Nntn7348a En
-
Upload
ganiza-long -
Category
Documents
-
view
218 -
download
0
Transcript of Nntn7348a En
-
7/30/2019 Nntn7348a En
1/112
-
7/30/2019 Nntn7348a En
2/112
-
7/30/2019 Nntn7348a En
3/112
IMPORTANT NOTICE: PLEASE READ
PRIOR TO USING YOUR PHONEThe SIM card provided in this kit is intended for usewith the phone provided in this package.
Loss of certain features will result when using a SIM
card from one of the following models: i30sx, i35s,i50sx, i55sr, i58s, i60c, i80s, i85s, i88s, i90c, i95clseries, and the i2000 series.
For more information on SIM card compatibility, go to
www.motorola.com/iden.
Defects or damage to your Motorola phone that result
from the use of non-Motorola branded or certifiedAccessories, including but not limited to replacementhousings and or other peripheral accessories, areexcluded from warranty coverage. Please refer to thetext of Motorola's Limited One Year warranty locatedin this users guide for complete details.
-
7/30/2019 Nntn7348a En
4/112
-
7/30/2019 Nntn7348a En
5/112
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.Address: 8000 West Sunrise BoulevardPlantation, FL 33322 USAPhone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i335
Model Number: H98XAH6JR5AN
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a),
15.107(d) and section 15.109(a)Class B Digital Device
As a personal computer peripheral, this devicecomplies with Part 15 of the FCC Rules.
Operation is subject to the following twoconditions: (1) this device may not cause
harmful interference, and (2) this device mustaccept any interference received, includinginterference that may cause undesired
operation.Note: This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to part 15 of theFCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interferencewill not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television reception,which can be determined by turning theequipment off and on, the user is encouraged totry to correct the interference by one or more ofthe following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technicianfor help.
-
7/30/2019 Nntn7348a En
6/112
-
7/30/2019 Nntn7348a En
7/112
1
HELLOMOTO
Introducing your new Motorola i335 phone. Heres a quick anatomy lesson.
On/Off/Home
Key
PTT Button
Audio Jack
Volume Keys
Speakerbeneathkeypad
USB Connector
Internal Antennalocated here
Speaker Key
Microphonebeneath keypad
Left Soft KeyPerform function
in lower leftdisplay.
Talk Key
Make &answer calls.
Menu KeyFrom home screen,
open main menu.
4-WayNavigation Key
Right Soft KeyPerform functionin lower right
display.
Power/Home/End KeyEnd calls, exit menu
system.
OK KeyIn menus & lists,press to selecthighlighted option.
-
7/30/2019 Nntn7348a En
8/112
2
check it out
up, down, left or right ( )
1
2 Customizable O key
to open theSettings screen
Press and hold the
Power Key for afew seconds, or until
the screen lights up,
to turn on your phone.
3
4 Press theO keyto select.
Press the Navigation Key
to highlight a menu feature.
Home Screen Main Menu
that can be usedMore Exit
Main Menu
T u
L
D
q
0 g
lP
-
7/30/2019 Nntn7348a En
9/112
3
Motorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196
www.hellomoto.com
1-800-331-6456 (United States)1-888-390-6456 (TTY/TDD United States for hearing impaired)1-800-461-4575 (Canada)
Product Support:
www.motorola.com/iden
Certain mobile phone features are dependent on the capabilitiesand settings of your service providers network. Additionally,certain features may not be activated by your service provider,and/or the provider's network settings may limit the features
functionality. Always contact your service provider about featureavailability and functionality. All features, functionality, and otherproduct specifications, as well as the information contained in thisuser's guide are based upon the latest available information andare believed to be accurate at the time of printing. Motorolareserves the right to change or modify any information or
specifications without notice or obligation.This device supports Bluetooth 1.2 and HS/HF/OPP/DUN/BPPprofiles. In order for Bluetooth devices to communicatewithone another, they must utilize the same Bluetooth profile. Todetermine the profiles supported by other Motorola devices, visitwww.hellomoto.com/bluetooth. For other devices, contact their
respective manufacturer.
Certain Bluetooth features including those listed may not besupported by all compatible Bluetooth-enabled devices, and/or thefunctionality of such features may be limited in certain devices, orby certain wireless carriers. Contact your wireless carrier about
feature availability and functionality.
Caution: Changes or modifications made in the radio phone, notexpressly approved by Motorola, will void the user's authority tooperate the equipment.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. All other product or service names arethe property of their respective owners. Java and all other Java-based marks are trademarks or registered trademarks of SunMicrosystems, Inc. in the U.S. and other countries.
Motorola, Inc., 2007.
Manual Number: NNTN7346A
Software Version: D7F.00.37
CP Version: 6A.00.00
USR Version: U7FA.32.02
Electrical Requirements:Lithium Ion Battery 3.7V
Power Adapter: 100-240V ~ 50-60Hz, 0.3A
Output of the Adapter: 5V 850mA
http://www.motorola.com/iden/supporthttp://www.motorola.com/iden/support -
7/30/2019 Nntn7348a En
10/112
4 contents
contents
check it out . . . . . . . . . . . . 2menu map . . . . . . . . . . . . . 6Use and Care. . . . . . . . . . . 8essentials . . . . . . . . . . . . . 9
about this guide . . . . . . 9SIM card . . . . . . . . . . . 10battery . . . . . . . . . . . . . 10turn it on & off . . . . . . 14enable security . . . . . 15
make phone a call . . . 15answer phone a call . 15make a private call . . 15answer a private call 16store a phone number or
private ID . . . . . . . . . . 16call a stored phone number orprivate ID . . . . . . . . . . 17your phone number andPrivate ID . . . . . . . . . . 18text messages . . . . . . 18
using your handset as amodem . . . . . . . . . . . . 23
main attractions . . . . . . 24PTV features . . . . . . . 24
one touch PTT. . . . . . 30PT manager . . . . . . . . 31MMS. . . . . . . . . . . . . . 32bluetooth . . . . . . . . . . . . . . . 46
basics . . . . . . . . . . . . . . . 51
display . . . . . . . . . . . . 51text entry . . . . . . . . . . 52volume . . . . . . . . . . . . 54navigation key . . . . . . 55handsfree speaker . . 55transmitters . . . . . . . . 55use GPS with map software 56
calls . . . . . . . . . . . . . . . . . 58recent calls . . . . . . . . 58redial. . . . . . . . . . . . . . 59voice names . . . . . . . 59caller ID . . . . . . . . . . . 60
call forward . . . . . . . . 60emergency calls . . . . 61international calls . . . 61speed dial . . . . . . . . . . 62
turbo dial . . . . . . . . . . . 62voice mail . . . . . . . . . . 63selective dynamic group (SDG)calls . . . . . . . . . . . . . . . 63
customize. . . . . . . . . . . . . 68
ring tones . . . . . . . . . . 68wallpaper . . . . . . . . . . 69backlight . . . . . . . . . . . 70datebook . . . . . . . . . . . 70hide or show locationinformation . . . . . . . . . 71
other features . . . . . . . . . 72advanced calling . . . . 72contacts . . . . . . . . . . . 73datebook . . . . . . . . . . . 73GPS . . . . . . . . . . . . . . . 74
handsfree . . . . . . . . . . 75
-
7/30/2019 Nntn7348a En
11/112
5contents
personalize . . . . . . . . . 76pc applications . . . . . 76TTY. . . . . . . . . . . . . . . . 76
security . . . . . . . . . . . . 77Safety and General Information80Service & Repairs . . . . . 85Specific Absorption Rate Data 86
Limited Warranty Motorola Com-munications Products (Interna-tional) . . . . . . . . . . . . . . . . 88Hearing Aid Compatibility 92Information From the World
Health Organization. . . . 94Patent and Trademark Informa-tion . . . . . . . . . . . . . . . . . . 96Privacy and Data Security 97Smart Practices While Driving 98
Index. . . . . . . . . . . . . . . . 100
-
7/30/2019 Nntn7348a En
12/112
6 menu map
menu map
main menup Call AlertL Java Apps.
Java System
u Settings (see next page)
t Ring Tones Vibrate All: On/Off Ringer Vibrate Silent
c GPS Position Privacy
InterfaceP Call ForwardD Datebookl Memo1 NetJ My Info
My Name Line 1 Line 2 Private ID Group ID:: Carrier IP IP1 Address IP2 Address Circuit Data
0 VoiceRecord [New VoiceRec]
B Recent Calls
K Shortcuts [New Entry]
1)Shortcuts 2)Cntcs[New Contact] 3)Recent Calls 4)Contacts 5)Datebook 6)Messages 7)VoiceRecord 8)Net 9)Call Forward
A Contacts [New Contact] [New SDG List]
L Quick PTT PTT: Contacts
o Profiles
M Call Timers Last Call Phone Reset Phone Lifetime Prvt/Grp Reset Prvt/Grp Life Circuit Reset Circuit Lifetime Kbytes Reset
N PT Manager Quick PTT Send Message Send Picture Send Event Send My Info Send Contact Configure
E Messages [Create Message]
[Create Txt Msg] [Create MMS Msg]
Voice Mail Inbox Drafts
Sent Items Net Alert
O My PicturesC Bluetooth
Hands Free Link to Devices Device History Setup Find Me
This is the standard Main Menu layout.Your phones menu may be a littledifferent.
-
7/30/2019 Nntn7348a En
13/112
7menu map
settings menuDisplay/Info
Wallpaper Text Size Theme Home Icons Backlight Clock Menu View Large Dialing Language
Phone Calls
Set Line Any Key Ans Auto Redial Call Waiting Auto Ans Minute Beep Call Duration TTY Notifications DTMF Dialing Prepend
2-Way Radio Tkgrp Silent Tkgrp Area One Touch PTT Alert Type PTT Quick Notes On/Off PTT Store Rcvd Info
Personalize Menu Options Up Key
Down Key Left Key Right Key Center Key Left Sftkey Right Sftkey Power Up
Volume
Line 1 Line 2 Messages Earpiece Speaker Keypad Java Earpiece Java Spkr Data
Security Phone Lock Keypad Lock SIM PIN GPS PIN Change Passwds
Advanced Alert Timeout Headset/Spkr Connectivity Reset Defaults
Return to Home Transmitters Phone Only Baud Rate
-
7/30/2019 Nntn7348a En
14/112
8 Use and Care
Use and Care
Use and Care
To care for your Motorola phone, please keep it away from:
liquids of any kind dust and dirt
Dont expose your phone towater, rain, extreme humidity,sweat, or other moisture.
Dont expose your phone to dust,dirt, sand, food, or otherinappropriate materials.
extreme heat or cold cleaning solutionsAvoid temperatures below-10C/14F orabove 45C/113F.
To clean your phone, use only a drysoft cloth. Dont use alcohol orother cleaning solutions.
microwaves the ground
Dont try to dry your phone in amicrowave oven.
Dont drop your phone.
-
7/30/2019 Nntn7348a En
15/112
9essentials
essentials
Caution: Before using the phone for the firsttime, read the Important Safety and Legalinformation included in the gray edged pagesat the back of this guide.
about this guideThis guide shows how to locate a menu
feature as follows:Find it:M>Settings.
This means that, from the home screen:
1 Press the menu buttonM to open theMain Menu.
2 Press the navigation key to scroll toSettings.
3 Press the center keyO to select it.
symbols
This means a feature is network/subscription dependent and maynot be available in all areas. Contactyour service provider for moreinformation.
This means a feature requires anoptional accessory.
-
7/30/2019 Nntn7348a En
16/112
10 essentials
SIM card
insert the SIM cardTurn off your phone and remove your batterybefore you install or remove a SIM card.
Carefully slide the SIM chip into your phone,
until it lies flat in the SIM chip holder.
Warning: To avoid loss or damage, do notremove your SIM chip from your phoneunless absolutely necessary.
battery
Battery Use & Battery Safety
Motorola recommends you alwaysuse Motorola-branded batteries andchargers. The warranty does not coverdamage caused by non-Motorolabatteries and/or chargers. Caution: Useof an unqualified battery or chargermay present a risk of fire, explosion,leakage, or other hazard. Improper
battery use, or use of a damagedbattery, may result in a fire, explosion,or other hazard.
Battery usage by children should be
supervised.
-
7/30/2019 Nntn7348a En
17/112
11essentials
Important: Motorola mobile devices aredesigned to work best with qualifiedbatteries. If you see a message on your
display such as Invalid Battery or Unable toCharge, take the following steps:
Remove the battery and inspect itto confirm that it bears a Motorola
Original Equipment hologram; If there is no hologram, the battery
is not a qualified battery;
If there is a hologram, replace the
battery and retry charging it; If the message remains, contact a
Motorola Authorized ServiceCenter.
New batteries or batteries stored for along time may take more time tocharge.
Charging precautions: Whencharging your battery, keep it near
room temperature. Never exposebatteries to temperatures below 0C(32F) or above 45C (113F) when
charging. Always take your mobiledevice with you when you leave yourvehicle
When storing your battery, keep it in a
cool, dry place. It is normal over time for battery life to
decrease, and for the battery to exhibitshorter runtime between charges or
require more frequent or longercharging times.
Avoid damage to battery and mobiledevice. Do not disassemble, open,
crush, bend, deform, puncture, shred,or submerge the battery or mobiledevice. Avoid dropping the battery ormobile device, especially on a hardsurface. If your battery or mobile
device has been subjected to such
-
7/30/2019 Nntn7348a En
18/112
12 essentials
damage, take it to a MotorolaAuthorized Service Center beforeusing. Donotattempt to dry it with an
appliance or heat source, such as a hairdryer or microwave oven.
Use care when handling a chargedbattery: Particularly when placing it
inside a pocket, purse, or othercontainer with metal objects. Contactwith metal objects (e.g., jewelry, keys,beaded chains) could complete anelectrical circuit (short circuit), causingthe battery to become very hot, whichcould cause damage or injury.
Promptly dispose of used batteries inaccordance with local regulations.Contact your local recycling center forproper battery disposal.
Warning: Never dispose of batteries in afire because they may explode.
battery installation
1 Slide the release button back until it
releases the battery door.
2 Remove battery door.
3 Insert battery as shown below. Pushthe battery down until it snaps in place.
-
7/30/2019 Nntn7348a En
19/112
13essentials
battery chargingNew batteries are not fully charged.
charge using the charger
1 Pull out the connector cover, and insert
the charger into the accessory connectoron your phone as shown.
2 Plug the other end of the charger into theappropriate electrical outlet.
When you charge the battery, the batterylevel indicator at the upper right of the screenshows charging progress. At least onesegment of the indicator must be visible toensure full phone functionality while charging.
charge from your computer
You can partially charge your phonesbattery by connecting a Motorola-approvedUSB cable from your phones mini-USB port
to a high power USB connector on acomputer (not a low-power one, such as theUSB connector on your keyboard or bus-powered USB hub). Typically, USB high-
power connectors are located directly on yourcomputer.
Note: The phone will be charged at a slowerrate than it is charged with the rapid charger.
4 Replace the battery door.
-
7/30/2019 Nntn7348a En
20/112
14 essentials
Your computer must be turned on, and youmust have correct software drivers installedon your computer. If the Phone is off when
the USB cable is connected between thecomputer and the phone, the phone willpower up in charging mode. This mode allowsthe phone to charge fastest and quickest.
Note: If the battery is very low, the phone willnot turn On, but it will continue to charge at alow rate. The phone will power up in chargingmode when the battery has been charged toapproximately 5% of its capacity. For fastercharging under a very low battery condition, itis recommended to use the rapid chargersupplied with the handset.
If the phone is turned on while charging from
a computer, it will not fully charge the battery.In this case, the battery charge will bemaintained approximately between 80% and95% of the battery's capacity. Cables and
software drivers are available in MotorolaOriginalTM data kits, sold separately.
Tip: Motorola batteries have circuitry thatprotects the battery from damage fromovercharging. Of course, unplugging thecharger from the wall will prevent the batteryfrom overcharging.
turn it on & offTo turn on your
phone, pressand holdE for afew seconds oruntil the displayturns on.
To turn off your phone, press and holdE fortwo seconds.
Note: If you pressE for more than fourseconds, the handset will power On on
-
7/30/2019 Nntn7348a En
21/112
15essentials
Transmitter Off mode. See transmitterson page 55.
enable securityYou must enable security the first time youpower on you phone or within 10 days of first
activation.1 Pressa under Ok.
2 Your are prompted to enable security.Pressa under Yes. A series of screens
followed by the default home pagedisplays.
3 PressO to return to the home screen.
make phone a callEnter a phone number and pressS to makea call or use a voice name. See voicenames on page 59.
Note: For best call quality avoid covering theinternal antenna with your hand.
To hang up pressE.
answer phone a call
When your phone rings and/or vibrates, you
have the following options to answer:1 If you want to answer the call on the
handsfree speaker phone, press thespeaker keys.
2 If you want to hear the audio through theear speaker, pressS.
To hang up pressE.
make a private callWith Private calls service, you use your phoneas a long-range, digital 2-way radio using one-
-
7/30/2019 Nntn7348a En
22/112
16 essentials
to-one Private calls or one-to-many groupcalls.
Your Private ID is the number at which youreceive one-to-one Private calls.
Talkgroup numbers are numbers throughwhich you receive one-to-many group calls.
1 To make a private call enter the Private IDyou want to call.
2 Press and hold the PTT button. Begintalking after your phone emits a chirping
sound.3 Release the PTT button to listen.
To end the call pressO.
A Private call ends automatically if there is
no activity on the call for a few seconds.Tip: To let someone know you want to talk tothem on a Private call, pressa under Alert.
answer a private call
1 When your phone emits a chirping sound
or vibrates to indicate you are receiving aPrivate call, wait for the caller to finishspeaking.
2 Press and hold the PTT button and begin
talking after your phone emits a chirpingsound.
3 Release the PTT button to listen.
To end the call pressaunder Exit.
store a phone numberor private ID
You can store a phone number or Private ID inContacts:
1 PressM > Contacts > [New Contact].
-
7/30/2019 Nntn7348a En
23/112
17essentials
2 Enter a name for the new entry. Eachentrys name can contain up to 20characters.
3 Select Ring Tones if you wish to assign aspecific ring tone to that phone number.
4 Select a type for the entry (Mobile, Work1,Work2, Home, Fax, Pager, or Other). To store aPrivate ID, choose Private.
5 Enter the number for the entry and pressa under Done to save the entry.
Tip: Before saving the entry, you can savemore information. You can store E-mailaddresses, IP addresses, or Talkgroup IDs.You can assign each number a speed dialnumber and voice name. You can also create
Contact entries that are groups of Private IDscalled Group IDs and/or SDG lists.
After you have saved the number, the newContacts entry is displayed.
call a stored phonenumber or private ID
Shortcut: From the home screen pressaunder Contcs
or
Find it:M > Contacts1 Scroll to the Contacts entry.
Tip: By pressing the first letter of thename of the Contacts you want, you will be
taken to all the contact names startingwith the letter you pressed.
2 If the Contacts entry contains more thanone number, scroll left or right until the
type of the number you want to call isdisplayed (Mobile, Private, Work1, Work2, Home,etc.).
3 If you choose a phone number, pressS
to call the entry.
-
7/30/2019 Nntn7348a En
24/112
18 essentials
or
If you choose a Private ID, Talkgroup ID,or SDG List, press and hold the PTTbutton to call the number.
Tip: If the Contacts entry you scrolled tocontains a Private ID, you can make an instantPrivate call to that Private ID by pressing andholding the PTT button, even if the Private IDis not the type of number displayed.
your phone number andPrivate ID
Find it:M > My Info
Tip: Want to see your phone number orPrivate ID while youre on a call? PressM >My Info.
text messages
If your service provider offers text messaging,
your phone sends text messages usingMobile Originated Short Messaging Services(MOSMS) and receives text messages fromother phones that are using MOSMS.
set it up
Before you begin using text messaging, youmay need to set up your signature, servicecenter number, and expiration information.
Shortcut: From the home screen pressaunder Msgs >M > Text Msg Setup.
or
Find it:M > Messages >M > Text Msg Setup.
-
7/30/2019 Nntn7348a En
25/112
19essentials
The following options become available:
Pressa under Done to save the informationyou entered.
option
Signature: Enter your signature (up to 11characters long).
Delivery Rpt: Set this option to On if you wantyour phone to show you when the
message has been delivered.Srvc Cntr No: Enter the phone number of yourservice center. If you do not know thisnumber, contact your service provider.
Expire After: This is the amount of timemessages you send are saved at theservice center if they cannot be delivered.After this period, they are discarded.
Scroll to select the number of days youwant your messages to be saved.
Auto Clean Up: Set this option to On if you want
your phone to delete sent messages.If you set Auto Clean Up to On, select Clean Up Afterto set the number of days after which sentmessages are deleted or the number ofmessages to be kept.
Quick Notes: Quick notes are short, pre-writtentext messages that you can create, edit,and send in your text messages. You canstore up to 20 quick notes. A quick note
may be up to 30 characters long.You can create a [New Note] or pressaunder Editto change the pre-written quicknotes.
option
i d If h fill
-
7/30/2019 Nntn7348a En
26/112
20 essentials
receive a text message
1 To view the message pressa under Read.
2 To dismiss the message notification pressa under Exit.
Note: If your phone is powered off when youreceive a text message, your phone notifies
you the next time you power it on. If you areout of your coverage area, your phone alertsyou when you return to your coverage area.
Tip: While reading a text and numeric
message that contains a phone number, youcan pressS to call that number.
read from the message center
1 From the home screen pressa
underMsgs > Inbox > Text Inbox.
2 Select the message you want to read orpress the number of the message you
want to read. If the message fills morethan one screen, scroll to read it.
Tip: Scrolling through one message letsyou view the next message.
3 To reply to the message, pressa underReply or to see all other choices, includingforwarding and deleting the message,calling the sender, or storing the sendersnumber in Contacts, pressM.
create and send text messages
1 From the home screen pressa underMsgs > [Create Message] > [Create Txt Msg].
or
Select Inbox > Text Inbox, or Outbox > Text Outbox,or Drafts > Text Draft.
2 To address the message use the keypadto enter the phone number of the personyou want to send the message to and
pressO.
Sh t t F th h a
-
7/30/2019 Nntn7348a En
27/112
21essentials
or
Pressa under Browse, and select RecentCalls, Contacts or Memo to find the number youwant.
3 Select Msg: and enter the text of themessage or to use a quick note pressaunder Browse and scroll to the quick noteyou want.
4 PressM > Set Send Method and select Text,Fax,x400, Paging, Email, ERMES, or Voice.
5 If you want to send the message, pressa under Send or to delete the messagewithout sending it, pressa under Cancel.
Note: If you want to request confirmationof delivery pressM > Delivery Report> On.
use drafts
When you save a message as a draft, it issaved in the drafts folder.
Shortcut: From the home screen pressaunder Msgs > Drafts > Text Draft.
1 Select the draft you want to edit. You alsohave the choice to create new textmessages from this menu.
2 To edit the fields you want to change,follow step 2 through step 5 in createand send text messages above.
resend text messages
Shortcut: From the home screen pressa
under Msgs > Outbox > Text Outbox.1 Scroll to the message you want to resend
or press the number of the message youwant to resend.
2 Pressa under Resend.
delete sent te t essages The te t inbo holds 20 essages If the te t
-
7/30/2019 Nntn7348a En
28/112
22 essentials
delete sent text messages
Shortcut: From the home screen pressa
under Msgs > Outbox > Text Outbox.1 Scroll to the message you want to delete.
2 Pressa under Delete.
3 Pressa under Yes to confirm.
delete all unlocked sent messages
Shortcut: From the home screen pressaunder Msgs > Outbox > Text Outbox.
1 PressM > Delete All.2 Pressa under Yesto confirm.
manage memory
Your text inbox, outbox, and drafts folder havea set amount of memory available for storingmessages.
The text inbox holds 20 messages. If the textinbox is full, you cannot receive messagesuntil you delete some.
The outbox and drafts folder share memoryspace. Togheter they can hold 30 messages.If the outbox and drafts folder memory is full,you cannot send messages or save drafts
until you delete some.To view the amount of memory available inyour text inbox:
Shortcut: From the home screen pressa
under Msgs >M > Text Msg Setup > Mem Mtr-Inbox.To view the amount of memory available inyour outbox and drafts folder:
Shortcut: From the home screen pressaunder Msgs >M > Text Msg Setup > Mem Mtr-Other.
using your handset 2 Insert the data plug into the data port of
-
7/30/2019 Nntn7348a En
29/112
23essentials
using your handsetas a modemYou can use your handset as a modem with alaptop, handheld device, or desktopcomputer. In order to use your handset as amodem, you must create a connection
between your handset and the other device.connect with a USB cable
Use a USB cable to connect yourhandset to a laptop, handheld device, or
desktop computer.1 Pull out the connector cover, and insert
the charger into mini USB connector onyour phone as shown.
2 Insert the data plug into the data port ofthe other device.
When used as a modem, your handset isenabled for Packet Data transfer mode, which isused for small file transfers such as email.
Note: To use these services, you must installthe iDEN Wireless Data Services software
(available separately). For more information onsetting up your computer and your handsetfor packet and circuit data calls, contact yourservice provider.
ain attractions
-
7/30/2019 Nntn7348a En
30/112
24 main attractions
main attractions
PTV featuresWith Push To Viewfeatures, your
phone can send and receive thefollowing items through Private calls withother phones that have this capability:
Short text messages1
Pictures1
Datebook events
My Info
Contact information
You can choose to send My Info and contactinformation to any Private ID.
You can choose to send pictures, messages,events to the Private ID you are engaged in aa Private call with, Private IDs on the Recent Calls
list, and Private IDs stored in Contacts.When you make or receive a Private call, yourphone automatically determines whether thephone you are engaged in a Private call with isable to receive each of these items. Yourphone saves this information for as long asthe Private ID is on your Recent Calls list or issaved in your Contacts. Your phone updates thesaved information each time you make or
receive a call to or from that Private ID.You can turn your phones ability to send andreceive messages, pictures, events on andoff.
1. Additional charges may apply.
Note: You cannot send PTT feature items begin a message from the Contact or
-
7/30/2019 Nntn7348a En
31/112
25main attractions
Note: You cannot send PTT feature itemsduring Talkgroup calls or SDG calls.
send messagesThe Push to Send Messages featurelets you send short text messagesthrough Private calls.
When you send a message, it appears on thedisplay of the phone you are engaged in thePrivate call with. The message wont bestored in the recent calls list.
begin a message and choose arecipient
You can begin a message during a Private call,
from the Contacts list, the Recent Calls list, or fromthe PT Manager.
begin a message during a Private call:
While in a Private call, pressM > Use PTT
Feature > Send Message.
begin a message from the Contact orthe Recent Calls list
1 From the Contacts or the Recent Calls list,
select the entry containing the Private IDyou want to send the message to.
2 PressM > Use PTT Feature > Send Message.
begin a message from the PT Manager
The PT Manager lets you select the Private IDyou want to send the message to from Contactsor the Recent Calls list.
Find it:M > PT Manager > Send Message.Then select A Contactor A Recent Call to see a listof entries from the Contacts or the Recent Calls listthat can receive messages.
create messages
After you have begun a message and chosena recipient, a screen appears that lets youcreate the text of the message you want to
send Your message may be up to 400 reply to a message
-
7/30/2019 Nntn7348a En
32/112
26 main attractions
send. Your message may be up to 400characters long.
You can choose from a list of ready-madewords or short phrases called Quick Notes.You can use a Quick Note as it is or edit itbefore you send it. Editing a Quick Notechanges the Quick Note for this message onlyand will not change the Quick Note on the list.
send a completed message
After you have completed your message,
press the PTT button to send it.
receive messages
When you receive a message, a message
notification appears on the display. To viewthe message pressO.
To dismiss the message pressa underDismiss.
reply to a message
1 View the message.
2 Pressa under Reply.3 Create the message and press the PTT
button to send it.
send picturesYou can send pictures stored in MyPictures through Private calls. The picture yousend appears on the Private call recipients
display.If the recipient accepts the picture, theirphone saves the picture.
The first time you send a stored picture after
turning the phone on, Picture Fees May Apply.Continue? appears and you are prompted torespond.
Note: You cannot make or receive Private
calls while transmitting or receiving a picture.
send a picture during a call 2 PressM > Use PTT Feature > Send Picture
-
7/30/2019 Nntn7348a En
33/112
27main attractions
send a picture during a call
1 While in a Private call, pressa under
Picture or pressM
> Use PTT Feature > SendPicture.
A list of pictures that can be included in aPrivate call appears.
2 Select the picture you want to send.3 Press the PTT button to send the picture.
4 Wait while the picture is transmitted. ThePrivate call is temporarily interrupted
while a picture is transmitted.5 When prompted, press the PTT button to
resume the Private call.
start a call by sending a picturefrom My Pictures
Find it:M > My Pictures
1 Select the picture you want to send.
2 PressM > Use PTT Feature > Send Picture.
A list of contacts that have Private IDs andare able to receive pictures appears.
3 Select the name of the person you wantto send the picture to.
4 Press the PTT button to send the picture.
5 When prompted, press the PTT button toresume the Private call.
from the PT Manager:
Find it:M > PT Manager > Send Picture.
1 Select A Contact, or A Recent Call to see a list ofentries that can receive pictures.
2 Select the entry containing the Private IDyou want to send the message to.
3 Select the picture you want to send.
4 Press the PTT button to send the picture.
5 Once picture has been sent when prompted to respond Pressa under Yes to
-
7/30/2019 Nntn7348a En
34/112
28 main attractions
5 Once picture has been sent, whenprompted press the PTT button to resumethe call.
receive a picture
When someone sends you a picture, yourphone emits a tone or vibrates and a message
appears asking if you want to accept thepicture.
Pictures you receive are saved to yourphones memory. They are accessible
through My Pictures.When you see a message asking if you wantto accept the picture, press Yes to accept or Noto decline.
Tip: If you want to stop the transmissionbefore it is finished, pressE.
Note: The first time you accept a storedpicture after turning the phone on, Picture Fees
May Apply. Continue? appears and you are
prompted to respond. Pressa under Yestoaccept the picture.
clear a picture from the displayIf you want to clear a picture from yourphones display while still on a call, pressM> Clear Screen.
The picture will not appear on the displayagain the next time you receive a call fromperson who sent it. This does not delete thepicture from My Pictures.
send My Info
1 While in a Private Call pressM > Send viaPTT, and push the PTT button to send.
or2 From the home screen pressM > My Info
>M > Send via PTT andpush the PTTbutton to send.
set my info sending option 1 Select On or Off
-
7/30/2019 Nntn7348a En
35/112
29main attractions
set my info sending option
You can control what portion of theinformation in My Info is sent andwhether it is sent automatically in every call oronly when you choose to send it.
Find it:M > PT Manager > Configure > PTT My Info >Info to Send
1 Select or remove the fields you want tosend.
2 Pressa under Done.
The information your phone sends alwaysincludes My Name and Private. You may also sendLine 1,Line 2, and Carrier IP, depending on yoursending options.
automatic sendingTo control whether you send your informationautomatically:
Find it:M > PT Manager > Configure > PTT My Info >
Auto Send
1 Select On or Off
When you make a call in which yourinformation is sent automatically, the nameyou entered in the My Name field of My Infoappears on the display of the recipientsphone, even if your name and Private ID arenot stored in the recipients Contacts.
send contact information
1 While in a Private Call pressM > Use PTTFeature.
2 Select Send Contactand select the contactinformation you want to send.
3 Push the PTT button to send.
or
1 From the home screen pressM > PTManager > Send Contact.
2 Enter the Private ID number of the person one touch PTT
-
7/30/2019 Nntn7348a En
36/112
30 main attractions
pyou want to send the Contact informationto or pressa under Browse.
3 Select from Recent Calls, Contacts, or Memo.
4 Select the contact information you wantto send and push the PTT button.
turn PTT features on and offYou can turn your phones ability to send andreceive messages, pictures, and Datebookevents on and off.
You cannot turn your phones ability to sendand receive My Info and contact informationon and off.
Find it:M > PT Manager > Configure
1 Select On/Off PTT.
2 Check or uncheck Messages, Pictures and/orEvents.
one touch PTT
Find it:M > PT Manager> Configure > One Touch
PTT.One Touch PTT sets your phone to do any of thefollowing each time you press the PTT buttonfrom the home screen:
option
Off: Nothing happens when you press thePTT button from the home screen.
Quick PTT: Go to Quick PTT. See quick PTT
on page 31.Last Call : Call the most recent Private ID orGroup on the recent calls list.
Assigned No.: Call a Private ID you assign.
Enter the number using your keypad, orpressa under Search. Select Contacts, RecentCalls, or Memo.
Note: If you are entering a Talkgroup
number, enter# before the number.
To view a list of Contacts and SDG lists withoption
-
7/30/2019 Nntn7348a En
37/112
31main attractions
quick PTTQuick PTT lets you quickly make a call,create an SDG list or make a SDG call whenaccess any Private IDs on your phone.
Private IDs in Contacts:
Find it:M > PT Manager > Quick PTT
or
Find it:M > Quick PTT
To move between Contacts, Recent Calls, or Memo,
use the left or right, or press* or#.To make a Private call or SDG call:
1 Select the entries you want.
2 Press Done.3 Push the PTT button.
PT managerThe PT Manager lets you quickly access PTTfeatures, and other Private call features, fromthe main menu.
PT Manager: Go to PT Manager. See PTmanager on page 31.
Send Message: Go to the first screen to send amessage.
Send Picture: Go to the first screen to sendpictures. See send pictures on page 26.
Send Event: Go the the first screen to send aDatebook event.
Send My Info: Go to the first screen to send MyInfo. See send My Info on page 28.
Send Contact: Go to the first screen to send acontact. See send contact information onpage 29.
option
You can also access the Quick PTT feature create a message
-
7/30/2019 Nntn7348a En
38/112
32 main attractions
and set the One Touch PTT feature.
Find it:M > PT Manager
1 Select Quick PTT to quickly find a contactthat has a Private ID.
or
2 Select Send Message, Send Picture, Send Event, SendMy Info, or Send Contact. After choosing whatPTT item you are sending, select acontact and press the PTT button to send.
or3 Select Configure to configure your PTT Quick
Notes, PTT My Info, One Touch PTT, or On/Off PTT.
MMSMulti-Media Messaging Service (MMS) letsyou send and receive messages that mayinclude text, pictures and audio recordings.
g
Shortcut: From the home screen pressaunder Msgs > [Create Message] > [Create MMS Msg].
or
Find it:M > Messages > [Create Message] > [CreateMMS Msg].
1 Select To and add the phone number oremail address or select from Contacts orRecent Calls and pressa under Back.
Tip: To remove a phone number or email
address from the list of message recipients,scroll to the phone number or email addressand pressa under Remove.
When you are finished addressing the
message, pressa under Back.To enter or edit the body of the message:
2 Select Mesg and enter text or pressaunder QNotes to select a pre-written quick
note.
3 Pressa under Back anda under Send. option
-
7/30/2019 Nntn7348a En
39/112
33main attractions
more message options
To view more message fields in a messageyou are creating, select .....MORE..... or pressaunder More. reply to a message
You can reply to a message while you areviewing it, or while a previously viewedmessage is highlighted in the messagecenter. You cannot reply to unread messages.
To reply to a message:
1 View the message you want to reply to.
2 To reply to the sender only, pressaunder Reply or if you wish to include all the
people copied in the message, pressa
under Reply All.
A list of short phrases appears. Select anyof these phrases to add it to yourmessages or select [Create Reply].
option
Subject: Create or edit the subject line.
Attach: Attach a picture, audio file, video orvoice record.
Cc: Send a copy of this message tosomeone else.
Auto Replies: Allows you to create a list ofpossible short answers for the recipient tochoose when replying to your message.
Priority: Set priority Normal or High.
Report: Set receipt confirmation On Delivery.
Valid Until: Set a date after which attempts todeliver the message end, or press- underNo Date.
option
3 Edit any message fields you want to attach a picture and audio
-
7/30/2019 Nntn7348a En
40/112
34 main attractions
change.
4 Pressa under Send.
quick notes
When you are filling in the Message and Subjectmessage fields, you can add ready-made
words or short phrases called Quick Notes.After you add these words or phrases, youcan edit them as you would any other text.
1 While you are creating a message, scroll
to or select Message or Subject.2 Pressa under QNotes.
Select the Quick Note you want to insertinto the message.
3 Pressa under Send.
precording or a ring tone
You can attach one or more pictures audiorecordings or ring tones from your phone intothe body of the message. You can includetext in the body of your message in additionto these items.
While you are filling in the Attach field, press[New] > My Pictures, VoiceRecord or Ring Tones.
A list of available pictures, audio recordingsand ring tones appears.
Select the picture, voice record or ring toneyou want to attach.
Tip: To view or listen to the item before
attaching it, highlight it and press View or Play.Note: You can only attach audio files andpictures if they are not forward locked and iftheir DRM settings do not prevent you fromsending.
Forward locked items are usually copyright remove an attachment
-
7/30/2019 Nntn7348a En
41/112
35main attractions
protected, and you cannot share them withanyone, such as in Private calls or by
uploading them from your phone.
create a new voice record
You can create a new voice record to send
with a message:1 PressM or pressa under Attach > [New].
2 Select VoiceRecord > [New VoiceRec].
3 Say the message you want to record intothe microphone.
4 When you are finished recording,pressO.
5 When you are finished, pressa
underBack anda under Done.
The voice record is attached to the messageand saved to the list of voice records.
To remove an attachment in a message youare creating:
1 Select Attach.
2 Scroll to the attachment you want toremove.
3 PressM > Unattach.
drafts
While you are creating a message, you can
save it in the MMS drafts folder before yousend it.
You can view, edit, send, or delete saveddrafts.
save a message in the MMSdrafts folder
From the Message center pressM > Save.
You can continue to create the message. Thei d i h MMS d f f ld
To delete a message in the MMS drafts folderi h di i ll h
-
7/30/2019 Nntn7348a En
42/112
36 main attractions
version you saved in the MMS drafts folderwill not change.
send a draft
Shortcut: From the home screen pressaunder Msgs > Drafts > MMS Drafts.
1 Select the draft you want to send.2 Pressa under Send.
edit a draft
Shortcut: From the home screen pressaunder Msgs > Drafts > MMS Drafts.
Select the draft you want to edit and pressO.
delete a draftWhen you send a draft, it is removed from theMMS drafts folder.
without sending it, scroll to the message youwant to delete and pressa under Delete and
a under Yes.
MMS outbox
MMS messages you have sent or tried to
send are stored in the MMS Outbox.
forward items from the outbox
Shortcut: From the home screen pressa
under Msgs > Outbox > MMS Outbox.1 Scroll to the message you want to
forward.
2 PressM > Forward.
3 Edit and send your message.
resend 3 Select Delivery Status.
-
7/30/2019 Nntn7348a En
43/112
37main attractions
If a message was not sent from your handset,you can resend it.
Shortcut: From the home screen pressaunder Msgs > Outbox > MMS Outbox.
1 Scroll to the message you want to resend.
2 Press Resend.Note: If your message was sent successfully,Resend will not appear as an option.
check delivery statusIf a message was successfully sent and youset the message to give a report confirmingdelivery, you can check the delivery status:
Shortcut: From the home screen pressaunder Msgs > Outbox > MMS Outbox.
1 Scroll to the message you want to view.
2 PressM.
delete a message
1 Scroll to the message you want to delete.2 Pressa under Delete or
3 PressM > Delete Multiple.
4 Select the message or messages youwant to delete
5 Pressa under Delete to confirm.
receive a messageWhen you receive an MMS message, amessage notification appears on the display.
1 To view the message pressO.
2 If the message fills more than one screen,use the navigation key to scroll downand read the remaining text.
message notifications set notification options
-
7/30/2019 Nntn7348a En
44/112
38 main attractions
When you receive a message, your phonenotifies you with text on the display, anotification tone or vibration.
You can access the message or dismiss thenotification.
If you dismiss the notification, the message isnot deleted. It can be accessed through themessage center.
If you are not on a phone call when youreceive a message, your phone sounds anotification tone every 30 seconds until youaccess the message or dismiss the alert.
If you are on a call when you receive amessage, your phone may sound anotification tone during the call or after youend the call, depending on how you set yournotification options.
To control whether your phone soundsmessage notification tones while you are on aphone call:
Find it:M > Settings > Phone Calls> Notifications.
Select from the following options:
Tip: To set notification options during a callpressM> In Call Setup > Notifications.
option
Receive All: Tones sound during calls for alltypes of messages.
Msg Mail Only: Tones sound during calls for
mail messages; tones for all other types ofmessages are held until you end calls.
Delay All: Tones for all types of messages areheld until you end calls.
Note: Delay All is the default setting.
embedded objects andh
Note: Attachments that are of an unknowntype cannot be opened but they can be
-
7/30/2019 Nntn7348a En
45/112
39main attractions
attachments
Messages may contain pictures or audiorecordings as part of the body of the messageor as attachments.
If a message contains pictures or audiorecordings in the body of the message,highlight each picture or audio recording toview or play it.
If a message contains a picture or audiorecording as an attachment, open theattachment to view the picture or play theaudio recording.
open attachments
1 View the message.2 Highlight the attachment you want to
open and pressO. Attachments appearat the end of a message.
type cannot be opened, but they can bedeleted.
view received messages fromthe message center
Shortcut: From the home screen pressa
under Msgs > Inbox > MMS Inbox.use auto replies
If the message you are replying to was sentwith auto replies, it contains a numbered list
of possible replies for you to send. Press thenumber of the reply you want to send. Thereply is sent immediately without furtheraction.
delete unread messages
1 Scroll to the message you want to delete.
2 Pressa under Delete.
3 Pressa under Yes to confirm. the From field, the To field, the Cc field, thesubject line or the body of the message you
-
7/30/2019 Nntn7348a En
46/112
40 main attractions
forward a message
1 PressM > Forward.2 Create and send your message.
Embedded objects and attachments areincluded when you forward a message.
lock and unlock messages
Locked messages cannot be deleted until youunlock them.
1 View the message you want to lock orunlock.
2 PressM > Lock Message orM > UnlockMessage.
call a number in a message
If a message you receive contains a phonenumber, Private number, or Talkgroup ID in
subject line, or the body of the message, youcan call or send a call alert to that number.
send a call alert
1 View the message.
2 Highlight the Private number or Talkgroup
ID you want to alert.3 PressM > Alert.
4 Push the PTT button.
make a group call1 View the message.
2 PressM.
3 Highlight the Talkgroup ID you want tocall.
4 Select Talkgroup.
5 Push the PTT button.
store message information tocontacts
type you want to assign the number oremail address
-
7/30/2019 Nntn7348a En
47/112
41main attractions
contacts
If a message you receive contains a phonenumber, Private number, Talkgroup ID, or anemail address in the From field, the To field,the Cc field, the subject line, or the body ofthe message, you can store this information
to Contacts.1 View the message.
2 Highlight the number or email addressyou want to save.
3 PressM > Save Number orM > Save Email.
4 To store the number or email address as anew entry, select [New Contact].
To store the number or email address toan existing entry, select the entry.
5 With the Contacts type field highlighted,scroll left or right to display the Contacts
email address.
6 Press Save.
go to a website
If a message contains one or more websiteURLs, you can go to that website.
1 View the message.
2 Highlight the website URL you want to goto.
3 PressM > Go To Website.Note: The entire URL must appear in themessage to allow you to open the website.
save an embedded picture oraudio recording
To save a picture or audio recording that ispart of the body of a message you receive:
1 View the message.
2 Hi hli h h i di di
save attachments
-
7/30/2019 Nntn7348a En
48/112
42 main attractions
2 Highlight the picture or audio recordingyou want to save.
3 PressM > Save Picture orM > Save Audio.
The item will save in the default storagelocation.
Note: Some types of pictures and audiorecordings can be viewed or played, but notsaved.
delete an embedded picture oraudio recording
To delete a picture or audio recording that ispart of the body of a message you receive:
1 View the message.2 Highlight the picture or audio recording
you want to delete.
3 PressM > Delete Picture orM > Delete
Audio.
1 View the message.
2 Highlight the attachment you want tosave.
3 PressM > Save Attachment.
Selected items save to the default storage
location.Note: Some types of pictures and audiorecordings can be viewed or played, but notsaved. You may save pictures and audio
recordings from slide shows individually asyou view or listen to them.
save a picture
1 View the slide show.2 When the picture you want to save
appears, pressM.
3 Select Save Picture.
save audio The MMS Setup menu lets you customizeMMS for your handset with the following
-
7/30/2019 Nntn7348a En
49/112
43main attractions
1 View the slide show.
2 PressM > Save Audio.3 If the slide show contains more than one
audio recording, a list of the audiorecordings appears. Select the audio
recording you want to save.message transmission
After you start to send a message you havecreated or start to download a message youhave been sent, you can still stop themessage transmission from being completedby pressingu.
customize MMSFind it:M > Messages >M > MMS Setup
This option is available from many context-sensitive menus when you are using MMS.
MMS for your handset with the followingoptions:
option
Friendly Name: Enter text here to create afriendly name. Your friendly name is thename displayed in the From: field on other
iDEN handsets when they receivemessages from you.
Signature: Enter text here to create asignature. Your signature is text that is
automatically inserted at the end of allmessages you create. You can edit the textbefore sending the message.
Quick Notes: Lets you create new Quick Notesand edit or delete Quick Notes you havecreated.
Replies: Lets you create new reply phrasesand edit or delete reply phrases you havecreated.
new quick notes and replyphrasesCl C l h l i
option
-
7/30/2019 Nntn7348a En
50/112
44 main attractions
phrases
create quick notes1 From the MMS Setup menu, select Quick
Notes or Replies.
2 Select [New Quicknote] or [New Reply].
3 Enter text from the keypad.
edit quick notes
You can edit only Quick Notes and reply
phrases you have created.1 From the MMS Setup menu, select Quick
Notes or Replies.
2 Select the Quick Note or reply phrase you
want to edit.3 Edit the text.
Cleanup: Controls how long messages remainin the Inbox and Outbox before they aredeleted.Downloads: Controls whether your phoneautomatically downloads new messageswhen they arrive, or only after you respond
to a prompt or read the message from theInbox. Set this option to Automatic if you wantyour phone to download new messagesautomatically; set the option to Manual if youwant your phone to prompt you beforedownloading new messages.
Memory Size: Shows the total amount of Used,Free:, and total Capacity of the phonesmemory.
delete only Quick Notes and replyphrases you have created
1 Select Inbox or Sent Items.
2 Choose a cleanup option from the
-
7/30/2019 Nntn7348a En
51/112
45main attractions
phrases you have created
1 From the MMS Setup menu, select Quick
Notes or Replies.2 Scroll to the Quick Note or reply phrase
you want to delete.
3 Pressa under Delete.
4 Pressa under Yes to confirm.
cleanup
The Cleanup option controls how longmessages remain in the MMS Inbox and MMSOutbox before they are deleted. You set thecleanup option for the Inbox and Outboxseparately.
The cleanup option deletes only read,unlocked messages.
Find it:M > Messages >M > MMS Setup >Cleanup.
2 Choose a cleanup option from thefollowing list:
option
Off: Messages are never automaticallydeleted.
5 Messages: If you have more than 5messages, messages are deleted in theorder they were received, starting with theoldest, until 5 are left.
10 Messages: If you have more than 10messages, messages are deleted in theorder they were received, starting with theoldest, until 10 are left.
With these options, messages are deleted
in the order they were received, startingwith the oldest, until the selected numberare left.
Find it:M > Messages
1 Select Inbox Drafts or Outbox1 D Messages are deleted if they are older
option
-
7/30/2019 Nntn7348a En
52/112
46 main attractions
3 Pressa under Yes to automaticallydelete messages now or pressa underNo to delete messages later.
delete multiple or all messagesTo delete multiple or all read, unlockedmessages from the MMS Inbox, all messagesin the MMS Drafts folder, or all successfullysent messages in the MMS Outbox:
1 Select Inbox, Drafts, or Outbox.
1 PressM
> MMS Drafts >M
> Delete Multiple,and check the messages you want todelete.
or
2 Select Delete All and pressa under Yes toconfirm.
bluetooth
Your phone supports the use of wirelessBluetooth headsets.
Find it:M > Bluetooth.
The Bluetooth connection menu contains anoption to search for audio devices.
1 Day: Messages are deleted if they are olderthan 1 day.
3 Days: Messages are deleted if they areolder than 3 days.
With these options, messages are deletedwhen you exit the message center aftersetting the option.Custom: Lets you create a clean-up option ofup to 99 messages or 99 days.
turn BluetoothOn or Off
You can turn your phones Bluetooth feature
1 Follow the instructions on your Bluetoothheadset to set it up to be found.
-
7/30/2019 Nntn7348a En
53/112
47main attractions
You can turn your phone s Bluetooth featureon or off. While Bluetooth power is on, yourphone can communicate with other devices.Find it:M > Bluetooth > Setup > Power > On.
1 Select Name if you wish to assign a name
to your handset.2 Select Find Me Time to determine the
amount of time in which your handset canbe found by other Bluetooth devices.
Tip: You can turn off Bluetooth if you want toprolong battery life or if you enter an areawhere Bluetooth is prohibited.
make a Bluetooth connection
connect your phone with a Bluetoothheadset
Find it:M > Bluetooth > Hands Free > [Find Devices].
p
2 Once your Bluetooth headset is set to be
found pressO on your handset. Yourphone will scan the Bluetooth headsetuntil it finds it. PressOwhen you see thename of the Bluetooth headset on your
screen.3 Your phone requires that you create a
bond in order to connect with a Bluetoothheadset. Press- under Yes when youare prompted to bond with the headset.
4 Enter the Bluetooth pass key.
Some Bluetooth devices ship withBluetooth PINs. Please refer to your
Bluetooth devices user guide to locatethis information.
If a device ships without a Bluetooth PIN,then refer to its user guide to set the PINon that device. To establish a connection
to that device, enter the same PIN forboth your phone and the device. For
Tip: If you have previously connected to adevice, the device will be stored on your
-
7/30/2019 Nntn7348a En
54/112
48 main attractions
example, if you enter 1234 as the devices
PIN, then enter 1234 as your phones PIN.5 Press- under Ok.
Note: This handset offers a bluetooth autopair feature with auto pair compatible
Motorola devices. When bonded viabluetooth with a certain device, the pin willnot be required.
connect your phone with another
deviceFind it:M > Bluetooth > Link To Devices.
1 Select the device you want from the list offound devices on your screen.
2 Create a bond if you are prompted to doso.
phone so you can connect with it easily.
use Bluetooth during a call
You can connect with available Bluetoothdevices during a call.
Note: If the Handsfree Devices list contains onlyone device, then your phone willautomatically try to connect to that device.
1 While in a call, pressM > Use Bluetooth.
2 Press- under Yes to power OnBluetooth.
3 Select the audio device you want toconnect to from the list of Handsfree Devices.
send information via Bluetooth
You can use your phone to send Contacts
4 Select the device you want to transfer thecontact information to.
-
7/30/2019 Nntn7348a En
55/112
49main attractions
You can use your phone to send Contactsentries, Datebook events, or pictures toanother Bluetooth device.The receiving device must be within 32 feet(10 meters) of your phone in order to connectwith yours.
Note: Files sent or received may be upto 200 kb, depending on your serviceprovider.
send ContactsShortcut: From the home screen press-under Contcs.
1 Select the contact you want to send.
2 PressM > Send Via... > Bluetooth.3 Press- under Yes to power On
Bluetooth.
or
Search for the device by selecting [FindDevices].
5 If prompted, bond with the device.
Your phone connects with the device andtransfers the contact.
send a Datebook event
Find it:M > Datebook
1 Select the datebook event you want tosend.
2 PressM > Send Via... > Bluetooth.
If the event you select repeats, then youwill be prompted to choose whether tosend the selected instance of the event orall instances of the event.
To send only the selected instance of theevent, select This Event Only.
and if their DRM settings do not prevent youfrom sending.
-
7/30/2019 Nntn7348a En
56/112
50 main attractions
or
To send all instances of the event, selectRepeat Events.
3 Press- under Yes to power OnBluetooth.
4 Select the device you want to transfer thecontact information to.
or
Search for the device by selecting [FindDevices].
5 If prompted, bond with the device.
Your phone connects with the device and
sends the datebook event.
send pictures via Bluetooth
Note: Note: You can only send audio files,and pictures if they are not forward locked
Find it:M > My Pictures.
1 Select the picture you want to send.
2 PressM > Send Via... > Bluetooth.
3 Select the device you want to transfer the
contact information to.or
Search for the device by selecting [FindDevices].
4 If prompted, bond with the device.
Your phone connects with the device andsends the datebook event.
basics
-
7/30/2019 Nntn7348a En
57/112
51basics
See page 1 for a basic phone diagram.
display
The home screenshows when you turn onthe phone. To dial a number from the homescreen, press number keys andS.
Note: Your home screen may look different.
Soft key labelsshow the current soft keyfunctions. For soft keya locations, seepage 1.
status indicatorsStatus indicators are shown at the top of thehome screen:
1 Signal Strength Indicator: Vertical bars showthe strength of the network connection. You
1. 2. 3. 4. 5. 6. 7.
cant make or receive calls when1or0shows.
Your phone provides convenient ways toenter words, letters, punctuation, and
b h t d t
-
7/30/2019 Nntn7348a En
58/112
52 basics
2 Active Phone Line: 1 indicates phone line 1 is
ready to make calls.3 Speaker Off: Sounds associated with Private
calls and group calls are set to come throughthe earpiece rather than through the speaker.
4 Ringer Off: Your phone is set to not ring.
5 Message Indicator: Shows when youreceive a text message.
6 Packet Data: Your handset is ready to transferpacket data or is transferring packet data.
7 Battery Charge Indicator: A fuller batteryindicates a greater charge. Recharge thebattery when your phone shows Low Battery.
text entrySome features let you enter text.
numbers whenever you are prompted to
enter text (for example, when adding aContacts entry or when text messaging).
change the character input mode:
1 When you see a screen where you can
enter text, pressM to change thecharacter input mode.
2 Select one of the following options:
entry modes
Alpha Press a key several times foreach character.
Word Enter words using a predictivetext entering system that letsyou enter a word with fewerkeypresses.
2 Press the corresponding keys once perletter to enter a word (for example, toenter the ord J ff ress5333)Symbols Enter symbols.
entry modes
-
7/30/2019 Nntn7348a En
59/112
53basics
Tip: When entering text, press and hold# tochange letter capitalization (Abc > ABC > abc).
word mode
Word English Text Input lets you enter textinto your phone by pressing keys just once
per letter.Word English Text Input analyzes the lettersyou enter using an intuitive word databaseand creates a suitable word. (The word may
change as you type.)enter a word using Word CharacterInput:
1 Select the Word character input mode.
enter the word Jeff, press5333).
(If you make a mistake, pressa underDelete or* to erase a single character.Press and holda under Delete or* todelete an entire entry.)
3 To accept a word and insert a space,press#.
alpha mode
enter characters by tapping the keypad:1 Select the Alpha mode.
2 Press the corresponding keys repeatedlyuntil the desired letter appears. (For
example, to enter the word Jeff, press5once,3 two times,3 three times, and3 three times again. If you make amistake, pressa under Delete to erase a
Symbols Enter symbols.
Numeric Enter numbers by pressing thenumbers on the keypad.
single character. Press and holda underDelete to erase an entire entry.)
9 W X Y Z 9
characters
-
7/30/2019 Nntn7348a En
60/112
54 basics
By default, the first letter of an entry is
capitalized and the following letters arelowercased. After a character is entered, thecursor automatically advances to the nextspace after two seconds or when you enter acharacter on a different key.
Characters scroll in the following order: volumePress the volume keys upor down to:
turn off an incomingcall alert
change the earpiecevolume during calls
change the ringervolume from thehome screen
Tip: Sometimes silence really isgolden. Thats why you can quickly set
characters
1 . ? ! , @ & : ; - ( ) % 2 A B C 2 3 D E F 3
4 G H I 4
5 J K L 56 M N O 6
7 P Q R S 7
8 T U V 8
9
0 + - 0 * / \ [ ] = > < #
# Space
* Back
your ringer to Vibrate All by holding thedown volume key in the home screen.
The hands-free speaker stays on until youpress the speaker key or end the call. Thenext phone call will redirect the audio back to
-
7/30/2019 Nntn7348a En
61/112
55basics
navigation keyPress the navigation key
up, down, left, or rightto scroll to items in the
display. When you scrollto something, pressO.
handsfree speaker
You can use your phones hands-free speakerto make calls without holding the phone toyour ear.
During a call press thespeaker keystoturn the hands-freespeaker on.
next phone call will redirect the audio back to
the earpiece.
transmitters
Note: Consult airline staff about the use of
the Transmittersfeatureduring flight. Turn offyour phone whenever instructed to do so byairline staff.
Transmittersturns off your phones calling
features in situations where wireless phoneuse is prohibited, but you can use the phonesother non-calling features when Transmittersturned Off.
Find it:M >u > Advanced > Transmitters > Off.
use GPS with mapsoftware
NMEA-0183 standard. Consequently it'sunsuitable for conventional marine NMEA-0183 equipment use Its intended use is for
-
7/30/2019 Nntn7348a En
62/112
56 basics
software
Your phone is enabled with a highly-capableGPS receiver that sends location informationto a USB port on a PC, laptop, or PDA.
Note: No serial port connectivity is provided
by your phone. Applications on the hostdevice which are expecting to receive theGPS location information via a serial port mustinstead use a Virtual Serial Comm Port.
The data sent to the host device is formattedas prescribed in the National MarineElectronics Association 0183 V3.0 (NMEA-0183) standard. As such it supports thefollowing sentences: GGA, GLL, GSA, GSV,
RMC, and VTG.This handset is not a full NMEA-0183compliant device supporting electrical RS-422/RS-232 connectivity as dictated by the
0183 equipment use. Its intended use is for
normal "terrestrial" mobile users who want toenable their USB hosting computing devicessuch as a PC, laptop or PDA with the phone'shighly-capable GPS functionality.
get connected1 Slide open the
phone's bottomconnector and
insert a mini-USB cable intothe phone's bottom connector.
2 Insert the other end of the mini-USB cable
into a vacant USB receptacle of your hostdevice. A virtual USB Comm Port will becreated on your host device uponsuccessful enumeration of the phone as a
USB Communications Device Classdevice.
3 E li i i h d i
Find it:M > GPS > Interface > NMEA OUT > USB.
Your phone is now actively sending locationNMEA 0183 f d GPS d USB
-
7/30/2019 Nntn7348a En
63/112
57basics
3 Ensure no application in your host device
is using the created COMM port. Youmay need to ensure that the createdvirtual COMM port settings are set asfollows:
Bits per second: 4800 Data bits: 8
Parity: None
Stop bits: 1
Flow control: None.
4 Start the GPS application on your hostdevice. Set the GPS application to start
accepting NMEA-0183 formatted datafrom the created Virtual COMM port.
5 Set your phone to start sending NMEA-0183 formatted location information.
NMEA-0183 formatted GPS data to your USB
host device.To stop your phone from sending locationdata:
Find it:M > GPS > Interface > NMEA OUT > Off.
Note: Each time you power your phone Off,NMEA OUT is automatically set to Off andyou need to manually restart it using themenu selections above.
Your USB host device will generally providecharging power (5V, up to 500mA) to yourphone via the mini-USB cable therefore noother charging power to it will normally be
required. However some laptops may requirethat you provide external AC/DC power to thelaptop in order for it to provide full 500mAcharging current capability to the phone.
calls
-
7/30/2019 Nntn7348a En
64/112
58 calls
To make and answer calls, see page 15.
recent calls
The Recent Calls list contains informationassociated with calls you have made andreceived and call alerts you have received.
When you send or receive Private calls, the
Recent Call list contains the following PTT itemswith those calls:
Messages
Pictures
Events
My Info
Contacts
The recent calls list displays up to 20 of themost recent calls and call alerts.
Find it:M > Recent Calls.Tip: You can also access the Recent Calls listby pressing the navigation key down.
1 Scroll through the list.
2 Highlight the item you want to view or
perform some action on.3 To view more details of the item pressO.
store an item to contacts from
recent callsPhone calls, Private calls, My Info receivedfrom other phones, or Contacts entriesreceived from other phones can be stored to
the Contacts list from the Recent Calls list.
Find it:M > Recent Calls.
1 Scroll to or select the item you want tostore
voice names
You can place calls by speaking comands to
-
7/30/2019 Nntn7348a En
65/112
59calls
store.
2 Pressa under Save to store theinformation as a new entry in theContacts list.
or
3 If Save is not one or you options, pressM> Update Contacts. And select the contact youwant to update.
4 Pressa under Done to save your changes.
redialTo redial your last outgoing phone call, press
and holdN or push the PTT button if it was aprivate call.
p y p gyour phone if you have previously assigned avoice name to your contacts.
assign voice names to contacs:
1 Pressa under Contcs and select [New
Contact].2 Assing a name, phone number and select
[Options].
3 Select Voice Name and follow the propmt to
record the voice name.4 Pressa under Back anda under Done to
save the entry.
place a call using voice command:
1 From the home screen press and hold thespeaker keys until you are prompted tosay the voice name.
The handset will automatically place the call.
caller ID
Caller ID allows people to identify a
different numbers depending on the reasonyou missed the call. You can forward phonelines 1 and 2 independently.
-
7/30/2019 Nntn7348a En
66/112
60 calls
p p ycaller before answering the phone bydisplaying the number of the incoming call. Ifyou do not want your number displayed whenyou make a call, just follow these easy steps.
To block your phone number from beingdisplayed for a specific outgoing call:
1 Press*67.
2 Enter the number you want to call.
3 PressS.To permanently block your number, call yourservice providers Customer Care.
call forwardCall forwarding sends calls to the phonenumbers you specify. You can forward all callsto one number or forward missed calls to
es a d depe de t y
Find it:M > Call Forward.1 To forward all calls select All Calls and
select To to enter the phone number youwant all your calls forwarded to.
or2 You can specify a forwarding number for
each type of missed call by selectingDetailed and chosing the following options:
If Busy: When your handset is on a call ortransferring data.
If No Answer: When you do not answer onthe first 4 rings.
If Unreachable: When your handset is out ofcoverage or powered off.
emergency calls
Your service provider programs one or more
When you make an emergency call, yourphones GPS Enabled feature can helpemergency service personnel find you, if you
-
7/30/2019 Nntn7348a En
67/112
61calls
p p gemergency phone numbers that you can callunder any circumstances, even when yourphone is locked or the SIM card is notinserted.
Note: Emergency numbers vary by country.Your phones preprogrammed emergencynumber(s) may not work in all locations, andsometimes an emergency call cannot beplaced due to network, environmental, or
interference issues.Your phone supports emergency calling.Emergency phone calls can be made evenwhen your SIM card is blocked or not in your
phone.Dial 911 or your local emergency number tobe connected to an emergency responsecenter. If you are on an active call, you mustend it before making an emergency call.
g y p y , y
are in a location where your phone's GPSantenna has established a clear view of theopen sky and your local emergency responsecenter has the equipment to process locationinformation. Because of the limitations of this
feature, always provide your best knowledgeof your location to the emergency responsecenter when you make an emergency call.
Note: Emergency calls cannot be placed
while the keypad is locked.Note: If you have not registered on thenetwork, emergency calls cannot be placedwhile your SIM card is in your phone.
international callsIf your phone service includes internationaldialing, press and hold 0 to insert your local
international access code (indicated by +).Then, press the keypad keys to dial thecountry code and phone number.
temporary prepend will be inserted to thenumber you are dialing.
-
7/30/2019 Nntn7348a En
68/112
62 calls
y p
You can aditionally enable a predefined prefixto the dialing number by using Prepend dialing.
Find it:M > Settings > Phone Calls > Prepend.
1 Select Prepend and set it to On.
2 Select Number and add the prefix number ofyour choice.
When the Prepend feature is set to On, thepredefined prefix is inserted to the front ofthe number that you are dialing.
Except that the number is led by "*", "00","011" or the number contains "+".
Note: You can also use Prepend temporarilywhen the feature is set to Off. For example,enter the phone number from the homescreen and pressM > Add Prepend. The
speed dialEach phone number stored in Contacts isassigned a Speed Dial number, which you canuse to call that number.
1 From the home screen, use the keypad toenter the Speed Dial number assigned tothe phone number you want to call.
2 Press#.
3 PressS.
turbo dial
The first nine entries in your contacts are setfor turbo dial. They can be called by pressingand holding the speed dial number(1 through 9).
voice mail
Note: To receive voice mail messages,
selective dynamic group(SDG) calls
-
7/30/2019 Nntn7348a En
69/112
63calls
you must first set up a voice mailaccount with your service provider.
receive a message
When you receive a voice mail message, NewVoiceMail Message appears on the display.
To check voicemail messages pressaunder Call.
To dismiss the message notification pressO,ora under Back.
If the caller leaves a message, this iconyappears on the display, reminding you thatyou have a new message.
A SDG call is similar to a Private call, butis made to all members of a SDG list atonce. A SDG list is a group of Private IDs thatyou create using your phone. A SDG list mustcontain at least 2 members and can containup to 20 members.
You can create a SDG list for one call only orstore it to Contacts so you can call it any time.
You can use Send via PTT to send SDGlists to other phones that have thiscapability.
create SDG lists in contacts
Shortcut: From the home screen pressaunder Contcts.
1 Select [New SDG].
Tip: You can also create a SDG list byselecting [New Contact] and assigning theSDG contact type.
add private numbers
You can add Private IDs to a SDG list byselecting them from Contacts the recent
-
7/30/2019 Nntn7348a En
70/112
64 calls
If you want to assign a name to the SDGlist, enter the name.
Note: If you do not assign a name, theSDG list is named SDG followed by the
number of members in the SDG list. Forexample, SDG (8) for a SDG list with 8members.
2 Add Private IDs. See Adding Private
Numbers below.3 If you want to create a voice name for the
SDG list, select [Options] > Voice Name. Asdirected by the screen prompts, say andrepeat the voice name you want to assignto the SDG list. Speak clearly into themicrophone.
4 Pressa under Save.
selecting them from Contacts, the recent
calls list, or memo. You can add all membersin an existing SDG list by selecting the list.
You can select more than one member fromContacts and the recent calls list. A
checkmark appears next to each selecteditem.
Tip: To deselect a selected item, highlight itand pressO.
You can also enter Private IDs from thekeypad.
add members from Contacts,
the recent calls list, or Memo1 While creating a SDG list, select [Add
Member]or select [Add Number] and pressaunder Browse.
Tip: To move between Contacts, therecent calls list, and Memo, scroll leftor right.
remove members or SDG lists
remove a member from a SDG list
-
7/30/2019 Nntn7348a En
71/112
65calls
2 Scroll to the members you want fromContacts, the recent calls list, or Memo,and pressO. A checkmark appears nextto each selected member.
Tip: To deselect a selected member, highlightit and pressO.
3 Pressa under Done.
add members manually fromthe keypad
1 While creating a SDG list, select [AddNumber].
2 Enter the Private number using thekeypad.
1 From Contacts, scroll to the SDG list youwant to delete the member from.
2 Pressa under Edit.
3 Scroll to the member you want to
remove.4 PressM > Remove Member.
5 Pressa under Save.
remove all members from a SDG list1 From Contacts, scroll to the SDG list you
want to delete the member from.
2 Pressa under Edit.
3 PressM > Remove All.4 Pressa under Yes to confirm.
delete a SDG list from Contacts
1 Scroll to the SDG list you want to delete.
2 PressM > Delete SDG List
Enter or select a Private ID and add morePrivate IDs. start a SDG call with aprivate below.
-
7/30/2019 Nntn7348a En
72/112
66 calls
2 PressM > Delete SDG List.
make SDG Calls
1 From Contacts or the recent calls list,scroll to or select the SDG list you want.
orPress and holds until a prompt appearstelling you to say the voice name. Say thevoice name assigned to the SDG list you
want.or
From the home screen, press the numberon your keypad for the shortcut you
assigned to the SDG list you want.or
2 Push the PTT button.
start a SDG call with a private
You can start a SDG call with any Private ID
you want to call.Note: Choose the first Private ID that youwant in the SDG call:
1 From the home screen, enter the Private
ID.or
From the Contacts list, scroll to an entrycontaining the Private ID.
or
From recent calls list, scroll to an entrycontaining the Private ID.
2 PressM > Call SDG.
3 Add more Private IDs. See add privatenumbers on page 64.
SDG Call Details
During a SDG call, you can view details aboutthe other SDG list members, such as their
-
7/30/2019 Nntn7348a En
73/112
67calls
p g
If you want to save the SDG list you havecreated pressM > Store SDG.
or
If you do not want to save the SDG list,pressa under Done.
4 Push the PTT button to make the call.
SDG call Information
While you are in a SDG call, the followingappears on the screen:
The name of the SDG list
The name or the Private ID of theperson speaking
The number of participants in the SDGcall
name or Private ID, and their status on thecall. To view SDG call details, pressa underDetails.
In the SDG Call Details view, these icons
appear next to member names or Private IDs:T The member of the SDG list who is
speaking.
A A member of the SDG list who is activeon the SDG call, but not speaking.
O A member of the SDG list who hasexited the call.
U A member of the SDG list who could notbe reached on the SDG call.
u A member of the SDG list whose statusis unknown.
customize
-
7/30/2019 Nntn7348a En
74/112
68 customize
ring tonesTo set the ring tone your phone makes whenyou receive phone calls, call alerts, message
notifications, pictures sent using Send via PTTor Datebook reminders:
Note: Only ring tones stored in your phonesmemory are available in the ring tones list.
Not all audio files can be assigned as ringtones.
Find it:M > Ring Tones
1 Make sure Vibrate All is set to Off.
2 Scroll through the list of ring tones andselect the one you want to assign. Vibratesets your phone to vibrate instead of
making a sound; Silentsets your phone toneither vibrate nor make a sound.
Tip: Highlighting a ring tone lets you hearit.
3 Select the features you want to assign thering tone to.
4 When you are finished, press Done.
Note: This iconM appears on the display ifyou set your phone to Silent. This iconQappears on the display if you set the phone toVibrate All.
set your phone to vibrate
You can set your phone to vibrate instead ofmaking a sound when you receive all phonecalls, Private calls, group calls, call alerts,
messages notifications, pictures sent usingSend via PTT, and Datebook reminders.
Find it:M>Ring Tones >Vibrate All
1 Make sure Vibrate All is set to Off.
2 Select Vibrate from the list of ring tones.
3 Select the features you want to set to
-
7/30/2019 Nntn7348a En
75/112
69customize
1 Set this option to On or Locked.Setting this option to On lets you turnVibrate All off by pressing the up volumecontrol. Setting this option to Locked
requires you to press and hold the upvolume control to turn Vibrate All off. TheLocked option helps prevent you fromaccidentally turning Vibrate All off.
To set Vibrate All to On or Locked using the volumecontrols: Press the volume controls to turndown the volume as far as possible to setVibrate All to On. Continue to hold the downvolume control to set Vibrate All to Locked.
To set your phone to vibrate instead ofmaking a sound for some features but notothers:
Find it:M>Ring Tones
3 Select the features you want to set to
make no sound.4 When you are finished, pressa under
Done.
wallpaperSet a photo or picture as a wallpaper(background) image in your phones home
screen or throughout all menu screens.Find it:M > Settings > Display/Info > Wallpaper >Wallpaper.
To select a wallpaper image scroll through the
list of pictures and pressO to select thepicture of your choice.
Note: You can set the wallpaper to changeautomatically after a certain period of time by
turning on the Auto Cycle feature located in theWallpaper menu.
Daily Begin: Sets the beginning of your day.This is the earliest time of day displayed in
option
-
7/30/2019 Nntn7348a En
76/112
70 customize
backlightSet the amount of time that the display andjava apps. backlights remain on, or turn off thebacklight feature to extend battery life.
Find it:M > Settings > Display/Info > Backli