CONSTRUCTION EQUIPMENT - Educational Services ...

CONSTRUCTION EQUIPMENT

U.S. PRICE BOOK

C091

MOTOR GRADERS – C Series

PL-200 GR SAP REVISION 7

EFFECTIVE JULY 9, 2021

THIS IS AN ELECTRONIC COPY ONLY – HARD COPIES WILL NOT BE DISTRIBUTED. This price list is intended for dealers with the Motor Graders (GR) contract only. The prices included in this revision supersede any prices established prior to the effective date shown unless specifically identified in a price bulletin as superseding this price list. Below is a list of Family(s) and Model(s) that are included in this price list. Motor Graders – GR9E Stage V 836c 4WD 836c AWD 856c 4WD 856c AWD PLEASE NOTE: Retain the price book pages of the discontinued series for your records.

Copyright 2021 By

CNH Industrial America LLC

Case -2021 Price ListEducational Services Commission of New Jersey

NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25

Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22: EXtended to 2/21/23

(This page intentionally left blank)




General Information

Prices shown herein are suggested prices only and in no way are they to be construed as limiting or restricting the dealer in his determination of the ultimate retail selling price. It is understood that the dealers are free to determine their selling price. Subject to any Federal, State or local laws. Where shown herein liquid capacities are U.S. measure unless otherwise noted.

ADVANCE FREIGHT Advance freight will be added to the machinery invoice as a separate net charge for machinery shipped from field locations or from other than specified Ex Works locations. PRICES Prices are Ex Works factory, where the goods are manufactured, except where noted. For detailed information concerning prices, please refer to your OPERATING GUIDE. Prices and specifications are subject to change without notice. CONTENTS OF ORGANIZATION Case Construction Equipment Inc issues price lists and revisions covering each Case contract. U.S. Price List is published in U.S. funds. Canadian Price List is published in Canadian funds. Assure that you are using the correct price list. The Canadian price lists are denoted by a Maple Leaf on the price list cover page and the symbol “(CDN)” is printed at the head of the Factory Supplied Attachments List columns. Freight, duty and sales taxes are NOT included in any wholegoods or attachment prices shown in the price list. Any appropriate freight, duty, Federal, State, and Provincial taxes will be added to the machinery invoice as separate net charges. PROCEDURE The price pages for each machine (or group of machines) lists both “Factory” and “Factory Supplied Attachments”. Each price list is comprised of the various machines sold under that contract. Each price book section has “Factory”, “Factory Supplied Attachments”, or “Third Party Supplied Attachments” pages. When ordering and pricing a machine follow the ordering instructions listed for that machine. Attachments listed following the “Factory Supplied Attachments” or “Third Party Supplied Attachments” heading are available for installation in the field. ATTACHMENTS Expect Attachments to be shipped within 2 -3 weeks from order entry.




General Information

DISTRIBUTION OF PRICE LISTS / REQUESTS FOR ADDITIONAL COPIES Price lists will be provided electronically via that Dealer Portal. Contact information for additional copies of Case Construction Equipment Price Lists Additional price lists, divider tabs and binders may be ordered at the Document Management Center. From Dealer Portal click on Tools then Document Management Center link. Any questions you can call the Document Management Center at 262-636-7540 You will only receive price lists for contracts covered by your current Dealer Agreement with the Company. The revisions are dated and are effective as of that date. However, PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.




MOTOR GRADERS

GR-7GR-8

GR-13GR-14

GR-19GR-20

GR-25GR-26GR-30

856c 4WD MOTOR GRADERSStandard Features ……..……………….……………………………………………………..Price List ………………………………….…….………………………………………………

Standard Features ……..……………….……………………………………………………..856c AWD MOTOR GRADERS

836c 4WD MOTOR GRADERS

MOTOR GRADERSTABLE OF CONTENTS

Price List ………………………………….…….………………………………………………

Standard Features ……..……………….……………………………………………………..Price List ………………………………….…….………………………………………………

Standard Features ……………..……………………………………..……………………….

836c AWD MOTOR GRADERS

Price List ………………………………….…….………………………………………………Service Parts




(Ex Works Port of Entry)

836C 4WD CASE MOTOR GRADERUS PRICE LIST

-GR9E 01

Standard Equipment

DIESEL ENGINE: Adjustable Saddle for 90° Bank Case/FPT 6.7 LT, Common Rail Slope Tier 4 Final Moldboard Cutting Angle DOC + SCRoF after treatment Hydraulically Adjustable up to 50° Dual Power Engine Management High-Grade Steel Moldboard with From 1st to 3rd Gear - 102 KW/ Hardened Rounded Guides 137HP Control Levers for Precise and From 4th to 6th Gear - 115 KW/ Simultaneous Moldboard Operations 154 HP Internal Gearings, Sealed, Backlash- Cold Start Free & Self adjusting Slewing Ring ROPS/FOPS Rollover & Falling Object Operating on 360° Protection System Direct Connection of Control Levers CAB: Suspended on rear frame on Main Hydraulic Valve for Precise Low Profile Cab and Simultaneous moldboard Height to top of cab 3060mm operations (10' 0.5") Hydraulic & Dual-Circuit Accumulator Two Lockable swinging Doors for Brake System Operating on both side Access Tandem Wheels Lower Front Openable Windows Hydraulic Ready for rear attachments Heat & Air Conditioning Wet Multi-Disc Type Parking Brake Tinted safety Glass Operating on Transmission Front & Rear Sunshield Front Wheel Spindle Steering with Road Traffic Lights adjustable steering Column Adjustable Operators Seat Fuel Tank Capacity 278 LT/ 73 Gal Battery Main Switch Ad Blue Tank Capacity 54 LT/ 14 Gal Load Sensing Hydraulic System w/ Front & Rear Fenders variable Displacement Pump Backup Alarm Powershift Transmission with 6 Forward & 3 Reverse Speeds CASE ProCare - Full Machine Protection Torque Converter Integrated in Factory Warranty (3-yr/3000-hr), Gearbox Planned Maintenance (3-yr/2000-hr) Autoshifting Function and SiteWatch™ telematics CASE SiteWatch™ Telematics Max Forward Speed 38 KM/H Max includes hardware and a 3-yr Reverse Speed 27.9 KM/H Advanced data subscription WARRANTY: 15° Oscillating Front Axle with 17° 1-Year/Unlimited-Hour Full Hydraulic Lean Adjustment Coverage Base Limited Warranty 15° Oscillating Tandem Axle with 2-Year/ 2,000 Hour Extended Automatic No-Spin Differential Engine Warranty

-GR9E 01 C091 000 09-JUL-21


NJ State Approved Co-op #65MCESCCPSGrounds Equipment - Bid #ESCNJ 18/19-25




-GR9E 01

Models

COMMERCIAL MODEL Weight Factory Data List Price 836C/ 4WD/ CASE/ STAGE 5 26,466 LB $284,510.00

-GR9E 01 C091 000 09-JUL-21






-GR9E 01

Factory Supplied Options

Order Code Description Weight Factory Data List Price

OPERATOR'S MANUAL

SD_47083 OPERATOR'S MANUAL

788513 OPERATORS MAN ENG NA

North America English Ops manual

No Charge

788514 OPERATORS MAN FRE NA

French Operator's Manual

No Charge

788515 OPERATORS MAN SPA NA

Spanish Operator's Manual

No Charge

MOLDBOARDS

SD_Z5405 MOLDBOARD

783120 MOLDBOARD 3355MM

11' Moldboard

No Charge


8' Moldboard

($63.00)


10' Moldboard

$502.00

SD_Z5409 MOLDBOARD EXTENSION

XZ5409X NO MOLDBOARD EXTENS No Charge

783128 MOLDBOARD EXTENSION

Moldboard extension 610mm (2') right side

$626.00




Moldboard Bilateral Extensions (for Higher Material

Retention) R&L bolt on side plates to the moldboard.

$591.00

SD_Z5428 MID MNT MOLDBOARD A

783942 MDB.SUPPORT NO SCAR

Moldboard Support W/O Scarifier

No Charge

783129 MOLDBOARDSCARIFIER

4 Teeth Tiltable Moldboard Scarifier

$3,213.00

SD_Z5429 MOLDBOARD HYDRAULIC

783517 Lift Cylinder Check Valve No Charge

783516 Moldboard Float Controls $1,956.00

-GR9E 01 C091 000 09-JUL-21






-GR9E 01

WHEELS AND TIRES

SD_16066 WHEELS AND TIRES

9430359 405/70 R20 SPT9

Dunlop

No Charge

9430352 455/70 R20 STP9

Dunlop

$2,865.00

9430737 W. 405/70R24 SPT

Dunlop

$3,808.00

9430388 420/75 R20 XMCL TL

Michelin

$1,337.00

ADDITIONAL EQUIPMENT GRA

SD_02079 FUEL TANK

783939 STANDARD FUEL TANK No Charge

783145 FUEL TANK W.REFILL

Fuel Tank with refill pump (50LT/Min)

$925.00

SD_05085 REAR VIEW CAMERA & MONITOR

X05085X No Rear View Camera No Charge

783543 REAR CAMERA $1,671.00

SD_06026 LIGHT PACKAGE

X06026X No additional Work Lights No Charge

788505 LED LIGHT WORK PKG $798.00

SD_37002 AUTOMATIC LUBRICATI

X37002X NO AUTOMATIC LUBRIC No Charge

788504 AUTOM. LUBRIFIC.SYST

Automatic Lubrication System

$6,908.00

SD_41009 DRAWBAR & CIRCLE

783935 Standard Circle Drive No Charge

783126 Protected Circle Drive

Heavy Duty

$3,497.00

SD_43004 TOOL BOX RH

X43004X No Tool Box No Charge

783149 SET OF TOOLS, COMPL

Toolbox with set of tools (Includes: lockable tool box,

hammer, grease gun, wrench, screwdriver, set of keys,

tire inflate hose)

$285.00

-GR9E 01 C091 000 09-JUL-21






-GR9E 01

SD_49029 PACKAGING

X49029X No Packaging No Charge

783154 Preserv. Sea Transport

Provides protection against corrosion during transport & storage.

No Charge

SD_Z5101 FRONT ATTACHMENTS

783011 Front Counterweight

Front Counterweight Group (510 KG) / 1,124 lbs.

No Charge

783132 FR.BLADE PARALEL DE

Front Blade with Parallel Geometry and Mechanical Depth

Indicator

$3,782.00

SD_Z5201 REAR RIPPER OR COUNTERWEIGHT

783941 REAR COUNTER WEIGHT

Rear Counterweight 285 KG / 628 lbs. (783338 Hydraulic

Preparat. -Hyd ready for rear attachments is in Base)

No Charge

788516 REAR RIPPER WITH 5 T

Ripper with 5 Teeth. (783338 Hydraulic Preparat. - Hyd

ready for rear attachments is in Base)

$7,051.00

SD_Z5601 REAR HOOK

XZ5601X No Rear Hook No Charge

783514 Rear Hook $175.00

SD_Z5701 BLADE GUIDANCE/CTRL

XZ5701X No Blade Guidance No Charge

783558 Leica Blade Guidance $18,194.00

783559 Topcon Blade Guidance $21,584.00

783560 Trimble Blade Guidance $19,487.00

CAB ACCESSORIES

SD_05136 RADIO OPTION

783937 No Radio (Storage Box) No Charge

783115 AM/FM Radio

Bluetooth Radio - Features include Bluetooth connectivity

for phone calls and music playback, AM/FM tuner and

audio Aux-in.

$300.00

MISCELLANEOUS

SD_30045 WHEEL CHOCKS KIT

X30045X No Wheel Chocks No Charge

788506 WHEEL CHOCKS 788506 $173.00

-GR9E 01 C091 000 09-JUL-21






-GR9E 01

LIGHTS

SD_30047 WARNING LIGHTS

X30047X No beacon light No Charge

783064 Strobe light $285.00

-GR9E 01 C091 000 09-JUL-21





836C AWD CASE MOTOR GRADERUS PRICE LIST

-GR9E 02

Standard Equipment

DIESEL ENGINE: E.D.C.V. Electronic Drive Control Case/FPT 6.7 LT, Common Rail Volume & Hydraulic Differential Tier 4 Final Creep Mode: Minimum Speed 400M/H DOC + SCRoF after treatment Adjustable Saddle for 90° Bank Dual Power Engine Management Slope From 1st to 3rd Gear - 102 KW/ Moldboard Cutting Angle 137HP Hydraulically Adjustable up to 50° From 4th to 6th Gear - 115 KW/ High-Grade Steel Moldboard with 154 HP Hardened Rounded Guides Cold Start Direct Connection of Control Levers ROPS/FOPS Rollover & Falling Object on Main Hydraulic Valve for Precise Protection System and Simultaneous moldboard CAB: Suspended on Rear Frame operations Low Profile Cab Internal Gearing, Sealed, Backlash- Height to top of cab 3060mm Free & Self adjusting Slewing Ring (10' 0.5") Operating on 360° Two Lockable swinging Doors for Hydraulic & Dual-Circuit Accumulator both side Access Brake System Operating on Lower Front Openable Windows Tandem Wheels Heat & air conditioning Hydraulic Ready for rear attachments Tinted safety Glass Wet Multi-Disc Type Parking Brake Front & Rear Sunshield Operating on Transmission Road Traffic Lights Front Wheel Spindle Steering with Adjustable Operators Seat adjustable steering Column Battery Main Switch Fuel Tank Capacity 278 LT/ 73 Gal Load Sensing Hydraulic System w/ Ad Blue Tank Capacity 54 LT/ 14 Gal variable Displacement Pump Front & Rear Fenders Powershift Transmission with 6 Backup Alarm Forward & 3 Reverse Speeds Torque Converter Integrated in CASE ProCare - Full Machine Protection Gearbox Factory Warranty (3-yr/3000-hr), Autoshifting Function Planned Maintenance (3-yr/2000-hr) and SiteWatch™ telematics Max Forward Speed 38 KM/H Max CASE SiteWatch™ Telematics Reverse Speed 27.9 KM/H includes hardware and a 3-yr Advanced data subscription 15° Oscillating Front Axle with 17° WARRANTY: Hydraulic Lean Adjustment 1-Year/Unlimited-Hour Full 15° Oscillating Tandem Axle with Coverage Base Limited Warranty Automatic No-Spin Differential 2-Year/ 2,000 Hour Extended Hydrostatic Front-Wheel Drive with Engine Warranty

-GR9E 02 C091 000 09-JUL-21






-GR9E 02

Models

COMMERCIAL MODEL Weight Factory Data List Price 836C/ AWD/ CASE/ STAGE 5 27,128 LB $305,561.00

-GR9E 02 C091 000 09-JUL-21






-GR9E 02



OPERATOR'S MANUAL




No Charge



No Charge



No Charge

MOLDBOARDS

SD_Z5405 MOLDBOARD


11' Moldboard

No Charge


8' Moldboard

($63.00)


10' Moldboard

$502.00





$626.00






$591.00




No Charge

783129 MOLDBOARDSCARIFIER


$3,213.00




-GR9E 02 C091 000 09-JUL-21






-GR9E 02

WHEELS AND TIRES


9430359 405/70 R20 SPT9

Dunlop

No Charge

9430352 455/70 R20 STP9

Dunlop

$2,865.00

9430737 W. 405/70R24 SPT

Dunlop

$3,808.00

9430388 420/75 R20 XMCL TL

Michelin

$1,337.00


SD_02079 FUEL TANK




$925.00



783543 REAR CAMERA $1,671.00








$6,908.00




Heavy Duty

$3,497.00






tire inflate hose)

$285.00

-GR9E 02 C091 000 09-JUL-21






-GR9E 02

SD_49029 PACKAGING




No Charge




No Charge



Indicator

$3,782.00





No Charge




$7,051.00

SD_Z5601 REAR HOOK


783514 Rear Hook $175.00






CAB ACCESSORIES



783115 AM/FM Radio



audio Aux-in.

$300.00

MISCELLANEOUS



788506 WHEEL CHOCKS 788506 $173.00

-GR9E 02 C091 000 09-JUL-21






-GR9E 02

LIGHTS




-GR9E 02 C091 000 09-JUL-21






-GR9E 03

Standard Equipment

DIESEL ENGINE: Automatic No-Spin Differential Case/FPT 6.7 LT, Common Rail Adjustable Saddle for 90° Bank Tier 4 Final Slope DOC + SCRoF after treatment Moldboard Cutting Angle Dual Power Engine Management Hydraulically Adjustable up to 50° From 1st to 3rd Gear - 129 KW/ High-Grade Steel Moldboard with 173HP Hardened Rounded Guides From 4th to 6th Gear - 142 KW/ Direct Connection of Control Levers 190 HP on Main Hydraulic Valve for Precise Cold Start and Simultaneous moldboard ROPS/FOPS Rollover & Falling Object operations Protection System Internal Gearings, Sealed, Backlash- CAB: Suspended on rear frame Free & Self adjusting Slewing Ring Low Profile Cab Operating on 360° Height to top of cab 3150mm Hydraulic & Dual-Circuit Accumulator (10' 4.0") Brake System Operating on Two Lockable swinging Doors for Tandem Wheels both side Access Hydraulic ready for rear attachments Lower Front Openable Windows Wet Multi-Disc Type Parking Brake Heat & air conditioning Operating on Transmission Tinted safety Glass Front Wheel Spindle Steering with Front & Rear Sunshield adjustable steering Column Road Traffic Lights Fuel Tank Capacity 278 LT/ 73 Gal Adjustable Operators Seat Ad Blue Tank Capacity 54 LT/ 14 Gal Battery Main Switch Front & Rear Fenders Load Sensing Hydraulic System w/ Backup Alarm variable Displacement Pump Powershift Transmission with 6 CASE ProCare - Full Machine Protection Forward & 3 Reverse Speeds Factory Warranty (3-yr/3000-hr), Torque Converter Integrated in Planned Maintenance (3-yr/2000-hr) Gearbox and SiteWatch™ telematics Autoshifting Function CASE SiteWatch™ Telematics includes hardware and a 3-yr Max Forward Speed 39.9 KM/H Max Advanced data subscription Reverse Speed 29.2 KM/H WARRANTY: 1-Year/Unlimited-Hour Full 15° Oscillating Front Axle with 17° Coverage Base Limited Warranty Hydraulic Lean Adjustment 2-Year/ 2,000 Hour Extended 15° Oscillating Tandem Axle with Engine Warranty

-GR9E 03 C091 000 09-JUL-21






-GR9E 03

Models

COMMERCIAL MODEL Weight Factory Data List Price 856C/ 4WD/ CASE/ STAGE 5 33,966 LB $327,857.00

-GR9E 03 C091 000 09-JUL-21






-GR9E 03



OPERATOR'S MANUAL




No Charge



No Charge



No Charge

MOLDBOARDS

SD_Z5405 MOLDBOARD

783122 MOULDB.3660MM

12' Moldboard

No Charge


10'9" Moldboard

$722.00


13' Moldboard

$539.00





$828.00






$713.00




No Charge

783130 MOLDBOARDSCAR783130


$4,090.00




-GR9E 03 C091 000 09-JUL-21






-GR9E 03

WHEELS AND TIRES


9430384 17.5 R25 XHA <2500M

Michelin

No Charge

9430357 17.5 R25 XTLA G2

Michelin

($699.00)


SD_02079 FUEL TANK




$925.00



783543 REAR CAMERA $1,671.00








$7,542.00




Heavy Duty

$4,514.00






tire inflate hose)

$285.00

SD_49029 PACKAGING




No Charge

-GR9E 03 C091 000 09-JUL-21






-GR9E 03




No Charge



Indicator

$4,930.00





No Charge




$8,011.00

SD_Z5601 REAR HOOK


783514 Rear Hook $229.00






CAB ACCESSORIES



783115 AM/FM Radio



audio Aux-in.

$300.00

MISCELLANEOUS



788506 WHEEL CHOCKS 788506 $202.00

LIGHTS




-GR9E 03 C091 000 09-JUL-21






-GR9E 04

Standard Equipment

DIESEL ENGINE: Volume & Hydraulic Differential Case/FPT 6.7 LT, Common Rail Creep Mode: Minimum Speed 400M/H Tier 4 Final Adjustable Saddle for 90° Bank DOC + SCRoF after treatment Slope Dual Power Engine Management Moldboard Cutting Angle From 1st to 3rd Gear - 129 KW/ Hydraulically Adjustable up to 50° 173HP High-Grade Steel Moldboard with From 4th to 6th Gear - 142 KW/ Hardened Rounded Guides 190 HP Control Levers for Precise and Cold Start Simultaneous molboard Operations ROPS/FOPS Rollover & Falling Object Internal Gearing, Sealed, Backlash- Protection System Free & Self adjusting Slewing Ring CAB: Suspended on Rear Frame Operating on 360° Low Profile Cab Direct Connection of control Levers Height to top of cab 3150mm on Main Hydraulic Valve for precise (10' 4.0") and simultaneous moldboard Two Lockable swinging Doors for Operations both side Access Hydraulic & Dual-Circuit Accumulator Lower Front Openable Windows Brake System Operating on Heat & Air Conditioning Tandem Wheels Tinted safety Glass Hydraulic ready for rear attachments Front & Rear Sunshield Wet Multi-Disc Type Parking Brake Road Traffic Lights Operating on Transmission Adjustable Operators Seat Front Wheel Spindle Steering with Battery Main Switch adjustable steering Column Load Sensing Hydraulic System w/ Fuel Tank Capacity 278 LT/ 73 Gal variable Displacement Pump Ad Blue Tank Capacity 54 LT/ 14 Gal Powershift Transmission with 6 Front & Rear Fenders Forward & 3 Reverse Speeds Backup Alarm Torque Converter Integrated in Gearbox CASE ProCare - Full Machine Protection Autoshifting Function Factory Warranty (3-yr/3000-hr), Planned Maintenance (3-yr/2000-hr) Max Forward Speed 39.9 KM/H Max and SiteWatch™ telematics Reverse Speed 29.2 KM/H CASE SiteWatch™ Telematics includes hardware and a 3-yr 15° Oscillating Front Axle with 17° Advanced data subscription Hydraulic Lean Adjustment WARRANTY: 15° Oscillating Tandem Axle with 1-Year/Unlimited-Hour Full Automatic No-Spin Differential Coverage Base Limited Warranty Hydrostatic Front-Wheel Drive with 2-Year/ 2,000 Hour Extended E.D.C.V. Electronic Drive Control

-GR9E 04 C091 000 09-JUL-21






-GR9E 04

Models

COMMERCIAL MODEL Weight Factory Data List Price 856C/ AWD/ CASE/ STAGE 5 34,848 LB $355,146.00

-GR9E 04 C091 000 09-JUL-21






-GR9E 04



OPERATOR'S MANUAL




No Charge



No Charge



No Charge

MOLDBOARDS

SD_Z5405 MOLDBOARD


12' Moldboard

No Charge


10'9" Moldboard

$722.00


13' Moldboard

$539.00





$828.00






$713.00




No Charge

783130 MOLDBOARDSCAR783130


$4,090.00




-GR9E 04 C091 000 09-JUL-21






-GR9E 04

WHEELS AND TIRES


9430384 17.5 R25 XHA <2500M

Michelin

No Charge

9430357 17.5 R25 XTLA G2

Michelin

($699.00)


SD_02079 FUEL TANK




$925.00



783543 REAR CAMERA $1,671.00








$7,542.00




Heavy Duty

$4,514.00






tire inflate hose)

$285.00

SD_49029 PACKAGING




No Charge

-GR9E 04 C091 000 09-JUL-21






-GR9E 04




No Charge



Indicator

$4,930.00





No Charge




$8,011.00

SD_Z5601 REAR HOOK


783514 Rear Hook $229.00






CAB ACCESSORIES



783115 AM/FM Radio



audio Aux-in.

$300.00

MISCELLANEOUS



788506 WHEEL CHOCKS 788506 $202.00

LIGHTS




-GR9E 04 C091 000 09-JUL-21




CONSTRUCTION EQUIPMENT - Educational Services ...

Documents

Transcript of CONSTRUCTION EQUIPMENT - Educational Services ...