Portable Saws & Accessories - Thomasnet

Portable Saws & AccessoriesPortable Saws & AccessoriesHeavy-duty Saws… Fast, accurate cutting on the job site!

SPEC

IAL

FEA

TURE

S A

ND

BEN

EFIT

S

2 • 1-800-700-5919 • Visit our Web site at www.csunitec.com

CS Unitec's portable saws and tools are ideal for cutting pipe, structural steel, tanks,bolts, angle iron, concrete and other materials, including plastic and wood. We offerthe widest range of portable pneumatic, electric and hydraulic saws in the industry.

Our saws can be used as hand-held tools or with an assortment of clamps for pipeand other materials. All CS Unitec saws are heavy-duty for use in industry andconstruction. Our complete saw line includes pneumatic-, electric- and hydraulic-powered tools, saw blades and accessories, all available for prompt delivery.

CS Unitec is the industry leader in:• Portable saws for cutting pipe, metal, concrete, etc.• Compact, lightweight, hand-held and clamp-mounted saws• The best power-to-weight ratios• Long-lasting, heavy-duty saw blades for fast cutting of steel,stainless steel, Inconel, chrome, Hastelloy, aluminum, iron,plastics, masonry, concrete and other materials

We offer:• Pneumatic-, electric- and hydraulic-powered saws• Clamps for 90˚ cutting of pipe, structural steel and other materials• Compact sizes for sawing in confined spaces

Tool and Accessory Index:

Portable Band Saws p. 20-23Pneumatic

4 3/4" capacity p. 217" & 9" capacity p. 21

Electric4 3/4" capacity p. 227" & 9" capacity p. 22

Hydraulic4 3/4" capacity p. 227" & 9" capacity p. 22

Band Saw Blades and Accessories p. 23

Portable Reciprocating Saws p. 4-13Pneumatic – Low Air Volume

PL905 (for high-volume production environments) p. 5CL50/CL75 (for demanding maintenance apps.) p. 6JP901 (for fiberglass and sheet metal production) p. 6

Pneumatic1.3 HP – The CAT p. 101.6 HP – The WOLF p. 11

Hydraulic2 HP – The SHARK p. 12

Electric - The FOX9.5 Amp, 12 Amp p. 12

Reciprocating Saw Blades p. 13

Dry Cutting Pneumatic Metal Saw p. 7

Nibblers p. 33

AirPac p. 33

Lubricants p. 17, 33

Circular Saw for Stone p. 34

Wall Slotter p. 35

Warranty p. 35

Concrete Saws p. 28-32Chain Saws

Pneumatic p. 28-29Hydraulic p. 28-29Accessories p. 30About Diamond Chain Life p. 31

Cut-off14" and 18" Pneumatic Hand-held p. 3220" Pneumatic Walk-behind p. 32

Chain Saws p. 24-274 HP Pneumatic p. 244 HP Pneumatic with Brake p. 251.2 HP Pneumatic p. 25Saw Chains and Accessories p. 24-25Hydraulic Chain Saw p. 26PowerGrit Air Utility Chain Saw p. 27

Portable Hacksaws p. 14-19Pneumatic, Electric & Hydraulic p. 14-16Hacksaw Accessories p. 17-18Hacksaw Blades p. 19

Selected air andhydraulic models in our line are ATEXClassified for working in Ex Zones. Contact us for more information.

ATEX ClassifiedATEX Classified

• 1-800-700-5919 • Visit our Web site at www.csunitec.com

Choose your Power…

Choose your Cutting Method…

Pneumatic-powered Saws• ATEX Classified foruse in hazardous areas (selected models)

• Reliable and require less maintenance• High power-to-weight ratios

Electric-powered Saws• Ideal for heavy-duty cutting applicationsin industry and construction

• Simple and easy to use• Available in 110 Volt/60Hz or 220 Volt/50Hz

Track-mountedWe offer a variety of clampsfor applications that requirethe saw to be stable.

Hand-heldWe lead the industry in ruggedportable saws that are ideal forfree-hand cutting applications.

90˚ with Pipe ClampsOur portable saws are ideal forright-angle cutting of pipe andstructural steel using chainclamps or vise-on clamps.

Choose your Heavy-duty Blades and Chains…

Heavy-duty Thick90˚ cutting with a clamp is easywhen you use our heavy-dutythick blades.

Chains and BladesWe offer diamond chains, carbidechains and chisel chains, as wellas diamond saw blades, for a widevariety of sawing applications.

Special Features and BenefitsSpecial Features and Benefits

SPEC

IAL

FEA

TURE

S A

ND

BEN

EFIT

S

3

ReciprocatingOur extensive blade lineincludes a complete range ofblades for reciprocating saws.

Hydraulic-powered Saws• Utilized for special cuttingsituations, such as underwater

• Ideal for professional sawingand drilling applications wherehydraulic power is the norm

• ATEX Classified (selectedmodels)


REC

IPRO

CA

TIN

G S

AW

S


Reciprocating Air SawsReciprocating Air Saws

PL Saws - For High-volumeProduction Environments

p. 5

CL Saws - For DemandingMaintenance Applications p. 6

JP Saws - For Fiberglassand Sheet Metal Production p. 6

HB300/18HB300/24HB300/32MC220/18MC220/24MYN150/18MYT150/18

Hand

Hand

Hand

Machine

Machine

Notched Yellow

Tapered Yellow

18 TPI

24 TPI

32 TPI

18 TPI

24 TPI

18 TPI

18 TPI

12" L

12" L

12" L

83/4" L

83/4" L

6" L

6" L

1/2" Wide Bi-metal Blades (for CL50, JP901 and PL905)

MB150/18MB200/10-14MB200/18MB200/24MB250/18MB250/24MB300/10-14MB300/18

Machine

Machine

Machine

Machine

Machine

Machine

Machine

Machine

18 TPI

10/14 TPI

18 TPI

24 TPI

18 TPI

24 TPI

10/14 TPI

18 TPI

6" L

8" L

8" L

8" L

10" L

10" L

12" L

12" L

3/4" Wide Bi-metal Blades (for CL75)

Compact, Quiet & ReliableLow Vibration/Low Air VolumeCut Pipe, Structural Steel, Sheet

Metal, Fiberglass, Plastic and More.

• Piston air motors use low air volume (CFM)while maintaining a fast cutting speed(2000 to 10,000 strokes per minute)

• Safe around gas and other flammablematerials; recommended for fire and rescueapplications where high CFM isn't available

• ATEX Classified – for use in hazardous areas

• CL and PL saws use standard hand hacksawblades; convert to a 3/4" blade size simply bychanging the nosepiece

• Rugged saw bodies constructed ofheavy-duty cast steel and aluminum

• Built-in lubrication system automaticallylubricates the motor

• Safety STOP/Isolator button disconnectsair supply

Lubricating Oils (see pgs. 17, 33)• ProLube™ is a super-premium, low-viscosity

synthetic air tool lubricant

• ProLube-ATL/AF is a special blend preventingfreezing in cold climate conditions

MS Cleaner (MS 9105)• An ideal conditioner for air tools used underwater


Cengar Air Saw Blades

REC

IPRO

CA

TIN

G S

AW

S

5• 1-800-700-5919 • Visit our Web site at www.csunitec.com

Reciprocating Air SawsReciprocating Air SawsIdeal for cutting pipe, metals, fiberglass and more

Motor PowerStroke LengthStrokes per Min.WeightLength x Height x WidthAir ConsumptionAir PressureAir ConnectionAir HoseNoise Level (dB)Vibration Level (m/s2)

1 HP7/8"

20005 1/4 lbs.

113/4" x 51/4" x 15/8"4 CFM90 PSI

1/4" NPT1/4" ID

691.73

Models PL905 / PL905FT

Low Vibration • Low Noise• Ideal for high-volume production applications such as cutting

steel, repairing wooden pallets, building and repairing truckbodies and cutting fiberglass

• Also widely used by oil and gas contractors andfire rescue services

• Sturdy cast steel and aluminum saw body

• Low air volume – only 4 CFM

• 7/8" blade stroke, up to 2000 strokes per minute

• Fitted with easy-to-use STOP/Isolator button on the handlefor safety when changing blades

• Uses any 1/2" (12mm) wideBi-metal hand, machine or yellow blades

• Optional inside trigger*order PL905FT

Model PL905 Outside trigger(standard)

Model PL905FTInside trigger

(optional)*

Standard Equipment:carrying case, fiveMC220/24 saw blades,air tool oil, CD operatingmanual, allen key.

Cengar Saw Blades and Accessories (see page 4)

• 1/2" wide Bi-metal Blades suit a wide range of applications

* Inside trigger for hand-held use only; not for usewith a clamp. This trigger style cannot be locked on.


Cut Sheet Metal

Cut Nails


1 HP3/8"

10,00031/2 lbs.

103/4" x 23/4" x 15/8"4 CFM75 PSI

1/4" NPT1/4" ID

691.23

Model JP901

Model JP901 – Speedy, lightweight air saw for repair andconstruction environments, such as boat builders, and inthe construction and repair of car, bus and truck bodies

JP901 uses any 1/2" (12mm) wide Bi-metal hand,machine or yellow blades and can be easily convertedto use 3/4" blades by simply changing the nosepiece

REC

IPRO

CA

TIN

G S

AW

S


Reciprocating Air SawsReciprocating Air SawsIdeal for cutting metal, timber and fiberglass

Low Vibration • Low Noise• Workhorses for use in the fabrication, shipbuilding, ship repair,

oil and petrochemical, boat building and aircraft maintenancefields, as well as by fire and rescue professionals

• Fitted with easy-to-use STOP/Isolator button on the handle forsafety when changing blades

• CL50 uses any 1/2" (12mm) wide Bi-metal hand or machineblade – easily converted to a CL75 by changing the nosepiece

• CL75 uses a 3/4" (19mm) wide Bi-metal machine blade

• Optional inside trigger order CL50FTor CL75FT (inside trigger for hand-held useonly; not for use with a clamp – this triggerstyle cannot be locked on)

Standard Equipment: carrying case, fiveMC220/24 saw blades, air tool oil, CDoperating manual, allen key.


1 HP1 3/4"1200

51/2 lbs.153/4" x 51/4" x 15/8"

53/4 CFM90 PSI

1/4" NPT1/4" ID

833.69

Models CL50 & CL75 / CL50FT & CL75FT


Cengar Saw Blades and Accessories (see page 4)• 1/2" and 3/4" wide Bi-metal Blades suit awide range of applications

• To fit our 3/4" Bi-metal blades, order3/4" nosepiece – Part. No. 5075

Models CL50 & CL75 Outside trigger (standard)

Models CL50FT & CL75FTInside trigger (optional)*

Ideal for cutting fiberglass, light-gauge metal & fiberboard

• Ideal for cutting fiberglass, light-gauge metal andfiberboard up to 3/8" (10mm) thick

• Low air consumption – only 4 CFM

• 3/8" blade stroke, up to 10,000 strokes per minute

• Has automatic lubrication and an easy-to-useSTOP/Isolator button on the handle for safetywhen changing blades


Pneumatic Metal SawPneumatic Metal Saw

Dry Cutting TCT Saw BladesDry Cutting TCT Saw Blades

• Dry cuts steel, non-ferrous metal, plastic, grating,composite and corrugated materials

• Cuts at 90˚ and 45˚ angles

• Ideal for foundries, petrochemical, marine,demolition and fabrication applications

• Cuts steel plate up to 3/8" thick

9" diameter(1" arbor)

Motor PowerBlade DiameterMax. Depth of Cut

Speed (Free)Air ConsumptionAir ConnectionVibrationWeight

2 HP9"

3-1/4" at 90˚2-1/8" at 45˚1,700 RPM

60 CFM at 90 PSI1/2" NPT<2.5 m/s2

19 lbs.

Model 5 1115 0020

9" diameter, dry cutting up to 3 1/4" depth, 3/8" steel plate

Standard blade.073" (1.85mm)thickness

Ultra-thin blade (P/N 722-23060).055" (1.4mm)thickness

Standard equipment includes an impact-resistantcarrying case and Ultra-thin LBS blade (P/N 722-23060).See below for blades.

Laser Beam Saw (LBS) ultra-thin 9" sawblade features:• Thinner than conventional saw blades

LBS = .055" vs. Std. = .073" thickness

• Shock-resistant, less vibration

• Produces 35% fewer chips

Standard dry cutting saw blades:

Part Number

722-23060*

* Comes standard with the Model 5 1115 0020 Pneumatic Metal Saw.

No. ofTeeth

60

BladeThickness

.055"

RecommendedUse

All-purpose

Part Number

721-23048

721-23060

721-23068

721-23084

No. ofTeeth

48

60

68

84

BladeThickness

.073"

.073"

.073"

.073"

RecommendedUse

Standard

Aluminum

Thin-wall metal

Sheet metal

PNEU

MA

TIC

MET

AL

CIR

CU

LAR

SAW

7

REC

IPRO

CA

TIN

G S

AW

S

8

Portable Reciprocating SawsPortable Reciprocating Saws


The most powerfulin the industry!

Hand-held or clamp-on cuttingin tough environments

Pneumatic • Hydraulic • Electric Ideal for a wide range of industries,

including subsea, gas utilities,offshore oil, petrochemical, power

generation, industrial plantmaintenance and construction

• Fast cutting of pipe, structural steel,bolts, nails, pallets and other material

• The best power-to-weight ratios in the industry

• Compact size allows cutting inconfined spaces

• ANC gear drive reduces friction andincreases gear life and power output

• Cut steel pipe and channel up to 6" dia. (or plastic pipe up to 8" dia.)

• 90˚ cuts with optional clamps

The CAT - 1.3 HP PneumaticReciprocating Saw p. 10

The WOLF - 1.6 HP PneumaticReciprocating Saw p. 11

The SHARK - 2 HP HydraulicReciprocating Saw p. 12

Pipe Clamps for 90˚ CuttingCut faster by increasing

your leverage 5xwhile safely

securing thesaw with ourPipe Clamps.

Pipe Clamp for Pipes & Profiles

1/2" - 2" Pipe Vise Clamp – Model No. 259 983

2 1/2" - 4" Pipe Vise Clamp – Model No. 563 1001/2" - 6" Pipe Chain Clamp – Model No. 251 259

The FOX - 9.5 and 12 AmpElectric Reciprocating Saws p. 12

Two Models:Spade (below) or D-handle(right) available.

90˚

Model No. CP1 Universal Clamp• Easily attaches to recip saws andportable hacksaws for 90˚ cuts intight spaces

• Self-aligning feet adjust to theform of the workpiece (round,square and angled)

• 1/2" to 6" capacity with recipsaws – see page 18 for usewith portable hacksaws


REC

IPRO

CA

TIN

G S

AW

S


The New Generation Gear HeadANC = All-round Needle-bearing Crank Drive

Reciprocating SawsReciprocating Saws

ANC Gear Drive: Low Friction • High TorqueThe new, unique design of the ANC gear:

• reduces friction and wear, resulting in lessheat and longer service life.

• resists dust and water, making the gear headmaintenance free.

• allows for aggressive high-torque cutting,providing good chip flow and long blade life.

CS Unitec's reciprocating saws cut faster and last longerthan other saws in their class. The ANC gear drive and heavy-duty air or electric motor provide the best power-to-weight ratio in the industry.

ANC geardrive

Ergonomicallyshaped

housing grip

Universal 1/2" tang, double-tang or M-Tooth blade moves in aggressive orbital action

Patentedsaw blade

mount

Patentedsquare lift rod

Powerful, heavy-duty pneumatic or electric motor

Siliconegasket

Pipeclamp

connection

Reciprocating Saw Blades

Extremely versatile, CS Unitec'sreciprocating saws use the universal 1/2" tang or special double-tang saw blades (see page 13).Our extra-thick saw blades resist bending and cut pipe at right angleswith a pipe clamp.

In addition, CS Unitec's Mega SharpM-Tooth saw blades (see page 13) have a unique, patented tooth geometry that allows these blades to cut quickly with each stroke, forward and back, saving timeand money.

Standard BladesAll CS Unitec reciprocating saws can usethe widely available standard reciprocatingblades with the 1/2" universal tang.

Heavy-duty BladesThese blades are much thicker thanstandard blades and have a strongerdouble-tang mount for heavy-dutycutting, either free-hand or with a clamp.

M-Tooth BladesUnique tooth geometry allowsthese blades to cut in bothdirections – twice as fast!

Cut inBoth Directions!

REC

IPRO

CA

TIN

G S

AW

S


1.3 HP Pneumatic Reciprocating Saw1.3 HP Pneumatic Reciprocating SawIdeal for cutting pipes, structural steel, pallets and more

Saw Kit (5 1217 0060) includessaw, 6" pipe clamp, case andfive No. 1001 heavy-dutyblades.

Model 5 1217 0020 includes carrying caseand two No. 1001 heavy-duty blades.

Reciprocating Saw Bladesand Accessories (see page 13)

• Universal saw blades

• Thicker, heavy-duty double-tang blades for 90˚ cuts

• M-Tooth blades to cut onforward and back stroke

Motor PowerStroke LengthStrokes per Min.WeightLengthAir ConsumptionAir PressureAir ConnectionSaw Kit

1.3 HP1 1/8"

0-18009 lbs.15 7/8"

46 CFM90 PSI

1/2" NPT (ID)Order Model 5 1217 0060

Model 5 1217 0020

Model 5 1217 0020Use hand-held or with a clamp

TheCAT

Pipe Clamps for Straight Cutting up to 6" dia.(see page 17)• Increase leverage

5x for faster cutting

• Safely secure thesaw while cutting

• Cuts steel pipe and channel 1/2" to 4" dia., plastic pipe to8" dia.

• Ideal for the toughest use in refineries, chemical plants,gas utilities, construction, offshore oil, mining, marine anddemolition industries

• 1.3 HP air motor provides more power than conventionalair saws

• 11/8" blade stroke for fast, efficient cutting

• Can be mounted on a pipe clamp to make 90˚ cuts

• Variable speed of 0-1800 strokes per minute

• Accepts universal saw blades or thicker, heavy-dutydouble-tang saw blades (see page 13)

• Molded rubber boot for ergonomic grip


REC

IPRO

CA

TIN

G S

AW

S


1.6 HP Pneumatic Reciprocating Saw1.6 HP Pneumatic Reciprocating SawIdeal for cutting pipe, structural steel and other materials

• Cuts steel pipe and channel 1/2" to 6" dia., plastic pipe to 8" dia.

• Powerful 1.6 HP motor with reciprocating action for steel and longorbital stroke for cutting soft materials including wood, plastic andaluminum

• Can be mounted on a pipe clamp to make 90˚ cuts (see page 18)

• 11/8" blade stroke for fast, efficient cutting

• Selector switch changes stroke setting to eitherstraight or orbital

• Variable speed from 0-2200 strokes per minute

• Accepts universal saw bladesor thicker, heavy-duty double-tang saw blades (see page 13)

• Molded rubber boot for ergonomic grip;side handle included

Saw Kit (5 6005 0060) includes saw, 6" pipeclamp, case, side handle and five No. 1001 heavy-duty blades.

Motor PowerStroke LengthStrokes per Min.WeightLengthAir ConsumptionAir PressureAir ConnectionSaw Kit

1.6 HP1 1/8"

0-220010 3/4 lbs.

17 3/4" 51 CFM90 PSI

1/2" NPT (ID)Order Model 5 6005 0060

Model 5 6005 0010

TheWOLF

Pipe Clamps for Straight Cutting up to 6" dia.(see page 17)• Increase leverage

5x for faster cutting

• Safely secure thesaw while cutting


Reciprocating Saw Blades and Accessories (see page 13)




Shown with side handle

Selector switch forstraight or orbital stroke

REC

IPRO

CA

TIN

G S

AW

S


Subsea, mining, utility and construction applications

The FOXmini hacksaws –

industry's most powerfulelectric recip saws!

Single Speed

5 6002 0000

Variable Speed

5 6002 6000**

5 6002 7000**

* 220 Volt also available ** 5 6002 6000 with speed control dial, 5 6002 7000 with variable-speed trigger.

9.5 Amp, 110V*

12 Amp, 110V*

9.5 Amp, 110V*

Power

2200

0-2200

0-2200

Strokesper Min.

StrokeLength

11/8"

11/8"

11/8"

Spade

Spade

D-handle

19"

19"

19"

Handle Style

6

6

6

Length Weight(lbs.)Model No.

Model 5 6002 7000 with D-handle variable-speed trigger.

Models 5 6002 0000 and 5 6002 6000with spade handle. Model 5 6002 6000has variable-speedcontrol dial.

Hydraulic Reciprocating SawHydraulic Reciprocating Saw

• Cut steel pipe and channel 1/2" to 4" dia., plastic pipe to 8" dia.

• Powerful 9.5 and 12 Amp motors, 110 Volt/60Hz (or 220 Volt/50Hz)

• Ideal for plumbing and electrical contractors as well as demolitionjobs, pallet cutting and more

• 11/8" blade stroke for fast cutting

• 0-2200 variable stroke speed for models 5 6002 6000 and 5 6002 7000

Reciprocating Saw Blades and Accessories (see page 13)




Standardequipmentincludes 2"pipe clamp(#259 983),

carrying caseand two No.1001 blades

Accept universalsaw blades orthicker, heavy-

duty double-tangsaw blades (see

page 13)

Motor PowerOil PressureOil FlowStrokes per Min.WeightHydraulic ConnectionHose ID*

* Hoses are not included

2 HP2000 PSI

6 GPM (up to 13)1700

13.2 lbs. M 18 x 1.5 Female

1/2" ID with 1/2" FF Couplings

Model 5 1219 0010

• Marine, mining, utility andconstruction applications

• Operate on 2000 PSI / 6 GPM(up to 13 GPM) hydraulic oil

• Cut wood up to 6" dia., metalup to 3/4" dia.


Electric Reciprocating SawElectric Reciprocating Saw

The SHARK


REC

IPRO

CA

TIN

G S

AW

BLA

DES

13

Reciprocating Saw BladesReciprocating Saw BladesSuper quick and precise for pipe, steel, plastic, etc.**Use ProLube™ Specialty Lubricants with your Reciprocating Saw Blades to help your tools

work cooler, longer and more efficiently. ProLube Lubricants are non-toxic and ideal forstainless steel and hard metal cutting applications. See pages 17 and 33 for details.**

No. 1001No. 1002No. 007D/200** 007D/200 has universal 1/2" tang • Ask for special blades to cut stainless steel.

Cuts pipe up to 2"Cuts pipe up to 4"Cuts pipe up to 4"

8 TPI8 TPIM-Tooth

6" L x 1" W x .060" T8" L x 1" W x .060" T8" L x 1" W x .050" T

Extra-thick Blades for 90˚ Cutting with a Pipe Clamp, Double Shank*

General-purpose Bi-metal Saw Blades with Universal 1/2" Shank

No. 007/150No. 007/200No. 007/280

Metal 1/8" and ThickerM-ToothM-ToothM-Tooth

6" L x 3/4" W x .035" T8" L x 3/4" W x .035" T12" L x 3/4" W x .035" T

No. 006/150No. 006/250

Metal up to 1/8" ThickM-ToothM-Tooth

6" L x 3/4" W x .035" T8" L x 3/4" W x .035" T

Cast Steel, Ductile Iron, Ceramics and Glass Fiber ProductsNo. D12/200 Tungsten Carbide Coarse 8" L x 3/4" W

No. 1005No. 1003No. 1004

10/14 TPI10/14 TPI10/14 TPI

6" L x 1" W x .035" T8" L x 1" W x .035" T12" L x 1" W x .035" T

Heavy-duty HSS-Bi-metal Blades for Freehand Sawing, Double Shank

Made of tough, resilient steel with 10/14 variable tooth pitch. The large blade width and double-shank mountdeliver excellent cutting performance and durability.

Mega Sharp M-Tooth Saw Blades for Freehand Cutting with Standard 1/2" Shank

CUTS TWICE AS FAST!M42 Bi-metal for cutting steel and stainless steel

The patented M-Tooth sawblade cuts 2x faster than ordinaryblades. The teeth are designedto cut on the forward and backstrokes, thereby saving time.

Cuts inBoth Directions!

No. 3013/150No. 3013/200No. 3018/280

Metal 1/8" and Thicker14 TPI14 TPI10 TPI


No. 3021/150No. 3021/225No. 3021/300

Plastic, Wood, Plasterboard6 TPI6 TPI6 TPI


No. 810C/150No. 810C/225

All Woods with Steel (i.e. Embedded Nails)8/10 TPI8/10 TPI

6" L x 3/4" W x .035" T9" L x 3/4" W x .035" T

Metal up to 1/8" ThickNo. 3014/150 18 TPI 6" L x 3/4" W x .035" T

Metal up to 1/8" Thick (for Curved Cuts)No. 3017/90 18 TPI 35/8" L x 5/16" W x .035" T

PORT

ABL

E H

AC

KSA

WS


Portable Hacksaws for Tough DutyPortable Hacksaws for Tough DutyOn-site cutting of pipe up to 30" OD and structural steel

Pneumatic • Electric • Hydraulic

CS Unitec's power hacksaws offer a wide rangeof options for portable cutting of pipe, structuralsteel, tanks and other materials. Our saws aredesigned for the toughest service in refineries,power plants, utilities, offshore oil, constructionand demolition applications and are ideal forshutdowns and turnarounds in process pipingindustries. CS Unitec's pneumatic saws aresafer than cutting with a welding torch inhazardous areas or confined spaces.

• Compact size, ideal for cutting in confined spaces• 2 3/8" blade stroke• Pipe clamps for 90˚ cutting of up to 30" OD pipe• Profile clamps for structural steel• Wide variety of blades and accessories for

cutting steel, stainless steel, aluminum, plastic,wood and ductile iron

• Optional blade guide to ensure right-angle cuts• Automatically cut pipe with our optional self-

feeding, pneumatic-powered pipe clamp system

Heavy-duty sawblades from 8" to 37" long

HSS, HSS-SL,and carbide-coatedbladesavailable(see page 19)

Pneumatic, electricor hydraulic motor

Twist or lever throttle

Optional saw blade guidefor added blade stability –ensures straight cutting!

Two sizes available (Not required – see page 18)

Assorted pipe clamps forpipes up to 30" OD or profileclamps for structural steel(see pages 17-18)

Manual or automatic feed

Pneumatic: 3/4" NPT ConnectionElectric: 110 Volt (220V available)Hydraulic: 1/2" FF (HTMA) Couplings

PORT

ABL

E H

AC

KSAW

S


Portable Pneumatic Power HacksawsPortable Pneumatic Power HacksawsPneumatic power for hazardous environments

• HSS (High-speed Steel), HSS-SL(for stainless steel and hard metal)and Carbide Coated

Accessory Saw Blades(see page 19)

Pneumatic - 3/4" ID NPT Air Connection

5 1212 0010*

5 1212 0050*

* Carrying case not included with air models – for optional carrying case, order accessory No. 5 1212 9000

1.5 HP

1.5 HP

Power

Roll

Lever

Air Consumption: 51 CFM

Air Pressure: 90 PSI

Throttle Motor Specifications

2 3/8"

2 3/8"

BladeStroke

15.4

15.4

Weight(lbs.)

100-350

100-350

Strokesper Min.

1/2" ID1/2" ID

HoseModelNo.

• Pneumatic motor with variable speeds

• Ideal for cutting pipe, tanks, structuralsteel, profiles and other materials

• Designed for the toughest service inrefineries, chemical plants, utilities,pipelines,construction,offshore oil anddemolitionapplications

• Cut pipe up to 30"OD in one pass

• Chain clamps and profile clampsavailable for accurate 90˚ cutting of pipeand structural steel

• 2 3/8" stroke for heavy-duty cutting

• Ideal for cutting in confined spaces

• Accommodate heavy-duty blades up to37" long

• Optional saw blade guides to increaseblade stability (see page 18)

• Pneumatic pipe clamp system availablefor automatically cutting pipe; easilyattaches to pneumatic hacksaw andshares same air supply (see accessoryNo. 5 1208 9980 on page 18)

Throttle Types for Pneumatic Saws:Roll Throttle(air model 5 1212 0010 only) –used only with automatic feedpipe clamp (see page 18)

Lever Throttle(model 5 1212 0050) – provideson/off paddle switch for manualcutting with clamp

Pipe Capacity30" OD

Profile Capacity21 3/4" h x 11 1/2" w

Clamps for Pipes and Profiles – manual andautomatic-feed clamps for straight, 90˚ cuttingof pipes and profiles (see pages 17-18)

Carrying Case for Pneumatic Hacksaws –Optional metal carrying case for 5 1212 0010 and5 1212 0050 – order accessory No. 5 1212 9000.

ClampsManual Automatic

Model 5 1212 0050 with lever throttlePneumatic

3/4" NPT Air Connection


ATEX Classified for Ex Zone EX II 2 GcT5


PORT

ABL

E H

AC

KSA

WS

16

Portable Power HacksawsPortable Power HacksawsElectric and hydraulic power

Model 5 1215 0070with variable speedElectric

Model 5 1220 0050with lever throttleHydraulic

11 Amps / 110 Volt (220 Volt Available)

1/2" FF Couplings

• HSS (High-speed Steel), HSS-SL(for stainless steel and hard metal)and Carbide Coated

AccessorySaw Blades(see page 19)

Electric - 11 Amps / 110 Volt**

5 1215 0070*

Hydraulic - 1/2" FF (HTMA) Couplings

5 1220 0050

* Model 5 1215 0070 has an electronic speed control dial. **Also available as 220 Volt/50 Hz

1.5 HP

3.8 HP

Power

Trigger

Lever

110V/60 Hz (220V/50Hz is available)

Oil Flow: 4 GPM at 2000 PSI

Throttle Motor Specifications

2 3/8"

2 3/8"

BladeStroke

13

13.5

Weight(lbs.)

200-400

100-500

Strokesper Min.

Cable

1/2" ID

HoseModelNo.

• Electric or hydraulic motor with variable speeds

• Ideal for cutting pipe, tanks, structural steel, profiles andother materials

• Designed for the toughest service inrefineries, chemical plants, utilities,pipelines, construction, offshore oiland demolition applications

• Cut pipe up to 30" OD in one pass

• Chain clamps and profile clampsavailable for accurate 90˚ cutting of pipe and structuralsteel

• 2 3/8" stroke for heavy-duty cutting

• Ideal for cutting in confined spaces

• Accommodate heavy-duty blades up to 37" long

• Optional saw blade guides to increaseblade stability (see page 18)

• Automatic-feed pipe clamp system availablefor automatically cutting pipe – saves operator time andmakes work easier(see accessory No. 5 1208 9990 on page 18)

Pipe Capacity30" OD

Profile Capacity21 3/4" h x 11 1/2" w

Clamps for Pipes and Profiles – manual andautomatic-feed clamps for straight, 90˚ cuttingof pipes and profiles (see pages 17-18)

ClampsManual Automatic


HA

CKS

AW

AC

CES

SORI

ES

17

Hacksaw AccessoriesHacksaw Accessories

• Extend capacity of pipe clamps up to 24" ODModel No. 5 1201 9010 – 17 3/4" chain extension

Model No. 5 1201 9030 – 39 3/8" chain extension(two of these chains allows pipe clamp Nos. 5 1202 9950, 5 1202 9960, 5 1208 9980 and 5 1208 9990 to fit 30" OD pipe)

Model No. 5 1202 99604" to 12 3/4" OD pipe clamp – manualtightening of chain*

Model No. 5 1202 99504" to 12 3/4" OD pipe clamp – lever lockprovides no-tools tightening of chain*

* up to 24" OD with one extension chain;up to 30" with two extension chains –see Part No. 5 1201 9030 shown below

Model No. 5 1207 99102" to 6" OD pipe clamp

Model No. 5 1207 897021 5/8" x 11 3/8" profile clamp

Clamps for Pipes and ProfilesClamps for Pipes and Profiles

Large Pipe Clamp,Model 5 1202 9960

Small Pipe Clamp,Model 5 1207 9910

Up to 6"pipe dia.

Lever Lock AssemblyPart No. 5 1202 9970Can be used to retrofit manual clamp 5 1202 9960for no-tools tightening of chain. Also fits similar clamps.

Ensure 90˚ cuts through pipe and profiles

Heavy-duty cutting of pipe and structural steel

Extension Chains for Pipe ClampsExtension Chains for Pipe Clamps

Profile Clamp,Model 5 1207 8970

Cutting tools work cooler, longer and more efficientlywith ProLube™ Lubricants from CS Unitec.• Improve cutting tool output and performance• Prolong tool life by reducing friction and wear• Unique composition provides excellent adhesion

to cutting tools for maximum lubrication• Corrosion inhibitor• Ideal for saw blades

and drill bits• Non-toxic

ProLube™ProLube™ Lubricants ideal for cuttingsteel, stainless steel and hard metals

ProLube SolidCS 7020-0131.6 oz. push tubeCS 7020-00014.5 oz. push tube

High film strength – stays onfor the cut!

ProLube LiquidWater soluble 16:1CS 7010-504 1 gal. bottle

ProLube PasteCS 7030-712 12 oz. tub


HA

CKS

AW

AC

CES

SORI

ES

18

Hacksaw AccessoriesHacksaw AccessoriesAutomatic feed pipe clamps save time and effort

Model No. 5 1208 9980 – Automatic Clamp• Save time and effort by automatically cutting pipe

up to 12 3/4" OD (up to 30" OD with extensionchains – see page 17)

• Self-feeding device saves operatortime, increases safety and makes workeasier

• Easily attaches to CS Unitec air hacksaw andshares same 90 PSI air supply (Pipe clamp foruse only with CS Unitec air hacksaw Model No.5 1212 0010)

• Blade guide for straight cutting through pipe anddifficult materials is optional (see below)

Model No. 5 1208 9990 – Automatic Clamp• Save time and effort by automatically cutting pipe up to 12 3/4" OD

(up to 30" OD with extension chains – see page 17)

• Self-contained gas cylinder providesconstant feed pressure to saw blade

• Saves operator time, increases safetyand makes work easier

• Easily attaches to CS Unitec electrichacksaw 5 1215 0070 or hydraulichacksaw 5 1220 0050

• Optional blade guide for straight cuttingthrough pipe and difficult materials (seebelow)

Self-feeding Pipe Clamp for Electric and Hydraulic SawsSelf-feeding Pipe Clamp for Electric and Hydraulic Saws

Blade GuidesBlade Guides

• Ensure straight cutting through pipe and difficult materials

Model No. 5 1207 9970 for pipes up to 13" (20" min. blade length required)

Model No. 5 1207 8910 for pipes up to 21" (30" min. blade length required)

Optional guides with two roller bearings

Air-PoweredClamp

Self-FeedingMechanicalClamp

Model No. CP1 – Universal Clamp• Self-aligning feet adjust to the form of the workpiece

(round, square and angled)

• Accommodates 1/2" to 123/4" OD [up to 24" ODwith extension chain No. CP1/10 (393/8" long)]

Clamps for Pipes and ProfilesClamps for Pipes and Profiles

Self-feeding Pipe Clamp for Pneumatic SawsSelf-feeding Pipe Clamp for Pneumatic Saws


HA

CKS

AW

BLA

DES

19

Hacksaw BladesHacksaw Blades - 8" up to 37" long

Z22-9 HSSZ22-10 HSSZ22-11 HSS

Z22-6 HSSZ22-6 HSS-SL*Z22-6 CarbideZ22-31 HSSZ22-71 HSS

Z22-7 HSSZ22-7 CarbideZ22-29 HSSZ22-32 HSSZ22-33 HSS

Z22-72 HSSZ22-72 Carbide

Z22-30 HSSZ22-30 HSS-SL*Z22-40 HSS

Z22-73 HSSZ22-73 CarbideZ22-74 HSS

Z22-75 HSSZ22-75 HSS-SL*Z22-76 HSS

Z22-37 HSS

Heavy-duty cutting of pipe and structural steel

*Use HSS-SL Blades for best cuttingperformance on stainless steel and hard metal.

HSS or HSS-SL Saw Blade Shown

Order No. Steel andNonferrous Metal

Plasticand Wood

Ductile/Cast Ironand Masonry

Max. Dia.of Cut

DimensionsLength Teeth/Inch Thickness

8"

8"

8"

12"

12"

12"

12"

12"

16"

16"

16"

16"

16"

20"

20"

21"

21"

21"

24"

24"

24"

30"

30"

30"

37"

8

16

24

16

16

Coated

12

4

16

16

8

4

6

14

Coated

12

12

4

14

Coated

8

12

12

6

12

Steel/Aluminum

Steel

Sheet Metal

Steel

Stainless Steel

–

Steel

–

Steel

–

Steel/Aluminum

–

Cast Iron

Steel

–

Steel

Stainless Steel

–

Steel

–

Steel/Aluminum

Steel

Stainless Steel

Plastics/Wood

Steel

Plastics

–

–

–

–

–

–

Plastics/Wood

–

–

Plastics

Plastics/Wood

Plastics

–

–

–

–

Plastics/Wood

–

–

Plastic

–

–

–

–

–

–

–

–

–

Masonry

–

–

–

Masonry

–

–

Cast Iron

–

Masonry

–

–

–

–

Masonry

–

–

–

–

–

1/16" 1/16"1/16"1/16"1/16"3/16"1/16"1/16"1/16"1/16"1/16"1/16"1/16"5/64"3/16"1/16"1/16"1/16"5/64"3/16"5/64"5/64"5/64"5/64"

5/64"

31/8"

31/8"

31/8"

65/8"

65/8"

65/8"

65/8"

65/8"

105/8"

105/8"

105/8"

105/8"

105/8"

145/8"

145/8"

155/8"

155/8"

155/8"

181/2"

181/2"

181/2"

247/8"

247/8"

247/8"

317/8"

Use ProLube™ Specialty Lubricants with Hacksaw Blades to help tools work cooler, longer and more efficiently. ProLube Lubricants are non-toxic and ideal for stainless steel and hard metal cutting applications. See page 17.

Extra thick for 90˚ cutting

PORT

ABL

E BA

ND

SA

WS


Portable Band SawsPortable Band SawsFast, on-site cutting of

pipe and other materialsPneumatic • Electric • Hydraulic

Power for a wide range of industries

• Ideal for the toughest use in refineries,chemical plants, gas utilities,construction, offshore oil, mining,marine and demolition industries

• Fast, deep cutting of pipe, conduit,bolts, cable, angle iron, structural steel,chain and more

• Cut steel, stainless steel, Inconel,chrome, Hastelloy, aluminum, copper,iron, fiberglass, plastics, wood and more

p. 21

p. 22

p. 21

p. 22

4 3/4" Electric Band Saw

43/4" and 7" Deep Throat™and 9" Wide Mouth™

Hydraulic Band Saws

7" Deep Throat™ AirBand Saw9" Wide Mouth™ AirBand Saw

7" Deep Throat™ Electric Band Saw9" Wide Mouth™ Electric Band Saw

Band Saw AccessoriesWe also offer a full line of Band Saw bladesand accessories, including vise clamps forstraight cutting. See page 23.

4 3/4" AirBand™ Saw

p. 22




PORT

ABL

E BA

ND

SA

WS

21

• Fast, on-site cutting

• Safer in hazardous atmospheres than electric saws

• Ideal for process shutdowns and turnarounds

• Reduces need for "hot work permits"

• No fear of electric shock or blown circuitry in wet environments

• AirBand™ models with aluminum housing cut up to 43/4" OD

• Deep Throat™ models with planetary gearbox cut up to 7" OD

• Wide Mouth™ models with planetary gearbox cut upto 8" OD

Vise Clamp for Straight CuttingSecurely clamp to round, square andangular materials for accurate cutsModel No. 5 6030 9000Clamp-on vise for 4 3/4" Band Saw

Model No. 5 6031 9400Clamp-on vise for 7" Band Saw

See page 23 for more information.

Pneumatic Portable Band SawsPneumatic Portable Band Saws

AirBand™

5 6003 0010

Deep Throat™ AirBand

5 6031 0010

Wide Mouth™ AirBand

5 6062 0010

0.7 HP, 90 PSI,20 CFM

1.3 HP, 90 PSI,43 CFM

1.3 HP, 90 PSI,43 CFM

Motor Powerand Specs.

2.2-3.3Variable

4.0-4.9Variable

4.0-4.9Variable

BladeSpeed(ft/sec)

447/8"x 1/2"

66"x 5/8"

71"x 5/8"

BladeSize

Aluminum

StainlessSteel

StainlessSteel

Housing

211/2"

283/4"

303/4"

OverallLength

1/4" NPT(ID)

1/2" NPT(ID)

1/2" NPT(ID)

AirConnec-tion

14

28

35

Wgt.(lbs.)

3/8"

1/2"

1/2"

AirHose

41/2" x 43/4"

7" x 7"

9" x 8"

Rectangular

43/4"

7"

8"

Round

CapacityModel No.

AirBand™ Model 5 6003 00104 3/4" OD cutting capacity

ATEX Classified for Ex Zone 2

Ideal for hazardous atmospheres and wet environments

Deep Throat™ AirBandModel 5 6031 0010 – 7" OD cutting capacity

ATEX Classified for Ex Zone 2

7"Cutting Capacity



• Ideal for plumbing and mechanical contractors,as well as demolition and plant maintenance

• Heavy-duty variable-speed motorsoperate on 110VAC; 220V available

• Standard models withaluminum housing cut up to 43/4" OD

• Deep Throat™ models withstainless steel housing andplanetary gearbox cut up to 7" OD;Wide Mouth™ models cut up to 8" OD

Hydraulic Band Saws• Heavy-duty mining, utility, marine and construction applications• Operate on 2000 PSI / 4 GPM (up to 13 GPM) hydraulic oil• Standard models cut up to 43/4" OD• Deep Throat™ models with planetary gearbox cut

up to 7" OD; Wide Mouth™ models cut up to 8" OD• 1/2" Flush-face (HTMA) couplings and hoses are included

Electric Model 5 6046 0010

Electric Deep Throat™ Model 5 6040 0010cuts a section of rail

Electric

5 6046 0010

Deep Throat™ Electric

5 6040 0010

Wide Mouth™ Electric

5 6079 0020

6 Amp110VAC

6 Amp110VAC

6 Amp,110VAC

Motor Powerand Specs.*

3.0-7.4Variable

2.0-4.9Variable

2.0-4.9Variable

BladeSpeed(ft/sec)

447/8" x 1/2"

66" x 5/8"

71" x 5/8"

Blade Size

Aluminum

StainlessSteel

StainlessSteel

Housing

211/2"

283/4"

303/4"

OverallLength

14

28

34

Weight(lbs.)

41/2" x 43/4"

7" x 7"

9" x 8"

Rectangular

43/4"

7"

8"

Round

CapacityModel No.

Hydraulic - 1/2" FF (HTMA) Couplings

5 6043 0010

Deep Throat™ Hydraulic - 1/2" FF (HTMA) Couplings

5 6041 0010

Wide Mouth™ Hydraulic - 1/2" FF (HTMA) Couplings

5 6054 0010

1.6 HP, 2000 PSI,4 GPM

1.6 HP, 2000 PSI,4 GPM

1.6 HP, 2000 PSI,4 GPM

Motor PowerSpecs.

4.2

4.2

4.2

BladeSpeed(ft/sec)

447/8" x 1/2"

66" x 5/8"

71" x 5/8"

Blade Size

StainlessSteel

StainlessSteel

StainlessSteel

Housing

22"

283/4"

303/4"

OverallLength

23

28

35.6

Weight(lbs.)

41/2" x 43/4"

7" x 7"

9" x 8"

Rectangular

43/4"

7"

8"

Round

CapacityModel No.

PORT

ABL

E BA

ND

SA

WS

22

Electric and Hydraulic Portable Band SawsElectric and Hydraulic Portable Band SawsConstruction, utility, marine and demolition applications

Electric Band Saws – Fast, on-site cutting

1/2" FFCoupling


No. 9 2506 0010

No. 9 2506 0020

No. 9 2506 0030

No. 9 2506 0040

Blades for standard saws (Model Nos. 5 6003 0010, 5 6046 0010 and 5 6043 0010)

18 TPI

14 TPI

10/14 TPI*

8/12 TPI*

* Variable tooth pitch (10/14 TPI and 8/12 TPI) saw blades cut faster and last longer than standard pitchblades. Varying tooth size and gullet depth reduce harmonic vibration for quieter, more efficient cutting.

Cuts material 1/8" - 1/4" thick



Cuts material 1/2" and thicker

447/8" L x 1/2" W x .025" T

447/8" L x 1/2" W x .025" T

447/8" L x 1/2" W x .025" T

447/8" L x 1/2" W x .025" T

No. 9 2506 0220

No. 9 2506 0230

No. 9 2506 0240

No. 9 2506 0200

14 TPI

10/14 TPI*

8/12 TPI*

8 TPI





66" L x 5/8" W x .025" T

66" L x 5/8" W x .025" T

66" L x 5/8" W x .025" T

66" L x 5/8" W x .025" T

Blades for Deep Throat™ saws (Model Nos. 5 6031 0010, 5 6047 0010 and 5 6041 0010)

M42 Cobalt Steel SuperBand™ Saw Blades

CS Unitec's SuperBand™ saw blades are made of tough M42 steel.8% cobalt gives our blades the highest heat resistance and wearresistance of all portable band saw blades. The hardness is Rc 67-69.

SuperBand™ saw blades easily cut most ferrous and nonferrousmetals, including steel, stainless steel, Inconel, chrome, Hastelloy, toolsteels, "super" alloys and other materials. Longer life, fewer bladechanges and the fastest cutting rates result in SuperBand™ providingthe lowest cost per cut.

• Securely clamp to round, square and angular materialsfor straight cutting

• Easily attach to CS Unitec Portable Band Saws

Vise Clamps for Accurate CutsVise Clamps for Accurate Cuts

PORT

ABL

E BA

ND

SA

W B

LAD

ES A

ND

AC

CES

SORI

ES

23

Band Saw Blades and AccessoriesBand Saw Blades and Accessories

Model 5 6031 9400with Band Saw

Model No. 5 6030 9000Clamp-on vise for 4-3/4" Band Saws(model numbers 5 6003 0010, 5 6046 0010 and 5 6043 0010)Maximum material size – rounds: 43/4"; squares: 41/2"; angles: 41/2"

Model No. 5 6031 9400Clamp-on vise for 7" Deep Throat™ Band Saws(model numbers 5 6031 0010, 5 6041 0010 and 5 6047 0010)Maximum material size – rounds: 7"; squares: 5"; angles: 5"

No. 9 2506 0350

No. 9 2506 0340

No. 9 2506 0330

10/14 TPI*

8/12 TPI

6/10 TPI




71" L x 5/8" W x .025" T

71" L x 5/8" W x .025" T

71" L x 5/8" W x .025" T

Blades for Wide Mouth™ saws (Model Nos. 5 6062 0010, 5 6099 0020 and 5 6054 0010)

447/8"

66"

71"

• More cutting efficiency with less down time –stays sharp 25x longer and lasts 10x longerthan regular-life saw chains

• Efficiently cuts tough materials, includingplastics, railroad ties, utility poles,hardwoods and soft masonry materials

• Withstands severe cutting conditions thatinclude sand, mud, salvage work, etc.

• Easily resharpened

• Available in 10", 15", 17", 21" and 25" lengths

Guide Bars for wood andplastics also available. ContactCS Unitec for more information.

Also available: Super Chisel and Ripping sawchain in 10", 15", 17", 21" and 25" lengths

Carbide-tipped Saw ChainCarbide-tipped Saw Chain

Close-up of Carbide-tipped Chain


Powerful, efficient cutting of wood and plasticUsed successfully for many years in polyethylene plants,petrochemical industries, utilities, undergroundmines and marine applications

PNEU

MA

TIC

CH

AIN

SA

WS

24

4 HP Pneumatic Chain Saw4 HP Pneumatic Chain Saw

• Pneumatic power is safer thangas or electric in hazardousatmospheres and wetenvironments, includingunderwater applications

• Low maintenance and easystartup – saw chain and motor areautomatically oiled by two separate lubricatingsystems

• Powerful 4 HP motor at 90 PSI air pressure, 92 CFM• Chain guard to protect operator• Available with 15", 17", 21" and 25" cutting capacity• .404 pitch Super Chisel saw chain is standard• Carbide-tipped and Ripping saw chain are optional

Model 5 1007 004025" cutting capacity

For General Use5 1007 00035 1007 00105 1007 00205 1007 0040

For Underwater Use*5 1008 00305 1008 0040

* Pneumatic Chain Saw with 17" cutting capacity is also available for underwater applications.

4 HP

4 HP

4 HP

4 HP

4 HP

4 HP

15"

17"

21"

25"

21"

25"

29"

33"

37"

41"

37"

41"

22

25

28

31

29

31

3/4" NPT (ID)3/4" NPT (ID)3/4" NPT (ID)3/4" NPT (ID)

3/4" NPT (ID)3/4" NPT (ID)

5/8"5/8"5/8"5/8"

5/8"5/8"

90

90

90

90

90

90

92

92

92

92

92

92

Power CuttingCapacity CFMPSI Length

with BarWeight(lbs.)

AirConnection Hose ID

ModelNo.

Series5 1008:

Underwaterchain saw withexhaust valve

Air Tool Line Conditioner for underwater air tools todisplace moisture. Developed to inhibit rust and corrosion

of air motors. 1 quart/liter, order part number MS 9105.


• Ideal all-purpose air chain saw – compact,lightweight and powerful

• Only 5.4 lbs., 10" capacity• Ideal for utilities, mines, construction and agriculture

Also available: Chain Saw Extension Rod toextend saw reach to 7'. Trigger on handle allowsaccurate control of speed. Part No. 0165.0922.

Motor PowerCutting CapacityPSICFMLengthWeightAir Connection

1.2 HP10"903021"

5.4 lbs.1/4" NPT (ID)

Model 5 1005 0010

Utility Pneumatic Chain SawUtility Pneumatic Chain SawPN

EUM

ATI

C C

HA

IN S

AW

S A

ND

AC

CES

SORI

ES

25

4 HP Pneumatic Chain Saw with Brake4 HP Pneumatic Chain Saw with Brake

Model 5 1005 001010" cutting capacityIncludes built-inchain oiler

• Pneumatic power is safer than gas or electric inhazardous atmospheres and wet environments,including underwater applications

• Low maintenance and easy startup – saw chain and motor areautomatically oiled by two separate lubricating systems

• Powerful 4 HP motor at 90 PSI air pressure, 92 CFM

• Chain brake for stopping chain movement duringkickback or repositioning of saw duringcutting

• 5 1027 series plastic-cutting chain sawscome with integrated water feed

• .404 pitch Super Chisel sawchain is standard

• Carbide-tipped and Ripping saw chain are optional

For Cutting Wood, with brake5 1026 00105 1026 00205 1026 0040

For Cutting Plastic, with brake and water feed system5 1027 00105 1027 00205 1027 0040

For Underwater Use, with brake5 1028 00105 1028 00205 1028 0040

For Underground/Coal Mining Use, with brake5 1029 00105 1029 00205 1029 0040

4 HP

4 HP

4 HP

4 HP

4 HP

4 HP

4 HP

4 HP

4 HP

4 HP

4 HP

4 HP

17"

21"

25"

17"

21"

25"

17"

21"

25"

17"

21"

25"

33"

37"

41"

33"

37"

41"

33"

37"

41"

33"

37"

41"

25

28

31

25

28

31

25

28

31

25

28

31

3/4" NPT (ID)3/4" NPT (ID)3/4" NPT (ID)



3/4" NPT (ID)3/4" NPT (ID)3/4" NPT (ID

5/8"5/8"5/8"

5/8"5/8"5/8"

5/8"5/8"5/8"

5/8"5/8"5/8"

90

90

90

90

90

90

90

90

90

90

90

90

92

92

92

92

92

92

92

92

92

92

92

92

Power CuttingCapacity CFMPSI Length

with BarWeight(lbs.)

AirConnection Hose ID

ModelNo.

Series 5 1026, 5 1027, 5 1028 and 5 1029Pneumatic chain saw with brake.

Available with 17", 21" and 25"cutting capacity



HYD

RAU

LIC

CH

AIN

SA

WS

Hydraulic Chain Saws

26

Hydraulic Chain SawsVersatile, lightweight saw for utility and maintenance

• Up to 6 HP, high-torque gear motor

• Open/closed hydraulic system

• Pistol grip with safety trigger lockand insulated handle

• Patented spool system eliminates heatgeneration, for safer operation

• Ideal for use in utilities, mines, constructionand agriculture

• Pole saw models ACS-70 and ACS-80 featurenon-conductive fiberglass pole for long reach(overall lengths: ACS-70 - 6.5'; ACS-80 - 7.5')

• Models ACS-70 and ACS-80 approved forlive line work

• Optional hose swivel to eliminate tangledhoses (see below)

Motor PowerHandleMotor Specifications

Overall Length (w/bar)Bar LengthWeightHose Connection

*For 14" bar, order no. ACH000-14; for 16" bar, order no. ACH000-16

Up to 6.5 HPPistol GripOil Flow:

3-8 GPM @ 2000 PSI23"

12" (14" and 16" optional)5.8 lbs.

3/8" JIC 37˚

Model ACH000-12 - Pistol Grip Saw

Motor PowerHandleMotor Specifications

Overall Length (w/bar)Bar LengthWeightHose Connection

*For 7.5 ft. overall length, order no. ACS-80

Up to 6.5 HPPistol GripOil Flow:

3-8 GPM @ 2000 PSI77"

12" (14" and 16" optional)8.8 lbs.

3/8" JIC 37˚

Model ACS-70 - Pole Saw

Optional 360˚ Hydraulic Hose Swivel(Part No. 640080)• In-line, 2-hose hydraulic swivel• Tools can be twisted 360˚ withouttangling hoses

• Pressure balancedfor optimal performance,even at fullworking pressure

• Fits 1/4" and 3/8" hydraulic hose

Model ACH000Pistol Grip Saw(above/right)

Model ACS-70Pole Saw withoptional 360˚

HydraulicHose Swivel(above/right)


PNEU

MA

TIC

UTI

LITY

SA

W

27

PowerGrit Air Utility SawPowerGrit Air Utility Saw Cut ductile iron pipe underground with minimal excavation

6’

5’

2.5’

4.6’

• Ideal for utility, commercial infrastructure, fire &rescue, construction and underwater applications

• Cut ductile iron (D. I.) pipe• Patent-pending chain design with brazed layer

diamond coating• 15" and 20" bar length available• Single side access to pipe• Reduced excavation, labor time and operator effort• Improved control and operator safety• Can cut concrete by changing bar, sprocket and

chain – see page 30

The PowerGrit system allowsthe user to perform the entire

cut from one position - a featureespecially helpful in reducingthe amount of excavation

required in underground cuts. Conventional Cut-off Saw PowerGrit System

PowerGrit Pipe Clamp – Order No. PG 56-996012" capacity. Developed for use in underground pipe applications for

safety, accuracy and ease of use. Solid, stable cutting platform thatimproves operator safety and cut precision in all applications.

PG 52-3810

PG 53-5080

PG 56-9960

Order no.

PowerGrit Accessories

Description

15" PowerGrit Chain

20" PowerGrit Chain

PowerGrit Pipe Clamp(12" cap.; includes mounting axle)

CS 536163-PG2*

CS 536163-PG3**

*For 15" PowerGrit Saw and Pipe Clamp – order no. CS 536163-PG2C **For 20" PowerGrit Saw and Pipe Clamp – order no. CS 536163-PG3C

6.5 HP

6.5 HP

Power

124 CFM @ 90 PSI (6 bar)

124 CFM @ 90 PSI (6 bar)

32

33

104

104

88 dB

88 dB

Motor Specifications

5700 RPM

5700 RPM

No LoadSpeed

Weight w/Bar andChain

No LoadTorque(in.-lbs.)

NoiseLevelat 3 ft.

15"

20"

Max.Depthof Cut

Model No.

Pneumatic PowerGrit Chain Saw


CO

NC

RETE

CH

AIN

SA

WS

28

Concrete Chain SawsConcrete Chain SawsCut through walls, floors and columns in a single pass

• Specifically designed for the demanding requirementsof professional sawing and drilling contractors

• Now with AirFORCE F4™ Diamond chain – optimizedfor use with CS Unitec concrete chain saws

• Deep plunge cuts – up to 20" deep

• Square corners up to 19" with no overcuts

• Cut mechanical openings and irregular shapes

• Easily cut through reinforced concrete, brick, block,concrete pipe and natural stone

• Durable industrial finish on die-cast aluminum bodystands up to harsh environments

• Built-in Wallwalker provides leverage advantage tomake cutting easier

Optimized for pneumatic andhydraulic chainsawing

Model CS 536163-26.5 HP Air Motor

Pneumatic • Hydraulic

CS Unitec Offers 2 Types ofConcrete Chain Saws to MeetYour Cutting Requirements:

CS 536163 Pneumatic• High torque output for tough

cutting jobs

• Powerful 6.5 HP air motor

• No gas or engine fumes – ideal for confined spacesand indoor use

• Noise level: 88 dB at 3 feet (approx. 1 meter)

• Weight: 29 lbs. (without bar and chain)

CS 526822 Hydraulic• Dependable, powerful

11 HP motor

• Hydraulic power for heavy-dutymining, utility, marine and construction applications

• Weight: 25 lbs. (without bar and chain)

Please see page 30 forConcrete Chain SawAccessories, including:

• Diamond Chains• Guide Bars• SpeedHook®

• And More!

Plunge cut up to 20" deep!

AirFORCE F4™

Diamond Chains


CO

NC

RETE

CH

AIN

SA

WS

29

CS 536163-1

CS 536163-2

CS 536163-3

CS 526822-1

CS 526822-2

CS 526822-3

6.5 HP

6.5 HP

6.5 HP

11 HP

11 HP

11 HP

Power

124 CFM @ 90 PSI (6 bar)

124 CFM @ 90 PSI (6 bar)

124 CFM @ 90 PSI (6 bar)

8 GPM @ 2500 PSI (172 bar)

8 GPM @ 2500 PSI (172 bar)

8 GPM @ 2500 PSI (172 bar)

32

33

34

28

29

30

104

104

104

95

95

95

88 dB

88 dB

88 dB

88 dB

88 dB

88 dB

Motor Specifications

5700 RPM

5700 RPM

5700 RPM

5700 RPM

5700 RPM

5700 RPM

No LoadSpeed

Weight w/Bar andChain

No LoadTorque(in.-lbs.)

NoiseLevelat 3 ft.

10"

15"

20"

10"

15"

20"

Max.Depthof Cut

Model No.

Concrete Chain SawsConcrete Chain SawsRugged construction for demanding applications

Pneumatic Concrete Chain Saw

Hydraulic Concrete Chain Saw

Above: OptionalSpeedHook ® guidessaw for straightcutting (see page 30).

Model CS 52682211 HP Hydraulic Motor

Optimized for pneumatic andhydraulic chainsawing

AirFORCE F4™

Diamond Chains

CO

NC

RETE

CH

AIN

SA

W A

CC

ESSO

RIES


AirFORCE StandardGeneral-purpose Diamond Chain10" – Part No. CC 02-254015" – Part No. CC 02-381020" – Part No. CC 03-5080

Concrete Chain Saw AccessoriesConcrete Chain Saw AccessoriesMake your concrete chain saw work for you

1.

Two options for cutting

Guide BarsGuide Bars with internal water feed10" Guide BarPart No. GB 01-2540

• 10" cutting capacity• 9" depth of square cut• For 25 segment

Diamond Chain

15" Guide BarPart No. GB 03-3810


Diamond Chain

20" Guide BarPart No. GB 05-5080


Diamond Chain

AirFORCE PremiumFor cutting concretewith steel reinforcement10" – Part No. CC 01-254015" – Part No. CC 01-381020" – Part No. CC 05-5080

10" chain has 25 segmentsfor 10" max. cutting depth,

9" square corners


14" square corners


19" square corners

Match the Diamond Chain tothe material or application:

2.

SpeedHook®SpeedHook®

Guides the saw for straight cutsSpeedHook® Complete Kit Part No. CS 70552 (includes SpeedHook® 42" rail, 1 saw adapter and 1 axle)• Quickly and easily attaches to wall with anchors

• Guides saw for straight cutting through reinforcedconcrete, brick, block and natural stone

• Note: Reduces cutting depth by 3"

AirFORCE F4™

Diamond Chains

CO

NC

RETE

CH

AIN

SA

W C

HA

INS


Maximize Diamond Chain life with these hints

The cutting life of the chains is not guaranteed. There are manyvariables from job to job, including hardness of concrete,which make it impossible to accurately predict chain life.*These numbers are rough, starting point estimates only, notfor bidding purposes. Please refer to Operator's Manual forproper safety precautions.

Concrete Diamond Chain LifeConcrete Diamond Chain Life

Factors negatively affecting chain life:• Steel reinforcing… many pieces of large diameter rebar cause reduced life• Aggregate hardness… harder aggregates cause reduced life• Operator experience… first-time users generally get less chain life

Cutting tips to improve chain life:• Use minimum of 20 PSI water pressure• Always cut at full throttle – slowly plunge into wall

and push hard enough to cause the RPMs to drop by 25% to 30%• Always apply steady feed force• Slowly rock the bar and chain into the cut using Wallwalker® as a pry point• Reduce arm motions – hold saw close to body, using legs and body to apply

feed force; always cut with saw between shoulders and knees, preferably at waist height• If saw begins to drift off the intended cut line, pull out and restart cut

Estimated chain life for AirFORCE Premium – 29 segment chain (Part No. CC 01-3810) is approximately 600 in.-ft. in concrete with up to 5/8" rebar.

Wall Thickness

6 inches

8 inches

10 inches

Lineal feet in common wall thickness*:Lineal Cutting Feet

100 feet

75 feet

60 feet

8"

7'

3'How to calculate inch-foot (in.-ft.)An inch-foot (in.-ft.) is equal to the Depth of Cutin inches x Length of Cut in feet. This measurementis used to determine chain or blade life.

For example:Calculate how many in.-ft. are in this doorway.1. Determine the Depth of Cut in inches.For this example, it is 8 inches.

2. Determine the Length of Cut in feet.3 + 7 + 3 + 7 = 20 feet.

3. Multiply the two numbers.8 in. x 20 ft. = 160 in.-ft.

Note for metric users: 1cm = .3937 inches and 1 meter = 3.2808 ft.

• Removes moisture and dirt from air lines; a float valveautomatically ejects water and dirt

• Includes automatic oiler; prevents tools from freezing in coldenvironments

• Eliminates air motor downtime caused by water and dirt

• Connections for two tools, max. air flow 185 CFM

AirPacAirPac Extends life of pneumatic power tools see page 33 for more information

Model CSAP-2

PNEU

MA

TIC

CU

T-O

FF S

AW

S


Pneumatic Cut-off SawsPneumatic Cut-off Saws - Hand-held and Walk-behind

Cut concrete, asphalt, masonry, steel and more

Hand-held Cut-off Saws, 14" and 18"• Wet or dry cutting of concrete, reinforced concrete, asphalt,

masonry, steel and more

• Cut up to 7" deep with no gas or engine fumes

• Low maintenance – no belts, pistons, fuel lines or carburetors

• Accept diamond or abrasive blades

• Adjustable blade guard with built-in water connection

• In-line oiler for motor lubrication

• 1" arbor size, 1/2" NPT air connection

Walk-behind Cut-off Saw – 20" Capacity• Wet or dry cutting of concrete, asphalt and other materials

• Cut up to 7" deep with no gas or engine fumes

• Low maintenance – no belts, pistons, fuel lines or carburetors

• Designed for tough cutting jobs, including joint sawing, floorsawing, trenching, road repair and plant maintenance

• 9.5 HP pneumatic motor with gearbox drive

• Rugged steel construction – yet only 107 lbs.

• Built-in water connection for wet cutting

• Built-in oiler for motor lubrication

• Optional water tank kit

PowerRPM (No Load)Max. Depth of CutMax. Blade CapacityCFM @100 PSIDriveWeight

9.5 HP2900

7"20"92

Gearbox107 lbs.

Model CSR-150

Cut-off Saw with 14" abrasive blade14" Cut-off Saw with diamond blade

Built-in 3/4" water connection

• 1/2" NPT Air Connection (works on bothleft and right side); includes whip hosewith coupling

Adjustable •crank handleto raise andlower blade

•

High-torque output gear box

• 3/4" WaterConnection

• Pointer

1" arbor

CSH 100CSH 125CSH 150

5 HP

9.5 HP

9.5 HP

Power

5250

3200

3200

RPM(No Load)

Max.Depthof Cut

4"

5"

7"

90

92

92

Direct

Gearbox

Gearbox

CFM @100 PSI

14

14

18

Max.Blade

Capacity

22

26

28

Drive Weight(lbs.)

ModelNo.

Diamond Cut-off Saw BladesDiamond Cut-off Saw BladesModel No.734 906 (wet or dry)734 908 (wet or dry)734 916 (wet or dry)

Size12" x .125" x 1"14" x .125" x 1"16" x .125" x 1"

Model No.734 909 (wet or dry)734 910 (wet or dry)RES.403 (rescue)

Size18" x .125" x 1"20" x .125" x 1"14" x .125" x 1"

• Cut cured concrete

• Special blades for cuttingasphalt, ductile iron andgreen concrete alsoavailable

Premium diamond blades for saws with 1" arbor

AIR

TO

OL

AC

CES

SORI

ES


AirPacAirPac Extends life of pneumatic power tools

Air Tool Lubricant – Air Tool Lubricant – Non-toxic

Electric Nibblers –Electric Nibblers – easily cut sheet metal and steel up to 3/8" thick

• Removes 98% of water and contaminants from bothportable and stationary compressed air systems toprotect pneumatic tools

• Totally automatic – a float valve automatically ejectsthe accumulated water and dirt

• Maintenance-free – no filters or parts to replace orservice

• Includes automatic 1/2 pint oiler; prevents tools fromfreezing in cold environments

• 2 tool outlets; Chicago couplings on all connections

• Weighs 40 lbs., max. air 185 CFM

• Use Air Tool Lubricant for best results – see belowfor more information

How it Works:• Air compressors compress air into small areas – this causes heat, which contains moisture

• As heated air travels through air lines, it cools, creating water droplets

• When this air/water mixture enters the AirPac, it travels through a baffle that traps the water and dirtand drops it into a holding area

• When enough water is accumulated, a float allows the water and dirt to be automatically ejected• Dry air then enters the lubricator and is mixed with oil and sent to the tool

CS Unitec offers three types:ProLube-ATL: A super-premium synthetic airtool lubricant. Provides maximum lubrication,cleaning and protection for portable air tools.

ProLube-ATL/AF (anti-freeze): ProLube-ATL/AF blend that prevents freezingand is ideal for operating air tools in coldclimate conditions.

Air Tool Line Conditioner: For use in underwater air tools. Displacesmoisture. Developed to inhibit rust andcorrosion of air motors.

ProLube-ATL1 gallon bottleOrder No.

CS 7043-001

Case (4 bottles)Order No.

CS 7043-002

1 quart bottleOrder No.

CS 7049-003


CS 7049-0041 gallon bottleOrder No.

CS 7049-001


CS 7049-002

ProLube-ATL/AF

1 quart/liter bottleOrder No. MS 9105

Air Tool Line Conditioner

Model CSAP-2

CS-350-ECS-500-ECS-700-ECS-3400-E** 2-speed gearbox

12 Amp, 110V

12 Amp, 110V

17.4 Amp, 110V

17.4 Amp, 110V

Power

4

4.5

5

5.2

WorkingSpeed(ft./min.)

StartHoleDia.1.25"

1.25"

2.75"

3"

650

600

400

230 / 370

.135"

.197"

.276"

.375"

.090"

.135"

.197"

.276"

.135"

.276"

.394"

.500"

Strokesper Minute

.280"

3.125"

5.5"

16"

Min.Radius

7.5

8.5

26

32

Mild Steel StainlessSteel

Aluminum

Max. Sheet ThicknessWeight(lbs.)Model No.

• Ideal for cutting sheet metal, steel plate,weldments and double sheets

• Two-speed gearbox (model CS-3400-E)

• Head can be rotated to four 90˚ positions(selected models)

• Cut over 90˚ bends with optional die• Ideal for use in underground storage tank

removal, I-beam splitting, plate cutting and more

CS-3400 cutsup to 3/8"

thick steel.


STO

NE

SAW

Circular Saw for Stone Circular Saw for Stone

• Wet and dry cutting of hard stone materials, including granite,marble, terrazzo and artificial stones

• Ideal for landscapers, renovators and stone shops

• 7" diameter blade

• Adjustable cutting depth up to 21/3" for precise cuts

• Electronic features include soft start, overcurrent cut-off andmotor overload protection with optical overload indicator

• Easy cutting depth adjustment – no tool required

• Vacuum connectionfor use with CS Unitec'sdust extraction vacuumsystems

Slide protectswork surface

PowerBlade DiameterMax. Depth of CutLoad SpeedNo-load SpeedWeight

20 AMP / 110 V7"

21/3"4,300 RPM7,500 RPM

17 lbs.

Model EDS 181

7" Wet/Dry Saw for hard stone materials

Concrete Grinders – 5", 7" & 9" Models

Dust Extraction Vacuums – Wet/Dry• Vacuum for use with numerous concrete tools,

including grinders, saws and power tools –maintain clean, safe work environment

• Collects concrete dust and more – use withor without paper, plastic or slurry filter bags

• Accommodates one or two tools(with optional Y splitter)

• Electromagnetic pulse filter cleaning system –99.85% filtration efficiency; HEPA filters optional

• Use hand-held or with a walk-behind cart

• Connect to vacuum for dust-free operation• Powerful motors handle tough jobs like

removing epoxy, paints and adhesives, aswell as leveling and surface preparation

Dust collection portfor use with dustextraction systems

Concrete Grinders and Dust Extraction Systems

WA

LL S

LOTT

ER


Wall SlotterWall Slotter

WarrantyProducts of CS Unitec, Inc. are warranted to be free from defects in material and workmanship for one year from date of purchase.This warranty does not apply to normal wear or products which have been abused, misused, modified or repaired by someoneother than CS Unitec, Inc. or its Authorized Service Representatives.If a product proves defective in material or workmanship within one year after purchase, return it to CS Unitec, Inc. or anAuthorized Service Center, transportation prepaid. CS Unitec, Inc. will, at its option, repair or replace defective products free ofcharge.CS Unitec, Inc.’s sole liability and your exclusive remedy under this warranty is limited to repair or replacement of the defectiveproduct. There are no other warranties expressed or implied and CS Unitec, Inc. shall not be liable for incidental, consequential orspecial damages, or expenses excepting only the cost or expense of repair or replacement as described above.

• Cut channels in concrete and masonry

• Ideal for electricians, plumbers andother contractors

• Cut two parallel grooves up to113/16" wide x 13/4" deep

• Operates with two parallel bladesand spacers

• Compact with parallel grips foreasy handling

• Works 5/8" from the edge or corner

• Closed vacuum hood for efficient dustcollection, optimal air flow and easyremoval of fragments; vacuum hose lock

• Motor overload protection with opticaloverload indicator

PowerBlade DiameterLoad SpeedNo-load SpeedArbor SizeMax. Slot WidthMax. Milling DepthWeight

20 AMP / 110 V6"

4,300 RPM7,500 RPM

7/8"113/16" (46mm)13/4" (45mm)

12.8 lbs.

Model EMF 150

Cut channels and parallel grooves in walls and floors

Standard Equipment:2 premium Diamond blades (part no. 37441),carrying case and spanner wrench.

Optional Equipment:Standard Diamond blade; two required(part no. 37440)

Cuts bothconcrete and

masonry.

Dust collectionport for use withdust extraction

systems

CS UNITEC, Inc.22 Harbor Avenue, Norwalk, CT 06850Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921Email [email protected] • www.csunitec.com

ALL SPECIFICATIONS ARE SUBJECT TO CHANGE © Copyright 2012, CS Unitec, Inc., 08-12-10M

Also available from :CS Unitec, Inc. specializes in electric, pneumatic and hydraulic power tools for construction and industry.

Innovation and high quality are synonymous with CS Unitec's power tools. In 1991, the company inventedthe first pneumatic portable band saw. CS Unitec has added to its list of industry firsts with the widest rangeof portable magnetic drills and hand-held concrete core drills. The line also includes electric, pneumatic andhydraulic portable band saws, reciprocating saws, hacksaws, nut runners, rotary hammer drills, rollingmotors, metal finishing tools, portable mixers, dust extraction tools and vacuum systems.

… the power of innovation!®

Please call us or visit our Web site at www.csunitec.com.

Electric, hydraulic andpneumatic Hand-heldand Rig-mounted Core

Drills for concrete

Pneumatic andHydraulic

Magnetic Drills foruse in hazardous

environmentsElectric Magnetic

Drills for cutting upto 51/8" holes in

metal

Portable Mixersand Mixing Stands

Nut Runners for turning valves,tightening, tapping, reaming,

beveling and expanding

Air and hydraulic SDS RotaryHammer Drills for concrete

Metal FinishingMachines

Electric, Pneumatic and Hydraulic ToolsElectric, Pneumatic and Hydraulic Tools

View product demonstrations at www.csunitec.com.

Variety ofpaddlesavailable

Portable Saws & Accessories - Thomasnet

Documents

Transcript of Portable Saws & Accessories - Thomasnet