Post on 04-May-2023
DrAsan (July-2022)
1 / 46
CURRICULUM VITAE Name : Dr Asan Gani bin Abdul Muthalif, PhD, P.Eng., P.Tech.
Nationality : Malaysian)
Languages : Malay, English, and basic Arabic.
Current Position : (since Oct 2018)
Associate Professor Dept. of Mechanical and Industrial Eng. College of Engineering, Qatar University P.O. Box: 2713 - Doha, Qatar Tel : +974-4403 4336 Email : drasan@qu.edu.qa / asan@cantab.net
https://scholar.google.com.my/citations?hl=en&user=mdfsJNMAAAAJ https://www.scopus.com/authid/detail.uri?authorId=41762134100
Immediate past position:
Assoc. Professor, Dept. of Mechatronics Engineering (Full Professorship was approved by IIUM in May 2019-after joining QU)U)
& Dean – Centre for Postgraduate Studies, IIUM Rectory Building, Jalan Gombak, 53100, Kuala Lumpur. Email : asan@iium.edu.my ,http://staff.iium.edu.my/asan/
Academic Qualification:
1. PhD in Engineering, Cambridge University-UK, 2008
Postdoctoral Researcher: Cambridge University, UK (2008-2009)
2. MSc – Mechatronics Engineering, IIUM
3. Bachelor of Mechatronics Engineering (1st Class - Hons), IIUM
Research Interest:
1. Active control of Vibration, 2. Smart materials and Structures 3. Vibration based energy harvesting, 4. Mid- high frequency Vibration. 5. Semi-active suspension systems, 6. Statistical Energy Analysis (SEA) 7. Bio-Mechatronics and biomimetic systems
Product Development:
1. Design and Fabrication of “Vibration Faults Simulation System (VFSS), Client: Intekma Sdn Bhd, Vendor : AEIC, 2012
2. Design and fabrication of “VIBRATION FAULTS SIMULATOR (VFS)” Client : Tenaga Nasional Berhad (Malaysian electricity company), Vendor: Info-Trax Sdn Bhd., 2003
Policy Development :
‘National Policy on Science, Technology and Innovation 2021-2030’, Ministry of Science, Technology, & Innovation Malaysia, launched on 8-Dec-2020 (served as Working Group member)
Journal Editor: 1. Associate Editor: Journal of Vibration and Control (ISSN:1077-5463)- WoS-Q1; Since June 2020
2. Associate Editor: Journal of Low Frequency Noise, Vibration & Active Control (ISSN 0263-0923)- WoS-Q2; EB-Oct 2016, AE-Sept 2022
DrAsan (July-2022)
2 / 46
LICENSURES AND CERTIFICATIONS
1. Professional Engineer (P.Eng), Board of Engineers Malaysia (Reg. No: PE18571)- Since 2018
2. Professional Technologist (P.Tech), Malaysia Board of Technologist (Reg. No: PT18050050) - Since 2018
INTELLECTUAL PROPERTY
1. U.S. Provisional Patent Application (63355966), ‘Self-Adjusting rotating airfoil piezoelectric energy harvester for fluid-flow applications’, 27-June-2022. Asan Muthalif, Muhd Hafizh, J Renno, M. Paurobally.
2. Patent filed (PI 2016000202), ‘Angular Sensor’, T. Saleh, M. Asyraf, Md. Masud Rana, Asan GA Muthalif
3. Copyright filed (LY2016003748) : Kulliyyah Academic Integrated System (KAIS), Asan GA Muthalif, Md. N. Salleh, Z. Zulkeply.
CONSULTANCY
1. Consultant for ‘Support Peer Review for Program and Course Specifications for – Mechatronics Program’ – Sana’a University Client: Ministry of Higher Education and Scientific Research, Republic of Yemen Duration: July – Dec. 2014
2. Vibration Signature based Predictive Maintenance technique for Rotating Machinery Client: INTEKMA Eng Svc & Trdg Sdn Bhd, Duration: 24 July – 26 Dec 2012
3. Non-Propulsion Electrical Loads Control Strategy (NoPELCS) Client: PROTON BERHAD, Duration: Jan – May 2012
4. Vibration Faults Simulator for Predictive Maintenance Client: Tenaga Nasional Berhad (TNB) Vendor: Info-Trax Sdn Bhd., Duration: 1st July 2003 – 30th Nov. 2003
ADMINISTRATIVE ASSIGNMENTS
No Date Position
1. Jan 2018 – Dec. 2018
Dean, Centre for Postgraduate Studies, IIUM, Malaysia (University Senate member)
2. Jan 2017 – Dec. 2017
Deputy Director, Research Management Centre, IIUM, Malaysia
3. May 2013–June 2013
Covering Dean, Kulliyyah of Engineering, IIUM, Malaysia (Appointed as the covering dean for a cumulative period of more than 6 months during June 2012 – Dec 2016)
4. July 2012 – Jan 2017
Deputy Dean (Academic Affair), Kulliyyah of Engineering, IIUM
5. June 2010–June 2012
Head of Mechatronics Engineering dept., IIUM, Malaysia
6. July 2003–Sept 2004
Deputy Director, Advanced Engineering and Innovation Centre (Formerly known as Centre for Engineering Excellence)
7. July 2001–Sept 2004
College Coordinator for Engineering Industrial Training
DrAsan (July-2022)
3 / 46
PROFESSIONAL APPOINTMENTS / POSITIONS: 1. Aug 2022-Aug 2023 Facilitator/Panel - The Rating of Malaysian Higher Education
Institutions 2022
2. Apr 2015-Apr 2019 ASM Associate (Associate Fellow) – Academy of Sciences Malaysia
3. Since 2013 MQA Panel for Mechatronics Engineering programme, Malaysian Qualifications Agency
4. Jan 2018–Dec 2019 Committee member ‘Council of Deans of Postgraduate Studies’, by Director General of Higher Education, Malaysia
5. July 2012–Dec 2016 Member - Malaysian Council of Engineering Deans (MCED), by Ministry of Higher Education Malaysia
6. July2020- June2022 &Dec2015–Dec2019 (for 3rd term)
External Examiner -Bachelor of Electronic Engineering Technology (Industrial Automation) with Honors, Faculty of Engineering technology, Tun Hussein Onn University Malaysia
7. Aug2019-July2022 &Mar2014-Mar2019 (for 3rd term)
Panel for National ‘Higher Institution Centre of Excellence (HICoE)’, by Ministry of Education Malaysia
8. Mar. 2018 – Mar. 2020
Mentor for ‘PERMATApintar National Gifted Students’, by Prime Minister’s Dept. of Malaysia
9. April 2018- April 2019
Panel for ‘Ministry of Higher Education Scholarships’, by Ministry of Higher Education Malaysia
10. Nov 2017 – 2019 Working Group Member of ‘ST2: Development, Harnessing and Intensifying Talent for National Policy on Science, Technology and Innovation (NPSTI): Review and Formulation Study’, by Academy of Sciences Malaysia, Ministry of Science, Technology & Innovation Malaysia
11. 11th April 2017 Panel for ‘His Majesty the King’s Scholarship’, Section 2017/2018, Public Service Dept. of Malaysia
12. 24 Nov.2015 & 6 Nov. 2014
Panel for ‘Federal Training Prize Program and Fully Paid Study Leave without Scholarship of the Public Service Department’, Public Service Dept. of Malaysia, Putrajaya (for Sections 2015 & 2016)
13. 2015 - 2019 Member/Participant (selected for programme) ‘Academic leadership in Higher Education Institution’, by AKEPT- Ministry of Higher Education Malaysia.
14. 27 Oct. 2015 Panel for ‘Human Life Advancement Foundation (HLAF) Scholarships’, PWTC, Kuala Lumpur
DrAsan (July-2022)
4 / 46
PROFESSIONAL MEMBERSHIP: 1. Since 2016
M: 99-16 Senior Member IEEE–Institute of Electrical and Electronic Engineers (IEEE), MN 41277067
2. Since 1997 Member – American Society of Mechanical Engineers (ASME), MN 5838727
3. Since 2010 Senior Member–International Institute of Acoustics and Vibration (IIAV), MN 1275
4. Since 2012 Founding Member – Society of Vibration and Acoustic Malaysia (SVAM), MN: FM12 , (Committee Member: Apr 2012 - July 2013)
5. Since 2013 Life Member- Malaysian Society for Engineering and Technology (MySET), MN 01338
6. Since 2013 Life Member – Malaysian Invention and Design Society (MINDS), MN 2039
7. Since 2018 Graduate Technologist – Malaysia Board of Technologist (MBOT) (Reg. No: GT18050652)
8. Since 2001 Graduate Member – Board of Engineer Malaysia (BEM), (Reg. No: 35551A)
AWARDS / RECOGNITIONS: 1. ‘Vivsen’ project, won third place in the ‘9th Annual Innovation and
Entrepreneurship Contest’ , 30-March-2022, Qatar University
2. Best Paper presentation at ‘International Conference On Electronics, Instrumentation And Devices (ICEID2021)’, 24 June 2021, Technological University of Malaysia
3. Outstanding Contributor Journal Articles Indexed in Scopus and WOS Award By International Islamic University Malaysia, 2-Sept. 2016, at the Celebrating Research Excellence & Achievement Month (CREAM 2016)
4. University Innovation Award 2015 Asan G. A. Muthalif (Leader), Zuraifah Zolkepley, Ahmad Hidayat, Nur Huda, Siti Nor Alhana., By IIUM, 2-Oct. - 2015. (IRIIE 2015)
-
5. University Best Researcher Award By International Islamic University Malaysia, 2-Oct. - 2015. (IRIIE 2015)
-
6. ‘Optimization of Magnetic Particles to Design Energy Efficient Magnetorheological Fluid Damper for Prosthetic Limb’ Nor Hidayati Diyana Nordin, Asan G.A. Muthalif, by Kulliyyah of Engineering Research & Innovation Exhibition (KERIE) 2015, 27-28 Oct. 2015
Gold
7. The Best Research Findings of FRGS 2011 By Ministry of Education Malaysia and awarded RM 250K for extension works.
-
8. ‘Piezoelectric Based Broadband vibration energy Harvester with coupled magnets’ , Dauda Shehu Ibrahim, Asan G.A. Muthalif, Kulliyyah of Engineering Research & Innovation Exhibition (KERIE) 2014, 10 –Dec.- 2014
Bronze
9. ‘Semi-active Vibration Control Using Magneto-Rheological Elastomer (MRE)’ Pyae Phyo Aung @ Mohamed Hamzah, Asan G. A. Muthalif, Sara Mohammed Osman, by Kulliyyah Postgraduate Exhibition, Research and Innovation 2014 (KERIE 2013), 10 –Dec.- 2014
Bronze
DrAsan (July-2022)
5 / 46
10. Development of a New Chatter Control Method for Application in Turning Ummu Atiqah K. Mohamad, AKM Nurul Amin, Asan G. A. Muthalif Kulliyyah of Engineering Research & Innovation Exhibition (KERIE) 2013, 13 -June- 2013
Gold
11. ‘Enhancing µ-EDMing (electro-discharge machining) of doped silicon for various applications’ Aous Naji Rasheed, Tanveer Saleh, Asan G.A. Muthalif, by Kulliyyah of Engineering Research & Innovation Exhibition (KERIE) 2013, 13 -June- 2013
Bronze
12. Promising Researcher Award (Science, Engineering and Technology) University Level, Quality Day 2013, IIUM, 14 Mar. 2013
-
13. ‘Stair-Climbing Wheelchair (SCWC)’ Asan Gani Abdul Muthalif, Muhammad Fazreen Zainal, Mohamad Hilmi Mat Idris, By: IIUM Research, Invention and Innovation Exhibition 2013, 19-20 Feb 2013. (covered in local daily-Berita Harian on the 28th March 2013)
Bronze
14. Voted as ‘The Most Active Staff’ by Mechatronics Engineering student By: IIUM Mechatronics Dept, Sem 1 – 2012/2013
15. ‘Vibration Based Energy Harvesting System (EHS)’ Asan Gani Abdul Muthalif, Mohd Nor Fakhzan Mohd Kazim, By: IIUM Research, Invention and Innovation Exhibition 2012, 21-22 Feb 2012.
Gold
16. ‘Improving Free Space Optic (FSO) Communication using Active Vibration Isolation System’, Asan G.A. Muthalif, Khairiah Turahim, Syazwani Rahim, By: IIUM Research, Invention and Innovation Exhibition, 21-22 Feb 2012.
Bronze
17. ‘Novel Matlab-Based Low-Cost Autopilot’. Tijani I Bayo, Rini Akmeliawati, Ari Legowo, Asan G.Al Muthalif, By: IIUM Research, Invention and Innovation Exhibition 2012, 21-22 Feb 2012.
Bronze
18. ‘Efficient Prediction Error-Modeling (PEM) Approach to UAV Helicopter System Identification’ Tijani I Bayo, Rini Akmeliawati, Ari Legowo, Asan G.A Muthalif, By: IIUM Research, Invention and Innovation Exhibition 2012, 21-22 Feb 2012.
Bronze
19. ‘A new Method of Earthquake Monitoring and Prediction Using Unusual animal Behavior’, A. M. Aibinu, M.J.E Salami, Asan G.A Muthalif, R. Akmeliawati, W. Astuti, S. Khalidah, S. Badri, N. Sa’at, By: Malaysia Technology Expo 2012, 16/18 Feb 2012, Putra World Trade Centre, Malaysia
Bronze
20. 'A new method of earthquake monitoring and prediction using unusual animal behaviour', A. M. Aibinu, M. J. E. Salami, R. Akmelawati, A.Gani Muthalif, W. Astuti, S. Badris, S. Khalidah and N. Mohd Saat, By: IIUM Research, Invention and Innovation Exhibition 2011, 9-10/Feb/2011
Silver
21. 'Design and Implementation Of Active Mass Damper For Vibration Control' Ismail Ladele Ladipo, Dr. Asan Gani Muthalif, By: IIUM Research, Invention, and Innovation Exhibition 2011, 9-10/Feb/2011
Bronze
22. ‘Application of Piezoelectric Material in active vibration absorber’ Ahmad A.A. Bakar, Alif R.A Rahman, Asan Gani Abdul Muthalif, By: IIUM Research, Invention and Innovation Exhibition 2011, 9-10/Feb/2011
Bronze
23. 'Animal Sound Activity Detection Using Multi-Class Support Vector Machines' W. Astuti, A.M. Aibinu, MJE Salami, R. Akmelawati, and Asan GA Muthalif, By: IIUM Research,Invention and Innovation Exhibition 2011,9-10/Feb/2011
Bronze
DrAsan (July-2022)
6 / 46
24. ‘Auto Cruise Control’ IEE Inter-varsity Project Competition 2003/2004, supervised student project By: The institution of Electrical Engineers, May 7,2004 at University Malaya
Gold
25. IIUM Scholarships Award For B.Eng (96-00), M. Sc ( 00-03) and PhD (04-08: Ministry of Education)
-
26. Pingat Tunku (Tunku Gold Medal) – “Best Graduate from IIUM year 2000” By : Tunku Abdul Rahman Foundation (Ministry of Education Malaysia), 2001
Gold
27. IEM Gold Medal – “Best Engineering Student from IIUM” By: The Institution of Engineers Malaysia at its 42nd anniversary, 2001
Gold
28. Royal Education Award (Pingat Jaya Cemerlang) By : Majlis Raja-Raja Malaysia (The Kings Council of Malaysia), 2000
Royal Award
29. Sapura Holdings Award – “Best Student (Overall) in Engineering” By: Sapura Holdings at 16th IIUM Convocation Ceremony, 2000
-
30. Kosijaya Didactic Award - “Best Student (Academic) in Mechatronics Engineering” By: Kosijaya at 16th IIUM Convocation Ceremony, 2000
-
31. Dean’s List Award By: Kulliyah of Engineering, received for 7 out of 8 semesters at IIUM. This award is given for GPA achievement of 3.5(of 4) and above, 1996 - 2000
-
DrAsan (July-2022)
7 / 46
TEACHING DEVELOPMENTED COURSES AT IIUM & QATAR UNIVERSITY
Undergraduate Courses
1. MECH 4XX- Railway Instrumentation and Control (Qatar University) 2. MCT 4328- Vibration Analysis and Control (3 chr) 3. MCTE 4367- Random Vibration (3 chr) – 15/16-S1 4. MECH 4311- Mechanical Vibrations (3 chr) - 15/16-S1
Postgraduate Courses
5. MECH 6XXX Vibration Analysis and Control (Qatar University) 6. MCT 6212- Active control of Vibration (3 chr) 7. MCTE 6222- System Dynamics and Control (3 chr) 8. MCTE 6107- Mechanical Vibrations (3 chr)
TEACHING EXPERIENCES No Year Institution Position Courses
1. Since Oct
2018 Dept. of Mechanical and Industrial Engineering, Qatar University
Associate Professor
GENG200-Probability and Statistics for Engineers MECH221-Statics MECH222-Dynamics MECH339-Practical Training MECH321-Mechanical Mechanisms MECH361-Control Systems MECH330-Machine Design MECH323-Mechanical Design 1 MECH421-Mechanical Design 2 MECH480,487-Senior Project I MECH490,488-Senior Project II IENG498-Industrial Systems Design MECH412-Railway Instrumentation and Control MECH463-Graduation Honor Project MECH463-Mechatronics Sys. Design
2. Mar 2013- Dec 2018
Dept. of Mechatronics, IIUM
Associate Professor
Modern Control System, Control System 1, Vibration Analysis and Control, Mechanical Vibration (UG & PG), Integrated Design Project
3. Nov 2008-Mar 2013
Dept. of Mechatronics, IIUM
Assistant Professor
Vibration Analysis and Control, Mechanical Vibration, Signal and Systems, Modern control system, System Dynamics and Control
4. Sept 2008 -july 2009
Engineering Dept. Cambridge University
Teaching assistant
Tutored various courses and labs in undergraduate modules
DrAsan (July-2022)
8 / 46
5. 2004 - 2009
Cambridge colleges: St. Johns, Queens, Magdalene, Corpus Christi, Homerton, Fitzwilliam, Newnham, Wolfson
Supervisor / Tutor
Mechanical Vibrations, Linear Algebra & Probability, Vector Calculus, Mathematics, Linear systems and control, Systems and Control
6. 2004-2009
Private Tutor in Cambridge, UK
Teacher / Private tutor
GCSE and A-Level Mathematics for Edexcel, AQA, and OCR examination boards in the UK.
7. 2004-2005
Engineering Dept., Cambridge University
Lab Demonstrator
1A-Drawings and Mechanics lab
8. Nov 2003-Sep 2004 (Nov2008)
Dept. of Mechatronics, IIUM
Lecturer
Signal and system (ECE 2221), Signal and system analysis (MCT 2210)
9. Apr 2000-Oct 2003
Dept. of Mechatronics, IIUM
Matriculation Lecturer (Assistant Lecturer)
Tutored courses Control Systems (ECE3341 / MCT3210), Mechanical Vibration (MCT4170), Applied Digital Signal Processing (MCT4250), Digital Signal Processing (ECE3221), Theory of Machines (MCT2110)
10. Feb 1998-Apr 2001
Various Private Engineering Institutions in Klang Valley.
Lecturer (PT/FT)
Electronics (HND), Physical Science I, Engineering Design (HND), Computational Methods (Pre-HND), Computer Related Mathematics, Engineering Mathematics, Mathematics B (HND level), Engineering Mathematics
11. Feb 1997- Sept 1999
Kulliyyah of Engineering, IIUM
Tutor - Engineering Calculus I & II. - Engineering Mechanics--
Dynamics. 12. Dec 1995-
Dec 1996 Various Private Engineering colleges
Lecturer (PT/FT)
- Engineering Mathematics I & II. - Engineering Sciences.
13. Apr1992-Sept 2004
High Schools and tuition centres
Teacher / Private Tutor
-Additional and Modern Math. (SPM) - ‘A’& ‘O’ Level Mathematics - Matriculation Mathematics - Math. (PMR) - General Science (form 4 & 5) - Chemistry (SPM)
DrAsan (July-2022)
9 / 46
SUPERVISIONS POSTGRADUATE SUPERVISION: DOCTOR OF PHILOSOPHY (PhD)
No Student Title Role
1. Azni Nabela binti Wahid (G1322488)
High frequency vibration control and damping using piezoelectric transducers
Main SV Completed
2. Norhidayati Diyana Nordin (G1321102)
Development of prosthetic limb using MR fluid damper
Main SV Completed
3. Mohd Asyraf B. Mohd Razib (G1321803)
Investigation of Micro- Patterning Process of Carbon Nano Tube (CNT) Forest For Sensor Fabrication.
Chairman -SV Com
Completed
4. Ayman Mustafa Hassan
Salem (1722012611) Mechanical Dept. University Malaya
Semi-Active Vibration Isolator Using Hybrid Magnetorheological Elastomer/Fluid
Co-SV Ongoing
5. Farahiyah binti Jasni (kha130094) Biomedical Dept. University Malaya
Development of novel sensory system for smart prosthetic limbs
Co-SV Completed
6. Khairul Affendy Md Nor (ID:6574910), Mechanical Dept. The University of Auckland, NZ
Active and adaptive control of noise transmission in structures
Co-SV Completed
7. Chandra Sekharan Nataraj (G1322621)
Mathematical Modelling and Analysis of Non-Contact Power Transfer Using Multiple Resonant Receiving Coils
Co-SV Completed
8. Najiah Binti Nadir G1120572
Photochromism Behavior Prediction Using Statistical Approach
Co-SV Completed
9. Tijani Ismaila Bayo (G0927819)
Hybrid Control Scheme For Autonomous Helicopter For Disaster Monitoring.
Co-SV Completed
10. Winda Astuti (G1016744) Intelligent Embedded System For Earthquake And Tsunami Prediction Based On Animal Behavior.
Co-SV Completed
DrAsan (July-2022)
10 / 46
POSTGRADUATE SUPERVISION: MASTER OF SCIENCE/ENGINEERING 11. Abdelrahman Ihab Ali
(201602434)- Qatar Uni. ME A Novel Semi-active vibration isolator using hybrid Magnetorheological Fluid and Elastomer (MREF)
Main SV Ongoing
(09-2021)
12. Muhammad Hafizh (201605936)- Qatar Uni.-ME
A Hybrid Nonlinear Vibration Energy Harvester for Remote Sensing Applications
Main SV Ongoing
(01-2021)
13. Mohamed AbdulAziz Arab (201108785) Qatar Uni.-ME
Hybrid Piezoelectric-Electromagnetic Nonlinear Energy Harvester (HPEEH) from fluid-induced vibrations
Main SV Completed
14. Thaer Mahmoud Ibrahim Syam (201405457)- Qatar Uni.-ME
Semi-active Vibration Isolator in drilling using Magnetorheological Elastomer (MRE)
Main SV Completed
15. Muhammad Khusyaie bin mohd Razali (G1511615)-MSc(RM)
Parametric investigation to optimize dynamic range of magnetorheological damper for prosthetic limbs
Main SV Completed
16. Dauda Shehu Ibrahim (G1229115) -MSc(MM)
PZT based broadband vibration energy harvester with magnetic oscillators.
Main SV Completed
17. Aalya Banu (G1114838) -MSc(MM)
Robust control technique for Active Vibration Control of plate-like structures using smart materials
Main SV Completed
18. Sharmila Fathima (G1026156) -MSc(MM)
Parametric Investigation For Optimizing Dynamic Range Of Magnetorheological Fluid Dampers In Bio-Mechatronic Applications
Main SV Completed
19. Nor Hidayati Diyana binti Nordin (G1027042)-MSc(MM)
Optimal Piezoelectric Shape And Configuration For Vibration Energy Scavenging System
Main SV Completed
20. Khairul Affendy Bin Md Nor (G1020147) -MSc(MM)
Active Control of Plate Vibration Using Piezoelectric Patch
Main SV Completed
21. Azni Nabela binti Wahid (G1021752) -MSc(MM)
Active Vibration Control of Non-Deterministic Structure Using Piezoelectric Actuator
Main SV Completed
22. Syazwani Ab. Rahim (G0927110) -MSC(RM) (Collaboration with MIMOS)
Active Vibration Isolator Using Piezoelectric Actuator For Quantum Key Distribution (QKD) In Free Space Optic (FSO).
Main SV Completed
23. Khairiah Kamilah Turahim (G0927276) -MSC(RM) (Collaboration with MIMOS)
Active Vibration Isolator For FSO Using Electromagnetic Actuator.
Main SV Completed
24. Ladipo Ismail Ladele (G0926793) -MSC(MM)
Design And Implementation Of Active Mass Damper For Vibration Control
Main SV Completed
DrAsan (July-2022)
11 / 46
25. Mohd Nor Fakhzan Mohd Kazim (G0929461) -MSC(MM)
Analysis and Development of Vibration based Energy Harvesting System using Smart Material for Vehicles.
Main SV Completed
26. S.M Hasanul Banna Kasemi (G1017549) -MSC(MM)
Development of Experimental Model Of Magnetorheological Damper for Semi-Active Vibration Control
Main SV Completed
27. Md Saiful Islam (G1614391) -MSC(RM)
Fabrication and Characterization of Carbon Nanotube Paste Angular Sensor
Co-SV Completed
28. Muhammad Aminuddin Anwar Ali (G1425005) -MSc(RM)
Design and Control of Automatic Finger Extension based on Iris Mechanism for Hand Rehabilitation System
Co-SV Completed
29. Sams Jarin (G1438100) -MSc(MM)
Modelling and optimization of nano-powder mixed micro-WEDM process for doped silicon using artificial neural networks and genetic algorithm.
Co-SV Completed
30. Md.Masud Rana (G1416959) -MSc(MM)
Carbon Nano Tube (CNT) based Sensor Fabrication and characterization
Co-SV Completed
31. Aous Naji Rasheed (G1028035) -MSc(MM)
Enhancing µ-WEDming/EDMing (Wire/Electro-Discharge Machining) of Doped Silicon for Various Applications
Co-SV Completed
32. Ummu Atiqah Khairiyah binti Mohammad (G1127930) -MSMF(RM)
Development and Optimization of Chatter control during Turning Operation
Co-SV Completed
33. Farahiyah binti Jasni (G1011788) -MSc(MM)
Locomotion Gait Pattern Generator for Quadruped Walking Robot
Co-SV Completed
34. Faried Hasbullah (G0924493) -MSc(MM)
Ride quality analysis of Active suspension systems for off-road vehicle.
Co-SV Completed
35. Mohd Zamzuri Ab Rashid (G0823171) -MSc(MM)
Design and control of a unicycle mobile robot.
Co-SV Completed
36. Mahmudur Rahman (G1017085) -MSc(MM)
Design and Development Of Semi-Active Mr Fluid Damper For A Quarter-Car Model.
Co-SV Completed
37. Noor Amalina Ramli (G1019716) -MSc(MM)
Design and Simulation of MEMS SAW resonator in CMOS technology
Co-SV Completed
38. Nadira Jamil (G0827294) -MSc(MM)
Simulation and Modeling of SAW-Based Resonator for mass and impedance Sensing
Co-SV Completed
39. Ahmad Lufti bin Torla (G0926015) -MSc(MM)
On stability issue of low voltage efficient power delivery for bioimplantable biosensors under adverse operating conditions.
Co-SV Completed
40. Mohammed Abdul Qawi Zaid (G918001) -MSc(MM)
Development of an intelligent system for vibration based predictive maintenance
Co-SV Completed
DrAsan (July-2022)
12 / 46
UNDERGRADUATE HONOR COURSE (MAIN SUPERVISOR)
Student Title Status Ahmed Hegazi (201602411) MECH 463
Magnetorheological Elastomer flexible coupler to control torsional transmissibility
Fall & Spring 2019 (Completed)
UNDERGRADUATE SENIOR /FINAL YEAR PROJECTS (MAIN SUPERVISOR) No Students Title Status 1. Zarghaam Athar UlIslam
(201708586), Sayed Fatahillah (201707142), Talha A. Khan (201708756), Khalid M. Siddiqui, 201805155
Retractable Car Shade for parking system (Won 2nd place at Senior Design Contest, Mechanical Engineering, Qatar University)
Completed (Spring 21)
2. Khaled Ameen Mohamed Al-Zowkari (201601124) Abdulla Saed Al Yafei (201308733) Tha'er Zeyad Obaid Allouh (201702101) Abdalla Anwar Said Ahmed (201303716)
Standing wheelchair with a built-in climate control system (Won 1st place at Senior Design Contest, Mechanical Engineering, Qatar University)
Completed (Fall 21)
3. Mohamed Emam (201610333) Saad Ahmed Khan (201607952) Abdellatif Mashhour (201702361)
Magnetorheological Elastomer based Engine Mounting for semi-active Vibration isolation. (Won 2nd place at Senior Design Contest, Mechanical Engineering, Qatar University)
Completed (Spring 21)
4. Abdelrahman Ali (201602434) Ahmed Hegazi (201602411) Mohamed Radwan (201605247)
Design and development of a low-cost myoelectric prosthetic arm for trans-radial amputees (Won 1st place at Senior Design Contest, Mechanical Engineering and awarded QR 5k by Qatar University)
Completed (Spring 20)
5. Noora Ahmed Al-Hail (201403954) Aamna Tariq Iqbal (201513964) Manal Mohd Al-Shafi (201405923)
Design of Device for Vibration Harvesting and Vibration Control (IENG498 Industrial System Design)
Completed (Spring 19)
6. Muhamad Syafeeq Bin Zailee (1416231)
Engine mounting system using rheological elastomer
Completed
7. Safwan Azmi bin Hazziss (1415397)
Ionic Polymer Metal Composites (IPMC) based vibration energy harvesting
Completed (S2-17/18)
8. Siti Zahirah ibrahim (1418738) Smart multi-mode vibration absorber using Electromagnets
Completed (S2-17/18)
9. Wan Muhamad Aiman bin Wan Mohd Amin (1419335)
Design and development of piezoelectric based biosensor
Completed (S2-17/18)
DrAsan (July-2022)
13 / 46
10. Syahirah Nur Arina binti Sohaimi (1310270)
Self-powered semi-active suspension system
Completed (S2-16/17)
11. Fatin binti Amri (1313034) Design and development of a smart vibration absorber using shape memory alloys (SMA)
Completed (S2-16/17)
12. Nurul afiqah (1312142) Mechatronics technology in predictive maintenance methods
Completed (S2-16/17)
13. Wan Muhamad Rizal bin Wan Marzuki, 1227019
Semi-active control of torsional vibration using rheological elastomer
Completed (S1-16/17)
14. Athirah Nabila binti Ghazali, 1224634
Vibration energy scavenging using piezoelectric materials to power small devices
Completed (S1-16/17)
15. Adibah binti Mohamad Zulkefli, 1222956
Intelligent glove for suppression of rest tremor in Parkinson's disease.
Completed (S1-16/17)
16. Nik Nabihah Wan Md Supian, 1218552
Design and development of a flexible prosthetic ankle for Muslim when performing Salat
Completed (S2-15/16)
17. Farah Zahidah binti Norden,
1218420 Smart systems for monitoring electrical power usage at homes
Completed (S2-15/16)
18. Muhammad Abu Saiid, 1122419
Ball and plate balancing system Completed (S1-15/16)
19. Muhammed Burak Kirmaci, 1021245
Automotive suspension system using MR fluid dampers
Completed (S1-15/16)
20. Nasrul Hafizi Norhashim, 1125633
Smart helmet with rear mirror vision system.
Completed (S1-15/16)
21. Abdel Aziz Yousif, 1035797 Design and development of a gyroscope as a teaching tool
Completed (S2-14/15)
22. Aliyy Al Adil Moiz, 1119625 Semi-active control of torsional vibration using rheological damper
Completed (S2-14/15)
23. Naheed Rihan, 1113419 A self-tuneable dynamic vibration absorber
Completed (S2-14/15)
24. Afzanizan bin Jaffery, 1028915 Mechatronics technology in vibration based predictive maintenance
Completed (S2-14/15)
25. Ayad Ahmed, 1013755 Active Noise control in a car Completed (S2-14/15)
26. Abdul Manan Dar, 1016491 Development of a prosthetic limb using semi-active Magnetorheological fluid dampers
Completed (S2-13/14)
27. Nura ‘Adila binti Munauwir Vibration energy scavenging using smart materials to power small devices
Completed (S2-13/14)
28. Muhammad Al-Hafiz bin Muhammad Hanapi, 1018381
Automotive suspension system using MR fluid dampers
Completed (S2-13/14)
29. Muhammad Rahmad b. Adebi, 1018327
Design and Development of bladeless wind turbines
Completed (S2-13/14)
30. Ali Mohsen Alsabari, 0827549 Active noise control using loud speaker
Completed (S1-13/14)
31. Hamza Abdullah Hashi, 0828513
Development of semi-active control of torsional vibration system using Magnetorheological damper
Completed (S2-12/13)
DrAsan (July-2022)
14 / 46
32. Nor Fazlinda bt Alias, 0830568 Magnetorheological rubber for active mounting system : Prototype development
Completed (S2-12/13)
33. Khairul 'Aliaa binti Mohd Arpan, 0835768
Magnetorheological rubber for active mounting system : Control system development
Completed (S2-12/13)
34. Muhammad Fazreen, 0839391 Mohamad Hilmi, 0916537
Stair Climbing Wheelchair: Design and Development (Won Bronze Medal In IRIIE And Covered In Local Daily Berita Harian On The 28th March 2013)
Completed (S1-12/13)
35. Nur izatul nisha binti abdul rashid, 0825312 Jamaliah binti Kassim, 0828116
Piezoelectric based bio-Mechatronics device to help hearing impairment patients
Completed (S1-12/13)
36. Intan Farhanah bt Redzuan Albakri, 0827268 Ruhasmila binti Abdullah, 0823638
Active suspension system for quarter car model: Prototype model development
Completed (S1-12/13)
37. Mohd Ashraf bin Mohd Yazit, 0829729 Amirul Ashraff A. Majid, 0828553
Design and development of a smart vibration absorber using shape memory alloys (SMA) (Won The Best Fyp 1 Award)
Completed (S1-12/13)
38. Nurul Farhana binti Shuaib – 0725934 Kawthar Abdul Rahman – 0727618
Smart system for monitoring electrical power usage at homes (Won The Best Fyp Poster Award)
Completed (2011/2012)
39. Nurul Ashikin Othman – 0724260 Asma’ Zubir – 0724136
Design and control of micro UAV using smart materials
Completed (2011/2012)
40. Nurul `Izzah– 0720222 Siti Farihan Mansor – 0721746
Predictive maintenance using vibration signature
Completed (2011/2012)
41. Aiman Omar Bajaber – 0628667 Ayman sir-alkhatim – 0719535
Design and development of active suspension system for quarter car model
Completed (2011/2012)
42. Dzairul Hafiz Ishak- 0631435 Haris Shafiq Miswan - 0717965
Self-powered solar tracking system Completed (2010/2011)
43. Abdul Fatah bin Samsudin, 0628479 Mohammed Hafidz bin Tumiran, 0623383
Distance electrical meter reading device
Completed (2010/2011)
44. Alif Roozaime bin Ab Rahman, 0533847 Ahmad Asyraf bin Abu Bakar, 0531775
Applications of piezoelectric materials in vibration control
Completed (2010/2011)
DrAsan (July-2022)
15 / 46
UNDERGRADUATE FINAL YEAR PROJECTS (CO-SUPERVISOR)
NO Student’s matric no Title Status
1 Abdulrahman Elsayed (201407944) Naif Almarri (201407133) Ali Alathbi (201307894)
Design, Build and Test A Gesture Controlled Robotic Arm for A Nursing Medical Assistant Device
Completed (Fall 21)
2 Muhammad Haidar Bin Hassan Basri - 0715273 Muhamad Sobirin Bin Abdul Karim- 0714979
Design and Development of 3 DOF of Articulated Robot using Hydraulic Actuators
Completed (2011/2012)
3 Ahmad Khairul Azman Mohd Salleh- 0726959 Ahmad Taqiyuddin Muhd Radzi- 0728333
Automatic Dinar and Dirham coins identification using Vibration Analysis and Parametric Modelling Techniques
Completed (2011/2012)
4 Khairul Nizar Syazwan -0712193 Muhammad Farhat -0638283
Development of Automated Chocolate Cookies Machine
Completed (2010/2011)
5 Mohd Khairi Bin Badrul Hisham-0622449 Aimanihsan Bin Ahmad Tajuddin -0539037
Design and Development of a Stirling Engine
Completed (2010/2011)
6 Seri Alifah Binti Dahnel-0632888 Rabiatuladawiah Bt Abu Hanifah -0634960
Vehicle Accident Prevention Using Driver Fatigue Detection (Eye Blink) Sensor
Completed (2010/2011)
UNDERGRADUATE INTEGRATED DESIGN PROJECT
SCENARIO SUPERVISORS STUDENTS
Smart School Bag (S2-14/15)
1. Dr. Asan (Coordinator)
1. 1125633, Nasrul Hafizi Bin Norhashim (Project Leader)
2. 1127931, Muhammad Arif Amnan Mohd Riffin 3. 0930503, Mohammed Elamin Elsadig Mohamedin
Automatic Car Shade Parking System (S2-13/14)
1. Dr. Asan (Coordinator) 2. Dr. Zaw Zaw Htike 3. Dr. Tanveer Saleh
1. 1011559, Muhammad Farhan Bin Rahmat (Project Leader)
2. 0938211, Baten Md. Shihab, (Team Manager) 3. 1024737, Mohd Nur Adzizad Bin Mahamad,
(Mechanical) 4. 0732009, Syed Muhammad Afif Bin Syed Ahmad
Shah, (EE),
Campus Transportation (S1-13/14)
1. Dr. Asan (Coordinator) 2. Dr. Md. Mozasser 3. Dr. Zulkifli Zainal
1. 1019235, Muhammad Ashraf Fahmi B Badrol Hisham
2. 1012085, Muhammed Shameem B Showkathali 3. 1017739, Abdul Hafiz Bin Zakaria 4. 927549, Muhammad Haris Bin Ahmad Fauzi 5. 1012984, Syafiqah Binti Rani 6. 1011908, Nur Fazatul Ain Binti Mohd Fauzi
DrAsan (July-2022)
16 / 46
UNDERGRADUATE SEMINAR SUPERVISION No Title Student’s matric no Comp
1 Vibration Based Energy Harvesting using Piezoelectric Materials
Muhammad Safwan Abd Rahman, 1228261 Muhammad Takwa Amir, 1220379
S1–15/16
2 Smart structures in mechatronics systems
Mohamad Zarif bin Zakaria, 1011855 Awg shahzreen, 1013129
S1–12/13
3 BioMechatronics and Its applications
Tengku Muhamad Afif, 1013277 Mohamad Afif, 1015269
S1–12/13
4 Smart power monitoring systems for homes
Mohd Fadir bin Shafie-0919369 Mohamad Hilmi bin mat Idris-0916537
S2–11/12
5 Vibration based energy harvesting
Muhammad Fazreen Bin Zainal-0839391 Mohd Mursyidi bin Mustafa-0910631
S2–11/12
6 BioMechatronics and its applications
Muhaimin bin Anuar-0833447 Mohd Rizuan bin Tormin-0835585
S2–11/12
7 Magnetorheological fluid dampers and its applications
Khairul Aliaa binti mohd arpan -0835768 Nor Fazlinda binti alias-0830568
S2–11/12
8 Smart buildings to resist earthquake
Awadh Ali Awadh-0810723 Ahmad Eissa-0734597
S1–11/12
9 BioMechatronics Yaser Ahmed Al-Ameri-0725007 Najib-0836529
S1–11/12
10 Smart materials and their applications in Mechatronics
Muhammad Dawud Mohamed Noohu-0727099 Nasrullah b. Abdul Rahman-0821077
S1–11/12
11 Vibration based energy harvesting using piezoelectric materials
Asha Laila bt Ismail-0814076 Nur Ainaa bt Mokhtar-0822578
S1–11/12
12 Vibration based energy harvesting
Faizun Ezliza bt Ali azhar-0814868 Imaliana bt Muzni-0811944
S2–10/11
13 Biomimetic Robots
Safiah Ayuni binti Muhamad Udin-0815196 Shafidatul aziah binti samsuddin-0812474
S2–10/11
14 Biomechatronics
Nur izatul nisha binti abdul Rashid-0825312 Jamaliah binti Kassim-0828116
S2–10/11
15 Smart Material and Its Application In Vibration Control
Muhammad Ajwad Bin Koya -0817929 Muhammad Salman Shahul Hameed-0713691
S1–10/11
16 Energy Harvesting Technology
Maisarah Bt. Ishak-0815452 Mardhiah Bt. Mustapha-0810346 Ayunni Safwan Bt. Saidin-0813460
S1–10/11
DrAsan (July-2022)
17 / 46
SCHOLARSHIP / RESEARCH PUBLICATIONS Technical Reports: 1. Asan G.A. Muthalif, Active control of High-frequency vibration, PhD-2008 2. Asan G.A. Muthalif, Active Vibration control using Piezoelectric Materials, MSc-2003 3. Asan G.A. Muthalif, Online Condition Monitoring using Vibration signature, BEng.
Books / Edited Books 1. Asan G.A. Muthalif, Amir A. Shafie, Siti F. Toha, Iskandar A. Mahmood (2011),
“Mechatronics Book Series: System design and Signal Processing - Volume 1”, IIUM Press, ISBN: 978-967-418-173-4
2. Asan G.A. Muthalif, Amir A. Shafie, Momoh J.E. Salami (2011), “Mechatronics Book Series – Selected Papers From ICOM’01, ICOM’05 and ICOM’08”, IIUM Press, ISBN: 978-967-0225-68-5
3. Siti F. Toha, Iskandar A. Mahmood, Asan G.A. Muthalif (2011), “Mechatronics Engineering Projects: Theory and Applications”, IIUM Press,ISBN: 978967-418192-5
Book chapter: 1. N Kallingal, MS Sajna, MS Sha, M Geetha, IM Islampure, NP Devarapalli, MR Maurya,
Asan Muthalif, S Al-Madeed, R RamluVidule, A Srinivas, KK Sadasivuni (2022), ‘Millimeter and Microwave Sensing Techniques for Diagnosis of Diabetes’, Advanced Bioscience and Biosystems for Detection and Management of Diabetes. Springer Series on Bio- and Neurosystems, vol 13. Springer, Cham. https://doi.org/10.1007/978-3-030-99728-1_10
2. Azni N. Wahid, Asan G. A. Muthalif, & Khairul A. M. Nor (2015), Dynamic effects of piezoelectric patch actuators on vibrational response of non-deterministic structures: Modelling and simulations, Book Chapter for Recent Trends in Physics of Material Science and Technology, Springer Series in Materials Science, Vol. 204, ISBN 978-981-287-127-5 https://doi.org/10.1007/978-981-287-128-2_20
3. Dzairul Hafiz, Haris Shafiq, Asan G.A. Muthalif, ‘Self Powered Solar Tracking System’, Mechatronics Engineering Projects: Theory and Applications”, IIUM Press, pp. 41-65 , ISBN: 978-967-418-192-5
4. A. M. Aibinu, M. J. E. Salami, Asan Gani Muthalif, Sumaiyah Mior Badri, Sarah Khalidah and Nuruleeman Saat, ‘Development of Experimental Station for Earthquake Prediction’, Mechatronics Book Series: System design and Signal Processing - Volume 1, IIUM Press, pp. 109-116, ISBN: 978-967-418-173-4
5. A. M. Aibinu, W. Astuti, M. J. E. Salami, R. Akmelawati, Asan Gani Muthalif, ‘Earthquake Prediction and Monitoring Using Unusual Animal Behavior’, Mechatronics Book Series: System design and Signal Processing - Volume 1, IIUM Press, pp. 134-140, ISBN: 978-967-418-173-4
6. Nur Izatulnisha A.Rashid, Jamaliah Kassim and Asan G. A. Muthalif, 'A Brief Overview of Biomechatronics and Its Applications', Mechatronics Book Series: System design and Signal Processing - Volume 2, IIUM Press, pp. 1-6, ISBN: 978-967-418-132-1
7. Asan G. A. Muthalif, Dzairul Hafiz and Haris Shafiq, ‘Self-Powered Solar Tracking System Part 1: System Modeling and Hardware Selections’, Mechatronics Book Series:
DrAsan (July-2022)
18 / 46
System design and Signal Processing - Volume 2, IIUM Press, pp. 7-13, ISBN: 978-967-418-132-1
8. Asan G. A. Muthalif, Dzairul Hafiz and Haris Shafiq, ‘Self-Powered Solar Tracking System Part 2: System Design’, Mechatronics Book Series: System design and Signal Processing - Volume 2, IIUM Press, pp. 14-18, ISBN: 978-967-418-132-1
9. Asan G. A. Muthalif, Dzairul Hafiz and Haris Shafiq, ‘Self-Powered Solar Tracking System Part 3: System Integration and Testing’, Mechatronics Book Series: System design and Signal Processing - Volume 2, IIUM Press, pp. 19-24, ISBN: 978-967-418-132-1
10. Kawthar A. Rahman, Asan G. A. Muthalif and Nurul F. Shua’ib, 'Smart System For Monitoring Electrical Power Usage at Homes, Mechatronics Book Series: System design and Signal Processing - Volume 2, IIUM Press, pp. 25-29, ISBN: 978-967-418-132-1
11. Siti F. Mansor, Asan G. A. Muthalif and Nurul ‘I. Zaman, 'Vibration Based Predictive Maintenance: Common Rotating Machinery Faults and Their Signatures' Mechatronics Book Series: System design and Signal Processing - Volume 2, IIUM Press, pp. 30-37, ISBN: 978-967-418-132-1
12. Aiman O. Bajaber, Asan G. A. Muthalif, Ayman S.I. Elzubair, 'Active suspension system: Part 1 - Mathematical Modelling', Mechatronics Book Series: Control and Intelligent systems, pp. 319-323, ISBN: 978-967-418-176-5).
13. Aiman O. Bajaber, Asan G. A. Muthalif, Ayman S.I. Elzubair, 'Active suspension system: Part 2 - Controller Design and Simulation', Mechatronics Book Series: Control and Intelligent systems, pp. 324-328, ISBN: 978-967-418-176-5).
14. A. M. Aibinu, Asan G. Muthalif, M. J. E. Salami, A. Taqiyuddin M. Radzi, A. Khairul Azman M. Salleh, ‘ Dinar and Dirham Coin Identification Using Vibration Signature’, Mechatronics Book Series: Control and Intelligent systems, pp. 46-51, ISBN: 978-967-418-176-5).
15. Ahmad Lutfi Torla, Sheroz Khan, Asan Gani Abdul Muthalif , ‘Spikes blocking and surge protection’, Principle of Transducer Devices and Components. IIUM Press, Kuala Lumpur, pp. 83-88 . ISBN 978-967-418-172-7
16. Ahmad Lutfi Torla, Sheroz Khan, Asan Gani Abdul Muthalif, ‘Voltage supply and voltage regulation’, Principle of Transducer Devices and Components. IIUM Press, Kuala Lumpur, pp. 89-97 . ISBN 978-967-418-172-7
17. IB Tijani, R Akmeliawati, A Legowo, AGA Muthalif, ‘Optimized LQR controller synthesis for 3DOF helicopter using multiobjective differential evaluation (mode), Computational Intelligence in Robust Control. IIUM Press, Kuala Lumpur, pp. 58-92, ISBN 978-967-418-196-3
18. Ahmad Lutfi Torla, Sheroz Khan, Asan Gani Abdul Muthalif, ‘ Full-wave rectification of a low-voltage source ‘, Principle of Transducer Devices and Components. IIUM Press, Kuala Lumpur, pp. 99-106 . ISBN 978-967-418-172-7
DrAsan (July-2022)
19 / 46
PUBLISHED JOURNALS WoS INDEXED
1. MN Hasan, N Nayan, M Nafea, Asan Muthalif, MSM Ali (2022), ‘Novel structural
design of wearable thermoelectric generator with vertically oriented thermoelements’, Energy Vol. 256, https://doi.org/10.1016/j.energy.2022.125032
2. MN Hasan, MIA Asri, T Saleh, Asan Muthalif, MSM Ali (2022), ‘Wearable thermoelectric generator with vertically aligned PEDOT:PSS and carbon nanotubes thermoelements for energy harvesting’, International Journal of Energy Research, 1- 13, https://doi.org/10.1002/er.8283
3. M Geetha, MR Maurya, S Al-maadeed, Asan Muthalif, KK Sadasivuni (2022),’ High-Precision Nonenzymatic Electrochemical Glucose Sensing Based on CNTs/CuO Nanocomposite’, Journal of Electronic Materials, https://doi.org/10.1007/s11664-022-09727-z
4. Abdelrahman Ali, Ayman Salem, Asan G.A. Muthalif *, Rahizar Ramli, Sabariah Julai (2022), "Development of a Performance-Enhanced Hybrid Magnetorheological Elastomer-Fluid for Semi-Active Vibration Isolation: Static and Dynamic Experimental Characterization", Materials, 15(9), 3238; https://doi.org/10.3390/ma15093238
5. K.S. Mohamed, F. Amri, M. Elboraey, N.H.D. Nordin, Asan G.A. Muthalif* (2022), ‘Adaptive Electromagnetic Vibration Absorber for a Multimode Structure’, Strojniski Vestnik- Journal of Mechanical Engineering, 68(3), 191-199. http://dx.doi.org/10.5545/sv-jme.2021.7458
6. Asan G.A Muthalif*, Muhammad Hafizh, Jamil Renno, M.R Paurobally (2022), ‘A hybrid piezoelectric-electromagnetic energy harvester from vortex-induced vibrations in fluid-flow; the influence of boundary condition in tuning the harvester’, Energy Conversion and Management https://doi.org/10.1016/j.enconman.2022.115371
7. N.H.D Nordin, Asan G.A. Muthalif*, M. Khusyaie M Razali, Abdelrahman Ali, Ayman Salem (2022), ‘Development and implementation of energy-efficient Magnetorheological Fluid bypass damper for prosthetics limbs using a fuzzy-logic controller’, IEEE Access https://doi.org/10.1109/ACCESS.2022.3149893
8. Omar T. Shady, Jamil Renno*, M. Shadi Mohamed, Sadok Sassi, Asan Muthalif (2022), ‘On the Suitability of Vibration Acceptance Criteria of Process Pipework’, Advances in Materials Science and Engineering, V-2022, https://doi.org/10.1155/2022/2168818
9. Mohammed FM Hussein*, Jamil Renno, Asan G.A. Muthalif (2021), ‘Energy Harvesting from Railway Slab-Tracks with Continuous Slabs’, Journal of Vibration and Control, December 2021, https://doi.org/10.1177/10775463211054259
10. Ayman M.H. Salem, Abderlahman Ali, Asan G.A. Muthalif*, Rahizar Ramli, Sabariah J Julaihi (2021), ‘Magnetorheological Elastomer Based Flexible Metamaterials Coupler for Broadband Longitudinal Vibration Isolation: Modelling and Experimental Verification, IEEE Access https://doi.org/10.1109/ACCESS.2021.3134267
11. Thaer M.I. Syam, Asan G. A. Muthalif* (2021), ‘Magnetorheological Elastomer based torsional vibration isolator for application in a prototype drilling shaft’, Journal of Low Frequency Noise, Vibration & Active Control, 2021, Vol. 0(0) 1–25 https://journals.sagepub.com/doi/10.1177/14613484211044627
DrAsan (July-2022)
20 / 46
12. Asan G.A. Muthalif*, A. Ali, J. Renno, A.N. Wahid, K. A.M. Nor, N.H. Diyana Nordin (2021), ‘Geometrical Investigation of Piezoelectric Patches for Broadband Energy Harvesting in Non-Deterministic Composite Plates’, Materials 14(23) 7370 https://doi.org/10.3390/ma14237370
13. Asan G.A Muthalif*, Muhammad Hafizh, Jamil Renno, M.R Paurobally (2021), ‘An Enhanced Hybrid Piezoelectric-Electromagnetic Energy Harvester Using Dual-Mass System for Vortex-Induced Vibration’, Journal of Vibration and Control, https://doi.org/10.1177/10775463211041875
14. Asan G.A. Muthalif*, Khairul A.M. Nor, Azni N.Wahid, Abdelrahman Ali (2021), ‘Optimization of Piezoelectric Sensor-Actuator for Plate Vibration Control Using Evolutionary Computation: Modelling, Simulation and Experimentation’, IEEE Access https://doi.org/10.1109/ACCESS.2021.3096972
15. Asan G.A. Muthalif*, M.K.M. Razali, N.H. Diyana Nordin and S.B.A. Hamid (2021), "Parametric Estimation from Empirical Data Using Particle Swarm Optimization Method for Different Magnetorheological Damper Models", IEEE Access, doi: https://doi.org/10.1109/ACCESS.2021.3080432
16. Thaer M.I. Syam, Ahmed A.A. Hegazi, Asan G.A. Muthalif*, Yousif Badri (2021), “Magnetorheological Elastomer-Based Variable Stiffness Flexible Coupling for Vibration Isolation”, Transactions of the Canadian Society for Mechanical Engineering https://cdnsciencepub.com/doi/full/10.1139/tcsme-2021-0007
17. M. Hafizh, Asan G.A. Muthalif*, J. Renno, M.R Paurobally, M.A. Arab, I. Bahadur, H. Ouakad (2021), “A Hybrid Piezoelectric-Electromagnetic Non-Linear Vibration Energy Harvester Excited by Fluid Flow”, Comptes rendus Mechanics, V349(1), p 65-81, https://doi.org/10.5802/crmeca.74
18. Asan G.A. Muthalif*, Azni Wahid (2021), “Optimal Piezoelectric Shunt Dampers for Non-Deterministic Substructure Vibration Control: Estimation and Parametric Investigation”, Nature Research- Scientific Reports- Vol 11 (4642). https://doi.org/10.1038/s41598-021-84097-w
19. A. Ali, Asan G.A. Muthalif*, J. Renno (2021), “Broadband vibration energy harvesting from a non-deterministic system: Performance of different piezoelectric patch shapes", Materials Research Express Vol. 8(2), https://doi.org/10.1088/2053-1591/abe063
20. Thaer M. I. Syam. Asan. G. A. Muthalif, Ayman Salem, Ahmed Hegazi (2020), “3D numerical modelling and analysis of a magneto rheological elastomer (MRE)”. Journal of Vibroengineering , Vol.22(5), p.1-15, https://doi.org/10.21595/jve.2020.21377
21. Azni N Wahid, Asan G.A. Muthalif* (2020), ‘Estimation and Measurement of Effective Line Mobility on a Non-Deterministic Thin Plate Excited by a Piezoelectric Patch’, Journal of Vibroengineering, Vol.22(1), p.98-110. https://doi.org/10.21595/jve.2019.20865
22. A.J.H. Mohideen, A.J. Rosli, M.F. Mohamad Hanif, N.H.H. Mohd Zaki, H.F. Husman, M. A., Abdul Muthalif, A. G., & Kumar, D. (2020).’ Pavement Condition Analysis Via Vehicle Mounted Accelerometer Data’, IIUM Engineering Journal, 21(1), 73-84 https://doi.org/10.31436/iiumej.v21i1.1223
23. T. Saleh, Sams Jarin, Asan G.A. Muthalif, M. Yeakub Ali, M. Bhuiyan (2018), ‘Towards achieving nano finish on Silicon (Si) wafer by μ-Wire Electro-Discharge Machining", The International Journal of Advanced Manufacturing Technology 99:3005. https://doi.org/10.1007/s00170-018-2692-4
DrAsan (July-2022)
21 / 46
24. N.H. Diyana Nordin, Asan G.A. Muthalif*, M. Khusyaie (2018) “Control Of Transtibial Prosthetic Limb With MRF Damper Using Fuzzy-Pid”, Journal of Low Frequency Noise, Vibration and Active Control, 37(4) https://doi.org/10.1177/1461348418766171
25. M.R.M. Asyraf, T. Saleh, Saiful Islam, Masud Rana, Asan G.A. Muthalif (2018), ‘Optical characterization of tip bended Vertically Aligned Carbon Nanotubes array’, Chemical Physics Letters, 711, 37–41. https://doi.org/10.1016/j.cplett.2018.09.011
26. C. Nataraj, S. Khan, M. H. Habaebi, Asan G.A. Muthalif (2018), 'General Analysis Of Resonance Coupled Wireless Power Transfer (Wpt) Using Inductive Coils', Journal Tehnički vjesnik/Technical Gazette 25 (3), 720-726 https://doi.org/10.17559/TV-20160105041434
27. Nor F. Alias, Asan G.A. Muthalif, Khairul A.M. Arpan and N.H. Diyana Nordin (2018), ’Experimental Investigation of Static Properties of Magnetorheological Elastomer’, Iran. J. Sci. Technol. Trans. Mech. Eng. 42(2), 185-197 https://doi.org/10.1007/s40997-017-0081-5
28. C. Nataraj, S.Khan, M.H.Habaebi, Asan G.A. Muthalif, R.Lakshmanan, (2017)”Development Of Wireless Power Transfer System Using Resonance Principle WithSecurity Features”, IIUM Engineering Journal, 18(2), 117-127. https://doi.org/10.31436/iiumej.v18i2.651
29. Aalya Banu, Asan G.A. Muthalif, (2017) "Robust vibration control of flexible panel: modeling and simulation", World Journal of Engineering, 14(5), 433-442 https://doi.org/10.1108/WJE-10-2016-0102
30. M.R.M.Asyraf, M.Rana, T.Saleh, H.D.E.Fan, A.T.Koch, A.Nojeh, K.Takahata, A.G.A Muthalif (2017), ‘Optical Anisotropy in Micromechanically Rolled Carbon Nanotube Forest’, Electronic Materials Letters, 13(5), 442-448 https://doi.org/10.1007/s13391-017-6422-0
31. Dauda Sh. Ibrahim, Asan G.A. Muthalif *, N.H. Diyana Nordin,Tanveer Saleh (2017), ‘Comparative Study of Conventional and Magnetically Coupled Piezoelectric Energy Harvester to Optimize Output Voltage and Bandwidth’, Microsystem Technologies, 23 (7), 2663–2674 https://doi.org/10.1007/s00542-016-3066-1
32. Asan G.A. Muthalif *, Hasanul B. Kasemi, N.H. Diyana Nordin, M. M. Rashid, M Khusyaie M Razali (2017),‘Semi-Active Vibration Control Using Experimental Model Of Magnetorheological Damper With Adaptive Fuzzy-PID Controller’, Smart Structures and Systems, 20(1), 85-97 https://doi.org/10.12989/sss.2017.20.1.085
33. Masud Rana, T. Saleh, M.R. Mohd Asyraf, Asan GA Muthalif (2017), ‘Empirical modeling of micromechanical bending process of vertically aligned carbon nanotube forest using response surface methodology’, Cogent Engineering, 4(1),
https://doi.org/10.1080/23311916.2017.1347078
34. Hamza A. Hashi, Asan G. A. Muthalif *, N.H. Diyana Nordin (2016), ‘Dynamic Tuning of Torsional Transmissibility using Magnetorheological Elastomer: Modelling and Experimental Verification’, Iran. J. Sci. Technol. Trans. Mech. Eng. 40 (3), 181–187 https://doi.org/10.1007/s40997-016-0024-6
35. Masud Rana, M.R. Mohd Asyraf, T. Saleh, Asan GA Muthalif (2016), ‘Investigation of anisotropic reflectance from densified arrays of vertically aligned carbon nanotube forests (VACNTs)’, Chemical Physics Letters, 658, 343-346 https://doi.org/10.1016/j.cplett.2016.06.074
DrAsan (July-2022)
22 / 46
36. Farahiyah Jasni, Nur Azah Hamzaid, Asan G. A. Muthalif, Zafirah Zakaria, Hanie N.Shasmin, Ng Siew-Cheok (2016), ‘In-Socket Sensory System for Transfemoral Amputees Using Piezoelectric Sensors: An Efficacy Study’, IEEE/ASME Transactions on Mechatronics, 21(5) 2466 – 2476, https://doi.org/10.1109/TMECH.2016.2578679
37. Masud Rana, MAsyraf MRazib, T. Saleh, Asan G.A. Muthalif (2016), ‘Enhancement of reflectance of densified vertically aligned carbon nanotube forests’, Carbon Letters 18, 67-70 http://dx.doi.org/10.5714/CL.2016.18.067
38. Tanveer Saleh, Aous N. Rasheed, Asan G.A. Muthalif (2015), ‘Experimental study on improving μ -WEDM and μ –EDM of doped silicon by temporary metallic coating’, The International Journal of Advanced Manufacturing Technology, 78(9-12) 1651-1663 https://doi.org/10.1007/s00170-014-6732-4
39. Asan G.A. Muthalif *, N.H. Diyana Nordin (2015), ‘ Optimal piezoelectric beam shape for single and broadband vibration energy harvesting: Modelling, simulation and experimental results’, Mechanical Systems and Signal Processing , 54-55, 417–426 https://doi.org/10.1016/j.ymssp.2014.07.014
40. Banu, A., Muthalif, A.G.A * (2015), ‘Estimating perturbation in eigenvalues for robust vibration controller design: analytical derivation and simulation’, Int. J. Engineering Systems Modelling and Simulation, 7(2) 95–102 https://doi.org/10.1504/IJESMS.2015.068655
41. Ismaila B. Tijani Rini Akmeliawati Ari Legowo Agus Budiyono Asan G. Abdul Muthalif , (2014),"Hybrid DE-PEM algorithm for identification of UAV helicopter", Aircraft Engineering and Aerospace Technology: An International Journal, 86 (5) 385- 405 https://doi.org/10.1108/AEAT-11-2012-0226
42. Asan G.A. Muthalif *, Azni N. Wahid, Khairul A. M. Nor (2014), ‘Estimating Ensemble Average Power Delivered by a Piezoelectric Patch Actuator to a Non-deterministic Subsystem’ ,Journal of Sound and Vibration, 333(4) 1149–1162 https://doi.org/10.1016/j.jsv.2013.10.012
43. Khairul A. M. Nor, Asan G. A. Muthalif *, Azni N. Wahid (2013), 'ANT colony optimization for controller and sensor-actuator location in active vibration control', Journal of Low Frequency Noise, Vibration and Active Control, 32 (4), 293-308 https://doi.org/10.1260%2F0263-0923.32.4.293
44. M.N Fakhzan, Asan G. A. Muthalif * (2013), ‘Harvesting vibration energy using piezoelectric material: modelling, simulation and experimental verifications’, Mechatronics, 23 (1) 61–66, https://doi.org/10.1016/j.mechatronics.2012.10.009 (25 MOST DOWNLOADED ARTICLE)
45. Ismail L. Ladipo, Asan G. A. Muthalif (2012), ‘Active Dynamic Vibration Absorber For Broadband Control of A Multi-Mode System: Simulation and Experimental Verification’, Journal of Low Frequency Noise, Vibration and Active Control, 31(3), 159-173 https://doi.org/10.1260%2F0263-0923.31.3.159
46. Asan G.A Muthalif, Robin S. Langley (2012), “Active Control Of High-Frequency Vibration: Optimization Using The Hybrid Modelling Method”, Journal of Sound and Vibration, 331(13), 2969–2983 https://doi.org/10.1016/j.jsv.2012.02.012 (MOST DOWNLOADED ARTICLE)
47. Tijani I.B, Rini Akmeliawati, Ari Legowo, Mahmud Iwan, and Asan Gani (2011), “H∞ Robust Controller for Autonomous Helicopter Hovering Control”, Aircraft Engineering and Aerospace Technology: An international Journal, 83(6) https://doi.org/10.1108/00022661111173243
DrAsan (July-2022)
23 / 46
48. Asan Gani, M.J.E Salami, M.D Raisuddin Khan (2006), “Compensated Inverse PID Controller for Active Vibration Control with Piezoelectric Patches: Modelling, Simulation and Implementation”, IIUM Engineering Journal, 7(2) https://doi.org/10.31436/iiumej.v7i2.82
49. Asan Gani, MJE Salami (2004), Vibration Faults Simulation System (VFSS): A Lab Equipment to Aid Teaching Of Mechatronics Courses, International Journal of Engineering Education, 20(1), 61-69, http://repository.elizadeuniversity.edu.ng/jspui/handle/20.500.12398/489
SCOPUS INDEXED 50. Thaer Syams, Asan Muthalif* (2020), "Hysteresis behaviour of different
magnetorheological elastomer models: modelling and simulation", VibroengineeringPROCEDIA, Vol. 31, 2020, p. 7-14. https://doi.org/10.21595/vp.2020.21408
51. Abdullah Al Mamun*, Asan G.A. Muthalif, Zuraida Ahmad, Ahmad Faris Ismail,Kamsiah Ismail and Md. Abdul Maleque (2020),’Islamisation of Engineering Education– A Case at IIUM’, Universal Journal of Educational Research, Vol 8(2): 355-361,https://doi.org/10.13189/ujer.2020.080204
52. Adibah Zulkefli, Asan Muthalif * , Diyana Nordin, Thaer Syam (2019),’ Intelligentglove for suppression of resting tremor in Parkinson’s disease’, VibroengineeringPROCEDIA, Vol. 29, p. 176-181 https://doi.org/10.21595/vp.2019.21078
53. Wan M.R.W. Marzuki, Asan G.A. Muthalif*, N.H. Diyana Nordin (2018), “Semi-Active Torsional Vibration Control Utilizing Magnetorheological Elastomer”, Vibration in Physical Systems, 29, 1-8
54. M. Khusyaie, Asan G. A. Muthalif *, N. H. Diyana Nordin, Syamsul Bahrin (2017)‘Improved Parameter Estimation for MRF Models for Varying Current’, Advanced ScienceLetters, 23(11),11002-11006(5) https://doi.org/10.1166/asl.2017.10207
55. C. Nataraj, Sheroz Khan, Mohammed H Habaebi, Asan G. A. Muthalif (2017) ‘Analysis of Mutual Inductance and Coupling Factor of Inductively Coupled Coils For WirelessElectricity, ARPN Journal of Engineering and Applied Sciences- Vol. 12, No. 13, July2017http://www.arpnjournals.org/jeas/research_papers/rp_2017/jeas_0717_6161.pdf
56. S. Jarin, T. Saleh, M. Rana, A. G. A. Muthalif, M. Y. Ali (2017), “An ExperimentalInvestigation on the Effect of Nanopowder for Micro-Wire Electro Discharge Machiningof Gold Coated Silicon”, Procedia Engineering, 184, 171-177, https://doi.org/10.1016/j.proeng.2017.04.082
57. Masud Rana, Masyraf Mrazib, T. Saleh, Asan GA Muthalif (2015), ‘Development Of An Angle Sensor Using Optical Polarizer’, ARPN Journal of Engineering and Applied Sciences, 10(23) 17416-17420
58. Dauda Sh. Ibrahim, Asan G.A. Muthalif *, Tanveer Saleh (2015), ‘A Piezoelectric based Energy harvester with Magnetic Interactions: Modelling and simulation’, Advanced Materials Research, 1115, 549–554 https://doi.org/10.4028/www.scientific.net/AMR.1115.549
59. MM Ferdaus, MM Rashid, MMI Bhuiyan, Asan GA Muthalif (2014), ‘Design andPerformance Evaluationof a Self-Controlled Magneto-Rheological Damper’,International Journal of Robotics and Mechatronics, 1 (2), 74-80
60. Mohd Kazim MNF, Raman S, Shafie M.H., Mohd Nasir N.F, Asan G.A. Muthalif (2014), ‘A complete system modelling of Piezoelectric Energy Harvester (PEH) with SiliconCarbide (SiC) Used as cantilever base’, Jurnal Teknologi (ISSN 2180–3722), 69 (8) 47-52 https://doi.org/10.11113/jt.v69.3295
DrAsan (July-2022)
24 / 46
61. Sharmila Fathima, Asan G.A Muthalif, Md.Raisuddin Khan (2014), ‘Investigation ofAnnular Gap Size for Optimizing the Dynamic Range of MR Damper using ComsolMultiphysics Software’, Applied Mechanics and Materials, 606, 187-192 https://doi.org/10.4028/www.scientific.net/AMM.606.187
62. Ummu A.K. Mohamad, A.K.M. Nurul Amin, Muammer D. Arif, Asan G.A. Muthalif (2013), ‘Influence of Magnetic Field on Chip Serration Frequency for Turning Stainless Steel AISI 304’, Applied Mechanics and Materials, 394, 217-221 https://doi.org/10.4028/www.scientific.net/AMM.394.217
63. Rasheed, A.N., Muthalif, A.G.A., Saleh, T. (2013),’Enhancing μ-wedming (wire electro-discharge machining) of polished silicon wafer by conductive coating’, Journal of Manufacturing Technology Research, 5(1-2), 1-17 http://www.novapublishers.org/catalog/product_info.php?products_id=47675
64. Ummu A.K. Mohamad, A.K.M. Nurul Amin, Muammer D. Arif, Asan G.A. Muthalif (2013), ‘Machinability Improvement for Stainless Steel AISI 304 in Turning by Applying Magnetically Damped Cutting’, Applied Mechanics and Materials, 393, 177-182, https://doi.org/10.4028/www.scientific.net/AMM.393.177
65. A.K.M. Nurul Amin,Ummu A.K. Mohamad, Muammer D. Arif, Asan G.A. Muthalif (2013), ‘Comparison Vibration Amplitude for Magnetic Damping in Turning of Stainless Steel AISI 304’, Applied Mechanics and Materials, 394, 251-255 https://doi.org/10.4028/www.scientific.net/AMM.394.251
66. Azni N Wahid, Asan G A Muthalif * , Khairul A M Nor (2013),’Power Input to non-deterministic Subsystems via Piezoelectric Patch Actuators: Effect of the patch size and location’, Journal of Physics: Conference Series (ISSN 1742-6588) 423- 012065 http://doi.org/10.1088/1742-6596/423/1/012065
67. KK Turahim, AGA Muthalif, SA Rahim (2012), ‘Design and Fabrication of ActiveVibration Isolation System for Free Space Optics Communication’, Advanced MaterialsResearch 576, 753-756 https://doi.org/10.4028/www.scientific.net/AMR.576.753
68. Babul Salam Ksm Kader Ibrahim, N. Aziah M. A., Salmiah Ahmad, Rini Akmeliawati, Nizam H.M.I., Asan G.A. Muthalif, Siti Fauziah Toha (2012), ‘Fuzzy-based temperature and humidity control for HV AC of electric vehicle’, Procedia Engineering, 41, 904-910 https://doi.org/10.1016/j.proeng.2012.07.261
69. Zalifah Ramli, Asan G. A. Muthalif, Amir A. Shafie (2012), “Parallel Manipulator for Auto Tracking System: Virtual Prototyping using LabVIEW- Solidworks”, Journal of Advanced Materials Research, 576, 777-780 https://doi.org/10.4028/www.scientific.net/AMR.576.777
70. N.H. Diyana, Asan G.A. Muthalif, M.N. Fakhzan, A.N.Nordin (2012), ‘Vibration Energy harvesting using single and comb-shaped piezoelectric beam structures: Modeling and Simulation’, Procedia Engineering, 41, 1228 – 1234 https://doi.org/10.1016/j.proeng.2012.07.305
71. Ismail L. Ladipo, Asan G.A. Muthalif (2012), ‘Wideband Vibration Control in Multi Degree of Freedom System: Experimental Verification Using Labview’, Procedia Engineering, 41, 1235 – 1243 https://doi.org/10.1016/j.proeng.2012.07.306
72. Banna Kasemi, Asan G. A. Muthalif *, M. Mahbubur Rashid, Sharmila Fathima (2012), ‘Fuzzy-PID Controller for Semi-Active Vibration Control Using Magnetorheological Fluid Damper’, Procedia Engineering, 41, 1221 – 1227 https://doi.org/10.1016/j.proeng.2012.07.304
73. Mahmudur Rahman, Muhammad Mahbubur Rashid, Asan G.A. Muthalif, Banna Kasemi (2012), “Evaluation of Different Control Policies of Semi-Active MR Fluid Damper of a Quarter-Car Model”, Applied Mechanics and Materials, 165, 310-315, https://doi.org/10.4028/www.scientific.net/AMM.165.310
DrAsan (July-2022)
25 / 46
74. Syazwani A. Rahim, Asan G.A. Muthalif, Khairiah K. Turahim (2011), “Active Vibration Isolation System for Free Space Optic Communication: Virtual Prototyping using LabVIEW-SolidWorks”, Applied Mechanics and Materials, 105 – 107 , 733-737 https://doi.org/10.4028/www.scientific.net/AMM.105-107.733
75. Asan G.A Muthalif (2011), “Optimal Damper Location For Mid-High Frequency Vibration Control On Built-Up Structures: Case Study Using VA One”, Applied Mechanics and Materials, 105 – 107, 705-709 https://doi.org/10.4028/www.scientific.net/AMM.105-107.705
76. Khairul A. M. Nor, Asan G. A. Muthalif *, Azni N. Wahid (2014), ‘Active Vibration Control using Piezoelectric Actuator: Implementation of Ant Colony Optimization Technique in Virtual Experimentation’, International Journal of Simulation Systems, Science and Technology (IJSSST), 15 (3), 57-62 http://ijssst.info/Vol-15/No-3/cover-15-3.htm
REFEREED JOURNALS 77. M.I. Jaafar, HMMM Rabah, NHD Nordin*, Asan Muthalif, Azni N Wahid (2021),
‘Voltage Generation in Piezoelectric Energy Harvesting with Magnet: FEA Simulation and Experimental Analysis, UTHM-Journal of Science and Technology, 13(2) https://penerbit.uthm.edu.my/ojs/index.php/JST/article/view/8581
78. Muhammad Hafizh, Asan Muthalif*, Jamil Renno, M.R Paurobally (2021), ‘A Nonlinear Vibration Energy Harvester for Remote Sensing Applications with Bandwidth Enhancement Excited by Fluid Flow’, Elektrika Journal of Electrical Engineering (Won best presentation award at ICEID2021) https://elektrika.utm.my/index.php/ELEKTRIKA_Journal/article/view/292
79. Thaer M.I.Syam, Asan G.A.Muthalif, Ayman M.H.Salem, Abdelrahman Ali, Yousif Badri (2021), ‘Base excitation vibration isolation utilizing magnetorheological elastomer models: a simulation study’, Elektrika Journal of Electrical Engineering https://elektrika.utm.my/index.php/ELEKTRIKA_Journal/article/view/293
80. M. Khusyaie, Asan G.A. Muthalif *, N. H. Diyana Nordin (2018), ‘Estimation of Parameter for Different Magnetorheological Fluids Model for Varying Current’, International Journal of Computer and Electrical Engineering (IJCEE), 10(2), 127-134 http://doi.org/10.17706/IJCEE.2018.10.2.127-134
81. Ag M.A. Asneh, Asan G.A. Muthalif, Azni N. Wahid, Ahmad Jazlan, Noor H.H.M Hanif (2017),” Piezoelectric Based Broadband Nonlinear Vibration Energy Harvester Using Multiple Magnets”, International Journal of Industrial Electronics and Electrical Engineering, 5(12)
82. Azni N. Wahid, Asan G. A. Muthalif, Khairul A. M. Nor. (2016), “Investigating Negative Capacitance Shunt Circuit for Broadband Vibration Damping and Utilizing ACO for Optimization”, International Journal of Circuits and Electronics, 1, 168-173 https://www.iaras.org/iaras/journals/ijce
CONFERENCE PROCEEDINGS (Scopus indexed) 1. Muhammad Hafizh*, Asan G.A Muthalif, Jamil Renno, M.R Paurobally (2022), ‘Airfoil-
Based Self-Adjustable Piezoelectric Energy Harvester In Fluid-Flow Applications For Performance Optimization’, 28th International Congress on Sound and Vibration, 24-28 July 2022, Singapore (Accepted - In press)
DrAsan (July-2022)
26 / 46
2. Ali Abdelrahman*, Asan G.A Muthalif, Salem Ayman, Syam Thaer (2022), ‘Magnetorheological Elastomer-Based Flexible Coupling For Torsional Vibration Isolation’, 28th International Congress on Sound and Vibration, 24-28 July 2022, Singapore (Accepted - In press)
3. Shahd Elshafei, Mohammed Hussein, Jamil Renno, Asan Muthalif (2021), ‘Energy Harvesting From Railway Vibrations – A Numerical Study Based On Beam-On-Elastic-Foundation Under Quasi-Static Loading’, 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2021), 28-30 June 2021, Streamed from Athens, Greece, https://doi.org/10.7712/120121.8792.18773
4. N. Rihan, Asan G.A. Muthalif*, Thaer M.I. Syam, N.H.D Nordin (2021), ‘Suppression of Tremors in Parkinson's Patients Using a Dynamic Vibration Absorber’, Innovative Manufacturing, Mechatronics & Materials Forum 2020 (iM3F 2020), 6 Aug 2020, Universiti Malaysia Pahang, Lecture Notes in Electrical Engineering, Vol 730, pp 509-516. https://doi.org/10.1007/978-981-33-4597-3_46
5. Saiful Islam, Tanveer Saleh, Marshad Latief, M.R.M Asyraf and Asan GA Muthalif (2019),’ Prototype of single degree of freedom optical resolver’, 4th International Conference on Mechanical, Automotive and Aerospace Engineering, IOP Conference Series: Materials Science and Engineering Vol 488(1), https://doi.org/10.1088/1757-899X/488/1/012004
6. S. A. Rahim, Asan G.A. Muthalif*, K.K. Turahim, NHD Nordin (2019), ‘Active Vibration Isolation System (AVIS) using a Voice Coil Actuator to improve Free Space Optics Communication’, 2019 10th IEEE Control and System Graduate Research Colloquium (ICSGRC), 2 -3 August 2019, Shah Alam, Malaysia https://doi.org/10.1109/ICSGRC.2019.8837053
7. NAA Majid, Asan G.A. Muthalif (2017), ‘Mechatronics technology in predictive maintenance method’, 6th International Conference on Mechatronics(ICOM17), 8–9 August 2017, Kuala Lumpur, Malaysia IOP Conference Series , https://doi.org/10.1088/1757-899X/260/1/012006
8. Sams Jarin, T. Saleh, Moinul Bhuiyan, Asan GA Muthalif, Mohammad Yeakub Ali (2017), ‘An Improved Machining Process of Polished Silicon Using Nano Powder Mixed Micro-wire Electro Discharge Machining, 2017 World Congress on Micro and Nano Manufacturing (WCMNM 2017), Kaohsiung, Taiwan, 27-30 Mar. 2017
9. C Nataraj, Sheroz Khan, M. H. Habaebi, Asan G.A. Muthalif, D. Naidu, S. K. Selvaperumal (2016),’ Hybrid of Conical and Spiral Approach for Wireless Power Transfer’, 2016 IEEE Student Conference on Research and Development (SCOReD), Putrajaya Marriott Hotel, Malaysia, 13-14 Dec. 2016 https://doi.org/10.1109/SCORED.2016.7810053
10 Chandrasekharan N, Sheroz Khan, M.H. Habaebi, Asan G.A. Muthalif, Atika Arshad (2016), ‘Resonant Coils Analysis for Inductively Coupled Wireless Power Transfer Applications’, 2016 IEEE International Instrumentation and Measurement Technology Conference (I2MTC2016), 23-26 May 2016, Taipei Taiwan. https://doi.org/10.1109/I2MTC.2016.7520343
11 N.H. Diyana Nordin, Asan G.A. Muthalif, Tanveer Saleh, Norsinnira Z. Azlan (2015), “Optimal Particle Ratio to Maximize the Dynamic Range of Magnetorheological Fluid (MRF) Damper for Prosthetic Limb”, IEEE 10th Asian Control Conference 2015, Kota Kinabalu, Malaysia, 31st May- 3rd June 2015 https://ieeexplore.ieee.org/document/7244789
DrAsan (July-2022)
27 / 46
12 M. N. Fakhzan., M. K., Nasrul F. M. N., S. Raman, Asan G. A. Muthalif (2015), ‘Preliminary work for SiC-based piezoelectric energy harvester with mathematical modelling and simulation study’, International Conference on Mathematics, Engineering and Industrial Applications 2014, (ICoMEIA2014), 28-30 May 2014 Penang Malaysia, https://doi.org/10.1063/1.4915774
13 Aous Naji Rasheed, Asan G. A. Muthalif, Tanveer Saleh (2014), ‘Improving μ-wire electro-discharge machining operation of polished silicon wafer by conductive coating’, 9th International Conference On Micromanufacturing (ICOMM2014), Nanyang Technological University, Singapore, March 25-28, 2014 http://digital.library.wisc.edu/1793/68989
14 Khairul A. M. Nor, Asan G. A. Muthalif, & Azni N. Wahid (2014), 'Optimization in Active Vibration Control: Virtual Experimentation Using COMSOL Multiphysics - MATLAB Integration’, 5th International Conference on Intelligent Systems, Modelling and Simulation, ISMS2014, Langkawi Malaysia, 27-29 Jan 2014 https://doi.org/10.1109/ISMS.2014.71
15 Dauda Sh. Ibrahim, Asan G.A. Muthalif, Tanveer Saleh (2014), ‘Piezoelectric based vibration energy harvester with tip attraction magnetic force: modeling and simulation’, 2014 International Conference on Mathematics and Computers in Sciences and Industry (MCSI 2014), Varna, Bulgaria, September 13-15, 2014 (Invited Paper) http://www.inase.org/library/2014/books/bypaper/MCSI/MCSI-10.pdf
16 Ferdaus, M.M. , Rashid, M.M. , Bhuiyan, M.M.I. , Muthalif, A.G.A., Hasan, M.R (2013), ‘Novel design of a self-powered and self-sensing magneto-rheological damper’, 5th International Conference on Mechatronics (ICOM2013), 2-4 July 2013, Kuala Lumpur IOP Conference Series 53(1) https://doi.org/10.1088/1757-899X/53/1/012048
17 Torla, A.L., Khan, S., Muthalif, A.G., Azman, A.W., Mustafah, Y.M (2013), ‘Low voltage DC power supply with spike-blocking features’, 2013 IEEE International Instrumentation and Measurement Technology Conference I2MTC 2013, Minneapolis, United States; 6-9 May 2013, https://doi.org/10.1109/I2MTC.2013.6555596
18 Khairul A. M. Nor, Asan G. A. Muthalif, & Azni N. Wahid (2013), ‘Active Control of Vibration : Using Ant Colony Optimization Technique’, International Conference on Modern Trends in Science, Engineering and Technology 2013 (ICMTSET 2013), Dubai UAE, 25-26 Sept. 2013 https://publish.pothi.com/preview/?sku=ebook2343
19 Salmiah Ahmad, Asan G.A. Muthalif, Maizirwan Mel (2013),” Industrial Training Outcomes: Kulliyyah of Engineering Practice As A Case Study, International Conference on Engineering Education 2013 (ICEE2013), Madinah, Kingdom of Saudi Arabia, 22-25 December 2013
20 Nadir, N , Wahid, Z, Shafie, A.A., Muthalif, A.G.A, Malek, M.Z.A, Aziz, N.M.A.N.A., Zainuddin, M.T., Islam, N.Z.M (2013), ‘Development of real time experimental system for investigating photochromic response to UV irradiation’, 5th International Conference on Mechatronics, ICOM2013, 2-4 July 2013 Kuala Lumpur, IOP Conference Series 53(1) https://doi.org/10.1088/1757-899X/53/1/012083
21 N. H. Diyana, Asan G. A. Muthalif , ‘Comb-Shaped Piezoelectric Beam Configuration for Wideband Vibration Based Energy Scavenging: Analytical And Simulation Results’, 20th International Congress on Sound and Vibration (ICSV20), Bangkok, Thailand, 7-11 July 2013
22 Ahmad Lutfi Torla, Sheroz Khan, Asan G. A. Muthalif (2012), ‘Regulation of Stable Low Voltage Power Supply Through Phase Angle Modulation: Simulation Details’, 4th International Conference on Computer and Communication Engineering, Kuala Lumpur, 3-5 July 2012. https://doi.org/10.1109/ICCCE.2012.6271312
DrAsan (July-2022)
28 / 46
23 Ahmad Lutfi Torla, Sheroz Khan, Asan G. A. Muthalif (2012), ‘Ripple Voltage and Its Elimination in Low Voltage Power Supply’, 4th International Conference on Computer and Communication Engineering, Kuala Lumpur, 3-5 July 2012. https://doi.org/10.1109/ICCCE.2012.6271311
24 Torla, L., Khan, S., Muthalif, A.G. (2012), 'Analysis of phase-modulated low voltage regulation with variable impedance/capacitance’, Volume 2, 2012, Pages 1111-1114, 20th IMEKO World Congress 2012; Busan; South Korea; 9-14 September 2012 http://www.proceedings.com/17937.html
25 Asan G. A. Muthalif, Khairiah K. Turahim and Syazwani Ab. Rahim (2012), ‘Active Vibration Isolation System to Improve Free Space Optics Communication’, 2012 International Conference on Information Technology and Software Engineering, 8-10 Dec. 2012, Beijing China. Springer Lecture Notes in Electrical Engineering (ISSN 1876-1100) 211, 369-378 https://doi.org/10.1007/978-3-642-34522-7_40
26 Hamza Baali, Rini Akmeliawati, Momoh J E Salami, Musa Aibinu, Asan Gani (2011), "Transform Based Approach for ECG Period Normalization", 38th Annual Scientific Conference of Computing in Cardiology, Hangzhou China, 18-21 Sept 2011 https://ieeexplore.ieee.org/abstract/document/6164620
27 Banna Kasemi, Asan G.A. Muthalif, M.M. Rashid, Mahmudur Rahman (2011)," Optimizing Dynamic Range of Magnetorheological Fluid Dampers: Modeling and Simulation", 2011 4th International Conference on Mechatronics (ICOM), 17-19 May 2011, Kuala Lumpur, Malaysia https://doi.org/10.1109/ICOM.2011.5937187
28 Ismail Ladipo, Asan G.A. Muthalif, Alif Rozaime, Ahmad Asyraf (2011), "Design And Development of An Active Mass Damper for Broadband Vibration Control", 2011 4th International Conference on Mechatronics (ICOM), 17-19 May 2011, Kuala Lumpur, Malaysia https://doi.org/10.1109/ICOM.2011.5937112
29 Tijani I.B., Rini Akmeliawati, Asan G.A. Muthalif, Ari Legowo (2011), "Optimization of PID controller for Flexible link system using a Pareto-based Multi-Objective differential (PMODE) evolution", 2011 4th International Conference on Mechatronics (ICOM), 17-19 May 2011, Kuala Lumpur, Malaysia https://doi.org/10.1109/ICOM.2011.5937190
30 M.N Fakhzan, Asan G. A. Muthalif (2011), "Vibration Based Energy Harvesting using Piezoelectric Material", 2011 4th International Conference on Mechatronics (ICOM), 17-19 May 2011, Kuala Lumpur, Malaysia https://doi.org/10.1109/ICOM.2011.5937182
31 W. Astuti, A.M. Aibinu, M. J. E Salami, R. Akmelawati, and Asan G.A. Muthalif (2011)" Animal Sound Activity Detection Using Multi-Class Support Vector Machines", 2011 4th International Conference on Mechatronics (ICOM), 17-19 May 2011, Kuala Lumpur, Malaysia https://doi.org/10.1109/ICOM.2011.5937122
32 IB Tijani, Rini Akmeliawati, Ari Legowo, Mahmud Iwan, AG Muthalif (2011), "Robust H-infinity controller synthesis using multi-objectives differential evolution algorithm (MODE) for two-mass-spring system", 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO), Kuala Lumpur, 19-21 April 2011 https://doi.org/10.1109/ICMSAO.2011.5775610
33 Khairiah K. Turahim, Asan G. A. Muthalif, Syazwani A. Rahim, 'Active Vibration Isolation System for Free Space Optics Communication: Hardware and Controller design', 1st International Conference and Exhibition of Women Engineer (ICEWE2011), Kuantan Pahang, Malaysia, 20 - 22 November 2011 http://umpir.ump.edu.my/id/eprint/16607 (Unpublished)
34 Tijani I.B, Rini Akmeliawati, Ari Legowo, Mahmud Iwan, and Asan Gani (2010) “H-infinity Robust Controller for a Small Scale Autonomous UAV Helicopter in Hovering ”, 6th International Conference on Intelligent Unmanned Systems, Bali, Indonesia, Nov 3 - 5, 2010 http://ojs.unsysdigital.com/index.php/icius/issue/view/22
DrAsan (July-2022)
29 / 46
35 A.Gani, R.S.Langley (2006), "Active control of high frequency vibration in uncertain structures", 13th International Congress in Sound and Vibration, Vienna-Austria, July 2-6, 2006 http://publications.eng.cam.ac.uk/596128/
36 Asan Gani, M.J.E Salami, Md. Raisuddin Khan (2003), “Active suppression of vibration modes with piezoelectric patches: Modelling, Simulation and Experimentation”, IASTED conference on Applied Simulation and Modeling (ASM 2003), pp. 454-459, Marbella , Spain, Sept 3-5, 2003. http://repository.elizadeuniversity.edu.ng/jspui/handle/20.500.12398/540
37 Asan Gani, M.J.E Salami, Md. Raisuddin Khan (2003), “Active Vibration Control of a Beam with Piezoelectric Patches: Real-time Implementation with xPC target”, IEEE – Conference on Control Applications (CCA 2003), Vol. I, pp. 538-544, Istanbul, June 23-25, 2003 https://doi.org/10.1109/CCA.2003.1223494
38 Asan Gani, MJE Salami (2002), “Vibration Faults Simulation System (VFSS) : A system for teaching and training on fault detection and diagnosis”, The 2nd Students Conference on Research and Development (SCOReD)- IEEE, pp. 15-18, Shah Alam-Malaysia, July 16-17, 2002 https://doi.org/10.1109/SCORED.2002.1033044
39 Asan Gani, MJE Salami (2002), “A LabVIEW based Data Acquisition system for Vibration monitoring and analysis”, The 2nd Students Conference on Research and Development (SCOReD)-IEEE, pp.62-65, Shah Alam-Malaysia, July 16-17, 2002 https://doi.org/10.1109/SCORED.2002.1033044
40 MJE Salami, Asan Gani, T. Pervez (2000); “Machine Condition Monitoring and Fault Diagnosis Using Spectral Analysis Techniques”, Proceedings of the First International Conference on Mechatronics, Malaysia, Vol. II, pp. 690-698, Kuala Lumpur Feb 12-13, 2000. http://repository.elizadeuniversity.edu.ng/jspui/handle/20.500.12398/474
RESEARCH GRANTS No Title, Grant name & Amount Role,Period,
Start, Status
1. Design and Development of a Dynamic Vibration Absorber for a MDOF Building Prototype (QUNSPP-(CEN)-2022-519), QR 22,500
Lead PI, 1/9/2022 -15/3/2023 Ongoing
2. A Novel Semi-Active Vibration Isolator Using Hybrid Magnetorheological Fluid and Elastomer (QUST-2-CENG-2022-679), QR 14,000
Lead PI, 20/8/2022 -5/1/2023 Ongoing
3. Vortex-Induced Vibration based Hybrid Piezoelectric-Electromagnetic Oscillator Nonlinear Energy Harvester (QUST-1-CENG-2022-321), QR 14,000
Lead PI, 3m, Dec 2021, Completed
4. A Novel Semi-active vibration isolator using hybrid Magnetorheological Fluid and Elastomer, Graduate Assistantship Grant (QUGA), QR 187,200 (Student’s wage+tuition)
Lead PI, 2y, Sept 2021, Ongoing
5. Non-invasive wearable multisensory solutions towards diagnosing metabolic disorders: Diabetes, Hypertension, and Hyper Cholesteremia (ID: 345), QU Collaborative Grant, QR 210,000.
PI, 2y, Feb 2021, Ongoing
DrAsan (July-2022)
30 / 46
6. A Hybrid Nonlinear Vibration Energy Harvester for Remote Sensing Applications (IRCC-2020-017) International Research Collaboration Co-Fund (IRCC) 2020, USD128,750
Lead PI, 2y, May 2020, Completed
7. Design and Development of Smart Electromagnetic Vibration Absorber (SEMVA) for Multi-Degree of freedom system (QUST-2-CENG-2020-3), QAR 7,000
Lead PI, 3m, Sept 2020, Completed
8. Semi-Active Vibration Isolator in Drilling Process using Magneto-rheological Elastomer (MRE) (QUST-1-CENG-2020-18) Qatar University Student Grants (ST-QU) -QR 20,000
Lead PI, 6m, Feb 2020, Completed
9. Hybrid Piezoelectric-Electromagnetic Nonlinear Energy Harvester (HPEEH) from fluid-induced vibrations (QUST-1-CENG-2020-19) Qatar University Student Grants (ST-QU) QR 20,000
Lead PI, 6m, Feb 2020, Completed
10. Mathematical Analysis to Estimate Optimal Shunt Impedance for Piezoelectric Transducer to Maximize Vibration Energy Dissipation in Non-Deterministic Sub-Systems (FRGS15-165-0406) Advance Research-Fundamental Research Grant Scheme,RM 250,000
Lead PI, 3y, Mar 2015, Completed
11. Parametric Investigation to Optimize Dynamic Range of Magnetorheological Damper for Prosthetic Limbs (ERGS13-020-0053) Exploratory Research Grant Scheme (ERGS), RM 137,000
Lead PI, 2y, June 2013, Completed
12. Mathematical Analysis for Estimating Power Delivered By Piezoelectric Actuators On Structures With High Modal Overlap (FRGS 11-026-0174), Selected as one of best FRGS by MOHE and to further the research under FRGS-Advanced Research Fundamental Research Grant Scheme (FRGS), RM 78,000
Lead PI, 2y, July 2011, Completed
13. A Study and Verification on The Average Power Given by Piezoelectric Materials to Non-Deterministic Subsystems (EDW B10-109-0448) IIUM- Research Endowment Fund (Type B–RM 20 ,000)
Lead PI, 2y, Jan 2011, Completed
14. Mechatronics Book Series- Selected ICOM papers (Volume 1 & 2) – KVC book Project 2011 (EDW A11-300-1091) IIUM- Research Endowment Fund (Type A–RM 5,000)
Lead PI, 6m,Sept 2011, Completed
15. Design and Fabrication of a prototype model of vibration isolation table (EDW A11-145-0936) IIUM- Research Endowment Fund (Type A– RM 5,000)
Lead PI, 6m,Sept 2011, Completed
16. Prototype model development to study Active Vibration Isolation for FSO using Electromagnetic Actuator (EDW A11-001-0792) IIUM- Research Endowment Fund (Type A– RM 5,000)
Lead PI, 6m, Feb 2011, Completed
17. A Novel Parameterized Model Reduction Method for Piezoelectric
Energy Harvesters, (FRGS/1/2018/TK04/UIAM/03/3), Fundamental Research Grant Scheme (FRGS), RM 95,500
PI, 2y, Jan 2019, Completed
18. Modeling and Experimental Investigation on Laser-micro Electro discharge machining based hybrid microfabrication process (FRGS/1/2018/TK03/UIAM/02/2) Fundamental Research Grant Scheme (FRGS), RM 98,000
PI, 2y, Jan 2019, Completed
DrAsan (July-2022)
31 / 46
19. A Novel Mathematical Formulation of Hybrid Piezoelectric and Electromagnetic Dynamics for Micro Energy Harvesting (FRGS/1/2018/TK10/UIAM/02/2) Fundamental Research Grant Scheme (FRGS), RM 74,100
PI, 2y, Jan 2019, Completed
20. Design and Control of an ionic polymer metal composite (IPMC) based artificial muscle using biosignals. Research Initiative Grant Scheme (RIGS), RM 20,000
PI, 1y, Nov 2017, Completed
21. Rotating Piezoelectric Energy Harvester of Wearable Devices (RIGS16-071-0235), Research Initiative Grant Scheme, RM 20,000
PI,1y,Nov 2016, Completed
22. Development of a prototype of Carbon Nanotube-based Angular Sensor (PRGS16-008-0039) Prototype Development Research Grant Scheme, RM83,000
PI, 2y, Sept 2016, Completed
23. Upgrading mySMARTLeg: Prototype Scale Up of a User Intention-detecting Transfemoral for Microcontrolled Prosthetic Leg Prototype Development Research Grant Scheme,RM144,000
PI, 2y, Dec 2015, Completed
24. Active Noise Control System Evaluation And Optimization For Internal Combustion Engine Downsizing (RIGS15-143-0143) Research Initiative Grant Scheme (RIGS), RM 36,000
PI, 1.5y, Dec 2015, Completed
25. Experimental Investigation of Self-sensing of Vibration Capability of MR Damper (FRGS14-124-0365) Fundamental Research Grant Scheme (FRGS), RM 80,000
PI, 2y, July 2014, Completed
26. Investigation on the Effect Of "Nano-Powder" in Micro-Wire Electro-Discharge Machining (Μ-WEDM) Process for Fabricating Micro Actuators with Nanometric Mirror Surface (FRGS14-112-0353) Fundamental Research Grant Scheme (FRGS), RM 103,400
PI, 2y, July 2014, Completed
27. Development of a 3-D μ-patterning process for vertically aligned carbon nanotubes (VACNT) for new types of sensor fabrication (SF14-008-0058) , E-Science Funds 2014, RM 111,000
PI, 2y, Mar 2014, Completed
28. Real time Anomaly Detection for Street Crime Surveillance (RACE14-008-0014), Research Acculturation Collaborative Effort 2013, RM50,000
PI, 2y, Feb 2014, Completed
29. Determination of apparent yield stress of magnetorheological fluid in annular, radial and orifice flow channel under magnetic field excitation (FRGS 2013-2) , (Collaboration with UTM-MJIIT) Fundamental Research Grant Scheme (FRGS), RM 116,000
PI, 2y, Dec 2013, Completed
30. Study of Effects of Patterning Process on Carbon Nanotube (CNT) forest surface (FRGS13-083-0324) Fundamental Research Grant Scheme (FRGS), RM 66,000
PI, 2y, Nov 2013, Completed
31. A Novel Hybrid Magnetorheological Damper for Vehicle Suspension Systems (Collaboration with UTM-MJIIT) Exploratory Research Grant Scheme (ERGS), RM 111,000
PI, 2y, June 2013, Completed
32. Development of a BCI (Brain Computer Interface) and shape memory allow based (SMA) assistive hand for Disabled people (EDW B13-035-0920) ,IIUM- Research Endowment Fund (Type B – RM 20,000)
PI, 1.5y, July 2013, Completed
DrAsan (July-2022)
32 / 46
33. Parametric modelling and intelligent control for vehicle electrical loads (VEL) using fuzzy logic control and particle swarm optimisation ( FLC-PSO), (ERGS12-033-0033) Exploratory Research Grant Scheme (ERGS), RM 50,000
PI, 2y, May 2012, Completed
34. Intelligent parametric modelling of diabetic retinopathy, (FRGS12-080-0229) Fundamental Research Grant Scheme (FRGS), RM 54,200
PI, 2y, Apr 2012, Completed
35. A Novel Mathematical Analysis of Magneto-Rheological (MR) Fluid Damper (FRGS11-024-0172) Fundamental Research Grant Scheme (FRGS), RM 68,200
PI, 2y, July 2011, Completed
36. Development of a Novel Chatter Model and Active Chatter Control Strategies for Turning Operation (FRGS 11-028-0176) Fundamental Research Grant Scheme (FRGS), RM 138,000
PI, 2y, July 2011, Completed
37. Analytical and Experimental parametric investigation for optimizing dynamic range of magnetorheological fluid dampers (EDW B11-255-0733), IIUM- Research Endowment Fund (Type B – RM 20,000)
PI, 2y, Jan 2011, Completed
38. Mechatronics Engineering Projects: Theory and Applications (KVC Projects 2011) (EDW A11-321-1112) IIUM- Research Endowment Fund (Type A – RM 5,000)
PI, 3m, Dec 2011, Completed
39. Prototype model development to study Active Vibration Isolation for FSO using Electromagnetic Actuator (EDW A11-001-0792) IIUM- Research Endowment Fund (Type A – RM 5,000)
PI, 6m, Feb 2011, Completed
40. Animal sound activity detection using support vector machines (EDW A10-158-0705), IIUM- Research Endowment Fund (Type A RM 3,000)
PI, 6m, Sept 2010, Completed
41. Active Vibration Control Using Piezoelectric Materials, (IIUM 1.11/RC/10/2-2), Short term IRPA grant (RM 10,000), 2002-2003
PI, 1y, Completed
42. Active Vibration Control with Smart Materials (IIUM 1.11/RC/10/2-2) Short term IRPA grant ( RM 13,710), June-2003
PI, 1y, Completed
43. Vibration Faults Simulation System : A System to Understand Predictive Maintenance (IIUM 1.11/RC/10/2-2) Short term IRPA grant ( RM 13,000), June-2003
PI, 1y, Completed
DrAsan (July-2022)
33 / 46
DELIVERED TALK /WORKSHOPS/SEMINARS (SINCE 2009) 1. Talk, ‘Funding and Collaboration Opportunities in Qatar’, 5th Aug 2022, International
Islamic University Malaysia
2. Talk, ‘Researh Grant & Collabration Opportunities in Qatar for Malaysian Universities, 4th Aug 2022, University Tenaga Malaysia.
3. Talk, ‘A Hybrid Nonlinear vibration energy Harvester for Remote Sensing Applications’, 17th Qatargas Engineering Forum, 15 Dec 2021, Qatar National Convention Center Doha.
4. Keynote Lecture, ‘Broadband Vibration Energy Harvesting using Piezoelectric patches’, International Conference On Electronics, Instrumentation And Devices (ICEID 2021), 24 June 2021, Technological University of Malaysia
5. Guest Speaker: ‘Vibration Energy Harvesting’, University Tun Hussein Onn Malaysia, 26 Nov 2020 (Online)
6. Guest Speaker: ‘Efficient Teaching and Learning during COVID-19’, University Tun Hussein Onn Malaysia, 12 Nov 2020 (Online)
7. Invited sharing section: ‘ABET Capstone Major Design Experiences Workshop’, College of Engineering, 28/10/2020
8. Keynote Lecture, ‘Magnetically Coupled Piezoelectric Energy Harvester to Optimize Output Voltage and Bandwidth’, International Conference on Instrumentation and Control Engineering (ICECON-2019), 19-21 Dec 2019, National Institute of Technology Tiruchirappalli (NITT), Tamil Nadu
9. Keynote Lecture, ‘Broadband Vibration Energy harvesting with potential application for small-scale robots’, 6th Arab Robotics and AI Conference 19th – 21st October 2019, Taif University, Kingdom of Saudi Arabia
10. Invited Talk on title, ‘Research Collaboration Opportunities Between Qatar-Malaysia IHL's’, RMC-IIUM, 31 July 2019
11. Invited Talk on title, ‘Undergraduate Research: Significance and benefits’, Office of Industrial Link, IIUM, 10 Nov. 2017
12. Keynote Lecture on title ‘Voltage Output and Bandwidth of Magnetically Coupled Piezoelectric Based Vibration Energy Harvester’, International Conference on Recent Innovations in Engineering and Technology (ICRIET), Hotel Crowne Plaza Madrid Airport, Spain, 23rd -24th September, 2017
13. Keynote Lecture on title ‘Piezoelectric based Broadband Vibration Energy Scavenging using Magnetic Oscillators’, 22nd International Conference on Researches in Science & Technology (ICRST), Imperial College London, UK, 13-14 Sept. 2017
14. Seminar/Lecture: ‘Vibration Energy Scavenging with Piezoelectric’, Qatar University, Doha- Qatar, 26/10/2016
15. Keynote Lecture on title ‘Energy Scavenging from Vibration with Piezoelectric’, at International Conference on Recent Advances in Technology, Engineering and Science (ICRATES’16), 27–28 July 2016, C.Abdul Hakeem College Of Engg. & Tech., Melvisharam, TN, India
16. Invited sharing section: ‘Workshop on Learners Diversity’, Kulliyyah of Engineering, IIUM, 18/8/2015.
17. Keynote Lecture on title ‘Mechatronics Engineering Curriculum & Accreditation: Malaysia As A Case Study’, at 1st International Workshop on Mechatronics Education’, 8-10 March 2015, Taif University, Taif, Saudi Arabia
DrAsan (July-2022)
34 / 46
18. Invited Speaker: ‘Workshop on Writing Successful Research Proposal for FRGS scheme’, Research Management Centre, IIUM, 26/2/2015
19. Invited Speaker: ‘Active Vibration control of flexible structure using piezoelectric Sensor-Actuator: Implementation using NI CompaqDAQ and LabVIEW’, NIDays Graphical System Design Conference, Pullman Kuala Lumpur, 30/10/2014.
20. Seminar: ‘Modelling and Control of High-frequency Vibration Using Piezoelectric Actuators’, Indian Institute of Technology Madras (IITM), Chennai, India, 3/2/2014
21. Seminar: ‘Analysis and Control of High-Frequency Vibration Using Piezoelectric Actuators’ , School of Manufacturing, UNIMAP, Perlis, 13/12/2013
22. Seminar: ‘Vibration Control of Non-Deterministic Structures Using Piezoelectric Patch Actuator’, National Institute of Technology, Trichy (NITT), India, 25/10/2013
23. Seminar: ‘Vibration analysis and control of built-up structures using piezoelectric materials’ , Postgraduate seminar, Kulliyyah of Engineering, 04/10/2013
24. Seminar: ‘Mid-High frequency vibration analysis and control of built-up structures using piezoelectric materials’ American University Sharjah, UAE, 29/09/2013
25. Invited talk: ‘Mid-high Frequency Vibration Analysis and Control’, Hokkaido University, Sapporo, Japan, 11/06/2013
26. Invited talk: 'Introduction to Kulliyyah of Engineering, International Islamic University Malaysia (IIUM)', National University of Singapore, 22/04/2013.
27. Module Instructor ‘Summer Industrial training for Students from the Fahad bin Sultan National University’ – Mechatronics Workshop, KoE- IIUM, 18th – 22nd June 2012
28. Contract Research on Matlab/Simulink and Non-propulsion electrical loads control strategy (NoPELS) for Proton Berhad – Phase 1, Kulliyyah of Engineering, 10-11 January 2012
29. Invited talk: 'Introduction to Department of Mechatronics Engineering, International Islamic University Malaysia (IIUM)', Shanghai Jiao Tong University, 25/10/2011.
30. Workshop on ‘Matlab Fundamentals’, Organized by Advanced Engineering and Innovation and centre (AEIC), 28-29March 2011
31. Workshop on ‘Matlab Fundamentals’, Organized by Advanced Engineering and Innovation and centre, 22-23 June 2010
32. Talk on title ‘From Zero to Hero’ , Organized by IIUM,
DrAsan (July-2022)
35 / 46
SERVICES SERVICE / COMMITTEE (Since 2010) No Date Activity
1. May 2022 Committee Member for ‘Life is Engineering’, MIE dept, QU 2. Since Dec 2020 Taskforce member for Multidisciplinary Senior Design Project
for CEng 3. Since Jan 2020 Coordinator- Senior Project II, MIE dept. QU 4. Since Nov 2019 Taskforce member to design and build Qatar Electric Vehicle
(QEV) for world cup 2022 5. Since Nov 2018 Committee: Postgraduate Curriculum Enhancement, Qatar Uni. 6. Since Jan 2021 Committee: MIE specialization in Railway Engineering 7. Jan – Mar 2020 Committee: MIE concentration for Materials Engineering 8. Oct – Dec 2019 Committee: MIE Minor in Oil and Gas 9. May - Oct 2020 Committee: Establish BSc Mechatronics Eng. Qatar University 10. Since Jan 2018 Search Committee of ME TA position, MIE Dept. QU
11. Jan 2018–Dec 2018 Chairman, Centre for Postgraduate Studies Trust Account committee
12. June 2014–Oct 2014
Chairman– Kulliyah of Engineering Ibadah Camp (Acad) 2014
13. Mar 2011-June 2012
Chairman, Research, and consultation committee – KoE, IIUM
14. Aug 2010–May 2011
Chairman, The 4th International Conference on Mechatronics (ICOM’11)
15. May 2018–Apr 2019
Academic Quality Assurance Committee (AQAC), IIUM
16. Jan 2018–Dec 2018 Member of the IIUM Remedial Grievance Committee (RGC) 17. Jan 2018–Jan 2020 Committee member of Academic Integrity and Honesty, IIUM 18. Apr. 2013–Dec
2016 Member Trust Account Committee of Kulliyyah of Engineering
19. Aug 2014–Dec 2016
Task force member for self-accreditation exercise, IIUM
20. June 2014-Dec 2016
Member of Management Committee of Advanced Engineering and Innovation Centre, KOE, IIUM
21. Jan 2013–Dec 2016 Member of Board of Studies: Bachelor of Engineering (Bioengineering) (Honours)
22. June 2011–Dec 2016
Member of Board of Studies : Doctor Of Engineering (Dr.Eng) And Master Of Engineering (M.Eng) – AEIC
23. June 2011–Dec 2016
Member of Board of Studies: Master of Science Degree Programme in Mechatronics Engineering
24. July 2011–Dec 2016
Member- IIUM Strategic Technologies and Engineering Centre
25. Sept 2010–Dec 2016
Member of Board of Studies: Bachelor of Engineering (Nuclear and Energy) (Honour) Programme
26. Jan 2015–Dec 2018 Member of Core team for people capability maturity model (PCMM) Project; one of KRA project under Talent Management, IIUM
DrAsan (July-2022)
36 / 46
27. Dec 2014–Dec 2016
Member-Board of Studies for Bachelor of Engineering in : 1) Biochemical-Biotechnology, 2) Electronics-Computer and Information, 3) Mechanical-Automotive, 4) Communication, 5) Materials, 6)Aerospace, 7) Mechatronics, 8) Manufacturing.
28. Feb 2013–Dec 2016
Member of the Kulliyyah’ s student disciplinary committee for academic misconduct.
29. June 2010– Dec 2018
Mechatronics Curriculum Committee : Kulliyyah of Engineering, IIUM
30. July 2012– June 2014
Member – Deans’ council IIUM.
31. June 2015–June 2015
Internal Auditor for Academic Programme Audit, IIUM
32. Jan 2015– Dec 2016
Evaluator for the research grant applications review process at Kulliyyah level.
33. Oct 2011– July 2012
Committee Member – International conference on Mathematical Applications in Engineering (ICMAE 2012 ) , IIUM
34. June 2015– Dec 2016
Steering committee member : IIUM Engineering Congress 2016 (IEC 2016)
35. Dec 2013– Dec 2014
Steering committee member: IIUM Engineering Congress2014
36. Oct 2012– Aug 2013
Steering committee – IIUM Engineering Congress 2013
37. Oct 2011– July 2012
Steering committee – IIUM Engineering Congress 2012
38. July 2012– Dec 2016
Representative for Employer for Safety and Health Committee, KOE
39. Dec 2010– June 2012
Committee Members for Safety and Health at KoE, IIUM
SERVICES AS EVALUATION PANEL / EXAMINER:
1. Evaluation Panel for ‘Performance Monitoring Workshop for the second year as a Center Excellence of Higher Education (HICoE)-Phase II- PRC’, 8 June 2021, Ministry of Education, Putrajaya Malaysia (Online)
2. Examiner for ‘Malay Language proficiency test’, Georgetown University Qatar, 1 Dec. 2020
3. Examiner for ‘Malay Language proficiency test’, Georgetown University Qatar, 4 Feb. 2020
4. Panel for ‘HiCoE First Six Month Performance Monitoring Workshop 2019’, 6- 8 Aug. 2019, Ministry of Education, Putrajaya Malaysia
5. RMC Panel for FRGS (2018-1), IIUM, 11 March – 11 Apr 2018
6. RMC Panel for FRGS (2018-1), UMP, 11 March – 11 Apr 2018
7. Panel for ‘Temporary Accreditation (desktop audit) for Foundation UTM’, University Technology Malaysia, 5 – 20 Feb. 2018
8. MQA Evaluation Panel Member for ‘Master of Mechatronic Engineering (UTEM)-MQA/PA 9765’, Nov. 2017
9. Evaluation Panel (External) for Staff promotion (Assoc Prof.) at UTHM, July 2017
DrAsan (July-2022)
37 / 46
10. Evaluation Panel for ‘Annual Performance Monitoring Workshop for 2016 as a Center Excellence of Higher Education (HICoE)’, 8 Dec. 2016, RHR Hotel Uniten Putrajaya
11. Academic Curriculum Vetter, 1 March 2016 – 31 Dec. 2017, IIUM.
12. Panel for ‘Performance Monitoring Second 6 Months as Higher education Centre of Excellence (HiCoE) 2015’ ’, 12 Jan. 2016, Ministry of Higher Education, Putrajaya.
13. Panel Judge for ‘Biomimicry Challenge 2015’, KoE-IIUM, 11 Nov. 2015
14. IPT Evaluation Panel (Science and Technology) for Prototype Research Grant Scheme (PRGS – 2015/2), UMP, 22 Aug. – 8 Sept. 2015
15. Evaluation Panel for ‘Performance Monitoring of first 6 months (in 2015) implementation as Higher Institutions Centre of Excellence (HICoE)’, 30 June 2015, PICC-Putrajaya.
16. IPT Evaluation Panel (Science and Technology) for Fundamental Research Grant Scheme Phase (FRGS – 2015/1), IIUM, June 2015 – June 2017
17. Internal Auditor for Academic Programme Audit for Kulliyyah of Architecture and Environmental Design, IIUM, 26 June 2015.
18. Evaluation Panel MQA for Provisional Accreditation for Diploma in Mechatronics Engineering (MQA/PA 6183), QUEST International University Perak (QIUP), Feb. 2015
19. Evaluation Panel (External) for Staff promotion (Assoc Prof.) at UiTM, 2014
20. Evaluation Panel (External) for Staff promotion (Assoc Prof.) at UniMAP, 2014 (for 2)
21. Evaluation Panel (External) for Staff promotion (Assoc Prof.) at UTEM, 2013
22. Evaluation Panel for application of ‘Higher Institutions Centre of Excellence (HICoE)’, 9-10 Mar. 2014, Putrajaya.
23. Panellist for Research Methodology Course 2013 for Academic Staff IIUM- 2013
24. External Evaluator for Best Final Year Projects: Mechatronics Students, Monash Uni. Sunway Campus, 30 May 2012
EXTERNAL & INTERNAL EXAMINER (M.SC / PH.D)
External
Candidate-Level-Institution Thesis title
1. Syed Muhammad Mujtaba (17006146), MSc. in Mechanical Engineering, Universiti Teknologi Petronas (UTP), Malaysia, May 2020
Real Time Fault Detection and Diagnostics System for Gas Mixture Transporting Pipelines
2. Mouaz Al Kouzbary – KGA 160015 ME.Sc. in Biomechanics, University Malaya, Nov. 2018
Robotics Assistive Angle-Foot Prosthesis Based on Sensorless Fuzzy Logic Control System
3. Ku Muhammad Faez bin Ku Ariffin- G03380 , MSc in Mechanical Engineering, Universiti Teknologi Petronas (UTP), Malaysia, June 2018
Performance Analysis of Grooved Hydrodynamic Journal Bearing with Texture and Slip Surface
DrAsan (July-2022)
38 / 46
4. Ahmed Basheer Gheni- P71254 PhD-Mechanical and Materials Engineering, National University of Malaysia (UKM), May 2018.
Vortex Induced Vibration from Disturbing fluid flow by cylinder on fluttering belt of electromagnetic harvester
5. Nur Faiqa binti Ismail-2016877184 Conversion from Masters to Phd, Universiti Teknologi Mara-UiTM, Jan 2018
Development of Uncemented Hip Stem Primary Fixation: The Effect of Bone-Implant Interface
6. Shahab Hamdani Mohammad Pure- G03106 MSc. in Mechanical Engineering, Universiti Teknologi Petronas (UTP), Malaysia, Mar 2017
Stability Analysis of Hydrodynamic Journal Bearing with an Axial Groove
7. Mohd Firdaus bin Jaafar-SM21548 Master in Mechanical Eng., Universiti Tenaga Nasional (UNITEN), Apr 2015
Improving the Performance of Piezoelectric Vibration Energy Harvester (PVEH) by Damping and Stiffness Modification
8. Rosli Hj Yusof- G01749 MSc–Mechanical Engineering, Universiti Teknologi Petronas (UTP), Malaysia, Jan 2015
Vibration Characteristics for Vapor Cavitation in Plain Journal Bearing
9. Arshed Abdulhamed Mohammed-P54892, PhD-Faculty of Engineering and Built Environment, National University of Malaysia (UKM), Sept. 2014
Design and Analysis of a PCT-based Mechanical Properties test for Refractory Metals
Internal
10. Naser Fawzi Khaled Al Zoubi (220409), May 2022
Design of Titanium Alloy Femoral Stem Cellular Structure for Stress Shielding and Stem Stability: Computational Analysis
11. Aicha Sidilemine (201203300), Apr 2022 Note: Committee Member for Comprehensive Exam
12. Yousif Babikir Ali Babikir Badri-201903174- MSc Mechanical Eng., Qatar University, Nov 2021
An Experimental and Numerical Investigation of The Combination Of Different Damper Types for Improved Control of Vibration
13. Rahib Ahmed Khan-MSc Mechanical Eng., Qatar University, Dec 2020
Crashworthiness Characteristics Of GFRP Overwrapped PVC Composite Tubes
14. Ali Esmaeili- PhD – Materials Science and Eng, May 2020
Investigation of Hybrid Effects of CNT And Nanoclay in Tailroing Mechanical and Electrical Properties Of Epoxy
15. Mohammed Jassim Al-Mahfooz MSc – Mechanical Eng., Qatar Uni, Nov 2019
Internal Pressure Capacity and Bending Behavior of the Glass Fiber Reinforced Composite Overwrapping PVC Plastic Pipes.
16. Reem M. Aljindi – MSc –Mechanical Eng., Qatar Uni, Apr 2019
Investigation of UV Stabilization and Flame Retardancy Of Polyethylene For Piping Applications
17. Sateh Abdulnaser Alabbasi – 201107021, MSc – Civil Eng., Qatar Uni., Apr 2019
A Numerical and Experimental Investigation of a Special Type Of Floating-Slab Tracks
DrAsan (July-2022)
39 / 46
18. Osama Abdeljaber – PhD– Civil Eng., Qatar Uni., Nov 2018
Real-Time Structural Damage Detection Using One-Dimensional Convolutional Neural Networks
19. Mohd Iqbal Ahmed – G1318591 M.Sc- Mechatronics Eng., IIUM, July 2016
Modelling and Control of Railway Vehicle Active Suspension Actuators
20. Muhammad Meftahul Ferdaus – G1221509, MSc–Mechatronics Engineering, IIUM, Oct. 2014
Design of Power Saving Magneto-Rheological Damper with Improved Dispersion Stability
21. Abdul Hakim Javid – G1117939 MSc–Mechanical Engineering, IIUM, July 2013
Theoretical and Experimental Analysis of Flutter – Based Wind Microgenerator
22. Alim Sabur Ajibola – G1023357 MSc–Mechatronics Engineering, IIUM, Oct 2012
Design of an Intelligent Level Crossing Control System Using Sound Recognition
23. Asrul Syaharani bin Yusof - G0614590 MSc–Mechatronics Engineering, IIUM, Apr, 2012
Vibration based health Monitoring for Automotive Engine
24. Andika Aji Wijaya - G0721893 MSc–Mechatronics Engineering, IIUM, Feb 2010
Design Of Intelligent Sliding Mode Control For Active Engine Mounting System
CONFERENCE REVIEWER / TECHNICAL COMMITTEE:
1. Int. Advisory Committee, ‘3rd International Conference on Control, Instrumentation and Mechatronics Engineering (CIM 2022)’, Universiti Teknologi Malaysia, 30-31 Mar 2022
2. Int. Advisory Committee, ‘International Conference On Electronics, Instrumentation And Devices (ICEID 2021)’, 24 June 2021, Technological University of Malaysia
3. High-Level Track Facilitator, ‘World Summit on the Information Society Forum 2021’, 22-26 Mar 2021, International Telecommunication Union (ITU), Geneva-Switzerland
4. Int. Scientific Committee, ‘International Colloquium on Computational & Experimental Mechanics (ICCEM2021)’, 29-30 July 2021, Shah Alam, Selangor, Malaysia
5. Technical Committee, ‘2020 The 9th International Conference on Engineering Mathematics and Physics’, July 1-4, 2020, Istanbul, Turkey
6. Technical Program Committee, ‘The 12th International Conference on Computational Intelligence and Communication Networks (CICN 2020)’, Sept. 25-26, 2020 in Bhimtal Nainital India.
7. Technical Program Committee, ‘2020 7th International Conference on Electrical Engineering, Computer Science and Informatics (EECSI 2020)’, Sept. 23-25, 2020 in Yogyakarta, Indonesia
8. Technical Committee and Reviewer: International Conference on Vibration, Sound and System Dynamics (ICVSSD 2019), 2 – 3 Dec. 2019, Penang, Malaysia
9. Reviewer: IEEE International Conference on Mechatronics Engineering, 30-31 Oct. 2019, Putrajaya Malaysia
10. Int. Advisory Committee: International Conference on Instrumentation and Control Engineering (ICECON 2019), 19-21 Dec. 2019, National Institute of Technology Tiruchirappalli, India
DrAsan (July-2022)
40 / 46
11. Technical Committee: 1st International Conference on Unmanned Vehicle Systems (UVS-Oman 2019), 5-7 Feb. 2019, Sultan Qaboos University, Muscat Oman.
12. Technical Committee: International Conference on Vibration, Sound and System Dynamics (ICVSSD 2018), 20th Aug 2018, Penang, Malaysia
13. Technical Committee: 6th International Conference on Noise, Vibration and Comfort (NVC), 5-7 March 2018, Putrajaya, Malaysia
14. Technical committee: The International Conference on Electrical and Electronic Engineering 2017 (IC3E2017), 14-15 Aug. 2017, Johor Bahru, Malaysia
15. Conference Editorial Board: 2016 IEEE 4th International Symposium On Robotics and Intelligent Sensors (IRIS 2016), 17-20 December 2016, Tokyo Japan
16. Technical committee: 2016 International Conference On the Application Of Science and Mathematics (SCIEMATHIC'2016) - Bali, Indonesia from November 29-30, 2016
17. Technical committee: 2016 Applied Mathematics in Science and Engineering International Conference (APPEMSE'2016), 26 – 28 January 2016 in Melaka, Malaysia.
18. Technical committee: 2016 2nd Advanced Research In Material Sciences, Manufacturing, Mechanical And Mechatronic Engineering Technology International Conference (AR4MET2016), 12 – 14 April 2016, Batam, Indonesia
19. Technical committee: 3rd International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR 2015), 1-3 December 2015, Melaka UNESCO Heritage City, Malaysia.
20. Member of Conference Editorial Board: 2015 IEEE International Symposium on Robotics and Intelligent Sensors (IEEE-IRIS2015), Oct. 18-20, 2015, Langkawi, Malaysia.
21. Technical Committee: 2015 The International Conference on Nanomaterial, Semiconductor and Composite Materials (ICNSCM2015), June 27-28, 2015, Singapore
22. Technical committee: The 10th Asian Control Conference 2015 (ASCC 2015), 31st May - 3rd June, Sutera Harbour Resort, Sabah, Malaysia
23. Technical committee: World Symposium on Mechatronics Engineering & Applied Physics (WSMEAP’ 2015), 11-13 June 2015, Sousse, Tunisia. Technically co-sponsored by IEEE Tunisia Section.
24. Technical committee: 2015 Advanced Research In Material Sciences, Manufacturing, Mechanical And Mechatronic Engineering Technology International Conference (AR4MET2015), 2 – 4 June 2014 at Bali, Indonesia
25. Technical committee: 2015 International Conference on Solar Energy & Building ICSoEB' 2015, January 20-21, Sousse, Tunisia
26. Technical Chair : 2014 IEEE International Symposium on Robotics, Manufacturing and automation (ROMA2014), Kuala Lumpur, 15-16 Dec. 2014
27. Panellist for Research Methodology Course 2014 for Academic Staff IIUM- 2014
28. Technical Committee: International Conference on Applied Science, Management and Technology 2014 (ICASMT 2014), Dubai, UAE, 4th & 5th December 2014.
29. International Programme Committee: 2014 4th International Conference on Advanced Materials and Engineering Materials (ICAMEM-2014), Ningbo, China 16 – 17 Oct. 2014 & Hong Kong 19-20 Oct. 2014
30. Technical committee: Asian Control Conference 2015 (ASCC 2015), 31 May – 3 June 2015
31. Technical committee: ICCAAM' 2014 (2014 International Conference on Control Automation & Applied Mechanics), 25-26 Nov. 2014 Algiers, Algeria (IEEE technical co-sponsored by IEEE Algeria).
DrAsan (July-2022)
41 / 46
32. Technical Committee: The Second International Conference on Modern Trends in Science, Engineering and Technology 2014 (ICMTSET 2014), Dubai, UAE, 10th& 11th September 2014.
33. Technical Committee: International Conference on Innovative Trends in Science, Engineering and Management 2014 (ICITSEM 2014), Dubai UAE, 12th & 13th February 2014.
34. International Programme Committee member: 2013 3rd International Conference on Advanced Materials and Engineering Materials, Singapore, 14-15 Dec. 2013
35. Technical Committee in Mechatronics Track: 2013 International Conference on Computing, Electrical and Electronics Engineering (ICCEEE2013)-IEEE, Khartoum, Sudan , 26-28 Aug. 2013
36. Technical committee: International symposium on Mechanical Science and Technology (ISMST)- 2011
37. First International Conference on Intelligent Robotics, Automation and Manufacturing (IRAM2012)-2012
DrAsan (July-2022)
42 / 46
INTERNATIONAL JOURNAL REVIEWER (since 2010): No Journal Title 2010-
2015 2016 2017 2018 2019 2020-
2021 2022
1. Journal of Sound and Vibration [WoS] 1 1 2. Journal of Vibration and Control [WoS] 1 3 1 2 3. Mechanical Systems and Signal
Processing [WoS] 3 4 3 1 1
4. Measurement-Journal of the International Measurement Confederation [WoS]
1
5. Shock and Vibration [WoS] 1 1 6. IEEE Transactions on Mechatronics
[WoS] 1 1
7. Smart Structures and Systems [WoS] 1 8. International Journal of Mechanical
Sciences [WoS] 1
9. Composite Structures [WoS] 1 10. Journal of Low Frequency Noise,
Vibration and Active Control [WoS] 2 1 3 1 1
11. KSCE Journal of Civil Engineering [WoS] 1 12. International Journal of Mechanics and
Materials in Design [WoS] 1 1
13. Energy Technology [WoS] 1 14. Microsystem Technologies [WoS] 1 1 15. Journal of Renewable and Sustainable
Energy [WoS] 1 2
16. Journal of the Brazilian Society of Mechanical Sciences and Engineering [WoS]
1
17. Measurement and Control [WoS]
1 1 18. Journal of Vibration Engineering &
Technologies [WoS] 1 1
19. International Journal of Acoustics and Vibration (IJAV) [WoS]
4
20. Journal of Magnetics [WoS] 1 21. Journal of Engineering Science and
Technology (JESTEC) [Scopus] 1
22. IIUM Engineering Journal (IIUMEJ) [ESCI]
1
23. Journal of Neural Network World [Scopus]
1
24. Journal of Engineering Science & Technology [Scopus]
1
25. International Journal of Robotics and Mechatronics [Scopus]
1
26. International Journal of Manufacturing Technology and Management [Scopus]
1
27. Recent Patents on Mechanical Engineering [Scopus]
1
28. International Journal of Computer Applications in Technology [Scopus]
1
29. International Journal of Advanced Design and Manufacturing Technology [Scopus]
1
30. Procedia Engineering, Elsevier [Scopus] 1 Total 20 14 8 10 5 8
DrAsan (July-2022)
43 / 46
FACULTY DEVELOPMENT ATTENDED TRAINING/WORKSHOPS/SEMINARS (SINCE 2009) 1. ‘Briefing and training on the MyQUEST 2022 rating system, Instruments and Site
visit for facilitators/panel’, Ministry of Higher Education Malaysia, Putrajaya, 28-July-2022
2. IEEE SNCMJC Virtual Technical Talk on ‘Triboelectric Nanogenerators for Biology, Medicine, and Electronics’, by Prof. Dr. Ken-Tye Yong-University of Sydney, 7 June.2022
3. Talk on ‘Towards Impactful SDG-Related Research in VUCA World’, by Prof. Datuk Dr. Asma Ismail, 15 Apr. 2022, Malaysia
4. Attended and Presented paper at ‘17th Qatargas Engineering Forum’, 15 Dec 2021, Qatar National Convention Center Doha.
5. ‘The Humanising of Education Through Responsible Research and Innovation Online Platform’ Murabbi Talk Series with Prof. Datuk Dr. Asma Ismail, 5 July 2021, IIUM Malaysia
6. Attended and delivered Keynote at ‘International Conference on Electronics, Instrumentation and Devices (ICEID 2021)’ 24 June 2021, UTM- Malaysia
7. ‘Project-based Learning (PBL) in Engineering Education Seminar’, 30 Sept 2020, Qatar University
8. IIUM Alumni Webinar: Transformation in Education for Global Leadership, 9 Sept 2020
9. ‘COMSOL Multiphysics Online Intensive Training Course’, 20-31 July 2020
10. ‘Engineering and Engineering Technology Accreditation Council Standards’ 2020’, Webinar on 16 & 17 June 2020.
11. AKEPT Talk: Dialogue on Values-based Education (DOVE) Series 2, ‘Higher Education Post Covid-19: Synergies Among Science, Technology, and Humanities’, 15 June 2020 (webinar)
12. AKEPT Talk: Dialogue on Values-based Education (DOVE) Series 1, ‘Mainstreaming Values-Based Education in Universities: Leadership and Management Perspectives’, 10 June 2020 (webinar)
13. Elsevier Day: ‘Unlocking Qatar University’s Research Potential’ Library Building B 13, Qatar University, 29 Jan 2020
14. Seminar on ‘Information Sessions for the 13th Cycle of NPRP-Standard’, Qatar National Research Fund (QNRF), Auditorium H10 Qatar University, 20 Jan 2020
15. A 2-Day Intense Course on ‘Critical Thinking for Excellent Decision Making’, By Institute of Professional Advancement (sponsored by AKEPT), Hotel Istana KL, 18-19 July 2018
16. Engineering Technology Accreditation Council (ETAC) Panel Training - Conversion Accreditation Dept., BEM, Kelana Parkview Tower, 28 June 2018
17. Workshop on ‘Preparation of Working Paper for the Establishment of a Comprehensive University of the Public University of Malaysia’, Ministry of Education Malaysia, Everly Hotel Putrajaya, 28 – 29 April 2018
18. Workshop on ‘Academic leadership in Higher Education Institution Module: AL 402 – Malaysian Higher Education Policies and Reforms’, AKEPT, Bandar Enstek, NS, 4-5 April 2018
DrAsan (July-2022)
44 / 46
19. Workshop on ‘PERMATA STEM Mentoring’, Pusat PERMATApintar Negara, National University Malaysia (UKM), 10-11 Mar. 2018
20. ASEAN 2050 Forum: Fourth Industrial Revolution, Putrajaya Marriot Hotel, Putrajaya, 2 & 3 Nov. 2017
21. Seminar on Industrial Revolution 4.0, Royale Chulan Hotel, KL, 24-25 Aug. 2017
22. Workshop on ‘Financial Management Training 2017 (FMTP 2017)’, Senate Hall, IIUM, 25-26 April 2017
23. Workshop on ‘The Establishment of National STEM Centre & Action Plan Development’ , Academy of Sciences Malaysia, Ministry of Science Technology & Innovation, Kuala Lumpur, 20 – 22 Feb. 2017
24. Workshop on ‘Human Capital Development for Technology Transfer Centres’, AKEPT, Bandar Enstek, NS, 15-17 Feb. 2017
25. Workshop on ‘Academic Governance and Leadership: AL 301 – Academic Leadership Programme’, AKEPT, Bandar Enstek, NS, 21 – 22 Nov. 2016
26. 2-Day Workshop on Revision of Criteria for Promotion of Academic Staff. , Senate Hall, IIUM, 11-12 Oct. Sept. 2016
27. Workshop on ‘Curriculum Refinement for Faculty of Engineering Technology’, Tun Hussein Onn Malaysia University, Batu Pahat, Johor, 20-21 Aug. 2016
28. Clinic on ‘Integrated Cumulative Grade Point Average (iCGPA), Ministry of Higher Education, Presint 5, Putrajaya, 12 Aug. 2016.
29. ‘ICTSP Environmental Scanning Team Workshop’, Multipurpose Hall, Residential and Services Department (RSD), 4 Aug. 2016.
30. Workshop on ‘Higher Education Academic Leadership Module: AL 401 – Ideas and Roles of Higher Education in Malaysian for the 21st Century’, AKEPT-Ministry of Education, NS, 1 – 2 Aug. 2016
31. Workshop on “EAC Work’, by Engineering Accreditation Council Malaysia, at Senate Hall, IIUM, 21 – 22 Jan. 2016.
32. Workshop on ‘EAC New Panel Evaluators’, by Engineering Accreditation Council Malaysia, at Hotel Grant Dorsett Subang, 14 – 16 Dec. 2015.
33. Premier Ibadah Camp (PIC) For Iium Leaders 2015, SHAS Mosque & senate Hall, IIUM Gombak, 27 – 29 Nov. 2015
34. Workshop on ‘IIUM Admission Requirements’, Ibnu Tamiyyah Conference Room, KENMS, IIUM, 19th Nov. 2015
35. Workshop on ‘Realising Transformational Leadership –Enhancing Change Stewardship (Phase 4)’, AKEPT, Bandar Enstek, NS, 16 – 17 Nov. 2015
36. Workshop on ‘the Art of Deaning’, Senate Hall, IIUM, 8th Oct. 2015
37. Half day workshop on ‘Self accreditation audit’, Senate Hall, IIUM, 4th Sept. 2015
38. Workshop on ‘IIUM Policies & Guidelines on Islamisation’
Banquet Hall, Rectory Building, IIUM, 20th Aug. 2015
39. Seminar on ‘Sustainability of Integrity in the Public Service: Issues and Challenges’ Malaysian Institute of Integrity, 16 June 2015
40. Workshop on ‘People Capability Maturity Model’, Senate Hall, IIUM, 8- 9June 2015
41. Workshop on ‘Realising Transformational Leadership-Accelerating Transformation (Phase 2)’, AKEPT, Bandar Enstek, NS, 25 – 27 May 2015
DrAsan (July-2022)
45 / 46
42. Training on ‘Safety and Health Committee Trg Programme’, IIUM, 22 April 2015
43. 2-Day Workshop on IIUM Strategic Planning 2013-2020
Dewan Zabedah, Azman Hashim Complex & Banquet Hall, IIUM, 11-12 Feb. 2015
44. Workshop on ‘Enhancement of the online APAR’, Banquet Hall, IIUM, 20 Jan. 2015
45. Workshop on ‘Closing of 2014 Key Result Area (KRA) Projects and Sign-off of 2015 KRA projects’, Senate Hall, IIUM, 24 Dec. 2014
46. Workshop on ‘O’ Level entry requirements for Admission into CFS-IIUM
De Palma Hotel, Shah Alam, 2 December 2014
47. 3rd Engineering Education Summit, Marriott Hotel Putrajaya, 26 Nov. 2014
48. Workshop on ‘Enhancement of the Online APAR’, Resort World Genting Awana, Pahang, 31st Oct – 2nd Nov 2014
49. A half-day workshop to ‘Prepare Self-Accreditation Documents: Part 1’, Banquet Hall, Rectory Building, IIUM, 23rd July 2014
50. Workshop on ‘Lean Management 2014’, Banquet Hall, Rectory Building, IIUM, 26 – 27 June 2014
51. 2nd Premier Ibadah Camp 2014 for IIUM leaders, Resort World Genting Awana, Pahang, 26 – 28 May 2013
52. ‘Outcome-Based Education Workshop’, Centre for Professional Development, IIUM, 7-8 May 2014
53. Workshop on ‘Data Evaluation (Thrust Areas) Application for Higher Education Center of Excellence (HICoE) 2013’, By Department of Higher Education, Ministry of Higher Education Malaysia, at Hotel Everly Putrajaya, 28 April 2014.
54. ‘Assessor Training for Programme Accreditation: Quality Assurance Workshop - Code of Practice Training for Program Accreditation (COPPA) and Learning Outcomes’, By Malaysian Qualifications Agency (MQA), at PKNS PJ, 10 – 12 April 2014
55. Workshop ‘The MyRA Instrument for Assessment of The Research Performance of Malaysian Universities’, Senate Hall, Rectory Building, IIUM, 25 Feb.2014
56. Roundtable Dialogue on ‘Promoting Science, technology, Engineering & Mathematics (STEM)’, Sultan Idris University of Education, Tanjung Malim, 12 Nov. 2013
57. NI Graphical System Design Summit 2013, One World Hotel, Petaling Jaya, 3 Oct. 2013
58. ‘Round Table Meeting’ with MQA and professional bodies., By MQA, at Hilton Hotel Petaling Jaya, 5 Sept. 2013
59. 3-day Intensive Course on Lead Evaluator for Accreditation, By MySET & MJIIT-UTM, at Marriott Hotel Putrajaya, 22-24 June 2013
60. One-Day Workshop on EAC assessment, By MySET & MJIIT-UTM, at Marriott Hotel Putrajaya, 26 May 2013
61. Workshop Committee on Academic Misconduct, Resort World Genting Awana, Pahang, 25 – 26 March 2013
62. Workshop on AEIC strategic Planning (2013-2020), Resort World Genting Awana, Pahang, 22 – 24 Feb 2013
63. Premier Ibadah Camp (NO.1) for IIUM leaders, KWSP Institute, Bangi, Selangor, 1 – 3 Feb 2013
DrAsan (July-2022)
46 / 46
REFERENCES
Qatar
Prof. Elsadig Mahdi Ahmed Saad Head of MIE Department, Qatar University Email: elsadigms@qu.edu.qa
Dr.Ahmad Abdulla O M Al-Own Dean of Graduate Studies Qatar University Email: ahmad.alown@qu.edu.qa
Malaysia Prof. Emeritus Dato’ Wira Ir.Dr.Md Noor Salleh Former Dean, Kulliyyah of Engineering, IIUM, Jalan Gombak. 53100, Selangor email: mdnoor@iium.edu.my
United Kingdom Prof. Dr. Robin S. Langley Head-Mechanics, Materials & Design Division Department of Engineering, Cambridge University email: rsl21@eng.cam.ac.uk
64. Workshop on Review of CFS Curriculum Structure, Banquet Hall, Rectory Building, IIUM, 9th Jan 2013
65. Workshop on Commitment Book of Quality Teaching and Learning, Kelab Darul Ehsan, Ampang, 8th Jan 2013, by IIUM
66. Managerial Skills workshop for Academic Administrator, Dewan Zabedah, Tan Sri Azman Hashim Complex, 27-30 Nov 2012
67. ‘Tunas Academic Leadership Development Program 2011’, AKEPT, Nilai, 21-23 Dec. 2011
68. ‘Discussion of Mechatronic Engineering Programme Guidelines’, Faculty of Engineering, National University Malaysia, 6th Oct 2011
69. Workshop on ‘Value management system for Pagoh Hub KPT’, Ministry of Education, Hotel Marriott Putrajaya, 19-23 Sept. 2011
70. Workshop on ‘Learning Outcomes, Kemahiran Insaniah & student learning time (LOKI & SLT), Experimental Hall, Admin Building, IIUM, 6th April 2011
71. Workshop for Academic Staff on Outcome-Based Education (OBE)’, Kulliyyah of Engineering, IIUM, 27th July 2011
72. BioMED2011 Conference Tutorials, University Malaya, 20th June 2011
73. Workshop on ‘Curriculum Design and Assessment’, Conference Room, CAC, IIUM, 9th June 2010
74. Development Effective Learning Outcomes, University Pertanian Malaysia (UPM), 4 May 2011
75. Workshop on Strategic planning–AEIC, Equatorial Hotel, Cameron Highland, Pahang, 21-23 Jan 2011
76. Workshop on FRGS : Rectory building, 1-Dec-2010
77. A review of IIUM strategic plan : Banquet Hall IIUM, 18 & 24 Aug. 2010
78. Competency Level Assessment (CLA) Programme – Level 5
Institute of Education, IIUM, 19th – 22nd April 2010