159-220 Precision.indd - Havoger Group

www.havoger.com [email protected]

PRECISION EQUIPMENT

E159

Micrometers

WHOLESALE TOOL MICROMETER SETS

0-3" MIC SET.001" Graduations.Order No. 1251-9960

$25.25

6-12" MIC SET.0001 Graduations.

Order No. 1251-9986

$175.50Reg. $199.00


Order No. 1251-9990

$81.25Reg. $154.00

6 PC. 0-6" MICROMETER SET WITH 6" DIAL CALIPER

Choose your set by caliper color…

WHITE CALIPER SETOrder No. 1251-9991

$92.95/Set

BLACK CALIPER SETOrder No. 1251-9988

$92.95/SetMicrometers:Ratchet type, accuracy .001", graduations .0001", carbide face, anvil and spindle hardened & ground with micro-lapped finish on ends. Regular selling price (Sold without caliper) is $79.95.

6" Dial Caliper:.100" revolution, .001" graduations. 4-way measurement; inside, outside, depth and step. Vernier readings; inches. Stainless steel, hardened surface. Complete with fitted case. Regular selling price is $16.95.

12 PC. 0-12" MICROMETER SET WITH 12" DIAL CALIPER

Micrometers:.0001 graduations. Carbide face, ratchet thimble, positive locking clamp. Each mic complete with setting standard. Enamel painted steel frames. Regular selling price (sold without caliper) is $259.00.

Dial Caliper:Inside, outside, depth and step measurement. Vernier readings; inch. Stainless steel hardened surface, adjustable non-glare dial, satin chrome finish, .001" graduations, .100 revolution. Fitted case or pouch. Accuracy .001" per 6". With your choice of white or black dial on caliper. Regular selling price is $45.00.

Complete with Standards & Handsome Wooden CasesRatchet thimble, high quality carbide faces. Positive lock clamps.

Adjustable for wear. Enamel finish.


(Packaged in separate boxes.)

Order No. 1251-9979

$28.00 0-3" MIC SET.0001 Graduations.

Order No. 1251-9980

$36.50Reg. $59.95

Choose your set by caliper color…

WHITE CALIPER SETOrder No. 1251-9987

$262.00/set

BLACK CALIPER SETOrder No. 1251-9983

$262.00 /set

0-4" MIC SET.0001 Graduations.Order No. 1251-9981

$54.00


Order No. 1251-9985

$245.95Reg. $349.00


PRECISION EQUIPMENT

E160

Micrometers

MICROMETER SETSSeries 436 Attractive Protective Cases, Ratchet Stops & Lock Nut Supplied with Standards. Recommended for mechanics, automotive service and machine shops, tool-rooms, inspection departments and wherever gaging involves a wide range of measurements. All sets come in attractive, protective cases which keep micrometers and standards together, readily accessible.

Steel Face .001" Graduation Measuring Starrett Order Price Range Number Number Each 0-3 S436ARLSZ 1240-0220 $469.00 0-4 S436BRLSZ 1240-0225 678.00 0-6 S436CRLSZ 1240-0230 1,145.00 6-12 S436DRLSZ 1240-0235 2,061.00 0-12 S436ERLSZ 1240-0240 3,182.00

Carbide Tipped .0001" Graduation Measuring Starrett Order Price Range Number Number Each 0-3 ST436AXRLSZ 1240-0250 $492.00 0-4 ST436BXRLSZ 1240-0255 716.00 0-6 ST436CXRLSZ 1240-0260 1,198.00 6-12 ST436DXRLSZ 1240-0265 2,127.00 0-12 ST436EXRLSZ 1240-0270 3,305.00

MICROMETER SETS

Each micrometer set includes a fitted

mahogany case. Micrometers in each set

include the standard features listed at left.

Model Order Price Size Number Number Each *1" 599-657-16 1330-1600 $18.50 2" 599-9655-2 1330-1605 22.00 3" 599-9655-3 1330-1610 30.00 4" 599-9655-4 1330-1615 33.00 5" 599-9655-5 1330-1620 34.00

B & S MICROMETER STANDARDS

For calibrating mics and zeroing vernier, dial, and digital calipers. (Model 599-9655-3 shown).

0-6" Model 340-351 Order No. 1259-1235 ................. $634.006-12" Model 340-352 Order No. 1259-1240 ............... $780.00Uses SPC Connecting Cable: 937387 (1M) 965013 (2M)

Model 340-352 Shown

DIGIMATIC INTERCHANGEABLE ANVIL MIC SETS.00005”/0.001mm ResolutionSPC OutputStandards SuppliedInch/mm, Preset, Zero/ABSRatchet Stop

MICROMETER STANDARDSSeries 167All Standards come with a handle which prevents expansion due to body temperature. Heat insulating handle. Flat and lapped measuring ends. Larger sizes are chrome plated. Flatness within 0.3µm. Parallelism within 2µm.

Order Price Size Accuracy Number Each 1" ±.00005" 1250-0301 $18.50 2" ±.0001" 1250-0302 19.00 3" ±.0001" 1250-0303 22.80 4" ±.0001" 1250-0304 27.00 5" ±.00015" 1250-0305 29.30 6" ±.00015" 1250-0306 34.70 7" ±.00015" 1250-0307 38.50 8" ±.00015" 1250-0308 40.00 9" ±.0002" 1250-0309 42.40 10" ±.0002" 1250-0310 47.30 11" ±.0002" 1250-0311 50.00 12" ±.00025" 1250-0312 55.00

MICROMETER SETSSeries 103 All Mic Sets are furnished with carrying case

MTI No. of Order Price Model Range Graduation Standards Number Each 103-922 0-3" .0001" 2 1250-0130 $373.00 103-907-01* 0-6" .0001" 5 1250-0135 886.00 103-933 0-6" .0001 6 1250-0260 553.00* With Ratchet stop

B&S With Order Price Model Range Standards Number Each 599-181-923 0-3" No 1330-0935 $389.00 599-181-923-1 0-3" Yes 1330-0940 424.00 599-181-924 0-4" No 1330-0945 523.00 599-181-924-1 0-4" Yes 1330-0950 579.00 599-182-926 0-6" No 1330-0955 889.00 599-182-926-1 0-6" Yes 1330-0960 995.00


PRECISION EQUIPMENT

E161

Micrometers

WT METRIC MICROMETERS

ECONOMY MICS.0001" GraduationsRatchet th imble for p r e c i s e r e p e t i t i v e readings. Flatness .00003; pa ra l l e l i sm .00005 ; accuracy .0001; carbide face. Anvil and spindle hardened and ground with micro-lap finish on ends. Balanced design, hardened threads. In wood box.

Order Price Price Size Number Each Ea./3 0-1" 1251-0005 $12.95 $11.95 1-2" 1251-0010 15.95 13.95 2-3" 1251-0015 18.95 17.95 3-4" 1251-0040 21.95 19.95 4-5" 1251-0045 24.95 20.95 5-6" 1251-0050 30.95 26.50

0-1" Order No. 1251-0055 .................................................$11.951-2" Order No. 1251-0060 ................................................ $13.952-3" Order No. 1251-0065 ................................................ $17.953-4" Order No. 1251-0067 ................................................ $19.954-5" Order No. 1251-0070 ................................................ $20.955-6" Order No. 1251-0075 ................................................ $26.50

ECONOMY MICS.001" Graduations

Ratchet thimble, carbide faces. Positive lock clamp. Adjustable for wear. Anvil and spindle are hardened and ground. Includes fitted cases, 2"-6" micrometers come with standards.

2 Pc. 0-50mmComes packed in seperate boxes.Order No. 1243-9980 ....$23.95

0-25mm Order No. 1243-0025 ................................ $11.9525-50mm Order No. 1243-0030 ................................$13.95

METRIC MICROMETERS

.01mm GraduationsRatchet thimble, carbide faces. Positive lock clamp. Adjustable for wear. Anvil and spindle are hardened and ground. With standards and fitted case.

METRIC MICROMETER SETS .01mm Graduations

DIGIT-OUTSIDE MICROMETERSDirect Digital ReadingFlatness: .00003"Graduation & accuracy: .0001"Parallelism: .00005" for 0-1 range models. Carbide measuring faces. Positive locking nut. Digital counter indicates directly to thousandths. The “tenths” scale is vernier. With box.

0-3" Set Order No. 1245-0030 .....................................$69.950-4" Set Order No. 1245-0035 .....................................$89.95(4" Set packed in separate boxes)

Order Reg. Sale Range Number Price Price *0-1 1245-0006 $39.00 $17.95 0-1" 1245-0010 45.90 19.95 1-2" 1245-0015 59.46 21.95 2-3" 1245-0020 68.19 24.50 3-4" 1245-0025 76.00 27.50*.001 Graduations

ELECTRONIC MICROMETER

.0001"/.001mm GraduationLarge easy to read LCD readout. Instant inch/mm conversion. Floating Zero. Ratchet thimble stop. Carbide measuring faces. Spindle lock. Satin chrome spindle. Comes with case.

Range 0-1"/0-25mm Order No. 1266-0020 ..............$49.00Range 1-2"/25-50mm Order No. 1266-0022 ............$69.00Range 2-3"/50-75mm Order No. 1266-0024 ............$89.00All 3 Listed Above Order No. 1266-0030 ..... ONLY $199.00

1266-0030

MICROMETERSSat in chrome th imble . .0001" reading. Straight line graduations. Black enamel frame. Spindle lock. Tungsten carbide tipped faces. Fixed friction thimble. Meets Federal specifications.

B&S Order Price Range Model Number Each 0-1" 599-1-44 1330-0875 $96.90 1-2" 599-2-44 1330-0880 107.00 2-3" 599-3-44 1330-0885 109.00 3-4" 599-4-44 1330-0890 113.00 4-5" 599-5-44 1330-0895 119.00 5-6" 599-6-44 1330-0900 128.00 6-7" 599-7-44 1330-0905 223.00 7-8" 599-8-44 1330-0910 226.00

ELECTRONIC DIGITAL MICROMETERRugged digital micrometers with simple functions and an excellent price performance ratio. Features: Ratchet type, 2 button operation. Easy operation. Display data is origin data of absolute measurement after changing battery. Painted frame. Carbide measuring faces. Ratchet friction thimble. One SR44 battery. Power consumption <35µ A. Auto power off. Resolution: 0.001mm (Metric); 0.00005” (inch).

0-1"/0-25mm Order No. 1251-0200 ......................... $69.001-2"/25-50mm Order No. 1251-0205 ....................... $79.002-3"/50-75mm Order No. 1251-0210 ....................... $89.00

4 Pc. 0-100mmOrder No. 1243-0035 .... $57.95

Range 0-1" Order No. 1253-0005 ................................ $165.95Range 1-2" Order No. 1253-0010 ................................ $171.95

INDICATING MICROMETER.0001" GraduationEvery thousandth is numbered. All parts subject to wear are fully hardened. Convenient retracting button. Wider graduation. Easy zero adjustment. Carbide faces have jewelled bearings. Anvil & spindle hardened and precision ground, with microlapped finish on measuring faces. Complete with fitted case.


PRECISION EQUIPMENT

E162

Micrometers

Steel Face .001" Graduation

Measure Starrett Order Price Range Number Number Each 0-1 436RL-1 1240-0070 $111.00 1-2 436RL-2 1240-0075 127.00 2-3 436RL-3 1240-0080 157.00 3-4 436RL-4 1240-0085 178.00 4-5 436RL-5 1240-0090 193.00 5-6 436RL-6 1240-0095 209.00 6-7 436RL-7 1240-0100 240.00 7-8 436RL-8 1240-0105 259.00 8-9 436RL-9 1240-0110 274.00 9-10 436RL-10 1240-0115 287.00 10-11 436RL-11 1240-0120 301.00 11-12 436RL-12 1240-0125 318.00

Carbide Tipped .0001" Graduation

Measure Starrett Order Price Range Number Number Each 0-1 T436XRL-1 1240-0130 $113.00 1-2 T436XRL-2 1240-0135 138.00 2-3 T436XRL-3 1240-0140 171.00 3-4 T436XRL-4 1240-0145 187.00 4-5 T436XRL-5 1240-0150 202.00 5-6 T436XRL-6 1240-0155 220.00 6-7 T436XRL-7 1240-0160 251.00 7-8 T436XRL-8 1240-0165 271.00 8-9 T436XRL-9 1240-0170 282.00 9-10 T436XRL-10 1240-0175 299.00 10-11 T436XRL-11 1240-0180 316.00 11-12 T436XRL-12 1240-0185 325.00

MICROMETERSSeries 436 Furnished with a locknut and ratchet stop. Precision performance combines with strong lightweight rigidity, construction and moderate price to become the most popular Starrett micrometer series. Forged frames, ribbed for extra strength, have black baked enamel finish and are tapered for use in narrow slots and tight places. Designed with correct thimble diameter for perfect balance and easy handling. Satin chrome finish on sleeve and thimble. Staggered lines and distinct figures on sleeve. Quick-reading figures on thimble with every thousandth numbered; convenient decimal equivalents, too. Micro-lapped finish on anvil and spindle faces. All threads are ground from the solid and stabilized. Individual micrometers do not include standards. All micrometers are furnished without a case.

0-1" OUTSIDE MICROMETER

Series 230 • Model T230XRLRatchet stop and lock nut. .0001" Graduation. Full finish tapered frame permits use in narrow slots and tight places. Satin chrome finish, no glare, resists rust. Micro-lapped finish on anvil and spindle faces. One piece extra rigid spindle. Hardened threads ground from the solid and stabilized. Rigid one piece frame, drop forged steel. Easy-to-read, well balanced thimble diameter with distinct figures, every thousandth numbered. Tungsten carbide measuring faces. Convenient decimal equivalents. Easy adjustment. Case must be purchased separately.Order No. 1240-0065 .....................................................$142.00

OUTSIDE MICROMETERSSeries 436 Carbide Faces No Ratchet Stop or Lock NutPrecision performance combined with strength, rigidity, and lightness. Forged frames, ribbed for extra strength; have black enamel finish and are tapered for use in narrow slots and tight places. Quick reading figures on thimble with every thousandth numbered. Micro-lapped finish on anvil and spindle faces. One inch micrometers have convenient decimal equivalents on the thimble. Starrett Order Price Model Range Graduation Number Each •436XP-1 0-1" .001" 1240-2260 $110.00 436P-2 1-2" .001" 1240-2265 121.00 *436P-3 2-3" .001" 1240-2270 152.00 •T436XP-1 0-1" .0001" 1240-2275 113.00* Does not have carbide faces. • Furnished with case.

Starrett Order Price Model Range Number Each T436XFL-1 0-1" 1240-1665 $104.00 T436XFL-2 1-2" 1240-1670 123.00 T436XFL-3 2-3" 1240-1675 153.00 T436XFL-4 3-4" 1240-1680 167.00 T436XFL-5 4-5" 1240-1685 181.00 T436XFL-6 5-6" 1240-1690 197.00 ST436AXFLSZ 0-3" Set 1240-1695 440.00

OUTSIDEMICROMETERSInterchangeable Anvils.001" Graduationswith StandardsBalanced design. Ribbed steel, perforated frame. Frames up to 6" finished in smooth black enamel; larger sizes have wrinkled finish. Satin chrome finish on sleeve and thimble. No glare, resists rust. Micro-lapped finish on spindle face, anvil faces lapped. One-piece extra-rigid spindle. Easy to read, large thimble diameter with distinct figures, every thousandth numbered. Easy adjustment. Ratchet stop and lock nut.

Starrett Order Price Model Range Number Each 224AARLZ 0-4" 1240-2300 $320.00 224ARLZ 2-6" 1240-2305 401.00 224BRLZ 6-9" 1240-2310 532.00 224GRLZ 6-12" 1240-2315 792.00 224CRLZ 9-12" 1240-2320 602.00 224DRLZ 12-16" 1240-2325 747.00 224ERLZ 16-20" 1240-2330 927.00 224JRLZ 20-24" 1240-2335 1,092.00

DIGITAL MICROMETERSSeries 216 with Lock NutThousandths of an inch read directly from a counter. Ten-thousandths of an inch taken from a vernier scale on sleeve. Lock nut secures spindle at any reading. Micro-lapped anvil and spindle faces. Hardened threads ground from the solid and stabilized. One-piece, drop forged steel frame. 1" Mics have no-glare black finish frame with satin chrome finish on thimble and sleeve, while the 2" mics have black enamel frames. Larger sizes available. Cases sold separately.

Ratchet Stop, Steel Faces… Cases Starrett Order Price Order Price Range Grad. Model Number Each Number Each 0-1" .001" 216RL-1 1240-1605 $178.00 1240-1645 $8.95 1-2" .001" 216RL-2 1240-1610 217.00 1240-1650 13.50 2-3" .001" 216RL-3 1240-1615 245.00 1240-1655 23.00 3-4" .001" 216RL-4 1240-1620 276.00 1240-1660 23.00 Friction Thimble, Carbide Faces… 0-1" .0001" T216XFL-1 1240-1625 $183.00 1240-1645 $8.95 1-2" .0001" T216XFL-2 1240-1630 226.00 1240-1650 13.50 2-3" .0001" T216XFL-3 1240-1635 252.00 1240-1655 23.00 3-4" .0001" T216XFL-4 1240-1640 285.00 1240-1660 23.00

FRICTION THIMBLE & LOCK NUT MICROMETER


PRECISION EQUIPMENT

E163

Micrometers

MTI Order Price Model Range Number Each 103-113 0-1" 1250-0240 $66.65 103-114 1-2" 1250-0245 73.60

0-1" OUTSIDE MICROMETER

MTI Model 101-117Friction thimble type. .0001" Graduation. Carbide face anvil & spindle. Deep U-throat design for greater work clearance. Satin-chrome finish throughout.

Order No. 1250-0008 ..................$115.00

OUTSIDE MICROMETERS

Series 103Carbide faced anvil & spindle. Ratchet stop for exact repetitive readings. Hammertone baked enamel finish frame. Complete with fitted carrying case. Mics up to 12" are supplied with standard. Positive locking clamp, lightweight sturdy frame.

MTI Order Price No. Range Grad. Number Each *103-260 0-1" .0001" 1250-0010 $103.00 103-262 1-2" .0001" 1250-0015 119.00 103-217 2-3" .0001" 1250-0020 134.00 103-218 3-4" .0001" 1250-0025 153.00 103-219 4-5" .0001" 1250-0030 167.00 103-220 5-6" .0001" 1250-0035 184.00 103-221 6-7" .0001" 1250-0040 209.00 103-222 7-8" .0001" 1250-0045 220.00 103-223 8-9" .0001" 1250-0050 244.00 103-224 9-10" .0001" 1250-0055 253.00 103-225 10-11" .0001" 1250-0060 266.00 103-226 11-12" .0001" 1250-0065 276.00*No standard for 0-1"

OUTSIDE MICS

COME COMPLETE WITH SETTING STANDARD. SIZES UP TO 40" AVAILABLE UPON REQUEST!

OUTSIDE MICROMETERS

.0001" Graduations. Carbide faces. Clear graduations on satin-chrome finish. Comes with fitted carrying case.

OUTSIDEMICROMETERSSeries 104 Interchangeable Anvils, Standards & Fitted CaseCarbide faced spindle. Ratchet stop. Hammertone-green baked-enamel finish on frame. Every thousandth is numbered. Each anvil can be quickly interchanged and locked in position. Anvil is fitted with adjusting collar. Order Price Range MTI No. Grad. Steps Number Each 0-6" 104-137 .001" 6 1256-0005 $335.00 6-12" 104-138 .001" 6 1256-0010 605.00 12-18" 104-201 .001" 6 1256-0015 839.00 18-24" 104-202 .001" 6 1256-0020 969.00 24-30" 104-203 .001" 6 1256-0025 1,160.00 30-36" 104-204 .001" 6 1256-0030 1,270.00 36-42" 104-205 .001" 6 1256-0035 1,400.00

3 Pc. Set in Box MTI Model 193-9230-1", 1-2", 2-3" Order No. 1254-0060 .................. $564.00

Series 193Direct Digital

ReadoutFriction thimble stop for uniform contact pressure on 1" & 2" micrometers. Ratchet stop for 3" thru 6" mics. Carbide faced anvil & spindle. Hammertone baked enamel finish frame. .0001" Graduation. With standards.

DIGITOUTSIDE

MICROMETERS

The World's Lightest Digital Micrometer

MDC-LITE SERIES 293Inch/Metric Key. The world's lightest digital micrometer .47 lbs. (215g) in weight. Made slim for easy access to the stepped feature like the line drawing shown. Easily measures 0 through 1"/25.4 mm with resolution to .00005"/0.001mm. Measuring faces carbide tipped. Includes a zero-set key for easy orgin setting. A ratchet stop or friction thimble for a constant measuring force. Measurement readout with large characters on the LCD screen. Battery life (approximately 1.2 years). Battery: SR44 (1pc.) (Part no. 541980).

Model 293-831 Order No. 1259-2120 ....................$116.00Model 293-832 Order No. 1259-2125 ....................$119.00

Model 293-831 Ratchet Stop

Model 293-832 Friction

Thimble

DIGIMATICMICROMETERS1-Year Factory WarrantyLCD display. Featuring output for data recording and SPC analysis, from X/R charts to histograms and more. Reads to 50 millionths of an inch. ±.00005" Accuracy. Carbide tipped measuring faces. Preset capability. Instant in/mm conversion. Measurement hold key. Zero-Set key. Comes with .357 battery, key spanner, carrying case, manual. Range MTI Thimble SPC Order Price Inch/mm Model Style Output Number Each 0-1"/0-25 293-340 Ratchet No 1259-0701 $153.00 0-1"/0-25 293-330 Ratchet Yes 1259-0711 207.00 0-1"/0-25 293-348 Friction No 1259-0705 153.00 0-1"/0-25 293-335 Friction Yes 1259-0715 207.00 1-2"/25-50 293-331 Ratchet Yes 1259-0712 244.00 2-3"/50-75 293-332 Ratchet Yes 1259-0713 301.00

IP 65

MTI Order Price Range Model Number Each 0-1" 193-211 1254-0030 $161.00 1-2" 193-212 1254-0035 190.00 2-3" 193-213 1254-0040 212.00

NEW!COOLANT PROOF QUANTUMIKE Features: Faster measurement with 2mm per revolution instead of the standard 0.5mm. A patanted ratchet thimble mechanism helps ensure repeatabilty. A function lock helps prevent error. IP-65 protection level. Certificate of inspection is provided. MTI Order Price Range Model Resolution Number Each 0-1"/0-25mm 293-185 .00005/0.001mm 1259-0730 $196.001-2"/25-50mm 293-186 .00005/0.001mm 1259-0735 $224.00


PRECISION EQUIPMENT

E164

DIGITAL MICROMETERModel 599-100Ergonomic design. Resolution .00005". Large, easy to read 1/4" digital display. Tungsten carbide faces, convertable friction/feel thimble, spindle lock. Battery life of 1-2 years normal use. Meets or exceeds Federal and DIN standards. Complete in fitted shop-hardened case. Range 0-1.2"/0-30mm

Order No. 1330-1720 .............................................. $246.00

DIGITAL MICROMETERSA sleek, ergonomic design and plenty of impressive features, including the new Capa µ System®, give the Micromaster Digital Micrometer a comfortable advantage in both form and function. large, easy-to-read 1/4" digital display. Preset absolute and differentail modes. Battery life - 1 to 2 years normal usage. Automatic shut-off after 10 minutes. Meets or exceeds applicable Federal and DIN standards. Shop-hardened, fitted case.

B&S Water RS-232 Order PriceNo. Range Accuracy Resistant Output Number Each599-126 1-2"/25-50mm .0002" Y N 1330-2005 $315.00599-127 2-3"/50-75mm .0002" Y N 1330-2010 326.00599-128 3-4"/75-100mm .0002" Y N 1330-2015 341.00

UNI-MIKE.0001" Grad., Flat & Round Anvils

Measures hard-to-reach locations; from a hole or slot to an edge. Carbide tipped spindle face. Positive locking clamp. Friction thimble for exact and repetitive reading. Complete with fitted carrying case. Accuracy: Flatness; measuring face of spindle .000024", bottom of base .00008". Parallelism .00012".

Model 117-107 0-1" Order No. 1237-0005 .............$180.00Model 117-108 *1-2" Order No. 1237-0010 ............$211.00*with Standard

Resolution to 50 millionths of an inch. All mics (except Model 734XFL-1) transmit data to the complete Starrett SPC Plus family of hardware and software in addition to IBM compatible PC's for SPC output. LCD readout. Minus sign display for below zero readings. No-glare black wrinkle finish on frame. One year working battery life. Automatic shut-down after two hours of idle time. High/Low limit settings. "Error" displays and flashes “Out-of-tolerance.” Zero setting at any spindle location. "Hold" function for readout retention. Inch/millimeter conversion. "Limits" mode. Satin chrome finish on friction thimble and sleeve. One piece spindle. Knurled, ring-type thumb lock-nut. Precision tungsten carbide measuring faces. 2"-12" Models come with a protective case.

Starrett Range Range Order Price Model Inches Millimeters Number Each *734XFL-1 0-1 0-25 1240-0705 $213.00 733XFL-1 0-1 0-25 1240-0710 274.00 733XFLZ-2 1-2 25-50 1240-0720 324.00 733XFLZ-3 2-3 50-75 1240-0725 396.00 733XFLZ-4 3-4 75-100 1240-0730 428.00 733XFLZ-5 4-5 100-125 1240-0735 493.00 733XFLZ-6 5-6 125-150 1240-0740 511.00 733XFLZ-7 6-7 150-175 1240-0745 539.00 733XFLZ-8 7-8 175-200 1240-0750 568.00 733XFLZ-9 8-9 200-225 1240-0755 601.00 733XFLZ-10 9-10 225-250 1240-0760 639.00 733XFLZ-11 10-11 250-275 1240-0765 707.00 733XFLZ-12 11-12 275-300 1240-0770 762.00 73322-1 Case for 0-1" Micrometers… 1240-0715 14.00*No SPC Output

ELECTRONIC DIGITAL

MICROMETERModel No. 788XFL

Carbide anvil & spindle, SPC PLUS™ with output. Resolution: .00005" (.001mm). Fully rounded anvil. Accuracy of ± .0001 (±.002mm). Output capability to Starrett SPC Plus hardware and software and to IBM compatible PCs. LCD readout. Auto shutdown after two hours of idle time. One year working battery life. Error and flashing out-of-tolerance displays. Zero setting at any location. Instant inch/mm conversion. High-low limit settings. Limits mode. Non-glare satin chrome finish on friction thimble and sleeve. Ring-type locknut. Rigid frame and balanced feel. Range 0-1"/0-25mm

Order No. 1240-2115 ...........................................$423.00

Specifications:Resolution ............00005" (.001 mm)Accuracy ........ +/-.0001" (+.002 mm)Power ..........(2) 1.5V Rayovac #357

batteries or equivalent

DIGITAL ELECTRONIC MICROMETERSwith SPC Plus!

Micrometers

Interchangeable anvils permit quick, accurate measurement of tubing, cylindrical walls, from a hole or slot to an edge and in many hard-to-reach locations. Two anvils furnished, round anvil approx. .120" diameter and flat anvil approx. .125" and .060" thick. V-anvil for measuring thickness of screw heads, shoulder length available separately. Anvils rigidly held in vise type frame and quickly interchanged by single lock screw. Accommodates special anvils up to 5/16" thick. Can be used as height gage by removing vise jaw.

0-1" Range Order No. 1240-1700 ...................... $199.00Case (extra) Order No. 1240-1705 ........................ $10.50

MUL-T-ANVILMICROMETERModel 220XRL-1

Graduation .001", with Carbide Spindle, Friction Thimble & Lock Nut

Starrett No. Description Order No. Price795XFL-1 0-1" Ip67 Elec. Mic w/Friction Thimble, 1240-3200 $279.00 Spindle Lock, Carbide Faces, in plastic case. With output.796XFL-1 0-1" IP67 Elec. Mic w/Friction Thimble, 1240-3205 224.00 Spindle Lock, Carbide Faces, in plastic case. Without output.

ELECTRONIC MICROMETERSLarge, easy-to-read (.275"/7mm), high-contrast LCD digital readout. IP67 level of protection against coolant, water, dust and dirt. Extremely hard, stable and smooth operating one-piece friction thimble. Two 3-volt batteries included for more than one year of normal usage. Micro-lapped carbide measuring faces. Automatic OFF after 20 minutes of nonuse. Instant inch/millimeter conversion. Measurement HOLD button. Ability to zero tool at any position as well as retain and return to the true zero reading of the micrometer. Resolution: .00005" (0.001mm). Accuracies: Inch +/-.0001"Metric: +/-.002mm


PRECISION EQUIPMENT

E165

SPECIALTYMICROMETERS Range MTI Order Price Description Inch Model Number Each Carbide Tipped V Anvil .093"-1" 114-202 1259-1220 $446.00 Rotating Spindle Disc 0-1" 123-125 1259-1225 211.00 Rotating Spindle Disc 1-2" 123-126 1259-1230 233.00

114-202

123-125

BLADE MICROMETERSSeries 122 • Non-Rotating Spindle

Measure narrow grooves, keyways and other hard-to-reach areas. .0001" Graduations. Decimal equivalents marked on frame (122-125). Hammertone-green frame finish on 2", 3" and 4" models. Zero adjustment on sleeve.

MTI Order Reg. Price Range Model Number Price Each 0-1" 122-125 1246-0005 $221.00 $261.00 1-2" 122-126 1246-0010 232.00 273.00 2-3" 122-127 1246-0015 245.50 287.00 3-4" 122-128 1246-0020 260.00 306.00

.236"

.250".030"

.315"R

.236

"

122-125

DISC BRAKE MICROMETERMeasure the depth of grooves in the disc of brake systems. Hardened anvil with a 60° point. Flat spindle with carbide face. 3-1/2" Deep throat for additional reach. .001" Graduations, with standard, adjustment wrench & plastic case.

.3-1.3" Order No. 1251-0080

$32.50

DIGITAL ELECTRONICTUBE MICROMETER

Model 769AXFL with SPC PLUSTM

Measures wall thickness of tubing and other parts with cylindrical walls, & from a hole (min. size 3/16") to an edge. Resolution is .00005". Anvil diameter is 3/16". Accuracy of ±.0001" (±.002mm). Output capability to Starrett SPC Plus hardware and software and to IBM compatible PCs. High contrast LCD readout with large numbers. Auto shutdown after two hours of idle time. One year working battery life. Error and flashing out-of-tolerance displays. Zero setting at any spindle location. Limits mode. Non-glare satin chrome finish on thimble and sleeve. Friction thimble. Ring-type locknut. Rigid frame.0-1" (0-25mm) Order No. 1240-1595 ............................. $436.00Case (extra) Order No. 1240-0715 ............................... $12.00

SCREW THREAD COMPARATORMICROMETER/CALIPER

Model 210AP Without Ratchet Stop or Lock Nut

DIGITAL SHEET METAL MICROMETER

Model 764AXFL-1SPC Plus™ with OutputResolution: .00005"/.001mm. Throat depth 6". Reach over the edge of sheet metal or other materials and take convenient measurements away from the edge and toward the center. Accuracy of ±.0001"/±.002mm. Output compability to Starrett SPC Plus hardware and software and to IBM capatible PCs. High-contrast LCD readout with large numbers. Auto shutdown after two hours of idle time. One year working battery life. Error and flashing out-of-tolerance displays. Zero setting at any location. Instant inch/mm conversion. High-low limit settings. Limits mode for entering product specifications. Non-glare satin chrome finish on thimble and sleeve. Friction thimble. Ring-type locknut. Rigid frame construction and balanced feel.0-1"/0-25mm Order No. 1240-2120

$378.00

Smooth black, range 0-7/8", graduation .001". Enameled tapered frame. Conical anvil and spindle. Quick comparison of threads and measuring small grooves. Satin chrome finish on sleeve and thimble. One-piece extra rigid spindle. Hardened threads. One-piece, drop forged, ribbed steel frame. Every thousandth numbered, decimal equivalents.Range 0-7/8" Order No. 1240-2285 ........................... $135.00

DEEP THROATDISC BRAKE

INDICATING GAGESMeasure the depth of grooves worn into the disc of brake systems. 3-3/8" Throat depth. 3" Black wrinkle finish frame. 2" Long indicator stem is adjustable with thumb screw lock. .001" Indicator reverse loaded. Flat indicator contact. Anvil has a 60° point. Each gage comes with a 2D checking disc for setting the indicator at zero.

DISC TYPE MICROMETERSSeries 256 Graduation .001"With Ratchet Stop & Lock NutThin, tapered anvil and spindle discs, 1/2" diameter, 1/16" at the center tapering to .015" edge thickness. Enters narrow grooves, slots and

Starrett Order Price Model Description Number Each 1016 .300-2" Disc Brake Dial Gage with 1240-2130 $471.00 2D–1" checking disc 1016M 8mm-50mm Metric Disc Brake 1240-2135 $566.00 Dial Gage 2MD–25mm checking disc

recesses, making possible the measurement of sections such as ribs, lands, fins; cutting edges on form tools; and chordal thickness of gear teeth. 0-1" mics have no-glare satin chrome finish all over. Larger sizes have satin chrome finish on reading surfaces and smooth black enamel finish on frames.0-1" Model 256RL-1 Order No. 1240-1710 ....................$237.001-2" Model 256RL-2 Order No. 1240-1715 ....................$254.002-3" Model 256RL-3 Order No. 1240-1720 ....................$269.00

Micrometers


PRECISION EQUIPMENT

E166

MICROMETER ATTACHMENTSEach anvil attachment is held on with it's own reinforced neoprene boot. Fits any 1-1/2" micrometer English or Metric. Measures odd workpieces and hard to reach places; shoulders, webs, angles, slots, grooves. Packed in protective case. Ball attachment 0.200 diameter. Chrome alloy steel. All other attachments are 0.5 long. Hardened & ground, alloy steel.

Individual Order Price Anvil Type Specifications: Number Each Ball 0.200" for mics to 12" 1244-0005 $2.75 Spline 0.100" x .500 OAL 1244-0015 2.75 Knife 0.020" Face x 30° 1244-0020 2.75 Super Spline 0.050" Face x .500 OAL 1244-0025 2.75 Blade 0.030" Face x .500 OAL 1244-0030 2.75 Comparator 0.040" Face x 30° 1244-0035 2.75 Disc Anvil 0.500" Face x .500 OAL 1244-0040 2.75 7 Pc. Set Includes all the above… 1244-0010 8.75

THREAD MEASURING TRIANGLES1 Pair of thread measuring triangles measures all 60° threads from 4 to 80 pitch, standard and special, outside diameter. Includes chart. Hardened & precision ground.

Order No. 1289-0205 ...........................................$26.70

UNIVERSAL MIC STANDHeavy micrometer stand made of cast iron. Adjustable to any position. Hammertone baked enamel base. Desirable measuring position & angle for inside/outside mics and many other instruments.

Order No. 1276-0045 ....... $12.95Reg. $19.95

FITTED MIC CASESCases for 0-1" and 1-2" micrometers are deluxe fitted plastic, with rigid, substantial construction. Cases for larger tools are heavy duty wood or high density rigid foam construction. USA Made.

Mic. Order Price Size Number Each 0-1 1240-0190 $7.40 1-2 1240-0195 13.00 2-3 1240-0200 27.50 3-4 1240-0205 24.50 4-5 1240-0210 28.00 5-6 1240-0215 31.50 6-7 1240-0216 63.00 7-8 1240-0217 73.00 8-9 1240-0218 79.00 9-10 1240-0219 78.00 10-11 1240-0221 77.00 11-12 1240-0222 77.00

LEATHER HOLSTERFor 1" Micrometers

Order No. 1240-2165

$18.00

MICROMETER STANDModel 156-101For .5" thru 4" micrometers. Designed to allow bench-top use with hand micrometers or other gages which have frame area sufficeint to grab onto. Dimensions: 6.5" L (at base) x 4.57"H, Jaw: .71"W x 1.18"H. Space from base to jaw: 3.15".

Order No. 1250-0250 ...... $95.30

Micrometers

Range .2-1.2" Order No. 1257-0005 ..................... $29.00Range 1-2" Order No. 1257-0010 ..................... $34.00

INSIDE MICROMETERS.001" Graduation

Satin chrome finish on barrel and thimble. Measuring faces are fully hardened, precision ground and microlap finished. Spindle threads are hardened and ground. Microfine graduations. Accuracy to .0002". Ratchet stop thimble assures exact and repetitive readings. Easy zero adjustment on the sleeve.

DEPTH MICROMETERS

With Interchangeable RodsGraduations .001". Satin chrome finish. Ratchet stop thimble for consistent, repetitive measurements. Complete with fitted box.

Base No. Order Reg. Sale Range Length of Rods Number Price Price 0-4" 2.5" 4 1238-0005 $64.50 $39.00 0-4" 4" 4 1238-0010 69.00 49.00 0-6" 2.5" 6 1238-0015 79.00 54.00 0-6" 4" 6 1238-0020 84.00 59.00

22 PC. INDICATOR POINTS KITMade of the highest quality steel, carefully knurled and manufactured to applicable specifications. Each point is manufactured with 4-48 threads for use with AGD 1-2-3-4 and ANSI spec. indicators.

Order No. 1272-0055

$10.95Reg. $12.95


PRECISION EQUIPMENT

E167

INSIDE MICROMETERSSeries 124 Graduation .001"Satin chrome finish on heads, no glare, resists rust. Each rod marked with length. Hardened and ground anvils on rods, adjustable for length. Head anvil hardened and ground. One piece screw with hardened threads ground from the solid and stabilized. Quick reading figures, every thousandth numbered. Quick, easy adjustment for micrometer screw. Convenient handle available on No.'s 124AZ, BZ and DZ. Provides reach for use in deep holes. Complete with fitted case. No. of Starrett Movmnt. Meas. Number Order Price Number Range of Screw Rods of Gages Number Each 124AZ 2 to 8" 1/2 6 (1) 1/2" Gage 1240-0280 $207.00 124BZ 2 to 12" 1/2 10 (1) 1/2" Gage 1240-0285 251.00 124CZ 8 to 32" 1" 4 (1) 1" & 1240-0290 457.00 (2) 2" Gage 124DZ 2 to 32" 1/2 & 1" Incl. Set Nos. 1240-0295 649.00 (2 heads) 124AZ & 124CZ

TUBULAR INSIDE MICROMETERSSeries 823 Graduation .001"Satin chrome finish on head, no glare, resists rust. Tubular measuring rods. Lightweight plus extreme rigidity. Rods attachable to either or both ends of head for ease of reading. Each rod marked with length. Hardened and ground anvils on rods, adjustable for length. Head anvil hardened and ground. One piece screw with hardened threads ground from the solid and stabilized. Quick reading figures, every thousandth numbered. Lock nut furnished on 1" heads. Convenient handle furnished on AZ, BZ, FZ micrometers. Interchangeable anvils on both 1/2 and 1" heads. Complete with fitted case. Starrett Movement Order Price Number Range of Screw Description Number Each 823AZ 1-1/2–8" 1/2 5 measuring rods 1240-0300 $248.00 and handle 823BZ 1-1/2–12" 1/2 8 measuring rods 1240-0305 303.00 and handle 823CZ 4–24" 1"* 7 measuring rods 1240-0310 383.00 823DZ 4–32" 1"* 8 measuring rods 1240-0315 424.00 823EZ 4–40" 1"* 10 measuring rods 1240-0320 469.00 823FZ 1-1/2–32" 1/2 & 1"* 10 measuring rods 1240-0325 581.00 (2 heads) and handle*NOTE: 1" heads furnished with lock nut.

MICROMETER DEPTH GAGESSeries 440 & 445 with 2-1/2, 4 & 6" Bases Graduation .001"The depth of holes, slots, shoulders and projections can be measured to .001". Both sleeve and thimble have no-glare satin chrome finish. Graduations are quick-reading with every thousandth numbered. The screw is precision ground and has a 1" movement. Lock nut holds the setting at the precise measurement desired. The bases are hardened, ground and lapped. Measuring rods have individual length adjustment and are hardened, ground and lapped on the end measuring faces. They are inserted through a hole in the screw and brought to a positive seat by a knurled nut. All gages are furnished in attractive, protective cases with ratchet stop and lock nut in case. Starrett Base Number Rod Order Price Number Range Length of Rods Dia. Number Each 440Z-3RL 0 to 3" 3 1240-0350 $201.00 440Z-6RL 0 to 6" 2-1/2 6 1/8 1240-0355 240.00 440Z-9RL 0 to 9" 9 1240-0360 301.00 445BZ-3RL 0 to 3" 3 1240-0365 216.00 445BZ-6RL 0 to 6" 4" 6 5/32 1240-0370 255.00 445BZ-9RL 0 to 9" 9 1240-0375 317.00 445DZ-3RL 0 to 3" 3 1240-0380 251.00 445DZ-6RL 0 to 6" 6" 6 5/32 1240-0385 289.00 445DZ-9RL 0 to 9" 9 1240-0390 346.00

445BZ-6RL

440Z-3RL

MICROMETER DEPTH GAGES WITH NON-ROTATING BLADESSeries 449 Graduation .001"Non-rotating, blade-type rods approximately .045" thick x 1/8 wide. By holding the base in one hand, the blade can be turned and positioned at any angle relative to the base. The blade does not turn, but moves perpendicularly only, permitting depth measurement of narrow shoulders without the blade rolling off. Great, too, for slots and recesses as narrow as .045". Furnished with 2-1/2 or 4" base and 3 or 6 rods for measuring 0 to 3" or 0 to 6" in thousandths of an inch. The micrometer screw is precision ground and has a 1" movement. Bases and rods are hardened, ground and lapped. Rods have individual length adjustment. Added features include no-glare satin chrome finish and quick-reading graduations. With ratchet stop, no lock nut. Complete with fitted case. Starrett Base No. of Order Price Number Range Length Rods Number Each 449AZ-3R 0 to 3" 2-1/2 3 1240-0330 $234.00 449AZ-6R 0 to 6" 2-1/2 6 1240-0335 285.00 449BZ-6R 0 to 6" 4" 6 1240-0345 300.00

LONGER RANGE MICROMETER HEAD0-2" Range • .001" GraduationSatin chrome finish, no glare, resists rust. Micro-lapped finish on spindle face. One-piece extra rigid spindle. Hardened threads. Easy to read, well balanced thimble diameter with distinct figures. Staggered lines assures precise, easy readability. Quick reading figures, every thousandth numbered. Quick easy adjustment. Starrett Order Price Model Description Number Each 63P w/o Ratchet Stop, & Lock Nut 1240-2290 $172.00 63RL w/ Ratchet Stop & Lock Nut 1240-2295 179.00

Micrometers


PRECISION EQUIPMENT

E168

DEPTH MICROMETERSSeries 129 Interchangeable RodRatchet stop. .157 Dia. interchangeable rods, with lapped measuring end. Satin chrome finish throughout. Complete with fitted carrying case. Flatness of reference face (bottom face of base): .0001"/2.3µm. Instrument accuracy: + ,00015". Zero point error of rod: ± (.00008" + .00004 x L3*). L= Maximum measuring length. * Truncated after decimal point. MTI No. of Order Price Range Base Number Rods Number Each 0-4" 2.5" 129-127 4 1258-0005 $162.00 0-6" 2.5" 129-128 6 1258-0010 196.00 0-12" 2.5" 129-149 12 1258-0015 345.00 0-4" 4" 129-131 4 1258-0020 179.00 0-6" 4" 129-132 6 1258-0025 210.00 0-12" 4" 129-150 12 1258-0030 361.00

0-6" DIGIMATIC DEPTH MICROMETER With 4" BaseModel 329-350.00005”/0.001mm ResolutionSPC OutputInch/mm, Preset, Zero/ABSRatchet Stop

Order No. 1259-1245 ........................................$512.00Use SPC Connecting Cable: 937387 (1M) 965013 (2M)

DIGITAL, ELECTRONIC

MICROMETER DEPTH GAGEModel 749BZ-6RL • 0"-6" (0-150mm)

Satin chrome finish on thimble and sleeve. Data transmission to Starrett SPC Plus, and to IBM-compatible PCs. LCD readout with .190" numbers. Automatic shutdown after two hours of idle time. High/low limit settings. Error and flashing out-of-tolerance displays. Zero-setting. "Hold" function. Reads inches or millimeters.

Order No. 1240-1600 .........................................$537.00

DIGITAL MICROMETER DEPTH GAGEModel 446AZ-6RL 0-6" Range, .001" Graduation

Satin chrome finish. Reads directly from the counter. The digital readout displays white numbers on a black background. Number of rods: 6.

Order No. 1240-2245 ........................................ $368.00

No. Base Order Price B&S No. Range of Rods Lgth. Number Each 599-603-123-3 0-3" 3 2.5" 1330-1165 $179.00 599-603-143-3 0-3" 3 4" 1330-1170 195.00 599-603-126-3 0-6" 6 2.5" 1330-1175 209.00 599-603-146-3 0-6" 6 4" 1330-1180 234.00 599-603-128-3 0-12" 12 2.5" 1330-1185 299.95 599-603-148-3 0-12" 12 4" 1330-1190 309.00

DEPTH MICROMETERS.001" Graduations

Satin-chrome finish. 1/8" Measuring rods. Hardened, precision base, friction thimble. Ring lock. Inch reading. Mahogany case.

DEPTH MICROMETERS

Order Price B&S No. Range Accuracy Water RS-232 Number Each 60.30069 0-3.5" 3 Y Y 1330-2020 $960.00 60.30070 0-7" 3 Y Y 1330-2025 1,119.00

3-Key functions w/RS-232 data output. Non-rotating spindle. hardened steel measuring foot faces: 100 x 15mm. Hardened steel measuring rods 3mm diameter. Measuring span 0-90 w/3 rods, 0-180mm w/6 rods.

Depth Mics & Gages

DEPTH GAGE Model J158/1BFor convenient and rapid measurement of bore depths. .0001" graduation. 0-10" range. 100-0 dial reading. 3-1/8 base. In sleek wooden box.

Order No. 1272-0135 ............................................. $99.00

ANGLE DEPTH GAGE2-1/2" Width, hardened head, black finish, 15° increments. 6" chrome rule, 64ths & 32nds scales. Base is precision ground, with slots for both rule & groove for depth rod (included). In plastic pouch.

Order No. 1294-0005

$19.65

ANGLE DEPTH GAGEHardened head, 15° increments. 6" x 3/16 Chrome rule graduated in 64ths & 1/2mm. Plastic pouch.

Order No. 1289-0400 .............. $5.958" VERNIER DEPTH GAGE.001" Increments, chrome clad, wood box included.

Order No. 1289-0250 ............$14.95


PRECISION EQUIPMENT

E169

POCKET THICKNESS GAGE .450" Range2" Diameter adjustable dial with lock-ing device. 0-100 Dial reading. .001 Graduations with revolution counter. 1" Throat depth. Measuring faces are ground for precise measurements. .235" Face diameter. Jeweled movement, shock proof. Rigid frame with handle.

Order No. 1289-0260

$35.20Reg. $49.00

QUICK MINI THICKNESS GAGES

It's the size of a busi-ness card, but with

the power and precision of Mitutoyo

inside!

Model Description Order No. Price Ea.700-118 .5" Quick Mini 1259-1400 $103.00700-122 1" Quick Mini 1259-1405 116.00

POCKET THICKNESS GAGE.5" Range1-1/2" Diameter adjustable dial with locking device. 0-100 Dial reading. .001" Graduations with revolution counter. 3/4" Throat depth. Measuring faces are ground for precise measurements. 3/8" Face diameter. Jeweled movement, shock proof. Comes with carrying case.

Order No. 1289-0265 ........ $29.00

Starrett Dial Order Price Model Graduation Reading Number Each 1010Z .001" 0-100 1240-1165 $193.00 1010EZ .0005" 0-50 1240-1170 208.00

PORTABLE DIAL HAND GAGEModel 1015BZ .001" Graduation, 0-100 Dial Reading, 1" RangeReadings are taken directly from the dial indicator which has a direct reading count hand. The dial can be adjusted relative to zero and locked with the bezel clamp screw. Has jeweled bearings.

Order No. 1240-2400

$319.00

POCKET THICKNESS GAGEMeasurements to .001". The spindle is lifted atop the gage. It is pre-loaded so that a variety of materials can be measured with a consistent spindle pressure. Diameter of the spindle and anvil faces is .236". Weighs only 3 oz. Spindle is chrome plated. Has a fraction-to-decimal equivalent table on rear panel. Measuring faces are hardened, ground and lapped for accuracy. Easy adjustment for zero-point: loosen tiny clamp screw on back of bottom frame, then adjust by turning the screw at bottom of anvil. Dimensions: 2-3/8 x 1" x 1/2" thick, .39" throat, .001" graduation.

0-.4" Model 7308 Order No. 1289-0160

$147.00

Thickness Gages

DIAL INDICATOR POCKET GAGEAbout the size of a thin pocket watch, The gage fits naturally into the curve between the thumb and index finger. Throat depth ranges from 1/2 down to 5/16; diameter of the flat contacts is 1/4. The case is a die casting, chrome plate, with an unbreakable crystal. Revolution counter. Furnished in attractive case.

INTERNAL DIAL CALIPERS Bezel rotates for zero setting. Button used for opening arms. .001” graduation.

3 PC. SET BUY ALL 3 & SAVE 10% Order No.. 1266-9950

$199.00Reg. $186.00

.375" - 1.375" Range Order No. 1266-0085 ............................................ $70.00.750" - 1.750" Range Order No. 1266-0090 ............................................ $75.001.125" - 2.125" Range Order No. 1266-0095 ............................................ $80.00

NEW! DIGITAL POCKETTHICKNESS GAGE0-½”Measuring range: 0-.545”/0-13.85mm. Resolution: .0005”/.01mm. Includes output - Can be used with positron display units. Includes SR-44 Silver oxide battery.

Order No. 1289-0240 .............................................$49.00


PRECISION EQUIPMENT

E170

PRECISION HARDNESS TESTER3-R Type • Rockwell SystemA High grade precision instrument, using the Rockwell method for testing hardness in metals. Test Height: 6-3/4. Throat Depth: 5-5/16. Dimensions: 18-3/8 L x 9-3/8 W x 24-13/16 H. Accessories: Hardness standards (one each) for Rockwell “C” and “B” scales and “A” scales. Diamond penetrator. Flat anvil. “V” anvil. Large flat anvil. Rockwell standard block set. Weight approximately 150 lbs. NOTE: Consists of high, medium & low “C” scale. A & B masters. No need to change weight loads. Can be easily adjusted by a calibrated knob. 205 lbs.

Order No. 2001-0130 ...............$799.00Reg. $819.00

Loads & IndentersTotal Load inkgf. (initial 60 100 150load 10 kgf.)lndenter Diamond 120° Ball 1/16" Diamond 120°Test Scales Rockwell A Rockwell B Rockwell C Test on case Annealed Annealed hardened steel ferrous & hardened &Suitable for non-ferrous tempered or metals deep case hardened steel

PORTABLE SURFACE ROUGHNESS TESTERModel 178-923-2ASurftest SJ-201P Features• Portable for easy measurement anywhere• The detector/drive unit can be detached from the display unit to facilitate measurement• Roughness parameters compatible with ISO, DIN, ANSI, and JIS• 19 analysis parameters are provided, including the basic Ra, Rq, Rz, and Ry• Auto-calibration for simple gain-adjustment• Data output is available for SPC operation• RS-232C interface • 2-way power system (AC adapter and rechargeable built in battery)• A hard copy of the measurement data is available with the optional printer (64AAA779)

Order No. 1259-3025

$2,100.00

Provided with 178-602

Roughness Specimen

Testers & Caliper Accessories

HARDNESS TESTING FILE SETPractical, inexpensive method to quickly determine approx. hardness of heat treated work-pieces and materials. Indispensable for every machinist and heat treater. Handy, color coded set of 6 Testing Files covers nominal hardness from 40 Rc to 65 Rc in increments of 5 Rc. Special curved design for easy access in hard to reach places.

Order No. 1233-1095

$79.00Reg. $90.90

CALIPER EXTENDER ATTACHMENTExtends the range of your 6" Caliper up to 51". Allows both inside and outside measurements of up to 51" with your 6" Dial, Vernier, or Digital Caliper. Extension bars are manufactured from high grade aluminum, and black anodized with white numerals for clarity and protection. All mounting hardware and calibration rods are included. Complete instructions accompany this easy to use kit. Choose the model that fits the range of measurements you need to take.26" Extension Kit Order No. 1266-0291 ......................... $119.0036" Extension Kit Order No. 1266-0292 .........................$161.0051" Extension Kit Order No. 1266-0293 .........................$185.00

Caliper not included

GROOVEMEASURING CALIPER JAWSA complete set of accessory jaws that fit on any 6" caliper, for measuring grooves. Many uses, including undercuts. Works with dial, vernier, and electronic tools, with measuring capacity from 0.200: to 6" in diameter. Bodies are self aligning, as they have an alignment pin built into each pair. Manufactured in the USA of cold rolled steel, black oxide finished for protection. Sets comes in fitted plastic case.

Clearance Model Min. Thickness Max. End of Tip Order Price No. Dia. of Tip Depth to Jaw Number Each Z9510 .200" .015" .400" .050" 1233-1145 $40.00 Z9511 .300" .015" .625" .070" 1233-1150 40.00 Z9512 .600" .025" 1.000" .200" 1233-1155 40.00 Z9513 .725" .040" 1.250" .255" 1233-1160 45.00 Z9514 External .024" 3.00" .375" 1233-1165 62.50 Z9500 3 Pr. Set includes .400, .625, 1" 1233-1170 99.95 Z9505 5 Pr. Set includes all above jaws 1233-1175 187.00

MTI Fits Diameter Jaw Order Price Model Calipers x Length Slot Number Each 050001 4", 6" & 8" .375 x 2.187" .141" 1262-0050 $59.00 050018 12" .500 x 2.75" .154" 1262-0055 65.00

CENTER LINE GAGESPairs of conical probes are designed for digimatic, dial and vernier calipers to quickly measure centerline distances. Centerline distance is read directly off the caliper without a conversion factor.

CENTER LINE GAGESMeasures centerline distances. 60° Conical points. Attaches to calipers in seconds with no-mar set screws; will not scratch caliper jaws. Allows user to read centerline distances directly without conversions. Hardened alloy steel with black oxide finish. Impact tubes & allen wrench.

Fits Diameter Order Price Type Calipers x Length Number Each USA Made 4", 6" & 8" .375 x 2.20" 1289-0165 $17.50 WT Import 4", 6" & 8" .375 x 2.20" 1266-0255 5.95 WT Import 12" .500 x 2.747 1266-0260 7.95

CALIPER POINT KITFits 4" , 6", & 8" calipers. Points screw into the bottom or any side of the holder. Comes with a pair of holders, 2" long and 3/8" square and 4 pairs of 3/4" long points. 60° pointed 1.80" diameter, Ball end 1.80" diameter, flat 1.80" diameter & flat .76 diameter. Supplied with plastic tube, allen wrench, and instructions.

Order No. 1272-0150 .................. $11.45Reg. $16.50


PRECISION EQUIPMENT

E171

6" VERNIER CALIPERwith Wood Box

Stainless steel. Two scales: .05mm top and .001“ bottom.Order No. 1266-0160 ........................... $10.25 ea. or $8.75 ea./3

6" VERNIER CALIPERwith Plastic Box

Stainless steel. Two scales: .001 on top and .02mm on bottom.Order No. 1266-0235 ............................ $10.25 ea. or $9.10 ea./3

6" VERNIER CALIPERWith Fine Adjustment

.001” and .02mm Graduation. Micro-fine black graduations on a satin chrome finish. All measuring faces are ground and lapped.Order No. 1266-0245 ......................................................... $11.40

Reg. $11.95

6" VERNIER CALIPERwith Thumb Roller & Wood Box

Stainless steel. Two scales: .001“ top and .02mm bottom.Order No. 1266-0165 ......................... $14.90 ea. or $13.20 ea./3

Buy 3 of one size and save! Order Reg. Price Price Range Number Price Each Ea./3 8" 1266-0100 $27.95 $17.80 $16.00 12" 1266-0150 35.95 25.85 23.25

8" & 12" VERNIER CALIPERSwith Fine Adjustment

.001" and .02 mm GraduationMicro-fine black graduations on a satin chrome finish. Raised sliding surfaces prevent defacement and wear of graduations. All measuring faces are ground and lapped. Measures inside & outside, (12" has step measurement). Satin chrome finish. Clear black engravings.

Vernier Calipers

6" PLASTIC INCH/METRIC CALIPER2 Vernier readings: 1/128" on top and 0.1 mm on bottom. Thumb pad for easy adjustment. Inside, outside and depth measurement. Easy to read black graduations on gray finish. High impact resistant plastic.Order No. 1266-0071 ...........................................................$1.15

MASTER VERNIER CALIPERSSatin Chrome Series 123 • .001 Graduations

Long 50-division vernier scales with widely spaced graduations. Half as many bar graduations as conventional single or double vernier tools. Flush fitting of the vernier scales to the main scale, both in the same plane, eliminates reading errors and insures exact alignment. The open-face design has two vernier scales on one side of the gage for inside and outside measurements. Complete with case. Starrett Order Price Model Range Number Each 123Z-12 12" 1240-1080 $586.00 123Z-24 24" 1240-1085 797.00 123Z-36 36" 1240-1090 1,768.00 123Z-48 48" 1240-1095 2,512.00

LONG JAW CALIPERSwith Fitted Case

Vernier scales: 1/1000 & 1/50mm, chrome finish. Both vernier scales are located on one side of the gage for inside and outside measurements. No need to turn the tool over. Made of hardened stainless steel throughout, ground and lapped for accuracy. Direct reading on inside measurement. Long 50-division vernier scales have wide-spaced graduations on satin chrome finish. Longer jaws permit greater accessibility and simpler measurement of larger work pieces. Micro adjustment screw.

* To calculate inside diameter: Deduct width of jaws from vernier reading.

• 2-1/4" jaw length .02mm x .001

Jaw Jaw Order Reg. Price Size Depth Width Number Price Each 12" 2.4 – – 1266-0006 37.50 27.50 18" 3.15 – – 1266-0018 59.00 49.00 *24" 3.1 .3937" (10mm) 1266-0007 99.00 59.00 *40" 5.4 .7874" (20mm) 1266-0008 299.00 199.00 60" 7 – – 1266-0009 459.00 397.00

4" BRASS CALIPERTop scale graduated in 16ths of a inch. Bottom scale in millimeters. A fixed pin located in the center of the scale allows smooth & easy adjustment.

Order No. 1266-0240 ................................................ $5.95

5" SLIDE CALIPERModel 729

Stainless steel caliper with inside and outside readings in 16ths and 32nds. Decimal equivalent table on back. 5" Capacity.Order No. 6800-0055 ........................................ $11.50

POCKET SLIDE CALIPER 6"STAINLESS STEELModel 1025-6

Rust-proof and stain-proof with a permanently bright stainless steel finish. Both inside and outside diameters can be accurately measured in 64ths of an inch. Jaws are designed with straight inside surfaces for measuring outside diameters and also have rounded nibs to measure holes. Two knurled thumb pieces on the slide make it easy to open or close the jaws. The slide can be locked for any measurement. Range: Outside 0-4-3/4, inside 1/4-5". Depth of jaws: 1-3/8". Slide graduations: 32nds & 64ths. Stock graduations: 32nds.

Order No. 1240-1115 ............................................$156.00


PRECISION EQUIPMENT

E172

DUAL DIAL CALIPERSwith Fitted Plastic CaseAdjustable non-glare dial indicates both inch and metric. .100/2.0mm revolution. Graduations .001” & .02mm. 4-way measurement: Outside, inside, depth and step. Vernier also reads in inch and metric. Hardened stainless steel surface with satin chrome finish.6" Order No. 1266-0055 ...............................................$33.2512" Order No. 1266-0059 ...............................................$56.35

DIAL CALIPERSCovered Racks

4-Way measurement: Inside, outside, depth and step. Vernier readings in inches. The 4" model has satin chrome vernier with .10" graduations. Stainless steel hardened surface, adjustable non-glare dial, satin chrome finish. Complete with fitted case or pouch. Accuracy .001" per 6". Dial Dial Dial Order Reg. Price Size Color Rev. Grad. Number Price Each 4" white .200 .02 • 1266-0290 $16.00 $ 11.40 6" white .100 .001 1266-0058 28.00 15.80 6" black .100 .001 1266-0205 28.00 15.80 8" white .100 .001 1266-0106 49.00 27.00 8" black .100 .001 1266-0265 49.00 27.00 12" white .100 .001 1266-0111 59.00 32.10 12" black .100 .001 1266-0175 59.00 32.10 24" white .100 .001 * 1266-0320 129.00 125.35

* 3 way measurement only, no inside measurement • close-out

DELUXE DIAL CALIPERS 6"Graduation .001", dial revolution .100". Specially designed thumb wheel for adjusting the non-glare dial. Stainless steel hardened surface. 4-Way measurement. Comes with case.Gold Dial Order No. 1266-0275 ..................................$21.75

(1266-0058 shown)

Starrett Face Order Price Range Model Color Number Each 0-6" 120A-6 White 1240-0030 $162.00 0-6" B120A-6 Black 1240-0031 162.00 0-6" R120A-6 Red 1240-0032 162.00 0-9" 120AZ-9 White 1240-1105 293.00 0-12" *120-12 White 1240-1109 299.00 0-12" 120Z-12 White 1240-1110 331.00 Case for 6" 120ZZ-6 White 1240-1100 13.50

DIAL CALIPERSSeries 120.001" Graduation, .100" range/revolution. 4-Way dial caliper has knife edge contacts for inside and outside measurements. The 6" and 9" models have a rod connected to the slide for obtaining depth dimensions. All readings are taken directly from the bar and dial indicator. Thumb roll for fine adjustment. Knurled thumb screws lock the moveable jaw and adjustable indicator dial at any setting. Made of hardened stainless steel with sharp black bar graduations on a no-glare satin background. Rack is stabilized stainless steel with teeth pointing downward to shed foreign matter. All models listed below (except Model *120-12) come with protective case.

Dial Calipers

B&S Dial Order Price Model Range Color Number Each 599-579-4* 0-6" white 1330-0095 $136.00 599-579-5* 0-6" black 1330-0100 136.00 599-579-8-1 0-8" white 1330-0102 238.00 599-579-8-5-1 0-8" black 1330-0103 238.00 599-579-12-1 0-12" white 1330-1260 283.00 599-579-12-5-1 0-12" black 1330-1262 283.00*Covered Rack

DIAL-CAL® DIAL CALIPERSDial Revolution is .100". Graduations .001". Patented shockproof design. Adjustable zero set, slide lock, 6 & 8" models feature anti-backlash. Calipers come with either white or “Jet Console” black dial.

Mahogany Case for 6" CalipersOrder No. 1330-0110

$29.00T-Bar Depth Base • 3" Wide B&S Model: 599-579-25Order No. 1330-0105 ..................................................................... $51.00

DIAL CALIPERS Series 505

Covered rack for longer, dust free operation. Inside, outside, depth & step measurements. Stainless steel, hardened throughout. Measuring faces precision ground & micro-lapped for ultimate accuracy. Scale is satin chrome finished with engraved graduations. Dial reads directly to .001" and is adjustable for setting. Clamp for repetitive settings. Accuracy

Metric Dial Calipers Series 505 - While Supplies Last~! MTI Order Price Range Model Grad. Number Each 0-300mm 505-635-50 .05mm 1262-0047 $139.00

MTI Dial Order Price Range Model Range Number Each 4" 505-716 .200* 1262-0010 $87.45 6" 505-717 .200* 1262-0015 102.00 6" 505-675 .100 1262-0025 112.00 6" 505-718 .200• 1262-0030 135.00 8" 505-719 .200* 1262-0040 151.00 8" 505-676 .100 1262-0035 163.00 12" 505-720 .200* 1262-0045 227.00 12" 505-677 .100 1262-0020 243.00* Dial range is .100" in either direction or .200" in one direction.• With carbide outside jaw.


PRECISION EQUIPMENT

E173

DIGIMATIC PLASTIC CALIPERIdeal for use in the lab, woodshop, classroom, or medical profession. .001”/0.1mm Resolution ± .008” Accuracy

0-6" Model 700-126 Order No. 1259-1250 $45.35

MYCAL-ABSOLUTEELECTRONIC CALIPER

1-Yr. Factory WarrantyMyCal-Absolute incorporates an innovative linear encoder that detects the absolute slider position on the scale–not the slider displacement. Over-speed errors are a thing of the past. 7.5mm LCD character display. Uses a single SR44 battery which will last for 3-1/2 years-plus! Measurement data can be output for SPC with an optional SPC cable with data switch and a data hold unit is also available. Should the scale surface be soiled by workshop contaminants, an error message is displayed to remind user to clean instruments before measuring. Resolution .0005"/0.01mm. Incremental error ±.001/±0.02mm. Repeatability .0005"/0.1mm. Thumb wheel on every model. MTI SPC Order Price Range Model Output Number Each 0-4"/0-100mm 500-195-20 No 1259-0800 $128.00 0-6"/0-150mm 500-196-20 No 1259-0960 141.00 0-6"/0-150mm 500-171-20 Yes 1259-0230 163.00 0-8"/0-200mm 500-197-20 No 1259-0832 199.00 0-8"/0-200mm 500-172-20 Yes 1259-0231 214.00 0-12"/0-300mm 500-193 No 1259-0842 390.00 0-12"/0-300mm 500-173 Yes 1259-0323 455.00

MYCAL LITESeries 700

Resolution: .001/0.1mm. ±.005/0.2mm accuracy. Depth bar provided. All steel construction. Large LCD digits for error free reading in either inch or mm mode. Zero point can be set anywhere to allow quick comparison measurements. Response speed: 63"/s (1.600mm/s). Silver oxide battery SR-44. 4 digit (-) sign display. Alarm for low battery & over speed. No SPC output.

0-6" Model 700-113 Order No. 1259-2100 ............................$104.000-8"" Model 700-123 Order No. 1259-1255 ............................$159.00

Digital Calipers

WT IP67 6" DIGITAL CALIPER

Fully protected against the penetration of liquids and anti-magnetic IP67 prevents dust, spraying water or oil from entering the caliper through effective encapsulation of the main parts. Auto power off. Zero setting at any position. Inch/mm conversion at any position. Four-way measurement range: 150mm/6" resolution 0.01mm/0.0005"

Order No. 1266-0375 ............................................................ $69.95

Resolution .......................................................................................0.0005"/0.01mmAccuracy ........................................................................................ 0.001"/±0.03mmRepeatability ...................................................................................0.0005"/0.01mmMax. measuring speed .................................................................60"/1.5m per sec.Working temperature .............................................................................41 to 104°F.

0-6" Digital Caliper Order No. 1266-0250 ............. $19.95 Reg. $59.00

0-12" Digital Caliper Order No. 1266-0252 .........................$59.00

DIGITAL CALIPER

Inside, Outside, Depth & StepVernier reads every 10mm from 0-150mm. Thumb roller for easy movement. LCD display. (1) Silver oxide battery SR44 (included).

COOLANT-PROOF CALIPER 6"/0-150MMModel 500-752-10

Sealed against fluids and contaminants. IP-67 rated: coolant-proof, dust-proof, chip-proof. Use it anywhere - even submerged. Includes Mitutoyo's patented absolute encoder technology, the "set 'n forget" origin set-up feature. .0005"/0.01mm resolution with ±.001"/±0.02mm accuracy. Inch/metric push button conversion. Largest digital tool LCD (.3"). Auto ON/OFF. Repeatability .0005"/0.01"mm. Uses SR44 Batteries. Electromagnetic induction type absolute encoder. Response speed: unlimited.

Order No. 1259-2095 ...............................$181.00

SUPER SCREEN DIGITAL CALIPERSStainless, hardened rack. Inside, outside, depth & step. Large LCD display. Includes SR-44 silver oxide battery. Complete with output. Can be used with positron digital display units. Size 6 Inch 12 Inch 24 InchMeasuring Range 0-6"/1-150mm 0-12"/1-300mm 0-24"/1-600mm Resolution .0005"/.01mm .0005"/.01mm .0005"/.01mm

Order No. 1266-0295 1266-0300 1266-0325

Price $29.00 $59.00 $139.00

6" FRACTIONAL SUPERSCREENELECTRONIC DIGITAL CALIPER3-way function measures in fractions, decimal, mm. Stainless, hardened rack. Inside, outside, depth, and step. Large LCD display. Includes SR-44 battery.

Order No. 1266-0350 ............................................................ $24.95


PRECISION EQUIPMENT

E174

6 PC. TELESCOPING GAGE SET5/16 thru 6"Satin chrome finished. Constant spring tension for uniform feel. Contact points hardened & ground. Uniform contact pressure. Precision ground on the end measuring radius.Order No. 1285-9980

ALONE: $12.95

GET THE ABOVE TELESCOPING GAGE SET WITH THIS 6" DIAL CALIPER FOR ONLY Order No. 1285-9982A $26.90 Value

Caliper info…Revolution .100, covered racks, 4-way measurement. Vernier readings; inch. Stainless steel hardened surface, adjustable non-glare dial, satin chrome finish. Complete with fitted case or pouch. Accuracy .001" per 6". A $16.95 Value

$22.50

Starrett Order Price Model Range Number Each 579A 5/16–1/2 1240-1120 $23.50 579B 1/2–3/4 1240-1125 25.00 579C 3/4–1-1/4 1240-1130 26.00 579D 1-1/4–2-1/8 1240-1135 27.00 579E 2-1/8–3-1/2 1240-1140 33.50 579F 3-1/2–6" 1240-1145 42.00 S579GZ 5/16–2-1/8 Set w/Case 1240-1149 108.00 S579HZ 5/16 - 6" Set w/Case 1240-1150* 187.00 *shown

TELESCOPING GAGESSeries 579 • 5/16-6"Used for determining the true size of holes, slots and recesses. The handle is rigidly attached to the contact plunger body and is automatically self-centering. Handles on Models 579A thru E are approximately 2-3/8 long and Model 579F approximately 3-1/4 long. The ends of both contacts are hardened and ground to a radius to give proper clearance for the smallest hole the gage will enter.

MTI Order Price Range Model OAL Number Each .315-.5 155-121 4.33" 1284-0005 $24.00 .5-.748 155-122 4.33" 1284-0010 26.70 .748-1.26 155-123 4.33" 1284-0015 28.30 1.26-2.126 155-124 5.9" 1284-0020 29.90 2.126-3.54 155-125 5.9" 1284-0025 34.70 3.54-5.9 155-126 5.9" 1284-0030 38.95 6 Pc. Set 155-903 All Above 1284-0035 178.00

TELESCOPING GAGESSeries 155Satin chrome finished. Constant spring tension for uniform feel. The contact points are hardened & ground. Uniform contact pressure. Precision ground on the end measuring radius.

Digital Calipers & Telescoping Gages

• Lightweight, ergonomic design• Large easy-to-read LCD, .32” high• Inch/Millimeter conversion (reads .0005” or 0.01mm)• Zero at any position• Automatic shut-off after 5 minutes of nonuse• Last measuring position retained when shut off

Description Model No. Order No. Price0-6" (150mm) Caliper 799A-6/150 1240-3100 $140.000-8" (200mm) Caliper 799A-8/200 1240-3105 198.000-12" (300mm) Caliper 799A-12/300 1240-3110 372.00NEW! 0-24" (600mm) Caliper 799A2-24/600 1240-3210 666.00NEW! 0-40" (1000mm) Caliper 799A2-40/1000 1240-3215 1,336.00

• Easy access to the single,battery• Hardened stainless steel body• Integrated depth rod on all sizes • Fine adjustment thumb wheel• Lock screw holds slide in position• Resolution is .0005” (0.01mm)• Linear accuracy meets DIN862• Fitted plastic case

ELECTRONIC CALIPER 799 SERIES

B&S No. EDP No. Range Order No. Price 05.30202 28309 0-8"/0-200mm 1330-2040 $263.0005.30203 28310 0-12"/0-300mm 1330-2045 391.00

SHOP-CAL DIGITAL CALIPERSModel No. 00590090 EDP No. 20971The Shop-Cal provides easy- to- read, accura te measurements of day-to-day operations. Stainless steel for durable, reliable and accurate measurements.

Order No. 1330-2000

$114.00

IP65 DIGITAL ELECTRONIC CALIPERS

Liquid Resistant - the caliper with no limits. Equipped with the patented magnetic measuring system and entirely Swiss made, Brown & Sharpe IP65 Calipers feature high mechanical precision, including measuring jaws made of stainless steel (hardened and ground) and a protected magnetic scale, coated with resistant film, which promotes high reliability under extreme conditions. Specifications consistent with DIN 862. A large, 1/4" LC display. Auto shut-off after 2 hours. Instant inch/metric conversion.Length 1.5"/ 40mm. Resolution: .0005"/0.01mm.

Absolute Measuring systemRange: ................... .0005"/0.01 mmResolution: ............. .0005"/0.01mmSpecifications consistant with DIN 862. Absolute and differential mea-suring system. A large, 1/4" LC dis-play for easy readings.Auto shut-off. Instant inch/metric conversion.

Power supply: 3V litium battery, type CR 2032Battery life: ......... approx. 1.5 years


PRECISION EQUIPMENT

E175

3-PC. ELECTRONICSETModel 8000-S3Caliper, Indicator & Fine Adjust Magnetic Base Set Includes: 6" Electronic caliper, 0.00005"/0.001mm resolution, float-ing zero, thumb roll, locking nut, battery included. 1" Travel Electronic Dial Indicator 0.001"/0.01mm with floating zero, lug back and battery. Magnet base with 80 lb. holding power, on/off switch, fine adjust rod and two adjustable holding clamps.

Order No. 1266-0326 ............................................$89.95

3 PC. STANDARD PRECISION TOOL KIT6" Precision Vernier Caliper:Chrome clad, .001" and 1/50mm scales. 4-way measurements; Inside, outside, step and depth.

0-1" Carbide Faced Mic.0001" Graduation, positive locking clamp, ratchet thimble.

6" x 3/4" Rule:Stainless, chrome clad rule with scales of 16ths, 32nds, 64ths and 100ths. Complete with fitted case.

Order No.1266-0200 ................................................. $19.45Reg. $19.95

6" Precision Vernier Caliper:Chrome clad, .02mm & .001" scales. Inside, outside, step and depth.

0-25mm Micrometer:.01mm graduations, carbide faces, locking clamp, ratchet thimble.

6" x 1/2" Rule:1/2mm & mm graduations on both sides, chrome clad. Complete with fitted case.

Order No.1266-0215 .................................................$19.45Reg. $19.95

CHOOSE INCH STYLE KIT…

OR CHOOSE METRIC STYLE KIT…

3 PC. PRECISION TOOL KIT6" Dial Caliper:.100" Revolution. .001" Resolution. Inside, outside, depth and step measurement.

0-1" Carbide-face Micrometer:.0001" Graduation. Positive locking clamp. Ratchet thimble.

6" x 1/2 5R Flexible Rule:Satin-chrome finish. 10ths, 100ths, 32nds, 64ths. Complete in fitted case.

White Dial Caliper Kit: Order No. 1252-9900Black Dial Caliper Kit: Order No. 1252-9901 Your Choice Just $27.60/setReg. $36.00

4 PC. PRECISION TOOL KIT6" Dial Caliper:Chrome clad, .100" revolution. Inside, outside, depth and step measurements.

0-1" Carbide-Faced Micrometer:.0001" Graduation, positive locking clamp, ratchet thimble.

4" x 3" Ground Machinist’s Square and 6" x 1/2" Flexible Rule:Chrome clad, stainless rule, scales are 32nds, 64ths, 1/2mm and 1mm. Fitted case.

White Dial Caliper Kit: Order No. 1266-0195Black Dial Caliper Kit: Order No. 1266-0225

Your Choice Just $33.90/setReg. $39.50

CHOOSE WHITE OR BLACK DIALS…

CHOOSE WHITE OR BLACK DIALS…

Tool Kits

SHOP-CAL TOOLKIT W/CLASSICMASTER MICPart # 599-868-150EDP # 31250Featuring Brown & Sharpe SHOP-CAL Digital CaliperEconomical Swiss-made quality and design. Absolute measuring system.Range: 0-6"/0-150 mmSpecifications consistent with DIN 862. Absolute and differential measuring system. A large 1/4" LC display for easy readings. Auto shut-off. Instant inch/metric conversion. Power supply: 3V lithium-battery, type CR 2032Battery life: approx. 1.5 years

BROWN & SHARPE CLASSICMASTER 0-1" MICROMETERPart # 599-1-50Attractive Swiss made design with blue enamel frame. Friction drive guarantees constant mea-suring force. Slanted graduation lines for easy, error-free reading. Tungsten carbide measuring face, .256" (6.5mm)Shop-Hardened Plastic Case

Normal list price for these items $233.30

Order No. 1330-3000

$99.95

Limited Supply!


PRECISION EQUIPMENT

E176

PRECISION INSTRUMENTS KIT6" Dial Caliper, 0-1" Micrometer and 6" x 1/2, 5R Flexible Rule together in Fitted Case

1" DIAL INDICATOR & MAGNETIC BASE SET1" Travel Dial Indicator:Revolution counter. .001" graduation, 1" range, 0-100 reading, satin finish, chrome plated case. Hard chrome plated stem. Contact point is hardened & ground chrome plated tool steel. 2" Diameter dial. Magnetic Base: Has ON/OFF lever to release magnet. 132 lbs. of force, permanent magnet. Accepts all AGD dial indicator hacks and stems. Accepts dial test indicator stems 3/8 dia. and 5/16 dia. Universal adjustment; horizontal and vertical.

$82.95 if purchased seperately

$75.95Order No. 1267-9910

4 PC. SQUARE SETSquare Head, Center Head, Reversible Protractor & 12" 4R Blade.

2

3

GET ALL 3 PIECESONE LOW PRICE!

DIGITAL CALIPER6"/150MMInside, Outside, Depth & StepVernier reads every 10mm from 0-150mm. Thumb roller for easy movement. LCD display. (1) Silver oxide battery SR44 (included).Measuring range ...........................................................................................0-6"/1-150mmResolution ................................................................................................. 0.0005"/0.01mmAccuracy ................................................................................................... 0.001"/±0.03mmRepeatability ............................................................................................. 0.0005"/0.01mmMax. measuring speed ........................................................................... 60"/1.5m per sec.Working temperature ....................................................................................... 41 to 104°F.

ELECTRONIC DIGITAL INDICATOR 0-1/2" Range: 0 .513" /13 mm. Reso lu t ion : .0005"/.01mm. On/Off. Zero-set. Inch/metric conversion. ABS. Tolerence and Set Value functions.

FINE ADJUSTMENT MAGNETIC BASEOn/off lever releases 132 lb. force permanent magnet. Accepts all AGD dial indicator hacks and stems. Accepts dial test indicator stems 3/8" diameter and 5/16" diameter universal adjustment; horizontal and vertical.

PRECISION TOOL SET BUY ALL 3 TOGETHER & SAVE!Order No. 1267-0200

$76.95

2

1

3

6 PC. MEASURING TOOL KITModel 135-0012Includes the following: 6" .001" white face dial caliper, 1" .001" white face dial indicator, 0-15-0 .0005" white face test indicator. Also a 0-1" .0001" outside micrometer, a magnetic base with fine adjustment, and a 22 piece indicator point set in all plastic case. Order No. 1266-9910

$97.95Reg. $99.00

Tool Kits

1

6 PC. MEASURING TOOL KITModel 135-0018Includes the following: 6" .001" white face dial caliper, 0-1" .0001" outside micrometer. A square head, protractor head, and center head. Plus a 12"4R (8ths, 16ths, 32nds & 64ths) combination square blade all in plastic case.Order No. 1266-9920

$64.95Reg. $69.00

22 PC. INDICATOR POINTS KITMade of the highest quality steel, carefully knurled and manufactured to applicable specifications. Each point is manufactured with 4-48 threads for use with AGD 1-2-3-4 and ANSI spec. indicators.

Order No. 1272-0055

$10.95Reg. $12.95


PRECISION EQUIPMENT

E177

Indicator Sets

BAKER INDICATOR & WT BASE SETDial Indicator Model JB50:.001 Graduations, with revolution counter. 0-100 dial reading. Hardened and ground contact point. Satin chrome plated case. Hard chrome plated stem, 2" diameter face.

WT Mag Base w/Fine Adjustment:Has on/off lever to release magnet. 132 lbs. of force, permanent magnet. Accepts all AGD dial indicator hacks and stems. Accepts dial test indicator stems 3/8" diameter and 5/16" diameter. Universal adjustment; horizontal and vertical.

Order No. 1267-0070

$39.95/setReg. $45.90

BAKER INDICATOR & WT'S MAG BASEBaker Dial Indicator: ADG Group 2 with revolution counter. Reading is 0-100, 1.0" travel, .001" graduation.

WT Mag Base w/Fine Adjustment:Has ON and OFF lever to release magnet. 132 lbs. of force, permanent magnet. Accepts all ADG dial indicator hacks and stems. Accepts dial test indicator stems 3/8" diameter and 5/16" diameter. Horizontal and vertical universal adjustment. Comes with fine adjustment.

Order No. 1267-0085

$35.95Reg. $43.90

…this dial indicator is made by Baker with our name on the face!

TEAMING UP AGAIN…Choose from 2 indicator styles with our Magnetic Base!

…this set has a Baker indicator,

supported by our own WT mag

base!

DIAL INDICATOR & MAGNETIC BASE SETWith Fine AdjustmentA must for all machinists! Includes a dial indicator 0-1" & magnetic base in a blow molded carrying case.

Order No. 1267-0005

$18.95Standard Adjusting Arm For Magnetic BaseWith arm clamps and indicator stem. 8mm x 1.25 threaded arm.

Order No. 1276-0160$2.00 or $1.50 Lots of 6

or purchase the 1267-0010 set along with our 22 pc. Indicator Point Set - A $10.95 Value!Order No. 1267-0050

INDICATOR,BASE AND POINTS All for Just$24.15

INDICATOR & BASE SET1" Travel Dial Indicator:.001" graduations, 0-100 reading. 2" diameter dial. Chrome plated. Hardened stem and contact point.Reg. $15.00.Mag Base w/Fine Adjustment:Permanent magnet with 132 lbs. of force. On/Off lever release,with universal adjustment.Reg. $21.00

Order No. 1267-0010

$22.95Reg. $31.95

ANTI-GLARE INDICATOR, BASE, & 8" DIAL CALIPER SETSet includes a 1" Travel Dial Indicator with .001" graduations, 0-100 reading, 2" diameter black dial. Hardened stem and contact point. A Magnetic Base with universal adjustment 132 lbs of force, on/off lever release. Plus an 8" Dial Caliper with inside, outside, depth and step measurement. .100 dial revolution, vernier readings in inch. Stainless steel surface with adjustable non-glare black dial, .001 dial graduations.

Order No. 1267-0100

$46.95Reg. $65.50


PRECISION EQUIPMENT

E178

Indicators Sets

METRIC DIAL INDICATOR.01mm Graduations0-5mm Range. 0-100 Dial reading. 1-1/2" Diameter dial. Stem: 8mm. Revolution counter, satin finish, chrome plated, jewelled movement. Contact point is hardened and ground chrome plated steel.Order No. 1272-0145

$17.55Reg. $29.00

Indicator & USA Magnetic Holder: $22.95Order No. 1267-0075Reg. $26.95

1" INDICATOR & MAGNETICINDICATOR HOLDER SETWT's 1" Dial Indicator:.001 Graduations, 0-100 dial reading, 2" diameter dial, revolution counter, satin finish and chrome plated. Jeweled movement. Hard chrome plated stem. Contact point is hardened ground chrome plated steel.

WT's Magnetic Indicator Holder:A universal magnetic base that will save time and improve accuracy. Strong magnet with 45 lbs. of holding power. Zinc die cast housing. 4-1/2 x 1" x 1-1/4. Five different locations for mounting accessories. Three positions, 1/4-20 for lug mounts. One tapped hole 10-32, one reamed hole 3/8".

Indicator & WT Magnetic Holder: $18.35Order No. 1267-0080Reg. $20.95

INDICATOR & BASE SETModel 657EZ with CaseDial Indicator:AGD Group 2, 2-1/4" diameter, with jeweled bearings. No. 25-131 indicator furnished with No. 657E (graduation .00005") dial reading 0-25-0, range .125".Magnetic Base:Push-button on/off switch for one hand operation. Black wrinkle finish on non-working surfaces. Base has three precision ground magnetic contact surfaces. Grips horizontally, vertically or upside down. V-step holds base to arbors, shafts, chucks, and other round surfaces. Extra 1/4-20NC tapped hole in one side of base (not shown) for mounting post. 3/8" Diameter post. Holding rod has clamping mechanism for gripping lug back of AGD dial indicators.

Order No. 1240-1725

$363.00

ANTI-GLARE INDICATOR & BASE SET1" Travel Black Face Indicator. Magnetic base without fine adjustment.

Order No. 1267-0020

$21.95Reg. $24.95

2" TRAVEL INDICATOR & MAGNETIC BASE SETWT's 2" Travel Dial Indicator:.001 Graduations, 0-100 reading. 2" Diameter dial, chrome plated, hardened stem & contact point.Reg. $39.00WT's Mag Base w/Fine Adjustment:Permanent magnet with 132 lbs. of force. On/Off lever release, with universal adjustment.Reg. $21.00

Order No. 1267-0065

$39.95/setReg. $47.50

GRANITE CHECK & INDICATOR SETIt's a black granite surface plate

& a dial comparator stand in one!

Black Granite Surface Plate:Microscrew fingertip control. .00005" flatness. Extreme stability. Full 6" square, 8" column, 2" thick base, 10" Overall Height. Has fine adjustment. Accepts all AGD indicators.

1" Travel Dial Indicator:.001" graduation, 0-100 reading, 2" dia. (WT Model 1272-0005).A $15.00 Value

Order No.

$27.95Reg.$59.00


PRECISION EQUIPMENT

E179

0-2"

DIAL INDICATORS.001" Graduations0-100 Dial reading, 2" diameter dial, revolution counter, satin finish, Chrome plated, jeweled movement. Hard chrome plated stem. Contact point hardened and ground chrome plated steel.

Travel Order Reg. Price Range Number Price Each 0-1" 1272-0005 $15.00 $10.95 *0-1" 1272-0090 15.00 10.95 0-2" 1272-0075 39.00 29.65* With Black Dial

1" DIAL INDICATOR.001" GraduationHardened and ground contact point. Satin chrome plated case. Hard chrome plated stem. 2" diameter dial. Central lug back with 1/4" diameter hole. AGD Group 2 with revolution counter. Reading is 0-100, 1.0" travel. Made especially for Wholesale Tool!

Order No. 1272-0140

$27.95

WHOLESALE TOOL & BAKER HAVE TEAMED UP TO BRING YOU THIS UNIQUE

INDICATOR WITH OUR NAME ON THE DIAL!

DIAL INDICATORS.001 Graduations, Revolution CounterHardened & ground contact points. Satin chrome plated cases. Hard chrome plated stem. 2" diameter face. Central lug back with 1/4 diameter hole.

Baker Order Price Model Range Reading Number Each JB50 1.00" 0-100 1272-0105 $29.95 JB51 0.50 0-50-0 1272-0110 29.95 JB52 0.50 0-100 1272-0115 29.95 JB45 0.25 0-50-0 1272-0120 29.95

Indicators

CHICAGO DIAL INDICATORS ISO 9001/2000

Features: • One piece brass forged case• Chrome plated finish• Heat treated 416 stainless steel rack & gears• Included with each indicator:• 2-Position Lug & Flat back• Long form cert., traceable to NIST

Limited Quantity

Limited QuantityDIAL INDICATORSSERIES 252-1/4" Diameter, AGD Group 2, shockless, hardened steel gear train. Conforms to AGD specifications except for range. Continuous reading double dial with direct reading count hands. Jeweled bearings only, and with lug-on center back unless otherwise ordered. Hardened rack, pinions & gears resist shock & wear.

Short Range

Medium Range

Long Range

Short Range Indicators Model Range Dial Order Price No. One Rev. Total Reading Grad. Number Each 25-111J .010 .025 0-5-0 .0001" 1240-0995 $202.00 25-511J .010 .200 0-5-0 .0001" 1240-1000 232.00 25-131J .050 .125 0-25-0 .0005" 1240-1005 123.00 25-141J .100 .250 0-50-0 .001" 1240-1010 123.00

Medium Range Indicators Model Range Dial Order Price No. One Rev. Total Reading Grad. Number Each 25-431J .050 .500 0-50 .0005" 1240-1015 $142.00 25-631J .050 1.000 0-50 .0005" 1240-1020 248.00 25-441/5J .100 .500 0-100 .001" 1240-1025 123.00 25-441J .100 1.000 0-100 .001" 1240-1030 123.00 25-881J 1.0mm 25mm 0-100 .01mm 1240-2225 173.00

Long Range Indicators - All Jeweled Bearings Model Rev. of Order Price No. Hand Range Reading Grad. Number Each 25-2041J 20 2.000 0-100 .001" 1240-1035 $239.00 25-3041J 30 3.000 0-100 .001" 1240-1040 311.00 25-4041J 40 4.000 0-100 .001" 1240-1045 369.00 25-5041J 50 5.000 0-100 .001" 1240-1050 428.00

AGD GROUP 1 INDICATORSTotal Grads Range Dial Model Order PriceRange Per Rev. Face Number Number Each.025 .0001 .010 0-5-0 10251BJ 1229-0005 $79.00.125 .001 .050 0-50 11254C 1229-0020 49.002.5mm .01mm 1.0 0-100 51025C 1229-0035 59.00

AGD GROUP 2 INDICATORSTotal Grads Range Dial Model Order PriceRange Per Rev. Face Number Number Each.125 .001 .050 0-25-0 20254B 1229-0050 $49.00.125 .001 .050 0-50 20254C 1229-0055 49.00.250 .001 .100 0-50-0 22504B 1229-0060 49.00.250 .001 .100 0-100 22504C 1229-0065 49.00.5mm .002mm .2mm 0-20 52005C 1229-0080 89.00Note: Metric Indicators Supplied with Yellow Dials. J after the model number signifies Indicator Supplied with Jewel Bearings.


PRECISION EQUIPMENT

E180

DIAL INDICATORS SERIES 2with Revolution Counters MTI Order Price No. Reading Travel Grad. Number Each 2410S 0-100 .25" .001" 1271-0025 $89.05 2411S 0-50-0 .25" .001" 1271-0030 89.05 2414S 0-100 .50" .001" 1271-0035 95.45 2415S 0-50-0 .50" .001" 1271-0040 95.45 2416S 0-100 1.0" .001" 1271-0045 107.00 2417S 0-50-0 1.0" .001" 1271-0050 107.00

DIAL INDICATORS SERIES 2Shock-Proof • Jeweled Bearing with Revolution CountersSame features as regular Series 2 Indicators, except these indicators are shock-proof with jeweled bearings. MTI Order Price No. Reading Travel Grad. Number Each 2803S-10 0-5-0 .025" .0001" 1271-0085 $139.00 2804S-10 0-10 .05" .0001" 1271-0090 143.00 2805S-10 0-5-0 .05" .0001" 1271-0095 143.00*2923S-10 0-5-0 .05" .0001" 1271-0100 141.00*± Reversed Dial

Indicators

Mitutoyo’s affordable

one revolution indicator with the full

sector bright red no-read zone!

ONE REVOLUTION SERIES 2 DIAL INDICATORSReduce or eliminate reading errors with Mitutoyo’s affordable one revolution indicator with the full sector bright red no-read zone. The fiberglass reinforced one-piece molded case make these indicators lighter and more durable without sacrificing the accuracy you have come to depend on from Mitutoyo.

MTI Dial Order Price No. Graduation Range Reading Number Each 2976 .0005" .020" 10-0-10 1271-0500 $70.45 2977 .0005" .040" 20-0-20 1271-0505 58.70 2978 .001" .060" 30-0-30 1271-0510 64.05Note: Flat Back Only

QUICK-SET TEST INDICATORSAdjustable bezel and dial. Easily set and reset to zero. Set includes 2 dovetail clamps, (1) 5/32 post and (1) 3/8 post. Reading 0-15-0. Graduation .0005". .030" Range.White Dial: Order No. 1272-0085Black Dial: Order No. 1270-0010

Sale $23.00 Each Reg. $29.00

12° POSITIONAL DIAL TEST INDICATORThis indicator is designed to provide a true reading when the angle between the contact point and component surface is 12°.Specifications: Reading: 0-15-0Scale Interval: .0005"Measuring Range: .060"Face Diameter: 1.5"Contact Lengths: .687" (.080 T.P)Max. Deviation (one rotation): .0004"Max. deviation (total): .0012"Repeatability: .0002"Backlash: .0002(2) Dovetail extensions included.

Order No. 1272-0250

$59.00

RANGE .03" TEST INDICATORModel B301 Auto Reverse.0005 graduations., .03" range. Dial reading 0-15-0. Fully jeweled movement. Adjustable bezel and dial. Comes with 2 contact points: .040 & .080, 2 dovetail attachments: 1/4 & 3/8, swivel clamp, height gage adaptor & fitted case.

Order No. 1272-0125 ...................................................$89.00

HORIZONTAL TEST INDICATORDial reading: 0-15-0. Jeweled movement. Revolution counter. Easy to read tilted dial. Automatic reversal. 210° swivel arc. Tungsten carbide .080" point. .060" range. .0005" graduations. 1.5" Dial daimeter.

OrdeR NO. 1272-0300

$69.00


PRECISION EQUIPMENT

E181

Test Indicators

"QUICK-SET"TEST INDICATORS

Series 513 Anti-Magneticwith Jeweled Bearings

O-Ring incorporated in new bezel design seals instrument from dust and oil mist. Enlarged pitch of teeth on crown gear improves ability to withstand shock. Rubber bumpers limit travel of sector gear and prevent damage due to excess travel. Special alloy of sector gear provides greater resistance to wear, and longer distance between pivot points of linkage for protection against shock. Carbide point, .078" Dia. is standard. Dovetails, integral with housing, give broad flexibility for mounting of instruments.

MTI Order Price Model Range Reading Grad. Accuracy Type Number Each513-403 .008" 0-4-0 .0001" ±.0001" Horiz. 1274-0040 $146.00513-402 .03" 0-15-0 .0005" ±.0005" Horiz. 1274-0050 113.00513-412 .03" 0-15-0 .0005" ±.0005" Horiz. 1274-0070 161.00

The Quick Set Test Indicator Sets include:• Test Indicator with .078” (2mm) carbide contact point• 3/8” (8mm) and 5/32” (4mm) stems• Swivel clamp for 5/32” (4mm) and 3/8” (8mm) stems• Square arm, stem nut• .039” (1mm) and .118” (3mm) contact point

MTI Order Price Model Grad. Range Read. Comment Number Each513-402T .0005" .030" 0-15-0 Set 1274-0060 $134.00513-403T .0001" .008" 0-4-0 Set 1274-0065 172.00513-412T .0005" .030" 0-15-0 Long point set 1274-0075 186.00Pocket Style Test indicator513-518T .001" .040" 0-20-0 Set 1273-0020 119.00Universal Type Test indicator513-302GT .0005" .030" 0-15-0 Set 1273-0025 389.00

HORIZONTAL QUICK SET TEST INDICATOR SETS

NEW! DIAL TEST INDICATOR SETSHorizontal TypeTest indicator, dial reading 0-15-0. Two con-tact points. 3/8" & 1/4" dovetail stems. Con-tact point wrench. Height gage bar. Universal dovetail clamp. Fitted plastic case.

White Face Order No. 1272-0290

Black Face Order No. 1272-0295

Your choice $52.00 each

NEW! TEST INDICATOR AND ACCESSORY COMBO KITLarge size dial test indicator. Axial support. Height gage bar with clamp. Universal holder. Adaptor sleeve. Contact point case. Contact point wrench. Finished in fited. Total range: 0.060". Graduation: 0.0005". Dial diameter: 1-1/2"

Order No. 1272-0305

$84.00

1Z\x.168

1Z\,

1Z\x

.374

Z\v

1Z\nv

+.000–.002

BesTest® Universal Test Indicator… Smallest Dial B&S Order Price Range Marking Division Dia. Model Number Each .200" 0-100 .001" 1-1/2 599-7039 1330-1075 $149.00Replacement Points for 599-7039… Regular Point 599-7039-1 1330-1080 6.30 3/8" Dia. Button Point 599-7039-2 1330-1085 9.10BesTest® Universal Test Indicator Set… Inch Indicator Set with Case 599-7739 1330-1095 289.00

COMPONENTS FOR INDICATOR SETS (Inch and Metric) B&S Order Price Description Model Number EachSwivel… for posts .312" dia. & mounting rods .220" to .250" dia. 599-7739-1 1330-1100 $18.50Clamp… 1-15/16 range & 1/4-28 threaded hole. 599-7739-2 1330-1105 59.85Hole Attachment withIndicator Mounting Hole… .375" dia. & finger 7/32 dia.,1-7/8 reach. 599-7739-3 1330-1110 31.35Bar: 5-5/16" Long x3/8" Thick x 3/4" High… With tapped thru-holes at top, bottom, & both sides of front plus 1 tapped hole at back end for attaching holding rods. 599-7739-4 1330-1115 37.00Holding Rod… .312" x 5" long. 599-7739-5 1330-1120 12.50Holding Rod… .312" x 3" long. 599-7739-6 1330-1125 8.20

BESTEST® UNIVERSALTEST INDICATORS & SETSFull Jewelled Movement in a Universal Indicator


PRECISION EQUIPMENT

E182

DIAL TEST INDICATORSWith Dovetail MountsNo. 708 and No. 709 Series Dovetail Mount Dial Test Indicators have fully jeweled movements for smooth action and a precision gear driven design for highly accurate readings. Narrow Body. Jeweled movement. Easy-to-read. 3 Integral dovetails meet ISO specifications. 13/16 long contact. Rotatable bezel. Precision gear driven design. Contact point reverses automatically. Single and double revolution Models. Frictionally adjustable contact. Clockwise hand rotation. Precision machined body. BZ & BCZ Models come with revolution counter. Standardized dovetails work with existing dial test indicator accessories.

Model Dial Order Price Number Description Grad. Number Each 711GCSZ Indicator w/ all .001" 1240-0915 $200.00 attachments in case. 711LCSZ Indicator w/ all .0005" 1240-0920 204.00 attachments in case. 711GPSZ Indicator w/ universal .001" 1240-0925 142.00 friction holder & shank w/case. 711LPSZ Indicator w/ universal .0005" 1240-0930 146.00 friction holder & shank w/case.

INDICATOR WITH UNIVERSAL SHANK Model Dial Order Price Number Description Grad. Number Each 711FSAZ Indicator with .001" 1240-0935 $149.00 universal shank and case.

711HSAZ Indicator with .0005" 1240-0940 149.00 universal shank and case.

LAST WORD® DIAL INDICATORS0-15-0 Reading • .030" RangeFor precise indicating in machining, layout, inspection. Jeweled lever for extra smooth indicator action. Reversible action. Swiveling tubular body. Hard chrome plated ratchet contact point. With universal friction holder, universal shank and case, shaded dial for jig borer use.

708 Series • Dial Reading 0 -5- 0 Model Face Order Price Number Color Grad. Range Description Number Each 708AZ White .0001" .010 NO attachments 1240-0840 $253.00 B708AZ Black .0001" .010 NO attachments 1240-0841 253.00 R708AZ Red .0001" .010 NO attachments 1240-0842 253.00 708ACZ White .0001" .010 ALL attachments 1240-0845 319.00 B708ACZ Black .0001" .010 ALL attachments 1240-0846 319.00 R708ACZ Red .0001" .010 ALL attachments 1240-0847 319.00 708BZ White .0001" .020 NO attachments 1240-0850 304.00 708BCZ White .0001" .020 ALL attachments 1240-0855 372.00

709 Series • Dial Reading 0 - 15 - 0 Model Face Order Price Number Color Grad. Range Description Number Each 709AZ White .0005" .030 NO attachments 1240-0860 $216.00 B709AZ Black .0005" .030 NO attachments 1240-0861 216.00 R709AZ Red .0005" .030 NO attachments 1240-0862 216.00 709ACZ White .0005" .030 ALL attachments 1240-0865 263.00 B709ACZ Black .0005" .030 ALL attachments 1240-0866 263.00 R709ACZ Red .0005" .030 ALL attachments 1240-0867 263.00 709BZ White .0005" .060 NO attachments 1240-0870 260.00 709BCZ White .0005" .060 ALL attachments 1240-0875 327.00 *709MAZ Yellow .01mm .8mm NO attachments 1240-0880 253.00 *709MACZ Yellow .01mm .8mm ALL attachments 1240-0885 319.00* Dial Reading 0 - 40 - 0

Test Indicators

DIAL TEST INDICATORSSeries 650 with Deep Hole AttachmentBack Plunger Indicators include a detachable deep hole attachment interconnecting directly with the main spindle for positive action. The attachment is ideal for checking internal dimensions of a workpiece while in fixtures or machines. The attachment can easily be removed for other applications. Both models have 1-11/16 diameter bezels, adjustable dials to set zero at any point opposite the hand. The indicator mounting rod measures 1/4" diameter x 3-3/16 long. The back plunger stem is AGD 3/8 diameter x 5/8 long. The indicators are furnished with three different AGD contact points for use in most applications. Dial: 0-100. Starrett Order Price Model Description Number Each 650A1Z Indicator with 3 contact 1240-1555 $312.00 points, detachable deep hole attachment, plus 3 accessory attachments in case. 650B1 Indicator with 3 contact 1240-1560 $241.00 points & detachable deep hole attachment only.

SWIVEL HEAD DIAL INDICATORSeries No. 811 •Head swivels at 0°, 45°, 90° & in between!Contact lever is automatically reversible…The 811 uses your present dovetail attachments, meets international ISO specs. Jeweled bearings.

Model Order Price No. EDP Reading Description Number Each 811-5CZ 57079 .0005" With attachments, 1240-2205 $403.00 white dial in case. 811-5PZ 57080 .0005" White dial in case only. 1240-2210 358.00 811-1CZ 57081 .001" With attachments, 1240-2215 393.00 white dial in case. 811-1PZ 57082 .001" White dial in case only. 1240-2220 355.00

UNIVERSAL DIAL TEST INDICATORSGraduation . 001", Range .200", Dial Reading 0-100Model 196A1Z Indicator Set…with continuous dial, 3 contact points, hole attachment, clamp, tool post holder, sleeve adaptor for contact points with 4-48 thread and fitted case.

Order No. 1240-1055

$180.00Model 196B1 Indicator Only…with continuous dial, 3 contact points and adaptor for contact points with 4-48 thread.

Order No. 1240-0010

$103.00

708

709


PRECISION EQUIPMENT

E183

BESTEST® INDICATORS - TOP MOUNTED DIALSBesTest® Indicators with top mounted dials are supplied with a Rectangular Bar, Swivel Clamp, Contact Point, Wrench and a Certificate of Accuracy and Traceability in a handsome fitted case. Contact points are 1/2 (12.5mm) long. Carbide tips are .080" (2mm) diameter. Available with either 1" (28mm) or 1-1/2 (38mm) diameter dials. Smallest Dial B&S Order Price Range Marking Div. Dia. No. Number EachInch Reading (±.0001" Repeatability, ±.0005" Calibration Accuracy) .030" 0-15-0 .001" 1" 599-7029-3 1330-1000 $184.00 .030" 0-15-0 .0005" 1" 599-7030-3 1330-1005 191.00 .030" 0-15-0 .0005" 1-1/2 599-7031-3 1330-1010 198.00Inch Reading (±.00002" Repeatability, ±.0001" Calibration Accuracy) .008" 0-4-0 .0001" 1" 599-7032-3 1330-1015 $214.00 .008" 0-4-0 .0001" 1-1/2 599-7023-3 1330-1020 248.00 .008" 0-4-0 .00005" 1-1/2 599-7033-3 1330-1025 248.00

599-7030-3

599-7032-3BESTEST® INDICATORS END MOUNTED DIALSContact points are 1/2 long. Carbide tip is .080" diameter. All BesTest® Indicators with end mounted dials come with a No. 599-7054 universal Dovetail Mounting Attachment, Contact Point, Wrench, and a Certificate of Accuracy and Traceability in a handsome fitted case. Smallest Dial Repeat- Calibration B&S Order Price Range Marking Div. Dia. ability Accuracy No. Number Each Inch Reading .030" 0-15-0 .0005" 1" ±.0001" .0005" 599-7037-3 1330-1050 $252.00 .008" 0-4-0 .0001" 1-1/2 ±.00002" .0001" 599-7024-3 1330-1055 284.00 .008" 0-4-0 .00005" 1-1/2 ±.00002" .0001" 599-7038-3 1330-1060 284.00

BESTEST® INDICATORS - SIDE MOUNTED DIALSContact points are 1/2 long. Carbide tip is .080" diameter. Ideal for height gages, transfer gages and Digit-Hite, plus. Supplied with a Rectangular Bar, Swivel Clamp, Contact Point, Wrench, and a Certificate of Accuracy and Traceability in a handsome fitted case. Smallest Dial Repeat- Calibration B&S Order Price Range Marking Div. Dia. ability Accuracy No. Number EachInch Reading .030" 0-15-0 .0005" 1-1/2 ±.0001" 0005" 599-7021-3 1330-1065 $280.00 .008" 0-4-0 .00005" 1-1/2 ±.00007" .0001" 599-7022-3 1330-1070 315.00

Swiss Made

End Mounted

Dial Interapid Order Price Grad. Range Dia. 312# Model Number EachHorizontal Indicators .0005" .060" 1.5" b1 74.111370 1263-0005 $226.00 .0005" .060" 1" b2 74.111371 1263-0010 224.00 .0001" .016" 1.5" b3 74.111372 1263-0015 282.00 .001" .060" 1" b20 74.111374 1263-0055 221.00Vertical Indicators .0005" .060" 1.5" b1v 74.111377 1263-0060 243.00 .0005" .060" 1" b2v 74.111378 1263-0065 237.00

Side Mounted

INDICATORSHigh rigidity, one-piece solid case. With revolution counter. Horizontal, easy to read dial. Variety of mounting positions. High sensitivity, light measuring pressure. Fully reversible, swiveling through 210° without reversing lever. Jeweled mechanism w/ball bearings. All with .080" dia. Tungsten carbide contact points.

Test Indicators

UNIVERSAL TEST SETModel No. U52Versatile combinations for many difficult gaging applications. .001" Graduation, 0-100 dial reading. Supplied in wooden box.Range 0.1" Order No. 1272-0130 .......................$99.00

Reg. $119.00

FOR CARBIDE, STEEL OR RUBYCONTACT POINTS SEE PAGE 186

MAGNETIC BASES ON PAGES 188-192

CHECK OUT SURFACE GAGES ON PAGE 193


PRECISION EQUIPMENT

E184

Test Indicators

BESTEST® INDICATORS With Extra-Long Contact PointsTop mounted dials. Contact points are 1-7/16" long. Carbide tip is .080" diameter. Supplied with a rectangular bar, swivel clamp, contact point wrench and a certificate of accuracy and traceability in a handsome fitted case. Inch reading: .0001" repetition accuracy; .0005" calibration accuracy. Smallest Dial Model Order Price Range Marking Division Dia. Number Number Each .020" 0-10-0 .0005" 1" 599-7034-3 1330-0255 $249.00 .020" 0-10-0 .0005" 1-1/2 599-7035-3 1330-0260 263.00

BESTEST® INDICATORSWith Easy-Reading Jet-Console FacesHigh visibility orange hand on jet-console face. Constant clockwise rotation. Anti-magnetic and corrosion resistant. Contact point can be set over 210° arc. Carbide tip. Dovetails top, front and back. All pinions are mounted in jeweled bearings in an isolated assembly. Measuring is bidirectional with double lever system. Each BesTest® Indicator comes complete with (1) carbide tipped contact point; (1 ) 1/2" long x .250" diameter extension with dovetail; (1) contact point wrench; (1) durable molded case; certificate of accuracy and traceability.

Smallest Dial Point Tip Model Order Price Range Marking Division Dia. Length DIa. Number Number Each .030" 0-15-0 .001" 1" 1/2 .080" 599-7029-5 1330-0220 $145.00 .030" 0-15-0 .0005" 1" 0.5" .080" 599-7030-5 1330-0225 147.25 .030" 0-15-0 .0005" 1-1/2 1/2 .080" 599-7031-5 1330-0230 163.40 .008" 0-4-0 .0001" 1" 0.5" .080" 599-7032-5 1330-0235 197.60 .008" 0-4-0 .00005" 1-1/2 1/2 .080" 599-7033-5 1330-0240 208.00 .020" 0-10-0 .0005" 1" 1-7/16 .080" 599-7034-5 1330-0245 182.40 .020" 0-10-0 .0005" 1-1/2 1-7/16 .080" 599-7035-5 1330-0250 199.00

BESTEST® INDICATOR SETSComes complete with (3) carbide tipped contact points .40", .80" and .120"; (1) 1/2" long x .250" diameter extension with dovetail; (1) 1/2" long x .220" diameter extension with dovetail; (1) contact point wrench; (1) durable molded case; certificate of accuracy and traceability. Smallest Dial Model Order Price Range Marking Division Diameter Number Number Each

Inch Reading (±.00002" Repeatability, ±.0001" Calibration Accuracy) .008" 0-4-0 .0001" 1" 599-7032-6 1330-1040 $190.00 .008" 0-4-0 .0001" 1-1/2 599-7023-6 1330-1045 226.00

Inch Reading (±.0001" Repeatability, ±.0005" Calibration Accuracy) .030" 0-15-0 .0005" 1" 599-7030-6 1330-1030 $179.50 .030" 0-15-0 .0005" 1-1/2 599-7031-6 1330-1035 202.00

Swiss Made

CENTERING INDICATORSINCH .0005 Graduation, 6 Jeweled Bearings 0-40 Dial Reading with Revolution CounterWith the indicator dial remaining stationary as the spindle rotates you’ll be able to locate your work quickly & accurately. This will allow you to use both hands to position the machine table with the indicator facing you at all times. Locate the center of a workpiece or fixture on horizontal or vertical machines. Indicate internal & external diameters or center points. Set includes indicator, 3 internal feelers, 3 external feelers, center point feeler, and restraining arm.Length...................................................................... 5-1/2Shank ................................................ 3/8 Dia. x 7/8 LongFeeler Ball ..................................................1/8” DiameterMeasuring Range ................................... .250 Axis OffsetCapacity: Internal .................................................... 5/32 to 12” External ........................................................ 0 to 12”Speed ........................................Not to Exceed 800 RPMLocating Accuracy ................................................ ±.0002

Order No. 1272-0100 .......................... $75.95Reg. $79.00

METRIC 0.01mm Graduation, 6 Jeweled Bearings 0-50 Dial Reading with Revolution CounterLength.............................................................................................. 5-1/2Shank ........................................................................ 3/8 Dia. x 7/8 LongFeeler Ball ......................................................................... 1/8” DiameterMeasuring Range .......................................................0-3mm Axis OffsetCapacity: Internal ........................................................................ 4mm-300mm External ............................................................................. 0-300mmSpeed ................................................................Not to Exceed 800 RPMLocating Accuracy ........................................................................ ±.0002

Order No. 1272-0095 ............................................ $75.95Reg. $119.00

Dial ......................................................0-4 with rev. counterGraduations .............................................................. .0005"Length.........................................................................6-7/8"Shank ......................................................3/8 dia. x 7/8 longWeight ................................................................. 9-1/2 ozs.Shipping weight ...............................................1 lb., 14 ozs.Feeler ball .......................................................1/8" diameterMeasuring range .......................................... .250 axis offset*Capacity Internal: .................................... 5/32 to 4-1/4 dia. External: ....................................... 0 to 4-1/4 dia.Recommended Speed ................... No more than 800 RPMLocating accuracy .....................Within .0002" of true centerInitial positioning ........................................Within 7/16" dia.

circle of true location*Capacity can be increased to 12" diameter by use of ac-cessory feelers.

Accessories Available: Blake Order Price Model Description Range Number Each 851-C2 Feeler, Inside Dia., Carbide 4.250" 1239-0010 $30.85 852-C2 Feeler, Outside Dia., Carbide 4.250" 1239-0015 34.85 851-4 Feeler, Inside Dia. 8.000" 1239-0020 23.40 851-6 Feeler, Inside Dia. 12.000" 1239-0025 25.60 853 Assembly, Center Point Feeler –– 1239-0030 30.85 852-6 Feeler, Outside Max. Dia. 12.000" –– 1239-0035 31.75

CO-AX INDICATORSimplified method for centering a workpiece or fixture on horizontal or vertical machines, external or internal diameters, also with N/C, EDM and other hard-to-turn spindles. Face of the indicator remains stationary in any desired position while the machine spindle rotates. By using the Co-Ax Indicator with the machine spindle running, exact operating conditions are more nearly simulated for the centering operation since the influence of power transmission, lubricant flow, bearing characteristics and torque are integrated into the reading. No exact chucking necessary. Indicator dial remains stationary while spindle rotates. Complete with indicator, internal feeler, external feeler, restraining arm and fitted box.

Swiss Made

Order No. 1239-0005

$329.00


PRECISION EQUIPMENT

E185

Swiss Made

Digital Indicators

0-1/2" ELECTRONIC DIGITAL INDICATOR3 button operation (on/off, inch/mm, zero). Measuring range: 0-.575"/0-14.6mm. Resolution: .0005"/.01mm. Includes SR44 battery.

Order No. 1272-0175

$39.00

DIGITAL TEST INDICATOROrder No. 1272-0350

$99.95The digital test indicator offers easy reading, gearless measurements in both English and Metric display. Reads to 0.0001" (0.001mm) low measuring force. The measurement data can be output to an external data processor. inch/metric conversion. OFF/ON: power switch. Zero setting. Tolerance setting. Range: ±0.5mm/±0.02. Resolution: ±0.013mm/±.0005"

ELECTRONIC DIGITAL INDICATOR 0-1/2" Range: 0.513"/13 mm. Res-olution: .0005"/.01mm. On/Off. Zero-set. Inch/metric conversion. ABS. Tolerence and Set Value functions.

Order No. 1272-0200

$69.00Reg. $79.00

MTI Order Price Model Resolution Range Number Each 543-692 .00005" 0-.500"/12.7mm 1259-1300 $236.00 *543-692B .00005"/0.001mm 0-.500"/12.7mm 1259-1305 236.00 543-693 .0001" 0-.500"/12.7mm 1259-1310 236.00 *543-693B .0001"/0.001mm 0-.500"/12.7mm 1259-1315 236.00*Flat back.

IDS DIGIMATIC INDICATORSAbsolute Encoder• Inch/mm • Origin Setting • ± Counting directions• SPC output • Immune to Overspeed Errors• Approx. 20,000 hours battery life

MTI Order Price Model Description Range Number EachResolution .0005"/0.01mm 543-402b flat back .500"/12.5mm 1259-1320 $268.00 543-402 lug back .500"/12.5mm 1259-1325 268.00 543-456b flat back 1"/25mm 1259-1350 393.00 543-466b flat back 2"/50mm 1259-1365 517.00Resolution .00005"/.0001"/.0005"/0.001mm/0.01mm 543-252 lug back .500"/12.5mm 1259-1345 368.00 543-252b flat back .500"/12.5mm 1259-1340 368.00 543-452b flat back 1"/25mm 1259-1360 492.00 543-492b flat back .2"/50mm 1259-1375 600.00OPTIONAL: Lug on center back Order No.1259-1380 $9.95

ID-C DIGIMATIC INDICATORS Absolute Encoder• Absolute encoder ensures all settings and read-ings are maintained for the life of the battery (even when the power is off).• Preset, Zero-set, inch/mm, ± direction and GO/±NG functions• Face rotates 330° for use at various angles. • Immune to Overspeed Errors• SPC output

ABSOLUTE IDS DIGIMATIC INDICATORSSeries 543 Absolute Linear EncoderMeasurement error from spindle overspeed is eliminated with the Absolute Encoder. After initial zero setting, zero setting is no longer necessary over the entire battery life. Large, LCD (8.5mm character height) and simple key operation. Power on/off, origin setting, counting direction switch, SPC output, inch/metric conversion, low battery voltage alarm, scale contamination alarm. Battery is silver oxide cell (SR44) with 20,000 hours continuous use. Operating temperature 0°C-40°C, storage temperature -10°C-60°C. Accuracy .0008".

MTI Order Price Model Back Range Resolution Number Each 543-683 Lug Back 0-.5" .0005"/0.01mm 1259-0950 $153.00 543-683B Flat Back 0-.5" .0005"/0.01mm 1259-0990 153.00

MTI Order Price Model Range Resolution Accuracy Number Each 543-551A 0-25mm Metric 0.003mm 1259-0971 $119.00 543-553A 0-50mm Metric 0.006mm 1259-0980 129.00

ABSOLUTE IDF DIGIMATIC INDICATORSSeries 543 with Absolute Encoder TechnologyGo/No Go judgement is performed by setting the upper and lower tolerances. Tolerance judgement can be made at a glance. Displays the max./min. value and a runout during TIR measurement. Allows a display value to be zero-set at any spindle position.

Limited Quantity


PRECISION EQUIPMENT

E186

AXIAL SUPPORT BRACKETModel Z9610Used for mounting indicators with dovetails or rods. 3/8" diameter body for secure clamping, with 5-1/2" overall reach. Bends in many direc-tions! Does not include indicator.

Made in the USAOrder No. 1233-1200 ............ $16.25

Specifications:1 dovetail fits all indicators1) 1/8 dia hole at an angle1) 1/8 hole inside dovetail1) 1/4 hole3) Pivot Points

ALL NEW HOLDERS FOR INDICATORS WITH DOVETAILS

RECTANGULAR BARSFor use with all height gages. All bars are manufac-tured from steel and black oxide plated.

Made in the USA "T" "H" "L" "P" Order Thick Height Length Pin Dia. Number Price 3/16" 5/16" 3" .220" 1233-1225 $14.25 5/16" 5/16" 4" .220" 1233-1230 14.25 1/4" 1/2" 3" .220" 1233-1235 14.25

L

H

T

ZERO SETModel Z9860MPerfect for Milling Machines, Magnetic Bases, and all Measuring set-ups.The ZeroSet fits all dovetail equipped indicators, and is used for checking Set Ups. Checks the align-ment of the centers round materials in relation to the cutting head. Speeds set up operations enormously. Eqipped with a spindle post with 1/4", 3/8" and 1/2" diameters, and has an effective measuring range of 3/8" thu 9".

Made in the USAOrder No. 1233-1240 ..................... $99.95

SPECIAL DIAL INDICATOR CONTACTSRoller Anvil - 3/8" Model Z9388Popular specialized contacts for Dial Indica-tors. Has 4-48 threads to fit all AGD Groups 1,2,3,4 Indicators.

Made in the USAOrder No. 1233-1245 ............. $15.00

REPLACEMENT TIPS FOR TEST INDICATORSMfg to fit Brown & SharpeLengths are approximate. Tips are manufactured to fit the specific indicator.M1.4 x 0.3 Threads

Steel Ball Tip Model Order Dia Length No. Number Price.040 1/2" Z6149 1233-1250 $5.50.080 1/2" Z6205 1233-1255 5.50.120 1/2" Z6295 1233-1260 5.50.080 1-7/16" Z6230 1233-1265 5.50

Carbide Ball Tip Model Order Dia Length No. Number Price.015 1/2" Z6594 1233-1270 $15.00.040 1/2" Z6595 1233-1275 8.50.080 1/2" Z6730 1233-1280 8.50.120 1/2" Z6905 1233-1285 8.50.080 11/16" Z6830 1233-1290 8.50.015 1-7/16" Z6644 1233-1295 15.00.040 1-7/16" Z6645 1233-1300 8.50.080 1-7/16" Z6802 1233-1305 8.50.120 1-7/16" Z6918 1233-1310 8.50Ruby Ball Tip Model Order Dia Length No. Number Price.2mm 1/2" Z6300 1233-1315 $16.75.2mm 1-7/16" Z6301 1233-1320 16.75

Indicator Accessories

REPLACEMENT TIPS FOR TEST INDICATORS Mfg to fit InterapidLengths are approximate. Tips are manufactured to fit the specific indicator.

Steel Ball Tip Model Order Dia Length No. Number Price.031 11/16" Z6105 1233-1325 $5.50.060 11/16" Z6200 1233-1330 5.50.080 11/16" Z6204 1233-1335 5.50.031 13/16" Z6106 1233-1340 5.50.060 13/16" Z6201 1233-1345 5.50.080 13/16" Z6225 1233-1350 5.50

Carbide Ball Tip Model Order Dia Length No. Number Price.031 11/16" Z6520 1233-1355 $8.50.060 11/16" Z6690 1233-1360 8.50.080 11/16" Z6738 1233-1365 8.50.031 13/16" Z6525 1233-1370 8.50.060 13/16" Z6692 1233-1375 8.50.080 13/16" Z6739 1233-1380 8.50

RubyBall Tip Model Order Dia Length No. Number Price.015 11/16" Z6510 1233-1385 $15.002mm 11/16" Z6305 1233-1390 16.75.093 11/16" Z6206 1233-1395 8.50.2mm 13/16" Z6306 1233-1400 16.75.031 1.450 Z6524 1233-1405 8.50.080 1.450 Z6809 1233-1410 8.50.031 1-3/4" Z6522 1233-1415 8.50.080 1-3/4" Z6742 1233-1420 8.50.2mm 1-3/4" Z6307 1233-1425 16.50.080 2-3/4" Z6879 1233-1430 8.50.100 2-3/4" Z6884 1233-1435 8.50

REPLACEMENT TIPS FOR TEST INDICATORSLengths are approximate. Tips are manufactured to fit the specific indicator.

Mfg to fit Starrett708, 708M, 709, 709M, SeriesModel Z6011 Starrett Tip 2mm carbide x 13/16" Lth. OEM # PT23914Order No. 1233-1495 ..............................$8.50

REPLACEMENT TIPS FOR TEST INDICATORSMfg to fit MitutoyoLengths are approximate. Tips are manufac-tured to fit the specific indicator. M1.7 x 0.35 Threads

Steel Ball Tip Model Order Dia Length No. Number Price.040 .700 Z6150 1233-1440 $5.50.080 .700 Z6215 1233-1445 5.50.120 .700 Z6400 1233-1450 5.50.040 1" Z6180 1233-1455 5.50.080 1" Z6223 1233-1460 5.50.120 1" Z6410 1233-1465 5.50.040 1-1/2" Z6190 1233-1470 5.50.080 1-1/2" Z6231 1233-1475 5.50.120 1-1/2" Z6420 1233-1480 5.50

Carbide .080 .700 Z6740 1233-1485 $8.50.080 1" Z6790 1233-1490 8.50

HOLDERS FOR INDICATORS WITH DOVETAILSA complete range of Dovetail Stems to fit all applications. Stem has srcew driver slot in bottom, and screws up through the dovetail to safely and securely clamp the Indicator.

Dovetail Dimension: .205 top to .220 bottom.Made in the USA5/32" Model Z7500 Order No. 1233-1205 ............. $10.001/4" Model Z7502 Order No. 1233-1210 ............. $10.00


PRECISION EQUIPMENT

E187

INDICATOR ACCESSORIESSwivel Clamp B&S 599-7045-13/8 & 7/32 diameter mounting holes. Dovetail opposite 3/8 hole. Included with all front-mounted dial BesTest Indicators.

Order No. 1330-0305 ...................$27.00Universal Swivel Clamp B&S 599-7055Dovetail opposite 3/8 mounting hole & V-side hole with clamp screw for range 1/8 thru 1/4.

Order No. 1330-0310 ...................$87.00Extensions with DovetailB&S 599-7053 .250" dia. x 1/2 long shank.

Order No. 1330-0325 ...................$16.20B&S 599-7052 .220" dia. x 1/2 long shank.

Order No. 1330-0320 ...................$16.20

Indicator Accessories

DOVETAIL BODY CLAMP

Model No. PT22429Order No. 1240-0895 ............ $17.50

Swivel ClampModel No. PT22428

Order No. 1240-0890 ..$17.50

Clamp SleeveModel No. PT22430Order No. 1240-0900 ............$21.50

Holding BarModel No. PT11770A

Order No. 1240-0905 ....$17.50

✰ Attachment Model 711EAFor models 711F, H. Inserts in place of end plug in indicator body, adapting these indicators to chucks of jig borers, millers, & other machine tools.

Order No. 1240-0955 ............$12.00

✰ Attachments for Last Word® Indicators are marked with a star & are furnished with Sets 711GCS & 711LCS

Contact PointsFor models 711 F,G,H,L. Model 711-16 Steel Contact Point furnished with these indicators. All three sizes also available with Tugsten Carbide ball contacts.

Regular Steel Model Ball Order Price No. Dia. Number Each PT07137 .035" 1240-0965 $6.20 PT07136 .062" 1240-0970 6.20 PT07087 .120" 1240-0975 5.60

Tungsten Steel 711F/G-16AX .035" 1240-0980 $26.00 711F/G-16BX .062" 1240-0985 28.50 711F/G-16X .120" 1240-0990 29.00

Carbide PT23914 ..078" 1240-0910 $25.50

Gooseneck Shank Model PT7107AFor models 711F,H. Replaces Universal Shank & Body Clamp, attaching directly to indicator body.

Order No. 1240-0960 ............ $17.50

Double Jointed AttachmentModel PT13301A universal attachment for holding indicator in jig borer.

Order No. 1240-0945 .....................$17.50

✰ Body Clamp CompleteModel PT07101FPermits indicator to be held by its body.

Order No. 1240-0950 .............$1 0.50

Model Ball Tip Length Order Price No. Type Dia. Inches Number EachFor use w/Indicators: 599-7021,7022,7023, 7024,7029,7030, 7031,7032, 7033, 7037 & 7038. 599-7030-15 Carbide .015" 1/2 1330-1520 $62.00 *599-7030-40 Carbide .040" 1/2 1330-1525 48.00 599-7050 Steel .040" 1/2 1330-1530 21.00 599-7030-80 Carbide .080" 1/2 1330-1535 51.00 599-7049 Steel .080" 1/2 1330-1540 21.00 599-7030-120 Chrome .120" 1/2 1330-1545 48.00 599-7051 Steel .120" 1/2 1330-1550 21.00For use with 599-7034 & 599-7035 BesTest Indicators *599-7034-40 Carbide .040" 1-7/16 1330-1555 $50.00 *599-7034-80 Carbide .080" 1-7/16 1330-1560 50.00 *599-7036-80 Steel .080" 1-7/16 1330-1565 48.00 *599-7034-120 Carbide .120" 1-7/16 1330-1570 50.00* While supplies last

BESTEST CONTACT POINTS

HEIGHT GAGE INDICATOR ATTACHMENT Model 711-351/8 x 5/16 x 1-7/8 shank. 1/4 x 3/4 pin. Stocked in Michigan store only. While Supplies Last.

Order No. 1240-2465

$8.50

CONTACT POINTSSet No. 25R. 14 points with #4-48 screw thread to fit AGD dial indicators; a regular 1/4" long point; 9 special form points; a No. 28 shock absorbing anvil; and 3 extra long points 1/2, 3/4, and 1" long. High grade steel, hardened, ground and chrome plated. All are mounted on a convenient aluminum ring for safe keeping and ready selection.

Order No. 1240-1740

$89.00


PRECISION EQUIPMENT

E188

INDICATOR HOLDER WITH CLAMP3" long, .351" square shank. Holds 3/8 stem and dovetail stand indicators.

Order No. 1276-0150 ............................. $6.95 Reg. $8.95

IndicatorAccessories

MAGNETIC INDICATOR BACKFits 2" diameter indicators. Magnet screws off.Order No. 1276-0005 .........................................$6.95

SPINDLE MOUNT INDICATOR HOLDERIndicate while workpiece is on machine. Impact resistant plastic. 3/8 Hole, 1-7/8" throat. Fits spindle of Bridgeport-type mills.

Order No. 1276-0135 .........................$ .27 Each or 8 for $1.10

DELUXE UNIVERSAL INDICATOR HOLDERDoes not disturb the working tool. Adapts immediately for fast and positive indicating. Mounts with pressure screw on machine quill. Stiffness is adjustable, and is not altered by pivoting joints.

Order No. 1276-0065 .................................. $16.45Reg. $21.00

UNIVERSAL DOVETAIL INDICATOR HOLDER

Easily held in a collet, chuck or height gage. 3" OAL, .250" shank diameter. Fits all test indicators with dovetails. Easily locks in each 90° quadrant. Mfg. from alloy steel.Order No. 1276-0080 ........................................ $11.35

SWIVEL JOINTSPrecision made column lock feature will not become loose when adjusting. Universal, will fit any make magnetic base, surface gage or indicators.

Size Order Price 5/16 x 1/4 1242-0005 $8.00 1/4 x 1/4 1242-0010 8.00 5/16 x 5/32 1242-0015 8.00 3/8 x 1/4 1242-0020 8.00 5/16 x 5/16 1242-0025 8.00 3/8 x 5/16 1242-0030 8.00 3/8 x 3/8 1242-0035 11.70 1/2 x 3/8 1242-0040 12.90

SWIVEL JOINTFor bases with 3/8 dia. post & indicators with 1/4 stem.

Order No. 1276-0155.69¢ or .50¢ each/5

HEIGHT GAGE BAR WITH UNIVERSAL CLAMPModel Z9627SETThis set is one of the most widely used for Height Gage measurment applications. Holds all instruments equipped with dovetails or 7/32" diameter pins. 1/4" x 1/2" x 3". 5/32 Diameter hole universal clamp.

Order No. 1233-1220 ............................ $26.75

DOUBLE JOINTED HOLDERModel Z9665Brass Setting Nut allows orientation of the indicator in a full 360°, with secure clamping. It also allows a fine adjust-ment for the indicator of .060 up and down. 3/8" Diameter body. 4-1/2" OAL. Fits all dovetail indicators.

Order No. 1233-1215 .......................... $26.70

INTERAPID® INDICATOR ACCESSORIES Order Price Description Number Each Model A 1/310 Height Gage Adaptor w/Clamp 1263-0020 $54.00 Clamp Only: 1263-0025 33.00 Bar Only: 1263-0030 23.00 Model A 90/310B Holding Bar w/Pin: 1263-0035 49.00 Bar Only: 1263-0040 48.00 Pin Only: 1263-0045 11.60 Model A 2/310B Axial Support: 1263-0050 59.00

CONTACT POINTS FOR INTERAPID® TEST INDICATORS Order Price Model No. Type Dia. Length Number Each 74.105996 Carbide .080" .687" 1263-0125 $18.70 74.105997 Carbide .060" .687" 1263-0130 18.70 74.105998 Carbide .031" .687" 1263-0135 18.70 74.106361* Carbide .080" 1.450" 1263-0140 24.00 74.106363* Carbide .031" 1.450" 1263-0145 24.00 74.107899 Chrome .080" .687" 1263-0150 9.90 74.107901 Chrome .060" .687" 1263-0155 9.90 74.107903 Chrome .031" .687" 1263-0160 9.90*Dial reading must be doubled to obtain correct reading.

MIGHTY MAG BASEUniversal magnetic base that will save time and improve accuracy. Strong magnet with 45 lbs. of holding power. Zinc die cast housing. Size 4-1/2 x 1" x 1-1/4. 5 Different locations for mounting accessories. 3 Positions 1/4-20 for lug mounts. One tapped hole 10-32. One reamed hole 3/8.WT Import Order No. 1276-0120 .......................................................... $6.55U.S.A. Made Order No. 1276-0095 ........................................................ $12.50


PRECISION EQUIPMENT

E189

Magnetic Bases

MINI-MAGNETIC BASEFlexible arm & fine adjustmentAccepts all indicators with 1/4 stems. 6" flexible arm, 6" high, powerful 1-1/2 diameter magnet.Order No. 1276-0145 .............$23.95

FLEXBAR TOM THUMB MINI MAGNETIC BASEModel 18009Ideal for tight work areas. Universal flexible arm locks into an extremely rigid position by turning knob. Supports up to 4 lb. load when fully tightened. Mounted pot mag. base is 1-1/8" dia. x 1-3/8" high, 25 lbs. pull with 5" post and fine adjustor.

Order No. 6609-0333 ....... $46.50

MITI-MITE PERMANENT MAGNETIC BASES

B&S With Fine Order Price Model Adjustment Number Each 599-7763 Yes 1330-0335 $84.50 599-7760 No 1330-0340 79.00 599-7761 Yes 1330-0345 84.50

Fine Adjustment Heavy Duty HolderBall & socket action takes all types of indicators. Channel in base allows use on round or flat surfaces. Fingertip release tilts unit for easy positioning. Base is approximately 4" long x 1-1/4 wide x 3/4 high. Height to top of post is 6-1/8. Supplied with one offset rod 6-1/4, for lug-backs having 1/4 hole and end diameter step, 5/16 diameter. Swivel clamp hole 1/4 diameter with 5/16 diameter post hole. While supplies last!B&S 599-7765 Order No. 1330-0350 ...................$144.00

B&S Models 599-7760 & 599-7761:Base dimensions are approximately 1-1/4 square x 1-3/4 high. Height to top of post is 5". Supplied with one each: 7/32 diameter x 1-1/2 long post; 7/32 diameter x 4-3/8 long post; 5/16 diameter x 1-1/2 long post.

B&S Model 599-7763:Base is approximately 1-1/4

square x 1-3/4 high. Height to top of post is approximately 5-1/2.

Stepped rod included is 4-1/2 long with steps of 7/32, 1/4 and 5/16.

MINI-MAGNETIC BASEBase: 1-1/8 dia. x 1-3/16 high. Clamps all indicators with 1/8 to 1/4 stem and dovetail style. Features fine adjuster for quick set-ups. Fits into tight areas. Overall height 5". Includes magnet neutralizing disc to cover magnet when not in use.

Order No. 1276-0040 ................................ $8.75Reg. $10.95

MINI MAGNETIC BASEFine Adjustment & 2 Universal Adjustments2 Universal swivels give you an infinite variety of positions. The fine adjustment for the accuracy you need. Base is 1-1/4 x 1-1/4 and 1-3/8 high. Adjusting mechanism is 4" long when extended. 3-1/2 x 1/4 indicator holding rod. Will accept any .250" diameter dovetail.

Order No. 1276-0115 .................$15.35

MAGNETIC STANDAccepts all AGD specified dial indicators and other indicators having 3/8 and/or lug back with 1/4 diameter hole. On-Off switch. Flexible stand approx. 15" long.Order No. 1276-0100 ............................$22.00

Reg. $34.00

Micro-Screw Fine Adjustor

Block5/8" Range

THE ORIGINAL UNIVERSAL MAGNETIC BASEModel 18028 with Fine AdjustmentInstant positioning, instant locking. For all AGD indicators, electronic sensors and lug backs. Completely flexible, lets you reach over, under, and around instantly. Eliminate rods, swivels, clamps and other hardware necessary to measure in obstructed areas. Top mounting clamp grips objects from .125" up to .510" diameter. Cable and swagged fittings are stainless aircraft and mil spec grade. Locked by tensioning of cable. Cam action locking. 16" Height, 65 lbs. magnet pull, with on/off switch.

Order No. 6609-0334

$82.50

MAGNETIC BASEINDICATOR HOLDERA rugged holder for indicators. Also use as lathe stops. Lug back indicators (not furnished) are mounted directly on unit with bolt and nut provided to give powerful compact unit. 3-1/2 x 1-1/2 x 1" high.

Order No. 1276-0060 .............. $10.45


PRECISION EQUIPMENT

E190

D) Model MG1033… Three-dimensional heavy duty holder with fine adjustment. On/Off Magnetic base 180LBF. Holds test and dial indicators

on 3/8" and dove tail. . Limited supply.

Order No. 1205-0425 ...............................................$118.75

A) Model NF1024… Three-dimensional small holder with Unique 360º fine adjustment on the base. Powerful On/Off miniature magnet 72LBF Central locking mechanism. Holds test and dial indicators on 3/8" and dove tail.

Order No. 1205-0400 .............................................. $113.00

E) Model NF1018… Test Indicator Holder with 8mm diameter x 40mm long stem, for centering workpieces. Holds test and dial indicators on 3/8" and dove tail.

Order No. 1205-0410 ...............................................$59.00F) Model DG1033… Three-dimensional standard holder with fine adjustment and central locking mechanism with NOGA designed spring-loaded bearing. On/Off Magnetic base 180 LBF. Holds test and dial indicators on 3/8" and dove tail. Limited supply.

Order No. 1205-0415 .............................................$107.50

C) Model DG 2033…Three-dimensional standard holder with the unique 2-speed mechanism fine adjustment and central locking mechanism with NOGA designed spring-loaded bearing. On/Off magnetic base 180LBF. Holds test and dial indicators on 3/8" and dove tail. . Limited supply.

Order No.1205-0420 ...............................................$110.95

LBF=Pounds of Force

A

B

C

DE

B) Model NF1033… Similar to NF1024 but with permanent magnetic base 63 LBF.

Order No.1205-0405 ............................................... $107.00

F

G

G) Model MG2033… Three-dimensional heavy duty holder with the unique 2-speed mechanism fine adjustment. On/Off Magnetic base 180LBF. Holds test and dial indicators on 3/8" and dove tail. . Limited supply.

Order No. 1205-0430 .............................................$122.95

Magnetic Bases

NOGA INDICATOR HOLDERS

GRANITE CHECKMicroscrew fingertip control. .00005" flatness. Extreme stability. Full 6" square, 8" column, 2" thick base. 8" Overall Height. Accepts all AGD indicators. With fine adjustment.

Order No. 1276-0050

$22.50Reg. $49.00

BLACK GRANITE SURFACE PLATE& DIAL COMPARATOR STAND!

ANYFORM MAGNETIC BASESMag Base w/fine adjust arms & clamps.The 70 steel segments easily conform to any shape or contour; and the magnet has a powerful 120 lbs. holding power, so that once the segments are locked the base is rigid. Cam lock mechanism easily loosens the segments for contour adjustment. Main post diameter is .470; clamping rod .390. Base thread 8 x 125mm. Without on/off Switch.

Order No. 1276-0075 ............$60.00

MAGNETIC BASESOn/off lever releases 132 lb. force permanent magnet. Accepts all AGD dial indicator hacks and stems. Accepts dial test indicator stems 3/8" diameter and 5/16" diameter universal adjustment; horizontal

and vertical.

Standard StyleOrder No. 1276-0010

$14.95w/Fine AdjustmentOrder No. 1276-0025

$15.95

Standard Style

SELF-LOCKING VACUUM BASEFeatures a 3-1/2" Powerful holding suction type base with on/off lever. Ideal for any smooth flat surface such as granite surface plates, glass, non-porous surfaces, etc. Comes complete with universal fine adjustment indicator clamp. 5/8" posts. 9" overall height.

Order No. 1276-0195

$59.95Reg. price $89.00

Fine Adjustment


PRECISION EQUIPMENT

E191

Magnetic Bases

HOLDING SYSTEMS

PH2040

PH4016

DG61003

DG10533

MG61003

MG10533

ARTICULATED FAT DG HOLDERDG61003Standard Holder with Fine Adjustment on the top.Fine adjustment on Top with universal swivel clamp.- Holds 6mm, 8mm, 3/8”, dovetail and back lug.- Unique central locking mechanism with Noga designed spring loaded bearing.- Dial gauge holder is 3 dimensional.- Powerful on/off magnetic base.- Instant fixation in any position.- Fast and easy to set up gauges into required position.- Black finished Arms. Length: Bottom Arm- 4.33” Top Arm- 3.98”

Order No. 1205-0421 ......................... $96.00

ARTICULATED FAB DG HOLDER USA Standard - DG10533Unique single direction Fine adjustment at base.- Powerful on/off magnetic base.- Holds 3/8” and dovetail.- Unique central locking mechanism with Noga designed spring loaded bearing.- Five axis holder.- Instant fixation in any position.- Easy to set up into required position.- Black finished Arms.

Order No. 1205-0422 ....................... $102.00

ARTICULATED FAT MG HOLDERMG61003New Fine adjustment on Top with universal swivel clamp.- Holds 6mm, 8mm, 3/8”, dovetail and back lug.- Unique central locking mechanism with Noga designed spring loaded bearing.- Dial gauge holder is 3 dimensional.- Most powerful on/off magnetic base.- Instant fixation in any position.- Fast and easy to set up gauges into required position.- Black finished Arms.

Order No. 1205-0431 ....................... $120.00

ARTICULATED FAB MG HOLDERUSA Standard - MG10533Unique single direction Fine adjustment at base.- Powerful on/off magnetic base.- Holds 3/8” and dovetail.- Unique central locking mechanism with Noga designed spring loaded bearing.- Five axis holder.- Instant fixation in any position.- Easy to set up into required position.- Black finished Arms.

Order No. 1205-0432 ....................... $129.00

ECONOMY MAG PH HOLDER Large - PH4016Improved single direction Fine adjustment at base.- Powerful on/off magnetic base.- Universal Swivel Clamp for all dial and test indicators.- Holds 6mm, 8mm, 3/8”, dovetail and back lug.- Strong arm lock by using the unique 3-point system.- Easy to set up gauges into required position

Order No. 1205-0445 ..........................$67.00

ECONOMY MAG PH HOLDERPH2040Improved single direction Fine adjustment at base.- Powerful on/off magnetic base.- Universal Swivel Clamp for all dial and test indicators.- Holds 6mm, 8mm, 3/8”, dovetail and back lug.- Strong arm lock by using the unique 3-point system.- Easy to set up gauges into required position

Order No. 1205-0440 ......................... $40.00

ARTICULATED FAT MA HOLDERMA61003New Fine adjustment on Top with universal swivel clamp.- Holds 6mm, 8mm, 3/8”, dovetail and back lug.- Unique central locking mechanism with Noga designed spring loaded bearing.- Dial gauge holder is 3 dimensional.- Most powerful on/off magnetic base.- Instant fixation in any position.- Fast and easy to set up gauges into required position.- Black finished Arms.

Order No. 1205-0433 ......................................................$190.00

MA61003


PRECISION EQUIPMENT

E192

Indicator not included

7010S

7011BNShown with indicator not included

Starrett w/Fine Order Price Model Adjustment Number Each 657T No 1240-1065 $190.00 657TW Yes 1240-1070 225.00

Model 7004Model 7008

Magnetic Bases

MAGNETIC STANDSModels 7010S & 7011BNAccepts all AGD-type dial indicators, test indicators and probes that have 3/8" diameter shank and/or lug back with 1/4" diameter mounting hole. The on/off switch offers instant mounting and dismounting without any adverse effects to the indicators or work surface. Pull: 132 lbs.

UNIVERSAL MAGNETIC STANDModel 7019Accepts all AGD .375" and 8mm stems. Accepts dial & test indicators. Permanent magnet with on/off switch. Pull: 132 lbs. Comes with collar.

Order No. 1275-0040 ........................ $199.00

Flex-O-Post has a vertical reach of 14-15/16 and horizontal reach of 9-3/4. The indicator snug can be rotated through 360° and locked in any position by a knurled thumb screw. Magnetic base is 1-15/16 high x 1-5/8 wide x 1-7/8 deep. Push button on-off switch. Black wrinkle finish on nonworking surfaces. Base has three precision ground magnetic contact surfaces. Sleeve attaches series 196 test indicator to 1/4" dia. gage rod.

FLEX-O-POSTINDICATOR HOLDER

Magnetic Base for use with all Dial Indicators

DIAL GAGE STANDSThese dial gage stands provide an ideal work base for all AGD type indicators as well as other gages with a .375" Dia. mounting stem.

Model 7004 - 4" Max. height capacity.Order No. 1275-0060 ............................................ $307.00Model 7008 - 3.54 Max height capacity.Order No. 1275-0065 ............................................ $304.00

6" Rod with Fine Adjustment & Universal Clamp

Model 7011BNOrder No. 1275-0010

$137.006" Rod & Universal Clamp

Model 7010SOrder No. 1275-0005

$120.00

HEAVY DUTY MAGNETICBASE INDICATOR HOLDERwith Rotary on/off Switch & Fine Adjust-ment for use with all AGD Dial IndicatorsThis gage has a powerful permanent magnetic base that attaches to flat or round surfaces. A stem clamp with 3/8" hole holds the indicator. A second tapped hole in one side for mounting the upright post horizontally or adding another post for multiple inspection work. Dimensions: base 2-3/8 x 2-3/8 x 3"; upright post 9-3/8 x 3/4 diameter; gage rod 9-3/8" x 3/4 diameter. Involute vee for accurate seating on round work up to 5" diameter. Includes threaded adaptor for using No. 657 posts and attachments.

MAGNETIC BASEINDICATOR HOLDER Model 657AAAUse with all AGD Dial Indicators, Miniature Dial Indicators and Starrett Dial Test Indicators. The magnetic base is 1-15/16 high x 1-5/8 wide x 1-7/8 deep. Push-button on/off switch for one hand operation. Black wrinkle finish on nonworking surfaces. Base has extra 1/4-20NC tapped hole in one side for mounting post and has three precision ground magnetic contact surfaces. Upright post is 3/8 diameter x 7-7/16 OAL. The rod is 1/4 diameter x 6" long. Indicator attachment is 1/4" OD one end, 1/4-20NC male threads opposite end, 3/8" OD shoulder between. Threaded end fits lug backs of all AGD indicators.

Order No. 1240-1060 ................... $136.00

Starrett Order Price Model Description Number Each 659A Upright post, swivel snug, gage rod, 1240-1727 $398.00 indicator clamp & threaded adaptor 659G Upright post only, less base 1240-1728 31.00 659H Swivel post, snug only 1240-1729 94.00 659P Mag base & threaded adaptor 1240-1730 159.00

MAGNETIC BASEINDICATOR HOLDER

Model 657APowerful permanent magnet base holds firmly to steel or iron surfaces — horizontally, vertically, upside-down. Push button ON/OFF switch. V-Step adapts base to horizontal or vertical arbors and chucks. Extra 1/4-20 tapped hole in side of base for indicator post. Three precision ground magnetic contact surfaces (plus V-step). Black wrinkle finish on nonworking surfaces.Order No. 1240-1732 ............................ $130.00


PRECISION EQUIPMENT

E193

UNIVERSALSURFACE GAGESwith 9" & 12" SpindlesBases have V-grooves for use on cylindrical as well as flat surfaces. Model 257B has four gage pins in base for linear work. Fine adjustment feature. Upper sleeve holds scribers and rods of various indicators.

Starrett Base Order Price Model Dimensions Base Finish Number Each 57B 2-15/16 x 2-9/16" Cast, black wrinkle 1240-1075 $132.00 257B 2-13/16 x 2-3/8" Hardened steel 1240-1735 162.00

57B

257B

HIGH POWER MAGNETIC ADAPTOR PLATETop & bottom surface magnetic. Makes your surface gage a magnetic base. Can be used as magnetic grinding chuck for precision operations. 2-1/2 Width x 7/8 Height x 3-1/2 Length. Top & bottom parallel within .001".

Order No. 1971-0005 ...$16.00

SURFACE GAGESHardened and ground steel bases, bottoms grooved for cylindrical work. Front recessed for depressing spindle below base line. Spindle arm and scribes are adjustable and securely lock into position to any angle. Includes scriber point and two spindles.

4" & 7" SpindlesOrder No. 1248-0005 ......$18.009" & 12" SpindlesOrder No. 1248-0011 ......$19.95

Surface Plates & Gages

PRECISION BLACK GRANITE SURFACE PLATESMeets Federal Specs GGG-P-463-C Grade B, 0-Ledge

Bilateral Weight Order Price Size ± Accuracy Thick. (lbs.) Number Each 9" x 12" .0001" 2" 40 1312-0001 $16.00 9" x 12" .0001" 3" 50 1312-0006 22.00 12" x 12" .0001" 3" 37 1312-0003 25.00 12" x 18" .0001" 3" 75 1312-0005 37.00 18" x 24" .00015" 3" 153 1312-0020 72.00 24" x 36" .0002" 4" 365 1312-0035 175.00 36" x 48" .0004" 6" 740 1312-0045 455.00

SURFACE PLATE STANDSHeavy bolted angle iron with leveling screws. Weight Order Price Size (lbs.) Number Each 18" x 24" 95 1312-0250 $99.00 24" x 36" 118 1312-0255 140.00

PLATE & STAND SETSSave 20% when you purchase the Set!18" x 24" 250 lbs.Order No. 1312-9960 ........................ $136.0024" x 36" 485 lbs. Order No. 1312-9980 ........................$250.00

SURFACE PLATE COVERSThese covers fit snugly over the top of standard size Starrett surface plates, protecting from abrasive dust. Made of a strong vinyl material with a soft cloth lining, the covers are recommended whenever surface plates are not in use.

Order Price Size Number Each 12 x 18 1240-0525 $44.80 18 x 18 1240-0530 61.60 18 x 24 1240-0535 63.85 24 x 24 1240-0540 68.30 24 x 36 1240-0545 76.15 36 x 36 1240-0555 95.20 36 x 48 1240-0560 97.50 36 x 60 1240-0565 112.00 36 x 72 1240-0570 122.00 48 x 72 1240-0575 143.35 48 x 96 1240-0580 166.85

Order PriceSize Number EachPint-spray top 1233-1180 $4.90Quart 1233-1185 7.20Gallon 1233-1190 13.705 Gallon 1233-1195 51.00

SURFACE PLATE CLEANERPrecision sur face plate cleaner works quickly and effective-ly. Leaves no residue on the granite

NEW! GRANITE SURFACE PLATE/COMPARATOR STANDGrade A (.00005 Accuracy)Predilled hole (1" from center to the edge). Can be used as comparator stand (attachments not included)

12” L x 8” W. 2” Thickness. .404 Dia. hole.Order No. 1312-0080 ............................................$16.0018” L x 12” W. 4” Thickness. .390 Dia. hole.Order No. 1312-0085 ............................................$37.00


PRECISION EQUIPMENT

E194

Bore & Height Gages

.0001" with 2923SB-10 Dial Indicator MTI Bore No. No. Order Price Range Model Depth Anvils Spacers Number Each .3-.4" 526-122 1.25 6 — 1283-0005 $449.00 .4-.7" 526-123 2.4 8 — 1283-0010 415.00 .7-1.4" 511-163* 4 8 3 1283-0015 356.00 1.4-2.5" 511-164* 6 6 4 1283-0020 348.00 2.0-6.0" 511-166* 6 11 4 1283-0025 380.00 4.0-6.5" 511-187 6 13 4 1283-0030 502.00 6.5-10.0" 511-188 10 6 6 1283-0035 565.00 10.0-16.0" 511-189 10 5 6 1283-0040 673.00*With Round Guide.0005" with 2922SB Dial Indicator MTI Bore No. No. Order Price Range Model Depth Anvils Spacers Number Each .3-.4" 526-119 1.25 6 — 1283-0045 $400.00 .4-.7" 526-120 2.4 8 — 1283-0050 363.00 .7-1.4" 511-159* 4 8 3 1283-0055 308.00 1.4-2.5" 511-160* 6 6 4 1283-0060 308.00 2.0-6.0" 511-162 6 11 4 1283-0065 341.00 4.0-6.5" 511-184 6 13 4 1283-0070 452.00 6.5-10.0" 511-185 10 6 6 1283-0075 513.00 10.0-16.0" 511-186 10 5 6 1283-0080 623.00*With Round Guide

SELF-CENTERING BORE GAGESSeries 526 & 511

Come equipped with self centering devices with 2 or 3 points. Two point self-centering small bore gage has two carbide contact points. All gages are furnished with dial-protector cover, carrying case and all the necessary parts.

TESA VERIBOR LIGHT BORE GAGEPerform 2-point measurements on bores from .70" to 5.90" using the VERIOBOR Light. Detect form and shape deviations. Virtually clearance free circular articulation ensures high repeatability. Invar stall prevents hand warmth transfer from affecting the measured result. Centering shoe assures the correct alignment of the gage into the bore being inspected. Hardened steel ball tips offer high resistance to wear.

Model No. Range Order No. Price05790090 0.70"-1.4" 1330-2100 $415.0005790091 1.4"-2.5" 1330-2105 405.0005790092 2.00"-6.00" 1330-2110 466.0005790093* 0.70"-6.00" 1330-2115 791.00*Dial indicator sold separately

05790090

05790092

05790091

05790093

SELF-CENTERING DIAL BORE GAGESwith .0005" Dial IndicatorGages come equipped with self-centering devices and two or three points. Jeweled dial gages with revolution counters, 2-1/4 diameter. Complete with fitted wooden box.

Bore Order Reg. Price Range Depth Number Price Each *1.4-2" 6" 1235-0005 $79.00 $59.00 1.4-2.4" 6” 1235-0004 84.00 59.00 2-4" 6" 1235-0010 89.00 59.00 2-6" 6" 1235-0016 89.00 71.20 6-10" 10” 1235-0021 99.00 69.00 *6.5-10" 10" 1235-0020 91.00 49.00 10-16" 16" 1235-0025 110.00 67.00*While supplies last

DIGITAL HEIGHT GAGE with Absolute EncoderWith ease of operation of paramount importance, stable measuring accuracy, and a variety of functions, Mitutoyo Digimatic height gages have become the standard gage for height measuring instruments. In addition to new features, including an absolute ABS encoder for direct measurement from power on, and easy-to-read large LCD display, an economical energy-saving power design supports extended hours of continued operation. .0005"/0.01mm Resolution. Versatile digital functions include: Zero-setting, presetting, ABS/ONC measurement mode switching, data hold, count direction switching, inch/mm conversion, & data output. Data output port for connection with SPC system. Specifications: Display LCD, 6 digits and minus (-) sign. Maximum response speed: Unlimited. Repeatability: .0005" (0.01mm). Quantizing error: ± 1 count. Battery: silver oxide cell (SR44) x 1 pc. (part no. 541980). Battery life: 5,000 hours of continual use. (The low voltage battery alarm function works if the battery needs replacing.) Operation temperature: 0° C to 40° C. Storage temperature: -10° C to 60° C.

Range MTI Res. & Grad. Order Price in/mm No. in./mm Accuracy Number Each 0-12"/300 570-312 .0005"/0.01 ±.002" 1259-0120 $544.00 0-18"/450 570-313 .0005"/0.01 ±.002" 1259-0125 763.00 0-24"/600 570-314 .0005"/0.01 ±.002" 1259-0135 983.00

For SPC Output Connecting Cables:Model 905338 (1m) Order No. 1259-0145 ................ $35.25Model 905409 (2m) Order No. 1259-0150 ................ $42.00


PRECISION EQUIPMENT

E195

12" DIAL HEIGHT GAGEwith Fine Adjustment

.001" Graduation. .100" dial revolution. Adjustable dial for easy zero setting. Made of hardened stainless steel with black bar graduations on a satin chrome finish. Comes with carbide tipped scribe, clamp and wooden case.

Order No. 1269-0005

$72.00Reg. $89.00

12" DIGITAL ELECTRONIC HEIGHT GAGE

Display functions include: ON-OFF, positive pre-set, negative pre-set, INCH/MM, zero ABS, and reset buttons. Resolutions: .0005"/.01mm. Max. measuring speed: 60”/s. Includes: data output port, carbide tipped scriber and SR44 battery.

Order No. 1269-0100

$182.95Reg. $249.00

DUAL READING HEIGHT GAGE

Dial & Digital, .001" GraduationThe combination of large dial indicator and error-proof digital counter makes this unique height gage easy to read. The double digital counter (up/down) can be separately set to zero at any height. Dial range 0-100 in either direction. Comes with a carbide scriber, double chrome beams and locking clamp. Featuring wheel feed for upward or downward movement. Large diameter dial makes precision movement easy.

12" Range Order No. 1269-0040 ..........................$109.00Reg. $139.00



Height Gages

DELUXE HEIGHT GAGESBeam and measuring slide made of hardened stainless steel. Carbide-tipped scriber. Measuring faces and guideways precision ground and micro-lopped for accuracy. Fine adjustment slide. Magnifier cursor on all models. Vernier reads inch and metric to 1/1000" x .02mm. Adjustable sliding scale. Includes: Fine adjustment sliding scale. Fine adjustment clamp screw. Slide clamp screw. Clamp screw. Carbide scriber. Two vernier scales.

12"/300mm Order No. 1269-0025 ................. $62.95Reg. $69.00

18"/450mm Order No. 1269-0030 ................. $79.95Reg. $144.00

24"/600mm Order No. 1269-0035 ............... $125.95Reg. $179.00

SpecificationsResolution .0005" (0.01mm)Graduations .110" (5mm)Overall ±.0015" (.04mm) 0-18" (0-450mm)Accuracy ±.002" (.05mm) 18-24" (450-600mm)Battery Life Over 1-1/2 Years Average Use

HEIGHT GAGESNo. 3752 SeriesReadability and Control Features Clear bar graduations in .100" and 5mm in-crements. Large (.380”/9.65mm), easy-to-read LCD display read to .0005" and .01mm. Instant inch-millimeter conversion. Carrier and scriber designated to read from zero. “Hold” control feature retains a reading at any position. Plus or minus indication allows reading in proper direction. Abililty to set ZERO at any position. Manual on/off plus a built-in automatic off af-ter 30 minutes of nonuse.Full Function Action Features Large positive action keypad. Ability to retain and return to the true zero reading of the height gage. PRESET button to install any reading at any position. Ability to install minimum and maximum limits. Output jack allows data trans-mission either through a cable or by connecting to a Starrett DataSure™ Wireless Data Collec-tion System end node. The output jack allows data transmission to the following peripherals for analysis, data collection and hard copy documentation.

Gages Model No. Order No. Price0-12" (300mm) 3752-12/300 1240-3752 $705.000-24" (600mm) 3752-24/600 1240-3753 1,155.00

Cases Model No. Order No. PriceWood case for 12" 928 1240-3754 $185.00Wood case for 24" 945 1240-3755 205.00


PRECISION EQUIPMENT

E196

SQUARE SETS are: • Fully hardened• Chrome finished blades• Double indexed protractor graduated 180° • Baked enamel finish• Square heads have level & scriber points• USA-Made sets have fully hardened square head, center head, protractor• Choose from USA made or WT Import

WT Import USA-Made Blade Order Price Order Price Lgth. Grad. Number Each Number Each 12" 4R 1279-0006 $44.95 1322-0020 $111.50 12" 16R 1279-0008 55.95 1322-0021 111.50 12" E/M — — 1322-0046 113.35 18" 4R 1279-0015 63.95 1322-0035 128.35 18" 16R 1279-0020 63.95 1322-0045 130.60 18" E/M 1279-0030 63.95 1322-0047 128.35 24" 4R 1279-0035 66.95 1322-0050 136.60 24" 16R 1279-0040 66.95 1322-0055 138.25 24" E/M 1279-0050 66.95 1322-0058 136.50

4 PC. SQUARE HEAD, CENTER HEAD,

PROTRACTOR & BLADE SETS

2 PC. SQUARE HEAD & BLADE SETS

WT Import USA-Made Blade Order Price Order Price Lgth. Grad. Number Each Number Each 12" 4R 1319-0005 $20.95 1322-0051 $51.50 12" 16R 1319-0015 20.95 1322-0056 51.95 12" E/M 1319-0016 20.95 1322-0057 51.50 18" 4R 1319-0019 27.95 1322-0060 63.10 18" 5R 1319-0020 27.95 — — 18" 16R 1319-0021 27.95 1322-0065 69.10 18" E/M 1319-0035 27.95 1322-0067 63.10 24" 4R 1319-0025 30.50 1322-0070 73.55 24" 16R 1319-0030 30.50 1322-0075 78.10

COMBINATION SQUARE BLADESUSA blades are made of the finest quality steel, hardened and tempered with satin chrome finish. Available in various graduations, precisely etched, then black filled for readability. Meets Federal Specifications. WT brand blades are hardened & tempered chrome clad.

WT Import USA-Made Blade Order Price Order Price Lgth. Grad. Number Each Number Each 12" 4R 1317-0005 $ 10.95 1322-0100 $23.50 12" 16R 1317-0015 10.95 1322-0110 26.30 12" E/M 1317-0035 10.95 1322-0205 23.50 18" 4R 1317-0017 19.95 1322-0115 35.25 18" 5R — — *1322-0120 23.85 18" 16R 1317-0021 19.95 1322-0125 37.80 18" E/M 1317-0040 19.95 1322-0210 35.25 24" 4R 1317-0025 23.50 1322-0130 45.85 24" 16R 1317-0030 23.50 1322-0135 49.35 24" E/M 1317-0045 23.50 1322-0215 45.85

PROFESSIONAL COMBINATION SQUARES-HEAVY DUTYUse for making 90° & 45° markings, measuring, and checking depth. 12" stainless steel blade on both models. 1/8", 1/16" & 1/32" graduations on Model 250. Metric graduations on Model 250M. Machined square had. Full view dial. Self aligning draw bolt. Hardened draw bolt.

Model e250 - Inch graduations Order No. 1302-1500 ......................................... $12.95Model e250M - Metric graduations Order No. 1302-1505 ......................................... $12.95

Combination Squares

ETCHED STAINLESS STEEL

COMBINATION SQUARES

With True Blue® VialModel e280 - 16" Professional Order No. 1302-1510 ......................................... $14.50Model e255 - 6" Pocket Order No. 1302-1515 ......................................... $10.75

Lifetime Warranty

WT Import USA-Made Order Price Order Price Type Number Each Number Each Square Head 1321-0005 $15.50 1322-0080 $29.70 Center Head 1321-0010 10.95 1322-0085 23.50 Protractor 1321-0015 24.95 1322-0090 34.85

Clamp & Screw AssemblyOrder No. 1322-0200 .. $3.50

HEADS ONLYFits 12", 18" and 24" Blades

COMBINATION SQUARE SETSChrome Clad Rules with Hardened Cast Iron Heads

MTI Pcs. in Order Price Model Set Description Number Each 180-901 3 6" 4R Rule, Square Head, 1278-0002 $106.00 & Center Head 180-902 3 6" 16R Rule, Square Head, 1278-0003 107.00 & Center Head 180-903 3 12" 4R Rule, Square Head, 1278-0005 131.00 & Center Head 180-904 3 12" 16R Rule, Square Head, 1278-0007 135.00 & Center Head 180-905 4 12" 4R Rule, Square Head, 1278-0010 206.00 Center Head & Rev. Protractor 180-906 4 12" 16R Rule, Square Head, 1278-0012 209.00 Center Head & Rev. Protractor

Blades Only: MTI Blade Order Price Model Lgth. Graduations Type Number Each 180-401 6" 8ths, 16ths, 32nds, 64ths 4R 1278-0015 $32.05 180-402 6" 32nds, 64ths, 50ths, 100ths 16R 1278-0020 36.30 180-501 12" 8ths, 16ths, 32nds, 64ths 4R 1278-0025 38.45 180-502 12" 32nds, 64ths, 50ths, 100ths 16R 1278-0030 41.65 180-701 18" 8ths ,16ths, 32nds, 64ths 4R 1278-0035 69.85 180-702 18" 32nds, 64ths, 50ths, 100ths 16R 1278-0040 72.55 180-601 24" 8ths, 16ths, 32nds, 64ths 4R 1278-0045 80.50 180-602 24" 32nds, 64ths, 50ths, 100ths 16R 1278-0050 84.30

Hardened Cast Iron Heads: MTI For These Order Price Mode Description Models Number Each 180-101 Square Head 6" 1278-0055 $42.00 180-102 Square Head 12"-24" 1278-0060 50.25 180-201 Center Head 6" 1278-0065 36.35 180-202 Center Head 12"-24" 1278-0070 42.50 180-301 Protractor Head (Not Hardened) 12"-24" 1278-0075 76.65


PRECISION EQUIPMENT

E197

Protractor Head

SquareForged and hardened, smooth

black enamel finish. Order Price Model No. Number Each H33-1224 1240-1355 $61.00

Center C33-1224 1240-1360 $53.00

Protractor Satin chrome smooth finish.

CPR1224W 1240-1365 $90.00

Center Head

HEADS ONLYFor Combination Squares

Square Head

Order Price Model No. Length Grad. Number Each CB12-4R 12" 4R 1240-1315 $ 39.50 CB12-16R 12" 16R 1240-1320 55.00 CB18-4R 18" 4R 1240-1325 77.00 CB18-16R 18" 16R 1240-1330 88.00 CB24-4R 24" 4R 1240-1335 95.00 CB24-16R 24" 16R 1240-1340 107.00 CB36-4R 36" 4R 1240-1345 250.00 CB36-16R 36" 16R 1240-1350 266.00

BLADES ONLYFor Combination Squares • Satin Chrome

The blades listed below are all 1" wide and approximately 3/32" thick.

Order Price Model No. Size Blade Graduation Number Each 11H-12-4R 12" Regular 4R 1240-1260 $65.00 C11H-12-4R 12" Satin Chrome 4R 1240-1265 78.00 11H-12-16R 12" Regular 16R 1240-1270 88.00 C11H-12-16R 12" Satin Chrome 16R 1240-1275 95.00

2 PC. COMBINATION SQUARE SETSwith Square Head Only

2 PC. SQUARE SETS6" Blade with Square Head Only Model Order Price Number Graduation Number Each 33JH-6-4R 4R 1240-1240 $70.00 33JH-6-16R 16R 1240-1245 78.00

3 PC. SQUARE SETS6" Blade with Square Head and Center Head Model Order Price Number Graduation Number Each 33JHC-6-4R 4R 1240-1250 $117.00 33JHC-6-16R 16R 1240-1255 124.00

6" COMBINATION SQUARESWidely used by mechanics, toolmakers and pattern makers because of the compact, small size and light weight. These Combination Squares Heads are drop forged, hardened and have smooth black enamel finish.

Cast HeadsBlack wrinkle finish Order Price Model No. Size Grad. Number Each 435-12-4R 12" 4R 1240-1295 $192.00 435-12-16R 12" 16R 1240-1300 198.00

Forged & Hardened Square & Center HeadsSmooth black enamel finish, satin chrome blade Model Order Price Number Size Grad. Number Each C434-12-4R 12" 4R 1240-1305 $244.00 C434-12-16R 12" 16R 1240-1310 256.00

Square Head, Center Head & Reversible Protractor HeadWith reversible lock bolts, spirit level in both square head and protractor head, direct reading double 180 degree protractor scale, tempered steel machine divided blade.

Cast HeadsBlack wrinkle finish Order Price Model No. Size Blade Grad. Number Each 9-12-4R 12" Regular 4R 1240-1280 $175.00 C9-12-4R 12" Satin Chrome 4R 1240-1285 195.00 9-12-16R 12" Regular 16R 1240-1290 190.00 9ME-300 300mm Regular 16R 1240-1890 180.00

Square Head, Center Head & Non-Reversible Protractor Head

With reversible lock bolts, spirit level in both square head and protractor head, direct reading double 180 degree protractor scale, tempered steel machine divided blade.

4 PC. COMBINATION SQUARE SETS

GRADUATION CHART4R – 8ths, 16ths, Quick Reading 32nds, 64ths.

16R – Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths.

Reversible lock bolt, spirit level & tempered steel machine divided blade. Regular or satin chrome finish. Graduated in 8ths, 16ths, 32nds, & 64ths.

Combination Squares


PRECISION EQUIPMENT

E198

Starrett Blade Beam Order Price Model Lgth. Lgth. Number Each 20-1-1/2 1-1/2 1-1/2 1240-1495 $133.00 20-3 3" 2-3/8 1240-1500 142.00 20-4-1/2 4-1/2 3-1/2 1240-1505 171.00 20-6 6" 4-5/16 1240-1510 227.00 20-12 12" 7" 1240-1515 453.00 20-24 24" 12-5/16 1240-1525 1,163.00 20-36 36" 20" 1240-1530 2,903.00

HARDENED STEEL SQUARESSeries 20 Cases AvailableUse where extreme accuracy is required. Beams and blades are hardened, ground and lapped for parallelism and straightness. Beam is grooved at inner corner for clearance of burrs or dirt. Made of high quality tool steel. Finest craftsmanship throughout.

DIEMAKER'S SQUARE

With Angular AdjustmentFor measuring die clearances, checking angles and drafts on patterns. Beam is graduated to show the setting in degrees. Blades can be set for any angle

up to 10°, either side of 0° and the angle is indicated by the line on the pointer. Blade has 32nds on one side, 64ths on the other. 5/32 wide x 1-5/8 long, and cut away at one end to a width of 3/32". Offset blade protrudes from the square about 1-1/2" and is 1/8" wide with beveled edges. Beam is beveled adjacent to the blade for better visibility. Blades and beams are hardened and ground. Starrett Order Price Description Model Number Each With Straight Blade Only 457A 1240-2480 $157.00 With Straight & Offset Blades 457C 1240-2485 204.00

HARDENED BEVEL EDGE SQUARESSeries 55 Cases Available Starrett Blade Beam Order Price Model Lgth. Lgth. Number Each 55-1-1/2 1-1/2 1-1/2 1240-1535 $164.00 55-3 3" 2-3/8 1240-1540 180.00 55-4-1/2 4-1/2 3-1/2 1240-1545 223.00 55-6 6" 4-5/16 1240-1550 257.00

Squares

WORKSHOP SQUARE SETWith Fitted Molded CaseHardened and ground steel blades. Square within .0006". Machined notch at inner corner provides clearance for burrs.

3 Pc. Set Model 599-540-246Order No. 1330-1710 ..................................................... $71.504 Pc. Set Model 599-540-2346Order No. 1330-1715 ..................................................... $89.50

Blade Beam Size Size 2" 1-1/2" 3" 2-1/2" 4" 3" 6" 4"

Blade Beam Size Size 2" 1-1/2" 3" 2-1/2" 4" 3" 6" 4"

WORKSHOP SOLID SQUARE SETHigh quality tool steel. True right angles inside & out. Beams & blades precision ground. Blade is hardened.3 Pc. Set Model 7000-S3 2", 4", 6"Order No. 1301-0046 ........................................................$34.954 Pc. Set Model 7000-S4 2", 3, 4", 6"Order No. 1301-0047 ........................................................$36.95

3 PC. 6" MINI COMBINATION SQUARE SETIncludes: Square head, Center Head, 6" 4 R (8,16,32,64,gradu-ations), Satin Chrome Finish. Fitted Case.

Order No. 1279-0100

$24.95

DIE MAKER'SSQUARE SET

Use on precise miniature layouts. Set consists of 3 hardened beveled edge squares: 3/4, 1-1/4, & 2-3/8 plus a 1-1/2 triangular straight edge with removable handle. Beam is grooved at inner corner for clearance of burrs & dirt.

Order No. 1303-9980

$52.00

All measuring surfaces are hardened to 55 HRC and precision ground. Length of blade is measured from inner edge of beam to end of blade. Includes 3 squares: (1) 3-1/8” Blade x 2” beam, (1) 5” blade x 3” beam, and (1) 8-1/2” blade x 5-1/8” beam.Order No. 1301-9980 ...................... $59.95

3 PC.HARDENED STEEL

SQUARE SETStraight Edge

Model 2-428-100

L = Length of blade outer edge a = linear tolerance of squareness

Class II:a = .00080” +L 1000


PRECISION EQUIPMENT

E199

CENTER SQUARESMade from ground tool steel. Hardened and tempered blade. Useful square for rapid location of round bar or disc center. Place the round bar between the center square. Center of scribed lines will be the accurate center of the workpiece.

1-1/2" Order No. 1289-0335 ................................... $8.953" Order No. 1289-0340 ....................................... $15.75

Ideal for precision layout work. Blades are hardened and tempered. Micro-fine blade graduation, satin chrome finished for easy reading. Can be used as a parallel or as a double square.

Blade Order Price Lgth. Graduation Number Each 4" 4R Blade Set 1322-0010 $22.50 4" 16R Blade Set 1323-0015 25.85 6" 4R Blade Set 1322-0005 26.50 6" 16R Blade Set 1323-0005 26.50

Outside Dims. Inside Dims. Order Reg. Price Blade Beam Blade Beam Number Price Each 2-1/2 1-1/2 1-7/8 15/16 1301-0025 $16.99 $12.95 3-1/8 2" 2-7/16 1-1/4 1301-0030 19.95 14.95 4-7/8 3-1/8 3-15/16 2-3/16 1301-0035 28.50 17.95 6-1/4 3-15/16 5-1/8 2-3/4 1301-0040 37.00 21.50 7-7/8 4-15/16 6-11/16 3-3/4 1301-0045 49.95 37.00

4 R 16 R Price Length Order No. Order No. Each 6" 1324-0005 1326-0005 $12.10 12" 1324-0010 1326-0010 17.35 18" 1324-0015 1326-0015 24.10 24" 1324-0020 1326-0020 31.00

Model Blade Beam Order Price No. Lgth. Lgth. Number Each S2 2" 1-3/4 1301-0003 $3.95 S4 4" 3" 1301-0005 4.95 S6 6" 4" 1301-0010 8.95 S8 8" 6" 1301-0015 11.95 S12 12" 8" 1301-0020 19.95 4 Pc. Set… 2"-8" 1301-9960 19.95

STANDARD MACHINIST'S STEEL SQUAREMade of the finest hardened Sheffield steel. Designed for precision layout and measurement work. Squares are true right angles, both inside & outside. Beams and blades are ground and lapped for parallelism. Length of blade is measured from corner edge of beam to end of blades. Blade is hardened.

HARDENED BEVEL EDGESTEEL SQUARESAccuracy .00008" + L/100,000Squares have accurate right angles both inside & outside. Made from single piece of fully seasoned tool steel. Beams and blades are ground and lapped for parallelism. Accuracy class H. Blades are beveled on both edges of each side. Beam is grooved at inner corner for clearance of burrs & dirt. Squares are hardened (Rockwell 55).

Squares

DOUBLE HEAD SQUARE SETS

SPRING TEMPERED STEEL RULES Satin Chrome Model Order Price Length Width Number Grad. Number Each 6" 3/4 C604R-6 4R 1240-1425 $19.50 *6" 3/4 C604RE-6 4R 1240-1430 21.00 6" 3/4 C616R-6 16R 1240-1435 23.00 12" 1" C604R-12 4R 1240-1440 32.50 12" 1" C616R-12 16R 1240-1445 44.00 18" 1-1/8 C604R-18 4R 1240-1450 63.00 24" 1-1/4 C604R-24 4R 1240-1455 81.00 36" 1-1/4 C604R-36 4R 1240-1460 149.00 48" 1-1/4 C604R-48 4R 1240-1465 195.00*End Grad. in 32nds both ends one side.

STEEL RULESwith Graduations in Shrink Measure

Spring Tempered Steel • Satin Chrome Finish

Model Shrink Shrink Order Price Length No. Per Ft. Grad. Width Thick. Number Each 12" C100A-12 1/16 No. 6R 1" 3/64 1240-2020 $72.00 12" C100F-12 3/16 No. 6R 1" 3/64 1240-2025 72.00 24" C100A-24 1/16 No. 6R 1-1/4 3/64 1240-2030 157.00 24" C100F-24 3/16 No. 6R 1-1/4 3/64 1240-2035 157.00

Shrink rules are for laying out wood and metal patterns and core boxes for casting metals. Graduated to give shrink allowances directly, they come in 12" and 24" lengths. In using them, it should be remembered that the size and shape of castings must be considered since thick castings have less shrink and thin castings more shrink than the figures given.

Average Shrinkage of Casings:Cast Iron ......................... 1/8 per ft.Malleable Iron ................. 1/8 per ft.Steel ............................... 1/4 per ft.Brass ............................ 3/16 per ft.Copper .......................... 3/16 per ft.Aluminum ...................... 3/16 per ft.Lead.............................. 5/16 per ft.Zinc ............................... 5/16 per ft.Britannia ....................... 1/32 per ft.Tin Alloys ...................... 1/12 per ft.

GRADUATION CHART3R — Quick Reading 10ths, Aircraft Quick Reading 50ths, 32nds, 64ths.4 R — 8 t h s , 1 6 t h s , Q u i c k R e a d i n g 3 2 n d s , 6 4 t h s .5R — Quick Reading 10ths, Aircraft Quick Reading 100ths, 32nds, 64ths.6R — Aircraft Quick Reading 50ths (.02) both edges one side, Quick Reading 10ths (.10) both edges opposite side.16R — Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths.

METRIC STEEL RULE Model C334-150 Satin Chrome Width Order Price Length (approx.) Graduation Number Each 150mm 12.7mm mm and 1/2mm one side; 1240-1470 $21.50 quick reading 10ths (.10) and aircraft quick reading 50ths (.02) on reverse.

FULL FLEXIBLE STEEL RULES Satin Chrome Model Order Price Length Width Number Grad. Number Each 6" 1/2 C303R-6 3R 1240-1370 $18.00 6" 1/2 C305R-6 5R 1240-0015 19.50 6" 1/2 C316R-6 16R 1240-1380 20.00 12" 1/2 C305R-12 5R 1240-1385 39.00 12" 1/2 C316R-12 16R 1240-1390 41.00 18" 3/4 C305R-18 5R 1240-1395 61.00 18" 3/4 C316R-18 16R 1240-1400 68.00 24" 3/4 C305R-24 5R 1240-1405 86.00 24" 3/4 C316R-24 16R 1240-1410 95.00 36" 3/4 C305R-36 5R 1240-1415 170.00 36" 3/4 C316R-36 16R 1240-1420 171.00

ADJUSTABLE,DOUBLE HOOK RULESStainless Steel, Chrome Clad


PRECISION EQUIPMENT

E200

OVER-RUN SPECIALS!

DOUBLE SQUARE4" Hardened BladeGraduated in 8ths, 16ths, 32nds, & 64ths. The sliding blade is adjustable over a common square with fixed blade. The face of the head is ground square. The beveled blade has an octagon angle at one end and hexagon angle at the other end, clearly marked

Model 13A Order No.1240-2200 ..............................$54.00

RULE CASES WITH CLIPA leather-like case with pocket clip for 6 inch steel rules. Rounded metal-bound edges prevent pocket from becoming worn and torn by rule corners. Model Order Price Number Description Number Each 1612 For 1/2" wide 6" Rules 1240-1475 $4.95 1634 For 3/4 wide 6" Rules 1240-1480 5.10

ADJUSTABLE STEEL HOOK RULESSpring Tempered Steel

This improved Hook Rule features an adjustable double hook that can be shortened or extended on either side in relation to one of any four graduations on the rule. Makes possible accurate measurements from shallow or deep shoulders and also permits setting calipers to any of the graduations. Hooks are hardened and may be adjusted or removed entirely by a slight turn of the eccentric stud. Sizes up to 144" available.Model DH604R-6: 6"/4R Order No. 1240-2440 ...........$22.50Model DH604R-12: 12"/4R Order No. 1240-2450 ...........$40.00

Rules

STEEL STRAIGHT EDGESStraight edges are precision made of fine tool steel to rigid Starrett standards. Ground all over and finely finished. These straight edges are unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Beveled one edge only, not graduated. Starrett Order Price Size Width Thickness Model Number Each 12" 1-13/32 11/64 385-12 1240-0035 $54.00 18" 1-13/32 11/64 385-18 1240-0040 70.00 24" 1-13/32 11/64 385-24 1240-0045 128.00 36" 2-3/32 7/32 385-36 1240-0050 193.00 48" 2-3/32 7/32 385-48 1240-0055 280.00

Rigid Rules Size Order Price L. x W. Grad. Number Each 6" x 3/4 3R 1294-0130 $6.70 6" x 3/4 4R 1294-0135 6.70 6" x 3/4 5R 1294-0140 6.70 6" x 3/4 16R 1294-0145 6.70 6" x 3/4 E/M 1294-0150 6.70 12" x 1" 3R 1294-0155 13.45 12" x 1" 4R 1294-0160 13.45 12" x 1" 5R 1294-0165 8.95 12" x 1" 16R 1294-0170 8.95 12" x 1" E/M 1294-0175 13.45 18" x 1-1/8 3R 1294-0180 20.35 18" x 1-1/8 4R 1294-0185 20.35 18" x 1-1/8 5R 1294-0190 15.00 18" x 1-1/8 16R 1294-0195 15.00 18" x 1-1/8 E/M 1294-0200 20.35 24" x 1-1/8 3R 1294-0205 28.55 24" x 1-1/8 4R 1294-0210 28.55 24" x 1-1/8 5R 1294-0215 17.00 24" x 1-1/8 16R 1294-0220 17.00 24" x 1-1/8 E/M 1294-0225 28.55

Flexible Rules Size Order Price L. x W. Grad. Number Each 6" x 1/2 3R 1294-0030 $6.30 6" x 1/2 4R 1294-0035 6.30 6" x 1/2 5R 1294-0040 6.30 6" x 1/2 16R 1294-0045 6.30 6" x 1/2 E/M 1294-0050 6.30 12" x 1/2 3R 1294-0055 12.30 12" x 1/2 4R 1294-0060 12.30 12" x 1/2 5R 1294-0065 12.30 12" x 1/2 16R 1294-0070 12.30 12" x 1/2 E/M 1294-0075 12.30 18" x 3/4 3R 1294-0080 18.40 18" x 3/4 4R 1294-0085 18.40 18" x 3/4 5R 1294-0090 18.40 18" x 3/4 16R 1294-0095 18.40 18" x 3/4 E/M 1294-0100 18.40 24" x 3/4 3R 1294-0105 27.95 24" x 3/4 4R 1294-0110 18.50 24" x 3/4 5R 1294-0115 18.50 24" x 3/4 16R 1294-0120 27.95 24" x 3/4 E/M 1294-0125 27.95

DELUXE USA-MADE RULESSatin finish and chrome clad. USA-Made and meets Federal specifications.

E-Z LOOK RULERSE-Z Look Rulers are constructed of hardened stainless steel with etched white numerals that stand out against the non-glare black finish.

Flexible Rules Size Order Price L. x W. Grad. Number Each 6” x 1/2 3R 1340-0033 $5.15 6" x 1/2 4R 1340-0035 5.15 6" x 1/2 5R 1340-0045 5.15 6" x 1/2 16R 1340-0040 5.15 12" x 1/2 4R 1340-0050 9.70 12" x 1/2 5R 1340-0065 9.70 12" x 1/2 16R 1340-0060 9.70 18" x 3/4 4R 1340-0070 21.80 18" x 3/4 5R 1340-0075 21.80 18" x 3/4 16R 1340-0080 21.80 24" x 3/4 4R 1340-0085 26.50 24" x 3/4 5R 1340-0090 26.50 24" x 3/4 16R 1340-0095 26.50

Rigid Rules Size Order Price L. x W. Grad. Number Each 6” x 3/4 3R 1340-0003 $5.70 6" x 3/4 4R 1340-0005 5.70 6" x 3/4 5R 1340-0015 5.70 6" x 3/4 16R 1340-0010 5.70 12" x 1-1/8 4R 1340-0020 10.60 12" x 1-1/8 5R 1340-0030 10.60 12" x 1-1/8 16R 1340-0025 10.60 18" x 1-1/8 4R 1340-0100 22.60 18" x 1-1/8 5R 1340-0105 22.60 18" x 1-1/8 16R 1340-0110 22.60 24" x 1-1/8 4R 1340-0115 28.10 24" x 1-1/8 5R 1340-0120 28.10 24" x 1-1/8 16R 1340-0125 28.10

HIGH CONTRAST FOR EASY READING!

6" X 1/2" POCKET RULESChrome Clad64ths & mm: with metric equiv. chart on back, without clip.Order No. 1299-0010 ...................... .95¢ ea. or $10.20/dozen32nds & 64ths: with decimal equivalent chart on back.Order No. 1299-0012 ...................... .95¢ ea. or $10.20/dozen

6" X 1/2" RIGID RULEStainless Steel • 4ROrder No. 1292-0005 ..........................$1.00 ea. or .75¢ ea./6

STAINLESS STEEL RULERS Plain Finish Size Order Price L x W Grads. Type Number Each 6" x 1/2" 4R Flex 1295-0070 $2.25 6" x 3/4" 4R Rigid 1295-0075 2.25 12" x 1" 4R Rigid 1295-0080 4.95 24" x 1-1/8" 5R Rigid 1295-0085 12.95

CHROME CLAD RIGID RULESGraduations: 8ths, 16ths, 32nds, & 64ths.6" x 3/4" Order No. 1295-0005 ..............................$2.50 ea.Graduations: 10ths, 50ths, 32nds, & 64ths.12" x 1" Order No. 1295-0010 ..............................$3.95 ea.


PRECISION EQUIPMENT

E201

FINE PRECISION RULESWT rules are made of the highest quality steel, hardened and tempered. Precisely etched, then black filled for readability. Chrome clad.May have slight imperfections.

Flexible Rules Size Order Price L. x W. Grad. Number Each 6" x 1/2 3R 1292-0010 $2.15 6" x 1/2 4R 1292-0030 2.15 6" x 1/2 5R 1292-0085 2.15 6" x 1/2 16R 1292-0115 2.15 6" x 1/2 E/M 1292-0088 2.15 12" x 1/2 4R 1292-0040 5.20 12" x 1/2 5R 1292-0041 5.20 12" x 1/2 16R 1292-0160 5.20 18" x 3/4 3R 1292-0165 10.40 18" x 3/4 4R 1292-0167 10.40 18" x 3/4 5R 1292-0105 10.40 18" x 3/4 16R 1292-0107 10.40 24" x 3/4 3R 1292-0170 13.60 24" x 3/4 4R 1292-0070 13.60 24" x 3/4 5R 1292-0110 13.60 24" x 3/4 16R 1292-0111 13.60

TEMPERED STEEL RULESChrome Finish Rule 1st, 2nd, 3rd, 4th B&S Order Price Lgth. Graduations/Edge Model Number EachRigid Rules… 6"/ 4R 8ths 16ths 32nds 64ths 599-314-604 1330-0385 $9.80 6"/ 5R 10ths 100ths 32nds 64ths 599-314-605 1330-0390 8.90 12"/ 4R 8ths 16ths 32nds 64ths 599-314-1204 1330-0395 18.30 12"/ 5R 10ths 100ths 32nds 64ths 599-314-1205 1330-0400 18.30Flexible Rules… 6"/ 3R 10ths 50ths 32nds 64ths 599-323-603 1330-0405 14.80 6"/ 5R 10ths 100ths 32nds 64ths 599-323-605 1330-0415 16.10 12"/ 5R 10ths 100ths 32nds 64ths 599-323-1205 1330-0425 29.00

Rigid Rules Size Order Price L. x W. Grad. Number Each 6" x 3/4 4R 1292-0035 $2.15 6" x 3/4 5R 1292-0090 2.15 6" x 3/4 7R 1292-0091 2.15 6" x 3/4 16R 1292-0117 2.15 6" x 3/4 E/M 1292-0036 2.15 12" x 1" 4R 1292-0045 5.20 12" x 1" 5R 1292-0100 5.20 12" x 1" 16R 1292-0101 5.20 12" x 1" E/M 1292-0175 5.20 18" x 1-1/8 3R 1292-0180 10.40 18" x 1-1/8 4R 1292-0109 10.40 18" x 1-1/8 5R 1292-0185 10.40 18" x 1-1/8 16R 1292-0190 10.40 18" x 1-1/8 E/M 1292-0195 10.40 24" x 1-1/8 3R 1292-0197 13.60 24" x 1-1/8 4R 1292-0198 13.60 24" x 1-1/8 5R 1292-0199 13.60 24" x 1-1/8 16R 1292-0200 13.60 24" x 1-1/8 E/M 1292-0205 13.60

CONVERSION CHART FOR RULESType Graduations3R 32nds, 64ths, 10ths, 50ths4R 8ths, 16ths, 32nds, 64ths5R 32nds, 64ths, 10ths, 100ths7R 16ths, 32nds, 64ths, 100ths16R 32nds, 64ths, 50ths, 100thsE/M 0.5mm, mm, 32nds, 64ths

OVER-RUN SPECIALS!

Rulers

HEAVY DUTY ALUMINUM STRAIGHT EDGESEasy reading graduations. Heavy duty aluminum 2" wide.Model 4004: 48" Order No. 1302-0165 ...........................$7.95Model 4010: 1M Order No. 1302-0170 ...........................$7.95

Model 4004

Model 4010

ULTRA RULE™ BENDSTAINLESS STEEL RULES90° angle shape w/ vertical scaleFor layout and measurement along the edge of a workpiece. 90° shape holds the rule tightly, while allowing you to measure the top, edge, and corners. Two vertical end scales with marking holes measure in 16ths & 32nds. width 1-3/16".

STRAIGHT EDGESwith Double Bevel

Blades Hardened & Precision Ground

5" Long Order No. 1289-0410 ..................................... $3.95 ea.7" Long Order No. 1289-0415 ..................................... $4.95 ea.

Model # 650 6" Bend Rule *close-outOrder No. 6800-0440 ...................................................... $15.85

ULTRA RULE™ FLEXIBLE STAINLESS STEEL RULERS

Micro-fine marking holes and slots at every position to instantly locate a sharp pencil point or scriber exactly where you want it. Zero uncertainty. Mechanical Pencil 0.5mm is included with every ruler purchase.

Model Description Graduations Width Order No. Price30 6" protractor full & 1/2°, 32nds 3-7/8" 6800-0395 $30.15641 6" rule 32nds, mm's 7/8" 6800-0400 8.70831 6" T-rule 16ths, 32nds,64ths 2" 6800-0410* 18.40832 12" T-rule 16ths, 32nds,64ths 2" 6800-0415 30.551211 12" Cntr. rule 32nds 1-5/8" 6800-0420* 20.401241 12" rule 32nds, mm's 7/8" 6800-0425 13.151242 12" rule 32nds, 10ths 7/8" 6800-0430 13.15640 pencil 0.5mm mechanical 6800-0435* 1.20* Close-out

24" ALUMINUM STRAIGHT EDGEEasy reading inch scale graduation. Heavy-duty aluminum straight edge - 2' width.Model 4002 Order No. 1302-1535 ....................................$4.10


PRECISION EQUIPMENT

E202

Protractors

STEEL PROTRACTORModel C183 • Satin Chrome

Finish 0 to 180 DegreesThe Starrett Model C183 Steel Protractor is another useful tool for setting bevels, transferring angles, etc., which will prove invaluable to draftsmen, machinists and all mechanics. The head is rectangular, thus providing four working edges. Back of the tool is flat. Protractor has double graduations from 0 to 180 degrees in opposite directions thus permitting reading an angle and supplementary angle directly. The blade can be locked firmly at any angle by a lock joint and knurled nut. 6" blade length.

Order No. 1240-1200

$66.00

STEEL PROTRACTORModel C182 Satin Chrome Finish

0 to 180 DegreesDesigned for draftsmen, civil engineers. Particularly valuable for drawing any number of radial lines at any desired angle from a common center. The protractor has satin chrome finish and a 6 inch blade and lies flat on the paper. Graduated from 0-180 degrees in opposite directions. Furnished with one needle point and one cone point.

Order No. 1240-2240

$112.00

UNIVERSAL BEVEL PROTRACTORWith Dial ReadingDirect reading to 5 minutes from 1-3/8" diameter dial. Two-color rotating disc shows 10° graduations and direction of indication in window. Two-color fixed dial indicates the measure values in far spread degree and 5 minute increments. Indicating range 4 x 90°. Stainless steel head & blades, hardened and ground. Head satin chromed. Positive locks. Includes bevel protractor, 12" blade, & case.

STAINLESS STEEL PROTRACTORS

0-180°, round head, 8" arm. Complete with Pouch.

Order No. 1280-0055 ...................$10.95

UNIVERSAL BEVEL PROTRACTOR

12" blade, acute angle attachment. Protractor head, magnifier lens. Dial face and vernier are finished in satin chrome. Vernier reading in 5 min. of the arc. Blade slides full length. Protractor dial is graduated over 360 degrees, (in 0 to 90 degree sectors) and rotates around the full circle. Readings to 5° of arc with vernier. Hardened stainless steel, rust and wear resistant for long life.Order Number 1280-0006 ................ $38.00

ADJUSTABLE TRAMMELSModel No. 520Draw large circles and measure sizeable distances with accuracy. Adjusting screw sets, points are removable. Die cast bodies with hardened and ground 3" needlepoint legs. Clamp opening for beam is 3/8 x 3/4. Conforms to GGG-T-66 lb.

Order No. 6800-0010 ............... $32.50

STEEL PROTRACTORModel No.17

For setting bevels, measuring and transfer ring angles. Made of ground stainless steel for optimum accuracy. Permanently etched graduations from 0-180° in opposite directions. 3-3/8 x 2" head. 6" adjustable protractor arm locks into desired position with knurled thumb nut.

Order No. 6800-0085 ............... $13.25

0- 180° 6" STEEL PROTRACTORSpring tension nut to secure rule to desired depth and angle. Narrow 6" rule graduated 64ths on one side and .5mm on reverse side. Round protractor head.

Order No. 1280-0010 .....................$6.95

7-½" ADJUSTABLE SLIDING T-BEVELAccurate tool for layout work. Polished wood stock with forged brass wing nut & tips. Blackened steel blade. 7-1/2" blade size.

Order No. 1300-0015 .............................. $7.95

SLIDING T-BEVELPEC Model 5051 T-Bevel quickly and accurately duplicates any angle.High accuracy T-Bevel features both straight slots and offset slots in the blade and straight slots in the stock. This combination allows for the widest possible variety of adjustments. Align the T-Bevel with the angle you want to duplicate then tighten the knurled locking nut. Stainless Steel, Made in USA.

Order No. 1289-0011 .................... $19.95

6" UNIVERSAL BEVEL Model No. 47This improved Universal Bevel has both offset and straight slots in the blade in combination with straight slots in the stock that make possible a wide flexibility of adjustment and angle settings impossible to obtain with many ordinary bevels. Length of blade is 6 inches; stock 3-1/2 inches. The stock lies flat on the work or paper since head of the clamping bolt is recessed.

Order No. 1240-2150 ....................................... $89.00

With Acute Angle AttachmentOrder Number 1280-0015 .............................................................. Reg. $89.00 $69.50Without Acute Angle AttachmentOrder Number 1280-0020 .................................................................................$49.95

DIGITAL PROTRACTOR360 degree measure range. Display always read upright, no matter which way level is turned. precision machined stainless frame. Simple calibration requiring no special fixtures. Versatile measuring too, angle finder, protractor and level - three in one. 3V lithium battery 500 hours continuous use.

Order No. 1291-0400 .....$89.00


PRECISION EQUIPMENT

E203

Spring DividersHardened and tempered, spring loaded. 6" Order No. 1306-0005 ...............$4.05 8" Order No. 1306-0010 .................4.9012" Order No. 1306-0065 ...............12.6018" Order No. 1306-0080 ...............22.95Outside Spring CalipersHardened and tempered, spring loaded. 6" Order No. 1306-0025 ...............$4.05 8" Order No. 1306-0030 .................4.9012" Order No. 1306-0070 ...............12.6018" Order No. 1306-0090 ...............22.95Inside Spring CalipersHardened and tempered, spring loaded. 6" Order No. 1306-0015 ...............$4.05 8" Order No. 1306-0020 .................4.9012" Order No. 1306-0075 ...............12.6018" Order No. 1306-0085 ...............22.953 Pc. Caliper SetsIncludes one each of the above: Divider, inside caliper and outside caliper.6" Set Order No. 1306-9980 ...........$9.808" Set Order No. 1306-9960 ...........10.65

CALIPERS

Firm Joint DividersHardened and tempered. 6" Order No. 1306-0105 ..................$2.25 8" Order No. 1306-0120 ....................3.0012" Order No. 1306-0135 ....................5.9518" Order No. 1306-0150 ..................14.35Firm Joint Outside CalipersHardened and tempered. 6" Order No. 1306-0100 ..................$4.00 8" Order No. 1306-0115 .....................2.30 10" Order No.1306-0050 ....................4.7512" Order No. 1306-0130 ....................5.9518" Order No. 1306-0145 ..................14.35Firm Joint Inside CalipersHardened and tempered. 6" Order No. 1306-0095 ..................$2.25 8" Order No. 1306-0110 .....................2.9512" Order No. 1306-0125 ....................5.9518" Order No. 1306-0140 ..................14.35

10 PC. DRAFTING INSTRUMENT SETModel 4360-TC. Set includes 4-3/4" & 5-3/4" spring blade adjustable ruling pens. 6" pivot compass with pen, pencil, & lengthening bar. 3-3/4" bow pencil, 4" bow divider, 6" friction divider. Screwdriver, lead holder, spare leads, and spare parts holder. Solid brass legs with durable satin chrome finish. Supplied in custom fitted case.

Order No. 1289-0545 ..........$37.40

6" FRICTION DIVIDERModel 40006-TC. Solid brass legs with durable satin chrome finish. Straight leg type with helical tooth gears for constant load without jamming.

Order No. 1289-0550

$4.75

COMPASSESSolid brass legs with durable satin chrome finish. Legs are jointed for increased range. Supplied in custom fitted case, complete with spare lead. Spare points available by special order for compass-divider conversion.

Standard Friction With Pen Adapter. Model 40006-TC. 1/16-14".

Order No. 1289-0555 ............$11.50Fine Adjust CompassModel 306-TC. 1/16-12".

Order No. 1289-0560 ........... $12.70"Speed Bow" With Pen Adapter &

Lengthening Arm. Model 408-TC. 1/16-24".

Order No. 1289-0565 ........... $19.55

Inside Caliper Model 74B-6 Order No. 1240-1570 .................................. $72.00Outside Caliper Model 75B-6 Order No. 1240-1575 ............................... $74.00Divider Model 77B-6 Order No. 1240-1580 ............................................. $86.00

6" SPRING TYPE CALIPERS & DIVIDERSWith Quick Spring NutStarrett calipers and dividers are exceptionally rugged in construction. The legs are made from heavy square stock and machined to a smooth taper. Quick-adjusting, automatic closing spring nut for rapid, accurate, time-saving settings.

ADJUSTABLE TRAMMELS Model No. 50AUsed to measure the distance between points that are too great to be reached with dividers. Die cast with black wrinkle finish with hardened, forged 3" steel points. Beam is not furnished with trammels. Heads accommodate a beam 3/8 thick and 3/4 wide.

Order No. 1240-1865 ..................................................... $80.50

Calipers & Compasses

INTERNAL DIAL CALIPERS Bezel rotates for zero setting. Button used for opening arms. .001” graduation..375" - 1.375" Range Order No. 1266-0085 ............................ $70.00.750" - 1.750" Range Order No. 1266-0090 ............................ $75.001.125" - 2.125" Range Order No. 1266-0095 ............................ $80.00OR BUY ALL 3 & SAVE 10% Order No.. 1266-9950 .........Reg. $186.00 $199.00


PRECISION EQUIPMENT

E204

Gage Blocks

81 Pc. Set Nominal No. of Stepping Dimensions Blocks 0.0001 0.1001 ÷ 0.1009 9 0.001 0.101 ÷ 0.149 49 0.05 0.05 ÷ 0.95 19 1 1; 2; 3; 4 4

Order No. 1311-0020$97.95Reg. $299.00

Square Sets…81 Pc. Set • Grade B Certified by an ISO 17025 Lab. N.I.S.T. Traceable with certificate. 1 Block: .050" 10 Blocks: .100"-.1009" By .0001"49 Blocks: .101"-.149" By .001" 17 Blocks: .150"-.950" By .050"4 Blocks: 1.000"-4.000" By 1.000"

Order No. 1311-0050 ............................................ $515.95

PREMIUM GRADE GAGE BLOCK SETSAll Blocks are serialized. Complete with deluxe wood case. Each block meets or exceeds federal spec i f i ca t ion ASME B89.1.9-2002 and is within the grade B tolerance (± .000050).

Tolerances in millionthsBlock Size Grade B Grade 0 .050" +/- 50 +/- 6 >.050"-.450" +/- 50 +/- 5> .450"-1.000" +/- 50 +/- 6 >1.000"-2.000" +/- 50 +/- 8 >2.000"-3.000" +/- 50 +/- 10 >3.000"-4.000" +/- 50 +/- 12

GAGE BLOCK SETS Workshop Class BGage block sets are made of fully seasoned alloy tool steel with a Rockwell hardness of 65 providing both long wear and resistance to stains and rust. These blocks are manufactured under carefully controlled conditions allowing for the highest degree of accuracy when used at temperatures of 68°F (20°C). Sets are calibrated to meet or exceed Federal Specifications GGG-G-15a. Includes fitted case.

36 Pc. Set Nominal No. of Stepping Dimensions Blocks – – 0.10005 1 0.0001 0.1001 ÷ 0.1009 9 0.001 0.101 ÷ .0109 9 0.01 0.11 ÷ 0.19 9 0.1 0.1 ÷ 0.5 5 – – 1 1 – – 2 1 – – 4 1

Order No. 1311-0021$64.95Reg. $188.00

81 Pc. Gage Block Set • Grade 21-Yr. Guarantee against Factory Defects. A complete certificate of calibration traceable to the National Institute of Standards & Technology comes with each set. All blocks meet or exceed Federal Specs: GGGG-15C for flatness. Each set is provided in a fitted wood case.

Blocks in Set:9 Blocks: .1001-.1009 in .0001 steps49 Blocks: .101-.149 in .001 steps19 Blocks: .050-.950 in .050 steps4 Blocks: 1-4" in 1" steps

88 Pc. METRIC Set • Grade 21 Blocks: 1.0005 9 Blocks: 1.001-1.009 in 0.001mm Steps 49 Blocks: 1.01-1.49 in 0.01mm Steps19 Blocks: 0.5-9.5 in 0.5mm Steps 10 Blocks: 10-100 in 10mm Steps

Order No. 1311-0040 ..........$113.95

81 Pc. Set • Grade B • Certified by an ISO 17025 Lab. N.I.S.T. Traceable with certificate. 9 Blocks: .1001 - .1009 in .0001 Steps 49 Blocks: .101 - .149 in .001 Steps 19 Blocks: .050-.950 in .050 Steps 4 Blocks: 1.000 - 4 in 1 Steps

Order No. 1311-0010 ............................................$250.95

81 Pc. Set • Grade 0 • Gage Block Set Certified by an ISO 17025 Lab.

Order No. 1311-0015 ............................................$382.95

Rectangular Sets…36 Pc. Set • Grade B • Certified by an ISO 17025 Lab. N.I.S.T. Traceable with certificate. 9 Blocks: .1001 - .1009 in .0001 Steps9 Blocks: .101 - .109 in .001 Steps 9 Blocks: .110-.190 in .010 Steps9 Blocks: .050, .100, .200, .300, .400, .500, 1, 2, 4 in.

Order No. 1311-0005 ............................................$178.9536 Pc. Set • Grade 0 • Gage Block Set Certified by an ISO 17025 Lab.

Order No. 1311-0006 ............................................$279.95

Tolerances Order Price Piece (millionths) Number Each 81 +4/–2 1311-0025 $361.95 +8/- 4 +10/- 5 +12/- 6

81 Pc. Set • Grade 0 • Certified by an ISO 17025 Lab.

Order No. 1311-0055 ............................................ $931.95

Rectangular Sets…

Rectangular Set…

Tolerances Metric Microns (DIN Standard) Grade 2 <10mm +/-.40 <10-25mm +/-.60 <25-50mm +/-.80 <50-75mm +/-1.00 <75-100mm +/-1.20

WEBBER GAGE BLOCK SETSAll Sets contain a certificate of inspection, which verifies traceability to the National Institute of Standards and Technology (NBS) good for 1 year. The tolerance for all sets listed here is +.000004" -.000002".

Rectangular Steel Gage Block Sets in Case

Measuring No. of Order Price Range Blocks Block Size and Steps Number Each81 Pc. Set Model RS81.A1 9 .1001-.1009 steps of .0001 1240-0410 $1,250.00 .100-12.000 steps of .001 49 .101-.149 steps of .001 .200-12.000 steps of .0001 19 .050-.950 steps of.050 4 1.000-4.000 steps of 1 inch9 Pc. Set Model RS9.A1 1 .0625 1240-0420 $289.00 .0625-4.000 steps of .0625 2 .100 & .125 .100-4.000 steps of .100 3 .200, .250 & .300 3 .500, 1.000 & 2.000

MINI METRIC GAGE BLOCK SET Model No. RS 9.MA1Mini-Metric set used for calibrating micrometers, vernier gages and similar measuring tools. The set has a capacity of 61mm in 1mm, 0.5mm or 0.25mm steps. Its nine rectangular hardened steel blocks include these sizes: 1mm, 2mm, 2.25mm, 2.5mm, 3mm, 5mm, 10mm, 15mm and 25mm. They are finished to Federal Accuracy Grade 2 (+ 0.0001mm, - 0.00005mm) and come in a lined metal case.

Order No. 1240-0445 ................................................................................................. $299.00


PRECISION EQUIPMENT

E205

Order Reg Price Range Pcs. Accuracy Number Price Each .011-.060 50 +.0002 –.0000 1327-0005 $34.00 $18.99 .011-.060 50 +.0000 –.0002 1327-0010 34.00 18.99 .011-.250 240 +.0000 –.0002 1327-0035 99.00 59.00 .061-.250 190 +.0002 –.0000 1327-0015 69.00 38.95 .061-.250 190 +.0000 –.0002 1327-0020 69.00 38.95 .251-.500 250 +.0002 –.0000 1327-0025 75.00 55.90 .251-.500 250 +.0000 –.0002 1327-0030 75.00 69.00 .501-.625 125 +.0002 –.0000 1327-0045 89.00 69.00 .501-.625 125 +.0000 –.0002 1327-0050 89.00 79.00 .626-.750 125 +.0002 –.0000 1327-0055 99.00 79.00 .626-.750 125 +.0000 –.0002 1327-0060 99.00 69.00 .751-.832 81 +.0002 –.0000 1327-0065 149.00 119.00 .751-.832 81 +.0000 –.0002 1327-0067 149.00 89.00 .833-.916 84 +.0002 –.0000 1327-0070 219.00 159.00 .833-.916 84 +.0000 –.0002 1327-0072 219.00 99.00 .917-1.000 84 +.0002 –.0000 1327-0075 265.00 189.00 .917-1.000 84 +.0000 –.0002 1327-0077 265.00 169.00

PIN GAGES Precis ion lapped to a microlapped finish. Each gauge is clearly marked with size and are 2" long. Center-less lapped to 10 micro-finish. Fully hardened, Rockwell 60-62. Price includes deluxe fitted case.

36 PC. SPACE BLOCK SET3/4" diameter. Each block clearly marked for size. Hardened and lapped. Make any length desired. Complete in fitted box. Included in Set: .050, .060, .0625, .070, .080, .090, .100, .102, .103, .104, .105, .106, .107, .108, .109, .110, .120, .125, .130, .140, .150, .160, .170, .180, .190, .200, .300, .400, .500, .600, .700, .800, .900, (2) 1.000, hex key and (4) set screws.

Order No. 1325-0005

$33.00 Reg. $74.00

HANDLES FOR PIN GAGESOne set uses one handle, 8 handles cover all sizes8 size collets are spring adjusting and self-centering design, which are used for whole range of sizes of pins (Collets for MO are self-expending design). Handles & collets are made from aluminum to protect in gages. (Collets for MO are made of copper). Color coded handle for GO/NOGO GO checking. Powder coated handle body. Inlcudes One handle with two free collets.

Description Order No. Price .011-.060 for MO 50 pc set 1327-0150 $12.95 .061- to .250 for M11 190 pc set 1327-0155 13.95 .251 to .500 for M2 250 pc set 1327-0160 16.95 .501 to .625 for M3 125 pc set 1327-0165 18.95 .626 to .750 for M4 125 pc set 1327-0170 20.95 .751 to .832 for M5 82 pc set 1327-0175 22.95 .833 to .916 for M6 84 pc set 1327-0180 23.95 .917 to 1.000 for M7 84 pc set 1327-0185 24.95

Pin Gages & Blocks

1-2-3 BLOCKS706 Series

Manufactured to precis ion tolerances. Because of their extreme accuracy, these blocks are a must for all inspection labs and are great in shop setups for precise positioning of workpiece on milling machines, jig borers, and drill presses.

Specifications:Blocks are 1 x 2 x 3", parallelism .0001", squareness .0001". Hardness RC 63-65, flatness .0001", high accuracy. Hardened and ground. Starrett Order Price Model Description Number Each 706AZ Single 1 x 2 x 3 block in case 1240-2415 $258.00 706BZ Matched pair 1 x 2 x 3 blocks in case 1240-2420 565.00

1-2-3 BLOCKSMatched PairsPrecision ground and case hardened. Rockwell 48-C hardness. 15 Holes on each face, 3 holes on each end, 5 holes on each side. 5 Holes tapped 3/8-16 for clamping operations. Squareness .0001" / inch. Cross drilling design for minimum weight & maximum strength.

WT Import: Order No. 1291-0081 ................... $12.95/pairReg. $18.50/Pair

2-4-6 BLOCKSDimensions: 2" x 4" x 6" & 5/8-11 tapped holes.

Order No. 1291-0140 ....................................... $89.00/pairReg. $139.00/Pair

25-50-75MM METRIC BLOCKSParallelism 0.003mm, squareness 0.003/25mm, flatness 0.003mm.

Order No. 1291-0250 ....................................... $12.95/pairReg. $19.50/pair

PRECISION GROUND 1-2-3 BLOCKS

Ideal for precision layout & setup. Each set consists of a matched pair of 1 x 2 x 3 blocks, five 3/8-16 stainless steel socket head cap screws, hex key, and shop-hard molded case. Each block is precision ground on all six surfaces. Case hardened (HRC 50-60). Surface finish from 6 to 16 micro-inches. Squareness on all sides to within .0001". 23 holes: 5 tapped 3/8-16"; 18 untapped thru holes. Cross drilling for maximum strength.

B&S 599-750-10 Order No. 1330-1700 .............$76.00/Set

NEW! MAGNETIC TOOLMAKER’S BLOCK5" length x 2" width x 2" height. Precision ground flat, square and parallel to an overall accuracy .0005". Top, bottom and end magnetize simultaneously. ON/OFF switch.

Order No. 1971-0030

$59.00


PRECISION EQUIPMENT

E206

V-BLOCK & CLAMPModel No. 567

The block is of special tool steel, hardened and precision ground to extreme accuracy. The sides are ground parallel and the groove is ground central and parallel to the sides and the base. Clamp is made from a finished forging. The block is 1-7/8 inches square; the base length is 3-1/2 inches and capacity is 1-5/16 inches.

Order No. 1240-1770

$265.00A Precision V-Block for the most accurate tool room work. Hardened Steel. All sides precision ground parallel and square. V-Groove ground central and parallel to sides and base; perfect alignment in matched pairs. Holds square or round work. Clamp has screw holes at 45° and 90°. Permits grinding ends of work square with sides. Stepped groove construction permits low or high clamp mounting for small or large work up to 2" round, 1-7/16 square. Clamps do not project, permitting block to be used on base, ends or sides. Tapped holes permit mounting blocks on face plates or angle irons. Model Order Price No. Description Number Each 568A V-Block & 2" Dia. round; Clamp 1240-1175 $174.00 568B Clamp only 1240-1180 24.00 568C V-Block & Clamps (match pair) 1240-1185 383.00

V-BLOCKS & CLAMPSModel 278 • 1" Capacity

Hardened & GroundSet comes complete with (2) V-blocks and (2) clamps. Precision ground to extreme accuracy. The V's are ground central, parallel and square with the ends and sides. For layout work in connection with a surface plate, angle iron, etc. They will also hold work securely and accurately during drilling, milling, and grinding operations. They

are manufactured and numbered in pairs, so that the V's in each block are always in alignment. The blocks have a tapped hole through the sides so that they may be attached to an angle iron by a 1/4-20 screw. Each block is about 1-1/4 square and 1-5/8 long.

Order No. 1240-2365

$216.00

The V-blocks of this set are case hardened and may be used singly or in pairs in layout work and to firmly hold

circular stock during drilling, milling and grinding operations. A feature in this set is the 6" steel rod which passes through each block and is firmly held by friction bushings. When using the blocks in pairs, the rod keeps the blocks in alignment and holds both of them under the work. The blocks are furnished in pairs and each is 1-1/4 square. The large V is about 13/16 and the small V about 13/32 across the mouth. Model Order Price No. Description Number Each 271A (2) V-blocks (1 pair) 1240-2370 $62.00 271B Clamp only 1240-2375 18.00 271C (2) V-blocks & (1) clamp 1240-2380 81.00

DUAL VEE MAGNETIC V-BLOCK

Model No. 566Starrett Magnetic V-Blocks are designed for versatility and accuracy. All working surfaces are precision ground with typical Starrett accuracy to provide convenient set-ups for inspection and light machining. Two precision vees will hold round stock sizes from 1/4 inch to 1-3/4 inch diameters. A powerful permanent magnet is controlled by a rotary switch. Each block is 2-1/2 wide x 3" high x 3" long. The top vee is 1-1/2" wide at top, and 3/4 wide at bottom with 90° included angle.

Order No. 1240-1775

$393.00V-BLOCKS

& CLAMP271 Series

1-1/4 Capacity Case Hardened Steel

V-BLOCKS & CLAMPSSeries 568 • Holds 1-7/16

square or 2" round work Hardened and Ground

90° Vee Blocks Suburban Vee Order Price Suburban Order Price Model Dimensions Cap'ty. Weight Number Each Model Number / Pair VB-222-S0 2-1/2 x 2-1/2 x 2" 1-3/8 3 lbs. 1701-0245 $146.00 VB-222-M-S0 1701-0275 $ 383.00 VB-334-S1 3" x 4" x 3" 2-1/4 9 lbs. 1701-0250 213.00 VB-334-M-S1 1701-0280 491.00 VB-466-S2 6" x 6" x 4" 4-3/8 33 lbs. 1701-0255 509.00 VB-466-M-S2 1701-0285 1,208.00 VB-666 6" x 6" x 6" 4-3/8 50 lbs. 1701-0260 686.00 VB-666-M 1701-0290 1,650.00

60° Vee Blocks VB-602 2-1/2 x 2-1/2 x 3" 1-3/8 3 lbs. 1701-0265 225.00 VB-602-M 1701-0295 618.00 VB-604 3" x 4" x 3" 2-1/4 8 lbs. 1701-0270 328.00 VB-604-M 1701-0300 836.00

–– Matched Pairs ––

VEE BLOCKSParallel, square and central within .0002". Each block comes with one clamp. Made of hardened steel Rc 58-62. Sizes other than those listed are available by special order.

V-Blocks


PRECISION EQUIPMENT

E207

UNIVERSAL ANGLE BLOCK SET

in Fitted Wood Case

SOLID ANGLE PLATESin Wood CaseHardened and ground steel. Precisely ground angles for set-ups in tooling, production and inspection. Each block is 9/32 thick. Four 11/32 holes for easy mounting. Sizes include:

0°-60° PRECISION ANGLE BLOCK

Fast, easy to use for drilling, milling and set-up applications. 0°-60° Adjustable angle by locking the hex screw on the bottom. Squareness: .0002". Angle accuracy ±.001". HRC 50-55°. 1-3/16 wide x 1-7/8 high x 4" long.

Order No. 2127-0020 .............................................. $49.00Reg. $69.00

ANGLE BLOCKSSets in fitted case. Size is 3" long x 1/4 thick. Furnished in 1° increments to 5°, and in 5° increments to 30°. Hardened steel, precision ground. Accuracy ±.0001"/ inch.

Suburban Weight Order Price Model Description (lbs.) Number Each AB10ST Set of 10 Angle Blocks 3 1701-0345 $208.00 ABQTR Optional 1/4° block 1 1701-0350 22.00 ABHLF Optional 1/2° block 1 1701-0355 26.00

10 PC. ANGLE BLOCK SET WITH CASE

Furnished in 1° increments to 5°, and in 5° increments to 30°. Simple, quick angle set-ups. Eliminates calculations, avoids errors. Lightly magnetized for better holding. Manufactured of oil hardened, precision ground steel. Sizes: 3" long x 1/4 thick. Accuracy: .0001"/ inch.

Order No. 1291-0080 .........................................$24.50/setReg. $49.00/Set

30° x 60° x 90°: 4 x 3-15/32 x 2", 45° x 45° x 90°, 3 x 3 x 4-3/8".

Order No. 2127-0025 ......................................... $19.50/setReg. $27.50/Set

No sine vise, sine plate, angle vise, angle chart or block gage needed. Tolerance ±1°. Hardness HRC 45-50. All ground finish. Contains V-block 10°, 15°, 30° and angle plate 1°, 2°, 3°, 4°, 5°.

Order No. 1291-0082 ......................................... $59.00/SetReg. $89.00

V-Blocks & Angle Blocks

PRECISION V-BLOCK & CLAMPGround & hardened for parallelism & squareness. More versatile than other V-blocks. Can be used on either side, end, or base. Threaded holes on each side and base attaches to angle plates. Block is 1-7/8" square; base length is 1-19/32" and capacity is 1-5/16".

Order No. 1290-0065

$39.95

Mfg. Max. Bar Order Price Model Block Size Diameter Number /Pair 475-003 1-1/4 x 1-1/4 x 1-5/8 3/4 1290-0003 $19.00 475-005 1-3/8 x 1-5/8 x 1-3/4 1" 1290-0005 29.00 475-010 1-5/8 x 1-3/4 x 2-3/4 1-1/2 1290-0010 39.00 475-015 1-3/4 x 2-1/2 x 2-3/4 1-1/2 1290-0015 89.00 475-020 2-3/4 x 3-1/2 x 4-7/8 2-1/8 1290-0020 79.00

Mfg. 90° V-Block Vee Order Reg. Price Model Max. Dims. Cap’ty. Number Price /Pair 910-301 1-3/8 x 1-3/8 x 1-3/16 19/32 1290-0040 $42.00 $19.00 910-302 2-3/8 x 2-3/8 x 2 1-3/16 1290-0045 63.00 34.00 910-303 4-1/8 x 4-1/8 x 3-1/16 2-9/16 1290-0050 99.00 69.00

V-BLOCKSAll V-blocks are parallel, square and centered within .0002". Completely hardened and ground tool steel. Sold in Pairs.

PRECISION V-BLOCKS

Blocks are chrome steel, hardened and ground. Accurate enough for layout & surface plate use. Square, parallel and concentric within ±.0001". Blocks 475-015 and 475-020 can be set up on side or bottom. 90° V-angles.

MULTI-USE BLOCK SETFor square and round work. Stepped groove construction. Hardened tool steel. Machined & ground in pairs. Sides precision ground parallel & square to an accuracy of 0.0004". Supplied in pairs with two clamps. Capacity: 2" round and 1-7/16 square. Dim: 2-3/8 L x 2-3/4 W x 2" H.

Order No. 1290-0070

$79.00

2" V-Width: Dimensions: 3-3/4" H x 2-3/4" W x 4" L.

Order No. 1971-0015 ............................................... $49.00Reg. $79.00

MAGNETIC V-BLOCKHold round & irregular shapes for scribing, grinding, measuring and machining. Powerful holding force. Precision ground finish for use as an inspection device. Fixed on/off switch.


PRECISION EQUIPMENT

E208

Parallel sizes: 3/8 to 1/2, 1/2 to 11/16, 11/16 to 15/16, 15/16 to 1-5/16, 1-5/16 to 1-3/4 and 1-3/4 to 2-1/4. Parallels consist of two pieces which are dovetailed. They slide smoothly and can be easily adjusted and set up to size with a micrometer, or they can be quickly inserted in openings and expanded to size. The size of the hole can then be determined by measuring the parallels externally with a micrometer. Can be used in pairs as parallels.

Order No. 1291-9960 .......................................................... $24.95/Set

PRECISION PARALLEL SETSMade of high grade alloy steel, hardened and ground. Five holes in each parallel to make them lighter and for easy set-up. Accuracy: .0003" parallelism in height ±.0002" to size in height. Complete in box.

1/2 8-Pair Set (1 pair each): W x H x L Hole Size W x H x L Hole Size 1/2 x 7/8 x 6" 5/16 1/2 x 1" x 6" 5/16 1/2 x 1-1/8 x 6" 3/8 1/2 x 1-1/4 x 6" 3/8 1/2 x 1-3/8 x 6" 7/16 1/2 x 1-1/2 x 6" 7/16 1/2 x 1-5/8 x 6" 1/2 1/2 x 1-3/4 x 6" 1/2

Order No. 1291-0180 ................. $54.00/SetReg. $109.00

3/16 & 1/2 4-Pair Combo Set (1 pair each): W x H x L Hole Size W x H x L Hole Size 3/16 x 1" x 6 5/16 3/16 x 1" x 6" 3/8 1/2 x 1-1/2 x 6 7/16 1/2 x 1-3/4 x 6" 1/2

Order No. 1291-0016 ...................$11.95/SetReg. $69.00

6 PC. ADJUSTABLE PARALLEL SET

in Fitted Case

20 PC. THIN STYLE PARALLEL SET

Made of high grade alloy steel, hardened and ground from 1/8" stock. 2 holes in each parallel. Accuracy: ±.0002" parallelism in height ± to .0001" size in height. Includes fitted wooden case. One pair each of the following:

W x H x L Hole Size W x H x L Hole Size 1/8 x 1/2 x 6" 13/64 1/8 x 1-1/8 x 6" 3/8 1/8 x 5/8 x 6" 1/4 1/8 x 1-1/4 x 6" 3/8 1/8 x 3/4 x 6" 5/16 1/8 x 1-3/8 x 6" 7/16 1/8 x 7/8 x 6" 5/16 1/8 x 1-1/2 x 6" 1/2 1/8 x 1" x 6" 5/16 1/8 x 1-5/8 x 6" 1/2

Order No. 1291-0145 ............$29.95/SetReg. $79.00

9 PC. WAVYPARALLEL SET

in Fitted CasePractical and reliable for the precise vertical positioning of workpieces. Simple and easy to use in precision clamping of parts in drilling, boring, milling, grinding, assembly work, etc. Clamp a group of flat workpieces. Can readily be used as elastic shims. Thin and fragile workpieces can be secured without damage by utilizing the spring pressure, as in assembly applications etc. Range of 9 pair: 1/2 to 1-1/2" in 1/8" height increments.

Order No. 1291-0280 .......................... $29.00Reg. $69.00

20 PAIR ULTRA-THIN PARALLEL SET

1/32 thickHardened to 50 RC. Parallelism .0001". Height .001" Accuracy. Includes fitted wood case. Parallelism in height ±.0001", to size in height ±.001". Contains 1/32 thick, 20 pair set. Range of sizes include 1/2" through 1-11/16" in 1/16" increments.

Order No. 1291-0155

$49.00/SetReg. $69.00

1/4" 9-PAIR PARALLEL SETBlow molded case

High grade alloy steel, hardened and ground. Two holes in each parallel for easy set-up. Accuracy: .0003" parallelism. Height: ±.002". All parallels are 6" long. Includes one pair each (height): 3/4, 7/8, 1", 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, and 1-3/4.

Order No. 1291-0255 ...........................$34.50Reg. $79.00

Parallels

3/16 4-Pair Set (1 pair each): W x H x L Hole Size W x H x L Hole Size 3/16 x 1" x 6" 5/16 3/16 x 1-1/4 3/8 3/16 x 1-1/2 7/16 3/16 x 1-3/4 1-1/2

Order No. 1291-0018 ................ $29.00/SetReg. $65.00

1/2 4-Pair Set (1 pair each): W x H x L Hole Size W x H x L Hole Size 1/2 x 1" x 6" 5/16 1/2 x 1-1/4 x 6" 3/8 1/2 x 1-1/2 x 6 7/16 1/2 x 1-3/4 x 6 1/2

Order No. 1291-0017 ................ $39.00/SetReg. $87.50


PRECISION EQUIPMENT

E209

ADJUSTABLE PARALLELSSeries 154 3/8 to 2-1/4 InchStarrett Adjustable Parallels have a wide range of uses in layout, gaging, inspection work and for setups on various machine tools. Adjustable feature allows exact size by micrometer measurement and also permits use in place of several solid type parallels. Parallels consist of two pieces which are dovetailed.

STEEL PARALLELSSeries 384 •

Hardened & GroundStarrett No. 384 steel parallels are hardened and ground to close limits. Indispensable for inspection and layout work or for various setups on drill presses, milling and grinding machines, shapers, etc. They are made from a special

Model Order Price Number Thickness Width Number / Pair 384A 1/8 1" 1240-1745 $83.00 384C 3/16 7/8 1240-1750 83.00 384E 1/4 3/4 1240-1755 86.00 384G 3/8 1/2 1240-1760 86.00 S384Z Set of 4 Pairs in Case: 1240-1765 380.00

ULTRA PRECISION GROUND PARALLEL SETModel 599-921-10Includes 10 pairs 6" long by 1/8 wide: 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8. Variation in height of matched parallels ±00015". Parallel within .0002". 58-63 HRC hardness. High grade alloy steel. Two holes in each parallel.

Order No. 1330-1585

$269.00

Model S154LZ Set of 63/8 - 2-1/4 In Case

Order No. 1240-1160

$209.00

grade of tool steel hardened and accurately ground on the four sides. Made in 6" lengths. Sold in pairs only.

Model S154SZ Set of 43/8 - 1-5/16 In Case

Order No. 1240-1155

$124.00BRIDGE

UPPERPRISM

LOCK

SUPER WEE BLOCKS in Fitted CaseA unique holding tool for miniature or intricate parts, used in conjunction with larger V-blocks. Capacity .030" to 9/32. Ideal holding fixture for grinding & indexing punches and pins, drilling & milling, EDM inspection on optical comparators. Furnished with bridges to straddle long work pieces, allowing top hold-down screw of V-block clamp to be utilized. Hardened and high precision ground, square and parallel within .0002". Includes 2 Super Wee Blocks, size A .030"-5/32 capacity and size B .050"-9/32 capacity, Bridge A and B, plus 5 upper prisms, 1/8, 5/32 and 3/16" capacity.Order No. 1291-0150 ............................................... $89.00/Set

5 PC. THIN ANGLE SET

6° thru 10°By combining Set No's. 1 & 2, 1/2°-10° or 1°-19° in half degree increments can be obtained.Set No. 2 Order No. 1291-0020 ................................. $7.95

8 PC. MILLING & DRILLING PARALLELSThin BarsIn 4 sizes: 1/2, 5/8, 3/4 & 7/8. Set work places to needed height in vise in seconds! Complete set of eight parallels in eighth-inch increments. 5/32 Thickness allows drilling through work near edges without hitting parallels.Order No. 1291-0015 ........................................................$10.95

6 PC. THIN ANGLE SET1/2° thru 5°By using two angles, this set will span 1/2° -5° in half degree increments, or 1°-9° in 1° increments.Set No. 1 Order No. 1291-0010 ...................................$9.95

Reg. $14.00

THIN GROUNDPARALLELS & ANGLES

Precision ground on working surfaces, gun blued on non-working surfaces. Two 1/4" holes are provided for mounting. Hardened and ground.

Parallels

PLANER & SHAPER GAGE with Case5" Long x 9/16 wide planer gage, one extension post, max. height 6-1/2. Base and slide are hardened and beveled to provide accurate alignment & parallelism. Ranges from 1/4 to 6-1/4. Extension is 3" long. Precision level insures accuracy. Platform has extra tapped holes to accommodate post for dial indicators and accessories. The quickest and most accurate way of setting tools.

Order No. 1289-0055

$79.00Reg. $180.00


PRECISION EQUIPMENT

E210

4-WAY PARALLELSTwo of a kind—one at a time…No need to buy matched pairs

anymore! Precision ground to exact sizes. We guarantee it. Suburban Tool’s hardened and ground steel parallels are held to such close tolerances on four sides, that there is no need to buy matched pairs! These hardened and ground steel parallels can be purchased and used individually or can be matched with any number of other individual Suburban Parallels at any time. Different sizes can be used together. For example: a 6 x 1/2 x 1 parallel can be used with one 8 x 3/4 x 1. Held to size ±.00025" on four sides. Opposite sides parallel within .000-6 inches.

Tool Order Price Number Size Number Each P-06025038 6" x 1/4 x 3/8 1701-0970 $49.00 P-06025050 6" x 1/4 x 1/2 1701-0975 50.00 P-06025063 6" x 1/4 x 5/8 1701-0980 50.00 P-06025075 6" x 1/4 x 3/4 1701-0985 53.00 P-06025100 6" x 1/4 x 1" 1701-0990 53.00 P-06038050 6" x 3/8 x 1/2 1701-0995 53.00 P-06038063 6" x 3/8 x 5/8 1701-1000 55.00 P-06038075 6" x 3/8 x 3/4 1701-1005 55.00 P-06050063 6" x 1/2 x 5/8 1701-1010 64.00 P-06050075 6" x 1/2 x 3/4 1701-1015 68.00 P-06050100 6" x 1/2 x 1" 1701-1020 70.00 P-08050100 8" x 1/2 x 1" 1701-1025 106.00 P-08075100 8" x 3/4 x 1" 1701-1030 115.00 P-08075125 8" x 3/4 x 1-1/4 1701-1035 121.00 P-12075100 12" x 3/4 x 1" 1701-1040 136.00 P-12100150 12" x 1" x 1-1/2 1701-1045 161.00 P-12100200 12" x 1" x 2" 1701-1050 178.00 P-12150200 12" x 1-1/2 x 2" 1701-1055 246.00 P-12150300 12" x 1-1/2 x 3" 1701-1060 288.00

GROUND RECTANGULAR PARALLELSHigh Speed Steel, can also be used as Tool Bits. Order Price Size Number Each 1/8 x 1/2 x 4" 2217-0005 $2.10 3/16 x 1/2 x 4" 2217-0010 2.70 1/4 x 1/2 x 4" 2217-0015 3.25 5/16 x 1/2 x 4" 2217-0020 3.60 3/8 x 1/2 x 4" 2217-0025 4.20

4-WAY STEEL PARALLELSMatched PairsMade of steel hardened to Rc 58-62 & ground in matched pairs on four sides for use where extra precision is required. Pairs are matched in size on the width & height to a tolerance of ±0.0002" on 6, 8, 12" lengths & 0.0003" for longer lengths. Total parallelism, straightness over the full length & size tolerance between pieces of a matched pair is 0.0001" on 6 & 8" lengths, 0.0002" on 12" lengths & 0.0003" on longer lengths. Adjacent ground sides are square with each other within 0.0004", except the 6 x 1/4 x 3/4, 6 x 1/4 x 3/8 & 6 x 1/4 x 1/2 sizes, which are square within 0.0005". Tool Order Price Number Size Number Each P-06025038-M 6" x 1/4 x 3/8 1701-1065 $123.00 P-06025050-M 6" x 1/4 x 1/2 1701-1070 126.00 P-06025063-M 6" x 1/4 x 5/8 1701-1075 126.00 P-06025075-M 6" x 1/4 x 3/4 1701-1080 131.00 P-06038050-M 6" x 3/8 x 1/2 1701-1085 131.00 P-06038075-M 6" x 3/8 x 3/4 1701-1090 135.00 P-06050063-M 6" x 1/2 x 5/8 1701-1095 161.00 P-06050075-M 6" x 1/2 x 3/4 1701-1100 168.00 P-06050100-M 6" x 1/2 x 1" 1701-1105 171.00 P-06063100-M 6" x 5/8 x 1" 1701-1110 178.00 P-06075100-M 6" x 3/4 x 1" 1701-1115 186.00 P-06075150-M 6" x 3/4 x 1-1/2 1701-1120 197.00 P-08050100-M 8" x 1/2 x 1" 1701-1125 266.00 P-08063150-M 8" x 5/8 x 1-1/2 1701-1130 266.00 P-08075100-M 8" x 3/4 x 1" 1701-1135 282.00 P-08075125-M 8" x 3/4 x 1-1/4 1701-1140 300.00 P-08075163-M 8" x 3/4 x 1-5/8 1701-1145 327.00 P-12075100-M 12" x 3/4 x 1" 1701-1150 342.00 P-12100150-M 12" x 1" x 1-1/2 1701-1155 402.00 P-12100200-M 12" x 1" x 2" 1701-1160 444.00 P-12150200-M 12" x 1-1/2 x 2" 1701-1165 615.00 P-12150300-M 12" x 1-1/2 x 3" 1701-1170 720.00 P-18100200-M 18" x 1" x 2" 1701-1175 732.00 P-24100200-M 24" x 1" x 2" 1701-1180 990.00 P-36100200-M 36" x 1" x 2" 1701-1185 1,591.00

4-WAY PARALLEL SETS Matched PairsSets include matched pairs of parallels in the sizes indicated. Furnished in wooden holder marked with sizes. Tool Order Price Number Size Number Each P4W-SET-A 6" x 1/4 x 1/2, 6" x 1/4 x 3/4, 6" x 1/2 x 3/4, 6" x 1/2 x 1" 1701-1190 $650.00

Parallels & Sine Bars

SINE BARSSine bars made of steel, hardened to Rc 58-62. They are ground square and parallel within .0002". Center distance of rolls within .0001". The end rail included with each sine bar, can be mounted at either end. Center Model Dist. of Body Wgt. Order Price No. of Rolls Size Dimensions (lbs.) Number Each SB111 5" 1" x 1" 6 x 1 x 1-11/16 2 1701-0220 $189.00 SB1110 10" 1-1/8 x 1-1/4 11 x 1-1/8 x 2-1/16 5 1701-0225 267.00Order No. 1291-0070 ......................................... $31.95

INSPECTION SET 3 PC.1-2-3 BlocksPrecision ground/case hardened. Five 3/8-16 tapped holes are proveded for clamping operations. Squareness of all side is within .0001". Parallel accuracy .0003".

5" Precision Sine barAccurate to .004" on parallelism. Hardened and ground. Wide: 1".


PRECISION EQUIPMENT

E211

3" SINE BARSine bar and rolls are made of quality tool steel, hardened and ground for extreme accuracy. Top surface accurate to .00003" per inch of length. Parallelism .00004". Rolls are accurate to within .0002" center to center. The bottom part of the bar extends past the bottom of the rolls. When the tool is moved over the surface plate, all wear is eliminated from the rolls. 1/4" Hole diameter, 1-5/8" center distance between holes. Center Dist. of Body Order Reg. Price of Rolls Size Dimensions Number Price Each 3" 1/4 x 7/8 3-1/2 x 1/4 x 1-3/16 1291-0064 $24.00 $14.95

DELUXE SINE BARSParallelism: .00004". Top surface accuracy: .00003". Bar and rolls are hardened and ground. Center to center distance between rolls is accurate to within .0002". Sine bars have tapped holes for holding down. Bottom of tool protrudes past rolls which eliminates wear. Center Dist. of Body Order Reg. Price of Rolls Size Dimensions Number Price Each 5" 15/16 x 1-1/8 6-1/4 x 15/16 x 1-3/4 1291-1165 $62.00 $44.00 10" 1-1/4 x 1-1/2 12-1/16 x 1-1/4 x 3 1291-1170 124.00 79.00

5" SINE BARSine bar and rolls are made of quality tool steel, hardened and ground for extreme accuracy. Top surface accurate to .00003" per inch of length. Parallelism .00004". Rolls are accurate to within .0002" center to center. The bottom part of the bar extends past the bottom of the rolls, when the tool is moved over the surface plate, all wear is eliminated from the rolls. Center Dist. of Body Order Reg. Price of Rolls Size Dimensions Number Price Each 5" 1" x 1/2 5-7/8 x 1" x 1" 1291-0066 $62.00 $24.00

SINE GAGEModel 330-050 Determine the angle of an inclined plane to within one minute of a degree (0°01). Perfect for machinists, inspectors & engineers. Base is made of stainless steel. Chrome balls are Grade 25. Order No. 1291-0100 ...........$22.50

Reg. $32.50

ECONOMY 3" SINE BARBlack Oxide FinishFits bottom of vise to accurately set work at desired angle. Set milling machine head, or to T-slots of milling table, swivel vise or angle vise. Sine bar can be mounted on side of vise. Center Dist. of Body Order Price of Rolls Size Dimensions Number Each 3" 3/16 x 27/32 3-15/32 x 3/16 x 1-1/4 1291-0005 $6.95

Sine Bars & Edge Finders

WIGGLER SET Model 599-795Four interchangeable attachments accurately indicate tool-spindle positions relative to ground surfaces, gage blocks, buttons, holes, slots or crossed layout lines. A great convenience in making precise setups. Chrome plated. Set includes: Ball contact attachment (.250" diameter), disc contact attachment (.100" diameter), offset indicator holder, needle point attachment, shank & case.

Order No. 1330-1265 ...................$49.95

ELECTRONIC EDGE SENSOR WITH 20MM R-8 COLLETHigh Sensitivity Probe. 20mm Shank diameter, .393 probe diameter. Includes two batteries.Order No. 1291-0108

$29.00

ELECTRONIC EDGE FINDEREdge finder lights up instantly when stylus reaches the work edge .200" Diameter x 5/8" length. Exact reading off any electrically conductive clean, metal surface. 1/2" Diameter shank, 3-1/4" length. Furnished complete with 1-1/2 volt AAA Alkaline battery and Sylvania #224 bulbs in protective tube.

Order No. 1291-0115 ............................................ $24.95

ELECTRONIC EDGE FINDERSLED lights and audible "beep" activate instantly when ball touches conductive metal. Locates work surfaces quickly & easily. Repeatability +/- .0002 . Precision ground on all surfaces. Easy change 12v battery (included). No bulbs to change. LED lasts for years.

Model No. Desc. Shank Lights Audible Order No. Price4200-B20 .200 stylus 1/2 Yes No 1291-0116 $69.954200-B40 .400 stylus 3/4 Yes YES 1291-0117 69.95

ROUND BAR CENTER FINDERAccurately and quickly locate center on round workpieces. Shaft located in drill chuck or collet center is obtained when pointer lines up with line on short shaft. Made in the USA.

Order No. 1311-9981 $9.95

Single Edge Order No. 1233-1045 ................................... $46.00

MAGNETIC EDGE FINDERSConveniently attaches itself to workpiece with built-in permanent magnet. Precision ground, allows workpieces to be indicated within accuracy of ±.0001". If hole or slot is indicated to centerline of spindle, the edge of workpiece will automatically be on center line. Avoids calculation errors by eliminating additions or subtractions. Slotted model to pick up single edges.


PRECISION EQUIPMENT

E212

Edge Finders

B&S End Order Price Model Style Size Number Each 599-792 Single 1/2" x .500" 1330-1270 $13.70 599-792-1 Double .200 & .500" 1330-1275 17.80 599-792-10 Double 5 & 10mm 1330-1280 38.00 599-792-2 Single 3/8" x .200" 1330-2150 12.90 599-792-4 Double 3/8" x .200" 1330-2155 17.20 Audible Edge Finders 599-792-20 Single 3/8" x .200" 1330-2160 $15.400 599-792-21 Single 1/2" x .200" 1330-2165 16.20 599-792-24 Single 1/2" x .500" 1330-2170 16.20 Edge Finder Set 599-792-9 1/4", 3/8", 1/2", 3/4" 1330-2175 $54.50 Audible Edge Finder Set 599-792-19 1/4", 3/8", 1/2", 3/4" 1330-2180 $63.65

EDGE FINDERS & AUDIBLE EDGE FINDERSLocate round or flat work easily within .0005". Fully hardened and precision ground. To use, just place in a standard 1/2 diameter collet or chuck. As the collet or chuck rotates and approaches the edge of the work, the head moves sideways about 1/32, and the center of the finder is exactly one-half of the head diameter away from the edge of the work. Audible Edge Finders help assure accuracy by releasing an audible click when the tip jumps. This allows the operator to listen as well as watch the tool. Hardened and ground on all working surfaces.

Starrett Order Price Model Description Number Each S828HZ Center Finder, Case, & 4 Attachments 1240-1860 $46.50 828A Shank with Point 1240-2340 19.50 828B Ball Contact Only 1240-2345 5.00

Starrett End Body Contact Order Price Model Style Dia. Dia. Number Each 827A Single .375" .200" 1240-1190 $21.00 827MA Single 10mm 6mm 1240-1197 21.00 827B Double .500" .200" & point 1240-1195 24.50

EDGE FINDERSFor Fast, Accurate Work LocationWork surfaces may be located easily, quickly and accurately with the new Starrett Model 827 Edge Finder. Work with flat straight edges, shoulders, grooves, round work, studs, dowels, or center points and scribed lines - all can be accurately located with this handy tool. Furnished in protective case.

WIGGLER OR CENTER FINDERFour different attachments adapt the tool to countless applications and are readily interchangeable in the wiggler shank. The attachments are snapped into the chuck without removing the collet nut and are clamped by a ball swivel joint which permits adjustment to an angular position. Comes with 4 attachments: Shank with point, .250" ball contact, .100" disc contact and an offset indicator holder. Case included.

WIGGLER OR CENTER FINDERTo accurately find position of tool spindle in relation to work surface, layout lines, holes, slots, etc. Set consists of interchangeable attachments and special chuck and ball contact attachment (.250" dia.), disc contact attachment (.100" dia.). Needle point attachment, offset indicator holder. Supplied in fitted box.

Order No. 1311-9980 ...............$7.95

ELECTRONICOFFSET GAGEHigh Sensitivity Gage1" Shank diameter, 2" length. Fast, accurate measurement of tool vertical height. Use on any type of machine with any type of tool, input tool offset in seconds. Accuracy of 0.0004" from work reference level. Hardened and precision ground. Very safe against overrun. Solid state light system with 360° visibility. Three long life 357 batteries included.Order No. 1291-0110 ........................................................ $124.00

Save on both the Edge Sensor & Offset GageOrder No. 1291-9940 ........................................................ $149.00

ELECTRONIC EDGE SENSORHigh Sensitivity Probe. .750" Shank diameter,.400 probe diameter. Includes two batteries.Order No. 1291-0105 ..................... $37.50

Reg. $84.75 Model End Description Order No. Price 260 Single 1/2 Shank .500 Head 1291-0025 $4.25 262 Double .500 & .200 Head 1291-0030 5.65 263 Single 3/8 Shank .200 Head 1291-0035 4.95 264 Double 1/2 Shank .200 Contact & Point 1291-0060 6.00 4 Pc. Set All Above… 1291-9980 16.00

End Shank Order Reg. Price Type Dia. Description Number Price Each Double 3/8 .200 & .375 tip w/wiggler 1291-0040 $7.25 $6.00 & centering point Single 1/2 .200 tip 1291-0045 7.25 6.00 Single 3/8 w/centering point 1291-0050 6.95 5.50 Single 1/2 w/centering point 1291-0055 6.95 5.50 4 Pc. Set… one of each above 1291-9970 21.50 19.95

6 PC. EDGE FINDER SETQuickly locates working edges, shoul-ders, grooves, center points & scribe lines. All parts hardened & ground. In-cludes one of each listed below.

Order No. 1291-9920

$33.00 End Type Shank Tip Dia. Single 3/8 .200 Single 3/8 10mm Single 10mm 10mm Single 1/2 .200 Double 3/8 CP/.200 Double 1/2 CP/.200

CP= centering point

EDGE/CENTER FINDERSQuickly locates working edges, shoulders, grooves, center points and scribe lines. A time-saving positioning tool. Precision tolerance with all parts hardened and ground.

EDGE/CENTER FINDERS


PRECISION EQUIPMENT

E213

Hole Gages

4 PC. SMALL HOLE GAGE SETFull Ball Type .125-.500The gaging surface is a full ball with a flat bottom permitting use in small shallow holes, grooves and slots. Knurled knob at the end of the handle is for accurate size adjustment. The hole size is then obtained by measuring contact points with a micrometer. Gaging surface is fully hardened to ensure long life.

Order No. 1314-9970 .....................$9.95

Probe Range OAL Depth .125-.200" 3-5/8 .880" .200-.300" 3-7/8 1.200" .300-.400" 4" 1.600" .400-.500" 4" 1.600"

4 PC. SMALL HOLE GAGE SET

in Vinyl CaseHalf Ball Type

Knurled knob at end of handle is used for size adjustment. Hole size obtained by measuring over the contact points with a micrometer. Gaging surface is a full-round with a flat bottom, permits use in smallest of shallow holes, slots and grooves, etc. Gaging surface is fully hardened. Extra long for gaging deep holes, slots and similar work.

Order No. 1314-9980 ................................$9.95Reg. $21.95

SMALL HOLE GAGE SETB&S Model 599-596Range: .125" to .500" (3.18 to 12.7mm). Use like a telescoping gage for measuring small holes, slots and grooves. Flat bottom of half-ball gaging surface permits use in the shallowest recesses. Sensitive knurled knob setting. Entire tool finished in satin chrome to prevent corrosion.

Order No. 1330-1285

$104.50

SMALL HOLE GAGESSeries 154Gaging surface is fully hardened to insure long tool life. Surface is a full-round with a flat bottom; permits use in small shallow holes, slots and grooves, etc. Knurled knob at end of handle for size adjustment. Hole size is obtained by measuring over the contact points with a micrometer.

MTI Order Price Range Model Number Each .118-.197" 154-105 1288-0005 $21.90 .197-.295" 154-106 1288-0010 22.45 .295-.393" 154-107 1288-0015 24.00 .393-.511" 154-108 1288-0020 28.30 4 Pc. Set 154-901 1288-0025 92.50

Starrett Approx. Order Price Model Range Length Number Each 829A .125 to .200" 2-7/8 1240-1780 $28.00 829B .200 to .300" 3" 1240-1785 28.50 829C .300 to .400" 3-3/8 1240-1790 28.50 829D .400 to .500" 3-1/2 1240-1795 29.50 S829EZ Set of 4 (above) in Case 1240-1800 121.00 830A .125 to .150" 2" 1240-1805 28.00 830B .150 to .200" 2" 1240-1810 28.50 830C .200 to .300" 2" 1240-1815 28.50 830D .300 to .400" 2" 1240-1820 29.50 830E .400 to .500" 2" 1240-1825 30.00 S830FZ Set of 5 (above) in Case 1240-1830 154.00 831A .125 to .200" 2-13/16 1240-1835 28.00 831B .200 to .300" 3-1/8 1240-1840 28.50 831C .300 to .400" 3-3/8 1240-1845 28.50 831D .400 to .500" 3-1/2 1240-1850 29.50 S831EZ Set of 4 (above) in Case 1240-1855 107.00

SMALL HOLE GAGESSeries 829, 830, & 831Hardened ball measuring surface with 2-point contact. Smooth, sensitive size adjustment. The contact surface consists of a split ball which is adjusted to size by a knurled knob at the end of the gage. Final size thousandths of an inch is obtained by measuring over the ball contacts with a micrometer. Contacts are hardened for long life and radius is less than the minimum diameter to measured, thus providing 2-point contact.Series 830 & 831 Gages have ball contacts with flat ends permitting shallow slots and recesses to be measured.

MULTI-USE RULE & GAGE Model 16MEPerforms five separate functions. Drill point gage is used for checking 59° angle drill points. Bevel protractor is used for measuring and laying out angles. Center finder locates centers of shafts or circles. Circle divider (up to 9 equal parts) is used for dividing circles into sectors, regular polygons, and polygrams. Tap and drill table shows popular tap sizes with correct drill sizes for National form of thread. Made of stainless steel. 4" Rule has etched graduations in 64ths and millimeters.

Order No. 6800-0075 ...........................................$10.65

THICKNESS GAGE26 feeler blades .0015 to .025, chrome plated.

Order No. 1289-0110

$5.75

BALL AND DIAMETER GAGE Model No. 710 1/8-1"

Check roughing and finishing cutters. Covers almost the entire range of diesinkers' requirements and measures 29 full diameters from 1/8" in steps of 32nds of an inch. Made of tough steel with bright finish. Diameters clearly marked. Approx. size, .050" thick, 1-3/8" wide and 11-3/8" long.

Order No. 1240-3220 ............................................$66.00

STANDARDTHICKNESS GAGES3-5/16 Dia. x No. 10 thickness. Each slot is numbered with decimal equivalent on back. Hardened.

U.S. standard gage for wire, sheet, plate sizes, non-ferrous metalsModel 950-202 Order No. 1289-0005 .........................$17.50U.S. standard gage for sheet steel and plate ironModel 950-203 Order No. 1289-0010 .........................$17.50


PRECISION EQUIPMENT

E214

Model & Leaf Range Order Price Description Thickness Number Each Model 172A .0015, .002, .003, 9-Pieces .004, .006, .008, 1240-1220 $27.50 1/2 x 3-1/32" .010, .012, .015"

.0015, .002, .0025, .003, .004, Model 66 .005, .006, .007, .008, .009, .010, 26-Pieces .011, .012, .013, .014, .015, 1/2 x 3-1/32" .016, .017, .018, .019, .020, 1240-1225 49.00 .021, .022, .023, .024, .025"

Model 66T .0015, .002, .0025, .003, .004, w/tapered .005, .006, .007, .008, .009, .010, leaves .011, .012, .013, .014, .015, 26-Pieces .016, .017, .018, .019, .020, 1240-1227 55.00 1/2-1/4 x 3-1/32" .021, .022, .023, .024, .025"

Model 467 .0015, .002, .003, .004, 13-Pieces .006, .008, .010, .020, .030, 1240-1230 74.00 1/2 x 4-1/2" .040, .075, .100, .200"

Metric Thickness Gages… Model 173MA .03, .04, .05, .06, .07, 13-Pieces .08, .09, .10, .15, .20, 1240-1235 48.50 12.7 x 77mm .30, .40, .50mm

Model 66MA .05, .10, .15, .20, .25, .30, .35, 20-Pieces .40, .45, .50, .55, .60, .65, .70, 1240-2230 49.00 12.7 x 77mm .75, .80, .85, .90, .95, 1.0mm

THICKNESS GAGES

with Locking DeviceStraight leaves, Model 66T has tapered leaves.

TAPER GAGE Model 270 • .010-.150"/0.3-4mmHighly useful tool on bearing work and for gaging slots. The gage is made of quality tool steel 7/16" wide by 6-1/4" long and is accurately tapered throughout it's entire length. One side is graduated from .010"-.150" in thousandths and the reverse side from 0.3-4mm in .05mm.

Order No. 1240-1215 ............................................$94.00

Gages

TAPER GAGEModel 269AFor determining hole size in dies. All sizes are made from spring tempered steel approximately .012" thick and have a locking device which makes it possible to lock any leaf in position. Eight leaves ranging from 1/10 to 1/2" in .001". Length is 2-1/2".

Order No. 1240-1870 .........................................$114.00

RADIUS GAGE SETSSeries 167Satin FinishStainless Steel

Starrett No. of Range With Order Price Model Gages and Radii Holder Number Each S167CZ 24 1/32 to 17/64 x 64ths No 1240-1485 $116.00 9/32 to 1/2 x 32nds S167CHZ 24 1/64 to 17/64 x 64ths Yes 1240-1486 142.00 9/32 to 1/2" x 32nds S167MCZ 21 1mm to 7mm x 0.5mm No 1240-1490 123.00 8mm to 15mm x 1mm S167MCHZ 22 .5mm to 7mm x .05mm Yes 1240-1491 148.00 8mm to 15mm x 1 mm SD167GZ 26 .010 to .025 in .010 incr. No 1240-1489 183.00 .120 to .300 in .020 incr. .350 to .500 in .050 incr. 110 Radius Gage Holder 1240-1492 18.00

Radii or fillets can be checked or laid out easier, and more accurately in any machining, layout, inspection or pattern-making job. Ideal for inspectors, layout men, tool makers, die makers, machinists, screw machine operators, pattern makers and other mechanics. Each size is an individual gage to be used separately for greatest accuracy. Each gage is clearly marked with it's radius and has five different gaging surfaces for both convex and concave radii.

25 PC. RADIUS GAGE SETModel 186-901Set comes with folding pouch and gage handle. Handle and gages are satin chrome finished. Range & Increments: 1/64 to 17/64 by 64ths and 9/32 to 1/2 by 32nds.

Order No. 1286-0025$141.00

25 PC. RADIUS GAGE SETin Folding Pouch Gages are all chrome clad. Range & increments: 1/64 to 17/64 by 64ths and 9/32 to 1/2 by 32nds.

Order No. 1286-0026 .......$19.95 ea. or$18.50 ea./3

Reg. $45.00

26 PC. METRIC RADIUS GAGE SET Model L300MXRange: 5mm-13mm by .5mm increments. Gages are chrome clad stainless steel. Comes with pouch and gage handle.

Order No. 1289-0275 .................. $29.00Reg. $79.00

LARGE 8 PC. RADIUS GAGE SETin Folding PouchChrome clad gages. 9/16" to 1" by 16ths.

Order No. 1286-0030$34.00Reg. $109.00

THREAD MEASURING WIRESAccuracy is .00008". Includes 48 wires in 16 different sizes. Measures all U.S. 60° threads. Laminated conversion chart for 60°.

Order No. 1289-0135 ............................................. $10.95Reg. $13.25


PRECISION EQUIPMENT

E215

CENTER GAGESU.S. Standard 60°. All edges ground. Etched graduations in 14ths, 20ths, 24ths, and 32nds for determining no. of threads.Order No. 1289-0025 .............................................................$5.90Economy Model Order No. 1289-0500 .............................................................$1.95

Radius Gages

18 PC. ANGLE GAGE SET in Vinyl PouchIncludes one of each individual gage. 18 Individual gages manufactured from stainless steel, satin finished. 8 Gaging surfaces per gage. Precision finished edges. Each gage checks the primary, 1/2-primary and complimentary angles. Sharp, cornered workpieces can be checked at all 8 angles except below 50° on primary angle 2. Accurate inspection of angles and ID or OD chamfers—in or out of the machine. Positioning of lathe tools for chamfers. Inspecting angles on ground form tools and cutters. Eliminates time consuming measuring set-ups. Indispensable for every inspector, tool maker, machinist, layout and draftsman.

Order No. 1289-0310 ......................................................$29.00

Angles 1, 2, 3 & 4 .......... PrimaryAngles 5 & 6 .................. ComplimentaryAngles 7 & 8 .................. 1/2-Primary

1/2 Prim. Prim. Comp. Angle Angle Angle *5° 2° 30' 175° *10° 5° 170° *15° 7° 30' 165° 20° 10° 160° 25° 12° 30' 155° 30° 15° 150° 35° 17° 30' 145° 40° 20° 140° 45° 22° 30' 135° 50° 25° 130° 55° 27° 30' 125° 60° 30° 120° 65° 32° 30' 115° 70° 35° 110° 75° 37° 30' 105° 80° 40° 100° 85° 42° 30' 95° 90° 45° 90°*Angle 2 omitted.

METRIC SCREW

PITCH GAGES

Made of tempered steel. 60° thread profiles and locking devices. Model 158M comes with 60° center gage.

No. of Order Price Model Range Leaves Number Each 156M .25 to 2.50mm 28 1240-2235 $35.00 159M 1 to 11.5mm 22 1240-1905 44.00

CENTER GAGE Model C391American National or U.S. Standard 60°. Has threads per inch scale in graduations of 14ths, 20ths, 24ths and 32nds. A table of double depths of threads for determining size of tap drills. Spring tempered steel with satin chrome finish. Gaging surfaces are ground.Order No. 1240-1210 ................$19.50

Model No. of Threads No. Leaves per Inch Description474 28 4-80 4,4-1/2,5,6,7,8,9,10,11,11-1/2,12,13, 14,16,18,20,24,27,28,32,36, 40,44,48,56,64,72,80472 51 4-84 First Corner Leaves: 4, 4-1/2,5,5-1/2, 6,7,8,9,10,11,11-1/2,12,13,14,15,16,18 Second Corner 17 Leaves: 20,22,24,26,27,28,30,32,34,36,38, 40,42,44,46,48,50 Third Corner 17 Leaves: 52,54,56, 58,60,62,64,66,68,70,72,74,76,78,80, 82,84

With locking device and 11-1/2 and 27 Pipe Thread Pitches

Model 474 Order No. 1240-3225 .......$33.50Model 472 Order No. 1240-3230 .......$63.00

FIXED GAGE STANDARDS

29° ACME SCREW THREAD GAGESStandard gage for grinding and setting tools when cutting Acme threads with sides that have an inclination of 14-1/2° (29° incl. angle). Angles & edges are precision ground.

WT Order No. 1289-0320 ................... $8.95USA Order No. 1289-0140 ............... $15.25

Range MTI No. of Locking Convex Order Price (x 64ths) Model Leaves Device Arc Number Each 1/32-1/4 186-101 30 Yes 90° 1286-0005 $40.05 17/64-1/2 186-102 32 Yes 90° 1286-0010 43.75

RADIUS GAGESSeries 186

Check concave & convex radii.

SCREW PITCH GAGENo. 950-253U.S. Standard 60° threads 4 to 84 pitch. Each leaf is narrow enough to measure inside small holes. Note: three locking knurls.

Order No. 1289-0030

$28.85

ACME SCREW THREAD GAGEStainless steel. 16 Leaves : 1, 1-1/3, 1-1/2, 1-3/4, 2, 2-1/2, 3, 3-1/2, 4, 5, 6, 7, 8, 9, 10, 12.Order No. 1289-0145

$39.95SCREW PITCH GAGES

Made of tempered steel. 60° Thread profiles and locking devices. No. of Order Price Range Leaves Number Each .25 to 6mm 24 1289-0040 $2.99 4 to 42 TPI 31 1289-0100 3.99 4 to 84 TPI 52 1289-0315 8.95

No. of Order Reg Price Leaves Range Number Price Each 34 1-3mm x .025 1289-0280 $21.00 $9.95 & 3-7mm x .5 32 7.5-15mm x .5 1289-0285 24.50 11.95

FOLD-UP METRIC RADIUS GAGESGages are chrome clad stainless steel. Made in Japan.

Limited Supply.

4-84 TPI SCREW PITCH GAGEStandard 60° Threads.

Order No. 1289-0090

$11.95

UNIVERSAL GRINDING GAGEStainless steel. Length is 3-3/4". 90° and 120° angles, 55° and 60° notches.

Order No. 1289-0350 ............$3.95


PRECISION EQUIPMENT

E216

Optical Comparators

PH-A14 HORIZONTAL OPTICAL COMPARATOR14" Screen Diameter with Linear Scales Mitutoyo’s lens technology and workmanship combine to provide a bright, crisp image for error free inspection. 8" x 4" workstage incorporates linear scales for fast, accurate measurement. The workstage provides high accuracy and can handle a workload of up to 100 lbs. 10x objective lens and fiber illuminator (is standard accessory* Must choose one display only

SPECIAL CHARTS AVAILABLE, PRICES ON REQUESTOverlay Charts: Model Order Price Number Description Number Each OC-1 Combination grid-radius 1701-2040 $171.00 OC-6 Radius 1701-2045 151.00 OC-2 Grid 1701-2050 151.00 OC-29 Screw thread 1701-2055 151.00 OC-10 Radius-angle 1701-2060 151.00Optional Accessories Model Order Price Number Description Number Each MV14-20X 20X Lens 1701-2005 $883.00 MV14-50X 50X Lens 1701-2010 982.00 MV14-BASE Cabinet base (wgt. 225 lbs.) 1701-2015 880.00 MV14-CTR Stage centers 1701-2020 620.00 RRV-473 Rotary base vise 1701-2025 730.00 MV14-VB V-block 1701-2030 270.00 MV14-RD2 X & Z axis remote LED display 1701-2035 859.00 (includes cables & mfg. bracket.)

Model Order Price Number Description Number Each 172-810A PH-A14 Profile projector 1259-3000 $4,450.00 264-141A QM-Data 200 *1259-3005 1,920.00 174-173A KA Display Counter *1259-3010 475.00 58AAA407A Counter tray 1259-3015 132.00 58ZZA095 Stand 1259-3020 650.00

Reticle #5

OPTICAL COMPARATORSWidely used by machinists, toolmakers, and inspectors for checking angles, thread measurements, hole sizes, etc. Has many uses in the machine shop, tool room, and at the inspection bench. The scaleis photo-etched into the glass reticle which is placed in actual contact with the measured object, thus obtaining simultaneous enlarged images of the scale. Can be used also as a high grade magnifier.

Optical Comparator Order No. Price Ea. 7X with a reticle (#5) 6602-3001 $51.00 10X with a reticle (#5) 6602-3003 74.00

MASTER-VIEW™ 14" OPTICAL COMPARATORComplete and ready to use! Includes: Surface illumination through duplex fiber optics. Digital LCD scales on X and Z axis provide readings to .0005". SPC output from scales that are compatible with most SPC systems. High capacity 4" x 8" travel stage with 4.5" x 19" work surface. Ball way construction handles loads to 100 lbs. 3-Position rotary switch selects profile, surface, or combination surface and profile illumination modes. Single long life tungsten-halogen light source. 10X lens system. Rotary frosted glass screen with 90° crosslines and 360° protractor rim. Vernier readings to 5 min. of arc. Overlay chart clips. Heavy duty monorail type, welded steel frame. Weight is 245 lbs. 48-1/2 L x 22-1/4 W X 34" H.

Order No. 1701-2000

$4,397.00

STEREO MICROSCOPEModel ST531 10X - 45XEyepiece: 10x, 15x. Objective lens: 1x, 2x, 3x. Working distance: 3.15" - 1.88". Field of View: .71" @ 10x, .59" @ 15x. Pupil distance: 2" - 2-3/4. Illumination: Incident/transmitted 220V/110V. Comes with locking wood case.Order No. 6602-0500

$249.00

POCKET MICROSCOPESIlluminted with Focusing WheelFor reading fine print, industrial quality control, fine inspections, textiles, etc. Uses 2 AA batteries (not included).

30X Order No. 6602-0090 ............$9.9560-100X Order No. 6602-0095 ...$14.95

POCKET MICROSCOPEThis powerful microscope is available in 30x and 40x power. Limited Supply.Prefocused with pocket clip.Order No. 6602-3930 MK-32 30x ......... $14.95Order No. 6602-3935 MK-42 40x ......... $15.95

POCKET MICRO STANDThis powerful microscope stand is available in 30x and 40x power. Self-standing with adjustable focus.

MS-30 30xOrder No. 6602-3945$29.95MS-40 40xOrder No. 6602-3950 30.95


PRECISION EQUIPMENT

E217

ACCURSITE™ MAG VISORProvides hands-free magnification for more accurate and effective viewing. Precision dual optical grade acrylic prismatic lens. Can be worn with prescription/safety glasses. Visor shields out unwanted glare. High strength plastic will not break. Includes free AccurLOUPE™ . An attachable lens that adds additional 2X mag. power, easily flips up or down, easily attachable.

Order No. 6633-0070

$26.95

Model No. Magnification Order No. Price Each DA-2 1-1/2X @ 20" 6633-0005 $43.75 DA-3 1-3/4X @ 14" 6633-0010 43.75 DA-4 2X @ 10" 6633-0015 43.75 DA-5 2-1/2X @ 8" 6633-0020 43.75 DA-7 2-3/4X @ 6" 6633-0025 45.50 DA-10 3-1/2X @ 4" 6633-0030 45.50

Monocular Attachable OptiLoupe LP-1 Add 2-1/2X to above 6633-0035 $10.75

The First Choice for Superior Magnification…Made in the USA by Skilled CraftsmanOptivisor is a precision binocular headband magnifier which permits unrestricted user efficiency

Extra Lens PlatesModel No. Order No. Price Each DA-2 6633-0040 $27.50 DA-3 6633-0045 27.50 DA-4 6633-0050 27.50 DA-5 6633-0055 27.50 DA-7 6633-0060 28.85 DA-10 6633-0065 28.85

while reducing eye strain. Leaves both hands free and allows 3-dimensional vision—used by anyone whose profession or craft requires close, accurate work. Can be worn over prescription or safety eyeglasses. Dial adjustable continuous headband is formed to fit the head. A twist of the adjustment dial changes the head size. Sealed-in mechanism is self-locking, trouble-free, & gives the Optivisor better balance for the ultimate in comfort when worn over long periods of time. Conforming headband is made of electrically nonconductive ABS material. It is designed to locate the scope in a natural position. It weighs only about 4 ounces… so light, you won't even know it's there! The Optivisor tilts and pivots: it's at your fingertips and yet, out of the way when not in use. The optical glass lenses are ground and polished to precision optical standards, (with beveled edges and mounted in an interchangeable plastic frame.) Scientifically computed prismatic powers are available for use with any Optivisor. Leather band is padded (with orthopedic felt) for comfort. ABS High impact visor is chemical and flame resistant. Tough, durable material is practically indestructible. The grain finish enhances the attractive and yet, incredibly functional design.

Magnifiers

PROFESSIONAL SERIES SETModel DA-S1Precision hands-free binocular magnifier complete with a set of 6 interchangeable optical glass prismatic lenses, Optiloupe attachment for close-up inspections, and bright Xeon Laser Light. Set includes: DA 0 OptiVisor Headband Magnifier without lens, LP1 OptiLoupe attachment lens that adds 2-1/2 x's for close-up inspections, LT06 VisorLight - Xeon Laser lamp module delivers 6000 candlepower of dependable consistent focused light, and Impact resistant storage box - customed tailored to fit.

Order No. 6636-0080 .....$265.00

Lens Plates No. Magnification Distance LP-2 1-1/2" X at 20" F.L. LP-3 1-3/4" X at 14" F.L. LP-4 2" X at 10" F.L. LP-5 2-1/2" X at 8" F.L. LP-7 2-3/4" X at 6" F.L. LP-10 3-1/2" X at 4" F.L.

OPTISIGHT™ MAG VISORProvides hands-free magnification for more accurate and effective viewing. Precision optical grade acrylic prismatic lens, Includes 3 different lenses 3X, 4X, 5X magnification. Can be worn with prescription/safety glasses. Visor shields out unwanted glare. High strength plastic will not break.

Order No. 6633-0075

$31.25

VO SERIES 36" SCOPE With Internal Halogen BulbModel VO 36-6H FLED• 7400 pixels for clear and detailed image• Tru-threads for precise focusing• Integrated Halogen lighting.• Fuel and chemical resistant materials. • Water and abrasive resistant shafts.• Bending radius down to 3 inches.• Viewing from infinity down to 0.4 inches.• 5.8mm shaft diameterKit includes scope, extra halogen bulb, batteries, storage case and three year warranty.

Order No. 6602-2500

$299.95

NEW! VIDEO BASED INSPECTION SCOPES (Visual Optics)One-year warranty. Visual Optics’ Video Stik, a video based inspection scope, gives you the latest in remote video technology. A must-have tool for the everyday mechanic or for automotive, marine, maintenance, HVAC, home inspection and much more. * High resolution remote color camera with auto-focus * Resolution of 320 by 240 pixels * 2.5-inch full color viewing monitor * Waterproof, flexible, 10-millimeter Staylok shafts * High output LED illumination * Five-hour operation on 4 AA batteries (included) * Mirror and magnet accessories included * Video out for recording (USB interface optional) * Poly pro storage case

36" Order No. 6601-2510 .............. $269.9572" Order No. 6601-2515 .............. $339.00

VT SERIES 36" SCOPE With White LED FlashlightModel VT 36-6 FLED• 7400 pixels for clear and detailed image• Tru-threads for precise focusing• White LED flashlight with 3 wats of penetrating power for optimized viewing.• Fuel and chemical resistant materials. • Water and abrasive resistant shafts.• Bending radius down to 3 inches.• Viewing from infinity down to 0.4 inches.• 5.8mm shaft diameterKit includes scope, flashight, batteries, storage case and three year warranty.

Order No. 6602-2505

$329.95

The “State of the Art”

for Inspection!


PRECISION EQUIPMENT

E218

ILLUMINATEDMAGNIFIERML 7715L3" diameter lens. 5-1/2" long handle, 3 power. Uses two "C" batteries (not included).

Order No. 6602-3575 ...................................................$7.95

OBLONG MAGNIFYING READING GLASSModel 548Powerful ground and polished glass lens. Lens is 2" x 4" with 1.25 power magnification. Plastic frame and ribbed handle. Power: 1.25, Focal Length: 8".

Order No. 6800-0120 ...............................$19.95

Magnifiers

OBLONG, ILLUMINATED

MAGNIFIERModel 565 /Bifocal

Lens Measures 2" x 4" for distortion free magnification of large areas. Reversible light reflector adapts for right or left hand use. 2.5 power shatterproof lens, with 5 power bifocal insert. Replaceable bulb and batteries are included. No.565: Power: 2.5 Focal Length: 4" Bifocal: Power: 5.0 Focal Length: 2"

Order No. 6800-0125 .............................................$30.30

SPECTACLES MAGNIFIER Adjustable clip on magnifier lens for glasses.

HF-20A 2x Power MagnifierOrder No. 6602-3955 .......................$18.95HF-20C 3x Power MagnifierOrder No. 6602-3965 .......................$19.95HF-A1 2x Interchangeable ReplacementsOrder No. 6602-3975 .........................$8.95HF-C1 3x Interchangeable ReplacementsOrder No. 6602-3985 .........................$9.95

ECONOMY EYE LOUPESLenses are made of clear ground & polished optical glass for sharp images with minimum eye fatigue. Black plastic body. Power Focus inch Order no. Price 4X 2-1/2 6602-3010 $2.50 5X 2" 6602-3005 2.70 10X 1-1/2 6602-3000 3.60

ROUND DESK MAGNIFIER5-3/8" dia. 1-1/2" High Clear Stand. 2-1/4" Overall Height

Order No. 6605-3700 ...................$9.95

OBLONG MAGNIFIER2" x 4". Ground & polished lens. Plastic frame. 1.25 @ 8".

Order No. 6602-0525

$5.95

FOLDABLE LENS MAGNIFIER2 Power, 4" dia. Stands 7-1/2" H. 5-1/4" x 7-1/2" Base. Inch and metric scale on base.

Order No. 6602-3705 ..............$7.95

ROUND MAGNIFIERMH 2117-44" diameter. 3 Power. 4" Handle.

Order No. 6602-3710

$6.45

3.3 POWER EYE LOOPwith Spectacle FrameEasily attaches to the side of any pair of glasses. Magnifier pivots out of the way when not in use.

Order No. 6602-3720

$9.95 3 POWER MAGNIFIERWITH ADJUSTABLE TWEEZERS Stainless steel body. 2-1/4" long and adjusts 45°, 3-3/4" overall length.

Order No. 6602-3730 ............................$3.00

READING GLASSES2" x 1-3/16 lens. With metal frame

Power Order No. Price 1.5 6602-3577 $1.95 2 6602-3578 1.95 2.5 6602-3579 1.95 3 6602-3580 1.95


PRECISION EQUIPMENT

E219

HELPING HAND WITH MAGNIFIERHeavy duty cast iron base. Six ball joints allow for adjustment at any angle. Alligator style spring clips. 2-1/2 polished magnifier glass.

Order No. 6605-2280

$8.95

Telescoping Mirrors

FOLDING MAGNIFIERSBlack high impact plastic.1-7/8" dia. 3-1/2" L (closed) 6-1/4" L (open). 1-1/4" W. 6 Power.

Order No. 6602-3725 .................................................$6.95

TELESCOPING INSPECTION MIRROR2" diameter mirror. Chrome plated. 7" long fully retracted, extends up to 24" long. Swivel ball joint for multi-angle positioning. Vinyl cushion grip handle.

Order No. 6605-3380 ................................................. $4.952" diameter mirror. Chrome plated, steel construction. Multi-angle swivel ball joint. Holds firmly ant any angle. Telescopes from 8" to 13". PVC grip handle. Swivel ball joint for multi-angle positioning. Vinyl cushion grip handle.

Order No. 6605-3395 ................................................. $3.50

3 PC. TELESCOPING "SPEED-CHUCKTM" INSPECTION SETModel 759903Includes: 26" stainless steel telescoping wand with Speed-Chuck™ handle, 2 lb. Magnetic Pick-up, 1-1/2" Round Lexan® mirror, Mini-Lite, plus Batteries included. Precision engineered 750 series Versa-Grip™ handle for maximum performance.

Order No. 6800-0760 ..............................................$28.80

2-1/2" ROUND TELESCOPING 3X POWER MAGNIFYING MIRROR

Model 759563For the inspection of obstructed and hard to see objects. High quality 2-1/2"(64mm) diameter magnifying glass mirror improves visibility. High strength corrosion resistant stainless steel wand extends from 8-1/2" to 29" (216mm-737mm). Precision engineered 750 series Versa-GripTM handle for maximum performance.

Order No. 6800-0750 .............................................$11.95

1-1/2" ROUND LEXANTM TELESCOPING MIRROR

Model 759575For the inspection of obstructed and hard to see objects. High performance 1-1/2" (38mm) diameter LexanTM mirror resists scratching and shattering. High strength corrosion resistant stainless steel wand extends from 7-5/8" to 28" (194mm-711mm). Precision engineered 750 series Versa-GripTM handle for maximum performance.

Order No. 6800-0755 ...............................................$10.60

TELESCOPING INSPECTION MIRROR

Model No. 560These mirrors facilitate inspection of inaccessible workpieces and machines by toolmakers, assemblers, inspectors, and mechanics. Fully polished mirrors are enclosed in plated holders which are attached to knurled handles with ball and socket joints. Features vinyl cushion grip handle. Overall length 11-1/2 extends to 16". Mirror size 3-1/2 x 2" oblong.

Order No. 6800-0205 ........................................$10.05 ea.

DOUBLE FOLDING MAGNIFIERwith two Loupes10X & 20X magnification. Lens dia: 10X power 18mm, 20X power 12mm

Order No. 6602-3760

$7.95

TELESCOPING INSPECTION MIRRORTelescopes 15-1/4". 360° Mirror swivel.

Order No. 6602-5205 ... $5.95 Ea. $5.25 3 or more


PRECISION EQUIPMENT

E220

METAL ETCHING PENUse on heavy metals, stainless steel, iron, copper, brass, nickel, tin, lead. A special acid solution flows like ink in a felt-tip pen. Leaves distinctive, smudge-proof, black markings.

Order No. 1289-0330 ...............$9.95

GLASS CUTTER#2 Diamond Point. 7" long

Order No. 6602-3140 ............$4.50

SCRIBER & MAGNETModel 88CM Tungsten Carbide

Tungsten carbide tip marks hard materials including hardened steel, ceramics and glass. Alnico permanent magnet picks up small parts and retrieves steel chips from hard to reach places. Scriber point reverses for safety.

Order No. 6800-0025 ...............$6.55Model 88P Replacement Point:Order No. 6800-0030 ...............$2.80

ALL AMERICAN POCKET PROTECTOR TOOL KITModel S008 Designed for the mechanic, machinist or hobbyist. Contains four of General's best selling tools: No. 300 6" rule, No. 383X telescoping magnetic pick-up, No. 87 automatic center punch & No. 88 scriber. Packaged in vinyl pocket protector that can be snapped closed. Pocket flap is imprinted with a full color American flag.

Order No. 6800-0265 .............$29.50

POCKET SCRIBERSSeries 70 Steel Point Handle Point Order Price Model Dia. Lgth. Number Each 70A 1/4 2-3/8 6525-0080 $8.70 70B 3/8 2-7/8 6525-0085 11.00 Point for 70A… 6525-0090 2.60 Point for 70B… 6525-0095 3.30

Scribers

STAINLESS STEEL TWEEZERSChrome Plated4-1/2 Order No. 6602-0055 ......$1.507" Order No. 6602-0060 ...........$2.00

4 PC. TWEEZER SETStainless steel tweezers. Includes self closer, curved, sharp point, and stamp. Complete with vinyl pouch.

HEMOSTATSExcellent for soldering small parts. Useful hobby and craftsmen’s tool.

Tweezers

With Telescoping MagnetExtends from 6" to 26". Hardened scriber for marking metal, wood, etc. Plus pocket clip.

Order No. 6612-0300 ................... $5.95

With Scraper6-1/2 long. Hardened steel, knurled handle, 1/2 wide scraper.

Order No. 1249-0095 ................... $1.95

Double End SteelTempered steel points. Handle & points have knurled grip. Bent and straight points. 8-7/8 OAL.

Order No. 1249-0030 ................... $1.95

Carbide Tipped with Magnet5-3/4 OAL, with magnet and pocket clip.

Order No. 1249-0155 ....................$1.95

Single End SteelStraight, with knurled handle. Total length: 6-3/4.Order No. 1249-0200 ...........................$1.50

Economy Tungsten Carbide Point

For scribing, marking, or engraving on hard steel, glass, plastics, ceramic, jewelry, etc. Screw chuck permits reversing point when not in use. 6" OAL with pocket clip.

Order No. 1249-0010 ................... $3.95Reg. $4.50

TUNGSTEN CARBIDE TIP SCRIBER

Model No. 88Marks stainless steel, copper, ceramics, and glass. Screw chuck for reversing tungsten carbide point when not in use. Tip is replaceable. Measures 6" overall. Uses replacement point 88P (listed above)

Order No. 6800-0026 ............... $5.35

FIXED TWO POINT SCRIBERModel No. 80C

Hardened and ground steel needle points are fixed to a knurled body. Has one point and one bent point.

Order No. 6800-0625 ............$3.65

Order No. 6636-0045 ................ $8.50

Order Price Size Type Number Each 5-1/2 Straight 6603-0005 $3.95 5-1/2 Curved 6603-0010 3.95 7-1/4 Straight 6603-0015 5.95 7-1/4 Curved 6603-0020 5.95 9" Straight 6603-0025 6.95

Scribers & Tweezers

159-220 Precision.indd - Havoger Group

Documents

Transcript of 159-220 Precision.indd - Havoger Group