Some specific examples of products that are ineligible for the

- 1 -

Some specific examples of products that are ineligible for the Air Transhipment Cargo Exemption Scheme for Specified Strategic Commodities

The followings are some specific examples of products that are ineligible for the Air Transhipment Cargo Exemption Scheme for Specified Strategic Commodities (SCTREX). The list is indicative rather than exhaustive. Products not on the list should not automatically be regarded as being exempted from the licensing requirement under the Scheme. Importers/Exporters should approach the Trade and Industry Department and make use of the Pre-classification Service in case of doubt in the control status of the goods. This list will be updated where necessary to provide most up-to-date examples for traders’ reference. In times of update of the Hong Kong Control List, the examples provided below will be further revised as appropriate to reflect the latest examples of products not ineligible for the SCTREX. The latest released list should supersede the preceding version. Brand Name Model Number Product Description Dual-use Goods List Category 0 : Nuclear Materials, Facilities and Equipment AREVA NA 17X17 HARMONI RCCA TYPE FOR 900MWE FUEL

ASSEMBLIES INB NA MONAZITE INTERWESTMA NA MONAZITE NA NA URANIUM ORE CONCENTRATE NA NA COLUMBITE (CONTAINING >= 0.1% URANIUM OR

>= 3% THORIUM) NA NA TANTALITE (CONTAINING >= 0.1% URANIUM OR

>= 3% THORIUM) NA NA TANTALUM CONCENTRATE (CONTAINING >=

0.1% URANIUM OR >= 3% THORIUM) NA NA TANTALUM CONCENTRATES (CONTAINING >=

0.1% URANIUM OR >= 3% THORIUM) NA NA ENRICHED URANIUM HEXAFLUORIDE (UF6) NA NA FUEL ELEMENTS ENRICHED WITH 19.95% MAX

U235 NA NA ENRICHED URANIUM DIOXIDE NA NA TARGETS ENRICHED WITH 19.95% MAX U235 NA NA URANIUM CONTAINED IN U3O8 NA TNF-XI RADIOACTIVE MATERIAL, EXCEPTED PACKAGE,

- 2 -

Brand Name Model Number Product Description PACKAGE EMPTY PACKAGING (LAST CONTAINED UO2)

ALDRICH 151858 CHLOROFORM-D 100% 99.96 ATOM % D ALDRICH 151874 DIMETHYL SULFOXIDE-D6 99.9 ATOM % D ALDRICH 151882 DEUTERIUM OXIDE 99.9 ATOM % D ALDRICH 176044 NAPHTHALENE-D8 99 ATOM% D ALDRICH 225789 CHLOROFORM-D 99.8 ATOM % D CONTAINS

0.03% (V/V) TMS ALDRICH 372072 SODIUM DEUTEROXIDE 40 WT % IN D2O 99.5

ATOM % D ALDRICH 434388 TOLUENE-D8 99.6 ATOM% D 2 X 10G ALDRICH 450510 DEUTERIUM OXIDE 99.9 ATOM % D CONTAINS

0.05% 3-(TRIMETHYLSILYL) PROPIONIC-2,2,3,3-D4 ACID SODIUM SALT

ALDRICH 491608 4-NITROPHENOL-2 3 5 6-D4 98 ATOM % D 98% (CP) ALDRICH 532975 PYRIDINE-D5 99.5 ATOM % D CAMBRIDGE ISOTOPE LABORATORIES

DLM-2622-1 DL-1,4-DITHIOTHREITOL (D10,98%)

CAMBRIDGE ISOTOPE LABORATORIES

DLM-27-5X1 2,2,2,-TRIFLUOROETHANOL-D3 (D,99%)

CAMBRIDGE ISOTOPE LABORATORIES INC

NA METHANOL-D4 (D, 99.8%)


NA DIMETHYL SULFOXIDE-D6 (D, 99.9%)


NA CHLOROFORM-D (D 99.8%) + SILVER FOIL

LINDE NA <5% DEUTERIUM IN NITROGEN NA NA DEUTERIUM NA NA 3% DEUTERIUM BALANCE NITROGEN SIGMA-ALDRICH 151823 CHLOROFORM-D 99.8 ATOM % D

- 3 -

Brand Name Model Number Product Description SIGMA-ALDRICH 151831 CHLOROFORM-D 99.8 ATOM% D, CONTAINS 1%

(V/V) TMS SIGMA-ALDRICH 151858 CHLOROFORM-D 100% 99.96 ATOM % D SIGMA-ALDRICH 151874 DIMETHYL SULFOXIDE-D6 99.9 ATOM % D SIGMA-ALDRICH 151882 DEUTERIUM OXIDE 99.9 ATOM % D SIGMA-ALDRICH 164488 SODIUM DEUTEROXIDE 30 WT % IN D2O 99

ATOM % D SIGMA-ALDRICH 176044 NAPHTHALENE-D8 99 ATOM% D SIGMA-ALDRICH 176567 ACETALDEHYDE-D4 98 ATOM % D SIGMA-ALDRICH 177865 DICHLOROMETHANE-D2 99.5 ATOM % D SIGMA-ALDRICH 184314 TETRAHYDROFURAN-D8 99.5 ATOM % D 1 X 5G SIGMA-ALDRICH 189979 N,N-DIMETHYLFORMAMIDE-D7 (99.5 ATOM % D) SIGMA-ALDRICH 225789 CHLOROFORM-D 99.8 ATOM % D CONTAINS

0.03% (V/V) TMS SIGMA-ALDRICH 333786 L-DOPA-(PHENYL-D3) 98 ATOM % D SIGMA-ALDRICH 336459 GLYCINE-2,2-D2 SIGMA-ALDRICH 366897 PALMITIC ACID-D31 SIGMA-ALDRICH 422878 METHANOL-D4 99 ATOM % D SIGMA-ALDRICH 426229 FORMIC ACID-D2 SIGMA-ALDRICH 434388 TOLUENE-D8 99.6 ATOM% D SIGMA-ALDRICH 441384 METHANOL-D4 99.8 ATOM % D SIGMA-ALDRICH 444863 ACETONE-D6 99.9 ATOM %D SIGMA-ALDRICH 489158 TRIETHYL (SILANE-D) 97 ATOM % D SIGMA-ALDRICH 492620 FORMALDEHYDE-D2 SOLUTION ~20WT% IN D2O

98 ATOM % D SIGMA-ALDRICH 494275 CHLOROFORM-D 100%, 99.96 ATOM % D

CONTAINS 0.03% (V/V) TMS SIGMA-ALDRICH 532975 PYRIDINE-D5 99.5 ATOM % D SIGMA-ALDRICH 596388 FORMALDEHYDE-13C, D2 SOLUTION SIGMA-ALDRICH 700428 N,N-DIMETHYLFORMAMIDE-D7 (D 99.5%) Category 1 : Special Materials and Related Equipment BESFIGHT STS-24K CARBON FIBER YARN GRAFIL 34-700 24K CARBON FIBER FILAMENT CONTINUOUS TOW GRAFIL 34-700WD 24K CARBON FIBER FILAMENT CONTINUOUS TOW GRANOC XN-60-60S PITCH BASED CARBON FIBER YARN GRANOC XN-60-A2S PITCH BASED CARBON FIBER YARN

- 4 -

Brand Name Model Number Product Description GRANOC YSH-60A-60S PITCH BASED CARBON FIBER YARN MITSUBISHI TR50S-15L CARBON FIBER TOW MITSUBISHI RAYON

TR50S-15L CARBON FIBER TOW

PYROFIL HR40-12M CARBON FIBER TOW SIZE CODE D PYROFIL HR40-12M CARBON FIBER TOW PYROFIL HS40-12P CARBON FIBER TOW PYROFIL MR60H-24P CARBON FIBER TOW SIZE CODE A PYROFIL MR60H-24P CARBON FIBER TOW PYROFIL MR70-12P CARBON FIBER TOW PYROFIL TR50S-15L CARBON FIBER TOW SIZE CODE J PYROFIL TR50S-15L CARBON FIBER TOW PYROFIL TRW40-50L CARBON FIBER TOW TAIRYFIL TC33-3K CARBON FIBER YARN TAIRYFIL TC33-6K CARBON FIBER YARN TAIRYFIL TC-35-12000 CARBON FIBER YARN TAIRYFIL TC35-12K CARBON FIBER YARN TAIRYFIL TC35-12K CARBON FIBER FILAMENT TAIRYFIL TC35-3K CARBON FIBER YARN TAIRYFIL TC35-6K CARBON FIBER YARN TAIRYFIL TC36S-12K CARBON FIBER YARN TAIRYFIL TC36S-24K CARBON FIBER YARN TENAX HTA40 E13

12K CARBON FIBER FILAMENT

TENAX IMS40 E13 12K 680TEX

CARBON FIBER YARN

TENAX IMS60 E13 24K 830TEX

CARBON FIBER YARN

TENAX STS40 F13 24K 1600TEX

CARBON FIBER YARN

TENAX UTS50 F22 12K 800TEX

CARBON FIBER YARN

TENAX UTS50 F22 12K 800TEX S

CARBON FIBER YARN

TOHO IMS40 E13 12K 680TEX

CARBON FIBER YARN

- 5 -

Brand Name Model Number Product Description TOHO UTS50 F22 12K

800TEX S CARBON FIBER YARN

TOHO TENAX HTS40 E13 3K 200TEX

CARBON FIBER YARN


CARBON FIBER YARN


CARBON FIBER FILAMENT

TOHO TENAX HTS40 F22 12K 800TEX S

CARBON FIBER YARN

TOHO TENAX HTS40 F23 3K 200TEX

CARBON FIBER YARN

TOHO TENAX IMS60 E13 24K 830TEX

CARBON FIBER YARN

TOHO TENAX IMS65 E23 24K 830TEX

CARBON FIBER YARN

TOHO TENAX STS40 F13 24K 1600TEX S

CARBON FIBER YARN

TOHO TENAX UMS40 F23 24K 800TEX S

CARBON FIBER YARN

TOHO TENAX UTS50 F22 12K 800TEX S

CARBON FIBER YARN

TOHO TENAX UTS50 F24 24K 1600TEX

CARBON FIBER YARN

TOHO TENAX UTS50 F24 24K 1600TEX D

CARBON FIBER YARN

TOHO TENAX UTS50 F24 24K 1600TEX DCP

CARBON FIBER YARN

TORAYCA M30SC-18000-50C

CARBON FIBER YARN

TORAYCA M30SC-18000-50C(L)

CARBON FIBER YARN

TORAYCA M40JB-12000-50B

CARBON FIBER YARN

TORAYCA M40JB-6000-50B

CARBON FIBER YARN

TORAYCA M40JB-6000-50 CARBON FIBER YARN

- 6 -

Brand Name Model Number Product Description B(L)

TORAYCA M40SC-12000-50C

CARBON FIBER YARN

TORAYCA T300B-3000-40B

CARBON FIBER YARN

TORAYCA T300B-6000-50B

CARBON FIBER YARN

TORAYCA T620SC-24000-50C(Z)

CARBON FIBER YARN

TORAYCA T700SC-12000-50C

CARBON FIBER YARN

TORAYCA T700SC-12000-50C (L)

CARBON FIBER YARN

TORAYCA T700SC-12000-50C(L)

CARBON FIBER YARN

TORAYCA T700SC-12000-H0C

CARBON FIBER YARN

TORAYCA T700SC-24000-50C

CARBON FIBER YARN

TORAYCA T700SC-24000-50C(K)

CARBON FIBER YARN

TORAYCA T700SC-24000-50C(L)

CARBON FIBER YARN

TORAYCA T700SC-24000-50C(Z)

CARBON FIBER YARN

TORAYCA T800HB-6000-40B(Z)

CARBON FIBER YARN

TORAYCA T800SC-24000-10E

CARBON FIBER YARN

TORAYCA T800SC-24000-10E(L)

CARBON FIBER YARN

TORAYCA T800SC-24000-10E(Z)

CARBON FIBER YARN

NEWPORT HMT701 34-700

NEWPORT HMT701 FTP (FLAT TOWPREG)

TOWPREG RCX0125-BL/T700SC-24K-50C

PRE-IMPREGNATED CARBON FIBER FILAMENT

- 7 -

Brand Name Model Number Product Description /30%

SIGMA-ALDRICH 254118 MAGNESIUM CHIPS 4-30 MESH 99.98% SIGMA-ALDRICH 556130 BISMUTH PIECES 1-12MM 99.999% TRACE

METALS BASIS SIGMA-ALDRICH 202770 BERYLLIUM OXIDE 99.98% SIGMA-ALDRICH 203394 HAFNIUM (IV) OXIDE CERAC INC. Z-1024 ZIRCONIUM METAL SIGMA-ALDRICH 204994 ZIRCONIUM (IV) OXIDE 99.99% SIGMA-ALDRICH 221880 ZIRCONIUM (IV) CHLORIDE >=99.5% SIGMA-ALDRICH 579211 TETRAKIS(DIMETHYLAMIDO)ZIRCONIUM(IV) MODEC INC NA PIPE SCALE RESIDUES CONTAINING RADIUM

SULFATE (RA-226 AND RA-228) VALE NA NICKEL POWDER >99% (1-8 MICRON) VALE CANADA LTD

NA CGNP NICKEL POWDER

VALE CANADA LTD

T123 NICKEL POWDER

VALE INCO NA NICKEL POWDER TYPE 123 H-GRADE (3.5 TO 4 MICRON)

Category 2 : Materials Processing ULVAC MLX-3000N SPUTTERING MACHINE +GF+ AGIECHARMILLES

HPM1150U HIGH PERFORMANCE MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC530 MC422B

+GF+ AGIECHARMILLES

MIKRON HPM 1350U

MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC530 MC422D

+GF+ AGIECHARMILLES

MIKRON HPM600U

MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC530

+GF+ AGIECHARMILLES

MIKRON HSM200U LP


ALZMETALL GS650/5-T VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC530

- 8 -

Brand Name Model Number Product Description APEC G3020-5L 5-AXIS GANTRY TYPE MACHINING CENTER,

MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC530

APEC G3050-5L 5-AXIS HIGH SPEED GANTRY TYPE MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN 586084-03 SIK ITNC HSCI

BROTHER TC-S2DN-S CNC TAPPING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS BROTHER CNC-B00

DECKEL MAHO DMC 1035V VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC 530

DECKEL MAHO DMF 500 LINEAR

TRAVELLING COLUMN MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC530

DECKEL MAHO DMU 100 P DUOBLOCK

MILLING MACHINE WITH NC ROTARY TABLE AND SWIVEL SPINDLE, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC 530 HSCI


UNIVERSAL MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC530 HSCI

DECKEL MAHO DMU 160 FD DUOBLOCK

UNIVERSAL MILLING AND TURNING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840D SOLUTIONLINE FD

DECKEL MAHO DMU 210 P UNIVERSAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840 D SOLUTIONLINE OPERATE

DECKEL MAHO DMU 340 P UNIVERSAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840D SOLUTIONLINE OPERATE

DECKEL MAHO DMU 50 UNIVERSAL MILLING MACHINE WITH ADDITIONAL OPTIONS, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC 530

DECKEL MAHO DMU 50 UNIVERSAL MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN

- 9 -

Brand Name Model Number Product Description ITNC 530

DECKEL MAHO DMU 60 MONOBLOCK

UNIVERSAL MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC 530 HSCI


UNIVERSAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC 530 HSCI


UNIVERSAL MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC 530 HSCI

DECKEL MAHO DMU 80 P2 DUOBLOCK

UNIVERSAL MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC 530

DECKEL MAHO HSC 75 LINEAR

PRECISION CENTRE, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC 530


PRECISION CENTRE, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC 530 HSCI

DMG MORI SEIKI NVX5080/40 HIGH-PRECISION VERTICAL MACHINING CENTER WITH NIKKEN 5AX-250HMA ROTARY TABLE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI FCA730UM-B

EMMEGI SATELLITE XL 10000

5-AXIS CNC MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS ISAC UN20107M40

FOOKE ENDURA PRO CNC GANTRY MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS SINUMERIK 840D

HORKOS NS-70 MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 0I-MD

HOWA HMP-P455HC1J

MACHINING CENTER WITH TSUDAKOMA RT-184 ROTARY TABLE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

MAKINO D300 5-AXIS VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 5

MAKINO MAG1 5-AXIS HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS

- 10 -

Brand Name Model Number Product Description MAKINO PROFESSIONAL 5

MARIO CARNAGHI HG30 MACHINING CENTRE, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840DSL

MATSUURA MX-520 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MATSUURA G-TECH 31I-A5

MATSUURA MX-850 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MATSUURA G-TECH 31I

MATSUURA V.PLUS-550 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MATSUURA G-TECH 30I

MAZAK INTEGREX 300-IV (2500U)

CNC LATHE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZATROL MATRIX CONTROL

MAZAK INTEGREX I-150

HORIZONTAL CNC LATHE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZATROL MATRIX CONTROL

MAZAK INTEGREX I-200S(1000U)

CNC LATHE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX 2 CONTROL

MAZAK VARIAXIS 500-5X II

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX CONTROL

MAZAK VARIAXIS I-600

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX 2 CONTROL

MAZAK VARIAXIS I-600

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL SMOOTHX CONTROL

MAZAK VARIAXIS J-600/5X

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX 2 CONTROL

OKUMA MCR-A5C DOUBLE COLUMN MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OSP-P200MA-H

PAOLINO BACCI ARTIST-S WOODWORKING MACHINE, MODEL NO. OF

- 11 -

Brand Name Model Number Product Description S.R.L. NUMERICAL CONTROL UNIT IS OSAI/PRIMA

ELECTRONICS 10/510 MECHATROLINK PAOLINO BACCI S.R.L.

MASTER CNC MACHINING CENTRE, MODEL NO. OF NUMERICAL CONTROL UNIT IS GE FANUC 31I-A5

PAOLINO BACCI S.R.L.

SHARP L CNC MACHINING CENTRE, MODEL NO. OF NUMERICAL CONTROL UNIT IS OSAI/PRIMA ELECTRO SPA 10/510 MECHATROLINK

PRECITRAME MTR312 CNC ROTARY TRANSFER MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 30IB

QUASER MF400C/10C 5-AXES MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 828D

ROEDERS RXD5C HIGH SPEED DENTAL MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS ROEDERS RMS6

ROEDERS RXP500DS HIGH SPEED MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS ROEDERS RMS6

SPINNER U5-620 UNIVERSAL 5-AXIS MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN TNC620

STARRAG STC 800 5-AXIS MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS SINUMERIK 840D

TOSHIBA MPC-3680EII DOUBLE COLUMN TYPE MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS TOSHIBA TOSNUC 999

TOSHIBA MACHINE

MP-2618 (5C) HIGH SPEED 5-AXES BRIDGE-TYPE DIE & MOLD MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS TOSHIBA MACHINE TOSNUC 999

TOSHIBA MACHINE

UVM-700C(5A) HIGH PRECISION VERTICAL MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 30I-B

WILLEMIN 408MT MILLING/TURNING 5-AXIS MACHINING CENTRE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31IA5

YAMAZAKI MAZAK

INTEGREX I-300 (1500U)

CNC LATHE, MODEL NO. OF NUMERICAL CONTROL UNIT IS YAMAZAKI MAZAK

- 12 -

Brand Name Model Number Product Description MAZATROL MATRIX 2

YASDA YBMVI40 CNC JIG BORER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B5

+GF+ AGIECHARMILLES

MIKRON HPM600HD


+GF+ AGIECHARMILLES

MIKRON HPM600U

MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS SINUMERIK 840D SL

+GF+ AGIECHARMILLES

MIKRON HSM500 LP


+GF+ AGIECHARMILLES

MIKRON HSM500 LP PRECISION


+GF+ AGIECHARMILLES

MIKRON MILL S 500


CHARLES MVC-955 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 0I-MD

DECKEL MAHO DMC 100 H DUOBLOCK

HORIZONTAL MACHINING CENTRE, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840D SOLUTIONLINE OPERATE

DECKEL MAHO DMC 55 H DUOBLOCK

HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840 D SOLUTIONLINE OPERATE

DECKEL MAHO DMF 260-11 TRAVELLING COLUMN MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840D


HSC-PRECISION CENTRE, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC 530 HSCI


HSC PRECISION CENTRE, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC 530 HSCI

DMG MORI NV4000DCG VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

- 13 -

Brand Name Model Number Product Description DMG MORI NVD5000A1A/

40 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

DMG MORI NVD5000A1B/40

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

DMG MORI NVX7000/40 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

DMG MORI SEIKI NHX4000 HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI FCA730BM-B

DMG MORI SEIKI NHX8000 HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-A

DMG MORI SEIKI NV4000DCG VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

DMG MORI SEIKI NV5000A1A/40 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

DMG MORI SEIKI NV5000A1B/40 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

DMG MORI SEIKI NV5000A1B/50 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

DMG MORI SEIKI NVD4000DCG VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

DMG MORI SEIKI NVD5000A1A/40

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC F31IB

DMG MORI SELKI NLX2000SY/500

CNC LATHE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI FCA730BM-B

FEELER VTM415 VERTICAL TURNING MILLING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI M70A

HELLER H 5000 MC HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840DSL

HELLER MCH400S HORIZONTAL MACHINING CENTER WITH ROTARY TABLE, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840D POWERLINE

HOWA MKN-P355VCJ MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-A

HULLER HILLE NBH 500 HORIZONTAL MACHINING CENTER, MODEL NO.

- 14 -

Brand Name Model Number Product Description OF NUMERICAL CONTROL UNIT IS SIEMENS 840 DE SL

KASHIFUJI KY20 CNC PRECISION TURN-MILL MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI M70V-A

KITAMURA MYCENTER-3XG

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI ARUMATIK-MI

KURAKI KBT-11EZ TABLE TYPE CNC HORIZONTAL BORING & MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-A5

MAG XS 211 MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I

MAG XS 321 MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I

MAKINO A51NX HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 5

MAKINO A61NX CNC HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 5

MAKINO A71 CNC HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 5

MAKINO A82 CNC HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 5

MAKINO ANC-3H2A-85 MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL A

MAKINO ANC-3H2A-85 CNC MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL A

MAKINO E33 GRAPHITE MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC A02B-0307-B621

MAKINO F3 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC

- 15 -

Brand Name Model Number Product Description PROFESSIONAL 5

MAKINO F5 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC PROFESSIONAL 5

MAKINO F8 CNC VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC PROFESSIONAL 5

MAKINO F9 CNC VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC AB19887-002

MAKINO J3 CNC HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL L

MAKINO J3 FORMULA CNC HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL L


MAKINO J4M CNC HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL L


MAKINO L2 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL L

MAKINO MCC1513 HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 5

MAKINO PS95 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC

MAKINO V22 CNC VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 5

MAKINO V33 VERTICAL MACHINING CENTER, MODEL NO. OF

- 16 -

Brand Name Model Number Product Description NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 3

MAKINO V33I VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 5


MAKINO V33I GRAPHITE

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 5

MAKINO V56I CNC VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 5


MAKINO V77 CNC VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 5

MAKINO V77L CNC VERTICAL MACHINING CENTRE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 5

MAKINO V99L CNC VERTICAL MACHINING CENTRE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAKINO PROFESSIONAL 5

MANFORD VF-550 HIGH SPEED MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI M70B-2A/8.4

MATSUURA LUMEX 25C METAL LASER SINTERING MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MATSUURA L-TECH 840DI

MATSUURA LUMEX AVANCE-25

METAL LASER SINTERING HYBRID MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MATSUURA I-TECH AVANCE

MATSUURA LV-500 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MATSUURA

- 17 -

Brand Name Model Number Product Description L-TECH 30IB

MATSUURA R.PLUS-550 MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MATSUURA G-TECH 30I



MATSUURA V.PLUS-800 MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MATSUURA G-TECH 30I

MATSUURA VX-1000 CNC VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31IB

MATSUURA VX-1000 CNC VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-A

MAZAK FJV-250II VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX NEXUS 2 CONTROL

MAZAK FJV-35/60 II VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX NEXUS 2 CONTROL

MAZAK FJV-60/120 II VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX NEXUS 2 CONTROL

MAZAK FJV-60/80II VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX NEXUS 2 CONTROL

MAZAK HORIZONTAL CENTER NEXUS 10800-II

HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX NEXUS 2 CONTROL

MAZAK HORIZONTAL CENTER

HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZATROL

- 18 -

Brand Name Model Number Product Description NEXUS 5000-II MATRIX NEXUS CONTROL


HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX NEXUS CONTROL


HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZATROL MATRIX NEXUS CONTROL


HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX NEXUS 2 CONTROL


HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZATROL MATRIX NEXUS CONTROL


HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZATROL MATRIX NEXUS 2 CONTROL

MAZAK INTEGREX I-400S (1500U)

HORIZONTAL CNC LATHE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL SMOOTHX CONTROL

MAZAK INTEGREX J-400 (650U)

CNC LATHE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX NEXUS CONTROL

MAZAK MAZATECH V-815/120 II

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX NEXUS 2 CONTROL

MAZAK MAZATECH V-815/80

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL PC-FUSION-CNC 640M CONTROL

MAZAK MAZATECH V-815/80

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL FUSION 640M CONTROL

MAZAK MAZATECH V-815/80 II

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX NEXUS 2 CONTROL

MAZAK QUICK TURN NEXUS 200-II MSY

CNC LATHE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX NEXUS 2 CONTROL

- 19 -

Brand Name Model Number Product Description MAZAK UN-600H HORIZONTAL MACHINING CENTER, MODEL NO.

OF NUMERICAL CONTROL UNIT IS FANUC 32I CONTROL

MAZAK VCU-400T VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL MATRIX NEXUS 2

MAZAK VERTICAL CENTER NEXUS 430A-II HS

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZATROL MATRIX NEXUS 2 CONTROL

MAZAK VERTICAL CENTER SMART 430A

MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL SMART CONTROL

MAZAK VERTICAL CENTER SMART 530C

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MAZAK MAZATROL FZ CONTROL

MITSUBISHI MICRO V1 HIGH PRECISION MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

MITSUI SEIKI HU63A HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-A

MITSUI SEIKI HU80A CNC HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

MITSUI SEIKI HU80A HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-A5

MORI SEIKI NH4000DCG HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-A

MORI SEIKI NH6300DCGII HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC SERIES 31I-A

MORI SEIKI NHX8000 HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-A

MORI SEIKI NV4000DCG HIGH PRECISION VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

MORI SEIKI NV5000?1A/40 VERTICAL MACHINING CENTER, MODEL NO. OF

- 20 -

Brand Name Model Number Product Description NUMERICAL CONTROL UNIT IS FANUC 31I-B

MORI SEIKI NV5000A1A/40 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

MORI SEIKI NVD4000DCG VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

MORI SEIKI NVD4000DCG CNC VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MSX-501

MORI SEIKI NVD5000A1A/40

VERTICAL MACHINING CENTRE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

MORI SEIKI NVX5060II/40 HIGH PRECISION VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI FCA730BM-B

OKK GR400 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

OKK VM76R VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

OKK VP600 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

OKUMA LB2000EXII CNC LATHE, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P200L




OKUMA MA-550VB VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P300M

OKUMA MA-550VB-S VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P300M

OKUMA MB-46VA VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P300M

OKUMA MB-46VAE VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA

- 21 -

Brand Name Model Number Product Description OSP-P300M

OKUMA MB-5000H HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P300M

OKUMA MB-56VA VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P300M

OKUMA MB-56VB VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P300M

OKUMA MB-8000H HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P300M

OKUMA MCR-A5CII DOUBLE COLUMN MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P300M

OKUMA MCR-AF DOUBLE COLUMN MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P300M

OKUMA MILLAC 1052V II

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P200MA

OKUMA MILLAC 1052V II

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P300M

OKUMA MILLAC 1052VII


OKUMA MILLAC 611VII


OKUMA MILLAC 761VII


OKUMA MILLAC 761VII

VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P300M

OKUMA MILLAC 852VII


OKUMA MP-46V VERTICAL MACHINING CENTER, MODEL NO. OF

- 22 -

Brand Name Model Number Product Description NUMERICAL CONTROL UNIT IS OKUMA OSP-P300M

OKUMA MULTUS B300II

CNC LATHE, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P300S

OKUMA MULTUS B400II

CNC LATHE, MODEL NO. OF NUMERICAL CONTROL UNIT IS OKUMA OSP-P300S

OR VCENTER-70APC

CNC VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 0I-MD

QUICK JET AV-128 DOUBLE COLUMN HIGH SPEED DIE/MOLD CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840D

QUICK JET HMT HORIZONTAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 828D

QUICK JET QJM-VL1 MICRO MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840D

ROEDERS RXP500 HIGH SPEED MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS ROEDERS RMS6

ROEDERS RXP801 HIGH SPEED MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS ROEDERS RMS6

ROEDERS RXU1000 HIGH SPEED MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS ROEDERS RMS6

ROEDERS RXU1200 HIGH SPEED MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS ROEDERS RMS6

ROEDERS GMBH RXP500 HIGH SPEED MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS ROEDERS RMS6

ROKU-ROKU ANDROID ULTRA PRECISION MICRO FINE MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL INIT IS FANUC 31I-B5

ROKU-ROKU CEGAIII-542 MICRO FINE MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL INIT IS FANUC 31I-A5

ROKU-ROKU CEGAIII-542 HIGH PRECISION HIGH SPEED FINE MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B5

ROKU-ROKU CEGA-SS300 HIGH PRECISION HIGH SPEED FINE MILLING MACHINE, MODEL NO. OF NUMERICAL

- 23 -

Brand Name Model Number Product Description CONTROL UNIT IS FANUC 31I-B5

ROKU-ROKU HC-658 HIGH-SPEED HIGH-PRECISION MULTI-PURPOSE MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-A5

ROKU-ROKU HORNET HIGH PRECISION MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-A5

ROKU-ROKU MEGA-S400 HIGH PRECISION HIGH SPEED MICRO FINE MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 32I-B

ROKU-ROKU MEGA-S500 MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-A5

ROKU-ROKU MEGA-SS400 HIGH-PRECISION HIGH-SPEED MICRO FINE MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B5

ROKU-ROKU MEGA-SS600 MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B5

SODICK HS650L HIGH SPEED MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SODICK LN2X

SUGINO SCH-515FTE SELF-CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 0I-MD

TOSHIBA BTD-130H.R22 TABLE-TYPE HORIZONTAL BORING AND MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS TOSHIBA TOSNUC 999

TOSHIBA UVM-450C HIGH PRECISION VERTICAL MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 30I-MODEL A

TOSHIBA MACHINE

UVM-450C HIGH PRECISION VERTICAL MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 30I-MODEL A

TOSHIBA MACHINE

UVM-450C(V2) HIGH PRECISION VERTICAL MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 30I-B

TOSHIBA MACHINE

UVM-450D HIGH PRECISION VERTICAL MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 30I-B

TOSHIBA UVM-700C HIGH PRECISION VERTICAL MACHINE, MODEL

- 24 -

Brand Name Model Number Product Description MACHINE NO. OF NUMERICAL CONTROL UNIT IS FANUC

30I-B TSUGAMI VMT4-III PRECISION VERTICAL MACHINING CENTER,

MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 32I MODEL B

TWINHORN VF-500 VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI M70

YASDA YBM 640V VER.III

CNC JIG BORER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B5

YASDA YBM 9150V CNC JIG BORER, MODEL NO. OF NUMERICAL CONTROL IS FANUC 31I-B5

YASDA YBM 950V CNC JIG BORER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 16I-MB

YASDA YBM 950V VER.III

CNC JIG BORER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B5

YASDA YMC 430 MICRO CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-A5

YASDA YMC 430 VER.II

MICRO CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B5

BUMOTEC S-191 MILLING MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31-I

DAHLIH DMX-320 VERTICAL MACHINING CENTER WITH TILTING ROTARY TABLE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 0IMD

JECO JC-32 5A CNC VERTICAL MACHINING CENTER WITH DETRON GF-320H TILTING ROTARY TABLE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 0I-MD

QUICK JET AV-70F-63 MILLING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I

SFY HA-5AX2 CNC 5 AXIS MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840D

+GF+ AGIECHARMILLES

MIKRON HPM450U


+GF+ MIKRON UNIVERSAL MILLING MACHINE, MODEL NO. OF

- 25 -

Brand Name Model Number Product Description AGIECHARMILLES HSM600U LP NUMERICAL CONTROL UNIT IS HEIDENHAIN

ITNC530 +GF+ AGIECHARMILLES

MIKRON UCP800 DURO


JOBS LINX 30 HIGH-SPEED 5-AXIS MILLING CENTRE WITH MOBILE CROSSBEAM, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN TNC530 HSCI

KIRA PCV-30 PRODUCTION CENTER WITH NIKKEN CNC180LFA-M & DETLEV HOFMANN HOWIMAT CNC80.2/K/ST ROTARY TABLE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B5

QUASER MF500U/15C 5-AXIS VERTICAL MACHINING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS HEIDENHAIN ITNC530

AM TECHNOLOGY ASG-300F SINGLE SIDE GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI QNU

BAHMUELLER ULTRA TWINNER

GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840D

DANOBAT OVERBECK

IRD-400 GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS SINUMERIK 840D

HUFFMAN HS-155R 5-AXIS SUPERABRASIVE GRINDING SYSTEM, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 15MB

ISOG S20 NUM+ CNC TOOL GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS NUM AXIUM POWEAR P2

NACHI NANO ASPHER ASP01A-Y

ULTRA-PRECISE ASPHERIC GENERATOR, MODEL NO. OF NUMERICAL CONTROL UNIT IS NACHI PNC-XP

POMINI TENOVA HD403-0-7 HEAVY DUTY MOVING WHEEL ROLL GRINDER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS SINUMERIK 840DSL

POMINI TENOVA HD403-3-7 HEAVY DUTY MOVING WHEEL ROLL GRINDER,

- 26 -

Brand Name Model Number Product Description MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS SINUMERIK 840DSL

TOSHIBA MACHINE

LG-100C(B2) PRECISION ASPHERIC MACHINING SYSTEM (TURNING/GRINDING MACHINE), MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31I-B

YEHCHING YC-500CNC CNC GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FAGOR 8035-M-COL-R-2

AMADA GLS-5P CNC OPTICAL PROFILE GRINDER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 32IB

AMADA GLS-80PL CNC OPTICAL PROFILE GRINDER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 32I-B

AMADA GLS-C8 CNC OPTICAL PRECISION PROFILE GRINDER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 32I-B

CNC SPG-W CNC PROFILE GRINDER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 32I-B

ENM G27-60CNC CNC RUBBER ROLLER GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI M70

E-TECH EGP-2550CNC CYLINDRICAL GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 0I-MATE TD

IMT MH 3000 D CNC EXTERNAL CYLINDRICAL GRINDER, MODEL NO. OF NUMERICAL CONTROL UNIT IS SIEMENS 840D

KOYO FG350 FACE SIDE GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 35I-B

KOYO MG21IP INTERNAL GROOVE GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 35I-B

KOYO VG300A GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI Q172DCPU

KOYO VG50 GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI Q173DCPU

- 27 -

Brand Name Model Number Product Description MITSUI MSG-46CNC-B NUMERICAL CONTROL SURFACE GRINDER,

MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 0I-MD

MITSUI MSG-618PC-NCL

CNC SURFACE GRINDER, MODEL NO. OF NUMERICAL CONTROL UNIT IS TECHNO SLM 4000

MITSUI SEIKI J7GAN JIG GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 31IA

MOORE G-48 JIG GRINDER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 15M

NAKAMURA TOME OMT-20NC AUTOMATIC LENS CENTERING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITSUBISHI Q172CPUN

OKAMOTO TWG105P DOUBLE DISK GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 0I-MD

SHIGIYA GAE-30B.50 CNC ANGULAR CYLINDRICAL GRINDER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 0I-TD

STUDER ECOGRINDER CNC UNIVERSAL CYLINDRICAL GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS GE FANUC 0I-TD

WAIDA JG-35CPX GRINDING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 11M MODEL

WAIDA SPG-W CNC PROFILE GRINDER, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 32I-B

INTERMAC MASTER 35 WORK CENTRE, MODEL NO. OF NUMERICAL CONTROL UNIT IS HSD SPA IWNC-BH660 PC BASED

RECOMATIC MM3-PCII 4 AXIS GRINDING CENTER, MODEL NO. OF NUMERICAL CONTROL UNIT IS DELTA TAU TURBO UMAC

WAIDA AP-30 CNC GRINDER MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS FANUC 18I-MB5

NIKKISO WL32-32-200-L WARM LAMINATING ISOSTATIC PRESS SYSTEM NIKKISO WL38-90-200 WARM LAMINATING ISOSTATIC PRESS SYSTEM ACCRETECH XYZAX 3D COORDINATE MEASURING MACHINE

- 28 -

Brand Name Model Number Product Description FUSION NEX 7/5/5

MITUTOYO CRYSTA-APEX EX776T

CNC COORDINATE MEASURING MACHINE

MITUTOYO CRYSTA-APEX S121210





CNC COORDINATE MEASURING MACHINE, MODEL NO. OF NUMERICAL CONTROL UNIT IS MITUTOYO UC400













TOKYO SEIMITSU XYZAX FUSION NEX 12/15/10

3D COORDINATE MEASURING MACHINE

TOKYO SEIMITSU XYZAX FUSION NEX 7/5/5

3D COORDINATE MEASURING MACHINE

BROOKS INSTRUMENT

CMCAT2134AR

COMPACT CAPACITANCE DIAPHRAGM GAUGE

MKS INSTRUMENTS

622B12TBE BARATRON ABSOLUTE CAPACITANCE MANOMETER

MKS INSTRUMENTS

626B01TDE BARATRON CAPACITANCE MANOMETER

MKS INSTRUMENTS


- 29 -

Brand Name Model Number Product Description MKS INSTRUMENTS

626B11TBE BARATRON CAPACITANCE MANOMETER

MKS INSTRUMENTS


MKS INSTRUMENTS

627DU2TBE1B BARATRON TEMPERATURE REGULATED CAPACITANCE MANOMETER

MKS INSTRUMENTS

649A21T21CAVR-HE(10V)

PRESSURE CONTROLLER (SPTS PARTS NO.707383)

MKS INSTRUMENTS

750B11TFA2GA

BARATRON PRESSURE TRANSDUCER

MKS INSTRUMENTS

750B11TFA2GA

BARATRON PRESSURE TRANSDUCER (SPTS PARTS NO.230396)

MKS INSTRUMENTS

750B11TGA2GA

PRESSURE TRANSDUCER (SPTS PARTS NO.237953)

MKS INSTRUMENTS

750C11TGA2GA

BARATRON CAPACITANCE MANOMETER

MKS INSTRUMENTS

750C11TGA2GA

BARATRON PRESSURE TRANSDUCER

MKS INSTRUMENTS

E27D.1TDD5B BARATRON CAPACITANCE MANOMETER

MKS INSTRUMENTS

E28B.1TDF5B PRESSURE TRANSDUCER (SPTS PARTS NO.237964)

MKS INSTRUMENTS

E28B01TDE2B BARATRON PRESSURE TRANSDUCER

MKS INSTRUMENTS

E28B01TDE2B BARATRON PRESSURE TRANSDUCER (SPTS PARTS NO.700753)

MKS INSTRUMENTS

HPS SERIES 325 MODUCELL

TRANSDUCER WITH PIRANI VACUUM SENSOR PCB & RELAY

PFEIFFER VACUUM CCR364 CAPACITANCE TRANSMITTER Category 3 : Electronics PSPL 10000A FAST RESET TIME HIGH AMPLITUDE

PROGRAMMABLE PULSE GENERATOR 400PS RESETIME 2NS-305NS MAX DURATION GREATER THAN 41 VOLT AMPLITUDE 305NS MAX DURATION

AUSTIN ROCKSTAR II ELECTRIC DETONATOR WITH PETN AS

- 30 -

Brand Name Model Number Product Description DETONATOR SECONDARY CHARGE AUSTIN DETONATOR

ROCKSTAR II ELECTRIC DETONATOR WITH RDX AS SECONDARY CHARGE

AGILENT G3281A AGILENT 7700X INDUCTIVELY COUPLED PLASMA MASS SPECTROMETER (ICP-MS) MAINFRAME WITH ACCESSORIES

AGILENT G8403A 7900 ICP-MS AGILENT TECHNOLOGIES

G3281A 7700X ICP-MS

PERKINELMER NEXION 300X ICP-MS

INDUCTIVELY COUPLED PLASMA MASS SPECTROMETER

PERKINELMER NEXION 350X ICP-MS

INDUCTIVELY COUPLED PLASMA MASS SPECTROMETER

AGILENT G1833-65307 MATCHING BOX ASSY AGILENT G1833-65308 PHASE ASSY AGILENT G3663A AGILENT 8800 TRIPLE QUADRUPOLE ICP-MS PERKINELMER NEXION 300D

ICP-MS INDUCTIVELY COUPLED PLASMA MASS SPECTROMETER

THERMO FISHER SCIENTIFIC

ICAP Q ICP-MS

THERMO FISHER SCIENTIFIC

ICAP QC ICP-MS

Munitions List NA NA M10 PISTOL CLEANING BRUSH SET NA NA BREN BUTT END NA NA BREN MAGAZINE LOADER NA NA AK47 MAGAZINES AND POUCH NA NA BREN GUN MOUNT HANDLE CLIPS NA NA DP28 MAGAZINES AND CONTAINER NA NA PPSH41 MAGAZINES AND CANVAS POUCH NA NA BAR MAGAZINES NA NA L2A1 MAGAZINES NA NA M16 MAGAZINES NA NA PKM STOCKS NA NA BREN GUN STOCK (MK III) NA NA WOODEN CARBINE STOCKS AND TOP COVERS

- 31 -

Brand Name Model Number Product Description NA NA BREN GUN MAGAZINES NA NA M13 MAGAZINE NA NA L1A1 MAGAZINES BUSHNELL ET6245FJ ERS 6-24X 50MM LASER DEVICES DBAL-A3 WEAPON SIGHT LASER DEVICES DBAL-PL WEAPON SIGHT LASER DEVICES EOLAD-2VI WEAPON SIGHT LASER DEVICES NA 7 DUAL REMOTE CABLE PRESSURE PADDLE

SWITCH FOR DBAL-A3 WEAPON SIGHT NA NA PKM TRIPOD AND MG42 TRIPOD NA NA KGK TRIPOD NA NA GARAND CLIPS NA NA M16 BIPOD WITH CANVAS POUCH NEWCON OPTIK NVS 27 NIGHT VISION RIFLESCOPE CLIP-ONS STEINER EOPTICS DBAL-A3 DUAL BEAM AIMING LASER ADVANCED3 NA NA GL1 CTS 37MM LAUNCHER NA NA B&T GL-06 LAUNCHER CAL. 40MM WITH

AIMPOINT, LIGHT, GRIP, BIPOD, VEST & CARRYING BAG

NA NA GAUGE SET FOR B&T GL-06 LAUNCHER NA NA DEACTIVATED PANZERFAUST 3 LAUNCHER NA NA ACCESSORY FOR B&T GL-06 LAUNCHER

FOLDABLE STOCK NONLETHAL TECHNOLOGIES

IF38-36 38MM IRONFIST 36 BARREL LAUNCHER SYSTEM

NA NA OPTICAL MORTAR SIGHT NA NA CARTRIDGE 20MM TPT NA NA AMMUNITION NA NA CAL. 45ACP CARTRIDGES NA NA S&W CAL. .32 LONG WC CARTRIDGE NA NA PRIMED CASE FOR 9MM NA NA REMINGTON AMMUNITION .38 SPECIAL

CALIBRE NA NA REMINGTON AMMUNITION 9MM CALIBRE NA NA WINCHESTER AMMUNITIONS 9MM CALIBRE NA NA REMINGTON AMMUNITION .40 S&W CALIBRE

- 32 -

Brand Name Model Number Product Description NA NA CAL. .40S&W CARTRIDGES NA NA PRIMED CASE FOR 5.56MM BALL M193 NA NA WINCHESTER AMMUNITION .38 SPECIAL

CALIBRE NA NA CARTRIDGE CAL. .50 TRACER M17 NA NA PRIMED CASE FOR .380ACP NA NA CCI BLAZER .38 SPECIAL +P 125GR TMJ

AMMUNITION NA NA REMINGTON AMMUNITION .45 AUTO CALIBRE NA NA PROJECTILE 20MM TP NA NA CARTRIDGE 5.56MM BALL M193 NA NA COMPLETE CARTRIDGE CAL. .38SPL LRN OR FMJ NA NA CARTRIDGES CAL. 9MM 124GR FMJ NA NA CAL. 5.6MM CARTRIDGES NA NA PRIMED CASE FOR 20MM AMMUNITION NA NA CAL. 9MM LUGER 124GR FMJ NA NA CAL. .357 MAGNUM 158GR FMJ NA NA CAL. .45 AUTO 230GR FMJ NA NA CARTRIDGE 5.56MM BALL M855 NA NA CAL. 9MM CARTRIDGE NA NA CAL. .38 SPECIAL CARTRIDGE NA NA PRIMED CASE CALIBER .45 ACP NA NA BULLET JACKET CUP FOR CALIBER .45 ACP NA NA CART 7.62MM BALL LINK PACK NA NA CAL. .40 S&W 180GR FMJ (IPSC) NA NA 7.62MM BLANK PRIMED CASE NA NA CARTRIDGE 20MM TP LINKED M14 NA NA PRIMED CASE FOR 9MM 124GR FMJ NA NA PRIMED CASE FOR .38 SPL AUTO SUPER NA NA BULLET FOR 9MM LUGER 124GR FMJ NA NA CAL. .38SPECIAL 132GR FMJ NA NA CAL. .38SUPER 124GR FMJ (IPSC) NA NA CAL. .40S&W 180GR (IPSC) NA NA SPEER LAWMAN 53615 AMMUNITION 9MM

LUGER 115GR TMJ NA NA CART 7.62MM 4BIT LNK M13 PACK

- 33 -

Brand Name Model Number Product Description NA NA PRIMED CARTRIDGE CASE CAL. 5.56MMX45 NA NA PRIMED CARTRIDGE CASE CAL. 7.62MMX51 NA NA BULLET 9G/9MM 124GR FMJ NA NA BULLET .380 AUTO 90GR FMJ NA NA BULLET 38G/.38SPL 132GR FMJ NA NA PMC 25A .25 AUTO 50GR FMJ NA NA PMC 357A .357MAG 158GR JSP NA NA PMC 357B .357MAG 125GR JHP NA NA PMC 38G .38SPL 132GR FMJ NA NA PMC 40D .40S&W 165GR FMJ FP NA NA PMC 40B .40S&W 165GR JHP NA NA PMC 44SB .44S&W SPL 180GR JHP NA NA PMC 44D .44REM MAG 240GR TCSP NA NA PMC 45A .45AUTO 230GR FMJ NA NA PMC 45B .45AUTO 185GR JHP NA NA PMC 9A 9MM LUGER 115GR FMJ NA NA PMC 9B 9MM LUGER 115GR JHP NA NA PMC 9B 9MML USER1 15ERJ HP NA NA NOVOSIBIRSK BULLET OR PROJECTILES NA NA GERMAN AMMO BELT WITH STARTER NA NA STARTER CLIPS (AMMUNITION BELTS) NA NA INERT RUSSIAN MORTAR BOMB NA NA INERT 81MM MORTAR BOMB NA NA 1910 AMMO BOXES AND BELTS NA NA PKM 100 ROUND AMMO BOXES AND BELTS NA NA VICKERS AMMO BELTS NA NA 7.62X25MM PISTOL CARTRIDGE NA NA CARTRIDGES CAL. .38SUPER 124GR FMJ (IPSC) NA NA CARTRIDGES CAL. 9MM LUGER 124GR FMJ NA NA CARTRIDGES CAL. .40S&W 180GR FMJ (IPSC) NA NA CARTRIDGES CAL. .45 AUTO 230G FMJ NA NA BULLET FOR 5.56MM BALL M855 TYPE NA NA CARTRIDGE 12GA ELEY BLUES 24GR 7 1/2 NA NA CARTRIDGE 12GA ELEY BLUES 24GR 9 NA NA CAL 5.56MM BALL M855 TYPE NA NA WINCHESTER AMMUNITIONS .38 SUPER

- 34 -

Brand Name Model Number Product Description CALIBER

NA NA PRIMED CASE FOR CAL .38 NA NA CARTRIDGE CAL 5.56MM BLANK M200 NA NA CAL. 5.56MM BALL M855 TYPE NA NA CASE CARTRIDGE 20MM M103 NA NA BRASS CUP NA NA CARTRIDGE 9MM 115GR FMJ NA NA PROPELLANT CAL. 5.56MM SS109 NA NA PROPELLANT POWDER FOR 7.62 X 51MM NATO NA NA PROPELLANT POWDER FOR 5.56MM L110 NA NA PROPELLANT POWDER FOR 7.62 X 39MM AK NA NA CARTRIDGE CAL. .50 API M8 WITH LINK M9 NA NA CARTRIDGE CAL. .50 INCHES API M8 LINKED NA NA PRIMED CASE FOR CAL. .38 NA NA CAL. .40S&W 180GR FMJ(IPSC) NA NA PROPELLANT DOUBLE BASE FOR PISTOL NA NA GECO AMMUNITION 9MM CALIBRE NA NA GECO AMMUNITION .40 S&W CALIBRE NA NA GECO AMMUNITION .45 AUTO CALIBRE NA NA GECO AMMUNITION .38 SPECIAL CALIBRE NA NA PRIMED CASE FOR .380 ACP NA NA PRIMED CASE FOR .38 SUPER NA NA CAL. .45 ACP 230GR FMJ NA NA CAL. .38 SPECIAL WC 148GR NA NA MAGAZINE FOR SV INFINITY CAL. 9MM PISTOL NA NA CARTRIDGE .32 S&W LONG WAD CUTTER NA NA ARMSCOR AMMUNITION 9MM CALIBRE NA NA ARMSCOR AMMUNITION .40 S&W CALIBRE NA NA ARMSCOR AMMUNITION .45 AUTO CALIBRE NA NA CAL. .40S&W 180GR FMJ (IPSC) NA NA CAL. .38 SPECIAL+P AMMUNITION NA NA GECO AMMUNITION .38 SUPER AUTO CALIBRE NA NA CAL. .38 SPECIAL CARTRIDGE LEAD ROUND

NOSE NA NA CAL. .38 SPECIAL CARTRIDGE LEAD

WADCUTTER

- 35 -

Brand Name Model Number Product Description NA NA CAL. .38SUPER 124GR FMJ(IPSC) NA NA PRIMED CARTRIDGE CASE 5.56MMX45 NA NA PRIMED CARTRIDGE CASE 7.62MMX51 NA NA CARTRIDGE 5.56MM BLANK M200 NA NA CARTRIDGE CAL. 5.56MMX45 BALL WITH STEEL

CORE AND TRACER (4BALLS:1TRACER) LINKED NA NA CARTRIDGE CAL. 7.62MMX51 NATO (BALL M80)

LINKED NA NA RHINO BULLETS 9.3/300 BULLET HEAD & EMPTY

METAL CASES NA NA RHINO BULLETS 9.3/286 BULLET HEAD & EMPTY

METAL CASES NA NA RHINO BULLETS .308/165 BULLET HEAD &

EMPTY METAL CASES NA NA CAL. .38SUPER 125GR FMJ (IPSC) NA NA PRIMED CASE FOR CAL. .50 NA NA CCI BLAZER .38 SPECIAL +P BLAZER

AMMUNITION NA NA PINDAD AMMUNITION MU1-TJ CARTRIDGE

CALIBER 9 X 19MM BALL NA NA WINCHESTER AMMUNITIONS .45 AUTO CALIBRE NA NA 5.56MM X 45MM TRACER M856 NA NA PRIMED CASE FOR 7.62MM BALL NA NA PARABELLUM RESEARCH AMMUNITION

9X19MM 115GR NA NA CARTRIDGE 7.62MM X 51MM TRACER M62 NA NA CTS 3581 37MM SUPER SOCK BEAN BAG

CARTRIDGE NA NA CTS 2581 12GA SUPER SOCK BEAN BAG

CARTRIDGE NA NA CTS 2300 12GA INERT LIQUID BARRICADE

CARTRIDGE NA NA CTS 2570 12GA DOOR BREACHER CARTRIDGE NA NA CTS 2330 12GA CS LIQUID BARRICADE

CARTRIDGE NA NA CAL. .38 SPECIAL 158GR FMJ

- 36 -

Brand Name Model Number Product Description NA NA CAL. .38 SPECIAL WC NA NA WINCHESTER AMMUNITIONS .40 S&W CALIBRE NONLETHAL TECHNOLOGIES

MP-8-RB6 37/38MM RUBBER BALL CARTRIDGE 0.60 CAL. (52 BALLS)

PMC NA CAL. 9MM CARTRIDGE PMC NA CAL. .38SPL CARTRIDGE PMC NA CAL. .38SUPER CARTRIDGE PMC NA CAL. .40S&W CARTRIDGE PMC NA CAL. .45ACP CARTRIDGE PMC NA CAL. 5.56MM CARTRIDGE PMC NA CAL. 7.62MM CARTRIDGE PMC NA CAL. .223/5.56MM CARTRIDGES CENTANEX CTX-1-C-D SINGLE BURST DIVEABLE DISTRACTION

DEVICE CENTANEX CTX-6-OP-D MULTI BURST DIVEABLE DISTRACTION DEVICE CHEMRING N225 RUBBER BURSTING CS GRENADE CHEMRING N227 RUBBER BURSTING CS GRENADE (TRAINING

VERSION CONTAINING A NON-IRRITANT RED SMOKE)

CTS 3211 CARTRIDGE 37/40MM SMOKE LONG RANGE CTS 3215 CARTRIDGE 37/40MM WHITE SMOKE

MULTIPLE(5) CTS 3231 CARTRIDGE 37/40MM CS SMOKE LONG RANGE CTS 3235 CARTRIDGE 37/40MM CS SMOKE MULTIPLE (5) CTS 3400 MUZZLE BLAST CARTRIDGE 37/40MM INERT CTS 3430 MUZZLE BLAST CARTRIDGE 37/40MM CS CTS 3555 CARTRIDGE 37/40MM FOAM BATON CTS 5400 FLAMELESS EXPULSION HAND GRENADE INERT CTS 5430 FLAMELESS EXPULSION HAND GRENADE CS CTS 6210 HAND GRENADE WHITE SMOKE CTS 6230 HAND GRENADE CS LAMPERD LESS LETHAL

L37/38-SL GAS AND SMOKE LAUNCHER 12 LONG SMOOTH BORE

NA NA PROPELLANT CARTRIDGE 20MM M50 SERIES NA NA CTS MINI FLASH BANG TRAINING BODY NA NA CTS 7290MT MINI FLASH BANG TRAINING KIT

- 37 -

Brand Name Model Number Product Description NA NA CTS 7290M MINI FLASH BANG NA NA CHEMRING SABREX 0040 FLEXIBLE LINEAR

CUTTING CHARGE NA NA INERT 60MM RECOILLESS ROCKET NA NA INERT JAPANESE GRENADE NA NA INERT US PINEAPPLE GRENADE NA NA INERT RUSSIAN GRENADES NA NA INERT TYPE 97 GRENADE NA NA INERT BAZOOKA ROCKET NA NA CAL. 40MM CZ805 G1 LAUNCHER NA NA B&T GL-06 SINGLE SHOT LAUNCHER CAL.

40X46MM INCLUDING RED DOT SIGHT AIMPOINT

NA NA B&T GL-06 SINGLE SHOT LAUNCHER GL-06 CAL. 40MM INCL. AIMPOINT, LIGHT, GRIP, BIPOD & WEST

NA NA CTS 6230 HAND GRENADE CS NA NA CTS 5430 FLAMELESS EXPULSION HAND

GRENADE CS NA NA CTS 3430 MUZZLE BLAST CARTRIDGE 37/40MM

CS NA NA CTS 3235 CARTRIDGE 37/40MM CS SMOKE

MULTIPLE (5) NA NA CTS 3231 CARTRIDGE 37/40MM CS SMOKE LONG

RANGE NA NA CTS 3555 CARTRIDGE 37/40MM FOAM BATON NA NA CTS 6210 HAND GRENADE WHITE SMOKE NA NA CTS 5400 FLAMELESS EXPULSION HAND

GRENADE INERT NA NA CTS 3400 MUZZLE BLAST CARTRIDGE 37/40MM

INERT NA NA CTS 3215 CARTRIDGE 37/40MM WHITE SMOKE

MULTIPLE (5) NA NA CTS 3211 CARTRIDGE 37/40MM SMOKE LONG

RANGE NA NA 2.75 ROCKET MOTOR TUBE FOR MK4

- 38 -

Brand Name Model Number Product Description NA NA 2.75 ROCKET NOZZLE & FIN ASSEMBLY FOR MK4 NA NA 2.75 ROCKET NOZZLE & FIN ASSEMBLY FOR

MK40 NA NA 2.75 ROCKET IGNITER MK125 MOD5 NA NA 2.75 ROCKET PROPELLANT GRAIN MK43 MOD1 NA NA 2.75 ROCKET MOTOR TUBE FOR K223 NA NA 2.75 ROCKET LOCK WIRE FOR K223 NA NA 2.75 ROCKET STABILIZING ROD FOR K223 NA NA 2.75 ROCKET NOZZLE & FIN ASSEMBLY FOR

K223 NA NA 2.75 ROCKET PROPELLANT GRAIN K674 NA NA CTS 4330 40MM CS LIQUID BARRICADE SPIN

STABILIZED NA NA CTS 4300 40MM INERT LIQUID BARRICADE SPIN

STABILIZED NA NA CTS 4431 40MM CS POWDER BARRICADE SPIN

STABILIZED NA NA CTS 4401 40MM INERT POWDER BARRICADE

SPIN STABILIZED NA NA CTS 4630 40MM CS MUZZLE BLAST NA NA CTS 4090-1 40MM AERIAL FLASH-BANG 100M

WARNING SIGNAL COLT CANADA EAGLE GRENADE LAUNCHER 40MM NA NA CHEMRING EOD POWER CARTRIDGE RE68PC M3

SHG NA NA CHEMRING EOD POWER CARTRIDGE RE68PC M3

HV NA NA CHEMRING EOD POWER CARTRIDGE RE68PC M3

MV NA NA CHEMRING L5A1 DETONATING CORD 10G/M NA NA CHEMRING L2A2 DEMOLITION DETONATOR

ELECTRIC NA NA RPG OPTICAL SIGHT NA NA RPG 7 ROCKET LAUNCHER SIGHT AND POUCH NA NA CAL. 40MM BGP40 GRENADE LAUNCHER NA NA PANZERFAUST 3 ROCKET LAUNCHER

- 39 -

Brand Name Model Number Product Description PENN ARMS L140-4 40MM SINGLE SHOT LAUNCHER PENN ARMS P540-3 40MM MULTI SHOT LAUNCHER REMOTEC WHEELBARR

OW MK9 EOD REMOTE CONTROLLED VEHICLE

SAMKWANG MACHINERY

D95107-0303-009

FRONT THRU DRIVE AXLE

SAMKWANG MACHINERY

D95107-0303-010

REAR THRU DRIVE AXLE

SAMKWANG MACHINERY

D95107-0303-011

FRONT FINAL DRIVE AXLE

SAMKWANG MACHINERY

D95107-0303-012

REAR FINAL DRIVE AXLE

NONLETHAL TECHNOLOGIES

MP-8M7-CN 38MM CN MULTI SMOKE (7) PROJECTILES

NONLETHAL TECHNOLOGIES

MP-8M7-CS 38MM CS MULTI SMOKE (7) PROJECTILES

MSA 10008906 LENS OUTSERTS FOR MILLENNIUM FACEPIECE MEDIUM/LARGE CLEAR

MSA 10046570 CBRN CANISTER FOR MILLENNIUM GAS MASK MSA 10046570 CANISTER ASSY THREADED CBRN MSA 10051286 MILLENNIUM GAS MASK (SMALL) MSA 10051287 MEDIUM CBRN MILLENNIUM FACEPIECE LESS

CANISTER MSA 10051287 MILLENNIUM GAS MASK (MEDIUM) MSA 10051288 MILLENNIUM GAS MASK (LARGE) NA NA NBC GAS MASK NBC NA GAS MASK PAUL BOYE NA CBRN SUIT AIRBOSS DEFENSE C4 GAS MASK AIRBOSS-DEFENSE 088011C05 CHEMICAL-BIOLOGICAL RESPIRATOR MASK C4 GUANG RAO HONG DA NEW CHEMICAL MATERIALS

NA O-CARBORANE

KATCHEM NA O-CARBORANE SIGMA-ALDRICH 215155 HYDRAZINE ANHYDROUS 98% (Last review date: 27 September 2016)

Some specific examples of products that are ineligible for the

Documents

Transcript of Some specific examples of products that are ineligible for the