One-Stop Shop - I.S.T. Innovative Sewer Technologies GmbH

Product catalogue 2022

One-Stop Shop

RoboticsUV technology Elastotec Power SprayLiners & more Equipment

I.S.T. Product catalogue | About I.S.T. | Page 3

Quality "Made in Germany"

All is possible with us!

Headquartered in Bochum, the heart of the Ruhr area, I.S.T. Innovative Sewer Technologies GmbH is a key leading provider of complete solutions for pipe and sewer rehabilitation. This now rapidly growing company was founded in the spring of 1998 by its managing director Jörg Vogt.

Who stops wanting to be better,stops being good."" Marie von Ebner-Eschenbach

Our experienced and highly qualified I.S.T. team supports our customers in numerous ways.

• Extensive product training, as well as on-site support for our customers at construction sites

• Over 2,000 m² of warehouse capacity for the most important consumables

• Repairs and services are performed in close proximity to the customer in our workshop in Bochum or by our subsidiaries or dealers on site

• Workshop replacement or rental equipment is available

The now globally active company manufactures and distributes a wide range of successful sewer rehabilitation products, which are developed by the I.S.T. design team according to customer needs.

Our primary objective is to serve our existing customers to their utmost satisfaction at all times and to convince new customers of our product quality and service.

This also encompasses our worldwide reach through our subsidiaries and partner companies, in order to be able to offer our international customers the very best possible advice and competent service on site, without delay.

Designed by Layerace / Freepik

I.S.T. Product catalogue| Liners & more | Page 5

Subject to technical changes.

Product name Bendability Temperature resistance Curing Nominal widthsMediumtube PVC purple up to 90° up to approx. 50 °C Cold + hot water DN 50 – DN 200

Thermotube PVC orange/blue up to 90° depending on Ø up to approx. 80 °C Cold + hot water + steam DN 100 – DN 300

Heavytube PVC conditionally suitable up to approx. 80 °C Cold + hot water + steam DN 150 – DN 500

Mediumtube UV translucent up to 90° depending on Ø up to approx. 80 °C Cold + hot water + steam + UV/LED DN 100 – DN 300

AIRBAGLINER® up to 90°** up to approx. 150 °C* Hot water + steam DN 50 – DN 400

Product name DIBt approval Curing Pot life (20 °C) Curing times

Easy POX 3008 yes Cold (alternatively warm) approx. 30 minutes 15 °C: approx. 8 h / 50 °C: approx. 1.5 h / 60 °C: approx. 1.3 h

Easy POX 6024 yes Cold (alternatively warm) approx. 60 minutes 15 °C: approx. 24 h / 60 °C: approx. 2.5 h

Easy POX T0530 yes Warm approx. 5 hours 15 °C: approx. 3 days / 60 °C: approx. 5 h

Liners & more

"Easy LINER" pipe liner systemBenefits of I.S.T. Liners & more

+ Hose liner and short liner systems with DIBt approval

+ Wide range of choice + Reproducible premium quality due to in-house production

WITH DIBT APPROVAL

NO. Z-42.3-414

The installation The result

Calibration hoses

2C epoxy resins for pipe liners Resins with exclusive resin formulations Sevenhardenertypeswithdifferentreactiontimes Cold and hot curing Solvent-free,unfilledandpigmented Shrink-free

Pipe liners

Resins

For the rehabilitation of damaged pipelines.

Pipe liners for the rehabilitation of damaged pipes For the rehabilitation of non-accessible pipes Available in various diameters, wall thicknesses, laminations and seam designs Partially bendable up to 87°, depending on liner type one to max. two dimension jumps possible Available in roll lengths of 50 m and 100 m

Source:Fun

keKun

ststoff

eGmbH

Our product range features high-quality consumables such as resins, pipe liners and fibreglass mats with innovative in-house developments and numerous unique selling points.

Product name DIBt approval Use Bend-

abilityCuring (without calibration hose)

Dimension change

Nominal widths

ThermoLiner Plus yes Earth line Cold + hot water + steam max. 1 jump DN 70 – DN 300

ThermoLiner Stretch yes Earth line/down pipe Cold + hot water + steam + UV/LED max. 2 jumps DN 70 – DN 225

ThermoLiner Stretch SL applied for Earth line/down pipe Cold + hot water + steam + UV/LED max. 2 jumps DN 70 – DN 150

BendiLiner no Down pipe Cold + hot water + steam + UV/LED max. 1 jump DN 50 – DN 150

Calibration hoses For nominal diameters from DN 50 to DN 300 Differentmaterialthicknessesandbendability

Partially temperature resistant up to 150 °C Available in roll lengths of 50 m and 100 m

* max. recommendation 100 °C to protect host pipe material** Provided that the relevant installation regulations are complied with (see manual)

I.S.T. Product catalogue| Liners & more | Page 7


TOP HAT material Dimensions: DN 100 – DN 600 (main sewer) DN 100, DN 125, DN 150 and DN 200 (side inlet)

Hat materials: Polyester needle felt with / without coating, ECR glass fabric mat / polyester needle felt construction, in each case in 45°, 70° and 90° angles

Reaction resins for impregnation: Silicate resin Easy PUR/Easy PUR Plus (2K/3K) or epoxy resin Easy POX 1504

Positioning: Manually via air push rods (up to DN 200) or preferably by means of robots such as the Power CUTTER 200

Suitable installation equipment can be found on page 22.

The result

Lateral rehabilitation with the TOP HAT System

In-house branch rehabilitation

Short liner system

"Spot Repair System" and "Spot Repair System Plus” WITH DIBT APPROVAL

NO. Z-42.3-388 / NO. Z-42.3-533

Glass mats

For the repair of spot damage in non-passable nominal diameters. The perfect complement to the Easy LINER System for permanently tight side inlets!!

"In-house branch rehabilitation" is a quick, cost-effective and reliable rehabilitation technique used in connection with damage in the branch area. It makes it possible to rehabilitate the entire fitting in one operation.

Bubble skins are easily exchangeable for desired dimensions and branch degrees (45°, 67°, 87°)

1 or 2 basic bodies only required Partial/complete rehabilitation of branches Clear handling Flexible application possibilities Nominal widths: 100/100/90°, 100/100/45°, 100/50/90°, 125/100/45°, other nominal widths on request

The installation

Easy PUR / Easy PUR Plus Two- or three-component silicate resin system Specially developed for short liner installation on damp pipe surfaces Very good impregnation behaviour Outstanding adhesion to the old pipe Excellentresistancetodifferentmedia

ResinsProduct name Angu-

lationMaterial thickness

Brim width

End wall thick-ness

Shaft length Nominal widths

Needle felt 90° 5 mm 100 mm approx. 3.5 mm 300 mm DN 100 / DN 125 / DN 150 / DN 200



Needle felt / glass 90° 5 mm 100 mm approx. 3.5 mm 300 mm DN 100 / DN 125 / DN 150 / DN 200 / DN 250 / DN 300

Needle felt / glass 70° 5 mm 100 mm approx. 3.5 mm 300 mm DN 100 / DN 125 / DN 150 / DN 200

Needle felt / glass 45° 5 mm 100 mm approx. 3.5 mm 300 mm DN 100 / DN 125 / DN 150 / DN 200 / DN 250 / DN 300

Source:FunkeKunststoffeGmbH Source:FunkeKunststoffeGmbH Source: Aqualine Dortmund

Product name DIBt approval Area weight Roll widths – in some cases exactly suitable for the respective nominal widths!

ECR glass fabric mats yes 1,086 g/m² 1.90 m / 1.28 m / 0.66 m / 0.55 m

ECR glass fabric mats yes 1,368 g/m² 1.90 m / 1.28 m / 0.66 m / 0.55 m / 0.43 m / 0.35 m

ECR glass fabric mats Corrosion-resistant, bidirectional glass complexes made of ECR glass Differentweightsperunitareaandrollwidths Excellent impregnability with Easy PUR / Easy PUR Plus resins

Initial situationPacker / Bubble Rehabilitation

Source: HD rehabilitation technology

Damage

Source: HD rehabilitation technology

TOP HAT material

The resultThe installation

Product name Pot life Application times Curing times

Easy PUR 3K (MV 100:200:3) 15 °C: approx. 10 minutes 15 °C: approx. 20 minutes 15 °C: approx. 60 minutes

Easy PUR 2K Slow 15 °C: approx. 30 minutes 15 °C: approx. 40 minutes 15 °C: approx. 150 minutes

Easy PUR 2K Summer 25 °C: approx. 12 minutes 25 °C: approx. 20 minutes 25 °C: approx. 60 minutes

Easy PUR 2K Winter 15 °C: approx. 10 minutes 15 °C: approx. 20 minutes 15 °C: approx. 60 minutes

Easy PUR 2K Fast 15 °C: approx. 6 minutes 15 °C: approx. 10 minutes 15 °C: approx. 40 minutes

Easy PUR Plus 3K (MV 100:200:3) 15 °C: approx. 11 minutes 15 °C: approx. 15 minutes 15 °C: approx. 55 minutes

Easy PUR Plus 2K Slow 25 °C: approx. 18 minutes 25 °C: approx. 26 minutes 25 °C: approx. 90 minutes

Easy PUR Plus 2K Summer 25 °C: approx. 15 minutes 25 °C: approx. 24 minutes 25 °C: approx. 60 minutes

Easy PUR Plus 2K Winter 15 °C: approx. 16 minutes 15 °C: approx. 27 minutes 15 °C: approx. 60 minutes

Easy PUR Plus 2K Fast 15 °C: approx. 11 minutes 15 °C: approx. 15 minutes 15 °C: approx. 55 Minuten

I.S.T. Product catalogue | Equipment | Page 9


Equipment

The I.S.T. Power installation equipment is tried and tested, robust and uncomplicated to use. In addition, it is characterised by a user-friendly design, high-quality components and cost-effectiveness.

Benefits of I.S.T. equipment + Technically sophisticated equipment

+ Exclusive use of high-quality materials

+ Practical, user-friendly design

+ Inversion drums in high-quality lightweight construction

Vacuum pumpsFor optimal impregnation of a polyester lines with the resins of the Easy POX range, the use of a suitable vacuum pump is essential.

Inversion drumsInversion drums in high-quality and practical design in lightweight con-struction. Now also available with air-lock attachment for endless inversion.

Hot water systemsPowerful hot water systems for fast and controlled liner curing.

Impregnation systemsImpregnationsystemsindifferentsizesand designs with proven, robust tech-nology made of stainless steel.

Tested in practice and jobsite prove Can also be used for cold-curing resin systems For nominal diameters up to max. DN 300SignificantreductionofcuringtimeDigitalflowandreturntemperaturedisplay

Steam systemsOptimum performance in combination with softening system.

2typesfordifferentlinerlengthsanddiam-eters

Avoidance of undesired air pockets Improvement of impregnationCustomdesignspecificallyfortheneedsofsewer rehabilitation

For pipe liners from DN 50 – DN 1000 Hydraulic brakes / motorised drive available on request

Convenient and safe use Suitable for hot water and steam curing

For pipe liners DN 50 – DN 1000 Optimum, uniform resin distribution/ impreg-nation in the liner

Convenient and easy to use

Power STEAM 150 For liners up to 50 m long at max. DN 200 Steam capacity 150 kg steam/hour Optimisation of curing time

Power STEAM Mini For liners 10 m up to 15 m long at max. DN 100

230 volt connection Power 3.6 KW, 5 kg steam/hour Steam temperatures up to 60 °C

LIGHTWEIGHT

CONSTRUCTION

I.S.T. Product catalogue | UV technology | Page 11


UV technology

I.S.T. offers highly innovative and reliable UV technology for curing light-reactive GRP liners of all common sewer pipe sizes.

Benefits of I.S.T. UV technology

+ 30 years of experience in UV technology

+ I.S.T. development team originally invented UV technology

+ In-house control and documentation software with video embedding

+ Curing data with video link + Remote maintenance via WIFI

+ Booster technology for subsequent performance boosting

+ Various light sources (cores, chains)

+ Mobile or truck installation

* Booster required

Our systemsPowerLIGHT – Compact 9000

nUVision – Patented technology

PowerLIGHT – Compact Plus XT 9000

PowerLIGHT – Pro 18000

Compact

Compact 9000

Compact Plus XT

The all-rounder for (almost) all range of dia.

The revolution with completely new ignition technology and a maximum cable length up to 1000 m without overheating problem.

The all-rounder for (almost) all widths with more cable length.

The power package for maximum diameters and cable lengths. Pro

Pro 12000

Range of diameterDN 150 – DN 1500 (max.)

Performance9 x 400 / 650 W9 x 1000 W

Cable lengthMax. 300 m

Range of diameterDN 150 – DN 1500

Performance18 x 650 W 12 x 1000 W

Cable length500 m – max. 1000 m



Cable length300 m (longer cable possible on request)


Performance9 x 400 W9 x 650 W*9 x 1000 W*


Range of diameterDN 150 – DN 1500

Performance12 x 650 W 9 x 1000 W


12 x 1000 W*9 x 2000 W*



PowerLIGHT – Compact 9000 and Compact Plus XT 9000

The all-rounder for (almost) all nominal widths.

PowerLIGHT – Pro 18000

The power package for maximum nominal diameters and cable lengths.

Booster medium9 x 650 / 1000 W

Backeye cameraWith illumination

Light source double coreCore 2 x 6 x 1000 W(DN 1000 – DN 1800)

Light source triple coreCore 3 x 3 x 2000 W (DN 1200 – DN 1500)Noegg-shapedprofiles

Your individual configuration

Performance9 x 400 W


BASIC EQUIPMENT


Cable length300 m

BASIC EQUIPMENT

Light source chain9 x 400 / 650 W(DN 150 – DN 600)

Backeye cameraWith illumination

Front camera Horizontalself-aligning

Light source chain9 x 400 / 650 W(DN 150 – DN 600)

Light source chain3 x 3 x 1000 W (DN 650 – DN 1500)

Light source double core2 x 4 x 1000 W (DN 650 – DN 1200)

Light source double core2 x 4 x 1000 W (DN 650 – DN 1200)

Light source chain3 x 3 x 1000 W (DN 650 – DN 1500)

Front cameraHorizontalself-aligning

Only possible with Pro

Light source available for DN 100

Pipe diameterDN 150 - DN 600

Pipe diameterup to DN 1800

Pipe diameterup to DN 1500

(x4)

Booster Maxi Pro 12 / 1812 x 1000 W (400 V) 9 x 2000 W (230 V)

More boosters on request



Now available

as a mobile GRP

Mainline curing

„Ready-to-work“ set

DN 150 – DN 400

Benefits of I.S.T. STARLIGHT

+ Pipes, Laterals and sewers from DN 70 to DN 400 (GRP and Felt lining)

+ Curing only commences with UV light exposure

+ Normal power supply + Extremly compact and mobile + Van / Transportersetup (3,5–5 T)

+ UV Patchlining option DN 150 – DN 600

+ Lateral UV / Feltlining option DN 70 – DN 225

+ In-house control and documentation software

*Dependentonconfiguration

Benefits of I.S.T. VIOLIGHT + Pipes und sewers from DN 70 to DN 300

+ LED curing system for GRP and Felt lining

+ 5 x 110W LED lamps withquartzglass

+ 70 m Push Rod + Curing speed 45 m/h (DN 100)

+ Bendable 90° from DN 70 + Easy transport due to compact design

NEWSYSTEM

* VIOLIGHT is not available in all countries.

LED curing system for laterals

UV curing system for small main sewers

LED-curing the easy way. One system for LED light curing with only one head for laterals and small main sewers.

The STARLIGHT system – the most versatile, mobile and cost-efficient UV curing system on the market. Your new companion for small main sewers with critical access points.

VIOLIGHTField of application: DN 70 – DN 300

Power: 550 WCable lengths: 70 mDimensions: 900mmx550mmx1590mm(L x W x H)

Weight: 87 kg

Power supply: 110–240V|50–60Hz|4,4A

Power supply int.: 110–240V|50–60Hz|4,4AAvailable lightsources: 5 x 110 W

STARLIGHTField of application: DN 70 – DN 400

Power: 175 W up to max. 1600 WCable lengths: 60 m and 90 mDimensions: 800 mm x 610 mm x 1260 mm (L x W x H)

Weight: 90 kg – 150 kg*

Power supply: 230V|60/50Hz|16A

Power supply int.: 110/240V|60/50Hz|30A/16AAvailable lightsources: 2 x 175 W, 1 x 300 W, 2 x 300 W, 4 x 400 W The mobile system in the van / transporter LEDheadcomparedinsize



UV pipe liner

Bonding to the old pipe possible

Consumables for light curing with STARLIGHT / VIOLIGHT

Product name DIBt approval Use Material Bendability Curing Dimension

changeNominal widths

STARLIGHT Plus applied for Earth line Needle felt UV-Hg / UV-LED 1 jump DN 70 – DN 300ThermoLiner Stretch STARLIGHT applied for Earthline /

down pipe Nonwoven UV-Hg / UV-LED max. 2 jumps DN 70 – DN 225

BendiLiner STARLIGHT no Earth line Knitted UV-Hg / UV-LED 1 jump DN 70 – DN 150

STARLIGHT VitroFlexx 2 no Down pipe Glass knitted UV + hot water + steam

max. 2 jumps DN 50 – DN 450

STARLIGHT VitroFlexx 3 applied for Earthline / down pipe Glass knitted UV + hot water

+ steammax. 2 jumps DN 50 – DN 450

UV resins

RayCure UV resinsReady-to-use mixed resins, excellent impregnating properties, storable, perfectly matched to STARLIGHT UV pipe liners.

RayCure UA resin(Urethane acrylate/methacrylate)

Resistant to common household waste water and chemicals

Excellent static valuesInstallationwithoutannulargap(close-fit) Bonding to the old pipe possible

RayCure VE, RayCure EP and RayCure PU Special requirements regarding budget, chemical and/or heat resistance

STARLIGHT pipe linerPolyesterfibre-basedpipeliner

STARLIGHT PlusThermoLiner Stretch for STARLIGHTBendiLiner for STARLIGHTSTARLIGHT VitroFlexx 2 STARLIGHT VitroFlexx 3

High-quality PU coating The right material for every application Dimension change possible with all types Seam optimised for UV curing

Product name DIBt approval Curing Storable (5 - 35 °C) Curing time/temp. max.

RayCure UA applied for UV Hg lamp or LED min. 6 months 3 – 5 min / 100 °C – 120 °C

RayCure VE applied for UV Hg lamp or LED min. 6 months 3 – 5 min / 120 °C – 140 °C

End caps

Deflection rollers

KAESER BB 52 C BB 89 CB 131 CElectrical connection: 400V/3Ph/50Hz 400V/3Ph/50Hz 400V/3Ph/50Hz

Nominal width: up to DN 400 up to DN 600 up to DN 1800*

Nominal motor power: 7,5 kW 15,0 kW 30,0 kW

Volumeflow: max. 2,91 m³/min 400 m³/h 666 m³/h

Weight: 207 kg 330 kg 642 kg

Pressuredifference: 950 mbar 800 mbar 1000 mbar

Remote control: yes (optional) yes (optional) yes (optional)

Compressor

Generator

Innovative closure

technology

Accessories

Deflection rods for manholes

End caps forcircularprofilecross-sectionsØ DN 150 to DN 1600

End caps for egg-shaped sectionsØ DN 400 to DN 1200

Deflection rollers for manholes

Guide rollers for manholes

Deflection rollers for liner insert

Do not forget!

PRAMAC GSW 35 GSW 50 GSW 67PContinuous output: 30,5 kVA 44,0 kVA 61,0 kVA

Voltage: 400 / 230V 400 / 230V 400 / 230V

Frequency: 50Hz 50Hz 50Hz

Fuel: Diesel Diesel Diesel

Suitable for Kaeser: BB 89 BB 89 + CB 131 C BB 89 + CB 131 C

* Dependent on retention length

I.S.T. Product catalogue | Robotics | Page 19


NOW IN FULL HD

Benefits of I.S.T. robotics + Multifunctional robot + Air and electric motor available

+ Automatic approach of sence connection

+ Quick change air motors / silencers

+ High crawler speed + Mobile or Truck / Van mounted

+ Visual representation of the robot position

Endless rotating arm

Welcome to the future

Discover I.S.T. patented software for the automatic retrieval of side feeds.

Quick-change air motors

Electric motor

PC 150 PC 200 PC 200 EOperating range: DN 150 – 300 DN 200 – 700 DN 200 – 700

Weight: 20 – 25 kg 65 – 100 kg 68 – 103 kg

Length: 750 mm 950 mm 990 mm

Dimension circle: 105 mm 140 mm 140 mm

Degrees of freedom: 3 4 4

Cameras: 1 Twin 2 2

Cutting motor drive type: Air Air Electric

Number of motors: 1 3 1

Sensor technology: Yes Yes Yes

Measurement software: No Yes Yes

Air/water supply hose: 100 m / 200 m 100 m / 200 m Water: 200 m

Cable lengths: 140 m / 220 m 140 m / 220 m 220 m

Power supply: 240V|60 / 50Hz|16A 240V|60 / 50Hz|16A 240V|60 / 50Hz|16A

Air supply: min.8bar / 3m3 min.8bar / 3m3 –

Speed of crawler: approx.24m/minwithØ 50mmwheels

approx.18m/minwithØ 100mmwheelsapprox.36m/minwithØ 190mmwheels

Rear camera with lighting

High retraction speed

Freely configurablecontrol panel with touch display

Automated sence connection finder

POWERED BY

Swivel Full HD colour zoom camera with LED illumination



Your individual configuration

Cable drum140 m / 220 m

Water / air drum manual or motorised

100 m / 200 m

Control unit for fixed installation

Mobile control in flight case

Control panel+Universal base

Twin camera

Camera Camera

Air motors

Air motor Electric motor

ECO

BASI

C

POW

ER

mandatory

mandatory

mandatory

mandatory

mandatory

mandatory

mandatory

mandatory

mandatory

Optional vehicle-mounted components

Milling | CUTTING

Repairs + Rehabilitation

CCTV inspection + cleaning

Multi-functional

Highest pressure water jetting

TV inspection

Zoom camera Zoom camera

PC 150 PC 200 PC 200 E

Special tool Chisel, grabber

Packer assortment and bladders for lateral repair DN 150 - DN 800 / disconnectable

Short linerDN 100 – DN 600

Milling alsoinegg-shapedprofiles DN 400/600 - DN 600/900

REPAIRSpot

Hybrid drum Cable / Water

motorised 140 m

mandatory



Application rangeTOPHATpacker,flexible,withoutflow DN 100 DN 150

TOPHATpacker,flexible,withflow DN 200 DN 250 DN 300 / 350

TOPHATpacker,rigid,withflow DN 300 / 400 DN 400 / 600 DN 500 / 700 DN 600 / 800

TOP HAT setting bladders DN 100 DN 150 DN 200 DN 150 long

Power TOP HAT

The TOP HAT System hatavailableindifferentdimensionsandangulations Polyester needle felt with/without coating - also in combination with ECR glass fabric mats Reactive resins Silicate resin Easy PUR/Easy PUR Plus or epoxy resin Easy POX 1504 Hat packer:

DN 150 – DN 600 (main channel) DN 100 – DN 200 (side inlet)

For certain dimensions: Multi-range packers that cover several dimensions (e.g. DN 300/ DN 350)

Use of high quality rubber and selected components

High-performance tools for the Power CUTTER 200. We offer a large selection of cutting tools for all applications such as: Stoneware, concrete, lime deposits, liners (GRP and felt), plastic, cast iron or steel.

Further cutting tools are available on request.

Lateral Locating Software

Side inlets are recorded and saved prior to rehabilitation

Relocaly after rehabilitation based on the stored data

Automated approach of the side inlets Hightimeandcostefficiency

Software patented by I.S.T. for automatic locating of service connection

EXCLUSIVE TO I.S.T.

1,5 m270° 5,2 m

340° 8,0 m290° 10,5 m

320°

The connections are found from here on alone

I.S.T. Product catalogue | Elastotec Power Spray & Partner | Page 25


Also available as fully equipped

vehicle, see page 26.

Benefits of I.S.T. Elastotec Power Spray

+ For small nominal diameters in the in-house area

+ Perfectly matched machine technology

+ Quick, damage-free rehabilitation

Pipeinspection technology

IBOS products also available from us

Tried and tested high-performance camera systems based on the very latest technology. "Made in Germany" with own development and production.

Analogue and digital sliding systems Flush-mounted camera systems Carriage camera systems Interchangeable camera heads Electric cable drums Control units Comprehensive accessories

The cost-effective alternative for clear pipe inspection.

State-of-the-art camera systems Various variants available Now also available as a satellite systemMobileorfixedinstallation Comprehensive accessories Own documentation software and WinCan compatible

RiDrive Mobile – trolley system with battery operation

DN 90 – DN 600

RiCubio® Fluid – inspection and cleaning with battery operation

Max. cable length: 120 m DN 75 – DN 300

RiCubio® M – Sliding system with battery operation

Max. cable length: 60 m DN 75 – DN 300

CamBoss 150_IV DN 150 – DN 1000 With rear cameraMobileorfixed

Revi 260 with pan and tilt camera DN 70 – DN 300 Max. cable length: 80 m Colour CCD camera

Elastotec Power Spray

Pipe coating without the use of liners, fast – clean – economical. Especially in the in-house area, in narrow conditions, for small and difficult-to-access sewage pipes and stachpipes in the nominal width range DN 32 to DN 200.

Machine technology

Material

The proven Elastotec Power Spray machine technology with extremely compact dimensions.

The machine operates fully automatically Multilingual, easy-to-use touch-screen interface Precise calculation of resin quantities / mixing ratios andflowrates

Reaction resin specially formulated for the special requirements.

Solvent-free two-component PU material Very fast reaction time of 2 – 3 minutes Final layer thickness 2 – 4 mm The coating is resistant to pressures, domestic sewage and grease

The coating is resistant to pressures, domestic sewage and grease

Suitable for all common pipe materials with excellent adhesion

No dirt, no noise, no odours

AfterBefore

WITH DIBT APPROVAL

NO. Z-42.3-565

"Picote" is required.

RITEC and IBOS is not available in

all countries. Please speak to our

sales team.

I.S.T. Product catalogue | Vehicle equipment | Page 27


Truck installation – individuality for your daily success!

We configure your individual vehicle conversion entirely according to your requirements with our technology and high-quality supply units.

Installation – UV technology

Benefits of individual truck installation

+ Vehicle or trailer of your choice

+ Consideration of customer-specific requirements and wishes

+ High-quality and field-testedequipment

Installation – Refurbishment technology

Installation – Milling technology

I.S.T. Product catalogue | Your local contact | Page 29

I.S.T. – Your local contact

SALESMANAGING DIRECTORS

HEAD OF SALES

HEAD OF FINANCE / CONTROLLING

OFFICE (ORDERS CONSUMABLES, SHIPPING, CUSTOMS)

Kerstin SchmitzTeam Manager DACH & France

+492345 79 88-61 +4916090 68 62 16 [email protected]

Jendrik BluhmSales Northern Germany

+492345 79 88-61 +491635 79 88 22 [email protected]

Lukas BethkeSales South-East Germany and Austria

+492345 79 88-61 +4915165 61 91 23 [email protected]

Jörg VogtManaging Partner

+492345 79 88-0 [email protected]

Wilfried OberkönigManaging Director, Machine Technology / UV Technology Division


Holm ReisingerHead of Sales, authorised signatory

+492345 79 88-0 +4915142 68 11 12 [email protected]

Monika SchmidtHead of Finance / Controlling


Erich MallingerOrder Handling


Ron KerkemeierOrder Handling


Sören LiebmannMarketing Manager, Art Director

+492345 79 88-14 +4915141 47 85 55 [email protected]

MARKETING

TECHNICAL MANAGEMENT

TECHNICAL CONSULTING & DEVELOPMENT

Matthias PeppelProduct Manager Consumables

+492345 79 88-0 +491713 66 20 20 [email protected]

Uwe SchallenkampProduct Manager Spray Technology

+492345 79 88-0 +491755 77 74 08 [email protected]

Chamseddine KorbiProduct Manager UV Technology

+492345 79 88-0 +4915161 32 64 92 [email protected]

Jerry RichmondService, Technical Support for Robotics & Top Hat

+4915111 72 55 02 [email protected]

Matthias LooserProduct Manager PowerCutter

+492345 79 88-0 +4916090 42 80 16 [email protected]

ACCOUNTING / CONTROLLING

APPLICATION TECHNICIANS

PRODUCTION

SERVICE, REPAIR & SPARE PARTS

Thomas HeseHead of Application Technicians

+492345 79 88-0 +491754 18 19 10 [email protected]

Volkmar CybaHead of Production


Dennis HunckeApplication Technician

+492345 79 88-0 +491705 77 77 97 [email protected]

Waldemar FothTechnical Sales South-West Germany


Philippe RitterSales France, French-speaking countries


Ludovic DelagouttièreSales France, French-speaking countries


Kathrin GierlSales Assistant

+492345 79 88-61 +491635 79 88 44 [email protected]

Flávia Oliveira SiepmannFinancial accountant


Johanna SuerkemperAccountant


Steaven HeitzenröderService coordination, Technical Support

+492345 79 88-62 +4916091 15 61 36 [email protected]

Thomas KronbergerService Manager, Technical Support

+492345 79 88-62 +491635 79 88 66 [email protected]

I.S.T. Product catalogue | Notes | Page 31

I.S.T. – worldwide

Award: Branch of the Year 2021

We congratulate the branch of the year 2021 „I.S.T. Skandinavia A/S“

Lenghts: m ft0,35 m 1.15 ft0,43 m 1.41 ft0,55 m 1.81 ft0,66 m 2.17 ft1,28 m 4.20 ft1,90 m 6.23 ft10 m 32 ft11 m 36 ft15 m 49 ft60 m 197 ft100 m 328 ft120 m 393 ft140 m 460 ft200 m 656 ft220 m 722 ft300 m 985 ft320 m 1148 ft1000 m 3280 ft

Weights: g / kg lb360 g 0.80 lb430 g 0.95 lb680 g 1.50 lb740 g 1.63 lb1,086 g/m² 2.394 lb/m²1,368 g/m² 3.016 lb/m²5 kg 11 lb20 kg 44 lb25 kg 55 lb65 kg 143 lb68 kg 150 lb90 kg 198 lb100 kg 220 lb103 kg 227 lb150 kg 330 lb330 kg 727 lb642 kg 1415 lb

Lengths:mm inch2 mm 0.08“3,5 mm 0.14“4 mm 0.16“5 mm 0.20“8 mm 0.32“12 mm 0.47“18 mm 0.71“52 mm 2.05“72 mm 2.85“

Pressures: mbar psi800 mbar 11.6 psi1000 mbar 14.5 psi

Temperatures: °C °F15 °C 59 °F25 °C 77 °F50 °C 122 °F60 °C 140 °F80 °C 176 °F100 °C 212 °F120 °C 248 °F140 °C 284 °F

Nominal Powers: kW hp15,0 kW 20 hp30,0 kW 40 hp48,6 kW 65.2 hp

Volume flow: m³/h CFM400 m³/h 235.6 CFM666 m³/h 392.3 CFM

Nominal diameters: (DN)mm inchDN 32 1.25“DN 50 2“DN 70 2.75“DN 75 3“DN 80 3.15“DN 90 3.5“DN 100 4“DN 125 5“DN 150 6“DN 200 8“DN 225 9“DN 250 10“DN 300 12“DN 350 14“DN 400 16“DN 600 24“DN 650 26“DN 700 28“DN 800 32“DN 900 36“DN 1000 40“DN 1200 48“DN 1500 60“DN 1600 64“DN 1800 72“DN 2000 80“

Conversion table

The values are partially rounded

AWARDBranch of the Year

2021I.S.T. Skandinavia A/S

I.S.T. Innovative SewerTechnologies GmbH

Rombacher Hütte 1944795 Bochum, Germany

EOF THYEARBranch

WINNER

I.S.T. China

CERTIFICATE

OF THEYEARBranch

Branch of the Year

2020

I.S.T. Innovative Sewer Rombacher Hütte 19Technologies GmbH 44795 Bochum, Germany

Pipe Core | Australia

CERTIFICATE

OF THEYEAR

Dealer of the Year

2020

I.S.T. Innovative Sewer Rombacher Hütte 19Technologies GmbH 44795 Bochum, Germany

OF THEYEARDealer

I.S.T. Innovative Sewer Technologies GmbHRombacher Hütte 19 | 44795 Bochum

Phone +49 234 57988-0Fax +49 234 57988-55

[email protected]

www.ist-web.com

Order centre +49 234 [email protected]

Sales+49 234 [email protected]

Service+49 234 [email protected]

You have questions, We have the answers.

I.S.T. Iberica de Innovaciones, S.L.U.C/.Manzanos12-A28700 San Sebastian de los Reyes (Madrid)Phone +34 91 6520100Fax +34 91 [email protected] I.S.T. Skandinavia A/SErhvervsparken 114621 GadstrupPhone +45 46 404488Fax +45 46 [email protected]

I.S.T. Canada Inc.1342 Sandhill DrAncaster, ON CanadaL9G4V5Phone +1 [email protected]

I.S.T. North America LLC377 Western HighwayNY 10983 TappanPhone +1 212 [email protected]

I.S.T. (Beijing) Technology Co., LtdRm707, Building 6 POLY METROPOLITAN; No. 156, Xinhua North Rd101199 BeijingPhone +86 139 1108 [email protected]

I.S.T. Latinoamerica, S.A.S.Carrera15,N°88-64,Office405,BuildingTorre Zimma110221 BogotáPhone +57 301 428 [email protected]

Your partner on-site

2022.07

One-Stop Shop - I.S.T. Innovative Sewer Technologies GmbH

Documents

Transcript of One-Stop Shop - I.S.T. Innovative Sewer Technologies GmbH