proj-ngp-s and t/south east central rly tender document - IREPS

DYCSTEProjectngp acting for and on behalf of The President of India invites E-Tenders against Tender No 127-ST-P-NGP-AutoSig-EI-M Closing Date/Time 22/08/2022 15:00 Hrs. Bidders will be able to submit their original/revised bids upto closing date and time only.Manual offers are not allowed against this tender, and any such manual offer received shall be ignored.

1. NIT HEADER

Name of Work

"Complete design & drawing; Supply of critical materials, Excavation of trenches, Laying ofSignalling, Quad Cable, OFC and Power cables, casting of foundation & erection ofapparatus cases, junction boxes, signals, Installation of relays, track circuits, axle counters,LC gate, EKT/KLCR, IPS ,UFSBI, RTU, Datalogger/RTU, Installation and Testing of MSDACincluding necessary modification of RRI & Distributed Electronic Interlocking(Hitachi Make)for Provision of Automatic signalling work in KAV-NGP and KAV-ITR-NGP section in NagpurDivision of South East Central Railway ".

Bidding type Normal Tender

Tender Type Open Bidding System Single Packet System

Tender Closing Date Time 22/08/2022 15:00 Date Time Of Uploading Tender 30/07/2022 17:26

Pre-Bid ConferenceRequired No Pre-Bid Conference Date Time Not Applicable

Advertised Value 62678715.14 Tendering Section TENDER

Bidding Style Single Rate for Each ScheduleItem

Bidding Unit

Earnest Money (Rs.) 463400.00 Validity of Offer ( Days) 45

Tender Doc. Cost (Rs.) 0.00 Period of Completion 6 Months

Contract Type Works Contract Category Expenditure

Bidding Start Date 08/08/2022Are Joint Venture (JV) firmsallowed to bid No

Ranking Order For Bids Lowest to Highest Expenditure Type Combined (Revenue +Capital Works)

2. SCHEDULE

S.No. ItemCode

Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount BiddingUnit

Schedule 1-SOR-(Schedule-A)Execution of Out Door Signalling work 11156880.00

1

1 2.00 Kilometre 92115.00 184230.00 AT Par 184230.00Above/

Below/Par

Description:- Excavation of trench and clearing of roots of trees, bushes, ballast and reconditioning etc.,including bailing out water and disposal of extra soil. all soils including soft rocky area.Depth 1.2 Mtr. & width 0.3Mtr. [SOR-2021 for S&T works- Sch 'A' item no. 1(i)(a)]

2


Below/Par

Description:- Excavation of trench and clearing of roots of trees, bushes, ballast and reconditioning etc.,including bailing out water and disposal of extra soil. all soils including soft rocky area. Depth 1.0 Mtr. & width 0.3Mtr. [SOR-2021 for S&T works- Sch 'A' item no. 1(i)(b)]

3


Below/Par

Description:- Excavation of trenches including clearing of roots of trees etc. in hard/rocky soil by chiseling up to adepth of minimum 0.6 Mtr. and width 0.3 Mtr. at the bottom, supply and placing RCC hume pipe section as perdrawing on sieved soil of 30mm over cable / HDPE pipe and concreting through - out the length upto a layer of75mm. Then back filling the trench and then ramming of soil .[SOR-2021 for S&T works- Sch 'C' item no.2b]

4

4 250.00 Metre 115.00 28750.00 AT Par 28750.00Above/

Below/Par

Description:- Hard rocky area including concreting. Chase cutting and smoothening of inside surface of sizes0.08 m deep and 0.17 m width at platform and cemented floor area. [SOR-2021 for S&T works- Sch 'A' item no.1(ii)(a)]

5

5 500.00 Numbers 582.00 291000.00 AT Par 291000.00Above/

Below/Par

Description:- Hard rocky area including concreting. Cutting the masonary wall to the depth of 0.25m to 0.75m atthe entry of room placing of flexible HDPE pipe or G.I.Pipe (including supply) of suitable size as per drawing No.RE/S&T/ALD/SK/161/81. [SOR-2021 for S&T works- Sch 'A' item no. 1(ii)(b)]

6


Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53

PROJ-NGP-S AND T/SOUTH EAST CENTRAL RLYTENDER DOCUMENT

Tender No: 127-ST-P-NGP-AutoSig-EI-M Closing Date/Time: 22/08/2022 15:00

6 Description:- Track crossing, Road Crossing by pushing method (HDD method) at culverts/ track / pucca roadcrossing at a depth not less than 1 meter with reference to bottom of rail/road surface including supply of HDPEpipe . HDPE pipe/DWC pipe(4 inch dia) [SOR-2021 for S&T works- Sch 'A' item no. 1(iii)(a)]

8


Below/Par

Description:- Laying of Signalling Cable/Power/Quad cable / PIJF cable in the excavated trench toDrg.No:CON/SK/T/5.Transportation, supply of 'U' clamps and anchoring of cable at every 10 Mtrs with 'U' clamp toDrg.No:CSTE/C/Cable/81 including back filling with excavated earth and ramming of trenches after cable laying.[SOR-2021 for S&T works- Sch 'A' item no. 2(a)]

9


Below/Par

Description:- Laying of Power cable in the same excavated trench to Drg.No:CON/SK/T/5.Transportation, supplyof 'U' clamps and anchoring of cable at every 10 Mtrs with 'U' clamp to Drg.No:CSTE/C/Cable/81. Transportation,supply and placement of 2nd class bricks in the trench length wise between power cable & other signalling/quadcable in the same trench all along the trench(4.5 bricks approx. per Mtr.) including back filling with excavatedearth and ramming of trenches after cable laying.[SOR-2021 for S&T works- Sch 'A' item no. 2(b)]

10


Below/Par

Description:- Laying and Fixing of galvanised iron pipe(GI Pipe) with threaded collars (for jointing pipe) of 80/100mm nominal dia Spec.No.IS-1239 medium grade, on bridges, culverts, drains including supply and transportationof GI pipes and all other materials required for fixing the pipe to Drg.No.Con/SK/T/2 and drawing ofSignal/Power/Quad cables inside the pipe with masonary works over the entire length of the bridge and at entryand exit of the culvert and curing for 72 hrs, drilling of holes on the pipe at 10 cm apart to be clamped 2 Mtrs aparton culvert, for the Signalling, quad, power cable.[SOR-2021 for S&T works- Sch 'A' item no. 2(c)]

11


Below/Par

Description:- Laying of RCC pipe including supply of required quantity at site with collars (for jointing pipe)150mm nominal dia to Spec.No:IS-458 in excavated trench and laying of Signalling/ Power cable/PIJF cable/Quad cables/HDPE pipe through RCC pipe. Power cable shall be laid in the same trench alongwithsignalling/Quad cables but in a separate pipe RCC pipe at track/pucca road/ Platform crossing/ level crossinggate, etc. [SOR-2021 for S&T works- Sch 'A' item no. 2(d)]

12


Below/Par

Description:- Laying of Double Walled Corrogated Pipe length 6 meter, 120mm outer dia ,103.5mm inner diawith couplers as per specification no. BSEN 50086-2-4 for under ground power/communication /signal cableprotection and used for track/pucca road/ Platform crossing/ level crossing gate etc. [SOR-2021 for S&T works-Sch 'A' item no. 2(e)]

1313 100.00 Metre 254.00 25400.00 AT Par 25400.00

Above/Below/Par

Description:- Laying of half round RCC hume pipe with 150 mm dia. & 1 mtr long including supply at site onsingle/multiple cable laid in the trench. [SOR-2021 for S&T works- Sch 'A' item no. 2(f)]

1414 10.00 Kilometre 32603.00 326030.00 AT Par 326030.00

Above/Below/Par

Description:- Laying of second class bricks including supply of required quantity at site on single/multiple cablelaid in the trench (Approx. 9 bricks per mtr.). [SOR-2021 for S&T works- Sch 'A' item no. 2(g)]

15

15 170.00 Each 1282.00 217940.00 AT Par 217940.00Above/

Below/Par

Description:- Shifting of cables in roll with or without wooden drums from store of SSE/SIG/PROJ/CON/G Or BSPto work site and meggering before loading and after laying, and recording the values in cable insulation registeralong with representative of railways.[SOR-2021 for S&T works- Sch 'A' item no. 3]

16


Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53



Description:- The excavation of pit, casting of concrete foundation including surrounding earthwork along thefoundation, erection, installation and wiring of steel appartus case, fixing of terninals, fuse blocks, signaltransformer, current transformer, filament switching unit, track battery chargers,adjustable/fixed resistances,choke coils, Fuses, Relays, E type locks , termination of cables, cable insertion, wiring to draw 110V AC thereforein the new apparatus case as required , testing, commissioning including subsequent alterations(if required),bunching of cables, earthing of cable, armours etc. Painting of the apparatus case inside and outside afterclearing the surface thoroughly and first coating of anti -corrosive paint and subsequent two coatings ofAlluminium paint outside and Red Oxide inside and rubbar paint at bottom up to 6 inces and lettering.18 mmHylum sheet for location box self and 12 mm for cable termination in location box..Steel appartus case (Large) toDrg.No. CON/SK/T/8 with 4 Nos. of foundation bolts 20mm x 460mm to Drg.No. SA-112 A/M.[SOR-2021 for S&Tworks- Sch 'A' item no. 4(a)]

17


Below/Par

Description:- The excavation of pit, casting of concrete foundation including surrounding earthwork along thefoundation, erection, installation and wiring of steel appartus case, fixing of terninals, fuse blocks, signaltransformer, current transformer, filament switching unit, track battery chargers,adjustable/fixed resistances,choke coils, Fuses, Relays, E type locks , termination of cables, cable insertion, wiring to draw 110V AC thereforein the new apparatus case as required , testing, commissioning including subsequent alterations(if required),bunching of cables, earthing of cable, armours etc. Painting of the apparatus case inside and outside afterclearing the surface thoroughly and first coating of anti -corrosive paint and subsequent two coatings ofAlluminium paint outside and Red Oxide inside and rubbar paint at bottom up to 6 inces and lettering.18 mmHylum sheet for location box self and 12 mm for cable termination in location box.Steel appartus case (half) with 4Nos. of foundation bolts 20mm x 460mm to Drg.No. SA-112 A/M [SOR-2021 for S&T works- Sch 'A' item no. 4(b)]

18


Below/Par

Description:- The excavation of pit, casting of concrete foundation including surrounding earthwork along thefoundation, erection, installation and wiring of steel appartus case, fixing of terninals, fuse blocks, signaltransformer, current transformer, filament switching unit, track battery chargers,adjustable/fixed resistances,choke coils, Fuses, Relays, E type locks , termination of cables, cable insertion, wiring to draw 110V AC thereforein the new apparatus case as required , testing, commissioning including subsequent alterations(if required),bunching of cables, earthing of cable, armours etc. Painting of the apparatus case inside and outside afterclearing the surface thoroughly and first coating of anti -corrosive paint and subsequent two coatings ofAlluminium paint outside and Red Oxide inside and rubbar paint at bottom up to 6 inces and lettering.18 mmHylum sheet for location box self and 12 mm for cable termination in location box..Steel appartus case (Quarter)to Drg.No. RE/S&T/Sig./Tender/SK/5A/91 with 4 Nos. of foundation bolts of size 20mm x 300mm.[SOR-2021 forS&T works- Sch 'A' item no. 4(c)] NOTE: - Payment can be released in a part for the above said work aftercompletion of- (i) Foundation- 30%, (ii) Errection - 15% (iii) Wiring, testing, painting,sand filling, plastering,earthing & writings etc - 45% ,,(iv) Commissioning - 10% of the rate.

19


Below/Par

Description:- Alteration/ Modifications in the existing location boxes, fixing of equipments, cable insertion,termination, wiring, testing & commissioning, two coat painting, lettering to suit the circuits as per approved wiringdiagrams. This includes filling with sand and plastering the same. [SOR-2021 for S&T works- Sch 'A' item no. 5(a),(b)]

20

20 120.00 Each 1941.00 232920.00 AT Par 232920.00Above/

Below/Par

Description:- Excavation of earth pit, transportation, placing and fixing of earth electrode with construction ofcement encloser to Drg.No.CON/SK/T/9 and CON/SK/T/9A and drawal of GI wire wrapped on MS strip (35 x 6mm) from earth electrode to all signalling equipments, including fixing and soldering of lugs at both end of the wirewith stainless steel nut bolts. [SOR-2021 for S&T works- Sch 'A' item no. 8]

21


Below/Par

Description:- Installation of signal posts for Multiple Aspect Colour Light Signals complete with signal units,bases,LED unit, fixing and wiring of current transformers of LED units, ladders & other fittings, excavation of pit,casting of cement concrete foundations with necessary water outlets, erection and fixing of complete fittings of thesignal/signal post with necessary earthed screen protection arrangement, including drawing of cable throughsignal posts, termination of cables, wiring, testing and commissioning, two coat painting and lettering, supply andfixing of speed boards,markers if required for the following:- NOTE:- The foundation for Multiple Aspect ColourLight Signal Post drg. No. Con/SK/T/12 and and the foundation bolts shall be of sizes 24 mm x 915 mm to Drg.No. SA- 116A/M and bolts for each foundation for above shall be of size 20 mm x 305 mm to Drg. No. SA-110A/M( 4 nos. for each) with two nuts and two washers each per bolt. 3 ASPECT/4 ASPECT[SOR-2021 for S&T works-Sch 'A' item no. 9(a)(ii)]


Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53



22 Description:- Fixing of calling-on signals/dependent shunt signals with enameled markers including drawing ofcable through the signal post, termination of cables, wiring, fixing of calling- on/dependent shunt signal legendboard, LED(shunt,calling on, A marker ,AG marker ), two coat painting and lettering, testing and commissioning asrequired. [SOR-2021 for S&T works- Sch 'A' item no. 9(c)]

23


Below/Par

Description:- Installation, testing and commissioning of Position Light shunt signal (Independent), posts completewith lamps/LED lamps,LED units, Bases and other fittings, excavation of pit, casting of cement concretefoundation , fixing of complete fittings of signal, LED lamps, current regulator including foundation bolts, washers,nuts, termination of cables, wiring, painting and lettering as required. NOTE:- The foundation for position lightshunt signal Drg. No. Con/SK/T/13 and bolts for each foundation for above shall be of size 20 mm x 305 mm toDrg. No. SA-110A/M ( 4 nos. for each) with two nuts and two washers each per bolt. [SOR-2021 for S&T works-Sch 'A' item no. 9(d)]

24


Below/Par

Description:- Alteration/modification, testing, commissioning, two coat painting, lettering of the existing 2Aspect/3 Aspect/4 aspect signals/shunt signals/calling on signal/ LC gate to suit the circuit per approved wiringdiagram including fixing of LED/Singal lamps and their wiring.[SOR-2021 for S&T works- Sch 'A' item no. 11(a)]

2525 2.00 Each 5094.00 10188.00 AT Par 10188.00

Above/Below/Par

Description:- Supply & Erection alongwith casting of foundation of Stop board /Sighting board/SLB/BSLB/legendboard as per approved drawings. [SOR-2021 for S&T works- Sch 'A' item no. 12(a)]

26

26 3.00 Set 17912.00 53736.00 AT Par 53736.00Above/

Below/Par

Description:- Erection and commissioning of Lifting Barrier assembly complete including boom support, positiveboom locking device, Emergency crank handle attechment, Timer unit to adjust the time for operating the barrier,Fixing of Hooters/Flashers on either side of gate barriers, 1 (one) control panel, weather proof painting, lettering,Neccessary MS weight for balancing the booms, etc.[SOR-2021 for S&T works- Sch 'A' item no. 15]

2727 5.00 Numbers 232.00 1160.00 AT Par 1160.00

Above/Below/Par

Description:- Dismantling: - Signal posts/BSLB/SLB/Stop Board.[SOR-2021 for S&T works- Sch 'A' item no. 16(I)]

2828 20.00 Numbers 232.00 4640.00 AT Par 4640.00

Above/Below/Par

Description:- Dismantling :Steel apparatus case with fittings.[SOR-2021 for S&T works- Sch 'A' item no. 16(ii)]

2929 4.00 Numbers 360.00 1440.00 AT Par 1440.00

Above/Below/Par

Description:- Dismantling:- Relay racks with all fittings, battery racks complete, Equipment rack complete, SM'sslide.[SOR-2021 for S&T works- Sch 'A' item no. 16(iii)]

3030 10.00 Numbers 229.00 2290.00 AT Par 2290.00

Above/Below/Par

Description:- Dismantling:- Battery charger, Battery set etc.TLBI, DLBI and other Misc. equipments.[SOR-2021for S&T works- Sch 'A' item no. 16(iv)]

3131 3.00 Numbers 3623.00 10869.00 AT Par 10869.00

Above/Below/Par

Description:- Dismantling:- Lifting barrier complete.[SOR-2021 for S&T works- Sch 'A' item no. 16(vi)]

3232 3.00 Station 2415.00 7245.00 AT Par 7245.00

Above/Below/Par

Description:- Dismantling:- Operating cum indication Panel.[SOR-2021 for S&T works- Sch 'A' item no. 16(ix)]

3333 4.00 Numbers 1087.00 4348.00 AT Par 4348.00

Above/Below/Par

Description:- Dismantling:- Location Foundation(By hydraulic breaker)[SOR-2021 for S&T works- Sch 'A' item no.16(x)]

3434 2.00 Numbers 2174.00 4348.00 AT Par 4348.00

Above/Below/Par

Description:- Dismantling:- Signal Foundation(upto ground level by hydraulic breaker).[SOR-2021 for S&T works-Sch 'A' item no. 16(xi)]

35

35 4000.00 MT-Km 38.00 152000.00 AT Par 152000.00Above/

Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53



35Description:- Collecting, stacking with deployment of Man power, Hydra etc for Loading/ Unloading andTranspotation of Materials (Fresh/Released/ Unused) from (i) work site to GSD/Raipur, (ii) work site to the stotreof SSE(SIG)/PROJECT,(iii) any store depot to any other store depot over Indian railway as decided by RailwayAdministation by suitable Trucks and stacking properly.[SOR-2021 for S&T works- Sch 'A' item no. 17]

36


Below/Par

Description:- Execution of straight through joint on Quad cable/10-20-50 pairs PIJF cable using thermoshrinkjointing kit. This includes jointing kit, transformers, excavation of cable joint pit of size 1.2m x 1.2m x 1.0m forjointing of cables, back filling and ramming after jointing. [SOR-2021 for S&T works- Sch 'A' item no. 20]

37

37 5.00 Set 3832.00 19160.00 AT Par 19160.00Above/

Below/Par

Description:- Installation, testing and commissioning of track circuits as per Drg.No:SK/DRG/OL/27 and trackbonding plan including drilling of 9/32" holes on rails, provision of bonding, block joints (90R/52Kg/60 Kg) withmachined fish plate or Glued Joints, fixing and painting of track lead junction boxes, fixing of 25 mm nominal diaGI pipe of required length with 9/32" holes at 10 cm. apart for protection of tail cables, insulation of lead wiresfrom rails using heat shrinkable tape, insulation of traction bonds below rails with 3mm thick heat shrinkable tapes,fixing of lead wire suitably with sleepers. Provision of tail cable termination, fixing of track lead wires, jumper wires,terminals, track charger,adjustable/fixed resistance, choke coil, fuses, battery, track relay etc., and alsolettering/numbering of track lead junction boxes, block joints and track circuits.Straight portion of track circuit.[SOR-2021 for S&T works- Sch 'A' item no. 21(a)]

38

38 10.00 Hour 603.00 6030.00 AT Par 6030.00Above/

Below/Par

Description:- Deployment of Prokline/ Hydra operation at site for exposing the burried cables or relocation theLocation Box/ Signal Post with foundation as per the advice of Railway site engineer.[SOR-2021 for S&T works-Sch 'A' item no. 28]

39

39 20.00 Man-Days 266.00 5320.00 AT Par 5320.00Above/

Below/Par

Description:- Supply of Unskilled labour for immediate restoration of normal traffic by jointingSignalling/Telecom/Power cables of damaged during excavation of earth work of engineering department or forshifting, stacking of stores materials. Unskilled staff will remain available in working hour's.[SOR-2021 for S&Tworks- Sch 'A' item no. 29]

40

40 450.00 Hour 415.00 186750.00 AT Par 186750.00Above/

Below/Par

Description:- Fixing of concrete cable route marker at 30-40 meter and at diversion point including supply &transportation of cable route marker at site. Detail size & fixing of cable route marker should be followed as perdrawing no. SDO/Cable laying/020.[SOR-2021 for S&T works- Sch 'A' item no. 32]

41

41 1.00 Lumpsum 60377.00 60377.00 AT Par 60377.00Above/

Below/Par

Description:- Small value Engg. items, required if any to be executed at site as per advise of DyCSTE/proj, shallbe paid as per prevailing SOR of Engg. deptt. of SECR at the time of execution. [SOR-2021 for S&T works- Sch 'A'item no. 36]

42


Below/Par

Description:- Track crossing, Road Crossing by pushing method (HDD method) at culverts/ track / pucca roadcrossing at a depth not less than 1 meter with reference to bottom of rail/road surface including supply of GI pipe .GI pipe with 76 mm dia, Spec. No. -1239 medium grade (for the length of pushing more than 05 meters).[SOR-2021 for S&T works- Sch 'A' item no. 1(iii)(b)]

S.No. ItemCode

Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit

Schedule 2-SOR-(Schedule-A1) Execution of Indoor Signalling Works. 835437.00

11 10.00 Numbers 48363.00 483630.00 AT Par 483630.00

Above/Below/Par

Description:- Q-series/Composite Relay Racks and cable termination racks (New).[SOR-2021 for S&T works-[SOR-2021 for S&T works- Sch 'A1' item no. 1(a)]

22 10.00 Numbers 19785.00 197850.00 AT Par 197850.00

Above/Below/Par

Description:- Alteration of existing Q-series/Composite Relay Racks and cable termination racks.[SOR-2021 forS&T works- Sch 'A1' item no. 1(b)]

3 8.00 Each 507.00 4056.00 AT Par 4056.00Above/

Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53



3 Description:- Installation and wiring of Rotary key transmitters/KLCR on teak wood board enclosed inside asuitable box with front transparent check cover with locking arrangement. This includes 3/4" thick teak woodboards, transparent sheet for box, locking arrangement. 2 nos.of locks for box and 1 No. lock for fronttransparent sheet.[SOR-2021 for S&T works- Sch 'A1' item no. 2]

4

4 230.00 Each 310.00 71300.00 AT Par 71300.00Above/

Below/Par

Description:- Installation and wiring of Rotary key transmitters/KLCR on teak wood board enclosed inside asuitable box with front transparent check cover with locking arrangement. This includes 3/4" thick teak woodboards, transparent sheet for box, locking arrangement. 2 nos.of locks for box and 1 No. lock for fronttransparent sheet.[SOR-2021 for S&T works- Sch 'A1' item no. 2]

5

5 2.00 Dozen 8876.00 17752.00 AT Par 17752.00Above/

Below/Par

Description:- Installation, cable termination, wiring, testing & commissioning of Integrated power supply panel asper approved power supply diagram and specification. The contactor has to supply arrangements at central relayroom, goomties on original tracing paper of size 60cm.x42cm. with 8 computer prints in the format supplied byrailways.[SOR-2021 for S&T works- Sch 'A1' item no. 06]

55 2.00 Numbers 3309.00 6618.00 AT Par 6618.00

Above/Below/Par

Description:- Installation testing commssioning ogf Distilled water plant/demineralised plant.[SOR-2021 for S&Tworks- Sch 'A1' item no. 09]

77 10.00 Numbers 999.00 9990.00 AT Par 9990.00

Above/Below/Par

Description:- Installation, cable termination, wiring, testing of magneto telephones.[SOR-2021 for S&T works-Sch 'A1' item no. 13]

88 5.00 Numbers 786.00 3930.00 AT Par 3930.00

Above/Below/Par

Description:- Installation, cable termination, testing and commissioning of 10/20/50 Pair C.T.Boxes.[SOR-2021for S&T works- Sch 'A1' item no. 14]

9

9 5.00 Station 1242.00 6210.00 AT Par 6210.00Above/

Below/Par

Description:- Wiring of door detection Proximity switch to the tag block of dataloggers/RTU (This includesprovision of casing and capping and other wiring accessories, excluding 16/0.2 wire which will be supplied byRailways). This includes incorporation of this contact in datalogger simulation & datalogger report.[SOR-2021 forS&T works-Sch 'A1' item no. 16(a)]

10


Below/Par

Description:- Installation, testing of door contacts and validation and proximity switch data throughDataloggers/RTU. This includes incorporation of this contact in datalogger simulation & datalogger report.[SOR-2021 for S&T works-Sch 'A1' item no. 16(b)]

1111 5.00 Station 1242.00 6210.00 AT Par 6210.00

Above/Below/Par

Description:- Development of door 'close and open' software logics module & its implementation.[SOR-2021 forS&T works-Sch 'A1' item no. 16(c)]

12


Below/Par

Description:- Alteration Modification, cable termination, wiring, testing & commissioning of existing Integratedpower supply panel as per approved power supply diagram and specification. The contactor has to supplyarrangements at central relay room, goomties on original tracing paper of size 60cm.x42cm. with 8 computerprints in the format supplied by railways.[SOR-2021 for S&T works-Sch 'A1' item no. 18]

S.No. ItemCode


Schedule 3-SOR(Schedule-A2) Signalling Design and Drawing 651472.00

11 130.00 Sheet 1004.00 130520.00 AT Par 130520.00

Above/Below/Par

Description:- Design and development of Route Control Chart (RCC) in size B(A3) as per SEM.[SOR-2021 forS&T works- Sch 'A2' item no. 1(a)]

2


Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53



Description:- Design and development of Front Plate Diagram(FPD) conventional/Dual VDU FPD in size W(A1)as per SEM.[SOR-2021 for S&T works- Sch 'A2' item no. 1(b)]

33 3.00 Numbers 5024.00 15072.00 AT Par 15072.00

Above/Below/Par

Description:- Design and development of Station working rule Diagram (SWRD)based on SIP of station in sizeU(A3) as per SEM.[SOR-2021 for S&T works- Sch 'A2' item no. 1(c)]

44 3.00 Numbers 2511.00 7533.00 AT Par 7533.00

Above/Below/Par

Description:- Design & development of cable corage plan in size U(A3) as per SEM. [SOR-2021 for S&T works-Sch 'A2' item no. 1(d)(i)]

55 3.00 Station 1256.00 3768.00 AT Par 3768.00

Above/Below/Par

Description:- Design & development of cable route plan in size U(A3) as per SEM.[SOR-2021 for S&T works-Sch 'A2' item no. 1(d)(ii)]

66 100.00 Sheet 1004.00 100400.00 AT Par 100400.00

Above/Below/Par

Description:- Design and development of Circuit Diagram in size B(A3) as per SEM. sheet including contactanalysis.[SOR-2021 for S&T works- Sch 'A2' item no. 1(e)]

77 100.00 Sheet 1004.00 100400.00 AT Par 100400.00

Above/Below/Par

Description:- Other Signalling Drawing in size U(A3) as per SEM sheet(wiring in location box).[SOR-2021 forS&T works- Sch 'A2' item no. 1(f)]

88 3.00 Numbers 125.00 375.00 AT Par 375.00

Above/Below/Par

Description:- Maintenance Register as per Requirement.[SOR-2021 for S&T works- Sch 'A2' item no. 1(g)]

99 3.00 Numbers 1004.00 3012.00 AT Par 3012.00

Above/Below/Par

Description:- Miniature diagram in size B(A3).[SOR-2021 for S&T works- Sch 'A2' item no. 1(h)]

1010 2000.00 Numbers 125.00 250000.00 AT Par 250000.00

Above/Below/Par

Description:- Approval for safety aspect of Circuit diagram by contractor not below than retired SS officer ifrequired.[SOR-2021 for S&T works- Sch 'A2' item no. 1(i)]

1111 3.00 Station 5024.00 15072.00 AT Par 15072.00

Above/Below/Par

Description:- Development of SIP based on ESP on size W(A1) [SOR-2021 for S&T works- Sch 'A2' item no.1(j)]

1212 100.00 Numbers 2.00 200.00 AT Par 200.00

Above/Below/Par

Description:- Photocopy of various drawing in A3 size paper single side.[SOR-2021 for S&T works- Sch 'A2' itemno. 1(k)]

S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit

Schedule 4-SOR (Schedule-B) Supply of Ferrus Materrials 83400.00

11 50.00 Numbers 226.00 11300.00 AT Par 11300.00

Above/Below/Par

Description:- Negative Bus bar16 way 18 ". Inspection by Rep. of CSTE/PROJ/BSP.[SOR-2021 for S&T works-Sch 'B' item no. 23]

2

2 100.00 Kg 59.00 5900.00 AT Par 5900.00Above/

Below/Par

Description:- Wire IG 8 SWG for Bonding. Insp. by : Rep. of Railway Engineer. Note:-This item will be issued tocontractor from Railway store only for picking of existing track circuits during Pre-Pre-NI & Pre-NI work.[SOR-2021 for S&T works- Sch 'B' item no. 32]

3


Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53



Description:- PVC insulated GI flexible wire for lead wire of track circuit used in Railway signalling. Dia 6mm (19Sqmm cross sectional area) Constrction 7x7 core WSC. Lay Right Hand ordinary. Finish Galvanised. Tensilestrength 125-140kgf/sqmm. Confirming to IRS S3-61. PVC thickness 1mm. O.D. 8mm. Colour of PVC Red- 50%& Black-50%. Make:Bharat or similar. Inspection by Rep. of Railway Engineer. Note:- This item will be issued tocontractor from Railway store only for picking of existing track circuits during Pre-Pre-NI & Pre-NI work.[SOR-2021 for S&T works- Sch 'B' item no. 33]

4


Below/Par

Description:- Channel pin 7 mm dia. Inspection by: Representative of Railway Engineer. Note: - This item will beissued to contractor from railway store only for picking of existing track circuits during Pre-Pre-NI & Pre-NI work.[SOR-2021 for S&T works- Sch 'B' item no. 34]

S.No. ItemCode


Schedule 5-SOR(Schedule-B1) Supply of Signalling Battery (Secondary Cell) 1162880.00

1


Below/Par

Description:- Low maintenance lead acid stationary secondary cells for S&T installations made of hard rubbercontainer and with initial charging of nominal voltage 2 volts as per Specn.No.IRS-S-88/2004 with latest amd.Inspection by RDSO.120 AH[SOR-2021 for S&T works- Sch 'B1' item no. 1a(i),(ii),(iii),]

S.No. ItemCode


Schedule 6-SOR(Schedule-B2) Supply of Signalling Materials 3092322.00

1


Below/Par

Description:- Cable PVC insulated single core unsheathed with plain annealed copper conductor as per thecolour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment. Inspection by RDSO. 7/0.75mm dia.(Red & Black)[SOR-2021 for S&T works- Sch 'B2' item no.1(i)(a)]

2


Below/Par

Description:- Cable PVC insulated single core unsheathed with plain annealed copper conductor as per thecolour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment. Inspection by RDSO. 16/0.2mm dia. (80% grey & 20% yellow)[SOR-2021 for S&T works- Sch 'B2' item no.1(i)(c)]

3


Below/Par

Description:- Cable PVC insulated single core unsheathed with plain annealed copper conductor as per thecolour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment. Inspection by RDSO.Jamperwires : 1x0.6 mm Dia. ( In combination of colours as desired by Railways).Jamper wires : 1x0.6 mm Dia. ( Incombination of colours as desired by Railways).[SOR-2021 for S&T works- Sch 'B2' item no.1(i)(d)]

4


Below/Par

Description:- Cable PVC insulated single core unsheathed with plain annealed copper conductor as per thecolour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment. Inspection by RDSO. Indoorcable as per IRS-S-76/89 with latest ammendment. 60x0.6 mm dia, [SOR-2021 for S&T works- Sch 'B2' itemno.1(i)(e)]

5


Below/Par

Description:- Cable PVC insulated single core unsheathed with plain annealed copper conductor as per thecolour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment. Inspection by Rep. ofCSTE/PROJ/BSP.Multi strand ISI copper cable (10 Sq.mm ) (Red-45%, Black-45% & Green-10%).[SOR-2021 forS&T works- Sch 'B2' item no.1(ii)(d)]

6


Below/Par

Description:- Cable PVC insulated single core unsheathed with plain annealed copper conductor as per thecolour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment. Inspection by Rep. ofCSTE/PROJ/BSP.Multi strand ISI copper cable (16 Sq.mm ) (Red-45%, Black-45% & Green-10%).[SOR-2021 forS&T works- Sch 'B2' item no.1(ii)(e)]

7


Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53



7Description:- (a) Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 VAC/DC fuse with cylindrical cap without indication size :14x 51 mm. Spec. no: IRS-S-78/92 with latest amendmentif any. Inspection by RDSO.(iii) 04 Amp fuse catridge.[SOR-2021 for S&T works- Sch 'B2' item no.4(a)(iii)]

8


Below/Par

Description:- (a) Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 VAC/DC fuse with cylindrical cap without indication size :14x 51 mm. Spec. no: IRS-S-78/92 with latest amendmentif any. Inspection by RDSO.(iv) 06 Amp fuse catridge.[SOR-2021 for S&T works- Sch 'B2' item no.4(a)(iv)]

9


Below/Par

Description:- (a) Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 VAC/DC fuse with cylindrical cap without indication size :14x 51 mm. Spec. no: IRS-S-78/92 with latest amendmentif any. Inspection by RDSO.(v) 16 Amp fuse catridge.[SOR-2021 for S&T works- Sch 'B2' item no.4(a)(v)]

10


Below/Par

Description:- ARA terminal for Signalling Installation with PBT material.6 Way (ARA terminal) Drg No.SA-23756Alt3, Specn No. IRS-S-75/2006 (Rev.-2) with latest amd.Inspection by RDSO.[SOR-2021 for S&T works- Sch 'B2'item no.5]

11


Below/Par

Description:- Wago / phoneix terminal blocks (Part no.280-874). 4 conductor disconnect terminal block.Inspection by Rep. of CSTE/PROJ/BSP.[SOR-2021 for S&T works- Sch 'B2' item no.6(a)]Its includs: -(i) 4conductor disconnect terminal block for test and measurement; 0.08 mm.sq.- 2.5mm.sq., Center marking with slottest for test plug dia 2mm/0.079 In and dia 2.3mm/0.091 in; Carrier rail din 35: front-entry; with knife disconnectlarge cage clampconnection, grey.(ii) End and intermediate plate, 2.5 Mm/0.394 in wide carrier rail din 35, grey(Wago part no. 249-117)(iii) Screw end stop for carrier rail,(iv) steel carrier rail;35 X 7.5 mm, 1 mm /0.039 in thick;unslotted (Part no. 210-229/PW11-0000).,(iv) steel carrier rail;35 X 7.5 mm, 1 mm /0.039 in thick; unslotted (Partno. 210-229/PW11-0000).,(v) WSB quick marking system; horizontal; 1 ... 10 (10x); for width 5-17.5 Mm; 10 stripsof (v) 10 marker per strip (100) per card; consecutive numbers white (Part no. 209 - 502S).(vi) Adjacent jumpernominal current 24A; Insulated Grey.

12


Below/Par

Description:- Supply of clip on meter AC/DC with carrying case make Fluke or similar with standard accessoriesalong with engineering and operating manual. Inspection by Rep. of CSTE/PROJ/BSP.[SOR-2021 for S&T works-Sch 'B2' item no.17]

13


Below/Par

Description:- Supply of different type of dominoes complete with button assemblies and indication to suite formodification of the existing operation cum indication panel as per approved Front Plate Diagram. Inspection byRep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'B2' item no.21]

14


Below/Par

Description:- Supply of disitilled water plant/Demineralised palnt of (10-50-100 liter per hour) makeLaptech/shivam or indicated by Railways. Inspection by Rep. of CSTE/PROJ/BSP.[SOR-2021 for S&T works- Sch'B2' item no.18]

15


Below/Par

Description:- Supply of Double Walled Corrogated Pipe length 6 meter, 120mm outer dia ,103.5mm inner diawith couplers as per specification no. BSEN 50086-2-4 for under ground power/communication /signal cableprotection. One six meter pipe with collar at both end shall be counted a unit for the purpose of payment.Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'B2' item no.26]

16


Below/Par

Description:- Supply of IPS DC-DC converter 24-32V DC 10Amp. as per specification No. RDSO/SPN/165/2012,version-3.0 or latest. Make:M/s Statcon Ltd, compatable for the M/s Statcon IPS . Inspection by Rep. of RailwayEngineer.[SOR-2021 for S&T works- Sch 'B2' item no.23(b)]

S.No. ItemCode


Schedule 7-SOR(Schedule-B3)Supply of Electrical and Electronics Materials 30434811.00

of 27 Run Date/Time: 20/08/2022 13:39:53



1


Below/Par

Description:- (c) Relay, AC Immune, plug-in type, Style "QNAI', Neutral line, 24V DC 12F.4B contacts, front andback contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:931A, IRS:S 60,IRS:S 34 & IRS:S 23. The interlocking code for this unit shall be ABDFH . Inspection by RDSO.[SOR-2021 for S&Tworks- Sch 'B3' item no.1(c)]

2


Below/Par

Description:- (d) Relay, AC Immune, plug-in type, Style "QNAI'', Neutral line, 24V DC 8F.8B contacts, front andback contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:931A, IRS:S 60,IRS:S 34 & IRS:S 23.The interlocking code for this unit shall be ABDGH. Inspection by RDSO.[SOR-2021 for S&Tworks- Sch-B3-1(d)]

3


Below/Par

Description:- (e) Relay AC immune Plug in type Style'QNNA1, twin neutral line,24VDC 6F/2B contacts each forLH and RH, front and back contact metal to carbon , complete with plug board, retaining clips and connectorsconforming to BRS:960,IRS:S 60, IRS:S 34 & IRS:S 23. Interlocking code of this unit shall be CDEHX. Inspectionby RDSO.[SOR-2021 for S&T works- Sch-B3-1(e)]

4


Below/Par

Description:- (f) Relay AC immune Plug in type Style'QNNA1', twin neutral line,24VDC 4F/4B contacts each forLH and RH, front and back contact metal to carbon , complete with plug board, retaining clips and connectorsconforming to BRS:960,IRS:S 60, IRS:S 34 & IRS:S 23. Interlocking code of this unit shall be ACDHJ. Inspectionby RDSO.[SOR-2021 for S&T works- Sch-B3-1(f)]

5


Below/Par

Description:- (g) Relay Plug in type Style'QL1', Magenatically latched neutral line,24VDC 11F/4B contacts each,front and back contact metal to carbon , complete with plug board, retaining clips and connectors conforming toBRS:935A, IRS:S 34 & IRS:S 23. Interlocking code of this unit shall be ABDEG. Inspection by RDSO.[SOR-2021for S&T works- Sch-B3-1(g)]

6


Below/Par

Description:- (k) Relay Non- AC Immune, Plug in type, style 'QNN1', twin neutral line, 24V DC, 4F/4B contacts,each for LH & RH, front & back contacts metal to carbon, complete with plug board, retaining clips andconnectors, conforming to BRS: 960, IRS: S 34 & IRS : S23.The interlocking code for this unit shall be ACEHJ.Inspection by RDSO.[SOR-2021 for S&T works- Sch-B3-1(k)]

7


Below/Par

Description:- (l) Relay Non- AC Immune, Plug in type, style 'QNN1', twin neutral line, 24V DC, 6F/2B contacts,each for LH & RH, front & back contacts metal to carbon, complete with plug board, retaining clips andconnectors, conforming to BRS: 960, IRS: S 34 & IRS : S23.The interlocking code for this unit shall be ACDEK.Inspection by RDSO.[SOR-2021 for S&T works- Sch-B3-1(l)]

8


Below/Par

Description:- (m) Universal relay, plug in type, style AC/LED all aspects AC lamp proving relay unit with in builtcurrent transformer type, slow release neutral line relay 4F/4B contacts, front and back contacts metal to carbon,shall be suitable for working in series with the 110AC LED signal lamp rated at 15W conforming to RDSO specn.no. BRS:941A , STS/E/RELAYS/AC LIT/LED Signal/09-2002, Amdt-1 with latest. Inspection by RDSO.[SOR-2021for S&T works- Sch-B3-1(m)]

9


Below/Par

Description:- (n) Relay, AC Immune, plug-in type, Style "QNA1K", Neutral line, 24V DC 1000 ohms 6F.6Bcontacts, front and back contacts metal to carbon with plug board, retaining clip & connectors conforming toBRS:931A, IRS:S 60, IRS:S 34 & IRS:S 23 & RDSO Spec. no. STS/E/Relay/UEA(PI). The interlocking code for thisunit shall be CDEKY. Inspection by RDSO.[SOR-2021 for S&T works- Sch-B3-1(n)]

10


Below/Par

Description:- (r) Relay , Non-AC Immune, plug-in type, style "QS3", Neutral line, tractive armature, 12 V DC ,1000 ohm 4F.4B contacts, front contacts metal to carbon and back contacts metal / carbon, complete with plugboard, retaining clip & connectors conforming to BRS: 930A, IRS: S 34 & IRS: S 23. The interlocking code pin forthis unit shall be CDEKX. Inspection by RDSO.[SOR-2021 for S&T works- Sch-B3-1(r)]

of 27 Run Date/Time: 20/08/2022 13:39:53



1111 10.00 Pair 4414.00 44140.00 AT Par 44140.00

Above/Below/Par

Description:- Electronic Magneto telephone desk type to Specn No.IRS-TC-79/2000. Inspection by Rep. ofCSTE/PROJ/BSP.[SOR-2021 for S&T works- Sch-B3-3]

12


Below/Par

Description:- HP/OEM approved document scanner/Printer/Fax A3 /Legal size Resolution in dpi 300,speed inPPM 20, ADF capacity 50, Flate Bed Size NA, Document size legal or latest or similar. Inspection by Rep. ofCSTE/PROJ/BSP.[SOR-2021 for S&T works-Sch 'B3' item no. 29]

13

13 2.00 Each 7330.00 14660.00 AT Par 14660.00Above/

Below/Par

Description:- Hand Operated Earth tester 4 terminal type with complete testing kit, carrying case andmanufacturer calibration test certificate ,Nippen make or similar, Range : 0-10 Ohms. Inspection by Rep. ofCSTE/PROJ/BSP.[SOR-2021 for S&T works-Sch 'B3' item no. 32]

14

14 2.00 Each 6178.00 12356.00 AT Par 12356.00Above/

Below/Par

Description:- Hand Operated Insulation tester with test lead, carrying case and manufacturer calibration testcertificate ,Nippen make or similar, Range : 100 Volt , 100 M Ohms . Inspection by Rep. of CSTE/PROJ/BSP.[SOR-2021 for S&T works-Sch 'B3' item no. 33]

15

15 4.00 Each 6530.00 26120.00 AT Par 26120.00Above/

Below/Par

Description:- Hand Operated Insulation tester with test lead, carrying case and manufacturer calibration testcertificate ,Nippen make or similar, Range : 500 Volt , 200 M Ohms. Inspection by Rep. of CSTE/PROJ/BSP.[SOR-2021 for S&T works-Sch 'B3' item no. 34]

16


Below/Par

Description:- Supply of datalogger system for Railway S&T installation as per RDSO specification no. IRS:S-99/2006 (ammedent - 3) or latest with -Digital Input 512, Analog Input 64. Inspection by RDSO.[SOR-2021 for S&Tworks-Sch 'B3' item no. 5(a)(i)]

17


Below/Par

Description:- Installation, wiring, testing and commissioning of Digital Input 512, Analog Input 64 dataloggersystem as per RDSO specification no. IRS:S-99/2006 (ammedent - 3) or latest including networking and centralmonitoring along with installation of remote monitoring software and hardware. The contractor is also required tolist out the no. of analog & digital inputs for wiring & operation of the datalogger by taking approval of the Rly. forthose inputs. This includes training to 4 staffs at site.[SOR-2021 for S&T works-Sch 'B3' item no. 5(b)(i)]

18


Below/Par

Description:- Earthing and bonding system as per RDSO Spec. No. RDSO/SPN/197/2008, RDSO Drg.No.SDO/RDSO/E&B/001 dt. 19.09.08 and RDSO Drg. No. SDO/RDSO/E&B/002 dt. 19.09.08. Earthing andbonding system for Relay Room , IPS Room ,SPD Box,Operator panel in SM's room, signalling equipments inStation building, Block circuit, SSDAC,etc. Inspection by RITES. Supply of "Permanent and Maintenance FreeEarth pits materials".1 Set PMF earth pit consisting of: (i)17 mm diameter and minimum 3 m long Copper BondedSteel Rod - 1No(ii)GEM- 25 lb - 3 Bags(iii)25*6*150 mm Cu Bus Bar- 2 No(iv)Cu lugs and nut bolt 2 nos(v)Supplyfor Connection between Earthpits and MEBB It includes 35 sq mm multi-strand pvc insulated single core Cu cable(15 mtr Lump Sum).(vi)Supply for Internal connection from MEBB To SEBB and to other equipments.(50 mtrLump Sum).It includes 16 sq mm and 10 sq mm multi strand pvc insulated single core Cu cable.[SOR-2021 forS&T works-Sch 'B3' item no. 7(a)]

19


Below/Par

Description:- Control Panel for Mid section interlocked LC Gate/IBS(operation-cum indication console Dominotype)/ Siding motor operated point operation pannel /Non Interlocking pannel to RDSO Spec. No. 36/87 size ofeach domino will be 54+10mm X 34+7mm. 25% panel LEDs, all type of dominos and buttons assembliescompleate as spare to be supplied. This includes cable termination MS rack with 3/4" thick wood strips includingfabrication thereof as per the requirement of the Rly. terminations of cables, fix of terminal blocks, terminals,painting and lettering as required. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' itemno. 11]


Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53



20 Description:- Control Panel for Mid section interlocked LC Gate/IBS(operation-cum indication console Dominotype)/ Siding motor operated point operation pannel /Non Interlocking pannel to RDSO Spec. No. 36/87 size ofeach domino will be 54+10mm X 34+7mm. 25% panel LEDs, all type of dominos and buttons assembliescompleate as spare to be supplied. This includes cable termination MS rack with 3/4" thick wood strips includingfabrication thereof as per the requirement of the Rly. terminations of cables, fix of terminal blocks, terminals,painting and lettering as required. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' itemno. 11]

2121 30.00 Numbers 94567.00 2837010.00 AT Par 2837010.00

Above/Below/Par

Description:- Supply of VF tapping termination transformer to specification IRS-TC-22/76 for 470:1120,1120:600, 1120:1120. Inspection by Rep.of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 23]

22

22 8.00 Set 37882.00 303056.00 AT Par 303056.00Above/

Below/Par

Description:- Supply of fuse indication cum monitoring and automatic changeover system as per RDSOspecification no. RDSO/SPN/209/2012 Rev. 0 or latest. The system shall be supplied along with all standby fusesplaced in the system. In addition to it,spare quantity of 100% fuses of each type shall also be supplied along withthe system. Inspection by RDSO.For 32 fuses per set (Upto 4 Amps)[SOR-2021 for S&T works-Sch 'B3' item no.24(a)]

2323 8.00 Numbers 9469.00 75752.00 AT Par 75752.00

Above/Below/Par

Description:- Transportation, installation, testing & commissioning of fuse indication cum monitoring andautomatic changeover system as mentioned above.[SOR-2021 for S&T works-Sch 'B3' item no. 24(b)]

24


Below/Par

Description:- Supply of Earth Leakage Detector (12 nos. channel) as per RDSO specification no.RDSO/SPN/256/2002 or latest having 6 digit counter, 12 Channel bus bar voltage of 110 V / 60 V / 12 V in AC DCmeasurement in 19" sub rack along with insulation resistance meter, remote indication & buzzer in ASM room atstation of Bilaspur/Raipur/Nagpur Division. The tenderer should submit three years warranty certificate along withsupply of material. Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 25(a)]

2525 5.00 Numbers 32894.00 164470.00 AT Par 164470.00

Above/Below/Par

Description:- Transportation, installation, testing & commissioning of Earth Leakage Detector as mentionedabove.[SOR-2021 for S&T works-Sch 'B3' item no. 25(b)]

2626 12.00 Numbers 16241.00 194892.00 AT Par 194892.00

Above/Below/Par

Description:- Installation, testing and commissioning of Multi Section Digital Axle counter system as mentionedabove.[SOR-2021 for S&T works-Sch 'B3' item no. 31(b)]

27


Below/Par

Description:- Supply of Reset boxes complete compatible with the evaluation system supplied under item No.17above containing individual resetting arrangement of each track sections. Inspection by RDSO.Supply of 2C 1.5 sqmm twisted shielded armoured copper cable. Inspection by Rep. of Railway Engineer..[SOR-2021 for S&T works-Sch 'B3' item no. 21]

2828 200.00 Metre 124.00 24800.00 AT Par 24800.00

Above/Below/Par

Description:- Supply of 2C 1.5 sq mm twisted shielded armoured copper cable. Inspection by Rep. of RailwayEngineer..[SOR-2021 for S&T works-Sch 'B3' item no. 27(vii)]

2929 6.00 Numbers 37500.00 225000.00 AT Par 225000.00

Above/Below/Par

Description:- Supply of Single Line Directional Panel for Auto Signalling in 3rd Line with Dominos made of PBT &switches. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 43]

3030 6.00 Numbers 22500.00 135000.00 AT Par 135000.00

Above/Below/Par

Description:- Installation, testing & commissioning of Single Line Directional Panel for Auto Signalling in 3rd Linewith Dominos made of PBT & switches.[SOR-2021 for S&T works-Sch 'B3' item no. 44]

31


Below/Par

Description:- Installation, Wiring, Testing and commissioning of Remote terminal unit with 128 digital & 16 analoginputs with modem as per RDSO spec. no - IRS-S- 99/2006 or latest .[SOR-2021 for S&T works-Sch 'B3' item no.14(b)]

of 27 Run Date/Time: 20/08/2022 13:39:53



33


Below/Par

Description:- Supply of Multi Section Digital Axle counter system (MSDAC) having atleast 5 detection points and4 track section, including multiplexures cards, modems, BBT etc., if any, and fully equipped with all cards /modulesfor which system is designed conforming to RDSO as per specn. No. SPN/176/2005 or latest. This includes supplyof all the track side junction boxes, detection points, track clearance relays (preferably 'Q' series relays, resetpanel and all other accessories, including multiplexures, modems, cards, modules if any) to make the systemcomplete and fully equipped as design for. This also includes both manual and auto resetting system with co-operative type resetting features. All the multi section digital axle counters (MSDAC) equipment to be providedwith efficient, lightning and surge protections along with earthing arrangement which also to be supplied along withthe system. Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 31(a)]

S.No. ItemCode


Schedule 8-SOR(Schedule-C)Execution Telecom work. 678674.00

1


Below/Par

Description:- Transportation including loading/unloading of HDPE pipe from the stores of railway to the worksite, laying of the same (with 4 mm nylon rope pre-inserted inside the HDPE pipe) in excavated trench/alreadylaid GI/RCC pipes/tubes, jointing, levelling and end sealing the pipes. [SOR-2021 for S&T works- Sch 'C' item no.6]

2


Below/Par

Description:- Transportation, loading/unloading of OFC from the stores of railway to the work site with care,pushing/pulling OFC through the HDPE pipes, sealing of the duct by sealling /caps plugs. The cable is to be laidby mechanised means. At inaccessible places where mechanised laying is not possible, the cable is to be laidmanually by pulling through pre inserted rope. This also includes testing of cable drums in the store premisesbefore transportation and submissions of results thereof. Empty cable drums to be returned by the contractor.The cable drums with unused cable at site to be returned by the contractor to the stores depot ofSSE/SIG/PROJ/G.[SOR-2021 for S&T works- Sch 'C' item no. 7]

3


Below/Par

Description:- Supply and placing of warning tape Orange colour of 100 mm wide printed in black as "CAUTIONOFC CABLE" at every 1 mtr. interval (minimum) and to be laid in the trench in station area and as directed by therepresentative of Railway.[SOR-2021 for S&T works- Sch 'C' item no. 9(a)]

4


Below/Par

Description:- Transportation, installation of optical fibre joint closure and splicing of Optical fibre cable (2 x 24fibres) and testing, Optical fibre cable splicing shall be done in the presence of Railway's representative. Onlyjoint closure shall issued by the Railway. All other tools/test equipments required shall be arranged by theContractor. This also includes excavation of earth for construction of masonary pit of bricks (inside completeplastered), the inner size of pit 1.2m x 1.2m (depth 0.75m) in all types of soils for keeping cable coils at thelocation of OFC joints, filling the pit with sand after jointing of cables, ramming and covering with RCC slab as perDrg. and instructions of site incharge of Railway. [SOR-2021 for S&T works- Sch 'C' item no. 11(a)]

5


Below/Par

Description:- Transportation, installation of Optical Fibre termination box and splicing of Optic Fibre Cable (24fibre) inside the termination box with provision of taking out fibre of OFC as required. This includes supply ofinstallation accesories (as required) as detailed in technical specification and advised by Railway's Engineer-at-site. This also includes End to End testing of all fibres of the optical fibre cable terminated between cable hut tocable hut of each station. [SOR-2021 for S&T works- Sch 'C' item no. 11(b)]

6


Below/Par

Description:- Transportation & Execution of following kinds of joints on Quad Cable using thermoshrink jointingkit. This also includes excavation of cable joint pit of size 1.2m x 1.2m x 1.0m in all types of soil for jointing ofcopper cables, back filling and ramming after jointing. i) straight through joint on Quad cable/10-20-50 pairs PIJFCable [SOR-2021 for S&T works- Sch 'C' item no. 12(b)]


Schedule 9-SOR (Schedule-D)Supply of Telecom materials. 34540.00

of 27 Run Date/Time: 20/08/2022 13:39:53



1


Below/Par

Description:- Supply of Optical fibre joint closure for straight through joint with modification for 24 fibre OFC asper Specification. No. RDSO/SPN/TC/68/2013 (with latest amendment) complete with all accessories (sealingwith mechanical clamp facility) make raychem or similar. Inspection by RITES. [SOR-2021 for S&T works- Sch 'D'item no. 1]

2


Below/Par

Description:- Supply of Universal Thermoshrink Jointing kit for derivation/transformer joint for Jelly filled Sixquad cable conforming to RDSO Spec. No. : IRS-TC-77/2006 (Rev.-1) (with latest amendment). Inspection byRDSO.[SOR-2021 for S&T works- Sch 'D' item no. 3]


Schedule 10-SOR (Schedule-E)Execution of Civil Works 1043413.74

1

1 24.00 cum 88.16 2115.84 AT Par 2115.84Above/

Below/Par

Description:- Earth work in excavation as per approved drawings and dumping at embankment site or spoilheap, within railway land, including 50m lead and 1.5m lift, the lead to be measured from the centre of gravity ofexcavation to centre of gravity of spoil heap: the (Engg. SOR item no. 011011)

2

2 24.00 cum 9.20 220.80 AT Par 220.80Above/

Below/Par

Description:- Extra over item No.0110100 for excavation in foundation for buildings and bridges to coverdressing to neat dimension and plumbing sides etc. Note : Dressing under this item is payable for the totalquantity of excavation in foundation and not partly (Engg SOR item No. 012010)

33 24.00 Sqm 1539.01 36936.24 AT Par 36936.24

Above/Below/Par

Description:- PCC 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size)(Engg SOR itemNo. 031012)

4

4 72.00 Sqm 926.27 66691.44 AT Par 66691.44Above/

Below/Par

Description:- Kota stone slab flooring of size upto 20mm (average) thick base of 1:4 cement mortar (1cement:4coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab includingrubbing and polishing complete (Engg SOR item No.96072)

5

5 44.00 Sqm 854.21 37585.24 AT Par 37585.24Above/

Below/Par

Description:- Kota stone slab 25 mm thick kota stone slab thick in reset dado and pillars laid on 12mm (average)thick cement mortar 1:3 (1cement: 3coarse sand) and jointed with grey cement slurry mixed with pigment tomatch the shade of the slab, including rubbing and (Engg SOR item No. 96080)

66 50.00 cum 293.14 14657.00 AT Par 14657.00

Above/Below/Par

Description:- Supplying and spreading Moorum and sand of Moorum (Engg.SORitem No. 252020)

77 50.00 cum 120.97 6048.50 AT Par 6048.50

Above/Below/Par

Description:- Extra over items 011010 for spreading and finishing of fill material on embankment by manualmeans in accordance with specifications(Engg SOR Item No. 11030)

88 50.00 cum 16.40 820.00 AT Par 820.00

Above/Below/Par

Description:- Extra for watering and ramming earth in foundation and floors in 15cm layers. Note : This item ispayable where ramming is not included in the original rate for earthwork in filling.(Engg SOR item No.12030)

9

9 10.00 cum 1974.71 19747.10 AT Par 19747.10Above/

Below/Par

Description:- RCC M-25 in frame work including slab Providing and laying in position M 25 Grade concrete forreinforced concrete structural elements but excluding cost of centering, shuttering, reinforcement and Admixturesin recommended proportion (as per IS:9103) to accelerate, retard setting of concrete, improve workability withoutimpairing strength and durability as per direction of Engineer in charge (Engg SOR item No.41011))All work uptoplinth level, including raft foundation of washable aprons, HS tank, pile cap, footings of FOB, and Platform shelteretc.

1010 24.00 cum 2185.37 52448.88 AT Par 52448.88

Above/Below/Par

Description:- All work in buildings above plinth level upto floor two Level (Engg SOR item no. 41012)

of 27 Run Date/Time: 20/08/2022 13:39:53



11

11 80.00 Sqm 120.70 9656.00 AT Par 9656.00Above/

Below/Par

Description:- Centering and shuttering including strutting, propping etc. and removal of form for : Foundations,footings, bases of columns, raft foundation of washable aprons, Pile caps, Footings of FOB etc.(Engg SOR itemNo.42011

1212 21.00 Sqm 186.30 3912.30 AT Par 3912.30

Above/Below/Par

Description:- Lintels, beams, plinth beams, bed blocks, girders, bressumers and cantilevers (Engg SOR itemNo.42014

1313 90.00 Sqm 256.80 23112.00 AT Par 23112.00

Above/Below/Par

Description:- Colums, Pillars,Post and struts ( As per Engg SOR item No.42015)

1414 120.00 Sqm 211.62 25394.40 AT Par 25394.40

Above/Below/Par

Description:- Suspended floors, roofs, landings, balconies, FOB slabs, walkway slabs and access platform ( Asper Engg SOR item No.42013)

1515 44.00 cum 2083.69 91682.36 AT Par 91682.36

Above/Below/Par

Description:- Brick work with non-modular (FPS) bricks of class designation 7.5 in foundation and plinth in :Cement mortar 1:6 (1 cement : 6 fine sand)(Engg.SOR Item No. 51015)

1616 36.00 cum 150.26 5409.36 AT Par 5409.36

Above/Below/Par

Description:- Extra Over item 051010 and 051020 for brick work in superstructure beyond plinth levek upto(Engg SOR Item No.51040)

1717 130.00 Sqm 60.32 7841.60 AT Par 7841.60

Above/Below/Par

Description:- Plaster 12 mm cement plaster of mix 1:6(1 cement 6 fine sand)9Engg SOR item No.111012)

1818 200.00 Sqm 69.37 13874.00 AT Par 13874.00

Above/Below/Par

Description:- Plaste 15 mm cemeny plaster on the rough side of single or half brick wall of mix 1:6 (1 cement:6fine sand) (Engg SOR item No.111022)

19

19 110.00 Sqm 244.16 26857.60 AT Par 26857.60Above/

Below/Par

Description:- Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixedwith water proofing cement compound as per IS 2645 in layers (i) After surface preparation, 1st layer of slurry ofcement @ 0.488kg/ sqm mixed with water proof (Engg SOR item No 171220)

20

20 110.00 Sqm 94.57 10402.70 AT Par 10402.70Above/

Below/Par

Description:- Providing and laying cement concrete 1:2:4 in dampproof course (1 cement : 2 sand : 4 gradedstone aggregate 12.5mm nominal size - excluding the cost of cement and including providing, fixing and removalof forms. 25mm thick (Engg SOR item No.32051)

21

21 220.00 Sqm 72.86 16029.20 AT Par 16029.20Above/

Below/Par

Description:- White washing colour washing and painting Providing & applying plaster of paris putty of 2mmaverage thickness over plastered surface to prepare the surface even & smooth complete (Engg SOR itemNo.112040)

22

22 330.00 Sqm 61.73 20370.90 AT Par 20370.90Above/

Below/Par

Description:- Distempering with oil bound washable distemper of approved brand and manufacture to give aneven shade New work (two or more coats of distemper) over and including priming coat with distemper primer(Engg SOR item No.115042)

2323 70.00 Sqm 47.68 3337.60 AT Par 3337.60

Above/Below/Par

Description:- Painting with synthetic enamel paint of approved brand and manufacture to give an even shadeTwo or more coats on new work (Engg SOR item No. 121051)

24

24 12.00 Sqm 1906.02 22872.24 AT Par 22872.24Above/

Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53



Description:- Providing and fixing to IS: 2202 Part-1 marked flush door shutter decorative type, core of blockboard construction with frame of 1st class hard wood and well matched teak 3ply veneering with vertical grains orcross bands and face veneers on both faces o 35mm thick including ISI marked stainless steel butt hinges withnecessary screws (Engg SOR item No.72141)

2525 600.00 Kg 73.32 43992.00 AT Par 43992.00

Above/Below/Par

Description:- Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, squareor round bars etc. all complete Fixed to steel windows by welding(Engg SOR item No.74231)

26

26 120.00 Kg 99.13 11895.60 AT Par 11895.60Above/

Below/Par

Description:- Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections,joints mitered and welded with 15x3mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of1:3:6 (1cement : 3 coarse sand : 6 graded stone aggrega (Engg SOR item No.81270)

2727 380.00 cum 44.09 16754.20 AT Par 16754.20

Above/Below/Par

Description:- Providing wood work in frames of doors, windows, clerestory windows and other frames andtrusses, wrought, framed and fixed in position : Sal wood (Engg SOR item No.71012)

28

28 20.00 Sqm 1817.97 36359.40 AT Par 36359.40Above/

Below/Par

Description:- Providing and fixing panelled/glazed or panelled and glazed shutters for doors, windows andclerestory windows including ISI marked black enamelled M.S. butt hinges with necessary screws excluding,panelling/glazing which will be paid for separately Second class teak wood, 30mm thick

29

29 44.00 Each 63.57 2797.08 AT Par 2797.08Above/

Below/Par

Description:- Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts,nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1cement: 3coarsesand: 6graded stone aggregate 20mm nominal size) (Engg SOR item No.74280)

3030 14.00 Each 36.81 515.34 AT Par 515.34

Above/Below/Par

Description:- Providing and fixing M.S. tower bolts generally conforming to IS:204 (Part I) with necessary screwsetc. complete of size.150x10 mm 31 75073 (Engg.SOR item No.75063)

3131 14.00 Each 11.71 163.94 AT Par 163.94

Above/Below/Par

Description:- Providing and and fixing M.S. door handles with necessary screws etc. complete. 75mm (EnggSOR item No. 750073)

3232 28.00 Each 9.12 255.36 AT Par 255.36

Above/Below/Par

Description:- Providing and fixing MS hooks and eyes 150 mm (Engg SOR item No 7 5084)

33

33 4.00 Each 92.38 369.52 AT Par 369.52Above/

Below/Par

Description:- Providing and fixing M.S. fan clamp of 16mm dia M.S. bar bent to shape with hooked ends inR.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete(Engg SOR item No 81320)

3434 4350.00 Kg 52.48 228288.00 AT Par 228288.00

Above/Below/Par

Description:- Supplying Reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete. Thermo-Mechanically Treated bars (Engg SOR item 045016)

3535 32.00 MT 5750.00 184000.00 AT Par 184000.00

Above/Below/Par

Description:- Supply and using cement at worksite : OPC 43 grade (Engg SOR item No.(033061)

S.No. ItemCode


Schedule 11-NS-(Schedule-I)-Non SOR Items (Signalling Design & Drawing andexecution)

1363108.00

1

1 300.00 Per Page 75.00 22500.00 AT Par 22500.00Above/

Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53



Description:- Drafting, Correction, Editing and final Printing and binding of SWR/ GWR/Temporary working Rulesof station to suite the SWRD, SIP etc in both Hindi and English. After signature Printing and binding of theSWR/GWR in 06 copies.[Tender No: 107-ST-P-NGP-Auto-GDM-DUG-Tender-2017 ITEM A2(4)]

2

2 8.00 Day 35400.00 283200.00 AT Par 283200.00Above/

Below/Par

Description:- Arrangement for commissioning of station for the work of Non-Interlocking period at site suchasprovision of 2 Tent, 4 Table Chair (08 no. in each Tent) in general, Drinking water & other amenity, cap,UmbrellaTorch for 30 staff, Hand Gloves for 06 to 08 staff and arrangement of one vehicle at each work for thework of NIperiod for required commissioning of station for the work of Non-Interlocking period at site. Lighting arrangementsin Tents, in the Yard over point zone for proper working in the evening and night as required. Ifnecessary, DG hasto be arranged by the contractor on his own cost including Diesel, lubricant oil etc. Necessary arrangementsshould be done as adviced by the Railway site Engineer.[Tender No: 65-SNT-Proj-Tender-2022 Schedule 13-NS-(Schedule-I)- tems13]

3


Below/Par

Description:- Alteration of existing Data Logger, then testing and commissioning of the DATALOGGER as perRDSO's Spec. including networking and central monitoring along with installation of remote monitoringsoftwareand hardware. The contractor is also required to list out the no. of analog & digital inputs for wiring &operation of the datalogger by taking approval of the Rly. for those inputs. NOTE: The contractor has to supply allthe hardware & software required for networking & remote monitoring at his cost including training to 4 staffs atsite.[Tender No: 65-SNT-Proj-Tender-2022 Schedule 13-NS-(Schedule-I)-Items 24]

4


Below/Par

Description:- Supply of 'AG' MARKER LED Signal Lighting Unit 110V, AC retrofittable in existing CLS HOUSING.Inspection by Rep. of CSTE/PROJ/BSP. [Tender No: 65-SNT-Proj-Tender-2022 Schedule 13-NS-(Schedule-I)-Items 5]

5


Below/Par

Description:- Supply of 'A' MARKER LED Based Signal Unit 110V,AC suitable to fit in existing CLS HOUSING.Inspection by Rep. of Railway Engineer.[Tender No: 65-SNT-Proj-Tender-2022 Schedule 13-NS-(Schedule-I)-Items 4]

6


Below/Par

Description:- Supply of indicating type 0.6A fuse inserts with holder (material will be supplied only from approvedvendor of RDSO) as per IRS spec. IRS:s:78/92 or latest. .Inspection by Rep. of CSTE/PROJ/BSP [Tender No: 65-SNT-Proj-Tender-2022 Schedule 13-NS-(Schedule-I)-Items 49]

7

7 3.00 Set 220000.00 660000.00 AT Par 660000.00Above/

Below/Par

Description:- Station Monitoring panel for automatic signals and track circuits, programming, software,hardware, panel etc. and modification of station data logger. Data Concentrator.[LOA No. 261/ET-107/ST/P/NGP/Autosig/GDM-DUG/ 393 Dtd. 12-9-2018]

8


Below/Par

Description:- Marker/calling-on signals/dependent shuntsignals with enameled markers including drawing ofcable through the signal post, termination of cables, wiring, fixing of calling- on/shunt signal legend board,lamp/LED unit, two coat painting and lettering, testing and commissioning as required. NOTE: i) The foundationfor position light shunt signal post as mentioned in item above shall be in accordance with Drg. No. Con/SK/T/13.ii) 4 Nos. of foundation bolts for each foundation for above shall be of size 20 mm x 305 mm to Drg. No. SA-110A/M with one nut and one washer each per bolt & shall be supplied by the contractor. iii) All the materialsrequired for installation, wiring, testing & commissioning of calling on signals, dependent/independent shuntsignals, other than, will have to be supplied by the contractor. These sundry materials such as cement, sand,stone chips 1", bricks, nuts and bolts, washers and screws, eyelets of sizes, PVC bunching tape and button,soldering materials, screen with MS frame, calling on legend board as per Drg. supplied by the Railways, paints,M.S clamps with SS nuts and bolts for fixing of cable etc., and other such sundry materials required for the workshall be supplied by the contractor. The contractor has to supply the lampreplacement register with details filledtherein format supplied by the railways in printed well bound register. iv)Contractor has to fix markers/legendboards on signal posts as per the instruction of Railway site engineer.[Tender No: 65-SNT-Proj-Tender-2022Schedule 13-NS-(Schedule-I)-Items no. 6 ]

S.No. ItemCode


of 27 Run Date/Time: 20/08/2022 13:39:53



Schedule 12-NS-(Schedule-II)-Non SOR Items (Supply & Modification of existingElectronics interlocking (M/s Hitachi Make) and RRI

10006256.00

1

1 2.00 Per Unit 2656348.00 5312696.00 AT Par 5312696.00Above/

Below/Par

Description:- Modification/Alteration in existing El (Electronic Interlocking) as per latest RDSO guidelines/TAN. Itincludes: Design and modification in existing interface and Interlocking circuits and logic of El system including,modification in the VDU(Video Display Unit)/ LCP(Local Control panel)/ CCIP (Control cum Indication Panel).Maintenance terminal (MPC). Data Logger, Relay rack wiring. The complete work should comply with the latestRDSO specifications and guidelines and as per approved SIP and circuit diagrams. All the material (Interfacecards/relays/wiring material/connectors/fuses/communication devices etc.) shall be provided by the contractor.The work also includes the supply of modified Selection table, Interface Circuits. VDU/LCP/CCIP diagram etc. tosuit the modified SIP. It also includes the carrying out of FAT, SAT (as applicable) jointly with Railways andsatisfactory commissioning. All plans/drawings/circuits etc. should be prepared on AUTOCAD, softcopy to besupplied on Pen Drive and 06 sets of hard copies also to be supplied. Alteration involving, modification from 11 upto 20 routes. Here per unit stands for per station alterations. REF:- 65-SNT-Proj-Tender-2022Schedule 14-NS-(Schedule-J) ITEM NO 2

2

2 4.00 Per Route 265635.00 1062540.00 AT Par 1062540.00Above/

Below/Par

Description:- Modification/Alteration in existing El (Electronic Interlocking) as per latest RDSO guidelines/TAN. Itincludes: Design and modification in existing interface and Interlocking circuits and logic of El system including,modification in the VDU(Video Display Unit)/ LCP(Local Control panel)/ CCIP (Control cum Indication Panel).Maintenance terminal (MPC). Data Logger, Relay rack wiring. The complete work should comply with the latestRDSO specifications and guidelines and as per approved SIP and circuit diagrams. All the material (Interfacecards/relays/wiring material/connectors/fuses/communication devices etc.) shall be provided by the contractor.The work also includes the supply of modified Selection table, Interface Circuits. VDU/LCP/CCIP diagram etc. tosuit the modified SIP. It also includes the carrying out of FAT, SAT (as applicable) jointly with Railways andsatisfactory commissioning. All plans/drawings/circuits etc. should be prepared on AUTOCAD, softcopy to besupplied on Pen Drive and 06 sets of hard copies also to be supplied. Alteration more than 20 routes.REF:- 65-SNT-Proj-Tender-2022Schedule 14-NS-(Schedule-J) ITEM NO 4

33 25.00 Numbers 3952.00 98800.00 AT Par 98800.00

Above/Below/Par

Description:- Plug in type combinations of 2 nos of K-50 Neutral Relays type Rssk/30/0011. REFS&T/CON/Tender/653-HN-PI-MXA-RRI-Modi/334,dated 02/08/2018 sch B3 item no36

44 1.00 Station 3532220.00 3532220.00 AT Par 3532220.00

Above/Below/Par

Description:- Modification in existing panel system (RRI) for Automatic signalling.(This includes all the materialrequired for modification which is not included in schedule)(Sanctioned estimate item no. 88 of Autosig-JRM-JSG)

S.No. ItemCode


Schedule 13-NS-(Schedule-III)-Non SOR Items (Supply of Telecom materials) 1358014.00

1


Below/Par

Description:- Supply of Fibre Distribution Management system (24 Fibre) suitable mounting holes along withnuts & bolt &locking arrangement shall be provided for mounting on a standard 19" rack with SC adoptars withstandardaccessories conforming to RDSO Spec. No. RDSO/SPN/TC-037-2000 or latest. Inspection byrepresentative of CSTE/Project/BSP.

2


Below/Par

Description:- Supply of Mini-Optical Time Domain Reflectometer (Type-II) as per latest TEC specification no.G/OTD/02-02 April 2005 (with latest amendment). Make: Yokogawa/Acterna. Inspection by Rep. of RailwayEngineer.

3


Below/Par

Description:- Supply of 40 mm dia permanently lubricated HDPE telecom: ducts (with chord) as per RDSOSPEC. No. RDSO/SPN/TC/ 15/2013 Rev. 2.0 with latest amendments or Latest in length of 1000 mtrs/roll for eachkm. of HDPE duct following item are to be supplied (a) end plugs- 2 nos. (b) cable sealing plugs -2 nos (c) plasticcouplers slip fit /push fit type - 2 nos. (d) end caps to be provided along with drum- 2 nos. Colors advised for pipeis 50% bright Orange & 50% bright Green. The following materials are to be supplied with every lot of 10km (i)Rotary duct cutter - 1no. (ii) C spanner - 1no. (iii) Chamfering tool - 1no. Inspection by RITES.


of 27 Run Date/Time: 20/08/2022 13:39:53



Schedule 14-NS-(Schedule-IV)-Non SOR Items (Supply of Electrical materials) 268875.40

1


Below/Par

Description:- Supply of suitable size juntion box made of CRCA sheet fitted with 200 Amps rewirable kit kat fusegrip, locking arrangemnent with bracket for pole mounting as per details described under item No. 1 of Schedule-A of scope of work.

2


Below/Par

Description:- Supply of MS distribution box of size 200 x 200 x 120 mm with 2 Nos suitable size aluminiumbusbar arrangement of 100 Amps capacity with locking arrangement.as per details described under item No. 2 ofSchedule-A of scope of work.

3


Below/Par

Description:- Supply of 18 SWG MS cubicals of 300x300x250mm size with highlam sheet 6mm thick of suitablesize along with 3 Nos. 32 Amps Kit-kat porcelain fuse grips as per details described under item No. 3 ofSchedule-A of scope of work.

44 2.00 Numbers 1006.00 2012.00 AT Par 2012.00

Above/Below/Par

Description:- Supply of 1phase DB, single door with 40 Amp DP isolator, busbar, earth bar & neutral link for 6way, SPMCB 10/16 Amp. as per details described under item No. 4 of Schedule-A of scope of work.

55 2.00 Numbers 49350.00 98700.00 AT Par 98700.00

Above/Below/Par

Description:- Supply of RDSO/CORE approved Automatic Change Over CLS panel 60 Amps, 10 KVA as perdetails described under item No. 5 of Schedule-A of scope of work.

66 6.00 Numbers 488.00 2928.00 AT Par 2928.00

Above/Below/Par

Description:- Supply of DP MCB 32A with steel sheet enclosure as per details described under item No. 6 ofSchedule-A of scope of work.

77 10.00 Numbers 218.00 2180.00 AT Par 2180.00

Above/Below/Par

Description:- Supply of Electronic Fan Regulator modular type 100 W as per details described under item No. 7of Schedule-A of scope of work.

88 10.00 Numbers 1406.00 14060.00 AT Par 14060.00

Above/Below/Par

Description:- Supply of energy efficient Ceiling fan of 1200 mm sweep with electronic regulator as per detailsdescribed under item No. 8 of Schedule-A of scope of work.

99 20.00 Numbers 1450.00 29000.00 AT Par 29000.00

Above/Below/Par

Description:- Supply of exhaust fan 300 mm sweep along with all accessaries as per details described underitem No. 8 of Schedule-A of scope of work.

1010 10.00 Numbers 154.00 1540.00 AT Par 1540.00

Above/Below/Par

Description:- Supply of modular socket outlet with switch of 5 pin, 6 Amp capacity, 230 volt with all accessoriesas per details described under item No. 10 of Schedule-A of scope of work.

1111 8.00 Numbers 194.00 1552.00 AT Par 1552.00

Above/Below/Par

Description:- Supply of modular socket outlet with switch of 5 pin, 16/6 Amp capacity, 230 volt with allaccessories as per details described under item No. 11 of Schedule-A of scope of work.

1212 25.00 Numbers 38.00 950.00 AT Par 950.00

Above/Below/Par

Description:- Supply of Angular batten holder as per details described under item No. 12 of Schedule-Aof scopeof work.

1313 24.00 Numbers 459.00 11016.00 AT Par 11016.00

Above/Below/Par

Description:- Supply of 80 mm dia GI pipe as per details described under item No. 13 of Schedule-A of scope ofwork.

14


Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53



Description:- Supply of Analog Timer as per details described under item No. 14 of Schedule-A of scope ofwork.

1515 6.00 Numbers 500.00 3000.00 AT Par 3000.00

Above/Below/Par

Description:- Supply of contractor 32 Amp, 250 Volts supply & coil, as per details described under item No. 15 ofSchedule-A of scope of work.

1616 20.00 Metre 25.00 500.00 AT Par 500.00

Above/Below/Par

Description:- Supply of 50mm dia PE 80 HDPE pipe as per details described under item No. 16 of Schedule-A ofscope of work.

1717 100.00 Metre 54.00 5400.00 AT Par 5400.00

Above/Below/Par

Description:- Supply of 3x2.5 sqmm coppper cable(captyre) as per details described under item No. 17 ofSchedule-A of scope of work.

1818 4.00 Numbers 1986.00 7944.00 AT Par 7944.00

Above/Below/Par

Description:- Supply of Heat shrink straight through jointing kit, 1.1 KV, 3.5 core, 70 sqmm as per detailsdescribed under item No. 18 of Schedule-A of scope of work.

1919 80.00 Metre 177.98 14238.40 AT Par 14238.40

Above/Below/Par

Description:- Supply, of LT FRLS copper wire of size 1 x 16 sq.mm as per details described under item No. 19of Schedule-A of scope of work.

2020 2.00 Numbers 477.00 954.00 AT Par 954.00

Above/Below/Par

Description:- Supply of Innovations Day Night sensor, Light sensor switch Automatic Light switch, 240 VACsupply as per details described under item No. 20 of Schedule-A of scope of work.

2121 20.00 Numbers 510.00 10200.00 AT Par 10200.00

Above/Below/Par

Description:- Supply of 20W LED 4' tube light fitting with tube and all its standard accessories. Inspection byRep. of Railway Engineer..(Ref. Tender 65-SNT-Proj-Tender-2022, Schedule 12-NS-(Schedule-H) item no 1)

22


Below/Par

Description:- Supply of 25W LED outdoor LED street light with complete fitting & all its standardaccessories,comprises of pressure die cast aluminium housing powder coated in graphite grey and toughenedglass. Inspection by Rep. of Railway Engineer.(Ref. Tender 65-SNT-Proj-Tender-2022, Schedule 12-NS-(Schedule-H) item no 6)

S.No. ItemCode


Schedule 15-NS-(Schedule-V)-Non SOR Items(Execution of Electrical work) 508632.00

11 2150.00 Metre 111.00 238650.00 AT Par 238650.00

Above/Below/Par

Description:- Excavation of cable trench, supply, laying of 150 mm dia semicircular RCC pipe along theroad/track as per details described under item No. 1 of Schedule-B of scope of work.

22 4300.00 Metre 13.00 55900.00 AT Par 55900.00

Above/Below/Par

Description:- Laying of cable in the cable trench in semicircular RCC pipe along the trench as per detailsdescribed under item No.2 of Schedule-B of scope of work.

33 110.00 Metre 20.00 2200.00 AT Par 2200.00

Above/Below/Par

Description:- Fixing of cable in open air along the wall/support as per details described under item No. 3 ofSchedule-B of scope of work.

44 10.00 Metre 261.00 2610.00 AT Par 2610.00

Above/Below/Par

Description:- Excavation of cable trench, supply, laying of 150mm dia semicircular RCC pipe,sand & refilling ofexcavated earth across the road/track as per details described under item No. 4 of Schedule-B of scope of work.

5


Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53



Description:- Laying of LT cable in the cable trench in semicircular RCC pipe across the track/road as perdetails described under item No. 5 of Schedule-B of scope of work.

6


Below/Par

Description:- Excavation of cable trench, brick throughing, sand filling & laying of two loops of cable nearsupporting structure & refilling the excavated earth as per details described under item No. 7 of Schedule-B ofscope of work.

77 40.00 Metre 317.00 12680.00 AT Par 12680.00

Above/Below/Par

Description:- Excavation of cable trench & laying of cable in cement concrete as per details described underitem No. 10 of Schedule-B of scope of work.

88 25.00 Metre 4705.00 117625.00 AT Par 117625.00

Above/Below/Par

Description:- Cable trench (Horizontle drilling) & laying of cable as per details described under item No. 11 ofSchedule-B of scope of work.

99 4.00 Numbers 176.00 704.00 AT Par 704.00

Above/Below/Par

Description:- Installation of CRCA junction box as per details described under item No. 12 of Schedule-B ofscope of work.

1010 4.00 Numbers 200.00 800.00 AT Par 800.00

Above/Below/Par

Description:- Fixing & painting of MS distribution box of 100 Amps capacity with locking arrangement as perdetails described under item No. 13 of Schedule-B of scope of work.

1111 2.00 Numbers 44.00 88.00 AT Par 88.00

Above/Below/Par

Description:- Installation & commissioning of 1&3 phase DB with all accessories as per details described underitem No. 14 of Schedule-B of scope of work.

1212 2.00 Numbers 1738.00 3476.00 AT Par 3476.00

Above/Below/Par

Description:- Installation of automatic changeover CLS panel as per details described under item No. 15 ofSchedule-B of scope of work.

1313 6.00 Numbers 37.00 222.00 AT Par 222.00

Above/Below/Par

Description:- Fixing of MCB DP, 32 Amps 240 Volts as per details described under item No. 16 of Schedule-B ofscope of work.

1414 40.00 Numbers 12.00 480.00 AT Par 480.00

Above/Below/Par

Description:- Fixing of LED light fitting as per details described under item No. 17 of Schedule-B of scope ofwork.

1515 6.00 Numbers 282.00 1692.00 AT Par 1692.00

Above/Below/Par

Description:- Wiring & fixing charges LED light fittings with shortarm fixture on street light poles as per detailsdescribed under item No. 18 of Schedule-B of scope of work.

1616 11.00 Numbers 7.00 77.00 AT Par 77.00

Above/Below/Par

Description:- Fixing Electronic fan regulator modular type 100W as per details described under item No. 19 ofSchedule-B of scope of work.

1717 20.00 Numbers 27.00 540.00 AT Par 540.00

Above/Below/Par

Description:- Fixing of exhaust fan as per details described under item No. 20 of Schedule-B of scope of work.

1818 10.00 Numbers 16.00 160.00 AT Par 160.00

Above/Below/Par

Description:- Fixing of ceiling fan as per details described under item No. 21 of Schedule-B of scope of work.

1919 18.00 Point 12.00 216.00 AT Par 216.00

Above/Below/Par

Description:- Fixing & connecting of 6 & 16/6 Amp socket & switche with 2.5 sq. mm single core FRLS copperwireas per details described under item No. 22 of Schedule-B of scope of work.

20


Below/Par

of 27 Run Date/Time: 20/08/2022 13:39:53



20Description:- Fixing of 80 mm GI pipe as per details described under item No. 23 of Schedule-B of scope ofwork.

2121 6.00 Numbers 1873.00 11238.00 AT Par 11238.00

Above/Below/Par

Description:- Earth electrode arrangement as per details described under item No. 24 of Schedule-B of scope ofwork.

2222 25.00 Numbers 17.00 425.00 AT Par 425.00

Above/Below/Par

Description:- Fixing of angular batten holder with necessary acessories as per details described under item No.25 of Schedule-B of scope of work.

2323 4.00 Numbers 200.00 800.00 AT Par 800.00

Above/Below/Par

Description:- Fixing and installation of Heat shrink straight through jointing kit, 1.1 KV, 3.5 core, 70 sqmm as perdetails described under item No. 26 of Schedule-B of scope of work.

2424 82.00 Point 456.00 37392.00 AT Par 37392.00

Above/Below/Par

Description:- Concealed wiring with PVC conduite pipe with modular switch & 1.5 sq.mm FRLS copper wire asper details described under item No. 27 of Schedule-B of scope of work.

2525 200.00 Metre 53.00 10600.00 AT Par 10600.00

Above/Below/Par

Description:- Sub circuit wiring with 2.5 sq.mm FRLS copper wire as per details described under item No. 28 ofSchedule-B of scope of work.

2626 100.00 Metre 60.00 6000.00 AT Par 6000.00

Above/Below/Par

Description:- Sub circuit wiring with 4.0 sq.mm FRLS copper wire as per details described under item No. 29 ofSchedule-B of scope of work.

2727 62.00 Numbers 11.00 682.00 AT Par 682.00

Above/Below/Par

Description:- Supply & fixing of lugs per details described under item No. 30 of Schedule-B of scope of work.Supply & fixing Aluminium lugs 70 sq.mm

2828 16.00 Numbers 19.00 304.00 AT Par 304.00

Above/Below/Par

Description:- Supply & fixing of lugs per details described under item No. 30 of Schedule-B of scope ofworkSupply & fixing Copper lugs 16 sq.mm

3. ITEM BREAKUP

No item break up added

4. ELIGIBILITY CONDITIONS

Special Technical Criteria

S.No. Description ConfirmationRequired

RemarksAllowed

DocumentsUploading

of 27 Run Date/Time: 20/08/2022 13:39:53



1

Special Technical Eligibility Criteria: (a) The tenderer must have successfully completedor substantially completed any one of the following categories of work(s) during last 07(seven) years, ending last day of month previous to the one in which tender is invited:. (i)Three similar works each costing not less than the amount equal to 30% of advertisedvalue of the tender, or (ii) Two similar works each costing not less than the amount equalto 40% of advertised value of the tender, or (iii) One similar work costing not less thanthe amount equal to 60% of advertised value of the tender. Similar work means:(i)Installation or modification of PI/RRI/EI works [OR] (ii) Intermediate BlockSignalling/Auto Block Signalling /Provision or replacement of any type of blockinstruments/LC Gate Interlocking work [OR] (iii) MACLS outdoor signalling work whichincludes one or more works like cable trenching & laying /location erection and wiring/point machine installation or replacement (including power operated siding points)/signalfoundation and erection / track circuiting /double distant /BPAC installation /Axle-counterinstallation. Note:- If the works involves alteration of EI system, the following l conditionsshall be satisfied : "Submission of "undertaking by the tenderer", that the equipment forEI shall be procured from same RDSO approved Original Manufacture of Equipment andinstallation, testing and commissioning of EI shall also be got done from the samesource"

No No Allowed(Mandatory)

Special Financial Criteria


RemarksAllowed

DocumentsUploading

1

(Advance Correction Slip No. 1) A. Para 10.2., Part I of GCC shall be read as under:10.2. Financial Eligibility Criteria: The tenderer must have minimum average annualcontractual turnover of V/N or 'V' whichever is less ;where V= Advertised value of thetender in crores of Rupees N= Number of years prescribed for completion of work forwhich bids have been invited. The average annual contractual turnover shall becalculated as an average of "total contractual payments" in the previous three financialyears, as per the audited balance sheet. However, in case balance sheet of thepenurious year is yet to be prepared/ audited, the audited balance sheet of the fourthprevious year shall be considered for calculating average annual contractual turnover.The tenderers shall submit requisite information as per Annexure-VIB, along with copiesof Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate fromChartered Accountant duly supported by Audited Balance Sheet


Submission of Document Verification Certificate


RemarksAllowed

DocumentsUploading

1

Please submit a certificate in the prescribed format (please download the format from thelink given below) for verification / confirmation of the documents submitted forcompliance of eligibility / qualifying criteria. Non submission of the certificate, orsubmission of certificate either not properly filled in, or in a format other than theprescribed format shall lead to summary rejection of your offer.( Click here to download the Format of Self Certificatio)


5. COMPLIANCE

Check Lst


RemarksAllowed

DocumentsUploading

1Credentials in support of fulfillment of eligibility criteria. (Without thesedocuments the offer is liable to be rejected.)

No No Not Allowed

2

Tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format ofcertificate to be submitted by the bidder is enclosed is as ''ANNEXURE-V''.Non-submission of above certificate by the bidder shall result in summarilyrejected of his/their bid.

No No Not Allowed

3Uploading of Declaration regarding Employment of Retired Engineer/RetiredRailway Officer as per clause no.16 of Part-I of IRSGCC. [in the formatattached in - Documents]

No No Not Allowed

of 27 Run Date/Time: 20/08/2022 13:39:53



https://ireps.gov.in/ireps/upload/resources/REVISED_FORMAT_FOR_CERTIFICATE_19072022.pdf

4

Declaration or An undertaking from the tenderer(s) as per instruction givenvide GCC Apr-2022 that he is not blacklisted or debarred by Railways or anyother Ministry / Department of Govt. of India from participation in tender on thedate of opening of bids. Concealment / wrong information in regard to aboveshall make the contract liable for determination under Clause-62 of theGeneral Conditions of Contract.

No No Not Allowed

5Details of technical personnel with qualification and experience employed bythe firm.

No No Not Allowed

6Details of supervisors and skilled and unskilled staff with qualifications andexperience for field supervision and execution.

No No Not Allowed

7Details of special equipments, tools and plants and machinery, vehicle etc.available with the firm for execution of contract works.

No No Not Allowed

8Bar Chart/PERT Chart with time schedule for supply of materials andexecution of works.

No No Not Allowed

9Uploading of Statement Showing the particulars of Works on Hand WorksCompleted as per the format attached to the tender document.

No No Not Allowed

10Full and clear postal address including telephone/fax numbers to besubmitted.

No No Not Allowed

11Uploading of NEFT FORM - as per the format attached with the tenderdocument.

No No Not Allowed

12

The above check list is not exhaustive. The tenderer must go through carefullythe entire booklet and submit the tender complying with allconditions/provisions/instructions mentioned therein irrespective of the factthat they have been highlighted in the checklist or not.

No No Not Allowed

Commercial-Compliance


RemarksAllowed

DocumentsUploading

1

Please enter the percentage of local content in the material being offered.Please enter 0 for fully imported items, and 100 for fully indigenous items. Thedefinition and calculation of local content shall be in accordance with the Makein India policy as incorporated in the tender conditions.

No YesAllowed(Optional)

General Instructions


RemarksAllowed

DocumentsUploading

1

General conditions, special conditions of tender/contract, Instructions totenderers, standard specifications for works and materials are laid down inIndian Railways Standard General Condition of Contract Apr-2022, IndianRailways Unified Standard Specification (Works & materials) 2010-Volume I &II (with latest amendment), "Conditions of Tender" "General Conditions ofContract" "Instructions to Tenderers" for S&T works of S.E. Railway/S.E.C.Railway all corrected up to date. Which will be binding onthetenderers/Contractors can be seen at the office of Chief Signal &TelecomEngineer (Project), S.E.C. Railway, Bilaspur.

No No Not Allowed

2E-Tender forms are not transferable and the same is to be submitted withdigital signature by the Tenderer already registered with the site.

No No Not Allowed

3 Tender with any special conditions may not be considered. No No Not Allowed

4

The submitted e-tender forms will be considered as digitally signed by thetenderer as a confirmation from the tenderer that the tenderer has read,agreed and accepted all the conditions and laid down documents, as well asSchedule of Tender, General and Special Conditions.

No No Not Allowed

5All documents uploaded or information furnished in the website should bedigitally signed by the competent authority

No No Not Allowed

6

The tender offer complete in all respect and with all documents is to besubmitted online by e-tendering process through the website www.ireps.gov.inbefore the closing time/date of this tender as mentioned in the NIT (NoticeInviting Tender). No manual offers shall be accepted.

No No Not Allowed

of 27 Run Date/Time: 20/08/2022 13:39:53



7

Tenderer must look out for NIT as soon as it is available in IREPS website andupload their offer well in advance without waiting for closing date & time, toavoid last minute hassles in their own computer system or communication line.In case of any problem with the portal is faced while filling the e-tender,Tenderers are advised to contact with the Helpdesk of IREPS portal who willrender all help and assistance related with the website and portal except thatRelated with the details of the tender. Railway will not take any responsibilityfornon-participation in the e-tender online for the reasons related to thewebsiteand portal or server etc. beyond the control of Railways.

No No Not Allowed

8

This document is the Standard Tender Document which consists of theInstruction to the Tenderers, NIT (Notice Inviting Tender), General Conditionsof the Tender, Special conditions of the tender, Tender schedules,Specifications of the works & various Annexures, drawings etc. All the abovementioned documents taken together shall constitute the complete tenderdocument hereafter referred to as "Tender Document" & have to be readtogether& acted upon accordingly. No part of the tender document can berelied upon or acted upon in isolation.

No No Not Allowed

9All details and drawings pertaining to the works as are available can be seen inthe office of Chief Signal & Telecom Engineer (Project) S.E.C. Railway,Bilaspur.

No No Not Allowed

10

The Railway may, of its own or in response to any clarificationRequested/suggested by any person including that from the tenderer,maymodify this tender document at its sole discretion at least 15 days beforethedue date of closing of the tender as corrigendum.

No No Not Allowed

11

Corrigendum as required may be issued at least 15 days prior to the closing ofthe tender. These corrigenda of this tender, if any, as issued time to time willbe available on website at least 15 days in advance of closing of tender. Thetenderers are requested to check the website before submitting their offerwhether any such corrigendum to the tender has been issued or not andrevise the offer if required accordingly failure on the part of tender on thisaspect will be solely tenderers responsibility.

No No Not Allowed

12

The Railway and the website will have no responsibility for incorrect evaluationof cost and thereby incorrect cost of work and ranking of tenderers, if theschedule is not filled incorrectly and unambiguously for each item. No claim orclarification of a tenderer regarding applicability, inclusion or exclusion of anyelement of tax or duty or any other change in the offer subsequently (afterclosing of the tender) will be entertained. For this the tenderers are advised toread the Instructions, General Conditions, Special Conditions and otherInstructions carefully before submission of tender.

No No Not Allowed

13

Railway and the IREPS website will not take the responsibility for any onlinepayment made by the tenderer and debited from his/their account towards thetender cost or Earnest Money due to wrong or mis-manipulation of the menusor any reasons related with the IT or found unsuitable for the tender etc.Railway and IREPS website will not entertain any claim in this regard or refundthe paid amount.

No No Not Allowed

14

The e-tenders will be opened online using the IREPS portal. No representativeis required to be present for opening of tender and details of rates quoted andranking of all the bidders etc shall be available to the bidders in the websiteafter the opening of the tender.

No No Not Allowed

15

In case the date of closing mentioned in the Notice Inviting Tender is declareda holiday/ bandh/ strike etc. on any account, the date of closing tender onlinewill not be changed as the application in the website of IREPS does not permitsubmission of any offer after closing date and time of the tender. However,opening of tenders online will be on any convenient day after the closingdate/time of tenders.

No No Not Allowed

16

This is a time bound project and shall be executed as per time schedule. Thetenderers are advised to survey the site at their own cost before submitting atender, the tenderer will be deemed to have satisfied himself by actualinspection of the site and locality of the works, that all conditions liable to beencountered during the execution of the works are taken into account andthatthe rates he enters in the tender forms are adequate for the completionofworks to the entire satisfaction of the Engineer.

No No Not Allowed

of 27 Run Date/Time: 20/08/2022 13:39:53



17

The cancellation of any documents such as power of attorney, partnershipdeeds etc., forthwith shall be communicated by the Contractor to the Railwayin writing, failing which the Railway shall have no responsibility or liability forany action on the strength of said documents.

No No Not Allowed

18

The Contractor will be permitted to make use of the service roads alreadyExisting in Railway possession. If additional service roads are required withinRailway premises the Contractor may be allowed to make them at his owncostwith the prior approval of the Railway's Engineer. All service roadsrequiredoutside Railway boundary shall be constructed by the Contractor athis ownrisk and cost. These roads shall be maintained by the Contractor at hisowncost. The Railway reserves the right to make use of the service roads asandwhen necessary without any payment to the Contractor.

No No Not Allowed

19All the bidders/tenderers should ensure that they are GST compliant and theirquoted tax structure/rates are as per GST Law.

No No Not Allowed

20

When the tender is received by the Railway administration, it will beunderstood that the tenderer/s has/have gone through carefully in details allthe instructions, conditions, general and special, of the contract and all generaland special instructions for execution of the work and that the tenderer/s has /have got himself/ themselves clarified on all points and doubts andInterpretations by the proper authorities of the Railway administration.

No No Not Allowed

21

After opening of the tender, any document pertaining to the constitution ofSole Proprietorship Firm / Partnership Firm / Registered Company/ RegisteredTrust / Registered Society etc. shall be neither asked nor considered, ifsubmitted.

No No Not Allowed

22The terms "Correction slip" as referred to in this tender document includes thefollowing terms also :(i)Addendum slip. (ii) Corrigendum slip. (iii) Addendumslip and Corrigendum slips which are issued in consecutive serials.

No No Not Allowed

23Indian Railway General Condition of Contract -Apr-2022 Correction Slip issuedtill opening of tender.

No No Not Allowed

24

The authority for the acceptance of the tender will rest with the Railway. Itshallnot be obligatory on the said authority to accept the lowest tender or anyothertender, and tenderer(s) shall neither demand any explanation for thecause ofrejection of his/ their tender nor the Railway to assign reasons fordeclining toconsider or reject any particular tender or tenders.

No No Not Allowed

25If there is any contradiction between schedule description and SOR then SORwill prevail.

No No Not Allowed

26

The Contractors who are working in the establishment through contract labour(Regulation and Abolition)Act1970 and Central Rule 1971 obtain a licensefrom the Assistant Labour Commissioner (central) concerned and produce thesame to the Railway either along with the tender or before signing theagreement failing which the contract awarded will be terminated on the groundthaty they have not complied with legat provision of the said act and earnestmoney forfeited.

No No Not Allowed

Undertakings


RemarksAllowed

DocumentsUploading

1I/ We have visited the works site and I / We am / are aware of the siteconditions.

No No Not Allowed

6. Documents attached with tender

S.No. Document Name Document Description

1autoscopofworkKAV-ITR-NGP4aug.pdf

New Scope of Work

2 SOR-202118.01.2021.pdf SOR SandT SECR 2021

3AUTO-ROLLOFNGPDIVLATEST-Model1.pdf

Auto Sig Roll Draigram

4GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf

GCCApril 2022

of 27 Run Date/Time: 20/08/2022 13:39:53



52022_CE-I_CT_GCC-2022Policy14.07.2022.pdf

GCC Correction slip No1

6 SCC_1.pdf SCC AND TENDER

7 GeneralInstructionofSchedules...pdf Gen instruction of Schedules

This tender complies with Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued byDepartment of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no.2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017 and amendments/ revisions thereof.

As a Tender Inviting Authority, the undersigned has ensured that the issue of this tender does not violate provisions ofGFR regarding procurement through GeM.

Signed By: HARISH KUMAR SAHU

Designation : Dy.CSTEProjectNGP

of 27 Run Date/Time: 20/08/2022 13:39:53



proj-ngp-s and t/south east central rly tender document - IREPS

Documents

Transcript of proj-ngp-s and t/south east central rly tender document - IREPS