section 10 - Customs-Planet

59
10 10 585

Transcript of section 10 - Customs-Planet

1010

585

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

586

PART # DESCRIPTION SUG. RETAILTRIPLE SILICONE2104-0148 00-09 FXST, FLST models $17.952104-0140 84-99 FXST, FLST models, 91-98 FXD, 80-84 FL models 17.952104-0146 99-09 FXD, FXDWG models 17.952104-0142 82-99 FXR models 17.952104-0145 99-08 FLT, FLHT, FLHR, FLTR models 20.952104-0144 97-98 FLT, FLHT, FLHR, FLTR models 18.952104-0141 85-96 FLT, FLHT, FLHR, FLTR models 17.952104-0143 86-03 XL models 17.95

PART # DESCRIPTION SUG. RETAILTRIPLE SILICONE (CONT)2104-0147 98-03 XL 1200s $33.952104-0139 Universal w/ 180° and 90° boots (except Twin Cam) 21.952104-0149 Universal dual plug w/ two 40” wires and ends

(except Twin Cam) 26.95COPPER CORE2104-0138 65-E78 FX, FL models 17.952104-0137 71-E78 XL models 17.952104-0136 58-69 XL w/ a magneto 19.95

8MM SPARK PLUG WIRE SETS•Constructed with silicone throughout the jacket, insulation and core to deliver high-temperature resistance

•Rated at SAE Class E J2031 with a continuous operating temperature of 450°F

•Copper core wires should be used on bikes with magneto- or points-style ignitions

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR ALL 00-09 FXST/FLST MODELS2104-0109 Polished stainless $50.950802-3041 Sterling Chromite II 50.952104-0024 Candy apple red 50.952104-0025 Candy apple blue 50.952104-0026 Black pearl 50.952104-0027 Gold 50.95FOR 65-84 FX/FL, 84-99 FXST/FLST (W/ COIL ADJACENT TO OIL TANK), 91-98 DYNA GLIDE2104-0096 Polished stainless 50.950802-3023 Sterling Chromite II 50.952104-0009 Candy apple red 50.952104-0010 Candy apple blue 50.952104-0014 Black pearl 50.952104-0015 Gold 50.95FOR 99-08 FLT/FLHT/FLHR/FLTR2104-0107 Polished stainless 50.950802-3033 Sterling Chromite II 50.952104-0020 Candy apple red 50.952104-0021 Candy apple blue 50.952104-0022 Black pearl 50.952104-0023 Gold 50.95FOR 97-98 FLT/FLHT/FLHR/FLTR2104-0106 Polished stainless 50.950802-3032 Sterling Chromite II 50.95

PART # DESCRIPTION SUG. RETAILFOR 97-98 FLT/FLHT/FLHR/FLTR (CONT)2104-0018 Candy apple red $50.952104-0019 Candy apple blue 50.95FOR 85-96 FLT/FLHT/FLHR2104-0104 Polished stainless 50.950802-3031 Sterling Chromite II 50.952104-0016 Candy apple red 50.952104-0017 Candy apple blue 50.95FOR 99-09 DYNA GLIDE2104-0108 Polished stainless 50.950802-3040 Sterling Chromite II 50.952104-0031 Candy apple red 50.952104-0032 Candy apple blue 50.952104-0033 Black pearl 50.952104-0034 Gold 50.95FOR 82-94, 99-00 FXR2104-0099 Polished stainless 50.950802-3030 Sterling Chromite II 50.952104-0028 Candy apple red 50.952104-0029 Candy apple blue 50.952104-0030 Black pearl 50.95FOR 07-09 XL2104-0134 Polished stainless 50.952104-0131 Sterling Chromite II 50.952104-0135 Candy apple red 50.95

PART # DESCRIPTION SUG. RETAILFOR 07-09 XL (CONT)2104-0130 Candy apple blue $50.952104-0133 Black pearl 50.952104-0132 Gold 50.95FOR 04-06 XL2104-0110 Polished stainless 50.952104-0045 Sterling Chromite II 50.952104-0041 Candy apple red 50.952104-0042 Candy apple blue 50.952104-0043 Black pearl 50.952104-0044 Gold 50.95FOR 86-03 XL (180° BOOT) EXCEPT 98-03 1200S2104-0098 Polished stainless 50.950802-3029 Sterling Chromite II 50.952104-0037 Candy apple red 50.952104-0038 Candy apple blue 50.952104-0039 Black pearl 50.952104-0040 Gold 50.95FOR 65-85 XL2104-0097 Polished stainless 50.950802-3024 Sterling Chromite II 50.952104-0035 Candy apple red 50.952104-0036 Candy apple blue 50.952104-0035 Candy apple red 50.952104-0036 Candy apple blue 50.95

BRAIDED SPARK PLUG WIRES•High-voltage, high-temperature, 8mm silicone ignition wires featuring high-performance suppression conductor cores for compatibility with all H-D ignition systems

•Posi-Lock spring clip terminals and the highest quality silicone spark plug boots

•Tuned (ohm resistance) conductor core is engineered to duplicate OEM specifications for computer module compatibility to ensure maximum performance and clean spark delivery

•Heavy-walled extreme duty crystal clear Teflon® outer insulation eliminates the need for grounding wires and ensures no interference with late model computer modules

•Each strand of the outer braid is coated with a plastic enamel and then covered with a clear Teflon skin•Perfect match to Magnum braided clutch, throttle and idle cables as well as brake lines•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL162082S For 82-94, 99-00 FXR, FXRS, FXRT and FXLR $40.95162087S For 91-98 Dyna Glide; 84-90 FXST/FLST models; 85 FXEF and FXSB; 85-86 FXWG; 79-85 XL, XLCH and XLX; 79-82 XLS 40.95162073S For 65-84 FL and FLH; 71-85 FX (except 80-82 FXWG and 84 FXST) 40.95162086S For 86-03 883, 1100 and 1200 XL (except 1200S) 40.95162074S For 65-85 XL and XLH; 79-82 XLS 38.95

ARMOR SHIELD CUSTOM 8MM WIRE SETS•Feature premium blue 8mm suppression silicone wire, heavy-duty blue silicone plug boots and Accel’s Armor Shield braid with stainless steel ferrules

•Give a handsome metallic look while providing additional protection to the most vulnerable part of the ignition system

•Come complete with installation instructions and hardware grounding kit

2104-0149

162073S

0802-3041

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

587

THUNDERVOLT 50 WIRES•Certified dyno tests showed a 2.1 horsepower increase when used in Twin Cam motors•Unloads spark plugs for easier starts, smoother, stronger running and better gas mileage•Wires feature Ferrite Spiral Wound Coated cores, which are made of an exclusive copper/nickel alloy that is bonded by a conductive acrylic latex coating

•Core resistance of 50 ohms/foot•Fat .409” wires also feature triple-layer Zimplex® silicone covers, able to withstand temperatures up to 600°F•Available in 10.4mm or 8.2mm•Universal wires with standard boots are 24” long; universal wires with Pro Comp boots are 36” long

PART # DESCRIPTION SUG. RETAIL10.4MM0802-2031 For 00-09 FLST/FXST/FXSTD, 99-09 Dyna Glide,

(CV/EFI), 18”/7” leads, 90° plug boots $70.950802-0031 For 84-99 FXST/FLST, 91-98 Dyna Glide,

65-85 FX/FL 65-85 XL, 16”/7” leads, 90° plug boots 70.950802-0035 For 82-94/99-00 FXR, 12” leads, 90° plug boots 70.950802-2033 For 99-06 FLT/FLHT/FLHR/FLTR/FLHX (CV),

18”/9” leads, 180° plug boots 70.950802-2034 For 99-09 FLT/FLHT/FLHR/FLTR/FLHX (EFI)

04-06 XL, 21” leads, 180° plug boots 70.950802-0033 For 84-98 FLT/FLHT; 86-03 XL (except 98-03 1200S),

18”/9” leads, 180° plug boots 70.950802-6081 24” universal; 90° boots 70.950802-6083 24” universal; 135° boots 70.950802-6085 24” universal; 180° boots 70.950802-8085 36” universal; 180° Pro Comp boots;

for water-cooled motors 70.95

PART # DESCRIPTION SUG. RETAIL8.2MM2104-0077 For 00-09 FLST/FXST/FXSTD, 99-09 Dyna Glide,

(CV/EFI), 18”/7” leads, 90° plug boots $49.952104-0080 For 84-99 FXST/FLST, 91-98 Dyna Glide,

65-85 FX/FL 65-85 XL, 16”/7” leads, 90° plug boots 49.952104-0082 For all FXR models w/ center mount coil,

12” leads, 90° plug boots 49.952104-0079 For 99-09 FLHT/FLHR/FLTR/FLHX (EFI), 04-06 XL,

21” leads, 180° plug boots 49.952104-0078 For 99-06 FLHT/FLHR/FLTR/FLHX (CV),

18”/9” leads, 180° plug boots 49.952104-0081 For 80-98 FLT/FLHT; 86-03 XL (except 98-03 1200S),

18”/9” leads, 180° plug boots 49.952104-0083 24” universal; 90° boots 49.952104-0084 24” universal; 180° boots 49.95

8MM CUSTOM-COLORED PLUG WIRES•Designer plug wire sets come in distinctive, highly visible colors

•Pre-cut and have the plug/coil boots and terminals already installed•Boots and wires are made from extra-high-temperature silicone, which gives protection up to 600°F

•Spiro-Pro core provides up to 10 times the conductivity of a standard carbon-core wire

•Low resistance means they run cooler and last 3-4 times longer than carbon-core wires

•Designed for electronic ignitions, but also work great on point types•Available in prefitted styles and universal styles with 90°, 180° and 135° plug boots

•Universal wire kits feature 24” wire leads (not for Twin Cam)•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 00-09 FXST, FLST; 99-09 DYNA GLIDESDS-242601 Black $33.95DS-242603 Red 33.95DS-242604 Purple 33.95DS-242605 Yellow 33.95DS-242607 Blue 33.95DS-242609 Orange 33.95DS-242610 Green 33.952104-0088 Gray w/ black boots 33.95FOR 99-09 FLHT, FLTR, FLHR, FLHX WITH CARB.DS-242611 Black 33.95DS-242613 Red 33.95DS-242614 Purple 33.95DS-242615 Yellow 33.95DS-242617 Blue 33.95DS-242619 Orange 33.95DS-242620 Green 33.952104-0089 Gray w/ black boots 33.95FOR 99-08 FLHT, FLHR, FLTR, FLHX WITH FUEL INJECTION, 04-06 XL (21” LEADS; 180° BOOT)2104-0069 Black 33.952104-0071 Red 33.952104-0072 Purple 33.952104-0073 Yellow 33.952104-0074 Blue 33.952104-0075 Orange 33.952104-0076 Green 33.952104-0090 Gray w/ black boots 33.95

0802-2033

DS-242132

DS-242347

DS-242133

DS-242349

DS-242155

DS-242157

2104-0086 Universal wire kits

PART # DESCRIPTION SUG. RETAILFOR 65-99 FX, FL, FXST, FXWG (WITH COIL ADJACENT TO OIL TANK), 91-98 DYNA GLIDES AND 65-85 XL (90° BOOT)DS-242132 Black $33.95DS-242149 Red 33.95DS-242347 Purple 33.95DS-242133 Yellow 33.95DS-242349 Blue 33.95DS-242151 Hot orange 33.952104-0091 Gray w/ black boots 33.95FOR 82-94/99 FXR (90° BOOT)DS-242142 Black 33.95DS-242153 Red 33.95DS-242350 Purple 33.95DS-242143 Yellow 33.95DS-242352 Blue 33.95DS-242155 Hot orange 33.95FOR 80-98 FLT, FLHT AND 86-03 XL (EXCEPT 98-03 1200S) (180° BOOT)DS-242146 Black 33.95DS-242157 Red 33.95DS-242353 Purple 33.95DS-242147 Yellow 33.95DS-242354 Blue 33.95DS-242159 Hot orange 33.952104-0092 Gray w/ black boots 33.95

PART # DESCRIPTION SUG. RETAILUNIVERSAL 90° WIRE KITSDS-242030 Black $33.95DS-242032 Red 33.95DS-242355 Purple 33.95DS-242033 Yellow 33.95DS-242034 Blue 33.95DS-242036 Hot orange 33.95DS-242037 Hot green 33.952104-0086 Gray w/ black boots 33.95UNIVERSAL 135° WIRE KITSDS-242358 Black 33.95DS-242360 Red 33.95DS-242361 Purple 33.95DS-242362 Yellow 33.95DS-242364 Blue 33.95DS-242366 Hot orange 33.95DS-242367 Hot green 33.95UNIVERSAL 180° WIRE KITSDS-242040 Black 33.95DS-242042 Red 33.95DS-242356 Purple 33.95DS-242043 Yellow 33.95DS-242044 Blue 33.95DS-242046 Hot orange 33.95DS-242047 Hot green 33.952104-0087 Gray w/ black boots 33.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

588

CUSTOM COLORED 409 PRO RACE WIRES•Same features as the Sumax 8mm wires but larger (10.4mm) for that fat look

•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 00-09 FXST, FLST; 99-09 DYNA GLIDE MODELS (90° BOOT)DS-242171 Black $49.95DS-242174 Red 49.95DS-242186 Blue 49.95FOR 99-06 FLHT, FLTR, FLHR, FLHX WITH CARB. (180° BOOT)DS-242173 Black 49.95DS-242185 Red 49.95DS-242190 Blue 49.95FOR 99-08 FLHT, FLHR, FLTR WITH FUEL INJECTION 04-06 XL (180° BOOT)2104-0093 Black 49.952104-0094 Red 49.952104-0095 Blue 49.95

PART # DESCRIPTION SUG. RETAILFOR 65-99 FX, FL, FXWG, FXST, FLST (WITH COIL ADJACENT TO OIL TANK), 91-98 DYNA GLIDE MODELS AND 65-85 XL (90° BOOT)DS-242001 Black $49.95DS-242005 Red 49.95DS-242118 Blue 49.95FOR 82-94/99 FXR (90° BOOT)DS-242004 Black 49.95DS-242013 Red 49.95DS-242163 Blue 49.95FOR 80-98 FLT, FLHT AND 86-03 XL (EXCEPT 98-03 1200S) (180° BOOT)DS-242002 Black 49.95DS-242011 Red 49.95DS-242119 Blue 49.95

BLUE STREAK XXX 8MM SPARK PLUG WIRE SETS•Wires utilize a triple silicone construction: jacket, insulation and core (except copper core)

•Rated at SAE CLASS E J2031 with a continuous operating temperature of 450°F

•Copper core wire sets are available for bikes with magneto or points type ignitions

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILTRIPLE SILICONEDS-242217 For 00-09 FXST, FLST models $17.95DS-242168 For 84-99 FXST, FLST models, 91-98 FXD,

80-84 FL models 17.95DS-242191 For 99-09 FXD, FXDWG models 17.95DS-242193 For 82-99 FXR models 17.95DS-242196 For 99-08 FLT, FLHT, FLHR, FLTR models 19.95DS-242195 For 97-98 FLT, FLHT, FLHR, FLTR models 18.95DS-242169 For 85-96 FLT, FLHT, FLHR, FLTR models 17.95DS-242194 For 86-03 XL models 17.95

PART # DESCRIPTION SUG. RETAILTRIPLE SILICONE (CONT)DS-242198 For 98-03 XL 1200s (4-wire set) $33.95DS-242167 Universal 40” wire w/ 180° and 90° boots

(except Twin Cam) 21.952104-0008 Universal dual plug w/ two 40” wires

and ends (except Twin Cam) 35.95COPPER COREDS-242166 For 65-E78 FX/FL models 17.95DS-242165 For 71-E78 XL models 17.95DS-242164 For 58-69 XL w/ a magneto 19.95

HOTWIRES™ PERFORMANCE SPARK PLUG WIRES FROM NOLOGY™ ENGINEERING•Easier starting, smoother running and reduced fuel consumption•Each 8mm resistor-type wire has a capacitor built into the wire to allow a hotter, shorter spark

•Spark is up to 300 times more powerful than stock to promote faster and more complete fuel burn in the cylinder head

•A short spark duration of 4 nanoseconds actually reduces spark plug wear•Available in kits for specific applications or in universal kits•Sold in pairs

FITS MODELRED STD. COIL HEI COIL

BLACK STD. COIL HEI COIL

PREMADE KITS00-09 FXST/FLST, 99-09 Dyna DS-242279 - DS-242280 -84-99 Softails, 91-98 Dyna DS-242251 DS-242253 DS-242252 DS-24225482-94 FXR, 99 FXR DS-242247 - DS-242248 DS-24225099-08 FLHT, FLHR, FLTR, FLHX DS-242269 - DS-242276 -92-98 FLHT, FLHR, FLT DS-242243 - DS-242244 DS-24224698-03 XL 1200 Sport (4-wire kit) DS-242277 - - -

FITS MODELRED STD. COIL HEI COIL

BLACK STD. COIL HEI COIL

PREMADE KITS (CONT)79-03 XL (except 98-03 1200S) DS-242243 - DS-242244 DS-24224699-02 Buell M2 Cyclone DS-242474 DS-242475UNIVERSAL KITS (EXCEPT TWIN CAM)23” 90° plug boot DS-242255 - DS-242256 -30” 90° plug boot DS-242257 - DS-242258 -23” 180° plug boot - - DS-242260 -

PART # SUG. RETAILDS-242243 $94.95DS-242244 94.95DS-242246 94.95DS-242247 94.95DS-242248 94.95

PART # SUG. RETAILDS-242250 $94.95DS-242251 94.95DS-242252 94.95DS-242253 94.95DS-242254 94.95

PART # SUG. RETAILDS-242255 $94.95DS-242256 94.95DS-242257 99.95DS-242258 99.95DS-242260 94.95

PART # SUG. RETAILDS-242269 $94.95DS-242276 94.95DS-242277 197.95DS-242279 94.95DS-242280 94.95

PART # SUG. RETAILDS-242474 $94.95DS-242475 94.95

PRICE LIST

DS-242001

DS-242011

DS-242119

DS-242198

DS-242167

2104-0008

DS-242256

DS-242251

DS-242257

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

PART # DESCRIPTION SUG. RETAIL2104-0066 For 99-08 FLHT, FLHR, FLHX and FLTR models $69.952104-0065 For 85-98 FLHT and FLT models 69.952104-0063 For 84-99 Softail models 69.952104-0062 For 99-09 FXD/FXDWG and 00-09 FXST/FLST models 69.95

PART # DESCRIPTION SUG. RETAIL2104-0064 For 82-00 FXR models $69.952104-0117 For 07-09 XL models 69.952104-0068 For 04-06 XL models 69.952104-0067 For 86-03 XL models (except 98-03 1200S) 69.95

SPARK PLUG WIRE KIT•Black, 8mm spark plug wire kits•Highest spark energy transfer and EMI/RFI suppression; 40 ohms per foot

•Nickel copper alloy conductor wire with Kevlar® core center•Insulated core is braided with fiberglass to improve resistance to terminal pull-off

•Dyno-proven to increase horsepower over OEM wires•Made in the U.S.A.

2104-0117

PART # DESCRIPTIONSUG.

RETAIL0802-5009 For 99-09 Twin Cam models (except 09 Dressers)

(8mm) $26.95DS-242022 For 91-99 FXST/FLST models 23.95DS-242017 For 84-90 FXST/FLST, 91-98 Dynas, 79-84 FX

and 79-85 XL models 23.95DS-242021 For 82-94, 99 FXR/FXLR models 23.95

PART # DESCRIPTIONSUG.

RETAILDS-242019 For 85-98 FLT $23.95DS-242018 For 80-84 FLT/FLHT models 23.95DS-242020 For 79-84 FLH, FX, 80 FXE, 83 FXWG 23.95DS-242016 For 86-03 XL (except 98-03 1200S) 23.95DS-242014 41” universal kit w/ 90° plug caps (except Twin Cam) 26.95DS-242015 41” universal kit w/ 135° plug caps (except Twin Cam) 27.95

FIREWIRE® 8.5MM HI-POWER IGNITION WIRE SETS•The Hi-Power reactive spiral-core design suppresses radio frequency interference and is recommended for use with Crane’s HI-4 ignition systems and coils

•Wire sets also work well with other high-performance ignition systems

•Black silicone insulation resists temperatures up to 600°F•Available for most models as well as universal fitments

DS-242014

UNIVERSAL SPARK PLUG WIRE KITS•8mm spiral-wound silicone wires (black)

•Include 41” wires, boots and terminals

NOTE: Not for Twin Cam applications.

DS-242330

DS-242331

PART # DESCRIPTION SUG. RETAILDW800 8mm suppression

plug wire kit $19.95

8MM SUPPRESSION PLUG WIRE SET•Dyna suppression core spark plug wires use the highest-grade graphite suppression core to reduce electrical noise and increase engine performance

•Two wires, each 48” L (cut to length; can be used for up to four cylinders)

NOTE: Not for Twin Cam applications.

PART # DESCRIPTION SUG. RETAILFOR TWIN CAM MODELS WITH 90° SPARK PLUG BOOTS AND STRAIGHT COIL BOOTS7806-1556 7mm spark plug wire kit (36”) $20.95FOR BIG TWIN AND XL MODELS7806-1557 8.5mm spark plug wire kit (includes 90° and 115° spark plug boots

and assorted coil boots and terminals) (18”/24”) 24.95

UNIVERSAL SPARK PLUG WIRE KITS•Wires available in 7mm or 8.5mm dia.•Kit includes plug wires, terminals and boots for many applications•Made in the U.S.A.

7806-1557

PART # DESCRIPTION SUG. RETAIL2104-0046 Black $60.952104-0047 Blue 61.952104-0048 Red 58.952104-0049 Yellow 61.95

THUNDERSPORT UNIVERSAL 5MM IGNITION WIRE KITS•Half the diameter of stock wires, and flexible•Run through cylinder heads, rocker covers and frame tubes for a completely hidden, clean look

•150 ohms per foot: 5mm silicone jacket is rated for over 550°F•Available in four colors; black, blue, red and yellow•Kit includes two 5’ leads with 90° spark plug ends

NOTE: Not for Twin Cam applications.

2104-0046 2104-0047 2104-0048

2104-0049

589

PART # DESCRIPTION SUG. RETAILDS-242330 Single-plug wire kit $16.95DS-242331 Dual-plug wire kit 31.95

7806-1556

DS-242015

2104-0063

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

590

PART # DESCRIPTION SUG. RETAIL

DS-242679 For 00-09 FXST/FLST $29.952104-0121 For 91-99 FXST/FLST 29.95DS-242676 For 99-09 FXD/FXDWG 29.952104-0119 For 82-94 FXR 29.95DS-242677 For 99-08 FLHT/FLHR/FLTR/FLHX 29.952104-0122 For 97-98 FLT/FLHT/FLHR 29.95

PART # DESCRIPTION SUG. RETAIL

2104-0123 For 94-96 FLT/FLHT/FLHR $29.95DS-242678 For 98-03 XL 1200S (4-wire set) 61.952104-0120 For 86-03 XL 29.95DS-242675 For 96-98 Buell 29.95DS-242676 For 99-02 Buell 29.95

300+ CUSTOM FIT 8MM IGNITION WIRE SETS•Black silicone jacket with aramid core and fiberglass braiding•Terminal ends are high-conductivity brass with silicone boots•Eliminate electrical leakage; provide excellent performance in high-temperature applications•Work with electronic- or point-type ignitions

FITS MODEL YELLOWSUG.

RETAIL BLACKSUG.

RETAIL

91-99 FXST, FXSTC, FLST and FLSTC 162089 $23.95 172089B $23.9584-90 FXST, FXSTC, FLST and FLSTC; 91-98 Dyna;

85-86 FX; 79-85 XL and XLCH; 79-82 XLS 162072 23.95 172072B 23.9582-94, 99 FXR, FXRS, FXRT and FXLR 162082 23.95 172082B 23.95

FITS MODEL YELLOWSUG.

RETAIL BLACKSUG.

RETAIL

85-98 FLT and FLHT 162090 $24.95 172090B $23.9580-84 FLT, FLHT, FLHTC and FLTC 162083 24.95 172083B 23.95L78-84 FLH and FX; 80 FXE; 83 FXWG 162071 23.95 172071B 23.9586-03 XL except 1200S 162086 23.95 172086B 23.95

FITS MODEL YELLOW SUG. RETAIL BLACK SUG. RETAIL

65-E78 FL and FLH; 71-E78 FX and FXE 162073 $23.95 172073B $23.9571-E78 XL and XLCH 162074 23.95 172074B 23.9558-69 XL and XLCH (w/ magneto) 162075 24.95 172075B 24.95

COPPER CORE

CUSTOM 8.8MM WIRE SETS•These yellow or black heavy-duty silicone 8.8mm wire sets are cut to size and available with suppressor core or copper core wire

PART # DESCRIPTION SUG. RETAIL

DS-242187 Plug wire separators (pr.) $20.95

8MM PLUG WIRE SEPARATORS•Chrome-finished super-custom plug wire separators with grooved lines milled into them; include chrome screws

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL

2107-2578 8.8mm plug-wire separator $27.95

8.8MM PLUG-WIRE SEPARATOR•Chrome billet T-6 aluminum•Holds wires apart for a clean look•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL

DS-305003 Chrome headbolt/spark plug covers for 86-99 80” (set) $39.95DS-305005 Repl. rubber grommets for DS-305003 (pr.) 3.95DS-305009 Chrome headbolt/spark plug covers for 86-03 XL (except 98-03 1200S) (set) 39.95

CHROME HEADBOLT/SPARK PLUG COVERS•A step beyond individual headbolt covers and spark plug covers

•Drag and Billy Westbrook have teamed up to put an end to having to buy individual parts; our die-cast aluminum covers fit over the entire headbolt area as well as the spark plug base

•Beautiful detail to really accent the finned area of the head

DS-305003

DS-305009

PART # COLORSUG.

RETAILFOR 00-08 FXST, FLST MODELS2104-0115 Black $26.952104-0116 Yellow 26.952104-0128 Blue 26.952104-0129 Red 26.95FOR 99-08 FXD, FXDWG, 99-02 BUELLS MODELS2104-0111 Black 26.952104-0112 Yellow 26.952104-0124 Blue 26.95

PART # COLORSUG.

RETAILFOR 99-08 FXD, FXDWG, 99-02 BUELLS MODELS (CONT)2104-0125 Red $26.95FOR 99-08 FLHT, FLHR, FLHX, FLTR MODELS2104-0113 Black 26.952104-0114 Yellow 26.952104-0126 Blue 26.952104-0127 Red 26.95

8MM SPARK PLUG WIRE SETS•Deliver up to five times more energy to the spark plug

•Fully compatible with fuel-injection systems

•Can withstand temperatures over 500°•Will work great with carbureted engines as well•Silicone outer layer

DESCRIPTION YELLOW SUG. RETAIL BLACK SUG. RETAIL

Single-plug 90° ends DS-242651 $25.95 DS-242652 $25.95Dual-plug 90° ends DS-242653 51.95 DS-242654 52.95Single-plug straight ends DS-242655 25.95 DS-242656 25.95Dual-plug straight ends - - DS-242658 52.95

UNIVERSAL 8.8MM PLUG WIRE KITS•Graphite suppression core wires for street or strip•Available for single- or dual-plug head applications•Single-plug kits contain one 42” wire; dual-plug kits contain two 42” wires•Kits come with brass locking terminals and boots for male- or female-type coil ends•Made in the U.S.A.

NOTE: Not for Twin Cam applications.

DS-242651

DS-242652

DS-242653

DS-242679

DS-242676

NOTE: L78-present H-D ignition systems require the use of suppression core wire; copper wire may damage the ignition system.

50’ BLACK 5MM SPARK PLUG WIRE ROLL•Delivers up to 16 times lower resistance through the exclusive Ferro Spiral core•The Ferro Spiral core maximizes the energy delivery to the spark plug•Wrapped in a high-gloss black 550+° top quality silicone jacket•Can be run through the cylinder heads, rocker covers and the frame tubes•Comes in 50-ft. roll•Boots and connectors are not included

PART # DESCRIPTIONSUG.

RETAIL

2104-0085 50’ black 5mm spark plug wire roll $112.95

NOTE: Not for Twin Cam applications.

SUPPRESSOR CORE

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

PART # DESCRIPTION SUG. RETAILDS-196091 Chrome spark plug holder $16.95

CHROME SPARK PLUG HOLDER•A chrome-plated replica of the spark plug holder found on early Panheads, updated to accept even late-model Shovelhead deep-reach plugs

•Metal holder clamps onto the rear frame tube behind the oil tank on all Big Twin models and holds two extra spark plugs (not supplied)

•Held in place by a thumbscrew

PART # DESCRIPTION SUG. RETAIL2870368 Spark plug caddy $2.95

SPARK PLUG CADDY•Dual-plug caddy holds two 14mm spark plugs securely in place

PART # DESCRIPTION SUG. RETAILFIREDOMES0940-0447 For Evolution Big Twin, Shovelhead and iron XL (pr.) $19.950940-0448 For Twin Cam and Evolution XL (pr.) 24.95HEADBOLT COVERSDS-376492 For 86-09 Big Twin and XL models (4-pk.) 19.95

FIREDOMES AND HEADBOLT COVERS•A quick, easy way to dress up the engine

•Firedomes slip right over the spark plug, held in place with a rubber grommet

•Headbolt covers slip right over the hex of a spark plug; rubber grommet holds it in place

•Low-profile peaked design covers the entire headbolt•All feature a beautiful chrome finish•Firedomes sold in pairs, headbolt covers sold in 4-pk.

DS-376492

0940-0447

PART # DESCRIPTION SUG. RETAIL2104-0054 Red $24.952104-0055 Amber 24.952104-0056 Blue 24.95

LAZER NODES™•Give off a brilliant flash of spark every time your plugs fire

•Easy way to see if your machine has spark•Just cut your plug wire in desired Lazer Nodes location and install in minutes

•Work with standard or electronic ignitions•Assembled, double-sealed and tested•Fit most models with exposed wires

NOTE: Not for use on fuel-injected models.

2104-0054

2104-0055 2104-0056

PART # DESCRIPTIONSUG.

RETAILDS-305006 90° bend, blue $7.95DS-305007 90° bend, red 7.95DS-305010 Straight, red 7.95

PART # DESCRIPTIONSUG.

RETAILDS-305011 Straight, blue $7.95DS-305012 45° bend, red 7.95DS-305013 45° bend, blue 7.95

FLASHING SPARK PLUG CAPS•Fit 10, 12 and 14mm plugs with terminal nuts

•Accept 7 or 8mm plug wires•For terminal nut style plugs•Sold each

NOTE: Not for use on fuel-injected models.

DS-305006

DS-305007

DS-305010 DS-305011

PART # DESCRIPTION SUG. RETAILDS-242659 Spark plug indexer $21.95DS-242660 Index washers (30-pk.) 32.95

SPARK PLUG INDEXER•Index tool allows for specifying the location of the ground electrode for maximum flame front generation

•Soft copper spark plug washers are used in conjunction with the indexer to align ground electrode as well as adjust plug to piston clearance (washers sold separately)

•Gold anodized billet aluminum with knurled edges for hand-held use – can also be vise-mounted

•Designed for 14mm spark plugs•Made in the U.S.A.

DS-242660

PART # FITS MODEL GAP SUG. RETAILY2418P 99-09 Twin Cam .040” $17.95Y2410P 84-00 80” Evolution, 80-81 80” Shovelhead .040” 17.95Y2403P 75-79 74” Shovelhead .040” 17.95Y2418P 86-09 XL 883, 1100 and 1200 .040” 17.95Y2413P 79-85 XL 1000 .040” 17.95Y2402P 57-78 XL 900 and 1000 .030” 17.95BUELLY2418P 94-07 models .040” 17.95

“CYCLELITE” PLATINUM SPARK PLUGS•Accel’s platinum plugs are made from state-of-the-art components

•Platinum tipped for longer life and durability that holds a precise gap even longer

•Knurled chromium-nickel alloy side wire for greater durability and greater spark with reduced voltage

•Pure copper core decreases fouling•Sold in pairs; made in the U.S.A.

PART # FITS MODEL ACCEL # GAPSUG.

RETAILDS-242130 99-09 Twin Cam, 84-00 80” Evolution 2418 .040” $9.95DS-2421251 80-81 80” Shovelhead,

84-00 80” Evolution 2410 .040” 8.95DS-2421271, 2 80-81 80” Shovelhead 2410A .040” 9.95DS-242129 82-84 80” Shovelhead 2417 .040” 8.95DS-2421261 75-79 74” Shovelhead 2403A .040” 8.95DS-242122 75-79 74” Shovelhead 2403 .040” 8.95DS-242120 48-75 Pan, Shovelhead 2401 .025” 8.95DS-2421232 48-75 Pan, Shovelhead 2401A .025” 8.95DS-242130 86-09 XL 2418 .040” 8.95DS-2421242 57-78 XL 2402A .030” 8.95BUELLDS-242130 94-07 models 2418 .040” 9.951 Resistor-type plug.2 One heat range hotter than standard plug.

U-GROOVE SPARK PLUGS•Accel’s state-of-the-art, U-Groove spark plugs with ground electrodes, copper glass inner seal and an electric heat seal to prevent leakage in high-compression engines

•Permits the spark to develop a larger, fuller flash for a more complete burn

•Extra-wide heat range•Sold in pairs

PART # FITS MODEL SUG. RETAIL2103-0049 75-81 Big Twin and 84-00 Big Twin Evolution $12.95DS-2421131 Silverstone S6 spark plug for 48-74 Big Twin 11.952103-0050 86-09 XL, 99-09 Twin Cam and 94-07 Buell 14.951 BERU spark plug.

SILVER™ SPARK PLUGS•Forget iridium, copper or platinum electrodes; silver is the best electrical and thermal conductor of any metal, so the spark encounters the least resistance and little or no spark energy is lost

•Designed for performance but durable enough for everyday use•Large-diameter silver center electrode delivers the most powerful spark for increased horsepower and cleaner combustion

•Extremely resistant to corrosion so the electrode gap remains virtually unchanged for the life of the spark plug

•Provides widest heat range latitude•Sold each

591

DS-242659

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

592

PART # PLUG # DESCRIPTIONSUG.

RETAILDCPR7EIX DCPR7EIX For 99-09 Twin Cam $10.50BPR5EIX-11 BPR5EIX-11 For 84-00 80” Big Twin/Evolution 10.50BPR6EIX-11 BPR6EIX-11 For 83-85 XR 1000 10.50BPR6HIX BPR6HIX For 79-85 XL 10.50DCPR7EIX DCPR7EIX For 86-09 XL 10.502103-0009 KR8AI For 06-09 V-Rod 11.50

IRIDIUM IX SPARK PLUG•The ultimate in spark plug technology and performance from the industry leader

•The iridium electrode is 25% smaller than a platinum electrode, and it’s just 1/4 the size of a conventional nickel electrode

•Ultra-small diameter center electrode reduces voltage requirement and extends ignition system life

•New metal shell plating has enhanced anticorrosion qualities PART # DESCRIPTION SUG .RETAILDCPR7E/DCPR8E/2103-00181, 2 For 99-09 Twin Cam $3.70BPR5ES-11/BPR4ES-111 For 84-00 80” Evolution 2.60ZGR5C For 82-84 80” Shovelhead 3.35BPR5ES-11/BPR4ES-111 For 78-81 80” Shovelhead 2.60BPR7ES-11 For 75-80 74” Shovelhead 2.60R5670-5 For 48-74 74” Pan/Shovel 2.60DCPR7E For 86-09 XL 3.70BPR6HS-10 For 71-85 XL 2.45BPR6HS For 79-85 XL 2.45BPR6ES-11 For 83-85 XR 1000 2.60B6L For 57-78 XL 2.60DCPR8E For 02-09 VRSC 3.701 Hotter plug. 2 Cooler plug.

PART # GAP DESCRIPTION SUG. RETAILRA8HC .040” For 99-09 Twin Cam $2.75RN-12-YC .040” For 84-00 80” Evolution 2.60RN-13-LYC .040” For 80-84 80” Shovelhead 2.60RN-12-YC .040” For 80-81 80” Shovelhead 2.60N-12-YC .040” For 78-79 80” Shovelhead 2.50RN-12-YC .040” For 75-80 74” Shovelhead 2.60J-12-YC .025” For 48-74 Pan, Shovelhead 2.50RA8HC .040” For 86-09 XL 2.75RL-82-YC .040” For 79-85 XL 3.70RH8C .030” For 57-78 XL 3.20

COPPER PLUS™ SPARK PLUGS•Copper Plus spark plug has a copper core center electrode that allows for accurate control of heat range, optimizing performance, and longevity of the spark plug

•Patented SAC-9 semi-conductor resistor for maximum EMI and RFI suppression

•Patented Ultraseal™ coated shell for rust prevention•Sold each

NOTE: Part numbers beginning with “R” are resistor type. Order by Champion numbers.

E3 PLUG PART # DESCRIPTION SUG. RETAIL2103-0084 99-09 Twin Cam, 86-09 XL $9.952103-0083 78-81 Shovelhead, 82-83 XR 1000, 57-78 XL 9.95

SPARK PLUGS•Superior construction for serious power

•NGK makes plugs for almost every application and riding style

•Versatile plugs with wide operating heat ranges prevent fouling from running too cool and pre-ignition from running too hot

•Features include high alumina ceramics for improved heat dissipation and electrical insulation, deep-seated copper core for a wider heat range and a nickel alloy tip for longer life

E3 SPARK PLUGS•All-new plug design features a unique electrode shape that maximizes the power created by the spark plug – Diamond Fire technology

•Electrode is a combination of performance and new technology that results in an improved flame kernel shape

•This flame front ignites the bulk air/fuel mixture faster, moves heat into the combustion chamber faster and creates a more localized pressure front for faster pressure rise during the cylinder power stroke

•The result is more complete combustion and an improvement in engine performance

•A truly premium performance plug•Sold each

PART # FITS MODEL SUG. RETAIL2103-0071 For 99-09 Twin Cam $9.952103-0072 For 84-00 80” Evolution 9.952103-0074 For 82-84 80” Shovelhead 9.952103-0072 For 80-81 80” Shovelhead 9.952103-0072 For 75-80 74” Shovelhead 9.952103-0073 For 48-74 Pan, Shovelhead 9.952103-0071 For 86-09 XL 9.952103-0070 For 02-09 VRSCA/B V-Rod 9.952103-0071 For 94-07 Buell models 9.95

XTREME SPARK PLUGS•Premium plugs engineered with Iridium-enhanced .6mm finewire design

•Provides better overall ignitability, more focused ignition for faster fuel combustion and reduced fouling

PART # FITS MODELSUG.

RETAILAU-4164 For 99-09 Twin Cam $2.90AU-4265 For 84-00 80” Evolution 2.90AU-2585 For 82-84 80” Shovelhead 2.90AU-4265 For 80-81 80” Shovelhead 2.90AU-4265 For 75-80 74” Shovelhead 2.90AU-4275 For 48-74 Pan, Shovelhead 2.50AU-4164 For 86-09 XL 2.90AU-4123 For 79-85 XL 2.90AU-996 For 57-78 XL 2.502103-0069 For 02-09 VRSCA/B V-Rod 2.90AU-4164 For 94-07 Buell models 2.90

SPARK PLUGS•Designed for a sharper, leaner spark with tapered nickel/chrome alloy tip and copper center electrode

IRIDIUM PART # NGK REFERENCE # DESCRIPTIONSUG.

RETAILIXU22 DCPR7E For 99-09 Twin Cam, 86-09 XL $10.95IW20 BPR6ES-11 For 83-85 XR 100 10.95IW20 BPR6EVX-11 For 57-78 XL1 10.95IW16 BPR5ES-11 For 78-81 80” Shovelhead 10.95IW22 BPR7ES-11 For 75-80 74” Shovelhead 10.95IW16 B6-L For 57-78 XL 10.95IXU24 DCPR8E For 86-08 XL1 10.951 Cooler plug.

IRIDIUM SPARK PLUGS•Six times harder than platinum, iridium doesn’t melt in temperatures up to 4,000°F

•Because the plug’s iridium electrode can shrink to only 0.4mm, voltage requirements decrease while firing performance improves

•360° laser welding of electrode provides a seal that resists wear even in the worst conditions

•Ground electrode features a tapered cut and U-groove that form a large volume area for the flame’s center

•Use NGK reference chart to order and stock these plugs

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

593

IGNITION COILS•Performance, quality and value•35,000-40,000V output for all 70-06 ignitions•Available with black or chrome body

2102-0059

2102-00602102-0063

2102-0064 2102-0061

2102-0062

PART # DESCRIPTION SUG. RETAILDS-325479 2.7-ohm coil for models w/ electronic ignition

(except models w/ single-fire ignitions) $92.95DS-325467 4.6-ohm coil for models w/ point ignition 87.95

BLUE STREAK® IGNITION COILS•Feature 45,000V+ capacity for superior spark

•Heavy-duty construction for long life•Super-fast rise time for better response

•Bolt directly to stock coil bracket•Not for single-fire ignitions

NOTE: Not for Twin Cam applications.DS-325479

PART # DESCRIPTION SUG. RETAILDS-325689 Dual-fire compact ignition coil $67.95

DUAL-FIRE DUAL-TOWER COMPACT IGNITION COIL•Three-ohm coil features a closed-core design for greater efficiency

•Produces far greater energy in a small package than other popular high-performance coils

•Can be used with any Compu-Fire ignition system or any ignition that calls for a 3-ohm coil (except Dyna S and points-type ignitions)

•Sold each•Made in the U.S.A.

NOTE: Not for Twin Cam applications.

PART # DESCRIPTION SUG. RETAIL2102-0071 Left coil $78.95

PART # DESCRIPTION SUG. RETAIL2102-0072 Right coil $78.95

2.5 OHM SINGLE-FIRE COILS•Molded-case design with 2.5 ohms primary resistance and produce 100 millijoules of spark energy

•Long-duration spark produces maximum torque for today’s large-displacement high-performance V-Twin engines

•21/8” o.c. holes, case allows for easy mounting in tight locations using aftermarket coil bracket kits

•Sold each

NOTE: Not for Twin Cam applications.

2102-0071

PART # DESCRIPTION SUG. RETAIL2102-0078 For Twin Tec and other aftermarket applications $96.95

SINGLE-FIRE COIL•High-output single-fire coil•3-ohm primary coil is compatible with all Twin Tec and most aftermarket single-fire ignitions

•21/2” o.c. mounting holes

NOTE: Not for Twin Cam applications. PART # DESCRIPTION SUG. RETAIL7805-3031 For 99-06 Twin Cam carbureted models and 04-06 XL

models (except 99-01 FLHT); (repl. OEM #31655-99) $96.95

HIGH-OUTPUT IGNITION COIL•OEM single-fire design; 45,000V•Designed for aftermarket and OEM ignitions

PART # DESCRIPTION SUG. RETAILBLACK2102-0059 5 ohm/points ignition/dual fire $53.952102-0060 3 ohm/electronic ignition/dual fire 53.952102-0063 2.4 ohm/electronic ignition/single fire 89.952102-0064 0.5 ohm 99-06 Twin Cam (except 99-01

FLHT)/carb only 04-06 XL/single fire 84.95

2102-0072

PART # DESCRIPTION SUG. RETAILCHROME2102-0061 5 ohm/points ignition/dual fire $63.952102-0062 3 ohm/electronic ignition/dual fire 63.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

594

PART # DESCRIPTION SUG. RETAILFOR 84-99 EVOLUTION BIG TWIN SINGLE-FIRE APPLICATIONS2102-0079 Mini-coil kit $118.95

PART # DESCRIPTION SUG. RETAILFOR 84-99 EVOLUTION BIG TWIN SINGLE-FIRE APPLICATIONS (CONT)2102-0080 Mini-coil (ea.) $59.95

SINGLE-FIRE MINI IGNITION COIL KIT•Miniature coil intended for custom motorcycles where space is at a premium and a single-fire coil is required for maximum performance

•3-ohm primary is compatible with Twin Tec ignitions and most newer aftermarket single-fire ignitions

•Kit includes two coils, universal spark plug wire set, 90° and 135° spark plug boots and all required electrical terminals

•Coils also available separately (two coils required per application)

•Coil measures 2.4” L x 2.3” H x 1.6” W; weight is 7 oz.

NOTE: Not legal for sale or use on pollution-controlled vehicles.

2102-0079

2102-0080

PART # COLOR DESCRIPTION SUG. RETAIL2102-0131 Chrome Dual-fire for points-type ignition (4.7 ohm) $110.952102-0132 Chrome Dual-fire w/ electronic ignition (2.3 ohm) 117.952102-0133 Chrome Single-fire w/ electronic ignition (3.0 ohm), except XL, 1200S 138.957805-1041 Yellow Single-fire w/ electronic ignition (3.0 ohm), except XL, 1200S 130.95140407 Yellow Dual-fire w/ electronic ignition (2.3 ohm) 110.95140406 Yellow Dual-fire for points-type ignition (4.7 ohm) 103.952102-0105 Black Dual-fire for points-type ignition (4.7 ohm) 103.952102-0106 Black Dual-fire w/ electronic ignition (2.3 ohm) 110.952102-0107 Black Single-fire w/ electronic ignition (3.0 ohm), except XL, 1200S 130.95

HEI “SUPER COILS”•12V “Super Coils” feature a unique look to match their high-tech performance and state-of-the-art reliability

•Eye-catching chrome, bright yellow color and black color

•Available for both electronic and points-type ignitions

•Will not fit F.I. models or Twin Cam applications

2102-0132

7805-1041

2102-0107

PART # DESCRIPTIONSUG.

RETAIL140402 For 65-77 12V point ignition

models, as well as 78-79 12V electronic ignition FX, FL and XL models (4.5 ohm) $97.95

“POWER PULSE” COIL•Offers higher voltage, faster rise time and longer spark duration

•Features vibration- and heat-resistant construction and accepts 7mm or 8mm spark plug wires

PART # DESCRIPTION SUG. RETAIL140403 Two-coil $201.95140403S One-coil 108.95

UNIVERSAL “SUPER COIL” KITS•Extremely high output and available in one- and two-coil versions

•12V, 3 ohm coils ideal for custom and dual-plug applications; each comes with 9mm yellow plug wires

NOTE: Not for use with CDI ignitions or Twin Cam applications.

140403

140403S

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

COILS•The “industry standard” with 35,000V spark energies second to none•Designed to work with any Dyna ignition system•Can be used for single- or dual-plug applications•Made in the U.S.A.

NOTE: Not for Twin Cam applications.

PART # DESCRIPTION SUG. RETAILDC6-5 Twin Fire II Miniature, dual output towers $149.95

TWIN FIRE II COIL•Single fire just got easier•High-technology materials now make it possible to put two coils in the same space as the stock coil with greater output

•No exposed laminations to rust and degrade performance

•High voltage and primary terminals machined from brass

•High-impact thermoplastic housing is ultrasonically welded and sealed against moisture

•Compact size fits easily under stock covers

•Peak gap current in excess of 50mA•Over 40,000V per output•Rated at 3 ohms; accepts 7 to 8mm wires

NOTE: Not for Twin Cam applications.

NOTE: Not for use with DS6-2 ignition system.PART # DESCRIPTION SUG. RETAILDC6-4 Twin Fire, four output towers $154.95

TWIN FIRE COIL•Design incorporates two individual performance ignition coils into a single, easy-to-mount package that is only slightly larger than the stock coil and uses the stock mounting bracket

•Delivers spark voltage in excess of 30,000V with fast rise times and high energy

•For all single-fire, dual-plug head applications

•Can be used with any electronic advance ignition system that incorporates dwell control, but cannot be used with the DS6-2 Dyna S or similar ignitions

•All coils are rated at 3 ohms

NOTE: Not for Twin Cam applications.

0.5 OHM DUAL-OUTPUT COIL•Designed for aftermarket and OEM ignitions

PART # DESCRIPTIONSUG.

RETAIL2102-0141 For 99-06 Twin Cam

carbureted models and 04-06 XL models (except 99-01 FLHT); repl. OEM #31655-99 $149.95

PART # DESCRIPTION SUG. RETAILFOR CARBURATED 99-06 TWIN CAM, 04-06 XL MODELS2102-0023 Dual output (pr.) $159.952102-0024 Dual output (ea.) 99.952102-0025 Single output (pr.) 159.952102-0026 Single output (ea.) 99.95

0.5 OHMS MINIATURE COILS•Designed for use with the Dyna TC88 series ignitions or factory-installed electronic ignitions that use low-resistance coils

NOTE: Must not be used with ignitions that are not specifically designed to use low-resistance coils.

2102-0023

2102-0025

PART # DESCRIPTION SUG. RETAILDC10-1 5 ohm (black), angled single output street application (pr.) $154.95DC3-1 3 ohm (green), angled single output, for use with

DS-62 single-fire ignition only race application (pr.) 154.95DC2-1 1.5 ohm (brown), angled dual output (pr.) 154.95DC1-1 3 ohm (green), angled dual output (pr.) 154.95DC6-1 3 ohm (green), straight dual output, Std. H-D style

(85-up electronic ignition) (ea.) 79.95DC7-1 5.0 ohm (black), straight dual output, Std. H-D style

(points) (ea.) 79.95DC8-1 5.0 ohm (black), angled dual output (points) (pr.) 154.95

DC10-1

DC2-1

DC1-1

DC8-1

PART # DESCRIPTIONSUG.

RETAIL2102-0001 3 ohm, dual tower coil, single fire, dual plug (pr.) $159.952102-0003 3 ohm, dual tower coil, dual fire, single plug (ea.) 99.952102-0002 3 ohm, single tower coil, single fire, single plug (pr.) 159.952102-0004 3 ohm, single tower coil, single fire, single plug (ea.) 99.95

MINIATURE SERIES COILS•One of the smallest packages delivers high output with advanced magnetic core technology

•Designed for use with Dyna 2000 and 3000 series ignitions, factory-installed electronics, or with aftermarket ignitions that employ dwell control

•Secondary resistance is 11.5 ohms•Great for customs where coils need to be hidden

NOTE: Not for Twin Cam applications.

NOTE: Not for use with the Dyna “S”, DYNA III or earlier generation ignitions.

2102-0001

2102-0003

2102-0004

595

DC6-1

DC7-1

DC3-1

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

596

PART # DESCRIPTIONSUG.

RETAILDS-242311 3-ohm compact dual-fire coil $101.95DS-325486 3-ohm OEM-style dual-fire coil 101.95DS-325487 3-ohm single-fire coil pack 167.95

PART # DESCRIPTIONSUG.

RETAILDS-243089 3-ohm single-fire coil (fits stock bracket and cover) $179.952102-0007 0.5-ohm coil for 99-06 carbureted Twin Cam and

04-06 XL (fits under stock cover) 133.95

12V COILS•3-ohm coils feature extra-long high-voltage towers to increase resistance to arc over•Closely spaced electrical terminals make for cleaner hookup•Can be used with Crane HI-4 and HI4-E ignitions plus other aftermarket systems•PART # 2102-0007 is a 0.5-ohm coil, for use with OEM ignition or Crane PART #7806-1491 single-fire ignition

NOTE: Not for fuel-injected models or Twin Cam models unless noted.

DS-242311

DS-325486

DS-325487

DS-243089

2104-0007

PART # DESCRIPTION SUG. RETAILDS-326160 Single-tower, single-fire $86.95DS-326161 Dual-tower, dual-fire 89.95

PRO-FIRE™ 12V IGNITION COILS•Small size allows placement just about anywhere; perfect for dual coil setups•Two Pro-Fire 3-ohm coils are about the same size as one stock coil•Provide over 45,000V through entire rpm range•Coils are sold each

NOTE: Coils are to be used with the following ignitions only: Dyna 2000, Compu-Fire Elite 1, RevTech Digital, Crane HI-4, Screaming Eagle and OEM H-D ignitions. Not for Twin Cam or point-style ignitions.

DS-326161

DS-326160

PART # DESCRIPTION SUG. RETAIL2102-0021 3 ohm single-fire coil $134.95

HIGH-OUTPUT SINGLE-FIRE COIL•The perfect complement for the S&S IST ignition system

•This single-fire coil is actually two separate coils in a single package

•Works well with any single-fire ignition system•Not compatible with the S&S Variable Fuel Injection System

NOTE: Not for Twin Cam applications.

DUAL-COIL MOUNTING SYSTEM•Designed for mounting the popular Dyna end-mount coils in dual-coil applications (coils not included)

•Bracket assembly made of billet steel and aluminum•Decorative chrome cover conceals bracketry and coils•All required mounting hardware is included•Made in the U.S.A. by Custom Cycle Engineering

PART # DESCRIPTION SUG. RETAILDS-325451 Single-plug system for 82-94, 99 FXR $167.95

PART # DESCRIPTION SUG. RETAILDS-376580 For 91-99 FXST/FLST, 91-98 Dyna Glide

and 91-98 FLT models $194.95

DUAL-COIL MOUNTING SYSTEM WITH BILLET COVERS•Mounting system features a chrome billet aluminum ball-milled design cover

•Coil brackets accept most single- or dual-tower end-mount coils

•Coil mounting position allows wires to exit near the center of the covers

•Attaches to the top motor mount and bottom motor case stud with supplied mounting hardware

•Made in the U.S.A.

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

TOP MOTOR MOUNT COIL MOUNT•Fits Drag Specialties top motor mount PART #s DS-243606, DS-243607

•Also fits any top motor mount with 2” on-center 1/4” mount holes

•Accepts Dyna end-mount ignition coils, PART #s DC10-1, DC3-1, DC2-1, DC1-1 or DC8-1

•Keyhole is machined to fit ignition/starter switch PART #2106-0016; also fits ignition switch PART #DS-272114

•Includes four stainless steel button-head mount bolts with the heads turned down

PART # DESCRIPTIONSUG.

RETAILDS-325623 Single mount for 65-E82 FX, FL, FXWG w/ stock-style coils $54.95DS-325626 Dual mount for 82-94, 99 FXR and 82-86 4-speed models w/ Dyna or Andrews

end-mount-style coils 139.95DS-325627 Dual mount for 84-99 FXST, FLST, FLSTF w/ Dyna or Andrews end-mount-style coils 146.95DS-325628 Dual mount for 65-E82 FX, FL, FXWG w/ Dyna or Andrews end-mount-style coils 128.95DS-325629 Dual mount for 82-01 XL w/ Dyna, Andrews or Accel end-mount-style coils

(except 1200S) 122.95

SUPER-HEAVY-DUTY ALUMINUM SINGLE OR DUAL COIL BRACKETS•Super-heavy-duty billet aluminum coil brackets with a highly polished finish•Available for use with a stock configuration coil or with end-mount coil styles, such as Dyna “S” or Andrews coils (which are popular for dual coil installations)

•Made in the U.S.A.

NOTE: These mounts will not accept factory coil covers.

DS-325627

DS-325626

DS-325629

DS-325628DS-325623

PART # DESCRIPTIONSUG.

RETAILDS-376615 For use w/ PART

#DS-325626 (dual coil bracket for 82-94 FXR) $75.95

DS-376616 For use w/ PART #DS-325627/DS-325625 (dual coil bracket for 84-99 FXST/FLST and 91-98 Dyna Glide) 112.95

DS-376619 For use w/ PART #DS-325628 (dual coil bracket for 65-E82 FX, FL, FXWG) 116.95

STAINLESS STEEL COIL COVERS FOR DUAL COIL BRACKETS•Stainless steel coil covers are precisely formed, welded and then polished to a gleaming finish

•Fit in conjunction with Yankee Engineuity’s aluminum coil brackets

•Made in the U.S.A.

DS-376615 DS-376619

PART # DESCRIPTION SUG. RETAIL2102-0129 Chrome $109.95

PART # DESCRIPTION SUG. RETAIL2102-0130 Black $99.95

2102-0129

PART # DESCRIPTION SUG. RETAIL2102-0077 For 04-06 XL $29.95

CHROME COIL MOUNT BRACKET•Chrome-plated steel bracket; simple bolt-on assembly

•Includes ignition switch mount•Replaces OEM #31740-04, 31755-04

COIL COVER BRACKET•Repositions the stock coil cover when mounting a Dyna Twin Fire Coil

•Stamped steel with a cadmium-plated finish

PART # DESCRIPTION SUG. RETAIL1406001 Coil cover bracket for 84-06 Softail models $11.95

PART # DESCRIPTION SUG. RETAILDS-325469 For 65-E82 FX and FL; repl.

OEM #s 31724-65 and 31728-78 $15.95

HEAVY-DUTY COIL BRACKET•Exclusive replacement-type coil bracket made of solid steel for exceptional strength

•Features a chrome finish

IGNITION MODULE COVERS•Available in smooth, embossed with the Live to Ride/Eagle Spirit script and available in an all-chrome finish or a gold and chrome finish

•Sold eachDS-373680

DS-373695

DS-373696

DS-376616

597

2102-0130

PART # DESCRIPTION SUG. RETAILFOR 82-03 XL; REPL. OEM #66325-82DS-373680 Smooth chrome cover $13.95DS-373695 Chrome “Live to Ride” cover 29.95

PART # DESCRIPTION SUG. RETAILFOR 82-03 XL; REPL. OEM #66325-82 (CONT)DS-373696 Chrome/gold “Live to Ride” cover $49.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

598

LOUVERED COIL COVER•Chrome-plated and accented with five louvers for a truly custom appearance

PART # DESCRIPTION SUG. RETAILDS-376610 For 65-99 FXST, FX,

FXWG and FL $16.95

PART # DESCRIPTION SUG. RETAIL2102-0065 For 83-98 Dresser

and 83-03 XL $22.95

CHROME COIL COVER•Covers OEM and most aftermarket OEM-style coils in highly visible stock locations

•Mounts with OEM hardware•Includes cover for the top and back side of coil on XL model

•Not for fuel-injected models or 1200S PART # DESCRIPTION SUG. RETAILDS-376601 For 65-99 FX, FL, FXST

and FXWG, except Twin Cam 88 $17.95

SMOOTH COIL COVER•Plain chrome style•Covers coil when mounted in stock location

PART # DESCRIPTION SUG. RETAIL7805-0078 For 00-06 Softail models (carbureted); repl OEM #31606-00 $21.95DS-376614 For 99-05 Dyna Glide models (carbureted); repl. OEM #31644-99 22.95

CHROME COIL COVERS•Smooth stamped steel construction•Fits OEM-style coils SEE-THROUGH

COIL COVER•Chrome die-cast aluminum•Features five see-through grooves•Will also fit custom applications where OEM-style coil is mounted off the top motor mount

•Comes with mounting bolts and support strap

SWEPT-BACK CHROME COIL COVER•A great design that sweeps back to perfectly match the shape and contour of your oil tank

•Decorative panels can be painted or detailed to individualize your bike

•Covers OEM and most aftermarket coil styles•Mounting bracket included; uses OEM screws

PART # DESCRIPTION SUG. RETAIL2102-0155 For all 84-99 FXST/

FLST models $17.95PART # DESCRIPTION SUG. RETAILDS-373612 For 71-E84 XL models $21.95

COIL COVER•Two-piece chrome coil cover

PART # DESCRIPTION SUG. RETAILDS-373605 For 82-94, 99 FXR $17.95

COIL COVER•Brilliant chrome finish

PART # DESCRIPTION SUG. RETAIL1902-0071 For 82-99 FXR models

w/ OEM-style coil $38.95

7805-0078

DS-376614

PART # DESCRIPTION SUG. RETAILFOR USE WITH CRANE COIL DS-2423112102-0159 Smooth w/ logo $209.952102-0160 Stepped 209.95FOR USE WITH CRANE COIL DS-2430892102-0161 Smooth w/ logo 209.952102-0162 Stepped 209.95

COIL COVERS•Machined from billet aluminum, then finished in chrome

2102-0159

2102-0160

PART # DESCRIPTION SUG. RETAILDS-376609 For 84-99 Softail $30.95

CHROME OLD-STYLE COIL COVER•An old-style look for the newer bikes using OEM-style coils

•Sold individually

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

PART # DESCRIPTION SUG. RETAIL2101-0033 For carbureted 99-03 Twin Cam 88 models $249.952101-0022 Programming kit 99.952101-0055 Computer-to-module cable for kit 2101-0022 59.95

DYNA 2000TC PROGRAMMABLE DIGITAL PERFORMANCE IGNITION MODULE•Single-fire, fully programmable performance ignition•Sixteen programmable advance curves in three groups: stock to slightly modified motors, heavily modified motors and insanely modified motors

•Eight rev limiter settings in 250 rpm steps from 5750-7250 rpm•All functions offer full digital accuracy•Compatible with stock and performance coils - less than 1 ohm resistance•Coil current constantly monitored to provide constant full-spark energy•Uses all stock sensors and connectors•Built-in reverse battery and spike protection•Data recording includes total engine hours, time wide-open throttle, longest time operating at wide-open throttle, max rpm, seconds near rev limit and number of engine starts

•PC programmability makes possible an eight-point, fully definable, wide-open throttle curve and a fully definable part-throttle curve, programmable rev limit in 50 rpm steps, 0-5 programmable dead-cranking revs, total of +/- 10° rear cylinder offset, programmable rev limiter, and security lock out (pin # activated)

PART # DESCRIPTION SUG. RETAIL2101-0063 For carbureted

04-06 Twin Cam models $249.952101-0071 For 04-06 Sportster models 249.95

DYNA 2000TC-3 DIGITAL PERFORMANCE IGNITION MODULE•Module has a single connector•Loaded with 16 different advance curves, giving engine builder a wide range of curves to work with

•Adjustable rev limiter allows the user to select a rev limit ranging from 5750 to 7500 rpm in 250 rpm steps

PART # DESCRIPTION SUG. RETAILFOR 04-06 TWIN CAM AND SPORTSTER CARBURETED MODELS WITH A SINGLE 12-PIN CONNECTOR2101-0034 Module $304.952101-0075 USB interface 99.951022-0007 12V power adapter for bench programming

w/ PC interface cable (North American use w/ 120V AC only) 106.95

PART # DESCRIPTION SUG. RETAILFOR 99-03 TWIN CAM 88 CARBURETED MODELS WITH TWO 6-PIN CONNECTORSDS-242377 Module $304.952101-0075 USB interface 99.950807-0002 12V power adapter 106.95FOR 04-06 AMERICAN IRON HORSE MODELS2101-0202 Module 332.952101-0075 USB interface 99.950807-0002 12V power adapter 106.95

PLUG-IN IGNITION MODULES•Features two advance curve families that are adjustable to accommodate stock and modified engines•Selectable multi-spark mode for quick starting and smooth cruising•Five rotary switches for mode select, timing adjustments, advance slope and rpm limit (in 100 rpm steps)•Coil outputs protected against short circuits•Requires OEM coils with less than 1 ohm primary resistance and low-resistance spiral-core or carbon-core suppression-type plug wires•12V power adapters are used to power up the modules when removed from the bike (sold separately)•Optional USB interface and software available for programming (programs available on web site www.daytona-twintec.com/index.html) custom curves (USB cable must be purchased separately)

•Easy-to-follow instructions included•Made in the U.S.A.

NOTE: Will not work on fuel-injected models.

NOTE: Not legal for sale or use on pollution-controlled vehicles.

PART # DESCRIPTION SUG. RETAILDS-243068 7-pin adapter to 8-pin module $42.95DS-243069 8-pin adapter to 7-pin module 43.95

IGNITION MODULE ADAPTERS•Adapters allow the use of a seven-pin module (91-93) going to an eight-pin Deutsch (94-99) wiring harness or an eight-pin module going to a seven-pin harness

•Made in the U.S.A.

NOTE: Will not work for fuel-injected models.

2101-0033

2101-0022

2101-0055

2101-0063

2101-0071

2101-0034

2101-0075

0807-0002

DS-242377

DS-243069 DS-243068

599

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

FIREBALL® HI-4TC PERFORMANCE IGNITION MODULES•A choice of 10 advance curve families, all easily selected by a rotary switch – choose from factory stock to wildly modified for custom engines

•Installs in place of OEM module with plug-in installation•Generates up to nine sparks at idle and up to three sparks at 6000 rpm•PART #7806-1491 has a digitally set rev limiter that is adjustable from 1500 rpm to 9900 rpm in 100 rpm increments

•PART #2101-0073 has a digitally set rev limiter that is adjustable from 3000 rpm to 9900 rpm in 100 rpm increments

•True single fire – rear cylinder timing can be offset from -5° to +4°; initial timing is set from -5° to +4° and is easily adjustable•Works with stock security system•Bank angle sensor maintains stock functions•Customize advance curves and optimize ignition timing for radical head configurations, custom pipes, big-bore kits, cams and other performance modifications

•Optional software allows the ignition module to be programmed on or off the bike•Software has easy editing options and built-in diagnostics to allow for easy troubleshooting•Compatible with Pentium 75 and faster processors running Windows 95 or later operating systems•Ignition curves can also be custom-programmed with HI-4TC PowerLink programming software (sold separately)

600

IGNITION UPGRADE MODULE•Mounts directly in the space of the OEM ignition module for simple installation•Integrated high-output single-fire operation for outstanding engine performance•Smart Link software allows user to fully program front and rear spark timing and set rev limits•Includes four additional outputs: nitrous oxide activation control, “stage” rev limiter, shift light and an output for use with aftermarket tachs

•Improved starting and real-time diagnostic features•Rugged aluminum housing is weather- and vibration-resistant•Includes software, communication cable, module and comprehensive instructions

NOTE: Not for fuel-injected models.

PART # DESCRIPTIONSUG.

RETAIL2101-0073 For 04-06 Twin Cam and XL

models w/ carburetor $371.957806-1491 For 99-03 Twin Cam

models w/ carburetor 371.95

INTELLIGENT SPARK TECHNOLOGY (IST) IGNITION SYSTEM•The S&S system makes use of crank position sensor, cam position sensor if present, MAP sensor, cylinder head temperature sensor and an exclusive knock sensor that actually detects detonation or knock while the engine runs

•Knock sensor allows the ECU to automatically adjust ignition timing to eliminate knock whenever it occurs

•Optimizes power and fuel economy and reduces emissions•The Intelligent Spark Technology Ignition Module requires an installation kit that must be purchased separately

•Optional high-output coil also available: designed for the S&S Variable Fuel Injection System, the single-fire coil is actually two separate coils in a single package; coil impedance 3 ohm per coil (sold separately)

•Made in the U.S.A.

NOTE: Not for fuel-injected models.

NOTE: Not recommended for kick start applications unless a cam position sensor is used. Engines using crankshaft position sensors will be difficult to kick start.

NOTE: S&S IST ignition modules manufactured after 10-1-03 (serial number begins with “E” or higher letter) already contain software to support the Guardian Diagnostic System. These modules will work in all applications except 2004-’05. Modules manufactured after 10-1-05 (serial number begins with “G” or higher letter) are compatible with 04-05 models in addition to the other specified applications.

PART # DESCRIPTIONSUG.

RETAIL2101-0080 For 04-05 Twin Cam $199.9555-1012 For 99-03 Twin Cam 183.9555-10491 For 94 FLT models, 95-99

carbureted Big Twin, 95-97 XL, 95-96 Buell S2/S2T, 96-98 S1, 97 S1W, 97-98 S3/S3T, 97-01 M2 687.95

55-1050 For S&S Super Sidewinder Plus 309.952120-0083 For 04-06 XL 209.951 Pre-95 Big Twin models require minor wiring

harness modifications.

55-1012

2101-0079

MODULE

55-1049

PART # DESCRIPTIONSUG.

RETAIL55-1039 Cylinder head temp. sensor

for Evolution $43.9555-1014 Cylinder head temp. sensor for

Twin Cam and Super Sidewinder Plus (OEM 32446-99) 23.95

55-1015 Knock sensor kit 57.9555-1051 Crank position sensor 66.9555-1037 MAP sensor (OEM #32316-99) 47.95

REPLACEMENT PARTS FOR INSTALLATION KITS

7806-1491

2101-0073

GUARDIAN DIAGNOSTIC SYSTEM™•Offers engine builders and tuners some powerful new tools to use with the S&S IST ignition module

•Contains a software CD for PCs, a translator unit, and two cables that connect the translator to the COM port of your PC and to the data link on the motorcycle wiring harness

•Once connection between the computer and IST module is made, the software allows access to new functions and diagnostic data

•These functions allow you to, among other things: turn “on” the break-in “Rev” limit function to protect a new or rebuilt engine from over-revving during break-in; adjust the final rev limit; look at diagnostic test codes; look at live data for both cylinders while the engine is running (e.g., rpm, manifold absolute pressure, engine temperature, battery voltage, spark timing, etc.); look at a wide range of history information; and calibrate the speedometer in 04-06 models

•Includes software, translator unit and cables

PART # DESCRIPTIONSUG.

RETAIL2101-0131 Guardian

Diagnostic System kit $362.95

INSTALLATION KITS

PART # DESCRIPTION SUG. RETAIL2101-0079 S&S Intelligent Technology Ignition Module $403.95

2101-0083

55-1050

PART # DESCRIPTIONSUG.

RETAIL2101-0069 For 04-06 Big Twin

and XL models $243.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

2000-HDE PC-PROGRAMMABLE DIGITAL IGNITION MODULES•A plug-in upgrade to the electronic advance ignition found on late model Harleys, these ignitions are micro-computer controlled, generating extremely accurate control over the entire ignition process

•Allows riders to tailor the advance curve and rev limiter to the specific needs of their particular engine; four built-in advance curves cover the needs of stock to highly modified engines over a variety of operating conditions; four independent rev limiter choices from 6000 to 7500 rpm set the exact protection level needed

•PC programmability allows you to define a wide-open and part-throttle curve, rev limits, dead-cranking revs and rear cylinder offset

•PART #2101-0045 comes with 8-pin connectors; operates in single-fire or dual-fire modes•PART #2101-0046 comes with 8-pin connectors; operates in dual-fire mode only•PART #2101-0045 and 2101-0046 offer a quick curve which simulates a mechanical advancer for hot rod motors; option to use vacuum advance compensation via a VOES switch and retard mode, which allows selection of ignition retard of 5°, 7° or 10° upon activation of a retard input

•PART #2101-0044 is for use with a dual-fire ignition only; it simply plugs right into your 7-pin stock harness and mounts right in the original ignition mounting area

•PART #2101-0043 comes with a 7-pin connector; can be used with either one ignition coil firing both cylinders (dual fire), or with two ignition coils, one firing each cylinder (single-fire); no other ignition offers this flexibility

•A separate tach output wire allows clean tach operation during rev limiting and when in single-fire mode•A diagnostic LED indicator is included on the back of the control module to assist trouble shooting and static timing

IMPORTANT NOTE: On any electronic advance ignition such as the Dyna 2000-HD1 or the stock Harley ignition, you must use carbon fiber-type suppression spark plug wires to reduce radio frequency interference. Use of copper wires may cause malfunction of the ignition due to severe electrical noise generated at the spark plugs. The original wire supplied by Harley-Davidson should be okay.

NOTE: Not for fuel-injected models.

NOTE: HDE systems are not compatible with Dyna “S” systems. Use HD1/HD2 systems only.

EXTERNAL PLUG-IN IGNITION MODULES•Feature two advance curve families that are adjustable to accommodate stock and modified engines

•Selectable multi-spark mode for quick starting and smooth cruising

•Unit has four rotary switches for timing adjustments, single/dual ignition mode and rpm limit (100 rpm steps)

•Coil outputs protected against short circuits•Requires coils with a minimum of 3 ohms resistance and low resistance spiral-core-type plug wires

•Uses the tachometer wire for the PC-link and comes with a connector•Optional USB interface and software available for programming custom curves (programs available on web site www.daytona-twintec.com/index.html)

•12V power adapter is used to power up the ignition system when removed from the bike and installing new maps (sold separately)

•Made in the U.S.A.

NOTE: Not legal for sale or use on pollution-controlled vehicles.

HI-4E SINGLE-/DUAL-FIRE MULTI-SPARK IGNITION MODULES•Low-profile black anodized billet aluminum housing•Replace OEM module•Feature selectable multi-spark mode, which generates up to nine sparks at idle and three sparks up to 6000 rpm

•Can be used with any single- or dual-fire coil with 2.5-ohm or greater resistance•Digitally set rev limiter adjusts from 500 to 9900 rpm in 100-rpm increments•A choice of two advance curves: stock with VOS or modified without VOS•Advance slope of either curve can be adjusted in 10 steps via a rotary switch•Rear cylinder timing can be set digitally from -5° to +4°•Operating voltage of 4-18V with reverse polarity protection•70-79 model must use wire adapter PART #DS-242344 and OEM pick-up #32402-83

NOTE: Not for fuel-injected models.

2101-0045 2101-0043

DS-242375 2101-0075

2101-0130

DS-242335

DS-242336

PART # DESCRIPTION SUG. RETAIL2101-0045 L94-98 FLT/FLHT, 96-99 FXST/FLST, 96-98 FXD/FXDWG and 94-97 XL single- or dual-fire system (w/ 8-pin) $249.952101-0046 L94-98 FLT/FLHT, 96-99 FXST/FLST, 96-98 FXD/FXDWG and 94-97 XL dual-fire system (w/ 8-pin) 200.952101-0043 91-E94 FLT/FLHT, 91-95 FXST/FLST, 91-95 FXD/FXDWG and 90-93 XL single- or dual-fire digital system (w/ 7-pin) 249.952101-0044 91-E94 FLT/FLHT, 91-95 FXST/FLST, 91-95 FXD/FXDWG and 90-93 XL dual-fire digital system (w/ 7-pin) 199.951009001 Dyna 2000 electrical harness extension (84-90 Big Twin models) 38.951009002 8-pin to 7-pin harness adapter (94-up Evolution models) 69.95

PART # DESCRIPTION SUG. RETAILDS-242374 91-E94 FLT/FLHT, 91-95 FXST/FLST, 91-95 FXD/FXDWG and 90-93 XL w/ 7-pin Cannon plug $304.95DS-242375 L94-98 FLT/FLHT, 96-99 FXST/FLST, 96-98 FXD/FXDWG and 94-97 XL w/ 8-pin Deutsch plug 304.952101-0075 USB interface 99.952101-0130 12V power supply (110/240 VAC multi-plug international compatibility) 69.95

PART # DESCRIPTION SUG. RETAILDS-242335 7-pin ignition module for 91-E94 FLT/FLHT, 91-95 FXST/FLST, 91-95 FXD/FXDWG and 90-93 XL $337.95DS-242336 8-pin ignition module for L94-98 FLT/FLHT, 96-99 FXST/FLST, 96-98 FXD/FXDWG and 94-97 XL 337.95

601

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

602

EXTERNAL MODULE IGNITION KITS•Kit includes ignition module, single-fire coil, 8.5mm spark plug wires and instructions

•Two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications

•Unit has four rotary switches for adjusting timing, single/dual fire, rpm limit and two LED indicator lights

•Digitally set rpm limit (in 100 rpm steps); selectable single- or dual-fire mode

•Selectable multi-spark mode for quick starting and smooth cruising•Coil outputs protected against short circuits•Optional USB interface and software available (programs available on web site http://www.daytona-twintec.com/index.html) for programming custom curves (PC-link cable must be purchased separately)

•Kit uses the tachometer wire for the PC-link and comes with a connector

NOTE: Not legal for sale or use on pollution-controlled vehicles.

FIREBALL HI-4E SINGLE-FIRE IGNITION KITS•Kits include an HI-4E ignition module, a single-fire coil and plug wires

•Module features a selectable multi-spark mode with 10 advance curves and a digitally set rev limiter that adjusts from 500 to 9000 rpm

•Single-fire 3-ohm coil fits under the stock coil cover•8.5mm plug wires have reactive core design with black silicone insulation

IGNITION KITS•Kit for 99-03 Twin Cam 88 carbureted models includes ignition module (PART #DS-242377), spark plug wires and single fire coil

•Module features two advance curve families with adjustable advance curves to accommodate stock and modified engines

•Unit has five rotary switches for timing adjustments, advanced slope and rpm limits

•Digitally set rpm limiter (in 100 rpm steps)•Selectable multi-spark mode for quick starting and smooth cruising

•Coil outputs protected against short circuits•Optional USB interface and software available for programming custom curves (programs available at http://www.daytona-twintec.com/index.html)

•Kit for 04-06 Twin Cam and Sportster models includes a 12-pin ignition module, software, PC link cable, coil and spark plug wires

NOTE: Not legal for sale or use on pollution-controlled vehicles.

PC-PROGRAMMABLE SINGLE-FIRE IGNITION AND COIL KITS•Kit includes Dyna 2000 ignition module and Dyna Twin Fire coils

•PC programmability allows you to define a wide-open and part-throttle curve, rev limits, dead cranking revs and rear cylinder offset

•Makes stocking and buying easy by combining parts matched to a specific bike•Dyna 2000 ignition has expanded advance curve functionality, a special retard mode for turbo-charged and nitrous bikes, selection between four advance curves, a quick curve which simulates a mechanical advancer for hot rod engines and four independent rev limiter choices from 6000 to 7500 rpm

•Dyna Twin Fire coils incorporate two performance coils into a single package that is only slightly larger than the stock coil and mounts easily to the stock mounting bracket; delivers spark voltage in excess of 30,000V with fast rise times and high energy

2101-0047

2102-0022

2101-0032

2101-0075

DS-242449 DS-242450

7806-1562

2101-0075

PART # DESCRIPTION SUG. RETAIL2101-0047 For 91-95 Softail/91-95 Dyna, 90-93 XL; 91-E94 FLT; 84-94 FXR (7-pin) $399.952101-0048 For 96-99 Softail, 96-98 Dyna, 94-97 XL; L94-98 FLT (8-pin) 399.95

PART # DESCRIPTION SUG. RETAIL2102-0022 For 04-06 Twin Cam and XL carbureted models w/ one 12-pin connector $461.952101-0032 For 99-03 Twin Cam carbureted models w/ two 6-pin connectors (except 01 FLHT models) 402.952101-0075 USB interface 99.95

PART # DESCRIPTION SUG. RETAILDS-242449 8-pin ignition kit for L94-98 FLT/FLHT, 96-99 FXST/FLST, 96-98 FXD/FXDWG and 94-97 XL models $524.95DS-242450 7-pin ignition kit for 91-E94 FLT/FLHT, 91-95 FXST/FLST, 91-95 FXD/FXDWG, and 90-93 XL models 524.95

PART # DESCRIPTION SUG. RETAILFOR L94-98 FLT/FLHT, 96-99 FXST/FLST, 96-98 FXD/FXDWG AND 94-97 XL MODELS7806-1562 External module ignition kit w/ 8-pin Deutsch plug $402.99FOR 91-E94 FLT/FLHT, 91-95 FXST/FLST, 91-95 FXD/FXDWG AND 90-93 XL MODELS7806-1561 External module ignition kit w/ 7-pin Cannon plug 402.99ACCESSORIES2101-0075 USB interface 99.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

2000I PC PROGRAMMABLE ELECTRONIC IGNITION•Completely self-contained so entire unit hides under the cam cover for a clean look on custom bikes

•Single-fire operation down to zero rpm for easier cranking and kicking•Will operate in all combinations of single-fire or dual-fire with single-plug or dual-plug heads

•Ten advance curves cover a broad range of engine builds and riding styles•Engine over-rev protection, adjustable from 6000 to 7500 rpm•Adjustable timing retard for nitrous and turbo applications•VOES indicator lets you monitor VOES switch at a glance•Built-in tach driver can be used to activate shift lights, auto-shifters and other accessories

•Easy static timing with built-in timing indicator•Intelligent over-current/short-circuit protection•Active dwell control•Over-voltage protected against momentary spikes•Data recording includes total engine hours, time wide-open throttle, longest time operating at wide-open throttle, max rpm, seconds near rev limit and number of engine starts

•PC programmability makes possible an eight-point, fully definable, wide-open throttle curve and a fully definable part throttle curve, rev limit programmable in 50 rpm steps, programmable dead-cranking revs 0-5, rear cylinder offset, total of +/- 10°, programmable rev limiter, security lock out (pin # activated), single or dual fire

•Programming and downloading data and graphs from module requires proper programming kit (includes CD, cables and instructions)•Pig-tail connector enables the user to connect the ignition to a PC to either download recorded info from the ignition or program their own power curves, rev limits, dead revs or rear cylinder off-set timing; connector remains on bike

NOTE: Programming kit is not necessary to use all selectable functions of the current ignition.

TWIN CAM STAND-ALONE IGNITION SYSTEM•Designed for use in custom applications where a Twin Cam motor and crank sensor are used•Complete ignition system includes module, coil, wires, Smart Link software, communication cable and instructions (no Harley factory harness required)

•Consolidates ignition components into a small, easy-to-mount package•Integrated high-output single-fire operation•Fully programmable spark timing and rev-limit setting•Real-time diagnostic features aid in troubleshooting and tuning•Uses factory crank trigger for improved starting and performance•Rugged billet aluminum housing is weather- and vibration-resistant•Custom mounting with 1/4”-20 bolts, 2” apart

PART # DESCRIPTION SUG. RETAIL2101-0070 For carbureted 01-06 Twin Cam models $313.95

PART # DESCRIPTION SUG. RETAILFOR 70-99 CARBURETED MODELS; 82 AND EARLIER WILL REQUIRE A SENSOR CUP ADDITION, OEM #32402-83 (PART #2101-0025) (NOT FOR TWIN CAM, 1200S)2101-0027 Module only $249.952101-0028 Single-plug/single-fire kit (includes module and pair of DC3-1 coils) 399.952101-0029 Dual-plug/single-fire kit (includes module and pair of DC1-1 coils) 399.952101-0031 Single-plug/single-fire kit (includes module and DC6-5 Twin Fire II miniature coil) 399.952101-0012 Programming kit for 2101-0027, 2101-0028, 2101-0029 , 2101-0030 and 2101-0031 99.95

PART # DESCRIPTION SUG. RETAILDS-325770 For 70-99 Evolution Big Twin and 71-03 XL (except 1200S) $470.95

HI-4 SINGLE-FIRE IGNITION KIT•This complete kit offers aggressive ignition curves and dyno-proven power gains

•Adjustable advance allows timing based on engine modifications, operating conditions and fuel

•Built-in rev limiter adjusts from 4000 to 8000 rpm•Utilizes stock VOES unit when applicable•Single-fire coils are an innovative design with 3.0 ohms (fits under most stock coil covers)

•8.5mm spark plug wires feature spiral-core design with universal 90° plug caps

•Kit comes complete with hardware•System utilizes an 84-98 OEM pick-up rotor; on pre-84 models you will need to purchase pick-up rotor PART #2101-0025

•Made in the U.S.A.

NOTE: If tach is inoperative after installation, you may require a Crane tach adapter DS-242304.

PART # DESCRIPTION SUG. RETAILFOR 70-99 BIG TWIN, 71-03 XL (EXCEPT TWIN CAM, 1200S)DSK61 Dual-fire ignition kit $189.95DSK62 Single-fire ignition kit 279.95

PART # DESCRIPTION SUG. RETAIL7806-1559 For 70-99 Big Twin/71-97 XL $378.957806-1560 For 98-03 XL (except 1200S) 402.952101-0075 USB interface kit 99.95

IGNITION KITS•Kit includes ignition system, 8.5mm spark plug wires, single-fire coil and instructions

•Ignition system has two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications

•Four rotary switches for adjusting timing and single/dual fire rpm limit

•Digitally set rpm limit (in 100 rpm steps), selectable single- or dual-fire mode

•Selectable multi-spark mode for quick starting and smooth cruising

•Coil outputs protected against short curcuits•Optional USB interface kit and software (programs available on web site http://www.daytona-twintec.com/index.html) available for programming custom curves

•Requires the use of an OEM timing rotor (OEM #32402-83 or PART #2101-0025)

•Uses the tachometer wire for the USB interface and comes with a connector

NOTE: Not legal for sale or use on pollution-controlled vehicles.

IGNITION AND COIL KITS•Complete electronic ignition systems built with the latest state-of-the-art engineering

•The same ignition used by top drag and road racers to set records and bring home victories over the past decade

•The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original advance unit, so the factory advance curve is maintained

•Coils provide spark voltages in excess of 30,000V and spark energies second to none•The DSK61 Dyna S and coil system includes a DC7-1 high energy coil•The DSK62 Dyna S and coil system is designed for single-fire applications; includes two DC10-1 Dyna coils

NOTE: Later models will require the use of a mechanical advance unit.

2101-0027

2101-0012

2101-0028

7806-1559

2101-0075

DSK61 DSK62

603

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

604

PART # DESCRIPTION SUG. RETAIL7805-1039 For 70-99 Big Twin and 71-03 XL

(except Twin Cam, 1200S); use w/ OEM rotor #32402-83 (PART #2101-0025) $488.95

SINGLE-FIRE “SUPER SYSTEM”•Kit features a programmable ignition module with adjustable rev limiter•Single-fire coil (3.0 ohms)•Accel U-groove spark plugs with black 8.8mm plug wires

PART # DESCRIPTION SUG. RETAILDS6-1 For 70-79 Harleys (80-99 H-D requires advance unit) $124.95DS-242298 Advance unit w/ bolt (ea.) 31.95

FITMENT APPLICATION PART #SUG.

RETAILDUAL-FIRE IGNITIONS (SEE DS6-1)W/ single plug heads Race only, 3 ohm (green) DC6-1 (ea.) $79.95W/ single plug heads Street, 5 ohm (black) DC7-1 (ea.) 79.95W/ dual plug heads Race/Street, 1.5 ohm (brown) DC2-1 (pr.) 154.95SINGLE-FIRE IGNITIONS (SEE DS6-2)W/ single plug heads Street, 5 ohm (black) DC10-1 (pr.) 154.95W/ single plug heads Race only, 3 ohm (green) DC3-1 (pr.) 154.95

FITMENT APPLICATION PART #SUG.

RETAILSINGLE-FIRE IGNITIONS (SEE DS6-2) (CONT)W/ dual plug heads Race only, 3 ohm (green) DC1-1 (pr.) $154.95W/ dual plug heads Street, 5 ohm (black) DC8-1 (pr.) 154.95W/ dual plug heads Race only, requires two coils,

3 ohm (green) DC6-1 (ea.) 79.95W/ dual plug heads Street, requires two coils,

5 ohm (black) DC7-1 (ea.) 79.95

ELECTRONIC IGNITION SYSTEM•Perfect ignition timing once and for all•Self-contained ignition system features Hall Effect magnetic sensors, which are not sensitive to rpm changes or affected by dirt and oil

•Improves overall performance by changing less than 3 degrees from 0 to 12000 rpm, extends plug life, eliminates the use of points and condensers; can be easily installed

•Used and endorsed by many championship racers

NOTE: Not for Twin Cam.

NOTE: Not recommended for use with OEM coils.

SINGLE-FIRE ELECTRONIC IGNITION SYSTEM•All the features of the famous Dyna “S”, plus the special feature of firing the front and rear cylinders independent of each other, allowing a much more accurate timing of each cylinder

•The stock ignition system fires both cylinders at the same time, which works fine for the front cylinder but the rear receives the “wasted” spark when the cylinder has started its intake stroke; this can result in harder starting, increased engine vibration, backfire and raw fuel being spit back into the carb, all creating a power loss

•Dyno and top-speed testing have shown a dramatic improvement in power in all areas; bikes with hotter cams show the greatest improvement

•If you truly want to get the most out of your stock, slightly modified or all-out customized Harley-Davidson, you need a Dyna “S” single-fire ignition system

NOTE: Not recommended for use with OEM coils.

NOTE: On 80-up Harley-Davidsons, an advance weight mechanism is required.

NOTE: This unit must be used with special Dyna coils; see coil chart for correct coils.

NOTE: Tach adapter is required when using an electric tach.

NOTE: Not for use on Twin Cam 88 models.

PART # DESCRIPTION SUG. RETAILDS6-2 For 70-99 Big Twin/XL using a mechanical advance assembly $149.95DS-242298 Advance unit w/ bolt (ea.) 31.95D-101 Tach adapter 20.95

PROFIRE™ SOFTWARE•Used to program the V-Thunder Controller PART #s DS-242443, DS-242444 and Hyperfyre™ DS-242441 ignition modules

•ProFire requires Windows® 3.x/95/98/NT-compatible program for changing and modifying the ignition map and other programs residing in the Troller and Hyperfyre ignition computer

•To use ProFire software, you will need a laptop or desktop PC, Windows 95 or newer, RS232 serial port, a minimum of 4 megs of RAM and a 3.5” disk drive (minimum recommended CPU speed: 25 Mhz)

•With the use of a 7-pin or 8-pin power adapter cord (must be purchased separately) you can remove the Controller or Hyperfyre module from the bike and connect it directly to the computer (requires a 9V battery)

•Settings that can be changed with the ProFire software are: basic module settings, ignition delay, start mode exit, start mode enter, cam sensor sinc, cam sensor offset, rev limit, aux rev limit, rev limit rate, nitrous delay, nitrous arming rpm, ignition mode, switch lockout, serial port setting and collars

•Software kit includes one 3.5” floppy disk, one 7’ interface cable and one programming manual

•Made in the U.S.A.

APPLICATION CHART FOR DYNA COILS WHEN USING DYNA “S” IGNITION SYSTEMS

DC2-1

DC3-1

DS6-1

DS6-2

DS-242442

DS-242445

DC10-1

PART # DESCRIPTION SUG. RETAILDS-242442 ProFire software $82.95DS-242445 Power adapter cord (7-pin) 16.95DS-242446 Power adapter cord (8-pin) 22.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

605

PART # DESCRIPTIONSUG.

RETAILDS-242372 Model 1005 internal ignition system for 84-99

Evolution Big Twin, 70-84 Shovelhead and 71-97 XL $276.95DS-242373 Model 1005S internal ignition system

for 98-03 XL (except 1200S) 304.95

PART # DESCRIPTIONSUG.

RETAIL2101-0075 USB interface $99.952101-0130 12V power supply (110/240 VAC multi-plug

international compatibility) 69.95

INTERNAL IGNITION SYSTEMS•Features two advance curve families that are adjustable to accommodate stock and modified engines•Selectable multi-spark mode for quick starting and smooth cruising•Four rotary switches for timing adjustments, single/dual ignition mode and rpm limit (100-rpm steps)•Coil outputs protected against short circuits•Requires coils with a minimum of 3 ohms resistance and low resistance spiral-core-type plug wires•Requires timing rotor OEM #32402-83 or PART #2101-0025•Uses the tachometer wire for the PC link and comes with a connector•Optional USB interface and software available for programming custom curves (programs available on web site www.daytona-twintec.com/index.html)

NOTE: Not legal for sale or use on pollution-controlled vehicles.

PART # DESCRIPTIONSUG.

RETAILFOR 70-99 BIG TWIN, 71-03 XL (EXCEPT TWIN CAM, XL1200S)DS-242313 Dual-fire ignition (4° advance capability) $258.95DS-242312 Single-fire ignition (not legal for pollution-controlled

vehicles); capable of adjusting the rear cylinder timing +/-5° (9000 rpm limit) 288.95

PART # DESCRIPTIONSUG.

RETAILFOR 70-99 BIG TWIN, 71-03 XL (EXCEPT TWIN CAM, XL1200S) (CONT)DS-242314 Single-fire ignition; California legal and has no rear

cylinder timing adjustment (CARB E.O. #D-225-43) $288.952101-0025 Ignition rotor for all 84-99 Evolution engines;

repl. OEM #32402-83 (except 1200S) 6.95

HI-4 IGNITION SYSTEMS•More power than stock systems, aggressive ignition curves and dyno-proven power gains•Immediately fires the first cylinder on kickers and reduces “kickback” and strain on electric start systems•Electronically adjustable advance allows timing based on engine modifications, operating conditions and gasoline; also utilizes stock VOES unit when applicable

•Sealed electronic protection circuits protect from over-temperature, short circuits, coil failure and wiring errors•Fully adjustable rev limiter adjusts from 4000 to 8000 rpm; tach output accurate even at rev limits•Timing LED for static timing and diagnostic information•Can be used with single- or dual-plug heads (use suppression or spiral-core wires)•Spiral-core wires are recommended for maximum performance (do not use solid copper spark plug wires; they may cause interference with ignition system and accessories)

•Entire unit fits under the point cover on 80” Evolution, Shovelhead Big Twin and Sportster models•Systems utilize 84-99 80” Evolution OEM pick-up rotor; on pre-84 models you will need to purchase OEM #32402-83 pick-up rotor or PART #2101-0025•Coils must have at least a 2 ohm primary resistance•Ignition systems, coils and plug wires sold separately•Ignition rotor includes bolt and lock washer•Made in the U.S.A.

NOTE: Single-fire systems must use single-fire coils with at least 2 ohms of resistance.

NOTE: If tach is inoperative after installation of the HI-4, you may require a tach adapter. The HI-4 tach output is compatible with ground-sensing tachs (including most OEM and aftermarket tachs), but some tachs require a high-voltage trigger pulse. In this case, install Crane tach adapter DS-242304.

DS-242372

DS-242373

2101-0075

2101-0130

DS-242313 DS-242312

2101-0025

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

606

DUAL- AND SINGLE-FIRE ELECTRONIC IGNITION SYSTEMS•Superior dependability: super-high-intensity electronic ignition systems offer better timing accuracy because of tighter tolerances and the proper use and placement of more magnets

•Single-fire model fires each cylinder individually; standard dual-fire model fires both cylinders at the same time (as does the OEM unit)

•Crane recommends using coils with approximately 3 ohms for maximum output

•Mechanical advance unit must be purchased separately

PART # DESCRIPTION SUG. RETAILFOR 70-99 BIG TWIN, 71-03 XL (EXCEPT TWIN CAM AND XL1200S)DS-242302 Dual-fire ignition (ea.) $197.95DS-242303 Single-fire ignition (ea.) 271.95DS-242309 Repl. rotor only for DS-242302

(dual fire w/ four magnets) 40.95DS-242310 Repl. rotor only for DS-242303

(single fire w/ two magnets) 31.95

PART # DESCRIPTION SUG. RETAILFOR 70-99 BIG TWIN, 71-03 XL (EXCEPT TWIN CAM)DS-242319 For stock or slightly modified engines

(works w/ VOES) $269.95DS-242333 For high-compression (10:1) engines

(works w/ VOES) 269.95DS-242371 For stock or slightly modified engines

w/ kick starter (works w/ VOES) 269.95TACH ADAPTERDS-242332 Tachometer adapter for single-fire

Compu-Fire ignitions 33.95

ELITE 1 IGNITION MODULES•All electronics mounted in the nose cone (timing cover)

•Feature selectable advance curves (eight advance curves in either dual- or single-fire operation)

•Adjustable rpm limiter (eight rpm limits)•Dual-range VOES operation•Accu-Ray light for easy installation and check system•Must use tach adapter PART #DS-242332 with single-fire systems•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-242339 For 70-99 Big Twin

(except Twin Cam) and 71-03 XL (except 1200S) $269.95

ELITE 1 IGNITION MODULE•Super Sport Race variable-advance ignition module with variable retard for race engines with NOS system or turbocharger (without VOES)

•Module is completely contained in the nose cone (gear cover)

•Allows you to select advance curves; eight advance curves in either dual- or single-fire operation

•Adjustable rpm limiter (eight limits)•Dual-range VOES operation (except PART #DS-242339)

•Accu-Ray light for easy installation and system check

•Must use tach adapter PART #DS-242332 with single-fire systems

•Made in the U.S.A.PART # DESCRIPTION SUG. RETAILORIGINAL COMPU-FIRE MODULE KITS ONLYDS-242324 Ignition module kit; dual-fire; two plug $115.95DS-242325 Ignition module kit; single-fire; two plug 136.95TACH ADAPTERDS-242332 Tachometer adapter for single-fire Compu-Fire ignitions 33.95

ORIGINAL COMPU-FIREIGNITION MODULES•Built-in Accu-Ray timing light, correct dwell times and no external ignition module because electronics mount entirely inside ignition housing

•Rev limiter eliminated•Must use tach adapter PART #DS-242332 with single-fire modules

•Made in the U.S.A.

NOTE: Requires the use of a mechanical advance unit.

PART # DESCRIPTION SUG. RETAILDRL400HD Two-stage rev limiter $199.95

TWO-STAGE REV LIMITER•Precisely controls over-revving and launch rpm

•Designed for the odd firing angle of Harley V-twins

•Over-rev limit guarantees against damage due to missed shifts or drivetrain breakage; adjustable from 5500 to 9250 rpm

•Launch limit gives maximum off-the-line performance; adjusts between 2500 and 6250 rpm in 250 rpm increments

•Spares unnecessary poundings of expensive engine components PART # DESCRIPTION SUG. RETAILDSMS-2 Shift minder system w/ shift light,

two-cylinder (4000 -11875 rpm) $199.95

SHIFT MINDER KIT•Designed to provide optimum shifting to match your style

•Triggering accuracy to better than 1%•Adjustable to switch at any of 64 different rpm settings; 125 rpm increment between each setting

•Requires no additional parts for rpm switch point selection

DS-242324

DS-242325

DS-242332

DS-242303 DS-242309

DS-242319 DS-242332

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

607

HIGH-PERFORMANCEIGNITION ADVANCE UNIT•Advance mechanism is smoother, more accurate and more reliable than any OEM unit

•Stainless steel shaft, plate and washers

•Heat-treated advance weights coated with high-tech, low-friction polymers

•Hardened-steel pins hold the weights in place, which are in turn spring loaded, using high-quality phosphate-coated spring wire

•Springs wound to exacting specifications, and cadmium-plated to resist corrosion

SINGLE- ORDUAL-FIRE IGNITIONMODULE•For use in single- or dual-fire applications with proper coil

•Features adjustable rev limiter and 15% advance curves

•Uses stock rotor cup OEM #32402-83 or PART #2101-0025

PART # DESCRIPTION SUG. RETAIL7805-1040 For 70-99 Big Twin,

71-03 XL (exc. Twin Cam, 1200s models) $347.95

BREAKERLESS DUAL-FIRE IGNITION KIT•Eliminates the need for points and condenser

•Unilite module has no moving parts and consists of an integrated photo coupler, a signal processor and a power switch

•Recommended coils are 2.0 - 3.0 ohms for racing or 3.0 - 4.0 ohms for street

NOTE: Requires the use of an advance unit and spiral-core or carbon core plug wires.

PART # DESCRIPTION SUG. RETAILDS-243085 For 70-99 Big Twin models (except Twin Cam) $147.95

IGNITION SENSOR ASSEMBLIES•Each assembly includesa pickup, mounting plate and wires with connectors

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0807-3017 For 80-93 FLT, 84-95 FXST/FLST,

80-94 FXR and 80-94 XL; repl. OEM #32400-80A $36.95

0807-3018 For 91-95 FXD; repl. OEM #32404-90 36.95

0807-3019 For 94-95 FLT, 95-97 XL and 98-03 XL1200S; repl. OEM #32400-94 36.95

PART # DESCRIPTION SUG. RETAIL2105-0051 For 70-99 80” Big Twin and 71-03 XL that

utilize a mechanical advance $61.95

PART # DESCRIPTION SUG. RETAILFOR 70-99 BIG TWIN AND 71-03 XL MODELS(EXCEPT SINGLE FIRE IGNITION)DS-242299 Advance unit assembly, complete $40.95DS-242298 Advance unit and bolt only 31.95DS-242301 Breaker plate assembly with points, condenser 7.95

ADVANCE UNIT ASSEMBLY•Includes all the items shown; breaker plate assembly and the advance unit with bolt can be purchased separately

ADVANCE UNIT ASSEMBLYFOR DISTRIBUTOR IGNITIONS•A complete advance unit assembly for Drag Specialties’ chrome distributor, DS-242400/399

•Also replaces the advance unit assembly found in many other aftermarket distributors

•Assembly includes all items shown

PART # DESCRIPTION SUG. RETAILDS-242291 Advance unit assembly for distributor ignitions $42.95

REPLACEMENT TIMING BOLT•Replacement advance unit timing bolt

PART # DESCRIPTION SUG. RETAILDS-196035 For all 70-99 Big Twin, 70-03 XL models $1.95

DS-242299

0807-3017

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

608

PART # DESCRIPTION SUG. RETAILKITSDS-242026 For 70-E78 Big Twin, 71-E78 XL (L78-99 80” and XL models

if converted to points) $12.95DS-242027 For 48-69 Big Twin, 57-70 XL 12.95DS-242028 For 58-69 XL w/ magneto 17.95INDIVIDUAL COMPONENTSDS-242407 Points for 70-E78 Big Twin, 71-E78 XL; repl. OEM #32661-70

(L78-99 models if converted to points) 7.95DS-242406 Points for 48-69 Big Twin, 57-70 XL; repl. OEM #30605-48 6.95DS-242408 Points for 58-69 XLCH (magneto); repl. OEM #29533-55A 12.95DS-242410 Condenser for 30-E78 Big Twin, 57-E78 XL; repl. OEM #32726-30A

(L78-99 models if converted to points) 3.95DS-242409 Condenser for 58-69 XLCH (magneto); repl. OEM #29534-55A 7.95

POINTS AND CONDENSERS•Contact sets feature a metal spring designed to resist metal fatigue and a follower of space-age material to ensure longer life

•Condenser is sealed to help prevent breakdown due to moisture•Meets or exceeds OEM specs•Sold in kits or as individual components•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 70-E78 FX/FL AND 71-E78 XLDS-242403 Points and

condenser kit $20.95DS-242404 Points only;

repl. OEM #32661-70 14.95DS-242405 Condenser only;

repl. OEM #32726-30A 7.95

BLUE STREAK™ HIGH-PERFORMANCE POINTS AND CONDENSER•Heavy-duty construction•Superior to OEM points and condenser•Oversized ventilated contacts and copper shunts

•Available as a kit or as individual components•Made in the U.S.A.

PART # DESCRIPTIONSUG.

RETAIL2101-0081 Billet electronic timer $424.950950-0083 Gear kit (reverse

counterclockwise rotation) 369.95

GENERATOR-STYLE ELECTRONIC TIMER•Billet electronic timer fits S&S and stock generator-style cases and allows the use of S&S Super Stock or other late-style electronic ignition systems

•Requires reverse timing gears for use in generator-style engines (sold separately)

PART # DESCRIPTION SUG. RETAIL2130-0019 For 36-69 Big Twins $476.952130-0020 For 52-70 XL 476.95

ELECTRONIC IGNITION DISTRIBUTORS•Lightweight billet aluminum construction•12V unilite ignition with fully adjustable advance allows faster and easier starting

•Feature advance curves, rev-limiting and high-spark output

•Can be set to run either in a single-or dual-fire mode

•No head removal when using stock headsPART # DESCRIPTION SUG. RETAILDS-243086 For 36-69 Big Twin $378.95DS-243087 For 52-70 XL 386.95

ELECTRONIC IGNITION DISTRIBUTOR•Lightweight billet aluminum construction

•12V unilite ignition with fully adjustable advance allows faster and easier starting

•No head removal when using stock heads

PART # DESCRIPTIONSUG.

RETAIL0807-2610 For 66-69

Big Twin models $10.95

DISTRIBUTOR HOLD DOWN•Single-bolt style with a chrome finish

•Also works with most aftermarket distributors

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-242296 Large wire hold-down for

electronic-type ignitions $7.95

IGNITION WIRE HOLD-DOWN•Trick ignition wire hold-down neatly secures the ignition wire to the cam cover and adds a tasteful finishing touch to a custom bike

•Features hand-machined looks; but is actually die-cast aluminum and chrome-plated

•Accepts a socket-head, comes wide version for the electronic models

•Can be used for any other custom hold-down you can think of

PART # DESCRIPTIONSUG.

RETAILFOR 70-99 FX, FL MODELS (EXCEPT TWIN CAM)DS-242293 Long ignition circuit breaker

studs 70-79; repl. OEM #s 32608-72 and 32601-78 $11.95

DS-242292 Short ignition circuit breaker studs for 80-99 FX, FL (except Twin Cam 88); repl. OEM #s 32601-80, 32606-82 12.95

IGNITION CIRCUIT BREAKER STUDS•Replacement studs with screws and washers•Sold in packs of 10

PART # DESCRIPTION SUG. RETAILDS-196040 For all Big Twin and XL models $4.95

CLEAR TIMING HOLE PLUG•Plastic plug lets you locate the timing mark without getting an eye full of oil

•Easy installation and removal•Size is 5/8”-18

PART # DESCRIPTION SUG. RETAILDS-242294 Screws (pr.) $22.95

STAINLESS STEEL SENSOR PLATE SCREWS•Made from 17-4 stainless steel•Strongest screws on the market today•The body is .700” long; replaces OEM #32606-82•Made in the U.S.A.

DS-242026 DS-242027 DS-242028

2101-0081

0950-0083 2130-0019

2130-0020

DS-243086

DS-243087

DS-242293

DS-242403

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

HIGH-PERFORMANCE STARTER MOTORS•100% new – not remanufactured!•Special pinion shaft threads and extended jackshaft bolt allow for a wider range of applications•Starters feature oversize clutch rollers, cold headed steel idler gears and armature hairpins that are resistance-fused to the armature•All 90-06 starters are supplied with 10/32 threaded output shafts•1.4kW is a new replacement unit for stock and slightly modified engines; generates more power than the OEM stock starter•1.6kW is a new replacement unit with oversized copper wound field coils that provide starting power for big-inch engines while placing less stress on the battery; measures approximately 1/2” longer in the field case than a 1.4kW starter

•1.7kW is a new replacement unit for highly modified engines in touring bikes, featuring a permanent magnet motor coupled to the OEM-style offset gear reduction case making a drop-in solution to hard-starting touring bikes (due to the high in rush current of a permanent-magnet motor a minimum 300 CCA battery is recommended with 4-gauge battery cables)

•Available in black or chrome finish•Made in the U.S.A. and Canada

NOTE: OEM Hitachi starters for pre-89 Big Twin measure 51/4”. OEM Prestolite starters for pre-89 Big Twin measure 6”.

NOTE: For optimum performance, use with Drag Specialties battery and battery cables.

PART # DESCRIPTION SUG. RETAILFOR 07-09 BIG TWIN AND 06 DYNA GLIDE2110-0247 1.4kW black; repl. OEM #31619-06A $319.952110-0248 1.4kW chrome; repl. OEM #31621-06A 385.95FOR 90-06 BIG TWIN (EXCEPT 06 DYNA GLIDE) (REPL. OEM #S 31553-90 AND 31553-94)80-1001 1.4kW black 254.9580-1002 1.4kW chrome 344.952110-0074 1.6kW black 404.952110-0075 1.6kW chrome 429.952110-0168 1.7kW black 352.9580-1004 1.7kW chrome 399.95

PART # DESCRIPTION SUG. RETAILFOR PRE-89 BIG TWIN80-10051 1.4kW Hitachi black $246.9580-10061 1.4kW Hitachi chrome 317.9580-10071 1.4kW Prestolite black 246.9580-10081 1.4kW Prestolite chrome 317.95FOR 81-09 SPORTSTER80-1009 1.4kW black 297.9580-1010 1.4kW chrome 406.951 Year 2000 starter motor design is more compact than the original and

does not require the rear bracket. Because of the higher output, 4-gauge cables are recommended for this starter.

2110-0074

2110-0075

80-1005 80-1006

80-100980-1010

PART # DESCRIPTION SUG. RETAILFOR 66-82 FL, 67-80 XL EQUIPPED WITH PRESTOLITE STARTERS; REPL. OEM #31458-662110-0224 Chrome $179.952110-0223 Black 159.95FOR 74-86 BIG TWIN, 74-E76 XLH EQUIPPED WITH HITACHI STARTERS; REPL. OEM #31570-732110-0226 Chrome 179.952110-0225 Black 159.95

HIGH TORQUE STARTERS•Starters feature 15% more power and torque than OEM units•Manufactured using heavy-duty armature commutators, large drive-end bearings and needle bearings in the com-end caps

2110-0224 2110-0223

2110-0226 2110-0225

REPLACEMENT COMPONENTS FOR PRESTOLITE STARTERS•Replacement brushes and armature available; all parts are interchangeable with OEM

NOTE: For OEM equivalent starters. Will not fit high-torque starters.

PART # DESCRIPTION SUG. RETAILFOR 66-82 FL AND 67-80 XL EQUIPPED WITH PRESTOLITE STARTERSDS-195143 Armature; repl. OEM #31542-66 (ea.) $107.95DS-195142 Brushes; repl. OEM #31541-66 (set) 17.9540115 High-torque Accel starter field 12V coils 55.95

DS-195143 40115

PART # DESCRIPTION SUG. RETAILFOR 74-88 BIG TWIN AND 74-E76 XLH MODELS EQUIPPED WITH HITACHI STARTERSDS-194148 Armature; repl. OEM #31580-73 $124.95DS-194144 Starter brush set – for Hitachi style 15.95

REPLACEMENT COMPONENTS FOR HITACHI STARTERSNOTE: For OEM equivalent starters. Will not fit high-torque starters.

DS-194148

609

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

610

PART # DESCRIPTION SUG. RETAILFOR 90-93 BIG TWIN (1.4KW), EXCEPT FLT2110-0123 Chrome $431.952110-0124 Chrome, w/ K-9 drive 531.952110-0125 Black 431.952110-0126 Black, w/ K-9 drive 531.95

PART # DESCRIPTION SUG. RETAILFOR 94-06 BIG TWIN (1.4KW), EXCEPT FLT, 06 DYNA GLIDE2110-0128 Polished, w/ K-9 drive $498.952110-0129 Chrome 431.952110-0130 Chrome, w/ K-9 drive 531.952110-0131 Black 431.952110-0132 Black, w/ K-9 drive 531.95

STEALTH STARTERS•The Stealth starter struts with a shell for style•Concealed bolts and minimal lines give way to a smooth sleek design

•Feature dependable gears and components•Chrome and polished starters have engraved end caps; black starters have smooth end caps

•For the ultimate in high-torque starting, Stealth starters are available with the Krypto-9 starter drive pre-installed

PART # DESCRIPTION SUG. RETAILFOR 07-09 BIG TWIN, 06 DYNA2110-0238 Black $431.952110-0239 Chrome 431.95FOR 90-93 BIG TWIN (1.4KW), EXCEPT FLT2110-0133 Polish 349.952110-0134 Chrome 349.952110-0135 Black 349.95FOR 90-93 FLT/FLHT (1.4KW)2110-0137 Chrome 389.95

PART # DESCRIPTION SUG. RETAILFOR 90-93 FLT/FLHT (1.4KW) (CONT)2110-0138 Black $349.95FOR 94-99 BIG TWIN EVO (1.4KW)2110-0139 Polish 349.952110-0140 Chrome 389.952110-0141 Black 349.95FOR L79-E84 BIG TWIN 4-SPEEDS W/ REAR CHAIN (1.4KW)2110-0146 Polish 379.95

SUPERTORQUE STARTERS•Give your bike up to 46% more cranking torque compared to stock with intelligent gear-reduction design

•1.4kW starters perform well without the use of a high-amp battery•2.4kW starters require a 300 CCA battery•Easy installation

PART # DESCRIPTION SUG. RETAILFOR 94-06 BIG TWIN (2.3KW), EXCEPT 06 DYNA GLIDE2110-0164 w/o start button $534.952110-0165 w/ start button 638.95

PART # DESCRIPTION SUG. RETAILFOR 90-93 BIG TWIN (2.3KW)2110-0162 w/o start button $534.952110-0163 w/ start button 638.95

FIRESTARTERS•Powerful Firestarters are manufactured from new, not refurbished, cores and are durable from the very first start

•Each unit is tested on a dynamometer for proper function and includes an individual dyno sheet to validate the output

•2.3kW starters have a low amperage drain•Show-chrome finished with a polished end cap•Available with or without a start button on the starter

NOTE: Measures 8” long, not recommended for use on Dresser models.

PART # DESCRIPTION SUG. RETAILFOR 06 DYNA, 07-09 BIG TWIN MODELS2110-0244 Chrome $549.952110-0245 Black 549.95

1.6KW TWIN CAM STARTER•1.6kW output allows easy starting with stock battery cables

•Produces more cranking power for big-inch Twin Cam engines

•OEM size for easy installation, even on Softails•Starter clears oil filler on Dynas and Touring models

•11-tooth drive gear for faster cranking

GEN III STARTER MOTORS•The American-made and -designed Compu-Fire starter is so good, it’s patented•Powerhouse turns over a full 2kW, while only drawing 175A, and yet is encased in a short compact package

•Feature an extended jackshaft bolt, removable jackshaft coupler, ultra-powerful Neodymium magnets, an innovative high-torque clutch and a 6:1 planetary gear reduction that is sure to start your hard-cranking steed

•Starter body is polished with chrome end caps•PART #2110-0197 is designed for fuel-injected Twin Cams with increased compression and displacement that require faster cranking speeds

2110-01232110-0125

2110-0133

2110-0162 2110-0163

2110-0039

2110-0059

2110-0197

2110-0244

PART # DESCRIPTION SUG. RETAIL2110-0039 For 90-06 Big Twin (except 06 Dyna Glide) $579.952110-0197 For 99-06 fuel-injected Twin Cam (except 06 Dyna Glide) (high-speed starter) 579.952110-0059 For 81-09 XL and 94-08 Buell (except 1125R) 579.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

1.4 KW POLISHED STARTERS•Polished motor with a 6061 T-6 billet housing•Features a built-in gearshaft housing and gear•1.4 kW starter is designed for motors up to 100”•Direct replacement for 1.0 kW starters•Comes with mounting hardware and gasket•Uses existing starter shaft

PART # DESCRIPTIONSUG.

RETAILFOR 90-93 BIG TWIN2110-0053 Chrome/polished $429.952110-0054 Black 408.95

PART # DESCRIPTIONSUG.

RETAILFOR 94-06 BIG TWIN (EXCEPT 06 DYNA GLIDE)2110-0056 Chrome/polished $429.952110-0057 Black 408.95

SLUGGER 1.8KW HIGH-TORQUE STARTER MOTORS•Nipondenso starters are assembled in the USA with heavy-duty components and tested with state-of-the-art equipment

•Starter offers superior windings, high-tolerance heavy-duty clutch and a thicker commutator that resists flying shorts

•1.8kW output has the torque to start any monster motor with the least amount of amperage drain

•Static balanced for smoother operation•Low-profile design will clear the electronic speedometer sensor for easy installation

NOTE: Requires use of spacer block PART #DS-196233 when used on 90-06 FLT models. On FXST/FLST, Dyna and FXR models you must relocate oil lines and some wiring.

FITS MODEL BLACK WRINKLE SUG. RETAIL POLISHED/CHROME SUG. RETAIL1.5KW FOR BIG TWIN 07-09 models, 06 Dyna Glide 2110-0250 $359.95 2110-0249 $389.951.4 KW FOR BIG TWIN (EXCEPT 06 DYNA GLIDE)94-06 models DS-196030 390.95 DS-195153 410.9590-93 models DS-196031 390.95 DS-195152 410.951.6 KW FOR BIG TWIN (EXCEPT 06 DYNA GLIDE)94-06 models DS-196190 408.95 DS-196186 429.9590-93 models DS-196189 408.95 DS-196185 429.952.0 KW FOR BIG TWIN (EXCEPT 06 DYNA GLIDE)94-06 models DS-196037 487.95 DS-196034 531.9590-93 models DS-196038 487.95 DS-196036 531.951.2 KW FOR XL81-09 models DS-196178 390.95 DS-196177 410.951.4 KW FOR XL81-09 models DS-196183 390.95 DS-196182 410.95

STARTER MOTORS•Nipondenso starters are assembled in the U.S.A. with heavy-duty components and tested with state-of-the-art equipment

•Solenoid plunger, return damper and springs are replaced with stronger components

•Clutch shaft and rollers are replaced with precision-ground and hardened parts for longer service life

•All components are assembled with a special lube that has been formulated for starter roller clutch applications

•CNC-machined billet mounting noses are held together with aerospace fasteners

•After assembly, all starters go to a dyno test including hi-low voltage, stall torque, solenoid engagement, amperage draw, load test, maximum rpm and motor impulse wave form

•Starters have a 4.4:1 gear reduction and produce 46% more cranking torque than the stock starter•Starters available in four kilowatt ratings (1.2, 1.4, 1.6 and 2.0)•The 1.6 kW starter is designed for 96” or bigger motors with limited size batteries such as FXR, FXST and FXD models•The 1.4 kW starter is designed for up to 100” motors; use Terry battery cables and a battery with 300+ cranking amps like the Drag Specialties battery for best results

•The 2.0 kW starter will start any monster motor (for best results, use with Terry battery cables and a battery with 300+ cold cranking amps like the Drag Specialties battery)

•Choose from two finishes: black wrinkle or polished/chrome•Made in the U.S.A.

NOTE: 1.6 and 2.0 starters will require spacer block PART #DS-196233 when used on 90-05 FLT models. On Softail, Dyna and FXR models, you must relocate oil lines and some wiring.

PART # DESCRIPTION SUG. RETAILDS-196233 For 93-06 FLT/FLHT models $51.95

OIL FILLER SPOUT SPACER BLOCK•Used to space the filler spout outward when using a longer aftermarket starter•Machined billet aluminum with a polished finish•Made in the U.S.A.

2110-0053 2013-1388

Black wrinkle

611

Polished/ chrome

PART # DESCRIPTIONSUG.

RETAIL2013-1388 For 86-E88 Big Twin $429.952013-1384 For L79-85 Big Twin (belt drive models only) 429.952013-1379 For 73-E79 Big Twin 429.952013-1365 For 65-78 Big Twin 429.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

612

STARTER JACKSHAFT KITS•One-piece design jackshaft assembly delivers more torque to the primary and is more tolerant of misalignment problems, all for less money than stock jackshaft assemblies

•Replaces the existing shaft, couplings and pinion gear•Includes jackshaft, starter shaft bolt, spring, washer and snap ring•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2110-0073 For 94-06 Big Twin (except 06 Dyna Glide) (10-tooth) $85.952110-0169 For 94-06 Big Twin (except 06 Dyna Glide) w/ 66-

tooth conversion gear installed on clutch basket 85.952110-0072 For 89-93 Big Twin (nine-tooth) 85.95

2110-0072

STARTER JACKSHAFT KITS•Complete assembly includes shaft extension, pinion gear, coupler, spring and clips

PART # DESCRIPTION SUG. RETAIL2110-0147 For 89-93 Big Twin (9 tooth) $89.952110-0148 For 94-06 Big Twin (10 tooth), except 06 Dyna 89.95

2110-0147

STARTER JACKSHAFT ASSEMBLY KIT•Kit includes starter shaft bolt, spring, snap rings, thrust washer, lock tab washer, couplings, shaft extension and pinion gear

PART # DESCRIPTION SUG. RETAIL2110-0242 For 94-06 Big Twin models (except Dyna) w/

102-tooth ring gear $112.95DS-360214 For 89-93 Big Twin models (9-tooth) 112.95

2110-0242

DS-360214

STARTER JACKSHAFT REPAIR KITS•Repair kit includes thrust washer, lock plate, spring, screw and retaining rings

PART # DESCRIPTION SUG. RETAIL2110-0084 For 94-06 jackshaft kit $9.952110-0085 For 89-93 jackshaft kit 9.95

STARTER SHAFT BEARING•Housing bearing for starter shaft•Sold each

PART # DESCRIPTION SUG. RETAIL1120-0023 For 71-88 FX, FXWG, FXST outer primary covers;

Replaces OEM #9063 $8.95

STARTER SHAFT HOUSING BEARING•Needle bearing fits starter housings as listed below

PART # DESCRIPTION SUG. RETAILBAM-810 For 65-86 Big Twin chain drive and

67-80 XL models; repl. OEM #9062 $13.95

STARTER DRIVE CLUTCHES•Comes complete with bearing and drive clutch

•Direct OEM replacement•Sold each

PART # DESCRIPTION SUG. RETAIL2110-0009 For 91-06 Big Twin (except 06 Dyna Glide) and

91-09 XL models; repl. OEM #31663-90 $74.952110-0010 For 81-90 XL models; repl. OEM #31567-81 93.95

2110-00102110-0009

HEAVY-DUTY STARTER DRIVE CLUTCHES•Comes complete with bearing and drive clutch•Direct OEM replacement

PART # DESCRIPTION SUG. RETAIL2110-0115 For 1.4kW/1.8kW Spyke Stealth and Supertorque

starters and most 90-06 OEM style starters, repl. OEM #31663-90 $89.95

2110-0240 For 65-88 Big Twin 61.95

KRYPTO-9 STARTER DRIVE CLUTCH•The ultimate in starter drive strength

•Utilizes cutting edge materials and technology to achieve maximum strength and hardness for a beefed-up drive

•Drive sprags are made from 52100 high carbon alloy•Double cage construction provides full phasing with a tighter fit

PART # DESCRIPTIONSUG.

RETAIL2110-0116 For 1.4kW Spyke starter $185.952110-0117 For 1.8kW/2.4kW Spyke starters, and upgrade for 90-06

Big Twin 1.6kW, 2.0kW, 2.2kW aftermarket starters 285.95

STARTER DRIVE CLUTCH•Comes complete with bearings and drive clutch

•Available for high-performance or OEM starters

•Sold each

PART # DESCRIPTION SUG. RETAILFOR 91-06 BIG TWIN (EXCEPT 06 DYNA GLIDE) AND 91-07 XL STARTERSDS-196231 For 1.2 kW or 1.4 kW or 1.8 kW Slugger starters,

repl. OEM #31663-90 $102.95DS-196232 For 1.6 kW and 2.0 kW starters 122.95

2110-0115 DS-196231

2110-0116

PART # DESCRIPTION SUG. RETAIL79-2101 Fits 91-06 Big Twin (except 06 Dyna Glide) and

91-09 XL; repl. OEM #31663-90 $63.9579-2103 Fits 89-90 Big Twin; repl. OEM #31544-90 63.95

STARTER DRIVE CLUTCHES•High-quality components to repair common failures of OEM Harley starters

•Clutches with bearings and spring are available for 89-90 and 91-06 models

PART # DESCRIPTIONSUG.

RETAILDS-242117 Starter drive gear for

65-88 FX and 67-80 XL; repl. OEM #31443-65A $30.95

STARTER DRIVE•Heavy-duty, weatherproof, five-roller clutch•Sold each

79-210179-2103

DS-196231

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

PART # DESCRIPTION SUG. RETAILDS-195147 For 89-90 Big Twin and 81-90 XL models;

repl. OEM #31596-85 (set) $17.95DS-194144 For 74-88 Big Twin and 74-E76 XL models;

repl. OEM #31582-73 (set) Hitachi 15.95DS-195142 For 66-82 Big Twin and 67-80 XL models;

repl. OEM #31541-66 (set) Prestolite 17.95

STARTER BRUSHES•Replacement brushes for early and late model starters

PART # DESCRIPTION SUG. RETAIL1132-0092 Starter shaft thrust washers $9.95

STARTER SHAFT THRUST WASHER•Replaces OEM #31502-65•Sold in pairs

PART # DESCRIPTION SUG. RETAIL2110-0241 For 98-06 Big Twin (except 06 Dyna) $134.952110-0243 For 94-97 Big Twin 131.95

RING GEAR CONVERSION KITS•Convert 102-tooth ring gear to 66-tooth ring gear

PART # DESCRIPTION SUG. RETAILDS-242080 For 90-93 Big Twin models (66-tooth) $79.95DS-242081 For 94-97 Big Twin models (102-tooth) 112.95

STARTER RING GEAR•High-quality ring gears designed to bolt on 90-97 Big Twin models with OEM chain clutch baskets

•Replace your riveted ring gear by simply drilling out rivets and bolting on new gear

•Comes complete with mounting bolts

PART # DESCRIPTION SUG. RETAIL2110-0051 For 98-06 Big Twin (except 06 Dyna Glide) $166.952110-0049 For 94-97 Big Twin 166.952110-0050 For 90-93 Big Twin 166.95

RING GEAR CONVERSION KITS•84-tooth ring gear conversion kit for chain drive primary

•Include ring gear, six bolts, and a 10-tooth pinion gear

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-242074 102-tooth ring for 94-97 Big Twin $96.952110-0204 102-tooth ring for 98-06 Big Twin 96.952110-0205 66-tooth ring for 90-93 Big Twin 96.95

OEM-REPLACEMENT STARTER RING GEARS•Designed to bolt on to primary chain clutch shells

•High-quality steel construction

•Includes mounting hardware

STARTER RING GEAR•Replacement weld-on ring gear

PART # DESCRIPTIONSUG.

RETAILDS-196180 For 65-E84 Big Twin (w/

electric start); repl. OEM #33163-65B (66-tooth) $59.95

PART # DESCRIPTION SUG. RETAIL2013-1702 For 98-06 Big Twin (except 06 Dyna Glide) $159.952013-1703 For 94-97 Big Twin 159.952013-1704 For 90-93 Big Twin 189.95

10/84 STARTER GEAR SET•Features a 10-tooth pinion gear and an 84-tooth starter ring gear that produces 15% more starting torque than stock gears

•Gears are made of 8620 carbonized steel for strength and long life

•Uses OEM clutch baskets•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-195154 For L79-84 Big Twin; repl. OEM #31572-79 (Hitachi) $43.95DS-195155 For 73-E79 Big Twin; repl. OEM #31572-73 (Hitachi) 38.95DS-195156 For 65-72 Big Twin; repl. OEM #31465-65 (Prestolite) 38.95DS-195157 Oil deflector plate for Prestolite or Hitachi; repl.

OEM #60516-65A 15.95

STARTER SHAFT HOUSINGS•Available for Prestolite or Hitachi starter motors

•Fit chain drives•Oil deflector and needle bearing (OEM #9062) PART #BAM-810, must be purchased separately

DS-195147

2110-0241

2110-0243

DS-242080

DS-242081

2110-0049

2110-02042110-0205

2013-1702

DS-195155

DS-195154

DS-195156

DS-195157

STARTER SHAFT LOCK WASHERS•Sold in 10-pk.

PART # DESCRIPTION SUG. RETAIL2110-0229 For 94-06 Big Twin; repl. OEM #33126-94 $.95 (ea.)2110-0232 For 93 Big Twin; repl. OEM #33126-93 1.55 (ea.)2110-0231 For L90-92 Big Twin; repl. OEM #33126-90 1.55 (ea.)2110-0230 For 89-E90 Big Twin; repl. OEM #33125.89 1.55 (ea.)

2110-0232

STARTER SHAFT COMPONENTS•Sold individually except PART#2110-0233 which is sold in a 5-pk.

•Nut and spacer kit PART #2210-0237 includes left-hand thread starter shaft nut, replaces OEM #31493-67 and starter shaft to primary spacer, replaces OEM #31531-69

PART # DESCRIPTION SUG. RETAIL2110-0233 Bendix lever pivot bolt for 65-84 Big Twin;

repl. OEM #31478-65A $7.95 (ea.)2110-0234 Starter gear shifter lever for 65-82 Big Twin;

repl. OEM #31445-65A 28.952110-0235 Starter shaft shifter collar for 65-84 Big Twin;

repl. OEM #31503-65 28.952110-0236 Starter shaft shifter collar for 70-82 Big Twin;

repl. OEM #31503-70 28.952110-0237 Starter shaft/primary nut and spacer kit for

65-82 Big Twin; repl. OEM #31530-65 28.95

2110-0234

613

614

PART # DESCRIPTION SUG. RETAILDS-242098 For all Big Twin models with 4-speed

transmissions and rear chain drives (except 83-84 FL) from 65-84; repl. OEM #31445-65A $8.95

DS-242097 For 67-80 XL, XLH; repl. OEM #31424-67 8.95

STARTER GEAR ENGAGEMENT LEVERS•These starter components replace OEM-style engagement levers

PART # DESCRIPTION SUG. RETAILDS-325267 For 91-09 Big Twin models except FXST,

103” and 110” SE models $116.95

BILLET STARTER MOTOR END COVER•One-piece, chrome-plated billet aluminum cover replaces the OEM end cover and also covers the existing solenoid cover

•Ball-end-milled design matches other Drag-Hotop products

•Includes chrome mounting hardware•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 91-09 BIG TWIN EXCEPT FXST, 103” AND 110” SE MODELSDS-326130 Grooved $63.95DS-326131 Smooth 63.95

BILLET STARTER END COVERS•Chrome-plated aluminum construction

•Fits OEM startersPART # DESCRIPTION SUG. RETAIL2110-0166 For 96-07 Evolution and Twin Cam $24.95

STARTER CONNECTOR PLUG COVER•Quick, easy chrome cure for the stock white plastic electrical connector on your starter

•Sold each

NOTE: Not recommended for Softail models, as the connector is covered by the oil tank.

PART # DESCRIPTION SUG. RETAIL0935-0257 For 65-84 Shovelhead $2.95

STARTER SOLENOID BLOCK-OFF PLATE•Block-off plate replaces OEM # 60644-65DL

PART # DESCRIPTION SUG. RETAILDS-325264 For all 91-09 Big Twin starters except FXST, 103”

and 110” SE models $65.95

DIAMOND STARTER END COVER•High-quality, chrome-plated billet aluminum

•Matching engine covers, brake caliper inserts, footpegs and grips are available separately

•Made in the U.S.A. PART # DESCRIPTION SUG. RETAILDS-325517 For 65-88 Big Twin and 67-80 XLH models $11.95

STARTER END COVER•Chromed, die-cast starter end cover adds a finishing touch to custom or fully dressed Harley models; features a smooth finish

PART # DESCRIPTION SUG. RETAILDS-242116 For 65-84 FL/FX, 84-88 FXST/FLST and 67-80 XL;

repl. OEM #71469-65 $39.95DS-242281 For 80-88 FLT, FLHT and 82-88 FXR; repl.

OEM #31489-79A 45.95

STARTER SOLENOID•Features zinc-finished moisture-proof case, hardened steel plunger and long-life contact disc

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 65-84 FL, FLH, FX, 84-88 FXST AND 67-80 XL; REPL. OEM #71469-6540111 Zinc finish solenoid $48.9540111C Chrome solenoid 67.95FOR 80-88 FLT, FLHT; 82-88 FXR; REPL. OEM #31489-79A40114 Zinc finish solenoid 53.9540114C Chrome solenoid 64.95SOLENOID REPAIR KIT40112 Cap, mounting lugs, plunger, spring

and assembly screws 16.95

STARTER SOLENOIDS AND REPAIR KIT•Features permanently sealed moisture-proof cases, heavy-duty, multi-weld brackets, hardened steel plungers with long-life contact discs and high-strength end caps

•Available zinc- or chrome-plated•Made in the U.S.A.

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERALPART # DESCRIPTION SUG. RETAIL79-1101 For 89-09 Big Twin; repl. OEM #31604-91 $19.95

STARTER SOLENOID KIT•Kit contains contacts and gaskets to cover all models

PART # DESCRIPTION SUG. RETAILDS-196230 For 89-09 Big Twin models; repl. OEM #31604-91 $30.95

STARTER SOLENOID REPAIR KIT•Kit includes plunger assembly, contacts and spring

DS-242097 DS-242098

DS-326130

DS-326131

40111C 4011240114C

DS-242116

All part numbers in BOLD MAGENTA are new for 2009. 615

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

PART # DESCRIPTION SUG. RETAILDS-373598 For 91-09 Big

Twin and 91-09 XL $15.95

SOLENOID END COVER•Chrome-plated steel•Includes mounting hardware

PART # DESCRIPTION SUG. RETAILDS-376596 For all 91-09 Big Twin, 91-09 XL models $19.95

CHROME SOLENOID END COVER•Features the Blood Groove design that matches many other Küryakyn accessories

•Replaces the stock OEM cover•Comes complete with chrome hardware; reuses stock gasket

PART # DESCRIPTION SUG. RETAIL2110-0228 For 07-09 FLHT/FLHR/FLTR/FLHX $69.952110-0227 For 99-06 FLHT/FLHR/FLTR 69.95

STARTER SOLENOID COVERS•Covers the starter solenoid and related wiring with beautiful chrome

•Works with stock starter end cover

PART # DESCRIPTION SUG. RETAIL2110-0118 For 1.2, 1.4kW starters $69.952110-0119 For 1.0, 2.0, 2.4, 2.6kW starters 69.952110-0120 For 1.6, 1.8kW starters 69.95

SOLENOID END COVER STARTER BUTTONS•Machined from billet 6160 aluminum, then triple show-chrome plated

•Feature a unique internally adjustable actuator to maintain constant contact as parts wear

•Can be used as a primary or backup starter actuation system

PART # DESCRIPTION SUG. RETAILFOR 1.2 / 1.4 KILOWATT STARTERDS-272214 Chrome $94.95DS-272215 Black 94.95FOR 1.6 KILOWATT STARTERDS-272216 Chrome 118.95FOR 2.0/2.4 KILOWATT STARTERDS-272217 Chrome 118.95

SOLENOID END COVER/STARTER BUTTONS•Billet aluminum construction available with a chrome or black finish•Replaces the solenoid end cover and includes mounting screws•Fits most 91-09 OEM and aftermarket starter motors (exceptCompu-Fire, 2.0/2.4 Terry starters)•Made in the U.S.A.

NOTE: On some models the exhaust system may not allow access to the starter button.

PART # DESCRIPTION SUG. RETAILDS-373608 For 71-88 FX and 65-88 FL models; repl.

OEM #s 31444-65A and 31475-77 $5.95

RUBBER SOLENOID BOOT FOR BIG TWIN•A molded black rubber boot for 4- and 5-speed starter solenoids

•We recommend replacing the OEM boot when installing our chrome solenoid end cover, PART #DS-373609

PART # DESCRIPTION SUG. RETAILDS-373609 For 84-88 FXST, 80-86 FXWG and 65-85 FXE/FL models $21.95

SOLENOID END COVER•Beautifully chromed cover features die-cast construction

•Fits over the starter solenoid rubber boot, PART #DS-373608

•Looks great on our chromed solenoid, PART #40111C

U.S. Des. Pat. #283,210.

PART # DESCRIPTIONSUG.

RETAILDS-373611 Chrome solenoid body cover fits

65-88 Big Twin models (except rubber-mounted motors) $12.95

SOLENOID BODY COVER FOR BIG TWIN•Will not fit rubber-mounted motors•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL0807-3000 For 91-06 models $15.95

STARTER BOOST RELAY•Provides full-battery voltage to the coil during cranking

•Makes start-up quicker and easier, especially with high-compression or stroker engines

PART # DESCRIPTIONSUG.

RETAILDS-325866 For 91-09 models; repl.

OEM #31504-91A w/ a diode $10.95

RELAY•For the starter, brake light and fuel pump•Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL

FOR 00-09 TWIN CAM MODELS0913-1002 Micro relay w/ diode; repl.

OEM #31511-01A (system) $9.95DS-325849 Micro relay w/ diode; repl.

OEM #31522-00B (starter) 6.95

MICRO RELAY•Direct OEM replacement•Sold each

PART # DESCRIPTION SUG. RETAIL2101-0078 For single-fire ignition power conversions $18.95

IGNITION POWER RELAY KIT•Kit is designed to correct starting problems in motorcycles with high compression ratios or large displacement engines that use Twin Tec PART #s DS-242372, DS-242373, DS-242374 or DS-242375 single-fire installations

•The combined draw of the starter motor, single-fire coil and the long length of wire between the battery, engine stop-run switch and the coil may leave too little energy at the coil to provide enough spark to fire the engine – the power relay kit solves the problem by supplying full battery voltage to the coil

•Kit includes a high-quality relay, wire and all required terminals

2110-0227

DS-272214

DS-272215

0913-1002

DS-325849

2110-0119

2110-0227

616 All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

PART # DESCRIPTION SUG. RETAILDS-325494 For 80-E85 FLT, 73-79 FX/FL, 85 FX/FXWG, L84-85

FXR/FXRS and 75-79 XL; repl. OEM #71463-73 $24.95

STARTER RELAY SWITCH•Features a heavy-duty, brightly finished case and long-life contacts

•Made in the U.S.A.PART # DESCRIPTION SUG. RETAILDS-325702 For L85-E93 FLT; E84 FLT; 80-84 FX, FL, FXWG;

86-E93 FXST, FXWG, FXR, FXRS; 91-E93 Dyna Glide and 80-E93 XL models; repl. OEM #31506-79B $15.95

2106-0058 For 05-09 XL; repl. OEM #31601-04 13.95

STARTER RELAY SWITCH•Designed to handle high-current draw with ease

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-325651 For 80-E85 FLT; 73-79 FX, FL; 85 FX, FXWG; L84-85

FXR, FXRS and 75-79 XL models; repl. OEM #71463-73 $30.95

BLUE STREAK® STARTER RELAY SWITCH•Features a copper-plated bracket for improved ground connection

•Impact-resistant, high-dielectric strength case•Magnetic circuit with increased strength for better starting in weak battery conditions

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-272095 Black four-wire relay socket $9.95DS-272096 Colored five-wire relay socket 5.95

RELAY SOCKET ASSEMBLIES•Used for starter relay and other relays on later model bikes

•Available with black wires or colored wires (red, green, blue, yellow and orange)

PART # DESCRIPTION SUG. RETAILDS-195101 Black $229.95

THE “GREAT” GENERATOR FOR FL AND XL•Replacement 10A, 12V generator•Features a balanced armature, precision-ground, heat-treated armature shaft, die-cast and machined-aluminum end cover and end plate

•Brush end contains sealed roller bearing, while the drive end has a shielded ball bearing•Available in black or chrome versions•All components are interchangeable with OEM parts

PART # DESCRIPTION SUG. RETAILDS-195102 Chrome $244.95

PART # DESCRIPTION SUG. RETAILDS-195105 For 65-69 FL and 65-81 XL models;

repl. OEM #29975-65A $315.95

CYCLE ELECTRIC AMERICAN-MADE 12V GENERATOR•High-quality construction and components; manufactured by the same company that supplies OEM

•Armature is balance wound, and the epoxy-bonded wires are fused to the commutator; hard maple wire wedges secure the windings

•12V; 10A•Available with black finish•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 58-69 FL, FLH AND 75-84 XL MODELSDS-195110 Generator w/ standard regulator $435.95DS-313074 Generator w/ low volt regulator 441.95DS-195111 Repl. standard regulator 146.95DS-313072 Repl. low voltage regulator 146.95

CYCLE ELECTRIC 12V VARIABLE AMPERAGE GENERATORS WITH BUILT-IN REGULATOR•Feature the unique concept of a built-in regulator and a simple two-wire hookup

•Regulators have variable amperage output, producing more amps when cold for faster charging after using the electric start

•All parts are interchangeable with OEM (except end cap/regulator)

•Available in black with a standard voltage or low voltage regulator (for bikes that are running a battery in a wraparound oil tank)

•Made in the U.S.A.

FOR 65-69 FL AND 65-81 XL MODELS THAT USE OEM #29975-65A

PART # DESCRIPTION SUG. RETAILDS-325531 For 58-69 Big Twin and 57-81 XL models $12.95

GENERATOR END COVER•Features die-cast construction with a smooth chrome finish

PART # DESCRIPTION SUG. RETAILDS-373586 For 58-69 FL and

57-81 XL models $14.95

GENERATOR COVER•Chromed to add a custom look to any generator

PART # DESCRIPTION SUG. RETAILARMATURESDS-195086 12V armature for 65-81; repl. OEM #30851-65A $69.95151301 12V Accel armature for 65-81; repl. OEM #30851-65A 125.95FIELD COILS151303 12V Accel coil for 65-69 FL, FLH; 65-81 XL, XLCH,

XLH; repl. OEM #30201-65 (pr.) 62.95BRUSHESDS-195099 Drag Specialties brushes for 58-69 FL, FLH and

58-81 XL; repl. OEM #30426-58 (pr.) 5.95192300 Accel brushes for 58-81; repl. OEM #30426-58 (pr.) 6.95192302 Accel brushes for 32-52 G, W, WL, WLA Flat;

37-47 U, UL Flat; 37-48 UH, ULH; 41-47 E, F, FL; 48-52 FL; repl. OEM #30425-32 (pr.) 21.95

PART # DESCRIPTION SUG. RETAILDRIVE GEARS/BEARING/RETAINERDS-195067 Drive gear for 58-69 FL; repl. OEM #31070-58 $7.95DS-195068 Drive gear for 63-E84 XL; repl. OEM #31073-63A 7.950924-0111 Generator drive gear bearing for 58-81 FL/XL;

repl. OEM #9007 3.95SEALSDS-194490 Armature end plate seals;

repl. OEM #30145-46A (5-pk.) 2.95 (ea.)DS-194492 Commutator end cover seals;

repl. OEM #12002 (5-pk.) 3.95 (ea.)GENERATOR OVERHAUL KIT192303 Accel generator overhaul kit for 58-69 FL and

58-81 XL 6V or 12V generators 17.95

GENERATOR COMPONENTS•Top-quality Drag Specialties or Accel replacement parts for Harley generators

•All components are interchangeable with OEM parts and meet or exceed OEM specifications

•Sold individually, unless noted

DS-272095 DS-272096

DS-195102DS-195101

DS-195110

151301151303

1923000924-0111

DS-195068 192303

DS-325702

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

32 AMP CHARGING SYSTEM KIT•Heavy-duty rotors with magnets that are enclosed in stainless steel

•A super thick hub and splines eliminate cracks

•Precision wound stator•Includes a regulator to control everything

40A 3-PHASE CHARGING SYSTEMS•Provide 25A at idle and 40A continuously above 2800 rpm•Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on the stock location without any frame modifications

•Precision-balanced vented rotor keeps the stator cooler in closed primary systems to maintain maximum output under all high-current draw conditions

•Custom-designed flanged seal spacer provides maximum support for the rotor

•Voltage regulator output is calibrated to 14.25V from idle on up

•Ideal for fuel-injected engines and bikes with overdrive-type transmissions

•Made in the U.S.A.

NOTE: 96-05 FLT models will require regulator mount PART #DS-330006.

PART # DESCRIPTION SUG. RETAIL2112-0097 For 84-99 Evo Big Twin w/ enclosed primary drive (includes vented rotor) $399.952112-0099 For 84-99 Evo Big Twin w/ open primary drive (includes non-vented rotor) 399.952112-0098 For 03-06 Twin Cam (except 06 Dyna/FLT) w/enclosed primary drive (includes vented rotor) 399.952112-0153 For 99-02 Twin Cam w/ enclosed primary drive (includes vented rotor) 399.952112-0100 For 03-06 Twin Cam w/ open primary drive (except 06 Dyna/FLT) (includes non-vented rotor) 399.952112-0152 For 99-02 Twin Cam w/ open primary drive (includes non-vented rotor) 399.95

32A CHARGING SYSTEM KIT•Kit includes stator, rotor and a black series-type regulator

•Series-type regulator reduces load on stator and decreases engine drag•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-195201 For 84-99 FXST, FLST, 91-98 Dyna, 80-98 FLT,

FLHT, 82-94/99 FXR, 70-84 FX/FL models (narrow rotor design) $249.95

DS-195202 Repl. stator for 89-99 Big Twin (except Twin Cam); repl. OEM #29970-88 88.95

DS-195203 Repl. rotor for all 81-99 Big Twin ; repl. OEM#29957-81B (narrow) 106.95

THREE-PHASE CHARGING SYSTEM•32A narrow rotor design converts an original single-phase system to a three-phase system on Evolution or S&S Evolution motors

•Digitally calibrated for optimum charging level over a wide temperature range

•Rugged billet aluminum regulator housing is highly polished for a custom look

•Self-temperature compensated to control heat and extend service life; over-temperature protection prevents catastrophic heat failure under severe operating conditions

•Highly efficient power conversion means more current at lower speeds for easy starting and extended battery life; more current is also available for operating EFI and other electronic accessories

•System reaches full charge at 550 to 650 rpm; factory system reaches full charge at 1000 rpm

•Designed for custom applications

2112-0097

PART # DESCRIPTION SUG. RETAIL2112-0232 91-99 Big Twin Evolution models (except EFI) $277.95

PART # DESCRIPTION SUG. RETAIL2112-0101 For Evolution-style Big Twin motors $378.95

617

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

618

CYCLE ELECTRIC ALTERNATOR KITS•Kits include stator, rotor, voltage regulator and mounting hardware•Available with a black Cycle Electric rectifying regulator•A special low voltage kit is available for Softail models or bikes with horseshoe oil tank•38A and 45A systems have a wiring harness that bolts to the regulator and comes with a stand-off mount

•Made in the U.S.A.

NOTE: Adding electrical accessories increases amperage usage. When doing so it is important to consider amperage ratings of switches and wires. If you draw too many amps through a switch or wire, it will heat up and may burn. Fuses and breakers are sized to protect wiring and switches. DO NOT CHANGE 30A MAIN BREAKER TO A 50A BREAKER. THE SWITCHES AND WIRING WILL NOT BE PROTECTED.

PART # DESCRIPTION SUG. RETAILALTERNATOR KITSDS-195214 For 84-99 FX, FXR, FXD FXDWG (except FXST, FLST);

32A at 2500 rpm $385.95DS-195215 For 84-99 FXST, FLST (low voltage); 29A at 2500 rpm 385.952112-0017 For 99-03 FXD; 29A at 2500 rpm 412.95DS-195217 For 89-98 FLT, FLHT, FLHR; 45A at 2500 rpm 750.952112-0019 For 99-05 FLT, FLHT, FLHR; 45A at 2500 rpm 730.95DS-195216 For 89-98 FLT, FLHT, FLHR; 38A at 2500 rpm 444.952112-0018 For 99-05 FLT, FLHT, FLHR; 38A at 2500 rpm 434.95DS-195213 For 70-84 FX, FLH, FLT, FXR; 22A at 2500 rpm 372.95

PART # DESCRIPTION SUG. RETAILREPLACEMENT REGULATORDS-313011 For kit #DS-195213 $126.95DS-313016 For kit #DS-195214 132.95DS-313017 For kit #DS-195215 132.95DS-313064 For kit #2112-0017 151.952112-0144 For kit #s 2112-0018, 2112-0019 193.952112-0296 For kit #s DS-195216, DS-195217 177.95REPLACEMENT STATOR2112-0155 For kit #DS-195213 92.952112-0156 For kit #s DS-195214, DS-195215 99.952112-0157 For kit #2112-0017 107.95DS-195229 For kit #s DS-195216, DS-195217 125.952112-0160 For kit #s 2112-0018, 2112-0019 130.95REPLACEMENT ROTORDS-195230 For kit #s DS-195213, DS-195214, DS-195215, 2112-0017 162.95DS-195231 For kit #s DS-195216, 2112-0018 117.95DS-195232 For kit #s DS-195217, 2112-0019 426.95

HEAVY-DUTY 32A CHARGING KIT•Kit includes an encapsulated magnetic rotor, precision-wound stator and an 89-99 32A chrome voltage regulator

•Features a thick (.476") center rotor as compared to a .222" center OEM rotor

NOTE: Not for fuel-injected models.

PART # DESCRIPTION SUG. RETAILDS-195210 For 70-E84 FX, FL, 90-96 FLT, 91-98 FXD,

L84-98 FXST, 82-94/99 FXR w/ 32A system $239.95

CHARGING SYSTEM•38A system is great for new customs or stock replacement

•System includes stator (OEM #30017-01), rotor (OEM #29981-95) and regulator (OEM #74610-01)

•Regulator features a bright chrome finish•Rotor, stator and regulator also available separately

PART # DESCRIPTION SUG. RETAIL2112-0096 For 01-06 FXST/FLST $299.95

3-PHASE 38A CHARGING KITS•Get more power out of a smaller stator•Kits deliver 17A at 1000 RPM, which is an increase of 10A from the old 32A system

•38A regulator is larger and may need a custom mounting bracket on Shovelhead models

PART # DESCRIPTION SUG. RETAILREPLACEMENT REGULATORS2112-0015 For kit PART #2112-0150 $182.952112-0016 For kit PART #2112-0151 197.952112-0145 For kit PART #2112-0149 188.95REPLACEMENT STATORS2112-0146 For kit PART #s 2112-0150, 2112-0151 98.95

PART # DESCRIPTION SUG. RETAILREPLACEMENT STATORS (CONT)2112-0147 For kit PART #s 2112-0148. 2112-0149 $100.95REPLACEMENT ROTORSDS-195231 For kit PART #s 2112-0150, 2112-0151 117.95DS-195230 For kit PART #s 2112-0148. 2112-0149 162.95

2112-0148

DS-195214 DS-195216

PART # DESCRIPTION SUG. RETAILCHARGING KITS2112-0150 For 01-06 FXST, FLST; 38A at 2500 rpm $403.952112-0149 For 84-99 FXST, FLST; 38A at 2500 rpm 455.952112-0151 For 04-06 FXD/FXDWG; 38A at 2500 rpm 411.952112-0149 For 91-98 FXD/FXDWG; 38A at 2500 rpm 455.952112-0148 For 84-98 FLT, FLHT, FLHR, 84-98 FXR;

38A at 2500 rpm 462.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

619

ALTERNATOR STATORS•Each meets or exceeds OEM specifications and features precise construction

PART # DESCRIPTION SUG. RETAILUNCOATED2112-0094 For 01-06 FLST/FXST, 04-05 Dyna Glide;

repl. OEM #30017-01 $99.952112-0206 For 02-05 FLT; repl. OEM #29987-02 94.95DS-195092 For 89-99 FX, FL (except Twin Cam 88);

repl. OEM #29970-88 (32A) 64.95DS-195098 For 81-88 FX, FL; repl. OEM #29965-81 64.95DS-195097 For 76-80 FX, FL; repl. OEM #29965-75 64.95DS-195096 For 70-75 FL; 71-75 FX; repl. OEM #29965-70 64.95DS-195039 For 91-06 XL; repl. OEM #29967-89/89A 64.95DS-195093 For L84-90 XL; repl. OEM #29967-84A 64.95COATEDDS-195035 For 81-88 FX, FL; repl. OEM #29965-81 64.95DS-195036 For 76-80 FX, FL; repl. OEM #29965-75 64.95

ALTERNATOR STATORS•Made from the finest components available, these high-quality stators are backed by a lifetime replacement warranty

•Each is individually wrapped and packaged in an attractive four-color display box

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2110-0210 For 01-06 FXST/FLST/04-05 Dyna unmolded (38A)

repl. OEM #30017-01 $92.95152109 For 99-01 FLT, unmolded (38A); repl. OEM #29987-99 215.95152110 For 97-98 FLT, unmolded (38A ); repl. OEM #29987-97 215.95152107 For 89-99 BT (except Twin Cam 88) unmolded (32A);

repl. OEM #29970-88A 107.95152104 For 81-88 BT unmolded (22A); repl. OEM #29961-81 107.95152103 For 81-88 BT molded (22A); repl. OEM #29965-81 107.95152102 For 76-80 BT molded (17.8A); repl. OEM #29965-75 120.95152101 For 70-75 BT molded (15A); repl. OEM #29965-70 169.95152108 For 91-06 XL unmolded (22A); repl. OEM #29967-89A 107.95152106 For L84-90 XL molded (19A); repl. OEM #29967-84 107.95152105 For L84-90 XL unmolded (19A); repl. OEM #29967-84A 105.95

ALTERNATOR ROTORS•Feature encapsulated magnets in a reinforced steel shell•Heavy-duty rotor features a .476” reinforced center thickness•OEM rotors have a .222” center thickness unless noted

NOTE: Not for EFI systems.

PART # DESCRIPTION SUG. RETAIL2112-0093 For 01-06 FXST/FLST, 04-05 Dyna 38A; repl. OEM

#29981-95 $107.952112-0092 For 95-06 Big Twin, except 06 Dyna/FLHT 45A;

OEM #29999-97 264.95DS-195206 For L81-99 Big Twin (except EFI) 32A; repl OEM

#29957-81B (heavy duty) 129.95DS-195208 For 70-E81 Big Twin 15- and 17.8A; repl OEM

#29957-70, 29965-75 (1.2” center thickness) 129.95

CYCLE ELECTRIC ROTORS AND STATORS•Designed for 18-45A applications•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILROTORSDS-195232 For 95-06 Big Twin, 45A/48A; repl. OEM #29999-97B

(except 06 Dyna/FLT models) $426.95DS-195231 For 95-06 Big Twin, 38A; repl. OEM #29981-95

(except 06 Dyna/FLT models) 117.95DS-195230 For 70-06 Big Twin,18, 22, 32A;

repl. OEM #29956-70, 29957-75 and 29957-81B 162.95STATORSDS-195225 For 76-80 Big Twin, 18A; repl. OEM #29965-75 85.952112-0155 For 81-88 Big Twin, 22A; repl. OEM #29965-81A 92.952112-0156 For 89-99 Big Twin (except Twin Cam), 32A;

repl. OEM #29970-88 99.95DS-195228 For 97-98 FLT, 38A; repl. OEM #29987-97 133.952112-0159 For 99-01 FLT, 45A; repl. OEM #29987-99 128.952112-0160 For 02-05 FLT, 45A; repl. OEM #29987-02 130.952112-0157 For 00 FXST, FLST and 99-03 FXD, FXDWG 32A;

repl. OEM #29951-99 107.952112-0158 For L84-90 XL/Buell, 18A; repl. OEM #29967-84A 93.95DS-195224 For 91-06 XL/94-02 Buell, 22A; repl. OEM #29967-89A 96.95

STATOR LOCK AND MOUNTING KIT•Kit includes two locking plates (OEM #29988-73), alternator plug retainer (OEM #29954-71), two retainer screws (OEM #2216W), four stator mounting screws (2653) and four No. 10 internal tooth lockwashers (OEM #7118)

PART # DESCRIPTION SUG. RETAILDS-195103 For 70-84 FL and 70-86 FX $9.95

REPLACEMENT ROTORS•Designed to work with 22 and 32A charging systems

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-195203 For all 81-99 Big Twin models;

repl. OEM #29957-81B (narrow) $106.95DS-195116 For S&S alternator motors (narrow) 106.95

2112-0094

DS-195036 2112-0206

152109

2112-0157

2112-01562112-0155

2112-0093

DS-195232

DS-195230

DS-195231

2112-0092 DS-195206

DS-195203

2110-0210

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

620

FITS MODEL CHROMESUG.

RETAIL BLACKSUG.

RETAIL OEM # AMPSCHARGINGTYPE

LEADLENGTH

For 97-01 FLHT, 99-01 FLHRCI, FLTRI 7808-1011 $129.95 7808-1010 $122.95 74505-97 35 12V 45”For 01-06 FLST, FXST, FXSTD 7808-1013 83.95 7808-1012 78.95 74540-01 25 12V 41”For 00 FXST, FLST 7808-1015 67.95 7808-1014 61.95 74512-00 25 12V 41”For 00-03 FXD, FXDWG 7808-1017 65.95 7808-1016 58.95 74518-99A 25 12V 55”For 89-99 80” Evolution Big Twin (32A) DS-313018 71.95 DS-313020 62.95 74519-88 32 12V 51”For 81-88 Big Twin DS-313000 59.95 DS-313021 50.95 74513-82, 74516-86 22 12V 51”For 76-80 Big Twin DS-313001 59.95 DS-313022 50.95 74512-79A 17.8 12V 57”For 70-75 Big Twin DS-313002 60.95 DS-313023 52.95 74510-70A 15 12V 38”For 65-69 FL; 65-77 XL DS-3130031 56.95 DS-313024 46.95 All 12V 10 12V N/AFor 58-64 FL, XL DS-313004 56.95 DS-313025 46.95 - 15 6V N/AFor 92-93 XL DS-313010 59.95 - 74523-92 22 12V N/AFor 91 XL DS-313009 62.95 - 74523-91 22 12V N/AFor L84-90 XL DS-313005 59.95 DS-313026 52.95 74523-84A 19 12V 51”For 82-E84 XL w/ generator DS-3130071 58.95 DS-313027 49.95 74504-82 13 12V 5”For 78-81 XL, XLCH; 77-78 XLCR DS-3130081 58.95 DS-313028 49.95 74504-78 10 12V 5”1 Regulators will work without a battery.

SOLID-STATE REGULATORS•High-reliability voltage regulators feature rugged aluminum alloy construction and are available in Drag’s chrome finish

•All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

•Made in the U.S.A.

NOTE: 70-75 regulators do not have tach wires.

PART # DESCRIPTION SUG. RETAIL2112-0095 For 01-06 FLST/FXST; OEM # 74540-01 $114.95

SOLID-STATE REGULATOR•High-reliability chrome voltage regulator features rugged aluminum alloy construction•Provides accurately-regulated voltage under all electrical loads, with no relay contacts to wear or become maladjusted

•Environmentally sealed for protection against moisture and shock

7808-10107808-1011 7808-1013 7808-1012

7808-1015 7808-10147808-1017 7808-1016 DS-313018

DS-313021 DS-313001

DS-313023 DS-313003DS-313009

DS313026 DS-313007 DS-313028

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

621

PART # DESCRIPTIONSUG.

RETAILSTANDARD2112-0014 For 04-05 FLT/FLHT/FLHR, 38/47A; repl. OEM #74505-04 $201.952112-01441 For 02-03 FLT/FLHT/FLHR, 38/47A; repl. OEM #74505-02 193.95DS-313075 For 97-01 FLT/FLHT/FLHR, 38/47A; repl. OEM #74505-97 203.952112-0016 For 04-05 Dyna, 32A; repl. OEM #74631-04 197.95DS-313064 For 99-03 Dyna, 32A; repl. OEM #74518-99A 151.95DS-313016 For 89-99 Evolution Big Twin, 32A; repl. OEM #74519-88A 132.95DS-313011 For 81-88 Big Twin, 22A; repl. OEM #74516-86 126.95DS-313006 For 76-80 Big Twin, 17.4A; repl. OEM #74512-79 127.95DS-313068 For 94-03 XL, 22A; repl. OEM #74523-94A 132.95DS-313014 For 92-93 XL, 22A; repl. OEM #74523-92 126.95

PART # DESCRIPTIONSUG.

RETAILSTANDARD (CONT)DS-313013 For 91 XL, 22A; repl. OEM #74523-91 $126.95DS-313012 For 85-90 XL, 17.4A; repl. OEM #74523-84A 130.95DS-313035 For 98-02 Buell, 22A; repl. OEM #74567-98Y 131.95DS-313013 For 95-97 Buell, 22A; repl. OEM #74523-91 126.95LOW VOLTAGE2112-0015 For 01-06 FXST, FLST, 32A; repl. OEM #74504-01 182.95DS-313066 For 00 FXST, FLST, 32A; repl. OEM #74512-00 151.95DS-313017 For 89-99 Evolution Big Twin, 32A; repl. OEM #74519-88A 132.95DS-313015 For 81-88 Big Twin, 22A; repl. OEM #74516-86 126.951 Has permanently connected wires and a bracket to hold the stock

stator plug.

CYCLE ELECTRIC RECTIFYING REGULATORS•Control voltage on Harley-Davidson alternators, unlike other rectifiers or regulators that dump to ground and cause maximum stator current and higher temperatures

•Cycle Electric rectifying regulators block current to control voltage; this reduces stator current, resulting in low temperature and less drag on the motor, which means more efficient operation

•A lower-voltage style is available for Softail models with wraparound oil tanks to lower the heat level in the battery

•Made in the U.S.A.

2112-0144DS-313066

PRICE LIST

FOR BIG TWIN AND XL MODELS

FITS MODEL ACCEL BLACK ACCEL CHROME NESS CHROME OEM # AMPERAGE LEAD LENGTH89-99 80” Evolution Big Twin (32A) 201122B 201122C 211122 74519-88 32 51”81-88 Big Twin 201118-B 201118C - 74513-82, 74516-86 22 51”76-80 Big Twin 201101-B 201101C - 74510-75 17.8 57”70-75 Big Twin 201100-B 201100C - 74510-70A 15 38”65-69 FL; 65-77 XL 201104-B 201104C - All 12V 10 N/A92-93 XL - 201123C - 74523-92 22 N/A91 XL - 201123C - 74523-91 22 N/AL84-90 XL 201121-B 201121C - 74523-84A 19 51”82-E84 XL w/ generator 201117-B 201117C - 74504-82 13 5”78-81 XL, XLCH; 77-78 XLCR 201102-B 201102C - 74504-78 10 5”

SOLID STATE REGULATORS•High-reliability voltage regulators feature rugged aluminum alloy construction

•Also available is the “Accel/Arlen Ness Signature Series,” featuring a look only Arlen Ness could create

•All provide accurately regulated voltage under all electrical loads, have no relay contacts to wear or become maladjusted and are environmentally sealed for protection against moisture and shock

•Made in the U.S.A.

NOTE: 70-75 regulators do not have tach wires.201122C 201122B

211122

PART # DESCRIPTIONSUG.

RETAILDS-313033 For 89-99 Big

Twin models $121.95DS-313034 For 81-88 Big

Twin models 121.95

VOLTAGE REGULATORS•Deliver a full range of operating and charging with OEM charging system or any 26-32 amp alternator

•Double-plated nickel-chrome finish•Designed as a bolt-on replacement for 81-99 Big Twins (except Twin Cam 88)

•Made in the U.S.A.

DS-313033

PART # DESCRIPTIONSUG.

RETAILCHROME BILLETDS-313058 32A voltage regulator for

89-99 80” Evolution Big Twin; repl. OEM #74519-88A $155.95

BLACK FINNED0913-1703 38A voltage regulator

for 84-99 80” Evolution Big Twin 137.95

PART # DESCRIPTIONSUG.

RETAILBLACK FINNED (CONT)DS-313041 32A voltage regulator for

89-99 80” Evolution Big Twin (except 95-98 FLT) $109.95

DS-313042 22A voltage regulator for 81-88 Big Twin 119.95

DS-313046 22A voltage regulator for 91-00 XL 115.95

SERIES-TYPE REPLACEMENT VOLTAGE REGULATORS•New generation series regulators reduce load on stator and decrease engine drag

•When not charging, regulator goes to an open circuit, so there is no load on the stator or rotor

•Available in a chrome billet or black finned aluminum case

•Wire harness included•Made in the U.S.A.

0913-1703

DS-313058

PART # SUG. RETAIL201100-B $115.95201100C 141.95201101-B 109.95201101C 115.95

PART # SUG. RETAIL201102-B $106.95201102C 115.95201104-B 99.95201104C 106.95

PART # SUG. RETAIL201117-B $110.95201117C 118.95201118-B 115.95201118C 119.95

PART # SUG. RETAIL201121-B $105.95201121C 123.95201122B 135.95201122C 167.95

PART # SUG. RETAIL201123C $135.95211122 155.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

622

PART # DESCRIPTION SUG. RETAILDS-325463 For 97-08 FLT, FLHT, FLTR and FLHR models $75.95

REGULATOR WIRING COVER•This beautifully designed, chrome-plated cover fits perfectly over the OEM regulator wiring

•Machined slots allow a stream of cool air to reach the motor•Easy to install; mounting hardware included•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR ALL EVOLUTION BIG TWIN MODELSDS-222835 Chrome $45.95DS-222843 Black 45.95

REGULATOR PLUG GUARD•Designed to keep the regulator from unplugging from the stator

•Cast aluminum with a chrome or black finish

•Easy bolt-on design, no drilling required

•Includes mounting hardware•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR ALL XL GENERATORS AND BIG TWIN GENERATORS WITH UPDATED END PLATE (FOUR HOLE)DS-325483 12V standard regulator $151.95DS-313070 12V low output regulator 151.95DS-325484 6V standard regulator 157.95DS-325485 Updated end plate (four mounting holes) 33.95

GENERATOR-MOUNTED REGULATORS•Available in 6V or 12V applications in a black finish

•Updated end plate has an extra set of mounting holes to align the fins on the regulator with the fins on the engine

•If you have purchased a Cycle Electric generator since 1984 it may have the four-hole end plate

•Updated end plates are available separately if your current generator is not equipped with one (comes complete with bearing and seal)

•12V regulators are available in a standard or low output style (for use with small batteries in wraparound oil tanks)

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILCHROME201105C 12V regulator for 65-69 FL and FLH; 67-78 XLH; 67-73 Servi-Car;

repl. OEM #74510-64 $107.95201107C 12V regulator for 65-66 XLH and 65-77 XLCH; repl. OEM #74511-65 81.95201106C 6V regulator for 58-64 FL and FLH; 52-64 K, XL and XLH; 63-66 125cc,

165cc and 175cc; repl. OEM #74510-47A, chrome 80.95BLACK201107 12V regulator for 65-66 XLH and 65-77 XLCH; repl. OEM #74511-65 63.95

6V AND 12V REGULATORS•Feature a heavy-duty, shock-mounted steel base with vibration-resistant internal wire connections, fiber and Mylar® insulating pads and large-diameter contact surfaces

•Available in gloss black OEM-style or chrome-plated cover•Made in the U.S.A.NOTE: B battery; DF field; D armature; 61 horn condenser.

PART # DESCRIPTION SUG. RETAILDS-325496 For 65-69 FL,

FLH 67-78 XLH; repl. OEM #74510-64 $52.95

12V REGULATOR•Vibration-resistant internal wire connections, fiber and Mylar® insulating pads and large-diameter contact surfaces

•Made in the U.S.A.

201105C 201107C

DS-325483 DS-325485

DS-222835 DS-222843

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

PART # DESCRIPTION SUG. RETAIL2112-0102 For 97-08 FLHT, FLTR

and FLHR models $69.95

REGULATOR COVER•Two-piece, stamped-steel chrome-plated cover fits the stock regulator

•Open, well-vented design keeps things running cool

•Functional, decorative fasteners add a custom touch

•Vented cover has room inside to add lights for a cool accent

PART # DESCRIPTIONSUG.

RETAIL1902-0398 For 01-06 FXST/FLST models;

repl. OEM #74610-01 $22.957805-0012 For 89-99 FXST/FLST models;

repl. OEM #74578-97 25.957805-0013 For 91-03 FXD models; repl.

OEM #74577-97 25.957805-0076 For 91-03 XL; repl.

OEM #74579-97 24.95

CHROME REGULATOR COVERS•Stamped steel cover fits over the existing regulator

•Includes chrome mounting hardware

PART # DESCRIPTION SUG. RETAIL2112-0297 For 37-99 Big

Twin models $94.95

REGULATOR MOUNT•Machined from billet aluminum, then finished in chrome

•Fits most frames on front motor mount

RICHIE’S REGULATOR MOUNT•Replaces the ugly stock mount•Aluminum construction with a plain finish

PART # DESCRIPTION SUG. RETAIL2130-0003 For 00-05 Twin

Cam motors $39.95

PART # DESCRIPTIONSUG.

RETAIL151100 Regulator cover/

visor for 4-speed Big Twin (ea.) $28.95

REGULATOR BRACKET•Polished bracket mounts solid-state regulators to all 1200cc and 1340cc H-D 4-speed models

•Attaches to front motor mount bolts

PART # DESCRIPTION SUG. RETAILDS-330023 Regulator brackets for

76-85 FX and FL; 80-86 FXWG; repl. OEM #74533-75B $16.95

REGULATOR BRACKET•No drilling is required to mount this heavy-gauge, chrome-plated steel regulator bracket

•Exact replacement for the stock regulator mounting bracket

NOTE: When converting regulators on 70-75 models to a Dragtronic™ or Accel regulator, use our bracket, DS-330023.

PART # DESCRIPTION SUG. RETAILDS-720018 For 36-99 rigid mount motors $45.95

CUSTOM REGULATOR MOUNT•Allows the regulator to be mounted down and back out of sight

•Highly chromed aluminum gives a great custom look•Requires two 1/4”-20 x 1/2” bolts for installing regulator mount and two 3/8”-16 x 23/4” bolts for installing mount to the frame

•Optional 10-24 holes on back of mount for ground wire

NOTE: May require removal of the oil filter for installation.

PART # DESCRIPTIONSUG.

RETAIL2112-0298 Front

motor mount rectifier bracket $42.95

FRONT MOTOR MOUNT RECTIFIER BRACKET•Allows installation of rectifier on front motor mount on all 37-99 Big Twins

•Lazer and formed mild-steel•Relocation of rectifier allows air to cool fins

PART # DESCRIPTION SUG. RETAILDS-330006 For 80-95 FLT and 82-94

and 99 FXR models; repl. OEM #74529-79T $14.95

CHROME REGULATOR MOUNT FOR RUBBER-MOUNTED MOTORS•Chrome regulator mount made of heavy-duty steel•Dual holes for custom applications

PART # DESCRIPTION SUG. RETAILDS-330003 Regulator mount $71.95

REGULATOR MOUNT•Chrome billet aluminum mount from Accutronix® allows custom mounting of regulators for a clean, smooth look

•Attaches to the front motor mount bolts on all 70- and newer 4-speed Big Twin models

•Made in the U.S.A.

1902-0398

7805-0076

623

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

624

DRAG SPECIALTIESPART #

YUASA BATTERYPART #

HARLEY-DAVIDSONOEM #

COLD CRANKING AMPS

REPL. HARDWARE (5 PK) LENGTH WIDTH HEIGHT

TERMINALCONFIGURATION

2113-0007 Y12N7-4A 6606-70 - 2113-0079 55/16” 3” 51/4” + -2113-0008 YHD12 66007-84 - 2113-0080 81/8” 51/4” 61/2” + -2113-0009 YTX14 65948-00 200 2113-0084 6” 37/16” 53/4” + -2113-0010 YIX30L 66010-97A 385 2113-0085 69/16” 5” 67/8” - +2113-0011 YTX20H-BS 65991-82B 310 2113-0082 67/8” 37/16” 61/8” + -2113-0012 YTX20HL-BS 65989-97A 310 2113-0082 67/8” 37/16” 61/8” - +2113-0013 YTX24HL-BS 66010-82B 350 2113-0082 81/8” 37/16” 63/8” - +2113-0014 YTX14L-BS 65958-04 200 2113-0085 6” 37/16” 53/4” - +

DRAG SPECIALTIES BATTERY CROSS REFERENCE

PART # SUG. RETAILBATTERIES2113-0007 $41.952113-0008 99.952113-0009 87.95

PART # SUG. RETAILBATTERIES (CONT)2113-0010 $137.952113-0011 105.952113-0012 105.95

PART # SUG. RETAILBATTERIES (CONT)2113-0013 $119.952113-0014 88.95

PART # SUG. RETAILREPL. HARDWARE (EACH)2113-0079 $1.102113-0080 1.102113-0082 2.40

PART # SUG. RETAILREPL. HARDWARE (EACH) (CONT)2113-0084 $2.002113-0085 2.40

PRICE LIST

DESCRIPTION PART #07-09 V-Rod VRSCA/D/DX/CX 2113-001202-06 V-Rod, 07 VRSCR 2113-000970-78 XLCH; 71-78 FX (kick start) 2113-00071

65-84 FL, FLH; 67-78 XLH 2113-00081

91-09 FXD, FXDWG, FXST, FLST 2113-001286-90 FLST; 84-90 FXST; 73-85 FXE 2113-001197-09 FLT, FLHT, FLTR, FLHR 2113-001080-96 FLT, FLHT 2113-001382-94 FXR 2113-001104-09 XL 2113-001497-03 XL 2113-001279-96 XL 2113-0011

BUELL96-99 S1, 00-07 Blast2 2113-000994-96 S2, S2T Thunderbolt, 88-90 RR1200, 89-93 RS1200, 91-93 RSS1200, 87 RR1000 2113-001194-02 S3, S3T Thunderbolt, M2 Cyclone, X1 Lightning 2113-00121 Not spill-proof design. Acid not included.2 Requires battery adapter kit from Buell.

DRAG SPECIALTIES BATTERIES•Specifically designed for high-performance engines that need extra cranking power•Superior engineering features include a radial grid design for maximum cranking amps•High vibration resistance•Spill-proof, pre-filled, pre-charged, maintenance-free sealed design (unless noted)•Now featuring brass spacers, stainless steel nuts, bolts and star washers•Made in the U.S.A.

2113-0007

2113-0009

2113-0010

2113-0011

2113-0013

2113-0012

2113-0014

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

PRICE LIST

DESCRIPTIONHIGH PERFORMANCEMAINTENANCE-FREE

GRT MAINT.-FREE CONVENTIONAL YUMICRON CX CONVENTIONAL HEAVY-DUTY

12V Custom appl. - - Y12N5.5A-3B - - R12N5.5A-3B -70-78 XLCH; 71-78 FX (kick) - - Y12N7-4A YB7-A - R12N7-4A RCB7A65-84 FL, FLH; 76-78 XLH - - YHD-12 - - RCHD4-12 -91-09 FXST/FLST, Dyna Glide YTX20HL-BS YTX20L-BS - - YB16HL-A-CX 2113-00221 -86-90 FLST, 84-90 FXST, 73-85 FXE YTX20H-BS YTX-20BS - YB16-B YB16-B-CX 2113-00211 -80-96 FLT, FLHT YTX24HL-BS YTX24HL - Y50-N18L-A Y50-N18L-A-CX - RC50-N18L-A297-09 FLT, FLHT - YIX30L - YB30L-B - - RCB30L-B82-94 FXR YTX20H-BS YTX-20BS - YB16-B YB16-B-CX 2113-00211 RCB16-B79-96 XL/XLH YTX20H-BS YTX-20BS - YB16-B YB16-B-CX 2113-00211 RCB16-B97-03 XL YTX20HL-BS YTX20L-BS - - - 2113-00221 -04-09 XL - 2113-0016 - - - - -1 RT Series maintenance-free battery.

BATTERY APPLICATIONS CHART

PARTS UNLIMITED

YUASA BATTERIES•The largest motorcycle battery manufacturer in the world

•Over 50 years of engineering expertise ensures high-quality construction for long and trouble-free service

HIGH-PERFORMANCE MAINTENANCE-FREE BATTERIES•This new generation of maintenance-free batteries delivers higher cranking amps for vehicles that require extra starting power

•Additional cranking amps make these the most powerful batteries on the market

GRT MAINTENANCE-FREE•Battery seals permanently after being filled with acid (supplied)

•Lead/calcium design holds its specific gravity more than three times longer than conventional lead antimony batteries; gives you much longer times between charges during storage

•Gas Recombination Technology (GRT) eliminates water loss

GRT MAINTENANCE-FREE NON-SPILLABLE•No acid pack required•Nonhazardous shipping•Ready to go•These batteries require stock rotation

YUMICRON•The most powerful lead-acid battery of its size•Appears as original equipment on more and more big bikes

YUMICRON CX•Lead/calcium battery has 5% to 8% more cranking power than the high-output YuMicron

•Requires minimal servicing

PARTS UNLIMITED•Superior batteries at economical prices•Conventional and heavy-duty batteries available for most applications

625

POWER MAX MAINTENANCE-FREE BATTERY•Completely sealed black case can be mounted in almost any position•Advanced technology allows very high power discharge•Accepts a high rate of recharge without damage to the battery•Can be recharged over 90% in less than one hour on a regulated charger•Batteries MUST BE CHARGED in the same manner as any lead acid battery•When not in service, batteries should be charged once a month•PART #S DS-325024 and DS-325030 measure 67/8” L x 37/16” W x 61/8” H

NOTE: PART #DS-325757 will not fit 80-84 FLH models.

DESCRIPTION PART # YUASA REF. # SUG. RETAIL91-09 FXST/FLST, 97-09 FXD/FXDWG, 97-03 XL DS-325024 YTX20L-BS $122.9584-90 FXST/FLST, 82-94 FXR, 73-85 FXE, 79-96 XL DS-325030 YTX20-BS 122.9580-96 FLT/FLHT DS-325757 Y50-N18L-A 151.95

PART # SUG. RETAIL2113-0016 $96.952113-0021 96.952113-0022 96.95R12N5.5A-3B 29.95R12N7-4A 34.95RC50-N18L-A2 67.95RCB16-B 64.95

PART # SUG. RETAILRCB30L-B $96.95RCB7A 43.95RCHD4-12 92.95Y12N5.5A-3B 38.95Y12N7-4A 42.95Y50-N18L-A 75.95Y50-N18L-A-CX 94.95

PART # SUG. RETAILYB16-B $72.95YB16-B-CX 89.95YB16HL-A-CX 89.95YB30L-B 106.95YB7-A 58.95YHD-12 108.95YIX30L 148.95

PART # SUG. RETAILYTX-20BS $105.95YTX20H-BS 113.95YTX20HL-BS 113.95YTX20L-BS 105.95YTX24HL 132.95YTX24HL-BS 129.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

626

BATTERY CABLE KITS•4-gauge cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and superior flexibility

•Increase starter performance by supplying maximum battery current to the starter motor

•Contain all battery cables to replace OEM cables•Available in translucent black and clear•Made in the U.S.A. CUSTOM CABLE KITS

•Build custom-length cables for an exact fit•Each kit contains the following: 25’ cable (1), 1/4” terminals (20),

3/8” terminals (8), 5/16” terminals (12), black heat shrink (40) and red heat shrink (12)

•Using 12” cables as an example, this 25’ custom cable kit will make 27 cables (a 12” cable uses 11” of cable and two terminal ends), for a substantial savings over precut lengths

•Available in clear, black and red•Made in the U.S.A.

BATTERY CABLES•Increase starter performance by supplying maximum battery current to the starter motor

•4-gauge cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and flexibility

•Specially rated 125° C, oil- and grease-resistant, ultra-flexible translucent jacket guarantees excellent performance (available in translucent black and clear)

•All cables manufactured with 11/4” terminal and 15/16” terminal•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILCLEAR79-3001 For 84-88 FXST, FLST; cable lengths 8”, 15” and 17” $39.9579-3002 For 89-07 FXST, FLST; cable lengths 10” and 12” 27.9579-3003 For 82-88 FXR; cable lengths 12”, 16” and 16” 39.9579-3005 For 91-05 FXD; cable lengths 10” and 15” 27.9579-3006 For 65-79 FLH, FL; cable lengths 9”, 16” and 16” 39.9579-3008 For 89-92 FLHT, FLT; cable lengths 33” and 33” 39.9579-3009 For 93-06 FLHT, FLT; cable lengths 13” and 14” 27.9579-3010 For 81-03 XL; cable lengths 11” and 16” 27.95TRANSLUCENT BLACK79-3001-1 For 84-88 FXST, FLST; cable lengths 8”, 15” and 17” 39.9579-3002-1 For 89-07 FXST, FLST; cable lengths 10” and 12” 27.9579-3003-1 For 82-88 FXR; cable lengths 12”, 16” and 16” 39.9579-3004-1 For 89-94 FXR; cable lengths 12” and 16” 27.9579-3005-1 For 91-05 FXD; cable lengths 10” and 15” 27.9579-3006-1 For 65-79 FLH, FL; cable lengths 9”, 16” and 16” 39.9579-3007-1 For 80-88 FLHT, FLT; cable lengths 9”, 30” and 30” 44.9579-3008-1 For 89-92 FLHT, FLT; cable lengths 33” and 33” 39.9579-3009-1 For 93-06 FLHT, FLT; cable lengths 13” and 14” 27.9579-3010-1 For 81-03 XL; cable lengths 11” and 16” 27.95

PART # DESCRIPTION SUG. RETAILCUSTOM CABLE KITS79-3303 Clear kit $195.9579-3303-1 Translucent black kit 195.9579-3303-2 Translucent red kit 195.95CABLE AND HARDWARE REPLACEMENTS/TOOLS2113-0039 25’ clear bulk cable 109.952113-0040 25’ translucent black bulk cable 109.9599-1007 1/4” terminals (25-pk.) 1.5099-1008 5/16” terminals (25-pk.) 1.5099-1009 3/8” terminals (25-pk.) 1.5099-1012 Crimper tool 55.95

79-3002

79-3009-1

99-1012

79-3303

78-108

78-108-1

PART # DESCRIPTION SUG. RETAILTRANSLUCENT CLEAR78-107 7” $8.9578-108 8” 9.9578-109 9” 11.9578-110 10” 12.9578-111 11” 14.9578-112 12” 15.9578-113 13” 17.9578-114 14” 18.9578-115 15” 20.9578-116 16” 21.9578-117 17” 23.9578-119 19” 24.9578-121 21” 26.9578-123 23” 27.9578-125 25” 29.9578-130 30” 31.9578-133 33” 34.95

PART # DESCRIPTION SUG. RETAILTRANSLUCENT BLACK78-107-1 7” $8.9578-108-1 8” 9.9578-109-1 9” 11.9578-110-1 10” 12.9578-111-1 11” 14.9578-112-1 12” 15.9578-113-1 13” 17.9578-114-1 14” 18.9578-115-1 15” 20.9578-116-1 16” 21.9578-117-1 17” 23.9578-119-1 19” 24.9578-121-1 21” 26.9578-123-1 23” 27.9578-125-1 25” 29.9578-130-1 30” 32.9578-133-1 33” 34.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERALPART # DESCRIPTION SUG. RETAIL2113-0077 Battery pad $2.95

BATTERY PAD•1/8” low-density neoprene with pressure sensitive, removable liner on one side that exposes the adhesive for contact

•Pad is oversized so it can be trimmed into a top or bottom pad to fit all applications

•Can be cut into irregular shapes for anti vibration padding, seat bottoms, dash panels etc.

•Measures 5” x 8”

PARTY # DESCRIPTIONSUG.

RETAILDS-310480 For 85-94 and

L95-96 FXST, FLST; repl. OEM #66210-85B $6.95

OEM-STYLE BATTERY CUSHION•Rubber battery cushion is acid-, oil- and heat-resistant

•Sold each

PART # DESCRIPTION SUG. RETAILDS-174935 Bottom pads for 74-E85 FX, FXWG,

FXST; 83-84 FXR; 82-96 XL; repl. OEM #66103-74A (6.5” L x 3.875” W) $3.95

DS-174936 Top/bottom pads for 1915-64 models w/ 6V battery repl. OEM #66100-15 (3.5” x 4”) 3.95

DS-174937 Top/bottom pads for 52-64 K/KH models; repl. OEM #66100-52 (3.5” x 4”) 2.95

DS-174938 Top cover pads for 65-84 FL/FLH models; repl. OEM #66352-65 (1” x 1”) 1.95

BATTERY PADS•Top-quality pads absorb vibration and retain their shape

•Available in top and bottom styles

•Made in the U.S.A.•Sold in 10-pk.

PART # DESCRIPTION SUG. RETAIL7805-3020 For 89-07 FXST/FLST models 10”/12” $59.952113-0017 For 91-05 FXD/FXDWG models 10”/15”/8” 89.957805-3022 For 89-94 FXR models 12”/16” 61.952113-0018 For 93-06 FLHT/FLT models 13”/14”/8” 90.957805-3024 For 81-03 XL models 11”/16” 63.952113-0019 For 04-07 XL models 12”/13” 60.95

“EXTREME” DUTY BATTERY CABLES•Flexible #2 gauge, 2,000-strand copper wire•180A rating•Black rubber-coated cables feature copper-coated tin lugs with glued heat-shrink sleeves to prevent corrosion

•Made in the U.S.A.

PART # CABLE LENGTH SUG. RETAILPOSITIVE BATTERY CABLE2113-0054 6” $19.952113-0055 8” 21.952113-0056 10” 26.952113-0057 12” 31.952113-0058 14” 35.952113-0059 16” 40.952113-0060 18” 45.95

PART # CABLE LENGTH SUG. RETAILNEGATIVE BATTERY CABLE2113-0061 6” $19.952113-0062 8” 21.952113-0063 10” 26.952113-0064 12” 31.952113-0065 14” 35.952113-0066 16” 40.952113-0067 18” 45.95

BATTERY CABLE WITH AUXILIARY WIRE•The perfect choice when doing custom wiring work•Positive battery cable with auxiliary wire eliminates stacking cables on the battery•Perfect for wiring directly to the terminal block, regulator or any accessory•Positive cable is 18K gold-plated and tinned copper 1666 strand Mega Cable•Auxiliary wire is 12-gauge tinned copper 259 strand Mega Cable•Negative battery cable is the perfect solution for the ground wire on custom bikes•Eliminates poor electrical ground•Install the 4-gauge wire to the transmission and the 12-gauge wire to any accessory for the ground•Auxiliary wire measures 12” L on both positive and negative battery cable wires

BLACK DESCRIPTION CABLE LENGTHS SUG. RETAILDS-242131 89-07 Softail models 10”/12” $42.95DS-242134 84-88 Softail models 8”/15”/17” 61.952113-0032 93-06 FLT, FLHT models 13”/14”/8” 61.95DS-242136 89-92 FLT models 33”/33” 66.95DS-242137 80-88 FLT models 9”/30”/30” 66.95DS-242138 65-79 FL models 9”/16”/16” 61.95DS-242141 91-05 Dyna models 10”/15” 46.95DS-242139 89-94 FXR models 12”/16” 42.95DS-242140 82-94 FXR models 12”/16”/16” 61.95DS-242144 81-03 XL models 11”/16” 42.952113-0033 04-07 XL models 13”/14” 42.95

PART # LENGTH SUG. RETAIL2113-0035 5” $12.952113-0036 6” 12.95DS-242057 7” 14.95DS-242058 8” 15.95DS-242059 9” 17.95DS-242060 10” 19.95DS-242061 11” 22.95DS-242062 12” 24.95DS-242063 13” 27.95DS-242064 14” 29.95

PART # LENGTH SUG. RETAILDS-242065 15” $31.95DS-242066 16” 33.95DS-242067 17” 36.952113-0037 18” 38.95DS-241966 19” 40.952113-0038 20” 43.95DS-241950 21” 45.95DS-241954 23” 47.95DS-242068 25” 49.95DS-242069 32” 55.95

INDIVIDUAL CABLES (BLACK)COMPLETE KITS

BATTERY CABLES•Manufactured from 4-gauge, 1,650-strand tinned copper wire with a super flexible silicone jacket•Unique lug design (99.9% pure electrolytic copper) provides a positive connection with greater conductivity and dependable service

•These cables will deliver more cranking power with less voltage drop than any cable on the market today•Available in black•Cables are available in kits or individually•Kits include cables for required stock applications•Individual cables can be used for universal/custom positive or negative applications•Made in the U.S.A.

2113-0054

2113-0061

DS-174936 DS-174937

DS-174935 DS-174938

627

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

628

PART # DESCRIPTION SUG. RETAILFOR CUSTOM APPLICATIONS2113-0041 Smooth $235.952113-0042 Holes 255.95

PART # DESCRIPTION SUG. RETAIL151308 Battery eliminator $38.95

BATTERY ELIMINATOR•Boosts spark voltage at cranking; eliminates flickering lights at low engine speed

•Designed for use on generator models only, this kit comes complete with a shock-resistant mounting clamp and attachment hardware

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDVM-1 Dyna voltage monitor $49.95

VOLTAGE MONITOR•Allows the user to track battery voltage•Primary use is determining when to recharge a battery in a total loss application; commonly found in drag racing

•When the green light is on, the battery is fully charged; when the amber light is on, there is still sufficient voltage to operate the ignition and other accessories; when the red light is on, the battery should be charged as soon as possible

•Measures 15/8” L x 11/8” W x 1/2” H

PART # DESCRIPTION SUG. RETAILOCM-1 Dyna charge monitor $49.95

CHARGE MONITOR•Allows user to track electrical system voltage on any vehicle with a normal 12V charging system

•When the “normal” green light is on, the system voltage is normal and the battery is being charged correctly; if the “high” red light is on, the system voltage is too high and damage to the battery may result; when the “low” red light is on, the system voltage is too low and the battery is being discharged

•The above indications are only valid with the engine running•Measures 15/8” L x 1” W x 1/2” H

PART # DESCRIPTION SUG. RETAILP607 Battery acid catch tank $6.95

BATTERY ACID CATCH TANK•Prevents corrosive battery acid overflow onto chrome or painted surfaces while still providing proper venting

•May be mounted anywhere near battery, such as along frame rail

•High-impact plastic catch tank is 3/4” dia. x 4” long

•Includes cable ties and tubing

PART # DESCRIPTION SUG. RETAILDS-189035 15A fuse holder (ea.) $4.95

UNIVERSAL FUSE HOLDER•Rated at 15A; 15A fuse included•Sold each

PART # DESCRIPTION SUG. RETAIL2120-0220 Fuse holder $11.95

FUSE HOLDER•Standard ATC 4-way fuse holder with a clear water-tight (sealed) cover

•50-Amp max for all branches

•.250 male blade (side blade insertion)•Mounting holes center-to-center are 2.56”•Mounting hole diameter is 7/32”•Made in the U.S.A.

LED BATTERY GAUGE•Lets you know if your motorcycle’s charging system is working with just a glance

•Green LED indicates normal operating range of 12.5 to 14.5V

•Amber LED warns the bike is not charging•If reading drops below 10V or exceeds 15V, flashing red LED alerts the rider

•Simple two-wire connection•Gauge measures approximately 2” L x 3/4” W x

3/16” H; daylight sensor automatically adjusts LED brightness

PART # DESCRIPTION SUG. RETAIL2212-0029 Black $37.952212-0030 Chrome 39.95

2212-0029

2113-00412113-0042

2212-0030

DELISLE BATTERY BOXES•Machined billet aluminum battery boxes accept batteries that measure 35/16” x 67/8” or smaller

•Available in smooth or holes style with a stainless mesh filler

•Polished finish•Includes hardware•Made in the U.S.A.

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

629

BATTERY COVERS•Feature precise formed covers for sealed and conventional batteries

NOTE: The use of AGM sealed maintenance-free batteries requires battery side covers designed for the AGM battery.

PART # DESCRIPTION SUG. RETAILDS-324112 For 97-05 FXD, 97-03 XL; repl. OEM #66718-01 (AGM battery only) $21.95DS-324126 For 97-05 FXD, 99-04 FXDX, 01-03 FXDXT; repl. OEM #66375-97 21.95DS-324100 For 91-96 FXD, 73-85 FXE, 82-99 XL; repl. OEM #66347-91, raised panel (viewing window) 21.95DS-324104 For 91-96 FXD, 73-85 FXE, 80-86 FXWG, 82-99 XL; repl. OEM #66347-91, smooth panel (viewing window ) 17.95DS-324106 For 71-78 FX, 70-78 XLCH; repl. OEM #66072-83T (viewing window) 17.95DS-324107 For 80-81 XL; repl. OEM #66072-83T 17.95DS-324117 For 67-78 XLH 22.95

DS-324112DS-324126

DS-324100

DS-324104DS-324106

DS-324107

DS-324117

BATTERY TOP COVERS•Chromed replacement battery top covers fit precisely and feature vibration-absorbing cushions

DS-324115

DS-324119 DS-324114

DS-324118

DS-324120 DS-324123

DS-324116

BATTERY STRAPS•High-quality replacement battery straps are manufactured from 18-gauge stainless steel

•Meet or exceed OEM specifications

DS-317466

DS-317465

DS-317461

DS-317462DS-317463

PART # DESCRIPTION SUG. RETAILDS-324120 Battery top cover for 71-78 FX; 70-78 XLCH; repl. OEM #66369-70 $13.95DS-324119 Battery top cover for 97-05 FXD; repl. OEM #66368-97 15.95DS-324114 Battery top cover for 91-96 FXD; repl. OEM #66368-90 15.95DS-324118 Battery top cover for 73-85 FXE; 80-86 FXWG; 82-96 XL; repl. OEM #66367-73 15.95DS-324116 Battery top cover for 65-84 FLH; repl. OEM #66370-65 16.95DS-324115 Battery top cover for 97-03 XL; repl. OEM #66367-97 15.95DS-324123 Battery top cover for 67-78 XLH; repl. OEM #s 66368-67, 66369-67 19.95

PART # DESCRIPTION SUG. RETAILDS-317466 2-piece battery strap (rubber) for 84-99 FXST, FLST; repl. OEM #66109-93 and 66111-93 $9.95DS-317465 Battery strap (rubber) for 84-99 FXST, FLST, 80-92 FLT, FLHT; 77-78 XLCR; 79 XL; repl. OEM #66105-77 6.95DS-317463 Battery strap for 70-78 FX, XLCH; repl. OEM #66470-70 13.95DS-317468 Battery strap for 73-85 FXE; 80-86 FXWG; 82-97 XL; repl. OEM #66476-73/73A 13.95DS-317462 Battery strap for 70-84 FL, FLH; repl. OEM #66383-70 13.95DS-317469 Battery strap for 98-03 XL; repl. OEM #66476-98 13.95DS-317461 Battery strap for 67-78 XLH; repl. OEM #66470-67 13.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

630

MINI-BEAST II AIR HORN•Self-contained air horn fits most H-D motorcycles

•Features new cover made from chrome steel and new shape

•Dual trumpets emit 128 dB

•Plug-n-play wiring harness for easy installation

PART # DESCRIPTION SUG. RETAIL2107-0030 Mini-Beast II air horn $159.95

MINI-BEAST AIR HORN•Self-contained air horn fits most H-D motorcycles

•Dual trumpets emit 128 dB•Plug-n-play wiring harness for easy installation

•Chrome plastic cover features V-shaped sound slots and steel brackets

PART # DESCRIPTION SUG. RETAIL2107-0024 Mini-Beast air horn $140.95

DYNAMIC DUO AIR HORN KITS•Dual trumpet air horn set•Command attention; loudest horns available•Beautifully chrome-plated horns with black powder-coated brackets

•Kits are complete, including compressor and braided stainless air line

•Compressor mounts under stock chrome horn cover

•Include Nose Cone Dirt Guards•Will not fit with fairing lowers•Made in the U.S.A.

PART # DESCRIPTION SUG.RETAIL2107-0006 For 99-09 Twin Cam $156.952107-0005 For 92-99 Evolution (except FXR models) 156.95

2107-00052107-0005

HORNS WITH CHROME COVERS•Fiamm horn with show-chrome cover•Mounts to stock horn mounts on any H-D with “cow bell” horn

PART # DESCRIPTION SUG. RETAIL2107-0031 Horn w/ skull cover $121.952107-0032 Horn w/ skull and flames cover 121.952107-0033 Horn w/ flames cover 121.952107-0034 Horn w/ POW/MIA cover 121.95

2107-0031

2107-0032

2107-0033 2107-0034

CHROME HORNS•12V horns emit loud (113 dB) signal•4” in diameter; universal mount•Sold each

PART # DESCRIPTION SUG. RETAILDS-271996 Slotted $24.95DS-271997 Mag 24.95

DS-271996

DS-271997

CHROME MINI HORN•Small horn can be mounted out of sight

•Stamped steel construction with a chrome finish and slotted face look great

•12V operation; fully adjustable universal mount•Include-chrome 31/4” mounting strap

PART # DESCRIPTION SUG. RETAIL2107-0010 21/2” slotted chrome horn $14.95

PART # DESCRIPTION SUG. RETAIL2107-0007 2-terminal, 3” dia. $11.952107-0008 2-terminal, 90dB at 1.5A, 21/2” dia. 5.952107-0020 2-terminal, 100dB at 1.5A, 21/2” dia. 5.952107-0021 2-terminal, 115dB at 3A, 4” dia. 11.95

12V HORNS•Loud, deep-toned 12V two-terminal chrome horns

2107-0007 2107-0008

2107-0020

2107-0021

ECONOMY HORNS•Add style and safety to your bike

•Both are just 23/4” in diameter, but emit a loud 105 dB; 12V

•Small enough to mount almost anywhere•Sold each

PART # DESCRIPTION SUG. RETAILK11-0100 Black $9.95K11-0101 Chrome 10.95

K11-0100

K11-0101

PART # DESCRIPTION SUG. RETAILDS-280610 Round horn w/ billet cover $79.95

ROUND HORN WITH CHROME COVER•12V horn can be mounted in a variety of locations

•Cover features billet aluminum construction with a slotted design

•Includes mounting hardware•Made in the U.S.A.

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

12V HORN WITH CHROME COVER•Custom horn comes with snap-on chrome cover

•Features spade-type terminal connectors and injection-molded cover

PART # DESCRIPTION SUG. RETAILDS-272127 12V horn $24.95

CHROME ELECTRIC HORN•A durable high-pitched, 12V horn that comes with a mounting flange

•Features highly chromed finish and universal mount

PART # DESCRIPTION SUG. RETAILDS-272111 Chrome electric horn $18.95

ELECTRIC HORNS•Chromed twin horns with a relay•Produce sound levels comparable to those of a semi’s horn (approximately 107 dB)

•12V horn fits all motorcycles and comes with mounting hardware

•Sold in sets

PART # DESCRIPTION SUG. RETAILDS-272128 Electric horns $42.95

FINNED HORN•Unique style allows the engine to show through the teardrop silhouette

•Chrome-plated billet aluminum construction•Includes 100 dB horn•Matching air cleaner kits available separately

PART # DESCRIPTION SUG. RETAILFOR ALL BIG TWIN/XL MODELS WITH ENGINE-MOUNTED HORN2107-0009 Chrome finned horn $224.95

REPLICA HORN•A reproduction of the “no longer available” early H-D 12V horn with a chrome front that came standard on 42-52 45”, 42-49 61” and 74”; and 53-54 Servi-Car models

•Comes with mounting bracket

PART # DESCRIPTION SUG. RETAILDS-272123 For restoration or installation on late-model

Glides and customs; repl. OEM #69001-42 $29.95

SKULL HORN COVER•ABS chromed cover replaces the stock “cowbell” style cover

•Sold each

PART # DESCRIPTION SUG. RETAIL2107-0027 For 91-09 models with “cowbell” style horn cover $49.95

V-SHIELD HORN COVER•For use with horns that are located between the cylinders

•Beautiful chrome finish

PART # DESCRIPTION SUG. RETAIL2107-0013 For 92-09 Big Twin $69.95

HORN COVERS•Steel construction finished in chrome or black-powder coat; diameter of approximately 45/8”

•Contrasting screen detail in maltese or skull design•Round horn covers replace the stock “cowbell” cover found on most 91-09 Big Twin and XL models

PART # DESCRIPTION SUG. RETAILCHROME COVERS2107-0025 Black skull insert $31.952107-0026 Black cross insert 31.95BLACK COVERS2107-0028 Chrome skull insert 29.952107-0029 Chrome cross insert 29.95

2107-0025 2107-0029

HORN COVERS•Quality chrome-plated billet aluminum construction•Available in four styles

PART # DESCRIPTION SUG. RETAILFOR 25/8” DIA. HORNS2107-0016 Crusader Maltese Cross $49.952107-0017 Reflections 49.952107-0018 Warrior 49.952107-0019 Smooth 49.95FOR 3” DIA. HORNS2107-0035 Crusader Maltese Cross 56.952107-0036 Ball-milled 56.952107-0037 Warrior 56.952107-0038 Smoothie 56.95

2107-0016

2107-0036

2107-0017 2107-0019

2107-0037

PART # DESCRIPTION SUG. RETAILFOR MOST OEM HORNS ON 91-09 BIG TWIN AND 91-09 XL MODELSDS-272130 Smooth chrome horn cover $34.95

SMOOTH HORN COVER•5” diameter with a chrome finish

631

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

632

CUSTOM ROUND KEY IGNITION SWITCH•Round key design with three-position activation: off, ignition only, or ignition and lights

•Sold individually

PART # DESCRIPTIONSUG.

RETAILDS-272112 For 77-85 FXS and FXS-80,

75-85 FX (except FXWG), 82-93 FXR and 79-93 XL models $22.95

ROUND KEY IGNITION SWITCH•Features the round key design found on all Dyna Glide models (except FXDWG)

•Two-position activation with a positive detent to retain the key in the off position

PART # DESCRIPTIONSUG.

RETAILDS-272113 Round key ignition switch

(ea.); repl. OEM #71428-90A $22.95

SIDE HINGE IGNITION SWITCH•Three-terminal ignition switch

PART # DESCRIPTIONSUG.

RETAILDS-272187 For 93-09 FXDWG, 96-09 FXST/

FLST and 94-09 FLHR models; repl. OEM #s 71501-93 and 71313-96 $29.95

IGNITION SWITCHES•Replacement ignition and light switches with locks for Fat Bob-style dash panels

•Available for both early and late models, these top-quality switches meet or exceed all OEM specifications

•Includes two flat keys

PART # DESCRIPTIONSUG.

RETAILDS-272098 Six-terminal ignition switch

for 73-95; repl. OEM #71501-73A (incl. late-model die-cast top and early “tin-” style cap) $24.95

DS-272097 Five-terminal ignition switch for 36-72; repl. OEM #71500-36A (incl. “tin-” style cap) 24.95

DS-272101 Repl. key for DS-272098 and DS-272097 3.95

ROUND KEY INTERNAL CONTACT SWITCH•Metal body construction with a chrome finish•Printed circuitry contacts with six-lug terminals•Includes two round keys

PART # DESCRIPTIONSUG.

RETAIL0909-0202 For 73-95 Fat Bob-style

dashes; repl. OEM # 71501-73A $38.95

SKULL IGNITION SWITCH•Replacementthree-terminal ignition switch

•Side hinge top features a unique chrome skull•Flat key design; includes two keys

PART # DESCRIPTIONSUG.

RETAIL2106-0038 For 93-09 FXDWG, 96-09 FXST/

FLST and 94-09 FLHR models; repl. OEM #s 71501-93 and 71313-96 $44.95

IGNITION/STARTER SWITCH•For custom applications•Switch has off/on/start; works like a car switch•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-272134 Ignition switch $28.95

PART # DESCRIPTION SUG. RETAIL2106-0031 Ignition switch w/ round key cover $132.952106-0060 Ignition switch w/ Dead End key cover 132.95

IGNITION/START SWITCHES•Features off/on/start just like a car ignition switch•Comes with billet key cover for a concealed look

2106-00312106-0060

IGNITION/STARTER SWITCH•Marine-grade ignition/starter switch for added water- and vibration-resistance

•Off/on/start (with return to run) works just like an automotive ignition

•Chrome billet retaining nut holds the switch firmly in place

PART # DESCRIPTION SUG. RETAIL2106-0016 Ignition/starter switch $53.95

PART # DESCRIPTION SUG. RETAIL2106-0055 Chrome $228.95

PART # DESCRIPTION SUG. RETAIL2106-0056 Black-anodized $228.95

IGNITION SWITCHES•CNC-machined aluminum with built-in starter relay and 30A breaker

•Three-way switch design: off/on/start•Measure 5” L; mounting holes are 31/2” on center•Made in the U.S.A.

2106-0055

2106-0056

IGNITION SWITCH•Chrome replacement ignition and light switch

PART # DESCRIPTION SUG. RETAILDS-272114 For 77-85 FXS and FXS-80; 75-85 FX (except FXWG); 82-93 FXR and

79-93 XL models; repl. OEM #71425-77 $15.95

DS-272098

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

633

UNIVERSAL IGNITION SWITCH•Handles 6 or 12V systems, has on/off/on positions and a 3/4” x 3/4” mounting stem

PART # DESCRIPTION SUG. RETAILDS-272108 Universal ignition switch $15.95

KEY SWITCHES•Ignition/Starter switch is marine-grade water- and vibration-resistant and features an OFF/ON/START function (with return to run), which works just like an automotive ignition

PART # DESCRIPTIONSUG.

RETAIL2106-0036 Ignition/Starter switch, black $44.952106-0037 Ignition key switch,

3-wire, chrome 15.95

2106-0036

2106-0037

WELD-ON KEY SWITCH ASSEMBLY•Sealed, water-tight switch•Flat key design•Includes a built-in starter relay•Welds onto 11/2” frame tube

PART # DESCRIPTION SUG. RETAIL2106-0007 Weld-on key switch $121.95

CUSTOM KEY IGNITION SWITCH COVERS•Chrome-plated billet aluminum construction

•Mounts on trimmed factory key

PART # DESCRIPTION SUG. RETAIL3550-0088 Crusader Cross $34.953550-0089 Warrior 34.95

3550-0088

3550-0089

CHROME IGNITION SWITCH COVER•Die-cast aluminum construction

•Provides protection from the weather and hides the lock from prying eyes

•Rotates to provide easy access to the lock

PART # DESCRIPTION SUG. RETAIL7805-0079 For 93-03 FLHT/FLTR;

repl. OEM #71663-99 $49.95

IGNITION SWITCH MOUNT•Chrome-plated ignition switch mount

•Features a 7/8” hole that accepts most ignition switches

•Mounts almost anywhere using a 5/16” mounting hole

PART # DESCRIPTION SUG. RETAIL2106-0041 Ignition switch mount $5.95

FORK LOCK COVER•Chrome-plated machined aluminum

•Cover rotates to provide access to fork lock; keeps grime out of lock

PART # DESCRIPTION SUG. RETAIL7805-1075 For 94-08 FLHR;

repl. OEM #71659-99 $39.95

VACUUM-OPERATED ELECTRICAL SWITCHES (VOES)•Available as stock OEM replacement or custom applications with mounting bracket

•Custom VOES are available with 3”, 4”, 5” and 6” HG activation

•Made in the U.S.A.; sold each

PART # DESCRIPTION SUG. RETAILOEM REPLACEMENT SWITCHES2101-0004 Repl. OEM 26558-84 $43.952101-0005 Repl. OEM 26557-83 43.952101-0006 Repl. OEM 26566-91 43.95CUSTOM SWITCHES2101-0007 3” HG switch 39.952101-0009 4” HG switch 39.952101-0010 5” HG switch 39.952101-0011 6” HG switch 35.95

2101-0004

2101-0007

COOLANT TEMPERATURE SENSOR•OEM replacement•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1022-0023 For 03-08 V-Rod models;

repl. OEM #32315-01 $17.95

PART # DESCRIPTIONSUG.

RETAILDS-272160 For 84-99 80” Evolution;

repl. OEM #26561-84 $10.95DS-272158 For 41-84 FL, FLHT, FLH-80,

80-83 FLT, FLHT, 82-83 FXR, FXRS, FXRT, 80 FXE, FXS, FXEF, FXB, FXWG; repl. OEM #26552-72 11.95

2106-0057 For 99-08 Dyna, FLHT, FLHR, FLTR, 00-08 FXST, FLST, 03-08 V-Rod models 10.95

DS-272159 For 77-08 XL; repl. OEM #26554-77 13.95

OIL PRESSURE SWITCHES•Precision-calibrated replacement oil pressure switches feature heavy contacts, brass pressure ferrules, thermo-plastic insulators and brightly finished steel shells

•Designed and tested to ensure consistently accurate pressure thresholds

•Made in the U.S.A.

DS-272160

DS-272158

DS-272159

PART # DESCRIPTION SUG. RETAILDS-244119 For 99-08 Twin Cam

models (except FLT w/ gauge) $39.95

OIL PRESSURE SWITCH COVER•Chrome-plated billet aluminum•Flat sided for lifter cover clearance

•Held in place by setscrew•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-272197 For 84-99 80” Big Twins

(single-terminal sending unit) $29.95

OIL PRESSURE SENDING UNIT COVER•High-quality, chromed, die-cast cover•Requires the sending unit to be removed for installation

•For single-terminal gauge-style sending units•Includes an upper and lower cover for complete coverage

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

634

THE DETAIL•The coolest neutral switch hole plug ever

•Solid stainless steel construction

•Screws right in and looks great

PART # DESCRIPTION SUG. RETAIL1105-0004 For 5-speed Big

Twin transmissions $39.95

NEUTRAL SWITCH HOLE PLUG•Chrome plug is designed to replace the neutral switch in all 5-speed Big Twin transmission top covers

•Includes the plastic sealing washer for all 80-97 transmissions, the O-ring for 98-99 transmissions, and chrome hole plug that fits in the socket

•Installs with a 3/16” hex key•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-190917 Plug for all 5-speed Big Twin transmission top covers $27.95DS-173207 Repl. O-ring (10-pk.) 1.95 (ea.)DS-174894 Repl. sealing washers (10-pk.) .95 (ea.)

DS-190917

CRANKSHAFT POSITION SENSOR COVER•Chrome billet aluminum cover fits over crankshaft position sensor

•Mounts easily; hardware included•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2018-5843 For 01-09 FXST/FLST, 04-09 FLT, 06-09 Dyna

and 06-09 XL models $29.95DS-325844 For 99-03 FLT and 99-05 Dyna models 30.95

NEUTRAL SWITCH COVER•Chrome switch cover offers a clean, custom look

•Covers the OEM switch and plug•Installs easily with included hardware•Made in the U.S.A.

PART # DESCRIPTIONSUG.

RETAIL1105-0021 For 06-09 OEM Big Twin 6-speed transmissions $39.95

NEUTRAL SWITCH COVERS•Chrome covers make the plain aluminum switch and wire connector disappear

•Available in flat-top dome and Frog Mouth™ styles

PART # DESCRIPTION SUG. RETAILDS-324807 Flat-top dome-style for 80-97 5-speed transmissions $16.95DS-324808 Frog Mouth-style for 98-05 FXD or FLT 19.95

DS-324807

DS-324808TRANSMISSION NEUTRAL SWITCHES•Replacement for most OEM applications

•Zinc plated•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-272207 For 01-06 FLT, 01-04 FXD, 01-06 FXST, FLST;

repl. OEM #33904-00 $11.95DS-272206 For 98-00 FLT, 98-00 FXD, 98-99 FXST, FLST;

repl. OEM #33902-98 11.95DS-272205 For 79-84 FX, 85 FXST, 85-86 FX, FXWG, FXB,

FXBS; repl. OEM #33901-79 12.95DS-272203 For L73-E79 FX/FL, 86 FXST, 87-97 FLT, FXR,

FXST, FLST, 86-98 XL; repl. OEM #33900-59 7.95DS-272204 For 71-E73 FX, FL; repl. OEM #71507-71 16.95DS-272202 For 65-E73 FL; repl. OEM #71507-65 15.95

DS-272206 DS-272207

DS-272202

DS-272205

DS-272204DS-272203

STOPLIGHT SWITCHES•Chrome replacement stoplight switches•Also work great for custom applications

PART # DESCRIPTION SUG. RETAILDS-272173 For 73-77 FX, FXE, FXS; repl. OEM #72005-73A $11.95DS-272174 For 75-76 XL; repl. OEM #72004-75 11.95DS-272171 For 67-74 XL; repl. OEM #72004-70 (push) 11.95DS-272170 For 35-57 FL; 37-57 45” WL; Servi Car 37-50;

repl. OEM #72004-34 (pull) 13.95

DS-272173 DS-272174 DS-272171DS-272170

HYDRAULIC STOPLIGHT SWITCHES•Feature Bakelite insulators, heavy-duty contacts and high-conductivity brass terminals

DS-272191 DS-272175

STOPLIGHT SWITCH•Replacement stoplight switch for front brake handlebar control

PART # DESCRIPTION SUG. RETAILDS-272140 For 72-81 FLH and 73-81 FX and XL; repl. OEM #72001-69B $6.95

MECHANICAL REAR STOPLIGHT SWITCH•Waterproof mechanical stoplight switch attaches to rear brake rod or brake linkage and frame tube

•Ideal for custom applications

PART # DESCRIPTION SUG. RETAILDS-272100 Stoplight switch $6.95

PART # DESCRIPTION SUG. RETAIL2106-0059 For 03-09 Touring, XL, 05-07 FXD, FXDWG, 04-09 FXST,

FLST, 07-09 V-Rod models; repl. OEM #72023-51D $23.95DS-272191 Spade-type switch for 71-07 FL, FLT, FLST, FX, FXST,

FXR, Dyna and 79-03 XL; repl. OEM #72023-51C 10.95DS-272175 Screw-type switch for 51-73 Servi-Car, 58-70 FL and

77-78 XLCR; repl. OEM #72002-51A 9.95

2106-0059

2018-5843

DS-325844

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

HANDLEBAR SWITCHES•OEM-replacement switch kits with color-coded leads and black protective sleeves•96-09 kits have 60” leads, 82-95 use 48” leads•Individual switches are also available separately•Meet or exceed OEM specifications•Fit U.S.A. and international models

DS-272196

DS-272195

FOR 72-81 MODELS

PART # DESCRIPTION SUG. RETAILSHORT STYLE, FITS STARTER AND HORN SWITCHES; REPL. OEM #71534-72DS-272141 Black $.95 (ea.)DS-272154 Chrome 1.95 (ea.)LONG STYLE, FITS TURN SIGNAL SWITCH; REPL. OEM #71535-72DS-272142 Black .95 (ea.)DS-272155 Chrome 1.95 (ea.)

HANDLEBAR SWITCH BUTTON CAPS•Made of molded plastic; sold each to consumer; sold to dealers in 10-pack

DS-272141/42 DS-272154/55

FOR MOST 72-81 FLH, FX AND XL MODELS

PART # DESCRIPTION SUG. RETAILRUN/OFF ROCKER SWITCH; REPL. OEM #71547-75DS-272137 Black $6.95DS-272151 Chrome 10.95HI/LO ROCKER SWITCH; REPL. OEM #71546-75DS-272138 Black 6.95DS-272152 Chrome 10.95UNIVERSAL ROCKER SWITCH; REPL. OEM #71483-72DS-272153 Chrome 10.95

ROCKER SWITCHES•Available in black or chrome•Sold individually

DS-272137 DS-272152 DS-272153

PART # DESCRIPTION SUG. RETAILDS-272139 Repl. switch for 72-81

FLH; L73-81 FX; and 73-81 XL; repl. OEM #71484-72A $6.95

REPLACEMENT STARTER/HORN/TURN SIGNAL SWITCH•Replaces starter, horn or turn signal switch on handlebar controls

•Sold individually

PART # DESCRIPTION SUG. RETAILDS-272136 For 41-71 FL and 71-72

FX; repl. OEM #71800-26A $8.95

STARTER/HORN SWITCH•Chromed replacement handlebar starter or horn switch

•Sold individuallyPART # DESCRIPTION SUG. RETAILDS-272118 W/ wires for 41-71 FL;

repl. OEM #70060-29 $10.95DS-272135 W/o wires for 29-69 H-D;

repl. OEM #71840-29 8.95

DIMMER SWITCHES•Chromed handlebar dimmer switches, available with or without wires

•Sold individually

DS-272118

DS-272135

0616-0053

0616-0054

635

PART # DESCRIPTIONSUG.

RETAILCHROME SWITCHES0616-0053 96-09 switch kit (includes brake light switch but not

radio control switches) $129.95DS-272196 82-95 switch kit (includes brake light switch but not

radio control switches) 112.952106-0019 96-09 start and stop switches; repl. OEM #71589-96 29.95DS-272255A 82-95 start and stop switches; repl. OEM #71589-92 25.952106-0022 96-09 dimmer and horn switches; repl. OEM #71597-96 29.95DS-272257A 82-95 dimmer and horn switches; repl. OEM #71597-92 27.952106-0020 96-09 right turn signal switch; repl. OEM #71591-96 15.95DS-272256A 82-95 right turn signal switch; repl. OEM #71591-92 16.952106-0021 96-09 left turn signal switch; repl. OEM #71598-96 15.95DS-272258A 82-95 left turn signal switch; repl. OEM #71598-92 16.95BLACK SWITCHES0616-0054 96-09 switch kit (includes brake light switch but not

radio control switches) 119.95

PART # DESCRIPTIONSUG.

RETAILBLACK SWITCHES (CONT)DS-272195 82-95 switch kit (includes brake light switch but not

radio control switches) $82.952106-0023 96-09 start and stop switches; repl. OEM #71589-96 27.95DS-272250A 82-95 start and stop switches; repl. OEM #71589-92 19.952106-0026 96-09 dimmer and horn switches; repl. OEM #71597-96 27.95DS-272252A 82-95 dimmer and horn switches; repl. OEM #71597-92 21.952106-0024 96-09 right turn signal switch; repl. OEM #71591-96 15.95DS-272251A 82-95 right turn signal switch; repl. OEM #71591-92 12.952106-0025 96-09 left turn signal switch; repl. OEM #71598-96 15.95DS-272253A 82-95 left turn signal switch; repl. OEM #71598-92 12.95FRONT BRAKE/NEUTRAL SWITCHES2106-0027 96-09 front brake switch; repl. OEM #71590-96 16.95DS-272254A 82-95 front brake switch; repl. OEM #71590-92 7.950616-0055 07-09 handlebar neutral switch; repl. OEM #71584-96A 16.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

HANDLEBAR HI/LO SWITCH•Chrome-plated billet aluminum; available with or without engraved markings

•Switch features hidden wiring that must be routed through the handlebars (drilling required)

•Made in the U.S.A.

636

PART # DESCRIPTION SUG. RETAIL0909-2116 Start button $49.95

BATTISTINI START BUTTON•Machined from stainless steel, with a flat design•Incorporates electrical switch and mounts flush onto a flat surface•3/4” diameter x 1” long

PART # DESCRIPTION SUG. RETAIL0616-0018 Dual-button for 1”-dia. handlebars $131.950616-0020 Single-button for 1”-dia. handlebars 115.950616-0038 Dual-button for 11/4”-dia. handlebars 131.950616-0063 Dual-button for 11/2”-dia. handlebars 131.95

SLIM LINE SWITCH HOUSINGS•Made from billet aluminum with a polished finish•Two-piece housing design for easy installation•Allows for internal or external handlebar wiring•Only 7/16” wide•Momentary push-button switches are rated for 1/2 amp•Switches can be used to send a low-amperage signal to activate a relay for higher-amperage-rated accessories

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 1” HANDLEBARSDS-290004 W/ engraving $99.95DS-290005 W/o engraving 99.95

PART # DESCRIPTION SUG. RETAIL1” HANDLEBARS0632-0296 Two-button, chrome $437.950632-0297 Two-button, black 437.950632-0338 Three-button, chrome 460.950632-0339 Three-button, black 460.95

MICRO SWITCHES•Machined from billet aluminum

•Conceal wiring and offer a clean, 1.5A-switch design

•Right side switch features an integrated 82-95 style throttle cable housing

•Sold in pairs (right and left side)•Made in the U.S.A. with domestic materials

PART # DESCRIPTION SUG. RETAIL3-BUTTON0616-0086 Chrome $326.950616-0087 Black anodized 326.952-BUTTON0616-0088 Chrome 295.950616-0089 Black anodized 295.95

SWITCH HOUSING ASSEMBLY•Billet switch housings available in 2- or 3-button

•Feature momentary pushbutton switches for turn signals, horn and start button

•Left and right complete set•Come in either chrome or black anodized

PART # DESCRIPTION SUG. RETAIL0616-0061 Accessory switch block $117.95

ACCESSORY SWITCH BLOCK•Long-lasting cast construction

•Two-switch function with LED indicator•For use on 1” handlebars

PART # DESCRIPTION SUG. RETAIL2106-0011 Mini push-button switch $14.95

MINI PUSH-BUTTON SWITCH•12mm round stainless steel push-button switch includes a special radius-shaped spacer to allow mounting in handlebars

•Great for turn signal, starter, horn, stop or hi-low operations (must be used with a relay)

•Includes two 20” wires; installing requires 9/32” (7.1mm) drill and 5/16” UNF tap

PART # DESCRIPTION SUG. RETAILFOR 1” HANDLEBARS0616-0045 Three-button, clutch-side, chrome $187.950616-0042 Three-button, clutch-side, black 187.950616-0046 Three-button, brake-side, chrome 187.950616-0043 Three-button, brake-side, black 187.950616-0047 One-button, clutch- or brake-side, chrome 143.950616-0044 One-button, clutch- or brake-side, black 143.95

SWITCH HOUSINGS•Machined from solid billet aluminum

•Available in one- or three-switch functionality•Three-switch housing features three weatherproof switches •Available in either a brake- or caliper-side version•Single-switch housing features one weatherproof switch and can be mounted to either brake- or caliper-side

•Available in show-chrome or black anodized finish, providing a classy complement to the Pro-One billet hand controls

•Can be wired internally or externally•Complete instructions included

PART # DESCRIPTION SUG. RETAIL2120-0085 Push-button converter $40.95

PUSH-BUTTON CONVERTER•Convenient way to wire up push-button hand control switches

•Takes momentary signal from a push-button hand control switch and converts it to a standard “latching” signal

•Design is fully circuit-protected and has no relays to wear out

•Compact size, measures just 2” x 0.6” x 0.5”•Simple six-wire hookup, wiring diagram included•Designed for use with 12V electrical systems•Compatible with most push-button switch hand controls and Thunder Heart’s Micro Harness Controller

PART # DESCRIPTION SUG. RETAILDS-272147 Lighted rocker switch $4.95

ROCKER SWITCH•Lighted switch fits many popular switch consoles

PART # DESCRIPTION SUG. RETAILDS-272177 Toggle switch $17.95

TOGGLE SWITCH•Waterproof two-position switch•Use with any custom application•Made in the U.S.A.

0616-0018 0616-0020 0616-0063

DS-290004

0632-0297

0632-0338

0616-0086

0616-0089

0616-0042

0616-0044

0616-0046

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

PART # DESCRIPTIONSUG.

RETAIL2130-0021 Electrical box $99.95

ELECTRICAL BOX•Made from billet aluminum, then given a chrome-plated, polished finish for a show-quality look

•Relocates the ignition switch to a side mount and can be used to mount other electrical components

•Works great for custom applications•Measures 71/4” L x 2” W x 2” D

PART # DESCRIPTIONSUG.

RETAILCHROME STEELDS-305199 For use w/ stock

handlebar controls $418.95DS-305198 For use w/ custom Ness or

JayBrake handlebar controls 418.95DS-305197 For use w/o handlebar controls 418.95

PART # DESCRIPTIONSUG.

RETAILCHROME BILLET ALUMINUMDS-305223 For use w/ stock

handlebar controls $583.95DS-305224 For use w/ custom Ness or

JayBrake handlebar controls 583.95DS-305225 For use w/o handlebar controls 583.95

SIDE-MOUNT ELECTRICAL BOX AND WIRING HARNESS•Locates ignition and some handlebar switches to a custom side-mount position

•Improves the look of any custom bike•Three kits to choose from with easy-to-follow instructions

•Available with chrome steel or billet aluminum boxes

PART # DESCRIPTIONSUG.

RETAIL2120-0256 All 96-06 H-D models (except Dressers) $195.952120-0257 All 07-09 H-D models (except Dressers) 195.952120-0258 96-06 FLHT, FLHR, FLHX, FLTR models 195.952120-0259 07-08 FLHT, FLHR, FLHX, FLTR models 195.95

HAND CONTROL SWITCH HARNESS CONVERTER•Provides two latching relay functions for Hawg Halters momentary push button switches; PART #s 0616-0086 through 0616-0089

•A direct plug in to the stock HD harness

PART # DESCRIPTIONSUG.

RETAILDS-305200 For 75-81 FXE, XLH and

XLCH models (12”) $15.95DS-305201 For 82-95 H-D (48”) 17.95

EXTENDED HANDLEBAR WIRING HARNESSES•Replace stock harness when converting to taller handlebars

•DS-305200 has a 12” extension and comes complete with all hardware and instructions

•DS-305201 has 48” long wires and 38” long black covering which allows the installation of almost any height bars; it comes with connectors and tie wraps

PART # DESCRIPTIONSUG.

RETAIL2120-0251 8” extension $38.952120-0252 12” extension 40.952120-0253 15” extension 43.95

ELECTRONIC THROTTLE CONTROL EXTENSIONS•Allow easy changes in handlebar height on machines with the fly-by-wire system

•Made with OEM-type connectors•Extensions can be snapped together to create longer lengths

•Sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 73-81 BIG TWIN AND XL MODELSDS-305202 Handlebar wiring harness, complete $39.95

HANDLEBAR WIRING HARNESS WITH SWITCHES AND HARDWARE•Available in a complete 48” kit for left and right sides

•Completely soldered together, ready to install; color-coded to match OEM specifications

•Includes switches, wire connectors, buttons, screws, stoplight switch rubber boot and switch retaining plates

DS-305225

2120-02562120-0251

2120-0252

2120-0253

PART # DESCRIPTIONSUG.

RETAIL2120-0244 +4” $37.952120-0245 +8” 39.95

PART # DESCRIPTIONSUG.

RETAIL2120-0246 +12” $41.952120-0247 +15” 44.95

THROTTLE BY WIRE EXTENSION HARNESS KIT•Designed and tested to extend your wiring without causing any harm or interference to the motorcycle’s computer when installing taller handlebars

•Color coded to connect to the existing 6-Position Molex connector; simply plug and play

PART # DESCRIPTIONSUG.

RETAILFOR 07-09 ALL (EXCEPT FLHT MODELS) (14 WIRE)2120-0229 +4” $31.952120-0230 +8” 32.952120-0231 +12” 33.952120-0232 +15” 39.95FOR 96-06 ALL (EXCEPT FLHT, FLT MODELS) (12 WIRE)2120-0233 +4” 31.952120-0234 +8” 32.952120-0235 +12” 33.952120-0236 +15” 39.95FOR 07-08 FLHT, FLHX, FLHR, FLTR MODELS (26 WIRE)2120-02211 +4” 48.95

PART # DESCRIPTIONSUG.

RETAILFOR 07-08 FLHT, FLHX, FLHR, FLTR MODELS (26 WIRE) (CONT)2120-02221 +8” $51.952120-02231 +12” 53.952120-02241 +15” 55.95FOR 96-06 FLHT, FLT MODELS (24 WIRE)2120-0225 +4” 44.952120-0226 +8” 46.952120-0227 +12” 48.952120-0228 +15” 50.951 08 applications will require TBW

extension kits PART #s 2120-0244 through 2120-0247.

READY-TO-INSTALL HANDLEBAR EXTENSION HARNESSES•All the items needed to successfully extend the wiring to a set of OEM H-D handlebar switches

•Harnesses include both male and female Molex terminals crimped on each end

•Kits for all except FLHT and FLT models include wire heat shrink, a length of 3/8” heat shrink and color-matching wire

•Kits for FLHT and FLT models include wire heat shrink, a length of 1/2” heat shrink and color-matching wire

•Made in the U.S.A.2120-0221

637

FOR 08 FLHT, FLHX, FLHR, FLTR MODELS

2120-0244

DS-305200

DS-305198

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

638

EXTENDED HANDLEBAR WIRING HARNESS•Extended harness simplifies handlebar swaps that require longer wiring

•Color coded to match OEM wiring; measures 36” in length•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2120-0022 For 96-06 Big Twin and XL models $25.95

HANDLEBAR WIRE HARNESS EXTENSION KITS•No cutting, soldering or hassle•Available in various lengths for bikes with or without cruise control, with radio or with CB radio and with electronic throttle

•Kits include color-coded wire, OEM pin connectors, 1/8” and 3/8” shrink tubing, complete instructions, illustration and wire block diagram

•Can be internally wired through handlebars

NOTE: Standard kits listed with and without cruise control contain extensions for both sides of handlebars; additional kits must be ordered for H-D radio, H-D CB and electronic throttle and purchased separately in addition to the standard kits. 2120-0032

PART # DESCRIPTION SUG. RETAILBRAIDED STAINLESS STEEL HARNESSES2120-0004 Turn signal, 24” (pr.) $57.952120-0005 Turn signal, 36” (pr.) 68.952120-0006 Headlight, 18” (ea.) 36.952120-0007 Tachometer, 48” (ea.) 40.952120-0010 Rear brake light switch, 18” (ea.) 40.95

PART # DESCRIPTION SUG. RETAILDO-IT-YOURSELF KITS2120-0002 External handlebar, 36” (pr.) $53.952120-0003 Internal handlebar, 18” (pr.) 40.952120-00081 Oil sending unit switch, 18” (ea.) 26.952120-0009 Regulator, 48” (ea.) 40.952120-0011 Ignition, 48” (ea.) 40.951 For 80” Evolution motors only.

BRAIDED WIRE HARNESSES AND DO-IT-YOURSELF KITS•Stainless steel offers a unique custom look compared to plain black harnesses•Stainless steel harnesses feature wiring for custom applications•Do-it-yourself kits are used to cover existing wires•Both have a clear PVC outer covering to protect your bike and preserve the finish of the braided cover•25’ rolls of stainless steel or copper covers without clear PVC covering are also available for various OEM custom applications; see CABLES section

•25’ rolls of clear shrink tubing in five sizes sold separately; see CABLES section•Made in the U.S.A.

2120-0002

2120-0003

2120-0006

2120-00102120-0005

2120-0004 2120-0007

2120-0011

2120-0009

2120-0008

PART # DESCRIPTIONSUG.

RETAILFOR 07-09 WITH HD RADIO (8 WIRE)2120-0125 4” extension kit $35.952120-0126 8” extension kit 40.952120-0127 12” extension kit 44.952120-0128 15” extension kit 46.952120-0168 18” extension kit 56.952120-0169 20” extension kit 62.952120-0170 24” extension kit 75.95FOR 96-06 WITH HD RADIO (8 WIRE)2120-0087 4” extension kit 34.952120-0088 8” extension kit 38.952120-0089 12” extension kit 43.952120-0090 15” extension kit 45.95

PART # DESCRIPTIONSUG.

RETAILFOR 96-06 WITH HD RADIO (8 WIRE) (CONT)2120-0162 18” extension kit $56.952120-0163 20” extension kit 62.952120-0164 24” extension kit 75.95FOR 07-09 WITH HD CB RADIO (12 WIRE)2120-0129 4” extension kit 46.952120-0130 8” extension kit 48.952120-0131 12” extension kit 55.952120-0132 15” extension kit 57.952120-0171 18” extension kit 70.952120-0172 20” extension kit 78.95

PART # DESCRIPTIONSUG.

RETAILFOR 07-09 WITH HD CB RADIO (12 WIRE) (CONT)2120-0173 24” extension kit $93.95FOR 96-06 WITH HD CB RADIO (12 WIRE)2120-0091 4” extension kit 45.952120-0092 8” extension kit 49.952120-0093 12” extension kit 54.952120-0094 15” extension kit 56.952120-0165 18” extension kit 70.952120-0166 20” extension kit 78.952120-0167 24” extension kit 93.95

PART # DESCRIPTIONSUG.

RETAILFOR 08-09 HD WITH ELECTRIC THROTTLE2120-0174 4” extension kit $33.952120-0175 8” extension kit 35.952120-0176 12” extension kit 38.952120-0177 15” extension kit 40.952120-0178 18” extension kit 44.952120-0179 20” extension kit 51.952120-0180 24” extension kit 55.95

PART # DESCRIPTIONSUG.

RETAILFOR 07-09 HD WITHOUT CRUISE CONTROL (14 WIRE)2120-0260 4” extension kit $48.952120-0261 8” extension kit 52.952120-0262 12” extension kit 57.952120-0263 15” extension kit 61.952120-0264 18” extension kit 71.952120-0265 20” extension kit 75.952120-0266 24” extension kit 81.95

PART # DESCRIPTIONSUG.

RETAILFOR 96-06 HD WITHOUT CRUISE CONTROL (12 WIRE)2120-0027 4” extension kit $37.952120-0028 8” extension kit 42.952120-0029 12” extension kit 46.952120-0030 15” extension kit 48.952120-0150 18” extension kit 60.952120-0151 20” extension kit 64.952120-0152 24” extension kit 71.95

PART # DESCRIPTIONSUG.

RETAILFOR 07-09 HD WITH CRUISE CONTROL (17 WIRE)2120-0267 4” extension kit $65.952120-0268 8” extension kit 67.952120-0269 12” extension kit 71.952120-0270 15” extension kit 75.952120-0271 18” extension kit 79.952120-0272 20” extension kit 83.952120-0273 24” extension kit 89.95

PART # DESCRIPTIONSUG.

RETAILFOR 96-06 HD WITH CRUISE CONTROL (15 WIRE)2120-0031 4” extension kit $49.952120-0032 8” extension kit 54.952120-0033 12” extension kit 57.952120-0034 15” extension kit 59.952120-0153 18” extension kit 75.952120-0154 20” extension kit 82.952120-0155 24” extension kit 90.95

STANDARD KITS

ADDITIONAL KITS

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

639

HOT BOX WIRING HARNESSESREAR LIGHTING HARNESS•Consists of a replacement rear lighting harness with Namz “Plug-n-Play” technology

•Features two separate detachable pigtail harnesses for each saddlebag with a ground or single output wire with RUN, BRAKE and TURN SIGNAL functions

•Perfect for adding custom lighting to saddlebags•Works just like the factory model except it has two extra wires, (right and left turn signal output) to allow for a more custom lighting design

•Best suited for custom rear fenders or more extreme or custom built Baggers

REAR LIGHTING SUBHARNESS•Less aggressive but still features Namz “Plug-n-Play” technology•Designed for the rider that wants to keep it simple; just disconnect the rear lighting harness and plug out unit in between

•Subharness does not replace the rear lighting harness•Best suited for near stock Baggers•Features two separate detachable pigtail harnesses for each saddlebag with a ground and single output wire with RUN, BRAKE and TURN SIGNAL functions

PART # DESCRIPTION SUG. RETAIL2120-0254 Rear lighting harness $208.95

PART # DESCRIPTION SUG. RETAIL2120-0255 Rear lighting subharness $208.95

2120-0254

ELECTRONIC HARNESS CONTROLLER•Compact design makes it easy to hide on a custom motorcycle•Performs all fuse, relay and signal canceling functions in one simple package•Allows a dual-filament bulb to be used in three ways: tail, brake and turn signal (excluding the need for a center brake light)

•Weather-resistant connections for trouble-free use in extreme environments•Trim-to-fit harness allows installation on most custom bikes

PART # DESCRIPTION SUG. RETAIL2120-0024 “D” model electronic controller $310.95

MICRO HARNESS CONTROLLER•Billet 6061 T-6 aluminum housing and 7’ trim-to-fit wiring design is compact and easily hidden on custom motorcycles

•Performs all fuse, relay and signal-canceling functions in one simple package

•Provides multiple flasher combinations (signal canceling, hazard lights and tri-state indicators, running lights, brake lights and turn signal) from one bulb

•Utilizes relays to distribute all power functions, thus eliminating the need to run large wires to all the switches

•Weather-resistant connections for trouble-free use in extreme environments

•Weighs 2.3 lb.

PART # DESCRIPTION SUG. RETAIL2120-0023 For choppers and saddle tank bikes w/o

separate brake light $310.95

PART # DESCRIPTION SUG. RETAIL2120-0086 For choppers and saddle tank bikes w/

separate brake light $345.95

PART # DESCRIPTION SUG. RETAIL2120-0018 Custom wire harness $179.95

CUSTOM CHOPPER WIRE HARNESS•Makes wiring your custom motorcycle a snap

•Includes just the essentials: keyed on- off start switch, 3-way toggle switch, in-line fuses (15 and 30 amp), wire ends, shrink tube and wiring diagram

•For custom applications only

PART # DESCRIPTION SUG. RETAIL2120-0084 Center brake light module $40.95

CENTER BRAKE LIGHT MODULE•Allows installation of a center brake light on custom bikes when used with Thunder Heart’s Micro Harness Controller PART # 2120-0023

•Compatible with LED and incandescent bulbs

•Solid-state construction, fully circuit-protected and has no relays to wear out

•Compact size of 2” x 0.6” x 0.5” lets you mount it just about anywhere

•12V, 3A max current capacity•Simple four-wire hookup; wiring diagram included

PART # DESCRIPTION SUG. RETAILDS-272333 3/8” i.d.; repl. OEM #56073-83, 4-pk. $4.95DS-272334 1/2” i.d.; repl. OEM #70345-84, 4-pk. 4.95DS-272350 3/8” i.d.; repl. OEM #56073-83, 10-pk. 1.55 (ea.)DS-272351 1/2” i.d.; repl. OEM #70345-84, 10-pk. 1.55 (ea.)

HANDLEBAR WIRING CLIPS•Chrome-plated nylon clips•Very durable and resist cracking•Meet or exceed OEM specifications•Sold in 4-packs or 10-packs

DS-272334

2120-00232120-0086

2120-0255

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

640

PART # DESCRIPTION SUG. RETAIL2120-0194 Mate-N-Lock builders kit $338.95REPLACEMENT CAP CONNECTORS2120-0195 2-position plug (5-pk.) 1.95 (ea.)2120-0196 3-position plug (5-pk.) 2.95 (ea.)2120-0197 4-position plug (5-pk.) 2.95 (ea.)2120-0198 6-position plug (5-pk.) 2.95 (ea.)2120-0199 9-position plug (5-pk.) 3.95 (ea.)2120-0200 12-position plug (5-pk.) 4.95 (ea.)

PART # DESCRIPTION SUG. RETAILREPLACEMENT PLUG CONNECTORS (CONT)2120-0201 2-position plug (5-pk.) $1.95 (ea.)2120-0202 3-position plug (5-pk.) 2.95 (ea.)2120-0203 4-position plug (5-pk.) 3.95 (ea.)2120-0204 6-position plug (5-pk.) 3.95 (ea.)2120-0205 9-position plug (5-pk.) 5.95 (ea.)2120-0206 12-position plug (5-pk.) 7.95 (ea.)

PART # DESCRIPTION SUG. RETAILCRIMP TERMINALS2120-0207 Stamped “U-barrel” pins

(plugs) (100-pk.) $14.952120-0208 Stamped “U-barrel”

sockets (caps) (100-pk.) 14.95

MATE-N-LOCK BUILDERS KIT•Mate-N-Lock connectors feature a water-tight male/female design

•Come packaged with the necessary wire and interface seal

•Includes six 12-position plugs, eight 9-position plugs, eight 6-position plugs, four 4-position plugs, four 3-position plugs, six 2-position plugs and 100 terminals for plugs and caps

•Crimp terminals are sold separately•Connectors also available in packs of five•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2120-0181 Multi-Lock builders kit $213.95REPLACEMENT CAP CONNECTORS2120-0182 2-position plug (5-pk.) 1.95 (ea.)2120-0183 3-position plug (5-pk.) 1.95 (ea.)2120-0184 4-position plug (5-pk.) 1.95 (ea.)2120-0185 6-position plug (5-pk.) 1.95 (ea.)2120-0186 8-position plug (5-pk.) 2.95 (ea.)

PART # DESCRIPTION SUG. RETAILREPLACEMENT PLUG CONNECTORS (CONT)2120-0187 2-position plug (5-pk.) $1.95 (ea.)2120-0188 3-position plug (5-pk.) 1.95 (ea.)2120-0189 4-position plug (5-pk.) 1.95 (ea.)2120-0190 6-position plug (5-pk.) 1.95 (ea.)2120-0191 8-position plug (5-pk.) 2.95 (ea.)

PART # DESCRIPTION SUG. RETAILCRIMP TERMINALS2120-0192 Stamped “U-barrel” pins

(plugs) (100-pk.) $14.952120-0193 Stamped “U-barrel”

sockets (caps) (100-pk.) 22.95

MULTI-LOCK BUILDERS KIT•AMP Multi-Lock connectors are the direct Harley-Davidson replacements that have been used since 1996

•These non-waterproof connectors are used on every factory model

•Includes all necessary wire seals, wedgelocks and crimp terminals

•Includes eight 8-position plugs, eight 6-position plugs, eight 4-position plugs, eight 3-position plugs, eight 2-position plugs and 100 terminals for plugs and caps

•Connectors also available in packs of five•Crimp terminals are sold separately•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2120-0209 Delphi/AMP builders kit $300.953807-0029 Delphi weather-pack terminal removal tool 29.95REPLACEMENT AMP CONNECTORS2120-0210 For 05-06 models, connects active intake

sensor, front O2 (oxygen) sensor and rear O2 sensor; repl. OEM #72007-05 (5-pk.) 3.95 (ea.)

2120-0211 For 07-09 models, connects the active intake sensor; repl. OEM #72012-07 (5-pk.) 8.95 (ea.)

REPLACEMENT DELPHI CONNECTORS2120-0212 For 06-09 models, connects ignition coil, idle

speed sensor and fuel pump; repl. OEM #72066-06 (5-pk.) 5.95 (ea.)

2120-0213 For 06-09 models, connects intake air temp sensor; repl. OEM #72062-06 (5-pk.) 6.95 (ea.)

PART # DESCRIPTION SUG. RETAILREPLACEMENT DELPHI CONNECTORS (CONT)2120-0214 For 06-09 models, connects front fuel injector

and rear fuel injector; repl. OEM #72098-06 (5-pk.) $4.95 (ea.)

2120-0215 For 06-09 models, connects speedometer sensor and siren; repl. OEM #72064-06 (5-pk.) 5.95 (ea.)

2120-0216 For 06-09 models, connects throttle position sensor (TPS); repl. OEM #72065-06 (5-pk.) 7.95 (ea.)

2120-0217 For 98-09 models, connects map sensor; repl. OEM #72230-98 (5-pk.) 8.95 (ea.)

2120-0218 For 95-05 models, connects front fuel injector and rear fuel injector; repl. OEM #72244-95 (5-pk.) 6.95 (ea.)

DELPHI/AMP CONNECTOR BUILDERS KIT•Kit includes four each of the AMP and Delphi connectors•Connectors also available in packs of five•Made in the U.S.A.

2120-0194

2120-0195

2120-0181

2120-01822120-0187

2120-0209

3807-0029

2120-0210 2120-0211

2120-0213

2120-0214 2120-0215

2120-02162120-0217 2120-0218

2120-0212

2120-0201

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

PART # DESCRIPTION SUG. RETAILCONNECTORS2120-0037 Pins, open-style (100-pk.) $.55 (ea.)2120-0038 Sockets, open-style (100-pk.) .55 (ea.)2120-0071 Pins, closed-style (100-pk.) .95 (ea.)

PART # DESCRIPTION SUG. RETAILCONNECTORS (CONT)2120-0072 Sockets, closed-style (100-pk.) $.95 (ea.)3807-0017 Crimp tool for PART #2120-0071, 2120-0072 416.95 (ea.)3807-0025 Crimp tool for PART #2120-0037, 2120-0038 361.95 (ea.)

PART # DESCRIPTIONSUG.

RETAILRECEPTACLES, EACH2120-0039 Gray 2-pin $2.952120-0040 Black 2-pin 2.952120-0041 Gray 3-pin 3.952120-0042 Black 3-pin 3.952120-0043 Gray 4-pin 4.952120-0044 Black 4-pin 4.95

PART # DESCRIPTIONSUG.

RETAILRECEPTACLES, EACH (CONT)2120-0045 Gray 6-pin $6.952120-0046 Black 6-pin 6.952120-0047 Gray 8-pin 10.952120-0048 Black 8-pin 10.952120-0049 Gray 12-pin 13.952120-0050 Black 12-pin 13.95

PART # DESCRIPTIONSUG.

RETAILPLUGS, EACH2120-0051 Gray 2-socket $3.952120-0052 Black 2-socket 3.952120-0053 Gray 3-socket 5.952120-0054 Black 3-socket 5.952120-0055 Gray 4-socket 5.952120-0056 Black 4-socket 5.95

PART # DESCRIPTIONSUG.

RETAILPLUGS, EACH (CONT)2120-0057 Gray 6-socket $7.952120-0058 Black 6-socket 7.952120-0059 Gray 8-socket 10.952120-0060 Black 8-socket 10.952120-0061 Gray 12-socket 15.952120-0062 Black 12-socket 15.95

DEUTSCH SEALED CONNECTOR COMPONENTS•Refill your Deutsch Builder Kits with these connector components•Each connector features a silicon rubber seal to reduce corrosion and moisture•The same connectors, receptacles and plugs used on factory wiring harnesses•Available with black or gray housings•Pins and sockets feature closed or open crimp-style ends•Can also be used for replacement in OEM connectors•Closed-style pins and sockets require Deutsch crimper tool, PART #3807-0017; sold separately•Receptacles and plugs come complete with required locks; sold each•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILBUILDER KITS2120-0075 Black $491.95

PART # DESCRIPTION SUG. RETAILBUILDER KITS (CONT)2120-0076 Gray $491.95

DEUTSCH BUILDER KITS•Builder kits neatly organize Deutsch pins and plugs in one complete package

•Kits include a storage bin, 100 open-style pins, 100 open-style stamp sockets and four each (unless noted) of the following receptacles and plug styles: 2-pin; 3-pin; 4-pin; 6-pin (6 in each kit); 8-pin; 12-pin

•Available with black or gray plugs and receptacles•Replacement components are available when bins need refilling•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2120-0035 Male pins $3.95 (10-pk.)2120-0036 Female sockets 5.95 (10-pk.)

CONNECTOR PINS/SOCKETS•Deutsch open-style connector pins and sockets for late-model wire harnesses

•For repairs or custom-built wire harness using Harley connector blocks

•Choice of male pins (OEM #72190-94) or female sockets (OEM #72191-94)

•Sold in packs of 10

2120-0075 2120-0076

2120-0035

2120-0036

2120-0037 2120-0038

2120-0039

2120-0051

2120-00712120-0072

3807-0017

3807-0025

2120-0040

2120-0052

2120-0041

2120-0053

2120-0042

2120-0054

2120-0043

2120-0055

2120-0056

2120-0044

2120-0057

2120-0045

2120-0058

2120-0046

2120-0059

2120-0047

2120-00602120-0048

2120-00612120-00492120-00622120-0050

641

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

BLACK SHRINK TUBING•Available in 1/8”, 3/8” & 1/2” diameters in 5 and 10 foot lengths

UNIVERSAL COVERS•25’ rolls of noncoated stainless steel or copper covers

•For various OEM or custom applications

•Made in the U.S.A.

642

PART # DESCRIPTIONSUG.

RETAILDS-305170 Black $7.95DS-305172 Brown 7.95DS-305174 Blue 7.95DS-305176 Green 7.95DS-305178 Purple 7.95

PART # DESCRIPTIONSUG.

RETAILDS-305180 Pink $7.95DS-305182 Red 7.95DS-305184 White 7.95DS-305186 Yellow 7.95DS-305188 Orange 7.95

16-GAUGE PRIMARY WIRE•35’ rolls available in 10 colors•Wire is stranded copper and has thermoplastic housing

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2120-0012 1/2” i.d. stainless steel cover (25’ roll) $83.952120-0069 1/2” i.d. copper cover (25’ roll) 67.952120-0073 3/4” i.d. stainless steel cover (25’ roll) 89.952120-0219 3/4” i.d. copper cover (25’ roll) 84.95

PART # DESCRIPTION SUG. RETAIL5’ LENGTHDS-305190 .1875” Shrink to .052” $2.95DS-305191 .250” Shrink to .125” 2.95DS-305193 .375” Shrink to .188” 3.95DS-305195 .500” Shrink to .250” 5.95DS-305220 .750” Shrink to .375” 7.9525’ LENGTHDS-305192 .250” Shrink to .125” 21.95DS-305194 .375” Shrink to .188” 25.95DS-305196 .500” Shrink to .250” 38.95DS-305221 .750” Shrink to .375” 39.95

BLACK SHRINK TUBING•Available in five sizes and two lengths•Made in the U.S.A.

PART # DESCRIPTIONSUG.

RETAIL5-FT. LENGTHS2120-0097 1/2” diameter $6.952120-0098 3/4” diameter 7.952120-0099 1” diameter 10.95

PART # DESCRIPTIONSUG.

RETAIL10-FT. LENGTHS2120-0095 1/8” diameter $5.952120-0100 1/4” diameter 7.952120-0096 3/8” diameter 9.95

CLEAR SHRINK TUBING•Used to cover cables, wiring, etc.•Prevents scratching of paint and chrome•Available in 10’ rolls in three sizes

PLASTIC HOSE, WIRING OR CABLE COVERING•Plastic covering comes in three colors

•Fits 1/4” or 3/8” oil or fuel line, cables or wires

•Sold in 38” lengths

PART # DESCRIPTION SUG. RETAILDS-390414 Chrome 1/4” covering $15.95DS-390415 Chrome 3/8” covering 16.95DS-390416 Chrome blue 1/4” covering 15.95DS-390417 Chrome blue 3/8” covering 16.95DS-390418 Chrome red 1/4” covering 15.95DS-390419 Chrome red 3/8” covering 16.95

PART # DESCRIPTION SUG. RETAILDS-223001 5/16” diameter $7.95DS-223000 3/16” diameter 6.95

CHROME CABLE/WIRE COVERING•A flexible chrome coiled plastic covering for control cables and electrical wires

•Available in 5’ lengths in two diameters

HIGH-TEMPERATURE SLEEVING KITS•Protects against abrasion, resists oil, gasoline and most chemicals

•Heat range of -40° to 200+°F•UV light resistant•Easy to cut with scissors and is easy to clean with soap and water

•Kits include 10 ft. of 1/4” sleeving, 10 ft. of 3/8” sleeving and 5 ft. of 1/2” sleeving and heat-shrink termination tubing

•Available in black, red or blue

PART # DESCRIPTIONSUG.

RETAIL2120-0013 1/4” i.d. $83.952120-0014 5/16” i.d. 83.952120-0015 3/8” i.d. 83.95

PART # DESCRIPTIONSUG.

RETAIL2120-0016 1/2” i.d. $83.952120-0070 3/4” i.d. 83.95

CLEAR SHRINK TUBING•Used to cover cables and wiring

•Protects paint and chrome

•Available in four sizes•Sold in 25’ rolls•Made in the U.S.A.

2120-0070

2120-0069 2120-0073

2120-0012

CABLE, HOSE AND WIRE CHROME DRESS-UP KIT•A dynamic chrome covering that contours surfaces for a smooth, custom look

•Cover your wire harnesses, handlebar wiring, brake lines, throttle lines and fuel hose•Will easily expand to fit over ends with a snug fit•Easy to install and provides long-lasting protection•Includes 6ft. of 1/2”, 20ft. of 3/8”, 8ft. of 1/4” diameter expandable chrome covering, six chrome zip ties and black and clear shrink tubing

PART # DESCRIPTION SUG. RETAIL0659-0009 Cover kit $39.95

PART # DESCRIPTION SUG. RETAILDS-223460 3/8” dia. $10.95DS-223461 1/2” dia. 10.95DS-223462 3/4” dia. 12.95

2120-0081

2120-0080

2120-0013

Before

After

2120-0082

PART # DESCRIPTIONSUG.

RETAIL2120-0080 Black $27.952120-0081 Red 27.952120-0082 Blue $27.95

All part numbers in BOLD MAGENTA are new for 2009.

SECTION 10

WINDSHIELDS

TOURING

LUGGAGE

SEATS &SISSY BARS

EXHAUST

FUEL/AIRSYSTEMS

ENGINE

TRANSMISSION& DRIVELINE

GASKETS& SEALS

ELECTRICAL

LIGHTING

HANDLEBARS,CONTROLS& MIRRORS

CABLES

BRAKES

TANKS &OIL FILTERS

DASHES& GAUGES

FRAMES,SUSPENSION& FENDERS

FOOTRESTS& LICENSE

PLATE FRAMES

TIRES,TUBES &WHEELS

HARDWARE,CHEMICALS

& TOOLS

COVERS,SECURITY

& GENERAL

643

PART # DESCRIPTIONSUG.

RETAIL0502-0197 For 82-94/

99-00 FXR $102.95

FXR ELECTRICAL PANELS•Replaces FXR stock electrical and ignition panels

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILDS-189939 70-77 Big Twin models $20.95

TERMINAL PLATE•Comes preassembled and painted black

•Includes all mounting hardware

•Replaces OEM #72300-70

TERMINAL BOX ASSEMBLY•Comes preassembled and painted black

•Includes all mounting hardware

•Repl. OEM #s 72325-48, 72335-48, 72341-56A and 72345-48

PART # DESCRIPTION SUG. RETAILDS-272165 8-lug block $15.95DS-272166 6-lug block 11.95DS-272167 4-lug block 8.95

DS-272165

DS-272166

DS-272167

JUNCTION BLOCKS•Bakelite blocks for custom wiring jobs – compact and easy to hide

•Available in 4-, 6- and 8-lug sizes•Come with lug screws; mounting hardware not included

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILSTUD/DUAL-SPADE STYLEDS-324001 30A $5.95DS-324002 40A 5.95TWO-STUD STYLEDS-325646 50A; repl. OEM #74600-94 10.950913-1001 40A; repl. OEM #74600-97A 5.95DS-325647 30A; repl. OEM #74599-77B 6.95DS-325648 15A; repl. OEM #74589-73 7.95DUAL-SPADE STYLEDS-325649 15A; repl. OEM #74587-94 9.95

FOR MOST 70-99 BIG TWIN AND XL MODELS

CIRCUIT BREAKERS•Available in 15, 30, 40 or 50A•Sold individually•Made in the U.S.A.

TETHER KILL SWITCH•Tether kill switch designed to stop a runaway motorcycle if the rider is separated from it

•Available either in panel mount or handlebar mount•Complete with a clipped tether cord that extends to 50”•Panel mount fits in a 5/8” hole in a flat panel•Handlebar mount clamps around handlebar, comes in 7/8”, 1” or 11/4”•Billet aluminum body, water-resistant switch, stainless internal components with high-temperature Teflon® 24” silver-coated copper wire for dependable operation

•For normally closed battery-type ignition•Optional wristband tether is easy to attach, fits over bulky gloves and offers hook-and-loop adjustment

•Made in the U.S.A.; patented

PART # DESCRIPTIONSUG.

RETAILTETHER KILL SWITCHESDS-305501 Panel mount $71.95DS-305502 For 7/8” handlebars 109.95DS-305503 For 1” handlebars 109.952106-0043 For 11/4” handlebars 97.95

PART # DESCRIPTIONSUG.

RETAILTETHER CORDS2106-0030 Optional tether cord

w/ wristband $18.95DS-305504 Repl. tether cord

w/ clip 14.95

DS-305501

2106-0030

2106-0043

DS-305504DS-305502

PART # DESCRIPTION SUG. RETAIL86-44410 Handlebar mount

cigarette lighter $17.95

HANDLEBAR-MOUNT CIGARETTE LIGHTER•Mounts to 7/8” and 1” bars•Includes fuse holder, hot and ground leads

CIGARETTE LIGHTER/MAP LIGHT•Dual-purpose unit has clip for hanging on bars

•Button-activated element for lighting cigarettes

•Button-activated map light•1’ coiled cord plugs into cigarette lighter receptacle

PART # DESCRIPTION SUG. RETAIL86-44420 Cigarette lighter/

map light $11.95

PART # DESCRIPTION SUG. RETAILDS-272321 Lighter kit $14.95

UNIVERSAL MOISTURE-RESISTANT CIGARETTE LIGHTER•Features a rubber seal/cap to keep moisture out•Kit includes a lighter, fuse holder, 10-amp fuse and wire

PART # DESCRIPTION SUG. RETAIL2130-0001 97-08 FLT, FLHT Tour-Paks $24.95

“PAKPOWER” TOUR-PAK POWER PLUG•Powers accessories while you ride•Allows recharging while inside the Tour-Pak•Plugs into Tour-Pak’s existing wiring•Includes detailed instructions

0913-1001

DS-325649

PART # DESCRIPTION SUG. RETAIL2130-0027 Power Pod $119.95

POWER POD™ 2•Features a traditional 12V cigarette lighter-style power outlet on the top to power an iPod™, cell phone, or virtually any device that can be charged through a cigarette lighter

•New 2-prong SAE outlet on the bottom doubles its effectiveness by providing riders the ability to connect heated clothing, or as a convenient outlet to connect the bike to a trickle charger, all without the need for additional wiring to the battery

•Crafted of solid steel with a show chrome finish•Shockproof mechanism and weatherproof case•Universal mounting bracket for mounting on any bolt on the bike (up to 3/8”)

•Installation is easy: mount it, attach the wire (with an included in-line fuse) to your battery, and it’s ready for the road

DS-324001

DS-324002

DS-325648

DS-325647

DS-325646

PART # DESCRIPTION SUG. RETAILDS-189917 48-69 Big Twin models $46.95