Equipment Solutions Catalogue JUNE 2021 - Nuturf

P H O N E : 0 2 9 8 2 7 1 3 1 1 F A X : 0 2 9 7 5 6 1 5 1 3

www.equipmentsolutions.com.au

Keeps your mowers razor sharp and 100% efficient

22” & 26” Pedestrian Cylinder Mower

For Bowls, Cricket, Tennis and Golf Greens

Fixed (FX) or floating head (FL) designLeading edge cut qualityInterchangeable cassettesCool and warm season grass compatibleOptional out front brush & weight kit availableLithum battery powerPerfect balanceLight weight

Photograph shows 22” Floating Head version

with optional out-front brush

Wimbledon

Neil Stubley - Head of Courts and Horticulture

“These are some of the most prestigious tennis courts in the world, so we want the best equipment to help us maintain championship performance. We’ve seen an improvement in the quality of the playing surfaces since we began using the INFINICUT® cylinder mower.”

NEW SOUTH WALES & TASMANIA ONLY

TURF MAINTENANCE

WHISPER TWISTERWHISPER TWISTER

Ideal for: golf courses, sports grounds and synthetic turf fields

Tractors from 22kW/30hp Cat. 1Dual hydraulic outlets requiredRear and outfront mountLeaf blower - whisper quietCat 1. 3 point hitch, PTO driven180 degree hydraulic rotating discharge nozzle

TERRA RAKETERRA RAKE 160 | TERRA RAKE 210


Tractors from 22kW/30hp Cat. 11.6m working width3 point hitch5 rows of vibrating steel tines dethatching at 8-12km/h travel speedOptions: weight transfer system, ballast weight, rear roller


Tractors from 18kW/25hp Cat. 1 & 01.8m working width3 point hitch or trailer optionOptions: trailer kit with draw bar, electric or hydraulic lift

TERRA BRUSHTERRA BRUSH


Tractors from 22kW/30hp Cat. 13.95m working width3 point hitch or trailer optionOptions: trailer kit with draw bar, electric or hydraulic lift

TERRA BRUSH WITH EXTENSION WINGSTERRA BRUSH

FL22 & FL26 - Dynamic Return Floating HeadThe use of a mower with a cutting unit independent of the traction unit (normally termed floating head) will decrease ground pressure as the combined weight of the mower is spread between both elements – traction unit and cutting unit.

ERGONOMIC DESIGNThe ergonomic, easily adjustable, handle allows for configuration to a comfortable operating position with all controls simple to operate.

VARIABLE CLIP RATEThe adjustable variable clip rate and forward speed adjustment system* results in a no compromise solution for sports turf maintenance.

BALANCED IN OPERATIONThe weight transfer to the cassette is limited because the collection bucket is mounted on the traction unit frame. The result makes the unit optimally balanced during operation and end-of-line turning, giving a more consistent height in use.

POWERPower is delivered by a lithium power source. Available in either 1.4kkWh or 2.8kkWh to drive the traction unit and the reel’s DC brushless motor. They can be quickly swapped, in-field if necessary, to suit the working environment. Engine option: Available as an option on FX (Fixed Head) versions.

ADJUSTABLE CHASSISFrom the on-the-fly wrenchless adjustment of the front roller height to the adjustable bedknife, the user can make further adjustments to maximize cutting efficiency no matter what the conditions.

Wrenchless Height AdjusterWrenchless Height Adjuster has become the industry benchmark for this type of application.

Low Ground PressureThe ground pressure of the unit is evened out over the rear roller and the two chassis rollers due to the floating head design.

Adjustable BedknifeAlteration of the bedknife geometry/attitude can compensate for bedknife face wear and offers consistency in the level of plant stress.

DETACHABLE WHEELSThe detachable wheels aid transportation over concrete approaches.

QUALITY REELIn-house designed and manufactured cutting reels available in 7, 11 and 14 blade set up. Optional single lever engage groomer attachment available to give a cutting height range of 1.8mm to 25mm (0.07in to 1in). The optional Groomer attachment contra rotates to achieve the maximum effect in alleviating grain and turf density problems. It has a fully sealed gearbox and is designed for single lever action to give simple engagement or disengagement and can be installed and removed in rapid fashion.

FRONT ROLLERCan either be specified as smooth, grooved or Wyle.

* Patents granted or pending.** The power testing information used to establish the power rating of these engines can be found at https://engines.honda.com/models/

Dedicated INFINICUT® trailer available for convenient transport of 22” model.

The InfiniApp™

TM

ADVANCED TURF TECHNOLOGY

Wireless connectivity via Bluetooth

34” Pedestrian Cylinder Mower

For Football, Baseball, Rugby, Sportsgrounds,Schools & Universities

Fixed (FX) or floating head (FL) designLeading edge cut qualityInterchangeable cassettesCool and warm season grass compatibleOptional out front brush & weight kit availableTrailed seat available for 34” modelLithum battery powerPerfect balanceLight weight30” width also available


TURF MAINTENANCE













Wembley Stadium

Karl Standley - Grounds Manager

“Three things really stand out for me with the INFINICUT® machines - one is the battery life; another is the versatility but perhaps the biggest thing is the balance. The floating head reads the pitch, every camber, every tiny movement and the whole team are very impressed by that and it shows in the quality of the finish.”


TURF MAINTENANCE













The InfiniApp™

TM



Chesterfield F.C.

Liam Reynolds - Head Groundsman

FL30 & FL34 - Dynamic Return Floating HeadThe use of a mower with a cutting unit independent of the traction unit (normally termed floating head) will decrease ground pressure as the combined weight of the mower is spread between both elements – traction unit and cutting unit.

Photograph shows 30” Fixed Head version

ERGONOMIC DESIGNThe ergonomic, easily adjustable, handle allows for configuration to a comfortable operating position with all controls simple to operate.

InfiniAppWorlds first professional mower with blue tooth connectivity via smartphone. Wirelessly modify settings and much more.

BALANCED IN OPERATIONThe weight transfer to the cassette is limited because the collection bucket is mounted on the traction unit frame. The result makes the unit optimally balanced during operation and end-of-line turning, giving a more consistent height in use.

POWERPower is delivered by a lithium power source. available in either 1.4kkWh or 2.8kkWh to drive the traction unit and the reel’s DC brushless motor. They can be quickly swapped, in-field if necessary, to suit the working environment. Battery: 48V LiFePO4 30Ah and 60Ah Engine option: Available as an option on FX (Fixed Head) versions.

ADJUSTABLE CHASSISFrom the on-the-fly wrenchless adjustment of the front roller height to the adjustable bedknife, the user can make further adjustments to maximize cutting efficiency no matter what the conditions.

Wrenchless Height AdjusterWrenchless Height Adjuster has become the industry benchmark for this type of application.

Low Ground PressureThe ground pressure of the unit is evened out over the rear roller and the two chassis rollers due to the floating head design.

Adjustable BedknifeAlteration of the bedknife geometry/attitude can compensate for bedknife face wear and offers consistency in the level of plant stress.


QUALITY REELIn-house designed and manufactured cutting reels available in 7, 11 and 14 blade set up. Optional single lever engage groomer attachment available to give a cutting height range of 10mm to 42mm (0.39in to 1.65in). The optional Groomer attachment contra rotates to achieve the maximum effect in alleviating grain and turf density problems. It has a fully sealed gearbox and is designed for single lever action to give simple engagement or disengagement and can be installed and removed in rapid fashion.

FRONT ROLLERCan either be specified as smooth, grooved or Wyle.

* Patents granted or pending.** The power testing information used to establish the power rating of these engines can be found at https://engines.honda.com/models/

“The trailed seat gives us incredible productivity. It is quick and simple to attach and remove, and any adjustments to programmable speed can all be done at the touch of a button. The regen braking also gives us great control over end of line braking and turning.”

Leicester City F.C.

“We run a fleet of SM34 rotary mowers and consider them to be one of the most well-balanced machines we’ve ever used! They have a fantastic level of vacuum force, and the height and walking speed are so quick and simple to set and adjust via the INFINIApp™.”

Simon Gibson - Senior Sports Turf and Grounds Manager


TURF MAINTENANCE













34” Pedestrian Rotary Mower

For Football, Baseball, Rugby, Sportsgrounds,Schools & Universities

Leading edge cut qualityLithum battery powerProgrammable via InfinAppSide mounted grass box34” width


TURF MAINTENANCE













The InfiniApp™

TM



The INFINICUTI ® SM34 Rotary Mower is designed to elevate professional rotary mower performance to a new level. Building on the hugely successful INFINICUT® reel mower range, the INFINICUT SM34 utilises many of the features offered by the reel mower such as lithium power and best in class noise and vibration levels. Simple to manoeuvre and with a design emphasis on cut quality and consistency, the INFINICUT SM34 Rotary is not only environmentally friendly but is very much built fit for purpose with the user in mind.

The large 2.5kW blade motor will power through the toughest of conditions. The high lift blade profile ensures maximum efficiency in debris collection and at the same time provides a superior stripe when compared to any other rotary mower.

Grass basket removal and attachment is simple and effective. An available transport kit ensures the rear roller traction drums remain damage free when transporting between venues.

Adjustable brush system is available to help agitate and lift the turf canopy prior to cutting.

OPERATOR CONTROLCompliance - EC CompliantOperational parameters - Programmable via BLE InfiniApp™Grass basket - 70Lt

TRACTION & CONTROLSystem voltage - 48VTraction drive - 1kW Continuous DC MotorBlade drive - 2.5kW Continuous DC MotorDifferential - Fully accessibleCruise control - Via regenerative braking

POWERPower is delivered by a lithium power source. Available in either 1.4kkWh or 2.8kkWh to drive the traction unit and the Deck’s DC brushless motor. They can be quickly swapped, in-field if necessary, to suit the working environment.Battery module option: (removable) 30Ah or 60Ah LithiumBattery charger Delta QApproximate recharge time (30Ah) - 4hrApproximate recharge time (60Ah) - 6hrEngine generator option: (removable)

WEIGHTDry weight (incl. grass basket) 30Ah = 164kg60Ah = 175kg

REAR TRACTION ROLLER PARALLELAbility to parallel rear roller to deck.

HOC15mm to 50mm - user programmable through InfiniApp™ Method of adjustment via Electronic Actuator

BRAKINGBlade safety braking - YesParking brake - Yes


SPEEDMowing - 0 - 4mphTransport - 0 - 6mph

ACCESSORY EQUIPMENTFront roller/Wheels options - YesTurf presenter -Turf Lifter System between Front Roller and DeckLight kit - LEDTransport - Transport Wheel Kit

®

®


TURF MAINTENANCE













The Ultimate in Turf Grooming, Mowingand MaintenanceFor Bowls, Cricket, Tennis, Football, Baseball, Rugby, Golf Greens, Sportsgrounds, Schools & Universities andLocal Authorities Verticutting, shallow solid tining, brushing, cleaning etcImproves the health and playability of sports turf surfacesAchieves exceptional overall surface quality and appearance22”, 26“, 30” & 24“ widths

Application specific cassettes to replace OEM cutting reels

Using the universal chassis, and appropriate adaptor kit, the TMSystem™ is the only cassette system to transform your triplex greens or lightweight fairway mower into a ‘complete’ turf maintenance system.

A versatile system to save the need to buy individual machines.


TURF MAINTENANCE













Wrenchless height adjuster

Easy adjustment on-course

Rear roller Power Brush (RRPB)

Adjustable rear roller

INFINICUT® Pedestrian Mowers

Sports turf application on modified John Deere 2500

5 Gang Fairway Mower

TMSystem™

The ultimate system to unlock the full potential of your John Deere, Toro or Jacobsen fairway or triple greens mower into multi-use units for ‘Complete Turf Refinement’. To go further, replace all three cutting heads on a JD 2500 with three 30” SMARTCut™ reels to achieve an 85” cutting width dedicated sports turf mower. The kit contains all necessary components to complete the adaptation.


TURF MAINTENANCE













Cassettes for the Grooming, Mowing and Maintenanceof all sports turf surfaces.

PowerBrush™ 22” 26” 30” 34”

UltraGroomer™ 22” 26”

SMARTVibe™ 22” 26”

TurfClean™ 22” 26” 30” 34”

StaticBrush™ 22” 26”

SpringRake™ 22” 26” 30” 34”

Grooming Cassettes

HYGIENE The TurfClean™ cassette is designed to ensure even collection of debris from the surface and also further down into the turf canopy.

GROOM The UltraGroomer™ cassette has over 80 1.3mm tungsten carbide tipped blades spaced at 5mm apart to ensure your greens are maintained in the best condition.

LEVEL The patented SMARTVibe™ cassette is the only integrated vibratory cassette in the world.

BRUSH The PowerBrush™ cassette is designed to ensure even collection of debris throughout the length of the grass catcher, maximizing the volume.

TOP DRESS The StaticBrush™ cassette is a very effective method of working sand into greens.

GROOM The SpringRake™ cassette is designed for a less aggressive approach to removing organic matter at the base of the plant and is also effective at debris removal.

Glamorgan CCC

“We’re passing over the square with the UltraGroomer™ every 3-4 weeks and each time are amazed at the amount of debris and organic matter we’re taking out – we’ve now got a square which is clean, carries good pace and encourages strong, healthy plant growth.” Robin Saxton


TURF MAINTENANCE













SarelRoller™ 22” 26” 30” 34”

StarSpiker™ 22” 26”

RazorCutter™ 22” 26” 30” 34”

Scarifier™ 22” 26”

ThatchMaster™ 22” 26” 30” 34”

Wantage Bowling Club

“Passing the SarelRoller™ over our green fortnightly keeps the surface open and, used in conjunction with other cassettes from the TMSystem™, means our green is in better condition than ever.” Dean Gibbons

Warwick Independent School Foundation

“Our 34” INFINICUT® is equipped with a 7 blade SMARTCut™ reel which delivers a really superior quality of cut. In a short period of time, it has made a noticeable difference to the health, presentation and quality of our rugby pitch and cricket square.” Duncan Toon

SMARTCut™ with Groomer22” 26” 30” 34”

Mowing Cassettes

Maintenance Cassettes

MOWING The SMARTCut™ cutting cassette is designed for both Fine Turf & Sports Turf applications and offers unrivalled quality of cut, versatility and ease of maintenance.

SCARIFY The Scarifier™ cassette is the obvious choice for greens that already have thatch at depth.

22” 26” 30” 34”SMARTCut™ 7, 11 or 14 blade options

The optional Groomer attachment contra rotates to achieve the maximum effect in alleviating grain and turf density problems.

AERATE The SarelRoller™ cassette, if used regularly, will prevent surface sealing of fine turf resulting from the effects of rolling and air-born silt.

AERATE The StarSpiker™ cassette provides an alternative method of reducing surface sealing whilst using the same principles as the Sarel roller.

DE-THATCH The ThatchMaster™ cassette is used to prevent thatch accumulation and cut through stolons & rhizomes in fine turf.

DE-THATCH The RazorCutter™ cassette produces less stress on the grass plant by employing non carbide tipped, laser cut, blades.

AERA-VATOR UA40

for landscape contractors, golf courses, colleges and small areas.Ideal

Complete with 96 tine rotor40in (1.06m)Perfect for smaller areas

AERA-VATOR

UA82-034UA82-048UA82-057

FRAMEMULTI-TINECORING SHAFT

Linkage mounted

UA82-029UA82-031

STD SHAFTSLICER

UA82-001UA82-049UA82-058

FRAMEMULTI-TINE

UA82-015UA82-017

STD SHAFTSLICER

AERA-VATOR UA60

Great for golf courses, municipals, stadiums, racecourses, eventinges, contractors, colleges and agriculture.

CORING SHAFT

Linkage mounted Complete with 144 tine rotor Perfect for medium sized areas

60in (1.52m) Aerates to a depth of up to 90mm

UA82-0072 x UA82-0482 x UA82-057

FRAMEMULTI-TINE

ING SHAFT

2 x UA82-0182 x UA82-020

STD SHAFTSLICER

AERA-VATOR UA80

Great for golf courses, municipals, stadiums, racecourses, eventing

COR

Linkage mounted Complete with 192 tine rotor Perfect for large sized areas


SEEDER BOX FOR AERA-VATOR

Seeder attachment allows multiple uses from the one machineUnique callibration makes it easy to use. Seeding Multi-tine tine shaft for fine turf areas, minimal disruption

FOR UA40FOR UA60FOR UA80

SB82-005SB82-001SB82-002

AERA-VATOR UA40

Ideal for landscape contractors, golf courses, colleges and small areas.

Linkage mountedComplete with 96 tine rotor

40in (1.06m)Perfect for smaller areas

AERA-VATOR

UA82-034UA82-048UA82-057


UA82-029UA82-031

STD SHAFTSLICER

UA82-001UA82-049UA82-058


UA82-015UA82-017

STD SHAFTSLICER

AERA-VATOR UA60

Great for golf courses, municipals, stadiums, racecourses, eventing facilities, contractors, colleges and agriculture.

Linkage mounted Complete with 144 tine rotor Perfect for medium sized areas


UA82-0072 x UA82-0482 x UA82-057


2 x UA82-0182 x UA82-020

STD SHAFTSLICER

AERA-VATOR UA80

Great for golf courses, municipals, stadiums, racecourses, eventing facilities, contractors, colleges and agriculture.

Linkage mounted Complete with 192 tine rotor Perfect for large sized areas


SEEDER BOX FOR AERA-VATOR

Seeding Multi-tine tine shaft for fine turf areas, minimal disruption.

Seeder attachment allows multiple uses from the one machineUnique callibration makes it easy to use.

FOR UA40FOR UA60FOR UA80

SB82-005SB82-001SB82-002

faciliti

Minimum Req Horsepower - 20HPMinimum Req Horsepower - 30HPMinimum Req Horsepower - 50HP

facilities, contractors, colleges and agriculture.

Minimum Req Horsepower - 40HP



SKID STEER ATTACHMENT DO40SUITS DINGO & EQUIVALENT

SEEDER BOX ATTACHMENTAVAILABLE AS OPTIONAL

AERA-VATOR

TOW UNITUA82-035

Great for Golf courses, municipals, stadiums and home owners

Seeder Box Attachment available as optional.

11hp Honda, electric lift actuator, rubber wheel frame, tow bar. Tow behind small ride-on mowers and zero turns.

TOW UNITAERA-VATOR UA60-TUA82-066

Great for councils, golf courses, stadiums, racecourses, schools and contractors

Aeration head view

23hp V-Twin Honda engineHydraulic lift / lowerComplete with 144 tine rotorFitted with road transport tyres

Great for golf courses, municipals, landscapers and contractors.


Draw bar tow unit, swing out hitch60in (1.52m) aerating widthAerates to a depth of up to 90mm

DO82-005

DO82-006

SKID STEER ATTACHMENT DO40SUITS DINGO & EQUIVALENT

SEEDER BOX ATTACHMENTAVAILABLE AS OPTIONAL

AERA-VATOR

TOW UNITUA82-035

Great for Golf courses, municipals, stadiums and home owners

Seeder Box Attachment available as optional.

11hp Honda, electric lift actuator, rubber wheel frame, tow bar. Tow behind small ride-on mowers and zero turns.

TOW UNITAERA-VATOR UA60-TUA82-066

Great for councils, golf courses, stadiums, racecourses, schools and contractors

Aeration head view

23hp V-Twin Honda engineHydraulic lift / lowerComplete with 144 tine rotorFitted with road transport tyres



Draw bar tow unit, swing out hitch60in (1.52m) aerating widthAerates to a depth of up to 90mm

DO82-005

DO82-006

AGRIVATOR AG72

Great for golf courses, municipals, stadiums, racecourses, agriculture and

6' (182cm) Cat2 Linkage Complete with 144 tine rotor, 200mm long x 20mm diameter tinesAerates to a depth of up to 200mm

AGRIVATOR

AG82-006FRAME AG82-013CLEATED ROLLER

AGRIVATOR AG96

Great for golf courses, municipals, stadiums, racecourses, agriculture and


AG82-003FRAME AG82-014

AG82-015

CLEATED ROLLER

AGRIVATOR AG144

Great for golf courses, municipals, stadiums, racecourses, agriculture and contractors.

12' (365cm) Cat2 LinkageComplete with 288 tine rotor, 200mm long x 20mm diameter tinesAerates to a depth of up to 200mm

SEED BOX FOR AGRIVATOR


FOR AG72FOR AG96FOR AG144

AG82-016AG82-017AG82-018

AG82-001FRAME CLEATED ROLLER

AGRIVATOR AG72



AGRIVATOR

AG82-006FRAME AG82-013CLEATED ROLLER

AGRIVATOR AG96



AG82-003FRAME AG82-014

AG82-015

CLEATED ROLLER

AGRIVATOR AG144


12' (365cm) Cat2 LinkageComplete with 288 tine rotor, 200mm long x 20mm diameter tinesAerates to a depth of up to 200mm

SEED BOX FOR AGRIVATOR


FOR AG72FOR AG96FOR AG144

AG82-016AG82-017AG82-018

AG82-001FRAME CLEATED ROLLER

contractors.

contractors.


Minimum Req Horsepower - 50HPMinimum Req Horsepower - 70HPMinimum Req Horsepower - 90HP



VERTICUTTER - SCARIFIER

VC60 VERTICUTTER/SCARIFIERVC82-004

Has unique feature of swing hitch which allows turning around objects or circular operating pattern.

Swing hitch allows turning as you work

Cross cut Break up cores

Operated to a depth up to 37mm, perfect for golf greens, tees, fairways and sports fields.

Min. 30hp tractor.60 Blades 3mm tungsten tipped, set at 50mm spacing.

VERTICUTTER - SCARIFIER

VC60 VERTICUTTER/SCARIFIERVC82-004

Has unique feature of swing hitch which allows turning around objects or circular operating pattern.

Swing hitch allows turning as you work

Cross cut Break up cores

Operated to a depth up to 37mm, perfect for golf greens, tees, fairways and sports fields.

Min. 30hp tractor.60 Blades 3mm tungsten tipped, set at 50mm spacing.

VC60 - Avg 38 HP at 1 MPH full depth in fairly dry soil50 HP at 3 MPH full depth in fairly dry soil

(Recommend min 40 HP)

TURBINE BLOWER - TOW BEHIND33A75E0137

TB27027hp with electric start Power unit and remote wireless control tow behind blower, very manoeuvrable and operated from the seat via remote control, 360º nozzle rotation.

Ideal for rubbish, leaf and debris removal at golf clubs, councils, schools and large private properties.


TB38038hp Kohler with electric start power unit and remote wireless control tow behind blower, very manoeuvrable and operated from the seat via remote control, with a low mounted chute and 270º nozzle rotation.


IMPELLER BLOWER - TRACTOR MOUNTED(3 POINT LINKAGE) 32A75E0001 | 32A75E0032

BW3500 T.Pwith 180 degree hydraulic operated deflector (10,600 CFM).PTO impeller blower, extremely quiet.

Ideal for rubbish, leaf and debris removal at golf clubs, councils, schools, race tracks and polo fields.

IMPELLER BLOWER - TRACTOR MOUNTED(3 POINT LINKAGE)32A75E0031 | 32A75E0032



FAIRWAY AERATOR - 3 POINT TRACTOR HITCH21A75E0066

Model FA-720 TPwith the choice of 96 x 3/4" closed spoons or 96 x 6" slicing knives. 12 cast iron wheels mounted on 6 axles work independently to follow contours and penetrate compacted areas.

Ideal for golf, sports fields, municipals, polo fields and contractors.


TB28028hp Subaru with electric start Power unit and remote wireless control tow behind blower, very manoeuvrable and operated from the seat via remote control, 360º nozzle rotation.



TB38038hp Kohler with electric start power unit and remote wireless control tow behind blower, very manoeuvrable and operated from the seat via remote control, with a low mounted chute and 270º nozzle rotation.


IMPELLER BLOWER - TRACTOR MOUNTED(3 POINT LINKAGE) 32A75E0001 | 32A75E0032



IMPELLER BLOWER - TRACTOR MOUNTED(3 POINT LINKAGE)32A75E0031 | 32A75E0032



FAIRWAY AERATOR - 3 POINT TRACTOR HITCH21A75E0066

Model FA-720 TPwith the choice of 96 x 3/4" closed spoons or 96 x 6" slicing knives. 12 cast iron wheels mounted on 6 axles work independently to follow contours and penetrate compacted areas.

Ideal for golf, sports fields, municipals, polo fields and contractors.

GROUNDKEEPER SMART CUT

GROUNDKEEPER GH1500GH1500Compact tractors from 25kW/34hp Cat. I/IIManual tractor hydraulics150cm working width, 1500 litre hopper capacity3 point hitch, PTO shaft driven, hydraulic rear dumping, dry weight 600kgs with optional double acting rams, ground level discharge


Ideal for: leaf and debris removal, dethatching, sports fields grooming and mowing, golf courses, school grounds maintenance and contractors.

Ideal for: leaf and debris removal, dethatching, sports fields grooming and mowing, golf courses, school grounds maintenance, municipals and contractors.

GROUNDKEEPER GHL-1500GHL-1500 | 996076Tractors from 40kW/53hp Cat. I/IIManual tractor hydraulics150cm working width, 1800 litre hopper capacity3 point hitch, PTO shaft driven, 1.9m hydraulic high lift rear dump, dry weight 690kgs with air flow deflector

Ideal for: leaf and debris removal, dethatching, sports fields maintenance polo fields, golf courses, school grounds, municipals and contractors.

GROUNDKEEPER GHL-T 1500GHL-T-1500 | 996076Compact tractors from 40kW/53hp Cat. I/IIManual tractor hydraulics150cm working width, 1550 litre hopper capacity3 point hitch, PTO shaft driven, trailling rear wheels with hydraulic lift assist, hydraulic rear high lift dumping, dry weight 780kgs with air flow deflector.


SUPER SERIES

Larger tractors from 30kW/40hp Cat. I/II180cm working width 1800 litre hopper capacityWeight - 760kgs 3 point hitchHydraulic rear pump


Heavier frame, wider jockey wheels, heavy drive belts, lesser PTO angle.

GROUNDKEEPER GH-1800 SUPERGH-1800 SUPER






Ideal for: leaf and debris removal, dethatching, sports fields grooming and mowing, golf courses, school grounds maintenance, municipals and contractors.

GROUNDKEEPER GHL-1500GHL-1500 | 996076Tractors from 40kW/53hp Cat. I/IIManual tractor hydraulics150cm working width, 1800 litre hopper capacity3 point hitch, PTO shaft driven, 1.9m hydraulic high lift rear dump, dry weight 690kgs with air flow deflector


GROUNDKEEPER GHL-T 1500GHL-T-1500 | 996076Compact tractors from 40kW/53hp Cat. I/IIManual tractor hydraulics150cm working width, 1550 litre hopper capacity3 point hitch, PTO shaft driven, trailling rear wheels with hydraulic lift assist, hydraulic rear high lift dumping, dry weight 780kgs with air flow deflector.


SUPER SERIES



Heavier frame, wider jockey wheels, heavy drive belts, lesser PTO angle.



GROUNDKEEPER GHS1500GHS1500Tractors from 25kW/34hp, Permissible 25km/h road speedManual or Electro Hydraulic controls150cm working width, 2500 litre hopper capacity3 point linkage attachment, PTO shaft driven, dry weight 1040kgs,2.20m hydraulic rear high level discharge, trailling pivot rear wheels


Ideal for: leaf and debris removal, dethatching, sports fields maintenance, polo fields, golf courses, school grounds, municipals and contractors.




GROUNDKEEPER DRIVE GHS1500GHS1500 DRIVETractors from 25kW/34hp, Permissible 30km/h road speedManual or Electro Hydraulic controls150cm working width, 2500 litre hopper capacityLow drawbar, PTO shaft driven, trailling fixed rear wheels, dry weight 1030kgs, 2.30m hydraulic rear high level discharge



















Equestrian and Race clubs No tools required for blade replacement

Low Drawbar “Drive” units Blades - Wing and 3mm straight




Equestrian and Race clubs No tools required for blade replacement

Low Drawbar “Drive” units Blades - Wing and 3mm straight

PROFIHOPPER PHS1250I 2WD, SELF PROPELLEDPH-1250 IDRIVE18kW/24.5hp125cm working width, cutting rotor with 72 (36 pairs) blades1000 litre hopper capacity, compacted Steering wheel, Intelligent 2-wheel drive, 0 radius turning, hydrostatic drives2.10m hydraulic high lift rear dumping, dry weight 1100kgs

Ideal for: leaf and debris removal, dethatching, sports fields grooming and mowing, golf courses, schools, municipals, home owners and contractors.

PROFIHOPPER PHS1250-WD 4WD, SELF PROPELLED PH-1250 4WD18kW/24.5hp125cm working width, cutting rotor with 72 (36 pairs) blades1000 litre hopper capacity, compacted Steering wheel, Intelligent 4-wheel drive, 0 radius turning, hydrostatic drives2.10m hydraulic high lift rear dumping, dry weight 1100kgs


PROFIHOPPER SMART CUT

High lift dumping

Blades - Wing and dethatch

Municipal and cemetaries

Collecting leaves Long grass cutting

PROFIHOPPER PHS1250I 2WD, SELF PROPELLEDPH-1250 IDRIVE18kW/24.5hp125cm working width, cutting rotor with 72 (36 pairs) blades1000 litre hopper capacity, compacted Steering wheel, Intelligent 2-wheel drive, 0 radius turning, hydrostatic drives2.10m hydraulic high lift rear dumping, dry weight 1100kgs


PROFIHOPPER PHS1250-WD 4WD, SELF PROPELLED PH-1250 4WD18kW/24.5hp125cm working width, cutting rotor with 72 (36 pairs) blades1000 litre hopper capacity, compacted Steering wheel, Intelligent 4-wheel drive, 0 radius turning, hydrostatic drives2.10m hydraulic high lift rear dumping, dry weight 1100kgs


PROFIHOPPER SMART CUT

High lift dumping

Blades - Wing and dethatch

Municipal and cemetaries

Collecting leaves Long grass cutting

MULTI-SEEDER

MULTI-SEEDER 1200RX-124.120.002

Ideal for: sports fields, golf courses, schools and contractors

Compact tractors requirement 25-40hp Cat. 1 & 22 hydraulic outlets required

3 point hitchDry weight 635kgs and fitted with a folding rear drag brush

1.2m working width153 litre hopper capacityHydraulic Seed shut off








Compact tractors requirement 40-80hp Cat. 22 hydraulic outlets required



Cone shaped spikes Folding rear drag brush Floating head

MULTI-SEEDER













Compact tractors requirement 40-80hp Cat. 22 hydraulic outlets required



Cone shaped spikes Folding rear drag brush Floating head

BLECAVATOR

BLECAVATOR BV145 (COMPACT STONEBURIER)BV145

Ideal for: sports fields, golf courses and contractors

35-65hp1.5m working width, rotor with 54 Blades, transport width 1.9mAdjustable depth control, adjustable tine bar screenCleated rear roller with scraperWeight 485kgs

BLECAVATOR BV210 (MID-RANGE STONEBURIER)BV210



BLECAVATOR BV250 (HEAVY DUTY)BV250HD






BLECAVATOR

BLECAVATOR BV145 (COMPACT STONEBURIER)BV145



BLECAVATOR BV210 (MID-RANGE STONEBURIER)BV210









MULTIVATOR

MULTIVATOR MV180 MEDIUMMV180

Decompact, recycle sand to sandy loam and top dress in one pass Ideal for: sports fields, golf courses and contractors

45-80hp540 PTO required, 4WD and creeper gears1.8m working width, rotor with 18 blades at 20cm spacings or36 blades at 10cm spacings Adjustable depth control, transport width 2.3m, weight 1365kgs Optional - rear roller or rotary hydraulic brush, quaking blades

MULTIVATOR MV210 HD DUAL DRIVE MV210


70-100hp540 PTO required, 4WD and creeper gears2.1m working width, rotor with 30 blades at 20cm spacingsAdjustable depth control, transport width 2.3m, weight 765kgs Optional - rear roller or rotary hydraulic brush, quaking blades

DECOMPACTS, RECYCLES AND TOPDRESSES IN ONE PASSIDEALLY SUITED LOAMY TO SANDY SOILS

Decompact "Quaking" blades Large sports fields Recycling blade view

MULTIVATOR

MULTIVATOR MV180 MEDIUMMV180


45-80hp540 PTO required, 4WD and creeper gears1.8m working width, rotor with 18 blades at 20cm spacings or36 blades at 10cm spacingsAdjustable depth control, transport width 2.3m, weight 1365kgsOptional - rear roller or rotary hydraulic brush, quaking blades

MULTIVATOR MV210 HD DUAL DRIVE MV210


70-100hp540 PTO required, 4WD and creeper gears2.1m working width, rotor with 30 blades at 20cm spacingsAdjustable depth control, transport width 2.3m, weight 765kgsOptional - rear roller or rotary hydraulic brush, quaking blades

DECOMPACTS, RECYCLES AND TOPDRESSES IN ONE PASSIDEALLY SUITED LOAMY TO SANDY SOILS

Decompact "Quaking" blades Large sports fields Recycling blade view

VERTI-QUAKE

VERTI-QUAKE VQ2510VQ2510


Remove 6 of the 12 blades for root pruning

Root prunerCompact tractors requirement 28 - 50hp Cat. 1 & 2540 PTO required, 4WD and creeper gears1.1m working width, heavy duty12 x 12.7mm thick blades, 250mm spacings, adjustable working depth to 250mm, 3 point hitch, dry weight 470kgs



Tractors requirement 40 - 70hp Cat. 1 & 2540 PTO required, 4WD and creeper gears1.6m working width, heavy duty18 x 12.7mm thick blades, 250mm spacings, adjustable working depth to 250mm3 point hitch, dry weight 615kgs


Ideal for: sports fields, golf courses, schools, contractors and turf clubs


VERTI-QUAKE VQ3821 HDVQ3821HD


Tractors requirement 80 - 120hp Cat. 2540 PTO required, 4WD and creeper gears2.1m working width, heavy duty30 x 15mm thick blades, 250mm spacings, adjustable working depth to 380mm3 point hitch, dry weight 1602kgs

VERTI-QUAKE



Remove 6 of the 12 blades for root pruning

Root prunerCompact tractors requirement 28 - 50hp Cat. 1 & 2540 PTO required, 4WD and creeper gears1.1m working width, heavy duty12 x 12.7mm thick blades, 250mm spacings, adjustable working depth to 250mm, 3 point hitch, dry weight 470kgs







VERTI-QUAKE VQ3821 HDVQ3821HD


Tractors requirement 80 - 120hp Cat. 2540 PTO required, 4WD and creeper gears2.1m working width, heavy duty30 x 15mm thick blades, 250mm spacings, adjustable working depth to 380mm3 point hitch, dry weight 1602kgs

TURF TENDER

DAKOTA 410 HONDA POWERED C4111

Easy to use digital hand controller with universal mount.Spreads all material (including wet sand) better than all other top dressers.

Fitted with a Honda Engine with Electric start and it's own hydraulics.Can be towed by tractor or diesel prime mover.

DAKOTA 410 HYDRAULIC(POWERED BY TRACTOR’S HYDRAULICS) C4101To be towed with a Tractor, powered by the tractors hydraulics.

DAKOTA 410 MOUNTEDC4131 - JD | C4151 - Toro | C4164 - Jac | C4154J - JacUses vehicle’s hydraulics

Can be fitted to Toro workman, John Deere Progator and Jacobsen TrucksterSpreads all material (including wet sand) better than all other top dressers.

Ideal for: sports fields, golf courses and contractors.



DAKOTA REAR CONVEYORC41071

DAKOTA CONTROLLER

Call for a demo

Can be mounted to all Dakota 410 Turf Tenders, both mounted or pulled.

Gives you the perfect spreadpatterns at your finger tips.

TURF TENDER

DAKOTA 410 HONDA POWERED C4111

Easy to use digital hand controller with universal mount.Spreads all material (including wet sand) better than all other top dressers.

Fitted with a Honda Engine with Electric start and it's own hydraulics.Can be towed by tractor or diesel prime mover.

DAKOTA 410 HYDRAULIC(POWERED BY TRACTOR’S HYDRAULICS) C4101To be towed with a Tractor, powered by the tractors hydraulics.

DAKOTA 410 MOUNTEDC4131 - JD | C4151 - Toro | C4164 - Jac | C4154J - JacUses vehicle’s hydraulics

Can be fitted to Toro workman, John Deere Progator and Jacobsen TrucksterSpreads all material (including wet sand) better than all other top dressers.




DAKOTA REAR CONVEYORC41071

DAKOTA CONTROLLER

Call for a demo

Can be mounted to all Dakota 410 Turf Tenders, both mounted or pulled.

Gives you the perfect spreadpatterns at your finger tips.

CutCutCutCut

TURF TENDER

DAKOTA 310DK-C031111hp Honda engine with easy to use manual controlsHydrostatic drive, hydraulic drive to spinners & floorSpread width to 6 metres12 cubic ft hopper capacity - heapedSpreads light, heavy, wet and dry sand

Ideal for: sports fields, golf courses, bowling greens and contractors.

C4120 | C42490With hydraulic power with electronic controller and hopper vibrator

prime mover, able to be controlled from operator’s seat.Spreads all material (inc. wet sand) better than all other top dressers available.

Ideal for: golf courses, councils and contractors.



Ideal for: golf courses, race tracks, councils and contractors.

DAKOTA 412 & 414Rear adjustable door only

OPTIONAL:414: 2 wheel brakes - C42430414: 2 wheel brakes - C41230

Easy to use controller

TURF TENDER

DAKOTA 310DK-C031111hp Honda engine with easy to use manual controlsHydrostatic drive, hydraulic drive to spinners & floorSpread width to 6 metres12 cubic ft hopper capacity - heapedSpreads light, heavy, wet and dry sand

Ideal for: sports fields, golf courses, bowling greens and contractors.



Ideal for: golf courses, councils and contractors.



Ideal for: golf courses, race tracks, councils and contractors.

DAKOTA 412 & 414Rear adjustable door only

OPTIONAL:414: 2 wheel brakes - C42430414: 2 wheel brakes - C41230

Easy to use controller

CutCutCutCut

TURF TENDER

420 - C4201 | C42050 | C42190With hydraulic power and hydraulic rear door, electric front door, electronic controller, hopper vibrator and additional front door,2 wheel electric brakes

prime mover, able to be controlled from operators seat.Spreads all material (inc. wet sand) better than all other top dressers available.

Ideal for: golf courses, councils, race tracks and contractors.

440 - C4401 | C44050 | C44190With hydraulic power with electronic controller and hopper vibrator


Ideal for: golf courses, race tracks, polo fields, councils and contractors.

DAKOTA 420 & 440OPTIONAL:

420: Side conveyor - C42070440: 2 wheel brakes - C44070

420 conveyor side loading 410

OPTIONAL:FLOATING BOX SCRAPER 420

C42300FLOATING BOX SCRAPER 440

C44301ELECTRIC FRONT DOOR 420


C44150HYD LOAD BREAKER 440

C44170

OPTIONAL:DAKOTA 440 BLENDER

C44303

4 wheel axle

TURF TENDER

420 - C4201 | C42050 | C42190With hydraulic power and hydraulic rear door, electric front door, electronic controller, hopper vibrator and additional front door,2 wheel electric brakes

prime mover, able to be controlled from operators seat.Spreads all material (inc. wet sand) better than all other top dressers available.

Ideal for: golf courses, councils, race tracks and contractors.

440 - C4401 | C44050 | C44190With hydraulic power with electronic controller and hopper vibrator


Ideal for: golf courses, race tracks, polo fields, councils and contractors.

DAKOTA 420 & 440OPTIONAL:

420: Side conveyor - C42070440: 2 wheel brakes - C44070

420 conveyor side loading 410

OPTIONAL:FLOATING BOX SCRAPER 420

C42300FLOATING BOX SCRAPER 440



C44150HYD LOAD BREAKER 440

C44170

OPTIONAL:DAKOTA 440 BLENDER

C44303

4 wheel axle

TURF TENDER

DAKOTA TURF CONTRACTOR (DUMP TRAILER) - 525C52501

4 Wheel Turf Tender Axle, 14" Ultra Trac Turf TiresTray dimensions - 55" x 84.5" (138cm x 215cm)16" Removable sides to allow forking pallets onUnder body hydraulic dump cylinder with automatic tail-gate opening

Ideal for: golf courses, race tracks and contractors.


4 Wheel Turf Tender Axle, 16" Ultra Trac Turf TiresTray dimensions - 72" x 120" (177cm x 305cm)16" Removable sides to allow forking pallets onUnder body hydraulic dump cylinder with automatic tail-gate openingOPTIONAL: 2 wheel electric brakes - C55181


TURF TENDER


4 Wheel Turf Tender Axle, 14" Ultra Trac Turf TiresTray dimensions - 55" x 84.5" (138cm x 215cm)16" Removable sides to allow forking pallets onUnder body hydraulic dump cylinder with automatic tail-gate opening



4 Wheel Turf Tender Axle, 16" Ultra Trac Turf TiresTray dimensions - 72" x 120" (177cm x 305cm)16" Removable sides to allow forking pallets onUnder body hydraulic dump cylinder with automatic tail-gate openingOPTIONAL: 2 wheel electric brakes - C55181


EQUIPMENT SOLUTIONS RANGE

POWER BROOMSR-PBROOM 1.5m

HEAVY DUTY SCARIFIER 150CM (60") SR-SCARI 1.5m

Ideal for: sports fields, stadiums, contractors, golf courses and racecourses

Fine dethatching rotor available with 1mm or 2mm Tungsten tipped blades set at 25mm spacings, upon request


Compact tractors from 25kW/34hp1.5m working width, 3 point linkage attachmentCrank handle adjusters enable depth to be set accurately, quick and easyCounter rotating brush provides effeciency for debris removalHeavy guage 115mm diameter front and rear rollers with scrapersTwo 360º pivoting wheel assembles at the rear for manouverability1.6m catcher that lifts up hydraulically to empty behind the rear wheels.Catcher lid opens automatically when emptying.

Tractors from 18.5kW/25hp, Cat. I/II hitch, 1.5m working width70 x 3mm Tungsten tipped blades set at 40mm spacingHeavy duty contruction Adjustable working depth via front and rear rollers, to a depth of 50mm




Tractors from 35kW/47hp, Cat. I/II hitch, 1.8m working width90 x 3mm Tungsten tipped blades set at 40mm spacingHeavy duty contruction, dual drive to rotor Adjustable working depth via front and rear rollers, to a depth of 50mm

Width: 1700mm Length: 1800mmHeight: 1100mm

DIMENSIONS:

Rotor can be fitted with 1mm or2mm fine blades @ 25 mm spacing

Rotors available for both 1.5m and 1.8m units

For large tractors:Top link extension

For large tractors:Lower extension


POWER BROOMSR-PBROOM 1.5m





Compact tractors from 25kW/34hp1.5m working width, 3 point linkage attachmentCrank handle adjusters enable depth to be set accurately, quick and easyCounter rotating brush provides effeciency for debris removalHeavy guage 115mm diameter front and rear rollers with scrapersTwo 360º pivoting wheel assembles at the rear for manouverability1.6m catcher that lifts up hydraulically to empty behind the rear wheels.Catcher lid opens automatically when emptying.

Tractors from 18.5kW/25hp, Cat. I/II hitch, 1.5m working width70 x 3mm Tungsten tipped blades set at 40mm spacingHeavy duty contruction Adjustable working depth via front and rear rollers, to a depth of 50mm




Tractors from 35kW/47hp, Cat. I/II hitch, 1.8m working width90 x 3mm Tungsten tipped blades set at 40mm spacingHeavy duty contruction, dual drive to rotor Adjustable working depth via front and rear rollers, to a depth of 50mm

Width: 1700mm Length: 1800mmHeight: 1100mm

DIMENSIONS:

Rotor can be fitted with 1mm or2mm fine blades @ 25 mm spacing

Rotors available for both 1.5m and 1.8m units

For large tractors:Top link extension

For large tractors:Lower extension


Folded view

9HP HONDA POWERED SCARIFIER TE-SCS-9hp

ES MOBILE HOSE REEL WITH SIDE BRACESNMHOSEBRACE


Ideal for: Wickets, bowling , tennis, contractors and golf courses

52cm (20") working widthAdjustable working depth to a maximum of 25mm Central depth controlBlade spacings - 25mm2mm Tungsten tipped bladesSolid wheels with wheel scrapersQuick release d rive for safe operationRHS wheel offset for edge work

Capacity: 100m x 25mm hoseCapacity: 150m x 19mm hoseBall hitch16 x 6.50-5 Turf Tires

9' GOLF GREEN SANDING BROOM - FINE TT-NMGGSBRF

Ideal for: Golf courses

Folds for easy transportAdjustable tow hitchSoft BristleRevesable for bristle longevity


Folded view

9HP HONDA POWERED SCARIFIER TE-SCS-9hp

ES MOBILE HOSE REEL WITH SIDE BRACESNMHOSEBRACE


Ideal for: Wickets, bowling , tennis, contractors and golf courses

52cm (20") working widthAdjustable working depth to a maximum of 25mm Central depth controlBlade spacings - 25mm2mm Tungsten tipped bladesSolid wheels with wheel scrapersQuick release d rive for safe operationRHS wheel offset for edge work

Capacity: 100m x 25mm hoseCapacity: 150m x 19mm hoseBall hitch16 x 6.50-5 Turf Tires

9' GOLF GREEN SANDING BROOM - FINE TT-NMGGSBRF

Ideal for: Golf courses

Folds for easy transportAdjustable tow hitchSoft BristleRevesable for bristle longevity

AIRROW VERTICUTTERENGINE:HYDROSTATIC:CUTTING DEPTH:CUTTING WIDTH:WIDTH:LENGTH:HEIGHT:WEIGHT:

GS-04 VERTICUTTERTried and tested machine has proven to be extremely durable while providing excellent results. It is ideal for anywhere you need a Graden.

Honda 5.5Hp - GX200 Forward and reverse variable speed0 to 25mm maximum with standard blades14" (380mm)26" (670mm)52" (1320mm)39" (1000mm) 100 kg

ENGINE:HYDROSTATIC:CUTTING DEPTH:CUTTING WIDTH:WIDTH:LENGTH:HEIGHT:WEIGHT:

Honda 13hp – GX390Forward and reverse variable speed 0 to 1.5Inches (40mm)16" (400mm)33" (840mm)59" (1100mm)41" (1040mm) 165 kg

GBS 1200 VERTICUTTERA tractor mounted 48" (1200mm) straight reel Graden sporting 39

TRACTOR REQUIREMENTS:CUTTING DEPTH:CUTTING WIDTH:WIDTH:LENGTH:HEIGHT:WEIGHT:

Minimum 20hp0 to 1.75 inches (45mm)48" (1200mm)51" (1250mm)61" (1540mm)20" (500mm)280 kg

SW-04 SWINGWING VERTICUTTERA tractor mounted Graden with three individual floating heads. It is ideal


Minimum 30hp0 to 1.75 inches (45mm)59" (1500mm) or 79" (2000mm)79" (2000mm) or 98" (2480mm)57" (1450mm)37" (950mm)330 kg or 360 kg

AIRROW VERTICUTTERENGINE:HYDROSTATIC:CUTTING DEPTH:CUTTING WIDTH:WIDTH:LENGTH:HEIGHT:WEIGHT:

GS-04 VERTICUTTERTried and tested machine has proven to be extremely durable while providing excellent results. It is ideal for anywhere you need a Graden.

Honda 5.5Hp - GX200 Forward and reverse variable speed0 to 25mm maximum with standard blades14" (380mm)26" (670mm)52" (1320mm)39" (1000mm) 100 kg

ENGINE:HYDROSTATIC:CUTTING DEPTH:CUTTING WIDTH:WIDTH:LENGTH:HEIGHT:WEIGHT:

Honda 13hp – GX390Forward and reverse variable speed 0 to 1.5Inches (40mm)16" (400mm)33" (840mm)59" (1100mm)41" (1040mm) 165 kg

GBS 1200 VERTICUTTERA tractor mounted 48" (1200mm) straight reel Graden sporting 39


Minimum 20hp0 to 1.75 inches (45mm)48" (1200mm)51" (1250mm)61" (1540mm)20" (500mm)280 kg

SW-04 SWINGWING VERTICUTTERA tractor mounted Graden with three individual floating heads. It is ideal


Minimum 30hp0 to 1.75 inches (45mm)59" (1500mm) or 79" (2000mm)79" (2000mm) or 98" (2480mm)57" (1450mm)37" (950mm)330 kg or 360 kg

CONTOUR SAND INJECTION VERTICUTTER

ENGINE:HYDROSTATIC:CUTTING DEPTH:CUTTING WIDTH:WIDTH:LENGTH:HEIGHT:WEIGHT:OPTIONAL:

GROUNDHOG CLEAN-UP UNITYour days of 5 to 7 man cleaning crews are over as the Groundhog with only

Once the debris is picked up, the self-dumping hopper extends upward and forward, and then tilts to near 90 degrees allowing you to dump the contents

Wider and faster than the GS-O4, with the ability to inject sand through a gravity feed system. A seeder unit is also available so a third process can be achieved with great results in the one pass.

Honda 20hp - GX630 with electric startForward and reverse variable speed0 to 1.5 inches (40mm) 21" (525mm) 37" (950mm) 50" (1250mm) 48" (1220mm) 290 kgSeeder box can be fitted

ENGINE:HYDROSTATIC:HEAD:HOPPER:WIDTH:LENGTH:HEIGHT:WEIGHT:

Kawasaki FS481 V-Twin 14.5hpForward and reverse variable speed13.5" (800mm) free floating11.3 ft (0.315m) self dumper49.5" (1000mm)98.5" (2500mm)38" (960mm)365 kg

Z2R GREENS ROLLERWith all 4 rollers providing traction and a simple button to lift and lower the wheels, the Z2R Flex eliminates any OH&S issues caused by hitching.Eliminating the need to be towed, frees up utility vehicles around the course.

ENGINE:

HYDROSTATIC:SPEED TRANSPORT MODE:ROLLING SPEED:GROUND PRESSURE:WIDTH OF ROLL:WEIGHT:LIGHTS:TRAILER:SPIKER:

Briggs & Stratton 2hpV-Twin VanguardForward and reverse variable speed16 km/h (max. recommended)11 km/h5.6 psi39" (1000mm)550 kgLED lights for transport and rollingNot requiredNot available

CONTOUR SAND INJECTION VERTICUTTER

ENGINE:HYDROSTATIC:CUTTING DEPTH:CUTTING WIDTH:WIDTH:LENGTH:HEIGHT:WEIGHT:OPTIONAL:

GROUNDHOG CLEAN-UP UNITYour days of 5 to 7 man cleaning crews are over as the Groundhog with only

Once the debris is picked up, the self-dumping hopper extends upward and forward, and then tilts to near 90 degrees allowing you to dump the contents

Wider and faster than the GS-O4, with the ability to inject sand through a gravity feed system. A seeder unit is also available so a third process can be achieved with great results in the one pass.

Honda 20hp - GX630 with electric startForward and reverse variable speed0 to 1.5 inches (40mm) 21" (525mm) 37" (950mm) 50" (1250mm) 48" (1220mm) 290 kgSeeder box can be fitted

ENGINE:HYDROSTATIC:HEAD:HOPPER:WIDTH:LENGTH:HEIGHT:WEIGHT:

Kawasaki FS481 V-Twin 14.5hpForward and reverse variable speed13.5" (800mm) free floating11.3 ft (0.315m) self dumper49.5" (1000mm)98.5" (2500mm)38" (960mm)365 kg

Z2R GREENS ROLLERWith all 4 rollers providing traction and a simple button to lift and lower the wheels, the Z2R Flex eliminates any OH&S issues caused by hitching.Eliminating the need to be towed, frees up utility vehicles around the course.

ENGINE:

HYDROSTATIC:SPEED TRANSPORT MODE:ROLLING SPEED:GROUND PRESSURE:WIDTH OF ROLL:WEIGHT:LIGHTS:TRAILER:SPIKER:

Briggs & Stratton 2hpV-Twin VanguardForward and reverse variable speed16 km/h (max. recommended)11 km/h5.6 psi39" (1000mm)550 kgLED lights for transport and rollingNot requiredNot available

SOD CUTTERS

Ideal for: golf courses, hire outlets, contractors and professional turf managers

6.5hp Honda2 wheel driveLow operator hand arm vibration levels (HAV)12", 14", 16", 18" and 20" sod cutting widthsMole-drain, de-compaction & trenching bladesLocking castor wheel for straight or curve cutting

TMC 26 SOD CUTTERTMC26


6.5hp Honda4 wheel driveLow operator hand arm vibration levels (HAV)12", 14", 16", 18", 20" and 24" sod cutting widthsMole-drainage and de-compaction blades to 5" deepTrench blade 7" width to 4" depth



9hp Honda4 wheel driveLow operator hand arm vibration levels (HAV)12", 14", 16", 18", 20" and 24" sod cutting widthsMole-drainage and de-compaction blades to 5" deepTrench blade 7" width to 4" depth


TMC48 - Guillotine option Mole-drain & de-compactor blades Trench blade

SOD CUTTERS


6.5hp Honda2 wheel driveLow operator hand arm vibration levels (HAV)12", 14", 16", 18" and 20" sod cutting widthsMole-drain, de-compaction & trenching bladesLocking castor wheel for straight or curve cutting



6.5hp Honda4 wheel driveLow operator hand arm vibration levels (HAV)12", 14", 16", 18", 20" and 24" sod cutting widthsMole-drainage and de-compaction blades to 5" deepTrench blade 7" width to 4" depth



9hp Honda4 wheel driveLow operator hand arm vibration levels (HAV)12", 14", 16", 18", 20" and 24" sod cutting widthsMole-drainage and de-compaction blades to 5" deepTrench blade 7" width to 4" depth


TMC48 - Guillotine option Mole-drain & de-compactor blades Trench blade

TURF AERATORS

Ideal for: narrow access, hire companies, contractors and professional turf managers

6.5 hp HondaFront wheel driveHeavy duty mechanism45cm operating width, operating depth 13cm3 crank driven timing armsAccepts the full range of SC mounting tine holders and cluster headsFitted with 13x500x6 tyres

345 HD TURF AERATOR345HD

Ideal for: golf courses, hire companies, contractors and professional turf managers

8 hp HondaRear wheel driveHeavy duty mechanism60cm operating width, operating depth of 13cm4 crank driven timing armsAccepts the full range of SC mounting tine holders and cluster headsFitted with 13x500x6 tyres


FORTURF CARE

EXCELLENCE

TURF AERATORS

Ideal for: narrow access, hire companies, contractors and professional turf managers

6.5 hp HondaFront wheel driveHeavy duty mechanism45cm operating width, operating depth 13cm3 crank driven timing armsAccepts the full range of SC mounting tine holders and cluster headsFitted with 13x500x6 tyres


Ideal for: golf courses, hire companies, contractors and professional turf managers

8 hp HondaRear wheel driveHeavy duty mechanism60cm operating width, operating depth of 13cm4 crank driven timing armsAccepts the full range of SC mounting tine holders and cluster headsFitted with 13x500x6 tyres


FORTURF CARE

EXCELLENCE

QUEEN MOWER

30” Self PropelledElectric Mower

Single Phaseor 3 Phase

Strong, lightweight fibreglass catcherDoes not rust

Standard Catcher that comes withthe Queen Mower

QUEEN MOWER

30” Self PropelledElectric Mower

Single Phaseor 3 Phase

Strong, lightweight fibreglass catcherDoes not rust

Standard Catcher that comes withthe Queen Mower

Queen TransporterPrevents damage to rollersEasy and convenient to use

OutriggersGives maximum effect when used in

conjunction with the Broom or Grooming Reel.

QUEEN MOWER

OPTIONAL EXTRAS AVAILABLE FOR YOUR

SCOTT BONNAR QUEEN MOWERFOR SYNTHETIC GREENS

Broom Grooming reel

NEW UPDATED FRONT ROLLERNEW IMPROVEMENTS•

•

•

•

Heavy duty 6mm wall thick frontroller

Solid steel front roller hangers

2 x 60mm or 2 ½” front rollerbearings

Gravity fed front roller scraper

Queen TransporterPrevents damage to rollersEasy and convenient to use

OutriggersGives maximum effect when used in

conjunction with the Broom or Grooming Reel.

QUEEN MOWER

OPTIONAL EXTRAS AVAILABLE FOR YOUR

SCOTT BONNAR QUEEN MOWERFOR SYNTHETIC GREENS

Broom Grooming reel

NEW UPDATED FRONT ROLLERNEW IMPROVEMENTS•

•

•

•

Heavy duty 6mm wall thick frontroller

Solid steel front roller hangers

2 x 60mm or 2 ½” front rollerbearings

Gravity fed front roller scraper

SCARIFIER

Buy outright, or buy ourconversion kit and fit to yourexisting scarifier

Outstanding results havebeen achieved to date

•

•

•

•

Control your playing speed to meetcompetition standards

No heavy rear rollers to flatten pile

Light enough not to leave wheel marks

Honda engine on board

Adjust height to just tickle the surface,or give a deep sweep

WHY BUY NEW? BUY FULLY RECONDITIONED MACHINERY

REJUVINATE YOURSYNTHETIC GREEN WITH THISLIGHTWEIGHT SCARIFIERFITTED WITH OUR BROOM

SCARIFIER

RENOVATES AND REJUVENATES GREENS BYTHINNING DENSE TURF AND SPONGY THATCH

NOW WITH HONDA ENGINEDeveloped to promote healthy turf by preventing thatch build-up. Its slicing and thinning action permits deep, unhindered penetration of water, air and fertiliser to the all important root system.

If allowed to remain, thatch builds up into an impenetrable barrier resulting in spongy disease prone turf.

The blades rotate in a clockwise direction causing a self-propelling action, thus eliminating the need for a power-driven system.

The depth of cut is controlled by independent wheel adjustment which can be set to give a maximum depth of 32mm.

AVAILABLE WITH TWO DIFFERENT BLADE SYSTEMS

The Round blades are used for general up-keep of turf. the round blades give a continuous slicing action. There are 16 TCT cutting edges per blade.

The Offset blades are for use during major renovation. These offset blades are designed for the removal of thatch to stimulate healthier new turf and reduce the likelihood of disease attack.There are only 2 TCT cutting edges per blade.

Body: Rustproof, cast aluminiumPower: 4 hp Honda engineCutting width: 19" Weight: 70 kg

General spacing for both blade types is 1” (24mm)Smaller spacing can be arranged.Each set consists of 19 blades.

SCARIFIER

RENOVATES AND REJUVENATES GREENS BYTHINNING DENSE TURF AND SPONGY THATCH

NOW WITH HONDA ENGINEDeveloped to promote healthy turf by preventing thatch build-up. Its slicing and thinning action permits deep, unhindered penetration of water, air and fertiliser to the all important root system.

If allowed to remain, thatch builds up into an impenetrable barrier resulting in spongy disease prone turf.

The blades rotate in a clockwise direction causing a self-propelling action, thus eliminating the need for a power-driven system.

The depth of cut is controlled by independent wheel adjustment which can be set to give a maximum depth of 32mm.

AVAILABLE WITH TWO DIFFERENT BLADE SYSTEMS

The Round blades are used for general up-keep of turf. the round blades give a continuous slicing action. There are 16 TCT cutting edges per blade.

The Offset blades are for use during major renovation. These offset blades are designed for the removal of thatch to stimulate healthier new turf and reduce the likelihood of disease attack.There are only 2 TCT cutting edges per blade.

Body: Rustproof, cast aluminiumPower: 4 hp Honda engineCutting width: 19" Weight: 70 kg

General spacing for both blade types is 1” (24mm)Smaller spacing can be arranged.Each set consists of 19 blades.

Supplied fitted to 40mm(1 1/2”) male fitting

Supplied fitted to 50mm(2”) male fitting

50 & 100m Length

Required flow rate/50m


Maximum RecommendedOperating Pressure**: 200kpa (2kg/cm²), 30 psi

Required Flow Rate per Metre:

1.5 litres per metre of hose per minute

75 litres per minute


Coverage at Optimum Pressure and Flow Rate:

16m(8m either side of hose)

Water Application Rate(at max. pressure and

max. flow rate):

Equivalent to 9mm/hour of rain at 200kpa @ 1.5 lt/

metre/min flow rate

Dimensions and Weight: 50m Unit - 29mm diameter / 5kg weight

100m Unit - 41cm diameter / 12kg weight

Coverage Area: Rectangular. Up to 1000m²(10m wide x 100m long).

Operating Length: Adjustable operating length using sliding stopper

Adjustable operating length using sliding stopper

Tube Width (Flat):

Hose Connection:

62mm

Tube Diameter (Inflated): 34mm

Number of Holes: 6 holes / 310mm of tube

Material: Special black polyethylene

Filter: 181 micrometer = 100 mesh

100m Length

250kpa (2.5kg/cm²), 36psi

2.6litres per metre of hoseper minute



20m10m either side of hose)

9.8mm per hour

40mm diameter /weight

Rectangular. Up to 1,600m²(20m wide x 100m long)

Adjustable operating lengthusing sliding stopper.

Max. 100m


Max. 100m

75mm

41mm

6 holes / 310mm of tube

Special black polyethylene

None

100m Length


6 litres per metre of hoseper minute




18mm per hour



92mm

52mm

4 holes/320mm of tube


None

100m Length

80kpa (0.8kg/cm²), 11.6 psi

0.5 litres per metre of hoseper minute



5m(2.5m either side of hose)

Equivalent to 4mm/hourof rain

30mm diameter /4kg weight

Rectangular. Up to 500m²(5m wide x 100m long).Equivalent to a full sized

tennis court.

50mm

20mm



181 micrometer = 100 mesh

Supplied fitted to 12mm(1/2”) tap nut

Supplied fitted to 40mm(1 1/2”) male fitting

Supplied fitted to 50mm(2”) male fitting

50 & 100m Length



Maximum Recommended Operating Pressure**: 200kpa (2kg/cm²), 30 psi

Required Flow Rate per Metre:

1.5 litres per metre of hose per minute



Coverage at Optimum Pressure and Flow Rate:


Water Application Rate(at max. pressure and

max. flow rate):

Equivalent to 9mm/hour of rain at 200kpa @ 1.5 lt/

metre/min flow rate

Dimensions and Weight: 50m Unit - 29mm diameter / 5kg weight

100m Unit - 41cm diameter / 12kg weight

Coverage Area: Rectangular. Up to 1000m² (10m wide x 100m long).

Operating Length: Adjustable operating length using sliding stopper

Adjustable operating length using sliding stopper

Tube Width (Flat):

Hose Connection:

62mm

Tube Diameter (Inflated): 34mm

Number of Holes: 6 holes / 310mm of tube

Material: Special black polyethylene

Filter: 181 micrometer = 100 mesh

100m Length


2.6litres per metre of hoseper minute



20m10m either side of hose)

9.8mm per hour




Max. 100m


Max. 100m

75mm

41mm

6 holes / 310mm of tube


None

100m Length


6 litres per metre of hoseper minute




18mm per hour



92mm

52mm



None

100m Length

80kpa (0.8kg/cm²), 11.6 psi

0.5 litres per metre of hoseper minute



5m(2.5m either side of hose)

Equivalent to 4mm/hourof rain

30mm diameter /4kg weight

Rectangular. Up to 500m²(5m wide x 100m long).Equivalent to a full sized

tennis court.

50mm

20mm



181 micrometer = 100 mesh

Supplied fitted to 12mm(1/2”) tap nut

Lightweight, easy to manoeuvre watering unit that eliminates the need for costly

and cumbersome watering systems, providing the essential results

needed to keep your grounds thriving! Simple and fast to

roll up and relocate to other areas.

SumiSoaker is a lightweight, easy to manoevre watering unit that eliminates the need for costly and cumbersome watering systems, providind the essential results needed to keep your grounds thriving!

Eliminate the need for expensive and cumbersome watering systems. SumiSoaker is lightweight and and easy to move around, a 50m unit weighs approximately 5kg.

Store it with ease. SumiSoaker units are compact and easy to store with a 50m

unit being only 32cm in length x 23cm wide x 43cm high.

Water with e�ciency. Output is equivalent to 9mm of rain an hour.

Water an area of up to 1,000m². 500m ² is equivalent to a full sized

tennis court.

Low operating pressure. Max operating pressure is 200kpa (30psi)

Variable length. Using the unique sliding stopper.

Fine, soft droplets. Maximises ground soakage and minimises run-o�.

Filtration system. SumiSoaker is available with a special inline �lter.

Low installation costs. Whether for commercial or domestic use, SumiSoaker is inexpensive and a more e�cient alternative to underground watering sytems and awkward above ground perfo-rain and sprinkler systems.

SumiRain is a high output compact unit designed with commercial applications in mind.

SumiRain achieves better results with less hassles.

There are two types of SumiRain - SumiRain 40 and SumiRain 50.

Higher pressures. SumiRain is made out of a tougher plastic to handle higher pressures.

Softer droplet. Eliminates problems experienced with other larger commercial watering systems such as run o� and soil compaction

whilst applying a solid ground soakage.

Wide width and coverage. SumiRain 50 - cover an area of up to 2,000m² with a width of 20m. SumiRain 40 - cover an area

of up to 1,600m² with a width of 16m.

Easy to transport. SumiRain is wound up on a steel wheel which is mounted on a metal wheel barrow style winder.


Make it rain. SumiRain 50 - 18mm per hour.SumiRain 40 - 9.8mm per hour.

The superior watering ability of SumiRain makes it ideal for:

• Sporting gr ounds• Small seed germination• Turf farms• Golf courses• Developers• Pasture establishment and

management• Equine facilities such as horse

studs

SumiRain is a high output compact unit designed with commercial applications in mind.

SumiRain achieves better results with less hassles.

There are two types of SumiRain - SumiRain 40 and SumiRain 50.

Higher pressures. SumiRain is made out of a tougher plastic to handle higher pressures.

Softer droplet. Eliminates problems experienced with other larger commercial watering systems such as run o� and soil compaction

whilst applying a solid ground soakage.

Wide width and coverage. SumiRain 50 - cover an area of up to 2,000m² with a width of 20m. SumiRain 40 - cover an area

of up to 1,600m² with a width of 16m.

Easy to transport. SumiRain is wound up on a steel wheel which is mounted on a metal wheel barrow style winder.


Make it rain. SumiRain 50 - 18mm per hour.SumiRain 40 - 9.8mm per hour.

The superior watering ability of SumiRain makes it ideal for:

• Sporting grounds• Small seed germination• Turf farms• Golf courses• Developers• Pasture establishment and management• Equine facilities such as horse studs

VERTICUTTERFOR THATCH-FREE SURFACEWith their revolutionary Fan-Force® Tungsten tipped blades spaced at just 10mm apart, the Verticutter cassettes will remove and vacuum up an incredible amount of thatch. They leave an impeccably groomed surface which will become increasingly smooth and fast as the thatch layer is gently reduced over a period of time.Most courses that use them set between 0 - 3mm working depth.Maximum depth is 6mm.

FINE-GRASS VERTICUTTERFOR THATCH-FREE SURFACEThe new Fine-Grass cassette has ultra-thin 1mm tungsten tipped blades at 15mm wide spacings. This gives a gentle yet thorough verticutting action for preventing thatch from building up in fine fescue and bent grasses.Typical working depth 1 - 2mm.Maximum depth is 6mm.

SCARIFIERFOR A THATCH-FREE ROOT ZONEPeriodic use of the Scarifier Cassettes set at 8 - 12mm deep will removeand sweep up enormous volumes of thatch from deep within your root zone, enabling air and topdressing to enter, and promoting microbial actionthat will further break down the thatch layer.

GROOMER / POA BUSTERFOR A SMOOTH TEXTURED SURFACETo thin out and refine coarser grasses, particularly Poa Annua, the Groomer/Poa Buster Cassettes have specially thin blades with offset Tungsten tips that cut at just 5mm spacings. Used at a 0 - 2mm working depth they encourage fine textured turf. Although it is virtually unnoticeable that this operation has been done, the difference in green speed can be dramatic.Used at a 0 - 2mm working depth they encourage fine textured turf.

BERMUDA TAMERKEEP BERMUDA HEALTHYKeeping Bermuda grass healthy and manicured is a challenge, but now,the Bermuda-Tamer cassette provides an unbelievably powerful new way ofkeeping this aggressive grass under control. Thousands of high tensile steel bristles give your turf complete coverage providing a superbly groomed surface and a smooth true ball roll.

VERTICUTTERFOR THATCH-FREE SURFACEWith their revolutionary Fan-Force® Tungsten tipped blades spaced at just 10mm apart, the Verticutter cassettes will remove and vacuum up an incredible amount of thatch. They leave an impeccably groomed surface which will become increasingly smooth and fast as the thatch layer is gently reduced over a period of time.Most courses that use them set between 0 - 3mm working depth.Maximum depth is 6mm.

FINE-GRASS VERTICUTTERFOR THATCH-FREE SURFACEThe new Fine-Grass cassette has ultra-thin 1mm tungsten tipped blades at 15mm wide spacings. This gives a gentle yet thorough verticutting action for preventing thatch from building up in fine fescue and bent grasses.Typical working depth 1 - 2mm.Maximum depth is 6mm.

SCARIFIERFOR A THATCH-FREE ROOT ZONEPeriodic use of the Scarifier Cassettes set at 8 - 12mm deep will removeand sweep up enormous volumes of thatch from deep within your root zone, enabling air and topdressing to enter, and promoting microbial actionthat will further break down the thatch layer.

GROOMER / POA BUSTERFOR A SMOOTH TEXTURED SURFACETo thin out and refine coarser grasses, particularly Poa Annua, the Groomer/Poa Buster Cassettes have specially thin blades with offset Tungsten tips that cut at just 5mm spacings. Used at a 0 - 2mm working depth they encourage fine textured turf. Although it is virtually unnoticeable that this operation has been done, the difference in green speed can be dramatic.Used at a 0 - 2mm working depth they encourage fine textured turf.

BERMUDA TAMERKEEP BERMUDA HEALTHYKeeping Bermuda grass healthy and manicured is a challenge, but now,the Bermuda-Tamer cassette provides an unbelievably powerful new way ofkeeping this aggressive grass under control. Thousands of high tensile steel bristles give your turf complete coverage providing a superbly groomed surface and a smooth true ball roll.

DEEP SLICERFOR VIGOROUS ROOTS & GROWTHTo prune the grass roots stimulating vigorous new growth, and to enable air to penetrate even deeper into the root zone allowing gas exchange to take place, the Deep Slicer cassettes cut continuous 20mm deep slits in the green. The specially designed blades remove no material, and therefore the surface is left virtually unmarked and immediately playable.

STAR SLITTERFOR AN AERATED ROOT ZONEThe Star Slitter cassettes mounted on your greens triple mower provide afast way of aerating to a depth of approximately 20mm whilst using a very low ground pressure power unit. The surface is left undisturbed and playcan immediately continue.

SAREL ROLLERFOR A SURFACE THAT BREATHESTo keep your turf growing strongly in Summer or drought periods when the surface tends to get sealed over, the Sarel Roller cassettes are invaluable for allowing entry for irrigation water and nutrients to a depth of approximately 20mm. They are also an ideal preparation for overseeding to produce further new growth.

GREENS ROLLERFOR FASTER, SMOOTHER GREENSA regular light rolling of your greens enables you to maintain a smooth fast surface without mowing so close. This is greatly beneficial to the health of your turf, and relieves you of the stress of continually keeping your greens on the limit. These solid steel roller cassettes fit straight into the Thatch-Away Supa-System units, providing you with a highly effective greens roller for minimum expense.

Available to fit most populargreens mowers.

DEEP SLICERFOR VIGOROUS ROOTS & GROWTHTo prune the grass roots stimulating vigorous new growth, and to enable air to penetrate even deeper into the root zone allowing gas exchange to take place, the Deep Slicer cassettes cut continuous 20mm deep slits in the green. The specially designed blades remove no material, and therefore the surface is left virtually unmarked and immediately playable.

STAR SLITTERFOR AN AERATED ROOT ZONEThe Star Slitter cassettes mounted on your greens triple mower provide afast way of aerating to a depth of approximately 20mm whilst using a very low ground pressure power unit. The surface is left undisturbed and playcan immediately continue.

SAREL ROLLERFOR A SURFACE THAT BREATHESTo keep your turf growing strongly in Summer or drought periods when the surface tends to get sealed over, the Sarel Roller cassettes are invaluable for allowing entry for irrigation water and nutrients to a depth of approximately 20mm. They are also an ideal preparation for overseeding to produce further new growth.

GREENS ROLLERFOR FASTER, SMOOTHER GREENSA regular light rolling of your greens enables you to maintain a smooth fast surface without mowing so close. This is greatly beneficial to the health of your turf, and relieves you of the stress of continually keeping your greens on the limit. These solid steel roller cassettes fit straight into the Thatch-Away Supa-System units, providing you with a highly effective greens roller for minimum expense.

Available to fit most populargreens mowers.

REAR BRUSHBRUSH OFF THE DEW AS YOU GOThe new Rear Brush kit is particularly suitable to use in conjunction with the Sarel Roller. It leaves the grass nicely brushed up for a cleaner cut next time.

ROTARY BRUSHESGENTLY BRUSHED SURFACEThe soft black rotary brush cassettes are ideal for removing due, worm casts and light debris throughout the year.The stiffer blue version available.

TOPDRESSING BRUSHFOR EVENLY DISPERSED TOPDRESSINGThe Topdressing Brush cassettes follow the contours of your greens to evenlybrush-in your topdressing without scraping it off the crowns and dumping it in the hollows like a dragmat does. They are also ideal for standing up the grass before you mow to achieve an extra clean cut and obtain the fastestball roll.

© Eric Hepworth

The world’s firstinterchangeable turfmaintenance cassettesystem for greens triplexes

REAR BRUSHBRUSH OFF THE DEW AS YOU GOThe new Rear Brush kit is particularly suitable to use in conjunction with the Sarel Roller. It leaves the grass nicely brushed up for a cleaner cut next time.

ROTARY BRUSHESGENTLY BRUSHED SURFACEThe soft black rotary brush cassettes are ideal for removing due, worm casts and light debris throughout the year.The stiffer blue version available.

TOPDRESSING BRUSHFOR EVENLY DISPERSED TOPDRESSINGThe Topdressing Brush cassettes follow the contours of your greens to evenlybrush-in your topdressing without scraping it off the crowns and dumping it in the hollows like a dragmat does. They are also ideal for standing up the grass before you mow to achieve an extra clean cut and obtain the fastestball roll.

© Eric Hepworth

The world’s firstinterchangeable turfmaintenance cassettesystem for greens triplexes

STORAGE STANDSTORAGE STAND

TRUE BLUE AUSSIE BLADE

BLADES, CYLINDERS & BRUSHESSALES ∙ SHARPENING ∙ GRINDING

BLADES TO SUIT GOLF, BOWLING, TENNIS & SPORTING CLUBS

NEWAUSSIEBLUE

BLADETrue Blue Aussie Blades are 52 Rockwell

compared to normal blades between 39 – 42 Rockwell.Available in medium and low cut

30” Grooming Reel complete with 62 TCT blades including shaft & bearings

Individual Grooming Blades∙ 11 TCT edger’s∙ Turbo Discharge∙ Hooked Profile blades cut cleaner to remove

more thatch with less disturbance

19” Offset Scarifier Reel complete with 19 blades withtwo TCT cutting edges per blade.

Individual Offset TCT blades for use duringmajor renovation.

19” Round Scarifier Reel complete with 19 blades

30” or 24” Broom to pick up debris after scarifying turf.

Scarifying Blades available in many styles. Also made to order.

30” & 24” Cutting Cylinder.Suits many mowers,including, Smooth Cut and Scott Bonnar Queen.

Individual Round TCT blades are used forgeneral up-keep of turf.

5’TRUE BLUE AUSSIE BLADE

BLADES, CYLINDERS & BRUSHESSALES ∙ SHARPENING ∙ GRINDING

BLADES TO SUIT GOLF, BOWLING, TENNIS & SPORTING CLUBS

NEWAUSSIEBLUE

BLADETrue Blue Aussie Blades are 52 Rockwell

compared to normal blades between 39 – 42 Rockwell.Available in medium and low cut

30” Grooming Reel complete with 62 TCT blades including shaft & bearings

Individual Grooming Blades∙ 11 TCT edger’s∙ Turbo Discharge∙ Hooked Profile blades cut cleaner to remove

more thatch with less disturbance

19” Offset Scarifier Reel complete with 19 blades withtwo TCT cutting edges per blade.

Individual Offset TCT blades for use duringmajor renovation.

19” Round Scarifier Reel complete with 19 blades

30” or 24” Broom to pick up debris after scarifying turf.

Scarifying Blades available in many styles. Also made to order.

30” & 24” Cutting Cylinder.Suits many mowers,including, Smooth Cut and Scott Bonnar Queen.

Individual Round TCT blades are used forgeneral up-keep of turf.

5’

TURF ENGINEERING

SMOOTH ROLL IN ACTION

SMOOTH ROLL glides over the green, thus applying a polished finish to all surfaces. It irons out all lumps and

bumps, footprints etc, and leaves a smooth flat surface in minutes. In most cases mower settings do not have to be low to achieve the required green speed. Smooth Roll saves you

time and money.

SMOOTH ROLL MANOEUVERS THROUGHNARROW AREAS

TRANSPORT TROLLEY IS STANDARD EQUIPMENT

The SMOOTH ROLL system has been engineered to give the ultimate finish. The delicate balance of the Three Roller System combined with Smooth Roll’s unique patented transmission delivers a more positive result. Smooth Roll has been assisting green keepers to achieve the desired green speeds for

over a decade. Many discerning green keepers have claimed that Smooth Roll has the correct combination that keeps it ahead of other rollers in the market place, on all species of natural turf.

SMOOTH ROLL transportation trolley picks up Smooth Roll in a side action. This allows Smooth Roll to be transported through narrow paths and doorways with minimal fuss. No clips or bolts are needed. Just roll the transporter under the lifting lugs, push down and Smooth Roll is off the ground and ready to be transported to the green or storage area.

Gives Bowling Greens and Tennis Courts the IRONED look

USED WORLDWIDE

TURF ENGINEERING

SMOOTH ROLL IN ACTION

SMOOTH ROLL glides over the green, thus applying a polished finish to all surfaces. It irons out all lumps and

bumps, footprints etc, and leaves a smooth flat surface in minutes. In most cases mower settings do not have to be low to achieve the required green speed. Smooth Roll saves you

time and money.

SMOOTH ROLL MANOEUVERS THROUGHNARROW AREAS

TRANSPORT TROLLEY IS STANDARD EQUIPMENT

The SMOOTH ROLL system has been engineered to give the ultimate finish. The delicate balance of the Three Roller System combined with Smooth Roll’s unique patented transmission delivers a more positive result. Smooth Roll has been assisting green keepers to achieve the desired green speeds for

over a decade. Many discerning green keepers have claimed that Smooth Roll has the correct combination that keeps it ahead of other rollers in the market place, on all species of natural turf.

SMOOTH ROLL transportation trolley picks up Smooth Roll in a side action. This allows Smooth Roll to be transported through narrow paths and doorways with minimal fuss. No clips or bolts are needed. Just roll the transporter under the lifting lugs, push down and Smooth Roll is off the ground and ready to be transported to the green or storage area.

Gives Bowling Greens and Tennis Courts the IRONED look

USED WORLDWIDE

TURF ENGINEERING

ENGINE Honda 5.5HP (GX160) with oil cut off switch TRANSMISSION Fully adjustable integrated system NUMBER OF ROLLERS 2 steering, 1 drive MACHINE SWATH 1600mm (63") ROLLER DIAMETERS Steering: 73mm (2 7/8"). Drive:114mm (4 ½”) OVERALL DIMENSIONS (machine only) Width: 640mm (25 1/8"). Length: 1800mm (70 7/8") Length: 1800mm (70 7/8") WEIGHT 220kg (484 lb) Evenly Balanced OVERALL DIMENSIONS (with transporter) Width: 950mm (37 1/2") Length: 200mm (78 ¾” Height 1640mm (64 ½”) CONSTRUCTION All steel SEAT Adjustable all weather vinyl BEARINGS All weather rubber sealed FINISH Powder coated epoxy CONTROL Steering: Side action "Z" pattern. Side movement: Foot Pedal.

Breaking: Alternative foot pedal. Speed: Variable TRANSPORTER Side action self loading RIM 8" x 6.50" TYRE 16" x 6.50" x 8" 2 Ply flat profile PULLEY'S Idler: Steel. Drive: Cast Iron. Clutch: Cast Iron. 1 Vee Belt connects all pulleys SEAT Now updated (to allow water drainage)

SMOOTH ROLL’S unique mathematical formula has been calculated to apply the ultimate P.S.I. The 3 rollers combined with weight and speed; deliver a fast smooth finish to all surfaces. Combine this with the patented Drive System and ‘side to side’ Z pattern steering and you will soon see why Smooth Roll has been No. 1 for many years.

Smooth Roll has many features that make it simple and easy to operate. Feather-touch foot

operated directional controls make Smooth Roll simple and safe. Alternative pedals are used for braking. Simple steering control enable a Z-Pattern movementproducing a double roll every time.

THE Z–PATTERNMOVEMENT

SMOOTH ROLL’S UNIQUEMATHEMATICAL COMBINATION OF:

ROLLER SPACINGROLLER DIAMETERSROLLER LENGTHTOTAL OVERALL WEIGHT

WEIGHT

STEERING ROLLERS DRIVE ROLLER

TURF SURFACE

SPECIFICATIONS - SRH-5

5’TURF ENGINEERING

ENGINE Honda 5.5HP (GX160) with oil cut off switchTRANSMISSION Fully adjustable integrated systemNUMBER OF ROLLERS 2 steering, 1 driveMACHINE SWATH 1600mm (63")ROLLER DIAMETERS Steering: 73mm (2 7/8"). Drive:114mm (4 ½”)OVERALL DIMENSIONS (machine only) Width: 640mm (25 1/8"). Length: 1800mm (70 7/8") Length: 1800mm (70 7/8")WEIGHT 220kg (484 lb) Evenly BalancedOVERALL DIMENSIONS (with transporter) Width: 950mm (37 1/2") Length: 200mm (78 ¾” Height 1640mm (64 ½”)CONSTRUCTION All steelSEAT Adjustable all weather vinylBEARINGS All weather rubber sealedFINISH Powder coated epoxyCONTROL Steering: Side action "Z" pattern. Side movement: Foot Pedal.

Breaking: Alternative foot pedal. Speed: VariableTRANSPORTER Side action self loadingRIM 8" x 6.50"TYRE 16" x 6.50" x 8" 2 Ply flat profilePULLEY'S Idler: Steel. Drive: Cast Iron. Clutch: Cast Iron. 1 Vee Belt connects all pulleysSEAT Now updated (to allow water drainage)

SMOOTH ROLL’S unique mathematical formula has been calculated to apply the ultimate P.S.I. The 3 rollers combined with weight and speed; deliver a fast smooth finish to all surfaces. Combine this with the patented Drive System and ‘side to side’ Z pattern steering and you will soon see why Smooth Roll has been No. 1 for many years.

Smooth Roll has many features that make it simple and easy to operate. Feather-touch foot

operated directional controls make Smooth Roll simple and safe. Alternative pedals are used for braking. Simple steering control enable a Z-Pattern movement producing a double roll every time.

THE Z–PATTERNMOVEMENT

SMOOTH ROLL’S UNIQUEMATHEMATICAL COMBINATION OF:

ROLLER SPACINGROLLER DIAMETERSROLLER LENGTHTOTAL OVERALL WEIGHT

WEIGHT

STEERING ROLLERS DRIVE ROLLER

TURF SURFACE

SPECIFICATIONS - SRH-5

5’

TURF ENGINEERING

Perfect for Bowling Greens, Golf Greens, Cricket Pitches,Tennis Courts, Croquet Lawns and Councils

Self Propelled Petrol Mower – 24” or 30”

Strong, lightweight fibreglasscatcher – doesn’t rust.

Available with5.5hp or 9hpHonda Motor

Throttle allows the operator toadjust the speed quickly and easily.

Switch to turn mower on or off

For operator convenience, cutter anddrive clutches operate independently. The machine can betransported whilethe cutting cylinder remains in a stationary position.

TURF ENGINEERING

Perfect for Bowling Greens, Golf Greens, Cricket Pitches,Tennis Courts, Croquet Lawns and Councils

Self Propelled Petrol Mower – 24” or 30”

Strong, lightweight fibreglasscatcher – doesn’t rust.

Available with5.5hp or 9hpHonda Motor

Throttle allows the operator toadjust the speed quickly and easily.

Switch to turn mower on or off

For operator convenience, cutter and drive clutches operate independently. The machine can be transported while the cutting cylinder remains in a stationary position.

TURF ENGINEERING

New heavy duty frontroller with easy height

adjustment

Cutting cylindercomes in 10 blade

or 16 blade

Teasing rake

Heavy duty chain andbelt driven clutch

Chain driven cutting cylinder and rearroller, with nylon chain adjusters

Rear Roller stand enables the optional transportwheels to be fitted and removed easily

Two segment rear roller withAutomatic diff gives a smooth drive

which results in positive traction andcontrol without bruising the turf

OPTIONAL EXTRAS AVAILABLE FOR YOURSMOOTH CUT MOWER

Broom

The Sulky was designed forrolling and polishing the Turf.The user stands on the Sulky

to assist with maximum effect.Grooming Reel

TURF ENGINEERING

New heavy duty frontroller with easy height

adjustment

Cutting cylindercomes in 10 blade

or 16 bladeTeasing rake

Heavy duty chain andbelt driven clutch

Chain driven cutting cylinder and rearroller, with nylon chain adjusters

Rear Roller stand enables the optional transportwheels to be fitted and removed easily

Two segment rear roller withAutomatic diff gives a smooth drive

which results in positive traction andcontrol without bruising the turf

OPTIONAL EXTRAS AVAILABLE FOR YOURSMOOTH CUT MOWER

Broom

The Sulky was designed forrolling and polishing the Turf.The user stands on the Sulky

to assist with maximum effect.Grooming Reel

TURF ENGINEERING

Keeps your mowers razor sharp and 100% efficientbetween services

BACKLAPPING MACHINE

Removable socket makesSmoothlap simple to use.Socket connects easily tocylinder shaft. Fits all shaftsby changing the socket tosuit the shaft size

The cover guard fullyencloses pulley and belts

for extra safety

Heavy duty fan cooled240 volt 1/3 hp motor

Non-slip rubber feetstop machine from moving

during backlapping

Adjustable Pivot Arm forvariable height adjustment

The easy grip handlemakes lifting andtransporting thebacklapper effortless

Emergency Stop buttonallows the operator to stop

the machine quickly

Forward and Reverseswitch enables the

spinning direction tobe changed to suit

any mower

Manual Start buttonprevents the machine

from being startedaccidentally

TURF ENGINEERING

Keeps your mowers razor sharp and 100% efficientbetween services

BACKLAPPING MACHINE

Removable socket makesSmoothlap simple to use.Socket connects easily tocylinder shaft. Fits all shaftsby changing the socket tosuit the shaft size

The cover guard fullyencloses pulley and belts

for extra safety

Heavy duty fan cooled240 volt 1/3 hp motor

Non-slip rubber feetstop machine from moving

during backlapping

Adjustable Pivot Arm forvariable height adjustment

The easy grip handlemakes lifting andtransporting thebacklapper effortless

Emergency Stop buttonallows the operator to stop

the machine quickly

Forward and Reverseswitch enables the

spinning direction tobe changed to suit

any mower

Manual Start buttonprevents the machine

from being startedaccidentally

Equipment Solutions Catalogue JUNE 2021 - Nuturf

Documents

Transcript of Equipment Solutions Catalogue JUNE 2021 - Nuturf