Tariff Concession Order 1773340 - Home Affairs

FOI Document #1

s22(1)(a)(ii)

s47F

s47F

s47F

s47F s47F

FOI Document #2

FOI Document #2

s47F

s47F

s47F

s47F

s47F

s47F

s47F

s47F

s47F

s47F

Trade Consultants (NSW) Pty Limited 65 050 737 258

1 Hurford Place, Orange NSW 2800

26/78

SPC Ardmona Australia Operations Limited 64 004 077 105

Level 1, 678 Victoria Street, Richmond Vic 3121

FOI Document #2

See Attachment: A

7309.00.00

5

For the intermediate sterile (aseptic) storage of a mixture of fruit pieces and sugar syrup for later use in an aseptic filler

FOI Document #2

FOI Document #2

Kompass (see Attachment: B(1))

Tanks, Vacuum, Food Industry

Alibaba (see Attachment: B(2))


Australian Suppliers Directory (see Attachment: B(3))


Importer is not aware of any Australian manufacturers. Please refer to Attachments B(1), B(2) and B(3) for search results

FOI Document #2

FOI Document #2

s47F s47F

s47F

Trade Consultants (NSW) Pty Limited

7 July 2017

FOI Document #2

FOI Document #3

s47G

s47G

FOI Document #3

s47G

(https://www.kompass.com/)

About Kompass (http://www.kompass-international.com/DigitalFactory/en/sites/kompass/home.html)

Search our directorySuppliers or companyinformation∠

(https://www.kompass.com/b/business-directory/)

Business solutions

Sales leads? Online promotion?

∠

BlogNews, surveys, resources∠

(http://www.kompass.com/e/en/)

Location ∠ Activities ∠ Number Of Employees ∠

Buy this prospect list (/search/easyListResultList?searchText=Tanks, Vacuum, Food Industry)

1271 Search results for : Tanks, Vacuum, Food Industry

Manufacture of machinery for food drink

(/c/boyd/gb25081548/)

Buckie - United Kingdom

(/c/boyd/gb25081548/)

Cookers, vacuum, food industry...Cookers, vacuum,food industry;...Pans, vacuum, ...

Brewery equipment manufrs (/c/meura-

brewery-equipment-ltd/gb94045126/)

Buntingford - United Kingdom (/c/meura-

brewery-equipment-ltd/gb94045126/)

Tanks, stainless steel, food industry;...Vacuumpressure transfer systems, food industry;......

using our website, you agree to our cookie policy.

Find out more Do not

display

FOI Document #4

Laixi City, Shandong - China (/c/qingdao-

tianfu-food-equipment-co-ltd/cn116066/)

Cooking machinery and equipment for the foodindustry...Cooking machinery and equipment for thefood ...

Industrial Machinery (/c/mechanical-food-

process-engineering-co-ltd/th0018209/)

Chachoengsao - Thailand (/c/mechanical-

food-process-engineering-co-ltd/th0018209/)

Driers, vacuum, food industry...Driers, vacuum, foodindustry;...Vacuum pressure ...

Siennica Nadolna - Poland (/c/brenal-sp-z-o-

o/pl153513/)


Livestock feeding systems (/c/e-b-

equipment/gb82194326/)

Barnsley - United Kingdom (/c/e-b-

equipment/gb82194326/)

Vacuum pressure transfer systems, foodindustry;...Vacuum pressure transfer systems, food ...

stanbul - Turkey (/c/mutlu-makina-san-tic-

ltd-sti/tr044405/)


Production of technology equipment for grape

processing: Storage tanks for wine, syrups and

other products, circulation vacuum ... (/c/aeh-

spol-s-r-o/sk001727/)

Pezinok - Slovakia (/c/aeh-spol-s-r-

o/sk001727/)

Tanks, stainless steel, food industry;...Storage tanksfor wine, syrups and other products, circulation ...

Brønderslev - Denmark (/c/intech-

international-a-s/dk110722/)


Global suppliers of high quality used process

plants & equipment (/c/3-d-i-equipment-

ltd/gb05518790/)

Crewe - United Kingdom (/c/3-d-i-

equipment-ltd/gb05518790/)

Food industry plant and equipment NES;...Foodindustry plant and equipment NES...Installation, repairand ...

FOI Document #4

Sligo - Ireland (/c/sf-engineering/ie19153a/)


Viborg - Denmark (/c/samson-pumps-a-

s/dk029459/)

Food industry plant and equipment NES;...Pumps,food industry;...Machinery and equipment for the ...

Włocławek - Poland (/c/busch-polska-sp-z-o-

o/pl077658/)

Food industry plant and equipment NES;...Foodindustry plant and equipment NES...Machinery andequipment ...

Actual realisation of projection arrangement;

constructional processing; technological

procedure of production; installation; ...

(/c/technos-a-s/sk005910/)

Hronec - Slovakia (/c/technos-a-s/sk005910/)


Erpe-Mere - Belgium (/c/apv-benelux-

nv/be0000912/)

Pans, vacuum, food industry...Pans, vacuum, foodindustry;...Driers, vacuum, ...

ERCOLANO - Italy (/c/campania-forniture-

srl/it0254992/)

Forming and vacuum packaging machines, foodindustry...Forming and vacuum packaging machines,food ...

Manufacture of machinery for food drink

(/c/food-mac-international-ltd/gb34018349/)

Todmorden - United Kingdom (/c/food-mac-

international-ltd/gb34018349/)

Tanks, stainless steel, food industry;...Forming andvacuum packaging machines, food ...

SURGERES - France (/c/soc-commerciale-

industrielle-ouest/fr8001514/)

Tanks, stainless steel, food industry;...Vacuum pansor tanks for dairies;...Tanks and vats,...

FOI Document #4

1 (/searchCompanies/scroll?pageNbre=1) 2 (/searchCompanies/scroll?pageNbre=2) 3

(/searchCompanies/scroll?pageNbre=3) 5 (/searchCompanies/scroll?pageNbre=5) 10

(/searchCompanies/scroll?pageNbre=10) 15 (/searchCompanies/scroll?pageNbre=15) 20

(/searchCompanies/scroll?pageNbre=20) ... 64 (/searchCompanies/scroll?pageNbre=64)

(/searchCompanies/scroll?pageNbre=10)

Tit Mellil - Morocco (/c/luxinox/ma3260795/)

Cookers, vacuum, food industry...Cookers, vacuum,food industry;...Pans, vacuum, ...

2 Products

Phone number

Email Free

BRASOV - Romania (/c/nova-pan-

srl/ro007351/)

Cookers, vacuum, food industry...Cookers, vacuum,food industry;...Vacuum pressure ...

Frequent updates ensuring high

quality data (/k/company-info-

updates)

Help with expert advice (/k/data-

management)

Dedicated customer service team

(/contactus/)

Business Solutions

FOI Document #4

ooonnnnnnnnssssssss

Business tools and solutions designed for the global marketplace

EasyBusiness

(https://www.kompass.com/m/easybusiness/

EasyList

(https://www.kompass.com/m/purchase-

prospects-list/)

Booster

(https://www.kompass.com/m/booster/)

Promotional solutions

(https://www.kompass.com/m/online-

promotion/)

See all business solutions

(https://www.kompass.com/h/business-

solutions/)

Videos & Tutorials

(https://www.kompass.com/m/kompass-

tutorials/)

Kompass worldwide

Our presence in more than 60

countries (/selectcountry/)

About

About Kompass

(http://www.kompass-

international.com/DigitalFactory/en/sites/ko

Kompass classification

(/showNomenclature/)

Business articles

(https://www.kompass.com/m/kompass-

seo-job)

More about Kompass?

(https://www.kompass.com/k/data-

management)

Terms of use

(https://www.kompass.com/en/l/terms-

of-use)

Cookies policy

(https://www.kompass.com/l/cookie-

use-policy)

Legal info

(https://www.kompass.com/l/legal-

info)

Need advice?

Contact us (/contactus/)

FOI Document #4

mm/en/l/tetetetetetetetermrmrmrmrmrmrmrms

mm/l/l/llllll/c/c/c/c/c/c/c/coooo kikikikikikikikieeeee-eee

mm/l/l/lllll/l/l/l/l/l/l/l/leeeeeege allllllll-----

FOI Document #4

jacketed mixing vessel, food industrialmixing tanks, vacuum mixer

3 Transactions(6 months)

40,000+

Response Rate

93.8%

Shanghai Youcan Beverage Machinery…

China (Mainland) Trade Assurance

Transaction Level:

Sponsored Listing Leave Messages

SIPUXIN SZR-HB 100Lcream/lotion/liquid/paste/ointment

Response Rate

20.0%

Guangzhou Sipuxin Light Industry Ma…

China (Mainland)

Similar Products Leave Messages

Fuyang buda jacketed mixing vessel,food industrial mixing tanks, vacuum

1 Transaction(6 months)

700+

Response Rate

30.1%

Hangzhou Buda Water Treatment Co., …


Transaction Level:

Similar Products Chat Now!

Vacuum Power Cryogenic LiquidNitrogen/Oxygen/Argon Storage Tank for


6,000+

Response Rate

88.3%

Xinxiang Jinxin Import And Export Ma…


Transaction Level:


Related Category

Machinery

Snack Machines

Other Food Processing

Machinery

Fruit & Vegetable Processing

Machines

Environment

Water Treatment

Product Features

Certification

Packaging

Sample Order

Supplier Features

Supplier by Area

Suppliers byCountry/Region

Supplier Types

Total Revenue

See more

Mgnt Certification

Products Suppliers

Supplier Location: Past Export Countries:All Countries & Regions All Countries & Regions

Supplier Types: Trade Assurance Gold Supplier Assessed Supplier

View 1,887 Product(s) below Sort By : Best MatchOnlineMin Order: Less Than

After-sales Service Provi…

Additional Capabilities: h…

Mixer Type: Agitator

Application: Liquid,chemi…

Warranty: Lifelong Mainte…

Certification: ISO ISO900…

US $2850.0 / Set

1 Set (Min. Order)

5 Photos

$

Add to Compare Contact Supplier

Max. Loading Capacity: 2…

Warranty: One year

Place of Origin: Guangdo…

Certification: CE/ISO9001

Brand Name: SPX (SIPUX…

Product Type: Cosmetic

US $16130-19350 /

Set

1 Set (Min. Order)

6 Photos


Dimension(L*W*H): Cust…

Condition: New


Power(W): N/A

Warranty: One Year

Model Number: BD-MT02

1 Piece (Min. Order)

3 Photos

$



Material: SS304 Q235-B/…

Model Number: CFL-10/1.6

Brand Name: JX

Place of Origin: Henan,Ch…

Application: Food industry

US $27109-27854 /

Piece


6 Photos

$


CE

Bulk

Can (Tinned)

NEW

Free samples

Paid samples

Min Order: Less Than

OK

Asia

China (Mainland)

Trade Assurance

Gold Supplier

Onsite Checked

Assessed Supplier

Transactions viaAlibaba.com

US$1 Million - US$2.5Million

US$5 Million - US$10Million

Above US$100 Million

US$50 Million - US$100Million

ISO9001

Other

HACCP

BRC

Products Tanks, Vacuum, Food SearchMy Alibaba

Sign In Join Free Order

Protection Favorites

0

Related Searches: food machinery machines dog food sea food

Categories

One Request, Multiple Quotes Get the AppSourcing Solutions Services & Membership Help & Community

FOI Document #4

nnnse seseese esese RatRRRRRRR eeeeeeee

.1%1%1%%%%%

AssAA urance

Chahhaaat Nt N t Nt ow!!!!!!!!

onoo sesesesesesesese RatRatRatRatRatRatR teeeeeeee

8.88 3%3%3%3%%3%3%3%

nd nd ExpExpExpEExpExpExpExportrttttttt MaMaMMMMMM …

AssAssAsssssssurururururarurr ncencencecece

Chahh t Nt Nt Nt Nt Nt Nt Nt Now!w!w!!!!w!w!

vacuum homogenizing mixer ,heatertank,industrial food mixer

Response Rate

87.1%

Wuxi Designer Machinery Co., Ltd.


Transaction Level:


Vacuum stainless steel mixing tankssteel mixing tank for food industries


150,000+

Response Rate

92.2%

Shanghai Gorun Machinery Technolog…


Transaction Level:


Jacketed mixing vessel, food industrialmixing tanks, vacuum mixing tank


150,000+

Response Rate

92.2%

Shanghai Gorun Machinery Technolog…


Transaction Level:


Industry use food sanitary juice vacuumdegassing tank


40,000+

Response Rate

20.8%

Shanghai Nancheng Machinery Co., Ltd.


Transaction Level:

Similar Products I'm Away

vacuumed food industrial 5m3 liquidstorage tank


30,000+

Response Rate

92.3%

Xinxiang Chengde Global Trading Co., …


Transaction Level:


Vacuum industrial tank mixer/food gradestainless steel tank

Zhengzhou Furui Mechanical Equipme…


Transaction Level:

See more

My HistoryType: Reaction Kettle

Certification: CE,ISO9001

Dimension(L*W*H): Depe…

Power(W): 2.5kw

Weight: Customized by c…

Brand Name: DZAE

US $10000-20000 /

Set

1 Set (Min. Order)

5 Photos


Dimension(L*W*H): Cust…


Power(W): 0.75KW~45KW

Warranty: 1 Year

Product Type: for food,ch…

Model Number: GRMT va…

US $300-10000 /

Piece


6 Photos

$$


Warranty: One Year for va…

Certification: ISO, TUV, A…

Condition: New

Place of Origin: Shanghai…

Brand Name: Gorun for v…

Usage: mixing Tank

US $2000-8000 / Set

1 Set (Min. Order)

6 Photos

$$


Model Number: TQ-1

Brand Name: NC

Place of Origin: CN;SHG,…

Processing: Other

Weight: 3500kg

Power(W): 4.5kw

US $1500-5000 / Set

1 Set (Min. Order)

4 Photos

$$


Condition: New


Dimension(L*W*H): 2000…


Weight: 3412kg

Capacity: 5m3

US $12940-13140 /

Set

1 Set (Min. Order)

6 Photos

$$


Max. Loading Capacity: 5…US $1200-5000 / Set

FOI Document #4

0.00 8%

mmm AwAwAwAwAwAwAwAway

onononnsesesesessess RatRatRatRatRatatRatRateeeeeeee

2.22 3%%3%3%%3%3%3%

TraTraTraaaaaadidindidididididi g Cg Cg Cg Cg Cg CCg Cooo.,ooooo …

AssAssAssssssuururauur ncececececececece

mmm AwAAAwAwAAway

niciciccccalalalalalalala EquEEEEEEE ipmpmipmipmipmipmipmipmeee

AssAssAsssssssurauurururururur ncencecncecencecence


30,000+

Response Rate

76.3%


Vacuum power adiabatic Liquid CO2 tankfor Food Industry


30,000+

Response Rate

92.3%



Transaction Level:


food industrial vacuum powder liquidcarbon dioxide storage tank


30,000+

Response Rate

92.3%



Transaction Level:


YHRHJ Mixing Tank for Sale IndustrialEmulsifier Tank Vacuum Homogenizing

Response Rate

15.4%

Guangzhou Aerospace Automation & T…

China (Mainland)

Transaction Level:


food vacuum industrial extraction tank


30,000+

Response Rate

83.7%

Shanghai Beyond Machinery Co., Ltd.

China (Mainland)

Transaction Level:


stainless steel high pressure movablestorage tank, beverage,food,

Response Rate

100.0%

Guangzhou Desheng Light Industry M…

China (Mainland)

Transaction Level:

Mixer Type: Agitator

Power(W): 1.5 ~ 95KW

Warranty: 12 months,one …


Brand Name: Furui

1 Set (Min. Order)

$$


Capacity: 5000-200000L

Weight: Specification

Certification: ISO9001 CE…

Warranty: 1 Year

Condition: New

Color: White or Customer'…

US $15000-17500 /

Set

1 Set (Min. Order)

6 Photos

$


Model Number: CFL-10/2.…


Dimension(L*W*H): 2100…


Type: Vertical Pressure T…

Capacity: 10000L

US $12400-15000 /

Set

1 Set (Min. Order)

6 Photos

$


Dimension(L*W*H): Vary

Condition: New

Application: Liquid

Product Type: Food&cos…

Type: Hydraulic Lift

Model Number: YHS-500

US $10000-100000 /

Set

1 Set (Min. Order)

5 Photos


Certification: ISO9001/H…

Power(W): variable

Voltage: 380V 50hz


Place of Origin: Shanghai…

Processing Types: Juice

US $3000-50000 /

Set

1 Set (Min. Order)

4 Photos

$


Warranty: a year

Condition: New

Capacity: 500L

Place of Origin: Guangdo…

Model Number: ST-500

US $1300-2500 / Set

1 Set (Min. Order)

5 Photos

FOI Document #4

Leaee ve Mesesesesesesesessagsasagsasagsasasa e

onoo sesesesesesesese RatRatRatRatRatatRatateeeeeeee

3.33 7%%%7%7%7%

nerererrrrry Cy Cy Cy Cy Cy Cy Cy Co., LtLLLLLL d.

Chahh t Nt Ntttttt ow!!!!!!!!

ht tt Indndndndndndndndustustustustustustustustry ry ry ry ry ryry ry MMMMMMM…


industrial blender machine Cosmeticvacuum emulsifier mixer stainless steel

Response Rate

91.7%

Guangzhou Yeto Machinery Co., Ltd.


Chat Now!

650L ketchup mixing tank,vacuumketchup homogenizer, industrial food


220,000+

Response Rate

3.3%

Wuxi YK Automation Technology Co., L…


Transaction Level:


industrial food mixer, vacuumemulsifier/homogenizer, chocolate


220,000+

Response Rate

3.3%

Wuxi YK Automation Technology Co., L…


Transaction Level:


food vacuum industrial extraction tank


70,000+

Response Rate

43.3%

Zhejiang Tanlet Machinery Co., Ltd.


Transaction Level:


Show : 20 38 50 Go to Page Go1 2 3 4 5 6 7 ... 50

Related Searches: food flask food beverage food container chemical food preservatives food cart

Haven't found the right supplier yet ? Let matching verified suppliers find you.

Brand Name: DS5 Photos


Type: Vacuum Emulsifyin…

Name: Cosmetic vacuum…

Mixer Type: bidirectional …

Brand Name: YETO

Voltage: 380v 50Hz /220…

After-sales Service: Engin…

US $5000-100000 /

Set

1 Set (Min. Order)



Mixer Type: Emulsifying

Application: Viscous Fluid

Warranty: 1 year

Brand Name: YK

Product Type: Cosmetic

US $1-10000 / Set

1 Set (Min. Order)

2 Photos

$


Condition: New


Mixer Type: Homogenizer

Application: Viscous Fluid

Warranty: 1 year

Place of Origin: Jiangsu,C…

US $1000-100000 /

Set

1 Set (Min. Order)

2 Photos

$


Condition: New

Model Number: TQ

Voltage: depends

Weight: depends

Dimension(L*W*H): depe…

Material: Stainless Steel

US $10000-15000 /

Set

1 Unit (Min. Order)

6 Photos

$


RequestforQuotation

Request for Quotation

Get Quotation NowFREE

FOI Document #4

onoo sesesesesesesese RatRatRRatRRateee

3.33 3%3%3%3%3%3%3%3%

ry Cy Cyy Co.,oo LtLtLtd.dd

AssAA urancencencencecencencence

Leaeaeaaaavev Messsssssssasasagsagsagsasasa e

GGGGoGoGGG

r QuQuQuQuQuQuQuQuotoootoo atatatatatatatatioioioioioiioion

Do you want to show Tanks, Vacuum, Food Industry or other products of your own company? Display your Products FREE now!

Download: Download TradeManager: Follow Us:

Alibaba.com Site: International - Español - Português - Deutsch - Français - Italiano - िहंदी - Pусский - 한국어 - - اللغة العربية - ภาษาไทย - Türk -

Nederlands - tiếng Việt - Indonesian - עברית

Alibaba Group | Taobao Marketplace | Tmall.com | Juhuasuan | AliExpress | Alibaba.com | 1688.com | Alimama | Fliggy Alibaba Cloud | YunOS | AliTelecom | Autonavi | UCWeb | Umeng | Xiami | DingTalk | Alipay | Lazada

Browse Alphabetically: Global Expo | Onetouch | Showroom | Country Search | Suppliers | Wholesaler | Affiliate

Product Listing Policy - Intellectual Property Protection - Privacy Policy - Terms of Use - Law Enforcement Compliance Guide

© 1999-2017 Alibaba.com. All rights reserved.

Trade Alert - Delivering the latest product trends and industry news straight to your inbox.

Your email

We’ll never share your email address with a third-party.

Subscribe

TOP

X

FOI Document #4

Search for thousands of Australian companies, their products and services. You can browse by selecting an industrycategory, search on a company name, or simply enter a related keyword into the search window below.

If you cannot find what you are looking for on Australian Suppliers Directory, please search these alternativeindustry directories or contact [email protected] for assistance.

SEARCH RESULTSYou searched for keywords 'Tanks, Vacuum, Food Industry'

No records found, refine your search.

SEARCHGENERAL DETAILS

KeywordsTanks, Vacuum, Food Industry

Keyword Search Type

Australian SuppliersDirectory

FOI Document #4

And Or

Company Name

State

✓

INDUSTRIES

Industries

(hold down CTRL to select or unselect multiple items)

2017 Australian Trade and Investment Commission

Select

AgribusinessArts & RecreationBuilding & ConstructionBusiness & Other ServicesConsumer Goods, Non-FoodDefence, Security & SafetyEducation & TrainingEnvironment & EnergyFinance & InsuranceFood & BeverageGovernmentHealth, Biotechnology & WellbeingICTManufacturing (Other)Mining

FOI Document #4

mmmmimimimimimimimisssss ioioioioioioioionnnnnnnn

FOI Document #5

s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

s47F

s47F s47F

s47F

s47F

s47F s47F

FOI Document #6

s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii)

TCO Number ADF2017/73340

Title Diced Fruit Vacuum Aseptic Tanks

Centre NTAC

OP Date 07/07/2017

28 Day Due Date 04/08/2017

Date Sent 07/07/2017

Date Due 14/07/2017

Applicant SPC Ardmona Australia Operations Ltd

Broker/Agent Trade Consultants (NSW) Pty Ltd/

Goods Diced Fruit Vacuum Aseptic Tanks

Claimed Classification 7309.00.00

Tariff Screening Officer

IDM Rejection

Open TA

Are the Goods Classifiable Comments

Does Applicant’s Wording Contradict Proposed Tariff Class

Tariff Classification

Is TCO Restricted by Reg. 145 (EGS)

Comments

General Duty Rate

Identification of Goods

Tariff Advice No(s)

Headings Considered

Comments and Chapter Notes

Query Date

Tariff Officer

Finalisation Date

FOI Document #6

s47F

Version Updates

Application

TA Advice

FOI Document #6

FOI Document #7

FOI Document #7

s22(1)(a)(ii)

FOI Document #8

s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii)

FOI Document #8

s22(1)(a)(ii)

s22(1)(a)(ii)

TCO Number ADF2017/73340

Title Diced Fruit Vacuum Aseptic Tanks

Centre NTAC

OP Date 07/07/2017

28 Day Due Date 04/08/2017

Date Sent 07/07/2017

Date Due 14/07/2017

Applicant SPC Ardmona Australia Operations Ltd

Broker/Agent Trade Consultants (NSW) Pty Ltd/

Goods Diced Fruit Vacuum Aseptic Tanks

Claimed Classification 7309.00.00

Tariff Screening Officer

IDM Rejection

Open TA

Are the Goods Classifiable Comments

Yes

Does Applicant’s Wording Contradict Proposed Tariff Class

No, however there is no need for ‘diced fruit’ to be in the wording.

Omit (i) from wording as it could imply the goods have mechanical

features which would subsequently change the classification of the

goods.

Tariff Classification 7309.00.00

Is TCO Restricted by Reg. 145 (EGS) No

Comments

General Duty Rate 5%

Identification of Goods Aseptic vacuum tank made from steel for storage of dices and syrups

of fruit.

Tariff Advice No(s)

Headings Considered 7309

Comments and Chapter Notes IR1 and IR6. HSEN 7309 provides guidance

Query Date

FOI Document #8

s47F

s47G

Tariff Officer

Finalisation Date 12/07/2017

Version Updates

Application

TA Advice

FOI Document #8

s22(1)(a)(ii)

FOI Document #9

s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

s47F

s47F

s47F s47F

s47F

Supervisor Tariff Concessions | Australian Border Force | Department of Immigration and Border ProtectionTel. No. 02 Fax No. 02 6223 8180 | Email

FOI Document #9

s22(1)(a)(ii) s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

Quote: TC 1773340Your Ref: 26/78

Department of Immigration & Border ProtectionPO Box 25Belconnen ACT 2616Ph: (02) Fax: (02) 6223 8180Email: [email protected]

2 August 2017

TRADE CONSULTANTS (N.S.W.) PTY. LIMITED1 HURFORD PLACEORANGE NSW 2800

Dear

TARIFF CONCESSION SYSTEMAPPLICATION ACCEPTANCE

Your application for Tariff Concession Order (TCO) Number TC 1773340 has been accepted by the Department of Immigration and Border Protection as a valid application. The application will be published in Gazette Number TC17/34 of 9 August 2017. Details of the gazette notice are shown in the attachment.

Please examine the wording of the gazette notice and advise the Comptroller-General of Customs immediately if the wording does not accurately describe the goods for which a TCO has been sought. This is a verification of agreed wording not an opportunity to further amend.

Yours sincerely,

Delegate of the Comptroller-General of Customs

FOI Document #10

s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

s47F

Description of Goods including the Schedule 4 Item NumberCustoms Tariff Classification

7309.00.00 TANKS, ASEPTIC, VACUUM, including ALL of the following:(a) maximum internal pressure NOT less than 5 bars;(b) volume capacity NOT less than 2 000 L;(c) operating nitrogen pressure NOT less than 0.2 bars and NOT

greater than 0.4 bars;(d) elliptically shaped upper tank head AND conically shaped

lower tank bottom;;(e) air AND nitrogen connection ports;(f) aseptic pneumatic valves;(g) feeder pipe sight glass;(h) inspection manhole

Op. 07.07.17 - TC 1773340

Stated Use:For the aseptic storage of materials such as fruit pieces and sugar syrup

Applicant:SPC ARDMONA OPERATIONS LIMITED

50

FOI Document #10

5 Constitution Ave Canberra ACT 2601Telephone: 02 6275 6061 www.border.gov.au

4 August 2017

ManagerNewell Composites Pty Ltd191 Adelaide RdMurray Bridge SA 5253

Dear Sir/Madam,

TARIFF CONCESSION SYSTEM

NOTIFICATION OF APPLICATION

An application has been made for a Tariff Concession Order (TCO) as described in the attachment.

The Tariff Concession System allows for a concessional rate of Customs duty where it can be established that on the day on which the application was lodged, no substitutable goods were produced in Australia in the ordinary course of business.

To allow for comments by local manufacturers, all applications for Tariff Concession Orders are published in the Commonwealth Gazette. In this instance, the Department of Immigration and Border Protection (DIBP) is bringing to your attention Gazette No. TC 17/34 on 9 August2017, in which a description of the goods in the attachment will be published.

In accordance with section 269M of the Customs Act 1901 you are invited to lodge a submission objecting to the making of this TCO if you consider that you have any reasons to oppose the making of the TCO.

Objections to Tariff Concession Orders by local manufacturers must be submitted on an approved form. As required by legislation, your submission must be lodged with DIBP in accordance with the methods of lodgement specified on the approved form no later than 26September 2017.

If you have any enquiries please contact me on telephone number 02 .

Yours sincerely


FOI Document #11

s22(1)(a)(ii)

s22(1)(a)(ii)

5 Constitution Ave Canberra ACT 2601Telephone: 02 6275 6061 www.border.gov.au

4 August 2017

ManagerKNM Pty Ltd (W.E. Smith Engineering Pty Ltd)Hamilton DriveBoambee NSW 2450

Dear Sir/Madam,

TARIFF CONCESSION SYSTEM

NOTIFICATION OF APPLICATION

An application has been made for a Tariff Concession Order (TCO) as described in the attachment.

The Tariff Concession System allows for a concessional rate of Customs duty where it can be established that on the day on which the application was lodged, no substitutable goods were produced in Australia in the ordinary course of business.

To allow for comments by local manufacturers, all applications for Tariff Concession Orders are published in the Commonwealth Gazette. In this instance, the Department of Immigration and Border Protection (DIBP) is bringing to your attention Gazette No. TC 17/34 on 9 August2017, in which a description of the goods in the attachment will be published.

In accordance with section 269M of the Customs Act 1901 you are invited to lodge a submission objecting to the making of this TCO if you consider that you have any reasons to oppose the making of the TCO.

Objections to Tariff Concession Orders by local manufacturers must be submitted on an approved form. As required by legislation, your submission must be lodged with DIBP in accordance with the methods of lodgement specified on the approved form no later than 26September 2017.

If you have any enquiries please contact me on telephone number 02 .

Yours sincerely


FOI Document #12

s22(1)(a)(ii)

s22(1)(a)(ii)

FOI Document #13

s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

s47F

s47F

FOI Document #13

s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

s47F

s47F

FOI Document #13

Commonwealth of Australia Gazette

No. TC 17/34, Wednesday, 9 August 2017 Published by the Commonwealth of Australia

TARIFF CONCESSIONS

CONTENTS TCO Applications ....................................................................................................... 2 TCO Application Reworded....................................................................................... 7 TCOs Made.................................................................................................................. 8 Comptroller-General of Customs Initiated - Intention to Revoke........................ 11 Local Manufacturer Initiated - TCO Revoked and Re-Issued .............................. 12 Intention to Revoke TCOs not used in over 2 years ............................................. 13 TCOs Revoked - Unused for over 2 years ............................................................. 16 Comptroller-General of Customs Initiated - TCOs Revoked ............................... 21 About Border Watch ................................................................................................ 25

The Commonwealth of Australia Tariff Concessions Gazette (the Tariff Concessions Gazette) is free of charge on the DIBP

internet site at: http://www.border.gov.au/Busi/domestic-manufacturers-and-importers

The Tariff Concessions Administration Section is located at 5 Constitution Ave Canberra City 2601

Contact details:General Email Inquiries:……………………………[email protected] Inquiries: ...............................................................(02) 6229 3567TAPIN help desk: ................................................................(02) 6275 6534Facsimile: ............................................................................(02) 6223 8180

Cat. No. ISSN 0813-8389©Commonwealth of Australia, 2017

FOI Document #13

2 TCO Applications Commonwealth of Australia Gazette No TC 17/34, Wednesday, 09 Aug 2017

TCO Applications

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS

Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.

Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days of the date of publication of this Notice.

The operative date (Op.) and TC reference number follow the description of goods.

To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.

Objections to the making of TCO submission forms are available at

http://www.border.gov.au/Forms/Documents/b444.pdf

Contact: Email [email protected]

THE TABLE

Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Duty Rate

4202.92.90 BAGS, SECURITY, having ALL of the following: (a) eyelets; (b) webbing strap; (c) nylon bag Op. 07.07.17 - TC 1773127 Stated Use: Locks out odd size and large electrical connecters Applicant: MAYO HARDWARE PTY LTD

50 5%

7309.00.00 TANKS, ASEPTIC, VACUUM, including ALL of the following: (a) maximum internal pressure NOT less than 5 bars; (b) volume capacity NOT less than 2 000 L; (c) operating nitrogen pressure NOT less than 0.2 bars and NOT greater than 0.4 bars; (d) elliptically shaped upper tank head AND conically shaped lower tank bottom; (e) air AND nitrogen connection ports; (f) aseptic pneumatic valves; (g) feeder pipe sight glass; (h) inspection manhole Op. 07.07.17 - TC 1773340 Stated Use: For the aseptic storage of materials such as fruit pieces and sugar syrup Applicant: SPC ARDMONA OPERATIONS LTD

50 5%

FOI Document #13

5%5%5%5



7326.90.90 PIPE MOUNTING COMPONENTS, being ANY of the following: (a) slide sets; (b) blocksets; (c) mounting kits consisting of ALL of the following: (i) threaded stud; (ii) hexagon nut; (iii)rod coupling; (iv) universal joints, (d) universal joints; (e) toggle stud Op. 10.07.17 - TC 1774217 Stated Use: Pipe mounting and/or fixing Applicant: COP-A-MATE PRODUCTS PTY LTD

50 5%

8301.40.00 LOCKS, having BOTH of the following: (a) deadbolt tubular latch; (b) cylinders Op. 04.07.17 - TC 1771694 Stated Use: Building doors Applicant: GAINSBOROUGH HARDWARE INDUSTRIES LTD

50 5%

8301.60.00 PARTS, LOCK, being cylinders with OR without keys Op. 04.07.17 - TC 1771695 Stated Use: For building doors Applicant: GAINSBOROUGH HARDWARE INDUSTRIES LTD

50 5%

FOI Document #13



8301.60.00 PARTS, LOCKS, being deadbolts having ALL of the following: (a) tubular latch; (b) strike plate; (c) fixing screws; (d) escutcheons Op. 07.07.17 - TC 1773130 Stated Use: Parts for deadbolts used on building doors Applicant: GAINSBOROUGH HARDWARE INDUSTRIES LTD

50 5%

8302.41.00 DOOR FURNITURE, LEVER AND/OR KNOB, having BOTH of the following: (a) tubular latch; (b) striker Op. 04.07.17 - TC 1771692 Stated Use: Providing passage or privacy function on internal doors and entrance on exterior doors Applicant: GAINSBOROUGH HARDWARE INDUSTRIES LTD

50 5%

8419.50.90 HEAT EXCHANGERS, INTERNAL COMBUSTION GAS ENGINE, having BOTH of the following: (a) weight NOT less than 35 kg and NOT greater than 694 kg; (b) cooling ribs and/or fins Op. 12.07.17 - TC 1775223 Stated Use: For cooling internal combustion gas engines Applicant: CLARKE ENERGY (AUSTRALIA) PTY LTD

50 5%

8422.30.90 BOX AND/OR CONTAINER WEIGHING AND FILLING MACHINES, programmable logic controlled, having ALL of the following: (a) weighers; (b) fillers; (c) conveyors Op. 06.07.17 - TC 1773022 Stated Use: For filling and weighing boxes and containers with goods, such as cherries Applicant: PROUD SOLUTIONS PTY LTD

50 5%

8428.90.00 MASTS, TELESCOPIC, including ANY of the following: (a) hand operated winch height adjuster; (b) motor driven height adjuster; (c) pneumatic driven height adjuster Op. 07.07.17 - TC 1773878 Stated Use: For communications testing, surveillance and lighting purposes. The masts can be used on vehicles, trailers, shelters or for field deployment Applicant: CBO TELECOMMUNICATIONS PTY LTD

50 5%

8441.80.10 REWINDERS, including ALL of the following: (a) speed NOT greater than 2 000 m/min; (b) finished reel NOT greater than 2 600 mm; (c) trim width NOT greater than 7 000 mm; (d) carrying drums diameter NOT greater than 900 mm Op. 04.07.17 - TC 1771207 Stated Use: To wind toilet and similar tissues onto a cardboard core as a final part of the manufacturing process Applicant: ENCORE TISSUE (AUST) PTY LTD

50 5%

FOI Document #13

5%5%5%5%5%5

50505505050

5%5%5%5%5%5%

505050505050

5%5%5%5%5%5%



8479.89.90 DIVER CONTROL AND SUPPORT SYSTEM, having ALL of the following: (a) electrical AND/OR gas umbilicals; (b) hydraulic power units; (c) safety equipment, being ALL of the following: (i) breathing cylinders AND masks; (ii) gas tester; (iii) life jackets; (iv) resuscitator; (v) dive harness; (vi) fire extinguishers; (vii) dive cylinder; (viii) stretcher; (ix) oxygen analyser, (d) compressors; (e) filters; (f) air receiver tanks; (g) workshop tools, being ALL of the following: (i) sockets; (ii) drill; (iii) screw drivers; (iv) wire brush; (v) tape measures; (vi) wrenches; (vii) hammers; (viii) pliers; (ix) spanners; (x) saws; (xi) hot air gun, (h) diver communications, being ALL of the following: (i) phones; (ii) radios; (iii) headphones; (iv) video cameras; (v) monitors; (vi) video receivers; (vii) speakers; (viii) microphones, (i) gas control panels; (j) decompression chamber; (k) clump weight; (l) dive baskets; (m) hydraulic launch AND recovery frames, including BOTH of the following: (i) winches; (ii) guides Op. 07.07.17 - TC 1773881 Stated Use: To maintain life support for divers by monitoring and controlling the dive gas and communications from the surface to reduce the risks associated with deep sea diving Applicant: DOF SUBSEA AUSTRALIA PTY LTD

50 5%

8536.50.99 SWITCH SYSTEM, having at least one of the following: (a) switch mechanism, having BOTH of the following: (i) operating voltage NOT greater than 240; (ii) maximum load NOT greater than 6 A, (b) remote mechanism; (c) dimmer mechanism, having BOTH of the following: (i) operating voltage NOT greater than 240 VAC: (ii) maximum load NOT greater than 350 W Op. 20.07.17 - TC 1778495 Stated Use: Adjustment and control of lighting Applicant: SCHNEIDER ELECTRIC (AUSTRALIA) PTY LTD

50 5%

FOI Document #13

5%5%5%5%55%

55555500000

5%5%5%5%5%5%



8544.30.00 ASSEMBLIES, CABLE, consisting of ALL of the following: (a) cross-linked polymer AND/OR polyethylene foam sheath insulation; (b) sheath AND electrical connectors; (c) cables Op. 06.07.17 - TC 1773026 Stated Use: To protect power and signal cables or wiring from high temperatures or fluid contact corrosion Applicant: HUBER & SUHNER (AUSTRALIA) PTY LTD

50 5%

FOI Document #13

7 TCO Application Reworded Commonwealth of Australia Gazette No TC 17/34, Wednesday, 09 Aug 2017

TCO Application R ewor ded

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269L(4B)(b) - PROPOSAL TO AMEND DESCRIPTION OF GOODS FOLLOWING AN OBJECTION SUBMISSION

Amended description has been proposed for the Tariff Concession Order application shown in the following TABLE.

Australian manufacturers who consider that there are reasons why the Tariff Concession Order as proposed to be amended should not be made are invited to lodge a submission. Submissions must be lodged no later than 14 days after the publication of this Notice.

The operative date (Op.) and TC reference number follow the description of goods.

To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.


THE TABLE

Description of Goods including the Schedule 4 Item Number Customs Tariff Classification

8428.90.00 PALLETISING SYSTEM, programmable logic controlled, including ALL of the following: (a) layer palletising machines, including BOTH of the following: (i) hoist with a retractable layer plate; (ii) layer pusher AND aligner, (b) conveyors AND/OR conveyor belts; (c) pallet de-stackers; (d) cardboard layer sheet inserter; (e) access platform, including BOTH of the following: (i) stairs; (ii) metal grid floors AND/OR walls, (f) parcel stoppers; (g) isolator circuit breakers; (h) control panel; (i) barcode readers; (j) parcel gripping AND hoisting machine; (k) parcel turners AND aligners Op. 19.04.17 - TC 1741631 Stated Use: For de-stacking pallets, forming pallet layers, depositing layers onto pallets, multi parcel stacking, turning and aligning parcels. Also for inserting cardboard layers between pallets and for transporting pallets Applicant: DEMATIC PTY LTD

50

FOI Document #13

8 TCOs Made Commonwealth of Australia Gazette No TC17/34, Wednesday, 09 Aug 2017

TCOs M ade

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE

Tariff Concession Orders have been made for the goods described in the following TABLE.

The operative date (Op.) and TC reference No. follow the description of goods. Local manufacturers of substitutable goods may request the revocation of TCOs at any time.


THE TABLE


7210.49.00 SHEETS, flat rolled, non-alloy steel, hot dipped galvanized zinc coated, having ALL of the following: (a) yield strength NOT less than 450 MPa; (b) tensile strength NOT less than 480 MPa; (c) total elongation NOT less than 10%; (d) total coating mass on ALL sides NOT less than 275 g/m2; (e) thickness 4.0 mm AND width 1 200 mm AND length 2 160 mm For the purposes of this Order, tolerances allowable for specification (e) are as follows: (i) thickness +/- 0.2 mm; (ii) width +/- 5 mm; (iii) length +/- 10 mm Op. 16.05.17 Dec. date 04.08.17 - TC 1750287

50

8309.90.00 CLOSURES, CAN END, resealable, including ALL of the following: (a) outer ring; (b) aluminium foil membrane; (c) plug; (d) diameter NOT less than 103 mm Op. 21.03.17 Dec. date 02.08.17 - TC 1730996

50

8421.99.90 PARTS, FILTER PRESS, being plates AND/OR frames Op. 04.05.17 Dec. date 03.08.17 - TC 1745904

50

8422.30.90 BOTTLE RINSING AND FILLING AND SEALING AND LABELLING MACHINES, including ALL of the following: (a) mono block rinsers; (b) fillers; (c) cappers AND/OR corkers; (d) labellers Op. 04.05.17 Dec. date 03.08.17 - TC 1746327

50

8422.30.90 MEDICAL PLASTIC SATCHEL FILLING, SEALING AND LABELLING MACHINES, incorporating a printer, with OR without pill, ampoule, bottle OR medical kit feeders Op. 09.05.17 Dec. date 02.08.17 - TC 1747551

50

8428.90.00 PALLETISE AND DEPALLETISE HANDLING SYSTEM, SORT AND PICK, GAS CYLINDER, programmable logic controlled, including ALL of the following: (a) 6-axis robot cell; (b) gas cylinder transfer gantry robot including ALL of the following: (i) bridge unit; (ii) vertical module; (iii) gantry structure, (c) robot grippers; (d) robot controls; (e) pallet AND/OR palletised gas cylinder turntables; (f) gas cylinder pallets; (g) fences AND doors AND safety barriers; (h) electrical cabling AND cabinets Op. 04.05.17 Dec. date 03.08.17 - TC 1746323

50

FOI Document #13

50505050505

505050505050

9 TCOs Made Commonwealth of Australia Gazette No TC17/34, Wednesday, 09 Aug 2017

Description of Goods including the Schedule 4 Item Number Customs Tariff Classification Last Date of Effect General Duty Rate

8428.90.00 STORAGE AND RETRIEVAL MACHINES, REEL AND/OR TRAY, having BOTH of the following: (a) barcode scanners; (b) record keeping software Op. 04.05.17 Dec. date 03.08.17 - TC 1746332

50

8428.90.00 ROTARY TABLES AND CONVEYOR BELTS, programmable logic controlled, incorporating conveyed goods holding rails Op. 10.05.17 Dec. date 02.08.17 - TC 1747838

50

8477.59.00 EXPANDABLE POLYSTYRENE SHAPE MOULDING PLANT, including ALL of the following: (a) shape moulders; (b) moulds; (c) pre-expander; (d) fluid bed; (e) loading screw; (f) granulator; (g) deduster; (h) hoppers; (i) electrical controls; (j) condensers; (k) valves; (l) filler guns; (m) tanks; (n) cooling fan; (o) conveyors; (p) pipes; (q) hoists; (r) unloaders; (s) safety fences AND gates Op. 03.05.17 Dec. date 03.08.17 - TC 1745727

50

8479.89.90 NAPPY CORE MACHINES, having ALL of the following: (a) filtration unit; (b) powder meters AND conveyors; (c) core forming drum Op. 11.05.17 Dec. date 02.08.17 - TC 1748671

50

8479.89.90 CORE WRAPPING AND CUTTING MACHINES, NAPPY, having ALL of the following: (a) core wrap unwinding AND splicing module; (b) acquisition layer unwinding AND splicing module; (c) combined acquisition layer applicator AND core cutting module, including gluing module Op. 11.05.17 Dec. date 02.08.17 - TC 1748674

50

8479.89.90 NAPPY EAR FABRICATION AND APPLICATION MACHINE, having ALL of the following: (a) integrated nappy back ear unwinding AND splicing AND shaping module; (b) integrated nappy front ear unwinding and splicing module; (c) integrated front ear transport AND application AND cutting module, including gluing module; (d) nappy back ear bonding unit; (e) front ear shaping AND cutting unit; (f) back ear shaping AND cutting unit; (g) back ear transport AND application AND cutting unit, including gluing module Op. 11.05.17 Dec. date 02.08.17 - TC 1748678

50

8479.89.90 FOLDING AND CUTTING MACHINES, NAPPY Op. 11.05.17 Dec. date 02.08.17 - TC 1748686

50

FOI Document #13

50505005050

505050505050

10 TCOs Made Commonwealth of Australia Gazette No TC 17/34, Wednesday, 09 Aug 2017

Description of Goods including the Schedule 4 Item Number Customs Tariff Classification Last Date of Effect General Duty Rate

8479.89.90 TOP AND BACK SHEET MACHINES, NAPPY, having ALL of the following: (a) back sheet unwinding AND splicing unit; (b) elastic unwinders; (c) top sheet unwinding AND splicing unit; (d) frontal tape unwinders AND splicing unit; (e) frontal tape application AND cutting unit, including gluing module Op. 11.05.17 Dec. date 02.08.17 - TC 1748690

50

8479.89.90 PULL AND PRESS MACHINES, NAPPY Op. 11.05.17 Dec. date 02.08.17 - TC 1748694

50

8536.50.99 SWITCHES, MICROPROCESSOR ADDRESSABLE, with OR without wiring, having BOTH of the following: (a) electric current rating NOT less than 60 mA and NOT greater than 275 mA; (b) voltage rating NOT less than 50 V and NOT greater than 600 V Op. 09.05.17 Dec. date 02.08.17 - TC 1747425

50

FOI Document #13

11 Comptroller-General of Customs Initiated - Intention to Revoke Commonwealth of Australia Gazette No TC 17/34, Wednesday, 09 Aug 2017

Comptroller-Gener al of C ustoms Initi ated - Intention to R evoke

INTENTION TO REVOKE TARIFF CONCESSION ORDER

It is intended to revoke the Tariff Concession Order for the goods described in the following TABLE. The Comptroller-General of Customs’ delegate has declared the intention, subject to s.269SD(1AB), to make an order revoking the TCO in the table below with effect from 3 August 2017. On 3 August 2017, the Comptroller-General of Customs’ delegate formed the belief in respect of the TCO, that if the TCO was not in force on that day, and an application for the TCO was made on that day, the Comptroller-General of Customs would not have made the TCO. The Comptroller-General of Customs would not have made this TCO because he believes that the wording does not give a full description of the goods the subject of the TCO. Interested parties are invited to provide, by close of business 6 September 2017, written reasons why the TCO should not be revoked. Contact: Email [email protected]

THE TABLE


9505.10.00 ANIMATED FIGURES, CHRISTMAS FESTIVITY, representing human forms, animals and non-human creatures, battery or mains powered, having a maximum height of 100 cm Op. 14.07.97 Dec. date 29.09.97 - TC 9706128

50

FOI Document #13

12 Local Manufacturer Initiated - TCO Revoked and Re-Issued Commonwealth of Australia Gazette No TC 17/34, Wednesday, 09 Aug 2017

Local M anufac tur er Initiated - TC O R evoked and Re-Issued

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269SE(1)&(2) - TARIFF CONCESSION ORDERS REVOKED AND NARROWER TARIFF CONCESSION ORDERS MADE

Tariff Concession Orders for the goods described in the following TABLE have been revoked and narrower Tariff Concession Orders have been made in respect of the goods described below.

The operative date (Op.), decision date (Dec. date) and TC reference number follow the description of goods. In-transit provisions apply.


THE TABLE

Description of Goods including the Schedule 4 Item Number Customs Tariff Classification Last Date of Effect

TCO REVOKED 3904.10.00 POLYVINYL CHLORIDE, having ALL of the following:

(a) mean granular size NOT less than 100 microns and NOT greater than 200 microns; (b) granular size minimum 95% by volume NOT less than 50 microns and NOT greater than 300 microns; (c) K-value complying with ISO 1628-2: 1998 of NOT less than 55 and NOT greater than 80 Op. 07.10.16 Dec. date 13.02.17 - TC 1657757 Substitutable goods manufactured in Australia in the ordinary course of business by LyondellBasell Pty Ltd, South Yarra, Vic. In transit provisions apply

50 11.07.17

TCO REISSUED 3904.10.00 POLYVINYL CHLORIDE, having ALL of the following:

(a) mean granular size NOT less than 100 microns and NOT greater than 200 microns; (b) granular size minimum 95% by volume NOT less than 50 microns and NOT greater than 300 microns; (c) K-value complying with ISO 1628-2: 1998 of NOT less than 59 and NOT greater than 80 Op. 12.07.17 Dec. date 02.08.17 - TC 1780688

50

FOI Document #13

13 Intention to Revoke TCOs not used in over 2 years Commonwealth of Australia Gazette No TC 17/34, Wednesday, 09 Aug 2017

Description of Goods including the Schedule 4 Item Number Customs Tariff Classification Last Date of Effect Intention to Revoke TC Os not used i n over 2 years

TARIFF CONCESSION ORDERS (TCOs) NOT USED IN THE PREVIOUS 2 YEARS

The Comptroller-General of Customs is satisfied that the TCOs listed in the table below are no longer required because, in the 2 years preceding the day of this notice, they have not been quoted in an import declaration to secure a concessional rate of duty. From Thursday, 7 September 2017, it is intended to take action to revoke these Orders under subsection 269SD (1A) of the Customs Act 1901. In accordance with subsection 269SG (2) of the Customs Act 1901, in transit provisions shall apply. If revoked, the expected date of effect will be 6 September 2017. Interested parties are invited to provide, by close of business, Wednesday 6 September 2017, written reasons why an Order should NOT be revoked. Please advise if any of the Orders listed below have been quoted on an import declaration. If a request is made to retain an Order used for the granting of a Determination, please specify the Determination and the linked Item number to enable mapping to the Order and its scope.

THE TABLE ______________________________________________________________________________________________________________ Tariff Classification Description Concession Number ______________________________________________________________________________________________________________ 3816.00.00 PUMPING-UP MATERIAL, STAVE TO BLAST FURNACE BRICK, having a

basis of coal tar and anthracene Op. 20.12.07 Dec. date 14.03.08 - TC 0721917

3911.90.00 RESINS, POLYETHERSULPHONE, having ALL of the following: (a) tensile modulus 10 200 MPa; (b) density 1 600 kg/m3; (c) melt volume flow rate (MVR) 30 cm3/10 minutes; (d) 30% glass fibre reinforcement tolerances of + 5% and - 5% are allowable for specifications (a) through to (d) Op. 29.08.07 Dec. date 09.11.07 - TC 0711604

4412.31.00 DOOR SKINS, PLYWOOD, having ALL of the following: (a) thickness NOT greater than 3.6 mm; (b) width NOT less than 838 mm and NOT greater than 1 220 mm; (c) length NOT less than 2 058 mm and NOT greater than 3 050 mm Op. 20.09.07 Dec. date 30.11.07 - TC 0715782

4802.54.90 PAPER, PRINTING, white, uncoated, woodfree, 100% unbleached pulp, having a weight NOT less than 29 gsm and NOT greater than 35 gsm Op. 24.10.08 Dec. date 16.01.09 - TC 0836867

5509.42.00 YARN, 2 ply, para-aramid staple fibres, comprising NOT less than 30% polybenzimidazole staples fibres Op. 20.12.07 Dec. date 14.03.08 - TC 0721923

5907.00.00 FABRICS, WINDOW FURNISHING, having ALL of the following: (a) 100% polyester base; (b) plain, dobby or hopsack weave; (c) aluminium coating on one side; (d) weight NOT exceeding 150 gsm Op. 05.10.07 Dec. date 14.12.07 - TC 0716883

FOI Document #13


6001.21.00 FABRICS, TERRY TOWELLING, knitted, having BOTH of the following: (a) weight NOT less than 400 gsm; (b) width NOT less than 1 450 mm Op. 16.08.07 Dec. date 02.11.07 - TC 0713093

7408.11.00 COPPER EXTRUSION, in coil form, extruded, annealed, solid rectangular cross-section whether or not including rounded edges or corners, having BOTH of the following: (a) thickness NOT less than 2 mm; (b) width NOT less than 15.5 mm Op. 16.08.07 Dec. date 02.11.07 - TC 0713009

7419.99.00 OUTLETS, TANK, brass, self tapping Op. 21.08.07 Dec. date 31.01.08 - TC 0712976

8414.90.90 PARTS, SINTER COOLER, being ANY of the following: (a) pans; (b) support rollers; (c) spokes; (d) inner and/or outer side walls; (e) ball joints; (f) rotating inner seals; (g) carry channels; (h) pan wheels; (i) rail support beams; (j) fixed inner and outer seals; (k) discharge rails; (l) side guide rollers Op. 07.12.07 Dec. date 29.02.08 - TC 0720931

8416.30.00 GRATES, RECIPROCATING, hydraulic Op. 20.09.07 Dec. date 30.11.07 - TC 0715850

8416.90.00 KITS, REPAIR, GAS BURNER, consisting of ALL of the following: (a) burner tiles and/or burner blocks; (b) gaskets; (c) seals; (d) nuts; (e) bolts; (f) rings; (g) gas mixers Op. 09.08.07 Dec. date 19.10.07 - TC 0712570

8417.90.00 COOLERS, SINTER, RAIL, having ALL of the following: (a) capacity NOT less than 1 370 000 Nm3/hour; (b) emptying ratio NOT less than 95%; (c) sinter temperature at exit NOT greater than 120 degrees centigrade; (d) heat rejection NOT less than 160 MW; (e) natural gas flow NOT less than 290 Nm3/hour at 4 m/minute strand speed for flame intensity of 10 MJ/m2 Op. 10.12.07 Dec. date 29.02.08 - TC 0720743

8424.89.90 SPRAYING SYSTEMS, TOBACCO FLAVOURING, programmable logic control, comprising ALL of the following: (a) spray applicators; (b) heated application tanks; (c) support platforms Op. 28.06.07 Dec. date 18.12.07 - TC 0710143

FOI Document #13


8438.10.90 LABORATORIES, TESTING BAKING, BISCUIT, comprising ALL of the following: (a) output capacity NOT greater than 10 kilos per hour; (b) rotary moulders; (c) four roller sheeters; (d) rotary cutters; (e) continuous band ovens having a belt width NOT greater than 120 mm Op. 17.08.07 Dec. date 29.10.07 - TC 0713094

8474.90.00 PARTS, CONCRETE MOULDING PLANT, FLAT ELEMENTS, being ANY of the following: (a) integrated pallet circulators; (b) oscillating compactors; (c) panel storers and transferors; (d) panel support moulds; (e) concrete spreaders; (f) concrete spreader bridges; (g) integrated panel moulding shutters and handlers; (h) flat panel demoulders; (i) shutter cleaners Op. 24.07.07 Dec. date 09.10.07 - TC 0711893

8479.89.90 CLEANING MACHINES, FOOD FORMING DRUM, MEAT AND/OR VEGETABLE FORMERS Op. 04.09.07 Dec. date 09.11.07 - TC 0714097

8479.89.90 COATERS, GLASS, CHEMICAL VAPOUR DEPOSITION, comprising ALL of the following: (a) tin compound feeders; (b) gas precursor feeders; (c) pollution controllers and processors; (d) hydrofluoric acid feeders; (e) beam coaters; (f) oil heaters and coolers Op. 10.10.07 Dec. date 29.01.08 - TC 0717248

8483.40.90 DRIVES, AERATOR, helical, output NOT less than 30 kW, comprising ANY of the following: (a) axle thrust bearings; (b) motor lanterns; (c) output couplings Op. 17.12.07 Dec. date 07.03.08 - TC 0721698

FOI Document #13

16 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette No TC17/34, Wednesday, 09 Aug 2017

TCOs R evoked - U nused for over 2 years

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269SE(2) - TARIFF CONCESSION ORDER REVOCATION AT THE INITIATIVE OF COMPTROLLER-GENERAL OF CUSTOMS

The Tariff Concession Orders listed in THE TABLE below have has not been used for at least 2 years and have been revoked under Section 269SD(1A). In transit provisions apply.

The intention to revoke these orders was notified in Gazette TC17/28 dated 28 June 2017.


THE TABLE


5210.21.00 FABRIC, having ALL the following: (a) 45% polyester; (b) 55% cotton; (c) 97 gsm; (d) thread count 70x62; (e) thread size 30/30 For the purposes of this order, tolerances of + or - 5% are allowable for specifications (a) through to (b). Op. 09.10.06 Dec. date 22.12.06 - TC 0615520 2 Years non use. In transit provisions apply

50 24.07.17

5402.45.00 YARN, nylon 6.6, polyamide continuous filament, untextured, yarn count NOT exceeding 167 decitex BUT excluding all synthetic and artificial monofilament yarn Op. 01.01.07 Dec. date 07.11.06 - TC 0614166 2 Years non use. In transit provisions apply

50 24.07.17

5402.47.00 YARN, 100% polyester, semi-dull, 20 denier Op. 01.01.07 Dec. date 08.11.06 - TC 0614171 2 Years non use. In transit provisions apply

50 24.07.17

6307.90.99 SHEETS, nylon, mesh, incorporating tea bag strings Op. 30.10.06 Dec. date 30.01.07 - TC 0614915 2 Years non use. In transit provisions apply

50 24.07.17

6902.90.00 BRICKS AND/OR SHAPES, REFRACTORY, TUYERE ZONE OR BOSH, fired, having ALL of the following: (a) silicon carbide (SiC) content NOT less than 80%; (b) bulk density NOT less than 2.4 grams/cubic metre; (c) apparent porosity NOT greater than 19%; (d) cold crushing strength NOT less than 78 MPa Op. 04.10.06 Dec. date 22.12.06 - TC 0615399 2 Years non use. In transit provisions apply

50 24.07.17

7013.28.00 SETS, BAR GLASSWARE, comprising BOTH of the following: (a) cocktail shakers; (b) drinking glasses Op. 01.01.07 Dec. date 14.11.06 - TC 0614182 2 Years non use. In transit provisions apply

50 24.07.17

8417.90.00 PARTS, ROTARY PYROLYSIS KILN, being tubes Op. 10.10.13 Dec. date 23.12.13 - TC 1333895 2 Years non use. In transit provisions apply

50 24.07.17

FOI Document #13

502444.07.....171717171717

5050505050502444.0.0.0.0.0.07.77.7.7.171717171717

5050505050502444.0.0.0.0.0.07.777 171717171717

5050550552444.0.0.00.0.07.7.77.7.7.17111711


8419.90.00 PARTS, REGENERATIVE THERMAL OXIDIZER, being ANY of the following: (a) burner platforms with gas trains; (b) combustion air fans; (c) seal air ducts; (d) damper fixers; (e) seal air connectors; (f) pressure relief value safety lines; (g) hot water recirculation valve lines; (h) purge air ducts Op. 01.01.07 Dec. date 13.11.06 - TC 0614231 2 Years non use. In transit provisions apply

50 24.07.17

8419.90.00 PARTS, REGENERATIVE THERMAL OXIDIZER, being ANY of the following; (a) expansion joints; (b) sound absorbers with filters; (c) platforms; (d) stairs; (e) supports; (f) mounts Op. 01.01.07 Dec. date 13.11.06 - TC 0614232 2 Years non use. In transit provisions apply

50 24.07.17

8419.90.00 PARTS, PICKLE LINE TANK, being ANY of the following: (a) tank segments; (b) covers; (c) lids Op. 01.01.07 Dec. date 13.11.06 - TC 0614234 2 Years non use. In transit provisions apply

50 24.07.17

8419.90.00 PARTS, PICKLE LINE TANK, STEEL STRIP, being ANY of the following: (a) rinse and reverse rinse squeegee rolls; (b) steering rolls; (c) reverse rinse deflector rolls; (d) squeegee roll cylinders; (e) squeegee roll strip lifter bars; (f) seals; (g) rinse and steering window cleaners Op. 01.01.07 Dec. date 13.11.06 - TC 0614235 2 Years non use. In transit provisions apply

50 24.07.17

8419.90.00 PARTS, PICKLE LINE TANK, STEEL STRIP, being ANY of the following: (a) inlet pipes; (b) rinse spray bars; (c) reverse rinse spray bars; (d) steering unit spray bars; (e) steam jet rinse tanks Op. 01.01.07 Dec. date 13.11.06 - TC 0614236 2 Years non use. In transit provisions apply

50 24.07.17

8419.90.00 PARTS, PICKLE LINE TANK, being ANY of the following: (a) plummer blocks; (b) bridle couplings; (c) roll removal porter bars; (d) bearing block clamp brackets; (e) rolls; (f) load test frames Op. 01.01.07 Dec. date 14.11.06 - TC 0614239 2 Years non use. In transit provisions apply

50 24.07.17

8419.90.00 CYLINDERS, DRYING, PAPER AND/OR PAPERBOARD, chrome plated, having BOTH of the following: (a) diameter NOT less than 1 000 mm; (b) face width NOT less than 5 000 mm Op. 01.01.07 Dec. date 14.11.06 - TC 0614241 2 Years non use. In transit provisions apply

50 24.07.17

FOI Document #13

505050550502444.0.0.0.0.0.07.7.777 171717171717

505055050502444.0.00.0.0.07.777.7 171717171717


8419.90.00 FLUE TUBES, WATER HEATER, internal finned Op. 01.01.07 Dec. date 13.11.06 - TC 0614246 2 Years non use. In transit provisions apply

50 24.07.17

8419.90.00 PARTS, PICKLE LINE TANK, being ANY of the following: (a) tank sections; (b) flanges; (c) sparger mounting reinforcements; (d) seals; (e) backer bars; (f) rinse spray headers; (g) feed adapters; (h) clamp rings; (i) roll window keepers; (j) banjo plugs; (k) water trough overflows; (l) water trough overflow side walls; (m) field seam cap strips; (n) field seam corner reinforcements; (o) water troughs; (p) rinse exit chute keepers; (q) rinse tank strainers; (r) keeper plates and/or stop plates; (s) strip lifter seals; (t) wear plates; (u) drip trays; (v) flanged inlets; (w) supernozzles; (x) insulators; (y) covers; (z) gaskets; (aa) caps; (ab) spacers; (ac) washer bars; (ad) shims; (ae) flaps; (af) thermowells; (ag) drains; (ah) adjustable weirs; (ai) retainers; (aj) chocks; (ak) hanging brackets; (al) cover locater blocks; (am) covers; (an) spray headers; (ao) strainer plates and/or plate keepers; (ap) cover plates; (aq) drip pan carry over trays and/or tray brackets; (ar) cover lifters and/or cover lifter rods and/or cover lifter snap rings; (as) recovery tanks and/or break tanks; (at) steering units with covers; (au) granite dams and/or guides Op. 01.01.07 Dec. date 04.12.06 - TC 0614745 2 Years non use. In transit provisions apply

50 24.07.17

FOI Document #13

19 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette No TC 17/34, Wednesday, 09 Aug 2017


8419.90.00 PARTS, AIR QUENCH, CONTINUOUS STEEL STRIP PAINT LINE, being ANY of the following: (a) insulated panels and/or insulation; (b) ducts; (c) guard rails; (d) burner panels; (e) flat flashes; (f) supports Op. 01.01.07 Dec. date 30.11.06 - TC 0614763 2 Years non use. In transit provisions apply

50 24.07.17

8420.91.00 ROLLS, COOLING, CONTINUOUS STEEL STRIP PAINT LINE Op. 29.09.06 Dec. date 22.12.06 - TC 0615152 2 Years non use. In transit provisions apply

50 24.07.17

8454.90.00 PARTS, VACUUM DEGASS VESSEL, being torispherical dished ends Op. 30.08.06 Dec. date 01.12.06 - TC 0616283 2 Years non use. In transit provisions apply

50 24.07.17

8474.39.00 MIXERS, PASTE, LEAD ACID BATTERY, comprising ALL of the following: (a) batch weighers; (b) conveyors; (c) controllers; (d) dischargers; (e) discharge tanks; (f) discharge doors Op. 14.09.06 Dec. date 08.12.06 - TC 0617187 2 Years non use. In transit provisions apply

50 24.07.17

8519.81.41 PLAYERS/RECORDERS, cassette, having a single or twin decks, without internal power amplifier Op. 01.01.07 Dec. date 21.11.06 - TC 0614400 2 Years non use. In transit provisions apply

50 24.07.17

FOI Document #13

20 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette No TC 17/34, Wednesday, 09 Aug 2017


9503.00.20 DOLLS, having ALL of the following: (a) fine bisque porcelain head, arms and legs; (b) hand painted head with full make-up deco; (c) stuffed fabric torso; (d) portraying a real OR fictional character and accompanied by a background story; (e) permanetly-styled hair made from a blend of at least two different coloured fibres; (f) Certificate of Authenticity; (g) clothes and accessories made of at least two of the following: (i) embroidery and embroidery lace; (ii) wool gaberdine; (iii) cream poly lace; (iv) velvet; (v) brocade; (vi) tapestry brocade; (vii) printed metallic gold; (viii) mohair; (ix) moire taffeta jacquard; (x) cracked lame; (xi) quilted lame; (xii) fur; (xiii) silk material; (xiv) silk jacquard; (xv) silk ribbon; (xvi) satin; (xvii) French lace; (xviii) gold plated accesories; (xix) maribou feather accesories; (xx) ostrich feather accessories; (xxi) genuine leather boots or shoes Op. 01.01.07 Dec. date 27.11.06 - TC 0614596 2 Years non use. In transit provisions apply

50 24.07.17

9503.00.20 SETS, DOLL, INTERACTIVE, battery operated, having ALL of the following: (a) controllers; (b) music compact discs; (c) dance bases Op. 01.01.07 Dec. date 07.12.06 - TC 0614791 2 Years non use. In transit provisions apply

50 24.07.17

9503.00.91 VEHICLES, toy, road or off-road, with figures and moveable parts other than wheels but NOT including: (a) wooden trucks with wooden wheels; (b) plastic dump trucks Op. 01.01.07 Dec. date 27.11.06 - TC 0614722 2 Years non use. In transit provisions apply

50 24.07.17

FOI Document #13

505050505052444.0000.007.7.77.7.171717171717

21 Comptroller-General of Customs Initiated - TCOs Revoked Commonwealth of Australia Gazette No TC 17/34, Wednesday, 09 Aug 2017

Comptroller-Gener al of C ustoms Initi ated - TCOs R evoked

CUSTOMS ACT 1901

TARIFF CONCESSION ORDER REVOCATION AT THE INITIATIVE OF THE COMPTROLLER-GENERAL OF CUSTOMS

The Tariff Concession Orders listed in THE TABLE below have been revoked.

THE TABLE


8207.40.00 PARTS, COMPOSITE TOOL BODIES (HOLDERS), METAL WORKING, being ANY of the following: (a) anvil; (b) axial support; (c) bellevile washer; (d) cassette; (e) chipbreaker; (f) coolant adaptor; (g) drive key; (h) insert key; (i) boring head clamp pin; (j) plug; (k) setting gauge; (l) sleeve (NOT being tungsten carbide); (m) adjusting screw; (n) anvil screw; (o) arbor screw; (p) axial support screw; (q) blanking screw; (r) cassette screw; (s) locking screw; (t) retaining screw; (u) belleville washer screws; (v) wedge screw; (w) eccentric cam; (x) level pin; (y) clamp stud; (z) shim; (aa) shim pin; (ab) driving wedge; (ac) lock nut; (ad) punch; (ae) clamp; (af) shim screw; (ag) lock pins; (ah) boring bar clamp; (ai) toggle lever; (aj) retainer pin; (ak) nest; (al) support blade; (am) locating pin; (an) cartridge; (ao) clamping sleeve; (ap) wedge clamp holder; (aq) wedge clamp tool block; (ar) nozzles (NOT being tungsten carbide); (as) clamp; (at) wedge; (au) centre pin; (av) O ring; (aw) mounting washer (NOT being tungsten carbide); (ax) spring and pin; (ay) stop screw; (az) coolant deflector; (ba) magnetic sleeve; (bb) blade screw; (bc) taper pin; (bd) location roller; (Continued on next page)

50 04.07.17

FOI Document #13



(Continued from previous page) (be) eccentric pin; (bf) insert seat including cassette; (bg) top clamp; (bh) adjustment element Op. 29.06.98 Dec. date 11.09.98 - TC 9805626 TCO revoked as per Tariff Concession Gazette Notice TC 17/29 of 5 July 2017

8207.70.00 PARTS, COMPOSITE TOOL BODIES (HOLDERS), METAL WORKING, being ANY of the following: (a) anvil; (b) axial support; (c) bellevile washer; (d) cassette; (e) chipbreaker; (f) coolant adaptor; (g) drive key; (h) insert key; (i) boring head clamp pin; (j) plug; (k) setting gauge; (l) sleeve (NOT being tungsten carbide); (m) adjusting screw; (n) anvil screw; (o) arbor screw; (p) axial support screw; (q) blanking screw; (r) cassette screw; (s) locking screw; (t) retaining screw; (u) belleville washer screws; (v) wedge screw; (w) eccentric cam; (x) level pin; (y) clamp stud; (z) shim; (aa) shim pin; (ab) driving wedge; (ac) lock nut; (ad) punch; (ae) clamp; (af) shim screw; (ag) lock pins; (ah) boring bar clamp; (ai) toggle lever; (aj) retainer pin; (ak) nest; (al) support blade; (am) locating pin; (an) cartridge; (ao) clamping sleeve; (ap) wedge clamp holder; (aq) wedge clamp tool block; (ar) nozzles (NOT being tungsten carbide); (as) clamp; (at) wedge; (au) centre pin; (av) O ring; (aw) mounting washer (NOT being tungsten carbide); (ax) spring and pin; (ay) stop screw; (az) coolant deflector; (ba) magnetic sleeve; (bb) blade screw; (bc) taper pin; (bd) location roller; (be) eccentric pin; (Continued on next page)

50 04.07.17

FOI Document #13



(Continued from previous page) (bf) insert seat including cassette; (bg) top clamp; (bh) adjustment element Op. 29.06.98 Dec. date 11.09.98 - TC 9805623 TCO revoked as per Tariff Concession Gazette Notice TC 17/29 of 5 July 2017

8207.80.00 PARTS, COMPOSITE TOOL BODIES (HOLDERS), METAL WORKING, being ANY of the following: (a) anvil; (b) axial support; (c) bellevile washer; (d) cassette; (e) chipbreaker; (f) coolant adaptor; (g) drive key; (h) insert key; (i) boring head clamp pin; (j) plug; (k) setting gauge; (l) sleeve (NOT being tungsten carbide); (m) adjusting screw; (n) anvil screw; (o) arbor screw; (p) axial support screw; (q) blanking screw; (r) cassette screw; (s) locking screw; (t) retaining screw; (u) belleville washer screws; (v) wedge screw; (w) eccentric cam; (x) level pin; (y) clamp stud; (z) shim; (aa) shim pin; (ab) driving wedge; (ac) lock nut; (ad) punch; (ae) clamp; (af) shim screw; (ag) lock pins; (ah) boring bar clamp; (ai) toggle lever; (aj) retainer pin; (ak) nest; (al) support blade; (am) locating pin; (an) cartridge; (ao) clamping sleeve; (ap) wedge clamp holder; (aq) wedge clamp tool block; (ar) nozzles (NOT being tungsten carbide); (as) clamp; (at) wedge; (au) centre pin; (av) O ring; (aw) mounting washer (NOT being tungsten carbide); (ax) spring and pin; (ay) stop screw; (az) coolant deflector; (ba) magnetic sleeve; (bb) blade screw; (bc) taper pin; (bd) location roller; (be) eccentric pin; (bf) insert seat including cassette; (Continued on next page)

50 04.07.17

FOI Document #13



(Continued from previous page) (bg) top clamp; (bh) adjustment element Op. 29.06.98 Dec. date 11.09.98 - TC 9805624 TCO revoked as per Tariff Concession Gazette Notice TC 17/29 of 5 July 2017

FOI Document #13

25 About Border Watch Commonwealth of Australia Gazette No TC 17/34, Wednesday, 09 Aug 2017

If you have information about duty evasion related to Tariff Concession Orders (TCO), you can report your concerns to Border Watch at https://www.border.gov.au/borderwatch

Try to provide as much detail as you can so we are able to fully assess the information provided. Examples of concern might include:

Goods that claim a TCO but do not match the TCO description;

Goods that claim a TCO but do not match the TCO classification;

Incorrect information provided to the Comptroller-General on an application related to a Tariff Concession Order;

Undervaluation of goods claiming a TCO;

Incorrect volumes of goods claiming a TCO.

If you are aware of duty evasion in other programmes administered by the Australian Border Force, you can also report your concerns. You know your environment. If it doesn’t seem right, report it.

About Bor der Watch

Report revenue evasion – Tariff Concession Orders

Call Border Watch at freecall 1800 06 1800 or report online at http://www.border.gov.au/about/contact/report-suspicious-activities-behaviour/protection-customs-fraud-offences/border-watch-report-now

If you’re outside Australia or using a satellite phone call +61 2 6245 1325.

You can choose to remain anonymous and all information is treated confidentially.

FOI Document #13

SPC ARDMONA OPERATIONS LIMITED

Customs Act 1901

.

FOI Document #14

s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

s47F

s22(1)(a)(ii)

Supervisor Tariff Concessions | Australian Border Force | Department of Immigration and Border ProtectionTel. No. 02 | Email

FOI Document #14

s22(1)(a)(ii) s22(1)(a)(ii)

s22(1)(a)(ii)

FOI Document #15

s47F

s47F

s47Fs47F

FOI Document #15

FOI Document #15

s47F s47F

s47F

Supervisor Tariff Concessions | Australian Border Force | Department of Immigration and Border ProtectionTel. No. 02 Fax No. 02 6223 8180 | Email

FOI Document #16

s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii) s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

s47F

s22(1)(a)(ii)

s47F

s47F

SPC ARDMONA OPERATIONS LIMITED

FOI Document #16

s22(1)(a)(ii) s22(1)(a)(ii)

s47F

s47F

s47F

Customs Act 1901

.

Supervisor Tariff Concessions | Australian Border Force | Department of Immigration and Border ProtectionTel. No. 02 | Email

FOI Document #16

s22(1)(a)(ii) s22(1)(a)(ii)

s22(1)(a)(ii)

FOI Document #17

s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

s47F

FOI Document #18

s22(1)(a)(ii)

s47F

s47F

s47F

s22(1)(a)(ii)

FOI Document #19

s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

s47F

FOI Document #19

s47F s47F s47F

s47F

FOI Document #19

FOI Document #20

s22(1)(a)(ii)

s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

s22(1)(a)(ii)

s47F

s47F

s47F s47F s47F

s47F

FOI Document #20

s47F

s47F s47F

s47F

s47F

s47F

s47F

s47F

s47F

This email (including any attachments) is confidential and may be privileged. It may be read, copied and used only by the intended recipient. If you have received it in error, please contact the sender immediately by return email. Please then delete both emails and do not disclose their contents to any person. We believe, but do not warrant, that this email and any attachments are virus free. You should take full responsibility for virus checking. SPC reserves the right to monitor all email communications through its networks. If the content of this email is personal or unconnected with our business, we accept no liability or responsibility for it.

FOI Document #20

s47F

s47F

s47F

s47F

s47F

s47F

s47F

FOI Document #20

s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

s47F

FOI Document #20

s47F

s47F

s47F s47F

FOI Document #20

FOI Document #21

s22(1)(a)(ii)

s47F

s47F

s47F

s47F

s47F

s47F

s47F

s47F

s47F

s47F



FOI Document #21

s47F

s47F

s47F

s47F

s47F

s47F

s22(1)(a)(ii)

s47F

s47F

rrecececccccceieieieieieieieivevvvvv d d d d d dd d itititititititit eeeveeeeeeee,,,,,,,, bbbut t t t t t tt dodododododododo emememmmmmmaiaiaiaiaiaiaiailll lllll

ittt.

FOI Document #21

s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

s47F

s47F

s47F s47F s47F

s47F

s47F


FOI Document #21

s47F s47F

s47F

s47F

s47F

s47F

s47F

s47F

s47F

s47F

s47F

rrecececccccceieieieieieieieivevevevevvved ddd dd d d itititititititit eeeveeeeeeee,,,,,, bubbbbbb t ttt ttt t dodododododdodo emememmmmmmaaaaiaaaa l

ittt.

CAUTION: This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message, you are hereby notified that any use, dissemination, distribution, or reproduction of this message is prohibited. If you have received this message in error, please notify the local office of Coca-Cola Amatil Limited immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of Coca-Cola Amatil Limited.

FOI Document #21

s47F

s47F

s47F

s47F

Consideration of an application for a Tariff Concession Order lodged under subsection 269F

of the Customs Act 1901

Making of a Tariff Concession Order

Statement of reasons

TC 1773340

I, , delegate of the Comptroller General of Customs, have considered, in terms of subsection 269P of the Customs Act 1901 (the Act), an application for atariff concession order (TCO) lodged under subsection 269F of the Act.

Having regard to:

- the TCO application;- all submissions lodged with the Comptroller General before the last day for

submissions; - any information that may have been supplied or produced to the Comptroller

General, including in accordance with a notice under subsection 269M(4); and - any inquiries made by the Comptroller General;

I am satisfied that the application meets the core criteria as defined in section 269C of the Act in that on the day on which the application was lodged, no substitutable goods were produced in Australia in the ordinary course of business.

I have also had regard to section 269SJ of the Act which describes certain goods for which a TCO must not be made. I am satisfied that there are no exclusions applicable to the goods the subject of the TCO application.

Dated this 27th day of October 2017

Delegate of the Comptroller General Of Customs

FOI Document #22

s22(1)(a)(ii)

s22(1)(a)(ii)

rr

FOI Document #23

s22(1)(a)(ii)

s22(1)(a)(ii)

Reply to Comptroller General of Customs

Quote: TC 1773340Your Ref: 26/78

Department of Immigration & Border ProtectionPO Box 25Belconnen ACT 2616Ph: (02) Fax: (02) 223 8180Email: [email protected]

27 October 2017

TRADE CONSULTANTS (N.S.W.) PTY. LIMITED1 HURFORD PLACEORANGE NSW 2800

Dear

TARIFF CONCESSION SYSTEMAPPLICATION SUCCESSFUL

I refer to your application for Tariff Concession Order (TCO) Number TC 1773340 lodged on 7July 2017.

As a delegate of Comptroller-General of Customs I am satisfied that the application meets the core criteria on the basis of section 269C of the Customs Act 1901 and have accordingly made a written Tariff Concession Order.

The decision to make a TCO will be published in Gazette Number TC17/46 of 1 November 2017.

The TCO, as detailed in the attachment, will also be published in the Schedule of Concessional Instruments as soon as possible.

Yours sincerely,


FOI Document #24

s22(1)(a)(ii)

s22(1)(a)(ii)

s47F

s47F

(16.11.17)

Description of the Particular goods including the applicable subheading of the Customs Tariff Schedule 4 ItemLast day of effect

7309.00.00 TANKS, ASEPTIC, VACUUM, including ALL of the following:(a) maximum internal pressure NOT less than 5 bars;(b) volume capacity NOT less than 2 000 L;(c) operating nitrogen pressure NOT less than 0.2 bars and NOT

greater than 0.4 bars;(d) elliptically shaped upper tank head AND conically shaped

lower tank bottom;(e) air AND nitrogen connection ports;(f) aseptic pneumatic valves;(g) feeder pipe sight glass;(h) inspection manhole

Op. 07.07.17 Dec. date 27.10.17 - TC 1773340

50

FOI Document #24

1 17)

Tariff Concession Order 1773340 - Home Affairs

Documents

Transcript of Tariff Concession Order 1773340 - Home Affairs