1811/16 (475)
13 (5.9)
2036S27387
30-36 (762-914)247/8 (631.8)
15 (6.8)
2018R27388
12-18 (304-457)11 (5)
2024R27389
20-24 (508-609)12 (5.4)
2030R27390
24-30 (609-762)13 (5.9)
2036R27391
30-36 (762-914)14 (6.3)
Straight Cable Rollers • Std. Pkg. 1 • Individual ball bearing rollers. Adjustment slots and universal mounting brackets.
Radius Cable Rollers • Std. Pkg. 1Individual ball bearing rollers. Adjustment slots and universal mounting brackets.
No.Ref. No.
For Tray Width In. (mm)Pkg. Wt. Lb. (kg)
Rollers
SwivelsSwivels • Std. Pkg. 1 • Allows the cable to twist, helps eliminate winding and tangling of rope andcable during pull. Connects grip and pulling rope.
No.Pulling Swivel Dia. In. (mm)
Capacity Lb. (kN)Pkg. Wt. Lb. (kg)
391067/8 x 31/2 (22.2 x 88.9)
2500 (11.1).4 (.18)
3910711/4 x 41/8 (31.8 x 104.5)
5000 (22.2)1 (.45)
3910915/8 x 57/16 (41.3 x 138.1)
10,000 (44.4)2 (.91)
GRL
026
No.Description
CapacityPkg. Wt. Lb. (kg)
1989500 MCM (240 mm2) Dieless crimper w/pressure test kit and metal carrying case
copper - 4 AWG - 500 MCM (25 - 240 mm2) aluminum - 6 AWG - 500 MCM (16 - 240 mm2)29 (13.2)
No.Description
Pkg. Wt. Lb. (kg)
36202Replacement pressure test kit for 1989 includes 30 test slugs and gauge
2 (.91)
Accessories • Std. Pkg. 1
Hydraulic Crimpers
Dieless Crimper to 1000 MCM (500 mm2) • Std. Pkg. 1Dieless crimping head, no dies to lose or replace. Seven indent profile requires fewer crimps per connector. Swivelhead rotates 180 degrees for maximum flexibility. Automatic two speed pump for rapid advance. UL Classified and CSACertified for use with Ilsco, Blackburn®, Burndy™, Anderson, Penn-Union and T&B compression connectors.
No.Description
Pkg. Wt. Lb. (kg)
19901000 MCM (500mm2) Dieless crimper w/ pressure test kit and metal carrying case
Copper - 4 AWG - 1000 MCM (25 - 500 mm2); aluminum - 6 AWG - 1000 MCM (16 - 500 mm2)31 (14.1)
32891Replacement pressure test kit for 1990 includes 30 test slugs and gauge
2 (.91)
Accessories • Std. Pkg. 1
GRL
027
GRL
028
Dieless Crimper to 500 MCM (240 mm2) • Std. Pkg. 1 • Dieless crimping head, no dies to lose or replace. Sevenindent profile requires fewer crimps per connector. Automatic two speed pump for rapid advance. UL Classified andCSA Certified for use with Anderson, Blackburn®, Burndy™, Ilsco and T&B connectors.
No.Description
Pkg. Wt. Lb. (kg)
JAC
001
Ball Bearing Super Chucks
No.Capacity In.
Mount JacobsKey No.
Pkg. Wt. Lb. (kg)
302090 - 1/4 (1)
2JTK30
.63 (.29)
302150 -3/8 (1)
2JTK32
1.19 (.54)
302210 - 1/2 (1)
3JTK3
2.38 (1.08)
302271/8 - 5/8
3JTK4
2.94 (1.33)
302331/8 - 3/4
4JTK4
4.13 (1.87)
302393/8 - 1
5JTK5
6.25 (2.84)
Std. Pkg. 1 • The Jacobs® Ball Bearing Super Chuck is specifically engineered for heavy-duty, close tolerance production drilling. (1) Minimum capacity will hold a No. 70 (.028 In. /.711 mm) drill.
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
117
JAC
002
JAC
003
JAC
004
JAC
005
JAC
006
Plain Bearing Chucks
No.Ref. No.
Capacity In.Mount Jacobs
Key No.Pkg. Wt. Lb. (kg)
No.Ref. No.
Capacity In.Mount Jacobs
Key No.Pkg. Wt. Lb. (kg)
62233A
1/8 - 5/83JTK3
2 (.91)
62283KD (2)1/8 - 5/8
3JTK3
2.06 (.93)
62303PD (3)1/8 - 5/8
3JTK3
2.06 (.93)
1444234-02
0 - 1/2 (1)2JTK3
1.44 (.65)
629534-06
0 - 1/2 (1)6JTK3
1.5 (.68)
1444534-33
0 - 1/2 (1)33JTK3
1.44 (.65)
1445134-33C (4)0 - 1/2 (1)
33JTK3C
1.63 (.74)
630936
3/16 - 3/43JTK4
2.8 (1.27)
1486536KD (2)3/16 - 3/4
3JTK4
2.75 (1.25)
1486636PD (3)3/16 - 3/4
3JTK4
2.8 (1.27)
Taper Mounted Heavy-Duty Model • Std. Pkg. 1 The Jacobs® Plain Bearing Chuck is the world's most widely used for medium or heavy-duty portable,bench or floor mounted power tools. (1) Minimum capacity will hold a No. 70 (.028 In. /.711 mm) drill. (2) Equipped with positive drive slot. (3) Equipped with pin-type positive drive. (4) Equipped with locking collar.
No.Ref. No.
Capacity In.Mount Thread
Key No.Pkg. Wt. Lb. (kg)
62323B 5/8
1/8 - 5/85/8 - 16
K32 (.91)
62557BA 3/80 - 1/4
3/8 - 24K7
.44 (.20)
885932BA 1/2
0 - 3/81/2 - 20
K32.88 (.40)
1472335B 1/25/32 - 5/81/2 - 20
K31.56 (.71)
631636B 3/43/16 - 3/43/4 - 16
K42.88 (1.31)
631436B 5/83/16 - 3/45/8 - 16
K42.88 (1.31)
Thread Mounted Heavy-Duty Model • Std. Pkg. 1
No.Ref. No.
Capacity In. Mount Thread
Key No.Pkg. Wt. Lb. (kg)
6204OB 5/160 - .1565/16 - 24
K0.13 (.06)
62081B 3/80 - 1/43/8 - 24
K1.31 (.14)
62192BA 3/80 - 1/43/8 - 24
K2.81 (.37)
3109041BA 1/20 - .3751/2 - 20
K30.5 (.23)
3113831BA 3/8-S
0 - .3753/8 - 24
K30.5 (.23)
3072831BA 3/8-F
0 - .3753/8 - 24
K30.5 (.23)
628733BA 1/2
0 - 1/21/2 - 20
K321.06 (.48)
628333BA 3/8
0 - 1/23/8 - 24
K321.06 (.48)
628933BA 5/8
0 - 1/25/8 - 16
K321.06 (.48)
Thread Mounted Medium-Duty Model • Std. Pkg. 1
High Precision Model No.
Ref. No. Capacity In.
Mount JacobsPkg. Wt. Lb. (kg)
967980-J2S0 - 5/16
J2S.88 (.40)
9681100-J2
0 - 25/64J2
1.38 (.63)
9680100-J330 - 25/64
J331.38 (.63)
9683130-J2
1/32 - 1/2J2
2 (.91)
9682130-J331/32 - 1/2
J332 (.91)
9684130-J6
1/32 - 1/2J6
2 (.91)
9685160-J6
1/64 - 5/8J6
2.63 (1.19)
Industrial Keyless Chucks
No.Ref. No.
Capacity In. Mount Jacobs
Pkg. Wt. Lb. (kg)
3052680-J2S0 - 5/16
J2S.88 (.40)
30527130-J20 - 1/2
J22 (.91)
30528130-J330 - 1/2
J332 (.91)
30529130-J60 - 1/2
J62 (.91)
30530160-J6
1/64 - 5/8J6
2.63 (1.19)
High Torque/High Precision Model • Std. Pkg. 1 • Certified and guaranteed in writing to .0016" TIR or better. Furnished with milled wrench flats and spanner wrench to allow the application of supplementary gripping torque.
Std. Pkg. 1 • Jacobs® Industrial Keyless Chucks are high precision devices specifically designed for high accuracyapplications on either conventional or CNC equipment. Certified and guaranteed in writing to .0016" TIR or better.
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS118
JAC
007
Tap Chucks
No.Ref. No.
Capacity In. Mount Style
Available Rubber-Flex® Collets **Pkg. Wt. Lb. (kg)
1412141-010 - 1/41JT*
J112, J113, J114.13 (.06)
1412342-01
#10 - 5/161JT*
J420, J421, J422.38 (.17)
1412542-02
#10 - 5/162 short JT*
J420, J421, J422.31 (.14)
Std. Pkg. 1 • Designed for use with the versatile Jacobs Rubber-Flex® Collet which accepts and precisely centers both decimal andmetric shank diameters.*
*Jacobs taper **Not included, must be ordered separately.
No.Ref. No.
Capacity In. Mount Style
Available Rubber-Flex® Collets **Pkg. Wt. Lb. (kg)
1412942-24
#10 - 5/16.3675 Dia.
J420, J421, J422.38 (.17)
1412742-J80 - 1/4
.375 Sq. holeJ420, J421, J422
.38 (.17)
1413144-02
5/16 - 5/82JT*
J440, J441, J443.75 (.34)
1413344-06
5/16 - 5/86JT*
J440, J441, J443.75 (.34)
1413544-J9
#10 - 1/2.500 Sq. hole
J440, J441, J443.75 (.34)
Drill Sleeves
No.Ref. No.
Outside Morse Taper No.Inside Morse Taper No.
Length In. (mm)Pkg. Wt. Lb. (kg)
No.Ref. No.
Outside Morse Taper No.Inside Morse Taper No.
Length In. (mm)Pkg. Wt. Lb. (kg)
3042161010
2.56 (65).06 (.03)
3042262121
3.62 (92).13 (.06)
3042363232
4.38 (111).31 (.14)
3042463131
3.88 (98).38 (.17)
3042564343
5.50 (140).81 (.37)
3042664242
4.88 (124).88 (.40)
3042764141
4.88 (124)1.06 (.48)
3063865151
6.12 (156)2.94 (1.33)
3042865454
6.69 (170)2.19 (1.0)
3042965353
6.12 (156)2.56 (1.16)
3043065252
6.12 (156)2.88 (1.31)
3063966464
8.56 (217)5.5 (2.49)
3043166565
8.56 (2.17)5.63 (2.55)
Drill Sleeves • Morse Taper • Std Pkg. 1 • Adapt smaller Morse taper shank tools to larger machine spindles. Oil toughened and externally precision ground with hardened tang.
JAC
008
JAC
009
JAC
010
Extension Sockets
No.Ref. No.
Outside Morse Taper No.Inside Morse Taper No.Overall Length In. (mm)
Pkg. Wt. Lb. (kg)
No.Ref. No.
Outside Morse Taper No.Inside Morse Taper No.Overall Length In. (mm)
Pkg. Wt. Lb. (kg)
3044381111
5.71 (1.45).31 (.17)
3044481212
6.30 (160).88 (.40)
3044582121
6.30 (160).57 (.26)
3044682222
6.89 (175)1 (.45)
3044782323
7.72 (196)1.5 (.68)
3044883131
6.89 (175).88 (.40)
3044983232
7.64 (194)1.44 (.65)
3045083333
8.46 (215)1.88 (.85)
3045183434
9.45 (240)3.44 (1.56)
3064084242
8.46 (215)2.56 (1.16)
3045284343
9.45 (240)2.63 (1.19)
3045384444
10.4 (265)4.06 (1.84)
3045484545
11.8 (300)4.75 (2.15)
3064185353
10.4 (263)6.25 (2.83)
3045585454
11.8 (300)6.38 (2.89)
3045685555
13.2 (335)4.75 (2.15)
Extension Sockets • Morse Taper • Std. Pkg. 1 • Extend tool lengths and application distances while adapting for increases or decreases in applied tool Morse taper sizes. Externally precision ground with hardened tang.
Drill Drifts
No.Ref. No.
For Ejection OfPkg. Wt. Lb. (kg)
30484900
No. 0 Morse taper.06 (.03)
30485902
Nos. 1 & 2 Morse tapers.19 (.09)
30486903
Nos. 3 & 4 Morse tapers.38 (.17)
Ejecting Drifts • Std. Pkg. 1 • Hardened and tempered.
No.Ref. No.
For Ejection Of
Pkg. Wt. Lb. (kg)
30487904
Nos. 4 & 5 Morse tapers
.75 (.34)
30488906
No. 6 Morse tapers
1.31 (.59)
30489914
Combined drifts Nos. 1,2,3, and 4 inclusive
.63 (.29)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
119ArborsMorse Taper to Jacobs Taper • Std. Pkg. 1 Precision machined and ground to master gages for maximum performance with Jacobs® drill and tap chucks.
No.Ref. No.
DescriptionLength In. (mm)
Pkg. Wt. Lb. (kg)
7299A0101
1 Morse x 1JT3.38 (85.7).13 (.06)
7300A0102
1 Morse x 2JT3.59 (91.3).13 (.06)
7303A0106
1 Morse x 6JT3.72 (94.5)
.25 (.11)
7304A0133
1 Morse x 33JT3.72 (94.5).19 (.09)
7306A0201
2 Morse x 1JT3.94 (100.0)
.25 (.11)
No.Ref. No.
DescriptionLength In. (mm)
Pkg. Wt. Lb. (kg)
No.Ref. No.
DescriptionLength In. (mm)
Pkg. Wt. Lb. (kg)
No.Ref. No.
DescriptionLength In. (mm)
Pkg. Wt. Lb. (kg)
7307A0202
2 Morse x 2JT4.16 (105.6)
.31 (.14)
7308A0203
2 Morse x 3JT4.50 (114.3)
.44 (.20)
7309A0204
2 Morse x 4JT4.94 (125.4)
.75 (.34)
7311A0206
2 Morse x 6JT4.28 (108.7)
.31 (.14)
7312A0233
2 Morse x 33JT4.28 (108.7)
.31 (.14)
7313A0301
3 Morse x 1JT4.69 (119.1)
.63 (.29)
7314A0302
3 Morse x 2JT4.94 (125.4)
.63 (.29)
Straight Shank to Jacobs Taper • Std. Pkg. 1 No.Ref. No.
DescriptionLength In. (mm)
Pkg. Wt. Lb. (kg)
No.Ref. No.
DescriptionLength In. (mm)
Pkg. Wt. Lb. (kg)
No.Ref. No.
DescriptionLength In. (mm)
Pkg. Wt. Lb. (kg)
7348A4000
1/2" x 0JT3.094 (78.6)
.13 (.06)
7349A4001
1/2" x 1JT3.312 (84.1)
.13 (.06)
7350A4002
1/2" x 2JT3.531 (89.7)
.13 (.06)
7351A4003
1/2" x 3JT3.875 (98.4)
.25 (.11)
7353A4006
1/2" x 6JT3.656 (92.9)
.25 (.11)
7354A4033
1/2" x 33JT3.656 (92.9)
.25 (.11)
7355A4101
5/8" x 1JT3.312 (84.1)
.25 (.11)
7356A4102
5/8" x 2JT3.531 (89.7)
.31 (.14)
7357A4103
5/8" x 3JT3.875 (98.4)
.38 (.17)
7359A4106
5/8" x 6JT3.656 (92.9)
.31 (.14)
7360A4133
5/8" x 33JT3.656 (92.9)
.31 (.14)
7361A4202
3/4" x 2JT4.031 (102.4)
.38 (.17)
7362A4203
3/4" x 3JT4.375 (111.1)
.44 (.20)
7364A4206
3/4" x 6JT4.156 (105.6)
.38 (.17)
7365A4233
3/4" x 33JT4.156 (105.6)
.38 (.17)
7367A43031" x 3JT
4.375 (111.1).69 (.31)
7368A43061" x 6JT
4.156 (105.6).63 (.29)
7315A0303
3 Morse x 3JT5.27 (133.8)
.75 (.34)
7316A0304
3 Morse x 4JT5.70 (144.9)1.06 (.48)
7317A0305
3 Morse x 5JT5.94 (150.8)1.44 (.65)
7318A0306
3 Morse x 6JT5.06 (128.6)
.69 (.31)
7319A0333
3 Morse x 33JT5.06 (128.6)
.69 (.31)
7320A0402
4 Morse x 2JT5.91 (150.0)13.1 (.59)
7321A0403
4 Morse x 3JT6.25 (158.8)1.44 (.65)
7322A0404
4 Morse x 4JT6.69 (169.9)1.88 (.85)
7323A0405
4 Morse x 5JT6.91 (175.4)2.19 (1.0)
7324A0406
4 Morse x 6JT6.03 (153.2)1.31 (.59)
7325A0433
4 Morse x 33JT6.06 (154.0)1.38 (.63)
7327A0503
5 Morse x 3JT7.50 (190.5)3.31 (1.50)
7328A0504
5 Morse x 4JT7.94 (201.6)3.63 (1.65)
7329A0505
5 Morse x 5JT8.16 (207.2)4.06 (1.84)
Threaded Shank to Morse Taper • Std. Pkg. 1
No.Ref. No.
DescriptionOverall Length In. (mm)
Threaded Extension In. (mm)Pkg. Wt. Lb. (kg)
7345A0261
2 Morse 3/8" x 243.69 (93.7).56 (14.3).25 (.11)
7346A0264
2 Morse 1/2" x 204.06 (103.2).56 (14.3).31 (.14)
7347A0268
2 Morse 5/8" x 164.19 (106.4).69 (17.5).31 (.14)
Bridgeport Taper to Jacobs Taper • Std. Pkg. 1
No.Ref. No.
Mount JacobsOverall Max. Length In. (mm)
Maximum Dia. In. (mm)Pkg. Wt. Lb. (kg)
7339A0802
2JT5.20 (132.2).49 (12.4)
1 (.45)
7340A0803
3JT5.55 (140.9).75 (19.0)1.06 (.48)
7342A0806
6JT5.33 (135.4).63 (15.9)
1 (.45)
7343A083333JT
5.33 (135.4).56 (14.3)
1 (.45)
JAC
011
JAC
012
JAC
013
JAC
014
1902016 minimum (406.4)
6 (152.4) at Max. pointMax. 8 (203.2) w/ pipe handle 111/2 (292.1)
1.250.750
31/16 x 63/8120 V AC, 60 Hz, 6 Amp speed - 450 RPMDrill point breakaway 650 Lb. (294 kilos)
Dead lift 1440 Lb. (653.18 Kilos) minimum.3/4" (19.05)
11/16" Diameter (27)2" (50) maximum
5/64" to 1/2" Diameter (2 - 13) No. 7059824 (10.89)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS120
JEC
001
JEC
002
Sluggers Jancy Engineering
120 / 220 Volt No.Height In.Width In.Length In.
Drill Motor 2-Speed
Magnet Dead LiftArbor Bore In.
Hole Capacity In.Depth of Cut In.
Twist Drill Capacity w/ Chuck and AdapterPkg. Wt. Lb. (kg)
18066201/4 Down, 24 up
8103/4
120 V Single phase, 12.2 Amp, 1400 Watts load speed- 250/560 RPM
3150 Lb. on 1" Plate, magnet base is 4" x 711/16"3/4"
21/16" Diameter3" Standard
3/16" - 3/4", 37/8" Stroke/5" from chuck face to material44 (19.96)
JM-5000 Slugger • Std. Pkg. 1 • Design Features: Positive slug ejection ensures slug will not stay in cutter after the cut • Internallubrication of cutters increase cutter tool life • Internal coolant reservoir placed inside machine frame • One-piece steel hub shaftassembly can be reversed for right-or left-hand convenience. Safety Features: Completely double-insulated machine • Safety chain included with every machine • Impulse switch turns motor offif excessive movement is detected while drilling, protecting operator and machine.
No.Height In. (mm)Width In. (mm) Length In. (mm)
C/L Pilot to Motor FaceC/L Pilot to Magnet Face
Magnet Base In.Drill Motor
MagnetOn 1" Plate
Arbor Bore In. (mm)Hole Capacity In. (mm)
Depth of Cut In. (mm)Twist Drill Capacity w/ Chuck and Adapter In. (mm)
Pkg. Wt. Lb. (kg)
JEC
003
JEC
004
No.Height In. (mm) Width In. (mm)
Length In. (mm)Drill Motor
Magnet On 1" Plate
Arbor Bore In. Hole Capacity In.
Depth of Cut In. (mm)Pkg. Wt. Lb. (kg)
200026.25 (158.8)75/8 (193.7)123/8 (314.3)
Pneumatic 90 psi / 18 cfm / 500 RPMBarge 33/16 x 73/16
Dead lift 550 Lb. minimum1/2
11/16 Diameter3/4 Standard (51)
63 (28.58)
70598JM-101
1/21.26 (.57)
10215-1/2All but JM-101
1/21.26 (.57)
10215-3/4All but JM-101, JM-500
3/41.26 (.57)
JM-20001 Air Operated Std. Pkg. 1
Chuck and Adapter Accessories • Std. Pkg. 1
No.For Use With Models
Drill Capacity In. Pkg. Wt. Lb. (kg)
JM-101 Little Slugger • Std. Pkg. 1 • Will cut up to11/16" Diameter holes in carbon steel two inches thickin seconds. Heavy-duty enough to convert into a magnetic drill press accepting twist drills up to halfinch in diameter. The rugged cast aluminum frame andcompact 16 inch overallheight is ideal for steel fabricators who have holes tocut in hard to get at places.Features: Rugged cast aluminum frame • Compactsize and light weight allowfor a wide range of applications • Self-lubricating Teflon ways Operates in any position Internal lubrication of cutters through arbor reservoir.
0502-230-11000-3602201.39.12
12.80 (5.81)
0512-210-15000-4502802.09.12
13 (5.90)
0511-210-15000-4503502.011
13.75 (6.24)
0613-240-17000-5003502.0
11.2511.7 (5.31)
0614-240-17000-5004602.0
10.8712.8 (5.81)
0616-240-17000-5004602.010.5
12.0 (5.44)
0521-210-15000-4504002.011.5
11.7 (5.31)
0622-240-17000-5004952.010.5
14.0 (6.35)
0624-240-17000-5004952.0
10.8714.75 (6.69)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
12112 Volt 3/8" Driver / Drill Kit
Kit Includes: 3/8" T-Handle Driver / Drill with Keyless Chuck • Two 1.3 Amp-Hr Battery PacksBattery Charger • Impact Resistant Carrying Case • Std. Pkg. 1 12 Volt battery delivers more run time • Powerful 12 Volt rare earth motor develops 220 In./Lbs. maximum torque. • Reversible battery pack fits into cramped work spaces and adjusts balance. Two speed ranges 0-360 And 0-1100 RPM • Variable speed switchwith electric brake spindle stops quickly for repetitive work 19 Position torque adjustment. For precise adjustment of screw into workpiece. • T-Handle design provides optimum balance and comfort • 3/8" Keyless chuck.
No.Speed RPM HighSpeed Rpm Low
Drill Max. Torque In./Lb.Battery Capacity A-Hrs.
Length In.Pkg. Wt. Lb. (kg)
MIL
001
MIL
002
14.4 Volt 1/2" Driver / Drills
14.4 Volt, 1.7 Amp-Hr Battery • Std. Pkg. 1 • Reversible battery pack fits into tight work spaces and adjusts balance. • Powerful14.4 Volt motor develops 350 In./Lb. maximum torque with model 0511-21. 280 In./Lb. maximum torque with model 0512-21.Variable speed switch with electric brake. Spindle stops quickly for optimal efficiency in repetitive work • One-hour UniversalCharger • Two Speed Ranges: 0-450 And 0-1250 RPM • 1/2" Keyless chuck with hardened jaws for high gripping torque 19 Position torque adjustment
No.Drill Speed Rpm HighDrill Speed Rpm Low
Drill Max. torque In./Lb.Battery Amp-Hrs.
Length In.Pkg. Wt. Lb. (kg)
Heavy-Duty Lok-Tor™ Series • Std. Pkg. 1 • All-metal single sleeve Grip-Lok™ ratcheting chuck with carbide jaws for 25% moregrip-strength. • Milwaukee exclusive reversible battery pack allows for easier access into tight areas. • Ergonomic soft finger grip forenhanced comfort. • Two speed ranges 0-500 And 0-1700 RPM. • Comfortable T-handle design for optimum balance and user control. • Includes two batteries, charger, side handle and carrying case.
No.Speed RPM HighSpeed RPM Low
Max. Torque In./Lb.Battery Amp/Hrs.
Length In.Pkg. Wt. Lb. (kg)
MIL
003
18 Volt, 2.0 Amp-Hr Battery • Std. Pkg. 1One-hour universal charger compatible with all Power-Plus batteries. • Reversible battery pack fits into cramped work spaces and adjusts balance. • Two speed ranges 0-450 and 0-1500 RPM. • Variable speed switch with electric brake spindle stops quickly for optimal efficiency in repetitive work. • Ideal for high torque level applications five planetary gears for high torque performance and durability. • 20-Position torque adjustment for precise adjustment of screw into workpiece. • 1/2" Keyless chuck.
Heavy-Duty Lok-Tor™ Series • Std. Pkg. 1All-metal single sleeve Grip-Lok™ ratcheting chuck with carbide jaws for 25% more grip-strength. • Milwaukee exclusive reversiblebattery pack allows for easier access into tight areas. • Ergonomicsoft finger grip for enhanced comfort. • Two speed ranges 0-500 and 0-1700 RPM. • Comfortable T-handle design for optimum balance and user control. • Includes two batteries, charger, side handle and carrying case.
18 Volt 1/2" Driver / Drills
No.Speed RPM HighSpeed RPM Low
Max. Torque In./Lb.Battery Amp/Hrs.
Length In.Pkg. Wt. Lb. (kg)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS122
MIL
004
Sawzall® 18 Volt • Std. Pkg. 1 • Cuts up to 72 2 x 4’s on a single charge • 18 Volt, 2.4 Amp-Hr. battery. One battery included Compatible with all other Milwaukee 18 Volt products • One-hour universal charger • Powerful 18 Volt rare earth motor handles all
Sawzall applications • Keyless Quik-Lok blade clamp • Fully serviceable replaceable brushes • Accepts standard 1/2"shank Sawzall blades • Trigger speed control,lock-off switch • Reverse the blade for cuttingupside down in confined areas • Pivot shoe formaximum support against work surface.
No.Length of Stroke In.Strokes per MinuteOverall Length In.
Tool Wt. Lb. (kg)Pkg. Wt. Lb. (kg)
6515-271
0-270018.25
8.25 (3.74)17.0 (7.71)
Sawzall ® Kits
MIL
005
Sawzall-The Hatchet™ Kit
18 Volt • Includes: Tool • One 2.4 Amp-Hour Battery 48-11-2230 • Universal Charger 48-59-0245 • 2-Pack ofSawzall Blades 48-02-5055 • Impact Resistant Carrying Case48-55-3020 • Std. Pkg. 1• 6-Position rotatable handle allows user to get between joists,
studs, and other confined spaces• Orbital action selector for aggressive wood cutting• 0-2,700 SPM• 3/4" Blade stroke• Rugged, tool-free adjustable shoe• Reversible battery allows easier plunge cutting• Counter balanced mechanism reduces vibration• Durable slider-crank reciprocating mechanism withstands
abrupt stalls and abusive job-site applications. Designed for compact size and efficiency for cordless applications to maximize run-time.
• Heavy-duty Milwaukee built motor
• Double-walled rotating-handle detents provide extremely strong pivoting mechanism.
• Metal cam lock provides a firm hold in each pivoting position, particularly in high vibration
• 25 Amp Marquardt variable speed switch for greater user control and long life.
• Heavy-duty, steel, keyless Quik-lok blade clamp for fast easy blade changes. No hex key to lose or screws to strip. Accepts standard 1/2" shank Sawzall® blades.
• Soft-Grip handle pad for comfort and secure gripping• 18 Volt, 2.4 Amp-Hr battery delivers the most run time and
is compatible with all other Milwaukee 18 Volt products• Heavy-duty impact resistant carrying case• One-hour universal battery charger
6514-2118
0-27003/42.420.313.0
8.25 (3.74)17.25 (7.83)
No.Volts DC
Strokes per minuteStroke length In.
Battery Capacity Amp-HrsLength-Straight (w/battery pack) In.Length-Pivoted (w/battery pack) In.
Net Wt. Lb. (kg)Pkg. Wt. Lb. (kg)
MIL
006
14.4 Volt Impact Wrench Kits
No.Drive Size In.Torque In./Lb.
RPMImpact per Min.
Length In.Pkg. Wt. Lb. (kg)
9081-221/4 Hex
7400-22000-2500
7.5012.46 (5.65)
9082-223/8 Square
10560-22000-2500
7.6312.43 (5.64)
9083-221/2 Square
14040-22000-2500
7.6912.48 (5.66)
14.4 Volt Impact Wrench KitsStd. Pkg. 1 • Kit Includes: Tool • Two (2) 48-11-1024 14.4 Volt Battery Packs • 48-59-0245 Universal Charger • 48-55-3070 Impact Resistant Case
• Powerful motor up to 1404 In./Lbs. maximum torque (Model No. 9083-22)
• Produces up to 2500 impacts per minute• 2.4 Amp Hour Ni-cad batteries deliver maximum run time• Reversible battery pack fits into cramped work spaces and
adjusts balance
• Variable speed switch for maximum user control, 0-2200 RPM• Large, easy to operate forward and reverse shuttle• Heavy-duty die-cast, aluminum gear housing for extra
durability • Comfortable soft-grip handle pad• One-hour universal charger
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
123
Kit Includes: Tool • Two 2.4 A-h Batteries 48-11-2230Charger 48-59-0245 Impact Resistant Carrying Case 48-55-9075Std. Pkg. 1 • Produces up to 240 Ft./Lbs. maximum torque and 0-2200 impacts per minute • Easily removes and tightens lug nutson vehicle tires • 2.4 Amp hour Nicad batteries deliver maximumrun time • Reversible battery pack fits into cramped work spacesand adjusts balance • Variable speed switch for maximum usercontrol, 0-1400 RPM • Comfortable Soft-grip handle pad • Mid-Handle design for comfort and balance • 1/2" Square drive pin /detent socket retainer holds sockets and adapters more securelyOne-Hour universal charger.
18 Volt 1/2" Square Drive Impact Wrench Kit
9079-222402880
0-14000-2200
11.817.8 (8.08)
MIL
007
48-59-01861.58 (.72)
No.Pkg. Wt. Lb. (kg)
One Hour Automobile Charger • Std. Pkg. 1 • Plugs into auto’s cigarette lighter.Compatible with ALL Milwaukee Power-Plus batteries, including Ni-Cd and Ni-MH.
MIL
008
No.Size In.
Pkg. Wt. Lb. (kg)
49-66-30801/2
.12 (.05)
49-66-30909/16
.17 (.08)
49-66-31005/8
.21 (.10)
49-66-311011/16
.25 (.11)
49-66-31203/4
.24 (.11)
49-66-313013/16
.31 (.14)
Accessories
1/2" Square Drive Hex Impact Sockets • Std. Pkg. 1
3/8" Square Drive Hex Impact Sockets • Std. Pkg. 1
No.Size In.
Pkg. Wt. Lb. (kg)
No.Size mm
Pkg. Wt. Lb. (kg)
1/8" Hex adapter Std. Pkg. 1
No. 48-03-3630Pkg. Wt. 0.10 Lb. (.05 kg)
49-66-325010
.08 (.04)
49-66-325512
.09 (.04)
49-66-326013
.08 (.04)
49-66-326514
.10 (.05)
49-66-327015
.12 (.05)
49-66-32755 Pc. mm Set
.50 (.23)
49-66-32015/16
.08 (.04)
49-66-32053/8
.08 (.04)
49-66-32107/16
.08 (.04)
49-66-32151/2
.08 (.04)
49-66-32209/16
.09 (.04)
49-66-32255 Pc. In. Set
.44 (.20)
Accessories
48-11-10242.4 A-H Battery
14.4 Volt, 2.4 Amp-Hr batteryAll 14.4 Volt tools and
work light2.1 (.95)
48-11-10001.7 A-H Battery
14.4 Volt, 1.7 Amp-Hr batteryAll 14.4 Volt tools and
work light1.9 (.86)
48-59-0245One-hour universal charger
Charges batteries in one hour.All 18, 14.4, and 12Volt tools
and work lights1.4 (.64)
MIL
009
14.4 Volt Accessories
No.Accessory
DescriptionCompatible With
Pkg. Wt. Lb. (kg)
48-59-0186One-hour automobile charger
Plugs into auto’s cigarette lighterAll 18, 14.4, and 12Volt tools
and work lights1.58 (.72)
48-55-3015Impact resistant carrying caseHeavy-duty with steel latches
All 18, 14.4, and 12 Volt driver /drills and hammer-drill drivers
5.35 (2.43)
48-55-3070Impact resistant carrying caseHeavy-duty with steel latches9081-22 / 9082-22 / 9083-22
4.4 (9.7)
No.Accessory
DescriptionCompatible With
Pkg. Wt. Lb. (kg)
48-66-04201/2" Chuck
1/2" Keyless chuck for 3/8" spindleAll 1/2" chuck applications
with 1/2" spindle.32 (.15)
48-66-14001/2" Chuck
1/2" Keyless chuck with Grip-LokAll 1/2" chuck applications
with 1/2" spindle.57 (.26)
48-66-13751/2" All-metal Grip-Lok chuckKeyless chuck with Grip-LokAll 1/2" chuck applications
with 1/2" spindle.79 (.36)
No.Accessory
DescriptionCompatible With
Pkg. Wt. Lb. (kg)
No.Max. Torque Ft./Lb.Max. Torque In./Lb.
RPMImpacts per Min.
Length In.Pkg. Wt. Lb. (kg)
Std. Pkg. 1Includes Keyless Chuck and Side Handle 49-15-0260 • 5.5 AMP Motor • Removablebrush cartridge system. Change brushes in lessthan one minute, with only a screw-driver. Self-stopping brushes. Includes spare brushesstored in cartridge • Aluminum gear case anddiaphragm supplies greater support for shaft andbearings • Trigger speed control reversingswitches • All ball and roller bearings • Helicalcut, heat treated gears for heavy duty industrial /construction applications.
0234-648-66-136048-66-3280
1/2120
0-8506 (2.72)
0235-2048-66-0605
Keyless chuck1/2120
0-8506 (2.72)
0244-148-66-136048-66-3280
1/2120
0-6006 (2.72)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS124
0233-2048-66-0390
Keyless Chuck3/8120
0-28005.5
Single3/8 / 24
104 (1.81)5 (2.27)
3/8" Magnum Drills
MIL
013
No.Chuck No.
Key No.Capacity Steel In.
Volts AC OnlySpeed (No Load) RPM
Pkg. Wt. Lb. (kg)
1660-648-66-138148-66-3280
1/2120450
13 (5.90)
No.Chuck No.
Key No.Capacity Steel In.
Volts AC/DCSpeed (No Load) RPM
Pkg. Wt. Lb. (kg)
Heavy-Duty Compact Reversing • Std. Pkg. 1
1/2" Magnum DrillsHeavy-Duty • Std. Pkg. 11/2" Trigger speed control reversing • Includes: 8'3-Wire Quik-Lok Cord 48-76-4008. Heavy duty industrial Chuck, Chuck Key, rubber flex Key Holder 48-66-4040 and Side Handle 49-15-0260. 5.5 AMP Motor • Removable brush cartridge system. Changebrushes in less than one minute, with only a screw-driver. Self-stopping brushes. Includes spare brushes stored in cartridge Aluminum gear case and diaphragm supplies greater support for shaft and bearings • Heavy duty industrial chucks • Trigger speedcontrol reversing switches • All ball and roller bearings • Helical cut, heat treated gears for heavy duty industrial / constructionapplications • 8'3-Wire Quik-Lok Cord Sets. Quick detachment from tool for tangle free carrying and storage. Instant field repair.
MIL
011
MIL
012
12 Volt Accessories
48-11-19002.0 A-H 12 Volt battery
2.0 Amp-Hr battery
All 12 Volt Power-Plus tools and work light
1.7 (.77)
48-11-19501.3 A-H 12 Volt battery
1.3 Amp-Hr battery
All 12 Volt Power-Plus tools and work light
1.52 (.69)
48-11-19601.3 A-H 12 Volt battery
NEW 1.3 Amp-Hr battery
All 12 Volt Power-Plus tools and work light
1.44 (.65)
No.Accessory
Description
Compatible With
Pkg. Wt. Lb. (kg)
48-59-0245One-hour universal charger
For all Milwaukee Power-Plus batteries
All 18, 14.4, and 12Volt tools
and work lights1.4 (.64)
48-66-03603/8" Chuck
3/8" Keyless chuck
0502-20 / 0502-23/ 0502-25 / 0502-26
.02 (.01)
48-66-15303/8" All-metal Grip-Lok
3/8" All-metal keyless chuck. With Grip-Lok
0502-20 / 0502-23 / 0502-25 / 0502-26
.60 (.27)
No.Accessory
Description
Compatible With
Pkg. Wt. Lb. (kg)
Accessories (continued)
MIL
010
No.Chuck No.
Key No.Capacity Steel In.
Volts AC OnlySpeed (No Load) RPM
AMPsGear Train
Spindle Diameter In. / ThreadLength In.
Net Wt. Lb. (kg)Pkg. Wt. Lb. (kg)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
125
MIL
014
MIL
015
MIL
016
No.Description
NEMA Plug TypePkg. Wt. Lb. (kg)
Rubber Flex Key Holder
48-76-40088' Quik-Lok
5-15P1 (.45)
48-76-402525' Quik-Lok
5-15P4 (1.81)
48-66-4040For Keys 48-66-3080, 48-66-3240,
48-66-3280, & 48-66-3480.001 (.0004)
1/2" Drill Kit
3107-61/2120
0-50010.5 (4.76)
Heavy-Duty Reversing Right Angle Drill KitStd. Pkg. 1 Variable speed kitWith Speed Control.
No.Capacity Steel In.
Volts AC OnlyDrill Only RPM
Pkg. Wt. Lb. (kg)
1/2" Magnum Drills (continued)
Accessories Std. Pkg. 1
1675-648-66-138148-66-3280
1/2120
300/120015 (6.81)
Hole-Hawg® DrillNo.
Chuck No. Key No.
Capacity Steel In.Volts AC Only
Speed (No Load) RPMPkg. Wt. Lb. (kg)
Heavy-Duty Hole-Hawg® Drill • Std. Pkg. 1 • Power andtorque, reversing, compact design for drilling between studs andjoists • 2 Position pipe handle • 3 Position spade handle • 2Speed gear shift • External brush caps • Heat treated cut steelgears • All ball and roller bearings • Triple reduction gearinghandles up to 45/8" selfeed bits • Power up to 45/8" selfeed bit inlow speed and drill up to 13/8" selfeed bit in high speed.
1/2" Hammer-Drills
SDS Rotary Hammers
No.Volts AC
No Load Speed RPM Low / HighAmps
No Load Blows per Minute Low / HighLength In.
Pkg. Wt. Lb. (kg)
Std. Pkg. 1 • Includes dammer-drill, depth gauge, 48-66-5185 1/2" chuck with key and 49-15-5300removable side handle • Dual torque / speed ranges • 1/2" Keyed chuck • For percussion drilling withcarbide-tipped hammer-drill bits in concrete and masonry or drilling without hammering in wood ormetal • Trigger speed control • All ball and roller bearings • Side handle can be used on either sideand with or without depth gauge • Self-stopping brushes • Reversing • Cushion grip handle.
5378-20120
0-1,350 / 0-2,5007.5
0-22,000 / 0-40,00013
7.4 (3.36)LowHigh
11/2"3/4"
33/4"-
11/4"-
11/4"-
13/4"-
1/2"1/4"
FlatBoring
BitsHoleSaw
AugerBits
ShipAugerBits
SelfeedBits
TwistDrill
Drill Only Wood SteelHammerConcrete
3/4"3/8"
5368-21120
0-11007.2
0-50001.87/8215
12.7 (5.76)
MIL
017
MIL
018
Std. Pkg. 1 • Includes rotary hammer, plasticcarrying case, side handle and depth gauge.1" solid bit capacity in concrete – 31/2" core bitcapacity. Variable speed 0-900 RPM/0-4500BPM – Reversing. Uses SDS bits.
1" SDS Heavy-Duty Rotary Hammers
5362-61
12015 (6.81)
No.Max. Capacity In.
Volts AC OnlyPkg. Wt. Lb. (kg)
MIL
019
Std. Pkg. 1 • Includes depth gauge, side handle
and impact resistant carrying case. • D-Handle design • 7.2 Amp motor • Variable speed switch allows holes
to be started easily • 7/8" Solid bit capacity • Thin wall core bit capacity of 2".
No.Volts AC
No Load Speed RPMAmps
No Load Blows Per MinuteBlow Energy (Ft./Lb.)Solid Bit Capacity In.
Thin Wall Core Bit Capacity In.Length In.
Pkg. Wt. Lb. (kg)
Quik-Lok Cord Sets
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS126
Std. Pkg. 1 Includes depth gauge, sidehandle. 10' Quik-Lok cord 48-76-5010 and carrying caseSingle motion push-in splinebit reception • ”Soft-Shift”stop-rotation mode selector.
5321-21120
190-38511.0
1700-34007.911/225/84 / 6171/2
25.5 (11.57)
11/2" Spline Drive Heavy-Duty Rotary Hammers
MIL
020
MIL
021
Motor and Stand Combinations 120 Volt AC Only • Std. Pkg. 1 • 4206-1 Includes: 4262-1 Motor and 4203 Base4210-1 Includes: 4262-1 Motor and 4202 Base • Base control panel includes variable speed adjusting for motor • Solid state electronic switching • Feedback speed control • Computer controlled reverse • Full wave magnetic holding power • Forward /reverse control • Superior cutting tool performance • Line lock-out prevents tool from operating should voltage be restored to aninterrupted line when switch is locked in the “on” position • Motor / magnet interlock • Automatic base / chip de-mag • Automaticelectronic soft start • For use on any flat ferrous material 1/2" and thicker • For 4206-1 drill point pressure on a 1" thick steel platewith the chuck mounted closest to the base. Value is with the base adjusted to the rearward position.
No.Chuck No.
Key No.Capacity Drill In.Capacity Tap In.
Drill Point Pressure Lb. (kg)Volts AC Only
AMPsPkg. Wt. Lb. (kg)
4206-148-66-208548-66-3160
3/41-14
1670 (757.71)12012.5
70 (31.76)
4210-148-66-208548-66-3160
3/41-14
1630 (739.56)12012.5
62 (28.13)
Electromagnetic Drill Presses
Steel Hawg™ Cutters
49-57-075049-57-081249-57-087549-57-093749-57-100049-57-106249-57-112549-57-118749-57-125049-57-131249-57-137549-57-143749-57-150049-57-156249-57-162549-57-168749-57-175049-57-181249-57-187549-57-193749-57-200049-57-206049-57-212049-57-225049-57-2310
3/413/167/8
15/16
111/16
11/813/16
11/415/16
13/817/16
11/219/16
15/8111/16
13/4113/16
17/8115/16
221/16
21/821/425/16
.4 (.2)
.4 (.2)
.4 (.2).5 (.23).5 (.23).5 (.23).6 (.27).6 (.27).6 (.27).6 (.27).6 (.27).7 (.32).7 (.32).7 (.32).7 (.32).8 (.36).8 (.36).8 (.36).9 (.41).9 (.41).10 (.05).10 (.05).10 (.05).10 (.05).11 (.05)
49-57-237049-57-250049-57-256049-57-262049-47-275049-57-287049-57-300049-57-312049-57-325049-57-337049-57-350049-57-362049-57-375049-57-387049-57-400049-57-412049-57-425049-57-437049-57-450049-57-462049-57-475049-57-500049-57-550049-57-6000
23/821/229/16
25/823/427/8
331/831/433/831/235/833/437/8
441/841/443/841/245/843/4
551/2
6
.12 (.05)
.12 (.05)
.12 (.05)
.12 (.05)
.13 (.06)
.13 (.06)
.13 (.06)
.13 (.06)
.14 (.06)
.15 (.07)
.16 (.07)
.16 (.07)
.16 (.07)
.16 (.07)
.17 (.08)
.17 (.08)
.17 (.08)
.18 (.08)
.18 (.08)
.18 (.08)
.19 (.09)
.19 (.09)
.20 (.09)
.22 (.10)
3/4" ShankArbor AssemblyStd. Pkg. 1Carbide tippedmultiple cuttingedges uniformly
distribute the cutting over awider area than a two flute twistdrill tip. Recommended for usewith electromagnetic drill press.Requires an arbor assembly.
No.Pkg. Wt. Lb. (kg)
49-57-00302.05 (.93)
No.Cutter
Size In.Pkg. Wt. Lb. (kg) No.
Cutter Size In.
Pkg. Wt. Lb. (kg)
MIL
022
No.Volts AC
No Load Speed RPMAmps
No Load Blows Per MinuteImpact Energy (Ft./Lb.)Solid Bit Capacity In.
Tunnel Bit Capacity In.Thick / Thin Wall Core Bit Capacity In.
Length In.Pkg. Wt. Lb. (kg)
51921204.51/4
21,0004.5 (2.04)
51941204.51/4
21,0004.5 (2.04)
No. Volts AC/DC
AmpsCollet Dia.Load RPM
Pkg. Wt. Lb. (kg)
49-12-032041/2" Grinder
.5 (.23)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
127
No. Speed RPM
Disc Dia. In.Volts AC/DC
AmpsSpindle Size
Pkg. Wt. Lb. (kg)
Accessories • Std. Pkg 1
Std. Pkg. 1 Side Handle, Spanner Wrench,Grinding Disc, Guard, InnerFlange, Outer Flange and Nut.
No. Speed RPM
Volts AC/DCAmps
Spindle Thread SizePkg. Wt. Lb. (kg)
6065-6500012015.0
5/8"-1115.75 (7.15)
6066-6600012015.0
5/8"-1115.75 (7.15)
Std. Pkg. 1 • On/Off, AC/DC Switch.Standard Equipment: Side handle,flange, and nylon washer only. Discdiameter 7"/9".
No. Description
Pkg. Wt. Lb. (kg)
49-12-0355Fits 7" wheels
.6 (.27)
49-12-0345Fits 9" wheels
.9 (.41)
Guards For Type 27Grinding Wheel
MIL
023
MIL
024
MIL
025
Guards • Std. Pkg. 1When used as a grinder, guard must be usedfor OSHA compliance.
Sander / Grinder
41/2" & 5" Grinder
No. For Model Size
Pkg. Wt. Lb. (kg)
6140-610,000
41/21205.5
5/8"-11 6.0 (2.72)
6155-2011,000
512012
5/8"-117.3 (3.31)
MIL
028
No. Volts AC/DC AmpsWheel Size In.
No LoadRPM
SpindleThread Size
Pkg. Wt. Lb. (kg)
5243 120 15 6 5500 5/8"-11 20.75 (9.41)
MIL
026
On/Off Toggle Switch. On/Off Paddle SwitchMIL
027
Std. Pkg. 1 • Max. grinding wheel diameter reinforced organic 2 In. Max. grinding wheel diameter non-reinforced 15/8".
Die Grinders
Heavy-Duty Straight Grinder
No.Length of Stroke In.
Volts AC/DCAmps
Strokes Per Min.Pkg. Wt. Lb. (kg)
6537-2211/412010
0-320015.3 (6.94)
Std. Pkg. 1 • Includes SuperSawzall, blade assortment No. 48-02-5055, Steel Quik-Lok,blade clamp, plastic case and 8' Quik-Lok cord.
Super Sawzall
MIL
029
No.Volts AC Only
AmpsLength of Stroke In.Strokes per Minute
Pkg. Wt. Lb. (kg)
Std. Pkg. 1 • Standard Equipment: Super-Tough™ Bi-Metal Sawzall – single blade assortment No. 48-00-5091. Also included are hexkey and holder, extra blade clamp screw. Plastic carrying case.
Sawzall®
6507-211206.53/4
0-26007 (3.18)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS128
No.Blade Size In.Volts AC/DC
AmpsNo Load Speed (RPM)
Arbor In.Pkg. Wt. Lb. (kg)
6375-2071/412015
58005/8
16.5 (7.49)
6405-681/412013
58005/8
18 (8.17)
6460101/412015
52005/8
38 (17.24)
Std. Pkg. 1 • Includes 15 Amp 71/4" Circular saw and carbide blade • No. 6375-20 has Magnesium shoe.
Circular Saws
Rip Fence Kits • Std. Pkg. 1No.
For Model No.Pkg. Wt. Lb. (kg)
49-22-41466375-201.06 (.48)
49-22-41466405-6
1.06 (.48)
49-22-41466460
1.19 (.54)
Worm Drive Saws
Rip Fence Kits • Std. Pkg. 1
No.Pkg. Wt. Lb. (kg)
49-22-42101.19 (.54)
Std. Pkg. 1 • Standard Equipment: Both models – Combination blade and 9/16" wrench.
No.Blade Size In.Volts AC/DC
AmpsNo Load Speed (RPM)
Arbor In.Pkg. Wt. Lb. (kg)
6377-671/412015
4400Diamond
19.75 (8.96)
637881/412015
4400Diamond
20.25 (9.19)
Wood • Nail Embedded Wood • Steel • Cast Iron • Bar Stock • Aluminum • Brass • Conduit • Composition Materials • HardRubber Cement • Brick • Plaster • Plasterboard • Formica • Fiberglass • Leather • Felt • Drywall • Transite
MIL
030
MIL
031
No. Speed Type
VoltsAmps
Strokes per Min.Pkg. Wt. Lb. (kg)
6256-6Variable
120 AC Only3.8
0-31006.75 (3.06)
Jig SawsMIL
032
MIL
033
MIL
034
No. Volts
AmpsCapacity Round In.
Pkg. Wt. Lb. (kg)
6223120 AC/DC
6/531/2
20.5 (9.30)
6226120 AC Only
6/531/2
29 (13.15)
Std. Pkg. 1 • Two speed • All models usestandard 447/8" x 1/2" x .020 band saw blades.Standard Equipment: One No. 48-39-0510 14tooth Super-Tough™ bi-metal blade.No load surface feet per minute 250/200.
Heavy-Duty Deep Cut • Std. Pkg. 1 All models use standard 44 7/8" x 1/2" x .020 bandsaw blades. No load surface ft. per. min. 350/250.Standard Equipment: One No. 48-39-0510 quality14 tooth Super-Tough™ bi-metal blade.
62361206
43/422 (9.98)
62381206
43/431.5 (14.29)
No. Volts AC/DC
AmpsCapacity Round In.
Pkg. Wt. Lb. (kg)
Band Saws
14" Abrasive Cut-Off Machines
No. Blade Size In.Volts AC/DC
AmpsArbor Size In.
OD Pipe Dia. In.Max. Opening In.Pkg. Wt. Lb. (kg)
6175-61412015159
44.5 (20.19)
No. Size In.
Max. Safe Speed RPMPkg. Wt. Lb. (kg)
49-93-623014
5000 6.46 (2.93)
49-93-622012
4350 5.2 (2.36)
MIL
035
Milwaukee Heavy-Duty Abrasive Cut-Off Machines are designed for maximum cutting efficiency in any shop or job site location.Powerful motor, huge cutting capacity, rugged heavy-duty construction to provide stable cutting of angle iron, pipe, tubing, conduitand channels.
Premium Abrasive Cut-Off Wheels • Std. Pkg. 51" Arbor diameter. Premium quality, formulated forgeneral purpose cutting applications in metal only.Ideal for all gauges of drywall track, rebar, conduit,pipe and channels.
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
129
MIL
036
Swivel Head Shear
No. Steel CapacityVolts AC Only
AmpsPkg. Wt. Lb. (kg)
685018 Gauge (.0478")
1203.5
4 (1.81)
Replacement Accessories • Std. Pkg. 1Std. Pkg. 1
No. Description
Pkg. Wt. Lb. (kg)
48-44-0150Center blade
.04 (.02)
48-44-0160Left
blade.04 (.02)
48-44-0170Right blade
.04 (.02)
No. For Materials
Recov. Cap. Gal.TankVolts
AmpsPkg. Wt. Lb. (kg)
No. Pkg. Wt. Lb. (kg)
49-90-16705 (2.27)
Std. Pkg. 1 • Positive water shut-off. Heavy-duty filter system. Use as blower.Standard Equipment:8925 • Three paper filter bags, cloth filter,gasket and wire frame assembly, wet pick-up conversion pan, swivel connectorand canvas store-all tool bag.8965 • 7 Ft. 11/2" ID vinyl hose, hoseadapter, cloth filter assembly, foam filtersleeve, 3 wheel dolly and three paper filter bags No. 49-90-0301.
Kit consists of 1 each of the following: 10' hose, majorfloor tool, squeegee shoe, 15" crevice tool, 14" carpetinsert, utility nozzle, and double bend floor rod.
Wet & Dry Cleaning Kit • Std. Pkg. 1
Vacuum Cleaners
8925Wet or dry
15Stainless
12010
74 (33.57)
8965Wet or dry
10Steel1206.2
45 (20.41)
MIL
037
MIL
038
Portable Double-Acting Hydraulic Puncher • Std. Pkg. 1 • Do not go beyond max. punching thickness.
HS11–162445/16 (110)15/16 (24) 5/8 (16)
15/16 (24) 1/4 (6)
11.8 / 5.7 sec10,000 (700)104,380 / 52
1 (25)66 (30)
HS07–162423/4 (70)15/16 (24) 5/8 (16)
15/16 (24) 1/4 (6)
11.8 / 5.7 sec10,000 (700)104,380 / 52
1 (25)56 (25.5)
HS06–132243/8 (60)7/8 (24) 1/2 (16)7/8 (24) 1/4 (6)
11.8 / 5.7 sec10,000 (700)82,650 / 4113/16 (21)45 (20.5)
NIT
001
Hydraulic Power Unit Std. Pkg. 1
TB02141Foot switch 5.74 (2.60)
TB02142Hook clamp 2.30 (1.04)
Std. Pkg. 1
NIT
002
No.Power Source (Single Phase)
Allowable Max. Pressures PSI (kgf/cm2)
Output gt/minAt No Load
At 10,000 psiMotor
Reservoir Capacity Qt.Discharge Port
Electro-magnetic ValvePkg. Wt. w/oil Lb. (kg)
HPD–05115 V/230 V AC
10,000psi (700 kgf/cm2)
50 Hz 60 Hz1.06 1.270.48 0.58
0.4kW 4P4.23
Rc 3/84 way 3 position valve
72 (32.5)
No.Assembly Desc.
Pkg. Wt. Lb. (kg)
Selfer Hydraulic Punch Kohki
No.* Max. Throat Depth In. (mm)
Mild Steel A36 Max. Punching Dia. In. (mm) Max. Punching Thick. In. (mm)
Stainless Steel 304 Max. Punching Dia. In. (mm) Max. Punching Thick. In. (mm) Punch Time / Return Time Sec.
Allowable Max. Pressure PSI ( kgf/cm2)Max. Output Lb. / Ton
Ram Stroke In. (mm)Pkg. Wt. Lb. (kg)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS130Punches & Dies For Selfer
No. Size mmDecimalEquiv.
TJ06689TJ06687TJ06610TJ06685TJ08579TJ06683TJ06681TJ06608
–
1617
17.518
18.51920
20.5–
.6299
.6693
.6890
.7087
.7283
.7480
.7874
.8071–
No. Size mmDecimalEquiv.
TJ06679TJ07980TJ06677TJ09553TJ06675TJ06569TJ07749TJ10062
–
2121.522
22.523
23.52425–
.8268
.8464
.8661
.8858
.9055
.9251
.9449
.9843–
No. Size mmDecimalEquiv.
Std. Pkg 1
NIT
003
NIT
004
NIT
005
Jet Chisel Pneumatic Needle Scaler • Full Automatic System The only unit of its kind on the market without springs • An asset in any industry...de-slagging, de-sputtering welds, cleaning, castings, brick, stonework and other materials.
No.Air Consumption
Blows Per MinutePkg. Wt. Lb. (kg)
JEX-247.8 CFM
40006 (2.72)
JT-207.1 CFM
40005.3 (2.40)
JEX-288.8 CFM
45007.7 (3.49)
TJ06688TJ06686TJ06609TJ06684TJ08578TJ06682TJ06680TJ06607
–
1617
17.518
18.51920
20.5–
.6299
.6693
.6890
.7087
.7283
.7480
.7874
.8071–
TJ06678TJ07979TJ06676TJ09552TJ06674TJ06566TJ07748TJ10061
–
2121.522
22.523
23.52425–
.8268
.8464
.8661
.8858
.9055
.9251
.9449
.9843–
TJ10778TJ11088TJ06700TJ06698TJ06696TJ06694TJ06692TJ06611TJ06690
891011121314
14.515
.3150
.3543
.3937
.4331
.4724
.5118
.5512
.5709
.5906
TJ10779TJ11089TJ06701TJ06699TJ06697TJ06695TJ06693TJ06612TJ06691
891011121314
14.515
.3150
.3543
.3937
.4331
.4724
.5118
.5512
.5709
.5906
Universal type for 2ø,3ø needles. Popular type for 2ø,3ø needles Heavy-duty type for 2ø,3ø, and 4ø needles.
Punch • Std. Pkg 1
Die • Std. Pkg 1 • Dies are for H506-1322, H507-1624, HS11-1624 only.
Needle Scaler NeedlesNo.
Size Dia. x Lgth. mmStd. Pkg.
TA-98780-02 x 150
100
TA-98781-02 x 180
100
TA-98782-03 x 180
100
TA-98783-04 x 180
50
Beryllium copper andstainless steel needlesare also available.
NIT
006
Needle Scaler
Pneumatic Scaler
No.Description
TP04552-038 mm Bend scraper 2005
TP04554-060 mm Bendscraper 2007
TP04573-060 mm Convexscraper 2010
Optional Chisels • Std. Pkg. 1 • Use only Super-Kelenchisels. The use of conventional chisels is not recommended. Various kinds of chisels are available. Choose the one most suited for a particular job.
Super Kelen Industrial and ShipboardDescaling and Cleaning Pneumatic Scaler
Std. Pkg. 1 • Removes old paint and rust, dislodges solid matter or scale tar.Removes concrete adhering to panels, conveyors, mixers. Strips off bark fromlumber, and scores of other applications.
NIT
007
NIT
008
No.Blows Per MinuteAir Consumption
Length In. Pkg. Wt. Lb. (kg)
S-10002500
9.5 CFM577/8
13.4 (6.08)
Kohki
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
131
No.Free Speed RPM
Air Consumption CFMStandard Belt Size In.
Pkg. Wt. Lb. (kg)
B-10B17,00014.1
3/8 x 131.75 (.79)
B-20C17,000 18.4
3/4 x 207/163 (1.36)
B-30A14,000
2413/16 x 211/4
5 (2.27)
Belton Pneumatic Belt Sander Std. Pkg. 1 • Runs cool with an extrabelt length and without arm fatiguebecause, to maximize efficiency, anoperator does not have to maximizearm pressure against a material.
StandardSanding BeltStd. Pkg. 1
B-10BAA No. 60 x 2 Pc.; AA No. 80 x 1 Pc.; AA No. 100 x 1 Pc.;
AA No. 120x 1Pc.2 Pc.
B-20CAA No. 60 x 2 Pc.; AA No. 80 x 1
Pc.; AA No. 100 x 1 Pc.; AA No. 120 x 1Pc.
1 Pc.
B-30AAA No. 60 x 2 Pc.; AA No. 80 x 1 Pc.; AA No. 100 x 1 Pc.
1 Pc.
Sanding Paper • Std. Pkg. 5 Sheets No. 180 240
Free Sander Pneumatic Sander • Std. Pkg. 1 • The turbine motor of FS-100C is mounted directly onto thesanding pad to minimize the discomfort of hand vibration and lessen operator fatigue caused by vibration.
No.Pad
Size In.Sandpaper
Size In.Orbit Per Minute
RPMPkg. Wt. Lb. (kg)
FS-100C 4 x 43/8 41/2 x 51/2 20,000 1.1 (.50)
Standard Accessories
No.Description
Std. Pkg.
TA96738-0Base
plate A assembly(Base plate x 1 Pc)
1
TA96739-0Block rubber pad sub
assembly supplied w/ tool(Block rubber pad x 1 Pc)
1
240Sanding paper
5
320Sanding paper
5
Line Sander Pneumatic Reciprocating Sander • Std. Pkg. 1Produces a very fine finish on flat, narrow grooved and curved surface using the accessory pad.
No. Speed (Stroke) Air Consumption Paper Size In. Pkg. Wt. Lb. (kg)
LS-10 4000 3.9 CFM 21/4 x 51/2 1.65 (.75)
NIT
009
NIT
010
NIT
011
Pneumatic Sanders
No.Description
Hex Wrench
Optional Accessories • Std. Pkg. 1
No.Description
TA9A225-0Flat bastard file
SF-13 5 Pc. set
TA9A222-0Rat tail file
SF-10 5 Pc. set
TA9A223-0Triangular taper
file SF-11 5 Pc. set
TA9A224-0Half round file
SF-12 5 Pc. set
TA94625-0Chuck assemblyfor use w/ the
following
TA91752-0Rubber pad assembly
TA91750-0Rubber
rectangularpad assembly
Finishing File
Super Hand Portable Precision Finishing FileStd. Pkg. 1 • Super Hand is ultra-small, ultra-lightweight,yet performs with the power and efficiency of a muchlarger tool to meet user requirements of filing, chamferingand other jobs.
No.Air Consumption
Stroke In.Speed (Stroke)
Max. Dia. of Tool Point In.Pkg. Wt. Lb. (kg)
SH-100A8.5 CFM
23/643700
1/42.4 (1.09)
Standard Accessories Std. Pkg. 1 SF-13
Flat bastard file
SF-10Rat tail
file
SF-11Triangular taper
file
SF-12Hat round file
(rat tail / double cut)
No.Description
NIT
012
Kohki
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS132
PEL
001
No.Capacity In.
Pkg. Wt. Lb. (kg)
Std. Pkg. 1 • These self-contained hydraulic cutters are precision engineered tools designed to give a clean cut withminimum effort. Just pump the handle, no outside power is required. Able to be easily carried, these models arefavorites of contractors, rigging lofts and elevator repairmen, and are recommended by rope manufacturers worldwide. All three models will operate under water with special factory modifications.
C-175013⁄4
66 (29.95)
P-112511⁄8
34 (15.43)
W-0753⁄4
21 (9.53)
Light Duty Heavy Duty Extra Heavy Duty
Model No. W-075Pkg. Wt. Lb. (kg)
Model No. P-1125Pkg. Wt. Lb. (kg)
Model No. C-1750Pkg. Wt. Lb. (kg)
W621.6 (.73)
P622.1 (.95)
C622.6 (1.18)
W12.5 (1.13)
P13.2 (1.45)
C13.9 (1.77)
W4.26 (.12)
P4.52 (.24)
C4.75 (.34)
W510.6 (4.8)
P5.06 (.027)
C5.06 (.027)
W73 (1.36)
P74 (1.81)
C77 (3.18)
W8.25 (.11)
P8.43 (.20)
C8.62 (.28)
W10.125 (.06)
P10.125 (.06)
C10.125 (.06)
W331.2 (.54)
P332.3 (1.04)
C333 (1.36)
W363 (1.36)
P364 (1.81)
C363 (1.36)
W38.06 (.027)
P38.06 (.027)
C38.06 (.027)
Spare PartsStd. Pkg. 1
OverhaulKit
Die Set Blade
Blade Pin Ram
RamCollar
RamRetracting
Spring LatchPump
HandleLatchPin
Hydraulic Wire Rope Cutter
Ret Rings ®
10005S3⁄411⁄4
.89 (.40)
10032S3⁄4
17⁄16.96 (.44)
10034S3⁄415⁄8
.98 (.44)
10008S1
13⁄41.18 (.54)
10010S1
115⁄161.25 (.57)
10015S1
21⁄81.27 (.58)
10016S1
21⁄41.33 (.6)
With Steel Inserts • 30,000 PSI
10017S1
21⁄21.41 (.64)
10019S1
25⁄81.62 (.73)
10020S1
27⁄81.99 (.90)
10020S11⁄23
2.21 (1)
10025S11⁄233⁄8
2.47 (1.12)
10030S11⁄237⁄8
2.62 (1.19)
10035S11⁄243⁄8
2.7 (1.22)
Place Ret Ring ® overimpact square drive, puton impact socket aligningretention holes, then holdcenter-pin between thumband index-finger and insertit through retention holes.
Push center-pin all the way in.
Pull "O" ring up intogroove on opposite side.
No.For Use on Sq. Drive In.
Diameter In. (mm)Pkg. Wt. Lb. (kg)
No.For Use on Sq. Drive In.
Diameter In. (mm)Pkg. Wt. Lb. (kg)
RET RING®
RET
001
Socket Retainer for ImpactWrenchesStd. Pkg. 50Molded of new space agepolyurethane with tensilestrength of over 5000 PSI.Simple one piece construction.
Industrial Vacs
970-01-10Large steel tank
1050 (22.68)
970-03-10Large steel tank
2062 (28.12)
970-02-10Large stainless steel tank
1051 (23.13)
970-04-10Large stainless steel tank
2062 (28.12)
No.Description
Capacity Gal.Pkg. Wt. Lb. (kg)
970 Series 3.0 HP • Std. Pkg.1 Vacuums wet or dry. Powerful 2-stage industrial motor – 3.0 HP (peak). Special filtration system. Automatically shuts off when full –no overflow. Includes: 12' x 11/2" crushproof hose, interlocking chrome extension wands, 14" metal master nozzle, 14" rug, brushand squeegee shoes and 4-wheel heavy-duty vac chart.
SHV
001
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
133
No.Description
Capacity Gal.Pkg. Wt. Lb. (kg)
464 Series 2.5 HP (Peak) Std. Pkg. 1 Vacuums wet or dry. 2-stage industrial by-pass motor – 2.5 HP(peak). Special filtration system.Automatic shut off prevents overflow. Includes: 12' x 11/2"crushproof hose, interlockingchrome extension wands, 14" metal master nozzle, 14" rug, brush and squeegee shoes and 3-wheel heavy-duty vac chart.
464-46-10Large
steel tank10
45 (20.41)
464-48-10Large stainless
steel tank20
57 (25.86)
464-47-10Large stainless
steel tank10
46 (20.87)
464 -49-10Large
steel tank20
58 (26.31)
No.Description
Capacity Gal.Pkg. Wt. Lb. (kg)
SHV
003
SHV
002
984 Series 4 HP (Peaks)
984-01-10Large steel tank
1571 (32.21)
984-02-10Large stainless
steel tank15
72 (32.66)
984-03-10Large steel tank
5585 (38.56)
984-04-10Extra-duty
head assembly55
34 (15.42)
15 Gallon Extra Heavy-Duty Wet/Dry Vac• Vacuums wet or dry...indoors or out.• Powerful 2-stage industrial motor – 4
HP (peak).• Special filtration system. • Automatically shuts off when full –
no overflow.• Completely safe to operate – UL listed.• Standard equipment includes:
12' x 11/2" crushproof hose, interlocking chrome extension wands, brush and squeegee shoes, 4-wheel heavy-duty vac cart and hose cage.
• Large capacity 15 Gal. steel tank. (984-01)
• Large capacity 15 Gal. stainless steeltank. (984-02)
Industrial Vacs (continued)
TIG
001
Tigair Air Powered Reciprocating Saw Std. Pkg. 1
The world's finest air powered reciprocating saw. Non-sparking, operates in or around hazardous areas,even under oil or water. Rugged, compact and easy to use, the Tigairsaves time and money around plantsand shops. It fits into tight spots, cutsanything a hacksaw cuts: up, down, instraight lines or tight curves at 0 to1200 strokes per min. and leaves a
burrless edge. It oils itself, even the blade, and cannot be damaged bystalling. Since it is air-powered, it will cut underwater, even in oil, slurries and in hazardous areas where other tools invite risk. Uses standard hacksaw blades. Complies with OSHA standards.
Reciprocating Saw
No.Kit Includes:
Air Pressure Speed
Length In.Pkg. Wt. Lb. (kg)
IM-100Metal carrying case,
one 8 Oz. can of master Speed red oil and
10 high speed bi-metal hacksaw blades
90-110 PSI0-1200 Strokes per minute
166 (2.72)
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
PPOOWWEERR TTOOOOLLSS134
TRN
002
9595582/11/2
15/15,75024230
18741
15 HP 1/2" line959429808811/2"
90660 & 0513365 (29.48)
95962160 /2
15/15,75023950
37482
25 HP 3/4" line9594298088
2" 90633
79 (35.83)
No.Vacuum CFM/Size In.Amps/RPM per Head
Static Waterlift In.Horizontal Reach Ft.
External Filter Area Sq. In.Venturi Powerheads
Rec. Compressor55Gal. Roll-Top Drum
Drum DollyHose Adapter In.
Wet/Dry Tool SetsPkg. Wt. Lb. (kg)
Air External JumbosStd. Pkg. 1For Wet/Dry Recovery.Powered by your own compressed air. Drum-topassembly includes one or twoVenturi powerheads, jumbocover, large external poly filters and rods debris deflector,and 2" hose adapter. Order aroll-top drum, drum dolly, andattachments. 1/4" Jet installed,7/32" and 1/4" jets supplied.
Jumbo Vacs95954184/2
15/15,7505130
18741
959429808811/2"
90660 & 0513390633
84 (38.10)
95960184/3
15/15,7505150
37482
9594298088
2" 90660 & 05133
90633113 (51.26)
No.Vacuum CFM/Size In.Amps/RPM per Head
Static Waterlift In.Horizontal Reach Ft.
External Filter Area Sq. In.Venturi Powerheads
55 Gal. Roll-Top DrumDrum Dolly
Hose Adapter In.11/2" Wet/Dry Tool Sets
2" Wet/Dry Tool SetsPkg. Wt. Lb. (kg)
Electric External JumbosStd. Pkg. 1 • For Wet/DryRecovery. Heavier wastes settlein drums. Light particles collectin large external filters. Drum-top assembly includesone or two electric power-heads, jumbo cover, filters androds debris deflector, and hoseadapter. Order a drum, dolly,and attachments separately.115 V, 60 Hz. 50' cables. 1.5HP 230 V models.
TRN
001
Industrial Air Toolis a distributor formost major brands of industrial supplies.If you can’t find whatyou are looking for in our catalog, give us a call. One of ourexperienced salesstaff will be happy to assist you.
9899512 Gal./1.3 Bshl.
T-Lite/1618451
12682.25 Powerhead
15/15,750115 V, 60 Hz
9066090668/26
38 x 20 x 2450
65 (29.48)
9899014 Gal./1.5 Bshl.
Stainless/1818451
1268Pneumatic15/15,750
–90660
90668/2641 x 20 x 24
5071 (32.21)
9419016 Gal./1.72 Bshl .
T-Lite/218480544
1.1 Bypass8/17,400
115 V, 60 Hz, 230 V*90654
90679/28371/2 x 18 x 25
5048 (21.77)
PPOOWWEERR TTOOOOLLSS
©2005 INDUSTRIAL AIR TOOL / PASADENA, TEXAS, USA / 24 HOUR HOTLINE: (713) 477-3144
135
98451258200501003748
450 HP 1" line
9594298088
104 (47.17)
No.CFM (2" Orifice)
Static Waterlift In.Vertical Lift Ft.
Horizontal Reach Ft.External Filter Area Sq. In.
Venturi PowerheadsRec. Compressor
55 Gal. Roll-Top DrumDrum Dolly
Pkg. Wt. Lb. (kg)
Quad-Air External Jumbo • Std. Pkg. 1For Wet/Dry Recovery. Four powered Venturipowerheads generate 258 CFM of vacstrength. Drum-top assembly includes adrum cover, four liquid shut-offs, two largeexternal filters, a debris deflector, and a 2"hose adapter. Order a roll-top drum, a drumdolly, and 2" attachments separately. 1/4" Jetinstalled, 3/16" and 7/32" jets available.
TRN
003
Commercial / Industrial Vacs
Head Master 4000 Vac • Std. Pkg. 1A large 21 Gal. T-Lite tank offers aneasy-drain 11/2" hose and an easy-roll transport. It’s usable with aplastic liner, and accepts an optional28" Trot-Mop Squeegee. The 1.1 HPlift-off Power Module has a wet filter, dry filter, motor filter, 50'cable, and cable wrap built in.
Taskforce Stainless External Vac Std. Pkg. 1 • The filter is outside thetank, so you can do wet and dryvacuuming simultaneously. Heavierliquids and dirt collect in the tank,while light particles are captured inthe external poly filter. Venturi powerhead generates an amazing242" of waterlift. Tornado air vacuums are spark-free and have nomoving parts to wear.Optional Trot-Mop® Squeegee, 11/2" wet/drytool sets, liquid shut-off, and blowing nozzle.
T-Lite™ External Vac • Std. Pkg. 1 The 16 Gal. T-Lite thermoplastictank is crack-proof, corrosion-proof, and carries a 5-year warranty. With the detachable21/4 HP (184 CFM) powerheadand large poly external filter youcan vacuum wet, dry, light, andheavy filth simultaneously. Rideseasily on a Tip & Pour Carrier.Ride-along Tool Caddy. Broad selection of options for a variety of applications.
No.Wet/Dry Capacity
Tank Type/Gal.CFM (2" Orifice)
Static Waterlift In.Filter Area Sq. In.
Motor HPAmps/RPM
Power11/2" Wet/Dry Tool Set
Trot-Mop® Squeegee/Size In.Size (H x W x D) In.
Safety Cable Ft.Pkg. Wt. Lb. (kg)
No.Wet/Dry Capacity
Tank Type/Gal.CFM (2" Orifice)
Static Waterlift In.Filter Area Sq. In.
Motor HPAmps/RPM
Power11/2" Wet/Dry Tool Set
Trot-Mop® Squeegee/Size In.Size (H x W x D) In.
Safety Cable Ft.Pkg. Wt. Lb. (kg)
No.Wet/Dry Capacity
Tank Type/Gal.CFM (2" Orifice)
Static Waterlift In.Filter Area Sq. In.
Motor HPAmps/RPM
Power11/2" Wet/Dry Tool Set
Trot-Mop® Squeegee/Size In.Size (H x W x D) In.
Safety Cable Ft.Pkg. Wt. Lb. (kg)
TRN
004
WP
001
Electric Rope Cutters • Cuts and fuses all synthetic ropes.100 Volts AC Positive off/on switch. Replaceable blade.
No.Std. Pkg.
Pkg. Wt. Lb. (kg)
154631
3 (1.36)
Electric Rope Cutter
Jumbo Vacs (continued)