Looking to sell into Dealers and make specific shops? - SPC ...

Specialty Products CompanyWheel Alignment Parts and Tools

Looking to sell into Dealers and make specific shops?

For more info 800-525-6505 - www.specprod.com

Sometimes selling aftermarket parts into a dealership or make specific shop can be difficult. Large catalogs mean lots of parts that they don’t need and aren’t interested in. Specialty Products has a group of flyers that you can download if you have customers that are dealers or make specific, or if your sales force is looking to make calls into these markets. Click on the flyers below, they are an easy ‘quick reference’ for alignment parts and tools for specific makes. Print them out, make the calls into dealers and shops, get the order!

©20

190

Niw

ot C

orp.

dba

Spe

cial

ty P

rodu

cts

Co.®

AcuraAudi BMWChevy/GM Passenger CarChevy/GMC Truck & SUVDodge/RAM Truck & SUVFord MustangFord Truck & SUVHondaHyundai

JeepKiaMercedesNissan/Infiniti PassengerCarNissan/Infiniti Truck & SUVPorscheToyota/Lexus Passenger CarToyota Truck & SUVVolvoVolkswagen

Click and print today. Increase sales into these specific markets.

Need the most recent applications? Want to find out about SPC’s newest parts? Go online for our latest solutions!

1-800-525-6505www.specprod.com

©2019 Niwot Corp. dba Specialty Products Co.®

Acura:1997 - 00 EL1990 - 01 Integra

67090 Acura: 67095 Acura:2001 - 04 CL 2004 - 08 TL 1996 - 04 RL 67290 Acura: 1999 - 03 TL 2001 - 06 MDX; 2004 - 08 TSX 2004 - 08 TL (inc. Type S)

Acura Rear EZ Arm™Part No. 67030Rear Adjustment Range: Camber -2.0° to +5.0° Installation time: .5 hr/side Required: 1 per Wheel

Acura Rear EZ Arm™Part Nos. 67090, 67095 & 67290 Rear Adjustment Range: Camber -2.0° to +4.0° Installation time: .5 hr/side Req.: 1 per Wheel

Adjustable Ball JointsPart Nos. 67125, 67135, 67145,67155, 67165, 67220Front Adjustment Range: Standard: Camber ±1.5° Extended: Camber +1.5° to +3.0°Installation time: .6 hr/side Required: 1 per wheel

67125 Standard Acura: 2001 - 04 CL; 1997 - 99 CL (w/35.3mm Ball Joint) 67320 Extended 1999 - 08 TL; 1996 - 98 TL 2.5; 2004 - 08 TSX 67135 Standard Acura: 1996 - 00 EL; 1990 - 01 Integra; 1991 - 96 Legend 67330 Extended 1996 - 04 RL; 2009 - 14 TL; 1996 - 98 TL 3.2 2009 - 14 TSX 67145 Standard Acura: 1997 - 99 CL (w/33.5mm Ball Joint Dia.) 67340 Extended67165 Standard Acura: 1992 - 94 Vigor 67360 Extended

Acura:2014 & Up MDX

Acura Rear Adjustable Ball JointPart No. 23450Rear Adjustment Range: Camber -±3.0° Installation time: .6 hr/side Required: 1 per Wheel

Acura:2001 -05 EL2002 - 06 RSX

Acura Rear EZ Arm™Part No. 67230Rear Adjustment Range: Camber -4.0° to +6.0° Installation time: .5 hr/side Required: 1 per Wheel

See the web for in-depth information on this kit and how it will work in the Honda/Acura

multi-link suspension.

67295

67295

67292

6729167293

67290

Acura 5 Arm SetPart No. 67289Rear Adjustment Range: 67289 (5 ARM SET) Camber: ±3.0° (Install time: .7 hr/side) Toe: ±3.0° Setback: ±1.0” 67290 (Install time: .5 hr/side) Camber: -2.0° to +4.0° 67291 (Install time: .5 hr/side) Camber: ±3.0° 67292 (Install time: .5 hr/side) Setback: 1” to +1” 67293 (Install time: .5 hr/side) Setback: 1” to +1” 67295 (Install time: .5 hr/side) Toe: ±3.0° Required: 1 per wheel

67289, 67290, 67291, 67292, 67293, 67295Acura: 2004 - 08 TL (inc. Type S) 2004 - 08 TSX 67290 ONLY Acura: 2001 - 06 MDX

6729167293

67292

67290




MDX & ZDX Rear Camber ArmsPart No. 67570 Rear Adjustment Range: Camber -2.0° to +4.0° Installation time: .5 hr/side Required: 1 per Wheel

Acura: 2009 - 14 TL, TSX

Acura: 2007 - 13 MDX2010 - 13 ZDX

TSX/ TL Rear Adjustable 3 Arm SetPart No. 67540 (Inc. 67545, 67550, 67555) Rear Adjustment Range: 67540 Camber: ±3.0°/Toe: ±1.0°/Setback: ±1.0° (3 ARM SET) Install Time: .8 hr/side 67545 Camber: ±1.0° Install Time: .3 hr/side67550* Setback: ±1.0” Install Time: .3 hr/side67555* Toe: ±1.0° Install Time: .3 hr/sideRequired: 1 per wheel *Must be used with 67545

67545

67555

67550

67545 Camber

67555 Toe

Acura: 81260 2006 - 11 CSX 2001 - 02 EL 2002 - 02 RSX (VIN2C003183 & Earlier)

81280 2003 - 05 ELI 2013 - 18 ILX 2001 - 06 MDX 2007 - 18 RDX 2002 - 06 RSX (VIN2C003184 & Later)

EZ Cams™

Part Nos. 81260, 81280, 81295 Front Adustment Range: Camber ±1.75° Installation time: .5 hr/side Reqired: 1 per axle

SPC has been involved with Acura’s racing since 2008. iMoto Racing has used a variety of SPC parts in their various SCCA class vehicles. Discover the difference race tested parts make!

81295 2007 - 13 MDX, 2010 - 13 ZDX

Acura Camber BracketPart No. 67465Rear Adjustment Range: Camber ±1.25° Install time: .75 hr/side Req.: 1 per Wheel

Acura Rear Camber ArmPart No. 67466Rear Adjustment Range: Camber ±3.0° Install time: .5 hr/side Req.: 1 per Wheel

Acura Hi Performance ArmPart No. 67475Rear Adjustment Range: Camber ±3.0° Install time: .5 hr/side Req.: 1 per Wheel

Acura: 2006 - 11 CSX2013 & Up ILX

67465

67466

67475

Good67465

Better67466

Best67475

REAR Camber Change Install Time Construction Bushing Weight

Stamped Replace

±1.25° .75 hr/side Steel OE > OE Inner

Forged OE ±3.0° .5 hr/side Steel Style = OE

Forged xAxis™

±3.0° .5 hr/side Aluminum Outer < OE

Honda 2006 & Up Civic, (Incl. Si, Hybrid)Acura 2006 - 11 CSX; 2013 & Up ILX

67550 Setback

US Patent Nos. 8,544,861 • 8,469,375 • D783,393China Patent No. 01630012294.XOther Patents Pending


1-800-525-6505www.specprod.com ©

2020

Niw

ot C

orp.

dba

Spe

cial

ty P

rodu

cts

Co.®

Front Adjustment range: Camber ±1.50° Caster ±1.50°Required: 81353, 81363, 81373 81358, 81368, 81378 1 per axle 81352, 81362, 81372 1 per wheel - right 81351, 81361, 81371 1 per wheel - left81351, 81352, 81353 & 81358* APPLICATIONSAudi: 1998 - 08 A4/S4/RS4 2007 - 08 A5/S5 1998 - 04 A6/RS6/S6/Allroad81361, 81362, 81363 & 81368* APPLICATIONSAudi: 2009 - 16 A4/RS4/S4 2012 & Up A6/RS6/S6/ Allroad 2009 - 16 A5/S5/RS5 2012 & Up A7/S7/RS7 2009 - 17 Q5 2013 - 17 SQ581371, 81372, 81373 & 81378* APPLICATIONSAudi: 2005 - 11 A6/S6 2004 - 10 A8/S881381, 81382, 81383 & 81388* APPLICATIONSAudi: 2017 & up A4/S4 2018 & up A5/S5

AUDI AND VW FRONT UPPER MULTI LINK ARM SET

This set of adjustable upper control arms will allow ±1.5˚ camber and/or caster change on a wide range of Audi and VW models. These arms directly replace factory fixed-length arms, allowing easy

adjustments after installation. Engineered for both street and track use, maintenance free

ball joints and bushings provide factory ride, handling, and NVH performance.

AUDI AND VW PERFORMANCE ARMS Get ready for the track with this four (4) arm set of

adjustable upper links for many Audi and VW models. This kit has four arms so you can change

camber and caster ±1.5° on both sides. xAxis sealed flex joints replace the overly compliant inner bushings with a free pivoting minimum compliance joint. You will feel the difference in handling.

SPC’s Performance Audi Arms Feature xAxis™ Sealed joint retains grease and excludes contaminants Highly polished electroless-nickel finish on ball maximizes durability Up to 45° angularity for high mis-alignment requirements

SPC Arms Feature: Forged 6061-T6 Aluminum construction for

maximized strength at a minimum weight Hooked link to maximize clearances OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts

SPC Performance Arms Add: xAxis™ sealed flex joints replacing overly

compliant OE inner bushings with a free pivoting, minimum compliance, joint

NOTE: 81358, 81368, 81378 and 81388 are performance parts; if OE type noise isolation levels are desired use our 81353, 81363, 81373 or 81383 arm sets

*Warning: You will also hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH). SPC’s performance set of arms will transmit road noise into the cabin.

81358 AXLE 81368 AXLE

81378 AXLE 81388 AXLE

81353 AXLE81351 81352LEFT SIDE RIGHT SIDE




Audi: 2009-16 A4/S4, A5/S5 2012 & Up A6, A7 2011 & Up A8

Audi Rear Camber ArmPart No. 81335 Rear Adj. Range: Camber ±3.0°Required: 1 per wheelAudi: 2006 & Up A3/S3; 2017 & Up RS3 2008-13 TT

Audi Front Camber/Caster KitPart No. 81340 Front Adj. Range: Camber ±1.0°/Caster ±1.0° Req.: 1 per wheelAudi: 2000-06 TT FWD/AWD

Audi Rear Camber Adjusting Tool Part No. 87570 This tool makes adjusting the OE camber cams on the rear of Audis a snap.

Audi A4 Rear Toe KitPart No. 81520 Rear Adj. Range: Toe ±1.5° • Required: 1 per wheelAudi: 2002 - 08 A4/Quattro; 2002 - 08 S4/Quattro 2003 - 09 A4 Cabrio/Quattro 2003 - 09 S4 Cabrio/Quattro; 2006 - 08 RS4T

Note: Pinch Bolts Available Separately Part Nos. 21040 & 21045

BMW Rear Camber Arm - PerformancePart No. 72110 • Rear Adj. Range: Camber -1.0° to +3.0° Required: 1 per axle

BMW Front Adjustable Upper Strut MountsPart Nos. 72065, 72070, 72080, 72110, 72180, 72190Front Adjustment Range: Camber -1.0° to +3.0° Caster ±.50° Required: 1 per axle

BMW 5/6 Series Adjustable Rear BushingsPart No. 72185Rear Adjustment Range: Camber ±1.25°, Toe ±1.25°Required: 1 per wheel

BMW RWD: 1996 - 04 5 Series 528 w/EDC, 540i, 540iT, M5 (E39) 1996 - 03 5 Series 525i, 528 w/o EDC, 528iTi, 530i (E39) 2004 - 10 6 Series including M6 (E63)

BMW: 2000 - 06 3 Series Coupe and Convertible (E46) 1999 - 05 3 Series Sedan and Wagon (E46) 1992 - 99 3 Series 318, 323 and M3 (E36) 2003 - 08 3 Series Z4 (E85)

72065 Applications: BMW AWD: 1984 - 91 3 Series (E30)72070 Applications: BMW AWD: 2008 - 13 1 Series (E81, E82, E87, E88) 2007 - 13 3 Series (E92, E93) 2006 - 12 3 Series Sedan/Wagon (E90, E91)BMW RWD: 1992 - 99 3 Series 318, 325, 328, M3 (E36) 1996 - 02 Z3 Coupe/Roadster including ‘M’ (E36)72080 Applications: BMW 2000 - 04 3 Series Coupe/Convertible (E46) RWD/AWD: 1993 - 03 3 Series Sedan/Wagon (E46) BMW RWD: 1996 - 03 5 Series 525i, 528i w/o EDC, 528iT, 530i (E39)

72090 Applications: BMW 2004 - 05 3 Series Sedan/Wagon (E46) RWD/AWD: 2005 - 06 3 Series Coupe/Convertible (E46) BMW RWD: 2003 - 08 3 Series Z4 Except M (E85) 1992 - 99 3 Series 318Ti (E30)72180 Applications: BMW RWD: 1996 - 04 5 Series 528I w/EDC, 540i, 540iT, M5 (E39) 72190 Applications: BMW RWD: 2008 - 13 1 Series (E81, E82, E87, E88) 2007 - 13 3 Series Coupe/Convertible (E92, E93) 2006 - 12 3 Series Sedan/Wagon (E90, E91)



BMW Front Strut ToolPart No. 72095This tool was designed for turning the valves on adjustable damping struts when our SPC Adjustable Strut Mounts (above) are used on BMWs.

BMW: SPC Kits #72065, #72070, #72080, #72090, #72180, #72190

BMW: 2008 - 13 1 Series incl 1M Coupe 2007 - 13 3 Series (Coupe & Convertible) 2006 - 12 3 Series (Sedan & Wagon) 2007 - 13 M3

1 & 3 Series BMW Rear Camber ArmPart No. 67105 • Rear Adjustment Range: Camber ±3.0°Required: 1 per wheel

BMW Rear Camber ArmPart Nos. 72115, 72116, 72117, 12116, 12117Rear Adjustment Range: Camber -1.0° to +3.0°Required: See right

BMW: 2007 & Up X5; 2008 & Up X6 72115 - Pair 72116 - Right 72117 - Left 12116 - Right/Non Adjustable 12117 - Left/Non Adjustable

©20

20 N

iwot

Cor

p. d

ba S

peci

alty

Pro

duct

s Co

.®

72065, 7207072080, 7209072190

72180

BMW: 2016 & Up X1 (F48) 2018 X2 (F38)F48 & F38 BMW Rear Camber Arm

Part No. 67108 • Rear Adjustment Range: Camber ±3.0°Required: 1 per wheel

BMW Rear Toe Adjusting ToolsPart Nos. 87565, 87567Quickly and easily adjust rear toe by using your 1/2” drive socket to drive change on the rear toe adjusting brackets.

87565 Applications: BMW 3 Series (E46) and Z4 models Equivalent to BMW tool #83300493306 87567 Applications: BMW 3 Series (E36) Equivalent to BMW tool #88-910887565

87567




GM Rear Toe and Camber ShimsSeries Nos. 71300, 71500Rear Adjustment Range: Camber ±1.0° Toe ±1.0° Installation time: .5 hr/side Required: 1 or 2 per wheel

GM HiPer Strut Front Cam Bolt SetPart No. 82130Front Adj. Range: Camber ±2.0°Installation time: .3 hr/side Required: 1 per wheel

Going Classic? Check out our Adjustable Upper Control Arms for A, F, G Bodies, Tri-5s and 3rd-5th Gen Full SizeSPC Performance offers fully adjustable, rugged upper control arms to adjust your front end and meet your exact needs. These arms provide quick and easy adjustment for standard or lowered heights. Fine tune your handling and alignment while minimizing tire wear.

Buick: 2010 Allure; 2016 & Up Cascade 2016 & Up Envision; 2010 & Up LaCrosse 2011 - 17 Regal Cadillac: 2014 - 16 ELR; 2013 & Up XTS

81250: Buick, Chevrolet, Cadillac, Olds, Pontiac, Saturn81260: Buick, Chevrolet, Olds, Pontiac, Saturn81280: Buick, Chevrolet, Cadillac, Olds, Pontiac, SaturnGo online to www.specprod.com or check our Sourcebook™ for models and years.

75200: Chevrolet, Pontiac75400: Buick, Chevrolet, Cadillac, Olds, Pontiac, Saturn81280: Buick, Chevrolet, Cadillac, Olds, PontiacGo online to www.specprod.com or check our Sourcebook™ for models and years.

71300: Buick: 2012 & Up Verano Cadillac: 2013 & Up ELR Chevrolet: 2011 & Up Cruze 2001 & Up Volt71500: Buick: 2013 & Up Encore Chevrolet: 2012 & Up Sonic

GM Rear Camber and Toe BoltsPart Nos. 82080, 82085 and 8209082080 Rear Adjustment Range: Camber ±2.0°Installation Time: .5 hr/side Required: 1 per wheel82085 Rear Adjustment Range: Toe ±2.0° Installation Time: .5 hr/side Required: 1 per wheel82090 Rear Adjustment Range: Camber ±2.0° / Toe ±2.0° Installation Time: .3 hr/axle Required: 1 per wheel

82080 & 82085 Without HiPer Strut Suspentions Buick: 2010 Allure 2010 & Up LaCrosse 2011 & Up Regal82090 With HiPer Strut Suspentions Buick: 2010 Allure 2010 & Up LaCrosse 2011 & Up Regal Cadillac: 2013 & Up XTS

EZ Cams™

Part Nos. 81250, 81260, 81280 Front/Rear Adj. Range: Camber ±1.75° Installation time: .5 hr/side Required: 1 per axle

EZ Shims™

Part Nos. 75200, 75400, 75600 Rear Adj. Range: Camber ±1.50°/Toe ±1.50° Installation time: .5 hr/side Req.: 1 per wheel

71030 SERIESCamber Change Toe Change

71031 ±.10° 71041 +.25° 71032 ±.20° 71042 +.50° 71033 ±.30° 71045 -.25° 71034 ±.40° 71046 -.50° 71035 ±.50°

71050 SERIESCamber Change Toe Change

71051 ±.10° 71061 +.25° 71052 ±.20° 71062 +.50° 71053 ±.30° 71065 -.25° 71054 ±.40° 71066 -.50° 71055 ±.50°

71030SHIM SET Includes 18 shims/2 each of 71031-71035and 71041-46

71050SHIM SET Includes 18 shims/2 each of 71051-71055and 71061-66

82080 & 82085

82090

GM Rear Camber/Toe Kit (Pr)Part No. 82100Rear Adj. Range: Camber ±2.0° / Toe ±2.0°Installation time: .3 hr/side Required: Camber and Toe - 1 per wheel Camber or Toe 1 per axle

Chevrolet: 2004 - 12 Malibu Pontiac: 2005 - 10 G6 Saturn: 2007 - 09 Aura

Check out our website for more!




GM Alignment Cam Lock PlatePart Nos. 86320 & 86321Locks in OEMA AdjustmentInstallation time: .3 hr/side Req.: 1 per wheel

GM Alignment PinsPart Nos. 86325 & 86326Replacement PartInstallation time: .3 hr/side 8 Pins per Package

GM Replacement Alignment Front Plate and CamPart Nos. 86375 & 86376Front Adj. Range: Camber/Caster ±1.50° Installation time: .3 hr/side Req.: 1 per Wheel

86320 Lock Plate 86325 Alignment Pins 86375 Replacement Front Plate and Cam Applications: Cadillac: RWD/4WD: 2002 & Up Escalade Chevrolet/GMC RWD/4WD: 1999 & Up 1500 & 1500HD Crew Cab; 1999 - 10 2500, 3500; 2002 - 13 Avalanche 1500, 2500; 2004 - 12 Canyon & Colorado; 2003 & Up Express/Savana Van; 2000 & Up Suburban, Tahoe, Yukon, Yukon XL (1500, 2500) Hummer AWD: 2002 - 09 H2; 2006 - 10 H3, H3T

86321 Lock Plate - Upper Arm86326 Alignment Pins - Upper Arm86376 Replacement Alignment Front Plate - Upper Arm Applications: Chevrolet/GMC RWD/4WD: 2011 & Up 2500HD, 3500HD

86321 Lock Plate - Lower Arm86326 Alignment Pins - Lower Arm86376 Replacement Alignment Front Plate - Lower Arm Applications: Chevrolet RWD/4WD: 2015 & Up Colorado GMC RWD/4WD: 2015 & Up Canyon

GM Adjustable Ball JointPart No. 23960 Front Adjustment Range: Camber ±3.0°/Caster ±3.0°Installation Time: .6 hr/side Required: 1 per wheel

Chevrolet/GMC/Hummer RWD/4WD: (With 8 Lug Wheels) 2001 - 06 1500 HD Crew Cab 1999 - 10 2500, 3500 Silverado, Sierra 2002 - 06 Avalanche 2500 2000 - 13 Suburban 2500 2000 - 14 Yukon 2500 2002 - 09 Hummer H2

GM 1-1/2 & 2 Ton Truck SleevesSeries No. 23230Front Adjustment Range: Camber/Caster ±0.25° to ±2.0° Installation time: .5 hr/side Required: 1 per wheel

Chevrolet/GMC 4WD: 2003 - 09 Kodiak/Topkick K4500 Kodiak/Topkick K5500

23200 SERIESPart # Change Part # Change Part # Change23231 .25° (1/4°) 23234 1.00° (1°) 23237 1.75° (1-3/4°)

23232 .50° (1/2°) 23235 1.25° (1-1/4°) 23238 2.00° (2°)23233 .75° (3/4°) 23236 1.50° (1-1/2°) 23239 0.00° (0°)

Chevrolet/GMC RWD/4WD:2003 & Up Express & Savana Vans

Chevrolet: 2004 - 12 ColoradoGMC: 2004 - 12 CanyonHummer: 2006 - 10 H#, H3T Isuzu: 2006 - 08 i350/i370

GM Van Alignment Cam PlatePart No. 86370Front Adj. Range: Camber/Caster ±1.50° Installation time: .5 hr/side Required: 1 per Wheel

GM Mid-Sized CamsPart No. 86360 Front Adj. Range: Camber/Caster ±1.50° Installation time: .5 hr/side Required: 1 per Wheel

GM Rear Cam Bolt (pr)Part No. 82105Rear Adjustment Range: Camber ±2.0°/Toe ±2.0°Installation Time: .3 hr/side Required: 1 per wheel

Buick: 2007 - 17 Enclave Chevrolet: 2008 - 17 TraverseGMC: 2007 - 16 Acadia 2017 Acadia LimitedSaturn: 2007 - 10 Outlook

Need to replace failed cross axis ball joints and frozen adjusters? Check out our GM xAxis™ and Cam Kit #82106




GM Truck/Van Cam Adj. ToolPart No. 45940 This wrench makes it easy to adjust the upper control arm cams on many GM trucks and vans.

Cadillac RWD/4WD: 2002 & Up EscaladeChevrolet/GMC RWD/4WD: 1999 & Up 1500 & 1500HD Crew Cab; 1999 - 10 2500, 3500; 2002 - 13 Avalanche 1500, 2500; 2004 - 12 Canyon & Colorado; 2003 - Up Express/Savana Van; 2000 & Up Suburban, Tahoe, Yukon, Yukon XL (1500, 2500) Hummer AWD: 2002 - 09 H2; 2006 - 10 H3, H3T

GM Alignment ToolPart No. 83785Save time and make adjusting front camber and caster a one-person job on popular GM platforms with this turnbuckle design tool.

Buick: 2004 - 07 RainerCadillac: 2004 - 09 SRX Chevrolet: 2004 - 06 SSR; 2002 - 09 TrailblazerGMC: 2002 - 09 EnvoyOldsmobile: 2002 - 04 Bravada

Chevolet 4WD: 1982 - 04 Blazer, S-10, Typhon GMC 4WD: 1982 - 04 Envoy, Jimmy, SonomaOldsmobile 4WD: 1991 - 01 Bravada

Cadillac/Chevrolet/GMC AWD: 1990 - 05 Astro/Safari Van4WD: 1988 - 00 1500, 2500, 3500 (99-00 Classic Only) RWD/4WD: 1992 - 94 Blazer (full size); 1988 - 91 Jimmy (full size) 1999 - 00 Escalade; 1992 - 99 Suburban; 1995 - 99 TahoeRWD: 1996 - 02 Express/Savana Van

Chevy/GMC Caster/ Camber Adj. Kit (Pr)Part No. 83710Front Adj. Range: Camber/Caster ±1.25° Installation time: .5 hr/side Required: 1 per Wheel

GM Heavy Duty Cam/Cas Kit (Pr)Part No. 83790 Front Adj. Range: Camber/Caster ±2.0° Installation time: .5 hr/side Req.: 1 per Wheel For both sides order part #87400

Cadillac RWD/4WD: 2002 - 06 EscaladeChevrolet/GMC 2002 - 06 Avalanche 1500 RWD/4WD: 1999 - 06 Silverado1500 2000 - 06 Suburban 1500 2000 - 06 Tahoe GMC RWD/4WD: 1999 - 06 Sierra 1500 2000 - 06 Yukon 1500 inc. XL

GM Front Control Arms (Pr)Part No. 86470 Front Adjustment Range: Caster +2.0° FIXEDInstallation time: .6 hr/side Required: 1 per Axle

These arms feature: Full forged construction for maximum strength. Booted and greasable ball joints that will last for the life of your truck. SPC’s xAxis™ technology with a twist. The xAxis sealed flex joints used in these arms

provide a free pivot for droop and misalignment so that OE caster and camber adjustments will not bind the joint. These joints also have rubber isolation to retain OE levels for Noise, Vibration, and Harshness (NVH).

Chevrolet: 2015 & Up ColoradoGMC: 2015 & Up Canyon

Colorado/Canyon Front Adj. Arms (Pr)Part No. 86490 Front Adj. Range: Camber ±2.0° / Caster 0° to +4.0° Installation time: .8 hr/side Req.: 1 per Axle These arms feature: Get more droop travel: Don’t let OE ball joints or mono-ball articulation limit your travel. SPC

joints are oversized and provide 80° of travel. Get your drivability and tracking back: Your truck may have started to ‘wander’ after you lifted it.

That is because you lost caster. Install SPC arms and get your ‘drivability’ back by putting your alignment in specification.

Get your tire where you want it in the wheel well: Are your oversized tires rubbing the fenders or frame rails? SPC Adjustable Arms, in combination with OE adjustments on the lower arm, allow you to dial in alignment specs at the same time that you move the tire forward/outward in the wheel well by up to 1”.

Patent No. US 7,513,514




Dodge/Ram 1500 Adj. Ball JointPart No. 23940 Front Adjustment Range: Camber ±2.25°/Caster ±2.25°Installation Time: .6 hr/side Required: 1 per wheel

Dodge Pin JointsSeries No. 23510, 23710, 23800, 23850Front Adjustment Range: Camber/Caster - See chart Installation Time: 1.0 hr/side Required: 1 per wheel

Dodge Truck SleevesSeries No. 23130 Front Adjustment Range: Camber/Caster - See chart Installation time: .5 hr/side Required: 1 per wheelPart No. 24130Front Adjustment Range: Camber/Caster - ±.75° to ±2.75°

Dodge/Ram RWD/4WD: 2006 & Up 1500 Ram (Exc. Mega Cab)

23130 SERIES Dodge RWD: 1994 - 99 3500 Ram w/mono beam Dodge 4WD: 1994 - 99 2500HD, 3500 RamPart # Change Part # Change Part # Change23131 .25° (1/4°) 23134 1.00° (1°) 23137 1.75° (1-3/4°)

23132 .50° (1/2°) 23135 1.25° (1-1/4°) 23138 2.00° (2°)23133 .75° (3/4°) 23136 1.50° (1-1/2°) 23139 0.00° (0°)

24130 ADJUSTABLE SLEEVE Dodge RWD: 1994 - 99 3500 Ram w/mono beam Dodge 4WD: 1994 - 99 2500HD, 3500 Ram

23510 SERIESDodge 4WD: 1994 - 01 1500 Ram; 1994 - 99 2500 Ram Part # Change Part # Change 23510 Camber/Caster ±.50° 23530 Camber/Caster ±1.50°

23520 Camber/Caster ±1.0° 23540 Camber/Caster ±2.0°

23710 SERIES Dodge RWD: 2002 - 02 3500 Ram w/mono beam Dodge 4WD: 2000 - 02 2500, 3500 RamPart # Change Part # Change 23710 Camber/Caster ±.50° 23730 Camber/Caster ±1.50°

23720 Camber/Caster ±1.0°

23800 SERIESDodge/Ram RWD: 2003 & Up 3500 Ram w/mono beam Dodge/Ram 4WD: 2006 - 08 15oo Ram Mega Cab; 2003 & Up 2500, 3500 Ram Part # Change Part # Change 23800 Camber/Caster ±.0.0° (Repl Part) 23820 Camber/Caster ±1.0°

23810 Camber/Caster ±.50° 23830 Camber/Caster ±1.50°

23850 SERIES Dodge/Ram RWD/4WD: 2008 & Up 4500, 5500Part # Change Part # Change 23850 Camber/Caster ±.0.0° (Repl Part) 23854 Camber/Caster ±1.0

23852 Camber/Caster ±.50°

23580 - Ball joint press sleeves72509 - Ball joint press

Series No. 23510, 23710, 23800

88360 - Pin Adjusting Wrench

Series No. 23850

23130

23510

23710, 23800

23850

Sprinter Van Front Adjuster Kit (pr)Part Nos. 35075, 35076 Installation Time: .6 hr/side Required: 1 per wheel

Front Adjustment Range: 35075 Camber -1.0° (Fixed)35076 Camber -2.0° (Fixed)Dodge: 2003 - 06 Sprinter Van

Sprinter Van Front Adjuster Kit (pr) Part No. 35077Front Adjustment Range: Camber ±3.0°Installation Time: .4 hr/side Required: 1 per axle

Dodge: 2007 - 09 Sprinter Van

4WD & RWD Dodge Truck Cam/Cas KitsPart Nos. 23755, 23765Front Adjustment Range: Camber ±1.00°/Caster ±1.50°Installation Time: .3 hr/side Required: 1 per wheel

23755 Applications:Dodge 4WD: 2002 - 05 1500 Ram

23765 Applications:Ram RWD: 2002 - 05 1500 Ram

24130




Dodge Camber ToolPart No. 6140This wrench is specifically designed to access the hard to reach upper contol arm bolts used to adjust caster and camber on 2WD Dodge Durangos and Dakotas.

Dodge RWD: 1987 - 04 Dakota 1998 - 03 Durango

Dodge 4WD: 1994 - 99 Ram With 36mm Cams Dodge Caster/Pinion Angle Adj. (pr)

Part No. 82380Front/Rear Adjustment Range: Caster ±1.50°/Pinion ±1.50°Installation time: .4 hr/axle Required: 1 per Axle

Dodge Caster/Pinion Cams (pr)Part No. 82385 Front Adjustment Range: Caster ±2.0°/Pinion ±2.0° Installation time: .4 hr/axle Required: 1 per Axle

Dodge 4WD: 2000 - 09 2500, 3500 Ram 2006 - 08 1500 Ram Mega CabDodge RWD: 2000 - 09 3500 Ram w/mono beam

74910 - Punch

82386 Applications:Ram 4WD: 2010 - 13 2500; 2010 - 13 3500Ram RWD: 2010 - 13 3500 w/mono beam82387 Applications:Ram 4WD: 2014 & Up 2500; 2014 & Up 3500Ram RWD: 2014 & Up 3500 w/mono beam

HD Ram Adjustable Cam Kit (pr)Part No. 82386, 82387Front Adjustment Range: Caster ±2.0°/Pinon ±2.0°Installation time: .5 hr/axle Required: 1 per Axle

Dodge Caster/Pinion Cams (pr)Part No. 82395 Front Adjustment Range: Caster ±1.50°/Pinon ±1.50° Installation time: .4 hr/axle Required: 1 per Axle

Dodge 4WD: 1994 - 99 1500 Ram, 2500 Ram HD, 3500 Ram Dodge RWD: 1994 - 99 3500 Ram w/mono beam

Dodge 4WD/RWD: 2005 - 11 Dakota Dodge Dakota Cam./Cas. Adj. Kit (pr)Part No. 82400Front Adjustment Range: Camber/Caster ±2.0°Installation time: .4 hr/axle Required: 1 per Wheel

Dodge/Ram 4WD/RWD: 2006 & Up Ram 1500 Exp. Mega CabRam 4WD/RWD: 2011 & Up 1500

Dodge 1500 Cam Kit (pr)Part No. 82420Front Adjustment Range: Camber/Caster ±2.0°Installation time: .4 hr/axle Required: 1 per Wheel

Dodge: 1972 - 89 AD150 1972 - 87 D100, D150, D200, D250. D300, D350, D400, D450 1974 - 87 Ramcharger

Dodge OE Replacment Cam./Cas. Kit (pr) Part No. 83160Front Adjustment Range: Camber or Caster ±2.0°Installation time: .4 hr/side Required: 1 per Wheel

Dodge Front Cam./Cas. Adjusting KitPart No. 82360 Front Adjustment Range: Camber ±1.50°/Caster ±1.50°Installation Time: .5 hr/side Required: 1 per wheel

Dodge: 2011 & Up Durango




Front Camber/Caster Strut Mount (pr)Part No. 72060 Front Adj. Range: Camber -.5° to +1.5°/Caster 0° to ±1.5°Installation time: 1.0 hr/side Required: 1 per axle

Rear Adjustable Trailing Arms (pr)Part No. 72345Rear Adjustment Range: Pinion ±4.0°/Additional ThrustInstallation Time: .6 hr/axle Required: 1 per axle

Ford: 2005 - 14 Mustang

Rear Adjustable Panhard BarPart No. 72045 Rear Adjustment Range: Tracking ±1.5”Installation time: .5 hr/axle Required: 1 per axle



#72355 Includes only one caster cam

Mustang Front Alignment KitsPart Nos. 72350 & 72355Front Adj. Range: 72350 Camber ±1.5° Caster ±.50° Install. time: 1.0 hr/axle Req.: 1 per axle 72355 Caster ±.50° Install. time: .4 hr/side Req.: 1 per wheel

Ford: 2005 - 14 Mustang US Patent Nos. 8,544,861 • 8,469,375 • D783,393

Mustang Rear Camber ArmPart No. 72370Rear Adjustment Range: Camber -2.0° to +3.0°Installation time: .6 hr/side Required: 1 per wheel

Ford: 2015 & Up Mustang

Front Camber/Caster Strut Mount (pr)Part No. 72040 Front Adjustment Range: Camber ±2.0°/Caster ±2.0°Installation time: 1.0 hr/side Required: 1 per axle


81260 Ford: 2005 - 14 Mustang 81280 Ford: 2015 & Up Mustang 1979 - 04 MustangUS Patent Nos. 8,544,861 • 8,469,375 • D783,393

EZ Cam™Part Nos. 81250, 81260 Front Adjustment Range: Camber ±1.75°Installation time: .5 hr/side Required: 1 per axle

Mustang Adjustable Arm - 2nd GenPart No. 94210Front Adjustment Range: Camber -1°, 0°, or +1°Installation time: .7 hr/side Required: 1 per wheel


Mustang Adj. Arm and Caster Rod - 1st GenPart No. 94215 & 94220Front Adj. Range: 94215 Camber +.75° to +2.0° Caster +1.0° to +5.0° Install. time: 1.5 hr/side Req.: 1 per wheel 94220 Caster ±2.0° (Caster Rod Only) Install. time: .5 hr/side Req.: 1 per wheel

Ford: 1964.5 - 66 Mustang




Truck Sleeves

Series No. 23230 Fixed SleeveFront Adjustment Range: Camber/Caster ±0.25° to ±2.0° Installation time: .5 hr/side Required: 1 per wheel


23232 .50° (1/2°) 23235 1.25° (1-1/4°) 23238 2.00° (2°)23233 .75° (3/4°) 23236 1.50° (1-1/2°) 23239 0.00° (0°)

Series No. 23220 Fixed SleeveFront Adjustment Range: Camber/Caster ±0.25° to ±2.5° Installation time: .5 hr/side Required: 1 per wheel Ford RWD/4WD: 2005 & Up F250, F350

Solic Axle, Coil Spring 2005 & Up F450 With 8 Lug Axles

23220 SERIES Part # Change Part # ChangePart # Change 23224 1.00° (1°) 23228 2.00° (2°)23221 .25° (1/4°) 23225 1.25° (1-1/4°) 23229 0.00° (0°)

23222 .50° (1/2°) 23226 1.50° (1-1/2°) 23211 2.25° (2-1/4°)23223 .75° (3/4°) 23227 1.75° (1-3/4°) 23212 2.50° (2-1/2°)

Part No. 24220 Adjustable SleeveFront Adjustment Range: Camber/Caster ±2.5° Installation time: .5 hr/side Req.: 1 per wheel

Ford RWD/4WD: 2005 & Up F450, F550 With 10 Lug AxlesPart No. 24230 Adjustable SleeveFront Adjustment Range: Camber/Caster ±2.75° Installation time: .5 hr/side Required: 1 per wheel


Ford RWD/4WD: 1999 - 04 F450, F550 1999 - 04 F250, F350 Solid Axles/Leaf Springs Ford 4WD: 1980 - 96 Brono-Full Size; 1980 - 96 F150 1980 - 98 F250, F340; 2000 - 05 Excursion 1992 - 98 F350 Crew Cab


23132 .50° (1/2°) 23135 1.25° (1-1/4°) 23138 2.00° (2°)23133 .75° (3/4°) 23136 1.50° (1-1/2°) 23139 0.00° (0°)

Part No. 24130 Adjustable SleeveFront Adjustment Range: Cam./Cas. ±.75° to ±2.75° Minimum Adjustment ±.75 Installation time: .5 hr/side Required: 1 per wheel


Ford RWD: 1989 - 90 Bronco II, 2000 - 05 Excursion; 1992 & Up E150, E250, E350, E450 1987 - 96 F150, 1987 - 98 F250, F350 1998 & Up F250, F350 Twin I-Beam Ford 4WD: 1990 - 90 Bronco II (Late 90-Dana 35) Ford RWD/4WD: 1991 - 94 Explorer; 1990 - 97 Ranger Mazda RWD/4WD: 1994 - 97 B-Series Pickup, 1991 - 94 Navajo

23180 SERIES RWD 4WD RWD 4WD RWD 4WD

Part # Change Change Part # Change Change Part # Change Change23181 .25° .20° 23186 1.50° 1.10° 23191 2.75° 2.00°23182 .50° .40° 23187 1.75° 1.25° 23192 3.00° 2.25°23183 .75° .60° 23188 2.00° 1.40° 23193 3.25° 2.50°

23184 1.00° .75° 23189 2.25° 1.60° 23194 3.50° 2.75°23185 1.25° .90° 23190 2.50° 1.80° 23199 0.00° 0.00°

23268, 23269 Fixed SleevesFor lifted trucks 26238 - Drivers SideCamber +0.50° Caster +2.3° 26238 - Passenger SideCamber +0.30° Caster +2.6°

Part No. 24180 Adjustable SleeveFront Adjustment Range: Cam./Cas. ±.75° to ±2.75° Minimum Adjustment ±.75 Installation time: .5 hr/side Required: 1 per wheel

67285 Ford FWD/AWD: 2001 - 12 Escape Mazda FWD/AWD: 2001 - 11 Tribute Mercury FWD/AWD: 2005 - 11 Mariner

67420 Ford FWD/AWD: 2013 & Up Escape

Escape Rear Camber Arms67285 - Rear Adj. Range: Camber ±2.0 Installation time: .8 hr/side Required: 1 per wheel67420 - Rear Adj. Range: Camber -1.5° to +5.0° Installation time: .5 hr/side Required: 1 per wheel67285

67420




F150 Camber/ Caster Kits86250 Standard Cam Nut/Bracket Front Adj. Range: Camber ±1.00°/Caster ±1.50Installation time: .3 hr/side Required: 1 per Wheel86252 Heavy Duty/Raptor Bolt/Bracket Front Adj. Range: Camber ±1.00°/Caster ±1.50 Installation time: .8 hr/side Required: 1 per WheelFord RWD/4WD: 2007 & Up Expedition; 2004 -14 F150/Raptor Lincoln: 2002 - 03 Blackwood; 2006 - 09 Mark LT; 2007 & Up Navigator

Ford: 2003 - 06 Expedition Lincoln: 2003 - 06 Navigator

F150 Camber/Caster KitPart No. 87385Front Adj. Range: Camber ±2.0°/ Caster ±2.0 Installation time: .4 hr/side Required: 1 per AxleFord RWD/4WD: 1997 - 02 Expedition 1997 - 03 F150; 2004 - 05 F150 Heritage 1997 - 99 250 (LD)Lincoln RWD/4WD: 1998 - 02 Navigator

Ford RWD/4WD: 1995 - 01 Explorer 2001 - 05 Explorer Sport Trac 1998 - 11 RangerMazda RWD/4WD: 1998 - 12 B-Series Mercury RWD/4WD: 1996 - 01 Mountaineer

Explorer/Ranger Camber/Caster KitPart No. 87500Front Adj. Range: Camber ±2.0°/ Caster ±2.0 Installation time: .4 hr/side Required: 1 per Axle

Ford: 2002 - 05 Explorer

Lincoln: 2003 - 05 Aviator

Mercury: 2002 - 05 Mountaineer

Explorer/Mountaineer Kits86140 - Front Adj. Range: Camber ±.75°/Caster ±1.25 Installation time: .4 hr/side Required: 1 per Axle86180 - Rear Adj. Range: Camber ±.50° Installation time: .2 hr/side Required: 1 per Axle

81640

81680 86250

86252

86640

86680

Ford: 2004 & Up F150

F150 Pinion Angle ShimsPart No. 86255Rear Adj. Range: Pinion ±2.5 Installation time: .5 hr/side Required: 1 per Axle

86640 - Front Adj. Range: Camber ±1.0°/Caster ±1.5 Required: 1 per Wheel86680 - Rear Adj. Range: Camber ±1.0° Required: 1 per Wheel

Get more droop travel: Don’t let OE ball joints or mono-ball articulation limit your travel. SPC joints are oversized and provide 80° of travel.


Get your tire where you want it in the wheel well: Are your oversized tires rubbing the fenders or frame rails? SPC Adjustable Arms, in combination with OE adjustments on the lower arm, allow you to dial in alignment specs at the same time that you move the tire forward/outward in the wheel well by up to 1”.

Get your drivability and tracking back: Your truck may have started to ‘wander’ after you lifted it. That is because you lost caster. Install SPC arms and get your ‘drivability’ back by putting your alignment in specification.

25680 Ford F150Front Adj. Range: Camber ±2.0° Caster -1.0° to +3.0° Installation time: .8 hr/side Required: 1 per AxleFord: 2004 & Up F150 (Except Raptor) Lincoln: 2006 - 08 Mark LT

25670 Ford RangerFront Adj. Range: Camber ±2.0° Caster -1.0° to +3.0° Installation time: .8 hr/side Required: 1 per AxleFord: 2019 & Up Ranger

Ford F150 & Ranger Front Upper Adjustable Control Arms (Pr)

Ford Expedition Kits67275 - Rear Adj. Range: Camber ±3.0°Required: 1 per Wheel86690 - Rear Adj. Range: Camber ±1.50° Required: 1 per Wheel

Ford: 2007 - 17 Expedition Lincoln: 2007 - 17 Navigator

67275

86690

Honda 5 Arm SetPart No. 67289Rear Adjustment Range: 67289 (5 ARM SET) Camber: ±3.0° (Install time: .7 hr/side) Toe: ±3.0° Setback: ±1.0” 67290 (Install time: .5 hr/side) Camber: -2.0° to +4.0° 67291 (Install time: .5 hr/side) Camber: ±3.0° 67292 (Install time: .5 hr/side) Setback: 1” to +1” 67293 (Install time: .5 hr/side) Setback: 1” to +1” 67295 (Install time: .5 hr/side) Toe: ±3.0° Required: 1 per wheel




67030 Honda:1988 - 00 Civic1997 - 01 CR-V1988 - 92 CRX1992 - 97 Del Sol

67230 Honda:2001 - 05 Civic

67090 Honda: 67290 Honda:1998 - 02 Accord 2003 - 07 Accord 1999 - 04 Oddyssey 2003 - 08 Pilot

Honda Rear EZ Arms™Part Nos. 67030 & 6723067030 Rear Adjustment Range: Camber -2.0° to +5.0°67230 Rear Adjustment Range: Camber -4.0° to +6.0° Installation time: .5 hr/side Required: 1 per Wheel

Honda Rear EZ Arm™Part Nos. 67090 & 67290 Rear Adjustment Range: Camber -2.0° to +4.0° Installation time: .5 hr/side Req.: 1 per Wheel

Adjustable Ball JointsPart Nos. 67125, 67135, 67145,67155, 67165, 67220Front Adjustment Range: Standard: Camber ±1.5° Extended: Camber +1.5° to +3.0°Installation time: .6 hr/side Required: 1 per wheel

67125 Standard Honda: 1998 - 02 Accord; 1998 - 01 Civic; 1988 - 92 CRX67320 Extended 1995 - 98 Odyssey 67135 Standard Honda: 2003 - 12 Accord; 2010 - 15 Accord Crossover 67330 Extended 1992 - 00 Civic; 1997 - 01 CRV; 1992 - 97 Del Sol 1997 - 02 Prelude (Non-SH) 67145 Standard Honda: 1990 - 97 Accord67340 Extended67165 Standard Honda: 1992 - 95 Prelude; 1997 - 02 Prelude SH 67360 Extended 1992 - 94 Prelude 4WS / 1992 - 02 Prelude - REAR67155 Standard Honda: REAR 1995 - 98 Odyssey; 1997 - 02 Prelude SH67220 Standard Honda: 2000 - 09 S2000 Front & Rear with 17” Rims or larger

Honda:2016 & Up Pilot2017 & Up Ridgeline

Honda Rear Adjustable Ball JointPart No. 23450Rear Adjustment Range: Camber -±3.0° Installation time: .6 hr/side Required: 1 per Wheel

See the web for in-depth information on this kit and how it will work in the Honda/Acura

multi-link suspension.

67295

67295

67292

6729167293

67290

67289, 67290, 67291, 67292, 67293, 67295Honda: 2003 - 07 Accord 67290 ONLY Honda: 1999 - 04 Odyssey 2003 - 08 Pilot

6729167293

67292

67290

67230

67030

Honda:2018 Accord2016 & Up Civic (not Type R)2017 & Up CR-V

Honda Adjustable Lower Ball JointPart Nos. 67381 & 6738267381 Rear Adjustment Range: Camber -2.0° to +5.0°67382 Rear Adjustment Range: Camber -4.0° to +6.0° Installation time: .6 hr/side Required: 1 per Wheel




Honda CRV Rear Camber ArmPart No. 67580Rear Adjustment Range: Camber -2.0° to +4.0° Installation time: .5 hr/side Required: 1 per Wheel

Honda: 2008 - 17 Accord 2010 - 15 Crosstour

Honda: 2007 - 16 CR-V

Honda Rear Adjustable 3 Arm SetPart No. 67540 (Inc. 67545, 67550, 67555) Rear Adjustment Range: 67540 Camber: ±3.0°/Toe: ±1.0°/Setback: ±1.0° (3 ARM SET) Install Time: .8 hr/side 67545 Camber: ±1.0° Install Time: .3 hr/side67550* Setback: ±1.0” Install Time: .3 hr/side67555* Toe: ±1.0° Install Time: .3 hr/sideRequired: 1 per wheel *Must be used with 67545

67545

67555

67550

67545 Camber

67555 Toe

Honda: 81260 2012 - 15 Civic Except Si 2006 - 11 Civic 2001 - 02 Civic 2006 - 18 Fit 2001 - 14 Insight

81280 2012 - 15 Civic Si 2003 - 05 Civic 2002 - 15 CR-V 2003 - 11 Element 2016 - 18 HR-V 1999 - 17 Odyssey 2003 - 08 Pilot

EZ Cams™

Part Nos. 81260, 81280, 81295 Front Adustment Range: Camber ±1.75° Installation time: .5 hr/side Required: 1 per axle

81295 2009 - 15 Pilot; 2006 - 14 Ridgeline

Honda Camber BracketPart No. 67465Rear Adjustment Range: Camber ±1.25° Install time: .75 hr/side Req.: 1 per Wheel

Honda Rear Camber ArmPart No. 67466 & 67467Rear Adjustment Range: Camber ±3.0° Install time: .5 hr/side Req.: 1 per Wheel

Honda Hi Performance ArmPart No. 67475 & 67476Rear Adjustment Range: Camber ±3.0° Install time: .5 hr/side Req.: 1 per Wheel

Honda: 67465, 67466, 67475 2006 - 15 Civic (Inc Si/Hybrid)67467 2016 & Up Civic (Except Type R)67476 2016 & Up Civic (Including Si and Type R) 2017 & Up CR-V

6746567466

67475Good

67465

Better67466

Best67475

REAR Camber Change Install Time Construction Bushing Weight

Stamped Replace

±1.25° .75 hr/side Steel OE > OE Inner

Forged OE ±3.0° .5 hr/side Steel Style = OE

Forged xAxis™

±3.0° .5 hr/side Aluminum Outer < OE

Honda 2006 & Up Civic, (Incl. Si, Hybrid)Acura 2006 - 11 CSX; 2013 & Up ILX

67550 Setback

67467

67476

Honda Rear Camber ArmsPart No. 67570 & 67590 Rear Adjustment Range: Camber -2.0° to +4.0° Installation time: .5 hr/side Required: 1 per Wheel

Honda: 67570 2009 - 15 Pilot67590 2005 - 17 Odyssey

Honda Ridgeline Rear Camber ArmPart No. 67490 Rear Adjustment Range: Camber ±2.0° Installation time: .5 hr/side Required: 1 per Wheel

Honda: 2006 - 14 Ridgeline

US Patent Nos. 8,544,861 • 8,469,375 • D783,393China Patent No. 01630012294.XOther Patents Pending




Adjustable Ball JointPart Nos. 67190, 67195Front Adjustment Range: Camber ±1.5° Installation time: .6 hr/side Req.: 1 per wheel

Santa Fe Rear Camber/Toe BoltsPart No. 67493Rear Adjustment Range: Camber ±3.0°/Toe ±1.5°Installation time: .8 hr/side Req.: 1 per wheel

67493: 01 - 06 Santa Fe

Hyundai Rear EZ ArmPart No. 67410Rear Adjustment Range: Camber ±2.0°/Toe ±2.0°Installation Time: .5 hr/side Req.: 1 per wheel

67410: 07 - 12 Elantra; 11 - 12 Elantra Touring

EZ Cams™

Part Nos. 81250, 81260, 81280 Front/Rear Adjustment Range: Camber ±1.75°Installation time: .5 hr/side Required: 1 per axle

EZ Shims™

Part Nos. 75600, 75800 Rear Adj. Range: Camber ±1.50°/Toe ±1.50°Installation time: .5 hr/side Req.: 1 per wheel

Entourage Rear Cam BoltsPart No. 84120Rear Adjustment Range: Camber ±.75°Installation time: .4 hr/side Req.: 1 per wheel

84120: 07 - 09 Entourage

Santa Fe Rear Adj. Arm/Toe BoltPart No. 67495Rear Adjustment Range: Camber ±3.5°/Toe ±1.5°Installation time: .5 hr/side Req.: 1 per wheel

67495: 03 - 06 Santa Fe

81250: 18 & Up Accent; 95 - 11 Accent; 92 - 06 Elantra; 07 - 09 Entourage 86 - 94 Excel; 01 - 06 Santa Fe; 90 - 95 Scoupe; 97 - 02 Tiburon81260: 12 - 17 Accent; 11 - 18 Elantra; 11 - 12 Elantra Touring 18 & Up Elantra GT Sport; 10 - 16 Genesis Coupe; 18 & Up Kona 07 -18 Santa Fe; 18 & Up Sonata; 1/11 - 4/11 Sonata 89 - 98 Sonata; 03 - 09 Tiburon; 05 & Up Tuscon; 12 - 17 Veloster 07 - 12 Veracruz81280: 12 - 17 Azera; After 5/11 - 17 Sonata

75600: 06 - 11 Accent, 12 - 17 Veloster75800: 06 - 11 Accent

67190: 2006 Azera (before 10-31-06) 99 - 06 Sonata (before 9-21-06) 02-05 XG35067195: 07 - 11 Azera (after 10-31-06) 07 - 10 Sonata (after 9-21-06)

Hyundai Camber ShimSeries No. 71930Rear Adj. Range: Camber ±.50°/±.75°/±1.0°/±1.25°Installation time: .5 hr/side Req.: 1 shim per wheel

71930: 09 - 14 Genesis Sedan 11 - 13 Equus

Camber71930: Inc. 8 shims/2 each 71932: ±.50° 71933: ±.75°71934: ±1.00° 71935: ±1.25°

Accent Rear Camber ShimSeries No. 71070Rear Adj. Range: Camber ±.13°/±.25°/±.38°/±.50°Installation time: .5 hr/side Req.: 1 shim per wheel

71070: 12 - 17 Accent Camber71070: Inc. 8 shims/2 each 71071: ±.13° 71072: ±.25°71073: ±.38°* * Includes brake71074: ±.50°* caliper shim

Hyundai Rear Adjustment CamsPart No. 84100Rear Adjustment Range: Camber ±.1.5°/Toe ±.1.5°Installation time: .4 hr/side Required: 1 per wheel

84100: 07 - 12 Santa Fe 07 - 12 Veracruz

Part No. 13410 Jeep JK Front Adjustable Upper Control Arm w/xAxis™Part No. 13411 Jeep JL/JT Front Adjustable Upper Control Arm w/xAxis™Front Adjustment Range: Caster & Pinion ±3.0°Installation Time: .5 hr/side Req.: 2 per AxlePart No. 13415 Jeep JK Front Lower Control Arm w/xAxis™Part No. 13416 Jeep JL/JT Front Lower Control Arm w/xAxis™Front Replacement PartInstallation Time: .5 hr/side Req.: 2 per Axle

Jeep JK/JL/JT Rear Lower Control Arm w/xAxis™Part No. 13426Rear Replacement PartInstallation Time: .5 hr/side Req.: 2 per Axle

Jeep JK/JL/JT Rear Adjustable Upper Control Arm w/xAxis™Part No. 13421 Rear Adjustment Range: Pinion ±3.0°Installation Time: .5 hr/side Req.: 2 per Axle

Jeep JK/JL Suspension Arm SeriesThese direct-fit control arms add strength, and articulation flex ibility to your stock-height or ‘lifted’ Wrangler. They feature SPC’s xAxis™ sealed flex joints to provide bind-free ‘twist’ between the frame and axle during articulation and O.E. ‘Clevite’ bushings for long service life and reduced N.V.H. Main tubes are D.O.M steel to provide strength for large tires and aggressive gearing. Bent arms provide additional clearance for taller/wider tires.Applications: Jeep 2007 - 18 Wrangler (JK) Jeep 2019 & Up Wrangler (JL); 2020 & Up Gladiator (JT)

13410/13411

13415/13416

13421

13426

Jeep: 2006 - 10 Commander 2005 - 10 Grand CherokeeJeep Adjustable Ball Joint

Part No. 23410 Front Adjustment Range: Camber ±1.5° Installation time: .6 hr/side Req.: 1 per Wheel

23510 Cam/Cas ±.50° 23520 Cam/Cas ±1.00° 23530 Cam/Cas ±1.50° 23540 Cam/Cas ±2.00° Jeep: 1984 - 01 Cherokee; 1986 - 92 Comanche 1993 - 04 Grand Cherokee; 1984 - 90 Wagoneer 1987 - 18 Wrangler (JK)

Jeep Pin JointsPart Nos. 23510 - 23540 Front Adjustment Range: Camber ±1.5° Installation time: 1.0 hr/side Req.: 1 per Wheel

Jeep: 2007 - 18 Wrangler (JK)Jeep Tie Rod Adjuster SleevesPart No. 23605 Front Replacement Part Installation time: .5 hr/side Req.: 1 per Wheel

Make Installation Easier - Check out our Ball Joint Press and Press Sleeves on Back!

Make InstallationEasier - Check out our Ball Joint Press on back!




Jeep RWD: 1994 - 01 Cherokee (XJ)Jeep 4WD: 1994 - 01 Cherokee (XJ) 1993 - 01 Grand Cherokee (ZJ/WJ); 1984 - 90 Wagoneer (XJ) 1987 - 06 Wrangler (YJ/TJ)Jeep FWD/4WD: 2002 - 07 Liberty (KJ)Jeep RWD/4WD: 1986 - 92 Comanche (MJ) 2006 - 10 Commander (XK); 2007 - 18 Wrangler (JK)

Jeep Camber ShimsPart Nos. 26012 & 26014 Front Adjustment Range: 26012 Camber +.50° 26014 Camber +1.0° Installation time: .5 hr/side Req.: 1 per Wheel

82380 Applications Jeep 4WD: 1997 - 06 Wrangler (TJ) 82390 Applications (Front & Rear)Jeep RWD/4WD: 2007 - 18 Wrangler (JK)

Jeep: 2011 & Up Grand CherokeeJeep Front Camber/Caster KitPart No. 82360 Front Adj. Range:Camber ±1.5°/Caster ±1.5° Installation time: .5 hr/side Req.: 1 per Wheel

Jeep: 2002 - 07 LibertyJeep Front Camber/Caster KitPart No. 82365 Front Adj. Range:Camber ±1.5°/Caster ±1.5° Installation time: .4 hr/side Req.: 1 per Wheel

Jeep FWD/AWD: 1993 - 99 Grand Cherokee (ZJ) 1997 - 06 Wrangler (TJ)

Make InstallationEasier - Check out

#74910 Punch below!

Magnetic Angle Gauge Part No. 67225

Easy, accurate way for measuring frame and drive shaft angles

Knock Out PunchPart No. 74910For removing the alignment inserts on upper control arm alignment brackets without damaging the bracket. Use to install 82380 & 82390 Caster/Pinon Adjusters.

Specialty Alignment ToolsRWD/4WD Ball Joint PressPart No. 72509 Remove and replace ball joints without ‘brute force’ methods which can cause damage.Part No. 23580 Designed to match the yoke on the axle housing. For installation of 23510 - 23540 Pin Joints.

Jeep Rear Pinion Angle BoltsPart No. 82370 Rear Adj. Range: Pinion ±2.0° Installation time: .3 hr/axle Required: 1 per Axle

Jeep Caster/Pinon AdjustersPart Nos. 82380 & 82390 Front Adj. Range: Caster ±1.5°/Pinion ±1.5° Installation time: .4 hr/side Req.: 1 per Axle




47240 1/32” 47241 1/16” 47242 1/8” Jeep: 1984 - 01 Cherokee (XJ) 1986 - 92 Comanche (MJ) 1993 - 04 Grand Cherokee (WJ/ZJ) 1984 - 90 Wagoneer (XJ)

Jeep Caster ShimsPart Nos. 47240, 47241, 42742 Front Adjustment Range: 1/32” to 1/8”Installation time: .5 hr/side Req.: 1 per Wheel

Jeep AWD/FWD: 2007 - 17 Compass 2007 - 17 Patriot


Jeep Rear Camber ArmPart No. 67455 Rear Adjustment Range:Camber ±2.0° Installation time: .5 hr/side Req.: 1 per Wheel

81250 Jeep AWD/FWD: 2017 & Up Compass (MP) 2015 & Up Renegade (BU)81260 Jeep AWD/FWD: 2007 - 17 Compass (MK) 2007 - 17 Patriot (MK)US Patent Nos. 8,544,861 • 8,469,375 • D783,393

EZ Cam™Part Nos. 81250, 81260 Front Adjustment Range: Camber ±1.75°Installation time: .5 hr/side Required: 1 per axle

Series No. 23400 Fixed SleeveFront Adjustment Range: Camber/Caster ±0.25° to ±1.25° Required: 1 per wheel

23400 JEEP JL/JT WRANGLER SLEEVESPart # Change Part # Change Part # Change23401 .25° (1/4°) 23403 .75° (3/4°) 23405 1.25° (1-1/4°)

23402 .50° (1/2°) 23404 1.00° (1°) 23409 0.00° (0°)

72590

23580

Jeep: 2018 & Up Wrangler (JL) 2020 & Up Gladiator (JT)




Adjustable Ball JointPart Nos. 67190, 67195Front Adjustment Range: Camber ±1.5° Installation time: .6 hr/side Req.: 1 per wheel

Kia Rear EZ ArmPart No. 67410Rear Adjustment Range: Camber ±2.0°/Toe ±2.0°Installation Time: .5 hr/side Req.: 1 per wheel

67410: 07 - 10 Optima 07 - 12 Rondo

EZ Cams™

Part Nos. 81250, 81260, 81280 Front/Rear Adjustment Range: Camber ±1.75°Installation time: .5 hr/side Required: 1 per axle

EZ Shims™

Part Nos. 75600, 75800 Rear Adj. Range: Camber ±1.50°/Toe ±1.50°Installation time: .5 hr/side Req.: 1 per wheel

Sedona Rear Cam BoltsPart No. 84120Rear Adjustment Range: Camber ±.75°Installation time: .4 hr/side Req.: 1 per wheel

84120: 2008 & Up Sedona

81250: 01 & Up Rio; 06 - 11 Rio5; 06 - 14 Sedona/ 94 - 02 Sephia 01 - 09 Spectra 81260: 09 & Up Forte; 17 & Up Niro; 07-11 Optima (before 7/11) 07 - 12 Rondo; 02 - 05 Sedona 11 - 15 Sorento; 09 & Up Soul; 05 & Up Sportage81280: 14 & Up Cadenza; 12 - Up Optima (after 7/11) 15 - Up Sedona; 16 & Up Sorento

75600: 09 & Up Forte; 09 & Up Soul75800: 01 - 11 Rio; 06 - 11 Rio5

67190: 04 - 06 Amanti 01 - 06 Optima67195: 07 - 11 Amanti

Kia Camber ShimSeries No. 71930Rear Adj. Range: Camber ±.50°/±.75°/±1.0°/±1.25°Installation time: .5 hr/side Req.: 1 shim per wheel

71930: 2015 K900 Camber71930: Inc. 8 shims/2 each 71932: ±.50° 71933: ±.75°71934: ±1.00° 71935: ±1.25°

Rio Rear Camber ShimSeries No. 71070Rear Adj. Range: Camber ±.13°/±.25°/±.38°/±.50°Installation time: .5 hr/side Req.: 1 shim per wheel

71070: 12 - 17 Rio Camber71070: Inc. 8 shims/2 each 71071: ±.13° 71072: ±.25°71073: ±.38°* * Includes brake71074: ±.50°* caliper shim

Kia Rear Adjustment CamsPart No. 84100Rear Adjustment Range: Camber ±.1.5°/Toe ±.1.5°Installation time: .4 hr/side Required: 1 per wheel

84100: 08 - 11 Borrengo 11 - 15 Sorento

Mercedes Camber/CasterCamPart Nos. 28810, 28815Front Adjustment Range: Camber/Caster +.3° or -.3°

(fixed change)Installation time: .5 hr/side Req.: 1 per wheel per adjustment

Wheel SpreaderPart No. 99918

Take the play out of front wheels during alignment!Place this spring-loaded pressure bar between the tires to

assure a more accurate alignment. A must for Mercedes vehicles.

Need the most recent applications? Want to find out aboutSPC’s newest parts? Go online for our latest solutions!


Mercedes Rear Camber KitsPart Nos. 28840, 28850, 28860Rear Adjustment Range:

Camber ±1.25°Installation Time: .6 hr/side Req.: 1 per wheel

28840: (Uses 75990 Press Set Below)01-07 C-Class (W203), 94-00 C-Class (W202),03-09 CLK-Class (W209), 98-03 CLK-Class (W208),86-95 E-Class (W124), 96-02 E-Class Except Wagon (W210),99-02 SL-Class (W129), 96-11 SLK-Class (R170, R171)28850: (Uses 76000 Press Set Below)08-15 C-Class (W204 & W205), 10-15 E-Class (W212)09-15 GLK-Class (X204)28860: (Uses 76000 Press Set Below)03-09 E-Class (W211)


EZ Cams™Part No. 81260Front Adj. Range: Camber ±1.75°Installation time: .5 hr/side Req.: 1 per axle

81260: 12-15 B-Class (W246), 05-11 B-Class (W2450), 08-14 C-Class (W204 4MATIC), 01-07 C-Class (W203 4MATIC)14-15 CLA-Class (C117), 12-15 CLS-Class (W218 4MATIC),10-15 E-Class (W212 4MATIC), 15-15 GLA-Class (X156),09-15 GLK-Class (X204)

28810: 08-14 C-Class (W204), 08-14 C-Class (W204 4MATIC), 01-07 C-Class (W203), 01-07 C-Class (W203 4MATIC), 07-14 CL-Class (C216), 04-09 CLK-Class (W209),2003 CLK-Class (209 Coupe), 12-15 CLS-Class (W218),12-15 CLS-Class (W218 4MATIC), 05-11 CLS-Class (W219),10-15 E-Class (W212), 10-15 E-Class (W212 4MATIC), 03-09 E-Class (W211),09-15 GLK-Class (X204), 06-13 S-Class (W222),99-05 S-Class (W220),03-12 SL-Class (R230), 12-15 SLK-Class (R171), 05-11 SLK-Class (R171)28815: 94-00 C-Class (W202), 00-06 CL Class (C215),2003 CLK-Class (W208 Cabriolet),98-02 CLK-Class (W208), 96-04 SLK-Class (R170)

81260

28810

28840

28815

Ball Joint Press & Press SetsPart Nos. 72509, 75990 (for #28840), 76000 (for #28850 & 28860)Save time and money installing SPC’s Rear Camber Kits (above). By using our specifically designed Bushing Press Adapter Sets you can quidkly and easily remove the OE rear control bushing and insertthe SPC Adjustable Bushing. These tool sets are a must for any shop servicing Mercedes vehicles.

28850, 28860

Sprinter Van Front KitsPart Nos. 35075, 35076, 35077Rear Adjustment Range: 35075 Camber +1.0° (fixed change) Installation Time: .2 hr/side 35076 Camber +2.0° (fixed change) Req.: 1 per wheel35077 Camber ±3.0° Install. Time: .6 hr/side Req.: 1 per wheel

35075/35076: 01-06 Sprinter Van

35077: 07-15 Sprinter Van

35077

35075, 35076

76000

7599072590

Nissan & Infiniti Rear KitsExtreme Rear Camber/Toe Kit Arms w/OE style bushings & Cam Bolts Part Nos. 72050 & 72260Rear Adjustment Range: Camber ±3.0° Toe ±2.0°Installation time: .7 hr/side Req.: 1 per Wheel

Performance Rear Camber/Toe Kit Arms w/xAxis sealed joints, Cam Bolts & Locking PlatesPart Nos. 72052 & 72262Rear Adjustment Range: Camber ±3.0° Toe ±2.0°Installation time: .7 hr/side Req.: 1 per Wheel

Rear Camber Toe Kit Cam Bolts OnlyPart Nos. 72055 & 72265Rear Adj. Range: Camber ±3.0° Toe ±2.0°Installation time: .7 hr/side Req.: 1 per Wheel

Front Adjustable Control ArmsPart No. 72123 (w/shim kit & spacers)Front Adjustment Range:

Camber -1.5° to +3.5° Caster ±1.0°Installation time: 1.8 hr/side Req.: 1 per AxlePart No. 72130 (w/spacers)Front Adjustment Range:

Camber ±2.5° Caster ±1.0°Installation time: .6 hr/side Req.: 1 per Axle

Performance Front Adjustable Control ArmsPart Nos. 73000 (w/shim kit) & 73005Front Adjustment Range:

Camber ±4.0° Caster ±4.0°Installation time: 1.8 hr/side Req.: 1 per Axle

72123 & 73000Infiniti: 2003 - 07 G35 Coupe w/o rear active steer

2003 - 06 G35 SedanNissan: 2003 - 08 350Z

72130 & 73005Infiniti: 2011 - 12 G25

2006 - 07 G35 Coupe w/rear active steer2007 - 08 G35/35x Sedan Incl. active steer2008 - 13 G37 Coupe; 2009 - 13 G37 Sedan2006 - 10 M35/45; 2015 & Up Q4

Nissan: 2009 & Up 370 Z

72050, 72052, 72055Infiniti: 2003 - 07 G35 Coupe w/o rear active steer

2003 - 06 G35 SedanNissan: 2003 - 08 350Z; 2002 & Up Altima

2004 - 14 Maxima

72260, 72262, 72265Infiniti: 2011 - 12 G25

2006 - 07 G35 Coupe w/rear active steer2007 - 08 G35/35x Sedan Incl. active steer2008 - 13 G37 Coupe; 2009 - 13 G37 Sedan2006 - 10 M35/45; 2015 & Up Q4

Nissan: 2009 & Up 370 Z

72050 & 72260

72055 & 72265

72052 & 72262

73000 &73005

72130

72123

To help remove original arm useSPC’s 5” Tie RodPuller #8370

To elongate the toeslots use SPC’s RotaryFile Set #85130

Infiniti:2014 - Up Q50 & Q70; 2012 - 2013 M35h, M37, M56Replacement Arms Below

Infiniti Rear Adjustable 3 Arm SetPart No. 72240 (Inc. 72245, 72250, 72255)Rear Adjustment Range:72240 Camber: ±3.0°/Toe: ±3.0°/Setback: ±1.0° (3 ARM SET) Install Time: 1.0 hr/side72245 Camber: ±3.0° Install Time: .3 hr/side72250 Setback: ±1.0" Install Time: .5 hr/side72255 Toe: ±3.0° Install Time: .3 hr/sideRequired: 1 per wheel

72245 Camber

72255 Toe72250Lateral

Infiniti Rear Replacement Arms (sold individually)Part No. 12020 Part No. 12021 Part No. 12022Rear Lower Control Rear Radius Rod Rear Lateral Arm Arm OE Replacement OE Replacement OE Replacement Mo

re Infiniti a

nd Nissa

n

Alignment Solution

s on

back

Nissan Rear Full Contact ShimsSeries No. 71000Rear Adj. Range: Camber ±1.0° / Toe ±1.0°Installation time: .5 hr/side Req.: 1 per wheel/per angle changed or stack 2 shims




Infiniti RWD/4WD:2005 - 13 QX56; 2014 & Up QX80Nissan RWD/4WD:2004 & Up Armada, Titan; 2005 & Up Frontier, Xterra;2005 - 12 Pathfinder

Nissan RWD/4WD Front Applications:1987 - 95 Pathfinder; 1986 - 97 Pickup

Nissan:25540 2005 & Up Frontier; 2005 - 12 Pathfinder;

2005 & Up Xtera25560 2004 & Up Armada; 2004 & Up Titan

Rear Camber/ToePart No. Change Part No. Change71020 .06° 71023 .38° 71021 .13° 71024 .50° 71022 .25° 71025 .75°

Nissan: 2011 & Up Juke; 2011 & Up Leaf

Nissan Camber/Caster Kit (2)Part No. 87520Front Adj. Range: Camber ±2.0° / Caster ±2.0°Installation time: .3 hr/side Req.: 1 per Wheel

Nissan Front Cam/Cas Shims (6/pkg)Series No. 3508035080 - 1mm • 35081 - 2mm • 35082 - 4mm

Front Adjustable Control Arms (pr)Part No. 25540Front Adj. Range: Camber ±2.0° Caster +1.0° to +3.0°Installation time: .8 hr/side Req.: 1 per AxlePart No. 25560Front Adj. Range: Camber ±3.0° Caster ±3.0°Installation time: .8 hr/side Req.: 1 per Axle

25540

Nissan Mini-Van ShimsSeries No. 71700Rear Adj. Range: Camber ±1.0° / Toe ±.10° to ±.80°Installation time: .5 hr/side Req.: 1 per wheel/per angle changed

Toe CamberPart No. Change Part No. Change Part No. Change71720 ±.10° 71723 ±.40° 71730 ±.25°71721 ±.20° 71724 ±.50° 71731 ±.50°71722 ±.30° 71725 ±.80° 71732 ±.75°

71733 ±1.00° Nissan: 2007 - 12 Sentra

Buy the Set!Part No. 71000 includes 12 shims/2 of each size

25560

Buy the Set!Part No. 71700 includes 20 shims/2 of each size

EZ Shims™

Part Nos. 75200, 75600, 75800Rear Adj. Range: Camber ±1.50°/Toe ±1.50°Installation time: .5 hr/side Req.: 1 per wheel

Nissan:75200 2012 - 15 Versa 75600* 2009 - 14 Cube75400 1993 - 02 Quest 2007 - 11 Versa

*Note - the 75600 must be used with 73415 longer bolts

Nissan 812501994 - 98 200SX1989 - 98 240SX1993 - 01 Altima1985 - 94 Maxima1991 - 94 NX1993 - 02 Quest1983 - 06 Sentra1982 - 92 Stanza

812602007 - 15 Altima2009 - 14 Cube2011 - 15 Juke2011 - 15 Leaf1995 - 15 Maxima2003 - 14 Murano2013 - 15 NV2002013 - 15 Pathfinder

EZ Cams™

Part Nos. 81250, 81260Front Adustment Range:Camber ±1.75°Installation time: .5 hr/side Req.: 1 per axle

2004 - 15 Quest2008 - 15 Rogue2007 - 15 Sentra2007 - 15 Versa

www.specprod.com 1-800-525-6505

©2019 N

iwot Corp. dba Specialty Products Co.

Nis

sa

n T

ru

ck

/SU

V

Need new bolts? Order #21035 for two

replacement bolts

Front Adjustment range:Camber ±2.00° Caster -1.0° to +3.00°Installation time: .8 hr/side Required: 1 per axle APPLICATIONS Nissan: 2005 & Up Frontier; 2005 - 12 Pathfinder; 2005 - 15 Xterra

Restore lost caster, camber and droop travel on your lifted Nissan Titan and Armada to get your drivability back with these adjustable front upper control arms. Use them in combination with Titan OE lowers on Xterras and Pathfinders for a wider stance. This pair of arms feature:

Front Adjustment range: Camber ±3.00° Caster ±3.00°Installation time: .8 hr/side Required: 1 per axle APPLICATIONSNissan: 2004 - 15 Armada; 2004 & Up Titan (Except XD)


25560

Lifted Nissans often run out of factory alignment adjustment when lift kits are installed. Additionally, the OE upper control arm can contact the spring bucket, limiting droop travel and causing unwanted noise, vibration and harshness. These heavy duty replacement arms feature drawn over mandrel (DOM) tubing construction and use our patented adjustable greaseable ball joint (see below) and xAxis™ sealed flex joints, allowing for greatly increased droop travel and easy alignment.

A patented adjustable ball joint design to dial in caster and camber ±3.0° Fully forged steel construction for maximum strength Arm geometry that clears spring bucket for increased droop travel Upgraded greaseable ball joints SpecRide™ bushings with free pivot for extended

travel while maintaining factory standards for noise, vibration, and harshness (NVH)

Front Adjustment range: Camber ±2.00°/Caster ±2.00°Installation time: .5 hr/side Required: 1 per wheel87515 APPLICATIONSNissan: 1998 – 04 Frontier87520 APPLICATIONSNissan: 2004 & Up Armada, Titan; 2005 & Up Frontier 2005 - 15 Xterra; 2005 - 12 Pathfinder

These cams are designed to install in the upper or lower control arms for camber and caster adjustment. They replace the original non-adjustable lower control arm bolts.

87515 & 87520

ZINC CASTER/PINION SHIMSThese heavy-duty axle caster shims can also be used to adjust pinion angle on vehicles with 1-3/4” to 2” wide leaf springs. Note: Shims should not be stacked.

80199-81099 Degree Degree No. Width Taper Qty No. Width Taper Qty 80199 1-3/4 to 2” 1/2° 6 80699 1-3/4 to 2” 3° 6 80299 1-3/4 to 2” 1° 6 80799 1-3/4 to 2” 3-1/2° 680399 1-3/4 to 2” 1-1/2° 6 80899 1-3/4 to 2” 4° 680499 1-3/4 to 2” 2° 6 80999 1-3/4 to 2” 5° 680599 1-3/4 to 2” 2-1/2° 6 81099 1-3/4 to 2” 6° 6

Breakaway

TITAN FRONT UPPER ADJ. ARMS (PR)

NISSAN CAMBER/CASTER KIT (PR)

25540 NISSAN FRONT UPPER ADJ. ARMS (PR)


Six shims per box


1-800-525-6505www.specprod.com ©

2020

Niw

ot C

orp.

dba

Spe

cial

ty P

rodu

cts

Co.®

72610Front/Rear Adjustment range: Camber ±2.00° Required: 1 per axle NOTE: MODELS EQUIPPED WITH HYDRAULIC BUSHINGS MUST BE PRESSED OUT AND REUSED FROM THE ORIGINAL CONTROL ARMS

72630Front Adjustment range: Camber ±1.25° Rear Adjustment range: Setback ±0.5”Required: 1 per wheel

72640 & 75645Rear Adjustment range: 72640 Toe ±3.0° 72645 Factory Toe ±1.0°Required: 72640 One per axle 72645 One per wheel APPLICATIONS (See website for details) Porsche: 1999 - 11 911 (996/997) 1997 - 16 Boxster (987/981/986) 2006 - 12 Cayman (987)

Features Rebuildable ball joint is booted and greaseable Forged 6061-T6 Aluminum construction for maximized

strength at a minimum weight OE sized and style bushings can be replaced with any

aftermarket or OE bushing option Adjusting bolt offers precise camber adjustment Provision for ride height sensor for litronic headlights

PORSCHE TRAILING LINK (PR)Upgrade the front or rear non-adjustable factory trailing arms on your Porsche 996 and 986 with this pair

of fully adjustable arms from SPC Performance. Constructed from forged 6061-T6 aluminum with a hard black anodized finish, they adjust with an easy to reach threaded adjuster and maintain factory ride with SPC’s xAxis™ sealed flex joints which eliminate binding and

bushing compliance. Installed on the front, you will be able to adjust caster ±1.25°. SPC has maintained the OE form so that you will be able to reuse your factory air deflector without modification. Installed on the rear you will be able to adjust set-back ±1/2 inch

(±13mm). Designed for street use as well as the rigors of the track, these arms will let you set your alignment angles where you want them for the way you drive. Sold as pairs.

PORSCHE REAR PERFORMANCE KIT (6)Get the optimum track set-up with SPC’s 6-arm

set. This set includes the 72610, 72630 and 72640 (below). With agressive handling and maximum G’s,

track vehicles require the best adjustment and extra strength vs the OE arm. These aluminum forged arms give you a complete solution for

your track-ready 996/997 or 981/986/987.

72630

PORSCHE REAR TOE LINK (PR) Adjust toe ±3° with this pair of adjustable toe links. SPC’s forged aluminum construction avoids any weight penalty while maintaining factory strength. The integrated ball joint means smooth bind free articulation and no maintenance required. Sold as pairs.

#72645 - Porsche Factory Replacement Toe Cam also availableReplace corroded or damaged OE toe cam bolts on the rear of many late model Porsche vehicles with this replacement cam kit from SPC. Includes one cam.

72600

72613Rebuild Kit for 72610Includes: Ball stud, ball stud nut, race, boot, and press tool.

Benefits ±2° camber adjustment Rebuildable ball jointFast, easy, on-car

adjustment

72640

PORSCHE FRONT OR REAR ADJUSTABLE ARMS (PR)Make the non-adjustable lower control arms on your 996 or

997 Porsche adjustable for up to ±2° camber adjustment. This pair of forged 6061-T6 aluminum arms (2) from SPC will give easy on-the-car

adjustability as well as get you track ready, while maintaining OE Noise Vibration and Harshness (NVH) levels with booted ball joints and high durometer bonded rubber bushings. SPC offers the only greasable and rebuildable ball joint on the market. If you wear out your ball joint race with heavy track use (it happens), get a rebuild kit (#72613) and avoid the cost of a whole new arm. This set can be used for front or rear, so if you want adjustability on all four corners you will need two sets. Sold as pairs.

72610

72120 Spanner Wrench

72645Toe Cam

Toyota Cam KitPart Nos. 25425,25430, 25435, 25440.25455Front Adj. Range:Cam/Cas ±1.5°Install. time: .3 hr/sideRequired: 1 per Wheel

Front AdjustableControl ArmsPart Nos. 25455,25460, 25465, 25470,25480, 25485, 25490Front Adjustment Range:

Camber ±2.0° Caster 0.0° to +4.0°

Install. time: .8 hr/sideRequired: 1 per Axle

25425Toyota 4WD: 1986 - 95 4Runner

1995 Tacoma1986 - 94 Truck; 1993 - 98 T100

25430Toyota RWD: 1998 - 04 Tacoma

PreRunnerToyota 4WD: 1996 - 04 Tacoma Toyota RWD/4WD:

1996 - 02 4Runner

25435Lexus 4WD: 2003 - 09 GXToyota RWD: 2005 & Up Tacoma

PreRunnerToyota 4WD: 2005 & Up TacomaToyota RWD /4WD:

2007 - 09 FJ Cruiser

2003 - 09 4Runner

25440Lexus 4WD: 2010 & Up GXToyota RWD/ 4WD:

2010 - 14 FJ Cruiser

2010 & Up 4Runner25445Toyota RWD/4WD:

2001 - 07 Sequoia1999 - 06 TundraCam Extractor #40915

Toyota Rear Lower ControlArmsPart Nos. 25950, 25955, 25960, 25965Rear Replacement PartInstall Time: 1.0 hr/side Req.: 1 per wheel

25455(Note: Caster Range -1.0° to +3.0°)Lexus 4WD: 1998 - 07 LX470Toyota 4WD: 1998 - 07 Landcruiser 100 25460Toyota RWD: 1998 - 04 Tacoma PreRunnerToyota 4WD: 1995 - 04 Tacoma Toyota RWD/4WD: 1996 - 02 4-Runner25465Lexus 4WD: 2008 & Up LX 570Toyota 4WD: 2008 & Up Landcruiser 200

25470Toyota RWD: 2005 & Up Tacoma PreRunnerToyota 4WD: 2005 & Up Tacoma25480Lexus 4WD: 2003 & Up GXToyota RWD/4WD: 2007 - 14 FJ CRUISER

2003 & Up 4Runner25485Toyota RWD/ 4WD: 2001 - 07 Sequoia

1999 - 06 Tundra25490Toyota RWD/4WD: 2007 & Up Tundra

2008 & Up Sequoia

Patent No. US 7,513,514 B

25950Toyota: 2003 - 14 4Runner

2007 - 14 FJ CruiserLexus: 2003 - 14 GX25955Toyota: 1998 – 07 Landcruiser

(100 Series)

25960Toyota: 1991 – 97 Landcruiser

(80 Series)25655Toyota: 2008 – 15 Landcruiser

(200 Series)Lexus: 2008 – 15 LX 570

Toyota: 2000 - 05 CelicaCelica Forged Rear Camber ArmPart No. 67440Rear Adj. Range: Camber ±3.0°Install. time: .5 hr/side Req.: 1 per Wheel

Scion: 2005 - 10 tCScion tC Rear ArmPart No. 67485Rear Adj. Range: Camber +3.25° (inc. camber change built-in from the factory)Install. time: .5 hr/side Req.: 1 per Wheel

Lexus: 2001 & Up CT; 2010 - 12 HSScion: 2011 & Up tC

Lexus/Scion tC Rear ArmPart No. 67487Rear Adj. Range: Camber +2.0° Install. time: .5 hr/side Req.: 1 per Wheel

Lexus: 2014 & Up IS2013 & Up GS2015 & Up RC

Lexus Rear Camber LinkPart No. 72450Rear Adj. Range: Camber +3.0° Install. time: .5 hr/side Req.: 1 per Wheel

25485

25455

Need front offset bearings for Landcruiser 80 Series?40, 60, 70 Series Monobeam Sleeves?Caster Spacers for front lower arms with stabilzer bushings?

Go Online to get all the Toyota/Lexus/Scionparts available from Specialty Products -www.specprod.com

More To

yota a

nd Le

xus

Alignme

nt Solution

s on

back

Toyota Sienna Rear Cam/Toe ShimsReq.: 1 per wheel/per angle changed or stack 2 shims




67525Lexus: 2001 - 05 IS67530Lexus: 2006 - 11 GS

2006 - 13 IS

Toyota: 2006 - 12 RAV4

Lexus: 1995 - 05 GS2002 - 10 SC

Lexus GS/IS Ball JointPart Nos. 67525, 67530Front Adj. Range: Camber ±1.5°Installation time: .5 hr/side Req.: 1 per Wheel

Toyota RAV4 Rear Adj. Toe ArmPart No. 67805Rear Adj. Range: Toe ±3.0° Installation time: .3 hr/side Req.: 1 per Wheel

Lexus Rear Camber KitPart Nos. 67510, 67515Rear Adj. Range: Camber ±1.0° Installation time: .6 hr/side Req.: 1 per Wheel

Lexus GS Adj. Front Arms (Pr)Part No. 72270Front Adj. Range: Camber ±2.0° Caster ±1.0°Installation time: .6 hr/side Req.: 1 per Ax/e

Series No. 71600Rear Adj. Range: Camber ±.25 and ±.50

Toe ±.10° to ±50°Toe Part No. Change Part No. Change

71621 ±.10° 71624 ±.40°71622 ±.20° 71625 ±.50°71623 ±.30°

Camber Part No. Change Part No. Change71631 ±.25° 71632 ±.50°

Toyota AWD/FWD: 2011 - 14 Sienna

Buy the Set!Part No. 71000 includes 12 shims/2 of each sizePart No. 71600 includes 14 shims/2 of each size

EZ Shims™

Part No. 75600Rear Adj. Range: Camber ±1.50°/Toe ±1.50°Installation time: .5 hr/side Req.: 1 per wheel

Scion:75600 2011 - 15 iQ

2001 - 15 tC2004 - 07 xA2004 - 15 xB2008 - 14 xD

Toyota:75600 2013 - 15 Corolla

2000 - 06 Echo2002 - 13 Matrix2001 - 15 Prius2007 - 11 Yaris

EZ Cams™

Part Nos. 81260,81270, 81280,81290Front Adj. Range:Camber ±1.75°Install. time: .5 hr/sideReq.: 1 per axle

To elongate thetoe slots useSPC’s RotaryFile Set #85130

Patent No. US 7,513,514 B

Lexus:81290 2011 - 16 CT`

1990 - 16 ES2010 - 12 HS1999 - 15 RX

Scion:81260 2004 - 07 xA

2004 - 07 xB81270 2011 - 15 iQ

2008 - 14 xD81290 2005 - 16 tC

2008 - 15 xB

Toyota:81260 2000 - 06 Echo

2000 - 05 MR2 Spyder81270 1986 - 05 Celica

2001 - 09 Prius2012 - 16 Prius C1996 - 05 RAV41987 - 99 Tercel2007 - 16 Yaris

81280 1990 - 16 Corolla

81290 1995 - 16 �Avalon1983 - 16 Camry2001 - 16 Highlander 2003 - 13 Matrix 1990 - 97 Previa2010 - 16 Prius/V2006 - 16 RAV4 1998 - 16 Sienna1992 - 09 Solara2009 - 15 Venza

Series No. 71000 Rear Adj. Range: Camber ±1.0/ Toe ±1.0°Camber/ Part No. Change Part No. ChangeToe 71020 ±.06° 71023 ±.38°

71021 ±.13° 71024 ±.50°71022 ±.25° 71025 ±.75°

Toyota FWD: 1998 - 10 Sienna

71000

71600

67510Lexus: 1998 - 05 GS

2002 - 10 SC67515Lexus: 2001 - 05 IS


www.specprod.com 1-800-525-6505

©2018 N

iwot Corp. dba Specialty Products Co. • Part N

o. 89998 • Rev. 9/2018

To

yo

ta T

ru

ck

/SU

V TOYOTA FRONT UPPER ARMS (PR)

SPC Adjustable Front Upper Control Arms are the industry standard in off-road and racing applications. These arms use a patented design to adjust camber and caster. When you lift or level your truck you can dramatically change the alignment angles. SPC arms will get you back in spec and give you added adjustments to maximize your suspension set-up.

Get more droop travel: Don’t let OE ball joints or mono-ball articulation limit your travel. SPC joints are oversized and provide 80° of travel. Get your drivability and tracking back: Your truck may have started to ‘wander’ after you lifted it. That is because you lost caster. Install SPC arms and get your ‘drivability’ back by putting your alignment in specification. Get your tire where you want it in the wheel well: Are your oversized tires rubbing the fenders or frame rails? SPC Adjustable Arms, in combination with OE adjustments on the lower arm, allow you to dial in alignment specs at the same time that you move the tire forward/outward in the wheel well by up to 1”.

Designed, engineered, tested, and assembled in Colorado, SPC has stepped it up again. • Strongest arm available• Most articulation of any arm, period• The only booted adjustable ball joint on the market• Maintenance free pivoting bushing

Premium Greaseable Ball Joint• 80° of articulation – more than any other ball joint• 25% larger stud cross section vs OE• Greaseable with sealed boot

Isolated xAxis™ Sealed Flex Joint Bushings• Booted to keep

contaminants out• Free pivoting to

eliminate binding• Bonded

Rubber Sleeve To minimize Noise, Vibration, and Harshness (NVH)

Fully Forged Arm• Maximum strength• Maximum clearance• +2 Degrees of Caster built-in

Front Adjustment range: Camber ±2.00° Caster 0.0° to +4.00°Installation time: .8 hr/side Required: 1 per axle

25455 APPLICATIONS (Note: Caster Range -1.0° to +3.0°) Lexus 4WD: 1998 - 07 LX470 Toyota 4WD: 1998 - 07 Land Crusier 100 Series

25460 APPLICATIONS Toyota RWD: 1998 - 04 Tacoma w/6 lug axles Toyota 4WD: 1995 - 04 Tacoma Toyota RWD/4WD: 1996 - 02 4-Runner

25465 APPLICATIONS Lexus 4WD: 2008 & Up LX 570 Toyota 4WD: 2008 & Up Land Crusier 200 Series

25470 APPLICATIONS Toyota RWD: 2005 & Up Tacoma w/6 lug axles Toyota 4WD: 2005 & Up Tacoma

25480 APPLICATIONS Lexus 4WD: 2003 & Up GX Toyota RWD/4WD: 2007 - 14 FJ Cruiser 2003 & Up 4Runner

25485 APPLICATIONSToyota RWD/ 4WD: 2001 - 07 Sequoia 1999 - 06 Tundra

25490 APPLICATIONS Toyota RWD/4WD: 2008 & Up Sequoia 2007 & Up Tundra

Each arm has its own features, go to www.specprod.com for specific details on each application.

SPC OE Monoball

Articulation& Stud CrossSection

68°68°

Sealed

Greaseable

80°

REPLACEMENT AND REBUILD KITS AVAILABLESPC has replacement ball joint and bushing kits available for these arms. Go to our website for more on what is available for your arm/application.

www.specprod.com • 1-800-525-6505

TOYOTA CAM BOLT KIT

This Cam Bolt Kit is a replacement kit for the OE adjusters. The OE bolts on Toyota trucks and SUVs are frequently “frozen” and do not allow for adjustment. Remove the frozen bolt assembly and replace it with an SPC cam kit to get up to ±1.5° camber and caster change. OE adjuster assemblies that are corroded may require SPC’s press tool 40915 for removal, making the job quick and easy.

#40915TOYOTA CAM EXTRACTOR

Use this press tool to remove stuck OE cam sleeves from Toyota trucks. The extended length forcing screw allows you to remove the sleeve without removing the steering rack. Recommend when installing our 25430, 25435, 25440

and 25445 replacement Toyota cams (above).

Front Adjustment range: Cam./Cas. ±1.50° Installation time: .3 hr/side Req.: 1 per wheel#25425 APPLICATIONS Toyota 4WD: 1986 - 95 Runner; Tacoma 1986 - 94 Truck; 1993 - 98 T100#25430 APPLICATIONSToyota RWD: 1998 - 04 Tacoma PreRunner Toyota 4WD: 1996 - 04 Tacoma Toyota RWD/4WD: 1996 - 02 4-Runner#25435 APPLICATIONSToyota RWD: 2005 -15 Tacoma w/6 lug axlesToyota 4WD: 2005 - 15 TacomaToyota RWD /4WD: 2007 - 09 FJ Cruiser; 2003 - 09 4Runner#25440 APPLICATIONSToyota RWD/ 4WD: 2010 - 14 FJ Cruiser; 2010 & Up 4Runner 2016 & Up Tacoma w/6 lug axles#25445 APPLICATIONSToyota RWD/4WD: 2001 - 07 Sequoia; 1999 - 06 Tundra#25450 APPLICATIONSToyota RWD/4WD: 2008 & Up Land Cruiser 200 Series 2008 & Up Sequoia; 2007 & Up Tundra

Rear Replacement PartInstallation time: .3 hr/side Required: 1 per axle#25945 APPLICATIONSToyota: 1996 - 02 4Runner#25950 APPLICATIONS Toyota: 2003 - 17 4Runner 2007 - 14 FJ Cruiser#25955 APPLICATIONSToyota: 1998 – 07 Landcruiser (100 Series)#25960 APPLICATIONSToyota: 1991 – 97 Landcruiser (80 Series)#25965 APPLICATIONSToyota: 2008 - 17 Landcruiser (200 Series)

Front Adj. range: #88915 Cam./Cas. ±1.00° #88920 Caster Only ±3.00°NOTE: Only #88920 includes spacer plates.

Installation time: 1.4 hr/side Required: 1 per wheelAPPLICATIONSToyota: 1991 - 97 Landcruiser (80 Series)

TOYOTA FRONT OFFSET BEARING KITThese offset bearing kits provide either ±1° or ±3° of camber and/or caster change for the non-adjustable Toyota Landcruiser 80 Series and Lexus LX450s with solid front axles. These vehicles are prone to caster loss when lifted, making the ±3° 88920 kit perfect for adding caster to restore “return to center” and improve tracking.

88915

Rear Adj. range: Camber ±3.00°Installation time: .6 hr/sideRequired: 1 per wheelAPPLICATIONSToyota: 2006 & Up RAV4Lexus: 2006 & Up NX 200t 2006 & Up NX 300h

RAV4 ADJUSTABLE CAMBER ARM#67810 RIGHT • #67811 LEFTAdjust rear camber on late model RAV4 and Lexus NX200t with this adjustable rear camber arm. With ±3° of adjustment, this arm will get your vehicle back into factory specification to ensure proper tire wear, handling, and ride quality.

Rear Adj. range: Toe ±3.00°Installation time: . 3 hr/sideRequired: 1 per wheelAPPLICATIONS#67805 - Toyota: 2006 - 10 RAV4#67806 - Toyota: 2006 & Up RAV4

RAV4 REAR ADJUSTABLE TOE ARM #67805, #67806Due to a factory recall for Toyota RAV4’s, much of the third generation of this popular platform no longer has provisions for rear toe adjustment. Replace Toyota’s non-adjustable rear arm with SPC’s adjustable link and get the toe changes needed to avoid premature tire wear. SPC’s R&R rear link provides ±3.0˚ of toe change.

RAV4 CAMBER/ TOE CAM BOLT #25380Replace your OE rear camber or toe adjuster with this replacement cam bolt. OE cam bolts are frequently seized and can’t be adjusted. Remove the coroded bolt assembly and replace it with SPC’s cam bolt to restore the factory ±1.5° camber or toe change. This bolt features a plastic sleeve to eliminate future corrosion.

TOYOTA REAR LOWER CONTROL ARMS (PR)

2594525950

Rear Adj. range: Camber ±1.50°/ Toe ±1.50Installation time: .4 hr/side Required: 1 per wheel/per angle changedAPPLICATIONS Toyota: 2001 - 05 RAV4

25955, 25960, 2596588920

Toyota

This pair of rear lower control arms are direct replacements for weak or bent factory units. Made of 3/16” wall DOM tube, they are more than 2x stronger than the OEM arms! They are equip ped with a rubber bushing in one end for isolation of road noise and an xAxis™ sealed flex joints in the other end for superior flexibility off road.




Rear Adjustment range: Camber -1.5° to +5.0°Installation Time: .5 hr/sideRequired: 1 per wheelAPPLICATIONS Volvo: 2008 - 13 C30 2006 - 13 C70 2004 - 12 S40 2004 - 11 V50

VOLVO FORGED REAR CAMBER ARM These high strength forged rear arms are perfect for tuners or installers that need extended camber ranges on these popular platforms. Complete with OE style bushings installed for a factory type ride.

67420

Rear Adjustment range: Camber ±1.0° Installation time: .5 hr/sideRequired: 1 per axleAPPLICATIONSVolvo: 2008 - 13 C30 2004 - 12 S40, V50

VOLVO REAR CAMBER KIT (PR)This kit replaces the outer bolt of the upper rear control arm and provides ±1° of camber adjustment. Perfect for lowered vehicles or standard alignments.

81310

US Patent Nos. 8,544,861 • 8,469,375 • D783,393China Patent No. 201630012294.X

Other Patents Pending

EZ Cams™ make non-adjustable two bolt struts adjustable up to ±1.75˚ camber change. Head markings show where the cam is for maximum change and an easy-to-manipulate toothed washer lets you set positive or negative change. Simply remove the upper OE bolt, loosen the lower bolt, install and adjust the EZ Cam to the desired change and then tighten everything to specification. This is an easy fix for camber issues and a perfect companion sale for any strut job. Save time, money and effort by making aligning two bolt struts a one man job without grinding. Keep one of each part number in stock, measure the OE threads, replace the OE bolt with SPC’s EZ Cams to make your alignment jobs fast and profitable.

Part No. 81250 (pr) For replacement of 12mm bolts

Part No. 81260 (pr) For replacement of 14mm bolts

NO Special Tools

NO Grinding Necessary

81250, 81260EZ Cam™ XR FOR TWO BOLT STRUTS

US Patent Nos. 8,544,861 • 8,469,375 • D783,393

China Patent No. 201630012294.X

Other Patents Pending

Check camber change before, during and after installation with our 81139 Magnetic Camber Gauge

Front Adjustment range: Camber ±1.75° Installation time: .4 hr/sideRequired: 1 per axleAPPLICATIONS81250Volvo: 1998 - 05 C70 2000 - 03 S40 1998 - 00 S70 1997 - 98 S90 2000 - 03 V40 1998 - 00 V70 1997 - 98 V9081260Volvo: 2001 - 10 S60 1999 - 06 S80 2001 - 07 V70 2001 - 07 XC70 2003 - 15 XC90

VW Rear ShimsSeries No. 71500 Rear Adj. Range: Camber ±.50° to ± 1.0° Toe ±.13° to ±.5° Req.: 1 shim per wheel per angle 71500 Shim Set 16 shims/2 each size and 87350 Wrench



Front Adjustment range: Camber ±1.50° Caster ±1.50°Required: 81353, 81373, 81358, 81378 1 per axle 81352, 81372 1 per wheel - right81351, 81371 1 per wheel - left

81351, 81352, 81353 & 81358* APPLICATIONSVW: 1998 - 05 Passat

81371, 81372, 81373 & 81378* APPLICATIONSVW: 2004-06 Phaeton *NOTE: 81358 and 81378 are performance parts; if OE type noise isolation levels are desired use our 81353 or 81373 arm sets.Pinch Bolts available separately Part #21040

VW FRONT UPPER MULTI LINK ARM SETThis set of adjustable upper control arms will allow ±1.5˚ camber and/or caster change on select VW models. These arms directly replace factory fixed-length arms, allowing easy adjustments after installation. Engineered for both street and track use, maintenance free ball joints

and bushings provide factory ride, handling, and NVH performance.

VW PERFORMANCE ARMSGet ready for the track with this four (4) arm set of adjustable upper links for select VW models. This kit has four arms so you can change camber and caster ±1.5° on both sides. xAxis sealed flex joints replace the overly compliant inner

bushings with a free pivoting minimum compliance joint. You will feel the difference in handling.

Warning: You will also hear the difference, the

OE bushings are designed to absorb and negate noise,

vibration, harshness (NVH). SPC’s performance set of arms will transmit road noise into the cabin.

SPC’s Performance Audi Arms Feature xAxis™ Sealed joint retains grease and excludes contaminants

Highly polished electroless-nickel finish on ball maximizes durability Up to 45° angularity for high mis-alignment requirements

81353AXLE81351 81352LEFT SIDE RIGHT SIDE

81373AXLE81371 81372LEFT SIDE RIGHT SIDE

81358 AXLE

81378 AXLE

VW: 2011 & Up Beetle w/multi link susp. 2009 - 16 CC; 2007 - 13 EOS 2010 - 14 Golf; 2008 Golf R32 2006 & Up GTI; 2005 - 17 GLI 2005 & Up Jetta w/multi link susp. 2006 - 10 Passat; 2006 - 09 Rabbit 2009 & Up TiguanVW Rear Camber Arm

Part No. 81335 Rear Adj. Range: Camber ±3.0° Required: 1 per wheel

VW Front Camber/Caster KitPart No. 81340 Front Adj. Range: Camber ±1.0°/Caster ±1.0°Required: 1 per wheelVW: 1998-10 Beetle; 1999-06 Golf, GTI (A4) 2004 Golf R32; 1999-05 Jetta (A4)

TOE Part No. Change

71520 ±.13° 71521 ±.25° 71522 ±.38° 71523 ±.50°

CAMBER Part No. Change

71530 +.50° 71531 +1.00° 71532 -.50° 71533 -1.00°

NOTE: When installing these shims

we recommended that you use our

VW Shim Wrench (#87530) to assist in removing the rear

hub.

VW: 1998-10 Beetle 1999-06 Golf (Except R32) 1999-06 GTI 1999-05 Jetta (Beam rear axle)

SPC Arms Feature: Forged 6061-T6 Aluminum construction

for maximized strength at a minimum weight

Hooked link to maximize clearances OE style, maintenance free, booted ball

joints Large 18mm threaded adjuster links Replacement pinch bolts

SPC Performance Arms Add: xAxis™ sealed flex joints replacing

overly compliant OE inner bushings with a free pivoting, minimum compliance, joint

©20

20 N

iwot

Cor

p. d

ba S

peci

alty

Pro

duct

s Co

.®

Looking to sell into Dealers and make specific shops? - SPC ...

Documents

Transcript of Looking to sell into Dealers and make specific shops? - SPC ...