Market information about our Visitors and our Active Considerers
Our Formulation Universes - SEPPIC
-
Upload
khangminh22 -
Category
Documents
-
view
0 -
download
0
Transcript of Our Formulation Universes - SEPPIC
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
DiscoverOur Formulation Universes
10186 GB 01 October 2021 - SEPIPLUS™ K - Presentation 2
SEPIPLUS™ K a Graceful Touch for Clean Beauty
CLEAN
SolventPreservativeEO
Cold processable
Non-microplastic
Multifunctional thus suitable for minimalist formulation concepts
EWG friendly
Halal certified; Vegan suitable
PERFORMING SENSORIAL
Silicone-like gliding
Non-sticky & non-tacky
Emotional benefits
free
Concentrated liquid polymer
MultifunctionalThickeningEmulsifying-stabilizingTexturizing
Pre-neutralized
Large pH range 3 to 12
Non sensitive to heat or shear
Dominant elastic network for improved stability
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
A formula related to “Clean Cosmetics” concept.More informations available on seppic.com
A MONTANOV™ LEMOGREEN™ L15Caprylic/Capric Triglyceride
1.50%4.00%4.00%
B WaterSOLAGUM™ AXGlycerin
Up to 100.00%0.10%3.00%
C SEPIPLUS™ K 0.70%
D AQUAXYL™Phenoxyethanol and EthylhexylglycerinCaprylyl glycol and Ethylhexylglycerin
1.50%0.70%
0.30%
E MADECASSOSIDEWater
0.20%2.00%
* Our stability protocols are available at your request.
AS40140A I CLEAN MOISTURE LOTION
White Lotion / Packaging: PumppH: 6.0 / VISCOSITIES: 1M at RT: 10 300 mPa.s Brookfield LV2-6 / Recovery at RT (after 1M at 45°C): 10 100 mPa.s Brookfield LV2-6.STABILITY: Stable M1 at RT, 45°C, -18°C and cycles -5°C/+40°C.
PROCEDURE ADVICES / Weigh ingredients of phase A and heat to 80℃. Disperse SOLAGUM™ AX in water and heat phase B 80℃. Pre-disperse phase C in phase A, add phase B into phase A+C, homogenize it by Silverson at 4000 rpm for 5 minutes. Stir the emulsion under anchor stirring 100 rpm and gentle cooling. Mix phase E until clear. Add phase D and E into the emulsion and stir it under anchor stirring at 150 rpm until uniform.
MONTANOV™ L associated with SEPIPLUS™ K stabilizes the formula and provides liquid crystal
structure which offers long term moisturizing effect combined with AQUAXYL™!
ADDITIONAL INGREDIENTS: Caprylic capric triglyceride - Myritol 318 (BASF ) / Phenoxyethanol and Ethylhexylglycerin - EUXYL PE 9010 (SCHÜLKE AND MAYR)./ Caprylyl glycol and Ethylhexylglycerin - Sensiva SC 10 (SCHÜLKE & MAYR).
MONTANOV™ L (C14-22 Alcohols and C12-20 Alkyl Glucoside )
Glucolipid emulsifier in harmony with nature. MONTANOV™ L is well-suited to formulate different textures (from sprayable to butter cream) no matter the nature or the quantity of fatty phase used. It stabilizes emulsions, and has a strong moisturizing power since it promotes liquid crystals which prevent the skin from dehydration (efficacy proven in vivo). Ecocert and Natrue approved.AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol )
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).MADECASSOSIDE (Madecassoside)
MADECASSOSIDE is a pure active from Centella asiatica that soothes and brings comfort to sensitive skin and atopic-prone skin (in vivo results on psoriasis & atopic dermatitis-prone skin). EMOGREEN™ L15 (C15-19 Alkane (Plant-based & Renewable))
MOGREEN™ L15 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to volatile silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue.Beyond the lightweight and non-greasy skin feel, it gives a powdery finish. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).SOLAGUM™ AX (Acacia Senegal Gum and Xanthan Gum)
Combination of natural thickening polymers. It allows you to formulate non-stringy translucent gels and can be used with hot or cold process. Ecocert and Natrue approved. SEPIPULS™ K (Polyacrylate-13 and Hydrogenated Polyisobutene and Polyglyceryl-10 Laurate)
Pre-neutralized and concentrated liquid polymeric thickener on a wide range of pH (3 to 12). It imparts a slippery silicone-like feel and can be used to reduce the use of silicone in formulas. Compatible with Ethylene Oxide free formulas and Clean Beauty concept.
©U
NS
PLA
SH
CleanMoisturization
Soothing
LX201805-2005
NATURALITY PROFILE
according to ISO 16128 norm
NOC= 98,6%
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
A formula related to CLEAN COSMETICS concept.More informations available on seppic.com
* Our stability protocols are available at your request.
AS40139A I CLEAN MOISTURE CREAM
White Cream / Packaging: JarpH: 6.1 / VISCOSITIES: 1M at RT: 29 800 mPa.s Brookfield LV3-6 / Recovery at RT (after 1M at 45°C): 28 700 mPa.s Brookfield LV3-6.STABILITY: Stable M1 at RT, 45°C, -18°C and cycles -5°C/+40°C.
PROCEDURE ADVICES / Weigh ingredients of phase A and heat to 80℃. Disperse SOLAGUM™ AX in water and heat phase B 80℃. Pre-disperse phase C in phase A, add phase B into phase A+C, homogenize it by Silverson at 4000 rpm for 5 minutes. Stir the emulsion under anchor stirring 100 rpm and gentle cooling. Mix phase E until clear. Add phase D and E into the emulsion and stir it under anchor stirring at 150 rpm until uniform.
©U
NS
PLA
SH
MONTANOV™ 68 MB (Cetearyl Alcohol and Cetearyl Glucoside )
Glucolipid emulsifier derived from vegetable origin. It can be used to formulate rich, smooth textures with any type of oil phase. Promoter of liquid crystals, it plays a role in maintaining skin moisturization over time. Ecocert, Cosmos and Natrue approved. MONTANOV™ 202 (Arachidyl Alcohol and Behenyl Alcohol and Arachidyl Glucoside )
Glucolipid emulsifier derived from vegetable origin. Promoter of liquid crystals, it plays a role in maintaining skin moisturization over time. Thanks to liquid crystals which contain water, MONTANOV™ 202 helps to keep skin moisturized. Ecocert and Natrue approved. AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol )
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).MADECASSOSIDE (Madecassoside)
MADECASSOSIDE is a pure active from Centella asiatica that soothes and brings comfort to sensitive skin and atopic-prone skin (in vivo results on psoriasis & atopic dermatitis-prone skin). EMOGREEN™ L15 (C15-19 Alkane (Plant-based & Renewable))
MOGREEN™ L15 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to volatile silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue.Beyond the lightweight and non-greasy skin feel, it gives a powdery finish. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).
SOLAGUM™ AX (Acacia Senegal Gum and Xanthan Gum)
Combination of natural thickening polymers. It allows you to formulate non-stringy translucent gels and can be used with hot or cold process. Ecocert and Natrue approved. SEPIPLUS™ K (Polyacrylate-13 and Hydrogenated Polyisobutene and Polyglyceryl-10 Laurate)
EWG-friendly liquid concentrated polymer, easy to use pre neutralized and cold-processable.
A MONTANOV™ 68 MBMONTANOV™ 202EMOGREEN™ L15Caprylic Capric Triglyceride
1.00%2.00%6.00%6.00%
B Pure WaterSOLAGUM™ AXGlycerin
Up to 100.00%0.10%3.00%
C SEPIPLUS™ K 0.80%
D AQUAXYL™Phenoxyethanol and EthylhexylglycerinCaprylyl glycol and Ethylhexylglycerin
1.50%0.70%0.30%
E MADECASSOSIDEPure Water
0.20%2.00%
ADDITIONAL INGREDIENTS: Caprylic Capric Triglyceride - Myritol 318 (BASF ) / Phenoxyethanol and Ethylhexylglycerin - EUXYL PE 9010 (SCHÜLKE AND MAYR)./ Caprylyl glycol and Ethylhexylglycerin - Sensiva SC 10 (SCHÜLKE & MAYR).
MONTANOV™ 68 MB + 202 associated with SEPIPLUS™ K stabilizes the formula and provides
liquid crystal structure which offers long term moisturizing effect combined with AQUAXYL™!
LX201804-2005
NATURALITY PROFILE
according to ISO 16128 norm
CleanMoisturization
Soothing
NOC= 98,6%
SUN CARE
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
SUN CARE GB
A company
A SEPIPLUS™ KEthylhexyl MethoxycinnamateBis-Ethylhexyloxyphenol Methoxyphenyl TriazineLANOL™ 99LANOL™ 37T
1.00%7.50%3.00%
2.00%5.00%
B D.I Water Up to 100.00%
C Methylene Bis-Benzotriazolyl TetramethylbutylphenolSEPIMAT™ CP 5Phenoxyethanol (and) EthylhexylglycerinPhenylpropanol (and) Caprylyl Glycol
5.00%
3.00%1.00%0.50%
D Citric Acid (20%) Q.S.
SPF30 PA++ Smooth
None Sticky!
AS40132A I SUN GEL SPF30Calculated SPF 30 PA++
PROCEDURE ADVICES / Mix UV filters with emollients in phase A and heat to 85℃ until clear, and then disperse Sepiplus K into phase A and stir it until homogeneous. Heat phase B to 85℃. Add phase B to phase A by stirring at 150 rpm with anchor stirrer, homogenize it at 4000 rpm for 4 minutes. Cool down, add phase C and stir it with anchor stirrer at 300 rpm for 5 min. Add phase D to adjust pH value to 6.5 and stir it gently until homogeneous.
SEPIPLUS™ K has powerful stabilizing ability & provides none sticky sensory after using !
ADDITIONAL INGREDIENTS: Ethylhexyl Methoxycinnamate - PARSOL MAC (DSM) / Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine - Tinosorb S (BASF) / Methylene Bis-Benzotriazolyl Tetramethylbutylphenol – Tinosorb M (BASF) / Phenoxyethanol (and) Ethylhexylglycerin - EUXYL PE 9010 (SCHÜLKE AND MAYR) / Phenylpropanol (and) Caprylyl Glycol - sensiva® PA 40 (SCHÜLKE AND MAYR).
SEPIPLUS™ K (Polyacrylate-13 and Hydrogenated Polyisobutene and Polyglyceryl-10 Laurate) EWG-friendly liquid concentrated polymer, easy to use pre neutralized and cold-processable.
SEPIMAT™ CP 5 (Methyl Methacrylate Crosspolymer) SEPIMAT™ CP5 is a versatile texturizing agent, consisting of solid spheres with a smooth surface. These ultra-soft microspheres do not dry out the skin and are perfect for all types of formulations. In formulation, it imparts a soft and powdery feel onto the skin with a matte finish. At higher percentages of SEPIMAT™ CP5 result in a more pronounced powdery feel.
LANOL™ 37T (Triheptanoin) LANOL 37T is a good organic sunscreen solubilizer.
LANOL™ 99 (Isononyl Isononanoate) Emollient agent. Polar ester. Soft and light touch, non greasy finish and short play-time.
Yellowish Cream / Packaging: TubepH: 6.5 / VISCOSITIES: 1M at RT: 24 400mPa.s Brookfield LV2-6 / Recovery at RT (after 1M at 45°C): 24 350mPa.s Brookfield LV2-6.STABILITY: Stable M1 at RT, 45°C,-18°C and cycles -5°C/+40°C.
©U
NS
PLA
SH
LX201803-2005
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022 7
Cleansers with a Brain
JAPAN - Rituals
Double cleansing (oil + cleanser)High foamBarrier protection
KOREA - Glowing cleanse
Clean cleansing/ low pHNon Ecotoxic/ BiodegradabilitySolid cleansersWaterless/ Less water
CosrXLow pH Cleansing foam
DHC Deep Cleansing OIl
EUROPE - Sustainable above all
Dry / Sensitive skinsMicellar watersSolid cleansersMinimalistUpcyclingNo packaging
LUSH Jade Roller Naked Cleansing Balm
USA - Clean & Exfoliate
AHA/BHA cleansersSuperfood Creamy textures
GLOSSIERCleanser Concentrate
CHINA - Sensitive skin
FoamOil ControlWater basedAmino acid basedMild cleansingMoisturizing
ZHIBEN Soothing recovery cleanser
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
Elevate cleansers to skin heros
Skin Minimalism
In China 40% of Adults are seeking cleansers with strong cleansing
properties while caring for the skin
Short INCI list
Solid & Waterless
8
Waterless, solid brands with a genuine care for humans and the planet are the ones to watch
Psychodermatology
Beauty with a Brain, it links skin with psyche.
This concept aligns with Wellness and mental
health awarenessPromote relaxation and
boost mood
Loum Beauty of Calm Stress Detox Enzymatic
Cleanser
Super Facialist Purifying Cleansing wash
Use of Sal Acid and Niacinamide as key ingredients
MIP Vita Cleansing foamuse yellow foam and Vit B,C and E to boost energy and
clean
Waterless Shampoo Tabs.Just crush, add water drops
create à paste and use as normal
Change Hand sanitizer tabs.Kill germs without the single use plastic, dissolves easily in water.
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
HYGIENE
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and shouldnot be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All PPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its productsfor the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
HYGIENE GB
A company
COLD PROCESS
Bi Phasic solution / Packaging: bottlepH: NA
VISCOSITIES: 1M at RT: water fluidRecovery at RT (after 1M at 45°C): water fluid
STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C., 1 month Freeze Thaw cycles -5/+40°C
FORMULATION ADVICES / A: weight phase A and mix well, make 2% pigment solution by EMOSMART™ L15 / B: weight phase B and mix well. Dispatch phase A and B in the packaging respecting the ratio.
A WaterAQUAXYL™ Butylene GlycolSodium ChlorideMagnesium ChloridePhenoxyethanol MethylparabenEthylparaben EthylhexylglycerinPolypropylene Glycol
48.2%2.00%3.00%0.30%0.10%
0.30%
B EMOSMART™ L15EMOSMART™ L19FLUIDANOV™ 20XCI6115651 (2%)Fragrance
23.00%23.00%
0.02%0.06%0.10%
AS40075 I SMOOTH BI-PHASE MAKEUP REMOVERBi-Phasic with strong cleansing power
Bi-Phase with strong cleansingEven waterproof make-up
Mild Gentle for eyes!
A Bi-phasic solution with Stable interface thanks to FLUIDANOV™ 20X .
Strong cleansing and quick phases separation.
ADDITIONAL INGREDIENTS: Sodium Chloride GUOYAO/ Magnesium Chloride GUOYAO / Phenoxyethanol Methylparaben Ethylparaben Ethylhexylgycerin Polypropylene Glycol EUXYL K350 SCHULKE & MAYR/ CI615654 (2%) Unicert Green K7016-J LCW/ Fragrance Frag 86318953 DROM
AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol)
Aquaxyl™ moisturizes and restructures the skin by harmonizing hydric flows of the skin. Water reserves are instantly boosted, water circulation is improved in all skin layers and water loss is reduced (in vitro and in vivo tests proven). Its mechanism of action has been validated by cosmetogenomics. Ecocert and Natrue approved.
EMOSMART™ L15 (C13-15 Alkane) EMOSMART™ L15 is a high-purity, non polar, and biodegradable emollient. This high purity alkane shows an excellent compatibility with all types of oils, especially with silicone oils. It gives a fresh and vanishing texture with a dry and matt afterfeel. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…)
EMOSMART™ L19 (C15-19 Alkane, (natural & renewable)EMOSMART™ L19 is a high-purity, non polar and biodegradable emollient. It shows an excellent compatibility with all types of oils and helps to disperse minerals (TiO2/ZnO). It gives a fresh and vanishing texture with a matt afterfeel. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).
FLUIDANOV™ 20X (Octyldodecanol and Octyldodecyl Xyloside)
“EAS’EMOLLIENT” from original xylolipidic emulsifier, extra-fluid, easy-to-use, FLUIDANOV™20X is a smart emollient: texturing effect in cream gels, it will also contribute to stabilize W/O emulsions and improve skin feeling.
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
HYGIENE
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and shouldnot be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All PPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its productsfor the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
HYGIENE GB
A company
COLD PROCESS
Yellowish Clear Liquid / Packaging: pumppH: 6.6
VISCOSITIES: 1M at RT: 6000 mPa.s Brookfield LVDV1 S62-V6 / Recovery at RT (after 1M at 45°C): 6100mPa.s Brookfield LVDV1 S62-V6.
STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C.
FORMULATION ADVICES / A: Weight ingredients of Phase A and mix well into water, filter the solution, add Capigel 98 into the solution. / B:Add phase B into phase A/ C: add phase C to adjust pH around 6.5, mix with anchor stirrer at 100 rpm till uniform. / D: add ingredients of phase D one by one and mix with anchor stirrer at 100 rpm until uniform.
A AMONYL™ 380 BAAMONYL™ 675 SBORAMIX™ L30PROTEOL™ APL EFORAMIX™ CG110PEG-7 Glyceryl Cocoate
9.00%3.00%
10.00%5.00%5.00%1.50%
B WaterSapindus Mukorossi Fruit extractCAPIGEL™ 98
up to 100%0.50%4.00%
C Sodium Hydroxide (20%) 0.90%
D AQUAXYL™ Citrus Limon (lemon) Peel OilCamelia Sinensis Leaf OilCitrus Aurantium Dulcis (orange) Flower OilRosa Canina Fruit OilPelargonium Graveolens OilMethylchloroisothiazolinone & Methylisothiazolinone
1.00%0.12%
0.08%0.10%0.50%0.20%
0.10%
AS40114A I SILK SOFT ROSE OIL FOAMRose essence in a foam!
Abundant & pleasant foam Senses activation with wellbeing for
a stress less experience27.2% cleansing power
More informations available on seppic.com
Creamy and rich foam for a SPA like experienceDestressing foam with essential oils!
ADDITIONAL INGREDIENTS: Methylchloroisothiazolinone & Methylisothiazolinone EUXYL K100 (Schulke & Mayr)/ PEG-7 Glyceryl Cocoate Cetiol HE (BASF)/ Sapindus Mukorossi Fruit Extract SanSoap III (Sanhetian)/ Cirus Limon (Lemon Peel OIl) WangXiang/ Camelia Sinensis Leaf Oil WangXiang/ Citrus Aurantium Dulcis (orange) WangXiang/ Rosa Canina Fruit Oil ChiGuan/ Pelargonium Graveolens Oil ChiGuan
ORAMIX™ L30 (Sodium Lauroyl Sarcosinate)
Alternative to LESNa in sulfate free formulations. Respects the structure of the skin and provides abundant, light and soft foam
ORAMIX™ CG 110 (Caprylyl/ Capryl Glucoside) Non-ionic surfactant from vegetable origin. It is an ideal solubilizing agent for foaming products because it solubilizes essential oils, fragrances and preservatives but also boosts foam volume. Its mild cleansing effect is interesting for the formulation of make-up removers, especially for lotions. It is particularly used to emulsify and disperse molecules in cream-gels. Ecocert, Cosmos and Natrue approved.
AMONYL™ 380 BA (Cocamidopropyl Betaine))
Provides a fine foam that is stable over time. Ecocert approved. Readily biodegradable : 100% in 28 days* with * : OECD 301 B method”
AMONYL™ 675 SB (Cocamidopropyl Hydroxysultaine)
Provides a fine foam that is stable over time. Provides significantly greater conditioning properties compared to classical betainesReadily biodegradable : 67% in 28 days* with * : OECD 301 B method” PROTEOL™ APL EF (Sodium Cocoyl Apple Aminoacids)
Fruit surfactant, derived from essential amino-acids present in apple juice, for a gentle approach: unctuous foam, extremely mild to the skin and the eyes and also respectful of the environment.Readily biodegradable : 95% in 28 days* with * : OECD 301 B method”
CAPIGEL™ 98 (Acrylates Copolymer)
Ready-to-use thickening liquid polymer that creates high viscosity in aqueous media following neutralization (pH> 6.5). It also produces perfectly clear gels with a good resistance to electrolytes and polar solvents
©U
NS
PLA
SH
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
HYGIENE
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and shouldnot be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All PPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its productsfor the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
HYGIENE GB
A company
Fluid Clear Solution / Challenge test: Criteria A / Packaging: Foam PumppH: 6.0
VISCOSITIES: 1M at RT: <50 mPa.s Brookfield LV1-6 / Recovery at RT (after 1M at 45°C): <50 mPa.s Brookfield LV1-6.
STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C.
FORMULATION ADVICES / Mix phase A well. Prepare phase B with hot water and stir till solid solute well. Add phase B to phase A. Add phase C and phase D to phase A+B and stir it till uniform.
3
4a
NOC = 96.6%
A D.I. WaterGlycerinORAMIX™ L30 EFORAMIX™ CG 110PROTEOL™ OAT PFAMONYL™ 380 BA
Up to 100%3.00%4.00%5.00%6.00%6.00%
B D.I. WaterLIPACIDE™ C8GSodium Hydroxide (25%)
10.00%0.20%0.14%
C AQUAXYL™ 1.00%
D Benzyl AlcoholSodium BenzoateCitric Acid (25%)
0.80%0.50%
q.s.
AS40164 I NATURE PURE CONTROL FOAM
NATURALITY PROFILE
according to ISO 16128 norm
Mild & soft
Oil control!Dense & abundant foam!
OTHER PAGE LAYOUT (if the white area at the bottom of the page is too large)
A formula related to NATURAL COSMETICS concept.More informations available on seppic.com
This moisturizing cleanser combines sustainability and performances !
ADDITIONAL INGREDIENTS: Benzyl Alcohol: Microcare BNA (Thor)- Sodium Benzoate: Microcare SB(Thor)
ORAMIX™ L30 EF (Sodium Lauroyl Sarcosinate)Respects the structure of the hair and scalp and provides abundant, light and soft foam.
ORAMIX™ CG 110 (Caprylyl / Capryl Glucoside) Non-ionic surfactant from vegetable origin. It is an ideal solubilizing agent for foaming products because it solubilizes essential oils, fragrances and preservatives but also boosts foam volume. Its mild cleansing effect is interesting for the formulation of make-up removers, especially for lotions. It is particularly used to emulsify and disperse molecules in cream-gels. Ecocert, Cosmos and Natrue approved.
PROTEOL ™ OAT PF (Sodium Lauroyl Oat Amino Acids)It is a mild surfactant, based on oat essential amino acids, which develops good wetting properties and an abundant unctuous foam.
AMONYL™ 380 BA (Cocamidopropyl Betaine)Provides a fine foam that is stable over time. Ecocert approved.
This optimized combination of surfactants allows the obtaintion of dense and creamy foam even with only 7.8% a.m!
LIPACIDE™ C8G (Capryloyl Glycine)A glycine biovector and skin acidifying agent, it protects the skin and helps maintain its ecosystem. Ecocert approved.
AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol)AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. It improves the foam quality. Its mechanism of action has been validated by cosmetogenomics. Cosmos and Natrue approved.
©U
NS
PLA
SH
LZ203603-2009
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
HYGIENE
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and shouldnot be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All PPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its productsfor the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
HYGIENE GB
A company
NOC = 96.4%
A LANOL 14MMONTANE™ 80 VGLANOL 2681EMOGREEN™ L19Prunus Amygdalus Dulcis (Sweet Almond) OilTocopherolANTILEUKINE 6™ Fragrance
3.00%1.00%
20.00%33.45%40.00%
0.15%2.00%0.40%
AS40171 I JAPAN’EASE CLEANSING OILTraditional make-up remover routine
Light skin feelRefreshing and gliding
sensationSoft after feel
EMOGREEN™ L19 provides strong make-up removal properties while bringing a fresh and gliding touche. (C15-19 Alkane (Plant-based & Renewable))It is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. It gives a soft afterfeel. Inert and stable, it can be used in all types of applications, even in extreme conditions.
MONTANE™ 80 VG creates a very light emulsion when rinsing for a bare skin feel. (Sorbitan Oleate) Emulsifies all types of oil in combination with a hydrophilic emulsifier.
LANOL 14M gives substance and a rich feel to oil-to-milk textures.(Myreth-3 Myristate) This Waxy texturizing agent melts in contact with skin and brings softness and smoothness during application.
With soft and light touch, LANOL 2681 provides a non greasy finish. (Coco-Caprylate/Caprate) Emollient agent from vegetable origin. Polar ester with medium playtime. Cosmos approved.
Oily soluble, ANTILEUKINE 6™ protects and soothes the skin. (Caprylic/Capric Triglyceride and Laminaria Ochroleuca Extract) Active which regulates the inflammation mediators of the skin. It is an immediate soother which also improves hydration and protects skin from photo-aging. Cosmos and Natrue approved.
A formula related to Breathtaking Rituals conceptMore informations available on seppic.com
Fluid / Packaging: DropperChallenge test: Criteria ASTABILITY: 1M & 3M at RT, 45°C, cycles -5°C/+40°C.
All the benefits of the traditional double cleansing in only one simple formula!
ADDITIONAL INGREDIENTS: Prunus Amygdalus Dulcis (Sweet Almond) Oil: LIPOVOL ALM (VANTAGE) / Tocopherol: TOCOPHEROL (DSM) / Fragrance: Frag61304865 (DROM).
FORMULATION ADVICES: Pilot scale - 5 Kg - Propeller stirrerAdd LANOL 14M to EMOGREEN™ L19 and heat it to 60°C. Mix it with a propeller stirrer until cooling down to room temperature. Add other ingredients and stir until the mix is uniform.
©U
NSP
LASH
NATURALITY PROFILE
according to ISO 16128 norm
* Data provide from OECD tests, QSAR calculations, products SDS and literature.
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
HYGIENE
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and shouldnot be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All PPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its productsfor the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
HYGIENE GB
A company
Thick Translucent Gel / Packaging: BottlepH: 6.8
VISCOSITIES: 1M at RT: 120 000 mPa.s Brookfield LV4-6 / Recovery at RT (after 1M at 45°C): 102 000 mPa.s Brookfield LV4-6.
STABILITY: 1M at RT, 45°C, cycles -5°C/+40°C.
FORMULATION ADVICES / Mix phase A well with deflocculator at 1000 rpm 10 minutes. Add phase B into phase A and stir till mix well. Add phase C and to phase A+B and stir it till uniform.
4a
A GlycerinButylene GlycolSEPILIFE™ NUDE
50.00%34.10%3.90%
B ORAMIX™ CG 110EMOGREEN™ L19
5.00%5.00%
C AQUAXYL™Pentylene Glycol
1.00%1.00%
AS40181 I JAPAN RITUAL HOT CLEANSING
Warm touch!
Easy to rinse off!Deep Cleansing!
A formula related to NATURAL COSMETICS concept.More informations available on seppic.com
This moisturizing cleanser combines sustainability and performances !
ORAMIX™ CG 110 (Caprylyl / Capryl Glucoside) Non-ionic surfactant from vegetable origin. It is an ideal solubilizing agent for foaming products because it solubilizes essential oils, fragrances and preservatives but also boosts foam volume. Its mild cleansing effect is interesting for the formulation of make-up removers, especially for lotions. It is particularly used to emulsify and disperse molecules in cream-gels. Ecocert, Cosmos and Natrue approved.
SEPILIFE™ NUDE (Sodium Acrylate/Sodium Acryloyl Dimethyl Taurate Copolymer and C15-19 Alkane and Polyglyceryl-6 Laurate and Polyglycerin-6) Pre-neutralized liquid polymeric thickener on a wide range of pH (5.5 to 12). It also emulsifies and stabilizes all types of oily phases with a cold process. This polymer has 61% of natural origin content according to ISO 16128. Its improved biodegradability makes it possible to formulate readily biodegradable finish products. SEPILIFE™ NUDE allows formulating from sprayable to thick textures, with a quick-break effect and a nude skin feel, for all your natural concept cosmetics.
EMOGREEN™ L19 (C15-19 Alkane) Plant based and renewable The EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. It gives a fresh and gliding touch, with a soft afterfeel. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).
AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol)AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. It improves the foam quality. Its mechanism of action has been validated by cosmetogenomics. Cosmos and Natrue approved.
©U
NS
PLA
SH
LZ212106 - 2105
ADDITIONAL INGREDIENTS: Pentylene Glycol: Microcare emollient PTG (Thor)/Glycerine:Glycerine(Wilmar) / Butylene glycol: 1,3 Butylene glycol (KH Neochem)
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
HAIR CARE
HAIR CARE GB
Deep cleansing hair & scalp
Repair damaged scalp
Reduce the head itching
AS40186 I SEA SALT SCALP CLEANSING SCRUBDeep cleanser for oily hair or scalp
2
More informations available on seppic.com
ADDITIONAL INGREDIENTS: Sodium Laureth Sulfate : TEXAPON ALES 3-70A (BASF) / Guar Hydroxypropyltrimonium Chloride: Rhodicare C-500 (Rhodia)/ Tetrasodium Glutamate Diacetate: Dissolvine GL-47S () / Cocamide MIPA: Mackamide CPA Flake (Solvay) / Phenoxyethanol and Ethylhexylglycerin Microcare PEHG(Thor)/ Sodium Benzoate:Microcare SB (Thor)/ Sodium Chloride: Sodium Chloride (Guoyao) / Sodium Chloride*: Crude Salt (Zhongyan)
©U
NS
PLA
SH
FORMULATION ADVICES: Laboratory scale - 300 g - AnchorAdd EDTA, guar to cold water and disperse them well. Add SLES to dissolve uniformly. Heat up to 75-80℃ while stirring at 300 rpm. Then add phase B to phase A, stir it uniformly at 75-80℃. Cool down to 50℃ slowly, stir it for 15 min, then cool down to 45℃. Add phase C one by one, stir it uniformly. Adjust to pH 5.5 if needed.
White thick cream with coarse salts / Packaging: JarpH: 5.5 / VISCOSITIES: 1M at RT: 150,000 mPa.s Brookfield LV4-6 Recovery at RT (after 1M at 45°C): 150,000 mPa.s Brookfield LV4-6.STABILITY: 1M at RT, 45°C and -18°C.
A Aqua/WaterTetrasodium Glutamate DiacetateGuar Hydroxypropyltrimonium ChlorideSodium Laureth Sulfate 70%
Up to 100%0.20%0.10%
19.00%
B AMONYL™ 380 BAPROTEOL™ APL EFMONTANOV™ LEMOGREEN™ L19LIPACIDE™ C8GCocamide MIPA
6.00%5.00%1.00%2.00%0.20%3.00%
C Sodium ChlorideSodium Chloride*SEL GRAIN™XYLISHINE™Polyquaternium-7Phenoxyethanol and Ethylhexylglycerin Sodium BenzoateFragrance
25.00%15.00%4.00%2.00%0.70%0.50%0.50%0.50%
Formulated with sea salts and LIPACIDE™ C8G, this cream shampoo ensures mild massaging, deep
cleansing and repairing performances !AMONYL™ 380 BA (Cocamidopropyl Betaine)Provides a fine foam that is stable over time. Ecocert approved.
PROTEOL™ APL EF (Sodium Cocoyl Apple Amino Acids)Fruit surfactant, derived from essential amino-acids present in apple juice, for a gentle approach: unctuous foam, extremely mild to the skin and the eyes and also respectful of the environment.
MONTANOV™ L (C14-22 Alcohols and C12-20 Alkyl Glucoside)Glucolipid emulsifier in harmony with nature. MONTANOV L is well-suited to formulate different textures (from sprayable to butter cream) no matter the nature or the quantity of fatty phase used. It stabilizes emulsions, and has a strong moisturizing power since it promotes liquid crystals which prevent the skin from dehydration (efficacy proven in vivo).
EMOGREEN™ L19 (C15-19 Alkane) Plant based and renewable
The EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. It gives a fresh and gliding touch, with a soft afterfeel. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).
LIPACIDE™ C8G (Capryloyl Glycine)A glycine biovector and skin acidifying agent, it protects the skin and helps maintain its ecosystem. It also protects cosmetic products by increasing the microbiological stability of formulas with a low preservative content. Ecocert approved.
SEL GRAIN™ exfoliates and revitalizes the skin while also increasing metabolism and circulation of the scalp. (Sea salt) Its a Sea Salt, used in massage applications on the body and to help reduce stress.
Shampoo conditioning efficacy is ensured by PQ-7, while XYLISHINE™ (Xylitylglucoside and Anhydroxylitol and Maltitol and Xylitol and Pelvetia Canaliculata Extract) moisturizes and repairs hair: it helps maintain the deep hydration of the hair and protect the fiber. As a result, hair fiber is smoothed and frizz effect limited.
LZ213601-2109
NATURALITY PROFILE
according to ISO 16 128 norm
NOC= 73,5%
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
HYGIENE
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and shouldnot be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All PPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its productsfor the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
HYGIENE GB
A company
Melting Balm / Packaging: JarpH: 5.0
VISCOSITIES: 1M at RT: NA Recovery at RT (after 1M at 45°C): NA
STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C.
FORMULATION ADVICES /Weigh phase B in a 400ml beaker, heat it up to 85℃, stir it until phase B is totally melted to liquid form. Stop heating, add phase A into phase B under medium agitation, cool down to 60℃, add phase C, mix it uniformly, pour the mixture to the packaging.
3
4a
NOC = 93.9%
AS40189 I “CLEAN” DOUBLE CLEANSING BUTTER
NATURALITY PROFILE
according to ISO 16128 norm
A formula related to NATURAL COSMETICS concept.More informations available on seppic.com
©U
NS
PLA
SH
LZ213603-2110
A double action cleansingJapanese inspired - non dryingExcellent cleaning properties
Excellent rinse off
A Aqua/WaterORAMIX™CG 110
Up to 100%5.00%
B EMOGREEN™ L15EMOGREEN™ L19MONTANOV™ SMONTANOV™ LC10-18 TriglycerideBehenate GlycerolPolyethyleneBeeswaxHydroxyacetophenoneEthylhexylglycerin
20.00%20.00%
5.00%5.00%
10.00%8.00%5.00%8.00%0.35%0.50%
C Fragrance 0.30%
A melting balm texture able to remove even waterproof make up
Soft and non dry after feel after rinse off!
ORAMIX™ CG 110 (Caprylyl/ Capryl Glucoside) Non-ionic surfactant from vegetable origin. It is an ideal solubilizing agent for foaming products because it solubilizes essential oils, fragrances and preservatives but also boosts foam volume. Its mild cleansing effect is interesting for the formulation of make-up removers, especially for lotions. It is particularly used to emulsify and disperse molecules in cream-gels. Ecocert, Cosmos and Natrue approved. EMOGREEN™ L15 (C15-19 Alkane (Plant-based & Renewable))
EMOGREEN™ L15 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to volatile silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue.Beyond the lightweight and non-greasy skin feel, it gives a powdery finish. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).
EMOGREEN™ L19 (IC15-19 Alkane renewable) EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue (certification on going). It give a fresh and gliding touch, with a soft afterfeel. Inert and stable, it can be used in all types of applications, even in extreme conditions (ph, oxidizing/reducing media…)
MONTANOV™ S (Cocoglucoside and Coconut Alcohol) Glucolipid co-emulsifier in harmony with nature. The combination with another emulsifier facilitates the formulation of stable sun care products in terms of texture, dispersion of sunscreens, protection factor, etc. Ecocert, Cosmos and Natrue approved.
MONTANOV™ L (C14-22 Alcohols and C12-20 Alkyl Glucoside)Glucolipid emulsifier in harmony with nature. MONTANOV™ L is well-suited to formulate different textures (from sprayable to butter cream) no matter the nature or the quantity of fatty phase used. It stabilizes emulsions, and has a strong moisturizing power since it promotes liquid crystals which prevent the skin from dehydration (efficacy proven in vivo).
ADDITIONAL INGREDIENTS: Polyethylene: Performalene 400 (NEW PHASE)/ Beeswax: Beeswax(KAHL)/C10-18 Triglyceride: DUB CIRE H1 (DUBIOS) /Behenate Glycerol : DUB BG (DUBOIS)/Hydroxyacetophenone: Microcare Antioxidant HAP (Thor)/Ethylhexylglycerin: MIcrocare Emollient EHG/ Fragrance: 61304865 (DROM)
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022 17
Maskmania the rise a new formats
JAPAN - Conservative
Anti aging/ WhiteningPore refiningSheet masksfermented actives
KOREA - Pad Mania
Quick skin care MultifunctionalApplicable to creams and essences
Scinic Super moist cream essence Pad
Hadabisei super penetration 3D aging care
EUROPE - Sustainable above all
Solid formatNo sheet => pollutionBarrier repair/ dermocosmeticSensorial benefits
FLORENCE by MILLSMoisture Mask Pearls
USA - Exfoliate & nourish
Use of PHA (less irritating)Mud masksCeramidesNourishing/ Balm textures
DRUNK ELEPHANT F-Balm Electrolyte Water facial
CHINA - New Formats
Evolution towards new forms Focus on moistureMud masks for oily skins
Chioture Fermented mask Thin layer for rinse off free mask
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
Masks rebirth
Solid format
Easyness of use, more stable
microbiologically. Interesting for
nourishing functions and fun application
DIY
Fun but also allows to keep some fragile
ingredients freshness.Add just before
applicationConsumer involvement
Hypercustomization
Masks for different parts of the body or even combined with
apps and specific tools
Watermelon brightening face mask - MILK
Clay mask base
Dr JART Shakking rubber elastic shot
Fun and antiaging mask to protect skin elasticity
FOREO Connected MaskBased on the principals of
thermotherapy
COSNA YA PACKOutdoor mask pack
Integrated beauty routine outside home.
SHISEIDO WASO Sakura MoshiInspired by Moshi cake with
gooey sensation DIY concept
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
COLD PROCESS
More informations available on seppic.com
A Caprylic Capric TriglycerideDimethiconeSIMULGEL™ INS 100SEPIPLUS™ 400
1.00%0.50%2.00%1.00%
B Aqua/WaterButylene GlycolSOLAGUM™ AX
Up to 100%4.00%0.10%
C AQUAXYL™ SEPICALM™ VG WPOLIGOGELINE SPEPropylene/ Diazolidinyl Urea/ Trimethyl Iodo propynyl Butyl EsterFragrance
1.00%1.00%1.50%0.70%
0.05%
D Colorant 0.01%
* Our stability protocols are available at your request.
AS40042 I ROSE SLEEPING PACKMoisture treatment in a jar!
Pink cream gel/ Packaging: JarpH: 5.6 / VISCOSITIES: 1M at RT: 41 000 mPa.s Brookfield S4S6/ Recovery at RT (after 1M at 45°C): 42 000 mPa.s Brookfield S4S6.STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C.
FORMULATION ADVICES / A: Weight phase A/ B: Weight phase B, stir until uniform/ Add phase B to phase À directly, start homogenization at 4000 rpm for 4 mn/ Change to stir the mixture with anchor at 80 rpm and add phase C one by one, mix until uniform./ Add phase D and mix until color is uniform.
A mask without sheetMelting texture with fresh and
elegant skin feelFilled with moisture
A jar full of moisture without sheet for à sustainable touc!
Elegant and fresh skin feel!
ADDITIONAL INGREDIENTS: Caprilic capric triglycerides Myritol 318 (BASF) / Dimethicone DC 200 350 cst (DOW CORNING)/ Propylene/ Diazolidinyl Urea/ Trimethamine Iodopropynyl butyl ester - Liquid Germall Plus (ASHALAND)/ Fragrance - 276274 (DROM)/ Colorant Red 33 ( CI17200)
SIMULGEL™ INS 100 (Hydroethyl Acrylate/ Sodium Acryloyldimethyl Taurate Copolymer and Isohexadecane and Polysorbate 60)
Pre-neutralized liquid polymeric thickener on a wide range of pH (3 to 12). It provides also excellent oil stabilizing effect. Versatile and efficient, SIMULGEL™ I-NS 100 is used to develop from sprayable, extra-liquid to very thick formulas. It creates melting textures with a fresh skin feel.
SEPIPLUS™ 400 (Polyacrylate-13 and Polyisobutene and Polysorbate 20)
Pre-neutralized and concentrated liquid polymeric thickener on a wide range of pH (3 to 12). It imparts a slippery silicone-like feel and can be used to reduce the use of silicone in formulas. Due to this benefit, which makes it easy to spread, along with its perfect compatibility with various sunscreen coatings, it is ideal for sun care products.
SOLAGUM™ AX (Acacia Senegal Gum & Xanthan Gum)
Smart combination of natural thickening polymers. SOLAGUM™ AX also displays emulsifying properties that allow to stabilize up to 15% of oils. It also offer good compatibility with hydrophilic pigments and inorganic sunscreens allowing to create all kinf od formulation.Can be used with hot or cold process. Ecocert and Natrue approved, it is the perfect ally for all natural formulation.Readily biodegradable : >90% in 28 days* with * : OECD 301A method
AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol)
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted, water circulation is improved in all skin layers and water loss is reduced (in vitro and in vivo tests prove this efficacy). It’s mechanism of action has been validated by cosmetogenomics. Cosmos and Natrue approved.
SEPICALM™ VG WP (Sodium Palmitoyl Proline and Nymphea Alba Flower Extract)
A successful marriage between palmitoylproline and water lily flower extract reaching a unique lightening and soothing effect: thanks to an action towards both a modulation of inflammatory mediators and a reduction of genetic expression of tyrosinase (key enzyme of pigmentation), SEPICALM™ VG WP decreases cutaneous pigmentation induced by stress or aging process (in vitro and in vivo proven efficacy).
OLIGOGELINE SPE (Chondrus Crispus Extract)
OLIGOGELINE SPE works as a second skin, forming a natural non occlusive shield to protect from pollution effects. 78% of microparticles are removed. Protection is about 43% versus non treated skin. Results are significant versus placebo.
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
COLD PROCESS
More informations available on seppic.com
A WaterSEPIMAXTM ZEN
Up to 100%0.25%
B AQUAXYL™OLIGOGELINE SPETALADVANCE
0.50%0.50%0.20%
C Water1,2 HexanediolGlycerinCERAMOSIDES™ HP
5.00%0.60%2.00%0.08%
D FragranceSIMULSOL 1293Water
0.01%0.03%2.00%
E Butylene GlycolHydroxyacetophenone
3.00%0.40%
* Our stability protocols are available at your request.
AS40108A I HEALTHY GLOW SKIN MASK
Transparent solution/ Packaging: Sheet maskpH: 5.7 / VISCOSITIES: 1M at RT: 700 mPa.s Brookfield LVDV1 S61/V6 / Recovery at RT (after 1M at 45°C): 450 mPa.s Brookfield LVDV1 S61/V6.STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C.Turbidity 15 NTU (Turbidimeter2100Q)
FORMULATION ADVICES / Add water into a 400 ml beaker, start agitation at 400 rpm, add SepimaxTM ZEN slowly, mix the mixture about 30 minutes until the batch is totally clear and uniform. Add the ingredients in phase B one by one. Premix phase C in a 50 ml beaker and heat to 70°C until totally clear, and add it into the main beaker. Premix phase D, add it into the main beaker. Premix phase E Hydroxyacetophenone till it dissolve, Add phase E to main beaker.
Supple and soft skin feel Healthy pink glow
Moisturization
Supple & Playful texture thanks to the association of SEPIMAX ZEN™ and
OLIGOGELINE.Pore Minimizing effect!
ADDITIONAL INGREDIENTS: Schülke & Mayr 1,2-Hexanediol: Hexanediol (Schülke & Mayr)/ Hydroxyacetophenone: (Schülke & Mayr)/ Fragrance: Fragrance 86318952 (DROM)
SEPIMAX ZEN™ (Polyacrylate Crosspolymer-6)
Powder polymer with a MAXIMUM resistance to electrolytes thanks to its high associative behavior. Stable from pH 2 to 8, it enables the creation of formulas with a specific skin feeling, included foaming formulas: rich, velvety and elegant. It is now possible to formulate transparent aqueous gels, cream-gels and emulsions with any kind of active ingredients and to achieve ZEN.
AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol)
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted, water circulation is improved in all skin layers and water loss is reduced (in vitro and in vivo tests prove this efficacy). It’s mechanism of action has been validated by cosmetogenomics. Ecocert and Natrue approved.
CERAMOSIDES™ HP (Glycosphingolipids & Glycolipids)
The essence of perfect skin. CERAMOSIDES™ HP are an original combination (patented) of natural CERAMIDES and OMEGA which protect the skin from the loss of elasticity, one of the primary causes of enlarged pores with age. After 56 days of treatment, the skin roughness is smoothed (-73% skin roughness) and the pores are visibly smaller. OLIGOGELINE SPE™ (Chondrus Crispus Extract)
Second skin ingredient: binds carrageenans and skin proteins, moisturizing skin and reduce TEWL, re-mineralizing because of high calcium content (antiaging & slimming).
SIMULSOL™ 1293 (PEG-40 Hydrogenated Castor Oil)
Solubilizer
©U
NS
PLA
SH
NATURALITY PROFILE
according to ISO 16 128 norm
NOC= 98,2%
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
A Aqua/WaterGlycerin
Up to 100%5.00%
B SEPINOV™ EMT 10SEPIMAX ZEN™
1.20%0.30%
C FLUIDIFEEL™ EASYFLUIDANOV™ 20XEMOGREEN™ L19LANOL 2681
1.50%0.50%6.00%4.00%
D TALADVANCE™ ASPAR’AGE™SEPITONIC™ M3.0
2.00%1.00%1.00%
E Phenoxyethanol - EthylhexylglycerinPhenylpropanol -Propanediol - Caprylyl Glycol - Tocopherol
1.00%
0.50%
COLD PROCESS A formula related to BEAUTY TRILOGY concept.
More informations available on seppic.com
* Our stability protocols are available at your request.
AS40142 I CHRONOBIO’ SLEEPING MASKResynch your natural rythm!
Beige fluid lotion / Packaging: Roll-on tube / TubepH: 6,0 / VISCOSITIES: 7J at RT: 15 800 mPa.s Brookfield LV3-6 / STABILITY: 1M at RT, 45°C
FORMULATION ADVICES: Laboratory scale - 200 g - SilversonMix phase A ingredients and stir at 50 rpm. Mix phase C ingredients until it gets clear then add phase B into phase C and mix at 50 rpm. Add phase (B+C) into phase A then homogenize at 4000 rpm for 4 mins. Add phase D and mix. Add phase E ingredients one by one and mix.
Perfect complexion
Healthy aging
Ritual benefits
3
4a
4b
Chronobio’ sleeping mask combines 3 active ingredients with scientifically proven efficacy in
well-aging, skin radiance and pollution protection.The new evening face massage ritual for a perfect complexion!
NATURALITY
PROFILEaccording to
ISO 16128 norm
NOC= 97.0%
©U
NS
PLA
SH
* Data provide from OECD tests, QSAR calculations, products SDS and literature.
The combination of functional ingredients creates this fluid, gliding and light texture adapted to the roll-on tube packaging, ideal for a massage ritual!
FLUIDIFEEL™ EASY (Lauryl Glucoside and Myristyl Glucoside and Polyglyceryl-6 Laurate) gives light and fluid texture, adapted to roll-on tube packaging. Sustainable O/W emulsifier processable at room temperature. FLUIDANOV™ 20X (Octyldodecanol and Octyldodecyl Xyloside) is a co-emulsifier which contributes to stabilize the emulsions and improves its skin feel.EMOGREEN™ L19 (C15-19 Alkane - Plant-based & Renewable), together with LANOL 2681 (Coco-Caprylate/Caprate), gives a fresh and gliding touch with a soft afterfeel. SEPINOV™ EMT 10 (Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer) imparts satiny and fresh skin feel. It stabilizes the formula supported by SEPIMAX ZEN™ (Polyacrylate Crosspolymer-6).
TALADVANCE™ (Glycerin - Aqua/Water - Centella Asiatica Leaf Extract) regulates the cellular cycle in the epidermis, increases fibroblast functionality & protects the dermis. It brings long term radiance and shows a powerful soothing activity (with inhibition of IL-1 (-76%) & of IL-8 (-34%)).ASPAR’AGE™ (Aqua/Water and Propanediol and Asparagosis Armata Extract), regulates the effect of "Senescent Messaging Secretome" in order to reduce the contagious aging on young cells.SEPITONIC™ M3.0 (Magnesium Aspartate and Zinc Gluconate and Copper Gluconat) is a cell chrono-energizing and anti-free radical agent.Increasing the cutaneous oxygenation (in vivo proven), SEPITONIC™ M3.0 is active at any age for vitality, skin aging prevention and protection against stress and pollution.
ADDITIONAL INGREDIENTS: Phenoxyethanol - Ethylhexylglycerin - EUXYL PE 9010 (SCHÜLKE & MAYR) / Phenylpropanol -Propanediol - Caprylyl Glycol - Tocopherol - SENSIVA PA 40 (SCHÜLKE & MAYR)
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
More informations available on seppic.com
A MONTANOV™ 202LANOL™ 2681EMOGREEN™ L19
0.30%1.00%2.00%
B SEPINOV™ WEOSEPIMAX™ ZEN
0.55%0.08%
C D.I. WaterGlycerin
20.00%3.00%
D WaterSodium Hydroxide(25%)LIPACIDE™ C8G
5.00%0.16%
0.20%
E D.I. WaterAQUAXYL™1,2 HexanediolHydroxyacetophenone
Up to 100%0.50%0.40%0.40%
* Our stability protocols are available at your request.
AS40177 I OIL CONTROL MASK
White lotion / Packaging: sheet maskpH: 5.4 / VISCOSITIES: 1M at RT: 1000 mPa.s Brookfield LVDV1 S61V6 / Recovery at RT (after 1M at 45°C): 1200 mPa.s Brookfield LVDV1 S61V6STABILITY: M3 at RT, 45°C, cycles -5°C/+40°C. Centrifugation: Passed 3000 rpm, 30 rpm
FORMULATION ADVICES / Weight phase A and heat to 85℃. Disperse phase B into heated phase A. Add the heated -80℃ phase C into phase A+B, homogenize it at 4000 rpm for 4 minutes. Mix phaseD with 70~80℃ water and stir until lipacide C8G dissolve completely. Add phase D & E into the emulsion at 45℃ and cool down the system under anchor stirring at 200 rpm for 10 min.
Smooth & non sticky Quick drying with comfort
Oil Control
Long lasting fresh skin, avoid shiny face.Stable low viscosity!
ADDITIONAL INGREDIENTS: 1,2 Hexanediol : Effsin HD(Schülke & Mayr)- Hydroxyacetophenone:Effsin HDASchülke & Mayr)
MONTANOV™ 202 (Arachidyl Alcohol and Behenyl Alcohol and Arachidyl Glucoside )
Glucolipid emulsifier derived from vegetable origin. Promoter of liquid crystals, it plays a role in maintaining skin moisturization over time. Thanks to liquid crystals which contain water, MONTANOV™ 202 helps to keep skin moisturized. Ecocert and Natrue approved.
SEPIMAX ZEN™ (Polyacrylate Crosspolymer-6)
Powder polymer with a MAXIMUM resistance to electrolytes thanks to its high associative behavior. Stable from pH 2 to 8, it enables the creation of formulas with a specific skin feeling, included foaming formulas: rich, velvety and elegant. It is now possible to formulate transparent aqueous gels, cream-gels and emulsions with any kind of active ingredients and to achieve ZEN.
AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol)
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).
EMOGREEN™ L19 (C15-19 Alkane) Plant based and renewable
The EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. It gives a fresh and gliding touch, with a soft afterfeel. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).
SEPINOV™ WEO(Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer )
Pre-neutralized powder polymeric thickener on a wide pH range (3-12) and compatible with Ethylene Oxide free formulas. It has good resistance to electrolytes and imparts a light, satin-like skin feel.
LIPACIDE™ C8G (Capryloyl Glycine)
A glycine biovector and skin acidifying agent, it protects the skin and helps maintain its ecosystem. Ecocert approved.
LANOL™ 2681 (Coco-Caprylate/Caprate) Emollient agent from vegetable origin. Polar ester with medium playtime. Cosmos approved.
©U
NS
PLA
SH
LZ210102-2104
NATURALITY PROFILE
according to ISO 16 128 norm
NOC= 99,3%
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
More informations available on seppic.com
* Our stability protocols are available at your request.
AS40178 I GREEK YOGURT FACE MASK
White Thick Cream / Packaging: JarpH: 6.2/ VISCOSITIES: 1M at RT: 105 000 mPa.s Brookfield LVT94-6 / Recovery at RT (after 1M at 45°C): 85 000 mPa.s Brookfield LVT94-6.STABILITY: Stable M1 at RT, 45°C, -18°C and cycles -5°C/+40°C.
PROCEDURE ADVICES / Weigh phase A and B and heat them to 85°C. Add phase C to A, and then add phase B to phase A+C, homogenize it by Silverson rotor-stator 4000 rpm for 4 minutes. Cool down under anchor stirring 100 rpm without water bath for 10 minutes and followed with water bath cooling for another 10 minutes. Phase D: Pre-disperse Sodium Polyacrylate Starch into glycerin, then add water into it, and stir it till uniform. Add phase D and E one by one into the emulsion around 50°C and stir till uniform. Stop stirring at 30°C.
©U
NS
PLA
SH
MONTANOV™ 202 (Arachidyl Alcohol and Behenyl Alcohol and Arachidyl Glucoside )
Glucolipid emulsifier derived from vegetable origin. Promoter of liquid crystals, it plays a role in maintaining skin moisturization over time. Thanks to liquid crystals which contain water, MONTANOV™ 202 helps to keep skin moisturized. Ecocert and Natrue approved. AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol )
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).
EMOGREEN™ L19 (C15-19 Alkane) Plant based and renewable
The EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. It gives a fresh and gliding touch, with a soft afterfeel. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).
SEPINOV™ WEO(Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer )
Pre-neutralized powder polymeric thickener on a wide pH range (3-12) and compatible with Ethylene Oxide free formulas. It has good resistance to electrolytes and imparts a light, satin-like skin feel.
EQUIBIOME™ (Propylene glycol, water, Arctium Lappa root extract)
Sourced at the core of the roots of Great Burdock using aeroponic culture*, EQUIBIOME™ offers a unique composition with higher content of rare root metabolites than classical root extracts.
SEPICALM™ VG WP (Sodium Palmitoylproline and Nymphea Alba Flower Extract)
A successful marriage between palmitoylproline and water lily flower extract reaching a unique lightening and soothing effect: thanks to an action towards both a modulation of inflammatory mediators and a reduction of genetic expression of tyrosinase (key enzyme of pigmentation), SEPICALM™ VG WP decreases cutaneous pigmentation induced by stress or aging process (in vitro and in vivo proven efficacy).
LANOL P ECAILLES(Glycol Palmitate)
Texturing agent which improves the consistency of the formula and brings soft skin feel, without any soaping effect.
A MONTANOV™ 202EMOGREEN™ L19LANOL P ECAILLESSqualaneButyrospermum Parkii (Shea Butter)Oenothera Biennis (Evening Primrose) OilPrunus Amygdalus Dulcis (Sweet Almond) Oil
3.00%4.00%1.00%1.20%
0.70%3.00%1.00%
B Pure WaterSodium HyaluronateGlycerin
Up to 100.00%0.05%2.00%
C SEPINOV™ WEO 0.60%
D Pure WaterGlycerinSodium Polyacrylate Starch
15.00%2.00%0.70%
E AQUAXYL™SEPICALM™ VG WPEQUIBIOME™Hydroxyacetophenone1,2-HexanediolTocopherol
1.50%1.00%1.00%0.50%0.50%0.10%
ADDITIONAL INGREDIENTS: Butyrospermum Parkii (Shea Butter): Lipex shea( AAK)/ Tocopherol: (DSM)/ Squalane:PRIPURE 3759 (CRODA)/ Oenothera Biennis (Evening Primrose) Oil:Evening Primrose Oil (local) /Prunus Amygdalus Dulcis (Sweet Almond) Oil: Lipovol ALM-N(Vatange)/Sodium Hyaluronate(Freda)/Sodium Polyacrylate Starch: Makimousse 25(KOBO)/Hydroxyacetophenone:Microcare Antioxidant HAP(Thor) / 1,2-Hexanediol: Effusin HA (Ashland)
Comfortable skin feeling provided by MONTANOV™ 202 associated with SEPINOV™ WEO!
Promotes healthy skin microbiota thanks to EQUIBIOME™!
LZ211303 - 2104
Unctuous Texture Favorises healthy Microbiota
Soft after feel
NATURALITY PROFILE
according to ISO 16 128 norm
NOC= 96,8%
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022A company
SKIN CARE
All information contained herein is intended merely to demonstrate the utility of Seppic products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by Seppic according to its own described methods and processes. Seppic however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. Seppic customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
More informations available on seppic.com
* Our stability protocols are available at your request.
Green cream/ Packaging: Jar
pH: 6VISCOSITIES: at RT: 73000 mPa.s Brookfield L4V6.Recovery at RT (after 1M at 45°C): 73000 mPa.s Brookfield L4V6..STABILITY: 1M at RT, 45°C, cycles -5°C / + 40°C.
Smooth texture
Fresh skin feel after use
Skin purification
NOC= 93,9%
©U
NSP
LASH
NATURALITY PROFILE
according to ISO 16128 norm
* Data provide from OECD tests, QSAR calculations, products SDS and literature.
Strong purifying and oil control efficacy thanks to Kaolin and Capryloyl glycine.
The classical mud mask !
LIPACIDE™ C8G purifies and treats oily skins.(Capryloyl Glycine)A glycine biovector and skin acidifying agent, it protects the skin and helps maintain its ecosystem. It also protects cosmetic products by increasing the microbiological stability of formulas with a low preservative content.
SENSANOV™ WR & MONTANOV™ L, form a nice soft cream, non drying for the skin.
SENSANOV™ WR (C20-22 Alkyl Phosphate and C20-22 Alcohols) Versatile phosphate anionic emulsifier effective at low dosage (1 to 3%). Provides a feeling of lightness followed by the sensation of a matt velvety veil which slowly envelops the skin. Finally SENSANOV™ WR emulsions leaves the skin supple with a long lasting sensation of comfort.
MONTANOV™ L (C14-22 Alcohols and C12-20 Alkyl Glucoside ) Glucolipid emulsifier in harmony with nature. it is well-suited to formulate different textures no matter the nature or the quantity of fatty phase used. It stabilizes emulsions, and has a strong moisturizing power since it promotes liquid crystals which prevent the skin from dehydration .
EMOGREEN™ L19 (C15-19 Alkane (Plant-based & Renewable ) It is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to volatile silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. Beyond the lightweight and non-greasy skin feel, it gives a powdery finish.
PROTEOL™ OAT PF (Sodium Lauroyl Oat Amino Acids) Surfactant based on oat essential amino acids. It is very useful as a pigment-dispersing agent in make-up formulas. It is a mild surfactant which develops good wetting properties and an abundant unctuous foam without any drying effect on the skin. Thanks to its high tolerance, PROTEOL™ OAT is recommended for sensitive skin.
SOLAGUM™ AX (Acacia Senegal Gum and Xanthan Gum) Smart combination of natural thickening polymers. It allows to formulate non-stringy translucent gels with intermediate viscosity. SOLAGUM™ AX also offers better stabilizing effect than xanthan gum while ensuring easy spreading and film forming effect. Ecocert and Natrue approved, it is the perfect ally for all natural formulation.
SEPIGEL 305™ (Polyacrylamide and C13-14 Isoparaffin and Laureth-7)Liquid polymer, famous worldwide, easy to use. It provides a creamy skin feel and allows the formulation of gels and cream gels even in cold process.
ADDITIONAL INGREDIENTS: Perfume - Frag435243 (DROM) / Glycerin - Pricerine 9091 (KARRY) / Ethylhexylglycerin- Microcare® Emollient EHG (Thor) / Hydroxyacetophenone -Microcare Antioxidant HAP(Thor) / Chlorphenesin-Microcare® CPH(P) (Thor) / Kaolin - Supreme (MERCURY) / Silica - SILNOS130 (ABC NANOTECH) /CI CI77289- UNIPURE GREEN LC 790 CF (SENSIENT)/CI77891-Unipure White LC 987 PHY (SENSIENT)
@ta
ylor
mae
AS40179 I MUDDY MASKA pure moment of care for oily skin
FORMULATION ADVICE: Laboratory scale - 200 g - Silverson & AnchorPre-mix the 6 powders in phase A by a powder machine, and then add it in water phase A under stirring until uniform. Weigh phase A & B, heat both phases to 80°C. Pre-disperse phase C in phase B, add phase A into phase B+C, homogenize it with Silverson 4000 rpm for 4 min. Stir the emulsion with anchor stirrer at 150 rpm 10 min without water bath and another 10 min with water bath. Add phase D one by one into the emulsion and stir it under anchor stirring at 150 rpm until uniform.
A D.I. WaterGlycerinKaolinCI77891CI77288CI77492CI77499TromethamineLIPACIDE™ C8GPROTEOL™ OAT PFSOLAGUM™ AX
Up to 100%4.00%
19.00%1.00%0.30%0.04%0.08%0.68%0.80%0.50%0.20%
B MONTANOV™ LSENSANOV™ WREMOGREEN™ L19Caprylic Capric TriglycerideBehenyl Alcohol
2.00%1.00%3.00%2.00%3.00%
C SEPIGEL 305™ 1.50%
D SilicaEthylhexylglycerinHydroxyacetophenoneCaprylyl GlycolPerfume
1.00%0.40%0.15%0.10%0.10%
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
More informations available on seppic.com
* Our stability protocols are available at your request.
AS40187 I RADIANT PURE MASK
Transparent Solution /Packaging: MaskpH: 6.8/ VISCOSITIES: 1M at RT: 500 mPa.s Brookfield S61-6 / Recovery at RT (after 1M at 45°C): 400 mPa.s Brookfield S61-6 /STABILITY: Stable M1 at RT, 45°C, 4°C and cycles -5°C/+40°C.
PROCEDURE ADVICES / Add carbomer to water under Vortex and stir at 600 rpm till uniform. Then add Sepimax ZEN and stir till uniform. Then add phase C, and stir with anchor at 200 rpm till uniform. DIsperse Hydroxyethylcellulose in cold water and stir while heat to 80℃ till uniform in another beaker, then add phase E to phase D and stir till uniform, add phase F and G to phase D+E when cooling down at 50℃ while stirring at 400 rpm. Add phase D+E+F+G to phase A+B+C and stir with anchor at 200 rpm till uniform.
©U
NS
PLA
SH
SEPIMAX ZEN™ (Polyacrylate Crosspolymer-6)
Powder polymer with a MAXIMUM resistance to electrolytes thanks to its high associative behavior. Stable from pH 2 to 8, it enables the creation of formulas with a specific skin feeling, included foaming formulas: rich, velvety and elegant. It is now possible to formulate transparent aqueous gels, cream-gels and emulsions with any kind of active ingredients and to achieve ZEN.
SEPIWHITE™ MSH (Undecylenoyl Phenylalanine) A lightening active ingredient acting through an original pathway. Alpha MSH antagonist (“Melanotropin”), it decreases effectively the melanic pigments by respecting the cutaneous integrity. Ecocert approved.
AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol) AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted, water circulation is improved in all skin layers and water loss is reduced (in vitro and in vivo tests prove this efficacy). It’s mechanism of action has been validated by cosmetogenomics. Cosmos and Natrue approved.
ORAMIX™ CG 110 (Caprylyl / Capryl Glucoside) Non-ionic surfactant from vegetable origin. It is an ideal solubilizing agent for foaming products because it solubilizes essential oils, fragrances and preservatives. Ecocert, Cosmos and Natrue approved.
A Pure WaterCarbomer
Up to 100%0.05%
B SEPIMAX™ ZEN 0.10%
C Tromethamine 0.05%
D Pure WaterHydroxyethylcellulose
30.00%0.10%
E SEPIWHITE™ MSHTromethamine
0.20%0.09%
F AQUAXYL™Butylene GlycolHydroxyacetophenone 1,2-HexanediolEthylhexylglycerin
0.50%3.00%0.20%0.40%0.10%
G ORAMIX™ CG 110 0.10%
ADDITIONAL INGREDIENTS: Carbomer: Carbopol 981(Lubrizol)/ Hydroxyethylcellulose: Natrosol 250 HHR PC (Ashland)/Tromethamine: Tromethamine(Angus)/ Hydroxyacetophenone : Microcare® Antioxidant HAP (THOR) / 1,2-Hexanediol: Microcare® Emollient HXD (THOR) /Ethylhexylglycerin : Microcare® Emollient EHG (THOR) /
LZ213311 - 2108
Skin radiancewhitening
Crystal clear
SEPIWHITE™ MSH allows to make a crystal clear gel mask which brings your skin radiance.
NATURALITY PROFILE
according to ISO 16 128 norm
NOC= 99,3%
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
SEPIMAX ZEN™
the Mask SensorialKick!
26
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
COLD PROCESS .
More informations available on seppic.com
A WaterHydroxyethyl CelluloseButanediol
Up to 100%0.20%3.00%
B HydroxyacetophenoneEthylhexylglycerin
0.30%0.15%
* Our stability protocols are available at your request.
AS40190A I SEPIMAX ZEN™ Sensorial Mask Kit0.2% Hydroxyethyl Cellulose
Transparent liquid /maskpH: 5.6 / VISCOSITIES: 1M at RT: 125 mPa.s Brookfield S61 V6Recovery at RT (after 1M at 45°C): 70 mPa.s Brookfield S61 V6STABILITY: M1 at RT, 45°C
FORMULATION ADVICES / Mix phase A under defloculator stirring at 150~300 rpm until homogeneous. Add phase B to A under defloculator stirring at 150 rpm until homogeneous.
Sepimax Zen real sensorial enhancer
Increase drying time for increase moisture perception
How SEPIMAX ZEN can be used as sensorial enhancer in sheet masks
for additional Moisture & Confort sensations!
ADDITIONAL INGREDIENTS: NATROSOL 250 HHR hydroxyethyl cellulose (ASHLAND ) / MICROCARE Antioxydant HAP Hydroxyacetophenone (THOR) / Butanediol/ MICROCARE Emollient EHG EthylhexylGlycerin (THOR)
©U
NS
PLA
SH
Hanging test : the more the mask hangs the best it is for perceived moisturization by mask user (24h soak /1h hang)
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
COLD PROCESS .
More informations available on seppic.com
A WaterHydroxyethyl CelluloseButanediolSEPIMAX ZEN™
Up to 100%0.20%3.00%0.10%
B HydroxyacetophenoneEthylhexylglycerin
0.30%0.15%
* Our stability protocols are available at your request.
AS40190B I SEPIMAX ZEN™ Sensorial Mask Kit0.2% Hydroxyethyl Cellulose + 0.1% SEPIMAX ZEN™
Transparent liquid /maskpH: 5.6 / VISCOSITIES: 1M at RT: 925 mPa.s Brookfield S61 V6Recovery at RT (after 1M at 45°C): 560 mPa.s Brookfield S61 V6STABILITY: M1 at RT, 45°C
FORMULATION ADVICES / Mix phase A under defloculator stirring at 150~300 rpm until homogeneous. Add phase B to A under defloculator stirring at 150 rpm until homogeneous.
Sepimax Zen real sensorial enhancer
Increase drying time for increase moisture perception
How SEPIMAX ZEN™ can be used as sensorial enhancer in sheet masks
for additional Moisture & Confort sensations!
ADDITIONAL INGREDIENTS: NATROSOL 250 HHR hydroxyethyl cellulose (ASHLAND ) / MICROCARE Antioxydant HAP Hydroxyacetophenone (THOR) / Butanediol/ MICROCARE Emollient EHG EthylhexylGlycerin (THOR)
©U
NS
PLA
SH
Hanging test : the more the mask hangs the best it is for perceived moisturization by mask user (24h soak /1h hang)
SEPIMAX™ ZEN (Polyacrylate Crosspolymer-6)Pre-neutralized powder polymeric thickener with a MAXIMUM resistance to electrolytes thanks to its high associative behavior. Efficient on a wide range of pH from 3 to 8, it is able to formulate transparent aqueous gels. It imparts rich, velvet and elegant skin feel.
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
COLD PROCESS .
More informations available on seppic.com
A WaterXanthan GumButanediol
Up to 100%0.10%3.00%
B HydroxyacetophenoneEthylhexylglycerin
0.30%0.15%
* Our stability protocols are available at your request.
AS40190C I SEPIMAX ZEN™ Sensorial Mask Kit0.1% Xanthan Gum
Transparent liquid /maskpH: 5.36 / VISCOSITIES: 1M at RT: 200 mPa.s Brookfield S61 V6Recovery at RT (after 1M at 45°C): 120 mPa.s Brookfield S61 V6STABILITY: M1 at RT, 45°C
FORMULATION ADVICES / Mix phase A under defloculator stirring at 150 rpm until homogeneous. Add phase B to A under defloculator stirring at 150 rpm until homogeneous.
Sepimax Zen real sensorial enhancer
Increase drying time for increase moisture perception
How SEPIMAX ZEN can be used as sensorial enhancer in sheet masks
for additional Moisture & Confort sensations!
ADDITIONAL INGREDIENTS: KELTROL CG Xanthan Gum (CP KELCO ) / MICROCARE Antioxydant HAP Hydroxyacetophenone (THOR) / Butanediol / MICROCARE Emollient EHG EthylhexylGlycerin (THOR)
©U
NS
PLA
SH
Hanging test : the more the mask hangs the best it is for perceived moisturization by mask user (24h soak /1h hang)
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
COLD PROCESS .
More informations available on seppic.com
A WaterXanthan GumButanediolSEPIMAX ZEN™
Up to 100%0.10%3.00%0.10%
B HydroxyacetophenoneEthylhexylglycerin
0.30%0.15%
* Our stability protocols are available at your request.
AS40190D I SEPIMAX ZEN™ Sensorial Mask Kit0.1% Xanthan Gum + 0.1% SEPIMAX ZEN™
Transparent liquid /maskpH: 5.36 / VISCOSITIES: 1M at RT: 1300 mPa.s Brookfield S61 V6Recovery at RT (after 1M at 45°C): 700 mPa.s Brookfield S61 V6STABILITY: M1 at RT, 45°C
FORMULATION ADVICES / Mix phase A under defloculator stirring at 150 rpm until homogeneous. Add phase B to A under defloculator stirring at 150 rpm until homogeneous.
Sepimax Zen real sensorial enhancer
Increase drying time for increase moisture perception
How SEPIMAX ZEN™ can be used as sensorial enhancer in sheet masks
for additional Moisture & Confort sensations!
ADDITIONAL INGREDIENTS: NATROSOL 250 HHR hydroxyethyl cellulose (ASHLAND ) / MICROCARE Antioxydant HAP Hydroxyacetophenone (THOR) / Butanediol/ MICROCARE Emollient EHG EthylhexylGlycerin (THOR)
©U
NS
PLA
SH
Hanging test : the more the mask hangs the best it is for perceived moisturization by mask user (24h soak /1h hang)
SEPIMAX™ ZEN (Polyacrylate Crosspolymer-6)Pre-neutralized powder polymeric thickener with a MAXIMUM resistance to electrolytes thanks to its high associative behavior. Efficient on a wide range of pH from 3 to 8, it is able to formulate transparent aqueous gels. It imparts rich, velvet and elegant skin feel.
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
COLD PROCESS .
More informations available on seppic.com
A WaterCarbomerButanediolTromethamine
Up to 100%0.02%3.00%0.01%
B HydroxyacetophenoneEthylhexylglycerin
0.30%0.15%
* Our stability protocols are available at your request.
AS40190E I SEPIMAX ZEN™ Sensorial Mask Kit0.02% Carbomer
Transparent liquid /maskpH: 6.5 / VISCOSITIES: 1M at RT: 900 mPa.s Brookfield S61 V6Recovery at RT (after 1M at 45°C): 400 mPa.s Brookfield S61 V6STABILITY: M1 at RT, 45°C
FORMULATION ADVICES / Mix phase A under defloculator stirring at 150~300 rpm until homogeneous. Add phase B to A under defloculator stirring at 150 rpm until homogeneous.
Sepimax Zen real sensorial enhancer
Increase drying time for increase moisture perception
How SEPIMAX ZEN can be used as sensorial enhancer in sheet masks
for additional Moisture & Confort sensations!
ADDITIONAL INGREDIENTS: CARBOPOL 980 Carbomer (Lubrizol) / MICROCARE Antioxydant HAP Hydroxyacetophenone (THOR) / Butanediol / MICROCARE Emollient EHG EthylhexylGlycerin (THOR)
©U
NS
PLA
SH
Hanging test : the more the mask hangs the best it is for perceived moisturization by mask user (24h soak /1h hang)
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
COLD PROCESS .
More informations available on seppic.com
A WaterCarbomerTromethamineButanediolSEPIMAX ZEN™
Up to 100%0.02%0.01%3.00%0.10%
B HydroxyacetophenoneEthylhexylglycerin
0.30%0.15%
* Our stability protocols are available at your request.
AS40190F I SEPIMAX ZEN™ Sensorial Mask Kit0.02% Carbomer + 0.1% SEPIMAX ZEN™
Transparent liquid /maskpH: 5.36 / VISCOSITIES: 1M at RT: 1300 mPa.s Brookfield S61 V6Recovery at RT (after 1M at 45°C): 700 mPa.s Brookfield S61 V6STABILITY: M1 at RT, 45°C
FORMULATION ADVICES / Mix phase A under defloculator stirring at 150~300 rpm until homogeneous. Add phase B to A under defloculator stirring at 150 rpm until homogeneous.
Sepimax Zen real sensorial enhancer
Increase drying time for increase moisture perception
How SEPIMAX ZEN™ can be used as sensorial enhancer in sheet masks
for additional Moisture & Confort sensations!
ADDITIONAL INGREDIENTS: Carbopol 980 carbomer (Lubrizol) / MICROCARE Antioxydant HAP Hydroxyacetophenone (THOR) / Butanediol/ MICROCARE Emollient EHG EthylhexylGlycerin (THOR)
©U
NS
PLA
SH
Hanging test : the more the mask hangs the best it is for perceived moisturization by mask user (24h soak /1h hang)
SEPIMAX™ ZEN (Polyacrylate Crosspolymer-6)Pre-neutralized powder polymeric thickener with a MAXIMUM resistance to electrolytes thanks to its high associative behavior. Efficient on a wide range of pH from 3 to 8, it is able to formulate transparent aqueous gels. It imparts rich, velvet and elegant skin feel.
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022 33
Senses in actionto relax & soothe
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022 34
Well being key focus!
JAPAN - anti aging as a must
Conservative marketWhitening, wrinkle correctionSun protectionPore minimizing
KOREA - “N” Time Easy & Multiful to use
Stick balmSmall Luxury itemsRituals for wellbeingZero plasticConsumer experience
AMORE PACIFIC Onhope Relaxing rituals
NATURIESkin conditioning gel
EUROPE - Healthy not perfect skin
CareComfortProtectCocoon
LA ROCHE POSAY Age Correct Tinted SPF 50
USA - Technological innovation
MicroneedlingLaser for pigmentationRadiofrequency=> need for CARE and HEALING
Sarah Chapman - SKINESISMeso Melt Infusion System
CHINA - Global skin care program
Training program for the skinSearch for inside and out + bodyPre-CareSpecialist consultancyAt home routine=> long term results
AVENE Retinal 0.1
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
Senses activation
Resurect evening rituals
To improve sleep and decrease stress,
interest of Aromatherapy
reduce anxiety with trusted ingredients
Eco efficiency
To help strengthen brand image. Be
credible and push brand’s achievement
and goals on sustainability
Silver generation
More into online shopping, search for comfort and healthy
aging. Dedicated care for menopause on the
rise. In search of comfortable textures
BIRCH BoxMood improve set for sleep
Zeila Minimalism with African Qasil
leaf powder
FENTY Beauty Gel- CreamGender neutral, vegan clean
skincare line
PAUSEHot flash cooling mist,
collagen booster, fascia stimulation
GARNIERincorporates goals to bolster
eco-friendly reputation
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
.More informations available on seppic.com
* Our stability protocols are available at your request.
AS40093B I MY ICONIC HAND CREAM
White Cream / Challenge test: Criteria A / Packaging: Jar
pH: 5.8 / VISCOSITIES: D7 at RT: 124 000 mPa.s Brookfield LV4-6 Recovery at RT (after 1M at 45°C): mPa.s Brookfield LV4-6STABILITY: Stable M1 at RT, 45°C, -18°C and cycles -5°C/+40°C.
FORMULATION ADVICES / Weigh phase A and B and heat them to 85°C. Add phase C to B, and then add phase A to phase B+C, homogenize it by Silverson rotor-stator 4000 rpm for 4 minutes. Cool down under anchor stirring 100 rpm without water bath for 10 minutes and followed with water bath cooling for another 10 minutes. Add phase D one by one below 45°C and stir till uniform. Stop stirring at 30°C.
4a
ADDITIONAL INGREDIENTS: Glycerin - Pricerine 9091 (KARRY) /BUTYROSPERMUM PARKII (SHEA BUTTER): Lipex Shea (AAK)/ROSMARINUS OFFICINALIS (ROSEMARY) LEAF EXTRACT:Duralax Oxidation management blend NH10 (Kalsec)/ Phenoxyethanol (and) Ethylhexylglycerin: Euxyl PE 9010 (S&M)/ Ethylhexylglycerin and Caprylyl glycol: Euxyl SC 10( S&M)/Fragrance: Frag276148(Drom)
AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol) AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted, water circulation is improved in all skin layers and water loss is reduced (in vitro and in vivo tests prove this efficacy). It’s mechanism of action has been validated by cosmetogenomics. Cosmos and Natrue approved.
SEPINOV™ WEO(Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer )Pre-neutralized powder polymeric thickener on a wide pH range (3-12) and compatible with Ethylene Oxide free formulas. It has good resistance to electrolytes and imparts a light, satin-like skin feel.
MONTANOV™ 202 Arachidyl Alcohol and Behenyl Alcohol and Arachidyl GlucosideGlucolipid emulsifier derived from vegetable origin. Promoter of liquid crystals, it plays a role in maintaining skin moisturization over time. Thanks to liquid crystals which contain water, MONTANOV™ 202 helps to keep skin moisturized. Ecocert and Natrue approved.
SOLAGUM™ AX Acacia Senegal Gum and Xanthan Gum Smart combination of natural thickening polymers. SOLAGUM™ AX also displays emulsifying properties that allow to stabilize up to 15% of oils. Can be used with hot or cold process. Ecocert and Natrue approved, it is the perfect ally for all natural formulation.
EMOGREEN™ L19 C15-19 Alkane (Plant-based & Renewable)EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue.
©U
NS
PLA
SH
Deep Moisturizing and Repair
with
30% Emollients
LZ201603 - 2005
Excellent skin protection thanks to Liquid crystals, EMOGREEN™ L19 and 20% SHEA BUTTER
A D.I. WaterGlycerin1,3-Butylene GlycolSOLAGUM™ AX
Up to 100%3.00%3.00%0.30%
B MONTANOV™ 202Butyrospermum Parkii (Shea Butter)EMOGREEN™ L19
4.00%20.00%10.00%
C SEPINOV™ WEO 0.70%
D AQUAXYL™Rosmarinus Officinalis (Rosemary) Leaf extractPhenoxyethanol and EthylhexylglycerinEthylhexylglycerin and Caprylyl GlycolFragrance
1.50%
0.20%0.70%0.30%0.20%
NATURALITY PROFILE
according to ISO 16128 norm
NOC= 98,3%
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
MAKE UP
MAKE UP GB
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
More informations available on seppic.com
A Aqua/WaterSEPIPLUS™ SAQUAXYL™ EQUIBIOME™ Glycerin
Up to 100%1.60%1.50%1.00%3.00%
B EASYNOV™ SEPIMAT™ H10EMOSMART™ L15EMOSMART™ L19Phenoxyethanol and EthylhexylglycerinFragranceTitanium Dioxide and Stearoyl Glutamic acidCI 77288
2.00%1.00%2.00%3.00%0.80%
0.10%2.00%
0.40%
Green GELTRAP™/ Packaging: PumppH: NA / VISCOSITIES: 1M at RT: 32 000 mPa.s Brookfield S4S6 / Recovery at RT (after 1M at 45°C): 31 000 mPa.s Brookfield S4S6STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C./ after centrifugation (3000 rpm 20 minutes)
FORMULATION ADVICES / Add water and SEPIPLUS™ S into the maint tank and homogenize (3000 rpm, 4 minutes). Add the rest of phase A into the tank and stir (50 rpm, 15 minutes). In a separate beaker, mix phase B by IKA (Ultra Turrax T25) rotor stator 9500 rpm for 4 mn. Add phase B into phase A and start agitation to homogenize (50 rpm, 20 minutes).
Universal coverage non drying and comfortable, with Microbiome respect.
Thank you GELTRAP™!
ADDITIONAL INGREDIENTS: Phenoxyethanol and Ethylhexylglycerin EUXYL PE9010 (SCHULKE & MAYR) / Fragrance 86395991 (DROM)/ CI 77288 Chromium Oxide Green Unipure Green LC 788 (SENSIENT)/ Titanium Dioxide and Stearoyl Glutamic Acid BTD ASG2 (KOBO)
SEPIPLUS™ S (Hydroxyethyl Acrylate/ Sodium Acryloyldimethyl Taurate Copolymer and Polyisobutene and PEG-7 Trimethylolpropane Coconut Ether)) Pre-neutralized and concentrated liquid polymeric thickener on a wide range of pH (3 to 12). It offers excellent resistance to electrolytes. It can be used to formulate soft and rich textures that impart absolute comfort to the skin
AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol) AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted, water circulation is improved in all skin layers and water loss is reduced (in vitro and in vivo tests prove this efficacy). It’s mechanism of action has been validated by cosmetogenomics. Cosmos and Natrue approved.
EQUIBIOME™(Propylene Glycol and Arctium Lappa Root Extract) Extracted from the roots of Great Burdock (Arctium lappa), EQUIBIOME™ is an active ingredient maintaining the delicate skin-microbiota equilibrium for a perfect and harmonious skin. Tested in vivo & in vitro, EQUIBIOME™ has shown powerful soothing properties and reinforces skin barrier.
EASYNOV™ (Octyldodecanol and Octyldodecyl Xyloside and PEG-30 Dipolyhydroxystearate) Liquid lipophilic emulsifier. EASYNOV™ realizes emulsions with an internal gelled aqueous phase extra-rich in water by a cold process with gentle stirring: the GELTRAP™ emulsions. This novel formulation form offers surprising textures, marrying freshness and cushion effect.
SEPIMAT™ H10 (Methyl Methacrylate Crosspolymer and Paraffinum Liquidum and Silica)
SEPIMAT™ H10 is a hollow lipodispersible powder with excellent absorbent and matifying properties. Its hemispherical shape makes it easy to press and perfect for loose, hot poured and pressed powder applications.
EMOSMART™ L15 (C13-15 Aljane) EMOSMART™ L19 (C15-19 Aljane)EMOSMART™ L15 is a high-purity, non polar, and biodegradable emollient. This high purity alkane shows an excellent compatibility with all types of oils, especially with silicone oils. It gives a fresh and vanishing texture with a dry and matt afterfeel. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…)
EMOSMART™ L19 is a high-purity, non polar and biodegradable emollient. It shows an excellent compatibility with all types of oils and helps to disperse minerals (TiO2/ZnO). It gives a fresh and vanishing texture with a matt afterfeel. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).
AS40107 I TWIST YOUR FACEColor correcting GELTRAP™
Transforming texture with GELTRAP™ technology
Color change, comfort and excellent coverage without drying
Room Temperature
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
* Our stability protocols are available at your request.
AS40141B I MARINE POWER CELL RECOVERY SERUM
Translucent grey pourable emulsion/ Packaging: DropperpH: 5.4/ VISCOSITIES: 1M at RT: 6,000 mPa.s Brookfield LV1-6 / Recovery at RT (after 1M at 45°C): 5, 800 mPa.s Brookfield LV1-6.STABILITY: Stable 1M at RT, 45°C, -18°C and cycles -5°C/+40°C.
4a
A D.I. WaterSOLAGUM™ TARASodium Hyaluronate
Up to 100%0.08%0.05%
B MONTANOV™ LLANOL 99EMOGREEN™ L15Hydrogenated Polyisobutene
0.80%0.60%2.80%0.60%
C SIMULGEL™ INS 100 2.20%
D 1,3 Butylene GlycolGlycerinCERAMOSIDES™ HP1,2 HexanediolHydroxyacetophenone
2.00%8.00%0.20%0.40%0.40%
E AQUAXYL™OLIGOGELINE™ SPETALADVANCE™CELTOSOME™ CRITHMUM MARITIMUMCELTOSOME™ ERYNGIUM MARITIMUMTocopherol HoneyFragrance
0.50%0.50%3.00%0.20%0.05%0.20%0.30%0.03%
ADDITIONAL INGREDIENTS: 1,2 Hexanediol : Effsin HD(Schülke & Mayr)- Hydroxyacetophenone:Effsin HDASchülke & Mayr)- Fragrance: Frag435243 (DROM)-Sclerotium Gum: Acitgum CS11 QD (CarGill)-Sodium Hyaluronate: Sodium Hyaluronate (Freda)-Dimethicone: PMX 200 350cst (Dowcorning)-Hydrogenated Polyisobutene: Palatane L-14E (Vatange)-Tocopherol : Tocopherol(DSM)-Honey: Honey (Guanshengyuan)
MONTANOV™ L (C14-22 Alcohols and C12-20 Alkyl Glucoside)Glucolipid emulsifier in harmony with nature. MONTANOV L is well-suited to formulate different textures (from sprayable to butter cream) no matter the nature or the quantity of fatty phase used. It stabilizes emulsions, and has a strong moisturizing power since it promotes liquid crystals which prevent the skin from dehydration (efficacy proven in vivo). Ecocert and Natrue approved.SIMULGEL™ INS 100 (Hydroxyethyl Acrylate / Sodium Acryloyldimethyl Taurate Copolymer and Isohexadecane and Polysorbate 60)Pre-neutralized liquid polymeric thickener on a wide range of pH (3 to 12). It provides also excellent oil stabilizing effect. Versatile and efficient, SIMULGEL™ I-NS 100 is used to develop from sprayable, extra-liquid to very thick formulas. It creates melting textures with a fresh skin feel.SOLAGUM™ TARA (Caesalpinia Spinosa Gum)A powerful thickening natural gum from Caesalpinia spinosa endosperm seeds. Synergistic efficiency with synthetic and natural polymers. Ecocert, Cosmos and Natrue approved.AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol ) AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).OLIGOGELINE™ SPE(Chondrus crispus extract)Second skin ingredient: binds carrageenans and skin proteins, moisturizing skin and reduce TEWL, re-mineralizing because of high calcium content (antiagiing & slimming).CERAMOSIDES™ HP (Triticum vulgare (Wheat) seed extract)The essence of perfect skin. CERAMOSIDES™ HP are an original combination (patented) of natural CERAMIDES and OMEGA which protect the skin from the loss of elasticity, one of the primary causes of enlarged pores with age. After 56 days of treatment, the skin roughness is smoothed (-73% skin roughness) and the pores are visibly smaller.TALADVANCE™ (Glycerin - Aqua/Water - Centella Asiatica Leaf Extract)Centella asiatica extract, it regulates the cellular cycle in the epidermis, increases fibroblast functionality & protects the dermis. It provides a flash & long-lasting radiance for a perfect complexion!CELTOSOME™ CRITHMUM MARITIMUM(Crithmum Maritimum Callus Culture Filtrate)Pure Sea Fennel stem cells which acts on the prevention of skin aging & cutaneous pigmentation (in vivo study).CELTOSOME™ ERYNGIUM MARITIMUM ( Eryngium Maritimum Callus Culture FiltratePure marine plant stem cells (hydrodispersible powder form) to act on multiple factors of skin aging. Reinforces the dermo epidermal junction (self evaluation in vivo study on firmness)LANOL 99 (Isononyl Isononanoate)Emollient agent. Polar ester. Soft and light touch, non greasy finish and short play-time.
EMOGREEN™ L15 (C15-19 Alkane (Plant-based & Renewable) is a non polar and biodegradable, plant-based emollient. It’s THE alternative to volatile silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue.FORMULATION PROCESS ADVICES / Mix phase A well till uniform. Weigh phase
B. Heat phase A and phase B to 75°C. Add phase C to phase B, add phase A to phase B+C, then homogenize it for 4 minutes at 4000 rpm by Silverson. Stir the emulsion under anchor stirring 150 rpm. Pre-mix phase D, heat and stir it at 80°C water bath till CERAMOSIDES™ HP and Hydroxyacetophenone dissolve well. Add phase D into the emulsion and stir till 30°C, add phase E one by one separately and stir it for 20 min till uniform.
Strong efficacy with CELTOSOME™ unique technology!
Baby skin feelMultifunction
CELTOSOME™ Technology2 Million cells in 1gr of Serum (daily use)
LZ211701-2105
NATURALITY PROFILE
according to ISO 16 128 norm
NOC= 96,5%
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
* Our stability protocols are available at your request.
AS40151A I RESIST TRACES OF AGING
Pink Clear Liquid Oil / Packaging: DropperVISCOSITIES: 1M at RT: < 50 mPa.s Brookfield LV1-6 / Recovery at RT (after 1M at 45°C): <50 mPa.s Brookfield LV1-6.STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C.
2
4a
4b
©U
NS
PLA
SH
A SEPILIFT™ DPHPOctyldodecanol
0.50%50.00%
B Tocopheryl acetate 0.50%
C Helianthus Annuus (SUNFLOWER) Seed OilCaprylic Capric TriglycerideEMOGREEN™ L19Lithospermum ErythrorhizonPerfume
15.00%3.99%
30.00%0.01%0.10%
ADDITIONAL INGREDIENTS: Octyldodecanol – Eutanol G (BASF) / Lithospermum Erythrorhizon - (GNL)/Helianthus Annuus (SUNFLOWER) Seed Oil(YQ TECH)/ Caprylic Capric Triglyceride:Myritol 318(BASF)/ Tocopheryl acetate:()DSM)/ Perfume: Frag 86413672( Drom)
SEPILIFT™ DPHP (Dipalmitoyl Hydroxyproline) Plant-derived hydroxyproline "Lipovector". An anti-wrinkle ingredient, it moisturizes the skin and reduces the appearance of visible signs of aging (effectiveness proven in vivo). SEPILIFT™ DPHP firms skin tissues by stimulating the contraction of the collagen fibers. It protects dermal fibers from enzymatic lysis and exerts an anti-free radical action. SEPILIFT™ DPHP has intrinsic emulsifying properties and also gives the emulsion a specific feel. Ecocert and Nature approved.
EMOGREEN™ L19 (C15-19 Alkane (Plant-based & Renewable ) EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. It gives a fresh and gliding touch, with a soft afterfeel. Inert and stable.
FORMULATION PROCESS ADVICES / Mix phase A well, heat it with 80°C water bath and stir it till SEPILIFT™ DPHP dissolves well. Add phase B, C in phase A separately and stir the system under anchor stirring 150 rpm for 10 min or till uniform.
Say goodbye to wrinkles thanks to the SEPILIFT™ DPHP.
Booster in Pro Base or use Essence itself
DIY skin care
Anti-Wrinkle
LZ214703-2112
NATURALITY PROFILE
according to ISO 16 128 norm
NOC= 99,9%
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
A formula related to NATURAL COSMETICS concept.More informations available on seppic.com
* Our stability protocols are available at your request.
AS40154 I NATURAL CARE BUTTER
White Thick Cream /Challenge test: Criteria A /Packaging: JarpH: 5.5/ VISCOSITIES: 1M at RT: 612 000 mPa.s Brookfield LV T96-6 / Recovery at RT (after 1M at 45°C): 692 000 mPa.s Brookfield LV T96-6.STABILITY: Stable M3 at RT, 45°C, -18°C and cycles -5°C/+40°C.
PROCEDURE ADVICES / Weigh ingredients of phase A and heat to 80℃. Disperse SOLAGUM™ TARA in water and heat phase B to 80℃. Pre-disperse phase C in phase A, add phase B into phase A+C, homogenize it by Silverson at 4000 rpm for 5 minutes. Stir the emulsion under anchor stirring 100 rpm for 10 min. Mix phase E until clear. Add phase D, E and F into the emulsion and stir it under anchor stirring at 150 rpm until uniform. Hot-fill in jars.
©U
NS
PLA
SH
MONTANOV™ 202 (Arachidyl Alcohol and Behenyl Alcohol and Arachidyl Glucoside )
Glucolipid emulsifier derived from vegetable origin. Promoter of liquid crystals, it plays a role in maintaining skin moisturization over time. Thanks to liquid crystals which contain water, MONTANOV™ 202 helps to keep skin moisturized. Ecocert and Natrue approved. AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol )
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).MADECASSOSIDE (Madecassoside)
MADECASSOSIDE is a pure active from Centella asiatica that soothes and brings comfort to sensitive skin and atopic-prone skin (in vivo results on psoriasis & atopic dermatitis-prone skin). EMOGREEN™ L15 (C15-19 Alkane (Plant-based & Renewable))
MOGREEN™ L15 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to volatile silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue.Beyond the lightweight and non-greasy skin feel, it gives a powdery finish. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).
SOLAGUM™ TARA (Caesalpinia Spinosa Gum)
A powerful thickening natural gum from Caesalpinia spinosa endosperm seeds. Synergistic efficiency with synthetic and natural polymers. Ecocert, Cosmos and Natrue approved.SEPILIFE™ NUDE (Sodium Acrylate/Sodium Acryloyl Dimethyl Taurate Copolymer and C15-19 Alkane and Polyglyceryl-6 Laurate and Polyglycerin-6)
Pre-neutralized liquid polymeric thickener on a wide range of pH (5.5 to 12). It also emulsifies and stabilizes all types of oily phases with a cold process. This polymer has 61% of natural origin content according to ISO 16128. Its improved biodegradability makes it possible to formulate readily biodegradable finish products. SEPILIFE™ NUDE allows formulating from sprayable to thick textures, with a quick-break effect and a nude skin feel, for all your natural concept cosmetics.
SEPILIFT™ DPHP (Dipalmitoyl Hydroxyproline)
Plant-derived hydroxyproline "Lipovector". An anti-wrinkle ingredient, it moisturizes the skin and reduces the appearance of visible signs of aging (effectiveness proven in vivo). SEPILIFT™ DPHP firms skin tissues by stimulating the contraction of the collagen fibers. It protects dermal fibers from enzymatic lysis and exerts an anti-free radical action. SEPILIFT™ DPHP has intrinsic emulsifying properties and also gives the emulsion a specific feel. Ecocert and Natrue approved.
A MONTANOV™ 202EMOGREEN™ L15Caprylic Capric TriglycerideHydrogenated Olive Oil Decyl EstersC10-18 TriglycerideBees Wax Carnauba Acid WaxButyrospermum Parkii (Shea Butter)TribeheninSEPILIFT™ DPHPTocopherol
3.00%10.00%
4.00%1.00%1.00%1.00%0.60%2.80%2.20%1.00%0.30%
B Pure WaterSOLAGUM™ TARAGlycerinL-Arginine
Up to 100.00%0.15%4.00%0.10%
C SEPILIFE™ NUDE 2.20%
D AQUAXYL™Phenoxyethanol & Chlorphenesin & Glycerin
3.00%0.80%
E MADECASSOSIDEPure Water
0.20%2.00%
F Lavandula Angustifolia (LAVENDER) OilROSMARINUS OFFICINALIS (ROSEMARY) LEAF OIL
0.05%0.05%
ADDITIONAL INGREDIENTS: Caprylic capric triglyceride - Myritol 318 (BASF )/ C10-18 Triglyceride - DUB CIRE H1 (DUB ) / Hydrogenated Olive Oil Decyl Esters (Vatange)/ Bees Wax (Kahl)/ Carnauba Acid Wax (Kahl)/ Butyrospermum Parkii (Shea Butter): Lipex shea( AAK)/ Tocopherol: (DSM)/ Tribehenin: Lipovol GBT (Vantage)/Phenoxyethanol & Chlorphenesin & Glycerin :Microcare PHC (Thor) /Lavandula Angustifolia (LAVENDER) Oil (Puen) /ROSMARINUS OFFICINALIS (ROSEMARY) LEAF OIL(Puen).
MONTANOV™ 202 associated with SEPILIFE™ NUDE stabilizes the oily phase and provides liquid crystal structure
which offers long term moisturizing effect combined with AQUAXYL™!
LZ203001 - 2007
NATURALITY PROFILE
according to ISO 16128 norm
NaturalMoisturization
Soothing
NOC= 99,1%
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
* Our stability protocols are available at your request.
AS40158 I RESIST TRACES SMOOTHER
White Fluid Serum/ Challenge test: Criteria A / Packaging: PumppH: 5.4/ VISCOSITIES: 1M at RT: 2400 mPa.s Brookfield LV1-6 / Recovery at RT (after 1M at 45°C): 2200 mPa.s Brookfield LV1-6.STABILITY: Stable M1 at RT, 45°C, -18°C and cycles -5°C/+40°C.
2
4a
4b
©U
NS
PLA
SH
A D.I. WaterSOLAGUM™ AXGlycerinL-Arginine
Up to 100%0.30%3.00%0.10%
B EMOGREEN™ L19SEPILIFT™ DPHPPrunus Amygdalus Amygdalus Dulcis (Sweet Almond) OilTocopherol
2.00%1.00%
3.00%0.20%
C SEPINOV™ EMT 10 0.80%
D Aloe Barbadensis Leaf Powder (200:1)Water
0.05%2.00%
E AQUAXYL™ASPAR'AGE™Phenoxyethanol and Caprylyl Glycol Fragrance
1.50%2.00%0.80%0.06%
ADDITIONAL INGREDIENTS: Prunus Amygdalus Dulcis (Sweet Almond) Oil– Lipovol ALM(LIPO) / Aloe Barbadensis Leaf Powder: 200:1 clear Aloe Powder( Aloecorp )/ L-Arginine(guoyao)/ Tocopherol(DSM)/ Phenoxyethanol and Caprylyl Glycol : Microcare PHG(Thor)
SEPILIFT™ DPHP (Dipalmitoyl Hydroxyproline) Plant-derived hydroxyproline "Lipovector". An anti-wrinkle ingredient, it moisturizes the skin and reduces the appearance of visible signs of aging (effectiveness proven in vivo). SEPILIFT™ DPHP firms skin tissues by stimulating the contraction of the collagen fibers. It protects dermal fibers from enzymatic lysis and exerts an anti-free radical action. SEPILIFT™ DPHP has intrinsic emulsifying properties and also gives the emulsion a specific feel. Ecocert and Nature approved.
EMOGREEN™ L19 (C15-19 Alkane (Plant-based & Renewable ) EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. It gives a fresh and gliding touch, with a soft afterfeel. Inert and stable.
AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol ) AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).
ASPAR’AGE™(Aqua/Water and Propanediol and Asparagosis Armata Extract)ASPAR’AGE™, an extract of Asparagopsis armata, regulates the effect of "Senescent Messaging Secretome" in order to reduce the contagious aging on young cells. Thanks to this marine active, the skin looks younger!
SEPINOV™ EMT 10 (Hydroxyethyl Acrylate / Sodium Acryloyldimethyl Taurate Copolymer)
Pre-neutralized powder polymeric thickener on a wide pH range (3-12). It provides also excellent oil stabilizing property even in presence of a high percentage of oily phase. It imparts satiny and fresh skin feel. Excellent tolerance even for baby care, irritated skin, intimate hygiene and oral care. A universal choice!
SOLAGUM™ AX(Acacia Senegal Gum and Xanthan Gum )Combination of thickening polymers. Eco-friendly product developed in accordance with sustainable development. Can be used with hot or cold process. Ecocert and Natrue approved.
FORMULATION PROCESS ADVICES / Mix phase A and phase B separately well. Heat both phases with an 80°C water bath until SEPILIFT™ DPHP dissolved well. Add phase C into phase B, and add phase A into phase (B+C), homogenize under the Silverson rotor-stator at 4000 rpm for 4 minutes. Cool down under anchor stirring at 100 rpm. Add premixed phase D and phase E at 45°C Separately. Stop stirring when uniform.
Say goodbye to wrinkles thanks to SEPILIFT™ DPHP + ASPAR’AGE™ .
Boost Effect
Light Texture
Anti-Wrinkle
LZ202910-2007
NATURALITY PROFILE
according to ISO 16128 norm
NOC= 99,3%
A formula related to NATURAL COSMETICS concept.More informations available on seppic.com
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
* Our stability protocols are available at your request.
AS40160 I WHIPPED BODY BUTTER
Yellowish Cream/ Challenge test: Criteria A / Packaging: JarVISCOSITIES: 1M at RT: 268 000 mPa.s Brookfield T-E95-6 / Recovery at RT (after 1M at 45°C): 278 900 mPa.s Brookfield T-E95-6.STABILITY: M1 at RT, 45°C, -18°C and cycles -5°C/+40°C.
2
4a
©U
NS
PLA
SH
A D.I. WaterGlycerinTromethamine
Up to 100%3.00%0.18%
B MONTANOV™ 68 MBSENSANOV™ WREMOSMART™ V21LANOL™ 2681LANOL™ PCaprylic Capric TriglycerideButyrospermum Parkii (Shea Butter)
1.00%2.00%3.00%4.00%2.00%5.00%3.00%
C SEPIMAX™ ZENSEPIPLUS™ 400
0.15%1.40%
D AQUAXYL™HydroxyacetophenoneEthylhexylglycerinPhenoxyethanolNylon-66Unicert Yellow 08005-J (1% water solution)Unicert Yellow #4 (1% water solution)Fragrance
1.50%0.30%0.15%0.20%4.00%0.07%0.01%0.10%
ADDITIONAL INGREDIENTS: Caprylic capric triglyceride– Myritol® 318(BASF) / Ethyl ascorbyl Ether-Ethyl ascorbyl Ether(Anallerg)/ Hydroxyacetophenone-Microcare® Antioxidant HAP(THOR)/Ethylhexylglycerin - Microcare Emollient EHG (THOR)/ Phenoxyethanol- Microcare PE(THOR) / Nylon-66 - GBN 039(Cornnell Bros.)
MONTANOV™ 68 MB (Cetearyl Alcohol and Cetearyl Glucoside) Glucolipid emulsifier derived from vegetable origin. It can be used to formulate rich, smooth textures with any type of oil phase. Promoter of liquid crystals, it plays a role in maintaining skin moisturization over time. Ecocert, Cosmos and Natrue approved.
SENSANOV™ WR (C20-22 Alkyl Phosphate and C20-22 Alcohols ) Versatile phosphate anionic emulsifier effective at low dosage (1 to 3%). Provides a feeling of lightness followed by the sensation of a matt velvety veil which slowly envelops the skin. Finally SENSANOV™ WR emulsions leaves the skin supple with a long lasting sensation of comfort. This protective film sensation is reflected in vivo by a water-resistant effect for the development of sun care formulations. SENSANOV™ WR reduces oiliness of extra rich emulsion. Ideal for makeup products, SENSANOV™ WR is able to emulsify a high percentage of fillers keeping a perfectly smooth texture.
AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol ) AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).
EMOSMART™ V21(C18-21 Alkane)EMOSMART™ V21 is a high-purity, non polar and biodegradable emollient. It shows an excellent compatibility with all types of oils. It allows to obtain fresh textures with a soft finish and matt veil. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).
SEPIPLUS™ 400 (Polyacrylate-13 and Polyisobutene and Polysorbate 20 ) Pre-neutralized and concentrated liquid polymeric thickener on a wide range of pH (3 to 12). It imparts a slippery silicone-like feel and can be used to reduce the use of silicone in formulas. Due to this benefit, which makes it easy to spread, along with its perfect compatibility with various sunscreen coatings, it is ideal for sun care products.
SEPIMAX™ ZEN (Polyacrylate Crosspolymer-6) Pre-neutralized powder polymeric thickener with a MAXIMUM resistance to electrolytes thanks to its high associative behavior. Efficient on a wide range of pH from 3 to 8. It provides oil stabilizing effect and imparts rich, velvet and elegant skin feel.
LANOL™ 2681 (Coco-Caprylate/ Caprate) Emollient agent from vegetable origin. Polar ester with soft and light touch, non greasy finish, medium playtime. Cosmos approved. FORMULATION PROCESS ADVICES / Mix phase A well and phase B well, heat
them with 80°C water bath until dissolve well. Add phase C into phase B. Add phase A into phase B+C, homogenize at 4000 rpm for 4 minutes. Cool down to 45°C. Add phase D one by one under anchor stirring and stop stirring at 30°C.
Luxurious Sensory
Nourishing Texture
Moisturizing
LX202804-2007
NATURALITY PROFILE
according to ISO 16 128 norm
NOC= 89,9%
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
* Our stability protocols are available at your request.
AS40172 I SENSASKIN ANTI-FRICTION SPRAY
White Lotion/ Packaging: SpraypH: 5.0 / VISCOSITIES: 1M at RT: 10 000 mPa.s Brookfield S1-V6 / Recovery at RT (after 1M at 45°C): 20 500 mPa.s Brookfield S1-V6.STABILITY: M3 at RT, 45°C, -18°C and 1 month after cycles -5°C/+40°C.
4a
©U
NS
PLA
SH
A D.I. WaterGlycerinSodium Hydroxide (25% Water Solution)
Up to 100%3.00%0.51%
B SENSANOV™ WR 4.00%
C AQUAXYL™MADECASSOSIDEPhenoxyethanol & Chlorphenesin & Glycerin
1.00%0.20%0.80%
ADDITIONAL INGREDIENTS: Sodium Hydroxide (Guoyao) / Phenoxyethanol & Chlorphenesin & Glycerin : Microcare PHC (Thor)
SENSANOV™ WR (C20-22 Alkyl Phosphate and C20-22 Alcohols ) Versatile phosphate anionic emulsifier effective at low dosage (1 to 3%). Provides a feeling of lightness followed by the sensation of a matt velvety veil which slowly envelops the skin. Finally SENSANOV™ WR emulsions leaves the skin supple with a long lasting sensation of comfort. This protective film sensation is reflected in vivo by a water-resistant effect for the development of sun care formulations. SENSANOV™ WR reduces oiliness of extra rich emulsion. Ideal for makeup products, SENSANOV™ WR is able to emulsify a high percentage of fillers keeping a perfectly smooth texture.
AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol ) AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).
MADECASSOSIDE (Madecassoside) MADECASSOSIDE is a pure active from Centella asiatica that soothes and brings comfort to sensitive skin and atopic-prone skin (in vivo results on psoriasis & atopic dermatitis-prone skin).
FORMULATION PROCESS ADVICES / Mix phase A well and phase B well, heat them with 80°C water bath until dissolve well. Add phase A into phase B, homogenize with Silverson at 4000 rpm for 4 minutes. Stir and cool down to 45°C under anchor stirrer. Add phase C one by one under anchor stirring 100 rpm. Stop stirring at 30°C.
Fine Spray
Fights against irritation induced by masks
Can also be used as make-up fixative Spray
LZ202903-2101
SENSANOV™ WR contributes to excellent sprayability, effective FIXATIVE &
ANTI-FRICTION ability.
NATURALITY PROFILE
according to ISO 16 128 norm
NOC= 98,3%
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
More informations available on seppic.com
A D.I. WaterButylene GlycolPhenoxyethanol and Ethylhexylglycerin
Up to 100%3.00%0.70%
B MONTANOX™ 20 DFMethylpropanediolTECA™
1.00%5.00%0.20%
C AQUAXYL™ 1.00%
* Our stability protocols are available at your request.
AS40182 I CLEAR HEALING TECA WATER
Transparent solution / Packaging: sheet mask
pH: 5.2 / Turbidity: 19.6 NTU (Turbidimeter 2100Q) /VISCOSITIES: 1M at RT: <50 mPa.s Brookfield LVDV1 S61V6 / STABILITY: M3 at RT, 5°C, 45°C, cycles -5°C/+40°C.
FORMULATION ADVICES / Mix phase A clearly. Weigh phase B in a beaker, heat it up to 60~70℃, dissolve to clear, and then cool down to room temperature. Add phase B & C into phase A and stir it until uniform. Filter the sample with paper filter before packing.
Transparence & repair Reconstruction
Remodeling
This crystal clear toner has skin remodeling, redensifying and anti-stretch marks functions.
ADDITIONAL INGREDIENTS: Methylpropanediol : DUB DIOL (Dubois)
TECA ™ (Asiaticoside - Madecassic Acid - Asiatic Acid )
Titrated Extract of Centella Asiatica, better known as TECA™, is a high purified composition of some of the most powerful molecules found within this plant. TECA™ works to repair damaged skin restoring skin integrity by boosting the vital proteins within the dermis and by soothing effect .
AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol)
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted, water circulation is improved in all skin layers and water loss is reduced (in vitro and in vivo tests prove this efficacy). It’s mechanism of action has been validated by cosmetogenomics. Cosmos and Natrue approved.
MONTANOX™ 20 DF (Polysorbate 20)Solubilizer.
©U
NS
PLA
SH
BW193611-2105
NATURALITY
PROFILEaccording to
ISO 16128 norm
NOC= 93.3%
SUN CARE
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
SUN CARE GB
A company
A Ethylhexyl Methoxycinnamate4-Methylbenzylidene Camphor Ethylhexyl TriazoneBis-Ethylhexyloxyphenol Methoxyphenyl TriazineEthylhexyl SalicylateDiisopropyl sebateLANOL™ 37T
7.50%3.00%3.00%
3.00%5.00%3.00%4.00%
B SEPIMAX™ ZENSIMULGEL™ INS 100
0.20%1.50%
C D.I Water Up to 100%
D Methylene Bis-Benzotriazolyl Tetramethylbutylphenol 6.00%
E Citric acid (20%)Hydroxyacetophenone1,2-Hexanediol
0.09%0.50%0.50%
High protection base
Fresh and smooth finish
AS40195 I SKINSATION SUN GEL SPF50 PA+++ (calculated )Fresh & comfortable feeling
FORMULATION ADVICES /Mix phase A and heat to 85℃ until clear. Add phase B into phase A and stir it until even. Heat phase C to 85℃. Add phase C into phase A+B, homogenize it by Silverson at 4000 rpm for 4 min. Cool down and add phase D and stir it with anchor stirrer at 300 rpm for 5 min. Add phase E to adjust pH value to 6.5 and stir it gently.
More informations available on seppic.com
A soft skin sensation thanks to the combination of our Emollient and Polymers
A pleasure texture to play safe with the sun!
ADDITIONAL INGREDIENTS: Ethylhexyl Methoxycinnamate:Uvinul® MC 80 (BASF)/ Ethylhexyl Triazone:Uvinul® T 150 (BASF)/ Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine:Tinosorb® S (BASF)/ Methylene Bis-Benzotriazolyl Tetramethylbutylphenol:Tinosorb® M (BASF) / Ethylhexyl Salicylate: Neo Heliopan® HMS (Symrise)/ Hydroxyacetophenone: Microcare HAP(Thor)/ 1,2-Hexanediol: Microcare HA (Thor) / Diisopropyl sebate: DUB DIS (Dub)
SEPIMAX ZEN™ (Polyacrylate Crosspolymer-6)
Powder polymer with a MAXIMUM resistance to electrolytes thanks to its high associative behavior. Stable from pH 2 to 8, it enables the creation of formulas with a specific skin feeling, included foaming formulas: rich, velvety and elegant. It is now possible to formulate transparent aqueous gels, cream-gels and emulsions with any kind of active ingredients and to achieve ZEN.
SIMULGEL™ INS 100 (Hydroxyethyl Acrylate/ Sodium Acryloyldimethyl Taurate Copolymer and Isohexadecane and Polysorbate 60) Pre-neutralized liquid polymeric thickener on a wide range of pH (3 to 12). It provides also excellent oil stabilizing effect. Versatile and efficient, SIMULGEL™ I-NS 100 is used to develop from sprayable, extra-liquid to very thick formulas. It creates melting textures with a fresh skin feel.
LANOL™ 37 T (Triheptanoin)
LANOL 37T is a good organic sunscreen solubilizer.
Ivory Cream gel / Packaging: pumppH: 6.5 / VISCOSITIES: 1M at RT: 29000 mPa.s Brookfield LVDV1 S63/V6 Recovery at RT (after 1M at 45°C): 30 200 mPa.s Brookfield LVDV1 S63/V6STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C.
©U
NS
PLA
SH
LZ214906 - 2201
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
A company
SKIN CARE
SKIN CARE GB
* Our stability protocols are available at your request.
AS40196 I WHEAT ESSENTIAL CERAMOSIDES OIL
Yellow Clear Liquid Oil / Packaging: DropperVISCOSITIES: 1M at RT: < 50 mPa.s Brookfield LV1-6 / Recovery at RT (after 1M at 45°C): <50 mPa.s Brookfield LV1-6.STABILITY: M1 at RT, 45°C, 4°C and cycles -5°C/+40°C.
2
4a
4b
©U
NS
PLA
SH
A CERAMOSIDES™ HPEMOGREEN™ L15Caprylic/Capric Triglyceride
0.50%50.00%15.00%
B Simmondsia Chinensis (Jojoba) Seed OilHelianthus Annuus (Sunflower) Seed Oil
10.00%
24.30%
C Tocopheryl acetate 0.20%
ADDITIONAL INGREDIENTS: Simmondsia Chinensis (Jojoba) Seed Oil - DW Jojoba Golden (Vantage) / Helianthus Annuus (Sunflower) Seed Oil - High Oleic Sunflower Oil (Yiqun) / Tocopheryl Acetate - dl-a-Tocopheryl Acetate (DSM)
CERAMOSIDES™ HP (Glycosphingolipids & Glycolipids) The essence of perfect skin. CERAMOSIDES™ HP are an original combination (patented) of natural CERAMIDES and OMEGAs which protect the skin from the loss of elasticity, one of the primary causes of enlarged pores with age. After 28 days of application, the complexion is fresher, the pores are visibly smaller.
EMOGREEN™ L15 (C15-19 Alkane (Plant-based & Renewable )) EMOGREEN™ L15 is a non polar and biodegradable, plant-based emollient. It’s THE alternative to volatile silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. Beyond the lightweight and non-greasy skin feel, it gives a powdery finish. Inert and stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…)
FORMULATION PROCESS ADVICES / Mix phase A well, heat it with 65~70°C water bath and stir it till CERAMOSIDES™ HP dissolves well. Add ingredients of phase B and C in phase A separately and stir the system under cross paddle stirring 150 rpm for 10 min or till uniform.
Fresh complexion and visibly beautiful skin thanks to the CERAMOSIDES™ HP.
Firmness protection
Antioxidant efficacy
Hydration & Glow
GS214902 - 2201
NATURALITY PROFILE
according to ISO 16 128 norm
NOC= 99,8%
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
INULA HCProtective oil for dry hair & scalp
INULA HC replenishes the hair lipidic barrier
INULA HC provides antioxidant action
INULA HC promotes cell metabolism
1% INULA HC Placebo
After only 1 single rinse-off application
Enhances color uptakeEnhances shine
Provides a soft touch
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
Connect with us
Thank you!
CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022
NotaThe analytical specifications warranted are only those mentioned on the certificate of analysis supplied with each delivery of the product.Except as set forth above, Seppic* makes no warranties, whether express, implied or statutory, as to the product which is the subject of this document. Without limiting the generality of the foregoing, Seppic* makes no warranty of merchantability of the product or of the fitness of the product for any particular purpose. Buyer assumes all risk and liability resulting from the use or sale of the product, whether singly or in combination with other goods. The information set forth herein is furnished free of charge and is based on technical data that Seppic* believes to be reliable. It is intended for use by persons having technical skill and at their own discretion and risk. Since conditions of use are outside Seppic*'s control, Seppic* makes no warranties, express or implied, and assumes no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
* Seppic being:
Seppic S.A. - Paris Paris La Défense50 boulevard NationalCS 9002092257 La Garenne Colombes CedexFRANCETél : +33 (0)1 42 91 40 [email protected]
Seppic S.A. - Villers-sur-Fère3, rue de Préaux02130 Villers-sur-FèreFRANCETél : +33 (0)1 42 91 40 [email protected]
COLOMBIA - Seppic Colombia SASCalle 71 n°10-40Edificio Orbe 71 of 401Bogota COLOMBIATél : +571 702 44 [email protected]
RUSSIA - Seppic OfficeKosmodamianskaya nab.,52, bld. 2 115035Moscow,RUSSIATel. +7 495 641 28 98 ext. 1375
JAPAN - Seppic OfficeAir Liquide Japan's OfficeGranpark Tower 3-4-1 ShibauraMinato-ku, Tokyo 108-8509JAPANTél : +81 3 6414 [email protected]
Seppic S.A. - Castres 127, chemin de la poudrerie – BP 9012881105 Castres CedexFRANCETél : +33 (0)5 63 72 69 69Fax : +33 (0)5 63 72 69 70
UNITED STATES - Seppic Inc.30, Two Bridges Road, suite 210FairfieldNew Jersey 07004-1530UNITED STATESTél : +1 973 882 [email protected]
GERMANY- Seppic GmbHMartinstrasse 16-2050667 KölnGERMANYTél : +49 (0)221 888824 [email protected]
CHINA - Seppic Shanghai Chemical Specialities Co. 819 West Nanjing Rd, Room 1508 Zhongchuang Building,Shanghai 200041CHINATél : +86 (21) 64 66 01 49 [email protected]
KOREA - Seppic Office12FL, V-Plex,501, Teheran-roGangnam-gu,Seoul, KOREA 06168Tél : [email protected]
Seppic S.A. - PontrieuxZone IndustrielleB.P. 7222260 PontrieuxFRANCETél : +33 (0)2 96 95 31 32 [email protected]
UNITED STATES - Polykon Manufacturing LLC6201 Engineered Wood WaySandstonHenrico County VA 23150UNITED STATESTél : [email protected]
ITALY - Seppic Italia Srl Via Quarenghi 2720151 Milano ITALYTél : +39 02 [email protected]
INDIA - Seppic Speciality Ingredients Pvt Ltd O2 Commercial Twin TowerB/1304, Asha Nagar Road Mulund (W) Mumbai 400080INDIATél : + 91 22 [email protected]
Seppic S.A. - Lons1 avenue Normandie Niemen 64140 LONSFRANCETél : + 33 (0)5 59 13 04 [email protected]
BRASIL- Seppic Brasil EQCI Ltda Alameda Santos 745/ cj 72/ 7ºfloorCerqueira Cesar01419-001São Paulo – SPBRASILTél : +55 11 3252 [email protected]
POLAND - Seppic OfficeSchülke Polska Sp. z o.o.Al. Jerozolimskie 13202-305 VarsoviePOLANDTel. +48 22 11 60 759 [email protected]
SINGAPORE - Seppic OfficeNo. 2 Venture Drive#22-28 Vision ExchangeSingapore 608526SINGAPORETél : +65 6378 [email protected]
49
Contacts
© 2022 SeppicSeppic is a subsidiary of the AIR LIQUIDE group