LIGHT Duty LIFTs - Apex-Equipments

Professionalism is our PRiNCIPLE

[email protected] +964-750 379 46242

Asymmetric design, electro-hydraulic two post lift with a 4.0 tonne lifting capacity and mechanical latching. Elec-tro-hydraulic two post lifts of the SPOA40 series can be tailored perfectly to fit the application and can be com-bined with up to three different column heights. There are one manual and one electrical controller versions to choose from.

» Fully hydraulic.

» Symmetric design.

» Twin arm operation.

» No lifting ropes or chains.

» Powder coat paint

» 3 stage supporting arms.

» Single point release lock at operations center

Total Capacity 4000 - 4500 kg

Stroke 1957 mm

Overall Height 3865 mm

Overall width 3440 mm

Required ceiling height 3920 mm

Drive through width 2546 mm

Driving power 4.0Kw

Power supply voltage 400 / 50 V/Hz

The energy-efficientelectro-hydraulic design provides for lownoise and economicwork.

Non load bearingcables ensure evenlifting and lowering

The control units(E-model) are equippedwith a 220 V GFIsocket for connectingelectrical equipment.

The mechanical safetylatch integrated on

both columns locks thelift carriage in position

in emergency situations and thus ensures

maximum safety.

LIGHT Duty LIFTs

2-post lifts

[email protected] +964-750 379 46241

ROTARY LIFT

[email protected] +964-750 379 46244

High strength heavy gauge steel columns. Large gussetingon substantial base plate foundations provide the stabilityand support you want for a heavy truck lift.Your shop can start working on work trucks,vans or small buses along with everything else that rolls through the door.

» Raising most light trucks and armored vehicle's

with capacity of ( 5.5 - 6.8 - 8.1 Ton).

» Features symmetrical column design

» Direct-Pull Lifting - high effciency, low maintenance

technology

» Closed hydraulic system

» Powder coat paint

» Padded shut-off bar

» Single point release lock at operations center

Total Capacity 15,000 lbs. (6803 kg)

Rise* 83” (2120mm)

Overall Height 175” (4445mm)

Height to Shut-Off 167-1/4” (4250mm)

Minimum Ceiling Height 176” (4470mm)

Overall Floor Width 154-3/8” (3921mm)

Rise 80-3/4"(2000mm)

Drive Through 108-1/4” (2750mm)

Arm Reach 38” (965mm)61” (1549mm)

Minimum Adapter Height

5-1/2” (139mm)

Voltage* 380v

Amps 20

Stackable Adapter Height(Low Extension)

10-1/2” (266mm)

Time of Full Rise 72 seconds

Minimum Bay Size 15' x 25' (4572 x 7620mm)

DP15DP18

SPO15

2 stage arm

Safety

Heavy Body

Heavy-duty lifts

2-post lift

[email protected] +964-750 379 46243

mahmoud matar

2-post lifts with the engineering, quality and attention to manufacturing detail that can’t be found anywhere else. Today, the industry standard SPOA10 represents nearly 90 years of lift building expertise and decades of 2-post surface lift experience. With true asymmetric rotatedcolumn design, the original “double-s” single piece column and numerous other design advantages, the Original Rotary SPOA10 can’t be beat…by anyone.

» True asymmetrical rotated column design

» Performance tested to 20,000 lift cycles

» Manufactured with nearly 90 years of lift

expertise

» ALI Gold Certified (SPOA10X)

Capacity 10,000 lbs.( 4535 kg )

Rise 78 1/4"

Overall Height 11' 8 1/2"

Overall Width 11' 5 3/8"

Drive-Thru 95 1/4"

Front Arm Min/Max 24"-40 3/4"

Rear Arm Min/Max 40 1/4"-61"

Min. Adapter Height 4 3/4”

Time of Full Rise/De-cent

45 secs./40 secs.

Min. Bay Size 12'x24'

Motor 2 HP

Ceiling Height Min. 12'

Voltage 208v-230v

Mechanical Lock

2 - 3 stage arm

Safety

Adapter Extension Kit 5” - 10” lenght

LIGHT Duty LIFTs

2-post lifts

Cable and pulley system under the runways.All hydraulicscomponents are concealed in this area; and mechanical lifting tucked out of the way for a clean finish howevereasily accessible for inspection when needed. powder coated hammer tone paint finish have a multi-positionlock component Self chocking approach ramps , wheel chocks

» 14,000 lbs. capacity

» Heavy duty hydraulic cylinder

» Internal airline standard

» Single Point latch release system

» One piece formed runway design incorporates

rolling jack channels

» Multiple position latch points in each structural

leg

» Rear wheel slip plates standard

Capacity 14,000 lbs. (6350kg)

Max. Wheelbase 182-1/2" (4635mm)

Rise Mid Step 28 1/16”

Max. Two Wheel Align-ment

166-1/4" (4225mm)

Max. Four Wheel Align-ment

157" (3987.8mm)

Min. Four Wheel Alignment 88" (2235mm)

Rise 80-3/4"(2000mm)

Length Overall 20' 10" (6350mm)

Width Between Platforms 22 3/4"

Width Overall 10' 11-3/4" (3346mm)

Minimum Bay Size 15’ x 25’ (4572 x 7620mm)

Inside Columns 116-1/4" (2953mm)

Width of Runways 20" (508mm)


Full width slip plates allow for four wheel alighment up to 157”

Heavy duty professional Turnplates

Wheel alighment lifts

Wheel Alighment KITRolling Jack7,000 lbs

4-post lift

[email protected] +964-750 379 46246

Versatility: it’s the standard to which Rotary Lift’s four-post lifts are built. These lifts handle cars, vans, trucks - even light and medium duty commercial vehicles with ease. If you service a wide variety of vehicles, Rotary four-post auto lifts are the right choice for maximum productivity.**SM14S (short)***SM14L (standard)****SM14EL (extended length)

» 5” higher rise to 78.75”

» Lowered ramps with polymer rollers

» Powder Coated Hammer Tone paint finish

» Adjustable latch bars

» Single piece non-welded runway with tracks for

rolling jacks

» ALI Gold Certified (SM14-X)

Lifting Capacity 14,000 lbs. (6350 kg)

Rise* 83” (2120mm)

Max Wheelbase* 182" (4623 mm)

Height to Shut-Off 167-1/4” (4250mm)

Rise 78 3/4" (2000 mm)

Overall Floor Width 154-3/8” (3921mm)

Length Overall 20' 10" (6350 mm)

Width Overall 10' 11 3/4"(3346 mm)

Inside of Columns 116 1/4"

Between Front and Rear Columns

195 1/4"(4959 mm)

Height of Columns 7' 6 1/2"

Width of Runways 20" (508 mm)

Width Between Runways 43"-46"


Min. Bay Size 15'x26' (4572 x 7925 mm)

SM14 L

Heavy-duty lifts

4-post lift

[email protected] +964-750 379 46245

[email protected] +964-750 379 46248

Versatility: it’s the standard to which Rotary Lift’s four-post lifts are built. These lifts handle cars, vans, trucks – even light and medium duty commercial vehicles with ease. If you service a wide variety of vehicles, Rotary four-post lifts are the right choice for maximum productivity.

» Cylinder located under the runway

» Dual function Sentinel Lock™ System

» Internal airline

» Adjustable latch bars

» ALI Gold Certifed (SM30N0-X)

Lifting Capacity 30,000 lbs.(13607 kg)

Max. Wheelbase 235" (5969 mm)


Rise 68" ( 1727 mm)

Length Overall 25' 8 1/8" ( 7826 mm )

Width Overall 12' 4 13/16" (3780 mm)

Height of Columns 7' 3/4"

Width of Runways 24" ( 609 mm)

Height of Runways 8 3/8"

Motor 4 HP


Min. Bay Size 16'x30' (4877 x 9144 mm)

Inside of Columns 132" (3353 mm)

SM30

Heavy-duty lifts

4-post lift

[email protected] +964-750 379 46247

Cable and pulley system under the runways.All hydraulicscomponents are concealed in this area; and mechanical lifting tucked out of the way for a clean finish howevereasily accessible for inspection when needed. powder coated hammer tone paint finishhave a multi-positionlock component Self chocking approach ramps , wheel chocks

» Multi-position locks allow runways to be

level at any lock position

» Single point lock release

» Includes steel approach ramps

» Powder coat finish

» ALI/ETL certifed

Capacity 9,000 lbs. (4082kg)

Lifting Height 84" (2133 mm)

Shipping Weight 2,350 lbs (1065 kg)

Power Unit 1HP - (220 Volt Optional)

Overall Length w/Approach Ramps

225-1/2" (5727 mm)

Overall Length w/out Approach Ramps

193-1/8" (4905 mm)

Overall Width w/ Motor 131" (3327 mm)

Clearance betweenRunways

109-1/2”

Runways length 188”

Height of Columns 97"

Runway height 4-3/4”

Runway Width 20”

LIGHT Duty LIFTs

4-post lift

[email protected] +964-750 379 462410

Lifting Capacity 10,000 lbs ( 4500 kg )

Rise high Step/Tall 30 5/16”


Rise Low Step 26 1/16”

Rise Short Pad 23 1/4”

Rise Flat 21 3/4”

Length Overall 90 1/2"

Width Overall 78 1/2"

Width Between Platforms 22 3/4"

Length of Platform 51 1/4"

Length of Pad 17"

Outside Width Of Plat-forms

70 3/4"

Horizontal Movement (during rise)

16"

Collapsed Height 4"

Locking Leg Heights 13 3/8" - 17 3/8" - 21 3/8"

The VLXS10 is your solution for quick service operation on today’s passenger cars and trucks up to 10,000 lbs. Tire and brake work can now be performed on a wider variety of vehicles, thanks to the lift’s pads, adapters, widerdrive-over capability, and increased lifting capacity.

» Driver-over ramps and side rails support wider

vehicles on approach

» Dual lifting cylinders for smooth lifting

» (4) heat resistant pads

» 10,000 lbs. capacity

» (4) 1 1/2” rubber blocks

» (4) three-position adapters

LOW-PROFILE MIDRISE LIFTS

Extension Block Pads

Extension Rubber Pads

[email protected] +964-750 379 46249

Heavy Duty Four Post Lifts Vertical Rise HD Platform Scissor Lift

Mobile Lifting System In Ground Lift - SmartLift

PIT & Scissor Lift Mobile Lifting System For Forklifts

Capacity27,2 Ton

Capacity 40,8 Ton

Capacity65,3 Ton

Capacity5,4 Ton

Capacity4.5 Ton

ROTARY LIFT

[email protected] +964-750 379 462412

SNAP - ONEquipment

[email protected] +964-750 379 462411

The low closed height of a Scissor lift means the lift can be surface mounted, because no recess is required the lift can easily be repositioned or moved in the futureThe hydraulic synchronization system with automatic levelling function prevents uneven lifting or lowering of the load. There are no mechanical connections between the platforms, which provides for perfect workspace ergonomics and maximum freedom of action underneath the vehicle. The low drive over height facilitates the support of vehicles with low ground clearance.

» 3.5 tonne lifting capacity

» Electro-hydraulic operation with self-bleeding

system

» Adjustable platform , Flat design

» No mechanical connection between platformses

standard

Lifting Capacity 3500 kg

Max Rise 1940mm

Lowered Height 105mm

Overall Width 2010mm

Overall Lenght 2160mm

Width Between Platforms 750mm

Platform Lenght 1500mm

Motor 3 Phase , 50/60 Hz , 3KW

Volatge 380v

Time to Full Rise 43s

Double scissorLIFTS

[email protected] +964-750 379 462414

V 3400

wireless Wheel Alignment SystemWierless system provieds installation,usage and mobility option

Track width 48” – 96” / 1220 mm – 2440 mm

Wheel base 79” – 180” / 2010 mm – 4570 mm

Track width 121.9 cm –243.8 cm

Power requirements 230 V 1Ph 50/60 Hz

AC400 48.3 cm – 99.1 cm / 19” – 39”(optional)

AC100 11” – 22”


UL201, C22.2, CE Approved

Wireless system provides flexible installation, usage and mobility options. Patented digital camera tracking auto-matically adjusts to the height of the vehicle.

> SOFTWARE PRO42 PLATINUM> VERSATILE, ACCURATE HARDWARE> SPEED AND PRODUCTIVITY

STANDARD ACCESSORIES

> AC100 Wheel Clamps> Steering Wheel Holder> Remote Control> TIP (Ride Height Target)> Two Wheel Chocks

TECH SPECS

PRODUCT DESCRIPTION

AdvancedDimensioning

EZ-TOE

Help Videos

Automatic VehicleHeight Tracking

Touchless AC400Wheel Clamping

system

VODI™

Touchless AC400Wheel Clamping

system

AlignmentMachine

[email protected] +964-750 379 462413

Mahmoud Matar

V 2100 Tilt

Wheel Alignment SystemProvides Fast , Accurate Real-Time Measurments

New wheel aligner, which incorporates the next generation software and camera technology

Rim diameter 13 - 22

Power supply 230 VAC 1ph 50/60 Hz


Wheel base 200.7 cm – 457.2 cm

Display 22" TFT

Width Between Platforms 750mm

Utilizing advanced imaging technology, the V2100provides accurate, real-time measurements – reducingsetup and measurement times while generating seriousproductivity benefits. Matched with our latest software,the John Bean® V2100 wheel aligner will have yourtechnicians getting readings in a matter of minutes.

> Accurate and repeatable readings in under 2 minutes> Online connectivity for automatic software> Portable remote display> Mainstream alignment features> Tilt, wall and fixed beam options


> AC100 Wheel Clamps> Steering Wheel Holder> Wheel base: 201 – 457 cm (79” – 180”)> Brake Pedal Depressor> Two Wheel Chocks

TECH SPECS

PRODUCT DESCRIPTION

Help Videos

EZ-TOE

All New user intefacew

VODI™

AC100 UNI-VERSAL WHEEL

CLAMPS

AlignmentMachine

[email protected] +964-750 379 462416

T 7800 gThe Tyre Changer of Choice for High Colume Tyre Shops

Inside clamping range 12"-30"

M/D tool technology powerMONT™ - Touch leverless

Clamping System Center post

Tool vertical positioning Pneumatic

Breaking force 11,5 kN


Installed motor power 0,9 kW


The T7800g PROspeed™ , which combines the high productivity features of a tabletop model and the high performances of a leverless tyre changer. With on floor bead breaker, wireless command in the shaft handle and top side bead seater. WDK certified.

TECH SPECS

PRODUCT DESCRIPTION

Powermount™

Control Panel

Dynamic Bead Breaker

On Floor Bea Breaker

APEX QUADRIGA GOLDCar Tyer Changer with Electronically synchronised Dual-Disc Bead Breaker Demounting without Tyre Lever

Rim diameter 12-30

Tower technology Automatic swing arm

Max wheel width 381 mm

Max. Wheel diametre 1200 mm

Breaking force 11,5 kN

Max. torque 1500 Nm

Speed control PROspeed


The semi-automatic tyre changer for car dealerships and tyre shops with medium to high tyre service volume - with electronically synchronised dual-disc bead breaker, automatic mounting tool and centre-clamp system for high productivity WDK certified.

TECH SPECS

PRODUCT DESCRIPTION

Center Clamp

ESDB™

TyreMachine

[email protected] +964-750 379 462415

V 2200 lift

IMAGINING Wheel Alignment SystemHigh-resolution imaging technology delivers speed and accuracy

Rim diameter 11" - 22"


Track width 1219 - 2438 mm


Display 22" TFT

Traditional wheel aligner for general repair shops> Accurate and repeatable readings> Small and lightweight single-plane targets (XD)> Universal wheel clamps> Software Pro42 SILVER> Measurement of toe, camber, caster, maximum steering angle, and toe curve


> AC100 Wheel Clamps> Steering Wheel Holder> Brake Pedal Depressor> Two Wheel Chocks

TECH SPECS

PRODUCT DESCRIPTION

Help Videos

EZ-TOE

VODI™

UNIVERSAL WHEEL CLAMPS

AlignmentMachine

T 8056 rThe Tyre Changer of Choice for High Colume Tyre Shops

For wheels type Road / Agricolture / Construction

Rim diameter with extensions 32" – 56"

Wheel diametre 2350 mmMax wheel weight working position 1500 Kg

Clamping axial orientation horizontal

Demounting tool type Tilting Disk / Tool

Bead braking force 33000 N

Power supply 400 VAC 3ph 50Hz

Designed for use with truck, tractor and OTR wheels of 14” - 56” rim diameter the John Bean T8056R is equipped with a unique bead breaker disc that provides a bead breaking power of up to 33 kN. Also included with this superb machine is a revolving control panel, mounted on a swing arm, that allows for quicker and more comfortable operation.

TECH SPECS

PRODUCT DESCRIPTION

Bead BreakerChuckMounting Clamp

B 9280Motorised Truck Wheel Balancer with Monitor

Rim diameter range 8” - 26”

Lenght of shaft 40 mm

Measuring speed < 100 rpm

Max. wheel diameter 1300 mm

Max. wheel weight 250 kg

Balancing accuracy 1



The semi-automatic tyre changer for car dealerships and tyre shops with medium to high tyre service volume - with electronically synchronised dual-disc bead breaker, automatic mounting tool and centre-clamp system for high productivity WDK certified.

TECH SPECS

PRODUCT DESCRIPTION

Pneumatic Loading Device

ESDB™

TruckMachines

[email protected] +964-750 379 462418

T5345B 2S PLUSPenumatic Tilt-Back Post Tyre Changer with PROSPEED™ Technology

Rim diameter 10"-24"

Tower technology Pneumatic tilt back

Tool vertical positioning Manual

M/D tool technology M/D tool & bead lever

Max. Wheel diametre 1000 mm

Clamping System Turntable & clamping jaws

Jaw type Adjustable - Sliding

Wheel lift Optional

Bead seating- Top-side inflation

yes


The tyre changer for use in general service shops and tyre shops with high tyre service volume - with pneu-matic tilt-back post, 24“ outside clamping capability and PROSpeed™ technology

TECH SPECS

PRODUCT DESCRIPTION

Plus Configuration

PROSPEED™

Bead Break Blade

T 1300 BSwing-Arm Car Tyre Changer

Capability 70 kg

Inner clamping range 12” – 22”

Rim width 3 “– 12”

Max. Wheel diametre 1000mm

Compressed air supply 8 – 12

Weight 173 kg

Speed control PROspeed


The tyre changer for use in general service shops - with swing arm, low footprint and 20“ outside clamping capability

TECH SPECS

PRODUCT DESCRIPTION

Bead Break Blade

Top-Side Bead Seater

Optional Quick-Exchange

Device with Plastic Head

TyreMachine

[email protected] +964-750 379 462417

[email protected] +964-750 379 462420

SMART SONAR™

b 340Car Wheel Balancer with Touch Screen Technology

Rim diameter range 8" - 32"

Motorized Yes

Diametre of shaft 40 mm


Balancing accuracy 1 g

Rim width range 1" - 20"



Start/Stop balance time - Check spin 4.5 s


The wheel balancer for tyre shops, car dealerships and garages with medium tyre service volume. With PROtouch™ - the touch-screen graphical display with DIAMOND user interface – the B340 is as intuitive as a video balancer

TECH SPECS

PRODUCT DESCRIPTION

Stop in Position

SMART SONAR™

B 200 sCar Wheel Balancer with Monitor


Motorized Yes





Max. wheel weight 70 kg


The tyre changer for use in general service shops - with swing arm, low footprint and 20“ outside clamping capability

TECH SPECS

PRODUCT DESCRIPTION

Gague Arm

QUICKBAL™

balanceMachine

[email protected] +964-750 379 462419

Diagnostic Car Wheel Balancer with Touch Screen and 3d Camera Technology


Rim width range 1" - 20"


Wheel clamping Power Clamp

Motorized Yes





Input power (VAC) 230 VAC 1ph 50/60 Hz

The diagnostic wheel balancer for high-end tyre shops, car dealerships and garages , tuning shops and car manufacturers. With 3D camera technology: 5 CCD cameras scan tyre and rim from different directions with special 3D laser stripes. In a single measuring run all data is detected and possible defects in tyre or rim are diagnosed and documented with utmost accuracy.

> Measurement of tyre pull effect (tyre conicity)> Detection of flat spots on the tyre> Detection of possible damage to tyre sidewall> Checking of bead seat> Tilt, wall and fixed beam options> Measurement of radial and lateral run-out of tyre and/or rim> Tread depth measurement in 5 different positions> Tread wear analysis> Graphical user interface PLATINUM> Electro-mechanical Power Clamp> Automatic non-contact acquisition of wheel data and balancing mode


> CLAMPING PLATE Ø 200 MM> CENTRING CONE FOR LIGHT-TRUCK > LOW-TAPER CENTRING COLLETS> UNIVERSAL ADAPTOR SCA> LIGHT TRUCK KIT

TECH SPECS

PRODUCT DESCRIPTION

Platinum InterFace

Easy Weight

Oversize Shaft

Rim Scanner

POWER CLAMP™

3D Imaging Diagnostics

Split Weight Mode

B 2000 P

balanceMachine

[email protected] +964-750 379 462422

VIDEOLINE 204-RPTest lane for cars and vans

Design of mechanics compact

Temperature range (withoutadditional heating system)

0 to +40 °C

Power supply 3/N/PE 400 VAC 50 Hz

Drive-over load / axle 4000 kg

Test weight / axle (70%efficiency – ISO 21069)

1750 kg

Roller coefficient dry/wet > 0.7 / > 0.6

Eusama-based suspension tester Yes

Theta-based suspension tester Yes

Side-slip tester 0 +/– 20 (mm/m)

Test width min. – max. 800 – 2200

The Videoline 204-RP is the optimum test lane forcheck-in, final inspection, tests in line with governmentstandards, and training classes. The vehicle test in thepresence of your customer and the relative print-outmake diagnostics much more trans parent and increaseyour customers‘ confidence.

TECH SPECS

PRODUCT DESCRIPTION

L 401

Brake Lathe Machine

HT 2066

Head Light Adjusting Device

PRODUCT DESCRIPTION

The John Bean® L401 professional combination bench brake lathe is designed to handle all your brake resurfacing needs.

> Provide a fast “One-Cut” finish> Resurface 5” rotors or fly wheel faces, and 9” drum faces> Rotor/Flywheel Diameter Range 5” - 30”> Drum Diameter Range 5” 30”

PRODUCT DESCRIPTION

> Mobile Mechanical Headlight adjusting device with wheel

> Mirror Alighment Sys. > Digital Lux Meter

> Manual Inclination adj.

> RH/LH Traffic adjustment via Selector Switch

ServiceEquipment

[email protected] +964-750 379 462421

KOOLKARE BLIZZARDAir Conditioning Service Equipment

Fully automatic vehicle A/C service equipment with easy-to-understand display and automatic recycling procedure.

PRODUCT DESCRIPTION

Type of refrigerant R134a 8" - 32"

Service Procedure Fully Automatic/manual

Voltage 220-240v 50/60 Hz

Scale Resolution ±10g

Air Purge Automatic air purge

Heated Cylinder Yes

Oil Scale Accuracy ±5g

Vacuum Pump Capacity 100 L/min/0.1 mbar

Recovery/refrigerant 22L refi llable

Pressure gauges 80mm

Vehicle database Yes

Recovery Speed liquid phase 300g/min

TECH SPECS

PDL 4000™ INTERNATIONAL GB

On-Board Diagnostic Tool

The PDL 4000™ International GB had been designed based on latest market requirements to meet the demands of even highly discriminating customers.It pursues the tradition of SUN brand scan tools which all combine user-friendliness with high test coverage and a wide variety of features.

PRODUCT DESCRIPTION

DTI

Diagnostic Thermal Imager

PRODUCT DESCRIPTION

The Diagnostic Thermal Imag-er, with his infrared technology, makes visible the reveal problems on a vehicle.

> Detailed thermal images made up of 4.800 distinct temperature zones

> Exclusive database of guided tests, automotive applications and reference images to help interpret results

ServiceEquipment

[email protected] +964-750 379 462424

1 Direct Injection Solutions

Gasoline direct injection requires high pressuretesting to truly diagnose operation faults. Carbon Zapponce again provides the only complete testingsolution in the market today, with the RevolutionaryGDU.4r, GDU.2r and GD1r Test benches.

1 GD1R

Test bench for 1 Direct InjectorUp to 300Bar HP with 6.5 bar air supplyTest bench for 1 Conventional MPFi or1 Racing application Injector 0-10Bar**Electronic Static, Mass Measurement (DFAP)Resolution: 0.1mm3, Acc: 0.6%FS

Manual or Automatic Operation

Workshop & Expert level of Diagnosis7-8 min testing phase8” Touchscreen HMIUltrasonic cleaning functionVDO/Bosch/Denso Piezo Stack Regeneration functionCGL: VDO Automatic Valve Lift Gap Measurement

Blue Limits Diagnosis

Tests Performed

FeaturesR2LCElectrical test for k/F, /HCFLCheck For Leaks test (injector internal or external)NLTNozzle Leakage Test @High PressureiVM (FL, PL, EM, LL, PI)Injector Volume Measuring test(full-load, part-load, emissions, low-load,pre/post-injection tests and more…)RSPInjector nozzle Response-time testSPRDynamic Spray test performed in all testing conditions

Features

iPSCIlluminated Pressurized spray chamber View of injection pattern up to 1000Bar Visually diagnose NOP, incorrect spraying, leaky / seizedinjectors

RSPSensor adaptable to all nozzles Precise measurement of nozzle reaction time Easily diagnose a slow acting injector, a retarded injectionevent, poor engine performance and emissions issues.

AZO SoftwareAdvanced Android based HMI/PC Wi-Fi printing, sharing, syncing, software/hardware & database updating, via USB or WiFiReal-time Oscilloscope and CSV data export TeamViewer Support and more…

ReportsEasy fail-track color report for each injector. Single-page Quick report or Multi-page Analytic reporting

Gasoline

[email protected] +964-750 379 462423

CARBON ZAPP

[email protected] +964-750 379 462426

Features

> iVM: Injection Volume MeteringPrecise graduated led illuminated tubesare used for efficient diagnosis of uneven flow rates and weak ordefective nozzle springs. Automatic drainage after each test.resolution 1ml, accuracy ±1ml/130ml> iSPC Illuminated Spray Pattern Chamber usedfor visual diagnosis of correct injection> Ultrasonic CleaningBaths Available at sizes up to 120L*featuring:42KHz frequencySweep technology*Degas function*,Controlled Heater and more…

> iRFInjector Reverse Flush Device used to remove all dirt remained insideinjector body after cleaning with the use of Ultrasonics

> eRSOElectrical Resistance, Short Circuit & Open Circuit Test0-10 Bar Testing Capability of All Types of Injectorsup to 10Bars Maximum. GD Units are available for High Pressure DirectInjectors up to 850Bar.

Gasoline

Service & Repair

> Increased exhaust emissions> Reduced engine performance (Power, Torque)> Increased fuel consumption> Poor drive-ability situations> Direct injection systems failure (Leaks, Pressure drop)> Rough idle and periodic stall of the engine> Conditions that lead to long-term catalytic converter damage> Extended engine start-up> MIL - check engine light-up> up to 10Bars Maximum.

Gasoline Injector Teting Fluid

Ultrasonic Cleaning Fluid

Gasoline Soluotion

[email protected] +964-750 379 462425

Back flushAdaptors Ultra Sonic DeviceExtention Rail

Gasoline

1 Fuel Injection Solutions

The efficient, cost-effective andproven workshop solution to bench testand service every gasoline fuel injector.

GS8

Bench for Testing & Ultrasonic Cleaning up to 8 Fuel InjectorsFully Automatic FunctionElectronic PressureControl 0-10BarRacing Injectors Capable*Dynamic & Static iVMAuto-iRF functionInjector Leak Test functionUser-Friendly DesignLanguage Localization

GS4

Bench for Testing & UltrasonicCleaning up to 4 Fuel InjectorsFully Automatic FunctionElectronic PressureControl 0-10BarRacing Injectors Capable*Dynamic & Static iVMAuto-iRF functionInjector Leak Test functionUser-Friendly DesignLanguage Localization

GS2

Bench for Testing & UltrasonicCleaning up to 4 Fuel InjectorsManual FunctionElectronic Pressure Control 0-10BarDynamic & Static iVMManual-iRF functionInjector Leak Test function

[email protected] +964-750 379 462428

DIESEL

DS1R

Test Bench for 1 CRDiUp to 2000Bar HP with 6 bar air supplyElectronic Static Mass, Measurement (DFAP)Resolution: 0.1mm3, Acc: 0.6%FSManual or Automatic OperationWorkshop level of Diagnosis10-15 min testing phase8” Touchscreen HMIVDO/Bosch/Denso Piezo Stack Regener-ation functionCGL: VDO Automatic Valve Lift Gap Mea-surement


DS1R

DS2R-A

Test Bench for 1 CRDiUp to 2000Bar HP @ 6Bar LPAnalog Volumetric /Measurement (VT)Resolution: 0.5ml, Acc: ±1ml/65mlManual OperationWorkshop level of DiagnosisFlushing / Cleaning capability*16 min testing phase /8” Touchscreen HMICapable of EUI/EUP and HEUITesting with optional Attachment unitsVDO/Bosch/Denso PiezoStack Regeneration functionCGL: VDO AutomaticValve Lift Gap Measurement


DSF.4R

Flushing / Servicing benchfor 4 Diesel InjectorsUp to 2000Bar HP with 6 bar air supplySemi-Automatic OperationDiesel Specialist and Workshop levelR2LC and CFL Testing only8” Touchscreen HMIVDO/Bosch/Denso PiezoStack Regeneration functionCGL: VDO AutomaticValve Lift Gap Measurement


2R 4R

[email protected] +964-750 379 462427

Diesel Soluotion

DIESEL

1 CRDi Solutions

Common Rail Revolutionary testing solutionsfor BOSCH, DELPHI, DENSO and VDOHeavy Duty and Light Duty applicationsAll types Piezo, Solenoid & Dual-Solenoid actuators.

CRU.2R

Test Bench for 1 CRDiUp to 2500Bar HP with 6.5 bar air supplyInjector Coding C2i/C3i, IMA/ISA and others**Dynamic ElectronicMass Measurement (BK)Acc: 0.2%FS, repeatability: 0.05%Under 8min testing phaseFully Automatic OperationDiesel Specialist level of DiagnosisFlushing / Cleaning capability*10” Touchscreen HMICapable of EUI/EUP and HEUITesting with optional Attachment unitsVDO/Bosch/Denso PiezoStack Regeneration functionCGL: VDO AutomaticValve Lift Gap Measurement


CRU.4R

Test Bench for 4 CRDi’sUp to 2500Bar HP with 6.5 bar air supplyInjector Coding C2i/C3i, IMA/ISA and others**Dynamic ElectronicMass Measurement (BK)Acc: 0.2%FS, repeatability: 0.05%Under 25min testing phaseFully Automatic OperationDiesel Specialist level of Diagnosis10” Touchscreen HMICapable of EUI/EUP and HEUITesting with optional Attachment unitsVDO/Bosch/Denso PiezoStack Regeneration functionCGL: VDO AutomaticValve Lift Gap Measurement


BK VT DFAPDynamic Electronic Mass Measurement Analog Volumetric Measurement Electronic Static Mass Measurement

[email protected] +964-750 379 462430

Heavy-DutyDiesel

1 HUIR-A

Test & Service Attachmentbench for 1 HEUI DieselInjector up to 300Bar

Semi-Automatic Operation

Under 15min testing phaseAdvanced Workshopand Expert level

1 UIPR-A

Test & Service Attachmentbench for 1 EUI/EUPDiesel Injector

Semi-Automatic Operation

Under 15min testing phaseAdvanced Workshopand Expert level

`

HUIR UIPR

Diesel Specialist Solutions

MTBRCompact Standalone Diesel Test Bench

Technical DataInput frequency 50/60 Hz

Number of phases 3 P/PE

Speed range 0 – 4,000 rpm

Powerful Motor with thermal protection 15HP

Maximum operating ambient temperature 50°C

Base to axis center height 125 mm

High Pressure system Max Pressure 2500 Bar

Supply pump pressure 10 – 800 kPa

Test oil tank 35 L

Waste Oil tank 10 L

Dimensions (W x D x H) 750 x 700 x 1610 mm

CamBox

CRDi / HEUI

CRDi & CRp Function Kits are available for all Makes and TypesA Universal Cambox that fits most Conventional Test Benches in the market (h:125mm).Adapters for all Makes and Types of UIS systems are available

[email protected] +964-750 379 462429

DIESEL

Diesel InjectorCalibration Fluid

Ultrasonic Cleaning Fluid

Diesel Soluotion

Tests Performed

> R2LC Electrical actuator test for k/F, /H> CFL Check For Leaks test (injector internal or external)> NLT Nozzle Leakage Test> LKT Static Back Leak Test> aNOP Automatic Nozzle Opening Pressure test> iVM (FL, PL, EM, LL, PI) Injector Volume Measuring test (full-load, part-load, emissions, low-load, pre/post-injection tests and more…)> iVM-DFI Injector Volume Measuring test (multiple test-points slope per Pressure)> RSP Injector nozzle Response-time test> SPR Dynamic Spray test performed in all testing conditions.

Features

> iPSC Illuminated Pressurized spray chamber View of injection pattern up to 2500Bar Visually diagnose NOP, incorrect spraying, leaky / seized injectors

> RSP Sensor adaptable to all nozzles Precise measurement of nozzle reaction time Easily diagnose a slow acting injector, a retarded injection event, poor engine performance and emissions issues.

> AZO Software Advanced Android based HMI/PC Wi-Fi printing, sharing, syncing, software/hardware & database updating, via USB or WiFi Real-time Oscilloscope and CSV data export TeamViewer Support and more…

> Reports Easy fail-track color report for each injector. Single-page Quick report or Multi-page Analytic reporting

[email protected] +964-750 379 462432

ENGINE SERVICE

Benefits

> Exhaust emissions reduction more than 70%> De-Carbonization of the combustion chamber> De-Carbonizing of Intake Manifold and throttle body> De-Carbonization of the catalytic converter & DPF> Maximum restoration of engine’s performance> Reduction of fuel consumption> Common-Rail system cleaning> High Pressure pump conditioning> Optimum fuel combustion gain> Blocked valves and piston rings release> Improved idle-speed stability> Fading of engine knocking> Prevention of long term expensive repairs

ES.3Diesel & Gasoline Engine Treatment Unit

User-Friendly, On-Display guidewith language localization

AutomaticPressure adjustment

Use of External Tank

Dual-Tank system

Adaptability to all makes andmodels

Portable,Lightweight and Robust unit

Diagnosis

> Incorrect fuel pressure> Incorrect system fuel flow> Plugged fuel filter> Faulty fuel pump> Plugged fuel pump inlet strainer> Faulty fuel pump check valve> Common-Rail system cleaning> Leaky fuel injectors> Incorrect operation of the fuel pressure regulator> Fuel foaming and/or contamination> Restrictions in supply/ return fuel lines> Intake manifold vacuum fluctuation> Exhaust back-pressure for testing DPF & Catalytic Converter> Turbo-boost pressure operation> Adaptability for all Makes, Models and Types

FST / FST-HFDiesel & Gasoline Fuel System TesterUnit

Detergent

The environmental friendly ENGINE TECH Detergent activates the inert carbon molecules, resins, dust

varnish and gums that accumulate inside the engine components, and burns them

with the combustion process.

HP-G2500High Pressure Gauge Common-Rail

New Common Rail Injection SystemsUp to 2500Bar

HP-G250High Pressure Gauge

G-Di Gasoline Fuel SystemsUp to 250Bar

Systems

Common-Railand Conventional DieselsGasoline Direct Injection(G-Di, FSI, HPI, CGI etc.)Conventional Fuel Injection(MPFI / TBI / CIS)LPG and Alternative fuelsCarburated Engines

[email protected] +964-750 379 462431

ENGINE SERVICE

Engine Service Solution

Modern engine servicing,calls for time-saving, easy-to-useand cost-effective solutions.

Diesel & Gasoline Engine Treatment Unit

Engin

e Service Solution

[email protected] +964-750 379 462434

Screw Air Compressor

Technical dataMax. Working

Pressure

ReferenceWorkingPressure

Motor Power Free Air Delivery @reference conditions *

NoiseLevel

**Weight

Model

Bar Bar Kw hp m3/h l/s cfm dB(A)

BaseMounted

270LTank

270LTankDryer

270LTankDryerand

Filters

CSM 7,58 7,5

5,5 7,550,8 14,1 29,9

64 160 207 242 24710 9,5 41,8 11,6 24,6

CSM 108 7,5

7,5 10

68,4 19,0 40,3

65 170 217 250 25510 9,5 59,8 16,6 35,2

13 12,5 46,8 13,0 27,5

CSM 158 7,5

11 15

97,2 27,0 57,2

69 185 232 265 27010 9,5 85,0 23,6 50,0

13 12,5 69,1 19,2 40,7

CSM 208 7,5

15 20

111,6 31,0 65,7

71 200 247 280 28510 9,5 100,8 28,0 59,3

13 12,5 79,9 22,2 47,0* Unit performance measured according to ISO 1217, Annex C, latest edition** Noise level measured according to ISO 2151:2004 using ISO 9614/2

500L Tank mounted variants. Weight = 50kg extra.All Air Outlet Connections = G 3/4 Standard Air Dryer Included

kg

[email protected] +964-750 379 462433

Injector repairtools and Extractors

GV3-352CRAdvanced universal tool to dismount

& mount all type ofnozzle holders [CRDi] of all DI makes

GV3-6601For removing All Makes CRDi’s. Specific for

disassembling very locked injectors in restricted positions [mechanical operation]

GV3-8400Universal kit for All Makes injector removal,

with two distinct procedures

SRA-061CRUniversal Complete Tool kit to disassemble and repair

Common Rail Injectors [Bosch and others]

GV3-2700Universal injector seat cleaner and milling kit.

GV3-6900Complete set for removing all types DENSO

injectors.

SRA-400Lapping tool kit for CR Injector Control Valve

Spherical seat (Is used to recondition the conic seatof the closing valve (CR return valve) positioned

under the CR injector solenoids)

SRA-370Universal Injector Seat (engine cylinder head)cleaning for BOSCH, DELPHI, DENSO, VDO

GV3-6900Complete set for removing all types DENSO

injectors.

SRA-129CR/ SRA-491 / SRA-500 Clamps / Nozzle holder cap wrench /CRDi Solenoid

wrench Dismounting Wrench

DiT-062Diesel injector manual hand pump tester

0-600bars

SRA0313-CELL1SRA0313-CR

Advanced Universal Tool to dismount and mount all types of Diesel Injection Systems

[CRDi,EUI, EUP, PLD and PDE]injectors.

GV3-0260Universal complete set suitable for removing Bosch &Delphi CRDi models: MERCEDES, VOLVO, FORD,

RENAULT, KIA, Trucks and General injectors

[email protected] +964-750 379 462436

Engine AirCompressor

Description Model Vessel Pressure AirDisplacement

Engine

ltr bar psi l/min cfm hp kw Type

engineAIR 7/270 Petrol Stationary 270 14 203 476 17 7,1 5,3 GX240 QX E4

engineAir 8/270 Diesel Stationary 270 14 203 630 22 7,5 5,5 15LD 350

engineAIR 11/270 Diesel Stationary 270 14 203 990 35 10,9 8,2 15LD 440

BI engineAIR 11/270 Diesel 2,2KvA*

Stationary 270 14 203 570 20 10,9 8,2 15LD 440

Petrol and Diesel Engine Driven piston compressorsfor your remote applications

> Dryers

> Spare Parts

> Oil-Free Compressed air

> Desiccant dryersADS

[email protected] +964-750 379 462435

piston Air Compressor

Power CAT AirDisplacement

Dimensions

Description Lt Bar Hp RPM l/min CFM LwB(A) Volt Start WxLxHmm

Weightkg

Pump

BELTAIR PRO 25C2MR / 25C2R 27 10 2 1075 255 9,0 93 1 ph/3 ph DOL 355X805X630 43 NS12S

BELTAIR PRO 50C2MR / 50C2R 50 10 2 1075 255 9,0 93 1 ph/3 ph ** DOL 395x840x710 52 NS12S

BELTAIR PRO 90C2MR / 90C2R* 90 10 2 1075 255 9,0 93 1 ph/3 ph ** DOL 485x970x835 63 NS12S

BELTAIR PRO 50C3MR / 50C3R 50 10 3 1050 393 13,9 93 1 ph/3 ph DOL 410x840x770 55 NS19S

BELTAIR PRO 90C3MR / 90C3R* 90 10 3 1050 393 13,9 93 1 ph/3 ph ** DOL 485x970x890 66 NS19S

BELTAIR PRO 200C3MR /200C3R* 200 10 3 1050 393 13,9 93 1 ph/3 ph ** DOL 560x1400x990 110 NS19S

BELTAIR PRO 200C4R 200 11 4 1400 514 18,2 96 3 ph DOL 560x1400x1010 112 NS29S

BELTAIR PRO 200C5,5R 200 11 5,5 1000 653 23,1 95 3 ph DOL 560x1425x1210 120 NS39

BELTAIR PRO 270C4R /270F4R* 270 11 4 1400 514 18,2 96 3 ph ** DOL 610x1490x1110 120 NS29S

BELTAIR PRO 270C5,5R* 270 11 5,5 1000 653 23,1 95 3 ph DOL 610X1490X1315 127 NS39

BELTAIR PRO 270F5,5R/270F5,5XR 270 11 5,5 1000 653 23,1 95 3 ph ** DOL/YD 500x1490x1190 124 NS39

BELTAIR PRO 500F5,5R/500F5,5XR 500 11 5,5 1000 653 23,1 95 3 ph ** DOL/YD 600x1940x1315 190 NS39

BELTAIR PRO 500F7R/500F7XR 500 11 7,5 1250 827 29,2 N/A 3 ph ** DOL/YD 600x1940x1375 200 NS39

BELTAIR PRO 500F7,5R/500F7,5XR* 500 11 7,5 750 950 33,5 N/A 3 ph ** DOL/YD 600x1940x1375 215 NS59S

BELTAIR PRO 500F10R/500F10XR* 500 11 10 900 1130 9و39 N/A 3 ph ** DOL/YD 600x1940x1375 220 NS59S

BELTAIR PRO 270F4V 400/50 270 V 11 4 1400 514 18,2 96 3 ph DOL 600x680x1740 135 NS29S

BELTAIR PRO 270F5,5V / 270 F5,5XV 270 V 11 5,5 1000 653 23,1 95 3 ph DOL 600x835x1950 150 NS39

BELTAIR PRO 270F7V /270F7XV 270 V 11 7,5 1250 827 29,2 N/A 3 ph DOL/YD 600x940x1985 197 NS39

BELTAIR PRO 270F7,5 / 270 F7,5XV 270 V 11 7,5 750 950 33,5 N/A 3 ph DOL/YD 600x940x1985 212 NS59S

BELTAIR PRO 270F5,5HV 270 V 15 5,5 800 522 18,4 95 3 ph DOL 600x835x1950 180 NS39

BELTAIR PRO 300F4HR 300 15 4 1000 367 13,0 96 3 ph ** DOL 500x1640x995 170 NS29S

BELTAIR PRO 300F5,5HR / 300F5,5HXR 300 15 5,5 800 522 18,4 95 3 ph ** DOL/YD 500x1640x995 185 NS39

BELTAIR PRO 500F7,5HR / 500F7,5HXR 500 15 7,5 600 760 26,8 N/A 3 ph ** DOL/YD 600x1940x1375 245 NS59S

BELTAIR PRO 300F4HR 500 15 10 750 941 33,3 N/A 3 ph ** DOL/YD 600x1940x1375 250 NS59S* 60 Hertz models available / M = monophase • C = mobile • F = fix • V = vertical • S = silent • E = dryer • X = YD star delta starter (+15Kg) • H = 15 bar range1 ph = 230/50/1 • 3 ph = 400/50/3 • ** 230/50/3 voltage also available

Technical data

[email protected] +964-750 379 462438

Flexbimec

Mobile waste oil gravity drainer

Mobile waste oil suctionunit

Mobile, combined waste oil drainer and suction unit

Mobile waste oil gravity drainer equiped with Pump

Pit gravity waste oil drainer

Compressed air treatment unit

Compressed air pressure regulator with manometer

Filter condensate separator & pressure reducer

Mobile suction unit for petrol

Mobile parts cleaner in painted steel

Mobile suction unit for petrol

Mobile pneumatic grease supply kit

Electronic oval gears flow meter for oil

Electronic turbine flow meter for diesel

Low pressure rubber hoses diesel and petrol

blue PVC – hoses with swaged

APEX001 APEX002 APEX003 APEX004




[email protected] +964-750 379 462437

Flexbimec

[email protected] +964-750 379 462440

Flexbimec

Portable oil dispensing unit Automatic rewind, spring-driven hose reel

Automatic, spring – driven hose reel for oil

Wall mounted gun holder

SMobile filtration unit for diesel

Mobile low level gravity waste oil drainer

Mobile low level gravity drainer

Portable, pneumatic tyre inflator with container

Tyre inflating gun with pressure gauge ø 60 mm

Tyre inflating gun with precision pressure gauge ø 80 mm Air blow gun Chemicals sprayer

Multi-purpose drain pan Oil absorbent roll Oil absorbent mat pads Rilsan® spiral hose





[email protected] +964-750 379 462439

Flexbimec

Pneumatic pumps of low viscosity oils and antifreeze

Pneumatic pumps for supply medium and high viscosity oils Pneumatic Piston Oil Pumps Air operated grease pump

Electric Diesel Pumps Diesel transfer kit, mounted on wall bracket

Encased diesel supply unit with electric pump Diesel transfer kit

Waste oil suction units wall mounted

Pneumatic pumps for the dispensing of grease

Heavy Mobile pneumatic oil dispensing kit

Mobile pneumatic oil dispensing kit

Trolley with 2 wheels and two castors for drums Mobile oil dispensing unit Pneumatic brake bleeding

unitMobile, electric brake

bleeding unit





[email protected] +964-750 379 462442

Flexbimec

Oil System with 12 despansing unit and 6 type of oil Electronic oval-gears flow meter with pulse transmitter

Service Columns And Service Stands

APEX064 APEX065

APEX066

[email protected] +964-750 379 462441

Flexbimec

Wall-mounted chamois leather wringer Lever action grease gun Lever action grease gun with

flexible outlet hoseOIL TEST

Sample recovery pump

Oil syringe Pump action oiler Digital oval gears grease flow meter

Manual Pumps For Oil And Diesel

Mounting shelf Spill containment pallet in painted steel

Mobile version of drum lift ERCOLINO 250 Empty drums for oil

Oil Supply Station Oil absorbent mat pads Stationary electric oil dispensing kit




APEX061 APEX062 APEX063

Automatic TransmissionFluid Exchanger

APEX064

[email protected] +964-750 379 462444

GARAGE EQUIPMENT

Hydraulic trolley jack capacity on the plateton 10 - 5 - 3 - 2 - 1.5

Low profile rangeHydraulic trolley jack ton 4 - 2

Special hydraulic crane to extract differential gears of motorlorries with desmontable arms to make easy the carrying 350 kg

Hydraulic pallet truck capacity ton 2Hydraulic Lifting Table

Hydraulic bottle jack capacity ton from 50 - 0.40 Export range with overload valveHydraulic trolley jack Capacity from 1.5 to 4 ton

APEX073 APEX074

APEX075 APEX076

APEX077 APEX078

[email protected] +964-750 379 462443

GARAGE EQUIPMENT

Hydraulic pit jack for heavy trucksTransmission jack capacity ton. 15

One piston and two pistons rangeTransmission jack capacity ton. 0.3 - 0.6 - 1

Pneumatic trolley jack TON 60 -30 -20 Supporting stand for car and trucks.Extension with pin holes and thrust bearin

Hydraulic trolley cranes capacity kg. 2000 - 1000 - 500 Hydraulic presses Ton 50 - 30 - 20

APEX067 APEX068

APEX069 APEX070

APEX071 APEX072

[email protected] +964-750 379 462446

Battery Booster

P2 START TRUCK ® 12/24V. / 3100

* Model: P2 START TRUCK 12/24V / 3100* Peak Amps: 6200/3100* Charger: 24V 4A* Parameters; Input Voltage: 230-240V* Frequency: 50 HZ* Exciting current with no load: 50mA Max* Exciting current with full load: 90mA Max* Output voltage DC: 24.0* Output current: 2000 mA* Output voltage No load DC: 14.6-15.0

Start Booster P16 12V / 3100

* Model: P16 START BOOSTER 12V / 3100* Peak Amps: 3100* Charger: 12V 1.5A* Parameters; Input Voltage: 230-240V* Frequency: 50 HZ* Exciting current with no load: 50mA Max* Exciting current with full load: 90mA Max* Output voltage DC: 12.0/25.0A* Output current: 1170A* Output voltage No load DC: 14.9V

PRO-CAP BATTERY-LESS START BOOSTER ® C10 12V. / 1800

* Body weight: 4,2kg.* Maximum cranking rate: 8000AMP.* Short circuit current: 3500AMP.* Capacity: 300F.* Operating temperature: -40° / +50°* Charging voltage: DC 12V. & AC 220V. / 50Hz.* Ratd Voltage: 15V.* Charging time with battery: 2 min. max.* Charging time with charger: 5 hours max.* Lifespan: 1,000,000 cycles* Safety features: Safety fuse

[email protected] +964-750 379 462445

Lemania energy

[email protected] +964-750 379 462448

Tools

Top Quality Tools

[email protected] +964-750 379 462447

Battery Booster

Start Booster P8 12V / 2500 Hybrid H2 TR – 12V/24V / 3100 P7 Start Truck 24/12 2500

Battery Tester & Electrical System Analyzer

Our best achievements in terms of technology all reduced into the greatest testers available

on the market so far

Flash Chargers 100 / 70 / 50 A

Inverter energy efficient battery chargeris a new kind of advanced pulse battery charger

Smart Charger LEM

12V/24V Compatibility, Memory Function, Fully Interactive, MCU controlled program, Fast Charging Technology,Power Factor Correction, Complete Protection, All Types of Battery, Abnormally protection, Recovery ModeExtend-able Connectors, Cold/AGM Mode.

[email protected] +964-750 379 462450

spanner-socketextensions

Impact Sockets 12 Point Deep Sockets Spanners

Double Open SpannerFlare Nut SpannerRing Spanner

Ring Slugging Spanner Hinged Socket Wrench Angle Wrench

Wheel Sockets Big Sockets Spark Plug Sockets

Extensions Universal JointAdaptors

[email protected] +964-750 379 462449

ScrewDrivers

VDE/Electrical

Phillips Head Screwdrivers Slotted Screwdrivers

TX Screwdriver Flexible Hex Nut Screwdriver

Hex ball long key set L-Handle Ball Ended Hexagon Key

Long Screwdrivers

Hex Key Set Folding Hex Key Set Folding Star Key Set Folding

Hook Set

TX Screwdrivers Ratchet Screwdrivers

PH FLAT

HEXTX

L-Handel

TP/TX

HEX

[email protected] +964-750 379 462452

Impact Wrench (3/8”) Impact Wrench (1”) Impact Wrench long nose

(1/2”) Impact Wrench Battery`(3/4”) Impact Wrench

Air Drill (1/4”) Air Ratchet (3/8”) Air Ratchet

Air Regulator & Lubricator Air Saw

Air belt sanderMini Air GrinderAir Die Grinder

Pneumatic tools

1/2”

1”1/2” 3/4”

1” 3/4”

1/4” 3/8”

(1”) Impact Wrench

(1/2”) Air Ratchet

1/2”

[email protected] +964-750 379 462451

Torque limiter

Torques Wrench Up-to 400 N.M

Torques Wrench up-to 2000 N.M

Screwdriver Torques Torques Multipliers

Electronic accuracy tester for torque wrenches Uni torque converter

Precision Torque

Swivel handle Flexibel Head Reversible ratchet Ratchet Brake line spanner

Reamer for ABS sensor with bendable ratchet

Ratchet Handle Extendibles Ratchet

TORQUES-Ratchets

1”Drive1/4” 3/8” 1/2” 3/4”

1/4” 3/8” 1/2” 3/4”

Torque Angle gauge

1/4”

3/8”

1/2”

Gear-plus Ratchet Ratchet

[email protected] +964-750 379 462454

Cast iron handle pipe wrench Pipe wrench 45° angled, 2” Swed Pattern Pipe Wrench Angeld 45

CLASSIC adjustable wrenchMulti function spanner

Adjustable Wrench Adjustable Hook Spanner Wrench Box-Joint Water Pump Pliers

Mini Bender Gripper Straight with claw

Oil filter wrenchChain WrenchSuper Heavy duty hacksaw

Stillson pipe wrench

Pulley Removing Wrench

Pliers

[email protected] +964-750 379 462453

Pliers

Circlip pliers Curved jaw locking pliers Long nose locking pliers

Stripping pliersTower pincer

Combination pliers Hose clip pliers Hose clamp pliers

Welder`s grip pliers Wheel weight balance pliers

Long nose plierDot Locking C clamp pliersSheet metal grip pliers

Pliers

Multi-grip pliers Straight jaw

[email protected] +964-750 379 462456

Shrinking Dolly Toe Dolly Thin Toe Dolly

Curved DollyUtility Dolly

Anvil Dolly Curved Dolly Large End Dolly

Heel Dolly Light Dinging Spoon

Drip Moulding SpoonFlat SpoonFlat Spoon

Grid Dolly

Anvil Dolly

Body-Work dollys

[email protected] +964-750 379 462455

Stoning Hammer 1000 GrFibre Handle TPR Cover Sand filled hammer 400gr Machinist hammer

Sledge hammerBlack Rubber

Body hammer small,rounded,round/square Bumping hammer coarse,flat,round/square Bumping hammer

pick hammer,curved (round flat/pointed) Machinist hammer 400gr fiber handle TPR cover

Dome DollyDouble End Hand DollyDouble End Round Dolly

Install hammer soft/hard

Pick hammer straight round flat/pointed

Hammers

[email protected] +964-750 379 462458

Measurement Tools

Tire profile gauge Stainless steel vernier caliper for disc brakes Measuring tape

Digital Vernier CaliperScrew Pitch gauge

AnalogDail gauge Magnetic Dial gauge stand Paint Thickness Measuring instrument

V Block Micrometer

Belt Tension gaugeAdBlue refractometerDigital Vernier Caliper & Tire Profile gauge.

Feeler Gauge

Digital Laser Tachometer

[email protected] +964-750 379 462457

Cable Reel 15m Multimeter AC/DC Volt circuit tester

Rechargeable adjustable rotary work lightMulti-function Jump starter 6000mAh

Terminal release tool Automatic wire stripper Crimping Plier

Electronic Surge Protection Precision tool

Flash LightUnder-hood Lamp with cableLight Cable Reel with Iron Case 230 v ,15m

Volt circuit tester 6-24V

VDE Screwdriver

Electric Tools

[email protected] +964-750 379 462460

Petrol engine compression test Oil pressure test Deluxe compression tester kit 2mpa

Transmission / engine oil pressure kit Cylinder leakage tester kit

Master compression test Fuel injection cleaner Diesel Compression tester

Pressure Test Pump Refrigerant Leak Detector

Thermometer UV Leak Detection KitRadiator pressure test

Engine & A/C tester

[email protected] +964-750 379 462459

Spring Compressor 2250 kg Spring Compressor 1500 kg Spring Compressor Stand 1000 kg

Car brake spring pliersValve spring compressor

3 - legs bearing puller Gear and Pulley Puller Reversible puller 3 - Jaw

2 - arm Puller 2- Long Arm Puller

Universal 2 - arm pullerSlide hammer puller set

Towing bar With Spring Damper

Ball joint separator

Spring Compressorpullers

[email protected] +964-750 379 462462

HNBR O-rings Toothed and standard washers Spring washers

Copper washersWashers , plumbing

Nitrile coated glove Crimping Tool Set Circlip Assortment

Electrical Terminal Car Fuse Kit

Anchors BoltsShrink-on tubesLetter and Number Punch

Oil sump drain plug and washer

Rubber O ring

ASSORTMENT & CONSUMABLE

[email protected] +964-750 379 462461

Adapter Brake piston spindle Brake lining wear indicator Pneumatic brake fluid bleeder

Brake bleeding spannerBrake Pipe Corrosion Tool

Brake piston tool Fuel line Stopper Wheel hub grinding disc

Pry Bar Tyre Valve driver

Release lever for the disassemblyVacuum pump setBrake caliper set

Brake Fluid Tester Digital

Indexable ratcheting pry bar

Brake & tyreService

[email protected] +964-750 379 462464

Combination Sets Safety Tools Tool Boxs

Mechanic’s chair (Creeper)Tool Suitcase

Magnetic Tray Spirit Level Piston Ring Compressor

Thread Repair Staright Edge

Twist drill bit setFile SetWire Brush

Glass fiber Chisel

Valve Grinder

TOOLS

[email protected] +964-750 379 462463

Car Airbag Simulator

Picoscope Automotive 4-Channel Advanced Kit

Wireless Chassis Ear Diagnostic ULTIMATEvision SUPERCHARGED Videos-cope

1000V CAT III HYBRID multimeter

Automatic Information Terminal. Senzit Smart Air Filter Monitor Remote Tester Key Frequency/Infrared

Remote Programming Kits,

Crash Data Retrieval DLC Base Kit

Automotiveinstruments

Mechanical Stethoscope

Voltage Tester for Hybrid Car

Tire Profiles Groove Glove

scanner

PICO Sensor ,Pressure Transducer ,Noise, Vibration and Harness Diagnostics.

[email protected] +964-750 379 462466

Tool trolley

Socket and Screwdriver Set 1/4”, 121-PCS - MEDIUM Combo Set 3/8” 1/2”, 101-PCS - MEDIUM

Chisel, Hammer, Pliers, File Set, 23-PCS - MEDIUM

Empty S8 Toolbox, 7 Drawers (Black)

18”301/2 “

401/2 “

CENTRAIZEDKEYED LOCK

SAFETY LATCHIN HANDLEBALL BEARING

DRAWER SLIDES

LOCKINGCASTER

ANTI-TILTSYSTEM

CAN HOLDER

PC

S285

Wrench Set, 40-PCS - MEDIUM

WORKTOP MADE FROM EVA

Can Holder

SAFETY DRAWERS RELEASE SYSTEM

4X EXTRA LARGE WHEELS 125MM

FRONT CENTRALISED SAFETY LOCK

NEVER OPEN MORE THAN 1 DRAWER EACH TIME,

TO PREVENT TIPPING OVER!

[email protected] +964-750 379 462465

Tool trolley

735MM 467MM

911M

M

735

911

467

FOLDING KEYWork-Top4 Wheels Ø 100MM

Safety Lock

Can Holder

Ball BearingSlides

Screwdriver and Wrench Combo Set 1/4’’, 61-PCS - MEDIUM Combo Socket Set 3/8” & 1/2”, 65-PCS - MEDIUM Pliers, Chisel, & Hammer Set, 14-PCS

Filled tool trolley S7 140pcs SFS (Black)

Empty S8 Toolbox, 7 Drawers (Black)

Safety DrawersRealease System

4X Extra Large Wheels 125MM

Work-Top MadeFrom EVA

18”301/2 “

401/2 “


SAFETY LATCHIN HANDLE

BALL BEARINGDRAWER SLIDES

LOCKINGCASTER

ANTI-TILTSYSTEMCAN HOLDER

PC

S140

[email protected] +964-750 379 462468

Chisel, hammer, pliers & file set, SFS 23-pcs Screwdriver set, SFS 24-pcs

Socket set (SAE) 12pt. 1/4 3/8 1/2 SFS 93-pcs

Filled tool trolley S9 (SAE) 171pcs SFS

333/4“

403/4 “


SAFETY LATCHIN HANDLEBALL BEARING

DRAWER SLIDES

LOCKINGCASTER

ANTI-TILTSYSTEM

CAN HOLDER

PC

S171

Wrench set (SAE) SFS, 31-pcs

STAINLESS STEEL TOPBLADE

FOLDING KEY

203/4 “

SAETool trolley

HANDLE FRONT CENTRALIZED SAFETY LOCK

INCLUDING PAPER ROLL HOLDER

4X EXTRA LARGE WHEELS 125MM

CAN HOLDER FULLY 100% RETRACTABLE DRAWERS

SAFETY DRAWER BLOCKING SYSTEM

[email protected] +964-750 379 462467

Tool trolley

Filled tool trolley SFS 1/3 S9 539pcs

PC

S539

Reversible ratchet & open wrench set SFS 1/3 19-pcs

Oil filter set SFS 1/322-pcs

Wrench set SFS 1/330-pcs

Impact deep socket set 1/2 SFS 1/3 16-pcs

Accessory set 1/2SFS 1/3 9-pcs

Bit socket set 3/8 SFS 1/3 80-pcs

Bit socket set 3/8 SFS 1/3 30-pcs

Combination set 3/8 SFS 1/3 14-pcs

Bit socket set 1/4SFS 1/3 102-pcs

Screwdriver, TX set SFS 1/3, 8-pcs

Deep socket set 1/2SFS 1/3 20-pcs


Socket & socketbit set 1/2, SFS 1/3 22-pcs


Hammer set SFS 1/3 3-pcs

File set SFS 1/3, 6-pcs

Pliers & tools set SFS 1/3, 7-pcs

Combination wrench set SFS 1/3, 19-pcs

Gripped chisel & punch set SFS 1/3, 12-pcs

Wrench set SFS 1/312-pcs

Pliers set SFS 1/38-pcs

Screwdriver set SFS 1/38-pcs

Hook set SFS 1/3 8-pcs

BALL BEARINGDRAWER SLIDES

LOCKINGCASTER

ANTI-TILTSYSTEM

CAN HOLDER

SAFETY LATCHIN HANDLE

[email protected] +964-750 379 462470

Filled tool trolley S15 958pcs SFS

663/4“

453/4 “

PC

S958

28 “

Tool trolley

Bit socket set 1/2 SFS 64-pcs

Screwdriver set, SFS 18-pcs

Impact socket set 1/2, SFS 39-pcs

Socket screwdriver, Hex & grips key set, SFS 18-pcs

Combinatination set 3/8 SFS 218pcs

Hex ball grip key set, SFS 18-pcs

Combination set SFS 169-pcs

Combination set 1/2 SFS 149pcs

[email protected] +964-750 379 462469

Screwdriver and 1/4 Bit socket set, SFS 146-pcs

Filled tool trolley S14 644pcs SFS (Black)

571/2“

433/4 “

PC

S644

253/4 “

JUMBO Tool trolley

Socket set 3/8 SFS 164-pcs Socket set 1/2 SFS 118-pcs Pliers and cutting set, SFS 26-pcs

Hex nut and key grip set, SFS 27-pcs Chisel, hammer and Impact set, SFS 40-pcs Wrench set, SFS 53-pcs Wrench set, SFS 69-pcs

[email protected] +964-750 379 462472

Heavy Jack stands

5 Drawer Workbench

5 Drawer WorkbenchCreate the ultimate work space with the MSS modular storage systems.Keep your work space organized to maximize your work flow and productivity!

Multi drawer steel cabinet

Heavy Trolley Service Jack 2 Tonne Trolley Jack Bench Grinder

Service cart

Steel Vice Bench

BENCHES & STANDS

Light Jack stands

Bench Mounted Drill Press Drill Stand

2000mm workbench with base cabinet and drawer module. 2mm thick worktop in epoxy painted sturdy steel 3mm thick top cover in scratch-proof ABS -2 steel bars under the worktop

for maximum strength 1000mm base cabinet with slide-in door, adjustable shelf and keylocking system 4 full-extension cabinets with central keylocking system Adjustable feet

included Work table height 920mm Depth 700mm

Dimensions (LDH)

426 x 642 x 190 MM

Dimensions (LDH)

1200x600x850 mm

Dimensions (LDH)

1700x600x850 mm

MSS 2803mm setup with stainless steel top blade

[email protected] +964-750 379 462471

PC

S958

Tool trolley

Screwdriver set SFS, 45-pcsUtility tools set, SFS 44-pcsPliers & cutting set (9 Germany) SFS, 34-pcs

Wrench set SFS, 72-pcs

Chisel & hammer set, SFS 20-pcs

Wrench set, SFS 50-pcs

»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»

[email protected] +964-750 379 462474

Aluminum Cylinder

Hydraulic bolting systems are torque and tension machines. Hydraulic bolting systems are torque and tension machines.

Air powered products is the simple solution for industrial maintenance. Pumps are available in many configurations to give you the right power.

Hydraulic Nut Splitter Hydraulic Flange Spreader and Lifting Wedge

Manual Torque Multiplier

High strength and impact resistant hex and Allen sockets Standard and customized solutions for every type Telescopic Low Height Cylinder

Pancake Lock Nut Cylinder

Mechanical Jack Hollow Plunger Cylinder

OIL & GAS

Portable Battery Gun

Automatic Vehicle Hydraulic Puller Filter/Regulator/Lubricator Unit

TTL TTZTTS TTX

PUMPSSingle-Speed Torque Gun

Dual-Speed Torque Gun

[email protected] +964-750 379 462473

Jaw opening

Beryllium G clamp Bronze plus Non-sparking locking pliers

Bronze plus ball pin hammer Bronze plus Pipe cutter

Bronze plus Double open ended spanner Bronze plus slogging ring spanner

Bronze plus Flange spreader

Beryllium plus Scissors Bronze plus Universal wrench Beryllium plus adjustable spanner

Bronze plus Portable hand operated oil pump

Beryllium plus file

Beryllium plus adjustable pipe wrench

non-SparkingTools

Jaw opening

Bronze plus chain hoist

Bronze plus Forklift

[email protected] +964-750 379 462476

A/C Machines

AC 690 PRO

Automatic air conditioning service unit for R-134a

* Single service process selectable* Deep vacuum (Vacuum pump 170 l/min)* OIL/UV dye injection bottles* Large internal tank (20 kg)* Messages on display guide the operators step by step* Integrated database for car, truck and commercial vehicle* Charge with automatic compensation of service hoses* Integrated flushing program with optional kit* Multi-phase refrigerant recycling during vacuum phase* Integrated, guided performance test for A/C system* Automatic purge of non condensible gas* Easy internal filter maintenance* Accessible vacuum pump for easy oil change* Printer

AC 1234-7

Automatic air conditioning service unit for R-1234YF

* Fully-automatic - no manually operated valves* Powerful compressor with a capacity of 500 g/min* Professional refrigerant management with evaluation of recovery and charge* Integrated printer for detailed reports* Deep Recovery Function* The intelligent electronic control of refrigerant weight, pressure and temperature guarantees a minimum of refrigerant waste at the service process.* The unit complies with SAE J2843 Standard* Maximum accuracy during recovery and flushing is based on +/- 15 gram* M95% of the refrigerant is evacuated from vehicle and hoses* Double-stage vacuum pump with delivery volume of 170 l/min* Integrated flushing program combined with optional flushing kit.* Automatic UV dye injection

[email protected] +964-750 379 462475

Specification

Min-Max drum turning diameter 150÷1170 mm

Max disc turning diameter 865 mm

Longitudinal table travel 410 mm

Cross slide travel 145 mm

Spindle rotation speed 30÷120 rpm

Longitudinal table feed 0÷30 mm/min

Cross slide feed (option) 0÷30 mm/min

Spindle motor power 1.5 kW

Dimensions (LxWxH) 1970x1400x1470 mm

Weight 655 kg

lathe skimming machines

Base cabinet

Lathe Machine ( light Vehicle )

On-the-car disc lathe CNC Machiens

Adapter set for heavy duty discs and drums

Insert tool holder 12V D.C. Power box (to power TD )` small disc & drum adapter set arbor

Light disc and drum centering adapter set

Right and left hand L shaped insert tool holderAdapter plates for hubless

brake drums

wheel turning kit with large safety guard Cutting tips

Lathe Machine ( Trucks )

Specification

Working stroke 90mm

Rotor thickness 5÷40 mm

Feed rate 15 mm/min

Feed motor 12 V

Weight 8,5 kg

Disc rotation speed 95 rpm

Motor driving unit 0,5 Hp (0,37 kW)

Weight 42 kg

Specification

Min-Max drum capacity 150÷710 mm

Max drum depth 210 mm

Max disc diameter 860 mm

Max disc depth 150 mm

Max disc thickness 60 mm

Spindle rotation speed 70-100-145 rpm

Variable table feed speed 0÷27 mm/min

Spindle motor 0,75 kW

Dimensions (LxWxH) 840x505x510 mm

Weight 205 kg

[email protected] +964-750 379 462478

WORKY

[email protected] +964-750 379 462477

A/C Machines

AC 788 PRO

Automatic air conditioning service unit for R-134a

Contaminated Refrigerant Recovery Machine UV Leak Detection Kit

SERVICE COUPLER SET (1234YF) SERVICE COUPLER SET (134-a)Flushing Kit for single components of

A/C system.

* TFT 1/4 VGA Display* Large 80mm class 1 gauges - clear and accurate* Manual/automatic, beginner/expert modes* Built-in printer to aid up-selling and record keeping* Internal temperature sensor with 4m cable* Integrated diagnostic function - identifies faults and fixes* Automatic vacuum leak test facility* Automatic oil drain* Automatic refrigerant recycling* Automatic scale - controlled oil injection for both* Recovery auto-restart,* Flush-prepared capability* ASA interface for data exchange* User-editable database for vehicle profiles and records

[email protected] +964-750 379 462480

WORKY

Complete kit for dry sanding dust extraction and filtration composed by the mobile unit DMOB2 connected to the 6 mt long articulated arm equipped with service unit for energy distribution and dust extraction.

High Pressure centrifugal fan

Structure for fluid and energy distribution with support for 2 exhaust extraction hose reels. It can welcome up to 10 reels for fluids 15mt long.Prepared for cabinets on demand.

Enclosed Gantry

Energy Distribution Box

Dry sanding dust extraction and filtration unit. Equipped with side channel blower with inverter,dust bin with removable bag,cartridge filter with automatic cleaning sytem.

Palletized container in polypropylene copolymerresistant to acids for storage of exhausted beatingThe cover and the 4 wheels are available as an option for easy movement.

[email protected] +964-750 379 462479

EXTRACTION SYSTEM

3D Layout

Complete kits with Rail,Fan,Three Sliding Reels with hose 7,5m long.To be completed with hanging Brackets,Nozzles and chimney.

Aluminum track with rubber

Complete kits with rail, fan, one sliding GTL touchless arm. To be completed with hanging brackets and chimney.

Hose Reel

Automatic start / stop

Complete kit for test line with rail, fan, one carriage with hose 7,5m, nozzle and balancer. To be completed with hanging brackets and chimney.

Complete kits with rail, fan, three carriages with hose 7,5m. To be completed with hanging brackets, nozzles and chimney.

[email protected] +964-750 379 462482

spray-booths

THE LEADER IN SPRAY BOOTH APPLICATIONS

[email protected] +964-750 379 462481

WORKY

Miniset with fan, hoses, wall brackets and GRNrubber nozzles.

Spring recoil hose reel complete with fan, flexible hose and stopper fixed on column

Rail with one Drop

Dry sanding dust Extraction and Filtration

Heavy Duty work bench with drawer.

Palletized container in polypropylene copolymerresistant to acids for storage of exhausted beatingThe cover and the 4 wheels are available as an option for easy movement.

[email protected] +964-750 379 462484

Automotivespray-booths

•Conquer

Ext. Int4.080 3.960

Ext. Int Ext. Int3.275 2.640 3.545 2.910

Measures

•Super Prestige

Ext. Int4.080 4.360

Ext. Int 3.545 2.910

Measures

•empress

Ext. Int3.900 3.820

Ext. Int Ext. Int3.275 2.640 3.545 2.910

Measures

•prestige Double booth

Ext. Int6.800 - 7.460 7.460 - 7.260

Ext. Int 6.140 - 6.800 5.940 - 6.600

Measures

•paint room •Dry Clean open

Measures

Ext. Int2.580 2.500Ext. Int

2.740 2.680Ext. Int

3.780 - 4.380 3.700 - 4.300

››basic frame suitable mm 100 (h) N° 1 access door, antipanic closing,mm 800x2.100 (h) L ateral walls, thickness mm 40 insulated sheet panels N°2 Lighting fixture composed by 4 fluorescent tubes of 36 Watt each equipped with electronic ballasts electric fan coupled by motor of kW 0,25 Prefilter for inlet air: mm 930x470 lights delayed 30’’with respect to ventilation.

•Dry Clean small

MeasuresExt. Int

4.080 3.880Ext. Int

2.744 1.600Ext. Int

3.160 2.640

Ext. Int4.080 3.880Ext. Int

2.744 1.600Ext. Int

3.160 2.640

[email protected] +964-750 379 462483


Ext. Int3.680 3.600

Ext. Int Ext. Int3.275 2.640 3.545 2.910

Ext. Int Ext. Int Ext. Int Ext. Int6.140 5.940 6.800 6.600 7.460 7.260 8.120 7.920

Generators capacity: da 16.000 m3/h 40.000 m3/h

Exhaust unit capacity: da 16.000 m3/h 40.000 m3/h

Measures

[email protected] +964-750 379 462486

•prep stations s 1000

L W3.680 3.600

L W Z6.140 3.680 400

L W Z3.700 1.040 680

Measures

Pit style with gratings 3.960x2.220 mm


Measures

Raised metal basement grating/checkered plate

6.140x3.680x400 (h)


Raised metal basement grating/checkered plate mm

6.140x3.680x400 (h)

Measures

L W Z5.940 3.560 2.640

L W Z6.140 3.680 3.275

•prep stations app1 s 1000 •prep stations app2 s 2000 •prep stations app2 s 3000

Measures

L W Z5.940 3.560 2.640

L W Z6.140 3.680 3.275

Measures

L W Z5.940 3.560 2.640

L W Z6.140 3.680 3.275

Measures

AutomotivePREP-STATIONS

[email protected] +964-750 379 462485


Ext. Int3.680 3.600

Ext. Int. Ext. Int. Ext. Int . Ext. Int. Ext. Int.9.500 9.300 12.200 12.000 16.220 16.020 18.860 18.660 21.500 21.300

Generators capacity: da 16.000 m3/h 40.000 m3/h

Exhaust unit capacity: da 16.000 m3/h 40.000 m3/h

INDUSTRIAL BOOTHS

•Midi / Maxi Range

Ext. Int3.680 3.600

Measures

60 mmDiesel fuel | LPG| MethaneMotorized roll up door2 lines of Lighting

fixtures in the upper partGlass woolWhite/Blue

COLOR INSULATING LIGHTING FRONT DOOR BURNER WALL THIKNESS

[email protected] +964-750 379 462488

Welding & bodyRepair

[email protected] +964-750 379 462487

mahmoud matar + amro+awni+ mohammed

•breathing equipment

5000 Hood

•sata® Filter

Raised metal basement

grating/check-ered plate

6.140x3.680x400 (h)

•sata spray guns

5000 b hVlp

jet X000b hvlp digital bardiff. nozzle with qccreusable plastic cup

•spray gun •sata germany •stanDox

speCtrophotometer & paints

Paints & spray Guns

Air Regulator belt

Air Carbon regulator

Air Humidifier

Jet x000RP diff. Nozzle with QCreusable plastic cup

Nozzle Size

1.2

1.3

1.4

1.5

1.6

1.7

[email protected] +964-750 379 462490


STEEL DENT PULLING DENT PULLING WORKSTATION

SPOT-WELDING COMPLETE DENT PULLING KIT

230V Steel Dent Puller with 3800A output current, ideal for all steel straightening and dent pulling jobs

Welding requirements of high strength steels UHSS/boron with a clamping force of 550daN with 8bars air pressure, and a welding current that can reach 14 500Amps

GYSLINER machines enable to:

> Remove dents without disassembling> Repair without replacing> Reduce the down-time> Increase margin> Improve profitability

EssEntial For rEpairing small mEdium and

Big-dEnts - sill, WhEElhousE, Car FEndEr

PROLINER you can:

> Remove dents without disassembling> Repair without replacing> Reduce the down-time> Increase margin> Improve profitability

a thrEE phasE mig-mag, With torCh ConnECtor, rEC-ommEndEd For WElding stEEl, stainlEss stEEl, aluminium and For mig Brazing oF high-tEnsilE strEngth stEEls

[email protected] +964-750 379 462489

Welding Machines

SMART-MIG PLASMA CUTTER 31 FV T3 GYS AUTO

GYSPOT 32DX MIG M1 GYS AUTO T1 GYS AUTO

Traditional A.C. Spot-Welder performs quality spot welds with new body car

steel including high strength steel

Single phase MIG-MAG, With torch connector

welding steel, stainless steel, aluminium

A three phase MIG-MAG, with torch Connector, recommended for welding steel,

Stainless steel, aluminum and for MIG brazing of high-tensile strength steels`

NO GASsingle phase welding machine

110A

Plasma with Inverter technology Ideal for maintenance work and

car body repair

MIG-MAG welding machine steel ,stainless steel ,aluminum

[email protected] +964-750 379 462492


gYs-mEtEr lCd mastEr WElding hElmEt

anglE air gindEr

prEssurE-FloWmEtEr (30l/min)

spECial WElding liquid Coolant

drill With KEYlEss ChuCK instant soldEring iron

inFrarEd thErmomEtEr

> Last generation digital display measuring tool,the GYSMETER allows making a quick diagnosis on all types of vehicles by making easy under body measurements (length, symmetry, and cross check)

> Shade: 3 / 11> UV/ IR DIN 15 Protection> No battery

[email protected] +964-750 379 462491


STEEL DENT PULLING RIVETING SYSTEM8T PNEUMATIC HYDRAULIC

saW For straight shEEt

mEtal Cutting

polYCarBonatE polishEr33 paintlEss dEnt rEpair piECEs

alu hammEr Kit mini grindEr tool Kit

air BElt sandEr

> Its hydraulic cylinder offers a much greater pulling force than any other manual dent pulling tool.

> The arm and cylinder minimize the effort required to straighten. The hydraulic pump is used like any classic hydraulic jack.

Technical DataDimension Weight Material

1.17x0.40x1.13 m 41 kg Steel

Common RIVETING tasKs in modErn

BodY-shops inCluding sElF-piErCing rivEts and standard FloW Form rivEts

[email protected] +964-750 379 462494


smart induCtor 200-240v+aCC ForCE 125 230v

aCd CardBoard CarrY CasE

lEathEra-Crust glovEs

ConsumaBlEspnEumatiC inErtia hammEr

WElding protECtions WElding loCK grip + Clamp

WindsCrEEn sEal Cutting tool

SMART PROTECTION

> Removal of glued parts (windows, rear win dows, plastic parts, stickers, glass roofs, interior and exterior trims,etc.) thanks to other optional accessories (Metal Releaser, Super Remover, Glass Genius, Wonder Pen, Pad Inductor).> Features: - intelligent control with Auto-check system - user-friendly digital panel - automatic and manual mode - activation and correct operation signals.

Code Phase Main Frq. Max P Heating Frq. IP Heating P D Weight

835012 200-240 50/60 Hz 2.4 Kw 35-100 Hz IP 21 2.3 Kw 39x26x23 cm 7.3 kg

Electrode welding machine in direct current (DC)

[email protected] +964-750 379 462493

Battery tester & charger

ChargEr startEr 12-24 v start paCK truCK BattErY BoostEr

BattErY tEstEr

moBilE invErtEr 300 - 1500W

12v > 230vautomatiC BattErY ChargEr

With miCroproCEssor

Jump lEads insulatEd Clamps solar poWErEd ChargEr

high pErFormanCE BoostEr

12/24v

> Shade: 3 / 11> UV/ IR DIN 15 Protection> No battery

>Maintains batteries even deeply discharged battery.

CHARGER FUNCTION

> The Neostart 420 charges 12V and 24V lead acid batteries from 20Ah to 1000Ah.

> It is a traditional charger. Charging must be monitored.

STARTER FUNCTION

>The Neostart 420 can start vehicles with 12V or 24V lead acid batteries from 35Ah to 160Ah.

> A pre-charge may be necessary to supply enough energy to start the vehicle.

In Volt Amper Watt ch. Battery Ah IP Fuse Dimension Weight

230 16A 2050w 12-24 20>1000 Ah IP 21 200A 47x32x27 cm 20.5 kg

[email protected] +964-750 379 462496

VosschemieCAR SYSTEM

ABRASIVE PUTTIES

PAINTING

MASKING

PAINT FINISH PERSONAL SAFETY

ACCESSORIESCLEANINGBONDING & SEALING

[email protected] +964-750 379 462495

Body-Repair BENCHES & WORKSTATIONS

Speed

Segment Cars and small SUVsPulling force per Draw Aligner

5 tons

Platform length 8’3”Platform width 2’ 6” (3’1” with arms)Lift Capacity(Maximum vehicle weight)

2500 kg / 5500 lbs

360o pulling capability YesMax. width with Draw Aligner

8’2”

Power 3 phase, 50 Hz, 200/220/400 V 1 phase, 60 Hz, 110/220 V

Description

Multifunctional platformforeffective repair of cosmetic body work

BenchRack

4200-6300Segment Cars, light trucks, SUV sPulling force per Draw Aligner

10 tons

Platform length 13’10” / 16’5” ---18’ / 20’8”Platform width 3’11”Lift Capacity(Maximum vehicle weight)

4200 kg / 9200 lbs

360o pulling capability YesMax. width with Draw Aligner

7’ 6.5”

Power 3 phase, 50 Hz, 200/220/400 V 1 phase, 60 Hz, 110/220 V

Description

A universal collision repairsystem for both cosmeticand structural repair for

any type of vehicle

[email protected] +964-750 379 462498

Paper Cleaning & Cloth Dust Masks Safety glasses - Gloves - Coats

Masking Cover

Paint Trolley

Silicon & H2O Cleaner

Hand Cleaners

Supporting/ Reinforcing FilmMicrofibre Cloth

Spray Out Cards

Clear Coat

Mixing Sticks

Booth Protection Mask Liquid Masking Film

Masking Tape

Body-RepairProduct

Gun Clean SetMasking Paper

Masking Film - Roll

Non-ConductiveAdhesive

Glass Bonding Agent

Sprayable Seam Sealer

Bonding & Sealing Compound

Pressurized Atomizer

[email protected] +964-750 379 462497

Body-RepairProduct

High performance abrasive Sanding Blocks Silicon Guns

ETCH PrimerPrimer SprayPlastic PrimerPlastic CleanerSilicon RemoverSpray Filler Spot-BlenderControl-Spray

Epoxy PrimerPaint SpraySilver WheelSpray

Rust RemoverBumper Paint Spray

Thermo SparyRallye SprayZink Spray

Polyester Multifunction Putty Multi Silver Light Putty Sheet Metal Surfaces Putty Multi Soft Putty

Special Putty for Working on Aluminum

Reinforced Fiberglass Putty for Steel, Aluminum and Galvanized

Universal use on all Steel, Aluminum and Galvanized Bodywork

Filling Deep Uneven Areas and Dents on Motor Vehicles

[email protected] +964-750 379 4624100

Dayblock Panel with 1-30 Suction Cup Seat Cover - Steering and Gear cover - Mate floor

Plastic wall Mounted Display Magnetic Fander Covers

PLASTICS PRODUCTION

[email protected] +964-750 379 462499

Paint Stand Paint Trolley MMIR Trolley Box

Body-RepairProduct

MMIR Trolley Car Clean Trolley Air Blow off Gun

Mini Infrared Thermometer UV LED Lamp Application Pad

More Than 1500

Differnet Products

[email protected] +964-750 379 4624102

ROTARY PolisherSYSTEM

ROTARY ANGLE POLISHER

TECHNICAL DATAØ polishing foam max 200 mmØ backing pad Availables 125 - 5” | 150 - 6” | 165 - 6.5”

mm-inPower 1200 WattR.P.M. 450 - 1700Weight 2,2 - 4,85 Kg-lbsBacking pad thread M14 and 5/8”Electrical Cord 9 - 29,5’ m - ft

ROTARY FOAM Polishing PadsCoarse

Ømm-Ø in135-5.25”160-6.25”

180-7”

FineØmm-Ø in135-5.25”160-6.25”

180-7”

UltrafineØmm-Ø in135-5.25”160-6.25”

180-7”

Polishing COMPOUNDS for ROTARY Polishers

Coarse Fine Ultrafine

1000 ml 1000 ml 1000 ml

BACKING Pads ROTARY Polishers

Size Ømm-Ø in165 - 6.5” 150 - 6” 125 - 5”

WOOL Pads for ROTARY Polishers

LH 19E/DLX

[email protected] +964-750 379 4624101

Rupes

[email protected] +964-750 379 4624104

NYLON SOFT/HARD Ø30

HORSEHAIR MEDIUM Ø30

Polishing backing pad Ø50mm

Polishing backing pad Ø30mm

Sanding backing pad Ø30mm

12mm orbit Fuctional Unit

3mm orbit Fuctional Unit

NANO SYSTEM

RANDOM ORBITAL POLISHER

TECHNICAL DATAHR81M HR81ML

Voltage VDC (Volt) 10,8 - 12R.P.M. 2000-5000Battery Life ~30min*Charging timeWeight (g) 470** 520**Dimensions (mm) 287x70x47** 332x70x47**

iBrid

RANDOM

CoarseØmm-Ø in

80-100 (3”- 4”)”130-150 (5”- 6”)

FineØmm-Ø in

80-100 (3”- 4”)”130-150 (5”- 6”)

UltrafineØmm-Ø in

80-100 (3”- 4”)”130-150 (5”- 6”)

Polishing COMPOUNDS for RANDOM Polishers


1000 ml 1000 ml 1000 ml

MeduimØmm-Ø in

80-100 (3”- 4”)”130-150 (5”- 6”)

Meduim

1000 ml

NANO iBrid FOAM Polishing Pads

NANO iBrid Accessories

HR81ML/DLX

[email protected] +964-750 379 4624103

Random OrbitalSYSTEM

RANDOM ORBITAL POLISHER

TECHNICAL DATAMARK I MARK II

Ø backing pad (mm) 150 - 6” 150 - 6”Ø orbit (mm-in) 21 - 13/16” 21 - 13/16”Power (Watt) 500 500R.P.M. 2000 - 4200 2500 - 4700Weight(Kg-lbs) 2,6 - 57,3 2,7 - 59,5Backing pad thread M8-FElectrical Cord 9 - 29,5’ m - ft

Size Ømm-Ø in 150-6” 125-5” 75-3”

21

RANDOM

TECHNICAL DATAMARK I MARK II

Ø backing pad (mm) 125 - 5” 150 - 6”Ø orbit (mm-in) 15 - 19/32” 21 - 13/16”Power (Watt) 500 500R.P.M. 2000 - 5000 2500 - 5300Weight(Kg-lbs) 2,5 - 55,1 2,6 - 57,3Backing pad thread M8-FElectrical Cord 9 - 29,5’ m - ft

15

RANDOM

TECHNICAL DATAØ backing pad (mm) 125 - 5”Ø orbit (mm-in) 12 - 5”Power (Watt) 400R.P.M. 4000 - 5500Weight(Kg-lbs) 2,6 - 5,73Backing pad thread M8-FElectrical Cord 9 - 29,5’

12

RANDOM

TECHNICAL DATAØ backing pad (mm) 75 - 3”Ø orbit (mm-in) 12 - 1/2”Power (Watt) 400R.P.M. 4000 - 5500Weight(Kg-lbs) 2,3 - 5,07Backing pad thread M6-FElectrical Cord 9 - 29,5’

75

RANDOM

RANDOM FOAM Polishing PadsCoarse

Ømm-Ø in80-100 (3”- 4”)”130-150 (5”- 6”)150-180 (6”- 7”)

FineØmm-Ø in

80-100 (3”- 4”)”130-150 (5”- 6”)150-180 (6”- 7”)

UltrafineØmm-Ø in

80-100 (3”- 4”)”130-150 (5”- 6”)150-180 (6”- 7”)

Polishing COMPOUNDS for RANDOM Polishers


1000 ml 1000 ml 1000 ml

MeduimØmm-Ø in

80-100 (3”- 4”)”130-150 (5”- 6”)150-180 (6”- 7”)

Meduim

1000 ml

BACKING Pads RANDOM Polishers

[email protected] +964-750 379 4624106

Tools

ELECTRIC Straight grinders Ø collet (mm) 6 ELECTRIC Mini angle grinders Ø disc (mm) 125 Mini orbital sanders Ø Orbit (mm) 2

ELECTRIC Random orbital brushless sanderØ Orbit (mm) 3-6

PNEUMATIC Random orbital palm sandersØ Orbit (mm) 3-6-9

PNEUMATIC Triple Action polisherØ Orbit (mm) 12-15

Battery Drill-screwdriverØ keyless chuck (mm) 10

DUST EXTRACTION SYSTEMS Mobile unitsVacuum case Power ( 1150 Watt )

Mobile Dust Extraction Unit Electric & Pneumatic Tools

Injection-extraction cleaning machines FoamMobile Turbine Work Station

[email protected] +964-750 379 4624105

Gear DrivenSYSTEM

MILE GEAR DRIVEN POLISHER

TECHNICAL DATAØ backing pad (mm-in) 125 - 5” | 150 - 6”Ø orbit (mm-in) 5 - 3/16”Power (Watt) 900R.P.M. 265 - 535Weight (kg-lbs) 2,80 - 6,17Backing pad thread 6 x M4Electrical Cord 9 - 29,5’

GEAR FOAM Polishing PadsCoarse

Ømm-Ø in130 - 5"140 - 5.5"150 - 6”165 - 6.5"

FineØmm-Ø in130 - 5"140 - 5.5"150 - 6”165 - 6.5"

UltrafineØm m-Ø in130 - 5"140 - 5.5"150 - 6”165 - 6.5"

Polishing COMPOUNDS for GEAR

DRIVEN Polishers


1000 ml 1000 ml 1000 ml

BACKING PadsGEAR DRIVEN POLISHER

Size Ømm-Ø in125 - 5” 150 - 6”

LK900 E/DLX

[email protected] +964-750 379 4624108

CLEANING MACHINES

> Battery-operated washer-dryer, ideal for medium-sized companies,works on all surfaces, excellent visibility, maximum strength, great performance, maximum working autonomy

> Vacuum Cleaners > Polishing Machine > PROFESSIONAL STEAM WASHING MACHINE WITH VACUUM

> Hot water high-pressure washers> Scrubbers for small to medium-sized businesses

> Electric Sweeper - Broom with external tube

ROLTRON 950B

FLOORTRON C143 TSN

ROLTRON 350B

POWER HP 3.5

PULITRON 70STN701

PULITRON 1050 ET

IDRTRON 200 CTN

BRIOTRON CC

PULITRON 1280 ET PULITRON 1404 ET

TURBOTRON HD TURBOTRON 350

[email protected] +964-750 379 4624107

Consumables

Polishing Foam & Compounds For Random Orbital and Triple Action POLISHERS

Polishing Foam & Compounds For ROTARY POLISHERS

Polishing Foam & Compounds For GEAR DRIVEN POLISHERS

WOOL PADS for* Random Orbital* Gear Driven* Triple Action

MICROFIBER PADS for* Random Orbital* Triple Action

WOOL PADS for* Rotary

Multipurpose Hyper Gloss Marine Wheel Fast

CleanerCrystal Glass

Polish

Detailing Shampoo & Multi Purpose Degreaser

Rapid Cleaner Detailer

Protective Shampoo

Protective Sealent

Leather Fast Cleaner

BIGFOOT Knee Pads

BIGFOOT Belt

BIGFOOT Claw Pad ToolSWIRL FINDER PEN LIGHTLuminous flux: 140 lumen

X-Cut Foam AbrasivesP1500 P2000 P3000

X-Cut Foam AbrasivesP40 P60 P80 P100 P120P180 P150 P220 P280 P320P360 P400 P500 P600 P800P1000 P1200 P1500 P2000

ABRASIVE WheelsBigfoot ApronMicrofiber ClothSpecial Chemicals

UHS

EASY GLOSS Foam

& compounds

High Solids Clear Coat Correction Compound

[email protected] +964-750 379 4624110

2-Post Lift with differient capacity up-to 8.1 ton

Combination Disc/Drum Brake Lathe with Bench & Standard Tooling

The revolutionary combination brake lathe uses independent DC servo motors to control the cross-feed and spindle feed drives, eliminating the need for complex mechanical gear boxes and

transmissions typically found on mechanically-driven brake lathes.

APEX PRODUCTS

Combination Disc/Drum Brake Lathe with Bench & Standard Tooling / Super-Duty

The heavy-duty, extended combination brake lathe is capable of truing a full 10” deep brake drum. It features independent DC

servo motors to command both the spindle feed drives and cross feed drives. This eliminates complex gear boxes and transmissions

found on mechanically-driven lathes.

Parking lift for home garage

[email protected] +964-750 379 4624109

2-Post Lift 4-Post Lift

Wheel Alignment Machines Wheel Balancer For Car’s

Automotive Washing Lifts For Cars & Trucks

Automatic Tyre Air Filling & N2 Filling Station

APEX PRODUCTS

Car High Lifts

Scissor Lift

Tyre Changer For Car’s

[email protected] +964-750 379 4624112

Oiling Equipment Oil & Grease

Special Hammers Elbow’s Connectors 90 - 45

Aluminum Air Pipes ALU pipe fittings

APEX PRODUCTS

Air Stainless steel + Aluminum System

Hose Reel Different Type 10 meter

Screw Compressor

[email protected] +964-750 379 4624111

Pallet Truck - Semi Electric - High LiftCapacity 1000 kg

Stacker - Manual - Semi ElectricCapacity up-to 2000 kg

SCISSOR LIFT - SELF PROPELLEDMax Height 11 meter

DUAL MAST ARIAL WORK PLAT-FORM Max ht:16 Meter Cap:350 Kgs

Movable car lift

APEX PRODUCTS

Motorcycle lifts

HYDRAULIC BARREL LIFT-ER & TILTER 350kg

Quick Movable jacks

[email protected] +964-750 379 4624113

DOWN YOUR notes.........

E-Mail : [email protected]

Mobile : +964-7503794624 / +964-7704292026

LIGHT Duty LIFTs - Apex-Equipments

Documents

Transcript of LIGHT Duty LIFTs - Apex-Equipments