MCC - Mobile Climate Control

AFTERMARKET HVAC PRODUCT GUIDE

MCC Mobile Climate Control

Heavy Duty Vehicle Applications

mcc-hvac.com

© Mobile Climate Control 1

- Table of Contents -

I. Split System Air Conditioning ... .....................................................................................................2

II. Convectors .................................................................................................................................33

III. Heaters ......................................................................................................................................46

IV. Compact Air Conditioning ............................................................................................................70

V. Compact Condensers ................................................................................................................100

VI. Louvers ....................................................................................................................................112


V. S

plit

Syst

em A

ir C

ondi

tioni

ng


Evaporator EM-1

A high performance free blow evaporator capable of covering a broad range of applications, the EM-1’s low profile makes it

an attractive compliment to commercial or school bus interiors. Advanced engineering, incorporating transverse blower

technology, delivers a high volume of evenly dispersed conditioned air for total passenger comfort regardless of one’s location

in the vehicle. The service friendly design allows easy access for removal, cleaning, and/or replacement of the reusable air

filter.

Features Benefits

• Transverse blower technology • Provides uniform air flow across the slanted coil which increases evaporator performance and efficiency.

• Offers unparalleled 10,000 hours usage

• Flexible to fit any application

• Strength and durability

• Maximum capacity and efficiency

• Lowest noise levels and maximum air throw

• New extreme long life motors

• Available for front and rear ceiling mount

• Galvanized steel frame

• State of the art enhanced coil

• Attractive plastic cover available in two colors


Technical Data

Cooling capacity60000 Btu/hr (15.1 kW) IMACA [1]

27000 Btu/hr (6.8 kW) ARI [2]

Max amperage requirement 27 A @ 13.5 V dc (High Speed) Voltage

Air flow 709 CFM (1205 m³/hr) [3]

Refrigerant R134a

Length 41.25 (1048 mm)

Width 19.13 (486 mm)

Height 7.73 (196 mm)

Weight 59 lbs (27 kg)

Condensate drain connection ½ (12.7 mm) O.D (doal drains)

Cover color Snow White or Dove Gray

[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions:: 95°F (35°C) / 80°F (27°C) / 50% RH[3] Airflow is tested at super high speed with cover and louvers fully installed, 0” static, 13.5 VDC


Evaporator EM-2

Features Benefits





• Maximum capacity and efficiency







A high performance free blow evaporator well suited for mid-sized commercial, or Type- A school bus applications. The

EM-2’s low profile makes it an attractive compliment to any vehicle’s interior. The advanced engineering of transverse blower

technology delivers a high volume of evenly dispersed conditioned air for total passenger comfort regardless of one’s location

in the vehicle. The service friendly design allows easy access for removal, cleaning, and/or replacement of the reusable air

filter.


Technical Data


18500 Btu/hr (4.7 kW) ARI [2]


Air flow 552 CFM (938 m³/hr) [3]

Refrigerant R134a

Length 32.66 (829 mm)

Width 19.13 (486 mm)





[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions:: 95°F (35°C) / 80°F (27°C) / 50% RH[3] Airflow is at tested super high speed with cover and louvers fully installed, 0” static, 13.5 VDC


Evaporator EM-3

Features Benefits

• Multi speed, high efficiency blowers

• Available for front or rear ceiling mount

• Heavy duty construction with galvanized steel frame and blower housing

• Maximum airflow on high speed



A high performance free blow evaporator providing capacity requirements of longer length commercial bus applications,

and for use in extreme heat conditions. The EM-3 can be configured in single or dual refrigerant circuits, providing a

flexible solution to increased capacity from a single evaporator. The EM-3 is also available with an optional heat function.


Technical Data

Cooling capacity 86000 Btu/hr (21.7 kW) IMACA [1]

Heating capacity (Optional Feature) 70000 Btu/hr (17.7 kW)

Air flow 1322 CFM (2247 m³/hr) [2]

Max amperage requirement 43.9 A @ 13.5 V dc (High Speed) Voltage

Refrigerant R134a

Length 59.38 (1508 mm)

Width 22.75 (578 mm)

Height 9.9 (251 mm)

Weight 98 lbs (44.5 kg)

Condensate drain connection 5/8” (12.7 mm) O.D (doal drains)

Cover color Dove Gray

[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] Airflow is tested at super high speed with cover and louvers fully installed, 0” static, 13.5 VDC


Evaporator EM-7

Features Benefits











A high performance free blow evaporator well suited for shorter wheelbase commercial; or paratransit vehicles. It can also

be used in applications requiring an increase in overall capacity. The EM-7’s low profile and small footprint allow for various

placement options while visually blending smoothly within any vehicle’s passenger compartment. The service friendly design

allows easy access for removal, cleaning, and/or replacement of the reusable air filter.


Technical Data


13700 Btu/hr (3.5 kW) ARI [2]


Air flow 376 CFM (640 m³/hr) [3]

Refrigerant R134a

Length 25.39 (645 mm)

Width 19.13 (486 mm)





[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions:: 95°F (35°C) / 80°F (27°C) / 50% RH[3] Airflow is tested at super high speed with cover and louvers fully installed, 0” static, 13.5 VDC


Evaporator EM-9

The EM-9 ceiling mount air conditioning evaporator has also been engineered for maximum serviceability and ease of

installation in commercial and school buses. Because the drain pan is part of the basic system, the EM-9 can be completely

installed, charged and tested before the cover is put in place, greatly reducing installation time. Simple cover removal

provides ready access to all serviceable components. This evaporator is available for ducted applications only up to 35”

(889 mm) passenger areas.

Features

• Heavy duty steel frame is reinforced for added strength

• High volume air flow that delivers performance in to any shape of duct work

• State of the art enhanced coils for maximum cooling capacity and increased efficiency

• Flexible mounted positions offer airflow where you need it

• Three speed blower allows for full air flow adjustment to optimize system to individual cooling preferences

• Unit incorporates coil freeze up protection. The result is increased trouble free compressor life

• Return air filter can be removed and cleaned without removing the unit cover


Cooling capacity

Air flow

Refrigerant

Length

Width

Height

Weight

Condensate drain connection

Max amperage requirement

Voltage

Cover color

Technical Data

60000 Btu/hr (17.5 kW) IMACA[1] 27000 Btu/hr (8 kW) ARI[2]

1600 CFM (2718 m3/hr)

R134a

41.75” (1060 mm)

13.125” (333 mm)

9” (228 mm)

85 lbs (38.5 kg)

½” (12.7 mm) O.D

37.5 A @ 13.5 V dc (High Speed)

12 or 24 VDC

Snow White or Dove Gray [1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions: 95°F (35°C) / 80°F (27°C) / 50% RH


Evaporator EM-17

The EM-17 rear ceiling mount air conditioning evaporator has been specifically engineered for use in vehicles with an overall

length of 35 – 40’ (1067 – 1219 cm) and which are used in the severest of climates and operating conditions. This unit was

designed with the term “heavy duty” in mind; from its long life, large frame, transit style motors, to its own power supply

generated by a 24V batteryless alternator, this is the unit that needs to be experienced to be appreciated. It has conquered

transit duty school bus applications in the desert, now let it conquer your unique application.

Features

• Internally enhanced rugged coil design delivers the highest capacity in its class while using R-134a as its refrigerant

• Heavy duty steel frame construction coupled with stain-less steel fasteners equal rugged construction

• The highest air volume in its class is generated by two re buildable 56-series cast frame constructed motors which drive two large diameter metal scroll blower wheels. This is then evenly dispersed through the use of ductwork to provide total passenger comfort

• State of the art electronic controls are incorporated to provide minimum wiring, improved reliability, and maxi-mum protection

• All refrigerant connection points are 0-ring for added leak protection and are coupled with hoses constructed to meet or exceed SAE Spec J2064 Type E

• A vinyl-clad steel cover is included in your choice of two colors (snow white or dove gray) which are custom fit to your vehicles unique contours

• A durable aluminum mesh filter is mounted in an easy to service hinged air return grill for minimized service time and maximum operating time


Cooling capacity

Air flow

Refrigerant

Length

Width

Height

Weight


Current draw

Cooling coil

Motors

Blowers

Blower housings

Expansion valve

Return air filter

Technical Data

130000 Btu/hr (38 kW) IMACA[1] 32760 Btu/hr (9.61 kW) ARI[2]

2400 CFM (4080 m3/hr)

R134a

16” (406.4 mm)

48.75” (1238.3 mm)

15.5” (394 mm)

196 lbs (89 kg)

½” (12.7 mm) O.D

57 amps at 27 VDC (Rated @ high speed and ½” static)

6 rows deep, galvanized steel tube sheets with internally enhanced 0.4” (9.5 mm) diameter copper tubes expanded into 0.006” (0.15 mm) aluminum fins

Fully rebuildable 56 series frame construction capable of a constant duty design life rating of no less than 10000 hours. Motor shafts are a series 300 stainless steel for corrosion resistance. Motors are two speed (hi/low) through use of an external voltage dropping resistor.

Rated at 2060 CFM (3500 m3/hr) @ 0.5” (13 mm) static @ 27 volts and dynamical balanced for quiet operation.

Steel construction coated with a heat-resistant sound dampening foam to aid in noise reduction

Externally equalized right angle valve with a replaceable power head and cage assembly.

The superheat is factory preset

Constructed of a durable aluminum mesh rated to pass FMVSS302

[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions: 95°F (35°C) / 80°F (27°C) / 50% RH


Evaporator IW-1

A high performance free blow evaporator capable of covering a broad range of applications. The “in-wall” unit is designed to

fit within the vehicle bulkhead/cap, providing a “built-in” appearance without being located over a passenger. The sleek

molded cover provides directional airflow for maximum passenger comfort while incorporating a service friendly design that


Features

• Lightweight aluminum frame construction

• Flexible mounting configurations for every make of body

• Integrated motor cover panel for ease of service

• State of the art enhanced coils for maximum cooling capacity

• Flush mount installation provides maximum head clearance and clean OEM appearance

• Easy access hinged return air filter provides for reduced service time


Cooling capacity

Air flow

Refrigerant

Length

Width

Height

Weight



Voltage

Cover color

Technical Data

55000 Btu/hr (16.11 kW) IMACA[1] 27005 Btu/hr (8 kW) ARI[2]

1600 CFM (2718.42 m3/hr)

R134a

43.12” (1095.2 mm)

7.46” (189.5 mm)

13.77” (349.8 mm)

50 lbs (22.7 kg)

½” (12.7 mm) OD


12 or 24 VDC

Snow White or Dove Gray



Evaporator IW-2

A high performance free blow evaporator capable of covering a broad range of applications. The “in-wall” unit is designed to

fit within the vehicle bulkhead/cap, providing a “built-in” appearance without being located over a passenger. The sleek

molded cover provides directional airflow for maximum passenger comfort while incorporating a service friendly design that


Features


• Flexible mounting configurations for every make or body


• State of the art enhanced coils for maximum cooling capacity

• Flush mount installation provides maximum head clearance and clean OEM appearance

• Easy access return air filter provides for reduced service time


Cooling capacity

Air flow

Refrigerant

Length

Width

Height

Weight



Voltage

Cover color

Technical Data

45000 Btu/hr (13.2 kW) IMACA[1] 18500 Btu/hr (5.42 kW) ARI[2]

800 CFM (1359.2 m3/hr)

R134a

33.8” (858.5 mm)

8.30” (211 mm)

12.56” (319 mm)

45 lbs (20.41 kg)

½” (12.7 mm) OD


12 or 24 VDC




Evaporator IW-4

The IW-4 unit frees up the front bulkhead of Thomas Built Buses C2 conventional buses. The IW-4 evaporator can also be

matched with other MCC components to provide a complete air conditioning system that meets your exact vehicle size,

operating mode and climate.

Features



• Enhanced coils for maximum cooling capacity

• Easy access return air filter helps to reduce service time

• Drop in one piece construction simplifies installation time and provides maximum head clearance with a clean OEM appearance


Cooling capacity

Air flow

Refrigerant

Length

Width

Height

Weight



Voltage

Cover color

Technical Data


1500 CFM (2548.5 m3/hr)

R134a

38.10” (967.7 mm)

13.64” (346.5 mm)

10.30” (261.6 mm)

40 lbs (18.1 kg)

½” (12.7 mm) OD


12 or 24 VDC

Snow White or Dove Gray[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH [2] ARI conditions: 95°F (35°C) / 80°F (27°C) / 50% RH


Evaporator IW-10

A high capacity, high performance, free blow evaporator within the smallest amount of space. At close to three inches shorter

than most bulkhead applicable evaporators, the IW-10 is the ideal choice when working within limited space such as over

windows/windshields, and entry/exit doors. The sleek molded cover provides directional airflow for maximum passenger

comfort and incorporates a maintenance friendly return air filter.

Features

• Lightweight aluminum construction

• Flexible mounting configurations

• Enhanced coils for maximum cooling capacity

• Easy access return air filter helps to reduce service time

• Flat or formed ABS cover

• Covers available in white or gray

• Flush mount installation provides maximum head clearance and a clean OEM appearance


Cooling capacity

Air flow

Refrigerant

Length

Width

Height

Weight



Voltage

Cover color

Technical Data


1300 CFM (2208.7 m3)

R134a

43.30” (1100 mm)

7.00” (177.8 mm)

10.19” (25.9 mm)

32 lbs (14.5 kg)

½” (12.7 mm) OD


12 or 24 VDC




A highly efficient, skirt mounted condenser that provides industry leading performance and durability. The heat-fused,

powder coated, steel constructed chassis is built to withstand harsh, rugged, outdoor conditions. The large volume fans

channel air through the coil, while angularly exhausting the hot air downward, preventing the use of hot air in the

recirculation process. The MCC exclusive design allows the sealed unitized fan to be easily serviced, without any cover/panel

removal. The pioneering micro-channel heat exchanger allows for greater heat transfer efficiency, resulting in enhanced

cooling, reducing compressor stress, and promotes overall system longevity.

Condenser CM-2

Features

• Slim Line CM-2 cabinet is constructed using rugged,

powder coated, steel construction

• Zinc coated for added durability and corrosion protection.

• Integrated high pressure safety switch as standard equipment

• Unitized motor/fan package increases service access and decreases service time

• Winter protection package

• Skirt mount or component mount air inlet grill

• 12V or 24V operation

• Stackable kit available

• Plug-n-Play connectors on unit and fan motor provide for ease of installation and motor service

• Incorporated single piece receiver/dryer and system moisture indicator reduced possible leak joints


Capacity

Air flow

Condenser coil

Condenser fans

Fan motors


Safety controls

Receiver filter dryer

Weight

Available color

Technical Data

60000 Btu/hr (17.58 kW) IMACA[1]

900 CFM (1529 m3/hr)

Advanced technology Micro Channel Heat Exchanger (MCHX)

Unitized, low-profile, axial-flow type propeller fans balanced for quiet, vibration-free

operation with finger guard

Totally enclosed, pancake-style, permanent-magnet type with extended-life, permanently

lubricated bearings

14 amps @ 13.5 VDC; 7 amps @ 27.0 VDC

High refrigerant pressure cut-out 400 psi (28 bar); cut-in 300 psi (21 bar)

16 in3 (262 cm3), ½” [#8] Male Insert O-Ring (MIOR)

45 lbs (20.5 kg)

Midnight black[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH








Condenser CM-3

Features

• Micro channel all aluminum coil design for unmatched-heat transfer

• Zink coated for added durability and corrosion protection

• Rugged coated steel construction

• Integrated high pressure safety switch as standard equipment




• 12V or 24V operation


• Incorporated single piece receiver/dryer and system moisture indicator reduced possible leak joints

• Plug-n-Play connectors on unit and fan motor provide for ease of installation and motor service


Slim Line Series Condenser CM-3

Capacity

Air flow

Condenser coil

Condenser fans

Fan motors


Safety controls


Weight

Available color

Technical Data

80000 Btu/hr (23.44 kW) IMACA[1]

1350 CFM (2294 m3/hr)

Advanced technology micro channel heat exchanger (MCHX)

Unitized, low profile, axial flow vector fans balanced for quiet, vibration free operation with finger guard

Totally enclosed, pancake style, permanent-magnet type with extended life, permanently lubricated

bearings

21 amps @ 13.5 VDC; 11.5 amps @ 27.0 VDC


16 in3 (262 cm3), ½” [#8] Male Insert O-Ring (MIOR)

51 lbs (23.2 kg)

Midnight black[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH








Condenser CM-14

Features

• Enhanced Copper Tube and Aluminium fin coil design for unmatched heat transfer coil

• Zinc coated for added durability and corrosion protection

• Rugged coated steel construction

• Integral high pressure switch eliminates high-side com-pressor cycling



• Incorporated single piece combination filter drier and sight glass with system moisture indicator reduces possible leak joints


• 12 V or 24 V operation


• Plug-n-play connectors on unit and fan motor provide for ease of installation and motor service


Condenser CM-14

Capacity

Air flow

Condenser coil

Condenser fans

Fan motors


Safety controls


Weight

Available color

Technical Data

107000 Btu/hr (31.35 kW) IMACA[1]

3200 CFM (5437 m3/hr)

Four rows deep, patented, internally enhanced copper tubes expanded into aluminum fins

Unitized, low-profile, axial-flow vector fans balanced for quiet, vibration-free operation with finger guard

Totally enclosed, pancake style, permanent magnet type with extended life permanently lubricated bearings

29 amps @ 13.5 VDC; 26 amps @ 27.0 VDC


16 in3 (262 cm3)

95 lbs (43.1 kg)

Midnight Black

[1] IMACA conditions: 100°F (38°C) / 90°F (32°C) / 50% RH


Roof Mount Condenser CR-410

Our CR-410 high capacity roof mount condenser has been engineered for use in commercial, light transit and school bus

applications. This unit is the perfect combination of sleek, low profile European styling and American innovation. It has

rugged thermoplastic polyolefin (TPO) cover shrouds and lightweight aluminum structure, while allowing complete service

access without cover removal. The highly adjustable mounting rails are designed to attach this unit to any exterior roof radius

without leaving visible gaps between the roof and unit cover.

MCC’s innovative introduction of the roof mount condenser series to the North American bus market has given body builders

the opportunity to free up skirt mounting space for a variety of options including compressed natural gas (CNG) tanks,

wheelchair lifts and luggage compartments, while maintaining an aerodynamic exterior appearance to the vehicle. Our

CR-410 roof mount condenser is the solution to road salt damage.

Features Benefits

• Designed for use with R134a Refrigerant • Lower cost, less weight, environmentally friendly

• Utilizes micro channel aluminum coil • Improved performance/ efficiency, reduced weight, reduced refrigerant charge, increased compressor life

• Thermoplastic Polyolefin (TPO) plastic cover • Durable, lightweight, flexible, UV resistant housing

• Multiple unit configurations available• Allows unit to be used in various mounting applications and on various body types/ roof contours

• Heavy gauge aluminum frame • Corrosion resistant, lightweight base

• Exterior visible sight glass and moisture indicator without cover removal • Ability to view for service/ maintenance purposes while saving time

• O-Ring refrigerant connections • Reduced risk of refrigerant leaks

• Multiple available options and upgrades • Brushless fan motors, branch and winter guard kits just to name a few


Technical Data

Capacity 82000 Btu/hr (24 kW) IMACA[1] 57000 Btu/hr (16.7 kW) ARI[2]

Air flow 1680 CFM (2854 m3/hr)

Condenser coil Advanced technology micro channel heat exchanger (MCHX)

Condenser fans Low-profile, axial flow type propeller fans balanced for quiet, vibration free operation with finger guard.

Fan motorsTotally enclosed low profile permanent-magnet 4-pole brushed motors with extended life lubricated sealed bearings.

Max amperage requirement 21 amps @ 13.5 VDC; 11 amps @ 24 VDC

Safety controls High refrigerant pressure cut out 400 psi (28 bar), cut in 300 psi (21 bar)

Filter dryer 16 in3 (262 cm3)


Available color White


CR-410 CHASSIS SHOWN(COVER REMOVED FOR CLARITY)

SIGHT GLASS 26.02[660.9]

6.99[177.6]

44.88[1139.8]

48.12[1222.2]

RIVNUT, 1/4-209 PLCS(COVER SECUREMENT)

CM1 CM2 CM3

5/16-18 THREADED INSERT4 PLCS, EACH SIDE(MOUNTING RAIL SECUREMENT)

5/16-18 THREADED INSERT3 PLCS, EACH END(MOUNTING RAIL SECUREMENT)

MIO #10GAS IN

MIO #8LIQUID OUT

PRESSURE SWITCH CONNECTION2 CAVITY SHROUD CONNECTOR

PACKARD ELECTRIC 12010973MCC P/N 22-01585-00

MALE TERMINALS

2 C AVITY MALE CONNECTORMOLEX 19433-0014

MCC PART NO. 22-50099-278 GA WIRES

POS 1 BLK (+) POS 2 GRN (-)


Roof Mount Condenser CR-430

The CR-430 roof mounted condenser module has been designed to meet the demanding and varied needs of the global HVAC market. The CR-430, with its attractive, lightweight, and low profile design, provides improved condensing performance, reliability, and ease of installation, as compared to its predecessors. The all steel powder coated cabinet construction provides unparalleled strength and reliability, while the attractive TPO, cover with integrated stainless steel grills, helps keep the weight down without sacrificing functionality or reliability. The system utilizes MCC’s signature micro-channel heat exchanger (MCHX) coil technology that delivers maximum capacity through improved heat transfer performance.

Roof mount Air-conditioning condenser module

Features Benefits• Designed for use with R134a Refrigerant • Lower cost, less system weight, environmentally friendly

• Utilizes Micro Channel Condenser Coil (MCHX) • Improved performance/efficiency, reduced weight, reduced refrigerant charge

• Powder coated galvanized steel frame • Increased strength and durability

• TPO plastic cover • Durable, lightweight, flexible, UV resistant

• Large capacity receiver tank(s) w/sight glass •

• Large capacity filter drier(s) (30 cu.in.) • Improved system reliability, cleaner dryer refrigerant and refrigerant oil

• Single loop version includes single liquid line service valve • Allows for low side pump down for ease of service

• Service-ability/Install friendly • Unit was design with install- ability and service ability in mind

• Multiple unit configurations available • Allow unit to be used in various applications and climates

• Available options and upgrades • Brushless fans, branch guards, etc

Increases charge holding capacity for system variation, ease of charge with easy to view sight glass


Technical Data

Condensing capacity 137,000 Btu/hr (37kW) Modeled Max Capacity Condition[1]

Air flow 3-Fan: 3500 CFM (5950 m3/h)

2-Fan: 2400 CFM (4100 m3/h)

Refrigerant R134a

Current 3-Fan: 47 A at 13.5 Vdc / 31 A at 27.5 Vdc

2-Fan: 31 A at 13.5 Vdc / 21 A at 27.5 Vdc

Weight 160lbs (72.5 kg)

Dimensions (LWH) 64.7” x 10” x 48.4”[1] Max Capacity: Air in 100°F/50%RH, refrigerant 140°F DST/170°F, refrig exit. 0°F Sub-Cool


V. C

onve

ctor

s


Convector UC-1

All the heat you need in one light and compact convector Combining modern design and high capacity, the UC-1 single pipe convector is the lightest in MCC’s product range and small enough to fit in tight spaces. The UC-1 Convector is built around a single pipe made of aluminum or copper. This means the convector is very compact and requires a small mounting footprint.

Features

• Suitable for heating in buses and coaches

• Designed for vehicles with water glycol based heating systems

• Quiet and draft free heating

• Maintenance free

• Single pipe for compact design

• Shaped to fit reinforced wall structures


Heat output

Piping

Weight

Maximum length

Color

Technical Data

1604 Btu/hr (0.47 kW) Q60[1] 2661 Btu/hr (0.78 kW) Q100

[1]

Copper or aluminium Ø 1.1” (28 mm) for hose connection

Copper 14 lbs/ft (1.93 kg/m) , aluminium 12 lbs/ft (1.71 kg/m)

197” (5 m)

Silver anodized aluminium

Please contact your MCC representative for more details

[1] The Qx value stands for the power in kW emitted from a unit length (1 m) of the convector at a temperature difference between coolant inlet and room air equal to the subscript (x) .

40

71

28

83

123

60

5

L

CL 7878

50 50

Face is shaped for reinforced wall structure

Dimensions in mm

Convector UC-1


Convector P-90

Highly efficient and comfortable bus heatingThe Convector P-90 is based on a twin copper pipe system that supplies efficient heat in a space saving design. Can be used as a stand alone unit or part of a complete heating system. Transition pieces are available to accommodate bulk heads, wheel wells and doors.

Features

• Suitable for heating buses, coaches and other vehicles

• Designed for vehicles with water/glycol heating systems



• Robust design

• Twin pipe design for optimized heat output


Heat output

Piping

Weight

Maximum length

Color

Technical Data

1880 Btu/hr (0.55 kW) Q60[1] 3347 Btu/hr (0.98 kW) Q100

[1]

Copper Ø 0.8” (22 mm)

25 lbs/ft (3.14 kg/m)

197” (5 m)




Dimensions in mm

L

40 40CL

5,4

80,4

179

66

35,3

158

22

Convector P-90


Convector P-20

Compact design for small spaces

The Convector P-20 is designed for use in small spaces such as boats, caravans, bus sleeping cabins and driver

compartments. The P-20 distributes heat uniformly, creating a comfortable environment with gentle air flow.

The advantage with the P-20 convector, is of course, its small footprint which make maintenance and installation simple.

Features

• Suitable for heating in buses, minivans, caravans, mobile homes and marine applications

• Designed for vehicles with water/glycol heating systems



• Very compact design

• Twin pipe design for optimized heat output


Convector P-20

Technical Data

Output Heat output 384 W/m Q60[1] (640 W/m Q100

{1})

Piping Copper or aluminum Ø 15 mm

Weight Copper 1.54 kg/m, aluminium 1.31 kg/m

Flow rate 0.30 l/m

Depth 32 mm

Height 141 mm

Lengths 250, 500, 750, 1000 mm

Fins Anodized aluminium

[1] The Qx value stands for the power in kW emitted from a unit length (1m) of the convector at a temperature difference between coolant inlet and room air equal to the subscript (x).


Convector UC-9

High heat output at a low weightThe new UC-9 provides efficient heating in a compact design. This convector has been specially designed to deliver maximum heat output. It is designed to fit in buses with reinforced wall structure and comes with the necessary hardware to make in-stallation easy.

Features

• Designed to heat buses, coaches and marine applications

• Suitable for vehicles with water/glycol based heating systems

• High output

• Light and compact



• Twin pipe for optimized heat output

• Shaped to fit reinforced wall structure


Heat output

Piping

Weight

Maximum length

Color

Technical Data

2091 Btu/hr (0.61 kW) Q60 3467 Btu/hr (1 kW) Q100[1]

Copper Ø 0.7” (18 mm) + aluminium with hose connections

Copper 2.6 kg/m, aluminium 2.34 kg/m

197” (5 m)




Dimensions in mm

52,734,3

88

45

108,

4

53,6

174

2x 18

L 5

Convector UC-9


Convector P-200

Efficient bus heatingThe P-200 offers efficient heating and can be integrated with the Whisper 200 family. The P-200 is a twin pipe design made of copper or aluminum that carries glycol based coolant through the convector. This coil can provide up to as much as 714W/m of heat.

Features

• Suitable for heating buses, coaches where highly efficient heating is required

• Designed for vehicles with water/glycol based heating systems

• High output



• Fully compatible with Whisper 200 heaters


Heat output

Piping

Weight

Maximum lengths

Color

Technical Data

2436 Btu/hr (0.71 kW) Q60* 4060 Btu/hr (1.2 kW) Q100*

Copper or aluminum Ø 0.8” (22 mm)

Copper 27 lbs/ft (3.71 kg/m) , aluminium 24 lbs/ft (3.34 kg/m)

197” (5 m)



* The Qx value stands for the power in kW emitted from a unit length (1 m) of the convector at a temperature difference between coolant inlet and room air equal to the subscript (x) .

Dimensions in mm

4340

L 101.8

162,6

186.8

4340

6660

,4

48,6

Ø22

Ø5,4

Convector P-200


Power Convector PC-500

Even temperature distribution, small footprint, numerous layout options and easy to installPC-500 (power convector) is a patented “crossover” product featuring the benefits of a normal convector and that of a fan assisted heating unit. The PC-500 has three operating modes:

Normal convector mode, (free-flow) warm air rises naturally (convection) from the unit.

Fan half-speed mode, (forced-air) draws the air from the top of the unit through the fins and out to the floor. Once on the floor the warm air mixes and rises to the top.

Fan full-speed mode, (forced-air) gives instant heating results by taking maximum heat from the PC 500 and distributing this air all over the floor.

Features• Ideal for buses, coaches and other vehicles

• Designed to work in any climate region

• Can be ordered with one fan (10”/250 mm unit) up to 15 fans (236”/6 m unit)

• Available both 12V and 24V versions

• Covers can be easily removed for maintenance

• Max number of PC-500 in series 3 units connection

• Multiple fans can be mounted according to customer’s heating specifications


Heat output

Piping[2]

Weight Copper

Weight Aluminium

Maximum length

Color

Technical Data

10236 Btu/hr (3kW) Q60 [1]

16378 Btu/hr (4.8 kW) Q100 [1]

θ 0.59” (15 mm)

9.5 lbs (4.3 kg)

8.5 lbs (3.9 kg)

197” (5 m)



1587 Btu/hr (0.46 kW) Q60[1]

2423 Btu/hr (0.71 kW) Q100 [1]

θ 0.59” (15 mm)

8 lbs (3.7 kg)

7 lbs (3.3 kg)

197” (5 m)


Fan Mode – One meter section, 5 fans Radiant Mode – One meter section

[1] The Qx value stands for the power in kW emitted from a unit length (1m) of the convector at a temperature difference between coolant inlet and room air equal to the subscript (x).[2] Custom piping may be available

Note: Dimensions in mm only.

Power Convector PC-500


III. H

eate

rs


Compact under seat heater T12-12807

Compact under seat heater with all aluminum heater core designed for low pressure and low coolant flow, suited for all climates and vehicles. Can also be filled as a stand alone unit for multiple placements. This low cost multi-functional heater will suit all budgets.

Robust, Light weight and Cost Competitive Heater

Features Benefits

• Simple compact design

• Copper/Aluminum heater core

• Single or multi pack use

• Available in 12 and 24 vdc

• Connection in minutes

• Brush or brushless motors

• Light weight

• Adapts to any application

• Many configurations possible due to flexible design

• Simple installation

• Low cost


Technical Data

Heating capacity @ max 60000 Btu/hr (17.6 kW) 70000 Btu/hr option with higher output motor

Length 27.4” (697.8mm)

Width 11” (281mm)

Height 9.2” (234.5mm)


Fans 2 fan

Current Draw (Max) 16.5 amps at 13.5 VDC

Hose Connection: 1” OD Conditions: Ambient temperature 0ºF, Glycol temperature 150ºF, Glycol-water 50-50, Coolant flow rate 8 GPM


Compact under seat Heater T12-12809

Compact under seat heater with all aluminum heater core designed for low pressure and low coolant flow, suited for all climates and vehicles. Can be filled as a stand alone unit for multiple placements. This low cost multi-functional heater will suit all budgets.


Features Benefits


• Copper/Aluminum heater core





• Light weight




• Low cost


Technical Data

Heating capacity @ max 35000 Btu/hr (10.3 kW) 45000 Btu/hr option with higher output motor

Length 16.8” (428.8mm)

Width 11” (281mm)

Height 9.1” (233mm)


Fans 1 fan

Current Draw (Max) 8 amps at 13.5 VDC

Hose Connection: 1” OD[1] Conditions: Ambient temperature 0ºF, Glycol temperature 150ºF, Glycol-water 50-50, Coolant flow rate 8 GPM


Compact under seat heater T12-12811

Compact under seat heater with all aluminum heater core designed for low pressure and low coolant flow, suited for all climates and vehicles. Can be filled as a stand alone unit for multiple placements. This low cost multi-functional heater will suit all budgets.


Features Benefits


• All aluminum heater core





• Light weight




• Low cost


Technical Data

Heating capacity @ max 25000 Btu/hr (7.3 kW) 30000 BTU/hr option with higher output motor

Length 9.8” (249mm)

Width 12.4” (315.7mm)

Height 9.2” (235mm)


Fans 1 fan

Current Draw (Max) 6.7 amps at 13.5 VDC

Hose Connection: 5/8” ODConditions: Ambient temperature 0ºF, Glycol temperature 150ºF, Glycol-water 50-50, Coolant flow rate 8 GPM


Fan Heater Model 201

Features

The compact design of the 201 is ideal for dash or under seat mounting. Air is delivered to sides of unit and can be controlled by air doors.

Part Descriptions: Specifications

Part No. No. Part No. Description No. Part No. Description

Specifications

12-010312-0102

1234567

89

10111213

24-013524-013624-013724-013323-000924-013824-0113

24-017225-010525-010725-002328-001422-004225-0095

Heating -13500 Btu/hr (3960 W) Air Flow -185 CFM (315 m3/h) Current -5.8 Amps/12V -2.9 Amps/24VWeight -7.5 lbs. (3.4 kg) 3-Speed operated motor.

Heater 12VHeater 24V

CasingCoverCoverMounting BracketDoor (3 Pcs.) VenturiMotor Bracket

Coil ProtectorMotor 12VMotor 24VFanGrommetHeater CoilResistor


Blower Heater Model 202

Features

The 202 offers flexible installation options to fit a wide range of applications. Can be ducted for defrost capabilities.



Specifications

12-020312-021312-020412-021412-0293

1234

5

6

7

7A

7B7C

7D7E8910

111213

14

24-000924-000824-001222-0014

22-0021

22-0024

15-050315-050425-007025-007525-001725-0021

25-002225-002028-001028-001328-0005

24-006024-004524-006624-006723-011023-0125

Heating - 24700 Btu/hr (7240 W) Air Flow - 295 CFM (500 m3/h) Current - 12 Amps/12V - 6 Amps/24VWeight - 9 lbs. (4 kg) 3-Speed motor.

Heater 12V - Rear Conn.Heater 12V - Side Conn.Heater 24V - Rear Conn.Heater 24V - Side Conn.Heater 12V - Bottom Conn.

CasingCoverMounting BracketHeater Coil(Side Conn.) Heater Coil (Bottom Conn.) Heater Coil(Rear Conn.) Blower Assy. 12VBlower Assy. 24VMotor 12VMotor 24VBlower HousingBlower Wheel

ClipMotor TapeSnap-in PlugSnap-in PlugGrommet(Rear Conn.) GrillGrillFront (4 x 2” HA) Front (4 x 2 1/2” HA) Hose Adapter 2”Hose Adapter 2 1/2”

Items 11-14 are optional and have to be ordered separately.



Features

A more heavy duty option than the 202. The 205 offers the same installation flexibility.



Specifications

12-050312-0504

123456

6A

6B6C6D6E

78910

11

24-022524-022624-019924-013322-006015-050315-050425-007025-007525-002125-001725-002225-0020

28-001424-006024-004524-006624-006723-011023-0125

HeatingAir FlowCurrent

Weight3-Speed motor.


CasingCoverGrillMounting BracketHeater CoilBlower Assy. 12VBlower Assy. 24VMotor 12VMotor 24VBlower WheelBlower HousingClipMotor Tape

GrommetGrill Grill Front (4 x 2”HA) Front (4 x 2 1/2”HA) Hose Adapter 2”Hose Adapter 2 1/2”

Items 8-11 are optional and have to be ordered separately.

- 24700 Btu/hr (7240 W) - 295 CFM (500 m³/h) - 12 Amps/12V- 6 Amps/24V- 13.5 lbs. (6 kg)



Features

High capacity design can be used as auxiliary heater for bus, or as stand alone cab heater.


Part No. No. Part No. Description

Specifications

12-090312-0904

123456

78

24-035324-035424-035524-013324-022325-034425-010725-012122-0029

Heating - 32000 Btu/hr (9380 W) Air Flow - 350 CFM (595 m3/h) Current - 12 Amps/12V - 6 Amps/24VWeight - 25.5 lbs. (11.5 kg) 2-Speed motor.


CasingCoverGrillMounting BracketMotor BracketMotor 12VMotor 24VFan C.W. (8”) Heater Coil



Features

Similar design as our popular 201. The 211 offers a higher quality heater with controllable air doors.



Specifications

12-110312-1104

12345678

9

10111213

24-014024-014224-014324-013323-000924-014124-011324-0171

25-010525-010725-002328-001422-002325-0095

Heating -21000 Btu/hr (6150 W) Air Flow -265 CFM (450 m3/h) Current -5.8 Amps/12V -2.9 Amps/24VWeight -9 lbs. (4 kg) 3-Speed motor.


CasingCoverCoverMounting BracketDoor (3 Pcs.) VenturiMotor BracketCoil Protector

Motor 12VMotor 24VFanGrommetHeater CoilResistor



Features

A higher capacity heater than the 202 and 205, the 212 equipped with hose adapters offers installation flexibility for defrosting and cab ducting requirements.



Specifications

12-120312-120412-122312-1224

12345678

9

9A

9B9C9D9E

24-005524-005624-101123-012524-005724-005824-001222-0090

15-151315-151425-005325-007625-004825-034825-006025-020025-0022Heating -36000 Btu/hr (10550 W)

Air Flow -400 CFM (680 m3/h) Current -14 Amps/12V -8 Amps/24VWeight -12 lbs. (5.5 kg) 3-Speed motor.

Heater 12V (w.24-0056) Heater 24V (w.24-0056) Heater 12V (w.24-1011) &Heater 24V (w.23-0125) (5x)

CasingCoverCover (5 HA’s) Hose Adapter 2 1/2”Coil BracketCoil BracketMounting BracketHeater Coil

Blower Assy. 12VBlower Assy. 24VMotor 12V, 3-SpeedMotor 24V, 3-SpeedBlower HousingHousing TopVenturiBlower WheelClip (B.W.)



Features

Slim design allows for mounting in tight spots. Can be wall mounted with heater connectors exiting the back of the unit.



Specifications

12-130112-1302

1234567

24-112024-112125-112222-019624-011025-002325-010525-0107

Heating -12500 Btu/hr (3660 W) Air Flow -150 CFM (255 m3/h) Current - 5.8 Amps/12V - 2.9 Amps/24VWeight - 7 lbs. (3.2 kg) 2-Speed motor.


CasingCoverFan GuardHeater CoilMotor BracketFanMotor 12VMotor 24V



Features

With a larger capacity than the 213, the 214 offers flexible mounting solutions for wall mount situations. Fittings exit the side of the 214.



Specifications

12-141112-1412

1234

5678

24-004224-004322-007325-003925-004325-001528-001425-002825-0067

Heating -18500 Btu/hr (5420 W) Air Flow -175 CFM (300 m3/h) Current -4.4 Amps/12V -2.2 Amps/24Weight -9 lbs. (4 kg) 3-Speed motor and internally grounded.


CasingCoverHeater CoilMotor 12VMotor 24VFanGrommetSwitchKnob



Features

High capacity heating solution for buses, fire trucks and truck bodies. The 216 delivers maximum performance for large capacity heating requirements.



Specifications

12-160112-160212-162112-1622

12345

6

7

89101112

24-013024-013124-013224-010524-014624-016224-016322-003822-0039

25-010525-010724-011025-002328-001028-000428-0011Heating -42000 Btu/hr (12300 W)

Air Flow -500 CFM (850 m3/h) Current -11.6 Amps/12V -5.8 Amps/24VWeight -18.5 lbs. (8.4 kg) 2-Speed motor.

Heater 12V -R.H.C.Heater 24V -R.H.C.Heater 12V -B.C.Heater 24V -B.C.

CasingGrill (Inlet) Front (Outlet) CoverCoil SupportCoil Support (B.C.) Coil Support (B.C.) Heater CoilHeater Coil (B.C.)

Motor 12VMotor 24VMotor BracketFanSnap-in PlugGrommetSnap-in Plug



Features

The compact design of the 222 is ideal for dash or under seat mounting.



Specifications

12-225112-2252

12345678

91011

24-016724-014224-016124-013324-014124-011024-017125-010525-010725-002322-003328-0014

Heating -21000 Btu/hr (6150 W) Air Flow -265 CFM (450 m3/h) Current -5.8 Amps/12V -2.9 Amps/24VWeight -9 lbs. (4 kg) 2-Speed motor.


CasingCoverCoverMounting BracketVenturiMotor BracketCoil ProtectorMotor 12VMotor 24VFanHeater CoilGrommet



Features

The 226 was designed to offer flexible mounting and deliver air directly out front of the heater.



Specifications

12-2611 1234567891011

24-017324-013624-016024-013324-013824-011024-017225-010525-002322-005228-0014

Heating -13500 Btu/hr (3960 W) Air Flow -185 CFM (315 m3/h) Current -5.8 AmpsWeight -4.5 lbs. (2 kg) 2-Speed motor.

Heater 12V Side PlateCoverCoverMounting BracketVenturiMotor BracketCoil ProtectorMotor 12VFanHeater CoilGrommet


Low Amp Heater Model 234



Specifications

12-342112-3422

12345

24-110524-110624-110724-004125-017225-0244

Heating Air Flow Current

Weight

- 3425 Btu/hr (1000 W)- 60 CFM (102 m3/h)- 0.35 Amps/12V- 0.18 Amps/24V- 3 lbs. (1.36 kg)

Features

The low amp current of the 234HD allows for mounting in applications such as motor homes, where an auxiliary heater is required.


Casing (Front) Casing (Rear) Mounting BracketHeater CoilFan 12VFan 24V



Features

The 238 is ideal for underseat mounting. Air is disbursed to the front of the unit.



Specifications

12-381112-3812

12345

6789

24-014724-014824-014922-011025-010525-010725-004125-011029-003928-0014

Heating -22500 Btu/hr (6600 W) Air Flow -250 CFM (425 m3/h) Current -4 Amps/12V -2 Amps/24VWeight -11.5 lbs. (5.2 kg) 2-Speed motor.


CasingTop CoverSide CoverHeater CoilMotor 12VMotor 24VFanMotor BracketRetaining RingGrommet



Features

The 239 is our largest capacity fan heater - ideal for buses and other large capacity requirements.



Specifications

12-390312-3904

1234567

89

24-035624-035724-013324-035824-022322-003025-034425-010725-012128-0004

Heating - 64000 Btu/hr (18760 W) Air Flow - 800 CFM (1360 m3/h) Current - 13 Amps/12V - 6.5 Amps/24VWeight - 25 lbs. (11.3 kg) 2-Speed motor.


CasingCoverMounting BracketGrillMotor BracketHeater CoilMotor 12VMotor 24VFan (8” C.W.) Grommet



Features

The 245 offers the ability to control fan speed with a control on the box. Ideal for auxiliary heaters or small cab applications.



Specifications

12-450312-4504

123456789

101112131415

16

22-014023-004823-000923-004524-011024-017524-089024-089124-0892

24-089324-089425-002325-002925-006725-010525-010728-0014

Heating -20000 Btu/hr (5860 W) Air Flow -265 CFM (450 m3/h) Current -5.8 Amps/12V -2.9 Amps/24VWeight -8.5 lbs. (3.8 kg) 2-Speed motor.Heater is internally grounded.


Heater CoilAdapterDoorLouverMotor BracketBaseCoil ProtectorCoverSide (L)

Side (R) VenturiFan (6.6” C.C.W.) SwitchKnobMotor 12VMotor 24VGrommet


Low Amp Heater Model 247

Features

The 247 is another option for low amp heater requirements.



Specifications

12-470112-4702

12345

24-111424-111524-001222-017125-017225-0144

Heating -8700 Btu/hr (2550 W) Air Flow -130 CFM (220 m3/h) Current -0.70 Amps/12V -0.35 Amps/24VWeight -6.1 lbs. (2.8 kg) 1-Speed motor.


CasingCoverMounting BracketHeater CoilFan 12VFan 24V


Fan Heater Electric Model 290N (North America only)


Specifications No. Part No. Description No. Part No. Description

Heating

Air flowCurrentWeight

2kW (36V)1.6kW (48V)220 CFM (339.8m3/h)55A (36V)42A (48V)18 lbs. (8.16kg)

34566788

23-014523-017125-043525-116025-116925-137225-148125-2459

LouverLouverKnobHeater Element 48VHeater Element 36VCircuit Breaker 8A/80VCirucit Breaker 50A/80VCircuit Breaker 60A/80V

11121314151617

25-120425-137325-176025-176124-479624-479728-0722

ContactorResistor 10Ω (12-9038)Resistor 4Ω (12-9050)Resistor 2.5Ω (12-9038/12-9050)Casing Stainless SteelCover Stainless SteelOverlay

Items 1,6,10 to 14 are not shown


V. C

ompa

ct A

C


Air Conditioner Model 301

Features

The 301 is a compact air conditioner that is ideal for small cabs. It can be wall mounted or used as a stand alone floor mount.



Specifications

13-012113-0122

12345678

8A8B8C

8D910111213141516171819

24-158424-158524-158624-158724-158824-194124-194215-050315-050425-001725-002125-007025-0076

25-002221-027626-016227-0602 26-000623-000523-004825-002925-004525-006725-006825-0586

Cooling -15700 Btu/hr (4600 W) Air Flow -200 CFM (340 m3/h) Current -13 Amps/13.5V -6.5 Amps/27VWeight -19 lbs. (8.6 kg)

Casing made of 18GA (1.25mm) Cold Rolled Steel and finished in black semi-gloss epoxy powder coat.

Air Conditioner 12VAir Conditioner 24V

CasingCoverCoil Bracket (R) Coil Bracket (L) Blower SupportMounting Bracket (R) Mounting Bracket (L) Blower 12VBlower 24VBlower HousingBlower WheelMotor 12VMotor 24V

ClipEvaporator CoilExpansion ValveO-Ring #8Bulb ClampLouverAdapterBlower SwitchThermostatKnobKnobWiring Harness


Air Conditioner Model 302

Features

The 302 is a compact unit that can be ducted to deliver air flow where desired. Ideal for dash or compartment mounting.



Specifications

13-0221 Air Conditioner 12V13-0222 Air Conditioner 24V

1 28-0001 Case2 28-0002 Bezel3 23-0011 Louver4 23-0028 Louver Strip5 25-0032 Switch Plate6 21-0003 Evaporator Coil7 25-0677 Motor 12V 25-0678 Motor 24V8 25-0021 Blower Wheel

9 26-0006 Bulb Clamp10 26-0162 Expansion Valve11 27-0602 O-Ring #812 25-0029 Switch13 25-0030 Thermostat14 25-0059 Nut Cover15 25-0067 Knob16 25-0068 Knob17 25-0679 Wiring Harness (Not Shown)

Cooling -17950 Btu/hr (5260 W) Air Flow -250 CFM (425 m3/h) Current -11 Amps/13.5V -5.5 Amps/27VWeight -9 lbs. (4 kg) 3-Speed motor.


Heater-Air Conditioner Model 306

Features

The 306 is ideal for under seat or dash mounting. It’s high performance capacity can handle most cab requirements. It can also be used in limousine applications.



Specifications

13-0651 Heater-AC 12V13-0652 Heater-AC 24V

1 24-0035 Casing2 24-0404 Cover3 24-0497 Blower Plate4 15-1513 Blower 12V 15-1514 Blower 24V4A 25-0048 Blower Housing4B 25-0348 Housing Top4C 25-0053 Motor 12V 25-0076 Motor 24V4D 25-0060 Venturi

4E 25-0200 Blower Wheel4F 25-0271 Motor Mount5 21-0005 Combo Coil6 23-0038 Hose Adapter 2 1/2”7 25-0069 Thermostat8 26-0162 Expansion Valve9 27-0602 O-Ring #810 26-0006 Bulb Clamp11 28-0021 Snap-in Plug12 29-0139 Half Clamp 5/16”

Heating -33000 Btu/hr (9675 W) Cooling -22500 Btu/hr (6685 W) Air Flow -400 CFM (680 m3/h) Current -14 Amps/13.5V -7 Amps/27VWeight -19 lbs. (8.6 kg)

Casing made of 18GA (1.25mm) Cold RolledSteel and finished in black semi-gloss epoxy powder coat.



Features

The 309 is a compact unit that can be ducted to deliver air flow where desired. Ideal for dash or compartment mounting.



Specifications

13-0953 Heater-AC 12V13-0954 Heater-AC 24V

1 28-0016 Case2 28-0006 Bezel3 21-0012 Combo Coil4 25-0070 Motor 12V 25-0076 Motor 24V5 25-0021 Blower Wheel

6 28-0019 Venturi (R) 7 28-0020 Venturi (L) 8 26-0162 Expansion Valve9 27-0602 O-Ring #810 26-0006 Bulb ClampHeating -20200 Btu/hr (5920 W)

Cooling -15100 Btu/hr (4425 W) Air Flow -310 CFM (530 m3/h) Current -11 Amps/13.5V -5.5 Amps/27VWeight -10.5 lbs. (4.8 kg) 3-Speed motor.Casing made of ABS.



Features

The 310 is a compact unit that can be used as a free blowing or ducting unit to direct air around the cab. A remote mount control panel is required for this system.


Part No. Specifications

13-1003 Heater-AC 12V13-1004 Heater-AC 24V13-1023 Air Conditioner 12V13-1024 Air Conditioner 24V13-1090 Plenum Assy. Incl.19A, 19B, 19C

Heating -25500 Btu/hr (7480 W) Cooling -19775 Btu/hr (5800 W) Air Flow -300 CFM (510 m3/h) Current -12 Amps/13V -6 Amps/27VWeight -27.3 lbs. (12.4 kg)

Made of 18GA (1.25mm) Cold RolledSteel and finished in black semi-glossepoxy powder coat.

Pictured with optional cover (item 19) installed.


Dimension Profiles

8B8C8D

9101112

1314

25-002125-002225-022825-029821-036422-031925-006925-060125-060225-066426-0190


No. Part No. Description

12345678

8A

24-212424-212524-212624-216624-216724-216824-221115-055115-055225-0017

CasingMounting Bracket Blower PlateCover PlateGrillFront CoverExpansion Valve Bkt.Blower 12VBlower 24VBlower Housing

No. Part No. Description No. Part No. Description

1516171819

19A19B19C2021

26-026326-039927-060228-003113-1090

24-239623-000523-004828-000428-0009

Blower WheelClipMotor 12VMotor 24VEvaporatorHeater CoilThermostatResistor 12VResistor 24VWiring HarnessBlock Valve

Knurled KnobAir FilterO-RingPVC HosePlenum Assy.Inc. 19A, B, C.PlenumLouverAdapterGrommetGrommet



Features

The 316 is designed for behind the seat installations or for sleeper bunks. It is also designed to duct air around the cab. The blower can be rotated as shown in dimension profiles.



13-160113-160213-1690

Heating -32500 Btu/hr (9525 W) Cooling -26500 Btu/hr (7770 W) Air Flow -350 CFM (595 m3/h) Current -24 Amps/12V -12 Amps/24VWeight -26 lbs. (11.8kg)

The unit is supplied w/o heater valve and de-icing thermostat, which haveto be installed if needed.

Heater-AC 12VHeater-AC 24VPlenum Assy.Inc. 19A -19D


Dimension Profiles

Features

The 316 is designed for behind the seat installations or for sleeper bunks. It is also designed to duct air around the cab. The blower can be rotated as shown in dimension profiles.

Note: 13-1690 Plenum AssyMade of 18GA CRS & Finishedin Black Semi-Gloss EpoxyPowder Coat.

1011

1213

1415

25-009825-013625-055225-053825-067525-067626-019026-0263



123456789

24-242524-242624-242724-243124-243224-250121-039522-033925-0668

CasingCoverCover PlateMotor PlateHose AdapterFilter GrillEvaporator CoilHeater CoilBlower Housing


16171819*19A19B19C19D

26-043027-010527-060213-169023-012523-000624-331724-3316

Blower WheelResistor 12VResistor 24VWiring HarnessMotor 12VMotor 24VBlock ValveKnurled Knob

Air FilterVent TubeO-Ring #8Plenum AssyHose Adapters 2.5”Cover PlateCoversPlenum

Item 19 is optional and has to be ordered seperately.



Features

The 320 is a universal wall mounted unit that can handle the requirements of most off-road cabs. An outside filter kit and damper door can be added for outside air.

Note:

Switch is not as depicted in photo, has been changed to sealed rocker switch.



13-202113-202213-205113-2052

Heating -28000 Btu/hr (8200 W) Cooling -21000 Btu/hr (6150 W) Air Flow- 380 CFM (646 m3/h) Current -18 Amps/13.5V -9 Amps/27VWeight -40 lbs. (18 kg) 3-Speed blower.

Made of 18GA (1.25mm) Cold RolledSteel and finished in black semi-gloss epoxy powder coat.

Heater-AC 12VHeater-AC 24VAir Conditioner 12VAir Conditioner 24V


Dimension Profiles

Features

The 320 is a universal wall mounted unit that can handle the requirements of most off-road cabs. An outside filter kit and damper door can be added for outside air.

9E

9F10

1112131415161718192021

25-066525-065025-027125-012025-013924-083622-020721-021226-002527-022527-005926-019027-060228-011025-004526-0095



123456789

9A9B9C9D

24-118224-118324-118424-118524-118624-123024-124324-118715-150315-150225-004825-034825-006025-0200

CasingTop CoverFront CoverFilter HolderFlapperH.C. Cover PlateE.C. Cover PlateBlower BracketBlower 12VBlower 24VBlower HousingBlower Housing TopVenturiBlower Wheel


22

23242526272829303132333435

25-063125-063225-004425-043523-000523-004824-032026-024226-024328-001428-000426-025824-118824-112825-0436

Motor 12VMotor 24VMotor MountResistor 12VResistor 24VMounting PlateHeater CoilEvaporator CoilHeater ValveHeater Hose 5/8”Gear ClampBlock ValveO-Ring #8OverlayThermostatRotary Control

Switch Push 12VSwitch Push 24VBlower SwitchKnobLouverAdapterCover PlateBowden CableBowden CableGrommetGrommetFilterFlapper HolderControl PlateWiring Harness(Not Shown)



Features

The 321 was designed for ambulance installation. It can be used for any deck mounting application. The high capacity of the 321 makes this unit ideal for ambulance and large cabs.



Specifications

13-2155 Heater-AC 12V 1 24-0539 Casing2 24-0274 Cover3 24-0275 Front4 15-1513 Blower 12V4A 25-0048 Blower Housing4B 25-0348 Housing Top4C 25-0060 Venturi4D 25-0200 Blower Wheel4E 25-0053 Motor 12V 4F 25-0271 Motor Mount5 21-0046 Evaporator Coil

6 22-0130 Heater Coil7 26-0162 Expansion Valve8 26-0006 Bulb Clamp9 25-0029 Switch10 25-0045 Thermostat11 25-0072 Knob12 23-0055 Louver13 27-0602 O-Ring #814 28-0004 Grommet15 28-0021 Snap-in Plug

Heating -40000 Btu/hr (11720 W) Cooling -27300 Btu/hr (8000 W) Air Flow -450 CFM (765 m3/h) Current -17 Amps/12VWeight -31 lbs. (14 kg)

Made of 18GA (1.25mm) Cold Rolled Steel and finished in black semi-gloss epoxy powder coat.



Features

The 325 is a universal unit that fits all ducting requirements.



13-250313-2504

Heating -36000 Btu/hr(10500 W) Cooling -28500 Btu/hr (8350 W) Air Flow -450 CFM (765 m3/h) Current -16 Amps/13.5V -8 Amps/27VWeight -19 lbs. (8.6 kg)

Permanent magnet motor with ball bearings.Casing made of 18GA (1.25mm) ColdRolled Steel and finished in black semi-gloss powder coat.

Heater-AC 12VHeater-AC 24V


Dimension Profiles

Features

The 325 is a universal unit that fits all ducting requirements.

6B6C6D6E

6F78

25-034825-006025-020025-064525-065025-027121-009122-0348



123456

6A

24-002724-002824-001324-001724-003315-150115-150225-0048

CasingCoverCoverCoil Cover (H) Mounting BracketBlower 12VBlower 24VBlower Housing


910

11121314

23-012525-013625-055225-067126-019027-060225-0069

Housing TopVenturiBlower WheelMotor 12VMotor 24VMotor MountEvaporator CoilHeater Coil

Hose Adapter 2.5”Resistor 12VResistor 24VWiring HarnessBlock ValveO-Ring #8Thermostat



Features

Although similar in design and function, the 330 is a larger capacity unit than the 320. It is ideal for street sweepers and large off-road cabs.

Outside air can be achieved by adding a filter kit.

Note:




13-306113-306213-306313-306413-3067

Heating -42200 Btu/hr(12370 W) Cooling -28500 Btu/hr (8350 W) Air Flow -450 CFM (765 m3/h) Current -22 Amps/13.5V -11 Amps/27VWeight -38 lbs. (17.2 kg)

Permanent magnet motor with long life brushes.3-Speed blower.Made of 18GA (1.25mm) Cold Rolled Steel and finished in black semi-gloss epoxy powder coat.Items 31-35 are optional and have to be ordered separately

Heater-AC 12VHeater-AC 24VAir Conditioner 12VAir Conditioner 24VHeater 12V


Dimension Profiles

Electrical ConnectionsOrange - Power (+) Black - Ground (-) White - To Compressor/Pressure SwitchBlue - To Condensor/Relay (if fan condensor)

9F10111213141516171819

202122

24-027124-116022-007821-006326-002527-022527-005926-019027-060225-043525-063125-063226-009526-032025-0044



123456789

9A9B9C9D9E

24-115724-115824-115924-020524-029024-027924-024224-029115-150315-150225-004825-034825-006025-020025-066525-0650

CasingFront CoverTop CoverProtection CoverMounting Bracket (L) Mounting Bracket (R) Coil BracketFresh Air CoverBlower 12VBlower 24VBlower HousingBlower Housing TopVenturiBlower WheelMotor 12VMotor 24V


232425

2627282930*31*32*33*34*35*36

25-004524-083625-012025-013928-001428-011024-112823-000523-004823-008723-011023-012524-201826-042525-0436

Motor MountBlower MountHeater CoilEvaporator CoilHeater ValveHeater Hose 5/8”Gear ClampBlock ValveO-Ring #8KnobSwitch Push 12VSwitch Push 24VRotary ControlBowden CableBlower Switch

ThermostatResistor BracketResistor 12VResistor 24VGrommetOverlayControl PlateLouverAdapterBall LouverHose Adapter 2”Hose Adapter 2.5”GrillAir FilterWiring Harness(Not Shown)



Features

The 344 is a unit that has the condenser mounted in the same compartment as the heater-air conditioner. This unit is mounted on the side of any cab and blows air into a louver console. Outside air is standard.

Note:

Switch is not as depicted in pho-to, has been changed to sealed rocker switch.



13-440113-4402

Heating -34000 Btu/hr (9960 W) Cooling -17000 Btu/hr (4980 W) Air Flow -265 CFM (450 m3/h) Current -33.4 Amps/3.5V -16.7 Amps/27VWeight -77 lbs. (35 kg)

Casing made of 16GA (1.5mm) ColdRolled Steel and finished in black semi-gloss epoxy powder coat.

Heater-AC 12VHeater-AC 24V


Dimension Profiles

/ Pressure Swit ch

1111A11B11C

121314151617181920

21222324

2526

15-751225-057725-057925-062125-062221-031821-031922-029223-000523-004823-014825-004425-004525-025125-021925-022125-034325-043525-063125-063225-101526-0018



12345678910

10A10B10C10D10E

10F10G

10H11

24-222924-223024-191924-223124-192124-192224-192324-192424-201015-156115-156225-004825-034825-006025-020025-065525-066025-027125-060125-060229-013015-7511

Casing Assy.Cover Assy.Sight Glass CoverDrain Pan Assy.Recirc. GrillFilter CoverBottom PlateR/D BracketPlenumBlower 12VBlower 24VBlower HousingBlower TopVenturiBlower WheelMotor 12VMotor 24VMotor MountResistor 12VResistor 24VResistor BracketFan Assy. 12V


27282930313233343536373839404142434445464748

26-004126-019026-026326-034726-035026-037427-003027-009127-050227-060127-060227-060327-110727-110827-112128-000528-004528-021034-016434-016726-002528-0191

Fan Assy. 24VVenturiFanMotor 12VMotor 24VEvaporator CoilCondenser CoilHeater CoilLouverAdapterFinger GuardBlower SwitchThermostatRelay 12VRelay 24VSocket/RelayPressure SwitchKnobSwitch Push 12VSwitch Push 24VWiring HarnessDrier Receiver

Air FilterBlock ValveKnurled KnobBowden CableRotary ControlAir Filter (Recirc.) Drain HoseDrain Hose ClampClampO-Ring #6O-Ring #8O-Ring #10Refr. Hose Assy. #6P-Clamp #8Gear ClampGrommetGrommetReticulated FoamCopper Tube Assy.Copper Tube Assy.Heater ValveOverlay



Features

The 345 is an excellent choice for armored cars and large cabs. Its many options include outside air, rear air damper control, and side air louvers.



13-450313-450413-459013-4595

Heating -46000 Btu/hr(13480 W) Cooling -33000 Btu/hr (9670 W) Air Flow -450 CFM (765 m3/h) Current -22 Amps/13.5V -11 Amps/27VWeight -48 lbs. (22 kg)

Made of 18GA (1.25mm) Cold Rolled Steel and finished in black semi-gloss “texture” epoxy powdercoat.13-4595 Rear Outlet Flapper Kit includes 1 piece 26-0350, 25-0581, 26-0421 and 26-0079 with hardware. Kit is optional and has to be ordered separately

Heater-AC 12VHeater-AC 24VAir Plenum Assy.Rear Outlet Flapper Kit

Note:



Dimension Profiles

Optional

11C11D11E

11F11G

11H121314151617181920

25-006025-020025-022825-029825-027125-060125-060229-013021-036222-031823-000523-004825-004425-011825-030725-058125-0669



1234567891010A10B10C11

11A11B

24-223524-223624-223724-223824-223924-224024-224124-224224-224313-459024-244723-000523-004815-155115-155225-004825-0348

CasingFace CoverFront CoverGrillBlower SupportControl BracketControl BracketProtection CoverFlapper DoorAir Plenum Assy.PlenumLouverAdapterBlower 12VBlower 24VBlower HousingHousing Top


212223242526

272829303132333435

26-002526-007926-019026-035026-040026-0421

26-042226-042327-005927-022527-060226-026328-021228-021324-2274

VenturiBlower WheelMotor 12VMotor 24VMotor MountResistor 12VResistor 24VResistor BracketEvaporator CoilHeater CoilLouverAdapterBlower SwitchThermostat Assy.SwitchKnobWiring Harness(Not Shown)

Heater ValveCable ClampBlock ValveRotary ControlAir FilterBowden Cable(R/A-Option) Bowden Cable (F/A) Bowden Cable (Heat) Gear ClampHeater HoseO-Ring #8Knurled KnobOverlayOverlayMounting Bracket



Features

The 346 is a compact overhead with a heater option. Its compact design makes it an excellent choice for many off-road cabs.

The convenient swing-down unit makes for easy service.

Note:

Switch is not as depicted in pho-to, has been changed to sealed rocker switch.



13-460313-460413-462313-4624

Heating - 17500 Btu/hr (5130 W) Cooling - 17300 Btu/hr (5070 W) -AC only - 14250 Btu/hr (4180 W) - Heater-ACAir Flow - 250 CFM (425 m3/h) Current - 12 Amps/13.5 V - 6 Amps/27VWeight - 33 lbs. (15 kg)

3-Speed motor.Made of 18GA (1.25mm) Cold Rolled Steel finished in black textured epoxy.

* Only for Heat/AC version.** Only for AC version

Heater-AC 12VHeater-AC 24VAir Conditioner 12VAir Conditioner 24V


Dimension Profiles

1011121314

15

16

1718192021

23-004825-002925-011825-043525-063125-063225-0633*25-0634*25-0636**25-0637*26-019026-037527-060228-000428-0005*



1234567

7A7B7C

8

9

24-199124-199224-197924-198024-198124-198215-053315-053425-001725-002125-064325-064421-0315**21-0314*23-0005

Casing Assy.Cover Assy.Coil BracketCoil BracketDrain PanFilter HolderBlower 12VBlower 24VBlower HousingBlower WheelMotor 12VMotor 24VEvaporator CoilCombo Coil (HE) Louver


222324

25

26272829303132

33

28-001228-0013**26-034826-019425-025125-021925-022128-017328-017429-022129-022229-007529-007629-007728-0185

AdapterBlower SwitchThermostatKnobSwitch Push 12V(AC) Switch Push 24V(AC) Switch Push 12V (Heat) Switch Push 24V (Heat) Wiring HarnessWiring HarnessBlock ValveAir FilterO-Ring #8GrommetGrommet

Snap-in PlugSnap-in PlugSolenoid Valve 12VSolenoid Valve 24VRelay 12VRelay 24VSocket RelayOverlayOverlayLatchLatch HookReceptacleStud, Oval SlottedRetainerReticulated Foam



Features

The 347 is a larger capacity version of the 346. The coils can be flipped to either side of the unit to accommodate different installations.

Outside air is available. This high capacity unit will handle most off-road cabs.



13-470313-470413-472313-472413-4795

Heating -40000 Btu/hr (11720 W) Cooling -21000 Btu/hr (6150 W) Air Flow -450 CFM (765 m3/h) Current -23 Amps/13.5V -11.5 Amps/27VWeight -49 lbs. (22.2 kg)

3-Speed motor.Made of 18GA (1.25mm) Cold Rolled Steel and finished in black textured epoxy powder coat.* Only for Heat/AC version.Heater and Evaporator Coil can be changed to have opposite connections.

Heater-AC 12VHeater-AC 24VAir Conditioner 12VAir Conditioner 24VHeater Conv. Kit

Note:



Dimension Profiles

9F9G

9H1011121314151617

181920

25-027125-060125-060229-013021-031322-0290*23-000523-004825-004425-011825-043525-063125-063225-063826-0025*26-0190



123456789

9A9B9C9D9E

24-221524-221624-195624-195724-195824-222824-196024-196115-156115-156225-004825-034825-006025-020025-065525-0660

Casing Assy.Cover Assy.Coil BracketCoil BracketDrain PanCoil Support Assy.Coil SupportFilter HolderBlower 12VBlower 24VBlower HousingHousing TopVenturiBlower WheelMotor 12VMotor 24V


21222324252627282930

31323334

26-0350*26-037626-0377*27-0059*27-0225*27-060228-000428-001228-017228-018728-0189*29-022129-022229-007529-007629-0077

Motor MountResistor 12VResistor 24VResistor BracketEvaporator CoilHeater CoilLouverAdapterBlower SwitchThermostatKnobSwitch Push 12VSwitch Push 24VWiring HarnessHeater ValveBlock Valve

Rotary ControlAir FilterBowden CableGear ClampHeater Hose 5/8”(HD) O-Ring #8GrommetSnap-in PlugOverlayReticulated FoamReticulated FoamLatchLatch HookReceptacleStud, Oval SlottedRetainer



Features

The 353 was designed for log loader applications in Western North America. It is available in many different hose adapter options.

It also has a 32” cover option for cab wall mount applications.



13-530313-5304

Heating -46000 Btu/hr (13480 W) Cooling -34000 Btu/hr (9970 W) Air Flow -450 CFM (765 m3/h) Current -10.2 Amps/27V -20.4 Amps/13.5VWeight -44 lbs. (22 kg)

Made of 18GA (1.25mm) Cold RolledSteel and finished in black epoxy powder coat.Dim. marked (*) are inlet and outlet openings.Items 18 to 28 are optional and have to be or-dered separately.

Heater-AC 12VHeater-AC 24Vt


Dimension Profiles

67891011121314151617

21-033722-029925-006925-066126-002526-019027-005927-009127-022527-042127-060228-0031



12345

5A5B5C5D5E

5F

24-220424-220524-220624-220715-203315-203425-015925-016425-004724-023425-026525-027025-013625-0552

CasingCoverBlower MountProtection CoverBlower 12VBlower 24VBlower HousingVenturiBlower WheelMotor MountMotor 12VMotor 24VResistor 12VResistor 24V


1819202122232425262728

23-016023-016123-016223-016523-016724-143624-221224-152426-041226-026313-539113-5392

Evaporator CoilHeater CoilThermostatWiring HarnessHeater Control ValveBlock ValveGear ClampDrain Hose ClampHeater HoseDrain ValveO-Ring #8PVC Hose

HA Plate (2x4”) HA Plate (4x3”) HA Plate (4x2 1/2”) HA Plate (2x3”/2x2 1/2”) HA Plate (2x4”/2x2”) Cover PlateGrill SupportGrillAir FilterKnurled KnobPlenum 12VPlenum 24V



Features

The 360 was designed to offer a variety of installation options. It can be set up with an outside air or positive fan pressurizer. It is also available with heat. A water and corrosion resistant condenser ensures years of service. Four nylon latches allow easy service access.



13-602313-602413-6095

Heating -46000 Btu/hr (13500 W) Cooling -27000 Btu/hr (7900 W) Air Flow -400 CFM (680 m3/h) Current -40 Amps/12V -20 Amps/24VWeight -77 lbs. (35 kg)

Made of 14 (1.5mm) and 16 (1.5mm) GACold Rolled Steel and finished in grey semi-gloss epoxy powder coat.Items 47 to 49 are optional and have to be ordered separately.

Air Conditioner 12VAir Conditioner 24VHeater Conv. Kit


Dimension Profiles

17181920

2122

22A22B22C

22D2324252627282930313233343536

29-023628-024225-022125-025125-021925-011815-750115-750225-057725-057925-059125-059229-016723-014828-022129-023528-024425-034334-039734-039827-060227-060134-026127-060334-036426-019023-0048



12345678910

10A10B10C10D10E

10F10G

10H111213141516

24-221924-220824-222124-227024-242924-242824-250524-222624-243015-156115-156225-004825-034825-006025-020025-065525-066025-013025-060125-060229-013021-034121-033924-243328-024326-001827-1121

Casing Assy.Cover Assy.Drain PlateCoil SupportR.D. BracketBracketPlateCover PlateAir PlenumBlower 12VBlower 24VBlower HousingHousing TopVenturiBlower WheelMotor 12VMotor 24VMotor MountResistor 12VResistor 24VResistor BracketCondenser CoilEvaporator CoilFilter SupportReticulated FoamReceiver DrierGear Clamp 4”


37383940

4142

43

4445

464747A47B47C47D47E47F47G47J4849

23-000525-004425-043525-063125-063225-069325-068925-068625-068825-068528-022527-003027-009128-024813-609522-030134-026726-007427-022527-005926-034526-044125-043516-020016-030316-0304

Draw Latch Assy.FoamSocket RelayRelay 12VRelay 24VThermostatFan Assy. 12VFan Assy. 24VVenturiFanMotor 12VMotor 24V“C” ClipFinger GuardEPDM SealCable Assy.Air FilterPressure SwitchCopper Tube 3/8”Copper Tube 1/2”O-Ring #8O-Ring #6Copper Tube Assy.O-Ring #10Copper Tube 3/8”Block ValveAdapter

LouverBlower SwitchKnobSwitch Push 12VSwitch Push 24VWiring HarnessFuse 40A/12V (Blower) Fuse 20A/24V (Blower) Fuse 30A/12V (Fan) Fuse 15A/24V (Fan) GasketDrain HoseDrain Hose ClipOverlayHeater Conv. KitHeater CoilCopper Tube Assy.Heater ValveHeater Hose 5/8”Gear ClampRotary ControlBowden CableKnobFilter UnitFilter Kit 12VFilter Kit 24V



Features

The 369 is a low profile roof mount heater-air conditioner.



13-690313-6904

Heating -28000 Btu/hr (8200 W) Cooling -20000 Btu/hr (5860 W) Air Flow -275 CFM (468 m3/h) Current -12 Amps/12V -6 Amps/24VWeight -30.9 lbs. (14 kg)

Casing made of 18GA (1.25mm) ColdRolled Steel and finished in grey epoxy powder coat.

Combo Unit 12VCombo Unit 24V


Dimension Profiles

7b7c7d7e7f7g7h7j7k7k7L8910

23-004825-004425-011825-043528-016128-024828-016628-024425-110625-110526-035027-060234-056028-0230



12345666a6b6c6c6d777a

24-284224-284321-039924-271824-272115-053315-053425-001725-002125-064425-064325-002226-058426-058323-0005

Casing AssemblyCover AssemblyEvaporator CoilValve mtg. brkt (L) Coil Support (Long) Blower 12VBlower 24VBlower HousingBlower WheelMotor 24VMotor 12VClipAir Plenum Assy. 24VAir Plenum Assy. 12VLouver


111213

14151617181920

24-272224-271927-0225

27-005922-037626-002528-022525-073726-019026-0590

AdapterBlower SwitchThermostatKnobEPDM Seal (10mm) OverlayHook TapeAir FilterRocker Switch (G) 24VRocker Switch (G) 12VRotary Control w/nutO-Ring #8Copper Tube Assy.Reticulated Foam

Coil Support BracketValve Mtg. Bracket (R) Heater Hose(2x70mm&180mm) Gear ClampHeater CoilHeater ValveGasketWiring HarnessBlock ValveBowden Cable


V. C

ompa

ct C

onde

nser

s


Electric Condenser Model 402

Features

The 402 is an excellent light duty application condenser. It provides the option of deck or roof mounting.



Specifications

14-020114-0202

1234

4A

4B4C

567

24-159124-159221-027815-751115-751225-0577

25-057925-062125-062228-000528-001423-0148

Capacity

Air FlowCurrent

Weight

Condenser 12VCondenser 24V

Casing CoverCondenser CoilFan Assy. 12VFan Assy. 24VVenturi

FanMotor Assy. 12VMotor Assy. 24VGrommetGrommetFinger Guard

-to support a coolingcapacity of 26500 Btu/hr (7770 W) -1025 CFM (1735 m3/h) -21.2 Amps/13.5V-10.6 Amps/27V-24 lbs. (11 kg)

Electric condensers are used when radiator mounted types cannot be installed. The reasonsbeing insufficient air flow and/or when additional heat load over the engine cannot be tolerated.Condensing capacity will remain constant and will not be dependent on engine RPM.

Casing made of 14/18GA (2/1.25mm) ColdRolled Steel finished in black semi-gloss epoxy powder coat.



Electrical Connections2-way male weather packconnector, packar d#12010973 (MCC #31-1068)with male terminal#12124582-L (2x)(MCC #31-1039) and seal#12010293 (2X)(MCC #31-1024)

Electrical Connections2-way deutsch plug DT06 - 2S(MCC #31-1123) with #W2S wedge(MCC #31-1124) and 2 contact s14/16Ga #0462-209-1614 (MCC#31-1125)

Features

The 403 is a compact high performance condenser.



Specifications

14-030114-0302

12333A3B

3C3D3E

24-251421-041215-760415-760125-057725-0728

25-077825-059129-016629-0197Capacity -To support a cooling

capacity of 29700 Btu/hr (8700 W) Airflow -1150 CFM (1950 m3/h) Current -19.2 Amps (at 13.5V) -9 amps (at 27V) Weight -28.7 lbs (13kg)

Note: Casing made of 16GA satin coatsteel, endplates made of 14GA satin coatsteel and both finished in black semi glossepoxy powder coat.


CasingCondenser CoilFan Assembly 24VFan assembly 12VVenturiFan

Motor 24VMotor 12V#10-32 Hex. Socket“C” Clip

Electrical condensers are used when radiator mounted types cannot be installed. The reasonsbeing insufficient air flow and /or when additional heat load over the engine cannot be tolerated.Condensing capacity will remain constant and will not be dependent on engine RPM.


Electrical Connections :2-way male weather pack connector ,packard #12010973 (MCC #31-1068)with male terminal #12124582-L)(2x)(MCC #31-1039) and seal #12010293(2x) (MCC #31-1024)


Features

The 405 is a compact, high capacity unit. Its compact design allows for wall or flush mounting applications in engine compartments. A motor with longer life than in the 403 is used in this condenser which makes it slightly deeper.



Specifications

14-051314-0514

1233A

3B

3C

3D

3E456

24-289221-041215-755115-755225-057725-0579

25-074525-074629-0166

29-016723-014824-363924-3640

Capacity

Air FlowCurrent

Weight


CasingCondenser CoilFan Assy. 12VFan Assy. 24VVenturiFan

Motor 12VMotor 24V#10 -32 HEX.Socket CTR.Sunk“C” clipFinger GuardBracket, Left (Opt.) Bracket, Right (Opt.)

-to support a cooling capacityof 29650 Btu/hr (8700 W) -1150 CFM (1950 m3/h) -17 Amps (1.35V) -8.5 Amps at (27V) -28.5 lbs. (13 kg)

Electric condensers are used when radiator mounted types cannot be installed. The reasons being insufficient air flow and /or when additional heat load over the engine cannot be tolerated.Condensing capacity will remain constant and will not be dependent on engine RPM.

Casing made of 16GA (1.5mm) Satin Coat Steel.Endplates made of 14GA (2mm) Satin Coat Steel. Both are finished in black semi-gloss epoxy powder coat.

Items 5 and 6 have to be ordered separately.



Features

The 406 is a deck or roof mount condenser that has the receiver/drier mounted internally. The hose can exit either side of the 406. Condenser must be mounted as shown in picture.



Specifications

14-061114-0612

123456789

10

11

1213141516171819

24-014524-015924-199324-199825-030925-043424-034324-023421-012225-047025-0490

25-025125-021925-022126-022025-034327-028828-000528-001327-060125-0451

Capacity -to support a cooling capacity of 23600 Btu/hr (6925 W) Air Flow -950 CFM (560 m3/h) Current -14 Amps/13.5V -7 Amps /27VWeight -30 lbs. (13.6 kg)

Casing made of 16GA (1.5mm) and mount-ing brackets of 14GA (2mm) Cold Rolled Steel finished in black semi-gloss epoxy powder coat.


CasingCoverMounting Bracket (L) Mounting Bracket (R) Venturi Assy. Motor SupportReceiver Drier BracketMountCondenser CoilMotor 12VMotor 24V

Relay 12VRelay 24VSocket, RelayReceiver DrierPressure SwitchRefr. Hose Assy. #6GrommetSnap-in PlugO-Ring #6Wiring Harness

Electric condensers are used when radiator mounted types cannot be installed. The reasonsbeing insufficient air flow and /or when additional heat load over the engine cannot be tolerated.Condensing capacity will remain constant and will not be dependent on engine RPM.



Features

The 407 is a larger capacity version of the 406. With the receiver/drier mounted internally, installation time is minimized. Condenser must be mounted as shown in picture.



Specifications

14-070114-0702

123456789

10

1112

1314151617181920

24-119924-120024-198425-038825-043424-034324-023421-020325-047025-049025-0181

25-010825-025125-021925-022126-022025-034327-028828-000528-001327-060125-0451

Capacity -to support a cooling capacity of 29000 Btu/hr (8500 W) Air Flow -1100 CFM (1870 m3/h) Current -14 Amps/13.5V -7 Amps /27VWeight -33 lbs. (15 kg)

Casing made of 16GA (1.5mm) and mounting brackets of 14GA (2mm) Cold Rolled Steel finished in black semi-gloss epoxy powder coat.


CasingCoverMounting Bracket VenturiMotor SupportReceiver Drier BracketMountCondenser CoilMotor 12VMotor 24VFan

FanRelay 12VRelay 24VSocket, RelayReceiver DrierPressure SwitchRefr. Hose Assy. #6GrommetSnap-in PlugO-Ring #6Wiring Harness

Electric condensers are used when radiator mounted types cannot be installed. The reasonsbeing insufficient air flow and /or when additional heat load over the engine cannot be tolerated.Condensing capacity will remain constant and will not be dependent on engine RPM.



Features

The 408 was designed for large capacity requirements in the forestry, construction and mining industries. Its three fan design ensures high capacity performance in the most demanding conditions. Receiver/drier mounted internally. Condenser must be mounted as shown in picture.



Specifications

14-085114-0852

1234567

8910

11121314151617181920

24-096424-096524-096624-096721-016625-018525-019025-010824-023425-043425-0309

26-021925-029725-030827-037327-060128-000528-000425-045028-001328-0011

Capacity

Air FlowCurrent

Weight


CasingCoverSide CoverReceiver Drier BracketCondenser CoilMotor 12VMotor 24VFan C.C.W.Motor MountMotor SupportVenturi Assy.

Receiver DrierMountPressure SwitchRefrigerant Hose #6O-Ring #6GrommetGrommetWiring HarnessSnap-in PlugSnap-in Plug

Electric condensers are used when radiator mounted types cannot be installed. The reasons being insufficient air flow and /or when additional heat load over the engine cannot be tolerated. Condensing capacity will remain constant and will not be dependent on engine RPM.

-to support a coolingcapacity of 29000 Btu/hr(8500 W) -1050 CFM (1785 m3/h) -20 Amps/13.5V-10 Amps/27V-47 lbs. (21.3 kg)

Casing made of 16GA (1.5mm) and mount-ing bracket of 14GA (2mm) Cold Rolled Steel finished in black semi-gloss epoxy powder coat.



Features

The 409 is a universal mount electric condenser. It does not have the receiver/drier mounted internally. This allows for many different installation options. Condenser can be mounted vertically or horizontally.



Specifications

14-090114-0902

123456

789

1011

24-196724-196624-196821-030925-038825-0434

24-023425-018125-047025-049025-063528-0045

Capacity -to support a cooling capacity of 28500 Btu/hr (8350 W) Air Flow -1100 CFM (1870 m3/h) Current -14 Amps/13.5V -7 Amps/27VWeight -46 lbs. (21 kg)


CasingGrillCoverCondenser CoilVenturiMotor Support

Motor MountFanMotor 12VMotor 24VWiring HarnessGrommet

Electric condensers are used when radiator mounted types cannot be installed. The reasonsbeing insufficient air flow and/or when additional heat overload the engine cannot be tolerated.Condensing capacity will remain constant and will not be dependent on engine RPM.

Casing made of 16GA (1.5mm) Cold RolledSteel finished in black semi-gloss epoxypowder coat.



Features

The 410 was designed for high capacity off-road applications. Its large design has flexible hose routing options. The receiver/drier is mounted internally. Condenser must be mounted as shown in picture.



Specifications

14-100114-1002

1234567

89101112

1314

151617181920212223

24-092524-092624-092724-092824-092921-018825-047025-022925-030224-096324-023424-096226-0219

25-030825-025125-021925-022127-037927-060128-005725-039428-004528-000528-001327-0012

Capacity -to support a cooling ca-pacity of 41600 Btu/hr(12200 W) Air Flow -1900 CFM (3230 m3/h) Current -24 Amps/13.5V -12 Amps/27VWeight -65 lbs. (29.5 kg)


CasingCoverFan Mounting PlateCover PlateReceiver Drier BracketCondenser CoilMotor 12V (B.B.) Motor 24V (B.B.) FanMotor BracketMotor MountMotor SupportReceiver Drier

Pressure SwitchRelay 12VRelay 24VSocketRefrigerant Hose #6O-Ring #6Vibration MountWiring HarnessGrommetGrommetPlastic PlugHose Clamp #6

Electric condensers are used when radiator mounted types cannot be installed. The reasons being insufficient air flow and /or when additional heat load over the engine cannot be tolerated. Condensing capacity will remain constant and will not be dependent on engine RPM.

Casing made of 16GA (1.5mm) Cold Rolled Steel and finished in black semi-gloss epoxy powder coat.


GND - BLACK

CGND - WHITE PWM / LI - BLUE

UN - REDD C B A

PED WP 4-WAY SHROUD CONNECTORDELPHI PACKARD #12010974


=

K

1

24.0

262.

4

1

1

514.8

476.0

M8 x 1.25 ( x 2 )16

2.1

157.

6 50.0

66.2

213.

8

1AIR FLOW

Part no. No. Part No. Description No. Part No. Description

14-4302 Condenser 24V 12345678910

21-185524-1202224-1204024-1204124-1204224-1204324-1204425-308926-001826-1916

CONDENSERReceiver BracketCondenser CasingCondenser Supp. BackCondenser SupporterReceiver SupportCondenser CoverFan EBM 24VReceiver DrierMCC Label for 14-4302

11121314151617181920212223242526

27-008227-060127-121128-034528-034829-031529-050029-051429-052029-062629-055529-075329-125231-116434-481029-1455

P-Clamp #08O-Ring #6Gear Clamp 3"Plastic Cap #6Plastic Cap #8Pop Rivet 3/16"x.44"Washer M6 SSWasher M5 SSBolt M6x20 SSBolt M5x12 SSWasher M6 S.S.Bolt M6x12 SSLock Washer M6Conduit 3/8" L=300mmCopper Tube 3/8"M8 LOCKNUT w/NYLON IN

SpecificationsHeatingAir flowCurrentWeight

23.000 Btu/hr1000 CFM2.0 AMPS10.7KG(13.8KG with mountingbrackets and mtg. fastners)



Condensors Radiator Mount MCC’s heavy duty radiator mounted condensers are the least expensive alternative compared to forced air types. They are manufactured using 0.008-0.010” (0.20mm-0.25mm) thick aluminum fins and copper tubes, with endplates made of 16GA (1.5mm) satin coat steel. Waved or corrugated fins are available, as indicated on the drawings. In addition to the heavy fin thickness, the edges are rippled, increasing the strength further. Low fin density makes cleaning easier and provides less pressure drop. Please keep in mind that the MCC condensers are developed for off-road environments. Condensers are painted black. In and outlet tubes are reinforced with metal brackets where required. All coils are pressure tested to a minimum of 300 psi (2.1 MPa) .

21-0089 Condenser

21-0176 Condenser

21-0320 Condenser

Note: Capacity based on 100°F (38°C) air temp. and 140°F (60°C) condensing temp. Inlet -3/4-16 UNF Male (O-Ring #8) Outlet -5/8-18 UNF Male (O-Ring #6)


Condensors Radiator Mount21-0020 Condenser

21-0322 Condenser

21-0324 Condenser

Note: Capacity based on 100°F (38°C) air temp. and 140°F (60°C) condensing temp. Inlet -3/4-16 UNF Male (O-Ring #8) Outlet -5/8-18 UNF Male (O-Ring #6)


VI. L

ouve

rs


Round Louvers

Louvers shown have diameters of 3.94” (100 mm) and are manufactured of super tough nylon. The ST801 was specially designed for extreme low temperatures. The louvers must be used with any of the adapters below.

23-0045Nylon strap up to 3” diameter

58-62077-003” Round Louver with Louver Ring

23-0171Rotates and closes,adapter include

23-0100Rotates and closes comes with 4” hoseadapter (ABS) . Four screw holes at Ø 4.93”(125.2mm) Used in the RV and motor home industry.

23-0172Rotates and closes, hoseadapter 2” included

23-0065Non adjustable, mounts in 3”(76.2mm) hole.Mounting spring included.Low cost (ABS) .

Above louvers are manufactured of prime grade ABS. The overall Ø 2.75” (70 mm), screw hole Ø 2.204” (56 mm) (4x), mounting hole Ø 2.10” (53.5mm). Adapter will also accept snap in installation without screws.

Y23-00002-00Louver, 2.5 in fixed vane

58-62077-00Louver, air diffuser, round, gen5

23-0005Round Louver


Ball Type Louvers (ABS)

23-0164Black ball, hose adapter 2” included

23-0067Black ball, hose adapter 2.5” included

23-0057Chrome ball, hose adapter2.5” included

Louvers23-0164, 23-0057, 23-0067, and 23-0087 Mount in a Ø2.5” (63.5 mm) hole.

23-0087Black ball, adapter included

23-0097Large black ball, adapter includedmounts in a Ø 3” (76.2mm) hole.

23-0098Large black ball, hose adapter Ø 2.5” includedLouvers 23-0097 and 23-0098 mounts in a Ø 3”(76.2mm) hole.


23-00423.65” (92.2mm) x 1.88” (47.8mm) , (ABS)

snaps into hole 3.41” (86.6mm) x 1.72” (43.7mm)

23-00296” (152.4mm) x 1.87” (47.6mm) , (ABS)

snaps into hole 5.73” (145.5mm) x 1.72” (43.7mm)

23-00466” (152.4mm) x 1.562” (39.7mm), (ABS)

snaps into hole5.75” (146mm) x 1.375” (34.9mm)

23-00557.1” (180.3mm) x 3.3” (83.8mm) , (ABS)

snaps into hole 6.38” (162.1mm) x 2.48” (63mm)

23-0054Adapter for 23-0053 with 2.5” (63.5mm)

hose adapter. (ABS)

23-00272.45” (62.2mm) x 2.44” (62mm) , (ABS) 2” hose adapter included, snaps into hole

2.2” (55.9mm) x 2.375” (60.3mm)

23-00535.43” (137.9mm) x 2.68” (68.1mm) ,

(ABS) fits hole 4.75” (120.7mm) x 2” (50.8mm)

23-01165.43” (138mm) x 2.17” (55mm) , (ABS)

snaps into hole 5.12” (130mm) x 1.81” (46mm)

Rectangular and Square Louvers (closable and adjustable)

58-62042-00LOUVER, RECTANGULAR, GEN. 5


Rectangular and Square Louvers (closeable & adjustable)

DIMENSIONS

ABOVE LOUVERS SNAP INTO 1/16” (1.59mm) TO 1/8” (3.19mm) WALL THICKNESS OPENINGS

Part No.Overall Size Mounting Hole

Snap-inHose*

Adapterin. mm in. mm

23-0173 2.62 x 3.45 66.5 x 87.6 2.02 x 2.85 51.3 x 72.4 yes no

23-0174 3.82 x 5.64 97.0 x 143.3 2.82 x 5.13 71.6 x 130.3 yes no

23-0175 3.82 x 7.87 97.0 x 199.9 2.85 x 7.34 72.4 x 186.5 yes no

23-0176 3.82 x 10.11 97.0 x 256.8 2.82 x 9.61 71.6 x 244.1 yes no

*Louvers available on request with Ø2.5” (63.5 mm) hose adapter as a one piece design.

DIMENSIONS

ABOVE LOUVERS SNAP INTO 1/16” (1.59mm) TO 1/8” (3.19mm) WALL THICKNESS OPENINGS

Part No.Overall Size

Mounting Hole Snap-inHose*

Adapterin. mm

23-0177 2.17x 6.08 55.1 x 154.4 request sample yes No

23-0178 2.17 x 6.08 55.1 x 154.4 request sample yes No

23-0173 23-0175

23-0176

23-017823-0177

23-0174


Hose Adapter ø 2" (50.8 mm)

23-0203 Hose Adapter ø 2.5" (63.5 mm)

Rectangular and Square Louvers (closable and adjustable)

Hose Adapters

23-0186 23-0145Louver Vents

23-0186 23-0145

23-0203


Filter Kit 605 - Pressurizer

Airflow



43K3J3H3G3F3E3D1

29-023029-074629-074529-074429-074328-062328-062228-062125-0013

HEX NUT (10-32)BASE INSERT (M6)¼ - 20X5” SLOT SCREW¼ - 20X1.25” HEX HEAD BOLTHEX LOCK NUT (1/4-20)BASESPACERSOUTLETFAN


3C3B3A32

28-062028-061928-088128-064925-0894

MOTOR MOUNT LOUVER MOUNT Ø3” INLET BODY ASSY. (Ø3” INLET MOTOR 24V


Flex Hose23-01022” Low friction, non collapsible,sold in length of 47” (1200 mm) 23-01042.5” Low friction, non collapsible,sold in length of 47” (1200 mm)

23-001523-002023-002523-003523-0040

2” Collapsible sold in multiples of 50 feet2.5” “ “3” “ “3.5” “ “4” “ “

Adapters

23-0048Adapter, Nylon 66

23-0006Cover plate (ABS)

Mounting hole Ø 3.1” (79mm) . Screw hole 4 x Ø 84 mm.

23-0017Hose adapter, 2”

23-0018Hose adapter, 2.5”

23-0032Hose adapter, 3”,

Nylon 66

23-0143Hose adapter, 60mm, Nylon 66

www.mcc-hvac.com • Member of MCC Group • Certified ISO 9001 and ISO 14001. Specifications subject to change without notice.

MCC is a registered trademark.

MCC Mobile Climate Control

MCC - Mobile Climate Control

Documents

Transcript of MCC - Mobile Climate Control