Mechanical Engineering

Engineering ­ Mechanical Engineering | Fibers and Polymers

Home  >  Engineering  >  Mechanical Engineering

SUBDISCIPLINES JOURNALS BOOKS SERIES TEXTBOOKS REFERENCE WORKS

Editor­in­Chief: Won Ho Jo

ISSN: 1229­9197 (print version)ISSN: 1875­0052 (electronic version)

Journal no. 12221

ABOUT THIS JOURNAL EDITORIAL BOARD SOCIETY

Fibers and Polymers

RECOMMEND TO LIBRARIAN

Fibers and Polymers, the journal of the Korean Fiber Society, provides you with state­of­the­artresearch in fiber and polymer science and technology related to developments in the textileindustry. Bridging the gap between fiber science and polymer science, the journal's topics include fiberstructure and property, dyeing and finishing, textile processing, and apparel science.

 

Ranks 9 out of 19 in the ISI category Materials Science, Textiles with an Impact Factor of 0.531.

 Aims:The international bimonthly journal Fibers and Polymers publishes original research results inthe fields of fiber and polymer science & engineering. Founded in the beginning of a newmillennium, Fibers and Polymers starts with international readership and authorship, combining

into one journal such closely related themes as fiber and polymer technologies. Fibers and Polymers is unique because it covers interdisciplinary areas related to fibers,polymers, textiles, apparels, colorants, fiber composites, and polymer processing.

 Scope:

Chemistry of Fiber Materials, Polymer Reactions and Synthesis

Physical Properties of Fibers, Polymer Blends and Composites

Fiber Spinning and Textile Processing, Polymer Physics, Morphology

Colorants and Dyeing, Polymer Analysis and Characterization

Chemical Aftertreatment of Textiles, Polymer Processing and Rheology

Textile and Apparel Science, Functional Polymers

 

Related subjects » Polymer Science

IMPACT FACTOR: 0.881 (2014) *

Journal Citation Reports®, Thomson Reuters

ABSTRACTED/INDEXED IN

Science Citation Index Expanded (SciSearch), Journal Citation Reports/Science Edition,SCOPUS, INSPEC, Chemical Abstracts Service (CAS), Google Scholar, CSA, AcademicOneFile, EI­Compendex, Expanded Academic, OCLC, Polymer Library, SCImago, Summon byProQuest

COPUBLISHER/ DISTRIBUTION RIGHTS

Co­publication with The Korean Fiber Society.

Springer has the exclusive distribution rights for print version outside Korea, for electronicversion worldwide

READ THIS JOURNAL ON SPRINGERLINK

Online First Articles

All volumes & issues

Home

Journal Rankings

Journal Search

Country Rankings

Country Search

Compare

Map Generator

Help

About Us

Display journal title

J o u r n a l S e a r c h

in Journal Title Search

Exact phrase

F i b e r s a n d P o l y m e r s

Country: South Korea

Subject Area: Chemical Engineering | Chemistry | Materials Science

Subject Category:

CategoryQuartile (Q1 means highest values and Q4 lowest values)

1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014

Chemical Engineering(miscellaneous)

Chemistry(miscellaneous)

Polymers and Plastics

Publisher: KOREAN FIBER SOCIETY. Publication type: Journals. ISSN: 12299197

Coverage: 2000‐2014

H Index: 27

Scope:

Fibers and Polymers, the journal of the Korean Fiber Society, provides you with state‐of‐the‐art research in fiber and polymerscience [...]Show full scope

Search query

Tweet Share

2014 (2015) 0.881

2013 1.113

2012 0.912

2011 0.836

2010 0.832

2009 0.531

2008 0.577

0Like

ISSN: 1229­9197

Publisher: ­

Country: South Korea

Correspondence Address: Korean Fiber Soc, Korea Science Technology Ctr #501 635­4 Yeogsam­Dong, Kangnam­Gu, Seoul, SouthKorea, 135­703

Website: http://www.springerlink.com/content/1229­9197/12/6/

Category:

­

SCOPUS Indexed JournalsSCOPUS indexed IJAER publish paper International journals -peer review

I.D.G Ary Subagia

Authors

Publication date

Journal

Volume

Issue

Pages

Publisher

Description

Total citations

Scholar articles

Hybrid multi­scale basalt fiber­epoxy composite laminate reinforced with Electrospun polyurethane nanofiberscontaining carbon nanotubes

IDG Ary Subagia, Zhe Jiang, Leonard D Tijing, Yonjig Kim, Cheol Sang Kim, Jae Kyoo Lim

2014/6/1

Fibers and Polymers

15

6

1295­1302

The Korean Fiber Society

Abstract In this study, we report the fabrication and evaluation of a hybrid multi­scale basalt fiber/epoxy composite laminate reinforced with layers of electrospun carbon nanotube/polyurethane (CNT/PU) nanofibers. Electrospun polyurethane mats containing 1, 3 and 5 wt% carbon nanotubes (CNTs) were interleaved between layers of basalt fibers laminated with epoxy through vacuum­assisted resin transfer molding (VARTM) process. The strength and stiffness of composites for each configuration were tested by tensile and flexural tests, ...

Cited by 4

Hybrid multi­scale basalt fiber­epoxy composite laminate reinforced with Electrospun polyurethane nanofiberscontaining carbon nanotubesIDGA Subagia, Z Jiang, LD Tijing, Y Kim, CS Kim… ­ Fibers and Polymers, 2014Cited by 4 ­ Related articles ­ All 5 versions

2015

Scholar Edit Export

Web Images More… arsubmt@gmail.com

Submission author:Assignment tit le:Submission tit le:

File name:File size:

Page count:Word count:

Character count:Submission date:

Submission ID:

Digital ReceiptThis receipt acknowledges that Turnitin received your paper. Below you will f ind the receiptinf ormation regarding your submission.The f irst page of your submissions is displayed below.

I.d.g Ary SubagiaInternasionalHybrid Multi-scale Basalt Fiber-epo…aper_in_Fibers_and_Polymers_Vol…802.48K85,37127,73202-Feb-2016 04:09AM626536372

Copyright 2016 Turnitin. All rights reserved.

Hybrid Multi-scale Basalt Fiber-epoxy Composite LaminateReinforced with Electrospun

Polyurethane NanofibersContaining Carbon Nanotubes

by I.d.g Ary Subagia

FILE

TIME SUBMITTED 02-FEB-2016 04:09AMSUBMISSION ID 626536372

WORD COUNT 5371CHARACTER COUNT 27732

APER_IN_FIBERS_AND_POLYMERS_VOL.15,NO.6,PP.1295-1302,2014.6.PDF (802.48K)

15%SIMILARITY INDEX

5%INTERNET SOURCES

14%PUBLICATIONS

2%STUDENT PAPERS

1 1%

2 1%

3 1%

Hybrid Multi-scale Basalt Fiber-epoxy Composite LaminateReinforced with Electrospun Polyurethane NanofibersContaining Carbon NanotubesORIGINALITY REPORT

PRIMARY SOURCES

Tijing, Leonard D., Chan-Hee Park, Woo LimChoi, Michael Tom G. Ruelo, AltangerelAmarjargal, Hem Raj Pant, Ik-Tae Im, andCheol Sang Kim. "Characterization andmechanical performance comparison ofmultiwalled carbon nanotube/polyurethanecomposites fabricated by electrospinning andsolution casting", Composites Part BEngineering, 2013.Publicat ion

Koronis, G., A. Silva, and A. P. Soares Dias."Development of green compositesreinforced with ramie fabrics: Effect of agingon mechanical properties of coated anduncoated specimens", Fibers and Polymers,2014.Publicat ion

Chung, Jihee, and Seungsin Lee."Development of nanofibrous membraneswith far-infrared radiation and theirantimicrobial properties", Fibers and

4 1%

5 1%

6 1%

7 <1%

8 <1%

9 <1%

Polymers, 2014.Publicat ion

Park, Chan-Hee, Seung-Ji Kang, Leonard D.Tijing, Hem Raj Pant, and Cheol Sang Kim."Inductive heating of electrospunFe2O3/polyurethane composite mat underhigh-frequency magnetic f ield", CeramicsInternational, 2013.Publicat ion

wings.buffalo.eduInternet Source

journals.lww.comInternet Source

Bozkurt, Ömer Yavuz. "Hybridization effectson tensile and bending behavior ofaramid/basalt f iber reinforced epoxycomposites", Polymer Composites, 2015.Publicat ion

Ary Subagia, I. D. G., and Yonjig Kim. "Astudy on flexural properties of carbon-basalt/epoxy hybrid composites", Journal ofMechanical Science and Technology, 2013.Publicat ion

Jung, Hana, and Yonjig Kim. "Mode I fracturetoughness of carbon-glass/epoxy interplyhybrid composites", Journal of MechanicalScience and Technology, 2015.Publicat ion

10 <1%

11 <1%

12 <1%

13 <1%

Amarjargal, Altangerel, Leonard D. Tijing, HoKyong Shon, Chan-Hee Park, and CheolSang Kim. "Facile in-situ growth of highlymonodispersed Ag nanoparticles onelectrospun PU nanofiber membranes:Flexible and high efficiency substrates forsurface enhanced Raman scattering",Applied Surface Science, 2014.Publicat ion

Tijing, Leonard D., Altangerel Amarjargal,Zhe Jiang, Michael Tom G. Ruelo, Chan-HeePark, Hem Raj Pant, Dong-Won Kim, DongHwan Lee, and Cheol Sang Kim."Antibacterial tourmalinenanoparticles/polyurethane hybrid matdecorated with silver nanoparticles preparedby electrospinning and UV photoreduction",Current Applied Physics, 2013.Publicat ion

archive.orgInternet Source

Cai, Ning, Qin Dai, Zelong Wang, XiaogangLuo, Yanan Xue, and Faquan Yu."Preparation and properties ofnanodiamond/poly(lactic acid) compositenanofiber scaffolds", Fibers and Polymers,2014.Publicat ion

Springer Series in Materials Science, 2015.

14 <1%

15 <1%

16 <1%

17 <1%

18 <1%

19 <1%

20 <1%

Publicat ion

www.ijoer.inInternet Source

"Introduction", Solid Mechanics and ItsApplications, 2006Publicat ion

Kang, Seung-Ji, Leonard D. Tijing, Bo-sangHwang, Zhe Jiang, Hak Yong Kim, and CheolSang Kim. "Fabrication and photocatalyticactivity of electrospun nylon-6 nanofiberscontaining tourmaline and titanium dioxidenanoparticles", Ceramics International, 2013.Publicat ion

Submitted to iGroupStudent Paper

Xuebin Feng. "Preparation andcharacterization of functionalized carbonnanotubes/poly(phthalazinone ether sulfoneketone)s composites", Polymer Composites,04/2009Publicat ion

Ling Liu. "Mode II interlaminar delaminationof composite laminates incorporating withpolymer ultrathin f ibers", PolymerComposites, 03/2008Publicat ion

Submitted to National University of

21 <1%

22 <1%

23 <1%

24 <1%

25 <1%

26 <1%

27 <1%

SingaporeStudent Paper

Jiaoxia Zhang. "The Synthesis of Gel-LikeHybrid Nanomaterials Based on CarbonNanotube Decorated with MetalNanoparticles at 45°C", Soft Materials,01/2010Publicat ion

docslide.netInternet Source

Zhou, Zhengping, Xiang-Fa Wu, and HaoqingHou. "Electrospun carbon nanofibers surface-grown with carbon nanotubes and polyanilinefor use as high-performance electrodematerials of supercapacitors", RSCAdvances, 2014.Publicat ion

nepis.epa.govInternet Source

Jensen, R.E.. "Inorganic-organic f iber sizingsfor enhanced energy absorption in glassfiber-reinforced composites intended forstructural applications", Composites Scienceand Technology, 200603Publicat ion

Amarjargal, Altangerel, Leonard D. Tijing,Michael Tom G. Ruelo, Dong Hwan Lee, andCheol Sang Kim. "Facile synthesis and

28 <1%

29 <1%

30 <1%

31 <1%

32 <1%

33 <1%

immobilization of Ag–TiO2 nanoparticleson electrospun PU nanofibers by polyoltechnique and simple immersion", MaterialsChemistry and Physics, 2012.Publicat ion

Park, C. H., C. H. Kim, H. R. Pant, L. D. Tijing,M. H. Yu, Y. Kim, and C. S. Kim. "An angledrobotic dual-nozzle electrospinning set-up forpreparing PU/PA6 nanofiber composites",Textile Research Journal, 2012.Publicat ion

"Findings on Nanoparticles Discussed byInvestigators at Chonnam National University(Stability of Fe", Science Letter, Jan 30 2015IssuePublicat ion

amsdottorato.unibo.itInternet Source

www.toxicology.orgInternet Source

Kim, Moo Kon, Hyo Won Kwak, Hyung HwanKim, Tae Rin Kwon, So Young Kim, BeomJoon Kim, Young Hwan Park, and Ki HoonLee. "Surface modification of silk f ibroinnanofibrous mat with dextran for wounddressing", Fibers and Polymers, 2014.Publicat ion

Hubert, Paul J. Kathiresan, Krishna Waka.

34 <1%

35 <1%

36 <1%

37 <1%

38 <1%

"Filler exfoliation and dispersion inpolypropylene/as-received graphitenanocomposites via cryogenic", PolymerEngineering and Science, Nov 2011 IssuePublicat ion

Mohammadzadehmoghadam, Soheila, YuDong, and Ian Jeffery Davies. "Recentprogress in electrospun nanofibers:Reinforcement effect and mechanicalperformance", Journal of Polymer SciencePart B Polymer Physics, 2015.Publicat ion

Laird, Eric, Matthew Hood, and ChristopherLi. "Cooperative Interaction, Crystallization,and Properties of Polymer–Carbon NanotubeNanocomposites", Advanced Materials andTechnologies, 2013.Publicat ion

www.thefibersociety.orgInternet Source

Shang-lin Gao. "Glass Fibers with CarbonNanotube Networks as MultifunctionalSensors", Advanced Functional Materials,05/05/2010Publicat ion

Wang, Zelong, Ning Cai, Dongpeng Zhao, JiaXu, Qin Dai, Yanan Xue, Xiaogang Luo, YuanYang, and Faquan Yu. "Mechanicalreinforcement of electrospun water-soluble

39 <1%

40 <1%

41 <1%

42 <1%

43 <1%

polymer nanofibers using nanodiamonds",Polymer Composites, 2013.Publicat ion

www.freepatentsonline.comInternet Source

Wang, Shaokai, Rebekah Downes, CharlesYoung, David Haldane, Ayou Hao, RichardLiang, Ben Wang, Chuck Zhang, and RobMaskell. "Carbon Fiber/Carbon NanotubeBuckypaper Interply Hybrid Composites:Manufacturing Process and TensileProperties : Carbon Fiber/Carbon NanotubeBuckypaper Interply…", AdvancedEngineering Materials, 2015.Publicat ion

repositorium.sdum.uminho.ptInternet Source

Munkhbayar, B., Md.Riyad Tanshen,Jinseong Jeoun, Hanshik Chung, and HyominJeong. "Surfactant-free dispersion of silvernanoparticles into MWCNT-aqueousnanofluids prepared by one-step techniqueand their thermal characteristics", CeramicsInternational, 2013.Publicat ion

Roy, N.. "Modifications of carbon for polymercomposites and nanocomposites", Progressin Polymer Science, 201206Publicat ion

44 <1%

45 <1%

46 <1%

47 <1%

48 <1%

Guo, Heng, Yingqing Zhan, Zhiran Chen,Fanbin Meng, Junji Wei, and Xiaobo Liu."Decoration of basalt f ibers with hybridFe3O4 microspheres and their microwaveabsorption application in bisphthalonitrilecomposites", Journal of Materials ChemistryA, 2013.Publicat ion

Chen, W.. "Basalt f iber-epoxy laminates withfunctionalized multi-walled carbonnanotubes", Composites Part A, 200908Publicat ion

Sarkar, Niladri, Gyana R. Sahoo, and Sarat K.Swain. "Nano silicon carbide embodied soyprotein bionanocomposites", PolymerComposites, 2016.Publicat ion

Gauvin, Florent, Patrice Cousin, and MathieuRobert. "Improvement of the interphasebetween basalt f ibers and vinylester by nano-reinforced post-sizing", Fibers and Polymers,2015.Publicat ion

Nirmala, Rajkumar, Duraisamy Kalpana,Rangaswamy Navamathavan, Mira Park, HakYong Kim, and Soo-Jin Park. "Antimicrobialactivity of electrospun polyurethanenanofibers containing composite materials",Korean Journal of Chemical Engineering,

49 <1%

50 <1%

51 <1%

52 <1%

2014.Publicat ion

Palmeri, M.J.. "Multi-scale reinforcement ofCFRPs using carbon nanofibers", CompositesScience and Technology, 20110117Publicat ion

Karabanova, L.V.. "Microstructure changes ofpolyurethane by inclusion of chemicallymodified carbon nanotubes at low fillercontents", Composites Science andTechnology, 20120502Publicat ion

Lee, Yang Doo, Keunsoo Lee, Byung HyunKang, Ki-Young Dong, Chae-Min Ban, Won-Seok Kim, and Byeong-Kwon Ju. "Fieldemission characteristics of patterned carbonnanotubes on metal substrate", 25thInternational Vacuum NanoelectronicsConference, 2012.Publicat ion

Chen, Qi, Yong Zhao, Zhengping Zhou, ArifurRahman, Xiang-Fa Wu, Weidong Wu, TaoXu, and Hao Fong. "Fabrication andmechanical properties of hybrid multi-scaleepoxy composites reinforced withconventional carbon fiber fabrics surface-attached with electrospun carbon nanofibermats", Composites Part B Engineering, 2013.Publicat ion

53 <1%

54 <1%

55 <1%

56 <1%

57 <1%

58 <1%

www.e-sciencecentral.orgInternet Source

Li, Min, Yizhuo Gu, Yanan Liu, Yanxia Li, andZuoguang Zhang. "Interfacial improvement ofcarbon fiber/epoxy composites using asimple process for depositing commerciallyfunctionalized carbon nanotubes on thefibers", Carbon, 2013.Publicat ion

España, J.M., M.D. Samper, E. Fages, L.Sánchez-Nácher, and R. Balart. "Investigationof the effect of different silane couplingagents on mechanical performance of basaltf iber composite laminates with biobasedepoxy matrices", Polymer Composites, 2013.Publicat ion

Hu, Wei, Mingyao Zhang, Minh-Tan Ton-That, and Tri-dung Ngo. "A comparison offlax shive and extracted flax shive reinforcedPP composites", Fibers and Polymers, 2014.Publicat ion

Ferreira, J. A. M., P. N. B. Reis, J. D. M.Costa, and C. Capela. "Assessment of themechanical properties of nanoclaysenhanced low Tg epoxy resins", Fibers andPolymers, 2014.Publicat ion

Kim, M.. "Processing, characterization, and

59 <1%

60 <1%

61 <1%

62 <1%

EXCLUDE QUOTES OFFEXCLUDEBIBLIOGRAPHY

ONEXCLUDE MATCHES OFF

modeling of carbon nanotube-reinforcedmultiscale composites", Composites Scienceand Technology, 200903Publicat ion

Farahani, R.D.. "Micro-infiltration of three-dimensional porous networks with carbonnanotube-based nanocomposite for materialdesign", Composites Part A, 201112Publicat ion

Sun, L.. "Energy absorption capability ofnanocomposites: A review", CompositesScience and Technology, 200911Publicat ion

Seungjin Han. "Mechanical energy dissipationusing carbon fiber polymer–matrix structuralcomposites with f iller incorporation", Journalof Materials Science, 11/02/2011Publicat ion

Chen, Q.. "Hybrid multi-scale epoxycomposite made of conventional carbon fiberfabrics with interlaminar regions containingelectrospun carbon nanofiber mats",Composites Part A, 201112Publicat ion