2017 - Hoover Truck and Bus Centers

1 1

Pricing good through October 31, 2017 SUMMER

2017

NEW

BOS1699500000

HPT 500 High Pressure Leak Tester• Produce a higher

volume of smoke for larger volume systems

• See page 36

AULMS908CV

Heavy Duty Diagnostic Scan Tool• Service type: Detroit Diesel, Allison,

Cummins, Hino, Wabco, Bendix and more!• 1 Year free software updates• 1 Year Warranty • See page 30

igh

ergher

smoke ume

KTI63194

22 Ton Air Hydraulic Truck Jack• 2 Year Warranty• Complies with ASME PASE/2014

Safety Standards• See page 73

AULMS908CV

eavy Duty Diagnostic Scan ToolService type: Detroit Diesel, Allison, Cummins, Hino, Wabco, Bendix and more!1 Year free software updates1 Year Warranty • See page 30

319431

Ton Air Toraulic Truck Jackr

Year WarrantyYemplies with ASME PASE/2014 mpfety Standardsfe

page 73

AU

He• Se

Cu• 1 • 1

$3,279.99

$3,995.00

$479.99

OMEHW93735AC

OMEHW93718C

OMEHW93300C

OMEHW93662C

OMEHW93657C

OMEHW93690COMEHW93735AC

OMEHW93662C

OMEHW93718C

OMEHW93657C OMEHW93690C

OMEHW93300C

HEAVY DUTY LIFTING PRODUCTS, 100% MADE IN THE USA FOR THE ULTIMATE IN STRENGTH AND DEPENDABILITY

2 YEAR MANUFACTURERS WARRANTY ALL PRODUCTS ARE FULLY ASME-PASE 2014 COMPLIANT

UNPARALLELED CUSTOMER SERVICE AFTER THE SALE

• 25 TON TRUCK JACK WITH 3’ ADAPTER

• 25 TON VEHICLE SUPPORT STANDS

• 10 TON AIR/HYDRAULIC SERVICE JACK

• 10 TON HEAVY DUTY JACK STANDS

• 1 TON FLOOR TRANSMISSION JACK

• FULLER TRANSMISSION ADAPTER

• 4 TON HYDRAULIC SERVICE JACK

• 6 TON VEHICLE STANDS

• 25 TON SHOP PRESS, 6" STROKE, W/ H-PUMP

• 25 TON SHOP PRESS ACCESSORIES KIT

• 10 TON AIR OPERATED END LIFT

• 10 TON HIGH REACH JACK STANDS

HE INWERNER -AUTOMOT IVE .COMSFA COMPANIES.

OMMEHHWWW99333777773333335555AAACCCOOMMEEHHWWW9993333337777333335555555AAAAAAACCCC OOMMEHWWWW99333333777111888CCCCCCOOMMEEHHWWWW933333333777711111188888CCCC OM HHWWW999999333333333000000000CCCOMMEEHHWWWW99333333333300000000000CCCC

4

IRT2593/4” Drive Air Impact Wrench• Delivers 1,050 ft-lb of maximum torque

in both forward and reverse• New Ergonomic design for easy two-handed operation• Two power settings in forward and reverse• Silenced exhaust reduces tool noise to only 91.6 dbA

while in use

IRT2145QIMAX3/4” Drive Composite Impact Wrench• 1350 ft-lb maximum reverse

torque from a tool thatweighs just 7.4 lbs and is compact enough to ac cess tight spaces

IRT2613/4” Drive Super Duty Air Impact Wrench• Jumbo hammer mechanism• Up to 1,100 ft./lbs. of torque• Trouble-free, longer performance aided

by the Pressure-Feed Lube System• Compact and only 8.8” long • Handle exhaust

IRT261-63/4” Drive Super Duty Air Impact Wrench with 6” Anvil

IRT2161XP3/4” Drive Ultra Duty Extra Performance Air Impact Wrench• Most powerful 3/4” impact in the industry• Maximum torque: 1,250 ft./lbs.• Full power reverse• 3 position power regulator• 360 degree swivel inlet

ACA1770-XL3/4” Super Duty Composite Impact Wrench• 1400 ft-lbs maximum torque• Ergonomically designed grip and

handle provides ultimate user comfort• 2 year warranty on material and

workmanship with POP

ACA1600-TH-A 3/4” Composite Impact• Upgrade to the 1600-TH• Increased power from 1400 to 1600 Max Torque• Patented Exhaust Technology - only 86 dBa• Patented Ergonomic Handle grip• Patented Forward/Reverse Switch• 2 year warranty

SUNSX43553/4” Drive Impact Wrench• 1400 ft./lbs. of quiet power• One hand forward/reverse• Quiet Tech™ exhaust system delivers 90 dBA• Weighs only 7.3 lbs.• Covered under a 2 year limited warranty

3/4” drive impact wrenches

$1,007.00

$732.75

$661.30

$496.89

$752.39

$449.99$449.99

$480.95

5

KDT881703/4” Drive Premium Air Impact Wrench• Max Breakaway Torque 1800 ft-lb• Impacting mechanism with Advanced

Triple Cycle Heat Treatment• One-hand push button Forward/Reverse;

preferred by technicians• Variable-speed trigger for precise control• Impacting Sound Level* - dB(A) 90.4• 2 year warranty

CPT772H3/4” Drive Super Duty Air Impact Wrench • Smoothest operating 3/4” impact

on the market with unmatched durability• 4 position power settings in forward and

ultimate power in reverse• Handle exhaust with 360 degree air inlet swivel

keeps air hose from being twisted and kinked

CPT772H-63/4” Drive Super Duty Air Impact Wrench with 6” Extended Anvil

CPT7763-63/4” Drive Heavy Duty Impact Wrench with 6” Anvil

CPT7763Heavy Duty High Power 3/4” Drive Air Impact Wrench• 1200 ft./lbs. of torque• Weighs less than 12 lbs.• 6 vane motor for speed

- power with any 1/2” hose air supply

MTN72453/4” Drive Composite Impact Wrench• Maximum Torque is 1150 ft./lbs. in

forward and 1200 ft./lbs. in reverse• Lightweight at only 7.65 lbs• 1 year warranty on material & workmanship

3/4” drive impact wrenches

$579.99

$594.85

$648.49$599.99

$553.39

$499.99

ACA1900A 1” Impact with 8” Anvil. 1900 ft / lbs torque• New durable Pinless Hammer mechanism• Rubber insert on side handle and trigger for user comfort• 1900 ft /lbs torque. 5500 RPM. 1600 blows per minute• Rubber mold over front nose and aluminum housing• Swivel air inlet and 9 position power management on F/R switch

ACA1880-P-A 1” Pistol Style Impact Wrench• 1900 ft-lbs of Torque• Patented AIRCAT Grip for Comfort• 2 Year Warranty• Molded-On Rubber that Protects Tool Housing• Low Noise Level only 88 dBa

IRT2711” Drive Super Duty Air Impact Wrench• Impressive power-to-size ratio• Up to 1,100 ft./lbs. of torque• Pressure-feed lube system for longer service life• Dead handle improves operator control• Free-speed 5,500 RPM

IRT295A1” Drive Heavy Duty Air Impactool™• Delivers 1,770 ft./lbs. maximum torque at

120 PSI with 5,250 rpm free speed and a high efficiency 6 vane motor

• Fast torque delivers 1,000 ft./lbs. in 2 seconds• Handle exhaust directs air away from the work• Top mounted dead handle provides

great leverage for difficult underbody work• 3 position power regulator provides torque

management

IRT2155QIMAXAir Impact Wrench 1” Drive 2000Ft-Lb• 1350 ft-lb (1830Nm) maximum

reverse torque from a tool that weighs just 7.4lbs (3.36kg) and is compact enough to access tight places

1” drive impact wrenches

KTI817951” Drive Air Impact Wrench with 13 Piece SAE Socket Set• 1500 ft./lb. ultimate torque• 3500 rpm• 8 cfm air consumption• 90 PSI air pressure (recommended)

KTI’s air tools are designed for reliability and superior performance. Includes 13-piece 1” drive short fractional impact socket set including sizes 3/4” to 3” (KTI-35113).

$679.99

$652.70

$757.00

$834.59

$785.64

$767.35

7

CPT7778-61” Drive Impact Wrench with 6” Anvil• 1,450 ft-lbs. torque provides power to loosen rusted bolts• High performance clutch provides longer life under tough conditions• High efficiency 6 vane motor for maximum performance• Bottom exhaust directs exhaust away from the operator• Three position power regulator with directional control

CPT7782-61” Drive Heavy Duty Impact Wrench with Extended Anvil• 2,140 ft.lbs - of maximum torque in reverse• Regulator with integrated forward/reverse with 3-position power settings

in both directions

CPT77731” Drive Heavy Duty Impact Wrench • 1,200 ft/lbs of ultimate torque providing power

to loosen the toughest fastener• Twin Hammer high performance clutch

for longer life under tough conditions• Efficient 6 Vane Motor - power with

any 1/2” hose air supply• 3 Position regulator and directional control - one

lever for all controls with three positions in forward and full power reverse

CPT8941” Drive Heavy Duty Air Impact Wrench• Oil bath clutch for smooth operation

and extended durability• One hand push button forward/reverse power

regulator - 3 positive power settings in forward and ultimate power in reverse

• Maximum torque: 1,700 ft./lbs.• Adjustable side handle for support• Ideal for spring work, tractor

pad removal and off road equipment

CPT7780-61” Drive Lightweight Impact Wrench with 6” Extension• EXTRA LIGHT: 17 Lbs. - less fatigue thanks to an aluminum housing• POWERFUL: 1700 ft.lbs of maximum torque in reverse• USEFUL: 4 positions power setting in both directions and on both sides of the tool• VERSATILE: Socket retainer ring combined with hole retainer• PRECISE CONTROL: Double stage trigger, inside for safe operation in tight areas

CPT7782-SP61” Drive Heavy Duty Impact Wrench with 6” Extension and #5 Spline• 2,140 ft.lbs - of maximum torque in reverse• Pinless closed reinforced rocking dog impact mechanism• Socket retainer ring combined with hole retainer• Full teasing trigger• Regulator with integrated forward/reverse

with 3-position power settings in both directions

CPT7971” Drive Super Duty Impact Wrench• Truck tire tool of choice• Long known as the workhorse of the truck tire industry• Rocking dog clutch for smooth operation and extreme durability• Choice of professional mechanics for high volume tire work on

trucks, buses and heavy equipment

CPT797-61” Drive Super Duty Impact Wrench with 6” Anvil


$1,379.00

$799.99

$602.19

$773.17

$871.99

$869.99

$1,187.00

$1,187.00

8

IRT285B1” Drive Heavy Duty Impact Wrench• High efficiency, 6 vane air motor• 1,450 ft./lbs of maximum torque with a 5,000 rpm free speed• 3 position power regulator• Includes protective boot kit

IRT285B-61” Drive Heavy Duty Air Impact Wrench WITH 6” ANVIL• Maximum torque: 1,770 ft./lbs.• New Fast-Torque feature delivers 1,000 ft./lbs. in 2 seconds• New increased pressure rating can withstand 120 PSI for better durability• Improved feather-touch trigger• Free chemical resistant protective boot helps prevent damage

IRT2190TI-6 1” Drive Titanium Impact Wrench with 6” Extended Anvil• Perfect for applications where high-quality is essential• Reduced vibration • Maximum torque: 1,600 ft./lbs.• Free speed: 6,800 RPM• Extended robust anvil bushing provides long life

under heavy shop usage

IRT2190TI1” Drive Titanium Impact Wrench• Perfect for applications where high-quality is essential• Reduced vibration• Maximum torque: 1,600 ft./lbs.• Free speed: 6,800 RPM

Working torque: 150-1,200 ft./lbs.; Average air consumption: 12 CFM; Air inlet size: 1/2”; sound dBA: 103.0/117.0; minimum hose size: 1/2”; weight: 13.5 lb.; length: 21.5.

SUNSX556-61” Drive Impact Wrench with 6” Extended Anvil• 1,600 ft.lbs. of torque• Only 24.5 lbs of weight, lightest in its class• Lower vibration and long last operation• Three forward and three reverse speeds


IRT118MAXKLong Barrel Air Hammer Kit - Low Vibration• MAX Comfort: Anti-

vibration feature reduces vibration by 30% over standard air hammers

• MAX Power: 15% increase in impact force over standard air hammer product offering

• MAX Productivity: Quick-change retainer allows for faster chisel changeovers

• 2,500 blows per minute• Quick change retainer,

(5) chisels and carry case included

In keeping with the tradition of the Ingersoll Rand MAX tools, the 118MAXK Air Hammers is the best in its class.

IRT125Standard Duty Needle Scaler• 19 needles• Each needle: 1/8” (3.2mm)• 4,600 blows per minute

at free speed

air hammer & needle scalers

$839.99

$711.35

$1,099.00

$1,099.00

$522.05

$204.35

$236.89

9

IRTC2340L5

IRTC475N7.5FP

IRTC2475N7.5

IRT45465820

IRT2475F14G

IRT2475F13GH

AIR COMPRESSORS AND SYSTEM COMPONENTS

Ingersoll Rand IRT231CP

impact & start up kit*

IRTC2545E10FP

IRTC2475N7.5FP

CALL FOR PRICE

CALL FOR PRICE

V-style cast-iron pump for e<cient operation and easy serviceability

More then 15,000 hours of durability at 100% duty cycle

Model HP Tank SizeCFM @ 175 psig

IRTC2340L5 5 60 14.7

IRTC2475N7.5FP 7.5 80 24

IRTC2475N7.5 7.5 80 24

IRT45465820 10 120 35

IRT2475F14G* 14 30 24

IRT2475F13GH* 13 30 25

*with purchase of qualifying air compressor

*gas-powered

FOLLOW US. #IRTOOLS

LEARN MORE AT

IRTOOLS.COM

10

MLW2763-22M18™ FUEL™ 1/2” Drive High Torque Impact Wrench with Friction Ring Kit• Powered by FUEL™ technology, the MLW2763-22 delivers a best-in-class 700 ft-lbs. of

Max Fastening Torque and 1,100 ft-lbs of Nut-Busting Torque• Proprietary 2-Mode Drive-Control™ which allows users to electronically cycle between

two different fastening modes

Kit includes impact wrench, (2) XC5.0 battery packs, M12 and M18 multi-voltage charger and carrying case. The 1/2” Friction Ring anvil allows tradesmen to make quick and tool-free socket changes. The M18 FUEL™ High Torque Impact Wrench outperforms all competitors and offers professional tradesmen new levels of performance, run-time, and durability. Traditionally, users facing repetitive high torque fastening applications have needed to resort to corded or pneumatic impact wrenches due to run-time and power challenges. The combination of a POWERSTATE™ Brushless Motor, REDLINK PLUS™ Intelligence, REDLITHIUM™ XC 5.0 Battery Pack, and an optimized impact mechanism results in tools that outclass all cordless, corded, and even pneumatic competitors.

MLW2764-22M18™ FUEL™ 3/4” High Torque Impact Wrench Kit• Superior performance: Delivers up to 750 ft-lbs of

maximum fastening torque, up to 1,200 ft-lbs of nut-busting torque and up to 2X more runtime

• POWERSTATE™ Brushless Motor: Outpowers competitors yet runs cooler with no wearable components

• REDLINK PLUS™ Intelligence: allows the operator to choose between 2 fastening modes with Milwaukee’s proprietary

• DRIVE CONTROL™ feature. Mode 1 delivers up to 375 ft-lbs of maximum fastening torque, and Mode 2 up to 750 ft-lbs maximum fastening torque

• REDLITHIUM™ XC 4.0 Battery Pack: Provides superior pack construction, electronics and performance to deliver 2X more runtime

• ¾” Anvil with friction ring for fast, easy socket changes

MLW2896-23M18 FUEL™ Cordless Lithium-Ion 3 Tool Combo Kit• The M18 FUEL™ 1/2” High Torque Impact Wrench delivers up to

700 ft-lbs of maximum fastening torque, up to 1,100 ft-lbs of nut-busting torque and up to 2X more runtime (2763-20)

• The M18 FUEL™ 3/8” Compact Impact Wrench is the most powerful tool in its class by delivering up to 210 ft-lbs of torque in a compact design (2754-20)

• The Milwaukee® M18™ Cordless LED Work Light lasts 600X longer than conventional incandescent bulbs (2735-20)

• (2) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack provides twice the run time

$611.99

$686.07

$828.99

11

MLW2861-22M18™ FUEL 1/2” Mid-Torque Impact Wrench Kit• Delivers up to 450ft-lbs of fastening torque• Delivers up to 600ft-lbs of nut-busting torque• Compact length at 6.7” to allow for more access in tight spaces• Lightweight tool at 5.3lbs w/ 5.0Ah battery for less fatigue• Improved rubber overmold to withstand corrosive materials

This tool offers quick, tool-free socket changes with a 1/2” friction ring anvil. A new overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

MAKXWT08M18V LXT Lithium-Ion 1/2” Drive Brushless Impact Wrench Kit• L.E.D. Light• BL™ Motor delivers 1,180 ft.lbs of breakaway torque• 3-speed power selection switch (0-900/ 0-1,000/ 0-1,800 RPM & 0-1,800/ 0-2,000/

0-2,200 IPM) provides precise fastening control for a wide range of applications• Weighs only 7.9 lbs. with battery for reduced operator fatigue• Efficient BL™ Brushless motor is electronically controlled to optimize

battery energy use for up to 50% longer run time per charge• POWER - BL™ Motor delivers 1,180 ft.lbs of breakaway torque

and 740 ft.lbs. of Max Torque• SPEED - 3-speed power selection switch (0-900/ 0-1,000/ 0-1,800 RPM)

provides precise fastening control• DURABILITY - Brushless Motor eliminates carbon brushes, enabling

the motor to run cooler and more efficiently• COMFORT - Weighs only 7.9 lbs. with battery for reduced operator INCLUDES

- Includes - (2) 18V LXT® Lithium-Ion batteries, rapid charger and tool bag

IRTW7150-K2IQv20 Li-Ion 1/2” Drive Impact Wrench Kit with Charger and Two Batteries• POWER – An industry leading 1,100 ft/lbs of Nut Busting Torque from a tool weighing only 6.8 lbs

• DURABILITY – High power Lithium-Ion battery with all-metal drive train and reinforced housing

• COMFORT – Optimized balance combined with ergonomic handle and rubber over-molded grip

• Includes (2) 20v Lithium-Ion batteries and battery charger featuring an auxiliary USB port and carry case

• Backed up by Ingersoll Rand’s industry leading 1-2-3 Warranty

Only Ingersoll Rand could create a cordless impact wrench that matches the power of its industry leading air tool. Powered by a new high power Lithium-Ion battery, the W7150 delivers 1,100 ft/lbs. of Nut Busting Torque. Durability is built into the design with an all-metal drive train and a reinforced housing that will stand up to the toughest jobs. Comfort is optimized with an ergonomic handle and rubber grip feature. The high capacity battery charger delivers charges in less than an hour and has a built -in USB port. All backed by IR’s industry leading 1-2-3 IQv Warranty.

IRTW7150-K1IQv20 Li-Ion 1/2” Drive Impact Wrench Kit with Charger and One Battery

$586.46

$589.99

$665.39

$534.99

12

29 Piece 3/4” Drive SAE Impact Socket Set • Packaged in a molded storage caseSet contains: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 1-15/16”, 2”, 2-1/16”, 2-1/8”, 2-3/16”, 2-1/4”, 2-5/16, 2-3/8”, 2-7/16”, and 2-1/2”

GRE8029D - DeepGRE8029 - Standard

14 Piece 3/4” Drive SAE Impact Socket Set• Packaged in a molded storage caseSet contains: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2 and 1-5/8”


8 Piece 3/4” Drive Metric Impact Socket Set• Packaged in a molded storage caseSet contains: 26mm, 27mm, 29mm, 30mm, 32mm, 35mm, 36mm and 38mm

GRE8134MD - DeepGRE8134M - Standard

26 Piece 3/4” Drive Metric Impact Socket Set -Standard• Packaged in a metal caseSet contains: 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm, 35mm, 36mm, 38mm, 40mm, 41mm, 42mm, 43mm, 44mm, 46mm, 50mm

GRE8026MD - DeepGRE8026M - Standard

KTI3910015 Piece 3/4” Drive 6 Point Thin-Wall Short Metric Impact Socket Set• Packaged in a convenient blow-molded case• Lifetime warranty

Set includes: 17mm - 46mm

17 Piece 3/4” Drive 6 Point Deep Impact Socket Sets• Included in a heavy-duty blow mold case

SUN4685 - SAESet contains: 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 1-15/16” and 2”

SUN4686 - MetricSet contains: 26mm, 27mm, 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 35mm, 36mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm and 44mm

17 Piece 3/4” Drive 6 Point Heavy Duty Impact Socket Sets• Industrial strength, double latch blow molded case

SUN4683 - SAESet contains: 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 1-15/16” and 2”

SUN4684 - MetricSet contains: 26mm, 27mm, 28mm, 29mm, 30mm, 32mm, 33mm, 35mm, 35mm, 38mm, 40mm, 41mm, 42mm, 43mm, 44mm, 45mm and 46mm

LIFETIMEWARRANTY

LIFETIMEWARRANTY

5 Piece 3/4” Drive Hex Impact Socket Sets• Included in a heavy-duty blow mold case

SUN4506 - SAESet contains: 3/4”, 7/8”, 1”, 1-1/8” and 1-1/4”

SUN4507 - MetricSet contains: 14mm, 17mm, 19mm, 22mm and 24mm

LIFETIMEWARRANTY

• Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability

• Radius corner design - to extend the life of fasteners

• Manufactured from heat-treated chrome-moly steel for wear in professional, rugged environments

• Laser engraved for quick identification

29 Piece 3/4” Drive 6 Point SAE Impact Socket Sets• Includes heavy duty blow molded case - over 30” tall• Includes wheel kit and grip handle for easy maneuveringSet contains: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 1-15/16”, 2”, 2-1/16”, 2-1/8”, 2-3/16”, 2-1/4”, 2-5/16”, 2-3/8”, 2-7/16” and 2-1/2”

SUN4696 - StandardSUN4695 - Deep (Freight Delivery)

• Made of high quality steel (chrome-molybdenum)• Engineered specifically for use with impact tools, using the most up to date

industrial specifications• Made to transfer the pressure from the thinnest part of the socket wall toward

the thicker section, resulting in increased strength • Lifetime Warranty

3/4” drive

$78.15$133.45

$309.85$467.45

$520.69

$387.39

$305.25

$520.69

$106.15

$99.07

$569.00$759.00

$130.15$184.95

$258.81

$661.69$774.37

13

21 Piece 1” Drive 6 Point SAE Impact Socket Sets• Forged from the finest chrome molybdenum alloy steel

– the best choice for strength and durability• Included in a heavy-duty blow mold case - over 30” tall• Includes wheel kit and grip handle for easy maneuvering• Fully guaranteedSet contains: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8’, 1-15/16” and 2”

SUN5692 - Standard

SUN5693 - Deep

SUN5607 - Metric

6 Piece 1” Drive Impact Hex Driver Set• Forged from the finest chrome molybdenum

alloy steel – the best choice for strength

and durability

• Included in a heavy-duty blow mold case

Set contains: 14mm, 17mm, 19mm, 22mm, 24mm and 27mm

16 Piece 1” Drive SAE Impact Socket Set • Packaged in a metal caseSet contains: 2-1/16”, 2-1/8”, 2-3/16”, 2-1/4”, 2-5/16, 2-3/8”, 2-7/16”, 2-1/2”, 2-9/16”, 2-5/8”, 2-11/16”, 2-3/4”, 2-13/16”, 2-7/8”, 2-15/16” and 3”

GRE9016D - Deep (Freight Delivery)GRE9016 - Standard

GRE9096H1” Drive 6 Piece Hex Driver Set• Set contains one piece impact hex drivers• Includes 6 pieces in sizes 3/4” to 1-3/8”• Made from high quality chrome-molybdenum steel• Heat treated for strength and durability

21 Piece 1” Drive SAE Impact Socket Set • Packaged in a metal caseSet contains: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 1-15/16” and 2”


GRE9121D 21 Piece 1” Deep Drive SAE Impact Socket Set - 12 Point• Packaged in a metal caseSet contains: 3/4”, 13/16”, 7/8”, 15/16”, 1’’, 1-1/16’’, 1-1/8’’, 1-3/16’’, 1-1/4’’, 1-5/16’’, 1-3/8’’, 1-7/16’’, 1-1/2’’, 1-9/16’’, 1-5/8’’, 1-11/16’’, 1-3/4’’, 1-13/16’’, 1-7/8’’, 1-15/16’’ and 2’’

• Made of high quality steel (chrome-molybdenum); thorough and exact heat treatment insures the correct balance of strength and durability

• Engineered specifically for use with impact tools, using the most up to date industrial specifications

• Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength

• Lifetime Warranty

No doubt, Sunex Tools offer one of the most complete and toughest Impact Socket lines around. These 1” drive impact socket sets are designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener.

SUN561616 Piece 1” Drive Deep SAE Impact Socket Set• Forged from CR-MO alloy steel for maximum durability• Radius corners on square drive reduces wear on socket and impact tool over time• All Sunex® impact sockets meet or exceed ASME specifications• Lifetime warranty

1” Impact Socket Set with lifetime warranty. The sockets are forged from CR-MO allow steel for maximum durability.

LIFETIMEWARRANTY

LIFETIMEWARRANTY

1” drive

$764.85$1,119.00

$390.25$561.09

$925.99

$169.49

$436.50$677.49

$899.98

$289.45

14

GRE803211 Piece 3/4” Drive Truck Wheel Service Set• Packaged in a metal case

Set contains: Deep: 3/4”, 13/16”, 7/8”, 1”, 1-3/16”; Thin Wall Deep: 1-1/16”, 1-1/8”, 1-1/4”; Metric Deep: 33mm; Deep Length Budd: 1-1/2”; 4-Point Square: 13/16”

SUN4011M11 Piece 3/4” Drive Deep Metric Truck Impact Socket Set• Comes in an industrial strength,

double latch blow mold case

Set includes: 8 deep sockets: 27mm, 30mm, 32mm, 33mm, 35mm, 36mm, 38mm, 41mm; 3 Square Sockets: 17mm, 20mm, 21mm.

SUN426S

3/4” Drive Square Impact Socket 13/16”• Forged from the finest chrome molybdenum alloy steel

– the best choice for strength and durability• Radius corner design - to extend the life of fasteners• The design drives the side of the fastener instead of the corner• Provides increased strength, but also avoids rounding of rusted

or damaged fasteners

SUN468211 Piece 3/4” Drive Truck Service Impact Socket Set• Comes in an industrial strength, double latch blow molded case

Set contains: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-1/2” standard sockets and a 13/16’ square socket

LIFETIMEWARRANTY

SUN46677 Piece 3/4” Drive Truck Pinion Locknut Impact Socket Set• For removing or installing transmission and

differential end yoke lock nuts on most trucks

Set includes: 2”, 2-1/8”, 2-1/4”, 2-3/8”, 2-1/2”, 2-5/8” and 2-3/4”.

LIFETIMEWARRANTY

SUN56855 Piece 1” Drive 6 Point SAE and Metric Wheel Service Impact Socket Set• Included in an industrial strength,

double latch blow mold caseSet contains: 2 deep sockets 1-1/2” and 33mm; 2 deep thin wall sockets 1-1/8” and 1-1/4”; 1 square socket 13/16”.

SUN5690A10 Piece 1” Drive SAE / Metric Heavy Duty Wheel Impact Socket Set• Comes standard with blow molded case Set contains: Deep-33mm, 1”, 1-3/16”,1-3/4”; Thin wall deep-1-1/16”, 1-1/8”, 1-1/4”; Square-13/16”, 15/16”; Controlled depth-1-1/2”.

LIFETIMEWARRANTY

GRE90077 Piece 1” Drive Truck Wheel Set• Packaged in a molded storage caseSet contains: Standard 4 Point Square: 13/16”; Standard: 1-3/16”; Thin Wall Deep: 1-1/16”, 1-1/8”, 1-1/4”; Metric Deep: 33mm

GRE915310 Piece 1” Drive Wheel Service Set• Packaged in a molded storage caseSet contains: 6-Point sizes include: 1-1/16’, 1-1/8’ and 1-1/4’ Thin Wall Deep; 1-1/2’ Deep Budd; 33mm, 35mm and 41mm Deep. 4-Point sizes include: 13/16’, 17mm and 21mm square

• Made of high quality alloy steel (chrome-molybdenum)

• Tested to the highest specifications to deliver outstanding performance at the competitive cost

• Lifetime Warranty



• Made of high quality alloy steel (chrome-molybdenum)• Tested to the highest specifications to deliver outstanding performance at the competitive cost• Lifetime Warranty



LIFETIMEWARRANTY

LIFETIMEWARRANTY

1” drive (wheel service)

3/4” drive (wheel service)

$194.29

$440.30

$112.27

$179.21

$14.19

$119.40 $260.36

$158.35

$230.09

15

SUN43043/4” Drive Universal Joint

SUN43053/4” Drive 3/4” Female x 1/2” Male Adapter• Re-engineered to dramatically increase

durability - virtually unbreakable

SUN43003/4” Female to 1” Male Impact Socket Adapter

SUN53031” Drive 1” Female x 3/4” Male Impact Socket Adapter

SUN53041” Drive Universal Joint

1” Drive Adapters• Re-engineered to dramatically increase durability• Virtually unbreakable

SUN5305 - 1” Female x 3/4” Male

LIFETIMEWARRANTY

KTI340503/4” Drive Impact Universal Joint • Ball/swivel action universal joints

give sockets access to tight areas

KTI34016 3/4” Female 1/2” Male Impact Socket Adapter

KTI340323/4” Female 1” Male Impact Socket Adapter

KTI350241” Female 3/4” Male Impact Socket Adapter

KTI340263/4” Drive Deep Budd Wheel Impact Socket, 13/16” Square Designed for outer cap nuts on Budd style truck wheels

KTI340273/4” Drive Deep Budd Wheel Impact Socket, 13/16” Square x 1-1/2” Hex Designed for outer cap nuts on Budd style truck wheels. For most American-made trucks with dual rear wheels.

1” Drive 6 Point Impact Budd Wheel SocketsKTI35233 - 33mm Deep KTI35026 - 13/16” ShallowKTI35027 - 13/16” Square and 1-1/2” Hex LimitedKTI35028 - 13/16” Square and 1-1/2” Hex

KTI392333/4” Drive 6 Point Deep Impact Budd Wheel Socket, 33mmDesigned for outer cap nuts on Budd style truck wheels.

KTI350055 Piece 1” Drive Budd Wheel Service Kit• Metric sizes for Isuzu, Hino, Mitsubishi,

Fuso, White Volvo, Mack Midliner and other imports

• Fractional size for all U.S.A. made trucks• Fits both front and rear axle wheel,

single and dual

Set includes 33mm, 36mm, 38mm, 41mm and 1-1/2” hex.

3/4” Drive Combination Budd Wheel Impact SocketsSUN4826C - 1-1/2” x 13/16”

SUN4121C - 41mm x 21mm

SUN56265 Piece 1” Drive Combination Budd Wheel Impact Socket Set

Set contains: 4 Square Budd Wheel Sockets: 1-1/2” x 13/16”, 35mm x 17mm, 38mm x 20mm, 41mm x 21mm and 1 Deep Socket: 33mm

1” Drive Combination Budd Wheel Impact SocketsSUN54121 - 41mm x 21mm

SUN5826C - 1-1/2” x 13/16”

1” Drive Budd Wheel Sockets• Their extra deep design lets you remove

both nut and stud with just the one socket

OTC1947A – 41 mm Hex Socket

OTC1948A – 33 mm Hex SocketMetric sizes for Isuzu, Hino, Mitsubishi Fuso, and import trucks; fit front and rear axle wheels.

OTC1949A – 1-1/2” Hex SocketFor American-made trucks with dual rear wheels.

LIFETIMEWARRANTY



• The design drives the side of the fastener instead of the corner

• Provides increased strength, but also avoids rounding of rusted or damaged fasteners

Manufactured from heat-treated chrome-moly steel for wear in professional, rugged environments.

impact sockets accessories

budd wheel impact service

$34.45$35.59

$28.75$38.05

$28.20$23.28

$46.50

$46.50$46.50

$43.42

$33.86

$28.66

$20.95

$37.12

$146.02

$183.45

$52.55

$63.40

$21.69

$24.17

$23.80

$52.94

$21.29

$28.20

$17.40$33.77

16

Ratcheting Chain Wrenches• Head design permits turning in either direction

without removing wrench from the work• Ratcheting action also makes it possible to re-grip without removal• Handles parts of most any shape, round, square, hexagon, octagon

OTC7401• 19” handle with capacity from 3” to 6-3/4” O.D.• Weight: 5lbs., 3oz.

OTC7400• 13” handle with capacity from 1/2” to 4-3/4” O.D.• Weight: 2lbs., 5oz.

CRSCW24Crescent 24” Chain Wrench• Double action allows use in either direction• Designed for confined areas when ordinary pipe wrenches will not fit• Excellent for pipe fittings• Concave cut teeth for improved gripping; easily resharpened if needed• Chrome plated to resist rust

EZRMR1X1” Drive Extendable Ratchet• Heavy duty• 1” drive• Extends from

25 inches to 40 inches• Full chrome

with knurled grip• Reversible switch

wrenches

V8T8199 Piece Jumbo Angle Head Open End Wrench Set• 30° and 60° angles allow use of wrenches in 4 different positions• Made of drop-forged alloy-steel, and comes in a canvas pouch.• Includes sizes: 24mm to 32mm.

V8 Tools Angle Head Combination Wrench Sets• Drop forged alloy steel • Fully polished• Lifetime warranty

Fractional Service Wrench Sets• Thin jaws with a short handles • Drop forged alloy steel• Fully polished • Include storage pouches• Popular for trucking, auto mechanics and industrial market

V8T9212 - 12 Piece Jumbo, 1-11/16 to 2-5/8”

V8T9215 - 15 Piece, 3/4” to 1-5/8” (Freight Delivery)

Raised Panel Jumbo Combination Wrench Sets• Made of drop forged steel, chrome plated and heat-

treated to achieve maximum wear• Raised panel provides additional strength

and durability• Jumbo wrenches are designed specifically to meet the

needs of the professional who services heavy duty trucks and commercial equipment

Metric Combination Wrench Sets• High polish, smooth finish • Heat treated chrome vanadium steel • Length allows access to hard to reach places • Laser engraved for easy identification • Packaged in a kit bag

KTI41801 - 9 Piece Sizes include: 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm and 28mm

KTI41802 - 8 Piece Sizes include: 29mm, 30mm, 31mm, 32mm, 33mm, 34mm, 35mm and 36mm

KTI41006 - 6 Piece Includes sizes: 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8” and 2”

KTI41004 - 4 Piece Includes sizes: 2-1/8”, 2-1/4”, 2-3/8” and 2-1/2”

EZRMR343/4” Drive Extendable Ratchet• Telescopes from

24” to 39-3/4” • Quick-release drive head • Lifetime Warranty

$123.39

$50.79

$65.05

$228.45

$107.27

$174.87$151.85

$213.57

$169.99

$122.80

$307.07

$128.85

17

SUNEX Crowfoot Wrench Sets• Fully polished drop forged alloy steel• Reusable blow molded storage tray

Basic doesn’t have to be ordinary. Bringing you an exciting range of resources, Sunex hand tools put a new spin on handling fasteners. With the design and strength to work in most any situation, these tools will be right with you all of the way. There’s no sacrifice, you have strength and comfort!

SUN9720 - 7 Piece • Set includes: 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-3/8, 1-1/2”

SUN9722 - 6 Piece• Set includes: 1-5/8, 1-3/4, 1-7/8, 2, 2-1/8, 2-1/4”

SUN97407 Piece Jumbo Metric Straight Crowfoot Wrench Set• Fully polished drop forged alloy steel• Mounted on storage rail for convenience• Also available individually• Set includes: 34mm, 35mm, 36mm, 38mm, 41mm, 42mm and 46mm

SUN99166 Piece Jumbo Angle Head Wrench Set• High density drop forged alloy steel for strength• Raised panel design• 15 degree and 60 degree angled ends for easy access• Wrenches guaranteed and available as set or individually• Comes with convenient metal clips for storage

Set includes: 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8” and 2”

SUN96044 Piece Raised Panel SAE Combination Wrench Set• High density, dropped forged steel for strength and comfort• Raised panel design • Comes with sturdy metal clip for storage• Wrenches guaranteed • Available individually

Set includes: 2-1/8”, 2-1/4”, 2-3/8”, and 2-1/2”

Metric Jumbo Angle Head Wrench Sets• Canvas pouch included• Fully polished drop forged alloy steel• 15 degree and 60 degree angled ends for easy access• Wrenches are fully guaranteed• Available as set or individually

SUN9926 - 6 Piece Set includes: 20mm, 21mm, 22mm, 23mm, 24mm and 25mm

SUN9927 - 7 Piece Set includes: 26mm, 27mm, 28mm, 29mm, 30mm, 31mm, and 32mm

SUN99376 Pc. Super Jumbo Ratcheting Wrench Set• Geartech® deep tooth design for increased torque over standard ratchet wrenches• Specialty Heat Treated Chrome Vanadium Steel allows for a smaller ratchet head

design for tight areas where conventional tools will not reach• 72 tooth design for a 5º swing per tooth vs. standard 30º for standard ratchet

wrenches• Includes durable canvas pouch for convenient storage and easy travel• Jumbo Ratcheting Wrenches are also available to purchase separately

wrenches

$75.47

$101.09

$80.45

$284.35

$156.09

$55.57

$95.30

$384.84

18

AST213421 Piece 3/4” Square Drive Socket Set• Made of plated Chrome Molybdenum industrial drop forged, heat treated 45 steel• Comes in a plastic blow molded case

Includes: (1) reversible ratchet, (1) flexible bar: 20”., (2) extension bars: 4” & 8”, (1) metal case, (16) sockets 3/4” dr., 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”, 1-3/4”, 1-13/16”, 1-7/8” & 2”

KTI2412120 Piece 3/4” Drive 6 Point SAE Socket Set• 6-point high polished chrome

vanadium steel• Packaged in blow-molded caseIncludes: 16 sockets from 3/4” to 2”, ratchet, T-handle and 4” and 8” extensions. Lifetime warranty.

KDT82303 5 Piece Hammer Set• Highest quality forged alloy heads• Ergonomic comfort grip• Packaged in a durable storage tray• Lifetime warranty

Set includes: 16 oz. ball pein, 3 lb. drilling, 12 oz. soft face, 16 oz. dead blow, and 16 oz. rubber mallet

BASH Sledge Hammers• Unbreakable Handle Technology and steel core design • Safety plate locks head firmly to handle

eliminating head dislodging• Non-slip grip textured handle and Lanyard hole

to safely secure sledge to your wrist

WIL20836 - 8 lb. Head, 36”

WIL21236 - 12 lb. Head, 36”

MLK609400-46035 Piece Universal Press and Pull Sleeve Kit with XL C-Clamp with Vibro Impact Spindle• Sleeves inner diameter from 34 - 72 mm• Universal tool for extracting and

mounting the following: silent bearings, hydraulic bearings, ball bearings, rubber bearings, shift seals, bearing bushes, etc

• Complementary universal base frame (for direct use on car) and other sizes sleeves and spindles available separately

• Can also be used with 12 ton hydraulic spindle and baseframe (mueller 609 312, not included in offer) or Impact wrench for greater application of force

• Includes Vibro impact spindle TR20K with ball bearing. To be used with Mueller Press and Pull Kit 609 400

MLK609390XS Press and Pull Sleeve Kit• Universal tool set for extracting and mounting:

silent bearings, hydraulic bearings, ball bearings, rubber bearings, shaft seals, bearing bushes, etc.

• Includes 10 sleeves, 3 spindles, and 4 discs• Sleeves are smaller in size and stackable• Universal application makes it ideal for a wide

range of vehicles• Can be used in combination with the Press And

Pull Sleeve Kit (609400)

MLK60942036 Piece Universal Press and Pull Sleeve Kit• Universal tool set for removing and installing

all types of bushings, bearings, and seals• Includes sleeves are large enough to fit most

heavy duty applications• Universally suitable for mainly SUV, vans and

commercial vehicles• Sleeves are not hardened (only step discs

are) and thus can be modified with e.g. file to individual requirements

chrome socket sets

press & pull sleeve kits

hammers

$115.43

$229.99

$142.55$188.00

$121.59

$983.99

$559.99

$1,389.00

19

KTI24090 3/4” Dr. Standard Ratchet

KTI24092 3/4” Dr. Heavy Duty Pro Ratchet

KTI240503/4” Female to 1/2” Male Socket Adapter• Heat treated for wear and resistance• Made of chrome vanadium • Laser engraved• Rugged style • Economically priced• Lifetime Warranty

3/4” Drive Socket Extensions• Extension attaches to ratchet or other drive tool allowing easier access to tight spaces• Features high polish chrome finish and ball detent to fasten the socket to the handle without slippage• Manufactured with heat-treated chrome vanadium steel

KTI24004 - 4”

KTI24008 - 8”

KTI24016 - 16”

TIT120483/4” Drive 40” Non-Ratcheting Breaker Bar• Maximum torque:1000 ft./lbs. (138kg/m)• Lifetime Warranty

KTI240803/4” Breaker Bar • Length: 20”

KTI240703/4” Drive Sliding T-Handle Socket

CHA480 20-1/4” Tongue and Groove Pliers• SAFE-T-STOP prevents finger pinch• Permalock® fastener eliminates nut and bolt failure• Reinforcing edge minimizes stress breakage• Right angle, laser heat treated teeth grip better and last longer

MAY4016048” Dominator® Pry Bar• The Blade is heat-treated the entire length• The handle is ergonomically designed to

provide a more comfortable and secure grip• Curved blade style gives extra leverage• Length: 48”

MAY4013942” Dominator® with Curved End Pry Bar • 5/8 square steel, the largest yet for the Dominators,

hardened and tempered the entire length• Patented capped-end handle allows the

user to strike the bar without damaging the handle• Two-composite handle designed for user comfort and reduced hand fatigue

MAY4016258” Dominator® Pry Bar• Length: 58”

Jimmy Bars• Forged from chrome alloy steeland

heat-treated to resist bending and breaking

OTC7420 7/8” dia. 46” long

OTC7421 1” dia. 54” long

$87.99

$71.50

$8.77

$107.12

$14.52$19.28$29.62

$28.95

$46.99

$67.99

$105.90

$115.35

$78.45

$92.89$77.15

20

MTN166003/4” Drive Torque Wrench - 100-600 ft/lbs• Click style torque wrench with PRO Ratchet Head• Micrometer style clicks and/or releases when preset torque is reached• Hardened steel body with knurled handles • Metric and english settings • 1 year warranty on material & workmanship

FOW74-150-050-0EZ-Drum Reach Electronic Brake Drum Gage• Dust, water and oil resistant• Inch/metric/fraction conversion• 4” drum preset (101.60mm)• Resolution: 0.0005”/.01mm/fractions in 1/64th” increments• RS232 output for direct computer connection

FOW72-482-040-036 Piece Xtra-Punch Set• 1/2” -1” range in 1/64” steps• Heavy duty for larger applications• Punch tips are hardened 48-55 HRC• Master punches are 4 7/8” in length

and sleeves are 1” in length• 36 pc set, 3 master punches and 33

individually sized sleeves

KTI72190Torque Multiplier• Input Square: 3/4” drive and Output Square: 1” drive• Input: 730 ft-lbs. (1000 NM) and Output: 2200 ft-lbs. (3000 NM)• Increases range of torque 3:1• Tool length: 19.500”, body length 6.500”

Comes in a convenient plastic, blow-molded carrying/storage case. 1-year warranty.

CEN6380Torque Multiplier• Input Square: 3/4” drive and Output Square: 1” drive• Input: 730 ft-lbs. (1000 NM) and Output: 2200 ft-lbs. (3000 NM)• Increases range of torque 3:1• Tool length: 19.500”, body length 6.500”, reaction bar length: 15.625”, head

width: 3.750”, female depth: .750”, male depth: 1.125”, head depth from female to male: 4.500”

• 1-year warranty.

CEN6387Torque Multiplier Max Output 2000 ft/lbs.• Increases the range of your torque wrench as much as 4 to 1• Designed with four pinion gears in a compact housing• Frictional losses in the gear train may cause a torque loss of 10% to 20%• Reaction bar length: 18”

PREC4D600F36H 3/4” Torque Wrench and Breaker Bar Combo Pack• This unique combo pack allows you to use yourtorque wrench for

measurement and your ratcheting breaker bar to break bolts loose• Combo pack includes Split Beam Torque Wrench (PREC4D600F)

and Breaker Bar Handle (PREXT36H)• Push button allows the user to select desired length up to 41”

PREC5D600F36H (1” Drive)• Includes Split Beam Torque Wrench

(PREC5D600F) and Breaker Bar Handle (PREXT36H)

PREC4D600F3/4” Dr. “Split Beam” Torque Wrench with Detachable Head (200-600 Ft/Lbs)• Convenience: This tool does not have

to be “turned down” after use• Speed: Innovative torque mechanism

requires only fingertip force to adjust• Durability: All steel construction

resists industrial fluids and abuse • 4% accuracy clockwise• No need to reset tool • 1 year warranty, with dated

calibration compliance certificate

PREC5D600F1” Drive, 600ft./lb. Click Wrench (200-600 ft./lb.)• No need to reset the tool to the bottom of the

scale after use since there is no internal coil spring• Innovative torque measuring mechansim

requires only fingertip force to adjust the reading• Rugged construction resist industrial fluids and counters abuse• 4% Accurate clockwise and counterclockwise direction

$412.97

$452.49

$652.86

$429.95

$537.97

$537.97

$523.65$539.99

$103.99

$249.99

21

ESC100073/4” Drive break-back style torque wrench [200-750 ft/lbs]• Extremely accurate• Consistent torque values +/- 4%• Designed to torque various ranges of wheel types and sizes• Use on single and dual wheels• Break type model reversible• Includes molded high impact plastic case

CPTCP89203/4” Torque Wrench - 100-550 ft-lbs

CPTCP8920E3/4” Torque Wrench - 150-750 Nm

CPTCP89251” Torque Wrench - 100-750 ft-lbs

CPTCP8925E1” Torque Wrench - 200-1000 Nm

Chicago Pneumatic™ Torque Wrenches• 54 tooth fixed pear-shaped head ratchet with quick socket release• Simple torque adjustment with manual locking in front of the handle• Individually numbered and provided with Calibration certificate• Reliability of the mechanism up to 25,000 cycles• Includes a blow molded case for additional protection

ACDARM319-6A3/4” Digital Torque Wrench ( 44.28-442.8 Ft-Lbs.)• Standard functions: torque setting, measurement setting, mode setting• Operation in both clockwise and counter-clockwise directions• Accurary CW +-1.5%; CCW +- 2.5%• LCD backlight display that shows reached torque, battery life,

measurement modes N-m or kg-cm, in-lb, ft-lb.• LED flashing & vibration / buzzer warning when under torque or

overload.

ACDARM321-6A3/4” Digital Angle Torque Wrench (73.8-738 Ft-Lbs.)

ACDARM323-8A1” Digital Angle Torque Wrench (73.8-738 Ft-Lbs.)

• Performs torque range of 73.8-738 ft-lbs or 100 - 1000 Nm, • 30 memory settings• 2 LEDs flashing alert (green & red), allows to operate at 14 F

degree to 140 F degree. Battery type: 2 x AA (not included). • Tool weight: 10.58 lbs. • Overall length: 48-5/8” or 1235 mm.

KTI72175Ratcheting-style Torque Wrench 3/4” Drive, 100-600 ft/lbs• Ratcheting torque wrench• Style, 3/4” Drive, 100- 600 ft/lbs, 42” Long• Ratcheting style torque wrench “clicks” when

proper torque is achieved• Works only in clockwise direction• Packaged in blow molded case

KTI721453/4” Micrometer-style Adjustable Torque Wrenches,100-600 ft/lb• Range: 100-600 ft./lbs.• Achieve proper torque every time!• EZ-turn torque adjustment• Push-button release for quick socket changes• Manufactured for accuracy, strength and reliability• Works in clockwise and counter-clockwise directions

ESC100101” Drive break-back style torque wrench [200-750 ft/lbs]• Has a 57 inch long handle for easy use • Comes in a carrying case• Heavy duty construction• Torque range from 200-750 foot lbs torque• Only weighs 30 lbs

Quality made and precision. The large break angle improves accuracy by reducing the possibility of over torquing. Cam control of the mechanism gives a controlled break which will not throw the operator off balance

$675.19

$675.19

$840.60

$840.60

$1,055.00

$1,155.00

$1,155.00

$798.99

$394.50

$482.85

$989.70

22

EXTRA DUTY

SCUPSJ-3612ProSeries Jumpstarter with 2 18AH AGM Batteries• 3600 Peak Amps, 470 Cranking

& 385 Cold Cranking Amps• Integrated 3 Amp Automatic Charger • 2 Gauge, 55” HD Welding Wire Cables • On/Off Switch w/ Polarity Warning

for Added Safety• Built-In Voltmeter• 12V DC Power Outlet

SCUPSJ-4424Portable Power ProSeries JumpStarter for 12 Volt and 24 Volt Batteries• 4400 Peak Amps, 500 Cranking

& 415 Cold Cranking Amps • 2 x 22AH ProGrade H/O AGM Batteries • 2 Gauge, 55” HD Welding Wire Cables • On/Off Switch w/ Polarity and

Voltage Warning for Added Safety• 12V DC Power Outlet

SOLJNC1224Jump-N-Carry 3400 Peak Amp 12/24 Volt Jump Starter • 3400 Peak Amps and 850 Cranking Amps - 12V• 1700 Peak Amps and 425 Cranking Amps - 24V• Clore PROFORMER battery technology• 46” #2 AWG welding cable leads• Industrial-grade Hot Jaw clamps• Built-in automatic charger• Voltmeter provides charge status of onboard battery• 12VDC outlet to power accessories• 1 year limited warranty

SOLJNC950Jump-N-Carry 2000 Peak Amp 12 Volt Jump Starter• 2000 Peak Amps• 700 Cranking Amps• Clore PROFORMER battery technology• 46” #2 AWG welding cable leads• Industrial-grade Hot Jaw clamps• Built-in automatic charger• Voltmeter provides charge status of onboard battery• 12VDC outlet to power accessories• 1 year limited warranty

SOLES8000K1500 Peak Amp 24 Volt Truck Pac Jump Starter• Long 54” cables for extra reach

on large vehicles and implements • Industrial grade Hot Jaw

clamps penetrate corrosion on battery terminals

• 1 year limited warranty

SOLES1224 Truck Pac 3000 Peak Amp 12/24 Volt Jump Starter• ES Series battery designed specifically

for vehicle jump starting• Automatic recharging• Integrated voltage selection switch• LED battery status indicator• 60” #2 AWG cables• Industrial Grade Hot Jaw™ clamps• AWS Advanced Warning System™• DC outlet to power 12 Volt accessories• 1 year limited warranty

RFD4902Pocket Power XD Mini Jump Starter• 18,000 mAh provides 300 amps cranking

power and 600 peak amps• Intelligent cable features built-in overcharge

and reverse polarity protection• Able to jump start the widest range of vehicles• Includes 8 computer recharging tips and 4 in 1

pigtail phone charging cord• 2 USB charging ports in addition to a 19V and

12V charging ports

SCUDSR104DSR PRO Booster, 12/24V Mobile, 1050/850CA• 12/24 Volt wheeled booster• 12V 1050 cranking amps, 780

cold amps, 10000 peak amps• 24 Volt 850 cranking amps,

530 cold amps, 5000 peak amps

• 120 V ac 12v-8a charger• Includes auxiliary connector for

other specific cables ie. Nato plug and cat

Durable RotoMold Casing which is the strongest in the industry along with wheels for portability. Extra long high strand double insulation cablewith heavy duty clamps. Reverse polarity alarm and an auxillary connection for alternate cables.

SCUDSR11317200/8600 Peak Amp ProBooster for 12V/24V Batteries• 12V: 1400 CA | 1250 CCA |

17200 Peak Amps• 24V: 1250 CA | 1100 CCA |

8600 Peak Amps• Durable Roto-Mold casing - the

strongest resin in the industry• Extra-long, high-strand, double

insulation cable with Heavy-Duty clamps

• Built-in voltmeter• Auxiliary connector for

alternate cables• 8A external 120V

AC automatic charger• Reverse polarity alarm• Voltage detection• Replaceable fuse

booster packs

$455.49 $557.00

$404.89

$466.89

$3,184.29$2,630.79

$589.99

$569.99

$179.99

23

SCUDSR102DSR PRO Booster, 24V, 650CA• 650 Cranking Amps• 420 Cold Amps• 3200 Peak Amps• 120V Ac 24V-4A Charger• Professional cable with a built in

one-way diode for recharging on board a 24V vehicle

SCUDSR101DSR PRO Booster, 12V, 560CA• 500 Cranking Amps• 350 Cold Amps• 2000 Peak Amps• 120V Ac 24V-4A Charger• Professional cable with

a built in one-way diode for recharging on board a 24V vehicle

SCUDSR109DSR PRO Booster, 12V, 800CCA• For Gasoline and Diesel Engines• 100% Maintenance-Free• No battery inside• Microprocessor controlled• Built-in voltmeter• Override mode to start engine

without any battery mounted• Glow Mode for cold start of diesel engine• Short circuit and reverse polarity protection• 10,000 cycle/10-year lifespan

3 ways to use: 1) Connect clamps to vehicle battery; Recharge time: 150 seconds 2) Connect to vehicle’s 12V DC port; Recharge time: 400 seconds3) Connect to a power bank via Micro-USB port; Recharge time: 40-60 minutes

SCUPSW-61224Heavy Duty 250/65/35/5 Amp Wheel Charger/Starter• Large face, clear-view amp meters and volt

meters with easy-to-read graduated scales• 600 amp heavy duty, chrome plated steel

ultra-grip clamps with plastic-coated handles and heavy-gauge spring for conductivity

• Dual high performance transformer design• 6-foot heavy-duty, commercial gauge TPE

welding-grade cables 6 volt 180/80/40 amp, 12 volt 250/65/35/5 amp, 24 volt 200/30/10 amp, manual battery charger and engine starter with a dual high-performance transformer design. Extra-long, 6-foot AC line cord for greater accessibility and reach. Durable, heavy-duty steel cabinet with wide-track rubber wheels.

SOL4001The Smart Starter Commercial Jump Starter, 12/24 Volt• 12/24 Volt Operation• Accommodates 2 batteries

up to Group 31 size• Supports Flooded or

AGM batteries• LED Status display plus

7-segment voltmeter• 10 ft, 1/0 output cable gauge

SOLPL510012/24V Solar Pro-Logix HD Wheel Charger• Automatic Operation• 12 or 24 Volt modes• 100A max 12V charge rate• 425A engine starting assistance• Power supply mode (12 or 24 Volt)

The PL5100 also features a power supply mode that allows the operator to select a target voltage level for the vehicle’s system and the charger will supply current as needed to hold system voltage at the target level. This mode is supported for both 12V and 24V operation and allows the operator to select the desired voltage in 0.1V increments (13.3-14.9V, 100A in 12V mode; 27.2-29.9V, 30A, 24V mode).

MIDGR8-1200AMPKITMulti-Tasking Battery Diagnostic Station• Tests and charges AGM, GEL, and

Flooded Batteries• ECM - Power Supply Mode• Advanced Electrical S ystem

Diagnostics

The GR8-1200 features the innovative Multi-tasking Bridge, which allows the user to perform battery and electrical diagnostics on other vehicles while the charger is in use. That means you can now effectively multi-task in the garage and get more value out of one complete diagnostic station.

booster packs

starters/ chargers

$1,027.13

$2,157.40

$322.99

$751.89

$503.75

$947.49$3,392.00

24

ASO6001AHeavy Duty Commercial 6-12 Volt Battery Charger• 375 cold crank amps• 16 rates of charge 75 Amp

continuous charge with 375 Amps crank assist at 12 volts

• UL and CSA listed for indoor and outdoor use, “Safe in any Weather.”

• UL continuous ratings-100/75 Amp; UL cranking assist rating-375 Amp

• 500 amp, fully insulated, “Flexi-Spring” clamps

ASO6002B6/12/18/24V Battery Charger• The highest performance fleet charger on the

market comes with our best manufacturer’s boost rating of 600 AMP

• 400 cold crank amps• Charges 6, 12, 18, and 24 volt batteries• Heavy-duty transformer, patented ’Sub-Sil’

multidiode rectifiers, longer AC cord and DC leads are standard features for higher performance

• UL listed for indoor and outdoor use, “Safe in any weather.”

Heavy-duty chrome plated handle with clamp-holder/bar. Hinged steel cover to protect meters and knobs. Rugged 7” tires.

ASO60066/12/24V Battery Charger• Fleet charging power with a cranking assist

rating higher than any other charger in its classification

• This heavy-duty fleet charger rejuvenates all standard and maintenance-free, 6, 12, and 24 Volt batteries with five charging positions

• UL continuous rating- 70/65/30 Amp; UL cranking assist rating - 280 Amp

• UL rating indoor and outdoor - safety

ASOESS601112/24V, 70/35A, 200A Boost Wheel Charger/Analyzer• 70 AMP Power Supply

- Nominal 13.7V DC Output• AGM, GEL Cell, Sealed and

STD Flooded Batteries• Dead Battery Override Control• 3 Year Limited Warranty

-“Safe in Any Weather”

ASO60096/12V 70/60/2 Amp Battery Charger• A charger with the highest

performance crank assist of any 60-AMP charger on the market

• Listed for indoor and outdoor use by both UL and cUL, ’SAFE IN ANY WEATHER.’

• This fast starter has more features and higher ratings for the price than any competitive charger in its class

• Commercial quality features make it a great buy

SOLHT1224AGMHeavy Truck Jump Starter 12/24V (with AGM Batteries)• 1400 cold cranking amps in 12 Volt mode• 800 cold cranking amp in 24 Volt mode• Automatic 7 Amp x 2 Channel Battery

Charging System• 10’ Jumper Cable Leads• Ships with (2) Group 31 AGM Batteries Installed

Features installed AGM batteries to increase unit longevity and eliminate spill hazards. Specifically designed for over-the-road transportation and heavy-duty implements starting applications. It exceeds the challenges of frigid weather and delivers the instant raw power of 1400 cold cranking amps in 12 Volt mode and 800 cold cranking amps in 24 Volt mode. Features 10 ft cable leads made of 1/0 cable to reaching the starting points on vehicles of all shapes and sizes.

SOLHT1224Heavy Truck 12/24 Volt Commercial Charger/Starter• Automatic 10 Amp battery charger • 1400 cold cranking amps in 12 volt mode • 800 cold cranking amps in 24 volt mode • 10’ jumper cable leads • Ships with (2) Group 31 batteries

SOLPL37506/12/24V 60/40/15/5/250A Pro-Logix Wheel Charger with Engine Start• Features three operational modes: automatic

charging, manual charging and engine start• Provides the ability to properly charge virtually any

lead acid battery type: Conventional, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries

• Electronic controls and LCD display make it easy to set up each operation and to monitor chargingprogress, the charger provides extensive feedback regarding charging progress

• Advanced multi-phase charging process delivers a proper, beneficial charge every time, improving battery health and restoring reserve capacity

• Features a Soft Start Mode for severely depleted batteries and a Recondition Mode to rejuvenate distressed batteries

SOLBA42740-3000 CCA Electronic Battery & System Tester• 6 and 12 Volt battery testing; 12 and

24 Volt system testing• 40-3000 CCA testing range• Integrated printer• USB port with battery management

software for PC computers• Enables connection of volt probe, and

amp clamp (optional accessories)

chargers

$897.00

$969.00

$676.75

$859.00

$2,440.29

$1,789.00

$650.45

$626.15$691.69

25

OTC3167-HDHeavy Duty Battery and Electrical System Diagnostic Tester

Deluxe kit includes 24 volt heavy duty battery tester, 15’ test leads, instructional manual, and molded plastic carrying case.

MIDEXP-1000-HD-AMPDigital Battery and Electrical System Analyzer with Inductive Amp-Clamp for Heavy Duty/Fleets

MIDMDX-700P-HDHD Battery/System Analyzer with Integrated Printer• Built in integrated printer

MIDEXP-1000HDAMPKITHeavy-Duty Expandable Electrical Diagnostic Platform• AMP testing capabilities

including parasitic draw• Tests Flooded, AGM, & AGM

spiral batteries• Automotive & Commercial /

Fleet Battery & Electrical System Analyzer with Heavy-Duty Clamps, DDM Leads & Clamps, Amp-Clamp, Printer, & Case

MIDEXP-1000HDAdvanced Battery and Electrical System Analyzer

MIDMDX-700HDHeavy Duty Battery/Electrical System Analyzer• Battery Pack Testing (1-6 Batteries) for effective preventative maintenance testing• Special commercial battery algorithms for Group 31 batteries, 8D and 4D batteries• 15’ tester cable for efficient testing from the cab• New clamp designed specifically for HD and Commercial testing• Print capable with optional IR printer part # A087

ASO6139Plug-In Starting System Cable• Stainless steel receptacle mounts onto a truck bumper and battery• Includes 25’ tangle free starting cables, side terminal adapters,

and polarized LEXAN plug, 500 Amp clamp

SOL401252 25 ft. Heavy Duty 1 Gauge Cable• Cables remain flexible in all weather, down to -40C• Heavy-duty 800A industrial grade clamps penetrate

battery corrosion for effective connection• Tangle-free single cable design is easy to use,

transport and store1 year limited warranty

SOL422252 25 Ft. Heavy Duty 2/0 Gauge Cable• Cables remain flexible in all weather, down to -40C• Heavy-duty 800A industrial grade clamps

penetrate battery corrosion for effective connection• Tangle-free single cable design is easy to use,

transport and store• 1 year limited warranty

SOL402252 25 ft. Medium Duty 2 Gauge Cable• Cables remain flexible in all weather,

down to -40C• Industrial grade 600A parrot clamps

penetrate battery corrosion for effective connection

• Tangle-free single cable design is easy to use, transport and store1 year limited

HD & Parrot Clamp Booster Cables• Medium to Commercial duty • High/Low Temperature construction

FJC452551 Gauge 25’ 800 AMP HD Clamp Booster Cables

FJC452652/0 Ga. 25’ Booster Cables with 800 Amp Commercial Grade Clamps

KTI7453025’ Extra Heavy Duty 2 Gauge Cables with 500 Amp Parrot Jaw Clamps• Booster cables have a tangle-free design• Flexible to -40 degree Fahrenheit temperatures• Vinyl coated clamps help prevent rust and corrosion• For side and top battery post

testers

booster cables

$1,636.88

$1,229.16

$863.05

$1,663.32

$2,232.13

$695.00

$372.20

$54.99

$75.49

$139.99

$91.75

$193.95

$65.99

26

12v

450 AMP

12v

700 AMP

12/24v 700/350 AMP

12/24v 700/400 AMP

GDL11-605 12 Volt, Start-All®

• 12 volt nominal, 450 amp cranking capacity

• Volt and amp meter to monitor boosting output

• Voltage regulated to protect on-board electronics

• Antizap® voltage surge protection for safer boosting

• 30 ft., 1/0 gauge welding cable allows convenient access to vehicles

This small, compact, gasoline powered, heavy duty starter has 1000 amp full-power jaw

clamps that allow higher amperage flow. Polarity and low battery LED indicators confirm

proer connections. Features an electric start Briggs and Stratton Vanguard OHV engine

with single switch for easy operation. Ideal for small fleets, in town trucks, rental and

agricultural equipment. Dimensions are 12”L x 27-1/2”W x 26”H and weighs 315 lbs.

GDL11-61012 Volt, Start-All®

• 12 Volt jump starting

• 700 Amp output

• Full voltage regulation

• Volt and amp meter

• Single cable, single switch for easy operation

This Electric Start, air cooled Briggs and Stratton Vanguard

OHV V-Twin gasoline engine with 2-1/4 gallon fuel tank has the

output necessary for starting heavy-duty vehicles and equipment.

Performance you can rely on - start after start, year after year, and

power that will crank engines in cold weather climates vehicle after

vehicle. Powerful 12 volt jump starting in a compact size.

GDL11-62112/24 Volt, Start All® with AC Generator• Output: 12 volt nominal, 700 amp; 24 volt nominal, 400 amp

• Cables and Clamps: 30ft., 1/O ga. welding cables;

1000 amp full-power clamps

• AC Generator: 2000 watt, 1 duplex 120 volt, 20 amp outlet

• Voltage regulator with reverse polarity protection controls output

voltage to a safe level for today’s electronics

• Surge protection with Antizap provides safer boosting

• Polarity and low battery LED indicators confirm proper connections

• Engine: Electric start, air cooled Briggs and Stratton Vanguard OHV

V-Twin gasoline engine with 2-1/4 gallon fuel tank

GDL11-62012/24 Volt, Start All® • Voltage regulated - controls output voltage

to a safe level for today’s vehicles

• Surge protected with AntiZap provides safer boosting

• Volt and amp meter to monitor boosting output

• 30’ 1/0 gauge. cable allows flexibility and ease of use

• 1000 amp full power clamps allow higher amperage flow

The 11-620 has the output necessary for starting heavy duty vehicles and

equipment. Performance you can rely on - start after start, year after year

- and power that will crank engines in cold weather climates vehicle after

vehicle. Powerful 12/24 volt jump starting in a compact size. Electric start,

air cooled Briggs and Stratton Vanguard OHV V-Twin gasoline engine with

2-1/4 gallon fuel tank.

generators & start alls

$10,299.00

$11,149.00

$7,899.00

$9,649.00

27

AULMS908CV

AULMF2534

(855) 288-3587 autel.comRegister and update tools to guarantee latest coverage©2017 Autel Intelligent Technology Inc.maxitpms.com

NEWSMALLER

The complete MaxiSYS CV tool kit comes with the

latest compact size J2534 MaxiFlash Elite. Features

a built-in bluetooth VCI and performs pass-thru

programming functions. The software is updateable

and SAE J2534 and J2534-2 compatible.

Bidirectionally tests transmission

calibrations.

TRANSMISSIONACTIVE TESTS

AUTO SCANDIAGNOSTICS

Comprehensive vehicle analysis, live data, actuation tests, adaptations

and ECU information.

NEWSMALLERNEW

SMALL

1-YEAR SOFTWARE UPDATES & 1-YEAR WARRANTY INCLUDED

WE’VE GONE

LIGHT DUTY / MEDIUM DUTY / HEAVY DUTY

COMMERCIAL• AGRALE

• AISIN

• ALLISON

• AUTOCAR

• BENDIX

• BOSCHAUTO

• CAPACITY

• CATERPILLAR

• CUMMINS

• DETROIT

• DODGE

• EATON

• FIAT

• FORD

• FOTON

• FREIGHTLINER

• GMC

• GREAT WALL

• KIA

• MACK

• MERCEDES BENZ

• MITSUBISHI

• MITSUBISHI FUSO

• MTU

• RENAULT

• SETRA

• STERLING

• TOYOTA

• UD

• VOLKSWAGEN

• HINO

• HYUNDAI

• INTERNATIONAL

• ISUZU

• IVECO

• KENWORTH

• MWM

• NISSAN

• OBD

• PACCAR

• PETERBILT

• POWER STROKE

• VOLVO

• WABCO

• WESTERN STAR

• WORKHORSE

• ZF MERITOR

AULMS908CV

J2534 MAXIFLASH ELITEAULMF2534

28

®

®

®

NRS263025-NSJPRO Professional Diagnostic Toolbox with Next Step• JPRO Professional Heavy-Duty Command Bundle covers class 7-8 vehicles• Includes JPRO Command Modules for Ford, GM, and Sprinter Vehicles• Annual subscriptions for Mack & Volvo, Detroit Diesel, and Cummins engines• Provides Next Step Service Information• 6-pin, 9-pin, Mack & Volvo OBDII Vehicle Cables, USB cable,

DLA+ 2.0 Adapter with 3 CAN support

The professional Tech’s choice for fast & easy heavy-duty diagnostics & repair now includes bi-directional testing & controls for Mack & Volvo, Detroit, and Cummins Engines. NOW INCLUDES 18,000 diagnostic codes and bi-directional controls for Ford, GM, and Sprinter vehicles. Short repair times, increase uptime and lower maintenance cost with this PC-based platform.

NRS212100 JPRO Professional Software Bundle• Covers all major Heavy-Duty OEMs (Class 7&8) 1997 - present• All makes, all models for class 3-8 vehicle coverage• Bi-directional controls and proprietary information

for Mack, Volvo, Detroit Diesel, Cummins, Ford, GM and Sprinter• Reads, displays and clears 44,000+ fault codes• Next Step service and repair information for engines, ABS, transmissions and more

NRS263025JPRO Professional Diagnostic Toolbox• Reads, displays and clears 44,000+ fault codes• Now with expanded bi-directional coverage for Heavy-Duty

(Mack, Volvo, Detroit, Cummins) and Medium-Duty vehicles• Laptop comes loaded with JPRO® Professional™ - Software

Bundle with 12 months of support and annual subcriptions for Mack and Volvo, Cummins & Detroit Diesel

• Shortens repair time, increases uptime, and lowers maintenance costs

• Simultaneous diagnostic assessment of the ENTIRE truck in less than one minute

All-in-one PC-Based diagnostic platform includes bi-directional testing and controls for Mack, Volvo, Cummins and Detroit engines.

NRS212100-NSJPRO Professional Diagnostic Software with Next Step• Most comprehensive and

powerful all makes, all models diagnostic software• Performs service and repair information with bi-directional functionality• Reads, displays and clears 44,000+ fault codes• Now with expanded bi-directional coverage for Heavy-Duty (Mack, Volvo, Detroit

Diesel and Cummins) and Medium-Duty vehicles (Ford, GM, Sprinter)• Also includes Next Step Service Information

scan tools and software

$4,929.00

$1,598.00

$3,705.00

$2,659.00

29

®

NRS122511 Noregon Trailer Diagnostic Adapter with Power Cable• Includes J560 Power Supply Cable which allows connection

directly to the trailer using a secondary power source• Compatible with JPRO Professional Diagnostic Software• Also compatible with Bendix - ACom Trailer, Haldex ABS, Meritor

WABCOTOOLBOX, and Wabash ABS for PLC• Kit includes: 7-pin J560 T-Connector cable, and USB cable• Adapter kit comes in convenient carrying case

NRS40106 Set-Up/Installation and Testing for Customer Computer• Required Service To Install OEM Software on customer supplied computers• Includes shipping insurance for customer supplied computer• Set-up and testing ensures that all JPRO applications open and run properly• “On Truck” testing also ensures all OEM applications open and run properly• Let Noregon’s experts get your computer shop ready!

When you purchase OEM software from Noregon to install on your currently owned computer, Noregon’s support experts configure & update each computer, activate and register all OEM software.

NRSVEROPT2Verizon/Noregon Service Bundle

NRS122061JPRO DLA+ 2.0 Adapter Kit• Provides 3 CAN channel support • 9-pin vehicle cable • 6-pin vehicle cable • USB cable • Carrying case

The DLA+ 2.0 adapter kit features a heavy-Duty Diagnostic communication device that interfaces the vehicle to a PC via USB cable for diagnostic and vehicle information, re-programming or parameter adjustments.

NRS232125-NSJPRO Professional Diagnostic Software and Adapter Kit• Includes: JPRO Professional Heavy-Duty Command software Bundle• Annual subscriptions for Mack & Volvo, Detroit Diesel, Cummins• Also includes Next Step Service Information• 6-pin, 9-pin, USB, and Mack & Volvo OBDII Vehicle Cables• JPRO DLA+ 2.0 Adapter with 3 CAN support

NRS232125 JPRO Professional Diagnostic Software and Adapter Kit• Now with Medium-Duty Coverage

for Ford, GM, & Sprinter vehicles clears 44,000+ fault codes

• Shortens repair time, increases uptime, and lowers maintenance costs

• Reads displays and clears 44,000+ fault codes

• Comes with JPRO DLA+ 2.0 Adapter, 6-pin, 9-pin cables, Mack & Volvo OBDII Cable for DLA+ 2.0, USB Cable, and Fleet Service Carry Case

• Also contains JPRO® Professional™ Di agnsostic Software

All makes, all models diagnostic tool, complete with DLA+ 2.0 adapter kit and cables. Also contains JPRO Professional software suite provides service and repair information with bi-directional functionality.

NRS32135Heavy Duty ABS Software Bundle


$2,198.00

$716.00

$599.00

$8,075.00

$822.15

$3,299.00

$649.00

30

OTC3075Ez-Tap Wireless Diagnostic Hardware Kit• Ez-Tap truck access point hardware supports

diagnostic modes of operation for J1939, J1708 and CAN protocols using a shops OEM software. This fully RP-1210a compliant access point communicates with the vehicle and transfers vehicle information to your PC. A 9-pin connector is built into the device, eliminating the need for a cable.

Kit includes: Ez-Tap wireless (non-locking) VCI, Ez-Base wireless adapter, Ez-Tap 9-pin to 6-pin adapter, USB cable and Ez-Tap CD.Note: OEM diagnostic software not included.

OTC3085Ez-Tap Fleet Telematic Wireless Starter Kit• A truck access point providing telematics modes

of operation for J1939, J1708 and CAN protocols. • Direct Diagnostics Mode – for use with

OEM diagnostic software.• Fault Monitoring – Selective Fault Reporting.

Kit includes: Ez-Tap wireless locking VCI, Ez-Base extended range wireless, USB cable, Ez-Suite software. Note: OEM diagnostic software not included.

OTC3418Heavy Duty Code Reader Kit• HD J1587 / J1708 and J1939 CAN,

Engine, Transmission/ ABS coverage and more for diagnostic trouble codes

• Provides on screen DTC definitions for heavy duty standard codes

• Applications: Tow trucks, recreational vehicles, cement trucks, dump trucks, garbage trucks, buses, step vans, municipal vehicles, refrigerated trucks, and conventional trucks

• Battery powered for off vehicle use• Internet update capable

BOS3824ESI Heavy Duty Truck Multi-brand Diagnostics System• All major HD OEM’s covered • DPF re-burn• Bi-directional control • Cylinder cut-out • Key special tests • Injector Coding • RP1210 compatible VCI/VDA • Auto ID• Reads and clears fault codes • Data stream• Full parameter access• Kit includes Bosch DCU100 hand-held tablet• Contains Trouble shooting and repair information• Provides electrical wiring diagrams and component locations

BOS3824BSC Multi-Brand HD Truck Diagnostics for PC• PC Version of ESI Truck• Multi-Brand HD Truck Diagnostics • All major HD OEM’s covered• Read and clear fault codes • Key special tests, bi-directional tests• Provides electrical wiring diagrams• Contains repair information • Full parameter access

AULMS908CVHeavy Duty Diagnostic Scan Tool• Read and clear codes, view and graph live data• Perform comprehensive vehicle diagnostics and services

on all major brands and OE-specific system components • Provides the special functions that complete repairs

including Injector Quantity Adjustment, DPF Regeneration, Adaptations, Calibrations, Maintenance Resets

• Get more than twice the coverage at almost half the price* *Google search “Diesel Scan Tools”• Bluetooth enabled & wireless connection to vehicles and internet• Home screen icons are specific for each truck brand or systems manufacturer• 9.7” LED touch screen and an Android 4.0-based platform• Vehicle Coverage: Mack, Peterbilt, Kenworth, Freightline, Paccar, Isuzu and more• Service type: Detroit Diesel, Allison, Cummins, Hino, Wabco, Bendix and more• 1 Year Warranty • 4.5 hour battery life• 1 Year free software updates (constant updates providing the user additions / improvements to vehicle coverage)

Built on the MaxiSYS Android-based platform, the MaxiSYS CV performs enhanced system diagnostics on more than 60 Heavy Duty vehicle brands. Read and clear codes, view and graph live data, perform tool-guided maintenance services, complete an array of special functions and diagnose manufacturer-specific systems including Allison transmissions, Bendix ABS Brake systems, Detroit Diesel Engines and Eaton and Wabash ABS trailer brakes.


$1,066.00

$1,999.99$461.85

$9,999.99

$7,636.00

$3,995.00

31

NEW

NEW

LAU301050175CR-HD Plus Heavy Duty Code Scanner• Covers Class 4 through Class 8

HD Trucks and OBDII LD vehicles• Includes 6 pin and 9 pin Deutsch connectors• Covers J1587, J1939, and J1708 protocols• Covers engine, transmission, brakes and more• Monitor all data and view LIVE data streams

CDOHDMOBILEVCI & Application for Heavy Duty Class 4-8• Works with iOS and Android• Class 4-8 Coverage along with OBDII• Light-Medium Duty Coverage• Read & Clear Codes• DPF Resets and Regens

The HD Mobile transforms your Smart Device – iOS or Android – into a powerful class 4-8 code scanner. With DPF Reset/Regen capabilities! And it also works on OBDII.

DRWDREWLINQHD / Commercial Passthru Tool• Industry’s most capable Heavy Duty / Commercial passthru tool• Works with today’s OEM passthru diagnostic

and reprogramming applications• Supports RP1210 applications such as

Pocketflet Diagnsotics and DTC Solutions• Supports 4 simultaneous CAN channels• Rugged design and comes with a 2 year warranty

DrewLinQ is a high-performance, rugged device supporting Heavy-Duty, Medium-Duty, and OBDII vehicles as well as off-highway, agricultural, military, automotive, and other industrial-stationary equipment. It supports 4 concurrent CAN (J1939/ISO15765) channels, J1708, and all of the OBDII protocols. It works with the TMC RP1210 applications you currently use, other J2534 OBDII pass-thru and diagnostic applications, and comes with a standard 2-year warranty.

CDOHDCODEIIHeavy Duty Codereader with Caterpillar and DPF• Heavy Duty Codereader with

Caterpillar and DPF• Class 4-8 Heavy Duty Truck Full

Coverage Code Scanner• Auto-IDs all systems and modules,

including Brakes, Transmission, Body Controls and more!

• CAT Industrial, Construction and Power Equipment Coverage

• Now with DPF Regens for Fuso, Cummins and Detroit - more to come!

• Free Internet Updates

CDOHDPROTABAndroid Tablet for Heavy Duty• True IP65 Rated Android Tablet with Wireless Bluetooth VCI• Class 4-8, Light-Medium Duty and Agricultural Coverage• Read/Clear Codes, View/Graph Live Data and full Bi-directional controls• Perform OEM Level Resets & Regeneration• Change and Set Parameters

You can’t get here overnight. Introducing the HD Pro Tab – an open Android, Bluetooth wireless scan tool for Heavy Duty Truck and Agricultural & Industrial applications. The HD Pro Tab is three years in the making, with software developed at the dealership level. This means OE-level functionality without the costly subscription. Perform DPF Regeneration & NOX Resets, Injector Programming, Change and Set Parameters, along with SCR/DEF coverage and full bi-directional controls covering over 60 manufacturers, including John Deere, Komatsu, and Bluebird. Full Transmission and Brake System coverage is also part of the package. Unlike the competition, the HD Pro Tab boasts a true IP65 rating. It is drop tested and water resistant, with all ports fully sealed from the elements. Screen size is 10.1” IPS and a full suite of connectors accompanies the HD Pro Tab.


$389.99

$700.00

$498.00

$449.97

$5,999.00

32

MPS888014Meritor WABCO Software Suite for Pro-Link IQ Scan Tool• Display and clear ABS proprietary

active and inactive fault codes• View or create data lists containing

wheel sensor speeds, sensor voltages, vehicle voltages and switch status

• Reprogram data on the ABS system for items• Command special test functions such as

actuating valves, retarded relay and the lamp test• Graph or record on one screen the wheel speed sensors

to quickly identify a defective component or eliminate it as the problem

MPS682020Complete Abs Software Kit for Pro-Link IQ• Read Fault Codes • Clear Fault Codes • View Brake Data• Coverages ABS Suite and Trailer ABS Suite• Includes: Complete ABS Kit PN 682020, Trailer Kit PN 682021, ABS Suite PN

682014, Trailer ABS Suite PN 882021, Meritor WABCO® Suite PN 888014, BENDIX® ABS Suite PN 889013 and J560 PLC Adapter PN 602020

MPS188001Pro-Link IQ Diagnostic Scan Tool• Saves time by automatically scanning for all vehicle ECUs to identify types and display active

and inactive faults - no need to switch between an engine, transmission or brake application• OEM proprietary applications feature manufacturer specific terminology,

additional fault codes, parameters, reprogramming and special tests if applicable• Intuitive, easy to use, color touch screen displays multiple codes,

ECU data list parameters, graphs, and records at the push of a buttonNEXIQ’s Pro-Link iQ sets a new benchmark among diagnostic scan tools for the commercial vehicle market. In addition to the heavy duty standard software, the introductory diagnostic release contains several of Pro-Link’s most popular OEM prorietary applications available for purchase. No more cartridges or cards to keep track of, applications are downloadable from the internet and remain resident on the iQ’s hard drive. Easy to use, iQ was developed with technicians for technicians.

MPS181030Pocket Iq with Case, Hds & Adapters• Checks engine speed/load, pressures,

temperatures, and other data• Reads active fault codes• Reads and clears inactive fault codes• Displays trip data• Collects and stores data

from multiple vehicles• Stores data in PDF or text format• Provides J1587 and J1939 data


MPS208040Pro Link Plus MPC Cartridge• Provides flexibility to provide diagnosis of engine and

vehicle systems through the use of PC MCIA application cards (sold separately)

• Works with vehicle protocols J1587, J1708, J1939, 160 baud• Easy application updates via RS232 port • Custom data list • Snapshot feature • Printer support

The Multi-Protocol Cartridge (MPC) is an Intel-based Pro-Link Plus compatible cartridge designed to diagnose today’s J1708, J1939, 160 Baud, ISO 9141 vehicles. It provides anew platform that greatly enhances the flexibility of the Pro-Link Plus, and extends the life of this most versatile tool.

To address advanced capabilities provided by manufacturers, the MPC uses PC MCIA cards. The cards are plugged into the back of the unit, and provide additional functions unique to each manufacturer. The following list contains features and functions that are available with this cartridge.

$1,499.00

$573.39

$1,299.00

$3,036.00

$681.00

33

NEW NEW NEW

MPS880010NEXIQ Technologies Pro-Link iQ International Engines• KOEO—Key On Engine Off and KOEO—

Injector Buzz Test• KOER—Key On Engine Running and

KOER—Injector Contribution Test• Injector Disable Tests (Dual box ECMs only)• Cylinder Cutout Test (Dual box ECMs only)• Read Fault Codes, Clear Fault Codes, and

View Engine Data

MPS880024Caterpillar ACERT v 2.0• Calibrations - Boost Calibration, Timing Calibration• Read Fault Codes and Clear Fault Codes• Diagnostic Test - Intake Valve Actuator Solenoid Test, Cylinder Cutout• Diagnostic Test - Injector Solenoid Test, Injector Actuation Pressure Test• View/Reset Trip Data, View EPA 07’ DPF Data Points, and View EPA 07’

DPF Fault Codes

MPS889024Pro-Link iQ Caterpillar Engines• Read Fault Codes, Clear Fault Codes, View/Reset Trip Data, and View Engine Data• Covers - 1990–2003 - 3116, 3126, 3176, 3406, C-9, C-10, C-12, C-15, C-16• Calibrations • Diagnostic Tests and Special Tests• Display and change configurable parameters

MPS828005Navistar® International® Diamond Logic® Builder Fleet • Read Fault and clear diagnostic fault codes• View vehicle parameters and features• Bi-directional control of electrical components• View switch location and cluster configuration• Automatic module detection• Graph parameters • Record snapshots

MPS807024Software PCMCIAfor Caterpillar ACERT Engines• Reads fault codes, clears fault codes• View/reset trip data• View engine data list• Does Bi-Directional calibrations, special tests,

diagnostic tests• Display and change configurable parameters


COJ29366CVKITCommercial Vehicle Diagnostics Kit• Provides end-users with state-of-the-art diagnostics

for trucks, buses, and trailers, as well as access to light commercial vehicles

• Read and clear trouble codes • View live data PIDs• Perform functional tests and special functions such as

calibrations that complete repairs• Includes one year of info online, the latest in repair

and diagnostic procedures support, including wiring diagrams

Kit includes: COJ29366 Jaltest Link Kit, COJ29300 Software Activation for Commercial Vehicles, COJ29053 Software One-Year License of Use and COJ29428 Jaltest Info Online One-Year of Use

COJ29750AGKITComplete Agriculture Diagnostic Kit• Provides end-users with state-of-the-art diagnostics

for the computerized systems repair technicians encounter day in and day out

• Read and clear trouble codes • View live data PIDs• Perform functional tests and special functions such as

calibrations that complete repairs • Includes the cable set required for proper computer

connections Kit includes: COJ29750 AGV Kit, COJ29762 Software Activation AGV, COJ29761 Software One-Year License and COJ29758 Jaltest AGV Cable Set

COJ29981MAKITComplete Marine Diagnostics Kit• Provides end-users with state-of-the-art

diagnostics for inboard, outboard, and jet ski engines

• Read and clear trouble codes• View live data PIDs• Perform functional tests and special

functions that complete repairs Kit includes: COJ29981 Marine Link Kit, COJ29990 Software Activation Full Kit, COJ29982 Boat Cable Set and COJ29982 Jet Ski Cable Set

AGRICULTURE MARINE COMMERCIAL

$725.59

$749.99

$915.00

$999.00

$1,172.00

$7,199.99$3,999.99 $4,679.99

34

IPA78657 Round Pin Tractor Trailer Circuit Tester• Plugs in line to the trailer to allow the truck to power the trailer while you test each circuit• Troubleshoots tractor trailer circuits• One person can test all the lighting alone• Allows you to bypass troubled circuits while on the road• Eliminates guesswork• Comes with an extra jumper connector

SGT18580Release Tool for Weather Pack Terminals• Use with three sizes of Weather Pack Terminals: 10-12• AWG, 14-16 AWG and 18-22 AWG• Can also be used to restore the tabs to their original position• Comfortable handle grip

SGT18910Terminal Crimper for Weather Pack & Metri Pack• Easily crimps 14-22 gage open barrel Weather Pack and 150

and 280 Series Metri Pack terminals and seals in two operations• Has three wire crimping and two seal crimping positions• Steel construction • Display Packaging

LIS2743024V Heavy-Duty Circuit Tester• Works on any circuit up to 28 volts

including many heavy duty applications on large trucks and farm implements: heavy duty probe, cord and clamp

LIS28830Heavy Duty Digital Circuit Tester 3-48V• Operating range of 3-49 volts DC to work on most

vehicle electrical systems• 360° visibility of polarity

IPA9004ASmart MUTT® (7 Spade Pin) Trailer Tester• Powers lights individually or all at once

via auto scan or by remote control• Ground failure detection: differentiates

between wire and chassis ground• Identifies open circuits and cross-wired circuits• Pulses power to shorted and overloaded

circuits (patented Pulsar® technology)• Operates electric brakes by remote control

IPA9007ASmart MUTT® (7 Round Pin) Trailer Tester• Power lights individually, all at once,

via auto scan or remote control• Ground failure detection: differentiates between wire and chassis ground• Identifies open circuits and

cross-wired circuits• ABS fault codes via Aux and brake

circuit activation (i.e. Wabco/Bendix Tab-6 systems)• Pulses power to shorted and overloaded

circuits (patented Pulsar® technology)

IPA9008-SE Super MUTT® StandardThe Standard Equipment model includes 1 Remote, 1 Chassis Ground Cable, 1 7-way Pig tail and Glad Hand Hose attachments. The Super MUTT® SE places a load on the trailer’s electrical circuits to identify wiring problems while providing remote control operation over both Air Brakes and Lights. Built to facilitate a one-man testing operation, the Super MUTT® reduces guesswork and inspection time to prevent failures that lead to expensive road calls and citations. The remote control allows for repetitive air brake actuation at each axle to reveal developing problems often missed by normal testing procedures.

IPA9008-DLSuper MUTT® Pro Edition Trailer Tester The DL Model Kit includes the 7-way pig tail, glad hand hoses, 4 remote controls, steel face shield and rain cover. The Super MUTT® Deluxe DL Model places a load on the trailer’s electrical circuits to identify wiring problems while providing remote control operation over both Air Brakes and Lights.

• Perform leak down test on service and emergency lines

• Adjust slackers & measure pushrods using remote control

• Power lights individually, all at once, via auto scan or remote control

• Pulses power to shorted and overloaded circuits (patented Pulsar® technology)

• ABS fault codes via Aux and brake circuit activation (i.e. Wabco/Bendix Tab-6 systems)

trailer testers

electrical

Battery Not Included

Battery Not Included

$629.99

$629.99

$39.50

$2,125.00$1,849.00

$8.39

$24.99

$16.99

$70.07

35

IPA8025Trailer Plug and Terminal Cleaner Kit• Cleans 4, 5, 6 and 7 spade trailer terminals

• For Male and Female Connections

• Maintain continuity and prevent circuit failure

• Quickly and precisely cut away corrostion

• Great for use on many standard bullet and butt connectors

IPA8044Truck and Trailer Connector Cleaner Master Set• For use on 4, 5, 6, 7 (spade), and 7 (round)

truck and trailer male and female terminals

• Includes: (6) Terminal Cleaners, (6) 8mm Swabs, (12) 5mm Swabs and (1)

tube of DeoxIT® electrical contact cleaner/enhancer

• Packaged in leather-style holster with magnetic clasp

• Replacement/individual part numbers listed inside package

• Maintains proper surface connections between truck and trailer

IPA9200Tactical Trailer Tester Field Kit• Test all trailers • Test all vehicle tow circuits

• Clean all truck and trailer electrical connections

• Custom, crushproof case • Lifetime Warranty

Includes

1. #9102 Heavy Ranger MUTT®

2. #7900K-1 5 ft. 7 Round Cable

3. #7900A-5 7 Round to 7 Flat Adapter

4. #8000 3-Way Trailer Adapter

5. #8044 Master Trailer Cleaner Set

6. #8040 Diamond-Grip Terminal Cleaners

7. #7865L 7 Round Pin Tractor Trailer Circuit Tester

8. #7893 7 Flat (Spade) Pin Trailer Circuit Tester

9. #7897 6 Round Pin Tractor Trailer Circuit Tester

10. #7866 4/5 Pin Trailer Circuit Harness Checker

11. #CHR0001 500mA Battery Charger

IPA8048HD Fleet Technician’s Electrical Terminal Maintenance Set• Clean and restore male and female

terminals on fleet connections• Ensures proper diagnostic connectivity• For Deutsch, Cannon, 7-way round, bullet,

weather pack, trailer light connectors and more

IPA9101Light Duty Ranger MUTT® Trailer Tester• Tests 7-spade, 6-round and

4/5-flat pin type trailer harnesses• Short circuit protectionTurn signal

simulation and power verification LED• Water resistantTests lights

and electric brakes

IPA9102Heavy Ranger MUTT® Trailer Tester• Test 7–way Round pin• Short circuit protection• Turn signal simulation and

Power verification LED• Internal battery compartment• Water resistant • 5000m • A Battery Charger incuded

trailer testers

$794.95

$94.95

$109.99

$186.99

$53.19

$187.96

36

NEW

NEW

NEW

Power Probe III Test Light and Voltmeters• Bad Ground Indicator and Short Circuit Indicator• 20’ Jumper Lead Set • Continuity Tester• Relay and Component Tester • Built in flashlight

PPRPPH1“The Hook” Ultimate Circuit Tester• Measures and displays Amps as you power up components and circuits• Displays resistance in Ohms (up to 15 MegOhms)• Controls current from 2 to 65 amps (25 amps continuous)• Relay Tester (Test continuity and activate simultaneously)• Auto Sensing Probe automatically chooses Meter and Range for user

PPRPPECT3000Intelligent Circuit Tracer for Shorts and Opens• Automatic and manual sensitivity locking• Arrow indicates direction to short• Signal Distance indicator bar• 10 minute auto shut off• Ergonomic housing

PPRPPKIT04Power Probe IV Master Kit with PPRPPECT3000• Supplies Power and Ground for Functional Component Testing• Fuel Injector tester for easy circuit diagnosis• Signal Distance indicator bar• 10 minute auto shut off• Large Color LCD Screen with Easy to Navigate User Menu

BOS1699500001 HPK 200 Accessory Kit for HD and Medium Duty Apps• PowerSmoke Adaptors• Halogen inspection light• Vapor Producing fluid• Accessory Storage kit• Quick start guide

BOS1699500000HPT 500 High Pressure Leak Tester• Produce leak detection “smoke” at higher pressure than standard machines (up to

30psi) for higher pressure systems• Produce a higher volume of smoke for larger volume systems• Ideal for finding leaks in exhaust after-treatment systems• Test entire system in 15 minutes• High-pressure and large volume systems found in heavy-duty truck and

turbocharged passenger vehicles

PPR319FTC-REDPPR319FTC-BLUPPR319FTC-FIREPPR319FTC-BLKPPRPP319CAMOPPR319FTC-CARB (Carbon Fiber)

LIS699009 Piece HD Turbo System Test Set• Helps Locate Air Leaks in the Components• Plug the output side of the turbo and the intake inlet• Air is applied through one adapter to show the

presence of leaks within the system• includes four pairs of adapters to fit most turbo

systems on class 7 and 8 trucks• Can be used on some cooling system hoses

specialty testers

$199.99

$425.00

$169.95Your Choice:

$1,799.31

$3,279.99

$251.34$499.00

37

CDOHDPROTAB

CDOHDCODEII

OTC4200Nozlrater Diesel Injector Nozzle Tester• Here is the ultimate tool for diagnosing a number

of problems that affect diesel fuel injector nozzles• The Nozlrater tester enables you to check for leakage, pop-off pressure,

spray pattern, and chatter. This tool will accommodate a wide range of injectors. We also offer adapters so you can troubleshoot nozzles used in popular automotive, agricultural, and construction engines.

• Nozlrater features a rugged, lightweight reservoir that holds 7/10 of a gallon of fuel. It is equipped with a replaceable 2-micron filter. The large, dual-scale, high-pressure gauge is protected by a guard and includes an indicator needle to record maximum pressure reached. The tester is light enough to be easily carried for field use. Or you can bench-mount it, using the holes in its base

• Not designed for Cummins or Detroit injectors

WAE76600Hi-Vis VoltPRO Voltage Tester• Dynamic voltage drop testing • Voltage snapshot• Min/Max Glitch Capture • Power and ground LED indicators • Computer safe

High visibility, simple to use, one handed Dynamic Voltage Testing. Indicates power and grounds. Test the circuit’s ability to deliver current and identify loose, corroded or broken wires. Capture intermitent spikes or drops in voltage. Take Voltage Snapshots in any mode, any time.

TM

PPRPHPT1Penetrator Tungsten Tip and Extender• High performance Tungsten Alloy Tip • Designed to be used with any PowerProbe• 4mm standard plugs and jacks• Provides accurate readings with DMM’s scopes meters

Shown Connected

specialty testers

$31.57

$153.26

$1,170.99

38

OTC5039Charged Air Cooler Tester• This is the easy way to find air leaks in the charged

air cooler systems used on class 7 and 8 truck engines• Features a large 2-1/2”, 0-60 PSI pressure gauge, regulator and relief

valve, and two safety cables• Also has quick disconnect air fittings that attach to a 3”, 3-1/2”, or 4”

cooler hose

OTC5079Heavy Duty Power Steering Pump Analyzer• Troubleshoots problem components in a

heavy-duty power steering system• Flow and pressure reading meter measures both 1 to 10

gallons oil flow and up to 3,000 PSI of pressure• When connected in line, this universal analyzer will isolate

the failed components in just minutes - there is no wasted time as in trial and error methods

OTC6005ADiesel Glow Plug Removal Tool• Removes damaged, stuck-in glow plugs on diesel engines without

having to remove cylinder head, saving hours of service time• When glow plug tip is melted and plug cannot be removed without

breaking it off, this tool is the only answer

• Services diesels in popular 3/4 and 1/2 ton pickups• Comes in plastic storage case

MITMV4534Universal Cooling System Test Kit• High-volume hand-operated pump builds

pressure quickly to locate leaks• Universal cooling system adapter replaces

more than 20 individual adapters for cars, vans, light- and heavy-duty trucks

LIS61060Diesel Filter Wrench for Paccar• All metal wrench to remove and install bowls on newer

Paccar Chassis Mounted Fuel Filter Assemblies• Half-moon design allows easier access to the fuel filter found on

Kenworth, Peterbilt, and Cummins diesels• Laser-cut steel provides strength to loosen even the toughest bowls

LIS61090Diesel Filter Wrench for 5” Davco• 5” wrench works on any diesel engine with fuel flow

rates up to 60 gph, Class 4, 5, & 6 trucks, pickup trucks, refrigeration units and some Biodiesel applications

LIS61110Diesel Filter Wrench for 6” Davco• 6” wrench works on any diesel engines found in

Caterpillar CT660, Ct11, CT13, CT15, Cummins, Detroit Diesel, International, Mercedes Bens, Paccar, Daimler Trucks North America, Kenworth, Mac, Navistar, Peterbilt, Thomas built Buses, Volvo

LIS61130Diesel Filter Wrench for 8” Davco• 8” wrench works Detroit Diesel DD13,

DD15 and DD16 engines found in Paccar, Daimler Trucks North America, and Volvo

OTC6914Davco Diesel Filter Wrench• Fits Davco Diesel filter models, 232-233-234• Durable, stainless steel construction• Opens vent cap also

OTC6915Davco Diesel Filter Wrench• Fits Davco Fuel filters 382 and 384

OTC6492Engine Preluber Kit• Required to prime the oil pump

and fill the oil galleries and internal engine components with clean, new oil

• Connects to engine oil system at the oil pressure sensor on a variety of domestic and import engines

• Oil pressure sensor adapters included

OTC5021Universal Diesel Engine Compression Gauge• Works on any diesel engine to test

compression up to 1000 PSI and 7000 kPa• Include check valve, push button

compression release, and a quick disconnect fitting

• Straight and 45 degree hose connectors are included

Professional Diesel Injector-Seat Cleaning Kits• 17-piece kit includes helix brushes, two-stage

brushes, bore brushes, and SWAB-EEZ®

• SWAB-EEZ® for cleaning and polishing injector bores and cups

IPA8090B (Brass)IPA8090S (Stainless Steel)

UVU550500HDHeavy Duty Airlift Cooling Tester• Eliminates airlocks in

vehicle cooling systems• Refills vehicle coolant

system in seconds• Equipped with a 90° angled gauge• OEM Approved by International Truck• Checks for coolant system leaks while under vacuumOEM approved Airlift HD eliminates airlocks in HD applications and refills the cooling system in seconds. Checks for leaks in the coolant system while under vacuum.

oil change tools

fuel systems tools

$471.29

$794.00

$65.00

$147.37

$23.99

$24.29

$27.89

$32.99

$34.27$317.25

$236.15

$181.39$159.95

$193.99

$43.87

39

LIS618505 Piece Truck Hub Seal Installer Kit• Fits the Most Popular Size Seals

for Class 7 and Class 8 Trucks• The driver is designed to hold the

seals to make installation easier• Includes five drivers and handle

extension for extra reach• For driving seals on hubs with deep brake

drums without removing the drums• Fits trailers and some medium duty trucks

LIS61900Heavy Duty Bearing and Seal Driver• Fits most class 8 over the road trucks and

trailers and some medium duty trucks• Driver sizes: 3-43/64”, 4-7/8”, 4-13/16”,

5-1/2”, 5-25/32”, and 6”

KAS4651Automatic Slack Adjuster Release Tool and Wrench• Used for adjusting Rockwell Automatic Slack Adjusters• The 5/16” double square offset reversible wrench features an E-Z

grip handle• Release the anti-reverse mechanism without prying and apply

more turning power with less fatigue

KAS75787/16” Automatic Slack Adjuster Wrench• Used for brake adjustment on heavy-duty trucks

equipped with Haldex slack adjusters • 7/16½ single hex wheel fits the drive on Haldex slack

adjusters• The extra long handle makes the wrench comfortable

when doing the job of overcoming the anti-reverse mechanism (22-25 lbs./ft.)

KAS8569Extra Long 9/16” Wrench for Bendix® Slack Adjuster• Used for brake adjustment on heavy-duty trucks

equipped with Bendix slack adjusters• Extra deep 9/16” hex allows greater reach to

recessed adjusters

LTi890Truck Brake Spring Tool• Easily connects rear drum brake return springs• Slotted ends on tool always hold spring at correct work angle• No need to leverage tool against a solid surface during spring

installationFast, easy, and safe

OTC5081Air Brake Spring Tool• Replacing brake shoes on heavy-duty tractors and trailers is now a snap

thanks to OTC’s new No. 5081. This little tool eliminates unsafe methods, grip wrenches, pry bars, or screwdrivers to unhook and reconnect the two “Q” brake shoe retaining springs.

• Wt., 1 lb., 4 oz.

OTC5038Brake Anchor Pin and Bushing Service Set• No need to remove the bearing

hub assembly to replace pins and bushings on 16-1/2” S-cam trailer and tractor “Q” brake systems

• Special tooling and C-frame press get you past the hub assembly. Quick and professional without damaging other parts

• Includes everything for removal and replacement

OTC5052Brake Slack Checker• This tool enables you to quickly check the brake adjustment

on class 7 and 8 trucks and trailers having S-cam brakes• Features a sturdy four position handle to provide the

leverage you need at the proper angle• Works on manual or automatic slack adjusters

OTC5055Slack Adjuster Puller• Puller fits many manual types

OTC5056Slack Adjuster Puller• Works on Rockwell, Haldex, Gunite, and Bendix automatic adjusters

OTC7069AHeavy Duty Brake Spring Pliers• Save time and effort when removing and installing return

springs on the brake shoes of heavy duty vehicles• Specially designed pliers works for hydraulic wedge-type

and “S” cam air brakes• Its 26-1/4” length gives the leverage easily, and the huge

jaw opening accommodates even the widest brake shoes• Comes with replaceable tips

OTC5054Air Brake Service Kit• Works on manual or automatic slack adjusters• This kit has the tools needed to remove slack adjusters and push-rod clevis

pins used in the S-cam brake systems of class 7 and 8 vehicles

Kit includes: OTC5055 and OTC5056 slack adjuster pullers, OTC5057 brake clevis pin press, and a plastic storage case.

OTC4241Kingpin and Brake Anchor Pin Pusher without Hydraulics

OTC7402Universal Outside Thread Chaser• The die cast alloy V-pad will not damage the threads• V-pads and dies can be replaced when worn out• Capacity: from 1 1/4” to 5” O.D. • Weight: 2 lbs., 13 oz.• Thread chaser, complete with 6 dies: threads per inch - 4,

5, 6, 7, 71/2, 8, 9, 1 0, 11, 11 1/2, 12, 14, 16, 18, 20,24

transmission tools

specialty tools

$265.36

$231.73

$53.99

$27.95

$41.10

$99.59

$412.00

$53.79

$521.90

$195.75

$195.75

$145.59

$1,099.99

$114.25

$56.27

40

KAS12286pt Axle Nut Socket - 2-9/16” (Round)

KAS12456pt Axle Nut Socket 2-3/4” (Round)

KAS12042-9/16” Axle Nut Hex Socket• Constructed with high grade steel • Lifetime warranty• Heavy duty weld on drive bar • Black E-coat finish for corrosion protection

Part Number 6pt

KAS1201 6pt Axle Nut Socket - 2-3/32”

KAS1229 6pt Axle Nut Socket - 54mm







KAS1206 6pt Axle Nut Socket - 3”






Part Number 8pt






OTC7077Axle Stud Cone Pliers• Now you can easily remove the tapered cone from studs

used on medium- and heavy- duty truck rear axles• This specially designed pliers gives you the leverage

needed to expand the cone and remove it from the stud for axis removal

KEN7326New Super HubShark System• Updated HubShark has greater capacity to handle larger bearings• Kit now includes a 3/4” Center Screw to accommodate smaller import axles• Now includes a thrust bearing to reduce friction between

the main screw and the body, allowing smoother bearing removal and installation• Per your request, HubShark has been updated to meet

your most challenging bearing requirements

KEN34549Dual Wheel Separator• Innovative “One-piece” Pusher won’t fall apart during use• Pusher is ball bearing-driven for near-zero turning resistance• Pusher is heat treated for long-lasting strength and durability• Powerful 1-1/8” diameter x 11 threads for years of reliable service• Includes two pullers to cover large and small dual wheel applications• Components have black oxide or bright nickel plating finish for rust

and corrosion resistance

OTC4295Wheel Stud Service Kit• Remove and install 10 studs in only

10-15 minutes (compare to 20-30 minutes for more expensive competitive products)

• Can be powered with an impact wrench• No need to remove hub from vehicle

Includes: large C-frame with forcing screw, one set of installation adapters, two separate adapters for removal, extension adapter for increasing the range of travel, blow-molded storage case, and power thread lubrication.

3/4” Drive 6 Point Pinion Locknut Sockets• Socket is built to have the correct clearance for yoke and locknut

assemblies on a variety of truck transmissions and differentials• Socket has 3” of usable depth and is 4” long• This socket is designed for use with 3/4” square drive manual tools only• Resist rounding out

OTC1976 - 2-1/8”

OTC1977 - 2-1/4”

OTC1979 - 2-5/8”

OTC1980 - 2-3/4”

GRE83707 Piece 3/4” Drive Truck Pinion Locknut Set• Extra-thin wall deep length impact sockets for removing/

installing transmission and differential end yoke locknut’s• Can be used on a wide variety of trucks• Use caution and follow the manufacturer’s

recommendations when servicing these parts• Lifetime Warranty

Set contains: 2”, 2-1/8”, 2-1/4”, 2-3/8”, 2-1/2”, 2-5/8” and 2-3/4”

$26.48

$27.55

$22.90

$25.22

$23.88

$26.48

$26.48

$26.48

$26.48

$27.55

$26.48

$30.36

$23.15

$30.36

$31.15

$26.48

$31.15

$30.36

$26.48

$27.22

$23.88

$26.48$44.59

$667.57

$227.85

$389.99

$140.05

$104.05

$104.05$140.05

$440.25

41

CHAOF12 Piece Oil Filter Plier Set• CHA212 - Oil Filter Pliers: Capacity 2-3/4” - 4-1/4”• CHA215 - Oil Filter Pliers : Capacity 2-1/2” - 5-1/2”• Channellock blue comfort grips

LIS509503-5/8” to 6” Truck and Tractor Oil Filter Pliers • Two-position, slip-joint handle produces a big range• Overall range 3-5/8” to 6”• Sure grip teeth prevent slipping • Cushioned handles add comfort

LIS50720Mega Gripper Filter Pliers 3” to 5-1/2” • Two-position, slip-joint handle easily

adjusts to fit different size filters• Dual durometer non-slip grip• 11” / 14” overall length. The jaws

open from 3” to 5.5” wide

Oil Filter Pliers

CHA212

Part Number Size

CHA212 4-1/4” - 108mm

CHA215 5-1/2” - 140mm

CAL291 3-1/4” - 7”

CAL302 2-1/4” - 5-3/4”

IPA7899 1.5” - 12”

CAL291

IPA7899

CHAOF1

Part Number Size Style

LIS53250 4-1/8” - 4-1/2” Swivel

LIS54200 4-5/16” - 4-3/4” Cummins & Detroit

Diesel

LIS54300 5-1/4” - 5-3/4” Caterpillar

Swivel Style Oil Filter WrenchesLIS53250

DOWI25HDC25 Gallon Self Evacuating Oil Drain• Uses air pressure to empty tank• Removeable 6 ft. Quick-

Disconnect discharge hose• 16” deep drawn offset funnel with

expanded metal screen• Swivel base on funnel makes

positioning easy

Height adjusts from 50” to 70”. Heavy-duty 4” casters provide stability and mobility. 25 gallon steel tank. All metal funnel. Built-in sight glass shows fluid level in the tank.

Freight Delivery Only

LIS1743218 Gallon Oil Lift Drain • Translucent jug holds 18 gallons

and will not warp with hot oil• Rolls easily with four heavy-duty 2 1/2” wheels• Metal tubes extend working area

from 36 1/2” to 77”• Drains from the bottom with a brass drain valve• Large 15” funnel has a built in

strainer to catch drain plugs

18 Gallon Oil Lift Drain has a quick release and height adjustment. Do your oil changes without making a mess on the floor.

LIN3626Black Polyethylene Used Fluid Drain, 26-Gallon• Durable, lightweight, corrosion resistant polyethylene• Durable 4” swivel casters and 10” fixed-axle wheels• Large 17” diameter offset funnel rotates to catch streaming

oil and includes a removable filter screen• Funnel height adjusts from 50 to 75 inches and a 3/4” male

camlock style connector extends from the top of the tank

LIN3627Used Antifreeze Drain Green Polyethylene, 26-Gallon

LIN363525 Gallon Used Fluid Drain• Convenient tool tray for storing vital tools and drain plugs,

tank-mounted clip and handle hook to secure discharge hose• 15” (380 mm) diameter drain bowl with removable filter

screen and 24” (610 mm) wide-mouth funnel extension• Welded steel tank supported by

heavy-duty 4” (100 mm) swivel casters and 6” (150 mm) fixed-axle wheels

• Funnel height adjusts from 51” to 76” (130 to 195 cm)

• 7’ long nylon-reinforced discharge hose with steel J-hook and tethered drip plug

• LTL Shipping Only

oil change tools

fluid handling

$56.95

$48.00

$47.13

$645.15

$213.50

$670.95

$670.95

$599.99

$79.17

$41.79

$30.99

$26.67

$32.09 $13.85

$13.39

$10.59

42

DOWJDI-17PLP17-Gallon Poly Low-Profile Oil Drain• T-Handle folds for handy storage• (4) 5” heavy-duty casters• Expanded metal shield• Gravity drain valve• Lightweight and dent resistant

DOWJDI-17PKPump Kit for the DOWJDI-17PLP 17 Gallon Poly Low Profile Oil Drain• 110v Electric Pump• 8’ Evacuation Hose• All Necessary Fittings to

Assemble to DOWJDI-17PLP• Allows for easier evacuation of fluid• Complete pump kit

DOWJDI-EKEvacuation Kit for DOWJDI-LP4• Includes all parts necessary to empty

DOWJDI-LP4 with Air Pressure• Includes air regulator and safety valve, 10 ft.

hose, drain plug and mounting hardware• Drain not included

LIN3669Low Profile Truck Drain with Electric Pump• Includes 120v electric discharge pump for fluid evacuation• Low profile design can be easily positioned under high-clearance

vehiclesLarge 17 gallon (65 liter) capacity reservoir• Reservoir molded of high-impact polypropylene and four large 4” (100 mm)

diameter swivel casters• 6 ft (1.8 m) long discharge hose with 3/4” male camlock connector for external pump

Collection of used fluids including motor oil, transmission fluid, and coolant from under high clearance vehicles.

LIN3667Low Profile Truck Drain with Manual Pump

LIN3665Low Profile Truck Drain

LIS1920260 Quart Low Profile Truck Drain with Lid• For large capacity crank cases or radiator systems• The drain holds 60 quarts and is equipped with four rollers and

a handle for transport and easy positioning under trucks• Cover and curved side design help keep

oil from spilling during movement• Convenient handles and pour spout facilitate oil evacuation• Supersedes 19122

DOWJDI-LP4Low Boy Oil Drain 17 Gallon Capacity• 48” long x 25” wide x 9 high • 9 low profile• 6” casters • Gravity or pressure drain

LIS1792230 Quart, Heavy-Duty, All-Purpose Plastic Drain Tub• For draining radiators, crankcases, transmissions,

differentials, etc. on cars and trucks• Designed for easy pouring and disposal• The apron facilitates washing and sorting parts• Dimensions 33 in. x 22 in. x 8 in.

$406.00

$270.65

$182.99

$555.99

$285.69

$363.87

$460.59

$589.99

$48.99

43

LIN4417Grease Pump Assembly - #120 Drum• 40:1 ratio professional quality pump

assembly for the automotive repair shop• Includes 7’ hose, control valve, universal

swivel for easy operation, drum cover• Flexible follower plate for positive prime• 4 caster band-dolly for easy mobility

around the shop

LIN24243:1 55 Gallon Drum Series 25 Pump• Motor oil, ATF, gear lube and other fluid lubricants• Balanced double-acting pump

design provides uniform output and stroke for less pulsation

• Lightweight, corrosion–resistant zinc head casting design incorporates uniform wall thickness

LIN6917Air-Operated Portable Grease Pump Package• Lincoln’s time tested 50:1

double acting grease pump is at the heart of the package

• High volume and pressure to handle additional hose length and/or adapt to hose reel

• Smooth, easy to use and quiet for improved environment, ergonomics

LIN917Air Operated Grease Pump• Will dispense 45 ounces or 80 cubic inches

of NLGI 0-2 grease per minute at 150 PSI.• Assures positive prime at lowest temperature• Drum cover 46007 finished in Lincoln red;

roll-a-round base 80895 base in black; air motor cover in white

• Height 43-1/8”• Base 17” square

Drum not included.

LIN9917Heavy Duty PMV Grease Pump with Caster Base for 50:1 - 120 lb. Drums• Twice the output of standard pumps,

for longer life on the same job• Smooth and quiet, improves the

environment for the shop as well as customers

LIN9989Heavy Duty PMV Grease Pump for 50: 1, 25 - 50 lb.• Twice the output of standard pumps,

for longer life on the same job• Smooth and quiet, improves the

environment for the shop as well as customers

• Reduced cost of ownership for the life of the pump

LIN1387Premium 3-Vane Rotary Fuel Pump with Hose• FM APPROVED• Fluid Types: Gasoline, Diesel, Kerosene,

Coolant, Non-Corrosive materials, Medium viscosity petroleum based fluids, hydraulic oils, ATF

LIN1385Premium 3-Vane Rotary Pump without Hose• Graphite Three-Vane Design for exceptionally

smooth fluid flow for no-splash fills• High-tolerance micro-finished bore and vanes

provide outstanding pump life

LIN1385HPremium 3-Vane Rotary Pump with Hose• Internal-check prevents drain-back assures immediate restart• Approx 1 Gallon per 12 Revolutions• Self Priming / Outstanding vacuum

LIN1550Heavy Duty 12V DC Fuel Transfer Pump, 15 GPM• Safely transfers Diesel, Kerosene and

Mineral spirits, delivering up 15 gal./min• Three-piece telescoping pick-up tube

supports a very wide range of tank depths• Pre-wired electrical box allows for easy

set-up. Fully serviceable. 18 ft. (5,5 m) cable for operator convenience

• Weatherproof cast-iron design with high-flow 1” inlet and outlet

• 360 degree locking 2-inch bung for perfect nozzle positioning

KTI73993Lever Action Bucket Pump 5 Gallon Pail• Lever action bucket pump fits 5 gallon pails

• Comes complete with 12” drum cover and

4’ PVC hose with steel spout

• Designed for transferring transmission dif-

ferentials and heavier oils

• Delivers 2.14 oz (60 ml) per stroke

LIN4489Value Series 40:1 Single Acting Grease Pump for 25-50 lb. Pail • Includes 40:1 value series pump, pail cover,

handle, high-pressure control valve, universal swivel, coupler, 7 foot connecting hose, fol-lower plate

$1,205.00

$975.25

$905.07

$929.19

$899.00

$174.15

$49.99

$219.55

$1,021.99

$272.75

$484.29

$820.00

44

FILFR112Complete Hand Rotary Pump• 10 gallons per 100 revolutions• UL approved • Cast iron rotor• Can be used to pump in reverse

Cast aluminum Fill-Rite pump provides smooth, continuous transfer of medium viscosity liquids, as well as oil, gasoline and diesel fuel. Improved seal keeps water out. Built-in check valve and strainer. Pump easily mounts to a standard drum with 2in. NPT. Anti-siphoning device, hose with static wire and a 22” to 40” telescoping suction pipe. Padlockable pump can be set up for reverse flow and is adaptable for drums, kegs or storage tanks. U.S.A.

FILSD62Rotary Vane Hand Pump • 2” NPT threaded bung adapter • 1” polymer suction pipe adjusts

for 15 to 55 gallon drums • Smoothly pumps medium-viscosity

oils, diesel fuel and non-corrosive fluids

FILFR152Piston Style Hand Pump • Stainless steel inner liner• “Easy mount” 2” tank adapter• Pump flow can be reversed by

rotating piston 180° • Anti-siphoning device

FILFR1210G12 Volt DC Pump with Manual Nozzle• Up to 15 GPM • 1/4 HP

motor• Diesel/Gasoline/Kerosene/E15/

BD up to B20• 2” Threaded base for tank

mounting• Heavy duty cast iron

construction

FILFR1612 DC Power Cast Iron Rotary Vane Pump• Self Priming• Includes battery cable with clips and 30 amp fuse• Inlet and outlet size ¾” NPT• Compatible with Diesel and Antifreeze

This light duty rotary vane transfer pump is portable and self priming. The pump is cast iron and produces a flow rate of 10 GPM. It is powered by DC voltage. Battery cable with clips is included. The pump is compatible with diesel and antifreeze fluids.

LIN5805Impact Fitting Cleaner• Clears hardened grease

from fittings and joints

• Eliminates the need to disassemble

joints or replace fittings

• Hardened Piston, steel drive cylinder,

spare drive seals and safety shield for hand

• Comes with optional high pressure flex

hose and Lincoln’s 5852 coupler

• Comes in plastic blow-molded storage case

IPA7862H Grease Joint Rejuvenator® Professional Model• Loosens hardened grease in joints

• Opens clogged grease fittings

• 5” flex hose for hard to reach fittings

• Limited Lifetime Warranty

• Blow molded storage case

LIN1550Heavy Duty 12V DC Fuel Transfer Pump, 15 GPM• Safely transfers Diesel, Kero-

sene and Mineral spirits,

delivering up 15 gal./min

• 18 ft. (5,5 m) cable for operator

convenience

• 13 ft. (4 m), commercial-grade,

kink-resistant, anti-static hose

LIN1340Lever Action Barrel Pump• Telescoping tube fits 16 - 55 gallon drums• Delivers 14 oz. per pump• Transfer non-corrosive automotive fluids

$46.15

$61.95

$201.69

$449.00

$206.39

$161.99

$49.75

$484.29

$55.89

45

LIN5900

LIN279092

LIN279091

LIN279091 - Lube Trolley Package for Grease• Complete package includes trolley, pump, 30-foot (9 m) reel assembly,

control valve and swivel, air control with filter/regulator/gauge,

connection hose and fittings

LIN279092 - Lube Trolley Package for Oil• Complete package includes trolley, pump, 30-foot reel (9 m) assembly, totalizing meter,

air control with filter/regulator/gauge, connection hose and fittings

LIN279092 LIN279091

PREMIUM LUBE TROLLEY PACKAGESEnables portable oil or grease dispensing from drums.

Designed for convenience and portability, Lincoln’s premium lube

trolley package comes complete with all components needed for

dispensing oil or grease directly from 55-gallon (208 l) or 400-pound

(181 kg) drums. The lube trolley is suitable for servicing a full range of

vehicles, as well as industrial and machinery processes.

Lube trolley advantages:

• Packaged product with all necessary components

• Durable, heavy-duty construction

• Ability to dispense lubricant directly from 55-gallon

(208 l) (oil) or 400-pound (181 kg) (grease) drums

• Easily maneuverable on uneven surfaces in shop or factory

• Makes dispensing possible without installed

overhead reels or bench tanks

• SKF and Lincoln resources ensure maximum

reliability and lowest cost of ownership

POWERLOCKCOUPLERDesigned to make equipment lubrication quicker and

easier. The coupler provides easy on/off action and

reduces grease loss at the fitting. Its flexible, nylon sleeve

offsets pressure applied at the lever and protects the

hose from unnecessary wear

• Lever-activated for quick attachment

and release from fitting

• Comfortable, ergonomic design with protective grip

• Optimizes lubricant delivery, Less grease bypass

• Secure attachment enables singlehanded

use of grease gun

LIN5900

46

FILRD812NP12 Volt Bung Mounted Fuel Transfer Pump with Hose and Nozzle• Pumps up to 8 GPM

• Pumps gasoline, Diesel, Kerosene and E15

• Kit includes suction pipe and 8’ discharge hose, 23-41 telescoping

suction tube, nozzle boot, bung tank mount adapter and 10’ quick

connect power cord with alligator clips

FILFR3210B12 Volt Fuel Transfer Pump• 25 GPM

• Fastest DC fuel transfer pump on the market

• 12V, DC 1/2 hp, thermally protected motor

• Self-priming, up to 12’ of lift

• Heavy-duty cast-iron construction

Includes a 1” ultra high-flow automatic nozzle

and an 18-foot,1” hose with a static wire.

FILSD120212 Volt Cast IronDC Fuel Transfer Pump• You get the ruggedness of cast iron

and the portability of DC power

• Delivers up to 13 GPM

• Designed for tank or barrel mounting

• Applications: diesel fuel, gasoline,

kerosene, and mineral spirits

FILSD602G115V AC Pump with Manual Nozzle• 13 GPM (49 LPM)

• 1/4 HP Motor

• UL/cUL listed pump and motor

• Heavy duty cast iron construction

• Diesel/Gasoline/Kerosene/E15/BD up to BD20

This standard duty pump delivers up to 13 GPM/49 LPM of fluid. The SD602 is designed

for tank or barrel mounting. One Year Warranty. 10´ hose, nozzle and 1” adjustable

polymer suction pipe. 2” NPT, no tank adapter needed. Thermally protected, 1/4 HP

UL/cUL listed explosion-proof motor. Positive displacement, rotary vane configuration.

Ball bearing construction, no lubrication required. 30-minute duty cycle Pump may be

padlocked. Rain proof. Self priming.

FILFR1614DC Power Cast Iron Rotary Vane Pump• Includes battery cable with clips

• 8’ of 3/4” hose - Pick up tube

strainer and plastic ¾” nozzle

• Compatible with Diesel and Antifreeze

• 10 GPM flow rate

This light duty rotary vane transfer pump is portable and self priming. The

pump is cast iron and produces a flow rate of 10 GPM. It is powered by DC

voltage. Battery cable with clips is included. As a complete pump kit it also

has 8” of 3/4” hose, pick up strainer, for the inlet and outlet, and a plastic

3/4” plastic nozzle. The pump is compatible with diesel and antifreeze fluids.

KTI72210Lever Transfer Pump 15-55 Gal. Drums• For use with DEF, antifreeze, detergents,

windshield fluids, heavy oils, etc

• 1 Year Warranty

FILFRH075203/4” X 20’ Fuel Tranfer Replacement HoseThis hose is for the transfer pump that uses a 3/4” fitting. The extended

length adds a great benifit. The standard hose is 12 feet long. With the 20

foot reach the user has the ability to get to the hard to reach locations for

refueling. A wonderful upgrade hose!

SUR100032 oz. Sure Shot® Pressurized Sprayer• An inexpensive way to apply bulk chemicals• Uses compressed air, instead of flammable or dan-

gerous propellants, and it’s reusable• Use with oil & solvent based materials• No water based materials

LIS1723210” Tall Translucent Right Angle Funnel• 10” Tall Translucent Funnel with a 6-3/4” offset from center of mouth to

center of spout for hard-to-reach applications• Useful for adding brake fluid to master cylinders on mini-vans, adding

gear lube to differentials, filling the DEF reservoir on GM Duramax diesels as well as other applications

• The funnel mouth is 3.5” O.D. and the spout is .7” O.D.

LIS1823210” Tall Translucent Right Angle Funnel• Offset Spout for Hard-To-Reach Applications Like

Adding Brake Fluid to Master Cylinders, Gear Lube to Differentials, Fluid to DEF Reservoirs and More

• 10” tall translucent funnel with a 6-3/4” offset from center of mouth to center of spout

$854.90

$41.29

$389.52

$451.39

$214.29

$369.00

$99.99

$55.65

$12.77

$19.07

47

LIN188420-Volt Lithium Ion PowerLuber Kit (Dual Battery)• LCD identifies: Empty Cartridge, Loss of Prime,

Grease Output and Blocked fitting• Lithium Technology, Powerful, Efficient and Long -Lasting• Built-in LED light illuminates dimly lit areas• Electronically controlled two-speed motor• Stable 3-point stance keeps the tool upright and within reach• Balanced, lightweight design

LIN1162Fully Automatic Pneumatic Grease Gun• 30” high-pressure hose with coupler

and attachment clip• Air operating range 40-150 psi, and has greasing capabilities of 6000 psi

The pump ratio: 40:1 at 150 psi Maximum Grease Pressure: 6,000 psi (414 bar) Air Pressure Range: 40- 150 psi (2.8 - 10.3 bar)

LIN1134Extra Heavy Duty Pistol Grip Grease Gun• Same features as LIN1133 except with

Extra Heavy Duty Pistol Grip and 6” tube

LIN1147Heavy Duty Lever Gun• Same features as

LIN1142 but with 18” whip hose

LIN1142Heavy Duty Lever Gun• Rugged cast iron pump head• Jam proof toggle mechanism• Capacity: 16 oz. bulk or 14.5 oz cartridge

LIN184418 Volt Cordless Grease Gun with 2 Batteries• New 18-volt high-capacity

battery delivers up to 10 grease cartridges

• 2-speed transmission provides high-volume or high-pressure output

• High-strength composite body and casting provide outstanding durability without weight penalty

• Dual overload protection

LIN124412 Volt Cordless PowerLuber® Grease Gun with Battery Kit• Powerful 12 volt motor• Planetary gear drive• High capacity 12 volt NiCad battery• Machined and hardened piston

Kit includes: 110 volt fast charger, (2) 12 volt Ni-Cad rechargeable batteries, 30” flex hose with spring guard and custom carrying case.

MLW2446-21XCM12™ Grease Gun Kit• Delivers over 8,000 PSI for heavy duty applications• Superior run-time - up to 7 grease cartridges per battery charge• M12™ XC LITHIUM-ION Battery Pack - 20+ Tools in the M12™ Cordless System• M12™ Grease Gun Kit Includes: grease gun, (1) XC Battery, charger and carrying case.

MLW2646-21CTM18™ Cordless 2-Speed Grease Gun Kit with 1 Battery • Industry leading 10,000 PSI max operating pressure• New to world precision through pre-set grease c ounter lbs• Best in class 48” flexible hose

The kit includes (1) M18 battery and the new multi-voltage charger, so you can charge all M12 and M18 lithium-ion batteries with one charger.

$285.99

$419.99

$105.19

$368.59$29.85

$51.75

$39.95

$349.99

$285.70

48

• Durable fabric and rugged construction won’t rip or tear; tough enough to refill and reuse

• Designed just for trucks! Packed with PIG® Absorbents and essential spill supplies for cleaning up oil, gas and other vehicle fluids

• Hi-viz yellow bag with reflective striping is easy to find; increases driver visibility and safety during spill response

NPGKIT626PIG® Truck Spill Kit in Duffel Bag• Compact duffel bag design fits in the cab

or inside a long, narrow external compartment of a truck or other vehicles

• End strap and carrying straps make it easy to pull bag from its storage space and take supplies to the spill

Kit Includes:• (15) 15” W x 20” L PIG® Absorbent Mat Pads • (3) 3” x 48” L PIG® Blue Absorbent Socks • (5) 18” W x 30” H Polyethylene Disposal Bags• (1) Collapsible Container• (1) Economy Goggles• (1) 3.25” x 1.75” H PIG® Plug-N-Seal® • (1) Apron No-Freeze Patching Paste • (1) Lightstick• (1) 13” L Showa-Best Chem Master(TM) • (1) Instructions Neoprene Gloves

NPGKIT622PIG® Truck Spill Kit in Stowaway Bag• Space-saving, suitcase-style spill kit stashes

behind or underneath your truck seat to keep you prepared for spills on the road

Kit Includes:• (40) 15” W x 20” PIG® Absorbent Mat Pads • (3) 3” x 48” PIG® Blue Absorbent Socks • (2) 3.25” x 1.75” PIG® Plug-N-Seal® • (5) 18” W x 30” H Polyethylene Disposal Bags • (1) Apron• (1) Economy Goggles No-Freeze Patching Paste • (1) Lightstick• (1) 13” Showa-Best Chem Master(TM) • (1) Instructions Neoprene Gloves • (1) Collapsible Container

DOWFC-25GC25-Gallon UL Listed Gas Caddy • Combination vent and fill cap• UL Listed pump • Fill level gauge

LIN367525 Gallon Fuel Caddy • Large capacity 25-gallon heavy-duty

welded steel tank• 2-way rotary pump dispenses or extracts

fuel at a rate of 1 gallon per 12 revolutions• Easy-to-read sight gauge clearly indicates

fuel volume in tank• 7’ (2.1 m) wire-reinforced fluid transfer

hose with anti-spark tip and internal ground wire

gas caddies

$185.53

$142.63

$732.50

$588.79

49

DIESEL

DOWFC-P30A-UL30-Gallon UL Listed Steel Gas Caddy - Air Operated• UL Listed and complies with OSHA guidelines• 30-Gallon capacity steel tank • 4-way directional valve• For use with gasoline, diesel, kerosene, bio-

diesel and transmission fluid

DOWFC-25PFC25-Gallon Poly Fuel Cart• UN/DOT and Transport Canada Approved

• 25 gallon high density polyethylene tank

• Easy-to-use molded handle

• Fills in horizontal position

OTC5044Self-Adjusting Clutch Rotating Tool• This handy tool replaces the self-adjuster

mechanism on Spicer self-adjusting clutches, allowing you to manually adjust them with a wrench or socket

• 3/4” hex drive

OTC7028Clutch Adjusting Wrench for Spicer Clutches• Adjusting wrench• For internal adjustment of multiple lever

and angle- spring clutches.

OTC7057U-Joint Remover Tool Set• Works on 16N, 17N, 18N and 1710

series U-joints and spicer 1600-1610 to 1180 series U-joints

• Includes plastic storage box, No 1036 2-jaw puller and instructions

• Weight: 16 lbs., 3 oz

Truck Clutch Alignment Shaft O.D. Pilots • Designed for use on heavy duty single, two-plate,

push/pull, manual, and self-adjust clutches• Shaft is constructed of lightweight fiberglass-reinforced

nylon that won’t hang up in clutch disc splines• Rugged and will easily support the weight of heavy pressure plates

OTC7073A - 1-3/4”

OTC7074A - 2”

OTC7075Transmission Output Shaft End Yoke Remover• Will remove end yokes from 600/1610-1810 series transmissions• Works on Fuller twin-countershaft transmissions• Lifetime limited warranty

OTC7071Differential Housing Spreader• Works on Dana axle models 30

through 70 • Weight: 34 lbs.

Removing and installing differential ring gear assemblies is typically a difficult, time-consuming chore, unless you’re using the differential housing spreader. This device uses mechanical screw power to spread the housing, allowing easy removal of the differential assembly while eliminating damage often caused by makeshift methods.

OTC5190AHeavy Duty Universal Joint Puller• Designed to fit all Class 7 and 8 trucks including

a wide variety of drive-lines from Spicer and Meritor• Improved material and heat treat on major components• Larger diameter threaded shaft• Improved strength and durability• Compatible with: Spicer 1610, 1710, 1760, 1810,

1880, SPL 140, 170, 250. Meritor 16, 17, 18N, 1710, RPL20, 25

OTC5191Heavy Duty Bearing Cup Installer• Three individual adapters press bearings

to the manufacturer’s recommended depths• Adapters fit Spicer SPL 140, 170, and 250

series drivelines• Pre-determined “installed heights”

specified by the manufacturer are engineered into the components to ensure correct installation every time.

• For use on quick-disconnect universal joints only

Installs bearing cups quickly and accurately into the Dana/Spicer SPL “Life Series” quick-disconnect universal joints, one at a time.

OTC5192Heavy Duty Bearing Cup Installer• Fits Driveline Series

1610 to 1880

OTC74901/2” Drive U-Joint Remover Tool• For use with 1/2” drive impact wrench• Easily removes stubborn heavy duty U-joints on Dana

and Rockwell® driveshaft assemblies

gas caddies

$60.39

$476.85

$3,765.00

$55.65

$43.09

$542.75

$57.50

$148.45

$263.65

$96.45

$284.00

$349.99

$615.00

50

ALC4041148” x 24” Steel Floor Model Cabinet Blaster with Foot Pedal• 100 cfm dust collector included with all steel cabinets• Heavy duty 14 gauge steel - welded seams• Full width top drawer• High quality lined 24” gloves

ALC4040336” x 24” Top and Side Door Foot PedalAbrasive Blasting Cabinet• 100 cfm dust collector included with all steel cabinets• Heavy duty 14 gauge steel - welded seams• Full width top drawer• Rubber gloves included

Work area: 36”W x 24”H x 24”D. Height: 60”. Cushioned foam armholes.

ALC40391Plastic Floor Model Cabinet Blaster • Rubber gloves included• Recommended use with shop vacuum (not provided)

• Rear support frame

is made of tough LDPE polymer. It has a unique clam shell design, with a top

construction, steel angle support legs, and a window lens: 15-1/2” x 33”. Made with quality and durability to last!

ALC41500Triple Door, Foot Pedal Cabinet with Dust Collector• Top door and 2 side doors• Dust collector mounted on the rear of the cabinet• Foot pedal operated • Heavy duty blast gun • Easy assembly

This cabinet has a full width top door and two side doors for easy access. It has a 90 cfm dust collector mounted on the back of the cabinet. It is foot pedal operated for more control. It has a heavy duty blast gun with long lasting nozzles. It can be assembled easily with nut and bolt assembly. No holes to drill, just use a screwdriver to

ALC4041360”W x 24”H x 24”D Blaster Cabinet with Double Doors and Foot Pedal• 100 cfm dust collector included• HD 14 gauge steel with welded seams• Full width top door• High quality lined 24” gloves• Cushioned foam armholes

$896.49

$2,095.00

$1,939.00

$1,799.00

$1,509.00

51

OTC189625 Ton Capacity Air/Hydraulic Automotive Oil Filter Crusher• Crushes automotive and heavy-duty

filters up to 15-1/4” long and 6” diameter • Filters are reduced to 20 percent of

original size, with 95 percent of residual oil removed

• Automatic cycle feature lets you load the filter, push a button, and walk away

• Powered by 2 hp electric/hydraulic pump, 230 volt, 20 amp, 60 cycle,

single phase, 3,450 rpm• Has 2-gallon reservoir

DOWHDC150Heavy-Duty Truck Filter Crusher• Heavy-duty aluminum frame cabinet surrounds

the high pressure hydraulic hose for added safety and shields components from damage

• Handles filters 13” in height; 6” in diameter• Unitized construction allows for easy maintenance• Easy to operate: Load the filter and close the door

to activate the crushing cycle• Specially designed door channel prevents drips

and leakage, keeping oil in the chamber and not on the floor

OTC187725 Ton Capacity Heavy Duty Oil Filter Crusher• Handles the big filters (up to

6” diameter and 12-1/2” long) found in trucks, construction equipment, farm implements• Crushes filters to 1/4 of original size,

removing up to 95 percent of filter’s oil capacity

• Automatic cycle feature: load the filter, push a button, and walk away

• Air/hydraulic pump works on standard shop air (requires 9 CFM at 100 psi)

• Built-in floor stand (completely assembled)

BENRP20FCOil Filter Crusher• Save on disposal costs and

storage space• Fulfills EPA and other mandated

environmental standards• No mess design operates clean

and efficiently to lessen spill hazards

• Single control valve operation • Exclusive X-shape bevel in

press head pre-aligns filters for absolute vertical press

DOWFRL1Filter Regulator/Lubricator• Required with use of filter crusher• Easily attaches to air-fitting on wall

of either filter crusher

DOWFS400Deluxe Floor Stand• For AFC-100-94 and HDC-150-94• Accommodates a 16-gallon drum• Measures 28”W x 23”D x 38”H.

OTC182110 Ton Capacity Air Operated Oil Filter Crusher • Crushes up to four automotive filters

(3-7/8” diameter x 9” high) at one time, in approximately 20 seconds

• Engineered and built for dependable operation• 100 percent air operation eliminates

electrical connections• Generous size of crushing chamber

easily accommodates the largest automotive spin-on filters

• Includes mounting stand, No wall mounting or time consuming installation required

$1,395.00

$525.00

$2,499.00

$7,129.00

$95.99

$4,326.00

$2,736.00

52

OMEHW93300C25 Ton Press with Accessory Kit• Excellent for bending, bonding

or straightening applications• Multi-position bed for work

height adjustment• Heavy steel welded construction• Includes hand winch for

easy bed adjustments• Includes 25 ton press accessory

kit and arbor plates

OMEHW9340155 Ton Shop Press with PA2000 Air Pump• Excellent for bending, bonding,

or straightening applications• Multi-position bed for work

height adjustment• Heavy gauge, welded steel

construction• Includes hand winch for easy

bed adjustments• Industrial grade rams and

hydraulic pumpsThe Hein-Werner HW93401 is an American Made 55 ton shop press with a powerful air motor. It is made from heavy gauge steel with all welded construction for years of dependable service in even the highest volume applications.

OTC184555-Ton Capacity Heavy Duty Press with Electric / Hydraulic Pump• Covered by OTC Lifetime Marathon Warranty®.• Hydraulic ram features 13” of stroke. • Includes single-acting ram No. 52380 with

13” stroke; No. 4044 electric/hydraulic pump; No. 9651 gauge; No. 303563 hose (3/8” ID x 8’); and pump mounting bracket.

OTC185155 Ton Capacity Economy Shop Press with Air/Hydraulic Pump• Hand-operated winch and cable mechanism adjusts

lower press bolster• Includes air/hydraulic pump• Includes hydraulic ram

with 6-1/4” stroke• Includes gauge, hose, and pump mounting bracket• Durable steel frame resists buckling and bending

OTC183425 Ton Capacity Shop Press• Tough, economical press is ideal for pressing rear axle bearings, piston pins, and much

more• Large 30” x 46” work area under ram makes positioning of even bulky work easy• Press bed is easily raised and lowered

by a dependable lifting mechanism• Press complete with air-driven No. 4020 hydraulic pump;

No. 9652 gauge; No. 21815 tee; No. 9768 hose and hydraulic ram with 6-1/4” stroke

OTC183325 Ton Capacity Floor Press with Hand Pump• 4002 hydraulic hand pump, 9652 gauge, 24815 tee, 9767 hose (1/4” I.D. x 6’), ram with

6-1/4” stroke, and 42733-WH2 ump mounting bracket. Floor space: 41-1/2” x 28”.

$7,999.00

$5,274.00

$6,129.00$4,518.49

$3,325.00

$3,379.00

53

ASTTS22AHydraulic Press - 20 Ton Capacity• Heavy duty return springs for

fast ram retraction• Reinforced head plate• Arbor plates included• Safety bypass valve assures

unit will not exceed rated capacity

The Astro Pneumatic Tool TS22A Hydraulic Press - 20 Ton Capacity is built with heavy duty return springs for fast ram retraction, and a reinforced head plate. This item includes arbor plates, and a safety bypass valve which assures the unit will not exceed its rated capacity. It meets ANSI standards for performance and safety.

INT850SD20 Ton Super Duty Shop Press• Ideal for heavy duty truck applications,

spring shops, industrial, or every day shops that find themselves in need of a step up from a regular duty press

• A movable press head assembly and included V-blocks add versatility to these work horses

• These come complete with foot operated air motor assist pin, press adapter kit and mountable/removable retracting guard for added safety

• Overall Dimensions: 35 in. W x 64 in. H Bed Depth: 7 in. Bed Width: 19.25 in. Throat Depth: 5.75 in. Throat Width: 10.75 in.

OTC184755-Ton Capacity Heavy Duty Press with Air / Hydraulic Pump• Includes single-acting ram No. 52380 with

13” stroke; No. 4022 air/hydraulic pump; No. 9651 gauge; No. 9781 hose (3/8” ID x 10’).

OTC187255-Ton Heavy-Duty Press• Includes double-acting ram with 13” stroke• Includes electric/hydraulic hand pump, gauge,

hoses, and pump mounting bracket• Covered by OTC Lifetime Marathon Warranty• Side-to-side positioning of ram allows full capacity pressing

along entire bolster length without buckling or bending.

OTC1854100-Ton Capacity Economy Shop Press with Electric/Hydraulic Pump• Includes hydraulic ram with 10” stroke• Includes electric/hydraulic pump, gauge,

hose, and pump mounting bracket• Covered by OTC Lifetime Marathon Warranty

$1,167.00 $550.65

$6,795.00

$10,550.00

$8,790.00

54

SUN574040 Ton Hydraulic Shop Press• Fully welded design for superior

durability and strength• Versatile sliding head adapts

to project needs• Includes bed plates and

bearing shield• Ideal for straightening, bending,

and removing/installing gears, bearings and bushings

SUN5740AH40 Ton Air/Hydraulic Shop Press• Sliding head allows for offset

pressing providing more room on one side if needed when pressing irregular objects

• Convenient air motor design eliminates need for pumping

• Proudly made in the USA• Capacity (tons) 40 @ 100 PSI;

Overall Height (in.)76.25; Base Width (in.)32; Vertical Throat Opening (in.)1 to 40; Throat Width (in.)32; Ram Stroke (in.)6.75; Ram Dia. (in.)2; Cylinder Bore (in.)3.5

SUN5740EP40 Ton Electric Hydraulic Shop Press• Proudly made in the USA• Top-of-the-line electric motor

design allows simple, hands-free operation

• Includes bed plates and bearing shield

• Capacity (tons) 40; Overall Height (in.)76.25; Base Width (in.)32; Vertical Throat Opening (in.)1 to 40; Throat Width (in.)32; Ram Stroke (in.)8.25; Ram Dia. (in.)2; Cylinder Bore (in.)6

SUN572020 Ton Manual Hydraulic Shop Press• Fully welded design for superior

durability and strength• Includes 3 piece punch kit, bed plates,

and bearing shield• Ideal for straightening, bending, removing/

installing gears, bearings and bushings

SUN5720AH20 Ton Air/Hydraulic Shop Press

MLK432650Universal Press Support Set• For mounting and demounting jobs• Safety alignment for workshop press

$2,499.00

$2,575.00

$5,449.00

$1,035.00

$1,149.00

$559.99

55

JET577172JET JPS-2A Pedestal Stand for JET Bench Grinders• Heavy-duty cast iron construction provides strength and durability• Wide stance base gives you a stable grinder workstation• Coolant tank and tool tray are on an adjustable platform for your convenience• Compatible with all JET Bench Grinders• 30.6”L x 20.5”W x 5.1”H. Weight: 51.81 lbs

JET577102JET JBG-8A 8” Industrial Bench Grinder• Sharpens, shapes, deburrs and removes material fast• Totally enclosed, pre-lubricated ball bearings• Heavy-duty guarded toggle switch on 8”• One-piece quick adjusting spark guards• Cast iron wheel guards and dust vents

The Jet 8-Inch Bench Grinder comes with industrial grade 36-grit and 60-grit 8-inch wheels for maximum working versatility. The 1-horsepower, 115-volt motor operates at 3450 RPM and will deliver plenty of power for heavy grinding. The grinder sits on a rubber foot to prevent unwanted movement and can be bolted down if desired for maximum stability. UL listed.

SUN5002A8” Bench Grinder with Light• Bright, flexible work light• Has two 8” grit wheels: coarse 36 and medium 60• Each wheel has protective spark guard and adjustable eye shield• Cast iron base for durability• Mounting holes and rubber feet make grinder easy to mount on a

stand or use on an approved worktable or workbench

Conveniently placed, easy to use on/off switch. Includes long 6’ power cord. Ball bearing construction for smooth operation. 5/8” arbor accepts standard wheel. UL ans CSA listed. Includes eye shields and tool rests.

DWTDW7588” Bench Grinder• Powerful 3/4 HP induction motor provides

superior power for industrial grinding applications• Rugged cast iron base and motor housing provide durability and prolong life• Motor runs at 3,600 RPM for high speed material removal• Precision-machined aluminum tool rests allow the user to

accurately position work• Rear exhaust ports in wheel guards for smoother operation

12-1/2” distance between wheels for longer and larger grinding applications. Amps 120V AC: 4; Spindle diameter: 5/8”; Tool length: 16”. Includes 36 and 60 grit wheels, eye shields, spark deflectors, tool rests and adjusting wrench.

JET577101JET JBG-6A 6” Bench Grinder• Totally enclosed pre-lubricated ball bearings • Heavy-duty guarded toggle switch on 8” and 10”• Rubber mounts prevent movement• UL listed

JET354401JET J-2530 15” Bench Model Drill Press, 3/4HP, 115V• Cast iron head• Large quill allows greater accuracy• Head casting features a permanently

lubricated ball bearing spindle assembly, using four heavy duty ball bearings in an enclosed quill for longer life

• Table tilts 45°• Large ground steel column diameter for

maximum head and table support

The J-2530 15” Bench Drill Press boasts a 3/4HP motor and tilting table. Simple yet powerful, the J-2530 has a cast iron head and large quill - allowing greater accuracy.

JET354402JET J-2550 20” Floor Model Drill Press• Cast Iron head • Large quill• Head casting features a permanently lubricated

ball bearing spindle assembly, using four heavy duty ball bearings in an enclosed quill for longer life

• Massive T-slotted production work table (Model J-2550 only)• Table tilts 45 degrees

The J-2550 20” Floor Drill Press boasts a 1HP motor and tilting table. Simple yet powerful, the J-2550 has a cast iron head and large quill - allowing for greater accuracy.

bench grinders

NOT AVAILABLE FOR SALE

IN CANADA


IN CANADA


IN CANADA


IN CANADANOT AVAILABLE FOR SALE

IN CANADA

$202.99

$192.99

$199.00

$129.00

$279.00

$649.00

$1,199.00

56

AMG3400-1600 lb. Capacity Hand Truck• 10” ball bearing wheels• Vertical or horizontal

loading• Easy storage, standing up

or hung from handle• 5 year warranty

ACR557Flat Bed Trailer Ratcheting Strap with Flat Hooks - 2” x 27’• High UV Resistance• High Capacity Polyester Webbing• Meets DOT and WSTDA Requirements

ACR557WHKFlat Bed Trailer Ratcheting Strap with J Hooks - 2” x 27’

JET140175JET PTW-2748 27” x 48” 6000 lb. Pallet Jack• 200 degree turning radius• Solid steel push rods never need adjustment• Articulating 7” poly-over-aluminum steer wheels

ensure continual contact with uneven floors• One-piece cast pump features high quality seals, hardened and chroma

plated ram and piston, top-of-stroke and overload safety bypass valves

LEWK1297AC/DC 225/125 60HZ Arc Welder• AC welding output range of 40-225 amps

and a DC welding output range of 30-125 amps• Easy to install. Comes with attached input power cable and plug.• Easy to operate with front mounted AC/DC polarity switch and

full range amperage selector switch for accurate and dependable procedure setting

• Traditional design provides long-life and low cost operation• Compact size allows for easy storage and handling

IDIMD-700Mini-Ductor™ II• Uses high frequency magnetic fields to instantly heat metal objects: Nuts/Bolts,

Bearings, Gears, Pulleys, O2 Sensors and more. Also remove: Hail dents, Vinyl Graphics, Side Moldings, and Emblems. Operates on 120 Volts, 1000 Watts

• Complete with Nut-Z-off coil, Bearing Buddy rope coil, 23” U-form coil, manual and case

• Heat metal objects near plastic components without need to shield them

welding


IN CANADA

$23.55

$25.05

$78.85

$499.00

$611.99

$857.00

57

Tradesman Vises• Wider Jaws provide greater clamping surface• Fully enclosed spindle and nut increases the life of the vise• Large anvil work surface• Precision turned sidebar• 360° swivel base with double lockdowns• Proudly made in the USA,

WIL1755 - 5-1/2”

WIL1765 - 6-1/2”

WIL7455” Mechanic’s Vise• Swivel base rotates 360° and has double lockdowns ensuring maximum stability• Powder coat paint resists scratches and provides a tough durable finish• Replaceable hardened steel top and pipe jaws• Large anvil work surface

WIL648HD8” Workshop Vise• 180° swivel base with lockdown allows for quick and easy positioning• Powder coat paint resists scratches and provides a tough durable surface• Designed for general duty applications • Large anvil work surface• Perfect for general clamping applications• 7-1/2” jaw opening• 4-1/2” throat depth• 180° Swivel base

Steel Bench VisesRugged all-steel vise is stronger than its cast iron counterpart. Vise features swivel base and large anvil space for hammering.10-year limited warranty. Jaws are not covered.

KTI64105 - 5” vise 5-1/4” usable jaw opening 27 lbs.



ATESL-STD-500550 LB / 50 GAL Capacity Spray Wash Cabinet• Automatic cleaning• 1,000 lb. load capacity• Includes parts basket and tree• 1 year warranty on material and

workmanship

The SWC-500’s 1000 LB capacity turntable is strong enough for any size auto or light truck engine.

ATESL-STD-7501250 LB / 53 GAL Capacity Spray Wash Cabinet• Includes parts basket and tree• 1,250 lb. load capacity• 1 year warranty on material and

workmanshipThe SWC-750’s 1,250 LB capacity turntable is designed to handle light diesel engines and engine parts for the truck repair and maintenance trade.

The cut-away sides under the door allow you to wheel your engine crane right over the table for easy loading and unloading. 19 high pressure spray jets quickly clean the greasiest engine components. Each cabinet includes a 60 minute timer and requires no harmful solvents — using only hot water and biodegradable detergents for an environmentally safe operation.

washer cabinets

vises

$634.89$729.29

$305.75

$153.41$190.50$249.32

$407.97

$3,495.00 $3,995.00

58

OME92450450 Lbs. Creeper Seat Tool Box• 450 lbs rated capacity• 4 full bearing 3” casters along with polyurethane wheels • (3) 12-3/4” x 7-1/2” x 2 -1/4” drawers

TRX3-100Foldable TopSide Creeper• Adjustable from 48” to 64”• Slip resistant steps• Durable powder coated steel frame construction

TRX3-700ProGear TopSide Creeper• New and improved design, safe and

productive engine access for 3/4 ton, 1 ton and up trucks

• Fully padded ergonomic sling deck, forms to your body

• Easy 15 minute assembly• Takes up 54% less space than the

original design• 17% higher reach, 18% wider steps, I

frame design give 20% more access under the hood

engineered products

TRX1-100ProGear Wide Body Creeper• Wide Body Deck for increased comfort and productivity• Low profile, with 5” rubber casters that roll over most common shop items• Contoured deck provides extra padding and lumbar support

OTC1734A Heavy-Duty Wheel Step• Fits heavy duty vehicles (Class 7/8)• 300 lb. capacity• Installs in seconds, adjusts to fit 22-1/2” to 24” wheel sizes• Non-skid platform surface

TRX3-120Topside Jr. Creeper• Heavy-duty steel frame• 10” x 13” padded chest rest• 300 lb work capacity• Height adjustable from 35” to 39”• Comfortable and safe• Weighs just 21lbs. for

easy transport from car to car

• Stores compactlyIt helps take the work out of the work place. The Topside Jr. protects the vehicle and your back when working over the engine compartment.

creepers & seats

$139.25

$450.19

$292.69

$135.50

$96.99

$93.75

59

IPA805236” Air Comb® Filter and Radiator Cleaner• Flush 90° air flow• 5x the air volume• Accesses hard-to-reach areas• Great for all air filters, radiators, and condensers• Extends filter life

IPA805348” Air Comb® Filter & Radiator Cleaner• Flush 90° air flow• 5x the air volume• Accesses hard-to-reach areas• Great for all air filters, radiators and condensers• Extends filter life

CRD63050Truckers Air Seat Blow Gun Kit• Nylon 12 ft hose, coiled, burst pressure up to 120 PSI• Zinc alloy blow gun, includes 2 replacement nozzle/heads with brass

• 1/4” NTA air line tee• Meets DOT Standards• SAE approved

pressure up to 120 PSI. The gun is nade from a Zinc alloy and the kit

line Tee. This kit meets DOT Standards and is SAE approved.

The IPA Air Comb® is a new type of blow gun that cleans radiators, condensers, air filters and much more in just seconds. After connecting the Air Comb® to your compressor the air exits the blow gun at a 90 degree angle, and covers a significant surface area as it is ejected from 5 ports. The result is a thorough and efficient cleaning tool which will not damage the delicate filter medium.

IPA9049MFleet Tank Sweeper• Removes water, rust,

dirt and sludge from fuel• 18 GPM pump (120V AC)• Inline water blocking

10 micron filter• Special wands included for

accessing bottom of fuel tank• Includes input and output hoses

LEGL8335FZFlexzilla® 1/2” x 50’ Retractable Air Hose Reel• Levelwind™ Technology for Flexzilla hose• Seven position locking bracket

• Adjustable hose stopper

• Latching mode switch

$1,949.99

$42.89

$47.99

$25.40

$298.57

60

KTI71002BluBird Air Hose Reel 1/2” x 50’• 1/2” x 50’ 300 PSI retractable rubber air hose

reel with lead in hose and 1/4” NPT fittings

LIN83754Air Reel - 50’ x 1/2”• Steel with 50’ x 1/2” rubber hose and ball stop

• Slotted mounting base - easy installation

• Spring powered automatic recoil

• 8 position ratchet system - easy positioning of hose

• 5 position adjustable outlet arm

• 300 PSI maximum pressure • 35 CFM maximum air flow

Air Reel Rubber Hoses• Spring powered automatic recoil• 8 position ratchet system• 5 position adjustable outlet arm

LIN83753 (50’ x 3/8” Hose)

LIN83754 (50’ x 1/2” Hose)

KTI71001BluBird Air Hose Reel 3/8” x 50’• 3/8” x 50’ 300 PSI retractable rubber air hose reel

with lead in hose and 1/4” NPT fittings• Smooth auto-rewind with locking• 12 point ratchet gearing system which

helps to lock at various lengths• Heavy duty steel construction with

powder coated, corrosion proof finish• Four rollers reduce hose wear• Horizontal and vertical wall mount options with

adjustable guide arm• 2-Year Warranty on hose reel and 10-Year Warranty

on attached hose to any manufacturing defects

Rubber Hoses Part Number

Hose Color

Hose Material

HoseDiameter

Length NPTWorkingPressure

BurstPressure

AdditionalFeatures

KTI72014 BluBird Rubber 3/8” 25’ 1/4” 300 PSI N/A 10 year warranty

KTI72015 BluBird Rubber 3/8” 50’ 1/4” 300 PSI N/A 10 year warranty

LEGHFZ3850YW2 “ZillaGreen” Hybrid Polymer 3/8” 50’ 1/4” 300 PSI 1,200 PSI Bend Restrictors

KTI72005 Red Rubber 1/2” 25’ 1/2” 300 PSI 1,200 PSI Bend Restrictors



KTI72019 Yellow Rubber 1/2” 50’ 1/4” 300 PSI N/A Oil Resistant

KTI72022 Red Rubber 1/2” 25’ 1/4” 300 PSI N/A Ultimate Durability

KTI72023 Red Rubber 1/2” 50’ 1/4’ 300 PSI N/A Ultimate Durability

LEGHFZ12100YW3 “ZillaGreen” Hybrid Polymer 1/2” 100’ 3/8” 300 PSI 1,200 PSI Bend Restrictors

KTI72018

KTI72014

LEGHFZ12100YW3LEGHFZ3850YW2

MTNHR2501/4” x 50’ Grease Hose Reel• 5000 lb. operating pressure• 5-1/4” width and 14-7/8” diameter• 2 Wire braided hose • Works for grease

LIN94354Medium Pressure Oil Reel Assembly 50’ x 1/2”• Made in the U.S.A. - all steel construction• Inlet/Outlet swivel fully ported for unrestricted

maximum flow, dispensing higher volumes of liquid• 180 degree double ratchet teeth provide solid latch

to lock hose in multiple positions• Powder coated finish for longer life in your shop

• Cartridge style spring • Fully closed bead• 1 year warranty on material and workmanship

hoses

$152.99

$168.75

$607.10

$22.49

$41.69

$29.97

$53.58

$77.76

$29.37

$53.99

$46.59

$51.18

$139.55

$188.79$205.75

$205.75$698.85

61

IMC3G3HHL13 HP Honda Two Stage Engine Powered Compressor• Two year warranty• 12 volt electric and recoil start• Unique E-Z pull tank drain• Fully enclosed belt guard• 12 volt charging system

This is a compressor ideally suited for service truck applications. Powered by a 13 HP Honda engine this compressor supplies a full 25.25 acfm. Other features include 175 PSi maximum pressure, engine slowdown, ASME safety valves, tank discharge valve, start key/panel, oil monitor, and a 30 gallon horizontal ASME tank. Dimensions are 44-1/2”L x 19”D x 45”H. Shipping weight: 369 lbs.

IRTC2475F13GHTwo-Stage Gas Powered Air Compressor• Durable cast iron for 100% continuous duty application• Precisioned engineered components for over 15,000 hours of trouble free use• Honda engine• Extended 2 year warranty when used with Ingersoll Rand’s All season select synthetic lubricant• Advanced safety features including low oil-level shutodwn for gas enginesgines

For fleet and field service applications, count on Two- stage, Gas-powered air compressors from Ingersoll Rand. Ideal for remote pneumatic applications, emergency production line needs and other situations where electrical power is scarce, these compressors deliver the air you need, when and where you need it. Featuring truck-bed mounting, these compressors include electronic ignition, idle engine control, a 30-gallon ASME receiver, an OSHA approved fully enclosed belt guard and a weather-resistant powder-coat paint finish.

IRT2475F14G14 HP Gas Drive Air Compressor - Kohler Engine•4HP Kohler Engine, 25 CFM @ 175 PSI•30 gallon tank - great for truck-mounting•Alternator Charging System included•Electric ignition and pull cord operation•Two-Year warranty on pump with purchase of IR Start up Kit

For more than 80 years, Ingersoll Rand has been the world leader in air compressor equipment. The 2475F14G is the leading air compressor for truck-mounting on roadside assistance vehicles. Features include a 14hp Kohler Gas-drive engine, electric or pull cord starting, alternator charging system, 30 gallon tank and the durability of a 100% cast-iron T30 air compressor pump. Dimensions - 48”22”x41”. Net weight - 455 lbs.

IMC3G3HKLTwo Stage Engine-Powered Reciprocating Air Compressor 12HP• T39 pump has a solid cast iron cylinder

• 12 HP Kohler Engine • Shipped “wet” ready for use

• 12 volt electric and recoil start

• 25.25 ACFM at 100 PSI • Two year “Bumper To Bumper” Warranty!

• Battery Charging system • 100% factory tested at full pressure

• Dimensions: 44-1/2 in. L x 19 in. W x 45 in. H

• Two year “Bumper To Bumper” Warranty!

$3,109.00

$2,825.00

$3,199.00

$2,939.00

62

ROB17800BRefrigerant Recovery/Recycling/Recharge Machine for Multiple RefrigerantsRecovers, recycles, evacuates, and recharges R-12, R-134a, R-22, R-502 MP and HP blends, and many more

• Ideal for refrigerated trailers, buses, RVs with refrigerants• Lockout panel prevents mixing of refrigerants• Comes with two 50-pound tanks• Internal clearing

MSC91580-BSingle Stage Portable Evacuation / Electronic Charging Station• R134a 2-way extruded

aluminum manifold • Deep micron, rotary vane

3CFM single stage vacuum pump• Electronic charging scale 240lb

capacity with a long lasting 9V battery• 2 1/2” gauges, hoses

and manual couplers• Convenient storage pocket

for scale and hoses

FJC6448R134a Red and Blue Hose Set with Manual Couplers• R134a Hoses• Red & Blue Set• 10 Ft• Manual couples attached

ROB15600CoolTech® 6 CFM Two Stage Vacuum Pump • Iso-Valve™ isolates pump from system,

making it easy to measure rate of rise• Two stage design means faster and higher vacuum level• Inlet feature prevents pump contamination• Gas ballast keeps oil clean and dry• Evacuates today’s tighter systems with t

heir increased sensitivity to contaminants• 15 microns ultimate vacuum

CPSAR2700MMulti Refrigerant Recovery, Recycling, Recharge Machine • Semi automatic refrigerant recovery re-charge• Can be used for all refrigerants• 1/3 HP compressor • Comes with a 50 lb tank• Pump down valve to clear machine for new refrigerants

MSC69110Portable A/C Recovery Unit• Automotive and heavy duty operation• 30 lb DOT tank• Heavy duty manual couplers and oil purge bottle• 60” yellow and 72” red and blue• SAE J2810 UL approved

MSC98210AAccu-Charge II Electronic Charging Scale• Charge programming allows user to

program desired quantities; before charge is complete, an alarm will sound allowing user ample time to turn off refrigerant supply

• Capacity of 240 lbs, removeable platform• Repeat allows user to charge previously

stored amount• Accuracy: +/-0.01 kg; +/-0.16 oz.;

+/-0.01 lb• Resolution : 0.01 kg/0.02 lb

Call for Pricing

$699.39

$106.95

$1,329.00

$504.49

$4,199.00

$225.75

63

NEW

PORPACJS2601A136” Portacool Jetstream™ 260• Increased internal component protection

increases product longevity• Liquid level indicator with automatic pump

shutoff protects your product and investment• Equipped with KUUL evaporative media, the

highest-quality evaporative media available and made in the USA exclusively for Portacool products

• Three year warranty on all electrical components• Lifetime warranty on evaporative cooler housing

PORPACHR3701F148” Portacool Hurricane 370• The only 48” variable speed portable

evaporative cooler on the market• The largest airflow of any portable

evaporative cooler on the market• Equipped with KUUL evaporative media, the


• Five year warranty on all electrical components• Lifetime warranty on evaporative cooler housing

PORPACJS2401A116” Portacool Jetstream™ 240• Large, easy-roll casters make moving this

evaporative cooler around a breeze• Liquid level indicator with automatic pump

shutoff protects your product and investment• Equipped with KUUL evaporative media, the


• Three year warranty on all electrical components• Lifetime warranty on evaporative cooler housing

MTN5036DD36” Direct Drive Drum Fan• Two speed direct drive for maximum energy efficiency• 120V/60Hz • Cut-off protection from overheating• Two wheels allow for easy movement around the shop• UL approved • 1 year limited warranty.

Power: 469Hi; 416 LowCFM: 11,600 Hi; 10,550 LowRPM: 1086 Hi; 998 Low

MTN503030” Pedestal Fan• 3 speed energy efficient motor• 120V/60Hz• Fan head can tilt, spring loaded

post for easy adjustment• Cut-off protection from

overheating• OSHA and UL approved

MTN5042BD42” Belt Drive Drum FanPower: 631Hi; 509 LowCFM: 14,800 Hi; 11,250 LowRPM: 1082 Hi; 978 Low

$3,195.00 $5,995.00

$357.19$199.99

$419.99

$1,939.99

64

FILFRAP32VDEF Air Operated Pump• 2” NPT bung adapter • Telescoping suction tube• Fluorocarbon seals • 6.5 GPM maximum, 100 PSI maximum• Polypropylene construction

FILFRHMN075S3/4” Manual Nozzle with Hook• Compatible with gasoline and diesel• 3/4” aluminum nozzle• Integral hanging hook compatible with all Fill-Rite products• Minimal spray pattern to reduce foaming and false shut offs• Made in the U.S.A.

FILFRHP32VDEF Hand Pump• Hand action lever • 11 oz. per stroke• Polypropylene construction• 2” NPT bung adapter

FILSP100-05N-PP-SSS1/2” Polypropylene Air Operated Diaphragm Pump• Ceramic Air Valve • Most efficient AOD on the market • Reinforced manifold • Santoprene elastomers • Five Year Warranty

THX108DEF-CHEK Professional Tester• Test Urea Concentrate of Diesel Exhaust Fluid• If mixture is 0.7% off, mfg suggest replacing the DEF and identifying the problem• Temperature compensating discs test DEF hot or cold• Tester is a cost effective tool to test DEF• IF DEF is not tested, it will cause harm to the vehicle

DOWDEF-1ADEF (Diesel Emission Fluid) 55 Gallon Drum Dispensing System• The Fuel Chief System is one of the industry’s first

“all inclusive” service systems for refilling a vehicle’s onboard Urea system tank• Maximum head 12’ Pumping DEF @ 5.7psi• 120 Volts, 60 Hz, 2 full load amps

The Fuel Chief line has been specifically designed for the convenient and safe service of the new SCR (Selective Catalyst Reduction) systems that require filling during normal service operations. The Fuel Chief Systems were the first in the industry to receive any domestic vehicle OE approval, and in many circles are considered the leader in Urea dispensing today!

PLW55-155DEF Rotary Barrel Pump• Fits all 5-55 gallon pails/ drums with standard bung• Ryton® construction - Teflon® and Viton® Seals• Delivers 7 gallons per 100 revolutions

OTC5025OTC UREA DEF Refractometer• DEF-unique calibrated scale

with 32.5%• Enables operators to clearly

determine if the DEF in their vehicle consists of a 32.5% Urea / Water solution

• 15-40% variance on scale • 0.5% line graduations• Complete kit provides operators everything they

need to calibrate and use DEF Refractometer

IPA9072 12V DC DEF Transfer System (Manual Nozzle)• A complete, DEF-rated, turnkey solution for

transferring DEF (Diesel Exhaust Fluid)• High-flow manual transfer nozzle• Corrosion-resistant fittings• Battery-powered by an innovative

and durable 9 GPM 12V DC pump

IPA9072A12V DC DEF Transfer System (Manual Nozzle)• Battery-powered by 6 GPM 12V DC pump

IPA9070A120V AC DEF Transfer System with Automatic Shut-Off Nozzle• The #9070 DEF Transfer System is a professional and complete turnkey

solution, powered by an innovative and durable 9 GPM 120V AC pump

• Standard equipment includes bracket assembly for totes, DEF-rated 6’

intake and 8’ output hoses, DEF-rated transfer nozzle (automatic shut-off)

• Conveniently mounts to DEF tote containers

• 3 year warranty

$174.50

$112.57

$315.37

$28.99

$95.85

$440.00

$17.97

$1,949.00

$859.95

$994.95

$1,229.00

65

OTC5280(DPF) Cleaner• OE tested and Dealer recommended – By many major diesel engine manufacturers.• Robust design

– For long shop life. Can be used as part of a preventative maintenance program.• High Pressure cleaning process for thorough cleaning of ash from DPF

– produces 10 times the burst energy of competitive low pressure units.• Initial Burst Quick check – To identify filters too plugged for proper cleaning.• Movable with locking wheels – For placement throughout the shop.• Computer Controlled Process Based on OE Requirements

– for “Start to End”cleaning without constant technician monitoring.• Containment of hazardous ash – For easy disposal.• HEPA Filter Air Exhaust System – To exceed environmental air standards for shop.• Operates on standard 115V outlet.• Proven to clean to over 92% efficiency. (3)

(3) Third-party OEM test results using pin gauge measurement with approved SPX adapters and burst cycles. Actual results may vary.

OTC5281DPF Thermal Processing Unit• The 5281 DPF Thermal Processing Unit is a device which will thermally

regenerate a DPF unit at a controlled, pre-programmed rate.

Sometimes, the DPF cannot be regenerated on the truck due to a failure with the vehicle’s own regeneration system, or in the case of retrofit applications, a lack of an on-vehicle regeneration system. Thermal regeneration of DPFs is used in conjunction with the OTC 5280 DPF Cleaner, and maximizes the cleaning efficiency of the cleaner. Designed to facilitate the cleaning of dirty filters – especially those with high amounts of wet soot, and unburned hydrocarbons.

• Pre-programmed thermal profile controls temperature ‘ramp up’ and ‘cool down’ to protect DPF from thermal shock, reducing the risk of DPF cracking.

• Holds temperature constant for two hours to ensure complete regeneration of filter.

• Built-in safety door lock and electronic door switch prevent unauthorized opening of the door when temperatures exceed 200 degrees F.

• Large chamber accommodates various DPF sizes and shapes. Front access door allows for easy access to the thermal chamber.

• Includes both standard cycle and “pre heat” cycle for oil-soaked filters.• Internal chamber dimension: 24” (L) x 24” (W) x 26” (H).

OTC5286Portable Diesel Particulate Filter Cleaner• Lightweight and highly portable - ideal cleaning system

for use in the shop or on a service truck• Flexibility - clean DPFs from 6” to 15.5” in diameter using

shop or compressed air of at least 100 PSI• No internal filters to clean or replace• Focused Air Jet Technology™ - concentrates a precise

high pressure stream of air directly into every cell• Rugged design provides maximum durability

OTCJ47399Horizontal DPF Handler• The Universal mounting assembly adjusts, front

to back and side to side for easy DPF handling • The height range of 6-1⁄2” to 29-1⁄2”

is usable for most of today’s trucks • Safety strap holds the load securely while

moving about the shop • Size allows for handling of all known DPFs Overall length: 34-1/2”; Overall width: 19-3/8”; max. height: 29-3/4”; Min. height: 7-1/2”; Side: 30 degrees; Tilt front: 15 degrees; Back: 15 degrees.

$10,999.00

$797.00

$9,999.00

$19,995.00

66

ATEML-6051BCMobile Column Lift 111,000 Lbs. Capacity - 6 Columns• 18,500 lb. capacity per column (111,000 lb. capacity total)

• Simultaneous operation of all columns

• Electronic system ensuring synchronization of all columns

• 5-yr. Structural Warranty

• 3-yr. Warranty on Electronics and Hydraulics

The ALI CERTIFIED 111,000 lb. capacity Atlas® battery

powered, six (6) piece mobile column lift system

(ML-6051BC) is now available. This 24V DC motor and

battery powered system works anywhere. It is not dependent

on a wall socket. The Atlas® mobile column lift system

is designed and engineered for bus, RV, and truck lifting

applications that require high quality and reliability.

ATEML-4030BC-KIT66,000 Lb. ALI Certified Battery Powered Mobile Column Lift System• Maximum lift height 67” (5’ 7”) • Tire diameter sizes 19”- 44” • Lifting time with maximum load 95 seconds;

lowering time with maximum load is 100 seconds

ATEML-4034BC-KIT74,000 Lb. ALI Certified Battery Powered Mobile Column Lift System• 18,500 lb. capacity per column (74,000 lb. capacity total)

• Simultaneous operation of all columns

• Electronic system ensuring synchronization of all columns

• 5 year Structural Warranty

• 3 year Warranty on Electronics and Hydraulics

This 24V DC motor and battery powered ALI Certified

system works anywhere; it is not dependent on a wall

socket. This system is designed and engineered for bus,

RV, and truck lifting applications that require high quality

and reliability.

Each heavy duty mobile column is DC motor powered

and equipped with a pair of rechargeable batteries. This,

coupled with the hydraulic pallet jack system on each

column, allows for unparalleled freedom of movement.

The columns may even be moved outside for use on a

level concrete surface with a minimum thickness of six (6)

inches. The mobile columns can be easily stored out of

the way when not in use.Each column is equipped with an

LCD screen, an emergency stop button, and has a lifting

capacity of 18,500 lbs.Battery power lasts 10-20 lifts

depending on load and is recharged with attached 110V

Single (1) phase cord.

$42,500.00

$27,995.00

$25,995.00

67

SUPER DUTY

SUPER DUTY

SUPER DUTY

ATEML-AXLE-STAND-AMobile Column Lift Stand• 16,500 Lb. capacity per stand

• Adjustable height: 53” (4’ 5”) - 74” (6’ 2”)

• Includes One (1) axle stand

• Shipping weight: 250 lb.

• Casters to help move stand

INT3318Stabilizer Jack• 100,000 Lb. static load capacity

• 45,000 Lb. lifting capacity

• Meets osha requirements for stabilizing

loaded and unloaded trailers

• Adjusts from 39” to 51”

• Pivoting, reversible ratchet head levels

• Trailers on uneven ground

INT3342SD15,000 Lb. Truck Stand - Short• Adjustable height range from 57” to 82”

• 21-1” Height adjustments with 4” fine

adjustment by screw

• Rubber pad protects vehicle from damage

• Spring loaded casters for ease of positionin

• Spring loaded tower for easy height adjustment

INT3344SD15,000 Lb. Truck Stand - Short• 15,000 Lb. Capacity

• Adjustable height range

from 36” to 54”

• 17-1” Height adjustments

• Rubber pad protects

vehicle from damage

• Spring loaded casters

for ease of positioning

INT3340SD33,000 Lb. Truck Stand• 33,000 Lb. Capacity

• Adjustable height range from 57” to 82”

• 21-1” Height adjustments with 4” fine

adjustment by screw

• Spring loaded casters for ease of positioning

• Spring loaded tower for easy height adjustment

INT3400A10 Ton Capacity Air Lift Jack• 10 ton capacity achieved at 200 PSI air supply• Heavy duty air valve offers accurate lift control• Removable “T” handle for easy storage• Extension tubes offer multiple lifting and locking positions

$926.75

$495.00

$743.44

$1,342.25

$1,174.45

$2,022.50

68

OMEHW93690C10 Ton Air Operated End Lift with High Lift 10 Ton Stands• Lifts 10 tons at 200 psi• 2-12” pneumatic rear tires and 2-6” casters for easier transport and

positioning under load• Less maintenance with one large cylinder• Pin style column adjust in 2 inch height intervals on jack stands• Ideal for fleet, agricultural and construction maintenance

PREPAID FREIGHT

OTC152010 Ton Mobile Vehicle Lift System• System can be rolled to the vehicle anywhere in the shop or outside on a level surface• Unique design provides lift from the tires, not the frame or axle members - Ideal for

situations where limited ground clearance or a lack of clear access complicates lifting• Single controller operates both sides of the system for a smooth,

level lift up to two full feet from the bottom of the tires to the ground• Units can double as support stands when retention pin is inserted• Covered by OTC Lifetime Marathon Warranty

OTC159010 Ton Air Lift for Trucks and Trailers• Adjustable lifting saddles and an

extra wide stance for extra stability• 10 ton lifting capacity at 200 PSI

air supply• Lifting range is 13” to 52” with a 14” reach• An automatic mechanical safety

catch engages in five height positions, it must be manually released to lower the load

• Two large swivel casters and pneumatic tires make it easy to maneuver, even on loose gravel

JET S90 Series Hand Chain Hoists • Weston Style Dual Pawl Brake System –

Dual Pawl design increases safety by splitting the opposite sides of the ratchet gear for greater load security

• Alloy Steel Hooks – Industrial rated hooks rotate 360 degrees for easy rigging

• Needle Bearing Design

JET101910 - 1 Ton 10’ Lift

JET101930 - 2 Ton 10’ Lift

JET101941 - 3 Ton 15’ Lift

air & end lifts


IN CANADA

$4,239.00

$10,899.00

$4,449.00

$217.75$345.00$509.59

69

OTC1505B5 Ton Hydraulic Floor Jack• Material: Steel • Min. height: 6”• Max. height: 22” • Net weight: 250 lbs.• Foot pedal provides easy way to pump to load

OTC1507BStinger 5-Ton Air/Hydraulic Service Jack• The 10-ton model can also be operated manually, when

shop air is not available.• Rugged steel frame members• Rear swivel casters make spotting the jack easy• Spring-loaded handle may be locked in three positions• Air pressure: 80-120 PSI, lifting range: 5-7/8”-22”, saddle dia.: 6-5/8”,

overall reach: 87”, frame height: 8”, handle length: 40”• Bring the versatility of air-assist operation to your shop’s lifting tasks.

OTC51066-ton Capacity Air/Hydraulic Service Jack• Huge steel front wheels are mounted in bearings for trouble-free service life• Spring-loaded handle can be locked in three positions

OTC52066-Ton Heavy-Duty Service Jack• Ergonomic handle for user

comfort and easy mobility• Built-in tray for fasteners and tools• CE marked – ASME/PALD tested

SUN66045 Ton Floor Jack• Heavy gauge steel side plates prevent twisting• Hydraulic power unit is Uniweld constructed

for increased strength and leak prevention• Front wheels with roller bearings & ball

bearing mounted rear caster wheels provide stability & easy maneuverability.

Service Jacks• 45.75” long pump handle with release

knob works independently of handle position• Complies with ASME PALD/2014 safety standards• 2 Year Warranty on material and workmanship

OTC1510B10 Ton Hydraulic Service Jack• A built in safety overload prevents using the jack beyond its rated capacity• Convenient foot pedal speeds the lifting operation• Has a spring loaded 40” handle

OTC1511BStinger 10-Ton Air/Hydraulic Service Jack• Bring the versatility of air assist operation

to your shop’s lifting tasks• Can also be operated manually,

when shop air is not available• Huge front wheels mounted in

bearings provide trouble free service life • Rear swivel casters make spotting the jack easy

Air pressure: 80-120 PSI; lifting range: 6-3/8” to 22”; saddle diameter: 7-3/8”; overall reach: 90”; frame height: 12-3/4”; handle length: 42”.

KTI63186 - 10 Ton • 10 ton capacity service jack

with a lift range from 6.25” to 22.5”

KTI63155 - 5 Ton• 5 ton capacity service jack with

a lift range from 5.75” to 22”

OMEHW93657C 4 Ton Long Chassis Service Jack with 6 Ton Jackstands• Dual piston action provides speed to contact and power to lift• Cast lift arm for heavy loads• T handle with release knob for ease of positioning and load control• Legs on jack stands have folded metal footing to spread weight

more evenly protecting parking lot surfaces and significantly reducing setting while working under the vehicle

• Set includes the HW93657 and HW93506.

service jacks

$986.49

$1,079.00

$3,235.00

$947.45

$857.05

$1,178.55

$1,625.00

$1,103.00

$2,148.29

$1,223.00

70

OMEHW93660C10 Ton Hydraulic Service Jack and Jack Stands• Lifting trucks, trailers, and buses by

the axle, differential, or frame• Dual piston action provides speed to

contact and power to lift• Pin style column jack stands adjust in

2 inch height intervals• Heavy duty square tubing on jack

stands

OMEHW9366010 Ton Manual Service Jack• Lifting trucks, trailers, and buses

by the axle, differential, or frame• Dual piston action provides speed

to contact and power to lift• Long chassis for hard to reach points• Handle adjusts to three pumping positions• T handle with release knob for exact positioning of a load

Sealed hydraulic unit keeps out grit, grime and moisture. Large full swivel saddle and ball bearing caster make positioning easy. Cast lift arm for heavy loads. Made in the U.S.A. Comes with 2 year warranty.

OMEHW9366210 Ton Air/Manual Service JackOperates manually or with air. Patented “Speed Pak™” reduces handle pumping. Uses standard shop air 110-175 psi pressure (140-175 psi for rated load).

OME2220120 Ton Long Chassis Service Jack with Air• High speed Air TurboMotor is equipped to raise the load

to the desired height efficiently, effortlessly, and safely• Heavy gauge, steel frame helps prevent distortion or twisting• Handle actuated release valve provides precise metered

control of lowering speeds• Convenient foot pedal designed for fast, no load lifts

OTC151220 Ton Stinger Floor Service Jack • The 20-ton capacity with a lifting range of 7-1/2” to 24”• Low-profile stance and the extended height add to versatility• Wheels and swivel casters

feature internal bearings• The foot pedal or jack handle

can be used for pumping action• Counter-balanced, spring assisted handle has a three-position lock• Saddle diameter: 7-1/2”; overall reach: 97”; frame height:

10-1/4”; handle length: 42”; floor space: 18-1/8” to 61-3/8”.

OTC521010-Ton Heavy-Duty Service Jack• Ergonomic handle for user comfort and easy mobility• Foot pedal for quick approach of the lifting saddle to load• Built-in tray for fasteners and tools.• CE marked – ASME/PALD tested

KTI635151,200 Lb Low Profile Transmission Jack• 1200 pound capacity transmission jack

with a lift range from 5.75” to 31.5”• For automotive use up to pickup truck

transmissions• Wide front-open chassis for lower profile

when loaded• Full swivel pump handle can be accessed in any work position• Complies with ASME PALD/2014 safety

standards• 2 Year Warranty on material and

workmanship

OMEHW937181 Ton Floor Style Transmission Jack• Wishbone design allows

unit more mobility• Tubular steel frame• 360° swivel casters• Load restraint chain• Designed for heavy duty

transmissions

service jacks

$4,099.12

$2,649.00

$2,603.00

$3,535.00

$2,899.00

$1,510.00

$489.50

$2,509.00

71

INT3180-SP12- Ton Heavy Duty Transmission Jack Promo• Low height: 8-1/2”; High height: 34”• Fully adjustable saddle with maximum tilt for easier alignment• Convenient side trays for small tools and parts• Safety overload bypass system to prevent hydraulic damage• 32” handle pivots 360° around pump • Adjustable corner brackets• Rugged industrial-grade 4” casters • 2009 ASME/PALD compliant• Includes INT3181 transmission adapter set FREE (Comes with 6 adapter bars

- 4 small, 2 large, 4 positioning screws, and 2 securing chains)AFF has the only super heavy-duty transmission jack with a 4,400 lb. capacity. Built “forge-tough” to handle removal, transport and installation of transmissions, transfer cases or differentials on heavy-duty trucks, buses, agricultural and construction equipment.

OTC5078Air Assisted 2,000 lb. Capacity High Lift Transmission Jack for Trucks and Buses• For shops with in-ground or above-the-floor vehicle hoists• Low height of 41-1/2” allows transmission to be rolled out from under

bus or other vehicle’s frame, a clearance problem with competitor’s jacks• Metered, foot-operated air pump allows effortless lifting of the transmission

into place, controlling the load precisely during removal and installation• Operation is twice as fast as competitive jacks powered by a hand pump, and it costs less• A dedicated adapter that fits the popular Allison 500 and 600 series automatic transmissions in included

Safety bypass prevents damage caused by a system overload. Covered by OTC Lifetime Marathon Warranty®.

OTC1522A2,000 lb. Capacity Low-Lift Transmission Jack(Freight Delivery)• Rugged, stable unit is ideal for handling heavy transmissions• Includes adapter plate for Eaton® Fuller® Road Ranger® transmissions• Low profile design gets under the lowest clearance trucks, making it ideal for clutch repair work• Pump handle rotates 360° for operator convenience• Safety overload prevents use beyond its rated capacity• Height range 6-7/8” to 35-1/4”

OTC5019A2,200 lb. Capacity Low-Lift Transmission Jack(Freight Delivery)• The 8-1/4” low height is perfect for aerodynamic trucks with low ground clearance• Special mounting adapter (No. 540231) fits popular Eaton® Fuller® RoadRanger® transmissions used on

nearly all Class 7 and 8 heavy-duty trucks. Mounting plate angle is adjusted with the turn of a wrench• Degree of tilt: 20° back, 15° forward, 12° side to side• Swiveling pump handle permits ease of operation in restricted working spaces. • Fast-acting pump quickly raises lifting arm.

OTC528150Adapter• Eaton® ‘Lightning” adapter. Used with the No. 5019A transmission jack

OTC543284RoadRanger Transmission Adapter• RoadRanger® transmission adapter for Model series FRO-11210C

to FRO-18210C that is equipped with an integrated cooler• Used with the No. 5019A transmission jack.

OTC553516Differential Mounting Adapter• Differential mounting adapter mounts easily using existing bolt patterns• Fits the most common differentials currently in use on Category 7 and 8 Heavy Duty Trucks,

including: Eaton, Fuller, Rockwell, Meritor, Spicer, International, and Mack• For use on OTC 5019A / 5078 and Stinger 1522A Transmission Jacks

KTI635171.5 Ton Truck Transmission Jack• Range from 8.62” to 36.625”• Pump handle rotates 360 degrees for multiple work positions• Universal saddle with tilt features• Complies with ASME PALD/2014 safety standards• 2 Year Warranty on material and workmanship

OTC1522A

OTC5019A

transmission jacks

$1,499.95

$440.39

$274.65

$470.79

$1,672.00

$2,385.00

$1,258.00

$2,825.00

72

SUN662222 Ton Air / Hydraulic Jack• Narrow chassis design fits easily

between tandem wheels• Release knob on top of handle operates

independently of handle locking lever• Contoured chassis base to prevent damage

when under a heavy load

OTC1788B22-Ton Under Axle Jack• One pull of the handle activates

the self-retracting 22-ton capacity ram without having to crawl underneath the vehicle

• Long 49-1/2” T-handle lets you easily position jack under vehicles with long overhangs

• Improvements include advanced seal ring material and one-piece piston air pump

• Minimum Lifting Height: 8 1/4”• Maximum Lifting Height with 3/4” Saddle: 17-

3/4”, 3-7/8” Saddle: 20-7/8”

OTC5093BLong Reach Under Axle Jack• Three-stage lift capacity – 22, 38.5 and 71.5 ton• Air-driven cylinder with pressure control knob

for maximum user safety• 4-position handle: horizontal,

45 degrees, vertical, or collapsed• 7-inch minimum height for l

ow clearance vehicles• Complies with ASME / PALD test requirements

OTC529227.5 Ton Under Axle Jack• Robust design with completely sealed piston• New lever design and pneumatic release valve

allows for more precise release control, does not require separate valve operation step

• Four position handle includes ‘stow away’ position• Spring return piston• Includes two height adapters, ANSI/PALD certified

SUN672222 Ton Premium Air Hydraulic Truck Jack• Full air actuation lifts saddle to lift

point rapidly, eliminating downward resistance from springs

• Spring-less design eliminates weathering, rusting of springs and risk of damage

• Weather-proof durability with enclosed power unit

• Meets ASME-PALD 2014 standards

FREE 1” Drive Impact Wrench SUNSX556-6 with SUN6722 purchase while supplies last!

AMN14160Telescopic Air Jack, 30/15 Tons• Hydraulic powered up and down, quick lift without load• Long T-handle let’s you easily position your jack under vehicle• High polish chromed piston rods and cover boards for extended

service life• 30/15 tons, Min. height (5.9”), Max height (11.8”)

axle & truck hydraulics jacks

$599.00

$746.10

$3,685.00

$2,239.00

$1,165.00

$1,324.99

73

ESC10448Yellow Jackit 22 Ton Air Hydraulic Floor Jack• 22 ton capacity• 8-1/4” minimum height; 20-3/4”

maximum lift height• Self retracting shop jack• Chrome-plated pump and piston and

ram for added rust resistance• Welded base and cylinder to assure

strength and eliminate leaks

It has a chrome-plated pump and piston and ram for added rust resistance. It is a shop jack that is self retracting with a welded base and cylinder to assure strength and eliminate leaks.

ESC10771Yellow Jackit 50 Ton 3 Stage Air/Hydraulic Jack• 3 Stage Jack 50T/25T/10T• Power up / power down• Handle length: 57.5”• Easy to roll jack• Air over hydraulic for smooth heavy lifting

Extremely low minimum height 5.5”. Designed for lifting low buses and other low clearance vehicles. Maximum stability.

Air Hydraulic Truck Jacks• Narrow width fits between tandem wheels• Load-limiting and bypass valves prevent use

beyond rated capacity and overextension of ram• Spring activated self retracting ram• Complies with ASME PALD/2014 safety standards• 2 Year Warranty on material and workmanship

KTI63194 - 22 Ton • 22 ton capacity truck jack with a lift range from 8.9” to 17.5”

KTI63198 - 50 Ton• 50 ton capacity truck jack

with lift range from 11.4” to 21.25”

OME2322122 Ton Air Actuated Hydraulic “Axle” Jack with Extension Screw• Material: Steel • Min. height: 9-7/8”• Max. height: 22-1/2” (with 2-1/2” adapter) • Net weight: 100 lbs

OME2322722/35 Ton Air Hydraulic Truck Jack• Compact, low profile design for maximum

access, which fits easily and safely between wheels of tandem axle vehicle

• Large steel wheels for easy positioning and smooth motion

• Sturdy one piece handle assembly• Handle-top metered control release

valve for easy height adjustment, safely away from load

INT565E22 Ton Air/Hydraulic Axle Jack with 3 Pc. Ext Kit• Heat treated cylinder wall and chromed piston• Automatic in-line oiler to lubricate air motor

The 22 ton air/hydraulic axle jack includes the 3 piece RAM extension kit. This extension kit includes 3/4”, 2-3/4” and 4” extensions.

OMEHW93735A25 Ton Axle Jack with 3” Adapter• 8” Low height allows lifting

from axle or suspension• Compact, powerful design

quickly lifts rated capacity• Specially coated ram prevents

rust and extends jack life• Air assisted ram retract• 3” adapter for added height

OMEHW93735AC25 Ton Axle Jack with 25 Ton Jack Stands• Jack has 8” low height allows lifting

from axle or suspension• Compact, powerful design of jack

quickly lifts rated capacity• Pin style jack stand column adjusts in

1½” height intervals• Heavy duty square tubing• Jack stands sold in pairs

axle & truck hydraulics jacks

$879.00

$2,180.00

$2,171.97

$612.22

$479.99

$733.50

$752.30

$952.89

$1,898.70

74

OTC52144-Ton Capacity Fork Lift Jack• 8,000 lb. capacity (4 tons) with a low starting height of 2-5/32” • 10,000 lb. capacity (5 tons) when lifting from cylinder saddle–

ideal for agriculture and industrial applications • Unique shape of primary saddle allows for handling of all lift truck

configurations with flat or edged surfaces • Features include high-quality seals, chrome-plated internal

components, and high-strength steel construction • Complies with ASME-PALD

Forklift has a secondary lifting surface feature and a stable base.

OTC411155-Ton Aluminum Ram with Half Coupler• 55-Ton Aluminum Rams Get the

strength of a steel ram but about half the weight

• Easily carry these single-acting spring-return rams around the garage shop or into the field for on-the-vehicle repairs

• 6-1/8 inch stroke• Collapsed height 10-3/4 inch and

extended height 16-7/8 inch

AMN13000100 Ton Aluminum Jack, 6” Stroke• Lightweight aluminum for easily handling and

placing under the vehicle• Includes “Shut-Off Valve” which allows the

pump to be removed while ram is extended• Stroke: 6”• Retracted Height: 11.75” (30 cm)

Max. Height: 17.75” (45 cm)

ESC1031255 Ton Air Hydraulic Aluminum Jack• 55 Ton capacity, 6” stroke• Unit has a collapsed height

of 10.5”, extended height of 16.5”• Lightweight only 29 lbs.• Uses any 10,000 PSI pump• Excellent for off highway

tire work and is the preferred jack for road service

OTC15404-Ton Capacity Fork Lift Jack• 8,000 lb. capacity with a low starting height of 2-5/8”.• Two-position lift pad permits handling of all lift truck

configurations with flat or edged surfaces.• Minimum low lift: 2-1/4”. Maximum high lift: 16-1/4”.• Features include high-quality seals and high-strength

steel construction.• Handle stop makes for easy maneuverability.• 30” long handle.

OTC4020Air/ Hydraulic Pump• 3/8” NPTF oil port• Weight: 15 lbs., 3 oz.• Develops 10,000 PSI at 100 PSI air pressure• 98 cu.in. usable oil capacity in plastic reservoir

With shop air as the energy source, these pumps have the power and oil capacity to drive even the large 55-ton rams. They are ideal all-around power sources for dozens of body, frame, and alignment applications. Also can be used with a variety of rams, presses, and hydraulic pullers operating at up to 10,000 PSI.

specialty jacks$1,510.00

$704.45

$618.99

$1,849.95

$1,749.99

$1,109.93

75

OTC5015ATruck Clutch/Flywheel Handler• Replaces 14” and 15-1/2” clutch assemblies• Lifting range of 9” to 37”• Swivel casters provide easy maneuverability• Makes the task an easy, one-person job• Carries a Lifetime Marathon Warranty®

• Includes a 2” spline shaft with a1-1/4” pilot to aid in alignment.

OTC5018ATruck Clutch and Flywheel Handler• Handles 14” and 15-1/2” clutch assemblies weighing up to 250 lbs• Open stance with swivel casters • Eliminates any lifting of the clutch• Enables technician to pivot clutch to any position for removal and installation• 360º swivel head

OTC515686 Splined Shaft (1-3/4” dia.; 1-1/4” pilot)

OTC516159Splined Shaft (1-3/4” dia.; 1” pilot)

OTC516160Flywheel Handling Attachment

OTC15952,500 lb. Capacity Power Train Lift • Powered by a quiet, 110 volt

electric/hydraulic pump• Smooth, sturdy lifting and

lowering motion controlled by hand-held remote

• Two patent pending independent adjusting screws tilt the table + or - 15 degrees side to side, or fore and aft, and ensure maximum stability of the table in any position

• Large casters accommodate heavy loads

• A 30 ft. long retractable extension cord reel is mounted to frame

OTC1585APower Train Lift with Tilting Plate• Compact design and swivel casters for easy maneuverability• Includes the tilting plate• Height range is 29-1/2” to 68-1/2”• Table size: 20-1/2” x 30-1/2”• Supports up to 1,250 lbs.

clutch & flywheel handler

power train lifts

$788.59

$977.75

$313.95 $225.65

$205.95

$5,378.00

$2,874.57

76

OTC1750A6,000 Lb. Capacity Revolver® Diesel Engine Stand with Adapter Assembly• 96:1 ratio worm and gear set rotates

components a full 360 degrees• Crank handle can be locked in any position• Integral 12 ton jack raises the work to provide the swing radius

needed clearance• Includes universal engine adapter assembly• Two front wheels and two rear casters provide mobility

Universal adapter assembly permits use with a wide variety of mounting plates for Caterpillar, Cummins, Mack, IH, and Detroit in-line or “V” series diesel engines, as well as Allison transmissions.

OTC1735BHeavy-Duty Motor-Rotor® Repair Stand, 2000 Lb. Capacity• Handles a wide variety of engines, transmissions, torque converters,

and rear axles from trucks, tractors, and construction machinery• The 50:1 ratio gearbox allows full rotation of mounted unit with just a

turn of the crank and locks in position. Easily maneuvered when loaded• Twin-post design, featuring laterally adjustable, 3-position outboard

support; provides an extremely stable work-holding unit• 2,000 lb. Capacity Heavy-Duty Motor-Rotor® Repair Stand• Covered by OTC Lifetime Marathon Warranty®

OTC17506,000 Lb. Revolver Diesel Engine Stand• The crank handle can be locked into any position• Integral 12-ton jack raises the work to provide

the swing radius needed for clearance• Two front wheels and two rear casters provide mobility• Covered by OTC Lifetime Marathon Warranty• Universal engine adapter assembly available

engine stands

$1,725.00

$6,999.95

$6,300.00

77

OTC18136,000 Lb. Capacity Heavy-Duty Mobile Floor Crane• Telescoping boom adjusts to three different

lengths for three different weight capacities• Boom swivels for vertical and lateral positioning• Equipped with two speed hydraulic pump

for rapid, easy lifting• Legs extend to straddle the biggest tires• Usable reach is almost 92”

OTC18146,000 Lb. Heavy-Duty Mobile Floor Crane with Electric/Hydraulic Pump• Telescoping boom adjusts to three different lengths

for three different weight capacities• Boom swivels for vertical and lateral positioning• Equipped with electric/hydraulic pump (115V)

with remote motor control• Legs extend to straddle the biggest tires• Usable reach is almost 92”

Steering dolly for easy maneuverability also serves as floor lock. Three boom positions give capacities of 4,000, 5,000, and 6,000 lb. to handle the biggest engines, and often the transmission right along with it!

Floor Cranes• To conserve valuable floor space, crane folds into a compact package for storage• For “close-in” work, leg spread adjusts to clear vehicle’s wheels, telescoping

boom extension gives additional reach• Roller bearing mounted wheels and steering dolly provide ease of mobility• A two-speed hydraulic hand pump provides fast boom travel; descent of boom is

under precise control of operator

OTC18192200 Lb. Capacity Heavy Duty Floor Crane • Includes 16-7/8” lifting chain

OTC18204400 Lb. Capacity Heavy Duty Floor Crane (Freight Delivery)• Includes 18-3/8” lifting chain

cranes

$11,126.00

$12,489.00

$4,269.00

$5,549.00

78

OTC5017ABrake Drum Dolly• Remove, install, and transport truck brake drums without physically having to lift them• Works on 15” and 16-1/2” drums found on most Class 7 and 8 tractor and trailer brake systems• Heavy-gauge steel construction, ten-inch pneumatic tires, and adjustable handle• Makes it a 1 person job• Covered by OTC Lifetime • Marathon Warranty®

OTC5090Back Buddy™ II• Fast-motion ratcheting jack with 14” of vertical lift• Tilting mechanism to achieve the exact angle necessary

for precise reassembly• Fold down handle for open access to the work area• Pneumatic rear tires smoothly roll across any shop floor• Onboard lube tray and toolbox

BBD350BBack Buddy II• Makes brake jobs easier and more profitable• Rolls under and bolts onto heavy drum

and hub assembly, then handily rolls the assembly out and lays it over for servicing

• Angles for perfect hub alignment, eliminating seal damage and costly fixes

• A simple change of adapters transforms the tool in seconds from inboard to outboard application

• 29” L x 48” W x 43” H; 165 lbs shipping weight

ATEATTC-AEZWLPneumatic Portable Wheel Lift• 180 lb. capacity3” Poly casters• Operates on 120 PSI air pressure• 90 day warranty on material and

workmanship

PREPAID FREIGHTOMEHW937663/4 Ton Wheel Dolly• For handling of dual wheels and large single wheels• Handles up to 52” diameter tires and wheels• 2 swivel ball bearing casters for easy positioning• Wide frame and lifting carriage • Carriage arm rollers with self-lubricating bearings

AMN71320Super Single Wheel Dolly• Decreases back injuries when removing and

replacing heavy truck tire/wheel assemblies• 14” (35.5 cm) roller accommodates low profile tires• Allows for easy removal and installation of tire/

wheel assemblies• Rollers allow for simple lug alignment• For use with all 22.5 and 24.5 truck tires (including

super singles

brake & drum dollies

wheel dollies & lifts

$1,449.00 $640.59 $1,888.89

$189.99

$399.00

$1,259.00

79

OTC1769AStinger Truck Dual Wheel Dolly• This 1,500 lb. capacity dolly will remove, transport, and replace

dual wheel and tire assemblies without strain or struggle• Swivel casters, 3-1/2” front and 3” rear, provide easy maneuverability• Floor space is 43” x 42”• No. 1769 hydraulic jack provides over 6-1/2” of lift and tilts

wheel assembly 7 degrees to prevent damage to wheel seal• Includes a 6’ support chain to hold load in place

OTC1770A1500 lb. Capacity Truck Dual Wheel Dolly• Remove, transport, and replace dual wheel and tire assemblies

without strain or struggle• 1,500 lb. capacity and 3-1/2” swivel casters provide easy maneuverability• Hydraulic jack provides 0 to 5” of lift and tilts wheel assembly 4 degrees

to prevent damage to wheel seal• Floor space is 45” by 41”• Includes a 6’ support chain to hold load in place

Easy Lever™ Wheel Dollies• Our Easy Lever wheel dolly gives technicians the leverage they need to easily remove or install truck tire-and-wheel assemblies• Heavy-duty construction capable of toting 300 pounds• Features improved “bent arm” design to improve leverage and minimize back strain• Onboard rollers make stud-to-hole alignment a snap• Spring-loaded kickstand for handy parking• Rugged tubular steel construction

OTC5095A• With a width of 22”, this dolly handles

tire diameters of 24” to 36”.

OTC5096A• With a width of 26”, this dolly handles

tire diameters of 36” to 48”

ESC70130Truck Wheel Dolly• Works on truck tires 19.5” through 24.5”• Rolls truck wheels easily on 3” casters• Rotate wheel to align bolt holes on studs• 280 lb capacity• Reduces back injuries in shop

ESC90538Agricultural Wheel Dolly• Easy mounting, demounting and handling of large wheels on agricultural and earth moving machinery• Double acting hydraulic system• Hands free switch between lifting and lowering action - safe and controlled lowering• Heavy duty construction• Capable of handling large wheels from 45.3” up to 84.7” in diameter and up to 41.3” in depth

Top point wheel connection rod keeps the wheel in safe balance. Capacity: 3,306 lbs. Large 6” wheels for easy maneuverability.

ESC70132Heavy Duty Truck Wheel Dolly• Heavy duty wheel dolly is designed specifically

for super single and flotation tires• 14” wide rollers accommodate even the

largest super single and flotation truck wheels• Lifting capacity of 450 lbs.• Reduces back injuries in the shop• Heavy duty tubular construction

wheel dollies & lifts

$112.55

$3,544.29

$148.95

$600.97

$1,481.00

$256.75

$250.59

80

BHKB6511510 Ton Porto-Power Kit• Automatic pump overload system protects

against damage to rams and equipment• Heavy walled extension tubes stand up in

tough situations• Flex head features permanently molded

rubber pad-interlocked to prevent separation• 1/2 ton capacity hydraulic spreader features

2” jaws and spreads from 5/8” to 3-3/4”• Ram closed height: 13-5/8”; Ram extended

height: 19-3/4”

OTC1515BStinger 10 Ton Collision Repair Set• Industry standard couplers are interchangeable with leading manufacturer’s units• Snap together design of extension tubes

allows for easy assembly• Sturdy extension tubes hold up in

even the toughest situations• Automatic overload system on pump

protects against damage to equipment• 1/2-ton hydraulic spreader tool has

2” jaws that spread from 5/8” to 3-3/8”

OTC526920-ton Wide Truck Ramps• A pplication: Wider Front Wheels (cement, dump, garbage trucks)• Long, 33” retractable T-handle enhances mobility.• Non-skid rubber matting prevents slippage during use.• Durable, heavy-duty rubber wheels.• Capacity per pair: 20 tons; overall length: 51”; tread width: 16”• Covered by OTC Lifetime Marathon Warranty®.

SUN152020 Ton Truck Ramps• Retractable telescopic T-Handle for easy maneuverability and storage• Accepts up to 16” tire widths• Perforated holes in ramp for tire traction• Rubber surface base prevents slippage when loading/unloading of vehicle• Total weight capacity of 20 tons per pair

OTC526820-ton Truck Ramps (Pair)• Long, 33” retractable T-handle enhances mobility.• Non-skid rubber matting prevents slippage during use.• Durable, heavy-duty rubber wheels.• Capacity per pair: 20 tons; overall length: 51”; tread width: 10”• Covered by OTC Lifetime Marathon Warranty®.

OME9320020 Ton Truck Ramps (Pair)• Designed specifically for heavy-duty tasks• Large wheel designs for extra durability• Non-skid rubber matting enhances operation safety• Long retractable T-handle for easy positioning• Sold and to be used in pairs

OME9320120 Ton Wide Truck Ramps (Pair)• Designed specifically for heavy-duty tasks• Large wheel designs for extra durability• Non-skid rubber matting enhances operation safety• Long retractable T-Handle for easy positioning• Extra wide treads for bigger trucks

KTI6370910 Ton Portable Ram Kit• 10 ton portable ram kit for spreading,

bending, pushing, and clamping applications• 8,050 PSI hand pump and 12.6” long ram with

5.12” stroke• Basic attachments, .5 ton spreader ram, and four

extension tubes included• Force gauge to measure force applied to work• Snap-fit design for quick attachment and tube

connections• Complies with ASME ASP-2010 Safety Standards• 2 year warranty on material & workmanship

truck ramps

portable hydraulic sets

$916.97

$722.69

$412.15$429.85

$715.00

$939.85$716.15

$319.99

81

NEW

NEW NEW

NEW

NEW AMN15255FR Industrial Cribbing Block Set with Jack Plate• Certified and Tested• Rated up to 298,000 lbs (135,000 kg), depending on configuration• Does not splinter, like wood; non-conducting plastic resists oil and most chemicals• Interlocking or aggressive non-slip surface• Multiple sizes, shapes fit most applications

Industrial cribbing blocks are designed to provide superior crib stability compared to standard hardwood and softwood products. They will not fail catastrophically like wooden cribbing. In addition, unlike wood products, industrial cribbing blocks do not splinter or absorb most fluids. Convenient sizes help to quickly and safely build stable cribs to support loads. Model 15255 Kit includes (6) 15230, (3) 15210 and (1) 14465 Jack Plate.

AMN1526012 Piece Super Stacker Cribbing Set (15230)• Certified and tested• Multiple sizes, shapes fit most applications

Interlocking or aggressive non-slip surface• Non-conducting plastic resists oil and most chemicals• Does not splinter, like wood• Carrying lanyards provided on all 6” x 7” and 4” x 4” crib blocks• Made from 100% recycled plastic• Can be used with Lincoln log mating or pyramid mating• Made in America

Kit includes: (12) PN 1530 6” tall each (150 ton capacity when used in 3 block configuration)

AMN14465Jack Plate• Jack Plates provide greater

stability to bottle jacks and hydraulic rams

• Lightweight and Easy to Handle• Model 14465 (8 lbs) measures

12” x 12” x 1.5” (Yellow Handle)• 100 Ton capacity• Non-skid surface prevents jacks

from slipping in wet or oily conditions

Complies with OSHA regulation 29 CFR 1926.305, “When it is necessary to provide a firm foundation, the base of the jack shall be blocked or cribbed.” Custom sizes available.

AMN15230Super Stacker Industrial Cribbing Block• 6” X7” X24” Black• Multiple sizes, shapes fit most applications• Does not splinter, like wood• Rated up to 298,000 lbs (135,000 kg), depending on configurationsuperior

crib stability compared to standard hardwood and softwood products. They will not fail catastrophically like• Certified and Testedwooden cribbing. In addition, unlike wood

Interlocking or aggressive non-slip surface superior crib stability compared to standard hardwood and softwood products. They will not fail catastrophically like wooden cribbing. In addition, unlike wood products, industrial cribbing blocks do not splinter or absorb most fluids. Convenient sizes help to quickly and safely build stable cribs to

AMN15210Super Stacker Cribbing Block 4”x4”x18” - Black• Interlocking or aggressive non-slip surface• Non-conducting plastic resists oil and most chemicals• Does not splinter, like wood• Certified and Tested• Multiple sizes, shapes fit most applications• Made in America

$1,580.00 $2,449.99

$159.99

$210.00

$70.00

82

SUPER DUTY

SUPER DUTY

SUPER DUTY

SUPER DUTY

INT5620SD20 Ton Super Duty Air/Hyd Bottle Jack• Welded tank and frame – for stronger performance in

rough service conditions and in the case of off-center loading• 1-1/8” thick base – provides stable lifting platform on poor surfaces• Proven air motor – quality tested and field tested to ensure consistent, reliable operation• High-strength steel ram and cylinder supported by a longer ram guide – better safety in off-center load conditions• Internal release screw – heavy duty internal release screw is protected by base design to avoid accidental release/damage• Can be operated by either air or manually; handle included; hose swivels for ease of operation; ASME 2009 compliant

INT5621SD20 Ton Low Profile Air/Hydraulic Bottle Jack• 7” low height works in the most extreme space constraints• Welded tank and frame for superior strength and leak free operation• Thick base design offers the most stable lifting platform even on poor surfaces• Dual return springs provide controlled and easy descent with or without shop air• Shielded release screw prevents accidental release/damage• Can be operated by either air or manually; handle included; hose swivels for ease

of operation; ASME 2009 compliant

INT5630SD30 Ton Super Duty Air/Hydraulic Bottle Jack• Fully welded tank and frame for superior strength and rugged durability• 1-1/8” thick base – provides stable lifting platform on poor surfaces• Specially engineered air motor for consistent and reliable operation• Dual return springs allow easy and controlled descent• Shielded release screw helps prevent accidental lowering or damage• Can be operated by either air or manually; handle included; hose swivels for ease of

operation; ASME 2009 compliant

INT5612SD12 Ton Super Duty Air/Hydraulic Bottle Jack• Fully welded tank and frame for superior strength and rugged durability• 1-1/8” thick base – provides stable lifting platform on poor surfaces• Specially engineered air motor for consistent and reliable operation• Dual return springs allow easy and controlled descent• Shielded release screw helps prevent accidental lowering or damage• Can be operated by either air or manually; handle included; hose swivels for ease of operation; ASME 2009 compliant

Part Number Capacity Low Height High Height LIFT Air Pressure Air Fitting Weight (LBS)

INT5612SD 12 Ton 9.92” 18.98” 5.91” 110-120 PSI 1/4” NPT 35

INT5620SD 20 Ton 10.37” 20.63” 6.38” 110-120 PSI 1/4” NPT 45

INT5621SD 20 Ton (Low Profile) 7.01” 12.76” 3.35” 110-120 PSI 1/4” NPT 36

INT5630SD 30 Ton 10.94” 20.59” 5.91” 110-120 PSI 1/4” NPT 65

$315.61

$371.41

$348.67

$465.91

83

Supplier Part Number Capacity Minimum Height Maximum Height Style

American Forge and Foundry INT3309A 10 Ton 18-1/2” 30” Pin Style

Hein Werner OMEHW93512 10 Ton 19-1/2” 31-1/2” Pin Style

Hein Werner OMEHW93511 (Freight Delivery) 10 Ton 30” 52 Pin Style

Omega OME32107 (Freight Delivery) 10 Ton 28” 47” Pin Style

Bosch OTC1784D 12 Ton 19-1/2” 30-3/4” Ratchet

K Tool XD KTI61211 12 Ton 17-1/2” 27-1/2” Ratchet

Omega OME32126 (Freight Delivery) 12 Ton 19-3/4” 30-1/4” Auto Ratchet

OTC OTC1779B 12 Ton 33-3/4” 44-1/4” Pin Style

OTC OTC1783 20 Ton 15-1/4” 24” Pin Style

AME AMN14400 22 Ton 9.5” 19.9” Pin Style

Bosch OTC1780 22 Ton 13-5/8” 19-5/8” Pin Style

K Tool HD KTI61222 22 Ton 11-7/8” 19-3/4” Pin Style

Sunex SUN1522 22 Ton 11-13/16” 19-3/4” Pin Style

Omega OME32225 22 Ton 12-1/2” 19.875” Pin Style

Hein Werner OMEHW93526F 25 Ton 12-3/8” 20-3/8” Pin Style

OMEHW93503 KTI61205OMEHW93526F OTC1780INT3309A

Supplier Part Number Capacity Minimum Height Maximum Height Air Assist

American Forge and Foundry INT3512 12 Ton 8.5” 17” N

K Tool KTI63214 12 Ton 7.48” 13.78” N

K Tool XD KTI63213 12 Ton 8.46” 15.75” N

Bosch OTC4313C 12 Ton 9.5” 18.375” Y

OTC OTC5213T 12 Ton 9-5/8” 22-1/2”

Sunex SUN4913A 12 Ton 7.48” 13.78” N

American Forge and Foundry INT3520 20 Ton 9.625” 18.25” N

American Forge and Foundry INT5520B 20 Ton 10.5” 20” Y

Bosch OTC4321C 20 Ton 9.4375” 17.6875” Y

EscoESC10446

20 Ton 9-5/8” 18-3/4”

K Tool XD KTI63221 20 Ton 9.6” 16.65” N

K Tool XD KTI63228 20 Ton 10.43” 19.88” Y

K Tool XD KTI63224 20 Ton 7.25” 11.75” N

Sunex SUN4920CAH 20 Ton 10.5” 20.1” Y

Sunex SUN4923A 20 Ton 6.5” 11.3” N

Sunex SUN4920A 20 Ton 9.3” 15.5” N

K Tool HD KTI63230 30 Ton 11.2” 18.27” N

OTC OTC9330 30 Ton 11” 17-5/8”

K Tool HD KTI63250 50 Ton 11.8” 18.8” N

OTC OTC9350 (Freight Delivery) 50 Ton 11-3/4” 18-15/16”

OTC4313CKTI63228

ESCO10446

OTC5213T OTC4321C SUN4920CAH INT5520BKTI63230

bottle jacks

jack stands

$238.08

$393.00

$196.00

$560.00

$47.84

$189.99

$320.75

$70.54

$47.84

$70.54

$133.85

$233.80

$329.55

$321.95

$66.99

$112.25

$110.63

$80.41

$113.91

$232.05

$285.75

$219.45

$424.49

$1,003.53

$423.29

$762.89

$747.99

$167.15

$166.99

$180.39

$232.05

$251.95

$222.57

$998.59

$256.99

84

ATEATTC306Truck Tire Changer, 14” - 46”• Handles rims from 4 1/4” to 56” and

tire diameters in excess of 97”• Two-speed hydraulic chuck• 5 different rim locking positions• Remote controlled tilting/shifting tool arm• Working tool with automatic rotation system

This Super Duty Atlas® truck tire changer can easily accommodate tires with a maximum width of up to 53”.

ATEATWBT-210Heavy Duty Truck Tire Balancer• R im sizes: 10”-32”Max. tire diameter: 47”Max. wheel weight: 440 lb.220 V/1-phase• Display in standard or metric units

ATEATTC301Tire Spreader• Handles rims from 3 3/8” to 27”

and tire diameters in excess of 63”• Changes tires with a maximum width of up to 30

1/2”5 different rim locking positions• Portable control unit220 Volt motor

KEN34555Shark Fin Dual Wheel Separation Bag• The first wheel separation solution for steel,

aluminum and chrome wheels• Shark Fin inflates to separate stuck or frozen

dual wheels without damaging the wheel• Works on 15” to 24.5” dual and single wheels

and tires on trucks and trailers• Portable, durable, and fast. Full inflation only

takes a matter of seconds

changers / spreaders / balancer

$9,995.00

$5,495.00

$3,495.00

$467.51

85

KEN30260

KEN29975

KEN30167

KEN34555

KEN35775

KEN35776

KEN33210

KEN29850

KEN34549

AMMCHD-9551Coats® Heavy-Duty Tire Changer• Offers the most automated features and widest range of

fittings in the CHD line• Remote-controlled rotating tool head/arm for the fastest,

easiest tool changes in the business• Optional wireless remote gives you freedom to move

around the machine without cumbersome cables• Handles rims from 14” to 46” (up to 56” with clamp

extensions) and tires up to 95” in diameter and 51” wide.• Weight (lbs): 2596.0000 • Operation: 4 Jaw Chuck• Wheel Handled: Budd & Dayton, Tube & Tubeless• Mount / Demount: Hook & Roller on Reversible Mount• Tool Head Offset: Automatic Permanent Mounted• Table Shape: Moving Table (Side-Mounted)• Wheel Clamping Method: 4 Jaw Chuck • Wheel Lift: Clamp Arm Lifting

• Frame Structure: Full Frame • Max Tire Diameter: 95” (2413mm)• Max Tire Width: 51” (1295mm) • Max Wheel Weight (lbs.): 3960• Min / Max Rim Diameter: 14”-46”

(47”-56” with clamping extensions)

TM

TM

TM

reCore®

Building on a rich history of over 97years of dependable American madequality and customer satisfaction,we are still leading the way withinnovative solutions.

Tire Valve Installers KEN29850

Watch our videos at www.youtube.com/KenToolVideoMedia & www.kentool.com

Ken-Tool • Akron, OH • Toll Free: 855-821-7309 • E-mail: [email protected] • To find a distributor near you go to www.kentool.com/distributors.html

TM

Air Brake Slack Adjusters Set No. KEN33210

Dual Wheel SeparatorKEN34549

TPMS

Stem Repair Kit KEN29975

Rust HogTM

Hub Cleaning Tool KEN30167

KEN34555

Shark Fin TM

Dual Wheel

Separation

Bag

MorTorq®

Pro Socket Set

KEN30260

8-IN-1 Wrenches SAE KEN35775, METRIC KEN35776

There is more to Ken-Tool® than tire irons & 4-way lug wrenches!There is more to Ken-Tool® than tire irons & 4-way lug wrenchesy lug wrs & 4

IT’S TIME TO TAKE ANOTHER LOOK...

$35,939.00

86

NEW

BRA2250Inflation Tire Cage 5 Bar• Works on commercial truck tires and super singles. • Added height of the 2200 series.• Stands 60” tall and comes with five bars. • Handle tires with a maximum width of 21.5” (cross section)

and maximum diameter of 54”.

TSICH-5Tire Bead Seating Tool• 5 gallon capacity ASME certified tank• Pre-set safety release valve (160 psi)• 90 degree on/off ball style discharge valve• Large easy read air gauge

KEN35926Heavy Duty Impact Bead Breaker• The wedge foot is forced between the bead and rim flange• Breaker is designed for shop or road use

KEN31444 Mega Air Blast™ Bead Seater• 5 gallon capacity• Handles up to 24.5” wheel size• Certified to ASME regulatory safety requirements• Used on auto, ATV, and truck tires.

GAIBB6LM6 Liter Bead Bazooka® Tommy Gun• Lightweight design• Comes with a three year warranty• The main valve is completely replaceable• Durable construction

GAIBB9LM9 Liter Bead Bazooka® Tommy Gun

tire bead tools

tire bead tools

The completely redesigned BEAD BAZOOKA® Tommy Gun is the most powerful tire inflation tool available. Thanks to its new 2’’ MIS valve (patent pending), the BEAD BAZOOKA® Tommy Gun is able to inflate even the most stubborn tires. In addition, the redesigned grips make it much more comfortable to operate and allow for better control. Unlike its predecessor, the BEAD BAZOOKA® Tommy Gun is completely serviceable and covered by a three year warranty.

$619.00

$239.00

$249.99

$297.60

$329.00

$399.00

87

ESC10821Yellow Jackit Economy Bead Breaker Kit• Works on single, two, and three piece wheel truck tires and rims• Works on some the newly styled wheels• Most popular tool for breaking beads on agricultural wheels• Can be used with any 10,000 psi air hydraulic pump• 3.75 inch stroke

ESC70150Slide Hammer• Breaks stubborn truck tire beads with ease• Spring action design• Prevents kick back• Wedge foot is forced between the bead and the rim flange delivering

a blow directly to the tip• Heavy duty tool

ESC70160Manual Bead Breaker• Manual bead breaker loosens tire bead from rim• Works on tire without removing the wheel from the tractor• Will also handle 38” and 42” 14 ply farm tractor and backhoe tires• Use also on small ATV and lawnmower tires• Do NOT use with Air Impact Wrench

TSICH-1212 Liter Steel Push-Button Bead Seater• Approximately 3 gallon steel ASME certified tank• Perfectly balanced for ease of operation• Patented push-button automatic discharge• Fast, simple and economical• Ergonomically designed for greater operator comfortThe “Cannon” is the newest addition to the Cheetah® line of bead seating tools. No valve to open…simply engage the automatic push button. The Cannon is designed for commercial use on all passenger light truck and some semi truck tires.

AMN71500Big Buddy Bead Breaker Slide Hammer• Easily breaks the most stubborn beads• User fatigue is reduced through spring action tip, which reduces

kick back• Wedge tip is forced between the tire bead and wheel rim delivering • the blow directly to the hammer tip• Heavy duty tool with 1 year warranty• Weight 24 lbs (11kg)

GAIGB-5Z5 Gallon Bead Booster• Release valve safety lock prevents

inadvertent discharge• Powder-coated inside and out to

protect from rust and deterioration caused by moisture

GAIGB-5ZA5 Gallon Automatic Bead Booster• Automatic valve releases air 20% faster than

manual valves, therefore requiring less pressure and making it safer to use• Push-button trigger allows user to keep both hands on

the tank, therefore maintaining control during useATERM-DSR77 Gallon Portable Aluminum Bead Seater• Portable and easy to use• 7 Gallon lightweight aluminum air tank• Pop-off safety valve• Schrader valve allows quick filling of

tank through standard air chuck

tire bead tools

$206.77

$842.29

$141.39

$385.00

$146.99

$273.85

$345.99

$279.00

88

GAIG12100Demount Tool for 17.5” - 24.5”• Demounts tire sizes 17.5”-24.5”• Only a single tool needed to demount tires.• Eliminates the need to lift the tire and

wheel making a hard job easy and protecting against insurance claims.

• Unique design protects valuable tire casings for retreading

• Handle design protects against damage to the tool and other objects that may come in contact.

TSITNT-100Tubeless Truck Tire Demounting and Mounting Tire Tool Set• Only one tool needed to demount tires

and one tool needed to mount tires• Tools will not damage tire beads saving

valuable casings for retreading• TNT-100-1 demount tool eliminates the need

to lift the tire and rim to remove bottom tire bead• Remount tubeless tires in as little as 20 seconds!• Some tubeless tires can be demounted and mounted

without removing the wheel from the vehicle• Quickly demount tires 17.5” to 24.5”• Can be used on tubeless truck tires including Super

Singles size 315• TNT demount tools are ideal for Dayton type (center

less) and Budd type disc wheels• 55” L x 11’ W x 11’ H; 33 lbs shipping weight

AMN71050Golden Buddy Tire Changing System• Demount tires: 17.5” - 24.5” and Super Singles up: - 315• Allows some tubeless tires to be de-mounted without removing

the wheel from the vehicle• Works on most radial and bias ply tires while steel construction

ensures strength and nylon rollers protect the beadKit Includes: mount tool assembly, demount assembly and bead keeper. Sold as a complete set for one low price.

TSITNT100-1Demount Tire Tool• Tool will not damage tire beads

saving valuable casings for retreading

• TNT-100-1 demount tool eliminates the need to lift

the tire and rim to remove bottom tire bead

• Quickly demount tires 17.5” to 24.5”

mounting & demountinghammers

KEN35359Heavy Duty Universal Wheel Weight Hammer• 34% larger strike area than typical wheel weight hammers• 28 oz. cast steel head with anti-marring replaceable hammer

faceReplaceable chromoly steel hook removes all clip-on wheel weights• Fiberglass handle with ergonomic industrial grip is chemical resistant and

4 times stronger than wood

KEN35323T35 Heavy Duty Tire Hammer• Used for mounting and demounting tires• Makes tire changing faster and easier for passenger car,

truck, bus, farm tractor, and aircraft tires• Non-marring rubber end can be used for driving on lock rings• Wood handle • 16-1/2” length

KEN35425TG36 Heavy Duty Tire Hammer• Used for mounting and demounting tires• Makes tire changing faster and easier for passenger car,

truck, bus, farm tractor, and aircraft tires• Non-marring rubber end can be used for driving on lock rings• Fiberglass handle• 18” length

KEN3542932” Duck-Billed Bead Breaking Wedge with Fiberglass Handle• Handled bead-breaking wedges for use on passenger, truck, bus, farm,

tractor, and aircraft tires• Use with soft- face hammers• Breaks beads quickly and easily• Handle serves as lever to push bead away from rim• 32” (81.3 cm) 8-1/2 lbs (3.9 kg)

OTC5789ID-103210 lb., 32” Tire Service Hammer, Indestructible Handle• Indestructible handle never needs replacement

• Outlasts wood and fiberglass handle hammers by well over • 30,000 overstrikes

• Ergonomic rubber grip handle reinforced with steel bars resists breaking while

absorbing impact and vibration

• Drop forged head is induction-hardened for long life, and contains steel locking

plates that are specially bonded to ensure the head never becomes loose

• Lifetime Marathon Warranty - you break it (good luck!), we replace it, no question

$423.69

$765.00

$499.99

$679.69

$134.19

$209.99

$52.80

$95.45

$143.53

89

KEN3464741” Heavy Duty Truck Tubeless Tire Iron• Patented one-piece design and heat treating assure durability • Rounded tip ends insert easily and will not cut or rip bead or sidewall • Stock: 7/8”

KEN3464437” Mount / Dismount Tire Tool • 3/4” diameter bar special tip on one end for grabbing the rim• Design allows for less effort, provides excellent wheel/rim surface

contact area for less side to side movement• Tip on one end for ‘grabbing’ the rim

KEN3464537” Truck Mount/Demount Tire Iron • Patented design offers one piece construction, and assures long life for many tire changing applications• Rounded tip ends insert easily and will not cut or rip bead or sidewall• The new design makes it easier to mount and demount tires without

changing the way the tool is used

KEN3474736” Straight Tubeless Mount/Demount Tool • Length: 36” • Stock: 3/4” • Weight: 4-1/2 lbs Use on standard and large truck tires, including industrial, farm, buses and tractors.

KEN3464837” Heavy Duty Lock Ring Tool• Removes continuous side rings on two piece truck rims• Use for multi-piece wheels, especially hub type

KEN3464952” T45AS Super Duty Tubeless Truck Tire Iron• Precision forged ends, heat-treated throughout for a tough,

slip-free grip on the rim and bead• Mount end has unique, trademarked curved design to always grab the bead• 7/8” shaft for strength and durability

KEN3484752” Straight Mount / Demount Tire Iron• Standard tubeless - for use on truck, agricultural and industrial tires• Patented one-piece design & heat treated to assure durability

OTC5735-3535” Double End Curved and Flat Tip Curved Tire Spoon

Tire Spoons• Unique “Convex Slip Head” curved design allows the spoon to

slide easily into the tire bead while the spoon bump limits the depth for quick-and-easy operation

• Handle knob enables easier spoon pick up• 3/4” diameter

KEN32319TR5A 30” Long Truck Wrench Handle• Eight inches longer than standard TR5 (32318) Truck Wrench Handle• Longer length provides greater leverage

KEN35595TC95 Heavy Duty Truck Lug Wrench• Combination wrench fits SAE and metric• 1-1/2”, 13/16” square, 30mm and 33mm• Use on heavy duty trucks, buses, and tractors• Center hole for a leverage bar

IPA9068Tire Comparator™ (Type III)• For mated tires with ¼” overall tolerance

• The simple-to-use sliding tolerance gauge requires no

measuring, guessing, or even visual inspection

• Just hold it against the tire and slide the gauge across the

treads for a quick reading every time

• Can be used on any dual mated tires

• Lightweight and portable

• Also available, #9067 for ½” tolerances

mounting & demounting

$92.55

$83.05

$66.09

$70.55

$73.15

$158.59

$109.39

$88.10

$35.95

$108.75

$157.85

90

ESC70100Easy Way Truck Tire Demount Tool• Demount tubeless truck tires in seconds• No damage to aluminum or painted wheels• Never lift tire to demount rear or bottom bead• Lifetime warranty• Never lift tire to demount rear or bottom bead

Tubeless Truck Tire Demounting System. Demounts 16.5” to 24.5” Diameter Truck Tires in seconds. No damage to aluminum or painted wheels using the included rim protector 70103. Consists of the 70101 top bead demount tool, 70102 bottom bead demount tool and 70103 Rim Protector.

ESC90518-100-1Tire Demount Tool• Demounts tire sizes 17.5 up to 24.5• Only lift tire once• Does not damage beads• Demounts tire in less than 30 seconds• Rubber coated handle for support

KEN35444Deluxe Blue Cobra™ Truck Tire Service Set• 10 Piece Set• Contains all of the tools you need to change most

22.5”and 24.5” tubeless truck tires quickly and easily• Ships in one cartonSet Contains1 - Blue Cobra™ Truck Tire Demount Tool1 - T45A 37” Tubeless Tire Iron1 - 30” Double-End Tire Spoon1 - 8# Bucket Euro Paste Lube1 - Euro-Style Lube Applicator Brush2 - Aluminum C-Lok™ Bead Holder

KEN35440Blue Cobra™ Truck Tire Demount Tool• Quickly demount nearly any 20”, 22.5” and 24.5”

tube-type and tubeless truck tire, up to a 13” wide wheel• Ergonomic shaped steel handle with no-slip grip for

optimum leverage while reducing back injuries• Allows tire demounting without lifting the wheel assembly• Made of durable high-quality steel• Comes with 31810 Leather Rim Protector

age ectectectector or or or or or or

102102102102102102

KEN321142 Piece Small Tire Iron Set• T5 (KEN32115) - Ideal for demounting small tires• T8 (KEN32118) - Ideal for mounting small tires• Sturdy, comfortable plastic handles• Rounded ends will not pinch tube• Length: 16”; Stock: 7/16”; Weight .8 lbs

Small Tire Iron SetN32115) - Ideal for demounting small tires

(KEN32118) - Ideal for mounting small tiresturdy, comfortable plastic handlesounded ends will not pinch tube

• Length: 16”; Stock: 7/16”; Weight .8 lbs

1 - Leather Rim Protector1 - T11ES Bead Breaking Wedge

With Safety Handle1 - T35 H.D. Tire Hammer

ESC60305EZ Buster Torque Multiplier• Safely removes corroded, rusted, overtightened, and lugs• Lightweight, weighs less than 20 lbs• Comes with 32 and 33mm nuts• EZ winder action allows for fast removal of stubborn nuts• Effortless design

val

ESC90518-200MMounting Tool• Fits all rims for easy mounting

• Works on all truck tires including Super Singles

• Rubber coated handle for non-slip grip

• Does not damage the wheel

• Mount tire in less than 30 seconds

mounting & demounting

$579.99

$40.19

$356.99

$366.06

$342.25

$163.25

$156.24

91

ACC20-41003/4” Drive Heavy Duty Torque Set• Patented strobe marks stop turning at precisely

the correct torque on each and every job• Engineered for rugged professional

environments, each torque stick is manufactured with heat treated Swedish spring steel and boasts a solid one piece design

• Includes color coded application chart• ISO 9001 certified• Lifetime guarantee

ACC20-40004 Piece 1” Drive Heavy Duty Torque Socket Set• Original HD-AT4• Heavy-duty bracket included• The BEST raw materials, specially heat-

treated, make AccuTorq® the most accurate torque socket in the world

KTI74640Axle Drain Pan• Durable and lightweight HDPE plastic with built-

in drop proof spouts that help to recycle oil• Works for most dual and super single wheels,

sizes 22.5 and 24.5

LIS19852Truck and Trailer Wheel Pan• Prevents oil mess during wheel repair• Fits rims with 13-3/4” ID and larger

AMN67300Nut Buddy• Busts loose the most stubborn wheel nuts• Use on commercial or agricultural wheels• Gear ratio: 58:1• Rated output torque: 2950 ft lbs• Two sockets included:

1-1/2” (38mm) and 1-5/16 (33mm)

Comes with black Nut Buddy carrying case.

AMN71630Complete Heavy Duty Wheel Puller Kit - Single Hook• Eliminates need to crawl under vehicle• No need to use sledge hammer to

seperate stuck wheels• Saves time and improves safety

AMN15300Molded Rubber Wheel Chock• Durable rubber construction• Features an eye bolt for chain or rope attachment• Ribbed pyramid design• Either side of wheel chock can be positioned against the tire• Sold individually. Weight - 10 lbs (4.5kg)

ESC40125Skirt Nut• Stops wheel/hub vibrations • No more loose wheels• Prevents wheel ‘clocking’ on hub piloted wheels• Meets and exceeds standards of SAEJ1965 for torque tension• Eliminates wasted fuel caused by rolling resistance ‘drag”

ESC60301Budd Nut Wrench (Pork Chop), 1-1/2” and 38mm• Pork Chop style-New design; cannot slip out of the rim hole• Won’t damage aluminum wheels • Holds outer cap nut securely• Replaceable polymer covered tail

KEN354534 Piece Serpent™ Tire Changing Set• KEN35449 Demount Tool: demounts both beads,

no more lifting the tire/wheel assembly off the ground• KEN35450 Mount Bar: wing shape is designed to stop against the

rim, won’t slip into wheel well; small end of tool easily gets under the stretched bead for that last pull

• KEN31710 Bead Holding Device: Holds the bead in place against the wheel while mounting a tire

• KEN31810 Wheel Protector: Protects wheel rims from damage

• High Chromium Steel Construction• Includes (2) pulling ends to ensure

versatility on wheel types

$527.26

$558.97

$26.99

$14.49

$253.35

$659.29

$34.59

$8.75

$16.73

$139.99

92

SGT65130Truck Tire Inflator with Dial Gauge• Extra long reach 14” dual head chuck with internal lock on threads

inflates in both straight and offset positions• Easy to read, dual calibrated scales (0-160 PSI and 0-1100 kPa)• Ideal for use with heavy duty trucks, buses, RV’s and motor homes

AMN24869Dura-flate Digital Tire Inflator• 20” Hose Range 0-174psi• Supply Pressure: Maximum 200 p.s.i. (1380 kPa) /

Minimum 100 p.s.i. (690 kPa)• Connection: Inlet 1/4” NPT. internal thread• Hose length: 19.7”• Dual hold-on chuck• Body: Die cast aluminum with steel operating lever and

impact absorbig bumpers. Laser etched serial number.

AMN24867Digital Tire Inflator• 6”Hose Maximum Pressure: 174psi • 3-in-1 function: inflate, deflate, measure tire pressure• Backlight LCD with 90 second auto off• Units of measurement: PSI, BAR, kPA• Die cast aluminium unit with rubber sleeve• Ideal for tire fittersDie cast aluminium unit with rubber sleeve. Supplied with official calibration certificate. Ideal for tire fitters. Backlight LCD with 90 second auto off. Advance digital high precision reading. 3-in-1 function: inflate, deflate, measure tire pressure. Accuracy: ± 2 PSI. Fully automated. Units of measurement: PSI, BAR, kPA.

AMN24868Easy-Flate Digital Tire Inflator• 3-in-1 function: Inflates, deflates, measures

tyre pressure with a 5’ hose and clip on chuck• Auto-off after 90 seconds• Max pressure: 174 p.s.i.• Ideal for cars, trucks, bikes etc.• Rechargeable Lithium-Ion battery

OTC4526Heavy-Duty Single Pressure Beam Bearing Splitter Set• Single point of adjustment allows quick attachment of splitter to the application• Push Puller is thread matched to the splitter• Interchangeable legs shorten or lengthen the range of pull• For use on most bushing or bearing jobs up to 4” in diameter

OTC5085Hub Oil Seal Puller• Eliminates bearing and hub damage that can occur when a

punch and hammer is used to remove the seal• Extra long 28” handle provides leverage, unique pulling head

design quickly and easily removes the seal in one piece• Built from the highest quality heat treated steel

OTC7180Universal Bearing Cup Installer• Works on axles from 11,000 to 50,000 lb. capacity• Adjust to fit 3-5/8” to 6-1/2” O.D. bearing cups,

which adds up to as many as 30 individual drivers

$51.55

$109.99

$112.99

$389.76

$230.69

$157.59

$348.99

93

EZREZLINEWheel Laser Alignment Tool• All measurements can be taken in under 10 minutes• E-Z precise axle and wheel alignment• For heavy trucks, all types of trailers• Compact design, easy transport and toolbox storage• Multipurpose measurement capabilities

The “EZ Line” has many other uses in the Automotive and Commercial Vehicle Industry. A straight steel bar and bungee cord are all you need in addition to the EZ line, to set the toe on any vehicle, including trucks, that have an “in” or “Out” toe setting. Includes: 4 magnetic self-centering lasers, measuring tape, 2 magnetic 5th wheel pin adapters and a durable storage/travel case.

EZREZLINEB1SWComplete Alignment Tool Package With Software• Includes everything shown above, plus software, hub and bar adapters

ATECOMBO-801-STDA29LTruck Alignment Machine Combo• Precision CCD Measuring• Includes 35”-50” non-runout 3-pt FastClamp wheel clamps• Premium software including help images, trailer program, multi-axles, busses and coaches, and light trucks• Premium software including help images, trailer program, multi-axles, busses and coaches, and light trucks• Includes pair of heavy-duty truck turntables, trailer fixture and calibration barThe Atlas® 801 truck alignment system features Bluetooth® wireless data transmission and is customized for all truck axle configurations — 2, 3, 4 and 5 axle configurations. This system combines blazing speed, precision accuracy, and reliable Bluetooth® wireless communication all at a very affordable cost. It is PC Driven using high quality components and prints detailed alignment reports, then stores these reports on its hard drive for future retrieval. The Atlas® 801 Truck FastClamp system allows the operator to perform alignments on a level floor without the need for a truck lift. Truck FastClamps require no lateral run-out compensation, so accurate measurements are obtained.

$720.25

$2,755.00

$27,995.00

94

Freight Terms

• Freight delivery shipments must be inspected for damage and loss. • Inspect for obvious damage and concealed damage.• Confirm carton/pallet count. • Refuse shipment or notate damage/loss on delivery document.• Accepting and signing for a damaged or a short shipment releases the carrier and distributor from any claim responsibility.• Additional services provided by the carrier such as, lift-gate, residential delivery or special handling will incur additional freight charges.

AC Delco (ACD) .............................................. 21Accu-Torq (ACC) ............................................ 91Aircat (ACA) .................................................. 4,6ALC Keysco (ALC) .......................................... 50AME International (AMN) .................................... ............................. 72,74,78,81,83,87-88,91-92American Forge & Foundry (INT) ........................ ............................................. 53,67,71,73,82,83American Imc (IMC) .................................. 61,96American Power Pull (AMG) ........................... 56Ammco (AMM) ............................................... 85Ancra / S Line (ACR)....................................... 56Associated Equipment (ASO) ..................... 24,25Astro Pneumatic Tool (AST) ....................... 18,53Atlas Automotive Equ (ATE) ................................ ................................... 57,66,67,78,84,87,93,96Autel Tech (AUL) .................................... 1,27,30Back Buddy (BBD) .......................................... 78Bend-Pak (BEN) ............................................. 51Blackhawk / Shinn Fu Company (BHK) ........... 80Bosch (BOS) ...................................... 1,30,36,95Branick Industries, Inc. (BRA) ......................... 86Cal Van / Horizon Tool (CAL) ........................... 41Cando Int’l (CDO) ...................................... 31,37Carrand (CRD) ................................................ 59Central Tools, Inc. (CEN) ................................ 20Channellock Inc. (CHA) .............................. 19,41Chicago Pneumatic (CPT) ......................... 5,7,21Cojali USA (COJ)............................................. 33Cooper Tools (CRS) ........................................ 16CPS Products, Inc. (CPS) ................................ 62DeWalt (DWT) ................................................ 55

Drew Technologies (DRW) .............................. 31Esco Equipment (ESC) ........................................ ................................... 21,73,74,79,83,87,90,91E-Z Red Company (EZR) ............................ 16,93FJC, Inc. (FJC) .......................................... 25,62Fowler (FOW) ................................................. 20Gaither Tool (GAI) ................................. 86,87,88Gearwrench (KDT) ....................................... 5,18Goodall Mfg. (GDL) ......................................... 26Grey Pneumatic (GRE) ..................... 12,13,14,40Induction Innovations (IDI) .............................. 56Ingersoll Rand (IRT) ....................... 4,6,8,9,11,61Innovative Products Of America (IPA) ................. ................................... 34,35,38,41,44,59,64,89John Dow Industries (DOW)... 41,42,48,49,51,64K Tool International (KTI) .......... 1,6,12,15,16,18, ....................................... 19,20,21,25,43,46,57, .............................. 60,69,70,71,73,80,83,91,96Kastar / Lang / A&E Hand Tools (KAS) ....... 39,40Ken-tool (KEN) ............ 40,84,85,86,88,89,90,91Launch Tech USA (LAU) ................................. 31Legacy Manufacturing (LEG) ..................... 59,60Lincoln Electric (LEW) .................................... 56Lincoln Lubrication / Industrial (LIN) ................... ................................... 41,42,43,44,45,47,48,60Lisle Corp (LIS) ........... 34,36,38,39,41,42,46,91Lock Technology, Inc. (LTI) ............................ 39Makita (MAK) ................................................. 11Mastercool, Inc (MSC) .................................... 62Mayhew Tools (MAY) ..................................... 19Midtronics Inc. (MID) ................................. 23,25Milwaukee (MLW) ................................ 10,11,47

Milwaukee Sprayer-Sure Shot (SUR) .............. 46Mityvac (MIT) ................................................. 38Mountain (MTN) ................................ 5,20,60,63Mueller-Kueps (MLK) ................................ 18,54New Pig Corp (NPG) ....................................... 48Nexiq Technologies (MPS) ......................... 32,33Noregon Systems (NRS) ............................ 28,29Omega (OME) ..... 3,52,58,68,69,70,73,78,80,83OTC (OTC) .................. 15,16,19,25,30,37,38,39, .............. 40,49,51,52,53,58,64,65,68,69,70,71, ............... 72,74,75,76,77,78,79,80,83,88,89,92Plews (PLW) ................................................... 64Port-A-Cool (POR) ..................................... 63,96Power Probe Inc. (PPR) ............................. 36,37Precision Instruments, Inc. (PRE) .................... 20Robinair (ROB) ............................................... 62Rockford (RFD) .............................................. 22S and G Tool Aid (SGT) .............................. 34,92Schumacher/DSR (SCU) ............................ 22,23Solar / Clore Automotive (SOL) ........ 22,23,24,25Sunex International (SUN) ............. 4,8,12,13,14, ................................... 15,17,54,55,69,72,80,83Thexton Mfg Co. (THX) ................................... 64Tire Service Equipment (TSI) ................ 86,87,88Titan (TIT) ...................................................... 19Traxion Engineered Products (TRX) ................ 58Tuthill Transfer Systems (FIL) ............... 44,46,64Uview (UVU) ................................................... 38V-8 Tools (V8T) .............................................. 16Waekon Corporation (WAE) ............................ 37Wilton (WIL) .............................................. 18,57Wilton-Jet (JET) ................................... 55,56,68

4-Post Lifts ................................66Abrasive Blasting .......................50Adjustable Wrenches .................16Air Compressors ..........................9Air Conditioning (AC) ..................62Air Tools ...................................5-8Alignment Tools .........................93Axle Jacks .................................72Axle Nut Sockets ........................40Barrel Kits ....................................8Bead Tools .................................87Bench Grinders ..........................55Booster Cables ..........................25Bottle Jacks ..........................82-83Brakes, Axles and Chassis ....39-40Cabinet Blasters ........................50Charging / Starting................22-26Chassis .................................39-40Chrome Sockets Sets .................18Clutch & Flywheel Handlers .......75Compressors .............................61Cooling Testers ..........................38Cordless Tools ......................10-11Creepers & Seats .......................58Cribbing Block Sets....................81DEF (Diesel Emission Fluid) ........64Demounting / Mounting Tools .....................................................88-90

Diagnostics .................3, 27-37, 95Diesel Emission Fluids (DEF) ......64Diesel Particulate Filters (DPF) ...65Differential .................................49Dollies and Lifts ....................78-79DPF (Diesel Particulate Filters) ...65Drains ........................................42Drill Presses ..............................55Electrical....................................34Engine Stands ............................76Fans ..........................................63Filter Crushers ...........................51Fleet Tank Sweeper ...................59Floor Cranes ..............................77Fluid Dispensing & Waste ..........41Fuel Systems Tools ....................38Funnels......................................46Gas Caddies .........................48-49Generators / Start-Alls ...............26Grease Guns ..............................47Grease Pumps ...........................43Hammers .........................8, 18, 88Hand Tools ...........................16-19Hoists ........................................68Hoses ...................................59-60Hydraulic Jacks ...........................4Impact Socket Accessories ........15Impact Sockets .....................12-15

Impact Wrenches .......... 4-8, 10-11Jack Plates ................................81Jack Stands ...........................3, 83Lifting & Hydraulics ...............66-83Lubrication & Fluid Handling .......................................................41-48Measurements ...........................20Mounting / Demounting Tools .....................................................88-90Needle Scalers .............................8Oil Change Tools ..................38, 41Pliers .........................................19Portable Hydraulic Sets ..............80Power Trains .............................75Press & Pull Sleeve Sets ............18Pry Bars & Jimmy Bars ..............19Punch Set ..................................20Radiator Cleaners ......................59Ramps .......................................80Refrigerant Recyclers .................62Scan Tools and Software ......................................................29-33, 95Service Jacks .......................69-70Shop Equipment ...................50-63Shop Presses ....................4, 52-54Sockets Sets ..............................19Specialty Jacks ..........................74Specialty Testers ..................36-37

Specialty Tools ..........................39Spill Kits ....................................48Start-Alls / Generators ...............26Starting / Charging................22-26Testers .................................24-25Tire and Wheel Service .........84-92Tire Balancers ...........................84Tire Bead Tools ..........................86Tire Cages .................................86Tire Changers .......................84-85Tire Inflators and Gauges ...........92Tire Spreaders ...........................84Torque Tools .........................20-21Torque Wrenches ..................20-21Trailer Testers ......................34-35Transfer Pumps .........................44Transmission & Differential ........49Transmission Jacks ..........4, 70-71Transmission Tools ....................39Truck Hydraulic Jacks...........72-73Truck Lifts ............................67-68Underhood Service .....................38Vises..........................................57Washer Cabinets ........................57Welding .....................................56Wheel Service Sets ....................14Wrenches .................16-17, 20, 85

95

BOS3824

Bidirectional tests and engine adjustments

Wiring diagrams, component info and electrical specs

Engine coverage for Caterpillar, Cummins, Detroit Diesel-MBE,

Deutz, MTU, Navistar, PACCAR, Perkins and Volvo, and includes

medium- and light-duty software.

HD diagnostics coverage for Freightliner, International, Kenworth,

Mack, Volvo, Peterbilt, Sterling, Westernstar, MD Trucks, Sprinter

Van, Isuzu, GM and Ford.

Unmatched heavy-duty diagnostics

BOS3824 ESI[truck] HD Diagnostics

Mack, Volvo, Peterbilt, Sterling, Westernstar, MD Trucks, Sprinter

Van, Isuzu, GM and Ford.

PR

ES

OR

TE

DS

TA

ND

AR

DU

.S. P

OS

TA

GE

PA

IDP

ER

MIT

#75

LA

KE

LA

ND

, F

L

P.O

Box 9

0009

Lakela

nd, F

l 33804

This advertisement was prepared in advance, therefore merchandise availability is subject to delivery by

manufacturers as scheduled. All advertised items are not stocked by all stores. Not responsible for typographical or

pictorial errors. Quantities limited. CAUTION: Always wear appropriate safety equipment and observe safety advice

and proper use of equipment as instructed in warning and caution labels and operational instructions.

Pricing good through October 31, 2017 SUMMER

2017

IMC3G3HHL

13 HP Honda Two Stage Engine Powered Compressor• See page 61

KTI71002

BluBird Air Hose Reel 1/2” x 50’• See page 60

ATESL-STD-750

1250 LB / 53 GAL Capacity Spray Wash Cabinet• See page 57

PORPACHR3701F1

48” Portacool Hurricane 370• See page 63

AT

1GSC•

IM

1TEPC•

Equipped with KUUL Evaporative Media

25.25 ACFM

$3,109.00

$168.75

$3,995.00

$5,995.00

2017 - Hoover Truck and Bus Centers

Documents

Transcript of 2017 - Hoover Truck and Bus Centers