This article was downloaded by:[Instituto de Quimica]On: 7 October 2007Access Details: [subscription number 776572327]Publisher: Taylor & FrancisInforma Ltd Registered in England and Wales Registered Number: 1072954Registered office: Mortimer House, 37-41 Mortimer Street, London W1T 3JH, UK
Synthetic CommunicationsAn International Journal for RapidCommunication of Synthetic Organic ChemistryPublication details, including instructions for authors and subscription information:http://www.informaworld.com/smpp/title~content=t713597304
Opening of Epoxide Rings Catalyzed by NiobiumPentachlorideMauricio Gomes Constantino a; Valdemar Lacerda Júnior b; Paulo RobertoInvernize a; Luiz Carlos da Silva Filho a; Gil Valdo José da Silva aa Faculty of Philosophy, Department of Chemistry, Sciences and Letters of RibeirãoPreto, University of São Paulo, Brazilb Department of Chemistry, Center of Exact Sciences, Federal University of EspíritoSanto, Vitória, Brazil
Online Publication Date: 01 January 2007To cite this Article: Constantino, Mauricio Gomes, Júnior, Valdemar Lacerda, Invernize, Paulo Roberto, Filho, LuizCarlos da Silva and da Silva, Gil Valdo José (2007) 'Opening of Epoxide Rings Catalyzed by Niobium Pentachloride',Synthetic Communications, 37:20, 3529 - 3539To link to this article: DOI: 10.1080/00397910701555790URL: http://dx.doi.org/10.1080/00397910701555790
PLEASE SCROLL DOWN FOR ARTICLE
Full terms and conditions of use: http://www.informaworld.com/terms-and-conditions-of-access.pdf
This article maybe used for research, teaching and private study purposes. Any substantial or systematic reproduction,re-distribution, re-selling, loan or sub-licensing, systematic supply or distribution in any form to anyone is expresslyforbidden.
The publisher does not give any warranty express or implied or make any representation that the contents will becomplete or accurate or up to date. The accuracy of any instructions, formulae and drug doses should beindependently verified with primary sources. The publisher shall not be liable for any loss, actions, claims, proceedings,demand or costs or damages whatsoever or howsoever caused arising directly or indirectly in connection with orarising out of the use of this material.
Dow
nloa
ded
By:
[Ins
titut
o de
Qui
mic
a] A
t: 18
:25
7 O
ctob
er 2
007
Opening of Epoxide Rings Catalyzedby Niobium Pentachloride
Mauricio Gomes Constantino
Faculty of Philosophy, Department of Chemistry, Sciences and Letters of
Ribeirao Preto, University of Sao Paulo, Brazil
Valdemar Lacerda Junior
Department of Chemistry, Center of Exact Sciences, Federal University
of Espırito Santo, Vitoria, Brazil
Paulo Roberto Invernize, Luiz Carlos da Silva Filho, and
Gil Valdo Jose da SilvaFaculty of Philosophy, Department of Chemistry, Sciences and Letters of
Ribeirao Preto, University of Sao Paulo, Brazil
Abstract: The behavior of several epoxides when treated with NbCl5 was studied. In
general, the studied epoxides reacted rapidly with NbCl5, giving, in most cases, more
than one product (chlorohydrins, products containing solvent residues, as well as
rearrangement products). A detailed study was performed to verify the effects of the
temperature (rt, 08C, or 2788C) and of the NbCl5 molar concentration on the compo-
sition of the products, yield, and time required for the reactions.
Keywords: epoxides, Lewis acid, niobium pentachloride
The epoxide ring is one of the most versatile functional groups in organic
chemistry. The polarity and strain of the three-membered ring allow many
reactions with a large number of reagents such as electrophiles, nucleophiles,
Received in the USA October 16, 2006
Address correspondence to Mauricio Gomes Constantino, Faculty of Philosophy,
Department of Chemistry, Sciences and Letters of Ribeirao Preto, University of
Sao Paulo, Av. Bandeirantes 3900, 14040-901 Ribeirao Preto-SP, Brazil. E-mail:
Synthetic Communicationsw, 37: 3529–3539, 2007
Copyright # Taylor & Francis Group, LLC
ISSN 0039-7911 print/1532-2432 online
DOI: 10.1080/00397910701555790
3529
Dow
nloa
ded
By:
[Ins
titut
o de
Qui
mic
a] A
t: 18
:25
7 O
ctob
er 2
007
acids, bases, and radicals. The opening of epoxide rings has been a required trans-
formation in studies on the synthesis of natural products.[1,2] Boron trifluoride
etherate is the most commonly used Lewis acid for this purpose, but we have
already demonstrated[3–7] that the stronger Lewis acid NbCl5 can give similar
results under milder conditions. Moreover, in certain cases, different products
such as chlorohydrins are obtained with NbCl5. We decided to extend our inves-
tigations to a number of epoxides in an effort to establish the scope of the reaction.
In this article, we describe the behavior of epoxides 1–6 (Fig. 1) when
treated with NbCl5, performing a detailed study to verify the effects of the
temperature (rt, 08C, or 2788C) and of the NbCl5 molar ratio on the compo-
sition of the products, yield, and time required for the reactions.
Epoxides 1–6 were prepared by treatment of the respective olefins with
H2O2 in basic medium (epoxides 1, 4, and 6) or with 70% meta-chloroperoxy-
benzoic acid (MCPBA) (epoxides 2, 3, and 5). The results of these prep-
arations are shown in Table 1.
Reactions of epoxides 1–6 with NbCl5 were performed under a nitrogen
atmosphere, at three different temperatures (room temperature, 08C, and
2788C), using anhydrous ethyl acetate as solvent, and with different molar
Figure 1. Epoxides chosen for treatment with NbCl5.
Table 1. Preparation of epoxides 1–6
Starting olefin Conditions (temp, time) Yield (%) Epoxide
Isophorone 208C, 180 min 70 1
Cyclohexene rt, 90 min 65 2
(+)-a-Pinene 58C, 60 min 85 3
L-(2)-Verbenone 208C, 15 min 73 4
(2)-b-Pinene 58C, 90 min 65 5
L-(2)-Carvone 208C, 15 min 80 6
M. G. Constantino et al.3530
Dow
nloa
ded
By:
[Ins
titut
o de
Qui
mic
a] A
t: 18
:25
7 O
ctob
er 2
007
ratios of NbCl5 (0.5 or 0.125 eq.). The results obtained in these studies are
summarized in Table 2.
All products were isolated and characterized by spectroscopic and spec-
trometric methods (1H NMR, 13C NMR, IR, and mass spectra). Relative
stereochemistry determination for most epoxides and products was accom-
plished through nuclear overhauser effect difference (NOEDIF) experiments
and comparison with literature data.[8]
As can be observed from Table 2, the reactions of epoxides with NbCl5 in
most cases are very fast (1 min), following different paths and mechanisms
depending on the structure of the epoxide and on the reaction medium, and
give in most cases more than one product: chlorohydrins, products containing
solvent residues, and rearrangement products.
Epoxides 1 and 3–6 have a fully substituted carbon in the epoxide ring that
could facilitate carbocation formation. The products obtained from these
epoxides clearly show that the epoxide bond to the more substituted carbon
atom was preferentially broken. Thus, the tertiary carbocation formed can
follow different paths: rearrangements, acyl group migration, additions of
Cl2 and solvent residues, and Hþ elimination. As an example, we have
chosen the ring opening of a-pinene epoxide (3) to illustrate these transform-
ations. In Scheme 1; a proposed mechanism for this reaction is shown.
The opening of the epoxide ring gives the tertiary carbocation; the tension
of the nearby four-membered ring is then relieved by either of the two familiar
pathways: migration of the isopropyl group or ring opening. Nucleophilic
addition of Cl2 can now occur to each of the carbocations 3a or 3b, thus
forming the chlorohydrins 14 (1.5%) and 12 (20%). The defined stereo-
chemistry of 14 suggests that the nucleophile could be one of the chlorine
atoms of the Lewis acid residue still attached to the oxygen. Compound 3bcan also lose Hþ to give 13 (18%), and 3a gives, as a major product, the
rearranged aldehyde 11. The general pattern of these rearrangements is
similar to those obtained with other Lewis acids.[9 – 12]
Epoxides that cannot give stable tertiary carbocations, such as 2 or 6, react
in a different way. The products obtained here suggest that the epoxide ring
opening should be assisted by a nucleophilic attack by Cl2 to form chlorohy-
drins 9 or 20, or by the solvent to give acetates 10 or 19.
The effect of the temperature and the NbCl5 molar ratio on these reactions
was evaluated: the results, summarized in Table 2, clearly show that NbCl5can be used in reactions at low temperatures (08C or 2788C), leading in
most cases to a higher selectivity and better yields.
A remarkable aspect of this work is the higher efficiency of NbCl5, as
compared to other Lewis acid catalysts (e.g., when epoxide 3 reacts with
BF3. Et2O, seven different products are obtained).[12] The possibility of
effecting the ring opening of epoxides at low temperatures and with short
reaction times is, in our opinion, the most important aspect shown in this research.
In conclusion, the scope and limitations of the NbCl5-mediated opening
of epoxide rings have been studied. The methodology allows us to obtain
Epoxide Ring Opening 3531
Dow
nloa
ded
By:
[Ins
titut
o de
Qui
mic
a] A
t: 18
:25
7 O
ctob
er 2
007
Table 2. Opening of epoxides 1–6 catalyzed by NbCl5
Epoxides Products NbCl5 (eq.) Temp. (8C) Time (min) Yield (%)a Ratio (%)b
1 0.5 rt 1 81 80:20
0 1 70 86:14
278 20 86 95:6
0.125 rt 5 70 90:10
0 10 73 94:6
278 480c 77 97:3
2 0.5 rt 1 62 77:23
0 1 65 85:15
278 1 77 87:13
0.125 rt 1 69 85:15
0 1 70 90:10
278 1 75 91:9
3 0.5 rt 1 — Complex
mixture
0 1 — Complex
mixture
278 1 69 43:43:5:9
0.125 0 1 67 39:30:26:5
278 1 75 47:27:24:2
M.G.Consta
ntin
oet
al.
3532
Dow
nloa
ded
By:
[Ins
titut
o de
Qui
mic
a] A
t: 18
:25
7 O
ctob
er 2
007
4 0.5 rt 1 — Complex
mixture
278 60 69 —
0.125 rt 200 65 —
278 480c 71 —
5 0.5 rt 1 65 41:42:17
0 1 69 31:49:20
278 1 73 25:52:23
0.125 rt 1 67 25:56:19
0 1 70 21:65:14
278 1 75 12:75:13
6 0.5 rt 10 78 38:62
0 30 81 30:70
278 480c — —
0.125 rt 30 69 25:75
0 240 86 11:89
aBased on the major product. In cases where the starting material was partially recovered, the yield was calculated based on the unrecovered
starting material.bRatios determined by 1H NMR.cAfter this time, the reaction was quenched because the conversion of starting materials into products was already too slow or did not proceed at all.
EpoxideRingOpening
3533
Dow
nloa
ded
By:
[Ins
titut
o de
Qui
mic
a] A
t: 18
:25
7 O
ctob
er 2
007
chlorohydrins, products containing solvent residues, and rearrangement
products. These results confirm the effectiveness of NbCl5 as a Lewis acid
in these reactions and make the procedure a promising tool because of the sim-
plicity and mildness of this methodology.
EXPERIMENTAL
General Methods and Materials
All reactions were carried out under an atmosphere of N2 unless otherwise
specified. Ethyl acetate was distilled from calcium hydride. All commercially
available reagents were used without further purification. Thin-layer chromato-
graphy (TLC) was performed on 0.2-mm Merck 60F254 silica-gel aluminum
sheets, which were visualized with a vanillin/methanol/water/sulfuric acid
mixture. ACROS 80-230 silica gel 60 was employed for column chromato-
graphy. A Perkin-Elmer RX IFTIR system was used to record IR spectra
(neat or film). Bruker DRX 400 and DRX 500 spectrometers were employed
for the NMR spectra (CDCl3 solutions) using tetramethylsilane as internal
Scheme 1. Proposed mechanism for opening of a-pinene epoxide (3) with NbCl5.
M. G. Constantino et al.3534
Dow
nloa
ded
By:
[Ins
titut
o de
Qui
mic
a] A
t: 18
:25
7 O
ctob
er 2
007
reference for 1H and CDCl3 as an internal reference for 13C. Mass spectra were
obtained on a HP GC/MS system 5988–A.
General Procedure for Preparation of Epoxides 1, 4, and 6
To a solution containing (+)-isophorone (0.94 g, 6.8 mmol) or L-(2)-
verbenone (1.02 g, 6.8 mmol) or L-(2)-carvone (1.02 g, 6.8 mmol) and 30%
aqueous solution of hydrogen peroxide (2.0 mL, 0.67 g, 21 mmol) in
methanol (8 mL), a 6M aqueous solution of sodium hydroxide (0.60 mL,
0.13 g, 3.3 mmol) was added drop by drop, maintaining the reaction mixture
at 15–208C with a water bath. After the reaction was complete, the mixture
was diluted with water (8 mL) and extracted with ethyl ether (2 � 10 mL).
The solvent was removed under vacuum, and the products were purified by
column chromatography through silica gel using a mixture of hexane and
ethyl acetate (8:2) as eluent, yielding a colorless oil of the epoxide.
General Procedure for Preparation of Epoxides 2, 3, and 5
To a solution of MCPBA 70% (3.57 g, 14.5 mmol) and sodium bicarbonate
(1.56 g, 18.6 mmol) in methylene chloride (36.0 mL), a solution of cyclohexene
(1.17 g, 14.2 mmol) or (+)-a-pinene (1.93 g, 14.2 mmol) or (2)-b-pinene
(1.93 g, 14.2 mmol) in methylene chloride (3 mL) was added drop by drop,
maintaining the reaction mixture at 5–108C with a water bath. During the
addition, sodium m-chlorobenzoate began to crystallize, indicating that the
reaction was proceeding. After completion of the addition, stirring was
continued at the same temperature. After the reaction was complete, the
mixture was treated with 10% aqueous sodium sulfite solution (10.0 mL) and
stirred for 30 min at room temperature to remove the excess of peracid.
Water (7.0 mL) was added, and the methylene chloride phase was separated
and washed with 16.0 mL of 5% aqueous sodium carbonate. The two
aqueous washings were extracted with 10.0 mL of methylene chloride, and
the organic solutions were combined and dried over anhydrous magnesium
sulfate. Evaporation of the solvent under vacuum gave an oily residue that
was purified by column chromatography through silica gel using a mixture of
hexane and ethyl acetate (8:2) as eluent, yielding a colorless oil of the epoxide.
General Procedure for the Reactions of Epoxides 1–6 with NbCl5
To a solution of niobium pentachloride (0.135 g, 0.500 mmol or 0.033 g,
0.125 mmol) in anhydrous ethyl acetate (1 mL) (maintained at room tempera-
ture, 0, or 2788C and under nitrogen atmosphere), a solution of the epoxides 1
(0.154 g, 1.00 mmol) or 2 (0.981 g, 1.00 mmol) or 3 (0.152 g, 1.00 mmol) or 4
Epoxide Ring Opening 3535
Dow
nloa
ded
By:
[Ins
titut
o de
Qui
mic
a] A
t: 18
:25
7 O
ctob
er 2
007
(0.166 g, 1.00 mmol) or 5 (0.152 g, 1.00 mmol) or 6 (0.166 g, 1.00 mmol) in
anhydrous ethyl acetate (1 mL) was added. The reaction mixture was
quenched with a 10% aqueous citric acid solution (2.0 mL, when working
at room temperature and 08C) or with a 1:1 solution of water/THF (2.0 mL,
when working at 2788C). The mixture was diluted with water (5 mL) and
ethyl acetate (10 mL). The organic layer was separated, washed with 5%
aqueous sodium bicarbonate (3 � 10 mL) and saturated brine (2 � 10 mL),
and dried over anhydrous magnesium sulfate. The solvent was removed
under vacuum, and the products were purified by column chromatography
through silica gel using a mixture of hexane and ethyl acetate (8:2) as
eluent to give the products as pale yellow oils.
All compounds gave satisfactory spectroscopic data. Data for epoxides 1
and 2 and for compounds 7–10 are in accordance with those related in a
previous work.[3] Data for epoxides 3–6 are consistent with those related
in the literature.[8a – c] Data for compounds 11–20 are given next; for
compounds 11, 13, 16, 18, and 20, data were compared with literature.
Data
Compound (11): (+)-2,2,3-Trimethyl-cyclopent-3-ene-1-acetaldehyde[8a,d]
1H NMR (400 MHz, CDCl3): d 9.80 (t, 1H, J ¼ 2.5 Hz); 5.24 (ddq, 1H,
J1 ¼ 2.5, J2 ¼ 2.0, and J3 ¼ 1.8 Hz); 2.53 (ddd, 1H, J1 ¼ 15.5, J2 ¼ 4.0,
and J3 ¼ 2.5 Hz); 2.40 (m, 2H); 2.31 (m, 1H); 1.89 (dtd, 1H, J1 ¼ 4.0;
J2 ¼ 2.5, and J3¼ 1.8 Hz); 1.62 (m, 3H); 1.00 (s, 3H); 0.79 (s, 3H). 13C
NMR (100 MHz, CDCl3): d 203.1 (CHO); 148.0 (C); 121.6 (CH); 46.9 (C);
45.1 (CH2); 44.2 (CH); 35.5 (CH2); 25.6 (CH3); 20.0 (CH2); 12.6 (CH3). IR
(film) nmax: 2963; 2920; 1726; 1633; 1446; 1366; 1120; 1073 cm21. MS
m/z (rel. intensity) (%): 152 (M)þ (2); 137 (3); 119 (5); 108 (100); 105
(10); 93 (62); 67 (27); 41 (20).
Compound (12): (+)-trans-5-(1-Chloro-1-mehyl-ethyl)-2-mehyl-2-cyclo-
hexen-1-ol. 1H NMR (400 MHz, CDCl3): d 5.56 (dquint, 1H, J1 ¼ 4.5 and
J2 ¼ 1.5 Hz); 4.06 (t, 1H, J ¼ 3.5 Hz); 2.23 (dddd, 1H, J1 ¼ 14.2, J2 ¼ 7.0,
J3 ¼ 3.5, and J4¼ 1.5 Hz); 2.10 (ddt, 1H, J1 ¼ 13.4, J2¼ 4.5, and
J3 ¼ 1.5 Hz); 1.90 (m, 3H); 1.79 (s, 3H); 1.60 (s, 3H); 1.56 (s, 3H). 13C
NMR (100 MHz, CDCl3): d 134.6 (C); 125.2 (CH); 74.3 (C); 68.9 (CH);
40.7 (CH); 33.9 (CH2); 31.1 (CH3); 30.7 (CH3); 28.0 (CH2); 21.2 (CH3). IR
(film) nmax: 3327; 2993; 2933; 2872; 1455; 1438; 1370; 1158; 1124; 1056
cm21. MS m/z (rel. intensity) (%): 137 [(M-51)þ] (46); 109 (63); 93 (31);
69 (34); 55 (38); 43 (78); 41 (100); 27 (46).
Compound (13): (+)-trans-5-Isopropenyl-2-methyl-2-cyclohexen-1-ol.[8d]
1H NMR (400 MHz, CDCl3): d 5.59 (ddq, 1H, J1 ¼ 5.0, J2 ¼ 2.0, and
J3 ¼ 1.5 Hz); 4.75 (dq, 1H, J1 ¼ 2.0 and J2 ¼ 1.5 Hz); 4.73 (dq, 1H,
J1 ¼ 2.0 and J2 ¼ 1.0 Hz); 4.03 (dt, 1H, J1 ¼ 4.0, and J2 ¼ 2.0 Hz); 2.33
M. G. Constantino et al.3536
Dow
nloa
ded
By:
[Ins
titut
o de
Qui
mic
a] A
t: 18
:25
7 O
ctob
er 2
007
(tddd, 1H, J1 ¼ 12.0, J2 ¼ 5.0, J3 ¼ 4.0, and J4¼ 2.0 Hz); 2.33 (tddd, 1H,
J1 ¼ 12.0, J2 ¼ 5.0, J3 ¼ 4.0, and J4 ¼ 4.0 Hz) 2.15 (dtt, 1H, J1 ¼ 17.0,
J2 ¼ 5.0, and J3 ¼ 1.5 Hz); 1.94 (dddd, 1H, J1 ¼ 13.6, J2 ¼ 4.0, J3 ¼ 2.0,
and J4 ¼ 1.5); 1.88 (m, 1H); 1.83 (m, 1H); 1.81 (m, 3H); 1.75 (s, 3H). 13C
NMR (100 MHz, CDCl3): d 149.2 (C); 134.1 (C); 125.4 (CH); 109.0 (CH2);
68.6 (CH); 36.7 (CH2); 35.2 (CH); 31.0 (CH2); 20.9 (2 CH3). IR (film)
nmax: 3388; 2963; 1646; 1446; 1374; 1289; 1260; 1056 cm21. MS m/z(rel. intensity) (%): 109 [(M-43)þ] (6); 70 (6); 69 (9); 61 (9); 55 (6); 43
(100); 29 (40); 27 (27).
Compound (14): (+)-cis-6-Chloro-1,7,7-trimethyl-bicyclo[2.2.1]-heptan-2-
ol. 1H NMR (400 MHz, CDCl3): d 4.39 (ddd, 1H, J1 ¼ 11.0, J2 ¼ 4.8, and
J3 ¼ 2.3 Hz); 4.18 (br.s, 1H); 2.66 (dddd, 1H, J1 ¼ 13.6, J2 ¼ 11.0,
J3 ¼ 4.8, and J4 ¼ 3.2 Hz); 2.51 (dddd, 1H, J1 ¼ 13.6, J2 ¼ 11.0, J3 ¼ 4.8,
and J4 ¼ 3.2 Hz), 1.80 (t, 1H, J ¼ 4.8 Hz); 1.72 (dd, 1H, J1 ¼ 13.6 and
J2 ¼ 4.8 Hz); 1.30 (dd, 1H, J1 ¼ 13.6 and J2 ¼ 4.8 Hz); 1.08 (s, 3H); 0.92
(s, 3H); 0.88 (s, 3H). 13C NMR (100 MHz, CDCl3): d 79.7 (CH); 67.0
(CH); 51.4 (C); 49.1 (C); 43.1 (CH); 40.7 (CH2); 39.5 (CH2); 20.1 (2 CH3);
11.6 (CH3). IR (film) nmax: 3327; 2993; 2933; 2872; 1455; 1438; 1370;
1158; 1124; 1056 cm21. MS m/z (rel. intensity) (%): 137 [(M-51)þ] (24);
135 (40); 109 (51); 108 (100); 93 (66); 67 (21); 41 (57); 27 (39).
Compound (15): trans-6-(1-Chloro-1-methyl-ethyl)-2-hydroxy-3-methyl-
cyclohex-3-enone. 1H NMR (400 MHz, CDCl3): d 5.61 (m, 1H); 4.78
(m, 1H); 2.69 (m, 1H); 2.58 (m, 2H); 1.81 (m, 3H); 1.73 (s, 3H); 1.65 (s, 3H).13C NMR (100 MHz, CDCl3): d 209.3 (C); 136.8 (C); 120.6 (CH); 75.6 (CH);
69.8 (C); 53.9 (CH); 32.1 (CH3); 31.3 (CH3); 26.6 (CH2); 17.9 (CH3).
Compound (16): (4-Isoproprenyl-cyclohex-1-enyl)-methanol.[8e] 1H NMR
(400 MHz, CDCl3): d 5.70 (m, 1H); 4.73 (m, 2H); 4.01 (m, 2H); 2.15
(m, 4H); 2.10 (br. s, 1H, OH); 1.97 (m, 1H); 1.87 (m, 1H); 1.73 (m, 4H).13C NMR (100 MHz, CDCl3): d 148.9 (C); 136.4 (C); 121.6 (CH); 107.8
(CH2); 66.4 (CH2); 40.2 (CH); 29.5 (CH2); 26.6 (CH2); 25.2 (CH2); 19.9
(CH3).
Compound (17): [4-(1-Chloro-1-methyl-ethyl)-cyclohex-1-enyl] methanol.1H NMR (400 MHz, CDCl3): d 5.68 (m, 1H); 4.01 (d, 1H, J ¼ 14.6 Hz);
3.99 (d, 1H, J ¼ 14.6 Hz); 2.26 (m, 1H); 2.17 (m, 1H); 2.10 (m, 1H); 1.98
(m, 1H); 1.77 (dddd, 1H, J1 ¼ 12.0, J2 ¼ 11.0, J3 ¼ 4.0, and J4 ¼ 2.0 Hz);
1.75 (m, 1H); 1.60 (s, 3H); 1.56 (m, 3H); 1.39 (ddd, 1H, J1 ¼ 12.0,
J2 ¼ 6.0, and J3 ¼ 1.0 Hz). 13C NMR (100 MHz, CDCl3): d 137.8 (C);
122.3 (CH); 74.6 (C); 67.3 (CH2); 46.9 (CH); 31.0 (CH3); 30.3 (CH3); 27.5
(CH2); 26.8 (CH2); 24.8 (CH2).
Compound (18): 2-[4-(Hydroxy-methyl)-cyclohex-3-enyl) propan-2-ol.[8f]
1H NMR (400 MHz, CDCl3): d 5.62 (m, 1H); 3.95 (d, 1H, J ¼ 14.0 Hz);
3.91 (d, 1H, J ¼ 14.0 Hz); 2.05 (m, 3H); 1.89 (m, 1H, dddt, J1 ¼ 11.0,
Epoxide Ring Opening 3537
Dow
nloa
ded
By:
[Ins
titut
o de
Qui
mic
a] A
t: 18
:25
7 O
ctob
er 2
007
J2 ¼ 5.0, J3 ¼ 2.5, and J4 ¼ 2.0 Hz); 1.79 (m, 1H); 1.48 (dddd, 1H, J1 ¼ 13.0,
J2 ¼ 12.0, J3 ¼ 5.0, and J4 ¼ 2.0 Hz); 1.20 (tdd, 1H, J1 ¼ 12.0, J2 ¼ 11.0,
and J3 ¼ 5.0 Hz); 1.14 (s, 3H); 1.12 (s, 3H). 13C NMR (100 MHz, CDCl3):
d 136.5 (C); 121.4 (CH); 71.7 (C); 66.1 (CH2); 44.1 (CH); 26.4 (CH3); 25.6
(CH2); 25.5 (CH2); 25.4 (CH3); 22.6 (CH2).
Compound (19): trans-2-Hydroxy-5-isopropenyl-2-methyl-3-oxo-cyclohexyl-
acetate. 1H NMR (400 MHz, CDCl3): d 4.88 (dd, 1H J1 ¼ 9.5 and
J2 ¼ 3.8 Hz); 4.81 (m, 1H); 4.67 (m, 1H); 2.80 (ddd, 1H, J1 ¼ 13.9,
J2 ¼ 5.0, and J3 ¼ 1.7 Hz); 2.64 (quint, 1H, J ¼ 5.0 Hz); 2.57 (dd, 1H,
J1 ¼ 13.9 and J2 ¼ 5.0 Hz); 2.30 (dddd, 1H, J1 ¼ 13.8, J2 ¼ 5.0, J3 ¼ 3.8,
and J4 ¼ 1.7 Hz); 2.02 (s, 3H); 1.83 (ddd, 1H, J1 ¼ 13.8, J2 ¼ 9.5, and
J3 ¼ 5.0 Hz); 1.72 (m, 3H); 1.30 (s, 3H). 13C NMR (100 MHz, CDCl3): d
211.1 (C); 170.5 (C); 145.6 (C); 112.9 (CH2); 78.0 (C); 76.2 (CH); 40.8
(CH2); 38.5 (CH); 30.4 (CH2); 21.9 (CH3); 21.5 (CH3); 20.7 (CH3).
Compound (20): trans-2-Chloro-3-hydroxy-5-isopropenyl-2-methyl-cyclo-
hexanone.[8g] 1H NMR (400 MHz, CDCl3): d 4.81 (m, 1H); 4.78 (m, 1H);
4.26 (dd, 1H, J1 ¼ 3.7 and J2 ¼ 2.6 Hz); 3.04 (dd, 1H, J1 ¼ 13.8 and
J2 ¼ 12.6 Hz); 2.84 (tt, 1H, J1 ¼ 12.6 and J2 ¼ 3.7 Hz); 2.43 (ddd, 1H,
J1 ¼ 14.1, J2 ¼ 12.6, and J3 ¼ 2.6 Hz); 2.38 (ddd, 1H, J1 ¼ 13.8, J2 ¼ 3.7,
and J3 ¼ 2.2 Hz); 1.93 (dtd, 1H, J1 ¼ 14.1, J2 ¼ 3.7, and J3 ¼ 2.2 Hz); 1.76
(m, 3H); 1.65 (s, 3H). 13C NMR (100 MHz, CDCl3): d 205.4 (C); 146.5
(C); 110.6 (CH2); 76.8 (CH); 68.0 (C); 41.1 (CH2); 39.0 (CH); 32.8 (CH2);
22.1 (CH3); 20.3 (CH3).
ACKNOWLEDGMENTS
The authors thank the Fundacao de Amparo a Pesquisa do Estado de Sao Paulo
(FAPESP), the Conselho Nacional de Desenvolvimento Cientıfico e Tecnolo-
gico (CNPq), the Coordenadoria de Aperfeicoamento de Pessoal do Nıvel
Superior (CAPES), and the Financiadora de Estudos e Projetos (FINEP) for
financial support. We also thank CBMM–Companhia Brasileira de Mineralo-
gia e Mineracao for NbCl5 samples.
REFERENCES
1. Constantino, M. G.; Beatriz, A.; da Silva, G. V. J.; Zukerman-Schpector, J.Synthetic studies on the Diels–Alder adduct from 3,4-dimethoxyfuran and benzo-quinone. Synth. Comm. 2001, 31, 3329–3336.
2. Constantino, M. G.; Beatriz, A.; da Silva, G. V. J. A model synthesis of the bicycliccore structure of the furanoheliangolide sesquiterpenes. Tetrahedron Lett. 2000,41, 7001–7004.
M. G. Constantino et al.3538
Dow
nloa
ded
By:
[Ins
titut
o de
Qui
mic
a] A
t: 18
:25
7 O
ctob
er 2
007
3. Constantino, M. G.; Lacerda, V., Jr.; Aragao, V. Niobium pentachloride catalysedring opening of epoxides. Molecules 2001, 6, 770–776.
4. Constantino, M. G.; Lacerda, V., Jr.; da Silva Filho, L. C.; da Silva, G. V. J.Niobium (V) chloride mediated preparation of b-chloro-a,b-unsaturatedketones. Lett. Org. Chem. 2004, 1, 360–364.
5. Constantino, M. G.; Lacerda, V., Jr.; da Silva, G. V. J. An efficient synthesis of3-hydroxychromone using niobium pentachloride. J. Heterocycl. Chem. 2003,40, 369–371.
6. Constantino, M. G.; Lacerda, V., Jr.; da Silva, G. V. J. Niobium pentachloride acti-vation of enone derivatives: Diels–Alder and conjugate addition products.Molecules 2002, 7, 456–465.
7. Constantino, M. G.; da Silva Filho, L. C.; Lacerda, V., Jr.; da Silva, G. V. J.Invernize, P. R. High stereoselectivity on low temperature Diels–Alderreactions. Beil. J. Org. Chem. 2005, 1, 14.
8. (a) Chapuis, C.; Brauchli, R. Preparation of campholenal analogs—Chirons for thelipophilic moiety of sandalwood-like odorant alcohols. Helv. Chim. Acta 1992, 75,1527–1546; (b) Kluge, R.; Schuls, M.; Liebsch, S. Diastereoselective epoxidationof olefins by organo sulfonic peracids. Tetrahedron 1996, 52, 2957–2976;(c) Daniewski, A. R.; Garofalo, L. M.; Hutchings, S. D.; Kabat, M. M.; Liu, W.;Okabe, M.; Radinov, R.; Yiannikouros, G. P. Efficient synthesis of the A-ringphosphine oxide building block useful for a,25-dihydroxy vitamin D-3 andanalogues. J. Org. Chem. 2002, 67, 1580–1587; (d) Motherwell, W. B.;Bingham, M. J.; Pothier, J.; Six, Y. A study of some molecularly imprintedpolymers as protic catalysts for the isomerisation of a-pinene oxide to trans-carveol. Tetrahedron 2004, 60, 3231–3241; (e) Fisher, G. B.; Fuller, J. C.;Harrison, J.; Alvarez, S. G.; Burkhardt, E. R.; Goraski, C. T.; Singaram, B. Ami-noborohydrides, 4: The synthesis and characterization of lithium aminoborohy-drides—A new class of powerful, selective, air-stable reducing agents. J. Org.Chem. 1994, 59, 6378–6385; (f) Pirrung, M. C.; Lee, Y. R. Photochemicallyremovable silyl protecting groups. J. Org. Chem. 1993, 58, 6961–6963;(g) Miyazawa, M.; Ohsawa, M. Biotransformation of a-terpineol by the larvaeof common cutworm (Spodoptera litura). J. Agric. Food Chem. 2002, 50,4916–4918; (h) Bajwa, J. S.; Anderson, R. C. A highly regioselective conversionof epoxides to halohydrins by lithium halides. Tetrahedron Lett. 1991, 32,3021–3024.
9. Robinson, M. W. C.; Pillinger, K. S.; Graham, A. E. Highly efficient Meinwaldrearrangement reactions of epoxides catalyzed by copper tetrafluoroborate. Tetra-hedron Lett. 2006, 47, 5919–5921.
10. Neri, G.; Rizzo, G.; Crisafulli, C.; De Luca, L.; Donato, A.; Musolino, M. G.;Pietropaolo, R. Isomerization of a-pinene oxide to campholenic aldehyde overLewis acids supported on silica and titania nanoparticles. Appl. Catal. A—Gen.2005, 295, 116–125.
11. Castro, J. M.; Linares-Palomino, P. J.; Salido, S.; Altarejos, J.; Nogueras, M.;Sanchez, A. Enatiospecific synthesis, separation and olfactory evaluation of alldiastereomers of a homologue of the sandalwood odorant Polysantol. Tetrahedron2005, 61, 11192–11203.
12. Hartshorn, M. P.; Kirk, D. N.; Wallis, A. F. A. Reaction of a-pinene oxide withboron trifluoride. J. Chem. Soc. 1964, 5494–5496.
Epoxide Ring Opening 3539
Top Related