SLANT/FIN COMMERCIAL RADIATION

SLANT/FIN COMMERCIAL

RADIATIONTrade Price Book

June 1, 2019

PUBLICATION R-01C Printed in U.S.A. 619

We Build Trust and Comfort.

TABLE OF CONTENTS

Page

350 Series Baseboard . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 HD Series Baseboard . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 LC Series Baseboard . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Fin-Tube Enclosure: Multi/Pak 90 Packaged Slope Top . . . . . . . . . . . . . . .5 Multi/Pak 93 Packaged Flat Top . . . . . . . . . . . . . . . .6 Multi/Pak 95 Packaged Flat Top . . . . . . . . . . . . . . . .7 J Series Slope Top . . . . . . . . . . . . . . . . . . . . . . . . . . .8 R Series Flat Top . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 RAG Series Flat Top with Aluminum Grille . . . . . . . .10 TBG Series Top and Bottom Sloped Grille . . . . . . . .11 FS Series Free Standing . . . . . . . . . . . . . . . . . . . . . .12 EM Series Expanded Metal Element Covers . . . . . . . . .13 F Series Louvered Element Covers . . . . . . . . . . . . . . . . .13 Commercial Fin-Tube . . . . . . . . . . . . . . . . . . . . . . . . . .14 Trough Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Touch-up Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Note: Minimum net order $15.00

Trade price books intended for wholesaler use only.

Ship Ship Stock Enclosure Model Finish Wt./Ft. Order Stock Heating Out- Wt./Ft. Order No. for all heating elements (lbs.) Code Price/Ft. No. Element put† (lbs.) Code Price/Ft.

H-1 3⁄4" copper with 1140 1.3 103-061 $22.14 aluminum fins H-3 3⁄4" copper with 1060 0.9 103-005 13.72 aluminum fins H-4 1" copper with 1060 1.0 103-006 17.44 aluminum fins H-5X 11⁄4" copper with 1100 1.6 103-007 31.79 aluminum fins H-6X 11⁄4" IPS steel with 940 4.6 103-008 31.62 aluminized steel fins

10" high cover, 1-tier 350-10 19 ga., Enam 2.7 108-611 $14.35 350-10D 19 ga.,with damper Enam 3.0 108-635 29.76 350-10 16 ga. Galv 3.4 108-637 17.26 350-10D 16 ga. with damper Galv 3.8 108-638 31.92 14" high cover, 2-tier 350-14 19 ga., Enam 3.4 108-716 $18.27 350-14D 19 ga., damper Enam 3.8 108-717 37.22 350-14 16 ga. Galv 4.1 108-718 29.02 350-14D 16 ga., damper Galv 4.5 108-719 43.05

2

350 SERIES

350 Series Baseboard NU-WHITE ENAMEL (19 ga.) GALVANIZED (16 ga.)

ENCLOSURE ONLY ELEMENTS AVAILABLE

350-10 350-14† BTU/hr/ft at 200° water temp., 4 g.p.m. flow (element installed in 350-10 cover).

Enclosure only. Price includes enclosure and brackets. Pre-cut lengths: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet. 350-10 is 97⁄8" high. 350-14 is 137⁄8" high.

Element only. (No enclosure.) Complete with expansion cradles. Pre-cut lengths: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet.

Packing Shipping Shipping Master Weight Weight SNAP-ON HINGED ACCESSORIES Carton (lbs.) Order Code Price Each (lbs.) Order Code Price Each

End cap, 4" wide (R or L) 1.0 (R) 108-612 $21.52 1.6 (R) 108-753 $40.78 (L) 108-613 (L) 108-754 Slotted end cap, 4" wide (R or L) 1.0 (R) 108-614 22.43 1.6 (R) 108-755 41.88 (L) 108-615 (L) 108-756

Valve cover, 8" wide (R or L) 2.4 (R) 108-616 25.32 2.7 (R) 108-757 50.33 (L) 108-617 (L) 108-758 Slotted valve cover, 8" W, (R or L) 2.4 (R) 108-618 26.79 2.7 (R) 108-759 51.38 (L) 108-619 (L) 108-760

Inside corner, 90° 0.7 108-620 16.19 0.8 108-761 30.11 Inside corner, 135° 0.8 108-621 18.06 0.9 108-762 33.75 Inside corner custom angle — 108-622 43.01 — 108-763 76.08

SNAP-ON ACCESSORIES

End cap, 2" wide (R or L) 0.6 (R) 108-632 12.60 1.0 (R) 108-773 $14.31 (L) 108-633 (L) 108-774 Outside corner, 90° 1.3 108-623 22.93 1.4 108-764 35.76 Outside corner, 135° 1.5 108-624 23.09 1.6 108-765 39.29 Outside corner custom angle — 108-625 86.58 — 108-766 91.21

Splice plate set, 2" wide, 1-piece 0.3 108-626 6.60 0.3 108-767 7.60

Filler sleeve, 7" wide, 3-piece 0.7 108-628 12.37 0.8 108-769 17.87 Filler sleeve, 14" wide, 3-piece 1.3 108-629 16.90 1.5 108-770 23.90

Wall trim, 4" wide, 1-piece 0.3 108-630 8.86 0.5 108-771 12.31 Wall trim, 7" wide, 1-piece 0.7 108-631 9.97 0.8 108-772 14.01

ADDITIONAL ACCESSORIES

Bracket — 108-634 5.88 — 108-775 9.77 Expansion cradles for H-3 — 103-033 1.12 — 103-033 1.12 Expansion cradles for H-1, H-4, H-5X, H-6X — 103-034 1.12 — 103-034 1.12

Decorator Color charges: Color charges are by foot for cover and per piece for accessories. No minimum order size for NuWhite color. Other colors have a 100 foot minimum order requirement or color set up charge of Trade Price $100.00, (Set up part #100-093) Nu-White offered 15% less than decorator colors. For standard decorator colors, request publication DSCG-10.

AS

O

RD

ER

ED

* End caps, valve covers, inside & outside corners, slice plates, filler sleeves & wall trim come in standard Nu-White. Galvanized available on request at same price.

DECORATOR COLORS Standard Metallic** Standard Metallic** Set of front & top panel $5.53 $9.67 $6.54 $10.71 Damper panel 3.10 6.24 3.10 6.24 Accessories (each) 6.16 9.26 7.46 10.61

350-10 350-14

Note: Part numbers for cover shipped in Decorator Colors will be different than part numbers listed above. Non-std (custom) decorator color, consult factory

** Rubbed Bronze is a Metallic Color.

3

HD SERIES

HD Series Baseboard GALVANIZED

Ship Ship Wt./Ft. Order Stock Heating Out- Wt./Ft. Order Stock No. Enclosure Model (lbs.) Code Price/Ft. No. Element put† (lbs.) Code Price/Ft.

HD-850 Cover 16-ga, 1-tier 5.2 108-650 $19.84 H-1 3⁄4" copper with 940 1.3 103-061 $22.14 aluminum fins HD-850D Cover with damper 5.6 108-665 34.35 H-3 3⁄4" copper with 840 0.9 103-005 13.72 16-ga, 1-tier aluminum fins H-4 1" copper with 830 1.0 103-006 17.44 HD-1400 Cover 16-ga, 2-tier 7.0 108-651 34.29 aluminum fins H-5X 11⁄4" copper with 880 1.6 103-007 31.79 HD-1400D Cover with damper 7.4 108-666 48.76 aluminum fins 16-ga, 2-tier H-6X 11⁄4" IPS steel with 750 4.6 103-008 31.62 aluminized steel fins


Enclosure only. Price includes enclosure, brackets and square bit screws. Pre-cut lengths: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet. HD-850 is 81⁄2" high. HD-1400 is 14" high.


Custom Heights

and Configurations Available

† BTU/hr/ft at 200° water temp., 4 g.p.m. flow (element installed in HD-850-1 cover).

Packing Shipping Shipping SNAP-ON ACCESSORIES Per Master Weight Weight 18 ga. only Carton (lbs.) Order Code Price/Ea. (lbs.) Order Code Price/Ea. End cap, 2" wide (R or L) As ordered 1.4 (R) 108-663 (L) 108-664 $ 9.70 1.7 (R) 108-683 (L) 108-684 $21.50 End cap, 4" wide, hinged (R or L) As ordered 1.7 (R) 108-653 (L) 108-654 19.33 2.0 (R) 108-673 (L) 108-674 28.05 End cap, Slotted 4" Hinged (R or L) As ordered 1.7 (R) 108-837 (L) 108-838 21.09 2.0 (R) 107-207 (L) 107-208 28.64

Wall trim, 4" wide As ordered 0.9 (R) 108-667 (L) 108-827 10.76 1.2 (R) 108-672 (L) 108-828 18.54 Valve cover, 10" wide (R or L) As ordered 3.5 (R) 108-655 (L) 108-656 25.80 4.5 (R) 108-675 (L) 108-676 40.15 Valve cover, slotted (R or L) As ordered 3.5 (R) 108-668 (L) 108-669 28.06 4.5 (R) 108-670 (L) 108-671 42.50 Valve cover, center As ordered 3.5 108-697 19.62 4.5 108-698 36.89

Inside corner, 90° As ordered 2.2 108-657 29.53 3.0 108-677 43.69 Inside corner 135˚ As ordered 2.5 108-829 35.43 3.4 108-831 53.13 Outside corner, 90° As ordered 2.7 108-658 70.86 3.5 108-678 94.47 Outside corner 135˚ As ordered 3.1 108-830 70.86 4.0 108-832 94.47 Inside & Outside corner, Custom — — — 108.92 — — 108.92 Filler sleeve, 7" wide As ordered 1.7 108-662 12.90 2.0 108-682 24.27 Splice plate, 2" As ordered 0.5 108-659 6.87 0.8 108-679 13.94 Splice plate, 3" As ordered 0.7 108-660 8.62 — N/A Splice plate, 4" As ordered 0.9 108-661 10.76 — N/A

Expansion cradles for H-3 As ordered 0.1 103-033 1.21 0.1 103-033 1.21

Expansion cradles for H-1, H-4, H-5X, H-6X As ordered 0.1 103-034 1.21 0.1 103-034 1.21

Stainless steel tamper resistant As ordered — 108-699 0.25 — 108-699 0.25 square drive (Robertson) screws Square drive (Robertson) bit As ordered 0.1 108-700 3.22 0.1 108-700 3.22

HD-850* HD-1400*


* HD or LC Series use the same accessories.

DECORATOR COLORS Standard Metallic** Standard Metallic** Set of front & top panel $5.53 $9.67 $6.54 $10.71 Damper panel 3.10 6.24 3.10 6.24 Accessories (each) 6.16 9.26 7.46 10.61

HD-850 HD-1400



4

LC SERIES

LC SERIES Slope-Top Enclosure Galvanized–16 Gauge

ACCESSORIES:

Bracket and element support As ordered 0.4 108-846 $9.87 0.6 108-871 $16.28 (LC 850 = 1 row; LC1400= 2 row) End cap, 2" wide (R or L) As ordered 1.4 (R) 108-663 (L) 108-664 $ 9.70 1.7 (R) 108-683 (L) 108-684 $21.50 End cap, 4" wide, hinged (R or L) As ordered 1.7 (R) 108-653 (L) 108-654 19.33 2.0 (R) 108-673 (L) 108-674 28.50 End cap, Slotted 4" Hinged (R or L) As ordered 1.7 (R) 108-837 (L) 108-838 21.09 2.0 (R) 107-207 (L) 107-208 28.64

Wall trim, 4" wide As ordered 0.9 (R) 108-667 (L) 108-827 10.76 1.2 (R) 108-672 (L) 108-828 18.54 Valve cover, 10" wide (R or L) As ordered 3.5 (R) 108-655 (L) 108-656 25.80 4.5 (R) 108-675 (L) 108-676 40.15 Valve cover, slotted (R or L) As ordered 3.5 (R) 108-668 (L) 108-669 28.06 4.5 (R) 108-670 (L) 108-671 42.50 Valve cover, center As ordered 3.5 108-697 19.62 4.5 108-698 36.89

Inside corner, 90° As ordered 2.2 108-657 29.53 3.0 108-677 43.69 Inside corner 135˚ As ordered 2.5 108-829 35.43 3.4 108-831 53.13 Outside corner, 90° As ordered 2.7 108-658 70.86 3.5 108-678 94.47 Outside corner 135˚ As ordered 3.1 108-830 70.86 4.0 108-832 94.47 Inside & Outside corner, Custom — — — 108.92 — — 108.92 Filler sleeve, 7" wide As ordered 1.7 108-662 12.90 2.0 108-682 24.27 Splice plate, 2" As ordered 0.5 108-659 6.87 0.8 108-679 13.94 Splice plate, 3" As ordered 0.7 108-660 8.62 — N/A Splice plate, 4" As ordered 0.9 108-661 10.76 — N/A

Expansion cradles for H-3 As ordered 0.1 103-033 1.21 0.1 103-033 1.21 Expansion cradles for H-1, H-4, H-5X, H-6X As ordered 0.1 103-034 1.21 0.1 103-034 1.21

LC 850* LC 1400*Shipping Weight

lbs.

Shipping Weight

lbs.

Order Code

Price ea.

Price ea.

Order Code

When ordering: allow 2 brackets per 2, 3, 3.5 and 4 lengths. allow 3 brackets per 5, 6, 7 & 8 foot lengths.

Packaging Per Master

Carton



Stock No.

Enclosure Model

Weight/ Foot Order

CodePrice /Ft.

LC-850 Cover 16-ga, 1-tier 3.4 108-845 $8.72

LC-1400 Cover 16-ga, 2-tier 4.1 108-870 14.64

Cover only. Price includes 16 guage cover only, unpainted galvanized.. Pre-cut lengths: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet. LC-850 is 8-1/2” high. LC-1400 is 14” high.

† BTU/hr/ft at 200° water temp., 4 g.p.m. flow

(element installed in LC-850-1 cover).

Stock No.

Heating Element

Output† Ship Wt./Ft. Price

/Ft. H-1 3⁄4” copper with 940 1.3 103-061 $22.14 aluminum fins H-3 3⁄4” copper with 840 .9 103-005 13.72 aluminum fins H-4 1” copper with 830 1.0 103-006 17.44 aluminum fins H-5X 11⁄4” copper with 880 1.6 103-007 31.79 aluminum fins H-6X 11⁄4” IPS steel with 750 4.6 103-008 31.62 aluminized steel fins

Order Code lbs.

BTUH/ft. lbs.


* HD or LC Series use the same accessories.

DECORATOR COLORS Standard Metallic** Standard Metallic** Front panel $5.53 $9.67 $6.54 $10.71 Accessories (each) 6.16 9.26 7.46 10.61

LC-850 LC-1400



5

90 SERIES

Multi/Pak® 90

Complete 2-Piece Enclosure Package NU-WHITE Pre-painted. Factory packaged.

Slope Top Design Unique 2-piece top-cover/front-cover simplifies handling and installation. Pre-painted Nu-White over galvanized steel, factory packaged, ready to install. Price includes brackets and hangers. Brackets and hangers have galvanized finish. Standard lengths: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet. Single tier, 14" high; two-tier, 21" high, 51⁄4" deep. For ratings see publication FT-10.

Architectural Aluminum Grille

Optional

COMPLETE ENCLOSURE ASSEMBLY*, knocked down. 18-ga. top cover, front cover. Includes wall brackets and SC hangers. 4.0/ft. — †185-100 $22.17/ft. 5.7/ft. †186-100 $34.06ft.

COMPLETE ENCLOSURE ASSEMBLY*, with damper† 5.2/ft. — 185-117 32.92/ft. 6.9/ft. 186-117 44.81/ft.

COMPLETE ENCLOSURE ASSEMBLY WITH ALUMINUM GRILLE*, knocked down. 18-ga. sheet metal. Includes wall brackets and SC hangers. Not available with damper. 5.0/ft. — 185-124 52.68/ft. 6.7/ft. 186-124 64.53/ft.

Field installed damper kit, electro galvanized (not for aluminum grille) 1.2 — §180-007 10.85/ft. 1.2 §180-007 10.85/ft. End cap, telescopic 3" 2.0 12 (R)185-101 26.27 2.7 (R)186-101 30.30 (L)185-102 ((L)186-102 End cap, slotted telescopic 2.0 12 (R)185-103 29.44 2.7 (R)186-103 36.05 (L)185-104 (L)186-104

Splice plate, telescopic 3" 1.0 10 185-105 7.78 1.2 186-105 8.67 Filler sleeve, telescopic 71⁄2" 2.0 4 185-106 14.40 2.7 186-106 16.87 Inside corner, 90° telescopic 3.0 4 185-107 44.70 4.5 186-107 52.62 Inside corner ,135° telescopic 3.0 — 185-122 106.28 4.5 186-122 106.28 Outside corner, 90° telescopic 3.5 4 185-108 43.19 5.7 186-108 50.70 Outside corner,135° telescopic 3.5 — 185-123 106.28 5.7 186-123 106.28 Inside & Outside corner, Custom 108.92 108.92

End valve cover, 10" 4.5 — (R)185-109 49.19 6.2 (R)186-109 55.90 telescopic (requires bracket)‡ (L)185-110 (L)186-110 End valve cover, slotted 10", 4.5 — (R)185-111 52.22 6.2 (R)186-111 61.55 telescopic (requires bracket)‡ (L)185-112 (L)186-112 Center valve cover, 10" 3.2 — 185-113 38.79 4.5 186-113 42.46 telescopic Column cover set 8.7 — 171-119 112.44 14.5 186-119 125.67

Top cover 1.7/ft. — 185-114 7.79/ft. 1.7/ft. 185-114 7.79/ft. Top cover with damper† 2.9/ft. — 185-116 18.63/ft. 2.9/ft. 185-116 18.63/ft. Top cover with alum. grille 2.7/ft. — 185-126 38.59/ft. 2.7/ft. 185-126 38.59/ft. Front cover 1.5/ft. — 185-115 8.86/ft. 2.5/ft. 186-115 12.17/ft. Back panel (electro gal.) 3.0/ft. — §107-028 8.74/ft. 4.0/ft. §107-049 11.22/ft.

Bracket (electro gal.) 1.5 §180-300 18.44 2.0 §180-301 27.34 with SC hangers Bracket (electro gal.) 1.0 §180-303 13.66 1.5 §180-304 17.74 SC hanger (electro gal.) 0.5 §107-220 4.79 0.5 §107-220 4.79 Internal splice plate 107-151 8.93 107-152 9.86

90-14 Single Tier 90-21 Two Tier

Wt. (lbs.)

Wt. (lbs.)Order Code Price Order Code Price

Packing/ Master Carton

* 2' through 5' lengths have 2 wall brackets and 2 unassembled “SC” hangers (4 SC hangers for 90-21).

6' through 8' lengths have 3 wall brackets and 3 unassembled “SC” hangers (6 SC hangers for 90-21).

† All items Nu-White baked enamel except back panels, brackets, dampers and SC hangers which are galvanized.

§ Back panels, brackets and SC hangers are galvanized. DECORATOR COLOR ACCESSORY

EXTRA must be added to these accessories if NU-WHITE or other decorator colors are required.

‡ One bracket required for each end valve cover.

Decorator Color charges: Color charges are by foot for cover and per piece for accessories. No minimum order size for NuWhite color. Other colors have a 100 foot minimum order requirement or color set up charge of Trade Price $100.00, (Set up part #100-093) For standard decorator colors, request publication DSCG-10.

— — — — —

DECORATOR COLORS Standard Metallic** Standard Metallic** Set of front & top panel $6.54 $10.71 $8.98 $13.14 Back panel 7.74 11.91 10.15 14.35 Damper panel 3.10 6.24 3.10 6.24 Accessories (each) 7.46 10.58 8.88 12.01

90-14 90-21



Multi/Pak® 93


6

93 SERIES

Flat-Top Design, 31⁄2” deep. Unique 2-piece top-cover/front-cover simplifies handling and installation. Pre-painted Nu-White over galvanized steel, factory packaged, ready to install. Price includes brackets and hangers. Brackets and hangers have galvanized finish. Standard lengths: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet. Single tier, 93⁄4" high; two-tier, 163⁄4" high, 31⁄2" deep. For ratings see publication FT-10.

COMPLETE ENCLOSURE ASSEMBLY, knocked-down 18 ga. top cover, front cover. Includes wall bracket and hangers*. — 4.0/ft. †171-100 $21.12/ft. 5.7/ft. †172-100 $32.45/ft. COMPLETE ENCLOSURE ASSEMBLY*, with damper† — 5.2/ft. 171-117 31.35/ft. 6.9/ft. 172-117 42.65/ft.

End cap, telescopic 33⁄16" 12 2.0 (R) 171-101 25.00 2.7 (R) 172-101 28.79 (L) 171-102 (L) 172-102 End cap, slotted telescopic 12 2.0 (R) 171-103 28.06 2.7 (R) 172-103 34.37 (L) 171-104 (L) 172-104 Splice plate, telescopic 3" 10 1.0 171-105 7.42 1.2 172-105 8.24 Filler sleeve, telescopic 10" 4 2.0 171-106 13.68 2.7 172-106 16.05 Inside corner, 90°, telescopic 4 3.0 171-107 42.59 4.5 172-107 50.10 Inside corner, 135°, telescopic 4 3.0 171-122 106.28 4.5 172-122 106.28 Outside corner, 90°, telescopic 4 3.5 171-108 41.17 5.7 172-108 48.13 Outside corner, 135°, telescopic 4 3.5 171-123 106.28 5.7 172-123 106.28 Inside & Outside corner, Custom — 108.92 108.92

End valve cover, 10", — 4.5 (R) 171-109 46.84 6.2 (R) 172-109 53.28 telescopic (requires bracket) ‡ (L) 171-110 (L) 172-110 End valve cover, slotted, 10", — 4.5 (R) 171-111 49.68 6.2 (R) 172-111 58.58 telescopic (requires bracket) ‡ (L) 171-112 (L) 172-112

Center valve cover, 10", — 3.2 171-113 36.95 4.5 172-113 40.47 telescopic Column cover set 8.7 — 171-119 112.44 14.5 172-119 125.67

Top cover — 1.7/ft. 171-114 7.46/ft. 1.7/ft. 171-114 7.46/ft. Top cover with damper† — 2.9/ft. 171-116 17.70/ft. 2.9/ft. 171-116 17.70/ft. Front cover — 1.5/ft. 185-115 8.86/ft. 2.5/ft. 186-115 12.17/ft. Back panel (galvanized) — 1.12/ft. 294-031 6.92/ft. 1.92/ft. 294-032 12.44/ft. Hanging strip (electro gal.) 4' Length — 0.2/ft. 294-001 3.13/ft. 0.2/ft. 294-001 3.13/ft.

93 bracket (galvanized) with element support bracket 1.5 §170-001 18.44 2.0 §170-002 27.34 93 ES element support bracket 0.5 §293-002 4.79 0.5 §293-002 4.79 Bracket (galvanized) 1.0 §293-195 13.66 1.5 §293-196 17.74

* 2' through 5' lengths have 2 wall brackets and 2 element support brackets (4 element supports for 93-17). 6' through 8' lengths have 3 wall brackets and 3 element support brackets (6 element supports for 93-17). † All items Nu-White baked enamel except brackets, dampers, ES and element supports which are galvanized. § Brackets, ES and element supports are galvanized. DECORATOR COLOR ACCESSORY EXTRA must be

added to this accessory if NU-WHITE or other decorator colors are required. ‡ One bracket required for each end valve cover.


Wt. (lbs.)

Wt. (lbs.)

Order Code

Order CodePrice Price



— — — —


93-10 93-17



7

95 SERIES

Multi/Pak® 95


Flat-Top Design, 51⁄4” deep. Unique 2-piece top-cover/front-cover simplifies handling and installation. Pre-painted Nu-White over galvanized steel, factory packaged, ready to install. Price includes brackets and hangers. Brackets and hangers have galvanized finish. Standard lengths: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet. Single tier, 93⁄4" high; two-tier, 163⁄4" high, 51⁄4" deep. For ratings see publication FT-10.

* 2' through 5' lengths have 2 wall brackets and 2 unassembled “SC” hangers (4 SC hangers for 95-17). 6' through 8' lengths have 3 wall brackets and 3

unassembled “SC” hangers (6 SC hangers for 95-17).

† All items Nu-White baked enamel except brackets, dampers, SC hangers and element supports which are galvanized.

∆ 3-1/2' length not available with aluminum grille. § Brackets, SC hangers and element supports are galvanized. DECORATOR

COLOR ACCESSORY EXTRA must be added to this accessory if NU-WHITE or other decorator colors are required.

‡ One bracket required for each end valve cover.

COMPLETE ENCLOSURE ASSEMBLY, knocked-down. 18 ga. top cover, front cover. Includes wall bracket and hangers*. — 4.0/ft. 174-100 $22.17/ft. 5.7/ft. 175-100 $34.06/ft. COMPLETE ENCLOSURE ASSEMBLY*, with damper† — 5.2/ft. 174-117 32.92/ft. 6.9/ft. 175-117 44.81/ft. COMPLETE ENCLOSURE ASSEMBLY WITH ALUMINUM GRILLE*, knocked-down. 18 ga. sheet metal. Includes wall bracket and SC hangers*. Not available with damper. ∆ — 5.0/ft. 174-124 $52.68/ft. 6.7/ft. 175-124 64.53/ft.

End cap, telescopic 33⁄16" 12 2.0 (R) 174-101 26.27 2.7 (R) 175-101 30.30 (L) 174-102 (L) 175-102 End cap, slotted telescopic 12 2.0 (R) 174-103 29.44 2.7 (R) 175-103 36.05 (L) 174-104 (L) 175-104

Splice plate, telescopic 3" 10 1.0 174-105 7.78 1.2 175-105 8.67 Filler sleeve, telescopic 10" 4 2.0 174-106 14.40 2.7 175-106 16.87 Inside corner, 90°, telescopic 4 3.0 174-107 44.70 4.5 175-107 52.62 Inside corner, 135°, telescopic 4 3.0 174-122 106.28 4.5 175-122 106.28 Outside corner, 90°, telescopic 4 3.5 174-108 43.19 5.7 175-108 50.56 Outside corner, 135°, telescopic 4 3.5 174-123 106.28 5.7 175-123 106.30 Inside & Outside corner, Custom 108.92 108.92 End valve cover, 10", telescopic (requires bracket) ‡ — 4.5 (R) 174-109 49.19 6.2 (R) 175-109 55.90 (L) 174-110 (L) 175-110 End valve cover, slotted, 10", telescopic — 4.5 (R) 174-111 52.22 6.2 (R) 175-111 61.55 (requires bracket) ‡ (L) 174-112 (L) 175-112 Center valve cover, 10", telescopic — 3.2 174-113 38.79 4.5 175-113 42.46 Column cover set 8.7 — 174-119 112.44 14.5 175-119 125.67

Top cover — 1.7/ft. 174-114 7.79/ft. 1.7/ft. 174-114 7.79/ft. Top cover with damper† — 2.9/ft. 174-116 18.63/ft. 2.9/ft. 174-116 18.63/ft. Top cover with alum. grille — 2.7/ft. 174-126 38.59/ft. 2.7/ft. 174-126 38.59/ft. Front cover — 1.5/ft. 185-115 8.86/ft. 2.5/ft. 186-115 12.17/ft. Back panel (galvanized) — 1.12/ft. 294-031 6.92/ft. 1.92/ft. 294-032 12.17/ft. Hanging strip (galvanized) Sold in 4' Length — 0.2/ft. 294-001 3.13/ft. 0.2/ft. 294-001 3.13/ft.

95 bracket (galvanized) with SC hanger: for stamped grille 1.5 §170-004 18.44 2.0 §170-005 27.34 for aluminum grille 1.5 §170-014 18.44 2.0 §170-015 27.34 Bracket (galvanized): for stamped grille 1.0 §295-195 13.66 1.5 §295-196 17.74 or aluminum grille 1.0 §170-024 13.66 1.5 §170-025 17.74 SC hanger (galvanized) 0.5 §107-220 4.79 0.5 §107-220 4.79


Wt. (lbs.)

Wt. (lbs.)

Order Code

Order CodePrice Price


Architectural Aluminum Grille

Optional


— — — — —


95-10 95-17



8

J SERIES

J Series Slope-Top Enclosures GALVANIZED

For ratings see publication FT-10. † Column cover set counts as two accessories for decorator color extra. § 200 ft. or more (consult factory for less than 200 ft.) ∆ 3-1/2' length not available with aluminum grille. ‡ One bracket required for each end valve cover.

Standard lengths: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet.

Front cover/ft. (18 ga.) 2.5 107-001 $14.67/ft. 3.0 107-022 $16.53/ft. 4.0 107-043 $20.06/ft. 5.0 107-064 $23.62/ft. Front cover/ft. (16 ga.) 3.0 107-002 16.41/ft. 4.0 107-023 18.74/ft. 5.0 107-044 23.54/ft. 6.2 107-065 28.34/ft. Front cover/ft. (14 ga.) § 4.0 107-071 32.69ft. 4.7 107-024 42.82/ft. 6.5 107-045 51.29/ft. 8.0 107-066 59.89

Front cover with alum. grille (18 ga.) ∆ 3.5 107-036 45.17/ft. 4.0 107-126 46.98/ft. 5.0 107-129 50.51/ft. 6.0 107-134 73.60/ft.Front cover with alum. grille (16 ga.) ∆ 4.0 107-035 46.88/ft. 5.0 107-127 49.21/ft. 6.0 107-130 53.99/ft. 7.2 107-135 75.51/ft. Front cover with alum. grille (14 ga.)§ ∆ 5.0 107-125 63.13/ft. 5.7 107-128 73.29/ft. 7.5 107-131 81.75/ft. 9.0 107-136 90.34/ft. Damper not available w/alum grille

Front cover/ft. (18 ga.) w/damper 3.7 107-003 24.48/ft. 4.2 107-025 27.22/ft. 5.2 107-046 30.94/ft. 6.2 107-067 53.86/ft. Front cover/ft. (16 ga.) w/damper 4.2 107-004 26.31/ft. 5.2 107-026 29.56/ft. 6.2 107-047 34.33/ft. 7.5 107-068 55.79/ft. Front cover/ft. (14 ga.) w/damper § 5.2 107-005 43.43/ft. 6.0 107-027 53.61/ft. 7.7 107-048 62.03/ft. 9.2 107-069 70.61/ft.

Field installed damper kit, galvanized 1.2 180-007 10.85/ft. 1.2 180-007 10.85/ft. 1.2 180-007 10.85/ft. 1.2 180-007 10.85/ft. Back panel/ft. (BP) (20 ga.) 2.2 107-006 6.27/ft. 3.0 107-028 8.74/ft. 4.0 107-049 11.22/ft. 5.2 107-070 13.81/ft. Bottom inlet grille/ft. 1.2 108-010 10.05/ft. 1.2 108-010 10.05/ft. 1.2 108-010 10.05ft. 1.2 108-010 10.05/ft. Bracket with SC hanger(s) 1.7 107-008 12.29 1.7 107-029 18.44 2.7 107-050 27.32 4.2 107-072 36.09

Bracket only 1.0 107-009 7.50 1.0 107-030 13.66 1.5 107-051 17.74 2.0 107-073 26.00 Inverted bracket with SC hanger(s) 1.7 107-010 20.80 1.7 107-031 21.70 2.7 107-052 31.45 4.2 107-074 40.50 Inverted bracket only 1.0 107-011 16.02 1.0 107-032 16.89 1.5 107-053 21.82 2.0 107-075 26.05

End cap, telescopic 1.7 (R)107-090 20.35 2.0 (R)107-099 23.91 2.7 (R)107-107 27.51 3.7 (R)107-158 30.57 (L)107-091 (L)107-100 (L)107-108 (L)107-156 End cap, slotted, telescopic 1.7 (R)107-092 24.48 2.0 (R)107-101 26.81 2.7 (R)107-109 32.77 3.7 (R)107-117 35.88 (L)107-093 (L)107-102 (L)107-110 (L)107-118 End valve cover, telescopic, 3.5 (R)107-094 38.89 4.5 (R)107-103 44.70 6.2 (R)107-111 50.85 8.0 (R)107-119 57.96 10" JA, 12" JL (requires bracket) ‡ (L)107-095 (L)107-104 (L)107-112 (L)107-120 End valve cover, slotted, telescopic, 3.5 (R)107-096 40.32 4.5 (R)107-105 47.44 6.2 (R)107-113 55.90 8.0 (R)107-121 63.74 10" JA, 12" JL (requires bracket) ‡ (L)107-097 (L)107-106 (L)107-114 (L)107-122

Center valve cover, telescopic, 2.7 107-016 29.26 3.2 107-037 35.25 4.5 107-058 38.58 5.0 107-080 47.23 10" JA, 12" JL Filler sleeve, telescopic – 71⁄2" 1.7 107-017 9.24 2.0 107-038 13.09 2.7 107-059 15.32 3.7 107-081 17.76 Internal splice plate (Required to N/A 107-151 8.93 107-152 9.86 107-153 11.26 join 2-covers) Splice plate, telescopic – 3" 0.7 107-018 6.50 1.0 107-039 7.10 1.2 107-060 7.82 1.5 107-082 8.69

Inside corner, 90° telescopic 2.2 107-019 31.92 3.0 107-040 40.64 4.5 107-061 47.76 6.7 107-083 54.15 Inside corner, 135° telescopic 2.2 107-033 106.28 3.0 107-054 106.28 4.5 107-056 106.28 — Inside corner, custom, telescopic 2.2 107-138 108.92 3.0 107-140 108.92 4.5 107-142 108.92 6.7 107-144 108.92 Outside corner, 90° telescopic 2.7 107-020 33.13 3.5 107-041 39.19 5.7 107-062 45.95 8.0 107-084 50.44 Outside corner, 135° telescopic 2.7 107-034 106.28 3.5 107-055 106.28 5.7 107-057 106.28 — Outside corner, custom, telescopic 2.7 107-139 108.92 3.5 107-141 108.92 5.7 107-143 108.92 8.0 107-145 108.92

Column cover set 8.7 107-021 101.98 8.7 107-021 101.98 14.5 107-063 115.75 20.7 107-085 136.70 SC hanger (galvanized) 0.5 107-220 4.79 0.5 107-220 4.79 0.5 107-220 4.69 0.5 107-220 4.79 Access door, field installed 0.9 108-529 18.81 0.9 108-529 18.81 0.9 108-529 18.81 0.9 108-529 18.81

Wt. Order lbs. Code Price




JL-10 JA-14 JA-21 JA-28


Custom Heights


DECORATOR COLORS Standard Metallic** Standard Metallic** Standard Metallic** Standard Metallic** Front cover $5.53 $9.69 $6.54 $10.71 $8.98 $13.16 $11.90 $16.07 Back panel 6.53 10.71 7.74 11.91 10.15 14.30 14.15 18.15 Damper panel 3.10 6.24 3.10 6.24 3.10 6.24 3.10 6.24 Accessories (each) 6.16 9.28 7.46 10.61 8.88 12.01 10.69 13.83

JL-10 JA-14 JA-21 JA-28



9

R SERIES

R Series Flat-Top Enclosures GALVANIZED

Standard lengths: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet. Other 1⁄2' lengths - contact factory.

Front cover/ft. (18 ga.) 2.5 108-001 $15.84ft. 3.5 108-020 $17.22/ft. 4.2 108-200 $23.28ft. 5.0 108-076 $28.46/ft. Front cover/ft. (16 ga.) 3.1 108-002 17.78/ft. 4.4 108-021 20.19/ft. 5.3 108-201 26.98/ft. 6.3 108-077 32.69/ft. Front cover/ft. (14 ga.)§ 4.0 108-003 29.15ft. 5.5 108-022 31.56/ft. 6.7 108-202 38.32/ft. 7.7 108-078 44.05/ft.

Damper with operator 3.2 108-209 11.59/ft. 2.3 108-207 11.59/ft. 2.3 108-207 11.59/ft. 2.3 108-207 11.59/ft. Back panel/ft. 2.2 107-006 6.27ft. 3.0 107-028 8.74/ft. 4.0 107-049 11.22/ft. 5.2 107-070 13.81/ft. Bottom inlet grille/ft. 1.2 108-010 10.05/ft. 1.2 108-010 10.05/ft. 1.2 108-010 10.05/ft. 1.2 108-010 10.05/ft.

Wt. Order Price lbs. Code




RL-10 RT-14 RT-21 RT-28

* For recommended number of brackets and hangers for a given length, see publication FT-10. § 200 ft. or more (consult factory for less than 200 ft.). Standard accessories are all telescopic.

Models RF (Louvered Front). Call factory for order code and prices (Not Available for RL-10)

Custom Heights


Bracket with SC hanger 2.7 108-008 17.67 4.7 108-027 18.44 5.4 108-046 26.42 6.6 108-083 38.01 Bracket only* 2.2 108-009 12.88 4.2 108-028 13.66 4.9 108-047 16.84 6.1 108-084 23.62 SC hangers* 0.5 107-220 4.79 0.5 107-220 4.79 0.5 107-220 4.79 0.5 107-220 4.79

End cap, 3", telescopic (R) 2.0 108-220 15.46 2.3 108-228 16.78 3.0 108-236 19.49 3.7 108-244 21.31 (L) 2.0 108-221 15.46 2.3 108-229 16.78 3.0 108-237 19.49 3.7 108-245 21.31 End cap (slotted), 3", telescopic (R) 2.0 108-222 16.17 2.3 108-230 17.42 3.0 108-238 19.78 3.7 108-246 21.98 (L) 2.0 108-223 16.17 2.3 108-231 17.42 3.0 108-239 19.78 3.7 108-247 21.98

End valve cover-10" telescopic- (R) 3.6 108-224 39.90 4.6 108-232 44.44 6.3 108-240 50.42 8.0 108-248 59.45 with access door (requires bracket) (L) 3.6 108-225 39.90 4.6 108-233 44.44 6.3 108-241 50.42 8.0 108-249 59.45 End valve cover (slotted) 10" (R) 3.6 108-226 40.64 4.6 108-234 45.12 6.3 108-242 51.07 8.0 108-250 60.59 telescopic-w/access door (req. bracket) (L) 3.6 108-227 40.64 4.6 108-235 45.12 6.3 108-243 51.07 8.0 108-251 60.59

Center valve cover 10", telescopic with access door 2.8 108-014 23.72 3.3 108-033 26.32 4.6 108-052 28.44 5.9 108-089 33.13 Filler sleeve 7", telescopic 2.0 108-015 7.85 2.3 108-034 8.38 3.0 108-053 9.39 3.9 108-090 10.98 Splice plate 3", telescopic 0.9 108-016 5.54 1.2 108-035 5.84 1.3 108-054 7.20 1.5 108-091 8.74

Inside corner, 90°, telescopic 2.9 108-017 34.05 3.2 108-036 37.08 4.7 108-055 39.08 6.2 108-092 48.77 Inside corner, custom, telescopic 2.9 108-355 106.28 3.2 108-357 106.28 4.7 108-359 106.28 6.2 108-361 112.44 Outside corner, 90°, telescopic 3.1 108-018 33.88 3.4 108-037 37.08 4.9 108-056 39.08 6.4 108-093 48.77 Outside corner, custom, telescopic 3.1 108-356 106.28 3.4 108-358 106.28 4.9 108-360 106.28 6.4 108-362 112.44 Access door, field installed 0.9 108-529 18.81 0.9 108-529 18.81 0.9 108-529 18.81 0.9 108-529 18.81

RL-10 RT-14 RT-21 RT-28

BRACKETS, HANGERS AND ACCESSORIES FOR RL, RT AND RR COVER


RL-10 RT-14 RT-21 RT-28




10

RAG SERIES

RAG Series Flat-Top Enclosures GALVANIZED WITH ARCHITECTURAL ALUMINUM GRILLE


Front cover with alum. grille (18 ga.) 3.5 108-085 46.34/ft. 4.5 108-387 46.62/ft. 5.2 108-393 53.77/ft. 6.0 108-443 58.93/ft. Front cover with alum. grille (16 ga.) 4.1 108-086 48.28/ft. 5.4 108-388 50.68/ft. 6.3 108-394 57.44/ft. 7.3 108-444 63.13/ft. Front cover with alum. grille (14 ga.)§ 5.0 108-087 59.60/ft. 6.5 108-389 62.02/ft. 7.7 108-395 68.79/ft. 8.7 108-445 74.48/ft. Damper not available w/alum grille

Back panel/ft. 2.2 107-006 6.27/ft. 3.0 107-028 8.74/ft. 4.0 107-049 11.22/ft. 5.2 107-070 13.81/ft. Bottom inlet grille/ft. 1.2 108-010 10.05/ft. 1.2 108-010 10.05/ft. 1.2 108-010 10.05/ft. 1.2 108-010 10.05/ft.

Bracket with SC hanger: for aluminum grille 2.7 108-689 12.30 4.7 108-691 18.44 5.4 108-693 27.34 6.6 108-695 36.15 Bracket only*: for aluminum grille 2.2 108-690 7.50 4.2 108-692 13.66 4.9 108-694 17.74 6.1 108-696 21.70 SC hangers* 0.5 107-220 4.79 0.5 107-220 4.79 0.5 107-220 4.79 0.5 107-220 4.79

End cap, 3", telescopic (R) 2.0 108-931 11.15 2.3 108-946 11.96 3.0 108-965 13.74 3.7 108-980 15.30 (L) 2.0 108-932 11.15 2.3 108-947 11.96 3.0 108-966 13.74 3.7 108-981 15.30 End cap (slotted), 3", telescopic (R) 2.0 108-933 11.89 2.3 108-948 12.71 3.0 108-967 14.49 3.7 108-982 16.02 (L) 2.0 108-934 11.89 2.3 108-949 12.71 3.0 108-968 14.49 3.7 108-983 16.02

End valve cover-10" telescopic- (R) 3.6 108-935 39.90 4.6 108-950 44.44 6.3 108-969 59.45 8.0 108-991 59.45 with access door. (requires bracket)† (L) 3.6 108-936 39.90 4.6 108-951 44.44 6.3 108-970 59.45 8.0 108-992 59.45 End valve cover (slotted) 10" (R) 3.6 108-937 40.64 4.6 108-952 45.12 6.3 108-971 60.28 8.0 108-993 60.28 telescopic-w/access door (req. bracket) † (L) 3.6 108-938 40.64 4.6 108-953 45.12 6.3 108-972 60.28 8.0 108-994 60.28

Center valve cover 10", telescopic with access door 2.8 108-939 23.72 3.3 108-954 26.32 4.6 108-973 28.44 5.9 108-995 33.13 Filler sleeve 7", telescopic 2.0 108-940 4.24 2.3 108-955 4.72 3.0 108-974 5.90 3.9 108-741 7.03 Splice plate 3", telescopic 0.9 108-941 2.59 1.2 108-956 2.83 1.3 108-975 3.29 1.5 108-742 3.90

Inside corner, 90°, telescopic 2.9 108-942 33.88 3.2 108-957 37.08 4.7 108-976 39.08 6.2 108-743 48.77 Inside corner, custom, telescopic 2.9 108-943 105.56 3.2 108-958 106.28 4.7 108-977 106.28 6.2 108-744 112.44 Outside corner, 90°, telescopic 3.1 108-944 33.88 3.4 108-963 37.08 4.9 108-978 39.08 6.4 108-745 48.77 Outside corner, custom, telescopic 3.1 108-945 106.28 3.4 108-964 106.28 4.9 108-979 106.28 6.4 108-746 112.44 Access door, field installed 0.9 108-529 18.81 0.9 108-529 18.81 0.9 108-529 18.81 0.9 108-529 18.81





RAG-10 RAG-14 RAG-21 RAG-28

* For recommended number of brackets and hangers for a given length, see publication FT-10. † One bracket required for each end valve cover. § 200 ft. or more (consult factory for less than 200 ft.). Standard accessories are all telescopic.

Custom Heights



RAG-10 RAG-14 RAG-21 RAG-28




11

TBG SERIES


Front cover/ft. (16 ga.) 5.6 108-425 30.06/ft. 8.4 108-474 38.57/ft. Front cover/ft. (14 ga.)§ 7.0 108-399 44.21/ft. 10.5 108-400 52.05/ft.

Front cover with 1 aluminum grille(18 ga.)‡∆ 5.5 108-489 55.60/ft. 7.6 108-493 64.12/ft. Front cover with 1 aluminum grille(16 ga.)‡∆ 6.6 108-490 60.51/ft. 9.4 108-494 69.01/ft. Front cover with 1 aluminum grille(14 ga.)‡ §∆ 8.0 108-449 74.69/ft. 11.5 108-497 82.50/ft. Damper not available w/aluminum grille

Damper with operatorº 1.2 108-440 11.11/ft. 1.2 108-440 11.11/ft. Back panel/ft. 2.1 108-422 9.62/ft. 2.8 108-471 12.52/ft. Bracket only * 1.2 108-402 9.41 2.8 108-451 11.74 SC hangers * 0.5 107-220 4.79 0.5 107-220 4.79

End cap, 3", telescopic 2.6 108-403 23.62 3.6 108-452 24.92 End cap (slotted) 3", telescopic (R) 2.5 108-405 24.21 3.5 108-454 26.22 End cap (slotted) 3", telescopic (L) 2.5 108-406 24.21 3.5 108-455 26.22

End valve cover-10", telescopic- (R) 6.0 108-407 38.75 8.3 108-456 47.01 with access door. (requires bracket) † (L) 6.0 108-408 38.75 8.3 108-457 47.01 End valve cover (slotted) 10", (R) 5.9 108-409 39.46 8.2 108-458 48.14 telescopic-w/access door. (req. bracket) † (L) 5.9 108-410 39.46 8.2 108-459 48.14 Center valve cover-10", telescopic- with access door 4.3 108-411 28.22 6.0 108-460 36.40

Filler sleeve, 7", telescopic 2.6 108-412 10.05 3.6 108-461 10.98 Splice plate, 3", telescopic 1.6 108-413 7.45 1.8 108-462 11.70 Inside corner, 90°, telescopic 4.5 108-414 41.63 6.0 108-463 44.51 Inside corner, custom, telescopic 4.5 108-415 106.28 6.0 108-464 106.28 Outside corner, 90°, telescopic 4.5 108-416 41.63 7.6 108-465 44.51 Outside corner, custom, telescopic 4.5 108-417 106.28 7.6 108-466 106.28 Acess door, field installed 0.9 108-529 18.81 0.9 108-529 18.81



TBG-17 TBG-24

* For recommended number of brackets and hangers for a given length, see publication FT-10. † One bracket required for each end valve cover. ‡ For additional second architectural aluminum grille, add $15.75/ft. ∆ 3-1/2' length not available with aluminum grille. § 200 ft. or more (consult factory for less than 200 ft.). Front cover filler panel available upon request. Standard accessories are all telescopic.

Custom Heights



TBG Series Slope Top/Bottom Enclosures GALVANIZED ARCHITECTURAL ALUMINUM GRILLE OPTIONAL

DECORATOR COLORS Standard Metallic** Standard Metallic** Front panel $8.98 $13.16 $14.15 $18.30 Back panel 10.15 14.30 11.90 16.07 Damper panel 3.10 6.24 3.10 6.24 Accessories (each) 8.88 12.01 10.69 13.83

TBG-17 TBG-24



12

FS SERIES

FS Free Standing Enclosures GALVANIZED ARCHITECTURAL ALUMINUM GRILLE OPTIONAL


Cover only/ft. (16 ga.) 3.8 108-513 35.89/ft. 6.9 108-548 41.88/ft. 9.9 108-588 50.14/ft. Cover only/ft. (14 ga.)§ 4.7 108-498 56.78/ft. 8.5 108-499 61.97/ft. 12.2 108-500 70.61/ft.

Cover only/ft., aluminum grille (16 ga.)∆ 4.8 108-564 66.38/ft. 7.9 108-568 72.35/ft. 10.9 108-606 80.62/ft. Cover only/ft., aluminum grille (14 ga.)§∆ 5.7 108-640 87.29/ft. 9.5 108-641 92.47/ft. 13.2 108-642 101.07/ft.

Pedestal assembly only *† 4.0 108-502 49.60 5.0 108-532 59.04 6.0 108-572 61.88 SC Hangers* 0.5 107-220 4.79 0.5 107-220 4.79 0.5 107-220 4.79 Stainless steel escutcheon only 0.2 108-530 12.48 0.2 108-530 12.48 0.2 108-530 12.48

End cap, 3", telescopic 1.2 108-503 11.74 1.8 108-533 18.78 2.2 108-573 23.26 End cap (slotted), 3", telescopic 1.2 108-505 12.48 1.8 108-535 19.49 2.2 108-575 24.21

End valve cover (R) 2.8 108-158 39.45 4.1 108-537 44.16 5.1 108-577 49.60 (L) 2.8 108-160 39.45 4.1 108-538 44.16 5.1 108-578 49.60 End valve cover, slotted (R) 2.8 108-198 40.15 4.1 108-539 44.51 5.1 108-579 50.32 (L) 2.8 108-199 40.15 4.1 108-540 44.51 5.1 108-580 50.32 Center valve cover 2.0 108-609 26.33 3.0 108-541 30.88 3.7 108-581 36.49

Filler sleeve, 7", telescopic 1.4 108-507 10.60 2.4 108-542 14.64 3.4 108-582 18.54 Splice plate, 3", telescopic 0.6 108-508 5.90 1.0 108-543 9.20 1.5 108-583 13.35 Inside corner, 90°, telescopic 2.2 108-509 33.78 3.8 108-544 38.50 5.4 108-584 42.87 Inside corner, custom, telescopic 2.2 108-510 106.28 3.8 108-545 106.28 5.4 108-585 106.28

Outside corner, 90°, telescopic 2.2 108-511 33.78 3.8 108-546 38.50 5.4 108-586 42.87 Outside corner, custom, telescopic 2.2 108-512 106.28 3.8 108-547 106.28 5.4 108-587 106.28 Access door-field installed 0.9 108-529 18.81 0.9 108-529 18.81 0.9 108-529 18.81




FS-7 FS-14 FS-21

Standard accessories are all telescopic. * For recommended number of brackets and hangers for a given length, see publication FT-10. † Assembly includes stainless steel escutcheon but not the SC Hanger(s). ∆ 3-1/2' length not available with aluminum grille. § 200 ft. or more (consult factory for less than 200 ft.).

DECORATOR COLORS Standard Metallic** Standard Metallic** Standard Metallic** Cover $6.54 $10.71 $8.98 $13.16 $14.75 $18.93 Accessories 6.44 9.57 8.87 12.01 10.69 13.81

FS-7 FS-14 FS-21




EM/F SERIES

EM Expanded Metal and F Louvered Element Covers GALVANIZED


EM cover/ft. (16 ga.) 0.5 108-122 13.77/ft. 1.0 108-132 17.22/ft. 1.3 108-141 $20.08/ft. F cover/ft. (18 ga.)† 1.7 108-120 15.74/ft. 3.0 108-130 19.05/ft. 4.2 108-139 22.37/ft.

Bracket only* M1: 0.8 108-173 7.20 M2: 1.0 108-177 8.33 M3: 1.2 108-179 9.34 SC hangers* 0.5 107-220 4.79 0.5 107-220 4.79

End cap 3" telescopic (R) 1.0 108-252 15.46 1.3 108-254 16.84 1.6 108-258 19.07 (L) 1.0 108-253 15.46 1.3 108-255 16.84 1.6 108-259 19.07 End cap (slotted) 3", telescopic (R) 1.0 108-124 16.17 1.3 108-256 17.42 1.6 108-260 19.78 (L) 1.0 108-125 16.17 1.3 108-257 17.42 1.6 108-261 19.78

Filler sleeve 7", telescopic 1.2 108-126 7.85 1.9 108-135 8.38 2.6 108-144 9.34 Splice plate 3", telescopic 0.5 108-127 5.54 0.8 108-136 5.84 1.1 108-145 7.20 Inside corner, 90°, telescopic 1.3 108-128 33.01 2.1 108-137 36.49 2.9 108-146 39.08 Outside corner, 90°, telescopic 1.5 108-129 33.01 2.3 108-138 36.49 3.1 108-147 39.08




EM/F-5 One-Tier

EM/F-12 Two-Tier

EM/F-19 Three-Tier

* For recommended number of brackets and hangers for a given length, see publication FT-10. † Available in 16 ga., call factory for price. Standard accessories are all telescopic.

Custom Heights


13

DECORATOR COLORS Standard Metallic** Standard Metallic** Standard Metallic** Front cover $5.53 $9.67 $6.54 $10.71 $8.98 $13.14 Accessories 6.16 9.28 7.45 10.61 8.88 12.01

EM-5/F-5 EM-12/F-12 EM-19/F-19




FIN- TUBE Commercial Fin-Tube

Element Type

S-532

S-540

S-832

C-340*

C-440

C-540

H-1

H-3

H-4

H-5X

H-6X

HANGERS AND ACCESSORIES Shipping Wt. (lbs.) Order Code Price Each

SC Hanger Supports finned element or bare tubing, permits .50 107-220 $4.79 15⁄16" expansion movement PC Hanger Supports bare or finned tubing PC-2—2" tube .50 108-172 8.40 Sems bolt 1⁄4-20 x 3⁄8 — 005-027 .19 M-1 Hanger Expansion hanger for installations without cover .75 108-173 7.20

Multi-Tier Bracket Aligns SC element hangers when used without cover M2 Bracket 1.00 108-177 8.33 M2 Bracket with two SC hangers 2.50 108-178 17.97 M3 Bracket 1.25 108-179 11.65 M3 Bracket with three SC hangers 3.50 108-180 25.88

Hanging Strip for Multi/Pak 93/95 (This strip is 15⁄8" wide) Sold in 4ft. lengths. 0.2/ft. 294-001 3.13/ft.

Hanging Strip for JL, JA and Multi/Pak 90 Used with hook braces where normal brackets 0.2/ft. 108-175 3.13/ft. cannot be used. Sold in 4ft. lengths.

Hook Brace for JL and JA slope top enclosures Used with hanging strip where normal brackets cannot be used .20 108-176 4.63

AC Adapter Bracket Permits adding cover to bare fin-tube installation without removing elements (Hanger not included) AC-10 .75 108-182 7.50 AC-14 1.00 108-183 7.50 AC-21 1.25 108-189 9.50 AC-28 1.50 108-185 24.00

Tamper-proof lock (JA-JL-90, R, JR, RR, RAG) Locks front cover to lower arm of bracket .03 108-181 7.43

Tamper-proof lock (93-95) Locks front cover to bracket .01 294-009 6.03

Wall gasketing 1.42 For dustproof seal between top of cover and wall .01 108-184 per linear ft. Architectural Aluminum Grille — 2, 3, 4, 5, 6, 7 & 8 ft lengths 295-249 30.74 ft.

Key lock valve cover door: for 90, 95, 93, J, R, FS, HD & LC series 41.60

Tube Size and Material

11⁄4" I.P.S. steel


2" I.P.S. steel

3⁄4" copper

1" copper

11⁄4" copper

3⁄4" copper

3⁄4" copper

1" copper

11⁄4" copper


Fin Size and Material

41⁄4" x 4 1⁄4" x .024" electro gal. steel

41⁄4" x 41⁄4 " x .024" electro gal. steel

41⁄4" x 41⁄4 " x .024"

electro gal. steel

41⁄4" x 41⁄4 " x .020" aluminum

41⁄4" x 41⁄4 " x .020" aluminum

41⁄4" x 41⁄4 " x .020" aluminum

3" x 31⁄4" x 0.024" aluminum

23⁄4" x 21⁄2" x .011" aluminum

3" x 21⁄2" x .011" aluminum

3" x 31⁄4" x .020" aluminum

3" x 31⁄4" x .028" aluminum steel

Fins Per Foot

32

40

32

40

40

40

48

55

48

48

48

Shipping Wt./Ft. (lbs.)

6.00

7.00

7.00

1.65

1.90

2.25

1.30

.90

1.00

1.60

4.60

Order Code

106-001

106-002

106-003

105-007

105-004

105-001

103-061

103-005

103-006

103-007

103-008

Price/Ft.

$29.90

33.70

35.14

28.84

31.29

35.28

22.14

13.72

17.44

31.79

31.62

Standard lengths: S and C Series: 2, 3, 31⁄2, 4, 5, 6, 7, 8, 9, 10, 11 and 12 feet. *(C-340 only available up to 10’). H Series: 2, 3, 31⁄2, 4, 5, 6, 7 and 8 feet.

14

Add to valve cover

Trough Heater

15

ElementRecommended number of bracket supports and slide cradles for given length

2 3 4

S-532, S-540 2-4 ft. 5-7 ft. 8 ft.

S-832 2-4 ft. 5-6 ft. 7-8 ft.

C-340, C-440, C-540 2-5 ft. 6-8 ft. –

TH SERIES

Model Description Part # Trade Price

THL See “A” in diagram below See Above Chart

THB TR Baffle 107504 $4.64/ft

THBS Liner Brackets Support 107503 $10.09 ea.

SC Hanger Slide Cradle 107220 $4.79 ea.

Element Select from 6 models See Element Price Page 14

Grille The floor grille is supplied by others. There are several grille manufacturers who supply custom grilles designed to match the rooms décor.

Galvanized Steel

Length – Order Codes Trade Price2 ft. 3 ft. 4 ft. 5 ft. 6 ft. 7 ft. 8 ft.

20 Gauge 107502020 107502030 107502040 107502050 107502060 107520070 107502080 $14.10/ft.

18 Gauge 107502120 107502130 107502140 107520150 107520160 107520170 107520180 $16.86/ft.

16 Gauge 107502220 107502230 107520240 107520250 107520260 107520270 107520280 $19.60/ft.

Prices in U.S. Dollars For trade prices on additional Slant/Fin

products, refer to...

Slant/Fin baseboard — Publication No. R-01.

Slant/Fin boilers — Publication No. B-01.

Slant/Fin Boiler Parts – Publication No. BP-01.

SLANT/FIN CORPORATION, Greenvale, N.Y. 11548 • Phone: (516) 484-2600 FAX: (516) 484-0933 • Canada: Slant/Fin LTD/LTEE, Mississauga, Ontario

www.slantfin.com

©Slant/Fin Corp. 2019 • Printed in the U.S.A. 619 • Publication No. R-01C

Order Cancellation Policy- a cancellation fee, ranging up to 100% of order, may be assessed on orders being cancelled. This cancellation fee will be determined based on effect on inventory level of material as well as stage of production at time of cancellation. Painted product will have increased cancellation fee or may be non-cancellable.

FAX ORDERS TO: 516-484-2694 EMAIL ORDERS TO: [email protected]

Touch Up Paint (for Slant/Fin stock, Nu-White color)

Item Packing Per Master Carton

Ship Wt.

Order Code

Price Each

Nu-White Touch-up mini bottle w/brush 12 .6 oz 102-652-000 $10.24

Nu-White Touch-up spray paint, 4.5 oz. can 12 9.5 oz 102-650-000 $10.24

Touch Up Paint (for custom painted material)

Item Packing Per Master Carton

Ship Wt.

Order Code

Price Each

Shell White (#S-41) * 12 4.5 oz Spray 101-030-000 $31.54

Almond * 12 4.5 oz Spray 107-189-000 $31.54

Mineral Bronze * 12 4.5 oz Spray 107-188-000 $31.54

Chocolate * 12 4.5 oz Spray 107-199-Z00 $31.54

Chestnut * 12 4.5 oz Spray 107-199-Y00 $31.54

Architectural Bronze * 12 4.5 oz Spray 107-199-U00 $31.54

Rubbed Bronze * 12 4.5 oz Spray 107-186-000 $31.54

Corvel Gray * 12 4.5 oz Spray 101-030-020 $31.54

Cloud Grey * 12 4.5 oz Spray 107-185-000 $31.54

Mirror Black * 12 4.5 oz Spray 107-183-000 $31.54

Flat Black * 12 4.5 oz Spray 107-184-000 $31.54

Brite White * 12 4.5 oz Spray 107-182-000 $31.54

* Ground transportation only

Brite White Touch-up mini bottle w/brush 12 .6 oz 102-653-000 $13.48

SLANT/FIN COMMERCIAL RADIATION

Documents

Transcript of SLANT/FIN COMMERCIAL RADIATION