CURRICULUM VITAE - WordPress.com

1

PROFESSOR Ir. Dr. SHA’RI MOHD YUSOF Date of birth : 14 August 1961 Nationality: Malaysian Home Address : No 2 Jalan 9/10F, Seksyen 9, Bandar Baru Bangi 43650 Corresponding Address: same as above Contact : 019-7310725

e-mail [email protected], [email protected] [email protected] http://shariyusof.com ACADEMIC QUALIFICATION

Year 2000 Doctor of Philosophy (Manufacturing Engineering), University of Birmingham, United Kingdom

Year 1993 Master of Science (Engineering), Integrated Quality Systems, University of Birmingham, United Kingdom.

Year 1983 B.Sc. (Cum Laude) Industrial Engineering, University of Miami, Florida, United States of America

Certificate in Education, University of Miami, Florida, USA

ACADEMIC POSITION Professor (Contract – Since April 2020 – now)

Graduate School of Business Administration Meiji University, Tokyo Japan

Professor VK07 (Program Amal Bakti UTM) (29.10-2019 – 28.10.2020)

Professor (Quality Engineering and Management) (8.1.2008-13.8.2019) Razak School of Engineering and Advanced Technology Universiti Teknologi Malaysia.

Associate Professor (1.6.2000 – 7.1.2008) Dept.of Manufacturing & Industrial Engineering, Faculty of Mechanical Engineering,

Universiti Teknologi Malaysia. Lecturer (1.1.90-3.5.2000) Dept. of Production and Industrial Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia

CURRICULUM VITAE

mailto:[email protected]



http://shariyusof/

2

PROFESIONAL EXPERIENCE

Date Position 1/7/2018 – 13/8/2019

Dean, Razak Faculty Technology and Informatics, UTM KL – Leadin the integration of Advanced Inforamtics, Razak School, and Perdana School into this new faculty

1/3/2016 – 13/8/2019 1/3/2016 – 30/6/2018

UTM Senate Member Dean, Razak School of Engineering and Advanced Technology, UTM KL – Transformed the School through new university’s business model and financial sustainability with strengthening of research and new academic programmes in Sudan.

15/5/2012 – 14/5/14 Deputy Dean, School of Graduate Studies, UTM Kuala Lumpur – Spearheadad PhD Industry for Malaysian universities and strengthening PhD research and postgraduates’ courses in KL Campus.

1/6/10 – 14/5/2012 Director (Industry Unit), UTM Razak School of Engrg and Adv Technology – Lead in the transformation of BATC into Razak School business unit focus on income generation and quality culture.

1/11/2009 – 31/5/10 Deputy Executive Director BATC, UTM KL – Transforming of BATC Executive Programs and Adoption of quality assurance and new structures for industry based programmes, new collaboration with Meiji Double Master Programme

1/3/2009 – 31/5/10 Committee Member Postgraduate Studies (JAPSU) UTM

27/8/05 – 26/8/06 Head of Industrial Engineering Panel, Faculty of Mechanical Engineering – Developed the Master of Industrial Engineering until its implementation full time and part time.

1/1/01– 31/12/02 Head of Manufacturing and Industrial Engineering

Department, Faculty of Mechanical Engineering – Strengthening academic programs in the department

1/1994 to 4/1996 . Head of Industrial Engineering Panel, Dept. of Prod.&

Industrial Engineering, Faculty of Mechanical Engineering

9/1990 to 1/1992 Head of Metrology Lab, Dept. of Production & Industrial

Engineering, Faculty of Mechanical Engineering

1/1/1990 Assistant Lecturer “A’, Fakulti Kejuruteraan Jentera UTM

7/1989 – 12/1989 Deputy Manager, Purchased Parts Inspection Section

3

(Trim/Plastic & Rubber Parts) QC Dept., PROTON. 12/1987 – 6/ 1989

Assistant Manager, Purchased Parts Inspection Section (Rubber Group), Quality Control Dept., PROTON.

10/1984 – 11/ 1987

Assistant Manager, Body Assembling Section, Production Department, Perusahaan Otomobil Nasional (PROTON) Shah Alam.

9/1983 – 9/1984

Automobile Body Assembling and Engineering Training at Mitsubishi Motors Corporation, Mizushima, Japan

INTERNATIONAL LEVEL MEMBERSHIP

1. Senior Member American Society Quality (ASQ) USA

2. Member Quality Engineering Society (QES) Japan

3. Board Member Asia Pacific Industrial Engineering and Management Systems

Society (APIEMS) Since 2010

4. ASIA PROFESIONAL EDUCATION NETWORK (APEN) Japan-ASEAN Integration

Fund Committee – DIRECTOR (March 2016- July 2017)

AWARDS AND RECOGNITION 1. Bronze Medal Malaysia Technology Expo 2011, 17-19 Februari 2011, Kuala

Lumpur, “Lean Six Sigma Performance Improvement (LSSPI) Model for Automotive Industry, Organiser: Malaysian Association of Research Scientists (MARS): Nurul Fadly Habidin, Sha’ri Mohd Yusof, Zarak Shaifuddin Zamrah

2. Silver Medal, 22nd ITEX 2011, 20-22 May 2011, Kuala Lumpur for Invention of “Green Lean Six Sigma Scorecard System for Automotive Industry, Oranised by MOSTI and MINDS. Inventors: Nurul Fadly Habidin, Sha’ri Mohd Yusof, Zarak Shaifuddin Zamrah

3. Bronze Medal, Pecipta 2011 KL Convention Centre, Malaysia, KPT and UiTM, “Development of Strategic Green Lean Six Sigma Performance Measurement Systems for Automotive Industry. Inventors: Nurul Fadly Habidin, Sha’ri Mohd Yusof, Zarak Shaifuddin Zamrah

4. Silver Medal, Malaysia Technology Exhibition 2012, 16-18 February 2012, Kuala Lumpur, “Integrated Green LSS Blitz: Business Engineering Tool and Application. Organised by MARS. Inventors: Nurul Fadly Habidin, Sha’ri Mohd Yusof, Zarak Shaifuddin Zamrah

5. Gold Award, 2nd Accounting Research & Education Conference Accounting Innovation Exhibition, 2012 UTM Shah Alam, “Eco-green Lean Six Sigma Scorecard Tool for Automotive Industry”, Organised by Malaysian Accounting Association and UiTM: Nurul Fadly Habidin, Sha’ri Mohd Yusof, Zarak Shaifuddin Zamrah, Nurdiana Ibrahim

6. Bronze Award, INATEX 2012, 3-5 October 2012, “Sustainable Manufacturing Performance Evaluation Tool for Manufacturing Companies”, Sha’ri Mohd Yusof and

4

Elita Amrina 7. Anugerah Perkhidmatan Cemerlang Tahun 2013 Sekolah Pengajian Siswazah 8. Guest Professor at Meiji University (April 1st 2015-May 31 2015)- Part of Sabbatical

Research with Prof Katsuki Aoki 9. Anugerah Khidmat Cemerlang Universiti Teknologi Malaysia 2016

MEMBERSHIP

1. Member Institute of Engineers, Malaysia (MIEM) Since 1996

2. Registered Professional Engineer, Board of Engineers Malaysia (P.Eng.) Since 2000

3. Member Academy of Professors Malaysia Since 2019

. COMMITTEE NATIONAL LEVEL

1. Chairman, Technical Committee, Standards Development Brake Lining and

Suspension systems, SIRIM Bhd. (2001-2019)

2. Technical Committee (Audit) Quality Management Excellence Award 2011,

Malaysia Productivity Corporation (MPC)

3. MQA Panel Auditor for Industrial Engineering and Quality Engineering Programmes

since 2001 (Re-apppointment on 19 March 2018 – 3 years)

4. Auditor Panel, Johor Industry Quality Award (AKINJ) 2002, 2003, 2004

5. Evaluation Panel Industrial Engineering, National Accreditation Board (LAN)

6. Manufacturing Sector Consultative Committee Panel Member – since May 2013.

Malaysia Productivity Corporation

7. Juruaudit Projek Penyelidikan Kajian dan Pembangunan Sistem Penarafan

Bersepadu di Universiti dan Kolej Universiti (SETARA 2017), Kementerian

PengajianTinggi

8. Majlis Dekan Kejuruteraan Universiti Awam 2016-2019

ASSESSOR PANEL MQA PROGRAMS

Date Role of Assessor

Program

Feb 2010 Member Diploma in Industrial Engineering (MQA/A4030) Inti University College, Nilai, NS

Oktober 2010

Member Industrial Doctorate (MQA/PA0375) Asia-e University, Kuala Lumpur

May 2011

Chairman Ijazah Sarjana Muda Sains (Kepujian) Teknologi Industri (MQA/PA0940) UNISEL Kampus Bestari Jaya

Ogos 2012

Member Diploma Teknologi Kejuruteraan Jaminan Kualiti (MQA/PA2728) Pusat Latihan Teknologi Tinggi (ADTEC) Taiping

Ogos 2016

Chairman Bachelor of Mech Engineering Technology (Quality) with Honours (MQA/PA8864) DRB HICOM UNIV

5

Ogos 2016

Chairman Diploma of Engineering Technology in Quality) (MQA/PA8855) DRB HICOM UNIV

March 2018

Chairman Panel Penilai

Master of Science in Industry 4.0 (MQA/PA11209) Malaysia University of Science and Technology (MUST)

MEIJI UNIVERSITY 2020 Academic Year Subject Type

SPRING Semester May – July 2020 Programme _ MBA Global Business A Coursework Academic Presentation A (BA)ACD521J Coursework Production Management A (BA)MAN521J Coursework Global Business IA Research Class for Thesis

FALL Semester Sept – Jan 2021 Global Business B Coursework Production Management B (BA)MAN521J Coursework Global Business IB Research Class for Thesis

Master Project Supervision

No. Name

1. Zaini Ibrahim (DDP- Double Degree Program)

6

RESEARCH AND PUBLICATIONS

RESEARCH GRANTS

No Project Title Source Role/Members

Year

1. Quality Control Implementation: A Comparative study amongst the electronics industry in Johor

UPP Short Term Vot 61272 RM5000

Member 1991-1992

2. Application and Implementation of Industrial Engineering Methods in local manufacturing industry

UPP Short Term Vot 61595 RM 10000

Head of IE Research Group

1994 -1995

3. Development of a Framework for TQM Implementation in Small Businesses, University of Birmingham, School of Manufacturing and Mechanical Engineering.

JPA/UTM Scholarship Doctoral research

1996 -1999

4. TQM Advancement and Critical Factors for Implementation in Manufacturing SMEs

UPP Short Term Vot 71663 RM 15,700

Head of project

2000/2002

5. Development of Integrated Quality Engineering Approach for Malaysian Automotive SMEs.

IRPA RM8 Funding VOT 70468 Total Grant RM186,000

Head of project

2002 – 2004

6 Advanced Quality Improvement Techniques for Small and Medium Sized industries. Head of Project

IRPA Funding Vot 74067 Total Grant 139,600

Head of project

2002 – 2004

7. Benchmarking of Quality Engineering Practices Between Malaysian and Thailand Automotive Manufacturing Related Companies –

E-science Grant – Vot 79120 RM 106,000

Head Of Project

2007 – 2009

8. The Relationship Between Statistical Process Control Practices and Improvement in Quality Performance

MOHE FRGS Vot 78049 RM40,000

Head of Project with Jafri Mohd Rohani

2007 – 2009

9. An Integrated Manufacturing Performance Audit Tool for Malaysian Automotive Based Companies

MOHE FRGS Vot 78101 RM42,000

Assistant Head of Project

2007 – 2009

10. A Web Based Manufacturing Performance Evaluation Tool for Malaysian Automotive Industry

Tier 2 Research University Grant RM47000

Head of Project

1April 2011-31 March 2012

11 Sustaining the Implementation of Toyota Production system in Malaysian Automotive Industry

Razak School Grant Vot 4B18-K13000073084B18 RM43,500

Head of Project

1 Mac 2011-31Ogos 2012

12. Determining the Theoretical Model MOHE FRGS Head of 1/12/2014-

7

PUBLICATIONS

WEB OF SCIENCE INDEXED

1. Mat Dahan, S., & Yusof, S. M. (2020). Review and proposed eco-process innovation performance framework. International Journal of Sustainable Engineering, 13(2), 123-139. doi:10.1080/19397038.2019.1644387

2. Loh, K.L, Mohd Yusof, S., Lau, D.H.C., (2019) Blue ocean leadership in lean sustainability, International Journal of Lean Six Sigma, Vo. 10 No 1, March, pp.275-294

3. Salleh, A., Yusof, SM., Othman, N., (2019), An Importance-Performance Analysis of Sustainable Service Quality in Water and Sewerage Companies, INDUSTRIAL ENGINEERING AND MANAGEMENT SYSTEMS, 18 (1), pp. 89-103, DOI: 10.7232/iems.2019.18.1.089

4. Putri, N.T., Yusof, S.M., Hasan, A., Darma, H.S., (2017) A structural equation model for evaluating the relationship between total quality management and employees’ productivity, International Journal of Quality and Reliability Management, 34(8) pp. 1138-1151

5. Kafuku, J. M., Saman, M. Z. M., Yusof, S. M. & Mahmood, S, (2016) A holistic framework for evaluation and selection of remanufacturing operations: an approach, International Journal of Advanced Manufacturing Technology. 87(5-8), pp 1571-1584

for Lean Adoption Grant Vot K.30000.7840.4F678 RM 72,000

Project 30/11/16

13. Investigation Of Best Parameters To Obtain Optimal Performance Of Fully Functioned Crossflow Micro-Turbine To Be Used By Orang Asli In Remote Area

Tier 2 Research University Grant RM20,000

Member 1/10/2016-31/12/2017

14. Development Of Holistic Framework For Evaluation And Selection Of Remanufacturing Operations


Member 1/7/2016-30/6/2018

15. Enhancement Of Mahalanobis Taguchi System Based On Swarm Intelligence For Multivariate Pattern Recognition


Member

1/10/2016-30/9/2018

16. Improvement Of Changeover Times Through Integrating Of Smed Method With Qfd Techniques For Semiconductor Industry


Member 1/10/2016-30/9/2018

17. Theoretical Model Of Core Acquisitions For Durable Products Return


Member

1/8/2016- 31/7/2018

18. Mercerisation Treatment Enhancement of Kenaf Fiber/Polypropyelene Composites using Box-Behnken Design

MOHE FRGS R.K130000.7840.4F880 RM 88,000

Member 1/8/2016- 31/7/2018

8

6. Kafuku, J. M., Saman, M. Z. M., Yusof, S. M., Sharif, S. & Zakuan, N. (2015), Investment decision issues from remanufacturing system perspective: Literature review and further research, 2015 Procedia CIRP. Elsevier, Vol. 26, p. 589-594

7. Nurul Fadly Habidin Sha’ri Mohd Yusof Nursyazwani Mohd Fuzi, (2016),"Lean Six Sigma, strategic control systems, and organizational performance for automotive suppliers ", International Journal of Lean Six Sigma, Vol. 7 Iss 2 pp. 110 – 135

8. Habidin, N.F., Yusof, S.M., (2012), Relationship between lean six sigma, environmental management systems, and organizational performance in the Malaysian automotive industry, International Journal of Automotive Technology, 13(7), pp.1119-1125

9. Ahmad, M.F., Yusof, Sha’ri M., (2010), Comparative study of TQM practices between Japanese and non-Japanese electrical and electronics companies in Malaysia: Survey Results, Total Quality Management and Business Excellence, Vol. 21 Nos 1-2, pp. 11-20, Taylor and Francis, UK

10. Zakuan, N.M., Yusof, S.M., Laosirihongthong, T., Shaharoun, A.M., (2010), proposed relationship of TQM and organizational performance using structured equation modeling, Total Quality Management and Business Excellence, Vol. 21 Nos 1-2, pp. 185-204, Taylor and Francis, UK

11. Zadry, Hilma R., Yusof, Sha’ri M., (2006), “Total Quality Management (TQM) and Theory of Constraints (TOC) Implementation in Malaysian Automotive Suppliers: A Survey Result”, Total Quality Management and Business Excellence Journal, Taylor and Francis, UK

12. Quek, E.E., Yusof, Sha’ri M., (2003), A Survey of TQM practices in the Malaysian electrical and electronic industry, Total Quality Management Journal, Vol. 14 No. 1, pp. 63-77, Taylor and Francis, UK

13. Yusof, S.M., Aspinwall (2001), “Case Studies on the implementation of TQM in the UK automotive SMEs’, International Journal of Quality and Reliability Management, Vol. 18, No.6/7, pp. 722-761, MCB Press

14. Yusof, S.M., Aspinwall, E., (2000), “Critical success factors in small and medium enterprises: survey results”, Total Quality Management Journal, Vol. 11, Nos. 4/5 and 6, pp. S448-S462, Taylor and Francis

15. Yusof, S.M., Aspinwall, E. (2000), “Total quality management implementation frameworks: comparison and review”, Total Quality Management Journal, Vol. 11 No. 3, pp. 281-294, Taylor & Francis.

16. Yusof, S.M., Aspinwall, E., (2000), “TQM Implementation issues: review and case Study”, Int. Journal of Operations and Production Management, Vol. 20 No. 6, pp. 634-655, MCB Press

17. Yusof, S.M., Aspinwall, E., (1999), “Critical success factors for total quality management implementation in small and medium enterprises”, Total Quality Management Journal, Vol. 10, Nos. 4 and 5, pp. S803-S809, Taylor and Francis

18. Yusof, S., “Quality System Assessment in an electrical contracting company based on BS.5750 “, International Journal of Quality and Reliability Management, Vol.12 No.8, 1995, pp.64-73, MCB Press.

SCOPUS INDEXED

1. Belhadi, A., Zkik, K., Cherrafi, A., Yusof, S. M., & El fezazi, S. (2019).

Understanding big data analytics for manufacturing processes: Insights from literature review and multiple case studies. Computers and Industrial Engineering, 137 doi:10.1016/j.cie.2019.106099

2. Shah, S. A. R., Jamaludin, K. R., Talib, H. H. A., & Yusof, S. M. (2019). Integrated quality environmental management implementation in food processing SMEs: A case study of a developing country. TQM Journal, 31(5), 740-757. doi:10.1108/TQM-11-2018-0166

9

3. Dahan, S. M., & Yusof, S. M. (2019). A simulation-based approach to assess eco-process innovation performance. Paper presented at the IOP Conference Series: Materials Science and Engineering,598(1) doi:10.1088/1757-899X/598/1/012122 Retrieved from www.scopus.com

4. Rosman, R. B., & Yusof, S. M. (2019). An improved malaysian automotive industry resin supply chain framework. Paper presented at the Proceedings of the International Conference on Industrial Engineering and Operations Management, , 2019(MAR) 110-110. Retrieved from www.scopus.co

5. Salih, O. M., Yusof, S. M., & Dolah, R. (2019). Business excellence models implementation in saudi nonprofit organizations: Critical success factors and key barriers hindering adaptation. Paper presented at the Proceedings of the International Conference on Industrial Engineering and Operations Management, (November) 75-89. Retrieved from www.scopus.com

6. Kafuku, J. M., Saman, M. Z. M., & Yusof, S. M. (2019). Application of fuzzy logic in selection of remanufacturing technology. Paper presented at the Procedia Manufacturing, , 33 192-199. doi: 10.1016/j.promfg.2019.04.023 Retrieved from www.scopus.com

7. Dahan, S. M., & Yusof, S. M. (2019). Eco-process innovation performance: Production waste investigation through discrete event simulation. Paper presented at the IOP Conference Series: Materials Science and Engineering, 697(1) doi:10.1088/1757-899X/697/1/012001

8. Belhadi, A., Sha’ri, Y. B. M., Touriki, F. E., & El Fezazi, S. (2018). Lean production in SMEs: Literature review and reflection on future challenges. Journal of Industrial and Production Engineering, 35(6), 368-382. doi:10.1080/21681015.2018.1508081

9. Putri, N.T., Hidayat, B., Yusof, S.M., Fatrias, D., Indrapriyatna, A.S., (2018) Reducing bag defects using six Sigma methodology: A case study in a cement industry, 2018 7th International Conference on Industrial Technology and Management, ICITM 2018 Volume 2018-January, 6 April 2018, Pages 11-16

10. Mahmud, M., Yusof, S.M., (2018), The influence of religiosity on safety behavior of workers: A Proposed Framework, Pertanika Journal of Social Sciences and Humanities,26(1) pp. 1-20

11. Salleh, A., Yusof, S.M., Othman, N., (2018), Using importance-performance analysis for water and sewerage companies’ services, Proceedings of the International Conference on Industrial Engineering and Operations Management 2018-March, pp. 2527-2528, Elsevier

12. Sudiro, S., Yusof, S.M., Revino, (2018), Influence of inventory and work in process adjustment time on production target achievement of D Minus 1 production scenario: A case study of hospital bed production, Proceedings of the International Conference on Industrial Engineering and Operations Management 2018-March, pp. 292-303

13. Mohd-Zainal, A., Sulaiman, S., Yusof, S.M., Goodyer, J., (2018), Continuous improvement behaviours in Malaysian manufacturing companies, Proceedings of the International Conference on Industrial Engineering and Operations Management, 2018-March, pp. 3029-3039

14. Ng, Seow Chian, A. Hamid, N. Aziaiti, Yusof, S.M., (2017), Factor Affecting Implementation of Green Manufacturing for Malaysian Automobile Manufacturers: A Literature Review from 2010 until 2015, The Social Science 12(7), 1293-1298, Medwell Journals

15. Ng Seow Chian, A. Hamid, N.A., Yusof, S.M. (2017), Green Manufacturing Performance Measure for Automobile Manufacturers, ICIMSA 2017 – 4th International Conference on Industrial Engineering, Management Science and Applications. Institute of Electrical and Electronics Engineers Inc.13-15 June 2017, DOI: 10.1109/ICIMSA.2017.7985589 ISBN: 978-1-5090-6335-2

16. Kafuku, JM, Saman, MZM, Yusof, SM, (2017) Current and Future Issues in Electronics and Automobiles Remanufacturing Operations, FTC 2016 –

http://www.scopus.com/

10

Proceedings of Future Technologies Conference, (FTC) Dec 06-07, 2016, San Francisco, pp. 415-421

17. Doulatabadi, M. & Yusof, S. M., (2016) Sustained quality award status in developing country: A study on the Dubai Quality Award recipients, ICIMSA 2016 - 3rd International Conference on Industrial Engineering, Management Science and Applications. Institute of Electrical and Electronics Engineers Inc.,

18. Sudiro, S., and Yusof, S.M., (2016), Measuring production floor performance using systematic approach: A case study of hospital beds production, Proceedings of the International Conference on Industrial Engineering and Operations Management, 8-10 March, pp 372-381

19. Sudiro, S., Yusof, S.M., Revino, (2016), Design simulation and information dashboard for manufacturing control using systematic approach: A case study of hospital beds production, Proceedings of the International Conference on Industrial Engineering and Operations Management, (IEOM) 8-10 March, pp 1886-1895

20. Yusof, S.M., Aoki, K, (2016) Proposed Sustained Lean Factors, Proceedings of the International Conference on Industrial Engineering and Operations Management (IEOM), Kuala Lumpur, Malaysia, March 8-10, pp 2407-2417

21. Nurul Fadly Habidin Sha’ri Mohd Yusof Nursyazwani Mohd Fuzi, (2016),"Lean Six Sigma, strategic control systems, and organizational performance for automotive suppliers ", International Journal of Lean Six Sigma, Vol. 7 Iss 2 pp. 110 – 135

22. Putri, N. T., Retha, F. & Yusof, S. M., Design of quality system documentation in hydrotiller production unit as improvement of quality management system in small and medium enterprise, ( 2016) International Journal of Productivity and Quality Management. 19,1, pp. 116-138

23. Ramasamy, Jeyanthi; Yusof, Sha’ri M. (2015), A literature Review of Subsea Asset Integrity Framework for Project Execution Phase, Procedia Manufacturing, Vol 4, 2015, pp. 79-88

24. Mansoorzadeh, S., Yusof, S.M., Mansoorzadeh, S., Zeynal, H., (2014), A comprehensive and practical framework for reliable scheduling in project management. Advanced Materials Research. 2014; 903:378-383.

25. Ahmad, M.F., Zakuan, N., Jusoh, A., Yusof, S. M., Takala, J., Arif, M.S.M., (2014), Comparative study of TQM practices between Japanese and non- Japanese companies: Proposed conceptual framework, Advanced Materials Research, 903, pp.371-377

26. Amhad, M.F., Zakuan, N., Jusoh, A., Yusof, S.M., Takala, J., (2014), Moderating Effect of ASEAN Free Trade Agreement between Total Quality Management and Business Performance, 2nd International Conference on Innovation, Management and Technology Research, Procedia Social and Behavioral Sciences, Vol 129, pp. 244—249, DOI: 10.1016/j.sbspro.2014.03.673

27. Doulatabadi, M., Yusof, S.M., (2014), Driving “Soft’ factors for sustaining quality excellence: Perceptions from quality managers, IEEE International Conference on Industrial Engineering and Engineering Management,7058750, pp. 808-812

28. Malik, M.N., Yusof, S.M., (2014), Human values for implementation of total quality management: Proposed conceptual framework of an automated tool, IEEE International Conference on Industrial Engineering and Engineering Management 2015-January 7058753, pp. 823-827

29. Nolia Harudin; Sha'ri Mohd Yusof, Speeding maintenance performance through time study Applied Mechanics and Materials. 2014; 607:860-863

30. Doulatabadi, M., Yusof, S.M., (2014), The “Soft’ obstacles to quality excellence practices: Evidence from the United Arab Emirates, IEEE International Conference on Industrial Engineering and Engineering Management 2015-January 6962704, pp. 1721-1725

31. Putri, N.T., Yusof, S.N., Irianto, D., (2014), The Delphi hierarchy process-based study of quality engineering in Malaysia and Indonesia automotive companies, TQM Journal, 26(6) pp. 566-576

https://pure.utm.my/en/persons/shari-mohd-yusof

https://pure.utm.my/en/publications/design-of-quality-system-documentation-in-hydrotiller-production-



https://pure.utm.my/en/persons/shari-mohd-yusof/publications/

https://pure.utm.my/en/persons/shari-mohd-yusof/publications/

http://scival-expert.utm.my/pubDetail.asp?t=pm&id=84896854812&n=Sha%27ri+Mohd+Yusof&u_id=1201&oe_id=1&o_id=32







11

32. Doulatabadi, M., Khalifah, Z., Yusof S.M., (2014), An analysis of key factors for quality practices in the UAE’s industry, Applied Mechanics and Materials, 600, pp. 253-257

33. Zakuan, N., Ariff, M.S.M., ALifiah, M.N., Yusof S.M., Saman, M.Z.M., (2014), Causal analysis of ISO/TS16949 efforts in automotive industry, IOP Conference Series: Materials Science and Engineering. 58(1) 012006

34. Habidin, N.F., Yusof, S.M., (2013), Critical success factors of lean Six Sigma for the Malaysian automotive industry, International Journal of Lean Six Sigma, 4 (1), pp. 60-82

35. Habidin, N.F., Yusof, S.M., (2012), Relationship between lean six sigma, environmental management systems, and organizational performance in the Malaysian automotive industry, International Journal of Automotive Technology, 13(7), pp.1119-1125

36. Mansoorzadeh, S., Yusof, S.M., Zeynal, H., Mansoorzadeh, S., A risk-based project schedule estimation method to improve project reliability, Advanced Science Letters, Volume 13, June 2012, pp. 813-816

37. Amrina, E., Yusof, S.M., Interpretive Structural Model of Key Performance Indicators for Sustainable Manufacturing Evaluation in Automotive Companies in Proceedings IEEE International Conference Industrial Engineering and Engineering Management IEEM 2012, pp.656-660

38. Amrina E., Yusof, S.M., (2011), Key Performance Indicators for Sustainable Manufacturing Evaluation in Automotive Companies, 2011 IEEE International Conference on Industrial Engineering and Engineering Mangement (IEEM), Book Series IEEM, pp. 1093-1097

39. Mansoorzadeh, S. , Yusof, S.M., Reliable project scheduling with combination of risk management and critical chain schedule, Proceedings - 2011 IEEE Student Conference on Research and Development, SCOReD 2011, 6148780, pg 442-447, Cyberjaya, 19 December 2011-20 December 2011

40. Muslimen, R., Yusof, S. M. Abidin, A. S. Z. (2011) Lean Manufacturing Implementation in Malaysian Automotive Components Manufacturer: a case study, Proceedings of the World Congress on Engineering 2011, WEC 2011, 1, pp. 772-776

41. Putri, N.T, Yusof, S. M. (2011) An Empirical Investigation of Quality Tools and Techniques Practices in Malaysia and Indonesia Automotive Industries IEEE International Conference of Quality and Reliability (ICQR 2011)14-17 Sept 2011 Bangkok, Thailand, 6031736, pp. 331-335

42. Amrina, E, Yusof, S.M., (2010), Manufacturing performance evaluation tool for Malaysian automotive small and medium-sized enterprises, International Journal of Business and Management Science, Volume 3, Issue 2, pg 195-213

43. Zakuan, N.M., Yusof, S.M., Laosirihongthong, T., Shaharoun, A.M., (2010), proposed relationship of TQM and organizational performance using structured equation modeling, Total Quality Management and Business Excellence, Vol. 21 Nos 1-2, pp. 185-204, Taylor and Francis, UK

44. Ahmad, M.F., Yusof, Sha’ri M., (2010), Comparative study of TQM practices between Japanese and non-Japanese electrical and electronics companies in Malaysia: Survey Results, Total Quality Management and Business Excellence, Vol. 21 Nos 1-2, pp. 11-20, Taylor and Francis, UK

45. Mohd Rohani, J., Yusof, S.M., Mohamad, I., (2009), The relationship between statistical process control critical success factors and performance: A structural equation modeling approach, IEEM 2009 - IEEE Conference on Industrial Engineering and Engineering Management, 5373033 pp. 1352-1356

46. Putri, Nilda Tri, and Yusof, S.M. (2008), Review Of Quality Engineering Tools And Techniques Practices In Malaysia’s And Indonesia’s Automotive Industries And An Agenda For Future Research, in Proceedings of the 4th IEEE International Conference on Management of Innovation and Technology, ICMIT, 21st September


http://www.scopus.com/authid/detail.url?authorId=49561426200&eid=2-s2.0-84863326384




http://www.scopus.com/source/sourceInfo.url?sourceId=19700181106&origin=recordpage

http://www.scopus.com/source/sourceInfo.url?sourceId=19700181106&origin=recordpage

http://www.scopus.com/authid/detail.url?origin=recordpage&authorId=49561426200&zone=relatedDocuments

http://www.scopus.com/record/display.url?origin=recordpage&zone=relatedDocuments&eid=2-s2.0-84857874324&noHighlight=false&sort=plf-f&src=s&sid=B356497A5358C618BC12861A88FCF8D4.aXczxbyuHHiXgaIW6Ho7g%3a90&sot=aut&sdt=a&sl=38&s=AU-ID%28%22Yusof%2c+Sha%27ri+Mohd%22+7003315057%29&relpos=0

http://www.scopus.com/record/display.url?origin=recordpage&zone=relatedDocuments&eid=2-s2.0-84857874324&noHighlight=false&sort=plf-f&src=s&sid=B356497A5358C618BC12861A88FCF8D4.aXczxbyuHHiXgaIW6Ho7g%3a90&sot=aut&sdt=a&sl=38&s=AU-ID%28%22Yusof%2c+Sha%27ri+Mohd%22+7003315057%29&relpos=0

12

– 24th September 2008, Bangkok, Thailand, pp 449-456 47. Zakuan, Norhayati M., Yusof, S.M., Laosirihongthong, T., (2008), Reflective Review

of Relationship between Total Quality Management and Organizational Performance, in Proceedings of the 4th IEEE International Conference on Management of Innovation and Technology (ICMIT), 21st September – 24th September 2008, Bangkok, Thailand, pp. 444-448

48. Ramly, Edly F., Ramly, E.S., Yusof, Sha’ri M., (2007) Effectiveness of Quality Management System Audit to Improve Quality Performance – A Conceptual framework, in Proceedings of The 5th International Conference on Quality and Reliability (ICQR 2007), Chiang Mai, Thailand, 5-7th November 2007, pp. 26-31

49. Md Deros, B., Yusof, S.M., (2006), A Benchmarking Implementation Framework for Automotive Manufacturing SMEs, Benchmarking: An International Journal, Vol. 13 No. 4, pp. 396-430, MCB Press, UK

50. Yusof, S.M., Aspinwall, E. (2000), “A Conceptual Framework for TQM Implementation for SMEs”, TQM Magazine, Vol. 12 No. 1, pp. 31-36, MCB Press.

NON-INDEXED JOURNAL

1. Mohd Zainal, A., Yusof, S.M., Goodyer, J., (2016), Continuous Improvement

Behaviours In New Zealand Manufacturing Companies Jurnal Mekanikal, 40 (June), pp.21-36

2. Salleh, A., Yusof, S.M., Othman, N., (2017), Measuring Sustainable Service Quality of Malaysian Water and Sewerage Companies: A Pilot Study, Journal of Business and Social Review In Emerging Economies, Vol 3(1), pp.1-11

3. Mohd Zainal, A., Yusof, S.M., Goodyer, J., (2016), Validity and Reliability Study of Learning Organisation In New Zealand Manufacturing Companies, Jurnal Mekanikal 39(2) pp 25-38, Penerbit UTM

4. Salleh, A., Yusof, S.M., Othman, N., (2016), Sustainable Service Quality Of Water

And Sewerage Companies, Journal of Business and Social Review In Emerging Economies, 1(1), pp.1-10

5. Ahmed, S.H., Yusof, S.M., (2016) Ranking Critical Success Factors For Sustaining

Total Quality Management In Engineering Sector In Sudan, International Journal of Applied Engineering Research 11(21) pp 10708-10715

6. Ahmed, S.H., Yusof, S.M., (2016) An Overview Of 5Ds Model For Continuous Improvement, International Journal of Interdisciplinary Research, 2(12) pp 402-406

7. A. Abdul Kadir, S. Sarip, N. H. Nik Mahmood, S. Mohd Yusof, M. Z. Hassan, M. Y. Md. Daud and S. Abdul Aziz (2015), A Review of Integrated Management System In The Offshore Oil And Gas Industry, Journal of Advanced Review on Scientific Research, 12(1) pp. 11-25

8. Awad, A. A., and Yusof, S.M., (2013) A Methodology for Integrating Web Based

FMEA and TRIZ, International Journal of Systematic Innovation (IJoSI). 2(2), pp33-45, National Tsing Hua Univ Taiwan

9. Nilda Tri Putri, Sha'ri Mohd Yusof, Dradjad Irianto (2011), Quality Engineering Implementation in Malaysian and Indonesian Automotive Industries - Delphic Hierarchy Process Results, Journal of The Institution of Engineers Malaysia, Vol. 72 (2), pp55-62, IEM

13

10. Zakuan, N., Yusof, S.M., Mat Saman, M.Z., Shaharoun, M.S., (2010), Confirmatory

Factor Analysis of TQM Practices in Malaysia and Thailand Automotive Industries, International Journal of Business and Management, Vol 5 No. 1, January, Canadian Center of Science and Education.

11. Tham, S.K., Yusof, S.M., (2009), Quality Improvement Using Taguchi Method in a

Manufacturing company, Jurnal Mekanikal, pp. 44-56, Faculty of Mechanical Engineering, UTM

12. Nilda, Tri Putri, Sha’ri Mohd Yusof, (2008), Critical Success Factors for Implementing Quality Engineering (QE) in Malaysian and Indonesian’s Automotive Industries: A Proposed Model, International Journal of Automotive Industry and Management, 2 (2), pp. 1-16, Korea Automotive Research Institute

13. Ahmad, Mohd Fauzi, Yusof Sha’ri, (2007), Comparative Study of Quality Practices

Between Japanese and Non-Japanese Base Electrical and Electronics Companies in Malaysia – A Survey, Jurnal Teknologi

14. Ing Yi, Lee, Yusof Sha’ri M., (2007), Product Quality Improvement Through Poka Yoke Technique, Jurnal Mekanikal (No .23) Jun, pp. 74-82

15. Chin W.K., Sha’ri M. Yusof, (2006), Line Balancing Improvement in the Welding Section of a Car Assembling Plant, Jurnal Teknologi, Penerbit UTM

16. Baba Md Deros, Sha’ri M. Yusof, Azhari Md Salleh, (2006), A Survey on Critical Factors and Problems in Implementing Benchmarking Towards Achieving Business Competitiveness in SMEs, Jurnal Kejuruteraan, Jld 18, UKM

17. Baba Md Deros, Sha’ri M. Yusof, Azhari Md Salleh, (2005), A review of benchmarking as a tool for continuous improvement, Journal of Quality Management and Analysis, UKM, Vol. 1 No.1, pp 75-86

18. Sekaran Gopal, Jafri Mohd Rohani, Sha’ri Mohd Yusof, Zailis Abu Bakar, (2005), Optimization of Solder Paste Printing Parameters Using Design of Experiments (DOE), Jurnal Teknologi, Vol. 42 (A) Jun 2005, UTM pp. 119-128

19. Ayu Bidiawati, Yusof, S.M., Nabi Baksh, M.S., (2004), Penjadualan Pre-emption Menggunakan Aturan Pelepasan Berprioriti Dalam Sistem Bergangguan, Jurnal Mekanikal, Bil 17, 48-55, Fakulti Kejuruteraan Mekanikal, UTM

CONFERENCE PROCEEDINGS 1. Sudiro, S., Yusof, S.M., Revino, (2017), Design Production Schedule and

Simulation Of D Minus 1 Production Scenario Using Heaviside Function And Classical Control Theory: A Case Study Of Hospital Beds Production, Proceedings of the 18th Asia Pacific Industrial Engineering And Management System Conference (APIEMS 2018), Dec 3- 6, Jogjakarta

2. Salleh, A., Yusof, S.M., Othman, N., (2017), Measuring Sustainable Service Quality (SUSSERV) of Malaysian Water and Sewerage Companies, Proceedings of the 18th Asia Pacific Industrial Engineering and Management System Conference (APIEMS 2018), Dec 3- 6, Jogjakarta

14

3. Muthumani, D., Yusof, S.M., (2017), Lean, Agile, And Leagile in Military Inventory Management, Proceedings of the 18th Asia Pacific Industrial Engineering and Management System Conference (APIEMS 2018), Dec 3- 6, Jogjakarta

4. Salleh, A., Yusof, S.M., Othman, N., (2017), Sustainable Service Quality (Susserv) Of Malaysian Water and Sewerage Companies Proceedings of The 7th Iwa-Aspire Conference 2017 & Water Malaysia Exhibition 2017, 11-14 Sep, KLCC

5. Dahan, S., Yusof, S.M., Taib, M.Y., (2017) Performance Measure Of Eco-Process Innovation:Insights From A Literature Review, MATEC Web Of Conferences 131, 04007 (2017) UTP-UMP Symposium On Energy Systems (SES 2017), 25 -27 Sep, UTP Tronoh

6. Sudiro, S., Yusof, S.M., (2017), Design Concept of Day Minus 1 Production Model Using Systems Modeling Language: A Case Study Of Hospital Beds Production, 7th International Conference On Industrial Engineering And Operations Management (IEOM) April 11-13, Rabat, Morocco

7. Doulatabadi, M., Yusof, S.M., (2015), Sustained Quality Award status in Developing Country: A Study on the Dubai Qaulity Award Recepients, Proceedings of the 17th Asia Pacific Industrial Engineering And Management Systems Conference (APIEMS 2016), Dec 7- Dec 12Taipei

8. Salleh, A. Yusof, S.M., (2016) Service Quality Of Water And Sewerage Companies, Proceedings of the 17th Asia Pacific Industrial Engineering And Management Systems Conference (APIEMS 2016), Dec 7- Dec 12Taipei

9. Doulatabadi, M., Yusof, S.M., (2015) , The Analytical Hierarchy Process Based Study for Sustained Quality Excellence Practices, Proceedings Of The 16th Asia Pacific Industrial Engineering & Management Systems Conference (APIEMS 2015)., 8 Dec – 12 Dec 2015, Ho Chi Minh, Vietnam

10. Susanto Sudiro and Sha'ri Mohd Yusof, (2015) Managing WIP buffer with combination of feeding materials scenario and conventional control theory of single type of hospital bed production, Proceedings of 3rd International Conference on Industrial Engineering and Service Science (IESS), Yogyakarta, Indonesia, Sept 1-2, 2015

11. Hamzah, H.S., Yusof, S.M., Saman, M.Z.M., Dolah, R., (2015), Using Enhanced Idef-Sim (ENIS) Technique To Model Sustainable Supply Chains (SSC) (PART II) 4th International Conference on Engineering Business Management (ICEBM), 22-23 August 2015, Hotel Maya, Kuala Lumpur

12. Hamzah, H.S., Yusof, S.M., Saman, M.Z.M., Dolah, R., (2015), Using Enhanced Idef-Sim (ENIS) Technique To Model Sustainable Supply Chains (SSC) (PART I) 4th International Conference on Engineering Business Management (ICEBM), 22-23 August 2015, Hotel Maya, Kuala Lumpur

13. Sakina Mohd Kushairi, Sha’ri Mohd Yusof, (2015), Quality Improvement of Lip Dent Defect at Roll Forming Production Line using Poka Yoke, 4th International Conference on Engineering Business Management (ICEBM), 22-23 August 2015, Hotel Maya, Kuala Lumpur

14. Jumanah Raihan Mohamad Johasrin, Sha’ri Mohd Yusof, (2015), Lean Improvement in Welding Shop, 4th International Conference on Engineering Business Management (ICEBM), 22-23 August 2015, Hotel Maya, Kuala Lumpur

15. Mehran Doulat, Sha’ri Mohd Yusof, (2014), Factors Affective for Sustaining Quality management Practices: Award Firms Perspectives, International Conference on Quality 2014 (ICQ’14) Tokyo, Japan, 20-22 Oct 2014

16. Sha’ri Mohd Yusof and Farhad Nejadi, Future Trends Of Quality Engineering And Quality Management Implementation And Practices In Malaysia, International Conference on Quality 2014 (ICQ’14) Tokyo, Japan, 20-22 Oct 2014

17. Doulat Abadi Mehran & Yusof Sha'ri Mohd (2014) A Proposed Instrument for Evaluation of Quality Management Practices in United Arab Emirates Industries Proceedings of the Asia Pacific Industrial Engineering & Management Systems (APIEMS) Conference 2014, 13-15 October, Jeju Korea

15

18. Muhammad Noman Malik, Sha’ri Mohd Yusof, (2014), Tool to Identify and Assess Human Values for TQM Implementation: A Proposal, Proceedings of the Asia Pacific Industrial Engineering & Management Systems (APIEMS) Conference 2014, 13-15 October, Jeju Korea

19. M. N. Malik, M. Y. Sha’ri, Knowledge Management Framework of Human Values for Total Quality Management Implementation, 1st International Conference on Human Capital and Knowledge Management (HCKM), 3-4 December 2013, UTM KL

20. Ahmad, M.F., Zakuan, N., Jusoh, A., Yusof, S.M., Hisyamudin, M.N.N., Takala, J., The relationships between the extent of TQM Practices and the Importance on Business Performance: A Survey in Malaysia, International Conference on Advanced Manufacturing (ICAM) 12 – 13 December 2013 Bali, Indonesia

21. Doulatabadi, M., Yusof, S.M., Nejadi, F., (2013) The "Soft" Obstacles to Quality Excellence practices: Evidence from the United Arab Emirates Industries, Proceedings of IEEE International Conference of Industrial Engineering and Engineering Management 2013, 10-13 December, Bangkok

22. Khalifah, Z., Doulatabadi, M., Yusof, S.M., (2013), An Investigation into the Critical Success Factors of Quality Excellence Practices in United Arab Emirates Industries, International Materials, Industrial and Manufacturing Engineering Conference, 4-6 December, MIMEC 2013 Johor Bahru

23. Mesbah, N. F., Yusof, S. M., (2013) Systematic Way for Problem Identification of Car Braking System by Using TRIZ, Malaysia Japan Academic Scholar Conference 2013, Tokyo, 8 November, pp 12

24. Ahmad, M.F., Zakuan, N., Jusoh, A., Yusof, S.M., Takala, J., Moderator Effect of Asean Free Trade Agreement (AFTA) between TQM and Business Performance, International Conference on Innovation, Management and Technology Research (ICIMTR) 22-23 September 2013 UMK

25. Doulatabadi, M., Yusof, S.M., An Empirical Investigation on Common Barriers to Quality Excellence: Award, Firms Perspectives, Proceedings Second International Conference on Engineering Business Management (ICEBM) 2013, pp 236-245, 27-28 August, Kuala Lumpur, ISBN 978-967-11814-1-6

26. Ya'akub Arsad, Sha'ri Mohd Yusof and Noor Irza Mohd Zaki (2013), Simulation Tool for Analysing Cost on New Product Development, Proceedings Second International Conference on Engineering Business Management (ICEBM) 2013, pp196-204, 27-28 August, Kuala Lumpur, ISBN 978-967-11814-1-6

27. Awad, A.A., Yusof, S.M., Mesbah, N.F., (2013) Application of TRIZ to Solve Automotive Braking System Problems, Proceedings of Industrial Engineering and Service Science (IESS), 20 August 2013, Surabaya Indonesia

28. Doulatabadi, M., Yusof, S.M., An Empirical Investigation on Obstacles Limiting the Implementation of Quality Award Programs: Award Firms Perspectives, International Conference on Engineering, Technology and Management (ICETM 2013), 18-20 July 2013, Colombo, Sri Lanka

29. Ahmad, M.F., Zakuan, N., Jusoh, A., Yusof, S.M., Takala, J., Arif, M.S.M, Comparative Study of TQM practices between Japanese and non-Japanese Companies: Proposed Conceptual Framework, The 2nd International Conference on Mechanical Engineering Research, 1-3 July 2013, Kuantan Pahang

30. Noman, M., Yusof, S.M., Human Values Identification and Assessment for Implementation of Total Quality Management: A Research Preview, International Manufacturing Engineering Conference (IMEC) 2013, 1 – 3 July, Kuantan Pahang

31. Amrina, E., Yusof, S. M., (2013), An AHP Based-Model For Sustainable Manufacturing Performance Evaluation In Automotive Industry, Proceedings of the 12th International Symposium on the Analytic Hierarchy Process 24 -26 June 2013, Kuala Lumpur ISSN1556-8296

32. Rohani, J.M., Yusof, S.M., Mohamad, I., An Empirical Study of Critical Success Factors for Statistical Process Control Implementation: A Second-Order Factor

16

Analysis in the Proceedings IEEE International Conference Industrial Engineering and Engineering Management IEEM 2012, 10 December 2012 - 13 December 2012 Hong Kong

33. Mansoorzadeh, S., Yusof, S.M., Risk based Schedule Reliability in Construction Phases of EPS Projects in Power Industry in Proceedings Of The 13th Asia Pacific Industrial Engineering & Management Systems Conference (APIEMS 2012, V. Kachitvichyanukul, H.T. Luong, And R. Pitakaso Eds., 3 Dec – 5 Dec 2012, Phuket, Thailand

34. Amrina, E., Yusof, S.M., Drivers And Barriers To Sustainable Manufacturing Initiatives In Malaysian Automotive Companies, Proceedings Of The 13th Asia Pacific Industrial Engineering & Management Systems Conference (APIEMS) 2012,V. Kachitvichyanukul, H.T. Luong, And R. Pitakaso Eds., 3 Dec – 5 Dec 2012, Phuket, Thailand

35. Alharbi, Awadh S, Yusof S.M., A Review Of Performance Management In Research And Development (R&D) Firms Through Quality Management Implementation, in the Proceedings of the 6th Quality Conference In The Middle East, HBM e-University, 30 January - 2 February 2012, Dubai, United Arab Emirates

36. E. Amrina, S. M. Yusof, (2011), Key Performance Indicators for Sustainable Manufacturing Evaluation in Automotive Companies in IEEE International Conference on Industrial Eng and Eng Mgt IEEM2012 6-9 Dec 2011 Singapore

37. Fatemeh Harsej, Sha’ri Mohd Yusof, Iraj Nikookar (2011) Total Productive Maintenance: A Conceptual Framework for Manufacturing Performance Companies12th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2011) OCTOBER 14-17, 2011 Beijing, China

38. Nilda Tri Putri, Sha’ri Mohd. Yusof, Dradjad Irianto (2011), Self-Assessment of Quality Engineering Practices in Malaysia and Indonesia Automotive Related Companies,12th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2011) OCTOBER 14-17, 2011 Beijing, China

39. Ammar Ali Awad, Sha’ri Mohd. Yusof (2011) Design of Web -Based Failure Mode and Effects Analysis System by Integrating Triz Methods in an Automotive Firm, 12th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2011) OCTOBER 14-17, 2011 Beijing, China

40. Elita Amrina, Sha’ri Mohd. Yusof A Proposed Sustainable Manufacturing Performance Measures for Automotive Companies 12th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2011) OCTOBER 14-17, 2011 Beijing, China

41. F. Harsej, Sha’ri M. Yusof, I. Nikookar (2011), Critical Success Factors and Barriers of TPM Implementation in Developing Countries” 1st International Conference on Advanced Manufacturing (ICAM 2011), Paper ID: M129 TatiUC Terengganu

42. Awad, Ammar A., Yusof, S.M., (2010), Design of Web-Based Failure Mode and Effect Analysis (FMEA) System in an Automotive Manufacturing Firm, 11th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS) 2010, December 7-10, Melaka, Malaysia (PaperID554)

43. Putri, N.T., Yusof, S.M., (2010), Factors Affecting Effectiveness of Quality Engineering Implementation in Malaysian and Indonesian Automotive Industries - Delphic Hierarchy Process Methodology, World Engineering Congress WEC 2010, Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching, Sarawak,

44. Zakuan, N., Yusof, S. M., Shaharoun, A. M., D (2009), Determining the Effects of ISO/TS16949 Certification on TQM and Organizational Performance in Malaysian Automotive Industry: Moderator Variable Analysis, Asia Pacific Industrial Engineering and Management Systems Conference, APIEMS2009 Dec. 14-16, Kitakyushu, pp. 836-845

17

45. Putri, N.T., Yusof, S.M., (2009), Development Tool for Prioritizing and Measuring the Critical Success Factors of Quality Engineering Implementation (Case Study at Malaysian and Indonesian Automotive Industries), Asia Pacific Industrial Engineering and Management Systems Conference, APIEMS2009 Dec. 14-16, Kitakyushu, pp. 1010-1020

46. Amrina, E., Yusof, S.M., (2009), A Proposed Manufacturing Performance Measures for Small and Medium-sized Enterprises (SMEs), Asia Pacific Industrial Engineering and Management Systems Conference, APIEMS2009 Dec. 14-16, Kitakyushu, pp. 623-629

47. Zakuan, N. M., Yusof, S.M,, Shaharoun A.M., (2009), The Link between Total Quality Management and Organizational Performance in Malaysian Automotive Industry: The Mediating Role of ISO/TS16949 Efforts, Proceedings of the 2009 IEEE Industrial Engineering and Engineering Management Conference,, pp 439-443, IEEE

48. Putri, N.T., Yusof, S.M., (2009), Relationship between Total Quality Management and Quality Engineering – A Review and Agenda for Future Research International Conference on Quality, Productivity, and Performance Measurement (ICQPPM 2009), 16-18 Nov, Palm Garden Putrajaya, UKM

49. Amrina, E., Yusof, S.M., (2009), Manufacturing Performance Measurement in Malaysian automotive Small and Medium sized Enterprises: A Proposed Tool, International Conference on Quality, Productivity, and Performance Measurement (ICQPPM 2009), 16-18 Nov, Palm Garden Putrajaya, UKM

50. Putri, N.T., Yusof, S.M., (2009), Critical Success Factors for Implementing Quality Engineering Quality Engineering, Proceedings of the International Multiconference of Engineering and Computer Scientists 2009 (IMECS),(ICINDE) 18-20 March 2009, Kowloon, pp. 1736-1741

51. Elita Amrina, Sha'ri Mohd. Yusof (2008), "A Proposed Manufacturing Performance Measures for Malaysian Automotive Small and Medium-sized Enterprises (SMEs)", in Proceedings on International Graduate Conference on Engineering and Sciences (IGCES), December 23rd - 24th, 2008, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia.

52. Elita Amrina, Sha'ri Mohd. Yusof (2008), "A Review of Manufacturing Performance Measurement Framework for Small and Medium-sized Enterprises (SMEs) and An Agenda for Future Research", in Proceedings on the 9th Asia Pacific Industrial Engineering & Management Systems (APIEMS) Conference, December 3rd - 5th, 2008, Nusa Dua, Bali, Indonesia, pp. 1503-1510

53. Putri, Nilda Tri and Yusof, S.M. (2008), A proposed critical factor for effective implementation of quality engineering tools and techniques in Malaysian and Indonesian automotive industries, in Proceedings of International Graduate Conference on Engineering and Science (IGCES 2008), 23rd – 24th December 2008, UTM Skudai Campus, Johor Bahru, Malaysia.

54. Zakuan, N.M, Yusof, S.M., The Impact of ISO/TS16949 Certification in Malaysian Automotive Industry: A Preliminary Study, Proceedings of the ASEAN Federation of Engineering Organizations Conference(CAFEO26), 26th -29th November 2008, Thailand

55. Zakuan, Norhayati M., Yusof, S.M. (2008), Relationship between TQM and Organizational Performance: An Initial Results, International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008), 21st-23rd May, 2008, Johor Bahru

56. Zakuan, N.M, Yusof, S.M., Shamsudin, S., (2007), Implementation of Quality Management Practices in Malaysian Automotive Industries: A Review, in Proceedings of Regional Conference on Engineering Mathematics, Mechanics, Manufacturing and Architecture (EM3 ARC)–2007 Advanced Processes and Systems in Manufacturing (APSIM) 2007, eds. N. Muhammad et al, pp 105-116

18

57. Yusof, Sha’ri, M, Nabi Baksh, M.S., Hassan, Adnan, Sharif, Safian, (2007), Development of a Postgraduate Program in Industrial Engineering – Process and Lessons Learned, in Proceedings of 2nd Regional Conference of Engineering Education (RCEE 2007), Persada Johor, 3-5th December 2007

58. Ahmad, Mohd Fauzi, Yusof, Sha’ri M., (2007), Comparative Study of TQM Practices between Japanese and non-Japanese based Electrical and electronics Companies in Malaysia - A Survey, World Engineering Congress, Penang, 5-9 August 2007

59. Zakuan, Norhayati M., (2007), A Comparative Study of Quality Management Practices and Implementation for Automotive Industry Between Thailand and Malaysia, World Engineering Congress, Penang, 5-9 August 2007

60. Ng, Wan Tak, Yusof Sha’ri M., (2007), Statistical Quality Improvement in Thermoforming Process, World Engineering Congress, Penang, 5-9 August 2007

61. Ramly, Edly F., Yusof, Sha’ri M., Rohani, Jafri M., (2007) Manufacturing Audit to Improve Quality Performance – A Conceptual framework, World Engineering Congress, Penang, 5-9 August 2007

62. Zakuan, Norhayati M., Yusof, Sha’ri M., (2007), Comparative Study of Quality Practices and Implementation for Malaysian Automotive Manufacturer: A review, 2nd International Engineering Convention 10-14 March 2007, Jeddah, Saudi Arabia, p.023

63. Ng, Wan Tak, Yusof, Sha’ri M., (2007), Quality Improvement Using Six Sigma Methodology in Manufacturing Company, 2nd International Engineering Convention 2007, 10-14 March 2007, Jeddah, Saudi Arabia, p.068

64. Mohd Rohani, Jafri, Yusof, S.M., Mohamed, I., (2006), A Relationship Between Statistical Process Control Practices and Improving Quality Performance : A Theoretical Framework Model, Proceedings of International Conference on Mfg. Science and Technology (IcoMAst), 28-30 August 2006, MMU, Melaka ,pp. 557-560

65. Mohd Rohani, Jafri, Yusof, S.M., (2006), Using Structural Equation Modelling to Establish Critical Success Factors Interdependence in Statistical Process Control Implementations, 2nd International Conference on Six Sigma. 5-7 June 2006, Glasgow Caledonian University, Scotland

66. Baba Md. Deros, Sha’ri M. Yusof, Azhari Md Salleh, (2005), Critical Factors for Business Competitiveness in Malaysian Automotive Manufacturing SMEs, Tehran International Congress on Manufacturing Engineering (TICME2005), 12-13 December, Tehran

67. Jafri Mohd Rohani, Sha’ri Mohd Yusof, Wan Harun Wan Hamid, Critical success factors for SPC Implementation, International Advanced Technology Congress (IATC), Dec 6th- 8th 2005, Kuala Lumpur

68. Mazlan Awang, Sha’ri Mohd Yusof, Adnan Hassan, (2005), Application of Productivity Tools and Techniques in Malaysian Hospitals, International Advanced Technology Congress (IATC), Dec 6th- 8th 2005, Kuala Lumpur

69. Hilma Raimona Zadry, Sha’ri M. Yusof, Survey Results on Total Quality Management (TQM) and Theory of Constraints (TOC) Implementation in Malaysian Automotive Suppliers, in Proceedings of the 35th International Conference on Computers and Industrial Engineering 2005 (ICCIE2005), 19th-22nd June 2005, Istanbul, Turkey pp 2239-2244

70. Noviyarsi, Yusof, Sha’ri M., Quality Engineering Implementation in Malaysian Automotive Suppliers: A Survey Results, in Proceedings of the 35th International Conference on Computers and Industrial Engineering 2005 (ICCIE2005), 19th-22nd June 2005, Istanbul, Turkey pp 1445-1450

71. Baba Md Deros, Sha’ri Mohd Yusof, Azahari Md Salleh, A Pilot Study on a Conceptual Framework for Benchmarking Implementation in SMIs, in Proceedings of National Seminar on Advanced Processes and Systems in Manufacturing

19

(APSIM) 2005, 17th and 18th May 2005, Faculty of Engineering, Universiti Kebangsaan Malaysia, pp 201- 209

72. Baba Md Deros, Sha’ri M. Yusof, Azhari Md Salleh, (2004), A Review on Framework and Critical Success Factors for Benchmarking Practices, 3rd UNITEN International Business Management Conference (UIBMC 2004), 6 – 7 December, Kuantan

73. Ahmad Rais Mat Zin, Jafri Mohd Rohani, Sha’ri M. Yusof, A Survey of the Implementation of Quality Engineering Tools in Malaysian Manufacturing Industries, in Proceedings of the 3rd International Conference on Advanced Manufacturing Technology (ICAMT), 11th-13th May 2004, Kuala Lumpur, pp.535-541

74. Noviyarsi, Sha’ri M. Yusof, A Review of Quality Engineering Implementation in Malaysian Automotive Supplier, in Proceedings of the 3rd International Conference on Advanced Manufacturing Technology (ICAMT), 11th-13th May 2004, Kuala Lumpur, pp.587-592

75. Hilma Raimona Zadry, Sha’ri M. Yusof, A Review of Theory of Constraints Application for TQM Implementation, in Proceedings of the 3rd International Conference on Advanced Manufacturing Technology (ICAMT), 11th-13th May 2004, Kuala Lumpur, pp.580-586

76. Sim, H.K., Yusof, Sha’ri M., (2003), Development of TPM Implementation Plan in Switchgear & Engineering Company, International Conference on Mechanical Engineering, 26-27th December 2003, Dhaka, Bangladesh

77. Md Deros, B., Yusof, Sha’ri M., Salleh, Azahari M., (2003), A Comparative Study of Benchmarking Practices of Malaysian Companies with and without Quality Certification, International Conference on Mechanical Engineering, 26-27th December 2003, Dhaka, Bangladesh

78. Baba Md Deros, Sha’ri Mohd Yusof, Azahari Mohd Salleh, (2003), A Framework for Benchmarking Implementation in Manufacturing SMIs, Conference – The Public Institutions of Higher Learning (IPTA) R & D Exposition 2003, PWTC Kuala Lumpur 9th –10th October 2003, Organiser UPM

79. Baba Md Deros, Sha’ri M Yusof, Azahari Mohd Salleh, (2003), “Cadangan Kerangka Kerja Pelaksanaan Ukur Rujuk Untuk Industri Kecil dan Sederhana, dalam Prosiding Penyelidikan dan Pengembangan, Jabatan Kejuruteraan Mekanik dan Bahan, Fakulti Kejuruteraan, Universiti Kebangsaan Malaysia, ms 241-246

80. Baba Md. Deros, Sha’ri M Yusof, Azahari Mohd Salleh, (2003), “Kajian Literatur Untuk Kerangka Pelaksanaan Ukur Rujuk Bagi Industri Kecil dan Sederhana, dalam Prosiding Penyelidikan dan Pengembangan, Jabatan Kejuruteraan Mekanik dan Bahan, Fakulti Kejuruteraan, Universiti Kebangsaan Malaysia, ms 233-239

81. Baba Md. Deros, Sha’ri M Yusof, Azahari Mohd Salleh, (2003), “Kajian Mengenai Peranan, Definisi dan Ciri Industri Kecil dan Sederhana, dalam Prosiding Penyelidikan dan Pengembangan, Jabatan Kejuruteraan Mekanik dan Bahan, Fakulti Kejuruteraan, Universiti Kebangsaan Malaysia, ms 225-232

82. Nyioh, L.F, Muhammad Zameri M. Saman, Yusof, S.M., (2002), ‘Application of Quality Function Deployment (QFD) in Product Design and Development’, Proceedings 3rd National Ergonomics Conference, 12th-13th June, Johor Bahru, pp.159-171

83. Baba Md. Deros, Yusof, S.M, Azahari M.S., (2002), ‘A Review of Benchmarking Practices in Manufacturing Organizations’, 2nd World Engineering Congress- Mfg Engineering, Automation and Robotics, Kuching, Sarawak

84. Abdul Rahman Abd. Rahim, Sha’ri Mohd. Yusof, “Total Quality Management in a Small Industry: A Case Study”, Proceedings World Engineering Congress, 1999, Kuala Lumpur

85. Quek, E.E., Yusof, S.M., (2002), Comparison of TQM Implementation Practices in Malaysian Electrical and Electronics Industry, Proceedings 2nd World Engineering Congress, Kuching, Sarawak, July 2002

20

86. Yusof, Sha’ri M., Abdul Rahim, A.R., “Application and Implementation of IE Methods in Malaysian Industries “, Proceedings 1st. International Conference on Industrial Engineering Applications and Practices, Houston, 4th - 7th.Dec. 1996

87. Yusof, Sha’ri M., Abdul Rahim, A.R., “Meeting the needs of Industrial Engineering Education in Malaysia - The UTM Experience “, Proceedings Conference on ASEAN Federation Engineering Organisations, CAFEO, Ayer Keroh, November 1996

88. Yusof, Sha’ri M., Lai C.A., “Total Quality Management Implementation in Johor ‘s Electrical and Electronics Industry - A Survey”, Proceedings Pacific Conference on Manufacturing, Seoul, Korea, pp. 469-474, October 1996

89. Yusof, S., Rahim M.A., Eng S.B., “Development of a database system for a Quality Management Information System in a car manufacturing industry in Malaysia“, Proceedings International Conference on Productivity ‘91, Singapore, August 1991

BOOK CHAPTERS

1. Mehran Doulatabadi, Sha’ri Mohd Yusof, (2015), Ranking Measures for Sustaining Quality Excellence Practices: An Empirical Investigation, Lecture Notes in Electrical Engineering Vol. 349 2015, Industrial Engineering, Management Science and Applications 2015, Editors: Mitsuo Gen, Kuinam J. Kim, Xiaoxia Huang, Yabe Hiroshi, pp. 1009-1020

2. Rasli Muslimen, Sha’ri Mohd. Yusof, and Ana Sakura Zainal Abidin, (2013) A case study of lean manufacturing implementation approach in Malaysian automotive components manufacturer Electrical Engineering and Intelligent Systems, Springer Link

3. H. S. Hamzah, S. M. Yusof, K. R. Jamaludin, M. Z. Mat Saman, (2012) Reverse Supply Chain Framework Proposal For Malaysian Automotive Industry In

Sustainable Manufacturing - Shaping Global Value Creation - Editor Gunther Seliger , Springer, Berlin 978-3-642-27290-5 pp 275280

4. Rohani, J.M., Yusof, S.M., (2008), Deriving Success Factors and Quality and Firm Performance in Statistical Process Control Implementation: An Exploratory Factors Analysis (EFA) Approach Advances in Manufacturing And Industrial Engineering, Penerbit UTM, pp. 67-92

5. Zakuan, N., Yusof, S.M., (2008), TQM, ISO/TS16949 Certification and Organizational Performance in Malaysian Automotive Industry Advances In Manufacturing And Industrial Engineering, Penerbit UTM, pp. 49-66

6. Nilda, Tri Putri, Sahri M Yusof, (2008), Quality Engineering in Malaysian and Indonesia Automotive Related Industry- a Research Agenda, in Advances In Manufacturing And Industrial Engineering, Penerbit UTM, pp. 17-48

OTHER PUBLICATIONS

1. Yusof, Sha’ri, Quality in the First Person – A Necessity to Compete Globally, Quality Progress, Vol. 37 No. 5, May 2004, pp. 92-93

2. Total Safety Management versus Total Quality Management: A Creative Link via SPC Tools, National Institute of Occupational Safety and Health Bulletin, NIOSH April 2002

3. Final Report ‘TQM Advancement and Critical Factors for Implementation in manufacturing SMEs’, Short Term Research 2001-2003

4. Sha’ri Mohd Yusof, Ammar Ali, Mohd Rasid Othman, (2013), Air Asia's Strategies, The Ingineuer, Lembaga Jurutera Malaysia, KDN PP 11720/4/2013 pp 42-47

5. MS 2046:2008 Road Vehicles - Brake Linings Frictions Materials - Visual Inspection SIRIM Berhad

6. MS 2082:2008 Road vehicles - Braking systems - Temperature measuring methods SIRIM Berhad

21

7. MS 4928:2008 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.) (ISO 4928:2006, IDT) SIRIM Berhad

8. MS 6118:2008 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.) (ISO 6118: 2006, IDT) SIRIM Berhad

9. MS 4930:2008 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 °C max.) (ISO 4930:2006 IDT ) SIRIM Berhad

INTELLECTUAL PROPERTY FROM RESEARCH

No Title Type Owners/Authors Date

1. Manufacturing Performance Audit Software

Copyright Elita Amrina Sha’ri Mohd Yusof

4 Nov 2009

2 Model of ISO/TS16949 Efforts as Mediator

Copyright Norhayati Zakuan Sha’ri Mohd Yusof Muhammad Zameri Mat Saman

4 April 2012

3. Model of ISO/TS16949 Efforts as Moderator


4 April 2012

4. Survey Instrument on Total Quality Management Implementation


4 April 2012

5. Total Productive Maintenance on Manufacturing Performance, Predictor Model Based on Artificial Neural Network and Optimization (TPM-ANN Integrated Model Based on TPM Critical Success Factors)

Copyright Sha’ri Mohd Yusof Fatemeh Harsej

25 July 2012

6. 5D Medication System Copyright Sharef Eldin Hamid Sha’ri Mohd Yusof

2017

22

TEACHING Session Sem Code Course Credits

17/18 1 MRSA 2123 Quality Management and Reliability 3

17/18 1 ERSA 1113 Current Topics in Production and Operations Management

3


3


16/17 2 MRSE 1513 Operations Strategy and Management 3

16/17 2 ERSA 1243 Current Topics in Total Quality Management 3



3

16/17 1 MRSE 1523 Quality Management and Techniques 3

16/17 1 MRSE1513 Operations Strategy and Management 3



16/17 1 MKAB 2373 Pengurusan Kualiti Projek 3

15/16 2 MRSE 1513 Operations Strategy and Management 3

15/16 2 MDE 1513 Operations Strategy and Management 3


3



3

15/16 1 EDW 3243 Quality Management and Techniques 3

15/16 1 MRSE 1523 Quality Management and Techniques 3


15/16 1 EMS 2183 Quality Management and Problem Solving 3




13/14 3 MMN 2323 Quality Management 3

13/14 2 MDE 1523 Quality Management and Techniques 3




12/13 2 MMN 2153 Project Management 3


12/13 1 MMP 2643 Production and Operations Management 3



11/12 2 MMN 1113 Production and Operations Management 3


10/11 1 MAB 2643 Project Quality Management 3

10/11 1 SME 4832 Pengurusan Kejuruteraan dan Keselamatan 3


09/10 2 MMN 1113 Productions and Operations Management 3

08/09 1 MMN 1123 Advanced Quality Engineering 3

08/09 2 SMJ 4832 Pengurusan Kejuruteraan dan Keselamatan 3

TOTAL 129

Additional : MDE 1523 Quality Management and Tools / Double Master Meiji Univ (Part Time Meiji University Professor) July 2011, July 2012, June 2013, June 2014, Nov 2015, July 2017 = Additional 21 credits

23

POSTGRADUATE SUPERVISION DOCTOR OF PHILOSOPHY

No Name Role Title Time

1 Baba Md Deros

Main Supervisor

Development of a Benchmarking Implementation Framework for Small and Medium Sized Enterprise

Completed December 2004

2 Abd Rahman Abdul Rahim

Main Supervisor

New Product Development Framework for ETO production

Completed June 2006

3 Norhayati Zakwan

Main Supervisor

Comparative Study of Quality Tools Implementation and Practices in Automotive Industries

(Aug. 2006 – December 2009) Completed

4 Nilda Tri Putri

Main Supervisor

Benchmarking of Quality Practices Between Malaysian and Indonesian Automotive Related Companies

Completed (Dec 2007 – July 2011)

5 Zainal Fitri bin Zainal Abidi

Main Supervisor

Doctor of Engineering (EBM) Sound Quality Perception for Local Automotive Manufacturer

Completed (Jun 2004 – Feb 2012

6 Nurul Fadly Zabidin Main Supervisor

Lean Six Sigma and Strategic Control Framework

Completed September 2012

7 Elita Amrina

Main Supervisor

Sustainable Manufacturing Performance Tool for Automotive Companies

Completed (Dec 2009 - April 2013)

8. Vahideh Tabasi Loft Abadi Co-Supervise with Dr Kamariah Ismail (FPPSM)

Co-Super Entrepreneurial marketing : consumer expectations and satisfaction in case of Iran Khodro Company

Completed (June 2009-2013)

9 Fatima Harsej

Main Supervisor

Predictive Model for Total Productive maintenance Critical Success Factors on Manufacturing Performance in Automotive Industry

Completed (July 2008-Sep 2013)

10 Ammar Ali Awad Main Supervisor

Integration of Web-based Failure Mode and Effects Analysis with TRIZ Inventive Problem Solving Methods

Completed (Dec 2008-12 Feb 2014)

11 Shiva Mansoorzadeh

Main Supervisor

Risk based scheduling in engineering, procurement and construction projects in Iran power industry

Completed Sept 2014

12 Jafri Mohd Rohani Main Supervisor

Relationship between Statistical Process Control Success Factors and Organizational Performance

Completed (Jul2005 – 2014)

13 Muhammad Noman Malik Main Supervisor

Human Values Identification and Assessment Tool for TQM Implementation

Completed (Feb 2012-April 2015)

24

14 Mehran Daulotabi Main Supervisor

Self-Assessment Instrument for Sustaining Business Excellence in Quality Award Companies.

Completed (2008-2016)

15 Awadh Salim AlHarbi Main Supervisor

Performance Management Systems for Research and Development Activities in Saudi Arabia Oil and Gas Sector


16 Affandi Zainal Adibin Main Supervisor

Relationship between Learning Organization Dimensions, Problem Solving Behaviour and Continuous Improvement Bahaviour in Sustaining Lean Implementation

Completed (2014 -2017)

17 Jeyanthi Ramasamy

Main Supervisor

Subsea Asset Integrity Framework for Project Execution Stage

Completed April 2017

18 Halim Shah Hamzah

Co- Supervisor

Automotive Post Use Supply Chain Business Processes Feasibility Model


19 SharafEldin Hamed Ahmed Main Supervisor

Integrated Framework for Sustaining Total Quality Management in Sudan

2013 – Viva 23 March 2017

20 Susanto Sudiro (ISTN) Main Supervisor

Permodelan Perancangan dan Kawalan Kerja dalam Proses Multi Produk bagi Pengeluaran Katil Hospital

Feb 2014-7 September 2017

21 John Mbogo Kafuku Co-Super Remanufaturing Cost Framework

(Sep 2013- August 2017)

22 Mazlan Mahmud Main Supervisor

The Influence of Religiosity and Fatalism on Safety Behavior of Muslim Shipyard Workers in Malaysia

Feb 2012 – Viva April 2018

23 Abrari Saleh Main Supervisor

Sustainable Service Quality of Malaysian Water and Sewerage Companies

Sept 2014 – April 2018

24. Azah Abdul Kadir Co-super Design Of Project Integrated Quality And HSE Management System For ERCIC Oil And Gas Marine Contractors

Aug 2012

25. Loh Kok Liang Main Supervisor

Blue Ocean Leadership for Sustaining Lean Manufacturing in Malaysian Automotive Industry

Feb 2016- March 2019

26. Saad Aziz H AlOtaibi Main Supervisor

Impact of Service quality and Organisational Culture on Customer Satisfaction among university students at Umm Al-Qura University

Sep 2015 – Dec 2019

27. Daswir Main Supervisor

Hubungan Komitmen Pengurus Dengan Budaya dan Perilaku Keselamatan Kerja Loji Penapisan MInyak Riau

Feb 2014-July 2020

28. Rosdan Rosman Main Supervisor

Supplier Selection system Feb 2012 – Jan 2021

25

POSTGRADUATE-DOCTOR OF PHILOSOPHY Continued by colleaque

No.

Name Role

Title Timeline

1. Suziyana Mat Dahan Main Supervisor

An Instrument to Measure Eco-innovation Performance in Malaysian Electrical & Electronics Industry

Feb 2016

2. Ahmad Ashraf Mohd Ali Main Supervisor

Perception of Malaysian Towards Remanufacturing Products in Automotive Industry

Feb 2016

3. Amizi bin Noor Main Supervisor

Optimization Of Automated Guided Vehicle Maneuverability

Feb 2017

4. Nor Azlina Ahmad Zaini Main Supervisor

Development of Green Supplier Selection Model in Public Projects: An Integrated Fuzzy -AHP Approach

Feb 2017

5. Ng Seow Chian (co-supervise

Co-Super Green Supply Chain Penyelia Utama UTHM (Dr Noraziati Abdul Hamid – FPTP) 10 Apr 2016

MASTER BY RESEARCH (GRADUATED)

Noo

Name Role

Title Time

1. Ayu Bidiawati Main Penjadualan Pengeluaran Menggunakan Aturan Pelepasan Berprioriti Dalam Sistem Bergangguan (Production Scheduling Priority Rules in a Pre-emption System)

Completed February 2004

2. Noviyarsi Main Development of Quality Engineering Framework for Malaysian Automotive Suppliers


3. Hilma Raimona Zadry Main The evaluation of Total Quality Management in Malaysian Automotive Suppliers Using Theory of Constraints (TOC)


4. Mazlan bin Awang Main A Critical Study on Applications of Industrial Engineering Tools and Techniques in Malaysian Hospitals

(June 2003 – Sept 2006) – Completed

5. Mohd Fauzi Ahmad Main Comparative Study Of Quality Practices Between Local And Japanese Based Companies in Malaysia

(June 2004 – April 2009) Completed

26

6. Mohd Azril bin Amil Main Supplier performance assessment tool in automotive industry using multivariate analysis

(July 2006 – August 2009) Completed

7. Elita Amrina Main Manufacturing performance measurement tool for small and medium-sized enterprises

(Dec 2007 – August 2009) Completed

8. Nurul Fatiha Mesbah Main Inventive solution on braking system for passenger car using TRIZ method

(July 2012- Oct 2014 Completed)

27

ACADEMIC RECOGNITION AND LEADERSHIP KEYNOTE ADDRESS/INVITED SPEAKERS

1. 64th Inaugural Professorial Address, Quality Thinking : A Way of Life, 21st

January 2015, Dewan Jumaah Universiti Teknologi Malaysia, Kuala Lumpur

2. ‘Sustaining Lean Organizations … Learning from Toyota… again’, Keynote

Address International Conference on Industrial Engineering/ 3rd International

Conference on Ergonomics 19-20 August 2015, Kuala Lumpur. Organized by UM,

UKM, UPNM, UPM, HFEM, MySet

3. Sustainability Factors for Lean Management System, Invited Speaker for

International Conference on Management at Meiji 2015 – How to Join International

Academic Community? Meiji University Tokyo 2-3 November 2015

4. Sustaining Lean Organizations, Keynote Speaker in ErgoSym2015 and Lean Six

Sigma 2015, Organized by school of Manufacturing, Universiti Malaysia Perlis, 30-

1st December 2015

5. Visiting Professor Keynote Lecture “Lean and Sustainability” Fakultas Teknik,

Universitas Andalas, Padang, Indonesia, 9 May 2016

6. Speaker at Asia Profesional Education Network (APEN) –JAIF (Japan ASEAN

Integration Fund) Project Ci-HRD Wrap Up Conference, 13th May 2017, Bandung

Indonesia (see www.apen.asia)

7. Presenter at APEN JAIF Project Seminar – Dissemination of Project Outcomes in

Thailand, 1st June 2017, Thai-Nichi Institute of Technology, Bangkok. Supported

by JAIF Fund

8. 6th International Conference on Technology Management, Business and

Entrepreneurship 2017 (ICTMBE 2017), 24 August 2017. Keynote Speaker,

‘Sustaining Lean in Organizations for Survival’.

9. Keynote Speaker, 6th Annual Conference on Industrial and System Engineering

(ACISE) and ICRMIA, Industrial Engineering Dept. Universiti Diponegoro,

Semarang, 24 April 2019

10. Keynote Speaker, International Conference of Engineering Business Management

(ICEBM 2019), Hotel Royale Chulan, 3-4 August 2019

11. Keynote Speaker, 1st International Conference of Industrial Engineering

Technology Management and Knowledge Science (IETechs) 2019, Novotel Hotel,

29-30 September organized by UTHM

28

VISITING PROFESSOR 1. Faculty of Science and Technology, Universitas Islam Negeri Sultan Syarif Kasim

Riau (UINSUSKA), Pekan Baru Indonesia (11-11 September 2013)

2. Fakultas Teknik Universitas Andalas, Padang Sumatera, April 11-14, 2014

TECHNICAL COMMITTEE

1. International Advisory Committee, International Conference on Engineering & ICT

2010 (ICEI 2010) University Teknikal Malaysia Melaka,18-20 Feb Holiday Inn

Melaka

2. Technical Committee Chair, Asia Pacific Industrial Engineering and Management

Society Conference 2010, 7-10 December 2010, Melaka organized by APIEMS,

UM and KIIE

3. Program Committee International Conference on Industrial Engineering And

Service Science (IESS) 2011, Surakarta, Institut Teknologi Sepuluh Nopember,

Chair Budi Santosa

4. Committee Member, 1st International Conference on Robust Quality Engineering

(ICRQE 2013) 22-26 April 2013

5. Committee Member, 2nd International Conference on Engineering Business

Management, Hotel Istana , 27-28 Aug 2013

6. Panel Reviewer, 3rd International Conference on Engineering Business

Management (ICEBM 2014) 25-26 Aug 2014

7. International Conference On Industrial Engineering And Service Science (IESS)

2015, Institut Teknologi Sepuluh Nopember

PROGRAM EXAMINERS/BOARD OF STUDY 1. Universiti Teknikal Malaysia Melaka – Faculty of Manufacturing – Degree in

Manufacturing Engineering (Manufacturing Management, Faculty of Manufacturing

Engrg, 1 Mar 2009 - 31 August 2011

2. Malaysia Inst of Industrial Technology, (MITEC) UniKL Pasir Gudang – Bachelor of

Engineering Technology in Quality Engineering (Hons) (2009-2012)

3. Universiti Malaysia Sarawak – Board of Study Master in Mechanical Engineering –

Nov 2015

4. Universiti Tun Hussien Onn Malaysia, Parit Raja, Batu Pahat – Fakulti Pengurusan

29

Teknologi dan Perniagaan – Program Sarjana Muda Pengurusan Teknologi

(Pengeluaran dan Operasi) 1 Mei 2015 – 30 April 2017

5. Ahli Lembaga Penasihat Fakulti, Kejuruteraan dan Alam Bina, UKM Program

Kejuruteraan Mekanikal Jabatan Mekankik dan Bahan 1.1.2016-31.12 2019

6. Board of Study New Program Master of Science (Engineering Management),

Faculty of Engineering, Universiti Malaysia Sarawak (UniMAS) Kuching, 1 Februari

2017 – 31 Januari 2018

7. Board of Studies (BOS) UniKL MITEC, PAsir Gudang, Master in Quality Engineering

and Management ,8 Feb 2017

8. External Examiner Master of Engineering (Mechanical) Faculty of Engineering,

Universiti Malaysia Sarawak, 25-26 Jun 2019

JOURNAL PAPER REVIEW / EVALUATION

1. ‘A QFD Approach for distribution location’s model, International Journal of Quality and Reliability Management, MBC Press, UK, 2001 (Reviewed)

2. Meningkatkan Kualiti dan Produktiviti Produk (Billet) Melalui Teknik Kawalan Kualiti Berstatistik, JURNAL TEKNOLOGI Siri A, Penerbit UTM, 2001

3. Statistical Process Control (SPC) applied in Plastic Injection Moulded Lenses, JURNAL TEKNOLOGI Siri A, Penerbit UTM, 2001

4. Penggunaan Kaedah Ukur Rujuk Dalam Pemprosesan Seramik bagi Meningkatkan Kualiti dan Produktiviti, JURNAL TEKNOLOGI Siri A, Penerbit UTM, 2001

5. Kepuasan Pengguna Selepas Pengiktirafan ISO 9001: Kajian Kes Sebuah Fakulti di Universiti Teknologi Malaysia, JURNAL TEKNOLOGI Siri E, Penerbit UTM 2002

6. A Plastic Injection Molding Characterization using Experimental Design Technique: A Case Study, JURNAL TEKNOLOGI Siri A, Penerbit UTM, 2003

7. Creating and Delivering Customer Value Through Quality Function Deployment (QFD), JURNAL TEKNOLOGI Siri E, Penerbit UTM 2003

8. Production Planning for a Multi-Stage, Multi-Item Compatible Process Using Multiple ARC Network Model, JURNAL TEKNOLOGI Siri E, Penerbit UTM 2004

9. An Operational and Institutional Perspective on Total Quality Management, Journal of Production and Operations Management, Carnegie Mellon, USA, 2004

10. Development of a Model for Application of TQM in a Tobacco Manufacturing Company, ICAMT 2004, UIA and UTM

11. Efficient Cost Management Through Excellence Quality Management Practices Among Local Authorities in Malaysia, JURNAL TEKNOLOGI, Siri E, Penerbit UTM, 2004

12. Thermoforming Process Characterization by Using Statistical Design of Experiment Approach, JURNAL TEKNOLOGI, Siri E, Penerbit UTM, 2004

13. New Concept of Virtual Cellular Manufacturing, The Western Indian Journal of Engineering, University of West Indies, Trinidad and Tobago, 2005

14. An Overview of Manufacturing Strategies, TQM Magazine, MCB Press, UK, 2005 15. Progress of Quality Management Practices in Australia, TQM Magazine, MCB

Press, 2005 16. System Analysis of Efficient Production Processes for Productivity Enhancement,

IEM Journal, 2005 17. Pengurusan Kualiti Menyeluruh dan Prestasi Kerja, JURNAL TEKNOLOGI, Siri E,

Penerbit UTM, 2005 18. Ranking of Alarms in Conventional Control Charts: Case Study N(0.5,1), Jurnal

30

Mekanikal FKM, UTM, 2005 19. An instrument to measure the use of quality tools in manufacturing industries,

Conference on Manufacturing and Electronic Technology, SME UTM, 2005 20. Optimal buffer Allocation for Unpaced Balanced and u-balanced Production Line,

JURNAL TEKNOLOGI, Siri A, Penerbit UTM, 2006 21. A Study on Integrated Manufacturing Technologies in the Caribbean Manufacturing

Firms, The Western Indian Journal of Engineering, University of West Indies, Trinidad and Tobago, 2006"

22. ISO 9001:2000 Implementation in SME: A Case Study (JSSH-0222-2010), Journal mof Social Science and Humanities, Pertanika, UPM, August 2010

23. Journal of the Chinese Institute of Industrial Engineers, “The Barriers in Lean manufacturing Implementation”, October 2010

24. Reviewer International Conference on Industrial Engineering and Business Management 2010, Universitas Islam Sunan Kalijaga, Jogjakarta (2 papers)

25. Assessor Mechanical Journal FKM, ‘Supply Chain Strategies and Competitors Priority in Appliances Companies using AHP Method’ 22 Mac 2013

26. International Journal of Quality and Reliability Management (Emerald) Q1Journa l- Application and Limitation of Axiomatic Design Complexity in Quality Engineering, 3 Oct 2013

27. Integration of Lean Manufacturing and Quality management System through Structural Equation Modeling, in International Journal of Productivity and Quality Management, Inderscience Publishers, 29 July 2015

28. The impact of TQM on Organisational Performance: Evidence from Textile Sector of a Developing Country" for Total Quality Management & Business Excellence, Taylor and Francis. Manuscript CTQM-2015-0116

29. A COMPARATIVE EVALUATION OF CONTEMPORARY MODELS FOR LEAN MANUFACTURING PRACTICES International Journal of Services and Operations Management (IJSOM) IJSOM_128833 Jan. 2016

[ Continue to serve as reviewer in various international journal until today]

INTERNAL EXAMINERS Doctor of Philosophy / Engineering Doctorate

1. Lau Hoe Chai, Critical Soft factors for TQM Implementation in Malaysian companies,

Eng Doctorate. – UTM January 2001 2. Yeap Ming Keong, A Study on How Total Quality Management (TQM) Can Be

Implemented in the Construction Industry in Malaysia, Eng Doctorate – UTM April 2002

3. How Wei Ming Manufacturing Strategy and Its Implementation for Sheet Metal Working Machinery in Malaysia Internal Examiner Eng Doctorate – UTM June 2003

4. Ooi Keng Boon Engineering Doctorate (BATC) Does TQM Affect Employees’ Affective Reactions in the Malaysian Semiconductor Subcontracting Industry. Disember 2005

5. Norizah binti Mohamad – Eng Doctorate BATC-Warwick – the Involvement of Parts suppliers in Customer’s Product Development Activities in Automotive Industries in Malaysia – Viva 16 November2007

6. Tan Owee Kowang – PhD – FPPSM – New Product Development Performance within Research and Development based Companies in Malaysia -Viva 20 Jun 2012

7. Ibrahim Danjuma – PhD – (Mgt) – Service Quality, Customer satisfaction and attachment in Technological Universities in Nigeria - Viva 23 March 2013

8. Farhad Sanjarifard – PhD (Mgt) – Determination of Performance Measures in Small and Medium Enterprises in Manufacturing Sector – Viva 27 December 2013

31

9. Tiong Kung Leong – PhD (Mgt) – Implementation and Effectiveness of Non-Technical maintenance in Malaysia Construction Industry – Viva 22 Jan 2014

10. Mastora binti Mustafar – PhD (Mgt) – Fak Pengurusan, Kesan Amalan Pengurusan Kualiti ke atas Sumber P&P dan Prestasi Syarikat, Viva 11 Oktober 2015

11. Tengku Nur Azila binti Raja Mamat – PhD (Mechanical Engineering), Framework for the Establishment of the End-of –Life Vehicles Management System in Malaysia, Viva 11 August 2016

12. Muhammad Imran Qureshi – PhD (Mgt) – Work Design Practices for Sustainable Manufacturing Under Socio-Technical Context, Viva 18 August 2016

13. Lee Cheng Sheng PhD (Mechanical Engineering) A Knowledge Management Performance Measurement System for the Small and Medium Enterprises, Viva 30 November 2016

14. Mohamed Shamaun bin Yushak –PhD, MJIIT, - Moderation of Resistance to Change Using Lean Principles in Transforming Shipyard Operation, Viva 2 Feb 2017

15. Emelia Sari, PhD (Mechanical Engineering) Sustainable Maintenance Performance Measurement systems for Automotive Industry, Viva 10 April 2017

16. Hamed Golami PhD (Mechanical Engineering), Conceptualizing and Operationalizing Knowledge Capable Strategy in Higher Education Institutions Using Multi-Methods Approach, Viva 11 April 2017

17. Ikhwan bin Md Tab – PhD, MJIIT – Managing As-Built Engineering Drawing of Offshore Facilities Through Intelligent 3D Model, Viva 13 April 2017

18. Tan Li Pin, PhD Mechanical, FKM, A Knowledge management Based Prediction Model for Manufacturing Performance Using Structural Equation Modeling and Neural Network, Viva 18 July 2017

19. Mohd Zubairy Shamsudin, PhD Razak School, Instrument to Assess Work-Related Musculoskeletal Disorders Risk Factors for Industrial Manual Material Handling, Viva 8 August 2017

EXTERNAL EXAMINER- DOCTORATE 1. Shamsuddin Ahmed –PhD – UM – An Integrated Manufacturing Management

System for Enhancing Organizational Performance – March 2005 2. Sany Sanuri Mohd Mokhtar – Ph D UUM – The Interface Between Market Orientation

and Quality Orientation Attributes of Performance of Manufacturing Organization in Malaysia, Viva 21 November 2007

3. Mohamed Sattar Rasul, Ph.D. – UPM 2009 – Pembangunan Standard Pengukuran Kemahiran Employability Alat Ukur Tahap Kemahiran Employability Individu dalam memenuhi kehendak Majikan Industri Pembuatan Viva 9 Julai 2009 / 2 September 2010

4. Punavasvaran a/l Perumal PhD., - UPM – Lean Process Management Implementation through Enhanced Problem-Solving Capabilities Viva 28 Mei 2009

5. Norani Nordin PhD – UKM –Perlaksanaan Lean – Viva 29 Nov 2011 6. Ehsan Sadeh PhD – MMU –Improving European Foundation for Quality

management (EFQM) Excellecne Model for Implementation in Iranian SMEs – Viva 26 Nov 2012

7. Hilmi bin Hussein – PhD Uni Tek Petronas UTP (Mechanical) – Framework for Reliability Maintainability and Availability Analysis of Petrochemical Plant System During Operation Phase – Viva 12 October 2012

8. Low Shye Nee – PhD Pusat Pengajian Kej Mekanik USM, Development of Model to Enhance The Prioritized Solution in Process Improvement – Viva 13 April 2014

9. Mohd Faizal Ahmad Zaidi – PhD, Othman Yeop Graduate School of Business, UUM, Organizational Learning, Organizational Ambidexterity, Environmental Turbulence and NPD Performance of Malaysian’s Manufacturing Sector – Viva 26 May 2014

10. Mohd Akhir bin Ahmad, PhD, Othman Yeop Graduate School of Business, UUM, The

32

Moderating role of Sustainable Product Development in Relationship between Quality Management Practices: A Study in Malaysian Automotive Industry – Viva 25 May 2014

11. Mohd SaIful Izwaan bin Saadon – Doktor Falsafah (Pengurusan Kualiti dan Produktiviti) UKM, Pengintegrasian Model Kano dan Serqual ke Dalam Penempatan Fungsi Kualiti Bagi Pembinaan Program Latihan, Viva 18 Jun 2014

12. Norsiah binti Hami, PhD Kejuruteraan Pembuatan UteM, Sustainable Manufacturing Practices and Sustainability Performance, Viva 27 Ogos 2014

13. Esam Mohamed Ahmed Mustafa, Doktor Falsafah (Pengurusan Teknologi), Impact of Total Quality management Practices on Innovation in Service Organizations, Viva 18 November 2014

14. Shaliza Azreen binti Mustafa, PhD Pusat Pengajian Kej Mekanik USM, Performance Studies of Paralle Kanban-Base Stock System to Control Multi-Product Multi-Stage Production with Rework, Viva 8 Julai 2015

15. Mahmood Doroodian, Doktor Falsafah (Kejuruteraan Mekanik dan Bahan) UKM, Developing a Measurement Model of Innovation Capacity of Small and Medium Sized Enterprises (SMEs) Viva 30 Disember 2015

16. Sachit Vardhan, PhD, Sant Longowal Institute of Engineering and Technology, Longowal, Punjab India, Studies on the Implementation of Continued Total Productive Maintenance in Indian Industry to achieve Business Excellence, Reported on 27 July 2016

17. Tan Lay Hong, PhD (Technology management and Technopreneurship), UteM, Service Quality Implementation in Shaping Sustainable Banking Operating System: A Case Study of Maybank Group, Viva 12 October 2016

18. Asma ABU SAMAH, PhD “Event based probabilistic approach for proactive maintenance to improve production capacities in HMLV industries, University of Grenoble, France, Viva (Skype) 8th of Nov. 2016

19. Yeok Kim Hao, PhD (Mechanical Engineering) UTHM, Mathematical Modelling Method to Solve Line Balancing Problems for Disassembly Lines in Remanufacturing Industries, Viva 15 November 2016

20. Aref Mabrouk Rohoma Alkelani, PhD (Mechanical Engineering) UTHM, Effects of ISO 9001 and Organisational Culture as a Mediator between the TQM and Organisational Performance in Manufacturing Companies in Libya, Viva 7 February 2017 Asie e-University

21. Edly Ferhin bin Ramly, PhD Mechanical, UTHM, Development of a Diagnosis Framework for Selecting Operational Improvement Opportunities, August 2018

22. Mohd Norzaimi Che Ani, PhD Manufacturing UniKL, Sustainability of Lean Manufacturing System: The Model of Factory-In-Factory (FiF) Concept, 23 October 2018

23. Norasmiha binti Mohd Nor, PhD Technology Malaysia, UTHM, The Relationship Between Lean System and SME Performance: The Moderating Effect of Business Environment, 30 December 2018

24. Ang Wei Shang, PhD Technology Management, UTHM, Development of Total Quality Management Performance Model with Mediating Effect of Total Productive Maintenance, Kaizen and Innovation in Electrical and Electronic Industry, UTHM 4 August 2019

EXTERNAL EXAMINER MASTERS BY RESEARCH 1. Abdalsalam Mohamed A. Gader, The Motives for ISO 9000 Certification, Master of

Science (Manufacturing) Universiti Putra Malaysia – February 2004 2. Moftah Farag Saleh, Evaluating Training Programs on MS ISO 9001:2000 New

Standards in Accredited Organisations Master of Science (Manufacturing) Universiti Putra Malaysia – March 2004

3. Tariq Ramadan Abo-Alhol, Master of Science Universiti Putra Malaysia, The

33

Effectiveness of Quality Circles In Five Selected Companies, October 2004 4. Rebecca Au Hsio-Phing, Sarjana Sains (Teknologi Industri), Universiti Sains

Malaysia, Kajian Mengenai Latihan Berasaskan Kualiti Dalam Industri Pembuatan Bersaiz Besar di Pulau Pinang (A Study on Quality Related Training of Large Companies in Penang), Julai 2003

5. Koay Leeng Sze, Sarjana Sains (Teknologi Farmasi), Universiti Sains Malaysia, Development of Self Assessment Tools to Evaluate Quality Activities and System, April 2003

6. Sahala Siallagan, Sarjana Sains (Kejuruteraan Mekanik), Universiti Sains Malaysia, Implementation of Total Quality Management in Medan Manufacturing Industries, June 2004

7. Amjad MR Khalili, Sarjana Sains (Kejuruteraan Mekanik) Universiti Sains Malaysia A Study on the Effects of ISO 9000 Implementation on Malaysian Industries Manufacturing Performance: The Mediating Role of Soft and Hard Total Quality Management. April 2005

8. Musli Mohammad, Sarjana Sains (Pembuatan) Universiti Putra Malaysia, Strategies for Implementing Integrated Management systems in Malaysian Manufacturing Companies. December 2005

9. Mohamed Bachik bin Mohamed Hussain, Sarjana Sains (Kej. Mekanik) Universiti Sains Malaysia, Introduction of Graded Severity Ranking on Statistical Process Charts, May 2006

10. Yeap Tee Khoon – Sarjana Sains (Kej. Mekanik) 5SIM Business Process Modeling for Improvement Initiatives Through Lean Six Sigma approach, USM 27 Mac 2007

11. Noor Kamariah Kamaruddin – Master of Science (Management of Technology) – Factors Affecting Supply Chain Technology Adoption: An Empirical Study Amongst suppliers of the National Car Manufacturers in Malaysia. Universiti Utara Malaysia (UUM) May 2007

12. Shamini a/p Patpanavan – Master of Science (Mechanical) – Effectiveness of Quality System Implementation on Selected Local Vendors in the Malaysian Automotive Industry. - September 2007

13. Alireza Esfandyari – Sarjana Sains (Kej. Industri dan Sistem) Value Stream Mapping Application Using Simulation to Reduce Production Lead Time, Uni Putra M’sia (UPM) 19 Februari 2008

14. Farizah Mamat @Mohd Nor – Master of Technology Management of Technology) – Universiti Utara Malaysia (UUM) 13th May 2008

15. Afdiman Anuar – Master of Science (Industrial and Systems Engrg) UPM – Benchmarking of Best Manufacturing Practices in Malaysian SMEs – August 2008

16. Seyed Ali Ashgar Tayeeh Morsal – Master of Science (IE and Systems) UPM – Developing a New Self Assessment Model To Study Effects of Maturity of QMS - – October 2008

17. Rosmaizura Mohd Zain – Sarjana Sains (Kejuruteraan Mekanik dan Bahan) UKM – Kawalan Proses Berstatistik di Industri Kecil dan Sedrhana September 2009

18. Low Chee Keong – Sarjan Kejuruteraan Mekanikal USM – A Conceptual Frameowrk for Deployment of Process Improvement from the Manufacturing Perspective Viva 27 April 2011

19. Tan Jun – Sarjana Sains (Kejuruteraan Mekanik) UKM – Pembangunan Perisian untuk mempermudah pelaksanaan dan mengoptimumkan keputusan proses penandaarasan Viva 18 Mei 2012

20. Suresh a/l Vasu – Master of Science in Manufacturing Engineering – UteM Melaka – Development of Lean-Environmental Management (EMS) Integration Model – Viva 19 November 2013

21. Rano Khan Wassan, M Sc Mechanical Engineering – Universiti Teknologi Petronas, Semi-Quantitative Risk Assessment Model for Rotating Equipment, Viva 27 June 2014

22. Mohd Hazaoma bin Abu Hassan Master of Science (Manufacturing) A Service

34

Quality Assessment Based Upon Manufacturing Industries Perception to State Government of Melaka, Viva on 2 March 2016

23. Nur Syazwani binti Abd Suki, Master of Science (Mechanical Engineering), USM, Model for Quality Improvementin the Semiconductors Company Based on Manufacturing Tools and TIPS Techniques, Viva 23 November 2016

24. Nurul Aida binti Harun, Master of Science (Mechanical Engineering), USM, An Application of DMAIC Methodology with the aid of CAPA Concept for Quality Improvement in Semiconductor Industry, Viva 19 Disember 2016

SERVICES/CONTRIBUTIONS TO UNIVERSITY AND SOCIETY NATIONAL LEVEL CONTRIBUTIONS 1. Penilai Buku Terbitan Universiti Teknologi Tun Hussein Onn Malaysia, “Total Quality

Management Based on Japanese Approach”, Julai 2011 2. Panel member for Colloquium Review of Malaysia Business Excellence Framework,

25 January 2011 organized by Malaysia Productivity Corporation, PJ 3. Panel Jawatankuasa Teknikal “Quality Management Excellence Award 2011”

Secretariat Malaysia Productivity Corporation, September 2011 4. Penghargaan Sumbangan Pembangunan Malaysia Standard MS 474-12:2010 Test

Method for Automotive Friction Materials, MS 2321:2010 Road Vehicles – Telescopic Shock Absorbers for Suspension Systems

5. PENILAI BUKU ANUGERAH MAPIM 2014 KATEGORISAINS DAN TEKNOLOGI Judul: Lean Manufacturing: Tools and Techniques Penulis: Puvanasvaran A. Perumal, Penerbit Universiti Teknikal Malaysia, Melaka Mac 2015

6. Penilai Buku Terbitan Universiti Tun Hussein Onn Malaysia"Total Quatity Management (TQM): Is Survival Compulsory?'' Jun 2015

7. Penilai Buku Terbitan Universiti Tun Hussein Onn Malaysia" Application of Structural Equation Modeling (SEM) in Quantitative Research'' Nov 2015

8. Penghargaan Sumbangan Pembangunan Malaysia Standard MS ISO 26867:2012 Road Vehicles – Brake lining friction Materials – Friction behavior assessment for brake systems

9. Panel Penilai Seminar Penyelidikan Doktor Kejuruteraan Pengajian Siswazah UTeM, Melaka 7 Julai 2013

10. Expert panel validation proposed “Quality, Environmental, Energy and health Safety management system (QEENHSMS) Integration Guide’ from UTHM, Batu Pahat 6 july 2014

11. Penilai Pakar Garis Panduan Penggredan dan Pembaharuan Permit Institut Memandu Malaysia, LAntikan Institut Penyeldidikan Keselamatan Jalanraya Malaysia (MIROS) 28 Sep 2016

12. Expert Panel Member for Reviewing New Engineering Doctorate (D.Eng) Programme for University Teknologi Petronas, 8-10 September 2017, Putrajaya Marriot

UNIVERSITY LEVEL CONTRIBUTIONS 1. Technical Evaluator for Intensified Research Priority Area (IRPA) EAR Proposals

RMK 8 (June 2001, April 2003) 2. Facilitator Research Methodology Course 2003, 2005 3. Selection Panel Expert for UTM Vice Chancellor’s Quality Award (AKNC) 2002 4. Audit Panel for UTM VC Quality Award 2002-2006 5. Review Committee for VC Quality Award Criteria 2005 6. Chairman Audit Panel VC Quality Award 2007 7. Audit Panel Member AKNC UTM 2008

35

8. Facilitator for QA Practices and System Development based on Ministry of Education requirement for Faculty of Mechanical Engineering 2004

9. Facilitator / Lecturer for Quality Assurance in Higher Education Module for Lecturer’s Competency Level Assessment (Grade DS 45 and DS 52) 2004-2006

10. Facilitator / Lecturer for Workshop on MOE QA Document Preparation May 2004 11. Internal Auditor for QA Assessment for FPPSM Feb 2006 12. Personality Assessment Panel for TK 5 Candidates (Grade DS 52) 2008 13. Pelantikan Juruaudit Dalaman Peniaian Audit Prestasi akademik (APA) UTM 3

November 2009 14. Ahli Panel Penilai Anugerah Kualiti Naib Canselor (AKNC) 2009 15. Panel Penilai Anugerah Kualiti Perkhidmatan 2010 (AKP) (Surat 3 Jan 2011) 16. Penilai Kertas Kerja Geran Universiti Penyelidikan (GUP) Penyelidik Razak School 8

Februari 2011 17. Panel Penilai Anugerah Kualiti Perkhidmatan (AKP) 2011 (Surat 1 Feb 2012) 18. Panel Penilai Pra-Audit SwaAkreditasi UTM KL 21-22 Jun 2012 19. AJK Pengurusan Nilai UTM KL mulai 24 Julai 2012 20. Peer Review Panel Permohonan Prof Madya MJIIT 24 September 2012 (Dr Saiful

Amri) 21. Peer Review Panel Permohonan Prof Madya Razak School 19 Oktober 2012 (Dr

Khairur Rijal) 22. Auditor Panel Anugerah Kualiti Perkhidmatan (AKP) (Service Quality Award) 2012 23. Peer Review Panel Permohonan Jawatan Profesor Gred Khas C (VK7) Kontrak di

Razak School – Dr Dominic Lau 19 Sep 2013 24. Task Force Differentiated Career Pathways (DCP)for Academic Staff - (Professional

Track) 2015-2017 25. AJK Halatuju Kurikulum Abad 21 UTM (20.6.16 – 19.6.17) 26. AJK Integriti dan Tadbir Urus UTM (Akademik dan Antarabangsa) 28.2.2016. bawah

TNCAA 27. Panel Penilai Teknikal Penilai Proposal GUP Tier 1 2017/1 Niche Area Frontier

Materials 28. Ahli Task Force Bidang Tumpuan Utama: Kecemerlangan Pembelajaran dan

Pengajaran bagi Pelan Global UTM 2012-2020 (Fasa III: 2018-2020) 29. KetuaPanel Penilai Akreditasi Penuh Program Sarjana Sains (Kejuruteraan

Aeronautik) FKM, UTM Jun 2018 FACULTY LEVEL COMMITTEE 1. Faculty of Mechanical Engineering (FKM) Journal Committee and Editor Jurnal

Mekanikal, (2000 - 2004) 2. Research Coordination Committee Faculty of Mechanical Engineering 3. Course Facilitator ISO 9000 for FKM 4. Member Committee 2nd International Conference Advanced Mfg Technology,

(ICAMT) 2000, UTM 5. Vice Chairman, National Ergonomics Conference, June 2002, Johor Bahru 6. Administrative Board Committee (AJK Pentadbiran) FKM 2004 7. Working Committee Member Program Accreditation FKM (2005) 8. Committee Member New Programme Manufacturing Engineering and Industrial

Engineering, FKM, (2005-now) 9. Coordinator New Program Master Engineering Industrial Engineering 10. Ad-hoc Committee Member Visiting Professor –Prof El-Sayed Rutgers University,

2006 11. Pengurus Engineering Doctorate BATC 2009 12. Ahli Jawatankuasa Akademik Razak School Ogos 2010-2012 TALKS / SEMINARS / TRAINING PROVIDED

36

1. Modul ‘Improving Process Capability and Control’ di LIKOM Plastic Industries Melaka

(Julai 2000) 2. Modul Quality Management , IPPMS Program by CEPP di Tioxide (M) Sdn Bhd.

(Sept 2000) 3. Ceramah ‘Meningkatkan Industri Pengeluaran Bumiputra Ke Peringkat Global,

Bengkel Masyarakat Perdagangan dan Perindustrian Johor , Hyatt Johor Bahru, Ogos 2002

4. Trainer for Executive Development Program MSE Pasir Gudang - “Project Management” module

5. Trainer for Short Course “Quality Improvement Tools” for Hitachi Chemical Sdn Bhd.2005

6. Trainer for Short Course “ISO 9000:2000 Internal Quality Auditing” and “The Making of a Continually Improving Employee” for UEM Academy Bhd. 2002

7. Facilitator for Certified Quality Engineer (CQE) Programme organized by BATC – Module Quantitative Methods I – December 2003 (KL Group) 3-4 January 2004, 15-16 January 2005 (Penang Group)

8. Presenter “CIMA- UTM Managerial Leadership Colloquium - Paper titled - Achieving Business Excellence through Six Sigma, PJ Hilton, 11 Jun 2003

9. Quality Talk “Pengurusan Kualiti Secara Total’ – Kualiti Alam Sdn Bhd. Safety Environment Quality Week, 17th Nov 2003

10. Talk in Seminar on Creative Thinking and Quality Learning, Kolej Universiti Teknologi Tun Hussein Onn, (KUITTHO), Parit Raja, 20 Feb 2004

11. Talk on ‘UTM Experiences with Industry’ at Seminar on the Application of IE Techniques for Excellence, NPC Southern Region, August 2006

12. Trainer Degree++ Programme TQM Module 2008 13. Trainer for Total Quality Management Module MISC-FMS UTM Programme 31st

March 2008-4th April 2008 14. Trainer Short Course on Project Management 23rd -25th November 2009, BATC-

Ministry of Defence -JLJ 15. Penceramah KURSUS PENYELIAAN PROGRAM PHD INDUSTRI 30 Mac 2011-1

April 2011, Quality Hotel KL, 16. Penceramah Kursus Latihan Penyelia PhD Industri, 11-13 Februari 2012, Bayview

Hotel Melaka 17. Penceramah Industri Modul ‘Quality Reliability and Maintainability’ Program MSc.

EBM for Defense and Security anjuran UPNM 25 Julai 2012, Pusat Teknologi Maklumat dan Komunikasi, UPNM Sungei Besi, KL

18. Speaker for Workshop Postgraduate Thesis Assessment for Academic Staff, PPS UteM, 29 April 2013

19. Short Course on Review of ISO 9000 Quality Management System for IWK – April 2013

20. Penceramah Industri Modul ‘Quality Reliability and Maintainability’ Program MSc. EBM for Defense and Security anjuran UPNM 27 Mei 2013, Bilik Mesyuarat NIEEd, UPNM Sungei Besi, KL

21. Fasilitator Bengkel Autonomi UTM Razak School of Engineering and Advanced Technology, 30 Mei 2013

22. Fasilitator Lean Management Project HCM UTM 3 Jun 2014 23. Guest Speaker “How to Defend your Thesis – Getting Through Your Thesis

Examination Excellently, Organised by UTM International Office, 18 March 2015 24. Talk on Postgraduate Programmes for Project Management Career Advancement at

IEM PJ 27 April 2016 Organized by Proejct Mgt Technical Division IEM 25. Speaker and Facilitator Supervisory Development Program (AS102) by UTMLead 5

May 2016 26. Trainer “Thesis Preparation and Writing for Doctoral Industry’, organised by SPS KL

18 February 2017

37

CONSULTANCY AND INDUSTRY NETWORK 1. Short Course on ISO 9001:2008 and Total Quality Management for Indah Water

Consortium, Damansara on 7th and 8th January 2010( Consultancy - RM 4000) 2. Facilitator Short Course Project Management 12-15 Julai 2010. AlMuthanna

University Iraq (Consultancy RM200/hr) 3. Fasilitator Kursus Pendek Mechanical and Electrical 22-30 Nov 2010 ALMuthanna

University Iraq (Consultancy RM200/hr) 4. HLAA Short Course on Operation Management, 21-25 Dec 2014, High Level Aviation

Academy, Khartoum Sudan (Net Income to Razak School :USD40,000)

CURRICULUM VITAE - WordPress.com

Documents

Transcript of CURRICULUM VITAE - WordPress.com