Introduction to Resimac Ltd

Engineered Polymer Solutions

Resimac overview

WHO WE ARE………. UK based manufacturer Dedicated to research and development Emphasis on quality and quality control systems Matthew McDonnell – 15 years in the chemical and corrosion industry Manager for Copon & ThistleBond Dr Paul Battey – 40 years in the chemical and corrosion industry MD for Belzona for 17 years (1990 – 2007) Technical Director for 7 years (1983 – 1990)

Resimac overview

WHERE WE WORK………. Key markets and areas for the Resimac Product Range Marine Rudders, Pumps, Bow Thrusters, Valves, Pipework, DW Tanks, filters Paper and Pulp Pumps, valves, pipe work, tanks, structural steel, chemical flooring Water Drinking Water tanks, sewage tanks, pumps, pipework Oil and Gas Process equipment and tanks, sea water filters, seperators Power Pumps, valves, pipework, bunds, tanks, filters, heat exchangers Chemical Containment areas, tanks, pumps, pipe lines, tank base and tank tops Infrastructure Waterproofing of concrete structures

Metal Repair and Protection

• Solvent free epoxy materials for repairs to steel, alloys & composites

• Paste, Fluid, Stick or fast cure grades

• Hydraulic rams, engine blocks, bearings, cylinder liners, pump casings

• 101 Metal Repair Paste, 102 Metal Repair Fluid, 104 Metal Repair Fluid XF, 106 Metal Repair Fluid XF, 107 Metal Repair Paste XL

Fluid Repair and Protection

• High performance ceramic enhanced repair and resurfacing materials for metallic surfaces subject to abrasion, corrosion & impact

• Paste or fluid grade

• Pump casing, impellers, heat exchanger end plates, separators, valves, jet tubes, rudders

• 201 Ceramic Paste, 202 Ceramic Fluid, 203 Super Flow, 204 Heavy Duty Ceramic

Pipe Repair

• GRP based solvent free repair materials for metallic, plastic, wood and composite surfaces

• Thixotropic liquid

• Capable of repairs to pipe work from 1” to 36” diameter, tolerant of pressures up to 500psi

• 301 Epoxy Resin Gel, 302 Epoxy Repair Cement

High Temperature Protection

• Solvent free epoxy coating for continuous immersion applications up to 130 ̊C

• Brush grade

• Scrubber units, process vessels, heat exchangers, pumps, valves, separators

• 205 HT Fluid, 206 HTA Fluid, 512 UCEN 90

Chemical Protection

• Solvent free epoxy coatings suitable for manual surface preparation to blast prepared surfaces

• Tolerant of acids and inorganic chemicals including 98% sulphuric acid

• Chemical tanks, bund and containment areas, chemical floors, process vessels, structural steel

• 501 CRSG, 502 CRXG, 507 DWPU, 511 UCEN

Corrosion Protection

• Solvent free/ solvent based epoxy/ PU coatings, manual prepared or abrasive blast cleaned steel/ concrete surfaces

• Structural steel/ concrete, external tanks, floors, reservoirs, pipe bridge

Liquid Applied Insulation

• Solvent free epoxy coating applied to surfaces ranging from 5°C - 100°C

• Capable of protecting against 160°C operating temps

• Process vessels, pipework, valves, storage tanks

• 560 & 561 Thermal Barrier

Liquid Membranes

• Solvent free and solvent based acrylic membranes

• Tolerant of less than ideal surface preparation

• Chemical tanks, structural steel, floating roofs

• 555 Resinox

Heat Activated Pipe protection

•Single pack heat activated epoxy novalac

• Applied to surfaces ranging from 95° - 240°C

• Eradicates CUI on pipelines and steel surfaces

• 530 HA100

Resimac customers worldwide

Metal Repair Systems

Seal leaking flange faces

Plate Bonding

Seal leaking tank seams

Repair damaged keyways

Fluid Flow Protection Systems

Worn and damaged impellers and pump parts

Corroded hot air fans and blowers

Eroded heat exchangers and condensers

Heat Exchangers and Condensers

Composite Repair Systems

Encapsulation of ballast pipes

Encapsulation of steam, effluent and fire water lines

High Temperature Protection Systems

Corroded condenser tube sheets

Corroded and eroded process vessels

Eroded distillers Worn filter bodies

Chemical Protection Systems

Corroded chemical flooring and intake areas

Tank lining

Corroded pipe work internal and external

Protection of chemical bunds and containment areas

Corrosion Protection Systems

Pipe Bridges

Structural Steel

External pipe coatings External tank coatings

Thermal Protection Systems

80C pipework reduced to 40C

90C evaporator reduced to 52C

85c oven reduced to 38C

100C evaporator reduced to 45C

Liquid Membrane Systems

UV stable anti corrosion coating for tank surfaces

UV stable waterproof membrane for floating roofs

Liquid waterproofing liners for gutters

Fast cure flexible membranes for roofs

Heat Activated Anti-corrosion Systems

Primer coat for flame sprayed polypropylene

Anti – corrosion coating applied surfaces above 100C

Replacement to FBE as part of a 3 layer PP pipe system

Over 40 years experience in Industry

Proven Track record in specific application

Technical helpline

Quick response to emergency applications

On site inspection

Continuous development of high performance products

Testing and analysis available in house

Chemical resistance

Corrosion resistance

Abrasion/ Impact resistance

High temperature resistance

Technical Support and Know How

UK based manufacture

Research and Development

Export to 32 countries

worldwide

High level of technical expertise

On site technical

support and back up