MINING PRODUCTS

MINING PRODUCTSM

ININ

G PRODUCTS

HYDRAULICS + INDUSTRIAL HOSE + POWER TRANSMISSION

99993September 2012

Supersedes September 2008 Edition

GATES CORPORATION1551 Wewatta StreetDenver, CO 80202800.366.3128 / Fax 303.744.4499Gates.com/mining

POWERING PROGRESSTM

gates.com/miningPowering Progress. 1

TABLE OF CONTENTSWarnings and Caution ....................................................................................................................................... 2

Getting the Best Service Life ............................................................................................................................ 3

Product Information ..................................................................................................................................... 4-10

Temperature Limits ......................................................................................................................................... 11

Agency Specifications ............................................................................................................................... 11-13

Specialized Mining Hose ........................................................................................................................... 14-27

Specialized Mining Couplings, Adapters and Accessories .................................................................... 28-49

Standard Hydraulic Hose ........................................................................................................................... 50-87

Equipment ................................................................................................................................................. 88-106

Belt Preventive Maintenance Tools.............................................................................................................. 107

PolyChain® GT® Carbon™ Belts ............................................................................................................. 108-111

Super HC® Belts ...................................................................................................................................... 112-116

Predator® Belts ....................................................................................................................................... 117-123

Hi-Power® II Belts ................................................................................................................................... 124-134

Product Information

Specialized Mining H

oseSpecialized M

ining Couplings, Adapters and AccessoriesStandard H

ydraulic Hose

Equipment

Belts

gates.com/miningGates Corporation2

WARNINGSerious injury, death and destruction of property can result from rupture or blow-apart of a hydraulic hose assembly that is:

■ Damaged or worn out ■ Assembled or installed incorrectly

Never underestimate the power of a blown hydraulic assembly.

LIMITED WARRANTYGates Products are warranted to be free from defects in material and workmanship, and Gates will, at its option, replace or repair any Products proved defective in material or workmanship. This is the sole remedy for breach of warranty. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, HEREBY ARE EXPRESSLY DISCLAIMED. LIABILITY FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL, EXEMPLARY AND INDIRECT DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, HEREBY IS EXPRESSLY EXCLUDED, REGARDLESS OF WHETHER SUCH DAMAGES WERE REASONABLY FORESEEABLE, OR WHETHER GATES HAD KNOWLEDGE THAT THEY COULD OCCUR. This Limited Warranty shall be void to the extent that any of the following, as determined by Gates, occurs: (a) improper installation of the Products, including any unau¬thorized installation of Products into vehicles; (b) improper usage or maintenance of the Products; (c) induction of defect by other products; (d) mishandling of the Products or other abuse; (e) improper matching with other applications; (f) collision, engine overheating or oil starvation, or product misapplication or contamina¬tion, including, but not limited to, contamination with oil or antifreeze; (g) the Products are used for racing or competition; (h) any use not recommended in writing by Gates; or (i) any failure to follow use instructions.

Avoid injury to yourself and others by following these important hose assembly steps:

OTHER SAFETY INFORMATIONMany factors affect the selection, making, instal-lation and maintenance of hose assemblies. This cata-log, Gates Corporation, the hydraulic equipment maker and the Society of Automotive Engineers Recommended Practice SAE J1273, have useful information about selecting, making, installing and servicing hydraulic hose

assemblies. For further infor-mation, please contact your local Gates representative or call Gates Corporation.

Gates recommends hose and coupling combinations in this catalog only after completing extensive testing.

Evaluation of a hose and cou-pling combination requires considerable impulse testing

and cannot be determined by a simple burst or pressure hold test. Gates disclaims all liability for any hose assembly made in violation of Gates recommendations, proce-dures and current crimp data. Crimp data is updated on average every year. For the most up-to-date crimp data, visit our website at www.gates.com/ecrimp.

The consumer's exclu-sive remedy with respect to any claim shall be a refund of the purchase price or replacement of the product at the option of Gates. In no event shall Gates be liable for any incidental or consequential damages whatsoever.

1. Receive hands-on training with Gates recommended equipment.

2. Follow current Gates operating man-uals and crimp data.

3. Use only new (unused) Gates recommended hose and couplings with Gates crimpers.

4. Wear safety glasses.

Select and Install Assemblies With Care1. Select proper hose assemblies

for the application. Many factors and conditions affecting the inside and outside diameter of the hose must be taken into account.

2. Hose assembly routing must not create an injury hazard or damage hose. Refer to the standards, regulations and directories that apply in the countries where the equipment is sold and used.

3. Select hydraulic components so that the application's temperature,

pressure and bend radius do not exceed recommended component limits.

4. Hose must not be stretched, kinked, crushed or twisted during installation or use. Hose must not be bent to less than the minimum bend radius.

5. Use only thermoplastic hose for non-conductive applications. For instance: cherry pickers. All other Gates hoses are electrically conductive.

6. DO NOT use hydraulic hose to transmit high pressure gases or steam.

Follow Good Maintenance Practices1. Establish a program of inspec-

tion, testing and replacement of hose assemblies from factors including:■ Severity of application.■ Frequency of equipment use.■ Past performance of hose

assemblies.

2. Only properly trained persons should inspect, test or service hose assem-blies. Update training periodically.

3. Document maintenance, inspections and testing.

4. AVOID FLUID INJECTION INJURIES■ Fluid under pressure

can cause serious injury. It can be almost invisible escaping from a pinhole, and it can pierce the skin into the body.

■ Do not touch a pressurized hydrau-lic hose assembly with any part of your body.

■ If fluid punctures the skin, even if no pain is felt, a serious emer-gency exists. Obtain medical assistance immediately. Failure to do so can result in loss of the injured body part or death.

5. Stay out of hazardous areas while testing hose assemblies under pres-sure. Use proper safety protection.

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


GETTING THE BEST SERVICE LIFE

Hose Shelf Life

Storage environment, along with rubber materials can vary the shelf life limit. Shelf life is difficult to quantify as many variables affect the hose. Proper stor-age precautions can result in three to five years shelf life. Beyond this time there can be significant service life decrease, depending on storage environment variables. Some variables are:

• Temperature — Hose should be stored in a cool, dry area never exceeding +100°F (+38°C). If stored below freezing, pre-warming may be required prior to handling, testing and placing into service.

• Direct sunlight, rain, heaters or being near electrical equipment

• Humidity and ozone

• Oil, solvents, corrosive materials or fumes

• Insects or rodents

• Radioactivity

• Space allowance and bends

Store hose in original container. Never stack hose too high, as its weight can crush hose at the bottom of the stack.

Gates recommends hose in extended storage be visually inspected and tested prior to use. Hose judged marginal should be replaced to avoid potential failure, property damage or bodily injury. Store hose on a first-in/first-out basis. Unusually long storage, or poor storage environment can deteriorate hose, reduce performance and may lead to premature failure.

How long will a hydraulic hose assembly last? It depends on how it's used. This catalog and other Gates literature show the recommended limits for our assem-blies (and also the hoses and couplings used to make assemblies). These limits include installation, maintenance and conditions of use. These limits MUST be followed or the assembly can fail resulting in personal injury or property damage. If you do not have this impor-tant information, you can get it at no cost from your local Gates distributor or Gates field representative.

Hose assemblies in use should be inspected regularly for leaks, kinks, cover blisters, gouges, abrasion and other damage. Damaged or worn assemblies must be replaced immedi-ately. You can increase assembly life if you do the following:

Hose Assembly Installation – Hydraulic hose assembly installations should comply with hydraulic hose routing and plumbing standards per SAE J1273 for the proper application of hose assemblies.

Working Pressure – The hydraulic system pressure should not exceed the rated working pressure of the hose. Pressure surges or peaks exceeding the rated working pressure are destructive and must be taken into account when selecting a hose.

Minimum Burst Pressure – Burst pressures are pressures referred to in this catalog which were intended for destructive testing purposes and for design safety factors only.

Temperature Range – Do not expose hose to internal or external temperatures exceeding the recommended limits. Consult additional technical data when hydraulic fluids contain emulsions or solutions. The fluid manufacturer's recommended maximum operating temperature for any given fluid must not be exceeded, regardless of hose temperature range.

Fluid Compatibility – The hydraulic assembly (tube, cover, reinforcement and couplings) must be fluid compatible. The correct hose must be used because phosphate ester and petroleum-based hydraulic fluids have drastically different chemical characteristics. Many hoses are compatible with one or the other, but not all fluids. For example, Gates G2XH, MegaTech® and C5D hoses are capable of handling phosphate ester and petroleum-based hydraulic fluids.

Minimum Bend Radius – Do not bend or flex hose to a radius smaller than the minimum recommended and do not subject hose to tension or torque. This can place excessive stress on the reinforcement and severely reduce the ability of the hose to withstand pressure.

Hose Size – Hose size (inside diameter) must be capable of handling the required flow volume. Too small an l.D. for a given volume of flow results in excessive fluid pressure and heat generation which can result in tube damage.

Hose Routing – Restrain, protect or guide hose, with clamps if necessary, to minimize the risk of damage due to excessive flexing, whipping or contact-ing other moving parts or corrosives. Determine hose lengths and configura-tions that protect from abrasion, snagging or kinking and provide leak-resistant connections.

Hose Length – Correct hose length should include considerations for length changes under pressure, machine vibration and motion, and hose assembly routing.

Hose Applications – Select the proper hose for the application. Suction appli-cations (Gates GMV or G4H) and special fluid or high temperature capabilities are among the applications requiring par-ticular consideration and a specific hose. When additional information is required, contact your local Gates representative.

NOTE: Do not use Gates hydraulic hose in place of permanent piping.

FROM GATES HYDRAULIC HOSE + ASSEMBLIES

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


• Simplifies hose selection with constant pressure ratings

• Bends up to one-third SAE bend radius specifications

• Saves overall hose assembly length

• Facilitates easier routing in tight applications

• Requires fewer bent tube fittings

• Eases installation with higher flexibility

• Lowers inventory requirements

• Extends life in bending, flexing applications

• Available with abrasion-resistant XtraTuff™ or MegaTuff® covers

• Reduces costs by as much as 64 percent

Constant Pressure HosesThe MegaSys® line consists of constant pressure spiral-wire and wire-braid hoses that can be bent up to one-third SAE specifications. Combined with innovative couplings specifically designed to crimp on these hoses, leak-free performance is guaranteed up to maximum working pressures as high as 8,000 psi.

MegaSys Benefits

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


MegaSys® Spiral-Wire Constant Pressure Hoses

EFG3K, EFG4K, EFG5K, EFG6K and G8K Hoses

• Each hose features a constant working pressure

• Four alternating layers (six in some larger sizes) of spiraled, high tensile steel

• Nitrile tube for use with biodegradable hydraulic fluids

• Tested to industry-leading 1,000,000 impulse cycles

• Temperature range -40°F to +250°F (-40°C to +121°C)

• Available with abrasion-resistant MegaTuff® cover

MegaSys® Wire-Braid Constant Pressure Hoses

M3K, M4K, M5K and M6K Hoses

• Each hose features a constant working pressure

• Two braids of high-tensile steel wire (one braid in M3K -3, -4, -5, -6 and -8 sizes)

• Nitrile tube for use with biodegradable hydraulic fluids

• Tested to industry-leading 600,000 cycles

• Temperature range -40°F to +212°F (-40°C to +100°C)

• Available with abrasion-resistant XtraTuff™ or MegaTuff® covers

3000 psi

4000 psi

5000 psi

6000 psi

8000 psi

MegaSys Hose Pressure Color Key

The MegaSys® Hose Line

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


LifeGuard™ Line-of-Sight Sleeving System There's a Better Way to Protect Equipment Operators Against Hydraulic Hose Failure.

A burst or pinhole leak in a hydraulic system can cause serious problems – especially for anything or anyone located within a three-foot line-of-sight. Personal injury. Fluid burns and injection. Fires and explosions. Electrical shock. Mechanical failure.

Now, Gates has engineered the first effective, economical alternative to costly metal shielding or rerouting of hose lines. The LifeGuard sleeving system is designed to protect operators, equipment and the environment from the hazards of catastrophic hydraulic hose failure – a level of protection previously unavailable.

How the System Works

The LifeGuard sleeve is slipped onto the hose and clamped at each end. If a hose burst or pinhole leak occurs, escaping pressures and fluids are contained by the exceptionally strong sleeving material. Fluids then exit the system via openings created by the specially designed channel clamps at each end. A noticeable pool of leaking fluid serves as positive verification that a failure has occurred so corrective action can be taken immediately to replace the hose assembly. LifeGuard sleeving correlates to a variety of industry standards, including ISO 3457 and MSHA's flame-resistance requirements.

• Provides containment of up to 10,000 psi (68.9 MPa) bursts

• Protects against 5,000 psi (34.5 MPa) pinhole leaks at +212°F (+100°C) for up to five minutes

• Handles hydraulic fluids and biodiesel fuel

• Allows fluid to safely escape down the length of the assembly

• Creates noticeable spill for hose failure detection

• Correlates to ISO 3457 and meets MSHA's flame-resistance requirements

• No other sleeve provides this level of protection

• Patent pending system includes Gates hose, couplings, sleeve and channel clamps

The LifeGuard sleeve contained and effectively redirected fluid during 10,000 psi (68.9 MPa) burst tests while hoses without sleeving exploded, releasing a large amount of fluid in the immediate area.

LIFEGUARD SLEEVE LIFEGUARD SLEEVEHOSE ONLY HOSE ONLY

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Solid, Leak-Free MegaCrimp® Couplings

The majority of hydraulic hose failures occur at the couplings due to blow-offs or leaks. Gates has designed and engineered innovative, robust couplings for MegaSys hoses that provide connections you can count on for superior performance – guaranteed.

The Versatile "No-Weep" Coupling with the Patented "C" Insert

It's what's inside the pre-assembled MegaCrimp coupling that gives it world-class, leak-proof performance. It is designed with a patented "C" insert, attached to the ferrule, that accommodates hoses of different constructions and wall thicknesses. The insert's design ensures crimping forces are evenly distributed to form a concentric seal.

The "C" insert simplifies inventory requirements since one MegaCrimp coupling size can accommodate various hose outside diameters, on both one- and two-wire braid hydraulic hoses.

Key Features

• Robust "bite-the-wire" crimp

• Low profile

• Full-stem insertion

• Full-length crimp

• Tested to industry-leading 600,000 impulse cycles

• Simplifies inventory management

• Environmentally-friendly TuffCoat™ plating for 500 percent better corrosion resistance

During crimping, only the MegaCrimp coupling's outside shell takes on the shape of the dies. The "C" insert starts round, stays round – like the hose.

Once inserted, MegaCrimp couplings stay put. They don't fall out.

MegaCrimp couplings have an optimum insertion force — not too

tight, not too loose — so you can feel them "hit bottom" when inserted.

The no-skive coupling… one stem is all you need

Robust swivel joint allows for maximum torque

Strong Full-Torque Nut™ design—up to 24,000 psi burst pressure (-20 size EFG6K) with improved torque resistance

Features BenefitsNo skive Fast, tailor-made assemblies.

Eliminates skiving equipment, odor and dust.

Tested to 1,000,000 impulse cycles Extended coupling life.

Coupling to 6,000 psi working pressure in all sizes*

Easy-to-manage inventory.Fewer SKUs.

Over 75-plus thread/flange configurations Application coverage.

TuffCoat® plating More than five times better corrosion resistance than SAE ASTMB117 specification.

"Bite-the-wire" crimp Improved coupling retention.

Premium steel Maximum strength.

+250°F temperature capability Full performance at high temperatures.Longer coupling life.

Machined full-back FJX and FFORX nuts 4:1 burst performance up to 24,000 psi.Improved torque/sealing capability.

Meets worldwide DIN, EN, SAE, ISO and Gates EFG6K standards and requirements

World-class performance.

One stem used for all spiral hoses Less inventory. Easier to use.

Two-piece design Reduced inventory by 30% because only one stem is required for all spiral wire hose types.

*Except as noted in coupling tables

GlobalSpiral™ Couplings

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


Choose the Gates Belt that Meets Your NeedsGates offers more types of belts than ever before. This broad choice of products allows you to select the belt that provides the best performance and the best value on your mining equipment.

Predator Single Belt

Predator PowerBand Belt

• Highest power density of any V-belt on the market.• Ideal for drives requiring high-impact strength and load-

carrying power.• Minimal stretch for reduced

maintenance.• Allows momentary belt slip to

act as a mechanical fuse in the system.

• KEVLAR®* or aramid tensile cords.

• Wear-resistant double fabric cover.

• Singles belts: AP, BP, CP, 5VP & 8VP classical cross sections; SPB-P & SPC-P metric cross sections.

• PowerBand belts: CP (up to 12 strands), 3VP (up to 10 strands), 5VP (up to 16 strands), 8VP (up to 12 strands).

Predator® Belts – Best Belts Available for Crusher Equipment.

Super HC® Molded Notch V-Belt – Shaker Screens• Service up to 400 hp.• EPDM construction handles

temperatures from -60 to +250°F

• Molded notches increase flexibility for drives with smaller diameter sheaves.

• Single belts: 3VX, 5VX, 8VX cross sections.• PowerBand belts: 3VX (up to 22 strands), 5VX (up to 13

strands).

Super HC® V-Belt – Shaker Screens• Service up to 300 hp.• Single belts: 3V, 5V, 8V cross

sections.• PowerBand belts: 3V (up to 30

strands), 5V (up to 18 strands), 8V (up to 12 strands).

Hi-Power® II V-Belt – Shaker Screens• Good general purpose V-belt.• Single belts: A, B, C, D, E cross

sections.• PowerBand Belts: A (up to 20

strands), B (up to 16 strands), C (up to 12 strands), D (up to 8 strands).

Poly Chain® GT® Carbon™ Synchronous Belt – Shaker Screens and Conveyors• Clean-running, high-powered

polyurethane belt drive alternative to roller chain.

• Carbon tensile cord combines minimal stretch with extraordinary strength and load capacity, while absorbing shock loads.

• Ideal for low-speed, high-torque applications.• Virtually immune to abrasion.• 8mm pitch – 12mm to 62mm widths.• 14mm pitch – 20mm to 125mm widths.

Single or PowerBand® V-Belts?To determine whether to choose single v-belts or joined PowerBand v-belts, first identify how much rock and debris your belt guards allow into your drive systems:

None to 3/8 inch debris: Use one or more single belts.Larger than 3/8 inch debris: Use PowerBand belts

Note: PowerBand belts should not be used on deep groove sheaves because the tie band across the top will be cut or separate from the individual belt strands.

Other Gates Belts for Aggregate Equipment Drive Applications.

*Kevlar® is a registered trademark of E.I. du Pont de Nemours and Company

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Design Flex® Pro™ Software: Download software to design two-point drives in minutes, and get numerous drive solutions that fit your parameters.

Design Flex® Web™: This online program has all the functionality of Design Flex Pro.

Design IQ™ Software: Download this program to design multi-point and complex serpentine belt drives. It calculates necessary belt tension, shaft load, belt length and more.

PartView™: Locate the belts, sprockets and sheaves you need in this catalog complete with CAD models and 2D specification sheets.

Case Studies: Improved reliability. Reduced downtime. Less maintenance. Read about the benefits of Gates belt drive systems.

Gates® PT Toolkit™ mobile app: Use your iPhone® or Android® device to crunch the numbers on energy savings, center distance and belt tension. Perform power transmission calculations on the go.

Resources for Drive Design & More

Visit www.gates.com/ptsavings to access these additional tools from Gates that help you save money and time:

Product Information

Specialized Mining

Hose

Specialized Mining Couplings, Adapters and Accessories

Standard Hydraulic H

oseEquipm

entBelts


Exclusive QUICK-PIC™ and AIM™ ProgramsBuilding Better Inventory Support for Construction Equipment Owners

Gates Construction Distributors have instant access to our exclusive QUICK-PIC™ and AIM™ computer programs and extensive, up-to-date global product data online.

Whether it's a critical failure in the field or regular equipment maintenance in the shop, your Gates Construction Distributor is the one-stop source for all your hydraulic assembly replacement needs.

• Complete equipment coverage

• Accurate, quality parts replacement

• Alternative to high-priced, hard-to-get OEM parts

• Fast, just-in-time service

• Minimal equipment downtime

• Reduced inventory costs

• Gates trust, quality and reliability in every assembly

Quick Part Number Interchange

Finds the right replacement assembly in seconds to get equipment back on the job fast.

QUICK-PIC interchanges more than 140,000 construction equipment manufacturer's part numbers with the right, high-quality Gates replacement. Your Gates Construction Distributor can then fabricate a replacement assembly to the right hose length in minutes, including fittings and protectors.

Accurate Inventory Manager

Matches hose and connector inventory to your equipment.

With AIM, you get the parts you need, when you need them, at a price you can afford. AIM matches your Gates Construction Distributor's inventory to your exact equipment needs – by manufacturer and model.

No more guesswork. No more shopping around for a part. AIM tells your distributor exactly what parts to stock.

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


TEMPERATURE LIMITS

Agency and Industry Hose, Coupling & Assembly Specifications

ABS — American Bureau of Shipping

AS 2260 — Australian Standard

BV — Bureau Veritas (Marine Division), International

DNV — Det Norske Veritas (North Sea Floating Vessels), International

DIN — Deutsch Industry Norm, International

GL — Germanischer Lloyd's, International

IJS — Industrial Jack Specifications, USA

LR — Lloyd's Register, International

RCCC — Regular Common Carrier Conference for fleet Truck & Bus, USA

DOT — Department of Transportation, USA

FMVSS — Federal Motor Vehichle Safety Standard, USA

MSHA 2G — Mine Safety & Health Administration, USA

FRAS — Fire Retardant Anti Static, Australia

USCG — United States Coast Guard

ISA — International Standards Organization

SAE — Society of Automotive Engineers

EN — European Norm

Temperature Limits For Gates Hydraulic Hoses

Caution: Water, water/oil emulsions and water/glycol solutions must be kept below the temperatures listed in the table below, relative to line pressures.

Caution: The fluid manufacturer's recommended maximum operating temperature for any given fluid must not be exceeded. If different than the above listed hose temperatures, the lower limit must take precedence. Actual service life at temperatures approaching the recommended limit will depend on the particular application and the fluid being used in the hose. Intermittent (up to 10% of operating time) refers to momentary temperature surges. Detrimental effects increase with increased exposure to elevated temperatures.

Do NOT expose hose to maximum temperature and maximum rated working pressure at the same time.

Maximum Temperature Limits for Water, Water/Oil Emulsions and Water/Glycol Solutions

Hose

G8K, EFG6K, EFG5K, EFG4K, EFG3K, G2, G2L, MCPB, G1, M2T®, M6K, M5K, M4K, M3K, RFS, RLA, C5C, C5E, CPS, LOC, LOL

G2H, G1H, MegaTech™ hose line, G2XH, C5D, G3H, GTH, G4H, GMV, RLC, TR500, PowerClean™, M3KH, M4KH

Pressure Lines

+200°F(+93°C)

+225°F(+107°C)

Return Lines

+180°F(+82°C)

+180°F(+82°C)

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


AGENCY SPECIFICATIONS

Gates Hose Type

Agency Specifications Industry Specifications (PSI Performance)

ABSAS

2260BV DNV DIN GL IJS LR RCCC

DOT / FMVSS

MSHA2G

FRASUSCG J1942

SAE ISO ENFuel Oil Power

EFCPS X X Gates Proprietary Design

EFLW X X Gates Proprietary Design

LW X X Gates Proprietary Design

CPB X X Gates Proprietary Design

100MP/Mine Spray X X Gates Proprietary Design

Scorpion Gates Proprietary Design

Rock Dust X X Gates Proprietary Design

18MB Gates Proprietary Design

500MP X X Gates Proprietary Design

G8K X Gates Proprietary Design

EFG6K X X X X X X X X X X 100R15 3862 R15 EN 856 4SP/4SH

EFG5K X X X X X X X X X X 100R13 3862 R13 EN 856 4SP/4SH

EFG4K X X X X X X X X X X 100R12 3862 R12 EN 856 4SP++

EFG3K X X X X X X X X X X 100R12 3863 R12 EN 856 4SP

M-XP X X Gates Proprietary Design

M2T® X X X X X 100R16 11237 2SC R16 857 2SC

CM2TDL X X X X X 100R16 1436 2SC R16 857 2SC

M6K X X X X X X Gates Proprietary Design

M5K X X X X X X X Gates Proprietary Design

M4K X X X X X X X X X X 100R19 11237 R19 –

M4KH X X X X 100R19 11237 R19 –

M3K X X X X X X X X X X X 100R17 11237 R17 –

M3KH X X X X 100R17 11237 R17 –

G2 X x X X X X x X X X 100R2 S 1436 2SN R2 853 2SN

G2H X X X X X X X 100R2 S 1436 2SN R2 853 2SN

G2XH X X X X 100R2 S 1436 2SN R2 853 2SN

G2L X X X 100R2 S 1436 2SN R2 853 2SN

J2AT X X X Gates Proprietary Design

G1 X X X X X X X X X X 100R1 S 1436 1SN R1 853 1SN

G1H X X X X X* X 100R1 S 1436 1SN R1 853 1SN

RFS X X Gates Proprietary Design

G3H X 100R3 – 854 R3

GTH X 100R6 – 854 R6

GTHX X 100R6 – 854 R6

G4H X X X 100R4 – –

GMV X X X X X 100R4 – –

RLA X 30R2 – –

RLC Gates Proprietary Design

LOC 30R7 – –

LOL X Gates Proprietary Design

++ -12 & -16 EFG4K*G1H sizes -6, -8, -12 & -16**TH7NC Meets ANSI A92.2 for vehicle mounted aerial devices (-3 to -8)*** Needs fire sleeve when it is used for ABS application**** LOLA Black cover only

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


++ -12 & -16 EFG4K*G1H sizes -6, -8, -12 & -16**TH7NC Meets ANSI A92.2 for vehicle mounted aerial devices (-3 to -8)*** Needs fire sleeve when it is used for ABS application**** LOLA Black cover only

Gates Hose Type

Agency Specifications Industry Specifications (PSI Performance)

ABSAS

2260BV DNV DIN GL IJS LR RCCC

DOT / FMVSS

MSHA2G

FRASUSCG J1942

SAE ISO ENFuel Oil Power

TR500 X J1402 – –

MegaTech™ II 100R2 AT, J1405 part 5 – –

MegaTech™ G5TB J1405 part 6 – –

MegaTech™ 3000 J1405 part 6 – –

MegaTech™ 1000 X J1405 part 6, J1402 – –



MegaTech™ LOC J1405 part 6 – –

C5C X X 100R5, J1402 – –

C5D X X 100R5, J1402, J1405 – –

C5M X X X X 100R5, J1527 A – –

C5E X X 100R5, J1402 – –

C14 100R14 – –

TH7, TH7NC** 100R7 3949 3949

TH8, TH8NC 100R8 3949 3949

TH18, TH18NC 100R18 3949 3949

PolarSeal® AC134a J51 "A2 & D", J2064 "C", Class 2 – –

PolarSeal® ACC-PSII J2064 "C", Class 1 – –

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


SPECIALIZED MINING HOSE

Meets Flame Resistance Acceptance Designation "MSHA 2G"

Recommended For: High-pressure hydraulic lines in longwall mining equipment and roof-support systems; petroleum-based or water emulsion fluids. Meets pressure requirements of EN 856 4SH. Available in cut length and/or 121' to 200' continuous lengths.

Tube: Black, oil resistant, synthetic rubber (Nitrile).

Reinforcement: Four layers of alternated, spiraled, high-tensile steel wire over a layer of fabric on -12 and -16 sizes - six layers of alternated, spiraled, high-tensile steel wire over a layer of fabric on -20, -24 and -32 sizes.

Cover: Black, oil and abrasion resistant, synthetic rubber (Neoprene). Yellow layline stripe.

Temperature Range: -40°F to +250°F (-40°C to +121°C). For water emulsions see Temperature Limits Table.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GSH and GSM Couplings (-24 and -32) GlobalSpiral™ Couplings (-12, -16 and -20)

Gates Proprietary Hose: Superior to SAE and ISO Specifications.

Product Min. Burst MBR Description Number (in) (in) (Max.psi)1 (Max.psi)2 Pressure (psi) (in) (Lbs.)12EFCPS 4651-1718 3/4 1.24 6000 7000 24,000 9.5 .9 16EFCPS 4651-1704 1 1.53 6000 7000 24,000 12.0 1.4820EFCPS 4651-1701 1 1/4 1.97 6000 7000 24,000 16.5 2.6520EFCPS 4651-1705 1 1/4 1.97 6000 7000 24,000 16.5 2.7924EFCPS 4651-1702 1 1/2 2.26 5000 6000 20,000 20.0 3.1924EFCPS 4651-1706 1 1/2 2.26 5000 6000 20,000 20.0 3.2632EFCPS 4651-1703 2 2.80 5000 6000 20,000 25.0 4.7932EFCPS 4651-1707 2 2.80 5000 6000 20,000 25.0 4.671 Meets or exceeds SAE, ISO pressure requirements and EN 856 4SH dynamic working pressure. 2 Static working pressure means very little pressure surging as, for example, in longwall internal hydraulic roof support systems.

EF Coal Power/Longwall Mine Hose

EFCPSProd

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



Recommended For: High-pressure hydraulic lines in longwall mining equipment and roof-support systems; petroleum-based or water emulsion fluids. Meets pressure requirements of EN 856 4SH. Available in cut lengths.


Reinforcement: Four layers of alternated, spiraled, high-tensile steel wire over a layer of fabric on -12 and -16 sizes - six layers of alternated, spiraled, high-tensile steel wire over a layer of fabric on -20, -24 and -32 sizes.

Cover: Black, oil and abrasion resistant MegaTuff cover with synthetic rubber (Neoprene Type A base) with yellow color layline. Also available in standard cover.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GSH and GSM Couplings (-24 and -32) GlobalSpiral™ Couplings (-12, -16 and -20)


Product Min. Burst MBR Description Number (in) (in) (Max.psi)1 (Max.psi)2 Pressure (psi) (in) (Lbs.)

12EFCPS-MTF 4651-1720 3/4 1.24 6000 7000 24000 9.5 .995

16EFCPS-MTF 4651-1708 1 1.53 6000 7000 24000 12.0 1.54

20EFCPS-MTF 4651-1709 1 1/4 1.97 6000 7000 24000 16.5 2.64

24EFCPS-MTF 4651-1710 1 1/2 2.26 5000 6000 20000 20.0 3.14

32EFCPS-MTF 4651-1711 2 2.80 5000 6000 20000 25.0 4.86

1 Meets or exceeds SAE, ISO and EN 856 4SH dynamic working pressure.2 Static working pressure means very little pressure surging as, for example, in longwall internal hydraulic roof support systems.

EF Coal Power/Longwall Mine Hose - MegaTuff®

EFCPS-MTF

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts




Recommended For: High-pressure hydraulic lines in longwall mining equipment and roof-support systems; petroleum-based or water emulsion fluids. Available in 121' to 200' continuous lengths. 12EFLW meets the static pressure requirements of longwall mining equipment. 16EFLW meets pressure requirements of longwall mining equipment and EN 856 4SP.


Reinforcement: Four layers of alternated, spiraled, high-tensile steel wire over a layer of fabric.

Cover: Black, oil and abrasion resistant, synthetic rubber (Neoprene). Yellow color layline stripe.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GlobalSpiral™ Couplings (-12, -16 and -20) GSP (-24 and -32)


Product Min. Burst MBR Description Number (in) (in) (Max.psi)1 (Max.psi)2 Pressure (psi) (in) (Lbs.)8EFLW 4651-1541 1/2 .94 4000 5000 16000 7.0 .5912EFLW 4651-1716 3/4 1.21 4000 5000 16000 4.7 .87316EFLW 4651-1717 1 1.50 4000 5000 16000 6.0 1.2820EFLW 4651-1542 1 1/4 1.85 4000 5000 16000 16.5 1.8824EFLW 4651-1543 1 1/2 2.11 3000 4000 12000 20.0 2.132EFLW 4651-1544 2 2.63 3000 4000 12000 30.0 2.93

1 Impulse pressure rating.2 Static working pressure means very little pressure surging as, for example, in longwall internal hydraulic roof support systems.

EF Longwall Mine Hose

EFLWProd

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



Recommended For: High-pressure hydraulic lines in longwall mining equipment and roof-support systems; petroleum-based or water emulsion fluids. Available in cut lengths. 12EFLW meets the static pressure requirements of longwall mining equipment. 16EFLW meets pressure requirements of longwall mining equipment and EN 856 4SP.


Reinforcement: Four layers of alternated, spiraled, high-tensile steel wire over a layer of fabric.

Cover: Black, oil and abrasion resistant MegaTuff cover with synthetic rubber (Neoprene Type A base) with yellow color layline. Also available in standard cover.

Temperature Range: - 40°F to +250°F (-40°C to +121°C). For water emulsions see Temperature Limits Table.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GlobalSpiral™ Couplings (-12, -16 and -20) GSP (-24 and -32)


Product Min. Burst MBR Description Number (in) (in) (Max.psi)1 (Max.psi)2 Pressure (psi) (in) (Lbs.)12EFLW-MTF 4651-1712 3/4 1.21 4000 5000 16000 4.7 .9216EFLW-MTF 4651-1713 1 1.50 4000 5000 16000 6.0 1.3220EFLW-MTF 4651-1804 1 1/4 1.85 4000 5000 16000 16.5 1.8824EFLW-MTF 4651-1805 1 1/2 2.11 3000 4000 12000 20.0 2.1032EFLW-MTF 4651-1806 2 2.63 3000 4000 12000 30.0 2.93

1 Impulse pressure rating.2 Static working pressure means very little pressure surging as, for example, in longwall internal hydraulic roof support systems.

EF Longwall Mine Hose - MegaTuff®

EFLW-MTF

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts




Meets performance of British Coal Specification BCS174

Recommended For: High-pressure hydraulic lines in longwall mining equipment and roof-support systems; petroleum-based or water emulsion fluids.


Reinforcement: Two braids of high-tensile steel wire.

Cover: Black, oil and abrasion resistant, synthetic rubber (Nitrile). White color layline.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): MegaCrimp® Couplings (-4, -6, -8, -12, -16 and -20) GSP (-24 and -32)


Product Min. Burst MBR Description Number (in) (in) (Max.psi)1 (Max.psi)2 Pressure (psi) (in) (Lbs.)4CPB 4657-2548 1/4 .59 6525 11050 26100 4.0 .276CPB 4657-2549 3/8 .74 5500 9575 22000 5.0 .388CPB 4657-2550 1/2 .87 5250 6400 21000 6.0 .4712CPB 4657-2551 3/4 1.15 4000 4950 16000 9.0 .6916CPB 4657-2552 1 1.48 3125 3775 12500 12.0 1.0420CPB 4657-2553 1 1/4 1.87 2500 2900 10000 15.0 1.5724CPB 4657-4525 1 1/2 2.11 1300 1500 5200 20.0 1.5932CPB 4657-4526 2 2.62 1175 1350 4700 25.0 2.28

1 This working pressure per BCS174 means frequent pressure surges. Qualification testing requires 100,000 impulse cycles at 133% of the dynamic working pressure.2 This working pressure means very little pressure surging. BCS174 says that the internal hydraulic circuit of a roof support system represents an almost steady-state

condition with little or no dynamic loading, and hoses consequently will tolerate higher ratings. Determined by EN 853 2SN, it is the allowable working pressure under static load that approximates a 1:2.5 ratio to burst pressure. This is based on the EN specification burst pressures and not the higher Gates minimum burst pressures listed above.

Coal Power/Longwall Mine Hose - CPB Mine

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



Meets performance of British Coal Specification BCS174

Recommended For: High-pressure hydraulic lines in longwall mining equipment and roof-support systems; petroleum-based or water emulsion fluids.



Cover: Black, oil and abrasion resistant MegaTuff cover with synthetic rubber (Neoprene Type A base). Also available in standard cover.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): MegaCrimp® Couplings (-4, -6, -8, -12, -16, -20) GSP (-24 and -32)


Product Min. Burst MBR Description Number (in) (in) (Max.psi)1 (Max.psi)2 Pressure (psi) (in) (Lbs.)4CPB-MTF 4657-1451 1/4 .59 6525 11050 26100 4.0 .276CPB-MTF 4657-1452 3/8 .74 5500 9575 22000 5.0 .388CPB-MTF 4657-1453 1/2 .87 5250 6400 21000 6.0 .4612CPB-MTF 4657-1454 3/4 1.15 4000 4950 16000 9.0 .716CPB-MTF 4657-1455 1 1.48 3125 3775 12500 12.0 1.0620CPB-MTF 4657-1456 1 1/4 1.87 2500 2900 10000 15.0 1.6124CPB-MTF 4657-4426 1 1/2 2.11 1300 1500 5200 20.0 2.132CPB-MTF 4657-4427 2 2.62 1175 1350 4700 25.0 2.93

1 This working pressure per BCS174 means frequent pressure surges. Qualification testing requires 100,000 impulse cycles at 133% of the dynamic working pressure.2 This working pressure means very little pressure surging. BCS174 says that the internal hydraulic circuit of a roof support system represents an almost steady-state

condition with little or no dynamic loading, and hoses consequently will tolerate higher ratings. Determined by EN 853 2SN, it is the allowable working pressure under static load that approximates a 1:2.5 ratio to burst pressure. This is based on the EN specification burst pressures and not the higher Gates minimum burst pressures listed above.

Coal Power/Longwall Mine Hose - CPB Mine - MegaTuff® Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



Air and Multi-Purpose HoseTerminator®

(Specification 3202T, 3202TW)

Standard Reel Packaging

Exact Length 500 Foot One Piece Reels

Product Max. Suction MBR Weight Std. Number WP (in. Hg) (in) (Lbs.) Pack3202-0001 1/4 .57 501 30.0 3.0 .15 Reel3202-0006 3/8 .75 501 25.0 3.0 .19 Reel3202-0011 1/2 .89 501 25.0 5.0 .25 Reel3202-0016 3/4 1.22 501 15.0 6.0 .45 Reel3202-0021 1 1.51 501 10.0 8.0 .57 Reel3202-0027 1 1/4 1.78 501 10.0 10.0 .73 Reel3202-0029 1 1/2 2.09 501 10.0 12.0 .96 100 ft.3202-0032 2 2.64 501 10.0 14.0 1.35 100 ft.3202-0033 2 2.64 501 10.0 14.0 1.35 200 ft.

Product Max. Suction MBR Weight Std. Number WP (in. Hg) (in) (Lbs.) Pack3202-0301 1/4 .57 501 30.0 3.0 .15 Reel3202-0306 3/8 .75 501 25.0 3.0 .19 Reel3202-0311 1/2 .89 501 25.0 5.0 .25 Reel3202-0316 3/4 1.22 501 15.0 6.0 .42 Reel

Meets Flame Resistance Acceptance Designation "MSHA 30 CFR-18.65"

Recommended For: Applications requiring a premium-quality, multi-purpose hose with superior abrasion resistance for air, oil and some chemical applications. Excellent durability for extra long life in these applications: mining, air drill, construction and other severe service. Good weather and ozone resistance.

Temperature: -40°F to +212°F (-40°C to +100°C) continuous service.

Construction Tube: Type C (Nitrile). Black.

Construction Reinforcement: Synthetic, high tensile textile cord.

Construction Cover: Type C4 (Carboxylated Nitrile). Yellow.

Packaging: 1/4" through 3/4": Packaged in 500' to 700' reels. Maximum 2 pieces in 50' increments. 1" and 1 1/4": Packaged in 300' to 400' reels. Maximum 3 pieces. Minimum length 50'. 1 1/2" and 2": Packaged 100' coiled and wrapped in polyethylene. Minimum of 90% of hose reels will be 1-piece lengths. Exact length reels: 500' in one continuous length.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): MegaCrimp® couplings (through 1 1/4") GLX Couplings (through 1 1/4") GSP Couplings (1 1/2" and 2" only)

TERMINATOR®Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Air and Multi-Purpose HosePremo Flex® AR

(Specification 3205AR)

Standard Reel Packaging

Exact Length 500 Foot One Piece Reels

Product Max. Suction MBR Weight Std. Number WP (in. Hg) (in) (Lbs.) Pack3205-0401 1/4 .53 300 30.0 2.0 .10 Reel3205-0402 3/8 .70 300 30.0 3.0 .16 Reel3205-0403 1/2 .84 300 25.0 4.0 .22 Reel3205-0404 3/4 1.19 300 20.0 5.0 .40 Reel3205-0405 1 1.50 300 10.0 8.0 .59 Reel

Product Max. Suction MBR Weight Std. Number WP (in. Hg) (in) (Lbs.) Pack3205-0406 1/4 .53 300 30.0 2.0 .10 5003205-0407 3/8 .70 300 30.0 3.0 .16 5003205-0408 1/2 .84 300 25.0 4.0 .22 5003205-0409 3/4 1.19 300 20.0 5.0 .40 500


Recommended For: Applications requiring a premium grade spiral hose with superior abrasion resistance, excellent flexibility and maximum resistance to air, water, petroleum oils and lubricating oils (to 212°F). Recommended for gasoline, kerosene, and fuel oil transfer only to 120°F. Good weather and ozone resistance.



Construction Reinforcement: Synthetic, high tensile textile cord.

Construction Cover: Type C4 (Carboxylated Nitrile). Red.

Packaging: 1/4" through 3/4": Packaged in 500' to 700' reels. Maximum 2 pieces in 50' increments. 1": Packaged in 300' to 400' reels. Maximum 2 pieces in 50' increments. Minimum of 90% of hose reels will be 1-piece lengths. Exact length reels: 500' in one continuous length.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): MegaCrimp® Couplings GLX Couplings

PREMOFLEX® AR

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



1000 MP/Mine Spray(Specification 3619M)

Product Max. Suction MBR Weight Std. Number WP (in. Hg) (in) (Lbs.) Pack3619-0699 1/2 .84 1000 30.0 5.0 .29 50 ft.3619-0700 3/4 1.10 1000 25.0 8.0 .43 50 ft.3619-0701 1 1.42 1000 25.0 11.0 .66 50 ft.3619-0702 1 1/4 1.69 1000 20.0 16.0 .81 50 ft.3619-0708 1 1/2 1.92 1000 15.0 18.0 1.07 50 ft.3619-0745 2 2.45 1000 10.0 25.0 1.47 50 ft.3619-0716 1/2 .84 1000 30.0 5.0 .29 100 ft.3619-0721 3/4 1.10 1000 25.0 8.0 .43 100 ft.3619-0786 1 1.42 1000 25.0 11.0 .66 100 ft.3619-0787 1 1/4 1.69 1000 20.0 16.0 .81 100 ft.3619-0788 1 1/2 1.92 1000 15.0 18.0 1.07 100 ft.3619-0745 2 2.45 1000 10.0 25.0 1.47 100 ft.3619-0761 1/2 .84 1000 30.0 5.0 .29 Bulk 50 ft.3619-0762 3/4 1.10 1000 25.0 8.0 .43 Bulk 50 ft.3619-0763 1 1.42 1000 25.0 11.0 .66 Bulk 50 ft.3619-0764 1 1/4 1.69 1000 20.0 16.0 .81 Bulk 50 ft.3619-0765 1 1/2 1.92 1000 15.0 18.0 1.07 Bulk 50 ft.3619-0766 2 2.45 1000 10.0 25.0 1.47 Bulk 50 ft.3619-0789 3/4 1.10 1000 25.0 8.0 .43 Bulk 100 ft.3619-0790 1 1.42 1000 25.0 11.0 .66 Bulk 100 ft.3619-0791 1 1/4 1.69 1000 20.0 16.0 .81 Bulk 100 ft.3619-0792 1 1/2 1.92 1000 15.0 18.0 1.07 Bulk 100 ft.


Recommended For: High-pressure water service in underground mining applications and hot water washdown service.

Temperature: -40°F to +212°F (-40°C to +100°C) service range.

Construction Tube: Type P (EPDM). Black.

Construction Reinforcement: Braided, high tensile steel wire.

Construction Cover: Type C2 (Modified Nitrile). Yellow (non-marking). All sizes are perforated.

Packaging: 1/2" through 2": 50' and 100' lengths, one length coiled in a carton. 1/2" x 50': Packaged 1200' per bulk carton, each length coiled and tied. 3/4" x 50': Packaged 1000' per bulk carton, each length coiled and tied. 3/4" x 100': Packaged 500' per bulk carton, each length coiled and tied. 1" x 50': Packaged 700' per bulk carton, each length coiled and tied. 1" x 100': Packaged 400' per bulk carton, each length coiled and tied. 1 1/4" x 50': Packaged 600' per bulk carton, each length coiled and tied. 1 1/4" x 100': Packaged 300' per bulk carton, each length coiled and tied. 1 1/2" x 50': Packaged 400' per bulk carton, each length coiled and tied. 1 1/2" x 100': Packaged 200' per bulk carton, each length coiled and tied. 2" x 50': Packaged 200' per bulk carton, each length coiled and tied. Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): MegaCrimp® (1/2" through 1 1/4") GSP (1 1/2" and 2" only)

Mining Hose

1000 MP/MINE SPRAYProd

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Mining Hose Longwall Mine Emulsion(Specification 3619MC, 3619MY)

Black Cover (3619MC)

Product Max. Suction MBR Weight Std. Number WP (in. Hg) (in) (Lbs.) Pack3619-0809 2 1/2 3.34 1000 10.0 20.0 3.17 50 ft.3619-0810 3 3.91 1000 10.0 20.0 4.14 50 ft.3619-0811 2 1/2 3.34 1000 10.0 20.0 3.17 100 ft.3619-3531 3 3.91 1000 10.0 20.0 4.14 100 ft.


Recommended For: Flexible connections in high pressure water distribution and emulsion systems used in a variety of industries. The thick cover meets MSHA's self-extinguishing requirements, and is designed for the rough mining environment.

Temperature: -40°F to +212°F (-40°C to +100°C) normal service.

Construction Tube: Type A (Neoprene). Black.


Construction Cover: Type C2 (Specially Compounded Elastomer). Black. Type C4 (Modified Nitrile). Yellow (non-marking).

Packaging: All lengths coiled in a carton.

Coupling Recommendation Wildman Reusable Male Dixon Holedell Style 2 1/2 LW (see Crimp Data Manual 35019 or eCrimp for details)

Yellow Cover (3619MY)

Product Max. Suction MBR Weight Std. Number WP (in. Hg) (in) (Lbs.) Pack3619-0051 3 3.91 1000 10.0 20.0 4.14 50 ft.3619-3530 3 3.91 1000 10.0 20.0 4.14 100 ft.

LONGWALL MINE EMULSION

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



Product Max. Suction MBR Weight Std. Number WP (in. Hg) (in) (Lbs.) Pack3618-0311 1 1/2 2.02 600 — 12.0 1.13 50 ft.3618-0312 2 2.62 600 — 16.0 1.51 50 ft.3618-0313 2 1/2 3.12 600 — 18.0 1.89 50 ft.3618-0314 3 3.64 600 — 20.0 2.46 50 ft.3618-0315 4 4.79 600 — 25.0 4.10 50 ft.


Recommended For: High-pressure and high temperature air hose used on industrial, construction, pneumatic mining and drilling applications requiring a wire braided hose with a high degree of hot air resistance.

Temperature: -40°F to +300°F (-40°C to +149°C).

Construction Tube: Type J (CPE). Black.


Construction Cover: Type J (CPE). Black. All sizes perforated.

Packaging: 50' per carton +/- 10'. Maximum of 2 pieces. Minimum length 10'.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GSP (-24 and -32)

Mining Hose

SCORPION®

Scorpion™

(Specification 3618MT)

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Mining Hose18MB Air Drill

(Specification 3618, 3618GL)

Product Max. Suction MBR Weight Std. Number WP (in. Hg) (in) (Lbs.) Pack3618-0011 3/4 1.28 500 25.0 6.0 .41 50 ft.3618-0021 1 1.55 500 25.0 8.0 .8 50 ft.3618-0031 1 1/4 1.80 500 15.0 10.0 1.02 50 ft.3618-0041 1 1/2 2.21 500 15.0 12.0 1.42 50 ft.3618-0051 2 2.77 500 15.0 14.0 2.3 50 ft.3618-1000 2 2.77 500 15.0 14.0 1.99 100 ft. 3618-0201 2 1/2 3.46 500 10.0 30.0 3.28 50 ft.3618-0205 2 1/2 3.46 500 10.0 30.0 3.28 60 ft.3618-0215 3 3.97 500 10.0 36.0 4.1 50 ft.3618-0225 4 5.06 500 10.0 47.6 5.32 50 ft.


Recommended For: Extra heavy duty, high pressure use on industrial, construction and pneumatic mining applications requiring wire braided hose with an oil resistant tube and abrasion resistant cover.


Construction Tube: Type A (Neoprene). Black.


Construction Cover: Type C2 (Modified Nitrile). Gray with yellow stripe. All sizes are perforated. For 3/4" through 1 1/4" sizes only. Type D3 (Natural Rubber). Gray with yellow stripe. All sizes are perforated. For 1 1/2" through 4" sizes only.

Packaging: 3/4" through 1 1/2": Packaged 49' - 50' length coiled in carton. 2" though 4": Packaged 48' - 50' length coiled in carton. 2 1/2" x 60': Packaged 60' length coiled in carton.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GSP (1 1/2" and 2")

18MB AIR DRILL

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



Mining Hose500 MP Air Drill

(Specification 3618, 3618Y)

Product Max. Suction MBR Weight Std. Number WP (in. Hg) (in) (Lbs.) Pack3618-0801 3/4 1.11 500 25.0 6.0 .41 100 ft.3618-0802 1 1.45 500 25.0 8.0 .66 100 ft.3618-0803 1 1/4 1.74 500 15.0 10.0 .86 100 ft.3618-0804 1 1/2 1.99 500 15.0 12.0 1.00 100 ft.3618-0805 2 2.50 500 15.0 14.0 1.39 100 ft.3618-0806 2 1/2 3.14 500 10.0 30.0 2.15 100 ft.3618-0807 3 3.67 500 10.0 36.0 2.77 100 ft.


Recommended For: Heavy-duty, high pressure use on industrial, construction and pneumatic mining applications requiring wire braided hose with an oil resistant tube and abrasion resistant cover.




Construction Cover: Type D3 (Natural Rubber). Black with yellow spiral stripe. All sizes are perforated. Type C2 (Modified Nitrile). Yellow with black spiral stripe. All sizes are perforated.

Packaging: 100' length coiled in a carton.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GSP (-24 and -32)

Black Cover (3618)

Product Max. Suction MBR Weight Std. Number WP (in. Hg) (in) (Lbs.) Pack3618-0808 3/4 1.11 500 25.0 6.0 .41 100 ft.3618-0809 1 1.45 500 25.0 8.0 .65 100 ft.3618-0810 1 1/4 1.74 500 15.0 10.0 .85 100 ft.3618-0811 1 1/2 1.99 500 15.0 12.0 1.00 100 ft.3618-0812 2 2.50 500 15.0 14.0 1.39 100 ft.3618-0813 2 1/2 3.14 500 10.0 30.0 2.15 100 ft.3618-0814 3 3.67 500 10.0 36.0 2.77 100 ft.

Yellow Cover (3618Y)

500 MP AIR DRILLProd

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Mining HoseRock Dust

(Specification 4691)

Product Max. Suction MBR Weight Std. Number WP (in. Hg) (in) (Lbs.) Pack4691-0700 1 1/4 1.67 100 30.0 6.0 .56 100 ft.4691-0701 1 1/2 1.92 100 30.0 8.0 .66 100 ft.4691-0702 2 2.41 100 30.0 10.0 .82 100 ft.4691-0703 2 1/2 2.92 100 30.0 12.0 .98 100 ft.4691-0704 3 3.41 100 30.0 15.0 1.29 100 ft.


Recommended For: Rock dusting applications in underground coal mines where limestone dust (or other inert rock-derived dusting agent) is sprayed in order to isolate exposed coal surfaces from potential heat or ignition sources.

Temperature: -40°F to +180°F (-40°C to +82°C).

Construction Tube: Type D (Natural Rubber). Black.

Construction Reinforcement: Synthetic, high tensile textile with steel wire helix.

Construction Cover: Type C2 (Modified Nitrile). Black with yellow spiral stripe.

Packaging: 100' length coiled and wrapped in polyethylene

Coupling Recommendation: Multiple - contact Gates PA Hotline 303-744-5070 for additional information

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


SPECIALIZED MINING COUPLINGS, ADAPTERS AND ACCESSORIES

Press-Lok® Couplings

C

L

L

C

C

L

C

L

GlobalSpiral™ High Press-Lok® Super - Male Couplings Product Hose ID Length CutoffDescription Number (in) (in) (in)24GSH-24PLSOR 7341-02615 1 1/2 7.13 3.3932GSH-32PLSOR 7341-06495 2 8.06 3.59

GlobalSpiral™ Press-Lok® Super - Male Couplings Product Hose ID Length CutoffDescription Number (in) (in) (in)8GS-8PLSOR 7347-72865 1/2 3.21 1.7312GS-12PLSOR 7347-72875 3/4 3.96 1.9716GS-16PLSOR 7347-72885 1 5.00 2.7620GS-20PLSOR 7347-72855 1 1/4 5.92 3.13

GlobalSpiral™ High Press-Lok® Super - Male Couplings With Hammer Flange Product Hose ID Length CutoffDescription Number (in) (in) (in)24GSH-24PLSORHF 7341-02605 1 1/2 7.56 3.8232GSH-32PLSORHF 7341-06525 2 8.50 4.0132GSM-32PLSORHF 7341-20525 2 8.50 4.01Includes O-rings and back-up rings.

GlobalSpiral™ Press-Lok® Super - Male Couplings With Hammer Flange Product Hose ID Length CutoffDescription Number (in) (in) (in)20GS-20PLSORHF 7347-72895 1 1/4 6.22 3.42Includes O-rings and back-up rings.

GlobalSpiral™ High Press-Lok® Super - Female Couplings Product Hose ID Length CutoffDescription Number (in) (in) (in)24GSH-24FPLS 7341-02625 1 1/2 7.50 3.7632GSH-32FPLS 7341-06515 2 8.50 4.01

GlobalSpiral™ Press-Lok® Super - Female Couplings Product Hose ID Length CutoffDescription Number (in) (in) (in)8GS-8FPLS 7347-72905 1/2 3.00 1.5312GS-12FPLS 7347-72915 3/4 4.25 2.2416GS-16FPLS 7347-72925 1 5.25 3.0220GS-20FPLS 7347-72935 1 1/4 6.00 3.2024GSP-24FPLS 7347-72945 1 1/2 6.50 3.6032GSP-32FPLS 7347-72955 2 7.24 3.62

GlobalSpiral™ Press-Lok® - Male Couplings Product Hose ID Length CutoffDescription Number (in) (in) (in)6GS-6PL 7347-72145 3/8 3.00 1.548GS-8PL 7347-72245 1/2 3.01 1.5012GS-12PL 7347-72445 3/4 3.70 1.7016GS-16PL 7347-72555 1 4.13 1.8920GS-20PL 7347-72645 1 1/4 4.92 2.1224GSP-24PL 7347-72725 1 1/2 5.39 2.5032GSP-32PL 7347-72795 2 6.14 2.52Meets or exceeds SAE J1467. Includes O-rings and back-up rings.

C

L

C

L

C

L

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Press-Lok® Couplings

C

L

C

L

C

L

C

L

MegaCrimp® Press-Lok® - Male Couplings Product Hose ID Length CutoffDescription Number (in) (in) (in)4G-4PL 7100-14585 1/4 2.56 1.544G-6PL 7100-14595 1/4 2.58 1.566G-6PL 7100-14605 3/8 2.64 1.548G-8PL 7100-04615 1/2 3.01 1.5412G-12PL 7100-04625 3/4 3.56 1.5616G-16PL 7100-04635 1 4.13 1.9020G-20PL 7100-04645 1 1/4 4.25 1.93Meets or exceeds SAE J1467. Includes O-rings and back-up rings.

GlobalSpiral™ Press-Lok® - Female Couplings Product Hose ID Length CutoffDescription Number (in) (in) (in)32GSP-32FPL 7347-72815 2 5.91 2.28Meets or exceeds SAE J1467.

GlobalSpiral™ Press-Lok® Low-profile - Male Couplings Product Hose ID Length CutoffDescription Number (in) (in) (in)24GSP-24PLLM 7347-7966 1 1/2 5.91 3.0132GSP-32PLLM 7347-7968 2 6.10 2.48Includes O-rings and back-up rings.

GlobalSpiral™ Press-Lok® Low-profile - Female Couplings Product Hose ID Length CutoffDescription Number (in) (in) (in)24GSP-24PLLF 7347-7967 1 1/2 5.67 2.7732GSP-32PLLF 7347-7969 2 6.10 2.48

Longwall Mine Emulsion Hose coupling ™ Press-Lok® Low-profile - Male Coupling Product C LDescription Number (mm) (mm)40LW-40PLLM 7107-1000 72.5 155.00

Longwall Mine Emulsion Hose coupling ™ Press-Lok® Low-profile - Female Coupling Product C LDescription Number (mm) (mm)40LW-40PLLF 7107-1001 77.5 160.00

Longwall Mine Emulsion Hose Ferrule Product LDescription Number (mm)40LW1F 7107-1002 76.20

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts

C

L

L

C

L


Press-Lok® Super Adapters


Male Press-Lok® Super to Female Press-Lok®

Product C T1 LDescription Number (mm) (in) (mm)20MSH-6FSA 7304-6040 70 1 1/4 81.0020MSH-12FSA 7304-6041 70 1 1/4 81.0020MSH-16FSA 7304-6299 70 1 1/4 90.0020MSH-20FSA 7304-6042 70 1 1/4 100.0020MSH-24FSA 7304-6037 70 1 1/4 116.0020MSH-32FSA 7304-6038 70 1 1/4 116.0024MSH-16FSA 7304-6039 82 1 1/2 128.0024MSH-20FSA 7304-6043 82 1 1/2 128.0024MSH-32FSA 7304-6045 82 1 1/2 128.0032MSH-20FSA 7304-6044 95 2 128.0032MSH-24FSA 7304-6046 95 2 132.00

Male Press-Lok® Super to Female Press-Lok® Super Straight Product C T1 LDescription Number (mm) (in) (mm)20MSH-20FSH 7304-6224 70 1 1/4 100.0024MSH-20FSH 7304-6225 82 1 1/2 128.00

Male Press-Lok® Super to Female Press-Lok® Super - 45° Product T1 A LDescription Number (in) (mm) (mm)8MSH-8FSH45 7304-6302 1/2 40 37.0012MSH-12FSH45 7304-6342 3/4 50 43.0016MSH-16FSH45 7304-6304 1 65 55.00

Male Press-Lok® Super to Female Press-Lok® Super - 90° Product T1 A LDescription Number (in) (mm) (mm)12MSH-12FSH90 7304-6343 3/4 40 60.0016MSH-16FSH90 7304-6300 1 55 65.0020MSH-20FSH90 7304-6301 1 1/4 70 75.0024MSH-24FSH90 7304-6221 1 1/2 82 90.00

Female Press-Lok® Super to Female Press-Lok® Super Straight Reference Product Coupling A LDescription Number (in) (mm) (mm)8FSH-8FSH 7304-6269 1/2 - 1/2 35 65.0012FSH-12FSH 7304-6270 3/4 - 3/4 40 70.0016FSH-16FSH 7304-6271 1 - 1 55 80.0020FSH-20FSH 7304-6000 1 1/4 - 1 1/4 70 90.0024FSH-24FSH 7304-6001 1 1/2 - 1 1/2 82 100.0032FSH-32FSH 7304-6002 2 - 2 95 100.00

Female Press-Lok® Super Y Product A LDescription Number (mm) (mm)20-20-20FSHY 7304-6026 135 130.0032-32-32FSHY 7304-6130 170 160.00

T1 C

L

T1 C

L

L

T1

AT

1

L

T1

AT1

A

L

A

L

Gates can make special designs, angles, bores, etc. Contact Gates Customer Service with your detailed needs.

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



Female Press-Lok® Super to Female Press-Lok® Super - 90° Reference Product Coupling A LDescription Number (in) (mm) (mm)8FSH-8FSH90 7304-6272 1/2 - 1/2 35 65.0012FSH-12FSH90 7304-6273 3/4 - 3/4 40 70.0016FSH-16FSH90 7304-6274 1 -1 55 73.0020FSH-20FSH90 7304-6010 1 1/4 - 1 1/4 70 78.0024FSH-24FSH90 7304-6011 1 1/2 - 1 1/2 82 83.0032FSH-32FSH90 7304-6012 2 - 2 95 88.00

Female Press-Lok® Super Tee Reference Product Coupling A B LDescription Number (in) (mm) (mm) (mm)8-8-8FSHT 7304-6275 1/2 - 1/2 - 1/2 35 35 143.0012-12-12FSHT 7304-6346 3/4 - 3/4 - 3/4 40 40 145.0016-16-16FSHT 7304-6277 1 - 1 - 1 55 55 150.0020-20-20FSHT 7304-6020 1 1/4 - 1 1/4 - 1 1/4 70 70 155.0024-24-20FSHT 7304-6023 1 1/2 - 1 1/2 - 1 1/4 70 82 166.0024-24-24FSHT 7304-6021 1 1/2 - 1 1/2 - 1 1/2 82 82 166.0032-32-20FSHT 7304-6278 2 - 2 - 1 1/4 70 95 176.0032-32-32FSHT 7304-6022 2 - 2 - 2 95 95 176.00

Female Press-Lok® Super to NPTF Solid Male Product A T1 LDescription Number (mm) (in) Thread (mm)8FSH-8MP 7304-6296 35 1/2 1/2 - 14 65.0012FSH-12MP 7304-6297 40 3/4 3/4 - 14 70.0016FSH-16MP 7304-6298 55 1 1 - 11 1/2 80.0020FSH-20MP 7304-6080 70 1 1/4 1 1/4 - 11 1/2 90.0024FSH-24MP 7304-6081 82 1 1/2 1 1/2 - 11 1/2 100.0032FSH-32MP 7304-6082 95 2 2 - 11 1/2 112.00

Female Press-Lok® Super to Female Press-Lok® Super Ball Valve Reference Product Coupling A LDescription Number (in) (mm) (mm)20FSH-20FSHBV 7304-6100 1 1/4 - 1 1/4 70 206.0024FSH-24FSHBV 7304-6101 1 1/2 - 1 1/2 83 250.0032FSH-32FSHBV 7304-6102 2-2 95 259.00

Male Press-Lok® Super Plug Product T1 LDescription Number (in) (mm)8MSH-PLUG 7304-6286 1/2 50.0012MSH-PLUG 7304-6287 3/4 55.0016MSH-PLUG 7304-6288 1 61.0020MSH-PLUG 7304-6050 1 1/4 64.0024MSH-PLUG 7304-6051 1 1/2 70.0032MSH-PLUG 7304-6052 2 70.00

A

L

L

B

L

A

T1

B

A

L

L

A

T1

L


Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts




Male Press-Lok® Super to NPTF Solid Male Product T1 LDescription Number (in) Thread (mm)8MSH-8MP 7304-6289 1/2 1/2 -14 73.0012MSH-12MP 7304-6290 3/4 3/4 -14 85.0016MSH-16MP 7304-6291 1 1 - 11 1/2 90.0020MSH-20MP 7304-6060 1 1/4 1 1/4 - 11 1/2 96.0024MSH-24MP 7304-6061 1 1/2 1 1/2 - 11 1/2 102.0032MSH-32MP 7304-6062 2 2 - 11 1/2 105.00

Male Press-Lok® Super to Male Press-Lok®

Product A B T1 T2 LDescription Number (mm) (mm) (in) (in) (mm)20MSH-24MSA 7304-6320 60 32 1 1/4 1 1/2 100.00

Male Press-Lok® Super to Male Press-Lok® Super Product A B T1 T2 LDescription Number (mm) (mm) (in) (in) (mm)12MSH-12MSH 7304-6344 35 35 3/4 3/4 75.0016MSH-12MSH 7304-6292 40 35 1 3/4 80.0020MSH-12MSH 7304-6069 52 35 1 1/4 3/4 93.0020MSH-16MSH 7304-6293 35 40 1 1/4 1 97.0020MSH-20MSH 7304-6070 52 52 1 1/4 1 1/4 109.0020MSH-24MSH 7304-6073 58 52 1 1/4 1 1/2 115.0020MSH-32MSH 7304-6074 60 52 1 1/4 2 125.0024MSH-20MSH 7304-6075 58 52 1 1/2 1 1/4 115.0024MSH-24MSH 7304-6071 58 58 1 1/2 1 1/2 120.0032MSH-20MSH 7304-6076 60 52 2 1 1/4 125.0032MSH-24MSH 7304-6077 60 58 2 1 1/2 125.0032MSH-32MSH 7304-6072 60 60 2 2 125.00

Female Press-Lok® Super Cap Product A T1 LDescription Number (mm) (in) (mm)8FSH-CAP 7304-6279 35 1/2 65.0012FSH-CAP 7304-6280 40 3/4 70.0016FSH-CAP 7304-6281 55 1 80.0020FSH-CAP 7304-6030 70 1 1/4 90.0024FSH-CAP 7304-6031 82 1 1/2 100.0032FSH-CAP 7304-6032 95 2 100.00

L

T1

BA

T1 T2

L

L

A T1

BA

T1 T2

L


Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Press-Lok® Super Accessories

Staple Reference Product CouplingDescription Number (in)8SHS STAPLE 7304-6087 1/212SHS STAPLE 7304-6088 3/420SHS STAPLE 7304-6090 1 1/424SHS STAPLE 7304-6091 1 1/232SHS STAPLE 7304-6092 2

O-Ring Reference Product CouplingDescription Number (in)8 SHOR O-RING 7304-6113 1/212 SHOR O-RING 7304-6114 3/416 SHOR O-RING 7304-6120 120 SHOR O-RING 7304-6110 1 1/424 SHOR O-RING 7304-6111 1 1/232 SHOR O-RING 7304-6112 2

Back-Up Ring Reference Product CouplingDescription Number (in)8 SHBR BACK-UP RING 7304-6118 1/212 SHBR BACK-UP RING 7304-6119 3/416 SHBR BACK-UP RING 7304-6122 120 SHBR BACK-UP RING 7304-6115 1 1/424 SHBR BACK-UP RING 7304-6116 1 1/232 SHBR BACK-UP RING 7304-6117 2


Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


Press-Lok® Adapters

A

L

L

B

A B

L

Female Press-Lok® to Female Press-Lok®

Reference Product Coupling A LDescription Number (in) (mm) (mm)4FSA-4FSA 7304-5001 1/4 - 1/4 25 58.006FSA-6FSA 7304-5002 3/8 - 3/8 32 32.008FSA-8FSA 7304-5003 1/2 - 1/2 35 35.0010FSA-10FSA 7304-5004 5/8 - 5/8 38 38.0012FSA-12FSA 7304-5005 3/4 - 3/4 44 45.0016FSA-16FSA 7304-5006 1 - 1 55 55.0020FSA-20FSA 7304-5007 1 1/4 - 1 1/4 61 60.0024FSA-24FSA 7304-5280 1 1/2 - 1 1/2 70 70.0032FSA-32FSA 7304-5281 2 - 2 80 80.0040FSA-40FSA 7304-5278 2 1/2 - 2 1/2 100 136.0048FSA-48FSA 7304-5279 3 - 3 120 190.00Meets or exceeds SAE J1467.

Female Press-Lok® to Female Press-Lok® - 90° Reference Product Coupling A B LDescription Number (in) (mm) (mm) (mm)4FSA-4FSA90 7304-5008 1/4 - 1/4 32 37 53.00 6FSA-6FSA90 7304-5009 3/8 - 3/8 32 37 53.00 8FSA-8FSA90 7304-5010 1/2 - 1/2 38 40 59.00 12FSA-12FSA90 7304-5011 3/4 - 3/4 41 42 63.00 16FSA-16FSA90 7304-5012 1 - 1 55 50 80.00 20FSA-20FSA90 7304-5013 1 1/4 - 1 1/4 61 53 84.00 24FSA-24FSA90 7304-5283 1 1/2 - 1 1/2 70 67 102.0032FSA-32FSA90 7304-5259 2 - 2 82 70 114.00Meets or exceeds SAE J1467.

Female Press-Lok® Swivel to Female Press-Lok® Swivel Reference Product Coupling A B LDescription Number (in) (mm) (mm) (mm)4FSAX-4FSAX 7304-5036 1/4 - 1/4 25 25 60.00 6FSAX-4FSAX 7304-5038 3/8 - 1/4 32 25 60.00 6FSAX-6FSAX 7304-5037 3/8 - 3/8 32 32 60.00 8FSAX-6FSAX 7304-5040 1/2 - 3/8 35 32 60.00 8FSAX-8FSAX 7304-5039 1/2 - 1/2 35 35 60.00 12FSAX-8FSAX 7304-5042 3/4 - 1/2 44 35 65.00 12FSAX-12FSAX 7304-5041 3/4 - 3/4 44 44 60.00 16FSAX-12FSAX 7304-5044 1 - 3/4 55 44 70.00 16FSAX-16FSAX 7304-5043 1 - 1 55 55 80.00 20FSAX-20FSAX 7304-5045 1 1/4 - 1 1/4 61 61 80.00Meets or exceeds SAE J1467.

A

L



Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



L

A

A

B

L

A T1

C

B

B

CXX

Y

L

A

Female Press-Lok® Swivel to Female Press-Lok® Swivel - 45° Reference Product Coupling A B LDescription Number (in) (mm) (mm) (mm)4FSAX-4FSAX45 7304-5066 1/4 - 1/4 25 39 45.00 6FSAX-6FSAX45 7304-5067 3/8 - 3/8 32 42 48.00 8FSAX-8FSAX45 7304-5068 1/2 - 1/2 35 42 50.00 12FSAX-12FSAX45 7304-5069 3/4 - 3/4 44 42 53.00 16FSAX-16FSAX45 7304-5070 1 - 1 55 55 68.00 20FSAX-20FSAX45 7304-5071 1 1/4 - 1 1/4 61 61 70.00 Meets or exceeds SAE J1467.

Female Press-Lok® Swivel to Female Press-Lok® Swivel - 90° Reference Product Coupling T1 A B C LDescription Number (in) (in) (mm) (mm) (mm) (mm)4FSAX-4FSAX90 7304-5046 1/4 - 1/4 1/4 25 45 25 58.006FSAX-6FSAX90 7304-5047 3/8 - 3/8 3/8 32 48 32 63.008FSAX-6FSAX90 7304-5049 1/2 - 3/8 1/2 35 50 32 66.008FSAX-8FSAX90 7304-5048 1/2 - 1/2 1/2 35 50 35 66.0012FSAX-12FSAX90 7304-5050 3/4 - 3/4 3/4 44 53 44 72.0016FSAX-16FSAX90 7304-5051 1 - 1 1 55 68 55 93.0020FSAX-20FSAX90 7304-5052 1 1/4 - 1 1/4 1 1/4 61 70 61 99.00Meets or exceeds SAE J1467.

Female Press-Lok® Fixed Tee Reference Product Coupling A B C LDescription Number X-X-Y (in) (mm) (mm) (mm) (mm)4-4-4FSAT 7304-5014 1/4 - 1/4 - 1/4 32 53 37 75.006-6-6FSAT 7304-5015 3/8 - 3/8 - 3/8 32 53 37 73.008-8-6FSAT 7304-5017 1/2 - 1/2 - 3/8 32 59 40 78.008-8-8FSAT 7304-5016 1/2 - 1/2 - 1/2 38 59 40 78.0012-12-6FSAT 7304-5019 3/4 - 3/4 - 3/8 32 63 42 84.0012-12-8FSAT 7304-5020 3/4 - 3/4 - 1/2 38 63 42 84.0012-12-12FSAT 7304-5018 3/4 - 3/4 - 3/4 41 63 42 84.0016-16-6FSAT 7304-5022 1 - 1 - 3/8 32 78 50 100.0016-16-8FSAT 7304-5023 1 - 1 - 1/2 38 78 50 100.0016-16-12FSAT 7304-5024 1 - 1 - 3/4 41 78 50 100.0016-16-16FSAT 7304-5021 1 - 1 - 1 55 78 50 100.0020-20-6FSAT 7304-5026 1 1/4 - 1 1/4 - 3/8 32 84 53 107.0020-20-8FSAT 7304-5027 1 1/4 - 1 1/4 - 1/2 38 84 53 107.0020-20-12FSAT 7304-5028 1 1/4 - 1 1/4 - 3/4 41 84 53 107.0020-20-16FSAT 7304-5029 1 1/4 - 1 1/4 - 1 55 84 53 107.0020-20-20FSAT 7304-5025 1 1/4 - 1 1/4 - 1 1/4 61 84 53 107.0024-24-6FSAT 7304-5430 1 1/2 - 1 1/2 - 3/8 32 102 67 134.0024-24-8FSAT 7304-5431 1 1/2 - 1 1/2 - 1/2 35 102 67 134.0024-24-12FSAT 7304-5432 1 1/2 - 1 1/2 - 3/4 45 102 67 134.0024-24-16FSAT 7304-5433 1 1/2 - 1 1/2 - 1 55 102 67 134.0024-24-20FSAT 7304-5434 1 1/2 - 1 1/2 - 1 1/4 60 102 67 134.0024-24-24FSAT 7304-5285 1 1/2 - 1 1/2 - 1 1/2 70 102 67 134.0032-32-16FSAT 7304-5435 2 - 2 - 1 55 111 70 146.0032-32-20FSAT 7304-5436 2 - 2 - 1 1/4 60 111 70 146.0032-32-24FSAT 7304-5437 2 - 2 - 1 1/2 70 111 70 146.0032-32-32FSAT 7304-5286 2 - 2 - 2 82 111 82 140.0040-40-32FSAT 7304-5438 2 1/2 - 2 1/2 - 2 90 190 145 320.0040-40-40FSAT 7304-5439 2 1/2 - 2 1/2 - 2 1/2 100 210 160 320.0048-48-32FSAT 7304-5440 3 - 3 - 2 90 220 175 360.0048-48-48FSAT 7304-5441 3 - 3 - 3 170 240 180 360.00Meets or exceeds SAE J1467.


Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



A

L

B

L A

L

Female Press-Lok® Swivel Tee Reference Product Coupling A B C LDescription Number X-X-Y (in) (mm) (mm) (mm) (mm)4-4-4FSAXT 7304-5053 1/4 - 1/4 - 1/4 25 25 45 90.006-6-6FSAXT 7304-5054 3/8 - 3/8 - 3/8 32 32 48 86.008-8-6FSAXT 7304-5056 1/2 - 1/2 - 3/8 35 32 50 100.008-8-8FSAXT 7304-5055 1/2 - 1/2 - 1/2 35 35 50 100.008-8-12FSAXT 7304-5057 1/2 - 1/2 - 3/4 35 44 53 106.0012-12-6FSAXT 7304-5059 3/4 - 3/4 - 3/8 44 32 53 84.0012-12-8FSAXT 7304-5060 3/4 - 3/4 - 1/2 44 35 53 84.0012-12-12FSAXT 7304-5058 3/4 - 3/4 - 3/4 44 44 53 84.0012-12-16FSAXT 7304-5344 3/4 - 3/4 - 1 60 60 78 136.0016-8-16FSAXT 7304-5062 1 - 1/2 - 1 55 35 59 136.0016-12-16FSAXT 7304-5063 1 - 3/4 - 1 55 44 59 136.0016-16-6FSAXT 7304-5339 1 - 1 - 3/8 55 32 59 136.0016-16-16FSAXT 7304-5061 1 - 1 - 1 55 55 59 136.0020-10-20FSAXT 7304-5065 1 1/4 - 5/8 - 1 1/4 61 38 53 107.0020-20-6FSAXT 7304-5345 1 1/4 - 1 1/4 - 3/8 60 32 62 140.0020-20-8FSAXT 7304-5346 1 1/4 - 1 1/4 - 1/2 60 35 62 140.0020-20-12FSAXT 7304-5312 1 1/4 - 1 1/4 - 3/4 61 44 62 140.0020-20-16FSAXT 7304-5347 1 1/4 - 1 1/4 - 1 60 60 71 140.0020-20-20FSAXT 7304-5064 1 1/4 - 1 1/4 - 1 1/4 61 61 70 140.00Meets or exceeds SAE J1467.

Male Press-Lok® Adapter to Female Press-Lok® Adapter T Reference Product Coupling LDescription Number (in) (mm)6MSA-6-6FSAT 7304-5367 3/8 - 3/8 - 3/8 84.008MSA-8-8FSAT 7304-5368 1/2 - 1/2 - 1/2 93.00Meets or exceeds SAE J1467.

Female Press-Lok® Y Reference Product Coupling A LDescription Number (in) (mm) (mm)6-6-6FSAY 7304-5030 3/8 - 3/8 - 3/8 62 83.00Meets or exceeds SAE J1467.

Female Press-Lok® Cross Reference Product Coupling A B LDescription Number (in) (mm) (mm) (mm)4-4-4-4FSAC 7304-5685 1/4 - 1/4 - 1/4 - 1/4 32 38 75.006-6-6-6FSAC 7304-5031 3/8 - 3/8 - 3/8 3/8 32 38 75.008-8-8-8FSAC 7304-5032 1/2 - 1/2 - 1/2 - 1/2 38 40 80.0012-12-12-12FSAC 7304-5033 3/4 - 3/4 - 3/4 - 3/4 41 40 80.0016-16-16-16FSAC 7304-5034 1 - 1 - 1 - 1 55 50 100.0020-20-20-20FSAC 7304-5035 1 1/4 - 1 1/4 - 1 1/4 - 1 1/4 61 53 106.00Meets or exceeds SAE J1467.

L



CXX

Y

L

A

B

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



A

L

T1

L

A B

L

A T1

B

T1

B

A

L

Female Press-Lok® K Configuration Reference Product Coupling A LDescription Number (in) (mm) (mm)6-6-6-6FSAK 7304-5184 3/8 - 3/8 - 3/8 - 3/8 63 110.00Meets or exceeds SAE J1467.Larger K sizes available. Contact Customer Service.

Female Press-Lok® Swivel to Female British Standard Pipe Parallel - 45° Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)4FSAX-4FBSPPX45 7304-5394 25 27 1/4 1/4-19 37.006FSAX-6FBSPPX45 7304-5395 32 29 3/8 3/8-19 37.008FSAX-8FBSPPX45 7304-5396 35 33 1/2 1/2-14 37.00

Meets or exceeds SAE J1467.

Female Press-Lok® Swivel to Female British Standard Pipe Parallel - 90° Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)4FSAX-4FBSPPX90 7304-5397 25 43 1/4 1/4-19 31.006FSAX-6FBSPPX90 7304-5398 32 42 3/8 3/8-19 35.008FSAX-8FBSPPX90 7304-5399 35 45 1/2 1/2-14 40.0012FSAX-12FBSPPX90 7304-5650 45 58 3/4 3/4-14 58.0016FSAX-16FBSPPX90 7304-5651 60 65 1 1-11 67.0020FSAX-20FBSPPX90 7304-5652 60 68 1 1/4 1 1/4-11 72.00Meets or exceeds SAE J1467.

Female Press-Lok® Swivel to NPTF Solid Male Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)4FSAX-2MP 7304-5356 25 15 1/4 1/8-27 51.004FSAX-4MP 7304-5094 25 15 1/4 1/4-18 51.004FSAX-6MP 7304-5095 25 15 1/4 3/8-18 51.006FSAX-2MP 7304-5640 32 15 3/8 1/8-27 51.006FSAX-4MP 7304-5313 32 15 3/8 1/4-18 51.006FSAX-6MP 7304-5096 32 15 3/8 3/8-18 51.006FSAX-8MP 7304-5097 32 19 3/8 1/2-14 56.008FSAX-6MP 7304-5098 35 15 1/2 3/8-18 54.008FSAX-8MP 7304-5099 35 19 1/2 1/2-14 58.008FSAX-12MP 7304-5314 35 19 1/2 3/4-14 58.0012FSAX-8MP 7304-5315 44 19 3/4 1/2-14 60.0012FSAX-12MP 7304-5100 44 19 3/4 3/4-14 60.0012FSAX-16MP 7304-5357 44 24 3/4 1-11 1/2 65.0016FSAX-12MP 7304-5359 55 19 1 3/4-14 76.0016FSAX-16MP 7304-5101 55 24 1 1-11 1/2 81.0016FSAX-20MP 7304-5641 55 25 1 1 1/4-11 1/2 82.0016FSAX-24MP 7304-5642 55 26 1 1 1/2-11 1/2 82.0020FSAX-16MP 7304-5643 61 24 1 1/4 1-11 1/2 81.0020FSAX-20MP 7304-5102 61 25 1 1/4 1 1/4-11 1/2 82.00Meets or exceeds SAE J1467.


Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



L

A T1

B

Female Press-Lok® to NPTF Solid Male Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)24FSA-24MP 7304-5338 80 25.4 1 1/2 1 1/2-11 1/2 74.90 32FSA-32MP 7304-5337 80 25.4 2 2-11 1/2 74.90 Meets or exceeds SAE J1467.

Female Press-Lok® Swivel to NPTF Solid Male - 45° Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)4FSAX-4MP45 7304-5127 25 28 1/4 1/4-18 45.00 6FSAX-6MP45 7304-5128 32 30 3/8 3/8-18 48.00 6FSAX-8MP45 7304-5129 32 32 3/8 1/2-14 48.00 8FSAX-6MP45 7304-5130 35 32 1/2 3/8-18 50.00 8FSAX-8MP45 7304-5131 35 34 1/2 1/2-14 50.00 8FSAX-12MP45 7304-5132 35 33 1/2 3/4-14 50.00 12FSAX-12MP45 7304-5133 44 38 3/4 3/4-14 53.00 16FSAX-16MP45 7304-5134 55 50 1 1-11 1/2 68.00 20FSAX-20MP45 7304-5135 61 57 1 1/4 1 1/4-11 1/2 67.00Meets or exceeds SAE J1467.

Female Press-Lok® Swivel to NPTF Solid Male - 90° Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)4FSAX-4MP90 7304-5316 25 31 1/4 1/4-18 44.00 4FSAX-6MP90 7304-5387 25 31 1/4 3/8-18 44.00 6FSAX-6MP90 7304-5109 32 34 3/8 3/8-18 44.00 6FSAX-8MP90 7304-5110 32 38 3/8 1/2-14 44.00 8FSAX-8MP90 7304-5112 35 40 1/2 1/2-14 48.00 8FSAX-12MP90 7304-5113 35 41 1/2 3/4-14 48.00 8FSAX-16MP90 7304-5111 35 36 1/2 1-18 50.00 12FSAX-8MP90 7304-5258 44 44 3/4 1/2-14 57.00 12FSAX-12MP90 7304-5114 44 44 3/4 3/4-14 57.00 16FSAX-12MP90 7304-5358 55 58 1 3/4-14 67.00 16FSAX-16MP90 7304-5115 55 58 1 1-11 1/2 67.00 20FSAX-20MP90 7304-5116 61 67 1 1/4 1 1/4-11 1/2 67.00 Meets or exceeds SAE J1467.

Female Press-Lok® Swivel to NPTF Solid Male - 90° Long Drop Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)4FSAX-4MP90L 7304-5317 25 51 1/4 1/4-18 45.00 6FSAX-6MP90L 7304-5318 32 45 3/8 3/8-18 48.00 8FSAX-8MP90L 7304-5319 35 48 1/2 1/2-14 48.00 12FSAX-12MP90L 7304-5320 44 64 3/4 3/4-14 53.00Meets or exceeds SAE J1467.



T1

B

A

L

T1

L

AB

L

A T1

B

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



B

L

A T1

T1

L

AB

Female Press-Lok® Swivel to Male O-Ring Boss Solid Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)4FSAX-4MB 7304-5083 25 13 1/4 7/16-20 49.00 4FSAX-5MB 7304-5369 25 13 1/4 1/2-20 49.00 4FSAX-6MB 7304-5084 25 13 1/4 9/16-18 49.00 6FSAX-4MB 7304-5370 32 13 3/8 7/16-20 49.00 6FSAX-6MB 7304-5085 32 13 3/8 9/16-18 49.00 6FSAX-8MB 7304-5086 32 15 3/8 3/4-16 54.00 8FSAX-6MB 7304-5087 35 13 1/2 9/16-18 52.00 8FSAX-8MB 7304-5088 35 15 1/2 3/4-16 54.00 8FSAX-10MB 7304-5089 35 16 1/2 7/8-14 57.00 8FSAX-12MB 7304-5375 35 18 1/2 1 1/6-12 59.00 12FSAX-10MB 7304-5371 44 16 3/4 7/8-14 57.00 12FSAX-12MB 7304-5090 44 18 3/4 1 1/16-12 57.00 12FSAX-16MB 7304-5091 44 20 3/4 1 5/16-12 59.00 12FSAX-20MB 7304-5372 44 20 3/4 1 5/8-12 59.00 12FSAX-24MB 7304-5373 44 23 3/4 1 7/8-12 62.00 16FSAX-12MB 7304-5260 60 18 1 1 1/16-12 74.00 16FSAX-16MB 7304-5092 60 20 1 1 5/16-12 76.00 20FSAX-16MB 7304-5374 60 20 1 1/4 1 5/16-12 73.00 20FSAX-20MB 7304-5093 60 20 1 1/4 1 5/8-12 73.00 24FSAX-24MB 7304-5376 80 23 1 1/2 1 7/8-12 85.00 32FSAX-32MB 7304-5377 80 23 2 2 1/2-12 80.00Meets or exceeds SAE J1467.

Female Press-Lok® Swivel to Male O-Ring Boss Solid - 45° Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)4FSAX-4MB45 7304-5117 25 30 1/4 7/16-20 45.00 4FSAX-6MB45 7304-5118 25 34 1/4 9/16-18 45.00 6FSAX-4MB45 7304-5361 32 32 3/8 7/16-20 48.00 6FSAX-6MB45 7304-5119 32 35 3/8 9/16-18 48.00 6FSAX-8MB45 7304-5120 32 35 3/8 3/4-16 48.00 8FSAX-6MB45 7304-5121 35 38 1/2 9/16-18 50.00 8FSAX-8MB45 7304-5122 35 38 1/2 3/4-16 50.00 8FSAX-10MB45 7304-5123 35 40 1/2 7/8-14 50.00 8FSAX-12MB45 7304-5362 35 46 1/2 1 1/16-12 50.00 12FSAX-12MB45 7304-5124 45 45 3/4 1 1/16-12 53.00 16FSAX-16MB45 7304-5125 60 53 1 1 5/16-12 68.00 20FSAX-20MB45 7304-5126 60 52 1 1/4 1 5/8-12 67.00Meets or exceeds SAE J1467.


Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



Female Press-Lok® Swivel to Male O-Ring Boss Solid - 90° Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)4FSAX-4MB90 7304-5103 25 32 1/4 7/16-20 45.00 4FSAX-6MB90 7304-5256 25 36 1/4 9/16-18 45.00 6FSAX-4MB90 7304-5254 32 34 3/8 7/16-20 48.00 6FSAX-6MB90 7304-5104 32 38 3/8 9/16-18 48.00 6FSAX-8MB90 7304-5105 32 40 3/8 3/4-16 48.00 8FSAX-6MB90 7304-5255 35 40 1/2 9/16-18 50.00 8FSAX-8MB90 7304-5106 35 42 1/2 3/4-16 50.00 8FSAX-10MB90 7304-5257 35 46 1/2 7/8-14 50.00 8FSAX-12MB90 7304-5261 35 51 1/2 1 1/16-12 50.00 12FSAX-12MB90 7304-5107 45 54 3/4 1 1/16-12 53.00 16FSAX-16MB90 7304-5108 60 61 1 1 5/16-12 68.00 20FSAX-20MB90 7304-5265 60 65 1 1/4 1 5/8-12 67.00Meets or exceeds SAE J1467.

Female Press-Lok® Swivel to Male British Standard Pipe Parallel Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)4FSAX-4MBSPP 7304-5072 25 9 1/4 1/4-19 45.50 4FSAX-6MBSPP 7304-5365 25 10 1/4 3/8-19 45.50 6FSAX-4MBSPP 7304-5605 32 12 3/8 1/4-19 51.00 6FSAX-6MBSPP 7304-5073 32 10 3/8 3/8-19 47.00 6FSAX-8MBSPP 7304-5074 32 13 3/8 1/2-14 52.00 8FSAX-6MBSPP 7304-5075 35 10 1/2 3/8-19 49.50 8FSAX-8MBSPP 7304-5076 35 13 1/2 1/2-14 52.50 8FSAX-10MBSPP 7304-5606 35 16 1/2 5/8-14 56.00 8FSAX-12MBSPP 7304-5391 35 14 1/2 3/4-14 56.00 8FSAX-16MBSPP 7304-5393 35 17 1/2 1-11 58.00 10FSAX-10MBSPP 7304-5600 38 16 5/8 5/8-14 56.00 12FSAX-8MBSPP 7304-5392 45 13 3/4 1/2-14 56.00 12FSAX-12MBSPP 7304-5077 45 14 3/4 3/4-14 56.00 12FSAX-16MBSPP 7304-5078 45 16.5 3/4 1-11 56.00 16FSAX-12MBSPP 7304-5079 60 14 1 3/4-14 72.00 16FSAX-16MBSPP 7304-5080 60 16.5 1 1-11 72.50 16FSAX-20MBSPP 7304-5607 55 20 1 1 1/4-11 69.00 20FSAX-16MBSPP 7304-5081 60 16.5 1 1/4 1-11 76.00 20FSAX-20MBSPP 7304-5082 60 19 1 1/4 1 1/4-11 76.00 20FSAX-24MBSPP 7304-5608 55 22 1 1/4 1 1/2-11 71.00Meets or exceeds SAE J1467.

Female Press-Lok® Swivel to Male British Standard Pipe Parallel - 45° Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)6FSAX-6MBSPP45 7304-5388 32 28 3/8 3/8-19 68.00 8FSAX-8MBSPP45 7304-5389 35 33 1/2 1/2-14 73.00 16FSAX-16MBSPP45 7304-5390 55 46 1 1-11 100.00Meets or exceeds SAE J1467.



B

L

A T1

T1

L

A B

L

A T1

B

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



B

L

A T1

L

A T1

BC

BOLTSIZE

Female Press-Lok® Swivel to Male British Standard Pipe Parallel - 90° Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)12FSAX-12MBSPP90 7304-5403 44 48 3/4 3/4-14 53.00 Meets or exceeds SAE J1467.

Female Press-Lok® Swivel to Male BSP O-Ring Product A B T1 LDescription Number (mm) (mm) (in) Thread (mm)4FSAX-4MBSPPOR 7304-5660 25 15 1/4 1/4-19 51.00 6FSAX-6MBSPPOR 7304-5661 32 17 3/8 7/16-20 53.00 6FSAX-8MBSPPOR 7304-5662 32 19 3/8 1/2-14 58.00 8FSAX-6MBSPPOR 7304-5663 35 17 1/2 7/16-20 56.00 8FSAX-8MBSPPOR 7304-5664 35 19 1/2 1/2-14 58.00 8FSAX-12MBSPPOR 7304-5665 35 24 1/2 3/4-14 67.00 8FSAX-16MBSPPOR 7304-5666 35 26 1/2 9/16-18 72.00 12FSAX-8MBSPPOR 7304-5667 45 19 3/4 1/2-14 66.00 12FSAX-12MBSPPOR 7304-5668 45 24 3/4 3/4-14 66.00 12FSAX-16MBSPPOR 7304-5669 45 26 3/4 1-11 72.00 16FSAX-12MBSPPOR 7304-5670 60 24 1 3/4-14 81.00 16FSAX-16MBSPPOR 7304-5671 60 26 1 1-11 81.00 16FSAX-20MBSPPOR 7304-5672 60 26 1 1 1/4-11 85.00 20FSAX-16MBSPPOR 7304-5673 60 26 1 1/4 1-11 82.00 20FSAX-20MBSPPOR 7304-5674 60 26 1 1/4 1 1/4-11 82.00Meets or exceeds SAE J1467.

Female Press-Lok® Swivel to Female Banjo Fitting Product A B C T1 L BoltDescription Number (mm) (mm) (mm) (in) (mm) Size4FSAX-4BJ 7304-5402 25 14 22 1/4 40.00 1/4 BSP6FSAX-6BJ 7304-5220 32 16.5 29 3/8 44.00 3/8 BSP8FSAX-6BJ 7304-5620 35 17.5 29 1/2 45.00 3/8 BSP8FSAX-8BJ 7304-5221 35 17.5 32 1/2 47.00 1/2 BSP12FSAX-12BJ 7304-5622 45 24 44.5 3/4 52.00 3/4 BSP16FSAX-16BJ 7304-5623 60 30 51 1 96.00 1 BSP20FSAX-20BJ 7304-5624 60 32 63.5 1 1/4 96.00 1 1/4 BSPMeets or exceeds SAE J1467.

Press-Lok® Banjo Washer Reference Product CouplingDescription Number (in)4BW 7304-5401 1/46BW 7304-5224 3/88BW 7304-5225 1/2Meets or exceeds SAE J1467.


L

A T1

B

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



Press-Lok® Banjo Bolt BSP Thread Product LDescription Number Thread (mm)4BB 7304-5400 1/4-19 36.006BB 7304-5222 3/8-19 40.008BB 7304-5223 1/2-14 50.0012BB 7304-5406 3/4-14 64.0016BB 7304-5407 1-11 75.0020BB 7304-5408 1 1/4-11 90.00Meets or exceeds SAE J1467.

Male Press-Lok® to Female Press-Lok®

Product A T1 LDescription Number (mm) (in) (mm)16MSA-12FSA 7304-6341 60 1 72.00Meets or exceeds SAE J1467.

Male Press-Lok® to Female Press-Lok® - 45° Product A T1 LDescription Number (mm) (in) (mm)6MSA-6FSA45 7304-6336 32 3/8 37.008MSA-8FSA45 7304-6337 35 1/2 37.0012MSA-12FSA45 7304-6339 45 3/4 44.00Meets or exceeds SAE J1467.

Male Press-Lok® to Female Press-Lok® - 90° Product A T1 T2 LDescription Number (mm) (in) (in) (mm)6MSA-6FSA90 7304-5276 30 3/8 3/8 47.008MSA-8FSA90 7304-6338 35 1/2 1/2 51.0012MSA-12FSA90 7304-6340 45 3/4 3/4 56.00Meets or exceeds SAE J1467.

Male Press-Lok® to Female Press-Lok® to Female Press-Lok®

Product A T1 LDescription Number (mm) (in) (mm)16MSA-16FSA-6FSA 7304-5688 55 1 41.00Meets or exceeds SAE J1467.



L

T1

AT2

L

T1 AT1

L

T1

AT

1

L

T1

AT1

AT1

L

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



L

A

T1

T2

Male Press-Lok® to Female Press-Lok® Swivel Product A T1 T2 LDescription Number (mm) (in) (in) (mm)4MSA-4FSAX 7304-5560 25 1/4 1/4 65.004MSA-6FSAX 7304-5561 32 1/4 3/8 65.004MSA-8FSAX 7304-5562 35 1/4 1/2 65.006MSA-4FSAX 7304-5329 25 3/8 1/4 65.006MSA-6FSAX 7304-5563 32 3/8 3/8 65.006MSA-8FSAX 7304-5564 35 3/8 1/2 60.006MSA-12FSAX 7304-5573 45 3/8 3/4 60.006MSA-20FSAX 7304-5574 32 3/8 1 1/4 78.008MSA-4FSAX 7304-5349 25 1/2 1/4 65.008MSA-6FSAX 7304-5330 32 1/2 3/8 65.008MSA-8FSAX 7304-5385 35 1/2 1/2 60.008MSA-12FSAX 7304-5576 45 1/2 3/4 60.008MSA-16FSAX 7304-5577 35 1/2 1 72.008MSA-20FSAX 7304-5578 35 1/2 1 1/4 78.0012MSA-6FSAX 7304-5579 32 3/4 3/8 70.0012MSA-8FSAX 7304-5331 36 3/4 1/2 65.0012MSA-12FSAX 7304-5554 45 3/4 3/4 70.0012MSA-16FSAX 7304-5555 60 3/4 1 72.0012MSA-20FSAX 7304-5556 60 3/4 1 1/4 78.0016MSA-12FSAX 7304-5332 45 1 3/4 72.0016MSA-16FSAX 7304-5557 60 1 1 72.0016MSA-20FSAX 7304-5558 60 1 1 1/4 86.0016MSA-24FSAX 7304-5559 60 1 1 1/2 90.0016MSA-32FSAX 7304-5551 60 1 2 90.0020MSA-12FSAX 7304-5333 45 1 1/4 3/4 78.0020MSA-16FSAX 7304-5334 61 1 1/4 1 78.0020MSA-20FSAX 7304-5552 61 1 1/4 1 1/4 78.0020MSA-24FSAX 7304-5565 61 1 1/4 1 1/2 90.0020MSA-32FSAX 7304-5553 61 1 1/4 2 90.0024MSA-16FSAX 7304-5567 61 1 1/2 1 90.0024MSA-20FSAX 7304-5568 70 1 1/2 1 1/4 90.0024MSA-24FSAX 7304-5566 70 1 1/2 1 1/2 90.0024MSA-32FSAX 7304-5550 70 1 1/2 2 90.0032MSA-16FSAX 7304-5570 61 2 1 90.0032MSA-20FSAX 7304-5571 70 2 1 1/4 90.0032MSA-24FSAX 7304-5572 70 2 1 1/2 90.0032MSA-32FSAX 7304-5569 70 2 2 90.00Meets or exceeds SAE J1467.

Male Press-Lok® to Female Press-Lok® Swivel - 45° Product A T1 T2 LDescription Number (mm) (in) (in) (mm)4MSA-4FSAX45 7304-6264 25 1/4 1/4 37.006MSA-4FSAX45 7304-5336 32 3/8 1/4 37.006MSA-6FSAX45 7304-5583 32 3/8 3/8 37.008MSA-6FSAX45 7304-5582 35 1/2 3/8 37.008MSA-8FSAX45 7304-5581 35 1/2 1/2 37.008MSA-12FSAX45 7304-6265 35 1/2 3/4 37.0012MSA-12FSAX45 7304-5584 45 3/4 3/4 43.0016MSA-16FSAX45 7304-5585 60 1 1 52.0020MSA-20FSAX45 7304-5587 60 1 1/4 1 1/4 52.00Meets or exceeds SAE J1467.


AT1 T2

L

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



Male Press-Lok® to Female Press-Lok® Swivel - 90° Product A B T1 T2 LDescription Number (mm) (mm) (in) (in) (mm)4MSA-4FSAX90 7304-5177 25 43 1/4 1/4 45.004MSA-6FSAX90 7304-5586 32 43 1/4 3/8 45.004MSA-8FSAX90 7304-5589 35 50 1/4 1/2 48.006MSA-4FSAX90 7304-5310 25 45 3/8 1/4 46.006MSA-6FSAX90 7304-5178 32 42 3/8 3/8 45.006MSA-8FSAX90 7304-5335 35 50 3/8 1/2 50.008MSA-4FSAX90 7304-5590 25 47 1/2 1/4 50.008MSA-6FSAX90 7304-5591 32 48 1/2 3/8 50.008MSA-8FSAX90 7304-5179 35 45 1/2 1/2 50.008MSA-12FSAX90 7304-5592 44 53 1/2 3/4 55.0010MSA-10FSAX90 7304-5180 38 51 5/8 5/8 53.0012MSA-8FSAX90 7304-5593 35 52 3/4 1/2 54.0012MSA-12FSAX90 7304-5181 44 53 3/4 3/4 55.0012MSA-16FSAX90 7304-5594 60 68 3/4 1 62.0012MSA-20FSAX90 7304-5595 60 72 3/4 1 1/4 66.0016MSA-12FSAX90 7304-5405 44 56 1 3/4 69.0016MSA-16FSAX90 7304-5182 60 66 1 1 65.0016MSA-20FSAX90 7304-5596 60 70 1 1 1/4 75.0020MSA-12FSAX90 7304-5597 45 59 1 1/4 3/4 73.0020MSA-16FSAX90 7304-5598 60 68 1 1/4 1 73.0020MSA-20FSAX90 7304-5183 60 66 1 1/4 1 1/4 67.0024MSA-24FSA90 7304-5308 80 85 1 1/2 1 1/2 85.0032MSA-32FSA90 7304-5309 80 95 2 2 95.00Meets or exceeds SAE J1467.

Male Press-Lok® to Male Press-Lok®

Product A B T1 T2 LDescription Number (mm) (mm) (in) (in) (mm)4MSA-4MSA 7304-5136 26 26 1/4 1/4 56.006MSA-4MSA 7304-5321 26 26 3/8 1/4 56.006MSA-6MSA 7304-5137 26 26 3/8 3/8 56.006MSA-6MSA-72 7304-6347 26 26 3/8 3/8 72.008MSA-4MSA 7304-5322 26 26 1/2 1/4 56.008MSA-6MSA 7304-5143 26 26 1/2 3/8 56.008MSA-8MSA 7304-5138 26 26 1/2 1/2 56.0010MSA-4MSA 7304-5323 26 26 5/8 1/4 56.0010MSA-10MSA 7304-5139 26 26 5/8 5/8 56.0012MSA-6MSA 7304-5324 26 26 3/4 3/8 56.0012MSA-8MSA 7304-5325 26 26 3/4 1/2 56.0012MSA-12MSA 7304-5140 26 26 3/4 3/4 56.0016MSA-8MSA 7304-5326 32 26 1 1/2 61.0016MSA-10MSA 7304-5144 32 26 1 5/8 62.0016MSA-12MSA 7304-5145 32 26 1 3/4 61.0016MSA-16MSA 7304-5141 32 32 1 1 66.0020MSA-12MSA 7304-5327 32 26 1 1/4 3/4 61.0020MSA-16MSA 7304-5146 32 32 1 1/4 1 66.0020MSA-20MSA 7304-5142 32 32 1 1/4 1 1/4 66.0024MSA-8MSA 7304-6267 36 26 1 1/2 1/2 70.0024MSA-12MSA 7304-6268 36 26 1 1/2 3/4 70.0024MSA-16MSA 7304-6305 36 32 1 1/2 1 76.0024MSA-20MSA 7304-5380 36 36 1 1/2 1 1/4 74.0024MSA-24MSA 7304-5288 36 36 1 1/2 1 1/2 78.0032MSA-16MSA 7304-6266 36 32 2 1 76.0032MSA-24MSA 7304-5290 36 36 2 1 1/2 78.0032MSA-32MSA 7304-5289 36 36 2 2 78.0040MSA-40MSA 7304-5287 65 65 2 1/2 2 1/2 140.0048MSA-48MSA 7304-5291 70 3 3 3 150.00Meets or exceeds SAE J1467.



B

L

T1

AT2

BA

T1 T2

L

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



T1

L

A

Male Press-Lok® to NPTF Solid Male Product A T1 LDescription Number (mm) (in) Thread (mm)4MSA-2MP 7304-5540 10 1/4 1/8-27 53.004MSA-4MP 7304-5153 15 1/4 1/4-18 53.004MSA-6MP 7304-5303 15 1/4 3/8-18 53.004MSA-12MP 7304-2541 19 1/4 3/4-14 58.006MSA-2MP 7304-5542 10 3/8 1/8-27 53.006MSA-4MP 7304-5154 15 3/8 1/4-18 53.006MSA-6MP 7304-5155 15 3/8 3/8-18 53.006MSA-8MP 7304-5156 19 3/8 1/2-14 53.006MSA-12MP 7304-5543 19 3/8 3/4-14 58.008MSA-4MP 7304-5544 15 1/2 1/4-18 58.008MSA-6MP 7304-5157 15 1/2 3/8-18 60.008MSA-8MP 7304-5158 19 1/2 1/2-14 60.008MSA-12MP 7304-5159 19 1/2 3/4-14 60.008MSA-16MP 7304-5545 24 1/2 1-11 1/2 60.0012MSA-6MP 7304-5546 15 3/4 3/8-18 64.0012MSA-8MP 7304-5547 19 3/4 1/2-14 64.0012MSA-12MP 7304-5160 19 3/4 3/4-14 64.0012MSA-16MP 7304-5161 24 3/4 1-11 1/2 70.0016MSA-12MP 7304-5306 19 1 3/4-14 74.0016MSA-16MP 7304-5162 24 1 1-11 1/2 79.0016MSA-20MP 7304-5548 25 1 1 1/4-11 1/2 79.0020MSA-20MP 7304-5163 25 1 1/4 1 1/4-11 1/2 79.0020MSA-24MP 7304-5531 26 1 1/4 1 1/2-11 1/2 80.0024MSA-20MP 7304-5549 25 1 1/2 1 1/4-11 1/2 79.0024MSA-24MP 7304-5301 26 1 1/2 1 1/2-11 1/2 80.0032MSA-32MP 7304-5302 26 2 2-11 1/2 80.00Meets or exceeds SAE J1467.

Male Press-Lok® to Male O-Ring Boss Solid Product A T1 LDescription Number (mm) (in) Thread (mm)4MSA-4MB 7304-5352 13 1/4 7/16-20 52.004MSA-5MB 7304-5453 13 1/4 1/2-20 52.004MSA-6MB 7304-5353 13 1/4 9/16-18 52.006MSA-4MB 7304-5168 13 3/8 7/16-20 53.006MSA-6MB 7304-5169 13 3/8 9/16-18 53.006MSA-8MB 7304-5170 15 3/8 3/4-16 53.006MSA-10MB 7304-5454 16 3/8 7/8-14 53.006MSA-12MB 7304-5455 19 3/8 1 1/16-12 59.008MSA-6MB 7304-5171 13 1/2 9/16-18 56.008MSA-8MB 7304-5172 15 1/2 3/4-16 56.008MSA-10MB 7304-5173 16 1/2 7/8-14 56.008MSA-12MB 7304-5174 19 1/2 1 1/16-12 59.008MSA-16MB 7304-5456 20 1/2 1 5/16-12 59.0012MSA-8MB 7304-5457 15 3/4 3/4-16 60.0012MSA-10MB 7304-5458 16 3/4 7/8-14 60.0012MSA-12MB 7304-5175 19 3/4 1 1/16-12 60.0012MSA-16MB 7304-5459 20 3/4 1 5/16-12 60.0016MSA-12MB 7304-5460 19 1 1 1/16-12 74.0016MSA-16MB 7304-5176 20 1 1 5/16-12 74.0016MSA-20MB 7304-5461 20 1 1 5/8-12 79.0020MSA-20MB 7304-5462 20 1 1/4 1 5/8-12 79.00Meets or exceeds SAE J1467.


L

T1

A

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



Male Press-Lok® to Male British Standard Pipe Parallel Product A T1 LDescription Number (mm) (in) Thread (mm)4MSA-4MBSPP 7304-5340 9 1/4 1/4-19 51.004MSA-6MBSPP 7304-5341 10 1/4 3/8-19 51.006MSA-4MBSPP 7304-5500 9 3/8 1/4-19 50.006MSA-6MBSPP 7304-5164 10 3/8 3/8-19 50.006MSA-8MBSPP 7304-5501 13 3/8 1/2-14 50.008MSA-6MBSPP 7304-5404 10 1/2 3/8-19 50.008MSA-8MBSPP 7304-5165 13 1/2 1/2-14 55.008MSA-12MBSPP 7304-5502 14 1/2 3/4-14 58.008MSA-16MBSPP 7304-5503 17 1/2 1-11 62.0012MSA-10MBSPP 7304-5504 13 3/4 5/8-14 58.0012MSA-12MBSPP 7304-5166 14 3/4 3/4-14 58.0012MSA-16MBSP P 7304-5505 17 3/4 1-11 62.0016MSA-12MBSPP 7304-5506 14 1 3/4-14 72.0016MSA-16MBSPP 7304-5167 17 1 1-11 72.0016MSA-20MBSPP 7304-5507 19 1 1 1/4-11 79.0020MSA-20MBSPP 7304-5508 19 1 1/4 1 1/4-11 79.0020MSA-24MBSPP 7304-5509 20 1 1/4 1 1/2-11 79.0024MSA-24MBSPP 7304-5510 23 1 1/2 1 1/2-11 82.0032MSA-32MBSPP 7304-5511 23 2 2-11 82.00Meets or exceeds SAE J1467.

Female Press-Lok® Cap Product A T1 LDescription Number (mm) (in) (mm)4FSA 7304-5185 25 1/4 35.006FSA 7304-5186 30 3/8 38.008FSA 7304-5187 35 1/2 38.0012FSA 7304-5188 40 3/4 40.0016FSA 7304-5189 55 1 50.0020FSA 7304-5190 60 1 1/4 50.0024FSA 7304-5298 70 1 1/2 80.0032FSA 7304-5299 80 2 80.0040FSA 7304-5297 100 2 1/2 120.0048FSA 7304-5300 120 3 140.00Meets or exceeds SAE J1467.

Male Press-Lok® Plug Product A T1 LDescription Number (mm) (in) (mm)4MSA 7304-5147 26 1/4 34.006MSA 7304-5148 26 3/8 34.008MSA 7304-5149 26 1/2 34.0010MSA 7304-5328 26 5/8 34.0012MSA 7304-5150 26 3/4 34.0016MSA 7304-5151 32 1 41.0020MSA 7304-5152 32 1 1/4 41.0024MSA 7304-5304 36 1 1/2 44.0032MSA 7304-5305 36 2 44.0040MSA 7304-5307 72 2 1/2 80.0048MSA 7304-5311 102 3 110.00Meets or exceeds SAE J1467.


T1

L

A

L

A T1

T1

L

A


Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



Male Press-Lok® to Female Ball Valve Adapter Reference Product Coupling A LDescription Number (in) (mm) (mm)4MS-4FSXBV 7304-5227 1/4 - 1/4 25 106.006MS-6FSXBV 7304-5228 3/8 - 3/8 30 113.008MS-8FSXBV 7304-5229 1/2 - 1/2 32 118.0012MS-12FSXBV 7304-5230 3/4 - 3/4 40 135.0016MS-16FSXBV 7304-5231 1 - 1 55 151.0020MS-20FSXBV 7304-5232 1 1/4 - 1 1/4 60 165.0024MS-24FSXBV 7304-5292 1 1/2 - 1 1/2 70 217.0032MS-32FSXBV 7304-5293 2 - 2 80 218.00Meets or exceeds SAE J1467.T handle to 1", single arm crank 1 ¼" and above as shown in illustration.

Female Press-Lok® Ball Valve to Female Ball Valve Adapter Reference Product Coupling A LDescription Number (in) (mm) (mm)4FSX-4FSXBV 7304-5234 1/4 - 1/4 25 106.006FSX-6FSXBV 7304-5235 3/8 - 3/8 30 113.008FSX-8FSXBV 7304-5236 1/2 - 1/2 32 118.0012FSX-12FSXBV 7304-5237 3/4 - 3/4 40 138.0016FSX-16FSXBV 7304-5238 1 - 1 55 151.0020FSX-20FSXBV 7304-5239 1 1/4 - 1 1/4 60 166.0024FSX-24FSXBV 7304-5295 1 1/2 - 1 1/2 70 223.0032FSX-32FSXBV 7304-5296 2 - 2 80 238.00Meets or exceeds SAE J1467.T handle to 1", single arm crank 1 ¼" and above as shown in illustration.

L

A

L

A


Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


Press-Lok® Accessories

Staple - Carbon Steel Reference Product CouplingDescription Number (in)4SS STAPLE 7304-5191 1/4 6SS STAPLE 7304-5192 3/8 8SS STAPLE 7304-5193 1/2 10SS STAPLE 7304-5194 5/8 12SS STAPLE 7304-5195 3/4 16SS STAPLE 7304-5196 1 20SS STAPLE 7304-5197 1 1/4 24SS STAPLE 7304-5269 1 1/2 32SS STAPLE 7304-5270 2 40SS STAPLE 7304-5271 2 1/248SS STAPLE 7304-5272 3For static pressure applications.

Staple - Stainless Steel Reference Product CouplingDescription Number (in)4SSS STAPLE 7304-5211 1/4 6SSS STAPLE 7304-5212 3/8 8SSS STAPLE 7304-5213 1/2 10SSS STAPLE 7304-5214 5/8 12SSS STAPLE 7304-5215 3/4 16SSS STAPLE 7304-5216 1 20SSS STAPLE 7304-5217 1 1/4 24SSS STAPLE 7304-5273 1 1/2 32SSS STAPLE 7304-5274 2 For impulse pressure applications.

O-Ring Reference Product CouplingDescription Number (in)4SOR O-RING 7304-5205 1/4 6SOR O-RING 7304-5206 3/8 8SOR O-RING 7304-5207 1/2 10SOR O-RING 7304-5208 5/8 12SOR O-RING 7304-5209 3/4 16SOR O-RING 7304-5210 1 20SOR O-RING 7304-5218 1 1/4 24SOR O-RING 7304-5262 1 1/2 32SOR O-RING 7304-5263 2

Back-Up Ring Reference Product CouplingDescription Number (in)4SBR BACK-UP RG 7304-5198 1/4 6SBR BACK-UP RG 7304-5199 3/8 8SBR BACK-UP RG 7304-5200 1/2 10SBR BACK-UP RG 7304-5201 5/8 12SBR BACK-UP RG 7304-5202 3/4 16SBR BACK-UP RG 7304-5203 1 20SBR BACK-UP RG 7304-5204 1 1/4 24SBR BACK-UP RG 7304-5266 1 1/2 32SBR BACK-UP RG 7304-5267 2


Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Press-Lok® Low Profile Adapters and Accessories

Press-Lok® Low Profile Male to NPTF Solid Male Product B C LDescription Number (mm) (mm) (mm)24PLLM-24MP 7304-6245 25.4 51.5 99.25

Press-Lok® Low Profile Male to Male Press-Lok®

Product T2 B C LDescription Number (in) (mm) (mm) (mm)24PLLM-24MSA 7304-6249 1 1/2 63 51.5 115.00

Press-Lok® Low Profile Male to Female Press-Lok®

Reference Product CouplingDescription Number (in)24PLLM-24FSA 7304-6246 1 1/2

Staple for Low Pressure Carbon Steel Reference Product CouplingDescription Number (in)24SSL 7304-6242 1 1/232SSL 7304-6232 2

C

L

B

C

L

B

T2

C

L

B

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


STANDARD HYDRAULIC HOSE

G8K Spiral Wire Hose Ultra High Pressure


Recommended For: Ultra high-pressure, high-impulse applications such as hydrostatic transmissions, for use in the construction, agriculture, forestry, underground or open pit mining, or other industries on applications where extremely high pressure capability is required. G8K hose and couplings offer industry-leading bend radius capability, which leads to ease of routing and installation, longer hose life in flexing applications, and fewer bent tube fitting requirements.

Tube: Black, oil-resistant Neoprene Type A tube material allows for the high pressure, high temperature performance required in these demanding applications. See Hose Stock Characteristics.

Reinforcement: Six alternating layers of high tensile steel wire spiral construction.

Cover: Black, oil resistant, synthetic rubber (Neoprene - Type A), with color coded layline.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): G8K Couplings

EFG6K Spiral Wire Hose—SAE 100R15 Extremely High Pressure


Recommended For: Extremely high-pressure, high-impulse applications such as hydrostatic transmissions. EFG6K is designed to meet or exceed all requirements of SAE 100R15 specifications and performance requirements of EN 856 4SP (-6, -8, -10 and -12), EN 856 4SH (-12, -16, and -20), and ISO 3862 Type R15 (-6, -8, -10, -12, -16, -24 and -32). Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as standard petroleum-based fluids. Available in 121' through 200' continuous lengths.

Tube: Black, oil resistant, synthetic rubber (Nitrile - Type C). See Hose Stock Characteristics.

Reinforcement: Four (six for -20, -24 and -32) alternating layers of spiraled, high-tensile steel.

Cover: Black, oil resistant, synthetic rubber (Neoprene - Type A). Color coded layline . Also available with unique abrasion resistant MegaTuff® cover. See Hose Stock Characteristics.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GlobalSpiral™ Couplings (-6 through -20) GlobalSpiral™ High Pressure Couplings (-24 and -32) Stainless Steel "S" Couplings

For Biodegradable Hydraulic Fluids

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


EFG6K Spiral Wire Hose—MegaTuff® CoverExtremely High Pressure

EFG5K Spiral Wire Hose—SAE 100R13Extremely High Pressure


Recommended For: Extremely high-pressure, high-impulse applications such as hydrostatic transmissions. EFG5K is designed to meet or exceed all requirements of SAE 100R13 specifications and performance requirements of EN 856 4SP (-6, -8, -10 and -12), EN 856 4SH (-12, -16, and -20), and ISO 3862 Type R13 (-6, -8, -10, -12, -16, -24). Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as standard petroleum-based fluids. Available in 121' through 200' continuous lengths.


Reinforcement: Four (six for 20, -24 and -32) alternating layers of spiraled, high-tensile steel.

Cover: Black, oil resistant, synthetic rubber (Neoprene - Type A), with color coded layline. Also available with unique abrasion resistant MegaTuff® cover. See Hose Stock Characteristics.





Recommended For: Extremely high-pressure, high-impulse applications such as hydrostatic transmissions. EFG6K is designed to meet or exceed all requirements of SAE 100R15 specifications and performance requirements of EN 856 4SP (-6, -8, -10 and -12), EN 856 4SH (-12, -16, and -20), and ISO 3862 Type R15 (-6, -8, -10, -12, -16, -24 and -32). Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as standard petroleum-based fluids. Available in 121' through 200' continuous lengths.


Reinforcement: Four (six for 20, -24 and -32) alternating layers of spiraled, high-tensile steel.

Cover: Black, oil, abrasion and weather resistant MegaTuff® cover with synthetic rubber (Neoprene - Type A) base, with color coded layline. Also available in Standard cover. See Hose Stock Characteristics.




MegaTuff® hose lasts up to 300 times longer than standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945.

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



EFG5K Spiral Wire Hose—MegaTuff® Cover Extremely High Pressure


Recommended For: Extremely high-pressure, high-impulse applications such as hydrostatic transmissions. EFG5K is designed to meet or exceed all requirements of SAE 100R13 specifications and performance requirements of EN 856 4SP (-6, -8, -10 and -12), EN 856 4SH (-12, -16, and -20), and ISO 3862 Type R13 (-6, -8, -10, -12, -16, -24). Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as standard petroleum-based fluids. Available in 121' through 200' continuous lengths.


Reinforcement: Four (six for -20 and -24) alternating layers of spiraled, high-tensile steel.






EFG4K Spiral Wire Hose—SAE 100R12 Extremely High Pressure


Recommended For: Extremely high-pressure, high-impulse applications. Exceeds all performance requirements for SAE 100R12, EN 856 R12 and ISO 3862 Type R12. Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as standard petroleum-based fluids. Available in 121' through 200' continuous lengths.


Reinforcement: Four alternating layers of spiraled, high-tensile steel wire.



Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GlobalSpiral™ Couplings Stainless Steel "S" Couplings


Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


EFG4K Spiral Wire Hose—MegaTuff® CoverExtremely High Pressure

EFG3K Spiral Wire Hose—SAE 100R12Extremely High Pressure


Recommended For: Extremely high-pressure, high-impulse applications. Exceeds all performance requirements for SAE 100R12, EN 856 R12, performance requirements of EN 856 4SP, and ISO 3862 Type R12. Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as standard petroleum-based fluids. Available in 121' through 200' continuous lengths.





Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GSP Couplings (-24 and -32) GlobalSpiral™ Couplings (-6 through -20) Stainless Steel "S" Couplings


Recommended For: Extremely high-pressure, high-impulse applications. Exceeds all performance requirements for SAE 100R12, EN 856 R12 and ISO 3862 Type R12. Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as standard petroleum-based fluids. Available in 121' through 200' continuous lengths.





Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GlobalSpiral™ Couplings Stainless Steel "S" Couplings




Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



EFG3K Spiral Wire Hose—MegaTuff® Cover Extremely High Pressure


Recommended For: Extremely high-pressure, high-impulse applications. Exceeds all performance requirements for SAE 100R12, EN 856 R12, performance requirements of EN 856 4SP, and ISO 3862 Type R12. Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as standard petroleum-based fluids. Available in 121' through 200' continuous lengths.





Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GSP Couplings (-24 and -32) GlobalSpiral™ Couplings (-6 through -20) Stainless Steel "S" and "B" Couplings



Hot Oiler 2-Wire Braid Hose High Pressure


Recommended For: Static pressure, hot oiler applications. Designed specifically to handle the transfer of hot oil at 275°F continuous, 300°F intermittent to clear the paraffin around the casing to help start the flow of oil to the surface.



Cover: Black, oil and abrasion resistant, synthetic rubber (Hypalon® - Type M).


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): Field Attachable Type T Couplings GSP Couplings

† Hypalon® is a Registered Trademark of E.I. du Pont de Nemours and Company.

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


M-XP™ Million Impulse Xtra Performance Wire Braid HoseHigh Pressure

Global M6K Mega6000™ HoseHigh Pressure


Recommended For: High-pressure hydraulic applications. Provides tighter than standard minimum bend radius and greater flexibility for easier plumbing.



Cover: Black, oil, abrasion and weather resistant, synthetic rubber (Modified Nitrile - Type C2), with color coded layline. See Hose Stock Characteristics.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): MegaCrimp® Couplings Stainless Steel "B" Couplings


Recommended For: High-pressure, high impulse life hydraulic applications. Provides tighter than standard minimum bend radius and greater flexibility for easier plumbing.





Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): MegaCrimp® Couplings

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



Global M5K Mega5000™ Hose High Pressure

Global M5K Mega5000™ Hose—MegaTuff® Cover High Pressure





Cover: Black, oil, abrasion and weather resistant, synthetic rubber (Modified Nitrile - Type C2), with color coded layline. Also available with unique abrasion resistant MegaTuff® or XtraTuff™ cover. See Hose Stock Characteristics.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GlobalSpiral™ Couplings MegaCrimp® Couplings Stainless Steel "B" Couplings





Cover: Black, oil, abrasion and weather resistant MegaTuff® cover with synthetic rubber (Neoprene - Type A) base, with color coded layline. Also available in Standard or XtraTuff™ cover. See Hose Stock Characteristics.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GlobalSpiral™ Couplings MegaCrimp® Couplings

M5K-MTF

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Global M5K Mega5000™ Hose—XtraTuff™ CoverHigh Pressure

Global M4K Mega4000™ Hose—SAE 100R19High Pressure

Meets Flame Resistance Acceptance Designation "MSHA 2G", and ISO11237 R19

Recommended For: High-pressure hydraulic applications. Exceeds SAE 100R19 and ISO11237 R19. Allows for tighter minimum bend radius, increased working pressure and improved impulse cycles than industry standards. Provides greater performance, flexibility, easier routing and plumbing of mobile and stationary hydraulic platforms.





Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GlobalSpiral™ Couplings MegaCrimp® Couplings Stainless Steel "S" and "B" Couplings





Cover: Black, oil, abrasion and weather resistant, synthetic rubber (Modified Nitrile - Type C2), with color coded layline. Also available in Standard or MegaTuff® cover. See Hose Stock Characteristics.



Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



Global M4K Mega4000™ Hose—MegaTuff® Cover High Pressure

Global M4K Mega4000™ Hose—XtraTuff™ Cover High Pressure
















XtraTuff™ hose lasts up to 25 times longer than standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945.

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


M4KH Wire Braid Hose—High-Temp—SAE 100R19High Pressure

M4KH Wire Braid Hose—High-Temp—MegaTuff® CoverHigh Pressure





Cover: Black, oil, abrasion and weather resistant MegaTuff® cover with synthetic rubber (Neoprene - Type A) base, with color coded layline. Flame resistance - MSHA 2G.







Cover: Black, oil, abrasion and weather resistant, thin synthetic rubber (Neoprene - CR), with color coded layline. Flame resistance - MSHA 2G.




(Meets Flame Resistance Acceptance Designation "MSHA 2G", and ISO11237 R19)

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



Global M3K Mega3000® Hose—SAE 100R17 High Pressure

Global M3K Mega3000® Hose—MegaTuff® Cover High Pressure


Recommended For: High-pressure hydraulic oil lines. Exceeds SAE 100R17 and ISO11237 R17 working pressure, minimum bend radius requirements and performance requirements of EN 857 1SC. M3K hose has smaller exterior dimensions and significantly tighter bend radius than other SAE 100R1 and 100R2 hose.


Reinforcement: Braided, high-tensile steel wire. -4, -5, -6 and -8 sizes are one braid; -10, -12 and -16 sizes are two braid.



Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GlobalSpiral™ Couplings MegaCrimp® Couplings Power Crimp® Couplings (-3 only) Stainless Steel "B" Couplings









Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Global M3K Mega3000® Hose—XtraTuff™ CoverHigh Pressure

M3KH Wire Braid Hose—High-Temp—SAE 100R17High Pressure


Recommended For: High-pressure hydraulic oil lines. Exceeds SAE 100R17 and ISO11237 R17 requirements and performance requirements of EN 857 1SC. M3KH hose has smaller exterior dimensions and significantly tighter bend radius than other SAE 100R1 and 100R2 hose.


Reinforcement: One braid of high-tensile steel wire.

Cover: Black, oil, abrasion and weather resistant, synthetic rubber (Neoprene CR), with color coded layline. See Hose Stock Characteristics.











Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



M3KH Wire Braid Hose—High-Temp—MegaTuff® Cover High Pressure

M2T® MegaFlex® 2-Wire Braid Hose—SAE 100R16 High Pressure


Recommended For: High-pressure hydraulic oil lines. Exceeds SAE 100R17 and ISO11237 R17 working pressure, minimum bend radius requirements and performance requirements of EN 857 1SC. M3KH hose has smaller exterior dimensions and significantly tighter bend radius than other SAE 100R1 and 100R2 hose.







Meets Flame Resistance Acceptance Designation "MSHA 2G", and ISO11237 2SC R16

Recommended For: High-pressure hydraulic oil lines. Exceeds SAE 100R16 and ISO11237 2SC R16 requirements and performance requirements of EN 857 2SC. M2T hose has smaller exterior dimensions and significantly tighter bend radius.






Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


M2T® MegaFlex® 2-Wire Braid Hose—MegaTuff® CoverHigh Pressure

M2T® MegaFlex® 2-Wire Braid Hose—XtraTuff™High Pressure


Recommended For: High-pressure hydraulic oil lines. Exceeds SAE 100R16 and ISO11237 2SC R16 working pressure, minimum bend radius requirements and performance requirements of EN 857 2SC.

M2T hose has smaller exterior dimensions and significantly tighter bend radius.







Recommended For: High-pressure hydraulic oil lines. Exceeds SAE 100R16 and ISO11237 2SC R16 working pressure, minimum bend radius requirements and performance requirements of EN 857 2SC. M2T hose has smaller exterior dimensions and significantly tighter bend radius.








Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



CM2T MegaFlex® Connected Twin-Line 2-Wire Braid—SAE 100R16 High Pressure

Global G2 2-Wire Braid Hose—SAE 100R2 Type AT High Pressure


Recommended For: High-pressure hydraulic oil lines joined together for easier plumbing and routing. Meets SAE 100R16 requirements. CM2T hose has smaller exterior dimensions and significantly tighter bend radius. Exceeds performance standards of EN 857 2SC and ISO/DIS 1436.







Recommended For: High-pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2, ISO1436 2SN R2 and EN 853 2SN.



Cover: Black, oil and abrasion resistant, thin synthetic rubber (Modified Nitrile - Type C2). See Hose Stock Characteristics.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): Field Attachable Type T Couplings GSP Couplings (-24 and -32) GlobalSpiral™ Couplings MegaCrimp® Couplings (except -24 and -32) Stainless Steel "B" Couplings

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


G2XH 2-Wire Braid Extreme Heat Hose—SAE 100R2High Pressure

Global G2H High-Temp 2-Wire Braid HoseHigh Pressure





Cover: Black, oil resistant, synthetic rubber (Hypalon® - Type M). Also available with unique abrasion resistant MegaTuff® cover. See Hose Stock Characteristics.

Temperature Range: -40°F to +275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent (up to 10% of operating time). For water emulsions see Temperature Limits Table.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): Field Attachable Type T Couplings GSP Couplings (-24 and -32) MegaCrimp® Couplings (-20)



Recommended For: High-pressure hydraulic applications where pressure or temperature requirements exceed SAE 100R2, ISO1436 2SN R2 and EN 853 2SN or where resistance to either petroleum-base or phosphate ester fluids is required. Meets SAE J1942 requirements.

Tube: Black, oil and chemical resistant, synthetic rubber (CPE).


Cover: Blue, oil and abrasion resistant, thin synthetic rubber Hypalon®. Flame resistance - U.S. MSHA 2G.

Temperature Range: Petroleum-base fluids: -40°F to +300°F (-40°C to +149°C). Phosphate esters fluids as recommended by the fluid manufacturer, but within a range of -40°F to +212°F. For water emulsions: Max. +225°F Pressure lines, Max +180°F Return lines. For water emulsions see Temperature Limits Table.



Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



Global G2H High-Temp—MegaTuff® Cover High Pressure

Global G2L PolarFlex® Hose—SAE 100R2 Type AT High Pressure





Cover: Black, oil and abrasion resistant, synthetic rubber and MegaTuff® cover. Also available in Standard cover. See Hose Stock Characteristics.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): Field Attachable Type T Couplings GSP Couplings (-24 and -32) MegaCrimp® Couplings (-20)



Recommended For: High-pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2, ISO1436 2SN R2 and EN 853 2SN. Qualified to Mil-DTL-13531 Type II Class B.



Cover: Black, oil and abrasion resistant, thin synthetic rubber (Neoprene - Type A). See Hose Stock Characteristics.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): Field Attachable Type T Couplings GSP Couplings (-24 and -32) MegaCrimp® Couplings (except -24 and -32)

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


J2AT 2-Wire Braid Jack Hose—10,000 Static Pressure OnlyHigh Pressure

J2AT 2-Wire Braid Jack Hose—MegaTuff® Cover— 10,000 Static Pressure OnlyHigh Pressure


Recommended For: Hydraulic jack applications. Meets Material Handling Institute specification IJ 100 for hydraulic hose and assemblies used with jacking systems. 10,000 Static Pressure Only



Cover: Black, oil and abrasion resistant, synthetic rubber and MegaTuff® cover. Also available in Standard cover. See Hose Stock Characteristics.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): Use MegaCrimp® Male Pipe Long Nose Couplings on jack end of assembly for engagement.


Recommended For: Hydraulic jack applications. Meets Material Handling Institute specification IJ 100 for hydraulic hose and assemblies used with jacking systems. 10,000 Static Pressure Only



Cover: Black, oil and abrasion resistant, synthetic rubber (Modified Nitrile - Type C2). Also available with unique abrasion resistant MegaTuff® cover. See Hose Stock Characteristics.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): Use MegaCrimp® Male Pipe Long Nose Couplings on jack end of assembly for engagement.


Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



G1 1-Wire Braid Hose—SAE 100R1 Type AT Medium Pressure

G1H 1-Wire Braid Hose—High-Temp—SAE 100R1 Type AT Medium Pressure


Recommended For: Medium pressure hydraulic lines. Meets or exceeds the requirements of SAE 100R1, ISO 1436 1SNR1 and EN 853 1SN.



Cover: Black, oil and abrasion resistant, synthetic rubber (Modified Nitrile - Type C2). See Hose Stock Characteristics.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): Field Attachable Type T Couplings GSP Couplings (-24 and -32) MegaCrimp® Couplings (except -3, -24 and -32) Stainless Steel "B" Couplings


Recommended For: Medium pressure hydraulic oil lines. Meets or exceeds requirements of SAE 100R1 Type AT.



Cover: Black, oil and abrasion resistant, synthetic rubber (Hypalon® - Type M).


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GSP Couplings (-24 and -32) MegaCrimp® Couplings (except -24 and -32) Stainless Steel "B" Couplings (-24 and -32 only)


Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


RFS Red Fire Suppressant HoseMedium Pressure

MegaTech® II—SAE 100R2 Type AT—ACP Carton PackHigh Pressure

Recommended For: Multi-purpose high-pressure, high-temperature, air compressor lines, petroleum-base or phosphate ester hydraulic fluid supply lines. Meets the requirements of SAE J1405 performance specifications for high-temperature transmission and lubricating oil systems using petroleum base oils. Meets or exceeds the requirements of SAE 100R2 and SAE 100R2 Type S.

Tube: Black, oil resistant, synthetic rubber (CPE - Type J). See Hose Stock Characteristics.


Cover: Blue, oil and abrasion resistant, polyester braid.

Temperature Range: -40°F to +300°F (-40°C to +149°C).

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GSP Couplings (-24 and -32) MegaCrimp® Couplings (-20 only)


Recommended For: Low-pressure powder fire suppressant applications in mining, forestry and fire fighting equipment. The red cover is for easy visual identification in these applications. Meets performance requirements of SAE 100R1.



Cover: Red, oil and abrasion resistant (Modified Nitrile - Type C2).


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): MegaCrimp® Couplings Power Crimp® Couplings (-3 only)

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



MegaTech® 3000 High-Temp Oil/Air Return

MegaTech® 1000 High-Temp Oil/Air Return Fleet Application

Recommended For: For pressurized hot oil return lines and rotary oil lines. Meets the requirements of SAE J1405 performance specifications for high-temperature transmission and lubricating oil systems using petroleum base oils.

Tube: True-bore GTS (Gates Technical Spec.) black tube specifically compounded for temperature and chemical resistance (CPE - Type J).


Cover: Oil and mildew resistant, textile braid, impregnated with synthetic rubber.

Temperature Range: Petroleum-base fluids: -40°F to +300°F (-40°C to +149°C). Phosphate esters fluids as recommended by the fluid manufacturer, but within a range of -40°F to +212°F (-40°C to +100°C).


Recommended For: Air brake, pressurized hot oil return lines and rotary oil/air compressor lines. Meets the requirements of DOT FMVSS 106-74, SAE J1402, for Air Brake Hose (-4, 6, 8, 10), and SAE J1405 performance specifications for high-temperature transmission and lubricating oil systems using petroleum base oils. Not recommended for gasoline or diesel fuel applications.

Tube: GTS (Gates Technical Spec.) black tube specifically compounded for temperature and chemical resistance (CPE - Type J). See Hose Stock Characteristics.





Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


MegaTech® 500 High-Temp Oil/Air ReturnFleet Application

MegaTech® 250 High-Temp Transmission Oil Cooler (TOC) Hose

Recommended For: High-temperature (300°F) transmission oil cooler lines, pressurized hot oil return lines and turbocharger oil supplies. Meets or exceeds SAE J1405 performance specifications for high-temperature transmission and lubricating oil systems using petroleum base oils. Not recommended for gasoline or diesel fuel applications.





Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GLP Couplings (-4 through -12) MegaCrimp® Couplings

Recommended For: For air brake hose, pressurized hot oil return lines and rotary oil/air compressor lines. Meets the requirements of SAE J1405 performance specifications for high-temperature transmission and lubricating oil systems using petroleum base oils. Not recommended for gasoline or diesel fuel applications.





Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GL Couplings GSP Couplings (-24 and -32)

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



MegaTech® G5TB Extreme Heat Oil/Air Return

M500 Wire Braid Hose Low Pressure

Recommended For: For pressurized hot oil return lines and rotary oil lines. Meets the requirements of SAE J1405 performance specifications for high-temperature transmission and lubricating oil systems using petroleum base oils.



Cover: Blue, oil and mildew resistant textile braid, impregnated with synthetic rubber.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GL Couplings (-24 and -32 only) MegaCrimp® Couplings


Recommended For: Pilot lines, grease lines and pressure return lines, 500 psi or less pressure applications.

Tube: Black, oil resistant, synthetic rubber (NBR).


Cover: Black, oil and abrasion resistant, synthetic rubber, flame resistance. Also available with unique abrasion resistant XtraTuff™ cover. See Hose Stock Characteristics.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GLP Couplings MegaCrimp® Couplings

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


M500 XtraTuff™ Wire BraidLow Pressure

TR500 High-Temp/Air Brake/Engine Hose

Recommended For: Air brake hose, high temperature pressurized oil return lines and rotary oil/air compressor lines, engine and transmission coolant lines and lube oil lines. Meets or exceeds DOT FMVSS 106-74, SAE J1402 for air brake hose (4, 6, 8, 10). Not recommended for gasoline or diesel fuel applications.

Tube: Black (Nitrile - Type C). See Hose Stock Characteristics.






Recommended For: Pilot lines, grease lines and pressure return lines, 500 psi or less pressure applications.

Tube: Black, oil resistant, synthetic rubber (NBR).


Cover: Black, oil and abrasion resistant, synthetic rubber, flame resistance. Also available in Standard cover. See Hose Stock Characteristics.



M500-XTF

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



G3H High-Temp 2-Fiber Braid Hose—SAE 100R3 Medium Pressure

GTH High-Temp 1-Fiber Braid Hose—SAE 100R6 Low Pressure

Recommended For: Hydraulic oil lines, anti-freeze solutions or water. Meets or exceeds requirements of SAE 100R3.

Tube: Black, synthetic rubber (Nitrile - Type C). See Hose Stock Characteristics.

Reinforcement: Two fiber braids.

Cover: Black, oil and abrasion resistant, synthetic rubber (Neoprene - Type A). See Hose Stock Characteristics.

Temperature Range: For hydraulic oil lines -40°F to +275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent (up to 10% of operating time).

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): MegaCrimp® Couplings (-4, -6, -8, -10)

Recommended For: Hydraulic oil lines, heavy-duty transmission oil cooler lines and glycol anti-freeze solutions. Meets or exceeds requirements of SAE 100R6.

Tube: Black, specially compounded, synthetic rubber (Nitrile - Type C). See Hose Stock Characteristics.

Reinforcement: One fiber braid.



Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GLP Couplings (except -3 and -5) MegaCrimp® Couplings (except -3) Power Crimp® Couplings (-3 only)

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


GTHX High-Temp Fiber Spiral Hose—SAE 100R6Low Pressure

GMV Global MegaVac® Return Line and Suction HoseLow Pressure


Recommended For: Petroleum and water-base hydraulic fluids in suction lines or in low pressure return lines. Meets or exceeds requirements of SAE 100R4. Uses half the bend radius of SAE 100R4. Meets marine ABS with use of HeatGuard® high temp sleeve.

Tube: Black, synthetic rubber is specifically designed for resistance to high temperatures (Nitrile - Type C). See Hose Stock Characteristics.

Reinforcement: Double spiral textile (braid for -12, -16 and -20) reinforced with a helical spiral-wire to prevent collapse.

Cover: Black synthetic rubber is oil and abrasion resistant (Neoprene - Type A). See Hose Stock Characteristics.

Temperature Range: -40°F to +275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent (up to 10% of operating time).

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GL Couplings MegaCrimp® Couplings (-12 through -20)

Recommended For: Hydraulic oil lines, heavy-duty transmission oil cooler lines and glycol anti-freeze solutions. Meets or exceeds requirements of SAE 100R6.

Tube: Black, specially compounded, synthetic rubber (Nitrile - Type C). See Hose Stock Characteristics.

Reinforcement: Spiraled synthetic fiber.




Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



G4H MegaVac® Return Line and Suction Hose Low Pressure

RLA 1-Fiber Braid Return Line and Low Pressure Hose Low Pressure


Recommended For: Petroleum and water-base hydraulic fluids in suction lines or in low pressure return lines. Meets or exceeds requirements of SAE 100R4 (except 1" I.D.). Uses half the bend radius of SAE 100R4.

Tube: Black, synthetic rubber is specifically designed for resistance to high temperatures (Nitrile - Type C). See Hose Stock Characteristics.

Reinforcement: Double spiral textile reinforced with a helical spiral-wire to prevent collapse.

Cover: Black synthetic rubber is oil and abrasion resistant (Neoprene - Type A). See Hose Stock Characteristics.

Temperature Range: -40°F to +275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent (up to 10% of operating time).

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GL Couplings MegaCrimp® Couplings Use clamp over beaded nipple.


Recommended For: Low-pressure hydraulic oil return lines for general purpose water, glycol antifreeze solutions, conveying diesel fuel, gasoline or air. Meets SAE 30R2 performance requirements of both Type 1 and Type 2 for fuel and B20 constant contact up to 125°F biodiesel fuel transfer applications.


Reinforcement: One fiber braid (-3 to -10). Spiral braid (-12 to -16).

Cover: Black, synthetic rubber. Oil and abrasion resistant (Modified Nitrile - Type C2). See Hose Stock Characteristics.

Temperature Range: -40°F to +212°F (-40°C to +100°C). Air to +160°F (+71°C) only.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): GLP Couplings (except -3, -5 and -16) MegaCrimp® Couplings (except -3) Power Crimp® Couplings (-3 only)

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


RLC 3-Fiber Braid Return Line and Low Pressure HoseLow Pressure

MegaTech® LOC 1-Fiber Braid High-Temp Lock-On HoseLow Pressure

Recommended For: High-temperature (300°F) transmission oil cooler lines, pressurized hot oil return lines and turbocharger oil supply lines. Meets or exceeds SAE J1405 performance specifications for high-temperature transmission and lubricating oil systems using petroleum base oils. Not recommended for gasoline or diesel fuel applications.





Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): Field Attachable LOC Couplings GLP Couplings (-4 to -12) MegaCrimp® Couplings (-16)

Recommended For: Petroleum-base hydraulic oils, glycol antifreeze, air or water in low pressure fluid transfer or hydraulic system return lines. Generally connected to 100R4 stems, beaded nipples, or tube type ports with worm gear clamps.


Reinforcement: Three fiber braids.

Cover: Black, oil and abrasion resistant, synthetic rubber (Modified Nitrile - Type C2). See Hose Stock Characteristics.

Temperature Range: For hydraulic oil lines -40°F to +275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent (up to 10% of operating time); air to +160°F (+71°C) only. For water emulsions see Temperature Limits Table.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): Use barbed stem or beaded-tube with clamps only.

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



LOC 1-Fiber Braid Lock-On Hose Low Pressure

LOL Plus Lock-On Hose Low Pressure

Recommended For: Petroleum-base hydraulic oils, glycol antifreeze compounds, water, engine lubricating oils and air. Lock-On hose and couplings are NOT recommended for vibration or pressure surge applications, such as permanent piping in residential or commercial buildings. Meets SAE 30R2, SAE 30R6 and SAE 30R7 performance requirements for fuel and B20 biodiesel fuel transfer applications up to +125°F.




Temperature Range: -40°F to +250°F (-40°C to +121°C). For air: -40°F to +160°F (-40°C to +71°C).

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): Field Attachable LOC Couplings GLP Couplings

Black Cover Only Meets Flame Resistance Acceptance Designation "MSHA 2G"

Recommended For: Petroleum-base hydraulic oils, water, glycol antifreeze solutions, engine lubricating oils, and air. Lock-On hose and couplings are NOT recommended for pressure surge applications or critical applications, such as permanent piping in residential or commercial buildings. Do not use for gasoline or diesel fuels, unless approved by Gates H/C Product Application.

Tube: Black, oil resistant, synthetic rubber highly resistant to oil and heat (Nitrile - Type C). See Hose Stock Characteristics.


Cover: Oil and abrasion resistant synthetic rubber (Modified Nitrile - Type C2). Available in black Neoprene (LOLA), blue (LOLB), green (LOLG), red (LOLR), yellow (LOLY) and gray (LOLC) colors.

Temperature Range: -40°F to +212°F (-40°C to +100°C). Air to +160°F (+71°C) only.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): Field Attachable LOC Couplings GLP Couplings (except -3) Use clamp over beaded nipple.

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


C5C Hydraulic Hose—SAE 100R5

C5D High-Temp Multi-Fluid Hose

Recommended For: Petroleum-base or phosphate ester fluids; diesel fuels and filtration lines, transmission coolant lines, hot lube oil lines, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), gasoline and turbocharger oil supplies. Tilt cab cylinder and air brakes. C5D (-4 to -12) meets or exceeds DOT FMVSS 106-74 Type All, SAE J1402 Type All and SAE J1405 and fuel resistance of SAE J30R2. Not approved for bio diesel.

Tube: Black, oil and heat resistant, synthetic rubber (CPE - Type J). See Hose Stock Characteristics.

Reinforcement: One braid of high-tensile steel wire over one braid of polyester.

Cover: Green for easy identification, oil and mildew resistant, polyester braid impregnated with synthetic rubber.

Temperature Range: -40°F to +300°F (-40°C to +149°C). Air to +250°F (+121°C) only, maximum phosphate esters to +212°F (+100°C).

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): C5 Field Attachable Couplings

Recommended For: Medium pressure hydraulic petroleum-based oil lines in impulse applications, lube oil, air and water in applications such as air brakes, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), turbocharger oil supplies, tilt cab cylinders, transmission coolant and filtration lines. Meets or exceeds requirements of SAE 100R5 for traditional hydraulic applications, DOT FMVSS 106-74 Type AII and SAE J1402 Type AII for air brake applications (-4 to -12). Not recommended for gasoline or diesel fuel.

Tube: -4 and -5: black, oil and heat resistant synthetic rubber (Neoprene - Type A); -6 through -40: (Nitrile - Type C). See Hose Stock Characteristics.

Reinforcement: One braid of high-tensile carbon steel wire over one braid of polyester.

Cover: Black, oil and mildew resistant, polyester braid.

Temperature Range: Under SAE 100R5 (hydraulic) conditions -40°F to +212°F (-40°C to +100°C). All-purpose fleet application (hot lube oil lines) -40°F to +300°F (-40°C to +149°C). Air to +160°F (+71°C) only. Avoid continuous use at maximum temperature concurrent with maximum working pressures.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): C5 Field Attachable Coupling

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



C5M Marine Fuel Line Hose

C5E High-Temp Flexline Hose


Recommended For: On-shore/off-shore and marine diesel fuel and gasoline applications and hot oil lines up to +212°F. Meets USCG marine fuel line specifications, SAE J1527 B100 to +125°F Type A Class 1 and SAE J1942 requirements. Exceeds performance requirements of SAE J30R2 for non-marine applications.

Tube: Nitrile - Type C. See Hose Stock Characteristics.

Reinforcement: One wire braid

Cover: Modified Nitrile - Type C2. Blue. See Hose Stock Characteristics.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): C5 Field Attachable Couplings

Recommended For: Air brake hose, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), fuel filter, engine and transmission coolant lines, and hot (+300°F) lube oil lines.

Tube: Black, oil and heat resistant, synthetic rubber (Nitrile - Type C). See Hose Stock Characteristics.

Reinforcement: One braid of high-tensile steel wire over one braid of polyester.

Cover: Black, oil and heat resistant, textile braid impregnated with synthetic rubber. Green stripe for easy identification.

Temperature Range: -40°F to +300°F (-40°C to +149°C). Air +250°F (+121°C) maximum only. For water emulsions see Temperature Limits Table.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): C5E Field Attachable Couplings

DOT FMVSS 106 Type A1, SAE J1405 and SAE J1402 Type A1 (-4 to -12).

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Nylon Air Brake Tubing

C14 PTFE Hose—SAE 100R14 Type A—Nonconductive

Recommended For: Air compressor discharge, hot oil and fluids, hot and greasy environments.

Cover/Reinforcement: One braid of 300 Series stainless steel wire.

Temperature Range: Dynamic: -65°F to +400°F (-54°C to +204°C). Static: -65°F to +450°F (-54°C to +232°C).

C14 Tube: Type A-Nonconductive white, smooth bore Polytetrafluoroethylene (PTFE). See Hose Stock Characteristics.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): C14 Couplings

Recommended For: Truck, bus and mobile air brake, and service lines where heat and battery acids are not present. Conforms to SAE J844 specifications. Meets D.O.T. FMVSS 106-74.

Tube: Heat and light stabilized seamless extruded nylon.

Reinforcement: Type A: Non-reinforced in sizes 1/8", 5/32", 3/16" and 1/4". NOTE: 1/8" and 5/32" are NOT recognized by D.O.T. for air brake systems, these are for service lines only. Type B: Reinforced with one open ply of fibrous nylon in sizes 5/16", 3/8", 1/2", 5/8" and 3/4".

Cover: Nylon. Available in black (NABTA), blue (NABTB), green (NABTG), red (NABTR), yellow (NABTY), orange (NABTO), purple (NABTP), brown (NABTN), silver (NABTS) and white (NABTW) colors. Other colors available upon request.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): Gates DOT SureLok™ Couplings

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



C14CT PTFE Hose—SAE 100R14 Type B—Conductive

TH8 Hydraulic Hose—SAE 100R8 Thermoplastic

Recommended For: Air compressor discharge, hot oil and fluids, hot and greasy environments.

Cover/Reinforcement: One braid of 300 Series stainless steel wire.

Temperature Range: Dynamic: -65°F to +400°F (-54°C to +204°C). Static: -65°F to +450°F (-54°C to +232°C).

C14CT Tube: Type B-Conductive black/white smooth bore Polytetrafluoroethylene (PTFE). See Hose Stock Characteristics.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): C14 Couplings

Recommended For: Use with petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. TH8 hose meets or exceeds performance requirements of SAE 100R8 with a significantly tighter bend radius. Multiline available.

Tube: 100% seamless Nylon - Type Z that easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol. See Hose Stock Characteristics.

Reinforcement: Two polyester braids.

Cover: Black urethane resists hydraulic fluids, high temperatures, aging and weathering. Black TH8 cover is perforated for use in general hydraulic and pneumatic service.

Temperature Range: -65°F to +200°F (-54°C to +93°C) continuous service for petroleum and synthetic oils. Maximum of +158°F (+70°C) for water, water/oil emulsions and water glycol.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): MegaCrimp® Couplings (-4 through -16) Swage PCTS Couplings (-3 only)

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


TH8NC Non Conductive Hydraulic Hose—SAE 100R8Thermoplastic

TH7 Hydraulic Hose—SAE 100R7Thermoplastic

Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. TH7 hose meets or exceeds performance requirements of SAE 100R7 with a significantly tighter bend radius.


Reinforcement: Braided synthetic fiber (-2, -8, -12 and -16). Spiraled synthetic fiber (-3, -4, -5 and -6).

Cover: Black polyurethane that resists hydraulic fluids, high temperatures, aging and weathering. Black TH7 is perforated for use in general hydraulic and pneumatic service.


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): MegaCrimp® Couplings Swage PCTS Couplings (-2 and -3)

Recommended For: Use with petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. TH8NC hose (orange cover) meets SAE 100R8 non-conductivity requirements. TH8NC hose meets or exceeds performance requirements of SAE 100R8 with a significantly tighter bend radius. Multiline available.


Reinforcement: Two polyester braids.

Cover: Orange urethane resists hydraulic fluids, high temperatures, aging and weathering. TH8NC is non-perforated for applications requiring electrical non-conductivity. Meets SAE 100R8 Electrical Conductivity Test. Maximum leakage shall not exceed 50 microamperes when subjected to 75 kV/Ft. for five minutes. (Orange is industry accepted color for non-conductive hose).



Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



TH7NC Non Conductive Hydraulic Hose—SAE 100R7 Thermoplastic

TH7DL Dual Line Hydraulic Hose—SAE 100R7 Thermoplastic

Recommended For: Petroleum and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer

control lines, hydraulic lifts and farm and construction machinery. Orange color TH7NC meets SAE 100R7 non-conductivity requirements and meets or exceeds performance requirements of SAE 100R7 with a significantly tighter bend radius. Meets ANSI A92.2 for vehicle mounted aerial devices (-4 to -8).

Tube: -2, -12, and -16: 100% seamless Nylon - Type Z that easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol; -3 through -8 Polyester. See Hose Stock Characteristics.

Reinforcement: Braided synthetic fiber (except -2: Spiraled synthetic fiber).

Cover: Orange urethane that resists hydraulic fluids, high temperatures, aging and weathering. Orange TH7NC is non-perforated for applications requiring electrical non-conductivity. Meets SAE 100R7 Electrical Conductivity Test. Maximum leakage shall not exceed 50 microamperes when subjected to 75 kV/Ft. for five minutes. (Orange is industry accepted color for non-conductive hose).


Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): MegaCrimp® Couplings Swage PCTS Couplings (-2 and -3)

Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. TH7DL hose meets or exceeds performance requirements of SAE 100R7 with significantly tighter bend radius.


Reinforcement: Spiraled synthetic fiber.

Cover: Black polyurethane that resists hydraulic fluids, high temperatures, aging and weathering. Black TH7DL is perforated for use in general hydraulic and pneumatic service.



Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


TH7NCDL Non Conductive Dual Line Hydraulic Hose— SAE 100R7Thermoplastic

TH18 Constant Pressure Hydraulic Hose—SAE 100R18Thermoplastic

Recommended For: TH18 hose meets or exceeds performance requirements of SAE 100R18 with a significantly tighter bend radius. Suitable for petroleum or synthetic-based hydraulic fluids in hydraulic systems. TH18 is ideal for industrial and agricultural applications exposed to low temperatures or cyclic and quick temperature changes. Remains highly flexible in cold weather conditions and is resistant to hydraulic fluids, high temperatures, aging and weathering.

Tube: Polyester elastomer.

Reinforcement: One band of synthetic fiber.

Cover: Black, special polyester, perforated.

Temperature Range: -67°F to +212°F (-55°C to +100°C) continuous service for petroleum and synthetic oils. Maximum of +158°F (+70°C) for water-based fluids.


Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. Orange color TH7NCDL meets SAE 100R7 non-conductivity requirements and meets or exceeds performance requirements of SAE 100R7 with significantly tighter bend radius. Meets ANSI A92.2 for vehicle mounted aerial devices (-3 and -8).

Tube: Polyester.

Reinforcement: Braided synthetic fiber.

Cover: Orange urethane that resists hydraulic fluids, high temperatures, aging and weathering. Orange TH7NCDL is non-perforated for applications requiring electrical non-conductivity. Meets SAE 100R7 Electrical Conductivity Test. Maximum leakage shall not exceed 50 microamperes when subjected to 75 kV/Ft. for five minutes. (Orange is industry accepted color for non-conductive hose.)



Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts



TH18NC Constant Pressure Non Conductive Hydraulic Hose — SAE 100R18 Thermoplastic

PolarSeal® Hose Refrigerant

Recommended For: TH18NC hose meets or exceeds performance requirements of SAE 100R18 with a significantly tighter bend radius. Suitable for petroleum or synthetic-based hydraulic fluids in hydraulic systems. TH18NC non-conductive hoses are suitable for use in high-voltage applications. Remains highly flexible in cold weather conditions and is resistant to hydraulic fluids, high temperatures, aging and weathering.

Tube: Polyester elastomer.

Reinforcement: Two bands of synthetic fiber.

Cover: Special polyester, orange (industry-accepted color for non-conductive hose), non-perforated for applications requiring electrical non-conductivity. Meets SAE 100R18 Electrical Conductivity Test. Maximum leakage shall not exceed 50 microamperes when subjected to 75kV/ft for five minutes.

Temperature Range: -67°F to +212°F (-55°C to +100°C) continuous service for petroleum and synthetic oils. Maximum of +158°F (+70°C) for water-based fluids.


Recommended For: Liquid and gaseous R134a and R12 refrigerants in automotive air conditioning and industrial systems; i.e., tractors, construction trucks, mobile and stationary refrigeration units. Designed to minimize permeation of R134a refrigerant.

Tube: Black, synthetic rubber (Chloroprene - Type A). See Hose Stock Characteristics.

Reinforcement: Two layers of spiral polyester.

Cover: Black synthetic rubber (EPDM). See Hose Stock Characteristics.


Barrier: Nylon liner.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): PolarSeal® Couplings

(SAE J51, Type A2 Dimensions; SAE J51, Type D Performance; SAE J2064, Type C, Class II Performance).

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


PolarSeal® II HoseRefrigerant

Recommended For: AC systems on School/Transit Busses, RV's, Limos and other heavy equipment that has long run or hard to service AC lines. Liquid and gaseous R134a and R12 refrigerants in automotive air conditioning and industrial systems; i.e., tractors, construction trucks, mobile and stationary refrigeration units. Designed to minimize permeation of R134a refrigerant.

Tube: Black, synthetic Elastomeric rubber.

Reinforcement: Fabric Braid

Cover: Heat, Moisture and Ozone resistant black synthetic Elastomeric cover.


Barrier: Nylon liner.

Coupling Recommendation (See Crimp Data Manual 35019 or E-crimp): PolarSeal® II Coupling

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


EQUIPMENT

In the shop or in the field, Gates has a crimper for every job.

For complete crimper specifications, see the following pages.

Power Crimp® 707■ The most precise, yet simplest crimper made. ■ The first crimper with electronic digital readout

to indicate crimp diameter setting. ■ Crimps low pressure return lines to high

pressure spiral hoses, from 3/16" to 1-1/4" I.D. four-spiral wire.

■ Crimps straight and bent tube couplings, plus 45° and 90° block types.

■ Swage capable.

MobileCrimp® 4-20■ The latest in high tech crimping. ■ Portable and lightweight – only 57 pounds. ■ Powerful enough to crimp up to 1-1/4" I.D.

four spiral-wire hose. ■ Great for jobs in the field.

SC-32™ Crimper■ Compact design to minimize space required.■ High-ton ram force with an integrated pump.■ Pump pre-wired for either 110 Volt or 220 Volt (1 phase) outlets.■ Bottom-loading makes crimping easier.■ Come with all the base plates and spacers required to crimp up

to 2" hoses.

GC32-XD® Crimper■ Crimps every hose and coupling in the Gates hydraulic catalog,

including 2-1/2" Global MegaVac® return lines.■ Accepts electrical input from 208 volts to 260 volts, single phase.■ Twice as fast as the Gates OmniCrimp® 21 crimper, which the

GC32-XD is replacing.■ Patented quick change tool enables fast loading and unloading of

color-coded, numbered dies..■ 470 Radial Ton crimping force

GC96® Crimper■ Electronic touch screen control panel for fast input of crimper settings.■ Horizontal front-end feed makes crimping easier and convenient. ■ 340 ton force that allows crimping of a wide variety of couplings. ■ 2 speed die closure and rapid retract permit fast assembly fabrication. ■ Full range die sets that enable production of a wide range of hose

assemblies.■ 2" 6 wire and 6" industrial

FOR SAFETY’S SAKE

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


This lightweight, versatile crimper is powerful enough to crimp up to 1-1/4" four spiral-wire hose Weighing approximately 57 pounds, this new field crimper combines the latest crimping technology with old-fashioned toughness and durability.

For MegaCrimp® (G25) Couplings

Die Set MC21/MC31 MC22/MC32 MC33 MC34 MC35 MC37 MC39 Product No. 7482-1220/1018 7482-1221/1019 7482-1133 7482-1134 7482-1135 7482-1137 7482-1139

MobileCrimp® 4-20 Die Selection Table

Die Sets (ordered separately)

Digital Dial ControlJust dial in appropriate crimp setting and hold the start button until light comes on and buzzer sounds, then release. Ability to lock-in setting for multiple assemblies. Light and buzzer operate on two "AAA" batteries.

Product Number: 7480-0051

For other hose and coupling configurations, reference www.gates.com/ecrimp or Gates crimp data manual.

MobileCrimp® 4-20 Crimper

Hose Sizes

Hose Type 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"M3K MC21 or MC31 MC22 or MC32 MC33 MC34 MC35 MC37 —M2T MC21 or MC31 MC22 or MC32 MC33 MC34 MC35 MC37 —G1 MC21 or MC31 MC22 or MC32 MC33 MC34 MC35 MC37 MC39G2 MC21 or MC31 MC22 or MC32 MC33 MC34 MC35 MC37 MC39

For GlobalSpiral™ (G20) CouplingsHose Sizes

Hose Type 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"EFG6K MC33 MC33 MC35 MC35 MC37 —EFG5K MC33 MC33 MC35 MC35 MC37 —EFG4K MC33 MC33 MC35 MC35 MC37 MC39*

*MGS (G21 series) couplings only.

FOR SAFETY’S SAKE

Product Accessories Number

Crimper-to-Pump Male Quick Disconnect 7252-8831Crimper-to-Pump Female Quick Disconnect 7252-8830

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


EQUIPMENT

1-1/2 HP 115 Volt AC PumpHigh speed. Recommended for stationary applications only. Product Number: 7481-0035Pressure Rating: 10,000 psiWeight: 108 lbs.

MobileCrimp® 4-20 Power SourcesWide selection of pumps to match all your power needs.

Hand PumpNo power source needed. Economical, convenient and portable for use anywhere. Make factory-quality assem-blies in the field to minimize downtime.

Product Number: 7481-0006Pressure Rating: 10,000 psiWeight: 25.6 lbs.

Shop Air PumpWorks off standard shop air (90 psi). Economical, convenient and versatile for use wherever 90 psi compressed air is available.

Product Number: 7481-0002Pressure Rating: 10,000 psiWeight: 10 lbs.

1/2 HP 115 Volt AC PumpMedium speed. Economical. Recommended for a stationary or mobile application.

Product Number: 7481-0034Pressure Rating: 10,000 psiWeight: 32 lbs.

1/4 HP 12 Volt DC PumpMobile operation, runs on standard 12 volt car/truck battery or a 12 volt portable battery pack. Ideal for tough jobs in the field.

Product Number: 7481-0037Pressure Rating: 10,000 psiWeight: 20.5 lbs.

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Power Crimp® 707Gates Power Crimp 707 is the most precise, yet simplest crimper made. It was the first crimper with electronic digital readout to indi-cate gauge setting.The toughest part about using the 707 is pushing a button. It takes just a few seconds to make factory-quality hose assemblies.Crimps most hydraulic hoses from low pressure return lines to extremely high pressure spirals, from 3/16" to 1-1/4" I.D. Crimps straight and bent tube couplings, plus 45° and 90° block types. Can also be adapted for use as a power swager.

SPECIFICATIONS

Product Number: 7480-0043Standard PC707 without die sets wired for 115 volts (includes die backup ring and a notched cone).

Production Rate: 100 assemblies per hour (using 1/2" I.D. two-wire straight thread assemblies).Dimensions: 13" wide by 12" deep by 26-1/2" high.Weight: 188 lbs.

PC707 230V Converter KitConverts crimper and pumpProduct Number: 7482-0499

SPECIFICATIONS

Product Number: 7481-0023(115 volt, 30 amp, circuit, 1 h.p., 60 cycles)Dimensions: 12" wide by 25" deep by 12" high.Weight: 70 lbs.Maximum Working Pressure: 4,900 psi.

PC707 230V Converter KitConverts crimper and pumpProduct Number: 7482-0499

Power Crimp® Power SourceThe flows of two fixed displacement pumps are com-bined to deliver a high volume of oil at low pressure for fast transversion.

For MegaCrimp® (G25) Couplings For GlobalSpiral™ (G20) Couplings

Power Crimp® 707 Die Selection Table

Die Set 721/731 722/732 733 734 735 737* 739*Product No. 7482-1217/0931 7482-1218/0932 7482-0933 7482-0934 7482-0935 7482-0937 7482-0939


* Must Use No-Notch Die Cone.

Die Cones: No-Notch Product Number: 7482-0297. Notched Product Number: 7482-0239.

Hose Sizes Hose Type 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4" M3K 721 or 731 722 or 732 733 734 735 737 — M2T 721 or 731 722 or 732 733 734 735 737 — G1 721 or 731 722 or 732 733 734 735 737 739 G2 721 or 731 722 or 732 733 734 735 737 739

Hose Sizes Hose Type 3/8" 1/2" 5/8" 3/4" 1" 1-1/4" EFG6K 733 733 735 735 737 — EFG5K 733 733 735 735 737 —EFG4K 733 733 735 735 737 739


Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


EQUIPMENT

SC32™ CrimperThe Gates SC32 crimper is a versatile, easy-to-use, economical machine suitable for a hard-working shop environment. It is offered in 110V and 220V single phase versions to match the shop power supply. This rugged crimper is designed for continued use to meet day-to-day shop and coun-ter needs for crimps on hoses up to 1-1/4" I.D. with occasional crimps for larger assemblies up to 2", 6-spiral hose.

Product Number: 7480-0070Wired for 220 Volts with 2 HP electric pump

Product Number: 7480-0071Wired for 110 Volts with 1 HP electric pump


SPECIFICATIONS

Dimensions: 16.5" W x 32" D x 29" HMax. Rated Working Pressure: 10,000 psiMax. Crimping Force: 80 tonsWeight: 275 PoundsWarranty: 2 Years

SC32™ Die Selection TableFor GlobalSpiral™ (G20) Couplings For GSP & GSH Couplings


Die Set SC32-21/31 SC32-22/32 SC32-33 SC32-34 SC32-35 SC32-37* SC32-39*

Product No. 7482-1217/0931 7482-1218/0932 7482-0933 7482-0934 7482-0935 7482-0937 7482-0939

Die Set SC32-310L1 SC32-311 SC32-312 SC32-313 SC32-314

Product No. 7482-1710 7482-1711 7482-1712 7482-1713 7482-1714


1310L supersedes 310 die.* Must Use No-Notch Die Cone.

Hose Sizes HoseType 3/8" 1/2" 5/8" 3/4" 1" 1 1/4"EFG3K 733 733 735 735 737 —EFG4K 733 733 735 735 737 —EFG5K 733 733 735 735 737 739

Hose Sizes HoseType 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4" M3K 721 or 731 722 or 732 733 734 735 737 —M2T 721 or 731 722 or 732 733 734 735 737 —G1 721 or 731 722 or 732 733 734 735 737 739 G2 721 or 731 722 or 732 733 734 735 737 739

Hose Sizes HoseType 1-1/2" 2" EFG6K SC32-311 —EFG5K SC32-311 SC-314EFG3K SC32-311 SC-313G1H SC32-310(L) SC-313G2H SC32-310(L) SC-312

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Die Set 32-21 32-22 32-31 32-33 32-34 32-35 32-36 32-37

Product No. 7482-7128 7482-7129 7482-7130 7482-7131 7482-7132 7482-7133 7482-7134 7482-7135

Die Set 32-38 32-39 32-310L 32-311 32-312 32-313 32-314 32-40

Product No. 7482-7136 7482-7137 7482-7138 7482-7139 7482-7140 7482-7141 7482-7142 7482-7143

Die Set 32-41 32-42 32-43 32-44 32-46 32-81 32-82 32-83

Product No. 7482-7144 7482-7145 7482-7146 7482-7147 7482-7148 7482-7149 7482-7150 7482-7151

Die Set 32-71 32-72 32-73 32-74 32-75 32-84 32-85 32-86

Product No. 7482-7200 7482-7201 7482-7202 7482-7203 7482-7204 7482-7152 7482-7153 7482-7154

Die Set 32-87 32-331 32-45 32-3234 32-3335 32-3436 32-3537 32-3638

Product No. 7482-7155 7482-7156 7482-7157 7482-1419 7482-1420 7482-1421 7482-1430 7482-1431

Die Set 32-38311

Product No. 7482 - 1443


GC32-XD® CrimperThe new GC32-XD crimper from Gates crimps every hose and coupling in our hydraulics catalog—fast. The open crimper head accommodates any Gates hose construction or coupling configuration, including 2-1/2" Global MegaVac® return lines. And it makes them at a rate that's twice as fast as the Gates OmniCrimp® 21 crimper, which the GC32-XD is replacing. Internally, the GC32-XD uses a unique cloverleaf* design that simply produces a better crimp. Unlike standard annular head configurations, Gates exclusive cloverleaf design reinforces the piston so the dies move smoother for more consistent crimps without any taper in the crimp OD.

SPECIFICATIONS

Product Number: 7480-7001Dimensions: 37" high by 23" wide by 19-1/2" deepWeight: 660 lbs.Motor: 5 hpPump: 2-stagePower Source: 208-260V, 45-65 Hz, 1 phase and 20 AmpsMaximum Operating Pressure: 470 tonsStand: (Optional): 25-1/2" high by 31-3/4" wide by 16-1/2" deep (height adjustable)

*Patent pending

Rack and stand sold separately

GC32 -XD®

Crimper



For GlobalSpiral™ (G20) Couplings For GSP & GSH Couplings Hose Sizes

Hose Type 1-1/2" 2" EFG6K 32-311 —EFG5K 32-311 32-314EFG3K 32-311 32-313G1H 32-310(L) 32-313G2H 32-310(L) 32-312

Hose Sizes Hose Type 3/8" 1/2" 5/8" 3/4" 1" 1-1/4" EFG6K 32-33 32-33 32-35 32-35 32-37 32-310LG5K 32-33 32-33 32-35 32-35 32-37 32-310LC12M 32-33 32-33 — 32-35 32-37 32-39

Hose Sizes Hose Type 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"M3K 32-21 or 32-31 32-22 or 32-32 32-33 32-34 32-35 32-37 — M2T 32-21 or 32-31 32-22 or 32-32 32-33 32-34 32-35 32-37 —G1 32-21 or 32-31 32-22 or 32-32 32-33 32-34 32-35 32-37 32-39G2 32-21 or 32-31 32-22 or 32-32 32-33 32-34 32-35 32-37 32-39

1/4" 3/8" 1/2"

32-3234 32-3335 32-3436

For LifeGuard™ Sleeving

5/8" 3/4" 1"

32-3537 32-3638 32-38311

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


EQUIPMENT

Die Set 32-21 32-22 32-31 32-33 32-34 32-35 32-36 32-37

Product No. 7482-7128 7482-7129 7482-7130 7482-7131 7482-7132 7482-7133 7482-7134 7482-7135

Die Set 32-38 32-39 32-310L 32-311 32-312 32-313 32-314 32-40

Product No. 7482-7136 7482-7137 7482-7138 7482-7139 7482-7140 7482-7141 7482-7142 7482-7143

Die Set 32-41 32-42 32-43 32-44 32-46 32-81 32-82 32-83

Product No. 7482-7144 7482-7145 7482-7146 7482-7147 7482-7148 7482-7149 7482-7150 7482-7151

Die Set 32-71 32-72 32-73 32-74 32-75 32-84 32-85 32-86

Product No. 7482-7200 7482-7201 7482-7202 7482-7203 7482-7204 7482-7152 7482-7153 7482-7154

Die Set 32-87 32-331 32-45 32-3234 32-3335 32-3436 32-3537 32-3638

Product No. 7482-7155 7482-7156 7482-7157 7482-1419 7482-1420 7482-1421 7482-1430 7482-1431

Die Set 32-38311

Product No. 7482 - 1443


GC96® CrimperThe GC®96 crimper is capable of crimping 2" 6 wire and up to 6" ID industrial hose. This crimper allows distributors to make reliable and professional looking assemblies providing more value to the end user. The large crimper head allows industrial hose assemblies to be made with a variety of terminations using crimpable ferrules and sleeves. The GC96 crimper has additional versatility since in conjunction with optional spacer dies and GC32-XD® dies; it can make Gates hydraulic hose assemblies also.

SPECIFICATIONS

Product Number: 7480-9001Dimensions: 31" high by 32" wide by 16" deepWeight: 650 lbs.Power Source: 208-264V, 45-65 Hz, single phase and 20 ampsCapability: 1/4"–2" Hydraulic hose 2-1/2"–4" Industrial hose5"–6" Industrial hose up to and including 100 PSI WP

GC96® Crimper



For GlobalSpiral™ (G20) Couplings For GSP & GSH Couplings Hose Sizes

Hose Type 1-1/2" 2" EFG6K 32-311 —EFG5K 32-311 32-314EFG3K 32-311 32-313G1H 32-310(L) 32-313G2H 32-310(L) 32-312

Hose Sizes Hose Type 3/8" 1/2" 5/8" 3/4" 1" 1-1/4" EFG6K 32-33 32-33 32-35 32-35 32-37 32-310LG5K 32-33 32-33 32-35 32-35 32-37 32-310LC12M 32-33 32-33 — 32-35 32-37 32-39

Hose Sizes Hose Type 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4"M3K 32-21 or 32-31 32-22 or 32-32 32-33 32-34 32-35 32-37 — M2T 32-21 or 32-31 32-22 or 32-32 32-33 32-34 32-35 32-37 —G1 32-21 or 32-31 32-22 or 32-32 32-33 32-34 32-35 32-37 32-39G2 32-21 or 32-31 32-22 or 32-32 32-33 32-34 32-35 32-37 32-39

1/4" 3/8" 1/2"

32-3234 32-3335 32-3436

For LifeGuard™ Sleeving

5/8" 3/4" 1"

32-3537 32-3638 32-38311

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


xxxxxxxxxxx

3509

3-D

(2/9

5)

428-

7244

(2/9

5)

M A D E I N U S A • P A T E N T P E N D I N G

Portable Crimper

PolarSeal® Hose Portable Crimper IIProduct Number: 7480-6599

Gates portable PolarSeal Crimper II is a hand-operated hose crimping machine specifically designed for crimping Gates PolarSeal couplings and is intended for use with Gates PolarSeal refrigerant hose. Standard dies included will crimp 5/16" (-6 Black), 13/32" (-8 Blue), 1/2" (-10 Green) and 5/8" (-12 Clear) sizes.

Features:■ Portable hand operation, easy to change over from size to size.■ Heavy-duty construction for use with air impact wrenches.■ Crimps two-braid dimension or nylon barrier hose.■ OE-style bubble crimp.■ Quick-change dies, no tools required to change sizes.■ Lightweight for easy handling, less than six lbs.■ Capable of crimping underhood air conditioning applications.■ Includes four color-coded die sets for crimping two-braid barrier hose.■ Removable die holder accommodates complicated shapes.■ Color-coded, urethane encased dies.■ Unit can be bench-mounted.■ Shipped in a custom carrying case with instructions.■ No electrical requirements.■ Locator flag centers ferrule in dies.

Vertical Hydraulic Hose CabinetRack up sales and get organized at the same time with a new ‘vertical' hydraulic hose cabinet from Gates.


■ Six narrow and two wide slots to stock a variety of hydraulic hoses.

■ Designed to support one hydraulic coupling cabinet on top for maximum efficiency.

■ Optional choice for use as cabinet base with maximum of one four-drawer cabinet.

■ Shown with four-drawer cabinet (purchase separately as Product No. 7484-0010).

PolarSeal® II Hose PliersThe PolarSeal II pliers are used to crimp the clamps on PolarSeal II couplings.

The ratcheting pliers will not release until the crimp is complete guaranteeing a proper seal.

The straight jaw pliers are used when there are no obstructions to hinder crimping.

The notched jaw pliers are for use in tight quarters. Use the side or the front of the pliers to complete the crimp.

Hydraulic Hose Reel RackThis sturdy and convenient rack stores three reels of hose.


Dimensions: 30" deep by 28" wide by 72" high

Ratcheting Pliers Product Number: 7369-5503

Straight Jaw Pliers Product Number: 7369-5502

Notched Jaw Pliers Product Number: 7369-5501

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


EQUIPMENT

■ MobileCrimp® 4-20Pre-drilled holes in mounting shelf (item #2 below) allows easy mounting of either the Positive Stop or Digital Dial MobileCrimp 4-20 crimper.Safety Hints:If the MobileCrimp 4-20 is mounted on top of the cabinet, you must:

• Use crimper mounting shelf (item #2 below)• Bolt shelf and cabinet to wall using pre-drilled holes• Not use the caster leg set

■ Mounting Shelf for MC 4-20 CrimperProduct No. 7484-0013

■ Coupling Cabinet with Four Sliding Shelves (Two Shown)Product No. 7484-0010Shelves slide out for easy access and can hold a combination of ten 3-1/2" wide bin boxes or five7" wide bin boxes. Unit can be stacked and bolted together as shown in illustration. Each measures 41" wide by 21" high by 12" deep.Safety Hint:Slide open only one shelf at a time to avoid tipping.

■ Stationary Legs (Shown)Product No. 7484-0011Allows for precise leveling.

He avy-Duty Caster Leg Set (Not Shown) Product No. 7484-0012 Set consists of four heavy-duty casters, two of which can be locked.

■ Bin BoxesOrder separately in whatever combination best fits your needs. Dividers come with each bin box. Each bin box has slots to allow for maximum utilization.

Description Product No.

Ten 3.5" wide bins with 30 dividers 7484-0014Five 7" wide bins with 15 dividers 7484-0015Three dividers for 3.5" wide bin box 7484-0016Four dividers for 7" wide bin box 7484-0017

Two-Drawer Coupling CabinetProduct No. 7484-0021This two-drawer cabinet is ideal to add nylon air brake tubing couplings to your hydraulic inventory. This cabinet can be stacked and bolted together with your existing hydraulic cabinet. Uses the same bin boxes as listed above. Measures 41" wide by 11" high by 12" deep.

Hydraulic Coupling CabinetCustomized to fit all your needs!

1

2

3

4

5When assembled, the typical

combination of two four-shelf

coupling cabinets and stationary

leg set as shown measures

48" high by 41" wide by 12" deep.

Now even more versatile, these easy-to-assemble units are compactly designed to give you years of reliable service. Components are ordered individually by product number for easy customization.

1

2

54

3

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Gates Hose Cutter Model 2-24For two-wire braid hose through 1-1/2" ID.

Product Number: 7480-6600Clean Easy Cuts – Safe Operation

FEATURES:■ Cuts up to 1-1/2" I.D. two-wire braid reinforced hose.

■ Designed to operate on standard 20 amp service.

■ Reversible 8" scalloped-edge, high-speed steel blade with 5/8" bore can be sharpened.

■ Radius hose feed into blade for safety and reduced friction.

■ Inner blade guard for safe operation.

SPECIFICATIONSPower Source: 1-1/2 HP (2.6 HP Peak), 115V, 60 Hz.,15 Amp motor with power cord and plug.

Dimensions: 13" wide by 24" length by 17" high.

Weight: 65 lbs.

Replacement BladeProduct Number: 7793-0113

Work BenchProduct Number: 7484-0020Dimensions: 36" wide by 24" deep by 36" tallThis new hydraulic work bench is ideal for holding either the Power Crimp® 707 or MobileCrimp® 4-20 crimpers as well as hydraulic saws. The lower shelf can be used for storage or as shown with the pump. It is made of an angle iron frame construction with a high-density fiberboard top and welded 13-gauge steel lower shelf. All hardware is included to allow for easy assembly in about 10 minutes.

FOR SAFETY’S SAKE

Hydraulic Coupling BinProduct Number: 7484-0007The 24-bin cabinet is constructed of heavy gauge steel.Cabinet measures 34" wide by 24" high by 12" deep.Excellent for storing large 1-1/4" to 2" I.D. couplings.

Coupling Bin BoxesBin boxes for hydraulic couplings. Corrugated cardboard design gives extra strength. Includes four dividers per box.

Product Number: 7484-0008Measures: 5" wide by 4-1/2" high by 11" deep.

Product Number: 7484-0009Measures: 7-1/2" wide by 4-1/2" high by 11" deep.

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


EQUIPMENT

Gates Hose Cutter Model 6-32For six-wire spiral and two-wire braid hose through 2" I.D.Product Number: 7480-6597

Clean Easy Cuts – Safe Operation

FEATURES:■ Cuts up to 2" I.D. two-wire braid through six-spiral

reinforced hose.

■ Reversible 10" scalloped-edge, high-speed steel blade with 3/4" bore, can be sharpened.

■ Radius hose feed into blade for safety and reduced friction.

■ Inner blade guard for safe operation.

■ Includes Coolant Spray System Kit for reduced heat in high-capacity cutting applications (recommended for multi-braid and spiral reinforced hose). Kit includes reservoir, spray nozzle and mounting hardware.

■ Power cord not included.

SPECIFICATIONS

Power Source: 3 HP (5.2 HP Peak), Single phase, 230V, 60 Hz., 20 Amp motorDimensions: 22" wide by 42" length by 24" high

Weight: 215 lbs.


Gates Power Cutter 208Product Number: 7480-6609

Effortless Straight Cuts Every Time■ Clear face shield for added safety.

■ Powerful high torque, 4.5 horsepower peak motor that makes cut-ting faster and easier.

■ Includes scalloped, 12" blade to dissipate heat, reducing friction for clean, faster cuts up to 1-1/4" I.D.

■ Optional abrasive blade for continuous use with 1-1/4" I.D and larger spiral-wire reinforced hose.

■ Safely cuts two and four-wire hoses through 2", six-wire hoses through 1-1/4".

■ Reversible blade can be sharpened; removal and installation is easy.

■ Cuts small 3/16" I.D. hose and handles the tough jobs, including 2" I.D. spiral wire hoses.*

■ Easy to use, front face plate with moveable pins holds hose securely for a clean straight cut.

■ Sturdy blade guard shields blade for safety.

■ Permanent mounting brackets (included) to attach saw to table.* Optional abrasive blade preferred for cutting spiral-wire hose, larger than 1-1/4" I.D.

CUTTER SPECIFICATIONSShaft/Arbor Hole Diameter: 1"Power Source: 4.5 HP Peak, 115/50/60 Hz, 20 Amps. No Load Speed: 3,500 rpmDimensions: 22-1/2" wide by 18-1/4" length by 23-1/2" high

Weight: 65 lbs.

BLADE SPECIFICATIONSBlade Dimensions: 12" by 1/8"

Scalloped ReplacementProduct Number: 7482-0983

Optional AbrasiveProduct Number: 7482-0426

Caution: Keep blade sharp. Heat generated by a dull blade can damage steel and flare the hose.

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Hand-Held Hose CutterProduct Number: 7469-0153

Makes clean cuts—no ragged edges. Cuts most non-metal reinforced rubber hoses. Excellent for cutting textile-reinforced hose.

FEATURES:■ Lightweight with nylon handles.■ Blade closes into handle for safety.■ Cutter and blades packaged individually on shrink-wrapped cards.


Small Nylon Tubing Cutter & Replacement BladesProduct Number: 7208-40105

Tubing cutter gives straight, clean, square cuts on J844 tubing.

FEATURES:■ Lightweight and compact size – 3/4" by 3". ■ Designed to ensure user's safety.■ "Blade guard" offers more protection against accidental blade contact.■ Handle has ribs for improved grip.

Replacement Blade Product Number: 7208-40205

Gates also offers replacement blades in a five pack bag.

4-16 Portable Hose SawSPECIFICATIONSVoltage: 120 VoltsCycle: 60 Hz / 1 phasePower: 6.5 AmpNo-load speed: 7,400 rpmWheel size: 6"Arbor Hole: 7/8"

FEATURES:■ Cuts up to 1", four-wire braid■ Abrasive cut-off wheel


Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


EQUIPMENT

Gates HS-1 Hand SwagerProduct Number: 7483-1000

Produces top quality assemblies using Gates 1/8" and 3/16" thermoplastic hydraulic hose with Gates PCTS couplings and Gates C14 PTFE hose and couplings.

Simply insert the assembly into the swager from the bottom, place dies around the coupling, and pump the handle.

A six-ton jack then goes to work and the swage is completed. Positive dies ensure a correct swage every time.

The perfectly swaged assembly is removed and you are ready to repeat the process.

Pushers and dies must be ordered separately.

SPECIFICATIONS

Dimensions: 15" wide by 7" deep by 19-1/2" high

Weight: 41 lbs.

Collar

Adapter

Rod

Spacer Ring

Cone

Swager Conversion Kit for the Power Crimp® 707Produces top quality assemblies using Gates 1/8" and 3/16" thermoplastic hydraulic hose with Gates PCTS couplings and Gates C14 PTFE hose and couplings. Easily converts the Power Crimp 707 to a power swager.

Description Product Number

Complete Kit 7480-0040

Collar 7482-0429

Die Cone 7482-0430

Adapter 7482-0433

Actuator Rod 7482-0482

1/2" Spacer Ring 7482-1253

Dies and pushers must be ordered separately. See Swage Data Chart in Gates Crimp Data Manual for details.

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Push-On Tool Product Number: 7480-0100

This hand-operated coupling machine, made of rugged cast iron and steel construction, eliminates the hard work of manually pushing stems into hoses.

It comes complete with mandrels for 1/4", 3/8", 1/2", 5/8" and 3/4" I.D. sizes of lock-on couplings.

Hose Assembly Machine Power Mate 25Portable hose assembly machine for field attachable couplings.

Machine Product Number: 7480-0029(115 volts, 30 amps, 1 phase, 60 cycles.)

Folding Stand Product Number: 7480-0030 ■ Produces complete, dependable hose assemblies.■ Applies field attachable couplings in sizes from 3/16"

through 2" I.D. on medium and high-pressure hoses.■ Accommodates male pipe, swivel, flange and elbow

type field attachable couplings.■ Easy and safe to operate.■ Hand-skiving tool can be used with Power Mate 25.■ Affords quick and simple operation—reduces costly

downtime and delays.■ Heavy-duty—provides years of trouble-free service.■ Weighs 141 lbs. (without stand). Takes up less than

4 by 5 ft. of floor space with stand.■ Can be bench mounted or made portable with folding

leg stand.

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


EQUIPMENT

C14 Hose Cutting Shear Recommended for C14 PTFE HoseProduct Number: 7480-6596

This cutting shear handles Gates C14 PTFE hose up through 1" without requiring pretaping of the hose. The shear is fast and easy to use and results in a very clean cut.

Weight: 18 lbs.Dimensions: 9" wide by 15" high by 14" deep. 30" handle.

xxxxx xx x

x xxxx

xxxx

xxx xxx

xxxx

Hand-Operated Hose Perforator ToolThese hose perforators have needle-studded wooden rollers which perforate the covers of non-skive wire braid hose used in high pressure inert gas applications. They are hand-operated so the operator can control the degree of perforation in the hose cover.

1-1/4" Hose Perforator for 3/16" to 3/4" I.D. Hose Product Number: 7482-6565

Dimensions: 2-1/2" O.D. roller by 1-1/4" wide by 8" OAL.

Weight: 3/4 lbs.

3" Hose Perforator for 1" to 2" I.D. Hose Product Number: 7482-6566

Dimensions: 3-3/4" O.D. roller by 3" wide by 9-1/2" OAL.

Weight: 1-1/4 lbs.

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


C14 Hose Insertion Die Holder for Use with Hose Insertion DiesRequired for inserting hose into ferrule on all sizes. Use the fixture (see photo) to mount the Hose Insertion Die Holder onto a bench top to aid in the assembly of Gates C14 hose. Each item listed in the table below must be ordered separately. See product numbers listed in Gates Crimp Data and Dies Manual.Description Product Number

Hose Insertion Die Holder 7483-0510Hose Insertion Fixture 7483-0511

C14 Hose Insertion DiesUsed to guide the hose into the ferrule when used with the Hose Insertion Die Holder. One set required for each hose size. See product numbers listed in Gates Crimp Data and Dies Manual.

C14 Hose ExpandersUsed to expand the hose and round out the tube after cutting and to insert the stem into the hose. One expander required for each hose size. See product numbers listed in Gates Crimp Data and Dies Manual.

C14 Swage PushersSpecially designed to accommodate Gates C14 couplings. They protect the threads and bottom out on the dies to complete the swage. Use the C14 Swage Data Chart in Gates Crimp Data and Dies Manual to determine the proper pushers.

C14 Swage DiesSpecifically designed to swage Gates C14 hose assemblies. They provide the required swage dimensions to meet full performance. One die set is required for each hose size. See product numbers listed in Gates Crimp Data and Dies Manual.

MegaCrimp® Coupling Insertion ToolProduct Number: 7482-1342

Offers an easy way to confirm the right insertion depth for all Gates wire-braid hydraulic hoses.

To use, simply insert the hose into its proper slot indicated by dash size, push it all the way in, check for square cut (maximum allowable angle of cut is five degrees), then mark the insertion depth on the hose.

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


EQUIPMENT

MegaClean™ SystemUsed to remove dirt from the inside out with the help of pressur-ized launchers and compatible nozzles. Gates MegaClean foam projectiles sweep through the inside surface of the hose, taking fine particles of loose dirt and other contaminants with them. At 20–30 percent larger than the hose ID, these projectiles leave nothing behind but a hose that truly is clean from the inside out.

How it works:

Step 1

Step 2

(continues next page)

MegaClean MC-K32 KitProduct Number 7467-0001

• MCL-32 Hand Launcher (Including "Rotary" Plug & Coupler)• MC-GAR-1 Adapter Ring (-4 thru -20) • LC32 Carrying & Storage Case• Hose Nozzles GH-04, GH-05, GH-06, GH-08, GH-10, GH-12,

GH-16, GH-20, GH-24, GH-32• JIC Assembly Nozzles GA-04, GA-06, GA-08, GA-10, GA-12,

GA-16, GA-20, GA-24, GA-32• GA-04-FFORX Nozzle• MC-32 Launcher Stand• 1 Projectile Catcher Bucket• 1 Roll MegaClean Assembly Tape• 1 Bag of Projectiles Listed in Chart Below

MegaClean MC-K20 KitProduct Number 7467-0002

• MCL-20 Hand Launcher• Female Quick-Release Coupler• LC20 Carrying & Storage Case• Hose Nozzles GH-04, GH-05, GH-06, GH-08, GH-10, GH-12,

GH-16, GH-20 • 1 Projectile Catcher Bucket• 1 Roll MegaClean Assembly Tape• 1 Bag of Projectiles Listed in Chart Below

MegaClean Projectiles Included in KitsProduct Number Part Number MC-K32 MC-K20 Bag Quantity

7467-50005 HAP-04 X X 100

7467-50025 HP-04 X X 100

7467-50035 HAP-06 X X 100

7467-50045 HP-06 X X 100

7467-50055 HAP-08 X X 100

7467-50065 HP-08 X X 100

7467-50075 HP-08-1 X X 50

7467-50085 HP-10 X X 50

7467-50105 HP-12 X X 50

7467-50135 HP-16 X X 40

7467-50155 HP-20 X X 30

7467-50175 HP-24 X 20

7467-50195 HP-32 X 15

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


DescriptionProduct Number

Part Number

MegaClean HAP-04-01 Assembly Projectile (100 ea) 7467-50005 MC-HAP-04-1

MegaClean HAP-04 Assembly Projectile (100 ea) 7467-50015 MC-HAP-04

MegaClean HP-04 Hose Projectile (100 ea) 7467-50025 MC-HP-04





MegaClean HP-08-1 Hose Projectile (50 ea) 7467-50075 MC-HP-08-1


















Description – Bulk PackProduct Number

Part Number

MegaClean HAPB-04-01 Assembly Projectile Bulk (10000 ea) 7467-5000 MC-HAPB-04-1

MegaClean HAPB-04 Assembly Projectile Bulk (10000 ea) 7467-5001 MC-HAPB-04

MegaClean HAPB-04 Assembly Projectile Bulk (10000 ea) 7467-5002 MC-HPB-04


MegaClean HPB-06 Hose Projectile Bulk (10000 ea) 7467-5004 MC-HPB-06



MegaClean HPB-08-1 Hose Projectile Bulk (9000 ea) 7467-5007 MC-HPB-08-1














MegaClean™ System Replacement Projectiles

Step 3

Step 4

Step 5

Step 6

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


EQUIPMENT

MegaClean™ SystemUsed to remove dirt from the inside out with the help of pressurized launchers and compatible nozzles. Gates MegaClean foam projectiles sweep through the inside surface of the hose, taking fine particles of loose dirt and other contaminants with them. At 20–30 percent larger than the hose ID, these projectiles leave nothing behind but a hose that truly is clean from the inside out.

DescriptionProduct Number

Part Number

MegaClean Starter Kit-K40-64 7467-0000 MC-K40-64

MegaClean Starter Kit-32 7467-0001 MC-K32

MegaClean Starter Kit-20 7467-0002 MC-K20

MegaClean Bench Mount Kit-20 7467-0003 MC-BM20

MegaClean L-32 Hand Launcher 7467-1000 MC-L32



MegaClean Male Quick Release Rotary Plug 7467-2000 MC-MQRP

MegaClean Female Quick Coupler for Launcher 7467-2001 MC-FQRC

MegaClean LC32 (Case Only) 7467-1003 MC-LC32



MegaClean Projectile Catcher Bucket 7467-1006 MC-PCB

MegaClean Assembly Tape 7467-1007 MC-TAPE

MegaClean Launcher Stand 32 & 64 7467-1008 MC-LSTAND

MegaClean Adapter Ring GAR-1 for MCL-32 (-2 thru-20) 7467-2003 MC-GAR-1

MegaClean Adapter Ring GAR-1 for MCL64 (-2 thru-20) 7467-2004 MC-GAR-2

MegaClean Adapter Ring GAR-1 for MCL64 (-24 and-32) 7467-2005 MC-GAR-3

MegaClean GH-04 Hose Nozzle 7467-3000 MC-GH-04










MegaClean GH-40 to GH-64 Hose Nozzle Assortment 7467-3010 MC-GH-40-64

MegaClean GT-02 Tube Nozzle 7467-3011 MC-GT-02

MegaClean GA-04 JIC Assembly Nozzle 7467-3012 MC-GA-04



MegaClean GA-06 JIC Assembly Nozzle 7467-3015 MC-GA-06


MegaClean GA-08 Assembly JIC Nozzle or Tube 7467-3017 MC-GA-08








MegaClean GA-04 FFORX Flat Face Nozzle 7467-3025 MC-GA-04-FFORX

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


BELT PREVENTIVE MAINTENANCE TOOLS

Preventive Maintenance ToolsProper tension, installation and maintenance can extend belt life and reduce costly downtime. Some of Gates most popular preven-tive maintenance tools include:

A. Sonic Tension Meter, Model 507CProduct - No. 7420-0507For extremely accurate belt tension measuring, the Gates Sonic Tension Meter is an electronic device that measures the natural frequency of a free stationary belt span and instantly computes the static belt tension based upon the belt span length, belt width, and belt type. The Sonic Tension Meter can be used with synchro-nous and V-belts. Other features include: Output readings can be switched between pounds, kilograms, newtons and hertz. Auto gain control automatically adjusts meter sensitivity. Auto frequency range filters for background noise. Frequency range from 10 - 5,000 Hz.

B. Krikit GaugesProduct No. 7401-0071For tensioning automotive V-belts up to and including 7/8" top width.Product No. 7401-0072For tensioning automotive V-ribbed belts up to 8 ribs in width.

C. Pencil Type Tension TesterProduct No. 7401-0076Maximum deflection force: 30 lbs. For use with all small V-belts and synchronous belts.

D. Double Barrel Tension TesterProduct No. 7401-0075Maximum deflection force: 60 lbs. For use with all multiple V-belts and large synchronous belts.

E. Five Barrel Tension TesterProduct No. 7401-0079Maximum deflection force: 165 lbs. For use with all multiple V-belts and large synchronous belts.

Sonic Tension Meter and AccessoriesProduct No. Description

7420-0205 Flat Flexible Sensor

7420-0206 Cord Sensor

7420-0208 A/C Adapter for 305 Series

7420-0212 Inductive Sensor (Magnets Included)

7420-0507 Sonic Tension Meter Model 507C

Preventive Maintenance ToolsProduct No. Description

9975-0002 PM Kit

7420-2000 Belt Installation and Maint. Tool Box

F. EZ Align Precision Laser Alignment DeviceProduct No. 7420-1000 -Red LaserIdentifies common types of pulley misalignment.

Product No. 7420-3000 - Green LaserIdentifies common types of pulley misalignment.

G. Truflex and PoweRated Belt Length FinderProduct No. 7401-0012Measures FHP belts up to 107" to determine equivalent Truflex or PoweRated belt numbers.

H. Sheave GaugesProduct No. 7401-0013 and 7401-0014Helps to identify worn sheaves and damaged belts.

Tensioning and Alignment DevicesProduct No. Description

7401-0012 Truflex and PoweRated Belt Length Finder

7401-0013 Sheave Gauge - Metric

7401-0014 Sheave Gauge - English

7401-0071 Krikit Belt Tension Tester

7401-0072 Krikit II Belt Tension Tester

7401-0075 66 Lb. Double Barrel

7401-0076 30 Lb. Pencil Type

7401-0079 165 Lb. Five Barrel

7420-1000 EZ Align Laser Alignment Device - Red Laser

7420-3000 EZ Align Laser Alignment Device - Green Laser

A

G

H

B

C D E

F

Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


POLY CHAIN® GT® CARBON™ BELTS

Poly Chain® GT® Carbon™ BeltsPoly Chain GT Carbon Belts — Nothing Tougher.Give yourself a competitive advantage by designing in the Gates Poly Chain GT Carbon drive system instead of roller chain in your next power transmission appli-cation.The patented use of Carbon Fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness and increased flexibility, allowing the use of backside idlers. When combined with Gates Poly Chain GT2 sprockets, you have a lightweight, long-lasting, mainte-nance-free system that's more than a match for roller chain.

Markets/ApplicationsAll industrial markets, especially suited to replace roller chain drives. Narrow width minimizes reducer overhung loads and left-justified hubs on Poly Chain GT2 sprockets accommodate short shaft lengths.

Features/Advantages■ Maintenance-free, clean solution for roller chain drive conversion • Significantly reduces maintenance costs • Equivalent capacity to roller chain drives in the same width • Easy rust-free wash-down with Gates Stainless Steel hardware • Fast drive conversion payback • Quieter than roller chain drives■ New construction provides up to 55% more low-speed capacity than the original PCGT construction and 30% more than PCGT2.■ Gates curvilinear tooth profile provides high shear strength, noise reduction, and improved load carrying capacity.■ Robust carbon tensile cord combines minimal stretch with extraordinary strength and load carrying capacity, while absorbing shock

and surge loads.■ Durable polyurethane construction resists chemicals, oil, pollutants, and abrasion.■ Nylon tooth facing reduces friction and eliminates the need for lubrication.■ Fully operational in temperature extremes of -65°F to +185°F (-54°C to +85°C).Recommended SprocketsPoly Chain GT2 Sprockets - 8M and 14MNotesBelt pitch is the distance in millimeters between two adjacent tooth centers as measured on the pitch line of the belt. Belt pitch length is the total length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a Poly Chain GT Carbon belt lies within the tensile member.~Poly Chain GT Carbon belt part numbers are identical to those of Poly Chain GT2: part number 8MGT-1000-21 denotes an 8mm pitch, 1000mm pitch length and 21mm width.~Poly Chain GT Carbon belts can be used on existing drives as replacement for previous generation Poly Chain belts.WARNING: Use of non-Gates manufactured sprockets is not recommended: Gates Poly Chain GT2 sprockets are manufactured, specified and tested to fully support the full capabilities of the Poly Chain GT Carbon belt. Product performance cannot be guaranteed when non-Gates sprockets are used.Always utilize Taper-Lock® type Poly Chain GT2 Sprockets when designing a new Poly Chain GT Carbon belt drive system.

Poly Chain GT Carbon Belts — Nothing Tougher.

Give yourself a competitive advantage by designing in the GatesPoly Chain GT Carbon drive system instead of roller chain in yournext power transmission application.

The patented use of Carbon Fiber as the tensile cord in this beltprovides increased horsepower rating for greater power density andcompactness and increased flexibility, allowing the use of backsideidlers. When combined with Gates Poly Chain GT2 sprockets, youhave a lightweight, long-lasting, maintenance-free system that’smore than a match for roller chain.

Markets/ApplicationsAll industrial markets, especially suited to replace roller chain drives.Narrow width minimizes reducer overhung loads and left-justifiedhubs on Poly Chain GT2 sprockets accommodate short shaftlengths.

Features/Advantagesn Maintenance-free, clean solution for roller chain drive conversion

• Significantly reduces maintenance costs• Equivalent capacity to roller chain drives in the same width• Easy rust-free wash-down with Gates Stainless Steel or Nickel Plated hardware• Fast drive conversion payback• Quieter than roller chain drives

n New construction provides up to 55% more low-speed capacity than the original PCGT construction and 15%more than PCGT2.

n Gates curvilinear tooth profile provides high shear strength, noise reduction, and improved load carryingcapacity.

n Robust carbon tensile cord combines minimal stretch with extraordinary strength and load carrying capacity,while absorbing shock and surge loads.

n Durable polyurethane construction resists chemicals, oil, pollutants, and abrasion.n Nylon tooth facing reduces friction and eliminates the need for lubrication.n Fully operational in temperature extremes of -65°F to +185°F (-54°C to +85°C).Recommended SprocketsPoly Chain GT2 Sprockets - 8M and 14M

NotesPoly Chain GT Carbon belts can be used on existing drives as replacement for previous generation Poly Chain belts.Poly Chain GT Carbon belt part numbers are identical to those of Poly Chain GT2: part number 8MGT-1000-21 denotes an 8mm pitch,1000mm pitch length and 21mm width.Belt pitch is the distance in millimeters between two adjacent tooth centers as measured on the pitch line of the belt. Belt pitch length is thetotal length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a Poly Chain GT Carbon belt lies withinthe tensile member.

WARNING: Use of non-Gates manufactured sprockets is not recommended: Gates Poly Chain GT2 sprockets are manufactured, specifiedand tested to fully support the full capabilities of the Poly Chain GT Carbon belt. Product performance cannot be guaranteed when non-Gatessprockets are used.Always utilize Taper-Lock® type Poly Chain GT2 Sprockets when designing a new Poly Chain GT Carbon belt drive system.

Product No. Series 92748mm Pitch — 12mm Wide

PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

8MGT-640-12 9274-0080 80 25.20 .408MGT-720-12 9274-0090 90 28.35 .478MGT-800-12 9274-0100 100 31.50 .508MGT-896-12 9274-0112 112 35.28 .558MGT-960-12 9274-0120 120 37.80 .588MGT-1000-12 9274-0125 125 39.37 .608MGT-1040-12 9274-0130 130 40.95 .65

PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)


Industrial Belt ProductsJuly, 2010

Poly Chain® GT® Carbon™ Belts

2 www.gates.com/ptGates Corporation

POLY

CHAI

NBE

LTS

Poly Chain GT Carbon Belts — Nothing Tougher.

Give yourself a competitive advantage by designing in the GatesPoly Chain GT Carbon drive system instead of roller chain in yournext power transmission application.

The patented use of Carbon Fiber as the tensile cord in this beltprovides increased horsepower rating for greater power density andcompactness and increased flexibility, allowing the use of backsideidlers. When combined with Gates Poly Chain GT2 sprockets, youhave a lightweight, long-lasting, maintenance-free system that’smore than a match for roller chain.

Markets/ApplicationsAll industrial markets, especially suited to replace roller chain drives.Narrow width minimizes reducer overhung loads and left-justifiedhubs on Poly Chain GT2 sprockets accommodate short shaftlengths.

Features/Advantagesn Maintenance-free, clean solution for roller chain drive conversion

• Significantly reduces maintenance costs• Equivalent capacity to roller chain drives in the same width• Easy rust-free wash-down with Gates Stainless Steel or Nickel Plated hardware• Fast drive conversion payback• Quieter than roller chain drives

n New construction provides up to 55% more low-speed capacity than the original PCGT construction and 15%more than PCGT2.

n Gates curvilinear tooth profile provides high shear strength, noise reduction, and improved load carryingcapacity.

n Robust carbon tensile cord combines minimal stretch with extraordinary strength and load carrying capacity,while absorbing shock and surge loads.

n Durable polyurethane construction resists chemicals, oil, pollutants, and abrasion.n Nylon tooth facing reduces friction and eliminates the need for lubrication.n Fully operational in temperature extremes of -65°F to +185°F (-54°C to +85°C).Recommended SprocketsPoly Chain GT2 Sprockets - 8M and 14M

NotesPoly Chain GT Carbon belts can be used on existing drives as replacement for previous generation Poly Chain belts.Poly Chain GT Carbon belt part numbers are identical to those of Poly Chain GT2: part number 8MGT-1000-21 denotes an 8mm pitch,1000mm pitch length and 21mm width.Belt pitch is the distance in millimeters between two adjacent tooth centers as measured on the pitch line of the belt. Belt pitch length is thetotal length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a Poly Chain GT Carbon belt lies withinthe tensile member.

WARNING: Use of non-Gates manufactured sprockets is not recommended: Gates Poly Chain GT2 sprockets are manufactured, specifiedand tested to fully support the full capabilities of the Poly Chain GT Carbon belt. Product performance cannot be guaranteed when non-Gatessprockets are used.Always utilize Taper-Lock® type Poly Chain GT2 Sprockets when designing a new Poly Chain GT Carbon belt drive system.

Product No. Series 92748mm Pitch — 12mm Wide

PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)


PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)





POLY

CHAI

NBE

LTS

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

8MGT-1792-12 9274-0224 224 70.55 1.008MGT-2000-12 9274-0250 250 78.74 1.108MGT-2200-12 9274-0275 275 86.61 1.158MGT-2240-12 9274-0280 280 88.19 1.208MGT-2400-12 9274-0300 300 94.49 1.308MGT-2520-12 9274-0315 315 99.21 1.358MGT-2600-12 9274-0325 325 102.36 1.408MGT-2800-12 9274-0350 350 110.24 1.50

PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)


8mm Pitch — 21mm Wide

PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

8MGT-640-21 9274-1080 80 25.20 .408MGT-720-21 9274-1090 90 28.35 .458MGT-800-21 9274-1100 100 31.50 .508MGT-896-21 9274-1112 112 35.28 .538MGT-960-21 9274-1120 120 37.80 .588MGT-1000-21 9274-1125 125 39.37 .608MGT-1040-21 9274-1130 130 40.95 .658MGT-1120-21 9274-1140 140 44.09 .708MGT-1200-21 9274-1150 150 47.24 .758MGT-1224-21 9274-1153 153 48.19 .758MGT-1280-21 9274-1160 160 50.39 .808MGT-1440-21 9274-1180 180 56.69 .908MGT-1600-21 9274-1200 200 62.99 1.008MGT-1760-21 9274-1220 220 69.29 1.158MGT-1792-21 9274-1224 224 70.55 1.15

PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

8MGT-2000-21 9274-1250 250 78.74 1.258MGT-2200-21 9274-1275 275 86.61 1.388MGT-2240-21 9274-1280 280 88.19 1.408MGT-2400-21 9274-1300 300 94.49 1.508MGT-2520-21 9274-1315 315 99.21 1.608MGT-2600-21 9274-1325 325 102.36 1.658MGT-2800-21 9274-1350 350 110.24 1.758MGT-2840-21 9274-1355 355 111.81 1.808MGT-3048-21 9274-1381 381 120.00 1.908MGT-3200-21 9274-1400 400 125.98 2.058MGT-3280-21 9274-1410 410 129.13 2.108MGT-3600-21 9274-1450 450 141.73 2.258MGT-4000-21 9274-1500 500 157.48 2.558MGT-4400-21 9274-1550 550 173.23 2.758MGT-4480-21 9274-1560 560 176.38 2.80


PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

8MGT-640-36 9274-2080 80 25.20 .708MGT-720-36 9274-2090 90 28.35 .758MGT-800-36 9274-2100 100 31.50 .808MGT-896-36 9274-2112 112 35.28 .908MGT-960-36 9274-2120 120 37.80 .978MGT-1000-36 9274-2125 125 39.37 1.008MGT-1040-36 9274-2130 130 40.95 1.028MGT-1120-36 9274-2140 140 44.09 1.108MGT-1200-36 9274-2150 150 47.24 1.128MGT-1224-36 9274-2153 153 48.19 1.208MGT-1280-36 9274-2160 160 50.39 1.258MGT-1440-36 9274-2180 180 56.69 1.358MGT-1600-36 9274-2200 200 62.99 1.458MGT-1760-36 9274-2220 220 69.29 1.608MGT-1792-36 9274-2224 224 70.55 1.65

PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

8MGT-2000-36 9274-2250 250 78.74 1.708MGT-2200-36 9274-2275 275 86.61 1.888MGT-2240-36 9274-2280 280 88.19 1.908MGT-2400-36 9274-2300 300 94.49 2.008MGT-2520-36 9274-2315 315 99.21 2.158MGT-2600-36 9274-2325 325 102.36 2.308MGT-2800-36 9274-2350 350 110.24 2.408MGT-2840-36 9274-2355 355 111.81 2.508MGT-3048-36 9274-2381 381 120.00 2.628MGT-3200-36 9274-2400 400 125.98 2.708MGT-3280-36 9274-2410 410 129.13 2.728MGT-3600-36 9274-2450 450 141.73 2.958MGT-4000-36 9274-2500 500 157.48 3.258MGT-4400-36 9274-2550 550 173.23 3.558MGT-4480-36 9274-2560 560 176.38 3.60


PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

8MGT-640-62 9274-3080 80 25.20 .808MGT-720-62 9274-3090 90 28.35 1.008MGT-800-62 9274-3100 100 31.50 1.088MGT-896-62 9274-3112 112 35.28 1.208MGT-960-62 9274-3120 120 37.80 1.258MGT-1000-62 9274-3125 125 39.37 1.308MGT-1040-62 9274-3130 130 40.95 1.35

PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

8MGT-1120-62 9274-3140 140 44.09 1.408MGT-1200-62 9274-3150 150 47.24 1.758MGT-1224-62 9274-3153 153 48.19 1.658MGT-1280-62 9274-3160 160 50.39 1.708MGT-1440-62 9274-3180 180 56.69 1.858MGT-1600-62 9274-3200 200 62.99 2.008MGT-1760-62 9274-3220 220 69.29 2.10


Poly Chain® GT® Carbon™ BeltsProduct No. Series 9274 (continued)8mm Pitch — 12mm Wide (continued)

www.gates.com/pt 3The Driving Force in Power Transmission.

POLYCHAIN

BELTS

Poly Chain® GT® Carbon™ Belts Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


POLY CHAIN® GT® CARBON™ BELTS

PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)


PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)



PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

14MGT-994-20 9274-4071 71 39.13 1.3014MGT-1120-20 9274-4080 80 44.09 1.3514MGT-1190-20 9274-4085 85 46.85 1.4014MGT-1260-20 9274-4090 90 49.61 1.4514MGT-1400-20 9274-4100 100 55.12 1.5514MGT-1568-20 9274-4112 112 61.73 1.6514MGT-1610-20 9274-4115 115 63.39 1.7014MGT-1750-20 9274-4125 125 68.90 1.7514MGT-1890-20 9274-4135 135 74.41 1.7514MGT-1960-20 9274-4140 140 77.17 1.8014MGT-2100-20 9274-4150 150 82.68 1.9014MGT-2240-20 9274-4160 160 88.19 1.9814MGT-2310-20 9274-4165 165 90.95 2.0514MGT-2380-20 9274-4170 170 93.70 2.10

PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

14MGT-2450-20 9274-4175 175 96.46 2.1514MGT-2520-20 9274-4180 180 99.21 2.2014MGT-2590-20 9274-4185 185 101.97 2.2014MGT-2660-20 9274-4190 190 104.72 2.2514MGT-2800-20 9274-4200 200 110.24 2.3014MGT-3136-20 9274-4224 224 123.46 2.5014MGT-3304-20 9274-4236 236 130.08 2.5514MGT-3360-20 9274-4240 240 132.28 2.6014MGT-3500-20 9274-4250 250 137.80 2.7014MGT-3850-20 9274-4275 275 151.58 2.8514MGT-3920-20 9274-4280 280 154.33 2.9514MGT-4326-20 9274-4309 309 170.32 3.1514MGT-4410-20 9274-4315 315 173.62 3.20


PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)


PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)



PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

14MGT-994-68 9274-6071 71 39.13 2.4014MGT-1120-68 9274-6080 80 44.09 2.6014MGT-1190-68 9274-6085 85 46.85 2.7014MGT-1260-68 9274-6090 90 49.61 2.8014MGT-1400-68 9274-6100 100 55.12 3.0014MGT-1568-68 9274-6112 112 61.73 3.2514MGT-1610-68 9274-6115 115 63.39 3.4014MGT-1750-68 9274-6125 125 68.90 3.6014MGT-1890-68 9274-6135 135 74.41 3.95

PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

14MGT-1960-68 9274-6140 140 77.17 4.0014MGT-2100-68 9274-6150 150 82.68 4.2014MGT-2240-68 9274-6160 160 88.19 4.5014MGT-2310-68 9274-6165 165 90.95 4.7014MGT-2380-68 9274-6170 170 93.70 4.7014MGT-2450-68 9274-6175 175 96.46 4.8514MGT-2520-68 9274-6180 180 99.21 4.9014MGT-2590-68 9274-6185 185 101.97 5.0014MGT-2660-68 9274-6190 190 104.72 5.15




POLY

CHAI

NBE

LTS


Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

14MGT-2800-68 9274-6200 200 110.24 5.2014MGT-3136-68 9274-6224 224 123.46 5.8014MGT-3304-68 9274-6236 236 130.08 6.0514MGT-3360-68 9274-6240 240 132.28 6.1014MGT-3500-68 9274-6250 250 137.80 6.30

PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)

14MGT-3850-68 9274-6275 275 151.58 6.8014MGT-3920-68 9274-6280 280 154.33 7.0014MGT-4326-68 9274-6309 309 170.32 7.7014MGT-4410-68 9274-6315 315 173.62 7.85


PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)


PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)



PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)


PartNo.

ProductNo.

No. ofTeeth

PitchLength

(In.)

Wt.Ea.

(Lbs.)





POLYCHAIN

BELTS

Poly Chain® GT® Carbon™ Belts Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


SUPER HC® BELTS

Pioneered by Gates, these "narrow" cross-sections can transmitup to three times the horsepower of the classical cross-sections(A, B, C, and D) in the same amount of drive space.

Markets/ApplicationsSuitable for all industrial applications, particularly where space,weight and horsepower capacity are critical.

Features/Advantagesn Gates Curves provide proper cord support and full contact

with the sheave-groove for uniform loading, uniform wear, andincreased belt life.

n Flex-Bonded Cords are strongly bonded to the body of thebelt resulting in equal load distribution and the absorption ofbending stress without cord deterioration.

n The Flex-Weave® Cover is a patented construction for longercover life, providing extended protection to the core of the beltfrom oil, dirt, and heat.

n Meets RMA oil and heat resistant standards.n Meets RMA static conductivity requirements.Recommended SheavesSuper HC Sheaves

NotesGates Super HC belts are available in 3V, 5V, and 8V cross-sections.

Product No. Series 93323V Section

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

3V250 9332-0250 25.0 .12 103V265 9332-0265 26.5 .12 103V280 9332-0280 28.0 .13 103V300 9332-0300 30.0 .14 103V315 9332-0315 31.5 .15 103V335 9332-0335 33.5 .16 103V355 9332-0355 35.5 .17 103V375 9332-0375 37.5 .17 103V400 9332-0400 40.0 .19 103V420 9332-0420 42.0 .20 1503V425 9332-0425 42.5 .20 103V450 9332-0450 45.0 .21 103V475 9332-0475 47.5 .22 103V500 9332-0500 50.0 .24 103V530 9332-0530 53.0 .25 103V560 9332-0560 56.0 .26 103V590 9332-0590 59.0 .25 503V600 9332-0600 60.0 .28 103V630 9332-0630 63.0 .30 10

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

3V650 9332-0650 65.0 .31 1003V670 9332-0670 67.0 .32 103V710 9332-0710 71.0 .62 103V730 9332-0730 73.0 .34 103V750 9332-0750 75.0 .35 103V800 9332-0800 80.0 .38 103V810 9332-0810 81.0 .38 763V830 9332-0830 83.0 .39 103V850 9332-0850 85.0 .40 103V900 9332-0900 90.0 .43 103V950 9332-0950 95.0 .45 103V1000 9332-1000 100.0 .47 103V1060 9332-1060 106.0 .50 103V1120 9332-1120 112.0 .53 103V1180 9332-1180 118.0 .56 103V1250 9332-1250 125.0 .59 103V1320 9332-1320 132.0 .62 103V1400 9332-1400 140.0 .66 10


SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

5V500 9334-0500 50.0 .65 105V530 9334-0530 53.0 .73 105V560 9334-0560 56.0 .77 10

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

5V600 9334-0600 60.0 .80 105V630 9334-0630 63.0 .82 105V670 9334-0670 67.0 .89 10


Super HC® Belts


HEAV

YDU

TYV-

BELT

S

Super HC® Belts

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

5V710 9334-0710 71.0 .93 105V750 9334-0750 75.0 1.00 105V800 9334-0800 80.0 1.05 105V850 9334-0850 85.0 1.10 105V900 9334-0900 90.0 1.20 105V950 9334-0950 95.0 1.25 105V1000 9334-1000 100.0 1.32 105V1060 9334-1060 106.0 1.40 105V1120 9334-1120 112.0 1.50 105V1180 9334-1180 118.0 1.55 105V1250 9334-1250 125.0 1.64 105V1320 9334-1320 132.0 1.74 105V1400 9334-1400 140.0 1.82 105V1500 9334-1500 150.0 2.00 105V1600 9334-1600 160.0 2.10 105V1630 9334-1630 163.0 2.15 26

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

5V1700 9334-1700 170.0 2.25 105V1710 9334-1710 171.0 2.25 265V1800 9334-1800 180.0 2.35 105V1900 9334-1900 190.0 2.50 105V2000 9334-2000 200.0 2.60 105V2120 9334-2120 212.0 2.80 105V2240 9334-2240 224.0 2.95 105V2360 9334-2360 236.0 3.10 105V2500 9334-2500 250.0 3.30 105V2650 9334-2650 265.0 3.50 55V2800 9334-2800 280.0 3.70 55V3000 9334-3000 300.0 3.98 55V3150 9334-3150 315.0 4.20 55V3350 9334-3350 335.0 4.40 55V3550 9334-3550 355.0 4.70 5


SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

8V1000 9336-1000 100.0 3.30 58V1060 9336-1060 106.0 3.55 58V1120 9336-1120 112.0 3.80 58V1180 9336-1180 118.0 4.00 58V1250 9336-1250 125.0 4.10 58V1320 9336-1320 132.0 4.45 58V1400 9336-1400 140.0 4.75 58V1500 9336-1500 150.0 5.15 58V1600 9336-1600 160.0 5.45 58V1700 9336-1700 170.0 5.85 58V1800 9336-1800 180.0 6.15 58V1900 9336-1900 190.0 6.40 48V2000 9336-2000 200.0 6.90 48V2120 9336-2120 212.0 7.35 48V2240 9336-2240 224.0 7.50 48V2300 9336-2300 230.0 7.85 4

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

8V2360 9336-2360 236.0 7.95 38V2500 9336-2500 250.0 8.50 38V2650 9336-2650 265.0 9.00 38V2800 9336-2800 280.0 9.45 38V3000 9336-3000 300.0 10.45 38V3150 9336-3150 315.0 10.85 38V3350 9336-3350 335.0 11.40 18V3550 9336-3550 355.0 12.15 18V3750 9336-3750 375.0 12.90 18V4000 9336-4000 400.0 13.70 18V4250 9336-4250 425.0 14.65 18V4500 9336-4500 450.0 15.40 18V4750 9336-4750 475.0 16.29 18V5000 9336-5000 500.0 17.10 18V5600 9336-5600 560.0 19.10 18V6000 9336-6000 600.0 20.50 1


Super HC® BeltsProduct No. Series 9334 (continued)5V Section (continued)


HEAVYDUTY

V-BELTS

Super HC® Belts Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


SUPER HC® BELTS

Constructed with Gates proprietary construction, this belt has asuperior combination of flex and load carrying capacity, as well astransmitting more horsepower than the classical cross sections inthe same amount of drive space.

Markets/ApplicationsSuitable for all industrial applications, particularly where space,weight and horsepower capacity are critical.

Features/Advantages■Notches molded into the belt during manufacturing make this

belt well suited for drives with smaller diameter sheaves.■Belt Edge is machined for even sheave groove contact resulting

in less slip and wear.■Flex-Bonded Cords are strongly bonded to the body of the belt

■Patented EPDM Material construction provides -60˚F to +250˚Ftemperature range to resist belt cracking.

resulting in equal load distribution and the absorption of bendingstress without cord deterioration.

■Meets RMA oil and heat resistant standards.■Meets RMA static conductivity requirements.Recommended SheavesSuper HC SheavesNotes: Gates Super HC Molded Notch belts are available in 3VX and 5VX cross-sections.

Product No. Series 94123VX Section

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

3VX250 9412-0250 25.0 .11 103VX265 9412-0265 26.5 .12 103VX280 9412-0280 28.0 .13 103VX290 9412-0290 29.0 .13 1043VX300 9412-0300 30.0 .13 103VX315 9412-0315 31.5 .14 103VX326 9412-0326 32.6 .14 1073VX335 9412-0335 33.5 .14 103VX350 9412-0350 35.0 .17 103VX355 9412-0355 35.5 .15 103VX366 9412-0366 36.6 .16 103VX375 9412-0375 37.5 .16 103VX385 9412-0385 38.5 .16 103VX390 9412-0390 39.0 .16 1073VX400 9412-0400 40.0 .17 103VX415 9412-0415 41.5 .17 103VX425 9412-0425 42.5 .18 103VX450 9412-0450 45.0 .19 103VX464 9412-0464 46.4 .20 103VX475 9412-0475 47.5 .20 103VX487 9412-0487 48.7 .20 1073VX500 9412-0500 50.0 .20 103VX520 9412-0520 52.0 .21 103VX530 9412-0530 53.0 .21 103VX540 9412-0540 54.0 .22 103VX550 9412-0550 55.0 .22 103VX560 9412-0560 56.0 .23 103VX570 9412-0570 57.0 .23 103VX580 9412-0580 58.0 .23 10

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

3VX590 9412-0590 59.0 .24 103VX600 9412-0600 60.0 .24 103VX616 9412-0616 61.6 .25 1003VX630 9412-0630 63.0 .25 103VX650 9412-0650 65.0 .26 103VX670 9412-0670 67.0 .27 103VX690 9412-0690 69.0 .27 103VX710 9412-0710 71.0 .28 103VX750 9412-0750 75.0 .29 103VX771 9412-0771 77.1 .30 103VX800 9412-0800 80.0 .31 103VX826 9412-0826 82.6 .32 103VX850 9412-0850 85.0 .33 103VX900 9412-0900 90.0 .35 103VX926 9412-0926 92.6 .35 103VX950 9412-0950 95.0 .37 103VX974 9412-0974 97.4 .37 543VX1000 9412-1000 100.0 .38 103VX1027 9412-1027 102.7 .39 103VX1060 9412-1060 106.0 .41 103VX1088 9412-1088 108.8 .42 543VX1120 9412-1120 112.0 .43 103VX1146 9412-1146 114.6 .44 543VX1180 9412-1180 118.0 .45 103VX1224 9412-1224 122.4 .47 103VX1250 9412-1250 125.0 .47 103VX1296 9412-1296 129.6 .49 543VX1320 9412-1320 132.0 .50 103VX1400 9412-1400 140.0 .53 10


Super HC® Molded Notch Belts


HEAV

YDU

TYV-

BELT

S


Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

5VX350 9414-0350 35.0 .36 105VX362 9414-0362 36.2 .37 685VX372 9414-0372 37.2 .38 685VX382 9414-0382 38.2 .40 685VX392 9414-0392 39.2 .40 685VX402 9414-0402 40.2 .41 685VX412 9414-0412 41.2 .42 685VX422 9414-0422 42.2 .43 685VX433 9414-0433 43.3 .45 685VX450 9414-0450 45.0 .46 105VX459 9414-0459 45.9 .46 685VX470 9414-0470 47.0 .48 105VX479 9414-0479 47.9 .49 345VX490 9414-0490 49.0 .50 105VX500 9414-0500 50.0 .51 105VX510 9414-0510 51.0 .52 105VX519 9414-0519 51.9 .54 345VX530 9414-0530 53.0 .54 105VX540 9414-0540 54.0 .55 105VX550 9414-0550 55.0 .56 105VX560 9414-0560 56.0 .57 105VX570 9414-0570 57.0 .58 105VX580 9414-0580 58.0 .59 105VX590 9414-0590 59.0 .60 105VX600 9414-0600 60.0 .60 105VX610 9414-0610 61.0 .61 105VX619 9414-0619 61.9 .62 105VX630 9414-0630 63.0 .64 105VX650 9414-0650 65.0 .66 105VX660 9414-0660 66.0 .66 105VX670 9414-0670 67.0 .68 105VX680 9414-0680 68.0 .68 105VX690 9414-0690 69.0 .68 105VX700 9414-0700 70.0 .70 105VX710 9414-0710 71.0 .71 105VX720 9414-0720 72.0 .72 105VX730 9414-0730 73.0 .74 105VX740 9414-0740 74.0 .75 105VX750 9414-0750 75.0 .76 105VX760 9414-0760 76.0 .76 105VX769 9414-0769 76.9 .77 405VX780 9414-0780 78.0 .78 105VX790 9414-0790 79.0 .80 105VX800 9414-0800 80.0 .81 10

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

5VX810 9414-0810 81.0 .82 105VX830 9414-0830 83.0 .83 105VX840 9414-0840 84.0 .84 105VX850 9414-0850 85.0 .85 105VX860 9414-0860 86.0 .86 105VX867 9414-0867 86.7 .86 345VX880 9414-0880 88.0 .89 105VX890 9414-0890 89.0 .90 105VX900 9414-0900 90.0 .90 105VX918 9414-0918 91.8 .92 105VX930 9414-0930 93.0 .93 105VX940 9414-0940 94.0 .93 105VX950 9414-0950 95.0 .95 105VX960 9414-0960 96.0 .96 105VX978 9414-0978 97.8 .98 105VX990 9414-0990 99.0 .98 105VX1000 9414-1000 100.0 1.00 105VX1017 9414-1017 101.7 1.02 105VX1030 9414-1030 103.0 1.03 105VX1050 9414-1050 105.0 1.05 105VX1060 9414-1060 106.0 1.06 105VX1080 9414-1080 108.0 1.07 105VX1108 9414-1108 110.8 1.10 105VX1120 9414-1120 112.0 1.11 105VX1139 9414-1139 113.9 1.14 105VX1150 9414-1150 115.0 1.14 105VX1160 9414-1160 116.0 1.15 105VX1162 9414-1162 116.2 1.15 105VX1180 9414-1180 118.0 1.17 105VX1220 9414-1220 122.0 1.20 105VX1230 9414-1230 123.0 1.22 105VX1250 9414-1250 125.0 1.24 105VX1277 9414-1277 127.7 1.27 105VX1320 9414-1320 132.0 1.30 105VX1374 9414-1374 137.4 1.36 105VX1400 9414-1400 140.0 1.38 105VX1469 9414-1469 146.9 1.46 105VX1500 9414-1500 150.0 1.48 105VX1600 9414-1600 160.0 1.56 105VX1700 9414-1700 170.0 1.67 105VX1701 9414-1701 170.1 1.67 105VX1800 9414-1800 180.0 1.78 105VX1900 9414-1900 190.0 1.88 105VX2000 9414-2000 200.0 1.95 10




HEAVYDUTY

V-BELTS

Super HC® Molded Notch Belts Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


SUPER HC® BELTS


SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

8VX1000 9516-1000 100.0 2.69 108VX1060 9516-1060 106.0 2.85 108VX1120 9516-1120 112.0 3.01 108VX1180 9516-1180 118.0 3.17 108VX1250 9516-1250 125.0 3.36 108VX1320 9516-1320 132.0 3.55 108VX1400 9516-1400 140.0 3.77 5

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

8VX1500 9516-1500 150.0 4.04 58VX1600 9516-1600 160.0 4.30 58VX1700 9516-1700 170.0 4.57 58VX1800 9516-1800 180.0 4.84 58VX1900 9516-1900 190.0 5.11 58VX2000 9516-2000 200.0 5.38 5




HEAV

YDU

TYV-

BELT

S


53/64

1

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


PREDATOR® BELTS

Specifically designed for aggressive applications, this extraheavy-duty belt construction provides extraordinary high impactstrength, capacity, and wear resistance.

Markets/ApplicationsPredator belts are well suited as replacement belts forapplications exposed to pulsating loads or heavy shock loads,such as mining, agriculture, wood processing, oil field equipment,heavy construction and sand/gravel operations.

Features/Advantagesn Aramid Tensile Cords combine limited stretch with

extraordinary strength and durability that is pound-for-poundstronger than steel.

n Bareback Cover resists debris and allows the belt to slip underextreme shock load conditions, reducing heat buildup andprolonging belt life.

n Gates Curves provide proper cord support and full contactwith the sheave-groove for equal loading, uniform wear, andincreased belt life.

n Meets RMA oil and heat resistant standards.NotesPredator belts do not meet RMA requirements for belt static conductivity.When application requires Predator belt sets, request belts with same group/match number.

Product No. Series 9185AP Section

PartNo.

ProductNo.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

AP31 9185-0031 33.0 .24AP33 9185-0033 35.0 .26AP35 9185-0035 37.0 .27AP38 9185-0038 40.0 .29AP40 9185-0040 42.0 .31AP42 9185-0042 44.0 .32AP43 9185-0043 45.0 .33AP44 9185-0044 46.0 .34AP45 9185-0045 47.0 .35AP46 9185-0046 48.0 .35AP47 9185-0047 49.0 .36AP48 9185-0048 50.0 .37AP50 9185-0050 52.0 .38AP51 9185-0051 53.0 .39AP52 9185-0052 54.0 .40AP53 9185-0053 55.0 .40AP54 9185-0054 56.0 .41

PartNo.

ProductNo.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

AP55 9185-0055 57.0 .42AP56 9185-0056 58.0 .43AP58 9185-0058 60.0 .44AP59 9185-0059 61.0 .45AP60 9185-0060 62.0 .46AP61 9185-0061 63.0 .46AP62 9185-0062 64.0 .47AP63 9185-0063 65.0 .48AP64 9185-0064 66.0 .48AP66 9185-0066 68.0 .50AP68 9185-0068 70.0 .51AP70 9185-0070 72.0 .53AP71 9185-0071 73.0 .54AP85 9185-0085 87.0 .64AP87 9185-0087 89.0 .65AP90 9185-0090 92.0 .68AP91 9185-0091 93.0 .69

Product No. Series 9186BP Section

PartNo.

ProductNo.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

BP32 9186-0032 35.0 .39BP38 9186-0038 41.0 .46BP40 9186-0040 43.0 .48BP42 9186-0042 45.0 .50BP44 9186-0044 47.0 .53

PartNo.

ProductNo.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

BP46 9186-0046 49.0 .55BP48 9186-0048 51.0 .57BP50 9186-0050 53.0 .59BP51 9186-0051 54.0 .61BP52 9186-0052 55.0 .62


Predator® Single Belts


HEAV

YDU

TYV-

BELT

S

Predator® Single Belts Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


PREDATOR® BELTS

PartNo.

ProductNo.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

BP53 9186-0053 56.0 .63BP54 9186-0054 57.0 .64BP55 9186-0055 58.0 .65BP56 9186-0056 59.0 .66BP57 9186-0057 60.0 .67BP58 9186-0058 61.0 .68BP59 9186-0059 62.0 .69BP60 9186-0060 63.0 .71BP61 9186-0061 64.0 .72BP62 9186-0062 65.0 .73BP63 9186-0063 66.0 .74BP64 9186-0064 67.0 .75BP65 9186-0065 68.0 .76BP66 9186-0066 69.0 .77BP68 9186-0068 71.0 .80BP70 9186-0070 73.0 .82BP71 9186-0071 74.0 .83BP75 9186-0075 78.0 .87BP78 9186-0078 81.0 .91BP80 9186-0080 83.0 .93

PartNo.

ProductNo.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

BP81 9186-0081 84.0 .94BP83 9186-0083 86.0 .96BP85 9186-0085 88.0 .99BP90 9186-0090 93.0 1.04BP93 9186-0093 96.0 1.08BP95 9186-0095 98.0 1.10BP97 9186-0097 100.0 1.12BP100 9186-0100 103.0 1.15BP103 9186-0103 106.0 1.19BP105 9186-0105 108.0 1.21BP108 9186-0108 111.0 1.24BP112 9186-0112 115.0 1.29BP120 9186-0120 123.0 1.38BP124 9186-0124 127.0 1.42BP128 9186-0128 131.0 1.47BP136 9186-0136 139.0 1.56BP144 9186-0144 147.0 1.65BP158 9186-0158 161.0 1.80BP173 9186-0173 176.0 1.97BP195 9186-0195 198.0 2.22

Product No. Series 9187CP Section

PartNo.

ProductNo.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

CP85 9187-0085 89.0 1.86CP90 9187-0090 94.0 1.96CP96 9187-0096 100.0 2.09CP99 9187-0099 103.0 2.15CP100 9187-0100 104.0 2.17CP105 9187-0105 109.0 2.27CP112 9187-0112 116.0 2.42CP120 9187-0120 124.0 2.59CP128 9187-0128 132.0 2.75

PartNo.

ProductNo.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

CP136 9187-0136 140.0 2.92CP144 9187-0144 148.0 3.09CP158 9187-0158 162.0 3.38CP162 9187-0162 166.0 3.46CP173 9187-0173 177.0 3.69CP180 9187-0180 184.0 3.84CP195 9187-0195 199.0 4.15CP240 9187-0240 242.0 5.05

Product No. Series 91885VP Section

PartNo.

ProductNo.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

5VP800 9188-0080 80.0 1.025VP850 9188-0085 85.0 1.085VP900 9188-0090 90.0 1.155VP950 9188-0095 95.0 1.215VP1000 9188-0100 100.0 1.285VP1060 9188-0106 106.0 1.355VP1120 9188-0112 112.0 1.435VP1180 9188-0118 118.0 1.505VP1250 9188-0125 125.0 1.595VP1320 9188-0132 132.0 1.685VP1400 9188-0140 140.0 1.795VP1500 9188-0150 150.0 1.915VP1600 9188-0160 160.0 2.045VP1700 9188-0170 170.0 2.17

PartNo.

ProductNo.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

5VP1800 9188-0180 180.0 2.305VP1900 9188-0190 190.0 2.425VP2000 9188-0200 200.0 2.555VP2120 9188-0212 212.0 2.705VP2240 9188-0224 224.0 2.865VP2360 9188-0236 236.0 3.015VP2500 9188-0250 250.0 3.195VP2650 9188-0265 265.0 3.385VP2800 9188-0280 280.0 3.575VP3000 9188-0300 300.0 3.835VP3150 9188-0315 315.0 4.025VP3350 9188-0335 335.0 4.275VP3550 9188-0355 355.0 4.53


Predator® Single BeltsProduct No. Series 9186 (continued)BP Section (continued)


HEAVYDUTY

V-BELTS


Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



PartNo.

ProductNo.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

8VP1600 9189-0160 160.0 5.298VP1700 9189-0170 170.0 7.008VP1800 9189-0180 180.0 5.958VP1900 9189-0190 190.0 6.288VP2000 9189-0200 200.0 6.618VP2120 9189-0212 212.0 7.008VP2240 9189-0224 224.0 7.408VP2360 9189-0236 236.0 7.80

PartNo.

ProductNo.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

8VP2500 9189-0250 250.0 8.268VP2650 9189-0265 265.0 8.758VP2800 9189-0280 280.0 9.258VP3000 9189-0300 300.0 9.918VP3150 9189-0315 315.0 11.108VP3350 9189-0335 335.0 11.078VP3550 9189-0355 355.0 11.73

Product No. Series 9190SPBP Section

PartNo.

ProductNo.

PitchLength(mm)

Wt.Ea.

(Lbs.)

SPB1260P 9190-01260 1260 .66SPB1500P 9190-01500 1500 .79SPB1600P 9190-01600 1600 .84SPB1700P 9190-01700 1700 .90SPB1800P 9190-01800 1800 .95SPB1900P 9190-01900 1900 1.00SPB2000P 9190-02000 2000 1.05SPB2120P 9190-02120 2120 1.12SPB2240P 9190-02240 2240 1.18SPB2360P 9190-02360 2360 1.24SPB2500P 9190-02500 2500 1.32SPB2650P 9190-02650 2650 1.40SPB2800P 9190-02800 2800 1.48SPB3000P 9190-03000 3000 1.58SPB3150P 9190-03150 3150 1.66SPB3350P 9190-03350 3350 1.77

PartNo.

ProductNo.

PitchLength(mm)

Wt.Ea.

(Lbs.)

SPB3550P 9190-03550 3550 1.87SPB3750P 9190-03750 3750 1.98SPB4000P 9190-04000 4000 2.11SPB4250P 9190-04250 4250 2.24SPB4500P 9190-04500 4500 2.37SPB4750P 9190-04750 4750 2.50SPB5000P 9190-05000 5000 2.64SPB5300P 9190-05300 5300 2.79SPB5600P 9190-05600 5600 2.95SPB6000P 9190-06000 6000 3.16SPB6300P 9190-06300 6300 3.32SPB6700P 9190-06700 6700 3.53SPB7100P 9190-07100 7100 3.74SPB7500P 9190-07500 7500 3.96SPB8000P 9190-08000 8000 4.22




HEAV

YDU

TYV-

BELT

S

Predator® Single Belts Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


PREDATOR® BELTS

Product No. Series 9191SPCP Section

PartNo.

ProductNo.

PitchLength(mm)

Wt.Ea.

(Lbs.)

SPC2000P 9191-02000 2000 1.91SPC2120P 9191-02120 2120 2.03SPC2240P 9191-02240 2240 2.14SPC2360P 9191-02360 2360 2.26SPC2500P 9191-02500 2500 2.39SPC2650P 9191-02650 2650 2.53SPC2800P 9191-02800 2800 2.68SPC3000P 9191-03000 3000 2.87SPC3150P 9191-03150 3150 3.01SPC3350P 9191-03350 3350 3.20SPC3550P 9191-03550 3550 3.39SPC3750P 9191-03750 3750 3.58SPC4000P 9191-04000 4000 3.82SPC4250P 9191-04250 4250 4.06

PartNo.

ProductNo.

PitchLength(mm)

Wt.Ea.

(Lbs.)

SPC4500P 9191-04500 4500 4.30SPC4750P 9191-04750 4750 4.54SPC5000P 9191-05000 5000 4.78SPC5300P 9191-05300 5300 5.07SPC5600P 9191-05600 5600 5.35SPC6000P 9191-06000 6000 5.73SPC6300P 9191-06300 6300 6.02SPC6700P 9191-06700 6700 6.40SPC7100P 9191-07100 7100 6.79SPC7500P 9191-07500 7500 7.17SPC8000P 9191-08000 8000 7.65SPC8500P 9191-08500 8500 8.12SPC9000P 9191-09000 9000 8.60




HEAVYDUTY

V-BELTS


Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Specifically designed for aggressive applications, this extraheavy-duty belt construction provides extraordinary high impactstrength, capacity, and wear resistance.

Markets/ApplicationsPredator belts are well suited as replacement belts for applicationsexposed to pulsating loads or heavy shock loads, such as mining,agriculture, wood processing, oil field equipment, heavyconstruction and sand/gravel operations.

Features/Advantages■Aramid Tensile Cords combine limited stretch with

extraordinary strength and durability that is pound-for-poundstronger than steel.

■Bareback Cover resists debris and allows the belt to slip underextreme shock load conditions, reducing heat buildup andprolonging belt life.

■Multiple layer Tie Band provides excellent lateral rigidity toprevent belts from turning over or from coming off of the drive.

■Gates Curves provide proper cord support and full contact withthe sheave-groove for equal loading, uniform wear, and increased belt life.

■Meets RMA oil and heat resistant standards.

Size Range/Availability■Large Inventory of standard lengths and widths are readily available. See sizing table for details.■Belt Slitters located onsite at several Gates Service Centers can cut down an existing belt in inventory to the

strand width needed.■Made-To-Order Belt Lengths are available in any size from: CP (80 to 400 inch), 3VP (45 to 220 inch),

5VP (50 to 660 inch) and 8VP (100 to 660 inch). Check with Customer Service for minimum order quantityand manufacturing lead time.

Recommended SheavesSuper HC Sheaves as recommended by DesignFlex® Pro drive analysis.

NotesWhen application requires Predator PowerBand belt sets, request same group/match number.Predator belts do not meet RMA requirements for belt static conductivity.

Belt part number is constructed by placing the (#) number of strands required followed by a slash (/) in front of the belt size.For Example, 5/3VP800 represents a 3VP800 with 5 joined strands.

Belt product number is 8 or 9 digits constructed of product series prefix, number of strands, and belt length.For example, 91805080 represents a "3VP" section PowerBand (9180) with 5 strands (5) that is 80.0 inches (080) long.

Product No. Series 9184CP Section

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

3/CP85 9184-3085 89.0 6.783/CP90 9184-3090 94.0 7.113/CP99 9184-3099 103.0 8.104/CP240 9184-4240 242.0 21.194/CP330 9184-4330 332.0 29.08

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

4/CP345 9184-4345 347.0 30.394/CP360 9184-4360 362.0 31.705/CP195 9184-5195 199.0 21.795/CP225 9184-5225 227.0 24.855/CP255 9184-5255 257.0 28.13

CP Predator® belts are available up to 12 strands.


Predator® PowerBand® Belts


HEAV

YDU

TYV-

BELT

S

Predator® PowerBand® Belts Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


PREDATOR® BELTS


Size(# = strands)

BeltO.C.(In.)

Wt. PerStrand(Lbs.)

Belt Width In Number of Strands

2Strand

3Strand

4Strand

5Strand

6Strand

7Strand

8Strand

9Strand

10Strand

9180- 9180- 9180- 9180- 9180- 9180- 9180- 9180- 9180-

#/3VP450 45.0 .28 2045 3045 4045 5045 6045 7045 8045 9045 10045#/3VP475 47.5 .29 2047 3047 4047 5047 6047 7047 8047 9047 10047#/3VP500 50.0 .30 2050 3050 4050 5050 6050 7050 8050 9050 10050#/3VP530 53.0 .33 2053 3053 4053 5053 6053 7053 8053 9053 10053#/3VP560 56.0 .34 2056 3056 4056 5056 6056 7056 8056 9056 10056#/3VP600 60.0 .37 2060 3060 4060 5060 6060 7060 8060 9060 10060#/3VP630 63.0 .40 2063 3063 4063 5063 6063 7063 8063 9063 10063#/3VP670 67.0 .41 2067 3067 4067 5067 6067 7067 8067 9067 10067#/3VP710 71.0 .44 2071 3071 4071 5071 6071 7071 8071 9071 10071#/3VP750 75.0 .46 2075 3075 4075 5075 6075 7075 8075 9075 10075#/3VP800 80.0 .50 2080 3080 4080 5080 6080 7080 8080 9080 10080#/3VP850 85.0 .53 2085 3085 4085 5085 6085 7085 8085 9085 10085#/3VP900 90.0 .56 2090 3090 4090 5090 6090 7090 8090 9090 10090#/3VP950 95.0 .60 2095 3095 4095 5095 6095 7095 8095 9095 10095#/3VP1000 100.0 .63 2100 3100 4100 5100 6100 7100 8100 9100 10100#/3VP1060 106.0 .66 2106 3106 4106 5106 6106 7106 8106 9106 10106#/3VP1120 112.0 .70 2112 3112 4112 5112 6112 7112 8112 9112 10112#/3VP1180 118.0 .74 2118 3118 4118 5118 6118 7118 8118 9118 10118#/3VP1250 125.0 .79 2125 3125 4125 5125 6125 7125 8125 9125 10125#/3VP1320 132.0 .83 2132 3132 4132 5132 6132 7132 8132 9132 10132#/3VP1400 140.0 .88 2140 3140 4140 5140 6140 7140 8140 9140 10140


Size(# = strands)

BeltO.C.(In.)

Wt. PerStrand(Lbs.)

Belt Width In Number of Strands 13 to 16Strand

Maximum(## = strands)

2Strand

3Strand

4Strand

5Strand

6Strand

7Strand

8Strand

9Strand

10Strand

11Strand

12Strand

9181- 9181- 9181- 9181- 9181- 9181- 9181- 9181- 9181- 9181- 9181- 9181-

#/5VP600 60.0 .96 2060 3060 4060 5060 6060 7060 8060 9060 10060 11060 12060 ##060#/5VP630 63.0 1.00 2063 3063 4063 5063 6063 7063 8063 9063 10063 11063 12063 ##063#/5VP670 67.0 1.04 2067 3067 4067 5067 6067 7067 8067 9067 10067 11067 12067 ##067#/5VP710 71.0 1.18 2071 3071 4071 5071 6071 7071 8071 9071 10071 11071 12071 ##071#/5VP750 75.0 1.21 2075 3075 4075 5075 6075 7075 8075 9075 10075 11075 12075 ##075#/5VP800 80.0 1.25 2080 3080 4080 5080 6080 7080 8080 9080 10080 11080 12080 ##080#/5VP850 85.0 1.36 2085 3085 4085 5085 6085 7085 8085 9085 10085 11085 12085 ##085#/5VP870 87.0 1.40 2087 3087 4087 5087 6087 7087 8087 9087 10087 11087 12087 ##087#/5VP900 90.0 1.39 2090 3090 4090 5090 6090 7090 8090 9090 10090 11090 12090 ##090#/5VP950 95.0 1.50 2095 3095 4095 5095 6095 7095 8095 9095 10095 11095 12095 ##095#/5VP1000 100.0 1.57 2100 3100 4100 5100 6100 7100 8100 9100 10100 11100 12100 ##100#/5VP1060 106.0 1.25 2106 3106 4106 5106 6106 7106 8106 9106 10106 11106 12106 ##106#/5VP1120 112.0 1.79 2112 3112 4112 5112 6112 7112 8112 9112 10112 11112 12112 ##112#/5VP1180 118.0 1.86 2118 3118 4118 5118 6118 7118 8118 9118 10118 11118 12118 ##118#/5VP1250 125.0 2.00 2125 3125 4125 5125 6125 7125 8125 9125 10125 11125 12125 ##125#/5VP1320 132.0 2.11 2132 3132 4132 5132 6132 7132 8132 9132 10132 11132 12132 ##132#/5VP1400 140.0 2.25 2140 3140 4140 5140 6140 7140 8140 9140 10140 11140 12140 ##140#/5VP1500 150.0 2.39 2150 3150 4150 5150 6150 7150 8150 9150 10150 11150 12150 ##150#/5VP1600 160.0 2.57 2160 3160 4160 5160 6160 7160 8160 9160 10160 11160 12160 ##160#/5VP1700 170.0 2.75 2170 3170 4170 5170 6170 7170 8170 9170 10170 11170 12170 ##170#/5VP1800 180.0 2.89 2180 3180 4180 5180 6180 7180 8180 9180 10180 11180 12180 ##180#/5VP1900 190.0 3.07 2190 3190 4190 5190 6190 7190 8190 9190 10190 11190 12190 ##190#/5VP2000 200.0 3.25 2200 3200 4200 5200 6200 7200 8200 9200 10200 11200 12200 ##200#/5VP2030 203.0 3.30 2203 3203 4203 5203 6203 7203 8203 9203 10203 11203 12203 ##203#/5VP2120 212.0 3.46 2212 3212 4212 5212 6212 7212 8212 9212 10212 11212 12212 ##212#/5VP2240 224.0 3.68 2224 3224 4224 5224 6224 7224 8224 9224 10224 11224 12224 ##224#/5VP2360 236.0 3.89 2236 3236 4236 5236 6236 7236 8236 9236 10236 11236 12236 ##236#/5VP2500 250.0 4.07 2250 3250 4250 5250 6250 7250 8250 9250 10250 11250 12250 ##250#/5VP2650 265.0 4.32 2265 3265 4265 5265 6265 7265 8265 9265 10265 11265 12265 ##265#/5VP2800 280.0 4.57 2280 3280 4280 5280 6280 7280 8280 9280 10280 11280 12280 ##280#/5VP3000 300.0 4.89 2300 3300 4300 5300 6300 7300 8300 9300 10300 11300 12300 ##300#/5VP3150 315.0 5.18 2315 3315 4315 5315 6315 7315 8315 9315 10315 11315 12315 ##315#/5VP3350 335.0 5.50 2335 3335 4335 5335 6335 7335 8335 9335 10335 11335 12335 ##335#/5VP3550 355.0 5.79 2355 3355 4355 5355 6355 7355 8355 9355 10355 11355 12355 ##355




HEAVYDUTY

V-BELTS


Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts



Size(# = strands)

BeltO.C.(In.)

Wt. PerStrand(Lbs.)


2Strand

3Strand

4Strand

5Strand

6Strand

7Strand

8Strand

9Strand

10Strand

11Strand

12Strand

9182- 9182- 9182- 9182- 9182- 9182- 9182- 9182- 9182- 9182- 9182-

#/8VP1000 100.0 3.90 2100 3100 4100 5100 6100 7100 8100 9100 10100 11100 12100#/8VP1060 106.0 4.15 2106 3106 4106 5106 6106 7106 8106 9106 10106 11106 12106#/8VP1120 112.0 4.42 2112 3112 4112 5112 6112 7112 8112 9112 10112 11112 12112#/8VP1180 118.0 4.67 2118 3118 4118 5118 6118 7118 8118 9118 10118 11118 12118#/8VP1250 125.0 5.00 2125 3125 4125 5125 6125 7125 8125 9125 10125 11125 12125#/8VP1320 132.0 5.25 2132 3132 4132 5132 6132 7132 8132 9132 10132 11132 12132#/8VP1400 140.0 5.58 2140 3140 4140 5140 6140 7140 8140 9140 10140 11140 12140#/8VP1500 150.0 6.00 2150 3150 4150 5150 6150 7150 8150 9150 10150 11150 12150#/8VP1600 160.0 6.33 2160 3160 4160 5160 6160 7160 8160 9160 10160 11160 12160#/8VP1700 170.0 6.75 2170 3170 4170 5170 6170 7170 8170 9170 10170 11170 12170#/8VP1800 180.0 7.25 2180 3180 4180 5180 6180 7180 8180 9180 10180 11180 12180#/8VP1900 190.0 7.65 2190 3190 4190 5190 6190 7190 8190 9190 10190 11190 12190#/8VP2000 200.0 8.00 2200 3200 4200 5200 6200 7200 8200 9200 10200 11200 12200#/8VP2120 212.0 8.50 2212 3212 4212 5212 6212 7212 8212 9212 10212 11212 12212#/8VP2240 224.0 9.00 2224 3224 4224 5224 6224 7224 8224 9224 10224 11224 12224#/8VP2360 236.0 9.42 2236 3236 4236 5236 6236 7236 8236 9236 10236 11236 12236#/8VP2500 250.0 10.00 2250 3250 4250 5250 6250 7250 8250 9250 10250 11250 12250#/8VP2650 265.0 10.58 2265 3265 4265 5265 6265 7265 8265 9265 10265 11265 12265#/8VP2800 280.0 11.33 2280 3280 4280 5280 6280 7280 8280 9280 10280 11280 12280#/8VP3000 300.0 12.08 2300 3300 4300 5300 6300 7300 8300 9300 10300 11300 12300#/8VP3150 315.0 12.75 2315 3315 4315 5315 6315 7315 8315 9315 10315 11315 12315#/8VP3350 335.0 13.58 2335 3335 4335 5335 6335 7335 8335 9335 10335 11335 12335#/8VP3550 355.0 14.33 2355 3355 4355 5355 6355 7355 8355 9355 10355 11355 12355#/8VP3750 375.0 15.08 2375 3375 4375 5375 6375 7375 8375 9375 10375 11375 12375#/8VP4000 400.0 16.08 2400 3400 4400 5400 6400 7400 8400 9400 10400 11400 12400#/8VP4250 425.0 17.08 2425 3425 4425 5425 6425 7425 8425 9425 10425 11425 12425#/8VP4500 450.0 18.08 2450 3450 4450 5450 6450 7450 8450 9450 10450 11450 12450#/8VP4750 475.0 19.17 2475 3475 4475 5475 6475 7475 8475 9475 10475 11475 12475#/8VP5000 500.0 20.17 2500 3500 4500 5500 6500 7500 8500 9500 10500 11500 12500#/8VP5600 560.0 22.75 2560 3560 4560 5560 6560 7560 8560 9560 10560 11560 12560#/8VP6000 600.0 24.42 2600 3600 4600 5600 6600 7600 8600 9600 10600 11600 12600




HEAV

YDU

TYV-

BELT

S

Predator® PowerBand® Belts Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


HI-POWER® II BELTS

Featuring a composite, multi-purpose construction, these beltsresist oil and heat, ozone, sunlight, weather, and aging.

Markets/ApplicationsSuitable for all industrial applications, including v-flat drives.

Features/Advantagesn Gates Curves provide proper cord support and full contact with

the sheave-groove for uniform loading, uniform wear, andincreased belt life.

n Flex-Bonded Cords are strongly bonded to the body of the beltresulting in equal load distribution and the absorption of bendingstress without cord deterioration.

n The Flex-Weave® Cover is a patented fabric construction forlonger cover life, providing extended protection to the belt corefrom oil, dirt and heat.

n Meets RMA oil and heat resistant standards.n Meets RMA static conductivity requirements.Recommended SheavesMulti-Duty® Sheaves

NotesGates Hi-Power belts are available in A, B, C, D and E cross sections.

Product No. Series 9002A Section

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

A20 9002-2020 22.0 .12 250A21 9002-2021 23.0 .13 250A22 9002-2022 24.0 .13 250A23 9002-2023 25.0 .14 185A24 9002-2024 26.0 .15 10A25 9002-2025 27.0 .17 10A26 9002-2026 28.0 .17 10A27 9002-2027 29.0 .17 10A28 9002-2028 30.0 .18 10A29 9002-2029 31.0 .19 10A29.8 9002-2298 31.8 .20 10A30 9002-2030 32.0 .20 10A31 9002-2031 33.0 .21 10A32 9002-2032 34.0 .22 10A33 9002-2033 35.0 .22 10A34 9002-2034 36.0 .23 10A35 9002-2035 37.0 .23 10A36 9002-2036 38.0 .24 10A37 9002-2037 39.0 .25 10A38 9002-2038 40.0 .26 10A39 9002-2039 41.0 .26 10A40 9002-2040 42.0 .27 10A41 9002-2041 43.0 .27 10A42 9002-2042 44.0 .27 10A43 9002-2043 45.0 .29 10A44 9002-2044 46.0 .29 10A45 9002-2045 47.0 .30 10A46 9002-2046 48.0 .30 10A47 9002-2047 49.0 .31 10A48 9002-2048 50.0 .31 10A49 9002-2049 51.0 .32 10A50 9002-2050 52.0 .33 10A51 9002-2051 53.0 .33 10

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

A52 9002-2052 54.0 .34 10A53 9002-2053 55.0 .35 10A54 9002-2054 56.0 .36 10A55 9002-2055 57.0 .37 10A56 9002-2056 58.0 .38 10A57 9002-2057 59.0 .38 10A58 9002-2058 60.0 .39 10A59 9002-2059 61.0 .40 10A60 9002-2060 62.0 .40 10A61 9002-2061 63.0 .41 10A62 9002-2062 64.0 .41 10A63 9002-2063 65.0 .42 10A64 9002-2064 66.0 .43 10A65 9002-2065 67.0 .44 10A66 9002-2066 68.0 .45 10A67 9002-2067 69.0 .45 10A68 9002-2068 70.0 .46 10A69 9002-2069 71.0 .47 10A70 9002-2070 72.0 .47 10A71 9002-2071 73.0 .48 10A72 9002-2072 74.0 .48 10A73 9002-2073 75.0 .50 10A74 9002-2074 76.0 .51 10A75 9002-2075 77.0 .51 10A76 9002-2076 78.0 .52 10A77 9002-2077 79.0 .53 10A78 9002-2078 80.0 .54 10A79 9002-2079 81.0 .54 10A80 9002-2080 82.0 .54 10A81 9002-2081 83.0 .55 10A82 9002-2082 84.0 .56 10A83 9002-2083 85.0 .56 10A84 9002-2084 86.0 .58 10


Hi-Power® II Belts


HEAVYDUTY

V-BELTS

Hi-Power® II Belts

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

A85 9002-2085 87.0 .58 10A86 9002-2086 88.0 .59 10A87 9002-2087 89.0 .59 10A88 9002-2088 90.0 .60 10A89 9002-2089 91.0 .61 10A90 9002-2090 92.0 .61 10A91 9002-2091 93.0 .62 10A92 9002-2092 94.0 .62 10A93 9002-2093 95.0 .63 10A94 9002-2094 96.0 .64 10A95 9002-2095 97.0 .65 10A96 9002-2096 98.0 .66 10A97 9002-2097 99.0 .66 10A98 9002-2098 100.0 .67 10A99 9002-2099 101.0 .67 10A100 9002-2100 102.0 .67 10A101 9002-2101 103.0 .68 10A102 9002-2102 104.0 .68 10A103 9002-2103 105.0 .70 10A104 9002-2104 106.0 .72 10A105 9002-2105 107.0 .72 10A106 9002-2106 108.0 .73 10A107 9002-2107 109.0 .74 10A108 9002-2108 110.0 .74 10A110 9002-2110 112.0 .76 10A112 9002-2112 114.0 .77 10A113 9002-2113 115.0 .78 10A114 9002-2114 116.0 .79 10A115 9002-2115 117.0 .80 10

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

A116 9002-2116 118.0 .80 10A117 9002-2117 119.0 .81 10A118 9002-2118 120.0 .82 10A120 9002-2120 122.0 .82 10A124 9002-2124 126.0 .86 10A125 9002-2125 127.0 .86 10A127 9002-2127 129.0 .89 10A128 9002-2128 130.0 .88 10A130 9002-2130 132.0 .89 10A132 9002-2132 134.0 .91 10A133 9002-2133 135.0 .93 10A134 9002-2134 136.0 .93 10A136 9002-2136 138.0 .94 10A137 9002-2137 139.0 .94 10A140 9002-2140 142.0 .96 10A144 9002-2144 146.0 1.00 10A148 9002-2148 150.0 1.01 10A152 9002-2152 154.0 1.04 10A156 9002-2156 158.0 1.08 10A157 9002-2157 159.0 1.08 10A158 9002-2158 160.0 1.09 10A162 9002-2162 164.0 1.11 10A167 9002-2167 169.0 1.14 10A173 9002-2173 175.0 1.20 10A180 9002-2180 182.0 1.24 10A187 9002-2187 189.0 1.29 10A197 9002-2197 199.0 1.36 10A200 9002-2200 202.0 1.38 10

Product No. Series 9003B Section

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

B24 9003-2024 27.0 .28 100B25 9003-2025 28.0 .30 100B26 9003-2026 29.0 .31 100B27 9003-2027 30.0 .32 100B28 9003-2028 31.0 .33 10B29 9003-2029 32.0 .34 10B30 9003-2030 33.0 .35 10B31 9003-2031 34.0 .36 10B32 9003-2032 35.0 .37 10B33 9003-2033 36.0 .38 10B34 9003-2034 37.0 .39 10B35 9003-2035 38.0 .40 10B36 9003-2036 39.0 .41 10B37 9003-2037 40.0 .42 10B38 9003-2038 41.0 .44 10B39 9003-2039 42.0 .46 10B40 9003-2040 43.0 .47 10B41 9003-2041 44.0 .48 10B42 9003-2042 45.0 .49 10B43 9003-2043 46.0 .50 10B44 9003-2044 47.0 .51 10B45 9003-2045 48.0 .52 10B46 9003-2046 49.0 .53 10

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

B47 9003-2047 50.0 .56 10B48 9003-2048 51.0 .55 10B49 9003-2049 52.0 .55 10B50 9003-2050 53.0 .56 10B51 9003-2051 54.0 .67 10B52 9003-2052 55.0 .58 10B53 9003-2053 56.0 .60 10B54 9003-2054 57.0 .62 10B55 9003-2055 58.0 .63 10B56 9003-2056 59.0 .65 10B57 9003-2057 60.0 .65 10B58 9003-2058 61.0 .67 10B59 9003-2059 62.0 .68 10B60 9003-2060 63.0 .68 10B61 9003-2061 64.0 .69 10B62 9003-2062 65.0 .70 10B63 9003-2063 66.0 .72 10B64 9003-2064 67.0 .73 10B65 9003-2065 68.0 .74 10B66 9003-2066 69.0 .76 10B67 9003-2067 70.0 .77 10B68 9003-2068 71.0 .78 10B69 9003-2069 72.0 .79 10


Hi-Power® II BeltsProduct No. Series 9002 (continued)A Section (continued)


HEAV

YDU

TYV-

BELT

S

Hi-Power® II Belts Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


HI-POWER® II BELTS

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

B70 9003-2070 73.0 .80 10B71 9003-2071 74.0 .81 10B72 9003-2072 75.0 .82 10B73 9003-2073 76.0 .82 10B74 9003-2074 77.0 .83 10B75 9003-2075 78.0 .85 10B76 9003-2076 79.0 .85 10B77 9003-2077 80.0 .87 10B78 9003-2078 81.0 .89 10B79 9003-2079 82.0 .89 10B80 9003-2080 83.0 .90 10B81 9003-2081 84.0 .91 10B82 9003-2082 85.0 .92 10B83 9003-2083 86.0 .92 10B84 9003-2084 87.0 .93 10B85 9003-2085 88.0 .95 10B86 9003-2086 89.0 .96 10B87 9003-2087 90.0 .97 10B88 9003-2088 91.0 .98 10B89 9003-2089 92.0 .99 10B90 9003-2090 93.0 1.00 10B91 9003-2091 94.0 1.02 10B92 9003-2092 95.0 1.03 10B93 9003-2093 96.0 1.04 10B94 9003-2094 97.0 1.05 10B95 9003-2095 98.0 1.06 10B96 9003-2096 99.0 1.07 10B97 9003-2097 100.0 1.08 10B98 9003-2098 101.0 1.10 10B99 9003-2099 102.0 1.11 10B100 9003-2100 103.0 1.12 10B101 9003-2101 104.0 1.13 10B102 9003-2102 105.0 1.14 10B103 9003-2103 106.0 1.15 10B104 9003-2104 107.0 1.16 10B105 9003-2105 108.0 1.17 10B106 9003-2106 109.0 1.18 10B107 9003-2107 110.0 1.19 10B108 9003-2108 111.0 1.20 10B109 9003-2109 112.0 1.22 10B110 9003-2110 113.0 1.23 10B111 9003-2111 114.0 1.23 10B112 9003-2112 115.0 1.24 10B113 9003-2113 116.0 1.26 10B114 9003-2114 117.0 1.27 10B115 9003-2115 118.0 1.28 10B116 9003-2116 119.0 1.29 10B117 9003-2117 120.0 1.29 10B118 9003-2118 121.0 1.30 10B119 9003-2119 122.0 1.31 10B120 9003-2120 123.0 1.32 10B122 9003-2122 125.0 1.35 10B123 9003-2123 126.0 1.36 10B124 9003-2124 127.0 1.38 10B125 9003-2125 128.0 1.39 10B126 9003-2126 129.0 1.40 10B127 9003-2127 130.0 1.41 10B128 9003-2128 131.0 1.43 10B130 9003-2130 133.0 1.44 10B131 9003-2131 134.0 1.45 10B132 9003-2132 135.0 1.48 10B133 9003-2133 136.0 1.49 10

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

B134 9003-2134 137.0 1.49 10B135 9003-2135 138.0 1.50 10B136 9003-2136 139.0 1.52 10B137 9003-2137 140.0 1.53 10B138 9003-2138 141.0 1.53 10B139 9003-2139 142.0 1.54 10B140 9003-2140 143.0 1.55 10B141 9003-2141 144.0 1.56 10B142 9003-2142 145.0 1.57 10B143 9003-2143 146.0 1.58 10B144 9003-2144 147.0 1.61 10B145 9003-2145 148.0 1.62 10B146 9003-2146 149.0 1.63 10B147 9003-2147 150.0 1.63 10B148 9003-2148 151.0 1.64 10B149 9003-2149 152.0 1.65 10B150 9003-2150 153.0 1.66 10B151 9003-2151 154.0 1.68 10B152 9003-2152 155.0 1.69 10B153 9003-2153 156.0 1.70 10B154 9003-2154 157.0 1.70 10B156 9003-2156 159.0 1.73 10B157 9003-2157 160.0 1.73 10B158 9003-2158 161.0 1.76 10B160 9003-2160 163.0 1.77 10B161 9003-2161 164.0 1.78 10B162 9003-2162 165.0 1.79 10B164 9003-2164 167.0 1.83 10B165 9003-2165 168.0 1.84 10B166 9003-2166 169.0 1.84 10B167 9003-2167 170.0 1.85 10B168 9003-2168 171.0 1.85 10B169 9003-2169 172.0 1.86 10B170 9003-2170 173.0 1.88 10B172 9003-2172 175.0 1.89 10B173 9003-2173 176.0 1.93 10B174 9003-2174 177.0 1.94 10B175 9003-2175 178.0 1.95 10B177 9003-2177 180.0 1.96 10B178 9003-2178 181.0 1.98 10B180 9003-2180 183.0 1.99 10B182 9003-2182 185.0 2.00 10B184 9003-2184 187.0 2.01 10B185 9003-2185 188.0 2.05 10B186 9003-2186 189.0 2.06 10B187 9003-2187 190.0 2.06 10B188 9003-2188 191.0 2.07 10B190 9003-2190 193.0 2.10 10B191 9003-2191 194.0 2.12 10B192 9003-2192 195.0 2.14 10B195 9003-2195 198.0 2.16 10B197 9003-2197 200.0 2.19 10B199 9003-2199 202.0 2.20 10B200 9003-2200 203.0 2.21 5B201 9003-2201 204.0 2.23 5B204 9003-2204 207.0 2.25 5B205 9003-2205 208.0 2.27 5B206 9003-2206 209.0 2.28 5B210 9003-2210 213.0 2.30 5B212 9003-2212 213.0 2.32 5B215 9003-2215 216.0 2.38 5B217 9003-2217 218.0 2.41 5


Hi-Power® II BeltsProduct No. Series 9003 (continued)B Section (continued)


HEAVYDUTY

V-BELTS

Hi-Power® II Belts

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

B218 9003-2218 219.0 2.42 5B220 9003-2220 221.0 2.43 5B221 9003-2221 222.0 2.44 5B223 9003-2223 224.0 2.47 5B225 9003-2225 226.0 2.48 5B228 9003-2228 229.0 2.53 5B230 9003-2230 231.0 2.54 5B234 9003-2234 235.0 2.56 5B235 9003-2235 236.0 2.59 5B236 9003-2236 237.0 2.60 5B237 9003-2237 238.0 2.62 5B240 9003-2240 241.0 2.63 5B248 9003-2248 249.0 2.65 5B253 9003-2253 254.0 2.67 5B255 9003-2255 256.0 2.68 5B265 9003-2265 266.0 2.80 5B270 9003-2270 271.0 2.82 5B276 9003-2276 277.0 2.85 5

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

B279 9003-2279 280.0 2.92 5B280 9003-2280 281.0 2.94 5B285 9003-2285 286.0 3.05 5B290 9003-2290 291.0 3.18 5B292 9003-2292 293.0 3.20 5B293 9003-2293 294.0 3.24 5B300 9003-2300 301.0 3.25 5B310 9003-2310 311.0 3.40 5B315 9003-2315 316.0 3.45 5B330 9003-2330 331.0 3.65 5B340 9003-2340 341.0 3.90 5B345 9003-2345 346.0 3.96 5B355 9003-2355 356.0 4.00 5B360 9003-2360 361.0 4.03 5B394 9003-2394 395.0 4.60 5B433 9003-2433 434.0 5.05 5B472 9003-2472 473.0 5.63 5

Product No. Series 9004C Section

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

C44 9004-2044 48.0 .86 10C45 9004-2045 49.0 .87 10C46 9004-2046 50.0 .90 10C47 9004-2047 51.0 .97 10C48 9004-2048 52.0 .96 10C49 9004-2049 53.0 .98 10C50 9004-2050 54.0 .99 10C51 9004-2051 55.0 1.00 10C52 9004-2052 56.0 1.02 10C53 9004-2053 57.0 1.03 10C54 9004-2054 58.0 1.07 10C55 9004-2055 59.0 1.10 10C56 9004-2056 60.0 1.13 10C57 9004-2057 61.0 1.16 10C58 9004-2058 62.0 1.17 10C59 9004-2059 63.0 1.18 10C60 9004-2060 64.0 1.18 10C61 9004-2061 65.0 1.20 10C62 9004-2062 66.0 1.22 10C63 9004-2063 67.0 1.24 10C64 9004-2064 68.0 1.27 10C65 9004-2065 69.0 1.30 10C66 9004-2066 70.0 1.32 10C67 9004-2067 71.0 1.33 10C68 9004-2068 72.0 1.35 10C69 9004-2069 73.0 1.37 10C70 9004-2070 74.0 1.38 10C71 9004-2071 75.0 1.40 10C72 9004-2072 76.0 1.41 10C73 9004-2073 77.0 1.45 10C74 9004-2074 78.0 1.47 10C75 9004-2075 79.0 1.49 10

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

C76 9004-2076 80.0 1.50 10C77 9004-2077 81.0 1.52 10C78 9004-2078 82.0 1.54 10C79 9004-2079 83.0 1.56 10C80 9004-2080 84.0 1.58 10C81 9004-2081 85.0 1.60 10C82 9004-2082 86.0 1.61 10C83 9004-2083 87.0 1.62 10C84 9004-2084 88.0 1.64 10C85 9004-2085 89.0 1.66 10C86 9004-2086 90.0 1.68 10C87 9004-2087 91.0 1.70 10C88 9004-2088 92.0 1.72 10C89 9004-2089 93.0 1.74 10C90 9004-2090 94.0 1.76 10C91 9004-2091 95.0 1.78 10C92 9004-2092 96.0 1.80 10C93 9004-2093 97.0 1.82 10C94 9004-2094 98.0 1.84 10C95 9004-2095 99.0 1.86 10C96 9004-2096 100.0 1.88 10C97 9004-2097 101.0 1.90 10C98 9004-2098 102.0 1.92 10C99 9004-2099 103.0 1.94 10C100 9004-2100 104.0 1.96 10C101 9004-2101 105.0 1.99 10C102 9004-2102 106.0 2.02 10C103 9004-2103 107.0 2.04 10C104 9004-2104 108.0 2.06 10C105 9004-2105 109.0 2.08 10C106 9004-2106 110.0 2.10 10C107 9004-2107 111.0 2.12 10


Hi-Power® II BeltsProduct No. Series 9003 (continued)B Section (continued)


HEAV

YDU

TYV-

BELT

S



oseSpecialized M


ydraulic Hose

Equipment

Belts


HI-POWER® II BELTS

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

C108 9004-2108 112.0 2.14 10C109 9004-2109 113.0 2.16 10C110 9004-2110 114.0 2.17 10C111 9004-2111 115.0 2.19 10C112 9004-2112 116.0 2.21 10C113 9004-2113 117.0 2.23 10C114 9004-2114 118.0 2.25 10C115 9004-2115 119.0 2.27 10C116 9004-2116 120.0 2.30 10C117 9004-2117 121.0 2.30 10C118 9004-2118 122.0 2.30 10C119 9004-2119 123.0 2.36 10C120 9004-2120 124.0 2.38 10C121 9004-2121 125.0 2.40 10C122 9004-2122 126.0 2.42 10C123 9004-2123 127.0 2.44 10C124 9004-2124 128.0 2.45 10C125 9004-2125 129.0 2.48 10C126 9004-2126 130.0 2.50 10C127 9004-2127 131.0 2.50 10C128 9004-2128 132.0 2.52 10C130 9004-2130 134.0 2.55 10C131 9004-2131 135.0 2.57 10C132 9004-2132 136.0 2.59 10C133 9004-2133 137.0 2.61 10C134 9004-2134 138.0 2.63 10C135 9004-2135 139.0 2.65 10C136 9004-2136 140.0 2.67 10C137 9004-2137 141.0 2.69 10C138 9004-2138 142.0 2.71 10C139 9004-2139 143.0 2.73 10C140 9004-2140 144.0 2.75 10C141 9004-2141 145.0 2.77 10C142 9004-2142 146.0 2.79 10C143 9004-2143 147.0 2.81 10C144 9004-2144 148.0 2.83 10C145 9004-2145 149.0 2.85 10C146 9004-2146 150.0 2.87 10C147 9004-2147 151.0 2.89 10C148 9004-2148 152.0 2.91 10C149 9004-2149 153.0 2.93 10C150 9004-2150 154.0 2.95 10C151 9004-2151 155.0 2.97 10C152 9004-2152 156.7 2.99 10C153 9004-2153 157.0 3.01 10C154 9004-2154 158.0 3.03 10C155 9004-2155 159.0 3.05 10C156 9004-2156 160.0 3.07 10C157 9004-2157 161.0 3.09 10C158 9004-2158 162.0 3.11 10C160 9004-2160 164.0 3.13 10C162 9004-2162 166.0 3.15 10C164 9004-2164 168.0 3.17 10C165 9004-2165 169.0 3.19 10C166 9004-2166 170.0 3.21 10C167 9004-2167 171.0 3.23 10C168 9004-2168 172.0 3.25 10C169 9004-2169 173.0 3.27 10C170 9004-2170 174.0 3.29 10C173 9004-2173 177.0 3.40 10C175 9004-2175 179.0 3.45 5C176 9004-2176 180.0 3.47 5

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

C177 9004-2177 181.0 3.50 5C178 9004-2178 182.0 3.50 5C180 9004-2180 184.0 3.57 5C181 9004-2181 185.0 3.59 5C182 9004-2182 186.0 3.61 5C183 9004-2183 187.0 3.63 5C184 9004-2184 188.0 3.65 5C185 9004-2185 189.0 3.67 5C187 9004-2187 191.0 3.71 5C188 9004-2188 192.0 3.73 5C189 9004-2189 193.0 3.75 5C190 9004-2190 194.0 3.77 5C193 9004-2193 197.0 3.81 5C195 9004-2195 199.0 3.83 5C197 9004-2197 201.0 3.87 5C198 9004-2198 202.0 3.90 5C200 9004-2200 204.0 3.93 5C202 9004-2202 206.0 3.95 5C204 9004-2204 208.0 3.97 5C205 9004-2205 209.0 3.99 5C206 9004-2206 210.0 4.01 5C207 9004-2207 211.0 4.10 5C208 9004-2208 212.0 4.12 5C210 9004-2210 214.0 4.15 5C214 9004-2214 216.0 4.25 5C215 9004-2215 217.0 4.27 5C218 9004-2218 220.0 4.32 5C220 9004-2220 222.0 4.60 5C221 9004-2221 223.0 4.35 5C225 9004-2225 227.0 4.40 5C228 9004-2228 230.0 4.50 5C229 9004-2229 231.0 4.53 5C230 9004-2230 232.0 4.53 5C235 9004-2235 237.0 4.63 5C238 9004-2238 240.0 4.70 5C240 9004-2240 242.0 4.65 5C245 9004-2245 247.0 4.72 5C246 9004-2246 248.0 4.74 5C248 9004-2248 250.0 4.79 5C250 9004-2250 252.0 5.00 5C255 9004-2255 257.0 5.10 5C264 9004-2264 266.0 5.52 5C265 9004-2265 267.0 5.41 5C270 9004-2270 272.0 5.60 5C275 9004-2275 277.0 5.70 5C276 9004-2276 278.0 5.71 5C280 9004-2280 282.0 6.20 5C285 9004-2285 287.0 5.80 5C290 9004-2290 292.0 6.00 5C295 9004-2295 297.0 6.10 5C297 9004-2297 299.0 6.22 5C300 9004-2300 302.0 6.26 5C303 9004-2303 305.0 6.28 5C314 9004-2314 316.0 6.55 4C315 9004-2315 317.0 6.72 5C320 9004-2320 322.0 6.80 4C330 9004-2330 332.0 7.10 4C345 9004-2345 347.0 7.40 4C360 9004-2360 362.0 7.80 4C390 9004-2390 392.0 8.60 3C420 9004-2420 422.0 9.40 1C450 9004-2450 452.0 10.20 1


Hi-Power® II BeltsProduct No. Series 9004 (continued)C Section (continued)


HEAVYDUTY

V-BELTS

Hi-Power® II Belts

Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Product No. Series 9005D Section

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

D90 9005-2090 95.0 4.80 1D98 9005-2098 103.0 5.05 1D104 9005-2104 109.0 5.22 1D105 9005-2105 110.0 5.29 1D107 9005-2107 112.0 5.34 1D108 9005-2108 113.0 5.41 1D110 9005-2110 115.0 5.49 1D112 9005-2112 117.0 5.62 1D120 9005-2120 125.0 5.86 1D124 9005-2124 129.0 6.00 1D128 9005-2128 133.0 6.14 1D132 9005-2132 137.0 6.29 1D135 9005-2135 140.0 6.36 1D136 9005-2136 141.0 6.43 1D140 9005-2140 145.0 6.47 1D144 9005-2144 149.0 6.50 1D148 9005-2148 153.0 6.75 1D152 9005-2152 157.0 7.02 1D154 9005-2154 159.0 7.11 1D158 9005-2158 163.0 7.13 1D160 9005-2160 165.0 7.15 1D162 9005-2162 167.0 7.18 1D164 9005-2164 169.0 7.21 1D165 9005-2165 170.0 7.25 1D166 9005-2166 171.0 7.30 1D167 9005-2167 172.0 7.36 1D170 9005-2170 175.0 7.42 1D171 9005-2171 176.0 7.46 1D173 9005-2173 178.0 7.50 1D180 9005-2180 185.0 7.90 1

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

D195 9005-2195 200.0 8.90 1D205 9005-2205 210.0 9.37 1D210 9005-2210 215.0 9.50 1D220 9005-2220 223.0 10.15 1D225 9005-2225 228.0 10.30 1D230 9005-2230 233.0 10.50 1D240 9005-2240 243.0 10.92 1D248 9005-2248 251.0 11.00 1D255 9005-2255 258.0 11.45 1D260 9005-2260 263.0 11.70 1D270 9005-2270 273.0 12.25 1D280 9005-2280 283.0 12.48 1D285 9005-2285 288.0 12.65 1D300 9005-2300 303.0 13.30 1D315 9005-2315 318.0 14.00 1D330 9005-2330 333.0 14.40 1D335 9005-2335 338.0 14.86 1D345 9005-2345 348.0 15.23 1D354 9005-2354 357.0 15.60 1D360 9005-2360 363.0 15.90 1D390 9005-2390 393.0 16.96 1D394 9005-2394 397.0 17.14 1D420 9005-2420 423.0 18.11 1D441 9005-2441 444.0 18.92 1D450 9005-2450 453.0 19.30 1D480 9005-2480 483.0 20.55 1D540 9005-2540 543.0 23.05 1D600 9005-2600 603.0 25.87 1D660 9005-2660 663.0 28.10 1

Product No. Series 9006E Section

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

E144 9006-2144 149.0 9.50 1E158 9006-2158 165.0 10.48 1E180 9006-2180 187.0 11.66 1E195 9006-2195 202.0 12.55 1E210 9006-2210 217.0 13.35 1E240 9006-2240 244.0 15.05 1E250 9006-2250 254.0 15.84 1E270 9006-2270 274.0 16.80 1E300 9006-2300 304.0 18.50 1E310 9006-2310 314.0 19.00 1

SizeProduct

No.

BeltO.C.(In.)

Wt.Ea.

(Lbs.)

QtyPerCtn

E330 9006-2330 334.0 19.75 1E360 9006-2360 364.0 21.30 1E390 9006-2390 394.0 23.15 1E420 9006-2420 424.0 24.75 1E441 9006-2441 445.0 25.79 1E460 9006-2460 464.0 26.82 1E480 9006-2480 484.0 28.30 1E540 9006-2540 544.0 32.02 1E600 9006-2600 604.0 35.28 1E660 9006-2660 664.0 38.14 1


Hi-Power® II Belts


HEAV

YDU

TYV-

BELT

S



oseSpecialized M


ydraulic Hose

Equipment

Belts


HI-POWER® II BELTS

The PowerBand® construction allows multiple belts to function asa single unit, with even load distribution and each strand fittingsecurely in the sheave groove.

Markets/ApplicationsRecommended for drives where single belts vibrate, turn over orjump off the drive.

Features/Advantages■Concave sidewalls provide proper cord support and full contact

with the sheave-groove for equal loading and uniform wear.■Flex-Bonded Cords are strongly bonded to the body of the belt

resulting in equal load distribution and the absorption of bendingstress without cord deterioration.

■Meets RMA oil and heat resistant standards.■Meets RMA static conductivity requirements.■The Tie Band assures high lateral rigidity, guiding the belt in a

straight line and preventing it from coming off the drive.

Size Range/Availability■Large Inventory of standard lengths and widths are readily available. See sizing table for details.■Belt Slitters located onsite at several Gates Service Centers can cut down an existing belt in inventory to the

strand width needed.■Made-To-Order Belt Lengths are available in any size from: A (38 to 212 inch), B (35 to 663 inch),

C (56 to 662 inch) and D (126 to 665 inch). Check with Customer Service for minimum order quantity andmanufacturing lead time.

Recommended SheavesMulti-Duty® Sheaves (B, C, D)

NotesBelt part number is constructed by placing the (#) number of strands required followed by a slash (/) in front of the belt size.For Example, 5/B66 represents a B66 with 5 joined strands.

Belt product number is 8 or 9 digits constructed of product series prefix, number of strands, and belt length.For example, 90925066 represents an "A" section PowerBand (9092) with 5 strands (5) that is 66.0 inches (066) long.

Most "A" Section sheaves are a combination "A-B" groove."A" Section PowerBand® Belts are not recommended for usein sheaves with "A-B" combination grooves. "A" SectionPowerBand® belts may be Made-To-Order and requireminimum order quantities. Check with Customer Service foravailability.

Product No. Series 9092A Section

Size(# = strands)

BeltO.C.(In.)

Wt. PerStrand(Lbs.)



2Strand

3Strand

4Strand

5Strand

6Strand

7Strand

8Strand

9Strand

10Strand

11Strand

12Strand

9092- 9092- 9092- 9092- 9092- 9092- 9092- 9092- 9092- 9092- 9092- 9092-15 #/A42 44.0 .36 2042 3042 4042 5042 6042 7042 8042 9042 10042 11042 12042 ##04215 #/A43 45.0 .37 2043 3043 4043 5043 6043 7043 8043 9043 10043 11043 12043 ##04315 #/A44 46.0 .38 2044 3044 4044 5044 6044 7044 8044 9044 10044 11044 12044 ##04415 #/A46 48.0 .40 2046 3046 4046 5046 6046 7046 8046 9046 10046 11046 12046 ##04615 #/A47 49.0 .40 2047 3047 4047 5047 6047 7047 8047 9047 10047 11047 12047 ##04715 #/A48 50.0 .40 2048 3048 4048 5048 6048 7048 8048 9048 10048 11048 12048 ##04815 #/A49 51.0 .42 2049 3049 4049 5049 6049 7049 8049 9049 10049 11049 12049 ##04915 #/A51 53.0 .44 2051 3051 4051 5051 6051 7051 8051 9051 10051 11051 12051 ##05115 #/A53 55.0 .46 2053 3053 4053 5053 6053 7053 8053 9053 10053 11053 12053 ##05315 #/A54 56.0 .46 2054 3054 4054 5054 6054 7054 8054 9054 10054 11054 12054 ##05415 #/A55 57.0 .47 2055 3055 4055 5055 6055 7055 8055 9055 10055 11055 12055 ##05515 #/A56 58.0 .48 2056 3056 4056 5056 6056 7056 8056 9056 10056 11056 12056 ##05615 #/A57 59.0 .50 2057 3057 4057 5057 6057 7057 8057 9057 10057 11057 12057 ##05715 #/A58 60.0 .50 2058 3058 4058 5058 6058 7058 8058 9058 10058 11058 12058 ##05815 #/A60 62.0 .52 2060 3060 4060 5060 6060 7060 8060 9060 10060 11060 12060 ##060

#/A62 64.0 .54 2062 3062 4062 5062 6062 7062 8062 9062 10062 11062 12062 ##062


Hi-Power® II PowerBand® V-Belts

15 Not included in V-80 matching program.


HEAVYDUTY

V-BELTS


Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Size(# = strands)

BeltO.C.(In.)

Wt. PerStrand(Lbs.)



2Strand

3Strand

4Strand

5Strand

6Strand

7Strand

8Strand

9Strand

10Strand

11Strand

12Strand

9092- 9092- 9092- 9092- 9092- 9092- 9092- 9092- 9092- 9092- 9092- 9092-

#/A64 66.0 .56 2064 3064 4064 5064 6064 7064 8064 9064 10064 11064 12064 ##064#/A65 67.0 .56 2065 3065 4065 5065 6065 7065 8065 9065 10065 11065 12065 ##065#/A66 68.0 .57 2066 3066 4066 5066 6066 7066 8066 9066 10066 11066 12066 ##066#/A68 70.0 .58 2068 3068 4068 5068 6068 7068 8068 9068 10068 11068 12068 ##068#/A70 72.0 .61 2070 3070 4070 5070 6070 7070 8070 9070 10070 11070 12070 ##070#/A71 73.0 .61 2071 3071 4071 5071 6071 7071 8071 9071 10071 11071 12071 ##071#/A74 76.0 .64 2074 3074 4074 5074 6074 7074 8074 9074 10074 11074 12074 ##074#/A75 77.0 .66 2075 3075 4075 5075 6075 7075 8075 9075 10075 11075 12075 ##075#/A77 79.0 .66 2077 3077 4077 5077 6077 7077 8077 9077 10077 11077 12077 ##077#/A78 80.0 .67 2078 3078 4078 5078 6078 7078 8078 9078 10078 11078 12078 ##078#/A80 82.0 .70 2080 3080 4080 5080 6080 7080 8080 9080 10080 11080 12080 ##080#/A81 83.0 .70 2081 3081 4081 5081 6081 7081 8081 9081 10081 11081 12081 ##081#/A83 85.0 .71 2083 3083 4083 5083 6083 7083 8083 9083 10083 11083 12083 ##083#/A85 87.0 .74 2085 3085 4085 5085 6085 7085 8085 9085 10085 11085 12085 ##085#/A90 92.0 .77 2090 3090 4090 5090 6090 7090 8090 9090 10090 11090 12090 ##090#/A92 94.0 .80 2092 3092 4092 5092 6092 7092 8092 9092 10092 11092 12092 ##092#/A96 98.0 .84 2096 3096 4096 5096 6096 7096 8096 9096 10096 11096 12096 ##096#/A100 102.0 .86 2100 3100 4100 5100 6100 7100 8100 9100 10100 11100 12100 ##100#/A105 107.0 .90 2105 3105 4105 5105 6105 7105 8105 9105 10105 11105 12105 ##105#/A110 112.0 .96 2110 3110 4110 5110 6110 7110 8110 9110 10110 11110 12110 ##110#/A112 114.0 .96 2112 3112 4112 5112 6112 7112 8112 9112 10112 11112 12112 ##112#/A120 122.0 1.04 2120 3120 4120 5120 6120 7120 8120 9120 10120 11120 12120 ##120#/A128 130.0 1.10 2128 3128 4128 5128 6128 7128 8128 9128 10128 11128 12128 ##128#/A136 138.0 1.17 2136 3136 4136 5136 6136 7136 8136 9136 10136 11136 12136 ##136#/A144 146.0 1.24 2144 3144 4144 5144 6144 7144 8144 9144 10144 11144 12144 ##144#/A158 160.0 1.36 2158 3158 4158 5158 6158 7158 8158 9158 10158 11158 12158 ##158#/A173 175.0 1.50 2173 3173 4173 5173 6173 7173 8173 9173 10173 11173 12173 ##173#/A180 182.0 1.56 2180 3180 4180 5180 6180 7180 8180 9180 10180 11180 12180 ##180

Product No. Series 9093B Section

Size(# = strands)

BeltO.C.(In.)

Wt. PerStrand(Lbs.)



2Strand

3Strand

4Strand

5Strand

6Strand

7Strand

8Strand

9Strand

10Strand

11Strand

12Strand

9093- 9093- 9093- 9093- 9093- 9093- 9093- 9093- 9093- 9093- 9093- 9093-15 #/B35 38.0 .52 2035 3035 4035 5035 6035 7035 8035 9035 10035 11035 12035 ##03515 #/B38 41.0 .56 2038 3038 4038 5038 6038 7038 8038 9038 10038 11038 12038 ##03815 #/B40 43.0 .57 2040 3040 4040 5040 6040 7040 8040 9040 10040 11040 12040 ##04015 #/B41 44.0 .58 2041 3041 4041 5041 6041 7041 8041 9041 10041 11041 12041 ##04115 #/B42 45.0 .62 2042 3042 4042 5042 6042 7042 8042 9042 10042 11042 12042 ##04215 #/B43 46.0 .64 2043 3043 4043 5043 6043 7043 8043 9043 10043 11043 12043 ##04315 #/B44 47.0 .66 2044 3044 4044 5044 6044 7044 8044 9044 10044 11044 12044 ##04415 #/B46 49.0 .68 2046 3046 4046 5046 6046 7046 8046 9046 10046 11046 12046 ##04615 #/B47 50.0 .70 2047 3047 4047 5047 6047 7047 8047 9047 10047 11047 12047 ##04715 #/B48 51.0 .71 2048 3048 4048 5048 6048 7048 8048 9048 10048 11048 12048 ##04815 #/B50 53.0 .74 2050 3050 4050 5050 6050 7050 8050 9050 10050 11050 12050 ##05015 #/B51 54.0 .76 2051 3051 4051 5051 6051 7051 8051 9051 10051 11051 12051 ##05115 #/B52 55.0 .77 2052 3052 4052 5052 6052 7052 8052 9052 10052 11052 12052 ##05215 #/B53 56.0 .78 2053 3053 4053 5053 6053 7053 8053 9053 10053 11053 12053 ##05315 #/B54 57.0 .80 2054 3054 4054 5054 6054 7054 8054 9054 10054 11054 12054 ##05415 #/B55 58.0 .81 2055 3055 4055 5055 6055 7055 8055 9055 10055 11055 12055 ##05515 #/B56 59.0 .84 2056 3056 4056 5056 6056 7056 8056 9056 10056 11056 12056 ##05615 #/B57 60.0 .84 2057 3057 4057 5057 6057 7057 8057 9057 10057 11057 12057 ##05715 #/B58 61.0 .86 2058 3058 4058 5058 6058 7058 8058 9058 10058 11058 12058 ##05815 #/B59 62.0 .87 2059 3059 4059 5059 6059 7059 8059 9059 10059 11059 12059 ##05915 #/B60 63.0 .90 2060 3060 4060 5060 6060 7060 8060 9060 10060 11060 12060 ##06015 #/B61 64.0 .90 2061 3061 4061 5061 6061 7061 8061 9061 10061 11061 12061 ##061

#/B62 65.0 .92 2062 3062 4062 5062 6062 7062 8062 9062 10062 11062 12062 ##062#/B63 66.0 .94 2063 3063 4063 5063 6063 7063 8063 9063 10063 11063 12063 ##063#/B64 67.0 .96 2064 3064 4064 5064 6064 7064 8064 9064 10064 11064 12064 ##064#/B65 68.0 .96 2065 3065 4065 5065 6065 7065 8065 9065 10065 11065 12065 ##065#/B66 69.0 .98 2066 3066 4066 5066 6066 7066 8066 9066 10066 11066 12066 ##066#/B67 70.0 1.00 2067 3067 4067 5067 6067 7067 8067 9067 10067 11067 12067 ##067#/B68 71.0 1.00 2068 3068 4068 5068 6068 7068 8068 9068 10068 11068 12068 ##068#/B70 73.0 1.04 2070 3070 4070 5070 6070 7070 8070 9070 10070 11070 12070 ##070


Hi-Power® II PowerBand® V-BeltsProduct No. Series 9092 (continued)A Section (continued)



HEAV

YDU

TYV-

BELT

S

Hi-Power® II PowerBand® V-Belts Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


HI-POWER® II BELTS

Size(# = strands)

BeltO.C.(In.)

Wt. PerStrand(Lbs.)



2Strand

3Strand

4Strand

5Strand

6Strand

7Strand

8Strand

9Strand

10Strand

11Strand

12Strand

9093- 9093- 9093- 9093- 9093- 9093- 9093- 9093- 9093- 9093- 9093- 9093-

#/B71 74.0 1.06 2071 3071 4071 5071 6071 7071 8071 9071 10071 11071 12071 ##071#/B72 75.0 1.06 2072 3072 4072 5072 6072 7072 8072 9072 10072 11072 12072 ##072#/B73 76.0 1.08 2073 3073 4073 5073 6073 7073 8073 9073 10073 11073 12073 ##073#/B74 77.0 1.10 2074 3074 4074 5074 6074 7074 8074 9074 10074 11074 12074 ##074#/B75 78.0 1.11 2075 3075 4075 5075 6075 7075 8075 9075 10075 11075 12075 ##075#/B77 80.0 1.14 2077 3077 4077 5077 6077 7077 8077 9077 10077 11077 12077 ##077#/B78 81.0 1.16 2078 3078 4078 5078 6078 7078 8078 9078 10078 11078 12078 ##078#/B79 82.0 1.17 2079 3079 4079 5079 6079 7079 8079 9079 10079 11079 12079 ##079#/B80 83.0 1.18 2080 3080 4080 5080 6080 7080 8080 9080 10080 11080 12080 ##080#/B81 84.0 1.20 2081 3081 4081 5081 6081 7081 8081 9081 10081 11081 12081 ##081#/B82 85.0 1.21 2082 3082 4082 5082 6082 7082 8082 9082 10082 11082 12082 ##082#/B83 86.0 1.24 2083 3083 4083 5083 6083 7083 8083 9083 10083 11083 12083 ##083#/B84 87.0 1.25 2084 3084 4084 5084 6084 7084 8084 9084 10084 11084 12084 ##084#/B85 88.0 1.26 2085 3085 4085 5085 6085 7085 8085 9085 10085 11085 12085 ##085#/B86 89.0 1.28 2086 3086 4086 5086 6086 7086 8086 9086 10086 11086 12086 ##086#/B87 90.0 1.30 2087 3087 4087 5087 6087 7087 8087 9087 10087 11087 12087 ##087#/B88 91.0 1.30 2088 3088 4088 5088 6088 7088 8088 9088 10088 11088 12088 ##088#/B90 93.0 1.34 2090 3090 4090 5090 6090 7090 8090 9090 10090 11090 12090 ##090#/B92 95.0 1.36 2092 3092 4092 5092 6092 7092 8092 9092 10092 11092 12092 ##092#/B93 96.0 1.37 2093 3093 4093 5093 6093 7093 8093 9093 10093 11093 12093 ##093#/B95 98.0 1.41 2095 3095 4095 5095 6095 7095 8095 9095 10095 11095 12095 ##095#/B96 99.0 1.42 2096 3096 4096 5096 6096 7096 8096 9096 10096 11096 12096 ##096#/B97 100.0 1.44 2097 3097 4097 5097 6097 7097 8097 9097 10097 11097 12097 ##097#/B99 102.0 1.47 2099 3099 4099 5099 6099 7099 8099 9099 10099 11099 12099 ##099#/B100 103.0 1.48 2100 3100 4100 5100 6100 7100 8100 9100 10100 11100 12100 ##100#/B103 106.0 1.52 2103 3103 4103 5103 6103 7103 8103 9103 10103 11103 12103 ##103#/B104 107.0 1.59 2104 3104 4104 5104 6104 7104 8104 9104 10104 11104 12104 ##104#/B105 108.0 1.66 2105 3105 4105 5105 6105 7105 8105 9105 10105 11105 12105 ##105#/B108 111.0 1.60 2108 3108 4108 5108 6108 7108 8108 9108 10108 11108 12108 ##108#/B109 112.0 1.62 2109 3109 4109 5109 6109 7109 8109 9109 10109 11109 12109 ##109#/B110 113.0 1.63 2110 3110 4110 5110 6110 7110 8110 9110 10110 11110 12110 ##110#/B112 115.0 1.66 2112 3112 4112 5112 6112 7112 8112 9112 10112 11112 12112 ##112#/B113 116.0 1.72 2113 3113 4113 5113 6113 7113 8113 9113 10113 11113 12113 ##113#/B114 117.0 1.70 2114 3114 4114 5114 6114 7114 8114 9114 10114 11114 12114 ##114#/B115 118.0 1.71 2115 3115 4115 5115 6115 7115 8115 9115 10115 11115 12115 ##115#/B116 119.0 1.72 2116 3116 4116 5116 6116 7116 8116 9116 10116 11116 12116 ##116#/B118 121.0 1.75 2118 3118 4118 5118 6118 7118 8118 9118 10118 11118 12118 ##118#/B120 123.0 1.78 2120 3120 4120 5120 6120 7120 8120 9120 10120 11120 12120 ##120#/B124 127.0 1.84 2124 3124 4124 5124 6124 7124 8124 9124 10124 11124 12124 ##124#/B128 131.0 1.90 2128 3128 4128 5128 6128 7128 8128 9128 10128 11128 12128 ##128#/B130 133.0 1.93 2130 3130 4130 5130 6130 7130 8130 9130 10130 11130 12130 ##130#/B133 136.0 1.97 2133 3133 4133 5133 6133 7133 8133 9133 10133 11133 12133 ##133#/B136 139.0 2.00 2136 3136 4136 5136 6136 7136 8136 9136 10136 11136 12136 ##136#/B138 141.0 2.04 2138 3138 4138 5138 6138 7138 8138 9138 10138 11138 12138 ##138#/B139 142.0 2.05 2139 3139 4139 5139 6139 7139 8139 9139 10139 11139 12139 ##139#/B141 144.0 2.09 2141 3141 4141 5141 6141 7141 8141 9141 10141 11141 12141 ##141#/B144 147.0 2.14 2144 3144 4144 5144 6144 7144 8144 9144 10144 11144 12144 ##144#/B148 151.0 2.20 2148 3148 4148 5148 6148 7148 8148 9148 10148 11148 12148 ##148#/B150 153.0 2.22 2150 3150 4150 5150 6150 7150 8150 9150 10150 11150 12150 ##150#/B154 157.0 2.28 2154 3154 4154 5154 6154 7154 8154 9154 10154 11154 12154 ##154#/B158 161.0 2.34 2158 3158 4158 5158 6158 7158 8158 9158 10158 11158 12158 ##158#/B160 163.0 2.37 2160 3160 4160 5160 6160 7160 8160 9160 10160 11160 12160 ##160#/B162 165.0 2.40 2162 3162 4162 5162 6162 7162 8162 9162 10162 11162 12162 ##162#/B168 171.0 2.49 2168 3168 4168 5168 6168 7168 8168 9168 10168 11168 12168 ##168#/B173 176.0 2.56 2173 3173 4173 5173 6173 7173 8173 9173 10173 11173 12173 ##173#/B180 183.0 2.66 2180 3180 4180 5180 6180 7180 8180 9180 10180 11180 12180 ##180#/B185 188.0 2.74 2185 3185 4185 5185 6185 7185 8185 9185 10185 11185 12185 ##185#/B190 193.0 2.82 2190 3190 4190 5190 6190 7190 8190 9190 10190 11190 12190 ##190#/B195 198.0 2.90 2195 3195 4195 5195 6195 7195 8195 9195 10195 11195 12195 ##195#/B210 213.0 3.11 2210 3210 4210 5210 6210 7210 8210 9210 10210 11210 12210 ##210#/B218 219.9 3.23 2218 3218 4218 5218 6218 7218 8218 9218 10218 11218 12218 ##218#/B225 226.0 3.34 2225 3225 4225 5225 6225 7225 8225 9225 10225 11225 12225 ##225#/B240 241.0 3.55 2240 3240 4240 5240 6240 7240 8240 9240 10240 11240 12240 ##240#/B255 256.0 3.77 2255 3255 4255 5255 6255 7255 8255 9255 10255 11255 12255 ##255#/B270 271.0 4.00 2270 3270 4270 5270 6270 7270 8270 9270 10270 11270 12270 ##270#/B300 301.0 4.44 2300 3300 4300 5300 6300 7300 8300 9300 10300 11300 12300 ##300#/B315 316.0 4.66 2315 3315 4315 5315 6315 7315 8315 9315 10315 11315 12315 ##315


Hi-Power® II PowerBand® V-BeltsProduct No. Series 9093 (continued)B Section (continued)


HEAVYDUTY

V-BELTS


Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts


Product No. Series 9094C Section

Size(# = strands)

BeltO.C.(In.)

Wt. PerStrand(Lbs.)


2Strand

3Strand

4Strand

5Strand

6Strand

7Strand

8Strand

9Strand

10Strand

11Strand

12Strand

9094- 9094- 9094- 9094- 9094- 9094- 9094- 9094- 9094- 9094- 9094-15 #/C60 64.0 1.56 2060 3060 4060 5060 6060 7060 8060 9060 10060 11060 12060

#/C68 72.0 1.77 2068 3068 4068 5068 6068 7068 8068 9068 10068 11068 12068#/C72 76.0 1.88 2072 3072 4072 5072 6072 7072 8072 9072 10072 11072 12072#/C75 79.0 1.96 2075 3075 4075 5075 6075 7075 8075 9075 10075 11075 12075#/C78 82.0 2.04 2078 3078 4078 5078 6078 7078 8078 9078 10078 11078 12078#/C80 84.0 2.09 2080 3080 4080 5080 6080 7080 8080 9080 10080 11080 12080#/C81 85.0 2.11 2081 3081 4081 5081 6081 7081 8081 9081 10081 11081 12081#/C85 89.0 2.21 2085 3085 4085 5085 6085 7085 8085 9085 10085 11085 12085#/C87 91.0 2.26 2087 3087 4087 5087 6087 7087 8087 9087 10087 11087 12087#/C90 94.0 2.34 2090 3090 4090 5090 6090 7090 8090 9090 10090 11090 12090#/C96 100.0 2.50 2096 3096 4096 5096 6096 7096 8096 9096 10096 11096 12096#/C99 103.0 2.57 2099 3099 4099 5099 6099 7099 8099 9099 10099 11099 12099#/C100 104.0 2.60 2100 3100 4100 5100 6100 7100 8100 9100 10100 11100 12100#/C105 109.0 2.74 2105 3105 4105 5105 6105 7105 8105 9105 10105 11105 12105#/C108 112.0 2.81 2108 3108 4108 5108 6108 7108 8108 9108 10108 11108 12108#/C109 113.0 2.84 2109 3109 4109 5109 6109 7109 8109 9109 10109 11109 12109#/C112 116.0 2.91 2112 3112 4112 5112 6112 7112 8112 9112 10112 11112 12112#/C120 124.0 3.12 2120 3120 4120 5120 6120 7120 8120 9120 10120 11120 12120#/C124 128.0 3.22 2124 3124 4124 5124 6124 7124 8124 9124 10124 11124 12124#/C126 130.0 3.28 2126 3126 4126 5126 6126 7126 8126 9126 10126 11126 12126#/C128 132.0 3.34 2128 3128 4128 5128 6128 7128 8128 9128 10128 11128 12128#/C136 140.0 3.54 2136 3136 4136 5136 6136 7136 8136 9136 10136 11136 12136#/C144 148.0 3.74 2144 3144 4144 5144 6144 7144 8144 9144 10144 11144 12144#/C146 150.0 3.79 2146 3146 4146 5146 6146 7146 8146 9146 10146 11146 12146#/C151 154.9 3.92 2151 3151 4151 5151 6151 7151 8151 9151 10151 11151 12151#/C158 162.0 4.11 2158 3158 4158 5158 6158 7158 8158 9158 10158 11158 12158#/C162 166.0 4.21 2162 3162 4162 5162 6162 7162 8162 9162 10162 11162 12162#/C173 177.0 4.50 2173 3173 4173 5173 6173 7173 8173 9173 10173 11173 12173#/C180 184.0 4.68 2180 3180 4180 5180 6180 7180 8180 9180 10180 11180 12180#/C185 189.0 4.88 2185 3185 4185 5185 6185 7185 8185 9185 10185 11185 12185#/C190 194.0 4.88 2190 3190 4190 5190 6190 7190 8190 9190 10190 11190 12190#/C195 199.0 5.07 2195 3195 4195 5195 6195 7195 8195 9195 10195 11195 12195#/C204 208.0 5.30 2204 3204 4204 5204 6204 7204 8204 9204 10204 11204 12204#/C210 214.0 5.46 2210 3210 4210 5210 6210 7210 8210 9210 10210 11210 12210#/C225 227.0 5.86 2225 3225 4225 5225 6225 7225 8225 9225 10225 11225 12225#/C240 242.0 6.24 2240 3240 4240 5240 6240 7240 8240 9240 10240 11240 12240#/C255 257.0 6.64 2255 3255 4255 5255 6255 7255 8255 9255 10255 11255 12255#/C270 272.0 7.02 2270 3270 4270 5270 6270 7270 8270 9270 10270 11270 12270#/C285 287.0 7.41 2285 3285 4285 5285 6285 7285 8285 9285 10285 11285 12285#/C300 302.0 7.80 2300 3300 4300 5300 6300 7300 8300 9300 10300 11300 12300#/C315 317.0 8.20 2315 3315 4315 5315 6315 7315 8315 9315 10315 11315 12315#/C330 332.0 8.58 2330 3330 4330 5330 6330 7330 8330 9330 10330 11330 12330#/C345 347.0 8.97 2345 3345 4345 5345 6345 7345 8345 9345 10345 11345 12345#/C360 362.0 9.36 2360 3360 4360 5360 6360 7360 8360 9360 10360 11360 12360#/C390 392.0 10.14 2390 3390 4390 5390 6390 7390 8390 9390 10390 11390 12390#/C420 422.0 10.92 2420 3420 4420 5420 6420 7420 8420 9420 10420 11420 12420

Product No. Series 9095D Section

Size(# = strands)

BeltO.C.(In.)

Wt. PerStrand(Lbs.)


2Strand

3Strand

4Strand

5Strand

6Strand

7Strand

8Strand

9095- 9095- 9095- 9095- 9095- 9095- 9095-

#/D144 149.0 6.75 2144 3144 4144 5144 6144 7144#/D158 163.0 7.40 2158 3158 4158 5158 6158 7158#/D173 178.0 8.10 2173 3173 4173 5173 6173 7173#/D180 185.0 8.44 2180 3180 4180 5180 6180 7180





HEAV

YDU

TYV-

BELT

S

Hi-Power® II PowerBand® V-Belts Product Information


oseSpecialized M


ydraulic Hose

Equipment

Belts


HI-POWER® II BELTS

Size(# = strands)

BeltO.C.(In.)

Wt. PerStrand(Lbs.)


2Strand

3Strand

4Strand

5Strand

6Strand

7Strand

8Strand

9095- 9095- 9095- 9095- 9095- 9095- 9095-

#/D195 200.0 9.09 2195 3195 4195 5195 6195 7195#/D210 215.0 9.84 2210 3210 4210 5210 6210 7210 8210#/D225 228.0 10.56 2225 3225 4225 5225 6225 7225 8225#/D240 243.0 11.26 2240 3240 4240 5240 6240 7240 8240#/D255 258.0 11.96 2255 3255 4255 5255 6255 7255 8255#/D270 273.0 12.66 2270 3270 4270 5270 6270 7270 8270#/D285 288.0 13.37 2285 3285 4285 5285 6285 7285 8285#/D300 303.0 14.07 2300 3300 4300 5300 6300 7300 8300#/D315 318.0 14.77 2315 3315 4315 5315 6315 7315 8315#/D330 333.0 15.48 2330 3330 4330 5330 6330 7330 8330#/D345 348.0 16.18 2345 3345 4345 5345 6345 7345 8345#/D360 363.0 16.88 2360 3360 4360 5360 6360 7360 8360#/D390 393.0 18.29 2390 3390 4390 5390 6390 7390 8390#/D420 423.0 19.70 2420 3420 4420 5420 6420 7420 8420#/D450 453.0 21.10 2450 3450 4450 5450 6450 7450 8450#/D480 483.0 22.50 2480 3480 4480 5480 6480 7480 8480#/D540 543.0 25.33 2540 3540 4540 5540 6540 7540 8540#/D600 603.0 28.14 2600 3600 4600 5600 6600 7600 8600

4 #/D660 663.0 31.13 2660 3660 4660 5660 6660 7660 8660


Hi-Power® II PowerBand® V-BeltsProduct No. Series 9095 (continued)D Section (continued)

4 Minimum production quantity may apply. Contact Customer Service for availability.


HEAVYDUTY

V-BELTS


Prod

uct I

nfor

mat

ion

Spec

ializ

ed M

inin

g H

ose

Spec

ializ

ed M

inin

g Co

uplin

gs, A

dapt

ers

and

Acce

ssor

ies

Stan

dard

Hyd

raul

ic H

ose

Equi

pmen

tBe

lts

MINING PRODUCTS

Documents

Transcript of MINING PRODUCTS