1

Short Resume Dr. Salamat Ali, Prof. of Physics,

RICAS, Riphah International University, Lahore Campus (Former Professor of Physics, GC University, Lahore).

Ph.D. completed in 1996 from the University of Durham, U.K. in Superconductivity

and Magnetism, while Post-Doc. in 2006 from the K.F. University of Graz, Austria,

Specialization in Nanotechnology. Training completed in Solar Cell Technology

from the University of Delaware, USA in 2012. Current trends include, Solar

Energy, Water purifications, Sensor technology, Development of medicines for

cancer treatment.

Total National and International Publications: 115

Total Impact Factor (JCR): 220.266

Grants Secured:

International: 1 (PAK-USA Project of an amount of US$ 0.24 M, Completed-2016)

National: 3 (Two from Higher Education Commission (HEC) of Pakistan and

one from Pakistan Science Foundation (PSF), Islamabad, Pakistan, completed).

Local: (GC. University Lahore): 2 (completed).

Labs. Established (in GCU Lahore): 3

1. Solar Cell Applications Research Lab. Feb. 2012.

2. Nano-Technology Research Lab. Sep. 2006.

3. Material Science Research Lab. Sep. 2000.

PhDs: : 07 (Produced),

M. Phil: : 76 Thesis (completed), 07 are in progress

Total Teaching and Research Experience: 33½ years.

In G.C. University Lahore: 21½ years

In Riphah International University: ~ 3 years

2

CURRICULUM VITAE Dr. SALAMAT ALI, Prof. of Physics

RICAS, Riphah International University, Lahore Campus (Former Professor of Physics, GC University, Lahore).

Born: March 04, 1958 in Dist. Kasur (Pakistan).

Passport No.: CY1807762, (Lahore, Pakistan).

Residential Address: 9-B, Faisal Apartments, Faisal Town, Block A, Lahore, (Pakistan).

Contact Nos: a). Off: 042-99211637, b). Mobile: 0092-3334267247

E-mail Address: salamatali@gcu.edu.pk

Academic Qualification:

Degree Session Name of the Institution Specialization

Ph.D. 1996 University of Durham (U.K.) Superconductivity & Magnetism

M.Phil. 1990 Quaid-e-Azam University Islamabad (Pak.). Solid State Phy./Mat. Science

M.Sc. 1982 Govt. College Lahore/Punjab University, Lahore. Physics (Advanced Electronics)

B.Sc. 1980 Govt. College Lahore/Punjab University, Lahore. Physics, Math A & B Course

Training Abroad:

• Solar Cell Fabrication and Characterization at the University of Delaware, USA, (April-May

2012).

• Post-Doc in Nanotechnology at the KF-University of Graz, Austria, (July, 2005 – July, 2006).

• XRD-Training at Almelo, Netherlands, Nov. 2004.

Grants Won:

1. Pak-US Joint Academic & Research Program 2009-10 entitled "Total Solution based Organic-Inorganic Solar

Cells for Enhanced Efficiency and Stability" of Rs. 20M, for 2010-2013. For reference pl. see the following

official link: Sr. No. 11)

(http://www.hec.gov.pk/InsideHEC/Divisions/RND/ResearchGrants/PakUSJointAcademicResearchProgram/

Pages/approvedprojects2009-10.aspx, http://sites.nationalacademies.org/PGA/dsc/pakistan/PGA_058837).

Completed-2016.

2. Higher Education Commission for “To investigate the Phase Transitions in Nanostructure Materials” for

2008-2010, Rs. 6.0 M grant, Grant No. 1109. (Completed on 31st Mar. 2011)

3. Pakistan Science Foundation grant of Rs. 1.25 M, For “A.C. Magnetic Measurements”, 2007-09 (Completed).

4. Jointly wrote project on “Installation of XRD Facility, GC University Lahore” and completed: Rs.

10.3 million (2004). 5. Govt. College Univ. Lahore, Grant (For Cu-coated Iron), 2004-06. (Completed).

6. Govt. College Univ. Grant 2006-07, (For Fabrication and Characterization of Metal Oxide Nano-Particles),

(Completed).

Research Labs. Established:

1. Solar Cell Applications Research Lab. Feb. 2012.

2. Nano-Technology Research Lab. Sep. 2006.

3. Material Science Research Lab. Sep. 2000.

Employment History:

i). From Sep. 2017 to date at Riphah International University Islamabad, Lahore Campus (Pakistan).

ii). From Oct. 1996 to March 2018 at Govt. College University Lahore, (Pakistan),

3

i). Teaching:

a). Nano-Structured and Nano-Technology, Metal Physics and Material Science to M.Phil and Ph.D

classes.

b). Solid State & Statistical Physics at Post Graduate level.

c). Methods of Experimental Physics at Post Graduate level.

d). Digital Logic and Computer Design at Graduate and Post-Graduate level.

e). Computer System Architecture at Post-Graduate level.

f). Research Methodology and Computer Applications to Undergraduate Students.

g). General Physics at Intermediate level.

h). Actively involved in Under-Graduate Experimental Labs.

i). Sep. 1993 to June 1996, Teaching B.Sc. classes, Durham University, England.

j). About 8 years of teaching at Intermediate and Graduate level at Sialkot and RWP. Div., Pakistan.

ii). General and Administration:

1. Professor of Physics (12-4-12 to 10-10-13), and 11-12-16 to date.

2. Convener, GCU Lahore, Cafeteria Committee-2016

3. Director, Intermediate Studies (28-01-2011 to 31-10-2012)

4. Member, University Discipline Committee (2012-2014).

5. Member, University Academic Council (12-4-12 to 10-10-2013).

6. Member, University Purchase Committee (2008-2011).

7. Coordinating M.Phil Program 2006-2013).

8. Member, Board of Studies (BOS) of Physics.

9. Member, Departmental Academic Committee.

10. Member, Departmental Purchase Committee.

11. In-Charge Departmental Library and Member of Books Purchase Committee.

12. Working as Head of Physics Dept. at Govt. College RWP. Div. (Pakistan) (1989-1992).

Research Experience:

1. From Oct. 1996 to date at Govt. College University Lahore:

• Established “Solar Cell Applications Research Lab”. where fabrication and characterization of

different kinds of solar cells especially Organic Solar Cell is being investigated.

• Established a Material Science/Nano-Technology Research Laboratory where Electrical, Thermal,

and Magnetic Properties of different materials are being studied at variable environments, while

Optical and Mechanical Properties are being studied at Room Temperature.

• 54 M.Phil Theses in the field of Nano-Science and Nanotechnology, High Temperature

Superconductors and Material Science have been produced so far, while 10 are in progress.

• 1 Ph.D. (completed), 3 Ph.D. Thesis (submitted for evaluation), 3 Ph.D’s are enrolled at present,

while 06 M.Phil. students are enrolled in the field of Nano Science/Solar Energy

• Newly installed X Ray Diffractometer (XRD), Low Temperature Differential Scanning

Calorimeter (DSC) and High Temperature Differential Scanning Calorimeter /Thermo-Gravimetric

Analyzer (DSC/TGA), Solar Simulator with I-V Measurement Set-up, and Photo spectrometer are

extensively being used in our experiments.

2. Sept. 1992 - Sept. 1996, University of Durham (U.K.), in development of the AC Technique to measure the

Specific Heat of Superconductors in High Magnetic Fields.

3. Sept. 1988 - Sept. 1990, Quaid-e-Azam University Islamabad, (Pakistan) in fabrication and characterization of

Bi-based High Tc Superconductors.

Publications: 115

Please see the List of Publications at the end of this C.V.

Participation in International Conferences and Seminars:

1. Invited speaker “The future of Renewable Energy Resources in Pakistan” at 14th National Symposium,

Frontier in Physics, Nov-23-25, 2016, GCU Lahore, Pakistan.

4

2. Invited speaker “Pairs of Donors and Acceptors based Inverted Hybrid Organic Devices” at “The 10th

ASEANIAN Conference on Nano-Hybrid Solar Cell, Sep. 20-24, 2016, NCEPU, Beijing, China.

3. Presentation entitled “Renewable Energy, for a Better Tomorrow” at First Pakistan - US S&T Cooperation

Program Symposium: Economic Growth through Technology Transfer, Jan. 31 – Feb. 01, 2013, Islamabad,

Pakistan.

4. Oral Presentation in the field of Solar Cell Applications at International Conference on Power Generation

Systems and Renewable Energy Technologies, (PGSRET-2010), Nov. 29 to Dec. 2, 2010, Islamabad,

Pakistan.

5. Abstract accepted for Poster/Oral Presentation in the field of Nano-Structured and Nano-Technology at 2nd

International Conference on Frontier of Advanced Engg. Materials,(FAEM-2006), 04-06 Dec. 2006, Lahore.

6. Abstract accepted for Oral Presentation at CIIT-ISESCO School on “Surfaces, Thin Films, Nano-Structured

and Applications” organized by COMSATS held in Lahore/Islam Abad during Oct. 27 to Nov. 03, 2006.

7. Poster and Oral Presentation at 21st Workshop/Conference on “Novel Materials and Superconductivity”, held

in Planneralm, Austria, Feb. 11-18, 2006.

8. Topics in Semiconductors & Workshop on Nano Technologies at Qauid-e-Azam University Islam Abad,

Pakistan, April 12-17, 2004.

9. Intel® Teach to the Future, with support from Microsoft, Master Training Program, by "COMSAT" Model

Town, Lahore in March-April 2002.

10. Faculty Training Workshop, at Institute of Leadership and Management (ILM), Lahore, in Mar. 1999.

11. Presentation of a poster in Applied Superconductivity Conference, 1995, Edinburgh, (U.K.).

12. Growth and characterization of single crystals, 1995, Birmingham, (U.K.).

13. M2HTSC-IV (Applied Superconductivity) 1994, Grenoble, France.

14. Presentation of posters at various Conferences & Seminars on Condensed Matter Physics held in Leeds,

Warwick, Liverpool, London, Cambridge, Birmingham etc. (U.K.) during 1992 to 1996.

Seminar delivered:

1. Invited lecture on “The Future of 3rd Generation Solar Cells”, at International conference “Materials-2015”

held on April 22-23, 2015 at the University of Peshawar, KPK, Pakistan.

2. Invited lecture on “Organic Solar Cells, A Road Ahead” at International Workshop on Material Modeling

and Simulation (IWMMS-2013) held on July 03-06, 2013 at the University of Malakand, KPK, Pakistan.

3. "Phase Transition in Nanostructures Materials" delivered on March 02, 2010, at International Scientific

Spring 2010 held on March 1-6, 2010 at NCP, Islamabad, Pakistan.

4. “Complex Nano-Structured CMR Materials” delivered on June 21st, 2006 to the joint gathering of Depts.

of Physics, KF. University, Graz and Technical University of Graz, Austria.

5. “Physical Properties of Rare Earth Manganites”, Poster and Oral Presentation at 21st

Workshop/Conference, on Novel Materials and Superconductors, February 11 – 18, 2006, at

Universitätssportheim Planneralm, Austria.

6. On Nano Science and Nano Technology, at HEC. Lahore Oct. 2004.

7. On High Temperature Superconductors and their Applications at:

a). Ghulam Ishaque Khan Institute, Topi.

b). Navy Engineering College, Karachi,

8. On Specific Heat of High Temperature Superconductors in very high magnetic fields (15 T).

a). University of Warwick. (U.K.).

b). University of Durham. (U.K.).

Courses Designed:

1. Advanced Microscopic Techniques for Ph.D. Degree at Govt. College Univ. Lahore, Pakistan, 2010.

2. Physics of Nano-Scale Materials and Nanotechnology for Ph.D. Degree at Govt. College Univ. Lahore

2009.

3. Nano-Structures and Nano-Technology for M.Phil. Degree at Govt. College Univ. Lahore 2006.

4. Advanced Solid State Physics Course for M.Phil. Classes at Govt. College University, Lahore 2004.

5. Methods of Experimental Physics for M. Sc. classes at Govt. College University, Lahore 2004.

6. Modification of Solid State and Statistical Physics courses for Post-Graduate Classes at Govt. College

University, Lahore 2002.

7. Advanced Electronics Course for Lahore University, Lahore 2002.

Collaboration Developed:

1. Prof. Ismat Shah, Dept. of Material Science and Engg. University of Delaware, 208 Dupont Hall,

Newark, DE 19716, Ismat@udel.edu.

5

2. Prof. Heinz Krenn, Head, Institute of Physics, Karl Franzens-Universität Graz, Austria. (Expert in

Magnetic Properties and Nanotechnology). E.mail: heinz.krenz@uni-graz.at.

3. Prof. Peter Knoll, Institute of Physics, Karl Franzens-Universität Graz, Austria. (Expert in Raman

Spectroscopy and Nanotechnology). E.mail: peter.knoll@uni-graz.at

4. Prof. Wolfgang Lang, Institute of Material Physics, University of Vienna, Austria. (Expert in Transport

Measurements). E.mail: wolfgang.lang@univie.ac.at.

5. Prof. Dr. Muhammad Hassan Sayyad, GIK Institute, Topi, Swabi, Pakistan. (Expert in optical

properties).

6. Dr. Muhammad Afzal Kamboh, Pakistan Council for Renewable Energy Resources, (PCRET),

Islamabad, Pakistan.

Member of Editorial Review Board:

1. Solar Energy

2. Journal of Nanoparticle Research

3. Materials Letters

4. Senior Member of International Association of Computer Science and Information

Technology, (IACSIT), Membership No. 80332515.

5. Scientific Journal International.

6. Jr. of Natural Sciences & Mathematics

References:

1). Prof. Dr. Hassan A. Shah, Ex-Chairperson, Dept. of Physics, and Ex-Vice Chancellor of Govt. College University,

Lahore, Pakistan. Mobile Phone: 0092-321 4437750.

2). Prof. Dr. Riaz Ahmad, Chairperson, Dept. of Physics, Govt. College University, Lahore, Pakistan. Phone: 009242-

99211637.

3). Prof. Dr. Asghari Maqsood, Dept. of Physics, Air University, Islamabad, Pakistan. Contact No: 009251-828187.

CHAPTER TITLE: Electrochemical Exfoliation of 2D Advanced Carbon Derivatives

BOOK TITLE: 21st Century Advanced Carbon Materials for Engineering Applications - A

Comprehensive Handbook

ISBN: 978-1-78985-912-6

6

List of Publications by Prof. Dr. Salamat Ali, Dept. of Physics, Riphah International University

Islamabad, (Lahore Campus).

JCR Total Impact Factor, (220.266) till 30-06-2021

1. M. Ikram, S. Hayat, M. Imran, A. Haider, S. Naz, A. Ul-Hamid, I. Shahzadi, J. Haider, A. Shahzadi,

W. Nabgan, S. Ali, Novel Ag/cellulose-doped CeO2 quantum dots for efficient dye degradation and

bactericidal activity with molecular docking study. Journal: Carbohydrate Polymers, 209 (2021)

118346, https://doi.org/10.1016/j.carbpol.2021.118346, Publication date: 17/06/2021

Impact Factor: 9.381 (2021), Publisher: Elsevier

2. Muhammad Ikram, Abeera Mahmood, Ali Haider, Sadia Naz, Anwar Ul-Hamid,

Walid Nabgan, Iram Shahzadi, Junaid Haider, Iqbal Ahmad, Salamat Ali, Dye degradation,

antibacterial and in-silico analysis of Mg/cellulose-doped ZnO nanoparticles, International Journal of

Biological Macromolecules, Volume 185, 31 August 2021, Pages 153-164, Online 19-June 2021.

Impact Factor: 6.953 (2021) Publisher: Elsevier

3. Muhammad Ikram, Muhammad Wakeel, Jahanzeb Hassan, Ali Haider, Sadia Naz, Anwar Ul-Hamid,

Junaid Haider, Salamat Ali, Souraya Goumri-Said & Mohammed Benali Kanoun, Impact of Bi

Doping into Boron Nitride Nanosheets on Electronic and Optical Properties Using Theoretical

Calculations and Experiments, Nanoscale Research Letters Volume 16, Article number: 82 (2021).

DOI: https://doi.org/10.1186/s11671-021-03542-x. Published 12 May, 2021.

Impact Factor: 4.703 (2021) Publisher: Springer

4. Ali Raza, Usman Qumar, Ali Haider, Sadia Naz, Junaid Haider, Anwar Ul-Hamid, Muhammad

Ikram, Salamat Ali, Souraya Goumri-Said and Mohammed Benali Kanoun, Liquid-phase

exfoliated MoS2 nanosheets doped with p-type transition metals: a comparative analysis of

photocatalytic and antimicrobial potential combined with density functional theory, Dalton

Transactions, 50 ( 2021) 6598-6619. https://doi.org/10.1039/D1DT00236H, Publication date: April

12, 2021.

Impact Factor: 4.390 (2021) Publisher: Royal Society of Chemistry

5. High Temperature Superconductors, By Muhammad Ikram, Ali Raza, Shehnila Altaf, Arslan Ahmed

Rafi, Misbah Naz, Sarfraz Ali, Syed Ossama Ali Ahmad, Ayesha Khalid, Salamat Ali and Junaid

Haider, Transition Metals [Working Title of the Book], March 10th 2021, DOI:

10.5772/intechopen.96419

Publisher: IntechOpen, U.K. (www.intechopen.com) March 10, 2021

7

6. Asma Rafiq, Muhammad Ikram, S. Ali, Faiza Niaz, Maaz Khan, Qasim Khan, Muhammad Maqbool,

Photocatalytic degradation of dyes using semiconductor photocatalysts to clean industrial water

pollution, Journal of Industrial and Engineering Chemistry , Volume 97, 25 May 2021, Pages 111-

128, DOI: https://doi.org/10.1016/j.jiec.2021.02.017.

Impact Factor: 6.064 (2021) Publisher: Elsevier, Feb. 2021

7. Ali Raza, Jahan Zeb Hassan, Muhammad Ikram, Salamat Ali, Umer Farooq, Qasim Khan, and

Muhammad Maqbool, Advances in Liquid-Phase and Intercalation Exfoliations of 2D-Transition

Metal Dichalcogenides, Advanced Materials Interfaces, 2021, pp. 2002205,

https://doi.org/10.1002/admi.202002205.

Impact Factor: 6.147 (2021) Publisher: Wiley Published in Feb. 2021

8. Carbon Nanotubes, A. Ahmed Rafi and S. Ali M. Ikram, A. Raza, A, Shahbaz, H. Ijaz, S. Ali, A.

Haider, M. T. Hussain, J. Haider, Sol Gel and other Fabrication Methods of Advanced Carbon

Materials [Working Title of the Book], pp. dx.doi.org/10.5772/intechopen.95442.

Publisher: IntechOpen, U.K. (www.intechopen.com) Dec. 2020

9. Electrochemical Exfoliation of 2D Advanced Carbon Derivatives, Muhammad kram, Ali Raza,

Sarfraz Ali and Salamat Ali, Sol Gel and other Fabrication Methods of Advanced Carbon Materials

[Working Title of the Book] DOI: 10.5772/intechopen.94892.

Publisher: IntechOpen, U.K. (www.intechopen.com), Dec. 2020

10. M. Ikram, M. I. Khan, A.Raza, M. Imran, A. Ul-Hamid, S. Ali, Outstanding performance of silver-

decorated MoS2 nanopetals used as nanocatalyst for synthetic dye degradation, Physica E: Low

Dimensional Systems & Nanostructures, Volume 124, October 2020, 114246 ,

https://doi.org/10.1016/j.physe.2020.114246

Impact Factor: 3.382 (2021) Publisher: Elsevier, Oct. 2020

11. Muhammad Ikram, Sarfraz Ali, Muhammad Aqeel, Anwar Ul-Hamid, Muhammad Imran, Junaid

Haider, Ali Haider, Atif Shahbaz, Salamat Ali; “Reduced graphene oxide nanosheets doped by Cu

with highly efficient visible light photocatalytic behavior”, Journal of Alloys and Compounds, 837

(2020) 155588

Impact Factor: 5.316 (2021) Publisher: Elsevier, Oct. 05, 2020

12. M. Ikram, I. Hussain, J. Hassan, A. Haider, M. Imran, M. Aqeel, A. Ul-Hamid, S. Ali, Evaluation of

antibactrial and catalytic potential of copper-doped chemically exfoliated boron nitride nanosheets,

Ceramics International, 46 (13) (2020) 21073–21083, https://doi.org/10.1016/j.ceramint.2020.05.180

Impact Factor: 4.527 (2021) Publisher: Elsevier, Sep. 2020

13. M. Ikram, J. Hassan, A. Raza, A. Haider, S. Naz, A. Ul-Hamid, J. Haider, I. Shahzadi, U. Qamar

8

and S. Ali, Photocatalytic and bactericidal properties and molecular docking analysis of TiO2

nanoparticles conjugated with Zr for environmental remediation. RSC Adv., 2020, 10, 30007-30024,

DOI: 10.1039/d0ra05862a. published Aug. 07, 2020.

Impact Factor: 3.361 (2021) Publisher: Royal Society of Chemistry,

14. M. Ikram, E. Umar, A. Raza, A. Haider, S. Naz, A. Ul-Hamid, J. Haider, I. Shahzadi, J. Hassan and

S. Ali , Dye degradation performance, bactericidal behavior and molecular docking analysis of Cu-

doped TiO2 nanoparticles, RSC Adv., 10 (2020) 24215-24233,

https://doi.org/10.1039/D0RA04851H. 25 June 2020.

Impact Factor: 3.10 (2018) Publisher: Royal Society of Chemistry,

15. O. Inyang, A. Rafiq, C. Swindells, S. Ali & D. Atkinson, The role of low Gd concentrations on

magnetisation behaviour in rare earth: transition metal alloy films, Scientific Reports, 10 (2020) 9767.

https://doi.org/10.1038/s41598-020-66595-5 ., 17 June 2020

Impact Factor: 4.011 (2018) Publisher: Nature

16. A. Raza, U. Qumar, J. Hassan, M. Ikram, A. Ul-Hamid, J. Haider, M. Imran, S. Ali, A Comparative

Study of Dirac 2D Materials with TMDCs and 2D Insulators with regards to their Structures and

Applications, Applied Nanoscience, 2020, https://doi.org/10.1007/s13204-020-01475-y , 03 June

2020.

Impact Factor: 3.198 (2018) Publisher: Springer

17. M. Ikram, R. Tabassum, U. Qumar, S. Ali, A. Ul-Hamid, A. Haider, A. Raza, M. Imran, S. Ali,

Promising Performance of Chemically Exfoliated Zr-doped MoS2 Nano Sheets for Catalytic and

Antibacterial Applications, RSC Advances, 10 (2020) 20559-20571, DOI: 10.1039/D0RA02458A.

May 29, 2020.

Impact Factor: 3.10 (2018) Publisher: Royal Society of Chemistry

18. M. Aqeel, M. Ikram, A. Asghar, A. Haider, A. Ul-Hamid, M. Naz, M. Imran, S. Ali, Synthesis of

capped Cr-doped ZnS nanoparticles with improved bactericidal and catalytic properties to treat

polluted water, Applied Nanoscience, 10, (2020) 2045–2055. DOI: 10.1007/s13204-020-01268-3.

2020. Feb. 08, 2020.

Impact Factor: 3.198 (2018) Publisher: Springer

9

19. M. Ikram, A.Raza, M. Imran, A. Ul-Hamid, S. Ali, Hydrothermal Synthesis of Silver Decorated

Reduced Graphene Oxide (rGO) Nanoflakes with effective Photocatalytic Activity for Wastewater

Treatment, Nanoscale Research Letters 10.1186/s11671-020-03323-y, 2020. April 28, 2020.

Impact Factor: 3.159 (2018) Publisher: Springer

20. J. Hassan, M. Ikram, A. Ul-Hamid, M. Imran, S. Ali, Application of boron nitride nanosheets doped

with Co to remove organic pollutants from textile water, Nanoscale Research Letters, 15, 75, 2020.

DOI: 10.1186/s11671-020-03315-y ,

Impact Factor: 3.159 (2018) Publisher: Springer

21. M. Ikram, J. Hassan, M. Imran, J. Haider, A. Ul-Hamid, I. Shazadi, M. Ikram, A. Raza, U. Qumar, S.

Ali, 2D chemically exfoliated hexagonal boron nitride (hBN) nanosheets doped with Ni: Synthesis,

properties and catalytic application for the treatment of industrial wastewater, Applied Nanoscience,

2020. DOI: 10.1007/s13204-020-01439-2

Impact Factor: 3.198 (2018) Publisher: Springer

22. U. Qumar, M. Ikram, M. Imran, A. Haider, A. Ul-Hamid, K. N. Riaz, S. Ali, Synergetic effect of Bi

decorated into exfoliated MoS2 nanosheets on its bactericidal and dye degradation potential, Dalton

Transactions, 2020, 49, 5362–5377.

Impact Factor: 4.052 (2018) Publisher: Royal Society of Chemistry

23. M. Ikram, I. Jahan, A. Haider, J. Hassan, A. Ul-Hamid, M. Imran, J. Haider, A. Shahzadi, A.

Shahbaz, S. Ali, Bactericidal Behavior of Chemically Exfoliated Boron Nitride Nanosheets doped

with Zirconium, Applied Nanoscience, 10 (2020)2339-49, https://doi.org/10.1007/s13204-020-01412-

z, April 2020.

Impact Factor: 3.198 (2018) Publisher: Springer

24. Ali Raza, Muhammad Ikram, Muhammad Aqeel. Muhammad Imran, Anwar Ul-Hamid, Khalid

Nadeem Riaz, Salamat Ali, “Enhanced industrial dye degradation using Co doped in chemically

exfoliated MoS2 nanosheets”, Applied Nanoscience (Dec. 2019), https://doi.org/10.1007/s13204-

019-01239-3.

Impact Factor: 3.198 (2018) Publisher: Springer

25. Muhammad Ali, Saira Sharif, Shairi Anjum, Muhammad Imran, Muhammad Ikram, Misbah Naz and

Salamat Ali, “Preparation of Co and Ni doped ZnO nanoparticles served as encouraging nano-

10

catalytic application” “Materials Research Express” (Dec. 2019), DOI: https://doi.org/10.1088/2053-

1591/ab6383.

Impact Factor: 1.449 (2018), Publisher: Inst. of Physics, UK

26. Hassan Azal; Muhammad Ikram,; S. Ali,; Anum Shahzadi; , Muhammad Aqeel; Ali Haider; ,

Muhammad Imran; Salamat Ali; "Enhanced drug efficiency of doped ZnO-GO (Graphene oxide)

nanocomposites, a new gateway in drug delivery systems (DDSs)", “Materials Research Express”

(Dec. 2019), DOI: https://doi.org/10.1088/2053-1591/ab61ae.

Impact Factor: 1.449 (2018), Publisher: Inst. of Physics, UK

27. T. Shujah, M. Ikram, A.R.Butt, M.K.Shahzad, K.Rashid, Q. Zafar, and S. Ali: H2S Gas Sensor Based

on WO3 Nanostructures Synthesized via Aerosol Assisted Chemical Vapor Deposition Technique,

Nanoscience and Nanotechnology Letters, Vol. 11(9) (2019) 1247–1256, DOI:

10.1166/nnl.2019.3011.

Impact Factor: 2.917 (2017) Publisher: American Scientific Publishers (ASP)

28. T. Shujah; M. Ikram; A. R. Butt; S. Hussain; M. K. Shahzad; Q. Zafar, S. Ali; Growth of Zinc Oxide

and Zinc Stannate Nanostructured Thin Films for Carbon Monoxide Sensing Application,

Nanoscience and Nanotechnology Letters, 11(8) (2019), 1050-1059, DOI:

https://doi.org/10.1166/nnl.2019.2987

Impact Factor: 2.917 (2017) Publisher: American Scientific Publishers (ASP)

29. U. Sattar, M. Ikram, M. Junaid, M. Aqeel, M. Imran, and S. Ali, Annealing effect on synthesized

ZnS/TiO2 nanocomposite for treatment of industrial wastewater, Materials Research Express,

6(11)(2019) 115050, https://doi.org/10.1088/2053-1591/ab476c.

Impact Factor: 1.449 (2018), Publisher: Inst. of Physics, UK

30. Asma Rafiq, Muhammad Imran, Muhammad Aqeel, Muhammad Ikram, Hamid Majeed, Syed

Ghazanfar Hussain, and Salamat Ali, “ZnS–Ni Doped Nanoparticles Served as Promising Nano-

Photocatalyst (Industrial Dye Degrader)”, Nanoscience and Nanotechnology Letters, Vol. 11(8)

(2019) 1060-1069, 1–10, doi:10.1166/nnl.2019.2991,

Impact Factor: 2.917 (2017) Publisher: American Scientific Publishers (ASP)

31. A. Rafiq, M. Imran, M. Aqeel, M. Naz, M. Ikram, S. Ali, Study of Transition Metal Ion Doped CdS

Nanoparticles for Removal of Dye from Textile Wastewater, “Journal of Inorganic and

Organometallic Polymers and Materials” https://doi.org/10.1007/s10904-019-01343-5,

Impact Factor: 1.637 (2019) Publisher: Springer

11

32. M Aqeel, S Anjum, M Imran, M Ikram, H Majeed5, M Naz6, S Ali1,7 and M A Ahmad2 , TiO2 @

RGO (reduced graphene oxide) doped nanoparticles demonstrated improved photocatalytic activity,

Materials Research Express, 6(8) (2019) 086215, https://doi.org/10.1088/2053-1591/ab244a

Impact Factor: 1. 449 (2018), Publisher: Inst. of Physics, UK

33. A. Wahab; M. Imran, M. Ikram, M. Naz, M. Aqeel, A. Rafiq, H. Majeed, S. Ali, Dye degradation

property of cobalt and manganese doped iron oxide nanoparticles, “Applied Nanoscience” :

2019/01/31, DOI: 10.1007/s13204-019-00970-1

Impact Factor: 3.325 (2016) Publisher: Springer

34. M. Nafees, A. R. Butt, S. Ali, A Haider, M. R. Butt, M. Shamoon, J. Haider, I. Shahzadi, S. Ali, M.

Ijaz and M. Ikram, Metal Oxide Nanoparticles for Cellular Response, Anti-Cancer Drugs Loading and

Adsorption Kinetics, “Nanoscience and Nanotechnology Letters (NNL)”, 11 (2019) 1-10,

doi:10.1166/nnl.2019.2904.

Impact Factor: 2.917 (2017) Publisher: American Scientific Publishers (ASP)

35. M. Junaid, M. Imran, Muhammad Ikram; M. Naz, M. Aqeel; H. Afzal; H. Majeed, S. Ali, The study

of Fe doped CdS nanoparticles assisted photocatalytic degradation of organic dye in waste water,

“Applied NanoScience” (2019)1-10. https://doi.org/10.1007/s13204-018-0933-3.

Impact Factor: 3.325 (2016) Publisher: Springer

36. A Rafiq, M Imran, M Ikram , M Naz, M Aqeel, H Majeed, S G Hussain and S Ali, Photocatalytic and

catalytic degradation of organic dye by uncapped and capped ZnS quantum dots, “Materials Research

Express”, 6 (2019) 055801; https://doi.org/10.1088/2053-1591/aaff8e,

Impact Factor: 1.151 (2017), Publisher: Inst. of Physics, UK

37. M. Imran, M. Ikram, S. Anum, S. Ali, Y. Huang; "Highly Efficient Hybrid Bulk Heterojunction

Organic Solar Cells Integrating PbS Nanoparticles," “Nanoscience and Nanotechnology Letters

(NNL)”, 10 (12) (2018) 1644-1650, https://doi.org/10.1166/nnl.2018.2840

Impact Factor: 2.917 (2017) Publisher: American Scientific Publishers (ASP)

38. Werda Tus Salam, Muhammad Ikram; A Shahzadi, Muhammad Imran, Muhammad Junaid,

Muhammad Aqeel, Misbah Naz, Muhammad Nafees, Syed Ghazanfar Hussain, Salamat Ali,

“Doping, Dependent Structural, Optical, Thermal and Catalysis Properties of Synthesized Cadmium

Sulfide Nanoparticles," “Nanoscience and Nanotechnology Letters (NNL)”.10(12) (2018) 1662-

1670, https://doi.org/10.1166/nnl.2018.2839

12

Impact Factor: 2.917 (2017) Publisher: American Scientific Publishers (ASP)

39. Aroosa Saleem; Imran, Muhammad; Shahzadi, Anum; Junaid, Muhammad; Majeed, Hamid; Rafiq,

Asma; Shahzadi, Iram; Ikram, Muhammad; Naz, Misbah; Ali, Salamat; "Drastic improvement in

catalytic, optical and visible-Light photocatalytic behavior of cobalt and nickel doped TiO2

nanopowder" Materials Research Express, 6(1) (2019) 015003,

iopscience.iop.org/article/10.1088/2053-1591/aae28e

Impact Factor: 1.151 (2017), Publisher: Inst. of Physics, UK

40. M. Naz, M. Zahid Qureshi, A. Shahbaz, A. Haider, M. Ikram, M. Nafees, A. Shahzadi, T. Bashir, S. Ali,

A. Tricoli, Bio-Inspired Synthesis of Silver Nanoparticles: Anticancer Drug Carrier, Catalytic and

bactericidal Potential, ‘Nanoscience and Nanotechnology Letters’, 10 (2018) 1–11.

Impact Factor: 2.917 (2017) Publisher: American Scientific Publishers (ASP)

41. Syeda Amber Yousaf; Muhammad Ikram; Salamat Ali, "The Critical Role of Metal Oxide Electron

Transport Layer for Perovskite Solar Cell", ‘Applied NanoScience’, 8(6) (2018) 1515 - 1522.

https://doi.org/10.1007/s13204-018-0836-3.

Impact Factor: 3.325 (2016) Publisher: Springer

42. Syeda Amber Yousaf; Muhammad Ikram; Salamat Ali, Compositional Engineering of Acceptors for

Highly Efficient Bulk Heterojunction Hybrid Organic Solar Cells, “Journal of Colloid and Interface

Science” 527 (2018) 172–179, https://doi.org/10.1016/j.jcis.2018.05.027.

Impact Factor: 5.091 (2017) Publisher: Elsevier

43. M. Imran, M. Ikram, A. Shahzadi, S. Dilpazir, H. Khan, I. Shahzadi, S. Amber Yousaf, S. Ali, J.

Geng, and Y. Huang, “High-performance solution-based CdS-conjugated hybrid polymer solar cells”,

“RSC Advances”, 8 (2018) 18051-18058, DOI: 10.1039/c8ra01813h

Impact Factor: 3.108 (2016) Publisher: Royal Society of Chemistry

44. Syeda Amber Yousaf; Muhammad Ikram; Salamat Ali "Significantly improved the efficiency of

organic solar cells incorporating Co3O4 NPs in the active layer" ‘Applied NanoScience’, 8(3) (2018)

489–497, DOI.10.1007/s13204-018-0726-8,

Impact Factor: 3.325 (2016) Publisher: Springer

45. M. Waseem Akram, Muhammad Fakhar-e-Alam, Alvina Rafiq Butt, T. Munir, Akbar Ali, K. S.

Alimgeer, Khalid Mehmood-ur-Rehman, Seemab Iqbal, Salamat Ali, Muhammad Ikram, N. Amin,

and Zhiming M. Wang, Magnesium Oxide in Nanodimension: Model for MRI and Multimodal

Therapy, Journal of Nanomaterials, 2018, Article ID 4210920, 12 pages.

https://doi.org/10.1155/2018/4210920, https://www.hindawi.com/journals/jnm/aip/4210920/,

Impact Factor: 2.207 (2016) Publisher: Hindawi

13

46. K. Iqbal, M. Ikram, M. Afzal, S. Ali, “Efficient, low-dimensional nanocomposite bilayer CuO/ZnO

solar cell at various annealing temperatures, “Materials for Renewable and Sustainable Energy”

(2018) 7:4, https://doi.org/10.1007/s40243-018-0111-2

Impact Factor: New Journal Publisher: Springer

47. M. Manzoor, A. Rafiq, M. Ikram, M. Nafees, S. Ali, Structural, Optical and Magnetic Study of Ni

doped TiO2 Nanoparticles Synthesized by Sol-Gel Method, International Nano Letters, DOI

10.1007/s40089-018-0225-7, 2018.

Impact Factor: New Journal Publisher: Springer

48. Rabeea Zahid; Maria Manzoor; Asma Rafiq; Muhammad Ikram; Muhammad Nafees; Salamat Ali,

"Influence of iron doping on structural, optical and magnetic properties of TiO2 nanoparticles"

‘Electronic Materials Letters’, https://doi.org/10.1007/s13391-018-0060-z

Impact Factor: 2.882 (2016) Publisher: Springer

49. Misbah Naz, Ali Haider, Muhammad Ikram, Muhammad Zahid Qureshi, and Salamat Ali, "Green

synthesis (A. indica seed extract) of silver nanoparticles (Ag-NPs), Characterization, their catalytic &

bactericidal action potential, “Nanoscience and Nanotechnology Letters (NNL)”,

9(11) (2017) 1649–1655, doi:10.1166/nnl.2017.2517.

Impact Factor: 2.917 (2016) Publisher: American Scientific Publishers (ASP)

50. Muhammad Imran; Muhammad Ikram; Muhammad Nafees; Salamat Ali, J. Geng, "Towards

efficient and cost-effective inverted hybrid organic solar cells using inorganic semiconductor in the

active layer" “Applied NanoScience”, 7(8) (2017) 747–752, DOI 10.1007/s13204-017-0618-3.

Impact Factor: 3.325 (2016) Publisher: Springer

51. M. Naz, N. Nasiri, M. Ikram, M. Nafees, M. Z. Qureshi, S. Ali, A. Tricoli, “Eco-friendly biosynthesis,

anticancer drug loading and cytotoxic effect of capped Ag nanoparticles against breast cancer”,

“Applied NanoScience”, 7 (8) (2017) 793–802, DOI 10.1007/s13204-017-0615-6

Impact Factor: 3.325 (2016) Publisher: Springer

52. M. Nafees, M. Ikram, S. Ali, Thermal Stability of Lead Sulfide and Lead Oxide Nano-Crystalline

Materials, “Applied Nanoscience”, 7(7) (2017)399–406, DOI 10.1007/s13204-017-0578-7

Impact Factor: 3.325 (2016) Publisher: Springer

14

53. S. Ali, “The future of Renewable Energy Resources in Pakistan” Presentation as an Invited Speaker at

14th National Symposium, Frontier in Physics, GCU Lahore, Pakistan, Nov-23-25, 2016.

54. S. Ali, “Pairs of Donors and Acceptors based Inverted Hybrid Organic Devices” Presentation as an

Invited Speaker, “The 10th ASEANIAN Conference on Nano-Hybrid Solar Cells” held at North China

Electric Power University, Beijing, China during Sep. 20-24, 2016.

55. S. Ali, “Renewable Energy Resources and their Future in Pakistan, Presentation as a key note speaker,

“2nd International Conference on Biotechnology (ICB): Challenges and Opportunities in Pakistan”

held on Feb 24-25, 2016 at University of South Asia (USA), Lahore.

56. M. MOOSA, M. IKRAM, S. ALI, ISLAH-U-DIN, Microemulsion based synthesis of inorganic

barium sulphate nanoparticles using various cosurfactants, JOURNAL OF OPTOELECTRONICS

AND ADVANCED MATERIALS, 18( 9-10) (2016)847 – 851

Impact Factor: 0.383 (2015) Publisher: INOE Publishing House, Romania

57. M. Ikram, R. Murray, M. Imran, S. Ali and S. I. Shah, “Enhanced Performance of P3HT/

(PCBM:ZnO:TiO2) Blend based Hybrid Organic Solar Cells” “Materials Research Bulletin”, 75

(2016) 35–40, DOI:10.1016/j.materresbull.2015.11.031.

Impact Factor: 2.873 (2016) Publisher: Elsevier

58. T. Shujah, A. Butt, M. Ikram, S. Shabbir, S. Ali "Effect of deposition temperature variation on thin

films synthesis via AACVD", Digest Journal of Nanomaterials and Biostructures, 11(3) (2016). 891 –

898. http://www.chalcogen.ro/891_ShujahT.pdf

Impact Factor: 1.12 (2013), Publisher: Virtual Institute of Physics,

59. A. R. Butt, I.A. Butt, A. Nazir, M. Ikram, S. Sadiq, K. Rashid, T. Shujah and S. Ali, “Molecular

Imaging of CaO Nanowhiskers in Living Organs”, The Nucleus, 52 (4) (2015) 159-164.

60. M. Ikram, M. Imran, J.M. Nunzi, Islah-u-din & S. Ali, “Replacement of P3HT and PCBM with Metal

Oxides Nanoparticles in Inverted Hybrid Organic Solar Cells”, “Synthetic Metals” 210 (2015) 268–

272, doi:10.1016/j.synthmet.2015.10.005

Impact Factor: 2.526 (2014), Publisher: Elsevier, [53.613]

61. M. Ikram, M. Imran, J.M. Nunzi & S. Ali, “Efficient inverted hybrid solar cells using both CuO and

P3HT as an electron donor materials”, “Jounnal of Materials Science: Materials in Electronics”, 26(9)

(2015) 6478-6483, DOI 10.1007/s10854-015-3239-1.

Impact Factor: 2.324 (2014), Publisher: Springer,

15

62. M. Ikram, S. Ali, R. Murray, A. Hussain, Islah-u-din and S. I. Shah, “Influence of fullerene derivative

replacement with TiO2 nanoparticles in organic bulk hetero-junction solar cells”, “Current Applied

Physics”, 15(2015) 48-54. doi:10.1016/j.cap.2014.10.026

Impact Factor: 2.058 (2014), Publisher: Elsevier,

63. Muhammad Ikram, Muhammad Imran, J. M. Nunzi, S. R. Bobbara, Salamat Ali and Islah-u-din,

Efficient and low cost inverted hybrid bulk heterojunction solar cells, J. Renewable and Sustainable

Energy 7, (2015) 043148, http://dx.doi.org/10.1063/1.4929603

Impact Factor: 1.51 (2012), Publisher: AIP Publishing,

64. A. R. Butt, S. Ejaz, J. C. Baron, M. Ikram, S. Ali, "CaO nanoparticles as a potential drug delivery

agent for biomedical applications", “Digest Journal of Nanomaterials and Biostructures”, 10(3) (2015)

799 - 809. http://www.chalcogen.ro/799_Butt.pdf.

Impact Factor: 1.12 (2013), Publisher: Virtual Institute of Physics,

65. M. Nafees, M. Ikram, S. Ali, "Thermal behavior and decomposition of copper sulfide nanomaterial

synthesized by aqueous sol method", “Digest Journal of Nanomaterials and Biostructures” 10(2)

(2015) 635 - 641. http://www.chalcogen.ro/635_Nafees.pdf

Impact Factor: 1.12 (2013), Publisher: Virtual Institute of Physics,

66. Khalid Rashid, Munir Ahmad, Salamat Ali, M. Z. Butt, Muhammad Nafees, Alvina Rafiq Butt,

“Comparison of Doxorubicin anticancer drug loading on different metal oxide nanoparticles”.

“Medicine” 94(11) (2015) e617. DOI: 10.1097/MD.0000000000000617

(Impact Factor: 4.87), Publisher: Wolters Kluwer,

67. S. Anjum, M. Ikram, S. Ali, “Hybrid Organic Solar Cells based on polymer/metal oxide nano-crystals”,

“Journal of Ovonic Research” 11(2) (2015) 85-89. http://www.chalcogen.ro/85_Anjum.pdf.

Impact Factor: 0.537 (2014), Publisher: Virtual Institute of Physics,

68. M. Ikram, R. Murray, A. Hussain, S. Ali and S. I. Shah, “Hybrid Organic Solar Cells using both ZnO

and PCBM as electron acceptor materials”, “Materials Science and Engineering B”, 189 (2014) 64-69.

Impact Factor: 3.316 (2014), Publisher: Elsevier,

69. M. Ikram, R. Murray, M. Nafees, M. Imran, S. Ali and S. Ismat. Shah, “Efficient Ternary Blended

Hybrid Organic Solar Cells: Fullerene Derivative Replacement with Metal Oxide Nanoparticles”

“Digest Journal of Nanomaterials and Biostructures” 9(3) (2014) 1271-1276.

Impact Factor: 1.123 (2014), Publisher: Virtual Institute of Physics,

70. M. Ikram, N. A. Niaz, N.R. Khalid, M. Ramzan, M. Imran and S. Ali, “Tetra Blended Based Hybrid

Bulk Heterojunction Solar Cells”, “Journal of Ovonic Research” 10(6) (2014) 257-263.

http://www.chalcogen.ro/257_Ikram.pdf 41.982

Impact Factor: 0.537 (2014), Publisher: Virtual Institute of Physics,

16

71. S. Ali, A. Zareen, M. Ikram, R. Murray, A. Hussain and S. I. Shah “Effect of mixing ZnO: TiO2

Nanoparticles in P3HT:PCBM Solar Cells” “European Scientific Journal”, 2 (2014) 457-461.

72. A. Zareen, S. Ali, M. Irfan, “The Effect of Annealing Temperatures on Phase and Optical Properties of

TiO2 Nano-particles for Solar Cell Applications” “European Scientific Journal”, 2 (2014) 462-465.

73. Mahnoor Alamgir, Salamat Ali, Muhammad Ikram, Shairi Anjum “Role of Heat Treatment on

Performance of Dye Sensitized Solar Cells” a poster presentation in “International Conference on

Physics and Contemporary Needs” held in G. C. University, Lahore, Pakistan. Nov. 19-21, 2014.

74. Shairi Anjum, Salamat Ali, Muhammad Ikram, Mahnoor Alamgir, “Fabrication and characterization

of hybrid organic solar cells based on polymer/metal oxide nano-crystals” a poster presentation in

“International Conference on Physics and Contemporary Needs” held in G. C. University, Lahore,

Pakistan. Nov. 19-21, 2014.

75. Roy Murray, Noppom Rujisamphan, Salamat Ali, Steve Hegedus, and Syed Ismat Shah, “ Current-

voltage analysis of annealing effects of poly (3-hexlythiophene) and phenyl-C61-butyric acid methyl

ester organic solar cells," “Journal of Photonics for Energy (JPE)” 3(1) (2013) 032098. doi:

10.1117/1.JPE.3.032098.

Impact factor: 1.381 (2014), Publisher: SPIE (USA).E

(ICREE 2013)

76. S. Ali, S. Ismat Shah, Presentation entitled “Renewable Energy, for a Better Tomorrow” at First

Pakistan - US S&T Cooperation Program Symposium: Economic Growth through Technology

Transfer, Jan. 31 – Feb. 01, 2013, Islamabad, Pakistan.

77. M. Ahmd, K. Rashid, M. Nadeem, K. Masood, S. Ali, M. Nafees, N. Gull, Mumtaz-ul-Haq, N.

Ibrahim, A. Saeed, A. Qureshy, F. Aleem, H. Naseer, S. Mehmood, and S. W. Hyder, A Simple

Method to Prepare Aqueous Dispersion of Iron Oxide Nanoparticles and Their Biodistribution Study,

Journal of Colloid Science and Biotechnology, 1(2) (2012) 201–209,

Impact Factor: Still computing (New Journal), Publisher: American Scientific Publishers

78. Shahzad Sharif, Islam Ullah Khan, Onur Şahin, Saeed Ahmad, Orhan Büyükgüngör, & Salamat Ali,

“Synthesis and Crystal Structures of a Lanthanum(III) 1D Polymer and a Mixed-Ligand Cerium(III)

Binuclear Complex Derived from Pyridine-2,6-dicaboxylic Acid" Journal of Inorganic and

Organometallic Polymers and Materials, 22(4) (2012) 671-928, DOI 10.1007/s10904-012-9715-7

Impact Factor: 1.473 (2010) Publisher: Springer

17

79. Muhammad Nafees, Salamat Ali, Khalid Rashid, Saima Idrees, and Muhammad Ahsan Shafique, A

Simple Microwave assists aqueous route to synthesis CuS Nanoparticles and further aggregation to

spherical shape. Applied Nanoscience, 2012, DOI:10.1007/s13204-012-0113-9.

Impact Factor: 3.325 (2016) Publisher: Springer

80. Muhammad Nafees, Wasim Liaqat, Salamat Ali, Muhammad Ahsan Shafique, “Synthesis of

ZnO/Al:ZnO Nano-materials: structural and band gap Variation in ZnO Nano-materials by Al doping,

Applied Nanoscience, DOI: 10.1007/s13204-012-0067-y, Feb. 2012.

Impact Factor: 3.325 (2016) Publisher: Springer 31.516

81. M.A. Iqbal, W. Tahir, G. Murtaza Rai, N.A. Noor, Salamat Ali, K.T. Kubra, “An Investigation of the

titanium effect on the structural and magnetic properties of BaNi2 based W-type hexaferrites”,

Ceramics International, 38 (5) (2012)3757–3762, DOI:10.1016/ j.ceramint.2012.01.021.

Impact factor: 1.471 (2010) Publisher: Elsevier,

82. Muhammad Nafees, Salamat Ali, Khalid Rashid & Saima Idrees, “The novel and economical way to

synthesize CuS nanomaterial of different morphologies by aqueous medium employing microwaves

irradiation, Applied Nanoscience, 2(2)(2012) 157-162, DOI 10.1007/s13204-011-0050-z,

Impact Factor: 3.325 (2016), Publisher: Springer [22.918]

83. R. Murray, N. Rujisamphan, Salamat Ali, S. Hegedus, and S. Ismat Shah, Current-Voltage Analysis

of Annealing Effects of P3HT:PCBM, 2012 Organic Solar Cell Symposium and Global School for

Advanced Studies, Taipei, Taiwan September 2012.

84. Syed T. Hussain, Aisma Siddiqa, Muhammad Siddiq and Salamat Ali , "Iron doped Titanium Dioxide

Nanotubes: A Study of Electrical, Optical and Magnetic Properties", Journal of Nanoparticle Research,

13(12)(2011) 6517-6525, DOI 10.1007/s11051-011-0556-z,

Impact Factor: 3.250 (2010) Publisher: Springer

85. Arshad Mahmood, Shaista R, A. Shah, U. Aziz, E. Ahmed, S. Ali, Q. Raza, Ellipsometric analysis of

Cd (1-x)ZnxSe thin film prepared by thermal evaporation technique, Physica Scripta, 83 (2011) 065706.

http://iopscience.iop.org/1402-4896/83/6/065706

Impact Factor: 1.088 (2009) Publisher: Institute of Physics (IOP), U.K.

86. Islam Ullah Khan, Shahzad Sharif, Salamat Ali, Waqar Ahmad and Edward R. T. Tiekink, Methyl 2-

[(4-acetamidobenzene) sulfonamido] benzoate, Acta Cryst. E 67 (2011).o903

[ doi:10.1107/S1600536811009500]. http://journals.iucr.org/services/impactfactors.html

18

Impact Factor: 0.413 (2010) Publisher: International Union of Crystallography

87. I. U. Khan, W. Ahmad, S. Sharif, S. Ali and E. R. T. Tiekink, N,N- Dibenzyl-4-

methylbenzenesulfonamide, Acta Cryst. E 66 (2010) o1218 [ doi:10.1107/S1600536810015059 ].

Impact Factor: 0.413 (2010) Publisher: International Union of Crystallography

88. Aneeqa Sabah, Saadat Anwar Siddiqi and Salamat Ali, Fabrication and Characterization of CdS

Nanoparticles annealed by using different radiations, World Academy of Sciences, Engineering and

Technology, Issue 69, 2010.

89. S. A. Yousaf, and S.Ali, Effect of heating environment on Fluorine doped tin oxide (F: SnO2) thin films

for solar cell applications, International Conference on Power Generation Systems and Renewable

Energy Technologies (PGSRET), held in Islamabad, Pakistan from Nov. 29 to Dec. 02, 2010.

90. Mueed A. Mirza, and Salamat Ali, Synthesis and Magnetic studies of La0.5Ca0.5MnO3 Nanoparticles,

Proceedings of the Eleventh National Symposium of Frontier in Physics, pp. 403-412, held in GCU.

Lahore, Pakistan, from 29-31 Jan. 2009.

91. M. Zahir Iqbal and Salamat Ali, Effect of annealing temperature on the structural and transport

properties of La 0.67Ca0.33MnO3 Nanoparticles, Proceedings of the Eleventh National Symposium of

Frontier in Physics, pp. 413-421, held in GCU. Lahore, Pakistan, from 29-31 Jan. 2009.

92. Syed Ghazanfar Hussain, K.M. Bhutta, A.Rashid, and Salamat Ali, Controlled synthesis of S-doped

ZnO nanostructures: structural and optical properties. A paper presented at Pakistan Institute of Physics

(PIP) Conference, held in March. 2009, at Lahore Pakistan.

93. Syed Ghazanfar Hussain, Deming Liu, Xintang Huang, Salamat Ali and Muhammad Hassan Sayyad,

A Facile Route to HeterostructuredZnO:S/ZnONanorotors: Structural and Optical Properties, J. Phys.

Chem. C, 2008, 112 (30), pp 11162–11168, DOI: 10.1021/jp803323a

Impact Factor: 4.520 (2010) Publisher: Amer. Chem. Society, USA

94. Affia Aslam, S. K. Hasanain, G. Hassnain Jaffari, Munib Asim, S. Ali, P.Knoll, W. Lang, P.

Granitzer, H. Krenn, Phase separation and stability in Sm0.50Sr0.50MnO3: Effects of Cation Dopants, Jr.

of Phys. & Cond. Mat. 20(2008) 075221 (12 pp). http://iopscience.iop.org/0953-8984/20/7/075221

Impact Factor: 2.332 (2010), Publisher: Inst. of Physics, UK

19

95. Saadat A. Siddiqi, R. Siddiqi, S. Ali, Effect of Gamma Irradiations on YBa2Cu3O7-δHigh Temperature

Superconductors, Modern Physics Letters B, 22(27) (2008) 2699-2707.

www.worldscientific.com/doi/pdf/10.1142/S0217984908017217

Impact Factor: 0.512 (2009) Publisher: World Scientific Publishing

96. S. A. Yousaf and S. Ali ,The effect of Fluorine doping on optoelectronics properties of Tin-dioxide

(F: SnO2) Thin Films, Jr. of Natural Sciences & Math., 48 (1-2) ( 2008) 43-50.

97. M.Z. Iqbal, S. Ali, M.A. Mirza, Effect of particle size on the structural and Transport properties of

La0.67Ca 0.33MnO3 nanoparticles. Jr. of Natural Sciences & Math. 48(1-2) (2008) 51-63.

98. Syeda Amber Yousaf and Salamat Ali, Why Nanoscience and Nanotechnology? What is there for us?

J. of Faculty of Engg. & Tech., 2007-2008, pages, 11-20

99. S. Ali, S.A. Siddiqi, M.A.Mirza, G. Fritz, Controlled Size Synthesis and Thermal Properties of Mono-

Dispersed Metal Oxide Nano-Particles, Abstract No. 1P-435, accepted for Poster Presentation at

ChinaNANO-2007 held from June 04-06 2007 in Beijing, China.

100. S. Ali et al, Physical Properties of Rare Earth CMR Manganites. Paper Presented at 21st

Workshop/Conference, on Novel Materials and Superconductors, February 11 – 18, 2006,

Universitätssportheim Planneralm, Austria.

101. S. Ali, S.A. Siddiqi, M.A.Mirza, G. Fritz, Effect of Heat Treatments on the size of Metal Oxide Nano-

Particles, Abstract accepted for Oral Presentation at CIIT-COMSTECH International Mini Symposium

on Nano-Science and Technology, Islam Abad, Nov. 02-03, 2006.

102. M. N. Ishaq, S.T.A Shah, S. Ali, To Study the correlation between microstructure and mechanical

properties of Al-Mg-Cr alloy after work hardening, Jr. of Natural Sciences & Math. 46(1-2) (2006)

39-46.

103. K. M. Bhutta, S. Ali, S. A. Siddiqi, Gamma Irradiation Effect on YBCO and (Bi, Pb)SCCO High

Temperature Superconductors, Jr. of Natural Sciences & Math. 46(1-2) (2006) 33-38.

104. K. Shahzad, S. Ali, R. Ahmad, Effect of Plasma Nitriding on different properties of HTSC, Proceeding

10th National Symposium, 2005.

20

105. H. Gul, M.A. Rehman, S. Ali, A. Maqsood, Design, Construction and Testing of Low Cost AC

Susceptometer, Jr. of Natural Sciences & Math. 44(1) (2004)17-25.

106. S. Ali, D.P.Hampshire, Calorimetric Analysis of NbTi Superconductors.… Jr. of Natural Sciences &

Math. 43(2) (2003) 41-50.

107. S. Ali and D.P. Hampshire, Specific Heat Measurementson HIPed and unHIPed PbMo6S8

Superconductors...... Jr. of Natural Sciences & Math. 42(2) (2002) 119-132.

108. S. Ali, and D.P. Hampshire. The Design and Operation of a Probe.... Jr. of Natural Sciences & Math.

41(2) (2001) 187-198.

109. S. Ali, and D.P. Hampshire, The Probe Development for Calorimetric … Science International (Lahore)

13(2) (2001) 125-128.

110. D.N. Zheng, S. Ali, H.A.Hamid, C.Eastell, M.Goringa, and D.P. Hampshire. The Critical Current of

Chevrel Phase Superconductor .. Physica C, 291(1997) 49-58, doi:10.1016/S0921-4534(97)01684-5

Impact Factor: 1.407 (2010) Publisher: Elsevier

111. H. D. Ramsbottom, S. Ali, and D. P. Hampshire. Response of a new Ceramic-Oxynitride (Cernox)

resistance temperature sensors in high magnetic fields. Cryogenics, 36(1996) 61-63. doi:10.1016/0011-

2275(96)80772-7

Impact Factor: 1.124(2010) Publisher: Elsevier

112. S. Ali, H. D. Ramsbottom, D. N. Zheng, D. P. Hampshire, Specific Heat of PMS & PGMS

Superconductors in High Magnetic Fields. Inst. Phys. Conf. Ser. No. 148 (1995) 583-586.

Impact Factor: 0.53(2003) Publisher: Institute of Physics (IOP)

113. A. Maqsood, S. Ali, M. Maqsood, I. Haq, M. Khaliq, Role of Pb Substitution..... Jr. Mat. Sci. 27 (1992)

2363-2366.

Impact Factor: 1.859(2010) Publisher: Springer

114. A. Maqsood, N.M.Bhatti, S. Ali, &I.Haq. “Preparation and Characterisation of Bi-based High Tc

Superconductors” Material Research Bulletin, 25(1990) 779-784.

Impact Factor: 2.145(2010) Publisher: Elsevier 80.108 (11/5/18)

115. S. Ali, Specific heat measurements using the A.C. technique on the chevrel phase superconductor Pb(1-

x) Gd(x)Mo(6)S(8) in high magnetic fields. (Ph.D. Thesis) 1996. University of Durham, U.K.

http://etheses.dur.ac.uk/5284/.

21

Titles of Thesis and Names of Students Graduated using the Research

Facilities of Material Science/ Nanotechnology/Solar Cell Research Labs.

of Dept. of Physics, G.C. Univ., Lahore under the Supervision of Prof. Dr.

Salamat Ali.

Ph.D Thesis Completed:

1. Fullerene Replacement in Organic Solar Cells for Device Stabilization, M. Ikram,

Session, 2011-15.

2. Influence of Metal oxides nanoparticles in Brain Ischemia/ Cerebral Vascular Accidents,

Alvina Rafique Butt, Session 2009-13.

3. Organic-Inorganic Hybrid Solar Cells based on conducting Polymers and Metal

Oxides/Sulfides Nanoparticles by S. Amber Yousaf, Session 2010-14.

4. Synthesis and exploration of Nano Gas sensors based on Metal Oxide Thin Films, Tahira

Shuja, Session, 2009-13.

5. Fabrication of Nanostructured materials of Metal sulfides/oxides and their

Characterizations, by M. Nafees, session 2009-13.

6. Synthesis of various Nanometals Oxides and Comparative Analysis of their water

soluble anticancer drug diffusion parameters, by Khalid Rashid, Session 2009-13.

7. Synthesis and Characterization of Nanomaterials for Spintronic Devices and Dye

degradation Applications, by Asma Rafiq, Session 2015-18.

M.Phil Thesis (Completed)

1. EFFECT OF GAMMA IRRADIATIONS ON YBCO AND (Bi,Pb)SCCO HIGH TEMPERATURE

SUPERCONDUCTORS (By Khalid Mahmood Bhutta, Session 2000-02).

2. DESIGNING AND OPERATION OF SPECIFIC HEAT PROBE USING HEAT PULSE METHOD.

(By Ghazanfar Ali, Session 2000-02).

3. DESIGNING AND OPERATION OF SPECIFIC HEAT PROBE USING THERMAL RELAXATION

TECHNIQUE. (By Amjad Ali Rana, Session 2001-03).

4. TO STUDY THE CORELATION BETWEEN MICROSTRUCTURE AND MECHANICAL

PROPERTIES OF Al-Mg-Cr ALLOY AFTER WORK HARDENING (By Nadeem Ishaq, Session

2001-03).

5. FABRICATION AND CHARACTERIZATION OF RARE EARTH ( RE) HIGH TEMPRATURE

SUPER CONDUCTORS_(Dy, Y, and Yb, Series). Rabia Siddique, a student of Centre of Solid State

Physics of Punjab University, New Campus, Lahore. Session 2002-2004.

6. EFFECT OF COLD PLASMA ON DIFFERENT PROPERTIES OF HIGH TEMPERATURE

SUPERCONDUCTORS. (By Khurram Shahzad, Session 2002-04)

7. DESIGN, CONSTRUCTION AND TESTING OF LOW COST, HIGH TEMEATURE A.C.

SUSCEPTOMETER AND OBSERVATION OF TRANSITION TEMPERATURES OF Ni AND NiO,

(By Ali Abdullah, Session 2003-05)

22

8. DEVELOPMENT OF SPECIFIC HEAT PROBE USING A.C. TECHNIQUE BY COMPUTER

INTERFACING. (By Farhat Amin, Session 2003-05).

9. FABRICATION AND CHARACTERIZATION OF Ni-Cu SPINAL FERRITES (By Rashida Kaneez,

Session 2003-05).

10. Synthesis and Characterization of CMR Nano-particles, by Mueed A. Mirza, session 2004-

2006.

11. Fabrication and Characterization of CuO Nano-Particles, by Madiha Rehman, Session 2005-

2007.

12. Synthesis and Characterization of CMR (La0.67Ca 0.33 MnO3) Nano-particles, by Zaheer Iqbal,

session 2005-2007.

13. Fabrication and Characterization of NiO Nano-Particles, by Ammara Shabbir, Session 2005-

2007. (A student of CSSP, PU, Lahore).

14. Fabrication and Characterization of CdS Nano-particles, annealed by using different

radiations, by Aneeqa Sabah, session 2005-2007, (A student of CSSP, PU, Lahore).

15. Surface Engineering of Materials by Diamond Like Coating produced by PVD system

functioning at LARC Technology, by Khalid Rashid, Session 2006-08.

16. Synthesis & Characterization of CuS Nanomaterials of Different Morphologies, by M.

Nafees, session 2006-08.

17. Synthesis and Characterization of Carbon Nano Tubes. Waseem Hassan, Session 2006-08

18. Fabrication and Characterization of doped ZnO Semiconductors, Ihsan Shafique, Session

2006-08.

19. Preparation and Characterization of Nd0.7Sr0.3MnO3 Nanoparticles, Qasim Ali, Session 2006-

08.

20. Synthesis and Characterization of Transparent Conducting Oxides (TCO) Thin-films for Solar

Cell Applications, Syda Amber Yousaf, Session-2007-09.

21. Structural and Optical analysis of CdSe thin film prepared by Thermal Evaporation Method,

Shaista Rafique, Session, 2008-10

22. Synthesis and Characterization of Aluminum doped ZnO nanoparticles, Waseem Liaqat,

Session, 2008-10.

23. Synthesis and Characterization of Amoxicillin Nano-Structure Materials, Salma Zafar,

Session, 2008-10

24. Synthesis and Characterization of doped Quantum Dots of CdS, M. Ismail, Session, 2008-10.

25. Synthesis and Characterization of functionalized Silica Nanoparticle, M. Afzal, Session,

2008-10.

23

26. Synthesis and Characterization of doped ZnS nanoparticles, Aisha Aqeel, Session, 2008-10.

27. Effect of Solvents and Ammonia solution on different properties of SnO2 Nanoparticles

synthesized by sol-gel method, Tahseen Majeed, Session 2009-11.

28. Synthesis and Characterization of MnO2 Nano-Materials, Adil Mubeen, Session 2009-11.

29. Fabrication and characterization of Ciprofloxacin loaded Nanoparticles, Shaista Kanwal,

Session 2009-11.

30. Synthesis and characterization of Manganese/Cobalt ferrite nanoparticles for Magnetic

Resonance Imaging (MRI) applications, Amir Raza, Session 2009-11.

31. Fabrication and Exploitation of Al2O3/ZrO3 Nanostructures for Biosensors, Muhammad Faisal

Waseem, Session 2009-11.

32. Fabrication and Characterizations of Lead Sulphide Nanostructures of different

Morphologies, Mawara Taqi, Session, 2009-11.

33. Fabrication and Characterization of TiO2 Nanoparticles and its Thin Films for Solar Cell, by

Attiya Zareen, Session 2010-12.

34. Fabrication and Characterization of TiO2 Nanoparticles doped with Carbon, Nitrogen and

Sulphur. By Muhammad Irfan, Session 2010-12.

35. Hydrothermal Synthesis and Characterization of ZnO nanostructure materials, by Sana Shahid,

Session 2010-12.

36. Effect of Nickel doping on SnO2 nanoparticles synthesized by sol-gel method, by Tayyaba

Nazir, Session 2010-12.

37. To study the effect of Dye on different properties of TiO2 for Dye-Sensitized Solar Cell by

Mahnoor Alam, Session 2011-13.

38. Fabrication and Characterization of Hybrid Solar Cells based on Polymer/Metal Oxide Nano-

crystals, by Shairi Anjum, Session 2011-13.

39. Synthesis and Characterization of Bismuth Ferrite (BiFeO3) Nanoparticles using Sol-Gel

Technique, by S. Mudassar Muzaffar, Session 2011-13.

40. Synthesis and Characterization of Soft Ferrite Nanoparticles using Polyol Route, by Sidra

Younas, Session 2011-13.

41. Synthesis of CdSe Nanoparticles By Solvo-thermal Route, Structural, Optical and

Spectroscopic Properties by Ghulam Mustafa, Session 2011-13.

42. Fabrication and Characterization of Copper Phthalocyanine (CuPc) based Organic Solar Cells,

Nitasha Iftikhar, Session 2011-13.

43. "Synthesis and Characterization of Waterborne Polyurethane Coatings from Water-dispersible

Aliphatic Polyisocyanate" by Muhammad Abid, Session 2012-14, A student of Punjab

University, Lahore.

44. Fabrication and characterization of CuO-ZnO Solar Cell using Spin Coating technique by

Khizer Iqbal, Session 2012-14.

45. Characterization of Cu doped CdS Nanoparticles Synthesized by Wet Chemical Precipitation

Method by Werda Tussalaam, Session 2012-14.

46. Synthesis & Characterization of Barite (BaSO4) nanoparticles using micro emulsion route by

Masuma Moosa, Session 2012-14.

24

47. Synthesis & Characterization of NiCuZn Ferrite Nanoparticles by Sol-gel combustion method

by Aysha Masood, Session 2012-14.

48. Shape controlled synthesis of Nickel Sulfide Nanomaterials, Muhammad Usman Yousaf,

Session 2013-15.

49. Doping effect of Ni on TiO2 nanostructures using chemical route, Maria Manzoor, Session

2014-16.

50. Structural and Optical studies of Fe-doped TiO2 nanoparticles using Chemical Route, by

Rabeea Zahid, Session 2014-16.

51. Synthesis and Characterization of Cobalt-doped TiO2Nanostructures, Muhammad Asif Wazir,

Session 2014-16.

52. Synthesis and Characterization of Cobalt-doped Zinc Oxide Nanostructure using Sol-gel

Method, Muhammad Ali, Session 2014-16.

53. Synthesis and Characterization of Ni doped ZnO Nanoparticles by Chemical Route, by Saira

Sharif, Session 2014-16.

54. Band gap tuning of Anatase Titania (TiO2) using Ni and Co as doping metals, by Aroosa

Saleem, Session 2015-17.

55. Comparative Study of Anticancer Drug Loading Efficiency of ZnO and Graphene Oxide-ZnO

Nanomaterials, by Hassan Afzal, Session 2016-18.

56. Effect of Cr doping on ZnS Quantum Dots, by Abrar Asghar, Session 2016-18.

57. Investigation of Fe, Ni, Co, doping to CdS Quantum Dots, by Muhammad Junaid, Session

2016-18.

58. Synthesis and Characterization of Co and Mn based Ferrites, by Abdul Wahab, Session 2016-

18.

59. Enhancement in Photocatalytic Activity of TiO2 by doping Graphene Oxide, by Muhammad

Aqeel, Session 2016-18.

60. Synthesis and Characterization of ZnS/TiO2 Nanocomposites Using Sol-Gel Process, by

Umair Sattar, Session 2016-18.

61. Enhanced photocatalytic properties of GO doped with CuO nanoparticles, by Mujahid Abbas,

CMS No. 400915, Session, 2016-2018 (Riphah Univ.). 62. Improved Visible-Light Photocatalytic Activity of Graphene Oxide (GO) by Doping NiO

Nanoparticles, by Mian Muhammad Ali Sikander, CMS No. 401023, Session, 2016-2018

(Riphah Univ.).

63. Identification and purification of waste water constituents of leather industry using

electrocoagulation method, by Zia-ur-Rehman, CMS No. 401843, Session, 2017-2019 (Riphah

Univ.).

64. Characterization of Zr doped TiO2 Nanocrystals, synthesized using Sol-gel method by

Muhammad Tayyab Hussain, CMS No. 401840, Session, 2017-2019 (Riphah Univ.).

65. Enhancement in photo catalytic activity of Zr-doped TiO2 nanocomposites by Muhammad Altaf,

CMS No. 400381, Session, 2015-2017 (Riphah Univ.).

66. Investigating the Photocatalytic effect of Cu doped Two-dimensional Graphene Oxide (GO)

by Sarfraz Ali, CMS # 402422), Session Fall 2018-19

67. Drug delivery response of Ag doped MoS2 Nanomaterial, M. Imran khan CMS# 402472,

Session Fall 2018-19

68. Exploring the effect of Cu doping on 2-D BN3 Nanostructure materials. Ibrar Hussain CMS#

402233, Session Fall 2018-19

69. Synthesis and Characterization of Ag doped Graphene Oxide (GO). Tallot bin Saeed, CMS #

403087, Session Fall 2018-19

70. Band gap tuning of ultrathin MoS2 Nanomaterial’s. (Co-doping), Ali Raza, CMS # 402250,

Session Fall 2018-19 .

71. Antimicrobial Activity and Catalytic Response of Synthesized Bi doped MoS2 Nanosheets by

25

Usman Qamar, Session Spring 2018-19

72. Hydrothermal Synthesis and Catalytic Potential Response of Co doped BN Nanostructures.,

by Jahan Zeb Hassan, Session Spring 2018-19

73. Insight on catalytic applications of Zr doped MoS2 Nano sheets, by Rabia Tabassum, Session

Spring 2018-19

74. Antimicrobial study of Zr doped exfoliated 2-D Boron Nitride against MRSA Bacteria by

Iffat Jahan Siddiqui, Session Spring 2018-19.

75. Industrial waste-water treatment using Cu-doped TiO2 nanoparticles under visible radiation

by Ehtisham Umar, Session Spring 2018-19

76. Synthesis and Characterization of Bi - doped BN Nano-structures by Wakeel Ahmad, Session

Spring 2018-19.

M.Phil Thesis in Progress:

77. Synthesis of Efficient Mg-doped CNC-ZnO served as Nano-Photocatalyst by Abeera

Mahmood Session Fall 2019-21.

78. Cellulose-graphene oxide doped in TiO2 nanomaterials for the treatment of industrial waste-

water by Fahad Ahmad Rashid, Session Fall 2019-21.

79. Synthesis of ZnO-Cellulose doped MoS2 to enhance the organic dye degradation, by Iqra

Fazal, Session Fall 2019-21.

80. Enhanced industrial dye degradation using Ag doped Cellulose:CuO Nanomaterials, by Izzan

Hafeez, Session Fall 2019-21.

81. Study of chitosan-doped strontium oxide nano-composite to remove methylene blue and

ciprofloxacin from waste water, by Kashaf-ul-Ain, Session Fall 2019-21.

82. Ag-doped cellulose-cerium oxide quantum dots to enhance as catalytic application for

treatment of industrial and Hospital wasted water, by Shaukat Hayat, Session Fall 2019-21.

83. Enhanced dye-degradation using Cu-doped-cellulose NiO nanostructures, by Zareen Bashir,

Session Fall 2019-21.

84.

M.Sc Dissertations:

1. FABRICATION AND CHARACTERISATION OF HIGH TEMPERATURE SUPERCONDUCTORS

(BiSCCO-Series). (By Miss Yasmeen Ramzan. Session 1999-2001)

2. COMMISIONING A PROBE TO MEASURE THE ELECTRICAL RESISTIVITY OF MATERIALS.

(By Abdul Ghaffar, Session 1999-2001).

3. EFFECT OF IMPURITIES ON HIGH TEMPERATURE SUPERCONDUCTORS (BiSCCO-SERIES)

(By Miss Sidrat Khanum, Session 2000-02).

4. TO MEASURE THE ELECTRICAL RESISTIVITY OF DIFFERENT HIGH TEMPERATURE

SUPERCONDUCORS. (By Miss Aysha Batool, Session 2000-02).

5. EFFECT OF DIFFERENT IMPURITIES ON ELECTRICAL RESISTIVITY OF BISCCO. (By Junaid

26

Ali, Session 2001-2003.

6. FABRICATION AND STRUCTURAL CHARACTERISATIONS OF BISCCO. (By Saqib Jabbar,

Session 2002-04).

7. SYNTHESIS AND CHARACTERIZATION OF STRONTIUM OXIDE NANOPARTICLES by

Danish Naeem, Session 2009-13 [(B.Sc.(H)].

8. EFFECT OF VARYING pH ON THE SYNTHESIS AND CHARACTERIZATION OF

MANGANESE OXIDE NANOPARTICLES by M. Waqas Rabbani , Session 2009-13 [(B.Sc.(H)].

9. The effect of Temperature on Structural Properties of TiO2Nanomaterials synthesized using Sol-gel

Method by Saad Mahmood Rana, Session 2013-17.e