Prof. Dr. Mahmoud Abo El-Nasr #@The most successful @@ Egyptian Minister of Education

44
H.E. Prof. Mahmoud Mohamed Mahmoud Abo El-Nasr | to discuss The Strategic Plan and Education is Egypt’s National Project http://www.alkoga.blogspot.com/ 2015/03/he-prof-mahmoud-mohamed- mahmoud-abo-el.html The most successful | Egyptian Minister of Education | Prof.D. Mahmoud Abu-ELNasr

Transcript of Prof. Dr. Mahmoud Abo El-Nasr #@The most successful @@ Egyptian Minister of Education

Egypt | Education for All 2015National Review

http://unesdoc.unesco.org/images/0022/002299/229905E.pdf

------------------------

A Conversation with Mahmoud Abo El-Nasr: Developing Egypt’s Schoolshttp://www.al-fanarmedia.org/

2015/01/conversation-mahmoud-abo-el-nasr-developing-egypts-schools

------------

Prof. Dr. Mahmoud Abo El-Nasrhttp://en.wikipedia.org/wiki/

Mahmoud_Abo_El-Nasr

Prof.D. Mahmoud Abu-ELNasr http://bit.ly/18zHCab

Future priorities of educationdiscussed in Arab Regional

Conference on Education Post-2015 inEgypt

http://www.sana.sy/en/?p=26691

----------

Together We Can will raise qualityof education in Egypt

http://www.thecairopost.com/news/123432/inside_egypt/together-we-can-

Minor Specialization :Thermodynamics, Heat Transfer, Ref.& Air Conditioning, Heat Pipes and

Heat Engines.

Present Job : Minister of Education

Qualifications

Post doctoral research for 6 months(June to December 1986) Mechanical

and Materials EngineeringDepartment, Washington State

University, Pullman, WashingtonState, U.S.A.

Ph.D. degree (Sept.1986). Channelsystem between Ain Shams Univ.,EGYPT and Engineering Department,Reading University, England, UK“Subject of research: "Gravity

Assisted Heat Pipes ".

M.Sc. Mechanical Engineering. (Sept.1981), Ain Shams University, Egypt.Subject of research: " The effect ofholes in film cooling effectiveness

and heat transfer ".

B.Sc. Mechanical Engineering (June.1975), Ain Shams University, Egypt.General grade " Very Good " and the

project grade " Distinction ".

Previous Jobs

1-From August 2006 to now:Head of the Mechanical Power

Engineering Department , Faculty ofEngineering , Ain Shams University.2-From February 2003 to July 2006 :Dean of the Faculty of Engineering,

Misr University For Science &

Technology, 6TH OF OCTOBER CITY,EGYPT.

3-From March 1999 to February 2003 :Professor of Heat Transfer, HeatEngines, thermodynamics and Ref. &Air Conditioning at Mechanical PowerEngineering Department, Faculty ofEngineering, Ain Shams Univ., CAIRO,

EGYPT.4- From December 1991 to March

1999 :Associate Professor of HeatTransfer, Heat Engines,

thermodynamics and Ref.& AirConditioning at Mechanical PowerEngineering Department, Faculty ofEngineering, Ain Shams Univ., CAIRO,

EGYPT.5- From December 1989 to December

1991 :

Assistant Professor of HeatTransfer, Heat Engines,

Thermodynamics and Ref. Airconditioning at Energy & AutomotiveDepartment, Faculty of Engineering,Ain Shams University, CAIRO, EGYPT.6- From June 1989 to December 1989 :Associate in Research at Mechanical

and Materials EngineeringDepartment, Washington State

University, U.S.A.7- From October 1986 to June 1989 :

Asst. Professor of HeatTransfer ,and Thermodynamics, atEnergy &Automotive Department,

Faculty of Engineering , Ain ShamsUniversity, CAIRO, EGYPT.

8- From December 1984 to October1986 :

Associate in Research at the

Department of Engineering,University of Reading, England, UK.9- From October 1975 to December

1984 : Teaching Asst. at Energy and

Automotive Department, Faculty ofEngineering, Ain Shams University,

CAIRO, EGYPT.

Teaching

Mechanical Power EngineeringDepartment, Faculty ofEngineering, Ain Shams

University, CAIRO, EGYPT. Engineering Department,

University of Reading, England,UK.

Mechanical and MaterialsEngineering Department,

Washington State University,Pullman, Washington State, U.S.A.

Faculty of Engineering, MisrUniversity For Science &

Technology, 6TH OF OCTOBER CITY,EGYPT.

Short courses at EGYPT, LEBIA,KUWAIT, SAUDI ARABIA, ABU DHABIand DUBAI for the following

subjects :Heat Exchangers, Pumps &

Compressors, Steam Boilers,Pipeline Design, Water Hammer,Ref. & Air Conditioning, Steam &

Gas Turbines, ICE, ThermalInsulation and Technical Report

Writing.

Research

· Seventeen international andFifteen local publications.

· Ten M.Sc. theses and nine Ph.D.theses were granted.

· Three M.Sc. theses & four Ph.D.theses are under supervision.

· Three researches project.· Six international and seven local

conferences.

Consultations

International

Engineering and TechnicalEducation Project, group of

Thermodynamics, Project No. 3137EGYPT, (THE WORLD BANK).

Production of Activated Bentonitefrom Local Ores, The Science &Technology cooperation program

project agreement No. 17 Grant No263.0016 between EGYPT and U.S.A.

(Furnace and Heat exchangerdesign).

Engineering and TechnicalEducation Project, fluid

mechanics committee, Project No.3137 EGYPT, ( THE WORLD BANK ).

Ministry of Transportation( Consultant for Rail Way

authority)

Public Companies

1- Misr Milk &Foods Company :Improving the continuous freezing

machine for Ice-Cream.

2- Medical Insurance Authority : I-Consultant of mechanical work for

Fayoum City Hospital.II-Consultant of mechanical work for

Aswan City Hospital.III- Consultant of mechanical work

for Luxor City Hospital.

3- Police College :Design and supervise the following :

I- Kitchen

II- Steam station III- Ventilation systems.

IV- Air conditioning systems.

4- El-Gomhoria Company forPharmaceutical:

I-Consultant of the steelworkpainting lines (Cairo).

II-Pumping Station ( 10th of RamadanCity ).

III- Design and supervise the firefighting system

5- Police Tressors Institute:Design and supervise the following :

I- KitchenII- Steam station

III-Ventilation systems.IV-Air conditioning systems.

V- Olympic swimming pool (piping and

mechanical work).

C-Private Companies1-Compy Egypt Company, CAIRO:

Design and test of intercooler formultistage compressor

2-Suez Garments Company, SUEZ:I-Mechanical work consultant, design

and supervise steam, condensate, compressed air, and

vacuum linesII- Design and supervise the fire

fighting system

3- Swiss Garments Company, 10th ofRamadan:

I- Mechanical work consultant,design and supervise steam,

condensate, compressed air, and

vacuum lines.II- Design and supervise the fire

fighting system

4-Egyptian & Spanish GarmentsCompany, 10th of Ramadan:

I- Mechanical work consultants,design and supervise steam,

condensate, compressed air, andvacuum lines.

II- Design and supervise the firefighting system

5- Egyptian & Italian GarmentsCompany, 10th of Ramadan :

I-Mechanical work consultant, designand supervise steam, condensate,compressed air, and vacuum lines.II Design and supervise the fire

fighting system

6- Port- Said Garments Company ,Port- Said :

I-Mechanical work consultant, designand supervise steam, Condensate,compressed air, and vacuum lines.II-Design and supervise the fire

fighting system

7- International Natural Foods( CRISPY ) GIZA:

I-Design of heat exchanger forpotatoes bleaching process.

II- Design and supervise the firefighting system

8- The International Co. forAgricultural Development (FARM

FRITES) 10th of Ramadan:

I- Energy conservation to thefactory.

II- Design and supervise steam,condensate, compressed air, and

vacuum linesIII- Design and supervise the fire

fighting system

9- AL-HANA Co., GIZA:Supervise five projects & six

factories: (Plastic Pipes Factory, Egg TablePlant, Milk Products, Fertilizer,

Steel Products, Ice Factoryetc....), including design,erection, commissioning and

training.

10-Egyptian Contracting and TradingCo., Cairo:

Consultant of mechanical work for:Waste Water Pumping Station, U.S.AID(El-Gezira No.8 Beni Suef City).

Waste Water Pumping Station, U.S.AID(El-Salakhana No.3 Fayoum City).Ductile Cast Iron Pressure Pipe

Line, U.S.AID ( El-Gezira Beni SuefCity).

11- ESSO Standard (N.E.) INC. CAIRO,EGYPT:

Consultant of mechanical work forthe new VII tank, L.O.B.P.,

Mostorod, CAIRO, 1994.

12- The Scientific Office ForComputer Aided Design & EngineeringConsultations: 8 Projects (1993 to

1998). I-Consultant of HVAC for many

projectsII- Design and supervise the fire

fighting system

13- National Company for PackagingIndustries (NATPACK)

CAIRO, EGYPT (1998-1999) :Design and supervise the following :

I- Ventilation systemsII- Air conditioning systems.III- Cooling water systems.IV- Compressed air systems.

14- Egyptian British Bank :Design and supervise the airconditioning systems (HVAC)of the following branches:

I-Hurghada (1998).II-Borg El-Arab (1999).

III-Design and supervise the firefighting system

15- Banqe du CAIREDesign and supervise the air

conditioning systems (HVAC) andDesign and supervise the fire

fighting system ofthe following branches:I - Zagazig (1998).

II- EL-Senblawain (1999).III-Al-Azhar (2000).

16- Water Heating of OlympicSwimming Pools for the Following

Clubs:I-EL-Ghaba Club (Cairo), 1998.

II-El-Rowad Club (10Th of Ramadan),1999.

III-Cairo Sporting Club (Cairo),

2000.IV-El shams Sporting Club(Cairo),

2000.V- Hliolido Sporting Club(Cairo),

2004

17- Al-Ahram Beverage Company:Mechanical work consultant, design

and supervise steam,condensate, compressed air, andvacuum lines, for the following

sites:I-Giza & Sharkia factories, 1998.

II-Al-Obour factory, 2000.

18- Al-Baron hotels:Design and supervise the airconditioning systems (HVAC)of the following branches:

I-Heliopolis (new extension), 2000.

II-Sharm El-Sheakh (new extension),2000.

19- Tiba Mall Car Park (Nasr City)Cairo, (1998):

Design and supervise the firefighting system.

20-ILQUATRO Knit Wear, (2000):Design and supervise the following :

I- Ventilation systems.II- Air conditioning systems

III- Design and supervise the firefighting system.

21- Citadel Garments Factory,(2000):

I- Mechanical work consultant,design and supervise steam,

Condensate, Compressed air, andvacuum lines.

II- Design and supervise the firefighting system.

22- Lotus Garments Co., (2000):Mechanical work consultant, designand supervise steam, Condensate,Compressed air, and vacuum lines.

23-Eastern Company, (1997- 2007):Consultant of mechanical work,

automation, sorting, fire fightingSystems and Compressed air of the

following branches:I- GIZA

II- 6th of October

24-East Company for Electrical andMechanical Industries, (2001-2005):

Mechanical work consultant, designand supervise steam boilers.

25- El-madina El-minaoura GarmentsCo., (2004):

I- Mechanical work consultant,design and supervise steam,

Condensate,and Compressed air.II- Design and supervise the fire

fighting system.

26- Lotus Garments Co., (2000):I- Mechanical work consultant,design and supervise steam and

Condensate lines.II-Design and supervise the fire

fighting system.

27- AIN SAMS Hospitals, ( 2005-2006)I- Air conditioning systems

II-Design and supervise the firefighting system.

III- Design and supervise themedical gases.

28- ISIS Travel, ( 1998- 2005 )I- Air conditioning systems

II-Design and supervise the firefighting system.

29- EGAT group, ( 2006-2007 )Testing new fan coils ( HVAC ).

Membership of Societies

The American Society ofMechanical Engineers (ASME),

No.2072684 (Member). The Egyptian Society of

Mechanical Engineers (ESME ) . The Egyptian Society of

Refrigeration.

List of Publications

1. M. Abo El-Nasr and A. El-Ehwany,"Film Cooling Performance by

Injection Through discrete Holes".Fifth International Symposium on AirBreathing Engines, Bangolar, INDIA (

1981 ).

2. M. Abo El-Nasr and M. Negm"Performance Limits of Heat Pipeswith Helical Wick Structure". CAIROInternational Symposium on RenewableEnergy Sources, CAIRO, EGYPT, 13-16

June (1988).

3. M. Abo El-Nasr and S.M. ElHaggar, "Thermal Characteristics of

the Heat Pipes Used in EnergyConversion Systems". World RenewableEnergy Congress. READING, ENGLAND,

23-28, September ( 1990 ).

4. M. Abo El-Nasr and S.M. El

Haggar, "An Investigation of aWickless Heat Pipe Solar Collector

". CAIRO, 2nd InternationalSymposium on Renewable Energy

Sources, CAIRO, EGYPT, 1-4 October (1990 ).

5. M. Abo El-Nasr "Investigationinto the Performance of a

Thermosyphon with a Localized HeatInput". The Bulletin of the Facultyof Engineering, Helwan University,CAIRO, EGYPT, February ( 1991 ).

6. M. Abo El-Nasr "A Boundary LayerApproximation Model for CylindricalHeat Pipe". The Bulletin of theFaculty of Engineering, Ain ShamsUniversity, CAIRO, EGYPT, Vol. 26,

March ( 1991 ).

7. M. Abo El-Nasr and M. Nosir "ThePerformance of Two Phase Closed

Thermosyphon Heat Exchanger", TheBulletin of the Faculty of

Engineering, Ain Shams University,CAIRO, EGYPT, Vol. 26, March (1991).

8. M. Abo El-Nasr, M. Negm and R.Ahmed, "Effect of Gas Filled BufferVolume on the Performance of HeatPipes". The Bulletin of the Facultyof Engineering, Helwan University,

CAIRO, EGYPT, April ( 1991 ).

9. M. Abo El-Nasr "The Effect of theDynamic Behaviors the Working Fluid

on the Performance of theThermosyphon ". The Bulletin of the

Faculty of Engineering, HelwanUniversity, CAIRO, EGYPT, January

(1993).

10. M. Abo El-Nasr, C.T. Crowe, A.

El-Ehwany and R.Abd El-Aziz,"Performance Limits of a Porous

Wick- Heat Pipe". The EightInternational Conference forMechanical Power Engineering,

ALEXANDRIA University, Faculty ofEngineering, ALEXANDRIA, EGYPT,

Volume 3, Heat and Mass Transfer &Energy System, 27-29 April ( 1993 ).

11. M. Abo El-Nasr and S.M. ElHaggar, "Performance of a WicklessHeat Pipe Solar Collector ". EnergySources, Volume 15, pp. 513-522

(1993).

12. A. El-Sibaie, M. Abo El-Nasr,J.D. Burton and A. Ghorap, "Starting

Torque Reduction of Wind DrivenReciprocating Lift Pumps" CAIRO

Fourth International Conference onEnergy, Development and Environment,

CAIRO, EGYPT, Volume 2, 24-27,

October (1994 ).

13. R. Abd El-Aziz, M. Abo El-Nasr,A. El-Ehwany and C.T. Crowe, "TheInfluence of the Tilt Angle on thePerformance of Heat Pipe with PorousWick". CAIRO Fourth InternationalConference on Energy, Developmentand Environment, CAIRO, EGYPT,Volume 2, 24-27 October (1994).

14. A. El-Sibaie, M. Abo El-Nasr,J.D. Burton and A. Ghorap, "Hydro-

Dynamic Seals for Wind-DrivenReciprocating Lift Pumps". CAIROFourth International Conference onEnergy, Development and Environment,

CAIRO, EGYPT, Volume 2, 24-27,October ( 1994 ).

15. A. Serag, M.I. Negm, M. Abo El-Nasr, S.M. Abdel-Ghany and R.W.Crain "Extraction of Thermal

Underground Energy by Using aWickless Heat Pipe" The Bulletin ofthe Faculty of Engineering, Ain

Shams University, CAIRO, EGYPT, Vol.41, December (1994).

16. M. Abo El-Nasr, G. W. Younan andM.I.M Negm , “Entrainment Limit ofGravity-Assisted Heat pipes With

Helical Wicks”. The Bulletin of theFaculty of Engineering, Helwan

University , CAIRO , EGYPT, March(1995) .

17. M. Abo El-Nasr , and S.M. El-Haggar, “ Effective Thermal

Conductivity of Heat Pipes”. TheBulletin of the Faculty of

Engineering , Ain Shams University,CAIRO, EGYPT, vol.26, March (1996).

18. A. El-Ehwany , G. Rice , M. AboEl-Nasr and G. Hennes , “Thermal

Calculations of a Stirling EngineWith Internally Finned Tubes HeatExchangers’. The Bulletin of theFaculty of Engineering, Ain ShamsUniversity, CAIRO, EGYPT, vol.

31,No. 4, December (1996).

19. M. Abo El-Nasr and S. M. El-Haggar, “Effective Thermal

Conductivity of Heat Pipes “Heat andMass Journal , pp97-101 , Springier

- Verlag (1996).

20. A. El-Ehwany, M. Marwan , M. AboEl-Nasr and M. Saadawy , “

Performance Investigation of LiquidMetal Two-Phase Closed Thermosyphon

(LMTH)”. International ThermalEnergy & Environment Congress,

Marrakesh, Morocco, 9-12 June (1997).

21. M. Abo El-Nasr , G.W. Younan andM.I.M Negem “Effect of PercentageLiquid Fill on Entertainment Limitof Heat Pipes with Helical Wicks”.The Bulletin of the Faculty of

Engineering , Helwan University ,CAIRO , EGYPT , June (1997).

22. M. Abo El-Nasr , “ OptimumEffectiveness of Heat Pipe HeatExchanger”. The Bulletin of the

Faculty Of Engineering , Ain ShamsUniversity, CAIRO, EGYPT, vol.32 ,

No. 2, June (1997).

23. M. Abo El-Nasr , M. Saker , R.Abd El-Aziz and A. Ghorap,

“Experimental Investigation of thePerformance of a Heat Pipe HeatExchanger Aided with Evaporative

Cooler”. Al-Azhar Engineering FifthInternational Conference, Cairo,

Egypt, 19-22 December (1997).

24. M. Abo El-Nasr, " Effect of HeatPipe Geometry on its Thermal

Performance" The Bulletin of theFaculty of Engineering , Ain ShamsUniversity, CAIRO, EGYPT, vol. 33,

No. 3, September (1998).

25. M. Abo El-Nasr, O. A. Montasser,M.K.Mahmoud and K.M. Shokry,

" Thermal and Mechanical Propertiesof Composite Materials "

International Conference on AdvancedComposites, Hurghada,

Egypt, 15-18 December (1998).

26. M. Abo El-Nasr, " Enhancement ofBoiling Heat Transfer from

Isothermal Surfaces Covered withWire Mesh Layers". The Bulletin ofthe Faculty Of Engineering , Ain

Shams University , CAIRO, EGYPT,Vol.

34, No. 1, March (1999).

27. M. Abo El-Nasr, G.W. Younan andRichard J.M. Messiha, “CondensationHeat Transfer Inside an Inclined

Two-Phase Closed Thermosyphon”. TheBulletin of the Faculty of

Engineering , Ain Shams University,CAIRO, EGYPT, vol. 34, No. 1, March

(1999).

28. H.Z. Abou-Ziyan, A.Helali,M.Fatouh and M.M. Abo El-Nasr,“Performance of Stationary and

Vibrated Thermosyphon Working withWater and R134a”. 11th International

Mechanical Power EngineeringConference, Cairo, EGYPT, 5-7 Feb.

(2000).

29. A.A. El-Ehwany, M. Abo El-Nasrand Kamal G.Hamed, “Study of the

Film Cooling Characteristics of Hot

Plates Under Variable PressureGradient.” The Bulletin of the

Faculty of Engineering , Ain ShamsUniversity, CAIRO, EGYPT, vol. 35,

No.1, March (2000).

30. R.M.Abd El-Aziz, M.H.Sakr,R.I.El-Ghnam and M.Abo El-Nasr, “AnExperimental Investigation of the

Entrainment and Flooding from a WireMesh Capillary Structure.” The

Bulletin of the Faculty ofEngineering , Ain Shams University,

CAIRO, EGYPT, vol. 36, No.3,September (2001).

31- H.Z. Abou-Ziyan, A.Helali,M.Fatouh and M.M. Abo El-Nasr,“Performance of Stationary and

Vibrated Thermosyphon Working withWater and R134a”. Applied ThermalEngineering, vol.21, pp.813-830,

Pergamon (2001).

32- A.A. El-Ehwany, M. Abo El-Nasrand Kamal G.Hamed, “Theoretical

Analysis of the Rotating Heat Pipe,Performance and Limits.” TheBulletin of the Faculty of

Engineering , Ain Shams University,CAIRO, EGYPT, vol. 37, No.1, March

(2002).

33- M. Abo El-Nasr, KamalG.Hamed,and A. El-Ehwany

“InvestigationOf the Factors Affecting the

Rotating Heat Pipe, Performance.”The

Bulletin of the Faculty ofEngineering , Ain Shams University,CAIRO, EGYPT, vol. 39, No.1, March

(2004).

34- M. Abo El-Nasr, A. A.E. Ghorapand Saad Awad “Theoretical &

Experimental Analysis of RecuperatorHeat Pipe Heat Exchanger,

Design & Performance.” The Bulletinof the Faculty of Engineering,

Ain Shams University, CAIRO, EGYPT,vol. 39, No.1, March

(2004).

35. M. S. Saadawy, M. Abo El-Nasrand M.Abd El-Aziz " Investigation of

Boiling Heat TransferCharacteristics of Double-Tube

Thermosyphon." 13 th InternationalHeat Pipe Conference, Shanghai,China, 21-25 September (2004).

36. A. S. Gad Elmawla, M. Abo El-Nasr, and A. E. Kotb “Enhancement of

Heat Transfer in Fluidized BedCombustor Using Heat Pipe HeatExchanger.” The Bulletin of theFaculty of Engineering, Ain ShamsUniversity, CAIRO, EGYPT, vol. 40,

No.1, March 31, (2005).

37. M. Abo El-Nasr, G. Younan and M.Esmail “Performance Enhancement ofHeat Pipes with Binary Working

Fluids." The Bulletin of the Facultyof Engineering, Ain Shams

University, CAIRO, EGYPT, vol. 42,No.2, June 30, (2007).

38- T. Refay, M. Abo El-Nasr and M.Abidou "Mathematical Study about

Grashof Number Effect on theVelocity Profiles under Mixed Freeand Forced Convection in VerticalTubes" The Bulletin of the Faculty

of Engineering, Ain ShamsUniversity, CAIRO, EGYPT, vol. 43,

Part III No.1, March, (2008).

39- T. Refay, M. Abo El-Nasr and M.Abidou " Combined Effect of Grashof,Reynolds and Prandtl Numbers on the

Velocity Profiles for Laminar Flowin Vertical Tubes" Journal of Al

Azhar University Engineering Sector(JAUES), , CAIRO, EGYPT, Vol. 3, No

7, pp 387-404, April, (2008).

40- A.A. EL Desoky, Y. M. Ibrahim,M. M. Abo El-Nasr and M. A. El

Shehawy " Assessment of the NuclearPower Plants and other ElectricityPower Plants Impact on Climate

Change" 3rd INTERNATIONAL SYMPOSIUMON ENVIRONMENT, Athens, Greece, 22-

25 May(2008).

To be Published

Theoretical and ExperimentalInvestigation of Micro Heat Pipes

for Specified Application. New Techniques for Fire Fighting

Systems.

--------------