Issue 70 - Northern Auto Parts

Northern Auto Parts Warehouse, Inc. 2003

Issue 70Expires 9/30/03

A thirty (.030) overbore 302 stroked to a347 using the stock 302 28oz balancerand flywheel.SCAT Series 9000 3.400 stoke Crankshaft• Lightening holes on all rod throws• Shot peened for strength• Micro-polished journals• Chamfered oiling holes

• SCAT Series 4340 Forged “I” Beam Rods • Hypereutectic pistons by KB1-347IPS-KB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$699.99

Scat’s Ford 347 Stroker kit

Heli-Core Custom Fit 8mm Wires3132 77-93 5.0 Mustang $49.993220 94-95 5.0 Mustang $49.99

To order Call Toll Free 1.800.831.0884

Must

an

g

2

ReTechElectric Fuel PumpsPremium Quality Remanufactured Fuel Pump. Builtby an O.E.M. Remanufacturer with more than 50years of experience to assure you of a dependablereplacement for your vehicle.

RE0067F 1987-93 Ford Mustang 5.0 . . . . . . . . . . . . . . . . . .$63.99Check application before ordering - More applications available *Prices do not include core charge

5.0L Ford Water PumpFits all 1986-93 5.0L V8s using a serpentine accesso-ry drive belt. Reverse rotation; not for early model289-302 V8s. Has heavy-duty 3/4” ball/roller bearing.Dimention from block surface to hub: 5-3/4”.8840 5/8” pilot shaft . . . . . . . . . . . . . .$149.99

Pro-Billet & BilletDistributorsREADY TO RUN! Built in module.

Features 5/8” smaller housing to accommodate exotic induc-tion setups and tight engine compartment. A maintenance-free magnetic pick up trigger’s the high voltage spark. No MSD Box Required.

8352 Ford V8, Ready To Run, Vac. Adv., 289-302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$294.99

ShiftersBillet aluminum shifters with stainless steel handles. Theseshort-throw shifters are strong enough to take most anyabuse. the base is constructed of sturdy billet aluminum,and the shifter handle is manufactured with a tough, high-grade steel. The base will retain factory console boot. Allhardware included except shifter knob.67032 83-96 Mustang w/T-5 . . . . . . . .$99.99

POWERTM Throttle BodiesOur new Throttle Bodies are made from permanentmold castings of 356 aluminum. They are offered in allpopular sizes for Ford Mustang injected engines. Notethat for street legal applications the 1986-’93 ThrottleBodies must be used with our companion EGR Plates.The 1994-’95 Throttle Bodies do not require an EGRPlate. Our Throttle Bodies are offered in a polished finishonly and will add that finishing touch to any injectedMustang. Early model Throttle Bodies include an OEMthrottle position sensor. Use the 65mm model for stockmanifolds, the 70mm model is ideal with our EFIMustang Intake System, the 75mm is for higher horse-

power engines which will require matching to the intake port on most mani-folds. Note: Throttle Bodies are 50 state legal when used on 1986-’95 FordMustang 5.0L V8.

69200 65mm for 1986-’93 Mustang 5.0LV8* . . . . . .$139.9969201 70mm for 1986-’93 Mustang 5.0LV8* . . . . . .$139.9969202 75mm for 1986-’93 Mustang 5.0LV8* . . . . . .$139.9969210 65mm for 1994-’95 Mustang 5.0LV8 . . . . . . .$159.9969211 70mm for 1994-’95 Mustang 5.0LV8 . . . . . . .$159.9969212 75mm for 1994-’95 Mustang 5.0LV8 . . . . . . .$159.99* Street legal applications must also use #695** Series EGR Plates

Power+Plus ManifoldsPower+Plus is the newest line of performanceintake manifolds available. As a result, we havebeen able to incorporate many new features inour manifolds not found in competitive models.Some of today’s most popular manifolds weredesigned 30 years ago and the makers havenever bothered to update the tooling to includemany of the new features desired by perform-ance enthusiasts. We engineered those featuresinto our manifolds.

54020 5.0L Ford EFI Polished . . . . . . . . . . . . . . . . . . . . .$399.9954021 5.0L Ford EFI Satin . . . . . . . . . . . . . . . . . . . . . . . .$299.99

Ford Application Part# Generation II Price94-95 Ford Mustang V8-5.0L 57-2511 No $160.9996-02 Ford Mustang GT, V8-4.6L 57-2519-3 Yes $236.99

MUSTANGMUSTANG Everything You Need

Electric FansRestores hp by replacing the stock fan, where applicable. Extends water pump life and increases gas mileage. • Strongest 15" electric fan available: out-performs all 16"!• Provides constant cooling, regardless of engine RPM.• One piece, lightweight nylon shroud.• Rigid bracket mounting system, no thru core mounting.• High torque, high RPM electric motor.• Built-in control box with adjustable thermostat 160-240, A/C relay and manual switch connection. • Motor leads can be reversed to create a pusher fan, but efficiency is reduced. • Dimensions: 18" x 16" x 4-1/4"

175 86-93 Ford Mustang 5.0L . . . . . . . . . . . . . . . . . . . .$209.99

Billet/PlusTM Manual ShiftersHurst Billet/Plus Shifters incorporate a high ratio pivot mecha-nism for reduced shifter throw and are sturdily constructed fora more positive precise feel when shifting. Self centering align-ment improves 2nd to 3rd up-shift gear changes to reduce thechance of “missed shifts.” Patented adjustable bias spring loadson most models allow stick tension to be tailored to driverspreference. Dedicated applications assure a custom fit andeliminate any vehicle modifications for ease of installation.• CNC machined 6061 T-6 Billet Aluminum base and stop

collar• Heat treated Billet Steel gear selector for ultimate strength• High strength steel stick. Not a casting

391-5030 83-93 V6/V8 BW T-5 . . . . . . . . . . . . . . . . . . . . . .$164.99391-5031 94-01 V6/V8 BW T-5, T-45 . . . . . . . . . . . . . . . . . .$164.99391-5070 83-93 Tremec 3550 . . . . . . . . . . . . . . . . . . . . . . .$175.99391-5072 83-98 V8 BW T-56 (aftermarket) . . . . . . . . . . . . . .$189.99391-5035 2001 V8 Tremec 3650 . . . . . . . . . . . . . . . . . . . . .$162.99

Musta

ng

3

Mustang HeadersTweak that horsepower out of that Mustang withaftermarket headers or tubular exhaust manifold sys-tem (T.E.M.S.) by Headman Headers. They are emis-sions legal stock replacement pipes. HTC Coating isthe best high temp coating on the market todaywith thermal protection up to 1300°. More durablethan chrome so they are less likely to chip or peel.The HTC coating offers better heat insulation and iseasy to clean.

88300 64-73 Mustang 5.0 - C4 trany, 71-73 auto only $129.9988300-6 HTC coated . . . . . . . . . . . . . . . . . . . . . . . . . .$369.9988360 79-93 Mustang 5.0 shortie style . . . . . . . . . . .$118.9988360-6 HTC Coated . . . . . . . . . . . . . . . . . . . . . . . . .$359.9988600 86-93 Mustang 5.0 stock replacement (TEMS) .$119.9988600-6 HTC Coated . . . . . . . . . . . . . . . . . . . . . . . . .$359.99

Heavy Duty MustangControl ArmsKit includes upper and lower rear control arms.Strengthen your Mustang suspension by replac-

ing your “flimsy” control arms with our strong .120" wall control arms.68070 Mustang ’79-98 . . . . . . . . . . . . . . . . . . . . . . . .$179.99

MUSTANGMUSTANGFor Your Mustang!

Mustang NitrousHide-A-PanelThis ashtray mount panel is ideal for 5.0L rac-ers looking to conceal their nitrous capability.Includes three lighted on/off rocker switchesand one momentary switch for purge func-tion. Comes fully assembled and completewith mounting hardware. Fits 1987-97 5.0LMustangs.

50422 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

Nitrous System forMustang75 horsepower system comes with 10 lb.unfilled bottle,solenoids, nozzles, feed line,hardware.05115NOS 1986-95 Ford Mustang 5.0L,

fuel injected . . . . . . . . .$475.9905116NOS 1999-2001 Mustang 4.6L

GT/Cobra, EFI; . . . . . . . .$729.99

Super Hi-Miler HoseCombat high engine temperatures withGoodyear’s Super Hi-Miler High Performance BlueHose. Super Hi-Miler is a blue, high heat-resistanthose designed to provide superior performanceover standard EPDM coolant hose.

5001 Ford Mustang 5.0L 86-93 . . . . . . . . . . . . . . . . . . . . .$65.995012 Ford Mustang 5.0L 1994-95 (except Cobra) . . . . . . . . .$74.995013 Ford Mustang 289, 302 & 351 V-8 Engine 1964-69 . . .$48.995014 Ford Mustang 5.0L 1979-85 . . . . . . . . . . . . . . . . . . . .$54.99

Bushing Master SetsEnergy Suspension introduces the Hyper-FlexSystem Performance Polyurethane BushingMaster Sets for the most popular car and truck models, both import and domestic. Now, withjust one part number you can replace all of themajor suspension bushing components with Hyper-Flex performance polyurethane.

Specify your color of R - red or G - black by adding R or G to theend of the part #

Ford Mustang

4-18111 1967-73 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$76.994-18110 1985-93, includes transmission mount . . . . . . . . .$189.99• Please verify application before ordering •

SA05 Ford Performance . . . . . . . . . . . . . . . . . . . . . . . . .$18.99SA50 Nitrous Oxide Injection Guide . . . . . . . . . . . . . . . . .$18.99SA54 5.0L Mustang Bolt-ON Performance Guide . . . . . . .$18.99SA56 Ford Engine Parts Interchange Manual . . . . . . . . . .$18.99SA61 5.0L Ford Dyno Tests . . . . . . . . . . . . . . . . . . . . . . .$18.99SA69 How to Build Max Performance Ford V-8s

On A Budget . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99

Car TechAuto Books & ManualsDifferent Mustang related how-to-books on everything from nitrous oxide injection to building performance on a budget.

Digital-6 PlusAdvanced digital technology makes this the ulti-mate street performance ignition. Features multi-spark, CD design with built-in Two Step Rev Controland single stage retard.• Built-in Start Retard • Two Step Rev Control fordrag racing • Single retard for nitrous applications• Fully potted • CARB Approved6520 . . . . . . . . . . . . . . . . . . . . . . . .$279.99

Ch

evy S

-10

4

Chevy S-10Chevy S-10 Smokin’ Hot S-10 Parts!

Electric FansRestores horsepower by replacing the stock fan, where appli-cable. Extends water pump life and increases gas mileage. • Strongest 15" electric fan available: out-performs all 16"!• Provides constant cooling, regardless of engine RPM.• One piece, lightweight nylon shroud.• Rigid bracket mounting system, no thru core mounting.• High torque, high RPM electric motor.• Built-in control box with adjustable thermostat 160-240,

A/C relay and manual switch connection.• Motor leads can be reversed to create a

pusher fan, but efficiency is reduced.• Dimensions: 18" x 16" x 4-1/4"

60 82-02 Chevy/GMC, S-10/Blazer 4 cyl. . . . . . . . . . . .$197.99

Low-Profile ElectricFans - V8 Swap FanExtremely low-profile allows these fans tofit where others won’t. Increases horse-power by replacing the stock belt fan. Asa pusher fan, it supplies additional coolingwhen required. As a primary electric fan,it increases HP, extends water pump lifeand increases gas mileage. One-piece,lightweight plastic shroud with full con-tact rubber seal maximizes cooling area.With thermostat and A/C relay210 Dual fans, 15-1/2” x 26-1/4” x 2-5/8” . . . . . . .$219.99Without thermostat and A/C relay220 Dual fans, 15-1/2” x 26-1/4” x 2-5/8” . . . . . . .$195.99

These colors available: Prices Vary

Power Programmers for S-10360202 4.3 1996370202 4.3 1997380202 4.3 1998390202 4.3 199930001 4.3 200030008 4.3 200130012 4.3 w/auto 200230019 4.3 w/auto 2003

• TD Performance Products Motor Mount Kit • Headman Hedders • Be Cool Conversion Radiator

V8 Conversion Kits

Part# Make Year Engine Swap Tranny Price1815 *S10 82-93 S/B Chevy Manual $491.081816 *S10 82-93 S/B Chevy Auto $534.831816A *S10 94-02 S/B Chevy Auto $544.901816B *S10 94-02 S/B Chevy Manual $501.15

* 2 wd Only

Kits may include spindles, blocks, U-bolts, front and rear shocks.

Complete Spindle Lowering Kitswith Nitro Drop Shocks

Chevy/GMC - Nitro Drop Shocks264 82-00 S-10/S-15 P/U standard cab - 2” front, 2” rear . .$349.99268 82-00 S-10/S-15 P/U standard cab including extreme

2” front, 3” rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$339.99272 94-00 S-10/S-15 P/U extended cab - 2” front, 2” rear .$325.99274 94-00 S-10/S-15 P/U extended cab including extreme

2” front, 3” rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$339.99

Competiton/PlusTM ManualShifters

391-0110 91-94 6-Cyl New Venture 3500 . . . . . . . . . . . .$169.99391-0111 95-97 6-Cyl New Venture 1500 . . . . . . . . . . . .$169.99391-0113 98-01 6-Cyl New Venture 3500 . . . . . . . . . . . .$169.99

The industry standard for over 30 years, this shifteroffers state of the art transmission control for popular 4,5 & 6-speed manual transmissions. Dedicated applica-tions assure a custom fit to a wide variety of vehicleshaving factory consoles without any floor pan modifica-tions.•Race track proven design and reliability• Heat treated linkage rods and arms for addedstrength and durability• Adjustable gear stops prevent overshifts to help prolong transmission life•Bolt-on chrome-plated stick with attractive customwhite knob• Complete with all hardware and easy to follow instal-lation guide


YourChoice

$339.99Each

Ch

rysle

r

5

Chrome Valve Covers4495 . . . . . .SB Chrysler $39.994491 . . . . . .BB Chrysler $44.99

CHRYSLERCHRYSLER

All Engine Rebuild Kits Come Complete With Top Quality Parts From:Federal-Mogul/Sealed Power, Cloyes, Hastings, Melling and Victor Reinz Gaskets.• Fel-Pro, Clevite and Cloyes available at extra cost• Valley pans and Cam followers are not included in kits• Moly Rings available at extra cost

Oversizes on Rod & Main Bearings, Piston & Rings are Available At No Extra Cost• Rering Kits Include: Piston Rings, Rod/Main Bearings and Gasket Set• Master Kits Include: Cam, Lifters, Timing Set, Pistons, Piston Rings,

Rod/Main/Cam Bearings, Oil Pump, Frost Plugs and Gasket Set• Cam Kits Include: Cam, Lifters, Timing Set

Chrysler Year Rering Master Cam318 Car 79-89 96.49 314.80 97.64340 68-71 116.65 466.89 119.74360 Roller 89-90 96.80 541.36 308.79440 2/B 68-73 155.18 620.39 144.89AMC Year Rering Master Cam258 71-80 93.98 368.91 107.69304 70-81 144.83 499.88 146.39401 71-78 184.14 561.83 131.11

We Have Performance Cams & Accessories Available Too!

Let Us Help You Build a Custom Engine Kit to Fit Your Needs.

Adjustable Rocker ArmsFits Chrysler. Supplied with hardened shaft and hardware.66869 1.5 Ratio for S/B* . . . . . . . . . . . . . .$229.99*66418C Pushrod Must Be Used . . . . . . . . . .$79.99

66868 1.5 Ratio for B/B* . . . . . . . . . . . . .$229.99*66419C 383-400 Pushrod Must Be Used . . .$79.99*66421C 413-440 Pushrod Must Be Used . . .$79.99

Performer Kit2176 318-360 Non EGR Manifold1405 Carburetor1221 Air CleanerMS90109 FelPro Gaskets

Kit# 1704 . . .$429.99

The "3715" Dodge Ram Truck "GAS" Micro Tuner is very simple toinstall. Plug the Micro Tuner into the vehicles ALDL diagnostic port,located inside the vehicle. Program your vehicle with "SuperchipsSignature Tuning" in just a few minutes. User options on the "3715"are as follows. • Raise rev limiter • Raise speed limiter

• Correct speedometer for tire height changes on 2 and 4 wheel drive vehicles • Speedo corrections will work on all, except some very early 1998 models.

3715 1998 - 2003 5.2L & 5.9L Models . . . . . . . . . . . . . . . . . . . . .$359.99

“GAS” Micro Tuner For Dodge Ram Truck

• LIMITED TIME OFFER •FREE K&N STOCK REPLACEMENT AIR FILTER

WITH “GAS” PROGRAMMERor D-BoxPurchased from 7-1-03 to 9-30-03

Chrome Alternator100% New!!! Fits all Chrysler with 60 AMP66447 . . . . . . . . . . . . . . . . . . . . . .$159.99

D-Box - Gain an Extra 65 HP and 185ft/lb Torque!DODGE RAM TURBO DIESEL, THE POWER’S IN THE D-BOX.

• Easy installation, there’s no wire cutting or soldering.• Connects to the ECM Data Link connection and MAP sensor.• Has low EGTs (Exhaust Gas Temps) without exhaust upgrade• Is very reliable and backed by Superships.4200 98 1/2-2000 Dodge Cummins Diesel .$559.994300 2001 Dodge Cummins Diesel . . . . . .$559.994400 2002 Dodge Cummins Diesel . . . . . .$559.99

Electronic DistributorsVacuum advance models. Each high performance, blue-printed distributor is factory set with a high-performanceadvance curve. Includes an adjustable vacuum advanceunit, a premium tan cap with brass inserts for maximumconductivity and rotor.66990 273-318-340-360 . . . . . . . . .$119.9966992 361-383-400 . . . . . . . . . . . .$119.9966994 413-426W-440-426 Hemi . . .$119.99

Electronic ConversionDistributor KitsThese complete high performance distributor kits will con-vert your old point-type ignition to new electronic ignition.Each kit includes distributor with high performanceadvance curve, along with an electronic control unit,wiring harness, ballast resistor and detailed installationinstructions.66991 273-318-340-360 . . . . . . . . .$159.9966993 361-383-400 . . . . . . . . . . . .$159.9966995 413-426W-440-426 Hemi . . .$159.99

AMC/Chrysler HEIStreet/Strip DistributorsUtilizing the durable and dependable HEI system pio-neered by GM, these units offer calibrated advance curvesthat are optimized for maximum combustion efficiency andfor the elimination of detonation damage. Durable one-piece design: the coil and module are mounted internallyfor easy one-wire hook-up. Each unit includes a high-power coil, a premium hi-dielectric red cap with brass ter-

minals, and a low-saturation ignition module. By eliminating the stock- AMCballast resistor, more ignition voltage results in improved spark that permits abigger spark plug gap, resulting in more power and reduced plug fouling.Incorporates easily found HEI replacement parts.

67185 AMC 290-304-343-360-390-401 . . . . . . . . . .$249.9967186 AMC 232-258 Inline 6 Cylinder . . . . . . . . . . .$249.9967040 Chry. 273 - 318 - 340 - 360 . . . . . . . . . . . . . .$299.99


New

Pro

ducs

6

TwinPowerDual Tone Electric Horns This horn will exceed the output of O.E. electrichorns. Needs no compressor or air hoses, savingboth time and labor. Installs easily in any 12 volt vehicle. Use as replacement or combine with existinghorns. Made of durable ABS plastic for years ofdependable service. Kit includes everything neededfor a professional installation.200 . . . . . . . . . . . . . . . . .$34.99

MaxiSoundTruly Universal - FitsAll Vehicles BuiltSince 1955. Two universal horns- one high tone,one low tone. Easy to install in any 12 volt vehicle.Two terminals. Each horn has a bright chrome grilland a red plastic cover. Rugged construction willinsure many years of dependable service.320-2T . . . . . . .$19.99

Fun Horn Distinctive Ooga Sound. 12 volts,powered by a heavy-duty motor,easily installed in any vehicle, 2 ter-minals.330 . . . . . . . . . .$34.99

Juke Box One touch playsany of the 34 pre-programmedsongs. Juke Box isdesigned to worklike a piano key-board. A musicbook is included so that you can program hun-dreds of your favorite songs, college, children’s,holiday, patriotic songs and more.336 . . . . . . . . .$44.99

Animal House ElectricHorn & P.A. System To attract immediate attention, Animal House isthe one to buy for its loud animal or sirensounds. 30 different sounds to choose form - 16musical tunes, 9 animal, and 10 siren. Use themicrophone to convert the Animal House horninto a powerful P.A. system - great for sportsevents, etc. Features a volume control that adjustsfrom soft to loud. Built with the latest state-of-the-art electronics for years of dependable service.Easy to install in all 12 volt vehicles.345 . . . . . . . . .$44.99

Air Max Air powered-very loud. 12 volt 2 plastic durable trumpets. The compact size compressormakes installation easy in the tight-est engine compartments, mainte-nance free. Kit comes completewith all needed mounting hard-ware and relay.402 . . . . . . . . . . . . . . . . . $19.99

Airmite 3 Air powered-extra load. 12volts, 3 durable red plastictrumpets, easily installed inall vehicles. Heavy dutycompressor, maintenancefree. Kit includes relay andmounting hardware.405 . . . . . . . . .$39.99

Long Horns Air powered horn that producesa powerful Big Rig Truck Sound.Two (2) durable red plastic trum-pets that are easy to install inany 12 volt vehicle. Heavy-dutycompressor is maintenance free.Kit contains relay and all mount-ing hardware. 417 . . . . . . . . . . . . . . . . .$34.99

Powerhouse Roof Mount Dual trumpet air horns - Chrome plated metal trum-pets with weather protection covers that easilyattach to front of trumpets. For roof mounting ontrucks, RV’s, vans, etc. Extra loud big truck sound.Heavy duty compressor. Kit includes relay, hoses, fit-tings and mounting hardware. 418 . . . . . . . . . . . . . . . . .$69.99

Musical HornsAir Powered -118 DecibelsLoud Attracts ImmediateAttention - Durable plastictrumpets. 12 volts extra dutycompressor, maintenancefree. Kit includes relay andmounting hardware.425 Lacucaracha $59.99430 Dixieland $59.99

Handy Horn Hand held horn made ofdurable red plastic. Extra loadsound. Ideal for marine, sport-ing events, camping, etc.Comes with 12 oz. can of envi-ronmentally safe 134A gas.490 . . . . . . . . .$14.99

Back-Up Alarm The Ba-52 produces a loud beepingsound when the vehicle is put intoreverse. Small in size, easier tomount. The warning sound can bea life saver.BA-52 . . . . . . . . .$9.99

Xtreme AirHornsXtreme air horns have 2durable trumpets. Adds a greatperformance look to the enginecompartment. Installs easily inany 12 volt vehicle. Kit includesa heavy-duty maintenance freecompressor, relay and allmounting hardware.

X-1005 Yellow $29.99X-1010 Blue $29.99

Air Max ChromeDual Tone Air Horn Wolo's NEW Model 403 isperfect for any 12 volt vehi-cles. Kit has two (2) durableplastic trumpets with abright chrome plated finish.Comes with our new com-pact maintenance free com-pressor, compressor is also chrome plated. Comescomplete with all mounting hardware, easily installsin any vehicle. Will give many years of dependableservice. Instruction in English / Spanish. 403 . . . . . . . . . . . . . . . . .$21.99

order online! northernautoparts.com

New

Pro

ducts

7

Chevy Small-Block Electric Water PumpEliminates unnecessary weight andimpeller-drag experienced at high RPM,pumps up to 35+ gallons of water perminute, and delivers the cooling that canmake the difference between a win andsecond place! Durable, but light-weightaluminum, epoxy powder coated for corro-sion resistance, and can be used for streetuse. Fitting for water pump included.

66225R Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.9966225B Blue (shown above) . . . . . . . . . . . . . . . . . . .$149.9966225BK Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.99

Staggered Bolt Pattern StarterFits all Chevy™ V6 and small and big block V8 enginesusing 168 tooth flywheels. 10:1 compression. For high-er compression please see P/N 67052. PROFORM®Starters are 100% NEW, not rebuilt. Our offset designresults in more clearance between the oil pan and thestarter, and can be rotated for additional chassis clear-ance. Approved by all leading sanctioning organizations.66268 . . . . . . . . . . . . . . . . . . . . . . .$139.99

High-Torque StarterFits Chevy™ small block and big block engines. Strongenough to crank 11:1 compression, this compact unit has12 adjusting positions for maximum installation clearance,and it utilizes reliable permanent magnet technology toachieve such extraordinary weight-to-torque performance.PROFORM® Starters are 100% NEW, not rebuilt. Our off-

set design results in more clearance between the oil pan and the starter, andcan be rotated for additional chassis clearance. Approved by all leading sanc-tioning organizations.66272 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $184.99

Chrysler® ElectronicDistributorVacuum advance models. Each high performance, blue-printed distributor is factory set with a high-performanceadvance curve. Includes an adjustable vacuum advanceunit, a premium tan cap with brass inserts for maximumconductivity, and rotor.66990 273-318-340-360 . . . . . . . . .$119.9966992 361-383-400 . . . . . . . . . . . . .$119.9966994 413-426W-440-426 Hemi . . . .$119.99

A N Hex Wrenches - Full SetAffordable A N Hex Wrenches. Color coded forfast identification, these PROFORM® wrenchesoffer resistance to scratching hose fittings as theyare being tightened and loosened. Full set, issupplied with a fold-over pocket pouch.66978 . . . . . . . . . . . . . . . . . . . .$69.99

Adjustable Pinion SnubberThis simple device helps you control wheel hop. It will alsohelp keep the rear axle from rotating during hard acceleration.68080 Mustang ‘85-93 . . . . . . . . . . . . . . . .$59.99

Heavy Duty MustangControl Arms

Kit includes upper and lower rear control arms. Strengthen your Mustangsuspension by replacing your “flimsy” control arms with our strong .120"wall control arms.68070 Mustang ’79-98 . . . . . . . . . . . . . . . . . . . . . . . .$179.99

Ford Under Drive Pulley KitThis steel pulley kit reduces the drive RPM from 14% to22% which will increase your performance. Also, this canbe used with the stock serpentine belt.68090C 5.0 Mustang ‘87-93 . . . . . . . .$99.99

Mechanical SecondaryRace Series CarburetorsFinally an affordable high-performance race carbure-tor! Proform’s new Race Series Carburetor is handassembled in the U.S. utilizing the Proform High-FlowCarburetor Main Body, durable billet metering blocks,and a high performance billet throttle baseplate.

67200 750 CFM Proform Race Series Carburetor . . . . . . .$499.9967201 850 CFM Proform Race Series Carburetor . . . . . . .$539.9967202 950 CFM Proform Race Series Carburetor . . . . . . .$569.99

ShiftersBillet aluminum shifters with stainless steel handles. Theseshort-throw shifters are strong enough to take most anyabuse. the base is constructed of sturdy billet aluminum,and the shifter handle is manufactured with a tough, high-grade steel. The base will retain factory console boot. Allhardware included except shifter knob.67032 83-96 Mustang w/T-5 . . . . . . . .$99.99

GM Licensed High-Tech Collector’sSeries FullDress-Up KitGive your engine a truly unique

& striking look. These stamped steel bolt-on parts are electrostatically painted& baked with durable high-tech gray epoxy, finished with the famous BowTie and CHEVROLET emblems. Kit includes: one set of valve covers, air clean-er, timing chain cover, breather cap, 8 wing nuts and 8 hold-down clamps.141-360 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.99

Electric Piston Ring FilerAccurately set end gap with Proform’s powerful electricring filling tool. Powered by a 12 volt rechargeable bat-tery. Offers maximum speed and affordability. Comeswith two 120-grit grinding wheels and battery recharg-er. Portable or can be bench mounted.66765 . . . . . . . . . . . . . . . . . .$199.99

Replacement 120-grit Grinding WheelOptimize the performance of Piston ring Filers P/N 66785 and 66765with these replacement grinding wheels.66786 For part #66785 . . . . . . . . . . . . . . . . .$9.9966762 For part #66765 . . . . . . . . . . . . . . . . .$9.99

Heavy-Duty Rod Splitting FixtureQuickly separate the cap form the rod without damageusing Proform’s new Heavy-Duty Rod Splitting Tool. Simplyloosen the rod nuts a couple to turns, place the rod onto thesplitting fixture, and pull the handle. Portable, for use withour bench top vise.66773 . . . . . . . . . . . . . . . . . . . . . . .$99.99

Chrysler Year Rering Master Cam Notes360 Roller 89-90 96.80 541.36 308.79360 Roller 91-92 166.44 619.20 314.16 3383 68-71 123.74 576.94 167.09400 72-79 145.33 552.66 126.89413 Hyd 59-65 246.70 792.21 190.40 3440 2/B 68-73 155.18 620.39 144.89440 2/B 75-78 139.43 563.80 144.89Ford Year Rering Master Cam Notes1.6-5 Tracer 87-89 151.28 391.66 94.26 7,91.9-9 CFI flat 87-90 134.33 419.54 121.86 21.9-9 CFI Roller 87-90 134.33 569.33 271.65 21.9J EFI flat 85-86 151.56 478.75 126.63 21.9J EFI flat 87-89 134.33 406.03 111.40 21.9J EFI Roller 87-90 134.33 557.56 281.54 2,52.0 Ranger 83-88 108.85 290.40 86.76 2,72.3 81-84 72.06 237.03 85.742.3 85-7/15/86 100.78 281.25 85.742.3 7/16/86-90 110.96 288.73 86.762.3 HSC 84-91 93.04 329.63 109.84 22.3 Turbo 83-7/15/86 114.10 334.04 86.76 22.3 Turbo 7/16/86-88 131.53 351.50 86.76 22.3 Ranger 83-84 72.06 238.05 86.762.3 Ranger 85-87 97.10 275.49 86.762.3 Ranger Roller 87-94 109.68 401.53 210.04 22.5 HSC 86-90 91.11 329.89 109.84 22.8 83-86 120.51 375.24 117.452.9 Ranger 86-92 142.21 411.00 117.013.0U Car (Hyd) 86-90 124.40 361.73 105.783.0U Car Roller 92-94 191.31 575.11 264.81 33.0U Ranger (hyd) 91 194.50 433.79 105.783.0U Ranger Roller 92-95 194.50 596.86 264.81200 65-83 105.21 327.39 101.303.8 82-87 122.76 359.76 104.433.8 88 152.54 406.21 112.61 23.8 A/T Roller 89-93 152.54 554.39 260.79 24.0 90-94 196.56 501.30 155.86 2,9250 69-80 88.65 343.50 122.39255 80-82 131.50 365.90 86.85289 63-68 78.89 263.04 108.80292 55-62 208.01 732.04 306.83 3


En

gin

e K

its

8

All Engine Rebuild Kits ComeComplete With Top QualityParts From:Federal-Mogul/Sealed Power, Cloyes, Hastings, Melling and Victor Reinz Gaskets.• Fel-Pro, Clevite and Cloyes available at extra cost• Valley pans and Cam followers are not included in kits• Moly Rings available at extra cost

Oversizes on Rod & Main Bearings, Piston & Rings are Available At No Extra Cost• Rering Kits Include: Piston Rings, Rod/Main Bearings and

Gasket Set• Master Kits Include: Cam, Lifters, Timing Set, Pistons, Piston

Rings, Rod/Main/Cam Bearings, Oil Pump, Frost Plugs andGasket Set

• Cam Kits Include: Cam, Lifters, Timing Set

1. With Forged Pistons 2. With Premium Rings 3. With Fel-Pro Gaskets

4. With Double Roller 5. Without Cam Bearings 6. Without Oil Pump

7. Without Frost Plugs 8. Without Camshaft 9. Without Lifters

10. Without Timing Set 11. Without Pistons

“NOTES” Detailed Explanation

AMC/Jeep Year Rering Master Cam Notes2.46 (2.5) ex Premier 83-90 77.75 307.46 107.30134 F Head 53-71 127.86 409.91 125.85 3,7,9232 64-79 93.98 399.75 107.694.0 242 87-91 108.49 413.91 148.434.0 242 92-94 133.53 440.95 148.43 3258 71-80 93.98 368.91 107.69258 81-90 94.11 347.16 104.84304 70-81 144.83 499.88 146.39360 70-91 131.15 447.58 131.11390 68-69 166.18 488.05 131.11401 71-78 184.14 561.83 131.11Chrysler Year Rering Master Cam Notes1.5 85-90 111.11 354.21 96.78 5,7,92.0-SOHC 83-84 143.13 326.80 75.20 2,5,6,7,92.0-SOHC 85-87 143.13 393.01 141.41 2,5,6,72.0-SOHC 88-91 121.79 452.96 145.28 5,6,72.2 86-88 87.03 321.73 121.812.2 89-92 94.74 349.44 133.132.2Turbo w/o Int Cool86-88 103.34 355.51 121.812.5 86-87 94.74 318.23 105.542.5 88 94.74 339.43 126.742.5 89-95 94.74 366.98 133.132.5 Turbo w/o Int Cool89-92 112.08 357.11 133.13 22.6 RWD Hyd 85-89 123.81 469.11 175.73 22.6 FWD Mech 86-87 123.06 392.53 99.89 2,92.6 Turbo 86-89 123.00 410.91 175.73 2,63.0-3 87-89 184.58 615.56 250.39 23.0-3 90-93 184.58 672.86 307.69 23.3 91-95 208.08 599.61 259.21 2,3225 Mech 60-80 91.90 334.30 112.26225 Hyd 81-87 91.04 383.84 162.583.9 238 Hyd 87 111.78 365.61 132.93 23.9 238 Roller 88-90 111.78 466.86 234.18 2318 Hyd 69-73 99.04 354.04 97.64318 74-78 99.04 317.74 97.64318 Car 79-89 96.49 314.80 97.64318 Truck 79-87 99.13 354.13 97.64318 Roller Car & Trk 85-89 99.14 565.28 308.79 4318 Trk Roller 92-93 216.95 694.08 318.49 2,3340 68-71 116.65 466.89 119.74360 71-88 105.24 344.93 108.11

350 Chevy Engine Kit $154.99

Due to Volitility of Valve Lifters, Prices Are Subject to Change


En

gin

e K

its

9

Ford Year Rering Master Cam Notes300 67-5/14/85 87.54 273.10 97.36300 5/15/85-86 93.85 278.34 97.36300 87-95 112.56 297.10 97.36302 Hyd Car 68-76 78.89 199.99 86.41302 Hyd Car 77-85 80.86 199.99 86.85302 Roller w/o HO 85-86 127.23 554.30 337.73302 Roller w/o HO 87-88 127.23 538.20 345.79 4302 Roller w/o HO 89-93 129.96 536.83 345.79302 Truck 77-11/30/82 78.89 199.99 86.85302 Truck 12/1/82-86 80.86 199.99 86.85302 Truck 87-88 127.60 275.53 86.85302 Truck 89-91 129.26 285.95 94.91302 Truck Roller 92-95 129.96 548.69 357.65312 56-60 227.41 788.49 306.83330 MD 64-77 161.38 540.11 132.14 2,4330 HD 73-77 144.24 486.60 132.14 2,4351C 2/B 70-74 106.94 390.69 86.73351C 4/B ex CJ 70-74 106.94 415.61 111.65351M 75-82 80.58 281.36 86.73351W Car 72-74 83.39 283.63 86.20351W Car 75-76 83.39 284.44 86.20351W Car 77-79 84.99 261.85 86.20351W Car 80-7/10/83 83.39 261.24 86.20351W 7/11/83-86 85.70 262.56 86.20351W Car Carb, EFI 87-91 101.31 310.49 118.40 4351W Truck 75-76 84.19 261.24 86.20351W Trk 2/B 77-12/10/84 85.70 262.56 86.20351W Truck 4/B 84-12/10/84 85.70 306.95 130.59351W Truck 2/B 85 85.70 286.78 110.51351W Trk 4/B, EFI 85-5/31/87 101.31 294.84 118.48351W Truck 6/1/87-93 101.31 310.49 118.48351W Truck Roller 94-95 136.64 562.75 331.24360 68-76 114.19 331.33 98.13361 3 Ring Piston 66-78 158.78 506.13 135.70 2,4370 LD 79-90 186.63 517.43 116.70 2,4390 Car 4/B 66-71 114.19 394.75 112.65390 Truck 68-76 114.19 356.53 98.13400 Car 71-76 80.58 263.01 86.08400 Car 77-79 81.38 264.28 86.73400 Truck 77-82 81.38 263.63 86.08

Ford Year Rering Master Cam Notes6.9 Diesel 83-87 328.31 1274.29 510.55 2428 ex CJ 66-70 140.51 496.14 112.65429 Car Hyd 68-73 117.33 452.59 94.35429 Truck 79-90 276.09 635.99 116.70 2,47.3 Diesel 88-94 441.14 1465.90 510.55 2,3,7460 Car ex Police 68-78 117.38 333.79 94.35460 Truck 73-3/11/85 117.33 334.48 94.35460 Truck 3/12/85-87 141.63 358.00 94.35460 Truck 88-91 170.84 483.71 107.54 4General Motors Year Rering Master Cam NotesChev 1.6-C 76-87 114.74 393.95 135.18 2,5Chev 1.6-4 85-88 134.23 320.15 75.85 2,5,7,9Chev 1.8 LUV 76-82 107.15 349.06 104.64 9Pont 1.8-J Turbo 84-86 130.66 464.88 135.13 2Pont 1.8-O 82-86 130.66 462.01 131.86 2,5Chev 1.9 S10 83-85 138.21 403.30 104.64 2,9Chev 2.0-B,P 84 111.63 327.08 97.31 2Chev 2.0 P 85-86 91.61 307.64 97.31Chev 2.0-1 87-89 128.40 347.61 108.34 2Chev 2.0 Y S10 83-84 127.23 349.90 97.11 3Pont 2.0 K, 87-91 153.70 379.44 147.99 2,5,6Chev 2.2 G, 4 90-93 102.85 337.88 108.34Old 2.3 D Quad 4 87-94 192.06 736.15 394.98 2,5Chev 2.5 A S10 91-93 92.99 355.40 169.44 2Chev 2.5 E S10 85-91 90.74 336.30 152.60 2Pont 2.5 R 82-84 80.70 262.45 88.91 2Pont 2.5 R Roller 85-86 80.70 326.14 152.60 2Pont 2.5 R Roller 87 88.09 333.65 152.60 2Pont 2.5 R Roller 88-89 90.04 319.70 152.60 2,6Pont 2.5 R Roller 90 92.99 339.50 169.44Pont 2.5 U 85-87 93.34 343.60 155.04 2Pont 2.5 U 88-89 101.83 336.20 155.04 2,6Pont 2.5 U 90-91 106.83 353.14 172.25 2,6Chev 153 62-70 93.21 272.89 108.69Chev 2.8 S, W 85-86 99.63 317.93 105.11Chev 2.8 S 87-89 116.23 326.54 97.09Chev 2.8 W 87-89 117.98 350.14 105.11Chev 2.8 X, 1 80-84 89.69 276.18 85.20Chev 2.8 X, 1 85-86 99.63 298.01 85.20Chev 2.8 S10 82-84 77.24 263.04 85.20Chev 2.8 S10 85 99.63 277.03 85.20Chev 2.8 S10 86 99.63 309.90 97.09Chev 2.8 S10 87-93 116.23 338.20 97.09Buick 3.0 E Carb 82-85 78.23 251.06 73.45Buick 3.0 L FI 85-86 97.74 326.71 105.51Buick 3.0 L 87-88 97.74 321.64 100.44Chev 3.1 D 90-94 132.86 363.70 93.23Chev 3.1 T 88-94 132.61 374.28 105.11Chev 3.1 V Turbo 89-90 132.61 377.76 105.11Buick 3.3 N 89-90 174.45 588.49 289.55 2Buick 3.3 N 91-93 174.45 622.95 324.01 2Chev 194 63-67 96.96 336.64 83.86Chev 200 78-79 45.61 307.14 82.66Buick 225 64-71 117.55 422.74 131.96 3Chev 229 80-84 97.85 239.49 82.66Chev 230 63-70 79.31 247.15 83.86Buick 3.8 A 79-85 85.19 236.29 73.45Buck 3.8 A 86-87 85.19 233.59 73.45Buick 3.8 B 86 97.74 281.51 100.44Buick 3.8 C 88-90 231.21 608.19 271.75 2Buick 3.8 L 90-92 222.81 656.36 325.43 2,3Buick 3.8 L 93-94 228.51 718.81 325.43 2,3,7Buick 3.8-3 78-85 85.19 236.29 73.45Buick 3.8-3 86-88 97.74 427.50 246.43Buick 3.8-7 Turbo 86-87 160.36 449.53 109.36 2

Engine FeetThe slickest, most versatile engine stand/dollyyou’ve ever seen. Strong enough to easily hold acomplete big block with accessories and transmis-sion attached. Made in the USA.1101 Small & Big Block Chevy . . . .$79.992201 Small Block Ford . . . . . . . . . .$84.992301 Big Block Ford 429, 460 . . . .$84.99

Moto Hat7 different carburetor mounting bolt pat-terns. Three engine lift chain openings sim-plify balancing of the engine assembly dur-ing lifting. Made of cad plated 3/16" steel,Moto Hat can support up to 1250 pounds.

68206 . . . . . . . . . . . . . . . . . .$21.99


PlastigageSPG1 .001, .003 SPR1 .002, .006 SPB1 .004, .009

Box of 12 . . . .$11.88

Rigid Cylinder HoneMicrometer headassures accuracy infeeding. Expandsquickly to cylindersize with fastaction rack and

pinion. Clip-on stones and wipers are easilychanged in a few seconds.15000 ......................................$139.99


En

gin

e K

its

10

General Motors Year Rering Master Cam NotesBuick 3.8-9 Turbo 84-85 131.95 412.94 109.36 2Chev 235 Truck Mech 56-62 145.09 464.15 151.96Chev 250 71-79 79.31 270.96 106.68Chev 250 80-84 85.38 285.85 115.49Buick 4.1-4 80-84 94.76 334.38 73.45Cad 4.1-8 82-87 184.10 542.53 92.55 2Olds 260 75-82 124.21 408.15 108.58Chev 4.3-Z Car 85-86 121.83 251.18 96.50Chev 4.3-Z Car Roller 87-93 117.88 396.71 242.04Chev 4.3 N, Z Truck 86 130.23 251.18 96.50Chev 4.3, Z Truck 87-92 130.23 396.71 242.04Chev 4.3, Z Truck 93-94 177.74 453.60 242.04 3Cad 4.5 V8 3, 5 88-90 249.33 828.60 366.44 2Chev 283 58-67 90.03 260.49 68.06Chev 292 6 Cyl 63-89 84.60 312.83 96.68Buick 300 64-67 171.11 564.20 164.98 3,7Pont 301 77-81 125.78 399.88 113.41Chev 305 V8 76-80 69.04 210.73 68.05Chev 305-E, Roller 88-92 97.11 494.96 303.63Chev 305-F 85-86 94.94 294.23 68.05Chev 305-F 87-92 94.94 489.63 303.63Chev 305, G 84-86 94.94 333.59 107.41Chev 305-G 87-88 94.94 298.75 107.41Chev 305-H Carb 81-84 75.95 217.65 68.05Chev 305-H Carb 85-88 94.94 296.39 68.05Chev 305-H Carb Roller 88 94.94 494.96 303.63Chev 305 7, S EFI 82 75.95 262.59 53.29Chev 305 Truck 81-84 75.95 217.65 68.05Chev 305 Truck 85-86 92.79 234.53 68.05Chev 305 Truck 87-92 94.94 259.39 68.05Chev 305 Truck 93-95 167.28 259.39 68.05Chev 307 68-73 73.09 252.73 53.29Olds 307 9, Y Hyd 80-85 115.25 377.85 109.04Olds 307 9, Y Roller 85-90 112.14 602.50 336.81Chev 327 Sm Journal 62-67 79.34 258.65 68.06Chev 327 Lrg Journal 68-69 62.41 221.49 53.29Olds 330 64-67 119.35 479.39 137.64Buick 350 68-71 111.33 538.40 179.64Buick 350 72-80 111.33 329.00 109.64Chev 350 Carb 69-85 62.41 154.99 53.29Chev 350-6 Carb Hyd 86 96.05 264.06 107.41Chev 350-6 Carb Roller 87-88 96.05 454.94 298.29Chev 350-7 Roller 89-93 152.76 600.14 303.63 2Chev 350-8 Roller 87-92 124.09 582.64 298.29Chev 350 K Truck, FI 87-95 108.86 232.16 55.26Chev 350 M Truck Carb 86-88 96.05 211.91 55.26Olds 350 R 68-80 124.21 373.71 109.04Pont 350 ex Ventura 68-71 129.00 480.78 107.45Pont 350 ex Ventura 72-77 129.56 489.83 115.94Chev 366 Truck 69-84 120.05 410.29 93.35 2,4Chev 366 Truck 85-90 120.05 413.19 93.35Chev 366 Truck 91-94 236.46 574.59 115.59 2,3,7Cad 368 80-84 185.34 707.15 171.91Chev 6.2 Diesel 82-91 269.90 980.30 427.79 2,4Chev 6.2 Diesel 92-93 344.18 1054.66 427.79 2,3,4Chev 6.5 Diesel 92-95 419.61 1270.54 427.79 2,3,4Chev 6.5 Turbo Diesel 92-93 421.51 1272.49 427.79 2,3,4Pont 389 60-66 194.14 595.89 107.45 3Chev 396 4-3/32 Bore 67-70 113.74 453.38 84.49Chev 400 70-80 94.05 254.18 55.26 4

General Motors Year Rering Master Cam NotesPont 400 2/B 67-79 140.51 436.46 107.45Pont 400 4/B 68-79 140.51 444.95 115.94Buick 401 62-66 286.26 781.35 187.93 3,7Chev 402 4-1/8 Bore 70-72 98.66 451.90 82.51Old 403 77-79 143.21 488.90 103.36Cad 425 77-79 176.71 698.29 171.91Old 425 ex Tornado 65-67 120.54 508.04 151.40Chev 427 Car 66-69 98.43 485.21 84.49Chev 427 Truck 68-85 174.61 597.03 93.35 2,4Chev 427 Truck 86-90 193.49 557.90 87.80 2,4Pont 428 ex Police 67-69 146.14 623.96 107.45 1Buick 430 67-69 179.89 635.38 194.59Chev 454 71-75 98.43 351.54 90.16Chev 454 76-85 102.39 347.88 82.51Chev 454 86-90 121.28 438.75 82.51Chev 454 91-93 214.09 536.06 92.46 2,3Buick 455 70-76 148.00 529.81 121.38Olds 455 68-76 120.54 581.34 122.80 1Pont 455 70-76 154.24 536.10 107.45Cad 472 68-74 174.43 768.68 171.91Cad 500 74-76 174.43 652.33 171.91Honda Year Rering Master Cam Notes1335CC EJ1 81 172.34 337.63 74.89 3,7,91488CC EM1 80-81 174.00 324.29 69.16 91751CC EK1 79-83 199.43 350.10 74.06 9IH Year Rering Master Cam Notes304-345 ex Scout 61-81 133.68 575.88 153.46392 w/Improv Cool 66-82 172.48 659.11 153.46 2MV404-MV446 ––––– 256.19 648.40 183.35 2,3,7Isuzu Year Rering Master Cam Notes1949CC 83-87 151.44 406.64 104.64 2,92254CC 86-93 224.55 484.06 102.58 3,2,7,9Mazda Year Rering Master Cam Notes1490CC E5 FWD 81-85 147.85 431.16 128.01 2,91970CC MA 79-84 118.90 383.55 113.35 2,9,71998CC FE 83-87 136.06 410.49 73.49 2,9Nissan Year Rering Master Cam Notes1952CC L20B 74-79 88.83 277.78 102.36 5,91974CC CA20E, S 82-88 178.35 611.76 272.91 2,3,52187CC Z22, E 81-83 120.19 360.21 104.94 2,9Toyota Year Rering Master Cam Notes1AC, 3AC 1452CC 81-88 161.36 326.96 75.85 3,92F 4230CC 75-10/1/84231.44 1019.78 544.94 32F 4230CC 10/2/84-87291.59 1081.45 544.94 33E, EE 1456CC 87-92 141.59 358.68 95.64 2,7,93YEC 1998CC 84-85 179.91 451.38 148.84 2,34AC, 4ALC 1587CC 83-88 140.66 319.76 75.85 2,920R 2189CC 75-80 139.61 390.24 126.78 3,5,922R, RE 2366CC 81-84 99.65 363.86 126.78 922RE, REC 2366CC 85-94 127.98 288.00 87.70 9,5

FlexhonesA flexible, self-centering, self-aligning, self-compensatingunbreakable honing device with long life and consistent finish.Globules of silicon carbide laminated to ends of hi-density nyloncreates a flexible hone which requires no set-up, does not get outof shape and most importantly, imparts a consistent perfect crosshatch for oil retention and instant ring seating.120 gritTGB400D 4" bore . . . . . . . . . . . . . . . . . . . . . . . .$62.99TGB413 41/8" bore . . . . . . . . . . . . . . . . . . . . . .$54.99TGB300D 3" bore . . . . . . . . . . . . . . . . . . . . . . . .$59.99TGB325D 3 1/4" bore . . . . . . . . . . . . . . . . . . . .$59.99TGB350D 3 1/2" bore . . . . . . . . . . . . . . . . . . . .$59.99TGB375 3 3/4" bore . . . . . . . . . . . . . . . . . . . . . .$54.99TGB414D 4 1/4" bore . . . . . . . . . . . . . . . . . . . .$84.99TBC138 1 3/8" bore (Brake Cylinders) . . . . . . . . .$19.99

Motor Assembly Grease • Perfect for Engine Assembly • 10 ounce tube C105 . . . . . . . . . . . . . . . . . . . . . . . .$2.99


Universal Cam Bearing ToolFor installing and removing cam bearings onmost cars and trucks. Range of 1.125” to 2.69"(28.58-68.3mm).

18000 . . . . . . . . . . . . . . .$142.99


En

gin

e K

its

11

454 Chevy Big Block (to 1985)

H661CP Hypereutectic Flattop PistonsE233K Sealed Power Moly RingsCB743P Clevite Rod BearingsMS829P Clevite Main Bearings1404M Federal Mogul Camshaft BearingsM77HV Melling Hi-Volume Oil Pump

Crane Energizer Cam & Lifter Kit of your choice9-1110SP Cloyes TRUE Roller Timing SetPE102R Freeze PlugsKS2618 FelPro Gasket Set

HP 454KH Hypereutectic Pistons . . . . . . . . . . . . . . . . .$470.38HP 454KHW With Crank . . . . . . . . . . . . . . . . . . . . . . . .$669.22

302 Ford (to 1982)

H273CP Hypereutectic Flattop PistonsE251K Sealed Power Moly RingsCB634P Clevite Rod BearingsMS590P Clevite Main BearingsSH510S Clevite Camshaft BearingsM68HV Melling Hi-Volume Oil Pump

Crane Energizer Cam & Lifter Kit of your choice9-1135 Cloyes TRUE Roller Timing SetPE108R Freeze PlugsKS2328 FelPro Gasket Set

HP 302KH Hypereutectic Pistons . . . . . . . . . . . . . . . . . . .$409.39

350 Chevy (to 1985 using 5.7 Rods)

H345NP Hypereutectic Flattop PistonsE251K Sealed Power Moly RingsCB663P Clevite Rod BearingsMS909P Clevite Main BearingsSH1349S Clevite Camshaft BearingsM55HV Melling Hi-Volume Oil Pump


HP 350KH Hypereutectic Pistons . . . . . . . . . . . . . . . . .$352.54HP 350KHW With Crank . . . . . . . . . . . . . . . . . . . . . . . . .$498.85

383 Chevy (350 Chevy using 400 Crank and 5.7 Rods)

H860CP Speed Pro Hypereutectic Flattop PistonsE251K Sealed Power Moly RingsCB663P Clevite Rod BearingsMS909P Clevite Main BearingsSH1349S Clevite Camshaft BearingsM55HV Melling Hi-Volume Oil Pump


HP 383KH Without crank . . . . . . . . . . . . . . . . . . . . . . . . .$458.10HP 383KHW Hypereutectic Pistons with new crank . . . . . .$656.91

Street Performance Engine Kits Include:Federal Mogul Hypereutectic Pistons, Sealed Power Moly Rings, Clevite Bearings, Melling H.

Volume Oil Pump, Crane Energizer Cam, Federal Mogul Lifters, Cloyes, True Roller Chain and Gear

Set, Fel-Pro Gaskets. Not Legal for Use or Sale in the State of California in Emission Controlled

Vehicles

*Performance Springs and Components Recommended

Adjustable Ring CompressorPutting the connecting rod through first, simply place the piston (withrings) into the tapered end of the ring compressor. Tighten the compres-sor snugly around the base of the piston. Then lay the compressor flat onthe engine cylinder bore.66766 4.000” - 4.090” Blue . . . . . . . . . . . . . . . . . . . . . . .$29.9966767 4.125” - 4.205” Gold . . . . . . . . . . . . . . . . . . . . . .$31.9966768 4.205” - 4.310” Red . . . . . . . . . . . . . . . . . . . . . . .$31.99

Piston RingInstallerTapered jaws to remove andinstall most passenger car andlight truck rings from 3/64" to1/4" (1.2-6.3mm)33500 ...............$4.99

360 Mopar Performance Kit (1971-1978)

H405P Speed Pro Hypereutectic Flattop PistonsE251K Sealed Power Moly RingsCB481P Clevite Rod BearingsMS1051P Clevite Main BearingsSH875S Clevite Camshaft BearingsM72HV Melling Hi-Volume Oil Pump

Crane Energizer Cam & Lifter Kit of your choice9-1103 Cloyes TRUE Roller Timing SetKS2109 FelPro Gasket Set

HP 360KH Without crank . . . . . . . . . . . . . . . . . . . . . . . . .$366.11

351W Ford (to 1983)

H336P Hypereutectic Flattop PistonsE251K Sealed Power Moly RingsCB831P Clevite Rod BearingsMS1432P Clevite Main BearingsSH510S Clevite Camshaft BearingsM72HV Melling Hi-Volume Oil Pump

Crane Energizer Cam & Lifter Kit of your choice9-1135 Cloyes TRUE Roller Timing SetPE108R Freeze PlugsKS2329 FelPro Gasket Set

HP 351WKH Hypereutectic Pistons . . . . . . . . . . . . . . . . . .$479.55

A thirty (.030) overbore 302 stroked to a 347 using the stock 302 28oz balancer and flywheel.SCAT Series 9000 3.400 stoke Crankshaft• Lightening holes on all rod throws• Shot peened for strength• Micro-polished journals• Chamfered oiling holes• SCAT Series 4340 Forged “I” Beam Rods • Hypereutectic pistons by KB1-347IPS-KB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$699.99

Scat’s Ford 347 Stroker kit

Performance ValveTrain and Cam KitsThe K-Kits include a High Energy,Magnum, or Extreme Energy cam, aset of High Energy hydraulic lifters,matched valve springs, steel retainers,valve locks, valve stem seals, a HighEnergy timing chain set, assembly lube,and instructions. Not Computer Compatible.

App/Part# Adv./Dur Dur @ .050 Lift PriceInt. / Exh. Int. / Exh. Int. / Exh.

Chevy 283-400K12-206-2 .260/.260 .212/.212 .440/.440 $279.99K12-210-2 .268/.268 .218/.218 .454/.454 $309.99K12-212-2 .280/.280 .230/.230 .480/.480 $309.99Chevy 396, 427, 454K11-205-3 .268/.268 .218/.218 .485/.485 $329.99K11-208-3 .280/.280 .230/.230 .520/.520 $349.99Ford 289-302, 351W with 302 firing orderK31-218-2 .268/.268 .218/.218 .456/.456 $329.99K31-226-3 .280/.280 .230/.230 .512/.512 $359.99

Xtreme 4x4 K-Kits Chevy 283-400K12-231-2 .250/.258 .206/.214 .432/.453 $299.99K12-235-2 .254/.262 .210/.218 .447/.462 $309.99

Xtreme 4x4 K-Kits Chevy 396-454K11-231-3 .254/.262 .210/.218 .505/.505 $324.99K11-235-3 .262/.270 .218/.226 .505/.515 $329.99

Performance Hydraulic Camshafts

Cam # Basic RPM Adv Dur Dur @ .050 Valve Lift Spring LifterInt./Exh. Int./Exh. Lobe Sep Int./Exh. Price set Price set Price

Chevrolet 262-400CS1014R 1500-4000 278/288 204/214 112 420/443 $54.99 VS739R $35.04 HT817 $39.84CS1013R 2000-4500 288/298 214/224 112 443/465 $59.99 VS739R $35.04 HT817 $39.84Chevrolet 396-502CS1088R 1500-4000 282/292 204/214 112 476/501 $72.99 VS1581 $85.92 HT817 $39.84CS1015R 2000-4500 292/302 214/224 112 501/527 $84.99 VS1581 $85.92 HT817 $39.84Ford 289-302CS1217R 1500-4000 280/290 204/214 112 448/472 $79.99 VS896R $49.60 HT900 $44.96CS1020R 2000-4500 290/300 214/224 112 472/496 $79.99 VS896R $49.60 HT900 $44.96Ford 351WCS1084R 1500-4000 280/290 204/214 112 448/472 $74.99 VS896R $49.60 HT900 $44.96CS1231R 2000-4500 290/300 214/224 112 472/496 $79.99 VS896R $49.60 HT900 $44.96Olds 350-400CS1024R 1500-4000 280/290 204/214 112 448/472 $74.99 VS896R $49.60 HT951 $47.84CS1023R 2000-4500 290/300 214/224 112 472/496 $79.99 VS896R $49.60 HT951 $47.84Pontiac 350-400CS1038R 1500-4000 278/288 204/214 110 420/443 $74.99 VS890R $71.52 HT951 $47.84CS1022R 2000-4500 288/298 214/224 112 443/465 $79.99 VS890R $71.52 HT951 $47.84

Dual Energy Cam & Lifter KitsThe split profile design provides good low end torque with a strongemphases on mid-range power. Great for RV or towing vehicles. Kit includescam, lifters, and assembly lube. Not Computer Compatible.

Part# Adv Dur Lift RPM PriceInt. Exh. Int. Exh.

Small Block ChevyCL12-208-2 265 269 .442 .465 1500-5700 $169.99CL12-209-2 275 277 .462 .482 2000-6000 $169.99

Big Block ChevyCL11-204-3 265 272 .476 .507 1500-5700 $174.99CL11-209-3 275 283 .507 .531 2000-6000 $174.99

Small Block FordCL31-409-3 265 273 .472 .486 1600-5700 $175.99CL31-418-3 275 280 .477 .510 2200-6000 $175.99

Ford 429, 460CL34-226-4 265 275 .484 .510 1500-5700 $189.99CL34-330-4 275 285 .515 .541 2000-6000 $189.99

Due to Volitility of Valve Lifters, Prices Are Subject to Change To order Call Toll Free 1.800.831.0884

Cam

shaft

s, V

alv

etr

ain

& A

ccess

ori

es

12

Part # RPM Adv. Duration Lift PriceInt/Ex Int/Ex

Small Block Chevy 81-95114102 idle-3500 244/254 .378/.401 $152.99114112 1000-4000 254/264 .401/.423 $152.99114122 1500-4500 264/274 .423/.446 $152.99

Big Block Chevy 94-Earlier134112 1200-4200 262/270 .468/.485 $169.99134122 1600-4600 270/278 .485/.502 $169.99

Chevy 2.8/3.1 V6 81-89 TBI254112 1000-4000 258/264 .401/.423 $169.99254122 1500-4500 264/274 .423/.423 $169.99

Ford Small Block 88-95 Non H.O.364112 1000-4000 252/260 .416/.432 $169.99

Chrysler 318-360 86-91694101 1000-4000 250/240 .407/.384 $299.99

Most Compu Cams are 50 State Emissions Legal. Ask Salesperson for Details.

Compu Cams KitDesigned to get maximum power and perform-ance from computer equipped cars and trucks.Works with the computer, not against it! Thesehydraulic cam kits come with Crane lifters andassembly lube.

Computer Compatible CamsPart # RPM Adv. Duration Lift Price

Int/Ex Int/ExChevy 305-350TBI 12-388-4 1000-5000 252/260 .425/.440 $115.99TPI 12-314-4 1200-5200 260/260 .444/.444 $115.99LT1* 07-304-8 1000-5000 266/276 .500/.510 $239.99LS1* 54-412-11 1200-6000 265/271 .522/.529 $399.99*Roller Lifters


Cam

shafts, V

alv

etra

in &

Acce

ssorie

s

13

Tire Smokin’ Horsepower!Crane PowerMax® Dual-PatternCams & ComponentsDual-pattern designs for maximum horsepower, torque, RPM and response! Dyno-tested andproven. Crane’s finest, most-powerful, cams! Many are designed for nitrous-oxide systems, superchargersand turbos. Comes with Crane’s best anti pump-up performance hydraulic lifters. Match with Cranesprings and retainers for maximum HP, RPM and reliability!

Crane PowerMax® Cam & Lifter Kits: $157.99 (All apps. listed below)

Cam&Lifter Basic RPM Adv Dur Dur @ .050 Deg Lobe Lift Valve SpringKit Int/Exh Int/Exh Separation Int/Exh Springs Price Retainers PriceChev V-8, 262-400113902 1500-4500 260/272 204/216 112 .427/.454 99848-16 $66.99 99915-16 $52.99113932 2000-5000 266/272 210/216 114 .440/.454 99848-16 $66.99 99915-16 $52.99113942 2000-5000 272/284 216/228 112 .454/.480 99848-16 $66.99 99915-16 $52.99Chevy V-8, 396-454133802 2200-5200 278/290 222/234 114 .529/.525 99839-16 $66.99 99948-16 $54.99133902 1500-4500 260/272 204/216 112 .485/.515 99839-16 $66.99 99948-16 $54.99133942 2000-5000 272/284 216/228 112 .515/.510 99839-16 $66.99 99948-16 $54.99Ford V-8, “385” Series, 370-460-514353902 1500-4500 260/272 204/216 112 .487/.518 99837-16 $66.99 99944-16 $54.99353932 1600-4600 266/274 210/218 114 .487/.504 99837-16 $66.99 99944-16 $54.99353942 2000-5000 272/284 216/228 112 .518/.513 99837-16 $66.99 99944-16 $54.99Ford V-8, 221-302 (Non-H.O.)363802 2200-5200 278/290 222/234 114 .498/.527 99833-16 $66.99 99944-16 $54.99363902 1500-4500 260/272 204/216 112 .456/.484 99833-16 $66.99 99944-16 $54.99363942 2000-5000 272/284 216/228 112 .484/.512 99833-16 $66.99 99944-16 $54.99Oldsmobile V-8, 260-455803902 1500-4500 260/272 204/216 112 .456/.484 99833-16 $66.99 99944-16 $54.99804542 2000-5000 272/284 216/228 112 .484/.512 99833-16 $66.99 99944-16 $54.99804552 2500-5500 284/292 222/230 110 .480/.496 99833-16 $66.99 99944-16 $54.99Pontiac V-8, 265-455283803 2200-5200 278/290 222/234 114 .467/.494 99840-16 $66.99 99944-16 $54.99283952 2500-5500 288/296 226/234 114 .458/.473 99840-16 $66.99 99944-16 $54.99


Crane Energizer® cams deliver big gains in horsepower, torque, RPM and response! Excellent“HP-Per-Dollar” value for serious street performance. Comes with Crane Cams’ performance hydrauliclifters. Match with Crane valve springs and retainers for maximum HP, RPM and reliability!

Crane Energizer® Cam & Lifter Kits: Only $109.99 (All apps. listed below)

Cam&Lifter Basic RPM Adv Dur Dur @ .050 Deg Lobe Lift Valve SpringKit Int/Exh Int/Exh Separation Int/Exh Springs Price Retainers PriceChev V-8, 262-400100032 1200-4200 260/260 204/204 110 .427/.427 99848-16 $66.99 99915-16 $52.99100042 1600-4600 266/266 210/210 110 .440/.440 99848-16 $66.99 99915-16 $52.99100052 2000-5000 272/272 216/216 110 .454/.454 99848-16 $66.99 99915-16 $52.99100172 2200-5200 274/274 218/218 106 .450/.450 99848-16 $66.99 99915-16 $52.99100132 2400-5400 278/278 222/222 110 .467/.467 99848-16 $66.99 99915-16 $52.99100082 2500-5500 282/282 226/226 106 .470/.470 99848-16 $66.99 99915-16 $52.99100072 3000-6000 284/284 228/228 112 .480/.480 99848-16 $66.99 99915-16 $52.99100182 3200-6200 286/286 230/230 106 .465/.465 99848-16 $66.99 99915-16 $52.99100112 3500-6500 302/302 246/246 106 .500/.500 99848-16 $66.99 99915-16 $52.99Chev V-8, 396-502103032 1200-4200 260/260 204/204 110 .484/.484 99839-16 $66.99 99948-16 $54.99103042 1600-4600 266/266 210/210 110 .499/.499 99839-16 $66.99 99948-16 $54.99103052 2000-5000 272/272 216/216 110 .515/.515 99839-16 $66.99 99948-16 $54.99103072 2500-5500 282/282 226/226 108 .533/.533 99839-16 $66.99 99948-16 $54.99103062 3000-6000 284/284 228/228 112 .544/.544 99839-16 $66.99 99948-16 $54.99Chrysler, Plymouth, Dodge “LA” V-8 273-360150052 2000-5000 272/272 216/216 110 .454/.454 99835-16 $66.99 99948-16 $54.99150062 3000-6000 284/284 228/228 112 .480/.480 99835-16 $66.99 99948-16 $54.99Ford V-8, 289-302-WILL NOT FIT H.O.130032 1200-4200 260/260 204/204 110 .456/.456 99833-16 $66.99 99944-16 $54.99130042 1600-4600 266/266 210/210 110 .469/.469 99833-16 $66.99 99944-16 $54.99130052 2000-5000 272/272 216/216 110 .484/.484 99833-16 $66.99 99944-16 $54.99130092 2400-5400 278/278 222/222 110 .498/.498 99833-16 $66.99 99944-16 $54.99130062 3000-6000 284/284 228/228 112 .512/.512 99833-16 $66.99 99944-16 $54.99Ford V-8, Boss 351, 351C, 351M, 400133032 1600-4600 266/266 210/210 110 .508/.508 99837-16 $66.99 99944-16 $54.99133042 2000-5000 272/272 216/216 110 .524/.524 99837-16 $66.99 99944-16 $54.99133132 2400-5400 278/278 222/222 110 .539/.539 99837-16 $66.99 99944-16 $54.99133052 3000-6000 284/284 228/228 112 .554/.554 99893-16 $99.99 99944-16 $54.99Ford V-8 352-428134042 1600-4600 266/266 210/210 110 .516/.516 99837-16 $66.99 99957-16 $54.99134052 2000-5000 272/272 216/216 110 .533/.533 99837-16 $66.99 99957-16 $54.99Pontiac V-8, 350-455105072 2000-5000 272/272 216/216 110 .454/.454 99840-16 $66.99 99944-16 $54.99105082 3000-6000 284/284 228/228 112 .480/.480 99840-16 $66.99 99944-16 $54.99

Crane Energizer® Single-Pattern Cam Kits &Components

High Energy Cam Series (Not Computer Compatible)

252H Series - 252° DurationDesigned for small cubic inch engines. A great OEM replacement cam withmore low end torque and better gas mileage than stock.260H Series - 260° DurationOur recommendation for tow vehicles and family sedans looking for greattorque and throttle response with a smooth idle.268H Series - 268° DurationComps most versatile cam. If its performance you want from your small blockor towing with your big block this is the cam! A daily driver with a choppyidle.

Magnum Cam Series (Not Computer Compatible)

270H Series - 270° DurationA great cam for HP street machines. Has a rough idle in small blocks and anoticeable idle in big blocks, yet it will work with your power accessories andstock converter. Use with aftermarket manifold and 4BBL carb.280H Series - 280° DurationDesigned for serious street machines. We recommend the use of aftermar-ket converter, manifold, and four barrel carb. Has a rough idle.292H Series - 292° DurationThe 292H is a street/strip cam. It has a definite rough idle. B&M convertershould be used. 305H Series - 305° DurationThe 305 was ground for pro street and bracket racers. The advanced com-puter design delivers consistent E.T.’s.

High Energy CamsApplication Part# Duration Lift

Int. Exh. Int. Exh. PriceAMC V8

10-201-4 260 260 .447 .447 $122.9910-202-4 268 268 .456 .456 $122.99

Buick 350 c.i.92-200-4 252 252 .439 .439 $122.9992-202-4 260 260 .454 .454 $122.9992-203-4 268 268 .469 .469 $122.99

Small Block Chevy12-205-2 252 252 .425 .425 $89.9912-206-2 260 260 .440 .440 $89.9912-210-2 268 268 .454 .454 $89.99

Big Block Chevy11-202-3 252 252 .460 .460 $99.9911-203-3 260 260 .475 .475 $99.9911-205-3 268 268 .485 .485 $99.99

Small Block Chrysler20-208-2 252 252 .425 .425 $94.9920-210-2 260 260 .440 .440 $94.9920-212-2 268 268 .454 .454 $94.99

Big Block Chrysler21-212-4 252 252 .425 .425 $122.9921-213-4 260 260 .440 .440 $122.9921-215-4 268 268 .454 .454 $122.99

Ford 289, 30231-215-2 252 252 .433 .433 $89.9931-216-2 260 260 .447 .447 $89.9931-218-2 268 268 .456 .456 $89.99

Ford 351W35-215-3 252 252 .433 .433 $102.9935-216-3 260 260 .447 .447 $102.9935-218-3 268 268 .456 .456 $102.99

Ford 351C, 351M, 40032-218-3 252 252 .468 .468 $99.9932-219-3 260 260 .484 .484 $99.9932-221-3 268 268 .494 .494 $99.99

Ford 352, 360, 390, 427, 42833-224-3 268 268 .494 .494 $99.99

Ford 429, 46034-224-4 252 252 .468 .468 $116.9934-225-4 260 260 .484 .484 $116.9934-227-4 268 268 .494 .494 $116.99

Olds V842-227-4 252 252 .433 .433 $122.9942-228-4 260 260 .447 .447 $122.9942-229-4 268 268 .456 .456 $122.99


Cam

shaft

s, V

alv

etr

ain

& A

ccess

ori

es

14

Lifters Price Valve Springs Price Retainers Price

822-16 $84.99 940-16 $76.99 744-16 $48.99822-16 $84.99 940-16 $76.99 744-16 $48.99

869-16 $85.99 910-16 $79.99 N/A869-16 $85.99 910-16 $79.99 N/A869-16 $85.99 910-16 $79.99 N/A

812-16 $74.99 980-16 $41.99 742-16 $48.99812-16 $74.99 980-16 $41.99 742-16 $48.99812-16 $74.99 981-16 $55.99 742-16 $48.99

812-16 $74.99 911-16 $76.99 744-16 $48.99812-16 $74.99 911-16 $76.99 744-16 $48.99812-16 $74.99 911-16 $76.99 744-16 $48.99

822-16 $84.99 901-16 $60.99 744-16 $48.99822-16 $84.99 901-16 $60.99 744-16 $48.99822-16 $84.99 901-16 $60.99 744-16 $48.99

822-16 $84.99 926-16 $78.99 744-16 $48.99822-16 $84.99 926-16 $78.99 744-16 $48.99822-16 $84.99 926-16 $78.99 744-16 $48.99

832-16 $79.99 942-16 $58.99 743-16 $48.99832-16 $79.99 942-16 $58.99 743-16 $48.99832-16 $79.99 942-16 $58.99 743-16 $48.99

832-16 $79.99 942-16 $58.99 743-16 $48.99832-16 $79.99 942-16 $58.99 743-16 $48.99832-16 $79.99 942-16 $58.99 743-16 $48.99

832-16 $79.99 940-16 $76.99 743-16 $48.99832-16 $79.99 940-16 $76.99 743-16 $48.99832-16 $79.99 940-16 $76.99 743-16 $48.99

834-16 $79.99 940-16 $76.99 744-16 $48.99

832-16 $79.99 940-16 $76.99 743-16 $48.99832-16 $79.99 940-16 $76.99 743-16 $48.99832-16 $79.99 940-16 $76.99 743-16 $48.99

852-16 $79.99 901-16 $60.99 743-16 $48.99852-16 $79.99 901-16 $60.99 743-16 $48.99852-16 $79.99 901-16 $60.99 743-16 $48.99

Competition Cams Matched Lifters, Valve Springs and RetainersValve springs are one of the most critical and most overlooked components inyour engine. They must be matched to your cam in order for the engine toreach it’s full potential. Its useless to install a high RPM camshaft if you do nothave the correct springs. The use of the wrong valve springs is one of themost common causes of camshaft failure. Below are the matched lifters, valvesprings and retainers.

Pro Cam Lube

152 4 ounce bottle $4.99153 8 ounce bottle $6.99

Cam and Lifter Lube

(4 oz. bottle)

55-400 $2.99 each



Cam

shafts, V

alv

etra

in &

Acce

ssorie

s

15

ValveLifters Price Springs Price Retainers Price

822-16 $84.99 926-16 $78.99 740-164 $48.99822-16 $84.99 926-16 $78.99 740-164 $48.99867-16 $84.99 986-163 $81.99 740-164 $48.99

812-16 $74.99 981-16 $55.99 742-16 $48.99812-16 $74.99 981-16 $55.99 742-16 $48.99858-16 $79.99 986-163 $81.99 740-164 $48.99858-16 $79.99 986-163 $81.99 740-164 $48.99813-16 $79.99 981-16 $55.99 742-16 $48.99813-16 $79.99 986-163 $81.99 740-164 $48.99813-16 $79.99 986-163 $81.99 740-164 $48.99

812-16 $74.99 911-16 $79.99 748-164 $48.99812-16 $74.99 911-16 $79.99 748-164 $48.99858-16 $79.99 924-163 $98.99 741-164 $48.99858-16 $79.99 924-163 $98.99 741-164 $48.99813-16 $79.99 911-16 $79.99 748-164 $48.99813-16 $79.99 924-163 $98.99 741-164 $48.99813-16 $79.99 924-163 $98.99 741-164 $48.99

822-16 $84.99 901-16 $60.99 747-164 $48.99822-16 $84.99 901-16 $60.99 747-164 $48.99867-16 $84.99 995-163 $92.99 740-164 $48.99867-16 $84.99 995-163 $92.99 740-164 $48.99

822-16 $84.99 911-16 $79.99 748-164 $48.99822-16 $84.99 911-16 $79.99 748-164 $48.99867-16 $84.99 924-163 $98.99 741-164 $48.99867-16 $84.99 924-163 $98.99 741-164 $48.99

832-16 $79.99 942-16 $58.99 747-164 $48.99832-16 $79.99 942-16 $58.99 747-164 $48.99862-162 $79.99 986-163 $81.99 740-164 $48.99862-162 $79.99 986-163 $81.99 740-164 $48.99

832-16 $79.99 972-16 $86.99 747-164 $48.99832-16 $79.99 972-16 $86.99 747-164 $48.99862-162 $79.99 924-163 $98.99 741-164 $48.99862-162 $79.99 924-163 $98.99 741-164 $48.99

834-16 $79.99 926-16 $78.99 747-164 $48.99834-16 $79.99 926-16 $78.99 747-164 $48.99834-16 $79.99 924-163 $98.99 747-164 $48.99834-16 $79.99 924-163 $98.99 747-164 $48.99

832-16 $79.99 926-16 $78.99 747-164 $48.99832-16 $79.99 926-16 $78.99 747-164 $48.99832-16 $79.99 924-163 $98.99 741-164 $48.99862-162 $79.99 924-163 $98.99 741-164 $48.99

832-16 $79.99 942-16 $58.99 747-164 $48.99832-16 $79.99 942-16 $58.99 747-164 $48.99862-162 $79.99 986-163 $81.99 740-164 $48.99862-162 $79.99 986-163 $81.99 740-164 $48.99

852-16 $79.99 995-163 $92.99 740-164 $48.99852-16 $79.99 995-163 $92.99 740-164 $48.99863-162 $89.99 995-163 $92.99 740-164 $48.99863-162 $89.99 995-163 $92.99 740-164 $48.99

852-161 $79.99 995-163 $92.99 740-164 $48.99852-161 $79.99 995-163 $92.99 740-164 $48.99863-162 $89.99 995-163 $92.99 740-164 $48.99863-162 $89.99 995-163 $92.99 740-164 $48.99

Magnum CamsApplication Part# Duration Lift

Int. Exh Int. Exh. PriceAMC V8

10-203-4 270 270 .480 .480 $122.9910-204-4 280 280 .490 .490 $122.9910-210-4 292 292 .518 .518 $122.99

Small Block Chevy12-211-2 270 270 .470 .470 $89.9912-212-2 280 280 .480 .480 $89.9912-213-3 292 292 .501 .501 $99.9912-214-4 305 305 .525 .525 $112.9912-223-4* 282 282 .495 .495 $112.9912-224-4* 294 294 .525 .525 $112.9912-225-4* 306 306 .555 .555 $112.99*Mechanical

Big Block Chevy11-207-3 270 270 .510 .510 $99.9911-208-3 280 280 .520 .520 $99.9911-213-3 292 292 .550 .550 $99.9911-214-4 305 305 .575 .575 $112.9911-218-4* 282 282 .561 .561 $114.9911-219-4* 294 294 .595 .595 $114.9911-220-4* 306 306 .629 .629 $114.99*Mechanical

Small Block Chrysler20-214-4 270 270 .470 .470 $114.9920-232-4 280 280 .480 .480 $114.9920-243-4 292 292 .501 .501 $114.9920-244-4 305 305 .525 .525 $114.99

Big Block Chrysler21-306-4 270 270 .470 .470 $122.9921-237-4 280 280 .480 .480 $122.9921-242-4 292 292 .501 .501 $122.9921-243-4 305 305 .525 .525 $122.99

Small Block Ford31-414-3 270 270 .501 .501 $99.9931-226-3 280 280 .512 .512 $99.9931-330-3 292 292 .534 .534 $99.9931-331-4 305 305 .540 .540 $112.99

Ford 351C, 351M, 40032-224-4 270 270 .519 .519 $114.9932-225-4 280 280 .530 .530 $114.9932-234-4 292 292 .560 .560 $114.9932-235-4 305 305 .585 .585 $114.99

Ford 352, 360, 390, 427, 42833-226-4 270 270 .519 .519 $114.9933-230-4 280 280 .530 .530 $114.9933-240-4 292 292 .560 .560 $114.9933-241-4 305 305 .585 .585 $114.99

Ford 429, 46034-229-4 270 270 .519 .519 $114.9934-331-4 280 280 .530 .530 $114.9934-336-4 292 292 .560 .560 $114.9934-337-4 305 305 .585 .585 $114.99

Ford 302 H.O. 351W35-414-3 270 270 .500 .500 $99.9935-226-3 280 280 .512 .512 $99.9935-330-3 292 292 .518 .518 $99.9935-331-4 305 305 .540 .540 $112.99

Olds V842-308-4 270 270 .501 .501 $122.9942-231-4 280 280 .490 .490 $122.9942-236-4 292 292 .518 .518 $122.9942-237-4 305 305 .540 .540 $122.99

Pontiac V851-233-4 270 270 .470 .470 $114.9951-234-4 280 280 .480 .480 $114.9951-240-4 292 292 .501 .501 $114.9951-241-4 305 305 .525 .525 $114.99

Degree Wheel KitIncludes everything needed to degree your camshaft.

66787 . . . . . . . . . . . . . . . . . . . . . .$89.99

Camshaft InstallationHandle Chevy V8 andV666897 . . . . . . . . . . . . . . . . . . . . .$23.99

Footnotes 1. 265-301 use 864-16 2. Adjustable valve train required 3. Requires machining on cylinder heads 4. 10° Lock angle


Comp’s Xtreme EnergyTM CL KitsThe “Cam & Lifter Kit” includes an XtremeEnergyTM Cam, decals and instructions.Not Computer Compatible.

Xtreme Energy CamsComp Cams new Xtreme Energy seriestakes full advantage of current valve trainconfigurations along with the latest devel-opments in camshaft lobe designs to pro-vide the most response and power everavailable. These new cams utilize short-ened seat timing, tighter lobe separationangles, more area at high lift, more dura-tion at .020" tappet lift and more maxi-mum lift. Turns all of this into more power!

Small Block Chevy HydraulicDuration @.050" Lift

Part# Int. Exh. Int Exh. RPM Range Price12-234-2 212 218 .447 .454 1000-5200 $96.9912-238-2 218 224 .462 .469 1300-5600 $96.9912-242-2 224 230 .477 .480 1600-5800 $96.9912-246-3 230 236 .487 .490 1800-6000 $102.9912-250-3 240 246 .507 .510 2300-6500 $102.9912-254-3 250 256 .519 .523 2800-7000 $102.99Use Lifters 812-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.99

Small Block Chevy Hydraulic Roller 87 & Newer With OE Roller*Requires thrust button and wear plate08-408-8 206 212 .480 .487 1000-5000 $239.9908-412-8 212 218 .487 .495 1200-5200 $239.9908-422-8 218 224 .495 .502 1600-5400 $239.9908-423-8 224 230 .502 .510 1900-5600 $239.9908-433-8 236 242 .520 .540 2500-6000 $239.9908-443-8 242 248 .540 .562 2800-6100 $239.9908-444-8 248 254 .562 .580 3200-6200 $239.99Use Lifters 850-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$179.99

Small Block Chevy Retro Fit Hydraulic Roller*Requires thrust button and wear plate12-412-8 212 218 .487 .495 1200-5200 $239.9912-422-8 218 224 .495 .502 1600-5400 $239.9912-423-8 224 230 .502 .510 1900-5600 $239.9912-432-8 230 236 .510 .520 2200-5800 $239.9912-433-8 236 242 .520 .540 2500-6000 $239.9912-443-8 242 248 .540 .562 2800-6100 $239.9912-444-8 248 254 .562 .580 3200-6200 $239.99Use Lifters 853X-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$419.99Use Pushrods 7809-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99

Big Block Chevy Hydraulic11-230-3 206 212 .470 .475 600-4800 $99.9911-234-3 212 218 .480 .485 1000-5200 $99.9911-242-3 224 230 .515 .520 1600-5800 $99.9911-246-3 230 236 .552 .555 1800-6000 $99.9911-250-3 240 246 .574 .578 2300-6500 $99.9911-254-4 250 256 .588 .593 2800-7000 $119.99Use Lifters 812-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.99

Big Block Chevy Hydraulic Roller *Requires thrust button and wear plate11-408-8 206 212 .510 .510 1000-5000 $239.9911-413-8 212 218 .510 .510 1200-5200 $239.9911-422-8 218 224 .510 .510 1600-5400 $239.9911-423-8 224 230 .510 .510 1900-5600 $239.9911-433-8 236 236 .521 .540 2500-6000 $239.9911-443-8 246 248 .540 .560 2800-6100 $239.9911-444-8 248 254 .560 .580 3200-6200 $239.99Use Lifters 854X-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$419.99


Cam

shaft

s, V

alv

etr

ain

& A

ccess

ori

es

16

[email protected]" LiftPart# Int. Exh. Int Exh. RPM Range Price

Small Block Chevy HydraulicCL12-234-2 212 218 .447 .454 1000-5200 $169.99CL12-238-2 218 224 .462 .469 1300-5600 $169.99CL12-242-2 224 230 .477 .480 1600-5800 $169.99CL12-246-3 230 236 .487 .490 1800-6000 $175.99CL12-250-3 240 246 .507 .510 2300-6500 $175.99CL12-254-3 250 256 .519 .523 2800-7000 $175.99

Big Block Chevy HydraulicCL11-230-3 206 212 .470 .475 600-4800 $175.99CL11-234-3 212 218 .480 .485 1000-5200 $175.99CL11-242-3 224 230 .515 .520 1600-5800 $175.99CL11-246-3 230 236 .552 .555 1800-6000 $175.99CL11-250-3 240 246 .574 .578 2300-6500 $175.99CL11-254-4 250 256 .588 .593 2800-7000 $189.99

Ford 289-302CL31-230-3 206 212 .460 .474 600-4800 $179.99CL31-234-3 212 218 .477 .484 1000-5200 $179.99CL31-242-3 224 230 .509 .512 1600-5800 $179.99CL31-250-4 240 246 .541 .544 2300-6500 $196.99

Chrysler 273-360CL20-221-3 212 218 .447 .445 1000-5200 $175.99CL20-223-3 224 230 .477 .480 1600-5800 $179.99CL20-225-4 240 246 .507 .510 2300-6500 $189.99

* We recommend NOT using stock springs on any aftermarket camDue to Volitility of Valve Lifters, Prices Are Subject to Change

Big Time TorqueThese cams are designed just for 4x4’s. These cams will give you tremendous offidle torque, great throttle response and big torque throughout the operatingrange. Not Computer Compatible.

Duration @ .050" Lift PricePart # Int. Exh. Int. Exh. Each RPM Springs PriceChevrolet 262-40012-231-2 206° 214° .432 .453 $96.99 600-4600 981-16 $55.9912-235-2 210° 218° .447 .462 $96.99 1000-5200 981-16 $55.9912-239-3 218° 226° .462 .480 $99.99 1300-5600 981-16 $55.9912-243-3 226° 234° .480 .498 $99.99 1800-6000 981-16 $55.99Chevrolet 396-45411-231-3 210° 218° .505 .505 $99.99 1000-5000 911-16 $76.9911-235-3 218° 226° .505 .515 $99.99 1200-5400 911-16 $76.9911-239-3 226° 234° .544 .564 $99.99 1600-5800 924-16(2)$98.9911-243-4 234° 244° .564 .570 $117.992000-6200 924-16(2)$98.99Ford 351W35-231-3 206° 214° .448 .483 $99.99 1000-5000 942-16 $58.9935-235-3 210° 218° .477 .493 $99.99 1200-5200 942-16 $58.9935-239-3 218° 226° .493 .512 $99.99 1400-5500 986-16(2)$81.9935-243-4 226° 234° .512 .531 $117.991600-5800 986-16(2)$81.99Ford 429-46034-231-4 210° 218° .505 .505 $117.991000-5000 926-16 $78.9934-235-4 218° 226° .505 .515 $117.991400-5600 926-16 $78.9934-239-4 226° 234° .544 .564 $117.991600-5800 924-16(2)$98.9934-243-5 234° 244° .564 .570 $139.992000-6200 924-16(2)$98.99

(2) Requires machining on heads Lifters Sold Seperate


Cam

shafts, V

alv

etra

in &

Acce

ssorie

s

17

Small Block Chevy Valves“Race-flo” one-piece stainless steel valves. “Race-flo” Series valves have an undercutthat reduces the stem diameter in the combustion chamber and gives up to 40%flow increase.

Your Cost (set of 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.00Part Head Stem Installed O/A Tip Top of WGT.No. Type Dia. Dia. Height Length Length Head Grams

11521-8 exh 1.500 .3415 Stock 4.911 .250 7° dish 8911565-8 exh 1.600 .3415 Stock 4.911 .250 7° dish 9411522-8 int 1.940 .3415 Stock 4.911 .250 7° dish 10711566-8 int 2.020 .3415 Stock 4.911 .250 7° dish 11311568-8 int 2.055 .3415 Stock 4.911 .250 7° dish 115

Valve LappersFor hand lapping valves. Thick, hardwood handles foreasy lapping. 21100 has 1-1/8" and 1-3/8" diameter cupsfor larger valves. 21200 has 5/8" and 13/16" diametercups for smaller valves.

21100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.9921200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99

Small Block ChevyV1199 1.50" Exhaust . . . . . . . . . . . .$2.99V1926 1.94" Intake . . . . . . . . . . . . .$3.99V1927 1.72" Intake . . . . . . . . . . . . .$2.99Big Block ChevyV1911 1.72" Exhaust . . . . . . . . . . . .$5.99V1912 2.065" Intake . . . . . . . . . . . .$4.99

Ford 302V1961 1.5" Exhaust . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99V1932 1.78" Intake 70-78 . . . . . . . . . . . . . . . . . . . . . .$3.99V2045 1.78" Intake 80-87 . . . . . . . . . . . . . . . . . . . . . .$3.99Ford Truck 360-390V1853 1.558" Exhaust . . . . . . . . . . . . . . . . . . . . . . . . .$4.99V1809 2.03" Intake . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99Small Block Chevy Swirl-Polished ValvesV4231 1.60" Exhaust . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99V1756 2.02" Intake . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.99Small Block ChryslerV2029 1.50" Exhaust . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99V1722 1.78" Intake . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.99Big Block ChryslerV1900 1.74" Exhaust . . . . . . . . . . . . . . . . . . . . . . . . . .$6.99V1386 2.08" Intake . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99Complete Line of Valves Available!

Pioneer Heat-Treated 7°Valve LocksSS555HD 11/32" valve stem . . . . . . . . . . . . . . . . . . .$6.99SS613HD 3/8" valve stem . . . . . . . . . . . . . . . . . . . . .$6.99

Pioneer Valve Oil SealsSmall Block Chevy

OS240B-1000 “O-Ring Style” per 1000 . . . . . . . . . . .$20.00OS450-100 “Umbrella Type” per 100 . . . . . . . . . .$18.00

Valve Stem LocksPrice Per Each Set. Single groove design. Stamped steellocks 7°. For street and mild performance applications.

99041-1 11/32" Single groove (Copper) . . . . .$8.9999042-1 3/8" Single groove (Blue) . . . . . . . . . .$8.99

1 Piece StainlessSteel Street ValvesQuality stainless forged valves. All streetstainless valves use single keeper grooves togive greater tip strength. Requires Cranesingle valve stem locks. (Per Set of 8)Small Block Chevy45600-8 1.94" Intake . . . . . .$76.0045605-8 2.02" Intake . . . . . .$80.0045610-8 1.50" Exhaust . . . . .$80.0045615-8 1.60" Exhaust . . . . .$88.00Big Block Chevy45620-8 2.065" Intake . . . . .$88.00

45625-8 2.19" Intake . . . . . . . . . . . . . . . . . . . . . . . . . . .$88.0045630-8 1.725" Exhaust . . . . . . . . . . . . . . . . . . . . . . . . .$88.0045635-8 1.88" Exhaust . . . . . . . . . . . . . . . . . . . . . . . . .$88.00Chrysler Small Block45640-8 2.02" Intake . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.0045645-8 1.60" Exhaust . . . . . . . . . . . . . . . . . . . . . . . . .$98.00Chrysler Big Block45650-8 2.08" Intake . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.0045655-8 1.74" Exhaust . . . . . . . . . . . . . . . . . . . . . . . . .$98.00Ford 289-30245660-8* 1.78" Intake . . . . . . . . . . . . . . . . . . . . . . . . . .$98.0045665-8* 1.46" Exhaust . . . . . . . . . . . . . . . . . . . . . . . . .$98.00Ford 351-W45662-8** 1.84" Intake . . . . . . . . . . . . . . . . . . . . . . . . .$98.0045667-8** 1.54" Exhaust . . . . . . . . . . . . . . . . . . . . . . . .$98.00Ford 351-C45670-8 2.19" Intake . . . . . . . . . . . . . . . . . . . . . . . . . . .$88.0045675-8 1.71" Exhaust . . . . . . . . . . . . . . . . . . . . . . . . .$98.00429/460 (70-72 SCJ)45680-8 2.25" Intake . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.00429/460 (68-72)45681-8 2.19" Intake . . . . . . . . . . . . . . . . . . . . . . . . . . .$88.0045685-8 1.725" Exhaust . . . . . . . . . . . . . . . . . . . . . . . . .$98.00Oldsmobile45690-8 2.07" Intake . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.0045695-8 1.71" Exhaust . . . . . . . . . . . . . . . . . . . . . . . . .$98.00

* For use with non rail, adjustable rockers only **For use with non adjustable rail rockers only

Small Block Chevy Valves“Street Master” stainless valves. Feature chrome stems, hard wafer tips, swirl polishedunderhead areas and fully machined combustion faces.

Your Cost (set of 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.00Part Head Stem Installed O/A Tip Top of WGT.No. Type Dia. Dia. Height Length Length Head Grams

10777-8 exh 1.500 .3415 Stock 4.911 .250 10° dish 9610749-8 exh 1.600 .3415 Stock 4.911 .250 10° dish 10110776-8 int 1.940 .3415 Stock 4.911 .250 6° dish 10510750-8 int 2.020 .3415 Stock 4.911 .250 6° dish 109

Permatex Valve GrindingCompoundAids valve grinding and seating operations to removeburrs, surface defects, carbon, gum and corrosion.Can be used for lapping and grinding chromium.Mixes with water to form an easy-to-use paste. 3ounce tube

80037 . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.99

10° Valve Stem Locks611-16 11/32" with lash cap . . . . . . . . . . .$18.99612-16 3/8" with lash cap . . . . . . . . . . . . .$18.99613-16 11/32" without lash cap . . . . . . . .$18.99

Top End Kit


Cam

shaft

s, V

alv

etr

ain

& A

ccess

ori

es

18

The Top End Kit offers a complete package of push rods, rocker arms, rocker arm ballsand nuts per engine. Each kit is convenientlypackaged to save you time and money.

TEK-302 68-78 302 Ford truck, cast using rails . . . . . . . . . .$74.99TEK-401 76-90 305-350 Chevy truck, non roller

and not self aligning stamped steel . . . . . . . . . . . .$35.99TEK-460 72-89 460 Ford truck . . . . . . . . . . . . . . . . . . . . . .$74.99TEK-504 70-90 454 Chevy truck, 1.72 ratio

stamped steel stock . . . . . . . . . . . . . . . . . . . . . . .$79.99TEK-507 70-90 454 Chevy truck, 1.72 ratio

stamped steel long slot . . . . . . . . . . . . . . . . . . . .$94.99TEK-548 78-88 302 Ford truck, stamped steel . . . . . . . . . . .$99.99Others Available • Call for your Specific Application

Hot “Stock Diameter”Valve SpringsMade for Small Block Chevy camshafts with upto .585" gross valve lift.99846-16 Set of 16 . . . . .$119.99

Conical ValveSpring Kit

For Small Block Chevy with up to .500" lift cam. These springs are for highperformance street applications where the heads are not removed andmachined for larger springs. 50 state legal. Kit includes: 16 Conical springs, 16 Steel retainers, 16 11/32" Valve locks and 16 11/32" Umbrella seals.

982-KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$114.99

Hydraulic Lifter PullerRemoves stuck hydraulic valve lifters. Expanding colletfirmly grips the tightest lifters. Special designed slidehammer jars the lifter loose.

13750 . . . . . . . . . . . . . . . . . . . . .$23.99

Valve Spring CompressorMakes compressing the spring and removing the keep-

ers a simple job because there is no need to remove

the head. Adjustable cam action. Fast because there is

no need to re-adjust the tool after each spring.

16750 . . . . . . . . . . . . . . . . . . . . .$20.99

Valve Spring CompressorExceptionally strong, rigid frame, weighs only 6 lbs.Works with nearly all valve-in head and L-headengines as well as truck and tractor engines.44300 . . . . . . . . . . . . . . . . . . . . .$52.99

Small Block Chevy Valve SpringsRV880X Stock . . . . . . . . . . . . . . . . . . . . .$.99 each

RV943X Performance to .490" lift . . . . .$1.99 each

Chrome-Moly SteelHardened Spring RetainersVSR7000R Small Block Chevy . . . . . . . .$2.99 each

Valve Spring and Retainer Kits11308-1 Chevrolet V8 1967-87 262 thru 400 C.I.D. (up to .500 lift)

13308-1 Chevrolet V8 1965-93 396 thru 454 C.I.D. (up to .580 lift)

28308-1 Pontiac V8 265-455 (up to .478 lift)

35308-1 Ford V8 351C, 351M, 400 1979-82 (up to .558 lift)

(requires 11/32" single groove locks)

36308-1 Ford/Mercury V8 1962-87 221 thru 302 C.I.D.

and 69-93 351 Windsor (up to .527 lift)

52308-1 Ford 1970-77 351C-400

(requires 3/8" multi groove locks)

69308-1 Chrysler “LA” 273-360 1969-91 (up to .494 lift)

Each Set . . . . . . . . . . . . . . . . . . . . . . . . .$99.99

Small Block Chevy Valve SpringsVS677 S/B Chevy Stock . . . . . . . . .$1.49 each

VS739R S/B Chevy up to .480 lift . .$2.99 each

PIONEER INC Performance Head KitEverything you need to rebuild your small block Chevyhead. Chrome moly retainer, hardened 11/32" valvelocks, 3/8" screw in stud, positive type valve seal andstock diameter valve spring. (Requires 2 kits per cylinder)HK1 Handles up to .490 lift . . . . . . . . . .$5.99HK2 Handles up to .550 lift . . . . . . . . . .$7.99

SHOP OUR WEBSITE FORMORE GREAT ITEMS!


Cam

shafts, V

alv

etra

in &

Acce

ssorie

s

19

Guide PlatesThese guideplates from Competition Cams are necessary in high RPMmotors. They keep your pushrods in line with your lifter cups and rockerarms. The guide plates are hardened to prevent them from wearing prematurely.

4800-8 Small Block Chevy (raised), 5/16" pushrod . . . . . .$19.994802-8 Small Block Chevy (raised), 3/8" pushrod . . . . . . .$19.99

4804-8 Ford 351C (raised), 3/8" pushrod . . . . . . . . . . . . . . . . . . . . . .$39.994806-8 Big Block Chevy (raised), 3/8" pushrod . . . . . . . . . . . . . . . . . .$34.994808-8 Small Block Chevy (flat), 5/16" pushrod . . . . . . . . . . . . . . . . . .$15.994810-8 Small Block Chevy (flat,) 3/8" pushrod . . . . . . . . . . . . . . . . . . .$15.994816-8 Small Block Ford (flat), 5/16" pushrod . . . . . . . . . . . . . . . . . . .$19.994818-8 Small Block Ford (flat), 3/8" pushrod . . . . . . . . . . . . . . . . . . . .$19.994838-8 Ford 429/460 (raised), 3/8" pushrod . . . . . . . . . . . . . . . . . . . .$39.99

High Energy PushrodsOne very common problem encountered when rebuildingan engine is that the old pushrods have worn and the tipsare no longer compatible with the seats in the new rockerarms. This will definitely cause premature pushrod androcker arm failure. Competition Cams’ solution to this prob-

lem is their High Energy Pushrod. It has a ground ball that is hardened and welded,which will perfectly mate with either a High Energy or Magnum Rocker Arm. Used together tops off the perfect engine.

Part# Application For Use Dia. Pricew/Guideplates

AMC7812-16 V8 290-401, most 1970-up Yes 5/16" $25.99Buick7861-16 V8 350, 1970-81 No 5/16" $30.997896-16 V8 455, 1970-76 No 5/16" $30.997869-12 V6 All, 1962-85 No 5/16" $19.99Chevrolet7861-12 6 Cyl. 194-250, 1962-84 No 5/16" $23.997816-12 V6 173 (60°), 1980-86 Yes 5/16" $23.997812-12 V6 200-262, 78-86, hardened

replacement Yes 5/16" $19.997808-16 V8 262-400 w/OE Hyd.

Rlr Cam 87-present Yes 5/16" $30.997809-16 S/B Chevy for Retro fit Roller Yes 5/16" $30.997812-16 V8 262-400, 1955-present w/flat tappet Yes 5/16" $25.997811-8 V8 396-454, intake-hardened replacementYes 3/8" $20.997881-8 V8 396-454, exhaust-hardened

replacement Yes 3/8" $20.997854-16 V8 396-454, 1965-86, 7811

int., 7881 exh. Yes 3/8" $38.99Chrysler7864-12 6 Cyl. 198-225, 1960-80 w/

mechanical cam No 5/16" $23.997820-16 V8 273-360, 1964-86 w/ non adj. rockersNo 5/16" $30.997840-16 V8 440, 1968-78 w/ non adjustable

rockers No 5/16" $30.99Ford7865-12 6 Cyl. 170-200, 1965-83 No 5/16" $23.997866-12 6 Cyl. 240-300, 1965-84 No 5/16" $23.997836-12 V6 171 (2800cc), 1974-86 No 5/16" $23.997831-16 V8 255 & 302, 1965-present w/

flat tappet Yes 5/16" $23.997826-16 V8 302 w/OE Hyd. Roller Cam 85-presentYes 5/16" $30.997835-16 V8 351W, 1969-78 No 5/16" $25.997832-16 V8 351C & Cobra Jet, 1970-74 No 5/16" $25.997837-16 V8 351M & 400M, 1971-79 No 5/16" $25.997833-16 V8 352-428, 1965-72 No 5/16" $26.997834-16 V8 429-460, 1972-78 No 5/16" $26.99Oldsmobile7842-16 V8 260-403, 1971-79 Yes 5/16" $26.997845-16 V8 400-455, 1971-79 Yes 5/16" $39.99Pontiac7851-16 V8 350-455, 1955-79 Yes 5/16" $26.99

One-Piece ChromeMoly Push Rods

66891C Chevy Small Block 1-Piece Push Rods .$59.995/16" Hardened for Use w/ Guide Plates

66892C Chevy Small Block 1-Piece Push Rods .$67.995/16" Hardened for Use w/ Guide Plates.

.100" Longer than Stock.

Hi-Tech PushrodsToughest pushrods available. One-piece pushrods with an .080" wallthickness and power formed from 4130 chrome-moly, then heat-treat-ed for even more strength. These pushrods are perfect for race appli-cation including roller camshaft applications!

Small Block Chevy

7972-16 Standard Length 5/16" . . . . . . . . . . . . . . . .$124.997993-16 +.100", 5/16" . . . . . . . . . . . . . . . . . . . . . . .$126.997994-16 +.150", 5/16" . . . . . . . . . . . . . . . . . . . . . . .$129.997913-16 Standard Length 3/8" . . . . . . . . . . . . . . . . .$149.997984-16 +.100", 3/8" . . . . . . . . . . . . . . . . . . . . . . . .$149.99

Big Block Chevy

7954-16 Standard Length 3/8" Intake and Exhaust . .$138.997962-16 Standard Length 7/16" Intake and Exhaust . .$214.99

FIREBALL® PerformancePushrodsCrane Fireball performance pushrods are perfect for street perform-ance applications. Most applications are heat-treated indicated by“HT”.

Chevrolet

11660-16 55-87 V8 262 - 400, 5/16" HT . . . . . . . . .$26.9913660-16 65-90 V8 396 - 454, 5/16" HT . . . . . . . . .$38.99Ford/Mercury

36660-16 63-68 V8 221-302, 5/16" HT . . . . . . . . . .$32.9936661-16 69-86 V8 255-302, 5/16" HT . . . . . . . . . .$26.99Pontiac

28660-16 67-79 V8 350-455, 5/16" HT . . . . . . . . . .$27.99

Small Block ChevyGuide PlatesMR1896 . . . . . . . . . . . . .$1.99 each

Screw-in StudsMR1910RS 7/16" . . . . .$1.99 each

MR1862RS 3/8" . . . . . .$2.99 each

5/16” Chrome Moly PushrodsRP3212R . . . . . . . . . . . .$3.99 ea

Small Block Chevy PushrodsRP5015R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$.99 ea

Box 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.00See Bulk Sales Page

Easily check concentricity to discard any power-robbing,bent push rods; insert pushrod between spring-loaded holders, spin the pushrod, and read the re-positionable dial indicator. Dial indicator 6692 included.

66979 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.99

Universal Push Rod Straightness Checker

Sure-Lock Rocker Arm NutsDesigned to keep the rocker arms positively locked for precise andcritical valve train adjustments. Manufactured from quality gradesteel, then heat-treated for extra strength and plated with a durable

finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Part Shank StudFor Stock Rocker Arms No. O.D. Size PriceChevrolet 283-400 Small Block, Pontiac V8 &Ford 289-302-351, gold tone finish . . . . . . . .920G . . .603" 3/8" . . .$24.99Chevrolet 396-454 Big Block & Pontiacheavy-duty, bright zinc finish . . . . . . . . . . . . .921G . . .670" 7/16" . .$29.99For Aluminum Rocker ArmsChevrolet 283-400 Small Block, Pontiac V8 &Ford 289-302-351 (ex 351C), gold tone finish .923G . . .540" 3/8" . . .$29.99Chevrolet 396-454 Big Block & Pontiacheavy-duty, black finish . . . . . . . . . . . . . . . . .924G . . .544" 7/16" . .$34.99


Cam

shaft

s, V

alv

etr

ain

& A

ccess

ori

es

20

Energizer Roller Rocker ArmsAll Listed Applications Only . . . . . . . . . . . . . . . . . . . . . .$171.99

Chevrolet V8 262-400 1955-8711744-16 1.5 ratio, 3/8" stud (standard) 11745-16 1.5 ratio, 7/16" stud11746-16 1.6 ratio, 3/8" stud 11747-16 1.6 ratio, 7/16" stud

Chevrolet V8 396-454 1965-9013744-16 1.7 ratio, 7/16" stud (standard)

Ford/Mercury V8 351C,BOSS 302-351,351M,400 1969-82/370-460,1968-9413744-16 1.7 ratio, 7/16" stud (standard)(Requires screw-in rocker studs and guideplates or use Pt. No. 52655-16)

Pontiac V8 265-455 1955-81 with straight 7/16" rocker arm studs28747-16 1.65 ratio, 7/16" stud (standard)

By Crane Cams ExtrudedAluminum RollerRockers• Precision machined and heat treated• Roller tip, needle bearing fulcrum• Complete with adjusting nut• Not for self-aligning heads

Small Block Chevy3060 1.5 ratio, 3/8" stud . . . . . . . . . . . . . . . . . . . . . .$169.993061 1.6 ratio, 3/8" stud . . . . . . . . . . . . . . . . . . . . . .$199.993062 1.5 ratio, 7/16"stud . . . . . . . . . . . . . . . . . . . . . .$199.993063 1.6 ratio, 7/16" stud . . . . . . . . . . . . . . . . . . . . .$199.99Big Block Chevy3064 1.7 ratio, 7/16" stud . . . . . . . . . . . . . . . . . . . . .$209.99(Use Pt. No. 99152-16 conversion stud set for Gen V and Gen VI 454-502 V8)

Small Block Ford 289, 302 or 351 W3065 1.6 ratio, 3/8" stud . . . . . . . . . . . . . . . . . . . . . .$199.99(Requires screw-in rocker studs and guideplates or use Pt. No. 36655-16 conver-sion kit)Stamped Steel Rocker Arms

Chevrolet V8 262-400 1955-87(Not to use with valve springs over 1.520” O.D.)Non Self-Aligning11800-16 1.5 Ratio, 3/8" stud. . . . . . . . . . . . . .$66.9911801-16 1.5 Ratio, 3/8" stud. Long Slot . . . . . . .$77.99

11802-16 1.6 Ratio, 3/8" stud. Extra Long Slot . . . . . . . . . . . . . . . . . .$85.99Chevrolet V8 396-454 1965-90(Not to use with valve springs over 1.560" O.D.) (up to .560" lift)13800-16 1.7 Ratio, 7/16" stud . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99

Magnum Roller TipRocker Arms

The secret is the rocker’s stiffer design and super-accurate ratios thatgive you effective valve lift. Up to 30% more horsepower over stock.

60° Chevy V6 173 c.i.1413-12 10mm stud . . . . . . . . . . . . . . . . . . . . . . . . .$110.99Small Block Chevy1412-16 1.5 ratio, 3/8" stud . . . . . . . . . . . . . . . . $132.991416-16*• 1.6 ratio, 3/8" stud . . . . . . . . . . . . . . . . . .$139.99* 50 State Legal• May require machine work to cylinder head

Big Block Chevy1411-16 1.72 ratio, 7/16" stud . . . . . . . . . . . . . . . . . .$145.99Small Block Ford (1968-89 Rail-Type)1431-16 1.6 ratio, 3/8" stud (use with 4504-16 studs) .$141.99Oldsmobile1442-16 1.6 ratio, 3/8" stud . . . . . . . . . . . . . . . . . . . .$149.99Pontiac1451-16 1.52 ratio, 7/16" stud . . . . . . . . . . . . . . . . . .$149.99

Pro Magnum Roller Rocker ArmsThe Pro Magnum roller rocker arm combines the strength of 4340chrome-moly steel and the light weight of aluminum rockers. CompCam took advantage of computer design to simulate the stresses thataffect the rocker under various operating loads. This results in a rockerarm that is strong and weighs 5% less at the valve than comparablealuminum.

Small Block Chevy1301-16 1.52 ratio, 3/8" stud . . . . . . . . . . . . . . . . . . .$258.991302-16 1.6 ratio, 3/8" stud . . . . . . . . . . . . . . . . . . . .$259.991304-16 1.52 ratio, 7/16"stud . . . . . . . . . . . . . . . . . . .$259.991305-16 1.6 ratio, 7/16" stud . . . . . . . . . . . . . . . . . . .$259.99Big Block Chevy1320-16 1.7 ratio, 7/16" stud . . . . . . . . . . . . . . . . . . .$259.99Ford 289-302-351W1331-16 1.6 ratio, 3/8" stud . . . . . . . . . . . . . . . . . . . .$259.991332-16 1.6 ratio, 7/16" stud . . . . . . . . . . . . . . . . . . .$259.99

Extruded Aluminum Gold Rockers• CNC machined and heat treated extruded aluminum• Roller tip, needle bearing fulcrum• Complete with adjusting nut

10750-16* S/B Chevy center bolt valve cover1.50 ratio 3/8" stud . . . . . . . . . . . . . .$299.99

11750-16* S/B Chevy 1.50 ratio 3/8" stud . . . . . .$249.9913750-16* B/B Chevy 1.70 ratio 7/16" stud . . . . .$264.99*Not for self-aligning heads

Roller Tip RockersS/B Chevrolet 1955-87R-840RS 1.5 Ratio, 3/8” Stud (Set of 16) . . . . . . . . . . .$104.99R-840SPRS 1.6 Ratio, 3/8” Stud (Set of 16) . . . . . . . . .$109.99R-1840RS 1.5 Ratio, 7/16” Stud (Set of 16) . . . . . . . . .$169.99R-1840SPRS 1.6 Ratio, 7/16” Stud (Set of 16) . . . . . . .$179.99B/B Chevrolet 1965-90R-868RS 1.72 Ratio, 7/16” Stud (Set of 16) . . . . . . . . .$134.99Ford 302 & 351W 1978-98R-889RS Stock Ratio (Set of 16) . . . . . . . . . . . . . . . . . .$134.99

Long Slot Rocker ArmsS-1025 S/B Chevy 1.5 ratio, 3/8" stud . .$4.99 ea

S-1025SP S/B Chevy 1.6 ratio . . . . . . .$5.99 ea

Stamped Steel FactoryReplacementRK346X S/B Chevy 1.5 ratio, 3/8" stud .$2.99 ea

PIONEER Inc

Stamped Roller-Tipped Long SlotRocker ArmsProvides a roller tip to reduce friction and wear at the valve stem tipand an extra-long slot to eliminate rocker-to-stud interference whenusing high-lift cams. Each set includes 16 stamped roller rockers, 16anti-gall grooved balls and 16 lock nuts.66906C Small Block Chevy 1.5 Ratio 3/8" Stud . .$79.99

Adjustable RockerArms for ChryslerSupplied with hardened shaft andhardware.

66869 1.5 Ratio for S/B* . . . . . . . . . . . . . . . . . . . .$229.99*66418C Pushrod Must Be Used . . . . . . . . . . . . . . . . .$79.99

66868 1.5 Ratio for B/B* . . . . . . . . . . . . . . . . . . . .$229.99*66419C 383-400 Pushrod Must Be Used . . . . . . . . . .$79.99*66421C 413-440 Pushrod Must Be Used . . . . . . . . . .$79.99

Cam

shafts, V

alv

etra

in &

Acce

ssorie

s

21

Extruded Aluminum Roller-Rocker ArmsRace proven! Precision machined to insure consistency and ratio accuracy. Set of 16 including 16 poly locks.Fits S/B Chevy Only.

66907C 1.5 Ratio 3/8" stud . . . . . . .$139.9966908C 1.6 Ratio 3/8" stud . . . . . . .$139.9966909C 1.5 Ratio 7/16" stud . . . . . .$139.9966910C 1.6 Ratio 7/16" stud . . . . . .$139.9966914C 1.5 Self Align . . . . . . . . . . .$189.9966915C 1.6 Self Align . . . . . . . . . . .$189.9966920C 1.5/1.6 Ratio 3/8" stud . . . .$149.99

Aluminum StudGirdlesProform stud girdles reduce flex and partbreakage. Each set comes with alu-minum stabilizers and either 3/8" or7/16" poly locks.

Chevy Small Block 66950 For use with 3/8" stud . . . . . . . . . . . . . . . . . . . . . . .$84.9966951 For use with 7/16" stud . . . . . . . . . . . . . . . . . . . . .$89.99

Proform’s Newest Combo Deal Here’s the ultimate in affordability: long-slot rocker set 66905 iscombined with stock pushrods with welded tips (not cheappress fits), hardened for use with or without guideplates, madewith high-strength, black-oxide coated 1010 steel. Fits S/BChevy pre-85.66923C . . . . . . . . . . . . . . . . . . . . . . .$59.99

It’s important to protect your hands while working in the garage or at the track. Nothing protects better than Mechanix Wear Gloves.The padded, 3-ply mesh gloves have a 3/4-closed design so you can move your hands freely, plus an elastic wristband and velcro closure band.

MG-05-009 Original Black - Medium . . . .$19.49MG-05-010 Original Black - Large . . . . . .$19.49MG-05-011 Original Black - X-Large . . . . .$19.49

MG-02-009 Original Red - Medium . . . . .$19.49MG-02-010 Original Red - Large . . . . . . .$19.49MG-02-011 Original Red - X-Large . . . . . .$19.49

MG-03-009 Original Blue - Medium . . . . .$19.49MG-03-010 Original Blue - Large . . . . . . .$19.49MG-03-011 Original Blue - X-Large . . . . . .$19.49

MG-71-009 Original Camo - Medium . . . .$19.49MG-71-010 Original Camo - Large . . . . . .$19.49MG-71-011 Original Camo - X-Large . . . .$19.49

MMP-05-009 M-pact Black - Medium . . . .$34.99MMP-05-010 M-pact Black - Large . . . . . .$34.99MMP-05-011 M-pact Black - X-Large . . . . .$34.99

DEI-08-009 DEI #8 Red & Black - Medium . .$29.99DEI-08-010 DEI #8 Red & Black - Large . . . .$29.99DEI-08-011 DEI #8 Red & Black - X-Large . .$29.99

HMS-24-009 HMS #24 Blue & Red - Medium $29.99HMS-24-010 HMS #24 Blue & Red - Large .$29.99HMS-24-011 HMS #24 Blue & Red - X-Large $29.99

MG-05-902 17” Heat Sleeve Pair . . . . . . .$21.69

Mechanix Wear Gloves

Exterior Mounted See-Thru Window Graphic• Added UV protection for vehicle interiors• Helps keep interiors cool• Added security• Personalize your vehicle• Car wash safe

This material allows you to customize the glass surface of a vehicle and still have a virtually unobstructed view to the outside world! Sized to fit most pick-up rear windows. Pressure sensitive adhesive allows dry application. No messy water. Easy installation allows custom fitting for many light truck applications. Reduces UV rays up to 75%. Keeps prying eyes from viewing vehicle contents.

10005 Checkered Flag

10004 American Iron 10006 Dragster Blowout 10023 Wolves

10026 Sizzlin Hot Flames10007 Stars & Stripes

10014 Trophy Bass

10017 Mexican Flag

10025 The Patriot . . .$69.99

$69.99


Cam

shaft

s, V

alv

etr

ain

& A

ccess

ori

es

22

S/R Small Block ChevyBrand New, High Strength Castings, All Small Block Chevy Heads from 1962-present are coveredFeatures:

• Hardened steel exhaust seats• Extra thick decks and walls• Universal 7-bolt exhaust flange • Cast iron for Small Block Chevy.

043600 76cc 1.940" x 1.500" valves with 11/32" guides043610 67cc 1.940" x 1.500" valves with 11/32" guides

Head KitIncludes 1.94" and 1.5" Federal Mogul valves, valve springs, chrome-moly retainers,screw-in studs, locks and umbrella valves seals.HK194FM completes two heads . . . . . . . . . . . . . . . . . . . . . . .$103.20HK194SM completes two heads (with stainless steel valves) Up to .490 lift $206.41HK194SM-2 completes two heads (with stainless steel valves) Up to .550 lift $228.74

S/R Torquer Bare CastingsAccepts 2.020 x 1.600 Valves, Choice of 67cc or 76cc Chambers

Features:• Screw in Rocker Arm Studs• Unleaded Fuel Compatible• Accepts both early and late model valve covers and accessories• Small Block Chevy V8 Cast Iron Cylinder Heads.

Includes hardened steel exhaust seats, 3 angle valve job, all mounting surfaces aremachined, drilled and tapped. Heads are ready for assembly. Does not include anyparts.

Runner Chamber ValvePart# Material Volume Volume Sizes Price042660 Cast Iron 171cc 67cc 2.020" x 1.600" $249.99 each042670 Cast Iron 171cc 76cc 2.020" x 1.600" $244.99 each

Head KitIncludes Manley stainless steel swirl polished 2.02" and 1.6" valves, valve springs,chrome-moly retainers, hardened locks, screw-in studs and umbrella valve seals.

HK202SM completes two heads. Up to .490 lift . . . . . .$190.24HK202SM-2 completes two heads. Up to .550 lift . . . . .$215.35

Windsor Jr. 5.0 Ford (Bare)

Power Without Machining!58cc Fast Burn Combustion Chambers

Features:• Screw-in rocker studs• Small Block Ford 289-302/351W Cast Iron

Includes hardened steel exhaust seats, 3 angle valve job, all mountingsurfaces are machined, drilled and tapped. Heads are ready for assembly.Does not include any parts.

Runner Chamber ValvePart# Material Volume Volume Sizes053030 Cast Iron 171cc 58cc 1.940" x 1.600"Head KitIncludes Manley stainless steel swirl polished 1.94" and 1.6" valves, Cranesprings and retainers, hardened locks, screw-in studs and umbrella valveseals.HK302SM completes two heads up to .527 lift . . . . . . .$242.20

Sportsman IIFeatures:

• Angled or straight spark plug location• Fully machined raised valve cover rails with early and late model bolt patterns• Hardened steel exhaust seats• Extra thick deck surfaces• Multi-angle valve job• Integral valve guides• Dual 1.250" and 1.550" spring pads• Accepts screw-in rocker arm studs and pushrod guideplates Small Block Chevy

V8 Cast Iron Cylinder Heads.Runner Chamber Valve Spark Plug

Part# Material Volume Volume Sizes Boss011150 Cast Iron 200cc 64cc 2.020" x 1.600" Angled Plug011250 Cast Iron 200cc 64cc 2.020" x 1.600" Straight Plug012150 Cast Iron 200cc 72cc 2.020" x 1.600" Angled Plug012250 Cast Iron 200cc 72cc 2.020" x 1.600" Straight Plug

Head KitIncludes Manley stainless steel swirl polished 2.02" and 1.60" valves, valve springs,chrome-moly retainers, hardened locks, screw-in studs and umbrella valve seals.HK202SM completes two heads. Up to .490 lift . . . . . . . . . . . .$190.24HK202SM-2 completes two heads. Up to .550 lift . . . . . . . . . . .$215.35

S/R 2.9 Ford V6Features: • 97 cc intake runners • 43 cc combustion chambers • 1.657" x 1.419" valves size • 50 State legalEngineered from the ground up the decks and walls are reinforced for years ofcrack free service. Sealing surfaces are machined to eliminate the possibility of leaks.To make things simple this head is fully compatible with all OE valvetrain compo-nents.052900 (Bare) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$166.99 each

Hi-Tech, Low-Cost Power$275.99 each

$239.99 each

$289.99 each

#053030

Performer & Performer RPM Heads

These street high-performancecylinder heads offer out of thebox, bolt-on performance withno additional porting required.All Performer and PerformerRPM heads are assembled withthese high-quality components:Stainless steel,one-piece swirl-polished intake and exhaustvalves with under-cut stems; 2-ring positive oil control seals;rocker studs; hardened steelguide plates; valve springs,retainers and keepers. Performerheads have provisions for allexhaust emissions related com-ponents and are street legal,while the Performer RPM headsare for non-emission vehicles.Edelbrock Performer andPerformer RPM heads are thecenterpiece of the EdelbrockTotal Power Package. MatchPerformer heads with Performer

intakes and Performer RPM heads with Performer RPM manifolds for anoutstanding performance combination. Edelbrock carburetors andcamshafts complete the “no guesswork” Power Package.

Small Block Chevy Performer60759 PRE-87 70cc . . . . . . . . . . . . .each $519.9960909 PRE-87 64cc . . . . . . . . . . . . .each $489.9960859 87-95 60cc (centerbolt) . . . . .each $569.99Performer RPM (PRE-87)60719 angle plug 70cc . . . . . . . . . . . . .each $479.9960739 straight plug 70cc . . . . . . . . . . . . .each $479.9960899 straight plug 64cc . . . . . . . . . . . . .each $489.99Big Block Chevy Performer RPM60479 oval port 110cc . . . . . . . . . . . . .each $859.9960559 rectangle port 118cc . . . . . . . . . . . . .each $859.99SB Chrysler Performer RPM60779 67-85 63cc . . . . . . . . . . . . .each $659.99

60759

60719

60899

60559

BB Merlin Heads World Products Merlin BB Chevy Oval port bare heads Made from HighDensity Cast Iron with Hardened steel exh. And Integral int. Valve Seats that Machined for 1.550 springs The Valve Guides are also IntegralThese Oval port 269cc Open chamber heads are ready for 3/8 dia.Valves that are 2.190" x 1.880"Merlin heads Also offer• Exclusive RightCast@ technology assures optimum accuracy for the

True D-Shaped exhaust ports• Accepts all Mark. IV. Vale train components & accessories• Machined surfaces for superior sealing• #073010 head bolts required (8 longer than stock) 030040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$449.99


Cam

shafts, V

alv

etra

in &

Acce

ssorie

s

23

Complete Heads

S/R Small Block ChevyIncluded in Assembly: Manley Street Flo stainless steel valves (1-pieceforged, with undercut stems and swirl-polished heads), ring and bandvalve seals, valve springs, Manley 7° chrome moly retainers and keepers.

Chamber ValvePart# Material Volume Sizes043610-1 Cast Iron 67cc 1.94" x1.50" $369.99 ea.

Sportsman IIIncluded in Assembly: Manley Street Flo stainless steel valves (1pieceforged, with undercut stems and swirl-polished heads), ring and band-style valve seals, 1.250" valve springs, Manley 7° chrome moly retainers,keepers and pushrod guide plates.

Chamber Valve Spark PlugPart# Material Volume Sizes Boss011150-1Cast Iron 64cc 2.020"x1.600" Angled Plug$399.99 ea.

S/R TorquerIncluded in Assembly: Manley Street Flo stainless steel valves (1-pieceforged, with undercut stems and swirl-polished heads), ring and bandvalve seals, valve springs, Manley 7° chrome moly retainers and keepers.

Chamber Valve Spark PlugPart# Material Volume Sizes Boss042660-1Cast Iron 67cc 2.020" x 1.600" Straight$379.99 ea.

Roush 180 Included in Assembly: Manley Street Flo stainless steel valves (1-pieceforged, with undercut stems and swirl-polished heads), ring & band sytlevalve seals, 1.250" valve springs, Manley 7° chrome moly retainers, keep-ers, screw in rocker arm studs and pushrod guide plates

Chamber valvePart# Material Volume Sizes053030-1Cast Iron 58cc 1.940" x 1.600" $399.99 ea.

Merlin Big Block Chevy Included in Base Assembly: Manley Street Flo stainless steel valves (1-pieceforged, with undercut stems and swirl-polished heads), ring and bandvalve seals, 1.550" valve springs, Manley 7° chrome moly retainers, keep-ers and pushrod guide plates.

Intake Runner ValvePart# Material Type/Volume Sizes030620-1* Cast Iron Rect./310cc 2.190 x 1.880" $619.99 ea.030040-1* Cast Iron Oval/269cc 2.190 x 1.880" $619.99 ea.

*832015-8 Head Bolts: 8 longer than stock required $28.99

S/R 2.9 Ford V6Included in Assembly: OEM replacement steel valves, umbrella style valveseals, valve springs, OEM steel retainers and keepers.

Chamber ValvePart# Material Volume Sizes052900-1Cast Iron 43cc 1.657" x 1.419" $299.99 ea.

#043610-1

Professional SandblastCabinet,smallIncludes blasting gun with trigger, 2 ceramicnozzles and 1 steel nozzle, dust collector port,hopper and screen, and rubber gloves. StrongVDC light illuminates intricate work. Workingarea 19.5" x 29" x 12" with a view window of29" x 12".67589 . . . . . . . . . . . . . . . . . . . .$109.99

20-Gallon PartsWasherRugged welded steel construction and con-venient removable work shelf make this amust-have in every engine shop! Comes withself-latching fuse linked fire cover and partsbasket for small parts.67590 . . . . . . . . . . . . . . . . . . . .$129.99

Magnetic Parts TrayNever lose another bolt with the PROFORMstainless steel magnetic parts tray. Strongmagnet with protective rubber cover and pol-ished tray. Please visit "How To Buy" to findyour PROFORM Tools dealer today!67591 . . . . . . . . . . . . . . . . . . . .$12.99

Adjustable Work Table CartHeavy-Duty work surface supports up to 200lbs. Mobile cart allows you to keep smallparts within reach. Four swivel casters, holesfor tools, and easy-turn knob for heightadjustment.67592 . . . . . . . . . . . . . . . . . . . .$69.99

Rod ViseHolding connecting rods securely withoutdamaging them is necessary for removing orinstalling rod bolts, beam polishing or machin-ing. This aluminum vise is designed for allsizes of aluminum or steel rods, and can holdseveral at once. It will mount in a bench viseor can be permanently mounted.66769 . . . . . . . . . . . . . . . .$79.99

6” Dial CalipersEnsure accurate measurements with this jeweled dialvernier caliper. It reads .100" per complete revolutionand will read to .0005". Caliper comes complete withcarrying case.

4908 6" Dial Caliper . . . . . . . . . . . . . .$44.99

Pioneer Inc.Harmonic BalancerRepair SleeveOther applications available.

HB4121 Small Block Chevy . . . . .$4.99 ea

Cra

nksh

aft

s &

Con

nect

ing R

ods

24

H Series Performance Engine BearingsClevite 77 “H” Series. “H” Series bearings have a medium level of eccentricity, high crush, and rod bearings have a hardenedsteel back and thin overlay. These bearings also have enlarged chamfers for greater crankshaft fillet clearance and are madewithout flash plating for better seating. Use “H” Series bearings with crankshafts that have oversize fillets and where enginesrun in medium to high RPM range.Chevrolet Rod Sizes Each Main Sizes Set

Bearings Bearings

350 5.7L (67-95) CB663H Std .001, .010, .020 $5.99 MS-909H Std .001, .010, .020 $41.99454 7.4L (70-95) CB-743H Std .001, .010, .020 $6.99 MS-829H Std .010, .020 $50.99400 6.6L (70-80) CB-663H Std .001, .010, .020 $5.99 MS-1038H Std .001, .010 $41.99

Forged I-Beam RodsScat Connecting rods are make from highest quality 4130 material, bronzed bushed for full floating pins, andare simply the best value available anywhere. Shipped insized and balanced sets with ARP Wave Loc bolts theseconnecting rods offer a great cost savings with theadded assurance of a major brand name supplier.

3005 350 Chevy 5.7" long bushed . . . . . . . . . . . . . . . . .set $249.993006 350 Chevy 6.0" long . . . . . . . . . . . . . . . . . . . . . . set $249.993003 350 Chevy 5.7" long pressed pin . . . . . . . . . . . . . . set $219.99

• High Tensile 4340 Chromoly Material• Dowelled Cap for Superior Fit• 12 Point ARP/Scat 8740 Cap Screw • Lightweight I Beam Construction• Sized and Balanced to + 1 Gram

2030 350 5.7" Chevy bushed . . . . . . . . . . . . . . . . . . . . set $299.992028 350 5.7" Chevy pressed pin . . . . . . . . . . . . . . . . . set $279.992031 350 6.0" Chevy bushed . . . . . . . . . . . . . . . . . . . . set $299.992029 350 6.0" Chevy pressed pin . . . . . . . . . . . . . . . . . set $279.99

Low-CostCrankshaftsThese Cranks are thermal cleaned, steelshot blasted, bolt holes and keyways

inspected, centerline checked, straightened and magnafluxed. Necks,flanges and badly worn journals are restored, bearing journal surfacesmachined, polished, oil holes chamfered, thoroughly cleaned, with filletedradius to maintain OE specs.

Bearings Not Included with CrankshaftCore Return Policy-Cores returned for credit need to be sent at shippersexpense in rebuildable condition. Return cores “rust-free”. We recommendyou return it in the package sent to you. To insure prompt credit for yourcore, enclose a clear copy of your original invoice.

1833 350 Chevy 1967-85 . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$65.00

1833RM Federal Mogul Rod & Main Bearings Set . . . . . . . . . .$30.56

1862 350 Chevy 1986-94 . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.50

1833RM Federal Mogul Rod & Main Bearings Set . . . . . . . . . .$30.56

Connecting Rods Featuring ARP BoltsRods are shot-cleaned, old studs and nuts areremoved, rod and rod cap are then cut tosquare, new ARP 190,000 P.S.I. tensile strengthrod bolts and nuts installed, rod cap nuts arethen torqued to proper specs/45 lbs, rod journalresized to proper specs, small end checked for proper press to piston pin, com-pleted rod then checked for proper alignment.

CR631X Set of 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$120.00302 Ford 68-95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.99 ea.

CR1417X Set of 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$100.00327*, 307, 350 Chevy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.99 ea.*Large Journal

PlastigageSPG1 .001, .003 SPR1 .002, .006 SPB1 .004, .009

Box of 12 . . . .$11.88

Stock ChevyReplacement CranksFor Both Late and Early Model Blocks

• Scat 80-60-06 Cast Steel• Stronger than cast! • New-notreground • Std/Std bearing sizes

9017 350 (one piece rear seal) . . . . . . . . . . . . . . . . . . . . . .$164.999018 350 (two piece rear seal) . . . . . . . . . . . . . . . . . . . . . .$164.999019 454 (two piece rear seal) . . . . . . . . . . . . . . . . . . . . . .$279.99(Check for clearance • Clearance work may be required)

SCAT Stroker Crankshafts• Revolutionary space age 9000 series material • Knife Edged Counterweights• Lightening holes on all rod throws • Shot peened surfaces for superior strength• Micro-polished journals • Chamfered oiling holes • Over 3lbs lighter than the oldstyle 383 • Requires 400 Flywheel and Balancer

9021 Cast 383 Crank - 5.560" & 5.7000" Rods . . . . . . . . . . . . .$239.999022 Cast 383 Crank - Late Model one piece seal . . . . . . . . . . .$259.999023 Cast 383 Crank - 6.000" Rods . . . . . . . . . . . . . . . . . . . . .$299.999027 Cast 400 Crank - 5.700" Rods . . . . . . . . . . . . . . . . . . . . .$239.999028 Cast 400 Crank - 6.000" Rods . . . . . . . . . . . . . . . . . . . . .$299.99(All Scat Cast Stroker Crankshafts require balancing prior to assembly, Clearancing is required)#9-35037505700L requires 86 and newer balancer & fly wheel. Balancing required.

Main Bearing SpacersThese bearing spacers from CompetitionCams allow 350 Chevy crankshaft installationinto 400 Chevy blocks. Absolutely nomachine work is required to install. Simplysnap them in and install standard 350 bear-ings. You save the cost of buying expensivethicker bearings.

5620 Chevrolet V8 Bearing Spacers

. . . . . . . . . . . . . . . . . . . . . . . . .$65.99

Forged 4340 H-Beam Rods withARP 8740 Rod BoltsUse up to 1000 Horse Power

• Fully profiled for stroker use

• Doweled cap for precision fit

• Shipped with ARP Bolts

• Precision sized and balanced

2-350-5700-2100 350 Chevy 5.7" . . . . . . . . . . . . . . . .$349.992-350-6000-2100 350 Chevy 6.0" . . . . . . . . . . . . . . . .$349.992-454-6135-2200 454 Chevy 6.135" . . . . . . . . . . . . . .$379.992-454-6385-2200 454 Chevy 6.385" . . . . . . . . . . . . . .$379.99


Bala

nce

rs & T

imin

g

25

Pioneer Inc.HarmonicBalancersGreat care is taken in the design andassembly of every Pioneer O.E.

Replacement balancer to insure that the product replicates the OEM balancers in terms of dimension, weight and assembly tolerances to insureeasy fitting and reliability of performance.DA70 1984-95 Toyota Truck 2.4L . . . . . . . . . . . . . . . . . . . .$85.99DA151 1987-92 Buick Century 2.5R . . . . . . . . . . . . . . . . . . .$49.99DA258 1974-80 Jeep Cherokee, Wrangler 2.5, H . . . . . . . . .$74.99DA318 Dodge, Plymouth, Chrysler 318 V8 . . . . . . . . . . . . . .$74.99DA400 Chevrolet Car and Light Truck 400 V8 . . . . . . . . . . . .$59.99DA1401 1983-97 Ford Ranger 2.3L . . . . . . . . . . . . . . . . . . . .$59.99DA1733 1983-87 Chevrolet S10 2.8 . . . . . . . . . . . . . . . . . . . .$59.99DA2503 1977-84 Chevrolet Truck 250 6 cyl . . . . . . . . . . . . . .$84.99DA3021 1984-95 Ford Mustang 302 V8 . . . . . . . . . . . . . . . .$74.99DA3051 1983-92 Chevrolet Camaro 305 V8

(check vin number before ordering) . . . . . . . . . . . . .$59.99DA3072 1986-95 Chevrolet Caprice 307Y . . . . . . . . . . . . . . .$59.99DA3502 1973-82 Chevrolet Truck 350 V8

(check OEM # before ordering) . . . . . . . . . . . . . . . . .$59.99DA3504 1980-86 Chevrolet Truck 350 V8

(check OEM # before ordering) . . . . . . . . . . . . . . . . .$59.99DA3513 1988-96 Ford Truck 351W V8 . . . . . . . . . . . . . . . . .$64.99DA3601 1987-91 Jeep Grand Wagoneer 360 V8 . . . . . . . . . .$79.99DA1732 1989-93 GM 3.1 Vin “T” . . . . . . . . . . . . . . . . . . . . . .$59.99DA1893 1994-99 GM 3.1 Vin “M” . . . . . . . . . . . . . . . . . . . . .$79.99DA2311 1986-88 GM 3.8 (check OEM # before ordering) . . . .$89.99DA2312 1988-90 GM 3.8 (check OEM # before ordering) . . . .$89.99DA3000 1978-89 Ford Truck 300 6 cyl . . . . . . . . . . . . . . . . . .$89.99

PowerForceTM Hi-Performance Street DampersMade from extremely tough nodular iron and suitable for allstreet applications plus mild (non SFI) racing applications.These dampers are designed to be safely revved to as highas 6,500 rpm. Highest quality and are precision machinedto tolerances tighter than OEM. They come with a glossblack paint finish and white timing marks for easier reading.Externally balanced dampers feature bolt-in counterweightsthat are precision balanced. Counterweights are includedwith all external dampers. All Ford dampers have three sets

of timing marks to cover nearly every small block damper application.80000 6-3/4" Damper for 350 Chevy V8 (Internal) . . . . . . . . . . .$49.9980002 8" Damper for 350 Chevy V8 (Internal) . . . . . . . . . . . . . .$59.9980003 8" Damper for 400 Chevy V8 (External) . . . . . . . . . . . . . .$65.9980004 8" Damper for 396/427 Chevy (Internal) . . . . . . . . . . . . .$74.9980005 8" Damper for 454/502 Chevy (External) . . . . . . . . . . . . .$79.9980006 6.4" Damper for '79 & earlier SB Ford (28.4 oz. in.) . . . . .$74.9980007 6.4" Damper for '81 & later 5.0L SB Ford (50 oz. in.) . . . .$74.9981006 Spacer (Fits a 80006/80007 to '79 & earlier 351W) . . . . .$14.9981007 Spacer (Fits a 80006/80007 to '80 & later 351W & 302) . .$17.9981008 Spacer (Fits a 80006/80007 to '80 & later 351W & 302 . .$17.99Note: 80006/80007 Ford dampers have both 3 and 4-bolt accessory bolt patterns. Thesedampers are made to the shortest Ford damper length, as used on '79 and earlier vehicles.They will fit the listed engines in those early vehicles. To fit later vehicles, use an 81006 or81007 spacer as specified above.

Powerforce+PlusTM

Harmonic DampersOur Race Dampers are made from bulletproof 1045 steel. These dampers aredesigned to be installed on race engines that may rev over 10,000 rpm.Optimum damping occurs in the 6500 to 7500 rpm range. The machine workon these dampers is second to none and the critical fit tolerances and balanceare held more closely than OEM. All externally balanced dampers feature bolt-incounterweights. This feature allows for swapping weights between dampers(Ford) or adding them to internal balanced dampers (Chevy) if you changeapplications. The basic damper in any family is the same with either a differentcounterweight (Ford) or an added counterweight (Chevy). This provides anunlimited amount of flexibility. Plus, you can’t buy a more accurately balanceddamper.90000 6-3/4” Damper for 350 Chevy V8 (Internal) . . . . . . . . . .$132.9990001 6-3/4” Damper for 400 Chevy V8 (External) . . . . . . . . . .$154.9990002 8” Damper for 350 Chevy V8 (Internal) . . . . . . . . . . . . .$159.9990003 8” Damper for 400 Chevy V8 (External) . . . . . . . . . . . . .$164.9990004 8” Damper for 396/427 Chevy (Internal) . . . . . . . . . . . .$174.9990005 8” Damper for 454/502 Chevy (External) . . . . . . . . . . . .$184.9990006 6.4” Damper for Early Small Block Ford (28.4 oz. in.) . . .$169.9990007 6.4” Damper for ‘81 & Later 5.0L Small Block Ford

(50 oz. in.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$169.9981006 Spacer (Fits a 90006/90007 to ‘79 & Earlier 351W) . . . . . .$14.9981007 Spacer (Fits a 90006/90007 to ‘80 & Later 351W & 302) .$17.9981008 Spacer (Fits a 90006/90007 to ‘80 & Later 351W & 302 using a .917”

Ford Racing Crank Sprocket - also 351 Ford Racing HO . . .$17.9991003 Counterweight for Small Block Chevy 400 . . . . . . . . . . . . . .$9.9991005 Counterweight for Big Block Chevy 454 . . . . . . . . . . . . . . .$9.9991006 Counterweight for Early Small Block Ford (28.4 oz. in.) . . . .$9.9991007 Counterweight for Late Small Block Ford (50 oz. in.) . . . . .$12.99NOTE: All small block Ford dampers are made to the shortest (as measuredfrom the front the engine) length as used on ‘79 & earlier engines. Spacers areused to move the front face out to provide correct pulley alignment on laterengines. This feature allows you to install a late engine in an early vehicle anduse the stock pulleys and drive arrangement. All our Ford units have both threeand four bolt hole patterns and when used without the spacer, are the correctlength for early model vehicles.

Pioneer Inc. PerformanceStreet Balancers

Manufactured using a unique process which heat bonds the dampening rub-ber between a new high strength nodular iron center and inertia ring. UnlikeO.E. and after market replacement balancers where the rubber is simplypressed in, Pioneer Performance Street Balancers‘ heat bonding process elimi-nates slipping and component separation up to 6500 R.P.M. Ideal for high per-formance applications when an SFI balancer is not required, these balancersare priced only slightly higher than the O.E. replacement from the dealer.

872001 1968-73 Chevrolet 307 w/6" Diameter . . . . . . . . . . .$89.99872002 1978-79 Chevrolet 200-262Z V6 & 1957-97,

283-350 w/7" Dia. . . . . . . . . . . . . . . . . . . . . . . . . .$89.99872003 1978-79 Chevrolet 200-262Z V6 & 1957-97,

283-350 w/8" Dia. . . . . . . . . . . . . . . . . . . . . . . . . .$99.99872004 1970-76 Chevrolet S/B 400 w/8" Dia.

w/counterweight . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99872005 1966-97 Chevrolet 427 w/8" Diameter . . . . . . . . .$119.99872006 1966-97 Chevrolet 454 w/8" Dia. w/counterweight$119.99872007 1968-83 Ford 351 Cleveland w/counterweight . . . .$119.99872008 1968-79 Ford 302-351W 3 bolt w/counterweight

& raised pulley . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.99872009 1968-79 Ford 302-351W 3 bolt w/counterweight &

counter sunk pulley . . . . . . . . . . . . . . . . . . . . . . . .$119.99872010 1984-95 Ford 302 EFI (H.O.) w/counterweight . . . .$119.99872011 1968-77 Pontiac 301-455 . . . . . . . . . . . . . . . . . . .$119.99

Other Applications Available

Harmonic Balancer Removal Installation ToolMakes a difficult job easy! Installs almost any harmonicdamper on GM, Ford, and Chrysler. Also works as a universal puller.

66514 . . . . . . . . . . . . . . . . . . .$69.99


Bala

nce

rs &

Tim

ing

26

Performance SeamlessSolid RollerSpecial design high strength pins, shot peened castiron camshaft sprockets, steel billet-multiple keywaycrankshaft sprockets.

40400 Small Block Chevy . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.9940401 Big Block Chevy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.9940402 Ford 302/351W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.9940406 Chrysler 318/340/360 . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

Performer-Link True-RollingTiming Chain Sets

Performer-Link True-Rolling Timing Chain and Gear sets are for use withEdelbrock or stock cams. They have a solid-bushing chain for a true bearingsurface that rolls with the sprockets, eliminating chain stretch. Crank gears aremachined from SAE-1144 stressproof steel. Sets have three keyway settingpoints to ensure accurate timing selection for early or late model vehicles.Performer-Link sets are not for use above 6500 RPM.Chevrolet7800 1955-95 V8 262, 265, 267, 283, 302, 305, 307, 327,

350, 400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.99Ford7811 1962-65; 1973-95 V8 221, 260, 289, 302, 351-W . . . .$50.997821 1962-80 V8 351-C, 351M/400 . . . . . . . . . . . . . . . . . . .$53.997820 65-72 V-8 255, 289, 302, 351W . . . . . . . . . . . . . . . . .$45.99Pontiac7812 55-82 V-8 287, 316, 326, 347, 350P, 370, 389, 400, 421,

428, 455 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.99Oldsmobile7813 65-90 V-8 260, 307, 330, 350R, 400, 403, 425, 455 . .$54.99

Accu-Drive Gear DrivesThe Accu-Drive camshaft gear drive kit replaces a stock timing chain with a precision gear drive system. Thegear drive can be easily installed. Just replace thestock crank and camshaft sprockets with Accu-Drivegears and slip in the idler assembly. Note: Accu-Drive Gear Drives are not recommendedfor use above 7,000 RPM or on computer-controlledvehicles with knock sensor.

7890 Chevy 262-400 V8 57-95 . . . . . . . . . . . . . . . . . . . . .$159.997891 Chevy 396-454 V8 65-90 . . . . . . . . . . . . . . . . . . . . .$198.997892 Ford 289-302 V8, 351-Windsor 67-85 . . . . . . . . . . . . . .$209.997893 Ford 5.0L 85 & later hydraulic roller lifter cams . . . . . .$229.997894 Ford 429-460 V8 68-87 . . . . . . . . . . . . . . . . . . . . . .$229.997895 Pontiac 326-455 V8 . . . . . . . . . . . . . . . . . . . . . . . . .$299.997896 Ford 351C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$224.99

3-Piece StockReplacement Timing Set

3-358SA Ford 255, 302, 351W late . . . . . . . . . . . . . . . . . . . . .$15.993-359SB Buick 181, 196, 231, 252 . . . . . . . . . . . . . . . . . . . . .$16.993-498SC Olds 260, 307, 350R, 403 . . . . . . . . . . . . . . . . . . . . .$16.993-499S Most S/B Chevy V8 . . . . . . . . . . . . . . . . . . . . . . . . . .$11.993-350S Pontiac 326, 350, 389, 400, 455 . . . . . . . . . . . . . . . .$19.993-361S Chrysler 318, 360 . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.993-494SB Ford 351C, 351M, 400 . . . . . . . . . . . . . . . . . . . . . . .$17.993-494SA Ford 352, 360, 390, 427, 428 early . . . . . . . . . . . . . .$18.993-501S Most B/B Chevy V8 . . . . . . . . . . . . . . . . . . . . . . . . . .$21.993-163S S/B Chevy HD Double Roller . . . . . . . . . . . . . . . . . . .$15.99

Heavy-DutyDouble Roller

Heavy-duty chain features .200"diameter rollers and3 keyways in carbon steel crank sprocket.C-3023X S/B Chevy . . . . . . . . . . . . .$18.99C-3024X B/B Chevy . . . . . . . . . . . . .$24.99

Street Series TRUERoller Timing Chain SetsThe performance true roller for the budget mindedracer. Precision machined cast iron cam sprocket,patented 3 keyway heat treated billet steel cranksprocket, KCM .250 diameter true roller chain featuringsolid rollers and carburized pins for excellent wearresistance.

9-1100SP Chevrolet 90° V6 and Small Block V8 1955-upV6: 200, 229, 262, 4.3Z (4.3Z w/o balance shaft)V8: 262, 265, 267, 283, 302, 305G, 305H, 307, 327, 350L, 400 without factory roller camshaft . . . . . . . . . . .$29.99

9-1103 Chrysler, Dodge, Plymouth V6 and Small Block V8 all 1956-up V6: 3.9L (238) V8: 273, 315, 318, 325, 326, 340, 354, 360, 392 . . . . . . . . . . . . . . . . . . . . . . .$42.99

9-1104 Chrysler, Dodge, Plymouth Big Block V8 1956-up with single bolt cam 350, 361, 383, 400, 413 (except truck), 426 wedge, 440 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.99

9-1110 Chevrolet Big Block V8 1965-up 396, 400, 402, 427, 454 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99

9-1122 Ford Big Block V8 1968-up 429, 460(eliminates factory retarded timing on 72-up) . . . . . . . .$39.99

9-1135 Ford Small Block V8 1962-84 (3/21/84) 221, 255, 260, 289 std,302 std, 302 Boss, 5.0L (302) H/O, 351W std, 351W H/O usesone-piece fuel pump eccentric (Ford #C3AZ-6287-B) . . .$32.99

9-1138 Ford Small Block V8 1984-up 5.0L (302), 351W uses two-piece fuel pump eccentric (Ford #’s D5AZ-6287-B & DOAZ-6287-A) . . . . . . . . . . . .$32.99

9-1118 AMC V8 290 thru 401 1966-up . . . . . . . . . . . . . . . . .$72.999-1132 Buick V6 w/o Int. Dist. Dr 1962-82 . . . . . . . . . . . . . . .$44.999-1134 Buick V6 w/Int. Dist. Dr 1977-88 . . . . . . . . . . . . . . . .$57.999-1144 Buick V8 400, 430, 455 1967-76 . . . . . . . . . . . . . . . .$72.999-1146 SB Chevy “Rocket Block” . . . . . . . . . . . . . . . . . . . . . . .$49.99

Some parts are not legal for sale or use on pollution controlled motor vehicles

Gear DrivePrecision cut billet steel. Heat treated gears forincreased durability. 3 keyway crank gear —allows plus/minus 4°8-5100 S/B Chevy . . . . . .$129.998-5100Q Quiet Version . . . .$139.998-5110 B/B Chevy . . . . . .$139.998-5135 S/B Ford . . . . . . .$139.99

High-Performance Gear DrivesRugged, high-precision timing, machined for noise,and easy to install. Includes locking plate, bushingsand bearings.66917C Chevy S/B .........................$99.9966918C Chevy B/B ......................$119.99

Bala

nce

rs & T

imin

g

27

Camlock Plate &Bolt Assembly

Prevents cam bolts from loosening during engine operation. Works onChevy 262-400, 348-409, 427(Z11), 396-454 and 90° V6, 200-262.4605 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.99

Street Master Double-Roller Timing ChainFeatures standard roller timing chain with cast ironsprockets. Has 3 keyway sprocket so that thecamshaft can be installed straight up, advanced 4°,or retarded 4°. Fits Small Block Chevy.73163 . . . . . . . . . . . . . . . . . . .$20.99

Hex-A-Just SetsAll Hex-A-Just Chain sets are infinitely adjustable toplus or minus 6°. These sets feature billet steelcamshafts sprockets and all the features of our TrueRoller sets. Torrington thrust bearing is included

with the Chevrolet style sets. Bolts & key included

9-3100A V6-200, 229, 262, 4.3Z(w/o Bal. Shaft) 1955-up .$99.999-3100A-5 .005 under for a line bored block . . . . . . . . .$119.99

Complete Timing KitComplete 3 pc. timing set with timing cover seal andFel Pro gaskets. (Does not include oil pan gasket)

ChevyCTS-1000 305, 350 75-84 .405” toothwidth . . . . . . . . . . . .$19.99CTS-1001 350 69-74 .405” toothwidth . . . . . . . . . . . . . . .$19.99CTS-1003 400 S/B 75-80 truck only . . . . . . . . . . . . . . . . .$24.99ChryslerCTS-3000 318, 360 65-88 exc. H/D or police . . . . . . . . . . .$36.99CTS-3002 318, 340, 360 68-80 H/D,

high performance & police . . . . . . . . . . . . . . . . . .$41.99FordCTS-2000 302, 351C 79-85 exc. H/O . . . . . . . . . . . . . . . . . .$24.99CTS-2001 302, 351C 73-78 exc. H/O or police . . . . . . . . . .$25.99CTS-2002 302 82-85 H/O 89-94 double roll . . . . . . . . . . . .$36.99

TRU-Roller Timing Chain Sets.250" diameter non-split rollers. Cam and crankgears are machined from high-tensile strengthheat-treated materials and have a wider tooth pro-file with 3 keyways.

15000 AMC 290-401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.9915001 Buick V6 (62-76) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.9915002 Buick V6 (77-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.9915003 Buick 400-455 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.9915004 Small Block Chevy . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.9915005 Big Block Chevy . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$58.9915006 Ford 351C, 351M, 400 . . . . . . . . . . . . . . . . . . . . . . .$64.9915007 Ford 390-428 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$65.9915008 Ford 289 (std)/351W, 302 (std and HO) . . . . . . . . . . .$56.9915009 Ford 429/460 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.9915010 Chrysler 383-440 (single bolt cam) . . . . . . . . . . . . . . .$74.9915012 Olds 260-455 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.9915013 Pontiac 326-455 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.9915014 Chrysler 383-426-440 (3 bolt cam) . . . . . . . . . . . . . . .$74.9915015 Small Block Chevy-Hyd Roller (84-up) . . . . . . . . . . . . . .$59.99

Quick Button Two Piece Timing CoverThe perfect compliment to our Hex-A-Just True Roller timing Sets. TheQuick Button Two Piece Timing cover provides easy access to cam timingadjustment. The built-in cam button allows you to adjust cam endplaywith the cover in place.• Made from Die Cast Aluminum• Easy Access to Hex-A-Just• Built-In, fully rollerized Cam Button• Gasket Included on Small Blocks

Small Block Chevy9-221 1955-up (Non-Factory Roller Cam) . . . . . . . . . . .$99.999-227 1955-up with BB Cam & Crank Snout . . . . . . . .$109.999-225 1985-up (w/Factory Roller Cam) . . . . . . . . . . . . .$89.999-226 1985-up “Rocket Block” Raised Cam/SB Crank . .$119.999-207 Replacement Gasket for all SB’s

One piece timing cover/water pump gasket . . . . .$12.99

Big Block Chevy9-231 1965-up (Non-Factory Roller Cam) . . . . . . . . . .$129.99

TRUE® Roller Timing Chain Setswith Needle Bearing Included!Street True Roller Timing SetsThese sets offer anew level of True® Roller advantage for the value drivenracer. their cast iron durability, True® Roller chain with oversized rollers,and three keyway crank sprockets offer unmatched quality. 9-1100T V-6 200 229 262 (4.3Z w/o Balance shaft

V-8 262 265 267 283 302 305G,H 307 327 350L 4001955-up Non Factory Roller Cam . . . . . . . . . . .$49.99

9-1110T V-8 Big Block 396 400 402 427 454 1965-Up Non Factory Roller Cam . . . . . . . . . . .$59.99

Original True Roller Timing SetsCloyes sprockets are made for SAE D7003 ductile iron or induction hard-ened cast iron for unmatched durability. The Renold True® Roller chainfeatures full roller action and superior strength. Rollers are made fromhigh strength steel, which is rolled and hardened to exacting standards. 9-3100T V-6 200 229 262 (4.3Z w/o Balance shaft

V-8 262 265 267 283 302 305G,H 307 327 350L 4001955-up Non Factory Roller Cam . . . . . . . . . . . .$99.99

9-3110T V-8 Big Block 396 400 402 427 454 1965-Up Non Factory Roller Cam . . . . . . . . . . .$119.99

9-3146T V-8 SB “Rocket” w/Raised Cam & SB Crank SnoutAll years . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.99

Sky Guard EGR Kleen ScreenCarbon FiltersCatch and filter out carbon particles in the EGR system that cause stallingand rough idle. Inspect and clean or replace every 12,000 to 15,000miles (5,000 to 10,000 miles if vehicle is subject to shor tripl operationl).2-1121 Ford 80-93 , Ford Trk 81-86, Lincoln 80-92,

Merc 80-91 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.992-1357 Buick 94-99, Cadillac 93-99, Chev, C Trk 93-99,

GMC Trk 92-99, Olds, Olds Trk 94-99, Pont, Pont. Trk 94-99, Saturn 94-97 . . . . . . . . . . . . . . .$9.99

2-1377 Ford 87-99, Ford Trk 93-99, Lincoln 88-98, Mazda Trk 94-99Mercury 86-2000, Mercury Trk 97-98 . . . . . . . . . .$9.99

2-1378 Ford 92-98, Lincoln 91-98, Mercury 92-97 . . . .$12.99

2-1121 2-1357 2-1377 2-1378



Oil S

yst

em

28

Successful engine builders know that externally priming the oiling system of anew engine eliminates dangerous “dry” initial start-up! Crane’s chevrolet oil pumpprimer tool features a special bushing that seals the oil galley and completelyprimes and pressurizes the entire engine oil system. All models feature an uppercollar that also prevents oil pump drive side-loading. Use your heavy-duty 3/8”drive drill motor to build oil pressure and uniformly distribute oil throughout theengine for initial start-up.

Oil PumpsMelling is the name known for quality oilpumps. All pumps are 100% pressure testedand hand spun before shipping.Chevrolet V8M55 SB Stock Replacement . . .$12.99M55HV SB High Volume . . . . . . .$19.99M99HVS* SB High Volume & Press $42.99M55A SB Z28 Hi Pressure . . . . .$26.99

M77HV BB High Volume . . . . . . . . . . . . . . . . . . . . . . . . .$29.99M77 BB Stock Replacement . . . . . . . . . . . . . . . . . . . . .$19.99Pontiac V8M54DS High Pressure w/Screen . . . . . . . . . . . . . . . . . . . .$28.99FordM68 289-302 Stock Replacement . . . . . . . . . . . . . . . . .$19.99M68A 289-302 High Pressure . . . . . . . . . . . . . . . . . . . . .$39.99M68HV 289-302 High Volume . . . . . . . . . . . . . . . . . . . . .$29.99M83 351W Stock Replacement . . . . . . . . . . . . . . . . . . .$22.99M83HV 351W High Volume . . . . . . . . . . . . . . . . . . . . . . .$39.99M84A 351C/M/400 Stock Replacement . . . . . . . . . . . . . .$22.99M84AHV 351C/M/400 High Volume . . . . . . . . . . . . . . . . . .$32.99M57HV 390 High Volume . . . . . . . . . . . . . . . . . . . . . . . .$35.99M84 429-460 Stock Replacement . . . . . . . . . . . . . . . . .$26.99M84BHVS 429-460 High Volume . . . . . . . . . . . . . . . . . . . . .$54.99Olds V8M22F Stock Replacement . . . . . . . . . . . . . . . . . . . . . . . .$24.99M22FHV High Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.99* Includes Screen

Performance Oil Pumpfor S/B Chevy & FreeFlowing Bolt On ScreenDesigned for increased performance during rac-

ing. Extended shafts that reduce drive shaft bear-

ing wear. This high volume pump has machined

steel gears, screw in plugs and bolt on screen.

10555 S/B Chevy, includes shaft w/steel guide . . . . . . . . . . . . . . .$59.99

12557 Bolt on Screen, Stock 7" deep pan . . . . . . . . . . . .$13.99

12559 Bolt on Screen, Stock 8"

deep pan . . . . . . . . . . . .$13.99

Oil Pump Primer Tool99010-1 Chevy 262-400, 396-454, 90° V6 . . . . . . . . . . . . . . . . . . . . . .$26.99

99012-1 Ford V8 221, 302, Boss 302, 351W (1/4" Hex) . . . . . . . . . . . .$18.99

99013-1 Ford V8 351C, 351M, Boss 351, 400, 370, 429, 460 (5/16" Hex)$18.99

Oil Pump Shaft WithSteel Pinned SleeveFor Chevy High-Volume Oil Pumps

IS55E Small Block Chevy . . . . . . .$5.99IS77 Big Block Chevy . . . . . . . . . .$5.99

High Pressure Oil Pump Spring #26 For Small Block Chevy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99

Oil Pump ScreenThere is no more economical way to reduce

both oil pump and engine failure due to for-

eign materials.

55S1 Small Block Chevy . . . . . . .$4.9977S2 Big Block Chevy 70-76 . . . .$5.99241S Big Block Chevy 77-96 . . . .$5.99

Hi Volume OilPump KitIncludes: M55HV Hi volume Oil Pump

55S1 Oil Pump Screen

IS55E Oil Pump Shaft w/steel pinned sleeve

OPK-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99

70-76 454 BB ChevyIncludes: M77HV Oil Pump

77S2 Oil Pump Screen IS77 Oil Pump Shaft w/steel pinned sleeve

OPK-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.99

02 Ford 69-79 F150 onlyIncludes: M68HV oil pump ,

68S2 oil pump screenIS68 oil pump shaft

OPK-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.99

Oil Pan KitsOil Pan Studs234-1901 Small Chevy, black oxided, hex . . . . . . . . . . . . . . . . . . . .$19.99434-1901 Small Chevy, stainless steel, hex . . . . . . . . . . . . . . . . . . . .$31.99254-1901 Small Ford, black oxided, hex . . . . . . . . . . . . . . . . . . . . .$37.99200-1901 Small Chrysler, black oxided, hex . . . . . . . . . . . . . . . . . . .$25.99Oil Pan Bolts234-1802 Small Chevy, black oxided, hex . . . . . . . . . . . . . . . . . . . .$15.99234-1801 Small Chevy, black oxided, 12-point . . . . . . . . . . . . . . . . .$15.99235-1802 Big Chevy, black oxided, hex . . . . . . . . . . . . . . . . . . . . . .$19.99

Oil Pump Stud Kits230-7001 Small Chevy, black oxided, hex . . . . . . . . . . . . . . . . . . . . . .$4.99230-7003 All Chevy, 3.125”, black oxided,hex . . . . . . . . . . . . . . . . . .$4.99230-7002 Small Chevy, black oxided, 12-point . . . . . . . . . . . . . . . . . .$6.99230-7004 All Chevy, 3.125”, black oxided, 12-point . . . . . . . . . . . . . .$6.99154-7005 All Ford, oil pump to pickup, black oxided, hex . . . . . . . . . .$6.99


Oil Sy

stem

29

Total Fuel System CleanerPour in a bottle of Royal Purple's highly effective Total Fuel SystemCleaner and in one tank-full of gas the injectors, valves, lines, pumpand tank will be significantly improved. Eliminates engine knockand pinging caused by a reduction in flow. Contributes to morecomplete combustion, which reduces emissions. Promotes easierstarting.RPMFS-BP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.29

Max-Tuff Assembly LubeMax-Tuff Assembly lube is formulated to adhere tenaciously to metalsurfaces creating a superior, load-bearing oil film barrier that elimi-nates the possibility of metal-to-metal contact. Ideal for anyoneassembling engines. Not recommended for piston rings. Containsno solids. Available in 8 oz. bottle.MTASSL10-B8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99

Oil Pan BoltsSelf Locking. The special smaller-than-standard hex head is

ideal for tight spaces. Because of the hex flange design, it will not fall back intosocket wrench, allowing for easier installation. Special underhead serrations pre-vent loosening and the wide flange head distributes uniform clamping pressurefor an ultra gasket seal.

Zinc Plated Oil Pan Bolt Kits6085 Chevy small block and 90° V6 engines & Olds V8, 1/4"-20 x 1/2",

14 pcs., 5/16"-18 x 3/4", 4 pcs. . . . . . . . . . . . . . . . . . . . . .$5.996086 Chevy big block and Pontiac V8, 1/4"-20 x 1/2", 2 pcs., 5/16"-18 x

3/4", 20 pcs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.996087 Ford 289-302-351 C/W and AMC 290-343-360-390-401 5/16"-

8 x 3/4",6 pcs., 1/4"-20 x 1/2", 18 pcs. . . . . . . . . . . . . . . . .$7.996088 Buick V6, Ford 390-428, Mopar V8’s, 5/16"-18 x 3/4",20 pcs.$7.99

Chrome Plated Oil Pan Bolts5010 Chevy Small Block 14 each, 1/4"-20 x 1/2" hex . . . . . . . . .$15.99

OEM Motor OilSpecially formulated SAE grades for use in engines of alltypes—from cars and trucks to SUVs, motorcycles and boats.Designed for today's high temperature, high revving engines.Royal Purple reduces friction, resulting in 1-3% extra horse-power, lower temperatures, superior protection, improvedfuel economy and extended oil life. Changing to Royal Purpleprovides you with the most advanced motor oil available. APICertified.

RPM5W20-BQ 5W20 . . . . . . . . . . .$4.99RPM5W30-BQ 5W30 . . . . . . . . . . .$4.99

RPM10W30-BQ 10W30 . . . . . . . . . . .$4.99RPM10W40-BQ 10W40 . . . . . . . . . . .$4.99RPM15W40-BQ 15W40 . . . . . . . . . . .$4.99RPM20W50-BQ 20W50 . . . . . . . . . . .$4.99

Locking Header BoltsTD Performance Locking Header Bolts are the best mechani-cal locking fastener in the world. When installed, the patent-ed, all metal fastening system will simply not loosen until youwant it to.

8837 SB Chevy V8 Header Bolt Kit 3/8-16 x 1" (12) . . . . . . . .$46.998839 BB Chevy V8 Header Bolt Kit 3/8-16 x 3/4" (16) . . . . . . .$49.998842 SB Ford V8 Header Bolt Kit 3/8-16 x 1" (16) . . . . . . . . . .$49.998844 BB Ford V8 Header Bolt Kit 3/8-16 x 1" (16) . . . . . . . . . .$49.99

“Small Head” Header BoltsTD Performance's Small Head (non-locking) Header Bolts are heattreated to grade 5 for extra strength. The small head makesheader installation a snap when bolt clearance is a problem.

8885 Extra Small Head Header Bolts 3/8-16 x 3/4" (12) . . . . . . . .$5.99

Max ATFReducing operating temperatures and internal friction is the key tooptimum performance and reliability in an automatic transmission.Royal Purple's MAX ATF puts a tough, anti-friction film on all movingparts. Recommended for all applications where Ford MERCON andGM DEXRON fluids are specified.RPMMATF-BQ Max ATF . . . . . . . . . . . . . . . . . .$6.99

Max GearFormulated to improve the efficiency of rear end assembliesand manual transmissions, Royal Purple's Max-Gear oil con-tains Synslide, a proprietary synthetic oil film that significantlyreduces wear and friction. Contains cushioning moleculesthat absorb shock loads. No extra additives or friction modi-fiers required for use with limited slip differentials.

RPM75W90-BQ 75W90 Max Gear . . . . . . .$7.99RPM75W140-BQ 75W140 Max Gear . . . . . . .$7.99RPM85W140-BQ 85W140 Max Gear . . . . . . .$7.99

Purple ICELowering engine operating temperatures can translate intomore power and reliability. One 16 oz. bottle of RoyalPurple's highly effective Purple Ice Radiator Super Coolantwill drop the temperature of water, or water/antifreeze up to20°. It also adds metal protection to the cooling system.Relied upon by racers. Works great on the street. Ideal fortowing!RPMPI-BP Purple Ice . . . . . . . . . . . . . . .$9.99

Racing OilRoyal Purple Racing Oil is extremely popular in all forms ofmotorsports, from NASCAR to NHRA. Professional enginebuilders and race teams have found increased horsepowerand longer engine life by using Royal Purple. Used andendorsed by world champions. Absolutely the most effectivesynthetic motor oil offered! Available in many grades forevery type of racing.

RPMR9-BQ Race 9 Viscosity Typical of a 0W10 . . . . .$8.34RPMR11-BQ Race 11 Viscosity Typical of a 5W20 . . . . .$8.34RPMR21-BQ Race 21 Viscosity Typical of a 5W30 . . . . .$8.34RPMR41-BQ Race 41 Viscosity Typical of a 10W40 . . . . .$8.34RPMR51-BQ Race 51 Viscosity Typical of a 20W50 . . . . .$8.34

2-Cycle TCW IIIRecommended for use in both pre-mixed and oil injectedgasoline two-cycle engines in outboard motors, motorcycles,jet skis, chain saws, etc. Synthetic solvency keeps spark plugsand exhaust port clean for maximum engine efficiency.Promotes increased horsepower and engine speed.Greaterengine combustion efficiency and goes longer between over-hauls.RPMTCWIII-BQ . . . . . . . . . . . . . . . . . . . . . . . .$6.99

2-Cycle TCW III RacingRecommended for use in pre-mixed gasoline two-cycleengines. A high performance engine oil that improves per-formance and reduces wear in high performance two-cyclegasoline engines. Synthetic solvency keeps spark plugs andexhaust ports clean for maximum engine efficiency. Thisengine cleanliness, combined with low coefficient of frictionpromotes increased hp and speed.RPM2CR-BQ . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49

Heavy Duty Motor OilSpecially formulated SAE grades for use in high performance cars,trucks, motorcycles and boats. API certified. Allows our engine torun with less friction, resulting in increased horsepower, better fuelmileage, lower temperatures and superior protection. Designed forextended drain intervals.RPM30-BQ SAE 30 . . . . . . . . . . . . . . . . . . . $4.99RPM40-BQ SAE 40 . . . . . . . . . . . . . . . . . . . $4.99

Head StudsARP Sport Compact HeadBolts come with compact

12 point nuts with premiumparallel ground washers 190,000 PSI

207-4201 Mitsubishi 16 Valve 4G63 pre-1994 . . . . . . . . . .$79.99

207-4203 Mitsubishi 16 Valve 4G63 94-99 . . . . . . . . . . .$104.99

208-4301 Honda D16 10mm .$109.99


Bolt

Kit

s, S

tuds

& F

ast

en

ers

30

Rod BoltsARP Sport Compact Rod Bolts aremade with 8740 aloy chrome molysteel witch gives a tensile strength of190,000 PSI

208-6001 Honda 1.2 to 1.L 8mm . . . . . . . .$35.99107-6001 Mitsubishi 4G63 pre-1994 9mm .$35.99107-6002 Mitsubishi 4G63 94-99 8mm . . .$35.99

IntakeManifold Bolt Kits

170,000 Min. psi. 3/8" socket Hex Black Oxide

134-2001 S/B Chevy 265-400 ci . .$13.99135-2001 B/B Chevy 396-454 ci . .$15.99154-2001 Ford 260-289-302-351W $19.99154-2004 Ford 351C, 351M, 400 .$21.99114-2001 AMC 290-343-390 ci . . .$14.99144-2001 Chrysler 273-440 Wedge $14.99194-2001 Pontiac 350-400 ci . . . .$19.99

Engine Accessory Fastener Kits534-9501* S/B Chevy 350-400 ci 12 pt . . . . . . . . . .$75.99534-9601* S/B Chevy 350-400 ci Hex . . . . . . . . . . .$75.99534-9701# S/B Chevy 350-400 ci 12 pt . . . . . . . . . .$62.99534-9801# S/B Chevy 350-400 ci Hex . . . . . . . . . . .$62.99535-9501* B/B Chevy 396-454 ci 12 pt . . . . . . . . . .$86.99535-9601* B/B Chevy 396-454 ci Hex . . . . . . . . . . .$82.99535-9701# B/B Chevy 396-454 ci 12 pt . . . . . . . . . .$67.99535-9801# B/B Chevy 396-454 ci Hex . . . . . . . . . . .$67.99* Stainless 300 # Chrome Moly Black Oxide

Head Bolt Kits134-3601 S/B Chevy 6 pt . .$46.99135-3601 B/B Chevy 6 pt .$49.99154-3601 S/B Ford 289-302 $37.99154-3603 S/B Ford 351W . .$49.99

144-3601 S/B Chrysler “A” eng. . . . . . . . . . .$67.99145-3608 B/B Chrysler “A” eng . . . . . . . . . .$72.99190-3607 S/B B/B Pontiac D-Port . . . . . . . . .$69.99

Header BoltKits400-1101 3/8" diameter Bolt .750 inch

12 pcs Hex Stainless 300 . . .$15.99400-1201 3/8" diameter Bolt .750 inch 12 pcs

12 pt Stainless 300 . . . . . . . . . . .$15.99

Timing CoverBolt & StudKits

Chevy Timing Cover Stud Kit200-1401 . . . . . . . . . . . . . . . . .$12.99Chevy 12 pt Timing Cover Bolt Kit200-1501 . . . . . . . . . . . . . . . . . . .$7.99

Valve CoverBolt & StudKits

100-7501 Bolt Kit 1/4"-20 8 pcs 12 PointBlack Oxide.......................................$7.99200-7602 Stud Kit 14 pcs 1/4" Hex BlackOxide.............................................$21.99

Main Bolt Kits134-5001 S/B Chevy 2 Bolt Kit Lrg Journal $17.99134-5202 S/B Chevy 4 Bolt Kit Lrg Journal .$25.99135-5002 B/B Chevy 2 Bolt Kit . . . . . . . . .$29.99135-5201 B/B Chevy 4 Bolt Kit . . . . . . . . .$49.99154-5001 S/B Ford 2 Bolt Kit . . . . . . . . . . .$18.99154-5201 S/B Ford 4 Bolt Kit . . . . . . . . . . .$26.99

Head Stud Kits(Studs & Hex for 2 Heads)

134-4001 S/B Chevy Hex . . . . .$103.99135-4001 B/B Chevy Hex . . . . .$112.99154-4001 Ford 289-302 7/16" Hex$69.99154-4003 Ford 351W 1/2" Hex . .$85.99154-4004 Ford 351C Hex . . . . .$106.99145-4006 B/B Chrysler

B & RB Wdg . . . . . . .$109.99234-4301 S/B Chevy 12 pt . . . .$145.99235-4102 B/B Chevy Brodix . . . .$119.99

CarburetorStud Kit

200-2401 Standard Carb Stud Kit . .$7.99200-2402 1" Carb Spacer Stud Kit . .$8.99

Flywheel/ Flexplate Bolt Kit

100-2801 Chevy & Ford 7/16" x 1.00"Flywheel Kit 6 pcs High Performance .$8.99100-2901 Chevy & Ford 7/16" x .680"Flexplate Kit 6 pcs High Performance .$8.99

Oil Pump Studs

230-7001 Chevy SB Hex . . . . . . . . . . . . . . . . .$4.99230-7003 3.125" SB/BB Chevy High Volume .$4.99

134-6001 Chevy 283-327 11/32" . . . . . . . .$41.99134-6002 Chevy S/B 400 3/8" . . . . . . . . . .$41.99134-6003 Chevy 307-350 3/8" . . . . . . . . . .$39.99135-6001 Chevy B/B 7/16" . . . . . . . . . . . .$44.99154-6001 Ford 351M-400 3/8" . . . . . . . . .$44.99154-6002 Ford 289-302 5/16" . . . . . . . . . .$41.99154-6003 Ford 351C 3/8" . . . . . . . . . . . . .$41.99155-6002 Ford FE 390-428 . . . . . . . . . . . . .$41.99155-6003 Ford 429-460 . . . . . . . . . . . . . . .$44.99151-6002 Ford 2300CC 3/8" . . . . . . . . . . .$22.99184-6001 Oldsmobile 350 . . . . . . . . . . . . .$41.99185-6001 Oldsmobile 455 3/8" . . . . . . . . .$41.99144-6001 Chrysler 340-360 . . . . . . . . . . . .$41.99145-6002 Chrysler 383-440 3/8" . . . . . . . .$41.99190-6001 Pontiac V8 63-to present ex

Super Duty . . . . . . . . . . . . . . . . .$41.99

Hi-PerfConnectingRod Bolts(190,000 psi.)

WavelocRod Bolts

190,000 psi. Exclusive Waveloc design takesthe risk out of replacement style rod bolts byeliminating the cause of failures in the boltshank.134-6402 Chevy 400 . . . . . . . . .$41.99134-6403 Chevy 305-307-350

3/8" . . . . . . . . . . . . .$39.99135-6402 Chevy Big Block 3/8" .$41.99135-6401 Chevy Big Block 7/16"$69.99154-6403 Ford 351C . . . . . . . . .$41.99150-6404 Ford Boss 302-429

460-351W 3/8" . . . . .$41.99

MainStud Kits

134-5401 S/B Chevy 2 Bolt Kit lg journal . . . . . . . . . . . . . . . . .$35.99

134-5601 S/B Chevy 4 Bolt Kit . .$47.99135-5402 B/B Chevy 2 Bolt Kit . .$43.99135-5601 B/B Chevy 4 Bolt Kit . .$82.99154-5401 Ford Boss 289-302

2 Bolt Kit . . . . . . . . . . .$35.99155-5402 Ford 460, 385-Series

Stud Kit . . . . . . . . . . . .$48.99140-5401 Chrysler V8 All except 426

Hemi Stud Kit . . . . . . .$45.99194-5601 Pontiac with

4 Bolt Mains Kit . . . . . .$72.99


Bolt K

its, Studs &

Faste

ners

31

High Performance Rod BoltsPioneer Rod Bolts are 100% magnuflux inspected. Complete withGrade 8 self-locking nuts.

S-1030 Ford BOSS 289/302/351W/460 Engines 3/8" diameter170,000 PSI tensile strength . . . . . . . . . . . . . . .$51.99

S-1031 Chevy 265/283/327 Engines 11/32" diameter170,000 PSI tensile strength . . . . . . . . . . . . . . .$25.99

S-1032 Chevy 396/427/454 Engines 3/8" diameter 170,000 PSI tensile strength . . . . . . . . . . . . . . . . . . . . . . . . .$25.99

S-1033 Chrysler B/B/most Hemi’s plus Pontiac 389/400/421 150,000 PSI tensile strength . . . . . . . . . . . . . . .$37.99

S-1035 Chevy 305/307/350 Engines 3/8" diameter 170,000 PSI tensile strength . . . . . . . . . . . . . . .$29.99

S-1037 Chevy 427/454 Engines 7/16" diameter 170,000 PSI tensile strength . . . . . . . . . . . . . . .$49.99

S-1038 Chrysler 318/340/360 Engines 3/8" diameter 170,000 PSI tensile strength . . . . . . . . . . . . . . .$19.99

853008 Chevy400 S/B Engines180,000 PSI tensile strength . . . . . . . . . . . . . . .$44.99

Chrome PlatedTransmission Pan Bolts5012 GM TH350 and 400, 13 each,

5/16"-18 x 3/4" hex . . . . . . . .$19.99

Cylinder Head Bolt SetsES71028 95-01 CHR Car L4 2.4L DOHC 16 valve . . . . . . . .$19.99

ES72131 89-95 FORD Car v6 3.8L 2 req . . . . . . . . . . . . . .$18.99

ES72172 95-97 GM Car L4 2.2L & 95-97 GM Trk L4 2.2L .$18.99

ES72723 85-94 CHR Car L4 2.2L & 85-90 TURBO . . . . . . . .$18.99

ES72724 82-93 GM Trk, L/D V8 6.2L Diesel & 92-01

Turbo Diesel 2 req . . . . . . . . . . . . . . . . . . . . . . .$22.99

ES72733 85-92 GM Car L4 2.5L & 85-93 GM Trk L/D L4 2.5L$15.99

ES72794 90-01 Ford Trk v6 4.0L OHV incl MAZ Trk . . . . . .$34.99

ES74016 93-94 GM Car L4 2.2L & 94 GM Trk L4 2.2L . . . . .$16.99

ES74018 87-89 GM Car V6 2.8L & 88-94 GM Car 3.1 . . . . .$21.99

Exhaust Flange Bolt &Spring KitNew Exhaust Bolt & Spring Kits are needed toensure a tight exhaust flange seal. Comes with 2bolts/studs, 2 springs and 2 nuts (where required).

ES72140 GM Call with Application .$4.99ES72141 GM Call with Application .$5.99ES72142 Ford Call with Application $5.99ES72143 Chrysler 2.6 81-87

Call with Application . . . . .$5.99

S/B ChevyCompleteEngineBolt KitsShow quality chromeplated fasteners areavailable in yourchoice of Grade 5 hexhead or Grade 8twelve point head.The bolt heads ofthese quality fasteners

are individually polished to high luster, thenchrome plated for lasting beauty. Complete Engine Bolt Kits - Include Intake,Timing Cover, Oil Pan, Fuel Pump, Water Neck,Long Water Pump, Headers.

5001 Hex Head Style . . . . . . . . . . .$68.99

Chrome Plated RearEnd Cover BoltsGM 10 Bolt, 10 each, 5/16"-18 x 3/4" hex

5014 . . . . . . . . . . . . . . . . . . . . .$12.99

GM 12 Bolt, 12 each, 5/16"-18 x 3/4" hex

5016 . . . . . . . . . . . . . . . . . . . . .$15.99

Flywheel andPressure PlateBoltsEngineered and manufactured for reli-ability, these alloy steel drive train fas-teners are heat treated to Grade 8specifications for extra strength. Kitsare complete with lock washers(where needed) and are black platedto help resist rust and corrosion.

Pressure Plate Bolts

910 GM, Chrysler, AMC (Borg-Beck/Diaphragm style)3/8"-16 x 1" 6 per set .$4.99

911 Ford, (all Long style)5/16"-18 x 1" 6 per set $4.99

Flywheel Bolts

912 Chevrolet, Ford 7/16"-20 x 31/32" 6 per set . . . . . . . . . . . . . . . . .$5.99

914 Pontiac1/2"-20 x 1" 6 per set $6.99

Cylinder HeadDowel PinsThese hard-to-find dowel pins are pre-cision machined then case hardenedfor accurate alignment in engineassembly. Packaged two per set.

4375 Small Block Chevy and Mopar.

350 Pontiac 5/16" x 5/8"

2 pcs. . . . . . . . . . . .$1.994377 Big Block Chevrolet tubular

head dowel. .638/.639 O.D.

by 1/2" 2 pcs. . . . . . .$5.99

Timing CoverBoltsChrome Plated TimingCover BoltsChevy small and big block10 each, 1/4"-20 x 1/2" hex5008 . . . . . . . .$10.99

Zinc Plated Timing Cover BoltsChevy small and big block, 1/4"-20 x 1/2", 10pcs.6090 . . . . . . . . . . . . . . . . . . . . . . . .$4.99

Bolts, Studs, Rocker Arms & PlugsPE-100BR Brass Soft Plugs S/B Chevy . . . . . . . . . . . . . . . .$8.99PE-100R Steel Soft Plugs S/B Chevy . . . . . . . . . . . . . . . . .$2.99S-327 Cylinder Head Bolts S/B Chevy per head . . . . .$11.99S-350 Cylinder Head Bolts 350 Diesel per head . . . .$10.99850013 Screw-in Rocker Arm studs 3/8" Chevy and Ford$19.99S-1018 Head Bolt Washers 7/16" Stock . . . . . . . . . . . . .$2.99S-1024 Rocker Arm Balls S/B Chevy Grooved . . . . . . . . .$4.99S-1025 L/S Rocker Arms S/B Chevy 1.5 Ratio 3/8" . . . . .$4.99S-1041 High Performance Connecting Rod Nuts 3/8" . . .$2.99S-1100 Zinc Plated Oil Pan Bolts Stock S/B Chevy . . . . . .$1.99S-1105 Timing Cover Bolts Stock Chevy V8 . . . . . . . . . .$1.99S-1107 Timing Gear Bolts S/B Chevy . . . . . . . . . . . . . . .$1.99S-1110 Dowel Pin S/B Chevy . . . . . . . . . . . . . . . . . . . .$1.99S-1120 Clutch Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99S-1123 Flywheel Bolts S/B Chevy Manual Transmission . .$3.99S-1200 Header Bolts, 12pt. 3/8" . . . . . . . . . . . . . . . . . .$4.99

PIONEER Inc

Others Available

HarmonicBalancer Bolts

Made from grade 8alloy material andheat treated forsuperior strength,these harmonic bal-ancer bolts feature ahigh hex head to

prevent socket slippage while rotatingthe engine. An extra thick, parallelground washer is provided to allowfor a more accurate, uniform torque.Black plated finish, complete with splitlock washer to prevent looseningcaused by vibration.

7845 Chevy 283-400 S/B,

7/16" - 20 x 2-1/4" . . . . . .$9.997846 Chevy 396-454 B/B,

1/2" - 20 x 1-1/2" . . . . . .$10.997847 Ford all V8 except 351C,

5/8" - 18 x 2" . . . . . . . . .$12.99

Z-GateB&M’s best selling low cost shifter. The “Z” shape elimi-nates the possibility of overshifting and missing a gear.Great for street or strip. Cannot be used with reversepattern valve body.80681 GM, Ford, and Chrysler . . . . . $99.99

StarShifterIn normal mode it’s a straight line detent shifter. When the lever is in low, lift trigger and pull stick back to convert to ratchet action. Cannot be used with a reverse pattern valve body.80675 GM, Ford, and Chrysler . . . . . .$119.99

HammerIncludes neutral safety switch, backup light switch, lightedgear indicator and polished aluminum T-handle andcable. Can be used with reverse pattern valve body.Advanced ratchet control, Universal fit and chrome alu-minum “Hammer-Head” handle can be adjusted to suityour driving preference. 80885 GM, Ford, and Chrysler . . . . . . .$199.99

Light Truck MegaShifterKit includes a taller base and an adjustable floor mountfor proper installation in all light trucks.80680 GM, Ford (AOD*), and Chrysler $161.99

*(Requires 40496 instalation kit)

Temperature GaugeTemperature Gauge comes with a light kit, colorcoded dial face, anti glare ABS enclosure, all wiresand terminals, a special sending unit, and T-fittingfor easy installation.80212 . . . . . . . . . . . . . . . . . . . . . . . .$42.99

UnimaticIncludes neutral safety switch and black T-handle. Idealas a column shifter replacement for GM, Ford, Chryslerand 62-72 Aluminum Powerglide*80775 $99.99*Powerglide installation kit required #70497 cost $36.83. Cable not included.

Sport ShifterBase can be trimmed to custom fit any floor, Neutralsafety switch, backup light switch, lighted gear indica-tor, black T-handle and cable. 80776 GM, Ford Chrysler . . . . . . . . .$139.99

Shifter CablesPerformance Cables, with eyelet on one end and threads.80604 4-ft. cable . . . . . . . . . . . . . . . . . . . .$29.9980605 5-ft. cable . . . . . . . . . . . . . . . . . . . .$29.99(#80605 comes with all B&M shifters except Unimatic andConsole QuickSilver)

Drain Plug KitsOnly a few automatic transmissions are equipped withdrain plugs from the factory. Removing the pan to drain thefluid can be a mess. Simply remove the pan once, drill a

hole, bolt the B&M Drain Plug Kit in and eliminate messy oil splash forever.80250 All Transmission Pans . . . . . . . . . . . . . . . . . . . . . . .$7.99

Console MegashifterDesigned to fit factory console applications. Manual 4speed looks. Includes neutral safety switch, backuplight switch, lighted gear indicator, polished aluminumT-handle and cable.

80692 1982-92 Camaro and Firebird (will not fit 88-92 Firebird Formula) TH400, 350, 200 and 700-R4 . . . . . . . . . . . . . . .$152.99

80694 1973-81 Camaro and 1970-81 Firebird TH400, 350, 200 and 700-R4 . . . . . . . . . . . . . . .$152.99

Console QuickSilverDesigned to fit factory console applications. Includeslighted gear indicator and chrome knob. This top ofthe line ratchet action shifter provides performanceshifting without a trigger. To get into park or reversefrom drive or low gears simply lift the knob/stickassembly and move it forward into position.Cable not included.

80688 73-81 Camaro & 70-81 Firebird TH400 and 350 . . . .$149.99

MegaShifterThe MegaShifter is one of B&M’s most popular shiftersdue to its manual 4-speed look and ratchet action. Idealfor street and strip.80690 GM, Ford (AOD*), and Chrysler$159.99


QuickSilverTop of the line ratchet action shifter provides perform-ance shifting without a trigger.80683 GM, Ford (AOD*), and Chrysler $149.99


Manual Shifter KnobsB&Ms New manual shifter knobs are for use anywherethat style and performance matter. Designed to fitmost newer U.S. &. foreign O.E. shifters. These knobsare strong, comfortable, and install in minutes!80743 Tall leather . . . . . . . . . . . . . .$29.9980744 Short leather . . . . . . . . . . . . .$29.99

80745 Carbon fiber look . . . . . . . . . . . . . . . . . . . . . . . . .$29.9980746 Billet-look alum. . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99

Aluminum T-Handle80643 Chrome . . . . . . . . . . . . . . . .$29.9980659 Chrome with button . . . . . . .$37.9980641 Satin . . . . . . . . . . . . . . . . . . .$23.99 ShiftPlus Electronic Shift

ImproverThis new design allows you to improve the transmission’s

shifting performance without removing the transmission

pan or valve body. 50 state emissions legal. For cars and

light trucks. Great for performance, towing and RVs.

70380 For 93-98 GM rwd/4wd 4L60E & 4L8OE trans . . .$29.9970381 97 Expedition/Navigator, 95-97 Explorer, pickup

F-150, F-250, 94-97 F-350, 94-97 Mustang, Thunderbird & Cougar, 93-97 Lincoln Mark VIII . . .$34.99


Tran

smis

sion

& R

eare

nd

32

Aluminum Short ShiftersChikara Short Shifters reduce throw by approximately 40%for faster, more precise gear changes. Manufactured fromsolid aluminum, these short shifters accept Chikara Shiftknobs, as well as, other after market and stock knobs.5680 92-98 civic & 90-93 Integra . . .$59.995681 94-98 Integra . . . . . . . . . . . . .$59.995682 92-00 Nissan Sentra . . . . . . . . .$59.995694 93-00 Corolla . . . . . . . . . . . . .$59.997599 Mirage . . . . . . . . . . . . . . . . . .$59.99


Tran

smissio

n &

Reare

nd

33

WARNING: High stall torque converters create extra heat. Install asupplementary transmission oil cooler to control this extra heat or pre-mature transmission failure could occur. Transmission Oil Coolers Also Available

Hole Shot 2000 - 900-2100 RPM, 12" diameter, Mild Performance.

20416 (5) GM 65-91 TH400, TH425, TH375 (4) . . . . . .$159.9920416 GM 68-81 TH350, TH375B (6) . . . . . . . . . . . . .$159.9970416 (7) GM 82-84 TH-700-R4, all TH200C,

TH2004R 27 spline . . . . . . . . . . . . . . . . . . . . .$329.9970417 (7) GM 84-91 TH-700-R4 30 spline . . . . . . . . . . . .$329.99

Hole Shot 2400 - 2300-2500 RPM, 11" diameter, Mild to MediumPerformance.

20412 GM 65-91 TH400, TH425, TH375 (4) . . . . . . .$249.9920412 GM 68-81 TH350, TH375B (6) . . . . . . . . . . . . .$249.9970419 GM 84-91 TH-700-R4 30 spline . . . . . . . . . . . .$336.9970411 GM 62-73 Aluminum Case Powerglide . . . . . . .$289.9910415 (11) Chrysler 67-81 Torqueflite A-727 (1&6) . . . . . . .$289.9940412 Ford 66-91 C6 with 332, 352, 360, 390, 406,

427, 428, 429 cid with 1.848" crank pilot (3) . .$289.9940422 Ford 71-91 C6 289, 302, 351w 351C, 351M,

400, 460 cid with 1.375" crank pilot (3) . . . . . .$289.9950412 Ford 66-69 step case C4 with 10.5" bolt circle,

24 spline input shaft, 1.375" crank pilot . . . . . .$289.9950416 Ford 70-82 step case C4 with 10.5" bolt circle,

26 spline input shaft, 1.375" crank pilot . . . . . .$289.9940430 (2) Ford 80-92 AOD with 11.4" bolt circle,

1.375" crank pilot . . . . . . . . . . . . . . . . . . . . . .$319.99

Hole Shot 3000 - 2800-3200 RPM, 10" diameter, Serious PerformanceApplications.

20413 GM 65-91 TH400, TH425, TH375 (4) . . . . . . . .$359.9920413 GM 68-81 TH350, TH375B (6) . . . . . . . . . . . . .$359.9970421 (8) GM 84-91 TH-700-R4 30 spline . . . . . . . . . . . .$439.9910425 (10) Chrysler 67-81 Torqueflite A-727 (1&6) . . . . . . .$449.9940442 Ford 71-91 C6 289, 302, 351w 351C, 351M,

400, 460 cid with 1.375" crank pilot (3) . . . . . .$399.9950432 Ford 66-69 step case C4 with 10.5" bolt circle,

24 spline input shaft, 1.375" crank pilot . . . . .$409.9950436 Ford 70-82 step case C4 with 10.5" bolt circle,

26 spline input shaft, 1.375" crank pilot . . . . . .$419.9940431 (2) Ford 80-92 AOD with 11.4" bolt circle,

1.375" crank pilot . . . . . . . . . . . . . . . . . . . . . .$419.99

Hole Shot 3600 - 3400-3800 RPM, 10" diameter, Pro Street Applications.20425 GM 65-91 TH400, TH425, TH375 (4) . . . . . . . .$449.9920425 GM 68-81 TH350, TH375B (6) . . . . . . . . . . . . .$449.99

Nitrous Hole Shot Series Recommended for

Street Rod, Pro Street & Street Machines with Plate-Type Nitrous Systems. •Furnace brazed impeller • New precision steel alloy pump drive tube •New Heavy duty needle bearing between stator & impeller (not a thrustwasher) • Needle bearing between stator and turbine • Furnace brazedturbine • Dual pattern drive lugs on some GM Holeshots • New turbinehub • New springs & rollers in stator • Anti-balloon plateGM 65-91 TH400, TH425, TH375 (4), GM 68-81 TH350, TH375B (6)20480 Hole Shot 2400 . . . . . . . . . . . . . . . . . . . .$299.9920481 Hole Shot 3000 . . . . . . . . . . . . . . . . . . . .$469.9920482 Hole Shot 3600 . . . . . . . . . . . . . . . . . . . .$499.99

Torkmaster 2000 - 1900-2100 RPM, 12" diameter, MildPerformance, Not for Big Block.

20400 (5) GM 65-91 TH400, TH425, TH375 (4) . . . .$90.9920400 (5) GM 68-81 TH350, TH375B (6) . . . . . . . . .$90.9970420 GM 84-91 TH-700-R4 30 spline . . . . . . .$215.9910416 Chrysler 67-81 Torqueflite A-727 (1&6) . . .$153.9940427 Ford 71-91 C6 w/351C, 351M, 400M,

460 cid with 1.375" crank pilot (3) . . . . .$168.9950440 Ford 70-82 step case C4 with 10.5" bolt circle,

26 spline input shaft, 1.375" crank pilot .$163.9940437 (9) Ford 80-92 AOD with 11.4" bolt

circle, 1.375" crank pilot . . . . . . . . . . . . .$163.99

Torkmaster 2400 - 2300-2500 RPM, 11" diameter, MildPerformance, Not for Big Block.

20404 GM 65-91 TH400, TH425, TH375 (4) . . .$149.9920404 GM 68-81 TH350, TH375B (6) . . . . . . . .$149.9970418 (8) GM 84-91 TH-700-R4 30 spline . . . . . . . .$239.99

Torkmaster 3000 - 2800-3200 RPM, 10" diameter, MildPerformance, Not for Big Block

20402 GM 65-91 TH400, TH425, TH375 (4) . . .$228.9920402 GM 68-81 TH350, TH375B (6) . . . . . . . .$228.99

Traveler - 1800-1900 RPM, Same as OEM diameter, Motor Home/RVTowing, Furnaced Brazed

20423 GM 65-91 TH400, TH425, TH375 (4) . . . $239.9930423 GM 68-81 TH350, TH375B (6) . . . . . . . . $239.9970422 (9) GM 84-91 TH-700-R4 30 spline. . . . . . . . $314.9910402 Chrysler 67-81 Torqueflite A-727 (1&6) . . . $249.9940425 Ford 71-91 C6 w/351C, 351M, 400M,

460 cid with 1.375" crank pilot (3). . . . . . $259.99

HoleShot™ Series Torque ConvertersB&M’s best street/strip converters Fully furnace brazed fins in both the impeller and turbine

TorkMaster™ Series and Traveler™ Torque ConvertersNew precision pump drive tube • Pressure tested • Fully balanced

Converter Footnotes

1. Some Chryslers may require a special flexplate2. Non-lockup converter, no input shaft change or transmission

modification required3. Ford C6 converters are supplied with an 11-7/16" dia. bolt circle

mounting pattern, may require a flexplate change4. GM vehicles with variable pitch trans. must have the pump and

input shaft changed to a fixed pitch design to use a B&M converter5. Requires dual pattern flexplate or TH350 flexplate6. Will not fit lock-up converter or clutch converter models7. V8’s only. Retain lockup feature8. Non-lockup converter requires trans. modifications.

Parts are included9. Standard AOD lockup feature retained10.10425 has 10-1/2" Bolt Circle11.10415 has 11-1/8" Bolt Circle

NOTE: Like all aftermarket converters, B&M Torque Converters are remanufactured.


Tran

smis

sion

& R

eare

nd

34

TCI Roll Stop KitSimple to install, apply brake push roll stopbutton & release brake. Holds up to 3000psi on front brakes.861700 . . . . . . . . . . . .$74.99

Torque ConvertersSizzler - TCI’S MOST ECONOMICAL CONVERTER . Great for stock tomild performance. Also smoother idle in gear. Typical stall 300 to 600RPM over stockSaturday night special - Fully furnace brazed. Hardened pump hub.Typical stall 1900 RPMChevrolet1965-81 GM TH350, 375 with small bolt pattern (exc. lock up)

Sizzler 241538 . . . . . . . . . . . . .$84.99Sat. Night Special 241500 . . . . . . . . . . . .$149.99

1984-91 TH700R4 30 spline 1.703 PilotSizzler 242738 . . . . . . . . . . . .$189.99Sat. Night Special 242700 . . . . . . . . . . . .$279.99

1962-73 GM Alum. Case PowerglideSat. Night Special 741500 . . . . . . . . . . . .$169.99

1965-91 GM TH400, 425, 375 with wide bolt pattern (exc. lock up & variable pitch)

Sat. Night Special 241501 . . . . . . . . . . . .$159.99Ford1970-up C4 10.5 Bolt Circle, 26 spline, dipstick goes into Trans Case

Sizzler 450738 . . . . . . . . . . . .$159.99Sat. Night Special 450700 . . . . . . . . . . . .$179.99

1970-up C4 11.4 Bolt Circle, 26 spline, dipstick goes into Trans PanSat. Night Special 450900 . . . . . . . . . . . .$189.99

1971-91 C6 with 1.375 Crank Pilot (289, 302, 351, 400, 429, 460)Sizzler 441638 . . . . . . . . . . . .$159.99Sat. Night Special 441600 . . . . . . . . . . . .$171.99

Chrysler1967-81 Torque Flight 727 nonlockup, 24 spline

Sizzler 141538 . . . . . . . . . . . .$149.99Sat. Night Special 141500 . . . . . . . . . . . .$214.99

1972-80 Torque Command 727 non lockupSat. Night Special 751500 . . . . . . . . . . . .$199.99

Automatic Transmission Flexplates99403 168 teeth, 12-14 pitch, OE# 340296, 3991403

Chevy 350 . . . . . . . . . . . . . . . . . . . . . . . . .$19.9999404 168 teeth, 12-14 pitch, OE# 340298, 3991404

Chevy S/B 400 . . . . . . . . . . . . . . . . . . . . . .$24.9999992 168 teeth, 12-14 pitch, OE# 14001992

Chevy 454 . . . . . . . . . . . . . . . . . . . . . . . . .$29.9999280 164 teeth, 12 pitch, OE# D1AZ-6375-A

Ford 351M, 400 . . . . . . . . . . . . . . . . . . . . .$29.9999294 184 teeth, 12 pitch, OE# C5AZ-6375-D

Ford 360, 390 . . . . . . . . . . . . . . . . . . . . . .$34.9999529 153 teeth, 12 13/16" OEM# 471529

81-85 305 Car . . . . . . . . . . . . . . . . . . . . . .$24.9999761 168 teeth, 14.13", OE# 14088761

86-96 350 Chevy Trk . . . . . . . . . . . . . . . . . .$29.9999281 138 teeth, 11 5/8", OE# F1TZ-6375A

91-96 Ford Ranger 4.0 . . . . . . . . . . . . . . . .$39.99

FlexplatesSFI approved, NHRA/IHRA legal. Ideal for street or stripand will withstand engine speeds exceeding 6,000 RPM.GM Flexplates have a dual pattern to accept PG,TH350,TH400 & 700R-4 converters.

20230 Chevy V8 internal 168 tooth to 85 . . . . . . . . . . . . . . . . . .$67.9920232 SB Chevy 400 to 85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$75.9920233 Chevy 454 90-earlier . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.9920237 SB Chevy internal 153 tooth to 85 . . . . . . . . . . . . . . . . . . .$69.9920238 SB Chevy external 153 tooth 86-94 . . . . . . . . . . . . . . . . . .$79.9920239 4.3 V6, external SB V8 168 tooth 86-94 . . . . . . . . . . . . . .$79.99

Transmission OilCoolersK402 16,000 lbs 15 1/2" x 5" x 3/4" . . .$23.99K403 18,000 lbs 12" x 7 1/2" x 3/4" . . .$25.99K404 22,000 lbs 15 1/2" x 7 1/2" x 3/4" $30.99K405 26,000 lbs 15 1/2" x 10" x 3/4" . .$33.99Limited Lifetime Warranty

SuperCooler™ AutomaticTransmission CoolersB&M’s SuperCooler low pressure drop coolers reduce therisk of lube system failure. A controlled amount of auto-matic transmission fluid (ATF) is allowed to bypass thestacked plate core, passing through a self-regulating ori-fice which monitors resistance to flow. The result is high-ly efficient cooling that combines improved protectionagainst lube system failure with the required levels ofoptimal heat transfer.

70255 16,000 GVW 11" x 5-3/4" x 3/4" . . . . . . . . . . . . . .$41.9970268 19,000 GVW 11" x 7-1/2" x 3/4" . . . . . . . . . . . . . .$45.9970264 24,000 GVW 11" x 6" x 1-1/2" . . . . . . . . . . . . . . . .$52.99

Trick Shift• Pour in Performance • Ideal for performance, towing, and heavy duty applications • Not an additive! Best automatic transmission fluid available!80259 Quarts Only . . . . . . . . . . . . . . . . . . . .$3.99

Synthetic Trick ShiftB&M’s synthetic Trick Shift is suitable for all automatic transmis-sions including late model electronic controlled transmissions.Features the latest synthetic fluid technology. Not an additive,this safe and effective formula of extreme pressure agents,foam inhibitors provides a long service life for your transmis-sion. Synthetic Trick shift may be mixed with all other types of

ATF but works best by itself. 80286 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99

SFI Approved Flex Plates• Internally & Externally Balanced• Gold Anodized Finished• Double Welded• With SFI sticker

7013 S/B Ford 164 tooth 28.2 oz/in External . . . . . . . . . . . . . . .$49.997014 S/B Ford 164 tooth 50.5 oz/in External . . . . . . . . . . . . . . .$49.997016 S/B Chevy 153 tooth Internal . . . . . . . . . . . . . . . . . . . . . .$49.997017 S/B Chevy 168 tooth Internal . . . . . . . . . . . . . . . . . . . . . .$45.997018 S/B Chevy 168 tooth External-One piece rear main . . . . . . .$49.997020 S/B Chevy 168 tooth External . . . . . . . . . . . . . . . . . . . . . .$49.997021 B/B Chevy 168 tooth External . . . . . . . . . . . . . . . . . . . . . .$49.997022 B/B Chevy 164 tooth External-One piece rear main . . . . . .$49.997023 B/B Pontiac 166 tooth Internal . . . . . . . . . . . . . . . . . . . . .$49.997024 B/B Ford 71-93 164 tooth External . . . . . . . . . . . . . . . . . .$49.997025 B/B Ford 71-93 164 tooth Internal . . . . . . . . . . . . . . . . . .$49.99

Max ATFReducing operating temperatures and internal friction is the keyto optimum performance and reliability in an automatic trans-mission. Royal Purple's MAX ATF puts a tough, anti-friction filmon all moving parts. Recommended for all applications whereFord MERCON and GM DEXRON fluids are specified.RPMMATF-BQ Max ATF . . . . . . . . . . . . . .$6.99

• See Page 39 for Perma-Cool •


Tran

smissio

n &

Reare

nd

35

NEW! Clutch KitsNorthern Auto continues to bring qualityproducts to the aftermarket with theintroduction of Luk clutch kits. Eachclutch kit contains: Clutch, discs, releasebearing, pilot bushing or bearing, tool.

Part No. OD Spline Teeth Price01-034 Jeep 10 3/8 1 1/8 10 $166.9904-064 GM 11 3/4 1 1/8 10 $124.9904-065 GM 9 1/8 1 14 $99.9904-088 GM 9 1/8 1 14 $118.9904-115 Saturn 8 7/16 15/16 22 $153.9904-121 GM 11 1 1/8 10 $157.9904-122 GM 11 7/8 1 1/8 10 $172.9904-155 Isuzu 9 1/8 1 1/8 26 $164.9905-022 Eagle 7 7/8 7/8 20 $82.9905-048 Dodge 8 7/8 7/8 20 $143.9905-065 Dodge 10 3/8 1 3/8 10 $135.9905-073 Dodge 12 1/4 1 1/4 10 $237.9906-006 Nissan 9 7/16 1 24 $112.9906-040 Nissan 7 1/2 1 3/16 18 $88.9907-042 Ford 10 1/2 1 1/6 10 $137.9907-048 Ford 8 7/8 1 23 $114.9907-054 Ford 3 7/8 1 23 $122.9907-056 Ford 10 1 1/16 10 $128.9907-057 Ford 11 1 1/16 10 $154.9907-075 Ford 7 7/8 7/8 20 $138.9907-077 Ford 9 15/16 1 23 $146.9907-092 Ford 12 1/4 1 1/4 10 $221.9907-093 Ford 9 7/8 1 23 $138.9907-096 Ford 9 15/16 1 23 $138.9907-099 Ford 8 7/8 1 23 $129.9907-115 Mazda 8 7/8 1 23 $184.9907-128 Ford 11 1 1/16 10 $165.9907-131 Ford 12 1/4 1 1/4 10 $330.9907-154 Ford 13 1 1/4 10 $291.9908-008 Honda 8 1/4 7/8 21 $97.9908-014 Acura 8 7/8 1 24 $145.9908-022 Honda 8 1/4 7/8 20 $124.9916-057 Toyota 8 7/8 1 3/16 21 $94.9916-059 Toyota 91/4 1 13/16 21 $155.9916-089 Toyota 8 13/16 1 3/16 21 $116.99

Clutch KitsRhinoPac New Clutch Kits set the stan-dard when it comes to quality. That’sbecause RhinoPac kits contain only thehighest quality O.E.M style clutches,discs, and release bearings. All itemshave been engineered to the exactingspecifications required by major auto-mobile manufacturers. Utilizing a wide-range of patented technology, andbacked by an extensive 12month/12,000 mile warranty, everyRhinoPac kit has been developed witha specific vehicle’s driveline require-ments in mind. Supplementing that isadditional coverage offering heavy-duty and high-performance replace-ment options. It’s easy to understandhow RhinoPac offers nearly 100% cov-erage on all domestic and importapplications for passenger cars andlight trucks. Always have salesmandouble check your application.

NEW LOWER PRICES!

04-005 8-1/2" GM . . . . .$99.9904-020 11" GM . . . . .$106.9904-021 10-1/2" GM . . . .$93.9904-049 11" GM . . . . .$106.9904-064 12" GM . . . . . . .$99.9904-087 12" GM . . . . .$128.9904-088 9-1/8" GM . . . . .$96.9904-106 13" GM . . . . .$178.9904-121 11" GM . . . . .$139.9904-122 12" GM . . . . .$146.9904-518 12" GM . . . . .$119.9904-130 9-1/8" GM . . . . .$88.9904-502 12" GM . . . . .$115.9904-505 11" GM . . . . .$102.9906-040 7-1/2" Nissan . .$79.9906-038 9-1/2" Nissan . .$97.9907-010 8-1/2"Ford . . . .$79.9907-015 11" Ford . . . . . .$99.9907-016 10" Ford . . . . . .$88.9907-022 11" Ford . . . . .$106.9907-027 11" Ford . . . . . .$99.9907-031 11" Ford . . . . .$104.9907-041 9" Ford . . . . . . .$86.9907-048 9" Ford . . . . . . .$88.9907-054 9" Ford . . . . . . .$94.9907-069 8-1/2" Ford . . . .$81.9907-075 7-7/8" Ford . . .$110.9907-057 11" Ford . . . . .$124.9907-080 13" Ford . . . . .$168.9907-096 10" Ford . . . . .$135.9907-097 11" Ford . . . . .$139.9907-504 11" Ford . . . . .$137.9908-008 8-3/8" Honda . .$98.9908-014 8-7/8" Honda .$114.9916-016 8-7/8" Toyota . .$79.9916-057 8-7/8" Toyota . .$79.99

Includes Alignment

Tool!

Performance &Racing Clutches

On the street ortrack, in the dirt andon the water, raceafter race, recordholders in every classhave proven theexceptional perform-ance, durability andlong-term depend-ability of Hays

Clutches. With more than 40 years of research, develop-ment and testing, Hays has emerged as the leader inclutch performance technology. With Hays PerformanceClutches you can be assured of a product manufacturedfrom the finest quality materials and workmanship avail-able, in addition to support from a team of experts whoare easily accessible and ready to answer your technicalquestions and assist you in the installation and use of yourHays product. 85-100 Street Clutch Kit - 10.5" GM . . . . . .$239.9985-101 Street Clutch Kit - 10.5" GM . . . . . .$239.9985-102 Street Clutch Kit - 10.5" GM . . . . . .$239.9985-103 Comp/Truck Clutch Kit - 10.5" GM .$289.9985-104 Comp/Truck Clutch Kit - 10.5" GM .$289.9985-110 Street Clutch Kit - 11" GM . . . . . . . .$259.9985-111 Street Clutch Kit - 11" GM . . . . . . . .$259.9985-112 Street Clutch Kit - 11" GM . . . . . . . .$259.9985-113 Comp/Truck Clutch Kit - 11" GM . . .$289.9985-114 Comp/Truck Clutch Kit - 11" GM . . .$299.9985-120 Truck Clutch Kit - 12" GM . . . . . . . .$309.9985-200 Street Clutch Kit - 10" Ford . . . . . . .$214.9985-202 Street Clutch Kit - 10.5" Ford . . . . . .$259.9985-210 Street Clutch Kit - 11" Ford . . . . . . .$269.9985-211 Comp/Truck Clutch Kit - 11" Ford . .$289.9985-300 Street Clutch Kit - 10.5" Chrysler . . .$259.9985-301 Comp/Truck Clutch Kit - 10.5" Chrys $289.9985-310 Street Clutch Kit - 11" Chrysler . . . .$259.9985-311 Comp/Truck Clutch Kit - 11" Chrys .$299.99

Standard Transmission

FlywheelsPart # Application Replaces OE # Teeth Pitch O.D. Balance Clutch Size PriceFORDFS6000 65-79 240/300 E5TZ-6375K 164 12 14.23" Internal 11" $109.99FS6110 83-87 7.5L E5TZ-6375J 180 12 15.512" External 11" $149.99FS6302FM 86-95 302 E6ZZ-6375A 157 12-14 13.30" External 10 1/2" $129.99FS6351W 77-94 302 351W E8TZ-6375C 164 12 14.23" External 11" $149.99

CHEVROLETGS9201 55-85 Small Block 3991469 168 12-14 14.13" Internal 11" or 12" $94.99GS9202 70-90 454 3993827 168 12-14 14.13" External 11" or 12" $109.99GS9203 70-80 400 Small Block 3986394 168 12-14 14.13" External 11" or 12" $109.99GS9205 86-97 305-350 10105832 168 12-14 14.13" External 11" or 12" $119.99GS9206 91-95 454 10101169 168 12-14 14.13 External 11" $119.99GS9207 86-92 305 14088650 153 12-14 12.85" External 10.4" $139.99

JUST BECAUSE YOU DON’T SEE YOUR APPLICATION HERE, THAT DOESN’T MEAN WE DON’T HAVE IT.

CHANCES ARE WE DO - GIVE US A CALL FOR YOUR PRICE!

JUST BECAUSE YOU DON’T SEE YOUR APPLICATION HERE, THAT DOESN’T MEAN WE DON’T HAVE IT.

CHANCES ARE WE DO - GIVE US A CALL FOR YOUR PRICE!


Tran

smis

sion

& R

eare

nd

36

Deluxe Transmission Overhaul Kits Include: Transtech paper and rubber kit with sealing rings, seals, new steels (not tumbled) and Raybestos® friction clutches,adjustable modulator, front band, filter and popular bushings and washers.

Transmission Year Overhaul Kit Price Shift Kit Price Tech Manual Price

Chrysler

TF6 (A904) 60-71 K125H-R & K12900E-4 $47.99/$6.99 K22908B $20.99 12Y01 $14.99TF6 (A904) 72-up K125H-R $47.99 K22908B $20.99 12Y01 $14.99A500 88-up K125M-R $83.99 N/A 12Y03TF8 (A727) 62-70 K225D-R & K22950E-4 $63.99/$5.99 K22908B $20.99 12Y01 $14.99TF8 (A727) 71-up K225D-R $63.99 K22908B $20.99 12Y01 $14.99A518 Gas Engine 90-up K225M-R $117.99 N/A N/A(Diesel needs one each) R12755 $2.99

R12756 $1.99A404 78-80 K4800-R $64.99 N/A N/AA413-A470 81-82 K4800A-R $75.99 N/A N/AA413-A470 83-up K4800B-R $75.99 N/A N/AA604 88-up K7200-R $143.99 K72908J $17.99 72Y01, 72Y02+ $14.99 eaA606 93-up K7200A-R $150.99 K72908J $17.99 72Y03 $14.99FordC3 74-77 K2700R $78.99 K27908 $12.99 N/AC3 78-87 K2700A-R $77.99 K27908 $12.99 N/AC4 65-66 K2600C-R $52.99 K26908A $18.99 N/AC4 67-69 K2600C-R $52.99 K26908C $18.99 N/AC4 70-81 K2600H-R (push in mod) $48.99 K26908F $12.99 N/AC5 82-86 K2600M-R $56.99 K26908F $12.99 26Y01 $14.99C6 68-75 K3600A-R* $69.99 K36908B $14.99 36Y01 $14.99C6 76-96 K3600B-R $74.99 K36908B $14.99 36Y01 $14.99A4LD 85-89 K2700D-R $105.99 K27908J $20.99 27Y02 $14.99

(Contains 2WD Filter)A4LD 90-up K2700F-R $110.99 K27908J $20.99 27Y02 $14.99A0D (FI0D) 80-83 (early) K5300-R $88.99 K53908 $25.99 53Y01 $14.99A0D (FI0D) 83-90 (late) K5300A-R $85.99 K53908 $25.99 53Y01 $14.99

(Use with Cast Drum)A0D (FI0D) 90-93 K5300B-R $99.99 K53908 $25.99 53Y01 $14.99

(Use with Stamped Steel Drum)ATX 81-84 K5700-R $101.99 K57908 $23.99 57Y01 $14.99ATX 85-91 K5700A-R $101.99 K57908 $23.99 57Y01 $14.99AX0D 86-87 K6700-R $139.99 K67908 $56.99 67Y01, 67Y02+ $14.99 eaAX0D 88-up K6700A-R $144.99 K67908 $56.99 67Y01, 67Y02+ $14.99 eaAX0DE 91-up K6700E-R $137.99 K67908E $45.99 67Y03 $14.99E40D 89-95 K7300-R* $151.99 K73908 $24.99 73Y01, 73Y02+ $14.99 ea

(Contains 2WD Filter)FMX 68-72 K600M-R $63.99 K6253C $15.99 N/AFMX 73-81 K600M-R $63.99 K6253D $15.99 N/A

GMPowerglide (No Band) 62-73 K2800B-R $66.99 N/A N/A4L80E (MT1) 91-96 K3400E-R $166.99 K34908E $45.99 34Y02 $14.99TH400 67-up K3400D-R $68.99 K34908 $17.99 34Y01 $14.99TH200 76-78 K3200B-R $79.99 K32908 $16.99 32Y01 $14.99TH200C 79-87 K3200A-R $73.99 K32908A $16.99 32Y01 $14.99TH200R4 (MW9) 81-90 K3200M-R $97.99 K32908M $34.99 32Y02 $14.99TH125 (M34) 80-84 K5100-R $65.99 K51908 $19.99 51Y01, 51Y02+ $14.99 eaTH125C (MD9) 85-up K5100A-R $72.99 K51908 $19.99 51Y01, 51Y02+ $14.99 eaTH250C 80-84 K3500G-R $81.99 K35908 $14.99 N/ATH325 79-81 K3200D-R $91.99 K32908D $28.99 N/ATH325-4L 82-85 K3200E-R $113.99 K32908E $34.99 32Y04 $14.99TH350/350C 69-86 K3500F-R $67.99 K35908 $14.99 35Y01 $14.99TH440T-4 (4T60) 83-86 K6600A-R $133.99 K66908J $25.99 66Y01, 66Y02+ $14.99 eaTH440T-4 (4T60) 87-88 K6600B-R $138.99 K66908J $25.99 66Y01, 66Y02+ $14.99 eaTH440T-4 (4T60) 89-up K6600C-R $143.99 K66908J $25.99 66Y01, 66Y02+ $14.99 eaTH440T-4 (4T60E) 91-94 K6600E-R $166.99 K66908E $66.99 66Y03 $14.99TH440T-4 (4T60E) 95-up K6600F-R $234.99 K66908E $66.99 66Y03 $14.99TH700R-4 82-84 K6100-R $101.99 K61908J** $20.99 61Y01, 61Y02+ $14.99 eaTH700R-4 85-86 K6100A-R $101.99 K61908J** $20.99 61Y01, 61Y02+ $14.99 eaTH700R-4 87-up K6100B-R $101.99 K61908J** $20.99 61Y04, 61Y02+ $14.99 ea4L60E 93-96 K6100E-R $122.99 K61908E $37.99 61Y03, 61Y05+ $14.99 eaTH425 66-78 K3400B-R $100.99 K34908A $12.99 N/A

* Comes without Modulator**K61908 This Kit Contains: Servo, Accumulator, Governor and Valve body parts and fits same application as K61908J. Price $36.99+ Update

Transmission kits available for all makes & models

Shift Improver Kits TransGo® No Yo Yo® Fixes the problem that causes transmission failure.


Tran

smissio

n &

Reare

nd

37

Transpak™

Recalibrate your automatic transmission for better per-formance and improve transmission life. The next stepbeyond the Shift Improver Kit, provides additional driv-er manual control. With Transpak you can downshift atany speed*, you can also hold the transmission in firstgear to any speed that you want.* (*Except C-4, AOD, TH-200-4R and TH-700-R4 and4L60E)

Chevrolet, GMC, Pontiac, Olds, and Buick35229 81-88 Turbo-Hydro 2004R . . . . . . . . . . . . . . . . . . . . .$55.9970235 82-91 Turbo-Hydro 700R4 (4L60) . . . . . . . . . . . . . . . .$55.9920227 88-94 Turbo-Hydro 400 (3L80) . . . . . . . . . . . . . . . . . .$55.9920228 65-87 Turbo-Hydro 400, 375, and M40 . . . . . . . . . . . .$55.9930228 68-81 Turbo-Hydro 350, 375B, and M38 . . . . . . . . . . .$55.9930235 80-86 Turbo-Hydro 350-C . . . . . . . . . . . . . . . . . . . . . .$55.9970228 62-73 Powerglide (aluminum case) . . . . . . . . . . . . . . .$55.99Ford, Lincoln, and Mercury 40227 80-92 AOD (Ex. 92 and later with elec. shift) . . . . . . . .$55.9940228 67-91 C6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.9950227 64-66 C4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.9950229 70-82 C4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99Chrysler, Dodge, Plymouth10228 62-77 Torqueflite A-727 . . . . . . . . . . . . . . . . . . . . . . .$55.9910227 78-79 Torqueflite A-727 with non lock-up converter . . .$55.9910228 66-77 Torqueflite A-904 with 6 cyl. eng. . . . . . . . . . . .$55.9910228 68-77 Torqueflite A-904 with V8 engine . . . . . . . . . . .$55.9910227 78-79 Torqueflite A-904 w/ V8 and non lk-up converter $55.99

Tranny Filters & Gasket KitsAFK35710 TH350 69-86 . . . . . . . . . . . . . . . . . . . . . . . .$3.99AFK34661A GM TH400 67-UP . . . . . . . . . . . . . . . . . . . . . .$4.99FK28739A Alum Powerglide 62-73 . . . . . . . . . . . . . . . . .$6.99AFK61710 GM TH700R4 82-UP . . . . . . . . . . . . . . . . . . . .$7.99AFK12776C Chrysler 727/904 . . . . . . . . . . . . . . . . . . . . . .$4.99AFK26422B Ford C4 70-81 . . . . . . . . . . . . . . . . . . . . . . . .$4.99AFK36423B Ford C6 Truck Except Truck & 4WD 76-UP . . . .$4.99FK36423C Ford C6 Truck & 4WD 73-UP . . . . . . . . . . . . . .$8.99

Shift Improver Kit™

• Improves the shift feel and quickness on any stockautomatic transmission

• Elimination of sluggish shifts, shift overlap, andexcess wear on clutches and bands due to slippage

• Improves transmission life The Shift Improver Kit canbe installed in two modes:

• STAGE 1-RV/HEAVY DUTY - for regular passenger vehicles, RV’s, fleet, etc. or

• STAGE 2-STREET/STRIP - for the enthusiast who wants the hardest, quickest possible shift

Chevrolet, GMC, Pontiac, Olds, and Buick20261 88-94 Turbo-Hydro 400 (3L80) . . . . . . . . . . . . . . . . . . .$27.9920260 65-87 Turbo-Hydro 400, 375, and M40 . . . . . . . . . . . .$26.9930262* 68-81 Turbo-Hydro 350, 375B, and M38 . . . . . . . . . . .$26.9935265 81-90 Turbo-Hydro 200-4R . . . . . . . . . . . . . . . . . . . . . .$27.9970239 82-93 Turbo-Hydro 700-R4 . . . . . . . . . . . . . . . . . . . . . .$27.99Ford, Lincoln, and Mercury40262 67-91 C6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.9940263 80-92 AOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.9950260 67-69 C4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.9950262 70-82 C4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.99Chrysler, Dodge, Plymouth10226 66-70 Torqueflite A-727 . . . . . . . . . . . . . . . . . . . . . . . .$27.9910225 71-77 Torqueflite A-727 . . . . . . . . . . . . . . . . . . . . . . . .$27.9910232 78-79 Torqueflite A-727 w/non lk-up conv . . . . . . . . . .$27.9910226 66-77 Torqueflite A-904 with 6 cyl. eng. . . . . . . . . . . . .$27.9910226 68-70 Torqueflite A-904 with V8 engine . . . . . . . . . . . .$27.9910225 71-77 Torqueflite A-904 with V8 engine . . . . . . . . . . . .$27.9910232 78-79 Torqueflite A-904 w/ V8 and non-lock-up converters$27.99*For TH-350C use TransPak #30235

Master Racing Overhaul KitIncludes all B&M high performance friction

materials for a complete high performance or

racing transmission overhaul.

21040 Powerglide . . . . . . . . .$159.9921041 TH-400 . . . . . . . . . . . .$130.9921042 TH-350 . . . . . . . . . . . .$128.99Doesn’t include valve body components otherthan OEM valve body gaskets or instructions

Performance Tranny KitsTH350HP 69-86 . . . . . . . . . . . . . . . . . . . .$109.99TH400HP 67-up . . . . . . . . . . . . . . . . . . .$119.99

ManualpakFull manual control eliminates all automatic shift features.Provides full competition shift performance. Features astandard shift pattern30219 68-79 Turbo-Hydro 350, 375B and M38 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

Pinion Setting Tool66516 . .$129.99

ReTechTransfer Case MotorsPremium Quality Remanufactured Transfer Case Motors.• Warranty 12 months or 12,000 miles• Core Charge• 100% tested for draw and torque• Guaranteed OE fit• Shift position sensor fully tested

UMM1233 1993-97 S10 . . . . . . . . . . . . . . . . . . . . . . . . . .$97.99UMM1243 1996-00 Blazer, Tahoe, Yukon, Suburban . . . . .$97.99UMM4350 1986-90 Bronco II, Ranger . . . . . . . . . . . . . . .$92.99UMM4354 2000-01 Ranger . . . . . . . . . . . . . . . . . . . . .$109.99UMM4356 1987-97 Bronco, F Series . . . . . . . . . . . . . . .$109.99UMM4405 1995-98 Explorer 4.0 . . . . . . . . . . . . . . . . . .$109.99

Check Application Before Ordering • Prices do not include core charge

Street FighterTransmissionsTough, hard shifting transmissions.Equipped with our Manual/Automaticvalve body. Perfect for the street carenthusiast. More ApplicationsAvailable! Call With Yours.

GM 1981-93 TH-700R4, 30 spline, 30-1/2" overall length371000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1299.99TH-350 non lock up w/ 6" tailshaft311000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$789.99

Ford 8.0”62-70 Falcon, 65-79 Mustang, 64-72 Comet, 67-72 Cougar and 60-72 Fairlane

Ratio Part# Price3.55 49-0101-1 $190.994.11 69-0064-1 $166.994.62 69-0065-1 $162.99

Tran

smis

sion

& R

eare

nd

38

Chrysler 12 Bolt - 8.75” Casting Number 74257-68 Chrysler, Dodge and Plymouth8-11/16" x 10-19/32" 10 holesRatio Part# Price4.10 69-0045-1 $181.994.56 69-0047-1 $181.99

Ratio Part# Carrier PriceFord 9.0"

3.50 F9350 $149.993.70 F9370 $149.993.89 F9389 $149.994.11 F9411 $149.994.56 F9456 $149.994.86 F9486 $149.99GM 10 Bolt-7.5" and 7.625"

3.42 GM75342 3 $149.993.42 GM75342T 2 $159.993.73 GM75373 3 $149.993.73 GM75373T 2 $159.994.10 GM75410 3 $149.994.10 GM75410T 2 $159.99(2) 3.08 ratio and numerically lower carrier

(3) 3.23 ratio and numerically higher carrier

GM 10 Bolt-8.5"

3.42 GM85342 $149.993.73 GM85373 $149.994.10 GM85410 $149.994.56 GM85456 $149.99GM 12 Bolt-8.875"3.08 12BT308 $149.993.42 12BT342 $149.993.73 12BT373 $149.993.73T 12BT373T $159.994.10 12BT410 $149.994.10T 12BT410T $159.994.56 12BT456 $149.994.56T 12BT456T $159.99T = 340 & numerically lower carrier

Ford 9.0”65-73 Mustang/Cougar, 57-87 Light Trucks, 57-73 Ford/Mercury/Thunderbird11-3/4" 10 holes Oval

Ratio Part# Price3.50 49-0027-1 $164.993.70 69-0361-1 $200.993.89 69-0177-1 $162.994.11 69-0179-1 $156.994.33 69-0161-1 $190.994.56 69-0185-1 $158.994.71 69-0362-1 $196.994.86 69-0067-1 $171.995.00 69-0360-1 $271.99

Ford 8.8”81-up F-100/150/250/Bronco, 85-up Mustang10-9/16" x 10-13/16" 10 holes Oval

Ratio Part# Price3.55 49-0103-1 $201.993.73 49-0104-1 $201.994.10 69-0310-1 $201.994.56 69-0312-1(C)$201.99

Dana 6066-72 Dodge and Plymouth with 4 speed, 67-85 F-100/150 rear, F250 front and rear, 69-84 Chrysler W-200 front and rear9-3/8" x 10-1/4" 10 holes Oval

Ratio Part# Price4.10 69-0052-1 $171.994.56 69-0053-1 $171.994.88 69-0054-1 $174.995.13 69-0057-1 $188.99

Chrysler 12 Bolt - 8.75” Casting Number 48969-73 Chrysler, Dodge and Plymouth8-11/16" x 10-19/32" 10 holes

Ratio Part# Price3.91 69-0058-1 $196.994.10 69-0059-1 $196.994.30 69-0060-1 $196.994.57 69-0061-1 $196.99

GM 12 Bolt - 8.875” (C) Axle65-72 Chevrolet, 65-72 Chevelle, 65-72 ChevyII/Nova, 67-72 Camaro, 70-72 GTO/Firebird, 68-69Olds F-85. 10-7/8" 12 holes OvalRatio Part# Carrier Price3.55 49-0095-1 3 $196.993.73 49-0039-1 3 $146.993.08 49-0094-1 3 $201.993.73 49-0096-1 4 $195.993.90 49-0040-1 3 $170.994.10 69-0031-1 4 $141.994.10 69-0304-1 3 $161.994.56 69-0032-1 4 $141.994.56 69-0306-1 3 $161.994.88 69-0308-1 3 $173.994.88 69-0033-1 4 $136.995.14 69-0034-1 4 $143.995.38 69-0035-1 4 $176.99(3) 3.07 to 3.73 ratio carrier(4) 3.90 ratio and numerically higher carrier

GM 12 Bolt - 8.875” Truck64-82 K10 and 20 and Blazer, 11-1/2" 12 holesIrregularRatio Part# Carrier Price3.08 49-0068-1 3 $171.993.42 49-0070-1 3 $191.993.73 49-0072-1 3 $196.993.73 49-0280-1 4 $166.994.10 69-0204-1 4 $172.994.10 69-0350-1 3 $194.994.56 69-0206-1 4 $172.994.56 69-0352-1 3 $201.994.88 69-0298-1 4 $166.99(3) 3.40 ratio and numerically lower carrier(4) 3.73 ratio and numerically higher carrier

GM 10 Bolt - 8.2”, 25 Spline65-70 Chevrolet, 64-72 Chevelle, 64-72 Chevy, II/Nova,67-70 Camaro.10-5/8" 10 holes Irregular, 11" 10 holes Oval

Ratio Part# Price3.55 49-0015-1 $191.994.11 69-0159-1 $151.994.56 69-0028-1 $161.99

GM 10 Bolt - 8.5” 70-76 Chevrolet, 70-76 Chevelle, 70-75 Nova, 70-81Camaro, 70-81 GTO/Firebird, 72-81 Z28/TA, 77-87C10, K10/20, Front, 77-91 Blazer, Front, 80-94 C/K10and Blazer, Rear 10-5/8" 10 holes Irregular, 11" 10holes OvalRatio Part# Price3.08 49-0017-1 $181.993.23 49-0019-1 $191.993.42 49-0278-1 $175.993.70 49-0033-1 $181.993.73 49-0041-1 $166.993.90 49-0034-1 $181.994.10 69-0165-1 $157.994.56 69-0167-1 $161.994.88 69-0169-1 $161.995.13 69-0171-1 $171.995.38 69-0173-1(B) $194.995.57 69-0175-1(B) $185.99

GM 10 Bolt - 7.5” and 7.625”77-up all GM Models (exc. Monza/Vega/Starfire), 82-94 Camaro/Z28/Firebird/TransAm, 83-94 S-SeriesTrucks/Astro 8-5/16" x 10-9/16" 10 holes OvalRatio Part# Carrier Price3.08 49-0001-1 2 $216.993.42 49-0045-1 3 $187.993.42 49-0005-1 2 $195.993.73 49-0046-1 3 $181.993.73 49-0007-1 2 $195.994.10 69-0322-1 3 $183.994.10 49-0009-1 2 $195.994.56 69-0324-1 3 (A) $183.994.56 69-0326-1 2 (A) $204.99(2) 3.08 ratio and numerically lower carrier(3) 3.23 ratio and numerically higher carrier

RichmondInstructionalInstallation VideoThis video shows you how to install ringand pinion gear sets. It covers popularAmerican Motors, Chrysler, Ford and GM.Part #VIDEO . . . . . . . . . . . . .$16.99

Richmond SyntheticGear Oil

Designed for all temperatureextremes. Improved durabiltyand effiency. Made with speciallimited slip additive.

75W-140 Quart

Part #LUBE . . . . . . . .$9.99

Complete Installation Kits

Includes:• Cover gasket • Ring gear boltsand washers • Crush sleeve • Marking com-pound and brush • Pinion and carrierbearings • Pinion nut andwasher • Pinion seal • Thread lockingcompound • Silicone sealer • Pinion and carriershims.

Prices Start at . . . . . . . . . . . .$100.99

Power Transfer PartsSame Quality as

Name Brand Gears, but without the

Name Brand Price

(A) Cross Pin #80-0270-1 Required(B) Cross Pin #80-0272-1 Required(C) Requires Special Cross Pin Ask Your Sales Person

Made in the USA

Ratio Part# Price5.14 69-0068-1 $172.995.29 69-0270-1 $211.995.43 69-0069-1 $173.995.67 69-0070-1 $173.995.83 69-0288-1 $179.996.00 69-0199-1 $180.996.20 69-0290-1 $181.996.33 69-0276-1 $188.996.50 69-0197-1 $180.99

Richmond HalfInstallation Kits

If you are replacing a ring and pinion setthis kit is a must. Contains pinion shims,crush sleeve, pinion seal and cover gas-ket.Prices Start at $20.99


Tran

smissio

n &

Reare

nd

39

Motive Gear Performance This gear has taken the performance market by storm. Motive GearPerformance became the official gear of ARCA in 1997 and is currentlyin use by many of the top names in NASCAR, BUSCH, ARCA, NHRA &IHRA, to name a few. Proven time and again at tracks like Daytona andTalladega, this gear holds up to the test. Made with the highest qualityeuropean material. Strict tolerances are met from the forging qualityeuropean material. Strict tolerances are met from the forging processto the heat treating process. Manufactured by a single factory insuresperfect set up every time. Ideal for any application, but we highly rec-ommend using in vans or car applications were noise may be a factor.

Chrysler 8.75 - 741 CastingC887355M 3.55 $209.25C887373M 3.73 $209.25

Chrysler 8.75 - 489 CastingC887355L 3.55 $209.25C887373L 3.73 $209.25C887391L 3.91 $209.25

Ford 8”F880300 3.00 $184.95F880325 3.25 $184.95F880355 3.55 $184.95F880411 4.11 $184.95

Ford 8.8”F888390 3.90 $184.99F888430 4.30 $184.99F888456 4.56 $174.99F888488 4.88 $184.99F888514 5.14 $184.99F888571 5.71 $184.99F888614 6.14 $184.99

Ford 9”F890300 3.00 $159.99F890325 3.25 $159.99F890350 3.50 $159.99F890370 3.70 $159.99F890389 3.89 $159.99F890411 4.11 $159.99F890430 4.30 $159.99F890457 4.57 $159.99F890471 4.71 $159.99F890500 5.00 $159.99

Ford 9”F890514 5.14 $149.99F890529 5.29 $159.99F890543 5.43 $149.99F890567 5.67 $149.99F890583 5.83 $159.99F890600 6.00 $159.99F890620 6.20 $159.99F890633 6.33 $159.99F890650 6.50 $159.99

GM 7.5” - 10 Bolt3.23 and Numerically HigherG875308 3.08 $169.99G875342 3.42 $169.99G875373 3.73 $169.99G875410 4.10 $169.99G875456 4.56 $169.99

GM 8.2” - 10 Bolt 64-72 CarG882411 4.11 $169.99G882456 4.56 $169.99GM 8.5” - 10 BoltG885308 3.08 $169.99G885342 3.42 $169.99G885373 3.73 $169.99G885410 4.10 $169.99G885456 4.56 $169.99G885488 4.88 $169.99G885513 5.13 $169.99

GM 8.875” - 12 Bolt Car3.90 and Numerically HigherG888342 3.42 $159.99G888411 4.11 $159.99G888456 4.56 $159.99

The Motivator - The “Price” LineThese quality gears are 8620 material and made at the finestmanufacturers in the pacific rim. Perfect for off-road or liftedtruck applications, these gears are warranted for one (1)year from manufacturers defects. Available in plain, white orgreen boxes with foam inserts and generic instruction sheet.

Motive Gear - “Blue Box” LineThis gear set the standard before there was one.Manufactured in Europe with quality 8620 material, madeto our exacting specifications, perfect for car or truck appli-cations, when price and quality will make the sale.Warranted for one (1) year against manufacturer defect.Comes in attractive blue Motive Gear box with their foamand instruction sheet. Available in 2.73 to 4.86 ratios.

AMC Model 20AM20-373 3.73 $175.50AM20-410 4.10 $175.50

Chrysler 8.25” - 10 BoltC8.25-355 3.55 $222.00C8.25-390 3.90 $222.00C8.25-410 4.10 $222.00

Chrysler 9.25” - 12 BoltC9.25-355 3.55 $222.75C9.25-390 3.90 $222.75C9.25-410 4.10 $222.75

Dana 44D44-373 3.73-STD. CUT $169.99D44-373F 3.73-REV. CUT $182.25D44-409 4.09-STD. CUT $169.99D44-409F 4.09-REV. CUT $169.99D44-456 4.56-STD. CUT $169.99D44-456F 4.56-REV. CUT $189.00D44-489 4.89-STD. CUT $169.99D44-489F 4.89-REV. CUT $182.25D44-513F 5.13-REV. CUT $182.25D44-538 5.38-STD. CUT $169.99D44-538F 5.38-REV. CUT $182.25

Dana 60D60-410 4.10 $169.99D60-456XF 4.56-REV. CUT THICK $222.75D60-488XF 4.88-REV. CUT THICK $222.75D60-513 5.13 $209.25Ford 7.5”F7.5-373 3.73 * $169.99F7.5-410 4.10 * $169.99* Requires F7.5 CS Cross Shaft

Ford 8.8”F8.8-355 3.55 $169.99F8.8-373 3.73 $175.50F8.8-410 4.10 $175.50

Ford 10.25”F10.25-355 3.55 $236.25F10.25-373 3.73 $236.25F10.25-410 4.10 $236.25F10.25-456 4.565 $263.25

GM 7.5”GM7.5-342 3.42 $169.99GM7.5-373 3.73 $169.99GM7.5-410 4.10 $169.99

GM 12 Bolt Truck 8 7/8”3.73 and Numerically HigherGM12-308 3.08 $169.99GM12-342 3.42 $169.99GM12-373 3.73 $169.99GM12-411 4.11 $169.99GM12-411X 4.11 $169.99GM12-456 4.56 $169.99

GM 9.5 - 14 BoltGM9.5-342 3.42 $195.75GM9.5-410 4.10 $195.75GM9.5-456 4.56 $202.50

GM 10.5” - 14 Bolt4.56 and Numerically HigherGM10.5-410 4.10 $195.75GM10-5-456 4.56 $195.75

Motive Gear Performance AX Series

Ford 9”F9-350A 3.50 $146.99F9-456A 4.56 $146.99F9-486A 4.86 $146.99

Ford 8.8”F8.8-355A 3.55 $146.99F8.8-410A 4.10 $146.99F8.8-456A 4.56 $146.99

GM 8.5” - 10 BoltGM10-342A 3.42 $146.99GM10-373A 3.73 $146.99GM10-411A 4.11 $146.99GM10-456A 4.56 $146.99

GM 8 7/8” - 12 Bolt TruckGM12-342A 3.42 $146.99GM12-373A 3.73 $146.99GM12-411A 4.11 $146.99GM12-456A 4.56 $146.99

The industry’s first factory light-weight racing gear, available innever available before gear ratios:6:66, 6:83, 7:00, 7:16, 7:33.Already taking NASCAR divisionsby storm, This extremely durablegear set is set to dominate racing.

Spool and HousingFord Full SpoolFS9-28 Full Spool 9”, 28 Spl. Steel $109.99FS9-28LW Full Spool 9”, 28 Spl. LW $119.99FS9-31 Full Spool 9”, 31 Spl. Steel $109.99FS9-31LW Full Spool 9”, 30 Spl. LW $119.99Ford Mini SpoolMS88-31 Mini Spool 8.8”, 31 Sp $109.99MS9-28 Mini Spool 9”, 28 Sp Steel $32.99MS9-28LW Mini Spool 9”, 28 Sp LW $36.99MS9-31 Mini Spool 9”, 31 Sp Steel $32.99MS9-31LW Mini Spool 9”, 31 Sp LW $36.99

Motive Gear, the Light Duty division of Midwest Truck & Auto Parts Inc, specializing inlight duty drivetrain components for truck and car applications, was established in 1984.Motive Gear is the industry leader in providing premium quality products, competitivepricing and unsurpassed customer service to the automotive market.

In an effort to provide you with the broadest range of quality products and to keep youcompetitive in the marketplace, a new division was established in 1994. Motive GearPerformance, specializing in performance differential components for street, stock car andstrip use, brings an exciting new product line to you while maintaining the levels of qual-ity, price and service which you’ve come to expect from Motive Gear.

Ford 9”F890666AX 6.66 $249.99F890683AX 6.83 $249.99F890700AX 7.00 $249.99F890716AX 7.16 $259.99F890733AX 7.33 $259.99


Gask

ets

40

S/B Chevy HeadGasketsCome with Perma Torque Blue Stripe and pre-flattened Wire rings in either steel or copper.

1003 265, 283, 302, 327, 350 Engines (steel wire ring) . . . . .$36.19 ea.1004 400 Engines and most aluminum blocks (steel wire ring) $36.24 ea.1010 All S/B V8’s w/ aluminum heads except some overbored

400 Engines (copper wire ring) . . . . . . . . . . . . . . . . . .$41.40 ea.1014 400 Engines and most aluminum blocks (steel wire ring) $34.92 ea.NOTE: Gasket has steam holes req. for street operation of 400 eng., & stainless

core for saltwater marine use.

1034 400 Engines and most Aluminum heads (steel wire ring) $38.66 ea.

B/B Chevy Intake Manifold GasketsOval port(Blocked Heat Crossover) 1.82" x 2.05" 1210 . . . . . $21.55Rectangle Port 1.82" x 2.54" 1211 . . . . . $16.75Oval port(Open Heat Crossover) 1.82" x 2.05" 1212 . . . . . $18.06

SnapUps™The oil pan SnapUps are engineered to hold up the oil pan gasketas well as the oil pan during the installation procedure.

ES 72863 Oil Pan Installation Aid for all 5/16" . . . .$4.09ES 72864 Oil Pan Installation Aid for all 6mm . . . . .$4.09ES 72865 Oil Pan Installation Aid for all 8mm . . . . .$4.09

HeadSaver® SpacerShimsThese .020" thick dead soft copper spacer shims

are used with conventional Fel-Pro head gaskets; they help restore themachined-away thickness. Complete installation instructions.

7733SP Small Block Chevy . . . . . . . . . . . . . . . . . . . . . .$13.27 Each9469SP 2.0 Chevy 87-89 . . . . . . . . . . . . . . . . . . . . . .$12.20 Each9296SP 2.2 Chrysler 81-94 . . . . . . . . . . . . . . . . . . . . .$14.11 Each

S/B ChevyHigh PerformanceFull Gasket SetChevy Small Block V8 283, 302, 327, and

350 engines, with stock or small intake and

exhaust ports*. Contains: (2) 1003 head gas-

kets, (1) 1256 Intake Manifold Gasket Set,

(1) 1444 Exhaust Header Set, (1) 1603 Valve

Cover Set-Blue Stripe Cork/Rubber 7/32", (1)

1803 Oil Pan Set-1975-79 thick front seal/left-hand dipstick and (1) 2702

R.A.C.E. Set-1959-85 Remainder to assemble a complete engine. * EXCEPT

MOST ALUMINUM BLOCKS

2802 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $108.73Also Available for Big Block Chev #2805 . . . . . . . . . . . . . . . . $131.72

Chevy S/B V8Exhaust Header GasketsFor 265, 267, 283, 302, 307, 327, 350 & 400 1955-85 (Steel Core Construction)1444 Square/Stock 1.38" x 1.38" . . . . . . . . . . . . . . . . . .$15.471404 Square/Stock or Small Race 1.50" x 1.50" . . . . . . . . .$15.431405 Square/Large Race 1.55" x 1.55" . . . . . . . . . . . . . .$17.301426 Round 1.59" Diameter . . . . . . . . . . . . . . . . . . . . . .$17.261406 D-Shaped 1.55" x 1.63" . . . . . . . . . . . . . . . . . . . . .$17.131407 Round (Hooker & Stahl Adaptor Plate) 1.81" dia. . . .$18.531408 Round (Hooker Adptr Plate for Lrg Tube Headers) . .$15.221409 Round (Brodix Spread Port) 1.81" dia. . . . . . . . . . . .$18.08

B/B Chevy Exhaust Header Gaskets1410 Square/Stock cast iron/early alum. 1.88" x 1.88" . . .$18.211411 Round/most stock alum. heads 1.94" diameter . . . .$18.211412 Round/large race 2.13" diameter . . . . . . . . . . . . . .$18.21

Perma DryPlusCritical areas are reinforced with precision sealing beads. Superior heatresistance provides extended gasket life. Time saving installation from a rigidcarrier system that provides an instant fit without adhesives. Torque limiterseliminate concerns of over torquingOS30061T 1965-90 GM V8 Big Block $33.10OS30522T 1985-94 GM V6 181, 231 ( B, C, E, L & 3) $26.33OS30570T 1987-96 Chrysler 3.0L $9.36OS30612T 1988-95 Chrysler 2.2L & 2.5L $29.43OS34509T 1957-74 GM V8 Small Block $26.79OS34510T 1975-85 GM V8 Small Block $25.89

Valve Cover GasketsBlue Stripe Cork Lam Extra Durable Steel Core Resists Blowouts,Extra Thick for Increased Valve Cover Clearance

1604 Most Small Block Chevys . . . . . . . . . . . . . .$31.09

1630 Most Big Block Chevys . . . . . . . . . . . . . . .$34.68

1636 Ford SVO V8, 351C, 351M, and 400 . . . . .$34.78

1637 Chevy 229, 262, 78-79 . . . . . . . . . . . . . .$32.09

S/B Chevy Intake Manifold GasketsSynthetic Rubber Bead for Super Sealing, Port Sizes for Perf. and Racing Engines.Most Sets with Blue Stripe Cork/Rubber end strips, S/B Chevy, Embossed Permatorque Blue Stripe

Size Part# PriceStock (Blocked Heat Crossover) 1.23" x 1.99" 1204 . . . $13.381/16" Thick with PrintosealStock (Open Crossover) 1.23" x 1.99" 1256 . . . $16.71Stock/Small Race 1.28" x 2.09" 1205 . . . $14.80Medium Race 1.34" x 2.21" 1206 . . . $15.24Large Race 1.38" x 2.28" 1207 . . . $15.57X-Large Race 1.38" x 2.38" 1209 . . . $16.73

B/B Chevy Head GasketsBig Block 396, 402, 427, 454 engines 65-84 454 GEN (Mark) IV (Perma Torque/Blue Stripe with preflattened steel wire ring) Gasket Bore: 4.540" Nominal Compressed Thickness: .041" Compressed Vol: 10.9 cc

1017-1 Each . . . . . . . . . . . . . . . . . . . . . .$40.06 ea.

(Perma Torque/Blue Stripe with preflattened copper wire ring)Gasket Bore: 4.370" Nominal Compressed Thickness: .039" Compressed Volume: 9.7 cc

1027 Each . . . . . . . . . . . . . . . . . . . . . . . .$47.44 ea.


Gask

ets

41

ENGINE MASTER PRO-SERIES GASKETS For Small Block Chevy V8

Valve Cover GasketsSuper Thick 5/16"1112 Set . . . . . . . . . . . . . . . . .$10.991114 Pack of 10 . . . . . . . . . . .$40.99

Silicon Beaded Intake SetsSet includes special water outlet and distribu-tor mounting gaskets. Special High TempFiber

5000 Port size 1.25 x 2.00 .$9.995010 Port size 1.25 x 2.125 $9.99

Ford 9" RearEnd GasketHigh Performance - ReusableAnti-Stick Pumpkin Gaskets

6905 Each . . . . . . . . . . . . .$2.996906 Pack of 10 . . . . . . . .$16.99

Extreme PressureCompressed FiberWater PumpMounting6102 Pack of 10 . . . . .$6.99

5505

5515

Special High TempFiber Port Size 1.42 x 1.42 stock and small race 5505 Set . . . . . . . . . . . . .$10.99

Special High TempFiberPort Size 1.465 x 1.625515 Set . . . . . . . . . . . . .$11.99

Kit GasketsOthersAvailable

BuickKS2636 231 A, 9 RWD 75-82 . . . . . . .$39.99KS2612 350 H, J, X 68-81 . . . . . . . . .$28.99KS2625 400, 430, 455 67-76 . . . . . . .$39.99ChevyKS2600 265, 283, 302, 307, 327, 350

57-80 . . . . . . . . . . . . . . . . . .$31.99KS2614 400 70-76 . . . . . . . . . . . . . .$39.99KS2618 396, 427, 454 65-76 . . . . . .$45.99ChryslerKS2114 318, 340 79-89, 68-73 . . . . .$44.99KS2110 361, 383, 400, 413, 440 63-78$42.99FordKS2328 302 68-11/30/82 . . . . . . . . .$46.99KS2308 351C, 351M, 400 70-79 . . . .$40.99KS2329 351W 75-7/10/83 . . . . . . . .$47.99

*Valley Pans Not Included

Gasket RemovalKitsThere’s an easier way to removegaskets and silicone! Our QuickChange Surface Conditioning Discsprovide time-saving convenience.The right tools for removal of gas-kets from heads, blocks, thermostathousing and water pumps.260010 (2" Diameter) $13.99260005 (3" Diameter) $14.99

5000

5010

5500

Full Gasket Kits Others AvailableBuick

953008VR 350 B, H, J, X 1968-81 . . .$28.99953009VR 400-430-455 1967-76 . . .$39.99Chevy953033VR 283, 307, 327, 350 Chevy V8

1957-80 . . . . . . . . . . . . .$28.99953031VR 400 Chevy 1970-80 . . . . .$39.99953026VR 454 Chevy 1970-79

( Except H/P) . . . . . . . . . .$43.99Chrysler953438VR 2.2L 1981-88 . . . . . . . . . .$47.99953338VR 318 2bbl 1975-78 . . . . . .$42.99953344VR 440 1972-80

(Except 440-3 Engine) . . .$42.99Ford

953367VR 302 1971-81 . . . . . . . . . .$45.99953030VR 351M/400 70-82 . . . . . . .$39.99

*Valley Pans Not Included

Intake ManifoldGasketsThe Ultra-Seal silicone beaded intakegasket is the perfect solution to elimi-nate sealing problems encounteredwith today's aluminum cylinder headsand intake manifolds. With small seal-ing surface areas between ports, anddifferent expansion rates of cylinderheads and intake manifolds. This gas-

ket is the first choice for these difficult sealing applications.SB-Chevy Ultra Seal5820 302-400, Stock Ports, 1962-Up . . . . . . . . . . . . .$12.995851 305/350 w/TPI, Stock Ports, 1986-92 . . . . . . . .$15.995821 1/16" Thick, Small Port 1.25"x2.13" . . . . . . . . . .$11.995822 1/16" Thick, Small Port 1.31"x2.19" . . . . . . . . . .$12.995812 1/8" Thick, Med Port 1.31"x2.19" . . . . . . . . . . .$18.995823 1/16" Thick, Large Port 1.31"x2.31" . . . . . . . . .$13.995824 1/16" Thick, X-Lg Port 1.38"x2.38" . . . . . . . . . .$13.99BB-Chevy Ultra Seal5827 All w/Oval Port . . . . . . . . . . . . . . . . . . . . . . . .$13.995828 All w/Rectangular Port . . . . . . . . . . . . . . . . . . .$13.995819 1/8" Thick, Rect. Port 41.78"x2.5" . . . . . . . . . . .$16.99Ford Ultra Seal5831 221-302 (exc. Boss), 1962-76 . . . . . . . . . . . . . .$14.995834 302 (exc. Boss), 1977-83 . . . . . . . . . . . . . . . . .$14.995835 5.0L EFI, 1986-up . . . . . . . . . . . . . . . . . . . . . .$14.995832 351W, 1969-83 . . . . . . . . . . . . . . . . . . . . . . . .$14.995836 351C, 1970-74 . . . . . . . . . . . . . . . . . . . . . . . .$13.995838 429-460, 68-88 . . . . . . . . . . . . . . . . . . . . . . .$14.995839 429-460 CJ/SCJ . . . . . . . . . . . . . . . . . . . . . . . .$18.997556 4.6L Head DOHC . . . . . . . . . . . . . . . . . . . . . .$14.997565 5.0L SVO Head Yates . . . . . . . . . . . . . . . . . . . .$14.99

Header GasketsHigh Temp Fiber Stock and Small Race

5500 Set . . . . . . . . . . . . . .$6.99

Heavy-DutyScraperSharp, hardened steelblades remove carbon, oldgasket material, adhesives,sludge and other hard-to-clean substances fromblocks, heads, etc.51000 $6.99

CarbideGasketScraperSix-sided carbide blade cutssmoother and lasts longer.

51650 $9.99


Coolin

g &

Heati

ng

42

Flex Fan Spacer For FordReplaces factory thread-on fan clutch. Slips over factory threaded hub.For use with Turbo Flex Flex Fans with 5/8" pilot hole. 2" Fan Spacerwith 8mm mounting hardware.

23118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.99

Universal Fan Spacer KitsDie-cast aluminum fan spacers with 5/8"male pilot and 3/4"female pilot hole. Comes with bushing to reduce 5/8" femalepilot and 5/16" NC and NF mounting hardware.

24100 1 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.9924200 2 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.9924225 2-1/4 inch . . . . . . . . . . . . . . . . . . . . . . . .$10.99

Turbo Flex®

Standard Electric FanFeatures high strength, glass filled polypropy-lene blade and shroud assemblies. Straightblade design flows more air than spiral bladedesigns. The low profile is ideal for vehicleswith limited space. Has multiple mountinglocations to fit almost any application.

10" Standard Electric FanMounting area required: 11" x 10" x 2-1/4"900 CFM(est) Motor RPM 3000AMP Draw 7.0 Fuse Size 30 AMP

19120 . . . . . . . . . . . . . . . . . . .$64.99

12" Standard Electric FanMounting area required: 13-3/4" x 12-1/2" x 2-3/4"1200 CFM(est) Motor RPM 3000AMP Draw 6.0 Fuse Size 30 AMP

19122 . . . . . . . . . . . . . . . . . . .$74.9914" Standard Electric Fan

Mounting area required: 15-1/2" x 14" x 3-15/16"1650 CFM(est) Motor RPM 2500AMP Draw 8.0 Fuse Size 30 AMP

19124 . . . . . . . . . . . . . . . . . . .$79.99

16"Standard Electric FanMounting area required: 17" x 16" x 3-1/4"2100 CFM(est) Motor RPM 2000AMP Draw 8.9 Fuse Size 30 AMP

19126 . . . . . . . . . . . . . . . . . . .$84.99

Turbo Flex® HighPerformance Flex FansTurbo Flex Flex Fans pull additional air through the radi-ator at low RPMs when the speed of the vehicle isn’tenough to cool the engine’s coolant system. At higherRPMs, when the vehicle’s speed forces ample airthrough the radiator, the fan blades flatten out, resultingin less power being used to spin the fan. Engine per-formance and gas mileage are improved.

• Exclusive accelerated pitch angle flows substantially more air• 30% thicker, hardened stainless steel blades for long life• Specially formed blade tips designed to minimize fan noise• Two piece steel center hub for positive blade attachment• Fans feature a black powder coated centers• Rated to 10,000 RPM• Ideal for full sized trucks and vehicles used for towing• Available as standard or reverse rotation configurations• Perfect for applications requiring extra cooling such as vehicles with turbo or superchargers

Standard Rotation Fans85150 15 inch . . . . . . . . . . . . . . . .$24.9985170 17 inch . . . . . . . . . . . . . . . .$25.9985180 18 inch . . . . . . . . . . . . . . . .$25.9985190 19 inch . . . . . . . . . . . . . . . .$34.99Reverse Rotation Fans86170 17 inch . . . . . . . . . . . . . . . .$28.9986180 18 inch . . . . . . . . . . . . . . . .$28.9986190 19 inch . . . . . . . . . . . . . . . .$34.99

Wiring KitAdjustable 160°F-210°F ThermalSwitch. Kit includesall components forelectric fan installa-tion.

18905 . .$46.99

Turbo Flex®

High PerformanceElectric FansThe most powerful electric fans available and arecapable of moving almost twice the volume of airas competitive models. Features include high RPMpancake motors with dual ball bearing armaturesupports for longer life. 10" and 12" fans havehigh strength, glass filled nylon blades. 14", 16"and 18" fans have lightweight aluminum bladeassemblies. All High Performance Electric Fans feature an open steel fan housing, a Perma-Cool®exclusive, for unrestricted air flow. Requires Wiring Kit (see below).

10" High Performance Electric FanMounting area required: 13" x 10" x 2-1/2"1250 CFM(est) Motor RPM 2100AMP Draw 6.8 Fuse Size 30 AMP19010 . . . . . . . . . . . . . .$81.99

12" High Performance Electric FanMounting area required: 12-1/2" x 12-1/2" x 3-3/4"1650 CFM(est) Motor RPM 2400AMP Draw 7.5 Fuse Size 30 AMP19008 . . . . . . . . . . . . . .$89.99

14" High Performance Electric FanMounting area required: 14" x 14" x 3-3/4"2950 CFM(est) Motor RPM 1800AMP Draw 9.5 Fuse Size 30 AMP19114 . . . . . . . . . . . . . .$98.99

16" High Performance Electric FanMounting area required: 16" x 16" x 3-3/4"2950 CFM(est) Motor RPM 1750AMP Draw 9.8 Fuse Size 30 AMP19115 . . . . . . . . . . .$102.99

18" High Performance Electric FanMounting area required: 17-3/4" x 17-3/4" x 3-3/4"2500 CFM(est) Motor RPM 500AMP Draw 10.3 Fuse Size 30 AMP19117 . . . . . . . . . . . .$112.99

Cool Pack IIFeatures include dual 14" high output electric fans controlled with a160°F - 210°F adjustable thermal switch mounted in an aluminumassembly with a black powder coated finish. • Eliminates factory fanclutch, fan and shroud. • Increases horsepower and torque. • Highoutput, low amp electric fans. • Adjustable thermal controller. • Robust1/8" thick aluminum assembly. • Durable black powder coated finish.• Classic design enhances any engine compartment. • Easy installa-tion, no cutting or drilling. • Pre-assembled and wired.

19510 Fits 87-97 Ford pickups and Broncos, Expeditions, Excursions with gas V8s . . . . . . .$499.9919513 Fits 81-87 Chevy/GMC pickups, Blazer, Suburbans with 19"x28.5" radiator cores (gas) $599.9919514 Fits 88-98 Chevy/GMC pickups and 92-98 Suburban with 17"x34" radiator cores (gas)$429.9919515 Fits 92-98 Chevy/GMC pickups and Suburbans with heavy duty 19"x34" radiator cores (gas) $469.9919516 Fits 99-02 Chevy/GMC pickups/Tahoe/Suburbans with gas V8s and 17"x34" radiator cores .$599.9919517 Fits 99-02 Chevy/GMC pickups/Tahoe/Suburbans with gas V8s and 17"x28.5" radiator cores $589.99Wiring

Kit170° ThermalSwitch. Kit includesall components for electric faninstallation includ-ing 30 AMP fuseand holder.

19001 .$18.99


Coolin

g &

Heatin

g

43

Frame Rail Trans CoolerKit• Designed for street rod use.• Mounts to frame near the transmission.• Offset mounting brackets for 360° air flow

improves heat dissipation.Coil Size: 1-1/2" x 2-1/2" x 24"Frame rail Trans cooler Kit 15,000 GVW

1003 . . . . . . . . . . . . . . . . . . . . . . . . .$36.99

Thin Line TransCooler KitsThin line coolers feature 1/2" alu-minum tubes, Turbulator coolingfins, 11/32" multi-barb fittings andplastic fin protectors. Kits includetransmission oil hose, illustratedmultilingual instructions and all nec-essary mounting hardware.Lifetime Warranty

12,000 to 14,000 GVWRecommended for compact and small carsCoil size: 3/4" x 5" x 12-1/2"1010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.99

14,000 to 16,000 GVWRecommended for compact and small cars with occasional lighttowing. Coil size: 3/4" x 5" x 15-1/2"1011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $28.99

16,000 to 18,000 GVWRecommended for medium and full size cars and light trucks with occa-sional light towingCoil size: 3/4" x 7-1/2" x 12-1/2"1012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.99

18,000 to 20,000 GVWRecommended for full size cars and trucks with regular towing and motorhomes up to 28 feet longCoil size: 3/4" x 7-1/2" x 15-1/2"1013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $36.99

22,000 to 24,000 GVWRecommended for trucks with frequent heavy towing and 28 feet to 46feet long motor homesCoil size: 3/4" x 10" x 15-1/2"1014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $42.99

20,000 to 22,000 GVWRecommended for trucks and mini-motor homes with medium towingCoil size: 3/4" x 10" x 12-1/2"1015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $40.99

Bolt On AdapterReplaces stock oil filter canister to 13/16"-16 spin on fil-ter with 3-1/8" O-Ring. O-Ring, gasket and bolts forearly and late applications included.1134 . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99

Oil Filter Relocation Kits

Universal Oil Filter Relocation Kits fit engines with the following spin-on oil filter

thread sizes: 3/4"-16, 13/16"-16, 1"-12, 18 x 1.5mm, 20 x 1.5mm and 22 x

1.5mm. Designed to use oil filters with 3/4"-16 threads.

10695 Single Oil Filter Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . .$44.99

10795 Dual Oil Filter Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . .$58.99

Universal Engine Oil Cooler KitsReduces oil temperature for extended engine life.Prevents costly repairs. Lifetime Warranty.

150 Horsepower: Coil size 3/4" x 7-1/2" x 12-1/2"69189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99250 Horsepower: Coil size 1-1/2" x 7" x 14"10189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$93.99450 Horsepower: Coil size 1-1/2" x 7" x 21"40189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.99

Trans ”Cooler“ Remount KitKit contains 11/32" x 4' oil hose, stainless steel hose clamps and tie mounts withprotective foam pads.

102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99

High PerformanceFuel Filter and WaterSeparatorsHigh performance up to 25 GPM, dual inlets

and outlets allows choice of flow direction,

ideal for dual fuel pumps or carbs. Kit contains

cast aluminum filter mount, Perma-Cool

24,000 mile filter element and two pipe plugs.

Port Size: 1/2" FPT

81794 . . . . . . . . . . . . . . . .$33.99

Purple IceLowering engine operating temperatures can translate intomore power and reliability. One bottle of Royal Purple'shighly effective Purple Ice Radiator Super Coolant will dropthe temperature of water, or water/antifreeze up to 20°. Italso adds metal protection to the cooling system. Reliedupon by racers. Works great on the street. Ideal for towing!

RPMPI-BP . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99

Automatic TransmissionFilter KitStandard Kit - features cast aluminum filter mount, Perma-Cool oil filter, high pressure/high temperature transmissionhose, brass fittings, stainless steel hose clamps, mountinghardware and illustrated multilingual instructions.

10678 . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.99

30 Amp A/C Relay30 AMP air conditioning relay activates electricfan when the air conditioning is on.

19002 . . . . . . . . . . . . . . . . . . . . . .$8.99

• Moves filter to convenient location• Provides extra clearance for engineswaps• Increases oil capacity• Available in single or dual remote oil fil-ter mount

Nylon FNylon FansansDesigned to be inexpensive and light, yet stillprovide maximum cooling. Lightweight nylonconstruction relieves stress on the water pumpand bearings. Ideal for race and performanceapplications when cost or weight is a concern.Standard rotation.¥ RPM Rating: 8,000¥ 2” projected width414 14” $16.99415 15” $16.99416 16” $16.99417 17” $16.99418 18-3/8”$16.99

Fan Spacers KitsIncludes spacer, 5/16” bolts and washersneeded to mount a fan directly onto awater pump.

1 GM, Ford 2 GM, FordMill 14548 $13.99 14556 $14.99Red 14548-1 $13.99 14556-1 $14.99Gold 14548-2 $13.99 14556-2 $14.99Blue 14548-3 $13.99 14556-3 $14.99

1 Chrysler 2 ChryslerMill 14528 $14.99 14536 $15.99Red 14528-1 $14.99 14536-1 $15.99Gold 14528-2 $14.99 14536-2 $15.99Blue 14528-3 $14.99 14536-3 $15.99

Fan Spacers - 5/8 PilotBelt-driven fans work best when they are 3/4"to 1" from the radiator’s surface. 504 1/2” thick 1-1/4” bolt $11.99508 1” thick 1-3/4” bolt $12.99516* 2” thick 2-3/4” bolt $12.99* Use when replacing clutch fan (most apps).

RR ace Face FansansDesigned to give youmaximum airflow atlow RPM, and theleast amount engineloading at high RPM.Conforms to mostrace specs requiringmetal belt-drivenfans. ¥ RPM Rating: 8,000 RPM¥ All metal rigid construction¥ 1-3/4” projected width1615 15-1/4” Steel/Steel $19.991617 17-1/2” Steel/Steel $19.991618 18-1/4” Steel/Steel $21.991619 19-1/4” Steel/Steel $21.991715 15-1/4” Steel/Aluminum $25.991717 17-1/2” Steel/Aluminum $25.99

is your weapon!

BBBB EEEE LLLLTTTT----DDDDRRRR IIII VVVV EEEE NNNN FFFFAAAA NNNN SSSS

LoLow Prw Profile Fofile Flelex Fx FansansDesigned for limitedclearance installations.Low pitch reducesengine load whichequals higher perform-ance.¥ RPM Rating: 8,000 ¥ 1-1/4” projected width

Std. Rotat n Star/Blades1007 17” Chrome/Stainless $48.991008 18” Chrome/Stainless $48.991017 17” Blue/Aluminum $22.991018 18” Blue/Aluminum $22.991027 17” Chrome/Red $38.991028 18” Chrome/Red $39.991037 17” Chrome/Blue $38.991038 18” Chrome/Blue $39.991047 17” Chrome/Black $38.991048 18” Chrome/Black $39.991070 17” Blue/Stainless $20.991080 18” Blue/Stainless $21.99Reverse Rotation2817 17” Blue/Stainless $48.992818 18” Blue/Stainless $48.99

7-Blade F7-Blade FansansThis fan features seven unequally-spaced flexblades on a heavy steel star, powdercoateddark blue. The blade stagger makes forextremely quiet operation.

¥ Great for thick (4 or 5 row) radiators

¥ RPM Rating: 8,000¥ 2-3/8” projected width

1817 17” $39.991818 18” $42.99

FF lelex Fx FansansThe high performance flex fans aredesigned to give you maximum airflow atlow RPM, and the least amount engineloading at high RPM. less resistance athighway speeds equals more horsepowerand better gas mileage.

¥ RPM Rating: 10,000 RPM¥ Stainless steel blades¥ 2-1/4” projected width

Standard Rotation Star1307 17” Red $32.991308 18-1/4” Red $33.991309 19-5/16” Red $35.991312 12” Blue $27.991313 13” Blue $27.991314 14” Blue $27.991315 15-1/4” Blue $28.991316 16-1/8” Blue $28.991317 17” Blue $31.991318 18-1/4” Blue $31.991319 19-5/16” Blue $34.991320 12” Chrome $61.991330 13” Chrome $60.991340 14” Chrome $63.991350 15-1/4” Chrome $52.991360 16-1/8” Chrome $55.991370 17” Chrome $56.991380 18-1/4” Chrome $57.991390 19-5/16” Chrome $57.99Reverse Rotation1516 16-1/8” Blue $39.991517 17” Blue $39.991518 18-1/4” Blue $42.991519 19-5/16” Blue $42.99

HHEEAATTis the enemy!

L oL ow-Prw-ProfileofileElectric FElectric FansansExtremely low-profileallows these fans to fitwhere others won’t.Increases horsepower byreplacing the stock beltfan. As a pusher fan, itsupplies additional cooling when required. As a primary electric fan, itincreases HP, extends water pump life and increases gas mileage.One-piece, lightweight plasticshroud with full contact rubberseal maximizes cooling area.W ith thermostat and A/C relay110 Single fan, 15” x 13-1/2” x 2-5/8” $117.99210 Dual fans, 15-1/2” x 26-1/4” x 2-5/8” $219.99W ithout thermostat and A/C relay120 Single fan, 15” x 13-1/2” x 2-5/8” $95.99220 Dual fans, 15-1/2” x 26-1/4” x 2-5/8” $195.99

TT win¥Line Dual Electric Fwin¥Line Dual Electric FansansDesigned to replace the stock horsepower robbing factory fan, whereapplicable.Shrouded dual 10”fan configurationallows for maximumairflow yet requiresvery little mountingspace. Used as aprimary cooling fan,the Twin¥Line canextend water pumplife, increase horse-power and gas mileage. Reversible: Pusher or Puller.

¥ One-piece lightweight plastic shroud with full contact rubber seal¥ Multi-function control box for thermostat control, A/C activation,

and manual switch connection.¥ Dimensions: 22” x 11-1/4” x 4-1/8”

310 with thermostat and A/C relay $209.99320 w/o thermostat and A/C relay $185.99

TT rimline Electric Frimline Electric FansansUsed as primary fan, these economical fans free up wasted horsepowerand increase gas mileage by replacing the stock fan (where applicable).Used as an auxillary fan (pusher), this unit will provide additional coolingin an engine prone tooverheating. Also,allows greater con-trol of fan operation;e.g. water crossings,long idles, etc...Manual switch andadjustable thermo-stat sold separately.Reversible: Pusheror Puller.Straight Blade108 11-7/8” x 10-3/4” x 2-3/4” $75.99112 13-1/4” x 12-1/2” x 2-7/8” $76.99114 14-3/4” x 14” x 3-1/4” $84.99116 16-1/2” x 16” x 3-1/4” $84.99S Blade390 10-7/8” x 10-3/8” x 3-1/2” $69.99393 14-1/2” x 13-7/8” x 3-3/4” $79.99396 16-3/4” x 15-3/4” x 3-7/8” $109.99

These colors available:Prices Vary

These colors available: Prices Vary

UUUU NNNN IIII VVVV EEEE RRRR SSSS AAAA LLLL EEEE LLLL EEEE CCCC TTTT RRRR IIII CCCC FFFFAAAA NNNN SSSS

Electric FElectric Fan an AccessoriesAccessoriesA/C RelayAutomatically engages fan when air conditioner is turned on31146 $13.99Adjustable Temperature Sensor - ThermostatTurns fan on at the desired temperature, 160º - 240º31147 $24.99Auxillary Illuminated SwitchFor cockpit control or override of fan function31148 $16.99Variable Speed ControlSenses coolant temperature via the radiator and sets fan speed from 60% to 100% depending on built-in fan thermostat setting.31165 $79.99

110B

210B

2727 UniUnivverersal sal Puller FPuller Fansans

This fan is designed to fit mid-sizedomestic cars, trucks and SUVís. It is configured tomaximize the radiator coverage on these vehicleswhile providing the largest air-moving capacity possi-ble. Includes universal mounting brackets to positionthe fan without penetrating the radiator core.

¥ Powerful twin 13.5” fans in a compact package¥ One-piece glass-reinforced nylon shroud

with full contact rubber seal¥ Built-in variable speed control (60-100%)

module with adjustable thermostat, A/C relay and manual switch connection.

¥ Airflow flaps allow maximum ram air cooling while fan is not operating.

295 17-1/2” x 27-1/2” x 4” $369.99

Truck A pplicationsGM67-02 Trucks - 28” x 17” or 19”67-91 Suburban - 28” x 17” or 19” FORD80-96 F-Series80-96 F.S. Bronco03-up ExpeditionDODGE72-90 Ram72-91 RamChargerNISSAN96-99 Pathfinder98-01 Xterra

¥ R E C OV E R 17-18 HP!by replacing clutch fan with the #295 electric fan.

¥ Boost torque by 12 ft-lb.!¥ S AV E 2-3 MPG!¥ 4,600 CFM air flow¥ Cooler A/C output¥ Minimize fan noise

Auto A pplicationsCHEVROLET69-76 Corvette - 27-1/2” 68-77 Chevelle - 28” 71-82 Impala - 28” 94-96 Impala - 30” 71-90 Caprice - 28” 91-96 Caprice - 30” 75-77 Malibu - 28” 70-77 Monte Carlo - 28”

Auto A pplications - cont dPONTIAC70-81 Firebird/Trans Am - 27-1/2”68-77 GTO. LeMans, Tempest66-99 Bonneville73-77 Grand Am66-77 Grand Prix OLDSMOBILE65-96 Olds 9865-99 Olds 88

Electric FElectric FansansRestores horsepower by replacing the stock fan, where applicable.Extends water pump life and increases gas mileage. ¥ Strongest 15" electric fan available:

out-performs all 16"!¥ Provides constant cooling, regardless

of engine RPM.¥ One piece, lightweight nylon shroud.¥ Rigid bracket mounting system,

no thru core mounting.¥ High torque, high RPM electric motor.¥ Built-in control box with adjustable

thermostat 160-240, A/C relay and manual switch connection.

¥ Motor leads can be reversed to create a pusher fan, but efficiency is reduced.

Dimensions: 18" x 16" x 4-1/4"

150 Universal with controls(available in colors) $199.99155 Universal without controls(available in colors) $182.99175 86-93 Ford Mustang 5.0L $209.9940 84-97 Ford Ranger/Bronco II, 4/6 cyl. $191.9960 82-02 Chevy/GMC, S-10/Blazer 4 cyl. $197.99475 87-99 JEEP 4/6 cyl. $209.99165 84-96 Toyota 4WD $219.99

Dual ElectricDual ElectricTTrru cu ck Fk FansansThese truck fans feature aone-piece glass-reinforcednylon shroud and two powerful motors with 15”blades! These ruggedunits are designed to fitfull-size trucks with thelarge radiators (32” wide cores). The engine runs quieter, cooler andwith higher horsepower, torque and mileage than with stock set-ups.

¥ One-piece molded glass reinforced nylon shroud with full contact rubber seal.

¥ Variable Speed Control: 60-100%

¥ Adjustable thermostat and A/C relay¥ Quick, solid installation; minimal drilling¥ Motor leads can be reversed to create a pusher fan,

but efficiency is reduced.

290 Universal Monster Truck Fan $389.99280 92-99 Chevy/GMC w/34” radiator $399.99282 00-02 Chevy/GMC w/34” radiator $399.99270 97-02 Ford F150/250, non-Super Duty $389.99

Dimensions:17 x 31-7/8 x 4-1/2

Part #150 & 155 available inthese colors:

Prices Vary

ScirScirocco Drocco Draa ggRR acing Facing FansansThis fan is specially designedfor the popular Scirocco radiatorused in dragsters and bracketracing. One-piece moldedshroud with full contact rubberseal maximizes heat transfer.Powerful twin fans control thetemperature spike at athe end of the run.Used in conjunction with an electric water pump, the fans continue tocool your motor until temperatures are down to normal. Rugged moldedconstruction stands up to harsh vibration. Entire assembly weighs only6 pounds!The Scirocco fan can be used as a pusher or puller. Custom bracketsbolt onto factory mounts on both 19” and 21” OE aftermarket and all alu-minum construction radiators. Manual switch and adjustable thermostatsold separately.

365 18-1/2” x 13” x 2-1/2” $175.99

AAAA PPPP PPPP LLLL IIII CCCC AAAATTTT IIII OOOO NNNN----FFFFIIIITTTT EEEE LLLL EEEE CCCC TTTT RRRR IIII CCCC FFFFAAAA NNNN SSSS

D o nD o n t let yt let your cour clutclutch fh fan dran draa g yg you doou dow nw n

SporSport Compact Electric Ft Compact Electric Fansans

Extremely low-profile fansare specifically designed to fiteach application. There areno holes to drill; units boltdirectly to radiator at OEmounting points. Plug & Play electrical connectors match OE, and plugdirectly into existing connectors. Glass reinforced nylon shroud provideshigh heat resistance and full contact rubber seal eliminates vibration.

1992-2000 Honda Civic125 Single, 15” x 13-1/2” x 2-5/8” $169.991994-2001 Acura Integra225 Dual, 15-1/2” x 26-1/4” x 2-5/8” $299.992001-2002 Ford Focus190 Single, 15” x 13-1/2” x 2-5/8” $169.91995-1999 Mitsubishi325 Dual, 15-1/2” x 26-1/4” x 2-5/8” $299.99

125Y

125225

These colors available:Prices Vary

¥ R E C OV E R 17-18 HP!by replacing the clutch fan with the dual electric fans.

¥ Boost torque by 20 ft-lb.!

¥ S AV E 2-3 MPG!¥ 5,500 CFM air flow

FFrrame Rame Rail Coolerail CoolerDesigned to mount on the side of aframe rail or cross member. It’s perfectas an auxillary tranny cooler on drag orstreet rod applications where there justisn’t enough room for everything. Suppliedwith GatorClips®. Fitted with #6AN fittings.

4109 2-1/2” x 20” x 3/4” $40.99

TT rransLifansLife e TTrransmission ansmission Oil CoolerOil CoolerssTests have proven that a 20° drop influid temperature can double the lifeof automatic transmission compo-nents. Cooler tranny oil gives morereliable, consistent shifts underextreme conditions. ¥ Complete with all hardware, hose and 3/8” billet barbed fittings¥ High Efficiency Turbulator - Superior heat transfer over other designs

4110 10,000 GVW 5” x 12” x 3/4” $25.994112 12,000 GVW 5” x 15” x 3/4” $25.994116 16,000 GVW 7-1/2” x 12” x 3/4” $27.994118 18,000 GVW 7-1/2” x 15” x 3/4” $39.994120 20,000 GVW 7-1/2” x 20” x 3/4” $41.994126 26,000 GVW 10” x 20” x 3/4” $46.99

Light Duty CoolerLight Duty CoolerssReduces operating temperatures, protects equipment and maintainsoptimum conditions for efficiency and performance. Supplied with GatorClips® & #6AN fittings.

Inline Fuel CoolerMounts in fuel line before carburetor orfuel injection providing colder fuel to theengine.4136 3-1/2” x 12” x 3/4” $39.99General Purpose Compact Cooler4130 2-1/2” x 12” x 3/4” $35.99

TT rransmission Cooleransmission CoolerRR emount Kitemount KitWhen reinstalling an oil cooler as a thru-core installation, the mounting hardwareshould be replaced. These are thesame nylon bolts and nuts included in our TransLife coolers andour HD engine coolers. Includes 4 sets of nylon bolts, washers,push-nuts and rubber stops.

3910 Remount Kit, set of 4 $8.99

RR emote emote TTrransmission ansmission Oil CoolerOil CoolerThis compact unit features a300 CFM electric fan that pro-vides its own cooling air supply.Weighs in at less than 3pounds! Supplied with GatorClips®. NOT FOR ENGINE OIL COOLING APPLICATIONS.

4190 16,000 GVW 7-1/2” x 12” x 3-1/8” $145.99

Engine OilEngine OilCoolerCoolers Kitss KitsFits most domestic andimport vehicles with spin-onfilters, large and small.

¥ Complete with all proprietary sandwich adapters, hardware, hose and 1/2” billet barbed fittings.

Standard Duty - 5 x 20 x 3/4 , 1/2 tubes3951 3/4”, 13/16”, 18mm, 20mm, 22mm $74.993952 13/16” Chevy V8 w/recessed land $74.99High Perf.- 7 x 21 x 1-1/2 , 5/8 tubes3953 3/4”, 13/16”, 18mm, 20mm, 22mm $169.993954 13/16” Chevy V8 w/recessed land $169.99

SandSandwicwich h A d aA d apter Kitspter KitsA sandwich adapter permits the installation of anengine oil cooler without relocating the oil filter. Itinstalls between the oil filter and the filter land,providing a pressurized source of oil for theengine oil cooler.NOTE: A sandwich adapter increases the distance that the oil filtersticks out from the block. Check beforehand for adequate clearances.Shorter filters are made to fit most applications.

Thread Thick O-ring3961 3/4”-16 1” 2-1/2” $23.993962 18mm-1.5 1” 2-1/2” $24.993963 13/16”-16 2” 3-1/8” $27.993964 13/16”-16 1” 3-1/8” $25.993965 20mm-1.5 1” 2-1/2” $25.993966 13/16”-16 1” 2-1/2” $25.99

4136

3951

CCCC OOOO OOOO LLLL EEEE RRRR SSSS

is yourweapon!

is the enemy!HHEEAATT

G atorClips¤ OilCooler MountingClamps are sup-plied as standardon selected Flex-a-Lite tube-and-fin coolers.


Coolin

g &

Heati

ng

48

Water Pumps Whatever your needs; Weiand water pumps can cool you down. Theseheavy duty, high flow pumps have all been dyno tested and feature heavyduty bearings and shafts.

Action Plus Cast Iron

8250 SB-Chevy, Short .$66.998251 SB-Chevy, Long .$66.998252 BB-Chevy, Short$102.998253 BB-Chevy, Long .$72.99

Water PumpsFP1330N 62-72 SB Chevy (Short) . . . . .$27.99FP1521 69-76 SB Chevy . . . . . . . . . . .$25.99FP1525 77-85 SB Chevy . . . . . . . . . . .$24.99NEW–Not Rebuilt!

Action Plus Aluminum8208 SB-Chevy, Short, 5/8" Pilot . . . . . . . . . . . . . . . . . . . . .$99.99

8240 SB-Chevy, Long . .$109.998212 BB-Chevy, Short . .$105.998242 BB-Chevy, Long . .$129.99

NNNNEEEEWWWW LLLLoooowwwweeeerrrrPPPPrrrr iiiicccceeeessss!!!!

Flex-BraidTM KitsWoven metal hose sleeving kit protects hoseand provides professional appearance. Eachkit contains a 3 ft. vacuum hose sleeving with4 shrink sleeves, 4 ft. fuel hose sleeving with 4clamp covers, 12 ft. heater hose sleeving with4 clamp covers and 4 1/2 ft. upper radiatorhose sleeving with 2 clamp covers. Availablein either red, blue or silver.

8090 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.998091 Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.998092 Silver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.99

Be Cool's new cooling modulestake the guesswork out ofproperly cooling your vehi-cle. All of the componentshave been carefully matched forpeak efficiency and every assemblyguarantees a minimum 20° coolant tem-perature drop or your money back. A wide variety of models are available that offer guaranteed cooling resultsfor 400, 700 and 1,000 horsepower applications. If your goal is complete temperature control, regardless of horsepower orambient conditions, why try anything else? Be Cool guarantees temperaturecontrol or your money back - period.

Automatic Manual55-57 Chevy . . . . . . . . . . . . . . . . . . . . .*82021 . . . . .*8002168-77 GM “A” Body (33” x 19”) . . . . . . . .*82008 . . . . .*8000867-69 Camaro (22” core), 64-67 Chevelle SB . . . . . . . . . . . . . . . . .82009 . . . . . .8000966-67 Chevelle BB . . . . . . . . . . . . . . . . .82016 . . . . . .80016* Dual 11” FansKits for Manual trannys start at . . . . . . . . . . . . . . . . .$999.99Kits for Automatic trannys start at . . . . . . . . . . . . .$1099.99

Chevy Small-Block Electric Water PumpEliminates unnecessary weight andimpeller-drag experienced at high RPM,pumps up to 35+ gallons of water perminute, and delivers the cooling that canmake the difference between a win andsecond place! Durable, but light-weightaluminum, epoxy powder coated for corro-sion resistance, and can be used for streetuse. Fitting for water pump included.

66225R Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.9966225B Blue (shown above) . . . . . . . . . . . . . . . . . . .$149.9966225BK Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.99

Conversion RadiatorLooking for a high quality radiator for yourconversion? From boulevard cruising to show& go competitions with your small truck con-version or heading off road in your SB Chevy,Ford or Jeep conversion, Be Cool has a radia-tor for you. Our radiators are simple to install

and look great too. Be Cool's conversion radiators have been tried and tested under the most rigorous conditions for performance and reliability.

65012 82-83 S-10 Std. Trans. . . . . . . . . . . . . . . . . . . . . . . . .$319.9968012 82-93 S-10 Auto Trans. . . . . . . . . . . . . . . . . . . . . . . .$359.9965015 94-02 S-10 Std. Trans. . . . . . . . . . . . . . . . . . . . . . . . .$329.9968015 94-02 S-10 Auto Trans. . . . . . . . . . . . . . . . . . . . . . . .$359.9965161 82-94 Ranger/84-94 Bronco II/91-94 Explorer Std. Trans. .$359.9968161 82-94 Ranger/84-94 Bronco II/91-94 Explorer Auto Trans. .$359.9960030 70-86 Jeep CJ/Scrambler SB Std. Trans. . . . . . . . . . . .$495.9962030 70-86 Jeep CJ/Scrambler SB Auto Trans. . . . . . . . . . .$589.99

Victor Series AluminumWater PumpsEdelbrock aluminum water pumps provide maximum cooling for the street and the racetrackThey’re just the thing to stop overheating in streetrods, racecars, tow rigs, and even motorhomes.Edelbrock has designed these “Super Cooling” aluminum water pumps to provide maximum flow,maximum pressure, and equal distribution to bothsides of the block. 8805 Ford FE 352/428 . . . . . . . .$159.998810 SB-Chevy, Short,5/8" Shaft .$159.998811 SB-Chevy, Long . . . . . . . . .$149.99

8812 SB-Chevy 3/4" Shaft 71-82 Corvette . . . . . . . . . . . . . . .$159.998814 BB-Chrysler 58-79 361-440 . . . . . . . . . . . . . . . . . . . . .$119.998815 SB-Chevy 81-91 Corvette . . . . . . . . . . . . . . . . . . . . . . .$149.998820 SB-Chevy Polished 5/8" Shaft . . . . . . . . . . . . . . . . . . . .$249.998821 SB-Chevy Long Polished . . . . . . . . . . . . . . . . . . . . . . .$239.998840 Ford 5.0L 5/8" Shaft . . . . . . . . . . . . . . . . . . . . . . . . . .$149.998841 SB-Ford 65-68 289,68-69 302, 69 351W . . . . . . . . . . .$154.998843 SB-Ford 70-78 302, 70-87 351W . . . . . . . . . . . . . . . . .$154.998844 SB-Ford 70-79 351C/M &400 . . . . . . . . . . . . . . . . . . . .$154.998850 BB-Chevy Short 5/8" Shaft . . . . . . . . . . . . . . . . . . . . . .$162.998854 BB-Chevy Short Reverse . . . . . . . . . . . . . . . . . . . . . . . .$169.998851 BB-Chevy Long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$169.998866 BB-Ford 70-92 429/460 . . . . . . . . . . . . . . . . . . . . . . .$169.998881 SB-Chevy Long Reverse . . . . . . . . . . . . . . . . . . . . . . . .$149.998882 SB-Chevy Short Reverse . . . . . . . . . . . . . . . . . . . . . . . .$164.998892 SB-Chevy Short Polished Reverse Rotation . . . . . . . . . . .$249.99

Water Pump Spacer KitSatin finish for 1969 and later Chevy Small Block and90° V6

8207 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.99

Radiator Caps70001 Round-style billet radiator cap w/logo . . . . .$34.9970002 Octagon-style billet radiator cap w/logo . . . .$34.9971001 Polished Round-style billet radiator

cap w/logo . . . . . . . . . . . . . . . . . . . . . . . .$39.9971002 Polished Octagon-style billet radiator

cap w/logo . . . . . . . . . . . . . . . . . . . . . . . .$39.99

70001

71002

Vented Recovery Tank70003 Diamond-cut, 7”x3” w/inlet fitting &

mounting bracket . . . . . . . . . . . . . . . . . . . . . .$104.9971003 Polished Diamond-cut, 7”x3” w/inlet fitting &

mounting bracket . . . . . . . . . . . . . . . . . . . . . .$119.99

Module Assemblies

Dual FanPictured


Ign

ition

s, Ele

ctric & H

yperte

ch

49

The Micro Tuner allows you to recalibrate: Top speed limiter, Engine revlimiter, Tire size, Rear end ratio, Shift points, Shift firmness, Speedometerand Cooling fan temperature. • Using the Micro Tuner will yield gains of10% in horsepower and up to 13% increase in torque. • Feel thePower from idle to high RPM

D-BoxDODGE RAM TURBO DIESEL, THE POWER’S IN THE D-BOX.Gain an Extra 65 HP and 185ft/lb Torque! • Easy installation, there’s no wire cutting or soldering.• Connects to the ECM Data Link connection and MAP sensor.• Has low EGTs (Exhaust Gas Temps) without exhaust upgrades.

• Is very reliable and backed by Superships.4200 98 1/2-2000 Dodge Cummins Diesel . .$559.994300 2001 Dodge Cummins Diesel . . . . . . .$559.994400 2002 Dodge Cummins Diesel . . . . . . .$559.99

2240 99-00 GM LS1 . . . . . . . . . . . . . . . . . . . . . . . . . .$359.992275 99-00 GM Trucks 4.8L, 5.3L & 6.0L Engine . . . . .$359.992285 2001 MAX GM Trucks 4.8L, 5.3L & 6.0L Engines .$359.992295 2002 MAX GM 4.8L, 5.3L, 6.0L . . . . . . . . . . . . . .$359.992505 01-02 MAX GM 8.1L . . . . . . . . . . . . . . . . . . . . . .$359.992555 96-97 MAX GM 4.3L . . . . . . . . . . . . . . . . . . . . . .$359.992565 98-00 MAX GM 4.3L . . . . . . . . . . . . . . . . . . . . . .$359.99

The “MAX” Micro Tuner

Superchips for Ford Vehicles

7.3 Turbo Diesel Micro Tuner1705 1994-2003 Ford Powerstroke

$359.99Gain from 60-80hp, 115-130 ft./lbs. of torque

Normally Aspirated:• Up to 10% Increase in Horsepower• Up to 13% Increase in Torque

Force Induction (SC, TURBO, NOS):• Up to 20% Increase in Horsepower• Up to 25% Increase in Torque

Starting At $224.99

Options that are changeable are shift points, shift firmness, speedlimiter and tire/gear, with the electronically controlled automatictransmission. It doubles as a vehicle diagnostic tool used on anylate model Ford vehicle to retrieve Diagnostic Trouble Codes.

1715 4.6L, 5.0L, 5.4L, 5.8L, 7.5L V-8s and the 6.8L V-10 Powered Ford “Trucks and SUVs” along with the 5.4L Supercharged Lightnings and Harley Davidson Trucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $359.99

1725 96-02 Ford V8 4.6L Gas Cars . . . . . . . . . . . . . . . . . . . . . . . . . $359.99

“MAX” Micro Tuner For Ford Gas Trucks, SUV’s & Cars

2505

Allows the vehicle owner to reprogram the factory computer. It's as easy toinstall as changing a fuse. It plugs straight into the diagnostic port of thevehicle computer, asks a few ”yes” or “no” questions and in less than 30minutes the vehicle computer is reprogrammed with Hypertech PowerTuning. The vehicle can be returned to stock tuning at any time. Some ofthe adjustable features of the Power Programmer III (depending on make,model, and year) include:• Raise the Top-Speed Limiter To Match The Speed Rating Of High-Perf Tires• Adjust Transmission Shift Points • Adjust Transmission Shift Firmness• Adjust RPM“Rev” Limiter • Lower Cooling Fan “On/Off” Temperatures• Correct The Speedometer, Odometer, and Part-Throttle Shifting When

Non-Stock Tire Sizes and/Or Non-Stock Axle Ratios Have Been Installed• Dual Fuel Engine Tuning • And, of Course, Hypertech Power Tuning

Power Up With The Power Programmer III

OtherApplications

Available

$339.99

GM Car30009 '01 Camaro/Firebird 3.8 L30010 '01 Camaro/Firebird 5.7L LS130015 2002 GM Camaro/Firebird/TA with LS1 360152 1996 Camaro/Firebird 3.8 V6365652 1996 Corvette LT-4365752 1996 Camaro/Firebird 5.7 L365762 1996 Corvette LT-1369752 1996 Impala SS375752 1997 Camaro/Firebird 5.7 L380752 1998 Camaro/F Bird LS1385752 1998 Corvette LS1390752 1999 Camaro/F Bird LS1390753 2000 Camaro/F Bird LS1395752 1999 Corvette LS1395753 '00 Corvette 5.7 LS1

GM Truck30001 2000 GM Pickups/SUV 4.3/5.0/5.7/7.430002 2000 Sierra/Silverado 4.830003 2000 Sierra/Silverado 5.330004 2000 Sierra/Silverado 6.030005 '00 Trucks 4.8/5.3/6.030006 '01 Trucks 4.8/5.3/6.030007 '01 Truck/SUV 8.1L30008 '01 Truck/SUV 4.3 L30012 2002 GM 4.8, 5.3, 6.0, 8.130019 2003 GM Truck & SUV360202 1996 GM Pickup, All370202 1997 GM Trucks, All380202 1998 GM Trucks390202 1999 GM Pickups 4.3/5.0/5.7/7.4390302 1999 Sierra/Silverado 4.8/5.3/6.0 L

Add Horse Power to Your Ford Turbo Diesel41001 '00 Powerstroke 7.3L41007 '99 Powerstroke 7.3L41009 '97 Powerstroke 7.3L41010 '96 Powerstroke 7.3L41012 '01 Powerstroke 7.3L41019 '02 Powerstroke 7.3L

Ford Truck and Car41002 1999 Ford Truck & SUV with 4.6L41003 1999 F-Series V1041004 1999 Ford Crown Vic & Mercury 41005 2000-01 4.6 Mustang/Çobra41006 2001 Ford Truck & SUV with 4.6L 41008 '99-01 F-150 Lightning 5.4 S/C41011 '00 Truck/SUV 4.6 L41013 '97 Truck/SUV41015 '98 Truck/SUV41020 2001 F-150/Expedition 5.441021 1999 Ford 5.4L Truck/SUV41022 2000-02 Ford 6.8 Truck/SUV41024 2002 Ford 4.6L Truck/SUV480002 1998 4.6/5.4 F-Series Trucks (all trans)

Dodge Truck50002 1997 5.2/5.9L Truck/SUV50003 1998 5.2/5.9L Truck/SUV50004 1999 5.2/5.9L Truck/SUV50005 2000 5.2/5.9L Truck/SUV50006 2001 5.2/5.9L Truck/SUV

480002

390302

The "3715" Dodge Ram Truck "GAS" Micro Tuner is very simple toinstall. Program your vehicle with "Superchips Signature Tuning" in justa few minutes. User options on the "3715" are as follows. • Raise revlimiter • Raise speed limiter • Correct speedometer for tire height

changes on 2 and 4 wheel drive vehicles • Speedo corrections will work on all,except some very early 1998 models.

3715 1998 - 2003 5.2L & 5.9L Models . . . . . . . . . . . . . . . . . . . . .$359.99

“GAS” Micro Tuner For Dodge Ram Truck

50006

Introducing Superchip’s New Tuners…2715 For 2003 H2 Hummer . . . . . . . . . . .$359.992725 For GM’s LS1 and LS6 . . . . . . . . . . . .$359.99

Cap & Rotor Kits Super Stock YellowPerformance Tan HEI Super Coil Supp. 8mm

Chevrolet with HEI Full Size-S/B 74-79 8122 $21.99 140003 $52.99 4048 $24.99S/B 80-86 8122 $21.99 140003 $52.99 4049 $24.99454 74-76 8122 $21.99 140003 $52.99 4071 $24.99Camaro-2.8 82-84 8130 $17.99 140008 $52.99 4062 $20.992.8 FI 85-89 8133 $15.99 140011 $52.99 4079 $20.993.1 90-92 8133 $15.99 140008 $52.99 4078 $20.99S/B 74-80 8122 $21.99 140003 $52.99 4048 $24.99305,350 81-85 Carb 8122 $21.99 140003 $52.99 4049 $24.99305 TPI 85-86 8131 $21.99 140003 $52.99 4070 $24.99305,350 87-92 8132 $18.99 140008 $52.99 4065 $24.99Corvette-350 84 8122 $21.99 140005 $52.99 4066 $24.99350 85-91 8131 $21.99 140005 $52.99 4066 $24.99Trucks-2.8 82-84 8130 $17.99 140008 $52.99 4062 $20.992.8 85-90 8130 $17.99 140011 $52.99 4078 $20.994.3 88-91 8133 $15.99 140008 $52.99 4093 $21.99305,350,400 75-80 8122 $21.99 140003 $52.99 4048 $24.99305,350L,C,K-10-20 81-86 8122 $21.99 140003 $52.99 4049 $24.99366,427,454 75-80 8122 $21.99 140003 $52.99 4071 $24.99Dodge Cars and Light Trucks-318,360 67-78 8320 $16.99 140001 $52.99 4047 $24.99Ford Mustang-302FI 85-90 8233 $15.99 140008 $52.99 4054 $24.99Ford Light Trucks-All 8 cyl 75-76 8220 $18.99 8140 $27.99 4046 $24.99302 Ex EEC IV 78-84 8224 $19.99 8140 $27.99 4069 $24.99302 87-92 8233 $15.99 140008 $52.99 4054 $24.99351W 77-79 8224 $19.99 8140 $27.99 4052 $24.99351W Ex EEC IV 80-84 8224 $19.99 8140 $27.99 4069 $24.99351M-400 77-82 8224 $19.99 8140 $27.99 4068 $24.99460 77-87 8224 $19.99 8140 $27.99 4052 $24.99


Ign

itio

ns,

Ele

ctri

c &

Hypert

ech

50

Ignition and Wire SetsWrapped in extra thick, double silicone jacket to protectagainst current leakage while protecting the wire fromoil and solvent damage. Boots are extra heavy to prevent burn through and cross fire.

8mm Super StockWire SetsLow resistance; Just 500 Ohms per foot. Allowsmore energy to reach spark plugs while sup-pressing RFI noise. Silicone jacket gives superiorstrength and barrier to outside elements whilestainless steel terminals provide excellent con-ductivity and corrosion resistance.

See Below for Pricing and Applications

Points & Cap & Rotor Kits Super Stock Super Stock Yellow Spiral CoreCond. Kit Perf. Tan Coil Super Coil Supp. 8mm 8.8mm

Chevrolet with Point Type Ignition Full Size-

All 6 cyl 63-73 8105 $15.99 8121 $15.99 8140 $27.99 140001$52.99 4060 $20.99 N/A

S/B V8 55-70 8104 $15.99 8120 $19.99 8140 $27.99 140001$52.99 4042 $24.99 8842 $42.99S/B V8 71-74 8104 $15.99 8120 $19.99 8140 $27.99 140001$52.99 4044 $24.99 8844 $42.99B/B V8 65-74 8104 $15.99 8120 $19.99 8140 $27.99 140001$52.99 4043 $24.99 8843 $42.99

Camaro, Chevelle, Malibu, Monte-Carlo-

All 6 cyl 64-74 8105 $15.99 8121 $15.99 8140 $27.99 140001$52.99 4060 $20.99 N/A

S/B V8 64-74 8104 $15.99 8120 $19.99 8140 $27.99 140001$52.99 4044 $24.99 8844 $42.99B/B V8 65-74 8104 $15.99 8120 $19.99 8140 $27.99 140001$52.99 4043 $24.99 8843 $42.99

Trucks-

All 6 cyl 63-74 8105 $15.99 8121 $15.99 8140 $27.99 140001$52.99 4060 $20.99 N/A

S/B 64-72 8104 $15.99 8120 $19.99 8140 $27.99 140001$52.99 4042 $24.99 8842 $42.99S/B 73-74 8104 $15.99 8120 $19.99 8140 $27.99 140001$52.99 4044 $24.99 8844 $42.99B/B 69-74 8104 $15.99 8120 $19.99 8140 $27.99 140001$52.99 4043 $24.99 8843 $42.99

Accel TruckSuper Tune-Up TST KitsIncludes: Matched AccelCustom Fit Wire Set, AccelDistributor Cap & Rotor andGet Accel U-Groove SparkPlugs, Free! Everything youneed to Super Tune yourpickup truck, van and SUV! 18 applications covering most Chevrolet,Dodge, Ford, GMC & Jeep late model 6 & 8 Cylinder applications.8mm Custom fit Extreme 9000 wire set with Heat reflective Coat sparkplug boots rated to 1200°F. Double silicone wire with low resistanceFerro-Spiral core. Some in-line 6 cylinder applications use 5000 series

wire set where extreme heat is not a problem.

TST# Years Cyl Engine Notes PriceChevrolet & GMC Truck, Van & SUVTST1 1996-00 6 4.3L 262 Vortech $109.99TST2 1987-95 6 4.3L 262 Throttle Body Injection $79.99TST3 1996-00 8 5.0L 305 Vortech $109.99

1996-00 8 5.7L 350 VortechTST4 1987-95 8 5.0L 305 Throttle Body Injection $89.99

1987-95 8 5.7L 350 Throttle Body InjectionTST5 1983-85 8 5.0L 305 Carb $89.99

1983-86 8 5.7L 350Carb, LT Emissions +8600 GVW1983-85 8 5.7L 350Carb, LT Emissions -8600 GVW

TST6 1996-00 8 7.4L 454 Vortech $109.99TST7 1990-95 8 7.4L 454 Throttle Body Injection $89.99

1990-91 8 7.4L 454 SS Throttle Body InjectionTST8 1992-93 8 7.4L 454 SS Throttle Body Injection $89.99

1987-89 8 7.4L 454 Throttle Body InjectionTST9 1985-91 8 7.4L 454 Carb, SS Exhaust Manifold $89.99Dodge Truck , Van & SUVTST10 1992-99 6 3.9L 239 Magnum Fuel Injection $79.99TST11 1992-99 8 5.2L 318 Magnum Fuel Injection $89.99

1993-99 8 5.9L 360 Magnum Fuel InjectionTST12 1988-91 8 5.2L 318 Throttle Body Injection $89.99

1979-87 8 5.2L 318 Carb1989-92 8 5.9L 360 Throttle Body Injection1979-88 8 5.9L 360 Carb

Ford Truck, Van & SUVTST13 1987-96 6 4.9L 300 Fuel Injection $49.99

1984-86 6 4.9L 300 Carb w/EEC-IVTST14 1990-97 8 5.0L 302 Fuel Injection, Push-on Rotor$89.99

1989 8 5.0L 302 Fuel Injection1988-97 8 7.5L 460 Fuel Injection

TST15 1985-87 8 5.0L 302 Fuel Injection $89.991988-97 8 5.8L 351WFuel Injection, Push-on Rotor1984-87 8 5.8L 351W Carb w/EEC-IV

51

Ign

ition

s, Ele

ctric & H

yperte

ch

Heavy Duty Super Stock CoilsPerfect for street applications needing a heavy duty perform-ance coil. Long, intense spark (35,000 volts). Speciallycrimped and soldered internal connections guarantee positivecontact and extra reliability. 50 State Legal.

8140 Yellow . . . . . . . . . . . . . . . . . . .$27.998140C Chrome . . . . . . . . . . . . . . . . .$28.99

Brute Thunder HEI Super CoilACCEL Brute Thunder HEI Super Coil are the most powerfulGM HEI in-cap coils available today. ACCEL’s Brute Thundercoils are maximum performance race units engineered todeliver maximum ignition output from idle to over 9000RPM’s. For optimum performance, use with ACCEL ultra per-formance ignition module P/N 35367. GM HEI in-cap Brute Thunder coil red/yellow primary leads same vehicle applications as 140003 Super Coil.

140013 . . . . . . . . . . . . . . . . . . . . .$59.99GM HEI in-cap Brute Thunder coil red/white primary leads same vehicle applica-tions as 140005 Super Coil140015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.99

U-Groove Spark PlugsThese plugs get their name from their patented ground elec-trode design. This shape helps develop a larger, hotter spark forbetter combustion and reduce fouling. Inside the multi-ribbedinsulator, a copper-core center electrode provides excellent con-ductivity. A nickel chrome shell and rolled threads assure trou-ble-free installation and guard against corrosion for easyremoval.As low as $1.66 ea.

New Shorty Design PlugsOn some cars, normal plugs won’t clear the header tubes. Accel’s short designplugs allow extra header clearance you need along with easy access. 1/4" short-er0576S . . . . . . . . . . . . . . . .$2.99 ea.

Spark Plug Holder & IndexerIndexing plugs is a proven way to improve combustionand these two handy trackside tools make it easy.1010 Spark Plug Holder . . . . . . . .$9.991005 Spark Plug Indexer . . . . . .$13.991001 Index Washers . . . . . . . . .$14.99

High Output CoilChevy V8 '74-'85Produces 50,000 volts

66943C $29.99

External CoilFor later model GM dis-tributors, there is anaffordable external coil.Produces 45,000 volts. Fits V8 87-95 trucks,87-93 cars.

66937C $29.99

MSW Balanced Tune-up SystemMSW Balanced Tune-Up System Kits are engi-neered for the professional! Each kit contains aCustom Magnetic Suppression Wire set. Not acarbon core conductor, but a real metal wirethat delivers 4 times the energy to the spark,while providing superior radio interference sup-pression. The professional, heavy dutyDistributor Cap and Rotor included, have

brass/copper contacts, for improved conductivity and increased operationlife. All materials contained in these kits are designed to increase perform-ance and meet today’s standards. We’ve even included silicone grease andwire numbering system.Ford6101 88-96 Ford Truck 460 with EECIV with flat, male coil . . . . . . .$40.996102 77-82 Ford LTD 302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.996106 86-90 Ford Tempo 3.0L . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.996107 86-90 Ford Bronco II 2.9 MPI . . . . . . . . . . . . . . . . . . . . . . . . . .$31.996108 90-94 Ford Truck 300 (4.9) MPI . . . . . . . . . . . . . . . . . . . . . . . .$28.996114 86-91 Ford Taurus 2.5L CFI . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.996115 81-90 Ford Escort, Exp 1.6L, 1.9L . . . . . . . . . . . . . . . . . . . . . .$26.996116 85-88 Ford Ranger 2.3L . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.996114 86-91 Ford Taurus 2.5L CFI . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.996115 81-90 Ford Escort, Exp 1.6L, 1.9L . . . . . . . . . . . . . . . . . . . . . .$26.996116 85-88 Ford Ranger 2.3L . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.996129 77-83 Ford Truck 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.996130 82-85 Ford Thunderbird 3.8 without EECIV . . . . . . . . . . . . . .$33.996131 69-71 Ford Galaxie 390, 400, 427 . . . . . . . . . . . . . . . . . . . . .$30.996133 89-91 Ford Crown Victoria 302 with EECIV . . . . . . . . . . . . . .$38.996134 78-82 Ford Truck 351M, 400 . . . . . . . . . . . . . . . . . . . . . . . . .$40.996135 84-86 Ford Mustang, Thunderbird 3.8 MPI with

Bolt on Rotor, with EECIV . . . . . . . . . . . . . . . . . . . . . . .$31.996157 94-91 Ranger -(U) 3.0L MPI Engine (exc.DIS) . . . . . . . . . . . . . .$39.996158 96-94 Bronco,E,F100-350 -(N) 5.0L MPI Engine . . . . . . . . . . .$44.996159 96-94 Bronco,E,F100-350 -(H) 5.8L MPI Engine

(exc. Lightning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.996160 93-89 Bronco,E,F100-350 -(H) 5.8L MPI Engine, with EEC . . .$42.99General Motors6103 74- 79 Chevy Camaro 350 with HEI . . . . . . . . . . . . . . . . . . . .$37.996104 78-86 Chevy Monte Carlo 350 . . . . . . . . . . . . . . . . . . . . . . . .$38.996105 74-76 Chevy Monte Carlo 454 with HEI . . . . . . . . . . . . . . . . .$37.996109 88-93 Chevrolet Truck 305H, 350K . . . . . . . . . . . . . . . . . . . . .$38.996110 85-92 Chevy Camaro 2.8 MPI, 3.1 MPI . . . . . . . . . . . . . . . . . .$28.996111 92-93 Chevy Caprice 4.3L TBI . . . . . . . . . . . . . . . . . . . . . . . . .$28.996112 88-91 Chevy Truck 4.3L . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.996119 85-93 Chevrolet S10, 2.8L . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.996120 83-84 Chevrolet Celebrity, Citation 2.8L . . . . . . . . . . . . . . . . . .$31.996121 85-86 Pontiac Grand Am 2.5L TBI . . . . . . . . . . . . . . . . . . . . . .$36.996122 85-86 Buick Skyhawk 2.0P TBI . . . . . . . . . . . . . . . . . . . . . . . . .$26.996123 78-87 Oldsmobile Cutlass 3.8A . . . . . . . . . . . . . . . . . . . . . . . .$31.996124 81-82 Chevrolet Celebrity 2.8L 2/BB . . . . . . . . . . . . . . . . . . . .$32.996127 73-74 Chevrolet Truck 350 . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.996128 72-74 Chevrolet Truck 396, 454 . . . . . . . . . . . . . . . . . . . . . . .$29.996132 83-84 Buick Skyhawk 2.0P TBI . . . . . . . . . . . . . . . . . . . . . . . . .$33.996136 89-93 Chevy Camaro 305 TBI, TPI, HO, 350 MPI, TPI . . . . . . .$37.996138 83-88 Chevrolet Truck 292, 4.8L . . . . . . . . . . . . . . . . . . . . . . .$31.996153 90-85 S10/S15, S-Blazer,Jimmy-(E) 2.5L Engine . . . . . . . . . . . .$29.996154 95-94 C,K Series-(H) 5.0L, (K) 5.7L Engines . . . . . . . . . . . . . . .$42.996155 95-94 C,K,G,P Series (N) 7.4L Engine . . . . . . . . . . . . . . . . . . .$41.996156 93-88 C,K,G Series (N) 7.4L Engine . . . . . . . . . . . . . . . . . . . . .$42.99Chrysler6113 88-92 Chrysler Daytona 2.2 MPI, 2.5 TBI . . . . . . . . . . . . . . . . .$20.996117 79-91 Dodge Truck 318, 360 . . . . . . . . . . . . . . . . . . . . . . . . .$30.996118 74-78 Dodge Truck 318, 360 . . . . . . . . . . . . . . . . . . . . . . . . .$23.996125 82-85 Dodge Charger 2.2L . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.996126 75-76 Dodge Coronet 225 . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.996137 70-78 Chrysler New Yorker 383,400,440 . . . . . . . . . . . . . . . .$31.996139 79-83 Chrysler Cordoba, 225 . . . . . . . . . . . . . . . . . . . . . . . . .$20.996141 84-87 Dodge Caravan 2.6L . . . . . . . . . . . . . . . . . . . . . . . . . .$20.996142 84-87 Dodge Mini Ram Van, Ram 50 2.6L 2/B . . . . . . . . . . .$23.996143 87-96 Dodge Caravan 3.0L MPI . . . . . . . . . . . . . . . . . . . . . .$35.99Imports6144 85-88 Toyota pickup/4-Runner 2.4L (22R) 2Bbl. engine . . . . .$35.996146 77-83 Accord 1.6L 2Bbl., 1.8L 3Bbl. Hitachi Distributor

(clip-down cap). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.996147 92-93 Mitsubishi pickup 2.4L (4G64) MPI engine . . . . . . . . . .$34.996150 89-83 Starion-2.6L (G54B) Turbo Engine, Cordia, Tredia . . . . . . . .

(1983 Only)-1.8L (G62B) 2Bbl.Engine . . . . . . . . . . . . . . . . . . .$29.996151 78-76 Corona-2.2L (20R) 2Bbl. Engine, Pickup,

4 Runner-2.2L (20R) 2Bbl. Engine . . . . . . . . . . . . . . . . .$29.996152 84-88 Corolla 1.6L (4AC) 2Bbl. engine . . . . . . . . . . . . . . . . . .$33.99Jeep6162 96-91 Cherokee,Wrangler Y/J -(P) 2.5L MPI Engine (U.S.) . . . .$35.996163 90-86 Cherokee,Commanche,Wagoneer,Wrangler -

(E)(H) 2.5L TBI-AMC Engine . . . . . . . . . . . . . . . . . . . . . .$25.996164 98-97 Grand Cherokee-(S) 4.0L Engine, with Dist. 56027028 $39.996165 93-91 All -(S) 4.0L MPI Engine . . . . . . . . . . . . . . . . . . . . . . . . .$29.99

Wire Universal Kit300+ Wire Universal Kit World’s most powerful rac-ing spark plug wire. Very low resistance but withgood RFI suppression. 7030 90° Boots w/o HEI7031 90° Boots w/HEI7032 Straight Boots w/o HEI7033 Straight Boots w/HEI

All Listed Numbers $59.99


Ign

itio

ns,

Ele

ctri

c &

Hypert

ech

52

Pro-Billet & BilletDistributorsMSD Pro-Billet Distributors are the design by

which all other distributors are compared. MSD offers over 60 differentPro Billet distributors for various applications. Unless indicated, MSDBillet Distributors must be used with an MSD Ignition control.Chevy8361 Chevy V8, Vacuum Advance . . . . . . . . . . . . . .$189.9985551 Chevy V8, Non-Vacuum Advance . . . . . . . . . .$209.998570 Chevy V8, Small Diameter . . . . . . . . . . . . . . . .$239.998356 Chevy V8, Dual Pickup . . . . . . . . . . . . . . . . . .$239.998360* Chevy V8, Ready-To-Run . . . . . . . . . . . . . . . . .$249.998365 Chevy V8, Pro Billet HEI . . . . . . . . . . . . . . . . .$329.99Ford8580 Ford V8, 351C, 400, 429, 460, No Vac. Adv. . .$209.998582 Ford V8, 289, 302, No Vac. Adv. . . . . . . . . . . .$209.998584 Ford V8, 351W, No Vac. Adv. . . . . . . . . . . . . .$209.998477 Ford V8, Small Diameter, Vac Adv. 351C, 460 . .$274.998478 Ford V8, Small Diameter, Vac Adv. 351W . . . . .$274.998479 Ford V8, Small Diameter, Vac Adv. 289, 302 . . .$274.998577 Ford V8, Small Diameter, No Vac Adv. 351C-460 $234.998578 Ford V8, Small Diameter, No Vac Adv. 351W . . .$239.998579 Ford V8, Small Diameter, No Vac Adv. 289, 302 $279.998350* Ford V8, Ready To Run, Vac. Adv., 351C-460 . .$294.998352* Ford V8, Ready To Run, Vac. Adv., 289-302 . . .$294.998354* Ford V8, Ready To Run, Vac. Adv., 351W . . . . .$294.99* No MSD Box Required

HEI DistributorsThese are far superior to original OE distributors. They operatewithout misfires up to a minimum of 7500 RPM. They also produce 67% more energy in the coil and is 45% faster at getting the spark to the plugs, which results in more accuratetiming throughout the RPM range. Capable of delivering twicethe spark across the spark gap. You'll see dramatic improve-ments, because of the great module and coil that have been engineered to work together to produce these results.

D1000 Chevy SB/BB, Black Cap . . . . . . . . . . . . . . . . . . . . . . . . .$214.99D1051 Chevy SB/BB, Red Cap, Machined Finish . . . . . . . . . . . . .$229.99D1101 Olds V8, Red Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$214.99D1201 Pontiac SB/BB, Red Cap . . . . . . . . . . . . . . . . . . . . . . . . .$214.99D1350 Ford SB, Black Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$229.99

Ford Thick FilmModulators & GM HEIControl ModulesNow legal in 50 states. Fits most stock and modifieddistributors. Solid state electronics provide high coiloutput and superior reliability. Dwell control circuitensures long, consistent coil charging, and currentcontrol circuit protects against coil over heating.Resists false triggering from RFI of high output coils.

Prices Starting At . . . . . . . . .$39.99

Ultra High Performance IgnitionModule For The GM4-Pin HEI Distributor

ACCEL’s engineers have designed a new ultra highperformance ignition module to overcome the prob-lems and shortcomings of most OEM and aftermarketGM HEI 4-pin modules. Direct plug-in replacement for

all GM and aftermarket 4-pin HEI modules.

35367 Ignition Module . . . . . .$66.99

High-PerformanceControl Module66944C Chevy V8 HEI 74-85 (4 pin)$24.99

Distributor Tune-Up KitContains: hi-power 50,000 volt coil; superior “no arc” rotor; premium cap; coildust cover; hi-performance, low saturation control module; vacuum advance unit;

HEI bushing; wire harness & capacitor; hi-performanceadvance spring & weight set; and mounting hard-ware. Chevy V8 HEI 74-85. 4 pin module66945BKC (Black) . . . . . . . . . . . . . . . .$74.9966945BC (Blue) . . . . . . . . . . . . . . . . . .$74.9966945RC (Red) . . . . . . . . . . . . . . . . . .$74.99

Performance Advance Curve KitReleases hidden horsepower by optimizing ignition tim-ing. Precision-manufactured advance weights and 3 setsof advance springs enable custom-tailoring of mechanicaladvance curve. Not legal for sale or use in California.

31042 GM/Delco V8 Points-Type Distributors . . . . . . . . . . . . . . . . . . .$8.9931041 GM/HEI V8 Distributors with Vacuum Advance . . . . . . . . . . . . . . .$9.99

Chrome Distributor ClampKeeps ignition timing in its place. Stronger than factoryclamps. Provides ample clearance and easy access6197 All Chevrolet V8 and 90° V6 engines $9.99

Bronze Distributor GearsFits Chevy Stock distributor with .490" shaft and Accel® distributornumbers 34100A-C-S-V, 35100-T, 41100E-S-V32100B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.99Fits Accel® distributor #’s 30100-T, 37100A-T, 43100A-T, 44100A-T31100B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

MSD Blaster CoilsThese Blaster Coils are oil-filled canister design coils with a100:1 turn ratio that are designed to get the most performancefrom your MSD.

8202 Blaster 2, Red, . . . . . . . . .$29.998203 Blaster 2, Red, Includes Ballast Resister . .$36.998200 Blaster 2, Chrome, Includes Ballast . . . . .$35.998222 Blaster Hi-Vibration . . . . . . . . . . . . . . . .$41.998223 Blaster 3, Spark Plug Style Tower . . . . . . .$33.99

Blaster SS CoilThe compact Blaster SS Coil provides up to 40,000 voltswith the MSD 6 Series ignitions. Modern looking designworks with MSD 6 Series units and is perfect for latemodel applications.8207 . . . . . . .$35.99

40,000 Volt Ignition CoilReplaces most canister type coils in distributor-type inductionignition systems. Not suitable for capacity discharge or distribu-torless systems.

40011 Black, Oil Filled . . . . . .$25.9940001 Chrome, Oil Filled . . . .$27.9940111 Epoxy . . . . . . . . . . . . .$29.99Fits Many Applications!

45,000 Volt Ignition Coil45001 Chrome, Oil Filled . . . . . . .$30.9945011 Black, Oil Filled . . . . . . . . . .$28.9945111 Black, Epoxy . . . . . . . . . . .$33.99Fits Many Applications!

Choose from 3 custom-curved billet aluminum distributors,calibrated for your specific Chevy small or big block applica-tion. Equipped with premium red cap with brass terminals,adjustable vacuum advance, 50,000 volt high-output coiland low saturation ignition module.

66996 (High wt.) Chevy SB & BB Billet Dist. .$239.9966997 (Med. wt.) Chevy SB & BB Billet Dist. $239.9966998 (Light wt.) Chevy SB & BB Billet Dist. $239.99

• For Chevrolet V8 Engines 262-400 and 396-502• CNC-machined cast 356 T-6 aluminum housings • Direct plug-inreplacement with OE factory-type harness connectors • HEI Coil pro-vides higher output for higher RPM with quicker responseStreet Performance Applications• New high performance mechanical advance mechanism • Adjustable vacuum advance installed

8548201 Street Performance Distributor without In-Cap Coil $132.998548201C Street Perfe Dist w/Mallory 29215 Race In-Cap Coil $149.99

HEI Electronic Distributorswith Polished HousingsThese 100% new distributors have all the reliable compo-nents. They include a high -power 50,000 volt coil. This highperformance distributor produces a 50,000 volt spark through7,500 RPM with true spark alignment for instantaneousresponse, a high performance curve, a premium cap withbrass terminals, and a low-saturation ignition module.

Chevy V8 '74-'85 66941BKC (Black Cap) . . . . .$159.9966941BC (Blue Cap) . . . . . .$159.9966941RC (Red Cap) . . . . . . .$159.99

Fits Ford '62-'83, 260 - 289 - 302 engines. A high per-formance unit, ruggedly built with the same features asPROFORM's popular Chevy HEI distributors. Improves onstock; built-in 50,000-volt coil, premium cap with brass ter-minals, micro polished die-cast housing, both upper andlower bushings for added durability, and no voltage-reducing ballast resistor.

66969R (Red) . . .$209.9966969B (Blue) . . .$209.9966969BK (Black) . .$209.99

Ign

ition

s, Ele

ctric & H

yperte

ch

53

HEI DistributorThe Proform 66940C for '74-'82 Chevroletengines has no rebuilt components - it has ahigh-performance control module, a hardenedgear, a capacitor that prevents radio static, ahigh dielectric cap with brass terminals, and pre-mium rotor. (Coil not included)

66940C Chevy V8 . . . . . . . .$124.99

100% New GM V8 LateModel DistributorDesigned for '87-'95 GM Trucks and '87-93 cars.

66938RC (Red Cap, Polished)$159.9966939BKC (Black Cap) . . . .$149.99

Chevy HEI Electronic RacingDistributorFits Chevy small block and big block engines. Designed tomeet the high performance demands of racing competi-tion! these 100% NEW. They include a high-power 50,000volt high output coil . This high performance distributorproduces a 50,000 volt spark through 7,500 RPM with

true spark alignment for instantaneous response, a high performancecurve, a premium cap with brass terminals, and a low-saturation ignitionmodule.

66941RM (Red) . . . . . . . . . . . . . . . .$189.99

Ignitor Ignitor II Applications1162A 91162A 6 Cyl. General Motors Cars and Trucks, 1961-19741181LSC** 8 Cyl. Most Chev/Buick 1957-19741181LSCC** 8 Cyl. Most Olds/Pont 1957-19741181* 91181 8 Cyl. General Motors Cars and Trucks, 1957-19741182D 91182D 8 Cyl. GM 1956-58 Dual Points1186LSC** 8 Cyl. Chevrolet 1955-561261 91261 6 Cyl. Most Ford Cars and Trucks, 1968-19741281* 91281 8 Cyl. Ford Cars & Trucks, 1957-19741281D 91281D 8 Cyl. Ford Most 1960-1972 Dual Points1361A 91361A 6 Cyl. Chrysler Cars and Trucks, 1960-19721381A* 91381A 8 Cyl. Chrysler Cars and Trucks, 1962-72 with

Chrysler Distributor1382 Most 59-71 Mopar 383, 413, 426, 440 Dual Points1641 75-77 Toyota Celica, Corona and Corolla1847V Audi100/100GL, dist #0-231-167-011,45Ignitor Ignitor II Industrial Applications1542 91542 4 Cyl. John Deere dist #IBT-4101L, R, S1163A 91163A 6 Cyl. John Deere dist #1112624, 11124661541 91541 4 Cyl. International1541 Case 530 dist.# IAD6003-2J1542 Case 530 dist.# IAD6003-2F1145A John Deere 500 dist.# 11126481146A Minneapolis-Moline M670 dist.# 1126601545 Centaur Hi-way Mower dist.# IGW4121-A1163A Allis Ch. 190 dist.# 1111311Ignitor Ignitor II Marine Applications1146A 91146A 4 Cyl. Mercruiser, 470 Delco from Serial #42087301581 91581 8 Cyl. 1582 91582 8 Cyl. AC181 34000 series distributorsML181 9ML-181 8 Cyl. Mercruiser from Serial #3385721ML183 9ML-183 Replaces Unilite #605 module$69.99 $104.99

More Available! Call with your Applications*Except dual point - Fuel injection - Dual 4bbl**Note ”LS“in the application number denoted ”lube sensor“. This allows the Ignitor to trigger off the lobes of the distributor cam, eliminating the need for magnetic rings orsleeves. This will also eliminate the need for distributor removal during installation. The “C”denotes clockwise for Chevrolet and Buick. The “CC” denotes counter clockwise forOldsmobile and Pontiac. They cannot be interchanged.

$69.99

Ignitor II• Compared to point-type systems, develops on average 4

times more available energy between 3000 and 5000RPM, and nearly doubles available plug voltage.

• Compared to the original Ignitor, develops on average 3times more available energy between 3000 and 5000RPM, an nearly doubles available plug voltage.

• Higher RPM performance is improved when used withthe new Flame-Thrower II super low resistance 45,000volt coil, however, it is compatible with any induction coil.

Breakerless Electronic Ignition SystemThe Ignitor fits entirely under your distributor cap. The Ignitor installs as fast aspoints, replacing these troublemakers and the condenser permanently. Theincreased voltage (up to 35,000) means crisp performance all the way to red line.Enjoy longer plug life, better fuel economy and all the advantages of electronicignition systems. Rotating cobalt magnets, mounted on distributor shaft, triggeran electronic switching module. Distributor not included.

MostApplications

Ford 302 HEI Distributor

Custom-Curved Chevy HEIBillet Distributor with Coil

XR-i - Points to Electronic Ignition• Rev limiter to protect your engine. Adjustable from 4,000-8,000 RPM • Ignition timing picked up directly from the pointscam, with no shutter wheel required • Over temperature pro-tection for safe use inside the distributor • Easy installation!Mounts in stock points location • Looks original! Containedcompletely inside distributor • Fully digital! Providing optimumperformance at all RPM and temperature levels • Two wireeasy hookup • CARB E.O. D-225-67 50 state legal750-1700 Fits 1957-74 Ford 8 Cyl. . . . . . . . . .$69.99750-1710 Fits 1957-74 Chevy 8 Cyl. . . . . . . . .$69.99

GreatDeal!

HEI Distributor


Ign

itio

ns,

Ele

ctri

c &

Hypert

ech

54

MSD 7AL-2Professional racing ignition that is the most popular choicefor drag racing. Powerful 115 millijoule sparks burn every-thing from race gas to alcohol.• Multi-sparking CD Ignition • Built-in Rev Control • Includes rubber shock mounts7220 8 cylinder . . . . . . . . . . . . . . . . .$329.99

Two Step Module SelectorAllows you to have two rpm limits when plugged into the revcontrol on yourMSD 6AL, 7AL-2 or other MSD ignition with abuilt-in rev control.

8739 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99

RPM Activated SwitchWill perform a variety of functions from turning in a light bulb toactivating an MSD Timing computer all at a specific RPM.Adjustable with plug-in rpm modules.8950 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.99

Shift LightTells you when to shift at a specific rpm. Plug in the desired RPMmodule and when the engine reaches that rpm the light willturn on.

8952 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.99

MSD Digital-7 ProgrammableThis is the ultimate drag racing ignition. Lap-top program-ming with MSD's Pro Data software lets you control timingcurves, rev limits, start retards, launch curves, and even indi-vidual cylinder timing.• 15 MHz processor manages up to 15,000,000 instructionsper second. • Buit-in Shift Light • Stage rev control • Multiple retards for each shift • Start Retard • ICM Timing Control7530 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$672.99

Digital DIS IgnitionsThese ignitions fit late model engines with distributorless ignition sys-tems. Take advantage of the benefits of the famous MSD Ignition sys-tem on your distributorless vehicle. • Fits 4 Cylinder (PN 6211) and 6,8 Cylinders (PN 6215) • Two Step Rev Control • Built-In ProgrammableTiming Control • 15 MHz Controller controls all functions6211 ................................................................$319.996215................................................................... $329.99

MSD 5Inductive multi-sparking ignition for stock vehicles. Can be triggered by points or factory electronic ignitions.5200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.99

MSD 6ALThe #1 selling performance ignition in the world. Features multiplesparks, 20 degrees of hot capacitive discharge sparks and the provenSoft Touch Rev Control. • Quick Starts • Smooth Idle • Crisp Throttle Response • Fits most foreign and domestic vehicles6420 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $195.99

MSD 6AMulti-sparking, CD Ignition improves starting, increases throttleresponse, produces more overall power and improves drivability. • Multiple Spark Discharge • 20 degrees of spark duration • Fits 4, 6, and 8 cylinder engines • CARB E.O. Approval6200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99

MSD Digital-6 PlusAdvanced digital technology makes this the ultimate street perform-ance ignition. Features multi-spark, CD design with built-in Two StepRev Control and single stage retard. • Built-in Start Retard • Two Step Rev Control for drag racing • Single retard for nitrousapplications • Fully potted • CARB Approved6520.................................................................. $279.99

MSD 6T Circle Track IgnitionThe MSD 6T is the winningest ignition in stock car and road racing! Towithstand severe jolts and vibrations of harsh racing, the 6T’s capaci-tor and transformer receive additional bracing for a solid mount. All ofthe circuits and components then receive an extra thick coating ofHumi-Seal adding even more vibration protection. Top it all off with aset of sturdy vibration mounts and you have one of the toughest igni-tions offered! Even in the toughest conditions the 6T Ignition Controlsdeliver race winning performance!6400.................................................................. $175.99

MSD Firewall Feed-ThruTo prevent voltage leaks in passenger compartment mountedcoil installations, MSD designed the Firewall Feed-Thru. Usually,in these type of installations, a hole is drilled in the firewall andthe high tension coil wire is passed through with a rubber grom-met. Even with the grommet, this type of installation does notprovide the best voltage insulation. Molded from Rynite® andnylon, the Firewall Feed-Thru provides 1/2” of insulation toensure that the coil’s spark reaches the distributor. The FirewallFeed-Thru mounts in a 1” hole directly to the firewall and hashigh tension towers on each side connected through a brass rodfor full spark transfer.

8211 Red/Black .................................................... $10.99

MSD CUSTOM & UNIVERSAL FIT WIRES AVAILABLE!

Distributorless Tach DriverEver wonder how you can install an aftermarket tachometer ona vehicle with no distributor and multiple coil packs? MSD hasthe answer with the Distributorless Tach Driver! The Tach Driverwires inline to the coils’ shared 12 volt supply wire. It senses thecurrent through this wire and converts this information into a 12

volt output signal that most aftermarket tachometers and other rpm devices use as atrigger signal. The compact housing measures only 1.5” x 3.5” x 2” and is pottedwith a polyurethane compound for vibration and water protection. NOTE: Not foruse on LS-1 style engines.8913 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99


Ign

ition

s, Ele

ctric & H

yperte

ch

55

8.5mm Super Conductor Spark Plug WireThe MSD 8.5mm Super Conductor Wire is "the" performancewire. Engineered from the inside out, the 8.5 offers everythingyou have ever wanted in a wire; incredibly low resistance withoutelectronic interference! In a single 12 inch length of SuperConductor Wire there is only 40 - 50 ohms of resistance! That isthe lowest resistance of any helically wound wire. To accomplishthis, we use a copper alloy conductor due to its great voltage car-rying capabilities. The low resistance results in less loss in sparkenergy so more reaches the spark plug. The conductor is woundextremely tight around a special center core. So tight in fact, thatthere is over 40 feet of conductor wrapped into a single foot ofplug wire. This winding procedure, combined with a ferro-mag-netic impregnated center core, produces an extremely effectiveElectro Magnetic Interference (EMI) "choke".

Universal Sets31239 8.5mm LT1 Cap Style, 90° at Plug . . . . . . . . .$79.9931199 8.5mm Hei & Point Style Cap, Multi-Angle Plug $75.9931229 8.5mm Hei Style Cap, 90° Plug . . . . . . . . . . .$69.993119 8mm Hei & Point Style Cap, Multi-Angle Plug .$54.99

Sport Compact32359 Honda Civic 1.6L 92-97 . . . . . . . . . . . . . . . . .$69.9932349 Acura/Integra 1.8L V-tec 94-97 . . . . . . . . . . . .$69.9932279 2.0L DOHC Chrys, Ply, Mit . . . . . . . . . . . . . . .$39.996300 SCI Sport Compact box . . . . . . . . . . . . . . . .$179.99

Chevrolet32819 GM LS-1 ‘97-On Corvette, Camaro . . . . . . . . .$50.9932149 LT-1 Camaro ‘93-’96 . . . . . . . . . . . . . . . . . . .$69.993135 Heli-Core 267,305,350,400 cars/trucks

(with wires over Valve cover) . . . . . . . . . . . . .$49.9931359 Super Conductor same as 3135 . . . . . . . . . . .$58.9931419 Chevy truck 305-350 85-on . . . . . . . . . . . . .$58.9932169 Chevy Tahoe, Sub. Vortex V8 96-97 . . . . . . . .$74.9931659 (Socket type) chevy 307,327,350

cars/trucks (with wires over V/C) . . . . . . . . . .$69.99

Ford31329 302, 351W HEI . . . . . . . . . . . . . . . . . . . . . . .$69.99

Dodge32189 Dodge Ram 94-97 318-360 . . . . . . . . . . . . .$58.99

Distributor CapsAll MSD Extra Duty Distributor Caps are designed with perform-ance in mind and are molded from high quality, voltage insulatingmaterial and use low resistance terminals.8411 GM HEI Dist. Cap, Red . . . . . . . . . . . . . . . . . . . . $17.998426 Dist. Cap, GM, HEI Late Model Ext. Coil . . . . . . . . $21.998433 Dist. Cap Chevy V8 HEI, Retainer . . . . . . . . . . . . $24.998437 Dist. Cap Alkyd, MSD Chevy V8 dist. . . . . . . . . . . $18.998431 Cap for MSD distributors 8570, 8545, 8546. . . . . $23.998408 Dist. Cap, Ford HEI. . . . . . . . . . . . . . . . . . . . . . . $11.998292 Dist. Cap Mod. Honda Civic 1.5L/6L 92-97 . . . . . $29.998290 Dist. Cap Mod. Honda Civic/CRX 1.5L/6L 88-91 . . $39.99

Rotors8410 Rotor, GM HEI . . . . . . . . . . . . . . . . . . . . . . . . . .$4.998427 Rotor, GM HEI Late model, EXT Coil Cap . . . . . . .$6.998467 Racing rotor MSD Billet Dist. . . . . . . . . . . . . . . . .$12.998423 Rotor, fixed for Cap-A-Dapt kit . . . . . . . . . . . . . . .$16.99

Module & Cables8364 GM High energy HEI module . . . . . . . . . . .$67.998743 3,000 - 3,800 . . . . . . . . . . . . . . . . . . . . . .$23.998744 4,000 - 4,800 . . . . . . . . . . . . . . . . . . . . . .$23.998745 5,000 - 5,800 . . . . . . . . . . . . . . . . . . . . . .$23.998746 6,000 - 6,800 . . . . . . . . . . . . . . . . . . . . . .$23.998747 7,000 - 7,800 . . . . . . . . . . . . . . . . . . . . . .$23.998860 6’ Cable harness 2 wire magnetic trigger . . .$13.998861 Module bypass cable GM . . . . . . . . . . . . . .$7.998956 RPM activated window switch . . . . . . . . . .$78.99

Coils8225 Dist. Coil, GM HEI . . . . . . . . . . . . . . . . . . . . . . . . .$69.998226 GM External HEI coil, Hi-Performance . . . . . . . . . . .$38.998227 Ford Coil, Ford TFI replacement, Hi-Perf . . . . . . . . . .$44.998213 Coil bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99

Distributor Gears MSD distributor gears give you long life, an easy break-in period and reliable performance!8471 Dist. Gear Bronze .500” ID . . . . . . . . . . . . . . . . . .$38.998531 Dist. Gear Iron, MSD Chevy Dist. .500” ID . . . . . . .$19.99

Dual Ignition AdapterThe Dual Channel Ignition Adapter simulates the original coil triggersignal thus allowing the ECU to properly trigger both the tach andfuel injection with the MSD DIS Ignition installed.8912 Tach Adapter Dis.2 & Dis.4 ignitions . . . . . . . . . . .$49.99

Pro-Crimp ToolThe Pro-Crimp features interchangeable jaws allowing for a variety ofdifferent style crimps with one heavy duty tool.3505 Crimp Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

Air

& F

uel

56

Crankcase Vent FiltersUniversal “Push-in” for all valve covers with 1.25" hole. Part # Vent Filter Size62-1516 3"O.D.; 2-1/2"H with shield $17.9962-1490 3"O.D.; 2-1/2"H without shield $15.9962-1514 3"O.D.; 2-1/2"H with shield/1-1/2" I.D (Clamp on) $19.99

AccessoriesCharger OilSpecially formulated to work with K&NFiltercharger® elements providing a superiorair filtration system

99-0504 6 1/2 oz. aerosol can-red . . . . . . . . . . . . . . . . . . . . .$4.9999-0516 12 oz. aerosol can-red . . . . . . . . . . . . . . . . . . . . . . .$5.99Recharger Filter Service KitA six-step system designed to recharge K&N Filtercharger® Air Filters.Includes 6 1/2 oz. spray oil or 8 oz. squeeze oil, 12 oz. filter cleaner, andservice decal.99-5000 Service Kit (spray oil) . . . . . . . . . . . . . . . . . . . . . . . .$8.9999-5050 Service Kit (squeeze oil) . . . . . . . . . . . . . . . . . . . . . .$8.99Air Filter Cleaner and DegreaserK&N cleaner works to dissolve the dirt build up and old filter oil, and can bewashed away with water. Note: Do not use on polished or anodized alu-minum.99-0621 32 fl. oz. squirt bottle . . . . . . . . . . . . . . . . . . . . . . . .$7.99

14" Drop Base-ChromeRace ready low profile air cleaner. Drops filter 1.25" below carburetor flange. 5-1/8" flange fits all popular 4 barrel carburetors.

Part # Neck FlangeElement Hgt.Price60-1280 5-1/8" 3" $80.9960-1290 5-1/8" 4" $80.99

14" ChromePopular 14” chrome racing style assembly. Raises element 9/16” above carburetor flange. 5-1/8” flange fits all popular 4 barrel carbure-tors. Will clear HEI distributors.

Part # Neck FlangeElement Hgt.Price

60-1260 5-1/8" 4" $85.99

Chrome Assemblies Include FilterElement

FiltersDeliver increased air flow and offer much betterprotection for your engine. K&N’s design helpsclean and straighten air flow, increasing power.K&N Filters are washable for reuse, simply use one of K&N Air Filter Cleaners to restore air flow efficiency so your filter performs like new.

E146033-2058

• 14" Flow Top • Increases Horsepower • Washable/Reusable • Provides Superior Filtering • Improves Throttle Response66-1401 14" diameter . . . . . . . . . . .$57.9966-1101 11" diameter . . . . . . . . . . .$54.9966-0901 9" diameter . . . . . . . . . . . .$50.99

AMC/JeepE1100 AMC/Jeep V8/68-89 Dodge L6, V6, V8 . . . . . . . .$32.9933-2114 97-01 Jeep Wrangler 4 & 6 Cyl . . . . . . . . . . . . . .$39.9933-2048 93-88 Jeep Grand Cherokee V8 . . . . . . . . . . . . .$45.9933-2114 97-01 Jeep Wrangler 2.5, 4.0 F/I . . . . . . . . . . . .$39.99

Chrysler/Dodge33-2056 94-02 Dodge 5.9 Turbo Diesel . . . . . . . . . . . . . .$65.9933-2058 94-01 Dodge Ram V10 . . . . . . . . . . . . . . . . . . . .$36.9933-2084 94-01 Dodge Ram 5.2 and 5.9 . . . . . . . . . . . . . .$41.99E-1007 01-02 Dodge Stratus Sedan 2.7L V6 . . . . . . . . . .$40.9933-2072 92-98 Chrysler, Plymouth, Eagle . . . . . . . . . . . . .$38.9933-2175 00-03 Dodge Durango, Dakota all engines . . . . .$42.9933-2247 03 5.9 Ram 1500 & 5.7 Hemi 5.2L, 4.7, 3.7 . . . .$49.99

Ford33-2138 Late 99/00 Powerstroke 7.3 . . . . . . . . . . $37.9933-2123 99 Powertstroke Diesel Early . . . . . . . . . . .$49.99E1946 95-96 Ford 7.3 Turbo Diesel . . . . . . . . . . . .$53.99E1460 83-93 Ford F Series 6.9 and 7.3 Diesel . . .$45.9933-2015 86-93 Mustang 5.0L . . . . . . . . . . . . . . . . . . . . . .$44.99E0940 Mustang 94-03 V6 . . . . . . . . . . . . . . . . . . . . . . .$39.9933-2023 87-98 Ford Trk with L6, V8 . . . . . . . . . . . . . . . . .$39.9933-2024 91-94 Explorer . . . . . . . . . . . . . . . . . . . . . . . . . .$35.9933-2033 89-90 T-Bird/Cougar 3.8 . . . . . . . . . . . . . . . . . . .$44.99E0945 97-03 Ford F Series 4.2, 4.6, 5.4 . . . . . . . . . . . . .$46.99E0995 Explorer/Ranger 4.0 . . . . . . . . . . . . . . . . . . . . . .$37.9933-2106-1 Explorer 5.0 97-98 . . . . . . . . . . . . . . . . . . . . . . .$43.99E1570 68-87 Cars & Trucks . . . . . . . . . . . . . . . . . . . . . .$37.9933-2140-1 01-03 Ford Lightning Supercharged 5.4L-V8 . . . .$34.9933-2207 2002 Ford Explorer 4.0L-V6 & 4.6L-V8 . . . . . . . . .$43.99

GMC33-2129 99-03 Silverado . . . . . . . . . . . . . . . . . . . . . . . . .$39.9933-2008-1 85-92 Camaro TPI (2 required) . . . . . . . . . . . . . . .$25.9933-2042 93-97 Camaro/Firebird 3.4/5.7L . . . . . . . . . . . . .$36.9933-2022 86-95 GM FWD 3.8L . . . . . . . . . . . . . . . . . . . . .$30.9933-2035 90-96 Corvette . . . . . . . . . . . . . . . . . . . . . . . . . .$66.9933-2057 94-96 Caprice . . . . . . . . . . . . . . . . . . . . . . . . . .$43.9933-2062-1 94-96 GM 6.5 Diesel Turbo . . . . . . . . . . . . .$59.99E1690 92-95 GM 6.2, 6.5 Diesel Ex Turbo . . . . . .$43.9933-2135 99-03 Silverado 6.0, 6.5 Diesel . . . . . . . . .$48.99E1065 86-90 S10/S15 2.8, 4.3 V-6 . . . . . . . . . . . . . . . . .$30.99E1500 72 & up GMC with 3 1/2" Filter . . . . . . . . . . . . .$37.99E1650 66-84 GM Cars or Trucks . . . . . . . . . . . . . . . . . . .$39.99E1796 96-99 Chevy Truck V-8 . . . . . . . . . . . . . . . . . . . .$51.9933-2118 98 Camaro Z28 . . . . . . . . . . . . . . . . . . . . . . . . .$52.9933-2063-1 94-97 Cars 3.1, 3.4 . . . . . . . . . . . . . . . . . . . . . .$35.9933-2129 00-03 Chevy Tahoe 4.8 & 5.3L . . . . . . . . . . . . . .$39.9933-2121-1 97-03 Chevy Malibu 2.4, 3.1 . . . . . . . . . . . . . . . .$42.99E-0890 85-96 Pontiac, Chevy, Buick . . . . . . . . . . . . . . . .$31.99E-1009 Chevrolet Trailblazer 4.2L . . . . . . . . . . . . . . . . . .$53.99Honda/Acura33-2124 98-02 2.3 Accord . . . . . . . . . . . . . . . . . . . . . . .$36.9933-2277 03 3.0L Accord & Civic 02-03 e2429 2.0L, 03 1.7L$34.99E-2427 94-01 Acura Integra 1.8L . . . . . . . . . . . . . . . . . .$65.99

ToyotaE2605-1 86-92 Toyota Supra, 88-95 Pickup, 4 Runner w/ V6$35.9933-2054 96-02 Toyota 4 Runner 3.4L . . . . . . . . . . . . . . . .$52.9933-2050-1 01-03 Toyota Tacoma 2.4L . . . . . . . . . . . . . . . . .$34.99

Mazda33-2177-1 99-01 626 2.0L . . . . . . . . . . . . . . . . . . . . . . . . .$38.9933-2676 99-01 MX5 1.8L . . . . . . . . . . . . . . . . . . . . . . . .$35.99Nissan33-2031-2 Nissan 240sx, 300zx, Maxima . . . . . . . . . . . . . . .$39.99Others Available • Verify Your Exact Application Before Ordering

Performance Gold®

Oil FilterThe K&N’s Performance Gold® Oil Filter is constructed fromthe ground up to satisfy the high performance needs foryour race car. Specifically designed to provide high vol-ume, positive oil flow with low restriction, resulting in theright balance between engine protection and low oilpump drag.

HP3001 Dodge, Toyota, Lincoln . . $8.99HP2004 Mitsubishi, Toyota, Ford . . $8.99HP1004 Acura, Geo, Mazda . . . . . $8.99HP3002 GMC, Chevy, Pontiac. . . . $8.99HP6001 Ford . . . . . . . . . . . . . . $12.99 To order Call Toll Free 1.800.831.0884

These low restriction air filters pro-vide quicker throttle response andmore power throughout the rpmrange.

PLEASE NOTE: If the stock air box has emission control devices and/orhoses attached, these parts MAY NOT be re-installed on the assembly.Therefore, these ARE NOT 50 State Legal and are under K&N’s Off-RoadRacing Warranty.63-1024 99-02 Ford F-Series Super Duty Turbo Diesel . . .$221.9963-1025 94-02 Dodge Ram L6-5.9L Turbo Diesel . . . . . . .$234.9963-1039 01-02 Chevy Silverado HD V8-6.6L Turbo Diesel .$221.9963-1053 03 5.9 Dodge Ram . . . . . . . . . . . . . . . . . . . . .$282.99

Air &

Fuel

57

Airaid Intake Systems are specifically designed to take full advantage oftoday’s vehicle technology. Our performance success story is really quitesimple, we use the latest dyno-proven techniques and innovative designsto improve upon intake system efficiency. Therefore, the greater the effi-ciency level, the greater the horsepower output!

200-102 96-00 GM 305/350 Vortec, 99-02 Denali/Escalde, 96-99 Tahoe/Suburban ,4.3L . . . . . . . . . . . . . .$159.99

200-103 96-00 GM C/K 454 Vortec CA models require additional filter, use #62-1040 . . . . . . . . . . . . .$159.99

200-104 88-95 GM 305/350 TBI T/C, Poweraid order 1 inch longer bracket #201-001 . . . . . . . . . . . . . . . . . . . . . .$259.991 inch longer bracket for 200-104 . . . . . . . . . . .$14.99

200-108 96-02 GM S-10/Blazer 4.3L Vortec . . . . . . . . . .$154.99200-112 99-02 GM Silverado 4.8/5.3 & 6.0L, 4.3L . . . . .$265.99200-119 01-02 Suburban/Yukon/GMC HD 8,1 Vortec . .$269.99200-123 01-02 Chevy HD 8,1 . . . . . . . . . . . . . . . . . . . .$269.99200-133 96-03 Chevy/GMC S-Series 4.3L Cool Air Design $149.99200-183 2003 Hummer H2 . . . . . . . . . . . . . . . . . . . . .$229.99201-002 96-00 Vortec Plug

Removes Vortec Silencer Box . . . . . . . . . . . . . . .$39.99300-106 94-00 Ram 318-360

Also fits V6 w/minor modsWill not work in conjunction with Poweraid . . .$259.99

300-107 97-01 Dakota/DurangoFits 2.5, 3.9, 5.2, 5.9L engines . . . . . . . . . . . .$174.99

300-117 2000-01 Dakota/Durango 4.7 . . . . . . . . . . . .$159.99300-120 2000-01 PT Cruiser 4 Cyl . . . . . . . . . . . . . . . . .$159.99300-125 2002-03 Dodge Ram 4.7, 5.9 . . . . . . . . . . . . .$204.99300-128 2003 Dodge Ram Cummins Turbo-Diesel . . . . .$199.99310-110 97-01 Jeep TJ 2.5/4.0L . . . . . . . . . . . . . . . . . .$184.99310-127 99-02 Grand Cherokee 4.7L . . . . . . . . . . . . . .$159.99400-109 97-02 F-150/Expedition V8 (Black)

4.6L & 5.4L (Not 32V) . . . . . . . . . . . . . . . . . . .$234.99400-113 Late 99-01 Super Duty Power Stroke

For trucks built after 12/7/98Fits Excursion w/7.3L . . . . . . . . . . . . . . . . . . .$204.99

400-114 99-02 Super Duty/Excursion V8/V10 . . . . . . . .$239.99400-115 97-02 F-150 4.2 V6 . . . . . . . . . . . . . . . . . . . .$189.99400-116 99-00 Lightning 5.4L . . . . . . . . . . . . . . . . . . .$209.99400-118 97-02 F-150/Expedition V8 (Silver)

Fits both 4.6L and 5.4L (Not 32V) . . . . . . . . . .$239.9997-01 Lincoln Navigator Exc 32V Silver Tube4.6L and 5.4 . . . . . . . . . . . . . . . . . . . . . . . . .$239.99

400-121 2001 Ranger/Explorer 4.0L SOHC . . . . . . . . . .$159.99400-122 2002-03 Powerstroke DSL 7.3L . . . . . . . . . . . .$229.99400-124 2001-02 Lightning . . . . . . . . . . . . . . . . . . . . .$259.99520-130 2000-02 Nissan X-Terra/Frontier 3.3L . . . . . . . .$189.99

Replacing the O.E.M. factory air cleaner assembly with a precision engineered K&NFIPK or the Generation II, will provide fully maximized air flow potential, creating aninstant throttle response to please any performance enthusiast. To ensure all thepower and performance that your fuel injected stock engine is capable of giving,install a high quality K&N Filtercharger Injection Performance Kit and feel the powerin the air! You get better acceleration, instant power, and more passing power evenwhile towing by installing our FIPK Generation II. K&N gives you performance thatwill last for 10 years or one million miles, and we guarantee it!

Application Part# Generation II PriceFord88-95 Ford Pickup F-150, 250,350 57-2503 No $211.99

L6-4.9, V8-5.8, 7.5, 5.0 w/o mass air97-02 Ford F-Series 4.6, 5.4 57-2514-4 Yes $228.9994-97 F-Series 5.0, 5.8 w/mass air 57-2510-1 Yes $133.9999-03 Ford F-Series Super Duty V10-6.8L 57-2524-2 Yes $243.9999-03 Ford F-Series Super Duty, V8-5.4L 57-2525-2 Yes $255.9994-95 Ford Mustang V8-5.0L 57-2511 No $160.9996-03 Ford Mustang GT, V8-4.6L 57-2519-3 Yes $236.9996-99,01Ford Mustang Cobra 57-2523-2 Yes $163.9991-97 Ford Thunderbird 57-2505-1 No $107.9993-97 Ford Probe GT 57-2507 No $124.9988-95 Ford P/U-Bronco w/o mass air 57-2503 No $211.9995-97 Ford Explorer 4.0L OHV 57-2513-1 No $157.9900-03 Ford Focus L4 2.0L 57-2526-2 Yes $256.9901-03 Ford Explorer 4.0L SOHC 57-2529-1 Yes $228.9903 Ford Excursion 7.3L 57-2530 Yes $221.99Dodge/Jeep94-97 Dodge Ram V6-3.9L 57-1503 No $122.9997-99 Dodge Dakota V8 5.2L, 5.9L 57-1509 Yes $248.9998-99 Dodge Durango V8 5.2L, 5.9L 57-1509 Yes $248.9900-02 Dodge Durango V8-5.2L 57-1517-1 Yes $269.9900-03 Dodge Durango/Dakota 5.9L 57-1517-1 Yes $269.9994-02 Dodge Pickup

Full Size V8 5.2L, 5.9L 57-1511-1 Yes $282.9995-98 Dodge Viper V10-8.0L 57-1508 Yes $556.9995-99 Dodge Neon, L4-2.0L SOHC 57-1512 Yes $265.9993-98 Jeep Grand Cherokee 5.2L, 5.9L 57-1506-1 Yes $266.9999-03 Jeep Grand Cherokee 4.7L 57-1513-1 Yes $266.9997-03 Jeep Wrangler 4.0L 57-1514-1 Yes $238.9996-01 Jeep Cherokee L6 - 4.0L 57-1518 Yes $238.9903 Grand Cherokee L6 - 4.0L 57-1526 Yes $259.9901-03 PT Cruiser L4 2.8 57-1515-1 Yes $238.99GM96-00 Chevy Pickup 5.0, 5.7 57-3013-2 Yes $271.9996-02 Chevy S-10, 4.3 57-3017-2 Yes $249.9999-03 Chevy Silverado V8-4.8L, 5.3L 57-3021-1 Yes $253.9999-03 Chevy Silverado, V8-6.0L 57-3023-1 Yes $253.9996-00 Chevy P/U, Suburban V8-7.4L 57-3016-1 Yes $269.9997-00 Chevy Corvette V8-5.7L 57-3020 Yes $350.9903 Chevy Corvette V8-5.7L 57-3035 Yes $354.9988-95 C/K Pickup V8 5.0, 5.7L 57-3026 Yes $272.9988-95 C/K Pickup V8 7.4L 57-3027 Yes $270.9988-93 Chevy GMC S10/S15 V6 4.3L 57-3028 Yes $106.9901-03 Chevy/GMC P/U HD V8-8.1L 57-3030-1 Yes $259.9901-02 Chevrolet Silverado HD V8-6.0L 57-3031-1 Yes $260.9903 Silverado, Sierra 6-6.0L 57-3034 Yes $221.9901-03 Chevrolet Suburban V8-8.1L 57-3032 Yes $273.9902-03 Chevrolet Avalanche V8-5.3L 57-3033 Yes $266.9998-01 Camaro 5.7 V8 57-3022-2 Yes $320.99Acura00-01 Integra 1.8L 57-3509 Yes $203.99Toyota03 Tacoma 3.4L 57-9015-1 Yes $222.9903 Tacoma 2.4L & 2.7L 57-9016-1 Yes $231.99

AIRCHARGERPerformance Off-Road Filters


Ford 7.3 Turbo Diesel 1999-2002 Excursion, F250, F350.We have taken the World’s Best Flowing,Best Filtering, High Performance “Off -Road& Racing” Air Filters Plus the PowerProgrammer and Made Them into a Kit! ThePower Programmer will tune your motor forthe best and safest power and torque, plusallow for minor adjustments to shift firmnessin automatics. With the K&N Aircharger you

can get up to a 26 hp gain. Add that to the Hypertech Power ProgrammerIII’s 40 to 51 hp gain along with the 65 to 117 lbs. of torque and you get aPower Packed Kit!

Air

& F

uel

58

Performer CarbsEdelbrock’s Performer carburetor features two-piece, all-aluminum construction. The carbuses easily changed metering rods for precisetuning. The primary venturi booster is a bot-tom feed design for smoother accelerationand better drivability. Although made for otherEdelbrock products, the Performer Carb will

perform well with other brand manifolds and cams. All Performer Carbs aresquare flange.1400 600 CFM, Electric Choke, EGR . . . . . . . . . . . . . . . . . . .$254.991403 500 CFM, Electric Choke . . . . . . . . . . . . . . . . . . . . . . .$269.991404 500 CFM, Manual Choke, Non-Emission . . . . . . . . . . . .$216.991405 600 CFM, Manual Choke, Non-Emission . . . . . . . . . . . .$229.991406 600 CFM, Electric Choke, Non-Emission . . . . . . . . . . . . .$259.991407 750 CFM, Manual Choke, Non-Emission . . . . . . . . . . . .$239.991411 750 CFM, Electric Choke, Non-Emission . . . . . . . . . . . . .$269.991412 800 CFM, Performer Series Carb w/manual choke . . . . .$279.991413 800 CFM, Performer Series Carb w/electric choke . . . . .$319.99

Performer Kit

Q-Jet Series M4MCarb

For 1980-89 305-454 Chevy/GMC trucks with anelectric choke. Includes vacuum take-offs for full andtimed manifold vacuum. Compatible with EGR. Notfor computer-controlled vehicles. For light-duty pick-ups, Suburbans and vans (up to 1-ton). Main Jet:.073; Metering Rods: Primary-50M, Secondary-DR.

1901 750 CFM with divorced choke for 1966-73 327-454 Chevy/GMC trucks and cars . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$459.99

1902 750 CFM with divorced choke . . . . . . . . . . . . . . . . . .$441.991903 795 CFM hot air choke78-85 Chevy /GMC trucks & 75-79

Chevy cars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$469.991904 795 CFM with electric choke for 1980-89 305-350 Chevy/GMC trucks

and cars with divorced style choke . . . . . . . . . . . . . . $469.991906 795 CFM with electric choke for 1980-89 454 Chevy/GMC

trucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$469.99Verify your Exact Application Before Ordering

RemanufacturedPerformer Carburetors These remanufactured performer carburetors feature

two piece, all aluminum construction for cooler fuel and less warpage. There areno gaskets below the fuel bowl level for fewer leaks, and no plastic parts orpower valves to blow out. The carb uses easily changed metering rods for pre-cise tuning. The primary venturi booster is a boom feed design for smootheracceleration and better driveability. While make for use with Edelbrock parts, thePerformer carburetor is square bore and will perform well with any brand ofmanifold or cam with some minor returning. Completely remanufactured byEdelbrock. Reman Carbs are subject to availability. 9905 600 CFM, Manual Choke . . . . . . . . . . . . . . . . . . . . . . .$194.999906 600 CFM, Electric Choke . . . . . . . . . . . . . . . . . . . . . . .$209.999907 750 CFM, Manual Choke . . . . . . . . . . . . . . . . . . . . . . .$199.99

Chevrolet 262-400 Small Block2101Edelbrock Performer Manifold

1405Edelbrock 600 CFM Manual Choke Carb

1221Edelbrock Chrome Air Cleaner

5000Silicon beaded intake gaskets

Kit# 1700 . . . . . . . . . . . . . . .$375.99

Chrome Plated Fuel LineFittings2969G 3/8” NPT, Straight for 3/8” ID Hose . .$10.992970G 3/8” NPT, 90 Degree for 3/8” ID Hose$12.99

S/B Chevy Holley Power Matched KitsWe have taken Holleys polished 600 CFM electric choke carburetorand matched it to Holley”s, idle to 5500 RPM street dominator dualplan manifold and we top it off with Holley’s triple chrome 10” openelement air cleaner assembly. For Small Block Chevy.

120-145 Air Cleaner Assembly0-80457S New 600 CFM Polished Carburetor300-38 Street Dominator Intake Manifold5000 Silicon Beaded Intake GasketsKit # 1702 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$372.99

Adjustable Fuel LinesAdjustable to fit popular carburetors with dual feed side inletfittings. Available in chrome or red and blue clamp fittings.Includes 1/8” NPT port and plug for fuel pressure gauge.1555G Fits Holley 4150/4160 Carbs, w/Chrome Hose Ends . .$39.991556G Fits Holley 4150/4160 Carbs, w/Red & Blue Hose Ends$39.99

Fuel Line AccessoriesThe Fuel Line & Filter Kit, designed for EdelbrockPerformer Series carbs, includes a chromed hardsteel line and Russell fuel filter. Our convenient Pre-Fitted Stainless Lines connect the fuel filter to anEdelbrock street fuel pump with 3/8” NPT. TheChromed Steel Fuel Line is available with a barbedend and no fuel filter for universal applications.

Fuel Line & Filter Kit8134 Universal Kit for Edelbrock EPS carbs . . . . . . . . . . . . . . . . . . .$54.99Stainless Lines (from fuel filter to pump)8123 Small Block Chevy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.998124 Big Block Chevy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.998125 Small Block Fords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99Chromed Steel Fuel Line (no fuel filter)8126 Fuel line and hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99

Diesel Power Kit

Kit # Year K&N# Hypertech# Price1824 1999 63-1024 41007 $505.101825 2000 63-1024 41001 $505.101826 2001 63-1024 41012 $505.101827 2002 63-1024 41019 $505.10

1901

Performer RPM KitChevrolet 262-400 Small Block7101Edelbrock Performer RPM Manifold

1407Edelbrock 750 CFM Manual Choke Carb

1221Edelbrock Chrome Air Cleaner

5000Silicon beaded intake gaskets

Kit# 1701 . . . . . . . . . . . . . . . .$409.99

Performer RPM Q-Jet CarbThis carb is a high-performance version of the Q-Jetcalibrated for use with Performer RPM Q-Jet manifoldsand other high performance, non-emissions applica-tions. It has an 850 cfm air flow capacity, and the.145” diameter needle and seat assembly provides fuelflow to support 500+ hp. The unique secondary airvalve has special mixture distribution tabs for improvedair/fuel distribution and large idle discharge ports to

provide sufficient idle control for use with long duration camshafts. A totallyunique feature is the adjustable cruise air/fuel ratio for part throttle calibration.Other features include: early Chevy (1966-73) throttle arm and integral electricchoke. Main Jet: .074; Metering Rods: Primary-50M, Secondary-CE. NOTE: Notlegal for sale or use on pollution controlled motor vehicles.

1910 850 CFM, Electric choke . . . . . . . . . . . . . . . . . . . . . . .$489.99


Air &

Fuel

59

All Poweraid Throttle Body Spacers (TBS) kits are manufactured from air-craft quality billet 6061-T6 aluminum. Each kit includes all the necessarygaskets, hardware and precision brackets to maintain proper throttle andcruise control geometry. Poweraid TBS kits can be installed in less thanone hour. In fact, most kits are turnkey in only a half an hour! No drilling,cutting or fussing. Poweraid TBS is the ultimate intake system combinationwhen teamed up with our exclusive Airaid Intake Systems.

100-701 4BBL Holley . . . . . . . . . . . . . . . . . . . . . . . . . . .$94.99100-702 2BBL Holley . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.99100-705 Quadrajet . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99200-512 99-01 C/K “Silverado” 4.8,5.3, 6.0L Voctec . . . .$104.99200-514 2002 GM 4.8L, 5.3L, 6.0L; 2001-2002 8.1L . . .$104.99200-520 96-99 C/K 5.0-5.7 Vortec “Classic” May not work

with most aftermarket air intake systems . . . . . .$104.99200-522 85-92 5.7 F-Body/85-91 Vette . . . . . . . . . . . . .$122.99200-530 96-00 C/K 7.4 . . . . . . . . . . . . . . . . . . . . . . . .$114.99200-540 87-95 C/K 4.3, 5.0, 5.7 &S-10 94-95 4.3 . . . . . . .$79.99200-550 91-95 C/K 7.4 . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99200-551 87-90 C/K R/V 7.4 . . . . . . . . . . . . . . . . . . . . . . .$89.99200-580 96-02 S-10 4.3 also fits 96-99 fullsize 4.3L . . . . .$109.99200-581 87-93 S-10 4.3 TBI . . . . . . . . . . . . . . . . . . . . . . .$79.99200-582 86-90 2.8 V-6 S-10 . . . . . . . . . . . . . . . . . . . . . .$79.99200-583 96-99 3.1 V6 Lumina . . . . . . . . . . . . . . . . . . . .$99.99200-584 99-02 Impala - Grand Prix 3.8L . . . . . . . . . . . . . .$99.99200-586 2002 Envoy/Trailblazer 4.2L . . . . . . . . . . . . . . .$109.99300-560 92-01 Ram 3.9, 5.2, 5.9 May not work with

most aftermarket air intake systems . . . . . . . . . . .$89.99300-561 87-2000 Voyager 3.0-3.8 . . . . . . . . . . . . . . . . . .$99.99300-562 93-97 Dodge Intrepid 3.5L/FI . . . . . . . . . . . . .$149.99300-565 94-00 Dodge V-10 Ram . . . . . . . . . . . . . . . . . . .$99.99300-567 2002 Dodge Ram 4.7L . . . . . . . . . . . . . . . . . .$114.99300-570 97-01 Dakota/Durango 3.9, 5.2, 5.9 . . . . . . . . .$89.99300-575 00-01 Dakota/Durango 4.7 . . . . . . . . . . . . . . .$104.99300-568 01-02 PT Cruiser . . . . . . . . . . . . . . . . . . . . . . . .$89.99310-510 91-99 4.0L Jeep . . . . . . . . . . . . . . . . . . . . . . . .$79.99310-511 91-01 2.5L 4cyl Jeep . . . . . . . . . . . . . . . . . . . . .$79.99310-513 00-01 4.0L Jeeps . . . . . . . . . . . . . . . . . . . . . . . .$79.99400-507 2001 Ford Ranger 4.0L SOHC SportTrac . . . . . .$109.99400-517 98 5.0L Explorer/Mountaineer . . . . . . . . . . . . .$114.99400-518 96-00 4.6L Crown Victoria . . . . . . . . . . . . . . . . .$94.99400-519 94-98 Mustang V-6 3.8 . . . . . . . . . . . . . . . . . .$104.99400-521 01-02 Powerstroke 7.5L DSL . . . . . . . . . . . . . . . .$89.99400-525 86-87 5.0 Mustang . . . . . . . . . . . . . . . . . . . .$109.99400-526 88-93 5.0 Mustang . . . . . . . . . . . . . . . . . . . . . .$94.99400-527 87-95 F150/Bronco 5.0, 5.8 . . . . . . . . . . . . . .$109.99400-528 91-95 F250/350 7.5 . . . . . . . . . . . . . . . . . . . .$124.99400-529 94-95 Mustang 5.0 . . . . . . . . . . . . . . . . . . . . . .$94.99400-588 98-00 Ranger 2.5L . . . . . . . . . . . . . . . . . . . . .$109.99400-590 97-02 4.6L F150/Expedition/Navigator . . . . . . . .$94.99400-591 97-02 F150/Expedition 5.4L . . . . . . . . . . . . . . . .$94.99400-592 99-01 Super Duty V-10 . . . . . . . . . . . . . . . . . .$109.99400-593 87-96 I-6 300 C.I. F-150 . . . . . . . . . . . . . . . . .$109.99400-594 99-01 3.8 Mustang . . . . . . . . . . . . . . . . . . . . .$109.99400-595 99-00 Powerstroke . . . . . . . . . . . . . . . . . . . . . .$89.99400-596 97-00 4.2 V6 F-150 . . . . . . . . . . . . . . . . . . . .$109.99400-597 99-02 5.4L S/D . . . . . . . . . . . . . . . . . . . . . . . . .$94.99400-598 99-01 4.0L Explorer XLT (SOHC only) . . . . . . . .$109.99510-502 95-01 V-6 3.4L Tacoma/4Runner . . . . . . . . . . .$109.99510-566 00-01 Tundra V8 4.7 . . . . . . . . . . . . . . . . . . . .$109.99520-505 99-01 Frontier/Pathfinder 3.3L . . . . . . . . . . . . .$109.99

Universal Carburetor AdaptersImproving horsepower and/or fuel economy iseasy with our carburetor adapters. These kits comecomplete with studs, nuts, washers and 1/16" thickcelulose-nitrile gaskets.2025 2V carburetor to 1V base . . . . .$12.99

2086 Large Holley 2V carburetor to Rochester 2V base . . . . . .$12.992087 4-bolt Holley 2V carburetor to Quadrajet base . . . . . . . .$18.992065 4V carburetor to 4-bolt 2V base . . . . . . . . . . . . . . . . . . .$14.992064 Large port 4V carburetor to small port 4V base . . . . . . .$13.992066 Holley/AFB 4V carburetor to Quadrajet base . . . . . . . . . .$13.992090 Holley/AFB carburetor to Holley/AFB base . . . . . . . . . . .$14.99

“Mixture Channel” SpacersOur exclusive SWIRL-TORQUE spacers use channels and steps to offer perform-ance gains that far surpass any standard carb spacer. The “Mixture Channels”improve low to mid RPM torque and pulling power.

2431 1" Holley/AFB ported spacer w/”Mixture Channels” Aluminum $34.992432 2" Holley/AFB ported spacer w/”Mixture Channels” Aluminum $37.99

“Mixture Step” SpacerThe “Mixture Steps” offer improved WIDE-OPEN throttle performance makingthem perfect for racing applications.

2438 1" Holley/AFB ported spacer w/”Mixture Steps” Aluminum . .$31.99

Carb Adapter and Adapter PlatesFour hole, Square-bore to Spread-bore Adapter (.850" thick)Mounts Edelbrock square-bore carbs to stock Quadrajet and Thermo-Quad manifolds.2696 . . . . . . . . . . . . . . .$31.99Square-bore to Spread-bore Adapter Plate (1/16" thick)Mounts square-bore Holley carb to spread-bore carb pad onEdelbrock intakes (except #2101 and #3701)2732 . . . . . . . . . . . . . . . .$5.99

Heat Insulator GasketsDesigned to help prevent fuel percolation in Performer SeriesCarburetors exposed to extreme underhood temperatures.#9266 features a divided center which is designed to seal thecarburetor to dual-plane Performer and Performer RPM mani-folds. Gasket comes with extended carb studs. Divided Square-Bore Heat Insulator Gasket (0.320" thick)

9266 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.99

Inline Street Fuel FiltersThese Billet aluminum filters utilize a sintered bronze filter ele-ment. Part Description Price10203 Blue 3/8 . . . . . . . . . . . . . . . . . . . . .$10.9910204 Red 3/8 . . . . . . . . . . . . . . . . . . . .$10.9910205 Brite Alum. 3/8 . . . . . . . . . . . . . . . .$10.9910202 Brite Alum. 5/16 . . . . . . . . . . . . . . .$10.9910220 Replacement Element . . . . . . . . . . . . .$2.99

Fuel Pressure GaugeThe Professional Products Fuel Pressure Gauge features a 1-1/2'' diameter case, a chrome bezel, and a male 1/8-NPT fit-ting centered on the back. This is not a liquid filled gauge.11112 0-15 Fuel Pressure Gauge

1/8-NPT Male Fitting . . . . . . . .$8.99


Air

& F

uel

60

Street Rod Fuel FilterThis is a smaller version of our super popular com-petition filter. It features a universal chrome bracketwith stainless steel attaching hardware and a highquality polished chrome housing.

InstallationAccessories

Performer Series CarbAccessoriesStep-Up Spring Assortment (5 pair)Includes 3" Hg (blue), 4" Hg (yellow), 5" Hg(orange), 7" Hg (pink) and 8" Hg (plain)springs.1464 . . . . . . . . . . . . . . . . . . . . .$4.99Off-Road Needles and Seats (pair)Includes a pair of spring loaded needles and.0935" seats.1465 . . . . . . . . . . . . . . . . . . . .$9.99Choke Cap KitIncludes choke cap and gasket, 3 screws and3 locking tabs.1474 . . . . . . . . . . . . . . . . . . . .$19.99Electric Choke KitIncludes all parts necessary to convert #1404,#1405 and #1407 Edelbrock Performer SeriesCarburetors to electric choke.1478 . . . . . . . . . . . . . . . . . . . .$47.99Chevy Cruise Control KitRequired for OEM cruise control hook-up.1484 . . . . . . . . . . . . . . . . . . . .$14.99

Chrysler & FordThrottle LeverAdapters#1481 fits 1966 and later Chryslers.#1483 is for Ford automatic transmissionequipped vehicles (except A.O.D.). Bothaccept cruise control. Use with appropri-ate throttle cable plate when necessary.1481 Chrysler Throttle Adapter

(1966 and later) . . . . . .$4.991483 Ford Throttle Adapter

(1968 and later) . . . . .$13.99

Calibration KitsKits include metering rod, jet and step-up spring sets and 2 metering rodretaining springs.

1487 Kit for Performer #1406

(600 CFM) . . . . . . .$32.991480 Kit for Performer #1407 and

#1410 (750 CFM) . . . . . . . . . . . . . . . .$43.99

Multi-CarbBraided FuelLine KitsHigh-Tech braided stainlesssteel fuel line with AN fittingssupplies fuel to twoEdelbrock carbs when usedon Edelbrock Dual-Quadmanifolds #5420, #5421,

#5425, #5435 and #5440. A fuel kit, suchas our #8122 or #8127, will also be need-ed for connection to the fuel pump.Features 6-7/16" center-to-center spacing,1/8" NPT fuel pressure tap and a 3/8" NPTfuel inlet.

8088 Dual Quad Fuel Line Kit $49.99

Performer Series Carb Maintenance KitsFloat KitIncludes 2 floats, 2 pins and a float settinggauge.1469 . . . . . . . . . . . . . . . . . $ 8 . 9 9Accelerator PumpIncludes accelerator pump, spring and cupassembly.1470 . . . . . . . . . . . . . . . . . $ 6 . 9 9Gasket KitIncludes all gaskets for all Edelbrock PerformerSeries Carbs, plus airhorn and carb-to-manifoldgasket.1472 . . . . . . . . . . . . . . . . . . . . .$5.99Carburetor Rebuild KitIncludes all parts and gaskets necessary torebuild all Edelbrock Performer Series carbure-tors.1477 . . . . . . . . . . . . . . . . . . .$28.99

General Motors8009 Throttle Cable Adapter Designed for Chevy

(1977 and later) . . . . . . . . . . . . . . . . . . . .$3.998012 Throttle or Automatic Trans Cable extension

Kit Chevy . . . . . . . . . . . . . . . . . . . . . . . . .$4.998018 Automatic Trans Kickdown Stud 1982 & later

TH350 & 700R4 . . . . . . . . . . . . . . . . . . . .$2.998036 Throttle, Cruise Control & Transmission Kick-down

Mounting Bracket Cad. plated gold-S/B Chevy (78 & earlier) . . . . . . . . . . . . . . . . . . . . .$24.99

8059 Throttle Solenoid and Bracket for EdelbrockPerformer Series carbs . . . . . . . . . . . . . . .$84.99

8096 Vacuum Fitting (low profile) for Holley Double-Pumper when used with #2101 and #5001 $7.99

8901 Choke Adapter for #2101 and #2104 Small Block Chevy (supplied with manifolds) . . .$10.99

9171 Automatic Divorced Choke Rod for #2101 and #3701Q-Jet carburetor . . . . . . . . . . . . . . .$4.99

Ford8016 Ball End Stud (Holley Carbs) . . . . . . . . . . . .$4.99Miscellaneous8089 Banjo Fitting for Edelbrock square-bore & Carter AFB

carbs (5/8”-20) . . . . . . . . . . . . . . . . . . . . .$9.998090 Inverted Flare Fuel Line Fitting 3/8” for

Edelbrock sq-bore & AFB carbs . . . . . . . . . .$9.99

FuelPressure Regulator

Regulates pressure from 4 to 9 PSI, 3/8"NPT ports, .220" restriction (7/32").Includes mounting bracket.12-803 . . . . . . . . . . . . . . . .$22.9912-804 4 to 9 PSI . . . . . . .$24.99

ElectricFuel Pump

Service KitsCheck Valve Kits12-805 12-801-1 pump . .$10.9912-806 12-802-1 pump . .$10.99

Braided Stainless Steel FuelLineDesigned for use on any Holley model 4150 carburetor, thisline sports a natural billet aluminum appearance.34-29 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $59.99

Chrome Fuel LineDesigned for use on any Holley model 4010 carburetor.Features 5/8-18 inverted flare fuel fittings and 1/8 NPT pressure gauge tap.

34-410 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99

Chrome Fuel LineDesigned for use on any Holley model 4011 carburetor.Features 5/8-18 inverted flare fuel fittings and 1/8 NPT pressure gauge tap.

34-411 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99

Carburetor Main BodiesTurn your street carb intoa high-performance carbin less than 30 mins! Addup to 25-50 HP with

Proform's 100% NEW High-Performance CarbMain Bodies.67100C 650 CFM & 750CFM w/mech.

secondaries . . . . . . .$99.9967101C 750 CFM Vacuum Secondary

Carb . . . . . . . . . . . .$99.99

Ford Throttle Cable Plate Kits

Repositions stock throttle cable bracket toalign with Edelbrock carb throttle arm.Use with Edelbrock Throttle LeverAdapter #1483 and stock throttle cablebracket. Designed for Fords with cableactivated throttle and automatic transmis-sion kickdown rod.1490 Ford 289-302 . . . . . .$7.99

1491 Ford 351W . . . . . . . . . . . . . . . . . . . . . . .$5.991493 Ford 351M/400 . . . . . . . . . . . . . . . . . . . .$5.991495 Ford 429-460 . . . . . . . . . . . . . . . . . . . . . .$5.99

10100 Competition Fuel Filter Assembly* . . .$29.9910120 Replacement Element for 10100 . . . . . .$4.9910102 Street Rod Fuel Filter Assembly* . . . . .$25.9910122 Replacement Element for 10102 . . . . . .$3.99(*Assembly includes element.)

BilletMeteringBlock

Further enhance the performance of yourPROFORM™ high flow main body with billetmetering blocks. Machined from solid alu-minum, virtually eliminates porosity problems,and will not warp. Features changeable idlefeed restriction with additional upgrades avail-able for racing applications.67150C . . . . . . . . . . . . . . . . .$64.99

BilletThrottleBase PlatesUpgrade your carb. Thisbase plate comes with

button torx head throttle plate screws,adjustable secondary air flow cam bracket,timed and full vacuum tubes for accessoriesand tuning, slip link mechanical secondarylinkage, and power valve blow out protec-tion.67155 650 CFM, 700 CFM,

750 CFM & 800 CFM $139.9967156 850 CFM . . . . . . . . .$139.99

NEW! ThunderSeries AVS CarbsThe new Thunder Series AVS carbs shareall the performance advantages of thepopular Edelbrock Performer Series withinnovative new features. The Qwik-Tunesecondary air valve can be easily adjusted

to match your needs. Whether you want the secondaries to “kick in” early orlate, you can set the air valve using standard tools, with no extra springs. It’sa quick and simple process. Qwik-Tune combined with the other great fea-tures makes the Edelbrock Thunder Series AVS the most convenient anddependable carburetor available today. For 4x4 owners, the Thunder SeriesAVS off-road carbs include spring-loaded needles and seats for outstandingperformance in rough, uneven terrain. Edelbrock engineers have taken agreat carburetor and made it even better with the exciting new EdelbrockThunder Series AVS!

1805 650 cfm, manual choke $329.991806 650 cfm, electric choke $359.991812 800 cfm, manual choke $369.991813 800 cfm, electric choke $399.99Dual Feed Fuel Line for Thunder Series Carbs8132 No filter, 3/8” barbed end outlet $59.998128 With polished aluminum filter $79.998133 With blue anodized filter $79.99


Air &

Fuel

61

Holley Performance Carburetors500 CFM Two Barrel New Polished LookModel 2300, Features: Manual Choke, Center hung float bowl, Universalthrottle lever, Ford A/T kickdown, 50cc accelerator pump, Power valve blow-out protection, All metal parts.0-4412S 500 CFM Two Barrel . . . . . . . . . . . . . . . . . . . . . . .$214.99600 CFM Four Barrel New Polished LookModel 4160, Features: Manual Choke, Universal calibration (1964 & earlier),Single feed/side hung float bowls, Power valve blow-out protection, Vacuumsecondaries, all metal parts.0-1850S 600 CFM Four Barrel . . . . . . . . . . . . . . . . . . . . . . .$229.99600 CFM Four Barrel New Polished LookModel 4160, Features: Automatic electric choke, Single feed/side hung floatbowls, Power valve blow-out protection, Vacuum secondaries and all metalparts. Universal Chevy Ford & Chrysler.0-80457S 600 CFM Four Barrel . . . . . . . . . . . . . . . . . . . . . .$241.99650 CFM Four BarrelModel 4150, Features: Manual choke, Double pump, Mechanical secondar-ies, Dual feed/center hung float bowls, Power valve blow-out protectionand all metal parts.0-4777C 650 CFM Four Barrel . . . . . . . . . . . . . . . . . . . . . . .$329.99750 CFM Four Barrel New Polished LookModel 4160, Features: Manual choke, Dual feed/center hung float bowls,Vacuum secondaries, Power valve blow-out protection and all metal parts.0-3310S 750 CFM Four Barrel . . . . . . . . . . . . . . . . . . . . . . .$242.99750 CFM Four BarrelModel 4150, Features: Manual choke, Dual feed/center hung float bowls,Double pump, Mechanical secondaries, Four corner idle system, Powervalve blow-out protection and all metal parts.0-4779C 750 CFM Four Barrel . . . . . . . . . . . . . . . . . . . . . . .$399.99750 CFM Four Barrel Legacy Series New Polished LookModel 4160, Features: Electric choke, Ford A/T kickdown, Dual feed/centerhung float bowls, Power valve blow-out protection, all metal parts.0-80508S 750 CFM Four Barrel . . . . . . . . . . . . . . . . . . . . . .$269.99750 CFM Four BarrelModel 4150 HP, Features: Double-step down leg boosters, Calibrated forgasoline, Double 30cc accelertator pumps, Progressive mechanical secondar-ies, PCV, spark and manifold vacuum ports, Four corner idle, Street or strip.0-80528-1 750 CFM Four Barrel . . . . . . . . . . . . . . . . . . . . .$559.99600 CFM Four BarrelModel 4150, Features: Manual choke, Double pump, Dual feed center hungfloat bowls, Mechanical secondaries, All metal parts.0-4776C 600 CFM Four Barrel . . . . . . . . . . . . . . . . . . . . . . .$299.99390 CFM Four BarrelModel 4160, Features: Electric choke, Vacuum secondaries, Single feed/sidehung float bowls, Universal throttle lever. Designed for V6 engines and smalldisplacement V8’s.0-8007 390 CFM Four Barrel . . . . . . . . . . . . . . . . . . . . . . . .$299.99

Street Avenger CarburetorsIntroducing The Holley Street Avenger carburetor. The firsttrue performance carburetor designed, dyno tested, streetproven and calibrated specifically for the street.0-80570 570 CFM 4 BBL Square Bore w/Vacuum

Secondaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.990-80670 670 CFM 4 BBL Square Bore w/Vacuum Secondaries$359.990-80770 770 CFM 4 BBL Square Bore w/Vacuum Secondaries$379.99Truck Avenger Carburetor Off Road Ready Right Out of the Box!0-90670 670 CFM Stock-400 HP . . . . . . . . . . . . . . . . . .$389.99

Some High Performance Products Not Legal for Sale or Use onEmission Controlled Vehicles

0-80508S

Remanufactured FuelInjectors

2356 Buick Electra 84-87 MFI 3.8L . . . . . . . . . . . . . .$25.99*2858 Chevy Camaro 89-92 MFI 5.7L . . . . . . . . . . . . .$25.99*4686 Chevy Monte Carlo 86-88 TBI 4.3L . . . . . . . . . .$30.99*7718 Chevy Pickup 1/2 ton 88-95 TBI 5.0L . . . . . . . .$30.99*9864 Chevy S10 Blazer 87-91 TBI 2.5L . . . . . . . . . . . .$30.99*8126 Dodge Dynasty 89-90 MFI 3.0L . . . . . . . . . . . .$25.99*7108 Ford Crown Victoria 86-91 EFI 5.0L . . . . . . . . . .$26.99*7188 Ford F150 88-97 EFI 5.8L . . . . . . . . . . . . . . . . .$26.99*7696 Oldsmobile Calais 89-91 MFI 3.3L . . . . . . . . . . .$25.99*5154 Pontiac Grand Am 88-89 MFI 2.3 D code . . . . .$25.99*

*Prices exchange/core prices vary

0-80670

Power+Plus ManifoldsPower+Plus is the newest line of per-formance intake manifolds available. Asa result, we have been able to incorpo-rate many new features in our mani-folds not found in competitive models.Some of today’s most popular manifoldswere designed 30 years ago and themakers have never bothered to updatethe tooling to include many of the newfeatures desired by performance enthu-

siasts. We engineered those features into our manifolds.52000 SB Chevy Polished . . . . . . . . . . . . . . . . . . . . . . . .$139.9952001 SB Chevy Satin . . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.9952006 SB Chevy Vortec Polished . . . . . . . . . . . . . . . . . . .$149.9952007 SB Chevy Vortec Satin . . . . . . . . . . . . . . . . . . . . .$119.9952020 SB chevy 180° Polished . . . . . . . . . . . . . . . . . . . .$154.9952025 SB Chevy CrossWind Polished . . . . . . . . . . . . . . . .$179.9952030 SB Chevy 360° Polished . . . . . . . . . . . . . . . . . . . .$179.9952031 SB Chevy 360° Satin . . . . . . . . . . . . . . . . . . . . . .$134.9953000 BB Chevy 180° Polished Oval Port . . . . . . . . . . . .$154.9953030 BB Chevy 360° Polished Rect. Port . . . . . . . . . . . .$229.9954000 SB Ford Polished . . . . . . . . . . . . . . . . . . . . . . . . .$149.9954020 5.0L Ford EFI Polished . . . . . . . . . . . . . . . . . . . . .$399.9954021 5.0L Ford EFI Satin . . . . . . . . . . . . . . . . . . . . . . . .$299.9954025 SB Ford CrossWind Polished . . . . . . . . . . . . . . . . .$189.99


Air

& F

uel

62

Fuel Pump Pushrod11985-1 Chevy V8 262 thru 400 and 396 thru 454

(for 8620 steel roller camshaft) . . . . . . . . . . . . . . .$14.9911986-1 Chevy V8 262 thru 400 and 396 thru 454

(for cast camshafts) . . . . . . . . . . . . . . . . . . . . . . . .$14.99

Fuel Pump PushRodPR-1 S/B Chevy Fuel Pump Push Rod . . .$10.99

Performer EPS Manifold for S/B ChevyDesigned for 1986 and earlier 262-400 cubicinch Chevy’s, the all -new Performer EPS is opti-

mized to deliver superior performance with Edelbrock square-bore performerseries carburetors. All new runner design that’s “tuned” for peak torque around3500 rpm and 350 inch engine and it’s ideal for power from off-idle to 5500rpm. Dyno test showed peak gains of 5 hp and 9 ft/lbs. of torque over theEdelbrock Performer manifold #2101 on a 350 Chevy. Across the 3000 to 4500rpm range. 2701 For 1986 and earlier Chevy 262-400 c.i.d. engines . . . .$129.99

Quality Fuel PumpsM6624 Small Block Chevy 2-line . . . . . .$12.99M6626 Small Block Chevy 3-line . . . . . .$12.99

We sell a full line of Mechanical Fuel PumpsCall for Your Application Today!

Super Mechanical Fuel PumpsContain Heavy-duty diaphragms, high speed “anti-float” springs, large “full flow” valves, lightweight allaluminum castings and heat-treated lever.

M6900 Chevrolet S/B 283, 302, 327, 350, 400 (PSI/GPH 6/120) $59.99M6901 Chevrolet B/B 396, 402, 427, 454 (PSI/GPH 6/120) . . . .$59.99M6902 Chrysler 273, 318, 340, 360 (PSI/GPH 6/120) . . . . . . . .$59.99M6904 Ford 289, 302, 351W (PSI/GPH 6/120) . . . . . . . . . . . . .$59.99M60969 Chevrolet S/B (PSI/GPH 6-7/172) . . . . . . . . . . . . . . . . .$74.99

Performer Air-Gap(idle-5500 rpm)

Designed for 1955-85 262-400 c.i.d. small-blockChevys. This design features an open air space thatseparates the runners from the hot engine oil result-ing in a cooler, denser charge for more power. High-velocity runners deliver excellent throttle responsethroughout the power band. No provision forexhaust heated chokes or exhaust crossover. For

spread-bore or square-bore carburetors without adapter. Available with standardfinish or polished.2601 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$195.99

Mechanical Fuel PumpsMaximum fuel flow. Flows 130+ GPH (free flow). Heavyduty construction for continuous high RPM performance.12-327-13 Chevrolet 283-400 V8 . . . . . . . . $66.99

High output fuel flow, Flows 110 GPH (free flow), Heavyduty construction for continuous high RPM running.12-327-11 Chevrolet 283-400 V8 . . . . . . . . $56.99

Victor Series Racing Fuel PumpsFlow capacity for Edelbrock’s 6-Valve Racing Fuel Pumpis 130 gallons per hour as compared to conventionalracing pumps at 114 gallons per hour. A must for dragracing, or any application that demands a high-volumefuel delivery. Beautifully detailed with aircraft-type allenbolts. 13 to 14 psi. For gasoline and alcohol.1711 Small Block Chevrolet . . . . . . . . . . .$78.991712 Big-Block Chevrolet . . . . . . . . . . . . .$78.991715 Ford 289-351W . . . . . . . . . . . . . . .$75.991799 Fuel Pump Repair Kit . . . . . . . . . . .$45.99

Intake Manifolds

1957-1986 Street Dominator• High rise/dual plane design• Idle-7200 RPM power band• No EGR provision• Square flange carburetor mounting300-36 57-86 SB Chevy w/Aluminum Heads . . . . . . . . . . . .$119.99

SB Chevy Spread Bore Carb BaseStreet Dominator• Low rise/dual plane design• Idle-5500 RPM power band• No EGR provision • Spread bore andsquare bore carburetor mounting flanges300-38 SB Chevy Spread Bore Carb Base . . . . . . . . . . . . . . .$107.991957-1986 50 State Street Legal• High rise/dual plane design• Idle-6000 RPM power band• EGR provision• Square flange carburetor mounting 300-48 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$147.99

Electric Fuel PumpsThe most popular street performance & racing pumps ofall time. Distinctive “red” and “blue”colors. Provide con-stant fuel flow with no pulsation. Weigh only 2.88 lbs.Externally accessible pressure relief valve. Not compatiblewith alcohol or methanol. 12-802-1 Fuel Pump Includes12-803 high pressure regulator.12-801-1 97 gph,Street Pump . . . . . . . . . .$84.9912-802-1 110 gph, Street/Race . . . . . . . . .$99.99

Fuel Pump Block-OffPlates With Gasket66106 Chevy S/B . . . . . . . . . . . . . . . .$3.9966107 Chevy B/B & most V6; Ford 289-302;

Chrysler 273-440 . . . . . . . . . . .$3.99

ReTechElectric Fuel PumpsPremium Quality Remanufactured Fuel Pump.Built by an O.E.M. Remanufacturer with morethan 50 years of experience to assure you of adependable replacement for your vehicle.• Computerized Performance Testing• Computerized Leak Testing

• Guaranteed OE Fit • Pump Only or Entire In-Tank Assembly• Warranty 12 months or 12,000 miles • Core ChargeRE0204P 1989-92 Buick Century 2.5R . . . . . . . . . . . . . . . . . .$39.99RE0207P 1989-96 Buick Regal 3.1 T/M, 3.8L . . . . . . . . . . . . .$41.99RE0206P 1985-92 Chevrolet Camaro 2.8 s, 3.1T . . . . . . . . . .$35.99RE0202P 1985-92 Chevrolet Camaro 5.0F, 5.7 8 . . . . . . . . . .$39.99RE0220P 1986-94 Chevrolet S10 Blazer 2.8, 4.32 . . . . . . . . .$26.99RE0268F 1991-93 Dodge Daytona 2.5 Ex. Turbo . . . . . . . . . .$94.99RE0265S 1991-93 Dodge Caravan 3.0 2WD . . . . . . . . . . .$107.99RE0262P 1988-90 Dodge Truck 5.2, 5.9 . . . . . . . . . . . . . . . .$46.99RE0067F 1987-93 Ford Mustang 5.0 . . . . . . . . . . . . . . . . . .$63.99RE0099S 1991-94 Ford Explorer All Gas . . . . . . . . . . . . . . . . .$64.99RE0064S 1990-97 Ford Ranger 2.9, 3.0, 4.0 Super Cab . . . .$62.99RE0427P 1992-97 Honda civic 1.5, 1.6 . . . . . . . . . . . . . . . . .$98.99Check application before ordering • Prices do not include core charge

Air &

Fuel

63

RPM Air Gap Intake Manifolds

Edelbrock engineers designed the first and onlydual-plane manifold with the powerful air-gap

design…the same race-winning design used in Edelbrock VictorSeries intakes. These manifolds deliver a cooler, denser charge formaximum horsepower from 1500 to 6500 + rpm with 9.5:1compression.7501 SB Chevy . . . . . . . . . . . . . . . . . . . . . . . . .$199.997561 BB Chevy (oval-port) . . . . . . . . . . . . . . . . .$234.997562 BB Chevy (rectangular-port) . . . . . . . . . . . .$234.997576 SB Chrysler . . . . . . . . . . . . . . . . . . . . . . . .$234.997521 SB Ford . . . . . . . . . . . . . . . . . . . . . . . . . .$234.997516 SB Chevy Vortec 1996 and later . . . . . . . .$219.997531 AMC 304-401 c.i.d engines for 1970 & later $289.997530 AMC 290-390 c.i.d. engines for 1967-69 . .$289.99

Performer Manifolds and Cam KitsEdelbrock’s Performer and Performer RPM intake manifolds and hydraulic camshaft kits are dyno-matched to give you the horsepoweryou’re looking for. The Performers are dual-plane manifolds that boost power from off-idle to 5,500 rpm. Some are even direct stockreplacements that accept the stock carburetor and emissions equipment. The Performer RPMs are high-rise dual-planes to give you powerin the 1,500-6,500 rpm range. They are ideal for use with modified cylinder heads and Edelbrock recommends using their Performer 750CFM square-bore carb #1407. The Performer-Plus hydraulic cam kits build horsepower with good idle and vacuum too. The kit includescam, lifters and lube.

Application Manifold Manifold Cam Kit Lift Duration @ .050” Cam KitPart No. Price Part No. Int Exh Int Exh Price

AMC Performer 304-401 (non-EGR) 70-up 2131 $179.99 2132 448 472 204° 214° $129.99Buick 231 V6 1979-up Evenfire (non-EGR) 5486 $165.99 5487 448 472 204° 214° $127.99Buick 400-455 c.i.d. V8 (non-EGR) 2146 $239.99 N/AChevy 4.3L V6 w/TBI 1987-94 (EGR) 3713 $230.99 3714# 479 488 210° 214° $242.99Chevrolet 262-400 c.i.d. V8 (non-EGR) 2101 $114.99 2102 420 442 204° 214° $114.99Chevrolet 262-400 c.i.d. V8 (EGR) 3701 $145.99 3702 398 442 194° 214° $129.99Chevrolet 262-400 c.i.d. V8 w/ 1987-95 heads (non-EGR) 2104 $152.99 N/AChevrolet 305-350 c.i.d. TBI V8, 1987-up (EGR) 3704* $219.99 N/AChevrolet 396-454 c.i.d. V8 (non-EGR) 2161 $169.99 2162 500 500 218° 228° $115.99Chrysler 318-360 c.i.d. V8 (non-EGR) 2176 $179.99 2177 420 420 204° 204° $127.99Chrysler 318-360 c.i.d. V8 (EGR) 3776 $199.99 2177 420 420 204° 204° $127.99Chrysler 361-400 c.i.d. V8 (non-EGR) 2186 $179.99 2192 420 442 204° 214° $155.99Chrysler 413-440 c.i.d. V8 (non-EGR) 2191 $179.99 2192 420 442 204° 214° $155.99Ford 260-302 c.i.d. V8 (non-EGR) 2121 $139.99 2122 448 472 204° 214° $121.99Ford 351 Windsor V8 ( non-EGR) 2181 $169.99 2182 448 472 204° 214° $125.99Ford 351M-400 c.i.d. V8 (non-EGR) 2171 $186.99 2172 484 510 204° 214° $125.99Ford 351 Cleveland V8 (non-EGR) 4V 2665 $179.99 N/AFord 351 Cleveland V8 (non-EGR) 2V 2750 $189.99 N/AFord 352-428 c.i.d. V8 (non-EGR) 2105+ $239.99 2106 460 480 194° 204° $124.99Ford 429-460 c.i.d. V8 (non-EGR) 2166*** $179.99 2167 460 480 194° 204° $124.99Ford Mustang 5.0L V8 (EGR) 3821 $489.99 N/AFord Pick-ups 5.0L EFI V8 (EGR) 3841 $514.99 N/AFord Pick-ups 5.8L V8 (EGR) 3881 $539.99 N/AOlds 330-403 c.i.d. V8 (EGR/non-EGR) 3711 $199.99 3712 448 472 204° 214° $145.99Olds 400-455 c.i.d. V8 2151 $229.99 N/APontiac 326-455 c.i.d. V8 (non-EGR) 2156 $179.99 2157 420 442 204° 214° $141.99

*Bolt on replacement for stock TBI manifold, no computer mods required +Not for use with high rise heads.

***Will not fit 1988-90 models. #Roller Lifters not included

Performer RPM Manifolds and Cam KitsApplication Manifold Manifold Cam Kit Lift Duration @ .050” Cam Kit

Part No. Price Part No. Int Exh Int Exh PriceChevy 262-400 (non-EGR) 7101 $129.99 7102 488 510 234° 244° $183.99Chevy 262-400 w/spreadbore carb 7104 $149.99 7102 488 510 234° 244° $183.99Chevy 262-400 w/1996 Gen-1 Heads 7116 $175.99 N/AChevy 396-454 oval port (non-EGR) 7161 $189.99 7162 560 573 240° 246° $192.99Chevy 396-454 rect. port (non-EGR) 7163 $199.99 7162 560 573 240° 246° $192.99Chevy 396-454 w/spreadbore carb 7164 $199.99 7162 560 573 240° 246° $192.99Chrysler 340-360 (non-EGR) 7176 $198.99 N/AChrysler 413-426-440 (non-EGR) 7193 $197.99 7194 480 495 238° 246° $175.99Ford 289-302 (non-EGR) 7121 $154.99 7122* 496 520 224° 234° $149.99Ford 351W (non-EGR) 7181 $189.99 7182 496 520 224° 234° $147.99Ford 390-428 (non-EGR) 7105 $299.99 7106 480 495 204° 214° $158.99Ford 429-460 (non-EGR) 7166 $199.99 7167 556 581 234° 244° $174.99Olds 330-403 (non-EGR) 7111** $214.99 7112 496 520 224° 234° $199.99Pontiac 326-455 1965-up 7156 $184.99 7157 470 470 231° 240° $189.99

*Not for use with 1985-up roller cam-equipped engines. **Can be used on 1980 1/2-85 307 engines. Port flange has enough material for use w/455 heads.

Some HighPerformance ProductsNot Legal for Sale or

Use on Pollution Controlled Vehicles

#2101

#7101

#2975

#2925

#2161

#7161

#2121

#7121

#3821

#3881

Torker II ManifoldThe Torker II is a single -plane manifold that can give you top endpower without affecting the midrange. What Edelbrock did wasincrease the plenum volume and alter the short side radius of therunners to give the air/fuel charge a straight shot at the intakevalves. That straight shot makes the Torker II a potent powerbuilder across the 2,500-6,500 RPM range.5001 Small Block Chevy . . . . . . . . . . . . . . . . . .$99.99

Victor ManifoldsVictor manifolds are the most popular and flexible racing mani-folds. The Victor manifolds boost power where engines use it themost - 3,500-8,000 RPM range. All Victor and Victor Jr’s haveextra port material for port matching, a relief for dry sump pres-sure-in lines and accept square-bore Holley carbs. Small BlockChevy (not for use w/1987-up cylinder heads)

2975 Victor Jr. . . . . . . . . . . . . . . . . . . . . . . . .$179.992925 Super Victor for 23° Heads . . . . . . . . . .$209.99


Bow-Tie Wing Nuts1/4” x 20 threads. 4 per package.141-756 Black Crinkle . . . . . . . . . . .$15.99


Dre

ss U

p

64

Oil Fill CapsFor Honda 7 Acura engines. These Oil Fill Capslet you boast your loyalty to your favorite turboor all-motor racer. machined from billet 6061aluminum and heat treated, the caps are a 2-piece design with a set screw so the oil fill capcan be oriented in the proper direction.

4710 High-compression . . .$34.994711 Turbo . . . . . . . . . . . .$34.99

The hottest look this year! Popular stamped-steel CHEVROLET valve coversin the Black Crinkle finish paint! For Chevy SB V8, 1958-1986141-750 Short, w/baffle, black crinkle . . . . . . . . . . . . . . .$49.99141-751 Tall, w/baffle, black crinkle . . . . . . . . . . . . . . . . .$59.99

Stamped Valve CoversThese Chevrolet Bow Tie valve covers are madeof heavy gauge steel, 20% thicker than typicalaftermarket valve covers.

Die Cast Valve CoversPremium die-cast aluminum. Tall. Manufacturedto GM specs, equipped with internal oil drippersand baffles. For Chevy SB V8, 1958-86.141-116 Black Crinkle . . . . . . .$107.99

Center hold-down. Tall. Supplied with mounting bolts, stainless steel &rubber washers. For Chevy SB V8, 1987-later.141-131 Black Crinkle . . . . . . . . . . . . . . . . . . . . . . . .$139.99

Timing Chain CoverFor use on Chevrolet SB V8 1969-91 and V6/90°engines.141-753 Black Crinkle . . . . . . . . . . . .$20.99

Classic Black Crinkle Steel Air Cleaners141-752 14” Black Crinkle . . . . . . . . .$59.99

Air Breather CapsFor use in valve covers with grommets fitting 1.22”holes.141-754 Push-in, 3” dia., Black Crinkle .$10.99

Bow Tie Air Cleaner NutsThese chrome plated zinc die-cast air cleaners centernuts are offered in two popular styles, in both large

and small sizes. The large size is recommended for 14” and 10” aircleaner kits, and the small for 6 3/4” and 4 7/16” air cleaner kits. Theyfit both 1/4” -20 and 5/16” - 18 studs.

141-333 Bow Tie, Large . . . . . . . . . . . . . . . . . . . . . . . . .$9.99141-322 Bow Tie, Small . . . . . . . . . . . . . . . . . . . . . . . . .$8.99

Bow Tie Ignition Wire LoomsFits Chevrolet SB V8, 1959-86 and Chevrolet BB V8 1965-91. 4 wire looms, 2 per package.141-636 . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99

Harmonic Balancer CoversThese balancers are marked with the famous Bow Tielogo, Top Dead Center and the proper timing degrees. 141-727 6 3/4” Chevy SB, Black . . . . . .$25.99141-728 8” Chevy SB, Black . . . . . . . . .$25.99

Roll-Around Stool withPneumatic Seat• Pneumatic action adjusts seat to 20” height quickly andeasily • Convenient 15” diameter tool tray • Shielded 2-1/2” casters • Fully padded 12” diameter seat

W85008 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.99

40” 6 Caster Creeper withAdjustable Headrest• 40” x 17” x 4” creeper size • Lever action headrestadjusts to 3 positions • Powder coated, heavy duty,tubular steel frame • Shielded 2-1/2” swivel castersallow easy 360º movement • Fully padded deck withcushion headrest

W85005 . . . . . . . . . . . . . . . . . . . . . . . .$24.99

C Frame Creeper Seat• Heavy duty, tubular steel design for max-imum strength and minimum weight • Convenient 11-1/2” x 12-1/2” tooltray • Shielded 2-1/2” swivel casters allow easy 360º movement • Fully padded seat cushionW85007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99

Hold Down ClampsFits Chevrolet small-block V8 and V6 / 90° enginesthrough 1986. 4 per package. 141-757 Black Crinkle . . . . . . . . . . .$10.99

Chrome Oil Pans66162 Chevy Small Block Oil Pan '65-'79 $42.99(Also Fits '80-'84 with Driver-Side Dipstick) Note: Will Not Fit 302 HI-PERF

66132 Late Model Chevy Small Block '80-'84$46.99Engines with Passenger Side Dipstick

66611 Chevy Big Block Oil Pan 396-454 Chevy BigBlock Engines & Chassis, exept '62-'67 Chevy II, some Chevelles, Vegas and Monza . . . . . . . . . .$64.9966187 Ford Small Block Oil Pan 221, 260, 289, 302Ripple-Free Design for Show Cars . . . . . .$59.99

Performance Oil and TransmissionDipsticks with TubesChrome plated sticks and tubes.

Oil Dipsticks4957 Small Chevy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.994958 Big Chevy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.999221 Small Ford . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.999224 Small Chrysler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99

Transmission Dipsticks9421 Turbo 350, 27” long . . . . . . . . . . . . . . . . . . . . . . . . .$16.994995 Turbo 400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99


Dre

ss Up

65

Dress-Up KitsCarefully selected popular parts for the complete custom look. Available in packages for Chevy, Ford, Chrysler and Pontiac to suit your individual needs. Proform dress up kits contain factory-style oil restricting baffles in the valvecovers.

Chevy Small Block - up to 19792 Chrome Valve Covers, Short with Baffle1 Chrome Push-In Air Breather1 Chrome Dipstick with Tube1 Chrome Timing Chain Cover with Oil Seal1 Chrome Timing Tab1 Rubber Grommet for PCV1 Rubber Grommet for Air Breather66851 Left Handed Dipstick . . . .$44.99Chevy Small Block - up to 19792 Chrome Valve Covers, Short with Baffle1 Chrome Push-In Air Breather1 Chrome Dipstick with Tube8 Chrome Wing Bolts, 2Pc. Press-On8 Chrome Valve Cover Hold Down Plates1 Rubber Grommet for PCV1 Rubber Grommet for Air Breather66853 Left Handed Dipstick . . . .$49.99Chevy Big Block2 Chrome Valve Covers, Short with Baffle1 Chrome Push-In Air Breather1 Chrome Dipstick with Tube1 Chrome Timing Chain Cover with Oil Seal1 Chrome Timing Tab1 Rubber Grommet for PCV1 Rubber Grommet For Air Breather66855 . . . . . . . . . . . . . . . . . . . .$57.99

Chrysler Mopar 273-3602 Chrome Valve Covers with Baffle1 Chrome Super Air Breather1 Chrome Dipstick with Tube1 Rubber Grommet for PCV1 Rubber Grommet For Air Breather10 Valve Cover Alignable Wingnuts10 Valve Cover Hold-Down Washers66862 . . . . . . . . . . . . . . . . . . . .$57.99

Ford 289, 302, 351W2 Chrome Valve Covers with Baffle1 Chrome Push-In Air Breather1 Rubber Grommet for PCV1 Rubber Grommet For Air Breather2 Chrome Standard Wire Looms, 4-Wires2 Chrome Wire Dividers, 2-Wires12 Valve Cover Alignable Wingnuts12 Valve Cover Hold-Down Washers66863 . . . . . . . . . . . . . . . . . . . .$58.99

Pontiac 301-4552 Chrome Valve Covers with Baffle1 Super Air Breather8 Chrome Wing Bolts, Press-On8 Valve Cover Hold-Down Washers1 Chrome Dipstick with Tube1 Rubber Grommet for PCV1 Rubber Grommet For Air Breather66865 . . . . . . . . . . . . . . . . . . . .$74.99

Premium die-cast aluminum. Tall. Manufactured toGM specs, equipped with internal oil drippers andbaffles. For Chevy SB V8, 1958-86.141-108 Polished . . . . . . . . .$107.99141-117 Chrome . . . . . . . . . .$194.99

Flamed AluminumValve Covers6075 SB Chevy 58-86, 1 Hole in each Cover,

Short, Baffled . . . . . . . .$124.99

Deluxe Wire Divider SetDurable plastic prevents cross firing. For 7, 8, or 9mmplug wires. Each set includes two 4-hole, two 3-holeand two 2-hole dividers.9371 Yellow . . . . . . . . . . . . . . . . . . . . . . .$3.999372 Blue . . . . . . . . . . . . . . . . . . . . . . . . .$3.99

Elite Series AluminumValve CoversHeavy-gauge, die-cast aluminum valve coverscome with a handsome, polished finish for acustom look. The raised fins are accented by ablack matte background, then detailed withAllen hex heads that create a two-piece look

from a one-piece construction. The Tall Profile are 2" taller than stock and clearmost roller rockers and valve-train components. The Low Profile valve covers clearall air-conditioning, alternator brackets and aluminum rockers. Dimensions accu-rate within 1/8".

4248 Chevy 262-400 V8 1959 and later, low profile (3") . . . . .$69.994249 Chevy 262-400 V8 1959 and later, tall profile (4-5/8") . . .$69.994260 Ford 289/302/351W (not Boss) tall profile (4-1/4") . . . . .$73.99

Signature SeriesChrome Valve CoversMade for function and styled for good looks,triple chrome-plated signature series valve coverscarry the famous Edelbrock name. These qualityvalve covers accept all emissions equipment,including PVC valve. Rubber grommets for thebreather and the PVC valve holes are included.Note: The Tall Profile are 1-1/4" taller than stock,and clear most roller rockers and valve-train com-

ponents. Our Low Profile valve covers clear all air-conditioning, alternator brack-ets. Tall profile valve covers will not clear stud girdles. Signature Series valve cov-ers clear most aluminum rocker arms and moderate lift cams. Check clearanceprior to purchase.4431 AMC 290-304-343-360-390-401 V8 (no baffle) . . . . . . .$47.994449(1) Chevrolet 262-400 1959-86 (low profile) . . . . . . . . . . .$32.994649(1) Chevrolet 262-400 1959-86 (tall profile) . . . . . . . . . . .$34.994480 Chevrolet 396-454 1965 & later (low profile) . . . . . . . .$45.994680 Chevrolet 396-454 V8 1965 and later (tall profile) . . . .$45.994460(3) Ford 260-289-302 (not Boss) and 351-W V8 . . . . . . . .$39.994461 Ford 351M-400 and 351-C V8 . . . . . . . . . . . . . . . . . .$36.994463 Ford 429/460 V8 . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.994485 Oldsmobile 350-455 V8 . . . . . . . . . . . . . . . . . . . . . . .$41.994456(2) Pontiac 301-326-350-389-400-421-455 V8 1962 and later

(no baffle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.99(1) Will not fit '86 and later Vette aluminum heads or 1987 and later Chevy cast iron heads(2) Will not clear alternator on 1968 Firebird 400 (3) Will not fit '86 and later 5.0L engines with EFI

Wire Looms & Divider SetsColorful dividers and looms are the key to giving yourengine a professionally finished appearance. TDPerformance's wide selection includes BB Chevylooms and under header looms for a “from the factory” look.

9517 Linear type SB Chevy . . . . . . . . .$32.99

Center hold-down. Tall. Supplied with mountingbolts, stainless steel & rubber washers. For ChevySB V8, 1987-later.141-130 Polished . . . . . . . . .$139.99141-132 Chrome Plated . . . . .$199.99

S/B Chevy Die-Cast Valve Covers


Dre

ss U

p

66

Billet Aluminum Oil FillCapsThese push-in style caps are machined from 6061T6 billet aluminum then polished for great looks.The Edelbrock logo is laser-etched on the top.

4406 Dome-style piston, fits 1-1/4” holes . . . . . . . . . . .$41.994407 Flat top-style piston, fits 1-1/4” holes . . . . . . . . . .$44.99

4406 4407

Master Cylinder Covers

Chrome plated steel master cylinder covers replacestock steel covers and come complete with retainingbails.

9101 GM Steel, 3" x 5-5/8", Single Bail . . . . . . . . . . . . .$9.999102 GM Steel, 3" x 5-3/4", Dual Bail . . . . . . . . . . . . . .$9.99

Chrome O-Ring Water Necks9228 Chevy Early V8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.999229 Chevy Late V8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.999468 Chevy/GM Late V8 with 1/2" hole . . . . . . . . . . . . . . . . . . . .$11.999647 Chevy “Straight Up” design . . . . . . . . . . . . . . . . . . . . . . . . .$14.999440 Ford 360-289-302-351W 65-75 . . . . . . . . . . . . . . . . . . . . . .$11.999524 Ford 390-427-428 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.999415 Ford 429-460 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.999230 Pontiac V8 64-79 (not 389) . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99

Elite Series BreathersElite Series Breathers are die-cast aluminum with foam

element. Simply push into the oil fill hole. Push-in style,

top-mounting (2-1/2" tall)

4204 . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99

Oil Fill Hole PlugsOil plugs have recessed Edelbrocks script and aredesigned to plug the oil fill hole on any of Edelbrock’sSignature Series valve covers or any 1-1/4" diameter oilfill hole on similar designs.4415 Chrome Oil Fill Plug . . . . . . . . . . . .$5.99

Wing Bolts & Hold DownTabs for Valve Covers4401 2 pc. wingbolts (4-1/4" long) . . . . .$10.994402 1 pc. race wing bolts 5" long

(universal) . . . . . . . . . . . . . . . . . . .$11.994404 Hold-down tab kit (sb Chevy) . . . . . . .$8.994414 Hold-down tab kit (bb Chevy, 7 pcs.)$10.99

Wire Looms & DividersChrome plated steel looms and dividers are com-plete with rubber grommets. Looms are pack-aged two per set, wire dividers include twoeach of two, three and four wire configurationsto fit 7 & 8 mm wire.9751 4 wire loom set-short style . . .$6.99

Harmonic Balancer CoversSlippage of the etched outer ring of a harmonic balancer, in rela-tion to the inner mounting hub, is a common occurrence. Thiscover fixes the problem because it bolts through the inner hub,offers easy readability, eliminates flung-off timing tape, and lookslike a $200 balancer. Available for 6 3/4" and 8" balancers. 6 3/4" Harmonic Balancer CoverSmall Block Chevy Only141-727 Black w/bowtie (pictured) . . . . . . . . .$25.9966517BC Blue . . . . . . . . . . . . . . . . . . . . . . . . . .$24.9966517BKC Black . . . . . . . . . . . . . . . . . . . . . . . . .$24.9966517CC Chrome . . . . . . . . . . . . . . . . . . . . . . .$24.9966517RC Red . . . . . . . . . . . . . . . . . . . . . . . . . .$24.998" Harmonic Balancer CoverSmall Block Chevy Only141-728 Black w/bowtie (pictured) . . . . . . . . .$25.9966518BC Blue . . . . . . . . . . . . . . . . . . . . . . . . . .$24.9966518BKC Black . . . . . . . . . . . . . . . . . . . . . . . . .$24.9966518CC Chrome . . . . . . . . . . . . . . . . . . . . . . .$24.9966518RC Red . . . . . . . . . . . . . . . . . . . . . . . . . .$24.99

Chrome Timing Covers S/B Chevy

66150 $10.99B/B Chevy

66152 $15.99

Chrome Plated Pulley Sets (for Chevy small block)These new pulley sets are designed as matched sets to assurecorrect alignment of the drive belts. They are highly polishedthen chrome plated for lasting beauty. They are available in sin-gle, double and triple groove sets.

4962 69-85 w/long water pump, single up/double lower . . . . . . . . . . . . .$88.99

4963 69-85 w/long water pump, double up/triple lower . . . . . . . . . . . . .$88.99

Two-Piece Stamped Aluminum CoverThis new die-stamped two-piece front cover for small blockChevys is made from .090" aluminum for light weight andexcellent strength. This attractive and unique design allowsquick camshaft removal without dropping oil pan or breakingoil pan seal. Includes all necessary gaskets, bolts and seals.will not fit 1987 and later engines. Note: If cam button isdesired, a nylon cam button must be used.4242 Small Block Chevy . . . . . . . . . . . . . . .$72.99

Chrome Plated Timing Covers & TabsDress up the front of your engine with one of Mr.Gasket’s timing covers.Timing covers - complete kit4590 Chevrolet small block . . . . . . . . . . .$17.994591 Chevrolet big block . . . . . . . . . . . .$18.99Timing Tabs4592 Chevrolet small block - 7" Balancer . .$2.994593 Chevrolet small block - 8" Balancer . .$2.99

Valve Cover BreathersPush-on style valve cover breathers contain an effectivefilter which traps oil vapor and prevents engine compart-ment contamination. Fits any 1-1/4" diameter valve cover hole.4405 Round Breather . . . . . . . . . . . . . . . .$6.99

Hood & Deck Pinning KitsSecure hoods with a competition look. Kit permits quick removal of hood or deck. Twochromed safety pins, scuff plates and necessaryhardware are included in each kit. Overall pinlength is approximately 4" with 2-1/2" of threads.With screw-on scuff plates.1016 7/16"-20 thread-safety pins . . . .$9.99

Early Late


Dre

ss Up

67

Pro-Flo 1000 Series Reusable Air Cleaners

Offers superior flow capacity, low profile, good filtration,performance benefits and long-term savings. Pro-Flo1000 is an economical and effective way to keep cleanair feeding your engine without the expense of a newfilter every few thousand miles. Inside every EdelbrockPro-Flo 1000 Series, you’ll find our exclusive urethanefoam element. Simply wash with soapy water to main-tain filtration.

1003 V8 2bbl with 2-5/8" neck . . . . . . . . . . . . . . . . . . . . . . . . .$21.991002 V8 4bbl & 2/4bbl with 5-1/8" neck . . . . . . . . . . . . . . . . . .$16.991099 Replacement Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.99

Elite Series AluminumRound Air CleanersDesigned to match Elite Series valve covers and breathers,all Edelbrock Elite Series air cleaners have polished alu-minum finned tops with a black matte background. Note:#4207 is stock height and requires spacer #8092 withelectric choke carbs or banjo fitting #8089 with manualchoke carbs. #4221 fits all Edelbrock square-bore carbure-tors and Q-jets and is 3/8" taller than #4207.

4210 10" diameter with 2" element (3-13/16") . . . . . . . . . . . . . . . . .$52.994207 14" diameter with 3" element (3") . . . . . . . . . . . . . . . . . . . . . .$48.994221 14" diameter with 3" element, 3/8" deeper flange

for all Edelbrock carbs (3-7/16") . . . . . . . . . . . . . . . . . . . . . . .$57.99

Chrome Round Air CleanersTriple Chrome plated round air cleaners work with all popu-lar 5-1/8" diameter carbs. The 10" and 14" models haveknock-outs in the air cleaner base and include an adapterfor crankcase ventilation.1207 14" diameter with 3" element (3-5/16")$24.991221 14" diameter with 3" element, 3/8" deeper flangefor all Edelbrock carbs (3-3/4") . . . . . . . . . . . .$29.991208 10" diameter with 2" element (3-1/2") $17.99

Air Cleaner Spacers8092 3/4" . . . . . . . . . . . . . . . . . . . . . . . . . .$9.998093 1/2" . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99

Air Cleaner RisersTD Performance air cleaner risers raise your air clean-er to give more clearance for carb linkage changes oraftermarket performance modifications. Fits 5 1/8"neck.

2378 1/2" Tall air cleaner riser . . . . . . .$8.992379 1" Tall air cleaner riser . . . . . . . . .$8.992326 1-1/2" Tall air cleaner riser . . . . . .$8.992380 2" Tall air cleaner riser . . . . . . . . .$8.99

Elegante´ ModelMahogany wood grip and center cover, polishedaluminum spokes. 14" diameter, 3" dish includingstyling sleeve.

731 3 Spoke design . . . . . . . . .$147.99732 4 Spoke design . . . . . . . . .$154.99

ClassicFor that timeless “hi-performance” look. Thick foamcushion grip. Available in brilliant chrome or blackspokes. 334 Black 11-1/2" dia 3-3/4" dish . .$24.99834 Chrome 11-1/2" dia 3-3/4" dish$24.99338 Black 13-1/2" dia 3-1/2" dish .$24.99838 Chrome 13-1/2" dia 3-1/2" dish$24.99

F/X Splash! Wheels feature high density polyurethane grips in avariety of high gloss colors to accent the interior ofany super street car or truck. The formula 1 spokedesign is highly polished mirror finish aluminum.The anatomical grip is contoured to the shape ofthe hand for added comfort, control and drivingpleasure.

894 high gloss yellow grip . . . . .$99.99

Formula GTFeatures black anodized aluminum spokes andhand-stitched leather grained vinyl grips.710 Gray, 13" dia., 3" dish . . . . . $78.99773 Black, 13" dia., 3" dish . . . . $78.991770 Black, 15" dia., 3 1/2" dish .$89.99

ChallengerGrant’s patented exclusive dual-plane spoke design. This 3-dimen-

sional hi-tech, dual plane design offers a “world classlook.” The wheels have an extra thick textured foamcushion grip. Steel spokes 13 1/2" diameter, 3" dishin matte black, satin silver or brilliant chrome.414 4 Black spokes . . . . . . . . . . .$42.99415 4 Silver spokes . . . . . . . . . . .$42.99440 4 Chrome spokes . . . . . . . . .$45.99870 3 Black spokes . . . . . . . . . .$34.99

Billet Style Horn ButtonsFor any Grant Signature Series wheels with 5-boltcenter design

5870 Polished Billet . . . . . . . . . . . .$23.995871 Black finished billet . . . . . . . .$23.995875 Polished Billet/Ford Logo . . .$28.995876 Polished Billet/Bowtie . . . . . .$28.995876

732

1770

Elite GTThe Elite GT steering sheels feature highly polishedmirror finish aluminum spokes. The wheels are high-lighted by a machined billet aluminum trim ring. TheElite GT models feature a hand-stitched leather-grained vinyl grip and a matte black rubber stylingsleeve.1065 4 spoke . . . . . . . . . . . . . .$129.99739 3 spoke . . . . . . . . . . . . . .$109.99

Mahogany GTMahogany wood finger grip, silver anodized 3-spoke design.714 14" dia., 3" dish . . . . . . . . .$124.99

415

1065

Billet Install Kit5196-1Most GM Cars & Trucks . . . . .$38.995249-1Most Ford Cars & Trucks . . . .$39.99

5196-1

838

Air Cleaners• Triple chrome plated • 10” Air Cleaner, fits 5 1/8” neck• Open element style • Low restriction • Traditional look

120-145 Air Cleaner Assembly . . . . . . . .$22.99

Power Shot AssemblyHolley raises the level of air filtration performance to a newstandard. The Holley line of Power Shot air filters representthe second generation of Active Matrix Element filters. ThePower Shot filters deliver 5-12% more flow than the competition.• Easy True Fit Drop In Performance Upgrade. Fits like OE

• Sealing Bead Guarantees Air tight Seal and True Fit• Rounded Pleat Design Increases Filter Surface Area for More Flow• Re Oiled Active Matrix Cotton Gauze Filter Element Provides More Flow and TheHighest Filtration Rate On The Market!120-146 Chrome, Powershot Assembly 14” . . . . . . . . . . . . . .$49.99


Dre

ss U

p

68

Installation KitsThese kits are required when installing a Grant steering wheel.Each kit contains complete step by step instructions, a die casthub, grade 5 hardware, and matte black trim pieces.

Call with application, most kits . . . . . . . . . . . . . . . .$15.99

Corsa Gear Shift KnobsFeatures European racing style. The Corsa Knobs are availablein a wide variety of styles, Carbon Fiber design, Burlwood,Mahogany and hand-stitched leather. The knobs are designedto fit most vehicles with a floor mounted manual transmission.1301 Burlwood . . . . . . . . . . . . . . . . . . . . .$26.991302 Mahogany . . . . . . . . . . . . . . . . . . . .$26.991303 Carbon Fiber . . . . . . . . . . . . . . . . . . .$15.991304 Black Leather . . . . . . . . . . . . . . . . . . .$17.991305 Black/Red Leather . . . . . . . . . . . . . . .$17.99

1303

Chrome Plated Oil Dipstick/TubesDress up your engine with a chrome plated dipstick and tube fromMr. Gasket. Similar in design to stock, OEM units, only simple handtools are required for installation.6235 Chevrolet small block (block mounted) 65-79 . .$5.996920 Ford small block (260-302) 62-78 . . . . . . . . . .$9.996237 Chevrolet small block (passenger side) 80-82 . .$9.99

Automatic Transmission Dipstickswith TubesCompliment your engine compartment with one of thesebeautifully chrome plated dipsticks and tubes. Includes O-Ring.

9764 GM TH350 Dipstick w/tube 27" LONG . . . . . .$14.999691 GM TH350 Dipstick w/tube 34" LONG . . . . . .$16.99

Extra Deep Chrome SteelPans• Provides additional oil capacity• Increases cooling ability• No dipstick modification required• Fluid pickup extension and gasket provided20289 All TH-400 adds 2qt. . . . . . . . . . .$44.9930289 All TH-350 & 250 adds 3qt . . . . . . .$44.9970289* 82-93 TH-700R4/4L60 adds 3 qt . .$46.99

* Won't fit 2 wd pickup or Suburban. Won't fit electronic TH700R4 (4L60E)

TCI Trans PansDeep AluminumHelp your trans run cooler with these trans pans madeof aluminum to help dissipate heat.

528200 Power glide (2 extra qts). . . . . .$89.99378000 TH700R4 (2 extra qts) . . . . . . .$114.99

Low Profile, Hi-Capacity Oil PansDriver side dipstick. Precision welded and individu-ally pressure-tested before plating or painting. Theultimate quality in manufacturing engineering.

6-Qt Chevy Big Block66156 Oil Pan . . . . . . . . . . . . .$149.9966161 Oil Pick-up . . . . . . . . . . .$24.99

7-Qt Chevy Small Block66164 Oil Pan . . . . . . . . . . . . . .$99.9966160 Oil Pick-up . . . . . . . . . . .$24.99

Stock Replacement Oil PansThese oil pans are stock replacements for genericfactory oil pans and are perfect for restoration proj-ects. They’re also perfect for engines that are notintended for racing and just need a new stockstyle pan, that in many cases are no longer avail-able from the dealer. They feature excellent fit andflat unwarped pan rails, unlike most importedchrome stock replacement pans that don’t evencome close to fitting.

Chevy* Pan# Price Screen # PriceSB Chevy (1955-79)1 . . . . . . . .30700 . . .$79.99 . . .18600 . . . $9.99SB Chevy (1980-85)1 . . . . . . . .30701 . . .$83.99 . . .18600 . . . $9.99SB Chevy (1986-Up)1 . . . . . . . .30702 . . .$99.99 . . .18600 . . . $9.99BB Chevy (1964-90 Mk IV)1 . . .30710 . . .$99.99 . . .18610 . . $11.99* Rear sump, rear side drain

Ford*

289-302 Car (1965-74) . . . . . .30720 . . .$89.99 . . .18620 . . $13.99289-302 Truck (1965 & Up)2 . .30720 . . .$89.99 . . .18620 . . $13.99351W Car (1969-75) . . . . . . . .30730 . . .$97.99 . . .18630 . . $21.99351W Truck (1969-Up)2 . . . . . .30730 . . .$97.99 . . .18630 . . $21.99351C-400 Car (1970-79) . . . . .30735 . .$116.99 . . .18635 . . $21.99351C-400 Truck (1970-79)2 . . .30735 . .$116.99 . . .18635 . . $21.99390-428 Car (1958-71) . . . . . .30740 . . .$97.99 . . .18640 . . $25.99390-428 Truck (1958-Up)2 . . . .30740 . . .$97.99 . . .18640 . . $25.99429-460 Car (1968-78) . . . . . .30745 . . .$96.99 . . .18645 . . $21.99429-460 Truck (1968-Up)2 . . . .30745 . . .$96.99 . . .18645 . . $21.99* Front sump, side rear drain

SB Chrysler*273-340 Car (1960-72) . . . . . .30750 . . .$96.99 . . .18650 . . $24.99273-340 Truck (1960-72)2 . . . .30750 . . .$96.99 . . .18650 . . $24.99360 Car (1972 & Up) . . . . . . . .30755 . . .$96.99 . . .18650 . . $24.99360 Truck (1972 & Up)2 . . . . .30755 . . .$96.99 . . .18650 . . $24.99

BB Chrysler*383-440 Car . . . . . . . . . . . . . .30760 . .$104.99 . . .18660 . . $39.99383-440 Truck 2 . . . . . . . . . . .30760 . .$104.99 . . .18660 . . $39.99* Mid-sump, rear drain/3/8 Inlet on screen

Oldsmobile*

330-445 . . . . . . . . . . . . . . . . .30765 . .$117.99 . . .18665 . . $10.99* Rear sump, left front drain

Pontiac*

326-455 . . . . . . . . . . . . . . . . .30770 . .$117.99 . . .18670 . . $13.99* Rear sump, left mid drain

1=For Both Car and Truck Applications. 2=For 2-Wheel Drive Only

These new oil pans from Milodon are designed forperformance street, as well as drag strip applica-tions. Clears most stock chassis and steering, as list-ed and most headers. Low profiles give great oilsupply and maximum available ground clearance.A necessity where high volume oil pumps andincreased RPM ranges are used.

Small Block Chevy - 7 qt. capacity plus filter - 8 1/4” sump depth30900 Left hand dipstick 1955-79 . . . . . . . . . . . . . . . . . . . .$134.99

Milodon 18301 Pick-Up Screen Required

30902 Right hand dipstick 1986-Present . . . . . . . . . . . . . . . .$159.99Milodon 18314 Pick-Up Screen Required

Big Block Chevy - 7 qt. capacity plus filter - 8 1/2” sump depth30950 Mark IV Engine 1965-90 . . . . . . . . . . . . . . . . . . . . . .$189.99


Ford - 8 Qt. Capacity plus filter - 8 3/4” sump depth, 9” sumplength, 11” sump width30926 351W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$189.99


Call to verify your application with salesperson

Low Profile Street & Strip Oil Pans for Chevy & Ford

Ultra-ShiftLight13,000 RPM, Amber LEDs,gray body. Includes mountingscrews, night cover andinstructions.

•Up to 13,000 RPM & 1-6 PPR • Stand-aloneunit - or use with our tach or yours • PeakRPM recall, adjustable in 10 RPM increments

•No plug-in modules required - microprocessordriven - program via two buttons on back

•Super-bright LEDs, fast-responding withadvanced directional lighting patterns

•Three levels of brightness or use night cover •Display for shift-alert, tach and peak recall•Built-in tach displays real-time RPM - you can

turn display on or off if required • Rugged alu-minum tube - tough, compact & lightweight

• Clean design - fasteners only at rear of unit • Sealed front, dust-proof & easy to clean

Gauges

69order online! northernautoparts.com

Memory Tachs w/Shift-Light• Advance SMT electronic-easy-to-program

(using control module)• Peak RPM recall-compare tune-to-run RPMs!• Works with 1-6 pulses per revolution• Horizontal and vertical graphic formats• Maximum dial viewing area/angles• Three popular styles–Silver, White & Black• Integrated LED shift light–highly visible, fast

responding-in dial for 3 3/8” unit• Rugged, good-looking case, dual in-dash/on-

dash mounting• 5” units control module recessed below bezel

for added protection • Front-sealed tach & control module

5” & 3 3/8” Memory Tachs with Shift-Lightscover 2-, 4-, 6-, 8-, 10-, & 12- cylinder applica-tions (does not include shift light, does include lamp, in dash andpedestal mounting hardware, red and greenlight boots and instructions)

5” Memory Tachs w/Shift Light11,000 RPM - Vertical scale114013 Silver $218.99114014 White $218.99114012 Black $218.99

10,000 RPM - Horizontal scale114019 Silver $218.99114020 White $218.99114018 Black $218.99

9,000 RPM - Vertical scale114016 Silver $218.99114017 White $218.99114015 Black $218.99

3 3/8” Memory Tachs w/Shift Light10,000 RPM - Vertical scale114110 Silver $236.99114111 White $236.99114109 Black $236.99


StandardTachs• Advance SMT electronic-wide range of calibrations &easy-to-program (via remotemount control module)• Advanced lighting-engi-neered light pipes (backlight-ing & perimeter lighting)• Robust, styled pointers withbetter lighting scheme

• Maximum dial viewing area and angles.• Streamlines case designs - tough & good-looking• Sealed Front

114906 $115.99

5” Standard Tachs10,000 RPM - Vertical scale114001 Silver $143.99114002 White $143.99114000 Black $143.99




3 3/8” Standard Tachs10,000 RPM - Vertical scale114101 Silver $124.99114102 White $124.99114100 Black $124.99



3-3/8” SpeedometersSpeedo programming via push-button accessory; set-up formeasured-mile with dual odo (totalizing & trip). Large LCD dis-play for speedo with two tripodometers. (Includes lamp, in-dash mountinghardware, red and green lightboots and instructions)

Speed Sensor Required. Call with yor application.

120 MPH LCD114701 $206.99114702 $206.99114700 $206.99160 MPH LCD114704 $206.99114705 $206.99114703 $206.99200 MPH LCD114707 $206.99114708 $206.99114706 $206.99

5” High-PerformanceTach’s

Professional racing tach with memory. 11,000 RPM. Recalls highest RPM. Large, easy-to-readdial. For all 4-6-8 cylinder engines.Includes mounting bracket.67002C . . . . . . . . . .$81.99

Professional racing tach with shiftlight and memory. 11,000 RPM.High intensity yellow shift light.Easy-to-adjust shift light setting.Recalls highest RPM. Large, easy-to-read dial. For all 4-6-8 cylinder

engines. Includes mounting bracket. Touch-padcontrols.67003C . . . . . . . . . . . . . . . . . . . . . .$99.99

This NEW, slim design, 5 inch,11,000 RPM Tachometer recalls thehighest RPM, has an internal shiftlight, and comes in the clamshellpackaging.

67004C . . . . . . . . . . . . . . . . . . . . . .$99.99

Adjustable RPM Shift LightsThe ultimate in affordable performance! Simply dial-in your shift point and go! No external modules required.67005C Black 3-11,000 RPM . . . .$49.9967005SC Silver 3-12,000 RPM . . . .$49.9967005BC Blue 3-12,000 RPM . . . .$49.9967005RC Red 3-12,000 RPM . . . . .$49.99

Check Out OurWebsite for the

Full Line of Stewart WarnerPerformance!

Pods • Mounting Kits• Senders • Switches

• Fittings

Gauges

70

Mechanical Gauges•Custom Engineered for high-performance applica-tions • Robust mechanical gauge movements withheavy-duty Bourbon tubes, silicone dampened •High-torque gauge movement for faster response &reliability • Front sealed & protected from moisture,dust & corrosion • Advanced lighting & bold, easy-to-read graphics • Custom engineered, ultra-bright,balanced pointer • Maximum dial viewing area •Superior performance value•High-quality, made in the U.S.A.Installation kit includes lamp with red & greenboots, mounting hardware and instructions.Senders & adapters included where applicable.Mechanical gauges have a full sweep needle

Electric Gauges• Custom Engineered for high-performance appli-cations • High-torque gauge movement for fasterresponse & reliability • Front sealed & protectedfrom moisture, dust & corrosion • Advanced light-ing & bold, easy-to-read graphics • Custom engi-neered, ultra-bright, balanced pointer • Maximumdial viewing area • Superior performance value• High-quality, made in the U.S.A.Installation kit includes lamp with red & greenboots, mounting hardware and instructions.Senders & adapters included where applicable.Electrical gauges have a half sweep needle

2 5/8” Electrical and Mechanical Gauges

Oil Pressure100 PSI - Electrical114258 Silver $61.99114259 White $61.99114257 Black $61.99

0-100 PSI - Mechanical114522 Silver $47.99114523 White $47.99114521 Black $47.99

Oil Temperature140-320°F - Electrical114270 Silver $53.99114271 White $53.99114269 Black $53.99

140-320° - Mechanical114570 Silver $69.99114571 White $69.99114569 Black $69.99

140-320° - Mechanical114576 Silver (12’ cap) $70.99114577 White(12’ cap) $70.99114575 Black (12’ cap) $70.99

Vac/Boost Pressure15- PSI - Mechanical114540 Silver $54.99114541 White $54.99114539 Black $54.99

40- PSI - Mechanical114546 Silver $55.99114547 White $55.99114545 Black $55.99

Boost Pressure60- PSI - Mechanical114528 Silver $47.99114529 White $47.99114527 Black $47.99

Blower Pressure0-100 PSI - Mechanical114534 Silver $47.99114535 White $47.99114533 Black $47.99

Air Pressure150- PSI - Mechanical114552 Silver $47.99114553 White $47.99114551 Black $47.99

Voltmeter8-18V, for 12V - Electrical114204 Silver $45.99114205 White $45.99114203 Black $45.99

Water Temperature100-260° - Electrical114276 Silver $51.99114277 White $51.99114275 Black $51.99

100-260° - Mechanical114558 Silver (6’ cap) $66.99114559 White (6’ cap)$66.99114557 Black (6’ cap) $66.99

100-260° - Mechanical114564 Silver (12’ cap) $66.99114565 White (12’ cap)$66.99114563 Black (12’ cap) $66.99

Trans Temperature140-320° - Electrical114288 Silver $53.99114289 White $53.99114287 Black $53.99


Air/Fuel/Ratio20- LED - Electrical114904 Silver $64.99114905 White $64.99114903 Black $64.99

Water Pressure0-15 PSI - Mechanical114588 Silver $45.99114589 White $45.99114587 Black $45.99


Mechanical Gauges• Custom Engineered for high-performance applica-tions • Robust mechanical gauge movements withheavy-duty Bourbon tubes, silicone dampened.• High-torque gauge movement for faster response& reliability • Front sealed & protected from mois-ture, dust & corrosion • Advanced lighting & bold,easy to-read graphics • Custom engineered, ultra-bright, balanced pointer • Maximum dial viewingarea • Superior performance value • High-quality,made in the U.S.A.Installation kit includes lamp with red & greenboots, mounting hardware and instructions.Senders & adapters included where applicable.Mechanical gauges have a full sweep needle

Electric Gauges• Custom Engineered for high-performance applica-tions • High-torque gauge movement for fasterresponse & reliability • Front sealed & protectedfrom moisture, dust & corrosion • Advanced light-ing & bold, easy to-read graphics • Custom engi-neered, ultra-bright, balanced pointer • Maximumdial viewing area • Superior performance value• High-quality, made in the U.S.A.Installation kit includes lamp with red & greenboots, mounting hardware and instructions.Senders & adapters included where applicable.Electrical gauges have a half sweep needle

2” Electrical andMechanical Gauges

Oil Pressure100 PSI - Electrical114255 Silver $59.99114256 White $59.99114254 Black $59.99


Oil Temperature140-320°F - Electrical114267 Silver $45.99114268 White $45.99114266 Black $45.99

140-320° - Mechanical114567 Silver(6’ cap) $66.99114568 White(6’ cap)$66.99114566 Black(6’ cap) $66.99

140-320° - Mechanical114573 Silver (12’ cap) $67.99114574 White(12’ cap) $67.99114572 Black (12’ cap) $67.99

Vac/Boost Pressure30 Hg Vacuum/15- PSI - Mechanical114537 Silver $50.99114538 White $50.99114536 Black $50.99

30 Hg Vacuum/15- PSI - Mechanical114543 Silver $50.99114544 White $50.99114542 Black $50.99

Boost Pressure0-60- PSI - Mechanical114525 Silver $45.99114526 White $45.99114524 Black $45.99

Blower Pressure0-100 PSI - Mechanical114531 Silver $46.99114532 White $46.99114530 Black $46.99

Air Pressure150- PSI - Mechanical114549 Silver $45.99114550 White $45.99114548 Black $45.99

Water Pressure0-15 PSI - Mechanical114585 Silver $44.99114586 White $44.99114584 Black $44.99


Voltmeter8-18V, for 12V - Electrical114201 Silver $37.99114202 White $37.99114200 Black $37.99

Air/Fuel Ratio20-LED - Electrical114901 Silver $58.99114902 White $58.99114900 Black $58.99

Trans Temperature140-320° - Electrical114285 Silver $45.99114286 White $45.99114284 Black $45.99


Water Temperature100-260°F - Electrical114273 Silver $37.99114274 White $37.99114272 Black $37.99

100-260°F - Mechanical114555 Silver(6’ cap) $64.99114556 White(6’ cap) $64.99114554 Black(6’ cap) $64.99

100-260°F - Mechanical114561 Silver (12’ cap) $71.99114562 White(12’ cap) $71.99114560 Black (12’ cap) $71.99

Fuel Pressure &Fuel Level Gauges

Also Available!

See Our Website For

Your Application!

northernautoparts.com

Fuel Pressure &Fuel Level Gauges

Also Available!

See Our Website For

Your Application!


Gauges

71order online! northernautoparts.com

3 3/4" TachometersThese American made tachometers are a favorite amongstreet performance enthusiasts. Their distinctive styling andengine RPM accuracy make them a perfect addition to anyvehicle interior. In traditional chrome or modern black. Whenthe sun goes down, the through dial illumination and litpointer provide excellent nighttime legibility, a red line shiftmarker slides to any preferred position as a helpful reminderto prevent engine over-revving. The mounting base is special-ly designed for easy installation and adjust for differentheights.2300 8000 RPM Black . . . . . . . . . . . . .$49.992301 8000 RPM Chrome . . . . . . . . . . .$53.99

3 3/4" White FaceTachometersAuto Meter now offers these tachometers with a white dialface and black pointer for the street performance enthusiast inthe popular auto gage series. They include a rugged air coremeter movement for maximum accuracy and quick response.A red line shift marker slides to any preferred position to serveas a helpful reminder to prevent engine over revving. 2304 8000 RPM Chrome . . . . . . . . . . . .$69.99

3 3/4"Tachometers

Auto gage Shift-Lite tachometers optimize driving performanceon the street or at the track. The critical shift point is dialed inwith an adjustment knob on the backside of the tach. Whenthe engine revs to the preselected RPM, The shift-lite illuminates. 2309 8000 RPM w/External Shift-Lite .$112.992302 8000 RPM (not pictured) . . . . . . . .$79.99

5" TachometersDrivers in various forms of motorsports utilize theseSport-Comp tachometers to achieve maximum horse-power when critical shifting is a priority. Anadvanced air core meter movement provides accura-cy and quick response on the popular 5" Monsterface. Sport-Comp tachometers include the exclusiverubber lined shock strap protects against severe vibra-tions. A bright amber shift-lite signals any pre-selectedRPM to notify the driver to shift.

3904 10,000 RPM Shift-Lite . . . . . . . . . . . . . . . . . .$159.993906 10,000 RPM Shift-Lite Memory Tach. . . . . . . . .$229.99

2 1/16" Mechanical Gauge ConsolesWhen economical price and accuracy are most important, these short sweepmechanical gauges provide the answer. These mechanical gauges include contoured steel mounting panels along with red and green light bulb covers for custom look.2345 Black Two-Guage Console (Oil /Water) . . . . . . . . . . . . .$29.992346 Black Two-Guage Console (Oil /Amp) . . . . . . . . . . . . . .$23.992347 Black Three-Guage Console (Oil /Water/Amp) . . . . . . . .$40.992348 Black Three-Guage Console (Oil /Water/Volt) . . . . . . . . .$43.992349 Chrome Three-Guage Console (Oil /Water/Volt) . . . . . . .$40.99

5" Sport-Comp SilverTachometerThe 3911 Sport-Comp “Silver” tachometer with Shift-Lite includes Auto Meter’s Dial-In Exactness. The fea-ture actually utilizes the tachometer’s fluorescent redpointer to indicate the chosen shift RPM. By depress-ing the ”Push to Display“ button the shift point RPMis indicated by the tach pointer. Then, by turningthe ”Shift-Set“ knob, the pointer sweeps up or downuntil the preferred RPM is selected.3911 10,000 RPM Silver Shift-Lite . . .$199.99

2 5/8" Mechanical Gauge The trademarked competition appearance and rugged,reliable performance of Sport-Comp gauges are nowavailable in the smaller 2-5/8" size. The smaller size gauges are perfect whenspace is limited but accuracy is still a must.3421 Oil Pressure 0-100 PSI . . . . . . . . . . .$36.993431 Water Temp 140°-280°F . . . . . . . . .$51.99

Battery ExtenderDesigned to maximize the life of a serviceable 12volt lead acid battery. This means a vehicle batterywill not give the annual dead battery surprise whenremoved from storage. The Battery Extender chargesat a 1 amp rate until the battery is fully charged. Toprevent over charging, it then changes to a variblecurrent maintanace mode.9201 12 volt battery maintainer . . . . . .$59.999202 12 & 16 volt battery maintainer .$74.99

10,000 RPM with 5" Monster Race (pictured)233904 . . . . . . . . . . . . . . . . . $99.99Shift-Lite on the shield233903 . . . . . . . . . . . . . . . . . $99.998,000 RPM with external Shift-Lite233905 . . . . . . . . . . . . . . . . . $99.99

5” Memory TachsPro-Comp Memory Tachometers include a rugged aircore meter movement for superior monitoring accuracy.Various models are available for different racing ignitionsin both Monster and Standard sizes. They include peakRPM Memory Recall, some utilizing a remote mountedswitch. This allows teams to review the highest RPM tohelp select the optimum gear ratios. Operates on stan-dard/electronic racing ignitions, such as MSD

6809 9,000 RPM Tachometer. . .$184.996811 11,000 RPM Tachometer. .$184.99

2 1/16" Electrical GaugesTemperature gauges include sender, 3/8" and 1/2" NPT fittings. Oil pressure gauge includes sender, 1/8" and 1/4" NPT fittings.3337 Water Temperature, 100°-250° F . . . . . . . . . . . . . . .$39.993347 Oil Temperature, 100°-250° F . . . . . . . . . . . . . . . . . .$39.993357 Transmission Temperature, 100°-250° F . . . . . . . . . . .$39.993336 Cylinder Head Temperature, 140°-340° F . . . . . . . . .$39.993327 Oil Pressure, 0-100 psi . . . . . . . . . . . . . . . . . . . . . . .$51.993309 Fuel Pressure, 0-100 psi . . . . . . . . . . . . . . . . . . . . . .$69.993391 Voltmeter, 8-18 volts . . . . . . . . . . . . . . . . . . . . . . . .$34.993314 Fuel Level, most GM after 1965 . . . . . . . . . . . . . . . .$32.993317 Fuel Level, most pre - 1965 GM . . . . . . . . . . . . . . . .$32.993315 Fuel Level, Ford & Chrysler . . . . . . . . . . . . . . . . . . . .$32.993316 Fuel Level, requires ATM-3262 sender . . . . . . . . . . . .$32.993262 Sender for ATM-3316, 240 ohm empty/33ohm full . .$31.99

2 1/16" Mechanical GaugesTemperature gauges include 1/2"NPT Fitting and capillary tubing. Oil andboost pressure gauges includes 6 ft. nylon tubing, 1/8" and 1/4" NPT fittings.3331 Water Temperature, 140°-280° F . . . . . . . . . . . . . . . .$55.993332 Water Temperature, 120°-240° F . . . . . . . . . . . . . . . .$55.993321 Oil Pressure, 0-100 psi . . . . . . . . . . . . . . . . . . . . . . . .$35.993301 Boost/Vacuum Pressure, 30 in. Hg./20psi . . . . . . . . . .$43.993313 Fuel Pressure w/isolator for inside mounting, 0-15 psi $105.993384 Vacuum, 30 in. Hg. w/6 ft. tubins and T-fitting . . . . . .$39.99

2 1/16" Mechanical GaugesTemperature gauges include 1/2" NPT Fitting and capillary tubing. Oilpressure gauge includes 6 ft. nylon tubing, 1/8" and 1/4" NPT fittings.4331 Water Temperature, 140°-280° F . . . . . . . . . . . . . . .$55.994332 Water Temperature, 120°-240° F . . . . . . . . . . . . . . .$58.994321 Oil Pressure, 0-100 psi . . . . . . . . . . . . . . . . . . . . . . .$38.994301 Boost/Vacuum Pressure, 30 in. Hg./20psi . . . . . . . . .$45.99

2 1/16" PodAuto Meter Gauge Works now offers a vari-ety of mounting options. These pods pro-vide easy viewing of the gauges, factoryinstalled appearance, and are customdesigned for each model.

GAUGE PODS10100 79-93 Dual Pod/Mustang . . . . . . . . . . . .$24.9910101 79-93 Single Pod/Mustang . . . . . . . . . . .$19.9910120 94-01 Dual Pod/Mustang . . . . . . . . . . . .$24.9910121 94-01 Single Pod/Mustang . . . . . . . . . . .$19.9915300 87-97 Dual Pod/F-150/350 . . . . . . . . . . .$24.9915301 87-97 Single Pod/F-Series . . . . . . . . . . . .$19.9915303 98-99 Dual/F-150/250/Expedtn . . . . . . .$24.9915306 99-01 Dual Pod/Super Duty . . . . . . . . . .$28.9915307 99-01 Single Pod/Super Duty . . . . . . . . .$19.9910200 82-92 Dual Pod/Camarao/Frbrd . . . . . . .$24.9910201 82-92 Single Pod/Camara/Frdbrd . . . . . .$19.9910210 93-98 Dual Pod/Camaro/Frdrd . . . . . . . .$24.9910211 93-98 Single Pod/Camaro/Frbrd . . . . . . .$19.9910183 68-72 Dual Pod/GM A-Body . . . . . . . . . .$24.9910184 68-72 Single Pod/GM A-Body . . . . . . . . .$19.9915100 88-94 Dual Pod/Chevy Full Size . . . . . . . .$24.9915101 88-98 Single Pod/Chevy Full Size . . . . . . .$19.9915103 95-98 Dual Pod/Chevy Full Size . . . . . . . .$24.9915200 94-97 Dual Pod Ram . . . . . . . . . . . . . . .$24.9915201 94-97 Single Pod/Ram . . . . . . . . . . . . . .$19.9915203 98-00 Dual Pod/Ram . . . . . . . . . . . . . . .$24.9915204 98-00 Single Pod/Ram . . . . . . . . . . . . . .$19.9915206 97-00 Dual Pod/Durango . . . . . . . . . . . .$24.9915207 97-00 Single Pod/Dak/Durango . . . . . . .$19.9920400 88-91 Dual Pod/Civic/CRX . . . . . . . . . . .$24.9920401 88-91 Single Pod/Civic/CRX . . . . . . . . . .$19.99

FULL PILLAR17303 92-97 Triple Pillar/F-Series . . . . . . . . . . .$52.9917306 99-01 Dual Pillar/Super Duty . . . . . . . . .$49.9917307 99-01 Triple Pillar/Super Duty . . . . . . . .$52.9917201 94-97 Triple Pillar/Ram . . . . . . . . . . . . .$52.9917202 98-01 Dual Pillar/Ram . . . . . . . . . . . . . .$49.9917203 98-01 Triple Pillar/Ram . . . . . . . . . . . . . .$52.9917204 98-01 Dual Pillar/Ram . . . . . . . . . . . . . .$52.9917205 98-01 Triple Pillar/Ram . . . . . . . . . . . . .$52.9917104 00-01 Dual Pillar/Chevy Full Size . . . . . .$49.9917105 00-01 Triple Pillar/Chevy Full Size . . . . . .$52.99

STEERING COLUMN POD15004 97-01 Steering Clmn. F-150 aut. . . . . . . .$44.9915005 97-01 Steering Clmn F-150 man. . . . . . . .$52.9915010 99-01 Steering Clmn Super Duty aut. . . .$52.9915011 99-01 Steering Clmn. Super Duty man. . .$52.9915007 00-01 Steering Clmn. Chevy aut. . . . . . . .$52.9915008 00-01 Steering Clmn. Chevy man. . . . . . .$52.9915012 94-01 Steering Clmn. Ram . . . . . . . . . . .$52.99

INSTRUMENT CLUSTER BEZEL

15003 99-01 Inst. Cl. Super Duty . . . . . . . . . . . .$64.9910003 94-00 Inst Cl. Bezel/Mustang . . . . . . . . .$59.9920010 96-00 Inst Cl. Bezel/Civic . . . . . . . . . . . . .$69.9920011 96-00 Inst Cl. Bezel/Integra . . . . . . . . . . .$69.9920012 95-99 Inst Cl. Bezel/Eclipse . . . . . . . . . . .$69.99

2 5/8" Available

2 5/8" AvailableBrushed Aluminum Face

2 1/16" Electrical GaugesTemperature gauges include sender, 3/8" and 1/2" NPT fittings. Oil pressure gauge includes sender, 1/8" and 1/4" NPT fittings.4337 Water Temperature, 100°-250° F . . . . . . . . . . . . . . .$39.994357 Transmission Temperature, 100°-250° F . . . . . . . . . .$42.994327 Oil Pressure, 0-100psi . . . . . . . . . . . . . . . . . . . . . . .$53.994391 Voltmeter, 8-18 volts . . . . . . . . . . . . . . . . . . . . . . . .$35.994314 Fuel level, most GM after 1965 . . . . . . . . . . . . . . . .$35.994315 Fuel level, Ford & Chrysler . . . . . . . . . . . . . . . . . . . .$35.99


Gauges

72


Pain

t & C

hem

ical

73

“Hi-Temp” Engine EnamelAll colors have excellent durability,great heat and solvent resistance.

SP121 Bright Red $4.49SP123 Chevy Orange $4.49SP124 Gloss Black $4.49SP125 Ford Dark Blue $4.49SP127 Universal Aluminum $4.49SP128 Gloss Yellow $4.49SP129 Gloss White $4.49SP130 Flat Black $4.49SP132 Universal Gold $4.49SP133 Chevy V8 Blue $4.49SP135 GM Blue $4.49SP137 Ford Gray $4.49SP138 New Ford Blue $4.49SP139 GM Satin Black $4.49

Classic “Hi-Temp”EnamelAll colors have excellent durability,great heat and solvent resistance.

SP120 Chrysler Hemi-Orange$4.49SP122 Pontiac Blue $4.49SP126 Early Chrysler Blue $4.49SP131 Ford Green $4.49SP134 Ford Light Blue $4.49SP136 Late Chrysler Blue $4.49SP186 Chevy Rally Silver $4.49

“Nu-Cast” Cast IronCoatingsIdeal for your engine and accessoriessuch as water pumps, heads andbrackets. NuCast can withstand up to500°F.

SP997 Iron Engine Coat $4.49SP998 Manifold (1500°) $6.49SP995 Alum. (500°) $4.99SP999 Night Shade $6.49

Epoxy All WeatherPaintEpoxy finishes are extremely hard and

durable and are ideal for use in high

traffic areas or where a long lasting

scuff and scratch resistant surface is

required.

SP652 Satin Black $4.69

100 Amp Mini AlternatorGM internal regulator. Available for about 1/2 the cost of competitive models,these reliable internal-fan units are compact and powerful, use existing mount-ing brackets and electrical hook-up.66438 100 Amp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.9966439 Chrome 100 Amp . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.99

1-Wire AlternatorProform 1-wire alternator are assembled with all new com-ponents (except rotor), and then they are individually test-ed. The GM style 1-wire hook-up makes for easy installation.

66904 70 Amp Satin . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.9966445.6 60 Amp Chrome. . . . . . . . . . . . . . . . . . . . . . . . .$79.9966445.8 80 Amp Chrome. . . . . . . . . . . . . . . . . . . . . . . . .$84.9966445.10 100 Amp Chrome. . . . . . . . . . . . . . . . . . . . . . . .$95.9966445.14 140 Amp Chrome. . . . . . . . . . . . . . . . . . . . . . .$129.99

100% NEW Starters for Chevy S/B & B/B100% NEW, no rebuilt components, 4.41:1 gear reductioncapable of cranking engines up to a whopping 18:1 compression!67050 168-tooth flywheel . . . . . . . . . . . . . .$139.9967051 153-tooth flywheel . . . . . . . . . . . . . .$139.9967052 168-tooth flywheel/staggered mount $139.99

Enforcer HighPerformance Starter• Has permanent magnet technology• 10 to 1 compression • 1.4 hp • 6 to 1 gearreduction ratio • 10 lb/ft torque at 300 amps •For automatic or manual transmission • 153 or

168 components • 12 clocking positions for solenoid • 100% new compo-nents - sourced globally from only Hitachi qualified suppliers • Specificallydesigned for NASCAR to maximize light weight and sizePSL100 Chevy - V8 S/B Block, V6 AT & MT with 153 or 168

tooth ring gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.99PSL101 Ford - V8, 221-351 SB w/AT . . . . . . . . . . . . . . . . . . .$169.99PSL102 Ford - V8, 221-351 SB w/MT . . . . . . . . . . . . . . . . . . .$173.99PSL103 Ford - V8, 429 Boss-460 BB (late model) w/ MT or AT .$172.99PSL104 Ford - V8, 4.6L/ 5.4 & V10, 6.8L . . . . . . . . . . . . . . . .$166.99

NNNNEEEEWWWW!!!!

“Quick-Coat” Acrylic EnamelProvides extra hide and durabilityfor interior or exterior applications.SP501 Fire Red $4.39SP503 Bright Orange $4.39SP504 Gloss Black $4.39SP505 Ocean Blue $4.39SP507 Bright Aluminum $4.39SP508 Bright Yellow $4.39SP509 Gloss White $4.39SP510 Flat Black $4.39SP511 Flat White $4.39SP512 Forest Green $4.39SP513 Machinery Gray $4.39SP519 Dark Blue $4.39SP515 Clear $4.39SP525 Silver Chrome $4.39SP526 Dark Brown $4.39

Poly-Wheel PaintAssures long-lasting protection andeye-appeal while protecting thesurface from oxidation.SP186 Chevy Rally Silver $4.59SP221 Military Green $4.39

“Prime Coat” Sandable PrimerA sandable primer, filler and surfac-er for use on metal, fiberglass andwood surfaces.SP301 White $4.49SP302 Dark Gray $4.49SP303 Red Oxide $4.49SP304 Light Gray $4.49SP305 Black $4.49

“Flameproof” CoatWill renew and extend the life of

your exhaust system. Flameproof

coat can withstand up to 1500°F.

SP101 Flat White $4.99SP102 Flat Black $4.99SP114 Flat Orange $4.99SP117 Flat Aluminum $4.99

Vinyl DyeVHT Color dye is not paint, but a

true dye that permanetly changes

or restores the orginal color.

SP941 Gloss Jet Black $4.99SP954 Char Gray Satin $4.99

Switches & Terminals9066 Remote starter switch . . . . . . . . . .$14.994988 Battery cut-out switch . . . . . . . . . .$39.999065 Remote battery jumper terminal . .$47.99

9066

90654988

*Your free paint must be the most inexpensive.

Buy 4 Get 2 FREE!

Buy 4 Get 2 FREE!

Mix & Match*


Ch

ass

is,

Bra

kes

& S

teeri

ng

74

Transmission MountsDefinitely one of the most popular Energycomponents for years. These re-engineeredperformance polyurethane mounts haveled the industry and are in demand, both

on the track and on the street. Several have a safety interlock and are patenteddesigns. Impervious to undercar fluids.Specify your color of R - red or G - black by adding R or G to theend of the part #

5-1101 Chrysler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.993-1108 GM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$20.994-1104 Ford . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99

Bushing Master SetsEnergy Suspension introduces theHyper-Flex System PerformancePolyurethane Bushing Master Sets forthe most popular car and truck models, both import and domestic.Now, with just one part number youcan replace all of the major suspensionbushing components with Hyper-Flex performance polyurethane.

Specify your color of R - red or G - black by adding R or G to theend of the part #GM Passenger Car3-18110 1978-87 Regal/Grand National, Cutlass, 1978-88 Chevelle,

Monte Carlo, El Camino, 1982-88 Grand Prix 1978-81 Grand Am . . . . . . . . . . . . . . . . . . . . . . .$159.99

3-18111 1974-77 Century, Regal, Chevelle/El Camino, Cutlass/442, GTO/LeMans . . . . . . . . . . . . . . . . . . . . . . . . . . .$169.99

3-18112 1967-72 Century, Skylark, Cutlass, GTO/LeMans . .$175.993-18113 1968-72 Chevelle . . . . . . . . . . . . . . . . . . . . . . . .$231.993-18115 1982-92 Camaro/Firebird . . . . . . . . . . . . . . . . . . .$117.993-18114 1993-99 Camaro/Firebird-V8 . . . . . . . . . . . . . . . .$165.993-18116 1975-79 Camaro, 1974-75 Firebird . . . . . . . . . . . .$169.993-18117 1976-79 Firebird, 1975-79 Nova . . . . . . . . . . . . .$159.993-18119 1967-69 Camaro/Firebird w/mono leaf springs,

1968-74 Nova w/mono leaf springs. . . . . . . . . . .$159.993-18118 1967-69 Camaro/Firebird w/multi leaf springs . . . .$169.993-18120 1980-90 Caprice/Impala . . . . . . . . . . . . . . . . . . .$164.993-18123 1964-82 Corvette . . . . . . . . . . . . . . . . . . . . . . . .$164.99

Ford Mustang

4-18111 1967-73 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$76.994-18110 1985-93, with transmission mount . . . . . . . . . . . .$189.99

Chrysler Passenger Car

5-18104 1966-76 Dart/Duster/Valiant, Barracuda to 1969 .$121.995-18105 1970-74 Barracuda/Challenger, 1965-72 Charger, Coronet,

GTX, Roadrunner . . . . . . . . . . . . . . . . . . . . . . . .$115.99• Please verify application before ordering •

Bump StopsPerformance polyurethane bump stops are madefor control arms, traction bars, axles and leafsprings. Cushions a collapsing suspension, pre-venting expensive damage.Specify your color of R - red or G - black

by adding R or G to the end of the part #

9-9101 . . . . . . . .2 1/8" Tall . . . . . . . . . . . . . . . . . . . . . .$8.999-9102 . . . . . . . . 1 1/16" Tall . . . . . . . . . . . . . . . . . . . .$8.999-9103 . . . . . . . .1 9/16" Tall . . . . . . . . . . . . . . . . . . . . .$8.99

Greaseable Sway Bar BushingsThese new performance polyurethane sway bar bushings are completewith zerk fittings and utilize a unique channel design that allows grease toflow to all inner bushing surfaces. This innovative design will virtually elim-inate any possible squeaking.Specify your color of R - red or G - black by adding R or G tothe end of the part #

9-5155 . .11/16" . . . . . . . . .$13.999-5156 . .3/4" . . . . . . . . . . .$13.999-5157 . .13/16" . . . . . . . . .$13.999-5158 . .7/8" . . . . . . . . . . .$13.999-5160 . .15/16" . . . . . . . . .$13.999-5161 . .1" . . . . . . . . . . . . .$13.999-5162 . .1 1/16" . . . . . . . . .$13.999-5164 . .1 1/8" . . . . . . . . . .$13.999-5165 . .1 1/4" . . . . . . . . . .$13.99

Replace those worn rubber mounts withEnergy’s polyurethane suspension mountkits. Kit includes two motor mounts andone tranny mount.Specify your color of R - red or G -black by adding R or G to the endof the part #

4-1124 84-95 Mustang 5.0 $149.99

Sway Bar End LinksReplace worn or broken pieces with these bulletproofunits. You get a pair of 3/8" grade-5 bolts surroundedby heavy duty zinc plated sleeves and washers, per-formance polyurethane grommets and nylon insertnuts. Measure length of OEM spacer sleeve to orderthe correct length.

9-8117G 2 5/8" . . . . . . . . . . . . . . . . .$13.999-8118G 2 7/8" . . . . . . . . . . . . . . . .$13.999-8119G 3 3/8" . . . . . . . . . . . . . . . . .$13.999-8120G 1 5/8" . . . . . . . . . . . . . . . . .$13.999-8121G 4 1/2" . . . . . . . . . . . . . . . . .$13.99

Performance Motor & Transmission Mount Sets

Picture does not reflect contents of all kits.

Many GM applications available. Call for part # and price.

Body MountBushingsReplace to restore ride heightas well as gain durability.Stronger than original rubbermounts that are so soft they

crack, distort and crush so badly they often fall off. Aluminum ones aretoo harsh, causing other parts to break. Energy’s specially formulatedpolyurethane body mounts combine the best qualities of both.Specify your color of R - red or G - black by adding R or Gto the end of the part #3-4142 67-81 Camaro w/hdwre. . . . . . . . . . . . . . . .$69.99

Chevy Motor MountsPerformance polyurethane motor mounts —gives bothperformance gains and longevity. These babies will han-dle any and all torque. Specify your color of R - red or G - black byadding R or G to the end of the part #3-1114 Zinc . . . . . . . . . . . . . . . . . .$33.99 ea.3-1115 Chrome . . . . . . . . . . . . . . .$46.99 ea.Many applications available

Energy Suspension CatalogSee all of what Energy Suspension has to offer. 72 pages ofPolyurethane Components.

17001 Catalog . . . . . . . . . . . . . . . . . . . .$5.00


Ch

assis, B

rakes &

Steerin

g

75

Brake Bleeder Wrenches10900 5/16"-3/8" . . . . . . . . . . .$4.9910950 1/4”-3/8” . . . . . . . . . . . .$4.99

Disc Brake Pad SpreaderFor installing pads on most domestic and import cars and light trucks24400 . . . . . . . . . . . . . . . . . . . . . . .$6.99

One-Man Brake BleederSimple to use, no messy clean-up

19200 . . . . . . . . . . . . . . . . . . . . . . .$5.99

Brake Star WheelAdjuster48250 . . . . . . . . . . . . . . . . . . . . . . .$5.99

Brake Spring PliersDouble ended tool for removing and installing brake springs

11260 . . . . . . . . . . . . . . . . . . . . . . . .$15.99

FWD Spindle Hub Bearing AssembliesThese bearing and hub assembles fit manyother applications. Call with yours.

BuickPTC513087 94-96 Century, Lesabre, Park Ave, Riviera . . . .$109.99ChevroletPTC513011K 80-85 Citation, 82-89 Celebrity (9.68" Rotor) .$49.99PTC513016K 93-90 Celebrity (10.25" Rotor) . . . . . . . . . . . .$59.99PTC513017K 85-98 Beretta, Cavalier, Corsica . . . . . . . . . . $52.99PTC513018 90-96 Lumina, Monte Carlo (rear) (Exc. ABS) . $89.99ChryslerPTC513075 89-93 Imperial, New Yorker . . . . . . . . . . . . . . .$59.99PTC518500 82-83 Lebaron, New Yorker . . . . . . . . . . . . . . .$52.99PTC518502 84-88 All (5 stud hub) . . . . . . . . . . . . . . . . . . .$52.99FordPTC518503 84-90 Escort, EXP and Tempo . . . . . . . . . . . . .$54.99

PTC Is Your Price Competitive Line of Hub Bearing Assemblies!

Bendix CT-3Ceramic PadsCT-3‚S brake pads have the optimum combination of ceramic technologyblended with organic friction to virtually eliminate dust and noise with anunmatched stopping power.The CT-3 features a five-layer noise damping system with the noise insula-tors that are thermally bonded. The pads surface has angled chamfers toimprove the contact profileWith the New Bendix CT-3‚S you get smooth braking with fade resistantperformance PLUS with the CT-3S you have virtually eliminated brake noiseand with ultra low dusting, you can now stop spending countlesshours trying to clean those filthy wheels

D369CT 88-02 fits most K1500 . . . . . . . . . . . . . .$69.99D52CT 76-85 fits most GM's . . . . . . . . . . . . . .$59.99D199CT 84-86 most Mustang . . . . . . . . . . . . . . .$54.99D679CT 99-02 2wd F150 . . . . . . . . . . . . . . . . .$64.99D465ACT 99-02 Honda Civic . . . . . . . . . . . . . . . .$43.99D484CT 99-01 Non/Turbo Mits Eclipse . . . . . . . .$54.99

Cargo Control Rear Coil SpringsCC501 Chevy Malibu 4DR SDN 67-70 . . . . . . . . . . . .$43.99CC853 Ford Escort 4cyl 91-96 . . . . . . . . . . . . . . . . .$44.99CC853 Mazda Protégé 91-96 . . . . . . . . . . . . . . . . . .$44.99CC869 Mercury Tracer 97-99 4DR . . . . . . . . . . . . . .$43.99CC627 Oldsmobile 8CYL 84-87 . . . . . . . . . . . . . . . . .$43.99

Check application before ordering. Many other applications Available

“Comfort Range” Tightly spacedcoils provide the smooth ride expect-ed from a constant rate spring.

“Load Range” Widely spaced coilsprovide the Cargo load carrying char-acteristics, which minimize defectionand maintain level chassis height andproper alignment when loaded.

Constant Rate Front Coil SpringHeat treated steel, returns your vehicle to O.E. ride height. Plus heattreating ensure‚s full rebound, and resist future sagging A vehicle can notbe properly aligned if sagging springs put your ride height out of specifica-tion5396 Cadillac Fleetwood RWD 8cyl w/ac,auto 93-96 . . .$79.995606 Chevrolet Camaro 1992 . . . . . . . . . . . . . . . . . . . .$49.996312 Chevy II 350 W/AC Auto 1973 and

Pontiac Firebird 6 Cyl W/O AC 2 Dr Hardtop . . . . .$49.99CC858 Ford Taurus 88-91 4cyl all . . . . . . . . . . . . . . . . . . .$42.998606 Ford Thunderbird 86-87 8cyl 5.0 hd . . . . . . . . . . .$55.995660 1982-95 Chevrolet S10, Front . . . . . . . . . . . . . . .$38.99

Coil Spring Compressor• For use on most automotive and light truck

applications•Chrome moly steel jawsW89311 . . . .$29.99


Ch

ass

is,

Bra

kes

& S

teeri

ng

76

We Also Carry Brake Hoses -Call for Application & Price

Many Applications Available!

Front RotorsPRT1067 Ford F150 73-83 2wd . . . . . . . . . . . . . . . . . . . .$29.99PRT1088 Chevrolet 1/2 ton 4wd 71-86 . . . . . . . . . . . . . . .$20.99PRT1201 Chevrolet Caprice, Impala 80-89 . . . . . . . . . . . . .$26.99PRT1263 Buick Electra, Park Ave Fwd 85-90 . . . . . . . . . . . .$10.99PRT1379 Chrysler Fifth Ave, Newport 90-93 . . . . . . . . . . . .$10.99

Domestic Racks Price Core53-6400 82-92 Century, Ciera, 82-85 Skylark, Citation, 82-90 Celebrity, 82-84 Omega

(3.2 turns lock to lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99 $55.0053-6429 86-91 Cadillac Deville, Eldorado, Seville, 86-92 Buick Electra, Olds 98 Regency, Delta 88 $58.99 $110.0053-6432 86-95 Aerostar all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$58.99 $165.0053-6448 87-96 Beretta ,Corsica, 87-94 Cavalier (2.8 turns lock to lock) . . . . . . . . . . . . .$58.99 $110.0053-6406 80-84 Mustang, Cougar, T-Bird, 81-94 Granada . . . . . . . . . . . . . . . . . . . . . . .$58.99 $110.0053-6409 82-86 Skyhawk, Sunbird, Firenza, 85-86 Somerset, Calais, Grand Am (3 turns lock to lock)$58.99 $110.0053-6467 88-91 Pontiac Bonneville SE, SSE and LE with Firm Ride Suspension . . . . . . . . . . . . . .$109.99 $165.0053-6474 93-99 Ford Escort, EXP and Mercury Tracer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99 $110.0053-6449 95-96 Beretta, Corsica, Skylark, Grand AM and Achieva without Variable Assist . . . . . . . .$69.99 $110.00

Steering Gears Price Core

51-6530 80-88 Malibu, El Camino w/4 bolt housing cover $110.99 $40.00

51-7516 80-95 Ford F100 thru F350 all $140.99 $206.8051-7505 70-79 F100 thur F350 2WD $120.99 $100.00

Import RacksPrice Core

53-8157 85-88 Maxima, 86-89 Stanza $147.99 $165.00

53-8356 86-89 Accord $147.99 $137.5053-8351 82-85 Accord $149.99 $137.5053-8152 82-12/83 Nissan

Pulsar and Sentra$159.99 $137.50

• Lifetime Warranty • The #1 Name in Power Steering Components • Complete Coverage of Racks, Gears, andPumps

Power Steering Pumps Price Core

50-7050 78-89 F-Series Trucks, Bronco, 83-89 Ranger $49.99 $16.5050-7064 80-87 Most Chevy Pick-ups $49.99 $16.5050-6105 80-90 Omni, Charger, 84-93 Daytona, 82-95 LeBaron,

82-93 New Yorker $55.99 NCV50-6383 90-95 Mustang, Taurus, T-Bird $59.99 $16.5050-6359 90-94 Lumina 3.1, 87-90 Celebrity V6, 88-93 Ciera 3.1 $64.99 $33.0050-5113 87-94 Toyota Camry 2.0 $79.99 $44.00

Manual RacksPrice Core

53-6811 81-90 Escort, Lynx$111.99 $55.0053-6816 74-80 Pinto, Bobcat,

74-78 Mustang $149.99 $165.0053-6812 79-81 Mustang $149.99 $82.50

Rear Wheel CylindersLeftside RightsidePWC3004 /PWC3005 Buick Lesabre 60-70 . . . . . . . . . . . .$8.99 eaPWC3469 /PWC3469 Chevrolet Caprice, Impala, 71-89 11" x 2" $8.99 eaPWC3597 /PWC3597 Dodge 1/2 ton 2wd 69-93 . . . . . .$8.99 eaPWC3600 /PWC3601 Ford Galaxie, LTD 60-72 . . . . . . . . .$8.99 eaPWC3818 /PWC3818 Toyota Corolla . . . . . . . . . . . . . . . .$8.99 ea

Brake Pads (Non Metallic)PD52S Fits most GM (check application) . . . . . . . . . . . .$8.99PD50 Fits most Ford (check application) . . . . . . . . . . .$8.99

Brake Pads (Semi Metallic)PMD52S Fits most GM . . . . . . . . . . . . . . . . . . . . . $11.99PMD50 Fits most Ford . . . . . . . . . . . . . . . . . . . . $11.99

Rear DrumsPDR0479 Ford F150 76-83 . . . . . . . . . . . . . . . . . . . . . . . .$23.99PDR0315 Chevrolet 1/2 ton 4wd 76-86 . . . . . . . . . . . . . . .$33.99PDR0454 Chevrolet Caprice 9.5" x 2" 77-89 . . . . . . . . . . . .$19.99PDR0451 Buick Electra, Fwd 85-90 . . . . . . . . . . . . . . . . . .$19.99PDR0490 Dodge 1/2 ton 4wd 86-93 . . . . . . . . . . . . . . . .$29.99

Loaded Calipers by Re-TechIntroducing the nations best quality lowest priced calipers.These calipers come with New Pads and 100% New Seals andBleeder Screws And are 100% Vacuum Tested for leaks O.E. fitfor Domestic and Foreign applications.

ExchangeFront Left Right PriceCadillac Deville 85-89

CL4195 CL4194 $26.99 ea.

Chevy Tahoe gas Ex police 98-99CL4300 CL4299 $26.99 ea.

Chrysler New Yorker 94-96CL4384 CL4385 $32.99 ea.

Dodge Ram 2500 2wd 97-99CL4298 CL4297 $35.99 ea.

Ford F150 4x4 97-99CL4635 CL4634 $46.99 ea.

Ford Mustang 68-73CL4070A CL4069A $24.99 ea.

Oldsmobile Cutlass 73-76CL4060 CL4059 $23.99 ea.

REARBuick Regal 88-93 w/o casting lever stop

CL4328 CL4327 $59.99 ea.

Shop 24/7


PRICESLOWERED20%


Ch

assis, B

rakes &

Steerin

g

77

TREAD SAVER by Let Us Build a Chassis Kit for Your Vehicle!These are just a few examples of the kits that can be built by your sales person.

Add on ball joints and bushings and receive similar savings.

Chevrolet 78-88 Chevelle, Malibu, El Camino, Monte Carlo

1-Outer End ATSES2077R $15.66 each1-Outer End ATSES2078L $15.49 each1-RH Inner Drag Link ATSDS1138 $43.90 each1-LH Inner Drag Link ATSDS1017 $24.75 each1-Adj. Sleeve ATSES2079S (RH) $15.86 each1-Adj. Sleeve ATSES2080S (LH) $15.81 each

Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$131.47

Ball Joint Kit2-ATSK8388 Upper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.78 each2-ATSK8195 Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.92 each

Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$65.40

Ford F150 4x4 from 5-85 to 1994

1-Idler Arm ATSK6187 $14.02 each1-Center Link ATSDS1047 $26.27 each2-Adj. Sleeve ATSES2032S $4.99 each2-Outer Ends ATSES2033RL $10.78 each2-Inner Ends ATSE2034RL $10.70 each

Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.65

Ball Joint Kit2-ATSK5208 Upper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.79 each2-ATSK6145 Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.79 eachTotal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.16

Chevrolet 82-95 S-10 2WD

1-Passenger Side Outer ATSES62L $22.03 each1-Passenger Drag Link DS911* $41.97 each1-Driver Side Outer ATSES140R $20.16 each1-Driver Side Inner ATSES140R $20.16 each1-Adj. Sleeves 4.50" ATSES2004S $6.26 each1-Adj. Sleeves 40.12" DS924S* $61.84 each

Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$172.42

Ball Joint Kit2-ATSK8194 Upper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.06 each2-ATSK8195 Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.92 each

Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.96

* Moog Part

Jeep 74-83 CJ5-CJ8 4X4

2-Outer Ends ATSES409R $10.88 each2-Inner Ends ATSES409L $10.64 each1-Idler Arm ATSK6096 $12.46 each2-Adj. Sleeves ATSES2004S $6.26 each

Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68.02

Ball Joint Kit2-ATSK6136 Upper . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.55 each2-ATSK6117 Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.81 eachTotal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.72

Chevrolet 73-82 1/2 Ton Truck 2WD

2-Outer Ends ATSES2019RL $10.83 each2-Inner Ends ATSES2020RL $10.53 each1-Center Link ATSDS899 $32.64 each2-Adj. Sleeves ATSES2004S $6.26 each1-Idler Arm ATSK6187 $14.02 each

Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$101.90

Ball Joint Kit2-ATSK5208 Upper . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.79 each2-ATSK6145 Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.79 each

Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.16

2-Outer Ends ATSES441RL $9.81 each1-Inner Ends ATSES442L $13.66 each1-Inner Ends ATSES443L $13.92 each1-Center Link ATSDS829 $46.16 each1-Idler Arm ATSK6186 $14.96 each2-Adj. Sleeves ATSES2004S $6.26 each

Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$114.58

Ball Joint Kit2-ATSK5208 Upper . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.79 each2-ATSK6145 Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.79 each

Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.16

1-Passenger Side Outer ATSES2234R (7/8" thread) Jobber $15.86 each1-Driver Side Outer ATSES2233L (7/8" thread) Jobber $13.86 each1-Front Drag Link End ATSES2027L Jobber $16.03 each1-Rear Drag Link End ATSES2026R Jobber $18.98 each1- Drag Link Sleeve ATSES362S Jobber $5.98 eachJobber Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$70.73

Ball Joint Kit (press in style only)2-ATSK8194 Upper . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.06 each2-ATSK8195 Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.92 each

Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.96

Chevrolet 75-81 Camaro, Berlinetta,Z28 (V8 Only)

Chevrolet 81-91 K10, V10 (Except 4.10 Axle) 4WD

Chevrolet 78-96 Caprice

2-Outer Ends ATSES2033RL $10.70 each2-Inner Ends ATSES2034RL $10.18 each1-Center Link ATSDS909 $33.89 each1-Idler Arm ATSK6187 $14.02 each2-Adj. Sleeves ATSES2032S $4.99 each

Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.65

Ball Joint Kit2-ATSK5208 Upper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.79 each2-ATSK6145 Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.79 each

Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.16

NO GIMMICS, NO GAMESWE’VE LOWERED PRICES 20%


Exh

aust

& H

ose

s

78

“Bad Boy” MufflersThe Terminator is constructedentirely of super thick, fully-weldedaluminized steel, with huge 3"inner pass tubes that reduce backpressure and increase horsepowerlike no other muffler can. No glassto burn or blow out, designed toflow in either direction, huge 5" x11" x 15" case.Starting at ...$57.99

Sound Engineered MufflersAll Afterburners are made with analuminized case for miles and milesof rust and corrosion protection.Their fully-welded constructionoffers stronger seams to preventblow out under extreme conditions.Huge flow tubes provide blisteringhorsepower, while the sound tuned

chambers provide unbelievable sound with no annoying resonance.And, Afterburner mufflers are fully reversible, designed for maximumflow in either direction. Starting at ......................................................$42.99

Standard Finish HeadersEach header is formed from speciallyselected .049 cold roll flash con-trolled tubing, and features flowtechsexclusive thick, mandrel-formedPower Plenum collector. Completew/mounting hardware and gaskets. Starting at .$89.99

“Turbo Chamber” HeadersIncreases both horsepower andtorque, primary collector formedfrom 304 stainless steel, large 3" sec-ondary collector, patented velocitytube design to increase scavengingand smooth exhaust pulses, premiumhigh temperature electrostatic grayfinish. For Chevy only.Starting at ....$149.99

Turbo MufflersFlowtech's new Raptor TurboPerformance Muffler features aunique sound rib case design andaluminized, lock seal construction.It offers gigantic, high-output flowtubes to provide more horsepower,better mileage, and a sound ofpure performance!

50050FLT 2" in/out....................................$20.9950051FLT 2.25" ........................................$20.9950052FLT 2.5" ..........................................$20.99

Shorty Smog Headers (for trucks only)

All Shorty Smog Headers bolt onquickly and easily to the factory Y-Pipe, retaining all stock emissionsequipment, and offering maximumhorsepower gains plus increased efficiency!Starting at ....$199.99

ExhaustInsulating Wrap• Reduces under hood tempera-tures up to 70%

• Increases horsepower and fuel efficiency. • Withstands continuous heat up to 2000° F.• Increases the life of engine and electronic system com-ponents. • Two required for V811002 2" x 1/16" x 50' . . . . . . . . . . . . . $36.99

Hi-Heat CoatingProtects exhaust insulating wrap for abrasion and harmfulspills. Simply spray on wrap after it has been installed.Withstands temperature up to 1200° F.12001 Black 11 oz. . . . . . . . . . . . . . . . . . . . . .$7.9912002 Aluminum 11 oz. . . . . . . . . . . . . . . . . .$7.99

Snap StrapHigh temperature stainless steel fastener used to secureexhaust insulating wrap. Snap Strap can be used to securevirtually anything. Snap Strap is easy to use and less expen-sive than hose clamps. 20' strap & 20 clips13001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.99

Thermo-ShieldThermo-Shield is a combination of materials laminated together to provide a barrier for under hood componentsagainst the extreme heat released by an exhaust system.Thermo-Shield aluminized adhesive backed tape is great forwrapping the hoses and wires you don't want to remove. It

can also be wrapped around odd shaped components for lasting heat protection.Wrap it around a fuel line and say good-bye to vapor lock. Reflects radiant heatup to 2000° F. 14002 1 1/2" x 15' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99

Cool-It Insulating MatFrom Thermo-Tec is a combination of heat andsound control technologies. The foil reflects theheat way from surfaces or areas which need tobe kept cool or protected form heat damage.The mylar is oriented to the heat source when alower heat tolerance is required. Installation is

easy. A weather striping adhesive can be used for low heat applications. Push-inplastic fasteners are supplied for long-lasting applications in higher heat situations. 14100 24" x 48" . . . . . . . . . . . .$27.99

Starter Heat ShieldDeveloped to eliminate starter problems causedby close proximity of the exhaust to the starter.The universal kit enables the user to insulate the

starter and solenoid. The unique construction of the aluminized material providesprotection by reflection of up to 90% of radiant heat. 14150 7" x 22" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99

Adhesive Backed Heat Barrier™Adhesive backed heat barrier protects parts and componentsfrom radiant heat. It can be used in applications to protectpainted surfaces, plastic parts or any component from thedamaging effects of radiant heat. 13500 12" x 12" . . . . . . . . . . . . . . . . . . . . . .$11.9913575 12" x 24" . . . . . . . . . . . . . . . . . . . . . .$18.99

Standard Primary Design Exhaust HeddersAll part numbers fit standard and automatic transmission vehicles,with or without air conditioning and power steering. Primary tubediameter is 1-1/2" with a 2" collector to fit stock exhaust system. Kitscome complete with all hardware and gaskets.36010 1990-91Integra 1.8L . . . . . . . . . . . . .$129.9937010 1984-87 CRX CIVIC SI Only 1.5L . . . . .$129.9937020 1988-91 CRX CIVIC 1.5L-1.6L . . . . . . .$129.9937030 1992-95 CIVIC SI 1.5L-1.6L . . . . . . . .$129.99More Applications

Available! HTCCeramic -Metalic

Coating Available!


Exh

aust &

Hose

s

79

LIFETIMEGUARANTEE!

Real-Seal 3-Hole Header Collector SealsThe Collector Gaskets constructed of “Dead Soft” aluminum that conforms tosealing imperfections better than any conventional gasket.10024FLT 2 1/2" Collector . . . . . . . . . .$13.9910025FLT 3" Collector . . . . . . . . . .$13.9910026FLT 3 1/2" Collector . . . . . . . . . . .$13.99

11025HKR Reducer Collector: 2-1/2'' Tailpipe: 2'' . . . . . . .$23.9911030HKR Reducer Collector: 3'' Tailpipe: 2-1/8'' . . . . . . . .$23.9911032HKR Reducer Collector: 3'' Tailpipe: 3'' . . . . . . . . . . .$23.9911035HKR Reducer Collector: 3-1/2'' Tailpipe: 2-1/2'' . . . . .$23.9911040HKR Reducer Collector: 3'' Tailpipe: 2-1/2'' . . . . . . . .$23.99

21501HKR SC Unv Chambered 2.2521502HKR SC Unv Chambered 2.521505HKR SC Unv Chambered 3.0

21506HKR SC Unv Chambered 3.0

21504HKR SC Unv Chambered 2.5

EliteBuilt specifically for extremely “hard use“ conditions, Elite headers feature extra thick 3/8"flanges and heavy wall 14 gauge primary tubes.They also come with thermal coating for long life.Great for ”off road“ conditions and high heat situations like on motor homes.68278 SB Camaro/Nova 68-81 1-5/8 . . . . . . . . . . . . . .$289.9968608 SB Early Camaro/Chevelle shorty . . . . . . . . . . . .$269.9968298 SB Chevy Pass/Chevelle 71-88 . . . . . . . . . . . . . .$269.99

More Applications Available,Call if your’s Isn’t Listed!

HTCThe Best High Temp Coating on the Market Today! • Thermal Protection up to 1300°• Won‘t chip or peel • More Durable thanchrome • Won‘t blue or discolor • Easy to clean• Better heat insulation • Guaranteed Againstexternal Rust-Through69096 SB Chevy Pickup 2 Wheel Drive . . . . . . . . . . . .$299.9968276 SB Camaro/Nova 68-81 1-5/8 . . . . . . . . . . . . . .$299.9968606 SB Camaro/Chevelle shorty . . . . . . . . . . . . . . . .$299.99

Exhaust Cut Outs• Get the best of both worlds • Convert from street legal to “ready to race” in seconds • Easy to install• Guaranteed not to leak • Lower E.T.‘s and improve miles per hour.16225 2 1/4" Diameter Easy Open Exhaust Cut Out . . .$59.99 pr16250 2 1/2" Diameter Easy Open Exhaust Cut Out . . .$64.99 pr16300 3" Diameter Easy Open Exhaust Cut Out . . . . . .$64.99 pr16350 3 1/2" Diameter Easy Open Exhaust Cut Out . . .$69.99 pr

Turbo MufflersFollowing the Hedman tradition, all Hedman Turbo Mufflers are made from the finest quality materials. Our special features are:• Galvanized, double wrapped muffler casing for maximum rust protection • Spot welded, louvered baffles to eliminatevibration • Spun end caps for gas tight seal • Reverse flow so that mufflercan be inverted • Hedman turbos “Fit Right In” • 14” casePart# Inlet Size Outlet Size Price

25560 2" 2" $22.9925570 2 1/4" 2 1/4" $22.9925580 2 1/2" 2 1/2" $22.99

Red Hots!May be the best muffler value on the markettoday. The classic design includes thick, long lasting high temperature Cerama-Glass packing wrapped around a power louver baffle. Backpressure isdecreased to increased horsepower • Delivers a Rich, Powerful, Red Hot Sound• Free Flowing Design Decreases Backpressure • Increases Horsepower andTorque • Large 3 1/2" Diameter Heavy Gauge CaseP/N In/Out Case Overall Price50250FLT 2" 18" 24" $15.9950251FLT 2 1/4" 18" 24" $15.9950252FLT 2 1/2" 18" 24" $15.99

Hooker HeadersHooker Competition Headers are madefrom 16 gauge material; it's 30% heavierbut it welds easier and will last slightlylonger under certain extreme climatic conditions. Competition headers arefinished with a heat cured, high heat resistant, black paint.2451HKR Chevy . . . . . . . . . . . . . . . .$139.992455HKR Chevy . . . . . . . . . . . . . . . .$139.992453HKR Chevy . . . . . . . . . . . . . . . .$149.992452HKR Chevy . . . . . . . . . . . . . . . .$149.996901HKR Ford . . . . . . . . . . . . . . . . . .$141.99

Hooker MufflersThe Aero Chamber Muffler produces adeep throaty powerful sound that willnot change with time. The Hooker AeroChamber uses a unique step principal,similar to that which is currently popular in racing header design. The aerody-namically designed chambers flow 23° better and produce more horsepowerand torque than the most popular high performance brand. . . .$57.99

Turbo Hedder Muffler14" CasePart# Inlet Flange Inlet Size Outlet Size Price

25660 3" 3-Bolt 2 1/4" 2 1/4" $32.99

Street• Durable materials • Computerized Precision • Handcrafted Quality

69090 SB Chevy Pickup 2&4 wd . . . . . . . . . . . . . . . .$118.9969520 SB V8 S-10 Swap shorty 2 wd . . . . . . . . . . . . .$124.9968270 SB Camaro/Nova 68-81 1-5/8 . . . . . . . . . . . . .$118.9969110 BB Chevy Pickup 2&4 wd . . . . . . . . . . . . . . . .$118.9968470 SB Camaro/Firebird 82-92 . . . . . . . . . . . . . . . .$118.9989270 351W Ford Pickup 82-88 . . . . . . . . . . . . . . . .$142.9989100 352-427 Ford F150 65-76 . . . . . . . . . . . . . . .$142.9988360 5.0 Thunderbird 82-88 . . . . . . . . . . . . . . . . .$118.99

Exhaust Header SealsReal-Seal header gaskets are a revolutionary break through inexhaust sealing technology. Real-Seals provide a do-it-oncesolution that won't burn or blow out. 99150FLT SB Chevy 1.5" Round . . . . . .$29.9999150AFLT SB Chevy 1.5" Square . . . . . .$29.9999153FLT BB Chevy1.875" Round . . . .$29.9999253FLT SB Ford 1.5" Square . . . . . .$29.9999253RFLT SB Ford 1.5"x1.125" Oval . .$29.99

Header Reducers

Standard Black Thermoid Goodyear1/2” x 50’ 1725 $14.99 65000 $19.995/8” x 50’ 1726 $16.99 65004 $24.993/4” x 50’ 1727 $19.99 65009 $29.991” x 50’ 1728 $28.99 65012 $39.99

Premium Red Thermoid Goodyear(SAE 20R3 D2)1/2” x 50’ 1835 $16.99 65020 $22.995/8” x 50’ 1836 $18.99 65023 $22.993/4” x 50’ 1837 $21.99 65026 $27.99

Fuel Line/EvaporativeFuel Line Hoses are designed for conveying most modern fuels in autos

and trucks, and meet required specs. SAE 30R7 features a nitrite tube

with a CSM cover to withstand oil, grease, abrasion and ozone.

Temperature range is -29º to +257ºF.

Thermoid Goodyear3/16” x 25’ on spools 25048 $8.99 65125 $10.991/4” x 25’ on spools 25060 $9.99 65126 $10.995/16” x 25’ on spools 25078 $9.99 65127 $11.993/8” x 25’ on spools 25088 $10.99 65128 $11.997/16” x 25’ on spools 25106 $12.99 65129 $15.99

Windshield Washer/Vacuum TubingWindshield Washer Hoses have a low pressure tubing for windshieldwasher and vacuum accessories. Will not deteriorate from heat, weath-ering or ozone.

Thermoid Goodyear5/32” 50’ spool (3/16” nipple) 334050 $7.99 65111 $9.997/32” 50’ spool (1/4” nipple) 334150 $7.99 65112 $11.997/64” 50’ spool (1/8” nipple) 333950 $6.99 65113 $8.999/32” 50’ spool (5/16” nipple) 334250 $9.99 65114 $14.99

Service Station Air HoseThermoid Air Hoses are designed for tough applications. Kink resistantand flexible in extreme temperatures. Features brass fittings and a 300

lb. working pressure.Thermoid

1/4” x 25’ with coupling 522-25 $11.993/8” x 25’ with coupling 538-25 $14.991/4” x 50’ with coupling 522-50 $20.993/8” x 50’ with coupling 538-50 $24.99

Heater Hoses are designed to withstand the super-high heat conditions found in today’s autos. Plus it's weather and abrasion resistant to provide trouble freeservice and long life. Available in two grades, Standard Black and Premium Red.

$2.90 per box of 10

Breeze® Hose ClampsPart# Size Range3504B (mini) 7/32”-5/8”

3506B (mini) 7/16”-25/32”

62006B 7/16”-25/32”

62008B 1/2”-29/32”

Exh

aust

& H

ose

s

80

Aluminum Door PortsADF30 (3") . . . . . . . . . . . . . . .$19.99

Service Station Exhaust Kits• 2-4' x 2-1/2" hose• 2-4' x 3" hose• 1-6' x 2-1/2" hose• 1-6' x 3" hose• 1-RY25 • 1-RY30• 2-F250 • 2-F300• 1-SP25* • 1-SP30*

DSS25 2 1/2" DSS30 3" (Fits 2" Pipe) (Fits 2 1/2" Pipe)$89.99 $109.99

* For single exhaust, remove “Y” and connect 2lengths of hose with splice connector

Oval TailpipeAdaptersF475 (2-1/2" x 6") . . . . .$16.99F575 (3-1/2" x 8-1/2") . .$20.99

Splice ConnectorsSP25 (2-1/2") . . . . . . . . . .$3.99SP30 (3") . . . . . . . . . . . . .$4.99

Y-AssembliesYA300 (3") . . . . . .$75.99

Rubber Door PortsDF25 (2-1/2") . . . . . . . . . . . . .$11.99

Y-ConnectorsRY25 (2-1/2") . . . . . . . . . . . .$12.99RY30 (3") . . . . . . . . . . . . . . .$12.99

Exhaust HoseFLT250 (2-1/2" x 11' hose) . . . . . . . . . . . .$44.99FLT300 (3" x 11' hose) . . . . . . . . . . . . . . .$54.99

Crushproof ®

Straight Tailpipe Adapterswith Hook & Chain

F250 (2-1/2") . . . . .$9.99F300 (3") . . . . . . .$11.99F350 (3 1/2") . . . .$18.99

Air Hose ReelProvides a large 10" diameter reel to prevent tight coils in your air hose. Two built-in tool hangers keep your air chuck, blowgun or other air tools handy. The constant supply 1/4" NPT brass swivel keeps air flowing freely and handles up to 250 P.S.I.even when dispensing or winding air hose. A coil spring brake keeps reel from unrolling, yet allows easy dispensing of hose. 50350 Each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.99Simple Installation: Mount indoors or out, Punched for solid or swivel mount on; Wall, bench, Service vehicle, or Compressor frame


Part# Size Range62010B 9/16”-1-1/16”

62012B 11/16”-1-1/4”

62016B 13/16”-1-1/2”

62020B 13/16”-1-3/4”

Part# Size Range62024B 1-1/16”-2”

62028B 1-5/16”-2-1/4”

62032B 1-9/16”-2-1/2”

62036B 1-13/16”-2-3/4”


Exh

aust &

Hose

s

81

• TD Performance Products Motor Mount Kit • Headman Hedders • Be Cool Conversion Radiator

Chevy S/B into Jeep CJChevy SB 283-350 into Jeep CJ & J seriesFits CJ-2, 3A, 3B, 5, CJ-7 or J Series. Brackets &pads. Welding is required to install this kit.4100 . . . . . . . . . . . . . . . .$63.99

Ford S/B into Jeep CJFord SB 289-302-351W into Jeep CJ & OthersFits CJ-2, CJ-3A, CJ-3B, CJ-5, CJ-6, and CJ-7,101 & some utility series. Mount brackets &pads. Welding required to install this mount kit. 4101 . . . . . . . . . . . . . . . .$63.99

1967-74 MoparEngine Swap KitFor installing a CHRYSLER 340-360 into an A-BODY with an original slant 6.4695 . . . . . . . . . . . . . . . . . . . .$66.99

1982-97 Chevy S10Swap MountsFor installing a Chevy SB V8 into Chevy S102WD using stock 4.3L V6 mounting pads.4691 . . . . . . . . . . . . . . . . . . . .$66.99

1984-97 ChevyAstrovan EngineSwap KitFor installing a Chevy V8 into a '84-97Astrovan 2WD using stock 4.3L V6 mountpads.4696 . . . . . . . . . . . . . . . . . . . .$66.99

V8 Conversion Kits

Solid Transmission MountThis cast-aluminum Transmission Mount prevents engineflex and transfers torque to the chassis. It eliminates later-al movement of the engine and transmission duringclutch release. All hardware for easy installation is includ-ed. Top holes are 1-1/2" on center, tapped 7/16-14.Bottom slots are 3-3/4" to 4-1/4" on center.

3673 All GM 4-speed, all Muncie 4-speed, all Borg-Warner T-104-speed, all Saginaw 3-speed . . . . . . . . . . . . . . . . . . . .$28.99

Racers TapeWorks great to hold together damaged,cracked or broken parts on your racecar to help you finish the race. 1,88 in.x 60 yd. roll. Available in yellow, red,white and black.

49828 Yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.9949829 White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.9949830 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.9949833 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99

3M

Part# Make Year Engine Swap Tranny Price1815 *S10 82-93 S/B Chevy Manual $491.081816 *S10 82-93 S/B Chevy Auto $534.831817 *Ranger 82-92 S/B Ford Auto $582.111818 *Ranger 82-92 S/B Ford Manual $582.111818A Jeep CJ72-86 S/B Chevy V8 Auto $772.111818B Jeep CJ72-86 S/B Chevy V8 Manual $667.16

* 2 wd Only

Super Hi-Miler HoseCombat high engine temperatures withGoodyear’s Super Hi-Miler High PerformanceBlue Hose. Super Hi-Miler is a blue, highheat-resistant hose designed to providesuperior performance over standard EPDMcoolant hose.

5001 Ford Mustang 5.0L 86-93 . . . . . . . . . . . . . . . . . . . . .$65.995002 Camaro & Firebird 5.0L, 5.7L 87-92 . . . . . . . . . . . . . .$74.995003 Ford F-Series & Bronco 5.0L, 5.8L 88-94 . . . . . . . . . .$81.995004 Chevrolet & GMC Pickups 5.0L, 5.7L 84-87 . . . . . . . .$49.995005 Chevrolet & GMC Pickups 5.0L,5.7L 88-95 . . . . . . . . .$88.995006 Camaro & Firebird 5.7L 95-97 . . . . . . . . . . . . . . . . .$89.995007 Chevrolet Impala SS 5.7L 94-96 . . . . . . . . . . . . . . . .$73.995008 Chevrolet Corvett 5.7L (will not fit ZR-1) 85-89 . . . . . .$67.995009 Ford Ranger 4.0L 90-94 . . . . . . . . . . . . . . . . . . . . .$67.995010 Chevrolet S-10, 4.3L GMC S-15, 4.3L 88-95 . . . . . . .$58.995011 Chevrolet Monte Carlo SS 5.0L 1982-88 &

Pontiac Grand Prix 5.0L 1983-87 . . . . . . . . . . . . . . . . .$50.995012 Ford Mustang 5.0L 1994-95 (except Cobra) . . . . . . . . .$74.995013 Ford Mustang 289, 302 & 351 V-8 Engine 1964-69 . . .$48.995014 Ford Mustang 5.0L 1979-85 . . . . . . . . . . . . . . . . . . . .$54.99

Monroe Shocks and StutsLots of applications available! Call today for yours!

Tools

82 To order Call Toll Free 1.800.831.0884

Double FlaringTool SetMakes both single and dou-ble SAE flares31310 . . . .$33.99

Ring GrooveCleaner24000 . . . .$12.99

Piston Ring InstallerTapered jaws to removeand install most passengercar and light truck ringsfrom 3/64" to 1/4" (1.2-6.3mm)33500 ...............$3.99

Rocker StopperSpring steel clips with gasketsstop splashing, squirting hot oilwhile you adjust clearance. 16per set.35500 ......................$5.99

Fan Belt TightenerWorks on most alternators andsome other belt driven units.1/2" square drive.

12400 ................$6.99

Transmission/Transaxle Plug SetFive stepped plugs fit both transmis-sions and transaxles on most importand domestic cars and pickups.

23400..............................$8.99

ScribeIdeal for marking most metaland softer material surfaces.

31800 . . . .$3.99

“O” Ring & SealPick31840 . . . . .$3.99

Lisle Catalog64 pages of automotive specilatytools. lisle catalog . . . . .$5.00

Brake Caliper Bit SetFor servicing disc brakes. Three3/8" square drive sockets withhex bits to remove and replacefloating caliper mounting bolts.

12550 . . . . . . . .$5.99

Brake CaliperTORX Bit Set27740.....................$7.99

Rear Disc Brake Piston ToolTool fits six different piston cavityconfigurations. Made specifically forvehicles with four wheel discbrakes.

28600.....................$8.99

Bearing PackerQuickly flushes out oldgrease and repacks bear-ings with less mess. thepacker works on bearingsup to 3 1/2” O.D.34550 . . .$17.99

3-Stone Brake Cylinder Hone3-stone hone fits cylinders27/32” to 2" (21.4-50.8mm). 10000 . . . . .$10.99

Oxygen Sensor SocketRemoves and Installs OxygenSensors on Most Domestic andSome Imports. Special 7/8” socketwith cutaway slot to provide clear-ance for wire harness. Providesadequate depth to fit over sensor.Heat-treated alloy steel. Use with

3/8” square drive or 1” wrench.12100 . . . . . . . . . . . . . . . . . . . . .$10.99

Oil Pressure Socket SwitchFits 1" & 1 1/16" switches up to1 5/8" long, found on newerGM and Chrysler vehicles.13200................$4.99

Vacuum/Fuel Line Tester

Easy to read gaugeassures accurate vacu-um and pressure check.20300 . . .$14.99

Computer Safe Circuit Tester& PolarityIndicatorSafe for use on 12 volt auto-motive computer circuits. 27450.................$9.99

Torque AngleMeterFor all torque-to-yield fastenerapplications.

28100 .............$27.99

Fuel Line Disconnect SetFor Ford Trucks. Quickly dis-connects rear fuel tank lines.36450............$18.99

Compression TesterGauge registers 0-300 psiand 0-2100kpa. Fits 14 and18mm thread sizes.

20250................$24.99

Valve HolderFor both 14mm and18mm spark plugthreads. Commonlyused when valvesprings or valve stemseals are replaced. Air

pressure helps prevent the valve from falling intothe combustion chamber. 12” flexible hose.19700..................................................$6.99

Rigid Cylinder HoneMicrometer headassures accuracy infeeding. Expandsquickly to cylinder sizewith fast action rackand pinion. Clip-on

stones and wipers are easily changed in a fewseconds.15000 ......................................$139.99

Rigid Cylinder HoneReplacement Stones15500 80 grit . . . . . . . . . . . .$10.9915510 180 grit . . . . . . . . . . .$10.9915520 280 grit . . . . . . . . . . .$10.9915990 500 grit . . . . . . . . . . .$10.99

Hot SleeveMade of durable, heatresistant Kevlar®. Doublewall construction foradded heat protection.Will work on both left orright arm and is washable.18700 ..............$9.99

Wrinkle Band CompressorToolCuts friction in half, ringsslide easily. Can’t slipdown into cylinder. Setadjustment screw just

once for entire set of pistons.

21700 . . . . . . . . . . . . . . . . . . . . . . .$9.99

Valve Spring CompressorMakes compressing the spring and removing the

keepers a simple job becausethere is no need to removethe head. Adjustable camaction. Fast because there isno need to re-adjust the toolafter each spring.16750 . . . . . . . .$20.99

Hydraulic LifterPullerRemoves stuck hydraulic valvelifters. Expanding collet firmlygrips the tightest lifters. Specialdesigned slide hammer jars thelifter loose.13750 . . . . . . .$23.99

Flexplate WrenchWorks on GM transverse mounted engines

where spanner type toolswon’t fit. Adjustable grippersfit both wide and narrowrims. Works on all flexplates.25500...............$12.99

Tools

83

Serpentine Belt ToolUse to remove andinstall belts on serpen-tine belt systems usinga spring loaded idlerpulley.

57900 . . . . . . . . . . . . . . . . . .$43.99

Heavy-Duty ScraperSharp, hardened steel bladesremove carbon, old gasketmaterial, adhesives, sludgeand other hard-to-clean sub-stances from blocks, heads,etc.

51000 . . . . . . . . . . . . . . . . . . . . . . . . . .$6.99

Carbide Gasket ScraperSix-sided carbide blade cuts smoother andlasts longer.

51650 .........................$9.99

Pulley PullerThis tool removes power steering,alternator and air pump pulleys onmost GM, Ford and Chrysler vehi-cles. It can also install pulleys on1/8"-16 internally threaded shaft.

38850 . . . . . . . . . . . .$46.99

Fan Clutch WrenchSet for FordRemoves fan clutch on most Fordvehicles.

41800 .......................$62.99

Harmonic Balancer PullerDesigned to ease the oper-ation of pulling the bal-ancer pulley. It reducesdamage to both the pulleyand the shaft.

45500...................................................$15.99

Pitman Arm PullerHeavy-duty puller works on most carsand trucks.

41900 .............................$24.99

FWD Axle Socket39500 30mm....................$12.9939550 36mm....................$16.9939700 32mm....................$13.9939750 34mm....................$13.99

Inner Tie Rod ToolWorks on the inner tie rodswith inaccessible wrench flats.Utilizes 5 crows feet, sizes 1-3/16", 1-1/4", 1-5/16",1-7/16" and 33.6mm, toengage the wrench flats.

45750....................................................$47.99

Heavy-Duty Internal External Snap Ring PliersReversible action for both internal andexternal. Ten tip set is included to fit awide range of snap ring sizes.

49200 . . . . . . . . . . . . . .$21.99

Economy Strut ToolSuper safe strutspring compressor.Fits all strut springssizes, import anddomestic.62300 .$46.99

Screw ExtractorMade of specialhardened, shockresistant tool steel.Works on both leftand right handthreads.

62900 ......................................$11.99

Tap Socket SetIdeal for use inareas where a T-handle won‘t fit.70500 $27.99

MagneticSocketHolders

26 socket compartments for 1/4" drive40120 red . . . . . . . . . . . . . . . . . . . . . . . .$11.9940130 green . . . . . . . . . . . . . . . . . . . . . .$11.9928 socket compartments for 3/8" drive40200 red . . . . . . . . . . . . . . . . . . . . . . . .$14.9940210 green . . . . . . . . . . . . . . . . . . . . . .$14.9916 socket compartments for 3/8" drive40280 red . . . . . . . . . . . . . . . . . . . . . . . .$10.99

Super TORX Set20% stronger then one piece Torxbits.

37600 .........$21.99

Mini Tube CutterAll nylon construction. Gives asmoother, easier operation and longerlife. For all types of metal tubing.

50000 .................................$4.99

AC/Fuel LineDisconnect Tool SetSet of six tools which disconnectthe spring lock couplings on Fordand Chrysler air conditioning line.

37000 ...............................................$7.99

Ignition Spark TesterQuickly checks spark atplug wire.50850..........$4.99

Spark Plug Wire PullerRemoves spark plugwire boots from plugs.

51250......$4.99

Tele-MagPocket size,Telescopes from 41/2" to 16 1/4"

66500 . . $4.99

Combustion LeakDetectorChecks for combustion leaks caused by badhead gaskets, cracked blocks, and crackedor warped heads. 75500 . . . . . . . . . . . . . . . . . .$29.99

Mechanic’s StethoscopeUnique soundchamber andsuper thindiaphragm great-

ly amplifies sounds. Quickly pinpoints thesource of noises in engines, transmissions,differentials and bearings.52500 ......................................$10.99

Parking Brake CableRemoverMakes parking brake removal easier.

40800 ..........................................$8.99

Steering Wheel PullerUniversal puller for most makesand models. Screw pad protectsend of steering shaft. Heavyduty for long wear.

45000 . . . . . . . . .$12.99

Valve Spring CompressorExceptionally strong, rigid frame,weighs only 6 lbs. Works with nearlyall valve-in head and L-head enginesas well as truck and tractor engines.44300 . . . . . . . . . . .$52.99


Tire PressureThis 60 PSI gauge retains the last measure-ment until the pressure is released.Patented design assures accuracy anddurability, while a large dial and angledchuck enable easy measuring.2343 . . . . . . . . . . . . . . . . $18.99

Tools

84

Padded Low ProfileSteel CreeperFully padded creeper with vinyl, four 2inch rubber all bearing rollers96302 42 inch . . . . . .$49.99

Steel LowProfileCreeper1/2" plywood bed,with four 2" rubberrollers and extralarge headrest.42 inch96202 $44.99

Replacement Casters96132 2 inch Oil resistant rubber casters w/bearings99702 3 inch Steel CasterEach . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.99

• Body fitting design • Now 2" longer (38") • Six pop-in style 2" wheels

#92102 Red

#93102 Yellow

#94102 BlueAny Color $54.99 each

Low-Profile Plastic Creepers

EconomyCreeperBolted construc-tion, four cross rails,vinyl covered poly-foam headrest and3 inch steel casters.42 inch98262 $27.99

Accessories for Plastic CreepersFlexible Light Holder fits on right or left side ofcreeper (trouble light not included)93702 . . . . . . . . . . . . . . . . . . . . . .$4.99

Padded Jeepers Low-Boy

Big 14" x 18" lower shelf, steel 3" casters.98702 . . . . . . . . . . . . . . . . . . .$34.99

Safety Scraper• Comfort grip handle • Removes wall paper, vinyl &resilient tile • Great for cleaning floors, glass & tileW230 . . . . . . . . . . . . . . . . . . .$4.99Scraper Replacement bladesW229 5 pieces . . . . . . . . . . . .$2.29

Deluxe Porting KitThe most complete and comprehensive cylinder headporting kit available today. Ideal for cast iron and alu-minum heads and intake manifolds. Individual compo-nents can be reordered for other deburring and polish-ing projects. Best results can be achieved when usedwith a straight air grinder or electric grinder with a 1/4"collet. Includes Porting & Polishing Do-It-Yourself Guide.

260001 56 Pieces . . . . . . . . . . . . . . . .$42.99

Basic Porting KitGreat kit for touching up a set of heads that havealready been ported and polished. When freshening upa set with a valve job and new springs, this kit will makethe job complete. Includes Porting & Polishing Do-It-Yourself Guide.260012 . . . . . . . . . . . . . . . . . . . . . . . .$21.99

Cartridge Roll KitA great value! Save time and money with this generousassortment of our most popular types and grits ofStraight Cartridge Rolls, in coarse, medium and finegrades. Keep these Cartridge Rolls in your shop for avariety of hard-to-reach applications. Essential tools forengine porting, including intake manifold, heads andexhaust manifold. Kit includes 1/4", 3/8" and 1/2" car-tridge rolls, in 40 and 80 grit, and mandrels. 260006 . . . . . . . . . . . . . . . . . . . . . . . .$23.99

Complete Engine CleaningBrush KitEach brush is made from quality materials to with-stand tough handling. Brush diameter ranges from1/4" to 5".5192 . . . . . . . . . . . . . . . . . . . . . . . . . .$26.99

Engine Port Polishing KitFor use on cast iron and aluminum components. Thekit contains one tapered cutting stone, one 1" diame-ter mini grind-flex flat wheel, thirty-one grind-polishingrolls (assorted sizes) and three various length mandrels.4362 . . . . . . . . . . . . . . . . . . . . . . . . . .$38.99

Replacement GasketRemoval DiscsUsed with Gasket Removal Kit #1214. Contains twogeneral purpose 3" diameter discs in medium grit andvery fine grit.1215 . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.99

Carburetor Cleaning KitPerformance booster, time saver! An assortment of cus-tom abrasives, designed to increase the performance ofyour carburetor, while decreasing the time needed towork on it.260000 . . . . . . . . . . . . . . . . . . . . . . . .$28.99

Gasket Removal KitsThere’s an easier way to remove gaskets and silicone! OurQuick Change Surface Conditioning Discs provide time-savingconvenience. The right tools for removal of gaskets fromheads, blocks, thermostat housing and water pumps.

260010 (2" Diameter) . . . . . . . . . . . . . . . . . . .$13.99260005 (3" Diameter) . . . . . . . . . . . . . . . . . . .$14.99

Gasket Removal KitThis kit gives you the right tools for removal of gaskets.Kit includes: 2 medium and 2 very fine grit 3" diameterdiscs, 3" holder pad, 1/4" mandrel for holder pad,heavy-duty gasket scraper and plastic storage case.1214 . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99

Utility Cut-Off ToolM563DBEach . . . . . . .$28.99

Tools

85

2 Ton Trolley Jack• 4,000 lb capacity• Maximum height 15"• Heavy duty construction • 27 lbs.W1614 . . . . .$24.99

3 Ton JackStands• Ratchet style for easy

adjustments• 12" to 17 1/4" rangeW41022 . . .$18.99

Hydraulic Bottle Jacks• 4 Ton• Adjustable top screw• Heavy duty baseW1623 . . . . . . .$14.99

1,250 lb Engine Stand• Stable 4 wheel design• Head rotates 360° &

locks in 6 pos tions• Sturdy metal parts trayW41031 . . . .$78.99

3/4 Ton Engine Leveler• Heavy duty drop forged

steel construction• Heat treated chain and

hooks• Fully adjustable with

threaded rod and 3-posi-tion chain mount holes

W41030 . . . . $32.99

1000 lb. Engine Stand• 4 wheel design • Rotates 360º & locks in

6 positions• Heavy duty reinforced

mounting headW41025 . .$54.99

Engine Tilter™

TD Performance's“Engine TilterTM” loadleveling device makesinstallation and removalof your engine fast andeasy. You have com-plete control over your

engine. Shop rated at 1200 lbs.9099 Load Leveling Device . . . . . . . . $79.99

2 Ton Power Puller• Notch at a time

safety release• 2 ton pull capac-

ity (Rolling)• 12 foot cable

W4000DB . . . . . . . . . . . . . $16.99

Engine Lift Plate• Fits most two & four

barrel intakes • Lifts engine by intake

manifold • 1,000 lb maximum

load

W41033 $19.99

EngineLifting Chain

•1,000 lb Maximum load • Link locking for balance & slip-free lifting • Heavy duty 24” chain, 28” overall length • Heat treated alloy steel

W41032 Master 24 Inner 6 Carded $7.99

Engine FeetThe slickest, most ver-satile enginestand/dolly you’veever seen. Strongenough to easily holda complete big blockwith accessories andtransmissionattached. Made inthe USA.

1101 Small & Big Block Chevy .$79.992201 Small Block Ford . . . . . . .$84.992301 Big Block Ford 429, 460 .$84.99

3" Cut-OffWheelsM575Per 25 . . . . . .$14.99

9 Pc. 3/8" Drive Impact SetM588DB SAE 5/16,

3/8, 7/16, 1/2, 9/16,

5/8, 11/16, 3/4

Each . . . . . . . . .$5.99

M589DB Metric 8, 10, 11, 12, 13, 14, 17, 19 mm Each . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99

12 Pc. 1/2" Drive DeepImpact Set

M590DB SAE 3/8,7/16, 1/2, 9/16, 5/8,11/16, 3/4, 13/16, 7/8,15/16, 1 Each . . . . . . .$17.99

M591DB Metric 10, 11, 12, 13, 14, 16, 17, 19,21, 22, 24 mm Each .....................$17.99

9 Pc. 3/8"Drive DeepImpact Set

M594DB SAE 3/8, 7/16, 1/2, 9/16, 5/8, 11/16,

3/4, 13/16 Each . . . . . . . . . . . . . . . . . . .$9.99

M595DB Metric 10, 11, 12, 13, 14, 16, 17, 19mm Each.................................................................$9.99

11 Pc. 1/2" Drive Impact SetM592DB SAE 7/16,1/2, 9/16, 5/8, 11/16,3/4, 13/16, 7/8, 15/16,1 Each . .$11.99

M593DB Metric 11, 12, 13, 14, 16, 17, 19, 21,22, 24mm Each . . . . . . . . . . .$11.99

Piston Ring FilerMount the filer to your work bench, posi-tion the ring against the stops, and crankthe wheel. Carbide coated steel wheelfiles the hardest of rings.66785 . . . . . . . .$53.99

Extra Carbide Wheel66786 . . . . . . . . . .$9.99

Safety Wire TwistPliersThree tools in one with thisspring loaded, automaticreturn, safety wire pliers. Youget a cutter, wire twister and aheavy-duty pair of pliers.8023G . . . . . .$33.99

Safety Lock WireUse to secure a variety of fas-teners. Made of .032" diame-ter 304 stainless steel andcomes in one pound cans.Note: Should not be reused

8022G . . . . . . .$18.99

Tools


HarmonicBalancer Puller& Installer SetW89711 . .$64.99

Pulley Puller &Installer Set• For most alternator &power steering pulleys• Includes GM power steer-ing line disconnect toolW89708 . . . . .$36.99

Timing Gear PullerW89705 . . .$19.99

Steering WheelPullerUsed for pulling original wheelor previously installed Grantwheel from shaft.5891 . . . . . . . . . .$6.99

Steering WheelRemover/LockPlateCompressor Set• Includes non-threadedpuller legs for late modelvehicles with non-threaded

hubs • Includes Steering wheel lock platedepressing tool • Includes pivot pin removingtool for servicing tilt steering wheels

W89704 . . . . . . . . . . . . . . . . . .$44.99

HarmonicBalancer Removal/Installation ToolMakes a difficult job easy!Installs almost any harmonicdamper on GM, Ford, andChrysler. Also works as a univer-sal puller.66514 . . . . . . .$69.99

Engine Rotator ToolSmall Block Chevy. Provide a positiveway of rotating the engine whensetting valves, locating TDC or

degreeing a cam. Tool has a 1-1/4" hex headand includes alignment key.6270 . . . . . . . . . . . . . . . . . . . . . .$21.99

Crankshaft Turning SocketProform socket slips on the end ofthe crank shaft. Then use a 1/2"ratchet for rotating the engine.

66899 Chevy Big Block . . . . . . . .$18.9966900 Ford S/B, Buick & Pontiac w

3/16" key . . . . . . . . . . . .$18.9966901 Chevy S/B . . . . . . . . . . . .$16.99

Crankshaft Socket 1"Diameter Center Hole1/2" square drive makes it possible to turnthe engine with the degree wheel in place.

4793 S/B Chevy 265-400, 90° V6, GM 4 Cyl . . . . . . . . . . . . . . . . . . . .$26.99

4797 B/B Chevy 396-454 . . . . . . . . . . . . .$31.994798 Ford 302-351W, 429-460 Pontiac

389-455 and Buick . . . . . . . . . . . . .$31.994799 Chrysler V8, “LA”, “RB” and Hemi,

(2) 1/4 keyways 180° apart . . . . . . .$29.99

Cam Bearing Installation ToolChevy S/B

66794 . . . . . .$79.99

Chevy Camshaft Installation HandleAllows firm, two hand grip of a camduring installation. For big or small

block Chevy, will not fit late model hydraulic roller cams.4919 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.99

Cam Checker ToolIncludes 0-1.000” DialIndicator 66962! With o-rings on each end toassure securing position-ing, this unit slides downinto the lifter bore and sitsatop the camshaft foraccurate measurement of

lobe lift and base circle runout. Supplied with towfollowers, on for flat tappet of hydraulic cams,and the other for roller cams. Designed for GMand Ford applications.

66838 GM/Ford Cam Checker Tool . $54.99

Degree WheelCrane’s degree wheels aremade from rigid, durablestamped steel, 9 1/2" in diame-ter, and come with adapterinserts for 7/16", 1/2", and

5/8" center holes.99162-1.........................................$28.99

Degree BushingThese bushings are color coded foreasy identification and come in 0-2-4-6-8 degree increments.11991-1 All Chevrolet V8’s $14.99

Camshaft Degree Kit(with cyl. heads on the engine)

Universal cam degree kit includes 9"degree wheel, cam checking fixture,1" travel dial indicator, instructionvideo, wire degree wheel pointer andmore!4796 . . . . . . . . . . . . . .$129.99

Thrust Buttons200 Small Block Chevy .795" length $7.99207 Big Block Chevy .945" length $7.99

Wear Plates201 Small Block Chevy .030" thick $12.99203 Big Block Chevy .030" thick $12.99

Tune-A-Cam KitEverything you need toquickly, easily and accu-rately degree-in yourcamshaft for maximumperformance. Complete kitcontains: precision dialindicator, with custom

design base to mount to cylinder head, pistonstop, pointer, checking spring, degree wheeland instructions —all in a hard molded plasticcarrying case.99030-1 . . . . . . . . . . . . . . . . . .$179.99

Cam Button Spacer(NeedlE Bearing)Prevents roller camshaft from “walking”and reduces friction

99164-1 Chevy V8 262-400 . . .$7.9999165-1 Chevy V8 396-454 . . .$7.99

Balancer InstallerInstall delicate harmonic balancer on enginewith either 7/16" x 20 or 1/2" x 20 crank-shaft bolt.99033-1 . . . . . . . . . . . . . . . .$41.99

This tool makes installing the harmonicbalancer simple; just thread the properend into the crankshaft, and then rotatethe nut which presses the bearing againstthe balancer which will slide onto thecrankshaft smoothly.66515 . . . . . . . . . . . . . . . . .$22.99

Harmonic Balancer Installation Tool

Camlock Plate & BoltAssemblyPrevents cam bolts from loosening duringengine operation. Works on Chevy 262-400,348-409, 427(Z11), 396-454 and 90° V6,200-262.

4605 . . . . . . . . . . . . . . . . . . . . .$2.99

Auto Dollies• 12” wide - 16” long • Move your car or truckin any direction • Makesstorage easy • Savegarage space • Low pro-

file design • 6,000 lbs capacity • All steel con-struction • Zinc plated ball bearing casters • Made from 1/4” steel plate

M998002 Set of 4 . . . . . . .$129.99

This heavy-duty, simple-to-use, manualvalve spring compressor makes short work of even mon-strous springs. The compressor arm slides for adjustment,employing a locking pin for rapid, easy operation.66832 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.99

Tools

87

Valve SpringCompression ToolFor removal and replacement of valvesprings on most popular engines.

99417-1 . . . . . . . . . . .$19.99

Valve Spring Height Micrometer(0.001")Measure installed valve spring height convenient-ly and accurately. Simply install the heightmicrometer instead of a valve spring, and therotate the clearly engraved dial to expand thetool to seat the valve, locks and retainer.

66902 Range: 1.6"-2.100" (for most V-8 Engines) . . . . .$49.99

Vacuum Reserve SystemReserve system for power brakeswhen your engine can’t supply it.5" x 7", this unit comes with all hardware. 99590-1 . . . . . . . . .$45.99

Organizer TrayHandy organizer tray, light-weight design, for a widerrange of rocker arms andengine parts.99015-1. . . . . $27.99

Straight EdgeUsed to check for flatness on blocks, heads andvalve springs. Accurate to .001 inch.

T620 Straight Edge (32" long) . . .$49.99

Valley TraysKeep gasket debris from enteringthe engine when cleaning theold intake gaskets off yourheads. Each kit includes a cus-tom fit, reusable Valley Tray,eight foam intake port plugs, agasket removal disc and a holder

pad with 1/4" diameter mandrel for yourdrill or air powered die grinder. Sure beats the old shop rag method!260020 SB Chevy Stock/Small RacePort

. . . . . . . . . . . . . . .$20.99260021 SB Chevy Medium/Large Race

Port . . . . . . . . . . . .$20.99260022 BB Chevy Rectangle Port

. . . . . . . . . . . . . . .$20.99260023 302 Windsor Ford, All Ports

. . . . . . . . . . . . . . .$20.99

PIONEER

Pro Model PistonPusherThe internal springmechanism and non-marring plastic push-ing surface make pis-ton installation andremoval easier andsafer. This is a must

have tool for crew chiefs and profession-al mechanics.

8864 . . . . . . . . . . . . . . . . . .$38.99

Piston RingCompressor Set• Includes six sizes of bands

for multiple applications• Band Sizes Included:

2-7/8” thru 4-3/8” 73 thru 111mm

W89410 . . . . $42.99

Rod ViseHolding connecting rods securely with-out damaging them is necessary forremoving or installing rod bolts, beampolishing or machining. This aluminumvise is designed for all sizes of aluminumor steel rods, and can hold several atonce. It will mount in a bench vise or

can be permanently mounted.66769 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99

Connecting Rod BalancerThe fixture holds each end of theconnecting rod on the scale sepa-rately, for weighting the big andsmall ends. It comes with two man-drels to cover most popular engines,and it is ordinarily used with a digitalor mechanical weighing scale. 66844 . . . . . . . . . .$139.99

0-6” StainlessSteel DialCaliper• Measures outside,inside,step and depth

• Features adjustable dial& thumb wheelfine adjust-ment.• 0-6” Range, .001” (.02mm) graduations, .100” (2.0mm) range/revolution

W80151 . . . . . . . . . . . . . . .$29.99

6” DialCalipersEnsure accurate meas-urements with this jew-eled dial vernier caliper.

It reads .100" per complete revolution andwill read to .0005". Caliper comes com-plete with carrying case.4908 6" Dial Caliper . . . . . .$44.99

Precision Pro-LockTorque Wrench• 1/2" Drive 30-250 ft. lb. Range

• Fine tooth ratchet head forprecision torque control

• Clockwise and Counter-Clockwise operation

• Micrometer adjustable meas-urements in bothFoot/Pounds and NewtonMeters permanently etchedon tube

• Patented Torque AdjustingLock/Unlock Collar

M199 . . . . . . . . . . . . . . . . . .$49.99

1/2" Dr. Beam Torque Wrench• Chrome plated alloy steel body • Package includes torque specifi-cation table • 0 to 150 footpound rangeW3001C . . . . . . . . . .$14.99

Oil Pump Primer withBushingChevy V8, 90º V6

66896 . . . . . . . . . . . . . . . . . . . .$23.99

Oil Pump PrimerTool

99010-1 Chevy 262-400, 396-454 90° V6 . . . . . . . . . . . . .$26.99

99012-1 Ford V8 221-302, Boss 302, 351W 1/4" hex . . . . . . .$18.99

99013-1 Ford V8 351C/351M/Boss 351/400/370/429/460 5/16" hex . . . . . . . . . . .$18.99

Stud Mount ValveSpring CompressorFor all 3/8" and 7/16" Rocker Studs66784 . . . . . . . . . . .$48.99

Heavy-Duty ValveSpring Compressor

Valve Lash Wrench SetThis simple T-handle and wrench setmakes adjustment very easy, cutting theadjusting time in half. Simply positionthe adjusting handle wrench over therocker arm lockdown, and drop theappropriate T-handle down through thehole in the wrench.

66778 1/2” with 3/16” and 1/8” . . . . . . . . . .$19.9966779 7/16” with 3/16” and 7/32” . . . . . . . . .$20.99


3 In 1 LightedMagneticRetriever• 17-1/2” flexible inspec-

tion light • Magnetic retriever attachment • Inspection mirror attachment

W80704 . . . . . . . . . . . . . . . . . . . .$11.99

Stainless SteelDigital Caliper• Measures outside,inside, step and depth

• 0-6” Range with SAE to Metric conversion• Zero setting at any position within measuringrange • Thumb wheel lock • Battery included

W80152 . . . . . . . . . . . . . . . . . . . .$44.99

Stainless Steel Roll-Around Magnetic Tray• Stainless steel tray, with built-in magnets,keeps small parts & tools from being lost •Handles for easy carrying • 12” diametertray • Oil resistant, scratch proof wheels

W1257 . . . . . . . . . . . . . . $28.99

Tools

88

NEW LOWPRICE!

MasterDisconnectSet

• Includes disconnect tools for; Air Conditioning, Fuel, Heater, .Transmission, and Power Steering lines

W89331 . . . . . . . . . . . . . $114.99Front Hub Puller &Installer Set•For use on most front wheel drive vehicles

W89324 . . . . . . . . . . $55.99

Coil Spring Compressor• For use on most automotive

and light truck applications•Chrome moly steel jawsW89311 . . . . . .$29.99

Spindle Nut Wrench Set• For many 2 wheel and 4 wheel

drive light truck applications• Includes 4 x 4 spindle removing-

socket• Includes Toyota locknut wrench

W89319 . . . . . . . . . .$37.99

Front End Service Set• For removal of most

types of Pitman Arms, TieRods, & Ball Joints foundon automotive and lighttruck applications

W89303 . . . . $99.99

Brake Caliper Service Set• For use on most import and

domestic vehicles equipped withfour wheel disc brakes

W89200 . . . . . . . . . .$47.99

Professional StrutSpring Compressor• For most automotive and light truck

applications• Includes locking pins for additional

safety

W89322 . . . . . . . . . . . $29.99

Tie Rod/Ball Joint Separator Set• For separating most types ofPitman Arms, Tie Rods, & BallJoints found on automotiveand light truck applications• Complete coverage set, fea-turing five different sizes,including separators for latemodel Ford and GM pickupsW89310 . . . . . . .$36.99

Axle Nut Socket Set• Contains: One each 29, 30,

32, 34, 35, 36 and 38 mm• 1/2” Drive 6-point extra long

socketsW89317 . . . . . . . . .$46.99

Fuel &Transmission Line DisconnectTool Set• Color-coded,

Anodized Aluminum Fuel Line Disconnect Tools Sizes: 5/16” and 3/8”

• Includes Ford Fuel Coupling Tool

W89330 . . . . . . . . . . . . . . .$34.99

6 PieceElectronic FuelInjection TestLight SetQuickly and easily testselectronic fuel injection systemson: GM TBI, Bosch PFI, Ford TBI, GM PFI,Geo TBI and GM SCPI equipped vehicles.Sturdy blow molded plastic storage casewith extra tray. W89500 . . . . . . . . . . . . .$12.99

125 Piece Drill & BitProject Set• 67 Assorted Chrome VanadiumBits -Slotted, Phillips, Hex, Star,Hi-Torque & Robertson andCombo Phillips-Slotted • 7SAE & 7 Metric Assorted NutDrivers• Magnetic Quick Change Bit Extension • 28Assorted Drill Bits (Wood Boring, Masonry, HighSpeed Steel & Center Point) • 4 Hole Saws, HoleSaw Mandrel • 1/4” Center Punch, Counter Sink •Bit Holders, Screw Finders • Blow Molded StorageCaseW1347 . . . . . . . . . . . . . . . . . . . .$29.99

8 PieceSpecialty Pick &Driver SetW941 . . . . . . .$6.99

4 Piece Pry Bar Set• Drop forged steel• Black oxide shafts• New high visibility

orange handles• 8", 12", 18" & 24" sizesW2020 . . . . . . .$9.99

45 Piece Power Bit SetW1352 . . . . . .$12.99

Pistol Grip Grease Gun• Air bleeder valve eliminates air

lock• Uses standard 14 oz. grease

cartridgesW54204 . . . . . . . . . .$12.99

Magnetic Tray•Stick to almost any metalsurface• Holds small metal partsand tools

• Even works sideways or upside-downW1265 . . . . . . . . . . . . . . . . . . . . . $11.99

15 Piece Screwdriver Set• Oversized handles for easy use • Magnetic tips• Contains: Phillips #0 x 2-1/2”,#1 x 3”, #2 x 1-1/2”, #2 x 4”, #3 x 6”, Slotted 1/8” x 2-1/2”,3/16” x 3”, 1/4” x 1-1/2”, 1/4” x 4”, 5/16” x 6”, Star T-15,

T-20 x 4”, Square R2 x 4”, Offset 3/16” Slotted & #1Phillips, Scratch awl

W80015 Master 12 Inner 6 carded .$11.99

6 Piece Stardriver Set with Rack• Oversized handles for easy use • Magnetic tips• Contains: Phillips T-10, T-15,

T-20, T-25, T-27, & T-30W80006 . . . . . . . . . . . .$7.99

7 Piece Ratcheting Combination Wrench Sets•Features 72 teeth ratcheting gear • Slim style, 12 point, • Quality chrome vanadium steel construction• Mirror polish for long lasting use• Meets industry torque specifications

W30630 SAE Sizes . . . . . . . . . . . . . . .$36.995/16, 3/8, 7/16, 1/2, 9/16, 5/8, & 3/4

W30631 Metric Sizes . . . . . . . . . . . . . .$36.998, 10, 12, 13, 14, 15, & 18mm

2 Shelf Utlility Cart• 16 Gauge steel construction• 2 Swivel casters• Easy maneuvering• Shelf dimensions:

28-1/2"x 16-1/4" x 3" deep

W54003 . . . . . . .$44.99



Truck

s & A

ccesso

ries

89

ATV20002,000 lbs rated line pull (Single Line), 2,300 lbsstall, Power in and out, freespooling, cabletensioner, battery cables with terminals, circuitbreaker, handsaver bar, remote mounted rocker switch

01599 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $194.99

2500 SERIES02502 Rated line pull 2,500 lbs., 12VDC Removable switch, Hawse

fairlead and brake, 3/16" x 50' wire rope . . . . . . .$224.993500 SERIES03512 Rated line pull 3,500 lbs., 12VDC Remote hand held switch,

Hawse fairlead and brake, 7/32" x 50' wire rope .$319.9903502 Rated line pull 3,500 lbs., 12VDC Removable switch, Hawse

fairlead and brake, 7/32" x 50' wire rope . . . . . . .$249.994500 SERIES04532 Rated line pull 4,500 lbs., 12VDC Remote hand held switch,

Roller fairlead, Freespooling 1/4" x 50' wire rope .$359.9904512 Rated line pull 4,500 lbs, 12VDC Remote hand held switch,

Hawse fairlead, Freespooling 1/4" x 50' wire rope $339.99

9000 Series • Rated line pull (Single line) 9,000 lbs. • Wire Rope 5/16" x 100' • Stall load 11,900 lbs. • Freespooling clutch

1917 with Roller Fairlead . . . . . . . . . . . . . . . . . . . . . . . . .$679.99

9X• Rated line pull (Single Line) 9,000 lbs. • Wire Rope 5/16" x 100' • Stall load 11,900 lbs. • Freespooling clutch • Automatic brake• Hand held switch and More!1901 . . . . . . . . . . . . . . . . . .$579.992549 Optional Roller Fairlead .$94.99

Husky 10• Power in and power out, freespooling• Heavy-duty series wound motor• Rated line pull (Single Line) 10,000 lbs.• Wire rope 3/8" x 90' • Stall load 11,500 lbs.2404 . . . . . . . . . . . . . . . .$939.99

W1151,000 lbs rated line pull 1,500 lbs stall,Power in and power out, Cable tensioner,6' control pendant. Operates on standardhouse current 120V.1401 . . . . . . . . . . . . . . . . $329.99

AccessoriesTrailer Wiring Kit Fits EX1, X1, X2, X3, S2500, S3500 and S45001520 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.99

Class II Receiver Hitch Mount1559A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.99

Pulley BlocksDouble pulling capacity of winch2227 7000LB Capacity . . . . . . . . . . . . . . . . . . . . . . . . . .$21.992229 9000LB Capacity . . . . . . . . . . . . . . . . . . . . . . . . . .$29.997750A 20,000LB Capacity . . . . . . . . . . . . . . . . . . . . . . . . .$64.99

Shown w/optional Roller fairlead

Shown w/optional Roller fairlead

Conversion Kit Ford, GM NP203 Transfer Case (hubs not included)

501 . . . . . . . . . . . . . . .$44.99

4WD Bearing Nut Tool4 & 6 Slot, 1/2" drive. Fits Ford 3/4 ton, 78-up, and

GM 3/4 ton 73-81

27400 . . . . . . . . . . . . . . . . . . . . . .$20.99

4WD Bearing Nut Tool4-slot 1/2" drive. Fits Chevrolet/GMC 1/2 ton 60-up,Ford F100/250 59-up, Dodge/Int. 1/2 ton 60-up

27250 . . . . . . . . . . . . . . . . . . . .$14.99

The S Series• Power in and out • Mounting Hardware• Pre-Wired switch w/circuit breakers • Made in U.S.A. • Weather resistant coverw/wire rope viewing • Handsaver Bar • Permanently Lubricated Gear Set • Freespooling Clutch

3500 Series

1917

6000 Series • Rated line pull (Single Line) 6,000 lbs. • Wire Rope 5/16" x 100' • Stall load 6,600 lbs.• Freespooling clutch

1680 with Roller Fairlead $599.99

01599

ATV 3000Superwinch’s new ATV3000 DC-powered elec-tric winch offers true 3000 lb. pulling capacity.That’s the best weight-to-pull ratio in theindustry! With lightweight maneuverability

and flexible mounting options, this blue beauty is the premium choice for alltypes of ATV users.Specifications:Rated Line Pull (Single Line) - 3000 lb. (1360kg)Wire Rope with Hook - 3/16" x 50' (4.7mm x 15.2m)Features:• Power in and power out • Freespooling • Mechanical brake • Circuit breaker • 12V DC with sealed remote mounted rocker switch

01530 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$329.99

High Performance GaugesProfessional Products offers several high quality and extremelyaccurate tire gauges. These gauges are accurate to within 1% andare very rugged and well built. Gauges 11100 and 11103 areheavy duty racing gauges while the 11102 (9mm 12-inch longhose) is a great street gauge. The street gauge come with a hardplastic case, perfect for storing in either your trunk or glove box.The racing gauges feature a heavy duty 13 mm hose and extralarge numerals and needle for easy reading in low light condi-tions. A rubber protector is also included on both the racing tiregauges. All Professional Product gauges feature high qualitychrome plated steel construction and high grade neoprene hose.

#11110

• 0-100 psi• Reads in tenths

• Battery included• Automatic shutoff

Racing Tire Pressure Gauges11100 0-15 psi Tire Gauge

w/13mm HD hose . . . . . .$16.9911103 0-60 psi Tire Gauge

w/13mm HD hose . . . . . .$16.99

Street Tire Pressure Gauges11102 0-60 Tire Gauge w/Hose

W/Hard Plastic Case . . . . .$11.9911110 0-100 Digital Tire Gauge . .$11.99

#11100


Truck

& A

ccess

ori

es

90

Tired of Your 4x4Failing? Get theSolution!If you’re tired of your 4-wheel drivefailing, get the only system that puts you in control of your frontaxle engagement system. 4x4 Posi-Lok is the patented cable acti-vated engagement device designed to replace the failure prone OEM(Original Equipment Manufacturer) vacuum and electric front axle engage-ment systems. 4x4 Posi-Lok is not a posi-trac or locker. 4x4 Posi-Lok is simpleand easy to install and allows you to engage your front axle from inside thecab. After engaging the transfer case, a one-inch pull of the 4x4 Posi-Lokcable ensures the front axles are connected. This system puts the driver indirect control of the 4-wheel drive front axle engagement.

PSL400

PSL400 94-01 Dodge 1500-3500 . . . . . . . . . . . . .$199.99All with Dana 44-60 Central Axle Disconnect85-93 Ramcharger, Trail Duster

PSL500 83-01 GM S/T 10-15 trucks, . . . . . . . . . . .$119.99Blazer, Jimmy All with vacuum actuators

PSL600 88-98 GM K1500, 2500 6 Lug . . . . . . . .$170.9592-99 4WD Suburban-All with Thermal Linear Actuator

PSL800 88-98 GM 2500, 3500 8 Lug . . . . . . . . .$170.9592-98 2500 Suburban-All with Thermal Linear Actuator

PSL900 87-95 Jeep Wrangler (YJ) CAD . . . . . . . .$199.9984-91 Cherokee (XJ) with Dana 3086-91 Comanche (MJ) with Dana 30

Supreme Supreme Streetmaster UltimateChrome Price Stainless Price Price Price

AMC/JEEPCJ Universal 72-80 457 $79.99 N/ACJ Universal 81-86 470 $79.99 N/AJ20 Pickup 78-90 402 $52.99 104 $57.99 302 $42.99 101 $89.99

Chevrolet/GMCBlazer, Suburban, Jimmy 69-91 402 $52.99 104 $57.99 302 $42.99 101 $89.991/2 ton Pickup 69-87 402 $52.99 104 $57.99 302 $42.99 101 $89.993/4 ton Pickup 78-87 402 $52.99 104 $57.99 302 $42.99 101 $89.99Chevy 3/4 60-77 423 $79.99 N/AChevy/GMC 1 ton 77-87 449SS $119.99 N/A

Chrysler/DodgeRam Charger/Trailduster 80-92 402 $52.99 104 $57.99 302 $42.99 101 $89.991/2 ton W-100 Pickup 69-74, 80-92402 $52.99 104 $57.99 302 $42.99 101 $89.991/2 ton W-100 Pickup 57-68 423 $79.99 N/A3/4 ton W-200 Pickup 57-74(exc FT 4WD) 423 $79.99 N/A1 ton W-300 Pickup 90-91 449SS $119.99 N/A

FordBronco 66-87, 90-92 402 $52.99 104 $57.99 302 $42.99 101 $89.991/2 ton 59-87, 90-92 402 $52.99 104 $57.99 302 $42.99 101 $89.99Bronco II, Ranger 83-89 427* $134.99Ranger 90-97 428* $134.99Explorer 90-94 428* $134.99 * Conversion Kit Required

SUPREME – The ultimate in style and service with stainless steel cap

STREETMASTER – Chrome cap, unbreakable nylon dial, internal mechanism, same as Supreme

THE ULTIMATE – Made of solid stainless steel, with ductile iron base andsolid bronze bushings. The entire unit is assembled with stainless steel bolts. Fits sameapplications as 104 & 302

Chevy/GMC Part# Price

69-93 Blazer, Suburban 400518 $49.9969-87 1/2 ton Pickup 400518 $49.9960-76 3/4 ton Pickup 400517 $75.9977-87 3/4 ton Pickup 400518 $49.9976-91 K30 1 ton Pickup 400439* $116.99

Dodge57-68 1/2 ton Pickup 400517 $75.9969-75 1/2 ton Pickup 400518 $49.9981-84 1/2 ton Ramcharger/Trailduster 400518 $49.9957-75 3/4 ton Pickup 400517 $75.991991 W250 & W350 4x4 400439* $116.99Call for Other Available applications*Indicates these hubs are built to military specs & havenylon dial rather than the metal dial std on all otherhubs

Hubs• Full metal durability • Works in reverse and compression braking • No slippage or partial engagement/disengagement • All metal construction

Ford Part# Price66-96 Bronco 400518 $49.9959-86 1/2 ton F100 400518 $49.9976-96 1/2 ton F150 400518 $49.9959-75, 78-86 3/4 ton F250 3,000 lb axle 400518 $49.9963-77 3/4 ton F250 3,500 lb axle 400517 $75.9976-96 1 Ton F350 Series, 4,500 lb axle 400439* $116.9978-96 3/4 ton F250 & Crew Cab, 3,800 lb axle (Internal Mount) 400439* $116.99

JEEP42-71 CJ Universal 400501 $69.9972-80 CJ Universal 400502 $69.9981-86 CJ Universal 400526 $65.9974-90 Wagoneer, Gladiator, Cherokee 400518 $49.9974-90 J10 Pickup 400518 $49.9974-76 J20 Pickup 400517 $75.9977-90 J20 Pickup 400518 $49.9956-67 1/2, 3/4 ton Pickup 400517 $75.9968-75 1/2 ton Pickup 400518 $49.99

4 x 4 Front Drive Shafts

Price Core78-86 Blazer, Jimmy, K10, K20Length 29 1/2"41-27208 $179.99 $55.0092-94 Blazer, Yukon, Suburban and K-Series pickupLength 28 1/2" Flange Style41-27215 $134.99 $55.0083-90 S10, S15, Blazer, JimmyLength 26 1/4"41-27216 $129.99 $55.0090-91 F250-350 136.8" WB C6, A/TLength 32 1/4"41-27375 $189.99 $55.0084-86 Jeep CherokeeLength 25 1/16"41-27102 $199.99 $55.00

*Length is measured from center of U-Joint in front to center of U-Joint in rearwith shaft collapsed.Other Applications AvailablePlease Have Length and OE Number

American Remanufacturers Inc.

Truck

s & A

ccesso

ries

91

Now you can get complete Bell Tech front and rear lowering kits packaged togetherin one box. They may include Nitro-Drop or Nitro-Active shocks, front coil spring,and either a hanger/shackle or block kit for the rear. Mounting hardware also included.

A Complete Lowering Kit In One Box!

Kits may include spindles, blocks, U-bolts, front and rear shocks.

Complete Spindle Lowering Kits

Nitro-Drop Shocks are high quality twin-tube nitrogen gas-filled per-formance shock absorbers engineered specifically for your truck.They feature chrome plated centerless ground carbon steel shafts,viatom seal, tapered eye rings and polyurethane bushings.

Call with application for pricing

Nitro-Drop Shocks

Our top of the line shock absorbers feature a monotube designand high pressure nitrogen gas designed to keep your truck gluedto the ground. The monotube design and high pressure gas virtual-ly eliminates the problem of performance fade due to aeration andfoaming - a common problem with shocks that allow air to mixwith fluid.

Call with application for pricing

Nitro-Active Shocks

With over 20 years of experience in suspension design and manufacturing,Belltech is recognized as the undisputed leader in Sport Truck suspensionproducts. Four times recipient of the prestigious SEMA award for best newproduct, Belltech started the lowered Sport Truck craze with the award win-ning dropped spindle. Belltech has continued to build its reputation withthe most complete line of quality Sport Truck products available today.*Note: All drops are approximate…many factors affect vehicle height.

Chevy/GMC - Nitro Active Shocks101 99-00 Chevy/GMC C-1500 std cab short bed only - 2” front, 3” rear $479.99109 99-00 Chevy/GMC C-1500 ext cab short bed only - 2” front, 3” rear $489.99117 88-98 Chevy/GMC C-1500 standard cab - 3” front, 4” rear . . . . . . .$479.99121 88-98 Chevy/GMC C-1500 extended cab - 3” front, 4” rear . . . . . . .$499.99125 00-up Suburban/Tahoe 2” front, 3” rear . . . . . . . . . . . . . . . . . . . . .$499.99Chevy/GMC - Nitro Drop Shocks104 99-00 C1500 std cab short bed only, 3” front, 4” rear . . . . . . . . . .$409.99112 99-00 C1500 ext cab short bed only, 3” front, 4” rear . . . . . . . . . .$449.99116 88-98 C1500 standard cab, 3” front, 4” rear . . . . . . . . . . . . . . . . .$419.99120 88-98 C1500 extended cab, 3” front, 4” rear . . . . . . . . . . . . . . . .$459.99134 00-up Suburban/Tahoe 2” front, 3” rear . . . . . . . . . . . . . . . . . . .$419.99150 94-00 S-10/S-15 P/U std. cab, 6 cyl. 2” front, 3” rear . . . . . . . . . . .$259.99158 94-00 S10/15 extended cab, 6-cyl., 2” front, 3” rear . . . . . . . . . . .$259.99166 82-00 S-10/15 standard cab 4-cyl, . . . . . . . . . . . . . . . . . . . . . . . .$259.99170 83-94 Blazer, 4- or 6-cyl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$259.99178 82-00 S-10/15 extended cab 4-cyl, 3” front, 3” rear . . . . . . . . . . . .$259.99Ford - Nitro Active Shocks401 97-01 Ford F-150, super crew cab, 3” front, 4” rear . . . . . . . . . . .$439.99

(standard & extended cab)405 97-00 Ford Expedition 2” front, 2” rear . . . . . . . . . . . . . . . . . . . . .$439.99409 97-00 Ford Expedition 3” front, 3” rear w/rear limiting straps . . . . .$439.99413 97-00 Ford Expedition 2” front, 2” rear . . . . . . . . . . . . . . . . . . . . .$399.99417 97-00 Ford Expedition 3” front, 3” rear w/rear limiting straps . . . . .$429.99Ford - Nitro Drop Shocks400 97-01 F-150 SuperCrew, 3” front, 4” rear. . . . . . . . . . . . . . . . . . . .$399.99416 97-00 Expedition 3” front, 3” rear. . . . . . . . . . . . . . . . . . . . . . . . .$299.99Dodge - Nitro Drop Shocks300 97-00 Dakota 8 cyl., 2” front, 4” rear. . . . . . . . . . . . . . . . . . . . . . .$429.99

Chevy/GMC - Nitro Drop Shocks264 82-00 S-10/S-15 P/U standard cab - 2” front, 2” rear . .$349.99268 82-00 S-10/S-15 P/U standard cab including extreme

2” front, 3” rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$339.99272 94-00 S-10/S-15 P/U extended cab - 2” front, 2” rear .$325.99274 94-00 S-10/S-15 P/U extended cab including extreme

2” front, 3” rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$339.99

Lowering Rear Leaf SpringsBelltech’s New Multi-Pack Leaf Springs are designed to lower the rear ofyour truck 3” or 4” depending on the application. These leaf springs pro-vide a smooth ride and great looks. All leaf springs are powder coatedand come complete with OEM bushings and sleeves.

Chevy/GMC 2WD Truck

5952 99-00 Chevy/GMC C1500 4” drop . . . . . . . . . . . . . . .$110.995954 82-00 S10/S15 P/U, 82-94 Blazer & Jimmy, 3” drop . . . .$76.99Ford/Mazda 2WD5980 98-00 Ford Ranger, 98-00 Mazda 2WD, 3” drop. . . . . . .$78.99

Belltech dropped spindles lower your truck 2-3 inches andimprove the handling while maintaining factory ride quali-ty. Our spindles maintain critical suspension geometryeliminating excessive ball joint, shock and tire wear com-mon to other methods of lowering. Each spindle is builtfrom high strength ductile iron, providing the structuralintegrity to meet and exceed all factory specifications.

Chevy/GMC

2100 82-00 S-10/S-15 P/U std cab 4&6 cyl except 98-01 6 cyl.$149.992102 98-01 S-10/S-15 Blazer/Jimmy 6 cyl . . . . . . . . . . . . . . .$268.992400 88-91 1/2 ton 2wd std cab . . . . . . . . . . . . . . . . . . . .$229.992500 88-98 1/2 ton ext cab & short box only . . . . . . . . . . . .$229.992505 99-00 1/2 ton C1500/SS454 V8 engine only . . . . . . . .$419.993100 73-91 Suburban 1/2 ton 1-1/4” rotor . . . . . . . . . . . . .$279.99

Lowering Spindles

Chevy/GMC

95-97 S10/S15 Blazer/Jimmy 6 cyl4202 3” drop 4223 4” drop 4227 5” drop

98-01 S10/S15 Blazer/Jimmy 6 cyl.4204 3” drop 4226 4” drop

82-93 S10/S15 P/U, 83-94 S10/S15 Blazer/Jimmy

4200 3” drop 4220 4” drop

88-91 1/2 ton C1500 std cab4400 4” drop

99-00 1/2 ton C1500 std cab & short bed only4402 4” drop 4408 5” drop

99-00 1/2 ton C1500 ext cab & short bed only4456 4” drop 4458 5” drop

Ford

97-01 F150, F250 Light Duty including std, ext cab & super crew

4803 2” drop 4804 3” drop

98-00 Ford Ranger std & ext cab

4797 3” drop

Front Coil Springs SetOur lowering spring kits are designed to work with orwithout Belltech Dropped Front Spindles. Each coil isbuilt from chromium alloy steel and is wound, shotpeened and powder coated to exact specifications toassure the proper ride height, ride quality and long lifeyou expect from Belltech products. 1”, 2” and 3” dropsavailable depending on desired application.


Starting at $82.99 per pair


Truck

& A

ccess

ori

es

92

Our Rear Hanger & Shakle Kits are designed to lower the rear ofyour vehicle starting at 2” depending on your application and main-tain the OEM quality ride. The hanger kits are constructed fromheavy gauge die stamped P & O steel to insure a perfect fit andsuperior quality. All kits feature a durable powder coated finish andhigh quality hardware.

Rear Hanger & Shakle Kits

Belltech Rear Lowering Block Kits are designed to lowerthe rear of your truck in either 1”, 2” or 3” increments. AllBelltech lowering blocks are built of extruded aluminumand come complete with cold rolled 1/2” diameter U-bolts, SAE plated washers and self locking NylocTM nuts.

Rear Lowering Block Kits

Chevy/GMC

6400 97-00 3/4, 1 ton single wheel 8 lug . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.996700 73-99 Suburban - Call for your specific application . . . . . . . . . . . . . . . . .$64.996500 92-98 1/2 ton 2WD std cab only . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.996503 88-98 1/2 ton 2WD ext cab only V8 . . . . . . . . . . . . . . . . . . . . . . . . . .$173.996511 99-00 1/2 ton C1500 std. cab, short bed only 3” drop . . . . . . . . . . . .$149.996512 99-00 1/2 ton C1500 std. cab, short bed only 4” drop . . . . . . . . . . . .$148.996514 99-00 1/2 ton C1500 ext. cab, short bed only . . . . . . . . . . . . . . . . . . .$162.99

1:24 & 1:64 Sets59002 60 Impala . . . . . . . . . . . . . . . . .$29.9959006 59 El Camino . . . . . . . . . . . . . .$29.99

53 Chev Pickup 59003 $29.99

57 Suburban59005 $29.99

Chevy/GMC

6100 95-01 Blazer/Jimmy 2” drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.996200 95-01 Blazer/Jimmy 3” drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.996000 95-01 Blazer/Jimmy 1” drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99

02 Escalade (black) 1:18

63107 $34.99

01 Avalanche 1:24(color may vary)

53339 $14.99

01 Astro Van 1:24(color may vary)

53199 $14.99

53334 01 Avalanche (two tone) 1:24 . . . . . . .$14.99

Check out our website for the latest andgreatest styles in die cast vehicles!

00 Chevy S10 1:24(color may vary)

53179 $14.99

53317 67 Impala 1:24 . . . . . . . . . . . . . .$14.9953357 59 El Camino 1:24 . . . . . . . . . . .$14.99

57 Suburban 1:24(color may vary)

53267 $14.99

72 Chevy CheyennePickup 1:24

(color may vary)53587 $14.99

59 Cadillac Eldorado 1:24(color may vary)

53667 $14.99

00 Suburban 1:24(color may vary)

53007 $14.99

02 Escalade 1:24(color may vary)

53639 $14.99

02 Escalade (candy purple) 1:1863102 $34.99

56 Belair 1:24(color may vary)

53607 $14.9947 Chevy Fleetline 59004 $29.99

53 Chev Belair59001 $29.99

Belltech Flip Kits are designed to relocate the rearaxle of your truck on top of the rear leaf springpack for the lowest drop available. Our kits featureheavy duty, contoured C-Sections, heliarc weldedsaddles, spring plates and shock extensions with ahigh quality powder coated finish. 5/8” U-bolts,high grade hardware and instructions are included.The system is designed to be used with our frontspindles and springs for the ultimate drop.

Flip Kits

Chevy/GMC6605 88-98 C1500 standard cab 6” drop . . . . . . . . . . . . . . . . . . . . . . . . . .$169.996607 88-98 C1500 Extended cab only 6” drop . . . . . . . . . . . . . . . . . . . . . .$199.996612 99-00 C1500 standard cab, short bed 6” drop . . . . . . . . . . . . . . . . . .$269.996614 99-00 C1500 extended cab, short bed 6” drop . . . . . . . . . . . . . . . . . .$289.996850 73-87 C-10 6” drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$189.99Dodge6680 94-98 Dodge Ram 1500 2wd standard cab auto tranny V8 only 7” drop$299.99

Nitro

us

93

Edelbrock is known for innovative products, and our newNitrous Systems are no exception…

All Edelbrock Nitrous Systems are dyno-tested and calibratedto deliver accurate and safe horsepower gains. Edelbrocknitrous calibrations are determined through engine dyno test-ing. Edelbrock Nitrous Systems are available for up to 250+HP gains in carbureted engines. Check out these advancedfeatures: • Larger Bottle Valve Included with Performer &Performer RPM Systems • Detailed Instructions • Precision-Machined Stainless Steel Solenoids • Stronger Micro-Switch &Solenoid Brackets • CNC-Machined Stainless Steel Jets •Heavy-Gauge Steel Bottle Brackets • Heavy-Gauge SiphonTube • Pre-Terminated Wiring Harness • Braided Steel TeflonFeed Lines • High-Quality, Powder-Coated Aluminum Nitrous Plate

Cheater™ 150-250HP Nitrous System

•Designed for use with 350c.i.d. and larger displacement• These systems can beadjusted from 75 to 250 extrahorsepower by changing thenitrous and fuel jets 02001 CHEATER 150-250HP, V8 Holley 4bbl./CarterAFB (late) . . . . .$469.99

1-1/2” Fuel andNitrous Gauges

15910 Nitrous Pressure Gauge . . . . . . .$39.994AN Adapter

15900 Fuel Pressure Gauge . . . . . . . . . .$34.99Standard 0-15lb.

15906 EFI Fuel Pressure Gauge . . . . . . .$34.990 to 120 psi

Microswitch &BracketDesigned especially for Edelbrockand Holley carburetors, these kitsinclude a CNC-machined,anodized billet aluminum bracket.

72280 For EdelbrockPerformer Series carbs . . . . . . . . . . . . . . . . .$25.9972281 For 4500 Series carbs . . . . . . . . . . .$25.9972282 For Holley standard-flange carbs . . .$29.9972284 For Barry Grant Race Demon carbs .$29.9972285 For Barry Grant King Demon carbs .$29.99

Nitrous Bottle HeaterConsistent bottle pressure (900 to 950 PSI) is veryimportant for proper operation of your nitrous sys-tem. The Edelbrock nitrous bottle heater thermostat-ically raises the pressure when necessary by applyingheat to the bottle.

10-lb./15-lb. Bottle Heater....72700 ..$114.99

Nitrous/Fuel Taper Face JetsA full compliment of Edelbrock stain-less steel nitrous oxide and fuel taperface jets are available in virtually anysize for your power and tuning

requirements. To order individual jets, simply addthe jet size desired to #73. For example: #73014 isa .014" jet.

Nitrous/Fuel Taper Face Jets (use jet size desired as last three digits)

730XX .....................................................$4.99

Nitrous/Fuel Taper Face Jet KitsPerformer Replacement Kit

(3 Steps) ..............................73001 .....$11.99Performer RPM Replacement Kit(5 Steps) ...................................73002 .....$20.99Master Tuner Taper Face Jet Kit 328 Jets...............................73003...$699.99Race Tuner Taper Face Jet Kit 216 Jets...............................73004...$539.99Street Performance Taper Face Jet Kit 80 Jets.................................73005...$227.99

Purge Valve KitKeeps the supply of fresh nitrous at the solenoid(s)

for instant and repeatable nitrous injection by

bleeding the accumulated nitrous vapor from the

supply lines. Includes purge solenoid, activation

switch, filter, aircraft quality fittings and wiring.

-4 AN Purge Valve Kit......72176........ $97.99

Nitrous System PressureGaugesNitrous System mechanical pressure gauges are animportant element in maximizing and tuning yournitrous system. The 1-1/2" gauges may be fittedonto a nitrous bottle or just in front of the nitroussolenoid. A high-quality engineered mechanismprovides durability and accuracy. Braided stainlesssteel lines are recommended for high-pressure appli-cations. Comes with all necessary adapter fittings.

1-1/2" Pressure Mechanical GaugesNitrous Pressure 0-1400 PSI .......73800.....$39.99Glycerin-Filled Nitrous Pressure 0-1400 PSI .................................73801.....$49.99Fuel Pressure 0-100 PSI .............73825.....$34.99Glycerin-Filled Fuel Pressure 0-100 PSI ...................................73826.....$51.99Fuel Pressure 0-15 PSI ...............73831.....$37.99Glycerin-Filled Fuel Pressure 0-15 PSI .....................................73832.....$51.99

73825 1-1/2" Fuel Pressure

73800 1-1/2" Nitrous Pressure

NitrousBottlesAll Edelbrock alu-minum nitrous stor-age bottles areD.O.T. approved. Ina variety of sizes tosuit your needs, allbottles are powder-coated sil-ver or polished and come with a CGA approvedvalve with a built-in siphon tube. They alsoinclude a pre-installed pressure/temperature vent-ing system in case your bottle is overfilled or ifpressure increases beyond the maximum safetylevel. Note: All nitrous bottles are shipped empty.10-lb. Powder-Coated Aluminum Bottle

...................................72300 ...$199.9910-lb. Polished Aluminum Bottle

...................................72400 ...$239.9910-lb. Powder-Coated Alum.

Bottle w/Gauge ..........72301 ...$228.9910-lb. Polished Alum.

Bottle w/Gauge ..........72401 ...$274.9915-lb. Powder-Coated

Aluminum Bottle .........72316 ...$239.9915-lb. Polished Aluminum Bottle

...................................72416 ...$299.9915-lb. Powder-Coated Alum.

Bottle w/Gauge ..........72317 ...$274.9915-lb. Polished Alum.

Bottle w/Gauge ..........72417 ...$329.99

Nitrous BottleBracketsPowder-coated red,these brackets aredesigned for 10/15-lb. alu-minum bottles and may be used on other 7" diam-eter nitrous bottles.

72600 . . . . . . . . . . . . . . . . . . . . . . . .$39.99

Performer System(from 50-100 HP)

Standard-flange carbs . . .70001 . .$349.99Spread-bore carbs . . . . .70002 . .$349.99

Performer RPM System (from 100-250 HP)

Standard-flange carbs . . .70050 . .$439.99Spread-bore carbs (from 100 to 175 HP) . . .70051 . .$439.99For 4500 Series carbs . . .70053 . .$439.99

SniperTM Nitrous SystemThe Sniper is a fullyadjustable system that isdesigned to provide from100-150+ extra horsepowerin popular 4 bbl square boreor spread bore applications.07001NOS $379.99

Sport CompactNitrous SystemNOS has developed safe,reliable and highly effectivekits that produce from 40 to60 hp for a large number ofapplications. Most of theseemploy “dry” injection tech-nology, where the OEM fuelinjection provides the

required additional fuel to the motor only whenthe nitrous system is armed and activated at wideopen throttle.05122NOS 1.5L-2.3L Dry Manifold Kit

. . . . . . . . . . . . . . . .$499.99

FITS OTHER

SYSTEMS!

*Nitrous Oxide refills available at our local store - Motor Parts Central - 801 Lewis Blvd., Sioux City, IA - 712-252-1813NOTE: WE CANNOT SHIP FILLED NITROUS OXIDE BOTTLES


Sport

Com

pact


061120 94-02 Chevrolet S-10 . . . . . . . . . . . . . . . . . . . . .$129.99061420 97-02 Ford F150 . . . . . . . . . . . . . . . . . . . . . . . . .$139.99064420 97-03 ford F150 Flareside . . . . . . . . . . . . . . . . . .$199.99065220 97-02 Ford Expedition . . . . . . . . . . . . . . . . . . . . .$219.99065320 01-03 Honda Civic Ring Of Light . . . . . . . . . . . . .$219.99

921 Xenon Crystal White (pair)Fat Peanut Bulb 18W . . . . . . . . .$4.99

3022 Xenon Crystal White (pair)Small Dome Light Bulb . . . . . . . .$6.99

3175 Xenon Crystal White (pair)Large Dome Light Bulb . . . . . . . .$6.99

7440 Xenon Crystal White (each)Fat Wedge Bulb Single Filamen . .$4.99

7443 Xenon Crystal White (each)Fat Wedge Buld Dual Filamen . . .$4.99

7443XR Xenon Crystal Red (each)Fat Wedge Buld Dual Filamen . . .$4.99

89 Mini Bayonet Xenon Crystal White (each) . . . . .$6.99

1156 Single Filament Boyonet 27WXenon Crystal White (each) . . . . .$4.99

1156L Single Filament Bayonet Red L.ED. .$8.991157L Dual Filament Bayonet Red L.ED. . .$8.991157XR Dual Filament Bayonet

35/5W Xenon Red (pair) . . . . . . . . .4.99

10110 Red . . . . . . . . . . . . . . . . . . . . . . .$14.9910120 Clear . . . . . . . . . . . . . . . . . . . . . .$14.9910137 Green . . . . . . . . . . . . . . . . . . . . .$14.9910180 Blue . . . . . . . . . . . . . . . . . . . . . .$14.99

Eurolite taillight assemblies add a european look tomost any vehicle. These lights are definitely the wayto go when searching for a custom exterior look.Designed to replace O.E. taillight assemblies withoutmodification.

This flashing LED light kits are specially designed to function intwo unique ways. They can be added to your existing alarmsystem or be operated by switch. These lights can be installedin your headlamps, corner lights, or just on your dash, the keyis to deter theft.

Replacement and LED Bulbs

881LXC 32W Xenon Blue Fits 889,894,896 . . . . . .$16.99893LXC 37.5W Xenon Blue Fits 880,884,890,899 .$16.999004HXC 100/80W Xenon Blue . . . . . . . . . . . . . . .$18.999004LXC 100W Xenon Blue . . . . . . . . . . . . . . . . . .$16.999005HXC 65/55W Xenon Blue . . . . . . . . . . . . . . . .$18.999005LXC 65W Xenon Blue . . . . . . . . . . . . . . . . . . .$16.999006HXC 80W Xenon Blue . . . . . . . . . . . . . . . . . . .$18.999006LXC 55W Xenon Blue . . . . . . . . . . . . . . . . . .$16.999007HXC 100/80W Xenon Blue . . . . . . . . . . . . . . .$21.999007LXC 65/55W Xenon Blue . . . . . . . . . . . . . . . .$18.99893LXC 37.5W Xenon Blue Fits 880,884,890,899 .$16.99H1HXC 100W Xenon Blue . . . . . . . . . . . . . . . . . .$16.99H1LXC 55W Xenon Blue . . . . . . . . . . . . . . . . . .$15.99H3HXC 100W Xenon Blue . . . . . . . . . . . . . . . . . .$16.99H3LXC 100W Xenon Blue . . . . . . . . . . . . . . . . . .$15.99H4HXC 100/80W Xenon Blue . . . . . . . . . . . . . . .$18.99H4LXC 65/55W Xenon Blue . . . . . . . . . . . . . . . .$16.99H7HXC 100W Xenon Blue . . . . . . . . . . . . . . . . . .$21.00H7LXC 55W Xenon Blue . . . . . . . . . . . . . . . . . . .$18.99

9004DP 12V 65/45W . . . . . . . . . . . . . . . . . . . . . . .$28.99H4DP 12V 65/45W . . . . . . . . . . . . . . . . . . . . . . .$28.99H7DP 12V 55W . . . . . . . . . . . . . . . . . . . . . . . . . .$24.99

9004SB 12V 65/45W . . . . . . . . . . . . . . . . . . . . . . .$28.99893LXC 37.5W Xenon Blue Fits 880,884,890,899 . . .$15.999005SB 12V 65W . . . . . . . . . . . . . . . . . . . . . . . . .$24.999007SB 12V 65-55W . . . . . . . . . . . . . . . . . . . . . . .$28.99H4SB 12V 65/45W . . . . . . . . . . . . . . . . . . . . . . .$28.99H7SB 12V 55W . . . . . . . . . . . . . . . . . . . . . . . . .$24.99

Xenon charged replacment bulbs match the brilliance, sparkle and clarity of HID lighting systems. They reduce eyestrain and increase safety beyond conventional halogen bulbs

LXC Series Headlight Bulbs

Fusion Series light bulbs produce a bright whitebeam of light that contains a hint of blue, thissimulates the HID look of most late modelEuropean vehicles.

SB Series Headlight Bulbs

Super Plasma DOT/SAE approved version that has achievedthe 30% greater Lumen output while producing an intensewhite beam.

DP Series Headlight Bulbs

TF1600 2 In 1 Driving Lamp Crystal White . . . . . . . . . . . . . .$69.99TF1620 2 In 1 Driving Lamp Clear . . . . . . . . . . . . . . . . . . . .$69.99

This tear drop shaped driving light is designed to fit into thetightest oval shape opening in late model vehicle bumpersand body kits. The TF1600 has the option to configure the highintensity LED into a turn signal or marker light. The T-304 stainless steel bracketand die-cast aluminum housing make this light as durable as it is good looking.

2 In 1 Driving Lamp

TF1400 Micro Spot Lamp Silver Housing . . . . . . . . . . . . . . .$59.99

The metallic silver and polished chrome trim set this lightabove all others in it’s class. Designed to fit in the lowervalance of most late model vehicles, this light is a practical and functional addition.

Micro Spot Lamp

High Intensity Dual Alarm LED’s

Tail Lamps

NG203 6” Dual Mini Neon Rods (Purple) . . . . . . . .$21.99NG206 9” Dual Mini Neon Rods (Red) . . . . . . . . . .$24.99NG426BL Neon Under Car Kit (Blue) . . . . . . . . . . .$119.99NG426PP Neon Under Car Kit (Purple) . . . . . . . . . .$119.99NG52608BL 8” Self Contian Neon Glow Rod (Blue) . .$24.99NG9020 Elite Series Neon Under Car Kit (White) . .$169.99NG9080 Elite Series Neon Under Car Kit (Blue) . . .$169.99

Neon Lighting

Sport C

om

pact

95

H020SL 97-01 Acura Integra Front Upper Type R Polished . . . . . . .$109.99H021SL 90-96 Acura Integra/92-95 Honda Civic Front Upper

Type R Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.99H031BA 01-03 Honda Civic Front Upper Type 8 Polished . . . . . . . . . .$34.99H050SL 02-03 Acura RSX Front Upper Type R Polished . . . . . . . . . .$149.99

SF007BL Blue Shield . .$36.99SF007RD Red Shield . . .$36.99SF007YL Yellow Shield .$36.99

SF400BL Blue . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99SF400GR Green . . . . . . . . . . . . . . . . . . . . . . . . .$36.99SF400RD Red . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99SF400YL Yellow . . . . . . . . . . . . . . . . . . . . . . . .$36.99

Part No.Inlet Diam.Outlet Diam.Outlet Style Body Len.Overall Len.Cross Sec.Shape PriceMT602 2-3/8” 4” Fireball Tip 15” 19-1/2” 4-3/4” Round $169.99MT603 2-3/8” 4” Fireball Tipw/ silencer 16” 20” 5-1/4” Round $169.99MT603C 2-1/2” 3-1/2” Fireball Tipw/ silencer 15-1/2” 19-1/2” 5-1/4” Round $179.99MT610 2-3/8” 4-1/2” Straight Cut 13” 21-1/4” 5-1/4” Round $119.99MT614 2-3/8” 4” T-814 Tip 12-1/2” 20-1/2” 5-1/4” Round $119.99MT630 2-1/2” 3” Flame Treated 12” 19-1/2” 5-1/4” Round $129.99MT634 2-3/8” 4-1/2” Slash Cut Tip 14” 24” 6” x 8” Oval $109.99MT636 2-3/8” 4” Slant Cut Bull Nose 14” 17” 6” Round $139.99MT638 2-3/8” 4-1/2” Beveled Slash Cut Tip 14” 24” 6” x 8” Oval $109.99

TP310 Silver/Carbon Fiber Manual . . . . . .$14.99TP310A Silver/Carbon Fiber Automatic . . . .$14.99TP312RD Red/Black Rubber Manual . . . . . . .$14.99TP312ARD Red/Black Rubber Automatic . . . . .$14.99TP701BK Graphite/Black Manual . . . . . . . . . .$22.99TP701ABK Graphite/Black Automatic . . . . . . . .$22.99TP701AYL Graphite/Yellow Automatic . . . . . . .$22.99TP701YL Graphite/Yellow Manual . . . . . . . . .$22.99TP701BK Graphite/Black Manual . . . . . . . . . .$22.99TP701BL Graphite/Blue Manual . . . . . . . . . .$22.99TP701RD Graphite/Red Manual . . . . . . . . . .$22.99TP702A Chrome/Black Automatic . . . . . . . .$22.99TP703ABK Brushed Aluminum/Black Manual . .$22.99TP703ABL Brushed Aluminum/Blue Automatic .$22.99TP703ARD Brushed Aluminum/Red Automatic .$22.99TP703AYL Brushed Aluminum/Yellow Automatic$22.99TP703BK Brushed Aluminum/Black Manual . .$22.99TP703BL Brushed Aluminum/Blue Manual . .$22.99TP703RD Brushed Aluminum/Red Manual . . .$22.99

These are constructed from tubular 6061 T-6 aircraft aluminum, which has a highstiffness to weight ratio. Tighter fitting tolerance are possible due to a more compact design, which allows greaterclearances from engine components.

The conical cotton element filterdesign combined with a heat shieldhas been dyno tested, improving per-formance with higher HP. and signifi-cantly better bottom end torque. Thefilter will fit any 3” diameter pipe.

Stainless Steel & Carbon Fiber Mufflers With Tips

Manual & Automatic Pedal Sets

This filter combines a large surface area foam element with abuilt in velocity stack to increaseairflow. Dyno-tested showingincreased bottom end torque andincreased HP. at higher RPM. Thefilter will fit on any 3” diameterpipe.

Foam Mushroom Air Filter (3”/76mm Neck)

SF300YL Yellow Shield . .$39.99

The filter combines a conical design with a heatshield improving performance with higher HP.and more significantly better bottom end torque.The filter will fit on any 3” diameter pipe.

SF100BL Blue Shield . . . . . . . . . . . . . . . . . . . . . . .$19.99SF100RD Red Shield . . . . . . . . . . . . . . . . . . . . . . .$19.99

Super Flow Premium Filters (3”/76mm Neck)

Upper Strut Tower Bars

MT603CMT602 MT603

100110 Stainless Tip with Red L.E.D. lights Slant Cut . . . . . . . . . . .$69.99

100210 Stainless Tip with Red L.E.D. lightsOval Rolled End . . . . . .$59.99

100310 Stainless Tip with Red L.E.D. lightsRound Rolled End . . . . .$59.99

Performance StainlessSteel Exhaust

Heat Shield Filter (3”/76mm Neck)

The Superflow Air Intake System comescomplete with quality aluminum pipe, filter, hoses, stainless steelclamps and bracket.

SFA9093 90-93 Honda Accord Polished . . . . . . .$55.99SFC8891 88-91 Honda Civic Si Polished . . . . . . .$59.99SFC9295 92-95 Honda Civic Polished . . . . . . . . .$55.99SFC9697E 96-97 Civic EX/HX/Si/SIR Polished . . . . .$55.99

Translucent Heat Shield Filter(3”/76mm Neck)

Airflow Intake System

The filter combines a cotton fiber ele-ment with stainless steel mesh structurein a conical design, improving perform-ance by increasing bottom end torqueand overall horsepower. The filter will fit any 3” diameter pipe.


96

Fuse Blocks12-Circuit Compact Universal Fuse BlockThis OEM style pre-wired fuse block can be used toreplace your existing fuse block or as a starting pointfor custom wiring. All you have to do is terminate yourcircuit wire and attach it to the fuse block. Pre wired

and labeled for the following circuits: Air conditioning/heat, Gauges/dashinstruments, Brake Lights, Headlights, Coil, Horn, Dome Light, Radio,Electric Fan, Turn Signals, Emergency Flashers, and Wipers. Kit includes:mounting bracket, fuses, flashers, horn relay, terminals, and full instructions.30001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$88.99

Universal ChassisWiring Harnesses12-Circuit Universal/GM SteeringColumn Our 12 Circuit kits can be used in just aboutany vehicle where basic wiring is needed. This

kit includes the GM (column mounted) ignition switch plug and the GM(column mounted) turn signal switch plug pre-terminated and ready toinstall.10101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$265.9912-Circuit Universal HarnessDesigned to be used on any vehicle that needs up to 12 Circuits. This kitdoes not include the GM column mounted ignition switch plug but includesthe GM column mounted turn signal switch plug.10102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$254.99

18 Circuit Universal Harness GMsteering columnThese kits have it all... everything a moderncar uses. If you need more than the basic12-circuit wiring harness then this is youranswer. Includes: The GM column mount-

ed ignition switch plug and the GM column mounted turn signal switchready to plug in. Also has pre-wired plugs for headlight connector and dim-mer switch.10201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.99

18 Circuit Universal HARNESSThe 18-Circuit kit allows you to add accessories to the basic wiring such aselectric windows, door locks, stereo equipment, etc. This kit does notinclude the GM column mounted ignition switch plug but includes the GMcolumn mounted turn signal switch plug.10202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$281.99

Custom/Classic WiringHarnesses 1967-68 Camaro/FirebirdOur basic18-Circuit kit is modified to include cus-tom features for this very popular year of theCamaro and Firebird. A pre-wired factory bulk-

head connector hooks up to the fuse block through the firewall in the stocklocation. Easy-to-install, factory original, quick connect terminals are pre-wired to plug into the in-dash printed circuit board. Pre-terminated wires forthe turn signal switch are included.20101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$335.99

1969-74 GM MUSCLE CARSOur basic18-Circuit kit is modified to include custom features to make it easi-er to wire your GM Muscle car. A pre-wired factory bulkhead connectorhooks up to the fuse block through the firewall in the stock location. Easy-to-install, factory original, quick connect terminals are included for the in-dash printed circuit board. Pre-terminated plugs for the ignition and turn sig-nal switches are included. Fits: ë69-í74 Camaro, Firebird, Nova, Apollo, Chevelle, Cutlass,Skylark, Tempest and GTO.20102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$419.99

Fan-Thom II Electric FanRelay with ThermostatProtectionNo Need for unsightly probes into the radiator. The Fan-Thom II comes with a threaded thermostatthat screws into the engine block or manifold for a

professional installation. Thermostat thread size: 3/8î-18NPTF fitting.30102 200° On/185° Off . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.9930103 185° On/170° Off . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99

Fuel Injection Wiring HarnessesGM 87 & later tbiFor use with all 1987 and later GM throttle bodyengines: 4.3L, 5.0L, 5.7L, 7.4L60101 . . . . . . . . . . . . . . . . . . . . . . .$261.99

GM 86-89 TPI Mass AirFor use with TPI systems using a MAF sensor or Mass Air Flow System onGM 5.0L and 5.7L V8s. Painless computer chip or VATS module required. 60102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$295.99GM 90-92 TPI with speed densityFor use with TPI systems using a MAP sensor or Speed Density System onGM 5.0L and 5.7L V8s. Requires the use of either a Painless computer chipor VATS module.60103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$298.99

700R4 TransmissionTorque Converter Lock-up Kit

Now you can control the lockup converter on your overdrive transmissionwith your carbureted engine and not have to buy an expensive computer!With our easy to install Lock-Up Kit you donít need the computer or speedsensor. A vacuum controlled 4th gear pressure switch/lock up solenoid com-bination controls the lockup. Comes with everything to complete the jobincluding a pan gasket. Fits any 700R4 GM transmission.60109 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.99

Mustang Toggle SwitchPanel Mounts in radio/stereo location of 1987-93 5.0LMustangs. Kit includes six colored LEDs, six heavy

duty on/off toggle switches, one each of momentary and on/off/on switch-es color -coded TXL wire and peel and stick labels for custom wiring.50421 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.99

18-Circuit Fuse BlockThis OEM style pre-wired fuse block can be used toreplace your existing fuse block or as a starting point forcustom wiring. Includes standard circuits such as head-lights, tail lights, gauges, etc., plus additional circuits towire power window, door locks, and optional accessories. 30003 . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.99

RF Control CenterMaybe you don't have a place on the dash or steeringcolumn for switches to turn on headlights, turn signalsor emergency flashers. Or cruise control. Or operate a

winch. Or fog lights. The list is endless. The Painless RF Control Center solvesthe problem many street rodders, hot rodders and four wheel drive enthusi-asts constantly face: where to mount all the necessary switches? The RFControl Center consists of a user-programmable transmitter which sendsradio frequency signals to a use-programmable receiver, which in turn out-puts the signal to a relay to operate the desired accessory. The four buttontransmitter - which can be programmed to operate up to six accessories -mounts easily in the steering wheel in place of the horn button. 20308 5 Hole Brushed for Grant w/Relays . . . . . . . . . . . . . .$279.9920310 5 Hole Polished for Grant w/Relays . . . . . . . . . . . . . .$295.99

Mustang Nitrous Hide-A-PanelThis ashtray mount panel is ideal for 5.0L racerslooking to conceal their nitrous capability. Includesthree lighted on/off rocker switches and onemomentary switch for purge function. Comes fullyassembled and complete with mounting hardware. Fits 1987-97 5.0L Mustangs.50422 . . . . . . . . . . . . . . . . . . . . . . . .$69.99

Wir

ing

Vid

eo, So

ftware

, Man

uals &

Appare

l

97

Northern Auto Parts T-shirtsGet Northern’s New T-shirt with our Hot RodTurtle on the back and our name on the frontleft crest. The t-shirts are white and 100%preshrunk cotton. These are just too cool tomiss out on! Large, XLarge, XXL, XXXL

$14.99

Northern AutoFender CoversQuality Fender Covers. Protect your vehicle from oil,dirt, dents and scratches during mechanical repairs.PR1217 . . . . . . . . . . . . . . .$12.99 each

Dragstrip 2000Drag Racing simulation for Windows 95/98/NT/2000 The DragStrip2000 accurately predicts ETs and speeds; determines best gearing, shiftpoints, and much more! Test and optimize cars (street or race), motor-cycles, and dragsters.

3646 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.99

Rebuild & PowerTuning VideosThis tape shows you in clear easy to understand, over theshoulder instruction, how to re-build, repair and powertune a Holley® four barrel carburetor and Quadra-Jet fourbarrel carburetor. It will show you how to check important

components like the power valve, accelerator system and throttle shafts for properfunctioning. There is coverage of after market parts, tools and accessories you canuse to get the maximum performance and responsiveness from your carburetor. Italso covers on-vehicle setup and mixture adjustment for that perfect blend of per-formance and economy.269845 Holley Four Barrel Carburetor . . . . . . . . . . . . . . . . .$24.99269846 Quadra-Jet Four Barrel Carburetor . . . . . . . . . . . . .$24.99

Power Porting VideoThis video is a must for the performance enthusiast. We have takenthe “black art” out of cylinder head porting by illustrating it in simple,concise terms. With a few tools, anyone can measurably increase thepower and efficiency of their engine. The instruction is given usingcomputer animation and live over-the shoulder demonstration.269824 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $15.99

SA02 The Complete Do-It-Yourself Guide to Super Power .$18.99SA05 Ford Performance . . . . . . . . . . . . . . . . . . . . . . . . .$18.99SA06 Smokey Yunick's Power Secrets . . . . . . . . . . . . . . . .$18.99SA07 Small Block Chevy Performance - Vol. 1 . . . . . . . . . .$18.99SA08 Super Tuning and Modifying Holley Carburetors . . .$18.99SA10 The Do-It-Yourself Guide to Custom Painting-Revised $18.99SA11 Super Tuning and Modifying Carter Carburetors . . . .$18.99SA13 V-6 Performance . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99SA14 Small Block Chevy Performance - Vol. 2 . . . . . . . . . .$18.99SA17 Street Supercharging . . . . . . . . . . . . . . . . . . . . . . .$18.99SA21 Step-By-Step Guide to Engine Blueprinting . . . . . . . .$18.99SA23 Guide to Bolt-On Street Power . . . . . . . . . . . . . . . .$18.99SA24 How To Build Horsepower - Vol. 1 . . . . . . . . . . . . .$18.99SA26 How To Build Small Block Chevy . . . . . . . . . . . . . . .$18.99SA27 Holley - Rebuilding and Modifying . . . . . . . . . . . . .$18.99SA29 The Do-It-Yourself Guide to Sport Trucking . . . . . . . .$18.99SA30 Performance Modifying Chevy Trucks . . . . . . . . . . .$18.99SA31 Chevrolet Big Block Parts Interchange Manual . . . . .$18.99SA32 High Performance Crate Motor Buyer's Guide . . . . .$18.99SA45 How To Design and Install High Perf Car Stereo . . . .$18.99SA46 How To Build a Lowrider . . . . . . . . . . . . . . . . . . . .$18.99SA48 How to Build Max Perf Chevy Rat Motors . . . . . . . .$18.99SA49 High Performance Honda Builder's Handbook -

Vol. 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99SA50 Nitrous Oxide Injection Guide . . . . . . . . . . . . . . . . .$18.99SA51 DeskTop Dynos (Book) . . . . . . . . . . . . . . . . . . . . . .$18.99SA52 How To Build Horsepower - Vol. 2 . . . . . . . . . . . . .$18.99SA53 Chevy TPI Fuel Injection Swapper's Guide . . . . . . . .$18.99SA54 5.0L Mustang Bolt-ON Performance Guide . . . . . . .$18.99SA55 Chevrolet Small Block Parts Interchange Manual . . . .$18.99SA56 Ford Engine Parts Interchange Manual . . . . . . . . . .$18.99SA57 Build Max Performance Chevy Small Blocks

On a Budget . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99SA58 High Performance Honda Builder's Handbook -

Vol. 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99SA59 Camaro Bolt-On Performance Guide . . . . . . . . . . . .$18.99SA60 Chrysler Performance Upgrades . . . . . . . . . . . . . . .$18.99SA61 5.0L Ford Dyno Tests . . . . . . . . . . . . . . . . . . . . . . .$18.99SA62 Engine and Chassis Detailing . . . . . . . . . . . . . . . . .$18.99SA63 Official Factory Guide to Building Ford Short Track . .$18.99SA65 Sport Compact Bolt-On Performance Guide:

Vol. 1 Import Cars . . . . . . . . . . . . . . . . . . . . . . . . .$18.99SA67 How To Build High Performance Chrysler Engines . .$18.99SA68 Demon Carburetors . . . . . . . . . . . . . . . . . . . . . . . .$18.99SA69 How to Build Max Performance Ford V-8s

On A Budget . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99SA71 How to Build Honda Horsepower . . . . . . . . . . . . . .$18.99SA73 Sport Compact Nitrous Injection . . . . . . . . . . . . . . .$18.99

Race Block PrepBlueprinting for PowerVideoRace Block Prep is your guide to a stronger, more reli-able and powerful engine! This tape will show youmoney saving tips for better engine oil flow, protection

against debris contamination, flash removal and many more impor-tant steps. You will learn how to perform the tasks the pros do inpreparing a durable engine block that is capable of extreme output.All of this with a minimum of tools, at a cost that is considerable lessthan having a shop do the work. If you want an engine that is raceprepared, then this tape is for you.

269847 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.99

Dyno 2000Advanced engine simulation for Windows 95/98/NT/2000The Dyno 2000 is the most powerful and accurate engine simulationever developed for your PC! Build and test virtually any 1 to 12 cylinderengine for street or racing applications. Incorporates breakthroughIterative Testing that locates the best parts combinations, automatically.3626 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.99

Piston Rod Key ChainPF31001 . . . . . . . . . . . . .$3.99

DecalsGet Northern’s decal with our Revved Up Hot RodTurtle. Stick them on your cars, toolboxes, and windows. The decals are clear and are 4” x 5”.

$1.60

Buy An Engine Kit & Get AFender Cover For Only $9.99!

FREE FREIGHT on your Car Tech Book order when you order 2 or more!or $5.00 freight discount on any order

when 2 Car Tech books are added on to your order.

NEWFREE FREIGHT

PROGRAM


98

Con

ten

ts

FFFFrrrreeeeeeee FFFFllllyyyyeeeerrrr OOOOffffffffeeeerrrr ####77770000If you are not currently on our mailing list and would like to be,just send your

Name:______________________________________________________________

Address: ____________________________________________________________

City/State/Zip: ______________________________________________________

Area Code and Phone: ________________________________________________

E-Mail Address: ______________________________________________________

To: Northern Auto Parts Warehouse, Inc.P.O. Box 3147

Sioux City, IA. 51102-3147

Methods Of Shipment

Minimum Order For C.O.D. $25.00

Service and SalesOrders - Orders may be placed by calling our phone representatives, faxing ore-mail. Always be sure to include your phone number.

Shipping and Handling - Shipping and handling charges will be added toall orders. The freight amount will depend on weight and distance. Air freightis available on charge card orders only. All claims for shortages must be madewithin 10 days of receipt order.

Drop Shipping - is allowed on charge card orders only and all manufacturersspecial handling fees apply.

Cores - All cores must be returned to Northern Auto Parts at 801 Lewis Blvd.,Sioux City, Iowa 51105 freight prepaid. The manufacturers require that coresare returned in original boxes. Cores must be rebuildable and not damaged,broken, disassembled or have missing pieces. All returns must have a copy ofsales receipt and an explanation.

Returns - New returns must be shipped to Northern Auto Parts at 801 LewisBlvd., Sioux City, Iowa 51105 freight prepaid. Only New, unused parts will beaccepted for refunds. All new returns are subject to a 15% restock charge after90 days. All returns must have a copy of sales receipt and an explanation.

Refunds - Refunds from charge card orders are credited to the same cardnumber that the purchase was made. Refunds from COD orders will be mailed30 days from original purchase date.

C.O.D. - C.O.D. “CASH ONLY” Orders must be paid by money order or certi-fied check ONLY. UPS and Federal Express will no longer accept currency.

Catalog Errors - Northern is not responsible for typographical errors. Allprices are subject to change without notice. Some High Performance ProductsNot Legal for Sale or Use in Pollution Controlled Vehicles.

Your Delivery Time from Northern Auto Parts Ranges from 1 to 5 Days,Depending on your Delivery Area.

Add an Additional 1 to 2 Days on Rural Addresses.

CALL TOLL FREE1-800-831-0884

8-8 Monday thru Thursday, 8-6 Friday

8-4 Saturday CST24 Hour Fax 1-712-258-0088

E-Mail to: [email protected]

Shop Our Web Page!

C.O.D.

Contents

Mustang Page 2-3

Chevy S-10 Page 4

Chrysler Page 5

New Products 6-7

Engine Kits 8-11

Camshafts, Valvetrain & Accessories 12-23

Crankshafts & Connecting Rods 24

Balancers & Timing 25-27

Oil System 28-29

Bolt Kits, Studs & Fasteners 30-31

Transmission & Rearend 32-39

Gaskets 40-41

Cooling & Heating 42-48

Ignitions, Electric & Hypertech 49-55

Air & Fuel 56-63

Dress Up 64-68

Gauges 69-72

Paint & Chemical 73

Chassis, Brakes & Steering 74-77

Exhaust & Hoses 78-81

Tools 82-88

Truck & Accessories 89-92

Nitrous 93

Sport Compact 94-95

Wiring 96

Videos, Manuals, Software & Apparel 97

Bulk Sales Page 99

Visit Our Retail Store801 Lewis Blvd.

Sioux City, IA 511058-6 Monday thru Friday

8-4 Saturday 10-4 Sunday

1-712-252-1813

motorpartscentral.com


Bulk

Sale

s Page

99

PushrodsPurchase high quality Sealed Power stock replacement pushrods in bulk andsave big! Box of 100 for only $59.00 - that's only .59 cents apiece!

RP5015R Min. Purchase of 100 - Sealed Power Stock Repl. . . . .79 ea.RP5015R Min. Purchase of 500 - Sealed Power Stock Repl. . . . .59 ea.

Stock Valve SpringsRV880X Min. Purchase of 100 - Elgin Stock .440 Max Lift . ..49 ea.RV943X Min. Purchase of 100 - Elgin Perf. .490 Max Lift . ..99 ea.

Bulk Valve Spring Inserts (Shims).060 ThickA203-100 Per-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.00

.030 ThickB203-100 Per-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.00B203hp-50 Hardened Per -50 . . . . . . . . . . . . . . . . . . . . .$31.00

.015 ThickC203-100 Per-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.00C203hp-50 Hardened Per-50 . . . . . . . . . . . . . . . . . . . . . .$31.00

Bulk Nitrile ValveStem SealsOS240B-1000 Stock Nitrile O-Ring Per-1000 . . . . . . . . . . . .$20.00OS450-100 Stock Nitrile Umbrella Per-100 . . . . . . . . . . .$18.00OS1054-100 Optional Nitrile- Umbrella w/Teflon Insert

& Tension Ring Per-100 . . . . . . . . . . . . . . . .$94.00

SMALL BLOCK CHEVYBULK PRODUCTS

BIG

Bulk Valve Guides05607-100 Cast Iron .341 Dia. Valve Per-100 . . . . . . . .$149.0005005B-100 Bronze .341 Dia. Valve Per-100 . . . . . . . . .$237.00

Bulk Press-In StockRocker Arm Studs

RM347-100 3/8” Nut Per-100 . . . . . . . . . . . . . . . . . . . . .$56.00RM347A-100 3/8” Nut with .003 O/S Per-100 . . . . . . . . . .$66.00

Screw-In Rocker Arm StudsRM348-100 3/8” Nut and 7/16”-14 Bass Per-100 . . . . . . .$49.00

Harmonic Balancer RepairSleevesHB4121 Min. Purchase of 12 . . . . . . . . . . . . . . . . . . . . . . .$2.99

Rod Bearings2555CP Min. Purchase of 48 - Federal Mogul . . . . . . .$1.69 ea.2555CP10 Min. Purchase of 48 - Federal Mogul . . . . . . .$1.69 ea.

Main Bearings4663M Min. Purchase of 12 - Federal Mogul . . . . . .$17.99 ea.

Cam Bearing Set1235M Min. Purchase of 12 - Federal Mogul . . . . . .$11.99 ea.

Oil Pumps Box SetsM55 Min. Purchase of 8 - Melling Stock . . . . . . .$11.99 ea.M55HV Min. Purchase of 8 - Melling High Volume . .$18.99 ea.

GasketsKS2600 Min. Purchase of 6 - Fel-Pro . . . . . . . . . . . .$29.99 ea.953033VR Min. Purchase of 6 - Victor/Reinz . . . . . . . .$21.99 ea.

Pistons - Stock Cast345NP Min. Purchase of 8 sets - Sealed Power . . . .$40.00 per set

(5.00 ea.)

Stock CamshaftsCS274 Min. Purchase of 6 - Sealed Power . . . . . . .$22.99 ea.

Pioneer

PRESORTEDSTANDARD

U.S. POSTAGE

PAIDNorthern Auto Parts

801 Lewis Blvd.P.O.Box 3147

Sioux City, Iowa 51102

350 Chevy Engine Kit $154.99302 Ford Engine Kit $199.99

See Pages 8 & 9

Edelbrock Beanies Made from an acrylic/cotton blend,these beanies have the Edelbrock logoembroidered on the front with silver flames. 23247 Gray $13.9923246 Red $13.99

Retro Tee100% cotton tee with the vintageEdelbrock Equipped logo on the back anda pin-striped Edelbrock logo on the front. 91232 Med. $9.9991233 Large $9.9991234 XLarge $9.9991235 2XLarge $12.9991236 3XLarge $13.99

Edelbrock Flamed Tee 100% cotton black tee with theEdelbrock flamed logo

on the front and back. 91212 Med. $13.9991213 Large $13.9991214 XLarge $13.9991215 2XLarge $15.9991216 3XLarge $16.99

Retro JacketThese stylish Black Retro Jackets aremade from 65% polyester and 35%cotton. Perfect for any hot rodenthusiast. Edelbrock Equipped logoon the back and a pin-stripedEdelbrock logo on the front.98702 Med. $64.9998703 Large $64.9998704 XLarge $64.9998705 2XLarge $69.99

Edelbrock Streamline CapsOrder all red with white accents or the red hatwith black bill and black accents. Both areembroidered with the 3/D Edelbrock script onfront and embroidered "E" on velcro adjusterstrap. 23244 Red hat w/white accents $12.998991 Red hat w/black bill & black accents $12.99

Edelbrock USA Flag CapRed twill cap with velcro strap. New Edelbrockflag logo on the front, Nascar logo on the sideand "The Fun Team" logo on the back. 23245 USA Flag Cap $9.99

Edelbrock Racing “E” CapBlack cap with a 3-dimensional Edelbrock "E".The unique flexseam styling looks like a fittedcap. Fits head sizes 6 3/4" to 7 3/8". 8992 Racing “E” Cap $15.99

Issue 70 - Northern Auto Parts

Documents

Transcript of Issue 70 - Northern Auto Parts