PRODUCT CATALOG - Unilog
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of PRODUCT CATALOG - Unilog
Split System Air ConditionersRSG R-410A 16 SEER 2RSC R-410A 12 SEER 3RCE R-22 14 SEER 4RCC R-22 12 SEER 5RCB R-22 10 SEER 6CKL Commercial 7VCC Distinctions™ 12 SEER 8VCA Distinctions™ 10 SEER 9
Quietfl ex® – Flex Duct“Rip-Stop” Silver Jacket 47UV-Inhibited Black Jacket 48Mobile Home-Approved 49Uninsulated Flex Duct 50
Split System Heat PumpsRTG R-410A 16 SEER 10RTC R-410A 12 SEER 11RHF R-22 14 SEER 12RHE R-22 12 SEER 13RHA R-22 10 SEER 14CPLE Commercial 15VHC Distinctions™ 12 SEER 16VHA Distinctions™ 10 SEER 17
Gas FurnacesFeaturing Million-Air™ and SureStart 18AMV9/ACV9 96% AFUE 19AMS9/ACS9 93% AFUE 20AMV8 80% AFUE 21AMS8/ADS8 80% AFUE 22DMS9/DCS9 Distinctions™ 93% AFUE 23DMS8/DDS8 Distinctions™ 80% AFUE 24DHS8 Distinctions™ 80% AFUE 25
Packaged Air ConditionersPCC 12 SEER 26PCA 10 SEER 27PCK Commercial 28PCC Commercial 29
Air HandlersAEPT 42MBE/MBR 43ARPT 44ARUF 45AR Commercial 46
AccessoriesSplit System Air Conditioning Accessories 58Split System Heat Pump Accessories 58Gas Furnace Accessories 58Packaged Air Conditioning Accessories 59Packaged Heat Pump Accessories 59Electric Heat Kits 60Packaged Gas and Electric Accessories 60Indoor Coil Accessories 60Commercial Packaged Unit Accessories 60Commercial Packaged Unit Accessories—2 to 5 Ton 61Commercial Packaged Unit Accessories—7½ to 15 Ton 61Air Handler Accessories 62Amana™ Brand Thermostats 63
CoilsCAUF Uncased Upfl ow/Downfl ow Indoor Coil 38CAPF Cased Upfl ow/Downfl ow Indoor Coil 39CHPF Cased Horizontal “A” Coil 40Horizontal Slab Coils 41
Packaged Gas/ElectricPGD 13 SEER/80% AFUE 33APG12 12 SEER/80% AFUE 34APG10 10 SEER/80% AFUE 35GPG Commercial—3 to 5 Ton 36PGC Commercial 37
Packaged Heat PumpsPHD 13 SEER 30PHB 11 SEER 31PHK Commercial 32
Contents
Indoor Air QualityAHEPA/ADMHEPA Whole-House HEPA Air Cleaners 51ASAS High-Effi ciency Electronic Air Cleaner 52A1EAC Charged-Media Electronic Air Cleaner 53AMU High-Effi ciency Media Air Cleaner 54HUM Bypass and Fan-Powered Humidifi er 55HRV/ERV Heat/Energy Recovery Ventilator 56UVX Ultraviolet Air and Object Purifi er 57
Split
Sys
tem
Air
Con
ditio
ners
2
The Amana® brand Ultron® RSG 16 SEER Air Conditioner uses the environmentally friendly refrigerant R-410A and features energy effi ciencies and operating sound levels that are among the best in the heating and cooling industry. R-410A is chlorine-free to help prevent damage to the ozone layer. The RSG features a new technology—the 2-stage, high-effi ciency Copeland® scroll compressor—that better matches the cooling requirements of the conditioned space, providing improved temperature and humidity control. The RSG is designed for the consumer who desires the ultimate in comfort, quiet and environmentally friendly performance.
RSG Ultron® Air Conditioner —16 SEER
• Uses R-410A environmentally friendly refrigerant• 2-stage, high-effi ciency Copeland scroll compressor• Refrigerant system protected by high- and low-pressure switches• Anti-short cycle protection• High-density foam compressor sound blanket• 2-speed fan motor and heavy-gauge, coated wire condenser fan grille result
in low fan operating sound• Tightly spaced, heavy-gauge, coated wire grille protects the coil from
inadvertent damage, vandalism and inclement weather, while allowing excellent access for cleaning
• Factory-installed fi lter drier keeps moisture and dirt out of the system for a long and reliable system life
• Service valves with sweat connections and gauge ports provide years of reliable, leak-free use
• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Compact footprint• Top and side compressor and tubing access• Internal pre-wired control box with single-panel access speeds installation• Service ports and controls are accessible while unit is operating• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI (Air Conditioning &
Refrigeration Institute) Unitary Air Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
Voltage-Phase
Maximum Overcurrent
Device (amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
RSG36C2C 32,000 208/230-1 35 35⅝” x 35⅝” x 36” 3/8” 3/4” 284
RSG48C2C 46,000 208/230-1 45 35⅝” x 35⅝” x 36” 3/8” 7/8” 284
RSG60C2C 56,000 208/230-1 45 35⅝” x 35⅝” x 36” 3/8” 7/8” 284
LIMITED WARRANTY• Lifetime Replacement of Entire
Unit if Compressor Fails• 10-Year—Parts
Split System Air C
onditioners
3
RSC Ultron® Air Conditioner—12 SEER
The Amana® brand Ultron® RSC 12 SEER Air Conditioner uses the environmentally friendly refrigerant R-410A and features operating sound levels that are among the best in the heating and cooling industry. R-410A is chlorine-free to help prevent damage to the ozone layer. With its 12 SEER rating, you will have lower power bills throughout the life of the system.
• Uses R-410A environmentally friendly refrigerant• High-effi ciency Copeland® scroll compressor• Refrigerant system protected by high- and low-pressure switches• Anti-short cycle protection• High-density foam compressor sound blanket• Low-operating sound fan system, including a heavy-gauge, coated wire
condenser fan grille• Tightly spaced, heavy-gauge, coated wire grille protects the coil from
inadvertent damage, vandalism and inclement weather, while allowing excellent access for cleaning
• Factory-installed fi lter drier keeps moisture and dirt out of the system for long and reliable system life
• Service valves with sweat connections and gauge ports provide years of reliable, leak-free use
• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Compact footprint• Top and side compressor and tubing access• Internal pre-wired control box with single-panel access speeds installation• Service ports and controls are accessible while unit is operating• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
Voltage-Phase
Maximum Overcurrent
Device (amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
RSC24C2D 23,000 208/230-1 25 22½” x 22½” x 29” 3/8” 3/4” 154
RSC30C2D 29,400 208/230-1 30 22½” x 22½” x 31” 3/8” 3/4” 174
RSC36C2D 35,000 208/230-1 35 29½” x 29½” x 28” 3/8” 3/4” 191
RSC42C2D 41,000 208/230-1 40 29½” x 29½” x 29” 3/8” 7/8” 203
RSC48C2D 46,000 208/230-1 45 29½” x 29½” x 29” 3/8” 7/8” 224
RSC60C2D 57,500 208/230-1 60 29½” x 29½” x 38” 3/8” 7/8” 275
LIMITED WARRANTY• 10-Year—Compressor• 10-Year—Parts
Split
Sys
tem
Air
Con
ditio
ners
4
RCE Prestige™ Air Conditioner—14 SEER
The Amana® brand Prestige™ RCE 14 SEER Air Conditioner features energy effi ciencies and operating sound levels that are among the best in the heating and cooling industry. With its 14 SEER rating—and up to 15 SEER with properly matched Amana® brand components—you will have lower power bills throughout the life of the system. Other features include a high-effi ciency compressor with overload protection and sound blanket for extra-quiet operation.
• High-effi ciency Copeland® scroll compressor• Refrigerant system protected by a loss-of-charge switch• Anti-short cycle protection• High-density foam compressor sound blanket• Low-operating sound fan system, including a heavy-gauge, coated wire
condenser fan grille• Tightly spaced, heavy-gauge, coated wire grille protects the coil from
inadvertent damage, vandalism and inclement weather, while allowing excellent access for cleaning
• Factory-installed fi lter drier keeps moisture and dirt out of the system for a long and reliable system life
• Service valves with sweat connections and gauge ports provide years of reliable, leak-free use
• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Compact footprint• Top and side compressor and tubing access• Internal pre-wired control box with single-panel access speeds installation• Service ports and controls are accessible while unit is operating• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
Voltage-Phase
Maximum Overcurrent
Device (amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
RCE24C2C 24,000 208/230-1 25 29½” x 29½” x 38” 3/8” 3/4” 175
RCE30C2C 30,000 208/230-1 25 29½” x 29½” x 38” 3/8” 3/4” 175
RCE36C2C 36,000 208/230-1 30 35⅝” x 35⅝” x 38” 3/8” 7/8” 230
RCE42C2C 42,000 208/230-1 35 35⅝” x 35⅝” x 38” 3/8” 7/8” 230
RCE48C2C 48,000 208/230-1 40 35⅝” x 35⅝” x 38” 3/8” 7/8” 235
RCE60C2C 60,000 208/230-1 55 35⅝” x 35⅝” x 42” 3/8” 1⅛” 260
LIMITED WARRANTY• Lifetime—Compressor• 10-Year—Parts
Split System Air C
onditioners
5
RCC Prestige™ Air Conditioner—12 SEER
The Amana® brand Prestige™ RCC 12 SEER Air Conditioner features energy effi ciencies and operating sound levels that are among the best in the heating and cooling industry. With its 12 SEER rating—and up to 13 SEER with properly matched Amana® brand components—you will have lower power bills throughout the life of the system. Other features include a high-effi ciency compressor with overload protection and sound blanket for extra-quiet operation.
• High-effi ciency Copeland® scroll compressor• Refrigerant system protected by a loss-of-charge switch• High-density foam compressor sound blanket• Low-operating sound fan system, including a heavy-gauge, coated wire
condenser fan grille• Tightly spaced, heavy-gauge, coated wire grille protects the coil from
inadvertent damage, vandalism and inclement weather, while allowing excellent access for cleaning
• Factory-installed fi lter drier keeps moisture and dirt out of the system for a long and reliable system life
• Service valves with sweat connections and gauge ports provide years of reliable, leak-free use
• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Compact footprint• Top and side compressor and tubing access• Internal pre-wired control box with single-panel access speeds installation• Service ports and controls are accessible while unit is operating• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
LIMITED WARRANTY• 10-Year—Compressor• 10-Year—Parts
Model
Nominal Cooling
Capacity (BTUH)
Voltage-Phase
Maximum Overcurrent
Device (amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
RCC18C2C 19,000 208/230-1 20 22½” x 22½” x 25” 3/8” 3/4” 150
RCC24C2C 24,000 208/230-1 25 22½” x 22½” x 29” 3/8” 3/4” 175
RCC30C2C 27,600 208/230-1 25 22½” x 22½” x 31” 3/8” 3/4” 185
RCC36C2C 36,000 208/230-1 30 29½” x 29½” x 30” 3/8” 7/8” 198
RCC42C2C 40,000 208/230-1 40 29½” x 29½” x 29” 3/8” 7/8” 205
RCC48C2C 45,000 208/230-1 40 29½” x 29½” x 29” 3/8” 7/8” 210
RCC60C2C 60,000 208/230-1 50 29½” x 29½” x 38” 3/8” 1⅛” 235
Split
Sys
tem
Air
Con
ditio
ners
6
RCB Prestige™ Air Conditioner—10 SEER
The Amana® brand Prestige™ RCB 10 SEER Air Conditioner features operating sound levels that are among the best in the heating and cooling industry. With its 10 SEER rating, you will have lower power bills throughout the life of the system. Other features include an energy-effi cient compressor with overload protection and sound blanket for extra-quiet operation.
• Energy-effi cient compressor features internal overload protection and internal pressure relief
• High-density foam compressor sound blanket• Low-operating sound fan system, including a heavy-gauge, coated wire
condenser fan grille• Tightly spaced, heavy-gauge, coated wire grille protects the coil from
inadvertent damage, vandalism and inclement weather, while allowing excellent access for cleaning
• Factory-installed fi lter drier keeps moisture and dirt out of the system for a long and reliable system life
• Service valves with sweat connections and gauge ports provide years of reliable, leak-free use
• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Compact footprint• Top and side compressor and tubing access• Internal pre-wired control box with single-panel access speeds installation• Service ports and controls are accessible while unit is operating• Factory-installed hard-start components (reciprocating compressor units—1½-
to 3½-ton)• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
Voltage-Phase
Maximum Overcurrent
Device (amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
RCB18C2C 18,000 208/230-1 20 22½” x 22½” x 23” 3/8” 3/4” 144
RCB24C2C 24,000 208/230-1 20 22½” x 22½” x 23” 3/8” 3/4” 145
RCB30C2C 30,000 208/230-1 30 22½” x 22½” x 25” 3/8” 3/4” 157
RCB36C2C 36,000 208/230-1 35 22½” x 22½” x 29” 3/8” 3/4” 176
RCB42C2C 42,000 208/230-1 40 22½” x 22½” x 31” 3/8” 7/8” 179
RCB48C2C 48,000 208/230-1 40 29½” x 29½” x 31” 3/8” 7/8” 183
RCB60C2C 60,000 208/230-1 60 29½” x 29½” x 29” 3/8” 1⅛” 206
LIMITED WARRANTY• 10-Year—Compressor• 5-Year—Parts
Split System Air C
onditioners
7
CKL Commercial Air Conditioner
The Amana® brand CKL Commercial Air Conditioner features an attractive louvered metal guard that protects the coil from damage and strengthens the unit. Designed for ground-level or rooftop mount, the raised base pan elevates the unit above the slab for excellent water drainage. A polyester powder-paint fi nish provides premium durability and improved UV protection.
• Energy-effi cient compressor with internal pressure relief valve• High-capacity, steel-cased liquid line fi lter drier• Totally enclosed, permanently lubricated condenser motor with a
3-bladed fan• 3- to 5-ton models are fully charged with R-22 refrigerant for 15’ of refrigerant
lines for single-phase units• 3- to 5-ton models are 10 SEER• Brass liquid and suction service valves mounted at a 45° angle with sweat
connections and service ports• High-effi ciency copper tube/aluminum fi n coil• Heavy-gauge G-90 galvanized steel cabinet with appliance-quality polyester
powder-paint fi nish with 500-hour salt-spray approval• 7½- to 10-ton models comply with ASHRAE Standard 90.1• 7½- and 10-ton models are charged with 2 lbs. of R-22 refrigerant
Model
Nominal Cooling
Capacity (BTUH)
Voltage-Phase
Maximum Overcurrent
Device(amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
CKL36-3L 35,000 208/230-3 20 23” x 23” x 26½” 3/8” 3/4” 142
CKL49-3L 47,000 208/230-3 30 29” x 29” x 29” 3/8” 7/8” 176
CKL60-3L 57,000 208/230-3 30 29” x 29” x 31½” 3/8” 7/8” 208
CKL090-3L 88,000 208/230-3 60 35” x 35” x 41½” 5/8” 1⅜” 370
CKL120-3L 114,000 208/230-3 30 35” x 35” x 41½” 5/8” 1⅜” 420
CKL090-4L 88,000 460-3 60 35” x 35” x 41½” 5/8” 1⅜” 370
CKL120-4L 114,000 460-3 35 35” x 35” x 41½” 5/8” 1⅜” 420
LIMITED WARRANTY• 5-Year—Compressor• 5-Year—Parts
Split
Sys
tem
Air
Con
ditio
ners
8
VCC Distinctions™ Air Conditioner—12 SEER
The Amana® Distinctions™ brand VCC 12 SEER Air Conditioner offers economical and dependable cooling comfort and high-effi ciency performance. The VCC has been designed with application fl exibility, convenient installation, maintenance and service in mind. Value-driven engineering, money-saving performance, reliable components and our quality manufacturing make VCC units perfect for the value-minded homeowner or cost-conscious builder. With its 12 SEER rating—a considerable increase in effi ciency over units manufactured just a few years ago—your savings in energy costs can be substantial, especially during periods of extreme hot weather, when energy use increases dramatically.
• High-effi ciency compressor features internal overload protection and internal pressure relief for high temperatures and pressures
• Large-bladed condenser fan driven by a permanently lubricated motor with vertical air discharge reduces operating sound
• Factory-installed fi lter drier keeps moisture and dirt out of the system for a long and reliable system life
• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Heavy-gauge, coated wire grille protects the coil• Compact footprint• Sweat connection, front-seating brass service valves with gauge ports allow for
convenient servicing of the unit• Top and side compressor and tubing access• Internal pre-wired control box with single-panel access speeds installation• Service ports and controls are accessible while unit is operating• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
Voltage-Phase
Maximum Overcurrent
Device(amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
VCC18C2C 18,000 208/230-1 20 22½” x 22½” x 23” 3/8” 3/4” 144
VCC24C2C 30,000 208/230-1 20 22½” x 22½” x 31” 3/8” 3/4” 154
VCC30C2C 30,000 208/230-1 25 29½” x 29½” x 25” 3/8” 3/4” 170
VCC36C2C 36,000 208/230-1 35 29½” x 29½” x 29” 3/8” 7/8” 198
VCC42C2C 42,000 208/230-1 35 29½” x 29½” x 29” 3/8” 7/8” 209
VCC48C2C 48,000 208/230-1 40 29½” x 29½” x 29” 3/8” 7/8” 215
VCC60C2C 60,000 208/230-1 50 29½” x 29½” x 36” 3/8” 1⅛” 240
LIMITED WARRANTY• 10-Year—Compressor• 10-Year—Parts
Split System Air C
onditioners
9
VCA Distinctions™ Air Conditioner—10 SEER
The Amana® Distinctions™ brand VCA 10 SEER Air Conditioner offers economical and dependable cooling comfort and high-effi ciency performance. The VCA has been designed with application fl exibility, convenient service, maintenance and installation in mind. Value-driven engineering, money-saving performance, reliable components and our quality manufacturing make VCA units perfect for the value-minded homeowner or cost-conscious builder. With its 10 SEER rating—a considerable increase in effi ciency over units manufactured just a few years ago—your savings in energy costs can be substantial, especially during periods of extreme hot weather, when energy use increases dramatically.
• Energy-effi cient compressor features internal overload protection and internal pressure relief for high temperatures and pressures
• Large-bladed condenser fan driven by a permanently lubricated motor with vertical air discharge reduces operating sound
• Factory-installed fi lter drier keeps moisture and dirt out of the system for a long and reliable system life
• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Heavy-gauge, coated wire grille protects coil• Compact footprint• Sweat connection, front-seating brass service valves with gauge ports allow for
convenient servicing of the unit• Top and side compressor and tubing access • Internal pre-wired control box with single-panel access speeds installation• Service ports and controls are accessible while unit is operating• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
Voltage-Phase
Maximum Overcurrent
Device(amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
VCA18C2C 18,000 208/230-1 20 22½” x 22½” x 23” 3/8” 3/4” 144
VCA24C2C 23,400 208/230-1 20 22½” x 22½” x 23” 3/8” 3/4” 145
VCA30C2C 28,800 208/230-1 30 22½” x 22½” x 25” 3/8” 3/4” 149
VCA36C2C 34,400 208/230-1 35 22½” x 22½” x 29” 3/8” 3/4” 172
VCA42C2C 39,000 208/230-1 40 22½” x 22½” x 31” 3/8” 7/8” 190
VCA48C2C 45,000 208/230-1 50 29½” x 29½” x 29” 3/8” 7/8” 205
VCA60C2C 60,000 208/230-1 60 29½” x 29½” x 29” 3/8” 1⅛” 200
LIMITED WARRANTY• 5-Year—Compressor• 5-Year—Parts
Split
Sys
tem
Hea
t Pum
ps
10
RTG Ultron™ Heat Pump—16 SEER
The Amana™ brand Ultron™ RTG 16 SEER Heat Pump uses the environmentally friendly refrigerant R-410A and features energy effi ciencies and operating sound levels that are among the best in the heating and cooling industry. R-410A is chlorine-free to help prevent damage to the ozone layer. The RTG features a new technology—the 2-stage, high-effi ciency Copeland® scroll compressor—that better matches the cooling requirements of the conditioned space, providing improved temperature and humidity control. The RTG is designed for the consumer who desires the ultimate in comfort, quiet and environmentally friendly performance.
• Uses R-410A environmentally friendly refrigerant• 2-stage, high-effi ciency Copeland scroll compressor• Refrigerant system protected by high- and low-pressure switches• Anti-short cycle protection• High-density foam compressor sound blanket• 2-speed fan motor and heavy-gauge, coated wire condenser fan grille result
in low fan operating sound• Tightly spaced, heavy-gauge, coated wire grille protects the coil from
inadvertent damage, vandalism and inclement weather, while allowing excellent access for cleaning
• Factory-installed, bi-fl ow liquid line fi lter drier keeps moisture and dirt out of the system for a long and reliable system life
• Service valves with sweat connections and gauge ports provide years of reliable, leak-free use
• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Compact footprint• Top and side compressor and tubing access• Internal pre-wired control box with single-panel access speeds installation• Service ports and controls are accessible while unit is operating• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
NominalHeating
Capacity(BTUH @ 47 °F)
Voltage-Phase
Maximum Overcurrent
Device (amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
RTG36C2C 35,000 34,000 208/230-1 35 35⅝” x 35⅝” x 36” 3/8” 7/8” 307
RTG48C2C 46,000 48,000 208/230-1 45 35⅝” x 35⅝” x 36” 3/8” 7/8” 307
RTG60C2C 56,500 56,000 208/230-1 45 35⅝” x 35⅝” x 36” 3/8” 7/8” 309
LIMITED WARRANTY• Lifetime Replacement of Entire
Unit if Compressor Fails• 10-Year—Parts
Split System H
eat Pumps
11
RTC Ultron™ Heat Pump—12 SEER
The Amana™ brand Ultron™ RTC 12 SEER Heat Pump uses the environmentally friendly refrigerantR-410A and features operating sound levels that are among the best in the heating and cooling industry. R-410A is chlorine-free to help prevent damage to the ozone layer. With its 12 SEER rating, you will have lower power bills throughout the life of the system.
• Uses R-410A environmentally friendly refrigerant• High-effi ciency Copeland® scroll compressor• Refrigerant system protected by high- and low-pressure switches• Anti-short cycle protection• High-density foam compressor sound blanket• Low-operating sound fan system, including a heavy-gauge, coated wire
condenser fan grille• Tightly spaced, heavy-gauge, coated wire grille protects the coil from
inadvertent damage, vandalism and inclement weather, while allowing excellent access for cleaning
• Factory-installed, bi-fl ow fi lter drier keeps moisture and dirt out of your system for long and reliable system life
• Service valves with sweat connections and gauge ports provide years of reliable, leak-free use
• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Compact footprint• Top and side compressor and tubing access• Internal pre-wired control box with single-panel access speeds installation• Service ports and controls are accessible while unit is operating• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
Nominal Heating
Capacity (BTUH @ 47 °F)
Voltage-Phase
Maximum Overcurrent
Device (amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
RTC24C2C 24,000 25,000 208/230-1 30 29½” x 29½” x 28” 3/8” 3/4” 224
RTC30C2C 28,000 28,000 208/230-1 30 29½” x 29½” x 28” 3/8” 3/4” 225
RTC36C2C 34,000 34,000 208/230-1 35 29½” x 29½” x 32” 3/8” 3/4” 230
RTC42C2C 40,000 41,000 208/230-1 40 29½” x 29½” x 32” 3/8” 7/8” 236
RTC48C2C 45,000 48,000 208/230-1 45 35⅝” x 35⅝” x 32” 3/8” 7/8” 287
RTC60C2C 58,000 59,000 208/230-1 60 35⅝” x 35⅝” x 36” 3/8” 7/8” 331
LIMITED WARRANTY• 10-Year—Compressor• 10-Year—Parts
Split
Sys
tem
Hea
t Pum
ps
12
RHF TempAssure™ Heat Pump—14 SEER
The Amana™ brand TempAssure™ RHF 14 SEER Heat Pump features energy effi ciencies and operating sound levels that are among the best in the heating and cooling industry. With its 14 SEER rating—and up to 15 SEER with properly matched Amana® brand components—and 7.5 Heating Seasonal Performance Factor (HSPF), you will have lower power bills throughout the life of the system. Other features include a high-effi ciency compressor with overload protection, sound blanket for extra-quiet operation and refrigeration-grade copper tube/enhanced aluminum fi n coils.
• Ultra-high effi ciency heating (9.0 HSPF)• High-effi ciency Copeland® scroll compressor• Refrigerant system protected by a loss-of-charge switch• High-density foam compressor sound blanket• Low-operating sound fan system, including a heavy-gauge, coated wire
condenser fan grille• Tightly spaced, heavy-gauge, coated wire grille protects the coil from
inadvertent damage, vandalism and inclement weather, while allowing excellent access for cleaning
• Factory-installed, bi-fl ow liquid line fi lter drier keeps moisture and dirt out of the system for a long and reliable system life
• Service valves with sweat connections and gauge ports provide years of reliable, leak-free use
• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Compact footprint• Top and side compressor and tubing access• Internal pre-wired control box with single-panel access speeds installation• Service ports and controls are accessible while unit is operating• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
NominalHeating
Capacity(BTUH @ 47 °F)
Voltage-Phase
Maximum Overcurrent
Device (amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
RHF24C2C 24,000 22,700 208/230-1 30 29½” x 29½” x 29½” 3/8” 3/4” 211
RHF30C2C 29,000 28,500 208/230-1 25 29½” x 29½” x 29½” 3/8” 3/4” 230
RHF36C2C 36,000 34,500 208/230-1 40 35⅝” x 35⅝” x 33½” 3/8” 7/8” 293
RHF42C2C 42,000 39,900 208/230-1 45 35⅝” x 35⅝” x 33½” 3/8” 7/8” 293
RHF48C2C 48,500 45,000 208/230-1 50 35⅝” x 35⅝” x 33½” 3/8” 1⅛” 298
LIMITED WARRANTY• Lifetime—Compressor• 10-Year—Parts
Split System H
eat Pumps
13
RHE TempAssure™ Heat Pump—12 SEER
The Amana™ brand TempAssure™ RHE 12 SEER Heat Pump features energy effi ciencies and operating sound levels that are among the best in the heating and cooling industry. With its 12 SEER rating—and up to 13 SEER with properly matched Amana® brand components—and 8.6 HSPF heating effi ciency ratings, you will have lower power bills throughout the life of the system. Other features include a high-effi ciency scroll compressor with overload protection, sound blanket for extra-quiet operation and refrigeration-grade copper tube/enhanced aluminum fi n coils.
• High-effi ciency heating (8.6 HSPF)• High-effi ciency Copeland® scroll compressor• Refrigerant system protected by a loss-of-charge switch• High-density foam compressor sound blanket• Low-operating sound fan system, including a heavy-gauge, coated wire
condenser fan grille• Tightly spaced, heavy-gauge, coated wire grille protects the coil from
inadvertent damage, vandalism and inclement weather, while allowing excellent access for cleaning
• Factory-installed, bi-fl ow liquid line fi lter drier keeps moisture and dirt out of the system for a long and reliable system life
• Service valves with sweat connections and gauge ports provide years of reliable, leak-free use
• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Compact footprint• Top and side compressor and tubing access• Internal pre-wired control box with single-panel access speeds installation• Service ports and controls are accessible while unit is operating• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
NominalHeating
Capacity(BTUH @ 47 °F)
Voltage-Phase
Maximum Overcurrent
Device (amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
RHE18C2C 18,000 18,000 208/230-1 20 29½” x 29½” x 29½” 3/8” 5/8” 167
RHE24C2C 24,000 23,100 208/230-1 25 29½” x 29½” x 29½” 3/8” 3/4” 177
RHE30C2C 29,600 29,300 208/230-1 30 29½” x 29½” x 29½” 3/8” 3/4” 215
RHE36C2C 36,000 34,200 208/230-1 35 29½” x 29½” x 38” 3/8” 3/4” 221
RHE42C2C 42,000 39,300 208/230-1 40 29½” x 29½” x 38” 3/8” 7/8” 230
RHE48C2C 48,500 46,500 208/230-1 50 35⅝” x 35⅝” x 33½” 3/8” 7/8” 281
RHE60C2C 59,500 55,700 208/230-1 60 35⅝” x 35⅝” x 37½” 3/8” 7/8” 327
LIMITED WARRANTY• 10-Year—Compressor• 10-Year—Parts
Split
Sys
tem
Hea
t Pum
ps
14
RHA TempAssure™ Heat Pump—10 SEER
The Amana™ brand TempAssure™ RHA 10 SEER Heat Pump features operating sound levels that are among the best in the heating and cooling industry. With its 10 SEER rating and 7.5 HSPF heating effi ciency ratings, you will have lower power bills throughout the life of the system. Other features include an energy-effi cient compressor with overload protection, sound blanket for extra-quiet operation and refrigeration-grade copper tube/enhanced aluminum fi n coils.
• Energy-effi cient heating (7.5 HSPF)• Energy-effi cient compressor• Refrigerant system protected by loss-of-charge switches• High-density foam compressor sound blanket• Low-operating sound fan system, including a heavy-gauge, coated wire
condenser fan grille• Tightly spaced, heavy-gauge, coated wire grille protects the coil from
inadvertent damage, vandalism and inclement weather, while allowing excellent access for cleaning
• Factory-installed, bi-fl ow liquid line fi lter drier keeps moisture and dirt out of the system for a long and reliable system life
• Service valves with sweat connections and gauge ports provide years of reliable, leak-free use
• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Compact footprint• Top and side compressor and tubing access• Internal pre-wired control box with single-panel access speeds installation• Service ports and controls are accessible while unit is operating• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
LIMITED WARRANTY• 10-Year—Compressor• 5-Year—Parts
Model
Nominal Cooling
Capacity (BTUH)
NominalHeating
Capacity(BTUH @ 47 °F)
Voltage-Phase
Maximum Overcurrent
Device (amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
RHA18C2C 18,000 17,200 208/230-1 20 22½” x 22½” x 26” 3/8” 3/4” 140
RHA24C2C 24,000 21,700 208/230-1 20 22½” x 22½” x 33” 3/8” 3/4” 150
RHA30C2C 30,000 26,700 208/230-1 30 22½” x 22½” x 33” 3/8” 3/4” 160
RHA36C2C 36,000 33,700 208/230-1 35 29½” x 29½” x 30” 3/8” 3/4” 170
RHA42C2C 42,000 38,800 208/230-1 40 29½” x 29½” x 34” 3/8” 7/8” 180
RHA48C2C 48,000 45,100 208/230-1 50 29½” x 29½” x 34” 3/8” 7/8” 170
RHA60C2C 60,000 54,300 208/230-1 60 29½” x 29½” x 38” 3/8” 1⅛” 180
Split System H
eat Pumps
15
CPLE Commercial Heat Pump
• Energy-effi cient compressor with internal pressure relief valve• High-capacity, steel-cased, bi-fl ow heat pump fi lter drier• Discharge line muffl er• Suction line accumulator• Check fl owrater heating mode expansion device• Reliable, time-initiated, temperature-terminated defrost control• Loss-of-charge protection provided by a low-pressure switch• 3- to 5-ton models have R-22 refrigerant-charged for 15’ of refrigerant lines• 3- to 5-ton models are 10 SEER• Brass liquid and suction line service valves mounted at a 45° angle with sweat
connections and service ports• High-effi ciency copper tube/aluminum fi n coil• Heavy-gauge G-90 galvanized steel cabinet with appliance-quality polyester
powder-paint fi nish with 500-hour salt-spray approval• 7½- and 10-ton models comply with ASHRAE Standard 90.1• 7½- and 10-ton models are charged with 2 lbs. of R-22 refrigerant• Electrical Testing Laboratories (ETL) certifi ed
Model
Nominal Cooling
Capacity (BTUH)
Nominal Heating
Capacity(BTUH @ 47 °F)
Voltage-Phase
Maximum Overcurrent
Device (amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
CPLE48-3C 45,000 45,000 208/230-3 30 29” x 29” x 34” 3/8” 7/8” 178
CPLE60-3C 55,000 55,000 208/230-3 30 29” x 29” x 34” 3/8” 7/8” 210
CPLE090-3C 87,000 84,000 208/230-3 60 35” x 35” x 41½” 5/8” 1⅜” 390
CPLE120-3C 109,000 109,000 208/230-3 60 35” x 35” x 41½” 5/8” 1⅜” 440
CPLE090-4C 87,000 84,000 460-3 30 35” x 35” x 41½” 5/8” 1⅜” 390
CPLE120-4C 109,000 109,000 460-3 35 35” x 35” x 41½” 5/8” 1⅜” 440
LIMITED WARRANTY• 5-Year—Compressor• 5-Year—Parts
The Amana™ brand CPLE Commercial Heat Pump cabinet features a polyester powder-paint fi nish over heavy-gauge G-90 galvanized steel that provides premium durability and improved UV protection. Designed for ground-level or rooftop mount, the base pan elevates the unit above the slab to provide excellent water drainage and keep the coil away from debris that can collect inside the heat pump. The unit’s attractive louvered metal guard protects the coil from damage and strengthens the unit.
Split
Sys
tem
Hea
t Pum
ps
16
VHC Distinctions™ Heat Pump—12 SEER
The Amana™ Distinctions™ brand VHC 12 SEER Heat Pumps and matching air handlers and indoor coils offer high-effi ciency heating and cooling performance, easy service and installation fl exibility. The VHC offers economical and dependable cooling comfort and high-effi ciency performance. Value-driven engineering, money-saving performance, reliable components and our quality manufacturing make VHC units perfect for the value-minded homeowner or cost-conscious builder. With its 12 SEER cooling effi ciencies and 8.0 HSPF heating effi ciency ratings—a considerable increase in effi ciency over units manufactured just a few years ago—your savings in energy costs can be substantial, especially during periods of extreme hot or cold weather, when energy use increases dramatically.
• High-effi ciency heating (8.0 HSPF)• High-effi ciency heat pump compressor• Large-bladed condenser fan driven by a permanently lubricated motor with
vertical air discharge reduces operating sound• Factory-installed, bi-fl ow fi lter drier keeps moisture and dirt out of the system for
a long and reliable system life• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Heavy-gauge, coated wire grille protects coil• Compact footprint• Sweat connection, front-seating brass service valves with gauge ports allow for
convenient servicing of the unit• Top and side compressor and tubing access• Internal pre-wired control box with single-panel access speeds installation• Reliable, temperature-activated, time-terminated defrost control• Service ports and controls are accessible while unit is operating• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
Nominal Heating
Capacity(BTUH @ 47 °F)
Voltage-Phase
Maximum Overcurrent
Device (amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
VHC18C2C 18,000 17,400 208/230-1 20 22½” x 22½” x 31” 3/8” 3/4” 150
VHC24C2C 24,000 23,000 208/230-1 25 29½” x 29½” x 24” 3/8” 3/4” 150
VHC30C2C 29,000 28,000 208/230-1 30 29½” x 29½” x 24” 3/8” 3/4” 170
VHC36C2C 35,600 33,000 208/230-1 35 29½” x 29½” x 37” 3/8” 3/4” 200
VHC42C2C 41,500 39,000 208/230-1 40 29½” x 29½” x 37” 3/8” 7/8” 210
VHC48C2C 44,000 44,000 208/230-1 40 29½” x 29½” x 32” 3/8” 7/8” 220
VHC60C2C 55,500 57,000 208/230-1 60 35⅝” x 35⅝” x 32” 3/8” 1⅛” 260
LIMITED WARRANTY• 10-Year—Compressor• 10-Year—Parts
Split System H
eat Pumps
17
VHA Distinctions™ Heat Pump—10 SEER
The Amana™ Distinctions™ brand VHA 10 SEER Heat Pumps and matching air handlers and indoor coils offer high-effi ciency heating and cooling performance, easy service and installation fl exibility. Value-driven engineering, money-saving performance, reliable components and our quality manufacturing make VHA units perfect for the value-minded homeowner or cost-conscious builder. With its 10 SEER cooling effi ciencies and 6.8 HSPF heating effi ciency ratings—a considerable increase in effi ciency over units manufactured just a few years ago—your savings in energy costs can be substantial, especially during periods of extreme hot or cold weather, when energy use increases dramatically.
• Energy-effi cient heat pump compressor• Large-bladed condenser fan driven by a permanently lubricated motor with
vertical air discharge reduces operating sound• Factory-installed, bi-fl ow fi lter drier keeps moisture and dirt out of the system for
a long and reliable system life• Copper tube/enhanced aluminum fi n coil• Durable, long-lasting painted steel cabinet with rust-resistant screws provides
superior UV protection• Heavy-gauge, coated wire grille protects coil• Compact footprint• Sweat connection, front-seating brass service valves with gauge ports allow for
convenient servicing of the unit• Top and side compressor and tubing access• Internal pre-wired control box with single-panel access speeds installation• Reliable, temperature-activated, time-terminated defrost control• Service ports and controls are accessible while unit is operating• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
Nominal Heating
Capacity(BTUH @ 47 °F)
Voltage-Phase
Maximum Overcurrent
Device (amps)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
VHA18C2C 19,000 17,200 208/230-1 20 22½” x 22½” x 25” 3/8” 3/4” 140
VHA24C2C 23,200 21,700 208/230-1 20 22½” x 22½” x 25” 3/8” 3/4” 142
VHA30C2C 28,200 26,600 208/230-1 30 22½” x 22½” x 31” 3/8” 3/4” 150
VHA36C2C 35,000 33,700 208/230-1 35 29½” x 29½” x 29” 3/8” 3/4” 170
VHA42C2C 39,500 38,800 208/230-1 40 29½” x 29½” x 33” 3/8” 7/8” 175
VHA48C2C 45,000 45,100 208/230-1 40 29½” x 29½” x 33” 3/8” 7/8” 175
VHA60C2C 60,000 54,300 208/230-1 60 29½” x 29½” x 30” 3/8” 1⅛” 180
LIMITED WARRANTY• 5-Year—Compressor• 5-Year—Parts
Featuring the Million-Air™ Heat Exchanger
In striving to exceed your expectations, we emphasize manufacturing excellence in everything that bears our name. Our dedicated team of sales and service technicians is always ready to assist you with product information, installation and maintenance. Just call 888/292-6262 or visit us online at www.amana-hac.com. Our products refl ect a proud spirit of craftsmanship—and an assurance that you can always safely place your trust in Amana.
Find Comfort in the Enduring Strength of Amana
A nearly indestructible Silicon Nitride Igniter and Adaptive Learning Algorithm comprise our impressive new SureStart ignition system.
Silicon Nitride Igniter. Ours is seven times stronger than common silicon carbide igniters. It’s so rugged, it can be pressed through a piece of wood without the igniter breaking, and it will operate while exposed to water, condensation, bleach and other household contaminants.
Adaptive Learning Algorithm. This ensures the igniter delivers just the right temperature for ignition – and not a bit more.
The SureStart ignition system automatically compensates for variations in line voltage and even igniter aging for long life and a reliable start every time. SureStart has been tested in more than 2 million cycles.
SureStart Ignition System
The industry standard (ANSI Z21.47) requires all furnace manufacturers to test heat exchangers to 10,000 cycles. But we wanted more. At least 100 times more!
Our revolutionary Million-Air™ stainless-steel heat exchanger has gone beyond one million cycles. And the Million-Air™ is
still running without any sign of failure. That means igniting the burner, heating the exchanger to 1,100 °F and allowing it to cool to 200 °F. Then repeating the process more than one million times. A million cycles can equate to a century of use under normal operating conditions and maintenance.
The Million-Air™ draws on three key technologies that work together with the physical properties of the stainless steel tubes. The result is a tight, strong, long-lasting heat exchanger that is unsurpassed in the industry.
1. Wrinkle-bend Technology. This allows us to form stainless steel tubes to precise specifi cations, while nearly eliminating the manufacturing stresses that can be placed on the material. Plus, the wrinkles enhance heat transfer by creating turbulence inside the tube.
2. Dual-diameter Tubing. As hot gasses pass from the larger to the smaller diameter tube, the gas releases heat and the velocity of the gas increases. This ensures that hotter gas remains in the chamber longer for optimum heat transfer to the home.
3. Muffl er-joint Technology. Where the tubes are joined together and to the vestibule panel, the Million-Air™ makes use of the properties of thermal growth. The larger tube is drawn to a smaller diameter and fi tted inside the smaller tube. During operation, the larger tube is hotter and, consequently, the joint actually becomes more solid. The same principle is employed where the tubes are joined to the vestibule panel.
18
Gas Furnaces
19
AMV9/ACV9 Two-Stage, Variable-Speed Gas Furnace—96% AFUE
The Amana® brand AMV9/ACV9 96% AFUE Two-Stage, Variable-Speed Gas Furnaces feature our patented, heavy-duty Million-Air™ stainless-steel heat exchanger and recuperative coil. The next-generation SureStart™ silicon nitride hot surface ignition system increases reliability. These furnaces are completely assembled at our factory and run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked-enamel fi nish, these units can be installed in a variety of locations.
• Patented, heavy-duty Million-Air™ stainless-steel heat exchanger and recuperative coil for maximum effi ciency*
• Designed for multi-position installation—AMV9: upfl ow, horizontal right or left; ACV9: downfl ow, horizontal right or left
• Energy-saving, reliable next-generation SureStart™ silicon nitride hot surface ignition system*
• Auto-Comfort mode helps to effi ciently create and maintain a comfortable climate by intuitively adjusting to the room’s environment
• Up to 96% AFUE• Aluminized-steel inshot burners • 2-stage gas valve and super-effi cient, quiet variable-speed blower motor • Quiet, 2-speed, induced-draft blower assembly • Integrated furnace control with improved diagnostics • Low voltage terminal blocks • Multiple fl ame roll-out switches, blower door safety switch, outlet-air limit switch
and pressure switch for proof of combustion air • 40VA transformer for heating and air conditioning control service • Combination redundant 2-stage gas valve and regulator • Top venting is standard; alternate fl ue/vent located on right side (AMV9)• Completely assembled, factory run-tested furnace for heating or combination
heating/cooling application • All models comply with California NOx Standards • Suitable for direct vent (2-pipe) or non-direct vent (1-pipe) applications • Heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-
enamel fi nish • Attractive, two-tone gray fi nish • Foil-face insulation lines the heat exchanger compartment • Coil and furnace fi t fl ush for easy installation • Convenient left or right connection for gas and electric service • Bottom or side air inlet (AMV9) • Removable solid bottom (AMV9)
LIMITED WARRANTY• Lifetime Replacement of Entire
Unit if Heat Exchanger or Recuperative Coil Fails
• 5-Year—Parts
Model
High Fire Low FireAvailable Cooling
@ 0.5” ESP (tons)
DimensionsW x D x H
Nominal CFM
@ 0.1” - 0.8” ESP
Shipping Weight
(pounds)
Rated Heating
Input(BTUH)
Rated Heating Output(BTUH)
Rated Heating
Input(BTUH)
Rated Heating Output(BTUH)
AMV90453BXA 46,000 44,300 32,000 30,800 1.5 - 3.0 17½” x 28” x 40” 380 - 1,320 133
AMV90704CXA 69,000 66,900 48,000 46,400 1.5 - 4.0 21” x 28” x 40” 378 - 1,572 135
AMV90905DXA 92,000 88,800 64,000 61,700 2.0 - 5.0 24½” x 28” x 40” 513 - 1,980 172
AMV91155DXA 115,000 111,100 80,000 77,400 2.0 - 5.0 24½” x 28” x 40” 514 - 1,980 175
ACV90704CXA 69,000 65,300 48,000 45,000 1.5 - 4.0 21” x 28” x 40” 378 - 1,572 136
ACV90905DXA 92,000 86,500 64,000 60,100 2.0 - 5.0 24½” x 28” x 40” 513 - 1,980 172
* See page 18 for further explanation
Gas
Fur
nace
s
20
AMS9/ACS9 Single-Stage, Multi-Speed Gas Furnace—93% AFUE
The Amana® brand AMS9/ACS9 93% AFUE Single-Stage, Multi-Speed Gas Furnaces feature our patented, heavy-duty Million-Air™ stainless-steel heat exchanger and recuperative coil. The next-generation SureStart™ silicon nitride hot surface ignition system increases reliability. These furnaces are completely assembled at our factory and run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked-enamel fi nish, these units can be installed in a variety of locations.
• Patented, heavy-duty Million-Air™ stainless-steel heat exchanger and recuperative coil for maximum effi ciency*
• Designed for multi-position installation—AMS9: upfl ow, horizontal right or left; ACS9: downfl ow, horizontal right or left
• Energy-saving, reliable next-generation SureStart™ silicon nitride hot surface ignition system*
• Aluminized-steel inshot burners • Energy-saving PSC, multi-speed, direct-drive blower motor • Quiet, corrosion-resistant, induced-draft blower assembly • Integrated furnace control with improved diagnostics • Low voltage terminal blocks • Multiple fl ame roll-out switches, blower door safety switch, outlet-air limit switch
and pressure switch for proof of combustion air • 40VA transformer for heating and air conditioning control service • Combination redundant gas valve and regulator • Top venting is standard; alternate fl ue/vent located on right side (AMS9)• Completely assembled, factory run-tested furnace for heating or combination
heating/cooling application • All models comply with California NOx Standards • Suitable for direct vent (2-pipe) or non-direct vent (1-pipe) applications • Heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-
enamel fi nish • Attractive, two-tone gray fi nish • Foil-face insulation lines the heat exchanger compartment • Coil and furnace fi t fl ush for easy installation • Convenient left or right connection for gas and electric service • Bottom or side air inlet (AMS9) • Removable, solid bottom (AMS9)
ModelRated Heating
Input(BTUH)
Rated Heating Output(BTUH)
Available Cooling
@ 0.5” ESP (tons)
DimensionsW x D x H
Nominal CFM @ 0.5” ESP
Shipping Weight
(pounds)AMS90453BXA 46,000 42,800 3.0 17½” x 28” x 40” 674 - 1,128 132AMS90703BXA 69,000 64,400 3.0 17½” x 28” x 40” 657 - 1,201 135AMS90704CXA 69,000 64,400 4.0 21” x 28” x 40” 1,095 - 1,661 136AMS90904CXA 92,000 86,000 4.0 21” x 28” x 40” 1,062 - 1,566 158AMS90905DXA 92,000 86,000 5.0 24½” x 28” x 40” 1,168 - 1,978 172AMS91155DXA 115,000 106,500 5.0 24½” x 28” x 40” 1,159 - 1,906 175ACS90453BXA 46,000 42,800 3.0 17½” x 28” x 40” 674 - 1,128 132ACS90703BXA 69,000 64,400 3.0 17½” x 28” x 40” 657 - 1,201 135ACS90704CXA 69,000 64,400 4.0 21” x 28” x 40” 1,095 - 1,661 135ACS90904CXA 92,000 86,000 4.0 21” x 28” x 40” 1,062 - 1,566 156ACS90905DXA 92,000 86,000 5.0 24½” x 28” x 40” 1,168 - 1,978 173ACS91155DXA 115,000 106,500 5.0 24½” x 28” x 40” 1,159 - 1,906 175
LIMITED WARRANTY• Lifetime Replacement of Entire
Unit if Heat Exchanger or Recuperative Coil Fails
• 5-Year—Parts
* See page 18 for further explanation
Gas Furnaces
21
AMV8 Two-Stage, Variable-Speed Gas Furnace—80% AFUE
The Amana® brand AMV8 80% AFUE Two-Stage, Variable-Speed Gas Furnace features our patented, heavy-duty Million-Air™ stainless-steel heat exchanger and recuperative coil. The next-generation SureStart™ silicon nitride hot surface ignition system increases reliability. These furnaces are completely assembled at our factory and run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked-enamel fi nish, these units can be installed in a variety of locations.
• Patented, heavy-duty Million-Air™ stainless-steel heat exchanger and recuperative coil for maximum effi ciency*
• Designed for multi-position installation—upfl ow, horizontal right or left • Energy-saving, reliable next-generation SureStart™ silicon nitride hot surface
ignition system* • Auto-Comfort mode helps to effi ciently create and maintain a comfortable
climate by intuitively adjusting to the room’s environment • Aluminized-steel inshot burners • 2-stage gas valve and super-effi cient, quiet variable-speed blower motor • Quiet, 2-speed, induced-draft blower assembly • Integrated furnace control with improved diagnostics • Low voltage terminal blocks • Multiple fl ame roll-out switches, blower door safety switch, outlet-air limit switch
and pressure switch for proof of combustion air • 40VA transformer for heating and air conditioning control service • Combination redundant 2-stage gas valve and regulator • A rotating combustion air blower that provides the option of venting the
furnace through the top, right-hand side or left-hand side • Completely assembled, factory run-tested furnace for heating or combination
heating/cooling application • All models comply with California NOx Standards • Heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-
enamel fi nish • Attractive, two-tone gray fi nish • Foil-face insulation lines the heat exchanger compartment • Coil and furnace fi t fl ush for easy installation• Convenient left or right connection for gas and electric service • Bottom or side air inlet• Removable, solid bottom
LIMITED WARRANTY• Lifetime Replacement of Entire
Unit if Heat Exchanger or Recuperative Coil Fails
• 5-Year—Parts
* See page 18 for further explanation
Model
High Fire Low FireAvailable Cooling
@ 0.5” ESP (tons)
DimensionsW x D x H
Nominal CFM
@ 0.1” - 0.8” ESP
Shipping Weight
(pounds)
Rated Heating
Input(BTUH)
Rated Heating Output(BTUH)
Rated Heating
Input(BTUH)
Rated Heating Output(BTUH)
AMV80704BXA 70,000 57,400 52,500 42,000 1.5 - 3.0 17½” x 28” x 39” 361 - 1,540 152
AMV80905CXA 90,000 73,600 67,500 54,000 2.0 - 5.0 21” x 28” x 39” 563 - 1,980 178
AMV81155CXA 115,000 92,000 86,000 69,000 2.0 - 5.0 21” x 28” x 39” 563 - 1,980 194
Gas
Fur
nace
s
22
AMS8/ADS8 Single-Stage, Multi-Speed Gas Furnace—80% AFUE
The Amana® brand AMS8/ADS8 80% AFUE Single-Stage, Multi-Speed Gas Furnaces feature our patented, heavy-duty Million-Air™ stainless-steel heat exchanger and recuperative coil. The next-generation SureStart™ silicon nitride hot surface ignition system increases reliability. These furnaces are completely assembled at our factory and run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked-enamel fi nish, these units can be installed in a variety of locations.
• Patented, heavy-duty Million-Air™ stainless-steel heat exchanger and recuperative coil for maximum effi ciency*
• Designed for multi-position installation—AMS8: upfl ow, horizontal right or left; ADS8: dedicated downfl ow
• Energy-saving, reliable next-generation SureStart™ silicon nitride hot surface ignition system*
• Aluminized-steel inshot burners • Energy-saving PSC, multi-speed, direct-drive blower motor • Quiet, corrosion-resistant, induced-draft blower assembly • Integrated furnace control with diagnostics • Low voltage terminal blocks • Multiple fl ame roll-out switches, blower door safety switch, outlet-air limit
switch and pressure switch for proof of combustion air • 40VA transformer for heating and air conditioning control service • Combination redundant gas valve and regulator • A rotating combustion air blower (AMS8) that provides the option of venting
the furnace through the top, right-hand side or left-hand side • Completely assembled, factory run-tested furnace for heating or
combination heating/cooling application • Specifi c models comply with California NOx Standards • Heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-
enamel fi nish • Attractive, two-tone gray fi nish • Foil-face insulation lines the heat exchanger compartment • Coil and furnace fi t fl ush for easy installation • Convenient left or right connection for gas and electric service • Bottom or side air inlet (AMS8) • Removable, solid bottom (AMS8)
Model Rated Heating Input (BTUH)
Rated Heating Output (BTUH)
Available Cooling @
0.5” ESP (tons)
DimensionsW x D x H
Nominal CFM @ 0.5” ESP
Shipping Weight
(pounds)AMS80453ANA* 45,000 36,000 3.0 14” x 28” x 39” 636 - 1,344 120 AMS80703ANA* 70,000 56,000 3.0 14” x 28” x 39” 625 - 1,273 130 AMS80704BNA* 70,000 56,000 4.0 17½” x 28” x 39” 1,057 - 1,897 143 AMS80903BNA 90,000 72,000 3.0 17½” x 28” x 39” 635 - 1,493 153 AMS80904BNA* 90,000 72,000 4.0 17½” x 28” x 39” 1,080 - 1,891 153 AMS80905CNA* 90,000 72,000 5.0 21” x 28” x 39” 1,078 - 1,886 163 AMS81155CNA* 115,000 92,000 5.0 21” x 28” x 39” 1,090 - 2,076 163 AMS81405DNA* 140,000 112,000 5.0 24½” x 28” x 39” 1,207 - 2,152 183 ADS80453ANA 45,000 36,000 3.0 14” x 28” x 39” 637 - 1,262 120 ADS80703ANA* 70,000 56,000 3.0 14” x 28” x 39” 616 - 1,262 130 ADS80904BNA* 90,000 72,000 4.0 17½” x 28” x 39” 981 - 1,844 153 ADS81155CNA* 115,000 92,000 5.0 21” x 28” x 39” 1,001 - 2,134 175
LIMITED WARRANTY• Lifetime Replacement of Entire
Unit if Heat Exchanger or Recuperative Coil Fails
• 5-Year—Parts
* See page 18 for further explanation
* Low NOx model available.
Gas Furnaces
23
DMS9/DCS9 Distinctions™ Single-Stage, Multi-Speed Gas Furnace—93% AFUE
The Amana® Distinctions™ brand DMS9/DCS9 93% AFUE Single-Stage, Multi-Speed Gas Furnaces feature our patented aluminized-steel tubular heat exchanger and a Norton® mini-igniter with patented, adaptive technology. These furnaces are completely assembled at our factory and run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked-enamel fi nish, these units can be installed in a variety of locations.
• Corrosion-resistant, aluminized-steel tubular heat exchanger and stainless-steel recuperative coil for maximum effi ciency
• Designed for multi-position installation—DMS9: upfl ow, horizontal right or left; DCS9: downfl ow, horizontal right or left
• Energy-saving, reliable Norton mini-igniter with patented adaptive learning algorithm to maximize igniter life
• Aluminized-steel inshot burners • Energy-saving PSC, multi-speed, direct-drive blower motor • Quiet, corrosion-resistant, induced-draft blower assembly • Integrated furnace control with improved diagnostics • Low voltage terminal blocks • Multiple fl ame roll-out switches, blower door safety switch, outlet-air limit switch
and pressure switch for proof of combustion air • 40VA transformer for heating and air conditioning control service • Combination redundant gas valve and regulator • Top venting is standard; alternate fl ue/vent located on right side (DMS9)• Completely assembled, factory run-tested furnace for heating or combination
heating/cooling application • All models comply with California NOx Standards • Suitable for direct vent (2-pipe) or non-direct vent (1-pipe) applications • Heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-
enamel fi nish • Attractive, two-tone gray fi nish• Foil-face insulation lines the heat exchanger compartment • Coil and furnace fi t fl ush for easy installation • Convenient left or right connection for gas and electric service • Bottom or side air inlet (DMS9) • Removable, solid bottom (DMS9)
LIMITED WARRANTY• Lifetime—Heat Exchanger• 10-Year—Replacement of
Entire Unit if Heat Exchanger or Recuperative Coil Fails
• 5-Year—Parts
Model Rated Heating Input (BTUH)
Rated Heating Output (BTUH)
Available Cooling
@ 0.5” ESP (tons)
DimensionsW x D x H
Nominal CFM @ 0.5” ESP
Shipping Weight
(pounds)DMS90453BXA 46,000 42,800 3.0 17½” x 28” x 40” 674 - 1,128 132 DMS90703BXA 69,000 64,400 3.0 17½” x 28” x 40” 657 - 1,201 135 DMS90704CXA 69,000 64,400 4.0 21” x 28” x 40” 1,095 - 1,661 136 DMS90904CXA 92,000 86,000 4.0 21” x 28” x 40” 1,062 - 1,566 158 DMS90905DXA 92,000 86,000 5.0 24½” x 28” x 40” 1,168 - 1,978 172 DMS91155DXA 115,000 106,500 5.0 24½” x 28” x 40” 1,159 - 1,906 175 DCS90703BXA 69,000 64,400 3.0 17½” x 28” x 40” 657 - 1,201 136DCS90904CXA 92,000 86,000 4.0 21” x 28” x 40” 1,062 - 1,566 157DCS91155DXA 115,000 106,500 5.0 24½” x 28” x 40” 1,159 - 1,906 171
Gas
Fur
nace
s
24
DMS8/DDS8 Distinctions™ Single-Stage, Multi-Speed Gas Furnace—80% AFUE
• Corrosion-resistant, aluminized-steel tubular heat exchanger • Designed for multi-position installation—DMS8: upfl ow, horizontal right or left;
DDS8: dedicated downfl ow • Energy-saving, reliable Norton mini-igniter with patented adaptive learning
algorithm to maximize igniter life • Aluminized-steel inshot burners • Energy-saving PSC, multi-speed, direct-drive blower motor • Quiet, corrosion-resistant, induced-draft blower assembly • Integrated furnace control with diagnostics • Low voltage terminal blocks • Multiple fl ame roll-out switches, blower door safety switch, outlet-air limit switch
and pressure switch for proof of combustion air • 40VA transformer for heating and air conditioning control service • Combination redundant gas valve and regulator • A rotating combustion air blower (DMS8) that provides the option of venting
the furnace through the top, right-hand side or left-hand side • Completely assembled, factory run-tested furnace for heating or combination
heating/cooling application • Specifi c models comply with California NOx Standards • Heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-
enamel fi nish • Attractive, two-tone gray fi nish • Foil-face insulation lines the heat exchanger compartment • Coil and furnace fi t fl ush for easy installation • Convenient left or right connection for gas and electric service • Bottom or side air inlet (DMS8) • Removable, solid bottom (DMS8)
The Amana® Distinctions™ brand DMS8/DDS8 80% AFUE Single-Stage, Multi-Speed Gas Furnaces feature our patented aluminized-steel tubular heat exchanger and a Norton® mini-igniter with patented, adaptive technology. These furnaces are completely assembled at our factory and run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked-enamel fi nish, these units can be installed in a variety of locations.
Model Rated Heating Input (BTUH)
Rated Heating Output (BTUH)
Available Cooling
@ 0.5” ESP (tons)
DimensionsW x D x H
Nominal CFM @ 0.5” ESP
Shipping Weight
(pounds)DMS80453ANA 45,000 36,000 3.0 14” x 28” x 39” 636 - 1,344 120 DMS80703ANA 70,000 56,000 3.0 14” x 28” x 39” 625 - 1,273 130 DMS80704BNA 70,000 56,000 4.0 17½” x 28” x 39” 1,057 - 1,897 143 DMS80904BNA 90,000 72,000 4.0 17½” x 28” x 39” 1,080 - 1,891 153 DMS80905CNA 90,000 72,000 5.0 21” x 28” x 39” 1,078 - 1,886 163 DMS81155CNA 115,000 92,000 5.0 21” x 28” x 39” 1,090 - 2,076 163 DMS81405DNA 140,000 112,000 5.0 24½” x 28” x 39” 1,207 - 2,152 183 DDS80453AXA 45,000 36,000 3.0 14” x 28” x 39” 637 - 1,262 120DDS80703AXA 70,000 56,000 3.0 14” x 28” x 39” 616 - 1,262 130 DDS80904BXA 90,000 72,000 4.0 17½” x 28” x 39” 981 - 1,844 153 DDS81155CXA 115,000 92,000 5.0 21” x 28” x 39” 1,001 - 2,134 163
LIMITED WARRANTY• Lifetime—Heat Exchanger• 10-Year—Replacement of
Entire Unit if Heat Exchanger or Recuperative Coil Fails
• 5-Year—Parts
Gas Furnaces
25
DHS8 Distinctions™ Single-Stage, High Airflow Gas Furnace—80% AFUE
• Corrosion-resistant, aluminized-steel tubular heat exchanger • Designed for high airfl ow, low-leakage applications• Designed for upfl ow, horizontal right or left installation • Energy-saving, reliable Norton mini-igniter with patented adaptive learning
algorithm to maximize igniter life • Aluminized-steel inshot burners • Energy-saving PSC, multi-speed, direct-drive blower motor • Quiet, corrosion-resistant, induced-draft blower assembly • Integrated furnace control with diagnostics • Low voltage terminal blocks • Multiple fl ame roll-out switches, blower door safety switch, outlet-air limit switch
and pressure switch for proof of combustion air • 40VA transformer for heating and air conditioning control service • Combination redundant gas valve and regulator • A rotating combustion air blower that provides the option of venting the
furnace through the top, right-hand side or left-hand side • Completely assembled, factory run-tested furnace for heating or combination
heating/cooling application • Heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-
enamel fi nish • Attractive, two-tone gray fi nish • Foil-face insulation lines the heat exchanger compartment • Coil and furnace fi t fl ush for easy installation • Convenient left or right connection for gas and electric service • Bottom or side air inlet • Removable, solid bottom
The Amana® Distinctions™ brand DHS8 80% AFUE Single-Stage, High Airfl ow Gas Furnace features our patented aluminized-steel tubular heat exchanger and a Norton® mini-igniter with patented, adaptive technology. These furnaces are completely assembled at our factory and run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked-enamel fi nish, these units can be installed in a variety of locations.
ModelRated Heating
Input(BTUH)
Rated Heating Output(BTUH)
Available Cooling
@ 0.5” ESP (tons)
DimensionsW x D x H
Nominal CFM @ 0.5” ESP
Shipping Weight (pounds)
DHS80453AXA 45,000 36,000 3.0 14” x 28” x 39” 1,045 - 1,499 120 DHS80704BXA 70,000 56,000 4.0 17½” x 28” x 39” 1,160 - 1,773 130 DHS80905CXA 90,000 72,000 5.0 21” x 28” x 39” 1,071 - 2,134 153
LIMITED WARRANTY• Lifetime—Heat Exchanger• 10-Year—Replacement of
Entire Unit if Heat Exchanger or Recuperative Coil Fails
• 5-Year—Parts
Pack
aged
Air
Con
ditio
ners
26
PCC Packaged Air Conditioner—12 SEER
The Amana® brand PCC 12 SEER Packaged Air Conditioner offers outstanding cooling effi ciency. Featuring a high-effi ciency Copeland® scroll compressor, this unit will provide you with lower power bills throughout the life of the system. Its compact design is ideal for ground-level or rooftop applications.
• Highly reliable Copeland scroll compressors with sound blankets• Horizontal supply and return are easily convertible to down-discharge airfl ow• Factory-installed base rails provide strength, easier handling, air circulation
under the unit and lifting-lug holes for rooftop installations• Heavy-gauge, zinc-coated steel cabinet with appliance-quality powder-
paint fi nish• Attractive, two-tone gray exterior• Permanently lubricated outdoor fan motor with vertical air discharge helps
ensure quiet operation• Positive-fl ow condensate drain pan (external trap supplied with unit)• Bottom, side and back electrical connections; fl exible set-up for left- or right-
side wiring• Round duct connections with 3” collars or fl ange connection for 16” x 16”
ductwork (PCC24-48); built-in fl ange connections for 14” x 14”ductwork (PCC60)
• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
Electric Heat Capacity
(kW)
NominalCooling
CFM
Voltage-Phase
Maximum Overcurrent Protection
(amps)
DimensionsW x D x H
Shipping Weight
(pounds)
PCC24C02F 23,000 5, 7, 10, 15, 20 800 208/230-1 25 47⅛” x 37⅛” x 30½” 306
PCC30C02F 28,800 5, 7, 10, 15, 20 1,000 208/230-1 30 47⅛” x 37⅛” x 30½” 318
PCC36C02F 34,400 5, 7, 10, 15, 20 1,200 208/230-1 30 47⅛” x 37⅛” x 30½” 327
PCC42C02F 42,000 5, 7, 10, 15, 20 1,400 208/230-1 45 47⅛” x 37⅛” x 36½” 374
PCC48C02F 49,000 5, 7, 10, 15, 20 1,600 208/230-1 45 47⅛” x 37⅛” x 36½” 377
PCC60C02F 58,500 5, 7, 10, 15, 20 2,000 208/230-1 60 47⅛” x 37⅛” x 36½” 382
LIMITED WARRANTY• 10-Year—Compressor• 10-Year—Parts
Packaged Air Conditioners
27
PCA Packaged Air Conditioner—10 SEER
The Amana® brand PCA 10 SEER Packaged Air Conditioner offers outstanding cooling effi ciency. The PCA features an energy-effi cient compressor. The PCA’s compact design is ideal for ground-level or rooftop applications.
• Energy-effi cient compressor• Horizontal supply and return are easily convertible to down-discharge airfl ow• Factory-installed base rails provide strength, easier handling, air circulation
under the unit and lifting-lug holes for rooftop installations• Heavy-gauge, zinc-coated steel cabinet with appliance-quality powder-
paint fi nish• Attractive, two-tone gray exterior• Permanently lubricated outdoor fan motor with vertical air discharge helps
ensure quiet operation• Positive-fl ow condensate drain pan (external trap supplied with unit)• Bottom, side and back electrical connections; fl exible set-up for left- or right-
side wiring• Excellent serviceability via internal gauge ports, convenient control box,
compressor and condenser fan locations and by removing the top cover• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
Electric Heat Capacity
(kW)
NominalCooling
CFM
Voltage-Phase
Maximum Overcurrent Protection
(amps)
DimensionsW x D x H
Shipping Weight
(pounds)
PCA24C02F 24,000 5, 7, 10, 15, 20 800 208/230-1 25 47⅛” x 37⅛” x 30½” 313
PCA30C02F 29,600 5, 7, 10, 15, 20 1,000 208/230-1 35 47⅛” x 37⅛” x 30½” 323
PCA36C02F 36,000 5, 7, 10, 15, 20 1,200 208/230-1 35 47⅛” x 37⅛” x 30½” 333
PCA42C02F 40,500 5, 7, 10, 15, 20 1,400 208/230-1 45 47⅛” x 37⅛” x 36½” 363
PCA48C02F 47,000 5, 7, 10, 15, 20 1,600 208/230-1 50 47⅛” x 37⅛” x 36½” 369
PCA60C02F 58,000 5, 7, 10, 15, 20 2,000 208/230-1 60 47⅛” x 37⅛” x 36½” 410
LIMITED WARRANTY• 5-Year—Compressor• 5-Year—Parts
Pack
aged
Air
Con
ditio
ners
28
PCK Commercial Packaged Air Conditioner
The Amana® brand PCK Commercial Packaged Air Conditioner features energy-effi cient cooling. This self-contained unit allows for a ground or rooftop mount application. The fully insulated air handling compartment has convenient access panels, and its base pan elevates the unit above the slab. The PCK’s exterior has a powder-paint fi nish.
• Energy-effi cient compressor with internal relief valve• Copper tube/aluminum fi n coil• High-static, multi-speed evaporator blower motor• Totally enclosed, permanently lubricated condenser fan motor• Vertical air discharge for quiet operation• Fully charged R-22 system• Liquid line fi lter drier• Fully insulated air handling compartment has convenient access panels• Heavy-gauge, zinc-coated steel cabinet with appliance-quality powder-
paint fi nish• Attractive Architectural Gray exterior
Model
Nominal Cooling
Capacity (BTUH)
Electric Heat Capacity
(kW)
NominalCooling
CFMHigh/Low
Voltage-Phase
Maximum Overcurrent Protection
(amps)
DimensionsW x D x H
Shipping Weight
(pounds)
PCK036-3C 36,000 5, 8, 10, 15, 20 1,325/1,165 208/230-3 20 56⅜” x 24½” x 27⅛” 280
PCK048-3C 47,000 5, 8, 10, 15, 20 1,795/1,580 208/230-3 30 63⅛” x 32⅛” x 29⅝” 365
PCK060-3C 58,000 5, 8, 10, 15, 20 2,220/1,970 208/230-3 40 63⅛” x 32⅛” x 34⅝” 375
PCK060-4C 58,000 5, 8, 10, 15, 20 2,220/1,970 460-3 20 63⅛” x 32⅛” x 34⅝” 375
LIMITED WARRANTY• 5-Year—Compressor• 5-Year—Parts
Packaged Air Conditioners
29
PCC Commercial Packaged Air Conditioner
The Amana® brand PCC Commercial Packaged Air Conditioner features energy-effi cient combination electric heat/electric cooling. Housed inside a heavy-gauge, zinc-coated steel cabinet with weather-resistant powder-paint fi nish, this unit allows for over/under or downfl ow applications. Its control box and dual high-effi ciency scroll compressors with internal motor protection for two-stage cooling are easily accessible from side access panels, making maintenance and service convenient.
Model
Nominal Cooling
Capacity (BTUH)
Electric Heat Capacity
(kW)
NominalCooling
CFM
Voltage-Phase
Maximum Overcurrent Protection
(amps)
DimensionsW x D x H
Shipping Weight
(pounds)
PCC090-3A 86,000 20, 30, 40 3,000 208/230-3 60 74½” x 74½” x 36” 1,000
PCC120-3A 116,000 20, 30, 40 3,800 208/230-3 70 74½” x 74½” x 52” 1,290
PCC090-4A 86,000 20, 30, 40 3,000 460-3 30 74½” x 74½” x 36” 1,000
PCC120-4A 116,000 20, 30, 40 3,800 460-3 35 74½” x 74½” x 52” 1,290
• Dual high-effi ciency scroll compressors with internal motor protection(2-stage cooling)
• Compressor grommets for vibration isolation• Time delay for compressors’ sequence• Fully charged R-22 systems• High- and low-pressure controls on all systems• Mild ambient switch• Two independent condenser coils for 2-stage operation• Totally enclosed, permanently lubricated outdoor fan motors• Vertical discharge with removable grilles provides easy access to fans
and motors• Enhanced copper tube/aluminum fi n coil• Expansion valve evaporator coil• Galvanized steel, powder-coated drain pan with ¾” NPT
condensate connection• Belt-driven, variable-pitch sheave permits multi-speed adjustment• Centrifugal fan for quiet and effi cient operation• Field-installed electric heat kits with rust-resistant nickel chromium
heating elements• Heavy-gauge, zinc-coated steel cabinet with appliance-quality powder-
paint fi nish• Attractive Architectural Gray exterior• Built-in fi lter rack holds 2” fi lters (fi lters included)• Control box and compressors accessible from side access panels• Factory wiring conveniently arranged to install accessories• Base rails with fork slots for convenient handling and added rigidity• ASHRAE 90.1 approved
LIMITED WARRANTY• 5-Year—Compressor• 5-Year—Parts
Pack
aged
Hea
t Pum
ps
30
PHD Packaged Heat Pump—13 SEER
The Amana™ brand PHD 13 SEER Packaged Heat Pump offers outstanding year-round heating and cooling comfort. Featuring a high-effi ciency Copeland® scroll compressor, you will enjoy lower power bills throughout the life of the system. The unit is equipped with sound blankets for extra-quiet operation, and its compact design is ideal for ground-level or rooftop applications.
• Energy-effi cient heating (7.1 HSPF)• High-effi ciency Copeland scroll compressors with sound blankets• Horizontal supply and return are easily convertible to down-discharge airfl ow• Factory-installed base rails provide strength, easier handling, air circulation
under the unit and lifting-lug holes for rooftop installations• Heavy-gauge, zinc-coated steel cabinet with appliance-quality powder-
paint fi nish• Attractive, two-tone gray exterior• Permanently lubricated outdoor fan motor and vertical air discharge helps
ensure quiet operation• Positive-fl ow condensate drain pan (external trap supplied with unit)• Bottom, side and back electrical connections; fl exible set-up for left- or right-
side wiring• Round duct connections with 3” collars or fl ange connection for 16” x 16” ductwork• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary
Air Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
Nominal Heating
Capacity (BTUH @ 47 °F)
Electric Heat Capacity
(kW)
NominalCooling
CFM@ 0.5” ESP
Voltage-Phase
Maximum Overcurrent Protection
(amps)
DimensionsW x D x H
Shipping Weight
(pounds)
PHD24C02F1 24,000 23,600 5, 7, 10, 15, 20 800 208/230-1 25 47⅛” x 37⅛” x 30½” 315
PHD30C02F1 29,400 29,400 5, 7, 10, 15, 20 1,000 208/230-1 30 47⅛” x 37⅛” x 30½” 324
PHD36C02F1 34,000 33,000 5, 7, 10, 15, 20 1,200 208/230-1 30 47⅛” x 37⅛” x 30½” 365
PHD42C02F1 40,000 40,000 5, 7, 10, 15, 20 1,400 208/230-1 35 47⅛” x 37⅛” x 30½” 373
PHD48C02F1* 48,000 47,000 5, 7, 10, 15, 20 1,600 208/230-1 50 47⅛” x 37⅛” x 36½” 378
PHD60C02F1 57,000 55,000 5, 7, 10, 15, 20 2,000 208/230-1 60 47⅛” x 37⅛” x 36½” 388
* The PHD48 model is only available in 12 SEER
LIMITED WARRANTY• Lifetime—Compressor• 10-Year—Parts
Packaged Heat Pum
ps
31
PHB Packaged Heat Pump—11 SEER
The Amana™ brand PHB 11 SEER Packaged Heat Pump offers outstanding year-round heating and cooling comfort. Powered by energy-effi cient compressors, you will enjoy lower power bills throughout the life of the system. The PHB is ideal for ground-level or rooftop applications.
• Energy-effi cient heating (6.8 HSPF)• Energy-effi cient compressors with sound blankets• Horizontal supply and return are easily convertible to down-discharge airfl ow• Factory-installed base rails provide strength, easier handling, air circulation
under the unit and lifting-lug holes for rooftop installations• Heavy-gauge, zinc-coated steel cabinet with appliance-quality powder-
paint fi nish• Attractive, two-tone gray exterior• Permanently lubricated outdoor fan motor with vertical air discharge helps
ensure quiet operation• Positive-fl ow condensate drain pan (external trap supplied with unit)• Bottom, side and back electrical connections; fl exible set-up for left- or right-
side wiring• Round duct connections with 3” collars or fl ange connection for
16” x 16” ductwork• UL and CUL listed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program
Model
Nominal Cooling
Capacity (BTUH)
Nominal Heating
Capacity (BTUH @ 47 °F)
Electric Heat Capacity
(kW)
NominalCooling
CFM@ 0.5” ESP
Voltage-Phase
Maximum Overcurrent Protection
(amps)
DimensionsW x D x H
Shipping Weight
(pounds)
PHB24C02F1 25,000 23,800 5, 7, 10, 15, 20 800 208/230-1 25 47⅛” x 37⅛” x 30½” 306
PHB30C02F1 29,600 28,000 5, 7, 10, 15, 20 1,000 208/230-1 30 47⅛” x 37⅛” x 30½” 318
PHB36C02F1 35,400 35,400 5, 7, 10, 15, 20 1,200 208/230-1 35 47⅛” x 37⅛” x 30½” 327
PHB42C02F1 41,000 40,500 5, 7, 10, 15, 20 1,400 208/230-1 45 47⅛” x 37⅛” x 36½” 375
PHB48C02F1 47,500 47,000 5, 7, 10, 15, 20 1,600 208/230-1 50 47⅛” x 37⅛” x 36½” 378
PHB60C02F1 57,000 57,000 5, 7, 10, 15, 20 2,000 208/230-1 60 47⅛” x 37⅛” x 36½” 383
LIMITED WARRANTY• 5-Year—Compressor• 5-Year—Parts
Pack
aged
Hea
t Pum
ps
32
PHK Commercial Packaged Heat Pump
The Amana™ brand PHK Commercial Packaged Heat Pump features energy-effi cient cooling and heating. This self-contained unit allows for a ground-level or rooftop application. The fully insulated air handling compartment has convenient access panels, and its base pan elevates the unit above the slab. The PHK’s exterior has a powder-paint fi nish.
• Energy-effi cient compressor with internal relief valve• Copper tube/aluminum fi n coil• High-static, multi-speed evaporator blower motor• Totally enclosed, permanently lubricated condenser fan motor• Quiet top condenser discharge• Fully charged R-22 system• Bi-fl ow liquid line fi lter drier• Suction line accumulator• Check fl owrater expansion device• Crankcase heater• Heavy-gauge, zinc-coated steel cabinet with appliance-quality powder-
paint fi nish• Attractive Architectural Gray exterior• Fully insulated air handling compartment has convenient access panels
Model
Nominal Cooling Capacity (BTUH)
Nominal Heating
Capacity (BTUH @ 47 °F)
Electric Heat Capacity
(kW)
NominalCooling CFM
@ 0.5” ESPHigh/Low
Voltage-Phase
Maximum Overcurrent Protection
(amps)
DimensionsW x D x H
Shipping Weight
(pounds)
PHK036-3B 35,000 33,400 5, 8, 10, 15, 20 1,520/1,225 208/230-3 20 63⅛” x 32⅛” x 29⅝” 365
PHK048-3B 47,000 44,400 5, 8, 10, 15, 20 1,695/1,490 208/230-3 30 63⅛” x 32⅛” x 34⅝” 410
PHK060-3B 55,000 55,000 5, 8, 10, 15, 20 2,220/1,970 208/230-3 40 63⅛” x 32⅛” x 34⅝” 415
LIMITED WARRANTY• 5-Year—Compressor• 5-Year—Parts
Packaged Gas/Electric
33
PGD Packaged Gas/Electric—13 SEER/80% AFUE
The Amana® brand PGD 13 SEER Packaged Gas/Electric Unit offers outstanding year-round heating and cooling comfort. Featuring high-effi ciency compressors, you will enjoy lower power bills throughout the life of the system. The PGD is ideal for ground-level or rooftop applications and is approved for manufactured or modular homes. In addition to a fully insulated cabinet, the exterior is constructed of painted sheet metal that offers a high-quality, UV-resistant powder-paint fi nish.
• High-effi ciency Copeland® scroll compressors• Quiet, effi cient, permanently lubricated indoor blower motor• Easy conversion from horizontal to vertical airfl ow• Patented, heavy-duty Million-Air™ stainless-steel heat exchanger for maximum
effi ciency*• Inshot burners with induced draft combustion• Convertible to propane gas• Heavy-gauge, zinc-coated steel cabinet with appliance-quality powder-
paint fi nish• Attractive, two-tone gray exterior• Internal condensate trap• Gas and electric controls on same side of unit• CSA certifi ed• Performance ratings certifi ed in accordance with the ARI Unitary Air
Conditioning certifi cation program• California Low NOx approved
Model
NominalCooling
Capacity(BTUH)
Nominal Heating
Capacity(BTUH)
NominalCooling
CFM
Voltage-Phase
Maximum Overcurrent
Protection Fuse/HACR Breaker
(amps)
DimensionsW x D x H
Shipping Weight
(pounds)
PGD24C0452G 25,000 46,000 800 208/230-1 25 47⅛” x 49¼” x 30½” 389
PGD24C0702G 25,000 69,000 800 208/230-1 25 47⅛” x 49¼” x 30½” 395
PGD30C0702G 29,000 69,000 1,000 208/230-1 30 47⅛” x 49¼” x 30½” 395
PGD30C0902G 29,000 92,000 1,000 208/230-1 30 47⅛” x 49¼” x 30½” 401
PGD36C0702G 35,800 69,000 1,200 208/230-1 30 47⅛” x 49¼” x 30½” 428
PGD36C0902G 35,800 92,000 1,200 208/230-1 30 47⅛” x 49¼” x 30½” 434
PGD42C0902G 41,000 92,000 1,400 208/230-1 40 47⅛” x 49¼” x 30½” 434
PGD48C0902G 47,000 92,000 1,600 208/230-1 45 47⅛” x 49¼” x 36½” 441
PGD48C1152G 47,000 115,000 1,600 208/230-1 45 47⅛” x 49¼” x 36½” 447
LIMITED WARRANTY• Lifetime—Heat Exchanger• Lifetime—Compressor• 10-Year—Parts
* See page 18 for further explanation
Pack
aged
Gas
/Ele
ctric
34
APG12 Packaged Gas/Electric—12 SEER/80% AFUE
LIMITED WARRANTY• Lifetime—Heat Exchanger• 10-Year—Compressor• 10-Year—Parts
The Amana® brand APG12 12 SEER Packaged Gas/Electric Unit features high-effi ciency cooling and heating. This 12 SEER unit is ideal for ground-level or rooftop applications and is approved for manufactured or modular homes. In addition to a fully insulated cabinet, the exterior is constructed of painted sheet metal that offers a high-quality, UV-resistant powder-paint fi nish.
Model
NominalCooling
Capacity(BTUH)
Nominal Heating
Capacity(BTUH)
NominalCooling
CFM
Voltage-Phase
Maximum Overcurrent
Protection Fuse/HACR Breaker (amps)
DimensionsW x D x H
Shipping Weight
(pounds)
APG12240451A 24,000 46,000 800 208-230/1 20 47” x 51” x 27” 393
APG12240701A 24,000 69,000 800 208-230/1 20 47” x 51” x 27” 398
APG12300701A 29,000 69,000 1,000 208-230/1 30 47” x 51” x 27” 404
APG12360701A 35,800 69,000 1,250 208-230/1 30 47” x 51” x 32” 446
APG12360901A 35,800 92,000 1,250 208-230/1 30 47” x 51” x 32” 451
APG12420701A 40,600 69,000 1,400 208-230/1 40 47” x 51” x 32” 479
APG12420901A 40,600 92,000 1,400 208-230/1 40 47” x 51” x 32” 484
APG12480901A 47,000 92,000 1,525 208-230/1 40 47” x 51” x 40” 540
APG12481151A 47,000 115,000 1,525 208-230/1 40 47” x 51” x 40” 547
APG12600901A 55,000 92,000 1,900 208-230/1 50 47” x 51” x 40” 550
APG12601151A 55,000 115,000 1,900 208-230/1 50 47” x 51” x 40” 557
• High-effi ciency compressor• Compressor grommets for vibration isolation• Copper tube/aluminum fi n coils • Liquid line fi lter drier • Fully charged R-22 system • Patented, heavy-duty Million-Air™ stainless-steel heat exchanger for
maximum effi ciency* • Redundant gas valve, natural gas and easy conversion to propane • Power-assisted combustion • Direct spark ignition system, which includes a microprocessor-based control
for the entire ignition sequence, all blower operation and all safety circuits complete with self-diagnostics
• All APG12 models fi t in a standard-size pick-up truck (47” wide) • Horizontal or downfl ow application • One roof curb fi ts all units • Convenient access panels • Heavy-gauge, zinc-coated steel cabinet with appliance-quality powder-
paint fi nish• Attractive, two-tone gray exterior• Fully insulated cabinet • Bottom, 2” high base rails for easier handling • California Low NOx approved
* See page 18 for further explanation
Packaged Gas/Electric
35
APG10 Packaged Gas/Electric—10 SEER/80% AFUE
Model
Nominal Cooling
Capacity (BTUH)
Nominal Heating
Capacity (BTUH)
NominalCooling
CFM
Voltage-Phase
Maximum Overcurrent
Protection Fuse/HACR Breaker
(amps)
DimensionsW x D x H
Shipping Weight
(pounds)
APG10240451A 24,000 46,000 850 208/230-1 20 47” x 51” x 27” 386APG10240701A 24,000 69,000 850 208/230-1 20 47” x 51” x 27” 391APG10300701A 29,600 69,000 1,050 208/230-1 30 47” x 51” x 32” 397APG10360701A 35,200 69,000 1,250 208/230-1 30 47” x 51” x 32” 445APG10360901A 35,200 92,000 1,250 208/230-1 30 47” x 51” x 32” 450APG10420701A 40,000 69,000 1,430 208/230-1 40 47” x 51” x 32” 459APG10420901A 40,000 92,000 1,430 208/230-1 40 47” x 51” x 32” 464APG10480901A 47,000 92,000 1,530 208/230-1 50 47” x 51” x 40” 518APG10481151A 47,000 115,000 1,530 208/230-1 50 47” x 51” x 40” 525APG10600901A 56,000 92,000 1,950 208/230-1 60 47” x 51” x 40” 534APG10601401A 56,000 138,000 1,950 208/230-1 60 47” x 51” x 40” 548
LIMITED WARRANTY• 20-Year—Heat Exchanger• 5-Year—Compressor• 5-Year—Parts
The Amana® brand APG10 10 SEER Packaged Gas/Electric Unit features energy-effi cient cooling and heating. This 10 SEER unit is ideal for ground-level or rooftop applications and is approved for manufactured or modular homes. In addition to a fully insulated cabinet, the exterior is constructed of painted sheet metal that offers a high-quality, UV-resistant powder-paint fi nish.
• Energy-effi cient compressor• Compressor grommets for vibration isolation• Copper tube/aluminum fi n coil• Liquid line fi lter drier• Fully charged R-22 system• Durable, corrosion-resistant aluminized-steel tubular heat exchanger• Redundant gas valve, natural gas and easy conversion to propane• Power-assisted combustion• Direct spark ignition system, which includes a microprocessor-based control
for the entire ignition sequence, all blower operation and all safety circuits complete with self-diagnostics
• Horizontal or downfl ow application• One roof curb fi ts all units• Convenient access panels• Heavy-gauge, zinc-coated steel cabinet with appliance-quality powder-
paint fi nish• Attractive, two-tone gray exterior• Fully insulated cabinet• Bottom, 2” high base rails for easier handling• California Low NOx approved
Pack
aged
Gas
/Ele
ctric
36
GPG Commercial Packaged Gas/Electric—3- to 5-Ton, 3-Phase
LIMITED WARRANTY• 20-Year—Heat Exchanger• 5-Year—Compressor• 5-Year—Parts
The Amana® brand GPG Packaged Gas/Electric Unit features energy-effi cient cooling and heating. This unit is ideal for ground-level or rooftop applications. In addition to a fully insulated cabinet, the exterior is constructed of painted sheet metal that offers a high-quality, UV-resistant powder-paint fi nish and features base rails with fork slots for convenient handling and added rigidity.
• Energy-effi cient compressor• Compressor grommets for vibration isolation• Copper tube/aluminum fi n coil• Liquid line fi lter drier• Fully charged R-22 system• Durable, corrosion-resistant aluminized-steel tubular heat exchanger• Redundant gas valve, natural gas and easy conversion to propane• Power-assisted combustion• Direct spark ignition system, which includes a microprocessor-based control
for the entire ignition sequence, all blower operation and all safety circuits complete with self-diagnostics
• All GPG10 models fi t in a standard-size pick-up truck (47” wide)• Horizontal or downfl ow application• One roof curb fi ts all units• Convenient access panels• Heavy-gauge, zinc-coated steel cabinet with appliance-quality powder-
paint fi nish• Attractive Architectural Gray exterior• Fully insulated• Bottom, 2” high base rails for easier handling• California Low NOx approved
Model
Nominal Cooling
Capacity (BTUH)
Nominal Heating
Capacity (BTUH)
NominalCooling
CFM
Voltage-Phase
Maximum Overcurrent
Protection Fuse/HACR Breaker
(amps)
DimensionsW x D x H
Shipping Weight
(pounds)
GPG10360903A 35,200 92,000 1,250 208/230-3 20 47” x 51” x 32” 500GPG10480903A 47,000 92,000 1,530 208/230-3 30 47” x 51” x 40” 518GPG10600903A 56,000 92,000 1,950 208/230-3 40 47” x 51” x 40” 534GPG10601403A 56,000 138,000 1,950 208/230-3 40 47” x 51” x 40” 548
Packaged Gas/Electric
37
PGC Commercial Packaged Gas/Electric
Model
Nominal Cooling
Capacity (BTUH)
Nominal Heating
Capacity (BTUH)
NominalCooling
CFM
Voltage-Phase
Maximum Overcurrent
Protection Fuse/HACR Breaker
(amps)
DimensionsW x D x H
Shipping Weight
(pounds)
PGC090195-3A 86,000 133,000 3,000 208/230-3 60 74½” x 74½” x 36” 1,100
PGC120225-3A 116,000 153,000 3,800 208/230-3 70 74½” x 74½” x 52” 1,400
PGC090195-4A 86,000 133,000 3,000 460-3 30 74½” x 74½” x 36” 1,100
PGC120225-4A 116,000 153,000 3,800 460-3 35 74½” x 74½” x 52” 1,400
• Dual high-effi ciency scroll compressors with internal motor protection(2-stage cooling)
• Compressor grommets for vibration isolation• Time delay for compressors’ sequence• Fully charged R-22 systems• High- and low-pressure controls on all systems• Mild ambient switch• Two independent condenser coils for 2-stage operation• Totally enclosed, permanently lubricated outdoor fan motors• Vertical discharge with removable grilles provides easy access to fans
and motors• Enhanced copper tube/aluminum fi n coil• Expansion valve evaporator coil• Galvanized steel, powder-coated drain pan with ¾” NPT
condensate connection• Belt-driven, variable-pitch sheave permits multi-speed adjustment• Centrifugal fan for quiet and effi cient operation• Reliable 2-stage heating• Combination redundant gas valve and regulator• Heavy-gauge, aluminized-steel tubular heat exchanger cells• Power-assisted combustion• Integrated DSI Ignition Control• Heavy-gauge, zinc-coated steel cabinet with appliance-quality powder-
paint fi nish• Attractive, two-tone gray exterior• Built-in fi lter rack holds 2” disposable fi lters (fi lters included)• Control box and compressors accessible from side access panels• Factory wiring conveniently arranged to install accessories• ASHRAE 90.1 approved
The Amana® brand PGC Commercial Packaged Gas/Electric Unit features energy-effi cient cooling and heating. This unit is ideal for ground-level or rooftop applications. The PGC Commercial unit is housed in a heavy-gauge, zinc-coated steel cabinet with a weather-resistant powder-paint fi nish.
LIMITED WARRANTY• 5-Year—Heat Exchanger• 5-Year—Compressor• 5-Year—Parts
Coi
ls
38
The Amana® brand CAUF Uncased Upfl ow/Downfl ow Indoor Coils are made for split system air conditioners and heat pumps.
• Rust-proof, high-temperature, thermoplastic drain pans feature a low water retention design
• Available with check fl owrater expansion device for heat pump or cooling-only applications
• Rifl ed copper tubing and wave-pattern aluminum fi n coil construction• The ‘4’ in the next-to-the-last character in the nomenclature indicates coils for
use with refrigerant R-410A
CAUF Uncased Upflow/Downflow Indoor Coil
LIMITED WARRANTY• Assumes the parts warranty of
the matched Amana® brand remote unit
• 5-Year—Parts
* Revision designator
ModelDimensions Specifi cations
Width Height Nominal Tons No. of Rows Liquid Connection
Suction Connection
Shipping Weight (pounds)
CAUF018A2* 13” 16¼” 1½ 2 3/8” 5/8” 18CAUF024A2* 13” 16⅛” 2 2 3/8” 3/4” 21CAUF030A2* 13” 18⅛” 2½ 3 3/8” 3/4” 24CAUF036A2A 13” 20” 3 3 3/8” 3/4” 31CAUF036A2B 13” 20” 3 2 3/8” 3/4” 30CAUF018B2* 16½” 16⅛” 1½ 2 3/8” 5/8” 18CAUF025B2* 16½” 16¼” 2 3 3/8” 3/4” 21CAUF030B2* 16½” 16⅛” 2½ 3 3/8” 3/4” 24CAUF030B4* 16½” 20” 2½ 3 3/8” 3/4” 31CAUF036B2A 16½” 20” 3 3 3/8” 3/4” 31CAUF036B2B 16½” 20” 3 2 3/8” 3/4” 31CAUF036B4* 16½” 1915/16” 3 3 3/8” 3/4” 43CAUF036C2* 20” 20” 3 2 3/8” 3/4” 34CAUF037B2* 16½” 20” 3 3 3/8” 3/4” 31CAUF037C2A 20” 18” 3 3 3/8” 3/4” 43CAUF042B2* 16½” 1915/16” 3½ 3 3/8” 3/4” 43CAUF048B2* 16½” 2315/16” 4 3 3/8” 7/8” 44CAUF042C2* 20” 217/16” 3½ 3 3/8” 3/4” 43CAUF042C4* 20” 23¾” 3½ 3 3/8” 7/8” 44CAUF048C2* 20” 23½” 4 3 3/8” 7/8” 44CAUF048C4* 20” 23½” 4 3 3/8” 7/8” 44CAUF049C2* 20” 23¾” 4 3 3/8” 7/8” 44CAUF060C2* 20” 2715/16” 5 3 3/8” 7/8” 55CAUF061C2* 20” 2715/16” 5 4 3/8” 7/8” 55CAUF049D2* 23” 23¾” 4 3 3/8” 7/8” 44CAUF057D4* 23” 28¼” 5 3 3/8” 7/8” 55CAUF060D2* 23” 28¼” 5 3 3/8” 7/8” 55CAUF060D4* 23” 27¾” 5 4 3/8” 7/8” 60CAUF061D2* 23” 27¾” 5 4 3/8” 7/8” 60
Coils
39
CAPF Cased Upflow/Downflow Indoor Coil
The Amana® brand CAPF Cased Upfl ow/Downfl ow Indoor Coils are made for split system air conditioners and heat pumps. This coil is painted in Architectural Gray.
• Rust-proof, high-temperature, thermoplastic drain pans feature a low water retention design
• Available with check fl owrater expansion device for heat pump or cooling-only applications
• Rifl ed copper tubing and wave-pattern aluminum fi n coils• Foil-face insulation• High-quality post-paint cabinet• Split-seam front–excellent access• The ‘4’ in the next-to-the-last character in the nomenclature indicates coils for
use with refrigerant R-410A
LIMITED WARRANTY• Assumes the parts warranty of
the matched Amana® brand remote unit
• 5-Year—Parts
* Revision designator
ModelDimensions Specifi cations
Width HeightPlenum
Opening Width
Nominal Tons No. of Rows Liquid Connection
Suction Connection
Shipping Weight
(pounds)CAPF018A2* 14” 18” 13” 1½ 2 3/8” 5/8” 31CAPF018B2* 17½” 18” 16½” 1½ 2 3/8” 5/8” 33CAPF024A2* 14” 18” 13” 2 2 3/8” 3/4” 33CAPF025B2* 17½” 18” 16½” 2 3 3/8” 3/4” 35CAPF030A2* 14” 18” 13” 2½ 3 3/8” 3/4” 38CAPF030B2* 17½” 18” 16½” 2½ 3 3/8” 3/4” 42CAPF030B4* 17½” 22” 16½” 2½ 3 3/8” 3/4” 48CAPF036A2* 14” 22” 13” 3 2 3/8” 3/4” 38CAPF036B2A 17½” 22” 16½” 3 3 3/8” 3/4” 48
CAPF036B2B/C 17½” 22” 16½” 3 2 3/8” 3/4” 48CAPF036B4* 17½” 22” 16½” 3 3 3/8” 3/4” 60CAPF036C2A 21” 26” 20 3 3 3/8” 3/4” 55
CAPF036C2B/C 21” 26” 20 3 2 3/8” 3/4” 55CAPF037B2* 17½” 22” 16½” 3 3 3/8” 3/4” 48CAPF037C2A 21” 26’ 20 3 3 3/8” 3/4” 65CAPF042B2* 17½” 22” 16½” 3½ 3 3/8” 3/4” 60CAPF042C2* 21” 26” 20 3½ 3 3/8” 3/4” 65CAPF042C4* 21” 26” 20 3½ 3 3/8” 7/8” 57CAPF048B2* 17½” 22” 16½” 4 3 3/8” 7/8” 55CAPF048C2A 21” 26” 20 4 3 3/8” 7/8” 65CAPF048C4* 21” 26” 20 4 3 3/8” 7/8” 65CAPF049C2* 21” 26” 20 4 3 3/8” 7/8” 57CAPF049D2* 24½” 26” 23½” 4 3 3/8” 7/8” 58CAPF057D4* 24½” 30” 23½” 5 3 3/8” 7/8” 68CAPF060C2* 21” 30” 20 5 3 3/8” 7/8” 61CAPF060D2* 24½” 30” 23½” 5 3 3/8” 7/8” 68CAPF060D4* 24½” 30” 23½” 5 4 3/8” 7/8” 75CAPF061C2* 21” 30” 20 5 4 3/8” 7/8” 68CAPF061D2* 24½” 30” 23½” 5 4 3/8” 7/8” 75
Coi
ls
40
The Amana® brand CHPF Cased Horizontal “A” Coils are made for split system air conditioners and heat pumps. Each coil is made of quality galvanized-steel with a painted, leather-grain fi nish. This coil is painted in Architectural Gray.
• Rust-proof, high-temperature, thermoplastic drain pans feature a low water retention design
• Available with check fl owrater expansion device for heat pump or cooling-only applications
• Rifl ed copper tubing and wave-pattern aluminum fi n coils• Foil-faced insulation• High-quality post-paint cabinet• Split-seam front–excellent access• The ‘4’ in the next-to-the-last character in the nomenclature indicates coils for
use with refrigerant R-410A
CHPF Cased Horizontal “A” Coil
LIMITED WARRANTY• Assumes the parts warranty of
the matched Amana® brand remote unit
• 5-Year—Parts
* Revision designator
Model
Dimensions Specifi cations
Width Depth HeightPlenum
Opening Width
Plenum Opening
Height
Evap Coil Face
Area (ft2)
No. of Rows
Fins Per
Inch
Primary Auxiliary
Drain
Liquid Connection
Suction Connection
Shipping Weight
(pounds)CHPF024A2* 21⅛” 26” 14” 19” 13” 3.33 2 14 3/4” 3/8” 3/4” 40CHPF025B2* 21⅛” 26” 17½” 19” 16½” 3.56 2 14 3/4” 3/8” 3/4” 48CHPF030A2* 21⅛” 26” 14” 19” 13” 3.33 3 14 3/4” 3/8” 3/4” 45CHPF030A4* 21⅛” 26” 14” 19” 13” 3.33 3 14 3/4” 3/8” 3/4” 45CHPF036B2* 21⅛” 26” 17½” 19” 16½” 4.44 2 14 3/4” 3/8” 3/4” 50CHPF036B4* 21⅛” 26” 17½” 19” 16½” 4.44 3 14 3/4” 3/8” 3/4” 55CHPF042B2* 21⅛” 26” 17½” 19” 16½” 4.44 3 14 3/4” 3/8” 3/4” 55CHPF048C2* 21⅛” 26” 21” 19” 20” 4.88 3 14 3/4” 3/8” 7/8” 60CHPF048D2* 21⅛” 26” 24½” 19” 23½” 5.96 3 14 3/4” 3/8” 7/8” 65CHPF048D4* 21⅛” 26” 24½” 19” 23½” 5.96 3 14 3/4” 3/8” 7/8” 65CHPF060D2* 21⅛” 26” 24½” 19” 23½” 5.96 4 14 3/4” 3/8” 7/8” 70CHPF060D4* 21⅛” 26” 24½” 19” 23½” 5.96 4 14 3/4” 3/8” 7/8” 70
Coils
41
Horizontal Slab Coil
The Amana® brand Horizontal Slab Coils provide solid value and allow fl exible installation options in tight areas with maximum corrosion- and rust-resistance. Copper tubing, aluminum fi ns and an insulated cabinet maximize energy effi ciency. Amana® brand coils are produced to strict tolerances to operate as a system along with Amana® brand outdoor air conditioners and heat pumps.
• All-plastic drain pan—sloped for draining—eliminates rust and corrosion and will not promote bacterial growth
• Horizontal left or horizontal right installations • CHH models include 1” insulation and a factory-installed TXV• CCH and CH models include factory-installed, fi xed-orifi ce expansion device ► Easy conversion to TXV expansion device with proper kit; no brazing
is required• Suitable for both cooling and heat pump applications• High-quality rifl ed copper tubing improves capacity and performance• Enhanced aluminum fi ns for exceptional heat transfer• Factory leak-tested twice to help ensure system integrity• Shipped with dry nitrogen holding charge• Foil-face, moisture-resistant cabinet insulation• Painted, 22-gauge steel cases• Duct adapters included to allow easy mounting to furnaces and ductwork• UL and CUL listed
Model DimensionsW x D x H
Service ValveLiquid Suction
R-22 CCH Horizontal Slab Coils Equipped with Flowrater Expansion Devices
CCH24FCD 30½” x 9⅛” x 21½” 3/8” 5/8”
CCH30FCD 30½” x 9⅛” x 21½” 3/8” 3/4”
CCH36FCD 30½” x 9⅛” x 21½” 3/8” 3/4”
CCH48FCD 34½” x 9⅛” x 25½” 3/8” 7/8”
CCH60FCD 34½” x 9⅛” x 25½” 3/8” 7/8”
R-22 CHH Horizontal Slab Coils Equipped with TXV Expansion Devices
CHH24TCD 30½” x 9⅛” x 21½” 3/8” 5/8”
CHH30TCD 30½” x 9⅛” x 21½” 3/8” 3/4”
CHH36TCD 30½” x 9⅛” x 21½” 3/8” 3/4”
CHH48TCD 34½” x 9⅛” x 25½” 3/8” 7/8”
CHH60TCD 34½” x 9⅛” x 25½” 3/8” 7/8”
R-410A CH Horizontal Slab Coils Equipped with Flowrater Expansion Devices
CH36FCB 30½” x 9⅛” x 21½” 3/8” 3/4”
CH48FCB 34½” x 9⅛” x 25½” 3/8” 7/8”
CH60FCB 34½” x 9⅛” x 25½” 3/8” 7/8”
LIMITED WARRANTY• Assumes the parts warranty
of the matched Amana® brand remote unit
• 5-Year—Parts
Air H
andl
ers
42
AEPT Multi-Position, Variable-Speed Air Handler
The Amana® brand AEPT Multi-Position, Variable-Speed Air Handler features a factory-installed, internally mounted TXV, a rust-resistant galvanized leather-grain embossed fi nish with a fully painted and insulated cabinet. This unit’s blower motor allows for a soft start and stop for quieter, more effi cient operation and eliminates the cold blast of air upon heating startup. Utilizing an Electronically Commutated Motor™, this air handler is ideal for new or retrofi t applications.
• Factory-installed, internally mounted TXV• Fully painted cabinet• Built-in coil has horizontal, vertical and downfl ow drain pans with
secondary connections• Compact, versatile upfl ow, downfl ow or horizontal multi-position installations• Low-voltage cabinet connections; control circuit is arranged to permit staging• Compatible with heat pumps and variable-capacity cooling applications• Provides constant CFM over a wide range of static pressure conditions
independent of duct system; provides low CFM for effi cient fan-only operation• Improved humidity control and comfort• Up to 14 airfl ow settings can be adjusted to optimize the system CFM for each
individual mode of operation• Top entry for power supply; top or side low-voltage entry• Factory-sealed to achieve a 2% or less leakage rate at 1.0” water gauge
external duct static pressure• ETL certifi ed
Model
Nominal Cooling
Capacity (BTUH)
VoltageCFM
@ 0.3” ESP(High/Low)
Electric Heat Capacity
(kW)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
AEPT030-00C-1/-00C-1A 24,000-30,000 208/240 1,200/600 5, 8, 10 19½” x 22” x 46¾” 3/8” 3/4” 147
AEPT036-00C-1/-00C-1A 36,000 208/240 1,300/1,200 8, 10, 15 22” x 24” x 53¼” 3/8” 7/8” 176
AEPT060-00C-1/-00C-1A 48,000-60,000 208/240 2,000/1,400 10, 15, 20, 21 22” x 24” x 53¼” 3/8” 7/8” 195
LIMITED WARRANTY• Coil assumes the parts
warranty of the matched Amana® brand remote unit
• 5-Year—Parts
Air Handlers
43
MBE/MBR Modular Blowers
• MBR is a multi-speed blower—motor speed is easily changed• MBE has a variable-speed ECM blower motor• Cooling or heat pump applications: upfl ow, downfl ow and horizontal applications• MBR control board includes a fan delay in the cooling mode and is isolated
from the air stream• Durable cabinet constructed of formed and painted galvanized steel• HKR electric heat kits are available as a fi eld-installed accessory• Foil-face insulated cabinet helps reduce operating sound and possible
cabinet condensation• ETL certifi ed
Model Voltage-Phase
CFM @ 0.3” ESP(High/Medium/Low)
Electric Heat Capacity (kW)
DimensionsW x D x H
Shipping Weight (pounds)
MBE1200 208/230-1 1,200/600 8, 10, 15 17½” x 21” x 26” 72
MBE1600 208/230-1 1,600/1,200 10, 15 21” x 21” x 30” 82
MBE2000 208/230-1 2,000/1,200 10, 15, 20 24½” x 21” x 30” 94
MBR0800 208/230-1 910/720/500 3, 5, 6, 8, 10 17½” x 21” x 26” 72
MBR1200 208/230-1 1,100/1,060/940 3, 5, 6, 8, 10, 15, 20, 21 17½” x 21” x 26” 72
MBR1600 208/230-1 1,580/1,380/1,000 3, 5, 6, 8, 10, 15, 20, 21 21” x 21” x 30” 82
MBR2000 208/230-1 1,860/1,510/1,320 3, 5, 6, 8, 10, 15, 20, 21 24½” x 21” x 30” 94
LIMITED WARRANTY• 5-Year—Parts
The Amana® brand MBE/MBR Modular Blowers are tailor-made for exceptional energy effi ciency. These blowers are designed with quality components and assembled with excellent craftsmanship. When matched with our cased coils for upfl ow, downfl ow and horizontal applications, these two-piece blower coils increase both installation and application fl exibility.
Air H
andl
ers
44
ARPT Multi-Position Air Handler
The Amana® brand ARPT Multi-Position Air Handler features a factory-installed, internally mounted TXV and a fully insulated cabinet made of rust-resistant, galvanized, leather-grain-embossed steel. This air handler is ideal for new or retrofi t applications.
• Factory-installed, internally mounted TXV• Used with cooling and heat pump applications• Fully painted cabinet• ¾” cabinet insulation• Power supply entry at top; low-voltage entry on left side and top• Direct-drive, multi-speed motor allows air volume variation for heating/cooling• Transformer and blower time delay on all units• Built-in coil with horizontal and vertical thermoplastic drain pans and
secondary drains• Copper tube/aluminum fi n coil• Built-in fi lter rack for 1” fi lter (fi lter not included)• 3 kW - 20 kW electric heat kits are available as a fi eld-installed accessory• Factory-sealed to achieve a 2% or less leakage rate at 1.0” water gauge
external duct static pressure• ETL certifi ed
Model
Nominal Cooling Capacity (BTUH)
VoltageCFM
@ 0.3” ESP (High/Low)
Electric Heat Capacity (kW)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
ARPT024-00C-1/-00C-1A 24,000 208/240 978/880 3, 5, 6, 8, 10 15½” x 22” x 41⅛” 3/8” 3/4” 106
ARPT032-00C-1/-00C-1A 30,000 208/240 1,040/980 3, 5, 6, 8, 10, 15 15½” x 22” x 41⅛” 3/8” 3/4” 120
ARPT036-00C-1/-00C-1A 36,000 208/240 1,420/1,280 3, 5, 6, 8, 10, 15 , 20 19½” x 22” x 46¾” 3/8” 3/4” 141
ARPT042-00C-1/-00C-1A 42,000 208/240 1,470/1,420 3, 5, 6, 8, 10, 15 , 20 19½” x 22” x 46¾” 3/8” 3/4” 144
ARPT049-00C-1/-00C-1A 48,000 208/240 1,530/1,470 3, 5, 6, 8, 10, 15 , 20 22” x 24” x 53¼” 3/8” 7/8” 173
ARPT061-00C-1/-00C-1A 60,000 208/240 2,000/1,780 3, 5, 6, 8, 10, 15 , 20 22” x 24” x 53¼” 3/8” 7/8” 192
LIMITED WARRANTY• Coil assumes the parts
warranty of the matched Amana® brand remote unit
• 5-Year—Parts
Air Handlers
45
ARUF Multi-Position Air Handler
The Amana® brand ARUF Multi-Position Air Handler is approved for modular homes. This unit features a fully insulated steel cabinet with rust-resistant, galvanized, leather-grain-embossed fi nish and painted front panels. This air handler is ideal for new or retrofi t applications.
• Fully insulated cabinet• Power supply entry at top; low-voltage entry on left side and top• Direct-drive, multi-speed motor allows air volume variation for heating/cooling• Transformer and blower time delay on all units• Equipped with a check fl owrater for cooling only and heat pump applications• Built-in coil with horizontal and vertical thermoplastic drain pans and
secondary drains• Copper tube/aluminum fi n coil• Built-in fi lter rack for 1” fi lter (fi lter not included)• 3 kW - 20 kW electric heat kits are available as a fi eld-installed accessory• ETL certifi ed
Model
Nominal Cooling
Capacity (BTUH)
VoltageCFM
@ 0.3” ESP High/Low
Electric Heat Capacity (kW)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
ARUF018-00A-1/1A 18,000 208/240 580/550 3, 5 ,6, 8 15½” x 22” x 41⅛” 3/8” 5/8” 105
ARUF024-00A-1/1A 24,000 208/240 980/880 3, 5, 6, 8, 10 15½” x 22” x 41⅛” 3/8” 3/4” 106
ARUF030-00A-1/1A 30,000 208/240 1,040/980 3, 5, 6, 8, 10, 15 15½” x 22” x 41⅛” 3/8” 3/4” 113
ARUF032-00A-1/1A 30,000 208/240 1,040/980 3, 5, 6, 8, 10, 15 15½” x 22” x 41⅛” 3/8” 3/4” 120
ARUF036-00A-1/1A 36,000 208/240 1,420/1,280 3, 5, 6, 8, 10, 15, 20 19½” x 22” x 46¾” 3/8” 3/4” 141
ARUF042-00A-1/1A 42,000 208/240 1,470/1,420 3, 5, 6, 8, 10, 15, 20 19½” x 22” x 46¾” 3/8” 3/4” 144
ARUF048-00A-1/1A 48,000 208/240 1,530/1,470 3, 5, 6, 8, 10, 15, 20 22” x 24” x 53¼” 3/8” 7/8” 173
ARUF049-00A-1/1A 48,000 208/240 1,530/1,470 3, 5, 6, 8, 10, 15, 20 22” x 24” x 53¼” 3/8” 7/8” 173
ARUF060-00A-1/1A 60,000 208/240 2,000/1,780 3, 5, 6, 8, 10, 15, 20 22” x 24” x 53¼” 3/8” 7/8” 192
ARUF061-00A-1/1A 60,000 208/240 2,000/1,780 3, 5, 6, 8, 10, 15, 20 22” x 24” x 53¼” 3/8” 7/8” 192
LIMITED WARRANTY• Coil assumes the parts
warranty of the matched Amana® brand remote unit
• 5-Year—Parts
Air H
andl
ers
46
AR Commercial Multi-Position Air Handler
The Amana® brand AR Commercial Multi-Position Air Handler offers installation for upfl ow or horizontal positions in cooling only or heat pump applications. The 10-ton model is circuited for use with two 4- or 5-ton or one 10-ton outdoor cooling only or heat pump system(s). For indoor applications, all models are convertible to 460-3-60 from 208/230-3-60. The heavy-gauge, reinforced G-90 galvanized steel cabinet with removable access panels makes servicing the unit faster and easier. The cabinet is insulated with a fi berglass blanket. This air handler is ideal for new or retrofi t applications.
• Blower relay and transformer• TXV control; 10-ton unit has 2 TXVs• Draw-thru centrifugal blower is belt-driven for quiet, effi cient operation• Horizontal and vertical condensate pans• Copper tube/aluminum fi n coil• Entry on top of panel for both low and high voltage• Built-in fi lter rack for 2” fi lter (fi lter included)• External accessory electric heat kits available in 15, 20 and 30 kW• Heat pump-ready
LIMITED WARRANTY• Coil assumes the parts
warranty of the matched Amana® brand remote unit
• 5-Year—Parts
Model Nominal Cooling Capacity (BTUH)
Voltage-Phase
CFM@ 0.3” ESP High/Low
Electric Heat Capacity
(kW)
DimensionsW x D x H
Service Valve Shipping Weight
(pounds)Liquid Suction
AR090 90,000 208/230/460-3 3,000 15, 20, 30 48⅛” x 24” x 60½” 5/8” 1⅜” 405
AR120 120,000 208/230/460-3 4,000 15, 20, 30 48⅛” x 24” x 60½” 3/8” * 1⅜” * 430
* For 2 refrigerant lines.
Quietflex
®—Flex D
uct
47
“Rip-Stop” Silver Jacket
Series R-ValueDiameter
3” 4” 5” 6” 7” 8” 9” 10” 12” 14” 16” 18” 20” 22”40 4.2 X X X X X X X X X X X X X X
80 6.0 X X X X X X X X X X X X X X
85 8.0 X X X X X X X X X X X X X X
Quietfl ex Customer Service: (877) 694-3669
The Quietfl ex® “Rip-Stop” Silver Jacket Flex Duct has a metallic, polyester-vapor barrier with a special “rip-stop” scrim reinforcement. Standard diameters are available in 3” to 22” with 25’ per bag.
• Bags require 20% less warehouse space• Weather-resistant• Easy to carry: up to 10” strapped together to form pairs• 50’ lengths available• Quick cleanup and easy disposal• Temperature range is -20 °F to 200 °F intermittent• Oversized core to fi t on collars and register boxes• Most federal, state and local codes and standards• Also available in boxes• Meets UL Standard 181• ASTM C-518 – Dynamic• HUD/FHA standards 515.2.1 Paragraph B• NFPA standards 90A and 90B
LIMITED WARRANTY• 5-Year
Qui
etfle
x®
—Fl
ex D
uct
48
Series R-ValueDiameter
4” 5” 6” 7” 8” 9” 10” 12” 14” 16” 18” 20”
20 4.2 X X X X X X X X X X X X
60 6.0 X X X X X X X X X X X X
65 8.0 X X X X X X X X X X X X
UV-Inhibited Black Jacket
• Bags require 20% less warehouse space• Weather-resistant• Easy to carry: up to 10” strapped together to form pairs• Quick cleanup and easy disposal• Temperature range is -20 °F to 200 °F intermittent• Oversized core to fi t on collars and register boxes• Most federal, state and local codes and standards• Also available in boxes• Meets UL Standard 181• ASTM C-518 – Dynamic• HUD/FHA standards 515.2.1 Paragraph B• NFPA standards 90A and 90B
The Quietfl ex® UV-Inhibited Black Jacket Flex Duct has a UV-inhibited polyethylene vapor barrier. Standard diameters are available in 4” to 20” with 25’ per bag.
LIMITED WARRANTY• 5-Year
Quietfl ex Customer Service: (877) 694-3669
Quietflex
®—Flex D
uct
49
Series R-ValueDiameter
10” 12” 14” 16” 18”
51 4.2 X X X X X
71 6.0 X X X X X
81 8.0 X X X X X
Mobile Home-Approved
• Bags require 20% less warehouse space• Weather-resistant• Up to 10” strapped together to form pairs• Quick cleanup and easy disposal• Temperature range is -20 °F to 200 °F intermittent• Oversized core to fi t on collars and register boxes• Most federal, state and local codes and standards• Also available in boxes• Meets UL Standard 181• ASTM C-518 – Dynamic• HUD/FHA standards 515.2.1 Paragraph B• NFPA standards 90A and 90B
The Quietfl ex® Mobile Home Flex Duct has an extra heavy-duty, UV-inhibited, polyethylene-vapor barrier and complies with HUD standards for outdoor use with mobile homes. Standard diameters include 10”, 12”, 14”, 16” and 18” with 25’ per bag.
LIMITED WARRANTY• 5-Year
Quietfl ex Customer Service: (877) 694-3669
Qui
etfle
x®
—Fl
ex D
uct
50
SeriesDiameter
3” 4” 5” 6” 7” 8” 9” 10” 12” 14”
06 X X X X X X X X X X
Uninsulated Flex Duct
• Bags require 20% less warehouse space• Weather-resistant• Quick cleanup and easy disposal• Temperature range is -20 °F to 200 °F intermittent• Oversized core to fi t on collars and register boxes• Most federal, state and local codes and standards• Also available in boxes• Meets UL Standard 181• ASTM C-518 – Dynamic• HUD/FHA standards 515.2.1 Paragraph B• NFPA standards 90A and 90B
The Quietfl ex® Metallic Uninsulated Flex Duct comes in four 25’ connectors per carton. Standard diameters are available in 3” to 14” with 100’ total.
LIMITED WARRANTY• 5-Year
Quietfl ex Customer Service: (877) 694-3669
51
Indoor Air Quality
51
* With All Standard Filters Installed
LIMITED WARRANTY• 5-Year
AHEPA/ADMHEPA Whole-House HEPA Air Cleaners
• Certifi ed true HEPA• Removes 99.97% of odors and air contaminants down to 0.3 microns (1/84,000
of an inch)• Heavy-gauge steel cabinet with powder-coat paint fi nish provides rigid
installation and durability and resists corrosion• Replacement fi lters available; see table below
The Amana® brand AHEPA/ADMHEPA Whole-House True HEPA Air Cleaners are designed to help protect and prolong the operating effi ciency of the heating and cooling equipment. The activated carbon pre-fi lter and the HEPA fi lter remove lint and unpleasant odors, atmospheric and household dust, coal dust, insecticides, dust mites, pollen, mold spores, fungi, bacteria, cooking smoke and grease, pet dander and tobacco smoke particles. While the AHEPA models are easily installed in a free-standing position, the ADMHEPA model has various installation options (duct-mounted, collar-mounted or free-standing).
Model Description
AHE
PA65
0
AHE
PA55
0
AHE
PA45
0
AHE
PA35
0
ADM
HEPA
400
W6-0840 True HEPA Filter Cylinder XW6-0855 Carbon Prefi lter Blanket XW6-0810 Inner Carbon VOC Blanket XW5-0860 True HEPA 6” Filter X
W5-0860-3 True HEPA Filter 6” Square XW5-0810 Carbon Prefi lter 1” XW5-0820 Carbon VOC After Filter XW5-0885 Carbon / Potass. VOC Filter XW4-0840 True HEPA Filter Cylinder XW4-0855 Carbon Prefi lter Blanket XW4-0810 Inner Carbon VOC Blanket XW3-0840 True HEPA Filter Cylinder XW3-0855 Carbon Prefi lter Blanket XW3-0810 Inner Carbon VOC Blanket X
DMH4-0400 True HEPA Filter XDMH4-0855 Pre-Filter XDMH4-0810 Carbon Pre-Filter X
Model CFM*Whole-House Air
Changes/Day Cabinet Dimensions(W x D x H)
Intake Duct
Fitting Diameter
Outfl ow Duct
Fitting Diameter
Outfl ow Duct Fitting Reversible Openings
Power Plug-in Power Cord
Weight (pounds)1,500 ft² 2,500 ft² Voltage Hz Watts
AHEPA350 245 30 18 18¼” x 18¼” x 19¼” 8” 6” 1 120 60 70 10’ 38AHEPA450 330 40 24 18” x 18” x 24½” 8” 6” 3 120 60 125 10’ 51AHEPA550 560 67 41 21½” x 20½” x 28” 12” 8” 2 120 60 215 10’ 88AHEPA650 540 65 39 18” x 18” x 30½” 12” 8” 2 120 60 215 10’ 57
ADMHEPA400 320 39 29 16¼” x 12¾” x 20⅛” 8” 8” 2 120 60 125 9’ 38
* Removes lint and odors** 99.97% effi cient on 0.3 micron*** For removal of noxious odors and gases
Model Carbon VOC Prefi lter* Certifi ed True HEPA Filter** Carbon VOC Filter***AHEPA350 2.45 ft² 65 ft²; 2-3 Long-Life Years 1.39 ft²; Inner VOC After Filter
AHEPA450 3.75 ft² 100 ft²; 2-4 Long-Life Years 2.13 ft²; Inner VOC After Filter
AHEPA550 6.3 ft² 180 ft²; 3-5 Long-Life Years 9.5 ft²; Carbon/Potassium Permanganate VOC After Filter
AHEPA650 5.1 ft² 133 ft²; 2-4 Long-Life Years 2.87 ft²; Inner VOC After Filter
ADMHEPA400 3.1 ft² (MERV 8) 40 ft²; 2-3 Long-Life Years 1.33 ft² Prefi lter
AHEPA Model
52
Indo
or A
ir Q
ualit
y
52
• Environmentally-friendly Lifetime Filtration System electronically removes lung-damaging air pollutants down to 0.01 micron (1/2,540,000 of an inch)
• Carbon fi lters remove odors• Dual indicator lights show unit operation at a glance• Electronic Air Proving Switch cycles the air cleaner On/Off with the
system fan• Includes dual indicator lights• Heavy-gauge galvanized steel cabinet provides trouble-free vertical
or horizontal installation• Durable powder-coat paint fi nish resists corrosion• Replacement fi lters available; see table below
Model House Size CFM Duct Size Dimensions(W x D x H)
Power Weight (pounds)Voltage Hz Watts
ASAS-10 < 2,400 ft² Up to 1,200 16” x 20” 21” x 7½” x 23¾” 120 60 30 28
ASAS-11 < 3,000 ft² Up to 1,400 16” x 25” 21” x 7½” x 26½” 120 60 30 30
ASAS-12 < 3,000 ft² Up to 1,400 20” x 20” 25.88” x 7½” x 21¾” 120 60 30 33
ASAS-18 > 3,000 ft² Up to 2,000 20” x 25” 25.88” x 7½” x 26½” 120 60 30 38
LIMITED WARRANTY• 5-Year
ASAS High-Efficiency Electronic Air Cleaner
The Amana® brand ASAS Whole-House, High-Effi ciency Electronic Air Cleaner is designed to remove air contaminants down to 0.01 microns (1/2,540,000 of an inch). The ASAS series helps protect and prolong the operating effi ciency of the heating and cooling equipment. An installed electronic air-proving switch automatically cycles the air cleaner on and off with the system fan. The air-proving switch detects airfl ow and energizes the air cleaner. With a 4-stage air cleaning process, pre-fi lters, charging section, grounding plates and carbon fi lters, the ASAS air cleaners effi ciently remove atmospheric and household dust, coal dust, insecticides, dust mites, pollen, mold spores, fungi, bacteria, cooking smoke and grease, pet dander and tobacco smoke particles.
Model Standard Features1156-3 Carbon Filters (set of 3) for ASAS-10/11
1856-3 Carbon Filters (set of 3) for ASAS-12/18
53
Indoor Air Quality
53
• Highest effi ciency in the industry for a 1” electronic air cleaner; fi ts into any one-inch fi lter opening
• Environmentally safe – does not produce hazardous ozone or positive ions• Engineered to operate quietly to create a cleaner, healthier environment• Fully electronic, reliable, high-effi ciency carbon-graphite center screen
removes particles as small as .001 microns and helps remove pollen, mold spores, animal dander, smoke and lung damaging dust
• Uses a small amount of electrical current and will not overload the system• Effi ciency increases as the air cleaner is operating• Designed to operate with constant power or with the system’s fan to permit
reliable, long-term performance• Easily removable, high-density, multi-layered replacement media pads
feature high dust-holding capacities and low-static pressure curves to provide optimum performance
• Easy to install, maintain and service• Fits all central HVAC residential systems• Notched, recessed and insulated center charging pin eliminates improves
transfer and performance and quieter operation• Stainless-steel latches provide durability• Corrosion-resistant construction for a thin, easy fi t and trouble-free installation• Open-face design maintains low static pressure• Independently tested and certifi ed• MERV-10 Rated Effi ciency (ASHRAE Standard 52.2)
LIMITED WARRANTY• 2-Year
A1EAC Charged-Media Electronic Air Cleaner
The Amana® brand A1EAC Charged-Media Electronic Air Cleaner provides a 24-volt, polarized charge on the media pads to capture and remove airborne particles as small as .001 microns. Contributing to the air cleaner’s reliable operation is its carbon-graphite center charging screen, which is permanently mounted to the air cleaner frame. Attached to each of the frame’s four corners, internal center screen spacers are open faced to maximize air fl ow. For added durability, a one-piece, injection-molded power head is “capped” and sealed to be watertight.
Model Pressure Drop @ 300 FPM (W.G.)
Power Dimensions Net / Shipping Weight (pounds)Voltage Ampacity Watts Width Depth Height
A1EAC-1224 .17” 24 .064 2 12” 1” 24” 2 / 3A1EAC-1420 .17” 24 .064 2 14” 1” 20” 2 / 3A1EAC-1424 .17” 24 .064 2 14” 1” 24” 2 / 3A1EAC-1425 .17” 24 .064 2 14” 1” 25” 2 / 3A1EAC-1430 .17” 24 .064 2 14” 1” 30” 2 / 3A1EAC-1520 .17” 24 .064 2 15” 1” 20” 2 / 3A1EAC-1620 .17” 24 .064 2 16” 1” 20” 2 / 3A1EAC-1624 .17” 24 .064 2 16” 1” 24” 2 / 3A1EAC-1625 .17” 24 .064 2 16” 1” 25” 2 / 3A1EAC-1820 .17” 24 .064 2 18” 1” 20” 2 / 3A1EAC-2020 .17” 24 .064 2 20” 1” 20” 2 / 3A1EAC-2024 .17” 24 .064 2 20” 1” 24” 2 / 3A1EAC-2025 .17” 24 .064 2 20” 1” 25” 2 / 3A1EAC-2424 .17” 24 .064 2 24” 1” 24” 2 / 3A1EAC-2030 .17” 24 .064 2 20” 1” 30” 2 / 3A1EAC-2036 .17” 24 .064 2 20” 1” 36” 2 / 3
A1EAC-CUSTOM .17” 24 .064 2 All Sizes up to 700 Square Inches 2 / 3
54
Indo
or A
ir Q
ualit
y
54
• MERV 10 Filter removes particles as small as 0.3 micron (1/84,000 of an inch)• Carbon fi lters remove odors• Reversible airfl ow; mounts in any position• Easy-to-change fi lter; no fussing with complicated combs or brackets• Heavy-gauge galvanized steel cabinet provides trouble-free vertical or
horizontal installation• Durable powder-coat paint fi nish resists corrosion• Replacement fi lters available; see table below
LIMITED WARRANTY• Lifetime
AMU High-Efficiency Media Air Cleaner
The Amana® brand AMU High-Effi ciency, MERV 10 Charged-Media Retrofi t Air Cleaner is designed to remove air contaminants down to 0.3 microns (1/84,000 of an inch). The AMU series helps protect and prolong the operating effi ciency of the heating and cooling equipment. Its perfect fi t allows no air gaps, thereby maximizing the system’s ability to clean the air. The AMU’s reversible airfl ow allows the fi lter to be mounted on any position. A user-friendly, easy-to-change fi lter means no fussing with complicated combs or brackets. The AMU air cleaners remove atmospheric and household dust, coal dust, insecticides, dust mites, pollen, mold spores, fungi, bacteria, cooking smoke and grease, pet dander and tobacco smoke particles.
Model Standard FeaturesM0-1056 Filter for AMU1620 (3 per carton)
M1-1056 Filter for AMU1625 (3 per carton)
M2-1056 Filter for AMU2020 (3 per carton)
M8-1056 Filter for AMU2025 (3 per carton)
1156-3 Carbon Filters (set of 3) for AMU1620/1625
1856-3 Carbon Filters (set of 3) for AMU2020/2025
ModelPressure Drop House
Size Duct SizeIntake
Dimensions(H x D)
Dimensions (W x D x H)
MERV Rating
Weight (pounds)CFM @ .067”
per WGCFM @ .22”
per WGAMU1620 600 1,200 <2,400 ft² 16” x 20” 13⅛” x 20¾” 7.5” x 23¾” x 17” 10 17AMU1625 700 1,400 <3,000 ft² 16” x 25” 13⅝” x 24” 7.5” x 26½” x 17” 10 18AMU2020 700 1,400 <3,000 ft² 20” x 20” 18” x 18¾” 7.5” x 21¾” x 22” 10 19AMU2025 1,000 2,000 <3,000 ft² 20” x 25” 18” x 23½” 7.5” x 26½” x 22” 10 20
55
Indoor Air Quality
55
LIMITED WARRANTY• 1-Year
HUM Bypass and Fan-Powered Humidifier
The Amana® brand HUM Bypass and Fan-Powered High-Capacity Humidifi ers are a good choice for homes with warm-air heating systems. The durable thermoplastic cabinet resists rust, corrosion and warping and its UV-resistant plastic is Architectural Gray.
• Evaporator pad—with holes and connecting strands that signifi cantly increase the evaporation surface—dispenses water evenly in front of a warm air stream to evaporate and raise the humidity level effi ciently
• Designed to fi t today’s narrower plenums, as narrow as 10” (HUM-SFTBP) and 14” (HUM-LFTBP, HUM-FP)
• Reversible side panels with unique snap-lock fi ttings permit easy-change; left-side or right-side bypass installation (HUM-SFTBP, HUM-LFTBP)
• Ideal for installations where the return air plenum is not easily accessible(HUM-FP)
• Summer Shut-off Damper reduces bypass air through the humidifi er during the summer months allowing the air conditioner to run more effi ciently and economically (HUM-SFTBP, HUM-LFTBP)
• Improved wicking and water distribution system accommodates non-level plenums
• Creates a purifi ed, contaminant-free vapor forindoor air, which may improve your family’s health and comfort
• Low profi le makes unit ideal where space is limited
Model Description
Moisture Output Capacity DimensionsWeight
(pounds)Pound per Hour
Gallons Per Hour @ 120
*F (GPH)
Gallons Per Day (GPD)
Width Depth HeightPlenum
Opening (H x W)
Bypass Opening Diameter
HUM-SFTBP Small, Flow-Thru Bypass 4.84 0.58 14 9⅝” 12½” 13½” 10” x 9” 6” 10
HUM-LFTBP Large, Flow-Thru Bypass 6.26 0.75 18 9⅝” 13¾” 18⅝” 16⅝” x 10⅝” 6” 11
HUM-FP Fan-Powered Flow-Thru 6.60 0.79 19 9⅝” 13¾” 18⅝” 16⅝” x 13⅛” N/A 15
56
Indo
or A
ir Q
ualit
y
56
LIMITED WARRANTY• Lifetime—Polypropylene Core• 5-Year—Enthalpy Core• 7-Year—Motors• 5-Year—Parts
HRV/ERV Heat/Energy Recovery Ventilator
The Amana® brand HRV/ERV Heat/Energy Recovery Ventilators are easy to install and service. The fully insulated cabinet with 1” high-density, polystyrene foam insulation prevents condensation and meets the requirements of the UL 94 HF and is constructed of 22-gauge galvanized-steel with powder coat paint fi nish (HRV-150 and HRV-150D are 24-gauge).
• Two German-manufactured, factory-balanced EBM™ external rotor motors with backward-curved blades
• Motors have permanently lubricated sealed bearings • Energy-effi cient, polypropylene heat recovery ventilator core and enthalpy
energy recovery ventilator core are confi gured for effi cient cross-fl ow ventilation and are designed to withstand extreme temperature variations (HRV-300D has 2 cores)
• Washable, electrostatic, panel-type air fi lters (2)• External, 3-position (Low/Stand By/Medium) rocker switch offers
continuous ventilation• State-of-the-art control boards provide easy connection to existing
HVAC equipment• Unit can be serviced through an easy-access, latched access door• Core conveniently slides out with ease on an improved railing (channel
guide) system• Service light indicator and external electrical box allows for easy servicing
and maintenance• Screw-type dial on electrical box allows supply air to be adjusted to match
exhaust air fl ow and uses the “TRUE” motor adjustment feature (HRV-150D, HRV-200D only)
• Effi cient power • Optional remote controls provide easy operation• Advanced Defrost Cycle strategy• Unit may be installed using the factory-supplied installation kit, which includes
mounting bolts for the top 4 corners of the unit or suspended with chains and hooks
ModelRecovery Ventilator
TypeCFM
Power* DimensionsCore Size/Filter Size
Weight (pounds)Voltage Amps Watts Width Depth Height
Supply/ Exhaust
Diameter
External Vent
Depth
Internal Vent
DepthHRV-150 Heat 123 120 1.5 150 17⅜” 23½” 16⅛” 6” 2¼” 2⅝” 9” x 9” x 15”
8½” x 15” x ⅛” 49
HRV-200 Heat 168 120 1.9 150 17⅜” 27⅞” 20½” 6” 2¼” 2⅝” 12” x 12” x 15”11¾” x 15” x ⅛” 66
HRV-150D Heat (Defrost) 123 120 1.5 150 17⅜” 23½” 17⅜” 6” 2¼” 2⅝” 9” x 9” x 15”
8½” x 15” x ⅛” 51
HRV-200D Heat (Defrost) 168 120 1.9 150 17⅜” 27⅞” 20½” 6” 2¼” 2⅝” 12” x 12” x 15”
11¾” x 15” x ⅛” 66
HRV-300D Heat (Defrost) 247 120 2.7 150 17⅜” 50⅞” 221/5” 6” 2¼” 2¼” 12” x 12” x 15”
11¾” x 15” x ⅛” 125
ERV-150 Energy 135 120 1.5 150 17⅜” 23½” 16¼” 6” 2¼” 2⅝” 9” x 9” x 15”8½” x 15” x ⅛” 49
ERV-200 Energy 155 120 1.9 150 17⅜” 27⅞” 20½” 6” 2¼” 2⅝” 12” x 12” x 15”11¾” x 15” x ⅛” 66
57
Indoor Air Quality
57
Features for UVX-DM1700/UVX-DM4000 – Air Purifi er• Destroys chemical and biological odors, including bacteria, viruses, mold and
volatile organic compounds (VOC)• Larger, high-intensity UVC/UVV 19mm, quartz, dualzone lamp for more
purifying area• Easy, one-lever lamp clamp• Patented, high-effi ciency aluminum Turbulator at refl ector inlet slows
contaminated air to be mixed around the UV lamp for purifi cation• Aluminum refl ector can be rotated in 90 degree increments on the back plate• Designed to be installed in the return plenum• Most effective UV air purifi cation system on the market• Hardwired to HVAC System• In-duct installation for whole-house purifi cation• “Plug & Play” Operation; pressure sensor automatically turns purifi er On and
Off (UVX-DM4000)
Features for UVX-PR12/UVX-PR18 – Object Purifi er• Destroys bacteria, mold, viruses and biological odors• Patent-pending, aluminum parabolic refl ector directs and intensifi es all the UV
energy to the desired area, ensuring a coil free of microbial growth• Parabolic refl ector can be rotated 360 degrees around the lamp• Multi-Installation – above or inside the A-coil keeps it free of biological
contaminants, including mold and fungus; the patented parabolic refl ector is designed to protect the drain pan from UV degradation
• Lamp available in 12” and 18” lengths
LIMITED WARRANTY• 3-Year
UVX Ultraviolet Air and Object Purifier
The Amana® brand UVX Ultraviolet Air and Object Purifi ers are ideal for offi ces, lounges, smoking rooms, day care centers and any location where clean air is desired. Specifi c units come with a high-intensity, 19mm, quartz, germicidal UVC lamp (UVX-PR Series) and UVC/UVV germicidal oxidizing lamp (UVX-DM Series). Units also feature the ultra-bright LED “Smart Lamp System” visual display.
Model Description House SizeUV Intensity Inside
Refl ector(microwatts per/cm²)
Power Dimensions Weight(pounds)Voltage Hz Width Depth Height
UVX-PR12 Object Purifi er/Probe Style N/A N/A 110/220 50/60 7” 12” 7” 3UVX-PR18 Object Purifi er/Probe Style N/A N/A 110/220 50/60 7” 18” 7” 3
UVX-DM1700 Air Purifi er/Duct-mounted <1,700 ft² 10,212 110/220 50/60 7” 9” 7” 4½UVX-DM4000 Air Purifi er/Duct-mounted <4,000 ft² 16,479 110/220 50/60 7” 12” 7” 8
Acce
ssor
ies
58
Model Description Used With These Models Where RequiredASC01A Anti-Short Cycle Kit Amana™ brand Split System Heat Pumps
ATK05A Ambient Temperature Kit; locks out second-stage heat until ambient temperature is below set point Amana™ brand Split System Heat Pumps
LAC03A Low Ambient Control Amana™ brand Split System Heat Pumps
FFK03AFossil Fuel Kit; required for use with a duel-fuel split
system heat pump system; kit contains ATK05A Ambient Temperature Kit
Amana™ brand Split System Heat Pumps
FSK01A Freeze Protection Kit (Indoor Coil) Amana™ brand Split System Heat Pumps
PCK03A Pressure Control Kit; high-pressure switch and time delay relay Amana™ brand R-22 Split System Heat Pumps
Model Description Used With These Models Where Required
PCK01A Pressure Control Kit;high-pressure switch and time-delay relay Amana® brand R-22 Split System Air Conditioners
ASC01A Anti-Short Cycle Kit Amana® brand Split System Air Conditioners
LAC03A Low Ambient Control;can only be used with TXV-equipped indoor coil Amana® brand Split System Air Conditioners
FSK01A Freeze Protection Kit (Indoor Coil) Amana® brand Split System Air ConditionersLSK01A Liquid Line Solenoid Amana® brand Split System Air Conditioners
Split System Air Conditioners
Split System Heat Pumps
Gas Furnaces
LIMITED WARRANTY• 5-Year—Parts (when installed in conjunction with a piece of equipment)• 1-Year—Parts (when installed in existing equipment)
Model Description Used With These Models Where RequiredLPL01 Low L.P. Gas Pressure Switch Amana® brand Gas Furnaces (converted to LP gas use)
LPLP01 L.P. Gas Low Pressure Kit Amana® brand 90% Multi-Speed Gas FurnacesLPT-00A L.P. Conversion Kit Amana® brand 90%/80% Multi-Speed Gas FurnacesLPM-03 L.P. Conversion Kit Amana® brand 90%/80% Variable-Speed Gas FurnacesASAS* Electronic Air Cleaner (* = -10, -11, -12 or -18) Amana® brand 90%/80% Variable-Speed Gas FurnacesAMU* Media Air Cleaner (* = 1620, 2020, 1625 or 2025) Amana® brand 90%/80% Variable-Speed Gas Furnaces
DEHUM1 Dehumidistat Amana® brand 90% Variable-Speed Gas FurnacesHA02 High Altitude Natural Gas Kit Amana® brand 80% Multi-Speed Gas Furnaces
HALP10 High Altitude L.P. Gas Kit Amana® brand 90% Multi-Speed Gas FurnacesHALP11 High Altitude L.P. Gas Kit Amana® brand 90% Variable-Speed Gas Furnaces
HANG11 High Altitude Natural Gas Kit Amana® brand 90% Multi-Speed Gas FurnacesHANG12 High Altitude Natural Gas Kit Amana® brand 90% Multi-Speed Gas FurnacesHANG13 High Altitude Natural Gas Kit Amana® brand 90% Variable-Speed Gas FurnacesHANG14 High Altitude Natural Gas Kit Amana® brand 90% Variable-Speed Gas FurnacesHAPS27 High Altitude Pressure Switch Kit Amana® brand 90% Multi-Speed Gas FurnacesHAPS28 High Altitude Pressure Switch Kit Amana® brand 90% Variable-Speed Gas FurnacesHAPS29 High Altitude Pressure Gas Kit Amana® brand 90% Variable-Speed Gas FurnacesEFR01 External Filter Rack Amana® brand 90% Variable-Speed Gas Furnaces
DCVK-20 Alternate Concentric Vent Kit (2”) Amana® brand 90% Variable-Speed Gas FurnacesDCVK-30 Alternate Concentric Vent Kit (3”) Amana® brand 90% Variable-Speed Gas Furnaces
CFB17 Downfl ow Floor Base Amana® brand 90% 17” wide Downfl ow Gas FurnacesCFB21 Downfl ow Floor Base Amana® brand 90% 21” wide Variable-Speed Gas FurnacesCFB24 Downfl ow Floor Base Amana® brand 90% 24” wide Variable-Speed Gas FurnacesSBT14 Downfl ow Subbase Amana® brand 80% 14” wide Multi-Speed Gas FurnacesSBT17 Downfl ow Subbase Amana® brand 80% 17½” wide Multi-Speed Gas FurnacesSBT21 Downfl ow Subbase Amana® brand 80% 21” wide Multi-Speed Gas Furnaces
FFK03A Fossil Fuel Kit Amana® brand 80% Variable-Speed/Multi-Speed Gas FurnacesFTK03A Twinning Kit Amana® brand 90%/80% Multi-Speed Gas Furnaces
Accessories
59
Model Description Used With These Models Where RequiredCHK001A Horizontal Duct Cover Kit PHB/PHD24-42
ATK01 Outdoor Ambient Thermostat Kit; controls electric heat by outside temperature PHB/PHD24-48
PDTROU4A Over/Under Duct Conversion PHB24-36/PHD24-48PDTROU6A Over/Under Duct Conversion PHB42-60PRC06A1 Roof Curb PHB and PHD24-48PRC08A1 Roof Curb - Combination PGA/PGB/PGD/PHB/PHD24-48
PHCB05C1 5 kW Electric Heat Kit PHB/PHDPHCB07C1 7 kW Electric Heat Kit PHB/PHDPHCB10C1 10 kW Electric Heat Kit PHB/PHDPHCB15C1 15 kW Electric Heat Kit PHB/PHDPHCB20C1 20 kW Electric Heat Kit PHB/PHD
SPK04A Single Point Wiring Kit for 15 & 20 kW EH PHB24/PHD24SPK05A Single Point Wiring Kit for 15 & 20 kW EH PHB30/PHD30-36SPK06A Single Point Wiring Kit for 15 & 20 kW EH PHB36/PHD42SPK07A Single Point Wiring Kit for 15 & 20 kW EH PHB42SPK08A Single Point Wiring Kit for 15 & 20 kW EH PHB48/PHD48SPK09A Single Point Wiring Kit for 15 & 20 kW EH PHB60
Model Description Used With These Models Where RequiredCHK001A Horizontal Duct Cover Kit PCA
ATK01 Outdoor Ambient Thermostat Kit PCA
FSK01A Freeze Protection Kit PCA
LOC501A 50° Compressor Lockout PCA
PRC06A1 Roof Curb PCA/PCC
PRC08A1 Roof Curb - Combination PGA/PGB/PGD/PHB/PHD24-48/PCA/PCC
PDTROU4A Over/Under Duct Conversion PCA/PCC24-36
PDTROU6A Over/Under Duct Conversion PCA/PCC42-60
RSDK01A Round to Square Duct Kit PCA
PHCB05C1 5 kW Electric Heat Kit PCA/PCC
PHCB07C1 7 kW Electric Heat Kit PCA/PCC
PHCB10C1 10 kW Electric Heat Kit PCA/PCC
PHCB15C1 15 kW Electric Heat Kit PCA/PCC
PHCB20C1 20 kW Electric Heat Kit PCA/PCC
SPK04A Single Point Wiring Kit for 15 & 20 kW EH PCA/PCC24
SPK05A Single Point Wiring Kit for 15 & 20 kW EH PCC30-36
SPK06A Single Point Wiring Kit for 15 & 20 kW EH PCA30-36
SPK07A Single Point Wiring Kit for 15 & 20 kW EH PCA42/PCC42-48
SPK08A Single Point Wiring Kit for 15 & 20 kW EH PCA48
SPK09A Single Point Wiring Kit for 15 & 20 kW EH PCA/PCC60
Packaged Air Conditioners
Packaged Heat Pumps
Acce
ssor
ies
60
Model Description Used With These Models Where RequiredLPKT09 LP Gas Conversion Kit PGD/PGB
LPKT05 LP Gas Conversion Kit PGA/PGB/PGD and PHB/PHD
CHK001A Horizontal Duct Cover Kit Down-discharge PGD24-42 and PGB24-42(low heat) applications
CHK002A Horizontal Duct Cover Kit Down-discharge PGD48-60 and PGB42C (high heat);PGB60 applications
PRC07A1 Roof Curb - Gas/Electric PGD/PGBPRC08A1 Roof Curb - Combination PGA/PGB/PGD & PHB/PHD
PDTROU4A Over/Under Duct Conversion PGD24-42 and PGB24-PGB42 (low heat) applicationsPDTROU6A Over/Under Duct Conversion PGD48-60 and PGB42C (high heat); PGB60 applications
Packaged Gas/Electric Units
* Offered by McDaniel Metals • Main: (281) 987-8400 • Fax: (281) 987-9494
Model DescriptionPCCP-1 Curb and Platform Kit
PCCP2-3 Curb and Platform Kit
PCE-1 Fully Modulating Economizer (slide-in)
PCE2-3 Fully Modulating Economizer (slide-in)
PCEF-1 Elbow and Flashing Kit
PCEF2-3 Elbow and Flashing Kit
PCMD-1 Manual Damper
PCMD2-3 Manual Damper
PCP-1 Plenum Kit
PCP2-3 Plenum Kit
SQRPC-1 Square to Round Converter (down discharge)
SQRPC2-3 Square to Round Converter (down discharge)
SQRPCH-1 Square to Round Converter (horizontal discharge)
SQRPCH-2 Square to Round Converter (horizontal discharge)
SQRPCH-3 Square to Round Converter (horizontal discharge)
Commercial Packaged Units*
Accessories
61
Model DescriptionPGC-5 Roof Curb
PGMD-5 25% Manual Fresh Air DamperPGMDM-5 25% Motorized Fresh Air Damper
SQRPG090-5 Square to Round Adapter for 7½ TonPGP-5 4” Plenum Drops with Caps
PGED090/102-5 Downfl ow Economizer 7½ and 8½ Ton for PGB Commercial and PCB CommercialPGED090/102-5A Downfl ow Economizer 7½ and 8½ Ton for PGC Commercial and PCC CommercialPGED120/180-5 Downfl ow Economizer 10 and 15 Ton for PGB Commercial and PCB Commercial
PGED120/180-5A Downfl ow Economizer 10 and 15 Ton for PGC Commercial and PCC CommercialPGHDK090/102-5 Horizontal Duct Kit 7½ and 8½ Ton for PGB Commercial and PCB Commercial
PGHDK090/102-5A Horizontal Duct Kit 7½ and 8½ Ton for PGC Commercial and PCC CommercialPGHDK120/180-5 Horizontal Duct Kit 10 and 15 Ton for PGB Commercial and PCB Commercial
PGHDK120/180-5A Horizontal Duct Kit 10 and 15 Ton for PGC Commercial and PCC CommercialPLK090/102-5 Panel Louver Kit 7½ and 8½ TonPLK120/180-5 Panel Louver Kit 10 and 15 Ton
CDK90 Concentric Duct Kit 7½ and 8½ TonCDK120 Concentric Duct Kit 10 and 15 TonCDK150 Concentric Duct Kit 12½ TonCDK180 Concentric Duct Kit 15 Ton
PGEHO90/102-5 Horizontal Economizer 7½ and 8½ TonPGEH120/180-5 Horizontal Economizer 10 and 15 Ton
PGCT120-5 Concentric Transition 10 Ton
* Offered by McDaniel Metals • Main: (281) 987-8400 • Fax: (281) 987-9494
Commercial Packaged Units*7½ to 15 Ton
APG12, APG10 and GPG CommercialPackaged Gas/Electric Units
Model DescriptionLPT-00A L.P. Conversion Kit
PGC101/102/103 Roof Curb PGED101/102 Downfl ow Economizer
PGED103 Downfl ow EconomizerPGEH101/102 Horizontal Economizer
PGEH103 Horizontal EconomizerPGMDD101/102 Manual 25% Fresh Air Damper - Downfl ow Application
PGMDD103 Manual 25% Fresh Air Damper - Downfl ow ApplicationPGMDH101 Manual 25% Fresh Air Damper - Horizontal ApplicationPGMDH102 Manual 25% Fresh Air Damper - Horizontal ApplicationPGMDH103 Manual 25% Fresh Air Damper - Horizontal Application
PGMDMD101/102 Motorized 25% Fresh Air Damper - Downfl ow ApplicationPGMDMD103 Motorized 25% Fresh Air Damper - Downfl ow ApplicationPGMDMH101 Motorized 25% Fresh Air Damper - Horizontal ApplicationPGMDMH102 Motorized 25% Fresh Air Damper - Horizontal ApplicationPGMDMH103 Motorized 25% Fresh Air Damper - Horizontal Application
SQRPG101/102 Square to Round Adapter with 16” Round - Downfl ow ApplicationSQRPG103 Square to Round Adapter with 18” Round - Downfl ow Application
SQRPGH101/102 Square to Round Adapter with 16” Round - Horizontal ApplicationSQRPGH103 Square to Round Adapter with 18” Round - Horizontal Application
PGFR101/102/103 Internal Filter Rack
Acce
ssor
ies
62
Model Description Used With These Models Where Required
HKR-03 3 kW Electric Heat Kit without Circuit Protection ARUF/ARPT/AEPT Air Handlers and MBE/MBR Blowers
HKR-05 5 kW Electric Heat Kit without Circuit Protection ARUF/ARPT/AEPT Air Handlers and MBE/MBR Blowers
HKR-05C 5 kW Electric Heat Kit with Circuit Protection ARUF/ARPT/AEPT Air Handlers and MBE/MBR Blowers
HKR-06 6 kW Electric Heat Kit without Circuit Protection ARUF/ARPT/AEPT Air Handlers and MBE/MBR Blowers
HKR-08 8 kW Electric Heat Kit without Circuit Protection ARUF/ARPT/AEPT Air Handlers and MBE/MBR Blowers
HKR-08C 8 kW Electric Heat Kit with Circuit Protection ARUF/ARPT/AEPT Air Handlers and MBE/MBR Blowers
HKR-10 10 kW Electric Heat Kit without Circuit Protection ARUF/ARPT/AEPT Air Handlers and MBE/MBR Blowers
HKR-10C 10 kW Electric Heat Kit with Circuit Protection ARUF/ARPT/AEPT Air Handlers and MBE/MBR Blowers
HKR-15C 15 kW Electric Heat Kit with Circuit Protection ARUF/ARPT/AEPT Air Handlers and MBE/MBR Blowers
HKR-20C 20 kW Electric Heat Kit with Circuit Protection ARUF/ARPT/AEPT Air Handlers and MBE/MBR Blowers
HKR-21C 21 kW Electric Heat Kit with Circuit Protection ARUF/ARPT/AEPT Air Handlers and MBE/MBR Blowers
HKR3-15 3-phase 15 kW Electric Heat Kit ARUF/ARPT/AEPT Air Handlers and MBE/MBR Blowers
HKR3-20 3-phase 20 kW Electric Heat Kit ARUF/ARPT/AEPT Air Handlers and MBE/MBR Blowers
Air Handlers
Accessories
63
Image Model/Color
Application for Use With
ChangeOver
Day Programming Stages Display Emergency
Heat Switch Powered
1213401/White
Gas HeatElectric HeatElectric Cool
Manual 5+2 1 Cool/1 Heat Digital N/A Battery
1213402/White
Gas HeatElectric HeatElectric Cool
Manual No 1 Cool/1 Heat Digital N/A Battery
1213403/White Heat Pump Manual No 1 Cool/2 Heat Analog Yes Hard
Wired
1213404/White Heat Pump Manual No 1 Cool/2 Heat Digital Yes Hard
Wired
1213406/Beige
Heat Pump w/Electric Heat
w/2-stage Gas Furnace
(Fossil Fuel Kit)
Manual/Auto 5+2 2 Cool/3 Heat Digital Yes Hard
Wired
1213407/White
Heat Pump w/2-stage Gas
Furnace(Fossil Fuel Kit)
Manual 5+2 2 Cool/2 Heat Digital No
Hard Wired w/ Battery Backup or
Battery-only
1213408/White
Gas HeatElectric HeatElectric CoolSingle-stage Heat Pump
Manual/Auto 7-Day 1 Cool/1 Heat Digital N/A Power-
stealing
1213410/White Heat Pump Manual 5+2 1 Cool/2 Heat Digital Yes Hard
Wired
1213411/White
Gas HeatElectric HeatElectric Cool
Up to 2-stage Heat or Cool
No Heat Pump
Manual No 2 Cool/2 Heat Digital No
Hard Wired or Battery-
only
1213412/White
Multi-StageGas, Oil, Electric
Up To 2-stage Heat Pump
Manual/Auto
7-Day with Vacation
Mode2 Cool/3 Heat Digital Yes Hard
Wired
1213431/White
Multi-StageGas, Oil, Electric
Up To 2-stage Heat Pump;
Humidity Control
Manual/Auto
7-Day with Vacation
Mode2 Cool/3 Heat Digital Yes Hard
Wired
Amana™ Brand Thermostats
For additional coverage, you may purchase the AsureSM Extended Service Plan. As a registered AsureSM Dealer, you can
offer your customer parts, labor and unit replacement agreements for up to 10 years as a safeguard from potential failures.
With the AsureSM Extended Service Plan, you can build your customer base by providing worry-free comfort to your customers.
The be s t standard warranty protection in the industry just
got be t t e r .Once again, we lead the industry with possibly the most comprehensive warranty coverage of any air conditioner, heat pump or gas furnace on the market. We stand behind our products like no other company in the HVAC industry.
Lasts and lasts and lasts.™ These words defi ne the essence of Amana® brand heating and cooling products. For nearly 70 years, consumers have associated the Amana® brand name with high-quality products that provide years of reliable service and enhance the comfort in their lives.
We are committed to continuing this 70-year relationship with consumers by providing heating and cooling products that offer exceptional standard warranties on selected high-effi ciency air conditioners, heat pumps and gas furnaces.
© 2005 Goodman Company, L.P.Fayetteville, TennesseeForm: PRODCAT-01ARegistered to ISO 9001 by QMI Quality Certificate #007062Printed in USA. • Amana® brand products are made proudly in the USA.www.amana-hac.com
Goodman Company, L.P., reserves the right to discontinue, or change at any time, specifications or designs without notice or without incurring obligations.
Amana® and Air Command® are registered trademarks of Maytag Corporation and used under license to Goodman Company, L.P.Amana Distinctions™ and TempAssure™ are trademarks of Maytag Corporation and used under license to Goodman Company, L.P.AsureSM is a service mark of Maytag Corporation and used under license to Goodman Company, L.P. All rights reserved.
Copeland® is a registered trademark of Copeland Corporation.
Quietflex® is a registered trademark of Quietflex Manufacturing Company, L.P.
For questions regarding this catalog, please call 1-888-292-6262.